Observium_CE/mibs/rfc/LLDP-EXT-DOT1-PE-MIB

324 lines
11 KiB
Plaintext

LLDP-EXT-DOT1-PE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
TruthValue,
MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ifGeneralInformationGroup
FROM IF-MIB
lldpXdot1StandAloneExtensions
FROM LLDP-EXT-DOT1-EVB-EXTENSIONS-MIB
lldpV2Extensions,
lldpV2LocPortIfIndex,
lldpV2RemTimeMark,
lldpV2RemLocalIfIndex,
lldpV2RemLocalDestMACAddress,
lldpV2RemIndex,
lldpV2PortConfigEntry
FROM LLDP-V2-MIB;
lldpXDot1PEExtensions MODULE-IDENTITY
LAST-UPDATED "201201230000Z" -- January 23, 2012
ORGANIZATION "IEEE 802.1 Working Group"
CONTACT-INFO
"WG-URL: http://www.ieee802.org/1/
WG-EMail: stds-802-1-L@IEEE.ORG
Contact: Tony Jeffree
Postal: C/O IEEE 802.1 Working Group
IEEE Standards Association
445 Hoes Lane
Piscataway
NJ 08854
USA
E-mail: stds-802-1-L@IEEE.ORG"
DESCRIPTION
"The LLDP Management Information Base extension module for
IEEE 802.1 organizationally defined discovery information
to support Port Extension.
This MIB module is rooted under the
lldpXdot1StandAloneExtensions OID arc, in order to allow
it to be defined independently of other 802.1 LLDP
extension MIBs.
Unless otherwise indicated, the references in this
MIB module are to IEEE Std 802.1BR-2012.
Copyright (C) IEEE. This version of this MIB module
is published as Annex B.5 of IEEE Std 802.1BR-2012;
see the standard itself for full legal notices."
REVISION "201201230000Z" -- January 23, 2012
DESCRIPTION
"Initial version published as part of IEEE Std. 802.1BR-2012"
::= { lldpXdot1StandAloneExtensions 2 }
-----------------------------------------------------------------------
-----------------------------------------------------------------------
--
-- Organizationally Defined Information Extension - IEEE 802.1
-- Definitions to support Port Extension
-- peSet TLV set (IEEE Std 802.1Q Table D-1)
--
-----------------------------------------------------------------------
-----------------------------------------------------------------------
lldpXdot1PeMIB OBJECT IDENTIFIER
::= { lldpXDot1PEExtensions 1 }
lldpXdot1PeObjects OBJECT IDENTIFIER ::= { lldpXdot1PeMIB 1 }
-- Port Extension 802.1 MIB Extension groups
lldpXdot1PeConfig OBJECT IDENTIFIER ::= { lldpXdot1PeObjects 1 }
lldpXdot1PeLocalData OBJECT IDENTIFIER ::= { lldpXdot1PeObjects 2 }
lldpXdot1PeRemoteData OBJECT IDENTIFIER ::= { lldpXdot1PeObjects 3 }
-----------------------------------------------------------------------
-- IEEE 802.1 - Configuration for the peSet TLV set
-----------------------------------------------------------------------
--
-- lldpV2Xdot1PeConfigPortExtensionTable : configure the transmission
-- of the Port Extension TLVs on a set of ports.
--
lldpXdot1PeConfigPortExtensionTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1PeConfigPortExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP Port Extension
TLVs to be transmitted on individual ports."
::= { lldpXdot1PeConfig 1 }
lldpXdot1PeConfigPortExtensionEntry OBJECT-TYPE
SYNTAX LldpXdot1PeConfigPortExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies Port
Exension configuration.
This configuration object augments the
lldpV2Xdot1LocPortExtensionEntry, therefore it is
only present along with the associated
lldpV2Xdot1LocPortExtensionEntry entry.
Each active lldpV2Xdot1ConfigPortExensionEntry must be
restored from non-volatile storage (along with the
corresponding lldpV2Xdot1LocPortExtensionEntry) after a
re-initialization of the management system."
AUGMENTS { lldpV2PortConfigEntry }
::= { lldpXdot1PeConfigPortExtensionTable 1 }
LldpXdot1PeConfigPortExtensionEntry ::= SEQUENCE {
lldpXdot1PeConfigPortExtensionTxEnable TruthValue
}
lldpXdot1PeConfigPortExtensionTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXdot1PeConfigPortExtensionTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1
organizationally defined Port Extension TLV transmission
is allowed on a given LLDP transmission capable port.
The value of this object must be restored from
non-volatile storage after a re-initialization of the
management system."
REFERENCE
"D.8 of 802.1Q"
DEFVAL { true }
::= { lldpXdot1PeConfigPortExtensionEntry 1 }
------------------------------------------------------------------------
-- IEEE 802.1 - Port Extension Local System Information
------------------------------------------------------------------------
---
---
--- lldpXdot1PeLocPortExtensionTable: Port Extension Information Table
---
---
lldpXdot1PeLocPortExtensionTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1PeLocPortExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of Port Extension
information (as a part of the LLDP 802.1 organizational
extension) on the local system known to this agent."
::= { lldpXdot1PeLocalData 1 }
lldpXdot1PeLocPortExtensionEntry OBJECT-TYPE
SYNTAX LldpXdot1PeLocPortExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Extension information about a particular
Port Extender Port."
INDEX { lldpV2LocPortIfIndex }
::= { lldpXdot1PeLocPortExtensionTable 1 }
LldpXdot1PeLocPortExtensionEntry ::= SEQUENCE {
lldpXdot1PeLocPECascadePortPriority Unsigned32,
lldpXdot1PeLocPEAddress MacAddress,
lldpXdot1PeLocPECSPAddress MacAddress
}
lldpXdot1PeLocPECascadePortPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Contains the cascade port priority."
REFERENCE
"D.8"
::= { lldpXdot1PeLocPortExtensionEntry 1 }
lldpXdot1PeLocPEAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the MAC address that
uniquely identifies the Port Extender."
REFERENCE
"D.8"
::= { lldpXdot1PeLocPortExtensionEntry 2 }
lldpXdot1PeLocPECSPAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the MAC address to be used
for the Port Extension control and status protocol."
REFERENCE
"D.8"
::= { lldpXdot1PeLocPortExtensionEntry 3 }
------------------------------------------------------------------------
-- IEEE 802.1 - Port Extension Remote System Information
------------------------------------------------------------------------
---
---
--- lldpXdot1PeRemPortExtensionTable: Port Extension Information Table
---
---
lldpXdot1PeRemPortExtensionTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1PeRemPortExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Port Extension information
(as a part of the LLDP IEEE 802.1 organizational extension)
of the remote system."
::= { lldpXdot1PeRemoteData 1 }
lldpXdot1PeRemPortExtensionEntry OBJECT-TYPE
SYNTAX LldpXdot1PeRemPortExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Extension information about remote systems port
component."
INDEX { lldpV2RemTimeMark,
lldpV2RemLocalIfIndex,
lldpV2RemLocalDestMACAddress,
lldpV2RemIndex }
::= { lldpXdot1PeRemPortExtensionTable 1 }
LldpXdot1PeRemPortExtensionEntry ::= SEQUENCE {
lldpXdot1PeRemPECascadePortPriority Unsigned32,
lldpXdot1PeRemPEAddress MacAddress,
lldpXdot1PeRemPECSPAddress MacAddress
}
lldpXdot1PeRemPECascadePortPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cascade port priority."
REFERENCE
"D.8"
::= { lldpXdot1PeRemPortExtensionEntry 1 }
lldpXdot1PeRemPEAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the MAC address that
uniquely identifies the Port Extender."
REFERENCE
"D.8"
::= { lldpXdot1PeRemPortExtensionEntry 2 }
lldpXdot1PeRemPECSPAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the MAC address to be used
for the Port Extension Control and Status Protocol."
REFERENCE
"D.8"
::= { lldpXdot1PeRemPortExtensionEntry 3 }
------------------------------------------------------------------------
-- IEEE 802.1 - Port Extension Conformance Information
------------------------------------------------------------------------
lldpXdot1PeConformance OBJECT IDENTIFIER ::= { lldpXDot1PEExtensions 2 }
lldpXdot1PeCompliances
OBJECT IDENTIFIER ::= { lldpXdot1PeConformance 1 }
lldpXdot1PeGroups OBJECT IDENTIFIER ::= { lldpXdot1PeConformance 2 }
--
-- Port Extension - Compliance Statements
--
lldpXdot1PeCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"A compliance statement for entities that implement
the IEEE 802.1 organizationally defined Port Extension
LLDP extension MIB.
This group is mandatory for agents that implement the
Port Extension peSet TLV set."
MODULE -- this module
MANDATORY-GROUPS { lldpXdot1PeGroup,
ifGeneralInformationGroup }
::= { lldpXdot1PeCompliances 1 }
--
-- Port Extension - MIB groupings
--
lldpXdot1PeGroup OBJECT-GROUP
OBJECTS {
lldpXdot1PeConfigPortExtensionTxEnable,
lldpXdot1PeLocPECascadePortPriority,
lldpXdot1PeLocPEAddress,
lldpXdot1PeLocPECSPAddress,
lldpXdot1PeRemPECascadePortPriority,
lldpXdot1PeRemPEAddress,
lldpXdot1PeRemPECSPAddress
}
STATUS current
DESCRIPTION
"The collection of objects that support the
Port Extension peSet TLV set."
::= { lldpXdot1PeGroups 1 }
END