760 lines
26 KiB
Plaintext
760 lines
26 KiB
Plaintext
-- extracted from draft-dolnik-usb-mib-02.txt
|
|
-- at Thu Aug 10 07:08:29 2000
|
|
|
|
USB-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
Integer32,
|
|
experimental
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION,
|
|
MacAddress,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB;
|
|
|
|
usbMib MODULE-IDENTITY
|
|
LAST-UPDATED "200008070000Z" -- August 07, 2000
|
|
ORGANIZATION "3Com"
|
|
CONTACT-INFO
|
|
" Benjamin Dolnik
|
|
Postal: 3Com Corporation
|
|
3800 Golf Road
|
|
Rolling Meadows, IL 60008
|
|
USA
|
|
Phone: +1 847 262 2098
|
|
E-mail: benjamin-dolnik@3com.com"
|
|
DESCRIPTION
|
|
"The MIB module to describe the USB interface."
|
|
::= { experimental 103 }
|
|
|
|
|
|
-- Generic information
|
|
|
|
usbMibObjects OBJECT IDENTIFIER ::= { usbMib 1 }
|
|
|
|
usbNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports regardless of their current state
|
|
in the usb general port table"
|
|
::= { usbMibObjects 1 }
|
|
--
|
|
-- usb Generic Port Table
|
|
--
|
|
usbPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsbPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port entries. The number of entries is given
|
|
by the value usbNumber."
|
|
::= { usbMibObjects 2 }
|
|
|
|
usbPortEntry OBJECT-TYPE
|
|
SYNTAX UsbPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status and parameter values for the USB port."
|
|
INDEX { usbPortIndex }
|
|
::= { usbPortTable 1 }
|
|
|
|
UsbPortEntry ::= SEQUENCE {
|
|
usbPortIndex
|
|
Integer32,
|
|
usbPortType
|
|
INTEGER,
|
|
usbPortRate
|
|
INTEGER
|
|
}
|
|
|
|
usbPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the USB port hardware. By
|
|
convention and if possible, hardware port numbers map
|
|
directly to external connectors."
|
|
::= { usbPortEntry 1 }
|
|
|
|
|
|
|
|
|
|
usbPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
host(1),
|
|
device(2),
|
|
hub(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the USB port"
|
|
::= { usbPortEntry 2 }
|
|
|
|
usbPortRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low-speed (1),
|
|
full-speed(2),
|
|
high-speed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The USB port rate that could be low-speed(1) for 1.5
|
|
Mbps, full-speed(2) for 12Mbps or high-speed(3) for
|
|
USB 2.0"
|
|
::= { usbPortEntry 3 }
|
|
|
|
--
|
|
-- usb Device MIB
|
|
--
|
|
usbDeviceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsbDeviceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of USB device ports. Usually the device has
|
|
only one USB device port"
|
|
::= { usbMibObjects 3 }
|
|
|
|
usbDeviceEntry OBJECT-TYPE
|
|
SYNTAX UsbDeviceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status and parameter values for the USB device port."
|
|
INDEX { usbDeviceIndex }
|
|
::= { usbDeviceTable 1 }
|
|
|
|
UsbDeviceEntry ::=
|
|
SEQUENCE {
|
|
usbDeviceIndex
|
|
Integer32,
|
|
usbDevicePower
|
|
INTEGER,
|
|
usbDeviceVendorID
|
|
OCTET STRING,
|
|
usbDeviceProductID
|
|
OCTET STRING,
|
|
usbDeviceNumberConfigurations
|
|
Integer32,
|
|
usbDeviceActiveClass
|
|
INTEGER,
|
|
usbDeviceStatus
|
|
INTEGER,
|
|
usbDeviceEnumCounter
|
|
Counter32,
|
|
usbDeviceRemoteWakeup
|
|
TruthValue,
|
|
usbDeviceRemoteWakeupOn
|
|
TruthValue
|
|
}
|
|
|
|
usbDeviceIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index is identical to usbPortIndex for the
|
|
correspondent USB port"
|
|
::= { usbDeviceEntry 1 }
|
|
|
|
usbDevicePower OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
self-powered(2),
|
|
bus-powered(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the way USB device port is powered"
|
|
::= { usbDeviceEntry 2 }
|
|
|
|
usbDeviceVendorID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The USB device port vendor HEX-formatted string as it
|
|
is provided to the USB host by the USB device"
|
|
::= { usbDeviceEntry 3 }
|
|
|
|
usbDeviceProductID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The product ID HEX-formatted string as it is provided
|
|
to the USB host by the USB device"
|
|
::= { usbDeviceEntry 4 }
|
|
|
|
usbDeviceNumberConfigurations OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of configurations the USB port
|
|
supports. Device port should support at least one
|
|
configuration"
|
|
::= { usbDeviceEntry 5 }
|
|
|
|
usbDeviceActiveClass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
cdc(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object returns USB Device Class type of the
|
|
active configuration"
|
|
::= { usbDeviceEntry 6 }
|
|
|
|
|
|
usbDeviceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unattached(1),
|
|
attached(2),
|
|
powered(3),
|
|
default(4),
|
|
address(5),
|
|
configured(6),
|
|
suspended(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current status of the USB device state machine"
|
|
::= { usbDeviceEntry 7 }
|
|
|
|
usbDeviceEnumCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number reconnections (enumerations) since device
|
|
is operational"
|
|
::= { usbDeviceEntry 8 }
|
|
|
|
|
|
|
|
usbDeviceRemoteWakeup OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), the device supports Remote Wakeup
|
|
function. If set to false(2), the device doesn't
|
|
support it"
|
|
::= { usbDeviceEntry 9 }
|
|
|
|
usbDeviceRemoteWakeupOn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), the remote wakeup function is
|
|
activated by the host. If set to false(2), remote
|
|
wakeup function is not active."
|
|
::= { usbDeviceEntry 10 }
|
|
|
|
--
|
|
-- Table of the CDC interfaces
|
|
--
|
|
usbCDCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsbCDCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Communication Device Class (CDC) interfaces
|
|
supported by the USB device. It could be more then one
|
|
CDC interface for the device that expose more then one
|
|
interface to the network"
|
|
::= { usbMibObjects 4 }
|
|
|
|
usbCDCEntry OBJECT-TYPE
|
|
SYNTAX UsbCDCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status and parameter values for CDC device"
|
|
INDEX { usbCDCIndex, usbCDCIfIndex }
|
|
::= { usbCDCTable 1 }
|
|
|
|
UsbCDCEntry ::=
|
|
SEQUENCE {
|
|
usbCDCIndex
|
|
Integer32,
|
|
usbCDCIfIndex
|
|
InterfaceIndexOrZero,
|
|
usbCDCSubclass
|
|
INTEGER,
|
|
usbCDCVersion
|
|
OCTET STRING,
|
|
usbCDCDataTransferType
|
|
INTEGER,
|
|
usbCDCDataEndpoints
|
|
Integer32,
|
|
usbCDCStalls
|
|
Counter32
|
|
}
|
|
|
|
usbCDCIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index is identical to usbPortIndex for the
|
|
correspondent USB port"
|
|
::= { usbCDCEntry 1 }
|
|
|
|
usbCDCIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable uniquely identifies the interface index
|
|
which this CDC device is representing"
|
|
::= { usbCDCEntry 2 }
|
|
|
|
usbCDCSubclass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
directLine(1),
|
|
acm(2),
|
|
telephony(3),
|
|
multichannel(4),
|
|
capi(5),
|
|
ethernet(6),
|
|
atm(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subclass used in data transfer in Communication Device
|
|
Class"
|
|
REFERENCE
|
|
"USB Class definitions for Communication Devices ver
|
|
1.1, p.28 "
|
|
::= { usbCDCEntry 3 }
|
|
|
|
usbCDCVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"String that describes the version of Communication
|
|
Device Class in HEX format (Major, Minor) "
|
|
::= { usbCDCEntry 4 }
|
|
|
|
usbCDCDataTransferType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
synchronous(1),
|
|
asynchronous(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of data transfer for Data Class Interface used by
|
|
the Communication Device. Isochronious mode is used
|
|
for synchronous(1) and bulk transfer mode is used for
|
|
asynchronous(2)"
|
|
::= { usbCDCEntry 5 }
|
|
|
|
|
|
|
|
usbCDCDataEndpoints OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of the data endpoints (IN and OUT) used by the
|
|
Communication Device. If the networking device is in
|
|
default interface setting, there are are no data
|
|
endpoints and no traffic is exchanged. Under the
|
|
normal operation there should be 2 Data Endpoints
|
|
(one IN and one OUT) for the networking device.
|
|
For the multichannel model this number could be
|
|
larger then 2"
|
|
::= { usbCDCEntry 6 }
|
|
|
|
usbCDCStalls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of times USB Data interface recovered
|
|
from stall since re-initialization and while the port
|
|
state was 'up' or 'test'."
|
|
::= { usbCDCEntry 7 }
|
|
|
|
--
|
|
-- Table of the CDC Ethernet-type interface or interface that uses
|
|
-- Remote NDIS over Abstract Control Model
|
|
--
|
|
|
|
usbCDCEtherTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsbCDCEtherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Communication Device Class (CDC) USB devices
|
|
that support Ethernet Networking Control Model."
|
|
::= { usbMibObjects 5 }
|
|
|
|
usbCDCEtherEntry OBJECT-TYPE
|
|
SYNTAX UsbCDCEtherEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status and parameter values for CDC devices that
|
|
support Ethernet Networking Control Model"
|
|
INDEX { usbCDCEtherIndex, usbCDCEtherIfIndex }
|
|
::= { usbCDCEtherTable 1 }
|
|
|
|
|
|
UsbCDCEtherEntry ::=
|
|
SEQUENCE {
|
|
usbCDCEtherIndex
|
|
Integer32,
|
|
usbCDCEtherIfIndex
|
|
InterfaceIndexOrZero,
|
|
usbCDCEtherMacAddress
|
|
MacAddress,
|
|
usbCDCEtherPacketFilter
|
|
BITS,
|
|
usbCDCEtherDataStatisticsCapabilities
|
|
BITS,
|
|
usbCDCEtherDataCheckErrs
|
|
Counter32
|
|
}
|
|
|
|
usbCDCEtherIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index is identical to usbPortIndex for the
|
|
correspondent USB port"
|
|
::= { usbCDCEtherEntry 1 }
|
|
|
|
usbCDCEtherIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable uniquely identifies the interface index
|
|
to which this CDC device is connected "
|
|
::= { usbCDCEtherEntry 2 }
|
|
|
|
usbCDCEtherMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 48bit MAC address that is provided by USB CDC
|
|
device to the host. This address will be used as the
|
|
source address of Ethernet frames sent by the host
|
|
over the particular CDC interface."
|
|
::= { usbCDCEtherEntry 3}
|
|
|
|
usbCDCEtherPacketFilter OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
packetPromiscuous(0),
|
|
packetAllMulticast(1),
|
|
packetDirected(2),
|
|
packetBroadcast(3),
|
|
packetMulticast(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap indicates the host requirements to the USB
|
|
device to perform Ethernet packet filtering of the
|
|
particular type frames directed to the host"
|
|
REFERENCE
|
|
"USB Class definitions for Communication Devices ver
|
|
1.1, p.66 Table 62"
|
|
::= { usbCDCEtherEntry 4 }
|
|
|
|
usbCDCEtherDataStatisticsCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
frameXmitOk(0),
|
|
frameRcvOk(1),
|
|
frameXmitErr(2),
|
|
frameRcvErr(3),
|
|
frameRcvNoBuff(4),
|
|
bytesXmitDirectOk(5),
|
|
framesXmitDirectOk(6),
|
|
bytesXmitMulticastOk(7),
|
|
framesXmitMulticastOk(8),
|
|
bytesXmitBroadcastOk(9),
|
|
framesXmitBroadcastOk(10),
|
|
bytesRcvDirectOk(11),
|
|
framesRcvDirectOk(12),
|
|
bytesRcvMulticastOk(13),
|
|
framesRcvMulticastOk(14),
|
|
bytesRcvBroadcastOk(15),
|
|
framesRcvBroadcastOk(16),
|
|
framesRcvCrcErr(17),
|
|
xmitQueueLen(18),
|
|
rcvErrAlignment(19),
|
|
xmitOneCollision(20),
|
|
xmitMoreCollisions(21),
|
|
xmitDeferred(22),
|
|
xmitMaxCollision(23),
|
|
rcvOverrun(24),
|
|
xmitUnderrun(25),
|
|
xmitHearbeatFailure(26),
|
|
xmitTimesCrsLost(27),
|
|
xmitLateCollisions(28)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap indicates the ability to collect Ethernet
|
|
statistics of different types as it provided in
|
|
Ethernet Networking Functional Descriptor. If the
|
|
Particular bit is set, the device could provide the
|
|
corresponding statistics counter to the host"
|
|
REFERENCE
|
|
"USB Class definitions for Communication Devices ver
|
|
1.1, p.46 Table 42"
|
|
::= { usbCDCEtherEntry 5 }
|
|
|
|
usbCDCEtherDataCheckErrs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of frames with an invalid frame check
|
|
sequence, input from the USB Data interface since
|
|
system re-initialization and while the port state was
|
|
'up' or 'test'."
|
|
::= { usbCDCEtherEntry 6 }
|
|
|
|
usbCDCEtherXmtAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsbCDCEtherXmtAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains an entry for each multicast
|
|
address for which the system will transmit
|
|
packets/frames on a particular USB interface."
|
|
::= { usbMibObjects 6 }
|
|
|
|
usbCDCEtherXmtAddressEntry OBJECT-TYPE
|
|
SYNTAX UsbCDCEtherXmtAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of objects identifying an address for which
|
|
the system will send packets/frames on the
|
|
particular USB interface identified by the index
|
|
values usbCDCIndex and ifIndex."
|
|
INDEX {usbCDCEtherIndex, usbCDCEtherIfIndex,
|
|
ifCDCEtherXmtAddress }
|
|
::= { usbCDCEtherXmtAddressTable 1 }
|
|
|
|
|
|
|
|
UsbCDCEtherXmtAddressEntry ::=
|
|
SEQUENCE {
|
|
ifCDCEtherXmtAddress MacAddress
|
|
}
|
|
|
|
ifCDCEtherXmtAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An address for which the system will will send
|
|
packets/frames on the particular USB interface.
|
|
The address only could be set by the host by using
|
|
the command for USB interface."
|
|
::= { usbCDCEtherXmtAddressEntry 1 }
|
|
--
|
|
-- notification group is for future extension.
|
|
--
|
|
usbMibNotification OBJECT IDENTIFIER ::= { usbMib 2 }
|
|
usbMibConformance OBJECT IDENTIFIER ::= { usbMib 3 }
|
|
usbMibCompliances OBJECT IDENTIFIER ::= { usbMibConformance 1 }
|
|
usbMibGroups OBJECT IDENTIFIER ::= { usbMibConformance 2 }
|
|
|
|
-- compliance statements
|
|
usbMibBasicCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that implement
|
|
USB MIB"
|
|
|
|
MODULE -- usbMib
|
|
|
|
-- unconditionally mandatory groups
|
|
MANDATORY-GROUPS {
|
|
usbMibBasicGroup
|
|
}
|
|
|
|
-- unconditionally mandatory group
|
|
GROUP usbMibBasicGroup
|
|
DESCRIPTION
|
|
"Group of objects that are mandatory to support by
|
|
device implementing this MIB"
|
|
|
|
-- conditionally mandatory group
|
|
GROUP usbMibCDCGroup
|
|
DESCRIPTION
|
|
"This group is implemented only in devices having at
|
|
least one CDC interface"
|
|
|
|
-- conditionally mandatory group
|
|
GROUP usbMibCDCEtherGroup
|
|
DESCRIPTION
|
|
"This group is implemented only in devices having at
|
|
least one CDC interface that uses Ethernet Networking
|
|
Control Model or remote NDIS"
|
|
|
|
-- conditionally mandatory group
|
|
GROUP usbCDCEtherXmtAddressGroup
|
|
DESCRIPTION
|
|
"This group is implemented only for USB CDC interfaces
|
|
that have transmit multicast filtering capabilities."
|
|
|
|
::= {usbMibCompliances 1}
|
|
|
|
usbMibBasicGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
usbNumber,
|
|
usbPortIndex,
|
|
usbPortType,
|
|
usbPortRate,
|
|
usbDeviceIndex,
|
|
usbDevicePower,
|
|
usbDeviceVendorID,
|
|
usbDeviceProductID,
|
|
usbDeviceNumberConfigurations,
|
|
usbDeviceActiveClass,
|
|
usbDeviceStatus,
|
|
usbDeviceEnumCounter,
|
|
usbDeviceRemoteWakeup,
|
|
usbDeviceRemoteWakeupOn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group of objects that are mandatory to support by
|
|
device implementing this MIB"
|
|
::= { usbMibGroups 1 }
|
|
|
|
usbMibCDCGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
usbCDCIndex,
|
|
usbCDCIfIndex,
|
|
usbCDCSubclass,
|
|
usbCDCVersion,
|
|
usbCDCDataTransferType,
|
|
usbCDCDataEndpoints,
|
|
usbCDCStalls
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is implemented only in devices having at
|
|
least one CDC interface"
|
|
::= { usbMibGroups 2 }
|
|
|
|
|
|
|
|
|
|
usbMibCDCEtherGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
usbCDCEtherIndex,
|
|
usbCDCEtherIfIndex,
|
|
usbCDCEtherMacAddress,
|
|
usbCDCEtherPacketFilter,
|
|
usbCDCEtherDataStatisticsCapabilities,
|
|
usbCDCEtherDataCheckErrs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is implemented only in devices having at
|
|
least one CDC interface that uses Ethernet Networking
|
|
Control Model or remote NDIS"
|
|
::= { usbMibGroups 3 }
|
|
|
|
usbCDCEtherXmtAddressGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ifCDCEtherXmtAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is implemented only for USB CDC interfaces
|
|
that have transmit multicast filtering capabilities."
|
|
::= { usbMibGroups 4 }
|
|
END
|
|
|
|
--
|
|
-- "Copyright (C) The Internet Society (2000). All Rights Reserved.
|
|
--
|
|
-- This document and translations of it may be copied and furnished to
|
|
-- others, and derivative works that comment on or otherwise explain it
|
|
-- or assist in its implementation may be prepared, copied, published
|
|
-- and distributed, in whole or in part, without restriction of any
|
|
-- kind, provided that the above copyright notice and this paragraph
|
|
-- are included on all such copies and derivative works. However, this
|
|
-- document itself may not be modified in any way, such as by removing
|
|
-- the copyright notice or references to the Internet Society or other
|
|
-- Internet organizations, except as needed for the purpose of
|
|
-- developing Internet standards in which case the procedures for
|
|
-- copyrights defined in the Internet Standards process must be
|
|
-- followed, or as required to translate it into languages other then
|
|
-- English.
|
|
--
|
|
-- The limited permissions granted above are perpetual and will not be
|
|
-- revoked by the Internet Society or its successors or assigns.
|
|
--
|
|
-- This document and the information contained herein is provided on an
|
|
-- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
|
|
-- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
|
|
-- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
|
|
-- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
|
|
-- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
-- B. Dolnik Experimental 20
|
|
|