WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/supermicro/SUPERMICRO-ECFM-Y1731-MI-MIB

5261 lines
178 KiB
Plaintext
Raw Permalink Blame History

-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
-- $Id: fsmiy1731.mib,v 1.22 2013/05/17 11:52:04 siva Exp $
-- ECFM-Y1731 Proprietary MIB Definition
-- This MIB contains tables used to configure a switch running
-- ECFM-Y1731 in addition to the standard 802.1ag MIB and
-- ECFM Proprietary MIB.
SUPERMICRO-ECFM-Y1731-MI-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
enterprises,
Integer32,
Unsigned32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TruthValue, DisplayString,
TimeInterval, TimeStamp,
MacAddress, RowStatus, RowPointer FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB
Dot1agCfmMepId,
Dot1agCfmMDLevelOrNone,
Dot1agCfmMepIdOrZero FROM IEEE8021-CFM-MIB
;
fsMIY1731MIB MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "Super Micro Computer Inc."
CONTACT-INFO "support@Supermicro.com"
DESCRIPTION
"The Proprietary MIB for ECFM-Y1731 module with multiple
instance capability"
REVISION "201209050000Z"
DESCRIPTION
"The Proprietary MIB for ECFM-Y1731 module with multiple
instance capability"
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 7 }
fsMIY1731Notifications OBJECT IDENTIFIER ::= { fsMIY1731MIB 0 }
fsMIY1731MIBObjects OBJECT IDENTIFIER ::= { fsMIY1731MIB 1 }
-- ******************************************************************
-- Groups in the ECFM-Y1731 MIB Module
-- ******************************************************************
fsMIY1731System OBJECT IDENTIFIER ::= { fsMIY1731MIBObjects 1 }
fsMIY1731Context OBJECT IDENTIFIER ::= { fsMIY1731MIBObjects 2 }
-- ******************************************************************
-- Textual conventions
-- ******************************************************************
FsY1731CcmApplication ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value indicates the ETH-CC role to be or currently being
performed.
ccFaultManagement(0) Indicates ETH-CC is used for Fault Management.
ccPerformanceMonitoring(1) Indicates ETH-CC is used for Performance
Monitoring.
ccProtectionSwitching(2) Indicates ETH-CC is used for Protection
Switching
"
SYNTAX INTEGER {
ccFaultManagement (0),
ccPerformanceMonitoring (1),
ccProtectionSwitching (2)
}
FsY1731TestTlvPatternType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value indicates the Test pattern for Test TLV to be
included in LBM or TST message.
patternNullSignalWithoutCRC32(0) Pattern contains null signal without
any CRC.
patternNullSignalWithCRC32(1) Pattern contains null signal with CRC.
patternPRBSWithoutCRC32(2) Pattern contains pseudo random bit
sequence 2^-31-1 without any CRC.
patternPRBSWithCRC32(3) Pattern contains pseudo random bit
sequence 2^-31-1 with CRC.
"
SYNTAX INTEGER {
patternNullSignalWithoutCRC32 (0),
patternNullSignalWithCRC32 (1),
patternPRBSWithoutCRC32 (2),
patternPRBSWithCRC32 (3)
}
FsY1731DestType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An Enumerated value indicates the type of
transaction, unicast ,through MEPID or multicast.
unicast(0) Indicates the operation is to be unicast.
mepid(1) Indicates that MEPID of the target MEP is used for
operation.
multicast(2) Indicate the operation is Multicast .
mipid(3) Indicates that MIP info of the target is used for
operation only in MPLS-TP networks (Currently not
applicable for Ethernet).
"
SYNTAX INTEGER {
unicast (0),
mepid (1),
multicast (2),
mipid (3)
}
FsY1731TransmitStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value indicates whether particular transmission can be
initiated.
ready(0) Indicates transmission can be initiated.
notReady(1) Indicates transmission can not be initiated.
start(2) To initiate the transmission .
stop(3) To stop the transmission .
"
SYNTAX INTEGER {
ready (0),
notReady (1),
start (2),
stop (3)
}
FsY1731TransmitLbmTlvTypeOrNone ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value indicates which TLV is to be included in the LBM.
none(0) Indicates No TLV is included in the LBM.
dataTlv (1) Indicates Data TLV is included in the LBM.
testTlv (2) Indicates Test TLV is included in the LBM.
"
SYNTAX INTEGER {
none (0),
dataTlv (1),
testTlv (2)
}
FsY1731LbrErrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value indicates the received loopback reply error type.
none (0) Indicates that no error was
encountered in the received LBR.
BadMacServiceDataUnit (1) Indicates bad/corrupt mac service data unit
Crc32CheckFailure (2) Indicates CRC32 checksum failure
"
SYNTAX INTEGER {
none (0),
badMacServiceDataUnit (1),
crc32CheckFailure (2)
}
FsY1731LmmInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interval at which LMMs are sent by a MEP.
The possible values are:
interval100ms(1) LMMs are sent every 100 milliseconds.
interval1s(2) LMMs are sent every second.
interval10s(3) LMMs are sent every 10 seconds.
interval1min(4) LMMs are sent every minute.
interval10min(5) LMMs are sent every 10 minutes.
"
SYNTAX INTEGER {
interval100ms (1),
interval1s (2),
interval10s (3),
interval1min (4),
interval10min (5)
}
FsY1731TimeIntervalType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the units of interval at which LBM or TSTs are sent by a MEP.
The possible values are:
microseconds(1) units for LBMs or TSTs transmission interval are
microseconds.
milliseconds(2) units for LBMs or TSTs transmission interval are
milliseconds.
seconds(3) units for LBM or TST transmission interval are
seconds.
"
SYNTAX INTEGER {
microseconds (1),
milliseconds (2),
seconds (3)
}
FsY1731AisLckInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interval at which AIS or LCK(s) are sent by a MEP.
The possible values are:
interval1s(1) AIS or LCK(s) are sent every second.
interval1min(2) AIS or LCK(s) are sent every minute.
Note: enumerations start at one to match the 'AIS/LCK Interval
field' protocol field.
"
SYNTAX INTEGER {
interval1s (1),
interval1min (2)
}
FsY1731Traps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the notifications to be provided to Management entity.
Multiple notifications can be enabled at the same time. Notifictions
are:
none(0) Dummy Bit
bTrapTstReceivedWithError(1) The MEP has received a TST PDU with bad
mac service data unit or invalid CRC32
checksum.
bTrapFrameLoss(2) The calculated frame loss value is greater
than the configured frame loss threshold
value.
bTrapFrameDelay(3) The calculated frame delay value is greater
than the configured frame delay threshold
value.
bTrapDefRdiCondition(4) The MEP has encountered remote MEP defect
condition.
bTrapDefLossOfContinuity(5) The MEP has encountered loss of continuity
defect condition.
bTrapDefUnexpectedPeriod(6) The MEP has encountered unexpected period
defect condition.
bTrapDefUnexpectedMep(7) The MEP has encountered unexpected MEP
defect condition.
bTrapDefMisMerge(8) The MEP has encountered mismerge defect
condition.
bTrapDefUnexpectedMegLevel(9) The MEP has encountered unexpected MEG level
defect condition.
bTrapDefLocalLinkFailure(10) The MEP has encountered local link failure
defect condition.
bTrapDefInternalHWFailure(11) The MEP has encountered internal hardware
failure defect condition.
bTrapDefInternalSWFailure(12) The MEP has encountered internal software
failure defect condition.
bTrapDefAisCondition(13) The MEP has encountered alarm indication
defect condition.
bTrapDefLckCondition(14) The MEP has encountered locked defect
condition. "
SYNTAX BITS{
none (0),
bTrapTstReceivedWithError (1),
bTrapFrameLoss (2),
bTrapFrameDelay (3),
bTrapDefRdiCondition (4),
bTrapDefLossOfContinuity (5),
bTrapDefUnexpectedPeriod (6),
bTrapDefUnexpectedMep (7),
bTrapDefMisMerge (8),
bTrapDefUnexpectedMegLevel (9),
bTrapDefLocalLinkFailure (10),
bTrapDefInternalHWFailure (11),
bTrapDefInternalSWFailure (12),
bTrapDefAisCondition (13),
bTrapDefLckCondition (14)
}
FsY1731MepDefects ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A MEP can detect and report a number of defects,
and multiple defects can be present at the same time.
These defects conditions are:
none (0) Dummy Bit
bDefRdiCondition (1) The MEP has encountered remote MEP defect
condition.
bDefLossOfContinuity (2) The MEP has encountered loss of continuity
defect condition.
bDefUnexpectedPeriod (3) The MEP has encountered unexpected period
defect condition.
bDefUnexpectedMep (4) The MEP has encountered unexpected MEP defect
condition.
bDefMisMerge (5) The MEP has encountered mismerge defect
condition.
bDefUnexpectedMegLevel (6) The MEP has encountered unexpected MEG level
defect condition.
bDefLocalLinkFailure (7) The MEP has encountered local link failure
defect condition.
bDefInternalHWFailure (8) The MEP has encountered internal hardware
failure defect condition.
bDefInternalSWFailure (9) The MEP has encountered internal software
failure defect condition.
bDefAisCondition(10) The MEP has encountered alarm indication defect
condition.
bDefLckCondition(11) The MEP has encountered locked defect
condition. "
SYNTAX BITS{
none (0),
bDefRdiCondition (1),
bDefLossOfContinuity (2),
bDefUnexpectedPeriod (3),
bDefUnexpectedMep (4),
bDefMisMerge (5),
bDefUnexpectedMegLevel (6),
bDefLocalLinkFailure (7),
bDefInternalHWFailure (8),
bDefInternalSWFailure (9),
bDefAisCondition (10),
bDefLckCondition (11)
}
FsY1731ErrorLogType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A MEP can detect and report a number of defects.
logRdiConditionEntry(1) The MEP has encountered remote MEP defect
condition entry.
logLossOfContinuityEntry(2) The MEP has encountered loss of continuity
defect condition entry.
logUnexpectedPeriodEntry(3) The MEP has encountered unexpected period
defect condition entry.
logUnexpectedMepEntry(4) The MEP has encountered unexpected MEP
defect condition entry.
logMisMergeEntry(5) The MEP has encountered mismerge defect
condition entry.
logUnexpectedMegLevelEntry(6) The MEP has encountered unexpected MEG
level defect condition entry.
logLocalLinkFailureEntry(7) The MEP has encountered local link failure
defect condition entry.
logInternalHWFailureEntry(8) The MEP has encountered internal hardware
failure defect condition entry.
logInternalSWFailureEntry(9) The MEP has encountered internal software
failure defect condition entry.
logAisConditonEntry(10) The MEP has encountered alarm indication
defect condition entry.
logLckConditionEntry(11) The MEP has encountered locked defect
condition entry.
logRdiConditionExit(12) The MEP has encountered remote MEP defect
condition exit.
logLossOfContinuityExit(13) The MEP has encountered loss of continuity
defect condition exit.
logUnexpectedPeriodExit(14) The MEP has encountered unexpected period
defect condition exit.
logUnexpectedMepExit(15) The MEP has encountered unexpected MEP
defect condition exit.
logMisMergeExit(16) The MEP has encountered mismerge defect
condition exit.
logUnexpectedMegLevelExit(17) The MEP has encountered unexpected MEG level
defect condition exit.
logLocalLinkFailureExit(18) The MEP has encountered local link failure
defect condition exit.
logInternalHWFailureExit(19) The MEP has encountered internal hardware
failure defect condition exit.
logInternalSWFailureExit(20) The MEP has encountered internal software
failure defect condition exit.
logAisConditonExit(21) The MEP has encountered alarm indication
defect condition exit.
logLckConditionExit(22) The MEP has encountered locked defect
condition exit."
SYNTAX INTEGER{
logRdiConditionEntry(1),
logLossOfContinuityEntry(2),
logUnexpectedPeriodEntry(3),
logUnexpectedMepEntry(4),
logMisMergeEntry(5),
logUnexpectedMegLevelEntry(6),
logLocalLinkFailureEntry(7),
logInternalHWFailureEntry(8),
logInternalSWFailureEntry(9),
logAisConditonEntry(10),
logLckConditionEntry(11),
logRdiConditionExit(12),
logLossOfContinuityExit(13),
logUnexpectedPeriodExit(14),
logUnexpectedMepExit(15),
logMisMergeExit(16),
logUnexpectedMegLevelExit(17),
logLocalLinkFailureExit(18),
logInternalHWFailureExit(19),
logInternalSWFailureExit(20),
logAisConditonExit(21),
logLckConditionExit(22)
}
FsY1731TimeRepresentation ::= TEXTUAL-CONVENTION
DISPLAY-HINT "4d:4d"
STATUS current
DESCRIPTION
"A specification used to represent time stamp.
field octets contents range
----- ------ -------- -----
1 1-4 seconds 0..4294967295
2 5-8 nanoseconds 0..0..4294967295
"
SYNTAX OCTET STRING (SIZE (8))
FsY1731EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
FsY1731AvailabilityInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interval at which Availability Measurement
is carried out by sendiong LMM.
The possible values are:
interval100ms(1) Availability Measurement is carried out at every 100 milliseconds.
interval1s(2) Availability Measurement is carried out at every second.
interval10s(3) Availability Measurement is carried out at every 10 seconds.
interval1min(4) Availability Measurement is carried out at every minute.
interval10min(5) Availability Measurement is carried out at every 10 minutes.
interval10min(6) Availability Measurement is carried out at every 30 hour.
interval10min(7) Availability Measurement is carried out at every 1 hour.
"
SYNTAX INTEGER {
interval100ms (1),
interval1s (2),
interval10s (3),
interval1min (4),
interval10min (5),
interval30min (6),
interval1hour (7)
}
FsY1731AvailabilityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates type of availability measurement to be carried out
The valid values are:
Static (1) Static Availability Measurement will be carried out.
Sliding(2) Sliding Availability Measurement will be carried out.
"
SYNTAX INTEGER {
defStatic (1),
defSliding (2)
}
-- *******************************************************************
-- The Context level object. This group will contain all the
-- MIB objects needed to access and modify per context objects.
-- *******************************************************************
fsMIY1731ContextTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731ContextEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of per virtual context ECFM-Y1731 Module Parameters."
::= { fsMIY1731Context 1 }
fsMIY1731ContextEntry OBJECT-TYPE
SYNTAX FsMIY1731ContextEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per virtual context ECFM-Y1731 module parmaters."
INDEX { fsMIY1731ContextId }
::= { fsMIY1731ContextTable 1 }
FsMIY1731ContextEntry ::= SEQUENCE {
fsMIY1731ContextId Unsigned32,
fsMIY1731ContextName DisplayString,
fsMIY1731FrameLossBufferClear TruthValue,
fsMIY1731FrameDelayBufferClear TruthValue,
fsMIY1731LbrCacheClear TruthValue,
fsMIY1731ErrorLogClear TruthValue,
fsMIY1731FrameLossBufferSize Integer32,
fsMIY1731FrameDelayBufferSize Integer32,
fsMIY1731LbrCacheSize Integer32,
fsMIY1731LbrCacheHoldTime Integer32,
fsMIY1731TrapControl FsY1731Traps,
fsMIY1731ErrorLogStatus FsY1731EnabledStatus,
fsMIY1731ErrorLogSize Integer32,
fsMIY1731OperStatus FsY1731EnabledStatus,
fsMIY1731LbrCacheStatus INTEGER
}
fsMIY1731ContextId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the virtual context in the system.
"
::= { fsMIY1731ContextEntry 1 }
fsMIY1731ContextName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the virtual context.
"
::= { fsMIY1731ContextEntry 2 }
fsMIY1731FrameLossBufferClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trigger to remove the contents of Buffer maintained for storing
frame-loss measured at various times.
Note: Get operation value should be ignored.
"
::= { fsMIY1731ContextEntry 3 }
fsMIY1731FrameDelayBufferClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trigger to remove the contents of Buffer maintained for storing
frame-delay measured at various times.
Note: Get operation value should be ignored.
"
::= { fsMIY1731ContextEntry 4 }
fsMIY1731LbrCacheClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trigger to remove the contents of loopback cache maintained for
storing loop back replies.
Note: Get operation value should be ignored.
"
::= { fsMIY1731ContextEntry 5 }
fsMIY1731ErrorLogClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trigger to remove the contents of continuity check error log
maintained to store continuity check errors detected by MEP.
Note: Get operation value should be ignored.
"
::= { fsMIY1731ContextEntry 6 }
fsMIY1731FrameLossBufferSize OBJECT-TYPE
SYNTAX Integer32(1..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum size (in entries) of the Frame Loss Buffer.
"
DEFVAL { 1024 }
::= { fsMIY1731ContextEntry 7 }
fsMIY1731FrameDelayBufferSize OBJECT-TYPE
SYNTAX Integer32(1..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum number of entries for the Frame Delay Buffer
"
DEFVAL { 1024 }
::= { fsMIY1731ContextEntry 8 }
fsMIY1731LbrCacheSize OBJECT-TYPE
SYNTAX Integer32(1..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum number of entries for the loopback replies (LBR) Cache
"
DEFVAL { 1024 }
::= { fsMIY1731ContextEntry 9 }
fsMIY1731LbrCacheHoldTime OBJECT-TYPE
SYNTAX Integer32(1..2880)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Time (in minutes) for which loopback replies (LBR) cache table
entries are retained.
"
DEFVAL { 1440 }
::= { fsMIY1731ContextEntry 10 }
fsMIY1731TrapControl OBJECT-TYPE
SYNTAX FsY1731Traps
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A vector of Boolean notification types, used to enable or disable the
Y1731 notification types:
bTrapBadPduReceived
bTrapFrameLoss
bTrapFrameDelay
bTrapDefRdiCondition
bTrapDefLossOfContinuity
bTrapDefUnexpectedPeriod
bTrapDefUnexpectedMep
bTrapDefMisMerge
bTrapDefUnexpectedMegLevel
bTrapDefLocalLinkFailure
bTrapDefInternalHWFailure
bTrapDefInternalSWFailure
bTrapDefAisCondition
bTrapDefLckCondition"
::= { fsMIY1731ContextEntry 11 }
fsMIY1731ErrorLogStatus OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of Error Log.
This enables or disables the logging of errors or defects
detected by MEP.
"
DEFVAL { enabled }
::= { fsMIY1731ContextEntry 12 }
fsMIY1731ErrorLogSize OBJECT-TYPE
SYNTAX Integer32(1..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum number of entries for the Error Log,
only if fsMIY1731ErrorLogStatus is enabled.
"
DEFVAL { 1024 }
::= { fsMIY1731ContextEntry 13 }
fsMIY1731OperStatus OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status of Ethernet Y1731 functionality
in CFM module. This enables or disables Y1731 in the system.
A value of 'enabled' (1) indicates that Y1731 is enabled in the
device. A value of 'disabled' (2) indicates that Y1731 is disabled
in the device.
Functionalities of ECFM would be according to Y1731 if Y1731 is
enabled.
Note: The ECFM Module must be enabled for Y1731 to enable or disable.
"
DEFVAL { disabled }
::= { fsMIY1731ContextEntry 14 }
fsMIY1731LbrCacheStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of LBR cache.
This enables or disables caching of LBRs
"
DEFVAL { enabled }
::= { fsMIY1731ContextEntry 15 }
-- ******************************************************************
-- The Maintenance Entity Group Managed Object. This group contains all
-- the MIB objects used to maintain Maintenance Entities.
-- ******************************************************************
-- ******************************************************************
-- The Maintenance Entity Group (MEG) Table
-- ******************************************************************
fsMIY1731MegTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731MegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Entity Group table. Each row in the table
represents a different Maintenance Entity Group.
A Maintenance Entity Group is described in ITU-T Recommendation
Y.1731 as the one which includes different MEs that satisfy the
following conditions:
- MEs in a MEG exist in the same administrative boundary; and
- MEs in a MEG have the same MEG Level; and
- MEs in a MEG belong to the same point-to-point ETH connection or
multipoint ETH connectivity.
"
::= { fsMIY1731Context 2 }
fsMIY1731MegEntry OBJECT-TYPE
SYNTAX FsMIY1731MegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Entity Group table entry. This entry is not lost
upon reboot. It is backed up by stable storage.
"
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex }
::= { fsMIY1731MegTable 1 }
FsMIY1731MegEntry ::= SEQUENCE {
fsMIY1731MegIndex Unsigned32,
fsMIY1731MegClientMEGLevel Dot1agCfmMDLevelOrNone,
fsMIY1731MegVlanPriority Integer32,
fsMIY1731MegDropEnable TruthValue,
fsMIY1731MegRowStatus RowStatus
}
fsMIY1731MegIndex OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the Maintenance Entity Group table.
"
::= { fsMIY1731MegEntry 1 }
fsMIY1731MegClientMEGLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevelOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MEG Level at which the most immediate client layer MEPs or MIPs
exist.
The value (-1) is reserved to indicate that no client MEG level has
been configured.
"
DEFVAL { -1 }
::= { fsMIY1731MegEntry 2 }
fsMIY1731MegVlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG
until user explicitly configures particular frame's priority.
"
DEFVAL { 7 }
::= { fsMIY1731MegEntry 3 }
fsMIY1731MegDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted CFM frame.
Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG
until user explicitly configures particular frame's drop enable
parameter.
"
DEFVAL { false }
::= { fsMIY1731MegEntry 4 }
fsMIY1731MegRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of MEG row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible values are row status active and
row status not active.
"
::= { fsMIY1731MegEntry 5 }
-- ******************************************************************
-- The Maintenance Entity Object. This group contains all the
-- MIB objects used to maintain Maintenance Entities in the MIB.
-- ******************************************************************
-- ******************************************************************
-- The Maintenance Entity (ME) Table
-- ******************************************************************
fsMIY1731MeTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731MeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Entity table. Each row in the table represents
an ME. An ME represents a relationship between two MEPs, each
configured with a single service instance.
Configuring a Maintenance Entity Group End Point (MEP) at each
of the DSAPs creates a Maintenance Entity (ME) to monitor
that connectionless connectivity. The ITU-Carrier Code (ICC) and
Unique MEGID Code (UMC) form the Maintenance Entity Group Identifier
(MEGID) that is carried in CFM Messages to identify incorrect
connectivity among Service Instances. A small integer, the
Maintenance Entity Group End Point Identifier (MEPID), identifies
each MEP among those configured on a single ME.
This table uses two indices, first index is the index of the
Maintenance Entity Group table.
The writable objects in this table need to be persistent
upon reboot or restart of a device.
"
::= { fsMIY1731Context 3 }
fsMIY1731MeEntry OBJECT-TYPE
SYNTAX FsMIY1731MeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ME table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex }
::= { fsMIY1731MeTable 1 }
FsMIY1731MeEntry ::= SEQUENCE {
fsMIY1731MeIndex Unsigned32,
fsMIY1731MeCciEnabled TruthValue,
fsMIY1731MeCcmApplication FsY1731CcmApplication,
fsMIY1731MeMegIdIcc OCTET STRING,
fsMIY1731MeMegIdUmc OCTET STRING,
fsMIY1731MeRowStatus RowStatus
}
fsMIY1731MeIndex OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the ME table.
"
::= { fsMIY1731MeEntry 1 }
fsMIY1731MeCciEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, all MEPs in the ME will generate CCM messages.
"
DEFVAL { false }
::= { fsMIY1731MeEntry 2 }
fsMIY1731MeCcmApplication OBJECT-TYPE
SYNTAX FsY1731CcmApplication
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An enumerated value indicating the ETH-CC Role.
Note: Performance Monitoring is applicable only for point-to-point
Maintenance Entity (ME).
"
DEFVAL { ccFaultManagement }
::= { fsMIY1731MeEntry 3 }
fsMIY1731MeMegIdIcc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique code assigned to Network Operator or Service Provider maintained
by ITU-T Telecommunication Standardization Bureau.
The ITU Carrier Code used to form MEGID.
This object contains non-null ICC value if
it is configured by the user, otherwise null
ICC value with octet size 0 should be
assigned.
"
::= { fsMIY1731MeEntry 4 }
fsMIY1731MeMegIdUmc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique code assigned by Network Operator or Service Provider
and is appended to fsMIY1731MeMegIdIcc to form the MEGID
The unique MEGID Code used to form MEGID.
This object contains non-null UMC value if
it is configured by the user, otherwise null
UMC value with octet size 0 should be
assigned.
"
::= { fsMIY1731MeEntry 5 }
fsMIY1731MeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of ME row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible values are row status active and
row status not active.
"
::= { fsMIY1731MeEntry 6 }
-- ******************************************************************
-- The MEP Object. This object represents a Maintenance Entity Group
-- End Point as described in ITU-T Y.1731 document.
-- ******************************************************************
-- ******************************************************************
-- The MEP Table
-- ******************************************************************
fsMIY1731MepTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731MepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Entity Group End Point (MEP) table.
Each row in the table represents a different MEP. A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses. It is an end point of a
single Maintenance Entity.
This table uses three indices. The first two indices are the
indices of the Maintenance Entity Group (MEG) and Maintenance
Entity (ME) tables, the reason being that a MEP is always
related to an ME and MEG.
The MEP table stores all the managed objects for sending
LBM, LTM, AIS and LCK. This table also stores all the managed
objects required for monitoring the performance.
The objects which are used to initiate a transaction are to
be set only when the row-status of the table is active.
'fsMIY1731MepTransmit' naming convention is used to isolate
these objects from the others.
"
::= { fsMIY1731Context 4 }
fsMIY1731MepEntry OBJECT-TYPE
SYNTAX FsMIY1731MepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MEP table entry"
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier
}
::= { fsMIY1731MepTable 1 }
FsMIY1731MepEntry ::= SEQUENCE {
fsMIY1731MepIdentifier Dot1agCfmMepId,
fsMIY1731MepOutOfService TruthValue,
fsMIY1731MepRdiCapability FsY1731EnabledStatus,
fsMIY1731MepRdiPeriod Unsigned32,
fsMIY1731MepCcmDropEnable TruthValue,
fsMIY1731MepCcmPriority Integer32,
fsMIY1731MepMulticastLbmRecvCapability FsY1731EnabledStatus,
fsMIY1731MepLoopbackCapability FsY1731EnabledStatus,
fsMIY1731MepLbmCurrentTransId Unsigned32,
fsMIY1731MepTransmitLbmStatus FsY1731TransmitStatus,
fsMIY1731MepTransmitLbmResultOK TruthValue,
fsMIY1731MepTransmitLbmDestMacAddress MacAddress,
fsMIY1731MepTransmitLbmDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731MepTransmitLbmDestType FsY1731DestType,
fsMIY1731MepTransmitLbmMessages Integer32,
fsMIY1731MepTransmitLbmInterval Unsigned32,
fsMIY1731MepTransmitLbmIntervalType FsY1731TimeIntervalType,
fsMIY1731MepTransmitLbmDeadline Unsigned32,
fsMIY1731MepTransmitLbmDropEnable TruthValue,
fsMIY1731MepTransmitLbmPriority Integer32,
fsMIY1731MepTransmitLbmVariableBytes TruthValue,
fsMIY1731MepTransmitLbmTlvType FsY1731TransmitLbmTlvTypeOrNone,
fsMIY1731MepTransmitLbmDataPattern OCTET STRING,
fsMIY1731MepTransmitLbmDataPatternSize Unsigned32,
fsMIY1731MepTransmitLbmTestPatternType FsY1731TestTlvPatternType,
fsMIY1731MepTransmitLbmTestPatternSize Unsigned32,
fsMIY1731MepTransmitLbmSeqNumber Unsigned32,
fsMIY1731MepBitErroredLbrIn Unsigned32,
fsMIY1731MepTransmitLtmStatus Integer32,
fsMIY1731MepTransmitLtmResultOK TruthValue,
fsMIY1731MepTransmitLtmFlags BITS,
fsMIY1731MepTransmitLtmTargetMacAddress MacAddress,
fsMIY1731MepTransmitLtmTargetMepId Dot1agCfmMepIdOrZero,
fsMIY1731MepTransmitLtmTargetIsMepId TruthValue,
fsMIY1731MepTransmitLtmTtl Unsigned32,
fsMIY1731MepTransmitLtmDropEnable TruthValue,
fsMIY1731MepTransmitLtmPriority Integer32,
fsMIY1731MepTransmitLtmSeqNumber Unsigned32,
fsMIY1731MepTransmitLtmTimeout TimeInterval,
fsMIY1731MepMulticastTstRecvCapability FsY1731EnabledStatus,
fsMIY1731MepTransmitTstPatternType FsY1731TestTlvPatternType,
fsMIY1731MepTransmitTstVariableBytes TruthValue,
fsMIY1731MepTransmitTstPatternSize Unsigned32,
fsMIY1731MepTransmitTstDestType FsY1731DestType,
fsMIY1731MepTransmitTstDestMacAddress MacAddress,
fsMIY1731MepTransmitTstDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731MepTransmitTstSeqNumber Unsigned32,
fsMIY1731MepTransmitTstPriority Integer32,
fsMIY1731MepTransmitTstDropEnable TruthValue,
fsMIY1731MepTransmitTstMessages Integer32,
fsMIY1731MepTransmitTstStatus FsY1731TransmitStatus,
fsMIY1731MepTransmitTstResultOK TruthValue,
fsMIY1731MepTransmitTstInterval Unsigned32,
fsMIY1731MepTransmitTstIntervalType FsY1731TimeIntervalType,
fsMIY1731MepTransmitTstDeadline Unsigned32,
fsMIY1731MepBitErroredTstIn Unsigned32,
fsMIY1731MepValidTstIn Unsigned32,
fsMIY1731MepTstOut Unsigned32,
fsMIY1731MepTransmitLmmStatus FsY1731TransmitStatus,
fsMIY1731MepTransmitLmmResultOK TruthValue,
fsMIY1731MepTransmitLmmInterval FsY1731LmmInterval,
fsMIY1731MepTransmitLmmDeadline Unsigned32,
fsMIY1731MepTransmitLmmDropEnable TruthValue,
fsMIY1731MepTransmitLmmPriority Integer32,
fsMIY1731MepTransmitLmmDestMacAddress MacAddress,
fsMIY1731MepTransmitLmmDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731MepTransmitLmmDestIsMepId TruthValue,
fsMIY1731MepTransmitLmmMessages Integer32,
fsMIY1731MepTxFCf Unsigned32,
fsMIY1731MepRxFCb Unsigned32,
fsMIY1731MepTxFCb Unsigned32,
fsMIY1731MepNearEndFrameLossThreshold Unsigned32,
fsMIY1731MepFarEndFrameLossThreshold Unsigned32,
fsMIY1731MepTransmitDmStatus FsY1731TransmitStatus,
fsMIY1731MepTransmitDmResultOK TruthValue,
fsMIY1731MepTransmitDmType INTEGER,
fsMIY1731MepTransmitDmInterval TimeInterval,
fsMIY1731MepTransmitDmMessages Integer32,
fsMIY1731MepTransmitDmmDropEnable TruthValue,
fsMIY1731MepTransmit1DmDropEnable TruthValue,
fsMIY1731MepTransmitDmmPriority Integer32,
fsMIY1731MepTransmit1DmPriority Integer32,
fsMIY1731MepTransmitDmDestMacAddress MacAddress,
fsMIY1731MepTransmitDmDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731MepTransmitDmDestIsMepId TruthValue,
fsMIY1731MepTransmitDmDeadline Unsigned32,
fsMIY1731MepDmrOptionalFields TruthValue,
fsMIY1731Mep1DmRecvCapability INTEGER,
fsMIY1731MepFrameDelayThreshold Unsigned32,
fsMIY1731MepAisCapability FsY1731EnabledStatus,
fsMIY1731MepAisCondition TruthValue,
fsMIY1731MepAisInterval FsY1731AisLckInterval,
fsMIY1731MepAisPeriod Unsigned32,
fsMIY1731MepAisPriority Integer32,
fsMIY1731MepAisDropEnable TruthValue,
fsMIY1731MepAisDestIsMulticast TruthValue,
fsMIY1731MepAisClientMacAddress MacAddress,
fsMIY1731MepLckDestIsMulticast TruthValue,
fsMIY1731MepLckClientMacAddress MacAddress,
fsMIY1731MepLckCondition TruthValue,
fsMIY1731MepLckInterval FsY1731AisLckInterval,
fsMIY1731MepLckPeriod Unsigned32,
fsMIY1731MepLckPriority Unsigned32,
fsMIY1731MepLckDropEnable TruthValue,
fsMIY1731MepLckDelay TimeInterval,
fsMIY1731MepDefectConditions FsY1731MepDefects,
fsMIY1731MepUnicastCcmMacAddress MacAddress,
fsMIY1731MepRowStatus RowStatus,
fsMIY1731MepRxFCf Unsigned32,
fsMIY1731Mep1DmTransInterval TimeInterval,
fsMIY1731MepTransmitThDestMacAddress MacAddress,
fsMIY1731MepTransmitThDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731MepTransmitThDestIsMepId TruthValue,
fsMIY1731MepTransmitThMessages Integer32,
fsMIY1731MepTransmitThPps Unsigned32,
fsMIY1731MepTransmitThDeadline Unsigned32,
fsMIY1731MepTransmitThType INTEGER,
fsMIY1731MepTransmitThStatus FsY1731TransmitStatus,
fsMIY1731MepTransmitThFrameSize Unsigned32,
fsMIY1731MepTransmitThBurstMessages Integer32,
fsMIY1731MepTransmitThBurstDeadline Unsigned32,
fsMIY1731MepTransmitThBurstType INTEGER,
fsMIY1731MepTransmitThTestPatternType FsY1731TestTlvPatternType,
fsMIY1731MepThVerifiedBps Unsigned32,
fsMIY1731MepThUnVerifiedBps Unsigned32,
fsMIY1731MepTransmitLbmMode INTEGER,
fsMIY1731MepLbmOut Unsigned32,
fsMIY1731MepTransmitLbmTimeout TimeInterval,
fsMIY1731MepTstCapability FsY1731EnabledStatus,
fsMIY1731MepTransmitThResultOK TruthValue,
fsMIY1731MepThVerifiedFrameSize Unsigned32,
fsMIY1731MepAisOffload INTEGER,
fsMIY1731MepLbmTTL Unsigned32,
fsMIY1731MepLbmIcc DisplayString,
fsMIY1731MepLbmNodeId Unsigned32,
fsMIY1731MepLbmIfNum Unsigned32
}
fsMIY1731MepIdentifier OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Integer that is unique among all the MEPs in the same ME.
Other definition is: a small integer, unique over a given
Maintenance Entity, identifying a specific Maintenance
Entity Group End Point.
MEP Identifier is also known as the MEPID.
"
::= { fsMIY1731MepEntry 1 }
fsMIY1731MepOutOfService OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean indicating the administrative service that is being or to be
performed.
true indicates operation needs to be performed Out-of-service
and false indicates operation needs to be performed In-service.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 2 }
fsMIY1731MepRdiCapability OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of RDI Transmission capability.
This enables or disables the transmission of RDI bit in the CCM PDU by
the MEP.
If fsMIY1731MepRdiPeriod is provided then it will be enabled for that
period only.
"
DEFVAL { enabled }
::= { fsMIY1731MepEntry 3 }
fsMIY1731MepRdiPeriod OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability)
is enabled.
"
::= { fsMIY1731MepEntry 4 }
fsMIY1731MepCcmDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted CCM frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 5 }
fsMIY1731MepCcmPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Mib object is used for configuring CCM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority value to be used in the VLAN tag,
if present in the transmitted CCM frame. The default value is 7.
For MPLS-TP (LSP/PW):
This indicates the 3-bit EXP value that needs to be used in the
MPLS header of CCM frame.
The default EXP value is 7. The range is (0..7).
Note: Diff-serv based EXP field mapping is not supported.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 6 }
fsMIY1731MepMulticastLbmRecvCapability OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of Multicast LBM frame reception. This enables
or disables the capability of MEP to process the multicast LBM.
A value of 'enabled' (1) indicates to accept and process multicast LBM.
A value of 'disabled' (2) indicates not to process the multicast LBM.
"
DEFVAL { disabled }
::= { fsMIY1731MepEntry 7 }
fsMIY1731MepLoopbackCapability OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of Loopback (ping) capability.
This enables or disables capability of MEP to initiate and process
Loopback (ping) operation.
A value of 'enabled' (1) indicates to initiate as well as process LBM.
A value of 'disabled' (2) indicates not to initiate as well as process
the LBM.
"
DEFVAL { enabled }
::= { fsMIY1731MepEntry 8 }
fsMIY1731MepLbmCurrentTransId OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the current LBM Transaction.
"
::= { fsMIY1731MepEntry 9 }
fsMIY1731MepTransmitLbmStatus OBJECT-TYPE
SYNTAX FsY1731TransmitStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to 'start' to initiate LBM transmission
and 'stop' to stop LBM transmission.
'ready' and 'notReady' indicates whether LBM can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
"
DEFVAL { ready }
::= { fsMIY1731MepEntry 10 }
fsMIY1731MepTransmitLbmResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of LBM transaction,
- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
be sent.
"
DEFVAL { true }
::= { fsMIY1731MepEntry 11 }
fsMIY1731MepTransmitLbmDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitLbmDestType is 'Unicast'
"
::= { fsMIY1731MepEntry 12 }
fsMIY1731MepTransmitLbmDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maintenance association End Point Identifier of another
MEP in the same Maintenance Entity to which the LBM is
to be sent.
This address will be used if the value of the column
fsMIY1731MepTransmitLbmDestType is for 'MepID'.
"
::= { fsMIY1731MepEntry 13 }
fsMIY1731MepTransmitLbmDestType OBJECT-TYPE
SYNTAX FsY1731DestType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Lbm Destination Type i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network).
"
::= { fsMIY1731MepEntry 14 }
fsMIY1731MepTransmitLbmMessages OBJECT-TYPE
SYNTAX Integer32 (0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of Loopback messages to be transmitted."
::= { fsMIY1731MepEntry 15 }
fsMIY1731MepTransmitLbmInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between two successive LBM transmissions to be used by the
MEP.
fsMIY1731MepTransmitLbmIntervalType are used as units for this object.
Ranges applicable for allowed units are:
10-1000 for microseconds
1-1000 for millseconds
1-600 for seconds
"
DEFVAL { 1 }
::= { fsMIY1731MepEntry 16 }
fsMIY1731MepTransmitLbmIntervalType OBJECT-TYPE
SYNTAX FsY1731TimeIntervalType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Units of fsMIY1731MepTransmitLbmInterval to be used by the
MEP for LBM transmission.
"
DEFVAL { seconds }
::= { fsMIY1731MepEntry 17 }
fsMIY1731MepTransmitLbmDeadline OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a timeout, in seconds, before loopback (ping) exits.
Loopback (ping) exits, if configured number of messages
fsMIY1731MepTransmitLbmMessages are sent before timeout.
"
::= { fsMIY1731MepEntry 18 }
fsMIY1731MepTransmitLbmDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LBM frame.
"
DEFVAL { true }
::= { fsMIY1731MepEntry 19 }
fsMIY1731MepTransmitLbmPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Mib object is used for configuring LBM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority value to be used in the VLAN tag,
if present in the transmitted LBM frame. The default value is 7.
For MPLS-TP (LSP/PW):
This indicates the 3-bit EXP value that needs to be used in the
MPLS header of LBM frame.
The default EXP value is 7. The range is (0..7).
Note: Diff-serv based EXP field mapping is not supported.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 20 }
fsMIY1731MepTransmitLbmVariableBytes OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates a varying number of data bytes is to be transmitted in the
LBM.
'true' indicates that LBMs to be transmitted are with varying bytes
of data and 'false' indicates that LBM(s)to be transmitted is of
the same size.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 21 }
fsMIY1731MepTransmitLbmTlvType OBJECT-TYPE
SYNTAX FsY1731TransmitLbmTlvTypeOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of the TLV to be included in the LBM frame, if
required to be send.
"
DEFVAL { none }
::= { fsMIY1731MepEntry 22 }
fsMIY1731MepTransmitLbmDataPattern OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..8970))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent, determined by the
fsMIY1731MepTransmitLbmTlvType.
Size of data value sent in LBM is determined by the
fsMIY1731MepTransmitLbmDataPatternSize.
Default value of Data Pattern is all 1 Sequence.
"
::= { fsMIY1731MepEntry 23 }
fsMIY1731MepTransmitLbmDataPatternSize OBJECT-TYPE
SYNTAX Unsigned32(0..8970)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the size (bytes) of the
pattern(fsMIY1731MepTransmitLbmDataPatterm)
to be included in the Data TLV, if the Data TLV is to be included in the
LBM.
fsMIY1731MepTransmitLbmDataPattern should be of zero length if this object
is zero.
Maximum frame size supported by ECFM is 9K,
following is the calculation for the maximum size of data-tlv supported
by ECFM :
18 bytes - Ethernet Header
4 bytes - CFM Header
4 bytes - Transaction-Id
1 byte - End Tlv
3 bytes - Data Tlv Over Head
9000 - 30 = 8970 bytes
"
DEFVAL { 34 }
::= { fsMIY1731MepEntry 24 }
fsMIY1731MepTransmitLbmTestPatternType OBJECT-TYPE
SYNTAX FsY1731TestTlvPatternType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of pattern to be included in the test TLV of the LBM,
if the Test TLV is selected to be sent.
"
DEFVAL { patternPRBSWithoutCRC32 }
::= { fsMIY1731MepEntry 25 }
fsMIY1731MepTransmitLbmTestPatternSize OBJECT-TYPE
SYNTAX Unsigned32(0..8969)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the size of the pattern to be included in the Test TLV,
if the Test TLV is selected to be sent.
Maximum frame size supported by ECFM is 9K,
following is the calculation for the maximum size of test-tlv supported
by ECFM :
18 bytes - Ethernet Header
4 bytes - CFM Header
4 bytes - Transaction-Id
1 byte - End Tlv
4 bytes - Test Tlv Over Head
9000 - 31 = 8969 bytes
"
DEFVAL { 33 }
::= { fsMIY1731MepEntry 26 }
fsMIY1731MepTransmitLbmSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number to be transmitted in the next LBM.
"
::= { fsMIY1731MepEntry 27 }
fsMIY1731MepBitErroredLbrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of bit-errored LBRs received.
LBR with different pattern as of Test TLV in the sent LBM is considered
as bit-errored LBR
"
::= { fsMIY1731MepEntry 28 }
fsMIY1731MepTransmitLtmStatus OBJECT-TYPE
SYNTAX INTEGER {
ready (0),
notReady (1),
transmit (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Enumerated value set to 'transmit' to initiate LTM transmission.
'ready' and 'notReady' indicates whether LTM can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
"
DEFVAL { ready }
::= { fsMIY1731MepEntry 29 }
fsMIY1731MepTransmitLtmResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent
"
DEFVAL { true }
::= { fsMIY1731MepEntry 30 }
fsMIY1731MepTransmitLtmFlags OBJECT-TYPE
SYNTAX BITS {
useHWonly (0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flags field for LTMs transmitted by the MEP. Indicates that only MAC
address learned in bridge's forwarding tables is to be used to forward
the LTM to the next hop."
DEFVAL {{ useHWonly }}
::= { fsMIY1731MepEntry 31 }
fsMIY1731MepTransmitLtmTargetMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitLtmTargetIsMepId is 'false'.
"
::= { fsMIY1731MepEntry 32 }
fsMIY1731MepTransmitLtmTargetMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
fsMIY1731MepTransmitLtmTargetIsMepId is 'true'.
"
::= { fsMIY1731MepEntry 33 }
fsMIY1731MepTransmitLtmTargetIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
"
::= { fsMIY1731MepEntry 34 }
fsMIY1731MepTransmitLtmTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each entity that handles the LTM.
The value received in the LTM is returned
in the LTR. If 0 on input, the LTM is not transmitted to the
next hop.
"
DEFVAL {64}
::= { fsMIY1731MepEntry 35 }
fsMIY1731MepTransmitLtmDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted LTM frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 36 }
fsMIY1731MepTransmitLtmPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LTM frame.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 37 }
fsMIY1731MepTransmitLtmSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number to be transmitted in next LBM.
"
::= { fsMIY1731MepEntry 38 }
fsMIY1731MepTransmitLtmTimeout OBJECT-TYPE
SYNTAX TimeInterval(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time for all the replies (LTR) of a LTM to be received by
the MEP.No reply (LTR) would be entertained thereafter (timeout).
"
DEFVAL { 500 }
::= { fsMIY1731MepEntry 39 }
fsMIY1731MepMulticastTstRecvCapability OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of multicast TST frame reception. This
enables or disables the capability of MEP to process the multicast TST.
A value of 'enabled' (1) indicates to accept and process multicast TST.
A value of 'disabled' (2) indicates not to process the multicast TST.
"
DEFVAL { disabled }
::= { fsMIY1731MepEntry 40 }
fsMIY1731MepTransmitTstPatternType OBJECT-TYPE
SYNTAX FsY1731TestTlvPatternType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of the pattern to be included in the test TLV of TST
frame.
"
DEFVAL { patternPRBSWithoutCRC32 }
::= { fsMIY1731MepEntry 41 }
fsMIY1731MepTransmitTstVariableBytes OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates a varying number of data bytes to send in the TST.
True indicates that TSTs are to be send with varying bytes of data and
False indicates that TST(s) are send with same number of bytes of data.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 42 }
fsMIY1731MepTransmitTstPatternSize OBJECT-TYPE
SYNTAX Unsigned32(0..8969)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the size of the pattern to be included in the Test TLV of
the TST message.
Maximum frame size supported by ECFM is 9K,
following is the calculation for the maximum size of test-tlv supported
by ECFM :
18 bytes - Ethernet Header
4 bytes - CFM Header
4 bytes - Transaction-Id
1 byte - End Tlv
4 bytes - Data Tlv Over Head
9000 - 31 = 8969 bytes
"
DEFVAL { 33 }
::= { fsMIY1731MepEntry 43 }
fsMIY1731MepTransmitTstDestType OBJECT-TYPE
SYNTAX FsY1731DestType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the TST Destination Types (unicast,MEPID,Multicast)
"
::= { fsMIY1731MepEntry 44 }
fsMIY1731MepTransmitTstDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitTstDestType is 'Unicast'
"
::= { fsMIY1731MepEntry 45 }
fsMIY1731MepTransmitTstDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maintenance Entity Group End Point Identifier of another
MEP in the same Maintenance Association to which the TST is
to be sent.
This address will be used if the value of the column
fsMIY1731MepTransmitTstDestType is for 'MepID'.
"
::= { fsMIY1731MepEntry 46 }
fsMIY1731MepTransmitTstSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sequence number to be sent in the TST message.
"
::= { fsMIY1731MepEntry 47 }
fsMIY1731MepTransmitTstPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted TST frame.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 48 }
fsMIY1731MepTransmitTstDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted TST frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 49 }
fsMIY1731MepTransmitTstMessages OBJECT-TYPE
SYNTAX Integer32(0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of Test messages to be transmitted.
"
::= { fsMIY1731MepEntry 50 }
fsMIY1731MepTransmitTstStatus OBJECT-TYPE
SYNTAX FsY1731TransmitStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to 'start' to initiate TST transmission
and 'stop' to stop TST transmission.
'ready' and 'notReady' indicates whether TST can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
"
DEFVAL { ready }
::= { fsMIY1731MepEntry 51 }
fsMIY1731MepTransmitTstResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- true The Test Message(s) will be
(or has been) sent.
- false The Test Message(s) will not
be sent.
"
DEFVAL { true }
::= { fsMIY1731MepEntry 52 }
fsMIY1731MepTransmitTstInterval OBJECT-TYPE
SYNTAX Unsigned32(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between two successive TST transmissions to be used by the
MEP.
fsMIY1731MepTransmitTstIntervalType is used as units for this object.
Ranges applicable for allowed units are:
10-1000 for microseconds
1-1000 for millseconds
1-600 for seconds
"
DEFVAL { 1 }
::= { fsMIY1731MepEntry 53 }
fsMIY1731MepTransmitTstIntervalType OBJECT-TYPE
SYNTAX FsY1731TimeIntervalType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Units of fsMIY1731MepTransmitTstInterval to be used by the
MEP for TSTs transmission.
"
DEFVAL { seconds }
::= { fsMIY1731MepEntry 54 }
fsMIY1731MepTransmitTstDeadline OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a timeout(in seconds), before test exits. Test exits, if
configured number of messages are sent before timeout.
"
::= { fsMIY1731MepEntry 55 }
fsMIY1731MepBitErroredTstIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of bit-errored TST messages received.
Reception of invalid TST message is considered as bit-errored TST
messages.
"
::= { fsMIY1731MepEntry 56 }
fsMIY1731MepValidTstIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of valid TST messages received.
"
::= { fsMIY1731MepEntry 57 }
fsMIY1731MepTstOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of TST messages transmitted.
"
::= { fsMIY1731MepEntry 58 }
fsMIY1731MepTransmitLmmStatus OBJECT-TYPE
SYNTAX FsY1731TransmitStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to 'start' to initiate LM transmission
and 'stop' to stop LM transmission.
'ready' and 'notReady' indicates whether LM can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
"
DEFVAL { ready }
::= { fsMIY1731MepEntry 59 }
fsMIY1731MepTransmitLmmResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- true The Loss measurement Message (LMM) will be (or has been) sent.
- false The Loss measurement Message (LMM) will not be sent.
"
DEFVAL { true }
::= { fsMIY1731MepEntry 60 }
fsMIY1731MepTransmitLmmInterval OBJECT-TYPE
SYNTAX FsY1731LmmInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between two successive LMM transmissions to be used by the MEP.
"
DEFVAL { interval100ms }
::= { fsMIY1731MepEntry 61 }
fsMIY1731MepTransmitLmmDeadline OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a timeout, in seconds, before loss measurement exits.
Loss Measurement exits, if configured number of messages are sent
before timeout.
"
::= { fsMIY1731MepEntry 62 }
fsMIY1731MepTransmitLmmDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 63 }
fsMIY1731MepTransmitLmmPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 64 }
fsMIY1731MepTransmitLmmDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for LMM.
"
::= { fsMIY1731MepEntry 65 }
fsMIY1731MepTransmitLmmDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
fsMIY1731MepTransmitLmmDestIsMepId is 'true'.
"
::= { fsMIY1731MepEntry 66 }
fsMIY1731MepTransmitLmmDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True indicates that MEPID of the target MEP is used for
LM frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Frame Loss Measurement transmission.
"
::= { fsMIY1731MepEntry 67 }
fsMIY1731MepTransmitLmmMessages OBJECT-TYPE
SYNTAX Integer32(0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of LMM messages to be transmitted.
"
::= { fsMIY1731MepEntry 68 }
fsMIY1731MepTxFCf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of in-profile data frames transmitted towards its
peer MEP transmitted in the last CCM or LMM.
"
::= { fsMIY1731MepEntry 69 }
fsMIY1731MepRxFCb OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of in-profile data frames received from its peer MEP at the
time of receiving the last CCM frame.
"
::= { fsMIY1731MepEntry 70 }
fsMIY1731MepTxFCb OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of fsMIY1731MepTxFCf field in the last CCM or LMR frame
received from its peer MEP.
"
::= { fsMIY1731MepEntry 71 }
fsMIY1731MepNearEndFrameLossThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold value for the near-end frame loss.
Notification is sent to Management Application if calculated near-end
frame loss exceeds configured threshold.
"
::= { fsMIY1731MepEntry 72 }
fsMIY1731MepFarEndFrameLossThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold value for the far-end frame loss.
Notification is sent to Management Application if calculated far-end
frame loss exceeds configured threshold.
"
::= { fsMIY1731MepEntry 73 }
fsMIY1731MepTransmitDmStatus OBJECT-TYPE
SYNTAX FsY1731TransmitStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to 'start' to initiate 1DM or DMM transmission
and 'stop' to stop 1DM or DMM transmission.
'ready' and 'notReady' indicates whether 1DM or DMM can be initiated
or not.
Note: User can not set to 'ready' or 'notReady'.
"
DEFVAL { ready }
::= { fsMIY1731MepEntry 74 }
fsMIY1731MepTransmitDmResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false The Delay measurement Message (1DM or DMM) will not be sent.
"
DEFVAL { true }
::= { fsMIY1731MepEntry 75 }
fsMIY1731MepTransmitDmType OBJECT-TYPE
SYNTAX INTEGER { oneWay(1), twoWay(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of delay measurement to be initiated:
- oneWay(1) Measurement (by 1DM) is calculated at destination end.
- twoWay(2) Measurement (by DMM-DMR) is calculated at initiation end.
"
DEFVAL { 2 }
::= { fsMIY1731MepEntry 76 }
fsMIY1731MepTransmitDmInterval OBJECT-TYPE
SYNTAX TimeInterval(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between two successive DM messages
(1DM or DMM) transmissions to be used by the MEP.
"
DEFVAL { 100 }
::= { fsMIY1731MepEntry 77 }
fsMIY1731MepTransmitDmMessages OBJECT-TYPE
SYNTAX Integer32(0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of DM (1DM or DMM) messages to be transmitted.
"
::= { fsMIY1731MepEntry 78 }
fsMIY1731MepTransmitDmmDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted DMM frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 79 }
fsMIY1731MepTransmit1DmDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 80 }
fsMIY1731MepTransmitDmmPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted DMM frame.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 81 }
fsMIY1731MepTransmit1DmPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 82 }
fsMIY1731MepTransmitDmDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for 1DM or DMM.
"
::= { fsMIY1731MepEntry 83 }
fsMIY1731MepTransmitDmDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
fsMIY1731MepTransmitDmDestIsMepId is 'true'.
"
::= { fsMIY1731MepEntry 84 }
fsMIY1731MepTransmitDmDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True indicates that MEPID of the target MEP is used for
Delay frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Delay frame transmission.
"
::= { fsMIY1731MepEntry 85 }
fsMIY1731MepTransmitDmDeadline OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a timeout, in seconds, before Delay Measurement operation exits.
Delay Measurement operation exits, if configured number of messages are
sent before timeout.
"
::= { fsMIY1731MepEntry 86 }
fsMIY1731MepDmrOptionalFields OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether to include optional fields in the DMR Frame or not.
True indicates optional fields are to be included and False indicates
optional fields are not included.
Optional fields are included to include the processing time at peer MEP.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 87 }
fsMIY1731Mep1DmRecvCapability OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of 1DM Frame reception. This enables
or disables the capability of MEP to process the 1DM Frames.
A value of 'enabled' (1) indicates to accept and process 1DM Frames.
A value of 'disabled' (2) indicates not to process the 1DM Frames.
"
DEFVAL { enabled }
::= { fsMIY1731MepEntry 88 }
fsMIY1731MepFrameDelayThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold (in microseconds) for the Frame delay.
Notification is sent to Management application if calculated frame delay
exceeds configured threshold.
"
DEFVAL { 200 }
::= { fsMIY1731MepEntry 89 }
fsMIY1731MepAisCapability OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of AIS capability.This enables or disables
transmission of AIS frames.
A value of 'enabled' (1) indicates AIS frames will be transmitted when
MEP is in AIS/LCK condition determined by fsMIY1731MepAisCondition and
fsMIY1731MepLckCondition objects respectively or dot1agCfmMepDefects
shows any defect.
A value of 'disabled' (2) indicates AIS frames will not be transmitted.
If fsMIY1731MepAisPeriod is provided then it will be enabled for that
period only.
fsMIY1731MepAisClientMacAddress in needs to be configured incase user
needs to send AIS frame(s) as unicast or fsMIY1731MegClientMEGLevel
in case of AIS frames needs to be sent as multicast in prior to
enabling of fsMIY1731MepAisCapability.
"
DEFVAL { disabled }
::= { fsMIY1731MepEntry 90 }
fsMIY1731MepAisCondition OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates MEP is in AIS condition.
AIS condition occurs when it receives an AIS frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 91 }
fsMIY1731MepAisInterval OBJECT-TYPE
SYNTAX FsY1731AisLckInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between two successive AIS transmissions.
"
DEFVAL { interval1s }
::= { fsMIY1731MepEntry 92 }
fsMIY1731MepAisPeriod OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability)
is enabled.
"
::= { fsMIY1731MepEntry 93 }
fsMIY1731MepAisPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Mib object is used for configuring AIS Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority value to be used in the VLAN tag,
if present in the transmitted AIS frame. The default value is 7.
For MPLS-TP (LSP/PW):
This indicates the 3-bit EXP value that needs to be used in the
MPLS header of AIS frame.
The default EXP value is 7. The range is (0..7).
Note: Diff-serv based EXP field mapping is not supported.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 94 }
fsMIY1731MepAisDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted AIS frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 95 }
fsMIY1731MepAisDestIsMulticast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to indicate the type of AIS transmission,
unicast or multicast.
'true' indicates that AIS(s) are to be transmitted as multicast,
'false' indicates that AIS(s) are to be transmitted as unicast.
"
::= { fsMIY1731MepEntry 96 }
fsMIY1731MepAisClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" A unicast destination MAC address of the Client MEP to which AIS frame
is to send.
This object is not supported on MEPs created over MPLS-TP networks, as
these networks do not operate based on MAC Address.
"
::= { fsMIY1731MepEntry 97 }
fsMIY1731MepLckDestIsMulticast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to indicate the type of LCK transmission,
unicast or multicast.
'true' indicates that LCK signals are to be transmitted as multicast,
'false' indicates that LCK signals are to be transmitted as unicast.
"
::= { fsMIY1731MepEntry 98 }
fsMIY1731MepLckClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" A unicast destination MAC address of the Client MEP to which AIS frame
is to send.
"
::= { fsMIY1731MepEntry 99 }
fsMIY1731MepLckCondition OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if MEP is in LCK condition.
LCK condition occurs when it receives a LCK frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 100 }
fsMIY1731MepLckInterval OBJECT-TYPE
SYNTAX FsY1731AisLckInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between two successive LCK transmissions to be
used by the MEP.
"
DEFVAL { interval1s }
::= { fsMIY1731MepEntry 101 }
fsMIY1731MepLckPeriod OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time period (in seconds) for which LCK messages are to be
transmitted.
"
::= { fsMIY1731MepEntry 102 }
fsMIY1731MepLckPriority OBJECT-TYPE
SYNTAX Unsigned32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LCK frame.
"
DEFVAL { 7 }
::= { fsMIY1731MepEntry 103 }
fsMIY1731MepLckDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LCK frame.
"
DEFVAL { false }
::= { fsMIY1731MepEntry 104 }
fsMIY1731MepLckDelay OBJECT-TYPE
SYNTAX TimeInterval(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When a MEP is set as locked (for out-of-service operations), data traffic through
that MEP will be blocked after this delay.
"
DEFVAL { 1 }
::= { fsMIY1731MepEntry 105 }
fsMIY1731MepDefectConditions OBJECT-TYPE
SYNTAX FsY1731MepDefects
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A vector of Boolean indicates the defect conditions.
"
::= { fsMIY1731MepEntry 106 }
fsMIY1731MepUnicastCcmMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unicast MacAddress used for performance monitoring through Continuity
Check Messages.
Continuity Check Messages are to be transmitted as multicast frames
incase this object contains NULL value.
This object is not supported on MEPs created over MPLS-TP networks, as
these networks do not operate based on MAC Address.
"
::= { fsMIY1731MepEntry 107 }
fsMIY1731MepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of MEP row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible values are row status active and
row status not active.
"
::= { fsMIY1731MepEntry 108 }
fsMIY1731MepRxFCf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of fsMIY1731MepRxFCf field is the value of in-profile data frames
received from its peer MEP.
"
::= { fsMIY1731MepEntry 109 }
fsMIY1731Mep1DmTransInterval OBJECT-TYPE
SYNTAX TimeInterval(0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval (in 0.01 seconds) between two successive One-way DM Transactions
and is used to carry out Delay Variation Measurement for
1DM transactions.
The value '0' indicates One-way Delay Variation measurement cannot take place.
The value should be greater than the DM Interval.
"
DEFVAL { 0 }
::= { fsMIY1731MepEntry 110 }
fsMIY1731MepTransmitThDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Throughput Measurement.
"
::= { fsMIY1731MepEntry 111 }
fsMIY1731MepTransmitThDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
fsMIY1731MepTransmitThDestIsMepId is 'true'.
"
::= { fsMIY1731MepEntry 112 }
fsMIY1731MepTransmitThDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True indicates that MEPID of the target MEP is used for
Throughput Measurement.
False indicates that unicast destination MAC address of the
target MEP is used for Throughput Measurement.
"
::= { fsMIY1731MepEntry 113 }
fsMIY1731MepTransmitThMessages OBJECT-TYPE
SYNTAX Integer32(0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of Throughput messages (LBM / TST) to be transmitted.
"
::= { fsMIY1731MepEntry 114 }
fsMIY1731MepTransmitThPps OBJECT-TYPE
SYNTAX Unsigned32 (1..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of Throughput messages being transmitted in a second.
It is used to calculate the time interval between two successive
message transmission. It's default value is 100 packets per sec.
"
DEFVAL {100}
::= { fsMIY1731MepEntry 115 }
fsMIY1731MepTransmitThDeadline OBJECT-TYPE
SYNTAX Unsigned32(0..172800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a timeout, in seconds, before Throughput Measurement operation exits.
Throughput Measurement operation exits, if configured number of messages are
sent before timeout.
"
::= { fsMIY1731MepEntry 116 }
fsMIY1731MepTransmitThType OBJECT-TYPE
SYNTAX INTEGER { oneWay(1), twoWay(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of Throughput measurement to be initiated:
- oneWay(1) Measurement (by TST) is calculated at initiation end with
the use of VSM PDUs.
- twoWay(2) Measurement (by LBM-LBR) is calculated at initiation end.
"
DEFVAL { 2 }
::= { fsMIY1731MepEntry 117 }
fsMIY1731MepTransmitThStatus OBJECT-TYPE
SYNTAX FsY1731TransmitStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to 'start' to initiate Throughput transaction
and 'stop' to stop Throughput transaction.
'ready' and 'notReady' indicates whether Throughput transaction can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
"
DEFVAL { ready }
::= { fsMIY1731MepEntry 118 }
fsMIY1731MepTransmitThFrameSize OBJECT-TYPE
SYNTAX Unsigned32 (64..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the initial total packet size configured by the user
including the Test TLV of the (LBM / TST) message.
Maximum frame size supported by ECFM is 9K,
following is the calculation for the maximum size of test-tlv supported
by ECFM :
18 bytes - Ethernet Header
4 bytes - CFM Header
4 bytes - Transaction-Id
1 byte - End Tlv
4 bytes - Data Tlv Over Head
9000 - 31 = 8969 bytes
As Frame Size value is varied to calculate the maximum Throughput
this value represents the unveriifed Frame Size with which last
throughput value calculated or to be calculated.
"
DEFVAL { 1500 }
::= { fsMIY1731MepEntry 119 }
fsMIY1731MepTransmitThBurstMessages OBJECT-TYPE
SYNTAX Integer32(0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of Throughput messages (LBM / TST) to be transmitted in a
burst.
"
DEFVAL { 10 }
::= { fsMIY1731MepEntry 120 }
fsMIY1731MepTransmitThBurstDeadline OBJECT-TYPE
SYNTAX Unsigned32(0..172800000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the time period, in milliseconds, for which a burst exists (LB Burst
/ TST Burst ).
"
DEFVAL { 100 }
::= { fsMIY1731MepEntry 121 }
fsMIY1731MepTransmitThBurstType OBJECT-TYPE
SYNTAX INTEGER { burstMessages(1), burstDeadline(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Throughput Burst can be initiated as:
- burstMessages(1) Number of Throughput messages (LBM / TST) to be
transmitted in a burst.
- burstDeadline(2) Timeout, in seconds, before single Throughput Burst
(LB Burst / TST Burst ) exits.
"
DEFVAL { 2 }
::= { fsMIY1731MepEntry 122 }
fsMIY1731MepTransmitThTestPatternType OBJECT-TYPE
SYNTAX FsY1731TestTlvPatternType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of the pattern to be included in the test TLV of
Throughput frame(LBM/TST PDU) .
TestTlvPattern Types can be:
patternNullSignalWithoutCRC32(0) Pattern contains null signal without
any CRC.
patternNullSignalWithCRC32(1) Pattern contains null signal with CRC.
patternPRBSWithoutCRC32(2) Pattern contains pseudo random bit
sequence 2^-31-1 without any CRC.
patternPRBSWithCRC32(3) Pattern contains pseudo random bit
sequence 2^-31-1 with CRC.
"
DEFVAL { patternNullSignalWithoutCRC32 }
::= { fsMIY1731MepEntry 123 }
fsMIY1731MepThVerifiedBps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the verified throughput value.
"
::= { fsMIY1731MepEntry 124 }
fsMIY1731MepThUnVerifiedBps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the throughput value under verification. This is the
throughput value for which verification is still to be performed.
"
::= { fsMIY1731MepEntry 125 }
fsMIY1731MepTransmitLbmMode OBJECT-TYPE
SYNTAX INTEGER { burst(1), requestResponse(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LBMs can be initiated as:
- burst(1) Lbms are initiated without waiting for the reception of
LBR PDUs.
- requestResponse(2) After initiating the Lbm wait for the
reception of Lbr or the timeout before sending the next Lbm.
"
DEFVAL { 2 }
::= { fsMIY1731MepEntry 126 }
fsMIY1731MepLbmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LBM messages transmitted.
"
::= { fsMIY1731MepEntry 127 }
fsMIY1731MepTransmitLbmTimeout OBJECT-TYPE
SYNTAX TimeInterval(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time for all the replies (LBR) of LBMs to be received by
the MEP.No reply (LBR) would be entertained thereafter (timeout).
"
DEFVAL { 500 }
::= { fsMIY1731MepEntry 128 }
fsMIY1731MepTstCapability OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of Tst capability.
This enables or disables capability of MEP to initiate and process
Tst operation.
A value of 'enabled' (1) indicates to initiate as well as process TST.
A value of 'disabled' (2) indicates not to initiate as well as process
the TST.
"
DEFVAL { enabled }
::= { fsMIY1731MepEntry 129 }
fsMIY1731MepTransmitThResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of Th transaction,
- true The TH Message(s) will be
(or has been) sent.
- false The TH Message(s) will not
be sent due to some internal problem.
"
DEFVAL { true }
::= { fsMIY1731MepEntry 130 }
fsMIY1731MepThVerifiedFrameSize OBJECT-TYPE
SYNTAX Unsigned32 (0..9000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Frame Size with which verified Throughput is achieved
"
DEFVAL { 0 }
::= { fsMIY1731MepEntry 131 }
fsMIY1731MepAisOffload OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative MEP AIS Offloading status.
When value 'enabled' (1) is set, the AIS Offloading is enabled for the
MEP. When value 'disabled' (2) is set, the AIS Offloading will be
disabled for the MEP. By Default AIS Offloading is disabled.
"
DEFVAL { disabled }
::= { fsMIY1731MepEntry 132 }
fsMIY1731MepLbmTTL OBJECT-TYPE
SYNTAX Unsigned32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time-to-live(TTL) value to be used in the
MPLS outer label header when loopback connectivity verification (ping)
or diagnostic tests has to be performed to a MEP/MIP in the MPLS-TP
network.
By default TTL value will be 255.
If the user sets a particular value, then that TTL will be set and
carried in LBM packets.
When performing loopback connectivity verification (ping) or diagnostic
tests to a MIP, this object MUST be set to an appropriate TTL value
needed to reach the MIP.
For MIP, this must be configured in conjunction with
fsMIY1731MepTransmitLbmDestType as mipid(3), fsMIY1731MepLbmIcc,
fsMIY1731MepLbmNodeId, fsMIY1731MepLbmIfNum.
For MEP, this must be configured in conjunction with
fsMIY1731MepTransmitLbmDestType as mepid(1) and
fsMIY1731MepTransmitLbmDestMepId.
"
DEFVAL { 255 }
::= { fsMIY1731MepEntry 133 }
fsMIY1731MepLbmIcc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC
based MPLS-TP network for which loopback connectivity verification
(ping) or diagnostic tests has to be initiated.
The ICC code consists of 1-6 characters with alphabetic
or numberic characters.
This must be configured in conjunction with
fsMIY1731MepTransmitLbmDestType as mipid(3),
fsMIY1731MepLbmNodeId, fsMIY1731MepLbmIfNum. fsMIY1731MepLbmTTL.
This object must be set ONLY to perform loopback connectivity
verification or diagnostic tests to a MIP (and not for remote MEP) in
the MPLS-TP network.
"
::= { fsMIY1731MepEntry 134 }
fsMIY1731MepLbmNodeId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Node Id of the specific MIP node in MPLS-TP
network for which loopback connectivity verification(ping) or diagnostic
tests has to be initiated.
This must be interpreted in conjunction with the fsMIY1731MepLbmIcc
object.
This must be configured in conjunction with
fsMIY1731MepTransmitLbmDestType as mipid(3),
fsMIY1731MepLbmIcc, fsMIY1731MepLbmIfNum. fsMIY1731MepLbmTTL.
This object must be set ONLY to perform loopback connectivity
verification or diagnostic tests to a MIP (and not for remote MEP) in
the MPLS-TP network.
"
::= { fsMIY1731MepEntry 135 }
fsMIY1731MepLbmIfNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Interface Number of the specific MIP node in
MPLS-TP network for which loopback connectivity verification(ping) or
diagnostic tests has to be initiated.
Per Interface MIP is identified by configuring the non-zero If-Num
of the Access Point towards the server layer.
Per Node MIP is identified by configuring a value of zero to this
object.
This must be interpreted in conjunction with the fsMIY1731MepLbmIcc
and fsMIY1731MepLbmNodeId objects.
This must be configured in conjunction with
fsMIY1731MepTransmitLbmDestType as mipid(3),
fsMIY1731MepLbmIcc, fsMIY1731MepLbmNodeId. fsMIY1731MepLbmTTL.
This object must be set ONLY to perform loopback connectivity
verification or diagnostic tests to a MIP (and not for remote MEP) in
the MPLS-TP network.
"
::= { fsMIY1731MepEntry 136 }
-- ----------------------------------------------------------------------------
-- The MEP Table - End
-- ----------------------------------------------------------------------------
-- ******************************************************************
-- The Error Log Table
-- ******************************************************************
fsMIY1731ErrorLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731ErrorLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Error Log table.
Size of this table is defined by the object fsMIY1731ErrorLogSize.
If the addition of an error entry would exceed the
resources allocated to table, then the oldest entries in the table are
deleted until sufficient resources are available to hold the new
error entry.
Each row in the table represents error or defect
detected by a specific MEP.
This table uses three indices. The first four are the indices of MEP
table the reason being that a error or defect can only
be detected by MEP.
SNMP SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
"
::= { fsMIY1731Context 5 }
fsMIY1731ErrorLogEntry OBJECT-TYPE
SYNTAX FsMIY1731ErrorLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Error Log Table."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731ErrorLogSeqNumber
}
::= { fsMIY1731ErrorLogTable 1 }
FsMIY1731ErrorLogEntry ::= SEQUENCE {
fsMIY1731ErrorLogSeqNumber Unsigned32,
fsMIY1731ErrorLogTimeStamp TimeStamp,
fsMIY1731ErrorLogType FsY1731ErrorLogType,
fsMIY1731ErrorLogRMepIdentifier Dot1agCfmMepIdOrZero
}
fsMIY1731ErrorLogSeqNumber OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally maintained sequence number of Error Log Entries"
::= { fsMIY1731ErrorLogEntry 1 }
fsMIY1731ErrorLogTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the time at which error or defect is
detected by a MEP.
"
::= { fsMIY1731ErrorLogEntry 2 }
fsMIY1731ErrorLogType OBJECT-TYPE
SYNTAX FsY1731ErrorLogType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of error or defect detected by MEP.
Type of errors/defects are:
bDefRdiCondition,
bDefLossOfContinuity,
bDefUnexpectedPeriod,
bDefUnexpectedMep,
bDefMisMerge,
bDefUnexpectedMegLevel,
bDefLocalLinkFailure,
bDefInternalHWFailure,
bDefInternalSWFailure,
bDefAisCondition,
bDefLckCondition
"
::= { fsMIY1731ErrorLogEntry 3 }
fsMIY1731ErrorLogRMepIdentifier OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the specific remote MEP due to which defect is detected.
Zero indicates that no remote MEP contributes for the occurence of
defect.
"
::= { fsMIY1731ErrorLogEntry 4 }
-- ******************************************************************
-- The Linktrace Reply Table
-- ******************************************************************
fsMIY1731LtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731LtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains a list of
Linktrace replies received by a specific MEP in response to
a linktrace message.
SNMP SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
"
::= { fsMIY1731Context 6 }
fsMIY1731LtrEntry OBJECT-TYPE
SYNTAX FsMIY1731LtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Linktrace Reply table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731LtrSeqNumber,
fsMIY1731LtrReceiveOrder
}
::= { fsMIY1731LtrTable 1 }
FsMIY1731LtrEntry ::= SEQUENCE {
fsMIY1731LtrSeqNumber Unsigned32,
fsMIY1731LtrReceiveOrder Unsigned32,
fsMIY1731LtrReceiveTime TimeInterval
}
fsMIY1731LtrSeqNumber OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Transaction identifier/Sequence number returned by a previous
transmit linktrace message command, indicating which LTM's
response is going to be returned.
"
::= { fsMIY1731LtrEntry 1}
fsMIY1731LtrReceiveOrder OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value. fsMIY1731LtrReceiveOrder
are assigned sequentially from 1, in the order that the
Linktrace Initiator received the LTRs.
"
::= { fsMIY1731LtrEntry 2 }
fsMIY1731LtrReceiveTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time taken to receive a LTR in response to a transmitted
LTM.
"
::= { fsMIY1731LtrEntry 3}
-- ******************************************************************
-- The Loopback Message Table
-- ******************************************************************
fsMIY1731LbmTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731LbmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains information of
Loopback messages sent by a specific MEP.
SNMP SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
"
::= { fsMIY1731Context 7 }
fsMIY1731LbmEntry OBJECT-TYPE
SYNTAX FsMIY1731LbmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Loopback Message table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731LbmTransId,
fsMIY1731LbmSeqNumber
}
::= { fsMIY1731LbmTable 1 }
FsMIY1731LbmEntry ::= SEQUENCE {
fsMIY1731LbmTransId Unsigned32,
fsMIY1731LbmSeqNumber Unsigned32,
fsMIY1731LbmBytesSent Unsigned32,
fsMIY1731LbmTargetMacAddress MacAddress,
fsMIY1731LbmUnexptedLbrIn Unsigned32,
fsMIY1731LbmDuplicatedLbrIn Unsigned32,
fsMIY1731LbmNumOfResponders Unsigned32,
fsMIY1731LbmDestType FsY1731DestType,
fsMIY1731LbmDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731LbmIcc DisplayString,
fsMIY1731LbmNodeId Unsigned32,
fsMIY1731LbmIfNum Unsigned32,
fsMIY1731LbmTTL Unsigned32
}
fsMIY1731LbmTransId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Transaction Identifier identifies a loopback or ping (LBM)transaction.
"
::= { fsMIY1731LbmEntry 1}
fsMIY1731LbmSeqNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sequence number returned by a previous transmit loopback message,
indicating which LBM's response is going to be returned.
"
::= { fsMIY1731LbmEntry 2}
fsMIY1731LbmBytesSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size (in bytes) of the LBM transmitted.
"
::= { fsMIY1731LbmEntry 3 }
fsMIY1731LbmTargetMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac Address of the target MP (MEP or MIP) to which LBM has been sent.
For multicast LBM this object should not be considered.
"
::= { fsMIY1731LbmEntry 4}
fsMIY1731LbmUnexptedLbrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of unexpected Lbrs Received.
"
::= { fsMIY1731LbmEntry 5 }
fsMIY1731LbmDuplicatedLbrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Duplicated Lbrs Received.
"
::= { fsMIY1731LbmEntry 6 }
fsMIY1731LbmNumOfResponders OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Responders which have sent the reply (LBR)
for the initiated LBM.
"
::= { fsMIY1731LbmEntry 7 }
fsMIY1731LbmDestType OBJECT-TYPE
SYNTAX FsY1731DestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type (i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network)) of the
destination for which LBM was sent.
"
::= { fsMIY1731LbmEntry 8 }
fsMIY1731LbmDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Target MEP ID to which LBM was sent.
"
::= { fsMIY1731LbmEntry 9 }
fsMIY1731LbmIcc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the ICC of the MIP node in ICC
based MPLS-TP network for which LBM was sent.
"
::= { fsMIY1731LbmEntry 10 }
fsMIY1731LbmNodeId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Node Id of the specific MIP node in MPLS-TP
network for which LBM was sent.
"
::= { fsMIY1731LbmEntry 11 }
fsMIY1731LbmIfNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Interface Number of the specific MIP node in
MPLS-TP network for which LBM was sent.
"
::= { fsMIY1731LbmEntry 12 }
fsMIY1731LbmTTL OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time-to-live(TTL) value used in the
MPLS outer label header in the LBM which was sent.
"
::= { fsMIY1731LbmEntry 13 }
-- ******************************************************************
-- The Loopback Reply Table
-- ******************************************************************
fsMIY1731LbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731LbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains a list of
Loopback replies received by a specific MEP in response to
a loopback message.
Size of this table is defined by the object fsMIY1731LbrCacheSize.
If the addition of a loopback reply entry would exceed the
resources allocated to table, then the oldest entries in the table are
deleted until sufficient resources are available to hold the new
loopback reply entry.
SNMP SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
"
::= { fsMIY1731Context 8 }
fsMIY1731LbrEntry OBJECT-TYPE
SYNTAX FsMIY1731LbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Loopback Reply table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731LbmTransId,
fsMIY1731LbrSeqNumber,
fsMIY1731LbrReceiveOrder
}
::= { fsMIY1731LbrTable 1 }
FsMIY1731LbrEntry ::= SEQUENCE {
fsMIY1731LbrSeqNumber Unsigned32,
fsMIY1731LbrReceiveOrder Unsigned32,
fsMIY1731LbrResponderMacAddress MacAddress,
fsMIY1731LbrReceiveTime TimeInterval,
fsMIY1731LbrErrorType FsY1731LbrErrType,
fsMIY1731LbrDestType FsY1731DestType,
fsMIY1731LbrDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731LbrICC DisplayString,
fsMIY1731LbrNodeId Unsigned32,
fsMIY1731LbrIfNum Unsigned32
}
fsMIY1731LbrSeqNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sequence number received in the Loopback reply.
"
::= { fsMIY1731LbrEntry 1}
fsMIY1731LbrReceiveOrder OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Order in which LBRs are received for a same Sequence Number field
value.
"
::= { fsMIY1731LbrEntry 2 }
fsMIY1731LbrResponderMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mac Address of the MP which has sent the response for the
LBM.
"
::= { fsMIY1731LbrEntry 3}
fsMIY1731LbrReceiveTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time taken to receive a LBR in response to the
transmitted LBM.
"
::= { fsMIY1731LbrEntry 4}
fsMIY1731LbrErrorType OBJECT-TYPE
SYNTAX FsY1731LbrErrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that received loobback reply is errored one.
bit 0 indicates bad MSDU (when data in the LBR does not match what was
sent in the LBM)
bit 1 indicates bit errored LBR (LBR is with bit errors)
"
::= { fsMIY1731LbrEntry 5 }
fsMIY1731LbrDestType OBJECT-TYPE
SYNTAX FsY1731DestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Type ((i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network)) of the
destination from which LBR was received.
"
::= { fsMIY1731LbrEntry 6 }
fsMIY1731LbrDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MEP which has sent the response for the LBM.
"
::= { fsMIY1731LbrEntry 7 }
fsMIY1731LbrICC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the ICC of the MIP node in ICC
based MPLS-TP network from which LBR was received.
"
::= { fsMIY1731LbrEntry 8 }
fsMIY1731LbrNodeId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Node Id of the specific MIP node in MPLS-TP
network from which LBR was received.
"
::= { fsMIY1731LbrEntry 9 }
fsMIY1731LbrIfNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Interface Number of the specific MIP node in
MPLS-TP network from which LBR was received.
"
::= { fsMIY1731LbrEntry 10 }
-- ******************************************************************
-- The Loopback Statistics Table
-- ******************************************************************
fsMIY1731LbStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731LbStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains output of loopback
or ping transaction.
Output includes number of replies recieved, time taken for a reply to
come.
SNMP SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
"
::= { fsMIY1731Context 9 }
fsMIY1731LbStatsEntry OBJECT-TYPE
SYNTAX FsMIY1731LbStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Loopback Statistics table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731LbmTransId
}
::= { fsMIY1731LbStatsTable 1 }
FsMIY1731LbStatsEntry ::= SEQUENCE {
fsMIY1731LbStatsLbmOut Unsigned32,
fsMIY1731LbStatsLbrIn Unsigned32,
fsMIY1731LbStatsLbrTimeAverage TimeInterval,
fsMIY1731LbStatsLbrTimeMin TimeInterval,
fsMIY1731LbStatsLbrTimeMax TimeInterval,
fsMIY1731LbStatsTotalResponders Unsigned32,
fsMIY1731LbStatsAvgLbrsPerResponder Unsigned32
}
fsMIY1731LbStatsLbmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of LBMs sent in a loopback or ping transaction.
"
::= { fsMIY1731LbStatsEntry 1}
fsMIY1731LbStatsLbrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of replies (LBR) received in a loopback or ping transaction.
"
::= { fsMIY1731LbStatsEntry 2 }
fsMIY1731LbStatsLbrTimeAverage OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average time taken to receive the replies (LBR) for the current
loopback or ping transaction.
"
::= { fsMIY1731LbStatsEntry 3 }
fsMIY1731LbStatsLbrTimeMin OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum time taken to receive the replies (LBR) for the
current loopback or ping transaction.
"
::= { fsMIY1731LbStatsEntry 4 }
fsMIY1731LbStatsLbrTimeMax OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum time taken to receive the replies (LBR) for the current
loopback or ping transaction.
"
::= { fsMIY1731LbStatsEntry 5 }
fsMIY1731LbStatsTotalResponders OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Number of Responders which have sent the reply
(LBR) for the initiated LBM.
"
::= { fsMIY1731LbStatsEntry 6 }
fsMIY1731LbStatsAvgLbrsPerResponder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Number of LBR(s) received per Responder.
"
::= { fsMIY1731LbStatsEntry 7 }
-- ******************************************************************
-- The Frame Delay Buffer Table
-- ******************************************************************
fsMIY1731FdTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731FdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains a list of
information about the Frame Delay measured at various times by a
MEP.
Size of this table is defined by the object
fsMIY1731FrameDelayBufferSize. If the addition of a frame delay entry
would exceed the resources allocated to table, then the oldest entries
in the table are deleted until sufficient resources are available to
hold the new frame delay entry.
Delay Measured can be of one-way or two-way.
"
::= { fsMIY1731Context 10 }
fsMIY1731FdEntry OBJECT-TYPE
SYNTAX FsMIY1731FdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame delay buffer table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731FdTransId,
fsMIY1731FdSeqNumber
}
::= { fsMIY1731FdTable 1 }
FsMIY1731FdEntry ::= SEQUENCE {
fsMIY1731FdTransId Unsigned32,
fsMIY1731FdSeqNumber Unsigned32,
fsMIY1731FdTxTimeStampf FsY1731TimeRepresentation,
fsMIY1731FdMeasurementTimeStamp TimeStamp,
fsMIY1731FdPeerMepMacAddress MacAddress,
fsMIY1731FdIfIndex InterfaceIndex,
fsMIY1731FdDelayValue FsY1731TimeRepresentation,
fsMIY1731FdIFDV FsY1731TimeRepresentation,
fsMIY1731FdFDV FsY1731TimeRepresentation,
fsMIY1731FdMeasurementType INTEGER
}
fsMIY1731FdTransId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a delay measurement transaction.
"
::= { fsMIY1731FdEntry 1 }
fsMIY1731FdSeqNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally maintained sequence number of FD Entries"
::= { fsMIY1731FdEntry 2}
fsMIY1731FdTxTimeStampf OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxTimeStampf value sent in a Delay measurement message (DMM).
or received in 1DM frame.
"
::= { fsMIY1731FdEntry 3 }
fsMIY1731FdMeasurementTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time at which measurement takes place.
"
::= { fsMIY1731FdEntry 4}
fsMIY1731FdPeerMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the Mac Address of the peer MEP to which DM message(s)
is sent.
"
::= { fsMIY1731FdEntry 5 }
fsMIY1731FdIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge port,
to which the MEP at which measurement takes place is attached.
"
::= { fsMIY1731FdEntry 6 }
fsMIY1731FdDelayValue OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the measured frame delay value.
"
::= { fsMIY1731FdEntry 7 }
fsMIY1731FdIFDV OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inter frame delay variation, (IFDV), calculated with respect to
current transaction.
"
::= { fsMIY1731FdEntry 8 }
fsMIY1731FdFDV OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame delay variation, (IFDV), calculated with respect to current
transaction.
"
::= { fsMIY1731FdEntry 9 }
fsMIY1731FdMeasurementType OBJECT-TYPE
SYNTAX INTEGER { oneWay(1), twoWay(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the frame-delay measurement (oneWay or twoWay).
"
::= { fsMIY1731FdEntry 10 }
-- ******************************************************************
-- The Frame Delay Statistics Table
-- ******************************************************************
fsMIY1731FdStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731FdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains output of one-way and
two-way delay measurement transaction.
"
::= { fsMIY1731Context 11 }
fsMIY1731FdStatsEntry OBJECT-TYPE
SYNTAX FsMIY1731FdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Delay Statistics table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731FdTransId
}
::= { fsMIY1731FdStatsTable 1 }
FsMIY1731FdStatsEntry ::= SEQUENCE {
fsMIY1731FdStatsTimeStamp TimeStamp,
fsMIY1731FdStatsDmmOut Unsigned32,
fsMIY1731FdStatsDmrIn Unsigned32,
fsMIY1731FdStatsDelayAverage FsY1731TimeRepresentation,
fsMIY1731FdStatsFDVAverage FsY1731TimeRepresentation,
fsMIY1731FdStatsIFDVAverage FsY1731TimeRepresentation,
fsMIY1731FdStatsDelayMin FsY1731TimeRepresentation,
fsMIY1731FdStatsDelayMax FsY1731TimeRepresentation
}
fsMIY1731FdStatsTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp at which one-way or two-way delay measurement (DMM) is
initiated.
"
::= { fsMIY1731FdStatsEntry 1 }
fsMIY1731FdStatsDmmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DMMs sent for a two-way delay measurement
transaction.
"
::= { fsMIY1731FdStatsEntry 2 }
fsMIY1731FdStatsDmrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests received for a one-way or responses received for
two-way delay measurement transaction.
"
::= { fsMIY1731FdStatsEntry 3 }
fsMIY1731FdStatsDelayAverage OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average delay measured for a one-way or two-way delay measurement
transaction.
"
::= { fsMIY1731FdStatsEntry 4 }
fsMIY1731FdStatsFDVAverage OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame Delay Variation (FDV) average calculated for a
delay measurement transaction.
"
::= { fsMIY1731FdStatsEntry 5 }
fsMIY1731FdStatsIFDVAverage OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inter Frame Delay Variation (IFDV) average calculated for
delay measurement transaction.
"
::= { fsMIY1731FdStatsEntry 6 }
fsMIY1731FdStatsDelayMin OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum value of frame-delay.
"
::= { fsMIY1731FdStatsEntry 7 }
fsMIY1731FdStatsDelayMax OBJECT-TYPE
SYNTAX FsY1731TimeRepresentation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum value of frame-delay.
"
::= { fsMIY1731FdStatsEntry 8 }
-- ******************************************************************
-- The Frame Loss Buffer Table
-- ******************************************************************
fsMIY1731FlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731FlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains a information about
the Frame-loss measured at various times by a MEP.
Size of this table is defined by the object
fsMIY1731FrameLossBufferSize. If the addition of a frame loss entry
would exceed the resources allocated to table, then the oldest entries
in the table are deleted until sufficient resources are available to
hold the new frame loss entry.
"
::= { fsMIY1731Context 12 }
fsMIY1731FlEntry OBJECT-TYPE
SYNTAX FsMIY1731FlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Loss Statistics table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731FlTransId,
fsMIY1731FlSeqNumber
}
::= { fsMIY1731FlTable 1 }
FsMIY1731FlEntry ::= SEQUENCE {
fsMIY1731FlTransId Unsigned32,
fsMIY1731FlSeqNumber Unsigned32,
fsMIY1731FlMeasurementTimeStamp TimeStamp,
fsMIY1731FlPeerMepMacAddress MacAddress,
fsMIY1731FlIfIndex InterfaceIndex,
fsMIY1731FlFarEndLoss Unsigned32,
fsMIY1731FlNearEndLoss Unsigned32,
fsMIY1731FlMeasurementTime TimeInterval
}
fsMIY1731FlTransId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a loss measurement transaction.
"
::= { fsMIY1731FlEntry 1 }
fsMIY1731FlSeqNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally maintained sequence number of Frame Loss Entries"
::= { fsMIY1731FlEntry 2 }
fsMIY1731FlMeasurementTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time at which frame-loss is actually measured.
"
::= { fsMIY1731FlEntry 3 }
fsMIY1731FlPeerMepMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the Mac Address of the peer MEP to which loss measurement
message(s) is sent.
"
::= { fsMIY1731FlEntry 4 }
fsMIY1731FlIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge port,
to which the MEP at which measurement takes place is attached.
"
::= { fsMIY1731FlEntry 5 }
fsMIY1731FlFarEndLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the far-end frame-loss value.
"
::= { fsMIY1731FlEntry 6 }
fsMIY1731FlNearEndLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the near-end frame-loss value.
"
::= { fsMIY1731FlEntry 7 }
fsMIY1731FlMeasurementTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time taken to measure frame-loss.
"
::= { fsMIY1731FlEntry 8 }
-- ******************************************************************
-- The Frame Loss Statistics Table
-- ******************************************************************
fsMIY1731FlStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731FlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains output of
frame-loss measurement transaction.
"
::= { fsMIY1731Context 13 }
fsMIY1731FlStatsEntry OBJECT-TYPE
SYNTAX FsMIY1731FlStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Loss Statistics table entry."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731FlTransId
}
::= { fsMIY1731FlStatsTable 1 }
FsMIY1731FlStatsEntry ::= SEQUENCE {
fsMIY1731FlStatsTimeStamp TimeStamp,
fsMIY1731FlStatsMessagesOut Unsigned32,
fsMIY1731FlStatsMessagesIn Unsigned32,
fsMIY1731FlStatsFarEndLossAverage Unsigned32,
fsMIY1731FlStatsNearEndLossAverage Unsigned32,
fsMIY1731FlStatsMeasurementType INTEGER,
fsMIY1731FlStatsFarEndLossMin Unsigned32,
fsMIY1731FlStatsFarEndLossMax Unsigned32,
fsMIY1731FlStatsNearEndLossMin Unsigned32,
fsMIY1731FlStatsNearEndLossMax Unsigned32
}
fsMIY1731FlStatsTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp at which frame-loss measurement transaction is initiated.
"
::= { fsMIY1731FlStatsEntry 1 }
fsMIY1731FlStatsMessagesOut OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames with ETH-LM information sent for a transaction.
"
::= { fsMIY1731FlStatsEntry 2 }
fsMIY1731FlStatsMessagesIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames with ETH-LM information received for a
transaction.
"
::= { fsMIY1731FlStatsEntry 3 }
fsMIY1731FlStatsFarEndLossAverage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average of the far-end frame-loss measured for a transaction.
"
::= { fsMIY1731FlStatsEntry 4 }
fsMIY1731FlStatsNearEndLossAverage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average of the near-end frame-loss measured for a transaction.
"
::= { fsMIY1731FlStatsEntry 5 }
fsMIY1731FlStatsMeasurementType OBJECT-TYPE
SYNTAX INTEGER { singleEnded(1), dualEnded(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the frame-loss measurement (Single-ended or Dual-ended) done.
"
::= { fsMIY1731FlStatsEntry 6 }
fsMIY1731FlStatsFarEndLossMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum value of far-end frame-loss.
"
::= { fsMIY1731FlStatsEntry 7 }
fsMIY1731FlStatsFarEndLossMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maxmium value of far-end frame-loss.
"
::= { fsMIY1731FlStatsEntry 8 }
fsMIY1731FlStatsNearEndLossMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the minimum value of near-end frame-loss.
"
::= { fsMIY1731FlStatsEntry 9 }
fsMIY1731FlStatsNearEndLossMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maxmium value of near-end frame-loss.
"
::= { fsMIY1731FlStatsEntry 10 }
-- ************************************************************************
-- The Remote Maintenance End Point Table for Y.1731 based MPLS-TP networks
-- ************************************************************************
fsMIY1731MplstpExtRemoteMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731MplstpExtRemoteMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Remote Maintenance End Point table for the Y.1731 extensions
over MPLS-TP networks.
Each row in the table realizes an ME for the MPLS-TP networks using
the local and remote MEP identifiers which are indices to the table.
This table is mainly used to associate a specific LSP/PW to an ME.
This table uses five indices, first index provides the virtual context
identifier in which this entry resides. The second index is the index
to the MEG table identifying the specific MD/Level. Third index is the
index to ME table identifying the specific MEG. The fourth index is
the Local MEP Indentifier. The fifth index is the remote MEP Identifier.
The writable objects in this table need to be persistent upon reboot
or restart of a device."
REFERENCE
"MPLS-TP OAM based on Y.1731, draft-bhh-mpls-tp-oam-y1731-06.txt."
::= { fsMIY1731Context 14 }
fsMIY1731MplstpExtRemoteMepEntry OBJECT-TYPE
SYNTAX FsMIY1731MplstpExtRemoteMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of the Remote Maintenenace End Point table entry used in
Y.1731 based MPLS-TP networks."
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier,
fsMIY1731MplstpExtRMepIdentifier
}
::= { fsMIY1731MplstpExtRemoteMepTable 1 }
FsMIY1731MplstpExtRemoteMepEntry ::= SEQUENCE {
fsMIY1731MplstpExtRMepIdentifier Dot1agCfmMepId,
fsMIY1731MplstpExtRMepServicePointer RowPointer,
fsMIY1731MplstpExtRMepRowStatus RowStatus
}
fsMIY1731MplstpExtRMepIdentifier OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maintenance End Point Identifier of a Remote MEP associated with the
Local-MEP(fsMIY1731MepIdentifier) which together constitutes an ME.
"
::= { fsMIY1731MplstpExtRemoteMepEntry 1 }
fsMIY1731MplstpExtRMepServicePointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the MPLS Transport path which represents the ME.
This object may point to an entry in the mplsTunnelTable, if the value
of the object fsMIEcfmExtMaPrimarySelectorType in fsMIEcfmExtMaTable is
mplsTunnelLsp.
Otherwise this object may point to an entry in the pwTable, if the value
of the object fsMIEcfmExtMaPrimarySelectorType in fsMIEcfmExtMaTable is
mplsPseudoWire.
"
::= { fsMIY1731MplstpExtRemoteMepEntry 2 }
fsMIY1731MplstpExtRMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { fsMIY1731MplstpExtRemoteMepEntry 3 }
-- *******************************************************************
-- ECFM-Y1731 Per Context Statistics Table
-- *******************************************************************
fsMIY1731StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of per virtual context ECFM-Y1731 Module Statistics."
::= { fsMIY1731Context 15 }
fsMIY1731StatsEntry OBJECT-TYPE
SYNTAX FsMIY1731StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per virtual context ECFM-Y1731 Module Statistics."
INDEX { fsMIY1731ContextId }
::= { fsMIY1731StatsTable 1 }
FsMIY1731StatsEntry ::= SEQUENCE {
fsMIY1731AisOut Unsigned32,
fsMIY1731AisIn Unsigned32,
fsMIY1731LckOut Unsigned32,
fsMIY1731LckIn Unsigned32,
fsMIY1731TstOut Unsigned32,
fsMIY1731TstIn Unsigned32,
fsMIY1731LmmOut Unsigned32,
fsMIY1731LmmIn Unsigned32,
fsMIY1731LmrOut Unsigned32,
fsMIY1731LmrIn Unsigned32,
fsMIY17311DmOut Unsigned32,
fsMIY17311DmIn Unsigned32,
fsMIY1731DmmOut Unsigned32,
fsMIY1731DmmIn Unsigned32,
fsMIY1731DmrOut Unsigned32,
fsMIY1731DmrIn Unsigned32,
fsMIY1731ApsOut Unsigned32,
fsMIY1731ApsIn Unsigned32,
fsMIY1731MccOut Unsigned32,
fsMIY1731MccIn Unsigned32,
fsMIY1731VsmOut Unsigned32,
fsMIY1731VsmIn Unsigned32,
fsMIY1731VsrOut Unsigned32,
fsMIY1731VsrIn Unsigned32,
fsMIY1731ExmOut Unsigned32,
fsMIY1731ExmIn Unsigned32,
fsMIY1731ExrOut Unsigned32,
fsMIY1731ExrIn Unsigned32,
fsMIY1731TxFailOpcode Unsigned32
}
fsMIY1731AisOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of AIS PDUs transmitted.
"
::= { fsMIY1731StatsEntry 1 }
fsMIY1731AisIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of AIS PDUs received.
"
::= { fsMIY1731StatsEntry 2 }
fsMIY1731LckOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LCK PDUs transmitted.
"
::= { fsMIY1731StatsEntry 3 }
fsMIY1731LckIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LCK PDUs received.
"
::= { fsMIY1731StatsEntry 4 }
fsMIY1731TstOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of TST PDUs transmitted.
"
::= { fsMIY1731StatsEntry 5 }
fsMIY1731TstIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of TST PDUs received.
"
::= { fsMIY1731StatsEntry 6 }
fsMIY1731LmmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMM PDUs transmitted.
"
::= { fsMIY1731StatsEntry 7 }
fsMIY1731LmmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMM PDUs received.
"
::= { fsMIY1731StatsEntry 8 }
fsMIY1731LmrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMR PDUs transmitted.
"
::= { fsMIY1731StatsEntry 9 }
fsMIY1731LmrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMR PDUs received.
"
::= { fsMIY1731StatsEntry 10 }
fsMIY17311DmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of 1DM PDUs transmitted.
"
::= { fsMIY1731StatsEntry 11 }
fsMIY17311DmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of 1DM PDUs received.
"
::= { fsMIY1731StatsEntry 12 }
fsMIY1731DmmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMM PDUs transmitted.
"
::= { fsMIY1731StatsEntry 13 }
fsMIY1731DmmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMM PDUs received.
"
::= { fsMIY1731StatsEntry 14 }
fsMIY1731DmrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMR PDUs transmitted.
"
::= { fsMIY1731StatsEntry 15 }
fsMIY1731DmrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMR PDUs received.
"
::= { fsMIY1731StatsEntry 16 }
fsMIY1731ApsOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of APS PDUs transmitted.
"
::= { fsMIY1731StatsEntry 17 }
fsMIY1731ApsIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of APS PDUs received.
"
::= { fsMIY1731StatsEntry 18 }
fsMIY1731MccOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of MCC PDUs transmitted.
"
::= { fsMIY1731StatsEntry 19 }
fsMIY1731MccIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of MCC PDUs received.
"
::= { fsMIY1731StatsEntry 20 }
fsMIY1731VsmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSM PDUs transmitted.
"
::= { fsMIY1731StatsEntry 21 }
fsMIY1731VsmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSM PDUs received.
"
::= { fsMIY1731StatsEntry 22 }
fsMIY1731VsrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSR PDUs transmitted.
"
::= { fsMIY1731StatsEntry 23 }
fsMIY1731VsrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSR PDUs received.
"
::= { fsMIY1731StatsEntry 24 }
fsMIY1731ExmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXM PDUs transmitted.
"
::= { fsMIY1731StatsEntry 25 }
fsMIY1731ExmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXM PDUs received.
"
::= { fsMIY1731StatsEntry 26 }
fsMIY1731ExrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXR PDUs transmitted.
"
::= { fsMIY1731StatsEntry 27 }
fsMIY1731ExrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXR PDUs received.
"
::= { fsMIY1731StatsEntry 28 }
fsMIY1731TxFailOpcode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the Opcode value of Last Tx Failure CFM PDU.
When CFM PDU is not transmitted from system due to system failure then
CFM PDU Tx failure trap is generated and the trap contains this value.
"
::= { fsMIY1731StatsEntry 29 }
-- ******************************************************************
-- The Port Table
-- ******************************************************************
fsMIY1731PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains ECFM information specific to interface.
"
::= { fsMIY1731System 1 }
fsMIY1731PortEntry OBJECT-TYPE
SYNTAX FsMIY1731PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is for each interface present in the system.
This table is indexed by the fsMIY1731PortIfIndex
"
INDEX { fsMIY1731PortIfIndex }
::= { fsMIY1731PortTable 1 }
FsMIY1731PortEntry ::= SEQUENCE {
fsMIY1731PortIfIndex InterfaceIndex,
fsMIY1731PortAisOut Unsigned32,
fsMIY1731PortAisIn Unsigned32,
fsMIY1731PortLckOut Unsigned32,
fsMIY1731PortLckIn Unsigned32,
fsMIY1731PortTstOut Unsigned32,
fsMIY1731PortTstIn Unsigned32,
fsMIY1731PortLmmOut Unsigned32,
fsMIY1731PortLmmIn Unsigned32,
fsMIY1731PortLmrOut Unsigned32,
fsMIY1731PortLmrIn Unsigned32,
fsMIY1731Port1DmOut Unsigned32,
fsMIY1731Port1DmIn Unsigned32,
fsMIY1731PortDmmOut Unsigned32,
fsMIY1731PortDmmIn Unsigned32,
fsMIY1731PortDmrOut Unsigned32,
fsMIY1731PortDmrIn Unsigned32,
fsMIY1731PortApsOut Unsigned32,
fsMIY1731PortApsIn Unsigned32,
fsMIY1731PortMccOut Unsigned32,
fsMIY1731PortMccIn Unsigned32,
fsMIY1731PortVsmOut Unsigned32,
fsMIY1731PortVsmIn Unsigned32,
fsMIY1731PortVsrOut Unsigned32,
fsMIY1731PortVsrIn Unsigned32,
fsMIY1731PortExmOut Unsigned32,
fsMIY1731PortExmIn Unsigned32,
fsMIY1731PortExrOut Unsigned32,
fsMIY1731PortExrIn Unsigned32,
fsMIY1731PortOperStatus FsY1731EnabledStatus,
fsMIY1731LastTxFailOpcode Unsigned32
}
fsMIY1731PortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port.
"
::= { fsMIY1731PortEntry 1 }
fsMIY1731PortAisOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of AIS PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 2 }
fsMIY1731PortAisIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of AIS PDUs received by this interface.
"
::= { fsMIY1731PortEntry 3 }
fsMIY1731PortLckOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LCK PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 4 }
fsMIY1731PortLckIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LCK PDUs received by this interface.
"
::= { fsMIY1731PortEntry 5 }
fsMIY1731PortTstOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of TST PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 6 }
fsMIY1731PortTstIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of TST PDUs received by this interface.
"
::= { fsMIY1731PortEntry 7 }
fsMIY1731PortLmmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMM PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 8 }
fsMIY1731PortLmmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMM PDUs received by this interface.
"
::= { fsMIY1731PortEntry 9 }
fsMIY1731PortLmrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMR PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 10 }
fsMIY1731PortLmrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of LMR PDUs received by this interface.
"
::= { fsMIY1731PortEntry 11 }
fsMIY1731Port1DmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of 1DM PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 12 }
fsMIY1731Port1DmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of 1DM PDUs received by this interface.
"
::= { fsMIY1731PortEntry 13 }
fsMIY1731PortDmmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMM PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 14 }
fsMIY1731PortDmmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMM PDUs received by this interface.
"
::= { fsMIY1731PortEntry 15 }
fsMIY1731PortDmrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMR PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 16 }
fsMIY1731PortDmrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of DMR PDUs received by this interface.
"
::= { fsMIY1731PortEntry 17 }
fsMIY1731PortApsOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of APS PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 18 }
fsMIY1731PortApsIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of APS PDUs received by this interface.
"
::= { fsMIY1731PortEntry 19 }
fsMIY1731PortMccOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of MCC PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 20 }
fsMIY1731PortMccIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of MCC PDUs received by this interface.
"
::= { fsMIY1731PortEntry 21 }
fsMIY1731PortVsmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSM PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 22 }
fsMIY1731PortVsmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSM PDUs received by this interface.
"
::= { fsMIY1731PortEntry 23 }
fsMIY1731PortVsrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSR PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 24 }
fsMIY1731PortVsrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of VSR PDUs received by this interface.
"
::= { fsMIY1731PortEntry 25 }
fsMIY1731PortExmOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXM PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 26 }
fsMIY1731PortExmIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXM PDUs received by this interface.
"
::= { fsMIY1731PortEntry 27 }
fsMIY1731PortExrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXR PDUs transmitted by this interface.
"
::= { fsMIY1731PortEntry 28 }
fsMIY1731PortExrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of EXR PDUs received by this interface.
"
::= { fsMIY1731PortEntry 29 }
fsMIY1731PortOperStatus OBJECT-TYPE
SYNTAX FsY1731EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status of Ethernet Y1731
functionality. This enables or disables Y1731 in the system.
If set to enable, enables the Y1731 for a particular port.
Otherwise, disables Y1731 for a particular port.
Note: The ECFM Module must be enabled for Y1731 to enable or disable."
DEFVAL { disabled }
::= { fsMIY1731PortEntry 30 }
fsMIY1731LastTxFailOpcode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will contain the Opcode value of Last Tx Failure CFM PDU.
When CFM PDU is not transmitted from system due to system failure then
CFM PDU Tx failure trap will generate & which contain this value.
"
::= { fsMIY1731PortEntry 31 }
-- ******************************************************************
-- MEP AVilability Table
-- ******************************************************************
fsMIY1731MepAvailabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIY1731MepAvailabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Entity Group End Point (MEP) Availability
table.
Each row in the table is associated with a different MEP.
This table uses three indices. The first two indices are the
indices of the Maintenance Entity Group (MEG) and Maintenance
Entity (ME) tables, the reason being that a MEP is always
related to an ME and MEG.
The MEP table stores all the managed objects for availability
measurement.
The objects which are used to initiate a transaction are to
be set only when the row-status of the table is active.
'fsMIY1731MepTransmit' naming convention is used to isolate
these objects from the others.
"
::= { fsMIY1731Context 16 }
fsMIY1731MepAvailabilityEntry OBJECT-TYPE
SYNTAX FsMIY1731MepAvailabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MEP Availability table entry"
INDEX { fsMIY1731ContextId,
fsMIY1731MegIndex,
fsMIY1731MeIndex,
fsMIY1731MepIdentifier
}
::= { fsMIY1731MepAvailabilityTable 1 }
FsMIY1731MepAvailabilityEntry ::= SEQUENCE {
fsMIY1731MepAvailabilityStatus FsY1731TransmitStatus,
fsMIY1731MepAvailabilityResultOK TruthValue,
fsMIY1731MepAvailabilityInterval FsY1731AvailabilityInterval,
fsMIY1731MepAvailabilityDeadline Unsigned32,
fsMIY1731MepAvailabilityLowerThreshold OCTET STRING,
fsMIY1731MepAvailabilityUpperThreshold OCTET STRING,
fsMIY1731MepAvailabilityModestAreaIsAvailable TruthValue,
fsMIY1731MepAvailabilityWindowSize Unsigned32,
fsMIY1731MepAvailabilityDestMacAddress MacAddress,
fsMIY1731MepAvailabilityDestMepId Dot1agCfmMepIdOrZero,
fsMIY1731MepAvailabilityDestIsMepId TruthValue,
fsMIY1731MepAvailabilityType FsY1731AvailabilityType,
fsMIY1731MepAvailabilitySchldDownInitTime Unsigned32,
fsMIY1731MepAvailabilitySchldDownEndTime Unsigned32,
fsMIY1731MepAvailabilityPriority Unsigned32,
fsMIY1731MepAvailabilityDropEnable TruthValue,
fsMIY1731MepAvailabilityPercentage OCTET STRING,
fsMIY1731MepAvailabilityRowStatus RowStatus
}
fsMIY1731MepAvailabilityStatus OBJECT-TYPE
SYNTAX FsY1731TransmitStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Enumerated value set to 'start' to initiate Avilability Measurement
and 'stop' to stop Availability Measurement.
'ready' and 'notReady' indicates whether Availability Measurement
can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
"
DEFVAL { ready }
::= { fsMIY1731MepAvailabilityEntry 1 }
fsMIY1731MepAvailabilityResultOK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- true Initiating Availability measurement by sending
LM Message (LMM) is successful.
- false Initiating Availability measurement has failed
as failure encountered in sending LM Message (LMM).
"
DEFVAL { true }
::= { fsMIY1731MepAvailabilityEntry 2 }
fsMIY1731MepAvailabilityInterval OBJECT-TYPE
SYNTAX FsY1731AvailabilityInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A time interval much smaller than Deadline,
Interval between two successive LMM transmissions to be used by the MEP
for calculating Availability.
"
DEFVAL { interval100ms }
::= { fsMIY1731MepAvailabilityEntry 3 }
fsMIY1731MepAvailabilityDeadline OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a timeout, in seconds, the Time interval to conduct
the availability functionality
"
::= { fsMIY1731MepAvailabilityEntry 4 }
fsMIY1731MepAvailabilityLowerThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Availability frame loss ratio threshold, the lower threshold used to define
an interval as available. If far-end loss ratio is lesser than
configured lower threshold, that interval will be declared as available.
AvailabilityLowerThreshold can be equal to AvailabilityUpperThreshold.
Example: 50% should be given as 35:30:2e:30:30
39.61% should be given as 33:39:2e:36:31
"
::= { fsMIY1731MepAvailabilityEntry 5 }
fsMIY1731MepAvailabilityUpperThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unavailability frame loss ratio threshold, the upper threshold to define
an interval as unavailable. If far-end loss ratio is greater than
configured upper threshold, that interval will be declared as unavailable.
Example: 50% should be given as 35:30:2e:30:30
39.61% should be given as 33:39:2e:36:31
"
::= { fsMIY1731MepAvailabilityEntry 6 }
fsMIY1731MepAvailabilityModestAreaIsAvailable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines whether the area between upper and lower
threshold is referred as available or unavailable.
True - If Calculated Frame loss ration falls
between upper and lower threshold,
it will be declared as Available.
False - If Calculated Frame loss ration falls
between upper and lower threshold,
it will be declared as Unavailable.
"
::= { fsMIY1731MepAvailabilityEntry 7 }
fsMIY1731MepAvailabilityWindowSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of consecutive small time intervals for assessing availability
"
::= { fsMIY1731MepAvailabilityEntry 8 }
fsMIY1731MepAvailabilityDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Availability Measurement.
"
::= { fsMIY1731MepAvailabilityEntry 9 }
fsMIY1731MepAvailabilityDestMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
fsMIY1731MepAvailabilityDestIsMepId is 'true'.
"
::= { fsMIY1731MepAvailabilityEntry 10 }
fsMIY1731MepAvailabilityDestIsMepId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True indicates that MEPID of the target MEP is used for
LMM transmission during Availability Measurement.
False indicates that unicast destination MAC address of the
target MEP is used for LMM transmission during Availability
Measurement.
"
::= { fsMIY1731MepAvailabilityEntry 11 }
fsMIY1731MepAvailabilityType OBJECT-TYPE
SYNTAX FsY1731AvailabilityType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
defStatic indicates that the algorithm for Availability Measurement
is static window algorithm. The availability measurement will be
conducted as per MEF 10.2
(Section 6.9.7. Availability Performance for a Point-to-Point EVC)
defSliding indicates that the algorithm for Availability Measurement
is sliding window algorithm. The availability measurement will be
conducted as per ITU-T Y.1563
( Section 9 Ethernet service availability )
"
DEFVAL { defStatic }
::= { fsMIY1731MepAvailabilityEntry 12 }
fsMIY1731MepAvailabilitySchldDownInitTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time when Scheduled down time is initiated, denotes the beginning of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the Service Provider.
Init Time should be defined with reference to zero and dealine.
"
::= { fsMIY1731MepAvailabilityEntry 13 }
fsMIY1731MepAvailabilitySchldDownEndTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time when Scheduled down time is ending, denotes the ending of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the Service Provider.
End Time should be defined with reference to zero and dealine.
"
::= { fsMIY1731MepAvailabilityEntry 14 }
fsMIY1731MepAvailabilityPriority OBJECT-TYPE
SYNTAX Unsigned32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.
"
DEFVAL { 7 }
::= { fsMIY1731MepAvailabilityEntry 15 }
fsMIY1731MepAvailabilityDropEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.
"
DEFVAL { false }
::= { fsMIY1731MepAvailabilityEntry 16 }
fsMIY1731MepAvailabilityPercentage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the percentage of Availability
If fsMIY1731MepAvailabilityType is selected as defStatic,
this object contains the Availability Performance metric
as defined in MEF 10.2
(Section 6.9.7. Availability Performance for a Point-to-Point EVC)
If fsMIY1731MepAvailabilityType is selected as defSliding,
this object contains Percent Ethernet service availability
as defined in ITU-T Y.1563
( Section 9 Ethernet service availability )
Example: 50% will be given as 35:30:2e:30:30
39.61% will be given as 33:39:2e:36:31
"
::= { fsMIY1731MepAvailabilityEntry 17 }
fsMIY1731MepAvailabilityRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of MEP Availability Table row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible values are row status active and
row status not active.
"
::= { fsMIY1731MepAvailabilityEntry 18 }
-- ******************************************************************
-- MEP AVilability Table ENDS
-- ******************************************************************
-- ******************************************************************
-- NOTIFICATIONS (TRAPS)
-- These notifications will be sent to the management entity
-- whenever a MEP loses/restores contact with one or more other MEPs.
-- ******************************************************************
fsMIY1731FrameLossTrap NOTIFICATION-TYPE
OBJECTS { fsMIY1731ContextName,
fsMIY1731FlMeasurementTimeStamp,
fsMIY1731FlStatsMeasurementType,
fsMIY1731FlFarEndLoss,
fsMIY1731FlNearEndLoss
}
STATUS current
DESCRIPTION
"Any MEP can measure frame-loss. A notification
is sent to the management entity with the OID
of the MEP that has measured frame-loss exceeded thresholds.
To warn the system administrator of the problem,
as controlled by the MEP
If measured frame-loss exceeds threshold is raised after a notification
has been sent, another notification is issued.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the MEP reporting the frame-loss
by the indices in the OID of the each element of trap
variable except fsMIY1731ContextName in the notification:
fsMIY1731MegIndex - Also the index of the MEP's
Maintenance Entity Group table entry
(fsMIY1731MegTable).
fsMIY1731MeIndex - Also an index (with the MEG table index)
of the MEP's Maintenance Entity
table entry (fsMIY1731MeTable).
fsMIY1731MepIdentifier - MEP Identifier and final index
into the MEP table (fsMIY1731MepTable).
"
::= { fsMIY1731Notifications 1 }
fsMIY1731DefectConditionTrap NOTIFICATION-TYPE
OBJECTS { fsMIY1731ContextName,
fsMIY1731ErrorLogType
}
STATUS current
DESCRIPTION
"A MEP has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Whenever a MEP has a persistent defect,
it may or may not generate a Fault Alarm to warn the system
administrator of the problem.
If a defect is raised after a Fault
Alarm has been issued, another Fault Alarm is issued.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the MEP reporting the defect
by the indices in the OID of the fsMIY1731ErrorLogType
variable in the notification:
fsMIY1731MegIndex - Also the index of the MEP's
Maintenance Entity Group table entry
(fsMIY1731MegTable).
fsMIY1731MeIndex - Also an index (with the MEG table index)
of the MEP's Maintenance Entity
table entry (fsMIY1731MeTable).
fsMIY1731MepIdentifier - MEP Identifier and final index
into the MEP table (fsMIY1731MepTable)
"
::= { fsMIY1731Notifications 2 }
fsMIY1731TstRecivedWithErrorTrap NOTIFICATION-TYPE
OBJECTS { fsMIY1731ContextName,
fsMIY1731MepBitErroredTstIn
}
STATUS current
DESCRIPTION
"Any MEP has received a TST PDU and the validation criteria has failed
A notification is sent to the management entity with the OID
of the MEP that has received the TST PDU.
If a invalid TST PDU is received after a notification
has been sent, another notification is issued.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the MEP reporting the invalid TST PDU
by the indices in the OID of the each element of trap
variable except fsMIY1731ContextName in the notification:
fsMIY1731MegIndex - Also the index of the MEP's
Maintenance Entity Group entry
(fsMIY1731MegTable).
fsMIY1731MeIndex - Also an index (with the MEG table index)
of the MEP's Maintenance Entity
table entry (fsMIY1731MeTable).
fsMIY1731MepIdentifier - MEP Identifier and final index
into the MEP table (fsMIY1731MepTable).
"
::= { fsMIY1731Notifications 3 }
fsMIY1731FrameDelayTrap NOTIFICATION-TYPE
OBJECTS { fsMIY1731ContextName,
fsMIY1731FdMeasurementTimeStamp,
fsMIY1731FdMeasurementType,
fsMIY1731FdDelayValue
}
STATUS current
DESCRIPTION
"Any MEP can measure frame-delay. A notification
is sent to the management entity with the OID
of the MEP that has measured frame-delay exceeded threshold.
To warn the system administrator of the problem,
as controlled by the MEP
If measured frame-delay exceeds threshold is raised after a notification
has been sent, another notification is issued.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the MEP reporting the frame-delay
by the indices in the OID of the each element of trap
variable except fsMIY1731ContextName in the notification:
fsMIY1731MegIndex - Also the index of the MEP's
Maintenance Entity Group entry
(fsMIY1731MegTable).
fsMIY1731MeIndex - Also an index (with the MEG table index)
of the MEP's Maintenance Entity
table entry (fsMIY1731MeTable).
fsMIY1731MepIdentifier - MEP Identifier and final index
into the MEP table (fsMIY1731MepTable).
"
::= { fsMIY1731Notifications 4 }
fsMIY1731TxFailTrap NOTIFICATION-TYPE
OBJECTS {
fsMIY1731LastTxFailOpcode
}
STATUS current
DESCRIPTION
"To warn the system administrator when there is CFM Tx Failure occurred.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the Port Number & Opcode value
in the OID Port Number will be appended with the Opcode OID:
fsMIY1731LastTxFailOpcode - Last Tx Failure CFM PDU Opcode Value.
"
::= { fsMIY1731Notifications 5 }
END
View Git Blame Copy Permalink