WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/siemens/SN-MSPS-SCX-MIB

42821 lines
1.5 MiB
Raw Permalink Blame History

-- Automatically generated by MIB Converter ...
-- ----------------------------------------------------------------------
-- scalance_x_msps.mib
-- SIMATIC NET Industrial Ethernet Scalance
-- MSPS Private MIB
-- Copyright (c) 2012 Siemens AG
-- ----------------------------------------------------------------------
--
-- MIB Module : SN-MSPS-SCX-MIB
--
-- Revision : V06.02.02
-- Date : 2019-03-14 15:50:06
--
-- ----------------------------------------------------------------------
SN-MSPS-SCX-MIB DEFINITIONS ::= BEGIN
IMPORTS
ospfv3RouterId,
ospfv3RestartStatus,
ospfv3RestartInterval,
ospfv3RestartExitReason,
ospfv3NbrRestartHelperStatus,
ospfv3NbrRestartHelperAge,
ospfv3NbrRestartHelperExitReason,
ospfv3VirtNbrRestartHelperStatus,
ospfv3VirtNbrRestartHelperAge,
ospfv3VirtNbrRestartHelperExitReason FROM OSPFV3-MIB
DisplayString FROM RFC1213-MIB
vrrpOperEntry FROM VRRP-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
enterprises FROM RFC1155-SMI
PaeControlledPortStatus FROM IEEE8021-PAE-MIB
BridgeId,
Timeout FROM BRIDGE-MIB
TRAP-TYPE FROM RFC-1215
InterfaceIndex,
ifIndex,
InterfaceIndexOrZero FROM IF-MIB
InetAddress,
InetAddressType,
InetAddressPrefixLength,
InetAddressIPv4,
InetPortNumber,
InetVersion,
InetZoneIndex,
InetAutonomousSystemNumber,
InetScopeType FROM INET-ADDRESS-MIB
ospfVirtNbrEntry,
AreaID,
RouterID,
BigMetric,
Status,
PositiveInteger,
TOSType,
ospfRouterId,
ospfNbrRtrId FROM OSPF-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
EnabledStatus FROM P-BRIDGE-MIB
Counter32,
Integer32,
Unsigned32,
enterprises,
OBJECT-TYPE,
OBJECT-IDENTITY,
NOTIFICATION-TYPE,
MODULE-IDENTITY,
TimeTicks,
IpAddress,
Gauge32,
Counter64,
mib-2 FROM SNMPv2-SMI
PortList,
VlanId,
dot1qVlanIndex,
dot1qStaticUnicastEntry,
dot1qTpFdbEntry,
dot1qFdbEntry,
dot1qFdbId,
dot1qStaticUnicastAddress,
dot1qStaticUnicastReceivePort,
dot1qStaticMulticastAddress,
dot1qStaticMulticastReceivePort,
VlanIdOrNone,
dot1qVlanStaticEntry,
VlanIndex FROM Q-BRIDGE-MIB
pethPsePortEntry,
pethMainPseEntry FROM POWER-ETHERNET-MIB
vrrpv3OperationsVrId,
vrrpv3OperationsInetAddrType FROM VRRPV3-MIB
RowStatus,
DateAndTime,
MacAddress,
TruthValue,
DisplayString,
TEXTUAL-CONVENTION,
StorageType,
TimeStamp FROM SNMPv2-TC
IANAipRouteProtocol,
IANAipMRouteProtocol FROM IANA-RTPROTO-MIB
OBJECT-TYPE FROM RFC-1212;
org OBJECT IDENTIFIER ::= { iso 3}
dod OBJECT IDENTIFIER ::= { org 6}
internet OBJECT IDENTIFIER ::= { dod 1}
private OBJECT IDENTIFIER ::= { internet 4}
enterprises OBJECT IDENTIFIER ::= { private 1}
siemens OBJECT IDENTIFIER ::= { enterprises 4329}
industrialComProducts OBJECT IDENTIFIER ::= { siemens 20}
iComPlatforms OBJECT IDENTIFIER ::= { industrialComProducts 1}
simaticNet OBJECT IDENTIFIER ::= { iComPlatforms 1}
snMsps OBJECT IDENTIFIER ::= { simaticNet 1}
snMspsCommon OBJECT IDENTIFIER ::= { snMsps 1}
snMspsModules OBJECT IDENTIFIER ::= { snMsps 3}
snMspsTrapPrefix OBJECT IDENTIFIER ::= { snMsps 0}
snMspsAcl OBJECT IDENTIFIER ::= { snMspsCommon 30}
snMspsCableTester OBJECT IDENTIFIER ::= { snMspsCommon 44}
snMspsConfig OBJECT IDENTIFIER ::= { snMspsCommon 1}
snMspsCplug OBJECT IDENTIFIER ::= { snMspsCommon 23}
snMspsDas OBJECT IDENTIFIER ::= { snMspsCommon 83}
snMspsDhcp OBJECT IDENTIFIER ::= { snMspsCommon 17}
snMspsDiagnostics OBJECT IDENTIFIER ::= { snMspsCommon 79}
snMspsDns OBJECT IDENTIFIER ::= { snMspsCommon 49}
snMspsDot1ad OBJECT IDENTIFIER ::= { snMspsCommon 81}
snMspsDst OBJECT IDENTIFIER ::= { snMspsCommon 54}
snMspsEthernetIp OBJECT IDENTIFIER ::= { snMspsCommon 62}
snMspsGeneral OBJECT IDENTIFIER ::= { snMspsCommon 2}
snMspsGuestVlan OBJECT IDENTIFIER ::= { snMspsCommon 55}
snMspsHttp OBJECT IDENTIFIER ::= { snMspsCommon 20}
snMspsIf OBJECT IDENTIFIER ::= { snMspsCommon 34}
snMspsIp OBJECT IDENTIFIER ::= { snMspsCommon 13}
snMspsIp6 OBJECT IDENTIFIER ::= { snMspsCommon 65}
snMspsIpACD OBJECT IDENTIFIER ::= { snMspsCommon 63}
snMspsKeyPlug OBJECT IDENTIFIER ::= { snMspsCommon 35}
snMspsLa OBJECT IDENTIFIER ::= { snMspsCommon 5}
snMspsLinkCheck OBJECT IDENTIFIER ::= { snMspsCommon 82}
snMspsLoadSave OBJECT IDENTIFIER ::= { snMspsCommon 26}
snMspsLog OBJECT IDENTIFIER ::= { snMspsCommon 31}
snMspsLoopDetection OBJECT IDENTIFIER ::= { snMspsCommon 36}
snMspsMacAuth OBJECT IDENTIFIER ::= { snMspsCommon 56}
snMspsMgmdMIB OBJECT IDENTIFIER ::= { snMspsCommon 77}
snMspsMsdpMIB OBJECT IDENTIFIER ::= { snMspsCommon 78}
snMspsMstp OBJECT IDENTIFIER ::= { snMspsCommon 6}
snMspsNatv2 OBJECT IDENTIFIER ::= { snMspsCommon 75}
snMspsNfc OBJECT IDENTIFIER ::= { snMspsCommon 57}
snMspsNtp OBJECT IDENTIFIER ::= { snMspsCommon 33}
snMspsOspf OBJECT IDENTIFIER ::= { snMspsCommon 42}
snMspsOspf3 OBJECT IDENTIFIER ::= { snMspsCommon 66}
snMspsPimMIB OBJECT IDENTIFIER ::= { snMspsCommon 76}
snMspsPnac OBJECT IDENTIFIER ::= { snMspsCommon 10}
snMspsPnio OBJECT IDENTIFIER ::= { snMspsCommon 32}
snMspsPoe OBJECT IDENTIFIER ::= { snMspsCommon 38}
snMspsPort OBJECT IDENTIFIER ::= { snMspsCommon 29}
snMspsPtp OBJECT IDENTIFIER ::= { snMspsCommon 37}
snMspsQos OBJECT IDENTIFIER ::= { snMspsCommon 22}
snMspsRadius OBJECT IDENTIFIER ::= { snMspsCommon 11}
snMspsRedundancy OBJECT IDENTIFIER ::= { snMspsCommon 24}
snMspsReport OBJECT IDENTIFIER ::= { snMspsCommon 28}
snMspsRip OBJECT IDENTIFIER ::= { snMspsCommon 41}
snMspsRip6 OBJECT IDENTIFIER ::= { snMspsCommon 67}
snMspsRmon OBJECT IDENTIFIER ::= { snMspsCommon 12}
snMspsRouteMap OBJECT IDENTIFIER ::= { snMspsCommon 53}
snMspsSfp OBJECT IDENTIFIER ::= { snMspsCommon 46}
snMspsSinema OBJECT IDENTIFIER ::= { snMspsCommon 25}
snMspsSnmp OBJECT IDENTIFIER ::= { snMspsCommon 4}
snMspsSnooping OBJECT IDENTIFIER ::= { snMspsCommon 9}
snMspsSntp OBJECT IDENTIFIER ::= { snMspsCommon 19}
snMspsSyslog OBJECT IDENTIFIER ::= { snMspsCommon 21}
snMspsTc OBJECT IDENTIFIER ::= { snMspsModules 1}
snMspsVlan OBJECT IDENTIFIER ::= { snMspsCommon 3}
snMspsVrrp OBJECT IDENTIFIER ::= { snMspsCommon 43}
snMspsVrrpv3 OBJECT IDENTIFIER ::= { snMspsCommon 59}
snMspsDNSClient OBJECT IDENTIFIER ::= { snMspsDns 3}
snMspsDhcpClient OBJECT IDENTIFIER ::= { snMspsDhcp 1}
snMspsDhcpClient6 OBJECT IDENTIFIER ::= { snMspsDhcp 4}
snMspsDhcpRelay OBJECT IDENTIFIER ::= { snMspsDhcp 3}
snMspsDhcpRelay6 OBJECT IDENTIFIER ::= { snMspsDhcp 6}
snMspsDhcpServer OBJECT IDENTIFIER ::= { snMspsDhcp 2}
snMspsQosCos OBJECT IDENTIFIER ::= { snMspsQos 3}
snMspsQosDscp OBJECT IDENTIFIER ::= { snMspsQos 4}
snMspsRadiusServer OBJECT IDENTIFIER ::= { snMspsRadius 2}
snMspsRedundancyExt OBJECT IDENTIFIER ::= { snMspsRedundancy 4}
snMspsRingRedundancy OBJECT IDENTIFIER ::= { snMspsRedundancy 1}
snMspsRingRedundancyMrpIntercon OBJECT IDENTIFIER ::= { snMspsRedundancy 5}
snMspsRingRedundancyObserver OBJECT IDENTIFIER ::= { snMspsRedundancy 3}
snMspsRingRedundancyStandby OBJECT IDENTIFIER ::= { snMspsRedundancy 2}
snMspsSntpClient OBJECT IDENTIFIER ::= { snMspsSntp 1}
snMspsSyslogClient OBJECT IDENTIFIER ::= { snMspsSyslog 1}
SnMspsOrderNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The format of type identification / order
numbers of Siemens MSPS products."
SYNTAX OCTET STRING (SIZE (1|5..32))
SnMspsSerialNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The format of serial numbers of
Siemens MSPS products."
SYNTAX OCTET STRING (SIZE (1|5..32))
SnMspsVersionNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The version format of Siemens MSPS in a
simplified OSLO form :
[RCSTBPVKD][0-9]{1,2}\.[0-9]{1,2}\.[0-9]{1,2}
"
SYNTAX OCTET STRING (SIZE (5..32))
SnMspsMacAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
A six octet string (48-bit), using the
hexadecimal representation, in canonical
order specified by IEEE Std 802
(Overview and Architecture,
formerly IEEE Std 802.1a).
Shorter MAC address values than 48 bits, if
used, are represented by setting their
unused upper octets to all 0's, i.e.,
the 16-bit address AAFF shall be
represented as 00000000AAFF.
"
SYNTAX OCTET STRING (SIZE (6))
SnMspsIpAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
An octet string which represents either a
IPv4 address or a IPv6a ddress or
a DNS compliant name.
"
SYNTAX OCTET STRING
SnMspsStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A uniform representation of status values."
SYNTAX INTEGER { invalid(0), enable(1), disable(2) }
SnMspsTrigger ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A uniform representation of trigger values"
SYNTAX INTEGER { trigger(1), notTriggered(2) }
SnMspsFunctionString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
The format of function tags according
IEC 61158-6-10, chapter 6.2.4.83.13.
The value shall be filled with blanks
if it is shorter than 32.
Non-printable characters and
control sequences are not allowed.
"
SYNTAX DisplayString (SIZE (32))
SnMspsLocationString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
The format of function tags according
IEC 61158-6-10, chapter 6.2.4.83.14.
The value shall be filled with blanks
if it is shorter than 22.
Non-printable characters and
control sequences are not allowed.
"
SYNTAX DisplayString (SIZE (22))
-- ----------------------------------------------------------------
-- MSPS General Groups
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS General Objects
-- ----------------------------------------------------------------
snMspsGeneralDeviceType OBJECT-TYPE
SYNTAX DisplayString (SIZE (10..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device Type of current product. This value is the part of
fully-qualified domain name, which is stored in sys-Name.
"
::= { snMspsGeneral 5 }
snMspsGeneralDeviceGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE (10..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group name of the device, which is used as a part
of the cplug device's identification data"
::= { snMspsGeneral 10 }
snMspsGeneralHwVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGeneralHwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains version informations of all hardware
(basic device and extension cards), which are currently
available on the device."
::= { snMspsGeneral 20 }
snMspsGeneralHwVersionEntry OBJECT-TYPE
SYNTAX SnMspsGeneralHwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each hardware
in the system, which has a MLFB number."
INDEX { snMspsGeneralHwVersionTableIndex }
::= { snMspsGeneralHwVersionTable 1 }
SnMspsGeneralHwVersionEntry ::=
SEQUENCE {
snMspsGeneralHwVersionTableIndex
INTEGER,
snMspsGeneralHwType
DisplayString,
snMspsGeneralHwName
DisplayString,
snMspsGeneralHwRevision
DisplayString,
snMspsGeneralHwOrderId
SnMspsOrderNumber
}
snMspsGeneralHwVersionTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This index correlates with entPhysicalIndex
from entPhysicalTable (ENTITY-MIB)."
::= { snMspsGeneralHwVersionEntry 1 }
snMspsGeneralHwType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of hardware in readable format."
::= { snMspsGeneralHwVersionEntry 2 }
snMspsGeneralHwName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of hardware in readable format."
::= { snMspsGeneralHwVersionEntry 3 }
snMspsGeneralHwRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hardware revision."
::= { snMspsGeneralHwVersionEntry 4 }
snMspsGeneralHwOrderId OBJECT-TYPE
SYNTAX SnMspsOrderNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Order ID of hardware."
::= { snMspsGeneralHwVersionEntry 5 }
snMspsGeneralSwVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGeneralSwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains version informations of software, which is currently
running on relevant hardware (basic device and extension cards)."
::= { snMspsGeneral 25 }
snMspsGeneralSwVersionEntry OBJECT-TYPE
SYNTAX SnMspsGeneralSwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each software
running in the system. Since the same kinds of software
could run on different hardware, which is available
on the device, the index from 'snMspsGeneralHwVersionTable'
is also used here."
INDEX { snMspsGeneralHwVersionTableIndex,
snMspsGeneralSwVersionTableIndex
}
::= { snMspsGeneralSwVersionTable 1 }
SnMspsGeneralSwVersionEntry ::=
SEQUENCE {
snMspsGeneralSwVersionTableIndex
INTEGER,
snMspsGeneralSwType
DisplayString,
snMspsGeneralSwRevision
SnMspsVersionNumber,
snMspsGeneralSwDate
DateAndTime,
snMspsGeneralSwDescription
DisplayString
}
snMspsGeneralSwVersionTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The numerical index of software,
which is available on relevant hardware."
::= { snMspsGeneralSwVersionEntry 1 }
snMspsGeneralSwType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of software in readable format."
::= { snMspsGeneralSwVersionEntry 2 }
snMspsGeneralSwRevision OBJECT-TYPE
SYNTAX SnMspsVersionNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of software revision."
::= { snMspsGeneralSwVersionEntry 3 }
snMspsGeneralSwDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The revision date of software."
::= { snMspsGeneralSwVersionEntry 4 }
snMspsGeneralSwDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of software."
::= { snMspsGeneralSwVersionEntry 5 }
snMspsConfigLoginAuthentication OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remoteRadius(2),
remoteTacacs(3),
radiusFallbackToLocal(4),
tacacsFallbackToLocal(5),
localFallbackToRadius(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the mechanism by which the user login has to be authenticated
for accessing the GUI to manage the switch. Authentication is done
either locally or in the remote side through a RADIUS Server or TACACS.
If Authentication is configured as radiusLocal or tacacsLocal then
Local authentication provides a back door or a secondary option
for authentication if the server fails."
DEFVAL { local }
::= { snMspsConfig 1 }
------ Config Control Group ------------------------------------
snMspsConfigCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control device features like egress traffic control,
stats collection, etc. either for the entire switch or for each
interface in the switch."
::= { snMspsConfig 2 }
snMspsConfigCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
In addition to that an entry with index '0' is created in this
table by default.
If 'snMspsConfigCtrlStatus' of the entry '0' is made 'valid', then
global control is chosen and the values against entry '0' is
applicable for all the interfaces of the switch.
If 'snMspsConfigCtrlStatus' of the entry '0' is made 'invalid',
then interface-wise control is chosen & the values against each
interface index is applicable for that interface.
At a particular point of time, either global control will be
applicable or interface-wise control is applicable.
Both will not be considered together.
Index to the table is the interface index of the port."
INDEX { snMspsConfigCtrlIndex }
::= { snMspsConfigCtrlTable 1 }
SnMspsConfigCtrlEntry ::=
SEQUENCE {
snMspsConfigCtrlIndex
Integer32,
snMspsConfigCtrlEgressStatus
INTEGER,
snMspsConfigCtrlStatsCollection
INTEGER,
snMspsConfigCtrlStatus
INTEGER
}
snMspsConfigCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies.
If any configuration is made in this table for the index '0',
that configuration will be considered as global configuration
and is applicable for all the interfaces of the switch."
::= { snMspsConfigCtrlEntry 1 }
snMspsConfigCtrlEgressStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the transmission of egress traffic over this interface.
This value for entry '0' controls the egress traffic over all
interfaces."
DEFVAL { enabled }
::= { snMspsConfigCtrlEntry 2 }
snMspsConfigCtrlStatsCollection OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables statistics collection for this interface.
This value for entry '0' controls the stats collection for all
interfaces."
DEFVAL { enabled }
::= { snMspsConfigCtrlEntry 3 }
snMspsConfigCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the validity of the entry.
If the 'Config Control Status' for entry '0' is made 'valid',
then global control is chosen in the system.
It signifies that the values against entry '0' is applicable
for all the interfaces of the switch.
If the 'Config Control Status' for entry '0' is made 'invalid',
then interface-wise control is chosen.
Then the values against each interface index is applicable
for that interface.
By default, 'snMspsConfigCtrlStatus' will be 'invalid' for
entry '0' and 'valid' for all other entries.
(ie) by default, interface-wise configuration is enabled
in the system.
The status of entries other than the zeroth(0th) entry can not be
made 'invalid'."
::= { snMspsConfigCtrlEntry 4 }
-- Rate Control Group --------------------------------------------- --
snMspsConfigRateCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each physical and port-channel
interface in the switch."
::= { snMspsConfig 3 }
snMspsConfigRateCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical and port-channel
interface in the switch."
INDEX { snMspsConfigRateCtrlIndex }
::= { snMspsConfigRateCtrlTable 1 }
SnMspsConfigRateCtrlEntry ::=
SEQUENCE {
snMspsConfigRateCtrlIndex
Integer32,
snMspsConfigRateCtrlDLFLimitValue
Integer32,
snMspsConfigRateCtrlBCASTLimitValue
Integer32,
snMspsConfigRateCtrlMCASTLimitValue
Integer32,
snMspsConfigRateCtrlPortRateLimit
Integer32,
snMspsConfigRateCtrlPortBurstSize
Integer32,
snMspsConfigRateCtrlUCASTLimitValue
Integer32
}
snMspsConfigRateCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { snMspsConfigRateCtrlEntry 1 }
snMspsConfigRateCtrlDLFLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf data that can be transmitted per second over this interface.
The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate limiting for
Destination lookup failure packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 2 }
snMspsConfigRateCtrlBCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of broadcast data that can be transmitted per second over this
interface. The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate
limiting for Broadcast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 3 }
snMspsConfigRateCtrlMCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of multicast data that can be transmitted per second over this
interface. The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 4}
snMspsConfigRateCtrlPortRateLimit OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed."
::= { snMspsConfigRateCtrlEntry 5 }
snMspsConfigRateCtrlPortBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering. A
value of zero(0) disable burst rate limiting i.e. sets the port burst
rate limit to full speed."
::= { snMspsConfigRateCtrlEntry 6 }
snMspsConfigRateCtrlUCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of unicast data that can be transmitted per second over this
interface. The unit of data is given by snMspsConfigRateCtrlUnit object.
Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlEntry 7}
-- Rate Control Group --------------------------------------------- --
snMspsConfigAclRateCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigAclRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each physical and port-channel
interface in the switch. Chip-Dependent!"
::= { snMspsConfig 4 }
snMspsConfigAclRateCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigAclRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical and port-channel
interface in the switch."
INDEX { snMspsConfigAclRateCtrlIndex }
::= { snMspsConfigAclRateCtrlTable 1 }
SnMspsConfigAclRateCtrlEntry ::=
SEQUENCE {
snMspsConfigAclRateCtrlIndex
Integer32,
snMspsConfigAclRateCtrlDLFLimitValue
Integer32,
snMspsConfigAclRateCtrlBCASTLimitValue
Integer32,
snMspsConfigAclRateCtrlMCASTLimitValue
Integer32,
snMspsConfigAclRateCtrlPortRateLimit
Integer32,
snMspsConfigAclRateCtrlPortBurstSize
Integer32
}
snMspsConfigAclRateCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { snMspsConfigAclRateCtrlEntry 1 }
snMspsConfigAclRateCtrlDLFLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf packets that can be transmitted per second over this interface.
Setting this object to the value zero disables rate limiting for
Destination lookup failure packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigAclRateCtrlEntry 2 }
snMspsConfigAclRateCtrlBCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of broadcast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Broadcast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigAclRateCtrlEntry 3 }
snMspsConfigAclRateCtrlMCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of multicast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigAclRateCtrlEntry 4}
snMspsConfigAclRateCtrlPortRateLimit OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed."
::= { snMspsConfigAclRateCtrlEntry 5 }
snMspsConfigAclRateCtrlPortBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..80000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering. A
value of zero(0) disable burst rate limiting i.e. sets the port burst
rate limit to full speed."
::= { snMspsConfigAclRateCtrlEntry 6 }
-- Port Control Table
snMspsConfigPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { snMspsConfig 5 }
snMspsConfigPortCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { snMspsConfigPortCtrlIndex }
::= { snMspsConfigPortCtrlTable 1 }
SnMspsConfigPortCtrlEntry ::=
SEQUENCE {
snMspsConfigPortCtrlIndex
Integer32,
snMspsConfigPortCtrlMode
INTEGER,
snMspsConfigPortCtrlDuplex
INTEGER,
snMspsConfigPortCtrlSpeed
INTEGER,
snMspsConfigPortCtrlFlowControl
INTEGER,
snMspsConfigPortCtrlRenegotiate
INTEGER,
snMspsConfigPortCtrlMaxMacAddr
Integer32,
snMspsConfigPortCtrlMaxMacAction
INTEGER,
snMspsConfigPortHOLBlockPrevention
INTEGER
}
snMspsConfigPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { snMspsConfigPortCtrlEntry 1 }
snMspsConfigPortCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
noNegotiation (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective."
DEFVAL { auto }
::= { snMspsConfigPortCtrlEntry 2 }
snMspsConfigPortCtrlDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { snMspsConfigPortCtrlEntry 3 }
snMspsConfigPortCtrlSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { snMspsConfigPortCtrlEntry 4 }
snMspsConfigPortCtrlFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { snMspsConfigPortCtrlEntry 5 }
snMspsConfigPortCtrlRenegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When configured as 'true', restarts autonegotiation on the interface.
Once autonegotiation is restarted, the value of this object reverts
to 'false'."
DEFVAL { false }
::= { snMspsConfigPortCtrlEntry 6 }
snMspsConfigPortCtrlMaxMacAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of new MAC addresses that can be
learnt over the interface."
::= { snMspsConfigPortCtrlEntry 7 }
snMspsConfigPortCtrlMaxMacAction OBJECT-TYPE
SYNTAX INTEGER {
drop (1),
purgeLRU (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken when the maximum number of new MAC
addresses that can be learnt over the interface is exceeded.
If the action is 'drop', the packet with new mac address will be
dropped once the maximum number of new MAC addresses that can be
learnt over the interface is exceeded.
If the action is 'purgeLRU', the 'Least Recently Used' mac address
will be deleted from the MAC table and the new mac address will be
added."
::= { snMspsConfigPortCtrlEntry 8 }
snMspsConfigPortHOLBlockPrevention OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Head-Of-Line Blocking prevention on a port."
DEFVAL { enabled }
::= { snMspsConfigPortCtrlEntry 9 }
-- Mirror Group ------------------------------------------------------
snMspsConfigMirror OBJECT IDENTIFIER ::= { snMspsConfig 6 }
snMspsConfigMirrorStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable mirroring
feature in hardware.
When set to 'disabled (1)', all mirroring configurations will be
removed from hardware.
When set to 'enabled (2)', all mirroring configurations
present in software will be programmed in hardware."
DEFVAL { disabled }
::= { snMspsConfigMirror 1 }
snMspsConfigMirrorToPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port to which the active mirrored traffic controlled
by snMspsConfigMirrorCtrlTable is to be copied."
::= { snMspsConfigMirror 2 }
-- Mirror Control Table
snMspsConfigMirrorCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control mirroring features for each interface
in the switch.
Parameters in this table are valid only when the
'snMspsConfigMirrorStatus' for the switch is not 'disabled'."
::= { snMspsConfigMirror 3 }
snMspsConfigMirrorCtrlEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { snMspsConfigMirrorCtrlIndex }
::= { snMspsConfigMirrorCtrlTable 1 }
SnMspsConfigMirrorCtrlEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlIndex
Integer32,
snMspsConfigMirrorCtrlIngressMirroring
INTEGER,
snMspsConfigMirrorCtrlEgressMirroring
INTEGER,
snMspsConfigMirrorCtrlStatus
INTEGER
}
snMspsConfigMirrorCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies."
::= { snMspsConfigMirrorCtrlEntry 1 }
snMspsConfigMirrorCtrlIngressMirroring OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of ingress
traffic over this interface to the mirrored-to port."
DEFVAL { disabled }
::= { snMspsConfigMirrorCtrlEntry 2 }
snMspsConfigMirrorCtrlEgressMirroring OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of egress
traffic over this interface to the mirrored-to port."
DEFVAL { disabled }
::= { snMspsConfigMirrorCtrlEntry 3 }
snMspsConfigMirrorCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the validity of the entry."
::= { snMspsConfigMirrorCtrlEntry 4 }
-- Mirror Control Extension Table
-- snMspsConfigMirror 4 Reserved for future extensions
-- snMspsConfigMirror 5 Reserved for future extensions
snMspsConfigMirrorCtrlExtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Table is used to configure advanced mirroring features like
- Port Based Mirroring:
- flow based mirroring
- vlan based mirroring
Following are the configuration details for Port based mirroring:
To configure source ports in a session
- snMspsConfigMirrorCtrlExtnMirrType - is set to portBased
- snMspsConfigMirrorCtrlExtnSrcTable - should be used to configure list
of source ports to be mirrored
in a session
- snMspsConfigMirrorCtrlExtnSrcId - represents the source port.
The port Id to be mirrored
should be given here.
- snMspsConfigMirrorCtrlExtnSrcCfg - this object is used to
add/remove a port in the
source port list
Example
To create a session 1 with source ports 5,6 following
sequence of configuration should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnMirrType = portBased
For table snMspsConfigMirrorCtrlExtnSrcTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcId = 5 as index
snMspsConfigMirrorCtrlExtnSrcCfg = add
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcId = 6 as index
snMspsConfigMirrorCtrlExtnSrcCfg = add
To configure destination ports in a session
- snMspsConfigMirrorCtrlExtnDestinationTable - should be used to
configure list of
destination ports to be
mirrored in a session
- snMspsConfigMirrorCtrlExtnDestination - represents the
destination port. The
port Id to which packets
should be mirrored should
be given here.
- snMspsConfigMirrorCtrlExtnDestCfg - this object is used to
add/remove a port in the
source port list.
Example
To create a session 1 with destination port 10,11 following
sequence of configuration should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnMirrType = portBased
For table snMspsConfigMirrorCtrlExtnDestinationTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnDestination = 10 as index
snMspsConfigMirrorCtrlExtnDestCfg = add
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnDestination = 11 as index
snMspsConfigMirrorCtrlExtnDestCfg = add
To Activate a session
- snMspsConfigMirrorCtrlExtnStatus - should be used to
activate/deactivate mirroring for a
session
Example
To enable mirroring for a session following sequence of
configuration should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnStatus = active
Above configurations applies to flow based mirroring also, the
snMspsConfigMirrorCtrlExtnSrcId used above for configuratin ports
should be used to configure flow Id
To enable remote monitoring of sources for a session
- snMspsConfigMirrorCtrlExtnRSpanStatus - should be used to
enable/disable remote
monitoring for a session
it can be used to set a
session as source rspan
session which implies source
entities for this session are
monitored remotely or can be
used to set a session
as destination rspan session
which implies that mirrored
data is received for this
session should be forwarded to
destination entities of this
session
- snMspsConfigMirrorCtrlExtnRSpanVlanId - it is the vlan id which is
reserved in the network to
carry Mirrored data,if the
session is configured as
source rspan session then data
mirrored for the source
entities will be forwarded on
this vlan if the session is
configured as destination
rspan session then data
received on this vlan will be
forwarded to the destination
entities of this session
Following are the configuration details for configurating Vlan
based mirroring:
To configure vlans as source for a session
- snMspsConfigMirrorCtrlExtnMirrType - is set to vlanBased
- snMspsConfigMirrorCtrlExtnSrcVlanTable - should be used to configure
list of source vlans to be
mirrored in a session
- snMspsConfigMirrorCtrlExtnSrcVlanId - represents a source vlan. The
vlan to be mirrored should be
given here.
- snMspsConfigMirrorCtrlExtnSrcVlanCfg - this object is used to
add/remove a vlan in the
source vlan list
Example
To create a session 1 with source list as vlan 5,6
belonging to context 1 following sequence of configuration
should be followed
For table snMspsConfigMirrorCtrlExtnTable
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnMirrType = vlanBased
For table snMspsConfigMirrorCtrlExtnSrcVlanTable
snMspsConfigMirrorCtrlExtnSrcVlanContext = 1 as index
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcVlanId = 5 as index
snMspsConfigMirrorCtrlExtnSrcVlanCfg = add
snMspsConfigMirrorCtrlExtnSrcVlanContext = 1 as index
snMspsConfigMirrorCtrlExtnSessionIndex = 1 as index
snMspsConfigMirrorCtrlExtnSrcVlanId = 6 as index
snMspsConfigMirrorCtrlExtnSrcVlanCfg = add
Entries for this table can be configured only when snMspsConfigMirrorStatus
is set to enabled.
Configurations done through 'snMspsConfigMirrorCtrlTable' will change the
following for the first session on this table:
- Mirroring type will be changed to port-based
- Mode and Source entities will be overwritten
with the values configured through 'snMspsConfigMirrorCtrlTable'
- Destination entities will be overwritten
with the value configured through 'snMspsConfigMirrorToPort' object "
::= { snMspsConfigMirror 6 }
snMspsConfigMirrorCtrlExtnEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each session
in the system."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex}
::= { snMspsConfigMirrorCtrlExtnTable 1 }
SnMspsConfigMirrorCtrlExtnEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnSessionIndex
Integer32,
snMspsConfigMirrorCtrlExtnMirrType
INTEGER,
snMspsConfigMirrorCtrlExtnRSpanStatus
INTEGER,
snMspsConfigMirrorCtrlExtnRSpanVlanId
Integer32,
snMspsConfigMirrorCtrlExtnRSpanContext
Integer32,
snMspsConfigMirrorCtrlExtnStatus
RowStatus,
snMspsConfigMirrorCtrlExtnHardwareIndex
Integer32
}
snMspsConfigMirrorCtrlExtnSessionIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the mirroring session for which the configuration
in this entry applies."
::= { snMspsConfigMirrorCtrlExtnEntry 1 }
snMspsConfigMirrorCtrlExtnMirrType OBJECT-TYPE
SYNTAX INTEGER{
portBased(1),
mac-flowBased(2),
vlanBased(3),
invalid(4),
ip-flowBased(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object tells the type of mirroring this session supports.
This object needs to be set before doing any configuration for
a mirroring session"
DEFVAL { invalid }
::= { snMspsConfigMirrorCtrlExtnEntry 2 }
snMspsConfigMirrorCtrlExtnRSpanStatus OBJECT-TYPE
SYNTAX INTEGER{
sourceRSpanVlan(1),
destinationRSpanVlan(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates session is enabled or disabled for
Remote monitoring.
If set as 'source-rspan-vlanid' indicates that the session is
enabled for Remote monitoring and the source entities for this
session will be remotely monitored.
If set as 'destination-rspan-vlanid' indicates that the session
should monitor remote traffic mirrored with RSPAN VLAN ID tag.
RSPAN VLAN ID should be configured through object
'snMspsConfigMirrorCtrlExtnRSpanVlanId'.
If set as 'disabled' Remote monitoring is disabled for this
mirroring session."
DEFVAL { disabled }
::= { snMspsConfigMirrorCtrlExtnEntry 3 }
snMspsConfigMirrorCtrlExtnRSpanVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id used for Remote monitoring for this session.
If snMspsConfigMirrorCtrlExtnRSpanStatus is set to disabled, then
this object will have an invalid value (zero)"
DEFVAL { 0 }
::= { snMspsConfigMirrorCtrlExtnEntry 4 }
snMspsConfigMirrorCtrlExtnRSpanContext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Context Id to which the RSpan Vlan belongs.
Value '0' mean this object is not considered for this
mirroring session."
DEFVAL { 0 }
::= { snMspsConfigMirrorCtrlExtnEntry 5 }
snMspsConfigMirrorCtrlExtnStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of the entry. The entry can be
made active only if snMspsConfigMirrorCtrlExtnMirrType is configured and
source and destination entries for this sesion is also configured"
::= { snMspsConfigMirrorCtrlExtnEntry 6 }
snMspsConfigMirrorCtrlExtnHardwareIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Hardware Index associated with this mirroring session.
Value '0' mean this object is not applicable for this
mirroring session."
::= { snMspsConfigMirrorCtrlExtnEntry 7 }
snMspsConfigMirrorCtrlExtnSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure list of source entities for mirroring sessions"
::= { snMspsConfigMirror 7 }
snMspsConfigMirrorCtrlExtnSrcEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each mirroring session."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnSrcId }
::= { snMspsConfigMirrorCtrlExtnSrcTable 1 }
SnMspsConfigMirrorCtrlExtnSrcEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnSrcId
Integer32,
snMspsConfigMirrorCtrlExtnSrcCfg
INTEGER,
snMspsConfigMirrorCtrlExtnSrcMode
INTEGER
}
snMspsConfigMirrorCtrlExtnSrcId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the source id which participates in a mirroring session.
For Port based mirroring this object can be port IfIndex.
To mirror Tunnel and Trunk ports the same Id can be used for
specifying Tunnel/Trunk Id.
For Flow based mirroring this object can be Acl Ids."
::= { snMspsConfigMirrorCtrlExtnSrcEntry 1 }
snMspsConfigMirrorCtrlExtnSrcCfg OBJECT-TYPE
SYNTAX INTEGER{
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create/delete a source entry for a session."
::= { snMspsConfigMirrorCtrlExtnSrcEntry 2 }
snMspsConfigMirrorCtrlExtnSrcMode OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to set the mode of mirroring.
It can be ingerss,Egress or Both."
DEFVAL { both }
::= { snMspsConfigMirrorCtrlExtnSrcEntry 3 }
snMspsConfigMirrorCtrlExtnSrcVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnSrcVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure list of vlan source entities for mirroring sessions"
::= { snMspsConfigMirror 8 }
snMspsConfigMirrorCtrlExtnSrcVlanEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnSrcVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each mirroring session."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnSrcVlanContext, snMspsConfigMirrorCtrlExtnSrcVlanId }
::= { snMspsConfigMirrorCtrlExtnSrcVlanTable 1 }
SnMspsConfigMirrorCtrlExtnSrcVlanEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnSrcVlanContext
Integer32,
snMspsConfigMirrorCtrlExtnSrcVlanId
Integer32,
snMspsConfigMirrorCtrlExtnSrcVlanCfg
INTEGER,
snMspsConfigMirrorCtrlExtnSrcVlanMode
INTEGER
}
snMspsConfigMirrorCtrlExtnSrcVlanContext OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Context Id to which the source entity belongs, this
is used in case of specifying vlan as source.
Value '-1' mean this object is not considered for this mirroring
session."
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 1 }
snMspsConfigMirrorCtrlExtnSrcVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Vlan id which participates in a mirroring session."
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 2 }
snMspsConfigMirrorCtrlExtnSrcVlanCfg OBJECT-TYPE
SYNTAX INTEGER{
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create/delete a vlan entry for a session."
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 3 }
snMspsConfigMirrorCtrlExtnSrcVlanMode OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to set the mode of mirroring.
It can be ingerss,Egress or Both."
DEFVAL { both }
::= { snMspsConfigMirrorCtrlExtnSrcVlanEntry 4 }
snMspsConfigMirrorCtrlExtnDestinationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigMirrorCtrlExtnDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure list of destination entities"
::= { snMspsConfigMirror 9 }
snMspsConfigMirrorCtrlExtnDestinationEntry OBJECT-TYPE
SYNTAX SnMspsConfigMirrorCtrlExtnDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each destination entity
in a mirroring session."
INDEX { snMspsConfigMirrorCtrlExtnSessionIndex, snMspsConfigMirrorCtrlExtnDestination }
::= { snMspsConfigMirrorCtrlExtnDestinationTable 1 }
SnMspsConfigMirrorCtrlExtnDestinationEntry ::=
SEQUENCE {
snMspsConfigMirrorCtrlExtnDestination
Integer32,
snMspsConfigMirrorCtrlExtnDestCfg
INTEGER
}
snMspsConfigMirrorCtrlExtnDestination OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the destination port id which participates in a mirroring
session."
::= { snMspsConfigMirrorCtrlExtnDestinationEntry 1 }
snMspsConfigMirrorCtrlExtnDestCfg OBJECT-TYPE
SYNTAX INTEGER{
add (1),
delete (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create/delete a destination entry for a session."
::= { snMspsConfigMirrorCtrlExtnDestinationEntry 2 }
-- Network Group --------------------------------------------------
snMspsConfigNetwork OBJECT IDENTIFIER ::= { snMspsConfig 7 }
snMspsConfigL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { snMspsConfigNetwork 1 }
snMspsConfigL2FilterEntry OBJECT-TYPE
SYNTAX SnMspsConfigL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number."
INDEX { snMspsConfigL2FilterNo}
::= { snMspsConfigL2FilterTable 1 }
SnMspsConfigL2FilterEntry ::=
SEQUENCE {
snMspsConfigL2FilterNo
Integer32,
snMspsConfigL2FilterPriority
Integer32,
snMspsConfigL2FilterEtherType
Integer32,
snMspsConfigL2FilterProtocolType
Unsigned32,
snMspsConfigL2FilterDstMacAddr
MacAddress,
snMspsConfigL2FilterSrcMacAddr
MacAddress,
snMspsConfigL2FilterVlanId
Integer32,
snMspsConfigL2FilterInPortList
PortList,
snMspsConfigL2FilterAction
INTEGER,
snMspsConfigL2FilterMatchCount
Counter32,
snMspsConfigL2FilterStatus
RowStatus,
snMspsConfigL2FilterOutPortList
PortList,
snMspsConfigL2FilterDirection
INTEGER
}
snMspsConfigL2FilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L2 Filter rule number."
::= { snMspsConfigL2FilterEntry 1 }
snMspsConfigL2FilterPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the L2 filter can be used to decide which filter rule
is applicable when
--> the packet matches with more than one filter rules
--> All the filter rules result in 'allow'ing the packet
Higher value of 'filter priority' implies a higher priority.
Usage of 'L2FilterPriority' is implementation dependant."
DEFVAL { 1 }
::= { snMspsConfigL2FilterEntry 2 }
snMspsConfigL2FilterEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0'. When this object is SET with the default
value, frames are not matched for the value in the Type/Len
field with the value set for this object."
DEFVAL { 0 }
::= { snMspsConfigL2FilterEntry 3 }
snMspsConfigL2FilterProtocolType OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the non IP protocol type to be filtered.
aarp | amber | dec-spanning | decnet-iv |
diagnostic | dsm |etype-6000 | etype-8042 |
lat | lavc-sca | mop-console | mop-dump |
msdos | mumps | netbios | vines-echo |
vines-ip | xns-idp: A non-IP protocol.
A value of '0' means, the filter is applicable for all protocols."
DEFVAL { 0 }
::= { snMspsConfigL2FilterEntry 4 }
snMspsConfigL2FilterDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero which means dont care condition ie)
any Dst Mac Address ."
::= { snMspsConfigL2FilterEntry 5 }
snMspsConfigL2FilterSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero which means dont care condition ie) any Src Mac
address"
::= { snMspsConfigL2FilterEntry 6 }
snMspsConfigL2FilterVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id.
A value of '0' means, this object is unused. Configuring this value is not
allowed."
DEFVAL { 0 }
::= { snMspsConfigL2FilterEntry 7 }
snMspsConfigL2FilterInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
If the In port list is '0', the filter rule is applicable for the
incoming packets on all ports.
Even though the snMspsConfigL2FilterInPortList is configured, It is applicable only
if snMspsConfigL2FilterDirection is configured as 'in'.
By default inport list is maintained as '0'."
::= { snMspsConfigL2FilterEntry 8 }
snMspsConfigL2FilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { snMspsConfigL2FilterEntry 9 }
snMspsConfigL2FilterMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { snMspsConfigL2FilterEntry 10 }
snMspsConfigL2FilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsConfigL2FilterEntry 11 }
snMspsConfigL2FilterOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets egress at Ports in this list.
If the Out port list is '0', the filter rule is applicable for the
outgoing packets on all ports.
Even though the snMspsConfigL2FilterOutPortList is configured, It is applicable only
if snMspsConfigL2FilterDirection is configured as 'out'.
By default outport list is maintained as '0'."
::= { snMspsConfigL2FilterEntry 12 }
snMspsConfigL2FilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in (1),
out (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction.
When the direction of this filter is 'in', It is applied on specified
ports of the snMspsConfigL2FilterInPortList.
When the direction of this filter is 'out', It is applied on specified
ports of the snMspsConfigL2FilterOutPortList."
DEFVAL { in }
::= { snMspsConfigL2FilterEntry 13 }
-- Layer 4 Switching
snMspsConfigL4SwitchingFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigL4SwitchingFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to L4 Switching rules in the system.
"
::= { snMspsConfigNetwork 2 }
snMspsConfigL4SwitchingFilterEntry OBJECT-TYPE
SYNTAX SnMspsConfigL4SwitchingFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L4 Switching rule.
Index to the table is L4 filter number. "
INDEX { snMspsConfigL4SwitchingFilterNo}
::= { snMspsConfigL4SwitchingFilterTable 1 }
SnMspsConfigL4SwitchingFilterEntry ::=
SEQUENCE {
snMspsConfigL4SwitchingFilterNo
Integer32,
snMspsConfigL4SwitchingProtocol
Integer32,
snMspsConfigL4SwitchingPortNo
Unsigned32,
snMspsConfigL4SwitchingCopyToPort
Integer32,
snMspsConfigL4SwitchingFilterStatus
RowStatus
}
snMspsConfigL4SwitchingFilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L4 Switching Filter rule number."
::= { snMspsConfigL4SwitchingFilterEntry 1 }
snMspsConfigL4SwitchingProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of protocol to be checked against the packet. The
default value is 255. If the value is 255, it means that the
protocol type can be anything and it will not be checked to
decide the action. "
DEFVAL { 255 }
::= { snMspsConfigL4SwitchingFilterEntry 2 }
snMspsConfigL4SwitchingPortNo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Layer 4 port no. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { snMspsConfigL4SwitchingFilterEntry 3 }
snMspsConfigL4SwitchingCopyToPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is Port to which the packet would be switched"
::= { snMspsConfigL4SwitchingFilterEntry 4 }
snMspsConfigL4SwitchingFilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsConfigL4SwitchingFilterEntry 5 }
-- ------------------------------------------------------------------
-- IP Authorized Manager
snMspsConfigIpAuthMgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigIpAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure IP authorized managers in the system."
::= { snMspsConfigNetwork 3 }
snMspsConfigIpAuthMgrEntry OBJECT-TYPE
SYNTAX SnMspsConfigIpAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP Authorized managers, which restricts configuration from specific
workstations only, provides additional security. Each entry in this
table represents rules for particular IP authorized manager."
INDEX { snMspsConfigIpAuthMgrIpAddr, snMspsConfigIpAuthMgrIpMask }
::= { snMspsConfigIpAuthMgrTable 1 }
SnMspsConfigIpAuthMgrEntry ::=
SEQUENCE {
snMspsConfigIpAuthMgrIpAddr
IpAddress,
snMspsConfigIpAuthMgrIpMask
IpAddress,
snMspsConfigIpAuthMgrPortList
PortList,
snMspsConfigIpAuthMgrVlanList
OCTET STRING,
snMspsConfigIpAuthMgrOOBPort
TruthValue,
snMspsConfigIpAuthMgrAllowedServices
Integer32,
snMspsConfigIpAuthMgrRowStatus
RowStatus,
snMspsConfigIpAuthMgrCreationOrder
Integer32
}
snMspsConfigIpAuthMgrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { snMspsConfigIpAuthMgrEntry 1 }
snMspsConfigIpAuthMgrIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the IP address mask to be applied on snMspsConfigIpAuthMgrIpAddr.
Value 0.0.0.0 indicates mask for 'Any Manager'."
::= { snMspsConfigIpAuthMgrEntry 2 }
snMspsConfigIpAuthMgrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { snMspsConfigIpAuthMgrEntry 3 }
snMspsConfigIpAuthMgrVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Vlan's in which the IP authorized manager can reside.
By default the manager is allowed to reside in any vlan.
If a set of vlans are configured in the 'VlanList', the manager can
reside only in the configured vlan set. Access to the switch
will be denied from any other vlan."
::= { snMspsConfigIpAuthMgrEntry 4 }
snMspsConfigIpAuthMgrOOBPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the authorized manager can access the switch
through OOB Port
By default the manager is denied access to reside on OOB Interface"
DEFVAL { false }
::= { snMspsConfigIpAuthMgrEntry 5 }
snMspsConfigIpAuthMgrAllowedServices OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the allowed services through which the authorized manager can
access the switch.
This object takes bit mask values. The services represented by each bit
position is as given below:
With bit 0 being the Least Significant Bit,
Bit0 --> snmp
Bit1 --> telnet
Bit2 --> http
Bit3 --> https
Bit4 --> ssh
If the particular bit is set to 1,corresponding service is allowed for
the configured manager.
By default all services are allowed for the configured manager."
DEFVAL { '1F'h }
::= { snMspsConfigIpAuthMgrEntry 6 }
snMspsConfigIpAuthMgrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsConfigIpAuthMgrEntry 7 }
snMspsConfigIpAuthMgrCreationOrder OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies creation order of the rules"
::= { snMspsConfigIpAuthMgrEntry 8 }
snMspsConfigIpAuthMgrEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable Ip Authorized Manager."
DEFVAL {disabled}
::= { snMspsConfigNetwork 4 }
snMspsConfigResetTopologyChgCounter OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset topology change counters for RSTP and MSTP depending on the stack running."
::= { snMspsConfigNetwork 5 }
-- snMspsConfigNetwork 6-9 reserved for future extensions
-- ------------------------------------------------------------------
-- Ipvx Authorized Manager
snMspsConfigIpvxAuthMgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigIpvxAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure Ipvx(ipv4 and ipv6) authorized managers in the system."
::= { snMspsConfigNetwork 10 }
snMspsConfigIpvxAuthMgrEntry OBJECT-TYPE
SYNTAX SnMspsConfigIpvxAuthMgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ipvx Authorized managers, which restricts configuration from specific
workstations only, provides additional security. Each entry in this
table represents rules for particular Ipvx authorized manager."
INDEX { snMspsConfigIpvxAuthMgrAddrType, snMspsConfigIpvxAuthMgrAddr, snMspsConfigIpvxAuthMgrAddrLen }
::= { snMspsConfigIpvxAuthMgrTable 1 }
SnMspsConfigIpvxAuthMgrEntry ::=
SEQUENCE {
snMspsConfigIpvxAuthMgrAddrType
InetAddressType,
snMspsConfigIpvxAuthMgrAddr
InetAddress,
snMspsConfigIpvxAuthMgrAddrLen
InetAddressPrefixLength,
snMspsConfigIpvxAuthMgrPortList
PortList,
snMspsConfigIpvxAuthMgrVlanList
OCTET STRING,
snMspsConfigIpvxAuthMgrOOBPort
TruthValue,
snMspsConfigIpvxAuthMgrAllowedServices
Integer32,
snMspsConfigIpvxAuthMgrCreationOrder
Integer32,
snMspsConfigIpvxAuthMgrRowStatus
RowStatus
}
snMspsConfigIpvxAuthMgrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type of SnMspsConfigIpvxAuthMgrEntry.
This value determines the type for
snMspsConfigIpvxAuthMgrAddr and snMspsConfigIpvxAuthMgrAddrLen.
ipv4(1) and ipv6(2) are the only two values supported
in this MIB module."
::= { snMspsConfigIpvxAuthMgrEntry 1 }
snMspsConfigIpvxAuthMgrAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 or :: indicates 'Any Manager'."
::= { snMspsConfigIpvxAuthMgrEntry 2 }
snMspsConfigIpvxAuthMgrAddrLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the snMspsConfigIpvxAuthMgrAddr
before being compared to the value in the
snMspsConfigIpvxAuthMgrAddr field.
The values for the index objects snMspsConfigIpvxAuthMgrAddr and
snMspsConfigIpvxAuthMgrAddrLen must be consistent.
Value 0 indicates mask for 'Any Manager'."
::= { snMspsConfigIpvxAuthMgrEntry 3 }
snMspsConfigIpvxAuthMgrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { snMspsConfigIpvxAuthMgrEntry 4 }
snMspsConfigIpvxAuthMgrVlanList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Vlan's in which the IP authorized manager can reside.
By default the manager is allowed to reside in any vlan.
If a set of vlans are configured in the 'VlanList', the manager can
reside only in the configured vlan set. Access to the switch
will be denied from any other vlan."
::= { snMspsConfigIpvxAuthMgrEntry 5 }
snMspsConfigIpvxAuthMgrOOBPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the authorized manager can access the switch
through OOB Port
By default the manager is denied access to reside on OOB Interface"
DEFVAL { false }
::= { snMspsConfigIpvxAuthMgrEntry 6 }
snMspsConfigIpvxAuthMgrAllowedServices OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the allowed services through which the authorized manager can
access the switch.
This object takes bit mask values. The services represented by each bit
position is as given below:
With bit 0 being the Least Significant Bit,
Bit0 --> snmp
Bit1 --> telnet
Bit2 --> http
Bit3 --> https
Bit4 --> ssh
If the particular bit is set to 1,corresponding service is allowed for
the configured manager.
By default all services are allowed for the configured manager."
DEFVAL { '1F'h }
::= { snMspsConfigIpvxAuthMgrEntry 7 }
snMspsConfigIpvxAuthMgrCreationOrder OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies creation order of the rules"
::= { snMspsConfigIpvxAuthMgrEntry 8 }
snMspsConfigIpvxAuthMgrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsConfigIpvxAuthMgrEntry 9 }
-- ------------------------------------------------------------------
snMspsConfigIpVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Inband ports VLAN ID (VID) from 1 to 4094 or 0 if
the VID is unassigned for the agent."
DEFVAL {0}
::= { snMspsConfig 8 }
snMspsConfigAgentReceiveOnAllKnownVLANs OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting AgentReceiveOnAllKnownVLANs to Enable(1)
enables the reception of IP traffic for the agent on all VLANs.
This means the agent accepts incoming connections on all the VLANs.
For outgoing traffic like sending SNMP traps and
connection to the e-mail server the Agent VLAN is used."
::= { snMspsConfig 9 }
snMspsConfigVlan0Aware OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID of VLAN which is to be in transparent mode. Zero (0) indicates that no VLAN is in transparent mode."
DEFVAL {0}
::= { snMspsConfig 10}
--snMspsConfig 11 reserved for future extensions
-- Port Control Configuration Table
snMspsConfigPortCtrlConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigPortCtrlConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { snMspsConfig 12 }
snMspsConfigPortCtrlConfigurationEntry OBJECT-TYPE
SYNTAX SnMspsConfigPortCtrlConfigurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { snMspsConfigPortCtrlConfigurationIndex }
::= { snMspsConfigPortCtrlConfigurationTable 1 }
SnMspsConfigPortCtrlConfigurationEntry ::=
SEQUENCE {
snMspsConfigPortCtrlConfigurationIndex
Integer32,
snMspsConfigPortCtrlConfigurationMode
INTEGER,
snMspsConfigPortCtrlConfigurationDuplex
INTEGER,
snMspsConfigPortCtrlConfigurationSpeed
INTEGER,
snMspsConfigPortCtrlConfigurationFlowControl
INTEGER,
snMspsConfigPortCtrlConfigurationRenegotiate
INTEGER,
snMspsConfigPortCtrlConfigurationMaxMacAddr
Integer32,
snMspsConfigPortCtrlConfigurationMaxMacAction
INTEGER,
snMspsConfigPortCtrlConfigurationHOLBlockPrevention
INTEGER
}
snMspsConfigPortCtrlConfigurationIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { snMspsConfigPortCtrlConfigurationEntry 1 }
snMspsConfigPortCtrlConfigurationMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
noNegotiation (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMode')."
DEFVAL { auto }
::= { snMspsConfigPortCtrlConfigurationEntry 2 }
snMspsConfigPortCtrlConfigurationDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlDuplex')."
::= { snMspsConfigPortCtrlConfigurationEntry 3 }
snMspsConfigPortCtrlConfigurationSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlSpeed')."
::= { snMspsConfigPortCtrlConfigurationEntry 4 }
snMspsConfigPortCtrlConfigurationFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlFlowControl')."
::= { snMspsConfigPortCtrlConfigurationEntry 5 }
snMspsConfigPortCtrlConfigurationRenegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When configured as 'true', restarts autonegotiation on the interface.
Once autonegotiation is restarted, the value of this object reverts
to 'false'.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlRenegotiate')."
DEFVAL { false }
::= { snMspsConfigPortCtrlConfigurationEntry 6 }
snMspsConfigPortCtrlConfigurationMaxMacAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of new MAC addresses that can be
learnt over the interface.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMaxMacAddr')."
::= { snMspsConfigPortCtrlConfigurationEntry 7 }
snMspsConfigPortCtrlConfigurationMaxMacAction OBJECT-TYPE
SYNTAX INTEGER {
drop (1),
purgeLRU (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken when the maximum number of new MAC
addresses that can be learnt over the interface is exceeded.
If the action is 'drop', the packet with new mac address will be
dropped once the maximum number of new MAC addresses that can be
learnt over the interface is exceeded.
If the action is 'purgeLRU', the 'Least Recently Used' mac address
will be deleted from the MAC table and the new mac address will be
added.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortCtrlMaxMacAction')."
::= { snMspsConfigPortCtrlConfigurationEntry 8 }
snMspsConfigPortCtrlConfigurationHOLBlockPrevention OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Head-Of-Line Blocking prevention on a port.
The current value of this MIB object represents only configuration state.
The real state of this port-specific parameter may be different ('see snMspsConfigPortHOLBlockPrevention')."
DEFVAL { enabled }
::= { snMspsConfigPortCtrlConfigurationEntry 9 }
--snMspsConfig 13-14 reserved for future extensions
-- Rate Control Limit Group ---------------------------------------------
snMspsConfigRateCtrlLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigRateCtrlLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each physical and port-channel
interface in the switch."
::= { snMspsConfig 15 }
snMspsConfigRateCtrlLimitEntry OBJECT-TYPE
SYNTAX SnMspsConfigRateCtrlLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical and port-channel
interface in the switch."
INDEX { snMspsConfigRateCtrlLimitIndex }
::= { snMspsConfigRateCtrlLimitTable 1 }
SnMspsConfigRateCtrlLimitEntry ::=
SEQUENCE {
snMspsConfigRateCtrlLimitIndex
Integer32,
snMspsConfigRateCtrlLimitValue
Integer32
}
snMspsConfigRateCtrlLimitIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { snMspsConfigRateCtrlLimitEntry 1 }
snMspsConfigRateCtrlLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf, multicast and broadcast data that can be transmitted
per second over this interface. The unit of data is given by
snMspsConfigRateCtrlUnit object. Setting this object to the
value zero disables rate limiting for Destination lookup failure
packets on this interface. The value that can be set for this
object is limited by the underlying hardware"
DEFVAL {0}
::= { snMspsConfigRateCtrlLimitEntry 2 }
snMspsConfigRateCtrlUnit OBJECT-TYPE
SYNTAX INTEGER {
pps (1),
kbps (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines unit of rate limiting values in corresponding entry
from snMspsConfigRateCtrlTable. It can be treated
either in packet per second or kilobit per second."
::= { snMspsConfig 16 }
--snMspsConfig 17-19 reserved for future extensions
snMspsConfigSwitchAgingEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable auto-aging functionality of the learning table."
DEFVAL {enabled}
::= { snMspsConfig 20 }
snMspsConfigSwitchSnifferBarrierEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable Monitor Barrier functionality. If disabled the mirror destination
port is also part of the switching engine "
DEFVAL {enabled}
::= { snMspsConfig 25 }
--snMspsConfig 21-26 reserved for future extensions
snMspsConfigSwitchTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show/Set -MM/DD/YYYY hh:mm:ss- date and time of the switch."
::= { snMspsConfig 27 }
snMspsConfigurationSaveMode OBJECT-TYPE
SYNTAX INTEGER {
trailmode(1),
autosave(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to 'autosave(2)', all nonvolatile configuration parameters
are saved automaticly to flash after configuration changes. In 'trailmode (1)' save
must be triggered manually. Autosave mode may not be available on all devices.
In this case, 'wrong value' error will be returned, when trying to set 'autosave(2)'"
DEFVAL { trailmode }
::= { snMspsConfig 28 }
snMspsInitiateConfigSave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set as 'true' switch configurations save operation is
initiated.
As soon as the configuration save operation is completed, the value
of this object reverts back to 'false'.
All the configurations made via the three interfaces
viz.
-> commandline interface
-> Web Interface
-> SNMP interface
are saved either in 'Startup Configuration File' in the flash or
in the specified 'issConfigSaveFileName' in the flash or
in the chosen remote system, depending upon 'ConfigSaveOption'."
DEFVAL { false }
::= { snMspsConfig 29 }
snMspsConfigLastSynchronisationTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MM/DD/YYYY hh:mm:ss- This is the time when the system time is last synchronized.
It return zero length value if the system time is not yet synchronized."
::= { snMspsConfig 30 }
snMspsConfigChangesSaved OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value 'true' means there are no configuration changes that are not saved.
Otherwise it will have the value 'false'."
DEFVAL { true }
::= { snMspsConfig 31 }
snMspsConfigurationAutoRestartTimer OBJECT-TYPE
SYNTAX INTEGER (0|300..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When setting to time interval in seconds, device will perform restart
automatically after the time interval is expired.
Setting 0 will cancel any timer, which was previously set"
DEFVAL { 0 }
::= { snMspsConfig 32 }
snMspsEnhancedPassiveListeningCompatibility OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables Enhance Passive Listening Compatibility mode on this device.
If port wise configuration is supported, the port specific object
<snMspsPortEnhPassListComp> must be configured for each port in order to support the feature."
DEFVAL {disabled}
::= { snMspsConfig 35 }
snMspsConfigVrrpAcceptPing OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable ability to accept pings to associated ip addresses"
DEFVAL {disabled}
::= { snMspsConfig 41}
snMspsOperLoginPasswordPolicy OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the password policy which is enforced to users when determining their password.
Low - password should contain minimum 6 characters,
Medium - not supported,
High - password should contain minimum 8 characters, minimum 1 upper case character,
minimum 1 special character, and minimum 1 number."
DEFVAL {high}
::= { snMspsConfig 60 }
snMspsConfigLoginPasswordPolicy OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the password policy which is enforced to users when determining their password.
Low - password should contain minimum 6 characters,
Medium - not supported,
High - password should contain minimum 8 characters, minimum 1 upper case character,
minimum 1 special character, and minimum 1 number."
DEFVAL {high}
::= { snMspsConfig 61 }
-- ----------------------------------------------------------------
-- MSPS Objects: USERS MIB
-- ----------------------------------------------------------------
snMspsLoginUsers OBJECT IDENTIFIER ::= { snMspsConfig 65 }
snMspsLoginUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoginUsersTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the login usernames and privileges, which are currently created."
::= { snMspsLoginUsers 5 }
snMspsLoginUsersTableEntry OBJECT-TYPE
SYNTAX SnMspsLoginUsersTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"user table entry"
INDEX { snMspsLoginUserName }
::= { snMspsLoginUsersTable 1 }
SnMspsLoginUsersTableEntry ::= SEQUENCE {
snMspsLoginUserName DisplayString,
snMspsLoginUserPrivilege Integer32,
snMspsLoginUserRemoteAccess Integer32
}
snMspsLoginUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User Name which is used as index of the snMspsLoginUserTable. "
::= { snMspsLoginUsersTableEntry 1 }
snMspsLoginUserPrivilege OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Privilege"
::= { snMspsLoginUsersTableEntry 2 }
snMspsLoginUserRemoteAccess OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Access Filter . Value 0 means its allowed to access."
::= { snMspsLoginUsersTableEntry 3 }
-- ------------------------------------
-- Config Backup Configuration Group
-- ------------------------------------
snMspsConfigBackup OBJECT IDENTIFIER ::= { snMspsConfig 100 }
snMspsConfigBackupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsConfigBackupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to display and to control the configuration pack backup."
::= { snMspsConfigBackup 10 }
snMspsConfigBackupEntry OBJECT-TYPE
SYNTAX SnMspsConfigBackupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each configuration pack."
INDEX { snMspsConfigBackupIndex }
::= { snMspsConfigBackupTable 1 }
SnMspsConfigBackupEntry ::=
SEQUENCE {
snMspsConfigBackupIndex Integer32,
snMspsConfigBackupFileName DisplayString,
snMspsConfigBackupFileSize Integer32,
snMspsConfigBackupOperation INTEGER,
snMspsConfigBackupStatus RowStatus
}
snMspsConfigBackupIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The auxiliary number of corresponding entry
representing settings of each config backup."
::= { snMspsConfigBackupEntry 1 }
snMspsConfigBackupFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The file name of configuration backup."
::= { snMspsConfigBackupEntry 4 }
snMspsConfigBackupFileSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file size in kilobytes of configuration backup."
::= { snMspsConfigBackupEntry 7 }
snMspsConfigBackupOperation OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
restore(1),
in-progress(2),
not-enough-storage(3),
error(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a trigger and status variable.
Write access using restore(1), initiates restore of corresponding backup
configuration. After the operation is completed, the object will return idle(0).
Write access using other values as restore(1) will cause 'bad value' error.
Read access will return following values:
0 - No action in performing or last action was successfull.
2 - Last initiated action (restore or create new backup) is in progress.
3 - No enough free memory to create new configuration backup.
4 - Internal error during last action."
::= { snMspsConfigBackupEntry 50 }
snMspsConfigBackupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a control variable.
It controls the instantiation of a conceptual row
in snMspsConfigBackupTable.
The new row cannot be activated as long as
snMspsConfigBackupFileName is not set."
::= { snMspsConfigBackupEntry 100 }
snMspsConfigSourceIpVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the LoopBack IP interface VLAN ID (1 to 4094).
Non-Zero IPv4/IPv6 Address of this LoopBack interface will be
used as Source Address for management communication.
Using of Loopback IP as source IP is applicable for Syslog,
SMTP, NTP, SNTP, Radius and SNMP Packets generated from this
device.
If snMspsConfigSourceIpVlanId is 0, then this feature
is disabled.
If snMspsConfigSourceIpVlanId in non-zero,
and if the corresponding Loopback interface has IPv4 Address as
0.0.0.0, then this feature is disabled for all IPv4 management
communication.
If the loopback interface does not have an
active IPv6 Global Address, then this feature is disabled for
all IPv6 management communication."
DEFVAL {0}
::= { snMspsConfig 101 }
-- snMspsIfMainTable
-- This table is used for the management of all the interfaces in the
-- system.
snMspsIfMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table can be used
to monitor all the interface types. However only virtual and
logical interfaces could be created via this table.
Physical interfaces were created automatically during system initialization
and cannot be added or removed. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex."
::= { snMspsIf 4 }
snMspsIfMainEntry OBJECT-TYPE
SYNTAX SnMspsIfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { snMspsIfMainIndex }
::= { snMspsIfMainTable 1 }
SnMspsIfMainEntry ::=
SEQUENCE {
snMspsIfMainIndex InterfaceIndex,
snMspsIfMainType INTEGER,
snMspsIfMainMtu Integer32,
snMspsIfMainAdminStatus INTEGER,
snMspsIfMainOperStatus INTEGER,
snMspsIfMainEncapType INTEGER,
snMspsIfMainBrgPortType INTEGER,
snMspsIfMainRowStatus RowStatus,
snMspsIfMainSubType INTEGER
}
snMspsIfMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { snMspsIfMainEntry 1 }
snMspsIfMainType OBJECT-TYPE
SYNTAX INTEGER {
rfc877x25(5), -- X.25
ethernetCsmacd(6), -- Ethernet/802.3
iso88025TokenRing(9), -- Token Ring
ppp(23), -- PPP link
softwareLoopback(24), -- Loopback Interface
frameRelay(32), -- Frame Relay DTE port
miox25(38), -- multiprotocol over x.25
-- used for X.25 VCs
aal5(49), -- AAL5 over ATM
propVirtual (53), -- Proprietary Virtual Interface
async(84), -- ASYNC
frameRelayMPI(92), -- multiprotocol
-- over FR
-- used for FR VCs
-- and sub-interfaces
pppMultilinkBundle(108), -- PPP Multilink
-- Bundle
ipOverAtm(114), -- IPoA virtual
hdlc(118), -- HDLC port
tunnel(131), -- Encapsulation interface
atmSubInterface(134), -- VCs under IPoA
l3ipvlan(136), -- Layer3 VLAN interface
mplsTunnel (150), -- MPLS Tunnel Virtual Interface
ieee8023ad(161), -- Link Aggregation Mib
mpls (166), -- MPLS
brgPort(209), -- Bridge port used for creating virtual ports in PBB
ilan(247), -- Internal-lan
pip (248) -- Virtual (Internal) Provider Instance port
} -- These are the currently supported
-- interfaces. More can be added at a
-- later time.
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type/protocol of interface. Specification of
the object is mandatory for all interfaces. This
value should be specified after the row creation
in the snMspsIfMainTable and before setting any other
object in this table. Once the type is specified,
it cannot be changed - the interface should be
deleted for changing the type of the interface.
The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49),
async(84) and hdlc(118) are physical interfaces while
all other types are virtual or logical interfaces.
Specific ifIndex ranges are reserved for different interface types.
Creation of different types of interfaces is possible only within
their corresponding ifIndex range. So the snMspsIfMainType should be
configured corresponding to the ifIndex range reserved for that
particular interface type.
pip interface type will be used vritual Provider Instance port in
PBB bridge mode. physical PIPs can be created using ethernetCsmacd .
Following is the mapping of different port types and there snMspsIfMaintype values.
External ports
--------------
Port: snMspsIfMaintype Port type
-------------------------------------------------------------------
CNP- Ctagged 6 - customerNetworkPortCtagged (9)
CNP - Port based 6 - customerNetworkPortPortBased (2)
CNP- Stagged 6 - customerNetworkPortStagged (3)
PNP 6 - providerNetworkPort (1)
PIP 6 - providerInstancePort (11)
CBP 6 - customerBackbonePort (12)
Internal ports
--------------
VIP 209 - virtualInstancePort (10)
PIP 248 - providerInstancePort (11)
CBP 209 - customerBackbonePort (12)
brgPort will be used to create virtual PBB ports other than PIPs- VIPs and CBPs.
The propVirtual type denotes properietary logical interfaces. These
type of interfaces can be associated with a {physical interface,
switch instance} for the purpose of sharing the physical interface
to more than one context and thus realising Switch Instance Sharing
of a physical interface."
::= { snMspsIfMainEntry 2 }
snMspsIfMainMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MTU for the interface as shown to the higher
interface sub-layer (this value should not include
the encapsulation or header added by the interface).
If IP is operating over the interface, then this
value indicates the IP MTU over this interface.
For changing the MTU of any interface, the interface
must be brought down first - changing MTU while the
interface is administratively up is not permitted.
If not specified during interface creation, a default
value is assigned based on the snMspsIfMainType given to
the particular interface.
While configuring for logical VLAN interfaces, care
should be taken to, configure this value as the
lowest of the MTU values of the member ports."
::= { snMspsIfMainEntry 3 }
snMspsIfMainAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the interface. This object
can be set only when the snMspsIfMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
The testing(3) state indicates that no operational
packets can be passed - this state is not currently
supported.
When a managed system initializes, all
interfaces start with snMspsIfMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, snMspsIfMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state)."
DEFVAL { down }
::= { snMspsIfMainEntry 4 }
snMspsIfMainOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status can not be
-- determined for
-- some reason.
dormant(5),
notPresent(6), -- some component is
-- missing
lowerLayerDown(7) -- down due to state
-- of lower-layer
-- interface(s).
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
If snMspsIfMainAdminStatus is down (2)
then snMspsIfMainOperStatus would be down (2). If
snMspsIfMainAdminStatus is changed to up (1) then
snMspsIfMainOperStatus should change to up (1) if the
interface is ready to transmit and receive
work traffic; it should change to dormant (5)
the interface is waiting for external actions
(such as a serial line waiting for an incoming
connection); it should change to lowerLayerDown(7)
state if it cannot be made up as the interface sub-layer
below it is down; it should remain in the down (2) state
if and only if there is a fault that prevents it
from going to the up (1) state; it should remain in
the notPresent (6) state if the interface has
missing (typically, hardware) components.
The status unknown(4) is shown when it is not possible
to determine the exact status of the interface - e.g.
the interface sub-layer is performing negotiations -
during this period the interface is not up but at the
same time, it is not a fault condition and hence it
cannot be shown as down - in such periods the status
is shown as unknown.
This object has the semantics of the ifOperStatus of the
standard ifTable."
::= { snMspsIfMainEntry 5 }
snMspsIfMainEncapType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nlpid(2), -- NLPID based encap
-- in the case of FR
-- and multiplexed
-- NLPID encap for X.25
nlpidSnap(3), -- NLPID-SNAP based
-- encap in the case
-- of FR and multiplexed
-- NLPID-SNAP encap for
-- X.25.
cudNlpid(4), -- dedicated NLPID for
-- X.25 only
cudNlpidSnap(5), -- dedicated
-- NLPID-SNAP for
-- X.25 only
llcSnap(6), -- for ATM VCs only
vcMultiplexed(7), -- for ATM VCs only
ethernetV2(8) -- for Ethernet interfaces
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation type to be used over the interface.
For Ethernet interfaces, the default encapsulation
type is ethernetV2(8). The other possible encapsulation
is llcSnap(6). If other(1) is specified then an
automatic encapsulation type learning method is used
in ARP for determining the encapsulation for unicast
destinations while the multicast and broadcast destinations
use ethernetV2(8).
For PPP and MLPPP interfaces, the encapsulation type can
only be other(1) and this is the default value.
For FR VCs, the value can be nlpid(2) (for carrying protocols
which have NLPID) or nlpidSnap(3) (for other protocols). The
default is nlpid(2) and the types of protocols supported are
inferred from the stack-layering implemented over the
interface.
For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3)
(where the VC can carry multiplexed protocol traffic with
each data packet containing the NLPID or SNAP header) or
cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies
the NLPID of the protocol or SNAP and the data packets do
not contain these headers - for dedicated VCs). The default
is cudNlpid(4).
For ATM VCs, the default is llcSnap(6) but the
vcMultiplexed(7) encapsulation is also supported.
This object is not applicable to other interfaces."
::= { snMspsIfMainEntry 6 }
snMspsIfMainBrgPortType OBJECT-TYPE
SYNTAX INTEGER {
providerNetworkPort (1),
customerNetworkPortPortBased (2),
customerNetworkPortStagged (3),
customerEdgePort (4),
propCustomerEdgePort (5),
propCustomerNetworkPort (6),
propProviderNetworkPort (7),
customerBridgePort (8),
customerNetworkPortCtagged (9),
virtualInstancePort (10),
providerInstancePort (11),
customerBackbonePort (12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Bridge port type of this specified switch port.
Bridge Port type can be specified only for switch ports and not for
router ports, IVR interfaces and I-LAN Interfaces.
providerNetworkPort - Port Connected to a single Provider.
SVLAN Classification is based on only the PVID configured for the
port for untagged packets.
customerNetworkPortPortBased - Port in the S-VLAN component that
can transmit or received frames for single customer.
All packets received on this port, are mapped to one single service
instance identified by the PVID of that Port.
Acceptable Port Type will be always Admit only Untagged or Priority
Tagged Frames on this port.
customerNetworkPortStagged - Port in the S-VLAN component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the S-tag
received or on the PVID of the port. Ingress Filtering will be
always enabled on this port.
customerEdgePort - Port in a Provider Edge Bridge connected to a
single customer. Multiple services can be provide on this port.
The Packets received on this interface will be first classified
to a CVLAN. CVLAN classification can be based on the Vid
in the C-Tag present in the packet (if it C-tagged packet) or from
the pvid of the port. Service instance selection (S-VLAN selection)
for a frame is done based on the entry present in the C-VID
registration table for the pair (C-VID, reception Port).
CustomerEdgePort configuration is allowed only in Provider Edge
Bridges.
propCustomerEdgePort - Port connected to a single customer, where
multiple services can be provided based on only Proprietary SVLAN
classification tables. S-VLAN classification will not happen based on
C-VID registration table on this port. propCustomerEdgePort
configuration is allowed only in Provider Edge Bridges.
propCustomerNetworkPort - Port connected to a single customer, where
multiple service can be provided based on CVLANs by assigning one of
the Proprietary SVLAN classification tables to this port. The
services can also be assigned using other proprietary SVLAN
classification tables where CVLAN is not the index of the table.
propProviderNetworkPort - Port connected to a Q-in-Q Bridge located
inside Provider Network. This port is part of S-VLAN component.
If packets to be tagged and sent out of this port will have 0x8100
as the ether type. Similarly pakcets with standard Q tag (ether type
as 0x8100) received will be considered as S-Tagged packets.
customerBridgePort - Type of the port to be used in customer
bridges as well in Provider(Q-in-Q) bridges. This type is not valid
in Provider Core bridges as well as Provider Edge bridge.
customerNetworkPortCtagged - Port in the I component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the C-tag
received or on the default CVID of the port. Ingress Filtering will be
always enabled on this port.
virtualInstancePort - A Bridge Port on an I-component in a Backbone Edge Bridge
that provides access to a single backbone service instance.
providerInstancePort - The set of Virtual Instance Ports that are supported
by a single instance of the device.
customerBackbonePort - A Backbone Edge Bridge Port that can receive and transmit
I-tagged frames for multiple customers, and assign B-VIDs and translate I-SID on
the basis of the received I-SID.
In Customer bridges and in Provider Bridges only customerPort option
is allowed.
In Provider backbone bridge only customerNetworkPort, providerNetworkPort
and customerBackbonePort type of ports are allowed.
Bridge Port Type cannot be set for a port-channel port, if some
physical ports are aggregated in it.
Also Bridge Port type cannot be set for a port, if part of a
port-channel.
Whenever the Bridge port type changes, the previous configuration
associated with the port will be flushed.
For example.
whenever CNP(STagged) and PNP port types are changed to any
other port type,
- The unicast entries learnt on this port and
- The VID translation table entries associated with the port
will be flushed.
Whenever CEP port type is changed to any other port type,
- The unicast entries learnt on this port
- The C-VID registration table entries associated with the port
- The PEP configuration table entries
- The service priority regeneration table entries
will be flushed.
Even the vlan membership of the port will be removed when the
Pbport type is changed."
DEFVAL { 8 }
::= { snMspsIfMainEntry 7 }
snMspsIfMainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A RowStatus variable for addition (except for physical interfaces),
deletion (except for physical interfaces ) and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is active, the interface is created and
ready to use in the respective protocol modules.
When the status is notInService, the interface has not been
registered with the respective protocol modules and as such
those modules are not aware of the existence of the interface
- creation is hence, incomplete. Setting an active interface
to notInService results in de-registration/deletion of the
interface from the respective protocol modules and all the
configurations associated with that interface in those modules
may be lost.
Deletion of an interface, may affect the status of other
interfaces which are layered above or below it in the Interface
Stack (ifStackTable) and may result in other interfaces being
made notReady or notInService."
::= { snMspsIfMainEntry 8 }
snMspsIfMainSubType OBJECT-TYPE
SYNTAX INTEGER {
extremeEther(251),
fastEther(252),
gigabitEthernet(253)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object stores the subType value of the specified interface.
Configuration of this object is not mandatory.By default
Sub type value will be updated based on the hardware link speed."
::= { snMspsIfMainEntry 9 }
-- snMspsIfIpTable
-- This table is used for the management of the interfaces in the
-- system which are registered with IP.
snMspsIfIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system.
This table is a extension to the snMspsIfMainTable.
The index to this table has the semantics of
the snMspsIfMainIndex of the snMspsIfMainTable.
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed."
::= { snMspsIf 5 }
snMspsIfIpEntry OBJECT-TYPE
SYNTAX SnMspsIfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface over which IP is operating."
INDEX { snMspsIfMainIndex }
::= { snMspsIfIpTable 1 }
SnMspsIfIpEntry ::=
SEQUENCE {
snMspsIfIpAddrAllocMethod INTEGER,
snMspsIfIpAddr IpAddress,
snMspsIfIpSubnetMask IpAddress,
snMspsIfIpBroadcastAddr IpAddress,
snMspsIfIpForwardingEnable TruthValue,
snMspsIfIpAddrAllocProtocol INTEGER,
snMspsIfIpInterfaceName DisplayString
}
snMspsIfIpAddrAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
manual(1), -- To be set by Manager
negotiation(2), -- obtained from peer
dynamic(3),
none(4) -- none of the above
} -- Currently only
-- these method possible.
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism to be used for allocation of IP
address for this interface.
The value negotiation can be used only for PPP
and MLPPP interfaces which support obtaining of
IP addresses through negotiation.
The dynamic(3) option takes an IP
address dynamically from the available
server (dhcp/bootp/rarp) according to the
protocol specified in snMspsIfIpAddrAllocProtocol.
If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered interface."
DEFVAL { none }
::= { snMspsIfIpEntry 1 }
snMspsIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the interface is
not a network interface then the default value
of 0.0.0.0 is assigned and the interface is
treated as a un-numbered interface by IP."
DEFVAL { '00000000'H }
::= { snMspsIfIpEntry 2 }
snMspsIfIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { snMspsIfIpEntry 3 }
snMspsIfIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP broadcast address for this
interface. The value should be specified only
for network interfaces and any valid broadcast
address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { snMspsIfIpEntry 4 }
snMspsIfIpForwardingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether IP forwarding is enable on
this interface. Disabling IP forwarding on an
interface will result in packets which are to
be forwarded on that interface being dropped
and ICMP error messages being generated for the
packets."
DEFVAL { true }
::= { snMspsIfIpEntry 5 }
snMspsIfIpAddrAllocProtocol OBJECT-TYPE
SYNTAX INTEGER {
rarp(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the protocol to be used to obtain
IP address for this interface. This object is
valid only when snMspsIfIpAddrAllocMethod is set to
dynamic (3).
Currently rarp (1) option is not
supported. The assigned value will be effective
only when the interface admin status changes"
DEFVAL { dhcp }
::= { snMspsIfIpEntry 6 }
snMspsIfIpInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface name for IP interfaces"
::= { snMspsIfIpEntry 7 }
-- snMspsIfIvrTable
-- This table is used for the Inter VLAN Routing related
-- configurations for each interface such as converting Bridged interfaces
-- to Routed interfaces and vice-versa.
snMspsIfIvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interfaces in the system with IVR related
configurations.
This table is an extension to the snMspsIfMainTable. The index to
this table has the semantics of the snMspsIfMainIndex of the
snMspsIfMainTable."
::= { snMspsIf 8 }
snMspsIfIvrEntry OBJECT-TYPE
SYNTAX SnMspsIfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing IVR-related information applicable
to a interface."
INDEX { snMspsIfMainIndex }
::= { snMspsIfIvrTable 1 }
SnMspsIfIvrEntry ::=
SEQUENCE {
snMspsIfIvrBridgedIface
TruthValue,
snMspsIfIvrLoopBackIface
TruthValue
}
snMspsIfIvrBridgedIface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if this interface is a Bridged interface
or not.
A value of 'TRUE' indicates that this interface is
a Bridged interface and is capable of performing
bridging of packets through this interface.
A value of 'FALSE' indicates that this
interface is a Routed interface and is capable of
performing routing of packets through this interface."
::= { snMspsIfIvrEntry 1 }
snMspsIfIvrLoopBackIface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if this interface is a IVR Loopback interface
or not.
A value of 'TRUE' indicates that this IVR interface is
a Loopback Interface.
A value of 'FALSE' indicates that this IVR
interface is not a Loopback interface."
DEFVAL { false }
::= { snMspsIfIvrEntry 2 }
-- snMspsIfSecondaryIpAddressTable
-- This table is to configure secondary ip address over the interfaces
-- registered with IP.
snMspsIfSecondaryIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfSecondaryIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of secondary IP addresses configured over the
interfaces registered with IP.
This table is a extension to the snMspsIfMainTable.
The index to this table has the semantics of
the snMspsIfMainIndex of the snMspsIfMainTable.
Secondary IpAddress configuration should not override the
primary ip address configured for any of the interface
Updation of entries in this table are not allowd when
RowStatus is active"
::= { snMspsIf 11 }
snMspsIfSecondaryIpAddressEntry OBJECT-TYPE
SYNTAX SnMspsIfSecondaryIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information associated with the
secondary(additional) ip address configured to a particular
interface."
INDEX { snMspsIfMainIndex , snMspsIfSecondaryIpAddress}
::= { snMspsIfSecondaryIpAddressTable 1 }
SnMspsIfSecondaryIpAddressEntry ::=
SEQUENCE {
snMspsIfSecondaryIpAddress IpAddress,
snMspsIfSecondaryIpSubnetMask IpAddress,
snMspsIfSecondaryIpBroadcastAddr IpAddress,
snMspsIfSecondaryIpRowStatus RowStatus,
snMspsIfSecondaryIpInterfaceName DisplayString
}
snMspsIfSecondaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Secondary IP address associated with the
interface"
::= {snMspsIfSecondaryIpAddressEntry 1 }
snMspsIfSecondaryIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask associted with the
secondary ip address configuration. The value should be
specified only for network interfaces and any valid
VLSM is accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { snMspsIfSecondaryIpAddressEntry 2 }
snMspsIfSecondaryIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP broadcast address associated with
the configured secondary IP address. The value should be
specified only for network interfaces and any valid
broadcast address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { snMspsIfSecondaryIpAddressEntry 3 }
snMspsIfSecondaryIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to manage creation and deletion of rows
in this table."
::= { snMspsIfSecondaryIpAddressEntry 4 }
snMspsIfSecondaryIpInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface name for secondary IP interfaces"
::= { snMspsIfSecondaryIpAddressEntry 5 }
-- snMspsIfOverviewIpAddressTable
-- This table is to display primary and secondary ip addresses over the interfaces
-- registered with IP.
snMspsIfOverviewIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfOverviewIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of primary and secondary IP addresses configured over the
interfaces registered with IP."
::= { snMspsIf 15 }
snMspsIfOverviewIpAddressEntry OBJECT-TYPE
SYNTAX SnMspsIfOverviewIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information associated with the primary and
secondary(additional) ip addresses configured to a particular
interface."
INDEX { snMspsIfMainIndex , snMspsIfOverviewIpAddress}
::= { snMspsIfOverviewIpAddressTable 1 }
SnMspsIfOverviewIpAddressEntry ::=
SEQUENCE {
snMspsIfOverviewIpAddress IpAddress,
snMspsIfOverviewIpSubnetMask IpAddress,
snMspsIfOverviewIpBroadcastAddr IpAddress,
snMspsIfOverviewIpType INTEGER,
snMspsIfOverviewIpAddressACDStatus INTEGER
}
snMspsIfOverviewIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Shows primary and secondary IP addresses associated with the
interface"
::= {snMspsIfOverviewIpAddressEntry 1 }
snMspsIfOverviewIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the IP Subnet Mask associted with the
primary and secondary ip addresses configuration."
::= { snMspsIfOverviewIpAddressEntry 2 }
snMspsIfOverviewIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the IP broadcast address associated with
the configured primary and secondary IP addresses."
::= { snMspsIfOverviewIpAddressEntry 3 }
snMspsIfOverviewIpType OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows IP address type: primary or secondary."
DEFVAL { secondary }
::= { snMspsIfOverviewIpAddressEntry 4 }
snMspsIfOverviewIpAddressACDStatus OBJECT-TYPE
SYNTAX INTEGER {
acdStatusIdle(0),
acdStatusStarting(1),
acdStatusConflict(2),
acdStatusDefending(3),
acdStatusActive(4),
acdStatusNotSupported(5),
acdStatusDisabled(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows IPV4 Address Collision Detection Status."
::= { snMspsIfOverviewIpAddressEntry 5 }
-- snMspsIfIvrMappingTable
-- Mapping of multiple Vlans to IVR interfaces.
snMspsIfIvrMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIfIvrMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the list of vlans to be
associated for an IVR interface.
The primary Index to this table can only be a IVR interface.
Only considered if device supports corresponding functionality,
otherwise any set operation will fail with an inconsistentValue error
and get will return empty."
::= { snMspsIf 18 }
snMspsIfIvrMappingEntry OBJECT-TYPE
SYNTAX SnMspsIfIvrMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table gives an assoicated vlan to an IVR
interface."
INDEX { snMspsIfMainIndex, snMspsIfIvrAssociatedVlan }
::= { snMspsIfIvrMappingTable 1 }
SnMspsIfIvrMappingEntry ::=
SEQUENCE {
snMspsIfIvrAssociatedVlan VlanId,
snMspsIfIvrMappingRowStatus RowStatus
}
snMspsIfIvrAssociatedVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies one of the associated VLANs for a given
IVR interface. Vlan Id associated with an IVR interface during
IVR interface creation, should not be configured as
snMspsIfIvrAssociatedVlan for that IVR interface.
snMspsIfIvrAssociatedVlan and the primary vlan (vlan associated with
IVR during IVR creation) for an IVR interface should be in the
same Layer 2 context."
::= { snMspsIfIvrMappingEntry 1 }
snMspsIfIvrMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the Row Status for port isolation table entry.
Only 'CreateAndGo' and 'destroy' values are allowed for this
object. 'CreateAndWait' and 'notInService' values are not allowed.
Example:
To add vlans 2, 3 as associated vlans to an IVR interface with
interface index as 10 in this table, the following sequence
to be followed:
1. Set the snMspsIfIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 2)
2. Set the snMspsIfIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 3)
To delete vlan 3 from the list of associated vlans for an IVR
interface with IfIndex = 10 ports, do the following:
Set the snMspsIfIvrMappingRowStatus as 'destroy' for the
entry with index
(snMspsIfMainIndex = 10, snMspsIfIvrAssociatedVlan = 3)."
::= { snMspsIfIvrMappingEntry 2 }
-- --------------------------------------------------------------
-- SIMATIC NET MSPS SPECIFIC PORT MIB
-- --------------------------------------------------------------
-- --------------------------------------------------------------
-- PortTable Sub-Group
-- --------------------------------------------------------------
snMspsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects in the form of private
extensions of interface objects."
::= { snMspsPort 90 }
snMspsPortEntry OBJECT-TYPE
SYNTAX SnMspsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects at the
subnetwork layer and below for a particular
interface."
INDEX { snMspsPortIndex }
::= { snMspsPortTable 1 }
SnMspsPortEntry ::= SEQUENCE {
snMspsPortIndex INTEGER,
snMspsPortFaultMaskState INTEGER,
snMspsPortLockState INTEGER,
snMspsPortFlowControlStatus TruthValue,
snMspsPortStandbyMaskState INTEGER,
snMspsPortBroadcastBlocking INTEGER,
snMspsPortDcpConfig INTEGER,
snMspsPortUnknownMulticastBlocking INTEGER,
snMspsPortActive TruthValue,
snMspsPortUnknownUnicastBlocking INTEGER,
snMspsPortMediaType INTEGER,
snMspsPortEnhPassListComp INTEGER,
snMspsPortQoSTrustMode INTEGER,
snMspsPortBlockState INTEGER,
snMspsPortRouterAdvertisementBlocking INTEGER,
snMspsPortAdminMacLearningStatus TruthValue,
snMspsPortMacLearningFlush INTEGER
}
snMspsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..26)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique number for each interface. The number is in the range
1 to 26. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsPortEntry 1 }
snMspsPortFaultMaskState OBJECT-TYPE
SYNTAX INTEGER {
checked-link-down(1),
notChecked(2),
checked-link-up(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask for checking link state of the port.
If a link of a masked as link down (checked-link-down) port
is down then a fault will be generated. If a link of a masked
as link up (checked-link-up) port is up then
a fault will be generated."
DEFVAL {notChecked}
::= { snMspsPortEntry 2 }
snMspsPortLockState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Lock state of the port.
disabled (1) - MAC Learning and Forwarding enabled. Dynamic entries can be added.
enabled (2) - MAC Learning and Forwarding disabled. Dynamic entries alter to static."
DEFVAL {disabled}
::= { snMspsPortEntry 3 }
snMspsPortFlowControlStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of Flow Control on the port returned from the hardware"
::= { snMspsPortEntry 4 }
snMspsPortStandbyMaskState OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask for standby ports."
::= { snMspsPortEntry 6 }
snMspsPortBroadcastBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable broadcast blocking. Used to select which ports are
prevented from being forwarded broadcast packets."
::= { snMspsPortEntry 7 }
snMspsPortDcpConfig OBJECT-TYPE
SYNTAX INTEGER {
rxOnly(2),
txAndRx(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administratively desired behavior of the device for DCP frames.
If the associated snMspsPortDcpConfig object has a
value of 'rxOnly(2)', then the device will receive,
but it will not transmit DCP frames on this port.
If the associated snMspsPortDcpConfig object has a
value of 'txAndRx(3)', then the device will transmit
and receive DCP frames on this port."
::= { snMspsPortEntry 8 }
snMspsPortUnknownMulticastBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable unknown multicast blocking. Used to select which ports are
prevented from being forwarded multicast packets to unknown multicast addresses."
::= { snMspsPortEntry 9 }
snMspsPortActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to false(2) forces link down on this ports and its connected devices."
::= { snMspsPortEntry 10 }
snMspsPortUnknownUnicastBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable unknown unicast blocking. Used to select which ports are
prevented from being forwarded unicast packets to unknown unicast addresses."
::= { snMspsPortEntry 11 }
snMspsPortMediaType OBJECT-TYPE
SYNTAX INTEGER {
not-available(0),
auto(1),
copper(2),
optical(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the currently active media type of the combo port.
Write access is only allowed for combo ports, i.e. ports that consist
of both a copper port and an optical port.
not-available(0) - the port is not a combo port; configuration of media type is not possible
auto (1) - the media type that has a connection is used; if both ports are connected, the optical port is preferred
copper (2) - the copper port is used
optical (3) - the optical port is used"
::= { snMspsPortEntry 12 }
snMspsPortEnhPassListComp OBJECT-TYPE
SYNTAX INTEGER {
not-available(0),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables Enhanced Passive listening Compatibility mode on a specific port.
The global object snMspsEnhancedPassiveListeningCompatibility
must be configured accordingly to activate this configuration.
If the functionality is not available on corresponding device,
not-available(0) will be returned and no other value can be set."
DEFVAL {disabled}
::= { snMspsPortEntry 13 }
snMspsPortQoSTrustMode OBJECT-TYPE
SYNTAX INTEGER
{
not-available(0),
untrust(1),
trustcos(2),
trustdscp(3),
trustcos-dscp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
not-available (0) - the port qos trust mode is not supported
untrust (1) - packet qos parameters are assigned as per
port default priority settings
trust-cos (2) - if the packet is tagged the qos parameters
are assigned according to User Priority field, else like untrust
trust-dscp (3) - if the packet is IPv4/IPv6 qoS parameters
are assigned to the Dscp field or remapped Dscp, else like untrust
trust-cos-dscp (4) - if the packet is IPv4/IPv6 the packet is assigned like trustdscp
else if the packet is tagged like trustcos else like untrust"
::= { snMspsPortEntry 14 }
snMspsPortBlockState OBJECT-TYPE
SYNTAX INTEGER
{
not-available (0),
forwarding (1),
ring-redundancy (2),
spanning-tree (3),
loop-detected (4),
down-in-bundle (5),
la-loop-detected (6),
la-spanning-tree (7),
link-down (8),
admin-down (9),
power-down (10),
standby (11),
link-check (12),
mrp-interconnection (13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
not-available (0) - the port block state analysis is not supported
forwarding (1) - not blocked by any configuration or protocol
ring-redundancy (2) - blocked as per ring-redundancy state assigned
spanning-tree (3) - blocked as per spanning-tree state assigned
loop-detected (4) - blocked as per loop-detection state assigned
down-in-bundle (5) - blocked as member of an aggregation
la-loop-detected (6) - blocked as per loop-detection state of LA
la-spanning-tree (7) - blocked as per spanning-tree state of LA
link-down (8) - blocked as per operative link state
admin-down (9) - blocked as per configured admin state
power-down (10) - blocked as per configured power state
standby (11) - blocked as per standby state assigned
link-check (12) - blocked as per link-check state assigned
mrp-interconnection (13) - blocked as per mrp-interconnection state assigned"
::= { snMspsPortEntry 15 }
snMspsPortRouterAdvertisementBlocking OBJECT-TYPE
SYNTAX INTEGER {
not-available (0),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
not-available (0) - Ipv6 Router Advertisements blocking not supported
enabled (1) - Ipv6 Router Advertisements blocking enabled
disabled (2) - Ipv6 Router Advertisements blocking disabled"
::= { snMspsPortEntry 20 }
snMspsPortAdminMacLearningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
Truth value used to configure the unicast MAC learning Admin status
for the port.
Value true (1), allows the unicast MAC learning on the port.
Value false(2), disables the unicast MAC learning on the port.
Status can not be set to false (2), if the device does not
support this feature"
DEFVAL { true }
::= { snMspsPortEntry 25 }
snMspsPortMacLearningFlush OBJECT-TYPE
SYNTAX INTEGER {
not-available(0),
disabled (1),
port-flush (2),
full-flush (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
not-available (0) - This feature is not supported.
disabled (1) - On link down, learnt MAC will not be flushed
port-flush (2) - On link down, learnt MAC will be flushed only on this port
full-flush (3) - On link down, learnt MAC will be flushed for the entire switch"
::= { snMspsPortEntry 30 }
snMspsTrapMSTPNewRootbridgeDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"(M)STP new Rootbridge detected."
::= 251
snMspsTrapMSTPTopChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"(M)STP Topologychange detected."
::= 252
snMspsTrapPnacPortAuthStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Pnac port auth state change notification."
::= 451
snMspsTrapRmActiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Redundancy manager entered active state."
::= 1451
snMspsTrapRmPassiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Redundancy manager entered passive state."
::= 1452
snMspsTrapStandbyActiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Standby manager entered active state."
::= 1501
snMspsTrapStandbyPassiveState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Standby manager entered passive state."
::= 1502
snMspsTrapWlanGeneric TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"A generic WLAN event occured."
::= 1751
snMspsTrapWlanNewOverlapAp TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"New Overlap-AP found"
::= 1752
snMspsTrapWlanOverlapApAgedOut TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Overlap-AP aged out"
::= 1753
snMspsTrapWlanWdsUp TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"WDS interface is up"
::= 1754
snMspsTrapWlanWdsDown TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"WDS interface is down"
::= 1755
snMspsTrapWlanRadarDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"DFS radar interference event occured"
::= 1756
snMspsTrapWlanRadarAgedOut TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"DFS channel aged out"
::= 1757
snMspsTrapWlanRadiusAccessAccepted TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"RADIUS: access from a client accepted"
::= 1758
snMspsTrapWlanRadiusAccessRejected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"RADIUS: access request from a client rejected"
::= 1759
snMspsTrapWlanAuthToAPFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: Authentication on AP failed"
::= 1761
snMspsTrapWlanAssociatedToAP TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: successfully associated to AP"
::= 1763
snMspsTrapWlanAssociationToAPFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: Association failed"
::= 1764
snMspsTrapWlanDisassociatedFromAP TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: disassociated from AP"
::= 1765
snMspsTrapWlanDisassociationFromAPFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: Disassotiation failed"
::= 1766
snMspsTrapWlanAuthenticationFromClientFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"AP: Client authentication failed"
::= 1767
snMspsTrapWlanClientDeauthenticated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: deauthenticated from AP"
::= 1768
snMspsTrapWlanClientAuthenticated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: authenticated to AP"
::= 1769
snMspsTrapWlanClientAssociated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: associated to AP"
::= 1770
snMspsTrapWlanAssociationFromClientFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"AP: Client association failed"
::= 1771
snMspsTrapWlanClientDisassociated TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Client: disassociated from AP"
::= 1772
snMspsTrapWlanDisassociationFromClientFailed TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"AP: Client disassociation failed"
::= 1773
snMspsTrapWlanForcedRoaming TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Forced Roaming event occured"
::= 1774
snMspsTrapWlanIPCFMaxSta TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"iPCF: number of wireless clients too big for the cycle time"
::= 1781
snMspsTrapWlanIPCFMaxCycleTime TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"iPCF: Max. PROFINET cycle time exceeded"
::= 1782
snMspsTrapWlanIPCFMaxCyclicPollSize TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Max. size of PROFINET cyclic poll exceeded (too many PROFINET devices)"
::= 1783
snMspsTrapPowerLine1Down TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power down on line L1."
::= 1851
snMspsTrapPowerLine1Up TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power up on line L1."
::= 1852
snMspsTrapPowerLine2Down TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power down on line L2."
::= 1853
snMspsTrapPowerLine2Up TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power up on line L2."
::= 1854
snMspsTrapChangedFaultState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed fault state."
::= 1855
snMspsTrapPoEDown TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power down on line 3 (PoE)."
::= 1856
snMspsTrapPoEUp TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Power up on line L3 (PoE)."
::= 1857
snMspsTrapEnvData TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"The device entered an considerable temperature / usage value.
Variable Bindigs: Message what happened"
::= 1860
snMspsTrapServiceInformation TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Service Information occured. Variable Bindigs: Message what happened"
::= 1861
snMspsTrapCLIScriptFileStatus TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Shows the CLI Script File status that is load at startup via DHCP"
::= 1862
snMspsTrapConfigurationChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Informs user when configuration is changed"
::= 1863
snMspsTrapNTPInvalidConfiguration TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Invalid NTP Configuration."
::= 2101
snMspsTrapNTPWrongPacketLength TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet with wrong length."
::= 2102
snMspsTrapNTPWrongSourceAddress TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet from wrong Source Address."
::= 2103
snMspsTrapNTPWrongKeyId TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet with wrong or missing Key Id."
::= 2104
snMspsTrapNTPAddAuthFail TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Secure NTP failed to add authentication."
::= 2105
snMspsTrapNTPVerifyAuthFail TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Received NTP Packet failed authentication."
::= 2106
snMspsTrapNTPKeyUpdate TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"SecureNTP Keys were updated."
::= 2107
snMspsTrapVRRPStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed vrrp master state."
::= 2201
snMspsTrapLOOPDStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed LOOPD state."
::= 2251
snMspsTrapOSPFStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Device changed OSPF route state."
::= 2301
snMspsTrapMNMobileConnectionSuccess TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Mobile connection successfull."
::= 2351
snMspsTrapMNMobileConnectionFailure TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Mobile connection failed."
::= 2352
snMspsTrapMNMobileConnectionLost TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Mobile connection lost."
::= 2353
snTrapMspsLinkCheckBrokenLinkDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check disabled port because of broken link."
::= 2901
snTrapMspsLinkCheckPortEnabled TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"By Link Check disabled port is enabled again."
::= 2902
snTrapMspsLinkCheckMultiplePartners TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check detected multiple partners on port."
::= 2903
snTrapMspsLinkCheckMultiplePartnersReset TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check partner detection reset on port."
::= 2904
snTrapMspsLinkCheckCriticalLinkDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Link Check indicates critical link state on port."
::= 2905
snTrapMspsLinkCheckCriticalLinkReset TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"By Link Check indicated critical link state reset on port."
::= 2906
snTrapMspsLinkCheckUnapprovedConfigDetected TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Unapproved Link Check configuration. Disable Link Check on this port."
::= 2907
snTrapMspsLinkCheckUnapprovedConfigResolved TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Unapproved Link Check configuration resolved on this port."
::= 2908
snMspsTrapMrpInterconMgrOpenState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"MRP Interconnection state change to open."
::= 3001
snMspsTrapMrpInterconMgrClosedState TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"MRP Interconnection state change to closed."
::= 3002
snMspsTrapPoeStateChange TRAP-TYPE
ENTERPRISE snMsps
DESCRIPTION
"Poe state change notification."
::= 3051
-- --------------------------------------------------------------
-- SIMATIC NET MSPS SPECIFIC SFP MIB
-- --------------------------------------------------------------
-- --------------------------------------------------------------
-- SfpTable Sub-Group
-- --------------------------------------------------------------
snMspsSfpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSfpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects in the form of private
extensions of interface objects."
::= { snMspsSfp 10 }
snMspsSfpEntry OBJECT-TYPE
SYNTAX SnMspsSfpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects at the
subnetwork layer and below for a particular
interface."
INDEX { snMspsSfpIndex }
::= { snMspsSfpTable 1 }
SnMspsSfpEntry ::= SEQUENCE {
snMspsSfpIndex INTEGER,
snMspsSfpStatus TruthValue,
snMspsSfpName DisplayString,
snMspsSfpModel DisplayString,
snMspsSfpRevision DisplayString,
snMspsSfpSerial DisplayString,
snMspsSfpNominalBitrate INTEGER,
snMspsSfpMaxLinkLength50 INTEGER,
snMspsSfpMaxLinkLength62 INTEGER,
snMspsSfpTemperature INTEGER,
snMspsSfpTemperatureMin INTEGER,
snMspsSfpTemperatureMax INTEGER,
snMspsSfpVoltage INTEGER,
snMspsSfpVoltageMin INTEGER,
snMspsSfpVoltageMax INTEGER,
snMspsSfpCurrent INTEGER,
snMspsSfpCurrentMin INTEGER,
snMspsSfpCurrentMax INTEGER,
snMspsSfpRxPower INTEGER,
snMspsSfpRxPowerMin INTEGER,
snMspsSfpRxPowerMax INTEGER,
snMspsSfpTxPower INTEGER,
snMspsSfpTxPowerMin INTEGER,
snMspsSfpTxPowerMax INTEGER,
snMspsSfpRxPowerdBm INTEGER,
snMspsSfpRxPowerMindBm INTEGER,
snMspsSfpRxPowerMaxdBm INTEGER,
snMspsSfpTxPowerdBm INTEGER,
snMspsSfpTxPowerMindBm INTEGER,
snMspsSfpTxPowerMaxdBm INTEGER
}
snMspsSfpIndex OBJECT-TYPE
SYNTAX INTEGER (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique number for each interface. The number is in the range
1 to 52. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsSfpEntry 1 }
snMspsSfpStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether a SFP device in currently plugged in on this interface"
::= { snMspsSfpEntry 2 }
snMspsSfpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the SFP device"
::= { snMspsSfpEntry 3 }
snMspsSfpModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The model of the SFP device"
::= { snMspsSfpEntry 4 }
snMspsSfpRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The revision number of the SFP device"
::= { snMspsSfpEntry 5 }
snMspsSfpSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The serial number of the SFP device"
::= { snMspsSfpEntry 6 }
snMspsSfpNominalBitrate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The nominal bitrate [MBit/s] of the SFP device"
::= { snMspsSfpEntry 7 }
snMspsSfpMaxLinkLength50 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum link length(50/125um) of the SFP device"
::= { snMspsSfpEntry 8 }
snMspsSfpMaxLinkLength62 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum link length(62/125um) of the SFP device"
::= { snMspsSfpEntry 9 }
snMspsSfpTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The temperature of the SFP device"
::= { snMspsSfpEntry 10 }
snMspsSfpTemperatureMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported temperature of the SFP device"
::= { snMspsSfpEntry 11 }
snMspsSfpTemperatureMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported temperature of the SFP device"
::= { snMspsSfpEntry 12 }
snMspsSfpVoltage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The voltage of the SFP device"
::= { snMspsSfpEntry 13 }
snMspsSfpVoltageMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported voltage of the SFP device"
::= { snMspsSfpEntry 14 }
snMspsSfpVoltageMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported voltage of the SFP device"
::= { snMspsSfpEntry 15 }
snMspsSfpCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bias current of the SFP device"
::= { snMspsSfpEntry 16 }
snMspsSfpCurrentMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported bias current of the SFP device"
::= { snMspsSfpEntry 17 }
snMspsSfpCurrentMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported bias current of the SFP device"
::= { snMspsSfpEntry 18 }
snMspsSfpRxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The receive power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 19 }
snMspsSfpRxPowerMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported receive power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 20 }
snMspsSfpRxPowerMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported receive power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 21 }
snMspsSfpTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmit power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 22 }
snMspsSfpTxPowerMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported transmit power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 23 }
snMspsSfpTxPowerMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported transmit power of the SFP device in units of 0.1 uW"
::= { snMspsSfpEntry 24 }
snMspsSfpRxPowerdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 32 }
snMspsSfpRxPowerMindBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 33 }
snMspsSfpRxPowerMaxdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 34 }
snMspsSfpTxPowerdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 35 }
snMspsSfpTxPowerMindBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 36 }
snMspsSfpTxPowerMaxdBm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW"
::= { snMspsSfpEntry 37 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Global Objects
-- ----------------------------------------------------------------
snMspsLoadSaveRestartRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Represents current state of the device according
to file transfer activities, which are done for files
registered by Load & Save component. If the current
state is 'true', the restart of the device is required."
DEFVAL { false }
::= { snMspsLoadSave 1 }
-- ----------------------------------------------------------------
-- MSPS Load & Save Group Objects
-- ----------------------------------------------------------------
snMspsLoadSavePasswords OBJECT IDENTIFIER ::= { snMspsLoadSave 5 }
snMspsLoadSaveTftp OBJECT IDENTIFIER ::= { snMspsLoadSave 10 }
snMspsLoadSaveSftp OBJECT IDENTIFIER ::= { snMspsLoadSave 11 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Component Objects (Passwords)
-- ----------------------------------------------------------------
snMspsLoadSaveFilePasswordTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveFilePasswordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains files, which are currently
registered by Load & Save component."
::= { snMspsLoadSavePasswords 10 }
snMspsLoadSaveFilePasswordEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveFilePasswordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveFilePasswordTable representing
password settings of configuration files, which are currently
registered by Load & Save component."
INDEX { snMspsLoadSaveFileIndex }
::= { snMspsLoadSaveFilePasswordTable 1 }
SnMspsLoadSaveFilePasswordEntry ::=
SEQUENCE {
snMspsLoadSaveFileIndex
OCTET STRING,
snMspsLoadSaveFileType
DisplayString,
snMspsLoadSaveFileEnablePassword
TruthValue,
snMspsLoadSaveFilePassword
OCTET STRING,
snMspsLoadSaveFilePasswordStatus
INTEGER
}
snMspsLoadSaveFileIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique string representing file type ID."
::= { snMspsLoadSaveFilePasswordEntry 1 }
snMspsLoadSaveFileType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file type ID of registered file.
This string is identical to snMspsLoadSaveFileIndex."
::= { snMspsLoadSaveFilePasswordEntry 2 }
snMspsLoadSaveFileEnablePassword OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 'true' if this file type needs a configured password."
DEFVAL { false }
::= { snMspsLoadSaveFilePasswordEntry 5 }
snMspsLoadSaveFilePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encrypted password value, which is used when accessing
registered file. This value has to be entered by user."
::= { snMspsLoadSaveFilePasswordEntry 10 }
snMspsLoadSaveFilePasswordStatus OBJECT-TYPE
SYNTAX INTEGER {
not-required(0),
valid(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current validation status of entered password.
0 - The password value is not considered by the file type
1 - The password value stored in snMspsLoadSaveFilePassword
is valid for the corresponding file type.
2 - The password value stored in snMspsLoadSaveFilePassword
is invalid for the corresponding file type."
::= { snMspsLoadSaveFilePasswordEntry 15 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Component Objects (TFTP)
-- ----------------------------------------------------------------
snMspsLoadSaveTftpServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "The IP address of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 1 }
snMspsLoadSaveTftpServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 2 }
snMspsLoadSaveTftpServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Inet address of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 5 }
snMspsLoadSaveTftpServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Inet address type of TFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveTftp 6 }
snMspsLoadSaveTftpFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveTftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configuration files, which are currently
registered by Load & Save component."
::= { snMspsLoadSaveTftp 10 }
snMspsLoadSaveTftpFileEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveTftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveTftpFileTable representing
settings of configuration files, which are currently
registered by Load & Save component."
INDEX { snMspsLoadSaveTftpFileIndex }
::= { snMspsLoadSaveTftpFileTable 1 }
SnMspsLoadSaveTftpFileEntry ::=
SEQUENCE {
snMspsLoadSaveTftpFileIndex
OCTET STRING,
snMspsLoadSaveTftpFileType
DisplayString,
snMspsLoadSaveTftpFileName
DisplayString,
snMspsLoadSaveTftpFilePresent
INTEGER,
snMspsLoadSaveTftpFileLoadSupported
TruthValue,
snMspsLoadSaveTftpFileSaveSupported
TruthValue,
snMspsLoadSaveTftpFileDeleteSupported
TruthValue
}
snMspsLoadSaveTftpFileIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique string representing file type ID."
::= { snMspsLoadSaveTftpFileEntry 1 }
snMspsLoadSaveTftpFileType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file type ID of registered file.
This string is identical to snMspsLoadSaveTftpFileIndex."
::= { snMspsLoadSaveTftpFileEntry 2 }
snMspsLoadSaveTftpFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The file name of registered file. The file name can also contain
the relative path starting from root folder of TFTP server."
::= { snMspsLoadSaveTftpFileEntry 3 }
snMspsLoadSaveTftpFilePresent OBJECT-TYPE
SYNTAX INTEGER {
not-present(0),
presentSave(1),
presentDelete(2),
presentSaveDelete(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Availability of the registered file on the device.
0 - the registered file is currently not present on device
1 - the registered file can be downloaded from device
2 - the registered file can be deleted on the device
3 - the registered file can be downloaded from device and
deleted on device
"
::= { snMspsLoadSaveTftpFileEntry 4 }
snMspsLoadSaveTftpFileLoadSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Load functionality
is supported for this file type."
::= { snMspsLoadSaveTftpFileEntry 10 }
snMspsLoadSaveTftpFileSaveSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Save functionality
is supported for this file type."
::= { snMspsLoadSaveTftpFileEntry 11 }
snMspsLoadSaveTftpFileDeleteSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Delete functionality
is supported for this file type."
::= { snMspsLoadSaveTftpFileEntry 12 }
-- ----------------------------------------
-- TFTP File triggers table
-- ----------------------------------------
snMspsLoadSaveTftpFileTransferTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveTftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This conceptual table is an extension of
snMspsLoadSaveTftpFileTable and contains file triggers for initiate
file operations with files registered by Load & Save component."
::= { snMspsLoadSaveTftp 11 }
snMspsLoadSaveTftpFileTransferEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveTftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveTftpFileTransferTable
representing file triggers of configuration files,
which are currently registered by Load & Save component."
AUGMENTS { snMspsLoadSaveTftpFileEntry }
::= { snMspsLoadSaveTftpFileTransferTable 1 }
SnMspsLoadSaveTftpFileTransferEntry ::=
SEQUENCE {
snMspsLoadSaveTftpFileLoad
INTEGER,
snMspsLoadSaveTftpFileSave
INTEGER,
snMspsLoadSaveTftpFileDelete
INTEGER
}
snMspsLoadSaveTftpFileLoad OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
loadError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from TFTP server to device,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveTftpFileLoadSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Load transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from TFTP server
to device. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from TFTP server is in progress.
4 - Last transfer of registered file from TFTP server
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from TFTP server
was successfull. Device restart is reqired.
6 - Last transfer of registered file from TFTP server
was not successfull."
::= { snMspsLoadSaveTftpFileTransferEntry 1 }
snMspsLoadSaveTftpFileSave OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
saveError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from device to TFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveTftpFileSaveSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Save transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from device to
TFTP server. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from device is in progress.
4 - Last transfer of registered file from device
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from device
was successfull. Device restart is reqired.
6 - Last transfer of registered file from device
was not successfull."
::= { snMspsLoadSaveTftpFileTransferEntry 2 }
snMspsLoadSaveTftpFileDelete OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
deleteError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates deletion
of registered file on TFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveTftpFileDeleteSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Delete actions have been done for this file type
since device start.
2 - Activate deletion of registered file on TFTP server
If this file type does not support this functionality,
the 'bad value' error will be returned.
3 - Deletion of registered file on TFTP server is in progress.
4 - Last deletion of registered file on TFTP server
was successfull. Restart of the device is not reqired.
5 - Last deletion of registered file on TFTP server
was successfull. Restart of the device is reqired.
6 - Last deletion of registered file on TFTP server
was not successfull."
::= { snMspsLoadSaveTftpFileTransferEntry 3 }
-- ----------------------------------------------------------------
-- MSPS Load& Save Component Objects (SFTP)
-- ----------------------------------------------------------------
snMspsLoadSaveSftpServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of SFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveSftp 1 }
snMspsLoadSaveSftpServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Inet address type of SFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveSftp 2 }
snMspsLoadSaveSftpServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of SFTP server, which stores
the files registered by Load&Save component."
::= { snMspsLoadSaveSftp 3 }
snMspsLoadSaveSftpServerUser OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user ID, which has to be allowed
for login to SFTP server."
::= { snMspsLoadSaveSftp 6 }
snMspsLoadSaveSftpServerPassword OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user password, which has to be valid
for login with user ID defined in
snMspsLoadSaveSftpServerUser to SFTP server."
::= { snMspsLoadSaveSftp 7 }
snMspsLoadSaveSftpFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveSftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configuration files, which are currently
registered by Load & Save component."
::= { snMspsLoadSaveSftp 10 }
snMspsLoadSaveSftpFileEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveSftpFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveSftpFileTable representing
settings of configuration files, which are currently
registered by Load & Save component."
INDEX { snMspsLoadSaveSftpFileIndex }
::= { snMspsLoadSaveSftpFileTable 1 }
SnMspsLoadSaveSftpFileEntry ::=
SEQUENCE {
snMspsLoadSaveSftpFileIndex
OCTET STRING,
snMspsLoadSaveSftpFileType
DisplayString,
snMspsLoadSaveSftpFileName
DisplayString,
snMspsLoadSaveSftpFilePresent
INTEGER,
snMspsLoadSaveSftpFileLoadSupported
TruthValue,
snMspsLoadSaveSftpFileSaveSupported
TruthValue,
snMspsLoadSaveSftpFileDeleteSupported
TruthValue
}
snMspsLoadSaveSftpFileIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique string representing file type ID."
::= { snMspsLoadSaveSftpFileEntry 1 }
snMspsLoadSaveSftpFileType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file type ID of registered file.
This string is identical to snMspsLoadSaveSftpFileIndex."
::= { snMspsLoadSaveSftpFileEntry 2 }
snMspsLoadSaveSftpFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The file name of registered file. The file name can also contain
the relative path starting from root folder of SFTP server."
::= { snMspsLoadSaveSftpFileEntry 3 }
snMspsLoadSaveSftpFilePresent OBJECT-TYPE
SYNTAX INTEGER {
not-present(0),
presentSave(1),
presentDelete(2),
presentSaveDelete(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Availability of the registered file on the device.
0 - the registered file is currently not present on device
1 - the registered file can be downloaded from device
2 - the registered file can be deleted on the device
3 - the registered file can be downloaded from device and
deleted on device
"
::= { snMspsLoadSaveSftpFileEntry 4 }
snMspsLoadSaveSftpFileLoadSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Load functionality
is supported for this file type."
::= { snMspsLoadSaveSftpFileEntry 10 }
snMspsLoadSaveSftpFileSaveSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Save functionality
is supported for this file type."
::= { snMspsLoadSaveSftpFileEntry 11 }
snMspsLoadSaveSftpFileDeleteSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents whether the Delete functionality
is supported for this file type."
::= { snMspsLoadSaveSftpFileEntry 12 }
-- ----------------------------------------
-- SFTP File triggers table
-- ----------------------------------------
snMspsLoadSaveSftpFileTransferTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoadSaveSftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This conceptual table is an extension of
snMspsLoadSaveSftpFileTable and contains file triggers for initiate
file operations with files registered by Load & Save component."
::= { snMspsLoadSaveSftp 11 }
snMspsLoadSaveSftpFileTransferEntry OBJECT-TYPE
SYNTAX SnMspsLoadSaveSftpFileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the snMspsLoadSaveSftpFileTransferTable
representing file triggers of configuration files,
which are currently registered by Load & Save component."
AUGMENTS { snMspsLoadSaveSftpFileEntry }
::= { snMspsLoadSaveSftpFileTransferTable 1 }
SnMspsLoadSaveSftpFileTransferEntry ::=
SEQUENCE {
snMspsLoadSaveSftpFileLoad
INTEGER,
snMspsLoadSaveSftpFileSave
INTEGER,
snMspsLoadSaveSftpFileDelete
INTEGER
}
snMspsLoadSaveSftpFileLoad OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
loadError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from SFTP server to device,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveSftpFileLoadSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Load transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from SFTP server
to device. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from SFTP server is in progress.
4 - Last transfer of registered file from SFTP server
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from SFTP server
was successfull. Device restart is reqired.
6 - Last transfer of registered file from SFTP server
was not successfull."
::= { snMspsLoadSaveSftpFileTransferEntry 1 }
snMspsLoadSaveSftpFileSave OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
saveError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates transfer
of registered file from device to SFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveSftpFileSaveSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Save transfers have been done for this file type
since last start of the device.
2 - Activate transfer of registered file from device to
SFTP server. If this file type does not support this
functionality, the 'bad value' error will be returned.
3 - Last transfer of registered file from device is in progress.
4 - Last transfer of registered file from device
was successfull. Device restart is not reqired.
5 - Last transfer of registered file from device
was successfull. Device restart is reqired.
6 - Last transfer of registered file from device
was not successfull."
::= { snMspsLoadSaveSftpFileTransferEntry 2 }
snMspsLoadSaveSftpFileDelete OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
activate(2),
in-progress(3),
successNoRestart(4),
successRestartRequired(5),
deleteError(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write access using activate(2) initiates deletion
of registered file on SFTP server,
if this functionality is supported for this file type.
The support of functionality is represented in
snMspsLoadSaveSftpFileDeleteSupported.
Write access using other values will cause 'bad value'
error. Read access will return following values:
1 - No Delete actions have been done for this file type
since device start.
2 - Activate deletion of registered file on SFTP server
If this file type does not support this functionality,
the 'bad value' error will be returned.
3 - Deletion of registered file on SFTP server is in progress.
4 - Last deletion of registered file on SFTP server
was successfull. Restart of the device is not reqired.
5 - Last deletion of registered file on SFTP server
was successfull. Restart of the device is reqired.
6 - Last deletion of registered file on SFTP server
was not successfull."
::= { snMspsLoadSaveSftpFileTransferEntry 3 }
snMspsHttpRedirectionStatus OBJECT-TYPE
SYNTAX INTEGER { disabled (1), enabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the HTTP redirection"
DEFVAL { 1 }
::= { snMspsHttp 1 }
snMspsHttpToHttpsRedirectionStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the HTTP to HTTPS redirection.
If device do not support this feature, the value of this MIB object
can not be set to true."
DEFVAL { false }
::= { snMspsHttp 2 }
-- snMspsHttp 3 reserved
snMspsHttpRedirectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsHttpRedirectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the Redirection related objects"
::= { snMspsHttp 4 }
snMspsHttpRedirectionEntry OBJECT-TYPE
SYNTAX SnMspsHttpRedirectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsHttpRedirectionTable."
INDEX { snMspsHttpRedirectionURL }
::= { snMspsHttpRedirectionTable 1 }
SnMspsHttpRedirectionEntry ::= SEQUENCE {
snMspsHttpRedirectionURL DisplayString,
snMspsHttpRedirectedSrvAddrType InetAddressType,
snMspsHttpRedirectedSrvIP InetAddress,
snMspsHttpRedirectedSrvDomainName DisplayString,
snMspsHttpRedirectionEntryStatus RowStatus
}
snMspsHttpRedirectionURL OBJECT-TYPE
SYNTAX DisplayString (SIZE (100))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The URL which has to be redirected"
::= { snMspsHttpRedirectionEntry 1 }
snMspsHttpRedirectedSrvAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address type of HTTP server to which URL has to be
redirected"
::= { snMspsHttpRedirectionEntry 2 }
snMspsHttpRedirectedSrvIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IP address of the HTTP Server to which redirect has to be done
interface belongs to"
::= { snMspsHttpRedirectionEntry 3 }
snMspsHttpRedirectedSrvDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain name of the HTTP server to which the URL has to be
has to redirected"
::= { snMspsHttpRedirectionEntry 4 }
snMspsHttpRedirectionEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of HTTP redirection table entry"
::= { snMspsHttpRedirectionEntry 5 }
-- snMspsHttp 6 reserved
snMspsWBMTimeOut OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time out for the Web-Based-Management in seconds. Range 60s to 3600s.
If value is 0, timeout is disabled."
DEFVAL {900}
::= { snMspsHttp 7 }
-- snMspsHttp 8-9 reserved
snMspsHttpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be used by the hosts/PC to configure the device using the Web Interface
The HTTP server must be disabled before this configuration is done"
DEFVAL { 80 }
::= { snMspsHttp 10 }
snMspsHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling HTTP in the system."
::= { snMspsHttp 11 }
-- snMspsHttp 12-14 reserved
snMspsHttpSslSecureHttpMinTlsVersion OBJECT-TYPE
SYNTAX INTEGER {
tlsv10 (769),
tlsv11 (770),
tlsv12(771)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object holds the configuration of the minimum Tls Version for secure HTTP in the system."
DEFVAL { tlsv11 }
::= { snMspsHttp 15}
snMspsHttpSslSecureHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling secure HTTP in the system."
DEFVAL { disable }
::= { snMspsHttp 16 }
snMspsHttpSslPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the SSL port."
DEFVAL { 443 }
::= { snMspsHttp 17 }
snMspsHttpSshStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling ssh in the system."
DEFVAL { true }
::= { snMspsHttp 18}
-- ----------------------------------------------------------------
-- SN-MSPS-RR-MIB Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-RR-MIB
-- ----------------------------------------------------------------
snMspsRingRedundancyMode OBJECT-TYPE
SYNTAX INTEGER {
ringRedundancyOff(1),
ringRedundancyHrpOn(2),
ringRedundancyMrpOn(3),
ringRedundancyArd(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Redundancy Mode:
ringRedundancyOff(1) - no redundancy
ringRedundancyHrpOn(2) - high speed redundancy protocol
ringRedundancyMrpOn(3) - media redundancy protocol
ringRedundancyArd(4) - automatic redundancy detection."
::= { snMspsRingRedundancy 1 }
snMspsHrpRmMode OBJECT-TYPE
SYNTAX INTEGER {
rmOff(1),
rmOn(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HRP RM mode."
::= { snMspsRingRedundancy 2 }
snMspsRmState OBJECT-TYPE
SYNTAX INTEGER {
rmPassive(1),
rmActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RM State."
::= { snMspsRingRedundancy 3 }
snMspsRmStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of changes to RM active state."
::= { snMspsRingRedundancy 4 }
snMspsStaticPort OBJECT-TYPE
SYNTAX INTEGER (1..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Portnumber of static port (HRP) or RingPort 2 (MRP)."
::= { snMspsRingRedundancy 5 }
snMspsIsolatedPort OBJECT-TYPE
SYNTAX INTEGER (1..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Portnumber of isolated port (HRP) or RingPort 1 (MRP)."
::= { snMspsRingRedundancy 6 }
snMspsTestMaxDelay OBJECT-TYPE
SYNTAX INTEGER (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Measured maximum delay of RM test telegrams."
::= { snMspsRingRedundancy 7 }
snMspsRmResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all counters of Redundancy protocol software. At the moment only supported for HRP."
::= { snMspsRingRedundancy 8 }
snMspsMrpRmMode OBJECT-TYPE
SYNTAX INTEGER {
rmOff(1),
rmOn(2),
rmNormOn(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MRP RM mode.
rmOff(1) - ring client
rmOn(2) - ring manager (MRP AUTO manager if ringRedundancyMrpOn)
rmNormOn(3) - ring norm manager (MRP NORM manager if ringRedundancyMrpOn)"
::= { snMspsRingRedundancy 9 }
snMspsRingRedundancyOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
hrpClient(2),
hrpManager(3),
mrpClient(4),
mrpManager(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ring Redundancy Oper State:
disabled(1) - no redundancy
hrpClient(2) - high speed redundancy protocol client
hrpManager(3) - high speed redundancy protocol manager
mrpClient(4) - media redundancy protocol client
mrpManager(5) - media redundancy protocol manager."
::= { snMspsRingRedundancy 10 }
snMspsHrpRedundancyLostFaultLED OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables the Fault LED when Ring Redundancy (only HRP) is lost (Redundancy Manager or Standby)."
DEFVAL {2}
::= { snMspsRingRedundancy 11 }
snMspsMrpDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..240))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Media redundancy protocol domain name."
::= { snMspsRingRedundancy 16 }
snMspsTrapRmActiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Redundancy manager entered active state."
::= { snMspsTrapPrefix 1451 }
snMspsTrapRmPassiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Redundancy manager entered passive state."
::= { snMspsTrapPrefix 1452 }
snMspsStandbyMode OBJECT-TYPE
SYNTAX INTEGER {
standbyOn(1),
standbyOff(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Standby connection mode."
::= { snMspsRingRedundancyStandby 1 }
snMspsStandbyConnectionName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The standby connection name (Max 32 Symbol)."
::= { snMspsRingRedundancyStandby 3 }
snMspsStandbyState OBJECT-TYPE
SYNTAX INTEGER {
standbyMasterPassive(1),
standbySlavePassive(3),
standbyMasterActive(5),
standbySlaveActive(7),
standbyMasterPassive-lost(17),
standbySlavePassive-lost(19),
standbyMasterActive-lost(21),
standbySlaveActive-lost(23),
standbyWaitingForPartner(257),
standbyDisabled(300)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Standby connection state.
Bit 0 is always 1, bit 1 is Master/Slave,
bit 2 is Active/Passive and bit 8 is Partner not found or not.
standbyMasterPassive(1) - Master in passive state
standbySlavePassive(3) - Slave in passive state
standbyMasterActive(5) - Master in active state
standbySlaveActive(7) - Slave in passive state
standbyMasterPassive-lost(17) - Master in passive state but partner is lost
standbySlavePassive-lost(19) - Slave in passive state but partner is lost
standbyMasterActive-lost(21) - Master in active state but partner is lost
standbySlaveActive-lost(23) - Slave in active state but partner is lost
standbyWaitingForPartner(257) - Waiting for partner, partner was not yet found
standbyDisabled(300) - Standby connection is disabled"
::= { snMspsRingRedundancyStandby 4 }
snMspsStandbyStateChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of changes to Standby connection active state."
::= { snMspsRingRedundancyStandby 5 }
snMspsStandbyResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all counters of Standby protocol software."
::= { snMspsRingRedundancyStandby 6 }
snMspsStandbyForceToMaster OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Force this device to Standby master."
::= { snMspsRingRedundancyStandby 7 }
snMspsStandbyStartDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time in [ms] that a standby master/slave will wait
before to enable its standby ports even if no standby
partner has been contacted yet.
If set to zero (default) master/slave do not enable
any standby port until being connected with the
partner standby slave/master"
::= { snMspsRingRedundancyStandby 12 }
snMspsStandbyBackoff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "controls Standby device backoff mechanisms."
::= { snMspsRingRedundancyStandby 14 }
snMspsTrapStandbyActiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Standby manager entered active state."
::= { snMspsTrapPrefix 1501 }
snMspsTrapStandbyPassiveState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Standby manager entered passive state."
::= { snMspsTrapPrefix 1502 }
-- ----------------------------------------------------------------
-- MSPS REDUNDANCY EXT Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-RR-EXT-MIB
-- ----------------------------------------------------------------
snMspsPassiveListeningEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable Passive Listening Functionality.
On enabled the device reacts on receiving a TCN (Topology Change Notifications) even (and only) if (R)STP is disabled."
DEFVAL {disabled}
::= { snMspsRedundancyExt 1 }
snMspsPassiveListeningBpduVlanFwd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable / Disable Forwarding of BPDU in VLAN member ports when Passive Listening Functionality is enabled.
On enabled the device forwards the BPDU only on the VLAN member ports.
On disabled the device forwards on all the available ports in the system. "
DEFVAL {enabled}
::= { snMspsRedundancyExt 2 }
snMspsRmObserverMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(2),
restart(3),
protect(4),
not-supported(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "RM Observer Mode."
::= { snMspsRingRedundancyObserver 1 }
snMspsRmObserverState OBJECT-TYPE
SYNTAX INTEGER {
rmObserverPassive(1),
rmObserverActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RM Observer State."
::= { snMspsRingRedundancyObserver 2 }
snMspsLinkCheckPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLinkCheckPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects."
::= { snMspsLinkCheck 10 }
snMspsLinkCheckPortEntry OBJECT-TYPE
SYNTAX SnMspsLinkCheckPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Link Check per-port entry."
INDEX { snMspsLinkCheckPortIndex }
::= { snMspsLinkCheckPortTable 1 }
SnMspsLinkCheckPortEntry ::= SEQUENCE {
snMspsLinkCheckPortIndex InterfaceIndex,
snMspsLinkCheckPortAdminState INTEGER,
snMspsLinkCheckPortOperState INTEGER,
snMspsLinkCheckPortMode INTEGER,
snMspsLinkCheckPortAdvState INTEGER,
snMspsLinkCheckPortAdvReset INTEGER,
snMspsLinkCheckPortFramesIn Counter32,
snMspsLinkCheckPortFramesOut Counter32
}
snMspsLinkCheckPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Port number of Link Check port."
::= { snMspsLinkCheckPortEntry 1 }
snMspsLinkCheckPortAdminState OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
force-on(2),
force-off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Link Check state to be used"
DEFVAL {3}
::= { snMspsLinkCheckPortEntry 2 }
snMspsLinkCheckPortOperState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
not-active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link Check operating state"
DEFVAL {2}
::= { snMspsLinkCheckPortEntry 3 }
snMspsLinkCheckPortMode OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
advanced(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In advanced mode the port will be disabled after Link Check breakdown"
DEFVAL {1}
::= { snMspsLinkCheckPortEntry 6 }
snMspsLinkCheckPortAdvState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2),
running(3),
fault(4),
critical(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port state in advanced mode"
::= { snMspsLinkCheckPortEntry 9 }
snMspsLinkCheckPortAdvReset OBJECT-TYPE
SYNTAX INTEGER {
no-action(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "resetting a port that has been disabled after Link Check advanced mode breakdown detection"
DEFVAL {1}
::= { snMspsLinkCheckPortEntry 12 }
snMspsLinkCheckPortFramesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of received Link Check frames"
::= { snMspsLinkCheckPortEntry 15 }
snMspsLinkCheckPortFramesOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of sent Link Check frames"
::= { snMspsLinkCheckPortEntry 18 }
snMspsLinkCheckFrameLossStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLinkCheckFrameLossStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port, per-instance objects."
::= { snMspsLinkCheck 7 }
snMspsLinkCheckFrameLossStatsEntry OBJECT-TYPE
SYNTAX SnMspsLinkCheckFrameLossStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Link Check frame loss statistic per-port, per-instance entry."
INDEX { snMspsLinkCheckPortIndex,
snMspsFrameLossStatsInstance }
::= { snMspsLinkCheckFrameLossStatsTable 1 }
SnMspsLinkCheckFrameLossStatsEntry ::= SEQUENCE {
snMspsFrameLossStatsInstance INTEGER,
snMspsFrameLossStatsRating INTEGER,
snMspsFrameLossStatsInterval INTEGER,
snMspsFrameLossStatsThreshold INTEGER,
snMspsFrameLossStatsCurrentRate INTEGER
}
snMspsFrameLossStatsInstance OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Link Check frame loss statistics instance of port."
::= { snMspsLinkCheckFrameLossStatsEntry 2 }
snMspsFrameLossStatsRating OBJECT-TYPE
SYNTAX INTEGER {
none(1),
critical(2),
broken(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Rating of link state if threshold is exceeded."
::= { snMspsLinkCheckFrameLossStatsEntry 5 }
snMspsFrameLossStatsInterval OBJECT-TYPE
SYNTAX INTEGER (100..1000000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Interval [ms] of frame loss calculation."
::= { snMspsLinkCheckFrameLossStatsEntry 8 }
snMspsFrameLossStatsThreshold OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Frame loss rate threshold [per mill]."
::= { snMspsLinkCheckFrameLossStatsEntry 11 }
snMspsFrameLossStatsCurrentRate OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current frame loss rate [per mill]."
::= { snMspsLinkCheckFrameLossStatsEntry 14 }
snMspsLinkCheckPacketErrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLinkCheckPacketErrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port, per-type objects."
::= { snMspsLinkCheck 9 }
snMspsLinkCheckPacketErrStatsEntry OBJECT-TYPE
SYNTAX SnMspsLinkCheckPacketErrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Packet errors statistic per-type entry"
INDEX { snMspsLinkCheckPortIndex,
snMspsPacketErrStatsType }
::= { snMspsLinkCheckPacketErrStatsTable 1 }
SnMspsLinkCheckPacketErrStatsEntry ::= SEQUENCE {
snMspsPacketErrStatsType INTEGER,
snMspsPacketErrStatsRating INTEGER,
snMspsPacketErrStatsThreshold Counter32,
snMspsPacketErrStatsIncrease Counter32
}
snMspsPacketErrStatsType OBJECT-TYPE
SYNTAX INTEGER {
crc(1),
undersize(2),
oversize(3),
fragment(4),
jabber(5),
collision(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Packet error type."
::= { snMspsLinkCheckPacketErrStatsEntry 3 }
snMspsPacketErrStatsRating OBJECT-TYPE
SYNTAX INTEGER {
none(1),
critical(2),
broken(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Rating of link state if threshold is exceeded."
::= { snMspsLinkCheckPacketErrStatsEntry 6 }
snMspsPacketErrStatsThreshold OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet error increase threshold."
::= { snMspsLinkCheckPacketErrStatsEntry 9 }
snMspsPacketErrStatsIncrease OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet error increase since Link Check state is 'running'."
::= { snMspsLinkCheckPacketErrStatsEntry 12 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snTrapMspsLinkCheckBrokenLinkDetected NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check disabled port because of broken link."
::= { snMspsTrapPrefix 2901 }
snTrapMspsLinkCheckPortEnabled NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "By Link Check disabled port is enabled again."
::= { snMspsTrapPrefix 2902 }
snTrapMspsLinkCheckMultiplePartners NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check detected multiple partners on port."
::= { snMspsTrapPrefix 2903 }
snTrapMspsLinkCheckMultiplePartnersReset NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check partner detection reset on port."
::= { snMspsTrapPrefix 2904 }
snTrapMspsLinkCheckCriticalLinkDetected NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Link Check indicates critical link state on port."
::= { snMspsTrapPrefix 2905 }
snTrapMspsLinkCheckCriticalLinkReset NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "By Link Check indicated critical link state reset on port."
::= { snMspsTrapPrefix 2906 }
snTrapMspsLinkCheckUnapprovedConfigDetected NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Unapproved Link Check configuration. Disable Link Check on this port."
::= { snMspsTrapPrefix 2907 }
snTrapMspsLinkCheckUnapprovedConfigResolved NOTIFICATION-TYPE
OBJECTS { snMspsLinkCheckPortIndex }
STATUS current
DESCRIPTION "Unapproved Link Check configuration resolved on this port."
::= { snMspsTrapPrefix 2908 }
-- ***********************************************************************
-- Objects of the Media redundancy Interconnection
-- ***********************************************************************
snMspsMrpInterconStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MRP Interconnection protocol status.
If set to disabled(2), all configured entries of the MRP Interconnection
table are set out of sevice, despite the mode and the admin role.
If set to enabled(1), all configured entries are put into operation,
depending on the mode and the admin role.
"
::= { snMspsRingRedundancyMrpIntercon 1 }
snMspsMrpInterconResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all counters of MRP Interconnection protocol software.
This object is not persistent.
"
::= { snMspsRingRedundancyMrpIntercon 2 }
snMspsMrpInterconTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMrpInterconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every entry in this table contains information about
a Media redundancy Interconnection domain.
"
::= { snMspsRingRedundancyMrpIntercon 10 }
snMspsMrpInterconEntry OBJECT-TYPE
SYNTAX SnMspsMrpInterconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the snMspsMrpInterconTable.
"
INDEX { snMspsMrpInterconIndex }
::= { snMspsMrpInterconTable 1 }
SnMspsMrpInterconEntry::= SEQUENCE {
snMspsMrpInterconIndex Unsigned32,
snMspsMrpInterconDomainID Unsigned32,
snMspsMrpInterconDomainName DisplayString,
snMspsMrpInterconPort Integer32,
snMspsMrpInterconPortState INTEGER,
snMspsMrpInterconMode INTEGER,
snMspsMrpInterconAdminRole INTEGER,
snMspsMrpInterconOperRole INTEGER,
snMspsMrpInterconState INTEGER,
snMspsMrpInterconOpenCount Counter32,
snMspsMrpInterconLastOpenChange TimeTicks,
snMspsMrpInterconPeerMAC OCTET STRING,
snMspsMrpInterconAdminMICPosition INTEGER,
snMspsMrpInterconOperMICPosition INTEGER,
snMspsMrpInterconLinkCheckProfile INTEGER,
snMspsMrpInterconStartDelay INTEGER,
snMspsMrpInterconRowStatus RowStatus
}
snMspsMrpInterconIndex OBJECT-TYPE
SYNTAX Unsigned32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the entry
"
::= { snMspsMrpInterconEntry 1 }
snMspsMrpInterconDomainID OBJECT-TYPE
SYNTAX Unsigned32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An identifier of the Media redundancy Interconnection domain
which represents an Interconnection topology.
A value of 0 (invalid) indicates that no ID is given yet.
"
::= { snMspsMrpInterconEntry 2 }
snMspsMrpInterconDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..240))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A logical name for the Media redundancy Interconnection domain to
ease the management of Media redundancy Interconnection domains.
"
::= { snMspsMrpInterconEntry 3 }
snMspsMrpInterconPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ifIndex of the layer 2 interface which is used
as interconnection port.
A value of 0 (invalid) indicates that no interface is selected yet.
"
::= { snMspsMrpInterconEntry 4 }
snMspsMrpInterconPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocked(2),
forwarding(3),
notConnected(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational state of the Interconnection port.
disabled(1) indicates that all frames are dropped.
blocked(2) indicates that all frames are dropped except
- MRP Interconnection topology change frames,
- MRP Interconnection test frames,
- MRP Interconnection link change frames,
- MRP Interconnection link status poll frames,
- frames from other protocols that also define to pass
blocked(2) ports.
forwarding(3) indicates that all frames are passed through
according to the forwarding behavior of IEEE 802.1D.
notConnected(4) indicates that the port has no link.
"
::= { snMspsMrpInterconEntry 5 }
-- { snMspsMrpInterconEntry 6 } reserved for future use as VLAN ID
snMspsMrpInterconMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
undefined(1),
lcMode(2),
rcMode(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control the MRP Interconnection mode.
The value disable(0) is used to set the entry persistent
out of service (the corresponding row status has to be set)
without losing the primary configuration (mainly admin role).
In this case, the MRP Interconnection entity of this domain
shall be disabled as is with admin role disable(0).
The value undefined(1) signals that the interconnection mode is
not disable(0) and neither set to lcMode(2) nor to rcMode(3).
If the value is set to lcMode(2) the devices in Media redundancy
Interconnection Manager (MIM) role as well as these in Media
redundancy Interconnection Client role (MIC) are using the link
check mode to detect open or closed interconnection links.
If the value is set to rcMode(3) the device in Media redundancy
Interconnection Manager (MIM) role is using the ring check mode to
detect open or closed interconnection links.
The factory settings are recommended to adjust the
value of this object to the lcMode(2) capability.
If the agent restricts the write access, no matter what
reason, it shall reject write requests by responding
with 'badValue'.
"
::= { snMspsMrpInterconEntry 7 }
snMspsMrpInterconAdminRole OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
client(1),
manager(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control the MRP Interconnection behavior of the system per
Media redundancy Interconnection domain.
If the value is set to disable(0) the MRP Interconnection
entity of this domain shall be disabled.
If the value is set to client(1) the entity shall be set
to the role of a Media redundancy Interconnection Client (MIC).
If the value is set to manager(2) the entity shall be set
to the role of a Media redundancy Interconnection Manager (MIM).
The factory settings are recommended to adjust the
value of this object to the client(1) capability of the
component in order to prevent multiple managers are
in the interconnection (the order of the capabilities are not
necessarily conform to the order of the object values here).
If the agent restricts the write access, no matter what
reason, it shall reject write requests by responding
with 'badValue'.
"
::= { snMspsMrpInterconEntry 8 }
snMspsMrpInterconOperRole OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
client(1),
manager(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational role of an MRP Interconnection entity
per Media redundancy Interconnection domain.
A value of disable(0) signals that the entity doesn't
work (whatever reason).
A value of client(1) signals that the entity is in a
Media redundancy Interconnection Client role.
A value of manager(2) signals that the entity is the
manager of this Media redundancy Interconnection domain.
"
::= { snMspsMrpInterconEntry 9 }
snMspsMrpInterconState OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
undefined(1),
interconnOpen(2),
interconnClosed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational status of a MIM of the MRP Interconnection entity.
disable(0) <20> The entity is disabled.
undefined(1) <20> Value is not valid.
interconnOpen(2) <20> MRP Interconnection redundancy lost of this Media
redundancy Interconnection domain.
interconnClosed(3) <20> MRP Interconnection redundancy available of this Media
redundancy Interconnection domain.
"
::= { snMspsMrpInterconEntry 10 }
-- { snMspsMrpInterconEntry 11 } reserved for future use as configuration status
snMspsMrpInterconOpenCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for MRP Interconnection state changes to interconnOpen.
"
::= { snMspsMrpInterconEntry 12 }
snMspsMrpInterconLastOpenChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timeticks since last change of snMspsMrpInterconState to interconnOpen.
"
::= { snMspsMrpInterconEntry 13 }
snMspsMrpInterconPeerMAC OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device-MAC-Address of the devices interconnection peer, connected
to the devices interlink port.
This variable contains the MAC-Address contained in the media link
check frame received at the interconnection port.
"
::= { snMspsMrpInterconEntry 14 }
-- { snMspsMrpInterconEntry 15 } reserved for future use as own MRM MAC address
-- { snMspsMrpInterconEntry 16 } reserved for future use as coupled ring MRM MAC address
-- { snMspsMrpInterconEntry 17 } reserved for future use as coupled ring MRP domain UUID
snMspsMrpInterconAdminMICPosition OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Controls the MRP Interconnection Client position
in the interconnection setup.
If the value is set to primary(0) the MRP Interconnection Client
is a primary MRP Interconnection Client.
If the value is set to secondary(1) the MRP Interconnection Client
is the secondary MRP Interconnection Client.
"
::= { snMspsMrpInterconEntry 18 }
snMspsMrpInterconOperMICPosition OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reads the MRP Interconnection Client position
in the interconnection setup.
If the value is set to primary(0) the MRP Interconnection Client
is a primary MRP Interconnection Client.
If the value is set to secondary(1) the MRP Interconnection Client
is the secondary MRP Interconnection Client.
"
::= { snMspsMrpInterconEntry 19 }
snMspsMrpInterconLinkCheckProfile OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
primary(1),
secondary(2),
secondaryhigh(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Controls the link check sensibility (check frame send interval
and thus link check frame load) of the MRP Interconnection links.
undefined(0) - link check profile not set.
primary-default(1) - 10ms on primary MRP Interconnection link.
secondary-default(2) - 1000ms on secondary MRP Interconnection link.
secondary-high(4) - 10ms on secondary MRP Interconnection link.
"
::= { snMspsMrpInterconEntry 28 }
snMspsMrpInterconStartDelay OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time in [100 ms] that an MRP Interconnection manager/client
will wait before to enable the MRP Interconnection port
even if the MRP Interconnection ring coupling configuration
is not complete.
The maximum value of 65535 (0xFFFF) means indefinite waiting.
Some values are reserved and/or differ in meaning/usage, see below.
---------------------+----------------------------+-------------------------
Value (hexadecimal) | Meaning | Usage
---------------------+----------------------------+-------------------------
0x0000 | Reserved | -
0x0001 | Value <20> 100 ms = 100 ms | Optional Startup delay
0x0002 | Value <20> 100 ms = 200 ms | Mandatory Startup delay
0x0003 - 0xEA60 | Value <20> 100 ms | Optional Startup delay
0xEA61 - 0xFFFE | Reserved | -
0xFFFF | Wait infinite time | Optional Startup delay
---------------------+----------------------------+-------------------------
"
::= { snMspsMrpInterconEntry 29 }
snMspsMrpInterconRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Support of creation and deletion of rows.
A row can be taken out of service by writing
the value notInService(2).
"
::= { snMspsMrpInterconEntry 30 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapMrpInterconMgrOpenState NOTIFICATION-TYPE
OBJECTS { snMspsMrpInterconIndex }
STATUS current
DESCRIPTION "MRP Interconnection state change to open."
::= { snMspsTrapPrefix 3001 }
snMspsTrapMrpInterconMgrClosedState NOTIFICATION-TYPE
OBJECTS { snMspsMrpInterconIndex }
STATUS current
DESCRIPTION "MRP Interconnection state change to closed."
::= { snMspsTrapPrefix 3002 }
-- ----------------------------------------------------------------
-- MSPS DHCP Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: DHCP CLIENT MIB
-- ----------------------------------------------------------------
snMspsDhcpClientControl OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value enabled(1) will run DHCP Client.
The value disabled(2) will inhibit DHCP."
DEFVAL {1}
::= { snMspsDhcpClient 1 }
snMspsDhcpClientMode OBJECT-TYPE
SYNTAX INTEGER {
enabled-via-mac-address (1),
enabled-via-client-id (2),
enabled-via-sysname (3),
enabled-via-nameofstation (4),
enabled-via-iaidandduid (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value enabled-via-mac-address(1)
sets DHCP Client Mode with option
MAC Address as ClientId,
enabled-via-client-id(2) runs DHCP Client Mode
with option ClientId,
enabled-via-sysname(3) runs DHCP Client with
the sysname as ClientId,
enabled-via-nameofstation(4) runs DHCP with
the name of station as ClientId,
enabled-via-iaidandduid(5) runs DHCP with RFC 3315 style
identifier binding as client identifier. DUID type is
determined by snMspsDhcpClientIfDuidType object."
DEFVAL {1}
::= { snMspsDhcpClient 2 }
snMspsDhcpClientConfigFileRequest OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If enabled(1) DHCP client requests option 66/67 ."
DEFVAL {1}
::= { snMspsDhcpClient 3 }
snMspsDhcpClientId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "An administratively-assigned name
for this DHCP client."
DEFVAL {"default"}
::= { snMspsDhcpClient 4 }
snMspsDhcpClientIPAddrKeepAlive OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If enabled (1) DHCP client will retain the ip address from server
accordingly to MSPS requirements.
If disabled(2) DHCP client reset the ip address to 0.0.0.0
accordingly to RFC."
::= { snMspsDhcpClient 5 }
-- DUID Group ------------------------------------------------------
snMspsDhcpClientDUID OBJECT IDENTIFIER ::= { snMspsDhcpClient 10 }
SnMspsDhcpClientDuidType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A DUID consists of a two-octet type code represented in network byte
order, followed by a variable number of octets that make up the
actual identifier. The following types are currently defined:
1 Link-layer address plus time
2 Vendor-assigned unique ID based on Enterprise Number
3 Link-layer address
DUID Based on Link-layer Address plus Time [DUID-LLT]
This type of DUID consists of a two octet type field containing the
value 1, a two octet hardware type code, four octets containing a
time value, followed by link-layer address of any one network
interface that is connected to the DHCP device at the time
that the DUID is generated. The time value is the time that the
DUID is generated represented in seconds since midnight
(UTC), January 1, 2000, modulo 2^32.
The following diagram illustrates the format of a DUID-LLT:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 1 | hardware type (16 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| time (32 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. link-layer address (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The choice of network interface can be completely arbitrary, as long
as that interface provides a globally unique link-layer address for
the link type, and the same DUID-LLT SHOULD be used in configuring
all network interfaces connected to the device, regardless of which
interface's link-layer address was used to generate the DUID-LLT.
Clients and servers using this type of DUID MUST store the
DUID-LLT in stable storage, and MUST continue to use this DUID-LLT even
if the network interface used to generate the DUID-LLT is removed.
Clients and servers that do not have any stable storage MUST NOT
use this type of DUID.
Clients and servers that use this DUID SHOULD attempt to configure
the time prior to generating the DUID, if that is possible, and MUST
use some sort of time source (for example, a real-time clock) in
generating the DUID, even if that time source could not be configured
prior to generating the DUID. The use of a time source makes it
unlikely that two identical DUID-LLTs will be generated if the
network interface is removed from the client and another client then
uses the same network interface to generate a DUID-LLT. A collision
between two DUID-LLTs is very unlikely even if the clocks have not
been configured prior to generating the DUID.
This method of DUID generation is recommended for all general purpose
computing devices such as desktop computers and laptop computers, and
also for devices such as printers, routers, and so on, that contain
some form of writable non-volatile storage.
DUID Assigned by Vendor Based on Enterprise Number [DUID-EN]
This form of DUID is assigned by the vendor to the device. It
consists of the vendor's registered Private Enterprise Number as
maintained by IANA [6] followed by a unique identifier assigned by
the vendor.
The following diagram summarizes the structure of a DUID-EN:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 2 | enterprise-number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| enterprise-number (contd) | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
. identifier .
. (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The source of the identifier is left up to the vendor defining it,
but each identifier part of each DUID-EN MUST be unique to the
device that is using it, and MUST be assigned to the device at the time
it is manufactured and stored in some form of non-volatile
storage. The generated DUID SHOULD be recorded in non-erasable storage.
DUID Based on Link-layer Address [DUID-LL]:-
This type of DUID consists of two octets containing the DUID type 3,
a two octet network hardware type code, followed by the link-layer
address of any one network interface that is permanently connected to
the client or server device.
The following diagram illustrates the format of a DUID-LL:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 3 | hardware type (16 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. link-layer address (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The choice of network interface can be completely arbitrary, as long
as that interface provides a unique link-layer address and is
permanently attached to the device on which the DUID-LL is being
generated. The same DUID-LL SHOULD be used in configuring all
network interfaces connected to the device, regardless of which
interface's link-layer address was used to generate the DUID.
DUID-LL is recommended for devices that have a permanently-connected
network interface with a link-layer address, and do not have
nonvolatile, writable stable storage. DUID-LL MUST NOT be used by
DHCP clients or servers that cannot tell whether or not a network
interface is permanently attached to the device on which the DHCP
client is running."
REFERENCE
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
SYNTAX INTEGER {
dtLlt (1),
dtEn (2),
dtLl (3)
}
SnMspsDhcpClientDuidValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify
clients for the selection of configuration parameters and in the
association of IAs with clients. DHCP clients use DUIDs to Identify
a client in messages where a client needs to be identified.
Clients MUST treat DUIDs as opaque values and MUST only compare DUIDs
for equality Clients and servers MUST NOT in any Other way interpret
DUIDs. The DUID is carried in an option because it may be variable length
and because it is not required in all DHCP messages. The DUID is
designed to be unique across all DHCP clients and servers, and stable
for any specific client or server - that is, the DUID used by a client
or server SHOULD NOT change over time if at all possible; for example,
a device's DUID should not change as a result of a change in
the device's network hardware.
The motivation for having more than one type of DUID is that the DUID
must be globally unique, and must also be easy to generate. The sort of
globally-unique identifier that is easy to generate for any given device
can differ quite widely. Also, some devices may not contain any
persistent storage. Retaining a generated DUID in such a device is not
possible, so the DUID scheme must accommodate such devices. A DUID can be
no more than 130(including the type code) octets long."
REFERENCE
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
SYNTAX OCTET STRING (SIZE(1..130))
snMspsDhcpClientDuidType OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object contains the type of DUID. Client sends the Client Identifier
TLV in the client sending messages.
The value dtLlt(1) indicates that DHCP client will use the Link layer address
of the interface and Current System time value for the Client Identifier
option TLV value.
The value dtEn (2) indicates that DHCP client will use the Vendor-assigned
unique ID based on Enterprise Number for the Client Identifier
option TLV value.
The value dtLl (3) indicates that DHCP client will use the link layer address
for the client Identifier option TLV value."
DEFVAL { dtLlt }
::= { snMspsDhcpClientDUID 1 }
snMspsDhcpClientDuidLltValue OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Object contains the value of Link-layer Address plus Time DUID. This DUID value is used by client if dtLlt is selected in snMspsDhcpClientDuidType."
::= { snMspsDhcpClientDUID 2 }
snMspsDhcpClientDuidEnValue OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of vendor-assigned unique ID based on Enterprise Number DUID. This DUID value is used by client if dtEn is selected in snMspsDhcpClientDuidType."
::= { snMspsDhcpClientDUID 3 }
snMspsDhcpClientDuidLlValue OBJECT-TYPE
SYNTAX SnMspsDhcpClientDuidValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Object contains the value of Link-layer address DUID. This DUID value is used by client if dtLl is selected in snMspsDhcpClientDuidType."
::= { snMspsDhcpClientDUID 4 }
snMspsDhcpClientDuidConfigStatus OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to identify duid values are auto generated or manually configured.
0x00 -- All(dtLlt,dtEn,dtLl) duid types are auto generated.
0x01 -- dtLlt manually configured.
0x02 -- dtEn manually configured.
0x03 -- dtLlt and dtEn manually configured.
0x04 -- dtLl manually configured.
0x05 -- dtLlt and dtLl manually configured.
0x06 -- dtEn and dtLl manually configured.
0x07 -- dtLlt,dtEn and dtLl manually configured."
DEFVAL { 0 }
::= { snMspsDhcpClientDUID 5 }
snMspsDhcpRelaying OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only when enabled, the Relay Agent shall become active."
DEFVAL { disable }
::= { snMspsDhcpRelay 1 }
snMspsDhcpRelayServersOnly OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, the Relay Agent shall forward the
packets from the client to a specific DHCP server."
DEFVAL { disable }
::= { snMspsDhcpRelay 2 }
snMspsDhcpRelaySecsThreshold OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IF the secs field in the DHCP message is greater than the
snMspsDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent"
DEFVAL { 0 }
::= { snMspsDhcpRelay 3 }
snMspsDhcpRelayHopsThreshold OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A maximum hop count,a relay agent allow to pass through it.If
the HopCount in the Dhcp Message is greater than the snMspsDhcpRelayHopsThreshold,
Packet get dropped at the Relay Agent "
DEFVAL { 4 }
::= { snMspsDhcpRelay 4 }
snMspsDhcpRelayRAIOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only when enabled, the Relay Agent shall do any processing
related to Relay Agent Information Options - like
inserting the necessary options while relaying a packet
from a client to a server and examining/stripping of
options when relaying a packet from a server to a
client."
DEFVAL { disable }
::= { snMspsDhcpRelay 5 }
snMspsDhcpRelayRAICircuitIDSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the CircuitID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { snMspsDhcpRelay 6 }
snMspsDhcpRelayRAIRemoteIDSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the RemoteID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { snMspsDhcpRelay 7 }
snMspsDhcpRelayRAISubnetMaskSubOptionControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the Subnet Mask sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-option
while relaying packets from a server to a client."
DEFVAL { disable }
::= { snMspsDhcpRelay 8 }
snMspsDhcpRelayRAIAddressFieldActivated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Relay Agent Information (RAI) Address Field on the Relay Agent."
DEFVAL { false }
::= { snMspsDhcpRelay 9 }
snMspsDhcpRelayRAIAddressFieldInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Relay Agent insert the gi address field using
ip address of the given interface.
The value of this MIB object will only be considered
if 'snMspsDhcpRelayRAIAddressFieldActivated' is true."
::= { snMspsDhcpRelay 10 }
-- snMspsDhcpRelay 11-15 reserved
snMspsDhcpConfigDhcpCircuitOption OBJECT-TYPE
SYNTAX BITS {
routerindex(0), -- Router Interfce Index
vlanid(1), -- vlanId
recvport(2) -- port or lag port
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object defines the type of information to be present in circuit id
sub-option.And this option can specfied only if
CircuitIDSubOptionControl is enabled.It is possible to set more than
one bit at a time.Currently first three bits are used and remaning bits are reserved for future purpose"
::= { snMspsDhcpRelay 16 }
--IPADDRESS_TABLE_BEGIN
snMspsDhcpRelaySrvAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpRelaySrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP addresses of the DHCP Server
to which the Relay Agent needs to forward the packets from
the client. This object becomes active only when
snMspsDhcpRelayServersOnly is enabled."
::= { snMspsDhcpRelay 17 }
snMspsDhcpRelaySrvAddressEntry OBJECT-TYPE
SYNTAX SnMspsDhcpRelaySrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { snMspsDhcpRelaySrvIpAddress }
::= { snMspsDhcpRelaySrvAddressTable 1 }
SnMspsDhcpRelaySrvAddressEntry ::=
SEQUENCE {
snMspsDhcpRelaySrvIpAddress IpAddress,
snMspsDhcpRelaySrvAddressRowStatus RowStatus
}
snMspsDhcpRelaySrvIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the DHCP server."
::= { snMspsDhcpRelaySrvAddressEntry 1 }
snMspsDhcpRelaySrvAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus of this entry."
::= { snMspsDhcpRelaySrvAddressEntry 2 }
--IPADDRESS_TABLE_END
--INTERFACE_TABLE_BEGIN
snMspsDhcpRelayIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpRelayIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the circuit id SubOption configured over the
interface.This option will be inserted for dhcp request packets
received on this interface based on the status of
snMspsDhcpRelayRAICircuitIDSubOptionControl.Using this table,the dhcp
broadcast response is sent on the appropriate interface over which
the broadcast dhcp request was received."
::= { snMspsDhcpRelay 18 }
snMspsDhcpRelayIfEntry OBJECT-TYPE
SYNTAX SnMspsDhcpRelayIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains configured dhcp relay information suboptions"
INDEX { ifIndex }
::= { snMspsDhcpRelayIfTable 1 }
SnMspsDhcpRelayIfEntry ::=
SEQUENCE {
snMspsDhcpRelayIfCircuitId Unsigned32,
snMspsDhcpRelayIfRemoteId DisplayString,
snMspsDhcpRelayIfRowStatus RowStatus,
snMspsDhcpRelayIfRemoteIdSource INTEGER
}
snMspsDhcpRelayIfCircuitId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Circuit Id value configured over this interface.Values other than
interface indices can be configured for this object.Configuring
with zero value will reset the circuit id configuration for this
interface.Circuit id will be inserted to dhcp request packet received
on this interface if snMspsDhcpRelayRAICircuitIDSubOptionControl is enabled"
::= { snMspsDhcpRelayIfEntry 1 }
snMspsDhcpRelayIfRemoteId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote Id value configured over this interface.String of length zero
will reset the configuration.Value other than XYZ (which is the
considered as default value internally) can be configured for this
object.Remote ID will be inserted to dhcp request packet received
on this interface if snMspsDhcpRelayRAIRemoteIDSubOptionControl is enabled"
::= { snMspsDhcpRelayIfEntry 2 }
snMspsDhcpRelayIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this table"
::= { snMspsDhcpRelayIfEntry 3 }
snMspsDhcpRelayIfRemoteIdSource OBJECT-TYPE
SYNTAX INTEGER {
freetext (1),
macaddress (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When freetext is selected, the value of snMspsDhcpRelayIfRemoteId will be taken into consideration as the Remote Id.
When macaddress is selected, MAC address of the interface will be taken into consideration as the Remote Id."
DEFVAL { freetext }
::= { snMspsDhcpRelayIfEntry 4 }
--INTERFACE_TABLE_END
snMspsDhcpRelayRemoteId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string based Remote ID value assigned by DHCP relay agent which uniquely identifies the client."
::= { snMspsDhcpRelay 19 }
-- ----------------------
-- snMspsDhcpServer.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- object definitions for the management of a DHCP server implementation
--
-- Copyright (c) 2013 Siemens AG
-- All rights reserved.
-- ----------------------------------------------------------------------
--
-- MIB Module : SN-MSPS-DHCP-SERVER-MIB
--
-- Revision : V0.0.0.4
-- Date : 2018/02/26
--
-- ----------------------------------------------------------------------
snMspsDhcpServerObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
for a Dynamic Host Configuration Protocol (DHCP) server implementation."
::= { snMspsDhcpServer 1 }
snMspsDhcpV4ServerObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
for a Dynamic Host Configuration Protocol (DHCP) server implementation."
::= { snMspsDhcpServerObjects 4 }
snMspsDhcpV4SrvConfig OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
objects with systemic scope."
::= { snMspsDhcpV4ServerObjects 1 }
snMspsDhcpV4SrvActivated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
global DHCP server enable/disable flag."
::= { snMspsDhcpV4SrvConfig 1 }
snMspsDhcpV4SrvIcmpEchoProbeActivated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
When set to to true, the DHCP server will probe an IP address whether it
is already in use before offering it to a DHCP client."
::= { snMspsDhcpV4SrvConfig 2 }
snMspsDhcpV4SrvSubnetPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 2 }
snMspsDhcpV4SrvSubnetPoolEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvSubnetPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvSubnetPoolIndex }
::= { snMspsDhcpV4SrvSubnetPoolTable 1 }
SnMspsDhcpV4SrvSubnetPoolEntry ::= SEQUENCE {
snMspsDhcpV4SrvSubnetPoolIndex Unsigned32,
snMspsDhcpV4SrvSubnetPoolIfIndex InterfaceIndex,
snMspsDhcpV4SrvSubnetPoolSubnetAddr InetAddressIPv4,
snMspsDhcpV4SrvSubnetPoolPrfxLength InetAddressPrefixLength,
snMspsDhcpV4SrvSubnetPoolLowerAddress InetAddressIPv4,
snMspsDhcpV4SrvSubnetPoolUpperAddress InetAddressIPv4,
snMspsDhcpV4SrvSubnetPoolLeaseTime Unsigned32,
snMspsDhcpV4SrvSubnetPoolPortList PortList,
snMspsDhcpV4SrvSubnetPoolRowStatus RowStatus
}
snMspsDhcpV4SrvSubnetPoolIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An auxiliary index."
::= { snMspsDhcpV4SrvSubnetPoolEntry 1 }
snMspsDhcpV4SrvSubnetPoolIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex of the bound interface."
::= { snMspsDhcpV4SrvSubnetPoolEntry 2 }
snMspsDhcpV4SrvSubnetPoolSubnetAddr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet address."
::= { snMspsDhcpV4SrvSubnetPoolEntry 3 }
snMspsDhcpV4SrvSubnetPoolPrfxLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length."
::= { snMspsDhcpV4SrvSubnetPoolEntry 4 }
snMspsDhcpV4SrvSubnetPoolLowerAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The lower IP address."
::= { snMspsDhcpV4SrvSubnetPoolEntry 5 }
snMspsDhcpV4SrvSubnetPoolUpperAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The upper IP address."
::= { snMspsDhcpV4SrvSubnetPoolEntry 6 }
snMspsDhcpV4SrvSubnetPoolLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The lease time."
::= { snMspsDhcpV4SrvSubnetPoolEntry 7 }
snMspsDhcpV4SrvSubnetPoolPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Subnet Pool Port List."
DEFVAL { ''H } -- empty binary string
::= { snMspsDhcpV4SrvSubnetPoolEntry 8 }
snMspsDhcpV4SrvSubnetPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4SrvSubnetPoolEntry 12 }
snMspsDhcpV4SrvSubnetOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 3 }
snMspsDhcpV4SrvSubnetOptEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvSubnetOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvSubnetPoolIndex, snMspsDhcpV4SrvSubnetOptCode }
::= { snMspsDhcpV4SrvSubnetOptTable 1 }
SnMspsDhcpV4SrvSubnetOptEntry ::= SEQUENCE {
snMspsDhcpV4SrvSubnetOptCode Unsigned32,
snMspsDhcpV4SrvSubnetOptUseIfIp TruthValue,
snMspsDhcpV4SrvSubnetOptLength Unsigned32,
snMspsDhcpV4SrvSubnetOptValue OCTET STRING,
snMspsDhcpV4SrvSubnetOptRowStatus RowStatus
}
snMspsDhcpV4SrvSubnetOptCode OBJECT-TYPE
SYNTAX Unsigned32(1..254)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The DHCP option tag code."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvSubnetOptEntry 1 }
snMspsDhcpV4SrvSubnetOptUseIfIp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
Use the interface's IP address from the subnet specified by the pool if
applicable to the option's semantics."
::= { snMspsDhcpV4SrvSubnetOptEntry 2 }
snMspsDhcpV4SrvSubnetOptLength OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The length of the options's data part not including the two octets
specifying the tag code and length."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvSubnetOptEntry 3 }
snMspsDhcpV4SrvSubnetOptValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The data part of the DHCP option."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvSubnetOptEntry 4 }
snMspsDhcpV4SrvSubnetOptRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4SrvSubnetOptEntry 7 }
snMspsDhcpV4SrvHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 4 }
snMspsDhcpV4SrvHostEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvHostHwType, snMspsDhcpV4SrvHostClientId, snMspsDhcpV4SrvSubnetPoolIndex }
::= { snMspsDhcpV4SrvHostTable 1 }
SnMspsDhcpV4SrvHostEntry ::= SEQUENCE {
snMspsDhcpV4SrvHostHwType Unsigned32,
snMspsDhcpV4SrvHostClientId OCTET STRING,
snMspsDhcpV4SrvHostAddress InetAddressIPv4,
snMspsDhcpV4SrvHostRowStatus RowStatus
}
snMspsDhcpV4SrvHostHwType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hardware type as defined in STD 2. E.g. a value of 1 means Ethernet,
and a value 0 denotes a c a non-HW"
REFERENCE
"RFC 1700;
RFC 3232;
RFC 4361."
::= { snMspsDhcpV4SrvHostEntry 1 }
snMspsDhcpV4SrvHostClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The data part of the DHCP option."
REFERENCE
"RFC 2132;
RFC 3942;
RFC 4833."
::= { snMspsDhcpV4SrvHostEntry 2 }
snMspsDhcpV4SrvHostAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired IP address."
::= { snMspsDhcpV4SrvHostEntry 3 }
snMspsDhcpV4SrvHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4SrvHostEntry 12 }
snMspsDhcpV4SrvBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDhcpV4ServerObjects 7 }
snMspsDhcpV4SrvBindEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvBindIpAddress }
::= { snMspsDhcpV4SrvBindTable 1 }
SnMspsDhcpV4SrvBindEntry ::= SEQUENCE {
snMspsDhcpV4SrvBindIpAddress IpAddress,
snMspsDhcpV4SrvBindHwType INTEGER,
snMspsDhcpV4SrvBindHwAddress OCTET STRING,
snMspsDhcpV4SrvBindExpireTime INTEGER,
snMspsDhcpV4SrvBindAllocMethod INTEGER,
snMspsDhcpV4SrvBindState INTEGER,
snMspsDhcpV4SrvBindXid Unsigned32,
snMspsDhcpV4SrvBindPoolID INTEGER,
snMspsDhcpV4SrvBindOptionCode82RemoteIdValue DisplayString,
snMspsDhcpV4SrvBindOptionCode82CircuitIdValue DisplayString
}
snMspsDhcpV4SrvBindIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" IpAddress associated with the binding."
::= { snMspsDhcpV4SrvBindEntry 1 }
snMspsDhcpV4SrvBindHwType OBJECT-TYPE
SYNTAX INTEGER {
clientid (0),
ethernet (1),
duid (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Hardware address type of the binding. Value 0,
Indicates client identifier."
::= { snMspsDhcpV4SrvBindEntry 4 }
snMspsDhcpV4SrvBindHwAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Hardware address of the binding."
::= { snMspsDhcpV4SrvBindEntry 7 }
snMspsDhcpV4SrvBindExpireTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates time remaining for the binding. Negative
Values indicate already expired binding."
::= { snMspsDhcpV4SrvBindEntry 10 }
snMspsDhcpV4SrvBindAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
static-leases (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the binding is for statically assigned
ip-address or automatically assigned from the pool."
::= { snMspsDhcpV4SrvBindEntry 13 }
snMspsDhcpV4SrvBindState OBJECT-TYPE
SYNTAX INTEGER {
offered (1),
assigned (2),
probing (5),
unknown(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" State of the binding. In offered state offer has been
sent, but no req has been received from the client.In
assigned state the address is assigned to the client.
In probing state the address is currently being probed
by the dhcp server."
::= { snMspsDhcpV4SrvBindEntry 16 }
snMspsDhcpV4SrvBindXid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transaction ID, a random number chosen by the
client, used by the client and server to associate
messages and responses between a client and a
server."
::= { snMspsDhcpV4SrvBindEntry 19 }
snMspsDhcpV4SrvBindPoolID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ID of pool containing the automatically assigned IpAddress."
::= { snMspsDhcpV4SrvBindEntry 22 }
snMspsDhcpV4SrvBindOptionCode82RemoteIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote ID value. Empty, if Option 82 is not supported by device."
::= { snMspsDhcpV4SrvBindEntry 30 }
snMspsDhcpV4SrvBindOptionCode82CircuitIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Circuit ID value. Empty, if Option 82 is not supported by device."
::= { snMspsDhcpV4SrvBindEntry 31 }
snMspsDhcpV4SrvSubnetOptionCode82Table OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvSubnetOptionCode82Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP subnet option code 82 table"
::= { snMspsDhcpV4ServerObjects 12 }
snMspsDhcpV4SrvSubnetOptionCode82Entry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvSubnetOptionCode82Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDhcpV4SrvSubnetPoolIndex, snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex }
::= { snMspsDhcpV4SrvSubnetOptionCode82Table 1 }
SnMspsDhcpV4SrvSubnetOptionCode82Entry ::= SEQUENCE {
snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex Unsigned32,
snMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue DisplayString,
snMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue DisplayString,
snMspsDhcpV4SrvSubnetOptionCode82RowStatus RowStatus
}
snMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Auxilary Index of snMspsDhcpV4SrvSubnetOptionCode82Table"
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 1 }
snMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote ID value"
DEFVAL { "" }
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 2 }
snMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote ID value"
DEFVAL { "" }
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 3 }
snMspsDhcpV4SrvSubnetOptionCode82RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the status of the row "
::= { snMspsDhcpV4SrvSubnetOptionCode82Entry 10 }
--- snMspsDhcpV4SrvHostOptTable
snMspsDhcpV4SrvHostOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpV4SrvHostOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the host specific options that
are to be used by the server on response to a DHCP
DISCOVER message in a DHCP OFFER message."
::= { snMspsDhcpV4ServerObjects 13 }
snMspsDhcpV4SrvHostOptEntry OBJECT-TYPE
SYNTAX SnMspsDhcpV4SrvHostOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The various option objects common to all DHCP offer
messages."
INDEX { snMspsDhcpV4SrvHostType, snMspsDhcpV4SrvHostId,
snMspsDhcpV4SrvSubnetPoolIndex,snMspsDhcpV4SrvHostOptType }
::= { snMspsDhcpV4SrvHostOptTable 1 }
--
SnMspsDhcpV4SrvHostOptEntry ::=
SEQUENCE {
snMspsDhcpV4SrvHostType INTEGER,
snMspsDhcpV4SrvHostId OCTET STRING,
snMspsDhcpV4SrvHostOptType INTEGER,
snMspsDhcpV4SrvHostOptLen INTEGER,
snMspsDhcpV4SrvHostOptVal OCTET STRING,
snMspsDhcpV4SrvHostOptRowStatus RowStatus
}
snMspsDhcpV4SrvHostType OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the type of host identifier,
whether this host specific entry is based on hardware
or non-hardware of the client. This option is one of
the index in the snMspsDhcpV4SrvHostOptTable"
::= { snMspsDhcpV4SrvHostOptEntry 1 }
snMspsDhcpV4SrvHostId OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifies the host.This id is an
index to this table"
::= { snMspsDhcpV4SrvHostOptEntry 2 }
snMspsDhcpV4SrvHostOptType OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifies the option, this is the
tag octet of the DHCP option. This option is the
index in the snMspsDhcpV4SrvSubnetOptTable."
::= { snMspsDhcpV4SrvHostOptEntry 3 }
snMspsDhcpV4SrvHostOptLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the length of the option
indicated by the option type. This length does not
include the two octets specifiying the tag and length. "
::= { snMspsDhcpV4SrvHostOptEntry 4 }
snMspsDhcpV4SrvHostOptVal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the octets of data, of length
specified by snMspsDhcpV4SrvHostOptLen for that entry. "
::= { snMspsDhcpV4SrvHostOptEntry 5 }
snMspsDhcpV4SrvHostOptRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this entry."
::= { snMspsDhcpV4SrvHostOptEntry 10 }
snMspsDhcpV6ServerObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
for a Dynamic Host Configuration Protocol (DHCP) server implementation."
::= { snMspsDhcpServerObjects 6 }
-- ----------------------
-- snMspsDhcpClient6.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- RFC-3736 Stateless DHCPv6 Client MIB
--
-- Copyright (c) 2013 Siemens AG
-- All rights reserved.
-- ----------------------
snMspsDhcpClient6Config OBJECT IDENTIFIER ::= { snMspsDhcpClient6 0 }
snMspsDhcpClient6Counters OBJECT IDENTIFIER ::= { snMspsDhcpClient6 1 }
-- ******************************************************************
-- Textual conventions
-- ******************************************************************
SnMspsDhcpClient6DuidValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify
clients for the selection of configuration parameters and in the
association of IAs with clients. DHCP clients use DUIDs to Identify
a client in messages where a client needs to be identified.
Clients MUST treat DUIDs as opaque values and MUST only compare DUIDs
for equality Clients and servers MUST NOT in any Other way interpret
DUIDs. The DUID is carried in an option because it may be variable length
and because it is not required in all DHCP messages. The DUID is
designed to be unique across all DHCP clients and servers, and stable
for any specific client or server - that is, the DUID used by a client
or server SHOULD NOT change over time if at all possible; for example,
a device's DUID should not change as a result of a change in
the device's network hardware.
The motivation for having more than one type of DUID is that the DUID
must be globally unique, and must also be easy to generate. The sort of
globally-unique identifier that is easy to generate for any given device
can differ quite widely. Also, some devices may not contain any
persistent storage. Retaining a generated DUID in such a device is not
possible, so the DUID scheme must accommodate such devices. A DUID can be
no more than 130(including the type code) octets long."
REFERENCE
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
SYNTAX OCTET STRING (SIZE(1..130))
SnMspsDhcpClient6DuidType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A DUID consists of a two-octet type code represented in network byte
order, followed by a variable number of octets that make up the
actual identifier. The following types are currently defined:
1 Link-layer address plus time
2 Vendor-assigned unique ID based on Enterprise Number
3 Link-layer address
DUID Based on Link-layer Address plus Time [DUID-LLT]
This type of DUID consists of a two octet type field containing the
value 1, a two octet hardware type code, four octets containing a
time value, followed by link-layer address of any one network
interface that is connected to the DHCP device at the time
that the DUID is generated. The time value is the time that the
DUID is generated represented in seconds since midnight
(UTC), January 1, 2000, modulo 2^32.
The following diagram illustrates the format of a DUID-LLT:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 1 | hardware type (16 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| time (32 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. link-layer address (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The choice of network interface can be completely arbitrary, as long
as that interface provides a globally unique link-layer address for
the link type, and the same DUID-LLT SHOULD be used in configuring
all network interfaces connected to the device, regardless of which
interface's link-layer address was used to generate the DUID-LLT.
Clients and servers using this type of DUID MUST store the
DUID-LLT in stable storage, and MUST continue to use this DUID-LLT even
if the network interface used to generate the DUID-LLT is removed.
Clients and servers that do not have any stable storage MUST NOT
use this type of DUID.
Clients and servers that use this DUID SHOULD attempt to configure
the time prior to generating the DUID, if that is possible, and MUST
use some sort of time source (for example, a real-time clock) in
generating the DUID, even if that time source could not be configured
prior to generating the DUID. The use of a time source makes it
unlikely that two identical DUID-LLTs will be generated if the
network interface is removed from the client and another client then
uses the same network interface to generate a DUID-LLT. A collision
between two DUID-LLTs is very unlikely even if the clocks have not
been configured prior to generating the DUID.
This method of DUID generation is recommended for all general purpose
computing devices such as desktop computers and laptop computers, and
also for devices such as printers, routers, and so on, that contain
some form of writable non-volatile storage.
DUID Assigned by Vendor Based on Enterprise Number [DUID-EN]
This form of DUID is assigned by the vendor to the device. It
consists of the vendor's registered Private Enterprise Number as
maintained by IANA [6] followed by a unique identifier assigned by
the vendor.
The following diagram summarizes the structure of a DUID-EN:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 2 | enterprise-number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| enterprise-number (contd) | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
. identifier .
. (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The source of the identifier is left up to the vendor defining it,
but each identifier part of each DUID-EN MUST be unique to the
device that is using it, and MUST be assigned to the device at the time
it is manufactured and stored in some form of non-volatile
storage. The generated DUID SHOULD be recorded in non-erasable storage.
DUID Based on Link-layer Address [DUID-LL]:-
This type of DUID consists of two octets containing the DUID type 3,
a two octet network hardware type code, followed by the link-layer
address of any one network interface that is permanently connected to
the client or server device.
The following diagram illustrates the format of a DUID-LL:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 3 | hardware type (16 bits) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. link-layer address (variable length) .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The choice of network interface can be completely arbitrary, as long
as that interface provides a unique link-layer address and is
permanently attached to the device on which the DUID-LL is being
generated. The same DUID-LL SHOULD be used in configuring all
network interfaces connected to the device, regardless of which
interface's link-layer address was used to generate the DUID.
DUID-LL is recommended for devices that have a permanently-connected
network interface with a link-layer address, and do not have
nonvolatile, writable stable storage. DUID-LL MUST NOT be used by
DHCP clients or servers that cannot tell whether or not a network
interface is permanently attached to the device on which the DHCP
client is running."
REFERENCE
"Section 9. DHCP Unique Identifier (DUID) RFC 3315"
SYNTAX INTEGER {
dtLlt (1),
dtEn (2),
dtLl (3)
}
-- ******************************************************************
-- Start of Interface Table {snMspsDhcpClient6IfTable)
-- ******************************************************************
snMspsDhcpClient6IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpClient6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the config info of DHCPv6 Client on each
interface. using this table user can enable or disable DHCPv6
client(statefull or stateless or prefix delegation) on each interface."
::= { snMspsDhcpClient6Config 1 }
snMspsDhcpClient6IfEntry OBJECT-TYPE
SYNTAX SnMspsDhcpClient6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the snMspsDhcpClient6CounterTable"
INDEX {snMspsDhcpClient6IfIndex}
::= { snMspsDhcpClient6IfTable 1 }
SnMspsDhcpClient6IfEntry ::= SEQUENCE {
snMspsDhcpClient6IfIndex Integer32,
snMspsDhcpClient6IfMode INTEGER,
snMspsDhcpClient6IfRapidCommitMode TruthValue,
snMspsDhcpClient6IfSrvAddress OCTET STRING,
snMspsDhcpClient6IfDuidType SnMspsDhcpClient6DuidType,
snMspsDhcpClient6IfDuid SnMspsDhcpClient6DuidValue,
snMspsDhcpClient6IfDuidIfIndex Integer32,
snMspsDhcpClient6IfMinRefreshTime Unsigned32,
snMspsDhcpClient6IfCurrRefreshTime Unsigned32,
snMspsDhcpClient6IfRealmName OCTET STRING,
snMspsDhcpClient6IfKey OCTET STRING,
snMspsDhcpClient6IfKeyId Unsigned32,
snMspsDhcpClient6IfPrefixName OCTET STRING,
snMspsDhcpClient6IfIataOptStatus TruthValue,
snMspsDhcpClient6IfPdExcludePrefix OCTET STRING,
snMspsDhcpClient6IfPdExcludePrefixLen Integer32,
snMspsDhcpClient6IfReconfigAcceptMode TruthValue,
snMspsDhcpClient6IfRowStatus RowStatus
}
snMspsDhcpClient6IfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of one entry in snMspsDhcpClient6IfTable.and indicates interface index"
::= { snMspsDhcpClient6IfEntry 1 }
snMspsDhcpClient6IfMode OBJECT-TYPE
SYNTAX INTEGER
{
sf-dhcp (1),
sl-dhcp (2),
pd (3),
ra-flags-based (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently 3 different DHCP client types available.
1.Statefull dhcp(sf-dhcp) client.Using sf-dhcp client node will get address
and other information from server. RFC 3315 for sf-dhcp.
2.Stateless dhcp(sl-dhcp) client.Using sl-dhcp client node will get other
informations from server.RFC 3736 for sl-dhcp.
3.Prefix Delegation(pd) client.Using pd client node will get prefixs from server.
RFC 3633 for pd.
4.Router Advertisement flags based DHCP Client. This is an intermediate mode
in which the operating mode (i.e. stateless or stateful) is decided based on
M-, and O-Flags of any received Router Advertisement on this interface.
RFC 4861 for router advertisement flags M and O"
DEFVAL { 1 }
::= { snMspsDhcpClient6IfEntry 2 }
snMspsDhcpClient6IfRapidCommitMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Rapid Commit mode is used to signal the use of the two message exchange
for address or prefix assignment.if user set this option to true(1) then client will include
this option in solicit message and assign address after getting reply message from server.
If user set this option to false(2) then client will use Four messages for assigning address.
This option related to snMspsDhcpClient6IfMode is sf-dhcp(1) and pd(3)."
DEFVAL { false }
::= { snMspsDhcpClient6IfEntry 3 }
snMspsDhcpClient6IfSrvAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the IP Address of the current DHCP server."
::= { snMspsDhcpClient6IfEntry 4 }
snMspsDhcpClient6IfDuidType OBJECT-TYPE
SYNTAX SnMspsDhcpClient6DuidType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object contains the type of DUID. Client sends the Client Identifier
TLV in the client sending messages.
The value dtLlt(1) indicates that DHCP client will use the Link layer address
of the interface and Current System time value for the Client Identifier
option TLV value.
The value dtEn (2) indicates that DHCP client will use the Vendor-assigned
unique ID based on Enterprise Number for the Client Identifier
option TLV value.
The value dtLl (3) indicates that DHCP client will use the link layer address
for the client Identifier option TLV value."
DEFVAL { dtLlt }
::= { snMspsDhcpClient6IfEntry 5 }
snMspsDhcpClient6IfDuid OBJECT-TYPE
SYNTAX SnMspsDhcpClient6DuidValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Object contains the value of DUID used as client ID. Depending upon
the snMspsDhcpClient6ClientIdType this will return the current value of the
DUID."
::= { snMspsDhcpClient6IfEntry 6 }
snMspsDhcpClient6IfDuidIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface which will be used for formation of DUID Based on
Link-layer Address plus Time and DUID based on Link-layer
Address, if not specified then an arbitrary interface value
will be used."
::= { snMspsDhcpClient6IfEntry 7 }
snMspsDhcpClient6IfMinRefreshTime OBJECT-TYPE
SYNTAX Unsigned32 (600..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects specifies the minimum acceptable information refresh time.
If the server sends an information refresh time option of less than the
configured minimum refresh time, the configured minimum refresh time
will be used instead.
the information request message. The units of refresh timer is 10ms."
DEFVAL { 86400 }
::= { snMspsDhcpClient6IfEntry 8 }
snMspsDhcpClient6IfCurrRefreshTime OBJECT-TYPE
SYNTAX Unsigned32 (600..4294967295)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects specifies the current information refresh time.
The value of current refresh timer will be the minimum value of
snMspsDhcpClient6IfMinRefreshTime or received Refresh option request value in
reply message . The units of refresh timer is sec."
::= { snMspsDhcpClient6IfEntry 9 }
snMspsDhcpClient6IfRealmName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the unique name of the container for the
HMAC-MD5 authentication key."
::= { snMspsDhcpClient6IfEntry 10 }
snMspsDhcpClient6IfKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the HMAC-MD5 key string which will be
used to authenticate the client sending messages."
::= { snMspsDhcpClient6IfEntry 11 }
snMspsDhcpClient6IfKeyId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indentifies the key-ID to be used with snMspsDhcpClient6AuthKey
object and is transmitted as part of authentication information in
client sending messages, the server using this key-ID searches in
its local database for the related key to calculate the HMAC."
DEFVAL { 1 }
::= { snMspsDhcpClient6IfEntry 12 }
snMspsDhcpClient6IfPrefixName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates IPv6 Prefix name for prefix assigned by dhcpv6 server.
This obeject should be set if snMspsDhcpClient6IfMode object is set to pd(3)."
::= { snMspsDhcpClient6IfEntry 13 }
snMspsDhcpClient6IfIataOptStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates IATA opt enable or disable status.if user set this option to true(1)
then client will get Temporary Addresses from server.
If user set this option to false(2) then client will not get Temporary Addresses from server.
This option related to snMspsDhcpClient6IfMode is sf-dhcp(1)."
DEFVAL { false }
::= { snMspsDhcpClient6IfEntry 14 }
snMspsDhcpClient6IfPdExcludePrefix OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the IPv6 exclude prefix from the DHCPv6 server."
::= { snMspsDhcpClient6IfEntry 15 }
snMspsDhcpClient6IfPdExcludePrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the excluded prefix in bits.
The prefix-len MUST be between 'OPTION_IAPREFIX prefix-length'+1 and
128."
::= { snMspsDhcpClient6IfEntry 16 }
snMspsDhcpClient6IfReconfigAcceptMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A client uses the Reconfigure Accept option to announce to the server
whether the client is willing to accept Reconfigure messages, and a
server uses this option to tell the client whether or not to accept
Reconfigure messages.
If user set true(1) then client will include this option in all client
sending messages. This option related to snMspsDhcpClient6IfMode is sf-dhcp(1) and pd(3)."
DEFVAL { false }
::= { snMspsDhcpClient6IfEntry 17 }
snMspsDhcpClient6IfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create/delete a row in the interface table.
when the interface is deleted from the system the corresponding
row from this table will also be deleted.
To create a row in this table, a manager sets this
object to either createAndGo(4) or createAndWait(5).
If a manager sets this object to createAndGo(4) then by default
client act as sf-dhcp(1).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the
'snMspsDhcpClient6IfRowStatus' column will be read as
notReady(3).
In particular, a newly created row cannot be made
active(1) if snMspsDhcpClient6IfMode set to pd(3) until (minimally)
the corresponding instance of snMspsDhcpClient6IfPrefixName,
has been set.
if snMspsDhcpClient6IfMode set to sf-dhcp(1) or sl-dhcp(2) then before active(1)
manager should configure required options in snMspsDhcpClient6OptionTable.
notInService(2) should be used to administratively
bring the row down before changing any object.
A typical order of operation to add a row is:
1. Create a row in snMspsDhcpClient6IfTable with
createAndWait(5).
2. If required modify client type using snMspsDhcpClient6IfMode object.
Any configure other required objects.
3. Set snMspsDhcpClient6IfPrefixName if snMspsDhcpClient6IfMode set to pd(3).
4. (OPTIONAL)Configure snMspsDhcpClient6OptionTable if snMspsDhcpClient6IfMode set
to sf-dhcp(1) or sl-dhcp(2).
5. Set to active(1)."
::= { snMspsDhcpClient6IfEntry 18 }
-- ******************************************************************
-- End of Interface Table {snMspsDhcpClient6IfTable)
-- ******************************************************************
-- ******************************************************************
-- Start of Client Option Table {snMspsDhcpClient6OptionTable)
-- ******************************************************************
snMspsDhcpClient6OptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpClient6OptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Dhcpv6 options which are to be requested to server
will be added as entries in this table.
While sending out client sending messages(ex:solicit,information...),
the options entries which are avilable in this table will
be added with client sending messages(ex:solicit,information...).
The option values which are received via server response messages
(ex:advertise,conform,reply....) will be stored in this table.
Following are valid options :-
1 User class option 15
2 Vendor class option 16
3 Vendor-specific Information 17
4 DNS recursive name server 23
5 Domain search list 24.
6 Sntp server address 31.
7 Posix time zone 41.
8 Tzdb time zone 42.
9 Ntp server address 56."
::= { snMspsDhcpClient6Config 2 }
snMspsDhcpClient6OptionEntry OBJECT-TYPE
SYNTAX SnMspsDhcpClient6OptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Client Option Table entry. This entry is not lost upon reboot.
It is backed up by stable storage. Each entry in this table
contains the required attribute values."
INDEX { snMspsDhcpClient6IfIndex, snMspsDhcpClient6OptionType }
::= { snMspsDhcpClient6OptionTable 1 }
SnMspsDhcpClient6OptionEntry ::= SEQUENCE {
snMspsDhcpClient6OptionType Integer32,
snMspsDhcpClient6OptionLength Integer32,
snMspsDhcpClient6OptionValue OCTET STRING,
snMspsDhcpClient6OptionRowStatus RowStatus
}
snMspsDhcpClient6OptionType OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifies the option, this is the tag octet of the DHCP
option."
::= { snMspsDhcpClient6OptionEntry 1}
snMspsDhcpClient6OptionLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the length of the option
indicated by the option type. This length does not
include the octets specifying the type and length.
This object has read-write support only for some options(15,16,17)."
::= { snMspsDhcpClient6OptionEntry 2}
snMspsDhcpClient6OptionValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the octets of data, of length
specified by snMspsDhcpClient6OptionLength for that entry.
This object has read-write support only for some options(15,16,17)."
::= { snMspsDhcpClient6OptionEntry 3}
snMspsDhcpClient6OptionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RowStatus variable is for addition and deletion
of snMspsDhcpClient6OptionEntry."
::= { snMspsDhcpClient6OptionEntry 4 }
-- ******************************************************************
-- End of Client Option Table {snMspsDhcpClient6OptionTable)
-- ******************************************************************
-- ******************************************************************
-- Start of Client Ia option Table {snMspsDhcpClient6IfIaOptTable)
-- ******************************************************************
snMspsDhcpClient6IfIaOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpClient6IfIaOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the interface Ia option information
got from server"
::= { snMspsDhcpClient6Config 3 }
snMspsDhcpClient6IfIaOptEntry OBJECT-TYPE
SYNTAX SnMspsDhcpClient6IfIaOptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The client Ia Opt Table entry."
INDEX { snMspsDhcpClient6IfIndex,snMspsDhcpClient6IfIaOptType}
::= { snMspsDhcpClient6IfIaOptTable 1 }
SnMspsDhcpClient6IfIaOptEntry ::= SEQUENCE {
snMspsDhcpClient6IfIaOptType Integer32,
snMspsDhcpClient6IfIaOptIaid Integer32,
snMspsDhcpClient6IfIaOptRenewTime Unsigned32,
snMspsDhcpClient6IfIaOptRebindTime Unsigned32,
snMspsDhcpClient6IfIaOptPrefixAddress OCTET STRING,
snMspsDhcpClient6IfIaOptPrefixLen Integer32,
snMspsDhcpClient6IfIaOptPreferedLifeTime Unsigned32,
snMspsDhcpClient6IfIaOptValidLifeTime Unsigned32
}
snMspsDhcpClient6IfIaOptType OBJECT-TYPE
SYNTAX Integer32 (3..25)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the Ia option info.this obj contains IANA(3) or IATA(4) or IAPD(25)"
::= { snMspsDhcpClient6IfIaOptEntry 1 }
snMspsDhcpClient6IfIaOptIaid OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the Ia option of IAID value."
::= { snMspsDhcpClient6IfIaOptEntry 2 }
snMspsDhcpClient6IfIaOptRenewTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects specifies the prefix/address renew time."
::= { snMspsDhcpClient6IfIaOptEntry 3 }
snMspsDhcpClient6IfIaOptRebindTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects specifies the prefix/address rebind time."
::= { snMspsDhcpClient6IfIaOptEntry 4 }
snMspsDhcpClient6IfIaOptPrefixAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the IPv6 Prefix or address from the DHCPv6 server."
::= { snMspsDhcpClient6IfIaOptEntry 5 }
snMspsDhcpClient6IfIaOptPrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the prefix or address (in bits)."
::= { snMspsDhcpClient6IfIaOptEntry 6 }
snMspsDhcpClient6IfIaOptPreferedLifeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Prefix or address preferred lifetime in seconds."
::= { snMspsDhcpClient6IfIaOptEntry 7 }
snMspsDhcpClient6IfIaOptValidLifeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Prefix or address valid lifetime in seconds."
::= { snMspsDhcpClient6IfIaOptEntry 8 }
-- ******************************************************************
-- End of Client Ia option Table {snMspsDhcpClient6IfIaOptTable)
-- ******************************************************************
-- ******************************************************************
-- Start of PD Sub Client Table {snMspsDhcpClient6PdSubClntIfTable)
-- ******************************************************************
snMspsDhcpClient6PdSubClntIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpClient6PdSubClntIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the ipv6 address configuration information
using PD client Prefix got from server"
::= { snMspsDhcpClient6Config 4 }
snMspsDhcpClient6PdSubClntIfEntry OBJECT-TYPE
SYNTAX SnMspsDhcpClient6PdSubClntIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PD sub client Table entry."
INDEX { snMspsDhcpClient6PdSubClntIfIndex,snMspsDhcpClient6PdSubClntIfPrefixName,
snMspsDhcpClient6PdSubClntIfPrefix, snMspsDhcpClient6PdSubClntIfPrefixLength}
::= { snMspsDhcpClient6PdSubClntIfTable 1 }
SnMspsDhcpClient6PdSubClntIfEntry ::= SEQUENCE {
snMspsDhcpClient6PdSubClntIfIndex Integer32,
snMspsDhcpClient6PdSubClntIfPrefixName OCTET STRING,
snMspsDhcpClient6PdSubClntIfPrefix OCTET STRING,
snMspsDhcpClient6PdSubClntIfPrefixLength Integer32,
snMspsDhcpClient6PdSubClntIfPrefixAddress OCTET STRING,
snMspsDhcpClient6PdSubClntIfRowStatus RowStatus
}
snMspsDhcpClient6PdSubClntIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the interface to configure ipv6 address using
PD client got prefix from server."
::= { snMspsDhcpClient6PdSubClntIfEntry 1 }
snMspsDhcpClient6PdSubClntIfPrefixName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the IPv6 PD Prefix name assigned by
user using snMspsDhcpClient6IfPrefixName object."
::= { snMspsDhcpClient6PdSubClntIfEntry 2 }
snMspsDhcpClient6PdSubClntIfPrefix OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the IPv6 Prefix to configure address using
snMspsDhcpClient6PdSubClntIfPrefixName.This is a binary string
of up to 16 octets in network byte-order.
example is ::1."
::= { snMspsDhcpClient6PdSubClntIfEntry 3 }
snMspsDhcpClient6PdSubClntIfPrefixLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits).and should be greater than
snMspsDhcpClient6PrefixLength."
::= { snMspsDhcpClient6PdSubClntIfEntry 4 }
snMspsDhcpClient6PdSubClntIfPrefixAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the IPv6 complete address configure to interface."
::= { snMspsDhcpClient6PdSubClntIfEntry 5 }
snMspsDhcpClient6PdSubClntIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RowStatus variable is for addition and deletion
of snMspsDhcpClient6PdSubClntIfEntry."
::= { snMspsDhcpClient6PdSubClntIfEntry 6 }
-- ******************************************************************
-- End of PD Sub Client Table {snMspsDhcpClient6PdSubClntIfTable)
-- ******************************************************************
-- ******************************************************************
-- Start of Client Counters Table {snMspsDhcpClient6IfCounterTable)
-- ******************************************************************
--- snMspsDhcpClient6Counters Group
snMspsDhcpClient6IfCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpClient6IfCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains the statistics of DHCPv6 Client on each
interface. It will give the no of messages sent and received at
any time"
::= { snMspsDhcpClient6Counters 1 }
snMspsDhcpClient6IfCounterEntry OBJECT-TYPE
SYNTAX SnMspsDhcpClient6IfCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the dhcpClientCounterTable"
INDEX {snMspsDhcpClient6IfIndex}
::= { snMspsDhcpClient6IfCounterTable 1 }
SnMspsDhcpClient6IfCounterEntry ::= SEQUENCE {
snMspsDhcpClient6IfSolicitSendCount Counter32,
snMspsDhcpClient6IfAdvertiseRcvCount Counter32,
snMspsDhcpClient6IfRequestSendCount Counter32,
snMspsDhcpClient6IfConformSendCount Counter32,
snMspsDhcpClient6IfRenewSendCount Counter32,
snMspsDhcpClient6IfRebindSendCount Counter32,
snMspsDhcpClient6IfReplyRcvCount Counter32,
snMspsDhcpClient6IfReleaseSendCount Counter32,
snMspsDhcpClient6IfDeclineSendCount Counter32,
snMspsDhcpClient6IfReconfigureRcvCount Counter32,
snMspsDhcpClient6IfInformSendCount Counter32,
snMspsDhcpClient6IfInvalidPktRcvCount Counter32,
snMspsDhcpClient6IfHmacFailCount Counter32,
snMspsDhcpClient6IfCounterReset TruthValue
}
snMspsDhcpClient6IfSolicitSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Solicit packets transmitted from the
interface."
::= { snMspsDhcpClient6IfCounterEntry 1 }
snMspsDhcpClient6IfAdvertiseRcvCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of advertise packets received on the Interface."
::= { snMspsDhcpClient6IfCounterEntry 2 }
snMspsDhcpClient6IfRequestSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of request packets transmitted from the
interface."
::= { snMspsDhcpClient6IfCounterEntry 3 }
snMspsDhcpClient6IfConformSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of conform packets transmitted from the Interface."
::= { snMspsDhcpClient6IfCounterEntry 4 }
snMspsDhcpClient6IfRenewSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of renew packets transmitted from the
interface."
::= { snMspsDhcpClient6IfCounterEntry 5 }
snMspsDhcpClient6IfRebindSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rebind packets transmitted from the
interface."
::= { snMspsDhcpClient6IfCounterEntry 6 }
snMspsDhcpClient6IfReplyRcvCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reply packets received on the Interface."
::= { snMspsDhcpClient6IfCounterEntry 7 }
snMspsDhcpClient6IfReleaseSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of release packets transmitted from the
interface."
::= { snMspsDhcpClient6IfCounterEntry 8 }
snMspsDhcpClient6IfDeclineSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of decline packets transmitted from the
interface."
::= { snMspsDhcpClient6IfCounterEntry 9 }
snMspsDhcpClient6IfReconfigureRcvCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reconfigure packets received on the Interface."
::= { snMspsDhcpClient6IfCounterEntry 10 }
snMspsDhcpClient6IfInformSendCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of information packets transmitted from the
interface."
::= { snMspsDhcpClient6IfCounterEntry 11 }
snMspsDhcpClient6IfInvalidPktRcvCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Invalid packet received on the interface"
::= { snMspsDhcpClient6IfCounterEntry 12 }
snMspsDhcpClient6IfHmacFailCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of unauthenticated messages received
on the interface. This counter increment only when Authentication
TLV is present in the received message and Digest calculated by the
realm and key id does not match with received digest present in the
Authentication TLV."
::= { snMspsDhcpClient6IfCounterEntry 13 }
snMspsDhcpClient6IfCounterReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset all the statistics counter
objects present in this table. This will be done by setting the
value of this column to 'true(1)'.This column always reads back to
'false(2)'."
::= { snMspsDhcpClient6IfCounterEntry 14 }
-- ******************************************************************
-- End of Client Counters Table {snMspsDhcpClient6IfCounterTable)
-- ******************************************************************
-- ----------------------
-- snMspsDhcpRelay6.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- This file contains MIB definitions for DHCPv6 Relay module.
--
-- Copyright (c) 2013 Siemens AG
-- All rights reserved.
-- ----------------------
snMspsDhcpRelay6Notify OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 0 }
snMspsDhcpRelay6System OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 1 }
snMspsDhcpRelay6Config OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 2 }
snMspsDhcpRelay6Traps OBJECT IDENTIFIER ::= { snMspsDhcpRelay6 3 }
-- ******************************************************************
-- Start the Scalars defination
-- ******************************************************************
snMspsDhcpRelay6DebugTrace OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object stores the trace option string input given by the user.
Based on the input to this object, trace statements corresponding
to the given options are displayed. To enable particular
trace the user has to enter the corresponding string(given below)
assigned for that. For enabling more than one traces
the user has to enter the corresponding strings with
SPACE (delimiter) between each string.
For example,
To enable the below traces:
- Init and Shutdown traces
- Management traces
- Data path traces
- Control plane traces
- Packet Dump traces
The input should be fed as follows:
enable init-shut mgmt data ctrl pkt-dump
To disable the below traces:
- Init and Shutdown traces
- Data path traces
- Control plane traces
The input should be,disable init-shut data ctrl
The entered input string is parsed to get the trace
options.
enable - Enables the corresponding option.
disable - Disables the corresponding option.
init-shut - Init and Shutdown traces
mgmt - Management traces
ctrl - Control Plane traces
pkt-dump - Packet Dump traces
resource - Traces related to all
resources except buffers
all-fail - All Failure traces
buffer - Buffer allocation/
release traces
critical - Sl-DHCPv6 Relay Critical traces"
DEFVAL { "critical" }
::= { snMspsDhcpRelay6System 1 }
snMspsDhcpRelay6TrapAdminControl OBJECT-TYPE
SYNTAX BITS{
none(0),
trapInvalidPacketIn(1),
trapMaxHopCount(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Object is used to enable or disable the transmission of
TRAP notification messages. A vector of Boolean notification types,
used to enable or disable the slDhcp6 notification types:
trapInvalidPacketIn (1)
trapMaxHopCount (2)
when Relay agent declares the received message as invalid then
the SNMP trap notification will come only when snMspsDhcpRelay6TrapAdminControl
is set with value 0.
when Relay agent receives the relay forward message with hop count
value is less then one configured hop count then SNMP trap
notification will come only when snMspsDhcpRelay6TrapAdminControl
is set with value trapInvalidPacketIn."
DEFVAL { 0 }
::= { snMspsDhcpRelay6System 2 }
snMspsDhcpRelay6SysLogAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used to enable or disable the transmission of
syslog notification messages.
DHCPv6 relay will generate the syslog messages only when
snMspsDhcpRelay6SysLogAdminStatus is set as enabled (1).
disabled (2) means that DHCP server will not generate any
syslog messages."
DEFVAL { disabled }
::= { snMspsDhcpRelay6System 3 }
snMspsDhcpRelay6ListenPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used to configure the port on which the
DHCPv6 relay agent will listen on. This is in order to facilitate
DHCPv6 relay to coexist with the DHCPv6 server which can listen on a
different port."
DEFVAL { 547 }
::= { snMspsDhcpRelay6System 4 }
snMspsDhcpRelay6ClientTransmitPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used to configure the port on which the
DHCPv6 relay agent will send reply messages."
DEFVAL { 546 }
::= { snMspsDhcpRelay6System 5 }
snMspsDhcpRelay6ServerTransmitPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used to configure the port on which the
DHCPv6 relay agent will send relay-forward messages."
DEFVAL { 547 }
::= { snMspsDhcpRelay6System 6 }
snMspsDhcpRelay6Option37Control OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used to enable or disable the transmission of
Remote-id option along with Relay-fwd message.
DHCPv6 relay will insert remote-id with the relay-fwd message only when
snMspsDhcpRelay6Option37Control is set as enabled (1).
disabled (2) means that relay-fwd message will not be having remote-id
option along with."
DEFVAL { disabled }
::= { snMspsDhcpRelay6System 7 }
-- ******************************************************************
-- Start of Relay Interface Table {snMspsDhcpRelay6IfTable)
-- ******************************************************************
snMspsDhcpRelay6IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpRelay6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the statistics of SL-DHCPv6 Relay on each
interface. It will give the Number of Information Request, Relay
Forward, Relay reply messages received on the interface and
Number of Relay Reply, Relay Forward and Reply messages
transmitted from the interface.
This Table includes remote-id support to transmit remote-id value
within the Relay-fwd message from the interface."
::= { snMspsDhcpRelay6Config 1 }
snMspsDhcpRelay6IfEntry OBJECT-TYPE
SYNTAX SnMspsDhcpRelay6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the snMspsDhcpRelay6IfTable"
INDEX {snMspsDhcpRelay6IfIndex}
::= { snMspsDhcpRelay6IfTable 1 }
SnMspsDhcpRelay6IfEntry ::= SEQUENCE {
snMspsDhcpRelay6IfIndex Integer32,
snMspsDhcpRelay6IfHopThreshold Integer32,
snMspsDhcpRelay6IfInformIn Counter32,
snMspsDhcpRelay6IfRelayForwIn Counter32,
snMspsDhcpRelay6IfRelayReplyIn Counter32,
snMspsDhcpRelay6IfInvalidPktIn Counter32,
snMspsDhcpRelay6IfCounterRest TruthValue,
snMspsDhcpRelay6IfRowStatus RowStatus,
snMspsDhcpRelay6IfRemoteIdOption INTEGER,
snMspsDhcpRelay6IfRemoteIdDUID OCTET STRING,
snMspsDhcpRelay6IfRemoteIdOptionValue DisplayString,
snMspsDhcpRelay6IfRemoteIdUserDefined DisplayString,
snMspsDhcpRelay6IfRemoteIdSuffixOptions BITS
}
snMspsDhcpRelay6IfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the unique Interface Index
value mapped to this Server Address Table.."
::= { snMspsDhcpRelay6IfEntry 1}
snMspsDhcpRelay6IfHopThreshold OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A maximum hop count, a relay agent allow to pass through it. If
the HopCount in the DHCP Message is greater than the
snMspsDhcpRelay6HopsThreshold packet get dropped at the Relay Agent "
DEFVAL { 4 }
::= { snMspsDhcpRelay6IfEntry 3 }
snMspsDhcpRelay6IfInformIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of INFORMATION REQUEST messages
received on the Interface."
::= { snMspsDhcpRelay6IfEntry 4 }
snMspsDhcpRelay6IfRelayForwIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of RELAY FORWARD messages
received on the Interface."
::= { snMspsDhcpRelay6IfEntry 5 }
snMspsDhcpRelay6IfRelayReplyIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of RELAY REPLY messages
received on the Interface."
::= { snMspsDhcpRelay6IfEntry 6 }
snMspsDhcpRelay6IfInvalidPktIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of Invalid messages
received on the Interface."
::= { snMspsDhcpRelay6IfEntry 10 }
snMspsDhcpRelay6IfCounterRest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to reset all the statistics counter objects present
in this table. This will be done by setting the value of this column to
'true(1)'.
This column always reads back to 'false(2)'."
::= { snMspsDhcpRelay6IfEntry 11 }
snMspsDhcpRelay6IfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create/delete a row in the interface table.
when the interface is deleted from the system the corresponding
row from this table will also be deleted."
::= { snMspsDhcpRelay6IfEntry 12 }
snMspsDhcpRelay6IfRemoteIdOption OBJECT-TYPE
SYNTAX INTEGER
{
duid (1),
switchName (2),
mgmtIp (3),
userDefined (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify which parameter has to be included
as remote-id in the outgoing relay-fwd message.
DUID (DHCP Unique Identifier) : If snMspsDhcpRelay6IfRemoteIdOption object
is set as 1, then dhcp unique identifier will be sent with the relay
forwarded message as remote-id. DUID can be configured by the use of
snMspsDhcpRelay6IfRemote-IdDUID object.
switchName : If snMspsDhcpRelay6IfRemoteIdOption object is set as 2, then
current system name (switch name) will be included as remote-id.
mgmtIp : If snMspsDhcpRelay6IfRemoteIdOption object is set as 3, then
remote-id will be set as the management IP of the system.
userDefined : If snMspsDhcpRelay6IfRemoteIdOption object is set as 4, then
administrative configured ascii value will be sent with the relay forwarded
message as remote-id. This snMspsDhcpRelay6IfRemoteIdUserDefined object can be used
to configure the user specific ascii value.
snMspsDhcpRelay6IfRemoteIdOption can be set only if snMspsDhcpRelay6Option37Control
is set as enable.In case snMspsDhcpRelay6Option37Control is disable then
snMspsDhcpRelay6IfRemoteIdOption will not be applicable."
DEFVAL { switchName }
::= { snMspsDhcpRelay6IfEntry 13 }
snMspsDhcpRelay6IfRemoteIdDUID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to define the appropriate DUID for DHCPv6
Relay Agent.
Any communicating device (in dhcpv6 perspective) have a unique
DHCPv6 identifier (DUID). According to the RFC 4649, DHCPv6 servers
can use the DUID to make decisions about the information such as
addresses, delegated prefixes, configuration parameters etc. that
the client is to receive.
Relay Agent uses the DUID to have a unique remote-id for its enterprise
number, as sequence of enterprise number followed by remote-id must be
globally unique.
DHCPv6 Relay DUID is a user defined parameter so it can be set to any
value within defined boundaries.
DHCPv6 Relay DUID is a 100 octets long identifier, which can have
Link-Layer Address as DUID octets or can have Link-Layer address
along with some other parameter having variable octets or can have
any sequence of octets representing unique DUID.
This Object will be used only if value of snMspsDhcpRelay6IfRemoteIdOption object
is set as DUID (1)."
DEFVAL { ''h }
::= { snMspsDhcpRelay6IfEntry 14 }
snMspsDhcpRelay6IfRemoteIdOptionValue OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to get the current value of the remote-id option
(specified by snMspsDhcpRelay6IfRemoteIdOption object ), which is being used as
remote-id in dhcpv6 relay agent.
This object is covering all the three options (system name,
management ip, and duid value) although there is a specific object for
duid parameter."
::= { snMspsDhcpRelay6IfEntry 15 }
snMspsDhcpRelay6IfRemoteIdUserDefined OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the administrative specific unique ascii
value for DHCPv6 Relay Agent.
DHCPv6 servers can use this value to make decisions about the
information such as addresses, delegated prefixes, configuration parameters etc,
that the client is to receive.
Relay Agent uses this unique ascii value to have a unique remote-id for its
enterprise number, as sequence of enterprise number followed by remote-id must
be globally unique.
DHCPv6 Relay String is a user defined parameter so it can be set to any
value within defined boundaries.
DHCPv6 Relay ascii value is a 128 octets long identifier which can have any
administrative configured ascii value representing the unique string.
This Object will be used only if value of snMspsDhcpRelay6IfRemoteIdOption object
is set as userDefined (4)."
::= { snMspsDhcpRelay6IfEntry 16 }
snMspsDhcpRelay6IfRemoteIdSuffixOptions OBJECT-TYPE
SYNTAX BITS
{
routerIndex(0), -- Router Interface Index
vlanId(1), -- VlanId
recvPort(2) -- Port or Lag port
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the type of information to be suffixed in remote-id option and
according to snMspsDhcpRelay6IfRemoteIdOptions value. It is possible to set more
than one bit at a time, currently first three bits are used and remaining bits are
reserved for future purpose.
DHCPv6 servers can use this value to make decisions about the information such as
addresses, delegated prefixes, configuration parameters etc. that the client is to receive.
Relay Agent uses this unique value to have a unique remote-id for its enterprise number,
as sequence of enterprise number followed by remote-id must be globally unique.
The default value for snMspsDhcpRelay6IfRemoteIdSuffixOptions object is empty set,
which means no enumerated values are set."
DEFVAL { 0 }
::= { snMspsDhcpRelay6IfEntry 17 }
-- ******************************************************************
-- End of Relay Interface Table {snMspsDhcpRelay6IfTable)
-- ******************************************************************
-- ******************************************************************
-- Start of Relay Server Address Table {snMspsDhcpRelay6SrvAddressTable)
-- ******************************************************************
snMspsDhcpRelay6SrvAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpRelay6SrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP addresses of the DHCP Server
to which the Relay Agent needs to forward the packets from
the client or other relay agent . This object becomes
active only when snMspsDhcpRelay6ServersOnly is enabled."
::= { snMspsDhcpRelay6Config 2 }
snMspsDhcpRelay6SrvAddressEntry OBJECT-TYPE
SYNTAX SnMspsDhcpRelay6SrvAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Address table entry. This entry is not lost
upon reboot. It is backed up by stable storage. Each entry
in this table contains the required attribute values which
define the Address Table Entry"
INDEX { snMspsDhcpRelay6InIfIndex, snMspsDhcpRelay6SrvAddress }
::= { snMspsDhcpRelay6SrvAddressTable 1 }
SnMspsDhcpRelay6SrvAddressEntry ::= SEQUENCE {
snMspsDhcpRelay6InIfIndex Integer32,
snMspsDhcpRelay6SrvAddress OCTET STRING,
snMspsDhcpRelay6SrvAddressRowStatus RowStatus
}
snMspsDhcpRelay6InIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the input Interface Index
value mapped to this Server Address Table.."
::= { snMspsDhcpRelay6SrvAddressEntry 1}
snMspsDhcpRelay6SrvAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the IP Address of the DHCP server."
::= { snMspsDhcpRelay6SrvAddressEntry 2 }
snMspsDhcpRelay6SrvAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the status of the row "
::= { snMspsDhcpRelay6SrvAddressEntry 3 }
-- ******************************************************************
-- End of Relay Server Address Table {snMspsDhcpRelay6SrvAddressTable)
-- ******************************************************************
-- ******************************************************************
-- Start of Relay Output Interface Table {snMspsDhcpRelay6OutIfTable)
-- ******************************************************************
snMspsDhcpRelay6OutIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDhcpRelay6OutIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains interface that specifies output interface for a
destination. If this argument is configured, client messages are
forwarded to the destination address through the link to which the
output interface is connected."
::= { snMspsDhcpRelay6Config 3 }
snMspsDhcpRelay6OutIfEntry OBJECT-TYPE
SYNTAX SnMspsDhcpRelay6OutIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The output interface table entry. This entry is not lost
upon reboot. It is backed up by stable storage. Each entry
in this table contains the required attribute values which
define the output interface Table Entry"
INDEX { snMspsDhcpRelay6InIfIndex, snMspsDhcpRelay6SrvAddress, snMspsDhcpRelay6OutIfIndex}
::= { snMspsDhcpRelay6OutIfTable 1 }
SnMspsDhcpRelay6OutIfEntry ::= SEQUENCE {
snMspsDhcpRelay6OutIfIndex Integer32,
snMspsDhcpRelay6OutIfRowStatus RowStatus
}
snMspsDhcpRelay6OutIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the output Interface Index
value mapped to this Server Address Table.."
::= { snMspsDhcpRelay6OutIfEntry 1}
snMspsDhcpRelay6OutIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the status of the row "
::= { snMspsDhcpRelay6OutIfEntry 2 }
-- ******************************************************************
-- End of Relay Server Interface Table {snMspsDhcpRelay6OutIfTable)
-- ******************************************************************
-- ******************************************************************
-- TRAPS
-- ******************************************************************
snMspsDhcpRelay6TrapIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the interface on which the trap is
was triggered."
::= { snMspsDhcpRelay6Traps 1 }
snMspsDhcpRelay6TrapInvalidMsgType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the type of invalid message received
on a relay enabled interface."
::= { snMspsDhcpRelay6Traps 2 }
-- ******************************************************************
-- NOTIFICATION-TYPES
-- ******************************************************************
snMspsDhcpRelay6RlyInvalidPacketTrap NOTIFICATION-TYPE
OBJECTS {
snMspsDhcpRelay6TrapInvalidMsgType,
snMspsDhcpRelay6TrapIfIndex
}
STATUS deprecated
DESCRIPTION
"This trap is generated when received Message is Invalid."
::= {snMspsDhcpRelay6Notify 1}
snMspsDhcpRelay6RlyMaxHopCountTrap NOTIFICATION-TYPE
OBJECTS {
snMspsDhcpRelay6TrapIfIndex
}
STATUS deprecated
DESCRIPTION
"This trap is generated when relay agent is not able to
add the relay header because the received hop count value is
equal to the configured hop count value."
::= {snMspsDhcpRelay6Notify 2}
-- ----------------------
-- snMspsDNSClient.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- object definitions for the management of the DNS client (resolver) side of
-- the Domain Name System (DNS) protocol.
--
-- Copyright (c) 2013 Siemens AG
-- All rights reserved.
-- ----------------------
snMspsDNSClientObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group extend the Management Information Base
for DNS clients (resolvers) as defined by the DNS-RESOLVER-MIB. In
certain agent implementations, this MIB may also be used in a
stand-alone manner."
::= { snMspsDNSClient 1 }
snMspsDNSClientConfig OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The MIB objects in this group define the Management Information Base
objects with systemic scope."
::= { snMspsDNSClientObjects 1 }
snMspsDNSClientActivated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
The global DNS client enable/disable flag."
::= { snMspsDNSClientConfig 1 }
snMspsDNSClientManualOverride OBJECT-TYPE
SYNTAX INTEGER {
public(1),
manual(2),
all(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a control variable.
It is written by the remote management entity.
-public: only the public name servers in order given by provider
are written in /etc/resolv.conf
-manual: only the manual name servers given by user
are written in /etc/resolv.conf
-all: manual as well as public name servers
are written in /etc/resolv.conf in order from
manual to public."
DEFVAL
{ public }
::= { snMspsDNSClientConfig 2 }
snMspsDNSNameServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDNSNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDNSClientObjects 2 }
snMspsDNSNameServerEntry OBJECT-TYPE
SYNTAX SnMspsDNSNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDNSNameServerIndex }
::= { snMspsDNSNameServerTable 1 }
SnMspsDNSNameServerEntry ::= SEQUENCE {
snMspsDNSNameServerIndex Unsigned32,
snMspsDNSNameServerAddressType InetAddressType,
snMspsDNSNameServerAddress InetAddress,
snMspsDNSNameServerRowStatus RowStatus
}
snMspsDNSNameServerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An auxiliary index."
::= { snMspsDNSNameServerEntry 1 }
snMspsDNSNameServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP version of the address."
::= { snMspsDNSNameServerEntry 2 }
snMspsDNSNameServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address."
::= { snMspsDNSNameServerEntry 3 }
snMspsDNSNameServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snMspsDNSNameServerEntry 9 }
snMspsDNSOperNameServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDNSOperNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snMspsDNSClientObjects 3 }
snMspsDNSOperNameServerEntry OBJECT-TYPE
SYNTAX SnMspsDNSOperNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snMspsDNSOperNameServerIndex }
::= { snMspsDNSOperNameServerTable 1 }
SnMspsDNSOperNameServerEntry ::= SEQUENCE {
snMspsDNSOperNameServerIndex Unsigned32,
snMspsDNSOperNameServerAddressType InetAddressType,
snMspsDNSOperNameServerAddress InetAddress,
snMspsDNSOperNameServerOrigin INTEGER
}
snMspsDNSOperNameServerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An auxiliary index."
::= { snMspsDNSOperNameServerEntry 1 }
snMspsDNSOperNameServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP version of the address."
::= { snMspsDNSOperNameServerEntry 2 }
snMspsDNSOperNameServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address."
::= { snMspsDNSOperNameServerEntry 3 }
snMspsDNSOperNameServerOrigin OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dhcp(2),
ipcp(3),
ipv6-rtr-advt(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a status variable.
It is written by the local management entity.
The attribute denotes the origin of the entry's configuration data.
- manually configured;
- learned from dhcp;
- learned from ipcp.
- learned from ipv6 router advertisement packet."
::= { snMspsDNSOperNameServerEntry 4 }
-- This table is for configuring the Domain Name List
snMspsDNSDomainNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDNSDomainNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the Domain Name List"
::= { snMspsDNSClientObjects 8 }
snMspsDNSDomainNameEntry OBJECT-TYPE
SYNTAX SnMspsDNSDomainNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Domain Name List Entries "
INDEX { snMspsDNSDomainNameIndex }
::= { snMspsDNSDomainNameTable 1 }
SnMspsDNSDomainNameEntry ::=
SEQUENCE {
snMspsDNSDomainNameIndex Unsigned32,
snMspsDNSDomainName DisplayString,
snMspsDNSDomainNameOrigin INTEGER,
snMspsDNSDomainNameRowStatus RowStatus
}
snMspsDNSDomainNameIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An arbitrary integer value, greater than zero,
which uniquely identifies a Domain Name"
::= { snMspsDNSDomainNameEntry 1 }
snMspsDNSDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..250))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of object that represents the Domain Name"
::= { snMspsDNSDomainNameEntry 2 }
snMspsDNSDomainNameOrigin OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
dhcp(2),
ipv6-rtr-advt(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a status variable.
It is written by the local management entity.
The attribute denotes the origin of the entry's configuration data.
- manually configured;
- learned from dhcp;
- learned from ipv6 router advertisement packet."
::= { snMspsDNSDomainNameEntry 3 }
snMspsDNSDomainNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Row Status of the Domain Name"
::= { snMspsDNSDomainNameEntry 100 }
-- ----------------------------------------------------------------
-- MSPS COS Mapping Group Objects
-- ----------------------------------------------------------------
-- --------------------------------------------------------------
-- QoS COS Mapping Sub-Group
-- --------------------------------------------------------------
snMspsCosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "COS to queue mapping table."
::= { snMspsQosCos 1 }
snMspsCosMappingEntry OBJECT-TYPE
SYNTAX SnMspsCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "COS to queue mapping table rows entries."
INDEX { snMspsCosMappingIndex }
::= { snMspsCosMappingTable 1 }
SnMspsCosMappingEntry ::= SEQUENCE {
snMspsCosMappingIndex INTEGER,
snMspsCosMappingQueue INTEGER
}
snMspsCosMappingIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the values of the Vlan Priority field
within the incoming packet. Index is not zero based."
::= { snMspsCosMappingEntry 1 }
snMspsCosMappingQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the queue to which packets with the specific Vlan priority values are assigned,
where zero is the lowest queue priority."
::= { snMspsCosMappingEntry 2 }
-- ----------------------------------------------------------------
-- MSPS DSCP Mapping Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: DSCP Mapping MIB
-- ----------------------------------------------------------------
snMspsDscpMappingEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/Disables DSCP (DiffServ Code Point) to queues mapping."
::= { snMspsQosDscp 1 }
-- --------------------------------------------------------------
-- QoS DSCP Mapping Sub-Group
-- --------------------------------------------------------------
snMspsDscpMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DSCP to queue mapping table."
::= { snMspsQosDscp 2 }
snMspsDscpMappingEntry OBJECT-TYPE
SYNTAX SnMspsDscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DSCP to queue mapping table rows entries."
INDEX { snMspsDscpMappingIndex }
::= { snMspsDscpMappingTable 1 }
SnMspsDscpMappingEntry ::= SEQUENCE {
snMspsDscpMappingIndex INTEGER,
snMspsDscpMappingQueue INTEGER
}
snMspsDscpMappingIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the values of the DSCP (DiffServ Code Point)
field within the incoming packet. Index is not zero based."
::= { snMspsDscpMappingEntry 1 }
snMspsDscpMappingQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the queue to which packets with the specific DSCP value are assigned,
where zero is the lowest queue priority."
::= { snMspsDscpMappingEntry 2 }
snMspsACLControl OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
start-learning(2),
stop-learning(3),
clear-static(4),
learning-in-progress(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control Object for ACL Learning."
::= { snMspsAcl 1 }
-- snMspsAcl 2-3 reserved
-- ------------------------------------------------------------------
-- L2 Filter Group --------------------------------------------------
-- ------------------------------------------------------------------
snMspsAclL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsAclL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { snMspsAcl 4 }
snMspsAclL2FilterEntry OBJECT-TYPE
SYNTAX SnMspsAclL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number."
INDEX { snMspsAclL2FilterNo}
::= { snMspsAclL2FilterTable 1 }
SnMspsAclL2FilterEntry ::=
SEQUENCE {
snMspsAclL2FilterNo
Integer32,
snMspsAclL2FilterPriority
Integer32,
snMspsAclL2FilterEtherType
Integer32,
snMspsAclL2FilterProtocolType
Unsigned32,
snMspsAclL2FilterDstMacAddr
MacAddress,
snMspsAclL2FilterSrcMacAddr
MacAddress,
snMspsAclL2FilterVlanId
Integer32,
snMspsAclL2FilterInPortList
PortList,
snMspsAclL2FilterAction
INTEGER,
snMspsAclL2FilterMatchCount
Counter32,
snMspsAclL2FilterStatus
RowStatus,
snMspsAclL2FilterOutPortList
PortList,
snMspsAclL2FilterDirection
INTEGER
}
snMspsAclL2FilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L2 Filter rule number."
::= { snMspsAclL2FilterEntry 1 }
snMspsAclL2FilterPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the L2 filter can be used to decide which filter rule
is applicable when
--> the packet matches with more than one filter rules
--> All the filter rules result in 'allow'ing the packet
Higher value of 'filter priority' implies a higher priority.
Usage of 'L2FilterPriority' is implementation dependant."
DEFVAL { 1 }
::= { snMspsAclL2FilterEntry 2 }
snMspsAclL2FilterEtherType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0'. When this object is SET with the default
value, frames are not matched for the value in the Type/Len
field with the value set for this object."
DEFVAL { 0 }
::= { snMspsAclL2FilterEntry 3 }
snMspsAclL2FilterProtocolType OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the non IP protocol type to be filtered.
aarp | amber | dec-spanning | decnet-iv |
diagnostic | dsm |etype-6000 | etype-8042 |
lat | lavc-sca | mop-console | mop-dump |
msdos | mumps | netbios | vines-echo |
vines-ip | xns-idp: A non-IP protocol.
A value of '0' means, the filter is applicable for all protocols."
DEFVAL { 0 }
::= { snMspsAclL2FilterEntry 4 }
snMspsAclL2FilterDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero which means dont care condition ie)
any Dst Mac Address ."
::= { snMspsAclL2FilterEntry 5 }
snMspsAclL2FilterSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero which means dont care condition ie) any Src Mac
address"
::= { snMspsAclL2FilterEntry 6 }
snMspsAclL2FilterVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id.
A value of '0' means, this object is unused. Configuring this value is not
allowed."
DEFVAL { 0 }
::= { snMspsAclL2FilterEntry 7 }
snMspsAclL2FilterInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
If the In port list is '0', the filter rule is applicable for the
incoming packets on all ports.
Even though the snMspsAclL2FilterInPortList is configured, It is applicable only
if snMspsAclL2FilterDirection is configured as 'in'.
By default inport list is maintained as '0'."
::= { snMspsAclL2FilterEntry 8 }
snMspsAclL2FilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { snMspsAclL2FilterEntry 9 }
snMspsAclL2FilterMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { snMspsAclL2FilterEntry 10 }
snMspsAclL2FilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsAclL2FilterEntry 11 }
snMspsAclL2FilterOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets egress at Ports in this list.
If the Out port list is '0', the filter rule is applicable for the
outgoing packets on all ports.
Even though the snMspsAclL2FilterOutPortList is configured, It is applicable only
if snMspsAclL2FilterDirection is configured as 'out'.
By default outport list is maintained as '0'."
::= { snMspsAclL2FilterEntry 12 }
snMspsAclL2FilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in (1),
out (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction.
When the direction of this filter is 'in', It is applied on specified
ports of the snMspsAclL2FilterInPortList.
When the direction of this filter is 'out', It is applied on specified
ports of the snMspsAclL2FilterOutPortList."
DEFVAL { in }
::= { snMspsAclL2FilterEntry 13 }
-- ------------------------------------------------------------------
-- L3 Filter Group --------------------------------------------------
-- ------------------------------------------------------------------
snMspsAclL3FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsAclL3FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { snMspsAcl 5 }
snMspsAclL3FilterEntry OBJECT-TYPE
SYNTAX SnMspsAclL3FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number. "
INDEX { snMspsAclL3FilterNo}
::= { snMspsAclL3FilterTable 1 }
SnMspsAclL3FilterEntry ::=
SEQUENCE {
snMspsAclL3FilterNo
Integer32,
snMspsAclL3FilterPriority
Integer32,
snMspsAclL3FilterProtocol
Integer32,
snMspsAclL3FilterMessageType
Integer32,
snMspsAclL3FilterMessageCode
Integer32,
snMspsAclL3FilteAddrType
InetAddressType,
snMspsAclL3FilterDstIpAddr
InetAddress,
snMspsAclL3FilterSrcIpAddr
InetAddress,
snMspsAclL3FilterDstIpAddrPrefixLength
InetAddressPrefixLength,
snMspsAclL3FilterSrcIpAddrPrefixLength
InetAddressPrefixLength,
snMspsAclL3FilterMinDstProtPort
Unsigned32,
snMspsAclL3FilterMaxDstProtPort
Unsigned32,
snMspsAclL3FilterMinSrcProtPort
Unsigned32,
snMspsAclL3FilterMaxSrcProtPort
Unsigned32,
snMspsAclL3FilterInPortList
PortList,
snMspsAclL3FilterOutPortList
PortList,
snMspsAclL3FilterAckBit
INTEGER,
snMspsAclL3FilterRstBit
INTEGER,
snMspsAclL3FilterTos
Integer32,
snMspsAclL3FilterDscp
Integer32,
snMspsAclL3FilterDirection
INTEGER,
snMspsAclL3FilterAction
INTEGER,
snMspsAclL3FilterMatchCount
Counter32,
snMspsAclL3FilterFlowId
Unsigned32,
snMspsAclL3FilterStatus
RowStatus
}
snMspsAclL3FilterNo OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L3 Filter rule number."
::= { snMspsAclL3FilterEntry 1 }
snMspsAclL3FilterPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the filter can be used to decide which filter rule
is applicable when
--> the packet matches with more than one filter rules
--> All the filter rules result in 'allow'ing the packet
Higher value of 'L3 filter priority' implies a higher priority.
Usage of 'L3FilterPriority' is implementation dependant."
DEFVAL { 1 }
::= { snMspsAclL3FilterEntry 2 }
snMspsAclL3FilterProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet. The
default value is 255. If the value is 255, it means that the
protocol type can be anything and it will not be checked to
decide the action. "
DEFVAL { 255 }
::= { snMspsAclL3FilterEntry 3 }
snMspsAclL3FilterMessageType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in snMspsAclL3FilterAction.
The default value is 255. It means that message type is not
configured and need not be checked.
Generally the value zero is given as default. But here
zero can be an ICMP Type value. Hence 255 is given as the
default value.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
noICMPType(255)
"
DEFVAL { 255 }
::= { snMspsAclL3FilterEntry 4 }
snMspsAclL3FilterMessageCode OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in snMspsAclL3FilterAction.
The default value is 255. It means that message code is not
configured and need not be checked. Generally the value zero
will be given as default. But here, zero can be an ICMP Code
value. Hence 255 is given as the default value.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
noICMPCode(255)
"
DEFVAL { 255 }
::= { snMspsAclL3FilterEntry 5 }
snMspsAclL3FilteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IP address used by this classifier entry. While
other types of addresses are defined in the InetAddressType
textual convention, and DNS names, a classifier can only look at
packets on the wire. Therefore, this object is limited to IPv4
and IPv6 addresses."
::= { snMspsAclL3FilterEntry 6 }
snMspsAclL3FilterDstIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's destination IP
address. This may not be a DNS name, but may be an IPv4 or IPv6
prefix. snMspsAclL3FilterDstIpAddrPrefixLength indicates the
number of bits that are relevant."
::= { snMspsAclL3FilterEntry 7 }
snMspsAclL3FilterSrcIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's source IP address.
This may not be a DNS name, but may be an IPv4 or IPv6 prefix.
snMspsAclL3FilterSrcIpAddrPrefixLength indicates the number of
bits that are relevant."
::= { snMspsAclL3FilterEntry 8 }
snMspsAclL3FilterDstIpAddrPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the CIDR Prefix carried in
snMspsAclL3FilterDstIpAddr. In IPv4 addresses, a length of 0
indicates a match of any address; a length of 32 indicates a
match of a single host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is similar, except that
prefix lengths range from 0..128."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 9 }
snMspsAclL3FilterSrcIpAddrPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the CIDR Prefix carried in
snMspsAclL3FilterSrcIpAddr. In IPv4 addresses, a length of 0
indicates a match of any address; a length of 32 indicates a
match of a single host address, and a length between 0 and 32
indicates the use of a CIDR Prefix. IPv6 is similar, except that
prefix lengths range from 0..128."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 10 }
snMspsAclL3FilterMinDstProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the destination port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 11 }
snMspsAclL3FilterMaxDstProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the destination port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 65535 }
::= { snMspsAclL3FilterEntry 12 }
snMspsAclL3FilterMinSrcProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the source port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { snMspsAclL3FilterEntry 13 }
snMspsAclL3FilterMaxSrcProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the source port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 65535 }
::= { snMspsAclL3FilterEntry 14 }
snMspsAclL3FilterInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
If the incoming port list is '0', the filter rule is applicable for all the
incoming ports.
By default inport list is maintained as '0'."
::= { snMspsAclL3FilterEntry 15 }
snMspsAclL3FilterOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet goes out,
this filter rule will be applicable.
If the outgoing port list is '0', the filter rule is applicable for all the
outgoing packets in all ports.
By default outport list is maintained as '0'."
::= { snMspsAclL3FilterEntry 16 }
snMspsAclL3FilterAckBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'any'(3). It means that ACK bit will not be checked
to decide the action. "
DEFVAL { any }
::= { snMspsAclL3FilterEntry 17 }
snMspsAclL3FilterRstBit OBJECT-TYPE
SYNTAX INTEGER {
set(1),
notSet(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'any'(3). It means that RST bit will not be checked to
decide the action. "
DEFVAL { any }
::= { snMspsAclL3FilterEntry 18 }
snMspsAclL3FilterTos OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP TOS bit to be checked against the packet. This is a
single byte integer of which the last three bits (least
significant bits) indicate Delay, Throughput and Reliability
i.e 'uuuuudtr', u-unused, d-delay, t-throughput, r-reliability.
For example '6' indicates low delay and high throughput.
A value of '-1' means, the Tos Field becomes dont care"
DEFVAL { -1 }
::= { snMspsAclL3FilterEntry 19 }
snMspsAclL3FilterDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A value of '-1' means, the Dscp Field becomes dont care."
DEFVAL { -1 }
::= { snMspsAclL3FilterEntry 20 }
snMspsAclL3FilterDirection OBJECT-TYPE
SYNTAX INTEGER {
in (1),
out(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction.
When the direction of this filter is 'in', It is applied on specified
ports of the snMspsAclL3FilterInPortList.
When the direction of this filter is 'out', It is applied on specified
ports of the snMspsAclL3FilterOutPortList."
DEFVAL { in }
::= { snMspsAclL3FilterEntry 21 }
snMspsAclL3FilterAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be sent to the
ports in 'out port list'. If the out port list is '0',
the port over which the packet is to be switched will be decided
based on further processing on the packet.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { snMspsAclL3FilterEntry 22 }
snMspsAclL3FilterMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { snMspsAclL3FilterEntry 23 }
snMspsAclL3FilterFlowId OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flow identifier in an IPv6 header."
::= { snMspsAclL3FilterEntry 24 }
snMspsAclL3FilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsAclL3FilterEntry 25 }
-- ------------------------------------------------------------------
-- ACL RULE Precedence Table-----------------------------------------
-- ------------------------------------------------------------------
snMspsAclPreOrder OBJECT IDENTIFIER ::= { snMspsAcl 8 }
snMspsAclPreOrderTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsAclPreOrderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ACL Rule Order Precedence information interface entries."
::= { snMspsAclPreOrder 1 }
snMspsAclPreOrderEntry OBJECT-TYPE
SYNTAX SnMspsAclPreOrderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing ACL Rule Order Precedence to a
particular interface."
INDEX { snMspsAclPreOrderIfIndex }
::= { snMspsAclPreOrderTable 1 }
SnMspsAclPreOrderEntry ::=
SEQUENCE {
snMspsAclPreOrderIfIndex InterfaceIndex,
snMspsAclPreOrderMACInFilterList OCTET STRING,
snMspsAclPreOrderMACOutFilterList OCTET STRING,
snMspsAclPreOrderIPInFilterList OCTET STRING,
snMspsAclPreOrderIPOutFilterList OCTET STRING
}
snMspsAclPreOrderIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, of the interface."
::= { snMspsAclPreOrderEntry 1 }
snMspsAclPreOrderMACInFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of MAC in filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 2 }
snMspsAclPreOrderMACOutFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of MAC out filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 3 }
snMspsAclPreOrderIPInFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of IP in filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 4 }
snMspsAclPreOrderIPOutFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of IP out filrers added for this Interface with precedence order of the ACL rule.
each octet from left to right repesent the ACL Rule Index. length of zero means no filter
configured for this interface on this type of filters."
::= { snMspsAclPreOrderEntry 5 }
-- ---------------------------------------------------------- --
-- Textual Conventions
-- ---------------------------------------------------------- --
AuthenticMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Authentication method is using Remote Authentication
Server or Local Authentication Server."
SYNTAX INTEGER {
remoteServer(1),
localServer(2)
}
RemoteAuthServerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This indicates which Remote Server is to provide the
authentication. Currently supported servers are RADIUS
Server and Terminal Access Controller Access-Control
System Plus (TACACS+) Server."
SYNTAX INTEGER {
radiusServer(1),
tacacsplusServer(2)
}
PermissionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The permission values."
SYNTAX INTEGER {
allow(1),
deny(2)
}
snMspsPnacAuthReAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure ReAuthentication on
all the ports. Setting this object will inturn set
enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1) for all the ports.
(Sets Port specific dot1xAuthReAuthEnabled from
the standard pnac MIB)."
::= { snMspsPnac 1 }
snMspsPnacAuthenticServer OBJECT-TYPE
SYNTAX AuthenticMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure for the choice of
local or remote Authentication Server to be used by
the Authenticator for its authentication services."
::= { snMspsPnac 2 }
snMspsPnacNasId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the Network Access Server Identifier
to be presented before the remote Authentication
Server."
::= { snMspsPnac 3 }
-- snMspsPnac 4-6 reserved
snMspsPnacRemoteAuthServerType OBJECT-TYPE
SYNTAX RemoteAuthServerType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used by the Authenticator for its
authentication services, to configure the choice of
RADIUS or TACACS+ remote authentication servers when
the authentication method is through a remote server,
that is, this object can be configured only if
snMspsPnacAuthenticServer is set to remoteServer."
DEFVAL { 1 }
::= { snMspsPnac 7 }
-- snMspsPnac 8-9 reserved
-- Authenticator Session Table
snMspsPnacAuthSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnacAuthSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains authentication session information
associated with each Supplicant while Authenticator
operates in MAC based authentication mode."
::= { snMspsPnac 10 }
snMspsPnacAuthSessionEntry OBJECT-TYPE
SYNTAX SnMspsPnacAuthSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supplicant's MAC address and session ID, states of
Authenticator state machine and Backend state machine
for the session."
INDEX { snMspsPnacAuthSessionSuppAddress }
::= { snMspsPnacAuthSessionTable 1 }
SnMspsPnacAuthSessionEntry ::=
SEQUENCE {
snMspsPnacAuthSessionSuppAddress
MacAddress,
snMspsPnacAuthSessionIdentifier
Integer32,
snMspsPnacAuthSessionAuthPaeState
INTEGER,
snMspsPnacAuthSessionBackendAuthState
INTEGER,
snMspsPnacAuthSessionPortStatus
INTEGER,
snMspsPnacAuthSessionPortNumber
InterfaceIndex,
snMspsPnacAuthSessionInitialize
TruthValue,
snMspsPnacAuthSessionReauthenticate
TruthValue
}
snMspsPnacAuthSessionSuppAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of the supplicant for this session."
::= { snMspsPnacAuthSessionEntry 1 }
snMspsPnacAuthSessionIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Session identifier of the supplicant for this
session."
::= { snMspsPnacAuthSessionEntry 2 }
snMspsPnacAuthSessionAuthPaeState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
disconnected(2),
connecting(3),
authenticating(4),
authenticated(5),
aborting(6),
held(7),
forceAuth(8),
forceUnauth(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authenticator state machine's state for this
session."
::= { snMspsPnacAuthSessionEntry 3 }
snMspsPnacAuthSessionBackendAuthState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Backend state machine's state for this session."
::= { snMspsPnacAuthSessionEntry 4 }
snMspsPnacAuthSessionPortStatus OBJECT-TYPE
SYNTAX PaeControlledPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the controlled Port status
parameter for this session."
::= { snMspsPnacAuthSessionEntry 5 }
snMspsPnacAuthSessionPortNumber OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port in which this session is proceeding."
::= { snMspsPnacAuthSessionEntry 6 }
snMspsPnacAuthSessionInitialize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this Supplicant MAC
address. Setting this attribute TRUE causes the
Supplicant session with this MAC address, to be
initialized. The attribute value reverts to FALSE
once initialization has completed."
::= { snMspsPnacAuthSessionEntry 7 }
snMspsPnacAuthSessionReauthenticate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for this Supplicant MAC
address. Setting this attribute TRUE causes the
Authenticator PAE state machine for this MAC address
to reauthenticate the Supplicant. Setting this
attribute FALSE has no effect.
This attribute always returns FALSE when it is read."
::= { snMspsPnacAuthSessionEntry 8 }
-- PNAC Local Authentication Server User Configuration Table
snMspsPnacASUserConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnacASUserConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains authentication related User
configuration information maintained by PNAC
local Authentication Server."
::= { snMspsPnac 11 }
snMspsPnacASUserConfigEntry OBJECT-TYPE
SYNTAX SnMspsPnacASUserConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains User name, Password, Authentication
protocol used, Authenticated session timeout and Access
ports list of the User seeking authentication."
INDEX { snMspsPnacASUserConfigUserName }
::= { snMspsPnacASUserConfigTable 1 }
SnMspsPnacASUserConfigEntry ::=
SEQUENCE {
snMspsPnacASUserConfigUserName
OCTET STRING,
snMspsPnacASUserConfigPassword
DisplayString,
snMspsPnacASUserConfigAuthProtocol
Unsigned32,
snMspsPnacASUserConfigAuthTimeout
Unsigned32,
snMspsPnacASUserConfigPortList
PortList,
snMspsPnacASUserConfigPermission
PermissionType,
snMspsPnacASUserConfigRowStatus
RowStatus
}
snMspsPnacASUserConfigUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..115))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identity of the User seeking authentication. A string
of not more than 20 printable characters."
::= { snMspsPnacASUserConfigEntry 1 }
snMspsPnacASUserConfigPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret Password of the User. A string of not
more than 20 printable characters.
When read, this always returns a String
of length zero."
::= { snMspsPnacASUserConfigEntry 2 }
snMspsPnacASUserConfigAuthProtocol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Authentication protocol supported for the User."
::= { snMspsPnacASUserConfigEntry 3 }
snMspsPnacASUserConfigAuthTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds after which the Authentication
offerred to the User ceases. Maximum value of the
object can be 7200 seconds. When the object value
is 0, the ReAuthPeriod of the Authenticator port is
used by Authenticator."
::= { snMspsPnacASUserConfigEntry 4 }
snMspsPnacASUserConfigPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The complete set of ports of Authenticator to
which the User is allowed or denied access, on the
basis of setting of 'snMspsPnacASUserConfigPermission'
object."
::= { snMspsPnacASUserConfigEntry 5 }
snMspsPnacASUserConfigPermission OBJECT-TYPE
SYNTAX PermissionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the set of ports indicated by
'snMspsPnacASUserConfigPortList' object, the User is
allowed access when this object is set 'allow' and
is denied access when this object is set 'deny'."
::= { snMspsPnacASUserConfigEntry 6 }
snMspsPnacASUserConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Row status of this entry."
::= { snMspsPnacASUserConfigEntry 7 }
-- Pae Port Table extensions
snMspsPnacPaePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnacPaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of system level information for each port
supported by the device PNAC. An entry appears in this
table for each port of this system. This table is an
extension of dot1xPaePortTable of IEEE 802.1x MIB."
::= { snMspsPnac 12 }
snMspsPnacPaePortEntry OBJECT-TYPE
SYNTAX SnMspsPnacPaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration as port based or MAC based authentication
and Supplicant count on a port. Index to this table is
same as that of the dot1xPaePortTable, which is the
InterfaceIndex."
INDEX { snMspsPnacPaePortNumber }
::= { snMspsPnacPaePortTable 1 }
SnMspsPnacPaePortEntry ::=
SEQUENCE {
snMspsPnacPaePortNumber
InterfaceIndex,
snMspsPnacPaePortAuthMode
INTEGER,
snMspsPnacPaePortSupplicantCount
Counter32,
snMspsPnacPaePortUserName
DisplayString,
snMspsPnacPaePortPassword
DisplayString,
snMspsPnacPaePortStatus
INTEGER,
snMspsPnacPaePortReAuthEnabled
TruthValue
}
snMspsPnacPaePortNumber OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number associated with this port."
::= { snMspsPnacPaePortEntry 1 }
snMspsPnacPaePortAuthMode OBJECT-TYPE
SYNTAX INTEGER {
portBased(1),
macBased(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configuration of the port, for Port Based
Authentication or MAC Based Authentication."
::= { snMspsPnacPaePortEntry 2 }
snMspsPnacPaePortSupplicantCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Supplicants connected in the port."
::= { snMspsPnacPaePortEntry 3 }
snMspsPnacPaePortUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User name to be used in this port, while operating
as a Supplicant."
::= { snMspsPnacPaePortEntry 4 }
snMspsPnacPaePortPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User password to be used in this port, while
operating as a Supplicant."
::= { snMspsPnacPaePortEntry 5 }
snMspsPnacPaePortStatus OBJECT-TYPE
SYNTAX PaeControlledPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the combined Port status."
::= { snMspsPnacPaePortEntry 6 }
snMspsPnacPaePortReAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1)."
REFERENCE
"9.4.1, reAuthEnabled"
DEFVAL { false }
::= { snMspsPnacPaePortEntry 7 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapPnacPortAuthStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION "Pnac port auth state change notification."
::= { snMspsTrapPrefix 451 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
-- snMspsRadiusServer 1 reserved
snMspsRadExtMaxNoOfUserEntries OBJECT-TYPE
SYNTAX Integer32 (1 ..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum of No of User entries stored. The value of this
object will be stored for the MemPool Initialization."
::= { snMspsRadiusServer 2 }
snMspsRadExtPrimaryServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type of active server.This can be Ipv4 or Ipv6."
::= { snMspsRadiusServer 3 }
snMspsRadExtPrimaryServer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A maximum of 5 RADIUS servers (IPv4 or IPv6) can be configured
in snMspsRadExtServerEntry. This object indicates the primary server
among those 5 servers. The RADIUS client will first try to interact
with the server mentioned in this object. Other servers are
approached only if this server is not reachable. Setting this
object to zero disables the primary server concept."
::= { snMspsRadiusServer 4 }
snMspsRadExtServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRadExtServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table that lists the RADIUS servers with
which the client shares a secret."
::= { snMspsRadiusServer 5 }
snMspsRadExtServerEntry OBJECT-TYPE
SYNTAX SnMspsRadExtServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a RADIUS server
with which the client shares a secret."
INDEX {snMspsRadExtServerIndex}
::= { snMspsRadExtServerTable 1 }
SnMspsRadExtServerEntry ::= SEQUENCE {
snMspsRadExtServerIndex Integer32,
snMspsRadExtServerAddrType InetAddressType,
snMspsRadExtServerAddress InetAddress,
snMspsRadExtServerType INTEGER,
snMspsRadExtServerSharedSecret OCTET STRING,
snMspsRadExtServerEnabled INTEGER,
snMspsRadExtServerResponseTime Integer32,
snMspsRadExtServerMaximumRetransmission Integer32,
snMspsRadExtServerEntryStatus RowStatus
}
snMspsRadExtServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object enumerates the order in which the server should
be contacted.Index 1 is contacted first if the primary server
specified by snMspsRadExtPrimaryServer is not configured"
::= { snMspsRadExtServerEntry 1 }
snMspsRadExtServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IP address to be configured for the RADIUS server.
While other types of addresses are defined in the InetAddressType
textual convention, like DNS names, this object is limited to IPv4
and IPv6 addresses."
::= { snMspsRadExtServerEntry 2 }
snMspsRadExtServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address(Ipv4 or Ipv6) of the RADIUS server
referred to in snMspsRadExtServerTable entry."
::= { snMspsRadExtServerEntry 3 }
snMspsRadExtServerType OBJECT-TYPE
SYNTAX INTEGER { auth (1),
acct (2),
both (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS server type (Authentication or Accounting or Both).
For creating a server entry, the Server Type should be set"
::= { snMspsRadExtServerEntry 4 }
snMspsRadExtServerSharedSecret OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret string which is shared between the Server and the
Client"
::= { snMspsRadExtServerEntry 5 }
snMspsRadExtServerEnabled OBJECT-TYPE
SYNTAX INTEGER { enabled (1),
disabled (2),
destroy (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the server is active or inactive"
DEFVAL { enabled }
::= { snMspsRadExtServerEntry 6 }
snMspsRadExtServerResponseTime OBJECT-TYPE
SYNTAX Integer32 (1 ..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time within which the server has to respond for a
request from the client."
::= { snMspsRadExtServerEntry 7 }
snMspsRadExtServerMaximumRetransmission OBJECT-TYPE
SYNTAX Integer32 (1 ..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The allowed maximum number of trials to be tried by a client to get
the response from the server for a request"
::= { snMspsRadExtServerEntry 8 }
snMspsRadExtServerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsRadExtServerEntry 9 }
snMspsRadExtAuthServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRadExtAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table taht lists the RADIUS authentication
servers with which the client shares a secret."
::= { snMspsRadiusServer 6 }
snMspsRadExtAuthServerEntry OBJECT-TYPE
SYNTAX SnMspsRadExtAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) that represents a RADIUS
authentication server with which the client shares
a secret."
INDEX { snMspsRadExtAuthServerIndex }
::= { snMspsRadExtAuthServerTable 1 }
SnMspsRadExtAuthServerEntry ::= SEQUENCE {
snMspsRadExtAuthServerIndex Integer32,
snMspsRadExtAuthServerAddressType InetAddressType,
snMspsRadExtAuthServerAddress InetAddress,
snMspsRadExtAuthClientServerPortNumber Integer32,
snMspsRadExtAuthClientRoundTripTime TimeTicks,
snMspsRadExtAuthClientAccessRequests Counter32,
snMspsRadExtAuthClientAccessRetransmissions Counter32,
snMspsRadExtAuthClientAccessAccepts Counter32,
snMspsRadExtAuthClientAccessRejects Counter32,
snMspsRadExtAuthClientAccessChallenges Counter32,
snMspsRadExtAuthClientMalformedAccessResponses Counter32,
snMspsRadExtAuthClientBadAuthenticators Counter32,
snMspsRadExtAuthClientPendingRequests Gauge32,
snMspsRadExtAuthClientTimeouts Counter32,
snMspsRadExtAuthClientUnknownTypes Counter32,
snMspsRadExtAuthClientPacketsDropped Counter32,
snMspsRadExtAuthServerType INTEGER
}
snMspsRadExtAuthServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number that uniquely idenfifies each RADIUS
Authentication server with which the client
communicates."
::= { snMspsRadExtAuthServerEntry 1 }
snMspsRadExtAuthServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type (IPv4 or IPv6) of the RADIUS authentication
server referred to in the snMspsRadExtAuthServerTable entry."
::= { snMspsRadExtAuthServerEntry 2 }
snMspsRadExtAuthServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address (Ipv4 or Ipv6) of the RADIUS authentication
server referred to in this table entry."
::= { snMspsRadExtAuthServerEntry 3 }
snMspsRadExtAuthClientServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port that the client uses to send requests to
this server."
::= { snMspsRadExtAuthServerEntry 4 }
snMspsRadExtAuthClientRoundTripTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (in hundredths of a second) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that that matches with the
Access-Reply/Access-Challengeit from the RADIUS
authentication server."
::= { snMspsRadExtAuthServerEntry 5 }
-- Request/Response statistics
--
-- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes
--
-- TotalIncomingPackets - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received
--
-- AccessRequests + PendingRequests + ClientTimeouts =
-- Successfully Received
--
--
snMspsRadExtAuthClientAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets sent
to this server. This does not include retransmissions."
::= { snMspsRadExtAuthServerEntry 6 }
snMspsRadExtAuthClientAccessRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets
retransmitted to this RADIUS authentication server."
::= { snMspsRadExtAuthServerEntry 7 }
snMspsRadExtAuthClientAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Accept packets
(valid or invalid) received from this server."
::= { snMspsRadExtAuthServerEntry 8 }
snMspsRadExtAuthClientAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Reject packets
(valid or invalid) received from this server."
::= { snMspsRadExtAuthServerEntry 9 }
snMspsRadExtAuthClientAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Challenge packets
(valid or invalid) received from this server."
::= { snMspsRadExtAuthServerEntry 10 }
-- "Access-Response" includes an Access-Accept, Access-Challenge
-- or Access-Reject
snMspsRadExtAuthClientMalformedAccessResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attributes or unknown types are not
included as malformed access responses."
::= { snMspsRadExtAuthServerEntry 11 }
snMspsRadExtAuthClientBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Response packets
containing invalid authenticators or Signature
attributes received from this server."
::= { snMspsRadExtAuthServerEntry 12 }
snMspsRadExtAuthClientPendingRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Access-Request packets
destined for this server, which have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sent and is decremented due to
receipt of an Access-Accept, Access-Reject or
Access-Challenge, a timeout or retransmission."
::= { snMspsRadExtAuthServerEntry 13 }
snMspsRadExtAuthClientTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication timeouts to this server.
After the entry timeout the client may retry to the same
server, send to a different server, or
give up. Retry to the same server is counted as a
retransmit as well as a timeout. Send to a different
server is counted as a Request as well as a timeout."
::= { snMspsRadExtAuthServerEntry 14 }
snMspsRadExtAuthClientUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets of unknown type, which
were received from this server on the authentication port."
::= { snMspsRadExtAuthServerEntry 15 }
snMspsRadExtAuthClientPacketsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS packets, which were
received from this server on the authentication port
and dropped for some other reason."
::= { snMspsRadExtAuthServerEntry 16 }
snMspsRadExtAuthServerType OBJECT-TYPE
SYNTAX INTEGER { login (1),
pnac (2),
both (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS Authentication server type (login or pnac or Both)."
DEFVAL { both }
::= { snMspsRadExtAuthServerEntry 17 }
snMspsRadAuthorizationMode OBJECT-TYPE
SYNTAX INTEGER
{
standard (1),
vendor-specific (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object used to parse the RADIUS accept/reject packet by standard mode or vendor-specific mode
to get the User Management Access Control (UMAC) value (user privilege) of the user.
standard - derive the function rights (user privilege) by 'SERVICE-TYPE attribute'
vendor-specific - derive the function rights (user privilege) by
'Siemens Vendor Specific Attribute' Vendor-ID (4196) and
Vendor Type (1) 'Siemens-Automation-Privileged-User-Group'."
DEFVAL { standard }
::= { snMspsRadiusServer 10 }
snMspsGuestVlanSystem OBJECT IDENTIFIER ::= { snMspsGuestVlan 1 }
snMspsGuestVlanAddress OBJECT IDENTIFIER ::= { snMspsGuestVlan 2 }
snMspsGuestVlanPort OBJECT IDENTIFIER ::= { snMspsGuestVlan 3 }
-- --------------------------------------------------------------
-- GuestVlanTable Sub-Group
-- --------------------------------------------------------------
snMspsGuestVlanEnable OBJECT-TYPE
SYNTAX INTEGER {
guestVlanEnabled(1),
guestVlanDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable GuestVlan"
DEFVAL { guestVlanDisabled }
::= { snMspsGuestVlanSystem 1}
-- --------------------------------------------------------------
-- GuestVlanAddrTable Sub-Group
-- --------------------------------------------------------------
snMspsGuestVlanAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGuestVlanAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { snMspsGuestVlanAddress 1 }
snMspsGuestVlanAddressEntry OBJECT-TYPE
SYNTAX SnMspsGuestVlanAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { snMspsGuestVlanAddressPort, snMspsGuestVlanAddressMac }
::= {snMspsGuestVlanAddressTable 1}
SnMspsGuestVlanAddressEntry ::=
SEQUENCE {
snMspsGuestVlanAddressMac
MacAddress,
snMspsGuestVlanAddressPort
INTEGER,
snMspsGuestVlanAddressVlan
INTEGER,
snMspsGuestVlanAddressInit
INTEGER
}
snMspsGuestVlanAddressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC address"
::= { snMspsGuestVlanAddressEntry 1 }
snMspsGuestVlanAddressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port-ID that address is authenticated or blocked"
::= { snMspsGuestVlanAddressEntry 2 }
snMspsGuestVlanAddressVlan OBJECT-TYPE
SYNTAX INTEGER (1.. 4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN-ID that address is authenticated or blocked"
::= { snMspsGuestVlanAddressEntry 3 }
snMspsGuestVlanAddressInit OBJECT-TYPE
SYNTAX INTEGER {
guestVlan-MAC-NoAction(1),
guestVlan-MAC-Init(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reinitialization of that mac address"
::= { snMspsGuestVlanAddressEntry 4 }
-- --------------------------------------------------------------
-- GuestVlanPortConfig Sub-Group
-- --------------------------------------------------------------
snMspsGuestVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsGuestVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of ports for which Guest Vlans occurs on."
::= { snMspsGuestVlanPort 1 }
snMspsGuestVlanPortEntry OBJECT-TYPE
SYNTAX SnMspsGuestVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Guest VLan Port entry. "
INDEX { snMspsGuestVlanPortIfIndex }
::= { snMspsGuestVlanPortTable 1 }
SnMspsGuestVlanPortEntry ::= SEQUENCE {
snMspsGuestVlanPortIfIndex INTEGER,
snMspsGuestVlanPortEnable INTEGER,
snMspsGuestVlanPortVid INTEGER,
snMspsGuestVlanPortMaxAddresses INTEGER,
snMspsGuestVlanPortActAddresses INTEGER,
snMspsGuestVlanPortInit INTEGER
}
snMspsGuestVlanPortIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which Guest Vlans occurs on."
::= { snMspsGuestVlanPortEntry 1 }
snMspsGuestVlanPortEnable OBJECT-TYPE
SYNTAX INTEGER {
guestVlanPortEnabled(1),
guestVlanPortDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enables GuestVlan on that port"
DEFVAL { guestVlanPortDisabled}
::= { snMspsGuestVlanPortEntry 2 }
snMspsGuestVlanPortVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Guest VLAN-Id of that port"
DEFVAL { 1 }
::= { snMspsGuestVlanPortEntry 3 }
snMspsGuestVlanPortMaxAddresses OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "max number of addresses the could be activated in guest VLAN in parallel on that port"
DEFVAL { 1 }
::= { snMspsGuestVlanPortEntry 4 }
snMspsGuestVlanPortActAddresses OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of addresses that are actually activated in guest VLAN on that port"
::= { snMspsGuestVlanPortEntry 5 }
snMspsGuestVlanPortInit OBJECT-TYPE
SYNTAX INTEGER {
guestVlanNoAction(1),
guestVlanPortInit(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reinitialization of all addresses activated in guest VLAN on that port"
DEFVAL { guestVlanNoAction }
::= { snMspsGuestVlanPortEntry 6 }
snMspsMacAuthSystem OBJECT IDENTIFIER ::= { snMspsMacAuth 1 }
snMspsMacAuthAddress OBJECT IDENTIFIER ::= { snMspsMacAuth 2 }
snMspsMacAuthPort OBJECT IDENTIFIER ::= { snMspsMacAuth 3 }
-- --------------------------------------------------------------
-- MacAuthTable Sub-Group
-- --------------------------------------------------------------
snMspsMacAuthEnable OBJECT-TYPE
SYNTAX INTEGER {
macAuthEnabled(1),
macAuthDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable MAC authentication"
DEFVAL { macAuthDisabled }
::= { snMspsMacAuthSystem 1}
-- --------------------------------------------------------------
-- MacAuthAddrTable Sub-Group
-- --------------------------------------------------------------
snMspsMacAuthAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMacAuthAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { snMspsMacAuthAddress 1 }
snMspsMacAuthAddressEntry OBJECT-TYPE
SYNTAX SnMspsMacAuthAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { snMspsMacAuthAddressPort, snMspsMacAuthAddressMac }
::= {snMspsMacAuthAddressTable 1}
SnMspsMacAuthAddressEntry ::=
SEQUENCE {
snMspsMacAuthAddressMac
MacAddress,
snMspsMacAuthAddressPort
INTEGER,
snMspsMacAuthAddressVlan
INTEGER,
snMspsMacAuthAddressState
INTEGER,
snMspsMacAuthAddressReAuth
INTEGER
}
snMspsMacAuthAddressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC address"
::= { snMspsMacAuthAddressEntry 1 }
snMspsMacAuthAddressPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port-ID that address is authenticated or blocked"
::= { snMspsMacAuthAddressEntry 2 }
snMspsMacAuthAddressVlan OBJECT-TYPE
SYNTAX INTEGER (1.. 4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN-ID that address is authenticated or blocked"
::= { snMspsMacAuthAddressEntry 3 }
snMspsMacAuthAddressState OBJECT-TYPE
SYNTAX INTEGER {
macAuthMACAuthenticated(1),
macAuthMACNotAuthenticated(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates wether address is authenticated or blocked"
::= { snMspsMacAuthAddressEntry 4 }
snMspsMacAuthAddressReAuth OBJECT-TYPE
SYNTAX INTEGER {
macAuthMACNoAction(1),
macAuthMACReAuth(2),
macAuthMACInit(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reauthentication of that mac address. The value of this object
has only an effect if independant Reauthentication for MAC-Authentication
is supported by the device."
::= { snMspsMacAuthAddressEntry 5 }
-- --------------------------------------------------------------
-- MacAuthPortConfig Sub-Group
-- --------------------------------------------------------------
snMspsMacAuthPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMacAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of ports for which MAC Authentication occurs on."
::= { snMspsMacAuthPort 1 }
snMspsMacAuthPortEntry OBJECT-TYPE
SYNTAX SnMspsMacAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC Authentication Port entry. "
INDEX { snMspsMacAuthPortIfIndex }
::= { snMspsMacAuthPortTable 1 }
SnMspsMacAuthPortEntry ::= SEQUENCE {
snMspsMacAuthPortIfIndex INTEGER,
snMspsMacAuthPortEnable INTEGER,
snMspsMacAuthPortReAuth INTEGER,
snMspsMacAuthPortReAuthTimeout INTEGER,
snMspsMacAuthPortMaxAddresses INTEGER,
snMspsMacAuthPortVlanAssignment INTEGER,
snMspsMacAuthPortQuietTime INTEGER,
snMspsMacAuthPortActAddressesAuth INTEGER,
snMspsMacAuthPortActAddressesBlocked INTEGER,
snMspsMacAuthPortReAuthenticateStart INTEGER,
snMspsMacAuthPortEnableOnlyOnDot1xTimeout INTEGER
}
snMspsMacAuthPortIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which MAC Authentication occurs on."
::= { snMspsMacAuthPortEntry 1 }
snMspsMacAuthPortEnable OBJECT-TYPE
SYNTAX INTEGER {
macAuthPortEnabled(1),
macAuthPortDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enables MAC authentication on that port"
DEFVAL { macAuthPortDisabled}
::= { snMspsMacAuthPortEntry 2 }
snMspsMacAuthPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
macAuthReAuthEnabled(1),
macAuthReAuthDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reauthentication enabled/disabled on that port.
The value of this object has only an effect if
independant Reauthentication for MAC-Authentication is supported by the device."
DEFVAL { 1 }
::= { snMspsMacAuthPortEntry 3 }
snMspsMacAuthPortReAuthTimeout OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for automatic reauthentication.
The value of this object has only an effect if
independant Reauthentication for MAC-Authentication is supported by the device"
DEFVAL { 0 }
::= { snMspsMacAuthPortEntry 4 }
snMspsMacAuthPortMaxAddresses OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "max number of addresses the could be authenticated in parallel on that port,
configuration as 0 means after first successful mac authentication port is opened for all traffic"
DEFVAL { 1 }
::= { snMspsMacAuthPortEntry 5 }
snMspsMacAuthPortVlanAssignment OBJECT-TYPE
SYNTAX INTEGER {
macAuthVlanAssignEnabled(1),
macAuthVlanAssignDisabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The RADIUS server is allowed to assign VLANs on ports for authenticated addresses"
DEFVAL { macAuthVlanAssignDisabled }
::= { snMspsMacAuthPortEntry 6 }
snMspsMacAuthPortQuietTime OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mininmal time between RADIUS server requests for the same address on that port.
The value of this object has only an effect if independant
Reauthentication for MAC-Authentication is supported by the device"
DEFVAL { 10 }
::= { snMspsMacAuthPortEntry 7 }
snMspsMacAuthPortActAddressesAuth OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of addresses that are actually authenticated on that port"
::= { snMspsMacAuthPortEntry 8 }
snMspsMacAuthPortActAddressesBlocked OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "number of addresses that are actually blocked on that port"
::= { snMspsMacAuthPortEntry 9 }
snMspsMacAuthPortReAuthenticateStart OBJECT-TYPE
SYNTAX INTEGER {
macAuthNoAction(1),
macAuthPortReAuthenticate(2),
macAuthPortReInit(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reauthenticate all authenticated addresses on that port or cleanup all address information.
The value of this object has only an effect if independant
Reauthentication for MAC-Authentication is supported by the device"
DEFVAL { macAuthNoAction }
::= { snMspsMacAuthPortEntry 10 }
snMspsMacAuthPortEnableOnlyOnDot1xTimeout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enables MAC authentication on that port, when dot1x is timed out (or) on max retransmission."
DEFVAL { disabled }
::= { snMspsMacAuthPortEntry 11 }
snMspsSinemaInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
paramactive(1),
newparamloaded(2),
activatingloadedparam(3),
activatingoriginalparam(4),
loadedparamactive(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "diagnose object for SINEMA interface state. It can be set to (1) Parameters Active,
(2) New Parameters Loaded, (3) Activating Loaded Parameters , (4) Activating Original Parameters,
(5) Loaded Parameters Active"
DEFVAL { paramactive }
::= { snMspsSinema 1 }
snMspsSinemaAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling / disabling availability of SCALANCE configuration interface"
::= { snMspsSinema 2 }
snMspsSinemaResult OBJECT-TYPE
SYNTAX INTEGER {
loadSuccess(1),
loadWrongState(2),
loadIllegalPackagetype(3),
loadTargetDeviceMismatch(4),
loadNotEnoughResources(5),
loadCoordinationError(6),
loadAlreadyRunningError(7),
loadNoAccess(8),
activateSuccess(9),
activateWrongState(10),
activateCoordinationError(11),
activateNotEnoughResources(12),
activateError(13),
activateNoAccess(14),
statusNotEnoughResources(15),
statusNothingLoaded(16),
statusNoAccess(17),
readSuccess(18),
readInstanceDataNotLoaded(19),
readNotEnoughResources(20),
readNoAccess(21),
acceptSuccess(22),
acceptNotEnoughResources(23),
acceptWrongState(24),
acceptNoAccess(25),
rollbackSuccess(26),
rollbackNotEnoughResources(27),
rollbackWrongState(28),
rollbackNoAccess(29)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Result of Configuration Event (CE) received from Sinema"
::= { snMspsSinema 3 }
snMspsSinemaErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
noError(0),
tooBig(1),
noSuchName(2),
badValue(3),
readOnly(4),
genErr(5),
noAccess(6),
wrongType(7),
wrongLength(8),
wrongEncoding(9),
wrongValue(10),
noCreation(11),
inconsistentValue(12),
resourceUnavailable(13),
commitFailed(14),
undoFailed(15),
authorizationError(16),
notWritable(17),
inconsistentName(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the error received with respect to position of SNMP variables in TLV package"
::= { snMspsSinema 4 }
snMspsSinemaErrorIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Location of the error received with respect to position of SNMP variables in TLV package"
::= { snMspsSinema 5 }
snMspsMstSystemControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative shutdown status requested by management for the MST
feature. The value start (1) indicates that MST should be active in
the device on all ports. The value shutdown (2) indicates that MST
should be shutdown in the device on all ports. All memory should
be released on all ports."
::= { snMspsMstp 1 }
-- snMspsMstp 2-3 reserved
snMspsMstModuleStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMstSystemControl set to start."
::= { snMspsMstp 4 }
snMspsMstMaxMstInstanceNumber OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximun number of spanning trees to be allowed. An user may limit
the number of Spanning Tree instances to be allowed in the Bridge.
The value reflects the max number of active MSTIs that can be created.
It does not include the special MSTID, the PTETID, used to identify
VIDs used by Ethernet Switched Paths (ESPs)."
::= { snMspsMstp 5 }
snMspsMstNoOfMstiSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates Maximum number of spanning tree Instances supported."
::= { snMspsMstp 6 }
snMspsMstMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Maximum Hop Count value. One-hundredth of the
configured value will be set as Max Hop Count.
An agent may return a badValue error if a set is attempted
to a value which is not a multiples of hundred."
DEFVAL { 2000 }
::= { snMspsMstp 7 }
snMspsMstBrgAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with snMspsMstCistBridgePriority or
snMspsMstMstiBridgePriority a unique BridgeIdentifier
is formed which is used in the Spanning Tree Protocol."
::= { snMspsMstp 8 }
snMspsMstCistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { snMspsMstp 9 }
snMspsMstCistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { snMspsMstp 10 }
snMspsMstCistRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Root as seen
from this bridge."
::= { snMspsMstp 11 }
snMspsMstCistRegionalRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root
as seen from this bridge."
::= { snMspsMstp 12 }
snMspsMstCistRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge."
::= { snMspsMstp 13 }
snMspsMstCistBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { snMspsMstp 14 }
snMspsMstCistBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {2000}
::= { snMspsMstp 15 }
snMspsMstCistBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {1500}
::= { snMspsMstp 16 }
snMspsMstCistHoldTime OBJECT-TYPE
SYNTAX Integer32
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { snMspsMstp 17 }
snMspsMstCistMaxAge OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
::= { snMspsMstp 18 }
snMspsMstCistForwardDelay OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state."
::= { snMspsMstp 19 }
snMspsMstMstpUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times MSTP Module has been enabled."
::= { snMspsMstp 20 }
snMspsMstMstpDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times MSTP Module has been disabled."
::= { snMspsMstp 21 }
-- snMspsMstp 22-24 reserved
snMspsMstForceProtocolVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s."
DEFVAL { mstp }
::= { snMspsMstp 25 }
snMspsMstTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
DEFVAL { 3 }
::= { snMspsMstp 26 }
snMspsMstMstiConfigIdSel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Configuration Identifier Format Selector used
by the Bridge. This has a fixed value of 0 to indicate
RegionName, RegionVersion are specified as in Standard."
::= { snMspsMstp 27 }
snMspsMstMstiRegionName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address."
::= { snMspsMstp 28 }
snMspsMstMstiRegionVersion OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { snMspsMstp 29 }
snMspsMstMstiConfigDigest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Configuration Digest value for this Region."
::= { snMspsMstp 30 }
snMspsMstBufferOverFlowCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Buffer overflows/failures have occured.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 31 }
snMspsMstMemAllocFailureCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times memory allocation failures have occured.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 32 }
snMspsMstRegionConfigChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a Region Configuration Identifier Change
was detected.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 33 }
snMspsMstCistBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
of this bridge in Common Spanning Tree context"
::= { snMspsMstp 34 }
snMspsMstCistTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for Common Spanning Tree context."
::= { snMspsMstp 35 }
snMspsMstCistTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for Common
Spanning Tree context."
::= { snMspsMstp 36 }
snMspsMstCistNewRootBridgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for Common Spanning Tree context.
A Trap is generated on the occurence of this event."
::= { snMspsMstp 37 }
snMspsMstCistHelloTime OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, specifies the amount of time between
the transmission of configuration BPDUs by this node
on any port when it is the root of the spanning tree
or trying to become so."
::= { snMspsMstp 38 }
snMspsMstCistBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..200)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { snMspsMstp 39 }
snMspsMstRstpPlusStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status requested by management for the RSTP+
Module. This enables or disables RSTP+ feature in the system.
A value of 'enabled' (1) indicates that RSTP+ feature is enabled
in the device. A value of 'disabled'(2) indicates that RSTP+ feature
is disabled in the device. This feature can be enabled only
if the device supports RSTP+ feature, otherwise it returns wrong value."
DEFVAL {disabled}
::= { snMspsMstp 40 }
snMspsMstRstpPlusMrpInterconDomainId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents RstpPlus MRP Interconnection domain Id for
the RSTP and MRP ring coupling, which is equivalent to
MRP Interconnection domain Id 'snMspsMrpInterconDomainID'.
It returns inconsistency value, if the id is already configured
as a MRP Interconnection Id in the device. It should be unambiguous
with 'snMspsMrpInterconDomainID' and 'snMspsMstRstpPlusMrpInterconDomainId'
in the entire topology. This can be configurable only if the device
supports RSTP+ feature, otherwise it returns wrong value.
If the device not supports RSTP+ feature, get of this object returns default value.
This object is valid and effect only if 'snMspsMstRstpPlusStatus' is 'enabled'.
Valid value should be configured to enable 'snMspsMstRstpPlusStatus'."
DEFVAL { 1 }
::= { snMspsMstp 41 }
-- snMspsMstp 42-44 reserved
snMspsMstCistDynamicPathcostCalculation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed(when the operational status of the port changes
from down to up), otherwise the link speed at the time of port
creation is used for calculating the path cost. In both cases
if the user has configured a pathcost for the port that will be
used. By default dynamic pathcost calculation is set to false."
DEFVAL { false }
::= { snMspsMstp 45 }
snMspsMstCalcPortPathCostOnSpeedChg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to determine whether dynamic pathcost
calculation is done for a port for which Port Speed is changing
dynamically. This is mainly intended for Link Aggregated ports where
depening on Active ports speed of Link aggregated port changes.
By default dynamic pathcost calculation on change in speed is set to
false."
DEFVAL { false }
::= { snMspsMstp 46 }
-- -----------------------------------------------------------------
-- Mst VlanId to Instance Mapping Table
-- -----------------------------------------------------------------
snMspsMstVlanInstanceMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstVlanInstanceMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each instance of MSTP."
::= { snMspsMstp 47 }
snMspsMstVlanInstanceMappingEntry OBJECT-TYPE
SYNTAX SnMspsMstVlanInstanceMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the status of the MSTP instance."
INDEX { snMspsMstInstanceIndex }
::= { snMspsMstVlanInstanceMappingTable 1 }
SnMspsMstVlanInstanceMappingEntry ::=
SEQUENCE {
snMspsMstInstanceIndex
Integer32,
snMspsMstMapVlanIndex
VlanId,
snMspsMstUnMapVlanIndex
VlanId,
snMspsMstSetVlanList
OCTET STRING,
snMspsMstResetVlanList
OCTET STRING,
snMspsMstInstanceVlanMapped
OCTET STRING,
snMspsMstInstanceVlanMapped2k
OCTET STRING,
snMspsMstInstanceVlanMapped3k
OCTET STRING,
snMspsMstInstanceVlanMapped4k
OCTET STRING
}
snMspsMstInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..64|4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance. In
a Bridge that supports PBB-TE, the special MSTID of 4094, the
PTETID, identifies VIDs that can be used by Ethernet Switched
Paths (ESPs). ESPs are provisioned seperately by any external agent
and do not use spanning tree."
::= { snMspsMstVlanInstanceMappingEntry 1 }
snMspsMstMapVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VlanId will get mapped to the spanning tree instance
specified. All the Instance Specific information for the
Member ports of the Vlan will be created.This object is
used only for SET operation.GET Operation returns null values.
If the VlanId to Instance Mapping has to be known then any
one of the VlanMapped object should be used."
::= { snMspsMstVlanInstanceMappingEntry 2 }
snMspsMstUnMapVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VlanId will get unmapped from spanning tree instance
to which it it mapped. All the Instance Specific information
for the Member ports of the Vlan will get released.This object
is used only for SET operation.GET Operation returns null values."
::= { snMspsMstVlanInstanceMappingEntry 3 }
snMspsMstSetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { snMspsMstVlanInstanceMappingEntry 4 }
snMspsMstResetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values."
::= { snMspsMstVlanInstanceMappingEntry 5 }
snMspsMstInstanceVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { snMspsMstVlanInstanceMappingEntry 6 }
snMspsMstInstanceVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048. The
first octet corresponds to VLANs with VlanIndex values
1025 through 1032; the second octet to VLANs 1033
through 1040 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { snMspsMstVlanInstanceMappingEntry 7 }
snMspsMstInstanceVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072. The
first octet corresponds to VLANs with VlanIndex values
of 2049 through 2056; the second octet to VLANs 2057
through 2064 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { snMspsMstVlanInstanceMappingEntry 8 }
snMspsMstInstanceVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3073 through 3080; the second octet to VLANs 3081
through 3088 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { snMspsMstVlanInstanceMappingEntry 9 }
-- -----------------------------------------------------------------
-- END OF Mst VlanId to Instance Mapping Table
-- -----------------------------------------------------------------
snMspsMstSetTraps OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable specific
MSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - General Traps like protocol up or down
2 - Exception Traps like memory failure or buffer failure
or port protocol migration or invalid packet rcvd in port
3 - All the above Traps "
::= { snMspsMstp 48 }
snMspsMstGenTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The general events like
none - none of the below values
up - protocol UP,
down - protocol DOWN"
::= { snMspsMstp 49 }
-- snMspsMstp 50-59 reserved
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
snMspsMstMstiBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance."
::= { snMspsMstp 60 }
snMspsMstMstiBridgeEntry OBJECT-TYPE
SYNTAX SnMspsMstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { snMspsMstMstiInstanceIndex }
::= { snMspsMstMstiBridgeTable 1 }
SnMspsMstMstiBridgeEntry ::=
SEQUENCE {
snMspsMstMstiInstanceIndex
Integer32,
snMspsMstMstiBridgeRegionalRoot
BridgeId,
snMspsMstMstiBridgePriority
Integer32,
snMspsMstMstiRootCost
Integer32,
snMspsMstMstiRootPort
Integer32,
snMspsMstMstiTimeSinceTopologyChange
TimeTicks,
snMspsMstMstiTopChanges
Counter32,
snMspsMstMstiNewRootBridgeCount
Counter32,
snMspsMstMstiBridgeRoleSelectionSemState
INTEGER,
snMspsMstInstanceUpCount
Counter32,
snMspsMstInstanceDownCount
Counter32,
snMspsMstOldDesignatedRoot
BridgeId
}
snMspsMstMstiInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..64|4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs.
The special MSTID of 4094, known as the PTETID, identifies VIDs
that are used by Ethernet Switched Paths (ESPs)."
::= { snMspsMstMstiBridgeEntry 1 }
snMspsMstMstiBridgeRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this node"
::= { snMspsMstMstiBridgeEntry 2 }
snMspsMstMstiBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { snMspsMstMstiBridgeEntry 3 }
snMspsMstMstiRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the MSTI Regional Root as seen
by this bridge."
::= { snMspsMstMstiBridgeEntry 4 }
snMspsMstMstiRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the MSTI Region Root Bridge."
::= { snMspsMstMstiBridgeEntry 5 }
snMspsMstMstiTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for this spanning tree instance."
::= { snMspsMstMstiBridgeEntry 6 }
snMspsMstMstiTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance."
::= { snMspsMstMstiBridgeEntry 7 }
snMspsMstMstiNewRootBridgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for this spanning tree instance.
A Trap is generated on the occurence of this event."
::= { snMspsMstMstiBridgeEntry 8 }
snMspsMstMstiBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
for this spanning tree instance for this bridge."
::= { snMspsMstMstiBridgeEntry 9 }
snMspsMstInstanceUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new spanning tree instance has
been created.
A Trap is generated on the occurence of this event."
::= { snMspsMstMstiBridgeEntry 10 }
snMspsMstInstanceDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a spanning tree instance has
been deleted.
A Trap is generated on the occurence of this event."
::= { snMspsMstMstiBridgeEntry 11 }
snMspsMstOldDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node. "
::= { snMspsMstMstiBridgeEntry 12 }
-- -----------------------------------------------------------------
-- END OF Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
-- snMspsMstp 61-62 reserved
-- -----------------------------------------------------------------
-- Mst Common Spanning Tree Port Table
-- -----------------------------------------------------------------
snMspsMstCistPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { snMspsMstp 63 }
snMspsMstCistPortEntry OBJECT-TYPE
SYNTAX SnMspsMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { snMspsMstCistPort }
::= { snMspsMstCistPortTable 1 }
SnMspsMstCistPortEntry ::=
SEQUENCE {
snMspsMstCistPort
Integer32,
snMspsMstCistPortPathCost
Integer32,
snMspsMstCistPortPriority
Integer32,
snMspsMstCistPortDesignatedRoot
BridgeId,
snMspsMstCistPortDesignatedBridge
BridgeId,
snMspsMstCistPortDesignatedPort
OCTET STRING,
snMspsMstCistPortAdminP2P
INTEGER,
snMspsMstCistPortOperP2P
TruthValue,
snMspsMstCistPortAdminEdgeStatus
TruthValue,
snMspsMstCistPortOperEdgeStatus
TruthValue,
snMspsMstCistPortProtocolMigration
TruthValue,
snMspsMstCistPortState
INTEGER,
snMspsMstCistForcePortState
INTEGER,
snMspsMstCistPortForwardTransitions
Counter32,
snMspsMstCistPortRxMstBpduCount
Counter32,
snMspsMstCistPortRxRstBpduCount
Counter32,
snMspsMstCistPortRxConfigBpduCount
Counter32,
snMspsMstCistPortRxTcnBpduCount
Counter32,
snMspsMstCistPortTxMstBpduCount
Counter32,
snMspsMstCistPortTxRstBpduCount
Counter32,
snMspsMstCistPortTxConfigBpduCount
Counter32,
snMspsMstCistPortTxTcnBpduCount
Counter32,
snMspsMstCistPortInvalidMstBpduRxCount
Counter32,
snMspsMstCistPortInvalidRstBpduRxCount
Counter32,
snMspsMstCistPortInvalidConfigBpduRxCount
Counter32,
snMspsMstCistPortInvalidTcnBpduRxCount
Counter32,
snMspsMstCistPortTransmitSemState
INTEGER,
snMspsMstCistPortReceiveSemState
INTEGER,
snMspsMstCistPortProtMigrationSemState
INTEGER,
snMspsMstCistProtocolMigrationCount
Counter32,
snMspsMstCistPortDesignatedCost
Integer32,
snMspsMstCistPortRegionalRoot
BridgeId,
snMspsMstCistPortRegionalPathCost
Integer32,
snMspsMstCistSelectedPortRole
INTEGER,
snMspsMstCistCurrentPortRole
INTEGER,
snMspsMstCistPortInfoSemState
INTEGER,
snMspsMstCistPortRoleTransitionSemState
INTEGER,
snMspsMstCistPortStateTransitionSemState
INTEGER,
snMspsMstCistPortTopologyChangeSemState
INTEGER,
snMspsMstCistPortHelloTime
Timeout,
snMspsMstCistPortOperVersion
INTEGER,
snMspsMstCistPortEffectivePortState
TruthValue,
snMspsMstCistPortAutoEdgeStatus
TruthValue,
snMspsMstCistPortRestrictedRole
TruthValue,
snMspsMstCistPortRestrictedTCN
TruthValue,
snMspsMstCistPortAdminPathCost
Integer32,
snMspsMstCistPortEnableBPDURx
TruthValue,
snMspsMstCistPortEnableBPDUTx
TruthValue,
snMspsMstCistPortPseudoRootId
BridgeId,
snMspsMstCistPortIsL2Gp
TruthValue,
snMspsMstCistPortLoopGuard
TruthValue,
snMspsMstCistPortLimitedTCN
TruthValue
}
snMspsMstCistPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { snMspsMstCistPortEntry 1 }
snMspsMstCistPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the CIST Root which include this port."
::= { snMspsMstCistPortEntry 2 }
snMspsMstCistPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { snMspsMstCistPortEntry 3 }
snMspsMstCistPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted."
::= { snMspsMstCistPortEntry 4 }
snMspsMstCistPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { snMspsMstCistPortEntry 5 }
snMspsMstCistPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { snMspsMstCistPortEntry 6 }
snMspsMstCistPortAdminP2P OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { snMspsMstCistPortEntry 7 }
snMspsMstCistPortOperP2P OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the snMspsMstCistPortAdminP2P object."
::= { snMspsMstCistPortEntry 8 }
snMspsMstCistPortAdminEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
::= { snMspsMstCistPortEntry 9 }
snMspsMstCistPortOperEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
snMspsMstCistPortAdminEdgeStatus and is set FALSE on reception
of a BPDU."
DEFVAL { false }
::= { snMspsMstCistPortEntry 10 }
snMspsMstCistPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the protocol migration state event
machine variable 'mcheck' for this port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
DEFVAL { false }
::= { snMspsMstCistPortEntry 11 }
snMspsMstCistPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { snMspsMstCistPortEntry 12 }
snMspsMstCistForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts"
::= { snMspsMstCistPortEntry 13 }
snMspsMstCistPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this port has transitioned to the
Forwarding State."
::= { snMspsMstCistPortEntry 14 }
snMspsMstCistPortRxMstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST BPDUs received on this port."
::= { snMspsMstCistPortEntry 15 }
snMspsMstCistPortRxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RST BPDUs received on this port."
::= { snMspsMstCistPortEntry 16 }
snMspsMstCistPortRxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs received on this port."
::= { snMspsMstCistPortEntry 17 }
snMspsMstCistPortRxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs received on this port."
::= { snMspsMstCistPortEntry 18 }
snMspsMstCistPortTxMstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 19 }
snMspsMstCistPortTxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RST BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 20 }
snMspsMstCistPortTxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 21 }
snMspsMstCistPortTxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs Transmitted from this port."
::= { snMspsMstCistPortEntry 22 }
snMspsMstCistPortInvalidMstBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid MST BPDUs Received on this port."
::= { snMspsMstCistPortEntry 23 }
snMspsMstCistPortInvalidRstBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid RST BPDUs Received on this port."
::= { snMspsMstCistPortEntry 24 }
snMspsMstCistPortInvalidConfigBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid Configuration BPDUs Received on this port."
::= { snMspsMstCistPortEntry 25 }
snMspsMstCistPortInvalidTcnBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid TCN BPDUs Received on this port."
::= { snMspsMstCistPortEntry 26 }
snMspsMstCistPortTransmitSemState OBJECT-TYPE
SYNTAX INTEGER {
transmitinit (0),
transmitperiodic (1),
transmitconfig (2),
transmittcn (3),
transmitrstp (4),
idle (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Transmit state machine."
::= { snMspsMstCistPortEntry 27 }
snMspsMstCistPortReceiveSemState OBJECT-TYPE
SYNTAX INTEGER {
discard (0),
receive (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Receive state machine."
::= { snMspsMstCistPortEntry 28 }
snMspsMstCistPortProtMigrationSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
sendrstp (1),
sendingrstp (2),
sendstp (3),
sendingstp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Protocol Migration
State machine."
::= { snMspsMstCistPortEntry 29 }
snMspsMstCistProtocolMigrationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and
RSTP/MSTP.
A Trap is generated on the occurence of this event."
::= { snMspsMstCistPortEntry 30 }
snMspsMstCistPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { snMspsMstCistPortEntry 31 }
snMspsMstCistPortRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Regional Root Identifier in the configuration BPDUs
transmitted."
::= { snMspsMstCistPortEntry 32 }
snMspsMstCistPortRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths
towards the CIST Regional Root which include this port."
::= { snMspsMstCistPortEntry 33 }
snMspsMstCistSelectedPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning
tree instance."
::= { snMspsMstCistPortEntry 34 }
snMspsMstCistCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
rstpPlus(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance. It returns role 'rstpPlus',
if the port is ring port and spanning tree is enabled
on this port."
::= { snMspsMstCistPortEntry 35 }
snMspsMstCistPortInfoSemState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
aged (1),
update (2),
superiordesg (3),
repeatdesg (4),
inferiordesg (5),
notdesg (6),
present (7),
receive (8),
other (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Information State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 36 }
snMspsMstCistPortRoleTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
disableport (1),
disabledport (2),
rootport (3),
designatedport (4),
alternateport (5),
masterport (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 37 }
snMspsMstCistPortStateTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port State Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 38 }
snMspsMstCistPortTopologyChangeSemState OBJECT-TYPE
SYNTAX INTEGER {
inactive (0),
learning (1),
detected (2),
active (3),
notifiedtcn (4),
notifiedtc (5),
propagating (6),
acknowledged (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Topology Change State Machine
for this port in this spanning tree context."
::= { snMspsMstCistPortEntry 39 }
snMspsMstCistPortHelloTime OBJECT-TYPE
SYNTAX Timeout (100..200)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on this port
in units of hundredths of a second."
::= { snMspsMstCistPortEntry 40 }
snMspsMstCistPortOperVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates whether the Port is operationally in the Mstp
mode, Rstp mode or the Stp-compatible mode i.e., whether the
Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs."
::= { snMspsMstCistPortEntry 41 }
snMspsMstCistPortEffectivePortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The effective operational state of the port for CIST. This will
TRUE only when the port is operationally up in the Interface level
and Protocol level for CIST. This is will be set to False for all
other times."
::= { snMspsMstCistPortEntry 42 }
snMspsMstCistPortAutoEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter when TRUE(1) indicates that detection
of a port as Edge Port happens automatically
and FALSE(2) indicates that this feature is disabled."
::= { snMspsMstCistPortEntry 43 }
snMspsMstCistPortRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'."
::= {snMspsMstCistPortEntry 44}
snMspsMstCistPortRestrictedTCN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC_Operational for the attached LANs transitions frequently."
::= {snMspsMstCistPortEntry 45}
snMspsMstCistPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost or
dot1dStpPortPathCost32, which returns the operational value
of the path cost."
::= { snMspsMstCistPortEntry 46}
snMspsMstCistPortEnableBPDURx OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If FALSE, the BPDUs received on
the port are ignored."
REFERENCE "IEEE802.1ah - 13.25.18"
DEFVAL { true }
::= { snMspsMstCistPortEntry 47 }
snMspsMstCistPortEnableBPDUTx OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If FALSE, no BPDUs are transmitted
by this port. This variable should be FALSE before configuring port
as a Layer Two Gateway Port."
REFERENCE "IEEE802.1ah - 13.25.19"
DEFVAL { true }
::= { snMspsMstCistPortEntry 48 }
snMspsMstCistPortPseudoRootId OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In MSTP Bridge, the snMspsMstCistPortPseudoRootId parameter value
by default, it is set to the BridgeIdentifier. The pseudoRootId
is used by Layer Two Gateway Port as the RootId in generated BPDUs."
REFERENCE "IEEE802.1ah - 13.25.20"
::= { snMspsMstCistPortEntry 49 }
snMspsMstCistPortIsL2Gp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE, then port is functioning
as a Layer Two Gateway Port. The snMspsMstCistPortEnableBPDUTx should be
FALSE to set snMspsMstCistPortIsL2Gp to TRUE."
REFERENCE "IEEE802.1ah - 13.25.21"
DEFVAL { false }
::= { snMspsMstCistPortEntry 50 }
snMspsMstCistPortLoopGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE, then it will not age out
the information even if the peer does not send information. If the port
continues to receive information through BPDUs the operation
on this port will be normal. This will be useful when the neighbor
bridge is faulty, i.e. it cannot send BPDUs but continues to send data
traffic."
DEFVAL { false }
::= { snMspsMstCistPortEntry 51 }
snMspsMstCistPortLimitedTCN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RSTP+ both the received and the detected (self-produced) TCs are accepted
but not forwarded. It comes into effect only if RSTP+ feature is enabled and
snMspsMstCistPortRestrictedTCN is set to FALSE."
DEFVAL { false }
::= { snMspsMstCistPortEntry 52 }
-- -----------------------------------------------------------------
-- END OF Mst Common Spanning Tree Port Table
-- -----------------------------------------------------------------
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table
-- -----------------------------------------------------------------
snMspsMstMstiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Spanning Tree Instance Specific Port
Information."
::= { snMspsMstp 64 }
snMspsMstMstiPortEntry OBJECT-TYPE
SYNTAX SnMspsMstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for each
and every spanning tree instance."
INDEX { snMspsMstMstiPort, snMspsMstInstanceIndex }
::= { snMspsMstMstiPortTable 1 }
SnMspsMstMstiPortEntry ::=
SEQUENCE {
snMspsMstMstiPort
Integer32,
snMspsMstMstiPortPathCost
Integer32,
snMspsMstMstiPortPriority
Integer32,
snMspsMstMstiPortDesignatedRoot
BridgeId,
snMspsMstMstiPortDesignatedBridge
BridgeId,
snMspsMstMstiPortDesignatedPort
OCTET STRING,
snMspsMstMstiPortState
INTEGER,
snMspsMstMstiForcePortState
INTEGER,
snMspsMstMstiPortForwardTransitions
Counter32,
snMspsMstMstiPortReceivedBPDUs
Counter32,
snMspsMstMstiPortTransmittedBPDUs
Counter32,
snMspsMstMstiPortInvalidBPDUsRcvd
Counter32,
snMspsMstMstiPortDesignatedCost
Integer32,
snMspsMstMstiSelectedPortRole
INTEGER,
snMspsMstMstiCurrentPortRole
INTEGER,
snMspsMstMstiPortInfoSemState
INTEGER,
snMspsMstMstiPortRoleTransitionSemState
INTEGER,
snMspsMstMstiPortStateTransitionSemState
INTEGER,
snMspsMstMstiPortTopologyChangeSemState
INTEGER,
snMspsMstMstiPortEffectivePortState
TruthValue,
snMspsMstMstiPortAdminPathCost
Integer32,
snMspsMstMstiPortPseudoRootId
BridgeId
}
snMspsMstMstiPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { snMspsMstMstiPortEntry 1 }
snMspsMstMstiPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { snMspsMstMstiPortEntry 2 }
snMspsMstMstiPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { snMspsMstMstiPortEntry 3 }
snMspsMstMstiPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted."
::= { snMspsMstMstiPortEntry 4 }
snMspsMstMstiPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { snMspsMstMstiPortEntry 5 }
snMspsMstMstiPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { snMspsMstMstiPortEntry 6 }
snMspsMstMstiPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance."
::= { snMspsMstMstiPortEntry 7 }
snMspsMstMstiForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'snMspsMstCistForcePortState' is set to 'enabled' for this port"
::= { snMspsMstMstiPortEntry 8 }
snMspsMstMstiPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this port has transitioned to the
Forwarding State for specific instance."
::= { snMspsMstMstiPortEntry 9 }
snMspsMstMstiPortReceivedBPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDUs received by this port for this
spanning tree instance."
::= { snMspsMstMstiPortEntry 10 }
snMspsMstMstiPortTransmittedBPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDUs transmitted on this port for
this spanning tree instance."
::= { snMspsMstMstiPortEntry 11 }
snMspsMstMstiPortInvalidBPDUsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid BPDUs received on this Port
for this spanning tree instance."
::= { snMspsMstMstiPortEntry 12 }
snMspsMstMstiPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { snMspsMstMstiPortEntry 13 }
snMspsMstMstiSelectedPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning
tree instance."
::= { snMspsMstMstiPortEntry 14 }
snMspsMstMstiCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { snMspsMstMstiPortEntry 15 }
snMspsMstMstiPortInfoSemState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
aged (1),
update (2),
superiordesg (3),
repeatdesg (4),
inferiordesg (5),
notdesg (6),
present (7),
receive (8),
other (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Information State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 16 }
snMspsMstMstiPortRoleTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
disableport (1),
disabledport (2),
rootport (3),
designatedport (4),
alternateport (5),
masterport (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 17 }
snMspsMstMstiPortStateTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port State Transition State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 18 }
snMspsMstMstiPortTopologyChangeSemState OBJECT-TYPE
SYNTAX INTEGER {
inactive (0),
learning (1),
detected (2),
active (3),
notifiedtcn (4),
notifiedtc (5),
propagating (6),
acknowledged (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Topology Change State Machine
for this port in this spanning tree context."
::= { snMspsMstMstiPortEntry 19 }
snMspsMstMstiPortEffectivePortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The effective operational stae of the port for specific instance.
This is will be TRUE only when the port is operationally up in the
interface level and Protocol level for the specific instance.
This is will be set to false at all other times."
::= { snMspsMstMstiPortEntry 20 }
snMspsMstMstiPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost or
dot1dStpPortPathCost32, which returns the operational value
of the path cost."
::= { snMspsMstMstiPortEntry 21 }
snMspsMstMstiPortPseudoRootId OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In MSTP Bridge, the snMspsMstMstiPortPseudoRootId parameter value
by default, it is set to the BridgeIdentifier. The pseudoRootId
is used by Layer Two Gateway Port as the RootId in generated BPDUs."
REFERENCE "IEEE802.1ah - 13.25.20"
::= { snMspsMstMstiPortEntry 22 }
-- -----------------------------------------------------------------
-- END OF Mst Multiple Spanning Tree Instance Port Table
-- -----------------------------------------------------------------
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapMSTPNewRootbridgeDetected NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"(M)STP new Rootbridge detected."
::= { snMspsTrapPrefix 251 }
snMspsTrapMSTPTopChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"(M)STP Topologychange detected."
::= { snMspsTrapPrefix 252 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS SNMP Group Objects
-- ----------------------------------------------------------------
snMspsSnmpObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This MIB module defines MIB objects which provide
mechanisms to remotely configure the attributes used
by an MSPS hosted SNMP entity to control data exchange
with other SNMP entities.
"
::= { snMspsSnmp 1 }
snMspsSnmpAgentAttributes OBJECT-IDENTITY
STATUS current
DESCRIPTION ""
::= { snMspsSnmpObjects 1 }
snMspsSnmpAgentControl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to enable or disable the SNMP agent.
"
DEFVAL { enabled }
::= { snMspsSnmpAgentAttributes 1 }
snMspsSnmpAllowedPduVersions OBJECT-TYPE
SYNTAX INTEGER {
snmpv3(1),
snmpv1v2c(2),
snmpv1v2cv3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
reply to PDUs of a specific SNMP framework version. If
the PDU version of an incoming request does not match
the version required by this object, the PDU will be
silently discarded.
"
DEFVAL { snmpv1v2cv3 }
::= { snMspsSnmpAgentAttributes 2 }
snMspsSnmpMinimumSecurityRequired OBJECT-TYPE
SYNTAX INTEGER {
noAuthNoPriv(1),
authNoPriv(2),
authPriv(3)
}
-- From SNMP-FRAMEWORK-MIB
-- SYNTAX SnmpSecurityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
reply to PDUs of a specific SNMP security level. If
the PDU version of an incoming request does not match
the security level required by this object, the PDU will
be silently discarded.
"
DEFVAL { noAuthNoPriv }
::= { snMspsSnmpAgentAttributes 3 }
snMspsSnmpColdStartTrapControl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
send a cold start trap.
"
DEFVAL { disabled }
::= { snMspsSnmpAgentAttributes 4 }
snMspsSnmpV1V2cPduReadOnly OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
restrict SNMPv1 and SNMPv2c PDUs to read-only access.
Enabling this object overrides any other administrative
setting that would grant read-write access for SNMPv1
and SNMPv2c PDUs to any MIB objects at this agent.
"
DEFVAL { disabled }
::= { snMspsSnmpAgentAttributes 5 }
snMspsSnmpV1TrapControl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the agent will
generate SNMPv1 Trap PDUs.
The administrative state of this object is checked
additionally to any setting from the SNMP-TARGET-MIB
and the SNMP-NOTIFICATION-MIB that influences the
generation of a SNMPv1 Trap PDU.
"
DEFVAL { disabled }
::= { snMspsSnmpAgentAttributes 6 }
snMspsSNMPV3UserMigration OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to control whether the Engine ID
to be migrated or not.
"
DEFVAL { enabled }
::= { snMspsSnmpAgentAttributes 10 }
-- ----------------------
-- snmspsnatv2.mib
--
-- SIEMENS AG
-- Automation & Drives
--
-- object definitions to support NAT functionality
--
-- Copyright (c) 2012 Siemens AG
-- All rights reserved.
-- ----------------------
NatStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of each feature of snMspsNatv2 i.e. whether it is enabled or
not"
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
snMspsNatv2EnabledStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or Disables NATv2 globally."
DEFVAL { disabled }
::= { snMspsNatv2 1 }
snMspsNatv2IdleTimeOut OBJECT-TYPE
SYNTAX Integer32(60..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This gives the amount of time until which a connection can stay idle,
after which the connection will be terminated. The time is given in
seconds."
DEFVAL { 60 }
::= { snMspsNatv2 2 }
snMspsNatv2TcpTimeOut OBJECT-TYPE
SYNTAX Integer32(300..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This gives the amount of time the TCP session entry can be present in the
NAT session table without being used or referred, before being removed from
the NAT session table. Here time is in seconds."
DEFVAL { 3600 }
::= { snMspsNatv2 3 }
snMspsNatv2UdpTimeOut OBJECT-TYPE
SYNTAX Integer32(300..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This gives the amount of time the UDP session entry can be present in the
NAT session table without being used or referred, before being removed from
the NAT session table. Here time is in seconds."
DEFVAL { 300 }
::= { snMspsNatv2 4 }
-- SCALAR_TABLE_END nat
-- NAT Dynamic Table, also called as translation table.
-- dynamic translation entries are created/deleted on the fly.
-- this table is for monitoring and not for configuration.
snMspsNatv2DynamicTransTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2DynamicTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a read-only table which gives the IP address and port
mappings present in the NAT table. This is nothing but the NAT
translation table. Rows can neither be created nor be deleted using
the rowstatus column. Rows are automatically created and deleted by
NAT module. The rowstatus will always hold the value ACTIVE."
::= { snMspsNatv2 5 }
snMspsNatv2DynamicTransEntry OBJECT-TYPE
SYNTAX SnMspsNatv2DynamicTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT dynamic table."
INDEX {
snMspsNatv2DynamicTransInterfaceNum,
snMspsNatv2DynamicTransLocalIp,
snMspsNatv2DynamicTransLocalPort,
snMspsNatv2DynamicTransOutsideIp,
snMspsNatv2DynamicTransOutsidePort
}
::= { snMspsNatv2DynamicTransTable 1 }
SnMspsNatv2DynamicTransEntry ::=
SEQUENCE {
snMspsNatv2DynamicTransInterfaceNum Integer32,
snMspsNatv2DynamicTransLocalIp IpAddress,
snMspsNatv2DynamicTransTranslatedLocalIp IpAddress,
snMspsNatv2DynamicTransLocalPort Integer32,
snMspsNatv2DynamicTransTranslatedLocalPort Integer32,
snMspsNatv2DynamicTransOutsideIp IpAddress,
snMspsNatv2DynamicTransOutsidePort Integer32,
snMspsNatv2DynamicTransLastUseTime Integer32
}
snMspsNatv2DynamicTransInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the global interface number on which the session is going
on."
::= { snMspsNatv2DynamicTransEntry 1 }
snMspsNatv2DynamicTransLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the actual IP address of the host connected to inside
network."
::= { snMspsNatv2DynamicTransEntry 2 }
snMspsNatv2DynamicTransTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the address assigned to the local host by NAT. All the hosts
from outside will contact the local host through this valid IP
Address."
::= { snMspsNatv2DynamicTransEntry 3 }
snMspsNatv2DynamicTransLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the actual source/destination port (UDP/TCP) used by the
local host for communicating with the outside network."
::= { snMspsNatv2DynamicTransEntry 4 }
snMspsNatv2DynamicTransTranslatedLocalPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the port number assigned by NAT, when PAT is enabled.
Otherwise the original port number is retained."
::= { snMspsNatv2DynamicTransEntry 5 }
snMspsNatv2DynamicTransOutsideIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the IP address of the outside host which the above stated
Local host is contacting."
::= { snMspsNatv2DynamicTransEntry 6 }
snMspsNatv2DynamicTransOutsidePort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the port number of the outside host on which it is being
contacted."
::= { snMspsNatv2DynamicTransEntry 7 }
snMspsNatv2DynamicTransLastUseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This gives the amount of time (in seconds) for which the above particular
connection has remained idle."
::= { snMspsNatv2DynamicTransEntry 8 }
-- NAT global IP address table. To list the global IP addresses obtained
-- from IANA.
snMspsNatv2GlobalAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2GlobalAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This configuration table is used to list all the global IP addresses
obtained from InterNIC and which can be used by NAT module for
translation."
::= { snMspsNatv2 6 }
snMspsNatv2GlobalAddressEntry OBJECT-TYPE
SYNTAX SnMspsNatv2GlobalAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT global IP address table."
INDEX {
snMspsNatv2GlobalAddressInterfaceNum,
snMspsNatv2GlobalAddressTranslatedLocalIp
}
::= { snMspsNatv2GlobalAddressTable 1 }
SnMspsNatv2GlobalAddressEntry ::=
SEQUENCE {
snMspsNatv2GlobalAddressInterfaceNum Integer32,
snMspsNatv2GlobalAddressTranslatedLocalIp IpAddress,
snMspsNatv2GlobalAddressMask IpAddress,
snMspsNatv2GlobalAddressEntryStatus RowStatus
}
snMspsNatv2GlobalAddressInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the interface number on which the global IP address given
below should be used for local IP address translation."
::= { snMspsNatv2GlobalAddressEntry 1 }
snMspsNatv2GlobalAddressTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the IP address network number obtained from the IANA which can
be used by NAT for translating the local IP addresses whose packets are
going on the corresponding interface number given by
natGlobalAddressInterfaceNum."
::= { snMspsNatv2GlobalAddressEntry 2 }
snMspsNatv2GlobalAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This when applied on the natGlobalAddressTranslatedLocalIp gives the
range of global IP Addresses that can be used by the NAT module to
translate the local IP Address whose packets are transmitted on the
given interface number."
::= { snMspsNatv2GlobalAddressEntry 3 }
snMspsNatv2GlobalAddressEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2GlobalAddressEntry 4 }
-- NAT Static address assignment table
snMspsNatv2StaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a configurable table in which the static IP address
mapping between the LOCAL IP address and GLOBAL IP address is
configured."
::= { snMspsNatv2 7 }
snMspsNatv2StaticEntry OBJECT-TYPE
SYNTAX SnMspsNatv2StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT static configuration table."
INDEX {
snMspsNatv2StaticInterfaceNum,
snMspsNatv2StaticLocalIp
}
::= { snMspsNatv2StaticTable 1 }
SnMspsNatv2StaticEntry ::=
SEQUENCE {
snMspsNatv2StaticInterfaceNum Integer32,
snMspsNatv2StaticLocalIp IpAddress,
snMspsNatv2StaticTranslatedLocalIp IpAddress,
snMspsNatv2StaticEntryStatus RowStatus
}
snMspsNatv2StaticInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local host listed below will use the corresponding global IP if it
sends packets on this interface."
::= { snMspsNatv2StaticEntry 1 }
snMspsNatv2StaticLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the IP address of the host present in the inside network."
::= { snMspsNatv2StaticEntry 2 }
snMspsNatv2StaticTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP address that should be used in the packets going out
from the given InsideLocalIp host to the outside network. In the
opposite direction this mapping will be used along with the NAT entry
to reverse translation. This global IP will not be used by any other
host."
::= { snMspsNatv2StaticEntry 3 }
snMspsNatv2StaticEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2StaticEntry 4 }
-- NAT Static NAPT assignment table
snMspsNatv2StaticNaptTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2StaticNaptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a configurable table in which the static IP address
and Port mapping between the Local IP address, Local Port and Global
IP address, Global Port is configured."
::= { snMspsNatv2 8 }
snMspsNatv2StaticNaptEntry OBJECT-TYPE
SYNTAX SnMspsNatv2StaticNaptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT StaticNapt configuration table."
INDEX {
snMspsNatv2StaticNaptInterfaceNum,
snMspsNatv2StaticNaptLocalIp,
snMspsNatv2StaticNaptStartLocalPort,
snMspsNatv2StaticNaptEndLocalPort,
snMspsNatv2StaticNaptProtocolNumber
}
::= { snMspsNatv2StaticNaptTable 1 }
SnMspsNatv2StaticNaptEntry ::=
SEQUENCE {
snMspsNatv2StaticNaptInterfaceNum Integer32,
snMspsNatv2StaticNaptLocalIp IpAddress,
snMspsNatv2StaticNaptStartLocalPort Integer32,
snMspsNatv2StaticNaptEndLocalPort Integer32,
snMspsNatv2StaticNaptProtocolNumber INTEGER,
snMspsNatv2StaticNaptTranslatedLocalIp IpAddress,
snMspsNatv2StaticNaptTranslatedLocalPort Integer32,
snMspsNatv2StaticNaptDescription DisplayString,
snMspsNatv2StaticNaptEntryStatus RowStatus
}
snMspsNatv2StaticNaptInterfaceNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local host with the local port listed below will use the
corresponding global IP and global port if it
sends packets on this interface."
::= { snMspsNatv2StaticNaptEntry 1 }
snMspsNatv2StaticNaptLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the IP address of the host present in the inside network."
::= { snMspsNatv2StaticNaptEntry 2 }
snMspsNatv2StaticNaptStartLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the start Port of the host present in the inside network."
::= { snMspsNatv2StaticNaptEntry 3 }
snMspsNatv2StaticNaptEndLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the End Port of the host present in the inside network."
::= { snMspsNatv2StaticNaptEntry 4 }
snMspsNatv2StaticNaptProtocolNumber OBJECT-TYPE
SYNTAX INTEGER {
tcp(6),
udp(17),
any(255)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is protocol number which is to be allowed"
::= { snMspsNatv2StaticNaptEntry 5 }
snMspsNatv2StaticNaptTranslatedLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP address that should be used in the packets going out
from the given InsideLocalIp host to the outside network. In the
opposite direction this mapping will be used along with the NAT entry
to reverse translation."
::= { snMspsNatv2StaticNaptEntry 6 }
snMspsNatv2StaticNaptTranslatedLocalPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port that should be used in the packets going out
from the given InsideLocalIp host to the outside network. In the
opposite direction this mapping will be used along with the NAT entry
to reverse translation. "
::= { snMspsNatv2StaticNaptEntry 7 }
snMspsNatv2StaticNaptDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the description of the entry given by the user at the time
of configuration"
::= { snMspsNatv2StaticNaptEntry 8 }
snMspsNatv2StaticNaptEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2StaticNaptEntry 9 }
--nat interface table
--defines the operation flags
snMspsNatv2IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNatv2IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This tables gives the interface number on which NAT,NAPT and
TWO WAY NAT are enabled."
::= { snMspsNatv2 9 }
snMspsNatv2IfEntry OBJECT-TYPE
SYNTAX SnMspsNatv2IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the NAT Interface table."
INDEX {
snMspsNatv2IfInterfaceNumber
}
::= { snMspsNatv2IfTable 1 }
SnMspsNatv2IfEntry ::=
SEQUENCE {
snMspsNatv2IfInterfaceNumber Integer32,
snMspsNatv2IfNat NatStatus,
snMspsNatv2IfNapt NatStatus,
snMspsNatv2IfEntryStatus RowStatus
}
snMspsNatv2IfInterfaceNumber OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This gives the global interface number on which the following features
can be enabled."
::= { snMspsNatv2IfEntry 1 }
snMspsNatv2IfNat OBJECT-TYPE
SYNTAX NatStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enables NAT on interface number given by natIfInterfaceNumber. Only
the inside host can initiate connections. Translation will be done on
outbound packets only. This object can be enabled only after
natGlobalAddressTable and natLocalAddressTable are configured."
DEFVAL { disabled }
::= { snMspsNatv2IfEntry 2 }
snMspsNatv2IfNapt OBJECT-TYPE
SYNTAX NatStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enables port translation on interface number given by
natIfInterfaceNumber. If this feature is enabled, then the same global IP
address is overloaded and can be used for many local host by translating
the port number. natIfNat gets enabled when this object is enabled and
natIfNat cannot be disabled when natIfNapt is enabled."
DEFVAL { disabled }
::= { snMspsNatv2IfEntry 3 }
snMspsNatv2IfEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { snMspsNatv2IfEntry 4 }
-- ----------------------------------------------------------------
-- MSPS C-PLUG Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-CPLUG-MIB
-- ----------------------------------------------------------------
snMspsCplugState OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
notAccepted (4),
accepted (5),
factory (6),
missing (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status of the C-Plug.
1 - C-PLUG is not present
4 - C-PLUG is not accepted
5 - C-PLUG is accepted
6 - C-PLUG is in factory state
7 - C-PLUG is not present, but needed in the current configuration"
::= { snMspsCplug 1 }
snMspsCplugDeviceGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device Group string, which is currently stored on C-Plug"
::= { snMspsCplug 5 }
snMspsCplugDeviceType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device Type string, which is currently stored on C-Plug"
::= { snMspsCplug 6 }
snMspsCplugInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information about the C-PLUG as null terminated string"
DEFVAL {""}
::= { snMspsCplug 10 }
snMspsCplugErrNum OBJECT-TYPE
SYNTAX INTEGER {
noError (0),
damaged (1),
notReadable (3),
notWritable (4),
crcError (5),
wrongGroupID (6),
wrongTypeID (7),
wrongHwVersion (8),
wrongConfVersion (9),
noCplug (10),
invalidFiles (11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It displays the number of the last error. Following error codes are defined:
0 - C-PLUG has no Error
1 - C-PLUG is damaged
3 - C-PLUG can't be read
4 - C-PLUG can't be written
5 - C-PLUG has a CRC error
6 - No match in group identifier
7 - No match in type identifier
8 - Hardware version is not compatible
9 - Configuration version is not compatible
10 - C-PLUG is not present
11 - Files on the C-PLUG are not valid"
::= { snMspsCplug 11 }
snMspsCplugFileSystem OBJECT-TYPE
SYNTAX INTEGER {
fsNotFound (0),
fsTfssDos (1),
fsIecp (2),
fsInvalid (3),
fsUbifs (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of file system used on C-PLUG.
Following file system types are defined:
0 - No file system found
1 - TFSS DOS
2 - IECP
3 - File system is not valid
4 - UBIFS"
::= { snMspsCplug 12 }
snMspsCplugFileSystemSize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total size of file system memory
in bytes on C-PLUG"
::= { snMspsCplug 13 }
snMspsCplugFileSystemUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The size of file system memory
in bytes on C-PLUG, which is
currently allocated"
::= { snMspsCplug 14 }
snMspsCplugConfRevision OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The revision number of configuration,
which is currently stored on the C-PLUG"
::= { snMspsCplug 15 }
snMspsCplugFwOnPlugStatus OBJECT-TYPE
SYNTAX INTEGER {
not-supported (0),
fw-present(1),
fw-not-present(2),
not-enough-storage(10),
sync-error (11),
plug-not-accepted (12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This status variable represents
current state of feature 'Firmware on PLUG':
0 - The feature is not supported on device.
1 - Firmware file is present on PLUG.
2 - Firmware file is not present on PLUG.
10 - The PLUG has not enough free storage.
11 - An error occurred during copying
or removing firmware file from PLUG.
12 - PLUG has a general error. Additional
information could be evaluated using read access
to snMspsCplugErrNum.
"
::= { snMspsCplug 18 }
snMspsCplugFwOnPlugEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This control variable
enables support of firmware file synchronization with PLUG.
"
DEFVAL { false }
::= { snMspsCplug 19 }
snMspsCplugFormat OBJECT-TYPE
SYNTAX INTEGER {
no-error (0),
clean (1),
write (2),
format-error (3),
no-cplug (4),
clean-in-progress (10),
write-in-progress (11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write access using factoryclean(1) initiates erasing
the complete C-PLUG to factory default. Write access
using write(2) initiates a factory clean and write of
the current device configuration to the C-PLUG. Write
access using other values will cause 'bad value' error.
Read access will return following values:
0 - No error is occurred.
3 - An error is occurred during formatting C-Plug.
4 - C-PLUG is not present on the device.
10 - Erasing C-PLUG to factory default in progress.
11 - Writing current device configuration to C-PLUG in progress.
In error case, additional error information could be evaluated
using read access to snMspsCplugErrNum.
"
::= { snMspsCplug 20 }
-- ----------------------------------------------------------------
-- MSPS KEY-PLUG Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: SN-MSPS-KEY-PLUG-MIB
-- ----------------------------------------------------------------
snMspsKeyPlugState OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
notAccepted (4),
accepted (5),
missing (7),
wrong (8),
unknown (9),
defective (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current state of the KEY-PLUG.
Following states are defined:
1 - KEY-PLUG is not present
4 - KEY-PLUG is not accepted
5 - KEY-PLUG is accepted
7 - KEY-PLUG is missing
(device configuration was
previously created with KEY-PLUG)
8 - KEY-PLUG is wrong
(device configuration was created
with different KEY-PLUG)
9 - KEY-PLUG is unknown
10 - KEY-PLUG is defective"
::= { snMspsKeyPlug 1 }
-- snMspsKeyPlug 2 Reserved for future extensions
-- snMspsKeyPlug 3 Reserved for future extensions
-- snMspsKeyPlug 4 Reserved for future extensions
snMspsKeyPlugHwOrderId OBJECT-TYPE
SYNTAX SnMspsOrderNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Order ID (MLFB number) of KEY-PLUG"
::= { snMspsKeyPlug 5 }
snMspsKeyPlugHwSerialNumber OBJECT-TYPE
SYNTAX SnMspsSerialNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of KEY-PLUG"
::= { snMspsKeyPlug 6 }
snMspsKeyPlugFunction OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of features available with current KEY-PLUG"
::= { snMspsKeyPlug 7 }
-- ----------------------------------------------------------------
-- MSPS LOG Group Objects
-- ----------------------------------------------------------------
-- ----------------------------------------------------------------
-- MSPS Component Objects: LOG MIB
-- ----------------------------------------------------------------
snMspsLogMaxEntries OBJECT-TYPE
SYNTAX INTEGER (10..400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum number of events that can be kept in log book."
DEFVAL { 400 }
::= { snMspsLog 1 }
snMspsLogCurrentEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of events that are currently kept log book."
::= { snMspsLog 2 }
-- snMspsLogNewEntries OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "Counter for events that are logged in Non-Volatile Memory.
-- This counter starts at 0 after each system start. User can reset
-- this counter at any time by writing 0 to this object."
-- DEFVAL { 0 }
-- ::= { snMspsLog 3 }
snMspsLogClear OBJECT-TYPE
SYNTAX INTEGER{
no-operation(1),
start-clear(2),
clear-in-progress(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to start-clear(2) value, clears the
events that are kept in Non-Volatile Memory."
::= { snMspsLog 4 }
snMspsLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the last events that occurred in the system."
::= { snMspsLog 5 }
snMspsLogEntry OBJECT-TYPE
SYNTAX SnMspsLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The description of an event that occurred in the system,
and was stored in log book."
INDEX { snMspsLogEntryIdx }
::= { snMspsLogTable 1 }
SnMspsLogEntry ::= SEQUENCE {
snMspsLogEntryIdx INTEGER,
snMspsLogEntryId INTEGER,
snMspsLogRestart INTEGER,
snMspsLogSysUpTime DisplayString,
snMspsLogDescr DisplayString,
snMspsLogSeverity INTEGER,
snMspsLogSysTime DisplayString
}
snMspsLogEntryIdx OBJECT-TYPE
SYNTAX INTEGER (1..1200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book ID of an entry."
::= { snMspsLogEntry 1 }
snMspsLogEntryId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book internal ID of an entry."
::= { snMspsLogEntry 2 }
snMspsLogRestart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book entrys restart number"
::= { snMspsLogEntry 3 }
snMspsLogSysUpTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System up time of entry in ASCII"
DEFVAL { "" }
::= { snMspsLogEntry 4 }
snMspsLogDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ASCII description of the event."
DEFVAL { "" }
::= { snMspsLogEntry 5 }
snMspsLogSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Severity level of the event"
::= { snMspsLogEntry 6 }
snMspsLogSysTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System time information"
DEFVAL { "" }
::= { snMspsLogEntry 7 }
snMspsSecurityLogMaxEntries OBJECT-TYPE
SYNTAX INTEGER (10..400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of security-relevant events that can be kept in log book."
DEFVAL { 400 }
::= { snMspsLog 20 }
snMspsSecurityCurrentEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of security events that are currently present in the log book."
::= { snMspsLog 21 }
snMspsSecurityLogClear OBJECT-TYPE
SYNTAX INTEGER{
no-operation(1),
start-clear(2),
clear-in-progress(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to start-clear(2) value, clears the
security events that are kept in Non-Volatile Memory."
::= { snMspsLog 22 }
snMspsSecurityLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSecurityLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the last security events that occurred in the system."
::= { snMspsLog 25 }
snMspsSecurityLogEntry OBJECT-TYPE
SYNTAX SnMspsSecurityLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The description of an event that occurred in the system,
and was stored in log book."
INDEX { snMspsSecurityLogEntryIdx }
::= { snMspsSecurityLogTable 1 }
SnMspsSecurityLogEntry ::= SEQUENCE {
snMspsSecurityLogEntryIdx INTEGER,
snMspsSecurityLogEntryId INTEGER,
snMspsSecurityLogRestart INTEGER,
snMspsSecurityLogSysUpTime DisplayString,
snMspsSecurityLogDescr DisplayString,
snMspsSecurityLogSeverity INTEGER,
snMspsSecurityLogSysTime DisplayString
}
snMspsSecurityLogEntryIdx OBJECT-TYPE
SYNTAX INTEGER (1..400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book ID of an entry."
::= { snMspsSecurityLogEntry 1 }
snMspsSecurityLogEntryId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book internal ID of an entry."
::= { snMspsSecurityLogEntry 2 }
snMspsSecurityLogRestart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log book entrys restart number"
::= { snMspsSecurityLogEntry 3 }
snMspsSecurityLogSysUpTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System up time of entry in ASCII"
DEFVAL { "" }
::= { snMspsSecurityLogEntry 4 }
snMspsSecurityLogDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ASCII description of the event."
DEFVAL { "" }
::= { snMspsSecurityLogEntry 5 }
snMspsSecurityLogSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Severity level of the security event"
::= { snMspsSecurityLogEntry 6 }
snMspsSecurityLogSysTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System time information"
DEFVAL { "" }
::= { snMspsSecurityLogEntry 7 }
snMspsFaultState OBJECT-TYPE
SYNTAX INTEGER {
noFault(1),
fault(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates system fault state
(state of fault LED/signaling contact)."
::= { snMspsReport 1 }
snMspsSignalledFaults OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of signaled faults."
::= { snMspsReport 2 }
snMspsFaultValue OBJECT-TYPE
SYNTAX BITS {
power(0),
linkdown(1),
internal-error(2),
standby(3),
rm(4),
fmp(5),
reserved6(6),
reserved7(7),
linkup(8),
loopd(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
reserved14(14),
mrp-interconnection(15),
observer-error(16),
non-recoverable-ring-error(17),
cplug-error(18),
profinet-error(19),
module-error(20),
fan-module-faulty(21),
wlan-no-free-channels(22),
wlan-card(23),
reserved24(24),
reserved25(25),
reserved26(26),
reserved27(27),
reserved28(28),
reserved29(29),
reserved30(30),
reserved31(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fault value: 0 = no fault,
0. Octet MSB bit 0 = power,
0. Octet bit 1 = linkdown,
0. Octet bit 2 = internal error,
0. Octet bit 3 = standby,
0. Octet bit 4 = rm,
0. Octet bit 5 = fmp,
0. Octet bit 6 = reserved,
0. Octet LSB bit 7 = reserved,
1. Octet MSB bit 8 = linkup,
1. Octet bit 9 = loopd,
1. Octet bit 10 = reserved,
1. Octet bit 11 = reserved,
1. Octet bit 12 = reserved,
1. Octet bit 13 = reserved,
1. Octet bit 14 = reserved,
1. Octet LSB bit 15 = MRP interconnection open,
2. Octet MSB bit 16 = observer error,
2. Octet bit 17 = non-recoverable ring error,
2. Octet bit 18 = c-plug error,
2. Octet bit 19 = PROFINET error,
2. Octet bit 20 = module error,
2. Octet bit 21 = fan module faulty,
2. Octet bit 22 = wlan no free channels,
2. Octet LSB bit 23 = wlan card faulty,
3. Octet MSB bit 24 = reserved,
3. Octet bit 25 = reserved,
3. Octet bit 26 = reserved,
3. Octet bit 27 = reserved,
3. Octet bit 28 = reserved,
3. Octet bit 29 = reserved,
3. Octet bit 30 = reserved,
3. Octet LSB bit 31 = reserved"
::= { snMspsReport 3 }
snMspsPowerSupply1State OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of power supply line 1."
::= { snMspsReport 4 }
snMspsPowerSupply2State OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of power supply line 2."
::= { snMspsReport 5 }
snMspsPowerSupply1Mask OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask of power supply line 1."
DEFVAL {notChecked}
::= { snMspsReport 6 }
snMspsPowerSupply2Mask OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask of power supply line 2."
DEFVAL {notChecked}
::= { snMspsReport 7 }
snMspsPowerSupply3Mask OBJECT-TYPE
SYNTAX INTEGER {
checked(1),
notChecked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mask of power supply line 3 (PoE)."
DEFVAL {notChecked}
::= { snMspsReport 8 }
snMspsPowerSupply3State OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of power supply line 3 (PoE)."
::= { snMspsReport 9 }
snMspsSetButtonControlDefaults OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable reset to factory defaults by set select button."
::= { snMspsReport 10 }
snMspsSetButtonControlRm OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable set redundancy master by set select button."
::= { snMspsReport 11 }
snMspsSetButtonControlFaultMask OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable set fault mask by set select button."
::= { snMspsReport 12 }
snMspsReportSyslogStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is for enabling or disabling SYSLOG in the system."
::= { snMspsReport 13 }
snMspsReportSmtpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is for enabling or disabling SMTP in the system."
::= { snMspsReport 14 }
snMspsReportSmsStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is for enabling or disabling SMS functionality in the system.
Enabling is only supported on devices with corresponding functionality."
::= { snMspsReport 30 }
snMspsReportSignalingContactControl OBJECT-TYPE
SYNTAX INTEGER {
conventional(1),
aligned(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set signalling contact control to conventional or to alligned.
- Conventional: Contact opened when Fault
- Aligned: Contact controlled by snSignalingContactState"
DEFVAL {conventional}
::= { snMspsReport 40 }
snMspsReportSignalingContactState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set state of signalling contact - takes only affect if snSignalingContactControl is set to aligned (2)
- on: contact closed
- off: contact opened"
DEFVAL {off}
::= { snMspsReport 41 }
snMspsFaultResetCounters OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset all fault counters."
::= { snMspsReport 42 }
snMspsPowerSupplyRedundancyMonitor OBJECT-TYPE
SYNTAX INTEGER {
all(1),
l1-l2(2),
l1-l3(3),
l2-l3(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In case the redundant power supply will be monitored by PROFINET,
the value of this object defines, which power lines
have to be considered.
all(1) - all available power lines will be monitored
l1-l2(2) - only L1 and L2 will be monitored
l1-l3(3) - only L1 and L3 will be monitored
l2-l3(4) - only L2 and L3 will be monitored
This object can only be configured if the device
has more than one power line.
"
DEFVAL {1}
::= { snMspsReport 50 }
snMspsSetButtonControlRestart OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable restart device by set select button."
::= { snMspsReport 54 }
-- --------------------------------------------------------------
-- Report Fault State Sub-Group
-- --------------------------------------------------------------
snMspsReportFaultStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsReportFaultStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Fault state table."
::= { snMspsReport 60 }
snMspsReportFaultStateEntry OBJECT-TYPE
SYNTAX SnMspsReportFaultStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Fault state table rows entries."
INDEX { snMspsReportFaultIndex }
::= { snMspsReportFaultStateTable 1 }
SnMspsReportFaultStateEntry ::= SEQUENCE {
snMspsReportFaultIndex Integer32,
snMspsReportFaultStateTimeStamp TimeTicks,
snMspsReportFaultState DisplayString,
snMspsReportFaultStateClear INTEGER
}
snMspsReportFaultIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of fault state table."
::= { snMspsReportFaultStateEntry 1 }
snMspsReportFaultStateTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current value of sysUpTime, when
the relevant fault state occurs."
::= { snMspsReportFaultStateEntry 2 }
snMspsReportFaultState OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fault state."
::= { snMspsReportFaultStateEntry 3 }
snMspsReportFaultStateClear OBJECT-TYPE
SYNTAX INTEGER{
no-operation(0),
delete(1),
not-supported(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write access using delete(1) leads to
deleting relevant fault state from system. Read access
to this MIB object will return no-operation(0), if this entry
is in initial state. Read access to this MIB object will return
not-supported(2), if this fault state must not be cleared"
::= { snMspsReportFaultStateEntry 4 }
-- --------------------------------------------------------------
-- Report Event Table
-- --------------------------------------------------------------
snMspsReportEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsReportEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table which contains the targets to
which notifications shall be sent"
::= { snMspsReport 80 }
snMspsReportEventEntry OBJECT-TYPE
SYNTAX SnMspsReportEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Different kinds of notifications
can be configured per event."
INDEX { snMspsReportEventIndex }
::= { snMspsReportEventTable 1 }
SnMspsReportEventEntry ::= SEQUENCE {
snMspsReportEventIndex INTEGER,
snMspsReportEventType INTEGER,
snMspsReportEventMail TruthValue,
snMspsReportEventLog TruthValue,
snMspsReportEventTrap TruthValue,
snMspsReportEventSysLog TruthValue,
snMspsReportEventFault TruthValue
}
snMspsReportEventIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of each event, which has to be configured"
::= { snMspsReportEventEntry 1 }
snMspsReportEventType OBJECT-TYPE
SYNTAX INTEGER {
cold-warm-start(0),
link-change(1),
auth-failure(2),
rmon-alarm(3),
power-change(4),
rm-state-change(5),
stp-rstp-mstp-change(6),
fault-state(7),
standby-state-change(8),
vrrp-state-change(9),
wlan-overlap-ap(10),
wlan-wds(11),
wlan-radar-iterference(12),
wlan-authentication(13),
wlan-authentication-log(14),
loopd-state-change(15),
ipcf-max-station(16),
ipcf-update-time(17),
cyclic-poll-excd(18),
ospf-state-change(19),
ddns-client-logs(22),
system-connection-status(24),
wlan-general(25),
pnac-port-auth-state-change(27),
poe-state-change(28),
digital-in(29),
vpn-tunnel(30),
fmp-state-change(31),
linkcheck-change(32),
cli-script-file-status(33),
secure-ntp(34),
config-change(35),
mrp-interconnection-state-change(36),
service-information(37)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enables or disables different kinds the occurred events could be processed.
Possible values are:
0 - Cold or Warm start notification
1 - Link change notification
2 - Authentication failure notification
3 - RMON alarm notification
4 - Power change notification
5 - RM state change notification
6 - Spanning Tree notification
7 - Fault notification
8 - Standby state change notification
9 - VRRP state change notification
10 - Wireless overlap AP events
11 - Wireless WDS events
12 - Wireless radar intereference detection
13 - Wireless authentication events
14 - Wireless authentiction log
15 - Loop Detection state change notification
16 - iPCF PROFINET max. Station
17 - iPCF PROFINET max. Update Time
18 - iPCF PROFINET Cyclic Poll Size Excd.
19 - OSPF state change notification
25 - Wireless General
27 - PNAC port authentication state change event
28 - PoE state change notification
29 - Digital Input
30 - VPN Tunnel
31 - FMP state change notification
32 - Linkcheck change notification
33 - CLI Script File status notification
34 - Secure NTP
35 - Configuration Change
36 - MRP Interconnection state change notification
37 - Service Information"
::= { snMspsReportEventEntry 2 }
snMspsReportEventMail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables mail notification when relevant event
occurs. If this kind of notification is not supported
by event, the write access with true will return
bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 3 }
snMspsReportEventLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables creating log entry when relevant event
occurs. If this kind of notification is not supported
by event, the write access with true will return
bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 4 }
snMspsReportEventTrap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables sending traps when relevant event occurs.
If this kind of notifi-cation is not supported by event,
the write access with true will return bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 5 }
snMspsReportEventSysLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables creating syslog entry when relevant event occurs.
If this kind of notification is not supported by event, the write
access with true will return bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 6 }
snMspsReportEventFault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables/disables fault notification when relevant event occurs.
If this kind of notification is not supported by event, the write
access with true will return bad value error."
DEFVAL { false }
::= { snMspsReportEventEntry 7 }
-- --------------------------------------------------------------
-- Report Severity Table
-- --------------------------------------------------------------
snMspsReportSeverityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsReportSeverityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table which contains the severity levels for given client types"
::= { snMspsReport 85 }
snMspsReportSeverityEntry OBJECT-TYPE
SYNTAX SnMspsReportSeverityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Different kinds of severities
can be configured per client type."
INDEX { snMspsReportSeverityIndex }
::= { snMspsReportSeverityTable 1 }
SnMspsReportSeverityEntry ::= SEQUENCE {
snMspsReportSeverityIndex INTEGER,
snMspsReportSeverityClientType INTEGER,
snMspsReportSeveritySeverity INTEGER
}
snMspsReportSeverityIndex OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of each event, which has to be configured with a severity"
::= { snMspsReportSeverityEntry 1 }
snMspsReportSeverityClientType OBJECT-TYPE
SYNTAX INTEGER {
log(1),
mail(2),
syslog(3),
sms(4),
wlan-authlog(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The client type of the entry"
::= { snMspsReportSeverityEntry 2 }
snMspsReportSeveritySeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The severity level of the given client type"
::= { snMspsReportSeverityEntry 3 }
-- --------------------------------------------------------------
-- Service information
-- --------------------------------------------------------------
snMspsReportServiceInformation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..512))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Description of service information"
::= { snMspsReport 90 }
-- ---------------------------------------------
-- MIB module-specific TRAP definitions
-- (SN-MSPS-REPORT-MIB)
-- ---------------------------------------------
snMspsTrapPowerLine1Down NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power down on line L1."
::= { snMspsTrapPrefix 1851 }
snMspsTrapPowerLine1Up NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power up on line L1."
::= { snMspsTrapPrefix 1852 }
snMspsTrapPowerLine2Down NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power down on line L2."
::= { snMspsTrapPrefix 1853 }
snMspsTrapPowerLine2Up NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power up on line L2."
::= { snMspsTrapPrefix 1854 }
snMspsTrapChangedFaultState NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Device changed fault state."
::= { snMspsTrapPrefix 1855 }
snMspsTrapPoEDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power down on line L3 (PoE)."
::= { snMspsTrapPrefix 1856 }
snMspsTrapPoEUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power up on line L3 (PoE)."
::= { snMspsTrapPrefix 1857 }
snMspsTrapEnvData NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"EnvData Warnings."
::= { snMspsTrapPrefix 1860 }
snMspsTrapServiceInformation NOTIFICATION-TYPE
OBJECTS { snMspsReportServiceInformation }
STATUS current
DESCRIPTION "Serivce Information."
::= { snMspsTrapPrefix 1861 }
snMspsTrapCLIScriptFileStatus NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"EnvData Warnings."
::= { snMspsTrapPrefix 1862 }
snMspsTrapConfigurationChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"EnvData Warnings."
::= { snMspsTrapPrefix 1863 }
-- snMspsSyslogClient 1 reserved
snMspsSyslogTimeStamp OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is not used. Timestamp is a mandatory field
in Syslog Message format"
DEFVAL { enable }
::= { snMspsSyslogClient 2 }
snMspsSyslogConsoleLog OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the console log option.
When enabled, the messages (log and email alert messages) sent to
the server will be displayed in the console also.
When disabled,the messages will just be sent to the servers and not
be displayed in the console."
DEFVAL { enable }
::= { snMspsSyslogClient 3 }
snMspsSyslogSysBuffers OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of log buffers to be allocated in the system"
DEFVAL { 50 }
::= { snMspsSyslogClient 4 }
snMspsSyslogSmtpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the mail server Port to be used for sending email alerts.
By default the the port is 25"
::= { snMspsSyslogClient 5 }
-- snMspsSyslogConfigTable
-- This table is for configuring the log level options for the module.
snMspsSyslogConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring module specific log levels."
::= { snMspsSyslogClient 6 }
snMspsSyslogConfigEntry OBJECT-TYPE
SYNTAX SnMspsSyslogConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing logging level options for a particular module."
INDEX { snMspsSyslogConfigModule }
::= { snMspsSyslogConfigTable 1 }
SnMspsSyslogConfigEntry ::=
SEQUENCE {
snMspsSyslogConfigModule INTEGER,
snMspsSyslogConfigLogLevel INTEGER
}
snMspsSyslogConfigModule OBJECT-TYPE
SYNTAX INTEGER{
web(1), -- For WEB module
msr(2), -- For MSR module
tftp(3), -- For TFTP module
cli(4) -- For CLI module
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the module for which the log level option has to be
configured."
::= { snMspsSyslogConfigEntry 1 }
snMspsSyslogConfigLogLevel OBJECT-TYPE
SYNTAX INTEGER{
emergency(0), -- For logging messages that
-- are equivalent to panic
-- condition.
alert(1), -- For logging messages that
-- require immediate attention.
critical(2), -- For logging critical errors.
error(3), -- For logging error messages.
warning(4), -- For logging warning messages.
notice(5), -- For logging messages that
-- require attention
-- and not errors.
info(6), -- For logging informational
-- messages.
debug(7) -- For logging debug messages.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the log level option to be set for a specific module."
::= { snMspsSyslogConfigEntry 2 }
snMspsSyslogFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(128), -- Reserved local use
local1(136), -- Reserved local use
local2(144), -- Reserved local use
local3(152), -- Reserved local use
local4(160), -- Reserved local use
local5(168), -- Reserved local use
local6(176), -- Reserved local use
local7(184) -- Reserved local use
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server."
DEFVAL { local0 }
::= { snMspsSyslogClient 7 }
--snMspsSyslogRole
--This scalar for configuring syslog role
snMspsSyslogRole OBJECT-TYPE
SYNTAX INTEGER {
device(1),
relay(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog supports two type of roles one is Device and other is Relay
Device can generate and forward the syslog message
Relay can receive , generate and forward the syslog messages
Relay check whether the received packet is as per BSD Syslog format
if not relay makes the message to BSD Syslog format and forward
Default role is device."
DEFVAL { device }
::= { snMspsSyslogClient 8 }
--snMspsSyslogLogFile
--This scalar for enabling local storage
snMspsSyslogLogFile OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog supports storing of syslog messages in the file as configured by admin
This object is used to enable or disable the syslog local storage
By default the local storage option is disabled."
DEFVAL {disable }
::= { snMspsSyslogClient 9 }
--snMspsSyslogMail
--This scalar for enabling mail option
snMspsSyslogMail OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog supports sending syslog message to any mail-id as configured by the admin
This object is used to enable or disable the syslog mail storage
By default the syslog mail option is disabled."
DEFVAL {disable }
::= { snMspsSyslogClient 10 }
--snMspsSyslogProfile
--This scalar for setting the syslog profile.
snMspsSyslogProfile OBJECT-TYPE
SYNTAX INTEGER {
raw(1),
cooked(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Beep supports two types of profile. One is raw other is cooked profile.
This object is used to set the profile for beep
By default the beep profile is raw."
DEFVAL {raw}
::= { snMspsSyslogClient 11 }
--snMspsSyslogRelayPort
--This scalar for setting the syslog port in relay for receiving
--syslog messages from other relay/device.
snMspsSyslogRelayPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure port in which the relay listens
Irrespective of the transport type, the relay opens the socket
and listen on the port configured here.
By default the relay will listen on port 514."
DEFVAL {514}
::= { snMspsSyslogClient 12}
--snMspsSyslogRelayTransType
--This scalar for setting the syslog relay transport type.
snMspsSyslogRelayTransType OBJECT-TYPE
SYNTAX INTEGER {
udp(1),
tcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Relay supports UDP and TCP transport type.When the transport type is configured
as UDP, relay receives syslog messages via UDP socket.When the transport type is
configured as TCP, relay receives syslog message via TCP socket."
DEFVAL {udp}
::= { snMspsSyslogClient 13 }
--snMspsSyslogFileNameOne
-- This Scalar is to configure file name for syslog local storage
snMspsSyslogFileNameOne OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog can store the messages locally in three different files.This scalar is to
get the file name"
::= { snMspsSyslogClient 14 }
--snMspsSyslogFileNameTwo
-- This Scalar is to configure file name for syslog local storage
snMspsSyslogFileNameTwo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog can store the messages locally in three different files.This scalar is to
get the file name"
::= { snMspsSyslogClient 15 }
--snMspsSyslogFileNameThree
-- This Scalar is to configure file name for syslog local storage
snMspsSyslogFileNameThree OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog can store the messages locally in three different files.This scalar is to
get the file name"
::= { snMspsSyslogClient 16 }
-- snMspsSyslogFileTable
-- This table is for configuring the file table
snMspsSyslogFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority and filename.
Both priority and file name is considered as index "
::= { snMspsSyslogClient 17 }
snMspsSyslogFileEntry OBJECT-TYPE
SYNTAX SnMspsSyslogFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority,file name.
Both priority and file name is considered as index"
INDEX { snMspsSyslogFilePriority, snMspsSyslogFileName }
::= { snMspsSyslogFileTable 1 }
SnMspsSyslogFileEntry ::=
SEQUENCE {
snMspsSyslogFilePriority Integer32,
snMspsSyslogFileName DisplayString,
snMspsSyslogFileRowStatus RowStatus
}
snMspsSyslogFilePriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Object specifies the priority for which it should be written in file.
Priority value ranges from 0 to 191"
::= { snMspsSyslogFileEntry 1 }
snMspsSyslogFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the file name to which syslog message is written."
::= { snMspsSyslogFileEntry 2 }
snMspsSyslogFileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the Status of the File Entry."
::= {snMspsSyslogFileEntry 3}
snMspsSyslogLogSrvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is is not used. Instead snMspsSyslogFwdServerIP
is used for configuring syslog server IP for remote logging. "
::= { snMspsSyslogClient 18 }
-- snMspsSyslogClient 19 reserved
-- snMspsSyslogFwdTable
-- This table is for configuring the Logging server forward table
snMspsSyslogFwdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority,server address type, server address,
port through which it can send and tranport type."
::= { snMspsSyslogClient 20 }
snMspsSyslogFwdEntry OBJECT-TYPE
SYNTAX SnMspsSyslogFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing index as priority , server address type and server address."
INDEX { snMspsSyslogFwdPriority,snMspsSyslogFwdAddressType,snMspsSyslogFwdServerIP}
::= { snMspsSyslogFwdTable 1 }
SnMspsSyslogFwdEntry ::=
SEQUENCE {
snMspsSyslogFwdPriority Integer32,
snMspsSyslogFwdAddressType InetAddressType,
snMspsSyslogFwdServerIP InetAddress,
snMspsSyslogFwdPort Integer32,
snMspsSyslogFwdTransType INTEGER,
snMspsSyslogFwdRowStatus RowStatus
}
snMspsSyslogFwdPriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the priority which is to be forwarded to the desired server.
Priority can take the value from 0 to 191."
::= { snMspsSyslogFwdEntry 1 }
snMspsSyslogFwdAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Address type of server.Address type shall be ipv4 or ipv6."
::= { snMspsSyslogFwdEntry 2 }
snMspsSyslogFwdServerIP OBJECT-TYPE
SYNTAX InetAddress(SIZE(4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the ServerIP to which the syslog shall be forwarded."
::= { snMspsSyslogFwdEntry 3 }
snMspsSyslogFwdPort OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Port through which it can send the syslog message.
By default the the port is 514"
DEFVAL { 514 }
::= { snMspsSyslogFwdEntry 4 }
snMspsSyslogFwdTransType OBJECT-TYPE
SYNTAX INTEGER {
udp (0),
tcp (1),
beep (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Transport type using which it can send syslog message.
By default the tranport type is udp"
DEFVAL { udp }
::= { snMspsSyslogFwdEntry 5 }
snMspsSyslogFwdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Status of the Fwd Entry."
::= {snMspsSyslogFwdEntry 6}
snMspsSyslogSmtpSrvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is not used. snMspsSyslogMailServAdd is used for
specifing the mail server IP to be used for sending email alerts."
::= { snMspsSyslogClient 21 }
snMspsSyslogSmtpRcvrMailId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..100))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Currently this object is not used. snMspsSyslogRxMailId is used for
specifing the receiver mail ID for email alerts."
DEFVAL { "admin@futsoft.com" }
::= { snMspsSyslogClient 22 }
snMspsSyslogSmtpSenderMailId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the sender mail ID for email alerts."
::= { snMspsSyslogClient 23 }
-- snMspsSyslogMailTable
-- This table is for configuring the Mail table
snMspsSyslogMailTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing entries of priority,mail server address type,mail
server address and receiver mail id"
::= { snMspsSyslogClient 24 }
snMspsSyslogMailEntry OBJECT-TYPE
SYNTAX SnMspsSyslogMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mail Table contains index as priority , mail server address type and
mail server address."
INDEX { snMspsSyslogMailPriority, snMspsSyslogMailServAddType , snMspsSyslogMailServAdd }
::= { snMspsSyslogMailTable 1 }
SnMspsSyslogMailEntry ::=
SEQUENCE {
snMspsSyslogMailPriority Integer32,
snMspsSyslogMailServAddType InetAddressType,
snMspsSyslogMailServAdd InetAddress,
snMspsSyslogRxMailId DisplayString,
snMspsSyslogMailRowStatus RowStatus,
snMspsSyslogMailPort Unsigned32,
snMspsSyslogMailSender DisplayString,
snMspsSyslogMailUsername DisplayString,
snMspsSyslogMailPassword DisplayString,
snMspsSyslogMailSecurity INTEGER
}
snMspsSyslogMailPriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the priority which is to be mailed.
Priority can be in the range 0 to 191"
::= { snMspsSyslogMailEntry 1 }
snMspsSyslogMailServAddType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Mail Server Address Type.
Address type can be ipv4 or ipv6"
::= { snMspsSyslogMailEntry 2 }
snMspsSyslogMailServAdd OBJECT-TYPE
SYNTAX InetAddress(SIZE(4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Mail Server ip.
Server Address can be ipv4 or ipv6"
::= { snMspsSyslogMailEntry 3 }
snMspsSyslogRxMailId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently this object is not used. snMspsSyslogMailReceiverTable is used for
specifing the receiver mail ID for email alerts"
::= { snMspsSyslogMailEntry 4 }
snMspsSyslogMailRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies RowStatus of the Mail Entry."
::= {snMspsSyslogMailEntry 5}
snMspsSyslogMailPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port of the Mail Entry.
By default the port is 25"
DEFVAL { 25 }
::= {snMspsSyslogMailEntry 8}
snMspsSyslogMailSender OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the sender mail ID for the Mail Entry."
::= { snMspsSyslogMailEntry 11 }
snMspsSyslogMailUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the username for the Mail Entry."
::= { snMspsSyslogMailEntry 14 }
snMspsSyslogMailPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the password for the Mail Entry."
::= { snMspsSyslogMailEntry 17 }
snMspsSyslogMailSecurity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ssltls(1),
starttls(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the security for the Mail Entry."
DEFVAL { 1 }
::= { snMspsSyslogMailEntry 20 }
-- snMspsSyslogMailReceiverTable
-- This table is for configuring the Mail receiver table
snMspsSyslogMailReceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSyslogMailReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing receiver entries for mail service"
::= { snMspsSyslogClient 25 }
snMspsSyslogMailReceiverEntry OBJECT-TYPE
SYNTAX SnMspsSyslogMailReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mail receiver table contains index as priority , mail server address type,
mail server address and Index."
INDEX {
snMspsSyslogMailReceiverServerPriority,
snMspsSyslogMailReceiverServerAddressType,
snMspsSyslogMailReceiverServerAddress,
snMspsSyslogMailReceiverIndex
}
::= { snMspsSyslogMailReceiverTable 1 }
SnMspsSyslogMailReceiverEntry ::=
SEQUENCE {
snMspsSyslogMailReceiverServerPriority Integer32,
snMspsSyslogMailReceiverServerAddressType InetAddressType,
snMspsSyslogMailReceiverServerAddress InetAddress,
snMspsSyslogMailReceiverIndex INTEGER,
snMspsSyslogMailReceiverMailAddress DisplayString,
snMspsSyslogMailReceiverEnabled INTEGER,
snMspsSyslogMailReceiverRowStatus RowStatus
}
snMspsSyslogMailReceiverServerPriority OBJECT-TYPE
SYNTAX Integer32(0..191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents snMspsSyslogMailPriority"
::= { snMspsSyslogMailReceiverEntry 1 }
snMspsSyslogMailReceiverServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents snMspsSyslogMailServAddType"
::= { snMspsSyslogMailReceiverEntry 2 }
snMspsSyslogMailReceiverServerAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents snMspsSyslogMailServAdd"
::= { snMspsSyslogMailReceiverEntry 3 }
snMspsSyslogMailReceiverIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index variable of snMspsSyslogMailReceiverTable."
::= { snMspsSyslogMailReceiverEntry 4 }
snMspsSyslogMailReceiverMailAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for
specifing the receiver mail ID for email alerts"
::= { snMspsSyslogMailReceiverEntry 5 }
snMspsSyslogMailReceiverEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object informs whether the entry is active or inactive"
DEFVAL {disable }
::= { snMspsSyslogMailReceiverEntry 6 }
snMspsSyslogMailReceiverRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies RowStatus of the Receiver Entry."
::= {snMspsSyslogMailReceiverEntry 100}
TunnelStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"To specify how to handle the L2 protocol packets received on a
particular port.
When the option is set to 'peer', the L2 protocol packets received
on a particular port will be processed in the Bridge.
When the option is set to 'tunnel', the L2 protocol packets received
on a particular port will be transparently transmitted in the provider
network and will not be processed in the Provider Bridges/Provider Edge
Bridges.
When the option is set to 'discard', the L2 protocol packets
received over a particular port will not be processed and discarded."
SYNTAX INTEGER { peer(1), tunnel(2), discard(3) }
-- -------------------------------------------------------------
-- Dynamic Group Registration Table
-- -------------------------------------------------------------
-- snMspsVlan 1-3 reserved
snMspsDot1qTpGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qTpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for VLANs
configured into the bridge by (local or network)
management, or learnt dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded. This table maintains context ID
as one more index to support Multiple Instances."
::= { snMspsVlan 4 }
snMspsDot1qTpGroupEntry OBJECT-TYPE
SYNTAX SnMspsDot1qTpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the bridge by
management, or learnt dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded. The subset of these ports learnt dynamically
is also provided."
INDEX { dot1qVlanIndex, snMspsDot1qTpGroupAddress, snMspsDot1qTpPort }
::= { snMspsDot1qTpGroupTable 1 }
SnMspsDot1qTpGroupEntry ::=
SEQUENCE { snMspsDot1qTpGroupAddress MacAddress,
snMspsDot1qTpPort Integer32,
snMspsDot1qTpGroupIsLearnt TruthValue }
snMspsDot1qTpGroupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination Group MAC address in a frame to which
this entry's filtering information applies."
::= { snMspsDot1qTpGroupEntry 1 }
snMspsDot1qTpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of the port for which this entry applies."
::= { snMspsDot1qTpGroupEntry 2 }
snMspsDot1qTpGroupIsLearnt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port is statically configured or a
dynamic member of the Group address learnt through GMRP."
::= { snMspsDot1qTpGroupEntry 3 }
-- -------------------------------------------------------------
-- END OF Dynamic Group Registration Table
-- -------------------------------------------------------------
-- snMspsVlan 5-7 reserved
snMspsDot1qVlanStaticPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanStaticPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the information of tagged, untagged
and forbidden ports for each VLAN."
::= { snMspsVlan 8 }
snMspsDot1qVlanStaticPortConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanStaticPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information about a port, Whether it is a
member or a forbidden member."
INDEX { dot1qVlanIndex, snMspsDot1qTpPort }
::= { snMspsDot1qVlanStaticPortConfigTable 1 }
SnMspsDot1qVlanStaticPortConfigEntry ::=
SEQUENCE {
snMspsDot1qVlanStaticPort
INTEGER
}
snMspsDot1qVlanStaticPort OBJECT-TYPE
SYNTAX INTEGER {
addTagged(1),
addUntagged(2),
addForbidden(3),
delTagged(4),
delUntagged(5),
delForbidden(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the forwarding information for this VLAN.
'addTagged' - to add the port in the tagged portlist.
'addUntagged' - to add the port in the untagged portlist.
'addForbidden' - to add the port in the forbidden portlist.
'delTagged' - to delete the port from the tagged portlist.
'delUntagged' - to delete the port from the untagged portlist.
'delForbidden' - to delete the port from the forbidden portlist."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { snMspsDot1qVlanStaticPortConfigEntry 1 }
snMspsDot1qStaticAllowedToGoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qStaticAllowedToGoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the information of AllowedToGoTo
ports for each static unicast entry. This table
maintains context ID as one more index to support
Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
::= { snMspsVlan 9 }
snMspsDot1qStaticAllowedToGoEntry OBJECT-TYPE
SYNTAX SnMspsDot1qStaticAllowedToGoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a port, Whether it is an AllowedToGoTo
member or not."
INDEX {
dot1qFdbId,
dot1qStaticUnicastAddress,
dot1qStaticUnicastReceivePort,
snMspsDot1qTpPort
}
::= { snMspsDot1qStaticAllowedToGoTable 1 }
SnMspsDot1qStaticAllowedToGoEntry ::=
SEQUENCE { snMspsDot1qStaticAllowedIsMember TruthValue }
snMspsDot1qStaticAllowedIsMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is an allowedToGoTo member."
REFERENCE
"IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
::= { snMspsDot1qStaticAllowedToGoEntry 1 }
-- -------------------------------------------------------------
-- The Static (Destination-Address Filtering) Database
-- -------------------------------------------------------------
snMspsMIDot1qStaticUnicastExtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMIDot1qStaticUnicastExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only. This table maintains context ID as
one more index to support Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7,
ISO/IEC 15802-3 Section 7.9.1"
::= { snMspsVlan 10 }
snMspsMIDot1qStaticUnicastExtnEntry OBJECT-TYPE
SYNTAX SnMspsMIDot1qStaticUnicastExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded."
AUGMENTS { dot1qStaticUnicastEntry }
::= { snMspsMIDot1qStaticUnicastExtnTable 1 }
SnMspsMIDot1qStaticUnicastExtnEntry ::=
SEQUENCE {
snMspsMIDot1qStaticConnectionIdentifier
MacAddress
}
snMspsMIDot1qStaticConnectionIdentifier OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to associate the backbone MAC address of the
peer backbone edge bridge with customer Mac addresses that
can be reached through the peer backbone edge bridge."
::= { snMspsMIDot1qStaticUnicastExtnEntry 1 }
-- -------------------------------------------------------------
-- END OF The Static (Destination-Address Filtering) Database
-- -------------------------------------------------------------
snMspsDot1qForwardAllStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardAllStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to maintain the status of static
and forbidden portlist required in ForwardAll table
for VLAN. This table maintains context ID as one more
index to support Multiple Instances."
::= { snMspsVlan 11 }
snMspsDot1qForwardAllStatusEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardAllStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry to specify the status of static and
forbidden portlist in ForwardAll Table."
INDEX { dot1qVlanIndex }
::= { snMspsDot1qForwardAllStatusTable 1 }
SnMspsDot1qForwardAllStatusEntry ::=
SEQUENCE {
snMspsDot1qForwardAllRowStatus
RowStatus
}
snMspsDot1qForwardAllRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of the PortLists
(Static, Forbidden) used in the forwarding
information of a VLAN (ForwardAll). To fill the
static and forbidden portlist, we have to set the
rowstatus as 'NOT_IN_SERVICE' and set the appropriate
port in the snMspsDot1qForwardUnregPortConfigTable and
set the rowstatus as 'ACTIVE' to make the portlist
available."
::= { snMspsDot1qForwardAllStatusEntry 1 }
snMspsDot1qForwardAllPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardAllPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the forwarding information of static
ports and forbidden ports for each VLAN. This table
maintains context ID as one more index to support
Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
::= { snMspsVlan 12 }
snMspsDot1qForwardAllPortConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardAllPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information about a port, Whether it is a
member or a forbidden member."
INDEX { dot1qVlanIndex, snMspsDot1qTpPort }
::= { snMspsDot1qForwardAllPortConfigTable 1 }
SnMspsDot1qForwardAllPortConfigEntry ::=
SEQUENCE {
snMspsDot1qForwardAllPort
INTEGER
}
snMspsDot1qForwardAllPort OBJECT-TYPE
SYNTAX INTEGER {
addMember(1),
addForbidden(2),
delMember(3),
delForbidden(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the forwarding information for this VLAN.
'addMember' - to add the port in the static
member-list.
'addForbidden' - to add the port in the forbidden
member-list.
'delMember' - to remove the port from the static
member-list.
'delForbidden' - to remove the port from the forbidden
member-list."
::= { snMspsDot1qForwardAllPortConfigEntry 1 }
-- snMspsVlan 13-14 reserved
snMspsDot1qForwardUnregStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardUnregStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to maintain the status of static
and forbidden portlist required in ForwardUnreg table
for VLAN. This table maintains context ID as one more
index to support Multiple Instances."
::= { snMspsVlan 15 }
snMspsDot1qForwardUnregStatusEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardUnregStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry to specify the status of static and
forbidden portlist in ForwardUnreg table."
INDEX { dot1qVlanIndex }
::= { snMspsDot1qForwardUnregStatusTable 1 }
SnMspsDot1qForwardUnregStatusEntry ::=
SEQUENCE {
snMspsDot1qForwardUnregRowStatus
RowStatus
}
snMspsDot1qForwardUnregRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of the PortLists
(Static, Forbidden) used in the forwarding
information of a VLAN (ForwardUnreg). To fill the
static and forbidden portlist, we have to set the
rowstatus as 'NOT_IN_SERVICE' and set the appropriate
port in the snMspsDot1qForwardUnregPortConfigTable and
set the rowstatus as 'ACTIVE' to make the portlist
available."
::= { snMspsDot1qForwardUnregStatusEntry 1 }
snMspsDot1qForwardUnregPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qForwardUnregPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the information of static ports
and forbidden ports to which forwarding of multicast
group-addressed frames for which there is no more
specific forwarding information applies (per VLAN).
This table maintains context ID as one more index to
support Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
::= { snMspsVlan 16 }
snMspsDot1qForwardUnregPortConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1qForwardUnregPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information about a port, Whether it is a
member or a forbidden member."
INDEX {dot1qVlanIndex, snMspsDot1qTpPort }
::= { snMspsDot1qForwardUnregPortConfigTable 1 }
SnMspsDot1qForwardUnregPortConfigEntry ::=
SEQUENCE {
snMspsDot1qForwardUnregPort
INTEGER
}
snMspsDot1qForwardUnregPort OBJECT-TYPE
SYNTAX INTEGER {
addMember(1),
addForbidden(2),
delMember(3),
delForbidden(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the forwarding information for this VLAN.
'addMember' - to add the port in the static
member-list.
'addForbidden' - to add the port in the forbidden
member-list.
'delMember' - to remove the port from the static
member-list.
'delForbidden' - to remove the port from the forbidden
member-list."
::= { snMspsDot1qForwardUnregPortConfigEntry 1 }
-- snMspsVlan 17 reserved
snMspsDot1qStaticMcastPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qStaticMcastPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing egress and forbidden ports for
static multicast entry. This table maintains context
ID as one more index to support Multiple Instance."
::= { snMspsVlan 18 }
snMspsDot1qStaticMcastPortEntry OBJECT-TYPE
SYNTAX SnMspsDot1qStaticMcastPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a port, Whether it is a member or
a forbidden member."
INDEX {
dot1qVlanIndex,
dot1qStaticMulticastAddress,
dot1qStaticMulticastReceivePort,
snMspsDot1qTpPort
}
::= { snMspsDot1qStaticMcastPortTable 1 }
SnMspsDot1qStaticMcastPortEntry ::=
SEQUENCE {
snMspsDot1qStaticMcastPort
INTEGER
}
snMspsDot1qStaticMcastPort OBJECT-TYPE
SYNTAX INTEGER {
addMember(1),
addForbidden(2),
delMember(3),
delForbidden(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is a member or a forbidden
member in the static multicast entry.
'addMember' - to add the port in the egress
member-list.
'addForbidden' - to add the port in the forbidden
member-list.
'delMember' - to remove the port from the egress
member-list.
'delForbidden' - to remove the port from the forbidden
member-list."
::= { snMspsDot1qStaticMcastPortEntry 1 }
snMspsDot1qVlanWildCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanWildCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wild card vlan (Id : 0xFFF) static filtering information
will be used for all Vlans for which there is no specific
Static filtering exists in dot1qStaticUnicastTable or
dot1qStaticMulticastTable."
::= { snMspsVlan 19 }
snMspsDot1qVlanWildCardEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanWildCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WildCard vlan filtering Information configured into device by
management to which frames received from any port and for any
vlan containing this wild card mac address as destination address
and for which there is no static filtering information are allowed
to be forwarded."
INDEX { snMspsDot1qVlanWildCardMacAddress }
::= { snMspsDot1qVlanWildCardTable 1 }
SnMspsDot1qVlanWildCardEntry ::=
SEQUENCE {
snMspsDot1qVlanWildCardMacAddress
MacAddress,
snMspsDot1qVlanWildCardEgressPorts
PortList,
snMspsDot1qVlanWildCardRowStatus
RowStatus
}
snMspsDot1qVlanWildCardMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination MAC address in a frame to which this entry's
filtering information applies. This object must take the
value of a Unicast, Multicast or Broadcast address."
::= { snMspsDot1qVlanWildCardEntry 1 }
snMspsDot1qVlanWildCardEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports to which frames received from a specific port
and destined for dot1qFutureVlanWildCardMacAddress address must
be forwarded, if there is no specific static filtering entry
exist for this MAC."
::= { snMspsDot1qVlanWildCardEntry 2 }
snMspsDot1qVlanWildCardRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanWildCardEntry 3 }
snMspsMIDot1qVlanWildCardPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMIDot1qVlanWildCardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing ports to which frames received from a specific
port and destined for snMspsMIDot1qVlanWildCardMacAddress must be
forwarded, if there is no specific static filtering entry exist
for this MAC."
::= { snMspsVlan 20 }
snMspsMIDot1qVlanWildCardPortEntry OBJECT-TYPE
SYNTAX SnMspsMIDot1qVlanWildCardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WildCard vlan filtering Information configured into device by
management specifying set of ports to which frames received
from any port and for any vlan containing
snMspsMIDot1qVlanWildCardMacAddress mac address as destination
address and for which there is no static filtering information
are allowed to be forwarded."
INDEX { snMspsDot1qVlanWildCardMacAddress,
snMspsDot1qTpPort }
::= { snMspsMIDot1qVlanWildCardPortTable 1 }
SnMspsMIDot1qVlanWildCardPortEntry ::=
SEQUENCE {
snMspsMIDot1qVlanIsWildCardEgressPort
TruthValue
}
snMspsMIDot1qVlanIsWildCardEgressPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is an egress port of wildcard entry."
::= { snMspsMIDot1qVlanWildCardPortEntry 1 }
-- SCALAR BEGIN
-- snMspsVlan 21-24 reserved
snMspsDot1qVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the Vlan
feature. The value enabled(1) indicates that Vlan should be enabled
in the device on all ports. The value disabled(2) indicates that
Vlan should be disabled in the device on all ports. The object can
be set to disabled if and only if, dot1qGvrpStatus and dot1dGmrpStatus
are disabled. The object should NOT be enabled before setting
'dot1qVlanType'.
Setting this object will affect the operational status of the
VLAN module (dot1qFutureVlanOperStatus)."
::= { snMspsVlan 25 }
snMspsDot1qVlanMacBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only used to enable/disable the mac based type on all ports
of dot1qVlanPortMacBasedClassification"
::= { snMspsVlan 26 }
snMspsDot1qVlanPortProtoBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only used to enable/disable the port protocol based type on all ports
of snMspsDot1qVlanPortPortProtoBasedClassification"
::= { snMspsVlan 27 }
-- snMspsVlan 28 reserved
snMspsDot1qVlanShutdownStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative shutdown status requested by management for Vlan
The value true(1) indicates that Vlan should be shutdown
in the device on all ports. All memory will be released.
The value false(2) indicates that Vlan should be active in the device
on all ports."
DEFVAL { false }
::= { snMspsVlan 29 }
snMspsDot1qVlanBaseBridgeMode OBJECT-TYPE
SYNTAX INTEGER {
dot1dTransparentMode(1),
dot1qVlanMode(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates base bridge mode of the device.
Setting the value to transparent mode will make
switch behave according to IEEE 802.1D implementation.
Setting the value to VLAN mode will make switch behave
according to IEEE 802.1Q implementation"
::= { snMspsVlan 30 }
-- snMspsVlan 31-32 reserved
snMspsDot1qVlanLearningMode OBJECT-TYPE
SYNTAX INTEGER {
ivl(1),
svl(2),
hybrid(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of VLAN learning mode.
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
associated with old fid will get deleted."
DEFVAL { ivl }
::= { snMspsVlan 33 }
snMspsDot1qVlanHybridTypeDefault OBJECT-TYPE
SYNTAX INTEGER {
ivl(1),
svl(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default learning mode of the switch if
dot1qVlanLearningMode is hvl (3).
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
associated with old fid will get deleted."
DEFVAL { ivl }
::= { snMspsVlan 34 }
snMspsDot1qVlanOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the Vlan module.
The value enabled(1) indicates that Vlan module is currently enabled
in the device.
The value disabled(2) indicates that Vlan module is currently disabled
in the device."
::= { snMspsVlan 35 }
snMspsDot1qGvrpOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module is currently disabled
in the device."
::= { snMspsVlan 36 }
snMspsDot1qGmrpOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the GMRP module.
The value enabled(1) indicates that GMRP module is currently enabled
in the device.
The value disabled(2) indicates that GMRP module is currently disabled
in the device."
::= { snMspsVlan 37 }
--snMspsVlan 38-40 reserved
-- ----------------------------------------------------------------------------
-- Vlan Port Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing the port type information."
::= { snMspsVlan 41 }
snMspsDot1qVlanPortEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the type of the port."
INDEX { snMspsDot1qVlanPort }
::= { snMspsDot1qVlanPortTable 1 }
SnMspsDot1qVlanPortEntry ::=
SEQUENCE {
snMspsDot1qVlanPort Integer32,
snMspsDot1qVlanPortType INTEGER,
snMspsDot1qVlanPortMacBasedClassification EnabledStatus,
snMspsDot1qVlanPortPortProtoBasedClassification EnabledStatus,
snMspsDot1qVlanFilteringUtilityCriteria INTEGER,
snMspsDot1qVlanPortProtected TruthValue,
snMspsDot1qVlanPortSubnetBasedClassification EnabledStatus
}
snMspsDot1qVlanPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of the port for which this entry applies."
::= { snMspsDot1qVlanPortEntry 1 }
snMspsDot1qVlanPortType OBJECT-TYPE
SYNTAX INTEGER {
accessPort (1),
trunkPort (2),
hybridPort (3),
hostPort (4),
promiscuousPort (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the port is by default hybrid port.
When configured as access port, the port can accept and send
only untagged frames.
When configured as a trunk port, port is added as
member of all the existing Vlans and also for any new vlan
created.
When configured as hybrid port, the port can send or accept both
tagged and untagged frames.
hostPort, promiscuousPort are types of port in PVLAN domain.
Behaviour of host port varies based on the secondary vlan to which
it is configured as member port.
If a host port is a member port of an isolated VLAN, traffic from the
host port is sent only to the promiscuous port of the Private VLAN and
the trunk port.
If a host port is a member port of the community VLAN, traffic from the
port can be sent only to other ports of the community VLAN , trunk port
and promiscuous port of the private VLAN.
A host port can be associated with only one secondary vlan and with
the associated primary vlan.
The PVID of host port will be set the ID of the secondary vlan
to which it belongs to.If a host port is member port of primary vlan,
but is not member port of any secondary vlan, then its PVID will be
set to primary vlan id.
When a port is configured as a hostPort or promiscuousPort, ingress
filtering will be enabled on that port. Also ingress filtering
cannot be disabled on hostPort and promiscuousPort.
Promiscuous ports should be configured as member port of primary vlan
and member port of all secondary vlans associated with that
primary vlan.
The PVID of promiscuous port will be set as the ID of the primary
vlan to which it belongs to.
Host and promiscuous ports should be configured as untagged members
of primary/secondary vlans.
When a access/hybrid port is configured as a member port of a
primary/secondary vlan, it becomes a hostPort automatically.
When the type of the port is changed from promiscuous/host to
access/hybrid port, the port gets removed from the associated PVLAN
domain.
Only considered if device supports corresponding functionality,
otherwise set operation will fail with an inconsistentValue error."
DEFVAL { hybridPort }
::= { snMspsDot1qVlanPortEntry 2 }
snMspsDot1qVlanPortMacBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the Mac based Classification
on port. This can be independently set without
any dependency in available configuration of
snMspsDot1qVlanMacBasedOnAllPorts "
::= { snMspsDot1qVlanPortEntry 3 }
snMspsDot1qVlanPortPortProtoBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the port and protocol
Classification on port. This can be independently set without
any dependency in available configuration of
snMspsDot1qVlanPortProtoBasedOnAllPorts "
::= { snMspsDot1qVlanPortEntry 4 }
snMspsDot1qVlanFilteringUtilityCriteria OBJECT-TYPE
SYNTAX INTEGER {
default (1),
enhanced (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Based on this object, learning on a port is decided.
If default filtering utility Criteria is selected on a port, then
learning of source mac from a received packet on that port will be
done only if there is atleast on member port in that vlan.
If enhanced filtering utility criteria is selected on a port,then
learning of source mac from a received packet on that port will be
done if the following are satisfied:
- if at least one VLAN that uses the FID includes the reception
Port and at least one other Port with a Port State of Learning or
Forwarding in its member set, and:
o The operPointToPointMAC parameter is false for the reception Port; or
o Ingress to the VLAN is permitted through a third Port.
The third port can, but is not required to, be in the member set."
DEFVAL { default }
::= { snMspsDot1qVlanPortEntry 5 }
snMspsDot1qVlanPortProtected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Split Horizon property of the port. If set to true, frames that
are received on any other port that has the same property set to true,
will not be forwarded on this port."
DEFVAL { false }
::= { snMspsDot1qVlanPortEntry 6 }
snMspsDot1qVlanPortSubnetBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the Subnet based Vlan Classification
on port. This can be independently set without any dependency in
available configuration of snMspsDot1qVlanSubnetBasedOnAllPorts. This
object is not used in case of BCM chipsets."
::= { snMspsDot1qVlanPortEntry 7 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Port Table
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- Vlan Mac Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortMacMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortMacMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information on Vlan-MAC address
mapping."
::= { snMspsVlan 42 }
snMspsDot1qVlanPortMacMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortMacMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-MAC address mapping."
INDEX { snMspsDot1qVlanPort, snMspsDot1qVlanPortMacMapAddr }
::= { snMspsDot1qVlanPortMacMapTable 1 }
SnMspsDot1qVlanPortMacMapEntry ::=
SEQUENCE {
snMspsDot1qVlanPortMacMapAddr MacAddress,
snMspsDot1qVlanPortMacMapVid VlanId,
snMspsDot1qVlanPortMacMapName DisplayString,
snMspsDot1qVlanPortMacMapMcastBcastOption INTEGER,
snMspsDot1qVlanPortMacMapRowStatus RowStatus
}
snMspsDot1qVlanPortMacMapAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mac address for which the Vlan mapping is present in the entry."
::= { snMspsDot1qVlanPortMacMapEntry 1 }
snMspsDot1qVlanPortMacMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the mac address of this entry is mapped to."
::= { snMspsDot1qVlanPortMacMapEntry 2 }
snMspsDot1qVlanPortMacMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name given to the mac-vlan entry."
::= { snMspsDot1qVlanPortMacMapEntry 3 }
snMspsDot1qVlanPortMacMapMcastBcastOption OBJECT-TYPE
SYNTAX INTEGER { allow(1), suppress(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configurable option for discarding/allowing Multicast/Broadcast Untagged
frames. The value allow (1) indicates that Multicast/Broadcast frames
with source Mac address as in the Mac Vlan entry will be dropped if mac
based vlan is enabled on that port.The value suppress (2) indicates that
Multicast/Broadcast frames with source Mac address as in the Mac Vlan
entry will be processed if mac based vlan is enabled on that port"
DEFVAL { allow }
::= { snMspsDot1qVlanPortMacMapEntry 4 }
snMspsDot1qVlanPortMacMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanPortMacMapEntry 5 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Mac Map Table
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- Vlan Vlan-Fid Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanFidMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanFidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the Filtering database identifier
(FID) used by vlan's to make forwarding decisions. Vlan's can be mapped
to use the same FID to share filtering information among them. This will
cause the mapped vlan's to operate in shared vlan learning (SVL) mode.
Vlan's mapped to a unique FID will operate in independent vlan learning
mode (IVL). A SET operation on this table is allowed only when
snMspsDotVlanLearningMode is hybrid. By default all vlan's will be
mapped to the FID equal to their vlan id when
snMspsDotVlanHybridTypeDefault is IVL. If the value of
snMspsDotVlanHybridTypeDefault is SVL all vlan's are mapped to
filtering database id 1."
::= { snMspsVlan 43 }
snMspsDot1qVlanFidMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanFidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry mapping VlanId to Filtering database id."
INDEX { snMspsDot1qVlanIndex }
::= { snMspsDot1qVlanFidMapTable 1 }
SnMspsDot1qVlanFidMapEntry ::=
SEQUENCE {
snMspsDot1qVlanIndex Unsigned32,
snMspsDot1qVlanFid Unsigned32
}
snMspsDot1qVlanIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID for which filtering database information is available."
::= { snMspsDot1qVlanFidMapEntry 1 }
snMspsDot1qVlanFid OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Filtering database id (FID) that will be used by the vlan."
::= { snMspsDot1qVlanFidMapEntry 2 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Vlan-Fid Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN."
::= { snMspsVlan 44 }
snMspsDot1qVlanCounterEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains the VLAN statistics"
INDEX { snMspsDot1qVlanIndex }
::= { snMspsDot1qVlanCounterTable 1 }
SnMspsDot1qVlanCounterEntry ::=
SEQUENCE {
snMspsDot1qVlanCounterRxUcast Counter32,
snMspsDot1qVlanCounterRxMcastBcast Counter32,
snMspsDot1qVlanCounterTxUnknUcast Counter32,
snMspsDot1qVlanCounterTxUcast Counter32,
snMspsDot1qVlanCounterTxBcast Counter32
}
snMspsDot1qVlanCounterRxUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of unicast packets received in this VLAN."
::= { snMspsDot1qVlanCounterEntry 1 }
snMspsDot1qVlanCounterRxMcastBcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of multicast/broadcast packets received in this VLAN."
::= { snMspsDot1qVlanCounterEntry 2 }
snMspsDot1qVlanCounterTxUnknUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of unknown unicast packets flooded in this VLAN."
::= { snMspsDot1qVlanCounterEntry 3 }
snMspsDot1qVlanCounterTxUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of known unicast packets forwarded in this VLAN."
::= { snMspsDot1qVlanCounterEntry 4 }
snMspsDot1qVlanCounterTxBcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of broadcast packets forwarded in this VLAN."
::= { snMspsDot1qVlanCounterEntry 5 }
snMspsDot1qVlanUnicastMacControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanUnicastMacControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per VLAN Unicast MAC address control information.
The control information includes the status of unicast MAC address
learning as well as restricting the number of unique entries learnt to
a specified limit for the specified VLAN."
::= { snMspsVlan 45 }
snMspsDot1qVlanUnicastMacControlEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanUnicastMacControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling the number of distinct unicast MAC addresses
that can be learnt by a VLAN depending on whether learning is enabled
or disabled for the specified VLAN."
INDEX { snMspsDot1qVlanIndex }
::= { snMspsDot1qVlanUnicastMacControlTable 1 }
SnMspsDot1qVlanUnicastMacControlEntry ::=
SEQUENCE {
snMspsDot1qVlanUnicastMacLimit Unsigned32,
snMspsDot1qVlanAdminMacLearningStatus EnabledStatus,
snMspsDot1qVlanOperMacLearningStatus EnabledStatus
}
snMspsDot1qVlanUnicastMacLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Limiting value on the number of distinct unicast MAC addresses
learnt in a VLAN. The lower limit and upper limit value that
can be SET for this object is determined by the underlying hardware."
::= { snMspsDot1qVlanUnicastMacControlEntry 1 }
snMspsDot1qVlanAdminMacLearningStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Truth value used to configure the unicast MAC learning Admin status
for the VLAN to either be enabled (1) or disabled (2)."
DEFVAL { enabled }
::= { snMspsDot1qVlanUnicastMacControlEntry 2 }
snMspsDot1qVlanOperMacLearningStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Truth value indicating the unicast MAC learning enabled/disabled
Operational status for the specified VLAN.
If the VLAN does not have any member port, then the Mac Learning
Status for this VLAN will always be disabled, otherwise
The Mac Learning status for this VLAN will take value from Admin Mac
Learning status."
::= { snMspsDot1qVlanUnicastMacControlEntry 3 }
snMspsDot1qVlanTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extention to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame."
REFERENCE
""
::= { snMspsVlan 46 }
snMspsDot1qVlanTpFdbEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the pseudowire on which MAC address was
learned"
AUGMENTS { dot1qTpFdbEntry }
::= { snMspsDot1qVlanTpFdbTable 1 }
SnMspsDot1qVlanTpFdbEntry ::=
SEQUENCE {
snMspsDot1qVlanTpFdbPw
Unsigned32,
snMspsDot1qTpOldFdbPort
INTEGER,
snMspsDot1qConnectionIdentifier
MacAddress
}
snMspsDot1qVlanTpFdbPw OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the pseudowire number on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the entry was
learned via the layer2 port. Non-zero value indicates
that this value must be used for forwading irrespective
of dot1qTpFdbPort"
::= { snMspsDot1qVlanTpFdbEntry 1 }
snMspsDot1qTpOldFdbPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is useful for generating the source relearning trap.
When a get is performed on this object, it returns the value of
Zero(0), so that the device walk doesn't break. It indicates the port
through which the mac-address was learnt previously, while generating
the source relearning trap."
::= { snMspsDot1qVlanTpFdbEntry 2 }
snMspsDot1qConnectionIdentifier OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is to associate the backbone MAC address of the peer
backbone edge brige with customer Mac addresses that can be reached
through the peer backbone edge bridge."
::= { snMspsDot1qVlanTpFdbEntry 3 }
snMspsDot1qVlanPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to configure VLAN priorization"
::= { snMspsVlan 47 }
snMspsDot1qVlanPriorityEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION""
INDEX { snMspsDot1qVlanPriorityVid}
::= {snMspsDot1qVlanPriorityTable 1 }
SnMspsDot1qVlanPriorityEntry ::= SEQUENCE {
snMspsDot1qVlanPriorityVid INTEGER,
snMspsDot1qVlanPriorityEnabled INTEGER,
snMspsDot1qVlanPriority INTEGER
}
snMspsDot1qVlanPriorityVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "VLAN-ID"
::= { snMspsDot1qVlanPriorityEntry 1 }
snMspsDot1qVlanPriorityEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable forcing of a given priority for all
frames received on a certain VLAN"
DEFVAL { disabled }
::= { snMspsDot1qVlanPriorityEntry 4 }
snMspsDot1qVlanPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Priority that is forced for all frames received on a certain VLAN"
DEFVAL {0}
::= { snMspsDot1qVlanPriorityEntry 7 }
snMspsDot1qVlanExt OBJECT IDENTIFIER ::= { snMspsVlan 48 }
-- snMspsDot1qVlanExt 1-19 reserved for scalar
-- ----------------------------------------------------------------------------
-- MSPS Vlan Extension Table
-- ----------------------------------------------------------------------------
snMspsDot1qStVlanExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qStVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extension to dot1qVlanStaticTable VLAN table.
This table contains the Private Vlan (PVLAN) related
configurations.
Only considered if device supports corresponding functionality,
otherwise any set operation will fail with an inconsistentValue error
and get will return empty.
Entries cannot be created or deleted by user, whenever static vlan
entry created in the table 'dot1qVlanStaticTable' user can configure
corresponding private vlan properties in this table."
::= { snMspsDot1qVlanExt 20 }
snMspsDot1qStVlanExtEntry OBJECT-TYPE
SYNTAX SnMspsDot1qStVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies the Private Vlan configuration done for
a given Vlan."
INDEX { dot1qVlanIndex }
::= { snMspsDot1qStVlanExtTable 1 }
SnMspsDot1qStVlanExtEntry ::=
SEQUENCE {
snMspsDot1qStVlanPVlanType INTEGER,
snMspsDot1qStVlanPrimaryVid VlanIdOrNone
}
snMspsDot1qStVlanPVlanType OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
primary (2),
isolated (3),
community (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the Private vlan type for this vlan.
normal - Vlan does not belong to any Private VLAN domain.
primary - Primary vlan in a Private VLAN domain.
isolated - Isolated vlan in a Private VLAN domain.
Devices connected to host ports of this vlan, can not
communicate with each other.
For every isolated vlan, one primary vlan id should be
configured.
community - Community Vlan in a Private VLAN domain. Layer 2
behaviour for a community and normal vlan is same.
For every community vlan, one primary vlan id should be
configured.
Configuration of this object is allowed only when VLAN is not
active."
DEFVAL { normal }
::= { snMspsDot1qStVlanExtEntry 1 }
snMspsDot1qStVlanPrimaryVid OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the primary vlan assoicated with this
vlan.
For primary and normal vlans, this object will have the value zero
and configuring this object to non-zero value will not be allowed for
them.
For secondary vlans, this object identifies the associated
primary vlan."
DEFVAL { 0 }
::= { snMspsDot1qStVlanExtEntry 2 }
snMspsDot1vObjects OBJECT IDENTIFIER ::= { snMspsVlan 49 }
snMspsDot1vProtocolGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1vProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains mappings from Protocol
Templates to Protocol Group Identifiers used for
Port-and-Protocol-based VLAN Classification."
REFERENCE
"IEEE 802.1v clause 8.6.4"
::= { snMspsDot1vObjects 1 }
snMspsDot1vProtocolGroupEntry OBJECT-TYPE
SYNTAX SnMspsDot1vProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping from a Protocol Template to a Protocol
Group Identifier."
INDEX { snMspsDot1vProtocolTemplateFrameType,
snMspsDot1vProtocolTemplateProtocolValue,
snMspsDot1vProtocolGroupId}
::= { snMspsDot1vProtocolGroupTable 1 }
SnMspsDot1vProtocolGroupEntry ::=
SEQUENCE {
snMspsDot1vProtocolTemplateFrameType
INTEGER,
snMspsDot1vProtocolTemplateProtocolValue
OCTET STRING,
snMspsDot1vProtocolGroupId
Integer32,
snMspsDot1vProtocolGroupRowStatus
RowStatus
}
snMspsDot1vProtocolTemplateFrameType OBJECT-TYPE
SYNTAX INTEGER {
ethernet (1),
rfc1042 (2),
snap8021H (3),
snapOther (4),
llcOther (5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The data-link encapsulation format or the
'detagged_frame_type' in a Protocol Template."
REFERENCE
"IEEE 802.1v clause 8.6.2"
::= { snMspsDot1vProtocolGroupEntry 1 }
snMspsDot1vProtocolTemplateProtocolValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2 | 5))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identification of the protocol above the data-link
layer in a Protocol Template. Depending on the
frame type, the octet string will have one of the
following values:
For 'ethernet', 'rfc1042' and 'snap8021H',
this is the 16-bit (2-octet) IEEE 802.3 Type Field.
For 'snapOther',
this is the 40-bit (5-octet) PID.
For 'llcOther',
this is the 2-octet IEEE 802.2 LSAP pair:
first octet for DSAP and second octet for SSAP."
REFERENCE
"IEEE 802.1v clause 8.6.2"
::= { snMspsDot1vProtocolGroupEntry 2 }
snMspsDot1vProtocolGroupId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a group of protocols that are associated
together when assigning a VID to a frame."
REFERENCE
"IEEE 802.1v clause 8.6.3, 12.10.2.1"
::= { snMspsDot1vProtocolGroupEntry 3 }
snMspsDot1vProtocolGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { snMspsDot1vProtocolGroupEntry 4 }
-- snMspsVlan 50 reserved
snMspsVlanTunnelObjects OBJECT IDENTIFIER ::= { snMspsVlan 51 }
-- TUNNEL SCALAR BEGIN
snMspsVlanTunnelBpduPri OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the default User Priority for all the tunneled Layer 2
BPDU's received on tunnel ports."
DEFVAL { 7 }
::= { snMspsVlanTunnelObjects 1 }
snMspsVlanTunnelStpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for Customer STP BPDUs tunneling.
When STP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer BPDUs received.
This is the default behaviour in Provider (Q-in-Q) Bridges and customer
bridges. In case of 802.1ad bridges, this will be done only when the
outgoing port type is proprietary PNP.
Inside a given Network,BPDUs received with this MAC address will be
treated as data packets and not processed. This is the default
behaviour in case of Provider (Q-in-Q) Bridges and customer bridges.
In case of 802.1ad Bridges, when the outgoing port type is not
proprietary PNP, the destination address will be replaced with the
reserved address defined for customer STP BPDU.Otherwise, they will
be treated as data packets.
When the BPDU is sent out of the given Network, this MAC address
will be replaced with the reserved address defined for Customer STP
BPDU. This is done only when when STP protocol tunnel status is set to
Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 2 }
snMspsVlanTunnelLacpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for LACP packets tunneling . When
LACP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the LACP packets
received over this port.
LACP packets received with this MAC address will be treated as
data packets and not processed.
When the tunneled LACP packets are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for LACP packets. This is done only when LACP protocol tunnel status
is set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 3 }
snMspsVlanTunnelDot1xAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for Dot1x packets tunneling.
When Dot1x tunneling is enabled on a port, this MAC address will
be used as the the destination MAC address for the customer Dot1x
packets received with reserved address over this port.
Dot1x packets received with this MAC address will be treated as
data packets and not processed.
When the tunneled Dot1x packets are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for Dot1x packets. This is done only when Dot1x protocol tunnel
status is set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 4 }
snMspsVlanTunnelGvrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for GVRP PDUs tunneling.
When GVRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GVRP PDUs
received.This is the default behaviour in Provider (Q-in-Q) Bridges and
customer bridges. In case of 802.1ad bridges, this will be done only
when the outgoing port type is proprietary PNP.
Inside a given Network,packets received with this MAC address will be
treated as data packets and not processed. This is the default
behaviour in case of Provider (Q-in-Q) Bridges and customer bridges.
In case of 802.1ad Bridges, when the outgoing port type is not
proprietary PNP, the destination address will be replaced with the
reserved address defined for customer GVRP PDUs.Otherwise, they
will be treated as data packets.
When the GVRP PDU is sent out of the given Network, this MAC address
will be replaced with the reserved address defined for Customer GVRP
PDU. This is done only when when GVRP protocol tunnel status is set to
Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 5 }
snMspsVlanTunnelGmrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for GMRP PDUs tunneling.
When GMRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GMRP PDUs
received over this port.
Inside a given Network, GMRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled GMRP PDUs are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for GMRP PDUs.This is done only when GMRP protocol tunnel status is
set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 6 }
snMspsVlanTunnelMvrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for MVRP PDUs tunneling.
When MVRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the received MVRP PDUs.
Inside a given Network, packets received with this MAC address will be
treated as data packets and not processed. This is the default
behaviour in case of Provider (Q-in-Q) Bridges and customer bridges.
In case of 802.1ad Bridges, when the outgoing port type is not
proprietary PNP, the destination address will be replaced with the
reserved address defined for customer MVRP PDUs.Otherwise, they
will be treated as data packets.
When the MVRP PDU is sent out of the given Network, this MAC address
will be replaced with the reserved address defined for Customer MVRP
PDU. This is done only when when MVRP protocol tunnel status is set to
Tunnel on the outgoing port. Dropped otherwise."
::= { snMspsVlanTunnelObjects 10 }
snMspsVlanTunnelMmrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The MAC address to be used for MMRP PDUs tunneling.
When MMRP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the MMRP PDUs received
over this port.
Inside a given Network, MMRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled MMRP PDUs are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for MMRP PDUs.This is done only when MMRP protocol tunnel status is
set to Tunnel on the outgoing port.Dropped otherwise."
::= { snMspsVlanTunnelObjects 11 }
snMspsVlanTunnelIgmpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address to be used for IGMP packets tunneling . When
IGMP tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the IGMP packets
received over this port.
IGMP packets received with this MAC address will be treated as
data packets and not processed.
When the tunneled IGMP packets are sent out of the given Network,
this MAC address will be replaced with the reserved address defined
for IGMP packets. This is done only when IGMP protocol tunnel status
is set to Tunnel on the outgoing port."
::= { snMspsVlanTunnelObjects 12 }
-- TUNNEL SCALAR END
-- ----------------------------------------------------------------------------
-- Vlan Tunnel Table
-- ----------------------------------------------------------------------------
snMspsVlanTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the tunnel ports. A walk on
this table will show only those interfaces that are configured for
tunneling.
This table is supported only when the Bridge is configured in Provider
Bridge (Q-in-Q) mode."
::= { snMspsVlanTunnelObjects 7 }
snMspsVlanTunnelEntry OBJECT-TYPE
SYNTAX SnMspsVlanTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the tunnel information of the port."
INDEX { snMspsVlanPort }
::= { snMspsVlanTunnelTable 1 }
SnMspsVlanTunnelEntry ::=
SEQUENCE {
snMspsVlanPort Integer32,
snMspsVlanTunnelStatus EnabledStatus
}
snMspsVlanPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system."
::= { snMspsVlanTunnelEntry 1 }
snMspsVlanTunnelStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Tunnelling is enabled or disabled on this port.
snMspsVlanTunnelStatus can be set to `enabled` if and only if the
Bridge mode is set to be `Provider Bridge Mode` and VLAN port
type is set to 'accessPort'. Tunnelling can be enabled only on ports
which are in 'dot1x force-authorised' state."
DEFVAL { disabled }
::= { snMspsVlanTunnelEntry 2 }
-- ----------------------------------------------------------------
-- Tunnel protocol configuration table
-- ----------------------------------------------------------------
snMspsVlanTunnelProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the handling (Tunnel/Peer/
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/
IGMP/MVRP and MMRP) inside a given network."
::= { snMspsVlanTunnelObjects 8 }
snMspsVlanTunnelProtocolEntry OBJECT-TYPE
SYNTAX SnMspsVlanTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port.
Tunnel Status cannot be set to `tunnel/discard`, if the protocol
is enabled on the port.Exception, Igmp and dot1x should be disabled
globally for setting the tunnel status to `tunnel/discard`."
INDEX { snMspsVlanPort }
::= { snMspsVlanTunnelProtocolTable 1 }
SnMspsVlanTunnelProtocolEntry ::=
SEQUENCE {
snMspsVlanTunnelProtocolDot1x TunnelStatus,
snMspsVlanTunnelProtocolLacp TunnelStatus,
snMspsVlanTunnelProtocolStp TunnelStatus,
snMspsVlanTunnelProtocolGvrp TunnelStatus,
snMspsVlanTunnelProtocolGmrp TunnelStatus,
snMspsVlanTunnelProtocolIgmp TunnelStatus,
snMspsVlanTunnelProtocolMvrp TunnelStatus,
snMspsVlanTunnelProtocolMmrp TunnelStatus
}
snMspsVlanTunnelProtocolDot1x OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the Dot1x packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 1 }
snMspsVlanTunnelProtocolLacp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the LACP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 2 }
snMspsVlanTunnelProtocolStp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the STP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 3 }
snMspsVlanTunnelProtocolGvrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GVRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 4 }
snMspsVlanTunnelProtocolGmrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GMRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 5 }
snMspsVlanTunnelProtocolIgmp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the IGMP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 6 }
snMspsVlanTunnelProtocolMvrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the MVRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 7 }
snMspsVlanTunnelProtocolMmrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the MMRP packets
received on this port."
::= { snMspsVlanTunnelProtocolEntry 8 }
-- ----------------------------------------------------------------
-- Tunnel protocol statistics table
-- ----------------------------------------------------------------
snMspsVlanTunnelProtocolStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics information about the tunneled
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP)
received and transmitted over a port."
::= { snMspsVlanTunnelObjects 9 }
snMspsVlanTunnelProtocolStatsEntry OBJECT-TYPE
SYNTAX SnMspsVlanTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port."
INDEX { snMspsVlanPort }
::= { snMspsVlanTunnelProtocolStatsTable 1 }
SnMspsVlanTunnelProtocolStatsEntry ::=
SEQUENCE {
snMspsVlanTunnelProtocolDot1xPktsRecvd Counter32,
snMspsVlanTunnelProtocolDot1xPktsSent Counter32,
snMspsVlanTunnelProtocolLacpPktsRecvd Counter32,
snMspsVlanTunnelProtocolLacpPktsSent Counter32,
snMspsVlanTunnelProtocolStpPDUsRecvd Counter32,
snMspsVlanTunnelProtocolStpPDUsSent Counter32,
snMspsVlanTunnelProtocolGvrpPDUsRecvd Counter32,
snMspsVlanTunnelProtocolGvrpPDUsSent Counter32,
snMspsVlanTunnelProtocolGmrpPktsRecvd Counter32,
snMspsVlanTunnelProtocolGmrpPktsSent Counter32,
snMspsVlanTunnelProtocolIgmpPktsRecvd Counter32,
snMspsVlanTunnelProtocolIgmpPktsSent Counter32,
snMspsVlanTunnelProtocolMvrpPktsRecvd Counter32,
snMspsVlanTunnelProtocolMvrpPktsSent Counter32,
snMspsVlanTunnelProtocolMmrpPktsRecvd Counter32,
snMspsVlanTunnelProtocolMmrpPktsSent Counter32
}
snMspsVlanTunnelProtocolDot1xPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled Dot1x Packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 1 }
snMspsVlanTunnelProtocolDot1xPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled Dot1x Packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 2 }
snMspsVlanTunnelProtocolLacpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled LACP Packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 3 }
snMspsVlanTunnelProtocolLacpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled LACP packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 4 }
snMspsVlanTunnelProtocolStpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled STP PDUs received."
::= { snMspsVlanTunnelProtocolStatsEntry 5 }
snMspsVlanTunnelProtocolStpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled STP PDUs transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 6 }
snMspsVlanTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GVRP PDUs received."
::= { snMspsVlanTunnelProtocolStatsEntry 7 }
snMspsVlanTunnelProtocolGvrpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GVRP PDUs transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 8 }
snMspsVlanTunnelProtocolGmrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GMRP PDUs packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 9 }
snMspsVlanTunnelProtocolGmrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled GMRP packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 10 }
snMspsVlanTunnelProtocolIgmpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled IGMP packets received."
::= { snMspsVlanTunnelProtocolStatsEntry 11 }
snMspsVlanTunnelProtocolIgmpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunneled IGMP packets transmitted."
::= { snMspsVlanTunnelProtocolStatsEntry 12 }
snMspsVlanTunnelProtocolMvrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRPDUs received on a port for which the MVRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 13 }
snMspsVlanTunnelProtocolMvrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRPDUs transmitted on a port on which the MVRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 14 }
snMspsVlanTunnelProtocolMmrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRPDUs received on a port for which the MMRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 15 }
snMspsVlanTunnelProtocolMmrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRPDUs transmitted on a port on which the MMRP tunneling
status is enabled."
::= { snMspsVlanTunnelProtocolStatsEntry 16 }
snMspsVlanDiscardObjects OBJECT IDENTIFIER ::= { snMspsVlan 52 }
-- ----------------------------------------------------------------
-- VLAN Discard statistics table
-- ----------------------------------------------------------------
snMspsVlanDiscardStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVlanDiscardStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics information about the L2 protocol
packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on
reception and transmission side due to 'Discard' tunnel protocol
status."
::= { snMspsVlanDiscardObjects 1 }
snMspsVlanDiscardStatsEntry OBJECT-TYPE
SYNTAX SnMspsVlanDiscardStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Discard statistics for L2 protocol packets."
INDEX { snMspsVlanPort }
::= { snMspsVlanDiscardStatsTable 1 }
SnMspsVlanDiscardStatsEntry ::=
SEQUENCE {
snMspsVlanDiscardDot1xPktsRx Counter32,
snMspsVlanDiscardDot1xPktsTx Counter32,
snMspsVlanDiscardLacpPktsRx Counter32,
snMspsVlanDiscardLacpPktsTx Counter32,
snMspsVlanDiscardStpPDUsRx Counter32,
snMspsVlanDiscardStpPDUsTx Counter32,
snMspsVlanDiscardGvrpPktsRx Counter32,
snMspsVlanDiscardGvrpPktsTx Counter32,
snMspsVlanDiscardGmrpPktsRx Counter32,
snMspsVlanDiscardGmrpPktsTx Counter32,
snMspsVlanDiscardIgmpPktsRx Counter32,
snMspsVlanDiscardIgmpPktsTx Counter32,
snMspsVlanDiscardMvrpPktsRx Counter32,
snMspsVlanDiscardMvrpPktsTx Counter32,
snMspsVlanDiscardMmrpPktsRx Counter32,
snMspsVlanDiscardMmrpPktsTx Counter32
}
snMspsVlanDiscardDot1xPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dot1x packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 1 }
snMspsVlanDiscardDot1xPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dot1x packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 2 }
snMspsVlanDiscardLacpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LACP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 3 }
snMspsVlanDiscardLacpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LACP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 4 }
snMspsVlanDiscardStpPDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STP BPDUs discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 5 }
snMspsVlanDiscardStpPDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STP BPDUs discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 6 }
snMspsVlanDiscardGvrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GVRP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 7 }
snMspsVlanDiscardGvrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GVRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 8 }
snMspsVlanDiscardGmrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GMRP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 9 }
snMspsVlanDiscardGmrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of GMRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 10 }
snMspsVlanDiscardIgmpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 11 }
snMspsVlanDiscardIgmpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 12 }
snMspsVlanDiscardMvrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRP packets discarded on the reception side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 13 }
snMspsVlanDiscardMvrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 14 }
snMspsVlanDiscardMmrpPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRP packets discarded on the receiption side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 15 }
snMspsVlanDiscardMmrpPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MMRP packets discarded on the transmission side
due to Discard option."
::= { snMspsVlanDiscardStatsEntry 16 }
-- snMspsVlan 54-55 reserved
snMspsVlanBridgeMode OBJECT-TYPE
SYNTAX INTEGER {
customerBridge (1),
providerBridge (2),
providerEdgeBridge (3),
providerCoreBridge (4),
providerBackoneICompBridge (5),
providerBackoneBCompBridge (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Bridge mode of the switch.
Setting this to 'customerBridge' means that the switch will operate
as a 802.1Q VLAN Bridge.
Setting this to 'providerBridge' means that the Bridge will operate as
a normal Q-in-Q Bridge.
Setting this to 'providerCoreBridge' means that the switch will operate
as a 802.1ad compliant provider bridge with only S-VLAN component.
Setting this to 'providerEdgeBridge' means that the switch will operate
as a 802.1ad provider edge bridge with S-VLAN component and atleast
one C-VLAN component.
Setting this to 'providerBackoneICompBridge' means that the switch will operate
as a 802.1ah provider backone bridge as an I component.
Setting this to 'providerBackoneBCompBridge' means that the switch will operate
as a 802.1ah provider backone bridge as a B component.
For changing the bridge mode, GARP and STP modules should be shutdown."
::= { snMspsVlan 56 }
-- ----------------------------------------------------------------------------
-- Vlan Subnet Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortSubnetMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortSubnetMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
In case of BCM, the snMspsDot1qVlanPort index should always be 0 since
BCM supports Subnet based VLAN globally (not on per port)"
::= { snMspsVlan 57 }
snMspsDot1qVlanPortSubnetMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortSubnetMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-Subnet address mapping."
INDEX { snMspsDot1qVlanPort,
snMspsDot1qVlanPortSubnetMapAddr}
::= { snMspsDot1qVlanPortSubnetMapTable 1 }
SnMspsDot1qVlanPortSubnetMapEntry ::=
SEQUENCE {
snMspsDot1qVlanPortSubnetMapAddr IpAddress,
snMspsDot1qVlanPortSubnetMapVid VlanId,
snMspsDot1qVlanPortSubnetMapARPOption INTEGER,
snMspsDot1qVlanPortSubnetMapRowStatus RowStatus,
snMspsDot1qVlanPortSubnetMapSubnetMask IpAddress
}
snMspsDot1qVlanPortSubnetMapAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP-Subnet address for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortSubnetMapEntry 1 }
snMspsDot1qVlanPortSubnetMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the Source IP-Subnet address of this entry is mapped to."
::= { snMspsDot1qVlanPortSubnetMapEntry 2 }
snMspsDot1qVlanPortSubnetMapARPOption OBJECT-TYPE
SYNTAX INTEGER { allow(1), suppress(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configurable option for discarding/allowing ARP Untagged frames on
the vlan. The value allow (1) indicates that ARP frames with source
IP-subnet address matching the snMspsDot1qVlanPortSubnetMapEntry
will be classified to vlan based on snMspsDot1qVlanPortSubnetMapEntry.
The value suppress (2) indicates that ARP frames with source IP-Subnet
address matching the snMspsDot1qVlanPortSubnetMapEntry will not be
classified to vlan based on snMspsDot1qVlanPortSubnetMapEntry. The
VLAN classification will be based on next subsequent classification
mechanism."
DEFVAL { allow }
::= { snMspsDot1qVlanPortSubnetMapEntry 3 }
snMspsDot1qVlanPortSubnetMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanPortSubnetMapEntry 4 }
snMspsDot1qVlanPortSubnetMapSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source IP-Subnet Mask for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortSubnetMapEntry 5 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Subnet Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanSubnetBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the subnet based VLAN Classification
on all ports of snMspsDot1qVlanPortSubnetBasedClassification. On setting
this object to enable/disable status, Subnet based VLAN classification
will be enabled/disabled on all the ports."
::= { snMspsVlan 58 }
-- ----------------------------------------------------------------------------
-- Vlan Ipv6 Prefix Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanPortIpv6PrefixMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1qVlanPortIpv6PrefixMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ipv6 prefix based VLAN classification - The source Ipv6-prefix address in
the incoming packets is used to classify VLAN membership.
prefix based VLAN is applied only on Ipv6 packets.
This table contains information on Prefix-VlanId address mapping."
::= { snMspsVlan 59 }
snMspsDot1qVlanPortIpv6PrefixMapEntry OBJECT-TYPE
SYNTAX SnMspsDot1qVlanPortIpv6PrefixMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-Ipv6 prefix address mapping."
INDEX { snMspsDot1qVlanPort,
snMspsDot1qVlanPortIpv6PrefixMapAddr}
::= { snMspsDot1qVlanPortIpv6PrefixMapTable 1 }
SnMspsDot1qVlanPortIpv6PrefixMapEntry ::=
SEQUENCE {
snMspsDot1qVlanPortIpv6PrefixMapAddr OCTET STRING,
snMspsDot1qVlanPortIpv6PrefixMapAddrLength Integer32,
snMspsDot1qVlanPortIpv6PrefixMapVid VlanId,
snMspsDot1qVlanPortIpv6PrefixMapRowStatus RowStatus
}
snMspsDot1qVlanPortIpv6PrefixMapAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source Ipv6-prefix address for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 1 }
snMspsDot1qVlanPortIpv6PrefixMapAddrLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source Ipv6-prefix length for which the Vlan mapping is present
in the entry."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 2 }
snMspsDot1qVlanPortIpv6PrefixMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the Source Ipv6-prefix address of this entry is mapped to."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 3 }
snMspsDot1qVlanPortIpv6PrefixMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { snMspsDot1qVlanPortIpv6PrefixMapEntry 4 }
-- ----------------------------------------------------------------------------
-- END OF Vlan Ipv6 Prefix Map Table
-- ----------------------------------------------------------------------------
snMspsDot1qVlanAltMgmtAccessVlanList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Vlan's in which the Mgmt Ip address can be accessed.
By default the access is not allowed to reside in any vlan.
This entry will only be applicable if there is no L3 Vlan associated with
L2 Vlan."
::= { snMspsVlan 65 }
-- Textual Conventions
PriorityCodePoint ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"To specify the priority code point selection row"
SYNTAX INTEGER {
codePoint8p0d(1),
codePoint7p1d(2),
codePoint6p2d(3),
codePoint5p3d(4)
}
--MIB objects for configuring the IEEE802.1ad Provider Bridging
snMspsDot1adProviderBridge OBJECT IDENTIFIER ::= { snMspsDot1ad 1 }
--Proprietary MIB implementation for the Provider Bridging functionality
snMspsDot1adPbSystem OBJECT IDENTIFIER ::= { snMspsDot1ad 2 }
snMspsDot1adPbConfig OBJECT IDENTIFIER ::= { snMspsDot1ad 3 }
-- -------------------------------------------------------------
-- The 802.1ad Provider Bridge Port Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing provider bridge port related configurations.
All the values for the objects in this table will take effect
only when the Bridge Mode is set as
ProviderCoreBridge or ProviderEdgeBridge."
::= { snMspsDot1adProviderBridge 1 }
snMspsDot1adPortEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling per port configurations for
the externally accessible ports of Provider Bridges."
INDEX { snMspsDot1adPortNum }
::= { snMspsDot1adPortTable 1 }
SnMspsDot1adPortEntry ::=
SEQUENCE {
snMspsDot1adPortNum Integer32,
snMspsDot1adPortPcpSelectionRow PriorityCodePoint,
snMspsDot1adPortUseDei TruthValue,
snMspsDot1adPortReqDropEncoding TruthValue
}
snMspsDot1adPortNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system."
::= { snMspsDot1adPortEntry 1 }
snMspsDot1adPortPcpSelectionRow OBJECT-TYPE
SYNTAX PriorityCodePoint
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row to be used on this port for PCP encoding and PCP decoding
tables. PCP encoding and PCP decoding on a port will be based on the row
configured as per this mib object for this port. This can be set for all
bride port types."
DEFVAL { 1 }
::= { snMspsDot1adPortEntry 2 }
snMspsDot1adPortUseDei OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify whether drop_eligible parameter in the PCP can be
used for encoding and decoding.
If this object is set to True for the port, then drop_eligible parameter
will be encoded in the DEI of transmitted frames.If the DEI is set in the
S-tag or the PCP decoding table indicates that drop_eligible True,
then drop_eligible will become true for the received frames.
If this object is set to False, the DEI will be transmitted as zero
and ignored on receipt.
This object can be set only on PNPs and external CNPs."
DEFVAL { false }
::= { snMspsDot1adPortEntry 3 }
snMspsDot1adPortReqDropEncoding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to True and if the bridge port can not
encode particular priorities with drop_eligible, then frames queued
with those priorites and drop_eligible true can be discarded and not
transmitted.
This object can be set only on PNPs and external CNPs."
DEFVAL { false }
::= { snMspsDot1adPortEntry 4 }
-- ----------------------------------------------------------------
-- VID Translation Table
-- This is the VID translation table (Ref. IEEE802.1ad/D6 - Section
-- (12.13.2.1)
-- ----------------------------------------------------------------
snMspsDot1adVidTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adVidTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This VID Translation table provides a bidirectional mapping between a
Local S-VID and a relay S-VID. This table is applicable only for the
externally accessible network ports (ie) Customer Network Port / Provider
Network Port / Proprietary Customer Network Port."
::= { snMspsDot1adProviderBridge 2 }
snMspsDot1adVidTranslationEntry OBJECT-TYPE
SYNTAX SnMspsDot1adVidTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains the information of translating a Local Service Vlan
in the packet to the Relay Service VLAN. This entry shall only be
applicable at Network ports."
INDEX { snMspsDot1adPortNum,
snMspsDot1adVidTranslationLocalVid }
::= { snMspsDot1adVidTranslationTable 1 }
SnMspsDot1adVidTranslationEntry ::=
SEQUENCE {
snMspsDot1adVidTranslationLocalVid VlanId,
snMspsDot1adVidTranslationRelayVid VlanId,
snMspsDot1adVidTranslationRowStatus RowStatus
}
snMspsDot1adVidTranslationLocalVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A Service VLAN Identifier used in the S-Tag of frames transmitted
and received through this customer Network Port / Provider Network Port
/ Proprietary Customer Network Port."
::= { snMspsDot1adVidTranslationEntry 1 }
snMspsDot1adVidTranslationRelayVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This Service VLAN identifier used by the filtering and forwarding processes
of the S-VLAN component in the provider bridge. This Vlan is identified for
a given port (CNP/ Prop CNP/ PNP) and the specified Local S-VLAN present in
the frame"
::= { snMspsDot1adVidTranslationEntry 2 }
snMspsDot1adVidTranslationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.
The Entry in this table is used only when the translation status for a
Port (CNP/ PropCNP/PNP) is enabled and the Row status is SET 'active'."
::= { snMspsDot1adVidTranslationEntry 3 }
-- -------------------------------------------------------------
-- This table is the C-VID Registration table (Ref. Section
-- 12.13.3.1 IEEE802.1ad/D6)
-- -------------------------------------------------------------
snMspsDot1adCVidRegistrationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adCVidRegistrationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table provides a mapping between a customer VLAN Identifier (C-VID)
and service instance represented by Service VLAN identifier(S-VID)
for a customer edge port.
An Entry in this table result in 'cvlan' type of SVLAN classification for
CEP Ports. This can be configured only on Customer Edge Port."
::= { snMspsDot1adProviderBridge 3 }
snMspsDot1adCVidRegistrationEntry OBJECT-TYPE
SYNTAX SnMspsDot1adCVidRegistrationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An Entry in this table provides functionality of
a) Configuring PVID of the internal Customer Network Port of SVLAN component.
b) Adding PEP on the C-VLAN component to member set of C-VLAN
c) Adding PEP and/or CEP to the untagged set of C-VLAN, if it is desired."
INDEX { snMspsDot1adPortNum,
snMspsDot1adCVidRegistrationCVid
}
::= { snMspsDot1adCVidRegistrationTable 1 }
SnMspsDot1adCVidRegistrationEntry ::=
SEQUENCE {
snMspsDot1adCVidRegistrationCVid VlanId,
snMspsDot1adCVidRegistrationSVid VlanId,
snMspsDot1adCVidRegistrationUntaggedPep TruthValue,
snMspsDot1adCVidRegistrationUntaggedCep TruthValue,
snMspsDot1adCVidRegistrationRowStatus RowStatus
}
snMspsDot1adCVidRegistrationCVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The customer VLAN ID in the customer VLAN tag of an ingress frame
at this specified port or the customer VLAN ID to which the ingress
frame is classified to, at this specified port."
::= { snMspsDot1adCVidRegistrationEntry 1 }
snMspsDot1adCVidRegistrationSVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"S-VLAN Id for the service instance to which this port and this
C-VLAN are mapped to.
ie) CEP,C-VID ===> S-VID."
::= { snMspsDot1adCVidRegistrationEntry 2 }
snMspsDot1adCVidRegistrationUntaggedPep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to retain/add/remove the Customer VLAN tag
from the packet, before sending it out of Provider Edge Port (PEP).
When it is set to 'True' the C-VLAN tag will be stripped. Otherwise
the packet will be sent out with a C-tag and with valid C-VID."
DEFVAL { false }
::= { snMspsDot1adCVidRegistrationEntry 3 }
snMspsDot1adCVidRegistrationUntaggedCep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to retain/add/remove the Customer VLAN tag
from the packet, before sending it out of Customer Edge Port (CEP).
When it is set to 'True' the C-VLAN tag will be stripped. Otherwise
the tag will be added if the packet is C-VLAN untagged."
DEFVAL { false }
::= { snMspsDot1adCVidRegistrationEntry 4 }
snMspsDot1adCVidRegistrationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adCVidRegistrationEntry 5 }
-- ----------------------------------------------------------------
-- Provider Edge Port configuration table (Ref. IEEE802.1ad/D6 - Section
-- 12.13.3.3 and 12.13.3.4)
-- ----------------------------------------------------------------
snMspsDot1adPepTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table provides configuration options (PVID,Acceptable
frame type, default user priority and ingress filtering) for the internal
PEP interfaces created when an entry is created in C-VID registration table."
::= { snMspsDot1adProviderBridge 4 }
snMspsDot1adPepEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains information (PVID, Acceptable frame type, default user priority
and ingress filtering) for the packets received over internal PEPs.
Creation of an entry in this table is not allowed and only modification
is allowed."
INDEX {snMspsDot1adPortNum,
snMspsDot1adCVidRegistrationSVid
}
::= { snMspsDot1adPepTable 1 }
SnMspsDot1adPepEntry ::=
SEQUENCE {
snMspsDot1adPepPvid VlanId,
snMspsDot1adPepDefaultUserPriority INTEGER,
snMspsDot1adPepAccptableFrameTypes INTEGER,
snMspsDot1adPepIngressFiltering TruthValue
}
snMspsDot1adPepPvid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID to be used for the untagged packets received over this
PEP. This refers to the customer VLAN ID to which the untagged packets
received over this PEP will be classified. And this is the VLAN ID
put in the C-VLAN tag when the outgoing CEP is tagged i.e untagged CEP is
set to False for this port in the C-VID registration table entry."
::= { snMspsDot1adPepEntry 1 }
snMspsDot1adPepDefaultUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default ingress user priority to be used for the untagged
packets received over provider edge ports.This will be used for
the PCP encoding of C-VLAN tag for the outgoing packets when the
outgoing CEP is tagged i.e untagged CEP is set to False in the
C-VID registration table entry for this port."
DEFVAL { 0 }
::= { snMspsDot1adPepEntry 2 }
snMspsDot1adPepAccptableFrameTypes OBJECT-TYPE
SYNTAX INTEGER {
admitAll(1),
admitOnlyVlanTagged(2),
admitOnlyUntaggedAndPriorityTagged (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1) is set, all frames
tagged/untagged/priority tagged frames received on this port
will be accepted.
When admitOnlyUntaggedAndPriorityTagged(3) is set, untagged and
priority tagged frames alone will be accepted and tagged
frames received over this PEP will be discarded."
DEFVAL { admitAll }
::= { snMspsDot1adPepEntry 3 }
snMspsDot1adPepIngressFiltering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is true(1), if this port is not in the member set of a
C-VLAN, then frames received on this port classified to that C-VLAN
will be discarded. When false(2), the port will accept all
incoming frames received over this PEP"
DEFVAL { false }
::= { snMspsDot1adPepEntry 4 }
-- ----------------------------------------------------------------
-- Service Priority regeneration configuration table (Ref.
-- IEEE802.1ad/D6 - Section 12.13.3.5 and 12.13.3.6)
-- ----------------------------------------------------------------
snMspsDot1adServicePriorityRegenerationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adServicePriorityRegenerationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps each receive priority to a regenerated priority on
this internal customer network port.
Creation of an entry in this table is not allowed and only modification
is allowed.
An entry will be created in this table with default values for the
CEP and S-VLAN pair,when the corresponding entry is created in C-VID
registration table."
::= { snMspsDot1adProviderBridge 5 }
snMspsDot1adServicePriorityRegenerationEntry OBJECT-TYPE
SYNTAX SnMspsDot1adServicePriorityRegenerationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the mapping of incoming priority and regenerated
priority for internal customer network ports."
INDEX { snMspsDot1adPortNum,
snMspsDot1adCVidRegistrationSVid,
snMspsDot1adServicePriorityRegenReceivedPriority }
::= { snMspsDot1adServicePriorityRegenerationTable 1 }
SnMspsDot1adServicePriorityRegenerationEntry ::=
SEQUENCE {
snMspsDot1adServicePriorityRegenReceivedPriority INTEGER,
snMspsDot1adServicePriorityRegenRegeneratedPriority INTEGER
}
snMspsDot1adServicePriorityRegenReceivedPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The received priority value for a frame over the internal customer
network port. For tagged packets, this refers to the priority of C-tag
received over the CEPs.
For untagged packets, the default user priority of CEP will be used as
the receive priority."
::= { snMspsDot1adServicePriorityRegenerationEntry 1 }
snMspsDot1adServicePriorityRegenRegeneratedPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The regenerated priority value for the received priority for a frame
received over the internal customer network port. The PCP encoding
for the frames that are to be sent out will be based on the regenerated
priority value got from this object."
::= { snMspsDot1adServicePriorityRegenerationEntry 2 }
-- ----------------------------------------------------------------
-- PCP decoding table (Priority Code Point decoding table)
-- (Ref. IEEE802.1ad/D6 - section 12.6.2.8 and 12.6.2.9)
-- ----------------------------------------------------------------
snMspsDot1adPcpDecodingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPcpDecodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority and drop_eligible parameters of the received frames
are decoded from the PCP using Priority Code Point decoding table. For
each port, the PCP decoding table has eight entries corresponding to each
of the possible PCP values."
::= { snMspsDot1adProviderBridge 6 }
snMspsDot1adPcpDecodingEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPcpDecodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry contains the priority and drop_eligible information for
a particular port, PCP selection row and PCP value.
Creation of an entry in this table is not allowed and only modification
is permitted"
INDEX { snMspsDot1adPortNum,
snMspsDot1adPcpDecodingPcpSelRow,
snMspsDot1adPcpDecodingPcpValue
}
::= { snMspsDot1adPcpDecodingTable 1 }
SnMspsDot1adPcpDecodingEntry ::=
SEQUENCE {
snMspsDot1adPcpDecodingPcpSelRow PriorityCodePoint,
snMspsDot1adPcpDecodingPcpValue INTEGER,
snMspsDot1adPcpDecodingPriority INTEGER,
snMspsDot1adPcpDecodingDropEligible TruthValue
}
snMspsDot1adPcpDecodingPcpSelRow OBJECT-TYPE
SYNTAX PriorityCodePoint
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PCP selection row in the decoding table for which the priority and
drop eligible parameters are to be mapped for a given PCP value."
::= { snMspsDot1adPcpDecodingEntry 1 }
snMspsDot1adPcpDecodingPcpValue OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PCP value in the decoding table for which the priority and
drop eligible parameters are to be derived."
::= { snMspsDot1adPcpDecodingEntry 2 }
snMspsDot1adPcpDecodingPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority associated with the particular PCP and PCP selection row in
the PCP decoding table.This is the priority decoded for the PCP associated
with the received frame. The frame will further be processed with this
priority value."
::= { snMspsDot1adPcpDecodingEntry 3 }
snMspsDot1adPcpDecodingDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The drop_eligible value associated with the particular PCP and PCP
selection row in the PCP decoding table. When this is set to True,
frames should be discarded in preference to other frames with drop_eligible
False."
::= { snMspsDot1adPcpDecodingEntry 4 }
-- ----------------------------------------------------------------
-- PCP encoding table (Priority Code Point encoding table)
-- (Ref. IEEE802.1ad/D6 - section 12.6.2.10 and 12.6.2.11)
-- ----------------------------------------------------------------
snMspsDot1adPcpEncodingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPcpEncodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority and drop_eligible parameters are encoded in the Priority Code
Point field of the VLAN tag using the Priority Code Point encoding table
for the port. For each port, PCP encoding table has 16 entries, corresponding
to each of the possible combinations of the eight possible values of priority
and two possible values of drop_eligible."
::= { snMspsDot1adProviderBridge 7 }
snMspsDot1adPcpEncodingEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPcpEncodingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry contains the PCP value for a particular port,PCP selection
row, priority and drop_eligible value.
Creation of an entry in this table is not allowed and only modification
is permitted."
INDEX {snMspsDot1adPortNum,
snMspsDot1adPcpEncodingPcpSelRow,
snMspsDot1adPcpEncodingPriority,
snMspsDot1adPcpEncodingDropEligible
}
::= { snMspsDot1adPcpEncodingTable 1 }
SnMspsDot1adPcpEncodingEntry ::=
SEQUENCE {
snMspsDot1adPcpEncodingPcpSelRow PriorityCodePoint,
snMspsDot1adPcpEncodingPriority INTEGER,
snMspsDot1adPcpEncodingDropEligible TruthValue,
snMspsDot1adPcpEncodingPcpValue INTEGER
}
snMspsDot1adPcpEncodingPcpSelRow OBJECT-TYPE
SYNTAX PriorityCodePoint
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PCP selection row in the encoding table for which the the PCP value
to be mapped for a particular priority and drop_eligible combination."
::= { snMspsDot1adPcpEncodingEntry 1 }
snMspsDot1adPcpEncodingPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The priority associated with a particular PCP selection row.
Priority and drop_eligible combination for a particular port will
be mapped to a PCP valule."
::= { snMspsDot1adPcpEncodingEntry 2 }
snMspsDot1adPcpEncodingDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The drop_eligible parameter associated with a particular priority
and PCP selection row in the PCP encoding table."
::= { snMspsDot1adPcpEncodingEntry 3 }
snMspsDot1adPcpEncodingPcpValue OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value associated with the particular priority and drop_eligible
combination of the PCP selection row in PCP encoding table. This will be
encoded in the transmitted frames."
::= { snMspsDot1adPcpEncodingEntry 4 }
--Proprietary MIB implementation for the Provider Bridging functionality
snMspsDot1adPbContextInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbContextInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Provider Bridge related objects that can be configured
per Virtual Context in the system."
::= { snMspsDot1adPbSystem 1 }
snMspsDot1adPbContextInfoEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbContextInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual Context based Provider Bridge objects."
INDEX { snMspsDot1adPbContextId }
::= { snMspsDot1adPbContextInfoTable 1 }
SnMspsDot1adPbContextInfoEntry ::=
SEQUENCE {
snMspsDot1adPbContextId
Integer32,
snMspsDot1adPbMulticastMacLimit
Unsigned32,
snMspsDot1adPbTunnelStpAddress
MacAddress,
snMspsDot1adPbTunnelLacpAddress
MacAddress,
snMspsDot1adPbTunnelDot1xAddress
MacAddress,
snMspsDot1adPbTunnelGvrpAddress
MacAddress,
snMspsDot1adPbTunnelGmrpAddress
MacAddress
}
snMspsDot1adPbContextId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a Virtual Context."
::= { snMspsDot1adPbContextInfoEntry 1 }
snMspsDot1adPbMulticastMacLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Multicast MAC table size of the device. The size SET for
this object is applicable only for the Virtual Context identified
by the Virtual Context Id in this entry.The upper limit value
that can be SET for this object is limited by the underlying
hardware. While on initialisation this object hold the maximum
size of the Multicast MAC table of the device."
::= { snMspsDot1adPbContextInfoEntry 2 }
snMspsDot1adPbTunnelStpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for Customer STP BPDUs tunneling inside
Provider Network.
When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer BPDUs received
on a port where STP tunneling is enabled and the outgoing port is a
proprietary PNP.
Inside Provider Network, the BPDUs received with this MAC address
will be treated as data packets and not processed.
When the BPDU is sent out of the Provider Network, this MAC address
will be replaced with the reserved address defined for Customer STP
BPDUs.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 3 }
snMspsDot1adPbTunnelLacpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for LACP packets tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer LACP packets
received over this port.
Inside Provider Network, LACP packets received with this MAC address
will be treated as data packets and not processed.
When the tunneled LACP packets are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for LACP packets.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 4 }
snMspsDot1adPbTunnelDot1xAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for Dot1x packets tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer Dot1x packets
received over this port.
Inside Provider Network, Dot1x packets received with this MAC address
will be treated as data packets and not processed.
When the tunneled Dot1x packets are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for Dot1x packets.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 5 }
snMspsDot1adPbTunnelGvrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for GVRP PDUs tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GVRP PDUs
received on a port where GVRP tunneling is enable and the outgoing
port is a proprietary PNP.
Inside Provider Network, GVRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled GVRP PDUs are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for GVRP PDUs.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 6 }
snMspsDot1adPbTunnelGmrpAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MAC address SET for this object is applicable only for the
Virtual Context identified by the Virtual Context Id in this entry.
The MAC address to be used for GMRP PDUs tunneling inside Provider
Network. When tunneling is enabled on a port, this MAC address will be
used as the the destination MAC address of the customer GMRP PDUs
received over this port.
Inside Provider Network, GMRP PDUs received with this MAC address
will be treated as data packets and not processed.
When the tunneled GMRP PDUs are sent out of the Provider Network,
this MAC address will be replaced with the reserved address defined
for GMRP PDUs.
This configuration is allowed only for Provider Core or
Edge Bridges."
::= { snMspsDot1adPbContextInfoEntry 7 }
-- -------------------------------------------------------------
-- The Provider Bridge Port Type Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing provider bridge releated
configurations for the externally accessible ports.
All the objects in this table are applicable
only when the Bridge Mode is set as ProviderBridge or
ProviderCoreBridge or ProviderEdgeBridge."
::= { snMspsDot1adPbConfig 1 }
snMspsDot1adPbPortInfoEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table specifies the Provider Bridge related
port configurations. This table is indexed by ifIndex. "
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbPortInfoTable 1 }
SnMspsDot1adPbPortInfoEntry ::=
SEQUENCE {
snMspsDot1adPbPort Integer32,
snMspsDot1adPbPortSVlanClassificationMethod INTEGER,
snMspsDot1adPbPortSVlanIngressEtherType Integer32,
snMspsDot1adPbPortSVlanEgressEtherType Integer32,
snMspsDot1adPbPortSVlanEtherTypeSwapStatus EnabledStatus,
snMspsDot1adPbPortSVlanTranslationStatus EnabledStatus,
snMspsDot1adPbPortUnicastMacLearning EnabledStatus,
snMspsDot1adPbPortUnicastMacLimit Unsigned32
}
snMspsDot1adPbPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system."
::= { snMspsDot1adPbPortInfoEntry 1 }
snMspsDot1adPbPortSVlanClassificationMethod OBJECT-TYPE
SYNTAX INTEGER {
sourceMac (1),
destinationMac (2),
cvlanSrcMac (3),
cvlanDstMac (4),
dscp (5),
cvlanDscp (6),
sourceIp (7),
destinationIp (8),
srcIpDstIp (9),
cvlanDstIp (10),
cvlan (11),
pvid (12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of SVLAN classification that has to be used
for a given type of port.
providerNetworkPort / customerNetworkPort - Port's 'pvid' will be the
SVLAN classification for the untagged packets received over this interface.
customerEdgePort - The SVLAN classification mechanism is always based on
'cvlan' (i.e CVidRegistrationTable ).No other SVLAN classification mechanism is
allowed for this port type.
propCustomerNetworkPort / propCustomerEdgePort - 'pvid' will be
default SVLAN classification mechanism for this port. But the user is free to
configure any other SVLAN classification mechanism except the
CVidRegistrationTable (ie cvlan mechanism)
For proprietary CEP and proprietary CNP ports,the SVLAN classification
is based on one of the configured SVLAN classification methods mentioned
here. If it is not configured, by default the port's 'PVID' is considered
as the SVLAN for untagged packets."
::= { snMspsDot1adPbPortInfoEntry 2 }
snMspsDot1adPbPortSVlanIngressEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the S-VLAN tag ether type used for the packets
received on this port.Packets received on a port are considered tagged,
when the packet ethertype matches with the port ether type configured.
Otherwise, they will be considered untagged.
By default, on all the ports, 0x88a8 will be configured as the ether type.
On Proprietary Provider Network Ports 0x8100 will be configured as the
ingress ethertype."
DEFVAL { 34984 }
::= { snMspsDot1adPbPortInfoEntry 3 }
snMspsDot1adPbPortSVlanEgressEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the ether type of the S-VLAN tag that has to
be applied for all the outgoing packets on this port. If a valid value is
in this object, all the packets which are outgoing on this port will
contain the ether type as configured in this object. By Default 0x88a8
will be used for packets transmitted with S-VLAN on the ports.
On Proprietary Provider Network Ports and Customer Edge Ports, 0x8100
will be used as the ether type for the outgoing packets."
DEFVAL { 34984 }
::= { snMspsDot1adPbPortInfoEntry 4}
snMspsDot1adPbPortSVlanEtherTypeSwapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates whether the Ether Type Swapping can be
applied on the S-VLAN tagged packets over this port.
The Ether type swapping will only be applied on S-VLAN tag of a packet.
This configuration is applicable for all values of Port Type other
than customer edge ports."
DEFVAL { disabled }
::= { snMspsDot1adPbPortInfoEntry 5 }
snMspsDot1adPbPortSVlanTranslationStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates whether the VID Translation table can be
enabled on the incoming/outgoing packets on a particular port.
The Service Vlan swapping is applicable only for the externally
accesible network ports (ie) Provider Network Port ,Customer Network port
and proprietary Customer Network Port. The Service Vlan Translation status
can be enabled or disabled on per port basis. By default, it is enabled on
Provider Network Port and Customer Network Port(S-Tagged) and disabled on
the other applicable port-types."
::= { snMspsDot1adPbPortInfoEntry 6 }
snMspsDot1adPbPortUnicastMacLearning OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Truth value indicating the unicast MAC learning enabled/disabled
status for this port. When Unicast Mac Learning is disabled, No
Entry will be learned from the point of configuration on this port.
When Mac Learning is enabled, Entries will be learned on this port."
DEFVAL { enabled }
::= { snMspsDot1adPbPortInfoEntry 7 }
snMspsDot1adPbPortUnicastMacLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Limiting value on the number of distinct unicast destination MAC
addresses that can be dynamically learnt over this interface.
The lower limit and upper limit value that can be SET for this object
is determined by the underlying hardware. This Limit is applicable for
only dynamically learned entries and NOT for static unicast entries"
::= { snMspsDot1adPbPortInfoEntry 8 }
-- -------------------------------------------------------------
-- The S-VLAN Port , SourceMAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbSrcMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per SourceMAC based Service VLAN
classification information in the device. Entries can be configured
into this table only when the bridge is configured as a
Provider Bridge and the Port Type for this port is SET
as Proprietary Customer Edge Port / Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 2 }
snMspsDot1adPbSrcMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress frame with the specified Source
MAC address in the ethernet header of the frame."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcMacAddress }
::= { snMspsDot1adPbSrcMacSVlanTable 1 }
SnMspsDot1adPbSrcMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbSrcMacAddress MacAddress,
snMspsDot1adPbSrcMacSVlan VlanId,
snMspsDot1adPbSrcMacRowStatus RowStatus
}
snMspsDot1adPbSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source MAC address present in the ethernet header of the
frame received on this port for which Service VLAN is assigned
based on this entry."
::= { snMspsDot1adPbSrcMacSVlanEntry 1 }
snMspsDot1adPbSrcMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames received on this port when
the Source MAC address in the ethernet header of the frame is same
as specified in this entry."
::= { snMspsDot1adPbSrcMacSVlanEntry 2 }
snMspsDot1adPbSrcMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbSrcMacSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port , DestinationMAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbDstMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Destination MAC based Service
VLAN classification information in the device. Entries can be
configured into this table only when the bridge is configured
as a Provider Bridge. An entry in this table is possible only when the
'Port Type' for this port is SET as Proprietary Customer Network Port
or Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 3 }
snMspsDot1adPbDstMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress frame with the
specified Destination MAC address in the ethernet header of the frame."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbDstMacAddress }
::= { snMspsDot1adPbDstMacSVlanTable 1 }
SnMspsDot1adPbDstMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbDstMacAddress MacAddress,
snMspsDot1adPbDstMacSVlan VlanId,
snMspsDot1adPbDstMacRowStatus RowStatus
}
snMspsDot1adPbDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination MAC address present in the ethernet header of the
frame received on this port for which Service VLAN is assigned
based on this entry."
::= { snMspsDot1adPbDstMacSVlanEntry 1 }
snMspsDot1adPbDstMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames received on this port when
the Destination MAC address in the ethernet header of the frame is
same as specified in this entry."
::= { snMspsDot1adPbDstMacSVlanEntry 2 }
snMspsDot1adPbDstMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbDstMacSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port , C-VLAN, Source MAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanSrcMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per Port, per Customer VLAN ID,
per Source MAC based S-VLAN classification information in the device.
Entries can be configured into this table only when the bridge is
configured as a Provider Bridge. An entry in this table is
possible only when the 'PortType' for this port is SET as
Proprietary Customer Edge Port / Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 4 }
snMspsDot1adPbCVlanSrcMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanSrcMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this specified
port for an ingress frame with the classified Customer VLAN ID and
with the specified Source MAC address in the ethernet header of the frame.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanSrcMacCVlan, snMspsDot1adPbCVlanSrcMacAddr }
::= { snMspsDot1adPbCVlanSrcMacSVlanTable 1 }
SnMspsDot1adPbCVlanSrcMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanSrcMacCVlan VlanId,
snMspsDot1adPbCVlanSrcMacAddr MacAddress,
snMspsDot1adPbCVlanSrcMacSVlan VlanId,
snMspsDot1adPbCVlanSrcMacRowStatus RowStatus
}
snMspsDot1adPbCVlanSrcMacCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port OR the Customer VLAN ID for which the ingress
frame is classified to this specified port."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 1 }
snMspsDot1adPbCVlanSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source MAC address in the ethernet header of the
frame received on this port."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 2 }
snMspsDot1adPbCVlanSrcMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN assigned to frames received on this port,
When the Classified Customer VLAN ID is same as specified in
this entry and When the Source MAC address in the ethernet header
of the frame is same as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 3 }
snMspsDot1adPbCVlanSrcMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanSrcMacSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port , C-VLAN, Destination MAC based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanDstMacSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per Port, per Customer VLAN ID,
per Destination MAC based S-VLAN classification information in the
device. Entries can be configured into this table only when the
bridge is configured as a Provider Bridge. An entry in this table
is possible only when the 'Port Type' for this port is SET
as Proprietary Customer Edge Port / Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 5 }
snMspsDot1adPbCVlanDstMacSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanDstMacSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this specified
port for an ingress frame with the classified Customer VLAN ID and
with the specified Destination MAC address in the ethernet header of
the frame.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDstMacCVlan, snMspsDot1adPbCVlanDstMacAddr }
::= { snMspsDot1adPbCVlanDstMacSVlanTable 1 }
SnMspsDot1adPbCVlanDstMacSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanDstMacCVlan VlanId,
snMspsDot1adPbCVlanDstMacAddr MacAddress,
snMspsDot1adPbCVlanDstMacSVlan VlanId,
snMspsDot1adPbCVlanDstMacRowStatus RowStatus
}
snMspsDot1adPbCVlanDstMacCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 1 }
snMspsDot1adPbCVlanDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination MAC address in the ethernet header of the
frame received on this port."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 2 }
snMspsDot1adPbCVlanDstMacSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN assigned to frames received on this port
when the Classified Customer VLAN ID and when the Destination
MAC address in the ethernet header of the frame is same as
specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 3 }
snMspsDot1adPbCVlanDstMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanDstMacSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port , DSCP based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbDscpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per DiffServ Code Point (DSCP) value
based Service VLAN classification information in the device.
Entries can be configured into this table only when the bridge is
configured as a Provider Bridge and the 'PortType' for
this port is SET as Proprietary Customer Network Port or
Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 6 }
snMspsDot1adPbDscpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the DSCP value as
specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbDscp }
::= { snMspsDot1adPbDscpSVlanTable 1 }
SnMspsDot1adPbDscpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbDscp Integer32,
snMspsDot1adPbDscpSVlan VlanId,
snMspsDot1adPbDscpRowStatus RowStatus
}
snMspsDot1adPbDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSCP value in the IP header of the frame received on
this port for which Service VLAN is assigned based on this entry."
::= { snMspsDot1adPbDscpSVlanEntry 1 }
snMspsDot1adPbDscpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to IP frames received on this port
when the DSCP value in the IP header of the frame is same as
specified in this entry."
::= { snMspsDot1adPbDscpSVlanEntry 2 }
snMspsDot1adPbDscpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbDscpSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,C-VLAN and DSCP based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanDscpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Customer VLAN ID, per DiffServ Code
Point (DSCP) value based Service VLAN classification information in
the device. Entries can be configured into this table only when the
bridge is configured as a Provider Bridge and the 'PortType' for
this port is SET as Proprietary Customer Edge Port / Proprietary Customer
Network Port."
::= { snMspsDot1adPbConfig 7 }
snMspsDot1adPbCVlanDscpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanDscpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the classified
Customer VLAN ID as specified in this entry and the DSCP value
in the frame as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDscpCVlan, snMspsDot1adPbCVlanDscp }
::= { snMspsDot1adPbCVlanDscpSVlanTable 1 }
SnMspsDot1adPbCVlanDscpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanDscpCVlan VlanId,
snMspsDot1adPbCVlanDscp Integer32,
snMspsDot1adPbCVlanDscpSVlan VlanId,
snMspsDot1adPbCVlanDscpRowStatus RowStatus
}
snMspsDot1adPbCVlanDscpCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 1 }
snMspsDot1adPbCVlanDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSCP value in the IP header of the frame received on
this port."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 2 }
snMspsDot1adPbCVlanDscpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames received on this port,
when the classified Customer VLAN ID is the same as specified in
this entry and when the DSCP value in the IP header of the frame
is same as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 3 }
snMspsDot1adPbCVlanDscpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanDscpSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,Source IP Address based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbSrcIpAddrSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSrcIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Source IP Address, based Service VLAN
classification information in the device. Entries can be configured
into this table only when the bridge is configured as a Provider
Bridge and the 'PortType' for this port is SET as
Proprietary Customer Network Port or Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 8 }
snMspsDot1adPbSrcIpAddrSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSrcIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Source IP Address
in the IP header of the frame as specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcIpAddr }
::= { snMspsDot1adPbSrcIpAddrSVlanTable 1 }
SnMspsDot1adPbSrcIpAddrSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbSrcIpAddr IpAddress,
snMspsDot1adPbSrcIpSVlan VlanId,
snMspsDot1adPbSrcIpRowStatus RowStatus
}
snMspsDot1adPbSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbSrcIpAddrSVlanEntry 1 }
snMspsDot1adPbSrcIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the Source IP address in the IP header of the frame is
same as specified in this entry."
::= { snMspsDot1adPbSrcIpAddrSVlanEntry 2 }
snMspsDot1adPbSrcIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbSrcIpAddrSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,Destination IP Address based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbDstIpAddrSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbDstIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Destination IP Address, based
Service VLAN classification information in the device. Entries can
be configured into this table only when the bridge is configured as
a Provider Bridge and the 'PortType' for this port is SET
as Proprietary Customer Network Port or Proprietary Customer Edge Port."
::= { snMspsDot1adPbConfig 9 }
snMspsDot1adPbDstIpAddrSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbDstIpAddrSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Destination IP
Address in the IP header of the frame as specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbDstIpAddr }
::= { snMspsDot1adPbDstIpAddrSVlanTable 1 }
SnMspsDot1adPbDstIpAddrSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbDstIpAddr IpAddress,
snMspsDot1adPbDstIpSVlan VlanId,
snMspsDot1adPbDstIpRowStatus RowStatus
}
snMspsDot1adPbDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbDstIpAddrSVlanEntry 1 }
snMspsDot1adPbDstIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the Destination IP address in the IP header of the frame is
same as specified in this entry."
::= { snMspsDot1adPbDstIpAddrSVlanEntry 2 }
snMspsDot1adPbDstIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbDstIpAddrSVlanEntry 3 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,SourceIP Address, DestinationIP Address based
-- Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbSrcDstIpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSrcDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Source IP Address, per Destination
IP Address based Service VLAN classification information in the
device. Entries can be configured into this table only when the bridge
is configured as a Provider Bridge and the'PortType' for
this port is SET as Proprietary Customer Network Port or Proprietary
Customer Edge Port."
::= { snMspsDot1adPbConfig 10}
snMspsDot1adPbSrcDstIpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSrcDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this
specified port for an ingress IP frame with the Source and Destination
IP Address in the IP header of the frame as specified in this entry."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbSrcDstSrcIpAddr, snMspsDot1adPbSrcDstDstIpAddr }
::= { snMspsDot1adPbSrcDstIpSVlanTable 1 }
SnMspsDot1adPbSrcDstIpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbSrcDstSrcIpAddr IpAddress,
snMspsDot1adPbSrcDstDstIpAddr IpAddress,
snMspsDot1adPbSrcDstIpSVlan VlanId,
snMspsDot1adPbSrcDstIpRowStatus RowStatus
}
snMspsDot1adPbSrcDstSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 1 }
snMspsDot1adPbSrcDstDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 2 }
snMspsDot1adPbSrcDstIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the Source and Destination IP address in the IP header of
the frame are same as specified in this entry."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 3 }
snMspsDot1adPbSrcDstIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbSrcDstIpSVlanEntry 4 }
-- -------------------------------------------------------------
-- The S-VLAN Port ,Customer VLAN ID, Destination IP Address based
-- Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbCVlanDstIpSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbCVlanDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per port, per Customer VLAN ID, per Destination
IP Address, based Service VLAN classification information in the
device. Entries can be configured into this table only when the bridge
is configured as Provider Bridge or Provider Edge Bridge and the
Port Type for this port is SET as Proprietary Customer Edge Port
/ Proprietary Customer Network Port."
::= { snMspsDot1adPbConfig 11 }
snMspsDot1adPbCVlanDstIpSVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbCVlanDstIpSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling Service VLAN classification at this specified
port for an ingress IP frame with the classified Customer VLAN ID as
specified in this entry and the Destination IP Address in the IP header
of the frame as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbCVlanDstIpCVlan, snMspsDot1adPbCVlanDstIp }
::= { snMspsDot1adPbCVlanDstIpSVlanTable 1 }
SnMspsDot1adPbCVlanDstIpSVlanEntry ::=
SEQUENCE {
snMspsDot1adPbCVlanDstIpCVlan VlanId,
snMspsDot1adPbCVlanDstIp IpAddress,
snMspsDot1adPbCVlanDstIpSVlan VlanId,
snMspsDot1adPbCVlanDstIpRowStatus RowStatus
}
snMspsDot1adPbCVlanDstIpCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
at this specified port or the Customer VLAN ID for which the ingress
frame is classified for at this specified port."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 1 }
snMspsDot1adPbCVlanDstIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination IP Address in the IP header of an ingress
IP frame at this specified port."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 2 }
snMspsDot1adPbCVlanDstIpSVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service VLAN ID assigned to frames ingress at this port
when the classified Customer VLAN ID is same as specified in this entry
and the Destination IP address in the IP header of the frame is same
as specified in this entry.
Classification of Customer VLAN ID may be from the Customer VLAN tag
in the received frame OR based on Port CVLAN table."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 3 }
snMspsDot1adPbCVlanDstIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbCVlanDstIpSVlanEntry 4 }
-- -------------------------------------------------------------
-- The C-VLAN Port based Configuration Table
-- -------------------------------------------------------------
snMspsDot1adPbPortBasedCVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbPortBasedCVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Customer Edge Port / Proprietary Customer Edge Port /
Proprietary Customer Network Port mapping to Customer VLAN on a
providerBridge. This table is used for a classifying a untagged frame
received on above mentioned customer ports."
::= { snMspsDot1adPbConfig 12 }
snMspsDot1adPbPortBasedCVlanEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbPortBasedCVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry in this table will be created whenever a port is configured as
Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer
Network Port.This Entry will be used on the ingress frame on the specified
ports based on enabled status for classifying the frame to CVLAN. Also
the Entry will be deleted in this table, when the port type is modified
anything other than the specified one."
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbPortBasedCVlanTable 1 }
SnMspsDot1adPbPortBasedCVlanEntry ::=
SEQUENCE {
snMspsDot1adPbPortCVlan VlanId,
snMspsDot1adPbPortCVlanClassifyStatus EnabledStatus
}
snMspsDot1adPbPortCVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Customer VLAN ID assigned to untagged frames ingress at this
specified Customer Edge Port / Proprietary Customer Edge Port /
Proprietary Customer Network Port."
::= { snMspsDot1adPbPortBasedCVlanEntry 1 }
snMspsDot1adPbPortCVlanClassifyStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicate C-VLAN classification status on a port.
This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP,
this object cannot be disabled."
DEFVAL { enabled }
::= { snMspsDot1adPbPortBasedCVlanEntry 2 }
-- -------------------------------------------------------------
-- EtherType SwappingTable
-- -------------------------------------------------------------
snMspsDot1adPbEtherTypeSwapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbEtherTypeSwapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing the Translation information of the ethertype for a
Service VLAN in a given packet. This Table shall be used only at ingress
and NOT at egress of the Customer Network Port / Proprietary Customer Network
Port / Provider Network Port.
This translation table is applicable for only Service VLAN and not
for customer VLAN's."
::= { snMspsDot1adPbConfig 13 }
snMspsDot1adPbEtherTypeSwapEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbEtherTypeSwapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing the Local and Relay Ether type for a given packet on
a particular port. This entry shall be applicable on all types of ports
if and only if snMspsDot1adPbPortSVlanEtherTypeSwapStatus is Enabled on that Port."
INDEX { snMspsDot1adPbPort, snMspsDot1adPbLocalEtherType}
::= { snMspsDot1adPbEtherTypeSwapTable 1 }
SnMspsDot1adPbEtherTypeSwapEntry ::=
SEQUENCE {
snMspsDot1adPbLocalEtherType Integer32,
snMspsDot1adPbRelayEtherType Integer32,
snMspsDot1adPbEtherTypeSwapRowStatus RowStatus
}
snMspsDot1adPbLocalEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ether type present in the service vlan tag of the ingress packet at
the given port."
::= { snMspsDot1adPbEtherTypeSwapEntry 1 }
snMspsDot1adPbRelayEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Relay Ether type mapped for the ether type present in the local
service vlan tag of the ingress packet at the given port."
::= { snMspsDot1adPbEtherTypeSwapEntry 2 }
snMspsDot1adPbEtherTypeSwapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { snMspsDot1adPbEtherTypeSwapEntry 3 }
-- ----------------------------------------------------------------
-- S-VLAN configuration table
-- ----------------------------------------------------------------
snMspsDot1adPbSVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbSVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to configure the service type supported by an S-VLAN. Based
on the service type configured for the S-VLAN, the oper point-to-point
state of PEP ports will be determined.
The service type SET for S-VLAN is applicable only for the S-VLAN in
specified Virtual Context identified by the Virtual Context identifier
in this entry."
::= { snMspsDot1adPbConfig 14 }
snMspsDot1adPbSVlanConfigEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbSVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The service type can be configured for an S-VLAN only when the VLAN
is already created in the system."
INDEX { snMspsDot1adPbContextId, dot1qVlanIndex }
::= { snMspsDot1adPbSVlanConfigTable 1 }
SnMspsDot1adPbSVlanConfigEntry ::=
SEQUENCE {
snMspsDot1adPbSVlanConfigServiceType INTEGER
}
snMspsDot1adPbSVlanConfigServiceType OBJECT-TYPE
SYNTAX INTEGER {
eLine (1),
eLan (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to specify the service type supported by the S-VLAN in the
Virtual Context. When it is set to 'eLine', the S-VLAN connects not more
than two customer interfaces. If the service type for a vlan is 'eLine',
then learning member ports through GVRP will not be allowed.
Hence the oper point-to-point state of the PEPs connecting the S-VLAN can
be set to True for specified Virtual Context.
When it is set to 'eLan', the S-VLAN connects more than two customer
interfaces.So the oper point-to-point state of the PEPs connecting the
S-VLAN will be set to False for specified Virtual Context.
In case of IVL, When the service type is set to E-Line for a VLAN,
the MAC learning status will be set to 'disabled'. When it is set
to E-LAN, MAC learning status will be enabled for that VLAN."
::= { snMspsDot1adPbSVlanConfigEntry 1 }
-- ----------------------------------------------------------------
-- Tunnel protocol configuration table
-- ----------------------------------------------------------------
snMspsDot1adPbTunnelProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains information about the handling (Tunnel/Peer/
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x
and IGMP) inside service provider network."
::= { snMspsDot1adPbConfig 15 }
snMspsDot1adPbTunnelProtocolEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
This table is supported only for Provider Core or Provider Edge
Bridges."
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbTunnelProtocolTable 1 }
SnMspsDot1adPbTunnelProtocolEntry ::=
SEQUENCE {
snMspsDot1adPbTunnelProtocolDot1x TunnelStatus,
snMspsDot1adPbTunnelProtocolLacp TunnelStatus,
snMspsDot1adPbTunnelProtocolStp TunnelStatus,
snMspsDot1adPbTunnelProtocolGvrp TunnelStatus,
snMspsDot1adPbTunnelProtocolGmrp TunnelStatus,
snMspsDot1adPbTunnelProtocolIgmp TunnelStatus
}
snMspsDot1adPbTunnelProtocolDot1x OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the Dot1x packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 1 }
snMspsDot1adPbTunnelProtocolLacp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the LACP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 2 }
snMspsDot1adPbTunnelProtocolStp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the STP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 3 }
snMspsDot1adPbTunnelProtocolGvrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GVRP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 4 }
snMspsDot1adPbTunnelProtocolGmrp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the GMRP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 5 }
snMspsDot1adPbTunnelProtocolIgmp OBJECT-TYPE
SYNTAX TunnelStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object to specify whether to peer/tunnel/discard the IGMP packets
received on this port."
::= { snMspsDot1adPbTunnelProtocolEntry 6 }
-- ----------------------------------------------------------------
-- Tunnel protocol statistics table
-- ----------------------------------------------------------------
snMspsDot1adPbTunnelProtocolStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains statistics information about the tunneled
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received
and transmitted over a port."
::= { snMspsDot1adPbConfig 16 }
snMspsDot1adPbTunnelProtocolStatsEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbTunnelProtocolStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
This table is supported only for Provider Core or Provider Edge
Bridges."
INDEX { snMspsDot1adPbPort }
::= { snMspsDot1adPbTunnelProtocolStatsTable 1 }
SnMspsDot1adPbTunnelProtocolStatsEntry ::=
SEQUENCE {
snMspsDot1adPbTunnelProtocolDot1xPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolDot1xPktsSent Counter32,
snMspsDot1adPbTunnelProtocolLacpPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolLacpPktsSent Counter32,
snMspsDot1adPbTunnelProtocolStpPDUsRecvd Counter32,
snMspsDot1adPbTunnelProtocolStpPDUsSent Counter32,
snMspsDot1adPbTunnelProtocolGvrpPDUsRecvd Counter32,
snMspsDot1adPbTunnelProtocolGvrpPDUsSent Counter32,
snMspsDot1adPbTunnelProtocolGmrpPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolGmrpPktsSent Counter32,
snMspsDot1adPbTunnelProtocolIgmpPktsRecvd Counter32,
snMspsDot1adPbTunnelProtocolIgmpPktsSent Counter32
}
snMspsDot1adPbTunnelProtocolDot1xPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled Dot1x Packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 1 }
snMspsDot1adPbTunnelProtocolDot1xPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled Dot1x Packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 2 }
snMspsDot1adPbTunnelProtocolLacpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled LACP Packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 3 }
snMspsDot1adPbTunnelProtocolLacpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled LACP packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 4 }
snMspsDot1adPbTunnelProtocolStpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled STP PDUs received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 5 }
snMspsDot1adPbTunnelProtocolStpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled STP PDUs transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 6 }
snMspsDot1adPbTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GVRP PDUs received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 7 }
snMspsDot1adPbTunnelProtocolGvrpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GVRP PDUs transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 8 }
snMspsDot1adPbTunnelProtocolGmrpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GMRP PDUs packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 9 }
snMspsDot1adPbTunnelProtocolGmrpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled GMRP packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 10 }
snMspsDot1adPbTunnelProtocolIgmpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled IGMP packets received."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 11 }
snMspsDot1adPbTunnelProtocolIgmpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled IGMP packets transmitted."
::= { snMspsDot1adPbTunnelProtocolStatsEntry 12 }
-- ----------------------------------------------------------------
-- Provider Edge Port configuration table
-- ----------------------------------------------------------------
snMspsDot1adPbPepExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDot1adPbPepExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an extention of dot1adMIPepTable table, and it provides
additional configurations to PEPs (like Cos Preservations,..).
when a entry in dot1adMIPepTable is created, then an entry will be
created in this table."
::= { snMspsDot1adPbConfig 17 }
snMspsDot1adPbPepExtEntry OBJECT-TYPE
SYNTAX SnMspsDot1adPbPepExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains information like (COS preservation, ..) for the
internal PEPs. Creation of an entry in this table is not allowed
and only modification is allowed."
AUGMENTS { snMspsDot1adPepEntry }
::= { snMspsDot1adPbPepExtTable 1 }
SnMspsDot1adPbPepExtEntry ::=
SEQUENCE {
snMspsDot1adPbPepExtCosPreservation EnabledStatus
}
snMspsDot1adPbPepExtCosPreservation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable COS preservation for a
service provided by this PEP."
DEFVAL { disabled }
::= { snMspsDot1adPbPepExtEntry 1 }
--
-- NTP Module common Objects.
--
snMspsNtpCommon OBJECT IDENTIFIER ::= { snMspsNtp 1 }
--
-- NTP Client Module Objects.
--
snMspsNtpClient OBJECT IDENTIFIER ::= { snMspsNtp 2 }
--
-- NTP Server Module Objects. (For future implementations.)
--
snMspsNtpServer OBJECT IDENTIFIER ::= { snMspsNtp 3 }
--
-- Textual Conventions
--
NTPSignedTimeValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The time in seconds that could represent signed
quantities like time delay with respect to some
source."
SYNTAX Integer32
NTPStratum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the stratum of the clock. The stratum
defines the accuracy of a time server. Higher the
stratum, lower the accuracy.
0, unspecified
1, primary reference (e.g., calibrated atomic clock,
radio clock)
2-255, secondary reference (via NTP)"
SYNTAX Integer32 (0..255 )
NTPRefId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reference clock identifier. In the case of
stratum 0 (unspecified) or stratum 1 (primary
reference source), this is a four-octet,
left-justified, zero-padded ASCII string as defined
in RFC-1305. In the case of stratum 2 and greater
(secondary reference) this is the four-octet Internet
address of the peer selected for synchronization."
SYNTAX OCTET STRING (SIZE (4))
NTPAssocIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The association identifier of the peer. Every peer
with which an NTP server is associated with is
identified by an association identifier."
SYNTAX Integer32 (1..2147483647)
--
-- NTP Common System Informations
--
snMspsNtpCommonSysStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP module functionality Operational status, if it is enabled
it will send the NTP Message to the peer and
synchronize peer and or synchronized by peer.
setting this value is depends on other TIME Modules like
SNPT, SINEC, ..."
DEFVAL { disabled }
::= { snMspsNtpCommon 1 }
snMspsNtpCommonTimeZoneDiffTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Timezone Diff Time with the UTC Time representation or
any other ime representation. format is +/-HH:MM"
-- DEFVAL { "+00:00" }
::= { snMspsNtpCommon 2 }
snMspsNtpCommonSysDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object give the current system date and time."
::= { snMspsNtpCommon 3 }
snMspsNtpCommonTraceFlag OBJECT-TYPE
SYNTAX Unsigned32 (0.. 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object used to configure the trace level of the NTP module.
Find the values and corresponding trace information
1.Disable traces 0x00000000
2.Error traces 0x00000001
3.Failure traces 0x00000002
4.Info traces 0x00000004
5.HighInfo traces 0x00000008
6.Debug traces 0x00000010
7.All traces 0x000000ff
and it can be combination of the all above."
DEFVAL { 0 }
::= { snMspsNtpCommon 4 }
--
-- NTP Client Configuration Table Informations
--
snMspsNtpClientPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNtpClientPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the peers with
which the local NTP has associations. The
peers are also NTP servers but running on different
hosts."
::= { snMspsNtpClient 1 }
snMspsNtpClientPeerEntry OBJECT-TYPE
SYNTAX SnMspsNtpClientPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each peers' entry provides NTP information retrieved
from a particular peer NTP server. Each peer is
identified by a unique association identifier."
INDEX { snMspsNtpClientPeerAssocId }
::= { snMspsNtpClientPeerTable 1 }
SnMspsNtpClientPeerEntry ::= SEQUENCE {
snMspsNtpClientPeerAssocId NTPAssocIdentifier,
snMspsNtpClientPeerPeerAddrType InetAddressType,
snMspsNtpClientPeerPeerInetAddress InetAddress,
snMspsNtpClientPeerPeerPort Integer32,
snMspsNtpClientPeerPeerStratum NTPStratum,
snMspsNtpClientPeerPeerPrecision Integer32,
snMspsNtpClientPeerPeerRefId NTPRefId,
snMspsNtpClientPeerHostPoll Integer32,
snMspsNtpClientPeerHostOffset NTPSignedTimeValue,
snMspsNtpClientPeerHostDelay NTPSignedTimeValue,
snMspsNtpClientPeerEntryStatus RowStatus,
snMspsNtpClientPeerSecureKeyID Integer32,
snMspsNtpClientPeerSecureAlgorithm INTEGER,
snMspsNtpClientPeerSecureKey OCTET STRING
}
snMspsNtpClientPeerAssocId OBJECT-TYPE
SYNTAX NTPAssocIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value greater than 0 that uniquely
identifies a peer with which the local NTP server/client
is associated. This value is depends on the no of client entries
support by the NTP implementation.
If an entry creation throughs error as worng-value it may be
reached the no of client entries support by the NTP implementation."
::= { snMspsNtpClientPeerEntry 1 }
snMspsNtpClientPeerPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the type of the corresponding instance
of snMspsNtpClientPeerPeerInetAddress object."
DEFVAL { ipv4 }
::= { snMspsNtpClientPeerEntry 2 }
snMspsNtpClientPeerPeerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the peer. When creating a new
association, a value must be set forthis
object before the row is made active."
::= { snMspsNtpClientPeerEntry 3 }
snMspsNtpClientPeerPeerPort OBJECT-TYPE
SYNTAX Integer32 (123 | 1025..36564)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port number on which the peer receives NTP
messages."
DEFVAL { 123 }
::= { snMspsNtpClientPeerEntry 4 }
snMspsNtpClientPeerPeerStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of the peer clock."
::= { snMspsNtpClientPeerEntry 5 }
snMspsNtpClientPeerPeerPrecision OBJECT-TYPE
SYNTAX Integer32 (-20..20 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signed integer indicating the precision of the peer
clock, in seconds to the nearest power of two. The
value must be rounded to the next larger power of
two; for instance, a 50-Hz (20 ms) or 60-Hz
(16.67 ms) power-frequency clock would be assigned
the value -5 (31.25 ms), while a 1000-Hz (1 ms)
crystal-controlled clock would be assigned the value
-9 (1.95 ms)."
::= { snMspsNtpClientPeerEntry 6 }
snMspsNtpClientPeerPeerRefId OBJECT-TYPE
SYNTAX NTPRefId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The reference identifier of the peer."
::= { snMspsNtpClientPeerEntry 7 }
snMspsNtpClientPeerHostPoll OBJECT-TYPE
SYNTAX Integer32 (64..2678400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval at which the local host polls the peer.
The minimum interval between transmitted NTP
messages, in seconds."
DEFVAL { 64 }
::= { snMspsNtpClientPeerEntry 8 }
snMspsNtpClientPeerHostOffset OBJECT-TYPE
SYNTAX NTPSignedTimeValue
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated offset of the the local clock relative to
the peer clock, in seconds. The host determines the
value of this object using the NTP clock-filter
algorithm."
::= { snMspsNtpClientPeerEntry 9 }
snMspsNtpClientPeerHostDelay OBJECT-TYPE
SYNTAX NTPSignedTimeValue
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated round-trip delay of the local clock
relative to the peer clock over the network path
between them, in seconds. The host determines the
value of this object using the NTP clock-filter
algorithm."
::= { snMspsNtpClientPeerEntry 10 }
snMspsNtpClientPeerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object for this row. When a management
station is creating a new row, it should set the
value for snMspsNtpClientPeerPeerInetAddress at least, before the
row can be made active(1).
If an entry creation through error as worng-value it may be
reached the no of client entries support by the NTP implementation.
any set for the read-write objects in the table are needs to be
done by making the this objects as notinservice (2).
otherwise it have effect on next active only."
::= { snMspsNtpClientPeerEntry 11 }
snMspsNtpClientPeerSecureKeyID OBJECT-TYPE
SYNTAX Integer32 (1..65534)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of the key, to tell the secure NTP server which key is used."
DEFVAL { 1 }
::= { snMspsNtpClientPeerEntry 24 }
snMspsNtpClientPeerSecureAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
des(1),
md5(2),
sha1(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hash algorithm, which is used in secure NTP."
DEFVAL { 1 }
::= { snMspsNtpClientPeerEntry 25 }
snMspsNtpClientPeerSecureKey OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secure key, which is used in secure NTP during authenti-cation.
The key is encrypted before saving in configuration."
::= { snMspsNtpClientPeerEntry 29 }
-- global setting for Secure NTP
snMspsNtpClientPeerSecure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables support of secure NTP."
DEFVAL { false }
::= { snMspsNtpClient 5 }
snMspsNtpServerStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable NTP module Server module. If it is enabled
NTP Clients will get the time from the Servers.
"
DEFVAL { disabled }
::= { snMspsNtpServer 1 }
snMspsNtpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the ntp servers."
::= { snMspsNtpServer 2 }
snMspsNtpServerEntry OBJECT-TYPE
SYNTAX SnMspsNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the ip interfaces."
INDEX { ifIndex }
::= { snMspsNtpServerTable 1 }
SnMspsNtpServerEntry ::= SEQUENCE {
snMspsNtpServerEnable TruthValue,
snMspsNtpServerPort Integer32,
snMspsNtpServerSecureStatus TruthValue,
snMspsNtpServerKeyID Integer32,
snMspsNtpServerSecureAlgorithm INTEGER,
snMspsNtpServerSecureKey OCTET STRING,
snMspsNtpServerRowStatus RowStatus
}
snMspsNtpServerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables NTP Server of an interface."
DEFVAL { false }
::= { snMspsNtpServerEntry 1 }
snMspsNtpServerPort OBJECT-TYPE
SYNTAX Integer32 (123 | 1025..36564)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port number on which the peer receives NTP
messages."
DEFVAL { 123 }
::= { snMspsNtpServerEntry 2 }
snMspsNtpServerSecureStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables NTP Secure Server of an interface."
DEFVAL { false }
::= { snMspsNtpServerEntry 3 }
snMspsNtpServerKeyID OBJECT-TYPE
SYNTAX Integer32 (1..65534)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ntp key index."
DEFVAL { 1 }
::= { snMspsNtpServerEntry 4 }
snMspsNtpServerSecureAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
des(1),
md5(2),
sha1(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hash algorithm, which is used in secure NTP Server."
DEFVAL { 1 }
::= { snMspsNtpServerEntry 5 }
snMspsNtpServerSecureKey OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secure key, which is used in secure NTP Server during authentication.
The key is encrypted before saving in configuration."
::= { snMspsNtpServerEntry 6 }
snMspsNtpServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object for this row.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
"
::= { snMspsNtpServerEntry 7 }
-- the following OID is reserved for global Secure NTP Server
-- of this MIB module: { snMspsNtpServer 3 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
-- SN-MSPS-NTP-MIB 2101 ... 2150
snMspsTrapNTPInvalidConfiguration NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Invalid NTP Configuration."
::= { snMspsTrapPrefix 2101 }
snMspsTrapNTPWrongPacketLength NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet with wrong length."
::= { snMspsTrapPrefix 2102 }
snMspsTrapNTPWrongSourceAddress NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet from wrong Source Address."
::= { snMspsTrapPrefix 2103 }
snMspsTrapNTPWrongKeyId NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet with wrong or missing Key Id."
::= { snMspsTrapPrefix 2104 }
snMspsTrapNTPAddAuthFail NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Secure NTP failed to add authentication."
::= { snMspsTrapPrefix 2105 }
snMspsTrapNTPVerifyAuthFail NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Received NTP Packet failed authentication."
::= { snMspsTrapPrefix 2106 }
snMspsTrapNTPKeyUpdate NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"SecureNTP Keys were updated."
::= { snMspsTrapPrefix 2107 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsSntpAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable the sntp client module. All configuration will be
acitve only when the SNTP module is enabled"
DEFVAL { disabled }
::= { snMspsSntpClient 1 }
snMspsSntpClientVersion OBJECT-TYPE
SYNTAX INTEGER {version1 (1), version2 (2), version3 (3), version4 (4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNTP client module can run in any one version 1, version 2,
version 3 or version 4. All the SNTP requests are sent out with the
current configured version number. When required, the administrator
can change the current version number"
DEFVAL { version4 }
::= { snMspsSntpClient 2 }
snMspsSntpClientAddressingMode OBJECT-TYPE
SYNTAX INTEGER {unicast (1), broadcast (2), multicast (3), anycast (4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" unicast:
- SNTP client operates in a point-to-point fashion. A unicast
client sends a request to a designated server at its unicast address
and expects a reply from which it can determine the time and,
optionally, the round-trip delay and local clock ofsnMspset relative to
the server.
broadcast:
- SNTP client operates in a point-to-multipoint fashion. The SNTP
server uses an IP local broadcast address instead of a multicast
address. The broadcast address is scoped to a single subnet, while a
multicast address has Internet wide scope.
multicast:
- SNTP client operates in point-to-multipoint fashion. The SNTP server
uses a multicast group address to send unsolicited SNTP messages to
clients. The client listens on this address and sends no requests for
updates.
anycast:
- SNTP client operates in a multipoint-to-point fashion. The SNTP
client sends a request to a designated IPv4 or IPv6 local broadcast
address or multicast group address. One or more anycast servers reply
with their individual unicast addresses."
DEFVAL { unicast }
::= { snMspsSntpClient 3 }
snMspsSntpClientPort OBJECT-TYPE
SYNTAX Integer32 ( 123 | 1025..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNTP client module by default listens on well-know port number 123.
When required, the Administrator can change the SNTP Client port value
to non-default."
DEFVAL {123}
::= { snMspsSntpClient 4 }
snMspsSntpTimeDisplayFormat OBJECT-TYPE
SYNTAX INTEGER { hours (1), ampm (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The administrator can view the system time in 12 hr AM/PM or 24
hours format. "
DEFVAL { hours }
::= { snMspsSntpClient 5 }
snMspsSntpAuthKeyId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key Identifier is an integer identifying the cryptographic key used
to generate the message-authentication code"
::= { snMspsSntpClient 6 }
snMspsSntpAuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER { none (0), md5 (1), des (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the NTP authentication scheme is implemented, the Key Identifier
and Message Digest fields contain the message authentication code (MAC)
information. Message Digest-5 (MD5) and Data Encryption Standard (DES)
are the Authentication algorithms that can be used. Default
Authentication supported is none"
DEFVAL { none }
::= { snMspsSntpClient 7 }
snMspsSntpAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication key is cryptographic key that is used to implement NTP
Authentication "
::= { snMspsSntpClient 8 }
snMspsSntpTimeZone OBJECT-TYPE
SYNTAX DisplayString (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set the system time zone with respect to UTC. ie plus indicates
forward time zone ( ahead of UTC Time eg: +05:30) and minus indicates
backward time zone (behind UTC time eg: -03:30). The valid format is
(+/-)HH:MM"
::= { snMspsSntpClient 9 }
snMspsSntpDSTStartTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Daylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countries observe DST,
although most have their own rules and regulations for when it begins
and ends. The dates of DST may change from year to year. The Valid
format [weekofmonth-weekofday-month,HH:MM].
Example:- Third-Mon-Apr,17:30 "
::= { snMspsSntpClient 10 }
snMspsSntpDSTEndTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Daylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countries observe DST,
although most have their own rules and regulations for when it begins
and ends. The dates of DST may change from year to year. The Valid
format [weekofmonth-weekofday-month,HH:MM].
Example:- Last-Sun-Nov,16:20 "
::= { snMspsSntpClient 11 }
snMspsSntpServerAutoDiscovery OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The SNTP servers can be configured or discovered. When Auto Discover
is disabled, the SNTP client gets the time from the configured servers.
When Auto Discover is enabled, the SNTP client gets the time from servers
learnt through DHPC client. This is valid only in Unicast
Addressing mode."
DEFVAL { disabled }
::= { snMspsSntpClient 12 }
snMspsSntpUnicastPollInterval OBJECT-TYPE
SYNTAX Unsigned32 (16..16284)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds between successive SNTP request transmissions. "
DEFVAL { 64 }
::= {snMspsSntpClient 13 }
snMspsSntpUnicastPollTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP server
before considering the attempt to have 'timed out' "
DEFVAL { 5 }
::= {snMspsSntpClient 14 }
snMspsSntpUnicastPollRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times to retry a request to a SNTP server
that has not successfully responded. For example, assume this object
has been SET to a value of 2. When the SNTP client queries a given
server it will send 1 SNTP request frame. If that original attempt
fails, the client will retry up to a maximum of 2 more times before
giving up and attempting the next server."
DEFVAL { 3 }
::= { snMspsSntpClient 15 }
-- This table is for configuring the unicast server table
snMspsSntpUnicastServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSntpUnicastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains configured SNTP/NTP servers in the system."
::= {snMspsSntpClient 16 }
snMspsSntpUnicastServerEntry OBJECT-TYPE
SYNTAX SnMspsSntpUnicastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in the table contains necessary information to
send SNTP request to the servers."
INDEX {snMspsSntpUnicastServerAddrType, snMspsSntpUnicastServerAddr }
::= { snMspsSntpUnicastServerTable 1 }
SnMspsSntpUnicastServerEntry ::= SEQUENCE {
snMspsSntpUnicastServerAddrType InetAddressType,
snMspsSntpUnicastServerAddr InetAddress,
snMspsSntpUnicastServerVersion INTEGER,
snMspsSntpUnicastServerPort Integer32,
snMspsSntpUnicastServerType INTEGER,
snMspsSntpUnicastServerLastUpdateTime DisplayString,
snMspsSntpUnicastServerTxRequests Counter32,
snMspsSntpUnicastServerRowStatus RowStatus
}
snMspsSntpUnicastServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Address type of the unicast server in the Unicast Addressing mode.
It can be IPv4 or IPv6 unicast address."
::= { snMspsSntpUnicastServerEntry 1 }
snMspsSntpUnicastServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The unicast IPv4/IPv6 server address in the Unicast Addressing mode "
::= { snMspsSntpUnicastServerEntry 2}
snMspsSntpUnicastServerVersion OBJECT-TYPE
SYNTAX INTEGER {version3 (3),version4 (4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the sntp version supported by the server"
::= { snMspsSntpUnicastServerEntry 3 }
snMspsSntpUnicastServerPort OBJECT-TYPE
SYNTAX Integer32 ( 123 | 1025..36564)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the sntp port on which the server is UP"
::= { snMspsSntpUnicastServerEntry 4 }
snMspsSntpUnicastServerType OBJECT-TYPE
SYNTAX INTEGER { primary (1), secondary (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In Unicast addressing mode, we can have primary and secondary servers.
This flag is to distinguish between primary and secondary server.
SNTP client sends request to different servers until it receives
successful response. This flag tells the order in which to query the
servers."
::= { snMspsSntpUnicastServerEntry 5 }
snMspsSntpUnicastServerLastUpdateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time when the system time was successful"
::= { snMspsSntpUnicastServerEntry 6 }
snMspsSntpUnicastServerTxRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SNTP request sent in the Unicast addressing mode."
::= { snMspsSntpUnicastServerEntry 7 }
snMspsSntpUnicastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The activation of a row adds server entry. The destruction of a row
removes server entry"
::= {snMspsSntpUnicastServerEntry 8}
-- Broadcast objects
snMspsSntpSendRequestInBcastMode OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"when enabled the sntp request will be sent to the broadcast server to
calculate the dealy time. This is valid only in broadcast
addressing mode"
DEFVAL { disabled }
::= { snMspsSntpClient 17 }
snMspsSntpPollTimeoutInBcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP server before
considering the attempt to have 'timed out'. This is valid only in
broadcast addressing mode "
DEFVAL { 5 }
::= {snMspsSntpClient 18 }
snMspsSntpDelayTimeInBcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1000..15000)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The broadcast server may send reply for the request. When the SNTP
client does get response from the boradcast server,
this value is taken as delay time "
DEFVAL { 8000 }
::= { snMspsSntpClient 19 }
-- snMspsSntpClient 20-22 reserved
-- Multicast Objects
snMspsSntpSendRequestInMcastMode OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" when enabled the sntp request will be sent to the multicast server to
calculate the dealy time."
DEFVAL { disabled }
::= { snMspsSntpClient 23 }
snMspsSntpPollTimeoutInMcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP
server before considering the attempt to have 'timed out'"
DEFVAL { 5 }
::= {snMspsSntpClient 24 }
snMspsSntpDelayTimeInMcastMode OBJECT-TYPE
SYNTAX Unsigned32 (1000..15000)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" this is taken as delay time when there is no response from the
multicast server "
DEFVAL { 8000 }
::= { snMspsSntpClient 25 }
snMspsSntpGrpAddrTypeInMcastMode OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The multicast group address can be configured by the administrator."
::= {snMspsSntpClient 26 }
snMspsSntpGrpAddrInMcastMode OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The multicast group address can be configured by the administrator."
::= {snMspsSntpClient 27 }
-- snMspsSntpClient 28-32 reserved
-- Anycast Objects
snMspsSntpAnycastPollInterval OBJECT-TYPE
SYNTAX Unsigned32 (16..16284)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds between successive SNTP request transmissions."
DEFVAL { 64 }
::= {snMspsSntpClient 33 }
snMspsSntpAnycastPollTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP server
before considering the attempt to have 'timed out'."
DEFVAL { 5 }
::= {snMspsSntpClient 34 }
snMspsSntpAnycastPollRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times to retry a request to a SNTP server
that has not successfully responded.
For example, assume this object has been SET to a value of 2.
When the SNTP client queries a given server it will send 1 SNTP
request frame. If that original attempt fails, the client will
retry up to a maximum of 2 more times before giving up and
attempting the next server."
DEFVAL { 3 }
::= { snMspsSntpClient 35 }
snMspsSntpServerTypeInAcastMode OBJECT-TYPE
SYNTAX INTEGER { broadcast (1), multicast (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set the type of servers to be used in Anycast addressing mode"
DEFVAL { broadcast }
::= { snMspsSntpClient 36 }
snMspsSntpGrpAddrTypeInAcastMode OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type of the server configured by the administrator"
::= {snMspsSntpClient 37 }
snMspsSntpGrpAddrInAcastMode OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast group address can be configured by the administrator."
::= {snMspsSntpClient 38 }
-- --------------------------------------------------------------
-- Timezone and DST Sub-Group
-- --------------------------------------------------------------
snMspsTimezone OBJECT IDENTIFIER ::= { snMspsDst 1 }
snMspsTimezoneOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Show/Set timezone offset (min)."
::= { snMspsTimezone 1 }
snMspsTimezoneDSTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsTimezoneDSTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to configure DST entries."
::= { snMspsTimezone 2 }
snMspsTimezoneDSTEntry OBJECT-TYPE
SYNTAX SnMspsTimezoneDSTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An Entry specifies the start and end of a daylight saving time."
INDEX { snMspsTimezoneDSTIndex }
::= { snMspsTimezoneDSTTable 1 }
SnMspsTimezoneDSTEntry ::= SEQUENCE {
snMspsTimezoneDSTIndex INTEGER,
snMspsTimezoneDSTName DisplayString,
snMspsTimezoneDSTType INTEGER,
snMspsTimezoneDSTDate DisplayString,
snMspsTimezoneDSTRecurring DisplayString,
snMspsTimezoneDSTRowStatus RowStatus
}
snMspsTimezoneDSTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of this entry."
::= { snMspsTimezoneDSTEntry 1 }
snMspsTimezoneDSTName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Shows and sets the name of this entry."
::= { snMspsTimezoneDSTEntry 2 }
snMspsTimezoneDSTType OBJECT-TYPE
SYNTAX INTEGER {
date(1),
recurring(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether it is a static or a recurring entry."
::= { snMspsTimezoneDSTEntry 3 }
snMspsTimezoneDSTDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Daylight saving time information:
year mmddhh(start) mmddhh(end)"
::= { snMspsTimezoneDSTEntry 4 }
snMspsTimezoneDSTRecurring OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Shows and sets the recurring information of this entry.
Null if it is not a recurring entry."
::= { snMspsTimezoneDSTEntry 5 }
snMspsTimezoneDSTRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this entry."
::= { snMspsTimezoneDSTEntry 6 }
snMspsPtpSystem OBJECT IDENTIFIER ::= { snMspsPtp 1 }
snMspsPtpTransparentClock OBJECT IDENTIFIER ::= { snMspsPtp 2 }
-- --------------------------------------------------------------
-- IEEE1588System Sub-Group
-- --------------------------------------------------------------
snMspsPtpMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
transparent-clock-mode (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable IEEE 1588 mode."
DEFVAL { 1 }
::= { snMspsPtpSystem 1 }
snMspsPtpTimeZoneDiffTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Timezone Diff Time with the UTC Time representation or
any other time representation. format is +/-HH:MM"
DEFVAL { "+00:00" }
::= { snMspsPtpSystem 2 }
-- --------------------------------------------------------------
-- IEEE1588 Transparent Clock Sub-Group
-- --------------------------------------------------------------
snMspsPtpTCPrimaryDomainNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Domain identifier of the primary synchronization domain.
Clocks sharing a common domain identifier participate with
one another in communication of time information
and best master clock selection."
DEFVAL { 0 }
::= { snMspsPtpTransparentClock 1 }
snMspsPtpTCDelayMechanism OBJECT-TYPE
SYNTAX INTEGER {
end-to-end(1),
peer-to-peer(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the propagation delay measuring option used by the
port in computing peerMeanPathDelay. If the transparent clock
is an end-to-end transparent clock, delayMechanism shall be end-to-end(1).
If the transparent clock is a peer-to-peer transparent clock,
the value shall be peer-to-peer (2)."
DEFVAL { 1 }
::= { snMspsPtpTransparentClock 2 }
snMspsPtpTCSyntonized OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TRUE if transparent clock should syntonize to master, otherwise syntonization is disabled."
DEFVAL { false }
::= { snMspsPtpTransparentClock 3 }
snMspsPtpTCVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Vlan that is used for IEEE 1588"
DEFVAL { 1 }
::= { snMspsPtpTransparentClock 4 }
snMspsPtpTCOneStep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TRUE if transparent clock should use onestep, otherwise onestep is disabled."
DEFVAL { true }
::= { snMspsPtpTransparentClock 5 }
-- --------------------------------------------------------------
-- IEEE1588 Transparent Clock Port Table
-- --------------------------------------------------------------
snMspsPtpTCPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPtpTCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IEEE 1588 Transparent Clock Port Table."
::= { snMspsPtpTransparentClock 100 }
snMspsPtpTCPortEntry OBJECT-TYPE
SYNTAX SnMspsPtpTCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IEEE 1588 Transparent Clock Port entry. "
INDEX { snMspsPtpTCPortIfIndex }
::= { snMspsPtpTCPortTable 1 }
SnMspsPtpTCPortEntry ::= SEQUENCE {
snMspsPtpTCPortIfIndex INTEGER,
snMspsPtpTCPortEnable INTEGER,
snMspsPtpTCPortLogMinPdelayReqInterval INTEGER,
snMspsPtpTCPortIngressLatency INTEGER,
snMspsPtpTCPortEgressLatency INTEGER,
snMspsPtpTCPortTransportMechanism INTEGER,
snMspsPtpTCPortMeanPathDelay INTEGER,
snMspsPtpTCPortFaultyFlag TruthValue
}
snMspsPtpTCPortIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which IEEE 1588 Transparent Clock occurs on."
::= { snMspsPtpTCPortEntry 1 }
snMspsPtpTCPortEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable IEEE 1588 Transparent Clock on port."
DEFVAL { 1 }
::= { snMspsPtpTCPortEntry 2 }
snMspsPtpTCPortLogMinPdelayReqInterval OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The logarithm to the base 2 of the minimum permitted mean time
interval between successive Pdelay_Req messages,
i.e., the minPdelayReqInterval, sent over a link."
DEFVAL { 0 }
::= { snMspsPtpTCPortEntry 3 }
snMspsPtpTCPortIngressLatency OBJECT-TYPE
SYNTAX INTEGER (0..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IngressLantency:
<ingressTimestamp> = <ingressMeasuredTimestamp> + ingressLatency.
IngressLatency in nano seconds"
DEFVAL { 0 }
::= { snMspsPtpTCPortEntry 4 }
snMspsPtpTCPortEgressLatency OBJECT-TYPE
SYNTAX INTEGER (0..50000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "EgressLatency:
<egressTimestamp> = <egressMeasuredTimestamp> + egressLatency.
EgressLatency in nano seconds"
DEFVAL { 0 }
::= { snMspsPtpTCPortEntry 5 }
snMspsPtpTCPortTransportMechanism OBJECT-TYPE
SYNTAX INTEGER {
udp-ip-v4(1),
udp-ip-v6(2),
ethernet(3),
devicenet(4),
controlnet(5),
profinet(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the transport protocols for PTP communications.
See IEEE 1588-2008 Table 3 for networkProtocol enumerations."
::= { snMspsPtpTCPortEntry 6 }
snMspsPtpTCPortMeanPathDelay OBJECT-TYPE
SYNTAX INTEGER (0..50000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the value of delayMechanism is peer-to-peer (P2P),
the value is an estimate of the current one-way propagation
delay on the link, i.e., meanPathDelay, attached to this port
computed using the peer delay mechanism. Delay is expressed in nanoseconds
multiplied by 65536; a 1 second offset is expressed as 65536000000000.
If the value of the portDelayMechanism member is end-to-end (E2E), the value is zero."
::= { snMspsPtpTCPortEntry 7 }
snMspsPtpTCPortFaultyFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value shall be TRUE if the port is faulty and FALSE if the port is operating normally."
::= { snMspsPtpTCPortEntry 8 }
snMspsPnioEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "The value enabled(1) will automatically run PROFINET.
The value disabled(2) will inhibit PROFINET."
::= { snMspsPnio 1 }
snMspsPnioInDataExchange OBJECT-TYPE
SYNTAX INTEGER {
online (1),
offline (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Show the state of PROFINETInDataExchange."
::= { snMspsPnio 2 }
snMspsPnioNameOfStation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..240))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of Station of the device."
::= { snMspsPnio 3 }
snMspsPnioInDataExchangeControl OBJECT-TYPE
SYNTAX INTEGER {
allow-online (1),
force-to-offline (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "allow-online (1) allows the device to change in PROFINETInDataExchange online.
force-to-offline (2) force the device to PROFINETInDataExchange offline."
::= { snMspsPnio 4 }
snMspsPnioFaultMode OBJECT-TYPE
SYNTAX INTEGER {
latent(1),
evident(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Controls the PROFINET diagnostics behaviour for the PROFINET device:
latent (1) - The device doesn't notify any PROFINET fault
evident (2) - The device sets a fault if there is no connection to a PROFINET Controller
The PROFINET Device sets the snPnioMode automatically to 'evident (2)' if the
device ever established a connection to a PROFINET Controller"
::= { snMspsPnio 5 }
snMspsPnioResetIpCfgOnRestart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If true, resets the (temporary) IP configuration to 0.0.0.0
when the device restarts and then also resets this object
to false. Should thus be set to false whenever a new static
IP configuration is set to avoid it being reset on restart."
::= { snMspsPnio 6 }
snMspsPnioAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(0),
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Shows the next Mode of PROFINET after the next reboot takes place."
::= { snMspsPnio 9 }
snMspsPnioOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(0),
off(1),
on(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Shows the current Mode of PROFINET."
::= { snMspsPnio 10 }
--HOLD_TIME_TABLE_BEGIN
snMspsPnioHoldTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPnioHoldTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains Hold Time information."
::= { snMspsPnio 20 }
snMspsPnioHoldTimeEntry OBJECT-TYPE
SYNTAX SnMspsPnioHoldTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Hold Time is stored."
INDEX { snMspsPnioHoldTimeEntryIndex }
::= { snMspsPnioHoldTimeTable 1 }
SnMspsPnioHoldTimeEntry ::= SEQUENCE {
snMspsPnioHoldTimeEntryIndex Unsigned32,
snMspsPnioHoldTimeValue INTEGER
}
snMspsPnioHoldTimeEntryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of the Hold Time Entry"
::= { snMspsPnioHoldTimeEntry 1 }
snMspsPnioHoldTimeValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hold Time of an entry"
::= { snMspsPnioHoldTimeEntry 2 }
--HOLD_TIME_TABLE_END
snMspsIpIp OBJECT IDENTIFIER ::= { snMspsIp 1 }
snMspsIpArp OBJECT IDENTIFIER ::= { snMspsIp 2 }
snMspsIpIcmp OBJECT IDENTIFIER ::= { snMspsIp 3 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
snMspsIpInLengthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets received by IP with length less
than IP header length."
::= { snMspsIpIp 1 }
snMspsIpInCksumErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Number of received packets those failed to pass
checksum verification."
::= { snMspsIpIp 2 }
snMspsIpInVersionErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received packets with different IP
version from this entity."
::= { snMspsIpIp 3 }
snMspsIpInTTLErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IP packets received at this entity with
'Time to Live' field equal to ZERO"
::= { snMspsIpIp 4 }
snMspsIpInOptionErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IP packets received with improper options."
::= { snMspsIpIp 5 }
snMspsIpInBroadCasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP broadcast packets received at this
entity."
::= { snMspsIpIp 6 }
snMspsIpOutGenErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of outgoing IP packets rejected due to general
problems like interface down, forwarding disabled etc."
::= { snMspsIpIp 7 }
snMspsIpOptProcEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indication as to if Option processing is active."
DEFVAL { enabled }
::= { snMspsIpIp 9 }
snMspsIpNumMultipath OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of multi-paths in the routing table."
DEFVAL { 2 }
::= { snMspsIpIp 10 }
snMspsIpLoadShareEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling this will distribute the load among
available equal cost multi-paths."
DEFVAL { disabled }
::= { snMspsIpIp 11 }
snMspsIpEnablePMTUD OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object Enables or Disables PMTU-D on all paths
globally. This MIB Object overrides the route-based and
application-level requests for PMTU-D. When this object
is set to disabled (2), PMTU-D is not done even if the
application requests to do so."
DEFVAL { disabled }
::= { snMspsIpIp 12 }
snMspsIpPmtuEntryAge OBJECT-TYPE
SYNTAX Integer32 (5..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the timeout in minutes, after which
the estimate of a PMTU is considered stale. After the
configured minutes the estimate of the PMTU is increased.
When Set to inifinity (255), detection in increase of
PMTU is not done."
DEFVAL { 10 }
::= { snMspsIpIp 13 }
-- the ICMP group
snMspsIcmpSendRedirectEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Redirect Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 1 }
snMspsIcmpSendUnreachableEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Unreachable Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 2 }
snMspsIcmpSendEchoReplyEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Echo Reply Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 3 }
snMspsIcmpNetMaskReplyEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Net Mask Reply Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 4 }
snMspsIcmpTimeStampReplyEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Allow sending ICMP Time stamp reply Message "
DEFVAL { enabled }
::= { snMspsIpIcmp 5 }
snMspsIcmpInDomainNameRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Requests
received."
::= { snMspsIpIcmp 6 }
snMspsIcmpInDomainNameReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Replies
received."
::= { snMspsIpIcmp 7 }
snMspsIcmpOutDomainNameRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Requests
send."
::= { snMspsIpIcmp 8 }
snMspsIcmpOutDomainNameReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Domain Name Replies
send."
::= { snMspsIpIcmp 9 }
snMspsIcmpDirectQueryEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DNS Direct Query will be enabled or disabled
accordingly"
DEFVAL { disabled }
-- By default disabled because this is an Experimental Protocol.
::= { snMspsIpIcmp 10 }
snMspsDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain Name of the system, used to send when
replies to DNS Direct Query."
::= { snMspsIpIcmp 11 }
snMspsTimeToLive OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds untill which the name
can be cached."
::= { snMspsIpIcmp 12 }
snMspsIcmpInSecurityFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Security Failure messages
received."
::= { snMspsIpIcmp 13 }
snMspsIcmpOutSecurityFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Security Failure messages
sent."
::= { snMspsIpIcmp 14 }
snMspsIcmpSendSecurityFailuresEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow sending Security Failure messages."
DEFVAL { enabled }
::= { snMspsIpIcmp 15 }
snMspsIcmpRecvSecurityFailuresEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow Recieving Security Failure messages."
DEFVAL { enabled }
::= { snMspsIpIcmp 16 }
snMspsIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP addresses on every Interface."
::= { snMspsIpIp 18 }
snMspsIpAddressEntry OBJECT-TYPE
SYNTAX SnMspsIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The individual entry in the above table."
INDEX {
snMspsIpAddrTabAddress
}
::= { snMspsIpAddressTable 1 }
SnMspsIpAddressEntry ::=
SEQUENCE {
snMspsIpAddrTabIfaceId
Integer32,
snMspsIpAddrTabAddress
IpAddress,
snMspsIpAddrTabAdvertise
TruthValue,
snMspsIpAddrTabPreflevel
Integer32,
snMspsIpAddrTabStatus
RowStatus
}
snMspsIpAddrTabIfaceId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number to which the IP address
belongs to."
::= { snMspsIpAddressEntry 1 }
snMspsIpAddrTabAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One of the router's IP addresses."
::= { snMspsIpAddressEntry 2 }
snMspsIpAddrTabAdvertise OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A flag indicating whether or not the address is
to be advertised."
::= { snMspsIpAddressEntry 3 }
snMspsIpAddrTabPreflevel OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preferability of the address as a default
router address, relative to other router addresses on
the same subnet. A 32-bit, signed, twos-complement
integer, with higher values meaning more preferable."
::= { snMspsIpAddressEntry 4 }
snMspsIpAddrTabStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsIpAddressEntry 5 }
--List of Default Routers.
snMspsIpRtrLstTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIpRtrLstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of default router addresses. Used when system
functions as a host.Maintained as per RFC 1122."
::= { snMspsIpIp 19 }
snMspsIpRtrLstEntry OBJECT-TYPE
SYNTAX SnMspsIpRtrLstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The individual entry in the above table."
INDEX { snMspsIpRtrLstAddress }
::= { snMspsIpRtrLstTable 1 }
SnMspsIpRtrLstEntry ::=
SEQUENCE {
snMspsIpRtrLstIface
Integer32,
snMspsIpRtrLstAddress
IpAddress,
snMspsIpRtrLstPreflevel
Integer32,
snMspsIpRtrLstStatic
TruthValue,
snMspsIpRtrLstStatus
RowStatus
}
snMspsIpRtrLstIface OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface via which the router could be
reached."
::= { snMspsIpRtrLstEntry 1 }
snMspsIpRtrLstAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of a default router."
::= { snMspsIpRtrLstEntry 2 }
snMspsIpRtrLstPreflevel OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preferability of the RouterAddress as a default
router address, relative to other router addresses
on the same subnet."
::= { snMspsIpRtrLstEntry 3 }
snMspsIpRtrLstStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entry states how the default router address
was learned."
::= { snMspsIpRtrLstEntry 4 }
snMspsIpRtrLstStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsIpRtrLstEntry 5 }
-- IPIF table
snMspsIpifTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIpifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP interface table which maintains the interface specific configurable parameters of IP."
::= { snMspsIpIp 23 }
snMspsIpifEntry OBJECT-TYPE
SYNTAX SnMspsIpifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular interface specific IP information."
INDEX {
snMspsIpifIndex
}
::= { snMspsIpifTable 1 }
SnMspsIpifEntry ::=
SEQUENCE {
snMspsIpifIndex
Integer32,
snMspsIpifMaxReasmSize
Integer32,
snMspsIpifIcmpRedirectEnable
INTEGER,
snMspsIpifDrtBcastFwdingEnable
INTEGER,
snMspsIpifProxyArpAdminStatus
INTEGER
}
snMspsIpifIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in MIB II."
::= { snMspsIpifEntry 1 }
snMspsIpifMaxReasmSize OBJECT-TYPE
SYNTAX Integer32 (1024..33280)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum size of the fragmented IP datagram received
on this interface that can be considered for reassembly."
::= { snMspsIpifEntry 2 }
snMspsIpifIcmpRedirectEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling or Diabling of the ICMP redirect messages on an
interface basis."
::= { snMspsIpifEntry 3 }
snMspsIpifDrtBcastFwdingEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling of Directed broadcast forwarding on that
interface."
::= { snMspsIpifEntry 4 }
snMspsIpifProxyArpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or Disables Proxy ARP Feature for that
interface. By default, this object
should have the value disabled(2)."
DEFVAL { disabled }
::= { snMspsIpifEntry 5 }
snMspsArpCacheTimeout OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Time after which the entry in cache is deleted "
DEFVAL { 7200 }
::= { snMspsIpArp 1 }
snMspsArpCachePendTime OBJECT-TYPE
SYNTAX Integer32 (30..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Time for which an unresolved entry will be
held until response is received "
DEFVAL { 30 }
::= { snMspsIpArp 2 }
snMspsArpMaxRetries OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Maximum number of retry attempts before aborting
resolving "
DEFVAL { 3 }
::= { snMspsIpArp 3 }
snMspsArpTableScanType OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " value of zero(0) disable arp table scan "
DEFVAL { 4 }
::= { snMspsIpArp 4 }
snMspsIpProxyArpClient OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables Proxy ARP Client Feature.
By default, this object should have the value
disabled(2)."
::= { snMspsIpIp 25 }
snMspsDcp OBJECT-TYPE
SYNTAX INTEGER {
dcp-read-write (1),
dcp-read-only (2),
dcp-off (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value dcp-read-write (1) will automatically run DCP (Detection & Configuration Protocoll).
The value dcp-read-only allows DCP only to read parameters.
The value dcp-off(3) will inhibit DCP."
::= { snMspsIpIp 30 }
snMspsAgentReceiveOnAllKnownVLANs OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting AgentReceiveOnAllKnownVLANs to Enable(1)
enables the reception of IP traffic for the agent on all VLANs.
This means the agent accepts incoming connections on all the VLANs.
For outgoing traffic like sending SNMP traps and
connection to the e-mail server the Agent VLAN is used."
::= { snMspsIpIp 31 }
-- It adds IP protocol independence.
snMspsInetStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IP Static Routing table. This table displays
both active and inactive static routes"
::= { snMspsIpIp 32 }
snMspsInetStaticRouteEntry OBJECT-TYPE
SYNTAX SnMspsInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination, under a
particular policy (as reflected in the
snMspsInetStaticRoutePolicy object).
Implementers need to be aware that if the total number
of elements (octets or sub-identifiers) in
snMspsInetStaticRouteDest, snMspsInetStaticRoutePolicy, and
snMspsInetStaticRouteNextHop exceeds 111, then OIDs of column
instances in this table will have more than 128 sub-
identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3."
INDEX {
snMspsInetStaticRouteDestType,
snMspsInetStaticRouteDest,
snMspsInetStaticRoutePfxLen,
snMspsInetStaticRoutePolicy,
snMspsInetStaticRouteNextHopType,
snMspsInetStaticRouteNextHop
}
::= { snMspsInetStaticRouteTable 1 }
SnMspsInetStaticRouteEntry ::= SEQUENCE {
snMspsInetStaticRouteDestType InetAddressType,
snMspsInetStaticRouteDest InetAddress,
snMspsInetStaticRoutePfxLen InetAddressPrefixLength,
snMspsInetStaticRoutePolicy OBJECT IDENTIFIER,
snMspsInetStaticRouteNextHopType InetAddressType,
snMspsInetStaticRouteNextHop InetAddress,
snMspsInetStaticRouteIfIndex InterfaceIndexOrZero,
snMspsInetStaticRouteType INTEGER,
snMspsInetStaticRouteProto IANAipRouteProtocol,
snMspsInetStaticRouteAge Gauge32,
snMspsInetStaticRouteNextHopAS InetAutonomousSystemNumber,
snMspsInetStaticRouteMetric1 Integer32,
snMspsInetStaticRouteStatus RowStatus
}
snMspsInetStaticRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the snMspsInetStaticRouteDest address, as defined
in the InetAddress MIB.
Only those address types that may appear in an actual
routing table are allowed as values of this object.
IPv4 and IPv6 Static Routes are supported."
::= { snMspsInetStaticRouteEntry 1 }
snMspsInetStaticRouteDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route.
The type of this address is determined by the value of
the snMspsInetStaticRouteDestType object. IPv4 and IPv6
Static Routes are supported.
The values for the index objects snMspsInetStaticRouteDest and
snMspsInetStaticRoutePfxLen must be consistent. When the value
of snMspsInetStaticRouteDest (excluding the zone index, if one
is present) is x, then the bitwise logical-AND
of x with the value of the mask formed from the
corresponding index object snMspsInetStaticRoutePfxLen MUST be
equal to x. If not, then the index pair is not
consistent and an inconsistentName error must be
returned on SET or CREATE requests."
::= { snMspsInetStaticRouteEntry 2 }
snMspsInetStaticRoutePfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
snMspsInetStaticRouteDest field.
The values for the index objects snMspsInetStaticRouteDest and
snMspsInetStaticRoutePfxLen must be consistent. When the value
of snMspsInetStaticRouteDest (excluding the zone index, if one
is present) is x, then the bitwise logical-AND
of x with the value of the mask formed from the
corresponding index object snMspsInetStaticRoutePfxLen MUST be
equal to x. If not, then the index pair is not
consistent and an inconsistentName error must be
returned on SET or CREATE requests."
::= { snMspsInetStaticRouteEntry 3 }
snMspsInetStaticRoutePolicy OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is an opaque object without any defined
semantics. Its purpose is to serve as an additional
index that may delineate between multiple entries to
the same destination. The value { 0 0 } shall be used
as the default value for this object."
::= { snMspsInetStaticRouteEntry 4 }
snMspsInetStaticRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the snMspsInetStaticRouteNextHop address, as
defined in the InetAddress MIB.
Value should be set to unknown(0) for non-remote
routes.
Only those address types that may appear in an actual
routing table are allowed as values of this object.
Only IPv4 Static Routes are supported currently"
::= { snMspsInetStaticRouteEntry 5 }
snMspsInetStaticRouteNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next system en
route. For non-remote routes, a zero length string.
The type of this address is determined by the value of
the snMspsInetStaticRouteNextHopType object.
Only IPv4 Static Routes are supported currently"
::= { snMspsInetStaticRouteEntry 6 }
snMspsInetStaticRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached.
For active static routes this object will have a valid
Interface index. For in-active static routes this object
will have invalid interface index"
::= { snMspsInetStaticRouteEntry 7 }
snMspsInetStaticRouteType OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- not specified by this MIB
reject (2), -- route that discards traffic and
-- returns ICMP notification
local (3), -- local interface
remote (4), -- remote destination
blackhole(5) -- route that discards traffic
-- silently
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of route. Note that local(3) refers to a
route for which the next hop is the final destination;
remote(4) refers to a route for which the next hop is
not the final destination.
Routes that do not result in traffic forwarding or
rejection should not be displayed, even if the
implementation keeps them stored internally.
reject(2) refers to a route that, if matched, discards
the message as unreachable and returns a notification
(e.g., ICMP error) to the message sender. This is used
in some protocols as a means of correctly aggregating
routes.
blackhole(5) refers to a route that, if matched,
discards the message silently."
::= { snMspsInetStaticRouteEntry 8 }
snMspsInetStaticRouteProto OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this route was learned.
Inclusion of values for gateway routing protocols is
not intended to imply that hosts should support those
protocols.
Dyanmic routes are not supported in this MIB Table. This
table supports only active and inactive of IPv4 and IPV6
Static Routes."
::= { snMspsInetStaticRouteEntry 9 }
snMspsInetStaticRouteAge OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last updated
or otherwise determined to be correct. Note that no
semantics of 'too old' can be implied, except through
knowledge of the routing protocol by which the route
was learned."
::= { snMspsInetStaticRouteEntry 10 }
snMspsInetStaticRouteNextHopAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Autonomous System Number of the Next Hop. The
semantics of this object are determined by the routing-
protocol specified in the route's snMspsInetStaticRouteProto
value. When this object is unknown or not relevant, its
value should be set to zero."
DEFVAL { 0 }
::= { snMspsInetStaticRouteEntry 11 }
snMspsInetStaticRouteMetric1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The primary routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's snMspsInetStaticRouteProto
value. If this metric is not used, its value should be
set to -1."
DEFVAL { -1 }
::= { snMspsInetStaticRouteEntry 12 }
snMspsInetStaticRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to row
installation and removal conventions.
A row entry cannot be modified when the status is
marked as active(1)."
::= { snMspsInetStaticRouteEntry 13 }
snMspsRcdpMode OBJECT-TYPE
SYNTAX INTEGER {
rcdp-off (0),
rcdp-read-only (1),
rcdp-read-write (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value rcdp-read-write(2) allows RCDP to read and write parameters.
The value rcdp-read-only(1) allows RCDP only read parameters. The value rcdp-off(0) will inhibit RCDP."
::= { snMspsIpIp 33 }
snMspsTraceRouteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsTraceRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TraceRoute Configuration Table"
::= { snMspsIpIp 40 }
snMspsTraceRouteConfigEntry OBJECT-TYPE
SYNTAX SnMspsTraceRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table Contains the configuration information about a particular
traceroute operation."
INDEX {
snMspsTraceRouteConfigDestType,
snMspsTraceRouteConfigDest
}
::= { snMspsTraceRouteConfigTable 1 }
SnMspsTraceRouteConfigEntry ::= SEQUENCE {
snMspsTraceRouteConfigDestType InetAddressType,
snMspsTraceRouteConfigDest InetAddress,
snMspsTraceRouteConfigOperStatus INTEGER,
snMspsTraceRouteConfigError INTEGER,
snMspsTraceRouteConfigRowStatus RowStatus
}
snMspsTraceRouteConfigDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Type of trace route destination specified in
snMspsTraceRouteConfigDest"
::= { snMspsTraceRouteConfigEntry 1 }
snMspsTraceRouteConfigDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination address to which the route has to
be traced."
::= { snMspsTraceRouteConfigEntry 2 }
snMspsTraceRouteConfigOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted (1),
inProgress (2),
completed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Status for the traceroute operation."
::= { snMspsTraceRouteConfigEntry 3 }
snMspsTraceRouteConfigError OBJECT-TYPE
SYNTAX INTEGER {
noError (0),
destinationUnreachable (1),
addressUnreachable (2),
ttlExceeded (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Status after completion of traceroute operation."
::= { snMspsTraceRouteConfigEntry 4 }
snMspsTraceRouteConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates and Initiates the traceroute operation for the
destination snMspsTraceRouteConfigDest. Log for the
traceroute operation can be viewed in snMspsTraceRouteTable."
::= { snMspsTraceRouteConfigEntry 5 }
snMspsTraceRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsTraceRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Trace route result for the destination
specified in snMspsTraceRouteConfigTable."
::= { snMspsIpIp 43 }
snMspsTraceRouteEntry OBJECT-TYPE
SYNTAX SnMspsTraceRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about the
intermediate nodes on the way to the destination
specified in snMspsTraceRouteConfigTable."
INDEX {
snMspsTraceRouteDestType,
snMspsTraceRouteDest,
snMspsTraceRouteHopCount
}
::= { snMspsTraceRouteTable 1 }
SnMspsTraceRouteEntry ::= SEQUENCE {
snMspsTraceRouteDestType InetAddressType,
snMspsTraceRouteDest InetAddress,
snMspsTraceRouteHopCount Unsigned32,
snMspsTraceRouteIntermHopType InetAddressType,
snMspsTraceRouteIntermHop InetAddress,
snMspsTraceReachTime1 Integer32,
snMspsTraceReachTime2 Integer32,
snMspsTraceReachTime3 Integer32
}
snMspsTraceRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address Type of trace route destination specified in
snMspsTraceRouteDest"
::= { snMspsTraceRouteEntry 1 }
snMspsTraceRouteDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination address to which the route has to
be traced."
::= { snMspsTraceRouteEntry 2 }
snMspsTraceRouteHopCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Count of the Number of Hops required to reach
the intermediate node snMspsTraceRouteIntermHop."
::= { snMspsTraceRouteEntry 3 }
snMspsTraceRouteIntermHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address type for the snMspsTraceRouteIntermHop"
::= { snMspsTraceRouteEntry 4 }
snMspsTraceRouteIntermHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address of the intermediate node or the end destination
snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 5 }
snMspsTraceReachTime1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in milli seconds, required to reach the
intermediate node snMspsTraceRouteIntermHop.
The value of '-1' denotes that the response was
not received from the node snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 6 }
snMspsTraceReachTime2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in milli seconds, required to reach the
intermediate node snMspsTraceRouteIntermHop
for the second time.
The value of '-1' denotes that the response was
not received from the node snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 7 }
snMspsTraceReachTime3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in milli seconds, required to reach the
intermediate node snMspsTraceRouteIntermHop
for the third time.
The value of '-1' denotes that the response was
not received from the node snMspsTraceRouteDest."
::= { snMspsTraceRouteEntry 8 }
-- Unused snMspsIpIp 44-49
snMspsIpNextHopArpKeepAliveStatus OBJECT-TYPE
SYNTAX INTEGER {
not-supported (0),
enabled (1),
disabled (2),
dynamictostatic (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of Value enabled(1), enables dynamic ARP Resolution for all the
nexthop gateway addresses of the best routes present in the system and prevents ARP Table flushing.
Dynamic ARP Resolution will be triggered every
snMspsIpNextHopArpKeepAliveTime interval, for all the unresolved
nexthop gateway addresses present in the system.
Setting of Value dynamictostatic(3), does not prevent ARP table flushing, but converts the ARP entries for
dynamically discovered nexthop gateway addresses to static ARP entries. Validity of these entries will
then be checked cyclically.
Setting of Value disabled(2), disables this feature."
DEFVAL { disabled }
::= { snMspsIpIp 50 }
snMspsIpNextHopArpKeepAliveTime OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time after which the dynamic ARP resolution will be triggered if
snMspsIpNextHopArpKeepAliveStatus is true."
DEFVAL { 30 }
::= { snMspsIpIp 51 }
snMspsIpSingleHopInterVlanRouting OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the SingleHopInterVlanRouting -
which enables routing in between connected/local routes
even if the routing is not enabled/supported"
DEFVAL { 2 }
::= { snMspsIpIp 52 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
snMspsIpACDModeStatus OBJECT-TYPE
SYNTAX INTEGER {
acdModeStatusDisabled (0),
acdModeStatusEnabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether IPV4 Address Collision Detection is activated or not for all IP interfaces."
DEFVAL { acdModeStatusEnabled }
::= { snMspsIpACD 1 }
snMspsIpACDDefendingMode OBJECT-TYPE
SYNTAX INTEGER {
acdDefendingModeNeverGiveUp (0),
acdDefendingModeAttemptToDefend (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies defending mode of IPV4 Address Collision Detection for all IP interfaces."
DEFVAL { acdDefendingModeNeverGiveUp }
::= { snMspsIpACD 2 }
-- ----------------------
-- snMspsIp6.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- IPv6 Proprietary MIB Definition
--
--
-- Copyright (c) 2014 Siemens AG
-- All rights reserved.
-- ----------------------
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
InterfaceList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
interfaces, with the first octet specifying router-ports 1 through
8, the second octet specifying router-ports 9 through 16, etc.
Within each octet, the most significant bit represents the lowest
numbered router-port or L3 interface, and the least significant bit
represents the highest numbered port. Thus, each L3 interface
of the switch is represented by a single bit within the
value of this object. If that bit has a value of '1',
then that L3 interface is included in the set of interfaces; the interface
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
snMspsIpIp6 OBJECT IDENTIFIER ::= { snMspsIp6 1 }
snMspsIp6Icmp OBJECT IDENTIFIER ::= { snMspsIp6 2 }
snMspsIp6Udp OBJECT IDENTIFIER ::= { snMspsIp6 3 }
snMspsIp6Tunnel OBJECT IDENTIFIER ::= {snMspsIp6 5 }
snMspsIp6Route OBJECT IDENTIFIER ::= {snMspsIp6 6 }
-- the IPv6 general group
-- snMspsIpIp6 GROUP
snMspsIp6Scalars OBJECT IDENTIFIER ::= { snMspsIpIp6 1 }
snMspsIp6Tables OBJECT IDENTIFIER ::= { snMspsIpIp6 2 }
-- snMspsIp6Scalars BEGIN
snMspsIp6NdCacheMaxRetries OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of retries
that can be attempted upon resolving the 'physical'
address of an IPv6 address during address resolution
or unreachability detection."
DEFVAL { 3 }
::= { snMspsIp6Scalars 1 }
snMspsIp6PmtuConfigStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable or disable Path MTU Discovery for the node."
DEFVAL { enable }
::= { snMspsIp6Scalars 2 }
snMspsIp6PmtuTimeOutInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in minutes after which the path MTU entry times out."
DEFVAL { 60 }
::= { snMspsIp6Scalars 3 }
-- IPv6 Jumbograms Scalars
snMspsIp6JumboEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable or disable IPv6 Jumbogram facility for the node."
DEFVAL { enable }
::= { snMspsIp6Scalars 4 }
snMspsIp6NumOfSendJumbo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IPv6 Jumbograms sent from the node."
::= { snMspsIp6Scalars 5 }
snMspsIp6NumOfRecvJumbo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IPv6 Jumbograms received."
::= { snMspsIp6Scalars 6 }
snMspsIp6ErrJumbo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IPv6 Error Jumbograms received or transmitted."
::= { snMspsIp6Scalars 7 }
snMspsIp6GlobalDebug OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the tracing in the selected submodule in IP6. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Different submodule Tracing -
BIT 24 - Tracing in IP6 module.
BIT 25 - Tracing in ICMP6 submodule.
BIT 26 - Tracing in ND6 submodule.
BIT 27 - Tracing in UDP6 submodule.
BIT 29 - Tracing in PING6 submodule.
The remaining bits are unused.The combination of levels and submodules
are allowed i.e. Tracing can be allowed at all failure and data path
level in All submodules by setting the BIT appropriately.
For Example, setting the debug value to 00000001000000000000000001000000
will enable all failure trace prints in IP6 module."
::= { snMspsIp6Scalars 8 }
-- sizing wanted scalars - begin
-- These Values would come into effect, if only the router is rebooted
-- after the configuration. The value of all the objects range from 1
-- to configured value, if the Minumum value is not specified in the
-- 'DESCRIPTION' part.
snMspsIp6MaxRouteEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of Route Entries that could be configured in
the system. Minumum value is 5."
::= { snMspsIp6Scalars 9 }
snMspsIp6MaxLogicalIfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of configurable Logical IPv6 Interfaces"
::= { snMspsIp6Scalars 10 }
snMspsIp6MaxTunnelIfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of configurable Tunnel Interfaces"
::= { snMspsIp6Scalars 11 }
snMspsIp6MaxAddresses OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of Configurable IPv6 Interfaces."
::= { snMspsIp6Scalars 12 }
snMspsIp6MaxFragReasmEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object could be used for 2 purpose.
1. Maximum Number of IP6 datagrams awaiting reassembly.
2. Maximum Number of fragments that could be allowed in
a single reassembly list."
::= { snMspsIp6Scalars 13 }
snMspsIp6Nd6MaxCacheEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of ND Cache Entries."
::= { snMspsIp6Scalars 14 }
snMspsIp6PmtuMaxDest OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Number of PMTU Table Entries"
::= { snMspsIp6Scalars 15 }
-- sizing wanted scalars - end
snMspsIp6RFC5095Compatibility OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the IPv6 node is configured to be RFC5095 compatible,
then it should treat Type 0 Routing Header as invalid
routing header type."
DEFVAL {enabled}
::= { snMspsIp6Scalars 16 }
-- snMspsIp6Scalars END
-- snMspsIp6Tables BEGIN
-- IPv6 Interface Table
-- The IPv6 Interface table defines the logical interfaces on which
-- IPv6 protocol is running. These include LAN interfaces, Point-to-
-- Point interfaces, IPv6 over IPv4 Tunnel interfaces and NBMA
-- interfaces.
-- Entries of this table are created/deleted from SNMP.
snMspsIp6IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Interface table contains information on the
entity's internetwork-layer interfaces on which IPv6.
protocol is enabled. An IPv6 interface constitutes a logical
network layer attachment to the layer immediately below
IPv6. These include LAN interfaces, Point-to-Point interfaces,
NBMA interfaces and IPv6 over IPv4 Tunnel interfaces."
::= { snMspsIp6Tables 1 }
snMspsIp6IfEntry OBJECT-TYPE
SYNTAX SnMspsIp6IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An interface entry containing objects about a particular
IPv6 interface. The entry is created or deleted from SNMP."
INDEX { snMspsIp6IfIndex }
::= { snMspsIp6IfTable 1 }
SnMspsIp6IfEntry ::= SEQUENCE {
snMspsIp6IfIndex
InterfaceIndex,
snMspsIp6IfType
INTEGER,
snMspsIp6IfPortNum
Integer32,
snMspsIp6IfCircuitNum
Integer32,
snMspsIp6IfToken
OCTET STRING,
snMspsIp6IfAdminStatus
INTEGER,
snMspsIp6IfOperStatus
INTEGER,
snMspsIp6IfRouterAdvStatus
INTEGER,
snMspsIp6IfRouterAdvFlags
INTEGER,
snMspsIp6IfHopLimit
Integer32,
snMspsIp6IfDefRouterTime
Integer32,
snMspsIp6IfReachableTime
Integer32,
snMspsIp6IfRetransmitTime
Integer32,
snMspsIp6IfDelayProbeTime
Integer32,
snMspsIp6IfPrefixAdvStatus
INTEGER,
snMspsIp6IfMinRouterAdvTime
Integer32,
snMspsIp6IfMaxRouterAdvTime
Integer32,
snMspsIp6IfDADRetries
Integer32,
snMspsIp6IfForwarding
INTEGER,
snMspsIp6IfRoutingStatus
INTEGER,
snMspsIp6IfIcmpErrInterval
Integer32,
snMspsIp6IfIcmpTokenBucketSize
Integer32,
snMspsIp6IfDestUnreachableMsg
INTEGER,
snMspsIp6IfAddressAutoConfStatus
INTEGER
}
snMspsIp6IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value identifying the particular IPv6
interface."
::= { snMspsIp6IfEntry 1 }
snMspsIp6IfType OBJECT-TYPE
SYNTAX INTEGER {
ethernetcsmacd(6),
ppp(23),
framerelay(32),
tunnel(131),
l3ipvlan(136)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of interface immediately `below' the network layer
in the protocol stack."
::= { snMspsIp6IfEntry 2 }
snMspsIp6IfPortNum OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the 'interface' over which this
network interface operates and is dependent on the value of
snMspsIp6IfType. This object reflects the ifindex value of
ifTable."
::= { snMspsIp6IfEntry 3 }
snMspsIp6IfCircuitNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the circuit over which this network
interface operates and is dependent on the value of
snMspsIp6IfType. If the data-link layer is Ethernet, PPP or
IPv4 Tunnel, this object can have only value of zero. If the
data-link layer is Frame Relay, this object requires a non-zero
value which will identify the Frame Relay virtual circuit."
::= { snMspsIp6IfEntry 4 }
snMspsIp6IfToken OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address token for this interface that is (at least)
unique on the link this interface is attached to. This token
can be specified only if the snMspsIp6IfType is frame-relay(32). For
other interface types, the interface token is autoconfigured
according to the rules of the link type this interface is
attached to. This address token is combined with the prefix
'fe80' to form a link-local IPv6 address on this interface."
::= { snMspsIp6IfEntry 5 }
snMspsIp6IfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether IPv6 is enabled/disabled on this interface.
When lower layer indicates the creation of the interface, an
entry will be create in IPv6 interfac table with
snMspsIp6IfAdminStatus in down(2) state. Either on setting this
object as up(1) or configuring any IPv6 address over this
interface, will set the snMspsIp6IfAdminStatus to up(1) state.
If this object is set to down(2), and if no IPv6 address is
configured for this interface, snMspsIp6IfAdminStatus goes
down(2). Else the Status remains up(1), as long as the
IPv6 address are present. Once these addresses are removed,
the status goes to down(2)."
::= { snMspsIp6IfEntry 6 }
snMspsIp6IfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
stale(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of interface. It is up(1) if the
snMspsIp6IfAdminStatus is 'up' and the layer below the network
layer is also operational. Otherwise it is down(2)."
::= { snMspsIp6IfEntry 7 }
snMspsIp6IfRouterAdvStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router advertisement status on this interface. When
the object is set to enabled(1), router advertisements can be
allowed on the IPv6 interface. Otherwise, router advertisements
are not allowed."
DEFVAL { disabled}
::= { snMspsIp6IfEntry 8 }
snMspsIp6IfRouterAdvFlags OBJECT-TYPE
SYNTAX INTEGER {
mbit(1),
obit(2),
nombit(3),
noobit(4),
mobits(5),
none(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the bits to be set in the router
advertisements sent by this entity on this interface.
M-bit set in the router advertisement indicates hosts
to configure an address by stateful protocol means. O-bit
set in the router advertisement indicates hosts to configure
other non-address information by stateful means."
DEFVAL { none }
::= { snMspsIp6IfEntry 9 }
snMspsIp6IfHopLimit OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Hop Limit value to be placed in the router advertisements
sent on this IPv6 interface."
DEFVAL { 64 }
::= { snMspsIp6IfEntry 10 }
snMspsIp6IfDefRouterTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default router time to be indicated in the router
advertisements sent on this IPv6 interface. This defines the
time in seconds for which this entity acts as the default
router for all all hosts on the interface. A value of 0
indicates that the entity is not a default router.
The value can be configured in the range between
snMspsIp6IfMaxRouterAdvTime and 9000 seconds."
DEFVAL { 0 }
::= { snMspsIp6IfEntry 11 }
snMspsIp6IfReachableTime OBJECT-TYPE
SYNTAX Integer32 (0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reachable time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds that a neighboring
node is considered to be reachable after having received the
reachability confirmation from that node."
DEFVAL { 30 }
::= { snMspsIp6IfEntry 12 }
snMspsIp6IfRetransmitTime OBJECT-TYPE
SYNTAX Integer32 (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The retransmit time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds between
retransmitted Neighbor Solicitations and is used during
address resolution, unreachability detection and
duplicate address detection."
DEFVAL { 1 }
::= { snMspsIp6IfEntry 13 }
snMspsIp6IfDelayProbeTime OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds to delay before starting unreachability
probing of neighbor entries which are stale."
DEFVAL { 5 }
::= { snMspsIp6IfEntry 14 }
snMspsIp6IfPrefixAdvStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prefix advertisement status on this IPv6 interface.
Object value enabled(1) allows the configured prefixes to
be advertised in router advertisements. Otherwise, the prefixes
are not sent in router advertisements."
DEFVAL { enabled }
::= { snMspsIp6IfEntry 15 }
snMspsIp6IfMinRouterAdvTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time in seconds allowed between sending
unsolicited router advertisements.The default value is
one-third the default value of snMspsIp6IfMaxRouterAdvTime.
The value can be configured in the range between 3 seconds
and three-fourth of snMspsIp6IfMaxRouterAdvTime."
DEFVAL { 198 }
::= { snMspsIp6IfEntry 16 }
snMspsIp6IfMaxRouterAdvTime OBJECT-TYPE
SYNTAX Integer32 (4..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time in seconds between sending unsolicited
router advertisements. Router advertisements are sent
periodically at a random interval between the values
specified by snMspsIp6IfMinRouterAdvTime and
snMspsIp6IfMaxRouterAdvTime."
DEFVAL { 600 }
::= { snMspsIp6IfEntry 17 }
snMspsIp6IfDADRetries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of neighbor solicitations sent for
the purpose of duplicate address detection on a tentative
address."
DEFVAL { 1 }
::= { snMspsIp6IfEntry 18 }
snMspsIp6IfForwarding OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to configure IPv6 routing and forwarding
on this interface. The default value is set to enabled."
DEFVAL { 1 }
::= { snMspsIp6IfEntry 19 }
snMspsIp6IfRoutingStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the current routing status
on this interface. This is based on the global IPv6
forwarding status of the mib object 'ipv6Forwarding'.
If 'ipv6Forwarding' is set to disabled, the routing
status is set to disabled on all the interfaces.
If 'ipv6Forwarding' is set to enabled, the value
taken by this MIB objet is same as 'snMspsIp6IfForwarding'"
::= { snMspsIp6IfEntry 20 }
snMspsIp6IfIcmpErrInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval between tokens being added to the ICMPv6 token bucket."
DEFVAL { 100 }
::= { snMspsIp6IfEntry 21 }
snMspsIp6IfIcmpTokenBucketSize OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of tokens stored in the ICMPv6 bucket"
DEFVAL { 10 }
::= { snMspsIp6IfEntry 22 }
snMspsIp6IfDestUnreachableMsg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether ICMPv6 destination unreachable messages are
enabled/disabled on this interface."
DEFVAL { enabled }
::= { snMspsIp6IfEntry 23 }
snMspsIp6IfAddressAutoConfStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of stateless address
auto-configuration (SLAAC) on this interface, i.e. whether to
use prefix information from Router Advertisement packets to
autoconfigure IPv6 address on this interface.
This is applicable when the device is IPv6 host"
DEFVAL { enabled }
::= { snMspsIp6IfEntry 24 }
-- IPv6 Interface statistic table
snMspsIp6IfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6IfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 interface traffic statistics"
::= { snMspsIp6Tables 2 }
snMspsIp6IfStatsEntry OBJECT-TYPE
SYNTAX SnMspsIp6IfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An interface statistics entry containing objects
at a particular IPv6 interface."
INDEX { snMspsIp6IfStatsIndex }
::= { snMspsIp6IfStatsTable 1 }
SnMspsIp6IfStatsEntry ::=
SEQUENCE {
snMspsIp6IfStatsIndex
InterfaceIndex,
snMspsIp6IfStatsInReceives
Counter32,
snMspsIp6IfStatsInHdrErrors
Counter32,
snMspsIp6IfStatsTooBigErrors
Counter32,
snMspsIp6IfStatsInAddrErrors
Counter32,
snMspsIp6IfStatsForwDatagrams
Counter32,
snMspsIp6IfStatsInUnknownProtos
Counter32,
snMspsIp6IfStatsInDiscards
Counter32,
snMspsIp6IfStatsInDelivers
Counter32,
snMspsIp6IfStatsOutRequests
Counter32,
snMspsIp6IfStatsOutDiscards
Counter32,
snMspsIp6IfStatsOutNoRoutes
Counter32,
snMspsIp6IfStatsReasmReqds
Counter32,
snMspsIp6IfStatsReasmOKs
Counter32,
snMspsIp6IfStatsReasmFails
Counter32,
snMspsIp6IfStatsFragOKs
Counter32,
snMspsIp6IfStatsFragFails
Counter32,
snMspsIp6IfStatsFragCreates
Counter32,
snMspsIp6IfStatsInMcastPkts
Counter32,
snMspsIp6IfStatsOutMcastPkts
Counter32,
snMspsIp6IfStatsInTruncatedPkts
Counter32,
snMspsIp6IfStatsInRouterSols
Counter32,
snMspsIp6IfStatsInRouterAdvs
Counter32,
snMspsIp6IfStatsInNeighSols
Counter32,
snMspsIp6IfStatsInNeighAdvs
Counter32,
snMspsIp6IfStatsInRedirects
Counter32,
snMspsIp6IfStatsOutRouterSols
Counter32,
snMspsIp6IfStatsOutRouterAdvs
Counter32,
snMspsIp6IfStatsOutNeighSols
Counter32,
snMspsIp6IfStatsOutNeighAdvs
Counter32,
snMspsIp6IfStatsOutRedirects
Counter32,
snMspsIp6IfStatsLastRouterAdvTime
TimeTicks,
snMspsIp6IfStatsNextRouterAdvTime
TimeTicks,
snMspsIp6IfStatsIcmp6ErrRateLmtd
Counter32
}
snMspsIp6IfStatsIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface for which this statistics are maintained.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of snMspsIp6IfIndex."
::= { snMspsIp6IfStatsEntry 1 }
snMspsIp6IfStatsInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of input datagrams received from
interfaces, including those received in error."
::= { snMspsIp6IfStatsEntry 2 }
snMspsIp6IfStatsInHdrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of input datagrams discarded due to
errors in their IPv6 headers, including version
number mismatch, other format errors, hop count
exceeded, errors discovered in processing their
IPv6 options, etc."
::= { snMspsIp6IfStatsEntry 3 }
snMspsIp6IfStatsTooBigErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of datagrams that could not be forwarded
because their size exceeded the Path MTU"
::= { snMspsIp6IfStatsEntry 4 }
snMspsIp6IfStatsInAddrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of input datagrams discarded because
the IPv6 address in their IPv6 header's destination
field was not a valid address to be received at
this entity. This count includes invalid
addresses (e.g., ::0) and unsupported addresses
(e.g., addresses with unallocated prefixes). For
entities which are not IPv6 routers and therefore
do not forward datagrams, this counter includes
datagrams discarded because the destination address
was not a local address."
::= { snMspsIp6IfStatsEntry 5 }
snMspsIp6IfStatsForwDatagrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of input datagrams for which this
entity was not their final IPv6 destination, as a
result of which an attempt was made to find a
route to forward them to that final destination.
In entities which do not act as IPv6 routers, this
counter will include only those packets which were
Source-Routed via this entity, and the Source-
Route option processing was successful."
::= { snMspsIp6IfStatsEntry 6 }
snMspsIp6IfStatsInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of locally-addressed datagrams
received successfully but discarded because of an
unknown or unsupported protocol."
::= { snMspsIp6IfStatsEntry 7 }
snMspsIp6IfStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of input IPv6 datagrams for which no
problems were encountered to prevent their
continued processing, but which were discarded
(e.g., for lack of buffer space). Note that this
counter does not include any datagrams discarded
while awaiting re-assembly."
::= { snMspsIp6IfStatsEntry 8 }
snMspsIp6IfStatsInDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of input datagrams successfully
delivered to IPv6 user-protocols (including ICMP)."
::= { snMspsIp6IfStatsEntry 9 }
snMspsIp6IfStatsOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPv6 datagrams which local IPv6
user-protocols (including ICMP) supplied to IPv6 in
requests for transmission. Note that this counter
does not include any datagrams counted in
snMspsIp6IfStatsForwDatagrams."
::= { snMspsIp6IfStatsEntry 10 }
snMspsIp6IfStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output IPv6 datagrams for which no
problem was encountered to prevent their
transmission to their destination, but which were
discarded (e.g., for lack of buffer space). Note
that this counter would include datagrams counted
in snMspsIp6IfStatsForwDatagrams if any such packets
met this (discretionary) discard criterion."
::= { snMspsIp6IfStatsEntry 11 }
snMspsIp6IfStatsOutNoRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 datagrams discarded because no
route could be found to transmit them to their
destination. Note that this counter includes any
packets counted in snMspsIp6IfStatsForwDatagrams which
meet this `no-route' criterion. Note that this
includes any datagarms which a host cannot route
because all of its default routers are down."
::= { snMspsIp6IfStatsEntry 12 }
snMspsIp6IfStatsReasmReqds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 fragments received which needed
to be reassembled at this entity."
::= { snMspsIp6IfStatsEntry 13 }
snMspsIp6IfStatsReasmOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 datagrams successfully
reassembled."
::= { snMspsIp6IfStatsEntry 14 }
snMspsIp6IfStatsReasmFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failures detected by the IPv6 re-
assembly algorithm (for whatever reason: timed
out, errors, etc). Note that this is not
necessarily a count of discarded IPv6 fragments
since some algorithms (notably the algorithm in
RFC 815) can lose track of the number of fragments
by combining them as they are received."
::= { snMspsIp6IfStatsEntry 15 }
snMspsIp6IfStatsFragOKs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 datagrams that have been
successfully fragmented at this entity."
::= { snMspsIp6IfStatsEntry 16 }
snMspsIp6IfStatsFragFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 datagrams that have been
discarded because they needed to be fragmented
at this entity but could not be."
::= { snMspsIp6IfStatsEntry 17 }
snMspsIp6IfStatsFragCreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 datagram fragments that have
been generated as a result of fragmentation at
this entity."
::= { snMspsIp6IfStatsEntry 18 }
snMspsIp6IfStatsInMcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast packets received
by the interface"
::= { snMspsIp6IfStatsEntry 19 }
snMspsIp6IfStatsOutMcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast packets transmitted
by the interface"
::= { snMspsIp6IfStatsEntry 20 }
snMspsIp6IfStatsInTruncatedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of input datagrams discarded because
datagram frame didn't carry enough data"
::= { snMspsIp6IfStatsEntry 21 }
snMspsIp6IfStatsInRouterSols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Solicit messages
received."
::= { snMspsIp6IfStatsEntry 22 }
snMspsIp6IfStatsInRouterAdvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Advertisement messages
received."
::= { snMspsIp6IfStatsEntry 23 }
snMspsIp6IfStatsInNeighSols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Solicit messages
received."
::= { snMspsIp6IfStatsEntry 24 }
snMspsIp6IfStatsInNeighAdvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement
messages received."
::= { snMspsIp6IfStatsEntry 25 }
snMspsIp6IfStatsInRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Redirect messages
received."
::= { snMspsIp6IfStatsEntry 26 }
snMspsIp6IfStatsOutRouterSols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Solicit messages
sent."
::= { snMspsIp6IfStatsEntry 27 }
snMspsIp6IfStatsOutRouterAdvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Advertisement messages
sent."
::= { snMspsIp6IfStatsEntry 28 }
snMspsIp6IfStatsOutNeighSols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Solicitation
messages sent."
::= { snMspsIp6IfStatsEntry 29 }
snMspsIp6IfStatsOutNeighAdvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement
messages sent."
::= { snMspsIp6IfStatsEntry 30 }
snMspsIp6IfStatsOutRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Redirect messages sent."
::= { snMspsIp6IfStatsEntry 31 }
snMspsIp6IfStatsLastRouterAdvTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the last Periodic router advertisement
was sent."
::= { snMspsIp6IfStatsEntry 32 }
snMspsIp6IfStatsNextRouterAdvTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the next Periodic router advertisement
is scheduled to be sent."
::= { snMspsIp6IfStatsEntry 33 }
snMspsIp6IfStatsIcmp6ErrRateLmtd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No of rate limited ICMP6 error messages "
::= { snMspsIp6IfStatsEntry 34 }
-- IPv6 Prefix Table
-- The IPv6 Prefix table contains this entity's IPv6
-- address prefix information that are advertised along
-- with the route advertisement message.
-- Entries are created/deleted from SNMP.
snMspsIp6PrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6PrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing entity's IPv6 address prefix information."
::= { snMspsIp6Tables 3 }
snMspsIp6PrefixEntry OBJECT-TYPE
SYNTAX SnMspsIp6PrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in the IPv6 Address Prefix Table which defines a
prefix to be advertised in the route advertisement message
send on an IPv6 interface."
INDEX {snMspsIp6PrefixIndex,
snMspsIp6PrefixAddress,
snMspsIp6PrefixAddrLen
}
::= { snMspsIp6PrefixTable 1 }
SnMspsIp6PrefixEntry ::=
SEQUENCE {
snMspsIp6PrefixIndex
InterfaceIndex,
snMspsIp6PrefixAddress
OCTET STRING,
snMspsIp6PrefixAddrLen
Integer32,
snMspsIp6PrefixProfileIndex
Integer32,
snMspsIp6PrefixAdminStatus
RowStatus,
snMspsIp6SupportEmbeddedRp
TruthValue
}
snMspsIp6PrefixIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface on which this IPv6 address prefix entry is
to be advertised. The interface identified by a
particular value of this index is the same interface
as identified by the same value of snMspsIp6IfIndex."
::= { snMspsIp6PrefixEntry 1 }
snMspsIp6PrefixAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address prefix to which this entry's prefix
information pertains."
::= { snMspsIp6PrefixEntry 2 }
snMspsIp6PrefixAddrLen OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits) associated with
the IPv6 address prefix of this entry."
::= { snMspsIp6PrefixEntry 3 }
snMspsIp6PrefixProfileIndex OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index into the IPv6 Address Profile Table.
This entry of the IPv6 Address Profile table defines the
parameters for this prefix."
DEFVAL { 0 }
::= { snMspsIp6PrefixEntry 4 }
snMspsIp6PrefixAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the administrative status of the prefix.
CreateAndGo and NotInService are not supported."
::= { snMspsIp6PrefixEntry 5 }
snMspsIp6SupportEmbeddedRp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to control the usage of associated IPv6 Prefix address
as a valid embedded-RP prefix on specified interface"
DEFVAL {false}
::= { snMspsIp6PrefixEntry 6 }
-- IPv6 Address Table
-- The IPv6 address table contains this entity's IPv6
-- addressing information.
-- Entries are created/deleted from SNMP.
snMspsIp6AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing entity's IPv6 addressing information."
::= { snMspsIp6Tables 4 }
snMspsIp6AddrEntry OBJECT-TYPE
SYNTAX SnMspsIp6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in the IPv6 Address Table which defines a
unicast, anycast or link-local address on an IPv6 interface."
INDEX {snMspsIp6AddrIndex,
snMspsIp6AddrAddress,
snMspsIp6AddrPrefixLen
}
::= { snMspsIp6AddrTable 1 }
SnMspsIp6AddrEntry ::=
SEQUENCE {
snMspsIp6AddrIndex
InterfaceIndex,
snMspsIp6AddrAddress
OCTET STRING,
snMspsIp6AddrPrefixLen
Integer32,
snMspsIp6AddrAdminStatus
RowStatus,
snMspsIp6AddrType
INTEGER,
snMspsIp6AddrProfIndex
Integer32,
snMspsIp6AddrOperStatus
INTEGER,
snMspsIp6AddrScope
InetScopeType
}
snMspsIp6AddrIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface on which this IPv6 address entry exists.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of snMspsIp6IfIndex."
::= { snMspsIp6AddrEntry 1 }
snMspsIp6AddrAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address to which this entry's addressing
information pertains."
::= { snMspsIp6AddrEntry 2 }
snMspsIp6AddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 bits."
::= { snMspsIp6AddrEntry 3 }
snMspsIp6AddrAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the desired status of the address. Also a creation
of an address can trigger IPv6 to be enabled over the
interface. Similarly deletion of all the address may trigger
IPv6 to be disabled on the interface. NotInService value is
not supported."
::= { snMspsIp6AddrEntry 4 }
snMspsIp6AddrType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
linklocal(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the address is a unicast, anycast or
link-local address. Syntactically there is no difference
between a unicast address and a anycast address while a
link-local address has the prefix '0xfe80'. This
object can be modified only if snMspsIp6AddrOperStatus is
down."
::= { snMspsIp6AddrEntry 5 }
snMspsIp6AddrProfIndex OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the index into the IPv6 Address Profile Table.
This entry of the IPv6 Address Profile table defines the
parameters for this address. For a link-local address,
this object always takes the value zero and cannot be
modified from SNMP."
DEFVAL { 0 }
::= { snMspsIp6AddrEntry 6 }
snMspsIp6AddrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
tentative (1), -- DAD resolution going
-- on on the address
complete (2), -- DAD completed on the address
down(3), -- address is operationally
-- down
failed(4) -- DAD failed for the address
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the address. A
status of failed(4) indicates that a duplicate address has
been detected on this IPv6 interface. On interfaces on
which Duplicate Address Detection is not performed, this
object will take values only complete(2) and down(3)."
::= { snMspsIp6AddrEntry 7 }
snMspsIp6AddrScope OBJECT-TYPE
SYNTAX InetScopeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Scope is a 4-bit value that describes the scope of
an IPV6 address.An unicast address can possibly have 2
scopes (Linklocal and Global) only. A multicast address
can have a maximum of 11 scopes.The reserved scopes cannot be used by
the user/administrator. Only unassigned multicast scoped can be configured
and used in a given IPv6 domain as per the need."
::= { snMspsIp6AddrEntry 8 }
-- IPv6 Address Profile Table
-- This table contains parameters related to the advertisement of
-- address prefixes. Since the prefix advertisement is done only on
-- LAN interfaces, this information is kept separately from the IPv6
-- address table which contains addresses on all interfaces.
-- Entries are created/deleted from SNMP except for the first profile
-- entry which is autocreated and cannot be deleted.
snMspsIp6AddrProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6AddrProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information for an address or set of
addresses of the entity."
::= { snMspsIp6Tables 5 }
snMspsIp6AddrProfileEntry OBJECT-TYPE
SYNTAX SnMspsIp6AddrProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in the IPv6 Address Profile Table which contains
parameters related to the advertisement of address prefixes.
One or more IPv6 addresses refer to this profile through the
object snMspsIp6AddrProfIndex in the snMspsIp6AddrTable. An entry of
this table other than the first entry is created/deleted
from SNMP."
INDEX { snMspsIp6AddrProfileIndex }
::= { snMspsIp6AddrProfileTable 1 }
SnMspsIp6AddrProfileEntry ::=
SEQUENCE {
snMspsIp6AddrProfileIndex
Unsigned32,
snMspsIp6AddrProfileStatus
INTEGER,
snMspsIp6AddrProfilePrefixAdvStatus
INTEGER,
snMspsIp6AddrProfileOnLinkAdvStatus
INTEGER,
snMspsIp6AddrProfileAutoConfAdvStatus
INTEGER,
snMspsIp6AddrProfilePreferredTime
Unsigned32,
snMspsIp6AddrProfileValidTime
Unsigned32,
snMspsIp6AddrProfileValidLifeTimeFlag
INTEGER,
snMspsIp6AddrProfilePreferredLifeTimeFlag
INTEGER
}
snMspsIp6AddrProfileIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value identifying the particular IPv6 Address
profile entry. This is referred by snMspsIp6AddrProfIndex of
IPv6 Address Table. The index 0 is created with default value
during system start-up and this entry is not configurable."
::= { snMspsIp6AddrProfileEntry 1 }
snMspsIp6AddrProfileStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that the entry is valid or not. An entry other
than the first entry can be deleted by setting this object
to invalid(2)."
::= { snMspsIp6AddrProfileEntry 2 }
snMspsIp6AddrProfilePrefixAdvStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object has value on(1), the address prefixes
corresponding to those addresses which use this profile
will be advertised in router advertisements sent by this
entity. If it has value off(2), these address prefixes
will not be advertised."
DEFVAL { on }
::= { snMspsIp6AddrProfileEntry 3 }
snMspsIp6AddrProfileOnLinkAdvStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object has value on(1), the address prefixes
corresponding to those addresses which use this profile
will be advertised with on-link flag set in the router
advertisements sent by this entity. These prefixes can be
used for on-link determination by hosts which receive these
router advertisements. If the object has value off(2),
these address prefixes will not not have the on-link flag
set if advertised."
DEFVAL { on }
::= { snMspsIp6AddrProfileEntry 4 }
snMspsIp6AddrProfileAutoConfAdvStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object has value on(1), the address prefixes
corresponding to those addresses which use this profile
will be advertised with autonomous address configuration
flag set in the router advertisements sent by this entity.
These prefixes can be used for autonomous address
configuration (i.e. can be used to form a local interface
address) by hosts which receive these router advertisements.
If the object has value off(2), these address prefixes will
not not have the autonomous address configuration flag set
if advertised."
DEFVAL { on }
::= { snMspsIp6AddrProfileEntry 5 }
snMspsIp6AddrProfilePreferredTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the preferred lifetime in seconds
for the address prefixes corresponding to those addresses
which use this profile. This is sent in router advertisements
by this entity. A value of 4,294,967,295 represents
infinity.This value should be less than snMspsIp6AddrProfileValidTime"
DEFVAL { 604800 }
::= { snMspsIp6AddrProfileEntry 6 }
snMspsIp6AddrProfileValidTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the valid lifetime in seconds
for the address prefixes corresponding to those addresses
which use this profile. This is sent in router advertisements
by this entity. A value of 4,294,967,295 represents
infinity."
DEFVAL { 4294967295 }
::= { snMspsIp6AddrProfileEntry 7 }
snMspsIp6AddrProfileValidLifeTimeFlag OBJECT-TYPE
SYNTAX INTEGER {
fixed (1),
variable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting this flag to fixed (1),the router
advertisement Valid life time value is set
to fixed and by setting to variable(2), the
router advertisement Valid life time value
can decrease in real time. This flag will
synchronise the router clocks."
DEFVAL { fixed }
::= { snMspsIp6AddrProfileEntry 8 }
snMspsIp6AddrProfilePreferredLifeTimeFlag OBJECT-TYPE
SYNTAX INTEGER {
fixed (1),
variable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting this flag to fixed (1),the router
advertisement Preferred life time value is set
to fixed and by setting to variable(2), the
router advertisement preferred life time value
can decrease in real time. This flag will
synchronise the router clocks."
DEFVAL { fixed }
::= { snMspsIp6AddrProfileEntry 9 }
-- Path MTU for IPv6
snMspsIp6PmtuTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6PmtuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Path MTU table. This table contains
an entry for a specific path traversed by
packets exchanged between the source and
destination nodes."
::= { snMspsIp6Tables 6 }
snMspsIp6PmtuEntry OBJECT-TYPE
SYNTAX SnMspsIp6PmtuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Path MTU entry."
INDEX { snMspsIp6PmtuDest }
::= { snMspsIp6PmtuTable 1 }
SnMspsIp6PmtuEntry ::= SEQUENCE {
snMspsIp6PmtuDest OCTET STRING,
snMspsIp6Pmtu Integer32,
snMspsIp6PmtuTimeStamp Integer32,
snMspsIp6PmtuAdminStatus INTEGER
}
snMspsIp6PmtuDest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of the packets
to be exchanged."
::= { snMspsIp6PmtuEntry 1 }
snMspsIp6Pmtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the path MTU value for the path."
::= { snMspsIp6PmtuEntry 2 }
snMspsIp6PmtuTimeStamp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the entry created time in the PMTU table."
::= { snMspsIp6PmtuEntry 3 }
snMspsIp6PmtuAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired status of the PmtuTable. This variable
has to be made valid(1) for creating a entry in the PmtuTable.
If set to invalid(2), the entry is deleted."
::= { snMspsIp6PmtuEntry 4 }
-- IPv6 Address Translation table for LAN interfaces
-- The snMspsIp6NdLanCacheTable contain the Ipv6Address
-- to `physical' address equivalences for on-link nodes
-- on Ethernet.
-- Static entries can be created/deleted from SNMP. Dynamic
-- entries get created for neighbors upon IPv6 packet forwarding.
snMspsIp6NdLanCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6NdLanCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address Translation table used for
mapping from IPv6 addresses to physical addresses
on Ethernet."
::= { snMspsIp6Tables 7 }
snMspsIp6NdLanCacheEntry OBJECT-TYPE
SYNTAX SnMspsIp6NdLanCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one IPv6 address to `physical'
address equivalence. Entries are created dynamically upon
address resolution or statically from SNMP."
INDEX { snMspsIp6NdLanCacheIfIndex,
snMspsIp6NdLanCacheIPv6Addr }
::= { snMspsIp6NdLanCacheTable 1 }
SnMspsIp6NdLanCacheEntry ::=
SEQUENCE {
snMspsIp6NdLanCacheIfIndex
InterfaceIndex,
snMspsIp6NdLanCacheIPv6Addr
OCTET STRING,
snMspsIp6NdLanCacheStatus
INTEGER,
snMspsIp6NdLanCachePhysAddr
OCTET STRING,
snMspsIp6NdLanCacheState
INTEGER,
snMspsIp6NdLanCacheUseTime
TimeTicks
}
snMspsIp6NdLanCacheIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface on which this snMspsIp6NdLanCache entry exists.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of snMspsIp6IfIndex."
::= { snMspsIp6NdLanCacheEntry 1 }
snMspsIp6NdLanCacheIPv6Addr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address corresponding to the `physical' address
on Ethernet."
::= { snMspsIp6NdLanCacheEntry 2 }
snMspsIp6NdLanCacheStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to the value invalid(2)
effects in invalidating the corresponding entry
in the snMspsIp6NdLanCacheTable. Otherwise, the entry
remains valid."
DEFVAL { valid }
::= { snMspsIp6NdLanCacheEntry 3 }
snMspsIp6NdLanCachePhysAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The `physical' address on Ethernet."
::= { snMspsIp6NdLanCacheEntry 4 }
snMspsIp6NdLanCacheState OBJECT-TYPE
SYNTAX INTEGER {
static(1),
reachable(2),
incomplete(3),
stale(4),
delay(5),
probe(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reachability state of NdLanCacheEntry. Upon creation of
an entry from SNMP, this object takes the value as 'static'.
Otherwise takes the value that correspond to the states of
dynamically created entries."
::= { snMspsIp6NdLanCacheEntry 5 }
snMspsIp6NdLanCacheUseTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the entry was consulted
upon IPv6 packet forwarding."
::= { snMspsIp6NdLanCacheEntry 6 }
-- IPv6 Address Translation table for NBMA interfaces
-- The snMspsIp6NdWanCacheTable contain the Ipv6Address
-- to `physical' address equivalences for on-link nodes
-- on NBMA interfaces. The 'physical address' actually refers
-- to the IPv6 interface on which the Ipv6Address is on-link.
-- Static entries can be created/deleted from SNMP. Dynamic
-- entries get created for on-link nodes upon reception of
-- IPv6 packet.
snMspsIp6NdWanCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6NdWanCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address Translation table used for
mapping from IPv6 addresses to physical addresses
on NBMA interface. The 'physical address' actually refers
to the IPv6 interface on which the Ipv6Address is on-link."
::= { snMspsIp6Tables 8 }
snMspsIp6NdWanCacheEntry OBJECT-TYPE
SYNTAX SnMspsIp6NdWanCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one IPv6 address to `physical'
address equivalence. Entries are created dynamically upon
reception of IPv6 packet from an on-link source or statically
from SNMP."
INDEX { snMspsIp6NdWanCacheIfIndex,
snMspsIp6NdWanCacheIPv6Addr }
::= { snMspsIp6NdWanCacheTable 1 }
SnMspsIp6NdWanCacheEntry ::=
SEQUENCE {
snMspsIp6NdWanCacheIfIndex
InterfaceIndex,
snMspsIp6NdWanCacheIPv6Addr
OCTET STRING,
snMspsIp6NdWanCacheStatus
INTEGER,
snMspsIp6NdWanCacheState
INTEGER,
snMspsIp6NdWanCacheUseTime
TimeTicks
}
snMspsIp6NdWanCacheIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface on which this snMspsIp6NdWanCache entry exists.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of snMspsIp6IfIndex."
::= { snMspsIp6NdWanCacheEntry 1 }
snMspsIp6NdWanCacheIPv6Addr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address of the on-link node on this NBMA interface."
::= { snMspsIp6NdWanCacheEntry 2 }
snMspsIp6NdWanCacheStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to the value 'invalid(2)'
effects in invalidating the corresponding entry
in the snMspsIp6NdWanCacheTable. Otherwise, the entry
remains valid."
DEFVAL { valid }
::= { snMspsIp6NdWanCacheEntry 3 }
snMspsIp6NdWanCacheState OBJECT-TYPE
SYNTAX INTEGER {
static(1),
reachable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reachability state of NdWanCacheEntry.
Upon creation of an entry from SNMP, this object
takes the value as 'static'. Otherwise takes the
value as 'reachable' that corresponds to the state
of dynamically created entries."
::= { snMspsIp6NdWanCacheEntry 4 }
snMspsIp6NdWanCacheUseTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the entry
was consulted upon IPv6 packet forwarding."
::= { snMspsIp6NdWanCacheEntry 5 }
-- The IPv6 Ping table
-- This table is used to generate IPv6 Echo requests from this
-- entity to destinations.
-- Entries are created/deleted from SNMP.
snMspsIp6PingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6PingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IPv6 Ping Table."
::= { snMspsIp6Tables 12 }
snMspsIp6PingEntry OBJECT-TYPE
SYNTAX SnMspsIp6PingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the information about a particular IPv6 Ping
operation. An entry is created/deleted from SNMP."
INDEX { snMspsIp6PingIndex }
::= { snMspsIp6PingTable 1 }
SnMspsIp6PingEntry ::=
SEQUENCE {
snMspsIp6PingIndex
Integer32,
snMspsIp6PingDest
OCTET STRING,
snMspsIp6PingIfIndex
InterfaceIndex,
snMspsIp6PingAdminStatus
INTEGER,
snMspsIp6PingInterval
Integer32,
snMspsIp6PingRcvTimeout
Integer32,
snMspsIp6PingTries
Integer32,
snMspsIp6PingSize
Integer32,
snMspsIp6PingSentCount
Integer32,
snMspsIp6PingAverageTime
Integer32,
snMspsIp6PingMaxTime
Integer32,
snMspsIp6PingMinTime
Integer32,
snMspsIp6PingOperStatus
INTEGER,
snMspsIp6PingSuccesses
Counter32,
snMspsIp6PingPercentageLoss
Integer32,
snMspsIp6PingData
OCTET STRING,
snMspsIp6PingSrcAddr
OCTET STRING,
snMspsIp6PingZoneId
DisplayString,
snMspsIp6PingDestAddrType
INTEGER
}
snMspsIp6PingIndex OBJECT-TYPE
SYNTAX Integer32(0..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value identifying the particular IPv6 Ping entry."
::= { snMspsIp6PingEntry 1 }
snMspsIp6PingDest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 address of the destination to be pinged. This
should be a unicast or link-local address"
::= { snMspsIp6PingEntry 2 }
snMspsIp6PingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface on which this Ping is to be sent. The interface
identified by a particular value of this index is the same
interface as identified by the same value of snMspsIp6IfIndex.
The value of this object is needed when pinging to a
link-local destination, otherwise it is ignored."
::= { snMspsIp6PingEntry 3 }
snMspsIp6PingAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
invalid(3),
create(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired status for the ping operation. This variable
has to be made up(1) for starting the ping operation.
If set to down(2), the ping is stopped but the statistics
will still be available. The entry is created when this
variable is set to create(4) and deleted on setting this
variable to invalid(3)."
::= { snMspsIp6PingEntry 4 }
snMspsIp6PingInterval OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval in seconds between successive pings
sent to the destination."
DEFVAL { 1 }
::= { snMspsIp6PingEntry 5 }
snMspsIp6PingRcvTimeout OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds after which this entity times out
waiting for a particular ping response."
DEFVAL { 5 }
::= { snMspsIp6PingEntry 6 }
snMspsIp6PingTries OBJECT-TYPE
SYNTAX Integer32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times the destination is to be pinged."
DEFVAL { 5 }
::= { snMspsIp6PingEntry 7 }
snMspsIp6PingSize OBJECT-TYPE
SYNTAX Integer32 (32..2080)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the data portion of the Ping packet."
DEFVAL { 100 }
::= { snMspsIp6PingEntry 8 }
snMspsIp6PingSentCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets sent to destination."
::= { snMspsIp6PingEntry 9 }
snMspsIp6PingAverageTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of the round trip time in seconds to this
destination."
::= { snMspsIp6PingEntry 10 }
snMspsIp6PingMaxTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the round trip time in seconds to this
destination."
::= { snMspsIp6PingEntry 11 }
snMspsIp6PingMinTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of the round trip time in seconds to this
destination."
::= { snMspsIp6PingEntry 12 }
snMspsIp6PingOperStatus OBJECT-TYPE
SYNTAX INTEGER {
inprogress(1),
notinprogress(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of this ping operation."
::= { snMspsIp6PingEntry 13 }
snMspsIp6PingSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ping responses received."
::= { snMspsIp6PingEntry 14 }
snMspsIp6PingPercentageLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of lost packets for which no responses were
received till timeout."
::= { snMspsIp6PingEntry 15 }
snMspsIp6PingData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Data that should be sent in the Ping message"
::= { snMspsIp6PingEntry 16 }
snMspsIp6PingSrcAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source address to be used for the ping"
::= { snMspsIp6PingEntry 17 }
snMspsIp6PingZoneId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Zone-Id shoule be able to identify a particular zone
of the address's scope. This Zone id applies
to all kinds of unicast and multicast addresses of
non-global scope except the unspecified address.
The zone-id is not supported for global address."
REFERENCE "RFC4007"
::= { snMspsIp6PingEntry 18 }
snMspsIp6PingDestAddrType OBJECT-TYPE
SYNTAX INTEGER {
other (0),
anycast (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type of the destination to be pinged.
other - unicast or linklocal address
anycast - anycast address .An IPv6 packet cannot have anycast
address as source address. So snMspsIp6PingDestAddrType is used
to distinguish the anycast destination from other
types."
DEFVAL { 0 }
::= { snMspsIp6PingEntry 19 }
-- Supoort for Proxy ND - START
--snMspsIp6NDProxyTable BEGIN
snMspsIp6NDProxyListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6NDProxyListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configurable list of IPv6 Addresses for which
Proxy Neighbor Discovery is desired."
::= { snMspsIp6Tables 13 }
snMspsIp6NDProxyListEntry OBJECT-TYPE
SYNTAX SnMspsIp6NDProxyListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ND Proxy Table. Each
entry specifies the IPv6 address for
which proxy feature is needed, and
the adminstatus for the row."
INDEX { snMspsIp6NdProxyAddr }
::= { snMspsIp6NDProxyListTable 1 }
SnMspsIp6NDProxyListEntry ::= SEQUENCE {
snMspsIp6NdProxyAddr
OCTET STRING,
snMspsIp6NdProxyAdminStatus
INTEGER
}
snMspsIp6NdProxyAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 address for Proxy ND."
::= { snMspsIp6NDProxyListEntry 1 }
snMspsIp6NdProxyAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
create (1),
invalid (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the ND Proxy list entry.
When set to create(4) the IPv6 interface is
created and invalid(4) to delete the interface."
::= { snMspsIp6NDProxyListEntry 2 }
-- Supprot for Proxy ND - END
-- Support for Address Selection Policy Table -START
-- snMspsIp6AddrSelPolicyTable BEGIN
snMspsIp6AddrSelPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6AddrSelPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for default address selection in IPv6. This table is used to configure the Precedence
and Label associated with a source/destination address. The Address Selection Policy Table
contains the following default entries -
Prefix Precedence Label
::1/128 50 0
::/0 40 1
2002::/16 30 2
::/96 20 3
::ffff:0:0/96 10 4
A lookup of this table aids in selection of best source/destination address from amongst a candidate list.
"
::= { snMspsIp6Tables 14 }
snMspsIp6AddrSelPolicyEntry OBJECT-TYPE
SYNTAX SnMspsIp6AddrSelPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table entry is used to configure the following parameters for an IPv6 source/destination address -
Prefix, PrefixLen,Ifindex,Preference,Label,Address Type,IsSelfAddress, IsAddressPublic,
IsAddressDeprecated, ReachabilityStatus, ConfigStatus and Rowstatus"
INDEX {
snMspsIp6AddrSelPolicyPrefix,
snMspsIp6AddrSelPolicyPrefixLen,
snMspsIp6AddrSelPolicyIfIndex
}
::= { snMspsIp6AddrSelPolicyTable 1 }
SnMspsIp6AddrSelPolicyEntry ::= SEQUENCE {
snMspsIp6AddrSelPolicyPrefix
OCTET STRING,
snMspsIp6AddrSelPolicyPrefixLen
Integer32,
snMspsIp6AddrSelPolicyIfIndex
InterfaceIndex,
snMspsIp6AddrSelPolicyScope
Integer32,
snMspsIp6AddrSelPolicyPrecedence
Integer32,
snMspsIp6AddrSelPolicyLabel
Integer32,
snMspsIp6AddrSelPolicyAddrType
INTEGER,
snMspsIp6AddrSelPolicyIsPublicAddr
INTEGER,
snMspsIp6AddrSelPolicyIsSelfAddr
INTEGER,
snMspsIp6AddrSelPolicyReachabilityStatus
INTEGER,
snMspsIp6AddrSelPolicyConfigStatus
INTEGER,
snMspsIp6AddrSelPolicyRowStatus
RowStatus
}
snMspsIp6AddrSelPolicyPrefix OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address/Prefix for which the policy needs to be configured."
::= { snMspsIp6AddrSelPolicyEntry 1 }
snMspsIp6AddrSelPolicyPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Prefix length associated with the IPV6 address identified by 'snMspsIp6AddrSelPolicyPrefix."
::= { snMspsIp6AddrSelPolicyEntry 2 }
snMspsIp6AddrSelPolicyIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value that uniquely identifies the interface to
which this entry is applicable. A value of 0 indicates that the associated address is reachable
via any interface."
::= { snMspsIp6AddrSelPolicyEntry 3 }
snMspsIp6AddrSelPolicyScope OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This MIB object identifies the scope of the IPv6 address. This can take the following values based on
whether the address is unicast/anycast or multicast.
0 reserved
1 Interface-Local scope
2 Link-Local scope
3 reserved
4 Admin-Local scope
5 Site-Local scope
6 (unassigned)
7 (unassigned)
8 Organization-Local scope
9 (unassigned)
10 (unassigned)
11 (unassigned)
12 (unassigned)
13 (unassigned)
14 Global scope
15 reserved
Link-local and global scopes are applicable for unicast/anycast addresses.
The following are valid multicast scopes -
Interface-Local scope spans only a single interface on a node
and is useful only for loopback transmission of multicast.
Link-Local is used for uniquely identifying interfaces within a single link.
Admin-Local scope is the smallest scope that must be
administratively configured, i.e., not automatically derived
from physical connectivity or other, non-multicast-related
configuration.
Site-Local scope is intended to span a single site.
Organization-Local scope is intended to span multiple sites
belonging to a single organization.
Global scope is used for uniquely identifying interfaces anywhere in the Internet
scopes labeled (unassigned) are available for administrators
to define additional multicast regions."
::= { snMspsIp6AddrSelPolicyEntry 4 }
snMspsIp6AddrSelPolicyPrecedence OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The precedence value associated with the address in the policy table. This value is applicable for
destination addresses.Higher the value, higher the precedence."
DEFVAL { 30 }
::= { snMspsIp6AddrSelPolicyEntry 5 }
snMspsIp6AddrSelPolicyLabel OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The label value associated with the address in the policy table."
DEFVAL { 2 }
::= { snMspsIp6AddrSelPolicyEntry 6}
snMspsIp6AddrSelPolicyAddrType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
multicast(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to configure an address as unicast/anycast/multicast, provided the
IPv6 address meets the validation criteria for the address type."
::= { snMspsIp6AddrSelPolicyEntry 7 }
snMspsIp6AddrSelPolicyIsPublicAddr OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This MIB object indicates whether the address configured in the policy table is a private or public
address."
::= { snMspsIp6AddrSelPolicyEntry 8 }
snMspsIp6AddrSelPolicyIsSelfAddr OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates whether the given address is configured on the associated interface
and represents a self-address. The associated MIB object snMspsIp6AddrSelPolicyIfIndex takes value true
if the associated IPv6 address is a self-node address.."
::= { snMspsIp6AddrSelPolicyEntry 9 }
snMspsIp6AddrSelPolicyReachabilityStatus OBJECT-TYPE
SYNTAX INTEGER {
reachable (1),
unreachable (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates whether the address configured in the Policy Table is reachable/unreachable
"
::= { snMspsIp6AddrSelPolicyEntry 10 }
snMspsIp6AddrSelPolicyConfigStatus OBJECT-TYPE
SYNTAX INTEGER {
automatic (1),
management (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates whether the associated entry in the Policy table is created automatically or
via the administrator."
::= { snMspsIp6AddrSelPolicyEntry 11 }
snMspsIp6AddrSelPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative Status of the policy table. This object is used
to create or delete the entry in the policy table. The following values
are not supported for this MIB object - CREATE_AND_GO."
::= { snMspsIp6AddrSelPolicyEntry 12 }
-- snMspsIp6AddrSelPolicyTable END
-- Support for Scope Zone Interface Map Table - START
--snMspsIp6IfScopeZoneMapTable BEGIN
snMspsIp6IfScopeZoneMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6IfScopeZoneMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A zone index identifies an instance of a specific scope uniquely
within the system.The zone index is used to associate unambiguously
an IPv6 address to a specific zone.
Following are the changes that has been done in snMspsIp6IfScopeZoneMapTable
1) The Zone-Index which is of type InetZoneIndex in stdipvx.mib
is changed to DisplayString for user convenience.As the user is
aware of the zones by the scope-zone name rather than the index
(i.e Linklocal1 or sitelocal1,scope61,scope71) it has been changed
to DisplayString. But the index associated with the scope-zone is
displayed by ipv6ScopeZoneIndexTable.
2) The InetZoneIndex definition in INET-ADDRESS-MIB says that the zone-index
will typically be the interface index for link-local address, but as per
the Siemens design the Zone-Index is taken as a free flowing number starting
from the value 1, hence the value of ipv6ScopeZoneIndexLinkLocal shall not be complaint with InetZoneIndex definition.
3) It is also mentioned that the zone-index value of 0 refers to the default
zone. But the Siemens design implements the default scope-zone index for every scope by the snMspsIp6ScopeMemberEntry mib table. Hence the default-zone index
of value 0 is also not supported
4) The scope-zone index that are not configured on an interface shall take a
alpha numeric value of invalid in SnMspsIp6IfScopeZoneMapEntry and -1 for the
index value in ipv6ScopeZoneIndexTable. "
REFERENCE "Section 2.7 of RFC 4291"
::= { snMspsIp6Tables 15 }
snMspsIp6IfScopeZoneMapEntry OBJECT-TYPE
SYNTAX SnMspsIp6IfScopeZoneMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the list of scope identifiers on a given
interface. Its a unique value assigned for each scope on an
interface."
INDEX { snMspsIp6ScopeZoneIndexIfIndex }
::= { snMspsIp6IfScopeZoneMapTable 1 }
SnMspsIp6IfScopeZoneMapEntry ::= SEQUENCE {
snMspsIp6ScopeZoneIndexIfIndex InterfaceIndex,
snMspsIp6ScopeZoneIndexInterfaceLocal DisplayString,
snMspsIp6ScopeZoneIndexLinkLocal DisplayString,
snMspsIp6ScopeZoneIndex3 DisplayString,
snMspsIp6ScopeZoneIndexAdminLocal DisplayString,
snMspsIp6ScopeZoneIndexSiteLocal DisplayString,
snMspsIp6ScopeZoneIndex6 DisplayString,
snMspsIp6ScopeZoneIndex7 DisplayString,
snMspsIp6ScopeZoneIndexOrganizationLocal DisplayString,
snMspsIp6ScopeZoneIndex9 DisplayString,
snMspsIp6ScopeZoneIndexA DisplayString,
snMspsIp6ScopeZoneIndexB DisplayString,
snMspsIp6ScopeZoneIndexC DisplayString,
snMspsIp6ScopeZoneIndexD DisplayString,
snMspsIp6ScopeZoneIndexE DisplayString,
snMspsIp6IfScopeZoneCreationStatus INTEGER,
snMspsIp6IfScopeZoneRowStatus RowStatus
}
snMspsIp6ScopeZoneIndexIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value that uniquely identifies the interface to
which these scopes belong. The interface identified by a
particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex."
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 1 }
snMspsIp6ScopeZoneIndexInterfaceLocal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for the Interface local scope on this interface."
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 2 }
snMspsIp6ScopeZoneIndexLinkLocal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for the link-local scope on this interface.
The index value corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexLinkLocal"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 3 }
snMspsIp6ScopeZoneIndex3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope 3 on this interface. The index value corresponding
to this scope-zone can be known from ipv6ScopeZoneIndex3"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 4 }
snMspsIp6ScopeZoneIndexAdminLocal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for the admin-local scope on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndexAdminLocal"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 5 }
snMspsIp6ScopeZoneIndexSiteLocal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for the site-local scope on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndexSiteLocal "
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 6 }
snMspsIp6ScopeZoneIndex6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope 6 on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndex6 "
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 7 }
snMspsIp6ScopeZoneIndex7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope 7 on this interface.The index value
corresponding to this scope-zone can be known from ipv6ScopeZoneIndex7"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 8 }
snMspsIp6ScopeZoneIndexOrganizationLocal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for the organization-local scope on this
interface.The index value corresponding to this scope-zone
can be known from ipv6ScopeZoneIndexOrganizationLocal"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 9 }
snMspsIp6ScopeZoneIndex9 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope 9 on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndex9"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 10 }
snMspsIp6ScopeZoneIndexA OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope A on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexA"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 11 }
snMspsIp6ScopeZoneIndexB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope B on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexB"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 12 }
snMspsIp6ScopeZoneIndexC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope C on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexC"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 13 }
snMspsIp6ScopeZoneIndexD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope D on this interface.The index value
corresponding to this scope-zone can be known from
ipv6ScopeZoneIndexD"
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 14 }
snMspsIp6ScopeZoneIndexE OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The zone index for scope E on this interface."
DEFVAL { "Invalid" }
::= { snMspsIp6IfScopeZoneMapEntry 15 }
snMspsIp6IfScopeZoneCreationStatus OBJECT-TYPE
SYNTAX INTEGER {
notcreated(0),
automatic(1),
mgmt(2),
overridden(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flag to determine if the scope-zone index is configured automatically
or by configuration.When an IPv6 interface is created by default the
linklocal scope is created and the creation status of it is automatic.When
a user creates a scope-zone the creation status is updated as manual.When
an indication is receievd from higher layer protocol regarding the detection
of interfaces on the same link, in that case whatever might be the configuration
status (i.e automatic or manual) is changed to overridden. It means if the
scope-zone on the standby links if its automatic or manually created both will
be over-ridden and configured with the scope-zone of the active link"
DEFVAL { notcreated }
::= { snMspsIp6IfScopeZoneMapEntry 16 }
snMspsIp6IfScopeZoneRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The rowstatus of the scope-zone index table, used in
accordance to creation and deletion of scope-zones.To create
a row in this table manager sets this object to createAndGo(4).
The rowentry can be deleted automatically only when the creation
status is set to auto,else the rowstatus is set to NotInService. "
::= { snMspsIp6IfScopeZoneMapEntry 17 }
-- Support for Scope-Zone - END
-- Support for Scope-Zone Table - START
--snMspsIp6ScopeZoneTable BEGIN
snMspsIp6ScopeZoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6ScopeZoneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The table is used to map each scope-zone index
with the interface to which it has been associated.
This table is indeed used while forwarding packets
to find out what all interfaces belong to a particular
scope-zone"
::= { snMspsIp6Tables 16 }
snMspsIp6ScopeZoneEntry OBJECT-TYPE
SYNTAX SnMspsIp6ScopeZoneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Scope-Zone Index Member Table.Each
entry specifies the interface indices associated with
a particular scope-zone index "
INDEX { snMspsIp6ScopeZoneName }
::= { snMspsIp6ScopeZoneTable 1 }
SnMspsIp6ScopeZoneEntry ::= SEQUENCE {
snMspsIp6ScopeZoneName DisplayString,
snMspsIp6ScopeZoneIndex InetZoneIndex,
snMspsIp6ScopeZoneCreationStatus INTEGER,
snMspsIp6ScopeZoneInterfaceList InterfaceList,
snMspsIp6IsDefaultScopeZone INTEGER
}
snMspsIp6ScopeZoneName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Displays the scope zone name value(i.e linklocal1,
interfacelocal2) for the scope-zone index"
::= { snMspsIp6ScopeZoneEntry 1 }
snMspsIp6ScopeZoneIndex OBJECT-TYPE
SYNTAX InetZoneIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each scope
on an interface. It is recommended that values are
assigned contiguously starting from 1. "
::= { snMspsIp6ScopeZoneEntry 2 }
snMspsIp6ScopeZoneCreationStatus OBJECT-TYPE
SYNTAX INTEGER {
automatic(1),
mgmt(2),
overridden(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flag to determine if the scope-zone index is configured automatically
or by configuration.When an IPv6 interface is created by default the
linklocal scope is created and the creation status of it is automatic.When
a user creates a scope-zone the creation status is updated as manual.When
an indication is receievd from higher layer protocol regarding the detection
of interfaces on the same link, in that case whatever might be the configuration
status (i.e automatic or manual) is changed to overridden. It means if the
scope-zone on the standby links is overridden by the scope-zone of the active
link regardless Of whether the associated zone is created manually/automatically"
::= { snMspsIp6ScopeZoneEntry 3 }
snMspsIp6ScopeZoneInterfaceList OBJECT-TYPE
SYNTAX InterfaceList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This MIB object displays all the interfaces that are part of/members of this
scope-zone index. These interfaces have the corresponding bit set in the octetlist. "
::= { snMspsIp6ScopeZoneEntry 4 }
snMspsIp6IsDefaultScopeZone OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" yes- indicates that zone is default zone for the associated scope
No - indicates that zone is not the default zone for the associated scope"
DEFVAL { no }
::= { snMspsIp6ScopeZoneEntry 5 }
--snMspsIp6ScopeZoneTable END
-- snMspsIp6Tables END
-- IPv6 ICMP statistics
snMspsIp6IcmpInMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages which
the entity received. Note that this counter
includes all those counted by snMspsIp6IcmpInErrors."
::= { snMspsIp6Icmp 1 }
snMspsIp6IcmpInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP messages which the entity
received but determined as having ICMP-specific
errors (bad ICMP checksums, bad length, etc.)."
::= { snMspsIp6Icmp 2 }
snMspsIp6IcmpInDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Destination Unreachable
messages received."
::= { snMspsIp6Icmp 3 }
snMspsIp6IcmpInTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Time Exceeded messages
received."
::= { snMspsIp6Icmp 4 }
snMspsIp6IcmpInParmProbs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Parameter Problem messages
received."
::= { snMspsIp6Icmp 5 }
snMspsIp6IcmpInPktTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Packet Too Big messages
received."
::= { snMspsIp6Icmp 6 }
snMspsIp6IcmpInEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo (request) messages
received."
::= { snMspsIp6Icmp 7 }
snMspsIp6IcmpInEchoReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo Reply messages received."
::= { snMspsIp6Icmp 8 }
snMspsIp6IcmpInRouterSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Solicit messages
received."
::= { snMspsIp6Icmp 9 }
snMspsIp6IcmpInRouterAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Advertisement messages
received."
::= { snMspsIp6Icmp 10 }
snMspsIp6IcmpInNeighborSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Solicit messages
received."
::= { snMspsIp6Icmp 11 }
snMspsIp6IcmpInNeighborAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement
messages received."
::= { snMspsIp6Icmp 12 }
snMspsIp6IcmpInRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Redirect messages received."
::= { snMspsIp6Icmp 13 }
snMspsIp6IcmpInAdminProhib OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ICMP destination unreachable/communication
administratively prohibited messages received."
::= { snMspsIp6Icmp 14 }
snMspsIp6IcmpOutMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages which this
entity attempted to send. Note that this counter
includes all those counted by icmpOutErrors."
::= { snMspsIp6Icmp 15 }
snMspsIp6IcmpOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP messages which this entity did
not send due to problems discovered within ICMP
such as a lack of buffers. This value should not
include errors discovered outside the ICMP layer
such as the inability of IPv6 to route the resultant
datagram. In some implementations there may be no
types of error which contribute to this counter's
value."
::= { snMspsIp6Icmp 16 }
snMspsIp6IcmpOutDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Destination Unreachable
messages sent."
::= { snMspsIp6Icmp 17 }
snMspsIp6IcmpOutTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Time Exceeded messages sent."
::= { snMspsIp6Icmp 18 }
snMspsIp6IcmpOutParmProbs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Parameter Problem messages
sent."
::= { snMspsIp6Icmp 19 }
snMspsIp6IcmpOutPktTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Packet Too Big messages sent."
::= { snMspsIp6Icmp 20 }
snMspsIp6IcmpOutEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo (request) messages sent."
::= { snMspsIp6Icmp 21 }
snMspsIp6IcmpOutEchoReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo Reply messages sent."
::= { snMspsIp6Icmp 22 }
snMspsIp6IcmpOutRouterSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Solicitation messages
sent."
::= { snMspsIp6Icmp 23 }
snMspsIp6IcmpOutRouterAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Router Advertisement messages
received."
::= { snMspsIp6Icmp 24 }
snMspsIp6IcmpOutNeighborSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Solicitation
messages sent."
::= { snMspsIp6Icmp 25 }
snMspsIp6IcmpOutNeighborAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement
messages
received."
::= { snMspsIp6Icmp 26 }
snMspsIp6IcmpOutRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Redirect messages sent. For
a host, this object will always be zero,
since hosts do not send redirects."
::= { snMspsIp6Icmp 27 }
snMspsIp6IcmpOutAdminProhib OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ICMP destination unreachable/
communication administratively prohibited
messages sent."
::= { snMspsIp6Icmp 28 }
snMspsIp6IcmpInBadCode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received ICMP messages having unrecognized type of
message "
::= { snMspsIp6Icmp 29 }
snMspsIp6IcmpInNARouterFlagSet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement received with Router
Flag Set"
::= { snMspsIp6Icmp 30 }
snMspsIp6IcmpInNASolicitedFlagSet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement received with Solicited
Flag Set"
::= { snMspsIp6Icmp 31 }
snMspsIp6IcmpInNAOverrideFlagSet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement received with Override
Flag Set"
::= { snMspsIp6Icmp 32 }
snMspsIp6IcmpOutNARouterFlagSet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement sent with Router
Flag Set"
::= { snMspsIp6Icmp 33 }
snMspsIp6IcmpOutNASolicitedFlagSet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement sent with Solicited
Flag Set"
::= { snMspsIp6Icmp 34 }
snMspsIp6IcmpOutNAOverrideFlagSet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Neighbor Advertisement sent with Override
Flag Set"
::= { snMspsIp6Icmp 35 }
-- The IPv6 UDP group
snMspsIp6UdpScalars OBJECT IDENTIFIER ::= { snMspsIp6Udp 1 }
--snMspsIp6UdpScalars BEGIN
snMspsIp6UdpInDatagrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UDP datagrams delivered to
UDP users."
::= { snMspsIp6UdpScalars 1 }
snMspsIp6UdpNoPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received UDP datagrams
for which there was no application at
the destination port."
::= { snMspsIp6UdpScalars 2 }
snMspsIp6UdpInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received UDP datagrams that
could not be delivered for reasons other
than the lack of an application at
the destination port."
::= { snMspsIp6UdpScalars 3 }
snMspsIp6UdpOutDatagrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UDP datagrams sent
from this entity."
::= { snMspsIp6UdpScalars 4 }
-- snMspsIp6UdpScalars END
-- IPv6 Routing Table
-- The IPv6 routing table contains an entry for each
-- valid IPv6 unicast routes that can be used for packet
-- forwarding. There are no entries for Multicast and Link-Local
-- addresses.
-- This table contains static and dynamic routes as well as routes
-- to directly connected networks which are derived from the
-- configured address prefixes. Thus entries exist in this table
-- even if RIPng protocol is not running.
-- Entries created/deleted from SNMP, dynamically through RIPng
-- protocol or derived from configured address prefixes.
snMspsIp6RouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains dynamic routes that are learnt
through dynamic routing protocol as well as local routes
derived from configured address prefixes and statically
configured routes."
::= { snMspsIp6Route 1 }
snMspsIp6RouteEntry OBJECT-TYPE
SYNTAX SnMspsIp6RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IPv6 Routing Table. An entry can be created
by means of the routing protocol, derived from configured
address prefixes as well as statically configured. There
can be a static route as well as dynamic routes with the
same destination and prefix length."
INDEX { snMspsIp6RouteDest,
snMspsIp6RoutePfxLength,
snMspsIp6RouteProtocol,
snMspsIp6RouteNextHop
}
::= { snMspsIp6RouteTable 1 }
SnMspsIp6RouteEntry ::=
SEQUENCE {
snMspsIp6RouteDest
OCTET STRING,
snMspsIp6RoutePfxLength
Integer32,
snMspsIp6RouteProtocol
INTEGER,
snMspsIp6RouteNextHop
OCTET STRING,
snMspsIp6RouteIfIndex
InterfaceIndex,
snMspsIp6RouteMetric
Unsigned32,
snMspsIp6RouteType
INTEGER,
snMspsIp6RouteTag
Unsigned32,
snMspsIp6RouteAge
Integer32,
snMspsIp6RouteAdminStatus
RowStatus,
snMspsIp6RouteAddrType
INTEGER
}
snMspsIp6RouteDest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this route.
This object will not take a Link-Local or Multicast address
value."
::= { snMspsIp6RouteEntry 1 }
snMspsIp6RoutePfxLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { snMspsIp6RouteEntry 2 }
snMspsIp6RouteProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
local(2), -- non-protocol information,
-- e.g., manually configured
-- entries
netmgmt(3), -- static route
ndisc(4), -- e.g., Redirect
-- the following are all
-- dynamic routing protocols
rip(5), -- RIPng
ospf(6), -- Open Shortest Path First
bgp(7), -- Border Gateway Protocol
idrp(8), -- InterDomain Routing Protocol
igrp(9) -- InterGateway Routing Protocol
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing mechanism via which this route was
learned. If it has value local(2), it indicates this
route was derived from a configured address prefix."
::= { snMspsIp6RouteEntry 3 }
snMspsIp6RouteNextHop OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Next hop IPv6 Address for this route. For direct routes
it has the value ::0."
::= { snMspsIp6RouteEntry 4 }
snMspsIp6RouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index value which uniquely identifies the interface
through which the next hop of this route should be reached.
The interface identified by a particular value of this index
is the same interface as identified by the same value of
snMspsIp6IfIndex."
::= { snMspsIp6RouteEntry 5 }
snMspsIp6RouteMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The routing metric associated with this route."
DEFVAL { 1 }
::= { snMspsIp6RouteEntry 6 }
snMspsIp6RouteType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
-- an route indicating that
-- packets to destinations
-- matching this route are
discard(2), -- to be discarded
-- route to directly
local(3), -- connected (sub-)network
-- route to a remote
remote(4) -- destination
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of route. Note that 'local(3)' refers
to a route for which the next hop is the final
destination; 'remote(4)' refers to a route for
which the next hop is not the final
destination; 'discard(2)' refers to a route
indicating that packets to destinations matching
this route are to be discarded (sometimes called
black-hole route). In this implementation
discard(2) is not supported."
::= { snMspsIp6RouteEntry 7 }
snMspsIp6RouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this route is an internal
or external route. Value 0 represent routes are internal
to the routing domain and Value > 0 represent routes
are external to the routing domain. For routes learnt
through dynamic routing protocol, this object derives its
value from the packet. For routes which are statically
configured, this object should be configured. The higher
order 2 bytes refers to the tag value and the lower order
2 byter refers to the next-hop AS number. "
::= { snMspsIp6RouteEntry 8 }
snMspsIp6RouteAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last
updated or otherwise determined to be correct. For
statically configured routes and locally derived routes,
this object has value 0."
::= { snMspsIp6RouteEntry 9 }
snMspsIp6RouteAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative Status of the route. This object is used
to create or delete the route entry. The snMspsIp6RouteIfIndex
needs to be set, before the route entry is made active.
CreateAndGo is not supported."
::= { snMspsIp6RouteEntry 10 }
snMspsIp6RouteAddrType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the destination address in the route entry
is unicast or anycast."
DEFVAL { 1 }
::= { snMspsIp6RouteEntry 11 }
--ipv6RouteTable END
-- snMspsIp6PrefTable BEGIN
-- IPv6 Protocol Preference
-- The IPv6 Protocol Preference table defines the preference value
-- for each protocol and the best routes will be determined based
-- on this preference value. Protocol with lower value is the
-- preferred.
snMspsIp6PrefTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsIp6PrefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Preference table contains information on the
Preference Value for each supported protocol."
::= { snMspsIp6Route 2 }
snMspsIp6PrefEntry OBJECT-TYPE
SYNTAX SnMspsIp6PrefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects about a particular protocols
preference value."
INDEX { snMspsIp6Protocol }
::= { snMspsIp6PrefTable 1 }
SnMspsIp6PrefEntry ::= SEQUENCE {
snMspsIp6Protocol
INTEGER,
snMspsIp6Preference
Unsigned32
}
snMspsIp6Protocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
netmgmt(3),
ndisc(4),
rip(5),
ospf(6),
bgp(7),
idrp(8),
igrp(9)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value identifying the protocol whose preference
value needs to be processed."
::= { snMspsIp6PrefEntry 1 }
snMspsIp6Preference OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preference of the route learned by a particular protocol.
This value is used while choosing the best path.
Lesser the value, highest is the preference. "
::= { snMspsIp6PrefEntry 2 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
PortLaMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines how a Port Channel does channeling.
lacp(1) - place the port into passive
negotiation state, in which the
port waits for its peer to
initiate negotiation.
manual(2) - force the port to enable
channeling.
disable(3) - channeling is disabled."
SYNTAX INTEGER {
lacp(1),
manual(2),
disable(3)
}
LacpKey ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The Actor or Partner Key value."
SYNTAX Integer32 (0..65535)
LacpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Actor and Partner State values from the LACPDU."
SYNTAX BITS {
lacpActivity(0),
lacpTimeout(1),
aggregation(2),
synchronization(3),
collecting(4),
distributing(5),
defaulted(6),
expired(7)
}
-- ------------------------------------------------------------------
-- The La System Group
-- ------------------------------------------------------------------
-- snMspsLa 1-3 reserverd
snMspsLaStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Link Aggregation Module administrative status as
enabled or disabled. The module can be enabled only when this
object is set to 'enabled'."
::= { snMspsLa 4 }
snMspsLaActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 6-octet read-write MAC address value used as a unique
identifier for the System."
::= { snMspsLa 5 }
snMspsLaMaxPortChannels OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Object specifies the maximum number of
Port-channels Present in the system"
::= { snMspsLa 6 }
-- snMspsLa 7-9 reserved
-- ------------------------------------------------------------------
-- Port Channel Table
-- ------------------------------------------------------------------
snMspsLaPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { snMspsLa 10 }
snMspsLaPortChannelEntry OBJECT-TYPE
SYNTAX SnMspsLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port"
INDEX { snMspsLaPortChannelIfIndex }
::= { snMspsLaPortChannelTable 1 }
SnMspsLaPortChannelEntry ::= SEQUENCE {
snMspsLaPortChannelIfIndex InterfaceIndex,
snMspsLaPortChannelGroup LacpKey,
snMspsLaPortChannelAdminMacAddress MacAddress,
snMspsLaPortChannelMacSelection INTEGER,
snMspsLaPortChannelMode PortLaMode,
snMspsLaPortChannelPortCount Integer32,
snMspsLaPortChannelActivePortCount Integer32,
snMspsLaPortChannelSelectionPolicy INTEGER,
snMspsLaPortChannelDefaultPortIndex InterfaceIndexOrZero,
snMspsLaPortChannelMaxPorts Integer32,
snMspsLaPortChannelPortList PortList,
snMspsLaPortChannelName DisplayString
}
snMspsLaPortChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's
interface index). "
::= { snMspsLaPortChannelEntry 1 }
snMspsLaPortChannelGroup OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in this table. "
::= { snMspsLaPortChannelEntry 2 }
snMspsLaPortChannelAdminMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for configuring MacAddress that is
to be used by the port-channel when snMspsLaPortChannelMacSelection
is force.
WARNING:The value configured should not conflict
with the MAC address of system ports that are not configured
to select this port-channel."
::= { snMspsLaPortChannelEntry 3 }
snMspsLaPortChannelMacSelection OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), force(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MAC address selection method for
for the port-channel.
Dynamic - System will reserve certain MAC address
for aggregators. These MAC address are
derived from BaseMac. If this object is
configured as dynamic, the system will
allocate MAC address from this pool.
Force - Port-channel MAC address configured through
snMspsLaPortChannelAdminMacAddress is used.
The value can be changed to Force only after configuring
a valid MAC address in snMspsLaPortChannelAdminMacAddress."
DEFVAL { 1 }
::= { snMspsLaPortChannelEntry 4 }
snMspsLaPortChannelMode OBJECT-TYPE
SYNTAX PortLaMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Operating Channel Mode of the port
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled."
::= { snMspsLaPortChannelEntry 5 }
snMspsLaPortChannelPortCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports actually configured to the port-channel"
::= { snMspsLaPortChannelEntry 6 }
snMspsLaPortChannelActivePortCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will give the number of ports that are attached to the
port-channel and actively carrying data traffic on the link."
::= { snMspsLaPortChannelEntry 7 }
snMspsLaPortChannelSelectionPolicy OBJECT-TYPE
SYNTAX INTEGER {
macSrc(1),
macDst(2),
macSrcDst(3),
ipSrc(4),
ipDst(5),
ipSrcDst(6),
vlanId(7),
isid(8),
macSrcVid(9),
macDstVid(10),
macSrcDstVid(11),
mplsVcLabel(12),
mplsTunnelLabel(13),
mplsVcTunnelLabel(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Link selection policy to be used by the port-channel.
Selection policy isid implies selection based on Service-instance
and is applicable only in Provider BackBone bridge."
DEFVAL {macSrcDst}
::= {snMspsLaPortChannelEntry 8}
snMspsLaPortChannelDefaultPortIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ifIndex of the default port that gets attached to the
aggregator. A value of 0 means there is no default port for
this port-channel.
If this object is set to 0, it will remove the current default
port from the aggregator.
To change the default port of an aggregator, first reset the
object to 0 and then set the new ifIndex as default port."
DEFVAL { 0 }
::= { snMspsLaPortChannelEntry 9 }
snMspsLaPortChannelMaxPorts OBJECT-TYPE
SYNTAX Integer32 (2..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximun number of
ports that can attach to a port-channel."
DEFVAL { 8 }
::= { snMspsLaPortChannelEntry 10 }
snMspsLaPortChannelPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation"
::= { snMspsLaPortChannelEntry 11 }
snMspsLaPortChannelName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of the aggregation."
::= { snMspsLaPortChannelEntry 12 }
-----------------------------------------------------------
-- LA Port Table objects Extension Table
-- ------------------------------------------------------------------
snMspsXLaPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsXLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This augment table contains additional objects
for snMspsLaPortChannelTable."
::= { snMspsLa 11 }
snMspsXLaPortChannelEntry OBJECT-TYPE
SYNTAX SnMspsXLaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains management information applicable to
an interface."
AUGMENTS { snMspsLaPortChannelEntry }
::= { snMspsXLaPortChannelTable 1 }
SnMspsXLaPortChannelEntry ::=
SEQUENCE {
snMspsXLaPortChannelRowStatus
RowStatus
}
snMspsXLaPortChannelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Row status of this entry which
is used only in two scenarios.
1. CREATE_AND_WAIT
2. DESTROY.
Where '1' will be used during port creation
and '2' will be used during port deletion."
::= { snMspsXLaPortChannelEntry 1 }
-- -------------------------------------------------------------
-- The Aggregation Port Group
-- -------------------------------------------------------------
snMspsLaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains objects to set the port lacp mode
of dot3adAggPortTable."
::={snMspsLa 12 }
snMspsLaPortEntry OBJECT-TYPE
SYNTAX SnMspsLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is for each physical port that participates
in Link Aggregation which can be either aggregatable or individual.
This table is indexed by the PortIndex."
INDEX {snMspsLaPortIndex }
::={snMspsLaPortTable 1 }
SnMspsLaPortEntry ::=
SEQUENCE {
snMspsLaPortIndex InterfaceIndex,
snMspsLaPortMode PortLaMode,
snMspsLaPortBundleState INTEGER,
snMspsLaPortActorResetAdminState LacpState,
snMspsLaPortAggregateWaitTime TimeTicks,
snMspsLaPortPartnerResetAdminState LacpState,
snMspsLaPortActorAdminPort Integer32,
snMspsLaPortRestoreMtu Integer32,
snMspsLaPortSelectAggregator INTEGER,
snMspsLagConfigPortLACPLMEnable INTEGER
}
snMspsLaPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port"
::={snMspsLaPortEntry 1 }
snMspsLaPortMode OBJECT-TYPE
SYNTAX PortLaMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable LACP , disable LACP or manually
aggregate a port"
::={snMspsLaPortEntry 2 }
snMspsLaPortBundleState OBJECT-TYPE
SYNTAX INTEGER {
upInBndl(0),
standby(1),
down(2),
upIndividual(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only object is used to display the port state in aggregation
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable of joining in
aggregation group, when any of the ports in
aggregation group goes down.
down(2) - The port is operationally down in lower layers.
or the port is operational in lower layers
but temporarily not able to participate
in aggregation because of different partner
information in the same group.
upIndividual(3) - The port is operating individually and
is not taking part in aggregation."
::={snMspsLaPortEntry 3}
snMspsLaPortActorResetAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of 8 bits,corresponding to the administrative values
of Actor_State as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout),the third bit
corresponds to bit 2 (Aggregation),the fourth bit corresponds to
bit 3 (Synchronization),the fifth bit corresponds to bit 4
(Collecting),the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
bit corresponds to bit 7 (Expired).
This object allows the RESET of the values of Actor LACP_Activity,
LACP_Timeout and Aggregation.
Get operation on this object returns the current Port State of
the Actor"
::={snMspsLaPortEntry 4 }
snMspsLaPortAggregateWaitTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duration of the port to attach to the PortChannel."
DEFVAL { 2 }
::={snMspsLaPortEntry 5 }
snMspsLaPortPartnerResetAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of 8 bits,corresponding to the administrative values
of Partner_State.The first bit corresponds to bit 0 of Partner_State
(LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout),
the third bit corresponds to bit 2 (Aggregation),the fourth bit
corresponds to bit 3 (Synchronization),the fifth bit corresponds to
bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
bit corresponds to bit 7 (Expired).
This object allows the RESET of the values of Partner LACP_Activity,
LACP_Timeout and Aggregation.
Get operation on this object returns zeros for
the Partner administrative values"
::={snMspsLaPortEntry 6 }
snMspsLaPortActorAdminPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number used as dot3adAggPortActorPort and is
communicated in LACPDUs as the Actor_Port."
::={snMspsLaPortEntry 7 }
snMspsLaPortRestoreMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Restore mtu stores the original MTU of the port
before getting aggregated to port channel.
A SET on the MIB object is not allowed for SNMP users.
This operation is allowed only during config-save-restore
operation , during system initialization."
::={snMspsLaPortEntry 8 }
snMspsLaPortSelectAggregator OBJECT-TYPE
SYNTAX INTEGER {
static(0),
dynamic(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only object is used to display whether the port participates
in dynamic aggregator selection. The default will be static aggregation
selection.
static(0) - The port is involved only in static aggregation.
i.e. the port can be a member of only the aggregation
to which it is configured.
dynamic(1) - The port participates in dynamic aggregation
selection. i.e. the port will be a part of best
aggregation selected based on System id and Admin key.
This object is set to 'dynamic' once the port is configured as a default
port of a port channel."
::={snMspsLaPortEntry 9}
snMspsLagConfigPortLACPLMEnable OBJECT-TYPE
SYNTAX INTEGER {
off (1),
lacp-lm-on (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure LACP on Port:
off(1) - off ,
lacp-lm-on(2) - lacp link monitoring on."
::= { snMspsLaPortEntry 10 }
-- -------------------------------------------------------------
-- END OF Aggregation Port Group
-- -------------------------------------------------------------
-----------------------------------------------------------
-- LA Port Table objects Extension Table
-- ------------------------------------------------------------------
snMspsXLaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsXLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This augment table contains additional objects
for snMspsLaPortTable."
::= { snMspsLa 13 }
snMspsXLaPortEntry OBJECT-TYPE
SYNTAX SnMspsXLaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains management information applicable to
an interface."
AUGMENTS { snMspsLaPortEntry }
::= { snMspsXLaPortTable 1 }
SnMspsXLaPortEntry ::=
SEQUENCE {
snMspsXLaPortRowStatus
RowStatus
}
snMspsXLaPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Row status of this entry which
is used only in two scenarios.
1. CREATE_AND_WAIT
2. DESTROY.
Where '1' will be used during port creation
and '2' will be used during port deletion."
::= { snMspsXLaPortEntry 1 }
-----------------------------------------------------------
-- END OF LA Port Table objects Extension Table
-- ------------------------------------------------------------------
-- snMspsLa 14-20 reserved
snMspsLagSystemLACPLMTimeOut OBJECT-TYPE
SYNTAX INTEGER (75..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout in ms for the LACP-LM protocol."
::= { snMspsLa 21 }
snMspsLagSystemLACPLMRetry OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Retries for the LACP-LM protocol."
::= { snMspsLa 22 }
snMspsLagSystemFrameDistribution OBJECT-TYPE
SYNTAX INTEGER {
frame-distribution-src-mac(1),
frame-distribution-dst-mac(2),
frame-distribution-src-dst-mac(3),
frame-distribution-src-ip(4),
frame-distribution-dst-ip(5),
frame-distribution-src-dst-ip(6),
frame-distribution-src-dst-mac-hash(7),
frame-distribution-src-dst-mac-xor(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the frame distribution mechanism of the device for link aggregation.
frame-distribution-src-mac(1) frame distribution based on src MAC address
frame-distribution-dst-mac(2) frame distribution based on des MAC address
frame-distribution-src-dst-mac(3) frame distribution based on src and des MAC address
frame-distribution-src-ip(4) frame distribution based on src IP address
frame-distribution-dst-ip(5) frame distribution based on des IP address
frame-distribution-src-dst-ip(6) frame distribution based on src and des IP address
frame-distribution-src-dst-mac-hash(7) frame distribution based on src and dst MAC address hash
frame-distribution-src-dst-mac-xor(8) frame distribution based on src and dst MAC address xor"
::= { snMspsLa 23 }
snMspsDasScalars OBJECT IDENTIFIER ::= { snMspsDas 1 }
snMspsDasObjects OBJECT IDENTIFIER ::= { snMspsDas 2 }
-- --------------------------------------------------------------
-- DaS Scalars
-- --------------------------------------------------------------
snMspsDasNoOfEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of (host, IP) bindings, across
all VLANs, at a given time. This is nothing but the total
number of entries in the IP binding database"
::= { snMspsDasScalars 1 }
-- --------------------------------------------------------------
-- DaS Interface Control Table
-- --------------------------------------------------------------
snMspsDasConfigInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDasConfigInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides objects to enable or disable DaS functionality
on member ports of the tia-interface (or management vlan interface).
When DaS is enabled, DCP multicast packets are transmitted on member ports
and default DaS timer of 10 Seconds will be started. After timer expiry
information received from remote systems are dropped by DaS module.
Note: DCP (Discovery and Configuration Protocol) multicast packets are
not transmitted on mirrored destination and port-channel interfaces.
Example: Management vlan interface 1 has member ports (gi1/1, gi1/2 and gi1/3).
These Ports are connected to different remote systems.
case a) DaS enabled on Vlan 1:
DCP multicast packet, with a vlan tag according to port configurations, will be transmitted
out on each port (gi1/1, gi1/2 and gi1/3) and starts a default timer of
10 Seconds. Remote system information recevies on all these ports for a
duration of 10 Seconds and after timer expiry, packets received on all
these member ports will be dropped.
case b) DaS enabled on port gi1/2:
DCP multicast packet, with a vlan tag according to port configurations, will be transmitted
out on port gi1/2 and starts a default timer of 10 Seconds.
Note: Remote system's information will be recevied on all member ports of
management vlan interface or tia-interface for a duration of 10 Seconds
and after timer expiry, packets received on all these member ports will be
dropped."
::= { snMspsDasObjects 1 }
snMspsDasConfigInterfaceEntry OBJECT-TYPE
SYNTAX SnMspsDasConfigInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents an interface on which DaS status (enabled/disabled)
can be set."
INDEX { snMspsDasIfIndex }
::= {snMspsDasConfigInterfaceTable 1}
SnMspsDasConfigInterfaceEntry ::= SEQUENCE {
snMspsDasIfIndex InterfaceIndex,
snMspsDasStatus INTEGER
}
snMspsDasIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index on which remote system infomation is received. This is an index of
the table."
::= { snMspsDasConfigInterfaceEntry 1 }
snMspsDasStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the object is set to enabled(1), remote system information packets
are consumed on all member ports of management vlan interface or tia-interface
for a default timeout of 10 Seconds only.
When the object is set to disable(2), dcp (Discovery and Configuration
Protocol) packets are dropped by the DaS module."
DEFVAL { disabled }
::= { snMspsDasConfigInterfaceEntry 2 }
-- --------------------------------------------------------------
-- DaS Remote System Table
-- --------------------------------------------------------------
snMspsDasRemoteSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDasRemoteSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network connection known to
this local system. The local system may wish to ensure that only one remote
entry is present for each local port or it may choose to maintain multiple
remote entries for the same local port."
::= { snMspsDasObjects 2 }
snMspsDasRemoteSystemEntry OBJECT-TYPE
SYNTAX SnMspsDasRemoteSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries contain information about a particular physical network connection.
Entries may be created and deleted in this table by the local system."
INDEX { snMspsDasIfIndex, snMspsDasHostMac }
::= { snMspsDasRemoteSystemTable 1 }
SnMspsDasRemoteSystemEntry ::= SEQUENCE {
snMspsDasHostMac MacAddress,
snMspsDasIpAddrType InetAddressType,
snMspsDasIpAddr InetAddress,
snMspsDasIpAddrPfxLen InetAddressPrefixLength,
snMspsDasNextHopAddrType InetAddressType,
snMspsDasNextHopAddr InetAddress,
snMspsDasTypeOfStation SnmpAdminString,
snMspsDasNameOfStation SnmpAdminString,
snMspsDasSignalTimeOut Integer32,
snMspsDasDhcpOrIp INTEGER,
snMspsDasIpStatus INTEGER,
snMspsDasNameStatus INTEGER,
snMspsDasRemoteSystemStatus RowStatus
}
snMspsDasHostMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mac address of the remote system. This is an index of the table."
::= { snMspsDasRemoteSystemEntry 2 }
snMspsDasIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type (IPv4/IPv6) to discover or configure from remote system."
::= { snMspsDasRemoteSystemEntry 3 }
snMspsDasIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address to discover or configure from remote system."
::= { snMspsDasRemoteSystemEntry 4 }
snMspsDasIpAddrPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discovers the subnetmask of the remote IP address of remote system.
This object also can configure the subnetmask of remote system."
::= { snMspsDasRemoteSystemEntry 5 }
snMspsDasNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address type (IPv4/IPv6) of IP discovered or configured from remote system."
::= { snMspsDasRemoteSystemEntry 6 }
snMspsDasNextHopAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discovers the Gateway IP address of remote system. This object also can
configure the Gateway IP address of remote system."
::= { snMspsDasRemoteSystemEntry 7 }
snMspsDasTypeOfStation OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..25))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the type of station description of given
port associated with the remote system. The length of the string is
restricted to 25."
::= { snMspsDasRemoteSystemEntry 8 }
snMspsDasNameOfStation OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value used to identify discovered remote sytem name information.
This object can configure remote system name. The string length is restricted
to 128 including '\0' character."
::= { snMspsDasRemoteSystemEntry 9 }
snMspsDasSignalTimeOut OBJECT-TYPE
SYNTAX Integer32 (5..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The signal time is provided to make the remote system blink for the configured
time interval. The time interval to be configured multiples of 5.
As remote system device blink for approximate 2 to 3 Seconds."
::= { snMspsDasRemoteSystemEntry 10 }
snMspsDasDhcpOrIp OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ip (1),
dhcp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the remote system IP information, whether IP is
dynamically allocated by DHCP or configured manually.
This option is fetched from the DCP packet."
DEFVAL { none }
::= { snMspsDasRemoteSystemEntry 11 }
snMspsDasIpStatus OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ipDiscovered (1),
ipConfigured (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the information, whether IP is discovered from the
remote system or configured locally."
DEFVAL { none }
::= { snMspsDasRemoteSystemEntry 12 }
snMspsDasNameStatus OBJECT-TYPE
SYNTAX INTEGER {
none (0),
nameDiscovered (1),
nameConfigured (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the information, whether Name is discovered from the
remote system or configured locally."
DEFVAL { none }
::= { snMspsDasRemoteSystemEntry 13 }
snMspsDasRemoteSystemStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The status of the row.
NOT_READY, CREATE_AND_WAIT, CREATE_AND_GO and DESTROY are not allowed.
Before changing the objects make the rowstatus as NOT_IN_SERVICE, fill the
objects and then make rowstatus ACTIVE.
"
::= { snMspsDasRemoteSystemEntry 14 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
snMspsEtherNetIPOperStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Mode of EtherNet/IP"
::= { snMspsEthernetIp 1 }
snMspsEtherNetIPAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Next Mode of EtherNet/IP after the next reboot takes place."
::= { snMspsEthernetIp 2 }
snMspsEtherNetIPEncapsulationInactivityTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of seconds of inactivity before TCP connection is closed"
DEFVAL { 120 }
::= { snMspsEthernetIp 6 }
snMspsEtherNetIPHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Host Name attribute contains the device's host name, which can be used for informational purposes."
::= { snMspsEthernetIp 9}
-- ------------------------------------------------------------
-- Textual Conventions
-- ------------------------------------------------------------
InnerVlanIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A value used to represent the Inner VLAN that might be
carried in a packet.
A value between 1 and 4094 inclusive, represents
a valid vlan and is used only in cases where the
switch understands and is capable of handling
double tagged packets.
A value 0 is used in cases where the switch understands
and is capable of handling only single tagged packets."
SYNTAX Unsigned32 (0..4094)
-- Instance Based Global Configuration Table
snMspsSnoopInstanceGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopInstanceGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains multicast forwarding mode configuration
for each instance running in the snooping switch"
::= { snMspsSnooping 1 }
snMspsSnoopInstanceGlobalEntry OBJECT-TYPE
SYNTAX SnMspsSnoopInstanceGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains instance number and the multicast
forwarding mode configuration for the particular instance"
INDEX { snMspsSnoopInstanceGlobalInstId }
::= { snMspsSnoopInstanceGlobalTable 1 }
SnMspsSnoopInstanceGlobalEntry ::= SEQUENCE {
snMspsSnoopInstanceGlobalInstId Integer32,
snMspsSnoopInstanceGlobalMcastFwdMode INTEGER,
snMspsSnoopInstanceGlobalSystemControl INTEGER,
snMspsSnoopInstanceGlobalLeaveConfigLevel INTEGER,
snMspsSnoopInstanceGlobalEnhancedMode INTEGER,
snMspsSnoopInstanceGlobalReportProcessConfigLevel INTEGER,
snMspsSnoopInstanceGlobalSparseMode INTEGER
}
snMspsSnoopInstanceGlobalInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the global configuration entry."
::= { snMspsSnoopInstanceGlobalEntry 1 }
snMspsSnoopInstanceGlobalMcastFwdMode OBJECT-TYPE
SYNTAX INTEGER { ipbased(1), macbased(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode to be used for building the forwarding
table i.e, whether IP based or MAC address based.
The hardware should support programming of S,G and *,G
entries for IGS/MLDS to operate in 'ipbased' mode.
If the hardware supports only MAC based multicast tables
then 'macbased' mode should be chosen."
DEFVAL { 2 }
::= { snMspsSnoopInstanceGlobalEntry 2 }
snMspsSnoopInstanceGlobalSystemControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Snooping module is shutdown or started through this object.
When set to 'start', resources required by the device
SNOOP module is allocated and the module starts running.
When set to 'shutdown', all the resources are released back
to the system and the module stops running."
DEFVAL { 1 }
::= { snMspsSnoopInstanceGlobalEntry 3 }
snMspsSnoopInstanceGlobalLeaveConfigLevel OBJECT-TYPE
SYNTAX INTEGER { vlanbased(1), portbased(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A global configuration to specify if the leave processing
mechanism needs to be configured at the vlan level or at
the port level.
When this object is set to vlanbased, the mib object
snMspsSnoopVlanFastLeave must be used to configure the leave
mechanism.
When this object is set to portbased, the mib object
snMspsSnoopPortLeaveMode must be used to configure the leave
mechanism."
DEFVAL { 1 }
::= { snMspsSnoopInstanceGlobalEntry 4 }
snMspsSnoopInstanceGlobalEnhancedMode OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable or disable the snooping module
functioning in the enhanced mode.
By default, the snooping module operates in the normal or
default mode. In the default mode, the module multicasts from
an Outer VLAN (SVLAN) to a set of ports. The Inner VLAN (CVLAN)
will typically have a value of zero. In this mode, an S-tagged
multicast data or query packet from one port can result in
multiple packets on separate egress ports, but only one packet
on any one egress port with an S-tag or with no tag.
Enabling this object causes the snooping module to operate in
the enhanced mode. The module multicasts from an Outer VLAN
(SVLAN) to a set of ports & Inner VLANs (CVLAN). In this mode,
an S-tagged multicast data or query packet from one port can
result in multiple copies of the packet on the same egress port,
each with a different C-tag. The Inner VLAN (CVLAN) will
typically have a valid value within the designated range.
However under certain scenarios, the Inner VLAN may also have a
value of zero.
Disabling this object causes the snooping module to operate in
the default mode."
DEFVAL { disable }
::= { snMspsSnoopInstanceGlobalEntry 5}
snMspsSnoopInstanceGlobalReportProcessConfigLevel OBJECT-TYPE
SYNTAX INTEGER { nonrouterports(1), allports(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A global configuration to specify if the report processing
mechanism needs to be configured for the non-router ports or
at the all ports level.
When this object is set to non-router ports, the incoming
report messages are process only on the non-router ports.
When this object is set to all-ports, the incoming
report messages are processed in all ports which includes
router ports also.
By default report messages were not processed on the router
ports(i.e) report process config level is non-router-ports."
DEFVAL { 1 }
::= { snMspsSnoopInstanceGlobalEntry 6 }
snMspsSnoopInstanceGlobalSparseMode OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable or disable the snooping module
functioning in the sparse mode.
By default, the snooping module operates in the non-sparse
mode. In the non-sparse mode, the module will be used to
forward the unknown multicast traffic when IGS is enabled
in the switch. In the sparse mode (i.e Sparse mode is enabled),
the module will be used to drop the unknown multicast traffic
when IGS is enabled in the switch.
Disabling this object causes the snooping module to operate in
the default mode."
DEFVAL { disable }
::= { snMspsSnoopInstanceGlobalEntry 7 }
snMspsSnoopInstanceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopInstanceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains global configuration of snooping for each
instance running in switch"
::= { snMspsSnooping 2 }
snMspsSnoopInstanceConfigEntry OBJECT-TYPE
SYNTAX SnMspsSnoopInstanceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains instance number, address type and the list of
global configuration for the particular instance and address type"
INDEX { snMspsSnoopInstanceConfigInstId,
snMspsSnoopInetAddressType }
::= { snMspsSnoopInstanceConfigTable 1 }
SnMspsSnoopInstanceConfigEntry ::= SEQUENCE {
snMspsSnoopInstanceConfigInstId Integer32,
snMspsSnoopInetAddressType InetAddressType,
snMspsSnoopStatus INTEGER,
snMspsSnoopProxyReportingStatus INTEGER,
snMspsSnoopRouterPortPurgeInterval Integer32,
snMspsSnoopPortPurgeInterval Integer32,
snMspsSnoopReportForwardInterval Integer32,
snMspsSnoopRetryCount Integer32,
snMspsSnoopGrpQueryInterval Integer32,
snMspsSnoopReportFwdOnAllPorts INTEGER,
snMspsSnoopTraceOption Integer32,
snMspsSnoopOperStatus INTEGER,
snMspsSnoopSendQueryOnTopoChange INTEGER,
snMspsSnoopSendLeaveOnTopoChange INTEGER,
snMspsSnoopFilterStatus INTEGER,
snMspsSnoopMulticastVlanStatus INTEGER,
snMspsSnoopProxyStatus INTEGER,
snMspsSnoopQueryFwdOnAllPorts INTEGER,
snMspsSnoopQuerierStatus INTEGER,
snMspsSnoopGlobalSnoopStatus INTEGER
}
snMspsSnoopInstanceConfigInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the global configuration entry."
::= { snMspsSnoopInstanceConfigEntry 1 }
snMspsSnoopInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to the global configuration entry.
This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopInstanceConfigEntry 2 }
snMspsSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP/MLD snooping in the system.
When set to 'enabled', the device IGS/MLDS module starts
protocol operations.
When set to 'disabled', the IGS/MLDS module stops performing
protocol operations."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 3 }
snMspsSnoopProxyReportingStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables proxy-reporting in the system.
When proxy-reporting is 'enabled' the switch generates
reports and forwards them to the router based on the
available host information.
When proxy-reporting is 'disabled' the switch forwards
all SSM (IGMPv3/MLDv2) and a single ASM (IGMPv2/MLDv1)
report to the router.
Proxy-reporting can be enabled only if Proxy is disabled. "
DEFVAL { 1 }
::= { snMspsSnoopInstanceConfigEntry 4 }
snMspsSnoopRouterPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted.
This object is deprecated and corresponding functionality is met
using the objects in snMspsSnoopRtrPortTable. If configured,
this value overrides the value used in snMspsSnoopRtrPortTable."
DEFVAL { 125 }
::= { snMspsSnoopInstanceConfigEntry 5 }
snMspsSnoopPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (130..1225)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received, this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group.
This object is deprecated and corresponding functionality is met
using a read only object in snMspsSnoopVlanFilterTable. If configured,
this value overrides the value used in snMspsSnoopVlanFilterTable."
DEFVAL {260}
::= { snMspsSnoopInstanceConfigEntry 6 }
snMspsSnoopReportForwardInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This timer is used when both proxy and proxy-reporting is
disabled. The switch then has to suppress multiple
IGMPv2/ MLDv1 report messages for the same group from being
forwarded to the router.
This is the interval (in seconds) within which report
messages for the same multicast group will not be forwarded.
The 'ReportForwardTimer' is per multicast group. This timer is
started as soon as a report message for that group is forwarded
out. Within this 'ReportForwardInterval' if another report for
the same group arrives, that report will not be forwarded."
DEFVAL { 5 }
::= { snMspsSnoopInstanceConfigEntry 7 }
snMspsSnoopRetryCount OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In proxy/proxy-reporting mode, when the switch receives leave
message on a port, it sends group specific query to check if
there are any other interested v2 receivers for the group.
This attribute defines the maximum number of queries sent by
the switch before deleting the port from the group membership
information in the forwarding database. If the maximum retry
count exceeds 'snMspsSnoopRetryCount', then the port will be deleted
from the multicast group membership information in the
forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 8 }
snMspsSnoopGrpQueryInterval OBJECT-TYPE
SYNTAX Integer32 (2..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there are any intersted receivers. The switch will send
'snMspsSnoopRetryCount' queries before removing the port from the
group membership information in the forwarding database."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 9 }
snMspsSnoopReportFwdOnAllPorts OBJECT-TYPE
SYNTAX INTEGER { allports(1), rtrports(2), nonedgeports(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In snooping mode, Snooping module will forward reports only
on router ports by default. This object provides administrative
control either to forward the reports on all the member ports of the
VLAN or to forward the report on SpanningTree non edge ports.
This configuration will not be valid in proxy or proxy-reporting
mode"
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 10 }
snMspsSnoopTraceOption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable trace statements in
snooping module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping between the bit positions & the trace level is
as follows:
0 - Init and Shutdown traces
1 - Management traces
2 - Data Path traces
3 - Control Plane traces
4 - Packet Dump traces
5 - Traces related to all resources except buffers
6 - All Failure traces
7 - Buffer allocation/release traces
The remaining bits are unused. Combination of levels are
also allowed.
For example if the bits 0 and 1 are set, then the trace
statement related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding integer value for the
bits set. For example if bits 0 and 1 are to be set ,then user
has to give the value 3."
::= { snMspsSnoopInstanceConfigEntry 11 }
snMspsSnoopOperStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the IGS/MLDS protocol.
The value enabled(1) indicates the IGS/MLDS module is currently
enabled in the system.
The value disable(1) indicates the IGS/MLDS module is currently
disabled in the system."
::= { snMspsSnoopInstanceConfigEntry 12 }
snMspsSnoopSendQueryOnTopoChange OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Snooping Switch can be configured to send IGMP/MLD General
queries on all non router ports when spanning tree topology
change occurs in a network. If the spanning tree mode is RSTP,
IGMP/MLD general queries will be sent on all the non router ports
present in the switch.If the spanning tree mode is MSTP, IGMP/MLD
general queries will be sent on all the non router ports of the
VLAN mapped for the MSTP instance.When this object is set to
'enabled' ,the switch will generate general query messages. This
object cannot be enabled if snMspsSnoopSendLeaveOnTopoChange is
enabled. "
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 13 }
snMspsSnoopSendLeaveOnTopoChange OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Snooping Switch can be configured to issue an IGMP proxy
query solicitation on network ports, i.e. an IGMP Group Leave
with group address 0.0.0.0. This will indicate to the upstream
router that it immediately needs to send Group Specific queries,
which will result in populating the L2 multicast tables in the
snooping switch in order to speed up network convergence. This
object cannot be enabled if snMspsSnoopSendQueryOnTopoChange is
enabled.
This is not applicable for proxy-reporting and proxy."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 14 }
snMspsSnoopFilterStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the IGS filtering feature.
Interface mapping configurations will not be affected by this object
status.
When this object is disabled, filters will not be applied in this
instance but the profile mapping and registration limits can be
configured."
DEFVAL { disabled }
::= { snMspsSnoopInstanceConfigEntry 15 }
snMspsSnoopMulticastVlanStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the Multicast VLAN feature.
When Multicast VLAN feature is enabled, each incoming untagged report
or leave message will be classified to an M-VLAN, depending on
whether any M-VLAN configuration exists for the particular Group
and/or Source address, configured using the
snMspsSnoopVlanMulticastProfileId object.
When Multicast VLAN feature is disabled, the usual VLAN
classification rules apply."
DEFVAL { disabled }
::= { snMspsSnoopInstanceConfigEntry 16 }
snMspsSnoopProxyStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables Proxy in the system.
Proxy can be enabled only if Proxy-reporting is disabled.
In proxy mode, the switch act as querier for all
downstream interfaces, act as host for all
upstream interfaces.
In proxy mode, switch sends out general query on all
downstream interfaces on every query interval and updates
membership database based on the reports received.
For upstream interfaces, when queried, proxy trasnmits
current state consolidated report. For any change in
membership databases, state change report is formed and
transmitted on upstream interfaces."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 17 }
snMspsSnoopQueryFwdOnAllPorts OBJECT-TYPE
SYNTAX INTEGER { allports(1), nonrtrports(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In proxy and proxy reporting mode, Snooping module will send
query messages only to the non-router ports by default.
This object provides administrative control to forward the
query messages on all the member ports of the VLAN."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 18 }
snMspsSnoopQuerierStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP/MLD queries
when IGMP/MLD routers are not present in the snooping VLAN
interfaces. When set to 'enabled' the switch will generate
general query messages on all the snooping vlan interfaces.
The query messages will be suppressed if the switch receives
the query message from any other router in the VLAN. Switch
should be configured as a querier only when there
are no queriers in the network.
This configuration is valid only in proxy reporting mode."
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 19 }
snMspsSnoopGlobalSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP/MLD snooping in the system.
This mib object controls snMspsSnoopStatus
and snMspsSnoopVlanSnoopStatus. This Mib object is
optional configuration.
When set to 'enabled', the device IGS/MLDS module starts
protocol operations, enables snMspsSnoopStatus and enables
snMspsSnoopVlanSnoopStatus on all the layer 2 vlans.
When set to 'disabled', the IGS/MLDS module snooping status
can be controlled through the MIB objects snMspsSnoopStatus
and snMspsSnoopVlanSnoopStatus.
"
DEFVAL { 2 }
::= { snMspsSnoopInstanceConfigEntry 20 }
-- VLAN based filter table
snMspsSnoopVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { snMspsSnooping 3 }
snMspsSnoopVlanFilterEntry OBJECT-TYPE
SYNTAX SnMspsSnoopVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { snMspsSnoopVlanFilterInstId,
snMspsSnoopVlanFilterVlanId,
snMspsSnoopVlanFilterInetAddressType }
::= { snMspsSnoopVlanFilterTable 1 }
SnMspsSnoopVlanFilterEntry ::= SEQUENCE {
snMspsSnoopVlanFilterInstId Integer32,
snMspsSnoopVlanFilterVlanId Integer32,
snMspsSnoopVlanFilterInetAddressType InetAddressType,
snMspsSnoopVlanSnoopStatus INTEGER,
snMspsSnoopVlanOperatingVersion INTEGER,
snMspsSnoopVlanCfgOperVersion INTEGER,
snMspsSnoopVlanFastLeave INTEGER,
snMspsSnoopVlanQuerier INTEGER,
snMspsSnoopVlanCfgQuerier INTEGER,
snMspsSnoopVlanQueryInterval Integer32,
snMspsSnoopVlanRtrPortList PortList,
snMspsSnoopVlanRowStatus RowStatus,
snMspsSnoopVlanStartupQueryCount Integer32,
snMspsSnoopVlanStartupQueryInterval Integer32,
snMspsSnoopVlanOtherQuerierPresentInterval Integer32
}
snMspsSnoopVlanFilterInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to VLAN filter table entry."
::= { snMspsSnoopVlanFilterEntry 1 }
snMspsSnoopVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" VLAN ID for which snooping configuration is to be done."
::= { snMspsSnoopVlanFilterEntry 2 }
snMspsSnoopVlanFilterInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates whether the row belongs to IGS/MLD snooping"
::= { snMspsSnoopVlanFilterEntry 3 }
snMspsSnoopVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGS/MLDS on that specific VLAN"
DEFVAL { 1 }
::= { snMspsSnoopVlanFilterEntry 4 }
snMspsSnoopVlanOperatingVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2).
This object is deprecated. Its functionality is met by
snMspsSnoopRtrPortOperVersion object."
::= { snMspsSnoopVlanFilterEntry 5 }
snMspsSnoopVlanCfgOperVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e., V2(2).
The 'snMspsSnoopVlanCfgOperVersion' should be configured on the
basis of the router version present in the VLAN.
This configuration should be used only when one router port
is existing in the VLAN.
This object is deprecated and corresponding functionality is met
using snMspsSnoopRtrPortCfgOperVersion object available in
snMspsSnoopRtrPortTable. If configured, consolidated reports sent
on upstream interfaces will use this version."
DEFVAL { 3 }
::= { snMspsSnoopVlanFilterEntry 6 }
snMspsSnoopVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 7 }
snMspsSnoopVlanQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is configured as a querier in the VLAN"
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 8 }
snMspsSnoopVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP/MLD queries
when IGMP/MLD routers are not present in the VLAN. When set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other router in the VLAN. Switch
should be configured as a querier for a VLAN only when there
are no queriers in the network.
This configuration is valid only in proxy reporting mode."
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 9 }
snMspsSnoopVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries in proxy and proxy-reporting mode.
In proxy-reporting mode, General queries will be sent
on all downstream interfaces with this interval only if
the switch is the Querier.
In proxy mode, switch will be querier for all downstream
interfaces. General queries will be sent on all downstream
interfaces with this interval."
DEFVAL { 125 }
::= { snMspsSnoopVlanFilterEntry 10 }
snMspsSnoopVlanRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports.
statically. This object may not be sufficient to represent the
full set of interfaces in each switch instance in environments
where the number of interfaces in the system is scaled to a
large value."
::= { snMspsSnoopVlanFilterEntry 11 }
snMspsSnoopVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a row in the VLAN filter table. Using this
object, new entries can be created in the VLAN filter table
and the existing entries can be removed from the
VLAN filter table"
::= { snMspsSnoopVlanFilterEntry 12 }
snMspsSnoopVlanStartupQueryCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Startup Query Count is the number of Queries sent out on
startup, separated by the Startup Query Interval.
The default value is the Robustness."
DEFVAL { 2 }
::= { snMspsSnoopVlanFilterEntry 13 }
snMspsSnoopVlanStartupQueryInterval OBJECT-TYPE
SYNTAX Integer32 (15..150)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between the general query messages sent by the switch
during startup of querier election process.
This value must be <= (Query Interval/4)"
DEFVAL { 32 }
::= { snMspsSnoopVlanFilterEntry 14 }
snMspsSnoopVlanOtherQuerierPresentInterval OBJECT-TYPE
SYNTAX Integer32 (120..1235)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Other Querier Present Interval is the length of time that
must pass before a multicast router decides that there is no
longer another multicast router which should be the querier.
This value must be >= ((Robustness Variable * Query Interval)
+ (Query Response Interval/2)).
Maximum value for the object varies for IGS and MLDS.
For IGS, the max value supported is 1215.
For MLDS, the max value supported is 1235.
The default value for the object is same for both IGS and MLDS."
DEFVAL { 255 }
::= { snMspsSnoopVlanFilterEntry 15 }
-- The Extention table for VLAN based FilterEntry
snMspsSnoopVlanFilterXTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopVlanFilterXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is an extention table of snMspsSnoopVlanFilterTable"
::= { snMspsSnooping 4 }
snMspsSnoopVlanFilterXEntry OBJECT-TYPE
SYNTAX SnMspsSnoopVlanFilterXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains configurations for specific VLANs"
AUGMENTS { snMspsSnoopVlanFilterEntry }
::= { snMspsSnoopVlanFilterXTable 1 }
SnMspsSnoopVlanFilterXEntry ::= SEQUENCE {
snMspsSnoopVlanBlkRtrPortList PortList,
snMspsSnoopVlanFilterMaxLimitType INTEGER,
snMspsSnoopVlanFilterMaxLimit Unsigned32,
snMspsSnoopVlanFilter8021pPriority Integer32,
snMspsSnoopVlanFilterDropReports INTEGER,
snMspsSnoopVlanMulticastProfileId Unsigned32,
snMspsSnoopVlanPortPurgeInterval Integer32,
snMspsSnoopVlanMaxResponseTime Integer32,
snMspsSnoopVlanRtrLocalPortList PortList,
snMspsSnoopVlanBlkRtrLocalPortList PortList
}
snMspsSnoopVlanBlkRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as blocked router
ports statically. This object may not be sufficient to represent
full set of interfaces in each switch instance in environments
where the number of interfaces in the system is scaled to a
large value."
::= { snMspsSnoopVlanFilterXEntry 1 }
snMspsSnoopVlanFilterMaxLimitType OBJECT-TYPE
SYNTAX INTEGER { none(0), groups(1), channels(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of limit to be applied on this VLAN.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for groups. The
channel limit will be applied only for IGMPv3 Include &
Allow reports whereas the group limit will be applied for
all IGMP reports.
By default, this object has a value of 0 ('none') and no
limiting is done i.e. the value of snMspsSnoopVlanFilterMaxLimit
is ignored when this object is set to 'none'."
DEFVAL { none }
::= { snMspsSnoopVlanFilterXEntry 2 }
snMspsSnoopVlanFilterMaxLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the maximum number of unique entries (channel or group)
that can be learned simultaneously on this VLAN. The
snMspsSnoopVlanFilterMaxLimitType must be set before configuring
this object. If snMspsSnoopVlanFilterMaxLimitType is 'channels',
this limit applies to number of channels that can be joined
on this VLAN. If snMspsSnoopVlanFilterMaxLimitType is 'groups',
this limit applies to number of groups that can be joined on
this VLAN.
By default, this object will hold a value of zero and will
not limit any IGMP packets as long as the value of
snMspsSnoopVlanFilterMaxLimitType is set to 'none'. However, when
snMspsSnoopVlanFilterMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the
maximum groups or channels registrations that the system can
support."
DEFVAL { 0 }
::= { snMspsSnoopVlanFilterXEntry 3 }
snMspsSnoopVlanFilter8021pPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the priority with which the reports assigned to this
VLAN should be processed by the hardware as well as by the
upstream router. Priority 0 means lowest priority while priority
7 means highest priority. This value will be used to update the
priority bits in the ethernet header."
DEFVAL { 7 }
::= { snMspsSnoopVlanFilterXEntry 4 }
snMspsSnoopVlanFilterDropReports OBJECT-TYPE
SYNTAX INTEGER { none(0), igmpv1(1), igmpv2(2), all(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Some implementations might require that IGMPv1 should not be
supported, as IGMPv1 does not have any group leaving mechanism.
Some other implementations might require that both IGMPv1 and
IGMPv2 reports should be dropped, as they do not support SSM.
So in such cases, this object can be used. If set to 'igmpv1',
incoming IGMPv1 Reports will be dropped. If set to 'igmpv2',
both IGMPv1 reports and IGMPv2 reports will be dropped.
In case there is no need to process any reports (for
diagnostic purposes or so), this object can be set to 'all'."
DEFVAL { 0 }
::= { snMspsSnoopVlanFilterXEntry 5 }
snMspsSnoopVlanMulticastProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the multicast profile id configured for a
particular VLAN and is used for multicast vlan classification.
When any untagged report or leave message is received (i.e. packet
with no tag in a Customer Bridge or packet with no S-tag in a
Provider or 802.1ad Bridge), and if the Group & Source address in
the received packet matches any rule in this profile, then the
received packet is classified to be associated to the VLAN (that is,
Multicast VLAN) to which this profile is mapped.
By default, no profile is associated to any VLAN."
DEFVAL { 0 }
::= { snMspsSnoopVlanFilterXEntry 6 }
snMspsSnoopVlanPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received,this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group."
::= { snMspsSnoopVlanFilterXEntry 7 }
snMspsSnoopVlanMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (0..65025)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum response code advertised in queries send over this
vlan.This object is used to configure max response code for
both IGS and MLDS.Minimum value for the object is zero for both
IGS and MLDS. Max value and defualt value for the object varries
for IGS and MLDS.
For IGS, the max value supported is 255. The default value is
100.Its unit is in tenths of a second.
For MLDS, the max value supported is 65025. The default value
is 10000. Its unit is in milliseconds."
::= { snMspsSnoopVlanFilterXEntry 8 }
snMspsSnoopVlanRtrLocalPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports.
Each bit in this object represent interfaces denoted by the
object snMspsVcHlPortId associated to the instance identifier
denoted by snMspsSnoopVlanFilterInstId. This object alone
should be referred in environments where the number of
interfaces in the system is scaled to a large value , as the
object snMspsSnoopVlanRtrPortList may not be sufficient to represent
the full set of interfaces in each switch instance."
::= { snMspsSnoopVlanFilterXEntry 9 }
snMspsSnoopVlanBlkRtrLocalPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as blocked router
ports. Each bit in this object represent interfaces denoted by
the object snMspsVcHlPortId associated to the instance identifier
denoted by snMspsSnoopVlanFilterInstId. This object alone should be
referred in environments where the number of interfaces in the
system is scaled to a large value, as the object
snMspsSnoopVlanBlkRtrPortList may not be sufficient to represent the
full set of interfaces in each switch instance."
::= { snMspsSnoopVlanFilterXEntry 10 }
-- ----------------------------
-- Snoop Port Config Table
-- ----------------------------
snMspsSnoopPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Port-related configurable information.
This table is applicable only when the snooping module is
operating in the default Mode. This table MUST NOT be
configured when the snooping module is operating in the
enhanced mode."
::= { snMspsSnooping 5 }
snMspsSnoopPortEntry OBJECT-TYPE
SYNTAX SnMspsSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of paramter/attribute objects
that can be configured on a port."
INDEX { snMspsSnoopPortIndex,
snMspsSnoopPortInetAddressType }
::= { snMspsSnoopPortTable 1 }
SnMspsSnoopPortEntry ::= SEQUENCE {
snMspsSnoopPortIndex InterfaceIndex,
snMspsSnoopPortInetAddressType InetAddressType,
snMspsSnoopPortLeaveMode INTEGER,
snMspsSnoopPortRateLimit Unsigned32,
snMspsSnoopPortMaxLimitType INTEGER,
snMspsSnoopPortMaxLimit Unsigned32,
snMspsSnoopPortProfileId Unsigned32,
snMspsSnoopPortMemberCnt Unsigned32,
snMspsSnoopPortMaxBandwidthLimit Unsigned32,
snMspsSnoopPortDropReports INTEGER,
snMspsSnoopPortRowStatus RowStatus
}
snMspsSnoopPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port."
::= { snMspsSnoopPortEntry 1 }
snMspsSnoopPortInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopPortEntry 2 }
snMspsSnoopPortLeaveMode OBJECT-TYPE
SYNTAX INTEGER {
explicithosttrack (1),
fastleave (2),
normalleave (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the mechanism to be used for processing the leave messages
in the down stream interface.
When this object is set to 'explicitHostTrack', then the leave
messages are processed using the explicit host tracking
mechanism.
When this object is set to 'fastLeave', the leave messages
are processed by the fast leave mechanism.
When this object is set to 'normalLeave', for every
leave message received, a group or group specific query is sent
on the interface.
This object can be configured only when
snMspsSnoopInstanceGlobalLeaveConfigLevel is set to portbased.
This object is applicable only for processing the igmp v2 leave
messages. For igmpv3 reports, the explicit host tracking
functionality is always performed for tracking the source
registrations and it cannot be disabled (i.e.) configuration
using this object has no effect."
DEFVAL { normalleave }
::= { snMspsSnoopPortEntry 3 }
snMspsSnoopPortRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsigned integer and will not rate limit any IGMP packets.
The actual rate supported, however, will depend on what the
system can support. If this object is configured as zero, then
no IGMP packets will be processed on this interface."
DEFVAL { 4294967295 }
::= { snMspsSnoopPortEntry 4 }
snMspsSnoopPortMaxLimitType OBJECT-TYPE
SYNTAX INTEGER { none(0), groups(1), channels(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for groups.
The channel limit will be applied only for IGMPv3 Include &
Allow reports whereas the group limit will be applied for
all IGMP reports.
By default, this object has a value of 0 ('none') and no
limiting is done i.e. the value of snMspsSnoopPortMaxLimit
is ignored when this object is set to 'none'."
DEFVAL { none }
::= { snMspsSnoopPortEntry 5 }
snMspsSnoopPortMaxLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The snMspsSnoopPortMaxLimitType must be set before configuring
this object. However the Max-limit is configurable even if the
limit type is 'none', but the limit won't be in effect unless
the limit type is set as 'channels' or 'groups'.
If snMspsSnoopPortMaxLimitType is 'channels',
this limit applies to number of channels that can be joined
on this interface. If snMspsSnoopPortMaxLimitType is 'groups',
this limit applies to number of groups that can be joined on
this interface.
By default, this object will hold a value of zero and will
not limit any IGMP packets as long as the value of
snMspsSnoopPortMaxLimitType is set to 'none'. However, when
snMspsSnoopPortMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the
maximum groups or channels registrations that the system can
support."
DEFVAL { 0 }
::= { snMspsSnoopPortEntry 6 }
snMspsSnoopPortProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received
through this downstream interface. By default, no profiles
are applied on the interface."
DEFVAL { 0 }
::= { snMspsSnoopPortEntry 7 }
snMspsSnoopPortMemberCnt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the total number of groups or channels active on the
interface at the given time."
::= { snMspsSnoopPortEntry 8 }
snMspsSnoopPortMaxBandwidthLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Maximum bandwidth allowed on this port for Multicast.
The snMspsSnoopPortMaxLimitType must be set before configuring
this object. If the snMspsSnoopPortMaxLimitType is 'channels',
this limit applies to the bandwidth of channels going through
the port. It means that both Source as well as Group will be
considered for getting the configured bandwidth of multicast
data. If the snMspsSnoopPortMaxLimitType is 'groups', only
Group address will be considered for getting the configured
bandwidth of multicast data. Whenever a join comes, the
bandwidth corresponding to the joined channel or group, will be
reserved on the port. No new joins will be accepted, if the
reserved bandwidth gets greater that the configured
MaxBandwidth."
::= { snMspsSnoopPortEntry 9 }
snMspsSnoopPortDropReports OBJECT-TYPE
SYNTAX INTEGER { allow(1), drop(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides whether to process or drop the
IGMP reports coming on this port."
DEFVAL { 1 }
::= { snMspsSnoopPortEntry 10 }
snMspsSnoopPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table. "
::= { snMspsSnoopPortEntry 11 }
-- ------------------------------------------------------------------
-- Snoop Enhanced Port Config Table
-- ------------------------------------------------------------------
snMspsSnoopEnhPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopEnhPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Port-related configurable information.
This table is applicable only when the snooping module is
operating in the enhanced Mode. This table MUST NOT be
configured when the snooping module is operating in the
default mode."
::= { snMspsSnooping 6 }
snMspsSnoopEnhPortEntry OBJECT-TYPE
SYNTAX SnMspsSnoopEnhPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of paramter/attribute objects that
can be configured on an interface."
INDEX {
snMspsSnoopEnhPortIndex,
snMspsSnoopEnhPortInnerVlanId,
snMspsSnoopEnhPortInetAddressType
}
::= { snMspsSnoopEnhPortTable 1 }
SnMspsSnoopEnhPortEntry ::= SEQUENCE {
snMspsSnoopEnhPortIndex InterfaceIndex,
snMspsSnoopEnhPortInnerVlanId InnerVlanIndex,
snMspsSnoopEnhPortInetAddressType InetAddressType,
snMspsSnoopEnhPortLeaveMode INTEGER,
snMspsSnoopEnhPortRateLimit Unsigned32,
snMspsSnoopEnhPortMaxLimitType INTEGER,
snMspsSnoopEnhPortMaxLimit Unsigned32,
snMspsSnoopEnhPortProfileId Unsigned32,
snMspsSnoopEnhPortMemberCnt Unsigned32,
snMspsSnoopEnhPortMaxBandwidthLimit Unsigned32,
snMspsSnoopEnhPortDropReports INTEGER,
snMspsSnoopEnhPortRowStatus RowStatus
}
snMspsSnoopEnhPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port."
::= { snMspsSnoopEnhPortEntry 1 }
snMspsSnoopEnhPortInnerVlanId OBJECT-TYPE
SYNTAX InnerVlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Inner VLAN Identifier."
::= { snMspsSnoopEnhPortEntry 2 }
snMspsSnoopEnhPortInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopEnhPortEntry 3 }
snMspsSnoopEnhPortLeaveMode OBJECT-TYPE
SYNTAX INTEGER {
explicithosttrack (1),
fastleave (2),
normalleave (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the mechanism to be used for processing the leave messages
in the down stream interface.
When this object is set to 'explicitHostTrack', then the leave
messages are processed using the explicit host tracking
mechanism.
When this object is set to 'fastLeave', the leave messages
are processed by the fast leave mechanism.
When this object is set to 'normalLeave', for every
leave message received, a group or group specific query is sent
on the interface.
This object can be configured only when
snMspsSnoopInstanceGlobalLeaveConfigLevel is set to portbased.
This object is applicable only for processing the igmp v2 leave
messages. For igmpv3 reports, the explicit host tracking
functionality is always performed for tracking the source
registrations and it cannot be disabled.
For the v3 INCLUDE NONE reports the leave handling behavior is
similar to the v2 leave messages for the leave modes
'explicitHostTrack' and 'fastLeave'. For the leave mode
'normalLeave' query message is not sent on the interface
and only the host registered for the multicast group is removed" DEFVAL { normalleave }
::= { snMspsSnoopEnhPortEntry 4 }
snMspsSnoopEnhPortRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsigned integer and will not rate limit any IGMP packets.
The actual rate supported, however, will depend on what the
system can support. If this object is configured as zero, then
no IGMP packets will be processed on this interface."
DEFVAL { 4294967295 }
::= { snMspsSnoopEnhPortEntry 5 }
snMspsSnoopEnhPortMaxLimitType OBJECT-TYPE
SYNTAX INTEGER { none(0), groups(1), channels(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for groups.
The channel limit will be applied only for IGMPv3 Include &
Allow reports whereas the group limit will be applied for
all IGMP reports.
By default, this object has a value of 0 ('none') and no
limiting is done i.e. the value of snMspsSnoopEnhPortMaxLimit
is ignored when this object is set to 'none'."
DEFVAL { none }
::= { snMspsSnoopEnhPortEntry 6 }
snMspsSnoopEnhPortMaxLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The snMspsSnoopEnhPortMaxLimitType must be set before configuring
this object. However the Max-limit is configurable even if the
limit type is 'none', but the limit won't be in effect unless
the limit type is set as 'channels' or 'groups'.
If snMspsSnoopEnhPortMaxLimitType is 'channels',
this limit applies to number of channels that can be joined
on this interface. If snMspsSnoopEnhPortMaxLimitType is 'groups',
this limit applies to number of groups that can be joined on
this interface.
By default, this object will hold a value of zero and will
not limit any IGMP packets as long as the value of
snMspsSnoopEnhPortMaxLimitType is set to 'none'. However, when
snMspsSnoopEnhPortMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the
maximum groups or channels registrations that the system can
support."
DEFVAL { 0 }
::= { snMspsSnoopEnhPortEntry 7 }
snMspsSnoopEnhPortProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received
through this downstream interface. By default, no profiles
are applied on the interface."
DEFVAL { 0 }
::= { snMspsSnoopEnhPortEntry 8 }
snMspsSnoopEnhPortMemberCnt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the total number of groups or channels active on the
interface at the given time."
::= { snMspsSnoopEnhPortEntry 9 }
snMspsSnoopEnhPortMaxBandwidthLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Maximum bandwidth allowed on this port for Multicast.
The snMspsSnoopEnhPortMaxLimitType must be set before configuring
this object. If the snMspsSnoopEnhPortMaxLimitType is 'channels',
this limit applies to the bandwidth of channels going through
the port. It means that both Source as well as Group will be
considered for getting the configured bandwidth of multicast
data. If the snMspsSnoopEnhPortMaxLimitType is 'groups', only
Group address will be considered for getting the configured
bandwidth of multicast data. Whenever a join comes, the
bandwidth corresponding to the joined channel or group, will be
reserved on the port. No new joins will be accepted, if the
reserved bandwidth gets greater that the configured
MaxBandwidth."
::= { snMspsSnoopEnhPortEntry 10 }
snMspsSnoopEnhPortDropReports OBJECT-TYPE
SYNTAX INTEGER { allow(1), drop(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides whether to process or drop the
IGMP reports coming on this port."
DEFVAL { 1 }
::= { snMspsSnoopEnhPortEntry 11 }
snMspsSnoopEnhPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table. "
::= { snMspsSnoopEnhPortEntry 12 }
-- ------------------------------------------------------------------
-- Snoop Proxy Upstream Router Port Table
-- ------------------------------------------------------------------
snMspsSnoopRtrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopRtrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains upstream Router Port-related
configurable information. Router port entry in this table
will be created when the router port is either learnt
dynamically or when the router port is statically
configured through 'snMspsSnoopVlanRtrPortList'.Only static
router ports will be restored during save restore."
::= { snMspsSnooping 7 }
snMspsSnoopRtrPortEntry OBJECT-TYPE
SYNTAX SnMspsSnoopRtrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the upstream router port operating
and configured version of IGMP."
INDEX {
snMspsSnoopRtrPortIndex,
snMspsSnoopRtrPortVlanId,
snMspsSnoopRtrPortInetAddressType
}
::= { snMspsSnoopRtrPortTable 1 }
SnMspsSnoopRtrPortEntry ::= SEQUENCE {
snMspsSnoopRtrPortIndex InterfaceIndex,
snMspsSnoopRtrPortVlanId VlanIndex,
snMspsSnoopRtrPortInetAddressType InetAddressType,
snMspsSnoopRtrPortOperVersion INTEGER,
snMspsSnoopRtrPortCfgOperVersion INTEGER,
snMspsSnoopOlderQuerierInterval Integer32,
snMspsSnoopV3QuerierInterval Integer32
}
snMspsSnoopRtrPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the port which is defined
as an upstream router port."
::= { snMspsSnoopRtrPortEntry 1 }
snMspsSnoopRtrPortVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN Identifier for the upstream router port"
::= { snMspsSnoopRtrPortEntry 2 }
snMspsSnoopRtrPortInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to the global configuration
entry. This indicates whether the row is for IGMP/MLD Snooping"
::= { snMspsSnoopRtrPortEntry 3 }
snMspsSnoopRtrPortOperVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP Proxy
on the upstream router port. Operating version is used by the
Proxy to send consolidated reports on the router ports.
Operating version of the router port will change based on the
the version of query messages received on that port.
Otherwise it will be set to the configured version of IGMP on the
router port.
The default operating mode is IGMP version 3
i.e, V3(3) or MLD version 2 i.e, V2(2)."
DEFVAL { 3 }
::= { snMspsSnoopRtrPortEntry 4 }
snMspsSnoopRtrPortCfgOperVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the configured version of the IGMP Proxy
on the upstream router port.The default operating mode is
IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2). The
'snMspsSnoopRtrPortCfgOperVersion' should be configured on the
basis of the router version present in the router port.The
value configured for static router alone will be stored
and restored."
DEFVAL { 3 }
::= { snMspsSnoopRtrPortEntry 5 }
snMspsSnoopOlderQuerierInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval after which proxy assumes that there are no
v1/v2 routers present on the upstream port.While OlderQuerierTimer is
running, proxy will reply to all queries with consolidated
v1/v2 (oper version) reports.
On time-out, if v2/v3 queriers are not present and if the port
is a dynamically learnt port, then it will be purged.
Else, proxy will reply to all the queries with consolidated
reports with the new oper version (v2/v3).The
value configured for static router alone will be stored
and restored."
DEFVAL { 125 }
::= { snMspsSnoopRtrPortEntry 6 }
snMspsSnoopV3QuerierInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval after which proxy assumes that there are no
IGMPv3 routers present on the upstream port.While V3QuerierTimer is
running, proxy will reply to all queries with consolidated
v1/v2/v3 (oper version) reports.
On time-out, if v1/v2 queriers are not present and if the port
is a dynamically learnt upstream port, then the port will be purged.
Else, proxy will reply to all the queries with consolidated
reports with the new oper version (v1/v2). "
::= { snMspsSnoopRtrPortEntry 7 }
-- IGMP Snooping Switch IP Address
snMspsSnoopSwitchIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will be used as source IP address for IGMP Snooping packets
Default value for this object is 10.0.0.1. Configuring of IP Address 0.0.0.0
is not allowed. Configuration of SwitchIP Address will result in
restarting of snooping instances"
::= { snMspsSnooping 8 }
---------------------------------------------------
-- VLAN Based Static Multicast Forwarding Table
---------------------------------------------------
snMspsSnoopVlanStaticMcastGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsSnoopVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IP based multicast forwarding
information."
::= { snMspsSnooping 9 }
snMspsSnoopVlanStaticMcastGrpEntry OBJECT-TYPE
SYNTAX SnMspsSnoopVlanStaticMcastGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded."
INDEX { snMspsSnoopVlanStaticMcastGrpInstId,
snMspsSnoopVlanStaticMcastGrpVlanId,
snMspsSnoopVlanStaticMcastGrpAddressType,
snMspsSnoopVlanStaticMcastGrpSourceAddress,
snMspsSnoopVlanStaticMcastGrpGroupAddress }
::= { snMspsSnoopVlanStaticMcastGrpTable 1 }
SnMspsSnoopVlanStaticMcastGrpEntry ::= SEQUENCE {
snMspsSnoopVlanStaticMcastGrpInstId Integer32,
snMspsSnoopVlanStaticMcastGrpVlanId Integer32,
snMspsSnoopVlanStaticMcastGrpAddressType InetAddressType,
snMspsSnoopVlanStaticMcastGrpSourceAddress InetAddress,
snMspsSnoopVlanStaticMcastGrpGroupAddress InetAddress,
snMspsSnoopVlanStaticMcastGrpPortList PortList,
snMspsSnoopVlanStaticMcastGrpRowStatus RowStatus
}
snMspsSnoopVlanStaticMcastGrpInstId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the Multicast forwarding entry.
Currently only one instance is supported so it is always 1"
::= { snMspsSnoopVlanStaticMcastGrpEntry 1 }
snMspsSnoopVlanStaticMcastGrpVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { snMspsSnoopVlanStaticMcastGrpEntry 2 }
snMspsSnoopVlanStaticMcastGrpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"InetAddressType pertaining to the Multicast forwarding entry"
::= { snMspsSnoopVlanStaticMcastGrpEntry 3 }
snMspsSnoopVlanStaticMcastGrpSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of the data source that sends
multicast data for this group"
::= { snMspsSnoopVlanStaticMcastGrpEntry 4 }
snMspsSnoopVlanStaticMcastGrpGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP/IPv6 multicast group address"
::= { snMspsSnoopVlanStaticMcastGrpEntry 5 }
snMspsSnoopVlanStaticMcastGrpPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this source and group will be forwarded."
::= { snMspsSnoopVlanStaticMcastGrpEntry 6 }
snMspsSnoopVlanStaticMcastGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { snMspsSnoopVlanStaticMcastGrpEntry 7 }
-- snMspsRmon 1-2 reserved
snMspsRmonEnableStatus OBJECT-TYPE
SYNTAX INTEGER { rmonenabled(1), rmondisabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the rmonenable flag for rmon"
::= { snMspsRmon 3 }
snMspsRmonHwStatsSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the flag for whether HW supports
Etherstatistics or not "
::= { snMspsRmon 4 }
snMspsRmonHwHistorySupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWhistorysupp flag for rmon"
::= { snMspsRmon 5 }
snMspsRmonHwAlarmSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWAlarmsupp flag for rmon"
::= { snMspsRmon 6 }
-- snMspsRmon 7-9 reserved
snMspsRmonHwEventSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWEvent flag for rmon"
::= { snMspsRmon 10 }
snMspsRmon2AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the admin status for rmon2."
DEFVAL { disabled }
::= { snMspsRmon 11 }
snMspsDsmonAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the admin status for dsmon"
DEFVAL { 2 }
::= { snMspsRmon 12 }
snMspsLoopDSystem OBJECT IDENTIFIER ::= { snMspsLoopDetection 1 }
snMspsLoopDPort OBJECT IDENTIFIER ::= { snMspsLoopDetection 2 }
-- --------------------------------------------------------------
-- LoopDSystem Sub-Group
-- --------------------------------------------------------------
snMspsLoopDGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global enable/disable for the loop detection protocol."
DEFVAL { disabled }
::= { snMspsLoopDSystem 1 }
snMspsLoopDVlanEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag to indicate whether the loop detection frames are sent
untagged only or on all VLANs the ports are members of."
DEFVAL { disabled }
::= { snMspsLoopDSystem 2 }
-- --------------------------------------------------------------
-- LoopDPortConfig Sub-Group
-- --------------------------------------------------------------
snMspsLoopDPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsLoopDPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of ports for which simple loop detection occurs on."
::= { snMspsLoopDPort 3 }
snMspsLoopDPortEntry OBJECT-TYPE
SYNTAX SnMspsLoopDPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Loop detection port entry."
INDEX { snMspsLoopDPortIfIndex }
::= { snMspsLoopDPortTable 1 }
SnMspsLoopDPortEntry ::= SEQUENCE {
snMspsLoopDPortIfIndex INTEGER,
snMspsLoopDPortEnable INTEGER,
snMspsLoopDTransmissionInterval INTEGER,
snMspsLoopDPortDetectThreshold INTEGER,
snMspsLoopDPortReactionTimeout INTEGER,
snMspsLoopDPortReactionLocal INTEGER,
snMspsLoopDPortReactionRemote INTEGER,
snMspsLoopDPortReset INTEGER,
snMspsLoopDPortState INTEGER,
snMspsLoopDPortIncomingPortIndex INTEGER,
snMspsLoopDPortIncomingVlanId INTEGER
}
snMspsLoopDPortIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port on which loop detection occurs on."
::= { snMspsLoopDPortEntry 1 }
snMspsLoopDPortEnable OBJECT-TYPE
SYNTAX INTEGER {
loopdPortBlocked(1),
loopdPortForwarder(2),
loopdPortSender(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value indicate whether the port entry is disabled (blocked) for
loop detection, is enabled for forwarding only (sender) or is
enabled for both sending and forwarding (forwarder)."
DEFVAL { loopdPortForwarder }
::= { snMspsLoopDPortEntry 2 }
snMspsLoopDTransmissionInterval OBJECT-TYPE
SYNTAX INTEGER (500..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval (in Milliseconds) for which loop detection
occurs on a certain port or VLAN."
DEFVAL { 1000 }
::= { snMspsLoopDPortEntry 3 }
snMspsLoopDPortDetectThreshold OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Once the number of loop detection packets received on
this port reaches this threshold action will be taken."
DEFVAL { 2 }
::= { snMspsLoopDPortEntry 4 }
snMspsLoopDPortReactionTimeout OBJECT-TYPE
SYNTAX INTEGER (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The timeout (in seconds) the port action will be rolled
back after a loop has been detected.
If timeout is 0 the port action will not be rolled back."
DEFVAL { 0 }
::= { snMspsLoopDPortEntry 5 }
snMspsLoopDPortReactionLocal OBJECT-TYPE
SYNTAX INTEGER {
loopdNoAction(1),
loopdPortDisable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action that will take place after a local loop has
been detected."
DEFVAL { loopdPortDisable }
::= { snMspsLoopDPortEntry 6 }
snMspsLoopDPortReactionRemote OBJECT-TYPE
SYNTAX INTEGER {
loopdNoAction(1),
loopdPortDisable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action that will take place after a remote loop has
been detected."
DEFVAL { loopdPortDisable }
::= { snMspsLoopDPortEntry 7 }
snMspsLoopDPortReset OBJECT-TYPE
SYNTAX INTEGER {
loopdPortNoAction(1),
loopdPortReset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If a port has been disabled due to a detected loop, the
port can be reenabled"
DEFVAL { loopdPortNoAction }
::= { snMspsLoopDPortEntry 8 }
snMspsLoopDPortState OBJECT-TYPE
SYNTAX INTEGER {
loopdDisabled(1),
loopdActive(2),
loopdDetectedLocalLoop(3),
loopdDetectedRemoteLoop(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual loop detection state of the port"
DEFVAL { loopdDisabled }
::= { snMspsLoopDPortEntry 9 }
snMspsLoopDPortIncomingPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port ID of the port packet the last action causing packet
was received."
::= { snMspsLoopDPortEntry 10 }
snMspsLoopDPortIncomingVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN ID the last action causing packet was received."
::= { snMspsLoopDPortEntry 11 }
-- --------------------------------------------------------------
-- END of LoopDPortConfig Sub-Group
-- --------------------------------------------------------------
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapLOOPDStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Device changed LOOPD state."
::= { snMspsTrapPrefix 2251 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsRip2GeneralGroup OBJECT IDENTIFIER ::= { snMspsRip 1 }
snMspsRipRRDGeneralGroup OBJECT IDENTIFIER ::= { snMspsRip 2 }
snMspsRip2Security OBJECT-TYPE
SYNTAX INTEGER {
minimumSecurity(1),
maximumSecurity(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A variable denotes the security level of RIP-2
in the system. The value `minimumSecurity` denotes
that the RIP1 packets will be accepted even when
authentication is in use. The value `maximumSecurity`
denotes that RIP1 packets will be ignored when
authentication is in use"
DEFVAL { maximumSecurity }
::= { snMspsRip2GeneralGroup 1 }
snMspsRip2Peers OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of peers that can be in conversation
with the RIP2 system simultaneously"
::= { snMspsRip2GeneralGroup 2 }
snMspsRip2TrustNBRListEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of neighbor list in the router.
The value 'enabled' denotes that a list of
router's IP address can be configured and
RIP Packets from those router's will be processed
by RIP and packets from other Routers will be dropped.
'Disabled' denotes that RIP Packet from all the
router's will be processed."
DEFVAL { disabled }
::= { snMspsRip2GeneralGroup 3 }
snMspsRip2NumberOfDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIP Packets dropped because of
neighbor list check."
::= { snMspsRip2GeneralGroup 4 }
snMspsRip2SpacingEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether spacing is enabled or not. If spacing
is enabled, generation of periodic update packet
will be split and send."
DEFVAL { disabled }
::= { snMspsRip2GeneralGroup 5 }
snMspsRip2AutoSummaryStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specify the auto-summary status.If
enabled, summary routes are sent in regular updates for
both rip v1 and v2.If split hoizon is enabled, summary
is sent only if atlest one subnet route is learned over
an interface which is different from the interface over
which the update is sent.If all the subnet routes
are learned over the same interface over which updates
are sent, then summary is not send.
With poisson reverse enabled, summary is sent either
with metric 16 or with proper metric according to the
interfaces over which subnet routes were learnt.
If summary is disabled, either individual subnet route
are sent or subnet routes are sent based on the
specfic aggregation configured over the interface."
DEFVAL { enabled }
::= { snMspsRip2GeneralGroup 6 }
-- MIB Objects for Triggered RIP
snMspsRip2RetransTimeoutInt OBJECT-TYPE
SYNTAX Integer32 (5..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout interval to be used to retransmit the Update
request packet or an unacknowledged update response packet."
DEFVAL { 5 }
::= { snMspsRip2GeneralGroup 7 }
snMspsRip2MaxRetransmissions OBJECT-TYPE
SYNTAX Integer32 (10..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of retransmissions of the update request and
update response packets. If no response is received then the routes
via the next hop router are marked unreachable."
DEFVAL { 36 }
::= { snMspsRip2GeneralGroup 8 }
snMspsRip2OverSubscriptionTimeout OBJECT-TYPE
SYNTAX Integer32 (100..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Over subscription timeout value as mentioned in RFC 2091.When a
Circuit DOWN message is received from the circuit manager, this
timer will be started for the specified timeout value."
DEFVAL { 180 }
::= { snMspsRip2GeneralGroup 9 }
snMspsRip2Propagate OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is propagation of static route is enabled or not. If it
is enabled then routing protocols (like RIP) are allowed
to include static routes in the update messages."
DEFVAL { disable }
::= { snMspsRip2GeneralGroup 10 }
snMspsRipTrcFlag OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the tracing in the RIP. A 32 bit integer
is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace."
DEFVAL { 0 }
::= { snMspsRip2GeneralGroup 12 }
snMspsRipAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled (1), disabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of RIP in the router.
The value 'enabled' denotes that the RIP Process
is active; 'disabled' disables it on all inter-faces."
DEFVAL { disabled }
::= { snMspsRip2GeneralGroup 13 }
-- snMspsRip2GeneralGroup 14-20 reserved
--SCALAR_END snMspsRip2GeneralGroup
-- snMspsRip2NBRsTrustListTable
snMspsRip2NBRTrustListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip2NBRTrustListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of Router addresses
from which you can receive RIP Packets"
::= { snMspsRip2GeneralGroup 21 }
snMspsRip2NBRTrustListEntry OBJECT-TYPE
SYNTAX SnMspsRip2NBRTrustListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of snMspsRip2NBRTrustListTable."
INDEX { snMspsRip2TrustNBRIpAddr }
::= { snMspsRip2NBRTrustListTable 1 }
SnMspsRip2NBRTrustListEntry ::=
SEQUENCE {
snMspsRip2TrustNBRIpAddr
IpAddress,
snMspsRip2TrustNBRRowStatus
RowStatus
}
snMspsRip2TrustNBRIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ipaddress of the Router from which this router
can accept RIP Packets"
::= { snMspsRip2NBRTrustListEntry 1 }
snMspsRip2TrustNBRRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { snMspsRip2NBRTrustListEntry 2 }
--snMspsRip2IfConfTable
snMspsRip2IfConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip2IfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of subnets which require separate
configuration in RIP."
::= { snMspsRip2GeneralGroup 22 }
snMspsRip2IfConfEntry OBJECT-TYPE
SYNTAX SnMspsRip2IfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Single Routing Domain in a single Subnet."
INDEX { snMspsRip2IfConfAddress }
::= { snMspsRip2IfConfTable 1 }
SnMspsRip2IfConfEntry ::=
SEQUENCE {
snMspsRip2IfConfAddress
IpAddress,
snMspsRip2IfAdminStat
INTEGER,
snMspsRip2IfConfOperState
INTEGER,
snMspsRip2IfConfUpdateTmr
Integer32,
snMspsRip2IfConfGarbgCollectTmr
Integer32,
snMspsRip2IfConfRouteAgeTmr
Integer32,
snMspsRip2IfSplitHorizonStatus
INTEGER,
snMspsRip2IfConfDefRtInstall
INTEGER,
snMspsRip2IfConfSpacingTmr
Integer32
}
snMspsRip2IfConfAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order."
::= { snMspsRip2IfConfEntry 1 }
snMspsRip2IfAdminStat OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of RIP-2 in the
router. The value 'enabled' denotes that the
RIP2 Process is active throughout the system.
'disabled' disables RIP2 Process in the system.
'passive' denotes that the RIP2 Process runs as
a passive one"
::= { snMspsRip2IfConfEntry 2 }
snMspsRip2IfConfOperState OBJECT-TYPE
SYNTAX INTEGER {
operup (1),
operdown (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Operational Status of the Interface "
DEFVAL { operdown }
::= { snMspsRip2IfConfEntry 3 }
snMspsRip2IfConfUpdateTmr OBJECT-TYPE
SYNTAX Integer32 (10..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval Time Between Updates"
DEFVAL { 30 }
::= { snMspsRip2IfConfEntry 4 }
snMspsRip2IfConfGarbgCollectTmr OBJECT-TYPE
SYNTAX Integer32(120..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Interval before deleting an entry after not hearing
it. Also the advertisements of this entry is set to
INFINITY while sending to others "
DEFVAL { 120 }
::= { snMspsRip2IfConfEntry 5 }
snMspsRip2IfConfRouteAgeTmr OBJECT-TYPE
SYNTAX Integer32 (30..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Time after which the entry is put into garbage collect
interval "
DEFVAL { 180 }
::= { snMspsRip2IfConfEntry 6 }
snMspsRip2IfSplitHorizonStatus OBJECT-TYPE
SYNTAX INTEGER {
splitHorizon(1),
splitHorizonWithPoisRev(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A flag to denote the split horizon operational status
in the system. The value `splitHorizon` denotes that
splitHorizon should be applied in the response packets
that are going out"
DEFVAL { splitHorizonWithPoisRev }
::= { snMspsRip2IfConfEntry 7 }
snMspsRip2IfConfDefRtInstall OBJECT-TYPE
SYNTAX INTEGER {
installDefRt(1),
doNotInstallDefRt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A flag that decides whether the default route received over this
interface should be installed to rip database or not."
DEFVAL { doNotInstallDefRt }
::= { snMspsRip2IfConfEntry 8 }
snMspsRip2IfConfSpacingTmr OBJECT-TYPE
SYNTAX Integer32(0..360)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of route entries are greater than 25 , regular updates
(response packets are sent for every snMspsRip2IfConfUpdateTmr
interval) are sent in multiple packets.
Spacing Provides the interval between the
packets.For value zero spacing will be disabled.Maximum value is 10%
of the snMspsRip2IfConfUpdateTmr object maximum value."
DEFVAL { 0 }
::= { snMspsRip2IfConfEntry 9 }
-- MD5 Authentiacation table for RIP.
snMspsRipMd5AuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRipMd5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MD5 Authentication table for RIP."
::= { snMspsRip2GeneralGroup 23 }
snMspsRipMd5AuthEntry OBJECT-TYPE
SYNTAX SnMspsRipMd5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in to the MD5 Authentiaction table. More than one
entry can be configured for an interface."
INDEX { snMspsRipMd5AuthAddress, snMspsRipMd5AuthKeyId }
::= { snMspsRipMd5AuthTable 1 }
SnMspsRipMd5AuthEntry ::=
SEQUENCE {
snMspsRipMd5AuthAddress IpAddress,
snMspsRipMd5AuthKeyId Integer32,
snMspsRipMd5AuthKey OCTET STRING,
snMspsRipMd5KeyStartTime Integer32,
snMspsRipMd5KeyExpiryTime Integer32,
snMspsRipMd5KeyRowStatus RowStatus
}
snMspsRipMd5AuthAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order. RIP should
have been enabled for this IP address and the rip2IfConfAuthType
should be MD5 for creating this entry."
::= { snMspsRipMd5AuthEntry 1 }
snMspsRipMd5AuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The key ID for this key. This should be unique for the same
snMspsRipMd5AuthAddress. This enables the configuration of more than
one key for an interface."
::= { snMspsRipMd5AuthEntry 2 }
snMspsRipMd5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key.
If a string shorter than 16 octets is supplied, it will be
left- justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."
::= { snMspsRipMd5AuthEntry 3 }
snMspsRipMd5KeyStartTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will start accepting or generating the
packets that have been created with this key.
The start time of the key should be less than the expiry time of
the previous key.
During the overlap interval, the next key will be used in the
generation of the authentication messages.The start time of the first
key should be zero."
::= { snMspsRipMd5AuthEntry 4 }
snMspsRipMd5KeyExpiryTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will stop accepting the packets that have
been created with this key. This time will be indicated (in the
number of seconds) from the start time of the key. If the expiry time
of a key is zero, it means that, the key should be used for the
infinite amount of time. If this key is the last key then that key
will be used for the infinite amount of time or until the new key
is configured."
::= { snMspsRipMd5AuthEntry 5 }
snMspsRipMd5KeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row by which a new entry can be created or
deleted by setting this object to the appropriate value as
mentioned in SMI-v2.If this entry is made active, then no other
entry in the table will be allowed to modify. The entry can be in
deleted from the table."
::= { snMspsRipMd5AuthEntry 6 }
-- snMspsRip2NBRsUnicastListTable
snMspsRip2NBRUnicastListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip2NBRUnicastListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of Router addresses
from which you can receive RIP Packets"
::= { snMspsRip2GeneralGroup 24 }
snMspsRip2NBRUnicastListEntry OBJECT-TYPE
SYNTAX SnMspsRip2NBRUnicastListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of snMspsRip2NBRUnicastListTable."
INDEX { snMspsRip2NBRUnicastIpAddr }
::= { snMspsRip2NBRUnicastListTable 1 }
SnMspsRip2NBRUnicastListEntry ::=
SEQUENCE {
snMspsRip2NBRUnicastIpAddr
IpAddress,
snMspsRip2NBRUnicastNBRRowStatus
RowStatus
}
snMspsRip2NBRUnicastIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ipaddress of the neighbour Router to which unicast
update has to be sent"
::= { snMspsRip2NBRUnicastListEntry 1 }
snMspsRip2NBRUnicastNBRRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { snMspsRip2NBRUnicastListEntry 2 }
--snMspsRip2LocalRoutingTable
snMspsRip2LocalRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip2LocalRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contain Local routing table entries "
::= { snMspsRip2GeneralGroup 25 }
snMspsRip2LocalRouteEntry OBJECT-TYPE
SYNTAX SnMspsRip2LocalRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of routes in local routing table"
INDEX { snMspsRip2DestNet,
snMspsRip2DestMask,
snMspsRip2Tos,
snMspsRip2NextHop
}
::= { snMspsRip2LocalRouteTable 1 }
SnMspsRip2LocalRouteEntry ::=
SEQUENCE {
snMspsRip2DestNet
IpAddress,
snMspsRip2DestMask
IpAddress,
snMspsRip2Tos
Integer32,
snMspsRip2NextHop
IpAddress,
snMspsRip2RtIfIndex
Integer32,
snMspsRip2RtType
Integer32,
snMspsRip2Proto
Integer32,
snMspsRip2ChgTime
Integer32,
snMspsRip2Metric
Integer32,
snMspsRip2RowStatus
Integer32,
snMspsRip2Gateway
IpAddress
}
snMspsRip2DestNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the destination network"
::= { snMspsRip2LocalRouteEntry 1 }
snMspsRip2DestMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Destination mask for the destination network"
::= { snMspsRip2LocalRouteEntry 2 }
snMspsRip2Tos OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value for Rip is always zero"
::= { snMspsRip2LocalRouteEntry 3 }
snMspsRip2NextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The The nexthop address to which any datagrams
destined to the destination,to be
forwarded. (In some special cases)"
::= { snMspsRip2LocalRouteEntry 4 }
snMspsRip2RtIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The interface through which the route is learnt"
::= { snMspsRip2LocalRouteEntry 5 }
snMspsRip2RtType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value for Rip is always zero"
::= { snMspsRip2LocalRouteEntry 6 }
snMspsRip2Proto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol id == RIP (8 - 1)here"
::= { snMspsRip2LocalRouteEntry 7 }
snMspsRip2ChgTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the route is installed"
::= { snMspsRip2LocalRouteEntry 8 }
snMspsRip2Metric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reachability cost for the destination"
::= { snMspsRip2LocalRouteEntry 9 }
snMspsRip2RowStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Row status for perticular route entry"
::= { snMspsRip2LocalRouteEntry 10}
snMspsRip2Gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway address to which any datagrams
destined to the destination, to be forwarded"
::= { snMspsRip2LocalRouteEntry 11}
-- The CIDR group
snMspsRipAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRipAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's
supernet routes.RIP advertises only supernet
routes on the speicified interface. And it
suppresses all routes which are subset of the supernet."
::= { snMspsRip2GeneralGroup 26 }
snMspsRipAggEntry OBJECT-TYPE
SYNTAX SnMspsRipAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the
snMspsRipAggTable representing supertnet route for
the domain."
INDEX { snMspsRipIfIndex, snMspsRipAggAddress, snMspsRipAggAddressMask }
::= { snMspsRipAggTable 1 }
SnMspsRipAggEntry ::=
SEQUENCE {
snMspsRipIfIndex Integer32,
snMspsRipAggAddress IpAddress,
snMspsRipAggAddressMask IpAddress,
snMspsRipAggStatus RowStatus
}
snMspsRipIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index over which the aggregation is configured."
::= { snMspsRipAggEntry 1 }
snMspsRipAggAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aggregated address which when combined with the
corresponding value of snMspsRipAggAddressMask
identifies the supernet route for this domain."
::= { snMspsRipAggEntry 2 }
snMspsRipAggAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aggregated address mask which when combined with
the corresponding value of snMspsRipAggAddress
identifies the supernet route for the domain."
::= { snMspsRipAggEntry 3 }
snMspsRipAggStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row , by which new entries may be
created or old entries deleted from this table"
::= { snMspsRipAggEntry 4 }
-- MIB Definitions for the RIP Protocol to Support Route Redistribution:
-- MIB Definition for RRD Support Starts here
snMspsRipRRDGlobalStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object enables / disables RIP to participate
in Route Redistribution. If set to enabled then RIP will start
advertising the routes learned by other protocols. If set to
disabled then RIP will stop redistribution of routes
but will continue to send updates to the RTM."
DEFVAL { disabled }
::= { snMspsRipRRDGeneralGroup 1 }
snMspsRipRRDSrcProtoMaskEnable OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines the protocols from which the routes
have to be imported to RIP
Bit 1, if set indicates the routes have to be imported from the
local interface.
Bit 2, if set indicates the routes have to be imported from static route.
Bit 12, if set indicates the routes have to be imported from OSPF.
Bit 13, if set indicates the routes have to be imported from BGP."
DEFVAL { 0 }
::= { snMspsRipRRDGeneralGroup 2 }
snMspsRipRRDSrcProtoMaskDisable OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines the protocols from which the importing of
routes should be stopped to RIP
Bit 1, if set indicates the routes have to be imported from the
local interface.
Bit 2, if set indicates the routes have to be imported from static route.
Bit 12, if set indicates the routes have to be imported from OSPF.
Bit 13,if set indicates the routes have to be imported from BGP."
DEFVAL { 0 }
::= { snMspsRipRRDGeneralGroup 3 }
snMspsRipRRDRouteTagType OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
automatic (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tag Type MIB object describes whether Tags
will be automatically generated or will be manually
configured. If tags are manually configured , the
snMspsRipRRDRouteTag MIB has to be set with the Tag
value needed."
DEFVAL { automatic }
::= { snMspsRipRRDGeneralGroup 4 }
snMspsRipRRDRouteTag OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The Route Tag in case the user configures a Manual option for
the tags ."
DEFVAL { 0 }
::= { snMspsRipRRDGeneralGroup 5 }
snMspsRipRRDRouteDefMetric OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default metric to be used for the imported routes from RTM."
DEFVAL { 3 }
::={ snMspsRipRRDGeneralGroup 6 }
snMspsRipRRDRouteMapEnable OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure the
new value."
::={ snMspsRipRRDGeneralGroup 7 }
-- FILTERING OBJECT DEFINITION BEGIN
snMspsRipDistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsRip 3 }
snMspsRipDistInOutRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRipDistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of filtering for route map."
::= { snMspsRipDistInOutRouteMap 1 }
snMspsRipDistInOutRouteMapEntry OBJECT-TYPE
SYNTAX SnMspsRipDistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the filtering configuration of single entry."
INDEX { snMspsRipDistInOutRouteMapName, snMspsRipDistInOutRouteMapType}
::= { snMspsRipDistInOutRouteMapTable 1 }
SnMspsRipDistInOutRouteMapEntry ::= SEQUENCE {
snMspsRipDistInOutRouteMapName DisplayString,
snMspsRipDistInOutRouteMapType Integer32,
snMspsRipDistInOutRouteMapValue Integer32,
snMspsRipDistInOutRouteMapRowStatus RowStatus
}
snMspsRipDistInOutRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route map name."
::= { snMspsRipDistInOutRouteMapEntry 1 }
snMspsRipDistInOutRouteMapType OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out"
::= { snMspsRipDistInOutRouteMapEntry 2 }
snMspsRipDistInOutRouteMapValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance value ( this will be unused for distribute list )"
::= { snMspsRipDistInOutRouteMapEntry 3 }
snMspsRipDistInOutRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRipDistInOutRouteMapEntry 4 }
-- FILTERING OBJECT DEFINITION END
-- PREFERENCE OBJECT DEFINITION BEGIN
snMspsRipPreferenceGroup OBJECT IDENTIFIER ::= { snMspsRip 4 }
snMspsRipPreferenceValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preference value for RIP routes. If the value is set as '0' it will
inturn be mapped to default value"
DEFVAL { 0 }
::= { snMspsRipPreferenceGroup 1 }
-- PREFERENCE OBJECT DEFINITION END
snMspsOspfGeneralGroup OBJECT IDENTIFIER ::= { snMspsOspf 1 }
snMspsOspfRRDGroup OBJECT IDENTIFIER ::= { snMspsOspf 13 }
snMspsOspfRRDGeneralGroup OBJECT IDENTIFIER ::= { snMspsOspfRRDGroup 1}
-- snMspsOspfGeneralGroup 1-4 reserved
snMspsOspfRFC1583Compatibility OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the preference rules, when choosing among multiple AS
external LSAs advertising the same destination.
When set to enabled, the preference rules remain those specified
by RFC1583.
When set to disabled the preference rules are those stated in
RFC2178. Set to enabled by default."
REFERENCE
" OSPF Version 2, Appendix on Demand Routing"
DEFVAL { enabled }
::= {snMspsOspfGeneralGroup 5}
snMspsOspfDefaultPassiveInterface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive."
DEFVAL { false }
::= { snMspsOspfGeneralGroup 6 }
-- snMspsOspf 2-3 reserved
-- OSPF Interface Table
-- The snmspsospfIfTable is an extension to the ospfIfTable
-- and has statistical information associated with each interface.
snMspsOspfIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { snMspsOspf 4 }
snMspsOspfIfEntry OBJECT-TYPE
SYNTAX SnMspsOspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF."
INDEX { snMspsOspfIfIpAddress, snMspsOspfAddressLessIf}
::= { snMspsOspfIfTable 1 }
SnMspsOspfIfEntry ::= SEQUENCE {
snMspsOspfIfIpAddress IpAddress,
snMspsOspfAddressLessIf InterfaceIndex,
snMspsOspfIfOperState INTEGER,
snMspsOspfIfPassive TruthValue,
snMspsOspfIfNbrCount Gauge32,
snMspsOspfIfAdjCount Gauge32,
snMspsOspfIfHelloRcvd Counter32,
snMspsOspfIfHelloTxed Counter32,
snMspsOspfIfHelloDisd Counter32,
snMspsOspfIfDdpRcvd Counter32,
snMspsOspfIfDdpTxed Counter32,
snMspsOspfIfDdpDisd Counter32,
snMspsOspfIfLrqRcvd Counter32,
snMspsOspfIfLrqTxed Counter32,
snMspsOspfIfLrqDisd Counter32,
snMspsOspfIfLsuRcvd Counter32,
snMspsOspfIfLsuTxed Counter32,
snMspsOspfIfLsuDisd Counter32,
snMspsOspfIfLakRcvd Counter32,
snMspsOspfIfLakTxed Counter32,
snMspsOspfIfLakDisd Counter32
}
snMspsOspfIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { snMspsOspfIfEntry 1 }
snMspsOspfAddressLessIf OBJECT-TYPE
SYNTAX InterfaceIndex (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { snMspsOspfIfEntry 2 }
snMspsOspfIfOperState OBJECT-TYPE
SYNTAX INTEGER {
operup (1),
operdown (2),
loopback (3),
unloop (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Operational Status of the Interface."
::= { snMspsOspfIfEntry 3 }
snMspsOspfIfPassive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to make the interface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal"
DEFVAL { false }
::= { snMspsOspfIfEntry 4 }
snMspsOspfIfNbrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Neighbours through
that Interface."
::= { snMspsOspfIfEntry 5 }
snMspsOspfIfAdjCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Adjacencies through
that Interface."
::= { snMspsOspfIfEntry 6 }
snMspsOspfIfHelloRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets received
through that Interface."
::= { snMspsOspfIfEntry 7 }
snMspsOspfIfHelloTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets
transmitted through that Interface."
::= { snMspsOspfIfEntry 8 }
snMspsOspfIfHelloDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets
discarded through that Interface."
::= { snMspsOspfIfEntry 9 }
snMspsOspfIfDdpRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets received
through that Interface."
::= { snMspsOspfIfEntry 10 }
snMspsOspfIfDdpTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets
transmitted through that Interface."
::= { snMspsOspfIfEntry 11 }
snMspsOspfIfDdpDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets discarded
through that Interface."
::= { snMspsOspfIfEntry 12 }
snMspsOspfIfLrqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets received
through that Interface."
::= { snMspsOspfIfEntry 13 }
snMspsOspfIfLrqTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets
transmitted through that Interface."
::= { snMspsOspfIfEntry 14 }
snMspsOspfIfLrqDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets discarded
through that Interface."
::= { snMspsOspfIfEntry 15 }
snMspsOspfIfLsuRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets received
through that Interface."
::= { snMspsOspfIfEntry 16 }
snMspsOspfIfLsuTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets
transmitted through that Interface."
::= { snMspsOspfIfEntry 17 }
snMspsOspfIfLsuDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets discarded
through that Interface."
::= { snMspsOspfIfEntry 18 }
snMspsOspfIfLakRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets received
through that Interface."
::= { snMspsOspfIfEntry 19 }
snMspsOspfIfLakTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets
transmitted through that Interface."
::= { snMspsOspfIfEntry 20 }
snMspsOspfIfLakDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets discarded
on that Interface."
::= { snMspsOspfIfEntry 21 }
-- OSPF Interface MD5 Authentication Table
snMspsOspfIfMD5AuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication."
REFERENCE
"OSPF Version 2, Appendix D.3 Cryptographic Authentication"
::= { snMspsOspf 5 }
snMspsOspfIfMD5AuthEntry OBJECT-TYPE
SYNTAX SnMspsOspfIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface MD5 Authentication Entry describes one
Authentication Key from the viewpoint of OSPF."
INDEX { snMspsOspfIfMD5AuthIpAddress, snMspsOspfIfMD5AuthAddressLessIf,
snMspsOspfIfMD5AuthKeyId}
::= { snMspsOspfIfMD5AuthTable 1 }
SnMspsOspfIfMD5AuthEntry ::= SEQUENCE {
snMspsOspfIfMD5AuthIpAddress IpAddress,
snMspsOspfIfMD5AuthAddressLessIf InterfaceIndex,
snMspsOspfIfMD5AuthKeyId Integer32,
snMspsOspfIfMD5AuthKey OCTET STRING,
snMspsOspfIfMD5AuthKeyStartAccept Integer32,
snMspsOspfIfMD5AuthKeyStartGenerate Integer32,
snMspsOspfIfMD5AuthKeyStopGenerate Integer32,
snMspsOspfIfMD5AuthKeyStopAccept Integer32,
snMspsOspfIfMD5AuthKeyStatus INTEGER
}
snMspsOspfIfMD5AuthIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { snMspsOspfIfMD5AuthEntry 1 }
snMspsOspfIfMD5AuthAddressLessIf OBJECT-TYPE
SYNTAX InterfaceIndex (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { snMspsOspfIfMD5AuthEntry 2 }
snMspsOspfIfMD5AuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object identifies the secret key used to create the
message digest appended to the OSPF packet."
::= { snMspsOspfIfMD5AuthEntry 3 }
snMspsOspfIfMD5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the secret key which is used to create the
message digest appended to the OSPF packet."
::= { snMspsOspfIfMD5AuthEntry 4 }
snMspsOspfIfMD5AuthKeyStartAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will start accepting packets that have
been created with this key. The value shown will be configured
time + system time at which the value is configured."
DEFVAL { 0 }
::= { snMspsOspfIfMD5AuthEntry 5 }
snMspsOspfIfMD5AuthKeyStartGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will start using this key for packets
generation.The value shown will be configured
time + system time at which the value is configured. "
DEFVAL { 0 }
::= { snMspsOspfIfMD5AuthEntry 6 }
snMspsOspfIfMD5AuthKeyStopGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The
value shown will be configured time + system time at which
the value is configured."
DEFVAL { -1 }
::= { snMspsOspfIfMD5AuthEntry 7 }
snMspsOspfIfMD5AuthKeyStopAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime.The value shown will be configured
time + system time at which the value is configured. "
DEFVAL { -1 }
::= { snMspsOspfIfMD5AuthEntry 8 }
snMspsOspfIfMD5AuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Identifies the status of the key.
NOTE:invalid (2) currently not supported"
::= { snMspsOspfIfMD5AuthEntry 9 }
-- OSPF Virtual Interface MD5 Authentication Table
snMspsOspfVirtIfMD5AuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfVirtIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication."
REFERENCE
"OSPF Version 2, Appendix D.3 Cryptographic Authentication"
::= { snMspsOspf 6 }
snMspsOspfVirtIfMD5AuthEntry OBJECT-TYPE
SYNTAX SnMspsOspfVirtIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface MD5 Authentication Entry describes one
Authentication Key from the viewpoint of OSPF."
INDEX {snMspsOspfVirtIfMD5AuthAreaId,snMspsOspfVirtIfMD5AuthNeighbor,
snMspsOspfVirtIfMD5AuthKeyId}
::= { snMspsOspfVirtIfMD5AuthTable 1 }
SnMspsOspfVirtIfMD5AuthEntry ::= SEQUENCE {
snMspsOspfVirtIfMD5AuthAreaId AreaID,
snMspsOspfVirtIfMD5AuthNeighbor RouterID,
snMspsOspfVirtIfMD5AuthKeyId Integer32,
snMspsOspfVirtIfMD5AuthKey OCTET STRING,
snMspsOspfVirtIfMD5AuthKeyStartAccept Integer32,
snMspsOspfVirtIfMD5AuthKeyStartGenerate Integer32,
snMspsOspfVirtIfMD5AuthKeyStopGenerate Integer32,
snMspsOspfVirtIfMD5AuthKeyStopAccept Integer32,
snMspsOspfVirtIfMD5AuthKeyStatus INTEGER
}
snMspsOspfVirtIfMD5AuthAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The Transit Area that the Virtual Link
traverses. By definition, this should not be 0.0.0.0."
::= { snMspsOspfVirtIfMD5AuthEntry 1 }
snMspsOspfVirtIfMD5AuthNeighbor OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The Router ID of the Virtual Neighbor."
::= { snMspsOspfVirtIfMD5AuthEntry 2 }
snMspsOspfVirtIfMD5AuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object identifies the secret key used to create the
message digest appended to the OSPF packet."
::= { snMspsOspfVirtIfMD5AuthEntry 3 }
snMspsOspfVirtIfMD5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the secret key which is used to create the
message digest appended to the OSPF packet."
::= { snMspsOspfVirtIfMD5AuthEntry 4 }
snMspsOspfVirtIfMD5AuthKeyStartAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will start accepting packets that have
been created with this key.The value shown will be configured
time + system time at which the value is configured."
DEFVAL { 0 }
::= { snMspsOspfVirtIfMD5AuthEntry 5 }
snMspsOspfVirtIfMD5AuthKeyStartGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will start using this key for packet
generation.The value shown will be configured
time + system time at which the value is configured."
DEFVAL { 0 }
::= { snMspsOspfVirtIfMD5AuthEntry 6 }
snMspsOspfVirtIfMD5AuthKeyStopGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The value
shown will be configured time + system time at which the value
is configured."
DEFVAL { -1 }
::= { snMspsOspfVirtIfMD5AuthEntry 7 }
snMspsOspfVirtIfMD5AuthKeyStopAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime. The value shown will be configured
time + system time at which the value is configured."
DEFVAL { -1 }
::= { snMspsOspfVirtIfMD5AuthEntry 8 }
snMspsOspfVirtIfMD5AuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Identifies the status of the key.
NOTE: invalid (2) is currently not supported"
::= { snMspsOspfVirtIfMD5AuthEntry 9 }
-- snMspsOspf 7-9 reserved
-- The snMspsOspfAreaAggregateTable is an extension to the
-- ospfAreaAggregateTable to support external Tag for address
-- range configured.
snMspsOspfAreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supports configuration of External Tag for
Type-7 Address ranges configured. "
::= { snMspsOspf 10 }
snMspsOspfAreaAggregateEntry OBJECT-TYPE
SYNTAX SnMspsOspfAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supports configuration of External Tag for
Type-7 Address ranges configured. "
INDEX { snMspsOspfAreaAggregateAreaID, snMspsOspfAreaAggregateLsdbType,
snMspsOspfAreaAggregateNet, snMspsOspfAreaAggregateMask }
::= {snMspsOspfAreaAggregateTable 1 }
SnMspsOspfAreaAggregateEntry ::=
SEQUENCE {
snMspsOspfAreaAggregateAreaID
AreaID,
snMspsOspfAreaAggregateLsdbType
INTEGER,
snMspsOspfAreaAggregateNet
IpAddress,
snMspsOspfAreaAggregateMask
IpAddress,
snMspsOspfAreaAggregateExternalTag
Integer32
}
snMspsOspfAreaAggregateAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area the Address Aggregate is to be found
within."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snMspsOspfAreaAggregateEntry 1 }
snMspsOspfAreaAggregateLsdbType OBJECT-TYPE
SYNTAX INTEGER {
summaryLink (3),
nssaExternalLink (7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { snMspsOspfAreaAggregateEntry 2 }
snMspsOspfAreaAggregateNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the Net or Subnet indicated
by the range."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snMspsOspfAreaAggregateEntry 3 }
snMspsOspfAreaAggregateMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Subnet Mask that pertains to the Net or
Subnet."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snMspsOspfAreaAggregateEntry 4 }
snMspsOspfAreaAggregateExternalTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit field attached to each external route.
This is not used by OSPF protocol itself. It may
be used to communicate information between AS
boundary routers. The precise nature of this information
is outside the scope of OSPF. "
::= { snMspsOspfAreaAggregateEntry 5 }
snMspsOspfRRDStatus OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object enables/disables OSPF to participate in Route
Redistribution. If set to enabled, OSPF will start advertising
the routes learned by other protocols. If set to disabled, OSPF
will stop redistribution of routes. However, OSPF will continue
updating the Common Routing Table using the queue interface."
DEFVAL { disabled }
::= { snMspsOspfRRDGeneralGroup 1 }
snMspsOspfRRDSrcProtoMaskEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit mask of source protocols from which routes are
imported to OSPF.
Bit 1, if set, indicates that local routes are
redistributed into OSPF. (value = 2)
Bit 2, if set, indicates that static routes are
redistributed into OSPF. (value = 4)
Bit 7, if set, indicates that routes from RIP are
redistributed into OSPF. (value = 128)
Bit 13, if set, indicates that routes from BGP are
redistributed into OSPF. (value = 8192)
Other bits are reserved for future use."
DEFVAL { 0 }
::= { snMspsOspfRRDGeneralGroup 2 }
snMspsOspfRRDRouteMapEnable OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure
the new value."
::={ snMspsOspfRRDGeneralGroup 3 }
snMspsOspfRRDRouteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfRRDRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM."
::= { snMspsOspfRRDGroup 3 }
snMspsOspfRRDRouteConfigEntry OBJECT-TYPE
SYNTAX SnMspsOspfRRDRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configuration of single route entry."
INDEX {snMspsOspfRRDRouteDest,snMspsOspfRRDRouteMask}
::= { snMspsOspfRRDRouteConfigTable 1 }
SnMspsOspfRRDRouteConfigEntry ::= SEQUENCE {
snMspsOspfRRDRouteDest IpAddress,
snMspsOspfRRDRouteMask IpAddress,
snMspsOspfRRDRouteMetric BigMetric,
snMspsOspfRRDRouteMetricType INTEGER,
snMspsOspfRRDRouteTagType INTEGER,
snMspsOspfRRDRouteTag Unsigned32,
snMspsOspfRRDRouteStatus RowStatus
}
snMspsOspfRRDRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ip Address of the Destination route."
::= { snMspsOspfRRDRouteConfigEntry 1 }
snMspsOspfRRDRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mask of the Destination route."
::= { snMspsOspfRRDRouteConfigEntry 2 }
snMspsOspfRRDRouteMetric OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric value applied to the route before it is adv. into the
OSPF Domain."
DEFVAL { 10 }
::= { snMspsOspfRRDRouteConfigEntry 3 }
snMspsOspfRRDRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
asexttype1 (1),
asexttype2 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric Type applied to the route before it is adv. into the
OSPF Domain"
DEFVAL { asexttype2 }
::= { snMspsOspfRRDRouteConfigEntry 4 }
snMspsOspfRRDRouteTagType OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
automatic (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the snMspsOspfRRDRouteTag
MIB has to be set with the Tag value needed."
DEFVAL { manual }
::= { snMspsOspfRRDRouteConfigEntry 5 }
snMspsOspfRRDRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Route Tag in case the user configures a Manual option for
the tags."
DEFVAL { 0 }
::= { snMspsOspfRRDRouteConfigEntry 6 }
snMspsOspfRRDRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable displays the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative."
::= { snMspsOspfRRDRouteConfigEntry 7 }
-- snMspsOspf 14 reserved
snMspsOspfLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's Link State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { snMspsOspf 17 }
snMspsOspfLsdbEntry OBJECT-TYPE
SYNTAX SnMspsOspfLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link State Advertisement."
INDEX { snMspsOspfLsdbAreaId, snMspsOspfLsdbType,
snMspsOspfLsdbLsid, snMspsOspfLsdbRouterId }
::= { snMspsOspfLsdbTable 1 }
SnMspsOspfLsdbEntry ::=
SEQUENCE {
snMspsOspfLsdbAreaId
AreaID,
snMspsOspfLsdbType
INTEGER,
snMspsOspfLsdbLsid
IpAddress,
snMspsOspfLsdbRouterId
RouterID,
snMspsOspfLsdbSequence
Integer32,
snMspsOspfLsdbAge
Integer32,
snMspsOspfLsdbChecksum
Integer32,
snMspsOspfLsdbAdvertisement
OCTET STRING
}
snMspsOspfLsdbAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received. In case of external Link, this object is not relevant."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snMspsOspfLsdbEntry 1 }
snMspsOspfLsdbType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5),
multicastLink (6),
nssaExternalLink (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { snMspsOspfLsdbEntry 2 }
snMspsOspfLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { snMspsOspfLsdbEntry 3 }
snMspsOspfLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { snMspsOspfLsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
snMspsOspfLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { snMspsOspfLsdbEntry 5 }
snMspsOspfLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { snMspsOspfLsdbEntry 6 }
snMspsOspfLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { snMspsOspfLsdbEntry 7 }
snMspsOspfLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { snMspsOspfLsdbEntry 8 }
-- FILTERING OBJECT DEFINITION BEGIN
snMspsOspfDistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsOspf 15 }
snMspsOspfDistInOutRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfDistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of filtering for route map."
::= { snMspsOspfDistInOutRouteMap 1 }
snMspsOspfDistInOutRouteMapEntry OBJECT-TYPE
SYNTAX SnMspsOspfDistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the filtering configuration of single entry."
INDEX {snMspsOspfDistInOutRouteMapName, snMspsOspfDistInOutRouteMapType}
::= { snMspsOspfDistInOutRouteMapTable 1 }
SnMspsOspfDistInOutRouteMapEntry ::= SEQUENCE {
snMspsOspfDistInOutRouteMapName DisplayString,
snMspsOspfDistInOutRouteMapType Integer32,
snMspsOspfDistInOutRouteMapValue Integer32,
snMspsOspfDistInOutRouteMapRowStatus RowStatus
}
snMspsOspfDistInOutRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route map name."
::= { snMspsOspfDistInOutRouteMapEntry 1 }
snMspsOspfDistInOutRouteMapType OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out"
::= { snMspsOspfDistInOutRouteMapEntry 3 }
snMspsOspfDistInOutRouteMapValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance value ( this will be unused for distribute list )"
::= { snMspsOspfDistInOutRouteMapEntry 4 }
snMspsOspfDistInOutRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsOspfDistInOutRouteMapEntry 5 }
-- FILTERING OBJECT DEFINITION END
-- PREFERENCE OBJECT DEFINITION BEGIN
snMspsOspfPreferenceGroup OBJECT IDENTIFIER ::= { snMspsOspf 16 }
snMspsOspfPreferenceValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preference value for OSPF routes. Use '0' to set default value"
DEFVAL { 0 }
::= { snMspsOspfPreferenceGroup 1 }
-- PREFERENCE OBJECT DEFINITION END
-- snMspsOspf 18-20 reserved
-- Secondary Address Support OBJECT DEFINITION BEGIN
-- Secondary IP Address Table
snMspsOspfSecIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfSecIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Secondary IP Address information."
::= { snMspsOspf 21 }
snMspsOspfSecIfEntry OBJECT-TYPE
SYNTAX SnMspsOspfSecIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single route."
INDEX {snMspsOspfPrimIpAddr,snMspsOspfPrimAddresslessIf,snMspsOspfSecIpAddr,snMspsOspfSecIpAddrMask}
::= { snMspsOspfSecIfTable 1 }
SnMspsOspfSecIfEntry ::= SEQUENCE {
snMspsOspfPrimIpAddr IpAddress,
snMspsOspfPrimAddresslessIf InterfaceIndex,
snMspsOspfSecIpAddr IpAddress,
snMspsOspfSecIpAddrMask IpAddress,
snMspsOspfSecIfStatus RowStatus
}
snMspsOspfPrimIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Primary Interface IP Address."
::= { snMspsOspfSecIfEntry 1 }
snMspsOspfPrimAddresslessIf OBJECT-TYPE
SYNTAX InterfaceIndex (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Primary Interface Addressless Index."
::= { snMspsOspfSecIfEntry 2 }
snMspsOspfSecIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Secondary Interface IP Address."
::= { snMspsOspfSecIfEntry 3 }
snMspsOspfSecIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Secondary Interface IP Address Mask."
::= { snMspsOspfSecIfEntry 4 }
snMspsOspfSecIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This variable displays the status of the entry.
Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent."
::= { snMspsOspfSecIfEntry 5 }
-- Secondary Address Support OBJECT DEFINITION END
-- Overview Table containing both primary and secondary addresses OBJECT DEFINITION BEGIN
snMspsOspfOverviewIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspfOverviewIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Primary and Secondary IP Address information."
::= { snMspsOspf 25 }
snMspsOspfOverviewIfEntry OBJECT-TYPE
SYNTAX SnMspsOspfOverviewIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single route."
INDEX {snMspsOspfOverviewIfPrimIpAddr,snMspsOspfOverviewIfPrimAddresslessIf,snMspsOspfOverviewIfSecIpAddr,snMspsOspfOverviewIfSecIpAddrMask }
::= { snMspsOspfOverviewIfTable 1 }
SnMspsOspfOverviewIfEntry ::= SEQUENCE {
snMspsOspfOverviewIfPrimIpAddr IpAddress,
snMspsOspfOverviewIfPrimAddresslessIf InterfaceIndex,
snMspsOspfOverviewIfSecIpAddr IpAddress,
snMspsOspfOverviewIfSecIpAddrMask IpAddress,
snMspsOspfOverviewIfStatus Integer32
}
snMspsOspfOverviewIfPrimIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Primary Interface IP Address."
::= { snMspsOspfOverviewIfEntry 1 }
snMspsOspfOverviewIfPrimAddresslessIf OBJECT-TYPE
SYNTAX InterfaceIndex (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Primary Interface Addressless Index."
::= { snMspsOspfOverviewIfEntry 2 }
snMspsOspfOverviewIfSecIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Secondary Interface IP Address."
::= { snMspsOspfOverviewIfEntry 3 }
snMspsOspfOverviewIfSecIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Secondary Interface IP Address Mask."
::= { snMspsOspfOverviewIfEntry 4 }
snMspsOspfOverviewIfStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This variable displays the status of the entry."
::= { snMspsOspfOverviewIfEntry 5 }
-- Secondary Address Support OBJECT DEFINITION END
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapOSPFStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Device changed OSPF route state."
::= { snMspsTrapPrefix 2301 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
-- snMspsRip6 GROUP
snMspsRip6Scalars OBJECT IDENTIFIER ::= { snMspsRip6 1 }
snMspsRip6Tables OBJECT IDENTIFIER ::= { snMspsRip6 2 }
-- rip6Scalars BEGIN
snMspsRip6RoutePreference OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2),
bestmetric(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route prefered for forwarding a packet to a
destination when a statically configured route,
as well as a dynamically learnt route exists for
a particular destination. If the value is set
to bestmetric(3), the route with the best metric
is the one to be used. Note that, this object would
be referred only if both a static route and a
dynamic route exists to the same destination."
DEFVAL { bestmetric }
::= { snMspsRip6Scalars 1 }
snMspsRip6GlobalDebug OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the tracing in RIP6. A 32 bit
integer is used to store the Tracing level.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (including Packet Validation)
BIT 7 - Buffer Trace.
The remaining bits are unused. If a Particular Bit
is set, the corresponding trace would be enabled. For
Example, setting the debug value to 00000001000000000000000000000000
would enable all failure trace prints in RIP6 SubSystem."
::= { snMspsRip6Scalars 2 }
snMspsRip6GlobalInstanceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifes Instance Index, used to
indicate the instance w.r.t which all the
configuration will be performed. Before any
configuration this object has to be set to the
specific Instance Index. This object will be of use
only in case the RIPng module is supporting Multiple
Instance. Ripng comes up with 0 as the default instance."
::= { snMspsRip6Scalars 3 }
snMspsRip6PeerFilter OBJECT-TYPE
SYNTAX INTEGER
{
allow (1),
deny (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to set peer list to allow or deny.
if the flag set to allow, then responses from the
peers in the list can be allowed to be processed.
If the flag is set to deny, the responses from the
peers in the list are not allowed to be processed."
DEFVAL { deny }
::= { snMspsRip6Scalars 4 }
snMspsRip6AdvFilter OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable filtering of routes in the Ripng
responses to be advertised. Setting the flag to
enable(1) will filter the corresponding routing
entries in the response, that are matching with
the AdvFilter list. Setting it to disable(2)
will disable the filter, meaning that all the
entries in the response message are going to be
advertised."
DEFVAL { disable }
::= { snMspsRip6Scalars 5 }
snMspsRip6RRDAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls redistribution of Direct, Static, OSPF and BGP
routes into RIP. If this object is set to enable, then
routes from protocols as specified by
snMspsRip6RRDProtoMaskForEnable will be imported into RIP and
the RIP learnt routes will be distributed to BGP and OSPF.
If this object is set as disable, then the routes learned
from protocols specified by snMspsRip6RRDProtoMaskForEnable
will be removed from RIP and no route will be either
distributed to or imported from OSPF anf BGP. This object
can be set only if snMspsRip6GlobalAdminStatus is up. When the
global admin state changes the snMspsRip6RRDAdminStatus also
changes."
DEFVAL { enable }
::= { snMspsRip6Scalars 6 }
snMspsRip6RRDProtoMaskForEnable OBJECT-TYPE
SYNTAX Integer32
-- See the description
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit mask of source protocols from which routes are
imported to RIP.(LSB corresponds to Bit 0)
Bit 1, if set, indicates that direct routes can be
redistributed into RIP. (value = 2)
Bit 2, if set, indicates that static routes can be
redistributed into RIP. (value = 4)
Bit 5, if set to 1, indicates that routes from OSPF can be
redistributed into RIP. (value = 32)
Bit 6, if set to 2, indicates that BGP routes can be
redistributed into RIP. (value = 64)
Other bits are reserved for future use."
::= { snMspsRip6Scalars 7 }
snMspsRip6RRDSrcProtoMaskForDisable OBJECT-TYPE
SYNTAX Integer32
-- See the description
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit mask of source protocols from which redistribution
to BGP is disabled.(LSB corresponds to Bit 0)
Bit 1, if set, indicates that direct routes cannot be
redistributed into RIP. (value = 2)
Bit 2, if set, indicates that static routes cannot be
redistributed into RIP. (value = 4)
Bit 5, if set to 1, indicates that routes from OSPF cannot
be redistributed into RIP. (value = 32)
Bit 6, if set to 2, indicates that BGP routes cannot be
redistributed into RIP. (value = 64)
Other bits are reserved for future use."
::= { snMspsRip6Scalars 8 }
snMspsRip6RRDRouteDefMetric OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default metric to be used for the imported routes
from RTM6. If 0, then metric value from the RTM6 will
be used."
DEFVAL { 0 }
::= { snMspsRip6Scalars 9 }
snMspsRip6RRDRouteMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure the
new value."
::= { snMspsRip6Scalars 10 }
-- ripngScalars END
-- ripngTable BEGIN
-- IPv6 RIP Instance Table
-- This table is relevent only when RIPng is supporting Multiple
-- Instance Feature.
-- This table contains Instance related parameters.
-- The entry is created or deleted whenever a new Instance is to
-- be created or deleted.
snMspsRip6InstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6InstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains Instance related parameters. This table is
a global table i.e. its not instance specific."
::= { snMspsRip6Tables 1 }
snMspsRip6InstanceEntry OBJECT-TYPE
SYNTAX SnMspsRip6InstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in the IPv6 RIP Instance Table. An entry is
created/deleted in this table when the corresponding
RIP6 instance is created/deleted."
INDEX { snMspsRip6InstanceIndex }
::= { snMspsRip6InstanceTable 1 }
SnMspsRip6InstanceEntry ::=
SEQUENCE {
snMspsRip6InstanceIndex
Integer32,
snMspsRip6InstanceStatus
INTEGER
}
snMspsRip6InstanceIndex OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the RIPng Instance."
::= { snMspsRip6InstanceEntry 1 }
snMspsRip6InstanceStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0), -- Instance Deleted
up(1) -- Instance Created
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the specific Instance whether UP or DOWN."
DEFVAL { 1 }
::= { snMspsRip6InstanceEntry 2 }
-- End of Instance Table
-- IPv6 RIP Instance Interface Map Table
-- This table is relevent only when RIPng is supporting Multiple
-- Instance Feature.
-- This table contains Instance-Interface Mapping parameters.
-- The entry in this table is created whenever an Interface gets
-- attached to an Instance and deleted whenever and Instance get
-- deleted or an Interface gets detached from an Instance.
snMspsRip6InstIfMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6InstIfMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains Instance-If mapping parametersits. This is
a global table ie its not instance specific."
::= { snMspsRip6Tables 2 }
snMspsRip6InstIfMapEntry OBJECT-TYPE
SYNTAX SnMspsRip6InstIfMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in this table is created whenever an Interface gets
attached to an Instance and deleted whenever and Instance get
deleted or an Interface gets detached from an Instance."
INDEX { snMspsRip6IfIndex }
::= { snMspsRip6InstIfMapTable 1 }
SnMspsRip6InstIfMapEntry ::=
SEQUENCE {
snMspsRip6IfIndex
Integer32,
snMspsRip6InstIfMapInstId
Integer32,
snMspsRip6InstIfMapIfAtchStatus
INTEGER
}
snMspsRip6IfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies
the RIPng Interface."
::= { snMspsRip6InstIfMapEntry 1 }
snMspsRip6InstIfMapInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value which uniquely identifies the
RIPng Instance to which a RIPng Interface is
attached. When a row is created in this table
this object is assigned the value of
snMspsRip6GlobalInstanceIndex "
::= { snMspsRip6InstIfMapEntry 2 }
snMspsRip6InstIfMapIfAtchStatus OBJECT-TYPE
SYNTAX INTEGER {
detached(0), -- Interface is detached
-- from Instance
attached(1) -- Interface attached
-- to an Instance
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The attachment status of a RIPng Interface, whether attached
to an instance or not."
::= { snMspsRip6InstIfMapEntry 3 }
-- END of Instance Interface Map Table.
-- IPv6 RIP Interface Table
-- This table contains interface-based RIPng parameters
-- Entries created/deleted in this table when corresponding
-- IPv6 interface is created/deleted.
-- Entries exist in this table even if RIPng protocol is not
-- running on the interface as static routes are also maintained
-- in the RIP routing table.
snMspsRip6RipIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6RipIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing interface-related RIPng parameters."
::= { snMspsRip6Tables 3 }
snMspsRip6RipIfEntry OBJECT-TYPE
SYNTAX SnMspsRip6RipIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in the IPv6 RIP Interface Table. An entry is
created/deleted in this table when corresponding
IPv6 interface is created/deleted."
INDEX { snMspsRip6RipIfIndex }
::= { snMspsRip6RipIfTable 1 }
SnMspsRip6RipIfEntry ::=
SEQUENCE {
snMspsRip6RipIfIndex
Integer32,
snMspsRip6RipIfProfileIndex
Integer32,
snMspsRip6RipIfCost
Integer32,
snMspsRip6RipIfOperStatus
INTEGER,
snMspsRip6RipIfProtocolEnable
INTEGER,
snMspsRip6RipIfInMessages
Counter32,
snMspsRip6RipIfInRequests
Counter32,
snMspsRip6RipIfInResponses
Counter32,
snMspsRip6RipIfUnknownCmds
Counter32,
snMspsRip6RipIfInOtherVer
Counter32,
snMspsRip6RipIfInDiscards
Counter32,
snMspsRip6RipIfOutMessages
Counter32,
snMspsRip6RipIfOutRequests
Counter32,
snMspsRip6RipIfOutResponses
Counter32,
snMspsRip6RipIfOutTrigUpdates
Counter32,
snMspsRip6RipIfDefRouteAdvt
INTEGER
}
snMspsRip6RipIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the IPv6
interface on which this snMspsRip6RipIfEntry exists.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of snMspsRip6IfIndex."
::= { snMspsRip6RipIfEntry 1 }
snMspsRip6RipIfProfileIndex OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index into the RIPng Profile Table which contains the
RIPng parameters for this interface."
DEFVAL { 0 }
::= { snMspsRip6RipIfEntry 2 }
snMspsRip6RipIfCost OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 'cost' associated with this interface. This 'cost'
is added to the metric of all routes learnt over this
interface before they are installed in the routing table."
DEFVAL { 1 }
::= { snMspsRip6RipIfEntry 3 }
snMspsRip6RipIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabledup(1),-- Interface operational
-- and RIPng is enabled on it
enableddown(2),-- Interface not operational
-- but RIPng is enabled on it
disabledup(3),-- Interface operational
-- and RIPng not enabled on it
disableddown(4)-- Interface not operational
-- and RIPng not enabled on it
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of this interface and whether
RIPng is enabled/disabled on it."
::= { snMspsRip6RipIfEntry 4 }
snMspsRip6RipIfProtocolEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1), -- RIPng is Enabled
-- Over this Interface
disable(2) --RIPng is Disabled
--Over this Interface
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIPng is enabled over this Interface or Not."
DEFVAL { disable }
::= { snMspsRip6RipIfEntry 5 }
snMspsRip6RipIfInMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng messages received on this interface. "
::= { snMspsRip6RipIfEntry 6 }
snMspsRip6RipIfInRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng Requests received on this interface. "
::= { snMspsRip6RipIfEntry 7 }
snMspsRip6RipIfInResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng Responses received on this interface. "
::= { snMspsRip6RipIfEntry 8 }
snMspsRip6RipIfUnknownCmds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng packets with unknown command received
on this interface."
::= { snMspsRip6RipIfEntry 9 }
snMspsRip6RipIfInOtherVer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng packets received with other version
on this interface."
::= { snMspsRip6RipIfEntry 10 }
snMspsRip6RipIfInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received RIPng packets that were discarded."
::= { snMspsRip6RipIfEntry 11 }
snMspsRip6RipIfOutMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng messages sent out on this interface."
::= { snMspsRip6RipIfEntry 12 }
snMspsRip6RipIfOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng Requests sent out on this interface."
::= { snMspsRip6RipIfEntry 13 }
snMspsRip6RipIfOutResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RIPng Responses sent out on this interface."
::= { snMspsRip6RipIfEntry 14 }
snMspsRip6RipIfOutTrigUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of triggered updates sent out on this interface."
::= { snMspsRip6RipIfEntry 15 }
snMspsRip6RipIfDefRouteAdvt OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object controls the advertisement of default route
over this interface."
DEFVAL { 0 }
::= { snMspsRip6RipIfEntry 16 }
-- IPv6 RIP Profile Table
-- This table specifies the RIPng related parameters which are
-- referred by interfaces on which RIPng protocol is enabled.
-- Entries are created/deleted from SNMP except for the first profile
-- entry which is autocreated and cannot be deleted.
snMspsRip6RipProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6RipProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing RIPng related configurable parameters
which are maintained as a profile and referred by the
snMspsRip6RipIfTable."
::= { snMspsRip6Tables 4 }
snMspsRip6RipProfileEntry OBJECT-TYPE
SYNTAX SnMspsRip6RipProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in the IPv6 Address Profile Table which contains
RIPng parameters. One or more RIP interfaces refer to this
profile through the object snMspsRip6RipIfProfileIndex in the
snMspsRip6RipIfTable. An entry of this table other than the first
entry is created/deleted from SNMP."
INDEX { snMspsRip6RipProfileIndex }
::= { snMspsRip6RipProfileTable 1 }
SnMspsRip6RipProfileEntry ::=
SEQUENCE {
snMspsRip6RipProfileIndex
Integer32,
snMspsRip6RipProfileStatus
INTEGER,
snMspsRip6RipProfileHorizon
INTEGER,
snMspsRip6RipProfilePeriodicUpdTime
Integer32,
snMspsRip6RipProfileTrigDelayTime
Integer32,
snMspsRip6RipProfileRouteAge
Integer32,
snMspsRip6RipProfileGarbageCollectTime
Integer32
}
snMspsRip6RipProfileIndex OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value identifying the particular IPv6
RIP profile. This is referred by snMspsRip6RipIfProfileIndex of
the IPv6 RIP interface Table."
::= { snMspsRip6RipProfileEntry 1 }
snMspsRip6RipProfileStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that the entry is valid or not. An entry other
than the first entry can be deleted by setting this object
to invalid(2)."
::= { snMspsRip6RipProfileEntry 2 }
snMspsRip6RipProfileHorizon OBJECT-TYPE
SYNTAX INTEGER {
-- indicates that no-horizoning
-- be done on the interface
nohorizon(1) , -- while sending updates
-- indicates that split-
-- horizoning be done on the
-- interface while sending
splithorizon(2), -- updates
-- indicates that poison
-- reverse be done on the
-- interface while sending
poisonreverse(3) -- updates
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of horizoning to be done while sending
routing informations (learnt on that interface) over that
interface. If the configured value is split-horizon(2) then
routes learnt on a interface are not sent over that
interface. If the configured value is poison-reverse(3) then
such routes are sent with a metric of 16."
DEFVAL { poisonreverse }
::= { snMspsRip6RipProfileEntry 3 }
snMspsRip6RipProfilePeriodicUpdTime OBJECT-TYPE
SYNTAX Integer32 (30..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the interval in seconds between the periodic
RIPng updates."
DEFVAL { 30 }
::= { snMspsRip6RipProfileEntry 4 }
snMspsRip6RipProfileTrigDelayTime OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the time interval in seconds by which further
triggered updates are delayed after one triggered update
is sent."
DEFVAL { 5 }
::= { snMspsRip6RipProfileEntry 5 }
snMspsRip6RipProfileRouteAge OBJECT-TYPE
SYNTAX Integer32 (180..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the period in seconds for which a dynamic route
will be kept in the IPv6 RIP routing table without receiving
any updates for the route. After this time interval, the
route will not be valid and will be aged out."
DEFVAL { 180 }
::= { snMspsRip6RipProfileEntry 6 }
snMspsRip6RipProfileGarbageCollectTime OBJECT-TYPE
SYNTAX Integer32 (120..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the period in seconds for which a route which
has aged out is retained in the IPv6 RIP Routing Table. After
this time interval the route is deleted from the IPv6
RIP Routing Table."
DEFVAL { 120 }
::= { snMspsRip6RipProfileEntry 7 }
-- RIPng Routing Table
-- The RIPng routing table contains an entry for each
-- valid IPv6 unicast routes that can be used for packet
-- forwarding. There are no entries for Multicast and
-- Link-Local addresses.
-- This table contains non-RIPng routes learnt via redistribution
-- from IPv6 and dynamic routes (updated by RIPng).
-- Entries are created/deleted to this table through
-- 1. Redistributed from IPv6
-- 2. routes learnt from other RIPng Peers
snMspsRip6RipRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6RipRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains dynamic routes that are learnt
through RIPng protocol as well as non-RIPng routes learnt
via redistribution."
::= { snMspsRip6Tables 5 }
snMspsRip6RipRouteEntry OBJECT-TYPE
SYNTAX SnMspsRip6RipRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the RIPng Routing Table. An entry can be created
by means of the RIPng protocol and redistributed routes from
IPv6. There can be a non-RIPng route as well as a RIPng route
with the same destination and prefix length."
INDEX { snMspsRip6RipRouteDest,
snMspsRip6RipRoutePfxLength,
snMspsRip6RipRouteProtocol,
snMspsRip6RipRouteIfIndex
}
::= { snMspsRip6RipRouteTable 1 }
SnMspsRip6RipRouteEntry ::=
SEQUENCE {
snMspsRip6RipRouteDest
OCTET STRING,
snMspsRip6RipRoutePfxLength
Integer32,
snMspsRip6RipRouteProtocol
INTEGER,
snMspsRip6RipRouteIfIndex
Integer32,
snMspsRip6RipRouteNextHop
OCTET STRING ,
snMspsRip6RipRouteMetric
Integer32,
snMspsRip6RipRouteTag
Integer32,
snMspsRip6RipRouteAge
Integer32
}
snMspsRip6RipRouteDest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this route.
This object will not take a Link-Local or Multicast address
value."
::= { snMspsRip6RipRouteEntry 1 }
snMspsRip6RipRoutePfxLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { snMspsRip6RipRouteEntry 2 }
snMspsRip6RipRouteProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
local(2), -- non-protocol information,
-- e.g., manually configured
-- entries
netmgmt(3), -- static route
ndisc(4), -- e.g., Redirect
-- the following are all
-- dynamic routing protocols
rip(5), -- RIPng
ospf(6), -- Open Shortest Path First
idrp(7) -- InterDomain Routing Protocol
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing mechanism via which this route was
learned. If it has value local(2), it indicates this
route was derived from a configured address prefix."
::= { snMspsRip6RipRouteEntry 3 }
snMspsRip6RipRouteIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of snMspsRip6IfIndex."
::= { snMspsRip6RipRouteEntry 4 }
snMspsRip6RipRouteNextHop OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next hop IPv6 Address for this route. For direct routes
it has the value ::0."
::= { snMspsRip6RipRouteEntry 5 }
snMspsRip6RipRouteMetric OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The routing metric associated with this route. A metric
of 16 indicates infinity implying the route is no longer
valid."
DEFVAL { 1 }
::= { snMspsRip6RipRouteEntry 6 }
snMspsRip6RipRouteTag OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this route is an internal
or external route. Value 0 represent routes are internal
to the routing domain and Value > 0 represent routes
are external to the routing domain."
::= { snMspsRip6RipRouteEntry 7 }
snMspsRip6RipRouteAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last
updated or otherwise determined to be correct. For
statically configured routes and locally derived routes,
this object has value 0."
::= { snMspsRip6RipRouteEntry 8 }
-- SnMspsRip6PeerTable
snMspsRip6RipPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6RipPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the Addresses of those Peers
whose RIPng Responses are to be accepted or denied"
::= { snMspsRip6Tables 6 }
snMspsRip6RipPeerEntry OBJECT-TYPE
SYNTAX SnMspsRip6RipPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Single entity in the snMspsRip6RipPeerTable."
INDEX
{ snMspsRip6RipPeerAddr }
::= { snMspsRip6RipPeerTable 1 }
SnMspsRip6RipPeerEntry ::=
SEQUENCE {
snMspsRip6RipPeerAddr
OCTET STRING,
snMspsRip6RipPeerEntryStatus
INTEGER
}
snMspsRip6RipPeerAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Address of the Peer, from whom Responses are
to be Allowed or Denied"
::= { snMspsRip6RipPeerEntry 1 }
snMspsRip6RipPeerEntryStatus OBJECT-TYPE
SYNTAX INTEGER
{
valid (1),
invalid (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"'valid' indicated presence of the entry.
'invalid' means the entry is unavailable. "
::= { snMspsRip6RipPeerEntry 2}
-- SnMspsRip6RipAdvFilterTable
snMspsRip6RipAdvFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6RipAdvFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the routes which are
NOT to be advertised in the RIPng Responses sent
by the router, if snMspsRip6AdvFilter is enabled"
::= { snMspsRip6Tables 7 }
snMspsRip6RipAdvFilterEntry OBJECT-TYPE
SYNTAX SnMspsRip6RipAdvFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Single entity in the snMspsRip6RipAdvFilterTable"
INDEX
{
snMspsRip6RipAdvFilterAddress
}
::= { snMspsRip6RipAdvFilterTable 1 }
SnMspsRip6RipAdvFilterEntry ::=
SEQUENCE {
snMspsRip6RipAdvFilterAddress
OCTET STRING,
snMspsRip6RipAdvFilterStatus
INTEGER
}
snMspsRip6RipAdvFilterAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The route(s) with this address is NOT to be
advertised to the Peers, if snMspsRip6AdvFilter
is enabled"
::= { snMspsRip6RipAdvFilterEntry 1 }
snMspsRip6RipAdvFilterStatus OBJECT-TYPE
SYNTAX INTEGER
{
valid (1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"'valid' indicated presence of the entry.
'invalid' means the entry is unavailable. "
::= { snMspsRip6RipAdvFilterEntry 2 }
--ripngTable END
-- FILTERING OBJECT DEFINITION BEGIN
snMspsRip6DistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsRip6 3 }
snMspsRip6DistInOutRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRip6DistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of filtering for route map."
::= { snMspsRip6DistInOutRouteMap 1 }
snMspsRip6DistInOutRouteMapEntry OBJECT-TYPE
SYNTAX SnMspsRip6DistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the filtering configuration of single entry."
INDEX {snMspsRip6DistInOutRouteMapName, snMspsRip6DistInOutRouteMapType}
::= { snMspsRip6DistInOutRouteMapTable 1 }
SnMspsRip6DistInOutRouteMapEntry ::= SEQUENCE {
snMspsRip6DistInOutRouteMapName DisplayString,
snMspsRip6DistInOutRouteMapType Integer32,
snMspsRip6DistInOutRouteMapValue Integer32,
snMspsRip6DistInOutRouteMapRowStatus RowStatus
}
snMspsRip6DistInOutRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route map name."
::= { snMspsRip6DistInOutRouteMapEntry 1 }
snMspsRip6DistInOutRouteMapType OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out"
::= { snMspsRip6DistInOutRouteMapEntry 3 }
snMspsRip6DistInOutRouteMapValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance value ( this will be unused for distribute list )"
::= { snMspsRip6DistInOutRouteMapEntry 4 }
snMspsRip6DistInOutRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRip6DistInOutRouteMapEntry 5 }
-- FILTERING OBJECT DEFINITION END
-- PREFERENCE OBJECT DEFINITION BEGIN
snMspsRip6PreferenceGroup OBJECT IDENTIFIER ::= { snMspsRip6 4 }
snMspsRip6PreferenceValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preference value for RIP6 routes. If the value is set as '0',it
will inturn be mapped to default value "
DEFVAL { 120 }
::= { snMspsRip6PreferenceGroup 1 }
-- PREFERENCE OBJECT DEFINITION END
-- ----------------------
-- snmspsospf3.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- OSPFv3 Proprietary MIB.
--
--
-- Copyright (c) 2014 Siemens AG
-- All rights reserved.
-- ----------------------
-- OSPF General Variables
-- These parameters apply globally to the Router's
-- OSPF Process.
snMspsOspf3GeneralGroup OBJECT IDENTIFIER ::= { snMspsOspf3 1 }
snMspsOspf3Notification OBJECT IDENTIFIER ::= { snMspsOspf3 101 }
-- SCALAR_TABLE_BEGIN snMspsOspf3GeneralGroup 7
snMspsOspf3OverFlowState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether router is in overflow state or not."
DEFVAL { false }
::= { snMspsOspf3GeneralGroup 1 }
snMspsOspf3TraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Trace.
0x00000400 -- Packet Hex Dump Trace.
0x00000800 -- Critical Trace.
0x00001000 -- Function Entry Trace.
0x00002000 -- Function Exit Trace.
0x00004000 -- Memory Allocation Success Trace.
0x00008000 -- Memory Allocation Failure Trace.
0x00010000 -- Hello packet Trace.
0x00020000 -- DDP packet Trace.
0x00040000 -- Link State Request Packet Trace.
0x00080000 -- Link State Update Packet Trace.
0x00100000 -- Link State Acknowledge Packet Trace.
0x00200000 -- Interface State Machine Trace.
0x00400000 -- Neighbor State Machine Trace.
0x00800000 -- Routing Table Calculation Trace.
0x01000000 -- RTM Module Trace.
0x02000000 -- Interface Trace.
0x04000000 -- NSSA Trace.
0x08000000 -- Route Aggregation Trace.
0x10000000 -- Configuration Trace.
0x20000000 -- Adjacency formation Trace.
0x40000000 -- Link State Database Trace.
0x80000000 -- Protocol Packet Processing Trace."
DEFVAL { '00000800'H }
::= { snMspsOspf3GeneralGroup 2 }
snMspsOspf3ABRType OBJECT-TYPE
SYNTAX INTEGER {
standardABR (1),
ciscoABR (2),
ibmABR (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Different Types of ABRs supported"
REFERENCE
"RFC-3509 -- Alternative Implementations of OSPF Area Border
Routers"
DEFVAL { standardABR }
::= { snMspsOspf3GeneralGroup 3 }
snMspsOspf3NssaAsbrDefRtTrans OBJECT-TYPE
SYNTAX INTEGER {
enabled (1) ,
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-Bit is set in the generated
Type-7 default Lsa. "
DEFVAL { disabled }
::= { snMspsOspf3GeneralGroup 4 }
snMspsOspf3DefaultPassiveInterface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive."
DEFVAL { false }
::= { snMspsOspf3GeneralGroup 5 }
snMspsOspf3SpfDelay OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The Delay at which routing calculation is carried after a
topology change."
DEFVAL {5}
::= { snMspsOspf3GeneralGroup 6 }
snMspsOspf3SpfHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The minimum time between two consecutive SPF calculations."
DEFVAL {10}
::= { snMspsOspf3GeneralGroup 7 }
snMspsOspf3RTStaggeringInterval OBJECT-TYPE
SYNTAX Integer32 (1000..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPFv3 operations. Refault value of
this object is equal to Hello Interval"
DEFVAL {10000}
::= { snMspsOspf3GeneralGroup 8 }
snMspsOspf3RTStaggeringStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of route table calculation
staggering option"
DEFVAL { enable }
::= { snMspsOspf3GeneralGroup 9 }
-- OSPFv3 Graceful Restart related MIB objects
snMspsOspf3RestartStrictLsaChecking OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if strict LSA checking is enabled for graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL { false }
::= { snMspsOspf3GeneralGroup 10 }
snMspsOspf3HelperSupport OBJECT-TYPE
SYNTAX BITS {
unknown (0),
softwareRestart (1),
swReloadUpgrade (2),
switchToRedundant(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's helper support for OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
snMspsOspf3HelperSupport is indicated by bitmap.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.
By default, all bits are set."
::= { snMspsOspf3GeneralGroup 11 }
snMspsOspf3HelperGraceTimeLimit OBJECT-TYPE
SYNTAX Integer32 (0..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured OSPFv3 graceful restart interval limit in helper side.
Time is configured in seconds. If this object is set to 0, then the helper accepts the restarting router's
grace period received from grace LSA.
This object is persistent and when written the entity
SHOULD save the change to non-volatile storage."
DEFVAL {0}
::= { snMspsOspf3GeneralGroup 12 }
snMspsOspf3RestartAckState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL {enabled}
::= { snMspsOspf3GeneralGroup 13 }
snMspsOspf3GraceLsaRetransmitCount OBJECT-TYPE
SYNTAX Integer32 (0..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retransmissions for unacknowledged GraceLSAs"
DEFVAL {2}
::= { snMspsOspf3GeneralGroup 14 }
snMspsOspf3RestartReason OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
softwareRestart (1),
swReloadUpgrade (2),
switchToRedundant(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's restarter reason code of OSPFv3 graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL {unknown}
::= { snMspsOspf3GeneralGroup 15 }
snMspsOspf3ExtTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to define level of trace required for OSPFv3 GR.
Levels are defined as follows.
0x00000000 -- No Trace Support.
0x00000001 -- Restarting Router Trace.
0x00000002 -- Helper Trace."
::= { snMspsOspf3GeneralGroup 16 }
snMspsOspf3SetTraps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to enable and disable specific
OSPFv3 traps. Currently the following are defined
0x00000000 - Traps are not enabled.
0x00000001 - Restarting router status changes
0x00000002 - Nieghbor Helper status changes
0x00000004 - Virtual Neighbor Helper Status Changes.
0x00000008 - Hot Standby state changes"
::= { snMspsOspf3GeneralGroup 17 }
-- Start of Scalar MIB objects related to OSPFv3 Hot-Standby
snMspsOspf3HotStandbyAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High Availabilty feature enabled or disabled in OSPFv3"
::= { snMspsOspf3GeneralGroup 18 }
snMspsOspf3HotStandbyState OBJECT-TYPE
SYNTAX INTEGER {
init(1),
activeStandbyUp(2),
activeStandbyDown(3),
standby(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal State of the OSPFv3 instance.
init(1) - OSPFv3 instance is up and RM State is undetermined.
activeStandbyUp(2) - The RM state is active & standby is up.
activeStandbyDown(3) - The RM state is active & standby down.
standby(4) - The RM state is standby."
::= { snMspsOspf3GeneralGroup 19 }
snMspsOspf3DynamicBulkUpdStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(1),
inProgress(2),
completed(3),
aborted(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of dynamic bulk update between active and dynamic
OSPFv3 instance.
notStarted(1): Dynamic Bulk Update has not yet been started.
inProgress(2): Dynamic Bulk Update is in Progress.
completed (3): Dynamic Bulk Update is complete.
aborted (4): Dynamic Bulk Update is aborted."
::= { snMspsOspf3GeneralGroup 20 }
snMspsOspf3StandbyHelloSyncCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hello packets synced to standby node."
::= { snMspsOspf3GeneralGroup 21 }
snMspsOspf3StandbyLsaSyncCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of LSAs synced to standby node."
::= { snMspsOspf3GeneralGroup 22 }
-- SCALAR_TABLE_END snMspsOspf3GeneralGroup
-- Siemens OSPF Interface Table
-- The snMspsOspf3IfTable is an extention to the ospfIfTable
-- and has statistical information associted with each interface.
snMspsOspf3IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspf3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Interface Table describes the inter-
faces from the viewpoint of OSPFv3."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters."
::= { snMspsOspf3 2 }
snMspsOspf3IfEntry OBJECT-TYPE
SYNTAX SnMspsOspf3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3."
INDEX { snMspsOspf3IfIndex }
::= { snMspsOspf3IfTable 1 }
SnMspsOspf3IfEntry ::= SEQUENCE {
snMspsOspf3IfIndex InterfaceIndex,
snMspsOspf3IfOperState INTEGER,
snMspsOspf3IfPassive TruthValue,
snMspsOspf3IfNbrCount Gauge32,
snMspsOspf3IfAdjCount Gauge32,
snMspsOspf3IfHelloRcvd Counter32,
snMspsOspf3IfHelloTxed Counter32,
snMspsOspf3IfHelloDisd Counter32,
snMspsOspf3IfDdpRcvd Counter32,
snMspsOspf3IfDdpTxed Counter32,
snMspsOspf3IfDdpDisd Counter32,
snMspsOspf3IfLrqRcvd Counter32,
snMspsOspf3IfLrqTxed Counter32,
snMspsOspf3IfLrqDisd Counter32,
snMspsOspf3IfLsuRcvd Counter32,
snMspsOspf3IfLsuTxed Counter32,
snMspsOspf3IfLsuDisd Counter32,
snMspsOspf3IfLakRcvd Counter32,
snMspsOspf3IfLakTxed Counter32,
snMspsOspf3IfLakDisd Counter32,
snMspsOspf3IfLinkLSASuppression TruthValue
}
snMspsOspf3IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured."
::= { snMspsOspf3IfEntry 1 }
snMspsOspf3IfOperState OBJECT-TYPE
SYNTAX INTEGER {
operup (1),
operdown (2),
loopback (3),
unloop (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Operational Status of the Interface."
::= { snMspsOspf3IfEntry 2 }
snMspsOspf3IfPassive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to make the inteface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal"
DEFVAL { false }
::= { snMspsOspf3IfEntry 3 }
snMspsOspf3IfNbrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Neighbour's through
that Interface."
::= { snMspsOspf3IfEntry 4 }
snMspsOspf3IfAdjCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Adjacencies through
that Interface."
::= { snMspsOspf3IfEntry 5 }
snMspsOspf3IfHelloRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets received
through that Interface."
::= { snMspsOspf3IfEntry 6 }
snMspsOspf3IfHelloTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets
transmitted through that Interface."
::= { snMspsOspf3IfEntry 7 }
snMspsOspf3IfHelloDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets
discarded through that Interface."
::= { snMspsOspf3IfEntry 8 }
snMspsOspf3IfDdpRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets received
through that Interface."
::= { snMspsOspf3IfEntry 9 }
snMspsOspf3IfDdpTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets
transmitted through that Interface."
::= { snMspsOspf3IfEntry 10 }
snMspsOspf3IfDdpDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets discarded
through that Interface."
::= { snMspsOspf3IfEntry 11 }
snMspsOspf3IfLrqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets received
through that Interface."
::= { snMspsOspf3IfEntry 12 }
snMspsOspf3IfLrqTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets
transmitted through that Interface."
::= { snMspsOspf3IfEntry 13 }
snMspsOspf3IfLrqDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets discarded
through that Interface."
::= { snMspsOspf3IfEntry 14 }
snMspsOspf3IfLsuRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets received
through that Interface."
::= { snMspsOspf3IfEntry 15 }
snMspsOspf3IfLsuTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets
transmitted through that Interface."
::= { snMspsOspf3IfEntry 16 }
snMspsOspf3IfLsuDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets discarded
through that Interface."
::= { snMspsOspf3IfEntry 17 }
snMspsOspf3IfLakRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets received
through that Interface."
::= { snMspsOspf3IfEntry 18 }
snMspsOspf3IfLakTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets
transmitted through that Interface."
::= { snMspsOspf3IfEntry 19 }
snMspsOspf3IfLakDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets discarded
on that Interface."
::= { snMspsOspf3IfEntry 20 }
snMspsOspf3IfLinkLSASuppression OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not link LSA origination is
suppressed for networks other than broadcast or NBMA.
The object is set to value true (1) to suppress
the origination."
REFERENCE
"OSPF for IPv6, Appendix C.3, Router Interface
Parameters"
DEFVAL { false }
::= { snMspsOspf3IfEntry 21 }
-- Routing Table
snMspsOspf3RoutingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspf3RoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of routing information."
::= { snMspsOspf3 3 }
snMspsOspf3RoutingEntry OBJECT-TYPE
SYNTAX SnMspsOspf3RoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single route."
INDEX { snMspsOspf3RouteDestType,snMspsOspf3RouteDest,
snMspsOspf3RoutePfxLength,snMspsOspf3RouteNextHopType,
snMspsOspf3RouteNextHop }
::= { snMspsOspf3RoutingTable 1 }
SnMspsOspf3RoutingEntry ::= SEQUENCE {
snMspsOspf3RouteDestType InetAddressType,
snMspsOspf3RouteDest InetAddress,
snMspsOspf3RoutePfxLength InetAddressPrefixLength,
snMspsOspf3RouteNextHopType InetAddressType,
snMspsOspf3RouteNextHop InetAddress,
snMspsOspf3RouteType INTEGER,
snMspsOspf3RouteAreaId AreaID,
snMspsOspf3RouteCost BigMetric,
snMspsOspf3RouteType2Cost BigMetric,
snMspsOspf3RouteInterfaceIndex Integer32
}
snMspsOspf3RouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type of snMspsOspf3RouteDestType. Only
IPv6 addresses are expected."
::= { snMspsOspf3RoutingEntry 1 }
snMspsOspf3RouteDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The Desitnation IPv6 Address of this route."
::= { snMspsOspf3RoutingEntry 2 }
snMspsOspf3RoutePfxLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates the prefix length of the destination Address."
::= { snMspsOspf3RoutingEntry 3 }
snMspsOspf3RouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type ofsnMspsOspf3RouteNextHopType. Only
IPv6 addresses are expected."
::= { snMspsOspf3RoutingEntry 4 }
snMspsOspf3RouteNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Next Hop IPv6 Address for this route. For direct routes it has the
value ::0."
::= { snMspsOspf3RoutingEntry 5 }
snMspsOspf3RouteType OBJECT-TYPE
SYNTAX INTEGER {
intraArea (1),
interArea (2),
type1External (3),
type2External (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the route"
::= { snMspsOspf3RoutingEntry 6 }
snMspsOspf3RouteAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Area ID associated with the route "
::= { snMspsOspf3RoutingEntry 7 }
snMspsOspf3RouteCost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedence."
::= { snMspsOspf3RoutingEntry 8 }
snMspsOspf3RouteType2Cost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the need for conversion of external costs to
internal link state metrics."
::= { snMspsOspf3RoutingEntry 9 }
snMspsOspf3RouteInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Interface Index associated with the route"
::= { snMspsOspf3RoutingEntry 10 }
-- Siemens AsExternalAggregation Table
snMspsOspf3AsExternalAggregationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspf3AsExternalAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated. "
::= { snMspsOspf3 4 }
snMspsOspf3AsExternalAggregationEntry OBJECT-TYPE
SYNTAX SnMspsOspf3AsExternalAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed. "
INDEX { snMspsOspf3AsExternalAggregationNetType, snMspsOspf3AsExternalAggregationNet,
snMspsOspf3AsExternalAggregationPfxLength,
snMspsOspf3AsExternalAggregationAreaId }
::= {snMspsOspf3AsExternalAggregationTable 1 }
SnMspsOspf3AsExternalAggregationEntry ::=
SEQUENCE {
snMspsOspf3AsExternalAggregationNetType
InetAddressType,
snMspsOspf3AsExternalAggregationNet
InetAddress,
snMspsOspf3AsExternalAggregationPfxLength
InetAddressPrefixLength,
snMspsOspf3AsExternalAggregationAreaId
AreaID,
snMspsOspf3AsExternalAggregationEffect
INTEGER,
snMspsOspf3AsExternalAggregationTranslation
INTEGER,
snMspsOspf3AsExternalAggregationStatus
RowStatus
}
snMspsOspf3AsExternalAggregationNetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type of snMspsOspf3AsExternalAggregationNetType. Only
IPv6 addresses are expected."
::= { snMspsOspf3AsExternalAggregationEntry 1 }
snMspsOspf3AsExternalAggregationNet OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address of the Net indicated by
the range. "
::= { snMspsOspf3AsExternalAggregationEntry 2 }
snMspsOspf3AsExternalAggregationPfxLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix length that pertains to the
range. "
::= { snMspsOspf3AsExternalAggregationEntry 3 }
snMspsOspf3AsExternalAggregationAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Refer to description in snMspsOspf3AsExternalAggregationEffect."
::= { snMspsOspf3AsExternalAggregationEntry 4 }
snMspsOspf3AsExternalAggregationEffect OBJECT-TYPE
SYNTAX INTEGER {
advertise (1),
doNotAdvertise (2),
allowAll (3),
denyAll (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Type-5/Type-7 will be aggregated or not
generated for the specified range.
When set to 'allowAll' (3) and associated areaId is 0.0.0.0
aggregated Type-5 are generated for the specified range. In
addition aggregated Type-7 are generated in all attached NSSA
areas, for the specified range.Value allowAll (3) is not valid
for areaId other than 0.0.0.0.
When set to 'denyAll' (4) neither Type-5 nor Type-7 will be
generated for the specified range. Value denyAll (4) is not
valid for areaID other than 0.0.0.0.
When set to 'advertise' (1) and associated areaId is 0.0.0.0,
aggregated Type-5 LSA is generated and all the NSSA LSAs falling
in this address range are flushed out and no aggregated LSA of this
address range is generated for NSSA Areas.Otherwise, if associated
area-id is x.x.x.x (other than 0.0.0.0) aggregated Type-7 LSA is
generated in NSSA area x.x.x.x.
When set to 'doNotAdvertise' (2) and associated area-id is 0.0.0.0,
Type-5 LSA is not generated for the specified range, while all
the NSSA LSA falling in this range is flushed out and aggregated
Type-7 NSSA LSA of this address range is generated in all attached
NSSA areas.Otherwise, if associated area-id is x.x.x.x(other than 0.0.0.0),
Type-7 are not generated in NSSA area x.x.x.x for the specified range. "
DEFVAL { advertise }
::= { snMspsOspf3AsExternalAggregationEntry 5 }
snMspsOspf3AsExternalAggregationTranslation OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This when set to enabled, P Bit is set in
the generated Type-7 LSA. When set disabled
P Bit is clear in the generated Type-7 LSA
for the range. "
DEFVAL { enabled }
::= { snMspsOspf3AsExternalAggregationEntry 6 }
snMspsOspf3AsExternalAggregationStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative."
::= { snMspsOspf3AsExternalAggregationEntry 7 }
-- ABR/ASBR Routes Table
snMspsOspf3BRRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspf3BRRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of routing information."
::= { snMspsOspf3 5 }
snMspsOspf3BRRouteEntry OBJECT-TYPE
SYNTAX SnMspsOspf3BRRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single route."
INDEX {snMspsOspf3BRRouteDest, snMspsOspf3BRRouteNextHopType,
snMspsOspf3BRRouteNextHop,snMspsOspf3BRRouteDestType}
::= { snMspsOspf3BRRouteTable 1 }
SnMspsOspf3BRRouteEntry ::= SEQUENCE {
snMspsOspf3BRRouteDest IpAddress,
snMspsOspf3BRRouteNextHopType InetAddressType,
snMspsOspf3BRRouteNextHop InetAddress,
snMspsOspf3BRRouteDestType INTEGER,
snMspsOspf3BRRouteType INTEGER,
snMspsOspf3BRRouteAreaId AreaID,
snMspsOspf3BRRouteCost BigMetric,
snMspsOspf3BRRouteInterfaceIndex InterfaceIndex
}
snMspsOspf3BRRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Router Id of the destination router.
ABR/ASBR entries will have Router Id as
the destination network Id "
::= { snMspsOspf3BRRouteEntry 1 }
snMspsOspf3BRRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type of snMspsOspf3BRRouteNextHopType. Only
IPv6 addresses are expected."
::= { snMspsOspf3BRRouteEntry 2 }
snMspsOspf3BRRouteNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Next Hop IPv6 Address for this route. For direct
routes it has the value ::0."
::= { snMspsOspf3BRRouteEntry 3 }
snMspsOspf3BRRouteDestType OBJECT-TYPE
SYNTAX INTEGER {
areaBorder (2),
asBoundary (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Type of the route. The route can be ABR route
entry or ASBR route entry "
::= { snMspsOspf3BRRouteEntry 4 }
snMspsOspf3BRRouteType OBJECT-TYPE
SYNTAX INTEGER {
intraArea (1),
interArea (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Type of the route "
::= { snMspsOspf3BRRouteEntry 5 }
snMspsOspf3BRRouteAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Area ID associated with the route "
::= { snMspsOspf3BRRouteEntry 6 }
snMspsOspf3BRRouteCost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cost associated with the route "
::= { snMspsOspf3BRRouteEntry 7 }
snMspsOspf3BRRouteInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Interface Index associated with the route "
::= { snMspsOspf3BRRouteEntry 8 }
-- Redistribution configuration table. Attributes configured for this
-- table will be applied during redistribution.
snMspsOspf3RedistRouteCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspf3RedistRouteCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM."
::= { snMspsOspf3 6 }
snMspsOspf3RedistRouteCfgEntry OBJECT-TYPE
SYNTAX SnMspsOspf3RedistRouteCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configuration of single route entry."
INDEX {snMspsOspf3RedistRouteDestType, snMspsOspf3RedistRouteDest,
snMspsOspf3RedistRoutePfxLength}
::= { snMspsOspf3RedistRouteCfgTable 1 }
SnMspsOspf3RedistRouteCfgEntry ::= SEQUENCE {
snMspsOspf3RedistRouteDestType InetAddressType,
snMspsOspf3RedistRouteDest InetAddress,
snMspsOspf3RedistRoutePfxLength InetAddressPrefixLength,
snMspsOspf3RedistRouteMetric BigMetric,
snMspsOspf3RedistRouteMetricType INTEGER,
snMspsOspf3RedistRouteTagType INTEGER,
snMspsOspf3RedistRouteTag Integer32,
snMspsOspf3RedistRouteStatus RowStatus
}
snMspsOspf3RedistRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type of snMspsOspf3RedistRouteDestType. Only
IPv6 addresses are expected."
::= { snMspsOspf3RedistRouteCfgEntry 1 }
snMspsOspf3RedistRouteDest OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Address of the Destination route."
::= { snMspsOspf3RedistRouteCfgEntry 2 }
snMspsOspf3RedistRoutePfxLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Prefix Length of the Destination route."
::= { snMspsOspf3RedistRouteCfgEntry 3 }
snMspsOspf3RedistRouteMetric OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric value applied to the route before it is adv. into the
OSPFv3 Domain."
DEFVAL { 10 }
::= { snMspsOspf3RedistRouteCfgEntry 4 }
snMspsOspf3RedistRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
type1External (3),
type2External (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric Type applied to the route before it is adv. into the
OSPFv3 Domain"
DEFVAL { type2External }
::= { snMspsOspf3RedistRouteCfgEntry 5 }
snMspsOspf3RedistRouteTagType OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
automatic (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the snMspsOspf3RedistRouteTag
MIB has to be set with the Tag value needed."
DEFVAL { manual }
::= { snMspsOspf3RedistRouteCfgEntry 6 }
snMspsOspf3RedistRouteTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Route Tag in case the user configures a Manual option for
the tags."
DEFVAL { 0 }
::= { snMspsOspf3RedistRouteCfgEntry 7 }
snMspsOspf3RedistRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable dispalys the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative."
::= { snMspsOspf3RedistRouteCfgEntry 8 }
-- RRD OBJECT DEFINITION BEGIN
snMspsOspf3RRDGroup OBJECT IDENTIFIER ::= { snMspsOspf3 7 }
snMspsOspf3RRDGeneralGroup OBJECT IDENTIFIER ::= { snMspsOspf3RRDGroup 1}
-- SCALAR_TABLE_BEGIN snMspsOspf3RRDGeneralGroup 3
snMspsOspf3RRDStatus OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object enables/disables OSPFv3 to participate in Route
Redistribution. If set to enabled, OSPFv3 will start advertising
the routes learned by other protocols. If set to disabled, OSPFv3
will stop redisbution of routes. However, OSPFv3 will continue
updating the Common Routing Table using the queue interface."
DEFVAL { disabled }
::= { snMspsOspf3RRDGeneralGroup 1 }
snMspsOspf3RRDSrcProtoMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit mask of source protocols from which routes are
imported to OSPFv3.
Bit 1, if set, indicates that local routes are
redistributed into OSPFv3. (value = 2)
if reset, indicates that local routes are not
redistributed into OSPFv3.
Bit 2, if set, indicates that static routes are
redistributed into OSPFv3. (value = 4)
if reset, indicates that static routes are not
redistributed into OSPFv3.
Bit 4, if set, indicates that routes from RIP are
redistributed into OSPFv3. (value = 16)
if reset, indicates that routes from RIP are not
redistributed into OSPFv3.
Bit 6, if set, indicates that routes from BGP are
redistributed into OSPFv3. (value = 64)
if reset, indicates that routes from BGP are not
redistributed into OSPFv3.
Other bits are reserved for future use."
DEFVAL { 0 }
::= { snMspsOspf3RRDGeneralGroup 2 }
snMspsOspf3RRDRouteMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps."
::= { snMspsOspf3RRDGeneralGroup 3 }
-- SCALAR_TABLE_END snMspsOspf3RRDGeneralGroup
-- FILTERING OBJECT DEFINITION BEGIN
snMspsOspf3DistInOutRouteMap OBJECT IDENTIFIER ::= { snMspsOspf3 8 }
snMspsOspf3DistInOutRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsOspf3DistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of filtering for route map."
::= { snMspsOspf3DistInOutRouteMap 1 }
snMspsOspf3DistInOutRouteMapEntry OBJECT-TYPE
SYNTAX SnMspsOspf3DistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the filtering configuration of single entry."
INDEX {snMspsOspf3DistInOutRouteMapName, snMspsOspf3DistInOutRouteMapType}
::= { snMspsOspf3DistInOutRouteMapTable 1 }
SnMspsOspf3DistInOutRouteMapEntry ::= SEQUENCE {
snMspsOspf3DistInOutRouteMapName DisplayString,
snMspsOspf3DistInOutRouteMapType Integer32,
snMspsOspf3DistInOutRouteMapValue Integer32,
snMspsOspf3DistInOutRouteMapRowStatus RowStatus
}
snMspsOspf3DistInOutRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route map name."
::= { snMspsOspf3DistInOutRouteMapEntry 1 }
snMspsOspf3DistInOutRouteMapType OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out"
::= { snMspsOspf3DistInOutRouteMapEntry 2 }
snMspsOspf3DistInOutRouteMapValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance value ( this will be unused for distribute list )"
::= { snMspsOspf3DistInOutRouteMapEntry 3 }
snMspsOspf3DistInOutRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsOspf3DistInOutRouteMapEntry 4 }
-- FILTERING OBJECT DEFINITION END
-- PREFERENCE OBJECT DEFINITION BEGIN
snMspsospf3PreferenceGroup OBJECT IDENTIFIER ::= { snMspsOspf3 9 }
snMspsOspf3PreferenceValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preference value for OSPFv3 routes. Use '0' to set default value"
DEFVAL { 0 }
::= { snMspsospf3PreferenceGroup 1 }
-- PREFERENCE OBJECT DEFINITION END
-- Trap Notification types for Graceful restart
snMspsOspf3Traps OBJECT IDENTIFIER ::= { snMspsOspf3Notification 0 }
snMspsOspf3TrapObject OBJECT IDENTIFIER ::= { snMspsOspf3Notification 1 }
-- Trap objects for index variable to be used in notifications
snMspsOspf3TrapNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The local link ID of the link over which the
neighbor can be reached. This is used for Trap"
::= { snMspsOspf3TrapObject 1 }
snMspsOspf3TrapVirtNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.
This is used for Trap"
::= { snMspsOspf3TrapObject 2 }
snMspsOspf3TrapNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System.
This is used for Trap"
::= { snMspsOspf3TrapObject 3 }
snMspsOspf3TrapVirtNbrArea OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Transit Area Identifier. This is used for Trap"
::= { snMspsOspf3TrapObject 4 }
snMspsOspf3TrapBulkUpdAbortReason OBJECT-TYPE
SYNTAX INTEGER {
none(1),
memAllocFailed(2),
sendFailed(3),
processFailed(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for the failure of particular Bulk Update Abort."
::= { snMspsOspf3TrapObject 5 }
-- END
snMspsOspf3RestartStatusChange NOTIFICATION-TYPE
OBJECTS {
ospfv3RouterId, -- The originator of the trap
ospfv3RestartStatus,
ospfv3RestartInterval,
ospfv3RestartExitReason
}
STATUS deprecated
DESCRIPTION
"An ospfv3RestartStatusChange trap signifies that
there has been a change in the graceful restart
state for the router. This trap should be
generated when the router restart status
changes."
::= { snMspsOspf3Traps 1 }
snMspsOspf3NbrRestartHelperStatusChange NOTIFICATION-TYPE
OBJECTS {
ospfv3RouterId, -- The originator of the trap
snMspsOspf3TrapNbrIfIndex,
snMspsOspf3TrapNbrRtrId,
ospfv3NbrRestartHelperStatus,
ospfv3NbrRestartHelperAge,
ospfv3NbrRestartHelperExitReason
}
STATUS deprecated
DESCRIPTION
"An snMspsOspf3NbrRestartHelperStatusChange trap signifies that
there has been a change in the graceful restart
helper state for the neighbor. This trap should be
generated when the neighbor restart helper status
transitions for a neighbor."
::= { snMspsOspf3Traps 2 }
snMspsOspf3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
OBJECTS {
ospfv3RouterId, -- The originator of the trap
snMspsOspf3TrapVirtNbrArea,
snMspsOspf3TrapVirtNbrRtrId,
ospfv3VirtNbrRestartHelperStatus,
ospfv3VirtNbrRestartHelperAge,
ospfv3VirtNbrRestartHelperExitReason
}
STATUS deprecated
DESCRIPTION
"An snMspsOspf3VirtNbrRestartHelperStatusChange trap signifies
that there has been a change in the graceful restart
helper state for the virtual neighbor. This trap should
be generated when the virtual neighbor restart helper
status transitions for a virtual neighbor."
::= { snMspsOspf3Traps 3 }
-- Trap Notification for HA
snMspsOspf3HotStandbyStateChgTrap NOTIFICATION-TYPE
OBJECTS {
ospfv3RouterId, -- The originator of the trap
snMspsOspf3HotStandbyState
}
STATUS deprecated
DESCRIPTION
"A notification is sent to the management entity whenever
there is a state change in the OSPFv3 hotstandby Module."
::= {snMspsOspf3Traps 4}
snMspsOspf3HotStandbyBulkUpdAbortTrap NOTIFICATION-TYPE
OBJECTS {
ospfv3RouterId, -- The originator of the trap
snMspsOspf3DynamicBulkUpdStatus,
snMspsOspf3TrapBulkUpdAbortReason
}
STATUS deprecated
DESCRIPTION
"A notification is sent to the management entity whenever
the bulk update is aborted"
::= {snMspsOspf3Traps 5}
-- End of Trap notifications
-- Textual Convention
-- This Textual Convention enhance the readability of the specification.
CompList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
components, with the first octet specifying components
1 through 8, the second octet specifying components 9
through 16, etc. Within each octet, the most significant
bit represents the lowest numbered component, and the
least significant bit represents the highest numbered
component. Thus, each component is represented by a
single bit within the value of this object. If that bit
has a value of '1', then that component is included in
the set of components; the component is not included
if its bit has a value of '0'."
SYNTAX OCTET STRING
snMspsPimMIBObjects OBJECT IDENTIFIER ::= { snMspsPimMIB 1 }
snMspsPimScalars OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 1 }
snMspsPimTables OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 2 }
snMspsPimTrapsControl OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 3 }
snMspsPimTraps OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 4 }
-- PRIVATE MIB implementation of standard PIM MIB for supporting
-- both PIMv4 and PIMv6
snMspsPimStdScalars OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 5 }
snMspsPimStdTables OBJECT IDENTIFIER ::= { snMspsPimMIBObjects 6 }
-- SCALAR_TABLE_BEGIN
snMspsPimVersionString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the PIM protocol in the router"
::= { snMspsPimScalars 1 }
--
-- Start of mib objects for data rate monitoring by the last hop router
--
snMspsPimSPTGroupThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of data rate for any group when exceeded,
source specific counters are initiated for that particular group
It is based on number of bits per sec.
To initiate SPT switching counter, this threshold MUST be
configured"
DEFVAL { 0 }
::= { snMspsPimScalars 2 }
snMspsPimSPTSourceThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of data rate for any source when exceeded,
switching to Shortest Path Tree is initiated.
It is based on number of bits per sec.
To switch to SPT, this threshold MUST be configured"
DEFVAL { 0 }
::= { snMspsPimScalars 3 }
snMspsPimSPTSwitchingPeriod OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period (in seconds)over which the data rate
is to be monitored for initiating source specific
counting or initiating switch to shortest path tree.
Same period is used for monitoring data rate for
both source and group.
To switch to SPT, this period MUST be configured"
DEFVAL { 0 }
::= { snMspsPimScalars 4 }
--
-- End of mib objects for data rate monitoring by the last hop router
--
--
-- Start of mib objects for monitoring number of register message by the RP
--
snMspsPimSPTRpThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold at which the RP initiates switching to
Source specific shortest path.It is based on number
of registered packets received.
To switch to SPT, this threshold MUST be configured"
DEFVAL { 0 }
::= { snMspsPimScalars 5 }
snMspsPimSPTRpSwitchingPeriod OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period (in seconds) over which RP monitors
register packets for switching to the source specific
shortest path tree.
To switch to SPT, this period MUST be configured"
DEFVAL { 0 }
::= { snMspsPimScalars 6 }
--
-- End of mib objects for monitoring number of register message by the RP
--
--
-- Start of mib objects for Register stop rate limitation
--
snMspsPimRegStopRateLimitingPeriod OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period (in seconds) over which RP monitors number of
register packets after sending the register stop message
to the source of the register message for rate limiting the
sending of register stop message"
DEFVAL { 5 }
::= { snMspsPimScalars 7 }
--
-- End of mib objects for register stop rate limitation
--
snMspsPimMemoryAllocFailCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This counter holds the number of memory allocation failures "
::= { snMspsPimScalars 8 }
snMspsPimGlobalTrace OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Trace Statements in PIM Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Trace. The bits represents the levels as
follows: 0 - Init and Shutdown, 1 - Management, 2 - Data Path,
3 - Control Plane, 4 - packet Dump, 5 - All resources except
buffer, 6 - All Failures, 7 - Buffer. The remaining
bits are unused. The combination of levels are also allowed.
For example if the bits 1 and 2 are set, then the Trace
statements related to management and Data Path will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { snMspsPimScalars 9 }
snMspsPimGlobalDebug OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Debug statements in PIM.
A Four byte integer value is specified for enabling the
level of debugging. Each bit in the four byte integer
variable represents a level of debugging. The combination of
levels are also allowed. The user have to enter the
corresponding integer value for the bit set.
The following values enable Debugging in following different
modules of PIM.
PIM_NBR_MODULE :0x00000001
PIM_GRP_MODULE :0x00000002
PIM_JP_MODULE :0x00000004
PIM_AST_MODULE :0x00000008
PIM_BSR_MODULE :0x00000010
PIM_IO_MODULE :0x00000020
PIM_PMBR_MODULE :0x00000040
PIM_MRT_MODULE :0x00000080
PIM_MDH_MODULE :0x00000100
PIM_MGMT_MODULE :0x00000200
PIMDM_DBG_SRM_MODULE :0x00000400
PIM_HA_MODULE :0x00000800
PIM_DF_MODULE :0x00001000
PIM_BMRT_MODULE :0x00002000
PIM_NPAPI_MODULE :0x00004000
PIM_INIT_SHUT_MODULE :0x00008000
PIM_OSRESOURCE_MODULE :0x00010000
PIM_BUFFER_MODULE :0x00020000
PIM_ENTRY_MODULE :0x00040000
PIM_EXIT_MODULE :0x00080000
PIM_ALL_MODULES :0x000fffff
PIM_MAX_INT4 :0x7fffffff
PIM_TRACE_DIS_FLAG :0x80000000
"
DEFVAL { 0 }
::= { snMspsPimScalars 10 }
snMspsPimPmbrStatus OBJECT-TYPE
SYNTAX INTEGER { disable (1),enable (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The border bit which identifies the router as a border router"
DEFVAL { 1 }
::= { snMspsPimScalars 11 }
snMspsPimRouterMode OBJECT-TYPE
SYNTAX INTEGER { ssmonly (1), smssm (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mode of the Pim-SM router (ssm_only or sm_ssm )"
DEFVAL { 2 }
::= { snMspsPimScalars 12 }
snMspsPimStaticRpEnabled OBJECT-TYPE
SYNTAX INTEGER { disable (0),enable (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag which indicating that static configuration of RP is
available"
DEFVAL { 0 }
::= { snMspsPimScalars 13 }
snMspsPimIpStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled status of IPv4 Multicast Routing by PIM on this router."
::= { snMspsPimScalars 14 }
snMspsPimIpv6Status OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled status of IPv6 Multicast Routing by PIM on this router."
::= { snMspsPimScalars 15 }
--
-- start of Scalar MIB Objects related to State Refresh Module.
--
snMspsPimSRProcessingStatus OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The value indicates the whether to process and forward
the state Refresh message"
DEFVAL { 1 }
::= { snMspsPimScalars 16 }
snMspsPimRefreshInterval OBJECT-TYPE
SYNTAX Integer32 (-1 | 4..100)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval between successive State Refresh messages sent
by an Originator. This timer period is called the
RefreshInterval in the PIM-DM specification. This object is
used only by PIM-DM. Minus one indicates that Generation of
State Refresh Message is disabled"
REFERENCE "RFC 3973 section 4.8"
DEFVAL { -1 }
::= { snMspsPimScalars 17 }
snMspsPimSourceActiveInterval OBJECT-TYPE
SYNTAX Unsigned32 (120..210)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Period of time after receiving a multicast message
a Originator router (Directly connected to source)
will continue to send State Refresh Message"
DEFVAL { 210 }
::= { snMspsPimScalars 18 }
-- End of Scalar MIB objects related to State Refresh Module
--
-- Start of Scalar MIB objects related to PIM Hot-Standby Module
--
snMspsPimHAAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" High Availability feature enabled or disabled in PIM."
DEFVAL { 0 }
::= { snMspsPimScalars 19 }
snMspsPimHAState OBJECT-TYPE
SYNTAX INTEGER {
init(1),
activeStandbyUp(2),
activeStandbyDown(3),
standby(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal State of the PIM instance.
init(1) implies that the PIM instance is up, but is unaware
of the status of its peer.
activeStandbyUp(2) implies that the current PIM instance is up
and functioning as active node and its peer is functioning as the
standby.
activeStandbyDown(3) implies that the current PIM instance is up
and functioning as active node but its peer is down/not
functioning.
standby(4) implies that current PIM instance is the standby
Instance. "
DEFVAL { 1 }
::= { snMspsPimScalars 20}
snMspsPimHADynamicBulkUpdStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(1),
inProgress(2),
completed(3),
aborted(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of dynamic bulk update between active and
dynamic PIM instance.
notStarted(1): Dynamic Bulk Update has not yet been started.
inProgress(2): Dynamic Bulk Update is in Progress.
completed (3): Dynamic Bulk Update is complete.
aborted (4): dynamic Bulk Update is aborted."
DEFVAL { 1 }
::= { snMspsPimScalars 21}
snMspsPimHAForwardingTblEntryCnt OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number entries in the shadow table of active
PIM instance."
::= { snMspsPimScalars 22}
--
-- End of Scalar MIB objects related to PIM Hot-Standby Module
--
--
-- Start of Scalar MIB objects related to PIM RPF-Vector feature
--
snMspsPimIpRpfVector OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of IPv4 Multicast RPF Vector Feature."
DEFVAL { 2 }
::= { snMspsPimScalars 23 }
--
-- End of Scalar MIB objects related to PIM RPF Vector feature
--
--
-- Start of Scalar MIB objects related to Bidir-PIM feature
--
snMspsPimIpBidirPIMStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of Bidir-PIM Feature.Enabling/Disabling this feature
is applicable for both PIMv4 and PIMv6"
DEFVAL { 2 }
::= { snMspsPimScalars 24 }
snMspsPimIpBidirOfferInterval OBJECT-TYPE
SYNTAX Integer32 (1..20000000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval between the DF election Offer messages to be sent."
DEFVAL { 100 }
::= { snMspsPimScalars 25 }
snMspsPimIpBidirOfferLimit OBJECT-TYPE
SYNTAX Integer32 (3..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of unanswered offers before the router changes as the
designated forwarder (DF)"
DEFVAL { 3 }
::= { snMspsPimScalars 26 }
--
-- End of Scalar MIB objects related to Bidir-PIM feature
--
--
-- SCALAR_TABLE_END
--
--
-- The PIM Interface Table
--
snMspsPimInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table."
::= { snMspsPimTables 1 }
snMspsPimInterfaceEntry OBJECT-TYPE
SYNTAX SnMspsPimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimInterfaceTable."
INDEX { snMspsPimInterfaceIfIndex , snMspsPimInterfaceAddrType}
::= { snMspsPimInterfaceTable 1 }
SnMspsPimInterfaceEntry ::= SEQUENCE {
snMspsPimInterfaceIfIndex Integer32,
snMspsPimInterfaceAddrType InetAddressType,
snMspsPimInterfaceCompId Integer32,
snMspsPimInterfaceDRPriority Unsigned32,
snMspsPimInterfaceHelloHoldTime Integer32,
snMspsPimInterfaceLanPruneDelayPresent INTEGER,
snMspsPimInterfaceLanDelay Integer32,
snMspsPimInterfaceOverrideInterval Integer32,
snMspsPimInterfaceGenerationId Integer32,
snMspsPimInterfaceSuppressionInterval Integer32,
snMspsPimInterfaceAdminStatus Integer32,
snMspsPimInterfaceBorderBit Integer32,
snMspsPimInterfaceGraftRetryInterval Unsigned32,
snMspsPimInterfaceSRPriorityEnabled TruthValue,
snMspsPimInterfaceTtl Integer32,
snMspsPimInterfaceProtocol IANAipMRouteProtocol,
snMspsPimInterfaceRateLimit Integer32,
snMspsPimInterfaceInMcastOctets Counter32,
snMspsPimInterfaceOutMcastOctets Counter32,
snMspsPimInterfaceHCInMcastOctets Counter64,
snMspsPimInterfaceHCOutMcastOctets Counter64,
snMspsPimInterfaceCompIdList CompList,
snMspsPimInterfaceDFOfferSentPkts Counter32,
snMspsPimInterfaceDFOfferRcvdPkts Counter32,
snMspsPimInterfaceDFWinnerSentPkts Counter32,
snMspsPimInterfaceDFWinnerRcvdPkts Counter32,
snMspsPimInterfaceDFBackoffSentPkts Counter32,
snMspsPimInterfaceDFBackoffRcvdPkts Counter32,
snMspsPimInterfaceDFPassSentPkts Counter32,
snMspsPimInterfaceDFPassRcvdPkts Counter32,
snMspsPimInterfaceCKSumErrorPkts Counter32,
snMspsPimInterfaceInvalidTypePkts Counter32,
snMspsPimInterfaceInvalidDFSubTypePkts Counter32,
snMspsPimInterfaceAuthFailPkts Counter32,
snMspsPimInterfaceFromNonNbrsPkts Counter32,
snMspsPimInterfaceJPRcvdOnRPFPkts Counter32,
snMspsPimInterfaceJPRcvdNoRPPkts Counter32,
snMspsPimInterfaceJPRcvdWrongRPPkts Counter32,
snMspsPimInterfaceJoinSSMGrpPkts Counter32,
snMspsPimInterfaceJoinBidirGrpPkts Counter32,
snMspsPimInterfaceHelloRcvdPkts Counter32,
snMspsPimInterfaceHelloSentPkts Counter32,
snMspsPimInterfaceJPRcvdPkts Counter32,
snMspsPimInterfaceJPSentPkts Counter32,
snMspsPimInterfaceAssertRcvdPkts Counter32,
snMspsPimInterfaceAssertSentPkts Counter32,
snMspsPimInterfaceGraftRcvdPkts Counter32,
snMspsPimInterfaceGraftSentPkts Counter32,
snMspsPimInterfaceGraftAckRcvdPkts Counter32,
snMspsPimInterfaceGraftAckSentPkts Counter32,
snMspsPimInterfacePackLenErrorPkts Counter32,
snMspsPimInterfaceBadVersionPkts Counter32,
snMspsPimInterfacePktsfromSelf Counter32,
snMspsPimInterfaceExtBorderBit Integer32,
snMspsPimInterfaceJoinSSMBadPkts Counter32
}
snMspsPimInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of this PIM interface."
::= { snMspsPimInterfaceEntry 1 }
snMspsPimInterfaceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type of the PIM Interface for which this entry
contains information."
::= { snMspsPimInterfaceEntry 2 }
snMspsPimInterfaceCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is the component Id of the component to which the
interface belongs to"
DEFVAL { 1 }
::= { snMspsPimInterfaceEntry 3 }
snMspsPimInterfaceDRPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DR priority value configured for Hello message for that
router per interface"
DEFVAL { 1 }
::= {snMspsPimInterfaceEntry 4 }
snMspsPimInterfaceHelloHoldTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold time configured for the Hello message for that
router per interface"
::= { snMspsPimInterfaceEntry 5 }
snMspsPimInterfaceLanPruneDelayPresent OBJECT-TYPE
SYNTAX INTEGER {disable (0), enable (1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LanPruneDelayPresent bit configured for the router per
interface"
DEFVAL { 0 }
::= { snMspsPimInterfaceEntry 6 }
snMspsPimInterfaceLanDelay OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LanPruneDelayPresent bit configured for the router per
interface"
DEFVAL { 0 }
::= { snMspsPimInterfaceEntry 7 }
snMspsPimInterfaceOverrideInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Override Interval configured for the router per interface"
DEFVAL { 0 }
::= { snMspsPimInterfaceEntry 8}
snMspsPimInterfaceGenerationId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Generation identifier of the router. This is used by
neighbour routers to quickly detect router reboot and
synchronize RP-Set information and forwarding states by triggering
Bootstrap and Join/Prune messages to the rebooted router"
::= { snMspsPimInterfaceEntry 9 }
snMspsPimInterfaceSuppressionInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface suppression period "
::= { snMspsPimInterfaceEntry 10 }
snMspsPimInterfaceAdminStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface Administrative Status "
::= { snMspsPimInterfaceEntry 11 }
snMspsPimInterfaceBorderBit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates this interface is border interface or not,
1-- border interface, 0(default value)-- Normal interface."
::= { snMspsPimInterfaceEntry 12 }
snMspsPimInterfaceGraftRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the
PIM-DM specification. This object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.8"
DEFVAL { 3 }
::= { snMspsPimInterfaceEntry 13 }
snMspsPimInterfaceSRPriorityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if all routers on this interface are
using the State Refresh option. This object is used only by
PIM-DM."
::= { snMspsPimInterfaceEntry 14 }
snMspsPimInterfaceTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the
interface."
::= { snMspsPimInterfaceEntry 15 }
snMspsPimInterfaceProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing protocol running on this interface."
::= { snMspsPimInterfaceEntry 16}
snMspsPimInterfaceRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done."
DEFVAL { 0 }
::= { snMspsPimInterfaceEntry 17}
snMspsPimInterfaceInMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is similar to ifInOctets in the Interfaces MIB, except that
only multicast packets are counted."
::= { snMspsPimInterfaceEntry 18}
snMspsPimInterfaceOutMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface."
::= { snMspsPimInterfaceEntry 19}
snMspsPimInterfaceHCInMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is a 64-bit version of snMspsPimInterfaceInMcaestOctets. It
is similar to ifHCInOctets in the Interfaces MIB, except
that only multicast packets are counted. "
::= { snMspsPimInterfaceEntry 20}
snMspsPimInterfaceHCOutMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface. This object is a 64-bit version of
snMspsPimInterfaceOutMcastOctets."
::= { snMspsPimInterfaceEntry 21}
snMspsPimInterfaceCompIdList OBJECT-TYPE
SYNTAX CompList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is the component Id List of the components which are
associated with this interface"
::= { snMspsPimInterfaceEntry 22 }
snMspsPimInterfaceDFOfferSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF Offer packets sent by an interface"
::= { snMspsPimInterfaceEntry 23 }
snMspsPimInterfaceDFOfferRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF Offer packets received on an interface"
::= { snMspsPimInterfaceEntry 24 }
snMspsPimInterfaceDFWinnerSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF winner packets sent by an interface"
::= { snMspsPimInterfaceEntry 25 }
snMspsPimInterfaceDFWinnerRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF winner packets received on an interface"
::= { snMspsPimInterfaceEntry 26 }
snMspsPimInterfaceDFBackoffSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF Backoff packets sent per interface"
::= { snMspsPimInterfaceEntry 27 }
snMspsPimInterfaceDFBackoffRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF Backoff packets Received per interface"
::= { snMspsPimInterfaceEntry 28 }
snMspsPimInterfaceDFPassSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF pass packets sent per interface"
::= { snMspsPimInterfaceEntry 29 }
snMspsPimInterfaceDFPassRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of DF pass packets received on an interface"
::= { snMspsPimInterfaceEntry 30 }
snMspsPimInterfaceCKSumErrorPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets received on an interface with incorrect checksum"
::= { snMspsPimInterfaceEntry 31 }
snMspsPimInterfaceInvalidTypePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets received on an interface with incorrect PIM packet type"
::= { snMspsPimInterfaceEntry 32 }
snMspsPimInterfaceInvalidDFSubTypePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets received on an interface with incorrect DF subtype"
::= { snMspsPimInterfaceEntry 33 }
snMspsPimInterfaceAuthFailPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets dropped due to Authentication Failure"
::= { snMspsPimInterfaceEntry 34 }
snMspsPimInterfaceFromNonNbrsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of PIM control packets received on an interface from non-neighbors"
::= { snMspsPimInterfaceEntry 35 }
snMspsPimInterfaceJPRcvdOnRPFPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of Join and Prune packets received on an RPF interface."
::= { snMspsPimInterfaceEntry 36 }
snMspsPimInterfaceJPRcvdNoRPPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of (*,G) join and prune packets for which there is no RP in that specified group(G)"
::= { snMspsPimInterfaceEntry 37 }
snMspsPimInterfaceJPRcvdWrongRPPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of (*,G) join and prune packets with wrong RP information in that group(G)"
::= { snMspsPimInterfaceEntry 38 }
snMspsPimInterfaceJoinSSMGrpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of (S,G) join packets received on an interface whose group range is in SSM Group range"
::= { snMspsPimInterfaceEntry 39 }
snMspsPimInterfaceJoinBidirGrpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of (*,G) or (S,G) join packets received on an interface whose group is configured as Bidir group"
::= { snMspsPimInterfaceEntry 40 }
snMspsPimInterfaceHelloRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of hello packtes received on an interface"
::= { snMspsPimInterfaceEntry 41 }
snMspsPimInterfaceHelloSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of hello packets sent by an interface"
::= { snMspsPimInterfaceEntry 42 }
snMspsPimInterfaceJPRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of join/prune packets received on an interface"
::= { snMspsPimInterfaceEntry 43 }
snMspsPimInterfaceJPSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of join/prune packets sent by an interface"
::= { snMspsPimInterfaceEntry 44 }
snMspsPimInterfaceAssertRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of assert packets received on an interface"
::= { snMspsPimInterfaceEntry 45 }
snMspsPimInterfaceAssertSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of assert packets sent by an interfcace"
::= { snMspsPimInterfaceEntry 46 }
snMspsPimInterfaceGraftRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of graft packets received on an interface"
::= { snMspsPimInterfaceEntry 47 }
snMspsPimInterfaceGraftSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of graft packets sent by an interface"
::= {snMspsPimInterfaceEntry 48 }
snMspsPimInterfaceGraftAckRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of graft ACK packets received on an interface"
::= { snMspsPimInterfaceEntry 49 }
snMspsPimInterfaceGraftAckSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of graft ACK packets sent by an interface"
::= { snMspsPimInterfaceEntry 50 }
snMspsPimInterfacePackLenErrorPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets with packet length error"
::= { snMspsPimInterfaceEntry 51 }
snMspsPimInterfaceBadVersionPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of bad version packets"
::= { snMspsPimInterfaceEntry 53 }
snMspsPimInterfacePktsfromSelf OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets sent from the interface"
::= { snMspsPimInterfaceEntry 54 }
snMspsPimInterfaceExtBorderBit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object displays the interface connected to a non-PIM Domain"
::= { snMspsPimInterfaceEntry 55 }
snMspsPimInterfaceJoinSSMBadPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of join packets discarded on an interface whose group range is in SSM Group range"
::= { snMspsPimInterfaceEntry 56 }
--
-- The PIM Neighbor Table
--
snMspsPimNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimNeighborEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing the router's PIM neighbors.
This table has been superseded by snMspsPimNeighborExtTable.
This table may be used as long as two neighbors on different
interfaces do not have the same IPv6 link-local address."
::= { snMspsPimTables 2 }
snMspsPimNeighborEntry OBJECT-TYPE
SYNTAX SnMspsPimNeighborEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) in the snMspsPimNeighborTable."
INDEX { snMspsPimNeighborCompId, snMspsPimNeighborAddrType,
snMspsPimNeighborAddress }
::= { snMspsPimNeighborTable 1 }
SnMspsPimNeighborEntry ::= SEQUENCE {
snMspsPimNeighborCompId Integer32,
snMspsPimNeighborAddrType InetAddressType,
snMspsPimNeighborAddress InetAddress,
snMspsPimNeighborIfIndex Integer32,
snMspsPimNeighborUpTime TimeTicks,
snMspsPimNeighborExpiryTime TimeTicks,
snMspsPimNeighborGenerationId Integer32,
snMspsPimNeighborLanDelay Integer32,
snMspsPimNeighborDRPriority Unsigned32,
snMspsPimNeighborOverrideInterval Integer32,
snMspsPimNeighborSRCapable TruthValue,
snMspsPimNeighborRPFCapable TruthValue,
snMspsPimNeighborBidirCapable TruthValue
}
snMspsPimNeighborCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
" The component Id of this neighbor table "
::= { snMspsPimNeighborEntry 1 }
snMspsPimNeighborAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The address Type of the PIM neighbor for which this entry
contains information."
::= { snMspsPimNeighborEntry 2 }
snMspsPimNeighborAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP address of the PIM neighbor for which this entry
contains information."
::= { snMspsPimNeighborEntry 3 }
snMspsPimNeighborIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM neighbor."
::= { snMspsPimNeighborEntry 4 }
snMspsPimNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time since this PIM neighbor (last) became a neighbor
of the local router."
::= { snMspsPimNeighborEntry 5 }
snMspsPimNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum time remaining before this PIM neighbor will be
aged out."
::= { snMspsPimNeighborEntry 6 }
snMspsPimNeighborGenerationId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Generation identifier of the router. This is used by
neighbour routers to quickly detect router reboot and synchronize
RP-Set information and forwarding states by triggering Bootstrap
and Join/Prune messages to the rebooted router"
::= { snMspsPimNeighborEntry 7 }
snMspsPimNeighborLanDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The LanDelay configured for this PIM neighbor"
::= { snMspsPimNeighborEntry 8 }
snMspsPimNeighborDRPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The DR priority value configured for this PIM neighbor"
::= { snMspsPimNeighborEntry 9 }
snMspsPimNeighborOverrideInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Override Interval configured for this PIM neighbor"
::= { snMspsPimNeighborEntry 10 }
snMspsPimNeighborSRCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Evaluates to TRUE if this neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM."
REFERENCE "RFC 3973 section 4.3.4"
::= { snMspsPimNeighborEntry 11 }
snMspsPimNeighborRPFCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Evaluates to TRUE if this neighbor is RPF Vector Capable."
::= { snMspsPimNeighborEntry 12 }
snMspsPimNeighborBidirCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Evaluates to TRUE if this neighbor is Bidir-PIM Capable."
::= { snMspsPimNeighborEntry 13 }
--
-- The PIM IP Multicast Route Table
--
snMspsPimIpMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM multicast routing information"
::= { snMspsPimTables 3 }
snMspsPimIpMRouteEntry OBJECT-TYPE
SYNTAX SnMspsPimIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimIpMRouteTable. There
is one entry for each incoming interface running PIM"
INDEX { snMspsPimIpMRouteCompId, snMspsPimIpMRouteAddrType,
snMspsPimIpMRouteGroup, snMspsPimIpMRouteSource,
snMspsPimIpMRouteSourceMasklen }
::= { snMspsPimIpMRouteTable 1 }
SnMspsPimIpMRouteEntry ::= SEQUENCE {
snMspsPimIpMRouteCompId Integer32,
snMspsPimIpMRouteAddrType InetAddressType,
snMspsPimIpMRouteGroup InetAddress,
snMspsPimIpMRouteSource InetAddress,
snMspsPimIpMRouteSourceMasklen Integer32,
snMspsPimIpMRouteUpstreamNeighbor InetAddress,
snMspsPimIpMRouteInIfIndex Integer32,
snMspsPimIpMRouteUpTime TimeTicks,
snMspsPimIpMRoutePkts Counter32,
snMspsPimIpMRouteUpstreamAssertTimer TimeTicks,
snMspsPimIpMRouteAssertMetric Integer32,
snMspsPimIpMRouteAssertMetricPref Integer32,
snMspsPimIpMRouteAssertRPTBit TruthValue,
snMspsPimIpMRouteTimerFlags Integer32,
snMspsPimIpMRouteFlags Integer32,
snMspsPimIpMRouteUpstreamPruneState INTEGER,
snMspsPimIpMRouteUpstreamPruneLimitTimer TimeTicks,
snMspsPimIpMRouteOriginatorState INTEGER,
snMspsPimIpMRouteSourceActiveTimer TimeTicks,
snMspsPimIpMRouteStateRefreshTimer TimeTicks,
snMspsPimIpMRouteExpiryTime TimeTicks,
snMspsPimIpMRouteDifferentInIfPackets Counter32,
snMspsPimIpMRouteOctets Counter32,
snMspsPimIpMRouteProtocol IANAipMRouteProtocol,
snMspsPimIpMRouteRtProto IANAipRouteProtocol,
snMspsPimIpMRouteRtAddress InetAddress,
snMspsPimIpMRouteRtMasklen Integer32,
snMspsPimIpMRouteRtType INTEGER,
snMspsPimIpMRouteHCOctets Counter64,
snMspsPimIpMRouteOIfList PortList,
snMspsPimIpMRouteRPFVectorAddr InetAddress,
snMspsPimIpMRoutePimMode INTEGER
}
snMspsPimIpMRouteCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component Id of this table"
::= { snMspsPimIpMRouteEntry 1 }
snMspsPimIpMRouteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP family in which the route belongs to."
::= { snMspsPimIpMRouteEntry 2 }
snMspsPimIpMRouteGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry
contains multicast routing information."
::= { snMspsPimIpMRouteEntry 3 }
snMspsPimIpMRouteSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRouteSourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { snMspsPimIpMRouteEntry 4 }
snMspsPimIpMRouteSourceMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRouteSource identifies the sources for which
this entry contains multicast routing information."
::= { snMspsPimIpMRouteEntry 5 }
snMspsPimIpMRouteUpstreamNeighbor OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources to this multicast
address are received."
::= { snMspsPimIpMRouteEntry 6 }
snMspsPimIpMRouteInIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface on which IP
datagrams sent by these sources to this multicast address
are received."
::= { snMspsPimIpMRouteEntry 7 }
snMspsPimIpMRouteUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router."
::= { snMspsPimIpMRouteEntry 8 }
snMspsPimIpMRoutePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which this router has received from
these sources and addressed to this multicast group
address."
::= { snMspsPimIpMRouteEntry 9 }
snMspsPimIpMRouteUpstreamAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert has changed the
upstream neighbor away from the RPF neighbor."
::= { snMspsPimIpMRouteEntry 10 }
snMspsPimIpMRouteAssertMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received."
::= { snMspsPimIpMRouteEntry 11 }
snMspsPimIpMRouteAssertMetricPref OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect."
::= { snMspsPimIpMRouteEntry 12 }
snMspsPimIpMRouteAssertRPTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect."
::= { snMspsPimIpMRouteEntry 13 }
snMspsPimIpMRouteTimerFlags OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes PIM-specific Timer flags related to a
Multicast Route Entry. If the bit is 1 indicates that timer
is started for that entry. The bits corresponding to the
timers are as follows:
0 - JP Suppression Timer, 1 - Oif Timer, 2 - Entry Timer,
3 - Reg Suppression Timer, 4 - Assert Timer,
5 - RandomDelayJoin Timer.
For example, If this object value is 3 (0000 0011), then
it means that JPSuppression timer and Oif timer are running.
This is for both SM and DM. The bits which are not applicable
to DM/SM will be filled with 0 "
::= { snMspsPimIpMRouteEntry 14 }
snMspsPimIpMRouteFlags OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits."
::= { snMspsPimIpMRouteEntry 15 }
snMspsPimIpMRouteUpstreamPruneState OBJECT-TYPE
SYNTAX INTEGER {
forwarding (1),
ackpending (2),
pruned (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the local router has pruned itself from the tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only by PIM-DM."
REFERENCE "RFC 3973 section 4.4.1"
::= { snMspsPimIpMRouteEntry 16 }
snMspsPimIpMRouteUpstreamPruneLimitTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the local router may send a (S,G)
Prune message on pimSGRPFIfIndex. This timer is called the
(S,G) Prune Limit Timer in the PIM-DM specification. This
object is zero if the timer is not running. This object is
used only by PIM-DM."
REFERENCE "RFC 2973 section 4.8"
::= { snMspsPimIpMRouteEntry 17 }
snMspsPimIpMRouteOriginatorState OBJECT-TYPE
SYNTAX INTEGER {
notOriginator (1),
originator (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the router is an originator for an (S,G) message
flow. This corresponds to the state of the per-(S,G)
Originator state machine in the PIM-DM specification. This
object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.5.2"
::= { snMspsPimIpMRouteEntry 18 }
snMspsPimIpMRouteSourceActiveTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If pimSGOriginatorState is 'originator', this is the time
remaining before the local router reverts to a notOriginator
state. Otherwise, this is zero. This timer is called the
Source Active Timer in the PIM-DM specification. This
object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.8"
::= { snMspsPimIpMRouteEntry 19 }
snMspsPimIpMRouteStateRefreshTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If pimSGOriginatorState is 'originator', this is the time
remaining before the local router sends a State Refresh
message. Otherwise, this is zero. This timer is called the
State Refresh Timer in the PIM-DM specification. This
object is used only by PIM-DM."
REFERENCE "RFC 3973 section 4.8"
::= { snMspsPimIpMRouteEntry 20 }
snMspsPimIpMRouteExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out."
::= { snMspsPimIpMRouteEntry 21 }
snMspsPimIpMRouteDifferentInIfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of packets which this router has received from
these sources and addressed to this multicast group address,
which were dropped because they were not received on the
interface indicated by snMspsPimIpMRouteInIfIndex."
::= { snMspsPimIpMRouteEntry 22 }
snMspsPimIpMRouteOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router."
::= { snMspsPimIpMRouteEntry 23 }
snMspsPimIpMRouteProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast routing protocol via which this multicast
forwarding entry was learned."
::= { snMspsPimIpMRouteEntry 24 }
snMspsPimIpMRouteRtProto OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which the route used to find the
upstream or parent interface for this multicast forwarding
entry was learned. Inclusion of values for routing
protocols is not intended to imply that those protocols need
be supported."
::= { snMspsPimIpMRouteEntry 25}
snMspsPimIpMRouteRtAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address portion of the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { snMspsPimIpMRouteEntry 26 }
snMspsPimIpMRouteRtMasklen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask associated with the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { snMspsPimIpMRouteEntry 27 }
snMspsPimIpMRouteRtType OBJECT-TYPE
SYNTAX INTEGER {
unicast (1), -- Unicast route used in multicast RIB
multicast (2) -- Multicast route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Route type"
::= { snMspsPimIpMRouteEntry 28 }
snMspsPimIpMRouteHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router.
This object is a 64-bit version of snMspsPimIpMRouteOctets."
::= { snMspsPimIpMRouteEntry 29 }
snMspsPimIpMRouteOIfList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the Outgoing Interface List of the mroute"
::= { snMspsPimIpMRouteEntry 30 }
snMspsPimIpMRouteRPFVectorAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It shows the RPF vector Address to reach the actual destination:
either RP for creating (*,G) entry,
multicast Source for creating (S,G) entry.This Vector is stored
from the received Join/Prune Packet."
::= { snMspsPimIpMRouteEntry 31 }
snMspsPimIpMRoutePimMode OBJECT-TYPE
SYNTAX INTEGER {
dm (1),
sm (2),
ssm (3),
bidir (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value shows the PIM mode of the group present
in the Mroute entry"
::= { snMspsPimIpMRouteEntry 32 }
--
-- The PIM Next Hop Table
--
snMspsPimIpMRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimIpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM information on the next hops
on outgoing interfaces for forwarding multicast datagrams"
::= { snMspsPimTables 4 }
snMspsPimIpMRouteNextHopEntry OBJECT-TYPE
SYNTAX SnMspsPimIpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
snMspsPimIpMRouteNextHopState is pruned(1)."
INDEX { snMspsPimIpMRouteNextHopCompId, snMspsPimIpMRouteNextHopAddrType,
snMspsPimIpMRouteNextHopGroup, snMspsPimIpMRouteNextHopSource,
snMspsPimIpMRouteNextHopSourceMasklen, snMspsPimIpMRouteNextHopIfIndex,
snMspsPimIpMRouteNextHopAddress }
::= { snMspsPimIpMRouteNextHopTable 1 }
SnMspsPimIpMRouteNextHopEntry ::= SEQUENCE {
snMspsPimIpMRouteNextHopCompId Integer32,
snMspsPimIpMRouteNextHopAddrType InetAddressType,
snMspsPimIpMRouteNextHopGroup InetAddress,
snMspsPimIpMRouteNextHopSource InetAddress,
snMspsPimIpMRouteNextHopSourceMasklen Integer32,
snMspsPimIpMRouteNextHopIfIndex Integer32,
snMspsPimIpMRouteNextHopAddress InetAddress,
snMspsPimIpMRouteNextHopPruneReason INTEGER,
snMspsPimIpMRouteNextHopState INTEGER,
snMspsPimIpMRouteNextHopUpTime TimeTicks,
snMspsPimIpMRouteNextHopExpiryTime TimeTicks,
snMspsPimIpMRouteNextHopProtocol IANAipMRouteProtocol,
snMspsPimIpMRouteNextHopPkts Counter32
}
snMspsPimIpMRouteNextHopCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The component Id for this table "
::= { snMspsPimIpMRouteNextHopEntry 1 }
snMspsPimIpMRouteNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP family in which the Next hop address belongs to."
::= { snMspsPimIpMRouteNextHopEntry 2 }
snMspsPimIpMRouteNextHopGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group for which this entry specifies a
next-hop on an outgoing interface."
::= { snMspsPimIpMRouteNextHopEntry 3 }
snMspsPimIpMRouteNextHopSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of snMspsPimIpMRouteNextHopSourceMask identifies
the sources for which this entry specifies a next-hop on an
outgoing interface."
::= { snMspsPimIpMRouteNextHopEntry 4 }
snMspsPimIpMRouteNextHopSourceMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of snMspsPimIpMRouteNextHopSource identifies the sources for
which this entry specifies a next-hop on an outgoing interface"
::= { snMspsPimIpMRouteNextHopEntry 5 }
snMspsPimIpMRouteNextHopIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for the outgoing
interface for this next-hop."
::= { snMspsPimIpMRouteNextHopEntry 6 }
snMspsPimIpMRouteNextHopAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next-hop specific to this entry. For
most interfaces, this is identical to snMspsPimIpMRouteNextHopGroup.
NBMA interfaces, however, may have multiple next-hop
addresses out a single outgoing interface."
::= { snMspsPimIpMRouteNextHopEntry 7 }
snMspsPimIpMRouteNextHopPruneReason OBJECT-TYPE
SYNTAX INTEGER {
forwarding (0),
other (1),
prune (2),
assert (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing."
::= { snMspsPimIpMRouteNextHopEntry 8 }
snMspsPimIpMRouteNextHopState OBJECT-TYPE
SYNTAX INTEGER { pruned(1), forwarding(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the outgoing interface and next-
hop represented by this entry is currently being used to
forward IP datagrams. The value 'forwarding' indicates it
is currently being used; the value 'pruned' indicates it is
not."
::= { snMspsPimIpMRouteNextHopEntry 9 }
snMspsPimIpMRouteNextHopUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router"
::= { snMspsPimIpMRouteNextHopEntry 10 }
snMspsPimIpMRouteNextHopExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out. If ipMRouteNextHopState is pruned(1), the
remaining time until the prune expires and the state reverts
to forwarding(2). Otherwise, the remaining time until this
entry is removed from the table. The time remaining may be
copied from ipMRouteExpiryTime if the protocol in use for
this entry does not specify next-hop timers. The value 0
indicates that the entry is not subject to aging."
::= { snMspsPimIpMRouteNextHopEntry 11 }
snMspsPimIpMRouteNextHopProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this next-hop was learned."
::= { snMspsPimIpMRouteNextHopEntry 12 }
snMspsPimIpMRouteNextHopPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which have been forwarded using this
route."
::= { snMspsPimIpMRouteNextHopEntry 13 }
--
-- The PIM Candidate-RP Table
--
snMspsPimCandidateRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of snMspsPimStdComponentCRPHoldTime is
non-zero. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of snMspsPimStdComponentCRPHoldTime is non-
zero)."
::= { snMspsPimTables 6 }
snMspsPimCandidateRPEntry OBJECT-TYPE
SYNTAX SnMspsPimCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimCandidateRPTable."
INDEX { snMspsPimCandidateRPCompId,
snMspsPimCandidateRPAddrType,
snMspsPimCandidateRPGroupAddress,
snMspsPimCandidateRPGroupMasklen,
snMspsPimCandidateRPAddress
}
::= { snMspsPimCandidateRPTable 1 }
SnMspsPimCandidateRPEntry ::= SEQUENCE {
snMspsPimCandidateRPCompId Integer32,
snMspsPimCandidateRPAddrType InetAddressType,
snMspsPimCandidateRPGroupAddress InetAddress,
snMspsPimCandidateRPGroupMasklen Integer32,
snMspsPimCandidateRPAddress InetAddress,
snMspsPimCandidateRPPriority Integer32,
snMspsPimCandidateRPRowStatus RowStatus,
snMspsPimCandidateRPPimMode INTEGER
}
snMspsPimCandidateRPCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Component Id for this table "
::= { snMspsPimCandidateRPEntry 1 }
snMspsPimCandidateRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address type in which the multicast group address,
and RP address belong to."
::= { snMspsPimCandidateRPEntry 2 }
snMspsPimCandidateRPGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address which, when combined with
snMspsPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snMspsPimCandidateRPEntry 3 }
snMspsPimCandidateRPGroupMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address mask which, when combined with
snMspsPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snMspsPimCandidateRPEntry 4 }
snMspsPimCandidateRPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (unicast) address of the interface which will be
advertised as a Candidate-RP."
::= { snMspsPimCandidateRPEntry 5 }
snMspsPimCandidateRPPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the interface which will be
advertised as a Candidate-RP."
::= { snMspsPimCandidateRPEntry 6 }
snMspsPimCandidateRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsPimCandidateRPEntry 7 }
snMspsPimCandidateRPPimMode OBJECT-TYPE
SYNTAX INTEGER {
sm (2),
bidir (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value shows the PIM mode of the group for
which candidate RP is configured."
::= { snMspsPimCandidateRPEntry 8 }
--
-- The PIM Static RP-Set Table
--
snMspsPimStaticRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStaticRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the IP multicast groups for
which the routers are available as the RP through static
configuration."
::= { snMspsPimTables 7 }
snMspsPimStaticRPSetEntry OBJECT-TYPE
SYNTAX SnMspsPimStaticRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimStaticRPSetTable."
INDEX { snMspsPimStaticRPSetCompId, snMspsPimStaticRPAddrType,
snMspsPimStaticRPSetGroupAddress,
snMspsPimStaticRPSetGroupMasklen}
::= { snMspsPimStaticRPSetTable 1 }
SnMspsPimStaticRPSetEntry ::= SEQUENCE {
snMspsPimStaticRPSetCompId Integer32,
snMspsPimStaticRPAddrType InetAddressType,
snMspsPimStaticRPSetGroupAddress InetAddress,
snMspsPimStaticRPSetGroupMasklen Integer32,
snMspsPimStaticRPAddress InetAddress,
snMspsPimStaticRPRowStatus RowStatus,
snMspsPimStaticRPEmbdFlag INTEGER,
snMspsPimStaticRPPimMode INTEGER
}
snMspsPimStaticRPSetCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Component Id for this table "
::= { snMspsPimStaticRPSetEntry 1 }
snMspsPimStaticRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type in which the RP address belongs to."
::= { snMspsPimStaticRPSetEntry 2 }
snMspsPimStaticRPSetGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address which, when combined with
pimStaticRPSetGroupMask, gives the group prefix for which this
entry contains information about the RP."
::= { snMspsPimStaticRPSetEntry 3 }
snMspsPimStaticRPSetGroupMasklen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address mask which, when combined with
pimStaticRPSetGroupAddress, gives the group prefix for which this
entry contains information about the RP."
::= { snMspsPimStaticRPSetEntry 4 }
snMspsPimStaticRPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the interface which will be
static configured as the RP."
::= { snMspsPimStaticRPSetEntry 5 }
snMspsPimStaticRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsPimStaticRPSetEntry 6 }
snMspsPimStaticRPEmbdFlag OBJECT-TYPE
SYNTAX INTEGER { disable (0), enable (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the flag indicates if entry is configured
for static RP or embedded-RP.
disabled - entry configured for Static RP
enabled - entry configured for Embedded RP."
DEFVAL { 0 }
::= { snMspsPimStaticRPSetEntry 7 }
snMspsPimStaticRPPimMode OBJECT-TYPE
SYNTAX INTEGER {
sm (2),
bidir (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value shows the PIM mode of the group for
which static RP is configured."
::= { snMspsPimStaticRPSetEntry 8 }
--
-- snMspsPimComponentModeTable
--
snMspsPimComponentModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimComponentModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the components modes)."
::= { snMspsPimTables 8 }
snMspsPimComponentModeEntry OBJECT-TYPE
SYNTAX SnMspsPimComponentModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimComponentModeTable."
INDEX { snMspsPimComponentId }
::= { snMspsPimComponentModeTable 1 }
SnMspsPimComponentModeEntry ::= SEQUENCE {
snMspsPimComponentId Integer32,
snMspsPimComponentMode INTEGER,
snMspsPimCompGraftRetryCount Integer32
}
snMspsPimComponentId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Component Id for this table "
::= { snMspsPimComponentModeEntry 1 }
snMspsPimComponentMode OBJECT-TYPE
SYNTAX INTEGER {
dense (1),
sparse (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the mode of the component. A value of
1 indicates the component is running in DM mode and value of
2 indicated that the component is running in DM mode"
DEFVAL { 2 }
::= { snMspsPimComponentModeEntry 2 }
snMspsPimCompGraftRetryCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The value indicates the number of retries that can be made to
send the graft message"
DEFVAL { 1 }
::= { snMspsPimComponentModeEntry 3 }
-- Register Checksum Config Table
snMspsPimRegChkSumCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimRegChkSumCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing RPs configured in CISCO Router"
::= { snMspsPimTables 9 }
snMspsPimRegChkSumCfgEntry OBJECT-TYPE
SYNTAX SnMspsPimRegChkSumCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimRegChkSumCfgTable."
INDEX {snMspsPimRegChkSumTblCompId, snMspsPimRegChkSumTblRPAddrType, snMspsPimRegChkSumTblRPAddress}
::= { snMspsPimRegChkSumCfgTable 1 }
SnMspsPimRegChkSumCfgEntry ::= SEQUENCE {
snMspsPimRegChkSumTblCompId Integer32,
snMspsPimRegChkSumTblRPAddrType InetAddressType,
snMspsPimRegChkSumTblRPAddress InetAddress,
snMspsPimRPChkSumStatus INTEGER
}
snMspsPimRegChkSumTblCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Component Id for this table, This configuration is valid
only for a sparse mode component."
::= { snMspsPimRegChkSumCfgEntry 1 }
snMspsPimRegChkSumTblRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type of this entry"
::= { snMspsPimRegChkSumCfgEntry 2 }
snMspsPimRegChkSumTblRPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RP Address of the router to which the Register
checksum should be calculated."
::= { snMspsPimRegChkSumCfgEntry 3 }
snMspsPimRPChkSumStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this Row, by which new entries may be created
If the RowStatus is set, then the Register Message checksum
should be calculated including the data packet other wise for
for any RP address not part of this table checksum
should be sent as per the draft-ietf-pim-sm-new-v2"
::= { snMspsPimRegChkSumCfgEntry 4 }
--
-- The BIDIR-PIM DF Table
--
snMspsPimDFTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimDFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table shows the Elected RP
for the IP multicast group"
::= { snMspsPimTables 10 }
snMspsPimDFEntry OBJECT-TYPE
SYNTAX SnMspsPimDFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimDFTable."
INDEX { snMspsPimDFIfAddrType,
snMspsPimDFElectedRP,
snMspsPimDFIfIndex
}
::= { snMspsPimDFTable 1 }
SnMspsPimDFEntry ::= SEQUENCE {
snMspsPimDFIfAddrType InetAddressType,
snMspsPimDFElectedRP InetAddress,
snMspsPimDFIfIndex Integer32,
snMspsPimDFState INTEGER,
snMspsPimDFWinnerAddr InetAddress,
snMspsPimDFWinnerUptime TimeTicks,
snMspsPimDFElectionStateTimer TimeTicks,
snMspsPimDFWinnerMetric Unsigned32,
snMspsPimDFWinnerMetricPref Unsigned32,
snMspsPimDFMessageCount Integer32
}
snMspsPimDFIfAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP family for which DF state to be retrieved."
::= { snMspsPimDFEntry 1 }
snMspsPimDFElectedRP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (unicast) address of the Elected RP for which the DF state of the
interface to be retrieved."
::= { snMspsPimDFEntry 2 }
snMspsPimDFIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which the
DF state to be retrieved."
::= { snMspsPimDFEntry 3 }
snMspsPimDFState OBJECT-TYPE
SYNTAX INTEGER {
offer (1),
winner (2),
backoff (3),
lose (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DF state on the PIM interface for the Elected RP."
::= { snMspsPimDFEntry 4 }
snMspsPimDFWinnerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (Link-Local) address of the DFWinner(the PIM neighbor)
for the Elected RP in the PIM interface"
::= { snMspsPimDFEntry 5 }
snMspsPimDFWinnerUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this DF Winner got elected."
::= { snMspsPimDFEntry 6 }
snMspsPimDFElectionStateTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timer for DF election state, on the expiry of this timer
the existing DF state gets expired and changes to the appropriate state.
If the timer is not running, then the existing state is permanent, till
the occurence of next event."
::= { snMspsPimDFEntry 7 }
snMspsPimDFWinnerMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The winner metric advertised by the DF winner or zero if there is no
DF exist"
::= { snMspsPimDFEntry 8 }
snMspsPimDFWinnerMetricPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The winner metric preference advertised by the DF winner
or zero if there is no DF exist"
::= { snMspsPimDFEntry 9 }
snMspsPimDFMessageCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DF election Message Count(MC) for the DF state of RPA (I)"
::= { snMspsPimDFEntry 10 }
--
-- The PIM Elected-RP Table
--
snMspsPimElectedRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimElectedRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table shows the Elected RP
for the IP multicast group"
::= { snMspsPimTables 11 }
snMspsPimElectedRPEntry OBJECT-TYPE
SYNTAX SnMspsPimElectedRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimElectedRPTable."
INDEX { snMspsPimElectedRPCompId,
snMspsPimElectedRPAddrType,
snMspsPimElectedRPGroupAddress,
snMspsPimElectedRPGroupMasklen
}
::= { snMspsPimElectedRPTable 1 }
SnMspsPimElectedRPEntry ::= SEQUENCE {
snMspsPimElectedRPCompId Integer32,
snMspsPimElectedRPAddrType InetAddressType,
snMspsPimElectedRPGroupAddress InetAddress,
snMspsPimElectedRPGroupMasklen Integer32,
snMspsPimElectedRPAddress InetAddress,
snMspsPimElectedRPPriority Integer32,
snMspsPimElectedRPHoldTime Integer32,
snMspsPimElectedRPUpTime Integer32
}
snMspsPimElectedRPCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Component Id for this table "
::= { snMspsPimElectedRPEntry 1 }
snMspsPimElectedRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address type in which the multicast group address,
and RP address belong to."
::= { snMspsPimElectedRPEntry 2 }
snMspsPimElectedRPGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which
the Elected RP to be identified."
::= { snMspsPimElectedRPEntry 3 }
snMspsPimElectedRPGroupMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address mask which, when combined with
snMspsPimElectedRPGroupMask, identifies a group prefix for which
Elected-RP to be identified."
::= { snMspsPimElectedRPEntry 4 }
snMspsPimElectedRPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (unicast) address of the interface which is
Elected as RP for the IP multicast Group address."
::= { snMspsPimElectedRPEntry 5 }
snMspsPimElectedRPPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the interface which is
Elected as an RP for the IP multicast group address."
::= { snMspsPimElectedRPEntry 6 }
snMspsPimElectedRPHoldTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The HoldTime of the Elected RP for the IP multicast group address."
::= { snMspsPimElectedRPEntry 7 }
snMspsPimElectedRPUpTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the up time of the Elected RP for the IP multicast group address."
::= { snMspsPimElectedRPEntry 8 }
--
-- The PIM Extended Neighbor Table
--
snMspsPimNeighborExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimNeighborExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The extended (conceptual) table listing the router's PIM Neighbors.
This table differs from snMspsPimNeighborTable as it has
snMspsPimNeighborExtIfIndex as an index instead of the Component ID. This
is because in IPv6, two neighbors on different interfaces can have the
same link-local address. A Component ID List is added as an interface
can be associated with multiple components."
::= { snMspsPimTables 12 }
snMspsPimNeighborExtEntry OBJECT-TYPE
SYNTAX SnMspsPimNeighborExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimNeighborExtTable."
INDEX { snMspsPimNeighborExtIfIndex, snMspsPimNeighborExtAddrType,
snMspsPimNeighborExtAddress }
::= { snMspsPimNeighborExtTable 1 }
SnMspsPimNeighborExtEntry ::= SEQUENCE {
snMspsPimNeighborExtIfIndex Integer32,
snMspsPimNeighborExtAddrType InetAddressType,
snMspsPimNeighborExtAddress InetAddress,
snMspsPimNeighborExtCompIdList CompList,
snMspsPimNeighborExtUpTime TimeTicks,
snMspsPimNeighborExtExpiryTime TimeTicks,
snMspsPimNeighborExtGenerationId Integer32,
snMspsPimNeighborExtLanDelay Integer32,
snMspsPimNeighborExtDRPriority Unsigned32,
snMspsPimNeighborExtOverrideInterval Integer32,
snMspsPimNeighborExtSRCapable TruthValue,
snMspsPimNeighborExtRPFCapable TruthValue,
snMspsPimNeighborExtBidirCapable TruthValue
}
snMspsPimNeighborExtIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM Neighbor."
::= { snMspsPimNeighborExtEntry 1 }
snMspsPimNeighborExtAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address Type of the PIM Neighbor for which this entry
contains information."
::= { snMspsPimNeighborExtEntry 2 }
snMspsPimNeighborExtAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the PIM Neighbor for which this entry
contains information."
::= { snMspsPimNeighborExtEntry 3 }
snMspsPimNeighborExtCompIdList OBJECT-TYPE
SYNTAX CompList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The components associated with the interface on which the PIM
neighbor for this entry is found."
::= { snMspsPimNeighborExtEntry 4 }
snMspsPimNeighborExtUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this PIM Neighbor (last) became a Neighbor
of the local router."
::= { snMspsPimNeighborExtEntry 5 }
snMspsPimNeighborExtExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before this PIM Neighbor will be
aged out."
::= { snMspsPimNeighborExtEntry 6 }
snMspsPimNeighborExtGenerationId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Generation identifier of the router. This is used by
neighbour routers to quickly detect router reboot and synchronize
RP-Set information and forwarding states by triggering Bootstrap
and Join/Prune messages to the rebooted router"
::= { snMspsPimNeighborExtEntry 7 }
snMspsPimNeighborExtLanDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LanDelay configured for this PIM Neighbor"
::= { snMspsPimNeighborExtEntry 8 }
snMspsPimNeighborExtDRPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DR priority value configured for this PIM Neighbor"
::= { snMspsPimNeighborExtEntry 9 }
snMspsPimNeighborExtOverrideInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Override Interval configured for this PIM Neighbor"
::= { snMspsPimNeighborExtEntry 10 }
snMspsPimNeighborExtSRCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this Neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM."
REFERENCE "RFC 3973 section 4.3.4"
::= { snMspsPimNeighborExtEntry 11 }
snMspsPimNeighborExtRPFCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this Neighbor is RPF Vector Capable."
::= { snMspsPimNeighborExtEntry 12 }
snMspsPimNeighborExtBidirCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Evaluates to TRUE if this Neighbor is Bidir-PIM Capable."
::= { snMspsPimNeighborExtEntry 13 }
-- ----------------
-- TRAP MIB BEGIN
-- ----------------
snMspsHARtrId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" The MIB object snMspsHARtrId,is the configured Router-Id for the
router.This ID is obtained from IP module"
::= { snMspsPimTrapsControl 1 }
snMspsPimHAEvent OBJECT-TYPE
SYNTAX INTEGER {
standbyInstanceUP(1),
standbyInstanceDown(2),
instancesSwitchover(3),
dynamicBulkupdateStart(4),
dynamicBulkupdateComplete(5),
dynamicBulkupdateAborted(6)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Trap Events:
StandbyInstanceUP: generated when the Active PIM instance detects
Standby instance becoming Up.
StandbyInstanceDown: generated when the Active PIM instance detects
Standby instance going Down.
InstancesSwitchover: generated When both the Active and Standby PIM
instances change their roles and transits to Standby and Active state
respectively.
DynamicBulkupdateStart: generated when the Active PIM instance starts
sending dynamic Bulk updates to the Standby instance.
DynamicBulkupdateComplete: genreated when the Active PIM instance
receives an event from Standby PIM instance indicating Completion of
Bulk Update.
DynamicBulkupdateAborted: generated when Bulk Update is aborted."
::= { snMspsPimTrapsControl 3 }
snMspsPimHAEventTrap NOTIFICATION-TYPE
OBJECTS {
snMspsHARtrId,
snMspsPimHAEvent
}
STATUS deprecated
DESCRIPTION
"A notification is sent to the management entity whenever there is a
state change in the PIM hotstandby Module."
::= { snMspsPimTraps 1 }
snMspsPimBidirEventTrap NOTIFICATION-TYPE
OBJECTS {
snMspsHARtrId,
snMspsPimNeighborAddress,
snMspsPimNeighborIfIndex
}
STATUS deprecated
DESCRIPTION
"A notification is sent to the management entity whenever a Bidirectional
mode enabled router receives a Hello Msg from a Bidirectional disabled
router, in a rate limited manner."
::= { snMspsPimTraps 2 }
-- -----------------
-- TRAP MIB END
-- -----------------
--
-- The PIM IP Multicast Route Table for Bidir
--
snMspsPimIpGenMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimIpGenMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table list the PIM multicast routing information in Bidir Mode"
::= { snMspsPimTables 13 }
snMspsPimIpGenMRouteEntry OBJECT-TYPE
SYNTAX SnMspsPimIpGenMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies an entry (conceptual row) in the snMspsPimIpGenMRouteTable.
One entry is listed for incoming interface on which PIM is enabled"
INDEX { snMspsPimIpGenMRouteCompId, snMspsPimIpGenMRouteAddrType,
snMspsPimIpGenMRouteGroup, snMspsPimIpGenMRouteGroupMasklen,
snMspsPimIpGenMRouteSource, snMspsPimIpGenMRouteSourceMasklen}
::= { snMspsPimIpGenMRouteTable 1 }
SnMspsPimIpGenMRouteEntry ::= SEQUENCE {
snMspsPimIpGenMRouteCompId Integer32,
snMspsPimIpGenMRouteAddrType InetAddressType,
snMspsPimIpGenMRouteGroup InetAddress,
snMspsPimIpGenMRouteGroupMasklen Integer32,
snMspsPimIpGenMRouteSource InetAddress,
snMspsPimIpGenMRouteSourceMasklen Integer32,
snMspsPimIpGenMRouteUpstreamNeighbor InetAddress,
snMspsPimIpGenMRouteInIfIndex Integer32,
snMspsPimIpGenMRouteUpTime TimeTicks,
snMspsPimIpGenMRoutePkts Counter32,
snMspsPimIpGenMRouteUpstreamAssertTimer TimeTicks,
snMspsPimIpGenMRouteAssertMetric Integer32,
snMspsPimIpGenMRouteAssertMetricPref Integer32,
snMspsPimIpGenMRouteAssertRPTBit TruthValue,
snMspsPimIpGenMRouteTimerFlags Integer32,
snMspsPimIpGenMRouteFlags Integer32,
snMspsPimIpGenMRouteUpstreamPruneState INTEGER,
snMspsPimIpGenMRouteUpstreamPruneLimitTimer TimeTicks,
snMspsPimIpGenMRouteOriginatorState INTEGER,
snMspsPimIpGenMRouteSourceActiveTimer TimeTicks,
snMspsPimIpGenMRouteStateRefreshTimer TimeTicks,
snMspsPimIpGenMRouteExpiryTime TimeTicks,
snMspsPimIpGenMRouteDifferentInIfPackets Counter32,
snMspsPimIpGenMRouteOctets Counter32,
snMspsPimIpGenMRouteProtocol IANAipMRouteProtocol,
snMspsPimIpGenMRouteRtProto IANAipRouteProtocol,
snMspsPimIpGenMRouteRtAddress InetAddress,
snMspsPimIpGenMRouteRtMasklen Integer32,
snMspsPimIpGenMRouteRtType INTEGER,
snMspsPimIpGenMRouteHCOctets Counter64,
snMspsPimIpGenMRouteOIfList PortList,
snMspsPimIpGenMRouteRPFVectorAddr InetAddress,
snMspsPimIpGenMRoutePimMode INTEGER,
snMspsPimIpGenMRouteType INTEGER,
snMspsPimIpGenMRouteNPStatus INTEGER
}
snMspsPimIpGenMRouteCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the component Id of snMspsPimIpGenMRouteTable"
::= { snMspsPimIpGenMRouteEntry 1 }
snMspsPimIpGenMRouteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the The IP family on which the route is present"
::= { snMspsPimIpGenMRouteEntry 2 }
snMspsPimIpGenMRouteGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the The IP multicast group address
for which the specified entry contain multicast routing information"
::= { snMspsPimIpGenMRouteEntry 3 }
snMspsPimIpGenMRouteGroupMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object displays the network mask, when combined with the corresponding
value of ipMRouteGroup identifies the groups for which the
entry contains multicast routing information"
::= { snMspsPimIpGenMRouteEntry 4 }
snMspsPimIpGenMRouteSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the network address when combined with the
corresponding value of ipMRouteSourceMask identifies the
sources for which the entry contains multicast routing
information"
::= { snMspsPimIpGenMRouteEntry 5 }
snMspsPimIpGenMRouteSourceMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the network mask when combined with the corresponding
value of ipMRouteSource identifies the sources for which
the entry contains multicast routing information"
::= { snMspsPimIpGenMRouteEntry 6 }
snMspsPimIpGenMRouteUpstreamNeighbor OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the address of the upstream neighbor"
::= { snMspsPimIpGenMRouteEntry 7 }
snMspsPimIpGenMRouteInIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the interface index value on which IP
packets are sent to the multicast group address"
::= { snMspsPimIpGenMRouteEntry 8 }
snMspsPimIpGenMRouteUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the time between the multicast routing information
learnt by the router"
::= { snMspsPimIpGenMRouteEntry 9 }
snMspsPimIpGenMRoutePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets the router has received
by the multicast group address"
::= { snMspsPimIpGenMRouteEntry 10 }
snMspsPimIpGenMRouteUpstreamAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the assert timer value which is the time remaining between the router
changing its upstream neighbor back to RPF neighbor. This is set only when PIM mode
is set to either Sparse and or Dense mode. 0 indicates that no upstream neighbor
has changed to RPF neighbor"
::= { snMspsPimIpGenMRouteEntry 11 }
snMspsPimIpGenMRouteAssertMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the metric advertised by the assert winner on the upstream
interface, or 0 if no assert is received."
::= { snMspsPimIpGenMRouteEntry 12 }
snMspsPimIpGenMRouteAssertMetricPref OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the preference advertised by the assert winner on the
upstream interface, or 0 if no assert is in effect."
::= { snMspsPimIpGenMRouteEntry 13 }
snMspsPimIpGenMRouteAssertRPTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays RPT-bit value advertised by the assert winner on
the upstream interface, else false is displayed"
::= { snMspsPimIpGenMRouteEntry 14 }
snMspsPimIpGenMRouteTimerFlags OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the PIM-specific timer flags related to a
Multicast Route Entry. If the bit is 1, it indicates that timer
is started for the specific entry. The bits corresponding to the
timers are as follows:
0 - JP Suppression Timer, 1 - Oif Timer, 2 - Entry Timer,
3 - Reg Suppression Timer, 4 - Assert Timer,
5 - RandomDelayJoin Timer.
For example, If the value is 3 (0000 0011), then
it means that JPSuppression timer and Oif timer are running.
This is for both sparse and dense mode. The bits which are not applicable
to DM/SM will be displayed with 0"
::= { snMspsPimIpGenMRouteEntry 15 }
snMspsPimIpGenMRouteFlags OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the PIM-specific flags related to a
multicast state entry"
::= { snMspsPimIpGenMRouteEntry 16 }
snMspsPimIpGenMRouteUpstreamPruneState OBJECT-TYPE
SYNTAX INTEGER {
forwarding (1),
ackpending (2),
pruned (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether the local router has pruned itself from the PIM dense tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only when PIM mode is set to dense mode."
REFERENCE "RFC 3973 section 4.4.1"
::= { snMspsPimIpGenMRouteEntry 17 }
snMspsPimIpGenMRouteUpstreamPruneLimitTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the time till the local router sends a (S,G)
prune message on pimSGRPFIfIndex. Zero is displayed if the timer is not running."
REFERENCE "RFC 2973 section 4.8"
::= { snMspsPimIpGenMRouteEntry 18 }
snMspsPimIpGenMRouteOriginatorState OBJECT-TYPE
SYNTAX INTEGER {
notOriginator (1),
originator (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether the router is the source for the (S,G) message
flow. This object is used only when PIM mode is set to dense mode"
REFERENCE "RFC 3973 section 4.5.2"
::= { snMspsPimIpGenMRouteEntry 19 }
snMspsPimIpGenMRouteSourceActiveTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If pimSGOriginatorState is displayed as 'originator', the active timer is the time
period between the local router changes to notOriginator state.
Otherwise, this is zero. This object is used only when PIM mode is set to Dense mode"
REFERENCE "RFC 3973 section 4.8"
::= { snMspsPimIpGenMRouteEntry 20 }
snMspsPimIpGenMRouteStateRefreshTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If pimSGOriginatorState is displayed as 'originator', then the state refresh timer is the time
taken to send a State Refresh message. This object is used only when PIM mode is set to Dense mode"
REFERENCE "RFC 3973 section 4.8"
::= { snMspsPimIpGenMRouteEntry 21 }
snMspsPimIpGenMRouteExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether minimum amount of time before this entry will
is timed out"
::= { snMspsPimIpGenMRouteEntry 22 }
snMspsPimIpGenMRouteDifferentInIfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object displays the number of packets which this router has received from
the multicast source and addressed to this multicast group address,
which were dropped as they were not received on the
interface specified by the snMspsPimIpGenMRouteInIfIndex"
::= { snMspsPimIpGenMRouteEntry 23 }
snMspsPimIpGenMRouteOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object displays the number of octets contained in IP packets which were
received from the multicast sources and destined to this multicast
group address"
::= { snMspsPimIpGenMRouteEntry 24 }
snMspsPimIpGenMRouteProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the multicast routing protocol through which this multicast
forwarding entry is learned"
::= { snMspsPimIpGenMRouteEntry 25 }
snMspsPimIpGenMRouteRtProto OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the routing mechanism through which the route used to find the
upstream or parent interface for this multicast forwarding
entry is learned"
::= { snMspsPimIpGenMRouteEntry 26}
snMspsPimIpGenMRouteRtAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the address portion of the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { snMspsPimIpGenMRouteEntry 27 }
snMspsPimIpGenMRouteRtMasklen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the The mask associated with the route which is used to find the upstream
or parent interface for this multicast forwarding entry"
::= { snMspsPimIpGenMRouteEntry 28 }
snMspsPimIpGenMRouteRtType OBJECT-TYPE
SYNTAX INTEGER {
unicast (1), -- Unicast route used in multicast RIB
multicast (2) -- Multicast route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the multicast route type."
::= { snMspsPimIpGenMRouteEntry 29 }
snMspsPimIpGenMRouteHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of octets present in the IP packets which were
received from multicast sources and addressed to this multicast
group address.
This object is a 64-bit version of snMspsPimIpGenMRouteOctets"
::= { snMspsPimIpGenMRouteEntry 30 }
snMspsPimIpGenMRouteOIfList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the outgoing interface list of the mroute"
::= { snMspsPimIpGenMRouteEntry 31 }
snMspsPimIpGenMRouteRPFVectorAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the RPF vector address to reach the actual destination:
either RP for creating (*,G) entry or ,
multicast Source for creating (S,G) entry. This vector address is obtained
from the received join/prune packet"
::= { snMspsPimIpGenMRouteEntry 32 }
snMspsPimIpGenMRoutePimMode OBJECT-TYPE
SYNTAX INTEGER {
dm (1),
sm (2),
ssm (3),
bidir (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the PIM mode of the group present
in the Mroute entry"
::= { snMspsPimIpGenMRouteEntry 33 }
snMspsPimIpGenMRouteType OBJECT-TYPE
SYNTAX INTEGER {
sg(1),
sgrpt(2),
starg(4),
ssrp(8),
default(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the route type for the group.This could be S,G or *,G or *,*,RP."
::= { snMspsPimIpGenMRouteEntry 34 }
snMspsPimIpGenMRouteNPStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the NP status of the mroute entry."
::= { snMspsPimIpGenMRouteEntry 35}
--
-- The PIM Gen Next Hop Table
--
snMspsPimIpGenMRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimIpGenMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the PIM information on the next hops
on outgoing interfaces for forwarding multicast packets"
::= { snMspsPimTables 14 }
snMspsPimIpGenMRouteNextHopEntry OBJECT-TYPE
SYNTAX SnMspsPimIpGenMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies an entry in the in the snMspsPimIpGenMRouteNextHopTable.
There is an entry in the ipMRouteNextHopTable with interface is running in PIM and
snMspsPimIpGenMRouteNextHopState is pruned(1)"
INDEX { snMspsPimIpGenMRouteNextHopCompId, snMspsPimIpGenMRouteNextHopAddrType,
snMspsPimIpGenMRouteNextHopGroup, snMspsPimIpGenMRouteNextHopGroupMasklen,
snMspsPimIpGenMRouteNextHopSource, snMspsPimIpGenMRouteNextHopSourceMasklen,
snMspsPimIpGenMRouteNextHopIfIndex, snMspsPimIpGenMRouteNextHopAddress}
::= { snMspsPimIpGenMRouteNextHopTable 1 }
SnMspsPimIpGenMRouteNextHopEntry ::= SEQUENCE {
snMspsPimIpGenMRouteNextHopCompId Integer32,
snMspsPimIpGenMRouteNextHopAddrType InetAddressType,
snMspsPimIpGenMRouteNextHopGroup InetAddress,
snMspsPimIpGenMRouteNextHopGroupMasklen Integer32,
snMspsPimIpGenMRouteNextHopSource InetAddress,
snMspsPimIpGenMRouteNextHopSourceMasklen Integer32,
snMspsPimIpGenMRouteNextHopIfIndex Integer32,
snMspsPimIpGenMRouteNextHopAddress InetAddress,
snMspsPimIpGenMRouteNextHopPruneReason INTEGER,
snMspsPimIpGenMRouteNextHopState INTEGER,
snMspsPimIpGenMRouteNextHopUpTime TimeTicks,
snMspsPimIpGenMRouteNextHopExpiryTime TimeTicks,
snMspsPimIpGenMRouteNextHopProtocol IANAipMRouteProtocol,
snMspsPimIpGenMRouteNextHopPkts Counter32,
snMspsPimIpGenMRouteNextHopNPStatus INTEGER
}
snMspsPimIpGenMRouteNextHopCompId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object displays the component Id in the next-hop table "
::= { snMspsPimIpGenMRouteNextHopEntry 1 }
snMspsPimIpGenMRouteNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the IP family of theNext hop address ."
::= { snMspsPimIpGenMRouteNextHopEntry 2 }
snMspsPimIpGenMRouteNextHopGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the next-hop on an outgoing interface for the IP multicast group "
::= { snMspsPimIpGenMRouteNextHopEntry 3 }
snMspsPimIpGenMRouteNextHopGroupMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the network mask length of the multicast group present in the next hop table"
::= { snMspsPimIpGenMRouteNextHopEntry 4 }
snMspsPimIpGenMRouteNextHopSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the network source address present in the next hop table"
::= { snMspsPimIpGenMRouteNextHopEntry 5 }
snMspsPimIpGenMRouteNextHopSourceMasklen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the network mask length of the multicast source present in the next hop table"
::= { snMspsPimIpGenMRouteNextHopEntry 6 }
snMspsPimIpGenMRouteNextHopIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the interface index present in the next hop table"
::= { snMspsPimIpGenMRouteNextHopEntry 7 }
snMspsPimIpGenMRouteNextHopAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object displays the address of the next-hop specific to this entry . For
most interfaces, this is identical to snMspsPimIpGenMRouteNextHopGroup but for .
NBMA interfaces may have multiple next-hop
addresses for an outgoing interface"
::= { snMspsPimIpGenMRouteNextHopEntry 8 }
snMspsPimIpGenMRouteNextHopPruneReason OBJECT-TYPE
SYNTAX INTEGER {
forwarding (0),
other (1),
prune (2),
assert (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the reason why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing"
::= { snMspsPimIpGenMRouteNextHopEntry 9 }
snMspsPimIpGenMRouteNextHopState OBJECT-TYPE
SYNTAX INTEGER { pruned(1), forwarding(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the outgoing interface and next-
hop represented by this entry is currently being used to
forward IP packets. The value 'forwarding' indicates it
is currently being used; the value 'pruned' indicates it is
not used"
::= { snMspsPimIpGenMRouteNextHopEntry 10 }
snMspsPimIpGenMRouteNextHopUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the time since the multicast routing information
learned by the router for the corresponding entry"
::= { snMspsPimIpGenMRouteNextHopEntry 11 }
snMspsPimIpGenMRouteNextHopExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the minimum amount of time remaining for this entry to be timed out.
The calculation of expiry time varies as follows;
1. If ipMRouteNextHopState is set pruned(1), the
remaining time until till the prune expires and the state reverts
to forwarding(2).
2. Otherwise, the remaining time until this
entry is removed from the table. The time remaining may be
copied from ipMRouteExpiryTime if the protocol in use for
this entry does not specify next-hop timers. The value 0
indicates that the entry is not subject to aging"
::= { snMspsPimIpGenMRouteNextHopEntry 12 }
snMspsPimIpGenMRouteNextHopProtocol OBJECT-TYPE
SYNTAX IANAipMRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the routing mechanism through which this next-hop is learned"
::= { snMspsPimIpGenMRouteNextHopEntry 13 }
snMspsPimIpGenMRouteNextHopPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets which are forwarded using this
route"
::= { snMspsPimIpGenMRouteNextHopEntry 14 }
snMspsPimIpGenMRouteNextHopNPStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the NP programming status of the next hop interface"
::= { snMspsPimIpGenMRouteNextHopEntry 15 }
-- Start of PRIVATE MIB implementation of standard PIM MIB for supporting
-- both PIMv4 and PIMv6
snMspsPimStdJoinPruneInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default interval at which periodic PIM-SM Join/Prune
messages are to be sent."
::= { snMspsPimStdScalars 1 }
-- The PIM Interface Table
snMspsPimStdInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table."
::= { snMspsPimStdTables 1 }
snMspsPimStdInterfaceEntry OBJECT-TYPE
SYNTAX SnMspsPimStdInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimInterfaceTable."
INDEX { snMspsPimStdInterfaceIfIndex, snMspsPimStdInterfaceAddrType}
::= { snMspsPimStdInterfaceTable 1 }
SnMspsPimStdInterfaceEntry ::= SEQUENCE {
snMspsPimStdInterfaceIfIndex Integer32,
snMspsPimStdInterfaceAddrType InetAddressType,
snMspsPimStdInterfaceAddress InetAddress,
snMspsPimStdInterfaceNetMaskLen Integer32,
snMspsPimStdInterfaceMode INTEGER,
snMspsPimStdInterfaceDR InetAddress,
snMspsPimStdInterfaceHelloInterval Integer32,
snMspsPimStdInterfaceStatus RowStatus,
snMspsPimStdInterfaceJoinPruneInterval Integer32,
snMspsPimStdInterfaceCBSRPreference Integer32
}
snMspsPimStdInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of this PIM interface."
::= { snMspsPimStdInterfaceEntry 1 }
snMspsPimStdInterfaceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type of the PIM Interface for which this entry
contains information."
::= { snMspsPimStdInterfaceEntry 2 }
snMspsPimStdInterfaceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the PIM interface."
::= { snMspsPimStdInterfaceEntry 3 }
snMspsPimStdInterfaceNetMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network mask for the IP address of the PIM interface."
::= { snMspsPimStdInterfaceEntry 4 }
snMspsPimStdInterfaceMode OBJECT-TYPE
SYNTAX INTEGER { dense(1), sparse(2), sparseDense(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1."
DEFVAL { dense }
::= { snMspsPimStdInterfaceEntry 5 }
snMspsPimStdInterfaceDR OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Designated Router on this PIM interface. For point-to-
point interfaces, this object has the value 0.0.0.0."
::= { snMspsPimStdInterfaceEntry 6 }
snMspsPimStdInterfaceHelloInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency at which PIM Hello messages are transmitted
on this interface."
DEFVAL { 30 }
::= { snMspsPimStdInterfaceEntry 7 }
snMspsPimStdInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface."
::= { snMspsPimStdInterfaceEntry 8 }
snMspsPimStdInterfaceJoinPruneInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval."
::= { snMspsPimStdInterfaceEntry 9 }
snMspsPimStdInterfaceCBSRPreference OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface."
DEFVAL { 0 }
::= { snMspsPimStdInterfaceEntry 10 }
-- The PIM Neighbor Table
snMspsPimStdNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's PIM neighbors."
::= { snMspsPimStdTables 2 }
snMspsPimStdNeighborEntry OBJECT-TYPE
SYNTAX SnMspsPimStdNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimNeighborTable."
INDEX { snMspsPimStdNeighborAddrType, snMspsPimStdNeighborAddress }
::= { snMspsPimStdNeighborTable 1 }
SnMspsPimStdNeighborEntry ::= SEQUENCE {
snMspsPimStdNeighborAddrType InetAddressType,
snMspsPimStdNeighborAddress InetAddress,
snMspsPimStdNeighborIfIndex Integer32,
snMspsPimStdNeighborUpTime TimeTicks,
snMspsPimStdNeighborExpiryTime TimeTicks,
snMspsPimStdNeighborMode INTEGER
}
snMspsPimStdNeighborAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address Type of the PIM neighbor for which this entry
contains information."
::= { snMspsPimStdNeighborEntry 1 }
snMspsPimStdNeighborAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the PIM neighbor for which this entry
contains information."
::= { snMspsPimStdNeighborEntry 2 }
snMspsPimStdNeighborIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM neighbor."
::= { snMspsPimStdNeighborEntry 3 }
snMspsPimStdNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this PIM neighbor (last) became a neighbor
of the local router."
::= { snMspsPimStdNeighborEntry 4 }
snMspsPimStdNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before this PIM neighbor will be
aged out."
::= { snMspsPimStdNeighborEntry 5 }
snMspsPimStdNeighborMode OBJECT-TYPE
SYNTAX INTEGER { dense(1), sparse(2) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The active PIM mode of this neighbor. This object is
deprecated for PIMv2 routers since all neighbors on the
interface must be either dense or sparse as determined by
the protocol running on the interface."
::= { snMspsPimStdNeighborEntry 6 }
--
-- The PIM IP Multicast Route Table
--
snMspsPimStdIpMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB."
::= { snMspsPimStdTables 3 }
snMspsPimStdIpMRouteEntry OBJECT-TYPE
SYNTAX SnMspsPimStdIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimIpMRouteTable. There
is one entry per entry in the ipMRouteTable whose incoming
interface is running PIM."
INDEX { snMspsPimStdIpMRouteAddrType, snMspsPimStdIpMRouteGroup, snMspsPimStdIpMRouteSource,
snMspsPimStdIpMRouteSourceMaskLen }
::= { snMspsPimStdIpMRouteTable 1 }
SnMspsPimStdIpMRouteEntry ::= SEQUENCE {
snMspsPimStdIpMRouteAddrType InetAddressType,
snMspsPimStdIpMRouteGroup InetAddress,
snMspsPimStdIpMRouteSource InetAddress,
snMspsPimStdIpMRouteSourceMaskLen Integer32,
snMspsPimStdIpMRouteUpstreamAssertTimer TimeTicks,
snMspsPimStdIpMRouteAssertMetric Integer32,
snMspsPimStdIpMRouteAssertMetricPref Integer32,
snMspsPimStdIpMRouteAssertRPTBit TruthValue,
snMspsPimStdIpMRouteFlags BITS
}
snMspsPimStdIpMRouteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP family in which the route belongs to."
::= { snMspsPimStdIpMRouteEntry 2 }
snMspsPimStdIpMRouteGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry
contains multicast routing information."
::= { snMspsPimStdIpMRouteEntry 3 }
snMspsPimStdIpMRouteSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRouteSourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { snMspsPimStdIpMRouteEntry 4 }
snMspsPimStdIpMRouteSourceMaskLen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRouteSource identifies the sources for which
this entry contains multicast routing information."
::= { snMspsPimStdIpMRouteEntry 5 }
snMspsPimStdIpMRouteUpstreamAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert has changed the
upstream neighbor away from the RPF neighbor."
::= { snMspsPimStdIpMRouteEntry 6 }
snMspsPimStdIpMRouteAssertMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received."
::= { snMspsPimStdIpMRouteEntry 7 }
snMspsPimStdIpMRouteAssertMetricPref OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect."
::= { snMspsPimStdIpMRouteEntry 8 }
snMspsPimStdIpMRouteAssertRPTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect."
::= { snMspsPimStdIpMRouteEntry 9 }
snMspsPimStdIpMRouteFlags OBJECT-TYPE
SYNTAX BITS {
rpt(0),
spt(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits."
::= { snMspsPimStdIpMRouteEntry 10 }
--
-- The PIM Next Hop Table
--
snMspsPimStdIpMRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdIpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB."
::= { snMspsPimStdTables 4 }
snMspsPimStdIpMRouteNextHopEntry OBJECT-TYPE
SYNTAX SnMspsPimStdIpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
ipMRouteNextHopState is pruned(1)."
INDEX { snMspsPimStdIpMRouteNextHopAddrType, snMspsPimStdIpMRouteNextHopGroup,
snMspsPimStdIpMRouteNextHopSource, snMspsPimStdIpMRouteNextHopSourceMaskLen,
snMspsPimStdIpMRouteNextHopIfIndex, snMspsPimStdIpMRouteNextHopAddress }
::= { snMspsPimStdIpMRouteNextHopTable 1 }
SnMspsPimStdIpMRouteNextHopEntry ::= SEQUENCE {
snMspsPimStdIpMRouteNextHopAddrType InetAddressType,
snMspsPimStdIpMRouteNextHopGroup InetAddress,
snMspsPimStdIpMRouteNextHopSource InetAddress,
snMspsPimStdIpMRouteNextHopSourceMaskLen Integer32,
snMspsPimStdIpMRouteNextHopIfIndex Integer32,
snMspsPimStdIpMRouteNextHopAddress InetAddress,
snMspsPimStdIpMRouteNextHopPruneReason INTEGER
}
snMspsPimStdIpMRouteNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP family in which the Next hop address belongs to."
::= { snMspsPimStdIpMRouteNextHopEntry 2 }
snMspsPimStdIpMRouteNextHopGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group for which this entry specifies a
next-hop on an outgoing interface."
::= { snMspsPimStdIpMRouteNextHopEntry 3 }
snMspsPimStdIpMRouteNextHopSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of snMspsPimCmnIpMRouteNextHopSourceMask identifies
the sources for which this entry specifies a next-hop on an
outgoing interface."
::= { snMspsPimStdIpMRouteNextHopEntry 4 }
snMspsPimStdIpMRouteNextHopSourceMaskLen OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of snMspsPimCmnIpMRouteNextHopSource identifies the sources for
which this entry specifies a next-hop on an outgoing interface"
::= { snMspsPimStdIpMRouteNextHopEntry 5 }
snMspsPimStdIpMRouteNextHopIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for the outgoing
interface for this next-hop."
::= { snMspsPimStdIpMRouteNextHopEntry 6 }
snMspsPimStdIpMRouteNextHopAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next-hop specific to this entry. For
most interfaces, this is identical to snMspsPimCmnIpMRouteNextHopGroup.
NBMA interfaces, however, may have multiple next-hop
addresses out a single outgoing interface."
::= { snMspsPimStdIpMRouteNextHopEntry 7 }
snMspsPimStdIpMRouteNextHopPruneReason OBJECT-TYPE
SYNTAX INTEGER {
other (1),
prune (2),
assert (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing."
::= { snMspsPimStdIpMRouteNextHopEntry 8 }
-- The PIM RP Table
snMspsPimStdRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdRPEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing PIM version 1 information
for the Rendezvous Points (RPs) for IP multicast groups.
This table is deprecated since its function is replaced by
the pimRPSetTable for PIM version 2."
::= { snMspsPimStdTables 5 }
snMspsPimStdRPEntry OBJECT-TYPE
SYNTAX SnMspsPimStdRPEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) in the pimRPTable. There is one
entry per RP address for each IP multicast group."
INDEX { snMspsPimStdRPAddrType, snMspsPimStdRPGroupAddress, snMspsPimStdRPAddress }
::= { snMspsPimStdRPTable 1 }
SnMspsPimStdRPEntry ::= SEQUENCE {
snMspsPimStdRPAddrType InetAddressType,
snMspsPimStdRPGroupAddress InetAddress,
snMspsPimStdRPAddress InetAddress,
snMspsPimStdRPState INTEGER,
snMspsPimStdRPStateTimer TimeTicks,
snMspsPimStdRPLastChange TimeTicks,
snMspsPimStdRPRowStatus RowStatus
}
snMspsPimStdRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address type in which the multicast group address,
and RP address belong to."
::= { snMspsPimStdRPEntry 1 }
snMspsPimStdRPGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP multicast group address for which this entry
contains information about an RP."
::= { snMspsPimStdRPEntry 2 }
snMspsPimStdRPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The unicast address of the RP."
::= { snMspsPimStdRPEntry 3 }
snMspsPimStdRPState OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The state of the RP."
::= { snMspsPimStdRPEntry 4 }
snMspsPimStdRPStateTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum time remaining before the next state change.
When pimRPState is up, this is the minimum time which must
expire until it can be declared down. When pimRPState is
down, this is the time until it will be declared up (in
order to retry)."
::= { snMspsPimStdRPEntry 5 }
snMspsPimStdRPLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of sysUpTime at the time when the corresponding
instance of pimRPState last changed its value."
::= { snMspsPimStdRPEntry 6 }
snMspsPimStdRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsPimStdRPEntry 7 }
-- The PIM RP-Set Table
snMspsPimStdRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements. When
the local router is not the BSR, this information is
obtained from received RP-Set messages."
::= { snMspsPimStdTables 6 }
snMspsPimStdRPSetEntry OBJECT-TYPE
SYNTAX SnMspsPimStdRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimRPSetTable."
INDEX { snMspsPimStdRPSetComponent, snMspsPimStdRPSetAddrType, snMspsPimStdRPSetGroupAddress,
snMspsPimStdRPSetGroupMaskLen, snMspsPimStdRPSetAddress }
::= { snMspsPimStdRPSetTable 1 }
SnMspsPimStdRPSetEntry ::= SEQUENCE {
snMspsPimStdRPSetAddrType InetAddressType,
snMspsPimStdRPSetGroupAddress InetAddress,
snMspsPimStdRPSetGroupMaskLen Integer32,
snMspsPimStdRPSetAddress InetAddress,
snMspsPimStdRPSetHoldTime Integer32,
snMspsPimStdRPSetExpiryTime TimeTicks,
snMspsPimStdRPSetComponent Integer32,
snMspsPimStdRPSetPimMode INTEGER
}
snMspsPimStdRPSetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type in which the RP address belongs to."
::= { snMspsPimStdRPSetEntry 1 }
snMspsPimStdRPSetGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address which, when combined with
pimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { snMspsPimStdRPSetEntry 2 }
snMspsPimStdRPSetGroupMaskLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address mask which, when combined with
pimRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { snMspsPimStdRPSetEntry 3 }
snMspsPimStdRPSetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the Candidate-RP."
::= { snMspsPimStdRPSetEntry 4 }
snMspsPimStdRPSetHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The holdtime of a Candidate-RP. If the local router is not
the BSR, this value is 0."
::= { snMspsPimStdRPSetEntry 5 }
snMspsPimStdRPSetExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before the Candidate-RP will be
declared down. If the local router is not the BSR, this
value is 0."
::= { snMspsPimStdRPSetEntry 6 }
snMspsPimStdRPSetComponent OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A number uniquely identifying the component. Each
protocol instance connected to a separate domain should have
a different index value."
::= { snMspsPimStdRPSetEntry 7 }
snMspsPimStdRPSetPimMode OBJECT-TYPE
SYNTAX INTEGER {
dm (1),
sm (2),
ssm (3),
bidir (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value shows the PIM mode in the RP set entry"
::= { snMspsPimStdRPSetEntry 11 }
--
-- Note: { pim 8 } through { pim 10 } were used in older versions
-- of this MIB. Since some earlier versions of this MIB have been
-- widely-deployed, these values must not be used in the future,
-- as long the MIB is rooted under { experimental 61 }.
--
-- The PIM Candidate-RP Table
snMspsPimStdCandidateRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of snMspsPimStdComponentCRPHoldTime is
non-zero. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of snMspsPimStdComponentCRPHoldTime is non-
zero)."
::= { snMspsPimStdTables 7 }
snMspsPimStdCandidateRPEntry OBJECT-TYPE
SYNTAX SnMspsPimStdCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimCandidateRPTable."
INDEX { snMspsPimStdCandidateRPAddrType,
snMspsPimStdCandidateRPGroupAddress,
snMspsPimStdCandidateRPGroupMaskLen }
::= { snMspsPimStdCandidateRPTable 1 }
SnMspsPimStdCandidateRPEntry ::= SEQUENCE {
snMspsPimStdCandidateRPAddrType InetAddressType,
snMspsPimStdCandidateRPGroupAddress InetAddress,
snMspsPimStdCandidateRPGroupMaskLen Integer32,
snMspsPimStdCandidateRPAddress InetAddress,
snMspsPimStdCandidateRPRowStatus RowStatus
}
snMspsPimStdCandidateRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address type in which the multicast group address,
and RP address belong to."
::= { snMspsPimStdCandidateRPEntry 1 }
snMspsPimStdCandidateRPGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address which, when combined with
pimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snMspsPimStdCandidateRPEntry 2 }
snMspsPimStdCandidateRPGroupMaskLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address mask which, when combined with
pimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snMspsPimStdCandidateRPEntry 3 }
snMspsPimStdCandidateRPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The (unicast) address of the interface which will be
advertised as a Candidate-RP."
::= { snMspsPimStdCandidateRPEntry 4 }
snMspsPimStdCandidateRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsPimStdCandidateRPEntry 5 }
-- The PIM Component Table
snMspsPimStdComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing objects specific to a PIM
domain. One row exists for each domain to which the router
is connected. A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain. This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them."
::= { snMspsPimStdTables 8 }
snMspsPimStdComponentEntry OBJECT-TYPE
SYNTAX SnMspsPimStdComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimComponentTable."
INDEX { snMspsPimStdComponentIndex }
::= { snMspsPimStdComponentTable 1 }
SnMspsPimStdComponentEntry ::= SEQUENCE {
snMspsPimStdComponentIndex Integer32,
snMspsPimStdComponentBSRExpiryTime TimeTicks,
snMspsPimStdComponentCRPHoldTime Integer32,
snMspsPimStdComponentStatus RowStatus,
snMspsPimStdComponentScopeZoneName DisplayString
}
snMspsPimStdComponentIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the component. Each protocol
instance connected to a separate domain should have a
different index value. Routers that only support membership
in a single PIM-SM domain should use a pimComponentIndex
value of 1."
::= { snMspsPimStdComponentEntry 1 }
snMspsPimStdComponentBSRExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before the bootstrap router in
the local domain will be declared down. For candidate BSRs,
this is the time until the component sends an RP-Set
message. For other routers, this is the time until it may
accept an RP-Set message from a lower candidate BSR."
::= { snMspsPimStdComponentEntry 2 }
snMspsPimStdComponentCRPHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The holdtime of the component when it is a candidate RP in
the local domain. The value of 0 is used to indicate that
the local system is not a Candidate-RP."
DEFVAL { 0 }
::= { snMspsPimStdComponentEntry 3 }
snMspsPimStdComponentStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry. Creating the entry creates
another protocol instance; destroying the entry disables a
protocol instance."
::= { snMspsPimStdComponentEntry 4 }
snMspsPimStdComponentScopeZoneName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the scope-zone associated with
a particular component"
::= { snMspsPimStdComponentEntry 5 }
snMspsPimStdComponentBSRTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdComponentBSREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing objects specific to a PIM
domain. One row exists for each domain to which the router
is connected. A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain. This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them."
::= { snMspsPimStdTables 9 }
snMspsPimStdComponentBSREntry OBJECT-TYPE
SYNTAX SnMspsPimStdComponentBSREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimComponentTable."
INDEX { snMspsPimStdComponentBSRIndex, snMspsPimStdComponentBSRAddrType}
::= { snMspsPimStdComponentBSRTable 1 }
SnMspsPimStdComponentBSREntry ::= SEQUENCE {
snMspsPimStdComponentBSRIndex Integer32,
snMspsPimStdComponentBSRAddrType InetAddressType,
snMspsPimStdComponentBSRAddress InetAddress
}
snMspsPimStdComponentBSRIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the component."
::= { snMspsPimStdComponentBSREntry 1 }
snMspsPimStdComponentBSRAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of the bootstrap router (BSR) for the local
PIM region."
::= { snMspsPimStdComponentBSREntry 2 }
snMspsPimStdComponentBSRAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the bootstrap router (BSR) for the local
PIM region."
::= { snMspsPimStdComponentBSREntry 3 }
--
-- The PIM Neighbor Secondary Address Table
--
snMspsPimStdNbrSecAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPimStdNbrSecAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the pimNeighborTable defined above)."
REFERENCE "RFC 4601 section 4.3.4"
::= { snMspsPimStdTables 10 }
snMspsPimStdNbrSecAddressEntry OBJECT-TYPE
SYNTAX SnMspsPimStdNbrSecAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the snMspsPimStdNbrSecAddressTable."
INDEX { snMspsPimStdNbrSecAddressIfIndex,
snMspsPimStdNbrSecAddressType,
snMspsPimStdNbrSecAddressPrimary,
snMspsPimStdNbrSecAddress }
::= { snMspsPimStdNbrSecAddressTable 1 }
SnMspsPimStdNbrSecAddressEntry ::= SEQUENCE {
snMspsPimStdNbrSecAddressIfIndex InterfaceIndex,
snMspsPimStdNbrSecAddressType InetAddressType,
snMspsPimStdNbrSecAddressPrimary InetAddress,
snMspsPimStdNbrSecAddress InetAddress
}
snMspsPimStdNbrSecAddressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM neighbor."
::= { snMspsPimStdNbrSecAddressEntry 1 }
snMspsPimStdNbrSecAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of this PIM neighbor."
::= { snMspsPimStdNbrSecAddressEntry 2 }
snMspsPimStdNbrSecAddressPrimary OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The primary IP address of this PIM neighbor. The
InetAddressType is given by the snMspsPimStdNbrSecAddressType
object."
::= { snMspsPimStdNbrSecAddressEntry 3 }
snMspsPimStdNbrSecAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|8|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary IP address of this PIM neighbor. The
InetAddressType is given by the snMspsPimStdNbrSecAddressType
object."
::= { snMspsPimStdNbrSecAddressEntry 4 }
-- End of PRIVATE MIB implementation of standard PIM MIB for supporting
-- both PIMv4 and PIMv6
snMspsMsdp OBJECT IDENTIFIER ::= { snMspsMsdpMIB 1 }
snMspsMsdpStat OBJECT IDENTIFIER ::= { snMspsMsdpMIB 2 }
snMspsMsdpTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Trace Statements in MSDP Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Trace. The bits represents the levels as
follows:
0 - Trace Disable,
1 - Management,
2 - Entry trace,
3 - Exit trace,
4 - Failure trace,
5 - All resources except buffer,
6 - Buffer,
7 - Input module trace,
8 - Output module trace,
9 - Peer module trace,
10 - cache module trace
The remaining bits are unused. The combination of levels are also allowed.
For example if the bits 1 and 2 are set, then the Trace
statements related to management and Data Path will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { snMspsMsdp 1 }
snMspsMsdpIPv4AdminStat OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of IPv4 MSDP on this MSDP speaker- globally enabled
or disabled. By default MSDP for IPv4 is disabled"
DEFVAL { 0 }
::= { snMspsMsdp 2 }
snMspsMsdpIPv6AdminStat OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of IPv6 MSDP on this MSDP speaker - globally enabled
or disabled. By default MSDP for IPv6 is disabled"
DEFVAL { 0 }
::= { snMspsMsdp 3 }
snMspsMsdpCacheLifetime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lifetime given to SA cache entries when created or
refreshed. This is the [SG-State-Period] in the MSDP
spec. A value of 0 means no SA caching is done by this
MSDP speaker.
This object does not measure time per se; instead, it
is the delta from the time at which an SA message is
received at which it should be expired if not refreshed.
(i.e., it is the value of snMspsMsdpSACacheExpiryTime
immediately after receiving an SA message applying to
that row.) As such, TimeInterval would be a more
appropriate SYNTAX; it remains TimeTicks for backwards
compatibility."
REFERENCE "RFC 3618 section 5.3"
DEFVAL { 0 }
::= { snMspsMsdp 4 }
snMspsMsdpNumSACacheEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the SA Cache table of MSDP."
::= { snMspsMsdp 5 }
snMspsMsdpMaxPeerSessions OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It defines the Maximum number of MSDP Peer sessions (TCP sessions)
that would be allowed simultaneously."
DEFVAL { 32 }
::= { snMspsMsdp 6 }
snMspsMsdpMappingComponentId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates the MRP(PIM) component on which the MSDP should work.
ie. Whenever the (*,G) Join is received in the
configured PIM compoment and MSDP is enabled, SA cache entry will be
searched in MSDP to get the Source Address"
DEFVAL { 1 }
::= { snMspsMsdp 7 }
snMspsMsdpListenerPort OBJECT-TYPE
SYNTAX Integer32 (639 |1024..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MSDP listens on this port for the TCP connection between
the remote peers. This port change will be effective for the
forthcoming connections, however the old Peers with old TCP
Port will be supported till the Peer goes down"
DEFVAL { 639 }
::= { snMspsMsdp 8 }
snMspsMsdpPeerFilter OBJECT-TYPE
SYNTAX INTEGER {
acceptall (1),
denyall (0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the status of peer filter globally configured. This can
be Accept all peers or Deny all Peers. If the status is acceptall,
all the Peer connections are accepted if no route map is configured
in PEER FILTER TABLE. If the routemap is configured, the action taken
based on the routemap rule."
DEFVAL { 1 }
::= { snMspsMsdp 9 }
snMspsMsdpPeerCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of configured Peers."
::= { snMspsMsdp 10 }
snMspsMsdpStatEstPeerCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of established Peers."
::= { snMspsMsdpStat 1 }
------------
-- SCALAR_TABLE_END snMspsMsdp
------------
--
-- The MSDP Peer table
--
snMspsMsdpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP speaker's peers. This table
is common for IPv4 and IPv6 Peers"
::= { snMspsMsdp 11 }
snMspsMsdpPeerEntry OBJECT-TYPE
SYNTAX SnMspsMsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP peer."
INDEX { snMspsMsdpPeerAddrType, snMspsMsdpPeerRemoteAddress }
::= { snMspsMsdpPeerTable 1 }
SnMspsMsdpPeerEntry ::= SEQUENCE {
snMspsMsdpPeerAddrType InetAddressType,
snMspsMsdpPeerRemoteAddress InetAddress,
snMspsMsdpPeerState INTEGER,
snMspsMsdpPeerRPFFailures Counter32,
snMspsMsdpPeerInSAs Counter32,
snMspsMsdpPeerOutSAs Counter32,
snMspsMsdpPeerInSARequests Counter32,
snMspsMsdpPeerOutSARequests Counter32,
snMspsMsdpPeerInControlMessages Counter32,
snMspsMsdpPeerOutControlMessages Counter32,
snMspsMsdpPeerInDataPackets Counter32,
snMspsMsdpPeerOutDataPackets Counter32,
snMspsMsdpPeerFsmEstablishedTransitions Counter32,
snMspsMsdpPeerFsmEstablishedTime TimeStamp,
snMspsMsdpPeerInMessageTime TimeStamp,
snMspsMsdpPeerLocalAddress InetAddress,
snMspsMsdpPeerConnectRetryInterval Integer32,
snMspsMsdpPeerHoldTimeConfigured Integer32,
snMspsMsdpPeerKeepAliveConfigured Integer32,
snMspsMsdpPeerDataTtl Integer32,
snMspsMsdpPeerStatus RowStatus,
snMspsMsdpPeerRemotePort Integer32,
snMspsMsdpPeerLocalPort Integer32,
snMspsMsdpPeerEncapsulationType INTEGER,
snMspsMsdpPeerConnectionAttempts Counter32,
snMspsMsdpPeerDiscontinuityTime TimeStamp,
snMspsMsdpPeerMD5AuthPassword DisplayString,
snMspsMsdpPeerMD5AuthPwdStat INTEGER,
snMspsMsdpPeerMD5FailCount Integer32,
snMspsMsdpPeerMD5SuccessCount Integer32,
snMspsMsdpPeerInSAResponses Counter32,
snMspsMsdpPeerOutSAResponses Counter32,
snMspsMsdpPeerUpTime TimeTicks,
snMspsMsdpPeerInKeepAliveCount Counter32,
snMspsMsdpPeerOutKeepAliveCount Counter32,
snMspsMsdpPeerDataTtlErrorCount Counter32,
snMspsMsdpPeerAdminStatus INTEGER
}
snMspsMsdpPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type for which this entry
contains information."
::= { snMspsMsdpPeerEntry 1 }
snMspsMsdpPeerRemoteAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the remote MSDP peer."
::= { snMspsMsdpPeerEntry 2 }
snMspsMsdpPeerState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
listen(2),
connecting(3),
established(4),
disabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the MSDP TCP connection with this peer."
::= { snMspsMsdpPeerEntry 3 }
snMspsMsdpPeerRPFFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SA messages received from this peer that
failed the Peer-RPF check.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 4 }
snMspsMsdpPeerInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 5 }
snMspsMsdpPeerOutSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages transmitted on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 6 }
snMspsMsdpPeerInSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 7 }
snMspsMsdpPeerOutSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages transmitted on
this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 8 }
snMspsMsdpPeerInControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages, excluding encapsulated
data packets, received on this TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 9 }
snMspsMsdpPeerOutControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages, excluding encapsulated
data packets, transmitted on this TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 10 }
snMspsMsdpPeerInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets received
from this peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 11 }
snMspsMsdpPeerOutDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets sent to
this peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 12 }
snMspsMsdpPeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the MSDP FSM transitioned into
the ESTABLISHED state."
REFERENCE "RFC 3618 section 11"
::= { snMspsMsdpPeerEntry 13 }
snMspsMsdpPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timestamp is set to the value of sysUpTime when a
peer transitions into or out of the ESTABLISHED state.
It is set to zero when the MSDP speaker is booted."
REFERENCE "RFC 3618 section 11"
::= { snMspsMsdpPeerEntry 14 }
snMspsMsdpPeerInMessageTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime value when the last MSDP message was
received from the peer. It is set to zero when the MSDP
speaker is booted."
::= { snMspsMsdpPeerEntry 15 }
snMspsMsdpPeerLocalAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local IP address used for this entry's MSDP TCP
connection."
::= { snMspsMsdpPeerEntry 16 }
snMspsMsdpPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval, in seconds, for the [ConnectRetry-period]
for this peer."
REFERENCE "RFC 3618 section 5.6"
DEFVAL { 30 }
::= { snMspsMsdpPeerEntry 17 }
snMspsMsdpPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 (0|3..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval, in seconds, for the [HoldTime-Period]
configured for this MSDP speaker with this peer. If the
value of this object is zero (0), the MSDP connection is
never torn down due to the absence of messages from the
peer."
REFERENCE "RFC 3618 section 5.4"
DEFVAL { 75 }
::= { snMspsMsdpPeerEntry 18 }
snMspsMsdpPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Integer32 (0|1..21845)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval, in seconds, for the [KeepAlive-Period]
configured for this MSDP speaker with this peer. If the
value of this object is zero (0), no periodic KEEPALIVE
messages are sent to the peer after the MSDP connection
has been established."
REFERENCE "RFC 3618 section 5.5"
DEFVAL { 60 }
::= { snMspsMsdpPeerEntry 19 }
snMspsMsdpPeerDataTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum TTL a packet is required to have before it
may be forwarded using SA encapsulation to this peer."
DEFVAL { 1 }
::= { snMspsMsdpPeerEntry 20 }
snMspsMsdpPeerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated.
Care should be used in providing write access to this
object without adequate authentication.
snMspsMsdpPeerRemoteAddress is the only variable that must be
set to a valid value before the row can be activated.
Since this is the table's INDEX, a row can be activated
by simply setting the snMspsMsdpPeerStatus variable.
It is possible to modify other columns in the same
conceptual row when the status value is active(1)."
REFERENCE "RFC 3618 section 11.1"
::= { snMspsMsdpPeerEntry 21 }
snMspsMsdpPeerRemotePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the MSDP
peers."
DEFVAL { 639 }
::= { snMspsMsdpPeerEntry 22 }
snMspsMsdpPeerLocalPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the MSDP
peers."
DEFVAL { 639 }
::= { snMspsMsdpPeerEntry 23 }
snMspsMsdpPeerEncapsulationType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
tcp(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The encapsulation in use when encapsulating data in SA
messages to this peer."
::= { snMspsMsdpPeerEntry 24 }
snMspsMsdpPeerConnectionAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the state machine has transitioned
from INACTIVE to CONNECTING."
::= { snMspsMsdpPeerEntry 25 }
snMspsMsdpPeerDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which one or more of this entry's counters suffered a
discontinuity. See the DESCRIPTION of each object to see
if it is expected to have discontinuities. These
discontinuities may occur at peer connection
establishment.
If no such discontinuities have occurred since the last
reinitialization of the local management subsystem, then
this object contains a zero value."
::= { snMspsMsdpPeerEntry 26 }
snMspsMsdpPeerMD5AuthPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP MD5 Authentication Password that has to be sent with all TCP
packets originated from the peer."
::= { snMspsMsdpPeerEntry 27 }
snMspsMsdpPeerMD5AuthPwdStat OBJECT-TYPE
SYNTAX INTEGER
{
disabled (0),
enabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates whether TCP MD5 password needs to be enabled/disabled
for the peer."
DEFVAL { disabled }
::= { snMspsMsdpPeerEntry 28 }
snMspsMsdpPeerMD5FailCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of times the MD5 authentication has failed"
::= { snMspsMsdpPeerEntry 29 }
snMspsMsdpPeerMD5SuccessCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of times the MD5 authentication has succeeded"
::= { snMspsMsdpPeerEntry 30 }
snMspsMsdpPeerInSAResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Response messages received on
this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 31 }
snMspsMsdpPeerOutSAResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Response messages transmitted on
this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 32 }
snMspsMsdpPeerUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was first placed in the Peer
Table.
The first epoch is the time that the entry was first
placed in the Peer table, and the second epoch is the
current time."
::= { snMspsMsdpPeerEntry 33 }
snMspsMsdpPeerInKeepAliveCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP KeepAlive messages received on
this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 34 }
snMspsMsdpPeerOutKeepAliveCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP KeepAlive messages transmitted on
this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 35 }
snMspsMsdpPeerDataTtlErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP data Packets dropped as received TTL is invalid
for this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
snMspsMsdpPeerDiscontinuityTime."
::= { snMspsMsdpPeerEntry 36 }
snMspsMsdpPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
established(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The is the admin state of the MSDP peer."
::= { snMspsMsdpPeerEntry 37 }
--
-- The MSDP Source-Active Cache table
--
snMspsMsdpSACacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP SA advertisements
currently in the MSDP speaker's cache."
::= { snMspsMsdp 12 }
snMspsMsdpSACacheEntry OBJECT-TYPE
SYNTAX SnMspsMsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP SA
advertisement. The Index to this table includes
snMspsMsdpSACacheOriginRP for diagnosing incorrect MSDP
advertisements; normally, a Group and Source pair would
be unique. Row creation is not permitted;
snMspsMsdpSACacheStatus may only be used to delete rows
from this table."
INDEX { snMspsMsdpSACacheAddrType,snMspsMsdpSACacheGroupAddr,
snMspsMsdpSACacheSourceAddr,snMspsMsdpSACacheOriginRP }
::= { snMspsMsdpSACacheTable 1 }
SnMspsMsdpSACacheEntry ::= SEQUENCE {
snMspsMsdpSACacheAddrType InetAddressType,
snMspsMsdpSACacheGroupAddr InetAddress,
snMspsMsdpSACacheSourceAddr InetAddress,
snMspsMsdpSACacheOriginRP InetAddress,
snMspsMsdpSACachePeerLearnedFrom InetAddress,
snMspsMsdpSACacheRPFPeer InetAddress,
snMspsMsdpSACacheInSAs Counter32,
snMspsMsdpSACacheInDataPackets Counter32,
snMspsMsdpSACacheUpTime TimeTicks,
snMspsMsdpSACacheExpiryTime TimeTicks,
snMspsMsdpSACacheStatus RowStatus
}
snMspsMsdpSACacheAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type for which this entry
contains information."
::= { snMspsMsdpSACacheEntry 1 }
snMspsMsdpSACacheGroupAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address of the SA Cache entry."
::= { snMspsMsdpSACacheEntry 2 }
snMspsMsdpSACacheSourceAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address of the SA Cache entry."
::= { snMspsMsdpSACacheEntry 3 }
snMspsMsdpSACacheOriginRP OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RP of the SA Cache entry. This field is in the index
in order to catch multiple RP's advertising the same
source and group."
::= { snMspsMsdpSACacheEntry 4 }
snMspsMsdpSACachePeerLearnedFrom OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which this SA Cache entry was last
accepted. This address must correspond to the
snMspsMsdpPeerRemoteAddress value for a row in the MSDP Peer
Table. This should be all zeros on the router that
originated the entry."
::= { snMspsMsdpSACacheEntry 5 }
snMspsMsdpSACacheRPFPeer OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which an SA message corresponding to this
cache entry would be accepted (i.e., the RPF peer for
snMspsMsdpSACacheOriginRP). This may be different than
snMspsMsdpSACachePeerLearnedFrom if this entry was created by
an MSDP SA-Response. This address must correspond to
the snMspsMsdpPeerRemoteAddress value for a row in the MSDP
Peer Table, or it may be all zeros if no RPF peer exists."
::= { snMspsMsdpSACacheEntry 6 }
snMspsMsdpSACacheInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received relevant to this
cache entry. This object must be initialized to zero
when creating a cache entry."
::= { snMspsMsdpSACacheEntry 7 }
snMspsMsdpSACacheInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP-encapsulated data packets received
relevant to this cache entry. This object must be
initialized to zero when creating a cache entry."
::= { snMspsMsdpSACacheEntry 8 }
snMspsMsdpSACacheUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was first placed in the SA
cache.
The first epoch is the time that the entry was first
placed in the SA cache, and the second epoch is the
current time."
::= { snMspsMsdpSACacheEntry 9 }
snMspsMsdpSACacheExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before this entry will expire from
the SA cache.
The first epoch is now, and the second epoch is the time
that the entry will expire."
::= { snMspsMsdpSACacheEntry 10 }
snMspsMsdpSACacheStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), destroy(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row in the table. The only allowable
actions are to retrieve the status, which will be 'active',
or to set the status to 'destroy' in order to remove
this entry from the cache.
Row creation is not permitted.
No columnar objects are writable, so there are none that
may be changed while the status value is active(1)."
::= { snMspsMsdpSACacheEntry 11 }
--
-- MSDP Mesh Group Membership table
--
snMspsMsdpMeshGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMsdpMeshGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing MSDP Mesh Group
configuration."
::= { snMspsMsdp 13 }
snMspsMsdpMeshGroupEntry OBJECT-TYPE
SYNTAX SnMspsMsdpMeshGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a peer in an MSDP
Mesh Group.
If row creation is supported, dynamically added rows are
added to the system's stable configuration
(corresponding to a StorageType value of nonVolatile)."
INDEX { snMspsMsdpMeshGroupName,snMspsMsdpMeshGroupAddrType,
snMspsMsdpMeshGroupPeerAddress }
::= { snMspsMsdpMeshGroupTable 1 }
SnMspsMsdpMeshGroupEntry ::= SEQUENCE {
snMspsMsdpMeshGroupName DisplayString,
snMspsMsdpMeshGroupAddrType InetAddressType,
snMspsMsdpMeshGroupPeerAddress InetAddress,
snMspsMsdpMeshGroupStatus RowStatus
}
snMspsMsdpMeshGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the mesh group."
::= { snMspsMsdpMeshGroupEntry 1 }
snMspsMsdpMeshGroupAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type for which this entry
contains information."
::= { snMspsMsdpMeshGroupEntry 2 }
snMspsMsdpMeshGroupPeerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A peer address that is a member of the mesh group with
name snMspsMsdpMeshGroupName. The snMspsMsdpMeshGroupPeerAddress
must match a row in the snMspsMsdpPeerTable."
::= { snMspsMsdpMeshGroupEntry 3 }
snMspsMsdpMeshGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This entry's status, by which new entries may be added
to the table and old entries deleted.
snMspsMsdpMeshGroupName and snMspsMsdpMeshGroupPeerAddress must be
set to valid values before the row can be activated.
Since these are the table's INDEX, a row can be activated
by simply setting the snMspsMsdpMeshGroupStatus variable.
It is not possible to modify other columns in the same
conceptual row when the status value is active(1),
because the only other objects in the row are part
of the index. Changing one of these changes the row,
so an old row must be deleted and a new one created."
::= { snMspsMsdpMeshGroupEntry 4 }
--
-- MSDP RP Table
--
snMspsMsdpRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMsdpRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing MSDP RP Address
configurations. This address is used MSDP SA messages
as a Initiator RP."
::= { snMspsMsdp 14 }
snMspsMsdpRPEntry OBJECT-TYPE
SYNTAX SnMspsMsdpRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing the RP Address
to be used in SA messages."
INDEX { snMspsMsdpRPAddrType }
::= { snMspsMsdpRPTable 1 }
SnMspsMsdpRPEntry ::= SEQUENCE {
snMspsMsdpRPAddrType InetAddressType,
snMspsMsdpRPAddress InetAddress,
snMspsMsdpRPOperStatus INTEGER,
snMspsMsdpRPStatus RowStatus
}
snMspsMsdpRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type for which this entry
contains information."
::= { snMspsMsdpRPEntry 1 }
snMspsMsdpRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RP Address which will be present in the
SA message sent from this router."
::= { snMspsMsdpRPEntry 2 }
snMspsMsdpRPOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the interface oper status."
::= { snMspsMsdpRPEntry 3 }
snMspsMsdpRPStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the status of the (conceptual Row).
The only possible activity is making the row active.
This row cannot be destroyed ever."
::= { snMspsMsdpRPEntry 4 }
--
-- MSDP Peer Filter Table
--
snMspsMsdpPeerFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMsdpPeerFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing MSDP Peer filtering
configurations. The Peer connections can be accepted
or denied based on this filter configuration."
::= { snMspsMsdp 15 }
snMspsMsdpPeerFilterEntry OBJECT-TYPE
SYNTAX SnMspsMsdpPeerFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing the filter
Accept/Reject connection) applied to an MSDP Remote peer."
INDEX { snMspsMsdpPeerFilterAddrType }
::= { snMspsMsdpPeerFilterTable 1 }
SnMspsMsdpPeerFilterEntry ::= SEQUENCE {
snMspsMsdpPeerFilterAddrType InetAddressType,
snMspsMsdpPeerFilterRouteMap DisplayString,
snMspsMsdpPeerFilterStatus RowStatus
}
snMspsMsdpPeerFilterAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type for which this entry
contains information."
::= { snMspsMsdpPeerFilterEntry 1 }
snMspsMsdpPeerFilterRouteMap OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the route map which is to be applied for filtering the peer.
Before configuring this table, a route map with this string
should be configured with proper permissions (accept/deny)"
::= { snMspsMsdpPeerFilterEntry 2 }
snMspsMsdpPeerFilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the status of the configured routemap
This can be enabled or disabled. If status is enabled,
the filter will be applied for the peers
using the routemap configured, else the routemap is not used"
::= { snMspsMsdpPeerFilterEntry 3 }
--
-- MSDP SA Redistribution Table
--
snMspsMsdpSARedistributionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMsdpSARedistributionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing MSDP SA filtering
configurations. "
::= { snMspsMsdp 16 }
snMspsMsdpSARedistributionEntry OBJECT-TYPE
SYNTAX SnMspsMsdpSARedistributionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing the filter
applied to either Source or Group or
any of the combinations of Source and Group for
preventing the SA message advertisement from the
originating RP."
INDEX { snMspsMsdpSARedistributionAddrType }
::= { snMspsMsdpSARedistributionTable 1 }
SnMspsMsdpSARedistributionEntry ::= SEQUENCE {
snMspsMsdpSARedistributionAddrType InetAddressType,
snMspsMsdpSARedistributionStatus RowStatus,
snMspsMsdpSARedistributionRouteMap DisplayString,
snMspsMsdpSARedistributionRouteMapStat INTEGER
}
snMspsMsdpSARedistributionAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type for which this entry
contains information."
::= { snMspsMsdpSARedistributionEntry 1 }
snMspsMsdpSARedistributionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the redistribution status of the SA messages .
If it is enabled and the value of snMspsMsdpSARedistributionRouteMap
is NULL, then all SA messages are redistributed by the originator.
Else if it is enabled and the value of snMspsMsdpSARedistributionRouteMap
is NOT NULL,then SA message redistribution is based on the
routemap snMspsMsdpSARedistributionRouteMap configured.
If it is disabled ,no SA messages are redistributed."
::= { snMspsMsdpSARedistributionEntry 2 }
snMspsMsdpSARedistributionRouteMap OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the route map which is to be applied for filtering
the SA messages at originating RP.
Before configuring this field, a route map with this string
should be configured with proper permissions"
::= { snMspsMsdpSARedistributionEntry 3 }
snMspsMsdpSARedistributionRouteMapStat OBJECT-TYPE
SYNTAX INTEGER{
disabled (0),
enabled (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the status of the configured routemap
- enabled or disabled.
If status is enabled,the filter will be applied for the SA messages
using the routemap configured, else does nothing"
DEFVAL { 0 }
::= { snMspsMsdpSARedistributionEntry 4 }
----
-- Traps
----
snMspsMsdpRtrId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" The MIB object snMspsMsdpRtrId,is the configured Router-Id for the
router.This ID is obtained from IP module"
::= { snMspsMsdp 17 }
snMspsMsdpTraps OBJECT IDENTIFIER ::= { snMspsMsdp 0 }
snMspsMsdpEstablished NOTIFICATION-TYPE
OBJECTS { snMspsMsdpRtrId,
snMspsMsdpPeerFsmEstablishedTransitions }
STATUS deprecated
DESCRIPTION
"The MSDP Established event is generated when the MSDP FSM
enters the ESTABLISHED state."
::= { snMspsMsdpTraps 1 }
snMspsMsdpBackwardTransition NOTIFICATION-TYPE
OBJECTS { snMspsMsdpRtrId,
snMspsMsdpPeerState }
STATUS deprecated
DESCRIPTION
"The MSDPBackwardTransition Event is generated when the
MSDP FSM moves from a higher-numbered state to a
lower-numbered state."
::= { snMspsMsdpTraps 2 }
snMspsMsdpRPOperStatusChange NOTIFICATION-TYPE
OBJECTS { snMspsMsdpRtrId,
snMspsMsdpRPOperStatus }
STATUS deprecated
DESCRIPTION
"The snMspsMsdpRPOperStatus Event is generated when the MSDP
RP's Oper Status changes from one state to other."
::= { snMspsMsdpTraps 3 }
snMspsMgmd OBJECT IDENTIFIER ::= { snMspsMgmdMIB 1 }
snMspsMgmdIgmpGlobalStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the global status of
the IGMP protocol in the router. It must be
made up for protocol functioning.Making this
object 'disabled' will remove all dynamic multicast
entries stop all the timers for route entries and
disables IGMP on all the IGMP enabled interfaces.
Default value of this entry will be 'disabled'."
DEFVAL { disabled }
::= { snMspsMgmd 1 }
snMspsMgmdIgmpTraceLevel OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Trace Statements in IGMP Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Trace. The bits represents the levels as
follows: 0 - Management, 1 - Data Path, 2 - Control Plane,
3 - Rx, 4 - Tx, 5 - All Failures. The remaining
bits are unused. The combination of levels are also allowed.
For example if the bits 1 and 2 are set, then the Trace
statements related to Data Path and Control Plane will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { snMspsMgmd 2 }
snMspsMgmdIgmpDebugLevel OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Trace Statements in IGMP Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Trace. The bits represents the levels as
follows:0 - I/o, 1 - Group, 2 - Query,
3 - Timer, 4 - NP, 5 - Init Shut, 6 - OS resources, 7 - Buffer,
8 - Management,9 - Entry, 10 - Exit. The remaining bits are unused.
The combination of levels are also allowed.
For example if the bits 1 and 2 are set, then the Debug
statements related to Group and Query will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { snMspsMgmd 3 }
snMspsMgmdMldGlobalStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the global status of
the MLD protocol in the router. It must be
made up for protocol functioning.Making this
object 'disabled' will remove all dynamic multicast
entries stop all the timers for route entries and
disables MLD on all the IGMP enabled interfaces.
Default value of this entry will be 'disabled'."
DEFVAL { disabled }
::= { snMspsMgmd 4 }
snMspsMgmdMldTraceLevel OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is used to enable Trace Statements in IGMP Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Trace. The bits represents the levels as
follows: 0 - Data Path, 1 - Control Plane,
2 - Rx, 3 - Tx, 4 - All Failures. The remaining
bits are unused. The combination of levels are also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Data Path and Control Plane will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { snMspsMgmd 5 }
snMspsMgmdMldDebugLevel OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to enable Debug Statements in IGMP Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represents
a level of Debug. The bits represents the levels as
follows:0 - I/o, 1 - Group, 2 - Query,
3 - Timer, 4 - NP, 5 - Init Shut, 6 - OS resources, 7 - Buffer,
8 - Entry, 9 - Exit. The remaining bits are unused. The combination
of levels are also allowed.
For example if the bits 1 and 2 are set, then the Debug
statements related to Group and Query will be printed.
The administrator have to enter the corresponding integer value
for the bits set. For example if bits 1 and 2 are set then
admin has to give the value 6."
DEFVAL { 0 }
::= { snMspsMgmd 6 }
snMspsMgmdGlobalLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the total number of multicast groups can be allowed.This support is for IGMPv1, IGMPv2 IGMPv3 only"
::= { snMspsMgmd 7 }
snMspsMgmdGlobalCurGrpCount OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the current count of groups that were added. If this reaches to snMspsMgmdGlobalLimit no membership reports will be honored for any interface."
::= { snMspsMgmd 8 }
-- SCALAR_TABLE_END snMspsMgmd
-- ************************************************
-- MGMD INTERFACE TABLE
-- ************************************************
snMspsMgmdInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMgmdInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the MGMD Statistic information
for all the ports in the system."
::= { snMspsMgmd 9 }
snMspsMgmdInterfaceEntry OBJECT-TYPE
SYNTAX SnMspsMgmdInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the necessary information of MGMD
statistics on a logical interface."
INDEX { snMspsMgmdInterfaceIfIndex, snMspsMgmdInterfaceAddrType }
::= { snMspsMgmdInterfaceTable 1 }
SnMspsMgmdInterfaceEntry ::=
SEQUENCE {
snMspsMgmdInterfaceIfIndex InterfaceIndex,
snMspsMgmdInterfaceAddrType InetAddressType,
snMspsMgmdInterfaceAdminStatus INTEGER,
snMspsMgmdInterfaceFastLeaveStatus INTEGER,
snMspsMgmdInterfaceOperStatus INTEGER,
snMspsMgmdInterfaceIncomingPkts Counter32,
snMspsMgmdInterfaceIncomingJoins Counter32,
snMspsMgmdInterfaceIncomingLeaves Counter32,
snMspsMgmdInterfaceIncomingQueries Counter32,
snMspsMgmdInterfaceOutgoingQueries Counter32,
snMspsMgmdInterfaceRxGenQueries Counter32,
snMspsMgmdInterfaceRxGrpQueries Counter32,
snMspsMgmdInterfaceRxGrpAndSrcQueries Counter32,
snMspsMgmdInterfaceRxIgmpv1v2Reports Counter32,
snMspsMgmdInterfaceRxIgmpv3Reports Counter32,
snMspsMgmdInterfaceRxMldv1Reports Counter32,
snMspsMgmdInterfaceRxMldv2Reports Counter32,
snMspsMgmdInterfaceTxGenQueries Counter32,
snMspsMgmdInterfaceTxGrpQueries Counter32,
snMspsMgmdInterfaceTxGrpAndSrcQueries Counter32,
snMspsMgmdInterfaceTxIgmpv1v2Reports Counter32,
snMspsMgmdInterfaceTxIgmpv3Reports Counter32,
snMspsMgmdInterfaceTxMldv1Reports Counter32,
snMspsMgmdInterfaceTxMldv2Reports Counter32,
snMspsMgmdInterfaceTxLeaves Counter32,
snMspsMgmdInterfaceChannelTrackStatus INTEGER,
snMspsMgmdInterfaceGroupListId Unsigned32,
snMspsMgmdInterfaceLimit Unsigned32,
snMspsMgmdInterfaceCurGrpCount Unsigned32,
snMspsMgmdInterfaceCKSumError Counter32,
snMspsMgmdInterfacePktLenError Counter32,
snMspsMgmdInterfacePktsWithLocalIP Counter32,
snMspsMgmdInterfaceSubnetCheckFailure Counter32,
snMspsMgmdInterfaceQryFromNonQuerier Counter32,
snMspsMgmdInterfaceReportVersionMisMatch Counter32,
snMspsMgmdInterfaceQryVersionMisMatch Counter32,
snMspsMgmdInterfaceUnknownMsgType Counter32,
snMspsMgmdInterfaceInvalidV1Report Counter32,
snMspsMgmdInterfaceInvalidV2Report Counter32,
snMspsMgmdInterfaceInvalidV3Report Counter32,
snMspsMgmdInterfaceRouterAlertCheckFailure Counter32,
snMspsMgmdInterfaceIncomingSSMPkts Counter32,
snMspsMgmdInterfaceInvalidSSMPkts Counter32,
snMspsMgmdInterfaceJoinPktRate Integer32,
snMspsMgmdInterfaceMalformedPkts Counter32,
snMspsMgmdInterfaceSocketErrors Counter32,
snMspsMgmdInterfaceBadScopeErrors Counter32
}
snMspsMgmdInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which IGMP or MLD
is enabled. The table is indexed by the ifIndex value and
the InetAddressType to allow for interfaces that may be
configured in both IPv4 and IPv6 modes."
::= { snMspsMgmdInterfaceEntry 1 }
snMspsMgmdInterfaceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of this interface. This entry along with
the ifIndex value acts as the index to the
snMspsMgmdInterface table. A physical interface may be
configured in multiple modes concurrently, e.g., in IPv4
and IPv6 modes connected to the same interface; however,
the traffic is considered to be logically separate."
::= { snMspsMgmdInterfaceEntry 2 }
snMspsMgmdInterfaceAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This gives the Administrative Status of the Interface."
DEFVAL { up }
::= { snMspsMgmdInterfaceEntry 3 }
snMspsMgmdInterfaceFastLeaveStatus OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the fast leave feature of the
IGMPV3 or MLDv2 protocol. Making this object 'enable'
supports immediate intimation to the Multicast Routing
Protocol on the last member leaving the Group.
Making this object 'disable' will not support fast leave
support. Default value of this entry will
be 'disable'. This must be enabled only on those interfaces
where there is single host. This can also be enabled on
those interfaces having more than one hosts only if all are
IGMPv3/MLDv2 hosts in IGMPV3/MLDv2 Mode. "
DEFVAL { disable }
::= { snMspsMgmdInterfaceEntry 4 }
snMspsMgmdInterfaceOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Operational Status of the Interface."
::= { snMspsMgmdInterfaceEntry 5 }
snMspsMgmdInterfaceIncomingPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP/MLD Packets received by the router"
::= { snMspsMgmdInterfaceEntry 6 }
snMspsMgmdInterfaceIncomingJoins OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total Incoming JoinGroupMessage counter."
::= { snMspsMgmdInterfaceEntry 7 }
snMspsMgmdInterfaceIncomingLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total Incoming LeaveGroupMessage counter."
::= { snMspsMgmdInterfaceEntry 8 }
snMspsMgmdInterfaceIncomingQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total Incoming Queries counter."
::= { snMspsMgmdInterfaceEntry 9 }
snMspsMgmdInterfaceOutgoingQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total Outgoing Queries counter."
::= { snMspsMgmdInterfaceEntry 10 }
snMspsMgmdInterfaceRxGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of General Queries received on this
interface."
::= { snMspsMgmdInterfaceEntry 11 }
snMspsMgmdInterfaceRxGrpQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Group specific queries received
on this interface. This object is specific to MGMD Proxy
implementation."
::= { snMspsMgmdInterfaceEntry 12 }
snMspsMgmdInterfaceRxGrpAndSrcQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Group and source specific
queries received on this interface. This object is specific
to MGMD Proxy implementation."
::= { snMspsMgmdInterfaceEntry 13 }
snMspsMgmdInterfaceRxIgmpv1v2Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IGMPv1 and IGMPv2 reports
reports received on this interface."
::= { snMspsMgmdInterfaceEntry 14 }
snMspsMgmdInterfaceRxIgmpv3Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IGMPv3 reports
received on this interface."
::= { snMspsMgmdInterfaceEntry 15 }
snMspsMgmdInterfaceRxMldv1Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MLDv1 reports
reports received on this interface."
::= { snMspsMgmdInterfaceEntry 16 }
snMspsMgmdInterfaceRxMldv2Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MLDv2 reports
received on this interface."
::= { snMspsMgmdInterfaceEntry 17 }
snMspsMgmdInterfaceTxGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of General queries sent on this
interface."
::= { snMspsMgmdInterfaceEntry 18 }
snMspsMgmdInterfaceTxGrpQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Group specific queries sent
on this interface."
::= { snMspsMgmdInterfaceEntry 19 }
snMspsMgmdInterfaceTxGrpAndSrcQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Group and source specific
queries sent on this interface."
::= { snMspsMgmdInterfaceEntry 20 }
snMspsMgmdInterfaceTxIgmpv1v2Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IGMP v1/v2 reports
sent on this interface. This object is specific
to MGMD Proxy implementation."
::= { snMspsMgmdInterfaceEntry 21 }
snMspsMgmdInterfaceTxIgmpv3Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IGMPv3 reports
sent on this interface. This object is specific to MGMD
Proxy implementation."
::= { snMspsMgmdInterfaceEntry 22 }
snMspsMgmdInterfaceTxMldv1Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MLD v1 reports
sent on this interface. This object is specific
to MGMD Proxy implementation."
::= { snMspsMgmdInterfaceEntry 23 }
snMspsMgmdInterfaceTxMldv2Reports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MLDv2 reports
sent on this interface. This object is specific to MGMD
Proxy implementation."
::= { snMspsMgmdInterfaceEntry 24 }
snMspsMgmdInterfaceTxLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IGMPv2 leaves or MLDv1 leaves sent on
this interface. This object is specific to MGMD Proxy
implementation."
::= { snMspsMgmdInterfaceEntry 25 }
snMspsMgmdInterfaceChannelTrackStatus OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the explicit channel tracking
feature of the IGPMV3 protocol. Configuring this object as
'enable' makes the router to keep track of each individual
host that is joined to a particular multicast group or channel.
Making this object 'disable' will not support explicit channel
tracking feature support. Default value of this entry will
be 'disable'.
This must be enabled only on IGMPv3 interfaces."
DEFVAL { disable }
::= { snMspsMgmdInterfaceEntry 26 }
snMspsMgmdInterfaceGroupListId OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicate multicast GroupList Id mapped to this interface.This grouplist will be exempted for limiting on this interface. Grouplist support is provided for IGMPv1, IGMPv2 IGMPv3 only."
::= { snMspsMgmdInterfaceEntry 27 }
snMspsMgmdInterfaceLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the total number of multicast groups can be allowed for this interface.If snMspsMgmdInterfaceCurGrpCount reaches this InterfaceLimit then no membership reports will be honored on this interface except the grouplist mapped to this interface.This feature supports for IGMPv1, IGMPv2 IGMPv3 only."
::= { snMspsMgmdInterfaceEntry 28 }
snMspsMgmdInterfaceCurGrpCount OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the current count of multicast groups that were added to
the interface.This counter will be incremented for each valid membership
report on this interface and decremented for leave report."
::= { snMspsMgmdInterfaceEntry 29 }
snMspsMgmdInterfaceCKSumError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets received with checksum error on an interface."
::= { snMspsMgmdInterfaceEntry 30 }
snMspsMgmdInterfacePktLenError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets received with
packet length error on an interface."
::= { snMspsMgmdInterfaceEntry 31 }
snMspsMgmdInterfacePktsWithLocalIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets received on an interface with
local IP address as source address."
::= { snMspsMgmdInterfaceEntry 32 }
snMspsMgmdInterfaceSubnetCheckFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets dropped due to subnet check failure."
::= { snMspsMgmdInterfaceEntry 33 }
snMspsMgmdInterfaceQryFromNonQuerier OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of queries received from a non-querier on an interface."
::= { snMspsMgmdInterfaceEntry 34 }
snMspsMgmdInterfaceReportVersionMisMatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of reports received by with version mismatch on an interface."
::= { snMspsMgmdInterfaceEntry 35 }
snMspsMgmdInterfaceQryVersionMisMatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of queries received with version mismatch on an interface."
::= { snMspsMgmdInterfaceEntry 36 }
snMspsMgmdInterfaceUnknownMsgType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets received with unknown message type on an interface."
::= { snMspsMgmdInterfaceEntry 37 }
snMspsMgmdInterfaceInvalidV1Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of invalid V2 reports received on an interface."
::= { snMspsMgmdInterfaceEntry 38 }
snMspsMgmdInterfaceInvalidV2Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of invalid V2 reports received on an interface."
::= { snMspsMgmdInterfaceEntry 39 }
snMspsMgmdInterfaceInvalidV3Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of invalid V3 reports received on an interface."
::= { snMspsMgmdInterfaceEntry 40 }
snMspsMgmdInterfaceRouterAlertCheckFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of packets dropped due to router alert check failure."
::= { snMspsMgmdInterfaceEntry 41 }
snMspsMgmdInterfaceIncomingSSMPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of V3 reports received on an interface for SSM group range."
::= { snMspsMgmdInterfaceEntry 42 }
snMspsMgmdInterfaceInvalidSSMPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of invalid SSM v3 reports received on an interface."
::= { snMspsMgmdInterfaceEntry 43 }
snMspsMgmdInterfaceJoinPktRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the rate at which the join packets can be received on an interface."
DEFVAL { 0 }
::= { snMspsMgmdInterfaceEntry 44 }
snMspsMgmdInterfaceMalformedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of Malformed packets received. Packet is just not as expected in the protocol specifications."
::= { snMspsMgmdInterfaceEntry 45 }
snMspsMgmdInterfaceSocketErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of socket errors."
::= { snMspsMgmdInterfaceEntry 46 }
snMspsMgmdInterfaceBadScopeErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of MLD packets received on the link scope IPv6 multicast address. "
::= { snMspsMgmdInterfaceEntry 47 }
-- ************************************************
-- MGMD CACHE TABLE
-- ************************************************
snMspsMgmdCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMgmdCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IGMP/MLD group statistic
information"
::= { snMspsMgmd 10 }
snMspsMgmdCacheEntry OBJECT-TYPE
SYNTAX SnMspsMgmdCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the necessary Statistics of Multicast
Groups"
INDEX { snMspsMgmdCacheAddrType, snMspsMgmdCacheAddress,
snMspsMgmdCacheIfIndex }
::= { snMspsMgmdCacheTable 1 }
SnMspsMgmdCacheEntry ::=
SEQUENCE {
snMspsMgmdCacheAddrType
InetAddressType,
snMspsMgmdCacheAddress
InetAddress,
snMspsMgmdCacheIfIndex
InterfaceIndex,
snMspsMgmdCacheGroupCompMode
Integer32,
snMspsMgmdCacheGroupType
INTEGER
}
snMspsMgmdCacheAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of this interface. It can be IPv4 or IPv6.
This entry along with
the ifIndex and CacheAddress acts as the index to the
snMspsMgmdCache table. A physical interface may be
configured in multiple modes concurrently, e.g., in IPv4
and IPv6 modes connected to the same interface; however,
the traffic is considered to be logically separate."
::= { snMspsMgmdCacheEntry 1 }
snMspsMgmdCacheAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry
contains information."
::= { snMspsMgmdCacheEntry 2 }
snMspsMgmdCacheIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface for which this entry contains information for
an IP multicast group address."
::= { snMspsMgmdCacheEntry 3 }
snMspsMgmdCacheGroupCompMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Group Compatibility Mode of the particular Group."
::= { snMspsMgmdCacheEntry 4 }
snMspsMgmdCacheGroupType OBJECT-TYPE
SYNTAX INTEGER { static(1),
dynamic(2),
both(3) -- static and dynamic
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Group configured type is static/dynamic/static and dynamic."
::= { snMspsMgmdCacheEntry 5 }
-- ************************************************
-- IGMP GROUPLIST TABLE
-- ************************************************
snMspsMgmdIgmpGroupListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsMgmdIgmpGroupListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IGMP grouplist information. Multiple range of groups will be grouped to a list and list can be mapped to an interface to exempt limit on that interface. Group list can be configured for IPv4 multicast addresses."
::= { snMspsMgmd 11 }
snMspsMgmdIgmpGroupListEntry OBJECT-TYPE
SYNTAX SnMspsMgmdIgmpGroupListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information related to IGMP grouplist "
INDEX { snMspsMgmdIgmpGrpListId,snMspsMgmdIgmpGrpIP,snMspsMgmdIgmpGrpPrefixLen }
::= { snMspsMgmdIgmpGroupListTable 1 }
SnMspsMgmdIgmpGroupListEntry ::=
SEQUENCE {
snMspsMgmdIgmpGrpListId
Unsigned32,
snMspsMgmdIgmpGrpIP
IpAddress,
snMspsMgmdIgmpGrpPrefixLen
IpAddress,
snMspsMgmdIgmpGrpListRowStatus
RowStatus
}
snMspsMgmdIgmpGrpListId OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the Id of Group List"
::= { snMspsMgmdIgmpGroupListEntry 1 }
snMspsMgmdIgmpGrpIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the Group IP address."
::= { snMspsMgmdIgmpGroupListEntry 2 }
snMspsMgmdIgmpGrpPrefixLen OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the Prefix Length."
::= { snMspsMgmdIgmpGroupListEntry 3 }
snMspsMgmdIgmpGrpListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus of GroupList record"
::= { snMspsMgmdIgmpGroupListEntry 4 }
snMspsVrrpSystem OBJECT IDENTIFIER ::= { snMspsVrrp 1 }
snMspsVrrpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the VRRP is enabled Globally."
::= { snMspsVrrpSystem 1 }
snMspsVrrpVridTrackStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable vrid tracking feature in VRRP Module.
For example if the objects sets enabled then
virtual master routers will track all other virtual routers configured on different interface.
If tracking virtual router goes to init state from master/backup because of interface down then
non-tracking virtual router will send priority 1 Advertisement packets to enable other router to become master.
When the tracking virtual router comes new state from init state again, the
VRRP Advertisement is sent again with original priority value."
DEFVAL { disabled }
::= { snMspsVrrpSystem 2 }
-- *******************************************************************
-- VRRP Operations Table extension starts
-- *******************************************************************
snMspsVrrpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVrrpOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operations table for a VRRP router which consists of a
sequence of 'snMspsVrrpOperEntry' items. This table is a
proprietary extension to the standard fsVrrpOperTable"
::= { snMspsVrrpSystem 3 }
snMspsVrrpOperEntry OBJECT-TYPE
SYNTAX SnMspsVrrpOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the snMspsVrrpOperTable contains the additional
operational characteristics of a virtual router apart
from fsVrrpOperTable."
AUGMENTS { vrrpOperEntry }
::= { snMspsVrrpOperTable 1 }
SnMspsVrrpOperEntry ::=
SEQUENCE {
snMspsVrrpAdminPriority
Integer32,
snMspsVrrpOperTrackGroupId
Unsigned32,
snMspsVrrpOperDecrementPriority
Unsigned32
}
snMspsVrrpAdminPriority OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is same as that of vrrpOperPriority specified
in VRRP-MIB. The only difference is, if the router owns the
associated IP address(es) then vrrpOperPriority will have
the value 255 and fsVrrpAdminPriority will have the value
configured by the administrator. Write operation requires
admin down for this instance and the change will be reflected
in the value of vrrpOperPriority also."
DEFVAL { 100 }
::= { snMspsVrrpOperEntry 1 }
snMspsVrrpOperTrackGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the group index of the tracking group table
snMspsVrrpOperTrackGroupTable.
When the interface which is tracked by snMspsVrrpOperTrackGroupTable goes
operationally down and if this virtual router entry is the master,
the virtual router sends VRRP Advertisement with its actual priority
value decremented by the value configured in
snMspsVrrpOperDecrementPriority to enable other router to become master.
When the interface which is tracked comes operationally up again, the
VRRP Advertisement is sent again with original priority value.
This object is NOT applicable for VRRP Master routers owning the
IPv4 address.
This object is allowed to set even if vrrpOperRowStatus is active
and vrrpOperAdminState is up."
DEFVAL { 0 }
::= { snMspsVrrpOperEntry 2 }
snMspsVrrpOperDecrementPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority value carried by the VRRP Master router
in VRRP Advertisements when whose interface being tracked by
snMspsVrrpOperTrackGroupTable goes operationally down.
This object is NOT applicable for VRRP Master routers owning the
IPv4 address.
This object is allowed to set even if vrrpOperRowStatus is active
and vrrpOperAdminState is up."
DEFVAL { 0 }
::= { snMspsVrrpOperEntry 3 }
-- *******************************************************************
-- VRRP Operations Table extension ends
-- *******************************************************************
-- *******************************************************************
-- VRRP Oper Track Group Table - Starts
-- *******************************************************************
snMspsVrrpOperTrackGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVrrpOperTrackGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Oper Track Group table for a VRRP router which consists of a
sequence of 'snMspsVrrpOperTrackGroupEntry' items.
This table contains the list of characteristics tracked by this
virtual router."
::= { snMspsVrrpSystem 4 }
snMspsVrrpOperTrackGroupEntry OBJECT-TYPE
SYNTAX SnMspsVrrpOperTrackGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the snMspsVrrpOperTrackGroupTable contains the
characteristics tracked by this virtual router. "
INDEX { snMspsVrrpOperTrackGroupIndex }
::= { snMspsVrrpOperTrackGroupTable 1 }
SnMspsVrrpOperTrackGroupEntry ::=
SEQUENCE {
snMspsVrrpOperTrackGroupIndex
Unsigned32,
snMspsVrrpOperTrackedGroupTrackedLinks
Unsigned32,
snMspsVrrpOperTrackRowStatus
RowStatus
}
snMspsVrrpOperTrackGroupIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of this track group table. "
::= { snMspsVrrpOperTrackGroupEntry 1 }
snMspsVrrpOperTrackedGroupTrackedLinks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of links to be tracked. The value configured
here indicates the number of links in snMspsVrrpOperTrackGroupIfTable
to go down to give notification to VRRP Operations table so that
master to backup transition is initiated. Default value is 0 meaning
only if all the links configured in snMspsVrrpOperTrackGroupIfTable goes
down, indication is given to VRRP Operations table to initiate
master to backup transition.
The value configured here should be less than or equal to
the number of entries in snMspsVrrpOperTrackGroupIfTable or zero at all
the time. If value is anything else, appropriate error is thrown.
"
DEFVAL { 0 }
::= { snMspsVrrpOperTrackGroupEntry 2 }
snMspsVrrpOperTrackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus variable should be used in accordance to installation
and removal conventions for conceptual rows.
To create a row in this table, a manager sets this object to either
createAndGo(4) or createAndWait(5). Until instances of all
corresponding columns are appropriately configured and atleast one
entry in snMspsVrrpOperTrackGroupIfTable is created, the value of the
corresponding instance of the 'snMspsVrrpOperTrackRowStatus'
column will be read as notReady(3).
In particular, a newly created row cannot be made active(1) until
(minimally) one or more entries are created in
snMspsVrrpOperTrackGroupIfTable is created, value of the object
snMspsVrrpOperTrackedGroupTrackedLinks is set to number of entries
created in snMspsVrrpOperTrackGroupIfTable or 0.
A typical order of operation to add a row is:
1. Create a row in snMspsVrrpOperTrackGroupTable with
createAndWait(5).
2. Create one or more entries in snMspsVrrpOperTrackGroupIfTable
3. Set snMspsVrrpOperTrackedGroupTrackedLinks as the number of entries
created in snMspsVrrpOperTrackGroupIfTable.
4. Set snMspsVrrpOperTrackRowStatus to active(1).
An Entry in this table can be deleted, only if there are no entries
in snMspsVrrpOperTrackGroupIfTable.
Before an entry is deleted in snMspsVrrpOperTrackGroupIfTable is
deleted, the value snMspsVrrpOperTrackedGroupTrackedLinks should be
adjusted. Otherwise, error will be thrown.
Value 'snMspsVrrpOperTrackGroupIndex' is used as a reference in
snMspsVrrpOperTable.
Acceptable configurable values for this object are createAndGo(4),
createAndWait(5), active(1) and destroy(6). "
::= { snMspsVrrpOperTrackGroupEntry 3 }
-- *******************************************************************
-- VRRP Oper Track Group Table extension - Ends
-- *******************************************************************
-- *******************************************************************
-- VRRP Oper Track Group If Table - Starts
-- *******************************************************************
snMspsVrrpOperTrackGroupIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVrrpOperTrackGroupIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Oper Track Group If table for a VRRP router which consists of a
sequence of 'snMspsVrrpOperTrackGroupIfEntry' items.
This table contains the interfaces to be tracked by this
virtual router."
::= { snMspsVrrpSystem 5 }
snMspsVrrpOperTrackGroupIfEntry OBJECT-TYPE
SYNTAX SnMspsVrrpOperTrackGroupIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the snMspsVrrpOperTrackGroupIfTable contains the
interfaces tracked by this virtual router. "
INDEX { snMspsVrrpOperTrackGroupIndex, snMspsVrrpOperTrackGroupIfIndex }
::= { snMspsVrrpOperTrackGroupIfTable 1 }
SnMspsVrrpOperTrackGroupIfEntry ::=
SEQUENCE {
snMspsVrrpOperTrackGroupIfIndex
InterfaceIndexOrZero,
snMspsVrrpOperTrackGroupIfRowStatus
RowStatus
}
snMspsVrrpOperTrackGroupIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ifIndex of the interface being tracked for link
operational status. "
::= { snMspsVrrpOperTrackGroupIfEntry 1 }
snMspsVrrpOperTrackGroupIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus variable should be used in accordance to installation
and removal conventions for conceptual rows.
To create a row in this table, a manager sets this object to either
createAndGo(4) and entry automatically transitions to active(1).
Before an entry is deleted in snMspsVrrpOperTrackGroupIfTable is
deleted, the value snMspsVrrpOperTrackedGroupTrackedLinks should be
adjusted. Otherwise, error will be thrown.
Value of snMspsVrrpOperTrackedGroupTrackedLinks should always be less than
or equal to the number of entries created here or zero.
If value is anything else, appropriate error is thrown.
Acceptable configurable values for this object are createAndGo(4)
and destroy(6). "
::= { snMspsVrrpOperTrackGroupIfEntry 2 }
-- *******************************************************************
-- VRRP Oper Track Group If Table extension - Ends
-- *******************************************************************
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapVRRPStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Device changed vrrp master state."
::= { snMspsTrapPrefix 2201 }
-- -------------------------------------------------------------
-- END OF SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsVrrpv3System OBJECT IDENTIFIER ::= { snMspsVrrpv3 1 }
snMspsVrrpv3Status OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the VRRP is enabled Globally."
::= { snMspsVrrpv3System 1 }
snMspsVrrpv3MaxOperEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gives the Maximum Number of Oper Table Entries."
::= { snMspsVrrpv3System 2 }
snMspsVrrpv3VridTrackStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable vrid tracking feature in VRRPv3 Module.
For example if the objects sets enabled then
virtual master routers will track all other virtual routers configured on different interface.
If tracking virtual router goes to init state from master/backup because of interface down then
non-tracking virtual router will send priority 1 Advertisement packets to enable other router to become master.
When the tracking virtual router comes new state from init state again, the
VRRP Advertisement is sent again with original priority value."
DEFVAL { disabled }
::= { snMspsVrrpv3System 3 }
-- *******************************************************************
-- VRRPV3 Operations Table extension
-- *******************************************************************
snMspsVrrpv3OperationsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVrrpv3OperationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operations table for a VRRP router which consists of a
sequence of 'fsVrrpOperEntry' items. This table is a
proprietary extension to the standard vrrpOperTable"
::= { snMspsVrrpv3System 4 }
snMspsVrrpv3OperationsEntry OBJECT-TYPE
SYNTAX SnMspsVrrpv3OperationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the fsVrrpOperTable contains the additional
operational characteristics of a virtual router apart
from vrrpOperTable."
INDEX { ifIndex, vrrpv3OperationsVrId,
vrrpv3OperationsInetAddrType
}
::= { snMspsVrrpv3OperationsTable 1 }
SnMspsVrrpv3OperationsEntry ::=
SEQUENCE {
snMspsVrrpv3AdminPriority Integer32,
snMspsVrrpv3SendAndRcvCompatibleVersion TruthValue,
snMspsVrrpv3OperationsTrackGroupId Unsigned32,
snMspsVrrpv3OperationsDecrementPriority Unsigned32
}
snMspsVrrpv3AdminPriority OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is same as that of vrrpv3OperationsPriority specified
in VRRPV3-MIB. The only difference is, if the router owns the
associated IP address(es) then vrrpv3OperationsPriority will have
the value 255 and snMspsVrrpv3AdminPriority will have the value
configured by the administrator. Write operation requires
vrrpv3OperationsRowStatus as notInService(2) should be used to
administratively bring the row down for this instance and the
change will be reflected in the value of vrrpv3OperationsPriority
also."
DEFVAL { 100 }
::= { snMspsVrrpv3OperationsEntry 1 }
snMspsVrrpv3SendAndRcvCompatibleVersion OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this object is true(1) then virtual router will send and receive
version2 and version3 packets. If false(2) then virtual router
will send and receive version3 packets only. Default is false(2).
This object is not relevant for rows representing VRRP
over IPv6 and should be set to false(2)."
DEFVAL { false }
::= { snMspsVrrpv3OperationsEntry 2 }
snMspsVrrpv3OperationsTrackGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the group index of the tracking group table
snMspsVrrpv3OperationsTrackGroupTable.
When the interface which is tracked by
snMspsVrrpv3OperationsTrackGroupTable goes operationally down and if this
virtual router entry is the master, the virtual router sends VRRP
Advertisement with its actual priority value decremented by the value
configured in snMspsVrrpv3OperationsDecrementPriority to enable other
router to become master.
When the interface which is tracked comes operationally up again, the
VRRP Advertisement is sent again with original priority value.
This object is NOT applicable for VRRP Master routers owning the
IPvX address.
This object is allowed to set even if vrrpv3OperationsRowStatus is
active. "
DEFVAL { 0 }
::= { snMspsVrrpv3OperationsEntry 3 }
snMspsVrrpv3OperationsDecrementPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the priority value carried by the VRRP Master router
in VRRP Advertisements when whose interface being tracked by
snMspsVrrpv3OperationsTrackGroupTable goes operationally down.
This object is NOT applicable for VRRP Master routers owning the
IPvX address.
This object is allowed to set even if vrrpv3OperationsRowStatus is
active. "
DEFVAL { 0 }
::= { snMspsVrrpv3OperationsEntry 4 }
-- *******************************************************************
-- VRRP V3 Operations Track Group Table - Starts
-- *******************************************************************
snMspsVrrpv3OperationsTrackGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVrrpv3OperationsTrackGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Operations Track Group table for a VRRP router which consists of a
sequence of 'snMspsVrrpv3OperationsTrackGroupEntry' items.
This table contains the list of characteristics tracked by this
virtual router."
::= { snMspsVrrpv3System 5 }
snMspsVrrpv3OperationsTrackGroupEntry OBJECT-TYPE
SYNTAX SnMspsVrrpv3OperationsTrackGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the snMspsVrrpv3OperationsTrackGroupTable contains the
characteristics tracked by this virtual router. "
INDEX { snMspsVrrpv3OperationsTrackGroupIndex }
::= { snMspsVrrpv3OperationsTrackGroupTable 1 }
SnMspsVrrpv3OperationsTrackGroupEntry ::=
SEQUENCE {
snMspsVrrpv3OperationsTrackGroupIndex
Unsigned32,
snMspsVrrpv3OperationsTrackedGroupTrackedLinks
Unsigned32,
snMspsVrrpv3OperationsTrackRowStatus
RowStatus
}
snMspsVrrpv3OperationsTrackGroupIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of this track group table. "
::= { snMspsVrrpv3OperationsTrackGroupEntry 1 }
snMspsVrrpv3OperationsTrackedGroupTrackedLinks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the number of links to be tracked. The value configured
here indicates the number of links in
snMspsVrrpv3OperationsTrackGroupIfTable to go down to give notification
to VRRP Operations table so that master to backup transition is
initiated. Default value is 0 meaning only if all the links
configured in snMspsVrrpv3OperationsTrackGroupIfTable goes
down, indication is given to VRRP Operations table to initiate
master to backup transition.
The value configured here should be less than or equal to
the number of entries in snMspsVrrpv3OperationsTrackGroupIfTable or zero
at all the time. If value is anything else, appropriate error is
thrown.
"
::= { snMspsVrrpv3OperationsTrackGroupEntry 2 }
snMspsVrrpv3OperationsTrackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus variable should be used in accordance to installation
and removal conventions for conceptual rows.
To create a row in this table, a manager sets this object to either
createAndGo(4) or createAndWait(5). Until instances of all
corresponding columns are appropriately configured and atleast one
entry in snMspsVrrpv3OperationsTrackGroupIfTable is created, the value
of the corresponding instance of the
'snMspsVrrpv3OperationsTrackRowStatus' column will be read as notReady(3).
In particular, a newly created row cannot be made active(1) until
(minimally) one or more entries are created in
snMspsVrrpv3OperationsTrackGroupIfTable is created, value of the object
snMspsVrrpv3OperationsTrackedGroupTrackedLinks is set to number of entries
created in snMspsVrrpv3OperationsTrackGroupIfTable or 0.
A typical order of operation to add a row is:
1. Create a row in snMspsVrrpv3OperationsTrackGroupTable with
createAndWait(5).
2. Create one or more entries in snMspsVrrpv3OperationsTrackGroupIfTable
3. Set snMspsVrrpv3OperationsTrackedGroupTrackedLinks as the number of
entries created in snMspsVrrpv3OperationsTrackGroupIfTable.
4. Set snMspsVrrpv3OperationsTrackRowStatus to active(1).
An Entry in this table can be deleted, only if there are no entries
in snMspsVrrpv3OperationsTrackGroupIfTable.
Before an entry is deleted in snMspsVrrpv3OperationsTrackGroupIfTable is
deleted, the value snMspsVrrpv3OperationsTrackedGroupTrackedLinks should
be adjusted. Otherwise, error will be thrown.
Value 'snMspsVrrpv3OperationsTrackGroupIndex' is used as a reference in
snMspsVrrpv3OperationsTable.
Acceptable configurable values for this object are createAndGo(4),
createAndWait(5), active(1) and destroy(6). "
::= { snMspsVrrpv3OperationsTrackGroupEntry 3 }
-- *******************************************************************
-- VRRPv3 Operations Track Group Table extension - Ends
-- *******************************************************************
-- *******************************************************************
-- VRRPv3 Operations Track Group If Table - Starts
-- *******************************************************************
snMspsVrrpv3OperationsTrackGroupIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsVrrpv3OperationsTrackGroupIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Oper Track Group If table for a VRRP router which consists of a
sequence of 'snMspsVrrpv3OperationsTrackGroupIfEntry' items.
This table contains the interfaces to be tracked by this
virtual router."
::= { snMspsVrrpv3System 6 }
snMspsVrrpv3OperationsTrackGroupIfEntry OBJECT-TYPE
SYNTAX SnMspsVrrpv3OperationsTrackGroupIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the snMspsVrrpv3OperationsTrackGroupIfTable contains the
interfaces tracked by this virtual router. "
INDEX { snMspsVrrpv3OperationsTrackGroupIndex,
snMspsVrrpv3OperationsTrackGroupIfIndex
}
::= { snMspsVrrpv3OperationsTrackGroupIfTable 1 }
SnMspsVrrpv3OperationsTrackGroupIfEntry ::=
SEQUENCE {
snMspsVrrpv3OperationsTrackGroupIfIndex
InterfaceIndexOrZero,
snMspsVrrpv3OperationsTrackGroupIfRowStatus
RowStatus
}
snMspsVrrpv3OperationsTrackGroupIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ifIndex of the interface being tracked for link
operational status. "
::= { snMspsVrrpv3OperationsTrackGroupIfEntry 1 }
snMspsVrrpv3OperationsTrackGroupIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus variable should be used in accordance to installation
and removal conventions for conceptual rows.
To create a row in this table, a manager sets this object to either
createAndGo(4) and entry automatically transitions to active(1).
Before an entry is deleted in snMspsVrrpv3OperationsTrackGroupIfTable is
deleted, the value snMspsVrrpv3OperationsTrackedGroupTrackedLinks should
be adjusted. Otherwise, error will be thrown.
Value of snMspsVrrpv3OperationsTrackedGroupTrackedLinks should always be
less than or equal to the number of entries created here or zero.
If value is anything else, appropriate error is thrown.
Acceptable configurable values for this object are createAndGo(4)
and destroy(6). "
::= { snMspsVrrpv3OperationsTrackGroupIfEntry 2 }
-- *******************************************************************
-- VRRPv3 Operations Track Group If Table extension - Ends
-- *******************************************************************
snMspsVrrpv3TraceOption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable trace statements in
VRRPv3 Module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping between the bit positions & the trace level is
as follows:
0x00000000 - No Traces
0x0000ffff - All Traces
0x00000001 - Packet Traces
0x00000002 - Event Traces
0x00000004 - Init Traces
0x00000008 - Timers Traces
0x00000010 - All Failures Traces
For example if the 0x00000001 and 0x00000002 are set, then the trace
statement related to Packet and Event related
messages will be printed."
DEFVAL { 0 }
::= { snMspsVrrpv3System 7 }
-- ----------------------------------------------------------------
-- snmspsrmap.mib
-- SIMATIC NET Industrial Ethernet Scalance
-- MSPS Private MIB
-- Copyright (c) 2010, 2013 Siemens AG
-- ----------------------------------------------------------------
--
-- MIB Module : SN-MSPS-ROUTE_MAP-MIB
--
-- Revision : V0.0.0.1
-- Date : 2013/07/03
--
-- ----------------------------------------------------------------
------------------------------------------------------------------------------
-- Groups in MIB
------------------------------------------------------------------------------
snMspsRMapGroup OBJECT IDENTIFIER ::= { snMspsRouteMap 1 }
snMspsRMapTrapCfgGroup OBJECT IDENTIFIER ::= { snMspsRouteMap 2 }
snMspsRMapTrapGroup OBJECT IDENTIFIER ::= { snMspsRouteMap 3 }
snMspsRMapTrapNotifications OBJECT IDENTIFIER ::= { snMspsRMapTrapGroup 0 }
--Route map table
snMspsRMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Route map table contains route map name, sequence
number and access status (Permit/Deny).Route-maps
can be used in policy based routing and route
redistribution"
::= { snMspsRMapGroup 1 }
snMspsRMapEntry OBJECT-TYPE
SYNTAX SnMspsRMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Row instance of the route map table"
INDEX { snMspsRMapName,
snMspsRMapSeqNum
}
::= { snMspsRMapTable 1 }
SnMspsRMapEntry ::= SEQUENCE {
snMspsRMapName DisplayString,
snMspsRMapSeqNum Unsigned32,
snMspsRMapAccess INTEGER,
snMspsRMapRowStatus RowStatus
}
snMspsRMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps."
::= { snMspsRMapEntry 1 }
snMspsRMapSeqNum OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Number that indicates the position of a new route
map in the list of route maps already configured
with the same name"
::= { snMspsRMapEntry 2 }
snMspsRMapAccess OBJECT-TYPE
SYNTAX INTEGER {
permit (1),
deny (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Access type associated with sequence number in a
route-map. Once an instance of this object is
created, its value can not be changed"
DEFVAL {permit}
::= { snMspsRMapEntry 3 }
snMspsRMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRMapEntry 4}
-- destination match table
snMspsRMapDestMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRMapDestMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Route-map destination Match table contains various objects
used for matching the parameters of the route "
::= { snMspsRMapGroup 2 }
snMspsRMapDestMatchEntry OBJECT-TYPE
SYNTAX SnMspsRMapDestMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Row instance of the route map match table"
INDEX { snMspsRMapName,
snMspsRMapSeqNum,
snMspsRMapMatchDestInetType,
snMspsRMapMatchDestInetAddress,
snMspsRMapMatchDestInetPrefix
}
::= { snMspsRMapDestMatchTable 1 }
SnMspsRMapDestMatchEntry ::= SEQUENCE {
snMspsRMapMatchDestInetType InetAddressType,
snMspsRMapMatchDestInetAddress InetAddress,
snMspsRMapMatchDestInetPrefix InetAddressPrefixLength,
snMspsRMapMatchDestRowStatus RowStatus
}
snMspsRMapMatchDestInetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of destination network Inet address
IPv4(1)
IPv6(2)"
::= { snMspsRMapDestMatchEntry 1 }
snMspsRMapMatchDestInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Inet address of destination network"
::= { snMspsRMapDestMatchEntry 2 }
snMspsRMapMatchDestInetPrefix OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The prefix length of Inet address
of destination network"
::= { snMspsRMapDestMatchEntry 3 }
snMspsRMapMatchDestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRMapDestMatchEntry 4 }
-- source match table
snMspsRMapSourceMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRMapSourceMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Route-map source Match table contains various objects
used for matching the parameters of the route "
::= { snMspsRMapGroup 3 }
snMspsRMapSourceMatchEntry OBJECT-TYPE
SYNTAX SnMspsRMapSourceMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Row instance of the route map match table"
INDEX { snMspsRMapName,
snMspsRMapSeqNum,
snMspsRMapMatchSourceInetType,
snMspsRMapMatchSourceInetAddress,
snMspsRMapMatchSourceInetPrefix
}
::= { snMspsRMapSourceMatchTable 1 }
SnMspsRMapSourceMatchEntry ::= SEQUENCE {
snMspsRMapMatchSourceInetType InetAddressType,
snMspsRMapMatchSourceInetAddress InetAddress,
snMspsRMapMatchSourceInetPrefix InetAddressPrefixLength,
snMspsRMapMatchSourceRowStatus RowStatus
}
snMspsRMapMatchSourceInetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Matches the type of source network Inet address
IPv4(1)
IPv6(2)"
::= { snMspsRMapSourceMatchEntry 1 }
snMspsRMapMatchSourceInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Matches Inet address of source network"
::= { snMspsRMapSourceMatchEntry 2 }
snMspsRMapMatchSourceInetPrefix OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Matches the prefix length of Inet address
of source network"
::= { snMspsRMapSourceMatchEntry 3 }
snMspsRMapMatchSourceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRMapSourceMatchEntry 4 }
-- NextHop match table
snMspsRMapNextHopMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRMapNextHopMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Route-map NextHop Match table contains various objects
used for matching the parameters of the route "
::= { snMspsRMapGroup 4 }
snMspsRMapNextHopMatchEntry OBJECT-TYPE
SYNTAX SnMspsRMapNextHopMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Row instance of the route map match table"
INDEX { snMspsRMapName,
snMspsRMapSeqNum,
snMspsRMapMatchNextHopInetType,
snMspsRMapMatchNextHopInetAddr
}
::= { snMspsRMapNextHopMatchTable 1 }
SnMspsRMapNextHopMatchEntry ::= SEQUENCE {
snMspsRMapMatchNextHopInetType InetAddressType,
snMspsRMapMatchNextHopInetAddr InetAddress,
snMspsRMapMatchNextHopRowStatus RowStatus
}
snMspsRMapMatchNextHopInetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Matches the Inet address type of next hop router
IPv4(1)
IPv6(2)"
::= { snMspsRMapNextHopMatchEntry 1 }
snMspsRMapMatchNextHopInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Matches the Inet address of next hop router"
::= { snMspsRMapNextHopMatchEntry 2 }
snMspsRMapMatchNextHopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRMapNextHopMatchEntry 3 }
-- match table
snMspsRMapMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRMapMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Route-map Match table contains various objects
used for matching the parameters of the route "
::= { snMspsRMapGroup 5 }
snMspsRMapMatchEntry OBJECT-TYPE
SYNTAX SnMspsRMapMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Row instance of the route map match table"
INDEX { snMspsRMapName,
snMspsRMapSeqNum,
snMspsRMapMatchType,
snMspsRMapMatchValue
}
::= { snMspsRMapMatchTable 1 }
SnMspsRMapMatchEntry ::= SEQUENCE {
snMspsRMapMatchType Unsigned32,
snMspsRMapMatchValue Unsigned32,
snMspsRMapMatchRowStatus RowStatus
}
snMspsRMapMatchType OBJECT-TYPE
SYNTAX Unsigned32 (1..12)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Match Type Identifies the specified route-map matche entry.
see match types in the below.
RMAP_MATCH_CMD_INTERFACE=4,
RMAP_MATCH_CMD_METRIC=5,
RMAP_MATCH_CMD_TAG=6,
RMAP_MATCH_CMD_METRIC_TYPE=7,
RMAP_MATCH_CMD_ROUTE_TYPE=8,
RMAP_MATCH_CMD_ASPATH_TAG=9,
RMAP_MATCH_CMD_COMMUNITY=10,
RMAP_MATCH_CMD_LOCAL_PREF=11,
RMAP_MATCH_CMD_ORIGIN=12 "
::= { snMspsRMapMatchEntry 1 }
snMspsRMapMatchValue OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Vale should be related to match type.
If user want to configure RMAP_MATCH_CMD_INTERFACE match type
then user should give relative interface index.
If user want to configure RMAP_MATCH_CMD_METRIC match type
then user should give metric value."
::= { snMspsRMapMatchEntry 2 }
snMspsRMapMatchRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRMapMatchEntry 3 }
-- set table
snMspsRMapSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsRMapSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Route-map set table contains various parameters that
are set during the process of policy routing or
route redistribution "
::= { snMspsRMapGroup 6 }
snMspsRMapSetEntry OBJECT-TYPE
SYNTAX SnMspsRMapSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Row instance of the route map set table"
INDEX { snMspsRMapName,
snMspsRMapSeqNum
}
::= { snMspsRMapSetTable 1 }
SnMspsRMapSetEntry ::= SEQUENCE {
snMspsRMapSetNextHopInetType InetAddressType,
snMspsRMapSetNextHopInetAddr InetAddress,
snMspsRMapSetInterface InterfaceIndex,
snMspsRMapSetMetric Integer32,
snMspsRMapSetTag Unsigned32,
snMspsRMapSetRouteType INTEGER,
snMspsRMapSetASPathTag Unsigned32,
snMspsRMapSetCommunity Unsigned32,
snMspsRMapSetLocalPref Integer32,
snMspsRMapSetOrigin INTEGER,
snMspsRMapSetWeight Unsigned32,
snMspsRMapSetEnableAutoTag INTEGER,
snMspsRMapSetLevel INTEGER,
snMspsRMapSetRowStatus RowStatus
}
snMspsRMapSetNextHopInetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Inet address type of next hop
IPv4(1)
IPv6(2)"
::= { snMspsRMapSetEntry 1 }
snMspsRMapSetNextHopInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION " This represents the nexthop Inet address and is set for a route
which passes the match condition."
::= { snMspsRMapSetEntry 2 }
snMspsRMapSetInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This value identifies the local interface through
which the next hop can be reached and is set for a route
which passes the match conditions."
::= { snMspsRMapSetEntry 3 }
snMspsRMapSetMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The primary routing metric.The semantics of this metric
are determined by the routing-protocol specified."
::= { snMspsRMapSetEntry 4}
snMspsRMapSetTag OBJECT-TYPE
SYNTAX Unsigned32(1..214748367)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the tag value of the routing protocol."
::= { snMspsRMapSetEntry 5 }
snMspsRMapSetRouteType OBJECT-TYPE
SYNTAX INTEGER {
local (3),
remote (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the route type as per RFC 2096"
::= { snMspsRMapSetEntry 6 }
snMspsRMapSetASPathTag OBJECT-TYPE
SYNTAX Unsigned32(1..214748367)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Converts the tag of a route into an autonomous system path.
Applies only when redistributing routes into BGP. "
::= { snMspsRMapSetEntry 7}
snMspsRMapSetCommunity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets BGP community attribute.The communities that BGP supports range
from well known ones like internet,no-advst,no-export to add
communities to already existing ones with the BGP. "
::= { snMspsRMapSetEntry 8 }
snMspsRMapSetLocalPref OBJECT-TYPE
SYNTAX Integer32 (1..214748367)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets reference value for the autonomous system path.
The preference is sent only to all routers in the
local autonomous system."
::= { snMspsRMapSetEntry 9 }
snMspsRMapSetOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp (1),
egp (2),
incomplete (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the BGP origin code.They can be from Remote Interior Gateway
Protocol (IGP) system or from Local Exterior Gateway Protocol (EGP)
system or from Remote autonomous system number which ranges from
0 to 65535 or from incomplete which mean Unknown heritage."
::= { snMspsRMapSetEntry 10 }
snMspsRMapSetWeight OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the BGP weight for the routing table"
::= { snMspsRMapSetEntry 11 }
snMspsRMapSetEnableAutoTag OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable automatic computing of tag table
when redistributing routes from BGP into IGP"
DEFVAL { disable }
::= { snMspsRMapSetEntry 12 }
snMspsRMapSetLevel OBJECT-TYPE
SYNTAX INTEGER {
level1 (1),
level2 (2),
level12 (3),
stubarea (4),
backbone (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set level for routes that are advertised into
the specified area of the routing domain"
::= { snMspsRMapSetEntry 13 }
snMspsRMapSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { snMspsRMapSetEntry 14 }
--route map snmp trap Configuration
snMspsRmapTrapCfgEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable sendig route map traps
when matching of route with route map occured"
DEFVAL { enable }
::= { snMspsRMapTrapCfgGroup 1 }
--route map snmp traps definition
snMspsRMapTrapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps."
::= { snMspsRMapTrapGroup 1 }
snMspsRMapTrapSeqNum OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Number that indicates the position of a new route
map in the list of route maps already configured
with the same name"
::= { snMspsRMapTrapGroup 2 }
--route map snmp traps notifications
snMspsRMapTrapMatch NOTIFICATION-TYPE
OBJECTS {
snMspsRMapTrapName,
snMspsRMapTrapSeqNum
}
STATUS deprecated
DESCRIPTION "Signifies that there has been a route matching
with route map"
::= { snMspsRMapTrapNotifications 1 }
-- PSE Objects
snMspsPoePsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPoePsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A private extension of standard pethPsePortTable."
::= { snMspsPoe 1 }
snMspsPoePsePortEntry OBJECT-TYPE
SYNTAX SnMspsPoePsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display the power
characteristics of a power Ethernet PSE port."
AUGMENTS { pethPsePortEntry }
::= { snMspsPoePsePortTable 1 }
SnMspsPoePsePortEntry ::= SEQUENCE {
snMspsPoePsePortPower
Gauge32,
snMspsPoePsePortVoltage
Gauge32,
snMspsPoePsePortCurrent
Gauge32,
snMspsPoePsePortMaximumPower
INTEGER,
snMspsPoePsePortMaximumPowerUsed
TruthValue
}
snMspsPoePsePortPower OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured power usage of ports expressed in Milliwatts."
::= { snMspsPoePsePortEntry 15 }
snMspsPoePsePortVoltage OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured voltage usage of ports expressed in Volts."
::= { snMspsPoePsePortEntry 16 }
snMspsPoePsePortCurrent OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Milliamps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured current usage of ports expressed in Milliamps."
::= { snMspsPoePsePortEntry 17 }
snMspsPoePsePortMaximumPower OBJECT-TYPE
SYNTAX INTEGER (0..30)
UNITS "W"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum power that can be assigned to devices connected to this port in Watts"
DEFVAL { 0 }
::= { snMspsPoePsePortEntry 18 }
snMspsPoePsePortMaximumPowerUsed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines if snMspsPoePsePortMaximumPower is used to limit the power delivered to the device connected to this port"
DEFVAL { false }
::= { snMspsPoePsePortEntry 19 }
-- Main PSE Objects
snMspsPoeMainPseTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsPoeMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A private extension of standard pethMainPseTable."
::= { snMspsPoe 3 }
snMspsPoeMainPseEntry OBJECT-TYPE
SYNTAX SnMspsPoeMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display the power characteristics of a PSE. "
AUGMENTS { pethMainPseEntry }
::= { snMspsPoeMainPseTable 1 }
SnMspsPoeMainPseEntry ::= SEQUENCE {
snMspsPoeMainPseAllocatedPower Gauge32,
snMspsPoeMainPseMaximumPower INTEGER,
snMspsPoeMainPseDescription DisplayString
}
snMspsPoeMainPseAllocatedPower OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"There is a certain power that needs to be allocated (reserved)
for each PSE basing on pethPsePortPowerClassifications
(like for Class 0,3 needs 15,4 Watts) of PD(Powered Devices)
connected to it"
::= { snMspsPoeMainPseEntry 6 }
snMspsPoeMainPseMaximumPower OBJECT-TYPE
SYNTAX INTEGER (1..65535)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum power that can be assigned to devices connected to a PSE"
::= { snMspsPoeMainPseEntry 8 }
snMspsPoeMainPseDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of a PSE"
::= { snMspsPoeMainPseEntry 10 }
-- -------------------------------------------------------------
-- SNMPv2 Notifications
-- -------------------------------------------------------------
snMspsTrapPoeStateChange NOTIFICATION-TYPE
STATUS current
DESCRIPTION "Poe state change notification."
::= { snMspsTrapPrefix 3051 }
snMspsNfcStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable NFC feature / chip."
::= { snMspsNfc 1 }
snMspsCableTesterVCT OBJECT IDENTIFIER ::= { snMspsCableTester 1 }
snMspsCableTesterVCTTDR OBJECT IDENTIFIER ::= { snMspsCableTesterVCT 1 }
-- --------------------------------------------------------------
-- VCTControlTable Sub-Group
-- --------------------------------------------------------------
snMspsCableTesterVCTTDRControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsCableTesterVCTTDRControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port objects for virtual cable test feature
uses Time Domain Reflectometry to determine the quality of cables,
connectors, and terminations. Test can not be performed on fiber
based interfaces. Test causes a link down!"
::= { snMspsCableTesterVCTTDR 10 }
snMspsCableTesterVCTTDRControlEntry OBJECT-TYPE
SYNTAX SnMspsCableTesterVCTTDRControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects for a particular
interface."
INDEX { snMspsCableTesterVCTTDRControlPortIndex }
::= { snMspsCableTesterVCTTDRControlTable 1 }
SnMspsCableTesterVCTTDRControlEntry ::= SEQUENCE {
snMspsCableTesterVCTTDRControlPortIndex INTEGER,
snMspsCableTesterVCTTDRControlTrigger INTEGER
}
snMspsCableTesterVCTTDRControlPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique number for each interface. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsCableTesterVCTTDRControlEntry 1 }
snMspsCableTesterVCTTDRControlTrigger OBJECT-TYPE
SYNTAX INTEGER {
no-operation(1),
test-port(2),
port-under-test(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Objekt to trigger the virtual cable test:
no-operation(1) no operation,
test-port(2) start a virtual cable test on the selected port,
port-under-test(3) a virtual cable test is currently running."
::= { snMspsCableTesterVCTTDRControlEntry 2 }
-- --------------------------------------------------------------
-- VCTResultTable Sub-Group
-- --------------------------------------------------------------
snMspsCableTesterVCTTDRResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsCableTesterVCTTDRResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing per-port and per-pair result objects for virtual cable test feature
uses Time Domain Reflectometry to determine the quality of cables,
connectors, and terminations.Test can not be performed on fiber based interfaces.
Test causes a link down!"
::= { snMspsCableTesterVCTTDR 11 }
snMspsCableTesterVCTTDRResultEntry OBJECT-TYPE
SYNTAX SnMspsCableTesterVCTTDRResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface entry containing objects for a particular
interface."
INDEX { snMspsCableTesterVCTTDRResultPortIndex,
snMspsCableTesterVCTTDRResultCablePairIndex }
::= { snMspsCableTesterVCTTDRResultTable 1 }
SnMspsCableTesterVCTTDRResultEntry ::= SEQUENCE {
snMspsCableTesterVCTTDRResultPortIndex INTEGER,
snMspsCableTesterVCTTDRResultCablePairIndex INTEGER,
snMspsCableTesterVCTTDRResultStatus INTEGER,
snMspsCableTesterVCTTDRResultLength INTEGER,
snMspsCableTesterVCTTDRResultDistance INTEGER
}
snMspsCableTesterVCTTDRResultPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique number for each interface. The number for each interface must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
::= { snMspsCableTesterVCTTDRResultEntry 1 }
snMspsCableTesterVCTTDRResultCablePairIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique number for each cable pair on the interface."
::= { snMspsCableTesterVCTTDRResultEntry 2 }
snMspsCableTesterVCTTDRResultStatus OBJECT-TYPE
SYNTAX INTEGER {
cableNotTested(1),
cableTestFail(2),
cableTestNormal(3),
cableTestImpedanceMismatch(4),
cableTestOpen(5),
cableTestShort(6),
cableTestShortWithPair0(7),
cableTestShortWithPair1(8),
cableTestShortWithPair2(9),
cableTestShortWithPair3(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status of the virtual cable test:
cableNotTested(1) test not performed,
cableTestFail(2) test not performed successfully,
cableTestNormal(3) test performed - passed,
cableTestImpedanceMismatch(4) test performed - impedance mismatch,
cableTestOpen(5) test performed - open in cable,
cableTestShort(6) test performed - short in cable,
cableTestShortWithPair0(7) test performed - short in TX cable with RX pair 0,
cableTestShortWithPair1(8) test performed - short in TX cable with RX pair 1,
cableTestShortWithPair2(9) test performed - short in TX cable with RX pair 2,
cableTestShortWithPair3(10) test performed - short in TX cable with RX pair 3"
::= { snMspsCableTesterVCTTDRResultEntry 3 }
snMspsCableTesterVCTTDRResultLength OBJECT-TYPE
SYNTAX INTEGER {
lengthLessThan50m(1),
length50m-80m(2),
length80m-110m(3),
length110m-140m(4),
lengthMoreThan140m(5),
lengthUnknown(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current measured cable length of the virtual cable test, which performed passed:
lengthLessThan50m(1) tested length less than 50m,
length50m-80m(2) tested length between 50m and 80m,
length80m-110m(3) tested length between 80m and 110m,
length110m-140m(4) tested length between 110m and 140m,
lengthMoreThan140m(5) tested length more than 140m,
lengthUnknown(6) length unknown or not tested."
::= { snMspsCableTesterVCTTDRResultEntry 4 }
snMspsCableTesterVCTTDRResultDistance OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current measured cable length of the virtual cable test, which performed
with a cableTestImpedanceMismatch, cableTestOpen or cableTestShort.
The distance is shown in meter."
::= { snMspsCableTesterVCTTDRResultEntry 5 }
-- ----------------------
-- snMspsDiagnostics.mib
--
-- SIEMENS AG
-- Industry Automation Division
--
-- object definitions for environmental data
--
-- Copyright (c) 2013 Siemens AG
-- All rights reserved.
-- ----------------------------------------------------------------------
--
-- MIB Module : SN-MSPS-DIAGNOSTICS-MIB
--
-- Revision : V0.0.0.2
-- Date : 2018/02/26
--
-- ----------------------------------------------------------------------
snMspsDiagnosticsUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDiagnosticsUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Environmental data of the device and connected parts"
::= {snMspsDiagnostics 3}
snMspsDiagnosticsUsageEntry OBJECT-TYPE
SYNTAX SnMspsDiagnosticsUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A set of objects that contain usage data of one part of the device"
INDEX { snMspsDiagnosticsUsageIndex }
::= { snMspsDiagnosticsUsageTable 1}
SnMspsDiagnosticsUsageEntry::= SEQUENCE {
snMspsDiagnosticsUsageIndex Integer32,
snMspsDiagnosticsUsagePresent TruthValue,
snMspsDiagnosticsUsageName SnmpAdminString,
snMspsDiagnosticsUsageStatus INTEGER,
snMspsDiagnosticsUsageValue Integer32,
snMspsDiagnosticsUsageHighWarning Integer32,
snMspsDiagnosticsUsageHighCritical Integer32
}
snMspsDiagnosticsUsageIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index variable"
::= { snMspsDiagnosticsUsageEntry 1 }
snMspsDiagnosticsUsagePresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows if the part is present"
::= { snMspsDiagnosticsUsageEntry 4 }
snMspsDiagnosticsUsageName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Original part description"
::= { snMspsDiagnosticsUsageEntry 7 }
snMspsDiagnosticsUsageStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
warning(2),
critical(3),
invalid(4),
initial(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the usage values read from the part
ok(1): No threshold is violated
warning(2): The warning threshold is violated
critical(3): The critical threshold is violated
invalid(4): Reading the environmental data failed
initial(5): No data environmental data was read yet"
::= { snMspsDiagnosticsUsageEntry 10 }
snMspsDiagnosticsUsageValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current load/usage value of the part"
::= { snMspsDiagnosticsUsageEntry 13 }
snMspsDiagnosticsUsageHighWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning threshold for the load/usage of the part. There will be a warning if SnMspsDiagnosticsUsageValue exceeds this value"
::= { snMspsDiagnosticsUsageEntry 16 }
snMspsDiagnosticsUsageHighCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Critical threshold for the load/usage of the part. There will be an alert if SnMspsDiagnosticsUsageValue exceeds this value"
::= { snMspsDiagnosticsUsageEntry 19 }
snMspsDiagnosticsTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMspsDiagnosticsTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Environmental data of the device and connected parts"
::= { snMspsDiagnostics 7}
snMspsDiagnosticsTemperatureEntry OBJECT-TYPE
SYNTAX SnMspsDiagnosticsTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A set of objects that contain temperature data of one part of the device"
INDEX { snMspsDiagnosticsTemperatureIndex }
::= {snMspsDiagnosticsTemperatureTable 1}
SnMspsDiagnosticsTemperatureEntry ::= SEQUENCE {
snMspsDiagnosticsTemperatureIndex Integer32,
snMspsDiagnosticsTemperaturePresent TruthValue,
snMspsDiagnosticsTemperatureName SnmpAdminString,
snMspsDiagnosticsTemperatureStatus INTEGER,
snMspsDiagnosticsTemperatureSensorStatus Integer32,
snMspsDiagnosticsTemperatureValue Integer32,
snMspsDiagnosticsTemperatureType Integer32,
snMspsDiagnosticsTemperatureScale Integer32,
snMspsDiagnosticsTemperaturePrecision Integer32,
snMspsDiagnosticsTemperatureUnitsDisplay SnmpAdminString,
snMspsDiagnosticsTemperatureTimeStamp Unsigned32,
snMspsDiagnosticsTemperatureUpdateRate Unsigned32,
snMspsDiagnosticsTemperatureHighWarning Integer32,
snMspsDiagnosticsTemperatureHighCritical Integer32,
snMspsDiagnosticsTemperatureLowWarning Integer32,
snMspsDiagnosticsTemperatureLowCritical Integer32
}
snMspsDiagnosticsTemperatureIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index variable"
::= { snMspsDiagnosticsTemperatureEntry 1 }
snMspsDiagnosticsTemperaturePresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows if a temperature value for the part is available"
::= { snMspsDiagnosticsTemperatureEntry 4 }
snMspsDiagnosticsTemperatureName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Original part description"
::= { snMspsDiagnosticsTemperatureEntry 7 }
snMspsDiagnosticsTemperatureStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
warning(2),
critical(3),
invalid(4),
initial(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status of the temperature read from the part
ok(1): No threshold is violated
warning(2): The warning threshold is violated
critical(3): The critical threshold is violated
invalid(4): Reading the environmental data failed
initial(5): No data environmental data was read yet"
::= { snMspsDiagnosticsTemperatureEntry 10 }
snMspsDiagnosticsTemperatureSensorStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the temperature sensor of the part"
::= { snMspsDiagnosticsTemperatureEntry 13 }
snMspsDiagnosticsTemperatureValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current temperature of the part"
::= { snMspsDiagnosticsTemperatureEntry 16 }
snMspsDiagnosticsTemperatureType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-SENSOR-MIB use; will always return 8 which stands for temperature in celsius"
::= { snMspsDiagnosticsTemperatureEntry 19 }
snMspsDiagnosticsTemperatureScale OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-SENSOR-MIB; will always return 8 which stands for celsius"
::= { snMspsDiagnosticsTemperatureEntry 22 }
snMspsDiagnosticsTemperaturePrecision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-MIB-use; will allways return 9 which stands for units"
::= { snMspsDiagnosticsTemperatureEntry 25 }
snMspsDiagnosticsTemperatureUnitsDisplay OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Stub for later ENTITY-SENSOR-MIB use"
::= { snMspsDiagnosticsTemperatureEntry 28 }
snMspsDiagnosticsTemperatureTimeStamp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp containing the last time a temperature measurement was taken"
::= { snMspsDiagnosticsTemperatureEntry 31 }
snMspsDiagnosticsTemperatureUpdateRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the interval between two measurements in seconds. Zero means, that an update has to be triggered manually"
::= { snMspsDiagnosticsTemperatureEntry 34 }
snMspsDiagnosticsTemperatureHighWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue exceeds this value"
::= { snMspsDiagnosticsTemperatureEntry 37 }
snMspsDiagnosticsTemperatureHighCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue exceeds this value"
::= { snMspsDiagnosticsTemperatureEntry 40 }
snMspsDiagnosticsTemperatureLowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue falls below this value"
::= { snMspsDiagnosticsTemperatureEntry 43 }
snMspsDiagnosticsTemperatureLowCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue falls below this value"
::= { snMspsDiagnosticsTemperatureEntry 46 }
-- -----------------------------------------------------------------
-- END OF ENV_DATA_DIAGNOSTICS Table
-- -----------------------------------------------------------------
END
View Git Blame Copy Permalink