WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/raisecom/RAISECOM-DOT1AG-MIB

2903 lines
97 KiB
Plaintext
Raw Permalink Blame History

--MibName=rcDot1ag
RAISECOM-DOT1AG-MIB DEFINITIONS ::= BEGIN
-- ******************************************************************
-- IEEE P802.1ag(TM) CFM MIB
-- ******************************************************************
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32, Counter32,
Unsigned32 FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION,
TimeInterval,
TimeStamp, RowStatus,
TruthValue, MacAddress,
TDomain, TAddress FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
InterfaceIndex,
InterfaceIndexOrZero FROM IF-MIB -- [RFC2863]
LldpChassisId,
LldpChassisIdSubtype,
LldpPortId,
LldpPortIdSubtype FROM LLDP-MIB -- [IEEExxx]
VlanIdOrNone, VlanId FROM Q-BRIDGE-MIB -- [RFC4363]
iscomSwitch FROM RAISECOM-BASE-MIB
Dot1agCfmMaintDomainNameType,
Dot1agCfmMaintDomainName,
Dot1agCfmIngressActionFieldValue,
Dot1agCfmMaintAssocNameType,
Dot1agCfmMaintAssocName,
Dot1agCfmMDLevel,
Dot1agCfmMDLevelOrNone,
Dot1agCfmMpDirection,
Dot1agCfmPortStatus,
Dot1agCfmInterfaceStatus,
Dot1agCfmHighestDefectPri,
Dot1agCfmLowestAlarmPri,
Dot1agCfmMepId,
Dot1agCfmMepIdOrZero,
Dot1agCfmMhfCreation,
Dot1agCfmIdPermission,
Dot1agCfmCcmInterval,
Dot1agCfmFngState,
Dot1agCfmRelayActionFieldValue,
Dot1agCfmEgressActionFieldValue,
Dot1agCfmRemoteMepState,
Dot1afCfmIndexIntegerNextFree,
Dot1agCfmMepDefects,
dot1agCfmMepHighestPrDefect,
Dot1agCfmConfigErrors,
Dot1agCfmPbbComponentIdentifier FROM IEEE8021-CFM-MIB --[IEEE8021-CFM-MIB81.mib]
;
rcDot1ag MODULE-IDENTITY
LAST-UPDATED "200706100000Z" -- 06/10/2007 00:00GMT
ORGANIZATION "Raisecom, Inc."
CONTACT-INFO
" Raise Systems
Postal: Beijing,
China
Tel: 86-010-82884499
E-mail: chendonghua@raisecom.com"
DESCRIPTION
"This MIB module defines objects to CFM "
REVISION "200712210000Z" -- 12/21/2007 00:00GMT
DESCRIPTION
"this mib is redefined in order to access from private MIB note outside!"
::= { iscomSwitch 32 }
rcDot1agNotifications OBJECT IDENTIFIER ::= { rcDot1ag 0 }
rcDot1agMIBObjects OBJECT IDENTIFIER ::= { rcDot1ag 1 }
rcDot1agCfmConformance OBJECT IDENTIFIER ::= { rcDot1ag 2 }
-- ******************************************************************
-- Groups in the CFM MIB Module
-- ******************************************************************
rcDot1agCfmStack OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 1 }
rcDot1agCfmDefaultMd OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 2 }
rcDot1agCfmVlan OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 3 }
rcDot1agCfmConfigErrorList OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 4 }
rcDot1agCfmMd OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 5 }
rcDot1agCfmMa OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 6 }
rcDot1agCfmMep OBJECT IDENTIFIER ::= { rcDot1agMIBObjects 7 }
-- ******************************************************************
-- Textual conventions
-- ******************************************************************
-- ******************************************************************
-- The Stack Object. This group will contain all the MIBs objects
-- needed to access the Stack managed object.
-- ******************************************************************
-- ******************************************************************
-- The CFM Stack Table
-- ******************************************************************
rcDot1agCfmStackTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one CFM Stack table per bridge. It permits
the retrieval of information about the Maintenance Points
configured on any given interface.
"
REFERENCE
"802.1ag clauses 12.14.2"
::= { rcDot1agCfmStack 1 }
rcDot1agCfmStackEntry OBJECT-TYPE
SYNTAX RcDot1agCfmStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Stack table entry"
INDEX { rcDot1agCfmStackifIndex, rcDot1agCfmStackVlanIdOrNone,
rcDot1agCfmStackMdLevel, rcDot1agCfmStackDirection
}
::= { rcDot1agCfmStackTable 1 }
RcDot1agCfmStackEntry ::= SEQUENCE {
rcDot1agCfmStackifIndex InterfaceIndex,
rcDot1agCfmStackVlanIdOrNone VlanIdOrNone,
rcDot1agCfmStackMdLevel Dot1agCfmMDLevel,
rcDot1agCfmStackDirection Dot1agCfmMpDirection,
rcDot1agCfmStackMdIndex Unsigned32,
rcDot1agCfmStackMaIndex Unsigned32,
rcDot1agCfmStackMepId Dot1agCfmMepIdOrZero,
rcDot1agCfmStackMacAddress MacAddress
}
rcDot1agCfmStackifIndex
OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable, and rearrange the
rcDot1agCfmStackTable, so that it indexes the entry in the
interface table with the same value of ifAlias that it
indexed before the system restart. If no such entry exists,
then the system SHALL delete all entries in the
rcDot1agCfmStackTable with the interface index.
"
REFERENCE
"802.1ag clause 12.14.2.1.2:a"
::= { rcDot1agCfmStackEntry 1 }
rcDot1agCfmStackVlanIdOrNone
OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN ID to which the MP is attached, or 0, if none."
REFERENCE
"802.1ag clauses 12.14.2.1.2:d, 22.1.7"
::= { rcDot1agCfmStackEntry 2 }
rcDot1agCfmStackMdLevel
OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MD Level of the Maintenance Point."
REFERENCE
"802.1ag clause 12.14.2.1.2:b"
::= { rcDot1agCfmStackEntry 3 }
rcDot1agCfmStackDirection
OBJECT-TYPE
SYNTAX Dot1agCfmMpDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction in which the MP faces on the Bridge Port"
REFERENCE
"802.1ag clause 12.14.2.1.2:c"
::= { rcDot1agCfmStackEntry 4 }
rcDot1agCfmStackMdIndex
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Maintenance Domain in the rcDot1agCfmMdTable
to which the MP is associated, or 0, if none."
REFERENCE
"802.1ag clause 12.14.2.1.3:b"
::= { rcDot1agCfmStackEntry 5 }
rcDot1agCfmStackMaIndex
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the MA in the rcDot1agCfmMaNetTable and
rcDot1agCfmMaCompTable to which the MP is associated, or 0, if
none."
REFERENCE
"802.1ag clause 12.14.2.1.3:c"
::= { rcDot1agCfmStackEntry 6 }
rcDot1agCfmStackMepId
OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If an MEP is configured, the MEPID, else 0"
REFERENCE
"802.1ag clause 12.14.2.1.3:d"
::= { rcDot1agCfmStackEntry 7 }
rcDot1agCfmStackMacAddress
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the MP."
REFERENCE
"802.1ag clause 12.14.2.1.3:e"
::= { rcDot1agCfmStackEntry 8 }
-- ******************************************************************
-- The VLAN Table
-- ******************************************************************
rcDot1agCfmVlanTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the association of VIDs into VLANs. There
is an entry in this table, for each component of the bridge,
for each VID that is:
a) a VID belonging to a VLAN associated with more than
one VID; and
b) not the Primary VLAN of that VID.
The entry in this table contains the Primary VID of the VLAN.
By default, this table is empty, meaning that every VID is
the Primary VID of a single-VID VLAN.
VLANs that are associated with only one VID SHOULD NOT have
an entry in this table.
The writable objects in this table need to be persistent
upon reboot or restart of a device.
"
REFERENCE
"802.1ag clauses 12.14.3.1.3:a, 12.14.3.2.2:a, 12.14.5.3.2:c,
12.14.6.1.3:b, 22.1.5."
::= { rcDot1agCfmVlan 1 }
rcDot1agCfmVlanEntry OBJECT-TYPE
SYNTAX RcDot1agCfmVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN table entry."
INDEX { rcDot1agCfmVlanComponentId, rcDot1agCfmVlanVid }
::= { rcDot1agCfmVlanTable 1 }
RcDot1agCfmVlanEntry ::= SEQUENCE {
rcDot1agCfmVlanComponentId Dot1agCfmPbbComponentIdentifier,
rcDot1agCfmVlanVid VlanId,
rcDot1agCfmVlanPrimaryVid VlanId,
rcDot1agCfmVlanRowStatus RowStatus
}
rcDot1agCfmVlanComponentId
OBJECT-TYPE
SYNTAX Dot1agCfmPbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bridge component within the system to which the information
in this rcDot1agCfmVlanEntry applies. If the system is not a
Bridge, or if only one component is present in the Bridge, then
this variable (index) must be equal to 1.
"
REFERENCE
"802.1ag clause 17.5"
::= { rcDot1agCfmVlanEntry 1 }
rcDot1agCfmVlanVid
OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a VLAN ID belonging to a VLAN that is associated with
more than one VLAN ID, and this is not the Primary VID of the
VLAN.
"
::= { rcDot1agCfmVlanEntry 2 }
rcDot1agCfmVlanPrimaryVid
OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the Primary VLAN ID of the VLAN with which this
entry's rcDot1agCfmVlanVid is associated. This value must not
equal the value of rcDot1agCfmVlanVid.
"
::= { rcDot1agCfmVlanEntry 3 }
rcDot1agCfmVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { rcDot1agCfmVlanEntry 4 }
-- *******************************************************************
-- The Default MD Level object. This group will contain all the
-- MIB objects needed to access and modify default MD level
-- managed objects.
-- *******************************************************************
rcDot1agCfmDefaultMdDefLevel
OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for each rcDot1agCfmDefaultMdEntry whose
rcDot1agCfmDefaultMdLevel object contains the value -1.
After this initialization, this object needs to be persistent
upon reboot or restart of a device.
"
REFERENCE
"802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b"
DEFVAL {0}
::= { rcDot1agCfmDefaultMd 1 }
rcDot1agCfmDefaultMdDefMhfCreation
OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation
-- {
-- defMHFnone (1),
-- defMHFdefault (2),
-- defMHFexplicit (3)
-- }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value indicating if the Management entity can create MHFs
(MIP Half Function) for the VID, for each
rcDot1agCfmDefaultMdEntry whose rcDot1agCfmDefaultMdMhfCreation
object contains the value defMHFdefer. Since, in this
variable, there is no encompassing Maintenance Domain, the
value defMHFdefer is not allowed.
After this initialization, this object needs to be persistent
upon reboot or restart of a device.
"
REFERENCE
"802.1ag clause 12.14.3.1.3:d"
DEFVAL {defMHFnone}
::= { rcDot1agCfmDefaultMd 2 }
rcDot1agCfmDefaultMdDefIdPermission
OBJECT-TYPE
SYNTAX Dot1agCfmIdPermission
-- {
-- sendIdNone (1),
-- sendIdChassis (2),
-- sendIdManage (3),
-- sendIdChassisManage (4)
-- }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MHFs
created by the Default Maintenance Domain, for each
rcDot1agCfmDefaultMdEntry whose rcDot1agCfmDefaultMdIdPermission
object contains the value sendIdDefer. Since, in this
variable, there is no encompassing Maintenance Domain, the
value sendIdDefer is not allowed.
After this initialization, this object needs to be persistent
upon reboot or restart of a device.
"
REFERENCE
"802.1ag clause 12.14.3.1.3:e"
DEFVAL { sendIdNone }
::= { rcDot1agCfmDefaultMd 3 }
-- *******************************************************************
-- The Default MD Level Table
-- *******************************************************************
rcDot1agCfmDefaultMdTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmDefaultMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each bridge component, the Default MD Level Managed Object
controls MHF creation for VIDs that are not attached to a
specific Maintenance Association Managed Object, and Sender ID
TLV transmission by those MHFs.
For each Bridge Port, and for each VLAN ID whose data can
pass through that Bridge Port, an entry in this table is
used by the algorithm in subclause 22.2.3 only if there is no
entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined. If there exists such an
MA, that MA's objects are used by the algorithm in
subclause 22.2.3 in place of this table entry's objects. The
agent maintains the value of rcDot1agCfmDefaultMdStatus to
indicate whether this entry is overridden by an MA.
When first initialized, the agent creates this table
automatically with entries for all VLAN IDs,
with the default values specified for each object.
After this initialization, the writable objects in this
table need to be persistent upon reboot or restart of a
device.
"
REFERENCE
"802.1ag clause 12.14.3"
::= { rcDot1agCfmDefaultMd 4 }
rcDot1agCfmDefaultMdEntry OBJECT-TYPE
SYNTAX RcDot1agCfmDefaultMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Default MD Level table entry."
INDEX { rcDot1agCfmDefaultMdComponentId,
rcDot1agCfmDefaultMdPrimaryVid }
::= { rcDot1agCfmDefaultMdTable 1 }
RcDot1agCfmDefaultMdEntry ::= SEQUENCE {
rcDot1agCfmDefaultMdComponentId Dot1agCfmPbbComponentIdentifier,
rcDot1agCfmDefaultMdPrimaryVid VlanId,
rcDot1agCfmDefaultMdStatus TruthValue,
rcDot1agCfmDefaultMdLevel Dot1agCfmMDLevelOrNone,
rcDot1agCfmDefaultMdMhfCreation Dot1agCfmMhfCreation,
rcDot1agCfmDefaultMdIdPermission Dot1agCfmIdPermission
}
rcDot1agCfmDefaultMdComponentId
OBJECT-TYPE
SYNTAX Dot1agCfmPbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bridge component within the system to which the information
in this rcDot1agCfmDefaultMdEntry applies. If the system is not
a Bridge, or if only one component is present in the Bridge,
then this variable (index) must be equal to 1.
"
REFERENCE
"802.1ag clause 17.5"
::= { rcDot1agCfmDefaultMdEntry 1 }
rcDot1agCfmDefaultMdPrimaryVid
OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Primary VID of the VLAN to which this entry's objects
apply."
::= { rcDot1agCfmDefaultMdEntry 2 }
rcDot1agCfmDefaultMdStatus
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of this Default MD Level table entry. True if there is
no entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined, else false.
"
REFERENCE
"802.1ag clause 12.14.3.1.3:b"
::= { rcDot1agCfmDefaultMdEntry 3 }
rcDot1agCfmDefaultMdLevel
OBJECT-TYPE
SYNTAX Dot1agCfmMDLevelOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for the VLAN to which this entry's objects
apply. If this object has the value -1, the MD Level for MHF
creation for this VLAN is controlled by
rcDot1agCfmDefaultMdDefLevel.
"
REFERENCE
"802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b"
DEFVAL {-1}
::= { rcDot1agCfmDefaultMdEntry 4 }
rcDot1agCfmDefaultMdMhfCreation
OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value indicating if the Management entity can create MHFs
(MIP Half Function) for this VID at this MD Level. If this
object has the value defMHFdefer, MHF creation for this VLAN
is controlled by rcDot1agCfmDefaultMdDefMhfCreation.
The value of this variable is meaningless if the values of
rcDot1agCfmDefaultMdStatus is false.
"
REFERENCE
"802.1ag clause 12.14.3.1.3:d"
DEFVAL {defMHFdefer}
::= { rcDot1agCfmDefaultMdEntry 5 }
rcDot1agCfmDefaultMdIdPermission
OBJECT-TYPE
SYNTAX Dot1agCfmIdPermission
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MHFs
created by the Default Maintenance Domain. If this object
has the value sendIdDefer, Sender ID TLV transmission for
this VLAN is controlled by rcDot1agCfmDefaultMdDefIdPermission.
The value of this variable is meaningless if the values of
rcDot1agCfmDefaultMdStatus is false.
"
REFERENCE
"802.1ag clause 12.14.3.1.3:e"
DEFVAL { sendIdDefer }
::= { rcDot1agCfmDefaultMdEntry 6 }
-- ******************************************************************
-- The CFM configuration error list managed object. This group will
-- contain all the MIB objects used to read the interfaces and VIDs
-- configured incorrectly.
-- ******************************************************************
-- ******************************************************************
-- The CFM Configuration Error List Table
-- ******************************************************************
rcDot1agCfmConfigErrorListTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmConfigErrorListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CFM Configuration Error List table provides a list of
Interfaces and VIDs that are incorrectly configured.
"
REFERENCE
"802.1ag clause 12.14.4"
::= {rcDot1agCfmConfigErrorList 1}
rcDot1agCfmConfigErrorListEntry OBJECT-TYPE
SYNTAX RcDot1agCfmConfigErrorListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Config Error List Table entry"
INDEX { rcDot1agCfmConfigErrorListVid,
rcDot1agCfmConfigErrorListIfIndex
}
::= { rcDot1agCfmConfigErrorListTable 1}
RcDot1agCfmConfigErrorListEntry ::= SEQUENCE {
rcDot1agCfmConfigErrorListVid VlanId,
rcDot1agCfmConfigErrorListIfIndex InterfaceIndex,
rcDot1agCfmConfigErrorListErrorType Dot1agCfmConfigErrors
}
rcDot1agCfmConfigErrorListVid
OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID of the VLAN with interfaces in error."
REFERENCE
"802.1ag Clause 12.14.4.1.2:a"
::= { rcDot1agCfmConfigErrorListEntry 1 }
rcDot1agCfmConfigErrorListIfIndex
OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the IfIndex of the interface.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable so that it indexes the
entry in the interface table with the same value of ifAlias
that it indexed before the system restart. If no such
entry exists, then the system SHALL delete any entries in
rcDot1agCfmConfigErrorListTable indexed by that
InterfaceIndex value.
"
REFERENCE
"802.1ag clause 12.14.4.1.2:b"
::= { rcDot1agCfmConfigErrorListEntry 2 }
rcDot1agCfmConfigErrorListErrorType
OBJECT-TYPE
SYNTAX Dot1agCfmConfigErrors
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A vector of Boolean error conditions from 22.2.4, any of
which may be true:
0) CFMleak;
1) ConflictingVids;
2) ExcessiveLevels;
3) OverlappedLevels.
"
REFERENCE
"802.1ag clause 12.14.4.1.3:b"
::= { rcDot1agCfmConfigErrorListEntry 3 }
-- ******************************************************************
-- The Maintenance Domain Managed Object. This group contains all
-- the MIB objects used to maintain Maintenance Domains.
-- ******************************************************************
rcDot1agCfmMdTableNextIndex OBJECT-TYPE
SYNTAX Dot1afCfmIndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for rcDot1agCfmMdIndex in
the rcDot1agCfmMdTable, or a zero to indicate that none exist.
"
::= { rcDot1agCfmMd 1 }
-- ******************************************************************
-- The Maintenance Domain Table
-- ******************************************************************
rcDot1agCfmMdTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Domain table. Each row in the table
represents a different Maintenance Domain.
A Maintenance Domain is described in 802.1ag (3.21) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.
"
REFERENCE
"802.1ag clauses 3.21 and 18.1"
::= { rcDot1agCfmMd 2 }
rcDot1agCfmMdEntry OBJECT-TYPE
SYNTAX RcDot1agCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage.
"
INDEX {rcDot1agCfmMdIndex }
::= { rcDot1agCfmMdTable 1 }
RcDot1agCfmMdEntry ::= SEQUENCE {
rcDot1agCfmMdIndex Unsigned32,
rcDot1agCfmMdFormat Dot1agCfmMaintDomainNameType,
rcDot1agCfmMdName Dot1agCfmMaintDomainName,
rcDot1agCfmMdMdLevel Dot1agCfmMDLevel,
rcDot1agCfmMdMhfCreation Dot1agCfmMhfCreation,
rcDot1agCfmMdMhfIdPermission Dot1agCfmIdPermission,
rcDot1agCfmMdMaNextIndex Dot1afCfmIndexIntegerNextFree,
rcDot1agCfmMdRowStatus RowStatus
}
rcDot1agCfmMdIndex
OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the Maintenance Domain table.
rcDot1agCfmMdTableNextIndex needs to be inspected to find an
available index for row-creation.
Referential integrity is required, i.e., the index needs to be
persistent upon a reboot or restart of a device. The index
can never be reused for other Maintenance Domain. The index
value should keep increasing up to the time that they wrap
around. This is to facilitate access control based on OID.
"
::= { rcDot1agCfmMdEntry 1 }
rcDot1agCfmMdFormat
OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainNameType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type (and thereby format) of the Maintenance Domain Name."
REFERENCE
"802.1ag clause 21.6.5.1"
DEFVAL { charString }
::= { rcDot1agCfmMdEntry 2 }
rcDot1agCfmMdName
OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Domain name. The type/format of this object
is determined by the value of the rcDot1agCfmMdNameType object.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain.
Clause 3.23 defines a Maintenance Domain name as the
identifier, unique over the domain for which CFM is to
protect against accidental concatenation of Service
Instances, of a particular Maintenance Domain.
"
REFERENCE
"802.1ag clauses 3.23, 12.14.5, and 21.6.5.3"
DEFVAL { "DEFAULT" }
::= { rcDot1agCfmMdEntry 3 }
rcDot1agCfmMdMdLevel
OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Domain Level."
REFERENCE
"802.1ag clause 12.14.5.1.3:b"
DEFVAL { 0 }
::= { rcDot1agCfmMdEntry 4 }
rcDot1agCfmMdMhfCreation
OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation
-- {
-- defMHFnone (1),
-- defMHFdefault (2),
-- defMHFexplicit (3)
-- }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enumerated value indicating whether the management entity can
create MHFs (MIP Half Function) for this Maintenance Domain.
Since, in this variable, there is no encompassing Maintenance
Domain, the value defMHFdefer is not allowed.
"
REFERENCE
"802.1ag clause 12.14.5.1.3:c"
DEFVAL { defMHFnone }
::= { rcDot1agCfmMdEntry 5 }
rcDot1agCfmMdMhfIdPermission
OBJECT-TYPE
SYNTAX Dot1agCfmIdPermission
-- {
-- sendIdNone (1),
-- sendIdChassis (2),
-- sendIdManage (3),
-- sendIdChassisManage (4)
-- }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this Maintenance Domain. Since, in this
variable, there is no encompassing Maintenance Domain, the
value sendIdDefer is not allowed.
"
REFERENCE
"802.1ag clause 12.14.5.1.3:d"
DEFVAL { sendIdNone }
::= { rcDot1agCfmMdEntry 6 }
rcDot1agCfmMdMaNextIndex
OBJECT-TYPE
SYNTAX Dot1afCfmIndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value to be used as the index of the MA table entries, both
the rcDot1agCfmMaNetTable and the rcDot1agCfmMaCompTable, for
this Maintenance Domain when the management entity wants to
create a new row in those tables.
"
::= { rcDot1agCfmMdEntry 7 }
rcDot1agCfmMdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { rcDot1agCfmMdEntry 8 }
-- ******************************************************************
-- The Maintenance Association Object. This group contains all the
-- MIB objects used to read, create, modify, and delete Maintenance
-- Associations in the MIB.
-- ******************************************************************
-- ******************************************************************
-- The Maintenance Association (MA) Network Table
-- ******************************************************************
rcDot1agCfmMaNetTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmMaNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Association table. Each row in the table
represents an MA. An MA is a set of MEPs, each configured
with a single service instance.
This is the part of the complete MA table that is constant
across all Bridges in a Maintenance Domain, and across all
components of a single Bridge. That part of the MA table that
can vary from Bridge component to Bridge component is contained
in the rcDot1agCfmMaCompTable.
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs. Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity. The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance. Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances. A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.16 and 18.2).
This table uses two indices, first index is the index of the
Maintenance Domain table. The second index is the same as the
index of the rcDot1agCfmMaCompEntry for the same MA.
The writable objects in this table need to be persistent
upon reboot or restart of a device.
"
REFERENCE
"802.1ag clause 18.2"
::= { rcDot1agCfmMa 1 }
rcDot1agCfmMaNetEntry OBJECT-TYPE
SYNTAX RcDot1agCfmMaNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MA table entry."
INDEX {rcDot1agCfmMdIndex, rcDot1agCfmMaIndex }
::= { rcDot1agCfmMaNetTable 1 }
RcDot1agCfmMaNetEntry ::= SEQUENCE {
rcDot1agCfmMaIndex Unsigned32,
rcDot1agCfmMaNetFormat Dot1agCfmMaintAssocNameType,
rcDot1agCfmMaNetName Dot1agCfmMaintAssocName,
rcDot1agCfmMaNetCcmInterval Dot1agCfmCcmInterval,
rcDot1agCfmMaNetRowStatus RowStatus
}
rcDot1agCfmMaIndex
OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the MA table rcDot1agCfmMdMaNextIndex needs to
be inspected to find an available index for row-creation.
"
::= { rcDot1agCfmMaNetEntry 1 }
rcDot1agCfmMaNetFormat
OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocNameType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type (and thereby format) of the Maintenance Association
Name.
"
REFERENCE
"802.1ag clauses 21.6.5.4"
::= { rcDot1agCfmMaNetEntry 2 }
rcDot1agCfmMaNetName
OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Short Maintenance Association name. The type/format of
this object is determined by the value of the
rcDot1agCfmMaNetNameType object. This name must be unique within
a maintenance domain.
"
REFERENCE
"802.1ag clauses 21.6.5.6, and Table 21-20"
::= { rcDot1agCfmMaNetEntry 3 }
rcDot1agCfmMaNetCcmInterval
OBJECT-TYPE
SYNTAX Dot1agCfmCcmInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interval between CCM transmissions to be used by all MEPs
in the MA.
"
REFERENCE
"802.1ag clause 12.14.6.1.3:e"
DEFVAL { interval1s }
::= { rcDot1agCfmMaNetEntry 4 }
rcDot1agCfmMaNetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { rcDot1agCfmMaNetEntry 5 }
-- ******************************************************************
-- The Maintenance Association (MA) Component Table
-- ******************************************************************
rcDot1agCfmMaCompTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmMaCompEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Association table. Each row in the table
represents an MA. An MA is a set of MEPs, each configured
with a single service instance.
This is the part of the complete MA table that is variable
across the Bridges in a Maintenance Domain, or across the
components of a single Bridge. That part of the MA table that
is constant across the Bridges and their components in a
Maintenance Domain is contained in the rcDot1agCfmMaNetTable.
This table uses three indices, first index is the
rcDot1agCfmPbbComponentIdentifier that identifies the component
within the Bridge for which the information in the
rcDot1agCfmMaCompEntry applies. The second is the index of the
Maintenance Domain table. The third index is the same as the
index of the rcDot1agCfmMaNetEntry for the same MA.
The writable objects in this table need to be persistent
upon reboot or restart of a device.
"
REFERENCE
"802.1ag clause 18.2"
::= { rcDot1agCfmMa 2 }
rcDot1agCfmMaCompEntry OBJECT-TYPE
SYNTAX RcDot1agCfmMaCompEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MA table entry."
INDEX {rcDot1agCfmMaComponentId,
rcDot1agCfmMdIndex, rcDot1agCfmMaIndex }
::= { rcDot1agCfmMaCompTable 1 }
RcDot1agCfmMaCompEntry ::= SEQUENCE {
rcDot1agCfmMaComponentId Dot1agCfmPbbComponentIdentifier,
rcDot1agCfmMaCompPrimaryVlanId VlanIdOrNone,
rcDot1agCfmMaCompMhfCreation Dot1agCfmMhfCreation,
rcDot1agCfmMaCompIdPermission Dot1agCfmIdPermission,
rcDot1agCfmMaCompNumberOfVids Unsigned32,
rcDot1agCfmMaCompRowStatus RowStatus
}
rcDot1agCfmMaComponentId
OBJECT-TYPE
SYNTAX Dot1agCfmPbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bridge component within the system to which the information
in this rcDot1agCfmMaCompEntry applies. If the system is not a
Bridge, or if only one component is present in the Bridge, then
this variable (index) must be equal to 1.
"
REFERENCE
"802.1ag clause 17.5"
::= { rcDot1agCfmMaCompEntry 1 }
rcDot1agCfmMaCompPrimaryVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Primary VLAN ID with which the Maintenance Association is
associated, or 0 if the MA is not attached to any VID. If
the MA is associated with more than one VID, the
rcDot1agCfmVlanTable lists them."
REFERENCE
"802.1ag clause 12.14.6.1.3:b"
::= { rcDot1agCfmMaCompEntry 2 }
rcDot1agCfmMaCompMhfCreation
OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates if the Management entity can create MHFs (MIP Half
Function) for this MA.
"
REFERENCE
"802.1ag clause 12.14.6.1.3:c"
DEFVAL { defMHFdefer }
::= { rcDot1agCfmMaCompEntry 3 }
rcDot1agCfmMaCompIdPermission
OBJECT-TYPE
SYNTAX Dot1agCfmIdPermission
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this MA.
"
REFERENCE
"802.1ag clause 12.14.6.1.3:d"
DEFVAL { sendIdDefer }
::= { rcDot1agCfmMaCompEntry 4 }
rcDot1agCfmMaCompNumberOfVids
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VIDs associated with the MA.
"
REFERENCE
"802.1ag clause 12.14.6.1.3:b"
::= { rcDot1agCfmMaCompEntry 5 }
rcDot1agCfmMaCompRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { rcDot1agCfmMaCompEntry 6 }
-- ******************************************************************
-- The list of known MEPs for a given MA
-- ******************************************************************
rcDot1agCfmMaMepListTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmMaMepListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of MEPIDs that belong to this MA.
Clause 12.14.6.1.3 specifies that a list of MEPIDs in all
bridges in that MA, but since SNMP SMI does not allow to
state in a MIB that an object in a table is an array, the
information has to be stored in another table with two
indices, being the first index, the index of the table that
contains the list or array.
For all bridges in which the same MAID {rcDot1agCfmMdFormat,
rcDot1agCfmMdName, rcDot1agCfmMaNetFormat, and rcDot1agCfmMaNetName}
is configured, the same set of rcDot1agCfmMaMepListIdentifiers
must be configured in the bridges' rcDot1agCfmMaMepListTables.
This allows each MEP to determine whether or not it is
receiving CCMs from all of the other MEPs in the MA.
For example, if one were creating a new MA whose MAID were
{charString, 'Dom1', charString, 'MA1'}, that had 2 MEPs, whose
MEPIDs were 1 and 3, one could, in Bridge A:
1. Get a new MD index d from rcDot1agCfmMdTableNextIndex.
2. Create the Maintenance Domain {charString, 'Dom1'}.
3. Get a new MA index a from rcDot1agCfmMdMaNextIndex [d].
4. Create the Maintenance Association {charString, 'MA1'}.
5. Create a new rcDot1agCfmMaMepListEntry for each of the MEPs
in the MA: [d, a, 1] and [d, a, 3].
6. Create one of the new MEPs, say [d, a, 1].
Then, in Bridge B:
7. Do all of these steps 1-6, except for using the other MEPID
for the new MEP in Step 6, in this example, MEPID 3.
Note that, when creating the MA, MEP List Table, and MEP
entries in the second bridge, the indices 'd' and 'a'
identifying the MAID {charString, 'Dom1', charString, 'MA1'}
may have different values than those in the first Bridge.
"
REFERENCE
"802.1ag clause 12.14.6.1.3:g"
::= { rcDot1agCfmMa 3 }
rcDot1agCfmMaMepListEntry OBJECT-TYPE
SYNTAX RcDot1agCfmMaMepListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The known MEPS table entry."
INDEX { rcDot1agCfmMdIndex,
rcDot1agCfmMaIndex,
rcDot1agCfmMaMepListIdentifier
}
::= { rcDot1agCfmMaMepListTable 1 }
RcDot1agCfmMaMepListEntry ::= SEQUENCE {
rcDot1agCfmMaMepListIdentifier Dot1agCfmMepId,
rcDot1agCfmMaMepListRowStatus RowStatus
}
rcDot1agCfmMaMepListIdentifier
OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEPID"
REFERENCE
"802.1ag clause 12.14.6.1.3:g"
::= { rcDot1agCfmMaMepListEntry 1 }
rcDot1agCfmMaMepListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row. Read SNMPv2-TC (RFC1903) for an
explanation of the possible values this object can take.
"
::= { rcDot1agCfmMaMepListEntry 2 }
-- ******************************************************************
-- The MEP Object. This object represents a Maintenance End
-- Point as described in 802.1ag document.
-- ******************************************************************
-- ******************************************************************
-- The MEP Table
-- ******************************************************************
rcDot1agCfmMepTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Association End Point (MEP) table.
Each row in the table represents a different MEP. A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses. It is an end point of a
single Maintenance Association, and is an endpoint of a
separate Maintenance Entity for each of the other MEPs in
the same Maintenance Association (802.1ag clause 3.17).
This table uses three indices. The first two indices are the
indices of the Maintenance Domain and MA tables, the reason
being that a MEP is always related to an MA and Maintenance
Domain.
The MEP table also stores all the managed objects for sending
LBM and LTM.
*LBM Managed objects
LBM Managed objects in the MEP table
enables the management entity to initiate
transmission of Loopback messages. It will signal the MEP
that it should transmit some number of Loopback messages
and detect the detection (or lack thereof) of the
corresponding Loopback messages.
Steps to use entries in this table:
1) Wait for rcDot1agCfmMepTransmitLbmStatus value to be
true. To do this do this sequence:
a. an SNMP GET for both SnmpSetSerialNo and
rcDot1agCfmMepTransmitLbmStatus objects (in same SNMP
PDU).
b. Check if value for rcDot1agCfmMepTransmitLbmStatus is true.
- if not, wait x seconds, go to step a above.
- if yes, save the value of SnmpSetSerialNo and go
to step 2) below
2) Change rcDot1agCfmMepTransmitLbmStatus value from true to
false to ensure no other management entity will use
the service. In order to not disturb a possible other NMS
do this by sending an SNMP SET for both SnmpSetSerialNo
and rcDot1agCfmMepTransmitLbmStatus objects (in same SNMP
PDU, and make sure SNmpSetSerialNo is the first varBind).
For the SnmpSetSerialNo varBind, use the value that you
obtained in step 1)a.. This ensures that two cooperating
NMSes will not step on each others toes.
3) Setup the different data to be sent (number of messages,
optional TLVs,...), except do not set
rcDot1agCfmMepTransmitLbmMessages.
4) Record the current values of rcDot1agCfmMepLbrIn,
rcDot1agCfmMepLbrInOutOfOrder, and rcDot1agCfmMepLbrBadMsdu.
6) Set rcDot1agCfmMepTransmitLbmMessages to a non-zero value to
initiate transmission of Loopback messages.
7) Check the value of rcDot1agCfmMepTransmitLbmResultOK to
find out if the operation was successfully initiated or
not.
8) Monitor the value of rcDot1agCfmMepTransmitLbmMessages.
When it reaches 0, the last LBM has been transmitted.
Wait an additional 5 seconds to ensure that all LBRs have
been returned.
9) Compare rcDot1agCfmMepLbrIn, rcDot1agCfmMepLbrInOutOfOrder,
and rcDot1agCfmMepLbrBadMsdu to their old values from step
4, above, to get the results of the test.
10) Change the rcDot1agCfmMepTransmitLbmStatus value back to
true to allow other management entities to use the table.
*LTM Managed objects
The LTM Managed objects in the MEP table are used in a manner
similar to that described for LBM transmission, above, except
transmission is initiated by writing a value to the
rcDot1agCfmMepTransmitLtmFlags object. Upon
successfully initiating the transmission, the variables
rcDot1agCfmMepTransmitLtmSeqNumber and
rcDot1agCfmMepTransmitLtmEgressIdentifier return the information
required to recover the results of the LTM from the
rcDot1agCfmLtrTable.
"
REFERENCE
"802.1ag clauses 12.14.7 and 19.2"
::= { rcDot1agCfmMep 1 }
rcDot1agCfmMepEntry OBJECT-TYPE
SYNTAX RcDot1agCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MEP table entry"
INDEX { rcDot1agCfmMdIndex,
rcDot1agCfmMaIndex,
rcDot1agCfmMepIdentifier
}
::= { rcDot1agCfmMepTable 1 }
RcDot1agCfmMepEntry ::= SEQUENCE {
rcDot1agCfmMepIdentifier Dot1agCfmMepId,
rcDot1agCfmMepIfIndex InterfaceIndexOrZero,
rcDot1agCfmMepDirection Dot1agCfmMpDirection,
rcDot1agCfmMepPrimaryVid Unsigned32,
rcDot1agCfmMepActive TruthValue,
rcDot1agCfmMepFngState Dot1agCfmFngState,
rcDot1agCfmMepCciEnabled TruthValue,
rcDot1agCfmMepCcmLtmPriority Unsigned32,
rcDot1agCfmMepMacAddress MacAddress,
rcDot1agCfmMepLowPrDef Dot1agCfmLowestAlarmPri,
rcDot1agCfmMepFngAlarmTime TimeInterval,
rcDot1agCfmMepFngResetTime TimeInterval,
rcDot1agCfmMepHighestPrDefect Dot1agCfmHighestDefectPri,
rcDot1agCfmMepDefects Dot1agCfmMepDefects,
rcDot1agCfmMepErrorCcmLastFailure OCTET STRING,
rcDot1agCfmMepXconCcmLastFailure OCTET STRING,
rcDot1agCfmMepCcmSequenceErrors Counter32,
rcDot1agCfmMepCciSentCcms Counter32,
rcDot1agCfmMepNextLbmTransId Unsigned32,
rcDot1agCfmMepLbrIn Counter32,
rcDot1agCfmMepLbrInOutOfOrder Counter32,
rcDot1agCfmMepLbrBadMsdu Counter32,
rcDot1agCfmMepLtmNextSeqNumber Unsigned32,
rcDot1agCfmMepUnexpLtrIn Counter32,
rcDot1agCfmMepLbrOut Counter32,
rcDot1agCfmMepTransmitLbmStatus TruthValue,
rcDot1agCfmMepTransmitLbmDestMacAddress MacAddress,
rcDot1agCfmMepTransmitLbmDestMepId Dot1agCfmMepIdOrZero,
rcDot1agCfmMepTransmitLbmDestIsMepId TruthValue,
rcDot1agCfmMepTransmitLbmMessages Integer32,
rcDot1agCfmMepTransmitLbmDataTlv OCTET STRING,
rcDot1agCfmMepTransmitLbmVlanPriority Integer32,
rcDot1agCfmMepTransmitLbmVlanDropEnable TruthValue,
rcDot1agCfmMepTransmitLbmResultOK TruthValue,
rcDot1agCfmMepTransmitLbmSeqNumber Unsigned32,
rcDot1agCfmMepTransmitLtmStatus TruthValue,
rcDot1agCfmMepTransmitLtmFlags BITS,
rcDot1agCfmMepTransmitLtmTargetMacAddress MacAddress,
rcDot1agCfmMepTransmitLtmTargetMepId Dot1agCfmMepIdOrZero,
rcDot1agCfmMepTransmitLtmTargetIsMepId TruthValue,
rcDot1agCfmMepTransmitLtmTtl Unsigned32,
rcDot1agCfmMepTransmitLtmResult TruthValue,
rcDot1agCfmMepTransmitLtmSeqNumber Unsigned32,
rcDot1agCfmMepTransmitLtmEgressIdentifier OCTET STRING,
rcDot1agCfmMepRowStatus RowStatus
}
rcDot1agCfmMepIdentifier
OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
association End Point (3.18).
MEP Identifier is also known as the MEPID.
"
REFERENCE
"802.1ag clauses 3.18, 19.2 and 12.14.7"
::= { rcDot1agCfmMepEntry 1 }
rcDot1agCfmMepIfIndex
OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable so that it indexes the
entry in the interface table with the same value of ifAlias
that it indexed before the system restart. If no such
entry exists, then the system SHALL set this variable to 0.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:b"
::= { rcDot1agCfmMepEntry 2 }
rcDot1agCfmMepDirection
OBJECT-TYPE
SYNTAX Dot1agCfmMpDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The direction in which the MEP faces on the Bridge port."
REFERENCE
"802.1ag clauses 12.14.7.1.3:c and 19.2"
::= { rcDot1agCfmMepEntry 3 }
rcDot1agCfmMepPrimaryVid
OBJECT-TYPE
SYNTAX Unsigned32(0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or that the MEP's MA is associated with no VID."
REFERENCE
"802.1ag clauses 12.14.7.1.3:d"
DEFVAL { 0 }
::= { rcDot1agCfmMepEntry 4 }
rcDot1agCfmMepActive
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative state of the MEP
A Boolean indicating the administrative state of the MEP.
True indicates that the MEP is to function normally, and
false that it is to cease functioning."
REFERENCE
"802.1ag clauses 12.14.7.1.3:e and 20.9.1"
DEFVAL { false }
::= { rcDot1agCfmMepEntry 5 }
rcDot1agCfmMepFngState
OBJECT-TYPE
SYNTAX Dot1agCfmFngState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the MEP Fault Notification Generator
State Machine.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:f and 20.35"
DEFVAL { fngReset }
::= { rcDot1agCfmMepEntry 6 }
rcDot1agCfmMepCciEnabled
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true, the MEP will generate CCM messages."
REFERENCE
"802.1ag clauses 12.14.7.1.3:g and 20.10.1"
DEFVAL { false }
::= { rcDot1agCfmMepEntry 7 }
rcDot1agCfmMepCcmLtmPriority
OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value for CCMs and LTMs transmitted by the MEP.
Default Value is the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default value for this
variable from the priority regeneration table by extracting the
highest priority value in this table on this MEPs bridge port.
(1 is lowest, then 2, then 0, then 3-7).
"
REFERENCE
"802.1ag clause 12.14.7.1.3:h"
::= { rcDot1agCfmMepEntry 8 }
rcDot1agCfmMepMacAddress
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the MEP."
REFERENCE
"802.1ag clause 12.14.7.1.3:i and 19.4"
::= { rcDot1agCfmMepEntry 9 }
rcDot1agCfmMepLowPrDef
OBJECT-TYPE
SYNTAX Dot1agCfmLowestAlarmPri
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer value specifying the lowest priority defect
that is allowed to generate fault alarm.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1"
DEFVAL { macRemErrXcon }
::= { rcDot1agCfmMepEntry 10}
rcDot1agCfmMepFngAlarmTime
OBJECT-TYPE
SYNTAX TimeInterval (250..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time that defects must be present before a Fault Alarm is
issued (fngAlarmTime. 20.33.3) (default 2.5s).
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:l and 20.33.3"
DEFVAL { 250 }
::= { rcDot1agCfmMepEntry 11 }
rcDot1agCfmMepFngResetTime
OBJECT-TYPE
SYNTAX TimeInterval (250..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time that defects must be absent before resetting a
Fault Alarm (fngResetTime, 20.33.4) (default 10s).
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:m and 20.33.4"
DEFVAL { 1000 }
::= { rcDot1agCfmMepEntry 12 }
rcDot1agCfmMepHighestPrDefect
OBJECT-TYPE
SYNTAX Dot1agCfmHighestDefectPri
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:n 20.33.9 and Table 21-1"
::= { rcDot1agCfmMepEntry 13 }
rcDot1agCfmMepDefects
OBJECT-TYPE
SYNTAX Dot1agCfmMepDefects
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A vector of Boolean error conditions from Table 20-1, any of
which may be true:
DefRDICCM(0)
DefMACstatus(1)
DefRemoteCCM(2)
DefErrorCCM(3)
DefXconCCM(4)
"
REFERENCE
".1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q,
12.14.7.1.3:r, 12.14.7.1.3:s, 20.21.3, 20.23.3, 20.33.5,
20.33.6, 20.33.7."
::= { rcDot1agCfmMepEntry 14 }
rcDot1agCfmMepErrorCcmLastFailure
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..1522))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last-received CCM that triggered an DefErrorCCM fault."
REFERENCE
"802.1ag clauses 12.14.7.1.3:t and 20.21.2"
::= { rcDot1agCfmMepEntry 15 }
rcDot1agCfmMepXconCcmLastFailure
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..1522))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last-received CCM that triggered a DefXconCCM fault."
REFERENCE
"802.1ag clauses 12.14.7.1.3:u and 20.23.2"
::= { rcDot1agCfmMepEntry 16 }
rcDot1agCfmMepCcmSequenceErrors
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of out-of-sequence CCMs received from all
remote MEPs.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:v and 20.16.12"
::= { rcDot1agCfmMepEntry 17 }
rcDot1agCfmMepCciSentCcms
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Continuity Check messages transmitted."
REFERENCE
"802.1ag clauses 12.14.7.1.3:w and 20.10.2"
::= { rcDot1agCfmMepEntry 18 }
rcDot1agCfmMepNextLbmTransId
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next sequence number/transaction identifier to be sent in a
Loopback message. This sequence number can be zero because
it wraps around.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:x and 20.28.2"
::= { rcDot1agCfmMepEntry 19 }
rcDot1agCfmMepLbrIn
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of valid, in-order Loopback Replies received."
REFERENCE
"802.1ag clause 12.14.7.1.3:y and 20.31.1"
::= { rcDot1agCfmMepEntry 20 }
rcDot1agCfmMepLbrInOutOfOrder
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of valid, out-of-order Loopback Replies
received.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:z and 20.31.1"
::= { rcDot1agCfmMepEntry 21 }
rcDot1agCfmMepLbrBadMsdu
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3).
"
REFERENCE
"802.1ag clause 12.14.7.1.3:aa 20.2.3"
::= { rcDot1agCfmMepEntry 22}
rcDot1agCfmMepLtmNextSeqNumber
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around.
"
REFERENCE
"802.1ag clause 12.14.7.1.3:ab and 20.36.1"
::= { rcDot1agCfmMepEntry 23 }
rcDot1agCfmMepUnexpLtrIn
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected LTRs received (20.39.1).
"
REFERENCE
"802.1ag clause 12.14.7.1.3:ac 20.39.1"
::= { rcDot1agCfmMepEntry 24 }
rcDot1agCfmMepLbrOut
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Loopback Replies transmitted."
REFERENCE
"802.1ag clause 12.14.7.1.3:ad and 20.26.2"
::= { rcDot1agCfmMepEntry 25 }
rcDot1agCfmMepTransmitLbmStatus
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A Boolean flag set to true by the bridge port to indicate
that another LBM may be transmitted."
DEFVAL { true }
::= { rcDot1agCfmMepEntry 26 }
rcDot1agCfmMepTransmitLbmDestMacAddress
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
rcDot1agCfmMepTransmitLbmDestIsMepId is 'false'.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:b"
::= { rcDot1agCfmMepEntry 27 }
rcDot1agCfmMepTransmitLbmDestMepId
OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the column
rcDot1agCfmMepTransmitLbmDestIsMepId is 'true'.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:b"
::= { rcDot1agCfmMepEntry 28 }
rcDot1agCfmMepTransmitLbmDestIsMepId
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"True indicates that MEPID of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:b"
::= {rcDot1agCfmMepEntry 29 }
rcDot1agCfmMepTransmitLbmMessages
OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of Loopback messages to be transmitted."
REFERENCE
"802.1ag clause 12.14.7.3.2:c"
DEFVAL { 1 }
::= {rcDot1agCfmMepEntry 30 }
rcDot1agCfmMepTransmitLbmDataTlv
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1500))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:d"
::= { rcDot1agCfmMepEntry 31 }
rcDot1agCfmMepTransmitLbmVlanPriority
OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
The default value is CCM priority.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:e"
::= { rcDot1agCfmMepEntry 32 }
rcDot1agCfmMepTransmitLbmVlanDropEnable
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.
For more information about VLAN Drop Enable, please check
IEEE 802.1ad.
"
REFERENCE
"802.1ag clause 12.14.7.3.2:e"
DEFVAL { true }
::= { rcDot1agCfmMepEntry 33 }
rcDot1agCfmMepTransmitLbmResultOK
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
be sent.
"
REFERENCE
"802.1ag clause 12.14.7.3.3:a"
DEFVAL { true }
::= { rcDot1agCfmMepEntry 34 }
rcDot1agCfmMepTransmitLbmSeqNumber
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Loopback Transaction Identifier
(rcDot1agCfmMepNextLbmTransId) of the first LBM (to be) sent.
The value returned is undefined if
rcDot1agCfmMepTransmitLbmResultOK is false.
"
REFERENCE
"802.1ag clause 12.14.7.3.3:a"
::= { rcDot1agCfmMepEntry 35 }
rcDot1agCfmMepTransmitLtmStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A Boolean flag set to true by the bridge port to indicate
that another LTM may be transmitted.
Reset to false by the MEP Linktrace Initiator State Machine."
DEFVAL { true }
::= { rcDot1agCfmMepEntry 36 }
rcDot1agCfmMepTransmitLtmFlags
OBJECT-TYPE
SYNTAX BITS {
useFDBonly (0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flags field for LTMs transmitted by the MEP."
REFERENCE
"802.1ag clause 12.14.7.4.2:b and 20.37.1"
DEFVAL { {useFDBonly } }
::= { rcDot1agCfmMepEntry 37 }
rcDot1agCfmMepTransmitLtmTargetMacAddress
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
rcDot1agCfmMepTransmitLtmTargetIsMepId is 'false'.
"
REFERENCE
"802.1ag clause 12.14.7.4.2:c"
::= { rcDot1agCfmMepEntry 38 }
rcDot1agCfmMepTransmitLtmTargetMepId
OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
rcDot1agCfmMepTransmitLtmTargetIsMepId is 'true'.
"
REFERENCE
"802.1ag clause 12.14.7.4.2:c"
::= { rcDot1agCfmMepEntry 39 }
rcDot1agCfmMepTransmitLtmTargetIsMepId
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
"
REFERENCE
"802.1ag clause 12.14.7.4.2:c"
::= { rcDot1agCfmMepEntry 40 }
rcDot1agCfmMepTransmitLtmTtl
OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each Linktrace Responder that
handles the LTM. The value returned in the LTR is one less
than that received in the LTM. If the LTM TTL is 0 or 1, the
LTM is not forwarded to the next hop, and if 0, no LTR is
generated.
"
REFERENCE
"802.1ag clause 12.14.7.4.2:d and 21.8.4"
DEFVAL {64}
::= { rcDot1agCfmMepEntry 41 }
rcDot1agCfmMepTransmitLtmResult
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent"
REFERENCE
"802.1ag clause 12.14.7.4.3:a"
DEFVAL { true }
::= { rcDot1agCfmMepEntry 42 }
rcDot1agCfmMepTransmitLtmSeqNumber
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LTM Transaction Identifier
(rcDot1agCfmMepLtmNextSeqNumber) of the LTM sent.
The value returned is undefined if
rcDot1agCfmMepTransmitLtmResult is false.
"
REFERENCE
"802.1ag clause 12.14.7.4.3:a"
::= { rcDot1agCfmMepEntry 43 }
rcDot1agCfmMepTransmitLtmEgressIdentifier
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the MEP Linktrace Initiator that is originating,
or the Linktrace Responder that is forwarding, this LTM.
The low-order six octets contain a 48-bit IEEE MAC address
unique to the system in which the MEP Linktrace Initiator
or Linktrace Responder resides. The high-order two octets
contain a value sufficient to uniquely identify the MEP
Linktrace Initiator or Linktrace Responder within that system.
For most Bridges, the address of any MAC attached to the
Bridge will suffice for the low-order six octets, and 0 for
the high-order octets. In some situations, e.g., if multiple
virtual Bridges utilizing emulated LANs are implemented in a
single physical system, the high-order two octets can be used
to differentiate among the transmitting entities.
The value returned is undefined if
rcDot1agCfmMepTransmitLtmResult is false.
"
REFERENCE
"802.1ag clause 12.14.7.4.3:b and 21.8.8"
::= { rcDot1agCfmMepEntry 44 }
rcDot1agCfmMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { rcDot1agCfmMepEntry 45 }
-- ******************************************************************
-- The Linktrace Reply Table
-- ******************************************************************
rcDot1agCfmLtrTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmLtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the MEP table and contains a list of
Linktrace replies received by a specific MEP in response to
a linktrace message.
SNMP SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
"
REFERENCE
"802.1ag clause 12.14.7.5"
::= { rcDot1agCfmMep 2 }
rcDot1agCfmLtrEntry OBJECT-TYPE
SYNTAX RcDot1agCfmLtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Linktrace Reply table entry."
INDEX { rcDot1agCfmMdIndex,
rcDot1agCfmMaIndex,
rcDot1agCfmMepIdentifier,
rcDot1agCfmLtrSeqNumber,
rcDot1agCfmLtrReceiveOrder
}
::= { rcDot1agCfmLtrTable 1 }
RcDot1agCfmLtrEntry ::= SEQUENCE {
rcDot1agCfmLtrSeqNumber Unsigned32,
rcDot1agCfmLtrReceiveOrder Unsigned32,
rcDot1agCfmLtrTtl Unsigned32,
rcDot1agCfmLtrForwarded TruthValue,
rcDot1agCfmLtrTerminalMep TruthValue,
rcDot1agCfmLtrLastEgressIdentifier OCTET STRING,
rcDot1agCfmLtrNextEgressIdentifier OCTET STRING,
rcDot1agCfmLtrRelay Dot1agCfmRelayActionFieldValue,
rcDot1agCfmLtrChassisIdSubtype LldpChassisIdSubtype,
rcDot1agCfmLtrChassisId LldpChassisId,
rcDot1agCfmLtrManAddressDomain TDomain,
rcDot1agCfmLtrManAddress TAddress,
rcDot1agCfmLtrIngress Dot1agCfmIngressActionFieldValue,
rcDot1agCfmLtrIngressMac MacAddress,
rcDot1agCfmLtrIngressPortIdSubtype LldpPortIdSubtype,
rcDot1agCfmLtrIngressPortId LldpPortId,
rcDot1agCfmLtrEgress Dot1agCfmEgressActionFieldValue,
rcDot1agCfmLtrEgressMac MacAddress,
rcDot1agCfmLtrEgressPortIdSubtype LldpPortIdSubtype,
rcDot1agCfmLtrEgressPortId LldpPortId,
rcDot1agCfmLtrOrganizationSpecificTlv OCTET STRING
}
rcDot1agCfmLtrSeqNumber
OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Transaction identifier/Sequence number returned by a previous
transmit linktrace message command, indicating which LTM's
response is going to be returned.
"
REFERENCE
"802.1ag clause 12.14.7.5.2:b"
::= { rcDot1agCfmLtrEntry 1}
rcDot1agCfmLtrReceiveOrder
OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value. rcDot1agCfmLtrReceiveOrder
are assigned sequentially from 1, in the order that the
Linktrace Initiator received the LTRs.
"
REFERENCE
"802.1ag clause 12.14.7.5.2:c"
::= { rcDot1agCfmLtrEntry 2 }
rcDot1agCfmLtrTtl
OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TTL field value for a returned LTR."
REFERENCE
"802.1ag clause 12.14.7.5 and 20.36.2.2"
::= { rcDot1agCfmLtrEntry 3 }
rcDot1agCfmLtrForwarded
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if a LTM was forwarded by the responding MP, as
returned in the 'FwdYes' flag of the flags field.
"
REFERENCE
"802.1ag clauses 12.14.7.5.3:c and 20.36.2.1"
::= { rcDot1agCfmLtrEntry 4 }
rcDot1agCfmLtrTerminalMep
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A boolean value stating whether the forwarded LTM reached a
MEP enclosing its MA, as returned in the Terminal MEP flag of
the Flags field.
"
REFERENCE
"802.1ag clauses 12.14.7.5.3:d and 20.36.2.1"
::= { rcDot1agCfmLtrEntry 5 }
rcDot1agCfmLtrLastEgressIdentifier
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet field holding the Last Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR.
The Last Egress Identifier identifies the MEP Linktrace
Initiator that originated, or the Linktrace Responder that
forwarded, the LTM to which this LTR is the response. This
is the same value as the Egress Identifier TLV of that LTM.
"
REFERENCE
"802.1ag clauses 12.14.7.5.3:e and 20.36.2.3"
::= { rcDot1agCfmLtrEntry 6 }
rcDot1agCfmLtrNextEgressIdentifier
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet field holding the Next Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR. The Next Egress
Identifier Identifies the Linktrace Responder that
transmitted this LTR, and can forward the LTM to the next
hop. This is the same value as the Egress Identifier TLV of
the forwarded LTM, if any. If the FwdYes bit of the Flags
field is false, the contents of this field are undefined,
i.e., any value can be transmitted, and the field is ignored
by the receiver.
"
REFERENCE
"802.1ag clauses 12.14.7.5.3:f and 20.36.2.4"
::= { rcDot1agCfmLtrEntry 7 }
rcDot1agCfmLtrRelay
OBJECT-TYPE
SYNTAX Dot1agCfmRelayActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value returned in the Relay Action field."
REFERENCE
"802.1ag clauses 12.14.7.5.3:g and 20.36.2.5"
::= { rcDot1agCfmLtrEntry 8 }
rcDot1agCfmLtrChassisIdSubtype
OBJECT-TYPE
SYNTAX LldpChassisIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the format of the Chassis ID returned
in the Sender ID TLV of the LTR, if any. This value is
meaningless if the rcDot1agCfmLtrChassisId has a length of 0."
REFERENCE
"802.1ag clauses 12.14.7.5.3:h and 21.5.3.2"
::= { rcDot1agCfmLtrEntry 9 }
rcDot1agCfmLtrChassisId
OBJECT-TYPE
SYNTAX LldpChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Chassis ID returned in the Sender ID TLV of the LTR, if
any. The format of this object is determined by the
value of the rcDot1agCfmLtrChassisIdSubtype object.
"
REFERENCE
"802.1ag clauses 12.14.7.5.3:i and 21.5.3.3"
::= { rcDot1agCfmLtrEntry 10 }
rcDot1agCfmLtrManAddressDomain
OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TDomain that identifies the type and format of
the related rcDot1agCfmMepDbManAddress object, used to access
the SNMP agent of the system transmitting the LTR. Received
in the LTR Sender ID TLV from that system.
Typical values will be one of (not all inclusive) list:
snmpUDPDomain (from SNMPv2-TM, RFC3417)
snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)
The value 'zeroDotZero' (from RFC2578) indicates 'no management
address was present in the LTR', in which case the related
object rcDot1agCfmMepDbManAddress must have a zero-length OCTET
STRING as a value.
"
REFERENCE
"802.1ag clauses 12.14.7.5.3:j, 21.5.3.5, 21.9.6"
::= { rcDot1agCfmLtrEntry 11 }
rcDot1agCfmLtrManAddress
OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TAddress that can be used to access the SNMP
agent of the system transmitting the CCM, received in the CCM
Sender ID TLV from that system.
If the related object rcDot1agCfmLtrManAddressDomain contains
the value 'zeroDotZero', this object rcDot1agCfmLtrManAddress
must have a zero-length OCTET STRING as a value.
"
REFERENCE
"802.1ag clauses 12.14.7.5.3:j, 21.5.3.7, 21.9.6"
::= { rcDot1agCfmLtrEntry 12 }
rcDot1agCfmLtrIngress
OBJECT-TYPE
SYNTAX Dot1agCfmIngressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value returned in the Ingress Action Field of the LTM.
The value ingNoTlv(0) indicates that no Reply Ingress TLV was
returned in the LTM."
REFERENCE
"802.1ag clauses 12.14.7.5.3:k and 20.36.2.6"
::= { rcDot1agCfmLtrEntry 13 }
rcDot1agCfmLtrIngressMac
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address returned in the ingress MAC address field.
If the rcDot1agCfmLtrIngress object contains the value
ingNoTlv(0), then the contents of this object are meaningless."
REFERENCE
"802.1ag clauses 12.14.7.5.3:l and 20.36.2.7"
::= { rcDot1agCfmLtrEntry 14 }
rcDot1agCfmLtrIngressPortIdSubtype
OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of the Ingress Port ID.
If the rcDot1agCfmLtrIngress object contains the value
ingNoTlv(0), then the contents of this object are meaningless."
REFERENCE
"802.1ag clauses 12.14.7.5.3:m and 20.36.2.8"
::= { rcDot1agCfmLtrEntry 15 }
rcDot1agCfmLtrIngressPortId
OBJECT-TYPE
SYNTAX LldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress Port ID. The format of this object is determined by
the value of the rcDot1agCfmLtrIngressPortIdSubtype object.
If the rcDot1agCfmLtrIngress object contains the value
ingNoTlv(0), then the contents of this object are meaningless."
REFERENCE
"802.1ag clauses 12.14.7.5.3:n and 20.36.2.9"
::= { rcDot1agCfmLtrEntry 16 }
rcDot1agCfmLtrEgress
OBJECT-TYPE
SYNTAX Dot1agCfmEgressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value returned in the Egress Action Field of the LTM.
The value egrNoTlv(0) indicates that no Reply Egress TLV was
returned in the LTM."
REFERENCE
"802.1ag clauses 12.14.7.5.3:o and 20.36.2.10"
::= { rcDot1agCfmLtrEntry 17 }
rcDot1agCfmLtrEgressMac
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address returned in the egress MAC address field.
If the rcDot1agCfmLtrEgress object contains the value
egrNoTlv(0), then the contents of this object are meaningless."
REFERENCE
"802.1ag clauses 12.14.7.5.3:p and 20.36.2.11"
::= { rcDot1agCfmLtrEntry 18 }
rcDot1agCfmLtrEgressPortIdSubtype
OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of the egress Port ID.
If the rcDot1agCfmLtrEgress object contains the value
egrNoTlv(0), then the contents of this object are meaningless."
REFERENCE
"802.1ag clauses 12.14.7.5.3:q and 20.36.2.12"
::= { rcDot1agCfmLtrEntry 19 }
rcDot1agCfmLtrEgressPortId
OBJECT-TYPE
SYNTAX LldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress Port ID. The format of this object is determined by
the value of the rcDot1agCfmLtrEgressPortIdSubtype object.
If the rcDot1agCfmLtrEgress object contains the value
egrNoTlv(0), then the contents of this object are meaningless."
REFERENCE
"802.1ag clauses 12.14.7.5.3:r and 20.36.2.13"
::= { rcDot1agCfmLtrEntry 20 }
rcDot1agCfmLtrOrganizationSpecificTlv
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0|4..1500))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"All Organization specific TLVs returned in the LTR, if
any. Includes all octets including and following the TLV
Length field of each TLV, concatenated together."
REFERENCE
"802.1ag clauses 12.14.7.5.3:s, 21.5.2"
::= { rcDot1agCfmLtrEntry 21 }
-- ******************************************************************
-- The MEP Database Table
-- ******************************************************************
rcDot1agCfmMepDbTable
OBJECT-TYPE
SYNTAX SEQUENCE OF RcDot1agCfmMepDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MEP Database. A database, maintained by every MEP, that
maintains received information about other MEPs in the
Maintenance Domain.
The SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
"
REFERENCE
"802.1ag clause 19.2.15"
::= { rcDot1agCfmMep 3 }
rcDot1agCfmMepDbEntry OBJECT-TYPE
SYNTAX RcDot1agCfmMepDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MEP Database table entry."
INDEX { rcDot1agCfmMdIndex,
rcDot1agCfmMaIndex,
rcDot1agCfmMepIdentifier,
rcDot1agCfmMepDbRMepIdentifier
}
::= { rcDot1agCfmMepDbTable 1 }
RcDot1agCfmMepDbEntry ::= SEQUENCE {
rcDot1agCfmMepDbRMepIdentifier Dot1agCfmMepId,
rcDot1agCfmMepDbRMepState Dot1agCfmRemoteMepState,
rcDot1agCfmMepDbRMepFailedOkTime TimeStamp,
rcDot1agCfmMepDbMacAddress MacAddress,
rcDot1agCfmMepDbRdi TruthValue,
rcDot1agCfmMepDbPortStatusTlv Dot1agCfmPortStatus,
rcDot1agCfmMepDbInterfaceStatusTlv Dot1agCfmInterfaceStatus,
rcDot1agCfmMepDbChassisIdSubtype LldpChassisIdSubtype,
rcDot1agCfmMepDbChassisId LldpChassisId,
rcDot1agCfmMepDbManAddressDomain TDomain,
rcDot1agCfmMepDbManAddress TAddress
}
rcDot1agCfmMepDbRMepIdentifier
OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maintenance association End Point Identifier of a remote MEP
whose information from the MEP Database is to be returned.
"
REFERENCE
"802.1ag clause 12.14.7.6.2:b"
::= { rcDot1agCfmMepDbEntry 1 }
rcDot1agCfmMepDbRMepState
OBJECT-TYPE
SYNTAX Dot1agCfmRemoteMepState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the remote MEP IFF State machines."
REFERENCE
"802.1ag clause 12.14.7.6.3:b and 20.22"
::= { rcDot1agCfmMepDbEntry 2}
rcDot1agCfmMepDbRMepFailedOkTime
OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (SysUpTime) at which the IFF Remote MEP state machine
last entered either the RMEP_FAILED or RMEP_OK state.
"
REFERENCE
"802.1ag clause 12.14.7.6.3:c"
::= { rcDot1agCfmMepDbEntry 3 }
rcDot1agCfmMepDbMacAddress
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the remote MEP."
REFERENCE
"802.1ag clause 12.14.7.6.3:d and 20.19.7"
::= { rcDot1agCfmMepDbEntry 4 }
rcDot1agCfmMepDbRdi
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the RDI bit in the last received CCM (true for
RDI=1), or false if none has been received.
"
REFERENCE
"802.1ag clauses 12.14.7.6.3:e and 20.19.2"
::= { rcDot1agCfmMepDbEntry 5 }
rcDot1agCfmMepDbPortStatusTlv
OBJECT-TYPE
SYNTAX Dot1agCfmPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerated value of the Port status TLV received in the
last CCM from the remote MEP or the default value
psNoPortStateTLV indicating either no CCM has been received,
or that nor port status TLV was received in the last CCM.
"
REFERENCE
"802.1ag clause 12.14.7.6.3:f and 20.19.3"
DEFVAL { psNoPortStateTLV }
::= { rcDot1agCfmMepDbEntry 6}
rcDot1agCfmMepDbInterfaceStatusTlv
OBJECT-TYPE
SYNTAX Dot1agCfmInterfaceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerated value of the Interface status TLV received
in the last CCM from the remote MEP or the default value
isNoInterfaceStatus TLV indicating either no CCM has been
received, or that no interface status TLV was received in
the last CCM.
"
REFERENCE
"802.1ag clause 12.14.7.6.3:g and 20.19.4"
DEFVAL { isNoInterfaceStatusTLV }
::= { rcDot1agCfmMepDbEntry 7}
rcDot1agCfmMepDbChassisIdSubtype
OBJECT-TYPE
SYNTAX LldpChassisIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the format of the Chassis ID received
in the last CCM."
REFERENCE
"802.1ag clauses 12.14.7.6.3:h and 21.5.3.2"
::= { rcDot1agCfmMepDbEntry 8 }
rcDot1agCfmMepDbChassisId
OBJECT-TYPE
SYNTAX LldpChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Chassis ID. The format of this object is determined by the
value of the rcDot1agCfmLtrChassisIdSubtype object.
"
REFERENCE
"802.1ag clauses 12.14.7.6.3:h and 21.5.3.3"
::= { rcDot1agCfmMepDbEntry 9 }
rcDot1agCfmMepDbManAddressDomain
OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TDomain that identifies the type and format of
the related rcDot1agCfmMepDbManAddress object, used to access
the SNMP agent of the system transmitting the CCM. Received
in the CCM Sender ID TLV from that system.
Typical values will be one of (not all inclusive) list:
snmpUDPDomain (from SNMPv2-TM, RFC3417)
snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)
The value 'zeroDotZero' (from RFC2578) indicates 'no management
address was present in the LTR', in which case the related
object rcDot1agCfmMepDbManAddress must have a zero-length OCTET
STRING as a value.
"
REFERENCE
"802.1ag clauses 12.14.7.6.3:h, 21.5.3.5, 21.6.7"
::= { rcDot1agCfmMepDbEntry 10 }
rcDot1agCfmMepDbManAddress
OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TAddress that can be used to access the SNMP
agent of the system transmitting the CCM, received in the CCM
Sender ID TLV from that system.
If the related object rcDot1agCfmMepDbManAddressDomain contains
the value 'zeroDotZero', this object rcDot1agCfmMepDbManAddress
must have a zero-length OCTET STRING as a value.
"
REFERENCE
"802.1ag clauses 12.14.7.6.3:h, 21.5.3.7, 21.6.7"
::= { rcDot1agCfmMepDbEntry 11 }
-- ******************************************************************
-- NOTIFICATIONS (TRAPS)
-- These notifications will be sent to the management entity
-- whenever a MEP loses/restores contact with one or more other MEPs.
-- ******************************************************************
rcDot1agCfmFaultAlarm
NOTIFICATION-TYPE
OBJECTS { rcDot1agCfmMepHighestPrDefect
}
STATUS current
DESCRIPTION
"A MEP has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Whenever a MEP has a persistent defect,
it may or may not generate a Fault Alarm to warn the system
administrator of the problem, as controlled by the MEP
Fault Notification Generator State Machine and associated
Managed Objects. Only the highest-priority defect, as shown
in Table 20-1, is reported in the Fault Alarm.
If a defect with a higher priority is raised after a Fault
Alarm has been issued, another Fault Alarm is issued.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the MEP reporting the defect
by the indices in the OID of the rcDot1agCfmMepHighestPrDefect
variable in the notification:
rcDot1agCfmMdIndex - Also the index of the MEP's
Maintenance Domain table entry
(rcDot1agCfmMdTable).
rcDot1agCfmMaIndex - Also an index (with the MD table index)
of the MEP's Maintenance Association
network table entry
(rcDot1agCfmMaNetTable), and (with the MD
table index and component ID) of the
MEP's MA component table entry
(rcDot1agCfmMaCompTable).
rcDot1agCfmMepIdentifier - MEP Identifier and final index
into the MEP table (rcDot1agCfmMepTable).
"
REFERENCE
"802.1ag clause 12.14.7.7"
::= { rcDot1agNotifications 1 }
-- ******************************************************************
-- IEEE 802.1ag MIB Module - Conformance Information
-- ******************************************************************
rcDot1agCfmCompliances OBJECT IDENTIFIER ::= { rcDot1agCfmConformance 1 }
rcDot1agCfmGroups OBJECT IDENTIFIER ::= { rcDot1agCfmConformance 2 }
-- ******************************************************************
-- Units of conformance
-- ******************************************************************
rcDot1agCfmStackGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmStackMdIndex,
rcDot1agCfmStackMaIndex,
rcDot1agCfmStackMepId,
rcDot1agCfmStackMacAddress
}
STATUS current
DESCRIPTION
"Objects for the Stack group."
::= { rcDot1agCfmGroups 1 }
rcDot1agCfmDefaultMdGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmDefaultMdDefLevel,
rcDot1agCfmDefaultMdDefMhfCreation,
rcDot1agCfmDefaultMdDefIdPermission,
rcDot1agCfmDefaultMdStatus,
rcDot1agCfmDefaultMdLevel,
rcDot1agCfmDefaultMdMhfCreation,
rcDot1agCfmDefaultMdIdPermission
}
STATUS current
DESCRIPTION
"Objects for the Default MD Level group."
::= { rcDot1agCfmGroups 2 }
rcDot1agCfmVlanIdGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmVlanPrimaryVid,
rcDot1agCfmVlanRowStatus
}
STATUS current
DESCRIPTION
"Objects for the VLAN ID group."
::= { rcDot1agCfmGroups 3 }
rcDot1agCfmConfigErrorListGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmConfigErrorListErrorType
}
STATUS current
DESCRIPTION
"Objects for the CFM Configuration Error List Group."
::= {rcDot1agCfmGroups 4 }
rcDot1agCfmMdGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmMdTableNextIndex,
rcDot1agCfmMdName,
rcDot1agCfmMdFormat,
rcDot1agCfmMdMdLevel,
rcDot1agCfmMdMhfCreation,
rcDot1agCfmMdMhfIdPermission,
rcDot1agCfmMdMaNextIndex,
rcDot1agCfmMdRowStatus
}
STATUS current
DESCRIPTION
"Objects for the Maintenance Domain Group."
::={rcDot1agCfmGroups 5 }
rcDot1agCfmMaGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmMaNetFormat,
rcDot1agCfmMaNetName,
rcDot1agCfmMaNetCcmInterval,
rcDot1agCfmMaNetRowStatus,
rcDot1agCfmMaCompPrimaryVlanId,
rcDot1agCfmMaCompMhfCreation,
rcDot1agCfmMaCompIdPermission,
rcDot1agCfmMaCompRowStatus,
rcDot1agCfmMaCompNumberOfVids,
rcDot1agCfmMaMepListRowStatus
}
STATUS current
DESCRIPTION
"Objects for the MA group."
::= { rcDot1agCfmGroups 6 }
rcDot1agCfmMepGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmMepIfIndex,
rcDot1agCfmMepDirection,
rcDot1agCfmMepPrimaryVid,
rcDot1agCfmMepActive,
rcDot1agCfmMepFngState,
rcDot1agCfmMepCciEnabled,
rcDot1agCfmMepCcmLtmPriority,
rcDot1agCfmMepMacAddress,
rcDot1agCfmMepLowPrDef,
rcDot1agCfmMepFngAlarmTime,
rcDot1agCfmMepFngResetTime,
rcDot1agCfmMepHighestPrDefect,
rcDot1agCfmMepDefects,
rcDot1agCfmMepErrorCcmLastFailure,
rcDot1agCfmMepXconCcmLastFailure,
rcDot1agCfmMepCcmSequenceErrors,
rcDot1agCfmMepCciSentCcms,
rcDot1agCfmMepNextLbmTransId,
rcDot1agCfmMepLbrIn,
rcDot1agCfmMepLbrInOutOfOrder,
rcDot1agCfmMepLbrBadMsdu,
rcDot1agCfmMepLtmNextSeqNumber,
rcDot1agCfmMepUnexpLtrIn,
rcDot1agCfmMepLbrOut,
rcDot1agCfmMepTransmitLbmStatus,
rcDot1agCfmMepTransmitLbmDestMacAddress,
rcDot1agCfmMepTransmitLbmDestMepId,
rcDot1agCfmMepTransmitLbmDestIsMepId,
rcDot1agCfmMepTransmitLbmMessages,
rcDot1agCfmMepTransmitLbmDataTlv,
rcDot1agCfmMepTransmitLbmVlanPriority,
rcDot1agCfmMepTransmitLbmVlanDropEnable,
rcDot1agCfmMepTransmitLbmResultOK,
rcDot1agCfmMepTransmitLbmSeqNumber,
rcDot1agCfmMepTransmitLtmStatus,
rcDot1agCfmMepTransmitLtmFlags,
rcDot1agCfmMepTransmitLtmTargetMacAddress,
rcDot1agCfmMepTransmitLtmTargetMepId,
rcDot1agCfmMepTransmitLtmTargetIsMepId,
rcDot1agCfmMepTransmitLtmTtl,
rcDot1agCfmMepTransmitLtmResult,
rcDot1agCfmMepTransmitLtmSeqNumber,
rcDot1agCfmMepTransmitLtmEgressIdentifier,
rcDot1agCfmMepRowStatus,
rcDot1agCfmLtrForwarded,
rcDot1agCfmLtrRelay,
rcDot1agCfmLtrChassisIdSubtype,
rcDot1agCfmLtrChassisId,
rcDot1agCfmLtrManAddress,
rcDot1agCfmLtrManAddressDomain,
rcDot1agCfmLtrIngress,
rcDot1agCfmLtrIngressMac,
rcDot1agCfmLtrIngressPortIdSubtype,
rcDot1agCfmLtrIngressPortId,
rcDot1agCfmLtrEgress,
rcDot1agCfmLtrEgressMac,
rcDot1agCfmLtrEgressPortIdSubtype,
rcDot1agCfmLtrEgressPortId,
rcDot1agCfmLtrTerminalMep,
rcDot1agCfmLtrLastEgressIdentifier,
rcDot1agCfmLtrNextEgressIdentifier,
rcDot1agCfmLtrTtl,
rcDot1agCfmLtrOrganizationSpecificTlv
}
STATUS current
DESCRIPTION
"Objects for the MEP group."
::= { rcDot1agCfmGroups 7 }
rcDot1agCfmMepDbGroup OBJECT-GROUP
OBJECTS {
rcDot1agCfmMepDbRMepState,
rcDot1agCfmMepDbRMepFailedOkTime,
rcDot1agCfmMepDbMacAddress,
rcDot1agCfmMepDbRdi,
rcDot1agCfmMepDbPortStatusTlv,
rcDot1agCfmMepDbInterfaceStatusTlv,
rcDot1agCfmMepDbChassisIdSubtype,
rcDot1agCfmMepDbChassisId,
rcDot1agCfmMepDbManAddressDomain,
rcDot1agCfmMepDbManAddress
}
STATUS current
DESCRIPTION
"Objects for the MEP group."
::= { rcDot1agCfmGroups 8 }
rcDot1agCfmNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
rcDot1agCfmFaultAlarm
}
STATUS current
DESCRIPTION
"Objects for the Notifications group."
::= { rcDot1agCfmGroups 9 }
-- ******************************************************************
-- MIB Module Compliance statements
-- ******************************************************************
rcDot1agCfmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of the CFM MIB module."
MODULE
MANDATORY-GROUPS {
rcDot1agCfmStackGroup,
rcDot1agCfmDefaultMdGroup,
rcDot1agCfmConfigErrorListGroup,
rcDot1agCfmMdGroup,
rcDot1agCfmMaGroup,
rcDot1agCfmMepGroup,
rcDot1agCfmMepDbGroup,
rcDot1agCfmNotificationsGroup
}
GROUP rcDot1agCfmVlanIdGroup
DESCRIPTION "The VLAN ID group is optional."
OBJECT rcDot1agCfmMepLbrBadMsdu
MIN-ACCESS not-accessible
DESCRIPTION "The rcDot1agCfmMepLbrBadMsdu variable is optional. It
must not be present if the system cannot compare a
received LBR to the corresponding LBM."
OBJECT rcDot1agCfmMdRowStatus
SYNTAX RowStatus
DESCRIPTION "Support for createAndWait is not required."
OBJECT rcDot1agCfmMaNetRowStatus
SYNTAX RowStatus
DESCRIPTION "Support for createAndWait is not required."
OBJECT rcDot1agCfmMaCompRowStatus
SYNTAX RowStatus
DESCRIPTION "Support for createAndWait is not required."
OBJECT rcDot1agCfmVlanRowStatus
SYNTAX RowStatus
DESCRIPTION "Support for createAndWait is not required."
OBJECT rcDot1agCfmMaMepListRowStatus
SYNTAX RowStatus
DESCRIPTION "Support for createAndWait is not required."
OBJECT rcDot1agCfmMepRowStatus
SYNTAX RowStatus
DESCRIPTION "Support for createAndWait is not required."
::= { rcDot1agCfmCompliances 1 }
END
View Git Blame Copy Permalink