642 lines
22 KiB
Plaintext
642 lines
22 KiB
Plaintext
MPLS-LDP-FRAME-RELAY-STD-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE,
|
|
MODULE-IDENTITY,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI -- [RFC2578]
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF -- [RFC2580]
|
|
|
|
RowStatus,
|
|
StorageType
|
|
|
|
FROM SNMPv2-TC -- [RFC2579]
|
|
|
|
DLCI
|
|
FROM FRAME-RELAY-DTE-MIB -- [RFC2115]
|
|
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB -- [RFC2020]
|
|
|
|
mplsStdMIB
|
|
FROM MPLS-TC-STD-MIB -- [RFC3811]
|
|
|
|
mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex,
|
|
mplsLdpPeerLdpId
|
|
FROM MPLS-LDP-STD-MIB -- [RFC3813]
|
|
;
|
|
|
|
mplsLdpFrameRelayStdMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200406030000Z" -- June 3, 2004
|
|
ORGANIZATION "Multiprotocol Label Switching (mpls)
|
|
Working Group"
|
|
CONTACT-INFO
|
|
"Joan Cucchiara (jcucchiara@mindspring.com)
|
|
Marconi Communications, Inc.
|
|
|
|
Hans Sjostrand (hans@ipunplugged.com)
|
|
ipUnplugged
|
|
|
|
James V. Luciani (james_luciani@mindspring.com)
|
|
Marconi Communications, Inc.
|
|
|
|
Working Group Chairs:
|
|
George Swallow, email: swallow@cisco.com
|
|
Loa Andersson, email: loa@pi.se
|
|
|
|
MPLS Working Group, email: mpls@uu.net
|
|
"
|
|
DESCRIPTION
|
|
"Copyright (C) The Internet Society (year). The
|
|
initial version of this MIB module was published
|
|
in RFC 3815. For full legal notices see the RFC
|
|
itself or see:
|
|
http://www.ietf.org/copyrights/ianamib.html
|
|
|
|
This MIB contains managed object definitions for
|
|
configuring and monitoring the Multiprotocol Label
|
|
Switching (MPLS), Label Distribution Protocol (LDP),
|
|
utilizing Frame Relay as the Layer 2 media."
|
|
|
|
REVISION "200406030000Z" -- June 6, 2004
|
|
DESCRIPTION
|
|
"Initial version published as part of RFC 3815."
|
|
::= { mplsStdMIB 6 }
|
|
|
|
--****************************************************************
|
|
|
|
mplsLdpFrameRelayObjects OBJECT IDENTIFIER
|
|
::= { mplsLdpFrameRelayStdMIB 1 }
|
|
|
|
mplsLdpFrameRelayConformance OBJECT IDENTIFIER
|
|
::= { mplsLdpFrameRelayStdMIB 2 }
|
|
|
|
--****************************************************************
|
|
-- MPLS LDP Frame Relay Objects
|
|
--****************************************************************
|
|
|
|
--
|
|
-- Ldp Entity Objects for Frame Relay
|
|
--
|
|
|
|
mplsLdpEntityFrameRelayObjects OBJECT IDENTIFIER ::=
|
|
{ mplsLdpFrameRelayObjects 1 }
|
|
|
|
mplsLdpEntityFrameRelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLdpEntityFrameRelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains Frame Relay specific
|
|
information which could be used in the
|
|
'Optional Parameters' and other Frame Relay
|
|
specific information.
|
|
|
|
This table 'sparse augments' the mplsLdpEntityTable
|
|
when Frame Relay is the Layer 2 medium."
|
|
::= { mplsLdpEntityFrameRelayObjects 1 }
|
|
|
|
mplsLdpEntityFrameRelayEntry OBJECT-TYPE
|
|
SYNTAX MplsLdpEntityFrameRelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents the Frame Relay
|
|
optional parameters associated with the LDP entity."
|
|
INDEX { mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex
|
|
|
|
}
|
|
::= { mplsLdpEntityFrameRelayTable 1 }
|
|
|
|
MplsLdpEntityFrameRelayEntry ::= SEQUENCE {
|
|
mplsLdpEntityFrameRelayIfIndexOrZero InterfaceIndexOrZero,
|
|
mplsLdpEntityFrameRelayMergeCap INTEGER,
|
|
mplsLdpEntityFrameRelayLRComponents Unsigned32,
|
|
mplsLdpEntityFrameRelayVcDirectionality INTEGER,
|
|
mplsLdpEntityFrameRelayStorageType StorageType,
|
|
mplsLdpEntityFrameRelayRowStatus RowStatus
|
|
}
|
|
|
|
mplsLdpEntityFrameRelayIfIndexOrZero OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents either the InterfaceIndex of
|
|
the 'ifLayer' where the Frame Relay Labels 'owned' by this
|
|
entry were created, or 0 (zero). The value of zero
|
|
means that the InterfaceIndex is not known. For example,
|
|
if the InterfaceIndex is created subsequent to the
|
|
Frame Relay Label's creation, then it would not be known.
|
|
However, if the InterfaceIndex is known, then it must
|
|
be represented by this value.
|
|
|
|
If an InterfaceIndex becomes known, then the
|
|
network management entity (e.g., SNMP agent) responsible
|
|
for this object MUST change the value from 0 (zero) to the
|
|
value of the InterfaceIndex. If an Frame Relay Label is
|
|
being used in forwarding data, then the value of this
|
|
object MUST be the InterfaceIndex."
|
|
::= { mplsLdpEntityFrameRelayEntry 1 }
|
|
|
|
mplsLdpEntityFrameRelayMergeCap OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(0),
|
|
supported(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents whether or not the Frame Relay merge
|
|
capability is supported. This is the EXACT value for the
|
|
Frame Relay Session Parameter, field M (for Frame Relay
|
|
Merge Capabilities). The Frame Relay Session Parameter
|
|
is an optional parameter in the Initialization Message.
|
|
|
|
The description from rfc3036.txt is:
|
|
'M, Frame Relay Merge Capabilities
|
|
Specifies the merge capabilities of a Frame
|
|
Relay switch. The following values are
|
|
supported in this version of the
|
|
specification:
|
|
|
|
Value Meaning
|
|
|
|
0 Merge not supported
|
|
1 Merge supported
|
|
|
|
Non-merge and merge Frame Relay LSRs may
|
|
freely interoperate.'
|
|
|
|
Please refer to the following reference for a
|
|
complete description of this feature."
|
|
REFERENCE
|
|
"RFC3036, LDP Specification, Section 3.5.3
|
|
Initialization Message."
|
|
::= { mplsLdpEntityFrameRelayEntry 2 }
|
|
|
|
mplsLdpEntityFrameRelayLRComponents OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Label Range Components in the Initialization
|
|
message. This also represents the number of entries
|
|
in the mplsLdpEntityFrameRelayLRTable which correspond
|
|
to this entry.
|
|
|
|
This is the EXACT value for the Frame Relay Session
|
|
Parameter, field N (for Number of label range
|
|
components). The Frame Relay Session Parameter
|
|
is an optional parameter in the Initialization
|
|
Message.
|
|
|
|
The description from rfc3036.txt is:
|
|
|
|
'N, Number of label range components
|
|
Specifies the number of Frame Relay Label
|
|
Range Components included in the TLV.'
|
|
|
|
Please refer to the following reference for a
|
|
complete description of this feature."
|
|
REFERENCE
|
|
"RFC3036, LDP Specification, Section 3.5.3
|
|
|
|
Initialization Message."
|
|
::= { mplsLdpEntityFrameRelayEntry 3 }
|
|
|
|
mplsLdpEntityFrameRelayVcDirectionality OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bidirectional(0),
|
|
unidirection(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of this object is 'bidirectional(0)', then
|
|
the LSR supports the use of a given DLCI as a label for
|
|
both directions independently. If the value of
|
|
this object is 'unidirectional(1)', then the LSR
|
|
uses the given DLCI as a label in only one direction.
|
|
|
|
This is the EXACT value for the Frame Relay Session
|
|
Parameter, field D (for VC Directionality). The
|
|
Frame Relay Session Parameter is an optional
|
|
parameter in the Initialization Message.
|
|
|
|
The description from rfc3036.txt is:
|
|
|
|
'D, VC Directionality
|
|
A value of 0 specifies bidirectional VC capability,
|
|
meaning the LSR can support the use of a given
|
|
DLCI as a label for both link directions
|
|
independently. A value of 1 specifies
|
|
unidirectional VC capability, meaning a given
|
|
DLCI may appear in a label mapping for one
|
|
direction on the link only. When either or both
|
|
of the peers specifies unidirectional VC
|
|
capability, both LSRs use unidirectional VC
|
|
label assignment for the link as follows. The
|
|
LSRs compare their LDP Identifiers as unsigned
|
|
integers. The LSR with the larger LDP
|
|
Identifier may assign only odd-numbered DLCIs
|
|
in the range as labels. The system with the
|
|
smaller LDP Identifier may assign only
|
|
even-numbered DLCIs in the range as labels.'
|
|
|
|
Please refer to the following reference for a
|
|
complete description of this feature."
|
|
REFERENCE
|
|
"RFC3036, LDP Specification, Section 3.5.3
|
|
Initialization Message."
|
|
::= { mplsLdpEntityFrameRelayEntry 4 }
|
|
|
|
mplsLdpEntityFrameRelayStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent(4)'
|
|
need not allow write-access to any columnar
|
|
objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { mplsLdpEntityFrameRelayEntry 5 }
|
|
|
|
mplsLdpEntityFrameRelayRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row. All writable
|
|
objects in this row may be modified at any time,
|
|
however, as described in detail in the section
|
|
entitled, 'Changing Values After Session
|
|
Establishment', and again described in the
|
|
DESCRIPTION clause of the
|
|
mplsLdpEntityAdminStatus object,
|
|
if a session has been initiated with a Peer,
|
|
changing objects in this table will
|
|
wreak havoc with the session and interrupt
|
|
traffic. To repeat again:
|
|
the recommended procedure is to set the
|
|
mplsLdpEntityAdminStatus to
|
|
down, thereby explicitly causing a
|
|
session to be torn down. Then,
|
|
change objects in this entry, then set
|
|
the mplsLdpEntityAdminStatus
|
|
to enable which enables a new session
|
|
to be initiated."
|
|
::= { mplsLdpEntityFrameRelayEntry 6 }
|
|
|
|
--
|
|
-- Frame Relay Label Range Components
|
|
--
|
|
|
|
mplsLdpEntityFrameRelayLRTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLdpEntityFrameRelayLREntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about the
|
|
|
|
Optional Parameters for the Frame Relay Session
|
|
in the LDP Initialization Message, specifically
|
|
it contains information about the Frame Relay
|
|
Label Range Components.
|
|
|
|
If the value of the object
|
|
'mplsLdpEntityOptionalParameters' contains the
|
|
value of 'frameRelaySessionParameters(3)' then
|
|
there must be at least one corresponding entry
|
|
in this table."
|
|
::= { mplsLdpEntityFrameRelayObjects 2 }
|
|
|
|
mplsLdpEntityFrameRelayLREntry OBJECT-TYPE
|
|
SYNTAX MplsLdpEntityFrameRelayLREntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents the Frame Relay
|
|
Label Range Component associated with the LDP entity."
|
|
INDEX { mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex,
|
|
mplsLdpEntityFrameRelayLRMinDlci
|
|
}
|
|
::= { mplsLdpEntityFrameRelayLRTable 1 }
|
|
|
|
MplsLdpEntityFrameRelayLREntry ::= SEQUENCE {
|
|
mplsLdpEntityFrameRelayLRMinDlci DLCI,
|
|
mplsLdpEntityFrameRelayLRMaxDlci DLCI,
|
|
mplsLdpEntityFrameRelayLRLen INTEGER,
|
|
mplsLdpEntityFrameRelayLRStorageType StorageType,
|
|
mplsLdpEntityFrameRelayLRRowStatus RowStatus
|
|
}
|
|
|
|
mplsLdpEntityFrameRelayLRMinDlci OBJECT-TYPE
|
|
SYNTAX DLCI
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower bound which is supported. This value
|
|
should be the same as that in the Frame Relay Label
|
|
Range Component's Minimum DLCI field. The value
|
|
of zero is valid for the minimum DLCI field of
|
|
the label."
|
|
REFERENCE
|
|
"RFC3034, Use of Label Switching on Frame Relay
|
|
Networks Specification."
|
|
::= { mplsLdpEntityFrameRelayLREntry 1 }
|
|
|
|
mplsLdpEntityFrameRelayLRMaxDlci OBJECT-TYPE
|
|
SYNTAX DLCI
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper bound which is supported. This value
|
|
should be the same as that in the Frame Relay Label
|
|
Range Component's Maximum DLCI field."
|
|
::= { mplsLdpEntityFrameRelayLREntry 2 }
|
|
|
|
mplsLdpEntityFrameRelayLRLen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenDlciBits(0),
|
|
twentyThreeDlciBits(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the length of the DLCI bits.
|
|
|
|
This is the EXACT value for the Len field of the
|
|
Frame Relay Label Range Component.
|
|
|
|
The description from rfc3036.txt is:
|
|
|
|
'Len
|
|
This field specifies the number of bits of the DLCI.
|
|
The following values are supported:
|
|
|
|
Len DLCI bits
|
|
|
|
0 10
|
|
2 23
|
|
|
|
Len values 1 and 3 are reserved.'
|
|
|
|
Please refer to the following reference for a complete
|
|
description of this feature."
|
|
REFERENCE
|
|
"RFC3036, LDP Specification, Section 3.5.3
|
|
Initialization Message."
|
|
::= { mplsLdpEntityFrameRelayLREntry 3 }
|
|
|
|
mplsLdpEntityFrameRelayLRStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row.
|
|
Conceptual rows having the value 'permanent(4)'
|
|
need not allow write-access to any columnar
|
|
objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { mplsLdpEntityFrameRelayLREntry 4 }
|
|
|
|
mplsLdpEntityFrameRelayLRRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row. All writable
|
|
objects in this row may be modified at any time,
|
|
however, as described in detail in the section
|
|
entitled, 'Changing Values After Session
|
|
Establishment', and again described in the
|
|
DESCRIPTION clause of the
|
|
mplsLdpEntityAdminStatus object,
|
|
if a session has been initiated with a Peer,
|
|
changing objects in this table will
|
|
wreak havoc with the session and interrupt
|
|
traffic. To repeat again:
|
|
the recommended procedure is to set the
|
|
mplsLdpEntityAdminStatus to down, thereby
|
|
explicitly causing a session to be torn down. Then,
|
|
change objects in this entry, then set the
|
|
mplsLdpEntityAdminStatus to enable which enables
|
|
a new session to be initiated."
|
|
::= { mplsLdpEntityFrameRelayLREntry 5 }
|
|
|
|
--
|
|
-- MPLS LDP Frame Relay Session Information
|
|
--
|
|
|
|
mplsLdpFrameRelaySessionObjects OBJECT IDENTIFIER ::=
|
|
{ mplsLdpFrameRelayObjects 2 }
|
|
|
|
mplsLdpFrameRelaySessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsLdpFrameRelaySessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Frame Relay label range intersections
|
|
between the LDP Entities and LDP Peers.
|
|
Each row represents a single label range intersection.
|
|
|
|
NOTE: this table cannot use the 'AUGMENTS'
|
|
|
|
clause because there is not necessarily a one-to-one
|
|
mapping between this table and the
|
|
mplsLdpSessionTable."
|
|
::= { mplsLdpFrameRelaySessionObjects 1 }
|
|
|
|
mplsLdpFrameRelaySessionEntry OBJECT-TYPE
|
|
SYNTAX MplsLdpFrameRelaySessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents information on a
|
|
single label range intersection between an
|
|
LDP Entity and LDP Peer.
|
|
|
|
The information contained in a row is read-only."
|
|
INDEX { mplsLdpEntityLdpId,
|
|
mplsLdpEntityIndex,
|
|
mplsLdpPeerLdpId,
|
|
mplsLdpFrameRelaySessionMinDlci
|
|
}
|
|
::= { mplsLdpFrameRelaySessionTable 1 }
|
|
|
|
MplsLdpFrameRelaySessionEntry ::= SEQUENCE {
|
|
mplsLdpFrameRelaySessionMinDlci DLCI,
|
|
mplsLdpFrameRelaySessionMaxDlci DLCI,
|
|
mplsLdpFrameRelaySessionLen INTEGER
|
|
}
|
|
|
|
mplsLdpFrameRelaySessionMinDlci OBJECT-TYPE
|
|
SYNTAX DLCI
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower bound of DLCIs which are supported.
|
|
The value of zero is a valid value for the
|
|
minimum DLCI field of the label."
|
|
REFERENCE
|
|
"RFC3034, Use of Label Switching on Frame Relay
|
|
Networks Specification."
|
|
::= { mplsLdpFrameRelaySessionEntry 1 }
|
|
|
|
mplsLdpFrameRelaySessionMaxDlci OBJECT-TYPE
|
|
SYNTAX DLCI
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper bound of DLCIs which are supported."
|
|
::= { mplsLdpFrameRelaySessionEntry 2 }
|
|
|
|
mplsLdpFrameRelaySessionLen OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenDlciBits(0),
|
|
twentyThreeDlciBits(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the DLCI bits."
|
|
::= { mplsLdpFrameRelaySessionEntry 3 }
|
|
|
|
--****************************************************************
|
|
-- Module Conformance Statement
|
|
--****************************************************************
|
|
|
|
mplsLdpFrameRelayGroups
|
|
OBJECT IDENTIFIER ::= { mplsLdpFrameRelayConformance 1 }
|
|
|
|
mplsLdpFrameRelayCompliances
|
|
OBJECT IDENTIFIER ::= { mplsLdpFrameRelayConformance 2 }
|
|
|
|
--
|
|
-- Full Compliance
|
|
--
|
|
|
|
mplsLdpFrameRelayModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Module is implemented with support for
|
|
read-create and read-write. In other words,
|
|
both monitoring and configuration
|
|
are available when using this MODULE-COMPLIANCE."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
mplsLdpFrameRelayGroup
|
|
}
|
|
|
|
OBJECT mplsLdpEntityFrameRelayRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for createAndWait and notInService is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayLRRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION
|
|
"Support for createAndWait and notInService is not required."
|
|
::= { mplsLdpFrameRelayCompliances 1 }
|
|
|
|
--
|
|
-- Read-Only Compliance
|
|
--
|
|
|
|
mplsLdpFrameRelayModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Module is implemented with support for
|
|
read-only. In other words, only monitoring
|
|
is available by implementing this MODULE-COMPLIANCE."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
mplsLdpFrameRelayGroup
|
|
}
|
|
|
|
OBJECT mplsLdpEntityFrameRelayIfIndexOrZero
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayMergeCap
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayVcDirectionality
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and active is the
|
|
only status that needs to be supported."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayLRMaxDlci
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayLRLen
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayLRStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsLdpEntityFrameRelayLRRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and active is the
|
|
only status that needs to be supported."
|
|
::= { mplsLdpFrameRelayCompliances 2 }
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
|
|
mplsLdpFrameRelayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsLdpEntityFrameRelayIfIndexOrZero,
|
|
mplsLdpEntityFrameRelayMergeCap,
|
|
mplsLdpEntityFrameRelayLRComponents,
|
|
mplsLdpEntityFrameRelayVcDirectionality,
|
|
mplsLdpEntityFrameRelayStorageType,
|
|
mplsLdpEntityFrameRelayRowStatus,
|
|
mplsLdpEntityFrameRelayLRMaxDlci,
|
|
mplsLdpEntityFrameRelayLRLen,
|
|
mplsLdpEntityFrameRelayLRStorageType,
|
|
mplsLdpEntityFrameRelayLRRowStatus,
|
|
mplsLdpFrameRelaySessionMaxDlci,
|
|
mplsLdpFrameRelaySessionLen
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects that apply to all MPLS LDP implementations
|
|
using Frame Relay as the Layer 2."
|
|
::= { mplsLdpFrameRelayGroups 1 }
|
|
|
|
END
|