1962 lines
71 KiB
Plaintext
1962 lines
71 KiB
Plaintext
SMF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Counter32, Integer32, TimeTicks, experimental
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
|
|
TEXTUAL-CONVENTION, RowStatus, TruthValue
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
|
|
InterfaceIndexOrZero, ifName
|
|
FROM IF-MIB -- RFC 2863
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC 3411
|
|
|
|
InetAddress, InetAddressType,
|
|
InetAddressPrefixLength
|
|
FROM INET-ADDRESS-MIB -- RFC 4001
|
|
|
|
IANAsmfOpModeIdTC,
|
|
IANAsmfRssaIdTC
|
|
FROM IANA-SMF-MIB
|
|
;
|
|
|
|
smfMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201410100000Z" -- October 10, 2014
|
|
ORGANIZATION "IETF MANET Working Group"
|
|
CONTACT-INFO
|
|
"WG EMail: manet@ietf.org
|
|
|
|
WG Chairs: sratliff@cisco.com
|
|
jmacker@nrl.navy.mil
|
|
|
|
Editors: Robert G. Cole
|
|
US Army CERDEC
|
|
6010 Frankford Road
|
|
Aberdeen Proving Ground, MD 21005
|
|
USA
|
|
Phone: +1 443 395-8744
|
|
EMail: robert.g.cole@us.army.mil
|
|
|
|
Joseph Macker
|
|
Naval Research Laboratory
|
|
Washington, D.C. 20375
|
|
USA
|
|
EMail: macker@itd.nrl.navy.mil
|
|
|
|
Brian Adamson
|
|
Naval Research Laboratory
|
|
Washington, D.C. 20375
|
|
USA
|
|
EMail: adamson@itd.nrl.navy.mil"
|
|
DESCRIPTION
|
|
"This MIB module contains managed object definitions for
|
|
the MANET SMF RSSA process defined in:
|
|
|
|
Macker, J., Ed., Simplified Multicast Forwarding, RFC 6621,
|
|
May 2012.
|
|
|
|
Copyright (c) 2014 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, is permitted pursuant to, and subject
|
|
to the license terms contained in, the Simplified BSD License
|
|
set forth in Section 4.c of the IETF Trust's Legal Provisions
|
|
Relating to IETF Documents
|
|
(http://trustee.ietf.org/license-info)."
|
|
|
|
-- Revision History
|
|
REVISION "201410100000Z" -- October 10, 2014
|
|
DESCRIPTION
|
|
"The first version of this MIB module,
|
|
published as RFC 7367.
|
|
"
|
|
::= { experimental 126 }
|
|
|
|
--
|
|
-- TEXTUAL CONVENTIONs
|
|
--
|
|
|
|
SmfStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the operability of an SMF
|
|
function or feature. For example, the status
|
|
of an interface: 'enabled' indicates that
|
|
this interface is performing SMF functions
|
|
and 'disabled' indicates that it is not.
|
|
Similarly, for the status of the device:
|
|
'enabled' indicates that the device has
|
|
enabled the SMF functions on the device and
|
|
'disabled' means that the device and all interfaces
|
|
have disabled all SMF functions."
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
--
|
|
-- Top-Level Object Identifier Assignments
|
|
|
|
--
|
|
|
|
smfMIBNotifications OBJECT IDENTIFIER ::= { smfMIB 0 }
|
|
smfMIBObjects OBJECT IDENTIFIER ::= { smfMIB 1 }
|
|
smfMIBConformance OBJECT IDENTIFIER ::= { smfMIB 2 }
|
|
|
|
--
|
|
-- smfMIBObjects Assignments:
|
|
-- smfCapabilitiesGroup - 1
|
|
-- smfConfigurationGroup - 2
|
|
-- smfStateGroup - 3
|
|
-- smfPerformanceGroup - 4
|
|
--
|
|
|
|
--
|
|
-- smfCapabilitiesGroup
|
|
--
|
|
-- This group contains the SMF objects that identify specific
|
|
-- capabilities within this device related to SMF functions.
|
|
--
|
|
|
|
smfCapabilitiesGroup OBJECT IDENTIFIER ::= { smfMIBObjects 1 }
|
|
|
|
--
|
|
-- SMF Capabilities Table
|
|
--
|
|
|
|
smfCapabilitiesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmfCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smfCapabilitiesTable identifies the
|
|
resident set of SMF Operational Modes and
|
|
RSSA combinations that can run on this
|
|
forwarder."
|
|
REFERENCE
|
|
"See Section 7.2 'Reduced Relay Set Forwarding',
|
|
Section 8.1.1 'SMF Message TLV Type', and
|
|
the Appendices A, B, and C in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., May 2012."
|
|
::= { smfCapabilitiesGroup 1 }
|
|
|
|
smfCapabilitiesEntry OBJECT-TYPE
|
|
SYNTAX SmfCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular operational
|
|
mode and RSSA combination.
|
|
"
|
|
INDEX { smfCapabilitiesIndex }
|
|
::= { smfCapabilitiesTable 1 }
|
|
|
|
SmfCapabilitiesEntry ::= SEQUENCE {
|
|
smfCapabilitiesIndex Integer32,
|
|
smfCapabilitiesOpModeID IANAsmfOpModeIdTC,
|
|
smfCapabilitiesRssaID IANAsmfRssaIdTC
|
|
}
|
|
|
|
smfCapabilitiesIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for this entry; a unique value,
|
|
greater than zero, for each combination of
|
|
a particular operational mode and RSSA
|
|
available on this device.
|
|
It is recommended that values are assigned
|
|
contiguously starting from 1.
|
|
|
|
Rows in this table are automatically
|
|
populated by the entity's management system
|
|
on initialization.
|
|
|
|
By default, the agent should support at least the
|
|
Classical Flooding 'cF' algorithm. All compliant
|
|
SMF forwarders must support Classical Flooding.
|
|
Hence, the first entry in this table MUST exist
|
|
and MUST be defined as:
|
|
|
|
smfCapabilitiesIndex i '1'
|
|
smfCapabilitiesOpModeID i 'cfOnly(1)'
|
|
smfCapabilitiesRssaID i 'cF(1)'
|
|
|
|
The value for each combination MUST remain
|
|
constant at least from one re-initialization
|
|
of the entity's management system to the
|
|
next re-initialization."
|
|
::= { smfCapabilitiesEntry 1 }
|
|
|
|
smfCapabilitiesOpModeID OBJECT-TYPE
|
|
SYNTAX IANAsmfOpModeIdTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies
|
|
the particular operational mode for this device."
|
|
::= { smfCapabilitiesEntry 2 }
|
|
|
|
smfCapabilitiesRssaID OBJECT-TYPE
|
|
SYNTAX IANAsmfRssaIdTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies
|
|
the particular RSSA algorithm in this MIB
|
|
module. Example RSSAs are found in the
|
|
appendix of RFC 6621."
|
|
REFERENCE
|
|
"For example, see Section 8.1.1 'SMF Message TLV Type',
|
|
and the Appendices A, B, and C in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., May 2012."
|
|
::= { smfCapabilitiesEntry 3 }
|
|
|
|
--
|
|
-- smfConfigurationGroup
|
|
--
|
|
-- This group contains the SMF objects that configure specific
|
|
-- options that determine the overall performance and operation
|
|
-- of the multicast forwarding process for the router device
|
|
-- and its interfaces.
|
|
--
|
|
|
|
smfConfigurationGroup OBJECT IDENTIFIER ::= { smfMIBObjects 2 }
|
|
|
|
smfCfgAdminStatus OBJECT-TYPE
|
|
SYNTAX SmfStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured status of the SMF process
|
|
on this device. 'enabled(1)' means that
|
|
SMF is configured to run on this device.
|
|
'disabled(2)' means that the SMF process
|
|
is configured off.
|
|
|
|
Prior to SMF functions being performed over
|
|
specific interfaces, this object must first
|
|
be 'enabled'. If this object is 'disabled',
|
|
then no SMF functions are being performed on
|
|
|
|
the device and all smfCfgIfAdminStatus objects
|
|
MUST also be set to 'disabled'. When this
|
|
object is changed from 'enabled' to 'disabled'
|
|
by the manager, then all smfCfgIfAdminStatus
|
|
objects MUST also be automatically set to
|
|
'disabled' by the agent.
|
|
|
|
The default value for this object SHOULD be
|
|
'enabled'.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
DEFVAL { enabled }
|
|
::= { smfConfigurationGroup 1 }
|
|
|
|
smfCfgSmfSysUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
system SMF process was last re-initialized.
|
|
The SMF process is re-initialized when the
|
|
value of the 'smfCfgAdminStatus' object
|
|
transitions to 'enabled' from either a prior
|
|
value of 'disabled' or upon initialization
|
|
of this device."
|
|
::= { smfConfigurationGroup 2 }
|
|
|
|
smfCfgRouterIDAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the address used for
|
|
the SMF ID of this router as specified
|
|
in the 'smfCfgRouterID' next.
|
|
|
|
Only the values ipv4(1) and ipv6(2)
|
|
are supported.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
DEFVAL { ipv4 }
|
|
::= { smfConfigurationGroup 3 }
|
|
|
|
smfCfgRouterID OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address used as the SMF router ID.
|
|
This can be set by the management station.
|
|
If not explicitly set, then the device
|
|
SHOULD select a routable IP address
|
|
assigned to this router for use as
|
|
the 'smfCfgRouterID'.
|
|
|
|
The smfCfgRouterID is a logical identification
|
|
that MUST be consistent across interoperable
|
|
SMF neighborhoods, and it is RECOMMENDED to be
|
|
chosen as the numerically largest address
|
|
contained in a node's 'Neighbor Address List'
|
|
as defined in NHDP. An smfCfgRouterID MUST be
|
|
unique within the scope of the operating
|
|
MANET network regardless of the method used
|
|
for selecting it.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"For example, see
|
|
|
|
Appendix A.1 'E-CDS Relay Set Selection Overview'
|
|
|
|
and
|
|
|
|
Appendix C.1 'MPR-CDS Relay Set Selection
|
|
Overview' in
|
|
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfConfigurationGroup 4 }
|
|
|
|
smfCfgOperationalMode OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF RSS node operational mode and
|
|
RSSA combination active on this
|
|
local forwarder. This object is defined
|
|
to be equal to the smfCapabilitiesIndex,
|
|
which identifies the specific active
|
|
operational mode and RSSA.
|
|
|
|
The default value for this object is
|
|
'1', which corresponds to:
|
|
|
|
smfCapabilitiesOpModeID i 'cfOnly(1)'
|
|
smfCapabilitiesRssaID i 'cF(1)'
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 7.2 'Reduced Relay Set Forwarding',
|
|
and the Appendices A, B, and C in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { 1 }
|
|
::= { smfConfigurationGroup 5 }
|
|
|
|
smfCfgRssaMember OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
potential(1),
|
|
always(2),
|
|
never(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RSSA downselects a set of forwarders for
|
|
multicast forwarding. Sometimes it is useful
|
|
to force an agent to be included or excluded
|
|
from the resulting RSS. This object is a
|
|
switch to allow for this behavior.
|
|
|
|
The value 'potential(1)' allows the selected
|
|
RSSA to determine if this agent is included
|
|
or excluded from the RSS.
|
|
|
|
The value 'always(2)' forces the selected
|
|
RSSA to include this agent in the RSS.
|
|
|
|
The value 'never(3)' forces the selected
|
|
RSSA to exclude this agent from the RSS.
|
|
|
|
The default setting for this object is
|
|
'potential(1)'. Other settings could pose
|
|
operational risks under certain conditions.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 7 'Relay Set Selection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { potential }
|
|
::= { smfConfigurationGroup 6 }
|
|
|
|
smfCfgIpv4Dpd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hashBased(1),
|
|
identificationBased(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current method for IPv4 duplicate packet
|
|
detection.
|
|
|
|
The value 'hashBased(1)' indicates that the
|
|
router's duplicate packet detection is based
|
|
upon comparing a hash over the packet fields.
|
|
This is the default setting for this object.
|
|
|
|
The value 'identificationBased(2)'
|
|
indicates that the duplicate packet
|
|
detection relies upon header information
|
|
in the multicast packets to identify
|
|
previously received packets.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 6.2 'IPv4 Duplicate Packet
|
|
Detection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { hashBased }
|
|
::= { smfConfigurationGroup 7 }
|
|
|
|
smfCfgIpv6Dpd OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hashBased(1),
|
|
identificationBased(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current method for IPv6 duplicate packet
|
|
detection.
|
|
|
|
The values indicate the type of method used
|
|
for duplicate packet detection as described
|
|
the previous description for the object
|
|
'smfCfgIpv4Dpd'.
|
|
|
|
The default value for this object is
|
|
'hashBased(1)'.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 6.1 'IPv6 Duplicate Packet
|
|
Detection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { hashBased }
|
|
::= { smfConfigurationGroup 8 }
|
|
|
|
smfCfgMaxPktLifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The estimate of the network packet
|
|
traversal time.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 6 'SMF Duplicate Packet
|
|
Detection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { 60 }
|
|
::= { smfConfigurationGroup 9 }
|
|
|
|
smfCfgDpdEntryMaxLifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65525)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum lifetime of a cached DPD
|
|
record in the local device storage.
|
|
|
|
If the memory is running low prior to the
|
|
MaxLifetime being exceeded, the local SMF
|
|
devices should purge the oldest records first.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 6 'SMF Duplicate Packet
|
|
Detection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { 600 }
|
|
::= { smfConfigurationGroup 10 }
|
|
|
|
--
|
|
-- Configuration of messages to be included in
|
|
-- NHDP message exchanges in support of SMF
|
|
-- operations.
|
|
--
|
|
|
|
smfCfgNhdpRssaMesgTLVIncluded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the associated NHDP
|
|
messages include the RSSA Message TLV. This
|
|
is an optional SMF operational setting.
|
|
The value 'true(1)' indicates that this TLV is
|
|
included; the value 'false(2)' indicates that it
|
|
is not included.
|
|
|
|
It is RECOMMENDED that the RSSA Message TLV
|
|
be included in the NHDP messages.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 8.1.1 'SMF Message TLV Type' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { true }
|
|
::= { smfConfigurationGroup 11 }
|
|
|
|
smfCfgNhdpRssaAddrBlockTLVIncluded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the associated NHDP
|
|
messages include the RSSA Address Block TLV.
|
|
This is an optional SMF operational setting.
|
|
The value 'true(1)' indicates that this TLV is
|
|
included; the value 'false(2)' indicates that it
|
|
is not included.
|
|
|
|
The smfCfgNhdpRssaAddrBlockTLVIncluded is optional
|
|
in all cases as it depends on the existence of
|
|
an address block that may not be present.
|
|
If this SMF device is configured with NHDP,
|
|
then this object SHOULD be set to 'true(1)'.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
REFERENCE
|
|
"See Section 8.1.2 'SMF Address Block TLV
|
|
Type' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
DEFVAL { true }
|
|
::= { smfConfigurationGroup 12 }
|
|
|
|
--
|
|
-- Table identifying configured multicast addresses to be forwarded.
|
|
--
|
|
|
|
smfCfgAddrForwardingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmfCfgAddrForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smfCfgAddrForwardingTable is essentially a filter
|
|
table (if populated) that identifies addresses/packets
|
|
to be forwarded via the local SMF flooding process.
|
|
The IP Multicast MIB module in RFC 5132 manages objects
|
|
related to standard IP multicast, which could be running
|
|
in parallel to SMF on the device.
|
|
|
|
RFC 5132 manages traditional IP-based multicast (based
|
|
upon multicast routing mechanisms). The SMF-MIB module
|
|
provides management for a MANET subnet-based flooding
|
|
mechanism that may be used for multicast transport
|
|
(through SMF broadcast) depending upon the MANET dynamics
|
|
and other factors regarding the MANET subnet. Further,
|
|
they may coexist in certain MANET deployments
|
|
using the smfCfgAddrForwardingTable to hand certain IP
|
|
multicast addresses to the SMF process and other IP
|
|
multicast packets to be forwarded by other
|
|
multicast mechanisms that are IP route based. SMF and
|
|
the associated SMF-MIB module are experimental and these
|
|
are some of the experiments to be had with SMF and
|
|
the SMF-MIB module.
|
|
|
|
This is the (conceptual) table containing information on
|
|
multicast addresses that are to be forwarded by the SMF
|
|
process. This table represents an IP filters table for
|
|
forwarding (or not) packets based upon their IP
|
|
multicast address.
|
|
|
|
The SMF process can be configured to forward only those
|
|
multicast addresses found within the
|
|
smfCfgAddrForwardingTable. As such, addresses that are
|
|
to be forwarded by the SMF process MUST be found within
|
|
the address ranges configured within this table, unless
|
|
this table is empty.
|
|
|
|
Each row is associated with a range of multicast
|
|
addresses, and ranges for different rows must be disjoint.
|
|
Different rows MAY share a common
|
|
smfCfgAddrForwardingGroupName to administratively
|
|
associate different rows.
|
|
|
|
The objects in this table are persistent and, when written,
|
|
the entity SHOULD save the change to non-volatile storage."
|
|
REFERENCE
|
|
"See Section 9.1 'Forwarded Multicast Groups' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfConfigurationGroup 13 }
|
|
|
|
smfCfgAddrForwardingEntry OBJECT-TYPE
|
|
SYNTAX SmfCfgAddrForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the information on a
|
|
|
|
particular multicast scope."
|
|
INDEX { smfCfgAddrForwardingIndex }
|
|
::= { smfCfgAddrForwardingTable 1 }
|
|
|
|
SmfCfgAddrForwardingEntry ::= SEQUENCE {
|
|
smfCfgAddrForwardingIndex Integer32,
|
|
smfCfgAddrForwardingGroupName SnmpAdminString,
|
|
smfCfgAddrForwardingAddrType InetAddressType,
|
|
smfCfgAddrForwardingAddress InetAddress,
|
|
smfCfgAddrForwardingAddrPrefixLength
|
|
InetAddressPrefixLength,
|
|
smfCfgAddrForwardingStatus RowStatus
|
|
}
|
|
|
|
smfCfgAddrForwardingIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a unique entry
|
|
for a forwarding group. The index for
|
|
this entry is a unique value,
|
|
greater than zero, for each row.
|
|
It is recommended that values are assigned
|
|
contiguously starting from 1.
|
|
|
|
The value for each row index MUST remain
|
|
constant from one re-initialization
|
|
of the entity's management system to the
|
|
next re-initialization."
|
|
::= { smfCfgAddrForwardingEntry 1 }
|
|
|
|
smfCfgAddrForwardingGroupName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a group name for a set of
|
|
row entries in order to administratively associate
|
|
a set of address ranges.
|
|
|
|
If there is no group name or this object is
|
|
otherwise not applicable, then this object contains
|
|
a zero-length string.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
::= { smfCfgAddrForwardingEntry 2 }
|
|
|
|
smfCfgAddrForwardingAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the addresses in the multicast
|
|
forwarding ranges identified by this table.
|
|
|
|
Only the values ipv4(1) and ipv6(2) are
|
|
supported.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
::= { smfCfgAddrForwardingEntry 3 }
|
|
|
|
smfCfgAddrForwardingAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group address that, when
|
|
combined with smfCfgAddrForwardingAddrPrefixLength,
|
|
gives the group prefix for this forwarding range.
|
|
The InetAddressType is given by
|
|
smfCfgAddrForwardingAddrType.
|
|
|
|
This address object is only significant up to
|
|
smfCfgAddrForwardingAddrPrefixLength bits. The
|
|
remaining address bits are set to zero. This is
|
|
especially important for this index field.
|
|
Any non-zero bits would signify an entirely
|
|
different entry.
|
|
|
|
Legal values correspond to the subset of address
|
|
families for which multicast address allocation
|
|
is supported.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
::= { smfCfgAddrForwardingEntry 4 }
|
|
|
|
smfCfgAddrForwardingAddrPrefixLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length in bits of the mask that, when
|
|
combined with smfCfgAddrForwardingAddress,
|
|
gives the group prefix for this forwarding
|
|
range.
|
|
|
|
This object is persistent and, when written,
|
|
the entity SHOULD save the change to
|
|
non-volatile storage."
|
|
::= { smfCfgAddrForwardingEntry 5 }
|
|
|
|
smfCfgAddrForwardingStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { smfCfgAddrForwardingEntry 6 }
|
|
|
|
--
|
|
-- SMF Interfaces Configuration Table
|
|
--
|
|
|
|
smfCfgInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmfCfgInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF Interface Table describes the SMF
|
|
interfaces that are participating in the
|
|
SMF packet forwarding process. The ifIndex is
|
|
from the interfaces group defined in the
|
|
Interfaces Group MIB module (RFC 2863). As such,
|
|
this table 'sparse augments' the ifTable
|
|
specifically when SMF is to be configured to
|
|
operate over this interface.
|
|
|
|
A conceptual row in this table exists if and only
|
|
if either a manager has explicitly created the row
|
|
or there is an interface on the managed device
|
|
that automatically supports and runs SMF as part
|
|
of the device's initialization process.
|
|
|
|
The manager creates a row in this table by setting
|
|
the rowStatus to 'createAndGo' or 'createAndWait'.
|
|
Row objects having associated DEFVAL clauses are
|
|
|
|
automatically defined by the agent with these
|
|
values during row creation, unless the manager
|
|
explicitly defines these object values during the
|
|
row creation.
|
|
|
|
As the smfCfgInterfaceTable sparsely augments the
|
|
IfTable. Hence,
|
|
+ an entry cannot exist in smfCfgInterfaceTable
|
|
without a corresponding entry in the ifTable.
|
|
|
|
+ if an entry in the ifTable is removed, the
|
|
corresponding entry (if it exists) in the
|
|
smfCfgInterfaceTable MUST be removed.
|
|
|
|
+ the smfCfgIfStatus can have a value of
|
|
'enabled' or 'disabled' independent of the
|
|
current value of the ifAdminStatus of the
|
|
corresponding entry in the ifTable.
|
|
|
|
The values of the objects smfCfgAdminStatus and
|
|
smfCfgIfAdminStatus reflect the up-down status of
|
|
the SMF process running on the device and on the
|
|
specific interfaces, respectively. Hence,
|
|
+ the value of the smfCfgAdminStatus can be
|
|
'enabled' or 'disabled' reflecting the current
|
|
running status of the SMF process on the device.
|
|
|
|
+ the value of the smfCfgIfAdminStatus can be
|
|
'enabled' or 'disabled' if the value of the
|
|
smfCfgAdminStatus is set to 'enabled'.
|
|
|
|
+ if the value of the smfCfgAdminStatus is
|
|
'disabled', then the corresponding
|
|
smfCfgIfAdminStatus objects MUST be set
|
|
to 'disabled' in the smfCfgInterfaceTable.
|
|
|
|
+ once the value of the smfCfgAdminStatus changes
|
|
from 'disabled' to 'enabled', it is up to the
|
|
management system to make the corresponding
|
|
changes to the smfCfgIfAdminStatus values
|
|
back to 'enabled'.
|
|
"
|
|
REFERENCE
|
|
"RFC 2863 - 'The Interfaces Group MIB', McCloghrie,
|
|
K., and F. Kastenholtz, June 2000."
|
|
::= { smfConfigurationGroup 14 }
|
|
|
|
smfCfgInterfaceEntry OBJECT-TYPE
|
|
SYNTAX SmfCfgInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF interface entry describes one SMF
|
|
interface as indexed by its ifIndex.
|
|
|
|
The objects in this table are persistent and, when
|
|
written, the device SHOULD save the change to
|
|
non-volatile storage. For further information
|
|
on the storage behavior for these objects, refer
|
|
to the description for the smfCfgIfRowStatus
|
|
object."
|
|
INDEX { smfCfgIfIndex }
|
|
::= { smfCfgInterfaceTable 1 }
|
|
|
|
SmfCfgInterfaceEntry ::=
|
|
SEQUENCE {
|
|
smfCfgIfIndex InterfaceIndexOrZero,
|
|
smfCfgIfAdminStatus SmfStatus,
|
|
smfCfgIfSmfUpTime TimeTicks,
|
|
smfCfgIfRowStatus RowStatus
|
|
}
|
|
|
|
smfCfgIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex for this SMF interface. This value
|
|
MUST correspond to an ifIndex referring
|
|
to a valid entry in the Interfaces Table.
|
|
If the manager attempts to create a row
|
|
for which the ifIndex does not exist on the
|
|
local device, then the agent SHOULD issue
|
|
a return value of 'inconsistentValue' and
|
|
the operation SHOULD fail."
|
|
REFERENCE
|
|
"RFC 2863 - 'The Interfaces Group MIB', McCloghrie,
|
|
K., and F. Kastenholtz, June 2000."
|
|
::= { smfCfgInterfaceEntry 1 }
|
|
|
|
smfCfgIfAdminStatus OBJECT-TYPE
|
|
SYNTAX SmfStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF interface's administrative status.
|
|
The value 'enabled' denotes that the interface
|
|
is running the SMF forwarding process.
|
|
The value 'disabled' denotes that the interface is
|
|
currently external to the SMF forwarding process.
|
|
|
|
When the value of the smfCfgAdminStatus is
|
|
'disabled', then the corresponding smfCfgIfAdminStatus
|
|
objects MUST be set to 'disabled' in the
|
|
smfCfgInterfaceTable.
|
|
|
|
If this object is not equal to 'enabled', all associated
|
|
entries in the 'smfPerfIpv4InterfacePerfTable' and the
|
|
'smfPerfIpv6InterfacePerfTable' MUST be deleted.
|
|
|
|
The default value for this object is 'enabled(1)'.
|
|
|
|
This object SHOULD be persistent and when
|
|
written the device SHOULD save the change to
|
|
non-volatile storage."
|
|
DEFVAL { enabled }
|
|
::= { smfCfgInterfaceEntry 2 }
|
|
|
|
smfCfgIfSmfUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since
|
|
this interface SMF process was last
|
|
re-initialized. The interface SMF process is
|
|
re-initialized when the value of the
|
|
'smfCfgIfAdminStatus' object transitions to 'enabled'
|
|
from either a prior value of 'disabled' or upon
|
|
initialization of this interface or this device."
|
|
::= { smfCfgInterfaceEntry 3 }
|
|
|
|
smfCfgIfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object permits management of this table
|
|
by facilitating actions such as row creation,
|
|
construction, and destruction. The value of
|
|
this object has no effect on whether other
|
|
objects in this conceptual row can be
|
|
modified.
|
|
|
|
An entry may not exist in the 'active' state unless all
|
|
objects in the entry have a defined appropriate value. For
|
|
objects with DEFVAL clauses, the management station
|
|
does not need to specify the value of these objects in order
|
|
for the row to transit to the 'active' state; the default
|
|
value for these objects is used. For objects that do not
|
|
have DEFVAL clauses, the network manager MUST
|
|
specify the value of these objects prior to this row
|
|
transitioning to the 'active' state.
|
|
|
|
When this object transitions to 'active', all objects
|
|
in this row SHOULD be written to non-volatile (stable)
|
|
storage. Read-create objects in this row MAY be modified.
|
|
When an object in a row with smfCfgIfRowStatus of 'active'
|
|
is changed, then the updated value MUST be reflected in SMF
|
|
and this new object value MUST be written to non-volatile
|
|
storage."
|
|
::= { smfCfgInterfaceEntry 4 }
|
|
|
|
--
|
|
-- smfStateGroup
|
|
--
|
|
-- Contains information describing the current state of the SMF
|
|
-- process such as the current inclusion in the RS or not.
|
|
--
|
|
|
|
smfStateGroup OBJECT IDENTIFIER ::= { smfMIBObjects 3 }
|
|
|
|
smfStateNodeRsStatusIncluded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of the SMF node in the context of
|
|
the MANETs relay set. A value of 'true(1)' indicates
|
|
that the node is currently part of the MANET Relay
|
|
Set. A value of 'false(2)' indicates that the node
|
|
is currently not part of the MANET Relay Set."
|
|
REFERENCE
|
|
"See Section 7 'Relay Set Selection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfStateGroup 1 }
|
|
|
|
smfStateDpdMemoryOverflow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "DPD Records"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DPD records that had to be flushed to
|
|
prevent memory overruns for caching of these records.
|
|
The number of records to be flushed upon a buffer
|
|
overflow is an implementation specific decision.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 6 'SMF Duplicate Packet
|
|
Detection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfStateGroup 2 }
|
|
|
|
--
|
|
-- SMF Neighbor Table
|
|
--
|
|
|
|
smfStateNeighborTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmfStateNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF StateNeighborTable describes the
|
|
current one-hop neighbor nodes, their address
|
|
and SMF RSSA, and the interface on which
|
|
they can be reached."
|
|
REFERENCE
|
|
"See Section 8 'SMF Neighborhood Discovery' and
|
|
Section 8.1. 'SMF Relay Algorithm TLV
|
|
Types' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfStateGroup 3 }
|
|
|
|
smfStateNeighborEntry OBJECT-TYPE
|
|
SYNTAX SmfStateNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF Neighbor Table contains the
|
|
set of one-hop neighbors, the interface
|
|
|
|
they are reachable on, and the SMF RSSA
|
|
they are currently running."
|
|
INDEX { smfStateNeighborIpAddrType,
|
|
smfStateNeighborIpAddr,
|
|
smfStateNeighborPrefixLen }
|
|
::= { smfStateNeighborTable 1 }
|
|
|
|
SmfStateNeighborEntry ::=
|
|
SEQUENCE {
|
|
smfStateNeighborIpAddrType InetAddressType,
|
|
smfStateNeighborIpAddr InetAddress,
|
|
smfStateNeighborPrefixLen InetAddressPrefixLength,
|
|
smfStateNeighborRSSA IANAsmfRssaIdTC,
|
|
smfStateNeighborNextHopInterface InterfaceIndexOrZero
|
|
}
|
|
|
|
smfStateNeighborIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The one-hop neighbor IP address type.
|
|
|
|
Only the values 'ipv4(1)' and
|
|
'ipv6(2)' are supported."
|
|
::= { smfStateNeighborEntry 1 }
|
|
|
|
smfStateNeighborIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(4|16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The one-hop neighbor Inet IPv4 or IPv6
|
|
address.
|
|
|
|
Only IPv4 and IPv6 addresses
|
|
are supported."
|
|
::= { smfStateNeighborEntry 2 }
|
|
|
|
smfStateNeighborPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
UNITS "bits"
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length. This is a decimal value that
|
|
indicates the number of contiguous, higher-order
|
|
bits of the address that make up the network
|
|
|
|
portion of the address."
|
|
::= { smfStateNeighborEntry 3 }
|
|
|
|
smfStateNeighborRSSA OBJECT-TYPE
|
|
SYNTAX IANAsmfRssaIdTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current RSSA running on the neighbor."
|
|
::= { smfStateNeighborEntry 4 }
|
|
|
|
smfStateNeighborNextHopInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface ifIndex over which the
|
|
neighbor is reachable in one-hop."
|
|
::= { smfStateNeighborEntry 6 }
|
|
|
|
--
|
|
-- SMF Performance Group
|
|
--
|
|
-- Contains objects that help to characterize the
|
|
-- performance of the SMF RSSA process, such as statistics
|
|
-- counters. There are two types of SMF RSSA statistics:
|
|
-- global counters and per-interface counters.
|
|
--
|
|
-- It is an expectation that SMF devices will
|
|
-- implement the standard IP-MIB module in RFC 4293.
|
|
-- Exactly how to integrate SMF packet handling and
|
|
-- management into the standard IP-MIB module management
|
|
-- is part of the experiment.
|
|
--
|
|
-- The SMF-MIB module counters within the
|
|
-- smfPerformanceGroup count packets handled by the
|
|
-- system and interface local SMF process (as discussed
|
|
-- above). Not all IP (unicast and multicast) packets
|
|
-- on a device interface are handled by the SMF process.
|
|
-- So the counters are tracking different packet streams
|
|
-- in the IP-MIB and SMF-MIB modules.
|
|
--
|
|
|
|
smfPerformanceGroup OBJECT IDENTIFIER ::= { smfMIBObjects 4 }
|
|
|
|
smfPerfGobalGroup OBJECT IDENTIFIER ::= { smfPerformanceGroup 1 }
|
|
|
|
--
|
|
|
|
-- IPv4 packet counters
|
|
--
|
|
|
|
smfPerfIpv4MultiPktsRecvTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of
|
|
multicast IPv4 packets received by the
|
|
device and delivered to the SMF process.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
::= { smfPerfGobalGroup 1 }
|
|
|
|
smfPerfIpv4MultiPktsForwardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of
|
|
multicast IPv4 packets forwarded by the
|
|
device.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
::= { smfPerfGobalGroup 2 }
|
|
|
|
smfPerfIpv4DuplMultiPktsDetectedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of duplicate
|
|
multicast IPv4 packets detected by the
|
|
device.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 6.2 'IPv4 Duplicate Packet
|
|
Detection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 3 }
|
|
|
|
smfPerfIpv4DroppedMultiPktsTTLExceededTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of dropped
|
|
multicast IPv4 packets by the
|
|
device due to Time to Live (TTL) exceeded.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 5 'SMF Packet Processing and
|
|
Forwarding' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 4 }
|
|
|
|
smfPerfIpv4TTLLargerThanPreviousTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv4 packets
|
|
received that have a TTL larger than that
|
|
of a previously received identical packet.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 5 'SMF Packet Processing and
|
|
Forwarding' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 5 }
|
|
|
|
--
|
|
-- IPv6 packet counters
|
|
--
|
|
|
|
smfPerfIpv6MultiPktsRecvTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of
|
|
multicast IPv6 packets received by the
|
|
device and delivered to the SMF process.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
::= { smfPerfGobalGroup 6 }
|
|
|
|
smfPerfIpv6MultiPktsForwardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of
|
|
multicast IPv6 packets forwarded by the
|
|
device.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
::= { smfPerfGobalGroup 7 }
|
|
|
|
smfPerfIpv6DuplMultiPktsDetectedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of duplicate
|
|
multicast IPv6 packets detected by the
|
|
device.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 6.1 'IPv6 Duplicate Packet
|
|
Detection' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 8 }
|
|
|
|
smfPerfIpv6DroppedMultiPktsTTLExceededTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of dropped
|
|
multicast IPv6 packets by the
|
|
device due to TTL exceeded.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 5 'SMF Packet Processing and
|
|
Forwarding' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 9 }
|
|
|
|
smfPerfIpv6TTLLargerThanPreviousTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv6 packets
|
|
received that have a TTL larger than that
|
|
of a previously received identical packet.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 5 'SMF Packet Processing and
|
|
Forwarding' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 10 }
|
|
|
|
smfPerfIpv6HAVAssistsReqdTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv6 packets
|
|
received that required the Hash Assist Value (HAV)
|
|
for DPD.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 6.1.1 'IPv6 SMF_DPD Option Header' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 11 }
|
|
|
|
smfPerfIpv6DpdHeaderInsertionsTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv6 packets
|
|
received that the device inserted the
|
|
DPD header option.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled. In order to check for
|
|
the occurrence of such a discontinuity when monitoring
|
|
this counter object, it is recommended that the
|
|
smfCfgSmfSysUpTime object also be monitored."
|
|
REFERENCE
|
|
"See Section 6.1.2 'IPv6 Identification-Based
|
|
DPD' in
|
|
RFC 6621 - 'Simplified Multicast Forwarding',
|
|
Macker, J., Ed., May 2012."
|
|
::= { smfPerfGobalGroup 12 }
|
|
|
|
--
|
|
-- Per SMF Interface Performance Table
|
|
--
|
|
|
|
smfPerfInterfaceGroup OBJECT IDENTIFIER ::= { smfPerformanceGroup 2 }
|
|
|
|
smfPerfIpv4InterfacePerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmfPerfIpv4InterfacePerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF Interface Performance Table
|
|
describes the SMF counters per
|
|
interface."
|
|
::= { smfPerfInterfaceGroup 1 }
|
|
|
|
smfPerfIpv4InterfacePerfEntry OBJECT-TYPE
|
|
SYNTAX SmfPerfIpv4InterfacePerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF Interface Performance entry
|
|
describes the statistics for a particular
|
|
node interface."
|
|
INDEX { smfCfgIfIndex }
|
|
::= { smfPerfIpv4InterfacePerfTable 1 }
|
|
|
|
SmfPerfIpv4InterfacePerfEntry ::=
|
|
|
|
SEQUENCE {
|
|
smfPerfIpv4MultiPktsRecvPerIf Counter32,
|
|
smfPerfIpv4MultiPktsForwardedPerIf Counter32,
|
|
smfPerfIpv4DuplMultiPktsDetectedPerIf Counter32,
|
|
smfPerfIpv4DroppedMultiPktsTTLExceededPerIf Counter32,
|
|
smfPerfIpv4TTLLargerThanPreviousPerIf Counter32
|
|
}
|
|
|
|
smfPerfIpv4MultiPktsRecvPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the number of multicast IP
|
|
packets received by the SMF process on
|
|
this device on this interface.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv4InterfacePerfEntry 1 }
|
|
|
|
smfPerfIpv4MultiPktsForwardedPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the number of
|
|
multicast IP packets forwarded by the
|
|
SMF process on this device
|
|
on this interface.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv4InterfacePerfEntry 2 }
|
|
|
|
smfPerfIpv4DuplMultiPktsDetectedPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the number of duplicate
|
|
multicast IP packets detected by the
|
|
SMF process on this device
|
|
on this interface.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv4InterfacePerfEntry 3 }
|
|
|
|
smfPerfIpv4DroppedMultiPktsTTLExceededPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of dropped
|
|
multicast IPv4 packets by the SMF process
|
|
on this device on this interface
|
|
due to TTL exceeded.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv4InterfacePerfEntry 4 }
|
|
|
|
smfPerfIpv4TTLLargerThanPreviousPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv4 packets
|
|
received by the SMF process on this device
|
|
on this interface that have a TTL larger than
|
|
|
|
that of a previously received identical packet.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv4InterfacePerfEntry 5 }
|
|
|
|
smfPerfIpv6InterfacePerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SmfPerfIpv6InterfacePerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF Interface Performance Table
|
|
describes the SMF counters per
|
|
interface."
|
|
::= { smfPerfInterfaceGroup 2 }
|
|
|
|
smfPerfIpv6InterfacePerfEntry OBJECT-TYPE
|
|
SYNTAX SmfPerfIpv6InterfacePerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMF Interface Performance entry
|
|
describes the counters for a particular
|
|
node interface."
|
|
INDEX { smfCfgIfIndex }
|
|
::= { smfPerfIpv6InterfacePerfTable 1 }
|
|
|
|
SmfPerfIpv6InterfacePerfEntry ::=
|
|
SEQUENCE {
|
|
smfPerfIpv6MultiPktsRecvPerIf Counter32,
|
|
smfPerfIpv6MultiPktsForwardedPerIf Counter32,
|
|
smfPerfIpv6DuplMultiPktsDetectedPerIf Counter32,
|
|
smfPerfIpv6DroppedMultiPktsTTLExceededPerIf Counter32,
|
|
smfPerfIpv6TTLLargerThanPreviousPerIf Counter32,
|
|
smfPerfIpv6HAVAssistsReqdPerIf Counter32,
|
|
smfPerfIpv6DpdHeaderInsertionsPerIf Counter32
|
|
}
|
|
|
|
smfPerfIpv6MultiPktsRecvPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the number of
|
|
multicast IP packets received by the
|
|
SMF process on this device
|
|
on this interface.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv6InterfacePerfEntry 1 }
|
|
|
|
smfPerfIpv6MultiPktsForwardedPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the number of
|
|
multicast IP packets forwarded by the
|
|
SMF process on this device
|
|
on this interface.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv6InterfacePerfEntry 2 }
|
|
|
|
smfPerfIpv6DuplMultiPktsDetectedPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the number of duplicate
|
|
multicast IP packets detected by the
|
|
SMF process on this device
|
|
on this interface.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv6InterfacePerfEntry 3 }
|
|
|
|
smfPerfIpv6DroppedMultiPktsTTLExceededPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the number of dropped
|
|
multicast IP packets by the
|
|
SMF process on this device
|
|
on this interface due to TTL
|
|
exceeded.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv6InterfacePerfEntry 4 }
|
|
|
|
smfPerfIpv6TTLLargerThanPreviousPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv6 packets
|
|
received that have a TTL larger than that
|
|
of a previously received identical packet
|
|
by the SMF process on this device on this
|
|
interface.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv6InterfacePerfEntry 5 }
|
|
|
|
smfPerfIpv6HAVAssistsReqdPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv6 packets
|
|
received by the SMF process on this device
|
|
on this interface that required the
|
|
HAV assist for DPD.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv6InterfacePerfEntry 6 }
|
|
|
|
smfPerfIpv6DpdHeaderInsertionsPerIf OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A counter of the total number of IPv6 packets
|
|
received by the SMF process on this device
|
|
on this interface that the device inserted the
|
|
DPD header option.
|
|
|
|
There is the potential for a counter discontinuity
|
|
in this object if the system SMF process has been
|
|
disabled and later enabled on this interface.
|
|
In order to check for the occurrence of such a
|
|
discontinuity when monitoring this counter object,
|
|
it is recommended that the smfCfgIfSmfUpTime
|
|
object also be monitored."
|
|
::= { smfPerfIpv6InterfacePerfEntry 7 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
smfMIBNotifObjects OBJECT IDENTIFIER ::= { smfMIBNotifications 0 }
|
|
smfMIBNotifControl OBJECT IDENTIFIER ::= { smfMIBNotifications 1 }
|
|
|
|
-- smfMIBNotifObjects
|
|
|
|
smfNotifAdminStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { smfCfgRouterIDAddrType, -- The originator of
|
|
-- the notification.
|
|
smfCfgRouterID, -- The originator of
|
|
-- the notification.
|
|
smfCfgAdminStatus -- The new status of the
|
|
-- SMF process.
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"smfCfgAdminStatusChange is a notification sent when
|
|
the 'smfCfgAdminStatus' object changes."
|
|
::= { smfMIBNotifObjects 1 }
|
|
|
|
smfNotifConfiguredOpModeChange NOTIFICATION-TYPE
|
|
OBJECTS { smfCfgRouterIDAddrType, -- The originator of
|
|
-- the notification.
|
|
smfCfgRouterID, -- The originator of
|
|
-- the notification.
|
|
smfCfgOperationalMode -- The new Operations
|
|
-- Mode of the SMF
|
|
-- process.
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"smfNotifConfiguredOpModeChange is a notification
|
|
sent when the 'smfCfgOperationalMode' object
|
|
changes."
|
|
::= { smfMIBNotifObjects 2 }
|
|
|
|
smfNotifIfAdminStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { smfCfgRouterIDAddrType, -- The originator of
|
|
-- the notification.
|
|
smfCfgRouterID, -- The originator of
|
|
-- the notification.
|
|
ifName, -- The interface whose
|
|
-- status has changed.
|
|
smfCfgIfAdminStatus -- The new status of the
|
|
-- SMF interface.
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"smfCfgIfAdminStatusChange is a notification sent when
|
|
the 'smfCfgIfAdminStatus' object changes."
|
|
::= { smfMIBNotifObjects 3 }
|
|
|
|
smfNotifDpdMemoryOverflowEvent NOTIFICATION-TYPE
|
|
OBJECTS { smfCfgRouterIDAddrType, -- The originator of
|
|
|
|
-- the notification.
|
|
smfCfgRouterID, -- The originator of
|
|
-- the notification.
|
|
smfStateDpdMemoryOverflow -- The counter of
|
|
-- the overflows.
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"smfNotifDpdMemoryOverflowEvents is sent when the
|
|
number of memory overflow events exceeds
|
|
the 'smfNotifDpdMemoryOverflowThreshold' within the
|
|
previous number of seconds defined by the
|
|
'smfNotifDpdMemoryOverflowWindow'."
|
|
::= { smfMIBNotifObjects 4 }
|
|
|
|
-- smfMIBNotifControl
|
|
smfNotifDpdMemoryOverflowThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
UNITS "Events"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold value for the
|
|
'smfNotifDpdmemoryOverflowEvents' object.
|
|
If the number of occurrences exceeds
|
|
this threshold within the previous
|
|
number of seconds
|
|
'smfNotifDpdMemoryOverflowWindow',
|
|
then the 'smfNotifDpdMemoryOverflowEvent'
|
|
notification is sent.
|
|
|
|
The default value for this object is
|
|
'1'."
|
|
DEFVAL { 1 }
|
|
::= { smfMIBNotifControl 1 }
|
|
|
|
smfNotifDpdMemoryOverflowWindow OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A time window value for the
|
|
'smfNotifDpdmemoryOverflowEvents' object.
|
|
If the number of occurrences exceeds
|
|
the 'smfNotifDpdMemoryOverflowThreshold'
|
|
within the previous number of seconds
|
|
'smfNotifDpdMemoryOverflowWindow',
|
|
then the 'smfNotifDpdMemoryOverflowEvent'
|
|
|
|
notification is sent.
|
|
|
|
The default value for this object is
|
|
'1'."
|
|
DEFVAL { 1 }
|
|
::= { smfMIBNotifControl 2 }
|
|
|
|
--
|
|
-- Compliance Statements
|
|
--
|
|
|
|
smfCompliances OBJECT IDENTIFIER ::= { smfMIBConformance 1 }
|
|
smfMIBGroups OBJECT IDENTIFIER ::= { smfMIBConformance 2 }
|
|
|
|
smfBasicCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The basic implementation requirements for
|
|
managed network entities that implement
|
|
the SMF RSSA process."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { smfCapabObjectsGroup,
|
|
smfConfigObjectsGroup }
|
|
::= { smfCompliances 1 }
|
|
|
|
smfFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The full implementation requirements for
|
|
managed network entities that implement
|
|
the SMF RSSA process."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { smfCapabObjectsGroup,
|
|
smfConfigObjectsGroup,
|
|
smfStateObjectsGroup,
|
|
smfPerfObjectsGroup,
|
|
smfNotifObjectsGroup,
|
|
smfNotificationsGroup
|
|
}
|
|
::= { smfCompliances 2 }
|
|
|
|
--
|
|
-- Units of Conformance
|
|
--
|
|
|
|
smfCapabObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
smfCapabilitiesOpModeID,
|
|
smfCapabilitiesRssaID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of SMF configuration objects implemented
|
|
in this module."
|
|
::= { smfMIBGroups 1 }
|
|
|
|
smfConfigObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
smfCfgAdminStatus,
|
|
smfCfgSmfSysUpTime,
|
|
smfCfgRouterIDAddrType,
|
|
smfCfgRouterID,
|
|
smfCfgOperationalMode,
|
|
smfCfgRssaMember,
|
|
smfCfgIpv4Dpd,
|
|
smfCfgIpv6Dpd,
|
|
smfCfgMaxPktLifetime,
|
|
smfCfgDpdEntryMaxLifetime,
|
|
smfCfgNhdpRssaMesgTLVIncluded,
|
|
smfCfgNhdpRssaAddrBlockTLVIncluded,
|
|
smfCfgAddrForwardingGroupName,
|
|
smfCfgAddrForwardingAddrType,
|
|
smfCfgAddrForwardingAddress,
|
|
smfCfgAddrForwardingAddrPrefixLength,
|
|
smfCfgAddrForwardingStatus,
|
|
smfCfgIfAdminStatus,
|
|
smfCfgIfSmfUpTime,
|
|
smfCfgIfRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of SMF configuration objects implemented
|
|
in this module."
|
|
::= { smfMIBGroups 2 }
|
|
|
|
smfStateObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
smfStateNodeRsStatusIncluded,
|
|
smfStateDpdMemoryOverflow,
|
|
smfStateNeighborRSSA,
|
|
smfStateNeighborNextHopInterface
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of SMF state objects implemented
|
|
|
|
in this module."
|
|
::= { smfMIBGroups 3 }
|
|
|
|
smfPerfObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
smfPerfIpv4MultiPktsRecvTotal,
|
|
smfPerfIpv4MultiPktsForwardedTotal,
|
|
smfPerfIpv4DuplMultiPktsDetectedTotal,
|
|
smfPerfIpv4DroppedMultiPktsTTLExceededTotal,
|
|
smfPerfIpv4TTLLargerThanPreviousTotal,
|
|
smfPerfIpv6MultiPktsRecvTotal,
|
|
smfPerfIpv6MultiPktsForwardedTotal,
|
|
smfPerfIpv6DuplMultiPktsDetectedTotal,
|
|
smfPerfIpv6DroppedMultiPktsTTLExceededTotal,
|
|
smfPerfIpv6TTLLargerThanPreviousTotal,
|
|
smfPerfIpv6HAVAssistsReqdTotal,
|
|
smfPerfIpv6DpdHeaderInsertionsTotal,
|
|
smfPerfIpv4MultiPktsRecvPerIf,
|
|
smfPerfIpv4MultiPktsForwardedPerIf,
|
|
smfPerfIpv4DuplMultiPktsDetectedPerIf,
|
|
smfPerfIpv4DroppedMultiPktsTTLExceededPerIf,
|
|
smfPerfIpv4TTLLargerThanPreviousPerIf,
|
|
smfPerfIpv6MultiPktsRecvPerIf,
|
|
smfPerfIpv6MultiPktsForwardedPerIf,
|
|
smfPerfIpv6DuplMultiPktsDetectedPerIf,
|
|
smfPerfIpv6DroppedMultiPktsTTLExceededPerIf,
|
|
smfPerfIpv6TTLLargerThanPreviousPerIf,
|
|
smfPerfIpv6HAVAssistsReqdPerIf,
|
|
smfPerfIpv6DpdHeaderInsertionsPerIf
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of SMF performance objects implemented
|
|
in this module by total and per interface."
|
|
::= { smfMIBGroups 4 }
|
|
|
|
smfNotifObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
smfNotifDpdMemoryOverflowThreshold,
|
|
smfNotifDpdMemoryOverflowWindow
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of SMF notification control
|
|
objects implemented in this module."
|
|
::= { smfMIBGroups 5 }
|
|
|
|
smfNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
smfNotifAdminStatusChange,
|
|
smfNotifConfiguredOpModeChange,
|
|
smfNotifIfAdminStatusChange,
|
|
smfNotifDpdMemoryOverflowEvent
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of SMF notifications implemented
|
|
in this module."
|
|
::= { smfMIBGroups 6 }
|
|
|
|
END
|