1184 lines
37 KiB
Plaintext
1184 lines
37 KiB
Plaintext
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
|
|
-- $Id: fspim.mib,v 1.12 2012/10/29 12:01:31 siva Exp $
|
|
|
|
-- Introduction
|
|
|
|
-- This document explains the propreitary MIB implemented for the PIM
|
|
-- product.
|
|
|
|
-- The proprietary MIB definitions, which mostly contains extra statistic
|
|
-- objects and few objects for configuring the threshold to switch over to
|
|
-- shortest path tree.
|
|
|
|
-- To the Standard MIB RFC2934.txt, few scalars and few
|
|
-- statistic objects are added
|
|
|
|
|
|
-- The scalars in this MIB
|
|
|
|
-- fsPimVersionString This scalar holds the Software Version
|
|
-- number of the PIM protocol running in
|
|
-- the router.
|
|
|
|
|
|
-- fsPimJoinPruneInterval This scalar is same as defined in the
|
|
-- Standard MIB rfc2934.txt
|
|
|
|
|
|
-- fsPimSPTGroupThreshold This scalar allows to configure the
|
|
-- threshold for switching over to
|
|
-- Shortest Path Tree. It is based
|
|
-- on Bits per second.
|
|
|
|
-- fsPimSPTSourceThreshold This scalar allows to configure the
|
|
-- threshold for switching over to
|
|
-- Shortest path Tree. It is based on
|
|
-- the Bits per Second.
|
|
|
|
-- fsPimSPTSwitchingPeriod This scalar allows to configure the
|
|
-- period for which the threshold is
|
|
-- computed.
|
|
|
|
-- fsPimSPTRpThreshold This scalar allows to configure the
|
|
-- threshold at which shortest path trees
|
|
-- are initiated for the RPT Route(s) that
|
|
-- match this entry.
|
|
|
|
-- fsPimSPTRpSwitchingPeriod This scalar allows to configure the
|
|
-- period for which the threshold is
|
|
-- computed.
|
|
|
|
|
|
-- The Tables in the MIB
|
|
|
|
-- fsPimInterfaceTable pimInterfaceTable is same as given in Standard MIB
|
|
-- except for an object is added to monitor the number
|
|
-- of packets discarded as invalid packet in this
|
|
-- interface.
|
|
|
|
-- fsPimNeighborTable pimNeighborTable is same as given in Standard MIB
|
|
-- except for few objects added for knowing the GenId
|
|
-- and to monitor the number of packets discarded as
|
|
-- invalid.
|
|
|
|
-- fsPimIpMRouteTable pimIpMRouteTable is same as given in Standard MIB
|
|
-- except for few objects added for viewing the
|
|
-- Multicast Route Table as given in the IPv4
|
|
-- Multicast Routing MIB and an object to monitor
|
|
-- number packets routed.
|
|
|
|
-- fsPimIpMRouteNextHopTable pimIpMRouteNextHopTable is same as given in
|
|
-- Standard MIB except for few objects added for
|
|
-- viewing the next hop table.
|
|
|
|
|
|
-- fsPimCandidateRPTable pimCandidateRPTable is same as given in Standard
|
|
-- MIB, except the RPPriority is added.
|
|
|
|
|
|
|
|
-- Management Information Base for PIM Product
|
|
|
|
SUPERMICRO-PIM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, IpAddress, TimeTicks,
|
|
Counter32, enterprises FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus, TruthValue,
|
|
DisplayString FROM SNMPv2-TC;
|
|
|
|
fsPimMIB MODULE-IDENTITY
|
|
-- LAST-UPDATED "200006050000Z"
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO "support@Supermicro.com"
|
|
DESCRIPTION "The MIB module for management of PIM Routers
|
|
Initial Version"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION "The MIB module for management of PIM Routers
|
|
Initial Version"
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 20 }
|
|
|
|
-- Textual Convention
|
|
-- This Textual Convention enhance the readability of the specification.
|
|
|
|
Status ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the fsPimGlobalDebug"
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
|
|
-- The ID 20 for futurePim is temp not allocated one
|
|
-- future OBJECT IDENTIFIER ::= { enterprises 2076}
|
|
-- futurePim OBJECT IDENTIFIER ::= { future 20 }
|
|
-- fsPimMIB OBJECT IDENTIFIER ::= { futurePim 1 }
|
|
|
|
|
|
fsPimMIBObjects OBJECT IDENTIFIER ::= { fsPimMIB 1 }
|
|
|
|
futurePimScalars OBJECT IDENTIFIER ::= { fsPimMIBObjects 1 }
|
|
futurePimTables OBJECT IDENTIFIER ::= { fsPimMIBObjects 2 }
|
|
futurePimTraps OBJECT IDENTIFIER ::= { fsPimMIBObjects 3 }
|
|
|
|
|
|
-- SCALAR_TABLE_BEGIN
|
|
|
|
fsPimVersionString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the PIM protocol in the router"
|
|
::= { futurePimScalars 1 }
|
|
|
|
--
|
|
-- Start of mib objects for data rate monitoring by the last hop router
|
|
--
|
|
|
|
fsPimSPTGroupThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold of data rate for any group when exceeded,
|
|
source specific counters are initiated for that particular group
|
|
It is based on number of bits per sec.
|
|
To initiate SPT switching counter, this threshold MUST be
|
|
configured"
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 2 }
|
|
|
|
fsPimSPTSourceThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold of data rate for any source when exceeded,
|
|
switching to Shortest Path Tree is initiated.
|
|
It is based on number of bits per sec.
|
|
To switch to SPT, this threshold MUST be configured"
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 3 }
|
|
|
|
fsPimSPTSwitchingPeriod OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period (in seconds)over which the data rate
|
|
is to be monitored for intiating source specific
|
|
counting or initiating switch to shortest path tree.
|
|
Same period is used for monitoring data rate for
|
|
both source and group.
|
|
To switch to SPT, this period MUST be configured"
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 4 }
|
|
|
|
--
|
|
-- End of mib objects for data rate monitoring by the last hop router
|
|
--
|
|
|
|
|
|
--
|
|
-- Start of mib objects for monitoring number of register message by the RP
|
|
--
|
|
|
|
fsPimSPTRpThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold at which the RP initiates switching to
|
|
Source specific shortest path.It is based on number
|
|
of registered packets received.
|
|
To switch to SPT, this threshold MUST be configured"
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 5 }
|
|
|
|
fsPimSPTRpSwitchingPeriod OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period (in seconds) over which RP monitors
|
|
register packets for switching to the source specific
|
|
shortest path tree.
|
|
To switch to SPT, this period MUST be configured"
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 6 }
|
|
|
|
--
|
|
-- End of mib objects for monitoring number of register message by the RP
|
|
--
|
|
|
|
|
|
--
|
|
-- Start of mib objects for Register stop rate limitation
|
|
--
|
|
|
|
|
|
fsPimRegStopRateLimitingPeriod OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period (in seconds) over which RP monitors number of
|
|
register packets after sending the register stop message
|
|
to the source of the register message for rate limiting the
|
|
sending of register stop message"
|
|
DEFVAL { 5 }
|
|
::= { futurePimScalars 7 }
|
|
|
|
--
|
|
-- End of mib objects for register stop rate limitation
|
|
--
|
|
|
|
|
|
fsPimMemoryAllocFailCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This counter holds the number of memory allocation failures "
|
|
::= { futurePimScalars 8 }
|
|
|
|
fsPimGlobalTrace OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is used to enable Trace Statements in PIM Module.
|
|
A four byte integer value is specified for enabling the level
|
|
of tracing.Each Bit in the four byte integer variable represents
|
|
a level of Trace. The bits represents the levels as
|
|
follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path,
|
|
3 - Control Plane, 4 - packet Dump, 5 - All resources except
|
|
buffer, 6 - All Failures, 7 - Buffer. The remaining
|
|
bits are unused. The combination of levels are also allowed.
|
|
For example if the bits 1 and 2 are set, then the Trace
|
|
statements related to management and Data Path will be printed.
|
|
The administrator have to enter the corresponding integer value
|
|
for the bits set. For example if bits 1 and 2 are set then
|
|
admin has to give the value 6."
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 9 }
|
|
|
|
fsPimGlobalDebug OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is used to enable Debug statements in PIM.
|
|
A Four byte integer value is specified for enabling the
|
|
level of debugging. Each bit in the four byte integer
|
|
variable represents a level of debugging. The combination of
|
|
levels are also allowed. The user have to enter the
|
|
corresponding integer value for the bit set."
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 10 }
|
|
|
|
fsPimPmbrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { disable (1), enable (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The border bit which identifies the router as a border router"
|
|
DEFVAL { 1 }
|
|
::= { futurePimScalars 11 }
|
|
|
|
fsPimRouterMode OBJECT-TYPE
|
|
SYNTAX INTEGER { ssmonly (1), smssm (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mode of the Pim-SM router (ssm_only or sm_ssm )"
|
|
DEFVAL { 2 }
|
|
::= { futurePimScalars 12 }
|
|
|
|
fsPimStaticRpEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disable (0),enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag which indicating that static configuration of RP is
|
|
available"
|
|
|
|
DEFVAL { 0 }
|
|
::= { futurePimScalars 13 }
|
|
|
|
fsPimStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled status of Multicast Routing by PIM on this router."
|
|
::= { futurePimScalars 14 }
|
|
|
|
|
|
|
|
-- SCALAR_TABLE_END
|
|
|
|
|
|
--
|
|
-- The PIM Interface Table
|
|
--
|
|
|
|
fsPimInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's PIM interfaces.
|
|
IGMP and PIM are enabled on all interfaces listed in this
|
|
table."
|
|
::= { futurePimTables 1 }
|
|
|
|
fsPimInterfaceEntry OBJECT-TYPE
|
|
SYNTAX FsPimInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the fsPimInterfaceTable."
|
|
INDEX { fsPimInterfaceIfIndex }
|
|
::= { fsPimInterfaceTable 1 }
|
|
|
|
FsPimInterfaceEntry ::= SEQUENCE {
|
|
fsPimInterfaceIfIndex Integer32,
|
|
fsPimInterfaceCompId Integer32,
|
|
fsPimInterfaceDRPriority Unsigned32,
|
|
fsPimInterfaceHelloHoldTime Integer32,
|
|
fsPimInterfaceLanPruneDelayPresent INTEGER,
|
|
fsPimInterfaceLanDelay Integer32,
|
|
fsPimInterfaceOverrideInterval Integer32,
|
|
fsPimInterfaceGenerationId Integer32,
|
|
fsPimInterfaceSuppressionInterval Integer32,
|
|
fsPimInterfaceAdminStatus Integer32,
|
|
fsPimInterfaceBorderBit Integer32
|
|
}
|
|
|
|
fsPimInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of this PIM interface."
|
|
::= { fsPimInterfaceEntry 1 }
|
|
|
|
fsPimInterfaceCompId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is the component Id of the component to which the
|
|
interface belongs to"
|
|
DEFVAL { 1 }
|
|
::= { fsPimInterfaceEntry 2 }
|
|
|
|
|
|
fsPimInterfaceDRPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DR priority value configured for Hello message for that
|
|
router per interface"
|
|
DEFVAL { 1 }
|
|
::= {fsPimInterfaceEntry 3 }
|
|
|
|
fsPimInterfaceHelloHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hold time configured for the Hello message for that
|
|
router per interface"
|
|
::= { fsPimInterfaceEntry 4 }
|
|
|
|
fsPimInterfaceLanPruneDelayPresent OBJECT-TYPE
|
|
SYNTAX INTEGER {disable (0), enable (1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LanPruneDelayPresent bit configured for the router per
|
|
interface"
|
|
DEFVAL { 0 }
|
|
::= { fsPimInterfaceEntry 5 }
|
|
|
|
fsPimInterfaceLanDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LanPruneDelayPresent bit configured for the router per
|
|
interface"
|
|
DEFVAL { 0 }
|
|
::= { fsPimInterfaceEntry 6 }
|
|
|
|
fsPimInterfaceOverrideInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Override Interval configured for the router per interface"
|
|
DEFVAL { 0 }
|
|
::= { fsPimInterfaceEntry 7}
|
|
|
|
fsPimInterfaceGenerationId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Generation identifier of the router. This is used by
|
|
neighbour routers to quickly detect router reboot and
|
|
synchronize RP-Set information and forwarding states by triggering
|
|
Bootstrap and Join/Prune messages to the rebooted router"
|
|
::= { fsPimInterfaceEntry 8 }
|
|
|
|
fsPimInterfaceSuppressionInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface suppression period "
|
|
::= { fsPimInterfaceEntry 9 }
|
|
|
|
fsPimInterfaceAdminStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface Administrative Status "
|
|
::= { fsPimInterfaceEntry 10 }
|
|
|
|
fsPimInterfaceBorderBit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates this interface is border interface or not,
|
|
1-- border interface, 0(default value)-- Normal interface."
|
|
::= { fsPimInterfaceEntry 11 }
|
|
|
|
--
|
|
-- The PIM Neighbor Table
|
|
--
|
|
|
|
fsPimNeighborTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPimNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's PIM neighbors."
|
|
::= { futurePimTables 2 }
|
|
|
|
fsPimNeighborEntry OBJECT-TYPE
|
|
SYNTAX FsPimNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the fsPimNeighborTable."
|
|
INDEX { fsPimNeighborAddress, fsPimNeighborCompId }
|
|
::= { fsPimNeighborTable 1 }
|
|
|
|
FsPimNeighborEntry ::= SEQUENCE {
|
|
fsPimNeighborAddress IpAddress,
|
|
fsPimNeighborCompId Integer32,
|
|
fsPimNeighborIfIndex Integer32,
|
|
fsPimNeighborUpTime TimeTicks,
|
|
fsPimNeighborExpiryTime TimeTicks,
|
|
fsPimNeighborGenerationId Integer32,
|
|
fsPimNeighborLanDelay Integer32,
|
|
fsPimNeighborDRPriority Unsigned32,
|
|
fsPimNeighborOverrideInterval Integer32
|
|
}
|
|
|
|
fsPimNeighborAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the PIM neighbor for which this entry
|
|
contains information."
|
|
::= { fsPimNeighborEntry 1 }
|
|
|
|
fsPimNeighborCompId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The component Id of this neighbor table "
|
|
::= { fsPimNeighborEntry 2 }
|
|
|
|
fsPimNeighborIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface used to reach this
|
|
PIM neighbor."
|
|
::= { fsPimNeighborEntry 3 }
|
|
|
|
fsPimNeighborUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this PIM neighbor (last) became a neighbor
|
|
of the local router."
|
|
::= { fsPimNeighborEntry 4 }
|
|
|
|
fsPimNeighborExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before this PIM neighbor will be
|
|
aged out."
|
|
::= { fsPimNeighborEntry 5 }
|
|
|
|
fsPimNeighborGenerationId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Generation identifier of the router. This is used by
|
|
neighbour routers to quickly detect router reboot and synchronize
|
|
RP-Set information and forwarding states by triggering Bootstrap
|
|
and Join/Prune messages to the rebooted router"
|
|
::= { fsPimNeighborEntry 6 }
|
|
|
|
|
|
fsPimNeighborLanDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LanDelay configured for this PIM neighbor"
|
|
::= { fsPimNeighborEntry 7 }
|
|
|
|
fsPimNeighborDRPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DR priority value configured for this PIM neighbor"
|
|
::= { fsPimNeighborEntry 8 }
|
|
|
|
fsPimNeighborOverrideInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Override Interval configured for this PIM neighbor"
|
|
::= { fsPimNeighborEntry 9}
|
|
|
|
--
|
|
-- The PIM IP Multicast Route Table
|
|
--
|
|
|
|
fsPimIpMRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPimIpMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM multicast routing information"
|
|
::= { futurePimTables 3 }
|
|
|
|
fsPimIpMRouteEntry OBJECT-TYPE
|
|
SYNTAX FsPimIpMRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the fsPimIpMRouteTable. There
|
|
is one entry for each incoming interface running PIM"
|
|
INDEX { fsPimIpMRouteCompId, fsPimIpMRouteGroup, fsPimIpMRouteSource, fsPimIpMRouteSourceMask }
|
|
::= { fsPimIpMRouteTable 1 }
|
|
|
|
FsPimIpMRouteEntry ::= SEQUENCE {
|
|
fsPimIpMRouteCompId Integer32,
|
|
fsPimIpMRouteGroup IpAddress,
|
|
fsPimIpMRouteSource IpAddress,
|
|
fsPimIpMRouteSourceMask IpAddress,
|
|
fsPimIpMRouteUpstreamNeighbor IpAddress,
|
|
fsPimIpMRouteInIfIndex Integer32,
|
|
fsPimIpMRouteUpTime TimeTicks,
|
|
fsPimIpMRoutePkts Counter32,
|
|
fsPimIpMRouteUpstreamAssertTimer TimeTicks,
|
|
fsPimIpMRouteAssertMetric Integer32,
|
|
fsPimIpMRouteAssertMetricPref Integer32,
|
|
fsPimIpMRouteAssertRPTBit TruthValue,
|
|
fsPimIpMRouteTimerFlags Integer32,
|
|
fsPimIpMRouteFlags Integer32
|
|
}
|
|
|
|
fsPimIpMRouteCompId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The component Id of this table"
|
|
::= { fsPimIpMRouteEntry 1 }
|
|
|
|
fsPimIpMRouteGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address for which this entry
|
|
contains multicast routing information."
|
|
::= { fsPimIpMRouteEntry 2 }
|
|
|
|
fsPimIpMRouteSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address which when combined with the
|
|
corresponding value of ipMRouteSourceMask identifies the
|
|
sources for which this entry contains multicast routing
|
|
information."
|
|
::= { fsPimIpMRouteEntry 3 }
|
|
|
|
fsPimIpMRouteSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask which when combined with the corresponding
|
|
value of ipMRouteSource identifies the sources for which
|
|
this entry contains multicast routing information."
|
|
::= { fsPimIpMRouteEntry 4 }
|
|
|
|
fsPimIpMRouteUpstreamNeighbor OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the upstream neighbor (e.g., RPF neighbor)
|
|
from which IP datagrams from these sources to this multicast
|
|
address are received."
|
|
::= { fsPimIpMRouteEntry 5 }
|
|
|
|
fsPimIpMRouteInIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface on which IP
|
|
datagrams sent by these sources to this multicast address
|
|
are received."
|
|
::= { fsPimIpMRouteEntry 6 }
|
|
|
|
fsPimIpMRouteUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since the multicast routing information
|
|
represented by this entry was learned by the router."
|
|
::= { fsPimIpMRouteEntry 7 }
|
|
|
|
fsPimIpMRoutePkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets which this router has received from
|
|
these sources and addressed to this multicast group
|
|
address."
|
|
::= { fsPimIpMRouteEntry 8 }
|
|
|
|
fsPimIpMRouteUpstreamAssertTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining before the router changes its upstream
|
|
neighbor back to its RPF neighbor. This timer is called the
|
|
Assert timer in the PIM Sparse and Dense mode specification.
|
|
A value of 0 indicates that no Assert has changed the
|
|
upstream neighbor away from the RPF neighbor."
|
|
::= { fsPimIpMRouteEntry 9 }
|
|
|
|
fsPimIpMRouteAssertMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric advertised by the assert winner on the upstream
|
|
interface, or 0 if no such assert is in received."
|
|
::= { fsPimIpMRouteEntry 10 }
|
|
|
|
fsPimIpMRouteAssertMetricPref OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference advertised by the assert winner on the
|
|
upstream interface, or 0 if no such assert is in effect."
|
|
::= { fsPimIpMRouteEntry 11 }
|
|
|
|
fsPimIpMRouteAssertRPTBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the RPT-bit advertised by the assert winner on
|
|
the upstream interface, or false if no such assert is in
|
|
effect."
|
|
::= { fsPimIpMRouteEntry 12 }
|
|
|
|
fsPimIpMRouteTimerFlags OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes PIM-specific Timer flags related to a
|
|
Multicast Route Entry. If the bit is 1 indicates that timer
|
|
is started for that entry. The bits corresponding to the
|
|
timers are as follows:
|
|
0 - JP Suppression Timer, 1 - Oif Timer, 2 - Entry Timer,
|
|
3 - Reg Suppression Timer, 4 - Assert Timer,
|
|
5 - RandomDelayJoin Timer.
|
|
For example, If this object value is 3 (0000 0011), then
|
|
it means that JPSuppression timer and Oif timer are running.
|
|
This is for both SM and DM. The bits which are not applicable
|
|
to DM/SM will be filled with 0 "
|
|
::= { fsPimIpMRouteEntry 13 }
|
|
|
|
fsPimIpMRouteFlags OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes PIM-specific flags related to a
|
|
multicast state entry. See the PIM Sparse Mode
|
|
specification for the meaning of the RPT and SPT bits."
|
|
::= { fsPimIpMRouteEntry 14 }
|
|
|
|
|
|
|
|
--
|
|
-- The PIM Next Hop Table
|
|
--
|
|
|
|
fsPimIpMRouteNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPimIpMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing PIM information on the next hops
|
|
on outgoing interfaces for forwarding multicast datagrams"
|
|
::= { futurePimTables 4 }
|
|
|
|
fsPimIpMRouteNextHopEntry OBJECT-TYPE
|
|
SYNTAX FsPimIpMRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the fsPimIpMRouteNextHopTable.
|
|
There is one entry per entry in the ipMRouteNextHopTable
|
|
whose interface is running PIM and whose
|
|
fsPimIpMRouteNextHopState is pruned(1)."
|
|
INDEX { fsPimIpMRouteNextHopCompId,
|
|
fsPimIpMRouteNextHopGroup, fsPimIpMRouteNextHopSource,
|
|
fsPimIpMRouteNextHopSourceMask, fsPimIpMRouteNextHopIfIndex,
|
|
fsPimIpMRouteNextHopAddress }
|
|
::= { fsPimIpMRouteNextHopTable 1 }
|
|
|
|
FsPimIpMRouteNextHopEntry ::= SEQUENCE {
|
|
fsPimIpMRouteNextHopCompId Integer32,
|
|
fsPimIpMRouteNextHopGroup IpAddress,
|
|
fsPimIpMRouteNextHopSource IpAddress,
|
|
fsPimIpMRouteNextHopSourceMask IpAddress,
|
|
fsPimIpMRouteNextHopIfIndex Integer32,
|
|
fsPimIpMRouteNextHopAddress IpAddress,
|
|
fsPimIpMRouteNextHopPruneReason INTEGER,
|
|
fsPimIpMRouteNextHopState INTEGER
|
|
}
|
|
|
|
fsPimIpMRouteNextHopCompId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The component Id for this table "
|
|
::= { fsPimIpMRouteNextHopEntry 1 }
|
|
|
|
fsPimIpMRouteNextHopGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group for which this entry specifies a
|
|
next-hop on an outgoing interface."
|
|
::= { fsPimIpMRouteNextHopEntry 2 }
|
|
|
|
fsPimIpMRouteNextHopSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address which when combined with the
|
|
corresponding value of fsPimIpMRouteNextHopSourceMask identifies
|
|
the sources for which this entry specifies a next-hop on an
|
|
outgoing interface."
|
|
::= { fsPimIpMRouteNextHopEntry 3 }
|
|
|
|
fsPimIpMRouteNextHopSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask which when combined with the corresponding
|
|
value of fsPimIpMRouteNextHopSource identifies the sources for
|
|
which this entry specifies a next-hop on an outgoing interface"
|
|
::= { fsPimIpMRouteNextHopEntry 4 }
|
|
|
|
fsPimIpMRouteNextHopIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface for the outgoing
|
|
interface for this next-hop."
|
|
::= { fsPimIpMRouteNextHopEntry 5 }
|
|
|
|
fsPimIpMRouteNextHopAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the next-hop specific to this entry. For
|
|
most interfaces, this is identical to fsPimIpMRouteNextHopGroup.
|
|
NBMA interfaces, however, may have multiple next-hop
|
|
addresses out a single outgoing interface."
|
|
::= { fsPimIpMRouteNextHopEntry 6 }
|
|
|
|
fsPimIpMRouteNextHopPruneReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forwarding (0),
|
|
other (1),
|
|
prune (2),
|
|
assert (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates why the downstream interface was
|
|
pruned, whether in response to a PIM prune message or due to
|
|
PIM Assert processing."
|
|
::= { fsPimIpMRouteNextHopEntry 7 }
|
|
|
|
fsPimIpMRouteNextHopState OBJECT-TYPE
|
|
SYNTAX INTEGER { pruned(1), forwarding(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of whether the outgoing interface and next-
|
|
hop represented by this entry is currently being used to
|
|
forward IP datagrams. The value 'forwarding' indicates it
|
|
is currently being used; the value 'pruned' indicates it is
|
|
not."
|
|
::= { fsPimIpMRouteNextHopEntry 8 }
|
|
|
|
|
|
--
|
|
-- The PIM Candidate-RP Table
|
|
--
|
|
|
|
fsPimCandidateRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPimCandidateRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the IP multicast groups for
|
|
which the local router is to advertise itself as a
|
|
Candidate-RP when the value of fsPimComponentCRPHoldTime is
|
|
non-zero. If this table is empty, then the local router
|
|
will advertise itself as a Candidate-RP for all groups
|
|
(providing the value of fsPimComponentCRPHoldTime is non-
|
|
zero)."
|
|
::= { futurePimTables 6 }
|
|
|
|
fsPimCandidateRPEntry OBJECT-TYPE
|
|
SYNTAX FsPimCandidateRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the fsPimCandidateRPTable."
|
|
INDEX { fsPimCandidateRPCompId,
|
|
fsPimCandidateRPGroupAddress,
|
|
fsPimCandidateRPGroupMask,
|
|
fsPimCandidateRPAddress}
|
|
::= { fsPimCandidateRPTable 1 }
|
|
|
|
FsPimCandidateRPEntry ::= SEQUENCE {
|
|
fsPimCandidateRPCompId Integer32,
|
|
fsPimCandidateRPGroupAddress IpAddress,
|
|
fsPimCandidateRPGroupMask IpAddress,
|
|
fsPimCandidateRPAddress IpAddress,
|
|
fsPimCandidateRPPriority Integer32,
|
|
fsPimCandidateRPRowStatus RowStatus
|
|
}
|
|
|
|
fsPimCandidateRPCompId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Component Id for this table "
|
|
::= { fsPimCandidateRPEntry 1 }
|
|
|
|
fsPimCandidateRPGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address which, when combined with
|
|
fsPimCandidateRPGroupMask, identifies a group prefix for which
|
|
the local router will advertise itself as a Candidate-RP."
|
|
::= { fsPimCandidateRPEntry 2 }
|
|
|
|
fsPimCandidateRPGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group address mask which, when combined with
|
|
fsPimCandidateRPGroupMask, identifies a group prefix for which
|
|
the local router will advertise itself as a Candidate-RP."
|
|
::= { fsPimCandidateRPEntry 3 }
|
|
|
|
fsPimCandidateRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (unicast) address of the interface which will be
|
|
advertised as a Candidate-RP."
|
|
::= { fsPimCandidateRPEntry 4 }
|
|
|
|
fsPimCandidateRPPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of the interface which will be
|
|
advertised as a Candidate-RP."
|
|
::= { fsPimCandidateRPEntry 5 }
|
|
|
|
fsPimCandidateRPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { fsPimCandidateRPEntry 6 }
|
|
|
|
|
|
--
|
|
-- The PIM Static RP-Set Table
|
|
--
|
|
|
|
fsPimStaticRPSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPimStaticRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the IP multicast groups for
|
|
which the routers are available as the RP through static
|
|
configuration."
|
|
|
|
::= { futurePimTables 7 }
|
|
|
|
fsPimStaticRPSetEntry OBJECT-TYPE
|
|
SYNTAX FsPimStaticRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the pimStaticRPSetTable."
|
|
INDEX { fsPimStaticRPSetCompId, fsPimStaticRPSetGroupAddress,
|
|
fsPimStaticRPSetGroupMask}
|
|
::= { fsPimStaticRPSetTable 1 }
|
|
|
|
FsPimStaticRPSetEntry ::= SEQUENCE {
|
|
fsPimStaticRPSetCompId Integer32,
|
|
fsPimStaticRPSetGroupAddress IpAddress,
|
|
fsPimStaticRPSetGroupMask IpAddress,
|
|
fsPimStaticRPAddress IpAddress,
|
|
fsPimStaticRPRowStatus RowStatus
|
|
}
|
|
|
|
fsPimStaticRPSetCompId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Component Id for this table "
|
|
::= { fsPimStaticRPSetEntry 1 }
|
|
|
|
fsPimStaticRPSetGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address which, when combined with
|
|
pimStaticRPSetGroupMask, gives the group prefix for which this
|
|
entry contains information about the RP."
|
|
::= { fsPimStaticRPSetEntry 2 }
|
|
|
|
fsPimStaticRPSetGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast group address mask which, when combined with
|
|
pimStaticRPSetGroupAddress, gives the group prefix for which this
|
|
entry contains information about the RP."
|
|
::= { fsPimStaticRPSetEntry 3 }
|
|
|
|
fsPimStaticRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the interface which will be
|
|
static configured as the RP."
|
|
::= { fsPimStaticRPSetEntry 4 }
|
|
|
|
fsPimStaticRPRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { fsPimStaticRPSetEntry 5 }
|
|
|
|
--
|
|
-- fsPimComponentModeTable
|
|
--
|
|
|
|
|
|
fsPimComponentModeTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF FsPimComponentModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the components modes)."
|
|
::= { futurePimTables 8 }
|
|
|
|
fsPimComponentModeEntry OBJECT-TYPE
|
|
SYNTAX FsPimComponentModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the fsPimComponentModeTable."
|
|
INDEX { fsPimComponentId }
|
|
::= { fsPimComponentModeTable 1 }
|
|
|
|
FsPimComponentModeEntry ::= SEQUENCE {
|
|
fsPimComponentId Integer32,
|
|
fsPimComponentMode INTEGER,
|
|
fsPimCompGraftRetryCount Integer32
|
|
}
|
|
|
|
fsPimComponentId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Component Id for this table "
|
|
::= { fsPimComponentModeEntry 1 }
|
|
|
|
fsPimComponentMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dense (1),
|
|
sparse (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mode of the component. A value of
|
|
1 indicates the component is running in DM mode and value of
|
|
2 indicated that the component is running in DM mode"
|
|
|
|
DEFVAL { 2 }
|
|
::= { fsPimComponentModeEntry 2 }
|
|
|
|
fsPimCompGraftRetryCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The value indicates the number of retries that can be made to
|
|
send the graft message"
|
|
|
|
DEFVAL { 1 }
|
|
::= { fsPimComponentModeEntry 3 }
|
|
|
|
-- Register Checksum Config Table
|
|
|
|
fsPimRegChkSumCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPimRegChkSumCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing RPs configured in CISCO Router"
|
|
::= { futurePimTables 9 }
|
|
|
|
|
|
fsPimRegChkSumCfgEntry OBJECT-TYPE
|
|
SYNTAX FsPimRegChkSumCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the fsPimRegChkSumCfgTable."
|
|
INDEX {fsPimRegChkSumTblCompId, fsPimRegChkSumTblRPAddress }
|
|
::= { fsPimRegChkSumCfgTable 1 }
|
|
|
|
FsPimRegChkSumCfgEntry ::= SEQUENCE {
|
|
fsPimRegChkSumTblCompId Integer32,
|
|
fsPimRegChkSumTblRPAddress IpAddress,
|
|
fsPimRPChkSumStatus INTEGER
|
|
}
|
|
|
|
fsPimRegChkSumTblCompId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Component Id for this table, This configuration is valid
|
|
only for a sparse mode component."
|
|
::= { fsPimRegChkSumCfgEntry 1 }
|
|
|
|
fsPimRegChkSumTblRPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP Address of the router to which the Register
|
|
checksum should be calculated."
|
|
::= { fsPimRegChkSumCfgEntry 2 }
|
|
|
|
fsPimRPChkSumStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this Row, by which new entries may be created
|
|
If the RowStatus is set, then the Register Message checksum
|
|
should be calculated including the data packet other wise for
|
|
for any RP address not part of this table checksum
|
|
should be sent as per the draft-ietf-pim-sm-new-v2"
|
|
::= { fsPimRegChkSumCfgEntry 3 }
|
|
|
|
|
|
END
|
|
|