1746 lines
59 KiB
Plaintext
1746 lines
59 KiB
Plaintext
TE-LINK-STD-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, transmission, Integer32, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION, RowStatus, StorageType
|
|
FROM SNMPv2-TC
|
|
|
|
InterfaceIndexOrZero, ifIndex
|
|
FROM IF-MIB
|
|
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB;
|
|
|
|
teLinkStdMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200510110000Z" -- 11 October 2005
|
|
ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
|
|
CONTACT-INFO
|
|
" Martin Dubuc
|
|
Email: mdubuc@ncf.ca
|
|
|
|
Thomas D. Nadeau
|
|
Email: tnadeau@cisco.com
|
|
|
|
Jonathan P. Lang
|
|
Email: jplang@ieee.org
|
|
|
|
Comments about this document should be emailed directly to
|
|
the MPLS working group mailing list at mpls@uu.net."
|
|
DESCRIPTION
|
|
"Copyright (C) 2005 The Internet Society. This version of
|
|
this MIB module is part of RFC 4220; see the RFC
|
|
itself for full legal notices.
|
|
|
|
This MIB module contains managed object definitions for
|
|
MPLS traffic engineering links as defined in
|
|
'Link Bundling in MPLS Traffic Engineering (TE)'."
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"200510110000Z" -- 11 October 2005
|
|
DESCRIPTION
|
|
"Initial version published as RFC 4220."
|
|
::= { transmission 200 }
|
|
|
|
-- Textual Conventions
|
|
|
|
TeLinkBandwidth ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type is used to represent link bandwidth in bps. This
|
|
value is represented using a 4 octet IEEE floating point
|
|
format [IEEE]. The floating point representation is not
|
|
used to represent fractional value but rather to allow
|
|
specification of large numbers that cannot be expressed
|
|
with 32-bit integers."
|
|
REFERENCE
|
|
"IEEE Standard for Binary Floating-Point Arithmetic,
|
|
Standard 754-1985"
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
|
|
TeLinkPriority ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type is used to represent a priority. Each connection
|
|
is assigned a priority. This priority is used when
|
|
accounting for bandwidth on TE links or component
|
|
links, for resource allocation and for rerouting purposes.
|
|
Value 0 is the highest priority. Value 7 is the lowest
|
|
priority."
|
|
SYNTAX Unsigned32 (0..7)
|
|
|
|
TeLinkProtection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link protection."
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
|
|
TeLinkSwitchingCapability ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switching capability as specified in the 'OSPF Extensions in
|
|
Support of Generalized Multi-Protocol Label Switching
|
|
(GMPLS)' document. The values specified in this document
|
|
are not contiguous."
|
|
SYNTAX INTEGER {
|
|
packetSwitch1(1),
|
|
packetSwitch2(2),
|
|
packetSwitch3(3),
|
|
packetSwitch4(4),
|
|
layer2Switch(51),
|
|
tdm(100),
|
|
lambdaSwitch(150),
|
|
fiberSwitch(200)
|
|
}
|
|
|
|
TeLinkEncodingType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link encoding type as specified in 'Generalized
|
|
Multi-Protocol Label Switching (GMPLS) Signaling
|
|
Functional Description' document. The values
|
|
specified in this document are not contiguous."
|
|
SYNTAX INTEGER {
|
|
packet(1),
|
|
ethernet(2),
|
|
ansiEtsiPdh(3),
|
|
sdhItuSonetAnsi(5),
|
|
digitalWrapper(7),
|
|
lambda(8),
|
|
fiber(9),
|
|
fiberChannel(11)
|
|
}
|
|
|
|
TeLinkSonetSdhIndication ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This convention is used to indicate whether the interface
|
|
supports Standard or Arbitrary SONET/SDH. To simplify the
|
|
mapping process, the values used in this textual convention
|
|
match the values specified in the interface switching
|
|
capability specific information field, i.e., 0 for Standard
|
|
SONET/SDH and 1 for Arbitrary SONET/SDH."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
SYNTAX INTEGER {
|
|
standard(0),
|
|
arbitrary(1)
|
|
}
|
|
|
|
-- Top level components of this MIB module
|
|
|
|
-- Notifications
|
|
teLinkNotifications OBJECT IDENTIFIER ::= { teLinkStdMIB 0 }
|
|
-- Tables, Scalars
|
|
teLinkObjects OBJECT IDENTIFIER ::= { teLinkStdMIB 1 }
|
|
-- Conformance
|
|
teLinkConformance OBJECT IDENTIFIER ::= { teLinkStdMIB 2 }
|
|
|
|
-- TE Link Table
|
|
|
|
teLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TeLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the grouping of component links into
|
|
TE links and the grouping of TE links into bundled links."
|
|
::= { teLinkObjects 1 }
|
|
|
|
teLinkEntry OBJECT-TYPE
|
|
SYNTAX TeLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table exists for each ifEntry with an
|
|
ifType of teLink(200), i.e., for every TE link. An ifEntry
|
|
in the ifTable must exist before a teLinkEntry is created
|
|
with the corresponding ifIndex. If a TE link entry in the
|
|
ifTable is destroyed, then so is the corresponding entry
|
|
in the teLinkTable. The administrative and operational
|
|
status values are controlled from the ifEntry."
|
|
INDEX { ifIndex }
|
|
::= { teLinkTable 1 }
|
|
|
|
TeLinkEntry ::= SEQUENCE {
|
|
teLinkAddressType InetAddressType,
|
|
teLinkLocalIpAddr InetAddress,
|
|
teLinkRemoteIpAddr InetAddress,
|
|
teLinkMetric Unsigned32,
|
|
teLinkMaximumReservableBandwidth TeLinkBandwidth,
|
|
teLinkProtectionType INTEGER,
|
|
teLinkWorkingPriority TeLinkPriority,
|
|
teLinkResourceClass Unsigned32,
|
|
teLinkIncomingIfId Integer32,
|
|
teLinkOutgoingIfId InterfaceIndexOrZero,
|
|
teLinkRowStatus RowStatus,
|
|
teLinkStorageType StorageType
|
|
}
|
|
|
|
teLinkAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Internet address for the TE link."
|
|
::= { teLinkEntry 1 }
|
|
|
|
teLinkLocalIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local Internet address for numbered links. The type of
|
|
this address is determined by the value of the
|
|
teLinkAddressType object.
|
|
|
|
For IPv4 and IPv6 numbered links, this object represents the
|
|
local IP address associated with the TE link. For an
|
|
unnumbered link, the local address is of type unknown, this
|
|
object is set to the zero length string, and the
|
|
teLinkOutgoingIfId object then identifies the unnumbered
|
|
address.
|
|
|
|
If the TE link is a Forwarding Adjacency (FA), the local
|
|
IP address is set to the head-end address of the FA-LSP.
|
|
|
|
If ipAddrTable is implemented, this object must have the
|
|
same value as the ipAdEntAddr object that belongs to the
|
|
row in ipAddrTable where ipAdEntIfIndex is equal to
|
|
|
|
ifIndex."
|
|
::= { teLinkEntry 2 }
|
|
|
|
teLinkRemoteIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote Internet address for numbered links. The type of
|
|
this address is determined by the value of the
|
|
teLinkAddressType object.
|
|
|
|
The remote IP address associated with the TE link (IPv4 and
|
|
IPv6 numbered links). For an unnumbered link, the remote
|
|
address is of type unknown, this object is set to the
|
|
zero length string, and the teLinkIncomingIfId object then
|
|
identifies the unnumbered address.
|
|
|
|
If the TE link is a Forwarding Adjacency, the remote IP
|
|
address is set to the tail-end address of the FA-LSP."
|
|
::= { teLinkEntry 3 }
|
|
|
|
teLinkMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The traffic engineering metric for the TE link is
|
|
derived from its component links. All component links
|
|
within the TE link must have the same traffic
|
|
engineering metric."
|
|
REFERENCE
|
|
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
|
|
::= { teLinkEntry 4 }
|
|
|
|
teLinkMaximumReservableBandwidth OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum reservable bandwidth on
|
|
the TE link. This is the union of the maximum reservable
|
|
bandwidth of all the component links within the
|
|
TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkEntry 5 }
|
|
|
|
teLinkProtectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
extraTraffic(1),
|
|
unprotected(2),
|
|
shared(3),
|
|
dedicated1For1(4),
|
|
dedicated1Plus1(5),
|
|
enhanced(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the link protection type of the
|
|
TE link. Descriptions of the different protection types can
|
|
be found in the 'Routing Extensions in Support of
|
|
Generalized Multi-Protocol Label Switching (GMPLS)'
|
|
document."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203 and
|
|
Routing Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4202"
|
|
::= { teLinkEntry 6 }
|
|
|
|
teLinkWorkingPriority OBJECT-TYPE
|
|
SYNTAX TeLinkPriority
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents a priority value such that a new
|
|
connection with a higher priority, i.e., numerically lower
|
|
than this value, is guaranteed to be setup on a primary
|
|
link and not on a secondary link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkEntry 7 }
|
|
|
|
teLinkResourceClass OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the TE link resource class.
|
|
The resource class is a 32 bit bitfield. The resource class
|
|
for a link bundle is derived from the resource class of its
|
|
|
|
TE links. All TE links within a link bundle must have the
|
|
same resource class. Encoding of the resource class is
|
|
described in the 'Traffic Engineering (TE) Extensions to
|
|
OSPF Version 2' document."
|
|
REFERENCE
|
|
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201
|
|
and Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630"
|
|
::= { teLinkEntry 8 }
|
|
|
|
teLinkIncomingIfId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For unnumbered links, the incoming interface is set to the
|
|
outgoing interface identifier chosen by the neighboring LSR
|
|
for the reverse link corresponding to this TE link. If the
|
|
link is numbered, the value of this object is 0 and the
|
|
address is stored in the teLinkRemoteIpAddr instead."
|
|
REFERENCE
|
|
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
|
|
::= { teLinkEntry 9 }
|
|
|
|
teLinkOutgoingIfId OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the link is unnumbered, the outgoing interface identifier
|
|
is set to the outgoing interface identifier chosen for the
|
|
TE link by the advertising LSR. If the link is numbered, the
|
|
value of this object is 0 and the address is stored in the
|
|
teLinkLocalIpAddr instead."
|
|
REFERENCE
|
|
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
|
|
::= { teLinkEntry 10 }
|
|
|
|
teLinkRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. None of the writable objects in
|
|
a row can be changed if status is active(1)."
|
|
::= { teLinkEntry 11 }
|
|
|
|
teLinkStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row in the
|
|
teLinkTable. Conceptual rows having the value
|
|
'permanent' need not allow write-access to any
|
|
columnar object in the row."
|
|
::= { teLinkEntry 12 }
|
|
|
|
-- End of teLinkTable
|
|
|
|
-- TE Link Descriptor Table
|
|
|
|
teLinkDescriptorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TeLinkDescriptorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the interface switching capability
|
|
descriptors associated with the TE links."
|
|
::= { teLinkObjects 2 }
|
|
|
|
teLinkDescriptorEntry OBJECT-TYPE
|
|
SYNTAX TeLinkDescriptorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created for every TE link interface
|
|
switching capability descriptor. An ifEntry in the ifTable
|
|
must exist before a teLinkDescriptorEntry using the same
|
|
ifIndex is created. ifType of ifEntry must be teLink(200).
|
|
If a TE link entry in the ifTable is destroyed, then so are
|
|
all of the entries in the teLinkDescriptorTable that use the
|
|
ifIndex of this TE link."
|
|
INDEX { ifIndex, teLinkDescriptorId }
|
|
::= { teLinkDescriptorTable 1 }
|
|
|
|
TeLinkDescriptorEntry ::= SEQUENCE {
|
|
teLinkDescriptorId Unsigned32,
|
|
teLinkDescrSwitchingCapability TeLinkSwitchingCapability,
|
|
teLinkDescrEncodingType TeLinkEncodingType,
|
|
teLinkDescrMinLspBandwidth TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio0 TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio1 TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio2 TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio3 TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio4 TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio5 TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio6 TeLinkBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio7 TeLinkBandwidth,
|
|
teLinkDescrInterfaceMtu Unsigned32,
|
|
teLinkDescrIndication TeLinkSonetSdhIndication,
|
|
teLinkDescrRowStatus RowStatus,
|
|
teLinkDescrStorageType StorageType
|
|
}
|
|
|
|
teLinkDescriptorId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the link descriptor identifier."
|
|
::= { teLinkDescriptorEntry 1 }
|
|
|
|
teLinkDescrSwitchingCapability OBJECT-TYPE
|
|
SYNTAX TeLinkSwitchingCapability
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies interface switching capability of
|
|
the TE link, which is derived from its component links."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 2 }
|
|
|
|
teLinkDescrEncodingType OBJECT-TYPE
|
|
SYNTAX TeLinkEncodingType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the TE link encoding type."
|
|
REFERENCE
|
|
"Generalized Multi-Protocol Label Switching (GMPLS)
|
|
Signaling Functional Description, RFC 3471"
|
|
::= { teLinkDescriptorEntry 3 }
|
|
|
|
teLinkDescrMinLspBandwidth OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the minimum LSP bandwidth on
|
|
the TE link. This is derived from the union of the
|
|
minimum LSP bandwidth of all the component links
|
|
associated with the TE link that can be used to carry
|
|
live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 4 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio0 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 0 on the TE link. This is the union of the maximum
|
|
LSP bandwidth at priority 0 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 5 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio1 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 1 on the TE link. This is the union of the maximum
|
|
LSP bandwidth at priority 1 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 6 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio2 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 2 on the TE link. This is the union of the maximum
|
|
|
|
LSP bandwidth at priority 2 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 7 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio3 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 3 on the TE link. This is the union of the maximum
|
|
LSP bandwidth at priority 3 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 8 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio4 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 4 on the TE link. This is the union of the maximum
|
|
LSP bandwidth at priority 4 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 9 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio5 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 5 on the TE link. This is the union of the maximum
|
|
LSP bandwidth at priority 5 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 10 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio6 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 6 on the TE link. This is the union of the maximum
|
|
LSP bandwidth at priority 6 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 11 }
|
|
|
|
teLinkDescrMaxLspBandwidthPrio7 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 7 on the TE link. This is the union of the maximum
|
|
LSP bandwidth at priority 7 of all the component links within
|
|
the TE link that can be used to carry live traffic."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 12 }
|
|
|
|
teLinkDescrInterfaceMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the interface MTU for the TE
|
|
link descriptor."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 13 }
|
|
|
|
teLinkDescrIndication OBJECT-TYPE
|
|
SYNTAX TeLinkSonetSdhIndication
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies whether this interface supports
|
|
Standard or Arbitrary SONET/SDH."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkDescriptorEntry 14 }
|
|
|
|
teLinkDescrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. No read-create object
|
|
can be changed if teLinkDescrRowStatus is in the active(1)
|
|
state."
|
|
::= { teLinkDescriptorEntry 15 }
|
|
|
|
teLinkDescrStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row in the
|
|
teLinkDescriptorTable. Conceptual rows having the value
|
|
'permanent' need not allow write-access to any
|
|
columnar object in the row."
|
|
::= { teLinkDescriptorEntry 16 }
|
|
|
|
-- End of teLinkDescriptorTable
|
|
|
|
-- TE Link Shared Risk Link Group Table
|
|
|
|
teLinkSrlgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TeLinkSrlgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the SRLGs associated with TE links."
|
|
::= { teLinkObjects 3 }
|
|
|
|
teLinkSrlgEntry OBJECT-TYPE
|
|
SYNTAX TeLinkSrlgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table contains information about an
|
|
SRLG associated with a TE link.
|
|
An ifEntry in the ifTable must exist before a
|
|
teLinkSrlgEntry using the same ifIndex is created.
|
|
The ifType of ifEntry must be teLink(200).
|
|
If a TE link entry in the ifTable is destroyed, then so
|
|
are all of the entries in the teLinkSrlgTable that use the
|
|
ifIndex of this TE link."
|
|
INDEX { ifIndex, teLinkSrlg }
|
|
::= { teLinkSrlgTable 1 }
|
|
|
|
TeLinkSrlgEntry ::= SEQUENCE {
|
|
teLinkSrlg Unsigned32,
|
|
teLinkSrlgRowStatus RowStatus,
|
|
teLinkSrlgStorageType StorageType
|
|
}
|
|
|
|
teLinkSrlg OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This identifies an SRLG supported by the TE link. An SRLG is
|
|
identified with a 32-bit number that is unique within an IGP
|
|
domain. Zero is a valid SRLG number."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { teLinkSrlgEntry 1 }
|
|
|
|
teLinkSrlgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. No read-create object can
|
|
be modified if teLinkSrlgRowStatus is active(1)."
|
|
::= { teLinkSrlgEntry 2 }
|
|
|
|
teLinkSrlgStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row in the
|
|
|
|
teLinkSrlgTable. Conceptual rows having the value
|
|
'permanent' need not allow write-access to any
|
|
columnar object in the row."
|
|
::= { teLinkSrlgEntry 3 }
|
|
|
|
-- End of teLinkSrlgTable
|
|
|
|
-- TE Link Bandwidth Table
|
|
|
|
teLinkBandwidthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TeLinkBandwidthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the priority-based bandwidth table
|
|
for TE links."
|
|
::= { teLinkObjects 4 }
|
|
|
|
teLinkBandwidthEntry OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table contains information about
|
|
the priority-based bandwidth of TE links. An ifEntry in the
|
|
ifTable must exist before a teLinkBandwidthEntry using the
|
|
same ifIndex is created. The ifType of ifEntry must be
|
|
teLink(200). If a TE link entry in the ifTable is destroyed,
|
|
then so are all of the entries in the teLinkBandwidthTable
|
|
that use the ifIndex of this TE link."
|
|
INDEX { ifIndex, teLinkBandwidthPriority }
|
|
::= { teLinkBandwidthTable 1 }
|
|
|
|
TeLinkBandwidthEntry ::= SEQUENCE {
|
|
teLinkBandwidthPriority TeLinkPriority,
|
|
teLinkBandwidthUnreserved TeLinkBandwidth,
|
|
teLinkBandwidthRowStatus RowStatus,
|
|
teLinkBandwidthStorageType StorageType
|
|
}
|
|
|
|
teLinkBandwidthPriority OBJECT-TYPE
|
|
SYNTAX TeLinkPriority
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the priority. A value of 0 is valid
|
|
as specified in the 'Traffic Engineering (TE) Extensions to
|
|
|
|
OSPF Version 2' document."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203 and
|
|
Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630"
|
|
::= { teLinkBandwidthEntry 1 }
|
|
|
|
teLinkBandwidthUnreserved OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the TE link unreserved
|
|
bandwidth at priority p. It is the sum of the unreserved
|
|
bandwidths at priority p of all component links associated
|
|
with the TE link (excluding all links that are strictly
|
|
used as protecting links)."
|
|
REFERENCE
|
|
"Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
|
|
::= { teLinkBandwidthEntry 2 }
|
|
|
|
teLinkBandwidthRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. No read-create object
|
|
can be modified when teLinkBandwidthRowStatus is active(1)."
|
|
::= { teLinkBandwidthEntry 3 }
|
|
|
|
teLinkBandwidthStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row in the
|
|
teLinkBandwidthTable. Conceptual rows having the value
|
|
'permanent' need not allow write-access to any
|
|
columnar object in the row."
|
|
::= { teLinkBandwidthEntry 4 }
|
|
|
|
-- End of teLinkBandwidthTable
|
|
|
|
-- Component Link Table
|
|
|
|
componentLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ComponentLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the component link parameters."
|
|
::= { teLinkObjects 5 }
|
|
|
|
componentLinkEntry OBJECT-TYPE
|
|
SYNTAX ComponentLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table exists for each ifEntry that
|
|
represents a component link. An ifEntry must exist in
|
|
the ifTable before a componentLinkEntry is created with
|
|
the corresponding ifIndex. ifEntry's ifType can be
|
|
of any interface type that has been defined for TE Link
|
|
interworking. Examples include ATM, Frame Relay, Ethernet,
|
|
etc. If an entry representing a component link is destroyed
|
|
in the ifTable, then so is the corresponding entry in the
|
|
componentLinkTable. The administrative and operational
|
|
status values are controlled from the ifEntry."
|
|
INDEX { ifIndex }
|
|
::= { componentLinkTable 1 }
|
|
|
|
ComponentLinkEntry ::= SEQUENCE {
|
|
componentLinkMaxResBandwidth TeLinkBandwidth,
|
|
componentLinkPreferredProtection TeLinkProtection,
|
|
componentLinkCurrentProtection TeLinkProtection,
|
|
componentLinkRowStatus RowStatus,
|
|
componentLinkStorageType StorageType
|
|
}
|
|
|
|
componentLinkMaxResBandwidth OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum reservable bandwidth on
|
|
the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkEntry 1 }
|
|
|
|
componentLinkPreferredProtection OBJECT-TYPE
|
|
SYNTAX TeLinkProtection
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies whether this component link is
|
|
a primary or secondary entity."
|
|
::= { componentLinkEntry 2 }
|
|
|
|
componentLinkCurrentProtection OBJECT-TYPE
|
|
SYNTAX TeLinkProtection
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies whether this component link is
|
|
currently used as primary or secondary link."
|
|
::= { componentLinkEntry 3 }
|
|
|
|
componentLinkRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. No read-create object
|
|
can be modified when componentLinkRowStatus is active(1)."
|
|
::= { componentLinkEntry 4 }
|
|
|
|
componentLinkStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row in the
|
|
componentLinkTable. Conceptual rows having the value
|
|
'permanent' need not allow write-access to any
|
|
columnar object in the row."
|
|
::= { componentLinkEntry 5 }
|
|
|
|
-- End of componentLinkTable
|
|
|
|
-- Component Link Descriptor Table
|
|
|
|
componentLinkDescriptorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ComponentLinkDescriptorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the interface switching capability
|
|
descriptors associated with the component links."
|
|
::= { teLinkObjects 6 }
|
|
|
|
componentLinkDescriptorEntry OBJECT-TYPE
|
|
SYNTAX ComponentLinkDescriptorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created for every component link
|
|
descriptor. An ifEntry in the ifTable must exist before a
|
|
componentLinkDescriptorEntry using the same ifIndex is
|
|
created. ifEntry's ifType can be of any interface type that
|
|
has been defined for TE Link interworking. Examples include
|
|
ATM, Frame Relay, Ethernet, etc. If a component link entry
|
|
in the ifTable is destroyed, then so are all entries in the
|
|
componentLinkDescriptorTable that use the ifIndex of this
|
|
component link."
|
|
INDEX { ifIndex, componentLinkDescrId }
|
|
::= { componentLinkDescriptorTable 1 }
|
|
|
|
ComponentLinkDescriptorEntry ::= SEQUENCE {
|
|
componentLinkDescrId Unsigned32,
|
|
componentLinkDescrSwitchingCapability TeLinkSwitchingCapability,
|
|
componentLinkDescrEncodingType TeLinkEncodingType,
|
|
componentLinkDescrMinLspBandwidth TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio0 TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio1 TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio2 TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio3 TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio4 TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio5 TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio6 TeLinkBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio7 TeLinkBandwidth,
|
|
componentLinkDescrInterfaceMtu Unsigned32,
|
|
componentLinkDescrIndication TeLinkSonetSdhIndication,
|
|
componentLinkDescrRowStatus RowStatus,
|
|
componentLinkDescrStorageType StorageType
|
|
}
|
|
|
|
componentLinkDescrId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the link descriptor identifier."
|
|
::= { componentLinkDescriptorEntry 1 }
|
|
|
|
componentLinkDescrSwitchingCapability OBJECT-TYPE
|
|
SYNTAX TeLinkSwitchingCapability
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies link multiplexing capabilities of
|
|
the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 2 }
|
|
|
|
componentLinkDescrEncodingType OBJECT-TYPE
|
|
SYNTAX TeLinkEncodingType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the component link encoding type."
|
|
REFERENCE
|
|
"Generalized Multi-Protocol Label Switching (GMPLS) Signaling
|
|
Functional Description, RFC 3471"
|
|
::= { componentLinkDescriptorEntry 3 }
|
|
|
|
componentLinkDescrMinLspBandwidth OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the minimum LSP bandwidth on
|
|
the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 4 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio0 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 0 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 5 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio1 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 1 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 6 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio2 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 2 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 7 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio3 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 3 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 8 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio4 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 4 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 9 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio5 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "thousand bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 5 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 10 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio6 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 6 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 11 }
|
|
|
|
componentLinkDescrMaxLspBandwidthPrio7 OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the maximum LSP bandwidth at
|
|
priority 7 on the component link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 12 }
|
|
|
|
componentLinkDescrInterfaceMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the interface MTU for the component
|
|
link descriptor."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 13 }
|
|
|
|
componentLinkDescrIndication OBJECT-TYPE
|
|
SYNTAX TeLinkSonetSdhIndication
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies whether this interface supports
|
|
Standard or Arbitrary SONET/SDH."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkDescriptorEntry 14 }
|
|
|
|
componentLinkDescrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. No read-create object
|
|
can be modified when componentLinkDescrRowStatus
|
|
is active(1)."
|
|
::= { componentLinkDescriptorEntry 15 }
|
|
|
|
componentLinkDescrStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row in the
|
|
componentLinkDescriptorTable. Conceptual rows
|
|
having the value 'permanent' need not allow write-access
|
|
to any columnar object in the row."
|
|
::= { componentLinkDescriptorEntry 16 }
|
|
|
|
-- End of componentLinkDescriptorTable
|
|
|
|
-- Component Link Bandwidth Table
|
|
|
|
componentLinkBandwidthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ComponentLinkBandwidthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the priority-based bandwidth
|
|
for component links."
|
|
::= { teLinkObjects 7 }
|
|
|
|
componentLinkBandwidthEntry OBJECT-TYPE
|
|
SYNTAX ComponentLinkBandwidthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table contains information about
|
|
the priority-based bandwidth on component links.
|
|
An ifEntry in the ifTable must exist before a
|
|
componentLinkBandwidthEntry using the same ifIndex is
|
|
created. ifEntry's ifType can be of any interface type that
|
|
has been defined for TE Link interworking. Examples
|
|
include ATM, Frame Relay, Ethernet, etc. If a component link
|
|
entry in the ifTable is destroyed, then so are all entries
|
|
in the componentLinkBandwidthTable that use the ifIndex of
|
|
this component link."
|
|
INDEX { ifIndex, componentLinkBandwidthPriority }
|
|
::= { componentLinkBandwidthTable 1 }
|
|
|
|
ComponentLinkBandwidthEntry ::= SEQUENCE {
|
|
componentLinkBandwidthPriority TeLinkPriority,
|
|
componentLinkBandwidthUnreserved TeLinkBandwidth,
|
|
componentLinkBandwidthRowStatus RowStatus,
|
|
componentLinkBandwidthStorageType StorageType
|
|
}
|
|
|
|
componentLinkBandwidthPriority OBJECT-TYPE
|
|
SYNTAX TeLinkPriority
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the priority. A value of 0 is valid
|
|
as specified in the 'Traffic Engineering (TE) Extensions to
|
|
OSPF Version 2' document."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203 and
|
|
Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630"
|
|
::= { componentLinkBandwidthEntry 1 }
|
|
|
|
componentLinkBandwidthUnreserved OBJECT-TYPE
|
|
SYNTAX TeLinkBandwidth
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies the component link unreserved
|
|
bandwidth at priority p."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of Generalized Multi-Protocol
|
|
Label Switching (GMPLS), RFC 4203"
|
|
::= { componentLinkBandwidthEntry 2 }
|
|
|
|
componentLinkBandwidthRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. No read-create object can
|
|
be modified when componentLinkBandwidthRowStatus is
|
|
active(1)."
|
|
::= { componentLinkBandwidthEntry 3 }
|
|
|
|
componentLinkBandwidthStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row in the
|
|
componentLinkBandwidthTable. Conceptual rows
|
|
having the value 'permanent' need not allow write-access
|
|
to any columnar object in the row."
|
|
::= { componentLinkBandwidthEntry 4 }
|
|
|
|
-- End of componentLinkBandwidthTable
|
|
|
|
-- Module compliance
|
|
|
|
teLinkCompliances
|
|
OBJECT IDENTIFIER ::= { teLinkConformance 1 }
|
|
|
|
teLinkGroups
|
|
OBJECT IDENTIFIER ::= { teLinkConformance 2 }
|
|
|
|
teLinkModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that support read-create
|
|
so that both configuration and monitoring of TE links can
|
|
be accomplished via this MIB module."
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS { teLinkGroup,
|
|
teLinkBandwidthGroup,
|
|
componentLinkBandwidthGroup }
|
|
|
|
GROUP teLinkSrlgGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for GMPLS enabled devices."
|
|
|
|
GROUP teLinkPscGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support the
|
|
packet switching capability."
|
|
|
|
GROUP teLinkTdmGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support the TDM
|
|
switching capability."
|
|
|
|
-- teLinkTable
|
|
|
|
OBJECT teLinkAddressType
|
|
SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) }
|
|
DESCRIPTION
|
|
"Only ipv4(1) and ipv6(2) address types need to be
|
|
supported for numbered links. For unnumbered links, the
|
|
unknown(0) address type needs to be supported."
|
|
|
|
OBJECT teLinkLocalIpAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"Size of TE link IP address depends on type of TE link.
|
|
TE link IP address size is zero if the link is unnumbered,
|
|
four if the link IP address is IPv4, and sixteen if the
|
|
link IP address is IPv6."
|
|
|
|
OBJECT teLinkRemoteIpAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
DESCRIPTION
|
|
"Size of TE link IP address depends on type of TE link.
|
|
TE link IP address size is zero if the link is unnumbered,
|
|
four if the link IP address is IPv4, and sixteen if the
|
|
link IP address is IPv6."
|
|
|
|
OBJECT teLinkRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for notReady(3) and createAndWait(5) is
|
|
not required."
|
|
|
|
-- teLinkDescriptorTable
|
|
|
|
OBJECT teLinkDescrRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for notReady(3) and createAndWait(5) is
|
|
not required."
|
|
|
|
-- teLinkSrlgTable
|
|
|
|
OBJECT teLinkSrlgRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for notReady(3) and createAndWait(5) is
|
|
not required."
|
|
|
|
-- teLinkBandwidthTable
|
|
|
|
OBJECT teLinkBandwidthRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for notReady(3) and createAndWait(5) is
|
|
not required."
|
|
|
|
-- componentLinkTable
|
|
|
|
OBJECT componentLinkRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for notReady(3) and createAndWait(5) is
|
|
not required."
|
|
|
|
-- componentLinkDescriptorTable
|
|
|
|
OBJECT componentLinkDescrRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for notReady(3) and createAndWait(5) is
|
|
not required."
|
|
|
|
-- componentLinkBandwidthTable
|
|
|
|
OBJECT componentLinkBandwidthRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for notReady(3) and createAndWait(5) is
|
|
not required."
|
|
::= { teLinkCompliances 1 }
|
|
|
|
teLinkModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents that support the
|
|
monitoring of the TE link MIB module."
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS { teLinkGroup,
|
|
teLinkBandwidthGroup,
|
|
componentLinkBandwidthGroup }
|
|
|
|
GROUP teLinkSrlgGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for GMPLS enabled devices."
|
|
|
|
GROUP teLinkPscGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support the
|
|
packet switching capability."
|
|
|
|
GROUP teLinkTdmGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices that support the TDM
|
|
switching capability."
|
|
|
|
-- teLinkTable
|
|
|
|
OBJECT teLinkAddressType
|
|
SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Only ipv4(1) and ipv6(2) address types need to be
|
|
supported for numbered links. For unnumbered links, the
|
|
unknown(0) address type needs to be supported."
|
|
|
|
OBJECT teLinkLocalIpAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Size of TE link IP address depends on type of TE link.
|
|
TE link IP address size is zero if the link is unnumbered,
|
|
four if the link IP address is IPv4, and sixteen if the
|
|
link IP address is IPv6."
|
|
|
|
OBJECT teLinkRemoteIpAddr
|
|
SYNTAX InetAddress (SIZE(0|4|16))
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Size of TE link IP address depends on type of TE link.
|
|
TE link IP address size is zero if the link is unnumbered,
|
|
four if the link IP address is IPv4, and sixteen if the
|
|
link IP address is IPv6."
|
|
|
|
OBJECT teLinkProtectionType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkWorkingPriority
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required and active(1) is the
|
|
only status that needs to be supported."
|
|
|
|
OBJECT teLinkStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- teLinkDescriptorTable
|
|
|
|
OBJECT teLinkDescrSwitchingCapability
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrEncodingType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMinLspBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio0
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio1
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio2
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio3
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio4
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio5
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio6
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrMaxLspBandwidthPrio7
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT teLinkDescrRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required and active(1) is the
|
|
only status that needs to be supported."
|
|
|
|
OBJECT teLinkDescrStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- teLinkSrlgTable
|
|
|
|
OBJECT teLinkSrlgRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required and active(1) is the
|
|
only status that needs to be supported."
|
|
|
|
OBJECT teLinkSrlgStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- teLinkBandwidthTable
|
|
|
|
OBJECT teLinkBandwidthRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required and active(1) is the
|
|
only status that needs to be supported."
|
|
|
|
OBJECT teLinkBandwidthStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- componentLinkTable
|
|
|
|
OBJECT componentLinkMaxResBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkPreferredProtection
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required and active(1) is the
|
|
only status that needs to be supported."
|
|
|
|
OBJECT componentLinkStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- componentLinkDescriptorTable
|
|
|
|
OBJECT componentLinkDescrSwitchingCapability
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrEncodingType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMinLspBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio0
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio1
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio2
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio3
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio4
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio5
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio6
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrMaxLspBandwidthPrio7
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrInterfaceMtu
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrIndication
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT componentLinkDescrRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required and active(1) is the
|
|
|
|
only status that needs to be supported."
|
|
|
|
OBJECT componentLinkDescrStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- componentLinkBandwidthTable
|
|
|
|
OBJECT componentLinkBandwidthRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required and active(1) is the
|
|
only status that needs to be supported."
|
|
|
|
OBJECT componentLinkBandwidthStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { teLinkCompliances 2 }
|
|
|
|
-- Units of conformance
|
|
|
|
teLinkGroup OBJECT-GROUP
|
|
OBJECTS { teLinkAddressType,
|
|
teLinkLocalIpAddr,
|
|
teLinkRemoteIpAddr,
|
|
teLinkMetric,
|
|
teLinkProtectionType,
|
|
teLinkWorkingPriority,
|
|
teLinkResourceClass,
|
|
teLinkIncomingIfId,
|
|
teLinkOutgoingIfId,
|
|
teLinkRowStatus,
|
|
teLinkStorageType,
|
|
teLinkDescrSwitchingCapability,
|
|
teLinkDescrEncodingType,
|
|
teLinkDescrRowStatus,
|
|
teLinkDescrStorageType,
|
|
componentLinkPreferredProtection,
|
|
componentLinkCurrentProtection,
|
|
componentLinkRowStatus,
|
|
componentLinkStorageType,
|
|
componentLinkDescrSwitchingCapability,
|
|
componentLinkDescrEncodingType,
|
|
componentLinkDescrRowStatus,
|
|
componentLinkDescrStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for the management of
|
|
resources associated with TE links."
|
|
::= { teLinkGroups 1 }
|
|
|
|
teLinkSrlgGroup OBJECT-GROUP
|
|
OBJECTS { teLinkSrlgRowStatus,
|
|
teLinkSrlgStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for the management of
|
|
SRLG resources associated with TE links."
|
|
::= { teLinkGroups 2 }
|
|
|
|
teLinkBandwidthGroup OBJECT-GROUP
|
|
OBJECTS { teLinkMaximumReservableBandwidth,
|
|
teLinkDescrMaxLspBandwidthPrio0,
|
|
teLinkDescrMaxLspBandwidthPrio1,
|
|
teLinkDescrMaxLspBandwidthPrio2,
|
|
teLinkDescrMaxLspBandwidthPrio3,
|
|
teLinkDescrMaxLspBandwidthPrio4,
|
|
teLinkDescrMaxLspBandwidthPrio5,
|
|
teLinkDescrMaxLspBandwidthPrio6,
|
|
teLinkDescrMaxLspBandwidthPrio7,
|
|
teLinkBandwidthUnreserved,
|
|
teLinkBandwidthRowStatus,
|
|
teLinkBandwidthStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for the management of
|
|
the bandwidth resources associated with TE links and
|
|
component links."
|
|
::= { teLinkGroups 3 }
|
|
|
|
componentLinkBandwidthGroup OBJECT-GROUP
|
|
OBJECTS { componentLinkMaxResBandwidth,
|
|
componentLinkDescrMaxLspBandwidthPrio0,
|
|
componentLinkDescrMaxLspBandwidthPrio1,
|
|
componentLinkDescrMaxLspBandwidthPrio2,
|
|
componentLinkDescrMaxLspBandwidthPrio3,
|
|
componentLinkDescrMaxLspBandwidthPrio4,
|
|
componentLinkDescrMaxLspBandwidthPrio5,
|
|
componentLinkDescrMaxLspBandwidthPrio6,
|
|
componentLinkDescrMaxLspBandwidthPrio7,
|
|
componentLinkBandwidthUnreserved,
|
|
componentLinkBandwidthRowStatus,
|
|
componentLinkBandwidthStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for the management of the
|
|
bandwidth parameters associated with component links."
|
|
::= { teLinkGroups 4 }
|
|
|
|
teLinkPscGroup OBJECT-GROUP
|
|
OBJECTS { teLinkDescrMinLspBandwidth,
|
|
teLinkDescrInterfaceMtu,
|
|
componentLinkDescrMinLspBandwidth,
|
|
componentLinkDescrInterfaceMtu
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for devices that are
|
|
packet switch capable."
|
|
::= { teLinkGroups 5 }
|
|
|
|
teLinkTdmGroup OBJECT-GROUP
|
|
OBJECTS { teLinkDescrMinLspBandwidth,
|
|
teLinkDescrIndication,
|
|
componentLinkDescrMinLspBandwidth,
|
|
componentLinkDescrIndication
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for devices that are
|
|
TDM switching capable."
|
|
::= { teLinkGroups 6 }
|
|
|
|
-- End of TE-LINK-STD-MIB
|
|
END
|