1371 lines
45 KiB
Plaintext
1371 lines
45 KiB
Plaintext
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
|
|
-- $Id: fsmirip.mib,v 1.8 2013/06/19 13:30:03 siva Exp $
|
|
|
|
-- /*****************************************************************
|
|
-- * *
|
|
-- * fsmirip.mib *
|
|
-- * *
|
|
-- * Rip components extracted from fsmirip.mib PLUS *
|
|
-- * *
|
|
-- * fsMIRip2Propagate scalar object to enable *
|
|
-- * Static Route Propagation in RIP *
|
|
-- * fsMIRip2MaxRoutes scalar object which defines *
|
|
-- * maximum RIP Routes *
|
|
-- * fsMIRipTrcFlag scalar object to enable tracing in RIP *
|
|
-- * *
|
|
-- ****************************************************************/
|
|
-- Proprietary Support
|
|
|
|
SUPERMICRO-MIRIP2-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE,IpAddress,
|
|
Counter32, Integer32 FROM SNMPv2-SMI
|
|
enterprises FROM SNMPv2-SMI
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
InterfaceIndex FROM IF-MIB
|
|
--fsMIStdRip2PeerAddress FROM SUPERMICRO-MISTDRIP2-MIB
|
|
TruthValue, RowStatus, DisplayString, DateAndTime FROM SNMPv2-TC;
|
|
|
|
|
|
fsMIRip MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO "support@Supermicro.com"
|
|
DESCRIPTION " The Proprietary RIP MI MIB"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION " The Proprietary RIP MI MIB"
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 151}
|
|
|
|
fsMIRip2GeneralGroup OBJECT IDENTIFIER ::= { fsMIRip 1 }
|
|
fsMIRipRRDGeneralGroup OBJECT IDENTIFIER ::= { fsMIRip 2 }
|
|
fsMIRip2TrapsControl OBJECT IDENTIFIER ::= { fsMIRip 5 }
|
|
fsMIRip2Notification OBJECT IDENTIFIER ::= { fsMIRip 6 }
|
|
|
|
fsMIRip2GlobalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRip2GlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Table Contains the list of globals for a
|
|
Context."
|
|
::= { fsMIRip2GeneralGroup 1 }
|
|
|
|
fsMIRip2GlobalEntry OBJECT-TYPE
|
|
SYNTAX FsMIRip2GlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of fsMIRip2GlobalTable."
|
|
INDEX { fsMIRipContextId }
|
|
::= { fsMIRip2GlobalTable 1 }
|
|
|
|
FsMIRip2GlobalEntry ::=
|
|
SEQUENCE {
|
|
fsMIRipContextId Integer32,
|
|
fsMIRip2Security INTEGER,
|
|
fsMIRip2Peers Integer32,
|
|
fsMIRip2TrustNBRListEnable INTEGER,
|
|
fsMIRip2NumberOfDroppedPkts Counter32,
|
|
fsMIRip2SpacingEnable INTEGER,
|
|
fsMIRip2AutoSummaryStatus INTEGER,
|
|
fsMIRip2RetransTimeoutInt Integer32,
|
|
fsMIRip2MaxRetransmissions Integer32,
|
|
fsMIRip2OverSubscriptionTimeout Integer32,
|
|
fsMIRip2Propagate INTEGER,
|
|
fsMIRipTrcFlag Integer32,
|
|
fsMIRipRowStatus RowStatus,
|
|
fsMIRipAdminStatus INTEGER,
|
|
fsMIRip2LastAuthKeyLifetimeStatus TruthValue,
|
|
fsMIRipRtCount Integer32
|
|
}
|
|
|
|
|
|
fsMIRipContextId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the Rip Domain Context."
|
|
::= { fsMIRip2GlobalEntry 1 }
|
|
|
|
fsMIRip2Security OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
minimumSecurity(1),
|
|
maximumSecurity(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A variable denotes the security level of RIP-2
|
|
in the system. The value `minimumSecurity` denotes
|
|
that the RIP1 packets will be accepted even when
|
|
authentication is in use. The value `maximumSecurity`
|
|
denotes that RIP1 packets will be ignored when
|
|
authentication is in use"
|
|
DEFVAL { maximumSecurity }
|
|
::= {fsMIRip2GlobalEntry 2 }
|
|
|
|
fsMIRip2Peers OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of peers that can be in conversation
|
|
with the RIP2 system simultaneously"
|
|
DEFVAL { 5 }
|
|
::= {fsMIRip2GlobalEntry 3 }
|
|
|
|
fsMIRip2TrustNBRListEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of neighbor list in the router.
|
|
The value 'enabled' denotes that a list of
|
|
router's IP address can be configured and
|
|
RIP Packets from those router's will be processed
|
|
by RIP and packets from other Routers will be dropped.
|
|
'Disabled' denotes that RIP Packet from all the
|
|
router's will be processed."
|
|
DEFVAL { disabled }
|
|
::= { fsMIRip2GlobalEntry 4 }
|
|
|
|
fsMIRip2NumberOfDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of RIP Packets dropped because of
|
|
neighbor list check."
|
|
::= { fsMIRip2GlobalEntry 5 }
|
|
|
|
fsMIRip2SpacingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether spacing is enabled or not. If spacing
|
|
is enabled, generation of periodic update packet
|
|
will be split and send."
|
|
DEFVAL { disabled }
|
|
::= { fsMIRip2GlobalEntry 6 }
|
|
|
|
fsMIRip2AutoSummaryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specify the auto-summary status.If
|
|
enabled, summary routes are sent in regular updates for
|
|
both rip v1 and v2.If split hoizon is enabled, summary
|
|
is sent only if atlest one subnet route is learned over
|
|
an interface which is different from the interface over
|
|
which the update is sent.If all the subnet routes
|
|
are learned over the same interface over which updates
|
|
are sent, then summary is not send.
|
|
With poisson reverse enabled, summary is sent either
|
|
with metric 16 or with proper metric according to the
|
|
interfaces over which subnet routes were learnt.
|
|
If summary is disabled, either individual subnet route
|
|
are sent or subnet routes are sent based on the
|
|
specfic aggregation configured over the interface."
|
|
DEFVAL { enabled }
|
|
::= { fsMIRip2GlobalEntry 7 }
|
|
|
|
-- MIB Objects for Triggered RIP
|
|
|
|
fsMIRip2RetransTimeoutInt OBJECT-TYPE
|
|
SYNTAX Integer32 (5..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout interval to be used to retransmit the Update
|
|
request packet or an unacknowledged update response packet."
|
|
DEFVAL { 5 }
|
|
::= { fsMIRip2GlobalEntry 8 }
|
|
|
|
fsMIRip2MaxRetransmissions OBJECT-TYPE
|
|
SYNTAX Integer32 (10..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of retransmissions of the update request and
|
|
update response packets. If no response is received then the routes
|
|
via the next hop router are marked unreachable."
|
|
DEFVAL { 36 }
|
|
::= {fsMIRip2GlobalEntry 9 }
|
|
|
|
fsMIRip2OverSubscriptionTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (100..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Over subscription timeout value as mentioned in RFC 2091.When a
|
|
Circuit DOWN message is received from the circuit manager, this
|
|
timer will be started for the specified timeout value."
|
|
DEFVAL { 180 }
|
|
::= { fsMIRip2GlobalEntry 10 }
|
|
|
|
fsMIRip2Propagate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is propagation of static route is enabled or not. If it
|
|
is enabled then routing protocols (like RIP) are allowed
|
|
to include static routes in the update messages."
|
|
DEFVAL { disable }
|
|
::= { fsMIRip2GlobalEntry 11 }
|
|
|
|
fsMIRipTrcFlag OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables the tracing in the RIP. A 32 bit integer
|
|
is used to store the Tracing level in the specified module.
|
|
Different Tracing Levels -
|
|
BIT 0 - Initialisation and Shutdown Trace.
|
|
BIT 1 - Management trace.
|
|
BIT 2 - Data path trace.
|
|
BIT 3 - Control Plane trace.
|
|
BIT 4 - Packet Dump.
|
|
BIT 5 - OS Resource trace.
|
|
BIT 6 - All Failure trace (All failures including Packet Validation)
|
|
BIT 7 - Buffer Trace."
|
|
DEFVAL { 0 }
|
|
::= { fsMIRip2GlobalEntry 12 }
|
|
|
|
fsMIRipRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to
|
|
row installation and removal conventions."
|
|
::= { fsMIRip2GlobalEntry 13 }
|
|
|
|
fsMIRipAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled (1), disabled (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of RIP in a particular
|
|
router context. The value 'enabled' denotes that
|
|
the RIP Process is active; 'disabled' disables it
|
|
on all inter-faces."
|
|
DEFVAL { disabled }
|
|
::= { fsMIRip2GlobalEntry 14 }
|
|
|
|
fsMIRip2LastAuthKeyLifetimeStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag that decides whether the last authentication key on expiry,
|
|
should take its lifetime to be infinite or not. If this object is set
|
|
to true the last key on expiry resets its lifetime to be infinite and
|
|
continues to be the Key until new Authentication key id is configured.
|
|
If this object is configured to be false, then it should not send RIP
|
|
updates once the last key is expired. The received RIP updates from
|
|
the peer will be dropped after the last available key has expired and
|
|
the object is set not TRUE.
|
|
|
|
TRUE - The last key will be treated as having infinite life time.
|
|
FALSE - After the last key expires, the received RIP updates will be
|
|
dropped and the routes may tear down. No updates will be sent
|
|
on that interface."
|
|
DEFVAL { true }
|
|
::= { fsMIRip2GlobalEntry 15 }
|
|
|
|
fsMIRipRtCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes in a particular context"
|
|
::= { fsMIRip2GlobalEntry 16 }
|
|
|
|
--SCALAR_TABLE_END fsMIRip2GeneralGroup
|
|
|
|
fsMIRipGlobalTrcFlag OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables Global tracing in the RIP. A 32 bit integer
|
|
is used to store the Tracing level in the specified module.
|
|
Different Tracing Levels -
|
|
BIT 0 - Initialisation and Shutdown Trace.
|
|
BIT 1 - Management trace.
|
|
BIT 2 - Data path trace.
|
|
BIT 3 - Control Plane trace.
|
|
BIT 4 - Packet Dump.
|
|
BIT 5 - OS Resource trace.
|
|
BIT 6 - All Failure trace (All failures including Packet Validation)
|
|
BIT 7 - Buffer Trace."
|
|
DEFVAL { 0 }
|
|
::= {fsMIRip2GeneralGroup 2}
|
|
-- fsMIRip2NBRsTrustListTable
|
|
|
|
fsMIRip2NBRTrustListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRip2NBRTrustListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of Router addresses
|
|
from which you can receive RIP Packets"
|
|
::= { fsMIRip2GeneralGroup 3 }
|
|
|
|
fsMIRip2NBRTrustListEntry OBJECT-TYPE
|
|
SYNTAX FsMIRip2NBRTrustListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of fsMIRip2NBRTrustListTable."
|
|
INDEX { fsMIRipContextId,fsMIRip2TrustNBRIpAddr }
|
|
::= { fsMIRip2NBRTrustListTable 1 }
|
|
|
|
|
|
FsMIRip2NBRTrustListEntry ::=
|
|
SEQUENCE {
|
|
fsMIRip2TrustNBRIpAddr
|
|
IpAddress,
|
|
fsMIRip2TrustNBRRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
fsMIRip2TrustNBRIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ipaddress of the Router from which this router
|
|
can accept RIP Packets"
|
|
::= { fsMIRip2NBRTrustListEntry 1 }
|
|
|
|
fsMIRip2TrustNBRRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to
|
|
row installation and removal conventions."
|
|
::= { fsMIRip2NBRTrustListEntry 2 }
|
|
|
|
|
|
|
|
|
|
--fsMIRip2IfConfTable
|
|
|
|
fsMIRip2IfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of subnets which require separate
|
|
configuration in RIP."
|
|
::= { fsMIRip2GeneralGroup 4 }
|
|
|
|
fsMIRip2IfConfEntry OBJECT-TYPE
|
|
SYNTAX FsMIRip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Single Routing Domain in a single Subnet."
|
|
INDEX { fsMIRipContextId , fsMIRip2IfConfAddress }
|
|
::= { fsMIRip2IfConfTable 1 }
|
|
|
|
FsMIRip2IfConfEntry ::=
|
|
SEQUENCE {
|
|
fsMIRip2IfConfAddress
|
|
IpAddress,
|
|
fsMIRip2IfAdminStat
|
|
INTEGER,
|
|
fsMIRip2IfConfOperState
|
|
INTEGER,
|
|
fsMIRip2IfConfUpdateTmr
|
|
Integer32,
|
|
fsMIRip2IfConfGarbgCollectTmr
|
|
Integer32,
|
|
fsMIRip2IfConfRouteAgeTmr
|
|
Integer32,
|
|
fsMIRip2IfSplitHorizonStatus
|
|
INTEGER,
|
|
fsMIRip2IfConfDefRtInstall
|
|
INTEGER,
|
|
fsMIRip2IfConfSpacingTmr
|
|
Integer32,
|
|
fsMIRip2IfConfInUseKey
|
|
Integer32,
|
|
fsMIRip2IfConfAuthLastKeyStatus
|
|
TruthValue
|
|
}
|
|
|
|
fsMIRip2IfConfAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this system on the indicated
|
|
subnet. For unnumbered interfaces, the value 0.0.0.N,
|
|
where the least significant 24 bits (N) is the ifIndex
|
|
for the IP Interface in network byte order."
|
|
::= { fsMIRip2IfConfEntry 1 }
|
|
|
|
fsMIRip2IfAdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
passive(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of RIP-2 in the
|
|
router. The value 'enabled' denotes that the
|
|
RIP2 Process is active throughout the system.
|
|
'disabled' disables RIP2 Process in the system.
|
|
'passive' denotes that the RIP2 Process runs as
|
|
a passive one"
|
|
::= { fsMIRip2IfConfEntry 2 }
|
|
|
|
fsMIRip2IfConfOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operup (1),
|
|
operdown (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Operational Status of the Interface "
|
|
DEFVAL { operdown }
|
|
::= { fsMIRip2IfConfEntry 3 }
|
|
|
|
fsMIRip2IfConfUpdateTmr OBJECT-TYPE
|
|
SYNTAX Integer32 (10..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval Time Between Updates"
|
|
DEFVAL { 30 }
|
|
::= { fsMIRip2IfConfEntry 4 }
|
|
|
|
fsMIRip2IfConfGarbgCollectTmr OBJECT-TYPE
|
|
SYNTAX Integer32(120..180)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Interval before deleting an entry after not hearing
|
|
it. Also the advertisements of this entry is set to
|
|
INFINITY while sending to others "
|
|
DEFVAL { 120 }
|
|
::= { fsMIRip2IfConfEntry 5 }
|
|
|
|
fsMIRip2IfConfRouteAgeTmr OBJECT-TYPE
|
|
SYNTAX Integer32 (30..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Time after which the entry is put into garbage collect
|
|
interval "
|
|
DEFVAL { 180 }
|
|
::= { fsMIRip2IfConfEntry 6 }
|
|
|
|
fsMIRip2IfSplitHorizonStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
splitHorizon(1),
|
|
splitHorizonWithPoisRev(2),
|
|
disable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to denote the split horizon operational status
|
|
in the system. The value `splitHorizon` denotes that
|
|
splitHorizon should be applied in the response packets
|
|
that are going out"
|
|
DEFVAL { splitHorizonWithPoisRev }
|
|
::= { fsMIRip2IfConfEntry 7 }
|
|
|
|
fsMIRip2IfConfDefRtInstall OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
installDefRt(1),
|
|
doNotInstallDefRt(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag that decides whether the default route received over this
|
|
interface should be installed to rip database or not."
|
|
DEFVAL { doNotInstallDefRt }
|
|
::= { fsMIRip2IfConfEntry 8 }
|
|
|
|
fsMIRip2IfConfSpacingTmr OBJECT-TYPE
|
|
SYNTAX Integer32(0..360)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of route entries are greater than 25 , regular updates
|
|
(response packets are sent for every fsMIRip2IfConfUpdateTmr
|
|
interval) are sent in multiple packets.
|
|
Spacing Provides the interval between the
|
|
packets.For value zero spacing will be disabled.Maximum value is 10%
|
|
of the fsMIRip2IfConfUpdateTmr object maximum value."
|
|
DEFVAL { 0 }
|
|
::= { fsMIRip2IfConfEntry 9 }
|
|
|
|
fsMIRip2IfConfInUseKey OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the active authentication KeyID that is currently used
|
|
in the particular interface for sending RIP updates."
|
|
::= { fsMIRip2IfConfEntry 10 }
|
|
|
|
fsMIRip2IfConfAuthLastKeyStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A flag to indicate that the last key configured on a RIP interface
|
|
has expired or not.This object is updated during transmission and
|
|
reception of RIP updates.
|
|
|
|
TRUE - The last key on this particular interface is expired.
|
|
FALSE - The last key on this particular interface is not yet expired."
|
|
DEFVAL { false }
|
|
::= { fsMIRip2IfConfEntry 11 }
|
|
|
|
|
|
-- MD5 Authentiacation table for RIP.
|
|
|
|
fsMIRipMd5AuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRipMd5AuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD5 Authentication table for RIP."
|
|
::= { fsMIRip2GeneralGroup 5 }
|
|
|
|
fsMIRipMd5AuthEntry OBJECT-TYPE
|
|
SYNTAX FsMIRipMd5AuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in to the MD5 Authentiaction table. More than one
|
|
entry can be configured for an interface."
|
|
INDEX { fsMIRipContextId ,fsMIRipMd5AuthAddress, fsMIRipMd5AuthKeyId }
|
|
::= { fsMIRipMd5AuthTable 1 }
|
|
|
|
FsMIRipMd5AuthEntry ::=
|
|
SEQUENCE {
|
|
fsMIRipMd5AuthAddress IpAddress,
|
|
fsMIRipMd5AuthKeyId Integer32,
|
|
fsMIRipMd5AuthKey OCTET STRING,
|
|
fsMIRipMd5KeyStartTime Integer32,
|
|
fsMIRipMd5KeyExpiryTime Integer32,
|
|
fsMIRipMd5KeyRowStatus RowStatus
|
|
}
|
|
|
|
fsMIRipMd5AuthAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of this system on the indicated
|
|
subnet. For unnumbered interfaces, the value 0.0.0.N,
|
|
where the least significant 24 bits (N) is the ifIndex
|
|
for the IP Interface in network byte order. RIP should
|
|
have been enabled for this IP address and the rip2IfConfAuthType
|
|
should be MD5 for creating this entry."
|
|
::= { fsMIRipMd5AuthEntry 1 }
|
|
|
|
fsMIRipMd5AuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key ID for this key. This should be unique for the same
|
|
fsMIRipMd5AuthAddress. This enables the configuration of more than
|
|
one key for an interface."
|
|
::= { fsMIRipMd5AuthEntry 2 }
|
|
|
|
|
|
fsMIRipMd5AuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key.
|
|
If a string shorter than 16 octets is supplied, it will be
|
|
left- justified and padded to 16 octets, on the right,
|
|
with nulls (0x00).
|
|
Reading this object always results in an OCTET
|
|
STRING of length zero; authentication may not
|
|
be bypassed by reading the MIB object."
|
|
::= { fsMIRipMd5AuthEntry 3 }
|
|
|
|
fsMIRipMd5KeyStartTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the router will start accepting or generating the
|
|
packets that have been created with this key.
|
|
The start time of the key should be less than the expiry time of
|
|
the previous key.
|
|
During the overlap interval, the next key will be used in the
|
|
generation of the authentication messages.The start time of the first
|
|
key should be zero."
|
|
::= { fsMIRipMd5AuthEntry 4 }
|
|
|
|
fsMIRipMd5KeyExpiryTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the router will stop accepting the packets that have
|
|
been created with this key. This time will be indicated (in the
|
|
number of seconds) from the start time of the key. If the expiry time
|
|
of a key is zero, it means that, the key should be used for the
|
|
infinite amount of time. If this key is the last key then that key
|
|
will be used for the infinite amount of time or until the new key
|
|
is configured."
|
|
::= { fsMIRipMd5AuthEntry 5 }
|
|
|
|
fsMIRipMd5KeyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row by which a new entry can be created or
|
|
deleted by setting this object to the appropriate value as
|
|
mentioned in SMI-v2.If this entry is made active, then no other
|
|
entry in the table will be allowed to modify. The entry can be in
|
|
deleted from the table."
|
|
::= { fsMIRipMd5AuthEntry 6 }
|
|
|
|
-- Crypto Authentication table for RIP.
|
|
|
|
fsMIRipCryptoAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRipCryptoAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Crypto Authentication table for RIP."
|
|
::= { fsMIRip2GeneralGroup 9 }
|
|
|
|
fsMIRipCryptoAuthEntry OBJECT-TYPE
|
|
SYNTAX FsMIRipCryptoAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in to the Crypto Authentication table. More than one
|
|
entry can be configured for an interface."
|
|
INDEX { fsMIRipContextId ,fsMIRipCryptoAuthIfIndex, fsMIRipCryptoAuthAddress,
|
|
fsMIRipCryptoAuthKeyId }
|
|
::= { fsMIRipCryptoAuthTable 1 }
|
|
|
|
FsMIRipCryptoAuthEntry ::=
|
|
SEQUENCE {
|
|
fsMIRipCryptoAuthIfIndex InterfaceIndex,
|
|
fsMIRipCryptoAuthAddress IpAddress,
|
|
fsMIRipCryptoAuthKeyId Integer32,
|
|
fsMIRipCryptoAuthKey OCTET STRING,
|
|
fsMIRipCryptoKeyStartAccept DateAndTime,
|
|
fsMIRipCryptoKeyStartGenerate DateAndTime,
|
|
fsMIRipCryptoKeyStopGenerate DateAndTime,
|
|
fsMIRipCryptoKeyStopAccept DateAndTime,
|
|
fsMIRipCryptoKeyStatus INTEGER
|
|
}
|
|
|
|
fsMIRipCryptoAuthIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value of the RIP interface."
|
|
::= { fsMIRipCryptoAuthEntry 1 }
|
|
|
|
fsMIRipCryptoAuthAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the IP Address on the interface.
|
|
Currently this IP Address will be taken as dont-care
|
|
value since IP Address specific authentication key
|
|
configuration is not supported. Only interface
|
|
specific key configuration is supported."
|
|
::= { fsMIRipCryptoAuthEntry 2 }
|
|
|
|
fsMIRipCryptoAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key ID for this key. This configured KeyID will be
|
|
sent in the RIP update packet. This object enables the
|
|
configuration of more than one key for an interface."
|
|
::= { fsMIRipCryptoAuthEntry 3 }
|
|
|
|
fsMIRipCryptoAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key.
|
|
If a string shorter than 16 octets is supplied, it will be
|
|
left- justified and padded to 16 octets, on the right,
|
|
with nulls (0x00).
|
|
Reading this object always results in an OCTET
|
|
STRING of length zero; authentication may not
|
|
be bypassed by reading the MIB object."
|
|
::= { fsMIRipCryptoAuthEntry 4 }
|
|
|
|
fsMIRipCryptoKeyStartAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the router will start accepting packets that have
|
|
been created with this key.If the value is not set, then it
|
|
will be taken as infinite and displayed as 2136-02-06,06:28:15,
|
|
DateTime equivalent to max value of UINT4.
|
|
For example, Tuesday May 26, 1992 at 1:30:15 PM should be
|
|
configured as, 1992-5-26,13:30:15.0"
|
|
::= { fsMIRipCryptoAuthEntry 5 }
|
|
|
|
fsMIRipCryptoKeyStartGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the router will start using this key for packets
|
|
generation.If the value is not set, then it will be taken
|
|
as infinite and displayed as 2136-02-06,06:28:15,
|
|
DateTime equivalent to max value of UINT4.
|
|
For example, Tuesday May 26, 1992 at 1:30:15 PM should be
|
|
configured as, 1992-5-26,13:30:15.0"
|
|
::= { fsMIRipCryptoAuthEntry 6 }
|
|
|
|
fsMIRipCryptoKeyStopGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the router will stop using this key for packets
|
|
generation.If the value is not set, then it will be taken
|
|
as infinite and displayed as 2136-02-06,06:28:15,
|
|
DateTime equivalent to max value of UINT4.
|
|
For example, Tuesday May 26, 1992 at 1:30:15 PM should be
|
|
configured as, 1992-5-26,13:30:15.0"
|
|
::= { fsMIRipCryptoAuthEntry 7 }
|
|
|
|
fsMIRipCryptoKeyStopAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time the router will stop accepting packets that have
|
|
been created with this key.If the value is not set, then it
|
|
will be taken as infinite and displayed as 2136-02-06,06:28:15,
|
|
DateTime equivalent to max value of UINT4.
|
|
For example, Tuesday May 26, 1992 at 1:30:15 PM should be
|
|
configured as, 1992-5-26,13:30:15.0"
|
|
::= { fsMIRipCryptoAuthEntry 8 }
|
|
|
|
fsMIRipCryptoKeyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { valid (1), delete (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the status of key configured on a RIP interface.
|
|
The value valid indicates that there is a valid keyID
|
|
configured on the interface. Before the Key is made
|
|
valid the Authentication Key must be configured.The
|
|
time related configurations can be done even after the
|
|
key status is made valid.
|
|
The value delete removes the key from the Key table for
|
|
the particular RIP interface."
|
|
::= { fsMIRipCryptoAuthEntry 9 }
|
|
|
|
-- fsMIRip2NBRsUnicastListTable
|
|
|
|
fsMIRip2NBRUnicastListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRip2NBRUnicastListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of Router addresses
|
|
from which you can receive RIP Packets"
|
|
::= { fsMIRip2GeneralGroup 6 }
|
|
|
|
fsMIRip2NBRUnicastListEntry OBJECT-TYPE
|
|
SYNTAX FsMIRip2NBRUnicastListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of fsMIRip2NBRUnicastListTable."
|
|
INDEX { fsMIRipContextId , fsMIRip2NBRUnicastIpAddr }
|
|
::= { fsMIRip2NBRUnicastListTable 1 }
|
|
|
|
FsMIRip2NBRUnicastListEntry ::=
|
|
SEQUENCE {
|
|
fsMIRip2NBRUnicastIpAddr
|
|
IpAddress,
|
|
fsMIRip2NBRUnicastNBRRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
fsMIRip2NBRUnicastIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ipaddress of the neighbour Router to which unicast
|
|
update has to be sent"
|
|
::= { fsMIRip2NBRUnicastListEntry 1 }
|
|
|
|
fsMIRip2NBRUnicastNBRRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to
|
|
row installation and removal conventions."
|
|
::= { fsMIRip2NBRUnicastListEntry 2 }
|
|
|
|
|
|
--fsMIRip2LocalRoutingTable
|
|
|
|
fsMIRip2LocalRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRip2LocalRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contain Local routing table entries "
|
|
::= { fsMIRip2GeneralGroup 7 }
|
|
|
|
fsMIRip2LocalRouteEntry OBJECT-TYPE
|
|
SYNTAX FsMIRip2LocalRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of routes in local routing table"
|
|
INDEX { fsMIRipContextId ,
|
|
fsMIRip2DestNet,
|
|
fsMIRip2DestMask,
|
|
fsMIRip2Tos,
|
|
fsMIRip2NextHop
|
|
}
|
|
::= { fsMIRip2LocalRouteTable 1 }
|
|
|
|
FsMIRip2LocalRouteEntry ::=
|
|
SEQUENCE {
|
|
fsMIRip2DestNet
|
|
IpAddress,
|
|
fsMIRip2DestMask
|
|
IpAddress,
|
|
fsMIRip2Tos
|
|
Integer32,
|
|
fsMIRip2NextHop
|
|
IpAddress,
|
|
fsMIRip2RtIfIndex
|
|
Integer32,
|
|
fsMIRip2RtType
|
|
Integer32,
|
|
fsMIRip2Proto
|
|
Integer32,
|
|
fsMIRip2ChgTime
|
|
Integer32,
|
|
fsMIRip2Metric
|
|
Integer32,
|
|
fsMIRip2RowStatus
|
|
Integer32,
|
|
fsMIRip2Gateway
|
|
IpAddress
|
|
}
|
|
|
|
fsMIRip2DestNet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the destination network"
|
|
::= { fsMIRip2LocalRouteEntry 1 }
|
|
|
|
fsMIRip2DestMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Destination mask for the destination network"
|
|
::= { fsMIRip2LocalRouteEntry 2 }
|
|
|
|
fsMIRip2Tos OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for Rip is always zero"
|
|
::= { fsMIRip2LocalRouteEntry 3 }
|
|
|
|
fsMIRip2NextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The The nexthop address to which any datagrams
|
|
destined to the destination,to be
|
|
forwarded. (In some special cases)"
|
|
|
|
::= { fsMIRip2LocalRouteEntry 4 }
|
|
|
|
fsMIRip2RtIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The interface through which the route is learnt"
|
|
::= { fsMIRip2LocalRouteEntry 5 }
|
|
|
|
fsMIRip2RtType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value for Rip is always zero"
|
|
::= { fsMIRip2LocalRouteEntry 6 }
|
|
|
|
fsMIRip2Proto OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol id == RIP (8 - 1)here"
|
|
::= { fsMIRip2LocalRouteEntry 7 }
|
|
|
|
fsMIRip2ChgTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the route is installed"
|
|
::= { fsMIRip2LocalRouteEntry 8 }
|
|
|
|
fsMIRip2Metric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reachability cost for the destination"
|
|
::= { fsMIRip2LocalRouteEntry 9 }
|
|
|
|
fsMIRip2RowStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status for perticular route entry"
|
|
::= { fsMIRip2LocalRouteEntry 10}
|
|
|
|
fsMIRip2Gateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway address to which any datagrams
|
|
destined to the destination, to be forwarded"
|
|
::= { fsMIRip2LocalRouteEntry 11}
|
|
|
|
-- The CIDR group
|
|
|
|
fsMIRipAggTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRipAggEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's
|
|
supernet routes.RIP advertises only supernet
|
|
routes on the speicified interface. And it
|
|
suppresses all routes which are subset of the supernet."
|
|
::= { fsMIRip2GeneralGroup 8 }
|
|
|
|
fsMIRipAggEntry OBJECT-TYPE
|
|
SYNTAX FsMIRipAggEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the
|
|
fsMIRipAggTable representing supertnet route for
|
|
the domain."
|
|
INDEX { fsMIRipContextId , fsMIRipIfIndex, fsMIRipAggAddress, fsMIRipAggAddressMask }
|
|
::= { fsMIRipAggTable 1 }
|
|
|
|
FsMIRipAggEntry ::=
|
|
SEQUENCE {
|
|
fsMIRipIfIndex Integer32,
|
|
fsMIRipAggAddress IpAddress,
|
|
fsMIRipAggAddressMask IpAddress,
|
|
fsMIRipAggStatus RowStatus
|
|
}
|
|
|
|
fsMIRipIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index over which the aggregation is configured."
|
|
::= { fsMIRipAggEntry 1 }
|
|
|
|
fsMIRipAggAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregated address which when combined with the
|
|
corresponding value of fsMIRipAggAddressMask
|
|
identifies the supernet route for this domain."
|
|
::= { fsMIRipAggEntry 2 }
|
|
|
|
fsMIRipAggAddressMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregated address mask which when combined with
|
|
the corresponding value of fsMIRipAggAddress
|
|
identifies the supernet route for the domain."
|
|
::= { fsMIRipAggEntry 3 }
|
|
|
|
fsMIRipAggStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row , by which new entries may be
|
|
created or old entries deleted from this table"
|
|
::= { fsMIRipAggEntry 4 }
|
|
|
|
|
|
-- MIB Definitions for the RIP Protocol to Support Route Redistribution:
|
|
|
|
-- NOTE : This will be appended to the FS IPRIP Propreitary MIB
|
|
|
|
-- MIB Definition for RRD Support Starts here
|
|
|
|
|
|
|
|
fsMIRipRRDGlobalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRipRRDGlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Table Contains the list of globals for a
|
|
Context."
|
|
::= { fsMIRipRRDGeneralGroup 1 }
|
|
|
|
fsMIRipRRDGlobalEntry OBJECT-TYPE
|
|
SYNTAX FsMIRipRRDGlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of fsMIRip2GlobalTable."
|
|
INDEX { fsMIRipContextId }
|
|
::= { fsMIRipRRDGlobalTable 1 }
|
|
|
|
FsMIRipRRDGlobalEntry ::=
|
|
SEQUENCE {
|
|
fsMIRipRRDGlobalStatus INTEGER,
|
|
fsMIRipRRDSrcProtoMaskEnable Integer32,
|
|
fsMIRipRRDSrcProtoMaskDisable Integer32,
|
|
fsMIRipRRDRouteTagType INTEGER,
|
|
fsMIRipRRDRouteTag Integer32,
|
|
fsMIRipRRDRouteDefMetric Integer32,
|
|
fsMIRipRRDRouteMapEnable DisplayString
|
|
}
|
|
|
|
fsMIRipRRDGlobalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object enables / disables RIP to participate
|
|
in Route Redistribution. If set to enabled then RIP will start
|
|
advertising the routes learned by other protocols. If set to
|
|
disabled then RIP will stop redistribution of routes
|
|
but will continue to send updates to the RTM."
|
|
DEFVAL { disabled }
|
|
::= {fsMIRipRRDGlobalEntry 1 }
|
|
|
|
fsMIRipRRDSrcProtoMaskEnable OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines the protocols from which the routes
|
|
have to be imported to RIP
|
|
Bit 1, if set indicates the routes have to be imported from the
|
|
local interface.
|
|
Bit 2, if set indicates the routes have to be imported from static route.
|
|
Bit 12, if set indicates the routes have to be imported from OSPF.
|
|
Bit 13, if set indicates the routes have to be imported from BGP."
|
|
DEFVAL { 0 }
|
|
::= { fsMIRipRRDGlobalEntry 2 }
|
|
|
|
fsMIRipRRDSrcProtoMaskDisable OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines the protocols from which the importing of
|
|
routes should be stopped to RIP
|
|
Bit 1, if set indicates the routes have to be imported from the
|
|
local interface.
|
|
Bit 2, if set indicates the routes have to be imported from static route.
|
|
Bit 12, if set indicates the routes have to be imported from OSPF.
|
|
Bit 13,if set indicates the routes have to be imported from BGP."
|
|
DEFVAL { 0 }
|
|
::= { fsMIRipRRDGlobalEntry 3 }
|
|
|
|
fsMIRipRRDRouteTagType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual (1),
|
|
automatic (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Tag Type MIB object describes whether Tags
|
|
will be automatically generated or will be manually
|
|
configured. If tags are manually configured , the
|
|
fsMIRipMIRRDRouteTag MIB has to be set with the Tag
|
|
value needed."
|
|
DEFVAL { manual }
|
|
::= { fsMIRipRRDGlobalEntry 4 }
|
|
|
|
fsMIRipRRDRouteTag OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Route Tag in case the user configures a Manual option for
|
|
the tags ."
|
|
DEFVAL { 0 }
|
|
::= { fsMIRipRRDGlobalEntry 5 }
|
|
|
|
fsMIRipRRDRouteDefMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default metric to be used for the imported routes from RTM."
|
|
DEFVAL { 3 }
|
|
::={ fsMIRipRRDGlobalEntry 6 }
|
|
|
|
fsMIRipRRDRouteMapEnable OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name Identifies the specified route-map
|
|
in the list of route-maps. If this Object needs to be
|
|
changed, first reset this object and then configure the
|
|
new value."
|
|
::={ fsMIRipRRDGlobalEntry 7 }
|
|
|
|
-- FILTERING OBJECT DEFINITION BEGIN
|
|
|
|
fsMIripDistInOutRouteMap OBJECT IDENTIFIER ::= { fsMIRip 3 }
|
|
|
|
fsMIRipDistInOutRouteMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRipDistInOutRouteMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing the configuration of filtering for route map."
|
|
::= { fsMIripDistInOutRouteMap 1 }
|
|
|
|
fsMIRipDistInOutRouteMapEntry OBJECT-TYPE
|
|
SYNTAX FsMIRipDistInOutRouteMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the filtering configuration of single entry."
|
|
INDEX {fsMIRipContextId, fsMIRipDistInOutRouteMapName, fsMIRipDistInOutRouteMapType}
|
|
::= { fsMIRipDistInOutRouteMapTable 1 }
|
|
|
|
FsMIRipDistInOutRouteMapEntry ::= SEQUENCE {
|
|
fsMIRipDistInOutRouteMapName DisplayString,
|
|
fsMIRipDistInOutRouteMapType Integer32,
|
|
fsMIRipDistInOutRouteMapValue Integer32,
|
|
fsMIRipDistInOutRouteMapRowStatus RowStatus
|
|
}
|
|
|
|
fsMIRipDistInOutRouteMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Route map name."
|
|
::= { fsMIRipDistInOutRouteMapEntry 1 }
|
|
|
|
fsMIRipDistInOutRouteMapType OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of route map to indicate the route map is for
|
|
distribute in or for distribute out or for distance.
|
|
1 - distance
|
|
2 - distribute in
|
|
3 - distribute out"
|
|
::= { fsMIRipDistInOutRouteMapEntry 2 }
|
|
|
|
fsMIRipDistInOutRouteMapValue OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Distance value ( this will be unused for distribute list )"
|
|
::= { fsMIRipDistInOutRouteMapEntry 3 }
|
|
|
|
fsMIRipDistInOutRouteMapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { fsMIRipDistInOutRouteMapEntry 4 }
|
|
|
|
-- FILTERING OBJECT DEFINITION END
|
|
|
|
-- PREFERENCE OBJECT DEFINITION BEGIN
|
|
|
|
fsMIripPreferenceGroup OBJECT IDENTIFIER ::= { fsMIRip 4 }
|
|
|
|
fsMIRipPreferenceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIRipPreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing preference value for RIP routes."
|
|
::= { fsMIripPreferenceGroup 1 }
|
|
|
|
fsMIRipPreferenceEntry OBJECT-TYPE
|
|
SYNTAX FsMIRipPreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing preference value of single entry."
|
|
INDEX { fsMIRipContextId }
|
|
::= { fsMIRipPreferenceTable 1 }
|
|
|
|
FsMIRipPreferenceEntry ::= SEQUENCE {
|
|
fsMIRipPreferenceValue Integer32
|
|
}
|
|
|
|
fsMIRipPreferenceValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preference value for RIP routes. Use '0' to set default value"
|
|
DEFVAL { 0 }
|
|
::= { fsMIRipPreferenceEntry 1 }
|
|
|
|
|
|
-- PREFERENCE OBJECT DEFINITION END
|
|
|
|
|
|
--- TRAP Notification for Crypto Authentication
|
|
|
|
fsMIRip2ContextId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the Rip Domain Context."
|
|
::= { fsMIRip2TrapsControl 1 }
|
|
|
|
fsMIRipAuthIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex (0..65535)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value of the RIP interface in which crypto
|
|
Authentication is enabled."
|
|
::= { fsMIRip2TrapsControl 2 }
|
|
|
|
fsMIRipAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key ID for this key. This configured KeyID will be
|
|
sent in the RIP update packet."
|
|
::= { fsMIRip2TrapsControl 3 }
|
|
|
|
fsMIRipPeerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the IP Address on the interface.
|
|
Specifies the Peer IP Address which has sent the RIP update."
|
|
::= { fsMIRip2TrapsControl 4 }
|
|
|
|
fsMIRip2Traps OBJECT IDENTIFIER ::= { fsMIRip2Notification 0 }
|
|
|
|
fsMIRip2AuthenticationFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIRip2ContextId,
|
|
fsMIRipPeerAddress,
|
|
fsMIRipAuthIfIndex,
|
|
fsMIRipAuthKeyId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fsMIRip2AuthenticationFailure trap signifies that the RIP
|
|
Authentication has failed due to invalid key ID, expired key ID
|
|
received in the RIP update.This trap should be generated when
|
|
the RIP update is received with invalid Key ID in the packet."
|
|
::= { fsMIRip2Traps 1 }
|
|
|
|
fsMIRip2AuthLastKey NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIRip2ContextId,
|
|
fsMIRipAuthIfIndex,
|
|
fsMIRipAuthKeyId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fsMIRip2AuthLastKey trap signifies that the last key
|
|
configured on a RIPv2 interface has expired.This trap should
|
|
be generated when the stop generate time of the last key configured
|
|
on a RIPv2 interface expires."
|
|
::= { fsMIRip2Traps 2 }
|
|
|
|
END
|
|
|