WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/redlionram/RED-LION-RAM-MIB

1564 lines
45 KiB
Plaintext
Raw Permalink Blame History

RED-LION-RAM-MIB DEFINITIONS ::= BEGIN
-- INITIAL REQUIREMENTS:
-- RSSI /signal strength/Health of Cellular connectivity (Supported in new RED-LION-WIRELESS-MIB)
-- Health of internal components of device including:
-- power supply, (UNSUPPORTED)
-- temperature, (UNSUPPORTED)
-- Ethernet, (via MIB-II.interface.ifTable.<ifIndex>.ifAdminStatus)
-- cellular radio (via new RED-LION-WIRELESS-MIB::currentState or Activated)
-- Status of
-- VRRP, (via RED-LION-RAM-MIB::system.vrrp.*)
-- Ethernet, (via MIB-II.interface.ifTable.<ifIndex>.ifAdminStatus)
-- link state (via MIB-II.interface.ifTable.<ifIndex>.ifAdminStatus)
-- throughput information on active interfaces (MIB-II?)
-- Location information and serial numbers for inventory control (Defined in config, accessible via MIB-II)
IMPORTS
enterprises FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB;
redlionram OBJECT IDENTIFIER ::= {enterprises 1890}
system OBJECT IDENTIFIER ::= {redlionram 1} -- Unit Information as Leaves. Sub-Systems (as defined in config.xml as branches)
unitInfo OBJECT IDENTIFIER ::= {system 1}
cellular OBJECT IDENTIFIER ::= {system 2}
trafficppp0 OBJECT IDENTIFIER ::= {system 3}
trafficwwan0 OBJECT IDENTIFIER ::= {system 4}
trafficeth0 OBJECT IDENTIFIER ::= {system 5}
trafficeth1 OBJECT IDENTIFIER ::= {system 6}
gpscurrent OBJECT IDENTIFIER ::= {system 7}
unitDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Model Name (e.g. SN6600). DEFAULT: UNKNOWN"
::= {unitInfo 1}
unitSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Serial Number (e.g. 6621-2517560325). DEFAULT: UNKNOWN"
::= {unitInfo 2}
unitFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Firmware Version Number (e.g. v3.04rc33). DEFAULT: UNKNOWN"
::= {unitInfo 3}
unitName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unit Name (e.g. RAM-0647e3 or User Prefered Name via GUI Access Settings). DEFAULT: UNKNOWN"
::= {unitInfo 4}
mdn OBJECT-TYPE -- CELLMODEM_MDN=3144973013
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Mobile Directory Number (e.g. (xxx)xxx-xxxx). DEFAULT: UNKNOWN"
::= {cellular 1}
minIMEI OBJECT-TYPE -- CELLMODEM_MIN_IMEI=3148530409
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Intl Mobile Equipment Identifier DEFAULT: UNKNOWN"
::= {cellular 2}
nai OBJECT-TYPE -- CELLMODEM_NAI=redlionram05@sprintpcs.com
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Network Acces Identifier. DEFAULT: UNKNOWN"
::= {cellular 3}
sipUser OBJECT-TYPE -- CELLMODEM_SIPUSER=0
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Session Initiation Protocol User. DEFAULT: -1"
::= {cellular 4}
sid OBJECT-TYPE -- CELLMODEM_SID=4139
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular System ID. DEFAULT: -1"
::= {cellular 5}
nid OBJECT-TYPE -- CELLMODEM_NID=65535
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Network Identifier. DEFAULT: -1"
::= {cellular 6}
prl OBJECT-TYPE -- CELLMODEM_PRL_VERSION=60754
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Preferred Roaming List. DEFAULT: -1"
::= {cellular 7}
activated OBJECT-TYPE -- CELLMODEM_CARD_ACTIVATED=yes
SYNTAX INTEGER -- {unknown(-1), no(0), yes(1)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular module activation status. DEFAULT: -1"
::= {cellular 8}
omaSupported OBJECT-TYPE -- CELLMODEM_OMA_SUPPORTED=yes
SYNTAX INTEGER -- {unknown(-1), no(0), yes(1)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular OMA Supported status. DEFAULT: -1"
::= {cellular 9}
currentMipProfile OBJECT-TYPE -- CELLMODEM_CURRENT_MIP_PROFILE=1
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Mobile IP Profile. DEFAULT: -1"
::= {cellular 10}
esn OBJECT-TYPE -- CELLMODEM_ESN=60A12A55
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module Electronic Serial Number. DEFAULT: UNKNOWN"
::= {cellular 11}
pesn OBJECT-TYPE -- CELLMODEM_PESN=A5CB0001
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module Pseudo ESN. DEFAULT: UNKNOWN"
::= {cellular 12}
meid OBJECT-TYPE -- CELLMODEM_MEID=4D7-25D280D9
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Mobile Equipment Identifier. DEFAULT: UNKNOWN"
::= {cellular 13}
vendor OBJECT-TYPE -- CELLMODEM_MANU=Sierra Wireless
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module manufacturer. DEFAULT: UNKNOWN"
::= {cellular 14}
modelName OBJECT-TYPE -- CELLMODEM_MODEL=sierra598U
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vendor-provided model name of the modem/card/module (e.g. sierra598U). DEFAULT: UNKNOWN"
::= {cellular 15}
fwVersion OBJECT-TYPE -- CELLMODEM_FIRMWARE_V=p2511202
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module Firmware version #. DEFAULT: UNKNOWN"
::= {cellular 16}
hwVersion OBJECT-TYPE -- CELLMODEM_HARDWARE_V=T598 Rev 1.0
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module hardware version #. DEFAULT: UNKNOWN"
::= {cellular 17}
carrier OBJECT-TYPE -- CELLMODEM_CARRIER=Sprint
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Service Provider. DEFAULT: UNKNOWN"
::= {cellular 18}
lowRssi OBJECT-TYPE -- CELLMODEM_LOWSPEED_RSSI=73
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Low Speed received signal strenth indication. DEFAULT: 0"
::= {cellular 19}
lowEcio OBJECT-TYPE -- CELLMODEM_LOWSPEED_ECIO=9
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Low Speed EC/IO. DEFAULT: 0"
::= {cellular 20}
highRssi OBJECT-TYPE -- CELLMODEM_HIGHSPEED_RSSI=73
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular High Speed received signal strenth indication. DEFAULT: 0"
::= {cellular 21}
highEcio OBJECT-TYPE -- CELLMODEM_HIGHSPEED_ECIO=8
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular High Speed EC/IO. DEFAULT: 0"
::= {cellular 22}
currentRssi OBJECT-TYPE -- CELLMODEM_CURRENT_RSSI=73
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Current Received Signal Strenth Indication. DEFAULT: 0"
::= {cellular 23}
currentEcio OBJECT-TYPE -- CELLMODEM_CURRENT_ECIO=8
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Current EC/IO. DEFAULT: 0"
::= {cellular 24}
svcType OBJECT-TYPE -- CELLMODEM_SERVICE_TYPE=EVDO REV: A
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Service Type. DEFAULT: UNKNOWN"
::= {cellular 25}
currentChannel OBJECT-TYPE -- CELLMODEM_CURRENT_CHAN=625
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Channel. DEFAULT: -1"
::= {cellular 29}
cdmaType OBJECT-TYPE -- CELLMODEM_CDMA_TYPE=Digital
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular CDMA Type (e.g. None, Analog, Digital). DEFAULT: UNKNOWN"
::= {cellular 30}
hdrType OBJECT-TYPE -- CELLMODEM_HDR_TYPE=RevA
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular HDR (e.g. Unknown, None, Rev0, RevA). DEFAULT: UNKNOWN"
::= {cellular 31}
cdmaRoaming OBJECT-TYPE -- CELLMODEM_CDMA_ROAMING=Home
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Roaming indicator - CDMA. DEFAULT: UNKNOWN"
::= {cellular 32}
hdrRoaming OBJECT-TYPE -- CELLMODEM_HDR_ROAMING=None
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Roaming indicator - EVDO. DEFAULT: UNKNOWN"
::= {cellular 33}
roaming OBJECT-TYPE -- CELLMODEM_ROAMING=0
SYNTAX INTEGER -- {unknown(-1), no(0), yes(1)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular current roaming status. DEFAULT: -1"
::= {cellular 34}
currentState OBJECT-TYPE -- CELLMODEM_CURRENT_STATE=Connected
SYNTAX INTEGER -- {unknown(-1), disconnected(0), connected(1)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular state (e.g. connecting, dormant, connected, disconnected, error, callincoming). DEFAULT: -1"
::= {cellular 35}
speedPref OBJECT-TYPE -- CELLMODEM_SPEEDPREF=Automatic
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module speed pref. DEFAULT: UNKNOWN"
::= {cellular 36}
roamPref OBJECT-TYPE -- CELLMODEM_ROAMPREF=HomePreferred - AUTO
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module roaming pref. DEFAULT: UNKNOWN"
::= {cellular 37}
devName OBJECT-TYPE -- the /dev/name
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device name as presented by the operating system (e.g. /dev/ttyUSB0). DEFAULT: UNKNOWN"
::= {cellular 38}
ifName OBJECT-TYPE -- the ifEntry name
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cellular interface name, if known, as presented by the operating system (e.g. ppp0). DEFAULT: UNKNOWN"
::= {cellular 39}
txCount OBJECT-TYPE -- transmitted bytes
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module TX Byte Count, updated every 30 mins. DEFAULT: -1"
::= {cellular 40}
rxCount OBJECT-TYPE -- received bytes
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module RX Byte Count, updated every 30 mins.. DEFAULT: -1"
::= {cellular 41}
gprsState OBJECT-TYPE -- CELLMODEM_GPRS_STATE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular GPRS State. DEFAULT: UNKNOWN"
::= {cellular 42}
rxLevel OBJECT-TYPE -- CELLMODEM_RX_LEVEL
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular RX Level. DEFAULT: UNKNOWN"
::= {cellular 43}
servingCell OBJECT-TYPE -- CELLMODEM_SERVING_CELL
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Serving Cell. DEFAULT: UNKNOWN"
::= {cellular 44}
rccState OBJECT-TYPE -- CELLMODEM_RCC_STATE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular RCC State. DEFAULT: UNKNOWN"
::= {cellular 45}
gsmChannel OBJECT-TYPE -- CELLMODEM_GSM_CHANNEL
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular GSM Channel. DEFAULT: UNKNOWN"
::= {cellular 46}
psState OBJECT-TYPE -- CELLMODEM_PS_STATE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular PS State. DEFAULT: UNKNOWN"
::= {cellular 47}
mode OBJECT-TYPE -- CELLMODEM_MODE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Mode. DEFAULT: UNKNOWN"
::= {cellular 48}
temperature OBJECT-TYPE -- CELLMODEM_TEMPRATURE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Module Temp (not available on all modules). DEFAULT: UNKNOWN"
::= {cellular 49}
simContextApn0 OBJECT-TYPE -- CELLMODEM_SIM_CONT_APN0
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular SIM APN 0. DEFAULT: UNKNOWN"
::= {cellular 50}
simContextApn1 OBJECT-TYPE -- CELLMODEM_SIM_CONT_APN1
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular SIM APN 1. DEFAULT: UNKNOWN"
::= {cellular 51}
simStatus OBJECT-TYPE -- CELLMODEM_SIM_STATUS
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular SIM Status. DEFAULT: UNKNOWN"
::= {cellular 52}
serviceDomain OBJECT-TYPE -- CELLMODEM_SERVICE_DOMAIN
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Service Domain. DEFAULT: UNKNOWN"
::= {cellular 53}
availServiceType OBJECT-TYPE -- CELLMODEM_AVAIL_SERVICE_TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Available Service Type. DEFAULT: UNKNOWN"
::= {cellular 54}
wCdmaL1State OBJECT-TYPE -- CELLMODEM_WCDMA_L1_STATE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular WCDMA L1 State. DEFAULT: UNKNOWN"
::= {cellular 55}
mmcsState OBJECT-TYPE -- CELLMODEM_MM_CS_STATE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular MM CS State. DEFAULT: UNKNOWN"
::= {cellular 56}
gmmPsState OBJECT-TYPE -- CELLMODEM_GMM_PS_STATE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular GMM PS State. DEFAULT: UNKNOWN"
::= {cellular 57}
wCdmaChannel OBJECT-TYPE -- CELLMODEM_WCDMA_CHANNEL
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular WCDMA Channel. DEFAULT: UNKNOWN"
::= {cellular 58}
wCdmaBand OBJECT-TYPE -- CELLMODEM_WCDMA_BAND
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular WCDMA Band. DEFAULT: UNKNOWN"
::= {cellular 59}
systemMode OBJECT-TYPE -- CELLMODEM_SYSTEM_MODE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular System Mode. DEFAULT: UNKNOWN"
::= {cellular 60}
powerOnTime OBJECT-TYPE -- CELLMODEM_POWERON_TIME
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Power On Time. DEFAULT: UNKNOWN"
::= {cellular 61}
lowSpeedCsq OBJECT-TYPE -- CELLMODEM_LOWSPEED_CSQ
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Low Speed CSQ. DEFAULT: UNKNOWN"
::= {cellular 62}
highSpeedCsq OBJECT-TYPE -- CELLMODEM_HIGHSPEED_CSQ
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular High Speed CSQ. DEFAULT: UNKNOWN"
::= {cellular 63}
band OBJECT-TYPE -- CELLMODEM_BAND
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Band. DEFAULT: UNKNOWN"
::= {cellular 64}
imei OBJECT-TYPE -- CELLMODEM_IMEI
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular IMEI. DEFAULT: UNKNOWN"
::= {cellular 65}
simId OBJECT-TYPE -- CELLMODEM_SIM_ID
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular SIM ID. DEFAULT: UNKNOWN"
::= {cellular 66}
carrPLMN OBJECT-TYPE -- CELLMODEM_CARRIER_PLMN=123456
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Carrier PLMN... DEFAULT: UNKNOWN"
::= {cellular 67}
rxLevelC0 OBJECT-TYPE -- CELLMODEM_RX_LEVEL_C0=:-62
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Receive Level C0... DEFAULT: UNKNOWN"
::= {cellular 68}
rxLevelC1 OBJECT-TYPE -- CELLMODEM_RX_LEVEL_C1=:-106
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Receive Level C1... DEFAULT: UNKNOWN"
::= {cellular 69}
locAreaCode OBJECT-TYPE -- CELLMODEM_LOCATION_AREA_CODE=5FB7 (24503)
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Location Area Code... DEFAULT: UNKNOWN"
::= {cellular 70}
lteBand OBJECT-TYPE -- CELLMODEM_LTE_BAND=B17
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Band... DEFAULT: UNKNOWN"
::= {cellular 71}
lteRxChan OBJECT-TYPE -- CELLMODEM_LTE_RX_CHAN=5780
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Receive Channel... DEFAULT: UNKNOWN"
::= {cellular 72}
lteTxChan OBJECT-TYPE -- CELLMODEM_LTE_TX_CHAN=65535
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Transmit Channel... DEFAULT: UNKNOWN"
::= {cellular 73}
lteBW OBJECT-TYPE -- CELLMODEM_LTE_BW=10MHZ
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Bandwidth... DEFAULT: UNKNOWN"
::= {cellular 74}
lteRSRP OBJECT-TYPE -- CELLMODEM_LTE_RSRP=-89
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Reference Signal Received Power... DEFAULT: UNKNOWN"
::= {cellular 75}
lteRSRQ OBJECT-TYPE -- CELLMODEM_LTE_RSRQ=-8
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Reference Signal Received Quality... DEFAULT: UNKNOWN"
::= {cellular 76}
lteTracAreaCode OBJECT-TYPE -- CELLMODEM_LTE_TRAC_AREA_CODE=6709 (26377)
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Trac Area Code... DEFAULT: UNKNOWN"
::= {cellular 77}
creg OBJECT-TYPE -- CELLMODEM_CREG=Not registered, Searching
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellmodem CREG Not registered, Searching... DEFAULT: UNKNOWN"
::= {cellular 78}
cellularUpTime OBJECT-TYPE -- Cellular Up Time in Seconds
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cellular Up Time in Seconds, DEFAULT: -1"
::= {cellular 79}
lteRSRPint OBJECT-TYPE -- CELLMODEM_LTE_RSRPint=-106
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Reference Signal Received Power in Integer... DEFAULT: -1"
::= {cellular 80}
lteRSRQint OBJECT-TYPE -- CELLMODEM_LTE_RSRQint=-11
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Reference Signal Received Quality in Integer... DEFAULT: -1"
::= {cellular 81}
lteSINRint OBJECT-TYPE -- CELLMODEM_LTE_SINRint=6
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LTE Signal to Interference Plus Noise Ratio in Integer... DEFAULT: -1"
::= {cellular 82}
todayRxPpp0 OBJECT-TYPE -- Vnstat Today Rx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 1}
todayTxPpp0 OBJECT-TYPE -- Vnstat Today Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 2}
todayTotalPpp0 OBJECT-TYPE -- Vnstat Today Total Rx/Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 3}
yesterdayRxPpp0 OBJECT-TYPE -- Vnstat Yesterday Rx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 4}
yesterdayTxPpp0 OBJECT-TYPE -- Vnstat Yesterday Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 5}
yesterdayTotalPpp0 OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 6}
currMonthRxPpp0 OBJECT-TYPE -- Vnstat Current Month Rx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 7}
currMonthTxPpp0 OBJECT-TYPE -- Vnstat Current Month Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 8}
currMonthTotalPpp0 OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 9}
preMonthRxPpp0 OBJECT-TYPE -- Vnstat Previous Month Rx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 10}
preMonthTxPpp0 OBJECT-TYPE -- Vnstat Previous Month Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 11}
preMonthTotalPpp0 OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for PPP0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN"
::= {trafficppp0 12}
todayRxPpp0Kib OBJECT-TYPE -- Vnstat Today Rx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 13}
todayTxPpp0Kib OBJECT-TYPE -- Vnstat Today Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 14}
todayTotalPpp0Kib OBJECT-TYPE -- Vnstat Today Total Rx/Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 15}
yesterdayRxPpp0Kib OBJECT-TYPE -- Vnstat Yesterday Rx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 16}
yesterdayTxPpp0Kib OBJECT-TYPE -- Vnstat Yesterday Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 17}
yesterdayTotalPpp0Kib OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 18}
currMonthRxPpp0Kib OBJECT-TYPE -- Vnstat Current Month Rx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 19}
currMonthTxPpp0Kib OBJECT-TYPE -- Vnstat Current Month Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 20}
currMonthTotalPpp0Kib OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 21}
preMonthRxPpp0Kib OBJECT-TYPE -- Vnstat Previous Month Rx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 22}
preMonthTxPpp0Kib OBJECT-TYPE -- Vnstat Previous Month Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 23}
preMonthTotalPpp0Kib OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for PPP0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1"
::= {trafficppp0 24}
todayRxWwan0 OBJECT-TYPE -- Vnstat Today Rx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 1}
todayTxWwan0 OBJECT-TYPE -- Vnstat Today Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 2}
todayTotalWwan0 OBJECT-TYPE -- Vnstat Today Total Rx/Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 3}
yesterdayRxWwan0 OBJECT-TYPE -- Vnstat Yesterday Rx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 4}
yesterdayTxWwan0 OBJECT-TYPE -- Vnstat Yesterday Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 5}
yesterdayTotalWwan0 OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 6}
currMonthRxWwan0 OBJECT-TYPE -- Vnstat Current Month Rx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 7}
currMonthTxWwan0 OBJECT-TYPE -- Vnstat Current Month Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 8}
currMonthTotalWwan0 OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 9}
preMonthRxWwan0 OBJECT-TYPE -- Vnstat Previous Month Rx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 10}
preMonthTxWwan0 OBJECT-TYPE -- Vnstat Previous Month Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 11}
preMonthTotalWwan0 OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for WWAN0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN"
::= {trafficwwan0 12}
todayRxWwan0Kib OBJECT-TYPE -- Vnstat Today Rx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 13}
todayTxWwan0Kib OBJECT-TYPE -- Vnstat Today Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 14}
todayTotalWwan0Kib OBJECT-TYPE -- Vnstat Today Total Rx/Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 15}
yesterdayRxWwan0Kib OBJECT-TYPE -- Vnstat Yesterday Rx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 16}
yesterdayTxWwan0Kib OBJECT-TYPE -- Vnstat Yesterday Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 17}
yesterdayTotalWwan0Kib OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 18}
currMonthRxWwan0Kib OBJECT-TYPE -- Vnstat Current Month Rx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 19}
currMonthTxWwan0Kib OBJECT-TYPE -- Vnstat Current Month Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 20}
currMonthTotalWwan0Kib OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 21}
preMonthRxWwan0Kib OBJECT-TYPE -- Vnstat Previous Month Rx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 22}
preMonthTxWwan0Kib OBJECT-TYPE -- Vnstat Previous Month Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 23}
preMonthTotalWwan0Kib OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for WWAN0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1"
::= {trafficwwan0 24}
todayRxEth0 OBJECT-TYPE -- Vnstat Today Rx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 1}
todayTxEth0 OBJECT-TYPE -- Vnstat Today Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 2}
todayTotalEth0 OBJECT-TYPE -- Vnstat Today Total Rx/Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 3}
yesterdayRxEth0 OBJECT-TYPE -- Vnstat Yesterday Rx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 4}
yesterdayTxEth0 OBJECT-TYPE -- Vnstat Yesterday Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 5}
yesterdayTotalEth0 OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 6}
currMonthRxEth0 OBJECT-TYPE -- Vnstat Current Month Rx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 7}
currMonthTxEth0 OBJECT-TYPE -- Vnstat Current Month Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 8}
currMonthTotalEth0 OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 9}
preMonthRxEth0 OBJECT-TYPE -- Vnstat Previous Month Rx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 10}
preMonthTxEth0 OBJECT-TYPE -- Vnstat Previous Month Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 11}
preMonthTotalEth0 OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for Eth0 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN"
::= {trafficeth0 12}
todayRxEth0Kib OBJECT-TYPE -- Vnstat Today Rx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 13}
todayTxEth0Kib OBJECT-TYPE -- Vnstat Today Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 14}
todayTotalEth0Kib OBJECT-TYPE -- Vnstat Today Total Rx/Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 15}
yesterdayRxEth0Kib OBJECT-TYPE -- Vnstat Yesterday Rx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 16}
yesterdayTxEth0Kib OBJECT-TYPE -- Vnstat Yesterday Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 17}
yesterdayTotalEth0Kib OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 18}
currMonthRxEth0Kib OBJECT-TYPE -- Vnstat Current Month Rx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 19}
currMonthTxEth0Kib OBJECT-TYPE -- Vnstat Current Month Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 20}
currMonthTotalEth0Kib OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 21}
preMonthRxEth0Kib OBJECT-TYPE -- Vnstat Previous Month Rx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 22}
preMonthTxEth0Kib OBJECT-TYPE -- Vnstat Previous Month Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 23}
preMonthTotalEth0Kib OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for ETH0 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1"
::= {trafficeth0 24}
todayRxEth1 OBJECT-TYPE -- Vnstat Today Rx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 1}
todayTxEth1 OBJECT-TYPE -- Vnstat Today Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 2}
todayTotalEth1 OBJECT-TYPE -- Vnstat Today Total Rx/Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 3}
yesterdayRxEth1 OBJECT-TYPE -- Vnstat Yesterday Rx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 4}
yesterdayTxEth1 OBJECT-TYPE -- Vnstat Yesterday Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 5}
yesterdayTotalEth1 OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 6}
currMonthRxEth1 OBJECT-TYPE -- Vnstat Current Month Rx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 7}
currMonthTxEth1 OBJECT-TYPE -- Vnstat Current Month Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 8}
currMonthTotalEth1 OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 9}
preMonthRxEth1 OBJECT-TYPE -- Vnstat Previous Month Rx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 10}
preMonthTxEth1 OBJECT-TYPE -- Vnstat Previous Month Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 11}
preMonthTotalEth1 OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for Eth1 Interface
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN"
::= {trafficeth1 12}
todayRxEth1Kib OBJECT-TYPE -- Vnstat Today Rx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Rx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 13}
todayTxEth1Kib OBJECT-TYPE -- Vnstat Today Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 14}
todayTotalEth1Kib OBJECT-TYPE -- Vnstat Today Total Rx/Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Today Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 15}
yesterdayRxEth1Kib OBJECT-TYPE -- Vnstat Yesterday Rx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Rx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 16}
yesterdayTxEth1Kib OBJECT-TYPE -- Vnstat Yesterday Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 17}
yesterdayTotalEth1Kib OBJECT-TYPE -- Vnstat Yesterday Total Rx/Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Yesterday Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 18}
currMonthRxEth1Kib OBJECT-TYPE -- Vnstat Current Month Rx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Rx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 19}
currMonthTxEth1Kib OBJECT-TYPE -- Vnstat Current Month Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 20}
currMonthTotalEth1Kib OBJECT-TYPE -- Vnstat Current Month Total Rx/Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Current Month Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 21}
preMonthRxEth1Kib OBJECT-TYPE -- Vnstat Previous Month Rx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Rx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 22}
preMonthTxEth1Kib OBJECT-TYPE -- Vnstat Previous Month Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 23}
preMonthTotalEth1Kib OBJECT-TYPE -- Vnstat Previous Month Total Rx/Tx for ETH1 Interface in Kib
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vnstat Previous Month Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1"
::= {trafficeth1 24}
currentGpsValid OBJECT-TYPE -- GPS Fixed Quality
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Valid Fixed Quality (0 = Invalid, 1 = Valid)... DEFAULT: UNKNOWN"
::= {gpscurrent 1}
currentGpsLat OBJECT-TYPE -- GPS Latitude Degrees
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Latitude Degrees ... DEFAULT: UNKNOWN"
::= {gpscurrent 2}
currentGpsLong OBJECT-TYPE -- GPS Longitude Degrees
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Longitude Degrees ... DEFAULT: UNKNOWN"
::= {gpscurrent 3}
currentGpsAlt OBJECT-TYPE -- GPS Altitude Tenths of Meter
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Altitude Tenths of Meter(280.2 = 2802) ... DEFAULT: UNKNOWN"
::= {gpscurrent 4}
currentGpsTimeStamp OBJECT-TYPE -- GPS Time Stamp
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Time Stamp ... DEFAULT: UNKNOWN"
::= {gpscurrent 5}
currentGpsNumSat OBJECT-TYPE -- GPS Number of Satellites
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Number of Satellites ... DEFAULT: UNKNOWN"
::= {gpscurrent 6}
currentGpsFtfromcp OBJECT-TYPE -- GPS Feet From Lockdown Center Point
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Feet From Lockdown Center Point ... DEFAULT: UNKNOWN"
::= {gpscurrent 7}
currentGpsSpeed OBJECT-TYPE -- GPS Speed
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Speed, SOG tenths of knots (50.1 = 501)... DEFAULT: UNKNOWN"
::= {gpscurrent 8}
currentGpsCourse OBJECT-TYPE -- GPS Course, Heading in tenths of degree
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Course, Heading in tenths of degree(280.3 = 2803)... DEFAULT: UNKNOWN"
::= {gpscurrent 9}
gpsSource OBJECT-TYPE -- GPS Source of Data
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Source of Data (1=Internal; 3=Fixed)... DEFAULT: UNKNOWN"
::= {gpscurrent 10}
gpsLockdownState OBJECT-TYPE -- GPS Heading in Tenths of Degree
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Lockdown State (0 = Monitor; 5 = Lockdown; 7-9 = Violation)... DEFAULT: UNKNOWN"
::= {gpscurrent 11}
gpsLockdownRadius OBJECT-TYPE -- GPS Lockdown Radius (ft)
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"GPS Current Lockdown Radius (ft), Units in Feet as calculated from centerpoint... DEFAULT: UNKNOWN"
::= {gpscurrent 12}
END
View Git Blame Copy Permalink