2621 lines
92 KiB
Plaintext
2621 lines
92 KiB
Plaintext
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
|
|
-- $Id: fsmef.mib,v 1.8 2013/09/21 11:42:20 siva Exp $
|
|
|
|
SUPERMICRO-MEF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, MODULE-IDENTITY, Integer32,Gauge32,Unsigned32,enterprises
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION,TruthValue,RowStatus,DisplayString,TimeInterval,TimeStamp,
|
|
MacAddress FROM SNMPv2-TC
|
|
IANAifType FROM IANAifType-MIB
|
|
VlanId FROM Q-BRIDGE-MIB
|
|
Dot1agCfmMepId,Dot1agCfmMepIdOrZero FROM IEEE8021-CFM-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
ifIndex,InterfaceIndex FROM IF-MIB
|
|
FsY1731TransmitStatus,FsY1731LmmInterval,FsY1731TimeRepresentation,
|
|
FsY1731AvailabilityInterval,FsY1731AvailabilityType
|
|
FROM SUPERMICRO-ECFM-Y1731-MI-MIB
|
|
IndexInteger FROM DIFFSERV-MIB
|
|
MeterColorMode, MeterType FROM SUPERMICRO-DIFFSERV-MIB;
|
|
|
|
fsmef MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO "support@Supermicro.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB is a proprietary MIB and defined to provide support for
|
|
MEF 6.1 and 10.2 specification view."
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
"For MEF 6.1 and 10.2"
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 71 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Textual conventions for MEF MIB
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
UniL2CPStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the action to be taken for the given
|
|
layer 2 control protocol service frames.
|
|
|
|
discard
|
|
The port must discard all ingress service frames
|
|
carrying the layer 2 control protocol service
|
|
frames.When this action is set at the port,
|
|
an EVC cannot process the layer 2 control protocol
|
|
service frames.
|
|
|
|
tunnel
|
|
The layer 2 control protocol service frames will be
|
|
Tunneled.
|
|
|
|
peer
|
|
The port must act as a peer, meaning it actively
|
|
participates with the Customer Equipment, in the
|
|
operation of the layer 2 control protocol service
|
|
frames. When this action is set at the port, an EVC
|
|
cannot process the layer 2 control protocol service frames."
|
|
|
|
SYNTAX INTEGER {
|
|
peer(1),
|
|
tunnel(2),
|
|
discard(3)
|
|
}
|
|
|
|
-- --------------------------------------------------------------------------
|
|
-- groups in the MIB
|
|
-- --------------------------------------------------------------------------
|
|
|
|
fsMefContext OBJECT IDENTIFIER ::= { fsmef 1 }
|
|
fsMefUni OBJECT IDENTIFIER ::= { fsmef 2 }
|
|
fsEvc OBJECT IDENTIFIER ::= { fsmef 3 }
|
|
fsMefETree OBJECT IDENTIFIER ::= { fsmef 4 }
|
|
fsUniCVlanEvc OBJECT IDENTIFIER ::= { fsmef 5 }
|
|
fsMefProfile OBJECT IDENTIFIER ::= { fsmef 6 }
|
|
fsMefPerformance OBJECT IDENTIFIER ::= { fsmef 7 }
|
|
-- --------------------------------------------------------------------------
|
|
-- MEF Scalar GROUP
|
|
-- --------------------------------------------------------------------------
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefContextTable START
|
|
-- -------------------------------------------------------------------------
|
|
|
|
fsMefContextTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefContextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains list of per virtual context MEF Module Parameters."
|
|
::= { fsMefContext 1 }
|
|
|
|
fsMefContextEntry OBJECT-TYPE
|
|
SYNTAX FsMefContextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains virtual context MEF module parameters."
|
|
INDEX { fsMefContextId }
|
|
::= { fsMefContextTable 1 }
|
|
|
|
FsMefContextEntry ::= SEQUENCE {
|
|
fsMefContextId Unsigned32,
|
|
fsMefContextName DisplayString,
|
|
fsMefTransmode INTEGER,
|
|
fsMefFrameLossBufferClear TruthValue,
|
|
fsMefFrameDelayBufferClear TruthValue,
|
|
fsMefFrameLossBufferSize Integer32,
|
|
fsMefFrameDelayBufferSize Integer32
|
|
}
|
|
|
|
fsMefContextId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the virtual context in the system "
|
|
::= { fsMefContextEntry 1 }
|
|
|
|
fsMefContextName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the virtual context"
|
|
::= { fsMefContextEntry 2 }
|
|
|
|
fsMefTransmode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1ad(1),
|
|
mplspw(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object defines under lying transport mode
|
|
dot1ad - Provider Bridge as transport mode
|
|
mplspw - MPLS cloud as transport mode"
|
|
|
|
DEFVAL { dot1ad }
|
|
::= { fsMefContextEntry 3 }
|
|
|
|
fsMefFrameLossBufferClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trigger to remove the contents of Buffer maintained for storing
|
|
frame-loss measured at various times.
|
|
|
|
Note: Get operation value should be ignored.
|
|
"
|
|
::= { fsMefContextEntry 4 }
|
|
|
|
fsMefFrameDelayBufferClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trigger to remove the contents of Buffer maintained for storing
|
|
frame-delay measured at various times.
|
|
|
|
Note: Get operation value should be ignored.
|
|
"
|
|
::= { fsMefContextEntry 5 }
|
|
|
|
fsMefFrameLossBufferSize OBJECT-TYPE
|
|
SYNTAX Integer32(1..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maximum number of entries for the Frame Loss Buffer.
|
|
"
|
|
DEFVAL { 1024 }
|
|
::= { fsMefContextEntry 6 }
|
|
|
|
fsMefFrameDelayBufferSize OBJECT-TYPE
|
|
SYNTAX Integer32(1..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maximum number of entries for the Frame Delay Buffer.
|
|
"
|
|
DEFVAL { 1024 }
|
|
::= { fsMefContextEntry 7 }
|
|
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefContextTable END
|
|
-- -------------------------------------------------------------------------
|
|
-- -----------------------------------------------------------------------------
|
|
-- MEF Table Group
|
|
-- -----------------------------------------------------------------------------
|
|
-- -----------------------------------------------------------------------------
|
|
-- fsUniTable START
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
fsUniTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains list of the UNIs configured on the system."
|
|
::= { fsMefUni 1 }
|
|
|
|
fsUniEntry OBJECT-TYPE
|
|
SYNTAX FsUniEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents UNI and its service attributes."
|
|
INDEX { ifIndex }
|
|
::= { fsUniTable 1 }
|
|
|
|
FsUniEntry ::= SEQUENCE {
|
|
fsUniId DisplayString,
|
|
fsUniPhysicalMedium IANAifType,
|
|
fsUniSpeed Gauge32,
|
|
fsUniMode INTEGER,
|
|
fsUniMacLayer SnmpAdminString,
|
|
fsUniMtu Integer32,
|
|
fsUniServiceMultiplexingBundling BITS,
|
|
fsUniCVlanId VlanId,
|
|
fsUniMaxEvcs Integer32,
|
|
fsUniL2CPDot1x UniL2CPStatus,
|
|
fsUniL2CPLacp UniL2CPStatus,
|
|
fsUniL2CPStp UniL2CPStatus,
|
|
fsUniL2CPGvrp UniL2CPStatus,
|
|
fsUniL2CPGmrp UniL2CPStatus,
|
|
fsUniL2CPMvrp UniL2CPStatus,
|
|
fsUniL2CPMmrp UniL2CPStatus,
|
|
fsUniL2CPLldp UniL2CPStatus,
|
|
fsUniL2CPElmi UniL2CPStatus,
|
|
fsUniRowStatus RowStatus
|
|
}
|
|
|
|
fsUniId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UNI Identifier is independent of the EVCs at the UNI.
|
|
It is assigned to the UNI by the Service Provider. It must
|
|
be a string and the string may have any value. The UNI
|
|
Identifier MUST be unique among all UNIs for the MEN.
|
|
|
|
If the UNI identifier value is not specified for the UNI or it
|
|
is unknown, the value of the fsUniId column is a
|
|
zero-length string."
|
|
|
|
::= { fsUniEntry 1}
|
|
|
|
fsUniPhysicalMedium OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It always return ethernetCsmacd (6)."
|
|
::= { fsUniEntry 2}
|
|
|
|
fsUniSpeed OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Speed is bits per second,It is dependent on the ethernet type.
|
|
The speed should be one of the give below.
|
|
- 10 Mbps
|
|
- 100 Mbps
|
|
- 10 or 100 Mbps Auto Negotiation
|
|
- 1 Gbps
|
|
- 10 Gbps."
|
|
::= { fsUniEntry 3}
|
|
|
|
fsUniMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fullDuplex (1),
|
|
halfDuplex (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mode defines the type of communication between the CE and UNI."
|
|
DEFVAL { fullDuplex }
|
|
::= { fsUniEntry 4}
|
|
|
|
fsUniMacLayer OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It should return IEEE 802.3 - 2005"
|
|
::= { fsUniEntry 5}
|
|
|
|
fsUniMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the largest packet which can be sent and received
|
|
on the interface, specified in octets.For interfaces that
|
|
are used for transmitting network datagrams, this is the
|
|
size of the largest network datagram that can be sent on the
|
|
interface.it should be greater than or equal to 1522"
|
|
::= { fsUniEntry 6}
|
|
|
|
fsUniServiceMultiplexingBundling OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
serviceMultiplexing(0),
|
|
bundling(1),
|
|
allToOneBundling(2)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the UNI service attributes.
|
|
|
|
service-Multiplexing :
|
|
This bit specifies whether the UNI supports multiple
|
|
EVCs. Point-to-Point EVCs and Multipoint-to-Multipoint
|
|
EVCs may be multiplexed in any combination at the UNI
|
|
if this bit is set to 1.
|
|
|
|
bundling :
|
|
This bit specifies whether the UNI has the bundling
|
|
attribute configured. If this bit is set to 1, more
|
|
than one CE-VLAN ID can map to a particular EVC at the
|
|
UNI.
|
|
|
|
allToOneBundling :
|
|
This bit specifies whether the UNI has the all to one
|
|
bundling attribute. If this bit is set to 1, all
|
|
CE-VLAN IDs map to a single EVC at the UNI.But if it is
|
|
set to 1 than serviceMultiplexing and bundling should be 0.
|
|
|
|
To summarize the valid combinations of serviceMultiplexing(0),
|
|
bundling(1) and allToOneBundling(2) bits for an UNI, consider
|
|
the following diagram:
|
|
|
|
VALID COMBINATIONS
|
|
-----------------------------------------------
|
|
|UNI ATTRIBUTES | 1 | 2 | 3 | 4 |
|
|
-----------------------------------------------
|
|
|Service | | | | |
|
|
|Multiplexing | Y | Y | | |
|
|
| | | | | |
|
|
-----------------------------------------------
|
|
| | | | | |
|
|
|Bundling | | Y | Y | |
|
|
| | | | | |
|
|
-----------------------------------------------
|
|
|All to One | | | | |
|
|
|Bundling | | | | Y |
|
|
| | | | | |
|
|
-----------------------------------------------
|
|
|
|
This object will take care of different service for example
|
|
if you set all-in-bundling bit to 1 than serviceMultiplexing and
|
|
bundling bits will set 0."
|
|
|
|
::= { fsUniEntry 7}
|
|
|
|
fsUniCVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 12-bit UNI CE-VID to be used for untagged frames received"
|
|
::= { fsUniEntry 8}
|
|
|
|
fsUniMaxEvcs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute defines the maximum number of EVCs that the UNI
|
|
can support. It MUST have a value of at least one."
|
|
DEFVAL {1}
|
|
::= { fsUniEntry 9}
|
|
|
|
fsUniL2CPDot1x OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the Dot1x packets received on this port."
|
|
::= { fsUniEntry 10}
|
|
|
|
fsUniL2CPLacp OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the LACP packets received on this port."
|
|
::= { fsUniEntry 11 }
|
|
|
|
fsUniL2CPStp OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the STP packets received on this port."
|
|
::= { fsUniEntry 12 }
|
|
|
|
fsUniL2CPGvrp OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the GVRP packets received on this port."
|
|
::= { fsUniEntry 13 }
|
|
|
|
fsUniL2CPGmrp OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the GMRP packets received on this port."
|
|
::= { fsUniEntry 14 }
|
|
|
|
fsUniL2CPMvrp OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the MVRP packets received on this port."
|
|
::= { fsUniEntry 15 }
|
|
|
|
fsUniL2CPMmrp OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the MMRP packets received on this port."
|
|
::= { fsUniEntry 16 }
|
|
|
|
fsUniL2CPLldp OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the LLDP packets received on this port."
|
|
::= { fsUniEntry 17 }
|
|
|
|
fsUniL2CPElmi OBJECT-TYPE
|
|
SYNTAX UniL2CPStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify whether to discard or peer or tunnel
|
|
the ELMI packets received on this port."
|
|
::= { fsUniEntry 18 }
|
|
|
|
fsUniRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for the UNI table."
|
|
::= { fsUniEntry 19 }
|
|
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- fsUniTable END
|
|
-- -----------------------------------------------------------------------------
|
|
-- -----------------------------------------------------------------------------
|
|
-- fsEvcTable START
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
fsEvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsEvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains list of the EVCs locally configured
|
|
on the system."
|
|
::= { fsEvc 1 }
|
|
|
|
fsEvcEntry OBJECT-TYPE
|
|
SYNTAX FsEvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents EVC and its attributes."
|
|
INDEX { fsEvcContextId, fsEvcIndex}
|
|
::= { fsEvcTable 1 }
|
|
|
|
FsEvcEntry ::= SEQUENCE {
|
|
fsEvcContextId Integer32,
|
|
fsEvcIndex VlanId,
|
|
fsEvcId DisplayString,
|
|
fsEvcType INTEGER,
|
|
fsEvcMaxUni Integer32,
|
|
fsEvcCVlanIdPreservation TruthValue,
|
|
fsEvcCVlanCoSPreservation TruthValue,
|
|
fsEvcRowStatus RowStatus
|
|
}
|
|
|
|
fsEvcContextId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the Virtual Bridge Context."
|
|
::= { fsEvcEntry 1 }
|
|
|
|
fsEvcIndex OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates service provider VLAN (S-VLAN) if value is
|
|
less than 4094. If the value is greater than 4094 this object
|
|
indicates VFI"
|
|
::= { fsEvcEntry 2 }
|
|
|
|
fsEvcId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary string, unique across the MEN, for the
|
|
EVC supporting the service instance."
|
|
::= { fsEvcEntry 3 }
|
|
|
|
fsEvcType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pointtoPoint(1),
|
|
multipointtoMultipoint(2),
|
|
rootedMultipoint(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are three type of EVC.
|
|
|
|
Point-to-Point :
|
|
In a Point-to-Point EVC (E-Line), exactly two UNIs must be associated
|
|
with one another.
|
|
|
|
Multipoint-to-Multipoint :
|
|
In a Multipoint-to-Multipoint EVC (E-LAN), two or more UNIs must be
|
|
associated with one another and all should be root node.
|
|
|
|
Rooted-Multipoint :
|
|
In a Rooted-Multipoint EVC (E-Tree), one or more of the UNIs must be
|
|
designated as a Root and each of the other UNIs MUST be
|
|
designated as a Leaf.A root can send packet to all other root
|
|
and leaf node but leaf node can send packet to only root node."
|
|
|
|
DEFVAL {pointtoPoint}
|
|
::= { fsEvcEntry 4 }
|
|
|
|
fsEvcMaxUni OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maximum Number of UNIs (MNU) service attribute specifies the
|
|
maximum number of UNIs allowed in the UNI List service attribute.
|
|
For a Point-to-Point EVC, MNU must be two. For a Multipoint EVC,
|
|
MNU must be two or greater."
|
|
DEFVAL {2}
|
|
::= { fsEvcEntry 5 }
|
|
|
|
fsEvcCVlanIdPreservation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An EVC attribute in which the CE-VLAN ID of an egress Service Frame
|
|
is identical to the CE-VLAN ID of the corresponding ingress
|
|
Service Frame. If set to true CE-VLAN ID should be preserved."
|
|
::= { fsEvcEntry 6 }
|
|
|
|
fsEvcCVlanCoSPreservation OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In an EVC with CE-VLAN CoS Preservation set (true),
|
|
an egress Service Frame resulting from an ingress Service Frame
|
|
that contains a CE-VLAN CoS must have the identical CE-VLAN CoS."
|
|
::= { fsEvcEntry 7 }
|
|
|
|
fsEvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for the UNI table."
|
|
::= { fsEvcEntry 8 }
|
|
-- -----------------------------------------------------------------------------
|
|
-- fsEvcTable END
|
|
-- -----------------------------------------------------------------------------
|
|
-- -----------------------------------------------------------------------------
|
|
-- fsEvcFilterTable START
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
fsEvcFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsEvcFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains list of the EVC's Unicast, Multicast frame
|
|
delivery conditions. Service Frame received on EVC can be Discarded,
|
|
Deliver Unconditionally or Deliver Conditionally. In case of deliver
|
|
conditionally all objects are mandatory in this table. In case of
|
|
Discard fsEvcFilterDestMacAddress object should not be configured.
|
|
In case of deliver unconditionally this table is optional"
|
|
::= { fsEvc 2 }
|
|
|
|
fsEvcFilterEntry OBJECT-TYPE
|
|
SYNTAX FsEvcFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents EVC's one of the frame delivery conditions."
|
|
INDEX { fsEvcContextId, fsEvcIndex, fsEvcFilterInstance}
|
|
::= { fsEvcFilterTable 1 }
|
|
|
|
FsEvcFilterEntry ::= SEQUENCE {
|
|
fsEvcFilterInstance Integer32,
|
|
fsEvcFilterDestMacAddress MacAddress,
|
|
fsEvcFilterAction INTEGER,
|
|
fsEvcFilterId Integer32,
|
|
fsEvcFilterRowStatus RowStatus
|
|
}
|
|
|
|
fsEvcFilterInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If multiple conditions are mapped to the same EVC, this index is
|
|
used to uniquely identify the individual row"
|
|
::= { fsEvcFilterEntry 1 }
|
|
|
|
fsEvcFilterDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC address to be matched with the service frame
|
|
Destination MAC address.In case if service frame delivery condition
|
|
is drop. This field is not mandatory. In case of service fame delivery
|
|
is conditional this object is mandatory."
|
|
::= { fsEvcFilterEntry 2 }
|
|
|
|
fsEvcFilterAction OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
allow (1),
|
|
drop (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the action to be taken on the service frame."
|
|
::= { fsEvcFilterEntry 3 }
|
|
|
|
fsEvcFilterId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the filter number. This filter id should be unique across the
|
|
EVCs and virtual contexts"
|
|
::= { fsEvcFilterEntry 4 }
|
|
|
|
fsEvcFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status for the EVC Filter table."
|
|
::= { fsEvcFilterEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- fsEvcFilterTable END
|
|
-- -----------------------------------------------------------------------------
|
|
-- -----------------------------------------------------------------------------
|
|
-- fsMefETreeTable START
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
fsMefETreeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefETreeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure the E-Tree feature."
|
|
::= { fsMefETree 1 }
|
|
|
|
fsMefETreeEntry OBJECT-TYPE
|
|
SYNTAX FsMefETreeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table gives a ingress port to egress port mapping."
|
|
INDEX {fsMefETreeIngresPort, fsMefETreeEvcIndex, fsMefETreeEgressPort}
|
|
::= { fsMefETreeTable 1 }
|
|
|
|
FsMefETreeEntry ::= SEQUENCE {
|
|
fsMefETreeIngresPort InterfaceIndex,
|
|
fsMefETreeEvcIndex Integer32,
|
|
fsMefETreeEgressPort InterfaceIndex,
|
|
fsMefETreeRowStatus RowStatus
|
|
}
|
|
|
|
fsMefETreeIngresPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the ingress port ifIndex."
|
|
::= { fsMefETreeEntry 1 }
|
|
|
|
fsMefETreeEvcIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the EVC on which E-Tree service to be
|
|
configured"
|
|
::= { fsMefETreeEntry 2 }
|
|
|
|
fsMefETreeEgressPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies one of the allowed egress ports for the given
|
|
ingress port identified by the first index for this row."
|
|
::= { fsMefETreeEntry 3 }
|
|
|
|
fsMefETreeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the Row Status for port E-Tree table entry.
|
|
Only 'CreateAndGo' and 'destroy' values are allowed for this
|
|
object. 'CreateAndWait' and 'notInService' values are not allowed.
|
|
|
|
Example:
|
|
To add ports 5, 6 ports are connecting the Leaf UNIs in
|
|
the E-Tree for root UNI connected to port 7. EVC index is 1
|
|
In this table, the following sequence to be followed:
|
|
1. Set the fsMefETreeRowStatus as 'CreateAndGo' for the
|
|
entry with index
|
|
(fsMefETreeIngresPort = 7, fsMefETreeEvcIndex = 1,
|
|
fsMefETreeEgressPort = 5)
|
|
2. Set the fsMefETreeRowStatus as 'CreateAndGo' for the
|
|
entry with index
|
|
(fsMefETreeIngresPort = 7, fsMefETreeEvcIndex = 1,
|
|
fsMefETreeEgressPort = 6)
|
|
3. Set the fsMefETreeRowStatus as 'CreateAndGo' for the
|
|
entry with index
|
|
(fsMefETreeIngresPort = 5, fsMefETreeEvcIndex = 1,
|
|
fsMefETreeEgressPort = 7)
|
|
4. Set the fsMefETreeRowStatus as 'CreateAndGo' for the
|
|
entry with index
|
|
(fsMefETreeIngresPort = 6, fsMefETreeEvcIndex = 1,
|
|
fsMefETreeEgressPort = 7)"
|
|
|
|
::= { fsMefETreeEntry 4 }
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- fsEvcL2CPTable END
|
|
-- ----------------------------------------------------------------------------
|
|
-- fsEvcCVlanMapTable START
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
fsUniCVlanEvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsUniCVlanEvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains list of the CE-VLAN ID UNI ID mapped with EVC."
|
|
::= { fsUniCVlanEvc 1 }
|
|
|
|
fsUniCVlanEvcEntry OBJECT-TYPE
|
|
SYNTAX FsUniCVlanEvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry represents UNI,CE-VLAN and EVC mapping."
|
|
INDEX { ifIndex,
|
|
fsUniCVlanEvcCVlanId }
|
|
::= { fsUniCVlanEvcTable 1 }
|
|
|
|
FsUniCVlanEvcEntry ::=
|
|
SEQUENCE {
|
|
fsUniCVlanEvcCVlanId VlanId,
|
|
fsUniCVlanEvcEvcIndex Integer32,
|
|
fsUniCVlanEvcRowStatus RowStatus
|
|
}
|
|
|
|
fsUniCVlanEvcCVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the CE-VLAN that needs to be mapped to the EVC"
|
|
::= {fsUniCVlanEvcEntry 1}
|
|
|
|
fsUniCVlanEvcEvcIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the EVC to which the CE-VLAN at the UNI to be
|
|
mapped"
|
|
::= {fsUniCVlanEvcEntry 2}
|
|
|
|
fsUniCVlanEvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the rowstatus of an entry in this table used to
|
|
map/unmap CE-VLAN to EVC at the UNI used to create and delete entries."
|
|
::= {fsUniCVlanEvcEntry 3}
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- fsEvcCVlanMapTable END
|
|
-- ----------------------------------------------------------------------------
|
|
fsMefFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A table to configure filter rule used by the classifier table."
|
|
::= { fsMefProfile 1 }
|
|
|
|
fsMefFilterEntry OBJECT-TYPE
|
|
SYNTAX FsMefFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Each entry in this table is a filter rule Index to the table
|
|
is filter number."
|
|
INDEX { fsMefFilterNo}
|
|
::= { fsMefFilterTable 1 }
|
|
|
|
FsMefFilterEntry ::=
|
|
SEQUENCE {
|
|
fsMefFilterNo Integer32,
|
|
fsMefFilterDscp Integer32,
|
|
fsMefFilterDirection INTEGER,
|
|
fsMefFilterEvc Integer32,
|
|
fsMefFilterCVlanPriority Integer32,
|
|
fsMefFilterIfIndex Integer32,
|
|
fsMefFilterStatus RowStatus
|
|
}
|
|
|
|
fsMefFilterNo OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filter rule number."
|
|
::= { fsMefFilterEntry 1 }
|
|
|
|
fsMefFilterDscp OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Dscp value to be checked against the packet. This object is
|
|
configured when CoS ID section is based on the DSCP.
|
|
A value of '-1' means, the DSCP Field becomes do not care."
|
|
DEFVAL { -1 }
|
|
::= { fsMefFilterEntry 2 }
|
|
|
|
fsMefFilterDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
in (1),
|
|
out(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the direction of this filter to be applied. By Default the
|
|
filter will be applied on ingress direction.
|
|
When the direction of this filter is 'in', It is applied on UNI ingress
|
|
traffic.
|
|
When the direction of this filter is 'out', It is applied on UNI egress
|
|
traffic"
|
|
DEFVAL { in }
|
|
::= { fsMefFilterEntry 3 }
|
|
|
|
fsMefFilterEvc OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the EVC for which the bandwidth profiles to
|
|
configured based. This also represents the CoS identifier selection
|
|
based on the EVC"
|
|
DEFVAL { 1 }
|
|
::= { fsMefFilterEntry 4 }
|
|
|
|
fsMefFilterCVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Customer Vlan Priority present in traffic.This object is
|
|
configured when CoS ID section is based on the priority code point
|
|
field of the CE-VLAN. A value of '-1' means the CE-VLAN PCP
|
|
becomes do not care."
|
|
DEFVAL { -1 }
|
|
::= { fsMefFilterEntry 5 }
|
|
|
|
fsMefFilterIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object represents the UNI on which the filter should be applied."
|
|
::= { fsMefFilterEntry 6 }
|
|
|
|
fsMefFilterStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
be deleted when this object is SET 'destroy'."
|
|
::= { fsMefFilterEntry 7 }
|
|
|
|
-- --------------------------------------------------------------------------
|
|
-- Mef ClassMap Table
|
|
-- --------------------------------------------------------------------------
|
|
fsMefClassMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefClassMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the Multifield Classifier details. It takes input
|
|
from the table fsMefFilterTable and outputs a CLASS for the
|
|
traffic-class pattern/match."
|
|
::= { fsMefProfile 2 }
|
|
|
|
fsMefClassMapEntry OBJECT-TYPE
|
|
SYNTAX FsMefClassMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Multi-field Classifier entry maps fsMefFilterTable to a CLASS"
|
|
INDEX { fsMefClassMapId }
|
|
::= { fsMefClassMapTable 1 }
|
|
|
|
FsMefClassMapEntry ::= SEQUENCE {
|
|
fsMefClassMapId IndexInteger,
|
|
fsMefClassMapName DisplayString,
|
|
fsMefClassMapFilterId Unsigned32,
|
|
fsMefClassMapCLASS Unsigned32,
|
|
fsMefClassMapStatus RowStatus
|
|
}
|
|
|
|
fsMefClassMapId OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that enumerates the MultiField Classifier table."
|
|
::= { fsMefClassMapEntry 1 }
|
|
|
|
fsMefClassMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name for the classmap Entry."
|
|
::= { fsMefClassMapEntry 2 }
|
|
|
|
fsMefClassMapFilterId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object specifies the index of the fsMefFilterTable, the details
|
|
of which should be matched against the incoming packet."
|
|
::= { fsMefClassMapEntry 3 }
|
|
|
|
fsMefClassMapCLASS OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the traffic CLASS to which an incoming frame pattern
|
|
is classified. The administrator needs to define the logical groups
|
|
that represent this CLASS. Multiple filter entries can
|
|
map to the same CLASS value. '0' is not configurable but it is the
|
|
default value."
|
|
DEFVAL { 0 }
|
|
::= { fsMefClassMapEntry 4 }
|
|
|
|
fsMefClassMapStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row. All writable objects in this
|
|
row may be modified only when the row status is not active.
|
|
CreateAndGo not allowed ,it can be deleted 'destroy',
|
|
only if it is not referenced
|
|
by other table; otherwise return inconsistentValue error."
|
|
::= { fsMefClassMapEntry 5 }
|
|
|
|
-- --------------------------------------------------------------------------
|
|
-- ClassTable
|
|
-- --------------------------------------------------------------------------
|
|
fsMefClassTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table assigns is provided for easy mapping of CLASS policymap
|
|
and class map tables."
|
|
::= { fsMefProfile 3 }
|
|
|
|
fsMefClassEntry OBJECT-TYPE
|
|
SYNTAX FsMefClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry specifies CLASS used to map policymap and class map tables."
|
|
INDEX { fsMefClassCLASS }
|
|
::= { fsMefClassTable 1 }
|
|
|
|
FsMefClassEntry ::= SEQUENCE {
|
|
fsMefClassCLASS IndexInteger,
|
|
fsMefClassStatus RowStatus
|
|
}
|
|
|
|
fsMefClassCLASS OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the Traffic CLASS to which an incoming frame pattern
|
|
is classified. The administrator needs to define the traffic
|
|
class patterns that represent this CLASS. Multiple
|
|
filter entries can map to the same CLASS value."
|
|
::= { fsMefClassEntry 1 }
|
|
|
|
fsMefClassStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row. All writable objects in this
|
|
row may be modified only when the row status is not active.
|
|
it can be deleted 'destroy', only if it is not referenced
|
|
by other table; otherwise return inconsistentValue error."
|
|
::= { fsMefClassEntry 2 }
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- Meter Table
|
|
-- ------------------------------------------------------------------
|
|
fsMefMeterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefMeterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table enumerates specific meters that a system may use to
|
|
police a stream of traffic. This may include all traffic on an
|
|
interface."
|
|
::= { fsMefProfile 4 }
|
|
|
|
fsMefMeterEntry OBJECT-TYPE
|
|
SYNTAX FsMefMeterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the meter table describes a single conformance level
|
|
of a meter."
|
|
INDEX { fsMefMeterId }
|
|
::= { fsMefMeterTable 1 }
|
|
|
|
FsMefMeterEntry ::= SEQUENCE {
|
|
fsMefMeterId IndexInteger,
|
|
fsMefMeterName DisplayString,
|
|
fsMefMeterType Unsigned32,
|
|
fsMefMeterColorMode Unsigned32,
|
|
fsMefMeterCIR Unsigned32,
|
|
fsMefMeterCBS Unsigned32,
|
|
fsMefMeterEIR Unsigned32,
|
|
fsMefMeterEBS Unsigned32,
|
|
fsMefMeterStatus RowStatus
|
|
}
|
|
|
|
fsMefMeterId OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that enumerates the Meter entries."
|
|
::= { fsMefMeterEntry 1 }
|
|
|
|
fsMefMeterName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Name for the meter entry.
|
|
It should be unique in this Table."
|
|
::= { fsMefMeterEntry 2 }
|
|
|
|
fsMefMeterType OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metering algorithm associated with the Token Bucket meter.
|
|
It supports only mefDecoupledMeter(6), mefCoupledMeter(7) types."
|
|
::= { fsMefMeterEntry 3 }
|
|
|
|
fsMefMeterColorMode OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The user defined Meter Color Mode."
|
|
DEFVAL { colorBlind }
|
|
::= { fsMefMeterEntry 4 }
|
|
|
|
fsMefMeterCIR OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..10485760)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The committed information rate as per MEF.
|
|
Must be >= 0. CIR must be less than or equal to EIR, if EIR > 0"
|
|
::= { fsMefMeterEntry 5 }
|
|
|
|
fsMefMeterCBS OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..10485760)
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The committed burst size as per MEF. Must be > 0 if CIR > 0.
|
|
Maximum allowable size will be jumbo frame size."
|
|
::= { fsMefMeterEntry 6 }
|
|
|
|
fsMefMeterEIR OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..10485760)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The excess information rate as per MEF.
|
|
Must be >= 0. EIR must be greater than or equal to CIR, if EIR > 0."
|
|
::= { fsMefMeterEntry 7 }
|
|
|
|
fsMefMeterEBS OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..10485760)
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The excess burst size as per MEF. Must be > 0 if EIR > 0."
|
|
::= { fsMefMeterEntry 8 }
|
|
|
|
fsMefMeterStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row. All writable objects in this
|
|
row may be modified only of the Entry is not ACTIVE.
|
|
It can be deleted 'destroy', only if it is not referenced
|
|
by other table; otherwise return inconsistentValue error."
|
|
::= { fsMefMeterEntry 9 }
|
|
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- Policy-Map Table ( ClassMap To PolicyMap Table )
|
|
-- ------------------------------------------------------------------
|
|
|
|
fsMefPolicyMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefPolicyMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table contains the class-map to policy-map mapping
|
|
details."
|
|
::= { fsMefProfile 5 }
|
|
|
|
fsMefPolicyMapEntry OBJECT-TYPE
|
|
SYNTAX FsMefPolicyMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry to map a policy for a class-map."
|
|
INDEX { fsMefPolicyMapId }
|
|
::= { fsMefPolicyMapTable 1 }
|
|
|
|
|
|
FsMefPolicyMapEntry ::= SEQUENCE {
|
|
fsMefPolicyMapId IndexInteger,
|
|
fsMefPolicyMapName DisplayString,
|
|
fsMefPolicyMapCLASS Unsigned32,
|
|
fsMefPolicyMapMeterTableId Unsigned32, -- meter
|
|
fsMefPolicyMapStatus RowStatus
|
|
}
|
|
|
|
fsMefPolicyMapId OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An index that enumerates the policy-map table entries."
|
|
::= { fsMefPolicyMapEntry 1 }
|
|
|
|
fsMefPolicyMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This the Name for a policy entry. It should be unique in this Table."
|
|
::= { fsMefPolicyMapEntry 2 }
|
|
|
|
fsMefPolicyMapCLASS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Traffic CLASS for which the policy-map
|
|
needs to be applied. A valid value is not necessary for
|
|
creation of an entry in this table. When this object is configured as
|
|
dont-care(0), it is mandatory that the PolicyMapIfIndex is
|
|
configured. This implies that the policy is interface-specific
|
|
and not CLASS-specific."
|
|
DEFVAL { 0 }
|
|
::= { fsMefPolicyMapEntry 3 }
|
|
|
|
fsMefPolicyMapMeterTableId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Object refers to a Meter table Id which is the index
|
|
for the Meter table. A Valid value of this object is
|
|
not mandatory for the creation of an entry in this table."
|
|
DEFVAL { 0 }
|
|
::= { fsMefPolicyMapEntry 4 }
|
|
|
|
fsMefPolicyMapStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row."
|
|
::= { fsMefPolicyMapEntry 5 }
|
|
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefMepTable START
|
|
-- -------------------------------------------------------------------------
|
|
|
|
fsMefMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Entity Group End Point (MEP) table. The indexs of the
|
|
Table fsMefContextId, fsMefMegIndex, fsMefMeIndex, fsMefMepIdentifier
|
|
points to the fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex,
|
|
fsMIY1731MepIdentifier. Entries in the table will not be created
|
|
by configuring this table. These entities have to be created explicitly
|
|
in ECFM module.
|
|
"
|
|
::= { fsMefPerformance 1 }
|
|
|
|
fsMefMepEntry OBJECT-TYPE
|
|
SYNTAX FsMefMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP table entry"
|
|
INDEX { fsMefContextId,
|
|
fsMefMegIndex,
|
|
fsMefMeIndex,
|
|
fsMefMepIdentifier
|
|
}
|
|
::= { fsMefMepTable 1 }
|
|
FsMefMepEntry ::= SEQUENCE {
|
|
fsMefMegIndex Unsigned32,
|
|
fsMefMeIndex Unsigned32,
|
|
fsMefMepIdentifier Dot1agCfmMepId,
|
|
fsMefMepTransmitLmmStatus FsY1731TransmitStatus,
|
|
fsMefMepTransmitLmmResultOK TruthValue,
|
|
fsMefMepTransmitLmmInterval FsY1731LmmInterval,
|
|
fsMefMepTransmitLmmDeadline Unsigned32,
|
|
fsMefMepTransmitLmmDropEnable TruthValue,
|
|
fsMefMepTransmitLmmPriority Integer32,
|
|
fsMefMepTransmitLmmDestMacAddress MacAddress,
|
|
fsMefMepTransmitLmmDestMepId Dot1agCfmMepIdOrZero,
|
|
fsMefMepTransmitLmmDestIsMepId TruthValue,
|
|
fsMefMepTransmitLmmMessages Integer32,
|
|
fsMefMepTxFCf Unsigned32,
|
|
fsMefMepRxFCb Unsigned32,
|
|
fsMefMepTxFCb Unsigned32,
|
|
fsMefMepNearEndFrameLossThreshold Unsigned32,
|
|
fsMefMepFarEndFrameLossThreshold Unsigned32,
|
|
fsMefMepTransmitDmStatus FsY1731TransmitStatus,
|
|
fsMefMepTransmitDmResultOK TruthValue,
|
|
fsMefMepTransmitDmType INTEGER,
|
|
fsMefMepTransmitDmInterval TimeInterval,
|
|
fsMefMepTransmitDmMessages Integer32,
|
|
fsMefMepTransmitDmmDropEnable TruthValue,
|
|
fsMefMepTransmit1DmDropEnable TruthValue,
|
|
fsMefMepTransmitDmmPriority Integer32,
|
|
fsMefMepTransmit1DmPriority Integer32,
|
|
fsMefMepTransmitDmDestMacAddress MacAddress,
|
|
fsMefMepTransmitDmDestMepId Dot1agCfmMepIdOrZero,
|
|
fsMefMepTransmitDmDestIsMepId TruthValue,
|
|
fsMefMepTransmitDmDeadline Unsigned32,
|
|
fsMefMepDmrOptionalFields TruthValue,
|
|
fsMefMep1DmRecvCapability INTEGER,
|
|
fsMefMepFrameDelayThreshold Unsigned32,
|
|
fsMefMepRowStatus RowStatus,
|
|
fsMefMepRxFCf Unsigned32,
|
|
fsMefMep1DmTransInterval TimeInterval
|
|
}
|
|
|
|
fsMefMegIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internally this object will refer to mib object dot1agCfmMdIndex of
|
|
ECFM and fsMIY1731MegIndex of Y1731."
|
|
|
|
::= { fsMefMepEntry 1 }
|
|
|
|
fsMefMeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internally this object will refer to mib object
|
|
dot1agCfmMaIndex of ECFM and fsMIY1731MeIndex of Y1731"
|
|
::= { fsMefMepEntry 2 }
|
|
|
|
fsMefMepIdentifier OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internally this object will refer to mib object
|
|
dot1agCfmMepIdentifier of ECFM and fsMIY1731MepIdentifier of Y1731"
|
|
::= { fsMefMepEntry 3 }
|
|
|
|
fsMefMepTransmitLmmStatus OBJECT-TYPE
|
|
SYNTAX FsY1731TransmitStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Enumerated value set to 'start' to initiate LM transmission
|
|
and 'stop' to stop LM transmission.
|
|
'ready' and 'notReady' indicates whether LM can be initiated or not.
|
|
|
|
Note: User can not set to 'ready' or 'notReady'.
|
|
"
|
|
DEFVAL { ready }
|
|
::= { fsMefMepEntry 4 }
|
|
|
|
fsMefMepTransmitLmmResultOK OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true The Loss measurement Message (LMM) will be (or has been) sent.
|
|
|
|
- false The Loss measurement Message (LMM) will not be sent.
|
|
"
|
|
DEFVAL { true }
|
|
::= { fsMefMepEntry 5 }
|
|
|
|
fsMefMepTransmitLmmInterval OBJECT-TYPE
|
|
SYNTAX FsY1731LmmInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between two successive LMM transmissions to be used by the MEP.
|
|
"
|
|
DEFVAL { interval100ms }
|
|
::= { fsMefMepEntry 6 }
|
|
|
|
fsMefMepTransmitLmmDeadline OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..172800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify a timeout, in seconds, before loss measurement exits.
|
|
Loss Measurement exits, if configured number of messages are sent
|
|
before timeout.
|
|
"
|
|
::= { fsMefMepEntry 7 }
|
|
|
|
fsMefMepTransmitLmmDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Enable bit value to be used in the VLAN tag, if present
|
|
in the transmitted LMM frame.
|
|
"
|
|
DEFVAL { false }
|
|
::= { fsMefMepEntry 8 }
|
|
|
|
fsMefMepTransmitLmmPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present
|
|
in the transmitted LMM frame.
|
|
"
|
|
DEFVAL { 7 }
|
|
::= { fsMefMepEntry 9 }
|
|
|
|
fsMefMepTransmitLmmDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast
|
|
destination MAC address to be used for LMM.
|
|
"
|
|
::= { fsMefMepEntry 10 }
|
|
|
|
fsMefMepTransmitLmmDestMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the Target MAC Address Field to be
|
|
transmitted:
|
|
The Maintenance association End Point Identifier of
|
|
another MEP in the same Maintenance Association
|
|
This address will be used if the value of the column
|
|
fsMefMepTransmitLmmDestIsMepId is 'true'.
|
|
"
|
|
::= { fsMefMepEntry 11 }
|
|
|
|
fsMefMepTransmitLmmDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for
|
|
LM frame transmission.
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for Frame Loss Measurement transmission.
|
|
"
|
|
::= { fsMefMepEntry 12 }
|
|
|
|
fsMefMepTransmitLmmMessages OBJECT-TYPE
|
|
SYNTAX Integer32(1..8192)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LMM messages to be transmitted.
|
|
"
|
|
::= { fsMefMepEntry 13 }
|
|
|
|
fsMefMepTxFCf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter of in-profile data frames transmitted towards its
|
|
peer MEP transmitted in the last CCM or LMM.
|
|
"
|
|
::= { fsMefMepEntry 14 }
|
|
|
|
fsMefMepRxFCb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter of in-profile data frames received from its peer MEP at the
|
|
time of receiving the last CCM frame.
|
|
"
|
|
::= { fsMefMepEntry 15 }
|
|
|
|
fsMefMepTxFCb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of fsMefMepTxFCf field in the last CCM or LMR frame
|
|
received from its peer MEP.
|
|
"
|
|
::= { fsMefMepEntry 16 }
|
|
|
|
fsMefMepNearEndFrameLossThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Threshold value for the near-end frame loss.
|
|
Notification is sent to Management Application if calculated near-end
|
|
frame loss exceeds configured threshold.
|
|
"
|
|
::= { fsMefMepEntry 17 }
|
|
|
|
fsMefMepFarEndFrameLossThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Threshold value for the far-end frame loss.
|
|
Notification is sent to Management Application if calculated far-end
|
|
frame loss exceeds configured threshold.
|
|
This refers to Oneway Frame Loss ratio objective mentioned in section
|
|
6.9.6 of standard 10.2.
|
|
"
|
|
::= { fsMefMepEntry 18 }
|
|
|
|
fsMefMepTransmitDmStatus OBJECT-TYPE
|
|
SYNTAX FsY1731TransmitStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Enumerated value set to 'start' to initiate 1DM or DMM transmission
|
|
and 'stop' to stop 1DM or DMM transmission.
|
|
'ready' and 'notReady' indicates whether 1DM or DMM can be initiated
|
|
or not.
|
|
|
|
Note: User can not set to 'ready' or 'notReady'.
|
|
"
|
|
DEFVAL { ready }
|
|
::= { fsMefMepEntry 19 }
|
|
|
|
fsMefMepTransmitDmResultOK OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true The Delay measurement Message (1DM or DMM) will be
|
|
(or has been) sent.
|
|
- false The Delay measurement Message (1DM or DMM) will not be sent.
|
|
"
|
|
DEFVAL { true }
|
|
::= { fsMefMepEntry 20 }
|
|
|
|
fsMefMepTransmitDmType OBJECT-TYPE
|
|
SYNTAX INTEGER { oneWay(1), twoWay(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of delay measurement to be initiated:
|
|
|
|
- oneWay(1) Measurement (by 1DM) is calculated at destination end.
|
|
- twoWay(2) Measurement (by DMM-DMR) is calculated at initiation end.
|
|
"
|
|
DEFVAL { 2 }
|
|
::= { fsMefMepEntry 21 }
|
|
|
|
fsMefMepTransmitDmInterval OBJECT-TYPE
|
|
SYNTAX TimeInterval(1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between two successive DM messages
|
|
(1DM or DMM) transmissions to be used by the MEP. This refers
|
|
to the interval between frame pairs as mentioned in section 6.9.4
|
|
of MEF 10.2 standard.
|
|
"
|
|
DEFVAL { 100 }
|
|
::= { fsMefMepEntry 22 }
|
|
|
|
fsMefMepTransmitDmMessages OBJECT-TYPE
|
|
SYNTAX Integer32(1..8192)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DM (1DM or DMM) messages to be transmitted.
|
|
"
|
|
::= { fsMefMepEntry 23 }
|
|
|
|
fsMefMepTransmitDmmDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Enable bit value to be used in the VLAN tag, if present
|
|
in the transmitted DMM frame.
|
|
"
|
|
DEFVAL { false }
|
|
::= { fsMefMepEntry 24 }
|
|
|
|
fsMefMepTransmit1DmDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Enable bit value to be used in the VLAN tag, if present
|
|
in the transmitted 1DM frame.
|
|
"
|
|
DEFVAL { false }
|
|
::= { fsMefMepEntry 25 }
|
|
|
|
fsMefMepTransmitDmmPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present
|
|
in the transmitted DMM frame.
|
|
"
|
|
DEFVAL { 7 }
|
|
::= { fsMefMepEntry 26 }
|
|
|
|
fsMefMepTransmit1DmPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present
|
|
in the transmitted 1DM frame.
|
|
"
|
|
DEFVAL { 7 }
|
|
::= { fsMefMepEntry 27 }
|
|
|
|
fsMefMepTransmitDmDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast
|
|
destination MAC address to be used for 1DM or DMM.
|
|
"
|
|
::= { fsMefMepEntry 28 }
|
|
|
|
fsMefMepTransmitDmDestMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the Target MAC Address Field to be
|
|
transmitted:
|
|
The Maintenance association End Point Identifier of
|
|
another MEP in the same Maintenance Association
|
|
This address will be used if the value of the column
|
|
fsMefMepTransmitDmDestIsMepId is 'true'.
|
|
"
|
|
::= { fsMefMepEntry 29 }
|
|
|
|
fsMefMepTransmitDmDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for
|
|
Delay frame transmission.
|
|
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for Delay frame transmission.
|
|
"
|
|
::= { fsMefMepEntry 30 }
|
|
|
|
fsMefMepTransmitDmDeadline OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..172800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify a timeout, in seconds, before Delay Measurement operation exits.
|
|
Delay Measurement operation exits, if configured number of messages are
|
|
sent before timeout.
|
|
"
|
|
::= { fsMefMepEntry 31 }
|
|
|
|
fsMefMepDmrOptionalFields OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether to include optional fields in the DMR Frame or not.
|
|
True indicates optional fields are to be included and False indicates
|
|
optional fields are not included.
|
|
|
|
Optional fields are included to include the processing time at peer MEP.
|
|
"
|
|
DEFVAL { false }
|
|
::= { fsMefMepEntry 32 }
|
|
|
|
fsMefMep1DmRecvCapability OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status of 1DM Frame reception. This enables
|
|
or disables the capability of MEP to process the 1DM Frames.
|
|
A value of 'enabled' (1) indicates to accept and process 1DM Frames.
|
|
A value of 'disabled' (2) indicates not to process the 1DM Frames.
|
|
"
|
|
DEFVAL { enabled }
|
|
::= { fsMefMepEntry 33 }
|
|
|
|
fsMefMepFrameDelayThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Threshold (in microseconds) for the Frame delay.
|
|
Notification is sent to Management application if calculated frame delay
|
|
exceeds configured threshold. This refers to Inter Frame Delay Variation
|
|
Performance Objective mentioned in section 6.9.4 of standard 10.2.
|
|
"
|
|
DEFVAL { 200 }
|
|
::= { fsMefMepEntry 34 }
|
|
|
|
fsMefMepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of MEP row.
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated, possible values are row status active and
|
|
row status not active.
|
|
"
|
|
::= { fsMefMepEntry 35 }
|
|
|
|
fsMefMepRxFCf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of fsMefMepRxFCf field is the value of in-profile data frames
|
|
received from its peer MEP.
|
|
"
|
|
::= { fsMefMepEntry 36 }
|
|
|
|
fsMefMep1DmTransInterval OBJECT-TYPE
|
|
SYNTAX TimeInterval(0..1500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval (in 0.01 seconds) between two successive One-way
|
|
DM Transactions and is used to carry out Delay Variation Measurement for
|
|
1DM transactions. The value '0' indicates One-way Delay Variation
|
|
measurement cannot take place. The value should be greater than the
|
|
DM Interval.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { fsMefMepEntry 37 }
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefMepTable END
|
|
-- -------------------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefFdTable START
|
|
-- -------------------------------------------------------------------------
|
|
|
|
fsMefFdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefFdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends the MEP table and contains a list of
|
|
information about the Frame Delay measured at various times by a
|
|
MEP.
|
|
Size of this table is defined by the object
|
|
fsMefFrameDelayBufferSize. If the addition of a frame delay entry
|
|
would exceed the resources allocated to table, then the oldest entries
|
|
in the table are deleted until sufficient resources are available to
|
|
hold the new frame delay entry.
|
|
|
|
Delay Measured can be of one-way or two-way.
|
|
|
|
"
|
|
::= { fsMefPerformance 2 }
|
|
|
|
fsMefFdEntry OBJECT-TYPE
|
|
SYNTAX FsMefFdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Frame delay buffer table entry."
|
|
INDEX { fsMefContextId,
|
|
fsMefMegIndex,
|
|
fsMefMeIndex,
|
|
fsMefMepIdentifier,
|
|
fsMefFdTransId,
|
|
fsMefFdSeqNumber
|
|
}
|
|
::= { fsMefFdTable 1 }
|
|
|
|
FsMefFdEntry ::= SEQUENCE {
|
|
fsMefFdTransId Unsigned32,
|
|
fsMefFdSeqNumber Unsigned32,
|
|
fsMefFdTxTimeStampf FsY1731TimeRepresentation,
|
|
fsMefFdMeasurementTimeStamp TimeStamp,
|
|
fsMefFdPeerMepMacAddress MacAddress,
|
|
fsMefFdIfIndex InterfaceIndex,
|
|
fsMefFdDelayValue FsY1731TimeRepresentation,
|
|
fsMefFdIFDV FsY1731TimeRepresentation,
|
|
fsMefFdFDV FsY1731TimeRepresentation,
|
|
fsMefFdMeasurementType INTEGER
|
|
}
|
|
|
|
fsMefFdTransId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a delay measurement transaction.
|
|
"
|
|
::= { fsMefFdEntry 1 }
|
|
|
|
fsMefFdSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Locally maintained sequence number of FD Entries"
|
|
::= { fsMefFdEntry 2}
|
|
|
|
fsMefFdTxTimeStampf OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TxTimeStampf value sent in a Delay measurement message (DMM).
|
|
or received in 1DM frame.
|
|
"
|
|
::= { fsMefFdEntry 3 }
|
|
|
|
fsMefFdMeasurementTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time at which measurement takes place.
|
|
"
|
|
::= { fsMefFdEntry 4}
|
|
|
|
fsMefFdPeerMepMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the Mac Address of the peer MEP to which DM message(s)
|
|
is sent.
|
|
"
|
|
::= { fsMefFdEntry 5 }
|
|
|
|
fsMefFdIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the interface index of the interface either a
|
|
bridge port, or an aggregated IEEE 802.1 link within a bridge port,
|
|
to which the MEP at which measurement takes place is attached.
|
|
"
|
|
::= { fsMefFdEntry 6 }
|
|
|
|
fsMefFdDelayValue OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the measured frame delay value. This refers
|
|
to One way Frame Delay mentioned in section 6.9.2 of MEF 10.2
|
|
standard.
|
|
"
|
|
::= { fsMefFdEntry 7 }
|
|
|
|
fsMefFdIFDV OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inter frame delay variation, (IFDV), calculated with respect to
|
|
current transaction. This refers
|
|
to Inter Frame Delay variation mentioned in section 6.9.4 of MEF 10.2
|
|
standard.
|
|
"
|
|
::= { fsMefFdEntry 8 }
|
|
|
|
fsMefFdFDV OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame delay variation, (IFDV), calculated with respect to current
|
|
transaction.
|
|
"
|
|
::= { fsMefFdEntry 9 }
|
|
|
|
fsMefFdMeasurementType OBJECT-TYPE
|
|
SYNTAX INTEGER { oneWay(1), twoWay(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the frame-delay measurement (oneWay or twoWay).
|
|
"
|
|
::= { fsMefFdEntry 10 }
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefFdTable END
|
|
-- -------------------------------------------------------------------------
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefFdStatsTable END
|
|
-- -------------------------------------------------------------------------
|
|
|
|
fsMefFdStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefFdStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends the MEP table and contains output of one-way and
|
|
two-way delay measurement transaction.
|
|
"
|
|
::= { fsMefPerformance 3 }
|
|
|
|
fsMefFdStatsEntry OBJECT-TYPE
|
|
SYNTAX FsMefFdStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Delay Statistics table entry."
|
|
INDEX { fsMefContextId,
|
|
fsMefMegIndex,
|
|
fsMefMeIndex,
|
|
fsMefMepIdentifier,
|
|
fsMefFdTransId
|
|
}
|
|
::= { fsMefFdStatsTable 1 }
|
|
|
|
FsMefFdStatsEntry ::= SEQUENCE {
|
|
fsMefFdStatsTimeStamp TimeStamp,
|
|
fsMefFdStatsDmmOut Unsigned32,
|
|
fsMefFdStatsDmrIn Unsigned32,
|
|
fsMefFdStatsDelayAverage FsY1731TimeRepresentation,
|
|
fsMefFdStatsFDVAverage FsY1731TimeRepresentation,
|
|
fsMefFdStatsIFDVAverage FsY1731TimeRepresentation,
|
|
fsMefFdStatsDelayMin FsY1731TimeRepresentation,
|
|
fsMefFdStatsDelayMax FsY1731TimeRepresentation
|
|
}
|
|
|
|
fsMefFdStatsTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time stamp at which one-way or two-way delay measurement (DMM) is
|
|
initiated.
|
|
"
|
|
::= { fsMefFdStatsEntry 1 }
|
|
|
|
fsMefFdStatsDmmOut OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of DMMs sent for a two-way delay measurement
|
|
transaction.
|
|
"
|
|
::= { fsMefFdStatsEntry 2 }
|
|
|
|
fsMefFdStatsDmrIn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of requests received for a one-way or responses received for
|
|
two-way delay measurement transaction.
|
|
"
|
|
::= { fsMefFdStatsEntry 3 }
|
|
|
|
fsMefFdStatsDelayAverage OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average delay measured for a one-way or two-way delay measurement
|
|
transaction. This refers to one way mean delay of section 6.9.2 of
|
|
MEF 10.2
|
|
"
|
|
::= { fsMefFdStatsEntry 4 }
|
|
|
|
fsMefFdStatsFDVAverage OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Delay Variation (FDV) average calculated for a
|
|
delay measurement transaction.
|
|
"
|
|
::= { fsMefFdStatsEntry 5 }
|
|
|
|
fsMefFdStatsIFDVAverage OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inter Frame Delay Variation (IFDV) average calculated for
|
|
delay measurement transaction.
|
|
"
|
|
::= { fsMefFdStatsEntry 6 }
|
|
|
|
fsMefFdStatsDelayMin OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the minimum value of frame-delay.
|
|
"
|
|
::= { fsMefFdStatsEntry 7 }
|
|
|
|
fsMefFdStatsDelayMax OBJECT-TYPE
|
|
SYNTAX FsY1731TimeRepresentation
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the maximum value of frame-delay.
|
|
"
|
|
::= { fsMefFdStatsEntry 8 }
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefFdStatsTable END
|
|
-- -------------------------------------------------------------------------
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefFlTable START
|
|
-- -------------------------------------------------------------------------
|
|
|
|
fsMefFlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefFlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends the MEP table and contains a information about
|
|
the Frame-loss measured at various times by a MEP.
|
|
|
|
Size of this table is defined by the object
|
|
fsMefFrameLossBufferSize. If the addition of a frame loss entry
|
|
would exceed the resources allocated to table, then the oldest entries
|
|
in the table are deleted until sufficient resources are available to
|
|
hold the new frame loss entry.
|
|
"
|
|
::= { fsMefPerformance 4 }
|
|
|
|
fsMefFlEntry OBJECT-TYPE
|
|
SYNTAX FsMefFlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Frame Loss Statistics table entry."
|
|
INDEX { fsMefContextId,
|
|
fsMefMegIndex,
|
|
fsMefMeIndex,
|
|
fsMefMepIdentifier,
|
|
fsMefFlTransId,
|
|
fsMefFlSeqNumber
|
|
}
|
|
::= { fsMefFlTable 1 }
|
|
|
|
FsMefFlEntry ::= SEQUENCE {
|
|
fsMefFlTransId Unsigned32,
|
|
fsMefFlSeqNumber Unsigned32,
|
|
fsMefFlMeasurementTimeStamp TimeStamp,
|
|
fsMefFlPeerMepMacAddress MacAddress,
|
|
fsMefFlIfIndex InterfaceIndex,
|
|
fsMefFlFarEndLoss Unsigned32,
|
|
fsMefFlNearEndLoss Unsigned32,
|
|
fsMefFlMeasurementTime TimeInterval
|
|
}
|
|
|
|
fsMefFlTransId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a loss measurement transaction.
|
|
"
|
|
::= { fsMefFlEntry 1 }
|
|
|
|
fsMefFlSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Locally maintained sequence number of Frame Loss Entries"
|
|
::= { fsMefFlEntry 2 }
|
|
|
|
fsMefFlMeasurementTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time at which frame-loss is actually measured.
|
|
"
|
|
::= { fsMefFlEntry 3 }
|
|
|
|
fsMefFlPeerMepMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the Mac Address of the peer MEP to which loss measurement
|
|
message(s) is sent.
|
|
"
|
|
::= { fsMefFlEntry 4 }
|
|
|
|
fsMefFlIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the interface index of the interface either a
|
|
bridge port, or an aggregated IEEE 802.1 link within a bridge port,
|
|
to which the MEP at which measurement takes place is attached.
|
|
"
|
|
::= { fsMefFlEntry 5 }
|
|
|
|
fsMefFlFarEndLoss OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the far-end frame-loss value.
|
|
"
|
|
::= { fsMefFlEntry 6 }
|
|
|
|
fsMefFlNearEndLoss OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the near-end frame-loss value.
|
|
"
|
|
::= { fsMefFlEntry 7 }
|
|
|
|
fsMefFlMeasurementTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time taken to measure frame-loss.
|
|
"
|
|
::= { fsMefFlEntry 8 }
|
|
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefFlTable END
|
|
-- -------------------------------------------------------------------------
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefFlStatsTable START
|
|
-- -------------------------------------------------------------------------
|
|
|
|
fsMefFlStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefFlStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends the MEP table and contains output of
|
|
frame-loss measurement transaction.
|
|
"
|
|
::= { fsMefPerformance 5 }
|
|
|
|
fsMefFlStatsEntry OBJECT-TYPE
|
|
SYNTAX FsMefFlStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Frame Loss Statistics table entry."
|
|
INDEX { fsMefContextId,
|
|
fsMefMegIndex,
|
|
fsMefMeIndex,
|
|
fsMefMepIdentifier,
|
|
fsMefFlTransId
|
|
}
|
|
::= { fsMefFlStatsTable 1 }
|
|
|
|
FsMefFlStatsEntry ::= SEQUENCE {
|
|
fsMefFlStatsTimeStamp TimeStamp,
|
|
fsMefFlStatsMessagesOut Unsigned32,
|
|
fsMefFlStatsMessagesIn Unsigned32,
|
|
fsMefFlStatsFarEndLossAverage Unsigned32,
|
|
fsMefFlStatsNearEndLossAverage Unsigned32,
|
|
fsMefFlStatsMeasurementType INTEGER,
|
|
fsMefFlStatsFarEndLossMin Unsigned32,
|
|
fsMefFlStatsFarEndLossMax Unsigned32,
|
|
fsMefFlStatsNearEndLossMin Unsigned32,
|
|
fsMefFlStatsNearEndLossMax Unsigned32
|
|
}
|
|
|
|
fsMefFlStatsTimeStamp OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time stamp at which frame-loss measurement transaction is initiated.
|
|
"
|
|
::= { fsMefFlStatsEntry 1 }
|
|
|
|
fsMefFlStatsMessagesOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of frames with ETH-LM information sent for a transaction.
|
|
"
|
|
::= { fsMefFlStatsEntry 2 }
|
|
|
|
fsMefFlStatsMessagesIn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of frames with ETH-LM information received for a
|
|
transaction.
|
|
"
|
|
::= { fsMefFlStatsEntry 3 }
|
|
|
|
fsMefFlStatsFarEndLossAverage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of the far-end frame-loss measured for a transaction.
|
|
"
|
|
::= { fsMefFlStatsEntry 4 }
|
|
|
|
fsMefFlStatsNearEndLossAverage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of the near-end frame-loss measured for a transaction.
|
|
"
|
|
::= { fsMefFlStatsEntry 5 }
|
|
|
|
fsMefFlStatsMeasurementType OBJECT-TYPE
|
|
SYNTAX INTEGER { singleEnded(1), dualEnded(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the frame-loss measurement (Single-ended or Dual-ended) done.
|
|
"
|
|
::= { fsMefFlStatsEntry 6 }
|
|
|
|
fsMefFlStatsFarEndLossMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the minimum value of far-end frame-loss.
|
|
"
|
|
::= { fsMefFlStatsEntry 7 }
|
|
|
|
fsMefFlStatsFarEndLossMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the maximum value of far-end frame-loss.
|
|
"
|
|
::= { fsMefFlStatsEntry 8 }
|
|
|
|
fsMefFlStatsNearEndLossMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the minimum value of near-end frame-loss.
|
|
"
|
|
::= { fsMefFlStatsEntry 9 }
|
|
|
|
fsMefFlStatsNearEndLossMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the maximum value of near-end frame-loss.
|
|
"
|
|
::= { fsMefFlStatsEntry 10 }
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- fsMefFlStatsTable END
|
|
-- -------------------------------------------------------------------------
|
|
-- ----------------------------------------------------------------------------
|
|
-- fsMefMepAvailabilityTable START
|
|
-- -------------------------------------------------------------------------
|
|
|
|
fsMefMepAvailabilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMefMepAvailabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Entity Group End Point (MEP) Availability
|
|
table.
|
|
|
|
Each row in the table is associated with a different MEP.
|
|
|
|
This table uses three indices. The first two indices are the
|
|
indices of the Maintenance Entity Group (MEG) and Maintenance
|
|
Entity (ME) tables, the reason being that a MEP is always
|
|
related to an ME and MEG.
|
|
|
|
The MEP table stores all the managed objects for availability
|
|
measurement.
|
|
|
|
The objects which are used to initiate a transaction are to
|
|
be set only when the row-status of the table is active.
|
|
'fsMefMepTransmit' naming convention is used to isolate
|
|
these objects from the others.
|
|
"
|
|
::= { fsMefPerformance 6 }
|
|
|
|
fsMefMepAvailabilityEntry OBJECT-TYPE
|
|
SYNTAX FsMefMepAvailabilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP Availability table entry"
|
|
INDEX { fsMefContextId,
|
|
fsMefMegIndex,
|
|
fsMefMeIndex,
|
|
fsMefMepIdentifier
|
|
}
|
|
::= { fsMefMepAvailabilityTable 1 }
|
|
|
|
FsMefMepAvailabilityEntry ::= SEQUENCE {
|
|
fsMefMepAvailabilityStatus FsY1731TransmitStatus,
|
|
fsMefMepAvailabilityResultOK TruthValue,
|
|
fsMefMepAvailabilityInterval FsY1731AvailabilityInterval,
|
|
fsMefMepAvailabilityDeadline Unsigned32,
|
|
fsMefMepAvailabilityLowerThreshold OCTET STRING,
|
|
fsMefMepAvailabilityUpperThreshold OCTET STRING,
|
|
fsMefMepAvailabilityModestAreaIsAvailable TruthValue,
|
|
fsMefMepAvailabilityWindowSize Unsigned32,
|
|
fsMefMepAvailabilityDestMacAddress MacAddress,
|
|
fsMefMepAvailabilityDestMepId Dot1agCfmMepIdOrZero,
|
|
fsMefMepAvailabilityDestIsMepId TruthValue,
|
|
fsMefMepAvailabilityType FsY1731AvailabilityType,
|
|
fsMefMepAvailabilitySchldDownInitTime Unsigned32,
|
|
fsMefMepAvailabilitySchldDownEndTime Unsigned32,
|
|
fsMefMepAvailabilityPriority Unsigned32,
|
|
fsMefMepAvailabilityDropEnable TruthValue,
|
|
fsMefMepAvailabilityPercentage OCTET STRING,
|
|
fsMefMepAvailabilityRowStatus RowStatus
|
|
}
|
|
|
|
fsMefMepAvailabilityStatus OBJECT-TYPE
|
|
SYNTAX FsY1731TransmitStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Enumerated value set to 'start' to initiate Availability Measurement
|
|
and 'stop' to stop Availability Measurement.
|
|
'ready' and 'notReady' indicates whether Availability Measurement
|
|
can be initiated or not.
|
|
|
|
Note: User can not set to 'ready' or 'notReady'.
|
|
"
|
|
DEFVAL { ready }
|
|
::= { fsMefMepAvailabilityEntry 1 }
|
|
|
|
fsMefMepAvailabilityResultOK OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true Initiating Availability measurement by sending
|
|
LM Message (LMM) is successful.
|
|
|
|
- false Initiating Availability measurement has failed
|
|
as failure encountered in sending LM Message (LMM).
|
|
"
|
|
DEFVAL { true }
|
|
::= { fsMefMepAvailabilityEntry 2 }
|
|
|
|
fsMefMepAvailabilityInterval OBJECT-TYPE
|
|
SYNTAX FsY1731AvailabilityInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A time interval much smaller than Deadline,
|
|
Interval between two successive LMM transmissions to be used by the MEP
|
|
for calculating Availability.
|
|
"
|
|
DEFVAL { interval100ms }
|
|
::= { fsMefMepAvailabilityEntry 3 }
|
|
|
|
fsMefMepAvailabilityDeadline OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify a timeout, in seconds, the Time interval to conduct
|
|
the availability functionality
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 4 }
|
|
|
|
fsMefMepAvailabilityLowerThreshold OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Availability frame loss ratio threshold, the lower threshold used
|
|
to define an interval as available. If far-end loss ratio is lesser than
|
|
configured lower threshold, that interval will be declared as available.
|
|
AvailabilityLowerThreshold can be equal to AvailabilityUpperThreshold.
|
|
Example: 50% should be given as 35:30:2e:30:30
|
|
39.61% should be given as 33:39:2e:36:31
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 5 }
|
|
|
|
fsMefMepAvailabilityUpperThreshold OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..6))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unavailability frame loss ratio threshold, the upper threshold to define
|
|
an interval as unavailable. If far-end loss ratio is greater than
|
|
configured upper threshold, that interval will be declared as
|
|
unavailable.
|
|
Example: 50% should be given as 35:30:2e:30:30
|
|
39.61% should be given as 33:39:2e:36:31
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 6 }
|
|
|
|
fsMefMepAvailabilityModestAreaIsAvailable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines whether the area between upper and lower
|
|
threshold is referred as available or unavailable.
|
|
|
|
True - If Calculated Frame loss ratio falls
|
|
between upper and lower threshold,
|
|
it will be declared as Available.
|
|
|
|
False - If Calculated Frame loss ratio falls
|
|
between upper and lower threshold,
|
|
it will be declared as Unavailable.
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 7 }
|
|
|
|
fsMefMepAvailabilityWindowSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of consecutive small time intervals for assessing availability
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 8 }
|
|
|
|
fsMefMepAvailabilityDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast
|
|
destination MAC address to be used for Availability Measurement.
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 9 }
|
|
|
|
fsMefMepAvailabilityDestMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the Target MAC Address Field to be
|
|
transmitted:
|
|
The Maintenance association End Point Identifier of
|
|
another MEP in the same Maintenance Association
|
|
This address will be used if the value of the column
|
|
fsMefMepAvailabilityDestIsMepId is 'true'.
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 10 }
|
|
|
|
fsMefMepAvailabilityDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for
|
|
LMM transmission during Availability Measurement.
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for LMM transmission during Availability
|
|
Measurement.
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 11 }
|
|
|
|
fsMefMepAvailabilityType OBJECT-TYPE
|
|
SYNTAX FsY1731AvailabilityType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
defStatic indicates that the algorithm for Availability Measurement
|
|
is static window algorithm. The availability measurement will be
|
|
conducted as per MEF 10.2
|
|
(Section 6.9.7. Availability Performance for a Point-to-Point EVC)
|
|
|
|
defSliding indicates that the algorithm for Availability Measurement
|
|
is sliding window algorithm. The availability measurement will be
|
|
conducted as per ITU-T Y.1563
|
|
( Section 9 Ethernet service availability )
|
|
"
|
|
DEFVAL { defStatic }
|
|
::= { fsMefMepAvailabilityEntry 12 }
|
|
|
|
fsMefMepAvailabilitySchldDownInitTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time when Scheduled down time is initiated, denotes the beginning of
|
|
time interval agreed upon by both the Subscriber and Service Provider
|
|
during which a service may be disabled by the Service Provider.
|
|
Init Time should be defined with reference to zero and deadline.
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 13 }
|
|
|
|
fsMefMepAvailabilitySchldDownEndTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time when Scheduled down time is ending, denotes the ending of
|
|
time interval agreed upon by both the Subscriber and Service Provider
|
|
during which a service may be disabled by the Service Provider.
|
|
End Time should be defined with reference to zero and deadline.
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 14 }
|
|
|
|
fsMefMepAvailabilityPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present
|
|
in the transmitted LMM frame.
|
|
"
|
|
DEFVAL { 7 }
|
|
::= { fsMefMepAvailabilityEntry 15 }
|
|
|
|
fsMefMepAvailabilityDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Enable bit value to be used in the VLAN tag, if present
|
|
in the transmitted LMM frame.
|
|
"
|
|
DEFVAL { false }
|
|
::= { fsMefMepAvailabilityEntry 16 }
|
|
|
|
fsMefMepAvailabilityPercentage OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..6))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object contains the percentage of Availability
|
|
|
|
If fsMefMepAvailabilityType is selected as defStatic,
|
|
this object contains the Availability Performance metric
|
|
as defined in MEF 10.2
|
|
(Section 6.9.7. Availability Performance for a Point-to-Point EVC)
|
|
|
|
If fsMefMepAvailabilityType is selected as defSliding,
|
|
this object contains Percent Ethernet service availability
|
|
as defined in ITU-T Y.1563
|
|
( Section 9 Ethernet service availability )
|
|
Example: 50% will be given as 35:30:2e:30:30
|
|
39.61% will be given as 33:39:2e:36:31
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 17 }
|
|
|
|
fsMefMepAvailabilityRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of MEP Availability Table row.
|
|
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated, possible values are row status active and
|
|
row status not active.
|
|
"
|
|
::= { fsMefMepAvailabilityEntry 18 }
|
|
-- -------------------------------------------------------------------------
|
|
-- fsMefMepAvailabilityTable END
|
|
-- -------------------------------------------------------------------------
|
|
|
|
END
|
|
-- ------------------------------------------------------------------------
|
|
-- END OF MIB
|
|
-- -------------------------------------------------------------------------
|