752 lines
31 KiB
Plaintext
752 lines
31 KiB
Plaintext
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
|
|
-- $Id: fsbfd.mib,v 1.6 2013/07/13 12:43:32 siva Exp $
|
|
|
|
|
|
-- BFD Proprietary MIB Definition
|
|
-- This MIB contains tables used to configure a switch running
|
|
-- BFD in addition to the standard BFD MIB.
|
|
|
|
SUPERMICRO-BFD-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32, Unsigned32,
|
|
Counter32, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
|
|
RowPointer,TruthValue,TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
|
|
bfdSessEntry, bfdSessDesiredMinTxInterval,
|
|
bfdSessNegotiatedInterval, bfdSessReqMinRxInterval,
|
|
bfdSessDiscriminator, bfdSessRemoteDiscr, bfdSessState
|
|
FROM BFD-STD-MIB
|
|
|
|
BfdSessOperModeTC, BfdIntervalTC, BfdMultiplierTC
|
|
FROM BFD-TC-STD-MIB;
|
|
|
|
fsBfd MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO "support@Supermicro.com"
|
|
DESCRIPTION
|
|
"This proprietary MIB for BFD is to provide a proactive
|
|
mechanism to detect faults using BFD."
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
"This proprietary MIB for BFD is to provide a proactive
|
|
mechanism to detect faults using BFD."
|
|
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) extended(2) 53 }
|
|
|
|
|
|
-- ------------------------------------------------------------
|
|
-- groups in the MIB
|
|
-- ------------------------------------------------------------
|
|
|
|
fsBfdGlobals OBJECT IDENTIFIER ::= { fsBfd 1 }
|
|
fsBfdObjects OBJECT IDENTIFIER ::= { fsBfd 2 }
|
|
fsBfdNotification OBJECT IDENTIFIER ::= { fsBfd 3 }
|
|
|
|
-- ------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- ------------------------------------------------------------
|
|
|
|
FsSessionMapTypeTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate the type of MPLS or MPLS-TP path associated to
|
|
the session"
|
|
SYNTAX INTEGER {
|
|
nonteipv4(1), -- mapping into LDP IPv4
|
|
nonteipv6(2), -- mapping into LDP IPv6
|
|
teipv4(3), -- mapping into TE IPv4 Working LSP
|
|
teipv6(4), -- mapping into TE IPv6
|
|
pw(5), -- mapping into Pseudowires
|
|
mep(6), -- mapping into MEPs in MPLS-TP
|
|
teipv4protection(7) -- mapping into TE IPv4 Protecting LSP
|
|
}
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- BFD Global objects for System Config
|
|
-- ------------------------------------------------------------------
|
|
fsBfdSystemControl OBJECT-TYPE
|
|
SYNTAX INTEGER { start(1), shutdown(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative system control status of the BFD module.
|
|
The value 'start' (1) indicates that the BFD feature should be
|
|
started in the system and all resources required by
|
|
the BFD module should be allocated.
|
|
The value 'shutdown' (2) indicates that the BFD feature should be
|
|
shutdown in the device and all allocated memory must be released."
|
|
DEFVAL { start }
|
|
::= { fsBfdGlobals 1 }
|
|
|
|
fsBfdTraceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to store the trace options that are enabled
|
|
by the user. The bit positions to enable specific traces are as
|
|
shown below :
|
|
|
|
Bit 0 - init-shut
|
|
Bit 1 - mgmt
|
|
Bit 2 - data
|
|
Bit 3 - ctrl
|
|
Bit 4 - pkt-dump
|
|
Bit 5 - resource
|
|
Bit 6 - all-fail
|
|
Bit 7 - buf
|
|
|
|
Bit 8 - sess-estb
|
|
Bit 9 - sess-down
|
|
Bit 10 - poll-seq
|
|
Bit 11 - critical
|
|
Bit 12 - redundancy
|
|
Bit 13 - Offload
|
|
|
|
A value of zero(0) indicates traces are disabled and a value with
|
|
all bits set to one indicates all traces are enabled.
|
|
By default critical trace (Bit 11) is set."
|
|
DEFVAL { '00000800'H }
|
|
::= { fsBfdGlobals 2 }
|
|
|
|
fsBfdTrapEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable or disable specific traps in the
|
|
system. The bit positions to enable specific traps are as shown
|
|
below :
|
|
|
|
Bit 0 - enables the bfdSessUp/bfdSessDown notification
|
|
Bit 1 - enables the fsBfdSessBtstrapFailTrap notificaton
|
|
Bit 2 - enables the fsBfdSessNegTxIntvlChange notification
|
|
Bit 3 - enables the fsBfdSessAdminCtrlErrTrap notification
|
|
|
|
A value of zero(0) indicates traps are disabled and a value with
|
|
all bits set to one indicates all traps are enabled.
|
|
By default no traps will be enabled.
|
|
Note that bfdSessUp and bfdSessDown notifications
|
|
can be set either using the object bfdSessNotificationsEnable
|
|
or using this object and the same will be reflected in both the
|
|
objects"
|
|
DEFVAL { 0 }
|
|
::= { fsBfdGlobals 3 }
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- BFD Global Objects for Session Config
|
|
-- ------------------------------------------------------------------
|
|
|
|
fsBfdGblSessOperMode OBJECT-TYPE
|
|
SYNTAX BfdSessOperModeTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the operating mode applicable to all BFD
|
|
sessions in the system. This value will serve as the default
|
|
operational mode for all BFD session entries during session entry
|
|
creation, in the absence of a per-session operational mode being
|
|
configured for each session entry.Modification of this object will
|
|
thereon not be reflected to the individual session enteries.
|
|
(Modification of session opertional mode for individual session
|
|
enteries should be done using the object 'bfdSessOperMode' in the
|
|
session table.) The modified value of this object will be used only
|
|
for the session enteries created after modification.
|
|
The default operational mode is 'asynchModeWOEchoFunction'."
|
|
DEFVAL { asynchModeWOEchoFunction }
|
|
::= { fsBfdGlobals 4 }
|
|
|
|
fsBfdGblDesiredMinTxIntvl OBJECT-TYPE
|
|
SYNTAX BfdIntervalTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum interval, in microseconds, that
|
|
the local system would like to use when transmitting BFD Control
|
|
packets. This value will serve as the default desired transmit
|
|
interval for all BFD session entries during session entry creation,
|
|
in the absence of a per-session desired transmit interval being
|
|
configured for each session entry. Modification of this object will
|
|
thereon not be reflected to the individual session enteries.
|
|
(Modification of the desired transmit interval for individual
|
|
session enteries should be done using the object
|
|
'bfdSessDesiredMinTxInterval' in the session table.)
|
|
The modified value of this object will be used
|
|
only for the session enteries created after modification.
|
|
The default desired transmit interval is 1 second."
|
|
DEFVAL { 1000000 }
|
|
::= { fsBfdGlobals 5 }
|
|
|
|
fsBfdGblReqMinRxIntvl OBJECT-TYPE
|
|
SYNTAX BfdIntervalTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum interval, in microseconds,
|
|
between received BFD Control packets the local system is capable
|
|
of supporting. This value will serve as the default receive
|
|
interval for all BFD session entries during session entry creation,
|
|
in the absence of a per-session required receive interval being
|
|
configured for each session entry. Modification of this object will
|
|
thereon not be reflected to the individual session enteries.
|
|
(Modification of the receive interval for individual
|
|
session enteries should be done using the object
|
|
'bfdSessReqMinRxInterval' in the session table.)
|
|
The modified value of this object will be used
|
|
only for the session enteries created after modification.
|
|
The default required receive interval is 1 second."
|
|
DEFVAL { 1000000 }
|
|
::= { fsBfdGlobals 6 }
|
|
|
|
fsBfdGblDetectMult OBJECT-TYPE
|
|
SYNTAX BfdMultiplierTC
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Detect time multiplier. This value will
|
|
serve as the default detect time multiplier for all BFD session
|
|
entries during session entry creation , in the absence of a
|
|
per-session detect time multiplier being configured for each
|
|
session entry. Modification of this object will thereon not
|
|
be reflected to the individual session enteries. (Modification
|
|
of the detect time multiplier for individual session enteries
|
|
should be done using the object 'bfdSessDetectMult' in the
|
|
session table.) The modified value of this object will be used
|
|
only for the session enteries created after modification."
|
|
DEFVAL { 3 }
|
|
::= { fsBfdGlobals 7 }
|
|
|
|
fsBfdGblSlowTxIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000000..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval, in microseconds, between
|
|
BFD control packet transmission (bootstrapped or otherwise) during
|
|
the BFD session establishment process until the session comes to
|
|
the UP state at both end systems.
|
|
After the session is in the UP state in both the local and remote
|
|
system, the packets will be transmitted at an interval influenced
|
|
by the session's negotiated transmit interval and the value in
|
|
this object will not be used."
|
|
DEFVAL { 1000000 }
|
|
::= { fsBfdGlobals 8 }
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- BFD Global objects for Statistics
|
|
-- ------------------------------------------------------------------
|
|
|
|
fsBfdMemAllocFailure OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the count of total memory allocation failures in
|
|
the BFD module"
|
|
::= { fsBfdGlobals 9 }
|
|
|
|
fsBfdInputQOverFlows OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives the count of total input queue overflows for the
|
|
BFD module"
|
|
::= {fsBfdGlobals 10}
|
|
|
|
fsBfdClrGblStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to clear the global statistics of the BFD
|
|
module.
|
|
Setting this object to true will cause the statistics to be reset
|
|
and setting this object to false will have no effect.
|
|
A Get operation on this object will always return a value of false."
|
|
DEFVAL { false }
|
|
::= { fsBfdGlobals 11 }
|
|
|
|
fsBfdClrAllSessStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to clear all the statistics and counters of all
|
|
the BFD sessions currently running in the system. Setting this
|
|
object to true will cause the statistics to be reset and setting
|
|
this object to false will have no effect.
|
|
A Get operation on this object will always return a value of false."
|
|
DEFVAL { false }
|
|
::= { fsBfdGlobals 13 }
|
|
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- BFD Objects for Session Config
|
|
-- ------------------------------------------------------------------
|
|
-- fsBfdSessionTable - bfdSessTable Augment
|
|
|
|
fsBfdSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsBfdSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is an augment to the bfdSessTable for configuring
|
|
BFD sessions for MPLS or MPLS-TP paths."
|
|
::= { fsBfdObjects 1 }
|
|
|
|
fsBfdSessionEntry OBJECT-TYPE
|
|
SYNTAX FsBfdSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table augments a row in bfdSessTable."
|
|
AUGMENTS { bfdSessEntry }
|
|
::= { fsBfdSessionTable 1 }
|
|
|
|
FsBfdSessionEntry ::= SEQUENCE {
|
|
fsBfdSessRole INTEGER,
|
|
fsBfdSessMode INTEGER,
|
|
fsBfdSessRemoteDiscr Unsigned32,
|
|
fsBfdSessEXPValue Unsigned32,
|
|
fsBfdSessTmrNegotiate TruthValue,
|
|
fsBfdSessOffld TruthValue,
|
|
fsBfdSessEncapType INTEGER,
|
|
fsBfdSessAdminCtrlReq TruthValue,
|
|
fsBfdSessAdminCtrlErrReason INTEGER,
|
|
fsBfdSessMapType FsSessionMapTypeTC,
|
|
fsBfdSessMapPointer RowPointer,
|
|
fsBfdSessCardNumber Unsigned32,
|
|
fsBfdSessSlotNumber Unsigned32,
|
|
fsBfdSessRegisteredClients Unsigned32
|
|
}
|
|
|
|
|
|
fsBfdSessRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the system is playing the
|
|
active(1) role or the passive(2) role for this BFD session.
|
|
BFD session will not come up if both the ends of a path are
|
|
configured to be passive. In case of MPLS and MPLS-TP LSP,
|
|
it is expected to configure the BFD session in the
|
|
ingress of the LSP as Active. Even in the case of static
|
|
provisioning of discriminators, it is recommended to
|
|
configure the BFD session as Active at the ingress and
|
|
as Passive at the egress. In the case of PW, BFD session
|
|
at both the ends should be Active."
|
|
REFERENCE
|
|
"RFC 5880, Section 6.1"
|
|
DEFVAL { active }
|
|
::= { fsBfdSessionEntry 1 }
|
|
|
|
fsBfdSessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cc(1),
|
|
ccv(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the BFD session is running in
|
|
Continuity Check(CC) or the Connectivity Verification(CV) mode.
|
|
This object is always cc(1) if the value of fsBfdSessMapType is
|
|
any value other than mep(6).
|
|
|
|
When the fsBfdSessMapType is mep(6) and indicates that this
|
|
BFD session is for an MPLS-TP path, then this object can hold
|
|
either a CC(1) or a CCV(2) value."
|
|
REFERENCE
|
|
" draft-ietf-mpls-tp-cc-cv-00 "
|
|
DEFVAL { cc }
|
|
::= { fsBfdSessionEntry 2 }
|
|
|
|
fsBfdSessRemoteDiscr OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 1..4294967295)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the session discriminator that is to be used
|
|
by the remote system for this BFD session. This object is
|
|
configurable for both MPLS and MPLS-TP paths.
|
|
|
|
The value may be zero(0) if the remote discriminator is not yet
|
|
known or if session is in the down or adminDown state.
|
|
|
|
A Get operation on the this object will return the same value as
|
|
the bfdSessRemoteDiscr object for each BFD session."
|
|
REFERENCE
|
|
"draft-ieft-mpls-tp-lsp-ping-bfd-procedures-00 Section 3"
|
|
::= { fsBfdSessionEntry 3 }
|
|
|
|
fsBfdSessEXPValue OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the MPLS experimental field(traffic class
|
|
field) value that should be sent in the MPLS header for the
|
|
BFD control packets."
|
|
DEFVAL { 0 }
|
|
::= { fsBfdSessionEntry 4 }
|
|
|
|
fsBfdSessTmrNegotiate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if timer negotiation is required for
|
|
the BFD session. When set to false, timer negotiation is
|
|
disabled and if the value of the received DesiredMinTxInterval
|
|
is different from the locally configured RequiredMinRxInterval,
|
|
or the received value of the Detect Multiplier field is
|
|
different from the locally configured value, then a Period
|
|
Mis-Configuration defect will be detected. When this object is
|
|
set to true, support for Period Mis-Configuration defect is
|
|
not provided."
|
|
DEFVAL { true }
|
|
::= { fsBfdSessionEntry 5 }
|
|
|
|
fsBfdSessOffld OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if the BFD session needs to be
|
|
offloaded onto a specific hardware chipset or an external
|
|
software component or a seperate CPU/Core. When set to true
|
|
the BFD session will be offloaded."
|
|
DEFVAL { false }
|
|
::= { fsBfdSessionEntry 6 }
|
|
|
|
fsBfdSessEncapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mplsIp (1),
|
|
mplsAch (2),
|
|
mplsAchIp (3),
|
|
vccvNegotiated (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the encapsulation type of the
|
|
BFD Control packets. In case of MPLS LSP/Tunnel, the
|
|
encapsulation type should be set to mplsIp, which is the
|
|
default value for MPLS LSP/Tunnel.Note that for an MPLS
|
|
LSP/Tunnel,an IP return path, if present, will be used to
|
|
send the BFD control packets, in case an MPLS LSP/Tunnel
|
|
return path is not available.
|
|
|
|
For MPLS-TP LSP/Tunnel any one of the following
|
|
types: mplsIp, mplsAch or mplsAchIp is applicable,
|
|
mplsAch being the default.For MPLS or MPLS-TP PW,
|
|
the encapsulation type should be set to vccvNegotiated,
|
|
which is the default value for MPLS and
|
|
MPLS-TP PW."
|
|
::= { fsBfdSessionEntry 7 }
|
|
|
|
fsBfdSessAdminCtrlReq OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if an administrator control or
|
|
intervention is required for the session due to an
|
|
error specified by fsBfdSessAdminCtrlErrReason. This object
|
|
will display True when such an administrator control
|
|
is required, for eg if a period mis-configuration
|
|
defect is detected for a session, the same will be
|
|
indicated by fsBfdSessAdminCtrlErrReason and this object will
|
|
be set to true. The administrator may then take the necessary
|
|
action eg in this case change the timer values to rectify the
|
|
defect"
|
|
::= { fsBfdSessionEntry 8 }
|
|
|
|
fsBfdSessAdminCtrlErrReason OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none (0),
|
|
sessOffloadFailure (1),
|
|
periodMisConfigDefect (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the reason for an error in the
|
|
BFD session. For instance, when offloading of a BFD session
|
|
fails due to any reason, this object is set to the value
|
|
sessOffloadFailure. Similarly if a period mis-configuration
|
|
defect is detected, this object specifies the same and is set
|
|
to periodMisConfigDefect(2). By default when there is no error
|
|
value none(0)is used."
|
|
::= { fsBfdSessionEntry 9 }
|
|
|
|
fsBfdSessMapType OBJECT-TYPE
|
|
SYNTAX FsSessionMapTypeTC
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of path being monitored by this
|
|
BFD session entry."
|
|
::= { fsBfdSessionEntry 10 }
|
|
|
|
fsBfdSessMapPointer OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If fsBfdSessMapType is ldpipv4(1) or ldpipv6(2), then this object
|
|
MUST contain zeroDotZero or point to an instance of the mplsXCEntry
|
|
indicating the LDP-based LSP associated with this BFD session.
|
|
|
|
If fsBfdSessMapType is rsvpipv4(3) or rsvpipv6(4), then this object
|
|
MUST contain zeroDotZero or point to an instance of the
|
|
mplsTunnelEntry indicating the RSVP-based MPLS TE tunnel associated
|
|
with this BFD session.
|
|
|
|
If fsBfdSessMapType is pw(5), then this object MUST contain
|
|
zeroDotZero or point to an instance of the pwEntry indicating the
|
|
MPLS Pseudowire associated with this BFD session.
|
|
|
|
If fsBfdSessMapTpye is mep(6). then this object MUST contain
|
|
zeroDotZero or point to an instance identifying the MEP entity
|
|
configured for monitoring the MPLS-TP path associated with this BFD
|
|
session.
|
|
|
|
If this object points to a conceptual row instance in a table
|
|
consistent with fsBfdSessMapType but this instance does not
|
|
currently exist then no valid path is associated with this session
|
|
entry.
|
|
|
|
If this object contains zeroDotZero then no valid path is
|
|
associated with this BFD session entry till it is populated with
|
|
a valid pointer consistent with the value of fsBfdSessMapType
|
|
as explained above."
|
|
::= { fsBfdSessionEntry 11 }
|
|
|
|
fsBfdSessCardNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the card number to which the BFD session is
|
|
offloaded."
|
|
::= { fsBfdSessionEntry 12 }
|
|
|
|
fsBfdSessSlotNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the slot number to which the BFD session
|
|
is offloaded."
|
|
::= { fsBfdSessionEntry 13 }
|
|
|
|
fsBfdSessRegisteredClients OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the BFD clients who are all registered for the
|
|
particular session. When each client register for the session, the
|
|
bit corresponding to the Client ID will be set in this field.
|
|
For Example, if OSPF with client ID 1 registers for the session,then the
|
|
first bit will be set in this field (i.e. 0x80 00 00 00)"
|
|
::= { fsBfdSessionEntry 14 }
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- BFD Objects for Session performance
|
|
-- ------------------------------------------------------------------
|
|
-- fsBfdSessPerfTable - bfdSessPerfTable Augment
|
|
|
|
fsBfdSessPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsBfdSessPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is an augment to the bfdSessPerfTable"
|
|
::= { fsBfdObjects 2 }
|
|
|
|
fsBfdSessPerfEntry OBJECT-TYPE
|
|
SYNTAX FsBfdSessPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table augments the bfdSessPerfTable"
|
|
AUGMENTS { bfdSessEntry }
|
|
::= { fsBfdSessPerfTable 1 }
|
|
|
|
FsBfdSessPerfEntry ::= SEQUENCE {
|
|
fsBfdSessPerfCCPktIn Counter32,
|
|
fsBfdSessPerfCCPktOut Counter32,
|
|
fsBfdSessPerfCVPktIn Counter32,
|
|
fsBfdSessPerfCVPktOut Counter32,
|
|
fsBfdSessMisDefCount Counter32,
|
|
fsBfdSessLocDefCount Counter32,
|
|
fsBfdSessRdiInCount Counter32,
|
|
fsBfdSessRdiOutCount Counter32,
|
|
fsBfdClearStats TruthValue
|
|
}
|
|
|
|
fsBfdSessPerfCCPktIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of BFD CC control messages received for this
|
|
BFD session."
|
|
::= { fsBfdSessPerfEntry 1 }
|
|
|
|
fsBfdSessPerfCCPktOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of BFD CC control messages sent for this BFD
|
|
session."
|
|
::= { fsBfdSessPerfEntry 2 }
|
|
|
|
fsBfdSessPerfCVPktIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of BFD CV control messages received for this
|
|
BFD session."
|
|
::= { fsBfdSessPerfEntry 3 }
|
|
|
|
fsBfdSessPerfCVPktOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of BFD CV control messages sent for this BFD
|
|
session."
|
|
::= { fsBfdSessPerfEntry 4 }
|
|
|
|
fsBfdSessMisDefCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives a count of the misconnectivity defects
|
|
detected for the BFD session. For instance, this count will be
|
|
incremented when the received BFD control packet carries an
|
|
incorrect globally unique source MEP identifier.
|
|
This count is valid only for MPLS-TP paths. For MPLS paths
|
|
this count will show a value 0 and will not be incremented."
|
|
::= { fsBfdSessPerfEntry 5 }
|
|
|
|
fsBfdSessLocDefCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives a count of the Loss of continuity defects
|
|
detected in MPLS and MPLS-TP path ."
|
|
::= { fsBfdSessPerfEntry 6 }
|
|
|
|
fsBfdSessRdiInCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives a count of the Remote Defect Indications
|
|
received for the BFD session in MPLS-TP environment.
|
|
It is valid only for bi-directional MPLS-TP paths.For MPLS
|
|
paths this count will show a value 0 and will not be incremented."
|
|
::= { fsBfdSessPerfEntry 7 }
|
|
|
|
fsBfdSessRdiOutCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object gives a count of the Remote Defect Indications
|
|
sent by the BFD session in MPLS-TP environment.
|
|
It is valid only for bi-directional MPLS-TP paths.For MPLS
|
|
paths this count will show a value 0 and will not be incremented."
|
|
::= { fsBfdSessPerfEntry 8 }
|
|
|
|
|
|
fsBfdClearStats OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to clear all the statistic counters for this
|
|
BFD session.
|
|
Setting this object to true will cause the statistics to be reset
|
|
and setting this object to false will have no effect.
|
|
A Get operation on this object will always return a value of
|
|
false."
|
|
DEFVAL { false }
|
|
::= { fsBfdSessPerfEntry 9 }
|
|
|
|
-- ------------------------------------------------------------------
|
|
-- BFD Notification Group
|
|
-- ------------------------------------------------------------------
|
|
fsBfdTraps OBJECT IDENTIFIER ::= { fsBfdNotification 0 }
|
|
|
|
|
|
fsBfdSessBtstrapFailTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bfdSessDiscriminator
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when session establishment
|
|
fails while using LSP Ping Bootstrap."
|
|
::= { fsBfdTraps 1 }
|
|
|
|
|
|
fsBfdSessNegTxIntvlChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bfdSessDiscriminator,
|
|
bfdSessRemoteDiscr,
|
|
bfdSessNegotiatedInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the negotiated transmit
|
|
interval changes due to a change in the local DesiredMinTxInterval
|
|
value or remote RequiredMinRxInterval value."
|
|
::= { fsBfdTraps 2 }
|
|
|
|
fsBfdSessAdminCtrlErrTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
bfdSessState,
|
|
bfdSessDiscriminator,
|
|
fsBfdSessAdminCtrlErrReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated in case of an error detected in
|
|
the BFD sesion. For instance, when fsBfdSessTmrNegotiate is set
|
|
to false and the value of the received Desired min TX interval is
|
|
different from the locally configured reception period, or the
|
|
received value of the Detect Multiplier is different from the
|
|
locally configured one, a period misconfiguration defect will be
|
|
detected and this trap will be raised.
|
|
|
|
This notification is also generated when any failure occurs
|
|
during offloading of the BFD session. This includes failure in
|
|
transmission of packets in the Offload module when the same
|
|
is indicated to the control plane by the Offload module."
|
|
::= { fsBfdTraps 3 }
|
|
|
|
END
|