1479 lines
48 KiB
Plaintext
1479 lines
48 KiB
Plaintext
-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved
|
|
|
|
-- $Id: fsnat.mib,v 1.11 2012/09/07 09:52:05 siva Exp $
|
|
-- NAT Proprietary MIB Definition
|
|
|
|
|
|
-- This document explains the proprietary MIB implemented for FutureNAT
|
|
-- product.
|
|
|
|
-- The FS proprietary MIB definitions, which mostly contains extra
|
|
-- statistic objects and objects that can enable or disable certain features
|
|
-- of a protocol or the protocol itself. The various groups that are present
|
|
-- in the proprietary MIB are :
|
|
--
|
|
-- NAT
|
|
-- This group contains all the scalar objects and tables that are need for
|
|
-- configuring FutureNAT. All the scalar objects are listed under the table
|
|
-- natStatInfo.
|
|
-- Information on various tables.
|
|
--
|
|
-- natStatInfo: The objects natEnable, natIdleTimeOut, natTypicalNumberOfEntries
|
|
-- and natTranslateLocalPortStart are used for configuring
|
|
-- FutureNAT globally. The other object viz.
|
|
-- natStatTotalNumberOfSessionsClosed,
|
|
-- natStatTotalNumberOfTranslations,
|
|
-- natStatDynamicAllocFailureCount,
|
|
-- natStatTotalNumberOfActiveSessions,
|
|
-- natStatTotalNumberOfPktsDropped are used to statistic
|
|
-- information.
|
|
-- natDynamicTransTable : This table gives information on the active
|
|
-- connections like the inside host IP address and port used, the
|
|
-- translated IP address and port used and the outside host IP
|
|
-- address and port used.
|
|
-- natStaticTable : This table is used for configuring the static mapping
|
|
-- between Local IP Address and Translated Local IP Address on
|
|
-- a particular interface.
|
|
-- natLocalAddressTable : This table is used for listing the local IP address
|
|
-- available in the inside network.
|
|
-- natGlobalAddressTable : This table is used for configuring translated local
|
|
-- IP address which is nothing but global IP address.
|
|
-- natIfTable : This contains information on the outside interface.
|
|
-- NAT, NAPT and TWO WAY NAT on any interface is enabled
|
|
-- through the objects of this table viz natIfNat, natIfNapt
|
|
-- and natIfTwoWayNat respectively. Other statistics for the
|
|
-- particular is also available in this table.
|
|
|
|
|
|
FutureNat-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Counter32, enterprises,
|
|
IpAddress FROM SNMPv2-SMI
|
|
RowStatus, DisplayString, TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC;
|
|
|
|
--enterprises OBJECT IDENTIFIER ::= { private 1 }
|
|
--futuresoftware OBJECT IDENTIFIER ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) }
|
|
|
|
futureNatMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "Super Micro Computer Inc."
|
|
CONTACT-INFO "support@Supermicro.com"
|
|
DESCRIPTION " The natMIB is placed under supermicro MIB branch."
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION " The natMIB is placed under supermicro MIB branch."
|
|
::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(1) 14 }
|
|
|
|
|
|
nat OBJECT IDENTIFIER ::= { futureNatMIB 1 }
|
|
|
|
--nat GROUP
|
|
|
|
-- The Status is an integer value which specificies each feature enable
|
|
|
|
Status ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of each feature of FutureNAT i.e. whether it is enabled or
|
|
not"
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
|
|
natStatInfo OBJECT IDENTIFIER ::= { nat 1 }
|
|
|
|
|
|
-- SCALAR_TABLE_BEGIN natStatInfo
|
|
|
|
natEnable OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or Disables NAT globally."
|
|
DEFVAL { enabled }
|
|
::= { natStatInfo 1 }
|
|
|
|
natTypicalNumberOfEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the initial number of entries in the Dynamic Table for
|
|
which the memory should be alloted at initialisation time.
|
|
When changed dynamically, the updation will occur only at reset."
|
|
DEFVAL { 9000 }
|
|
::= { natStatInfo 2 }
|
|
|
|
natTranslatedLocalPortStart OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gives the start of next free translated local port to be
|
|
used (in case it is set) if NAPT is enabled and a new
|
|
connection arrives at the NAT Router."
|
|
DEFVAL { 6001 }
|
|
::= { natStatInfo 3 }
|
|
|
|
natIdleTimeOut OBJECT-TYPE
|
|
SYNTAX Integer32(60..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time until which a connection can stay idle,
|
|
after which the connection will be terminated. The time is given in
|
|
seconds."
|
|
DEFVAL { 60 }
|
|
::= { natStatInfo 4 }
|
|
natTcpTimeOut OBJECT-TYPE
|
|
SYNTAX Integer32(300..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time the TCP session entry can be present in the
|
|
NAT session table without being used or referred, before being removed from
|
|
the NAT session table. Here time is in seconds."
|
|
DEFVAL { 3600 }
|
|
::= { natStatInfo 5 }
|
|
|
|
natUdpTimeOut OBJECT-TYPE
|
|
SYNTAX Integer32(300..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time the UDP session entry can be present in the
|
|
NAT session table without being used or referred, before being removed from
|
|
the NAT session table. Here time is in seconds."
|
|
DEFVAL { 300 }
|
|
::= { natStatInfo 6 }
|
|
|
|
natTrcFlag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value given enables the respective trace options. Each value of
|
|
the flag corresponds to a certain trace option.
|
|
Flag Value Trace Option
|
|
0 No Trace Flag enabled
|
|
1 Init/Shutdown information
|
|
2 Information of Management functions.
|
|
3 Data Flow
|
|
4 Control Plane
|
|
5 Complete packet dump
|
|
6 Information on Resources used
|
|
7 All failure conditions.
|
|
8 Buffer related information
|
|
>8 All Trace Flags are enabled.
|
|
For example to enable both init/shutdown and data flow trace options
|
|
first enable nat trace with value 1 then enable nat trace with value 3."
|
|
DEFVAL { 0 }
|
|
::= { natStatInfo 7 }
|
|
|
|
natStatDynamicAllocFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives number of times dynamic allocation (malloc) has failed."
|
|
::= { natStatInfo 8 }
|
|
|
|
|
|
natStatTotalNumberOfTranslations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the total number of packets that are translated by NAT
|
|
module on all the interfaces"
|
|
::= { natStatInfo 9 }
|
|
|
|
|
|
natStatTotalNumberOfActiveSessions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the total number of currently active sessions (both UDP and
|
|
TCP) on all interfaces "
|
|
::= { natStatInfo 10 }
|
|
|
|
|
|
natStatTotalNumberOfPktsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gives the total number of packets that have been dropped by the NAT
|
|
module due to various causes ."
|
|
::= { natStatInfo 11 }
|
|
|
|
|
|
natStatTotalNumberOfSessionsClosed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gives the total number of idle sessions that are removed from NAT
|
|
table."
|
|
::= { natStatInfo 12 }
|
|
|
|
natIKEPortTranslation OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to enable or disable IKE port translation feature ."
|
|
DEFVAL { disabled }
|
|
::= { natStatInfo 13 }
|
|
|
|
natIKETimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time the IKE session entry can be present in the
|
|
NAT IKE session table without being used or referred, before being removed from
|
|
the NAT session table. Here time is in seconds."
|
|
DEFVAL { 28800 }
|
|
::= { natStatInfo 14 }
|
|
|
|
natIPSecTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time the IPSec session entry can be present in the
|
|
NAT IPSec session table without being used or referred, before being removed from
|
|
the NAT session table. Here time is in seconds."
|
|
DEFVAL { 28800 }
|
|
::= { natStatInfo 15 }
|
|
|
|
natIPSecPendingTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time the IPSec pending entry can be present in the
|
|
NAT IPSec Pending table without being used or referred, before being removed from the NAT session table. Here time is in seconds."
|
|
DEFVAL { 30 }
|
|
::= { natStatInfo 16 }
|
|
|
|
natIPSecMaxRetry OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to set the maximum number of retries allowed for IPSec session in the pending Table."
|
|
DEFVAL { 3 }
|
|
::= { natStatInfo 17 }
|
|
|
|
sipAlgPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gives the the port to be used for sip signaling."
|
|
DEFVAL { 5060 }
|
|
::= { natStatInfo 18 }
|
|
|
|
natSipAlgPartialEntryTimeOut OBJECT-TYPE
|
|
SYNTAX Integer32(212..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time until which a connection can stay idle,
|
|
after which the connection will be terminated. The time is given in
|
|
seconds."
|
|
DEFVAL { 300 }
|
|
::= { natStatInfo 19 }
|
|
|
|
|
|
|
|
-- SCALAR_TABLE_END nat
|
|
|
|
|
|
-- NAT Dynamic Table, also called as translation table.
|
|
-- dynamic translation entries are created/deleted on the fly.
|
|
-- this table is for monitoring and not for configuration.
|
|
|
|
natDynamicTransTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatDynamicTransEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is a read-only table which gives the IP address and port
|
|
mappings present in the NAT table. This is nothing but the NAT
|
|
translation table. Rows can neither be created nor be deleted using
|
|
the rowstatus column. Rows are automatically created and deleted by
|
|
NAT module. The rowstatus will always hold the value ACTIVE."
|
|
::= { nat 2 }
|
|
|
|
|
|
natDynamicTransEntry OBJECT-TYPE
|
|
SYNTAX NatDynamicTransEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT dynamic table."
|
|
INDEX {
|
|
natDynamicTransInterfaceNum,
|
|
natDynamicTransLocalIp,
|
|
natDynamicTransLocalPort,
|
|
natDynamicTransOutsideIp,
|
|
natDynamicTransOutsidePort
|
|
}
|
|
::= { natDynamicTransTable 1 }
|
|
|
|
|
|
NatDynamicTransEntry ::=
|
|
SEQUENCE {
|
|
natDynamicTransInterfaceNum Integer32,
|
|
natDynamicTransLocalIp IpAddress,
|
|
natDynamicTransTranslatedLocalIp IpAddress,
|
|
natDynamicTransLocalPort Integer32,
|
|
natDynamicTransTranslatedLocalPort Integer32,
|
|
natDynamicTransOutsideIp IpAddress,
|
|
natDynamicTransOutsidePort Integer32,
|
|
natDynamicTransLastUseTime Integer32
|
|
}
|
|
|
|
natDynamicTransInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the global interface number on which the session is going
|
|
on."
|
|
::= { natDynamicTransEntry 1 }
|
|
|
|
natDynamicTransLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the actual IP address of the host connected to inside
|
|
network."
|
|
::= { natDynamicTransEntry 2 }
|
|
|
|
natDynamicTransTranslatedLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the address assigned to the local host by NAT. All the hosts
|
|
from outside will contact the local host through this valid IP
|
|
Address."
|
|
::= { natDynamicTransEntry 3 }
|
|
|
|
natDynamicTransLocalPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the actual source/destination port (UDP/TCP) used by the
|
|
local host for communicating with the outside network."
|
|
::= { natDynamicTransEntry 4 }
|
|
|
|
natDynamicTransTranslatedLocalPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the port number assigned by NAT, when PAT is enabled.
|
|
Otherwise the original port number is retained."
|
|
::= { natDynamicTransEntry 5 }
|
|
|
|
natDynamicTransOutsideIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the IP address of the outside host which the above stated
|
|
Local host is contacting."
|
|
::= { natDynamicTransEntry 6 }
|
|
|
|
natDynamicTransOutsidePort OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the port number of the outside host on which it is being
|
|
contacted."
|
|
::= { natDynamicTransEntry 7 }
|
|
|
|
natDynamicTransLastUseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the amount of time (in seconds) for which the above particular
|
|
connection has remained idle."
|
|
::= { natDynamicTransEntry 8 }
|
|
|
|
|
|
-- NAT global IP address table. To list the global IP addresses obtained
|
|
-- from IANA.
|
|
|
|
natGlobalAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatGlobalAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration table is used to list all the global IP addresses
|
|
obtained from InterNIC and which can be used by NAT module for
|
|
translation."
|
|
::= { nat 3 }
|
|
|
|
|
|
natGlobalAddressEntry OBJECT-TYPE
|
|
SYNTAX NatGlobalAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT global IP address table."
|
|
INDEX {
|
|
natGlobalAddressInterfaceNum,
|
|
natGlobalAddressTranslatedLocalIp
|
|
}
|
|
::= { natGlobalAddressTable 1 }
|
|
|
|
NatGlobalAddressEntry ::=
|
|
SEQUENCE {
|
|
natGlobalAddressInterfaceNum Integer32,
|
|
natGlobalAddressTranslatedLocalIp IpAddress,
|
|
natGlobalAddressMask IpAddress,
|
|
natGlobalAddressEntryStatus RowStatus
|
|
}
|
|
|
|
natGlobalAddressInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the interface number on which the global IP address given
|
|
below should be used for local IP address translation."
|
|
::= { natGlobalAddressEntry 1 }
|
|
|
|
natGlobalAddressTranslatedLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address network number obtained from the IANA which can
|
|
be used by NAT for translating the local IP addresses whose packets are
|
|
going on the corresponding interface number given by
|
|
natGlobalAddressInterfaceNum."
|
|
::= { natGlobalAddressEntry 2 }
|
|
|
|
natGlobalAddressMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This when applied on the natGlobalAddressTranslatedLocalIp gives the
|
|
range of global IP Addresses that can be used by the NAT module to
|
|
translate the local IP Address whose packets are transmitted on the
|
|
given interface number."
|
|
::= { natGlobalAddressEntry 3 }
|
|
|
|
natGlobalAddressEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2
|
|
standard. "
|
|
::= { natGlobalAddressEntry 4 }
|
|
|
|
|
|
-- NAT Local Range Table - To configure the IP addresses which need translation.
|
|
|
|
natLocalAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatLocalAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is also a configuration table. The user has to configure
|
|
Interfaces, which are connected to inside network and the IP address
|
|
ranges, which needs address translations. All the interfaces which are
|
|
not given in this table are considered as GLOBAL interfaces (interfaces
|
|
connected to outside network)."
|
|
::= { nat 4 }
|
|
|
|
natLocalAddressEntry OBJECT-TYPE
|
|
SYNTAX NatLocalAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT local IP address range specification table."
|
|
INDEX {
|
|
natLocalAddressInterfaceNumber,
|
|
natLocalAddressLocalIp
|
|
}
|
|
::= { natLocalAddressTable 1 }
|
|
|
|
|
|
NatLocalAddressEntry ::=
|
|
SEQUENCE {
|
|
natLocalAddressInterfaceNumber Integer32,
|
|
natLocalAddressLocalIp IpAddress,
|
|
natLocalAddressMask IpAddress,
|
|
natLocalAddressEntryStatus RowStatus
|
|
}
|
|
|
|
natLocalAddressInterfaceNumber OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the interface number which is connected to inside network
|
|
containing the given below Local IP addresses."
|
|
::= { natLocalAddressEntry 1 }
|
|
|
|
|
|
natLocalAddressLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the network number of the local host needing translation."
|
|
::= { natLocalAddressEntry 2 }
|
|
|
|
natLocalAddressMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mask when anded with the above local IP gives the range of Local
|
|
host that can contact outside ."
|
|
::= { natLocalAddressEntry 3 }
|
|
|
|
natLocalAddressEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2
|
|
standard. "
|
|
::= { natLocalAddressEntry 4 }
|
|
|
|
|
|
-- NAT Static address assignment table
|
|
|
|
natStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is a configurable table in which the static IP address
|
|
mapping between the LOCAL IP address and GLOBAL IP address is
|
|
configured."
|
|
::= { nat 5 }
|
|
|
|
natStaticEntry OBJECT-TYPE
|
|
SYNTAX NatStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT static configuration table."
|
|
INDEX {
|
|
natStaticInterfaceNum,
|
|
natStaticLocalIp
|
|
}
|
|
::= { natStaticTable 1 }
|
|
|
|
|
|
NatStaticEntry ::=
|
|
SEQUENCE {
|
|
natStaticInterfaceNum Integer32,
|
|
natStaticLocalIp IpAddress,
|
|
natStaticTranslatedLocalIp IpAddress,
|
|
natStaticEntryStatus RowStatus
|
|
}
|
|
|
|
natStaticInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local host listed below will use the corresponding global IP if it
|
|
sends packets on this interface."
|
|
::= { natStaticEntry 1 }
|
|
|
|
natStaticLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address of the host present in the inside network."
|
|
::= { natStaticEntry 2 }
|
|
|
|
|
|
natStaticTranslatedLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address that should be used in the packets going out
|
|
from the given InsideLocalIp host to the outside network. In the
|
|
opposite direction this mapping will be used along with the NAT entry
|
|
to reverse translation. This global IP will not be used by any other
|
|
host."
|
|
::= { natStaticEntry 3 }
|
|
|
|
natStaticEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2
|
|
standard. "
|
|
::= { natStaticEntry 4 }
|
|
|
|
|
|
-- NAT Static NAPT assignment table
|
|
|
|
natStaticNaptTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatStaticNaptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is a configurable table in which the static IP address
|
|
and Port mapping between the Local IP address, Local Port and Global
|
|
IP address, Global Port is configured."
|
|
::= { nat 6 }
|
|
|
|
natStaticNaptEntry OBJECT-TYPE
|
|
SYNTAX NatStaticNaptEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT StaticNapt configuration table."
|
|
INDEX {
|
|
natStaticNaptInterfaceNum,
|
|
natStaticNaptLocalIp,
|
|
natStaticNaptStartLocalPort,
|
|
natStaticNaptEndLocalPort,
|
|
natStaticNaptProtocolNumber
|
|
}
|
|
::= { natStaticNaptTable 1 }
|
|
|
|
|
|
NatStaticNaptEntry ::=
|
|
SEQUENCE {
|
|
natStaticNaptInterfaceNum Integer32,
|
|
natStaticNaptLocalIp IpAddress,
|
|
natStaticNaptStartLocalPort Integer32,
|
|
natStaticNaptEndLocalPort Integer32,
|
|
natStaticNaptProtocolNumber INTEGER,
|
|
natStaticNaptTranslatedLocalIp IpAddress,
|
|
natStaticNaptTranslatedLocalPort Integer32,
|
|
natStaticNaptDescription DisplayString,
|
|
natStaticNaptEntryStatus RowStatus
|
|
}
|
|
|
|
natStaticNaptInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local host with the local port listed below will use the
|
|
corresponding global IP and global port if it
|
|
sends packets on this interface."
|
|
::= { natStaticNaptEntry 1 }
|
|
|
|
natStaticNaptLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address of the host present in the inside network."
|
|
::= { natStaticNaptEntry 2 }
|
|
|
|
natStaticNaptStartLocalPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the start Port of the host present in the inside network."
|
|
::= { natStaticNaptEntry 3 }
|
|
|
|
natStaticNaptEndLocalPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the End Port of the host present in the inside network."
|
|
::= { natStaticNaptEntry 4 }
|
|
|
|
natStaticNaptProtocolNumber OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcp(6),
|
|
udp(17),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is protocol number which is to be allowed"
|
|
::= { natStaticNaptEntry 5 }
|
|
|
|
natStaticNaptTranslatedLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address that should be used in the packets going out
|
|
from the given InsideLocalIp host to the outside network. In the
|
|
opposite direction this mapping will be used along with the NAT entry
|
|
to reverse translation."
|
|
::= { natStaticNaptEntry 6 }
|
|
|
|
natStaticNaptTranslatedLocalPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Port that should be used in the packets going out
|
|
from the given InsideLocalIp host to the outside network. In the
|
|
opposite direction this mapping will be used along with the NAT entry
|
|
to reverse translation. "
|
|
::= { natStaticNaptEntry 7 }
|
|
|
|
natStaticNaptDescription OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the description of the entry given by the user at the time
|
|
of configuration"
|
|
::= { natStaticNaptEntry 8 }
|
|
|
|
natStaticNaptEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2
|
|
standard. "
|
|
::= { natStaticNaptEntry 9 }
|
|
|
|
--nat interface table
|
|
--defines the operation flags
|
|
|
|
natIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tables gives the interface number on which NAT,NAPT,TWICE NAT and
|
|
TWO WAY NAT are enabled."
|
|
::= { nat 7 }
|
|
|
|
natIfEntry OBJECT-TYPE
|
|
SYNTAX NatIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT Interface table."
|
|
INDEX {
|
|
natIfInterfaceNumber
|
|
}
|
|
::= { natIfTable 1 }
|
|
|
|
NatIfEntry ::=
|
|
SEQUENCE {
|
|
natIfInterfaceNumber Integer32,
|
|
natIfNat Status,
|
|
natIfNapt Status,
|
|
natIfTwoWayNat Status,
|
|
natIfEntryStatus RowStatus
|
|
}
|
|
|
|
natIfInterfaceNumber OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the global interface number on which the following features
|
|
can be enabled."
|
|
::= { natIfEntry 1 }
|
|
|
|
natIfNat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enables NAT on interface number given by natIfInterfaceNumber. Only
|
|
the inside host can initiate connections. Translation will be done on
|
|
outbound packets only. This object can be enabled only after
|
|
natGlobalAddressTable and natLocalAddressTable are configured."
|
|
DEFVAL { disabled }
|
|
::= { natIfEntry 2 }
|
|
|
|
natIfNapt OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enables port translation on interface number given by
|
|
natIfInterfaceNumber. If this feature is enabled, then the same global IP
|
|
address is overloaded and can be used for many local host by translating
|
|
the port number. natIfNat gets enabled when this object is enabled and
|
|
natIfNat cannot be disabled when natIfNapt is enabled."
|
|
DEFVAL { disabled }
|
|
::= { natIfEntry 3 }
|
|
|
|
natIfTwoWayNat OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This enables NAT on both sides. That is the connection can be initiated
|
|
from the inside host as well as from the outside host. Translation will
|
|
be done on both INBOUND and OUTBOUND packets"
|
|
DEFVAL { disabled }
|
|
::= { natIfEntry 4 }
|
|
|
|
|
|
natIfEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2
|
|
standard. "
|
|
::= { natIfEntry 5 }
|
|
|
|
-- NAT IPSec Session Table
|
|
-- The Session translation entries are created/deleted on the fly.
|
|
-- this table is for monitoring and not for configuration.
|
|
|
|
natIPSecSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatIPSecSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table gives the IP address and SPI
|
|
mappings present in the NAT table. This is nothing but the NAT
|
|
translation table for the IPSec Traffic. Rows are automatically
|
|
created and deleted by NAT module.
|
|
User can also delete rows using Rowstatus field."
|
|
::= { nat 8 }
|
|
|
|
|
|
natIPSecSessionEntry OBJECT-TYPE
|
|
SYNTAX NatIPSecSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT IPSec Session table."
|
|
INDEX {
|
|
natIPSecSessionInterfaceNum,
|
|
natIPSecSessionLocalIp,
|
|
natIPSecSessionOutsideIp,
|
|
natIPSecSessionSPIInside,
|
|
natIPSecSessionSPIOutside
|
|
}
|
|
::= { natIPSecSessionTable 1 }
|
|
|
|
NatIPSecSessionEntry ::=
|
|
SEQUENCE {
|
|
natIPSecSessionInterfaceNum Integer32,
|
|
natIPSecSessionLocalIp IpAddress,
|
|
natIPSecSessionTranslatedLocalIp IpAddress,
|
|
natIPSecSessionOutsideIp IpAddress,
|
|
natIPSecSessionSPIInside Integer32,
|
|
natIPSecSessionSPIOutside Integer32,
|
|
natIPSecSessionLastUseTime Integer32,
|
|
natIPSecSessionEntryStatus RowStatus
|
|
}
|
|
|
|
natIPSecSessionInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the interface number on which the session is going on."
|
|
::= { natIPSecSessionEntry 1 }
|
|
|
|
natIPSecSessionLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the actual IP address of the host connected to inside network."
|
|
::= { natIPSecSessionEntry 2 }
|
|
|
|
natIPSecSessionTranslatedLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the address assigned to the local host by NAT. All the hosts from outside will contact the local host through this valid IP Address."
|
|
::= { natIPSecSessionEntry 3 }
|
|
|
|
natIPSecSessionOutsideIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the IP address of the outside host, which the above stated Local host is contacting."
|
|
::= { natIPSecSessionEntry 4 }
|
|
|
|
natIPSecSessionSPIInside OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the SPI of the host connected to inside network. "
|
|
::= { natIPSecSessionEntry 5 }
|
|
|
|
natIPSecSessionSPIOutside OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the SPI of the host connected to outside network."
|
|
::= { natIPSecSessionEntry 6 }
|
|
|
|
natIPSecSessionLastUseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the last time the session was accessed"
|
|
::= { natIPSecSessionEntry 7 }
|
|
|
|
natIPSecSessionEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2 standard."
|
|
::= { natIPSecSessionEntry 8 }
|
|
|
|
|
|
-- NAT IPSec Pending Table
|
|
-- The Pending translation entries are created/deleted on the fly.
|
|
-- this table is for monitoring and not for configuration.
|
|
|
|
natIPSecPendingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatIPSecPendingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table gives the IP address and SPI mappings present in the Pending
|
|
Table of NAT for IPSec Traffic.
|
|
Rows are automatically created and deleted by NAT module. User can delete using RowStatus Field "
|
|
::= { nat 9 }
|
|
|
|
natIPSecPendingEntry OBJECT-TYPE
|
|
SYNTAX NatIPSecPendingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT IPSec Pending table."
|
|
INDEX {
|
|
natIPSecPendingInterfaceNum,
|
|
natIPSecPendingLocalIp,
|
|
natIPSecPendingOutsideIp,
|
|
natIPSecPendingSPIInside,
|
|
natIPSecPendingSPIOutside
|
|
}
|
|
::= { natIPSecPendingTable 1 }
|
|
|
|
NatIPSecPendingEntry ::=
|
|
SEQUENCE {
|
|
natIPSecPendingInterfaceNum Integer32,
|
|
natIPSecPendingLocalIp IpAddress,
|
|
natIPSecPendingTranslatedLocalIp IpAddress,
|
|
natIPSecPendingOutsideIp IpAddress,
|
|
natIPSecPendingSPIInside Integer32,
|
|
natIPSecPendingSPIOutside Integer32,
|
|
natIPSecPendingLastUseTime Integer32,
|
|
natIPSecPendingNoOfRetry Integer32,
|
|
natIPSecPendingEntryStatus RowStatus
|
|
}
|
|
|
|
natIPSecPendingInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the interface number on which the session is going on."
|
|
::= { natIPSecPendingEntry 1 }
|
|
|
|
natIPSecPendingLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the actual IP address of the host connected to inside network."
|
|
::= { natIPSecPendingEntry 2 }
|
|
|
|
natIPSecPendingTranslatedLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the address assigned to the local host by NAT. All the hosts from outside will contact the local host through this valid IP Address."
|
|
::= { natIPSecPendingEntry 3 }
|
|
|
|
natIPSecPendingOutsideIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the IP address of the outside host, which the above stated Local host is contacting."
|
|
::= { natIPSecPendingEntry 4 }
|
|
|
|
natIPSecPendingSPIInside OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the SPI of the host connected to inside network."
|
|
::= { natIPSecPendingEntry 5 }
|
|
|
|
natIPSecPendingSPIOutside OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the SPI of the host connected to outside network."
|
|
::= { natIPSecPendingEntry 6 }
|
|
|
|
natIPSecPendingLastUseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the last time the session was accessed."
|
|
::= { natIPSecPendingEntry 7 }
|
|
|
|
natIPSecPendingNoOfRetry OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the number of retry count"
|
|
::= { natIPSecPendingEntry 8 }
|
|
|
|
natIPSecPendingEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2 standard."
|
|
::= { natIPSecPendingEntry 9 }
|
|
|
|
-- NAT IKE Session Table
|
|
-- The IKE session translation entries are created/deleted on the fly.
|
|
-- this table is for monitoring and not for configuration.
|
|
-- User can delete row using RowStatus Field
|
|
|
|
natIKESessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatIKESessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table gives the IP address and Cookie mappings present
|
|
in the IKE session Table of NAT . Rows are automatically created
|
|
and deleted by NAT module. User can also delete row using RowStatus Field"
|
|
::= { nat 10 }
|
|
|
|
natIKESessionEntry OBJECT-TYPE
|
|
SYNTAX NatIKESessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT IKE Session table."
|
|
INDEX {
|
|
natIKESessionInterfaceNum,
|
|
natIKESessionLocalIp,
|
|
natIKESessionOutsideIp,
|
|
natIKESessionInitCookie
|
|
}
|
|
::= { natIKESessionTable 1 }
|
|
|
|
NatIKESessionEntry ::=
|
|
SEQUENCE {
|
|
natIKESessionInterfaceNum Integer32,
|
|
natIKESessionLocalIp IpAddress,
|
|
natIKESessionTranslatedLocalIp IpAddress,
|
|
natIKESessionOutsideIp IpAddress,
|
|
natIKESessionInitCookie OCTET STRING,
|
|
natIKESessionLastUseTime Integer32,
|
|
natIKESessionEntryStatus RowStatus
|
|
}
|
|
|
|
natIKESessionInterfaceNum OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the interface number on which the session is going on."
|
|
::= { natIKESessionEntry 1 }
|
|
|
|
natIKESessionLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the actual IP address of the host connected to inside network."
|
|
::= { natIKESessionEntry 2 }
|
|
|
|
natIKESessionTranslatedLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the address assigned to the local host by NAT. All the hosts from outside will contact the local host through this valid IP Address."
|
|
::= { natIKESessionEntry 3 }
|
|
|
|
natIKESessionOutsideIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the IP address of the outside host, which the above stated Local host is contacting."
|
|
::= { natIKESessionEntry 4 }
|
|
|
|
natIKESessionInitCookie OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..100))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the Cookie information of the initiator of the session."
|
|
::= { natIKESessionEntry 5 }
|
|
|
|
natIKESessionLastUseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the last time the session was accessed"
|
|
::= { natIKESessionEntry 6 }
|
|
|
|
natIKESessionEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2 standard."
|
|
::= { natIKESessionEntry 7 }
|
|
|
|
-- NAT Port Trigger Table
|
|
-- Port trigger entries are created/deleted on the fly.
|
|
-- User can delete row using RowStatus Field
|
|
|
|
natPortTrigInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatPortTrigInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table gives the port trigger information of the nat module.
|
|
Rows are automatically created/deleted on the fly by the user.
|
|
User can also delete row using RowStatus Field"
|
|
::= { nat 11 }
|
|
|
|
natPortTrigInfoEntry OBJECT-TYPE
|
|
SYNTAX NatPortTrigInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the NAT Port trigger Info Table."
|
|
|
|
INDEX {
|
|
natPortTrigInfoInBoundPortRange,
|
|
natPortTrigInfoOutBoundPortRange,
|
|
natPortTrigInfoProtocol
|
|
}
|
|
::= { natPortTrigInfoTable 1 }
|
|
|
|
NatPortTrigInfoEntry ::=
|
|
SEQUENCE {
|
|
|
|
natPortTrigInfoAppName DisplayString,
|
|
natPortTrigInfoInBoundPortRange DisplayString,
|
|
natPortTrigInfoOutBoundPortRange DisplayString,
|
|
natPortTrigInfoProtocol INTEGER,
|
|
natPortTrigInfoEntryStatus RowStatus
|
|
|
|
}
|
|
|
|
natPortTrigInfoAppName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the application name using the port trigger feature."
|
|
::= { natPortTrigInfoEntry 1 }
|
|
|
|
natPortTrigInfoInBoundPortRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..11))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the Inbound port-range through which the outside host
|
|
initiates the connection"
|
|
::= { natPortTrigInfoEntry 2 }
|
|
|
|
natPortTrigInfoOutBoundPortRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..11))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the Out-bound port-range through which the inside host
|
|
initiates the connection"
|
|
::= { natPortTrigInfoEntry 3 }
|
|
|
|
natPortTrigInfoProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcp(6),
|
|
udp(17),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the protocol (TCP/UDP/ANY) in the port trigger feature"
|
|
::= { natPortTrigInfoEntry 4 }
|
|
|
|
natPortTrigInfoEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP V2
|
|
standard. "
|
|
::= { natPortTrigInfoEntry 5 }
|
|
|
|
-- Policy Based NAT Table
|
|
|
|
natPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a configurable table in which the
|
|
mapping between the nat policy filter, identifier and global IP address
|
|
is configured. The filter identifies the traffic by specifying the
|
|
source, destination addresses and port information.
|
|
Regular NAT uses source addresses and ports only for address
|
|
translation, whereas Policy-based NAT uses both source and destination addresses
|
|
and port."
|
|
::= { nat 12 }
|
|
|
|
natPolicyEntry OBJECT-TYPE
|
|
SYNTAX NatPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Policy NAT configuration table."
|
|
INDEX {
|
|
natPolicyType,
|
|
natPolicyId,
|
|
natPolicyAclName
|
|
}
|
|
::= { natPolicyTable 1 }
|
|
|
|
|
|
NatPolicyEntry ::=
|
|
SEQUENCE {
|
|
natPolicyType INTEGER,
|
|
natPolicyId Integer32,
|
|
natPolicyAclName OCTET STRING,
|
|
natPolicyTranslatedIp IpAddress,
|
|
natPolicyEntryStatus RowStatus
|
|
}
|
|
|
|
natPolicyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static (1),
|
|
dynamic (2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the type of Policy NAT. It can be either static Policy NAT or
|
|
dynamic policy NAT. For policy static NAT the number of global IP addresses
|
|
should be equivalent to the number of local addresses. Dynamic policy NAT
|
|
supports many to one mapping of multiple local addresses to one global address.
|
|
Overlapping addresses are allowed for dynamic policy NAT."
|
|
::= { natPolicyEntry 1 }
|
|
|
|
|
|
natPolicyId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, that identifies each NAT Policy binding."
|
|
::= { natPolicyEntry 2 }
|
|
|
|
natPolicyAclName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..35))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Policy nat filter rule identifier that uniquely identifies
|
|
a filter in the filter table.
|
|
The administrator is expected to delete the NAT policy before removing
|
|
the filter from the filter database. This way no check needs to be added
|
|
when filter is deleted."
|
|
::= { natPolicyEntry 3 }
|
|
|
|
|
|
natPolicyTranslatedIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the IP address that should be used in the packets going out
|
|
from the given InsideLocalIp host to the outside network.
|
|
(as defined by the Policy rule identified by the filterID).
|
|
In the opposite direction this mapping will be
|
|
used along with the NAT entry for reverse translation.
|
|
This global IP will not be used by any other host."
|
|
::= { natPolicyEntry 4 }
|
|
|
|
natPolicyEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the entry can be used as specified in the SNMP standard."
|
|
::= { natPolicyEntry 5 }
|
|
|
|
-- NAT Reserved Port Trigger Table
|
|
-- Reserved Port trigger entries are created/deleted on the fly.
|
|
|
|
natRsvdPortTrigInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NatRsvdPortTrigInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is a read-only table which gives the reserved port trigger
|
|
information of the NAT module. Rows can neither be created nor be deleted
|
|
using the rowstatus column. Rows are automatically created and deleted
|
|
by NAT module. Port triggering is an important feature in NAT in which
|
|
outbound traffic on predetermined ports ('triggering ports') causes inbound
|
|
traffic on specific incoming ports to be dynamically forwarded to the
|
|
initiating host. Reserved port Trigger table maintains the
|
|
active port trigger session entries."
|
|
::= { nat 13 }
|
|
|
|
natRsvdPortTrigInfoEntry OBJECT-TYPE
|
|
SYNTAX NatRsvdPortTrigInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Reserved NAT Port trigger Info Table."
|
|
|
|
INDEX {
|
|
natRsvdPortTrigInfoAppIndex
|
|
}
|
|
::= { natRsvdPortTrigInfoTable 1 }
|
|
|
|
NatRsvdPortTrigInfoEntry ::=
|
|
SEQUENCE {
|
|
natRsvdPortTrigInfoAppIndex Integer32,
|
|
natRsvdPortTrigInfoLocalIp IpAddress,
|
|
natRsvdPortTrigInfoRemoteIp IpAddress,
|
|
natRsvdPortTrigInfoStartTime TimeStamp,
|
|
natRsvdPortTrigInfoAppName DisplayString,
|
|
natRsvdPortTrigInfoInBoundPortRange DisplayString,
|
|
natRsvdPortTrigInfoOutBoundPortRange DisplayString,
|
|
natRsvdPortTrigInfoProtocol INTEGER
|
|
|
|
|
|
}
|
|
|
|
natRsvdPortTrigInfoAppIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..31)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the application index that uses the port trigger feature."
|
|
::= { natRsvdPortTrigInfoEntry 1 }
|
|
|
|
natRsvdPortTrigInfoLocalIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates Local IP Address of the reserved port trigger session."
|
|
DEFVAL { "" }
|
|
::= { natRsvdPortTrigInfoEntry 2 }
|
|
|
|
natRsvdPortTrigInfoRemoteIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the remote IP address of the reserved port trigger session."
|
|
DEFVAL { "" }
|
|
::= { natRsvdPortTrigInfoEntry 3 }
|
|
|
|
natRsvdPortTrigInfoStartTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the time by which the reserved port trigger session
|
|
has been established."
|
|
DEFVAL { 0 }
|
|
::= { natRsvdPortTrigInfoEntry 4 }
|
|
|
|
natRsvdPortTrigInfoAppName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the application name using the port trigger feature."
|
|
DEFVAL { "" }
|
|
::= { natRsvdPortTrigInfoEntry 5 }
|
|
|
|
natRsvdPortTrigInfoInBoundPortRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the Inbound port-range through which the outside host
|
|
initiates the connection"
|
|
DEFVAL { "" }
|
|
::= { natRsvdPortTrigInfoEntry 6 }
|
|
|
|
natRsvdPortTrigInfoOutBoundPortRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..11))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the Out-bound port-range through which the inside host
|
|
initiates the connection"
|
|
DEFVAL { "" }
|
|
::= { natRsvdPortTrigInfoEntry 7 }
|
|
|
|
natRsvdPortTrigInfoProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcp(6),
|
|
udp(17),
|
|
any(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This gives the protocol (TCP/UDP/ANY) in the port trigger feature"
|
|
DEFVAL { any }
|
|
::= { natRsvdPortTrigInfoEntry 8 }
|
|
END
|
|
|
|
|
|
|