1667 lines
61 KiB
Plaintext
1667 lines
61 KiB
Plaintext
-- Copyright (C) 2015 Aricent. All Rights Reserved
|
|
|
|
-- $Id: fspb.mib,v 1.17 2016/02/18 09:47:31 siva Exp $
|
|
|
|
ARICENT-PROVIDERBRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
OBJECT-TYPE,MODULE-IDENTITY,
|
|
Integer32, Unsigned32, Counter32, IpAddress, enterprises
|
|
FROM SNMPv2-SMI
|
|
RowStatus, MacAddress, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
VlanId, dot1qVlanIndex
|
|
FROM Q-BRIDGE-MIB
|
|
dot1adPepEntry FROM ARICENT-DOT1AD-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB;
|
|
|
|
futureProviderBridgeMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201505120000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
DESCRIPTION "||||||"
|
|
REVISION "201505120000Z"
|
|
DESCRIPTION "||||||"
|
|
::= { enterprises futuresoftware(2076) 113}
|
|
|
|
-- revision history
|
|
|
|
-- REVISION "201505120000Z"
|
|
-- DESCRIPTION
|
|
-- "Added fsPbInnerTPID to set inner tpid for all ports."
|
|
|
|
TunnelStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To specify how to handle the L2 protocol packets received on a
|
|
particular port.
|
|
|
|
When the option is set to 'peer', the L2 protocol packets received
|
|
on a particular port will be processed in the Bridge.
|
|
|
|
When the option is set to 'tunnel', the L2 protocol packets received
|
|
on a particular port will be transparently transmitted in the provider
|
|
network and will not be processed in the Provider Bridges/Provider Edge
|
|
Bridges.
|
|
|
|
When the option is set to 'discard', the L2 protocol packets
|
|
received over a particular port will not be processed and discarded."
|
|
|
|
SYNTAX INTEGER { peer(1), tunnel(2), discard(3) }
|
|
|
|
--Proprietary MIB implementation for the Provider Bridging functionality
|
|
|
|
fsPbSystem OBJECT IDENTIFIER ::= { futureProviderBridgeMIB 1 }
|
|
fsPbConfig OBJECT IDENTIFIER ::= { futureProviderBridgeMIB 2 }
|
|
|
|
-- SCALAR BEGIN
|
|
|
|
fsPbMulticastMacLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Multicast MAC table size of the device. The upper
|
|
limit value that can be SET for this object is limited by the
|
|
underlying hardware. While on initialisation this object hold
|
|
the maximum size of the Multicast MAC table of the device."
|
|
::= { fsPbSystem 1 }
|
|
|
|
fsPbTunnelStpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address to be used for Customer STP BPDUs tunneling inside
|
|
Provider Network.
|
|
When tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer BPDUs received
|
|
on a port where STP tunneling is enabled and the outgoing port is a
|
|
proprietary PNP.
|
|
|
|
Inside Provider Network, the BPDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
|
|
When the BPDU is sent out of the Provider Network, this MAC address
|
|
will be replaced with the reserved address defined for Customer STP
|
|
BPDUs.
|
|
This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
::= { fsPbSystem 2 }
|
|
|
|
fsPbTunnelLacpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address to be used for LACP packets tunneling inside Provider
|
|
Network. When tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer LACP packets
|
|
received over this port.
|
|
|
|
Inside Provider Network, LACP packets received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
|
|
When the tunneled LACP packets are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for LACP packets.
|
|
|
|
This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
::= { fsPbSystem 3 }
|
|
|
|
fsPbTunnelDot1xAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address to be used for Dot1x packets tunneling inside Provider
|
|
Network. When tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer Dot1x packets
|
|
received over this port.
|
|
|
|
Inside Provider Network, Dot1x packets received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
|
|
When the tunneled Dot1x packets are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for Dot1x packets.
|
|
This configuration is allowed only when the Bridge is configured in
|
|
Provider Code or Edge Bridge mode.
|
|
|
|
This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
|
|
::= { fsPbSystem 4 }
|
|
|
|
fsPbTunnelGvrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address to be used for GVRP PDUs tunneling inside Provider
|
|
Network. When tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer GVRP PDUs
|
|
received on a port where GVRP tunneling is enable and the outgoing
|
|
port is a proprietary PNP.
|
|
|
|
Inside Provider Network, GVRP PDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
|
|
When the tunneled GVRP PDUs are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for GVRP PDUs.
|
|
|
|
This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
::= { fsPbSystem 5 }
|
|
|
|
fsPbTunnelGmrpAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address to be used for GMRP PDUs tunneling inside Provider
|
|
Network. When tunneling is enabled on a port, this MAC address will be
|
|
used as the the destination MAC address of the customer GMRP PDUs
|
|
received over this port.
|
|
|
|
Inside Provider Network, GMRP PDUs received with this MAC address
|
|
will be treated as data packets and not processed.
|
|
|
|
When the tunneled GMRP PDUs are sent out of the Provider Network,
|
|
this MAC address will be replaced with the reserved address defined
|
|
for GMRP PDUs.
|
|
|
|
This configuration is allowed only for Provider Core or
|
|
Edge Bridges."
|
|
|
|
::= { fsPbSystem 6 }
|
|
|
|
|
|
fsPbInnerTPID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the Inner TPID type for all Ports."
|
|
|
|
DEFVAL { 33024 }
|
|
::= { fsPbSystem 7 }
|
|
|
|
|
|
-- SCALAR END
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Provider Bridge Port Type Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing provider bridge related
|
|
configurations for the externally accessible ports.
|
|
|
|
All the objects in this table are applicable
|
|
only when the Bridge Mode is set as ProviderBridge or
|
|
ProviderCoreBridge or ProviderEdgeBridge."
|
|
::= { fsPbConfig 1 }
|
|
|
|
fsPbPortInfoEntry OBJECT-TYPE
|
|
SYNTAX FsPbPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table specifies the Provider Bridge related
|
|
port configurations. This table is indexed by ifIndex."
|
|
|
|
INDEX { fsPbPort }
|
|
::= { fsPbPortInfoTable 1 }
|
|
|
|
FsPbPortInfoEntry ::=
|
|
SEQUENCE {
|
|
fsPbPort Integer32,
|
|
fsPbPortSVlanClassificationMethod INTEGER,
|
|
fsPbPortSVlanIngressEtherType Integer32,
|
|
fsPbPortSVlanEgressEtherType Integer32,
|
|
fsPbPortSVlanEtherTypeSwapStatus EnabledStatus,
|
|
fsPbPortSVlanTranslationStatus EnabledStatus,
|
|
fsPbPortUnicastMacLearning EnabledStatus,
|
|
fsPbPortUnicastMacLimit Unsigned32,
|
|
fsPbPortBundleStatus EnabledStatus,
|
|
fsPbPortMultiplexStatus EnabledStatus
|
|
}
|
|
|
|
fsPbPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Index value of the port in the system for which this entry
|
|
applies. The maximum index value of the port is defined by the
|
|
system."
|
|
::= { fsPbPortInfoEntry 1 }
|
|
|
|
|
|
fsPbPortSVlanClassificationMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sourceMac (1),
|
|
destinationMac (2),
|
|
cvlanSrcMac (3),
|
|
cvlanDstMac (4),
|
|
dscp (5),
|
|
cvlanDscp (6),
|
|
sourceIp (7),
|
|
destinationIp (8),
|
|
srcIpDstIp (9),
|
|
cvlanDstIp (10),
|
|
cvlan (11),
|
|
pvid (12)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of SVLAN classification that has to be used
|
|
for a given type of port.
|
|
|
|
providerNetworkPort / customerNetworkPort - Port's 'pvid' will be the
|
|
SVLAN classification for the untagged packets received over this interface.
|
|
|
|
customerEdgePort - The SVLAN classification mechanism is always based on
|
|
'cvlan' (i.e CVidRegistrationTable ). No other SVLAN classification
|
|
mechanism is
|
|
allowed for this port type.
|
|
|
|
propCustomerNetworkPort / propCustomerEdgePort - 'pvid' will be
|
|
default SVLAN classification mechanism for this port. But the user is
|
|
free to
|
|
configure any other SVLAN classification mechanism except the
|
|
CVidRegistrationTable (i.e. cvlan mechanism)
|
|
|
|
For proprietary CEP and proprietary CNP ports, the SVLAN classification
|
|
is based on one of the configured SVLAN classification methods mentioned
|
|
here. If it is not configured, by default the port's 'PVID' is considered
|
|
as the SVLAN for untagged packets."
|
|
|
|
::= { fsPbPortInfoEntry 2 }
|
|
|
|
fsPbPortSVlanIngressEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
" This object indicates the primary S-VLAN tag ether type used for the packets
|
|
received on this port.Packets received on a port are considered tagged,
|
|
when the packet ethertype matches with the port ether type configured.
|
|
Otherwise, they will be considered untagged.
|
|
|
|
By default, on all the ports, 0x88a8 will be configured as the
|
|
ether type.
|
|
On Proprietary Provider Network Ports 0x8100 will be configured
|
|
as
|
|
the ingress ethertype.
|
|
|
|
This object is deprecated. The new MIB object dot1qFutureVlanPortIngressEtherType
|
|
indicates the Ingress Ethertype for a port."
|
|
|
|
DEFVAL { 34984 }
|
|
::= { fsPbPortInfoEntry 3 }
|
|
|
|
fsPbPortSVlanEgressEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the ether type of the S-VLAN tag that has to
|
|
be applied for all the outgoing packets on this port. If a valid value is
|
|
in this object, all the packets which are outgoing on this port will
|
|
contain the ether type as configured in this object. By Default 0x88a8
|
|
will be used for packets transmitted with S-VLAN on the ports.
|
|
On Proprietary Provider Network Ports and Customer Edge Ports, 0x8100
|
|
will be used as the ether type for the outgoing packets.
|
|
|
|
This object is deprecated. The new MIB object dot1qFutureVlanPortEgressEtherType
|
|
indicates the Egress Ethertype for a port."
|
|
|
|
DEFVAL { 34984 }
|
|
::= { fsPbPortInfoEntry 4}
|
|
|
|
fsPbPortSVlanEtherTypeSwapStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the Ether Type Swapping can be
|
|
applied on the S-VLAN tagged packets over this port.
|
|
The Ether type swapping will only be applied on S-VLAN tag of a packet.
|
|
This configuration is applicable for all values of Port Type other
|
|
than customer edge ports."
|
|
DEFVAL { disabled }
|
|
::= { fsPbPortInfoEntry 5 }
|
|
|
|
fsPbPortSVlanTranslationStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the VID Translation table can be
|
|
enabled on the incoming/outgoing packets on a particular port.
|
|
The Service Vlan swapping is applicable only for the externally
|
|
Accesible network ports (i.e.) Provider Network Port, Customer
|
|
Network port
|
|
and proprietary Customer Network Port. The Service Vlan Translation status
|
|
can be enabled or disabled on per port basis. By default, it is enabled on
|
|
Provider Network Port and Customer Network Port(S-Tagged) and disabled on
|
|
the other applicable port-types."
|
|
::= { fsPbPortInfoEntry 6 }
|
|
|
|
fsPbPortUnicastMacLearning OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A Truth value indicating the unicast MAC learning enabled/disabled
|
|
status for this port. When Unicast Mac Learning is disabled, No
|
|
Entry will be learned from the point of configuration on this port.
|
|
When Mac Learning is enabled, Entries will be learned on this port."
|
|
DEFVAL { enabled }
|
|
::= { fsPbPortInfoEntry 7 }
|
|
|
|
fsPbPortUnicastMacLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Limiting value on the number of distinct unicast destination MAC
|
|
addresses that can be dynamically learnt over this interface.
|
|
The lower limit and upper limit value that can be SET for this
|
|
object
|
|
is determined by the underlying hardware. This Limit is applicable
|
|
for
|
|
only dynamically learned entries and NOT for static unicast
|
|
entries."
|
|
::= { fsPbPortInfoEntry 8 }
|
|
|
|
fsPbPortBundleStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Truth value indicating that Bundling enabled/disabled on port,
|
|
this Object can be enabled/disabled only for CEP. For other ports
|
|
setting and getting is not meaningful."
|
|
DEFVAL { enabled }
|
|
::= { fsPbPortInfoEntry 9 }
|
|
|
|
fsPbPortMultiplexStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Truth value indicating that Bundling enabled/disabled on port,
|
|
this Object can be enabled/disabled only for CEP. For other ports
|
|
setting and getting is not meaningful."
|
|
DEFVAL { enabled }
|
|
::= { fsPbPortInfoEntry 10 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , SourceMAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbSrcMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per SourceMAC based Service VLAN
|
|
classification information in the device. Entries can be configured
|
|
into this table only when the bridge is configured as a
|
|
Provider Bridge and the Port Type for this port is SET
|
|
as Proprietary Customer Edge Port / Proprietary Customer Network Port."
|
|
::= { fsPbConfig 2 }
|
|
|
|
fsPbSrcMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this
|
|
specified port for an ingress frame with the specified Source
|
|
MAC address in the ethernet header of the frame."
|
|
INDEX { fsPbPort, fsPbSrcMacAddress }
|
|
::= { fsPbSrcMacSVlanTable 1 }
|
|
|
|
FsPbSrcMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbSrcMacAddress MacAddress,
|
|
fsPbSrcMacSVlan VlanId,
|
|
fsPbSrcMacRowStatus RowStatus
|
|
}
|
|
|
|
fsPbSrcMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source MAC address present in the ethernet header of the
|
|
frame received on this port for which Service VLAN is assigned
|
|
based on this entry."
|
|
::= { fsPbSrcMacSVlanEntry 1 }
|
|
|
|
fsPbSrcMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames received on this port when
|
|
the Source MAC address in the ethernet header of the frame is same
|
|
as specified in this entry."
|
|
::= { fsPbSrcMacSVlanEntry 2 }
|
|
|
|
fsPbSrcMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table will
|
|
be deleted when this object is SET 'destroy'."
|
|
::= { fsPbSrcMacSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , DestinationMAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbDstMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per Destination MAC based Service
|
|
VLAN classification information in the device. Entries can be
|
|
configured into this table only when the bridge is configured
|
|
as a Provider Bridge. An entry in this table is possible only when the
|
|
'Port Type' for this port is SET as Proprietary Customer Network Port
|
|
or Proprietary Customer Edge Port."
|
|
::= { fsPbConfig 3 }
|
|
|
|
fsPbDstMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this
|
|
specified port for an ingress frame with the
|
|
specified Destination MAC address in the ethernet header of the frame."
|
|
INDEX { fsPbPort, fsPbDstMacAddress }
|
|
::= { fsPbDstMacSVlanTable 1 }
|
|
|
|
FsPbDstMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbDstMacAddress MacAddress,
|
|
fsPbDstMacSVlan VlanId,
|
|
fsPbDstMacRowStatus RowStatus
|
|
}
|
|
|
|
fsPbDstMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Destination MAC address present in the ethernet header of the
|
|
frame received on this port for which Service VLAN is assigned
|
|
based on this entry."
|
|
::= { fsPbDstMacSVlanEntry 1 }
|
|
|
|
|
|
fsPbDstMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames received on this port when
|
|
the Destination MAC address in the ethernet header of the frame is
|
|
same as specified in this entry."
|
|
::= { fsPbDstMacSVlanEntry 2 }
|
|
|
|
fsPbDstMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
::= { fsPbDstMacSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , C-VLAN, Source MAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbCVlanSrcMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbCVlanSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per Port, per Customer VLAN ID,
|
|
per Source MAC based S-VLAN classification information in the device.
|
|
Entries can be configured into this table only when the bridge is
|
|
configured as a Provider Bridge. An entry in this table is
|
|
possible only when the 'PortType' for this port is SET as
|
|
Proprietary Customer Edge Port / Proprietary Customer Network Port."
|
|
::= { fsPbConfig 4 }
|
|
|
|
fsPbCVlanSrcMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbCVlanSrcMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this specified
|
|
port for an ingress frame with the classified Customer VLAN ID and
|
|
with the specified Source MAC address in the ethernet header of the frame.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsPbPort, fsPbCVlanSrcMacCVlan, fsPbCVlanSrcMacAddr }
|
|
::= { fsPbCVlanSrcMacSVlanTable 1 }
|
|
|
|
FsPbCVlanSrcMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbCVlanSrcMacCVlan VlanId,
|
|
fsPbCVlanSrcMacAddr MacAddress,
|
|
fsPbCVlanSrcMacSVlan VlanId,
|
|
fsPbCVlanSrcMacRowStatus RowStatus
|
|
}
|
|
|
|
fsPbCVlanSrcMacCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
|
|
at this specified port OR the Customer VLAN ID for which the ingress
|
|
frame is classified to this specified port."
|
|
::= { fsPbCVlanSrcMacSVlanEntry 1 }
|
|
|
|
fsPbCVlanSrcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source MAC address in the ethernet header of the
|
|
frame received on this port."
|
|
::= { fsPbCVlanSrcMacSVlanEntry 2 }
|
|
|
|
fsPbCVlanSrcMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN assigned to frames received on this port,
|
|
When the Classified Customer VLAN ID is same as specified in
|
|
this entry and When the Source MAC address in the ethernet header
|
|
of the frame is same as specified in this entry.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
::= { fsPbCVlanSrcMacSVlanEntry 3 }
|
|
|
|
fsPbCVlanSrcMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsPbCVlanSrcMacSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , C-VLAN, Destination MAC based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbCVlanDstMacSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbCVlanDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per Port, per Customer VLAN ID,
|
|
per Destination MAC based S-VLAN classification information in the
|
|
device. Entries can be configured into this table only when the
|
|
bridge is configured as a Provider Bridge. An entry in this table
|
|
is possible only when the 'Port Type' for this port is SET
|
|
as Proprietary Customer Edge Port / Proprietary Customer Network Port."
|
|
|
|
::= { fsPbConfig 5 }
|
|
|
|
fsPbCVlanDstMacSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbCVlanDstMacSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this specified
|
|
port for an ingress frame with the classified Customer VLAN ID and
|
|
with the specified Destination MAC address in the ethernet header of
|
|
the frame.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsPbPort, fsPbCVlanDstMacCVlan, fsPbCVlanDstMacAddr }
|
|
::= { fsPbCVlanDstMacSVlanTable 1 }
|
|
|
|
FsPbCVlanDstMacSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbCVlanDstMacCVlan VlanId,
|
|
fsPbCVlanDstMacAddr MacAddress,
|
|
fsPbCVlanDstMacSVlan VlanId,
|
|
fsPbCVlanDstMacRowStatus RowStatus
|
|
}
|
|
|
|
fsPbCVlanDstMacCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
|
|
at this specified port or the Customer VLAN ID for which the ingress
|
|
frame is classified for at this specified port."
|
|
::= { fsPbCVlanDstMacSVlanEntry 1 }
|
|
|
|
fsPbCVlanDstMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Destination MAC address in the ethernet header of the
|
|
frame received on this port."
|
|
::= { fsPbCVlanDstMacSVlanEntry 2 }
|
|
|
|
fsPbCVlanDstMacSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN assigned to frames received on this port
|
|
when the Classified Customer VLAN ID and when the Destination
|
|
MAC address in the ethernet header of the frame is same as
|
|
specified in this entry.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
::= { fsPbCVlanDstMacSVlanEntry 3 }
|
|
|
|
fsPbCVlanDstMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsPbCVlanDstMacSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port , DSCP based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbDscpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per DiffServ Code Point (DSCP) value
|
|
based Service VLAN classification information in the device.
|
|
Entries can be configured into this table only when the bridge is
|
|
configured as a Provider Bridge and the 'PortType' for
|
|
this port is SET as Proprietary Customer Network Port or
|
|
Proprietary Customer Edge Port."
|
|
|
|
::= { fsPbConfig 6 }
|
|
|
|
fsPbDscpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this
|
|
specified port for an ingress IP frame with the DSCP value as
|
|
specified in this entry."
|
|
INDEX { fsPbPort, fsPbDscp }
|
|
::= { fsPbDscpSVlanTable 1 }
|
|
|
|
FsPbDscpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbDscp Integer32,
|
|
fsPbDscpSVlan VlanId,
|
|
fsPbDscpRowStatus RowStatus
|
|
}
|
|
|
|
fsPbDscp OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value in the IP header of the frame received on
|
|
this port for which Service VLAN is assigned based on this entry."
|
|
::= { fsPbDscpSVlanEntry 1 }
|
|
|
|
|
|
fsPbDscpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to IP frames received on this port
|
|
when the DSCP value in the IP header of the frame is same as
|
|
specified in this entry."
|
|
::= { fsPbDscpSVlanEntry 2 }
|
|
|
|
fsPbDscpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsPbDscpSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,C-VLAN and DSCP based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbCVlanDscpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbCVlanDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per Customer VLAN ID, per DiffServ Code
|
|
Point (DSCP) value based Service VLAN classification information in
|
|
the device. Entries can be configured into this table only when the
|
|
bridge is configured as a Provider Bridge and the 'PortType' for
|
|
this port is SET as Proprietary Customer Edge Port / Proprietary Customer
|
|
Network Port."
|
|
|
|
::= { fsPbConfig 7 }
|
|
|
|
fsPbCVlanDscpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbCVlanDscpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this
|
|
specified port for an ingress IP frame with the classified
|
|
Customer VLAN ID as specified in this entry and the DSCP value
|
|
in the frame as specified in this entry.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsPbPort, fsPbCVlanDscpCVlan, fsPbCVlanDscp }
|
|
::= { fsPbCVlanDscpSVlanTable 1 }
|
|
|
|
FsPbCVlanDscpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbCVlanDscpCVlan VlanId,
|
|
fsPbCVlanDscp Integer32,
|
|
fsPbCVlanDscpSVlan VlanId,
|
|
fsPbCVlanDscpRowStatus RowStatus
|
|
}
|
|
|
|
fsPbCVlanDscpCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
|
|
at this specified port or the Customer VLAN ID for which the ingress
|
|
frame is classified for at this specified port."
|
|
::= { fsPbCVlanDscpSVlanEntry 1 }
|
|
|
|
fsPbCVlanDscp OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value in the IP header of the frame received on
|
|
this port."
|
|
::= { fsPbCVlanDscpSVlanEntry 2 }
|
|
|
|
|
|
fsPbCVlanDscpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames received on this port,
|
|
when the classified Customer VLAN ID is the same as specified in
|
|
this entry and when the DSCP value in the IP header of the frame
|
|
is same as specified in this entry.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
::= { fsPbCVlanDscpSVlanEntry 3 }
|
|
|
|
fsPbCVlanDscpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsPbCVlanDscpSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,Source IP Address based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbSrcIpAddrSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbSrcIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per Source IP Address, based Service VLAN
|
|
classification information in the device. Entries can be configured
|
|
into this table only when the bridge is configured as a Provider
|
|
Bridge and the 'PortType' for this port is SET as
|
|
Proprietary Customer Network Port or Proprietary Customer Edge Port."
|
|
::= { fsPbConfig 8 }
|
|
|
|
fsPbSrcIpAddrSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbSrcIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this
|
|
specified port for an ingress IP frame with the Source IP Address
|
|
in the IP header of the frame as specified in this entry."
|
|
INDEX { fsPbPort, fsPbSrcIpAddr }
|
|
::= { fsPbSrcIpAddrSVlanTable 1 }
|
|
|
|
FsPbSrcIpAddrSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbSrcIpAddr IpAddress,
|
|
fsPbSrcIpSVlan VlanId,
|
|
fsPbSrcIpRowStatus RowStatus
|
|
}
|
|
|
|
fsPbSrcIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsPbSrcIpAddrSVlanEntry 1 }
|
|
|
|
fsPbSrcIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames ingress at this port
|
|
when the Source IP address in the IP header of the frame is
|
|
same as specified in this entry."
|
|
::= { fsPbSrcIpAddrSVlanEntry 2 }
|
|
|
|
fsPbSrcIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsPbSrcIpAddrSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,Destination IP Address based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbDstIpAddrSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbDstIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per Destination IP Address, based
|
|
Service VLAN classification information in the device. Entries can
|
|
be configured into this table only when the bridge is configured as
|
|
a Provider Bridge and the 'PortType' for this port is SET
|
|
as Proprietary Customer Network Port or Proprietary Customer Edge Port."
|
|
::= { fsPbConfig 9 }
|
|
|
|
fsPbDstIpAddrSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbDstIpAddrSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this
|
|
specified port for an ingress IP frame with the Destination IP
|
|
Address in the IP header of the frame as specified in this entry."
|
|
INDEX { fsPbPort, fsPbDstIpAddr }
|
|
::= { fsPbDstIpAddrSVlanTable 1 }
|
|
|
|
FsPbDstIpAddrSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbDstIpAddr IpAddress,
|
|
fsPbDstIpSVlan VlanId,
|
|
fsPbDstIpRowStatus RowStatus
|
|
}
|
|
|
|
fsPbDstIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Destination IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsPbDstIpAddrSVlanEntry 1 }
|
|
|
|
fsPbDstIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames ingress at this port
|
|
when the Destination IP address in the IP header of the frame is
|
|
same as specified in this entry."
|
|
::= { fsPbDstIpAddrSVlanEntry 2 }
|
|
|
|
fsPbDstIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
::= { fsPbDstIpAddrSVlanEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,SourceIP Address, DestinationIP Address based
|
|
-- Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbSrcDstIpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbSrcDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per Source IP Address, per Destination
|
|
IP Address based Service VLAN classification information in the
|
|
device. Entries can be configured into this table only when the bridge
|
|
is configured as a Provider Bridge and the'PortType' for
|
|
this port is SET as Proprietary Customer Network Port or Proprietary
|
|
Customer Edge Port."
|
|
::= { fsPbConfig 10}
|
|
|
|
fsPbSrcDstIpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbSrcDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this
|
|
specified port for an ingress IP frame with the Source and Destination
|
|
IP Address in the IP header of the frame as specified in this entry."
|
|
INDEX { fsPbPort, fsPbSrcDstSrcIpAddr, fsPbSrcDstDstIpAddr }
|
|
::= { fsPbSrcDstIpSVlanTable 1 }
|
|
|
|
FsPbSrcDstIpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbSrcDstSrcIpAddr IpAddress,
|
|
fsPbSrcDstDstIpAddr IpAddress,
|
|
fsPbSrcDstIpSVlan VlanId,
|
|
fsPbSrcDstIpRowStatus RowStatus
|
|
}
|
|
|
|
fsPbSrcDstSrcIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsPbSrcDstIpSVlanEntry 1 }
|
|
|
|
fsPbSrcDstDstIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Destination IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsPbSrcDstIpSVlanEntry 2 }
|
|
|
|
|
|
fsPbSrcDstIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames ingress at this port
|
|
when the Source and Destination IP address in the IP header of
|
|
the frame are same as specified in this entry."
|
|
::= { fsPbSrcDstIpSVlanEntry 3 }
|
|
|
|
fsPbSrcDstIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsPbSrcDstIpSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The S-VLAN Port ,Customer VLAN ID, Destination IP Address based
|
|
-- Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbCVlanDstIpSVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbCVlanDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing per port, per Customer VLAN ID, per Destination
|
|
IP Address, based Service VLAN classification information in the
|
|
device. Entries can be configured into this table only when the bridge
|
|
is configured as Provider Bridge or Provider Edge Bridge and the
|
|
Port Type for this port is SET as Proprietary Customer Edge Port
|
|
/ Proprietary Customer Network Port."
|
|
::= { fsPbConfig 11 }
|
|
|
|
fsPbCVlanDstIpSVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbCVlanDstIpSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information controlling Service VLAN classification at this specified
|
|
port for an ingress IP frame with the classified Customer VLAN ID as
|
|
specified in this entry and the Destination IP Address in the IP header
|
|
of the frame as specified in this entry.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
INDEX { fsPbPort, fsPbCVlanDstIpCVlan, fsPbCVlanDstIp }
|
|
::= { fsPbCVlanDstIpSVlanTable 1 }
|
|
|
|
FsPbCVlanDstIpSVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbCVlanDstIpCVlan VlanId,
|
|
fsPbCVlanDstIp IpAddress,
|
|
fsPbCVlanDstIpSVlan VlanId,
|
|
fsPbCVlanDstIpRowStatus RowStatus
|
|
}
|
|
|
|
fsPbCVlanDstIpCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Customer VLAN ID in the Customer VLAN tag of an ingress frame
|
|
at this specified port or the Customer VLAN ID for which the ingress
|
|
frame is classified for at this specified port."
|
|
::= { fsPbCVlanDstIpSVlanEntry 1 }
|
|
|
|
fsPbCVlanDstIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Destination IP Address in the IP header of an ingress
|
|
IP frame at this specified port."
|
|
::= { fsPbCVlanDstIpSVlanEntry 2 }
|
|
|
|
fsPbCVlanDstIpSVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service VLAN ID assigned to frames ingress at this port
|
|
when the classified Customer VLAN ID is same as specified in this entry
|
|
and the Destination IP address in the IP header of the frame is same
|
|
as specified in this entry.
|
|
|
|
Classification of Customer VLAN ID may be from the Customer VLAN tag
|
|
in the received frame OR based on Port CVLAN table."
|
|
::= { fsPbCVlanDstIpSVlanEntry 3 }
|
|
|
|
fsPbCVlanDstIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
deleted when this object is SET 'destroy'."
|
|
|
|
::= { fsPbCVlanDstIpSVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The C-VLAN Port based Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbPortBasedCVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbPortBasedCVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing Customer Edge Port / Proprietary Customer Edge Port /
|
|
Proprietary Customer Network Port mapping to Customer VLAN on a
|
|
providerBridge. This table is used for a classifying a untagged frame
|
|
received on above mentioned customer ports."
|
|
::= { fsPbConfig 12 }
|
|
|
|
fsPbPortBasedCVlanEntry OBJECT-TYPE
|
|
SYNTAX FsPbPortBasedCVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Entry in this table will be created whenever a port is configured as
|
|
Customer Edge Port / Proprietary Customer Edge Port / Proprietary
|
|
Customer
|
|
Network Port. This Entry will be used on the ingress frame on the
|
|
specified
|
|
ports based on enabled status for classifying the frame to CVLAN. Also
|
|
the Entry will be deleted in this table, when the port type is modified
|
|
anything other than the specified one."
|
|
INDEX { fsPbPort }
|
|
::= { fsPbPortBasedCVlanTable 1 }
|
|
|
|
FsPbPortBasedCVlanEntry ::=
|
|
SEQUENCE {
|
|
fsPbPortCVlan VlanId,
|
|
fsPbPortCVlanClassifyStatus EnabledStatus,
|
|
fsPbPortCVlanPriority Integer32,
|
|
fsPbPortEgressUntaggedStatus INTEGER
|
|
}
|
|
|
|
fsPbPortCVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Customer VLAN ID assigned to untagged frames ingress at this
|
|
specified Customer Edge Port / Proprietary Customer Edge Port /
|
|
Proprietary Customer Network Port."
|
|
::= { fsPbPortBasedCVlanEntry 1 }
|
|
|
|
fsPbPortCVlanClassifyStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate C-VLAN classification status on a port.
|
|
This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP,
|
|
this object cannot be disabled."
|
|
DEFVAL { enabled }
|
|
::= { fsPbPortBasedCVlanEntry 2 }
|
|
|
|
fsPbPortCVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port priority is assigned to untagged frames ingress at this
|
|
specified Customer Edge Port / Proprietary Customer Edge Port /
|
|
Proprietary Customer Network Port."
|
|
::= { fsPbPortBasedCVlanEntry 3 }
|
|
|
|
|
|
fsPbPortEgressUntaggedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { allow(1), deny(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether to allow or drop untagged packets
|
|
from being transmitted on CEP port. When it is set to allow, untagged packets
|
|
will be allowed to be transmitted on CEP port. By default, the object is set
|
|
to deny which will drop untagged packets from being transmitted on CEP port."
|
|
DEFVAL { deny }
|
|
::= { fsPbPortBasedCVlanEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- EtherType SwappingTable
|
|
-- -------------------------------------------------------------
|
|
|
|
fsPbEtherTypeSwapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbEtherTypeSwapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Table containing the Translation information of the ethertype for a
|
|
Service VLAN in a given packet. This Table shall be used only at ingress
|
|
and NOT at egress of the Customer Network Port / Proprietary Customer Network
|
|
Port / Provider Network Port.
|
|
This translation table is applicable for only Service VLAN and not
|
|
for customer VLAN's."
|
|
::= { fsPbConfig 13 }
|
|
|
|
fsPbEtherTypeSwapEntry OBJECT-TYPE
|
|
SYNTAX FsPbEtherTypeSwapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry containing the Local and Relay Ether type for a given packet on
|
|
a particular port. This entry shall be applicable on all types of ports
|
|
if and only if fsPbPortSVlanEtherTypeSwapStatus is Enabled on that Port."
|
|
INDEX { fsPbPort, fsPbLocalEtherType}
|
|
::= { fsPbEtherTypeSwapTable 1 }
|
|
|
|
FsPbEtherTypeSwapEntry ::=
|
|
SEQUENCE {
|
|
fsPbLocalEtherType Integer32,
|
|
fsPbRelayEtherType Integer32,
|
|
fsPbEtherTypeSwapRowStatus RowStatus
|
|
}
|
|
|
|
fsPbLocalEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ether type present in the service vlan tag of the ingress packet at
|
|
the given port."
|
|
::= { fsPbEtherTypeSwapEntry 1 }
|
|
|
|
fsPbRelayEtherType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Relay Ether type mapped for the ether type present in the local
|
|
service vlan tag of the ingress packet at the given port."
|
|
::= { fsPbEtherTypeSwapEntry 2 }
|
|
|
|
fsPbEtherTypeSwapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. An entry is
|
|
created in this table when this object is SET to 'createAndWait'.
|
|
The entry in this table is used when the status of this object
|
|
is SET 'active'. The entry in this table is not used when this
|
|
object is SET 'notInService'. An entry created in this table is
|
|
be deleted when this object is SET 'destroy'."
|
|
::= { fsPbEtherTypeSwapEntry 3 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- S-VLAN configuration table
|
|
-- ----------------------------------------------------------------
|
|
fsPbSVlanConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbSVlanConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table to configure the service type supported by an S-VLAN. Based
|
|
on the service type configured for the S-VLAN, the oper point-to-point
|
|
state of PEP ports will be determined."
|
|
::= { fsPbConfig 14 }
|
|
|
|
fsPbSVlanConfigEntry OBJECT-TYPE
|
|
SYNTAX FsPbSVlanConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The service type can be configured for an S-VLAN only when the VLAN
|
|
is already created in the system."
|
|
|
|
INDEX {dot1qVlanIndex}
|
|
::= { fsPbSVlanConfigTable 1 }
|
|
|
|
FsPbSVlanConfigEntry ::=
|
|
SEQUENCE {
|
|
fsPbSVlanConfigServiceType INTEGER
|
|
}
|
|
|
|
fsPbSVlanConfigServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eLine (1),
|
|
eLan (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object to specify the service type supported by the S-VLAN. When
|
|
it is set to 'eLine', the S-VLAN connects not more than two customer
|
|
interfaces. If the service type for a vlan is 'eLine', then learning
|
|
member ports through GVRP will not be allowed.
|
|
|
|
Hence the oper point-to-point state of the PEPs connecting the S-VLAN can
|
|
be set to True.
|
|
|
|
When it is set to 'eLan', the S-VLAN connects more than two customer
|
|
interfaces.So the oper point-to-point state of the PEPs connecting the
|
|
S-VLAN will be set to False.
|
|
|
|
In case of IVL, When the service type is set to E-Line for a VLAN,
|
|
the MAC learning status will be set to 'disabled'. When it is set
|
|
to E-LAN, MAC learning status will be enabled for that VLAN."
|
|
|
|
|
|
::= { fsPbSVlanConfigEntry 1 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Tunnel protocol configuration table
|
|
-- ----------------------------------------------------------------
|
|
fsPbTunnelProtocolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This table contains information about the handling (Tunnel/Peer/
|
|
Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x
|
|
and IGMP) inside service provider network.
|
|
This table is supported only for Provider Core or Provider Edge
|
|
Bridges."
|
|
|
|
::= { fsPbConfig 15 }
|
|
|
|
fsPbTunnelProtocolEntry OBJECT-TYPE
|
|
SYNTAX FsPbTunnelProtocolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
|
|
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port."
|
|
INDEX { fsPbPort }
|
|
::= { fsPbTunnelProtocolTable 1 }
|
|
|
|
FsPbTunnelProtocolEntry ::=
|
|
SEQUENCE {
|
|
fsPbTunnelProtocolDot1x TunnelStatus,
|
|
fsPbTunnelProtocolLacp TunnelStatus,
|
|
fsPbTunnelProtocolStp TunnelStatus,
|
|
fsPbTunnelProtocolGvrp TunnelStatus,
|
|
fsPbTunnelProtocolGmrp TunnelStatus,
|
|
fsPbTunnelProtocolIgmp TunnelStatus
|
|
}
|
|
|
|
fsPbTunnelProtocolDot1x OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the Dot1x packets
|
|
received on this port."
|
|
::= { fsPbTunnelProtocolEntry 1 }
|
|
|
|
fsPbTunnelProtocolLacp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the LACP packets
|
|
received on this port."
|
|
::= { fsPbTunnelProtocolEntry 2 }
|
|
|
|
fsPbTunnelProtocolStp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the STP packets
|
|
received on this port."
|
|
::= { fsPbTunnelProtocolEntry 3 }
|
|
|
|
fsPbTunnelProtocolGvrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the GVRP packets
|
|
received on this port."
|
|
::= { fsPbTunnelProtocolEntry 4 }
|
|
|
|
fsPbTunnelProtocolGmrp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the GMRP packets
|
|
received on this port."
|
|
::= { fsPbTunnelProtocolEntry 5 }
|
|
|
|
fsPbTunnelProtocolIgmp OBJECT-TYPE
|
|
SYNTAX TunnelStatus
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The object to specify whether to peer/tunnel/discard the IGMP packets
|
|
received on this port."
|
|
::= { fsPbTunnelProtocolEntry 6 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Tunnel protocol statistics table
|
|
-- ----------------------------------------------------------------
|
|
fsPbTunnelProtocolStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbTunnelProtocolStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This table contains statistics information about the tunneled
|
|
Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received
|
|
and transmitted over a port."
|
|
::= { fsPbConfig 16 }
|
|
|
|
fsPbTunnelProtocolStatsEntry OBJECT-TYPE
|
|
SYNTAX FsPbTunnelProtocolStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2
|
|
protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port.
|
|
|
|
This table is supported only for Provider Core or Provider Edge
|
|
Bridges."
|
|
|
|
INDEX { fsPbPort }
|
|
::= { fsPbTunnelProtocolStatsTable 1 }
|
|
|
|
FsPbTunnelProtocolStatsEntry ::=
|
|
SEQUENCE {
|
|
fsPbTunnelProtocolDot1xPktsRecvd Counter32,
|
|
fsPbTunnelProtocolDot1xPktsSent Counter32,
|
|
fsPbTunnelProtocolLacpPktsRecvd Counter32,
|
|
fsPbTunnelProtocolLacpPktsSent Counter32,
|
|
fsPbTunnelProtocolStpPDUsRecvd Counter32,
|
|
fsPbTunnelProtocolStpPDUsSent Counter32,
|
|
fsPbTunnelProtocolGvrpPDUsRecvd Counter32,
|
|
fsPbTunnelProtocolGvrpPDUsSent Counter32,
|
|
fsPbTunnelProtocolGmrpPktsRecvd Counter32,
|
|
fsPbTunnelProtocolGmrpPktsSent Counter32,
|
|
fsPbTunnelProtocolIgmpPktsRecvd Counter32,
|
|
fsPbTunnelProtocolIgmpPktsSent Counter32
|
|
}
|
|
|
|
fsPbTunnelProtocolDot1xPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled Dot1x Packets received."
|
|
::= { fsPbTunnelProtocolStatsEntry 1 }
|
|
|
|
fsPbTunnelProtocolDot1xPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled Dot1x Packets transmitted."
|
|
::= { fsPbTunnelProtocolStatsEntry 2 }
|
|
|
|
fsPbTunnelProtocolLacpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled LACP Packets received."
|
|
::= { fsPbTunnelProtocolStatsEntry 3 }
|
|
|
|
fsPbTunnelProtocolLacpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled LACP packets transmitted."
|
|
::= { fsPbTunnelProtocolStatsEntry 4 }
|
|
|
|
fsPbTunnelProtocolStpPDUsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled STP PDUs received."
|
|
::= { fsPbTunnelProtocolStatsEntry 5 }
|
|
|
|
fsPbTunnelProtocolStpPDUsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled STP PDUs transmitted."
|
|
::= { fsPbTunnelProtocolStatsEntry 6 }
|
|
|
|
fsPbTunnelProtocolGvrpPDUsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled GVRP PDUs received."
|
|
::= { fsPbTunnelProtocolStatsEntry 7 }
|
|
|
|
fsPbTunnelProtocolGvrpPDUsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled GVRP PDUs transmitted."
|
|
::= { fsPbTunnelProtocolStatsEntry 8 }
|
|
|
|
fsPbTunnelProtocolGmrpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled GMRP PDUs packets received."
|
|
::= { fsPbTunnelProtocolStatsEntry 9 }
|
|
|
|
fsPbTunnelProtocolGmrpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled GMRP packets transmitted."
|
|
::= { fsPbTunnelProtocolStatsEntry 10 }
|
|
|
|
fsPbTunnelProtocolIgmpPktsRecvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled IGMP packets received."
|
|
::= { fsPbTunnelProtocolStatsEntry 11 }
|
|
|
|
fsPbTunnelProtocolIgmpPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of tunneled IGMP packets transmitted."
|
|
::= { fsPbTunnelProtocolStatsEntry 12 }
|
|
|
|
-- ----------------------------------------------------------------
|
|
-- Provider Edge Port configuration table
|
|
-- ----------------------------------------------------------------
|
|
|
|
fsPbPepExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsPbPepExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an extention of dot1adPepTable table, and it provides
|
|
additional configurations to PEPs (like Cos Preservations,..).
|
|
when a entry in dot1adPepTable is created, then an entry will be
|
|
created in this table."
|
|
|
|
::= { fsPbConfig 17 }
|
|
|
|
fsPbPepExtEntry OBJECT-TYPE
|
|
SYNTAX FsPbPepExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Entry contains information like (COS preservation, ..) for the
|
|
internal PEPs. Creation of an entry in this table is not allowed
|
|
and only modification is allowed."
|
|
|
|
AUGMENTS { dot1adPepEntry }
|
|
::= { fsPbPepExtTable 1 }
|
|
|
|
FsPbPepExtEntry ::=
|
|
SEQUENCE {
|
|
fsPbPepExtCosPreservation EnabledStatus
|
|
}
|
|
|
|
fsPbPepExtCosPreservation OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable or disable COS preservation for a
|
|
service provided by this PEP."
|
|
|
|
DEFVAL { disabled }
|
|
::= { fsPbPepExtEntry 1 }
|
|
|
|
END
|