599 lines
20 KiB
Plaintext
599 lines
20 KiB
Plaintext
SYSLOG-MSG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, mib-2
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString, TruthValue
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
SyslogFacility, SyslogSeverity
|
|
|
|
FROM SYSLOG-TC-MIB;
|
|
|
|
syslogMsgMib MODULE-IDENTITY
|
|
LAST-UPDATED "200908130800Z"
|
|
ORGANIZATION "IETF OPSAWG Working Group"
|
|
CONTACT-INFO
|
|
"Juergen Schoenwaelder
|
|
<j.schoenwaelder@jacobs-university.de>
|
|
Jacobs University Bremen
|
|
Campus Ring 1
|
|
28757 Bremen
|
|
Germany
|
|
|
|
Alexander Clemm
|
|
<alex@cisco.com>
|
|
Cisco Systems
|
|
170 West Tasman Drive
|
|
San Jose, CA 95134-1706
|
|
USA
|
|
|
|
Anirban Karmakar
|
|
<akarmaka@cisco.com>
|
|
Cisco Systems India Pvt Ltd
|
|
SEZ Unit, Cessna Business Park,
|
|
Sarjapur Marathahalli ORR,
|
|
Bangalore, Karnataka 560103
|
|
India"
|
|
DESCRIPTION
|
|
"This MIB module represents SYSLOG messages as SNMP objects.
|
|
|
|
Copyright (c) 2009 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, is permitted pursuant to, and subject
|
|
to the license terms contained in, the Simplified BSD License
|
|
set forth in Section 4.c of the IETF Trust's Legal Provisions
|
|
Relating to IETF Documents
|
|
(http://trustee.ietf.org/license-info).
|
|
|
|
This version of this MIB module is part of RFC 5676; see
|
|
the RFC itself for full legal notices."
|
|
|
|
REVISION "200908130800Z"
|
|
DESCRIPTION
|
|
"Initial version issued as part of RFC 5676."
|
|
::= { mib-2 192 }
|
|
|
|
-- textual convention definitions
|
|
|
|
SyslogTimeStamp ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "2d-1d-1d,1d:1d:1d.3d,1a1d:1d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A date-time specification. This type is similar to the
|
|
DateAndTime type defined in the SNMPv2-TC, except the
|
|
subsecond granulation is microseconds instead of
|
|
deciseconds and a zero-length string can be used
|
|
to indicate a missing value.
|
|
|
|
field octets contents range
|
|
----- ------ -------- -----
|
|
1 1-2 year* 0..65536
|
|
2 3 month 1..12
|
|
3 4 day 1..31
|
|
4 5 hour 0..23
|
|
5 6 minutes 0..59
|
|
6 7 seconds 0..60
|
|
(use 60 for leap-second)
|
|
7 8-10 microseconds* 0..999999
|
|
8 11 direction from UTC '+' / '-'
|
|
9 12 hours from UTC* 0..13
|
|
10 13 minutes from UTC 0..59
|
|
|
|
* Notes:
|
|
- the value of year is in network-byte order
|
|
- the value of microseconds is in network-byte order
|
|
- daylight saving time in New Zealand is +13
|
|
|
|
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
|
|
displayed as:
|
|
|
|
1992-5-26,13:30:15.0,-4:0
|
|
|
|
Note that if only local time is known, then timezone
|
|
information (fields 11-13) is not present."
|
|
SYNTAX OCTET STRING (SIZE (0 | 10 | 13))
|
|
|
|
SyslogParamValueString ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "65535t"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of a SYSLOG SD-PARAM is represented using the
|
|
ISO/IEC IS 10646-1 character set, encoded as an octet string
|
|
using the UTF-8 transformation format described in RFC 3629.
|
|
|
|
Since additional code points are added by amendments to the
|
|
10646 standard from time to time, implementations must be
|
|
prepared to encounter any code point from 0x00000000 to
|
|
0x7fffffff. Byte sequences that do not correspond to the
|
|
valid UTF-8 encoding of a code point or that are outside this
|
|
range are prohibited. Similarly, overlong UTF-8 sequences
|
|
are prohibited.
|
|
|
|
UTF-8 may require multiple bytes to represent a single
|
|
character / code point; thus, the length of this object in
|
|
octets may be different from the number of characters
|
|
encoded. Similarly, size constraints refer to the number of
|
|
encoded octets, not the number of characters represented by
|
|
an encoding."
|
|
REFERENCE
|
|
"RFC 3629: UTF-8, a transformation format of ISO 10646"
|
|
SYNTAX OCTET STRING
|
|
|
|
-- object definitions
|
|
|
|
syslogMsgNotifications OBJECT IDENTIFIER ::= { syslogMsgMib 0 }
|
|
syslogMsgObjects OBJECT IDENTIFIER ::= { syslogMsgMib 1 }
|
|
syslogMsgConformance OBJECT IDENTIFIER ::= { syslogMsgMib 2 }
|
|
|
|
syslogMsgControl OBJECT IDENTIFIER ::= { syslogMsgObjects 1 }
|
|
|
|
syslogMsgTableMaxSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of SYSLOG messages that may be held in
|
|
syslogMsgTable. A particular setting does not guarantee that
|
|
there is sufficient memory available for the maximum number
|
|
of table entries indicated by this object. A value of 0 means
|
|
no fixed limit.
|
|
|
|
If an application reduces the limit while there are SYSLOG
|
|
messages in the syslogMsgTable, the SYSLOG messages that are
|
|
in the syslogMsgTable for the longest time MUST be discarded
|
|
to bring the table down to the new limit.
|
|
|
|
The value of this object should be kept in nonvolatile
|
|
memory."
|
|
DEFVAL { 0 }
|
|
::= { syslogMsgControl 1 }
|
|
|
|
syslogMsgEnableNotifications OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether syslogMsgNotification notifications are
|
|
generated.
|
|
|
|
The value of this object should be kept in nonvolatile
|
|
memory."
|
|
DEFVAL { false }
|
|
::= { syslogMsgControl 2 }
|
|
|
|
syslogMsgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SyslogMsgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing recent SYSLOG messages. The size of the
|
|
table is controlled by the syslogMsgTableMaxSize object."
|
|
::= { syslogMsgObjects 2 }
|
|
|
|
syslogMsgEntry OBJECT-TYPE
|
|
SYNTAX SyslogMsgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the syslogMsgTable."
|
|
INDEX { syslogMsgIndex }
|
|
::= { syslogMsgTable 1 }
|
|
|
|
SyslogMsgEntry ::= SEQUENCE {
|
|
syslogMsgIndex Unsigned32,
|
|
syslogMsgFacility SyslogFacility,
|
|
syslogMsgSeverity SyslogSeverity,
|
|
syslogMsgVersion Unsigned32,
|
|
syslogMsgTimeStamp SyslogTimeStamp,
|
|
syslogMsgHostName DisplayString,
|
|
syslogMsgAppName DisplayString,
|
|
syslogMsgProcID DisplayString,
|
|
syslogMsgMsgID DisplayString,
|
|
syslogMsgSDParams Unsigned32,
|
|
syslogMsgMsg OCTET STRING
|
|
}
|
|
|
|
syslogMsgIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A monotonically increasing number used to identify entries in
|
|
the syslogMsgTable. When syslogMsgIndex reaches the maximum
|
|
value (4294967295), the value wraps back to 1.
|
|
|
|
Applications periodically polling the syslogMsgTable for new
|
|
entries should take into account that a complete rollover of
|
|
syslogMsgIndex will happen if more than 4294967294 messages
|
|
are received during a poll interval."
|
|
::= { syslogMsgEntry 1 }
|
|
|
|
syslogMsgFacility OBJECT-TYPE
|
|
SYNTAX SyslogFacility
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The facility of the SYSLOG message."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.1)
|
|
RFC 5427: Textual Conventions for Syslog Management"
|
|
::= { syslogMsgEntry 2 }
|
|
|
|
syslogMsgSeverity OBJECT-TYPE
|
|
SYNTAX SyslogSeverity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity of the SYSLOG message"
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.1)
|
|
RFC 5427: Textual Conventions for Syslog Management"
|
|
::= { syslogMsgEntry 3 }
|
|
|
|
syslogMsgVersion OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..999)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the SYSLOG message. A value of 0 indicates
|
|
that the version is unknown."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.2)"
|
|
::= { syslogMsgEntry 4 }
|
|
|
|
syslogMsgTimeStamp OBJECT-TYPE
|
|
SYNTAX SyslogTimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timestamp of the SYSLOG message. A zero-length
|
|
string is returned if the timestamp is unknown."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.3)"
|
|
::= { syslogMsgEntry 5 }
|
|
|
|
syslogMsgHostName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hostname and the (optional) domain name of the SYSLOG
|
|
message. A zero-length string indicates an unknown hostname.
|
|
The SYSLOG protocol specification constrains this string to
|
|
printable US-ASCII code points."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.4)"
|
|
::= { syslogMsgEntry 6 }
|
|
|
|
syslogMsgAppName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..48))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The app-name of the SYSLOG message. A zero-length string
|
|
indicates an unknown app-name. The SYSLOG protocol
|
|
specification constrains this string to printable US-ASCII
|
|
code points."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.5)"
|
|
::= { syslogMsgEntry 7 }
|
|
|
|
syslogMsgProcID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The procid of the SYSLOG message. A zero-length string
|
|
indicates an unknown procid. The SYSLOG protocol
|
|
specification constrains this string to printable
|
|
US-ASCII code points."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.6)"
|
|
::= { syslogMsgEntry 8 }
|
|
|
|
syslogMsgMsgID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The msgid of the SYSLOG message. A zero-length string
|
|
indicates an unknown msgid. The SYSLOG protocol specification
|
|
constrains this string to printable US-ASCII code points."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.2.7)"
|
|
::= { syslogMsgEntry 9 }
|
|
|
|
syslogMsgSDParams OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of structured data element parameters
|
|
carried in the SYSLOG message. This number effectively
|
|
indicates the number of entries in the syslogMsgSDTable.
|
|
It can be used, for example, by a notification receiver
|
|
to determine whether a notification carried all
|
|
structured data element parameters of a SYSLOG message."
|
|
::= { syslogMsgEntry 10 }
|
|
|
|
syslogMsgMsg OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The message part of the SYSLOG message. The syntax does not
|
|
impose a size restriction. Implementations of this MIB module
|
|
may truncate the message part of the SYSLOG message such that
|
|
it fits into the size constraints imposed by the implementation
|
|
environment. Such truncations can also happen elsewhere in the
|
|
SYSLOG forwarding chain.
|
|
|
|
If the first octets contain the value 'EFBBBF'h, then the rest
|
|
of the message is a UTF-8 string. Since SYSLOG messages may be
|
|
truncated at arbitrary octet boundaries during forwarding, the
|
|
message may contain invalid UTF-8 encodings at the end."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Sections 6.1 and 6.4)"
|
|
::= { syslogMsgEntry 11 }
|
|
|
|
syslogMsgSDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SyslogMsgSDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing structured data elements of SYSLOG
|
|
messages."
|
|
::= { syslogMsgObjects 3 }
|
|
|
|
syslogMsgSDEntry OBJECT-TYPE
|
|
SYNTAX SyslogMsgSDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the syslogMsgSDTable."
|
|
INDEX { syslogMsgIndex, syslogMsgSDParamIndex,
|
|
syslogMsgSDID, syslogMsgSDParamName }
|
|
::= { syslogMsgSDTable 1 }
|
|
|
|
SyslogMsgSDEntry ::= SEQUENCE {
|
|
syslogMsgSDParamIndex Unsigned32,
|
|
syslogMsgSDID DisplayString,
|
|
syslogMsgSDParamName DisplayString,
|
|
syslogMsgSDParamValue SyslogParamValueString
|
|
}
|
|
|
|
syslogMsgSDParamIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indexes the structured data element parameters
|
|
contained in a SYSLOG message. The first structured data
|
|
element parameter has the index value 1, and subsequent
|
|
parameters are indexed by incrementing the index of the
|
|
previous parameter. The index increases across structured
|
|
data element boundaries so that the value reflects the
|
|
position of a structured data element parameter in a
|
|
SYSLOG message."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.3.3)"
|
|
::= { syslogMsgSDEntry 1 }
|
|
|
|
syslogMsgSDID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name (SD-ID) of a structured data element. The SYSLOG
|
|
protocol specification constrains this string to printable
|
|
US-ASCII code points."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.3.2)"
|
|
::= { syslogMsgSDEntry 2 }
|
|
|
|
syslogMsgSDParamName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a parameter of the structured data element. The
|
|
SYSLOG protocol specification constrains this string to
|
|
printable US-ASCII code points."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.3.3)"
|
|
::= { syslogMsgSDEntry 3 }
|
|
|
|
syslogMsgSDParamValue OBJECT-TYPE
|
|
SYNTAX SyslogParamValueString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the parameter of a SYSLOG message identified by
|
|
the index of this table. The value is stored in the unescaped
|
|
format."
|
|
REFERENCE
|
|
"RFC 5424: The Syslog Protocol (Section 6.3.3)"
|
|
::= { syslogMsgSDEntry 4 }
|
|
|
|
-- notification definitions
|
|
|
|
syslogMsgNotification NOTIFICATION-TYPE
|
|
OBJECTS { syslogMsgFacility, syslogMsgSeverity,
|
|
syslogMsgVersion, syslogMsgTimeStamp,
|
|
syslogMsgHostName, syslogMsgAppName,
|
|
syslogMsgProcID, syslogMsgMsgID,
|
|
syslogMsgSDParams, syslogMsgMsg }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The syslogMsgNotification is generated when a new SYSLOG
|
|
message is received and the value of
|
|
syslogMsgGenerateNotifications is true.
|
|
|
|
Implementations may add syslogMsgSDParamValue objects as long
|
|
as the resulting notification fits into the size constraints
|
|
imposed by the implementation environment and the notification
|
|
message size constraints imposed by maxMessageSize [RFC3412]
|
|
and SNMP transport mappings."
|
|
::= { syslogMsgNotifications 1 }
|
|
|
|
-- conformance statements
|
|
|
|
syslogMsgGroups OBJECT IDENTIFIER ::= { syslogMsgConformance 1 }
|
|
syslogMsgCompliances OBJECT IDENTIFIER ::= { syslogMsgConformance 2 }
|
|
|
|
syslogMsgFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for implementations of the
|
|
SYSLOG-MSG-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
syslogMsgGroup,
|
|
syslogMsgSDGroup,
|
|
syslogMsgControlGroup,
|
|
syslogMsgNotificationGroup
|
|
}
|
|
::= { syslogMsgCompliances 1 }
|
|
|
|
syslogMsgReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for implementations of the
|
|
SYSLOG-MSG-MIB that do not support read-write access."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
syslogMsgGroup,
|
|
syslogMsgSDGroup,
|
|
syslogMsgControlGroup,
|
|
syslogMsgNotificationGroup
|
|
}
|
|
OBJECT syslogMsgTableMaxSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
OBJECT syslogMsgEnableNotifications
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { syslogMsgCompliances 2 }
|
|
|
|
syslogMsgNotificationCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for implementations of the
|
|
SYSLOG-MSG-MIB that do only generate notifications and do not
|
|
provide a table to allow read access to SYSLOG message
|
|
details."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
|
|
syslogMsgGroup,
|
|
syslogMsgSDGroup,
|
|
syslogMsgNotificationGroup
|
|
}
|
|
OBJECT syslogMsgFacility
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgSeverity
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgVersion
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgTimeStamp
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgHostName
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgAppName
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgProcID
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgMsgID
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgSDParams
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgMsg
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
OBJECT syslogMsgSDParamValue
|
|
MIN-ACCESS accessible-for-notify
|
|
DESCRIPTION
|
|
"Read access is not required."
|
|
::= { syslogMsgCompliances 3 }
|
|
|
|
syslogMsgNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
syslogMsgNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notifications emitted by this MIB module."
|
|
::= { syslogMsgGroups 1 }
|
|
|
|
syslogMsgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- syslogMsgIndex,
|
|
syslogMsgFacility,
|
|
syslogMsgSeverity,
|
|
syslogMsgVersion,
|
|
syslogMsgTimeStamp,
|
|
syslogMsgHostName,
|
|
syslogMsgAppName,
|
|
syslogMsgProcID,
|
|
syslogMsgMsgID,
|
|
syslogMsgSDParams,
|
|
syslogMsgMsg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects representing a SYSLOG message,
|
|
excluding structured data elements."
|
|
::= { syslogMsgGroups 2 }
|
|
|
|
syslogMsgSDGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- syslogMsgSDParamIndex,
|
|
-- syslogMsgSDID,
|
|
-- syslogMsgSDParamName,
|
|
syslogMsgSDParamValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects representing the structured data
|
|
elements of a SYSLOG message."
|
|
::= { syslogMsgGroups 3 }
|
|
|
|
syslogMsgControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
syslogMsgTableMaxSize,
|
|
syslogMsgEnableNotifications
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of control objects to control the size of the
|
|
syslogMsgTable and to enable/disable notifications."
|
|
::= { syslogMsgGroups 4 }
|
|
|
|
END
|