WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/radware/ALTEON-CS-PHYSICAL-MIB

4574 lines
130 KiB
Plaintext
Raw Permalink Blame History

-- COPYRIGHT NOTICE
-- Copyright (c) Radware Ltd. 2009
-- All rights reserved
ALTEON-CS-PHYSICAL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, TimeTicks,
Unsigned32
FROM SNMPv2-SMI
DisplayString, PhysAddress
FROM SNMPv2-TC
BridgeId
FROM BRIDGE-MIB
aws-switch
FROM ALTEON-ROOT-MIB;
layer2 MODULE-IDENTITY
LAST-UPDATED "200908050000Z" -- 5 August, 2009
ORGANIZATION "Radware Ltd."
CONTACT-INFO "Lobby 1 (Visitors) and Lobby 2 (Deliveries)
575 Corporate Drive
Mahwah, NJ 07430
support@radware.com"
DESCRIPTION
"The MIB module for the Alteon OS Layer2 configuration, statistics and
information ."
REVISION "200908050000Z" -- 5 August, 2009
DESCRIPTION
"Added revision clause for SMIv2 compliance."
::= { aws-switch 2 }
layer2Configs OBJECT IDENTIFIER ::= { layer2 1 }
layer2Stats OBJECT IDENTIFIER ::= { layer2 2 }
layer2Info OBJECT IDENTIFIER ::= { layer2 3 }
layer2Oper OBJECT IDENTIFIER ::= { layer2 4 }
vlan OBJECT IDENTIFIER ::= { layer2Configs 1 }
trunkgroup OBJECT IDENTIFIER ::= { layer2Configs 2 }
stgCfg OBJECT IDENTIFIER ::= { layer2Configs 3 }
mirroring OBJECT IDENTIFIER ::= { layer2Configs 4 }
lacp OBJECT IDENTIFIER ::= { layer2Configs 5 }
mstCfg OBJECT IDENTIFIER ::= { layer2Configs 7 }
portTeamCfg OBJECT IDENTIFIER ::= { layer2Configs 9 }
hwBypassConfig OBJECT IDENTIFIER ::= { layer2Configs 11 }
mirrPortMirr OBJECT IDENTIFIER ::= { mirroring 1 }
mstGeneralCfg OBJECT IDENTIFIER ::= { mstCfg 1 }
mstCistCfg OBJECT IDENTIFIER ::= { mstCfg 2 }
vadcVlan OBJECT IDENTIFIER ::= { layer2Configs 10 }
lldp OBJECT IDENTIFIER ::= { layer2Configs 12 }
mtuCfg OBJECT IDENTIFIER ::= { layer2Configs 13 }
fdbStats OBJECT IDENTIFIER ::= { layer2Stats 1 }
stpStats OBJECT IDENTIFIER ::= { layer2Stats 2 }
fdbInfo OBJECT IDENTIFIER ::= { layer2Info 1 }
stpInfo OBJECT IDENTIFIER ::= { layer2Info 2 }
lacpInfo OBJECT IDENTIFIER ::= { layer2Info 3 }
cistInfo OBJECT IDENTIFIER ::= { layer2Info 4 }
vlanInfo OBJECT IDENTIFIER ::= { layer2Info 5 }
cistGeneralInfo OBJECT IDENTIFIER ::= { cistInfo 1 }
portTeamInfo OBJECT IDENTIFIER ::= { layer2Info 6 }
-- VLAN group
vlanMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the VLAN configuration table,
Note:This mib is supported only for VX instance of Virtualization."
::= { vlan 1 }
vlanMaxVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum allowed VLAN ID,
Note:This mib is supported only for VX instance of Virtualization."
::= { vlan 4 }
vlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration,
Note:This mib is supported only for VX instance of Virtualization."
::= { vlan 2 }
vlanCurCfgTableEntry OBJECT-TYPE
SYNTAX VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanCurCfgVlanId }
::= { vlanCurCfgTable 1 }
VlanCurCfgTableEntry ::= SEQUENCE {
vlanCurCfgVlanId Integer32,
vlanCurCfgPorts OCTET STRING,
vlanCurCfgState INTEGER,
vlanCurCfgBwmContract Integer32,
vlanCurCfgStg Integer32,
vlanCurCfgJumbo INTEGER,
vlanCurCfgLearn INTEGER,
vlanCurCfgShared INTEGER,
vlanCurCfgIpv6LlaGen INTEGER,
vlanCurCfgRouterAdv INTEGER,
vlanCurCfgReTransInt Unsigned32,
vlanCurCfgMinIntBwAdv INTEGER,
vlanCurCfgMaxIntBwAdv INTEGER,
vlanCurCfgMtu INTEGER,
vlanCurCfgCurHopLimit INTEGER,
vlanCurCfgMFlag INTEGER,
vlanCurCfgOFlag INTEGER,
vlanCurCfgRTime INTEGER,
vlanCurCfgRlTime INTEGER,
vlanCurCfgPlTime Unsigned32,
vlanCurCfgVlTime Unsigned32,
vlanCurCfgOpInfo INTEGER,
vlanCurCfgApInfo INTEGER,
vlanCurCfgIpv6Lla DisplayString,
vlanCurCfgVlanName DisplayString
}
vlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier,
Note:This mib is supported only for VX instance of Virtualization."
::= { vlanCurCfgTableEntry 1 }
vlanCurCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanCurCfgTableEntry 2 }
vlanCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanCurCfgTableEntry 3 }
vlanCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanCurCfgTableEntry 4 }
vlanCurCfgBwmContract OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default contract number the VLAN "
::= { vlanCurCfgTableEntry 5 }
vlanCurCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanCurCfgTableEntry 6 }
vlanCurCfgJumbo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Jumbo frames on a VLAN"
::= { vlanCurCfgTableEntry 7 }
vlanCurCfgLearn OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable source MAC address learning on a VLAN"
::= { vlanCurCfgTableEntry 8 }
vlanCurCfgShared OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable shared property of a VLAN,
This mib is supported only on VX platform."
::= { vlanCurCfgTableEntry 9 }
vlanCurCfgIpv6LlaGen OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable IPv6 Link Local Address Generation,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 10 }
vlanCurCfgRouterAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable router advertisement,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 11 }
vlanCurCfgReTransInt OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmission interval,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 12 }
vlanCurCfgMinIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 3 .. 1800 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum interval between router advertisements,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 13 }
vlanCurCfgMaxIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 4 .. 1800 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum interval between router advertisements,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 14 }
vlanCurCfgMtu OBJECT-TYPE
SYNTAX INTEGER ( 1200 .. 1500 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Transmission Unit. Enter 0 for None,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 15 }
vlanCurCfgCurHopLimit OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 255 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current hop limit field,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 16 }
vlanCurCfgMFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable Managed address configuration flag,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 17 }
vlanCurCfgOFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable Other address configuration flag,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 18 }
vlanCurCfgRTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 3600000 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reachable time,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 19 }
vlanCurCfgRlTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 9000 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Life Time.Enter 0 for None,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 20 }
vlanCurCfgPlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Preferred life time,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 21 }
vlanCurCfgVlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid life time,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 22 }
vlanCurCfgOpInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable On-link flag in prefix,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 23 }
vlanCurCfgApInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable Autonomous address configuration flag in prefix,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 24 }
vlanCurCfgIpv6Lla OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPV6 Link Local Address,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanCurCfgTableEntry 25 }
vlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration,
Note:This mib is supported only for VX instance of Virtualization."
::= { vlan 3 }
vlanNewCfgTableEntry OBJECT-TYPE
SYNTAX VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanNewCfgVlanId }
::= { vlanNewCfgTable 1 }
VlanNewCfgTableEntry ::= SEQUENCE {
vlanNewCfgVlanId Integer32,
vlanNewCfgVlanName DisplayString,
vlanNewCfgPorts OCTET STRING,
vlanNewCfgState INTEGER,
vlanNewCfgAddPort Integer32,
vlanNewCfgRemovePort Integer32,
vlanNewCfgBwmContract Integer32,
vlanNewCfgStg Integer32,
vlanNewCfgJumbo INTEGER,
vlanNewCfgLearn INTEGER,
vlanNewCfgShared INTEGER,
vlanNewCfgIpv6LlaGen INTEGER,
vlanNewCfgRouterAdv INTEGER,
vlanNewCfgReTransInt Unsigned32,
vlanNewCfgMinIntBwAdv INTEGER,
vlanNewCfgMaxIntBwAdv INTEGER,
vlanNewCfgMtu INTEGER,
vlanNewCfgCurHopLimit INTEGER,
vlanNewCfgMFlag INTEGER,
vlanNewCfgOFlag INTEGER,
vlanNewCfgRTime INTEGER,
vlanNewCfgRlTime INTEGER,
vlanNewCfgPlTime Unsigned32,
vlanNewCfgVlTime Unsigned32,
vlanNewCfgOpInfo INTEGER,
vlanNewCfgApInfo INTEGER,
vlanNewCfgIpv6Lla DisplayString,
vlanNewCfgDelete INTEGER
}
vlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier,
Note:This mib is supported only for VX instance of Virtualization."
::= { vlanNewCfgTableEntry 1 }
vlanNewCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanNewCfgTableEntry 2 }
vlanNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanNewCfgTableEntry 3 }
vlanNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanNewCfgTableEntry 4 }
vlanNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to the specified VLAN. A '0' value is
returned when read."
::= { vlanNewCfgTableEntry 5 }
vlanNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from the specified VLAN. A '0'
value is returned when read."
::= { vlanNewCfgTableEntry 6 }
vlanNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN"
::= { vlanNewCfgTableEntry 7 }
vlanNewCfgBwmContract OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default contract number for the VLAN."
::= { vlanNewCfgTableEntry 8 }
vlanNewCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanNewCfgTableEntry 9 }
vlanNewCfgJumbo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable Jumbo frames on a VLAN"
::= { vlanNewCfgTableEntry 10 }
vlanNewCfgLearn OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable source mac address learning on a VLAN"
::= { vlanNewCfgTableEntry 11 }
vlanNewCfgShared OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable shared property of a VLAN,
This mib is supported only on VX platform."
::= { vlanNewCfgTableEntry 12 }
vlanNewCfgIpv6LlaGen OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable IPv6 Link Local Address Generation,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 13 }
vlanNewCfgRouterAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable router advertisement,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 14 }
vlanNewCfgReTransInt OBJECT-TYPE
SYNTAX Unsigned32 ( 0..4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmission interval,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 15 }
vlanNewCfgMinIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 3 .. 1800 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum interval between router advertisements,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 16 }
vlanNewCfgMaxIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 4 .. 1800 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum interval between router advertisements,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 17 }
vlanNewCfgMtu OBJECT-TYPE
SYNTAX INTEGER ( 1200 .. 1500 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Transmission Unit. Enter 0 for None,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 18 }
vlanNewCfgCurHopLimit OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 255 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current hop limit field,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 19 }
vlanNewCfgMFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable Managed address configuration flag,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 20 }
vlanNewCfgOFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable Other address configuration flag,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 21 }
vlanNewCfgRTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 3600000 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reachable time,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 22 }
vlanNewCfgRlTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 9000 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Life Time.Enter 0 for None,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 23 }
vlanNewCfgPlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Preferred life time,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 24 }
vlanNewCfgVlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0..4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Valid life time,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 25 }
vlanNewCfgOpInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable On-link flag in prefix,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 26 }
vlanNewCfgApInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable Autonomous address configuration flag in prefix,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 27 }
vlanNewCfgIpv6Lla OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPV6 Link Local Address,
This mib is supported only on VA and Stand Alone platforms."
::= { vlanNewCfgTableEntry 28 }
-- Link Aggregation Control Protocol Group
lacpCurSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 1 }
lacpNewSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 2 }
lacpCurSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 5 }
lacpNewSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 6 }
lacpCurPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 7 }
lacpCurPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpCurPortCfgTableId }
::= { lacpCurPortCfgTable 1 }
LacpCurPortCfgTableEntry ::= SEQUENCE {
lacpCurPortCfgTableId Integer32,
lacpCurPortState INTEGER,
lacpCurPortActorPortPriority INTEGER,
lacpCurPortActorAdminKey INTEGER
}
lacpCurPortCfgTableId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpCurPortCfgTableEntry 1 }
lacpCurPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpCurPortCfgTableEntry 2 }
lacpCurPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-only."
::= { lacpCurPortCfgTableEntry 3 }
lacpCurPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance."
::= { lacpCurPortCfgTableEntry 4 }
lacpNewPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 8 }
lacpNewPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpNewPortCfgTableId }
::= { lacpNewPortCfgTable 1 }
LacpNewPortCfgTableEntry ::= SEQUENCE {
lacpNewPortCfgTableId Integer32,
lacpNewPortState INTEGER,
lacpNewPortActorPortPriority INTEGER,
lacpNewPortActorAdminKey INTEGER
}
lacpNewPortCfgTableId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpNewPortCfgTableEntry 1 }
lacpNewPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpNewPortCfgTableEntry 2 }
lacpNewPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { lacpNewPortCfgTableEntry 3 }
lacpNewPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance."
::= { lacpNewPortCfgTableEntry 4 }
lacpCurSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP System Name"
::= { lacp 9 }
lacpNewSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP System Name"
::= { lacp 10 }
lacpCurBlockPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current setting for blocking traffic on ports when not in Link Aggregation Group"
::= { lacp 11 }
lacpNewBlockPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Block(1)/Forward(2) traffic on ports when not in Link Aggregation Group"
::= { lacp 12 }
-- Trunk Group Group
trunkGroupTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in trunk group table,
This mib is not supported on vADC platform."
::= { trunkgroup 1 }
trunkGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration,
This mib is not supported on vADC platform."
::= { trunkgroup 2 }
trunkGroupCurCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table,
This mib is not supported on vADC platform."
INDEX { trunkGroupCurCfgIndex }
::= { trunkGroupCurCfgTable 1 }
TrunkGroupCurCfgTableEntry ::= SEQUENCE {
trunkGroupCurCfgIndex Integer32,
trunkGroupCurCfgPorts OCTET STRING,
trunkGroupCurCfgBwmContract Integer32,
trunkGroupCurCfgState INTEGER,
trunkGroupCurCfgName DisplayString,
trunkGroupCurCfgPortCount Integer32
}
trunkGroupCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupCurCfgTableEntry 1 }
trunkGroupCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group
This mib is not supported on vADC platform."
::= { trunkGroupCurCfgTableEntry 2 }
trunkGroupCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupCurCfgTableEntry 3 }
trunkGroupCurCfgBwmContract OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default BW contract of a trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupCurCfgTableEntry 4 }
trunkGroupCurCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of a trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupCurCfgTableEntry 6 }
trunkGroupCurCfgPortCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ports configured in trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupCurCfgTableEntry 7 }
trunkGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration,
This mib is not supported on vADC platform."
::= { trunkgroup 3 }
trunkGroupNewCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table,
This mib is not supported on vADC platform."
INDEX { trunkGroupNewCfgIndex }
::= { trunkGroupNewCfgTable 1 }
TrunkGroupNewCfgTableEntry ::= SEQUENCE {
trunkGroupNewCfgIndex Integer32,
trunkGroupNewCfgPorts OCTET STRING,
trunkGroupNewCfgAddPort Integer32,
trunkGroupNewCfgRemovePort Integer32,
trunkGroupNewCfgState INTEGER,
trunkGroupNewCfgBwmContract Integer32,
trunkGroupNewCfgDelete INTEGER,
trunkGroupNewCfgName DisplayString,
trunkGroupNewCfgPortCount Integer32
}
trunkGroupNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 1 }
trunkGroupNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 2 }
trunkGroupNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added in the trunk group. When read, 0 is returned,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 3 }
trunkGroupNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be deleted from the trunk group. when read, 0
is returned,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 4 }
trunkGroupNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 5 }
trunkGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 6 }
trunkGroupNewCfgBwmContract OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default BW contract of a trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 7 }
trunkGroupNewCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of a trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 9 }
trunkGroupNewCfgPortCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ports configured in trunk group,
This mib is not supported on vADC platform."
::= { trunkGroupNewCfgTableEntry 10 }
-- Spanning Tree Group Configuration
-- This group specifies the additional configurations that are not
-- covered by the Bridge MIB (RFC 1493).
-- The relative Spanning Tree information can be retrieved or configured
-- using Bridge MIB with an unique community string for each group specified
-- in entLogicalTable of Entity MIB (RFC 2037).
--
stgCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group configuration,
This mib is not supported on vADC platform."
::= { stgCfg 1 }
stgCurCfgTableEntry OBJECT-TYPE
SYNTAX StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration,
This mib is not supported on vADC platform."
INDEX { stgCurCfgIndex }
::= { stgCurCfgTable 1 }
StgCurCfgTableEntry ::= SEQUENCE {
stgCurCfgIndex Integer32,
stgCurCfgState INTEGER,
stgCurCfgPriority INTEGER,
stgCurCfgBrgHelloTime INTEGER,
stgCurCfgBrgForwardDelay INTEGER,
stgCurCfgBrgMaxAge INTEGER,
stgCurCfgAgingTime INTEGER,
stgCurCfgVlanBmap OCTET STRING,
stgCurCfgUntagPvst INTEGER,
stgCurCfgVlanListType INTEGER,
stgCurCfgVlanBmap3 OCTET STRING
}
stgCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 1 }
stgCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 2 }
stgCurCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 5 }
stgCurCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 6 }
stgCurCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 7 }
stgCurCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 8 }
stgCurCfgAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out dynamically learned
forwarding information,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 9 }
stgCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 10 }
stgCurCfgUntagPvst OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable sending PVST frames on untagged ports,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 11 }
stgCurCfgVlanListType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
listall(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default or ListAll list available vlan or entire vlan range,
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 12 }
stgCurCfgVlanBmap3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree
This mib is not supported on vADC platform."
::= { stgCurCfgTableEntry 13 }
stgNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Groups configuration in the new_config,
This mib is not supported on vADC platform."
::= { stgCfg 2 }
stgNewCfgTableEntry OBJECT-TYPE
SYNTAX StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration,
This mib is not supported on vADC platform."
INDEX { stgNewCfgIndex }
::= { stgNewCfgTable 1 }
StgNewCfgTableEntry ::= SEQUENCE {
stgNewCfgIndex Integer32,
stgNewCfgState INTEGER,
stgNewCfgDefaultCfg INTEGER,
stgNewCfgAddVlan Integer32,
stgNewCfgRemoveVlan Integer32,
stgNewCfgPriority INTEGER,
stgNewCfgBrgHelloTime INTEGER,
stgNewCfgBrgForwardDelay INTEGER,
stgNewCfgBrgMaxAge INTEGER,
stgNewCfgAgingTime INTEGER,
stgNewCfgVlanBmap OCTET STRING,
stgNewCfgUntagPvst INTEGER,
stgNewCfgVlanListType INTEGER,
stgNewCfgVlanBmap3 OCTET STRING
}
stgNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 1 }
stgNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 2 }
stgNewCfgDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default-config(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 3 }
stgNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read,
This mib is not supported on vADC platform."
::= {stgNewCfgTableEntry 4 }
stgNewCfgRemoveVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 5 }
stgNewCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 8 }
stgNewCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 9 }
stgNewCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 10 }
stgNewCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 11 }
stgNewCfgAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out dynamically learned
forwarding information,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 12 }
stgNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 13 }
stgNewCfgUntagPvst OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable sending PVST frames on untagged ports,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 14 }
stgNewCfgVlanListType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
listall(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default or ListAll list available vlan or entire vlan range,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 15 }
stgNewCfgVlanBmap3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree,
This mib is not supported on vADC platform."
::= { stgNewCfgTableEntry 16 }
stgCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
current_config,
This mib is not supported on vADC platform."
::= { stgCfg 3 }
stgCurCfgPortTableEntry OBJECT-TYPE
SYNTAX StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group,
This mib is not supported on vADC platform."
INDEX { stgCurCfgStgIndex, stgCurCfgPortIndex }
::= { stgCurCfgPortTable 1 }
StgCurCfgPortTableEntry ::= SEQUENCE {
stgCurCfgStgIndex Integer32,
stgCurCfgPortIndex Integer32,
stgCurCfgPortPriority INTEGER,
stgCurCfgPortPathCost Integer32,
stgCurCfgPortLink INTEGER,
stgCurCfgPortEdge INTEGER,
stgCurCfgPortState INTEGER,
stgCurCfgBlockBPDU INTEGER
}
stgCurCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 1 }
stgCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 2 }
stgCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 3 }
stgCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID,
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 4 }
stgCurCfgPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (if MSTP/RSTP is enabled
range is (0..200000000) else range is (0..65535) ),
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 5 }
stgCurCfgPortLink OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the port link,
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 6 }
stgCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port edge,
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 7 }
stgCurCfgBlockBPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable forwarding bpdu's on STG off. To 'enable' this,
STG and Port's Spanning Tree should be in 'off' state,
This mib is not supported on vADC platform."
::= { stgCurCfgPortTableEntry 8 }
stgNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
new_config,
This mib is not supported on vADC platform."
::= { stgCfg 4 }
stgNewCfgPortTableEntry OBJECT-TYPE
SYNTAX StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group,
This mib is not supported on vADC platform."
INDEX { stgNewCfgStgIndex, stgNewCfgPortIndex }
::= { stgNewCfgPortTable 1 }
StgNewCfgPortTableEntry ::= SEQUENCE {
stgNewCfgStgIndex Integer32,
stgNewCfgPortIndex Integer32,
stgNewCfgPortPriority INTEGER,
stgNewCfgPortPathCost Integer32,
stgNewCfgPortLink INTEGER,
stgNewCfgPortEdge INTEGER,
stgNewCfgPortState INTEGER,
stgNewCfgBlockBPDU INTEGER
}
stgNewCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 1 }
stgNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 2 }
stgNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group,
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 3 }
stgNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID,
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 4 }
stgNewCfgPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (if MSTP/RSTP is enabled
range is (0..200000000) else range is (0..65535) ),
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 5 }
stgNewCfgPortLink OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the port link,
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 6 }
stgNewCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of port edge,
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 7 }
stgNewCfgBlockBPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable forwarding bpdu's on STG off. To 'enable' this,
STG and Port's Spanning Tree should be in 'off' state,
This mib is not supported on vADC platform."
::= { stgNewCfgPortTableEntry 8 }
stgVlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgVlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of All VLANs supported."
::= { vlan 5 }
stgVlanCurCfgTableEntry OBJECT-TYPE
SYNTAX StgVlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { stgVlanCurCfgVlanId }
::= { stgVlanCurCfgTable 1 }
StgVlanCurCfgTableEntry ::= SEQUENCE {
stgVlanCurCfgVlanId Integer32,
stgVlanCurCfgVlanName DisplayString
}
stgVlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { stgVlanCurCfgTableEntry 1 }
stgVlanCurCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { stgVlanCurCfgTableEntry 2 }
stgVlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgVlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of All VLANs supported."
::= { vlan 6 }
stgVlanNewCfgTableEntry OBJECT-TYPE
SYNTAX StgVlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { stgVlanNewCfgVlanId }
::= { stgVlanNewCfgTable 1 }
StgVlanNewCfgTableEntry ::= SEQUENCE {
stgVlanNewCfgVlanId Integer32,
stgVlanNewCfgVlanName DisplayString
}
stgVlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { stgVlanNewCfgTableEntry 1 }
stgVlanNewCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { stgVlanNewCfgTableEntry 2 }
-- Complete Port Mirroring
pmCurCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 1 }
pmNewCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 2 }
pmCurCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 3 }
pmCurCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmCurCfgPmirrMoniPortIndex, pmCurCfgPmirrMirrPortIndex }
::= { pmCurCfgPortMonitorTable 1 }
PmCurCfgPortMonitorEntry ::= SEQUENCE {
pmCurCfgPmirrMoniPortIndex Integer32,
pmCurCfgPmirrMirrPortIndex Integer32,
pmCurCfgPmirrDirection INTEGER,
pmCurCfgPmirrPortVlansBmap OCTET STRING
}
pmCurCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmCurCfgPortMonitorEntry 1 }
pmCurCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmCurCfgPortMonitorEntry 2 }
pmCurCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmCurCfgPortMonitorEntry 3 }
pmCurCfgPmirrPortVlansBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored VLANs (1-4096) list for the port. The VLANs are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented VLAN is being mirrored.
0 - The represented VLAN is not being mirrored.
Note: When all octets are zero - all vlan(s) traffic is
being for the port"
::= { pmCurCfgPortMonitorEntry 6 }
pmNewCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 4 }
pmNewCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
::= { pmNewCfgPortMonitorTable 1 }
PmNewCfgPortMonitorEntry ::= SEQUENCE {
pmNewCfgPmirrMoniPortIndex Integer32,
pmNewCfgPmirrMirrPortIndex Integer32,
pmNewCfgPmirrDirection INTEGER,
pmNewCfgPmirrDelete INTEGER,
pmNewCfgAddVlan Integer32,
pmNewCfgRemoveVlan Integer32,
pmNewCfgPmirrPortVlansBmap OCTET STRING
}
pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmNewCfgPortMonitorEntry 1 }
pmNewCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmNewCfgPortMonitorEntry 2 }
pmNewCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmNewCfgPortMonitorEntry 3 }
pmNewCfgPmirrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 4 }
pmNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN whose traffic is to be mirrored for this port.
A '0' value is returned when read."
::= { pmNewCfgPortMonitorEntry 7 }
pmNewCfgRemoveVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN whose traffic will no longer to be mirrored.
A '0' value is returned when read."
::= { pmNewCfgPortMonitorEntry 8 }
pmNewCfgPmirrPortVlansBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored VLANs(1-4096) list for the port. The VLANs are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented VLAN is being mirrored.
0 - The represented VLAN is not being mirrored.
Note: All octets are zero means all vlan(s) traffic is
being mirrored for the port"
::= { pmNewCfgPortMonitorEntry 9 }
-- MST Configuration
mstCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable MSTP/RSTP"
::= { mstGeneralCfg 1 }
mstNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable MSTP/RSTP"
::= { mstGeneralCfg 2 }
mstCurCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 3 }
mstNewCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 4 }
mstCurCfgRegionVersion OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstGeneralCfg 5 }
mstNewCfgRegionVersion OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstGeneralCfg 6 }
mstCurCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 7 }
mstNewCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 8 }
mstCurCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 9 }
mstNewCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 10 }
mstCistDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything."
::= { mstCistCfg 1 }
-- CIST Brige Configuration
mstCistBridgeCfg OBJECT IDENTIFIER ::= { mstCistCfg 2 }
mstCistCurCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 1 }
mstCistNewCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 2 }
mstCistCurCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 5 }
mstCistNewCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 6 }
mstCistCurCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 7 }
mstCistNewCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 8 }
-- CIST Port Configuration
mstCistCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 3 }
mstCistCurCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistCurCfgPortIndex }
::= { mstCistCurCfgPortTable 1 }
MstCistCurCfgPortTableEntry ::= SEQUENCE {
mstCistCurCfgPortIndex Integer32,
mstCistCurCfgPortPriority INTEGER,
mstCistCurCfgPortPathCost INTEGER,
mstCistCurCfgPortLinkType INTEGER,
mstCistCurCfgPortEdge INTEGER,
mstCistCurCfgPortStpState INTEGER,
mstCistCurCfgPortHelloTime INTEGER
}
mstCistCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistCurCfgPortTableEntry 1 }
mstCistCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistCurCfgPortTableEntry 2 }
mstCistCurCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistCurCfgPortTableEntry 3 }
mstCistCurCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { mstCistCurCfgPortTableEntry 4 }
mstCistCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Edge Port parameter."
::= { mstCistCurCfgPortTableEntry 5 }
mstCistCurCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistCurCfgPortTableEntry 6 }
mstCistCurCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistCurCfgPortTableEntry 7 }
mstCistNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 4 }
mstCistNewCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistNewCfgPortIndex }
::= { mstCistNewCfgPortTable 1 }
MstCistNewCfgPortTableEntry ::= SEQUENCE {
mstCistNewCfgPortIndex Integer32,
mstCistNewCfgPortPriority INTEGER,
mstCistNewCfgPortPathCost INTEGER,
mstCistNewCfgPortLinkType INTEGER,
mstCistNewCfgPortEdge INTEGER,
mstCistNewCfgPortStpState INTEGER,
mstCistNewCfgPortHelloTime INTEGER
}
mstCistNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistNewCfgPortTableEntry 1 }
mstCistNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistNewCfgPortTableEntry 2 }
mstCistNewCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistNewCfgPortTableEntry 3 }
mstCistNewCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { mstCistNewCfgPortTableEntry 4 }
mstCistNewCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the Edge Port parameter."
::= { mstCistNewCfgPortTableEntry 5 }
mstCistNewCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistNewCfgPortTableEntry 6 }
mstCistNewCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistNewCfgPortTableEntry 7 }
-- Port Team
portTeamTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of port teams."
::= { portTeamCfg 1 }
portTeamCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortTeamCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port team current configuration."
::= { portTeamCfg 2 }
portTeamCurCfgTableEntry OBJECT-TYPE
SYNTAX PortTeamCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port team configuration table."
INDEX { portTeamCurCfgIndex }
::= { portTeamCurCfgTable 1 }
PortTeamCurCfgTableEntry ::= SEQUENCE {
portTeamCurCfgIndex Integer32,
portTeamCurCfgState INTEGER,
portTeamCurCfgPorts OCTET STRING,
portTeamCurCfgTrunks OCTET STRING,
portTeamCurCfgName DisplayString
}
portTeamCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the port team."
::= { portTeamCurCfgTableEntry 1 }
portTeamCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a port team."
::= { portTeamCurCfgTableEntry 2 }
portTeamCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the port team. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8
| ||
| ||___ port 7
| |____ port 6
| . . .
|_________ port 1
where x : 1 - The represented port belongs to the port team
0 - The represented port does not belong to the port team"
::= { portTeamCurCfgTableEntry 3 }
portTeamCurCfgTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk list in the port team. The trunks are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8
| ||
| ||___ trunk 7
| |____ trunk 6
| . . .
|_________ trunk 1
where x : 1 - The represented trunk belongs to the port team
0 - The represented trunk does not belong to the port team"
::= { portTeamCurCfgTableEntry 4 }
portTeamCurCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Port Team."
::= { portTeamCurCfgTableEntry 5 }
portTeamNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortTeamNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port team new configuration."
::= { portTeamCfg 3 }
portTeamNewCfgTableEntry OBJECT-TYPE
SYNTAX PortTeamNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port team configuration table."
INDEX { portTeamNewCfgIndex }
::= { portTeamNewCfgTable 1 }
PortTeamNewCfgTableEntry ::= SEQUENCE {
portTeamNewCfgIndex Integer32,
portTeamNewCfgState INTEGER,
portTeamNewCfgPorts OCTET STRING,
portTeamNewCfgAddPort Integer32,
portTeamNewCfgRemovePort Integer32,
portTeamNewCfgTrunks OCTET STRING,
portTeamNewCfgAddTrunk Integer32,
portTeamNewCfgRemoveTrunk Integer32,
portTeamNewCfgDelete INTEGER,
portTeamNewCfgName DisplayString
}
portTeamNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the port team."
::= { portTeamNewCfgTableEntry 1 }
portTeamNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a port team."
::= { portTeamNewCfgTableEntry 2 }
portTeamNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the port team. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8
| ||
| ||___ port 7
| |____ port 6
| . . .
|_________ port 1
where x : 1 - The represented port belongs to the port team
0 - The represented port does not belong to the port team"
::= { portTeamNewCfgTableEntry 3 }
portTeamNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added in the port team. When read, 0 is returned."
::= { portTeamNewCfgTableEntry 4 }
portTeamNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be deleted from the port team. When read, 0is returned."
::= { portTeamNewCfgTableEntry 5 }
portTeamNewCfgTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk list in the port team. The trunks are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8
| ||
| ||___ trunk 7
| |____ trunk 6
| . . .
|_________ trunk 1
where x : 1 - The represented trunk belongs to the port team
0 - The represented trunk does not belong to the port team"
::= { portTeamNewCfgTableEntry 6 }
portTeamNewCfgAddTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trunk to be added in the port team. When read, 0 is returned."
::= { portTeamNewCfgTableEntry 7 }
portTeamNewCfgRemoveTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trunk to be deleted from the port team. When read, 0is returned."
::= { portTeamNewCfgTableEntry 8 }
portTeamNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { portTeamNewCfgTableEntry 9 }
portTeamNewCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the Port Team."
::= { portTeamNewCfgTableEntry 10 }
hwBypassGeneralCfg OBJECT IDENTIFIER ::= { hwBypassConfig 1 }
hwBypassCurState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware bypass current state."
::= { hwBypassGeneralCfg 1 }
hwBypassNewState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hardware bypass new state."
::= { hwBypassGeneralCfg 2 }
portTeamInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortTeamInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port team information table."
::= { portTeamInfo 1 }
portTeamInfoTableEntry OBJECT-TYPE
SYNTAX PortTeamInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port team information table."
INDEX { portTeamInfoIndex }
::= { portTeamInfoTable 1 }
PortTeamInfoTableEntry ::= SEQUENCE {
portTeamInfoIndex Integer32,
portTeamInfoState INTEGER,
portTeamInfoPorts OCTET STRING,
portTeamInfoPortsState OCTET STRING,
portTeamInfoTrunks OCTET STRING,
portTeamInfoTrunksState OCTET STRING,
portTeamInfoMaster DisplayString
}
portTeamInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the port team."
::= { portTeamInfoTableEntry 1 }
portTeamInfoState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
passive(2),
active(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of a port team."
::= { portTeamInfoTableEntry 2 }
portTeamInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the port team. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8
| ||
| ||___ port 7
| |____ port 6
| . . .
|_________ port 1
where x : 1 - The represented port is added to the port team
0 - The represented port is not added to the port team"
::= { portTeamInfoTableEntry 3 }
portTeamInfoPortsState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port state list in the port team. The ports states are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ port 8 state
| ||
| ||___ port 7 state
| |____ port 6 state
| . . .
|_________ port 1 state
where x : 1 - The represented port in that team is up
0 - If the represented port is added in that team then
the port state is down otherwise the port is not
added into that team( check whether port is added
to the team or not through the mib portTeamInfoPorts)."
::= { portTeamInfoTableEntry 4 }
portTeamInfoTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk list in the port team. The trunks are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8
| ||
| ||___ trunk 7
| |____ trunk 6
| . . .
|_________ trunk 1
where x : 1 - The represented trunk belongs to the port team
0 - The represented trunk does not belong to the port team"
::= { portTeamInfoTableEntry 5 }
portTeamInfoTrunksState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk state list in the trunk team. The trunks states are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| |||_ trunk 8 state
| ||
| ||___ trunk 7 state
| |____ trunk 6 state
| . . .
|_________ trunk 1 state
where x : 1 - The represented trunk in that team is up
0 - If the represented trunk is added in that team then
the trunk state is down otherwise the port is
not added into that team( check whether it is added
to the team or not through the mib portTeamInfoTrunks)."
::= { portTeamInfoTableEntry 6 }
portTeamInfoMaster OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master port/trunk of the port team when team state is ACTIVE."
::= { portTeamInfoTableEntry 7 }
vadcVlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VadcVlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vADC table of VLAN configuration."
::= { vadcVlan 1 }
vadcVlanCurCfgTableEntry OBJECT-TYPE
SYNTAX VadcVlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vadcVlanCurCfgVlanId }
::= { vadcVlanCurCfgTable 1 }
VadcVlanCurCfgTableEntry ::= SEQUENCE {
vadcVlanCurCfgVlanId Integer32,
vadcVlanCurCfgBwmCont Integer32,
vadcVlanCurCfgNonIp Integer32,
vadcVlanCurCfgIpv6LlaGen INTEGER,
vadcVlanCurCfgRouterAdv INTEGER,
vadcVlanCurCfgReTransInt Unsigned32,
vadcVlanCurCfgMinIntBwAdv INTEGER,
vadcVlanCurCfgMaxIntBwAdv INTEGER,
vadcVlanCurCfgMtu INTEGER,
vadcVlanCurCfgCurHopLimit INTEGER,
vadcVlanCurCfgMFlag INTEGER,
vadcVlanCurCfgOFlag INTEGER,
vadcVlanCurCfgRTime INTEGER,
vadcVlanCurCfgRlTime INTEGER,
vadcVlanCurCfgPlTime Unsigned32,
vadcVlanCurCfgVlTime Unsigned32,
vadcVlanCurCfgOpInfo INTEGER,
vadcVlanCurCfgApInfo INTEGER,
vadcVlanCurCfgIpv6Lla DisplayString
}
vadcVlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vadcVlanCurCfgTableEntry 1 }
vadcVlanCurCfgBwmCont OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default contract number for the VLAN"
::= { vadcVlanCurCfgTableEntry 2 }
vadcVlanCurCfgNonIp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BWM contract for non-ip traffic"
::= { vadcVlanCurCfgTableEntry 3 }
vadcVlanCurCfgIpv6LlaGen OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable IPv6 Link Local Address Generation."
::= { vadcVlanCurCfgTableEntry 4 }
vadcVlanCurCfgRouterAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable router advertisement."
::= { vadcVlanCurCfgTableEntry 5 }
vadcVlanCurCfgReTransInt OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmission interval."
::= { vadcVlanCurCfgTableEntry 6 }
vadcVlanCurCfgMinIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 3 .. 1800 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum interval between router advertisements."
::= { vadcVlanCurCfgTableEntry 7 }
vadcVlanCurCfgMaxIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 4 .. 1800 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum interval between router advertisements."
::= { vadcVlanCurCfgTableEntry 8 }
vadcVlanCurCfgMtu OBJECT-TYPE
SYNTAX INTEGER ( 1200 .. 1500 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Transmission Unit. Enter 0 for None."
::= { vadcVlanCurCfgTableEntry 9 }
vadcVlanCurCfgCurHopLimit OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 255 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current hop limit field."
::= { vadcVlanCurCfgTableEntry 10 }
vadcVlanCurCfgMFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable Managed address configuration flag."
::= { vadcVlanCurCfgTableEntry 11 }
vadcVlanCurCfgOFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable Other address configuration flag."
::= { vadcVlanCurCfgTableEntry 12 }
vadcVlanCurCfgRTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 3600000 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reachable time."
::= { vadcVlanCurCfgTableEntry 13 }
vadcVlanCurCfgRlTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 9000 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Life Time.Enter 0 for None"
::= { vadcVlanCurCfgTableEntry 14 }
vadcVlanCurCfgPlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Preferred life time."
::= { vadcVlanCurCfgTableEntry 15 }
vadcVlanCurCfgVlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid life time."
::= { vadcVlanCurCfgTableEntry 16 }
vadcVlanCurCfgOpInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable On-link flag in prefix."
::= { vadcVlanCurCfgTableEntry 17 }
vadcVlanCurCfgApInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable Autonomous address configuration flag in prefix."
::= { vadcVlanCurCfgTableEntry 18 }
vadcVlanCurCfgIpv6Lla OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPV6 Link Local Address."
::= { vadcVlanCurCfgTableEntry 19 }
vadcVlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VadcVlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vADC table of VLAN configuration."
::= { vadcVlan 2 }
vadcVlanNewCfgTableEntry OBJECT-TYPE
SYNTAX VadcVlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vadcVlanNewCfgVlanId }
::= { vadcVlanNewCfgTable 1 }
VadcVlanNewCfgTableEntry ::= SEQUENCE {
vadcVlanNewCfgVlanId Integer32,
vadcVlanNewCfgBwmCont Integer32,
vadcVlanNewCfgNonIp Integer32,
vadcVlanNewCfgIpv6LlaGen INTEGER,
vadcVlanNewCfgRouterAdv INTEGER,
vadcVlanNewCfgReTransInt Unsigned32,
vadcVlanNewCfgMinIntBwAdv INTEGER,
vadcVlanNewCfgMaxIntBwAdv INTEGER,
vadcVlanNewCfgMtu INTEGER,
vadcVlanNewCfgCurHopLimit INTEGER,
vadcVlanNewCfgMFlag INTEGER,
vadcVlanNewCfgOFlag INTEGER,
vadcVlanNewCfgRTime INTEGER,
vadcVlanNewCfgRlTime INTEGER,
vadcVlanNewCfgPlTime Unsigned32,
vadcVlanNewCfgVlTime Unsigned32,
vadcVlanNewCfgOpInfo INTEGER,
vadcVlanNewCfgApInfo INTEGER,
vadcVlanNewCfgIpv6Lla DisplayString
}
vadcVlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vadcVlanNewCfgTableEntry 1 }
vadcVlanNewCfgBwmCont OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default contract number for the VLAN"
::= { vadcVlanNewCfgTableEntry 2 }
vadcVlanNewCfgNonIp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BWM contract for non-ip traffic"
::= { vadcVlanNewCfgTableEntry 3 }
vadcVlanNewCfgIpv6LlaGen OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable IPv6 Link Local Address Generation."
::= { vadcVlanNewCfgTableEntry 4 }
vadcVlanNewCfgRouterAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable router advertisement."
::= { vadcVlanNewCfgTableEntry 5 }
vadcVlanNewCfgReTransInt OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmission interval."
::= { vadcVlanNewCfgTableEntry 6 }
vadcVlanNewCfgMinIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 3 .. 1800 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum interval between router advertisements."
::= { vadcVlanNewCfgTableEntry 7 }
vadcVlanNewCfgMaxIntBwAdv OBJECT-TYPE
SYNTAX INTEGER ( 4 .. 1800 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum interval between router advertisements."
::= { vadcVlanNewCfgTableEntry 8 }
vadcVlanNewCfgMtu OBJECT-TYPE
SYNTAX INTEGER ( 1200 .. 1500 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Transmission Unit. Enter 0 for None."
::= { vadcVlanNewCfgTableEntry 9 }
vadcVlanNewCfgCurHopLimit OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 255 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current hop limit field."
::= { vadcVlanNewCfgTableEntry 10 }
vadcVlanNewCfgMFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable Managed address configuration flag."
::= { vadcVlanNewCfgTableEntry 11 }
vadcVlanNewCfgOFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable Other address configuration flag."
::= { vadcVlanNewCfgTableEntry 12 }
vadcVlanNewCfgRTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 3600000 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reachable time."
::= { vadcVlanNewCfgTableEntry 13 }
vadcVlanNewCfgRlTime OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 9000 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Life Time.Enter 0 for None"
::= { vadcVlanNewCfgTableEntry 14 }
vadcVlanNewCfgPlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Preferred life time."
::= { vadcVlanNewCfgTableEntry 15 }
vadcVlanNewCfgVlTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Valid life time."
::= { vadcVlanNewCfgTableEntry 16 }
vadcVlanNewCfgOpInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable On-link flag in prefix."
::= { vadcVlanNewCfgTableEntry 17 }
vadcVlanNewCfgApInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable / Disable Autonomous address configuration flag in prefix."
::= { vadcVlanNewCfgTableEntry 18 }
vadcVlanNewCfgIpv6Lla OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPV6 Link Local Address."
::= { vadcVlanNewCfgTableEntry 19 }
-- Link Layer Discovery Protocol (LLDP)
lldpCurTxState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LLDP transmisson."
::= { lldp 1 }
lldpNewTxState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable LLDP transmisson."
::= { lldp 2 }
lldpCurTxInterval OBJECT-TYPE
SYNTAX INTEGER (2..600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval at which LLDP frames are transmitted on
behalf of this LLDP agent.
The default value for lldpCurTxInterval object is
30 seconds."
::= { lldp 3 }
lldpNewTxInterval OBJECT-TYPE
SYNTAX INTEGER (2..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval at which LLDP frames are transmitted on
behalf of this LLDP agent.
The default value for lldpCurTxInterval object is
30 seconds."
::= { lldp 4 }
lldpCurTxHold OBJECT-TYPE
SYNTAX INTEGER (2..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX hold multiplier.
The time-to-live value expressed as a multiple of the
lldpCurTxInterval object."
::= { lldp 5 }
lldpNewTxHold OBJECT-TYPE
SYNTAX INTEGER (2..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TX hold multiplier.
The time-to-live value expressed as a multiple of the
lldpCurTxInterval object."
::= { lldp 6 }
lldpCurVendtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable publishing vendor specific TLVs ."
::= { lldp 7 }
lldpNewVendtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable publishing vendor specific TLVs ."
::= { lldp 8 }
-- FDB Statistics
fdbStatsCreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries created in the Forwarding Database."
::= { fdbStats 1 }
fdbStatsDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries deleted from the Forwarding Database."
::= { fdbStats 2 }
fdbStatsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the Forwarding Database."
::= { fdbStats 3 }
fdbStatsHiwat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Highest number of entries recorded at any given time in the
Forwarding Database."
::= { fdbStats 4 }
fdbStatsLookups OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entry lookups in the Forwarding Database."
::= { fdbStats 5 }
fdbStatsLookupFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unsuccessful searches made in the Forwarding Database."
::= { fdbStats 6 }
fdbStatsFinds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of searches in the Forwarding Database."
::= { fdbStats 7 }
fdbStatsFindFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of search failures in the Forwarding Database."
::= { fdbStats 8 }
fdbStatsFindOrCreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries found or created in the Forwarding Database."
::= { fdbStats 9 }
fdbStatsOverflows OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries overflowing the Forwarding Database."
::= { fdbStats 10 }
-- STP Statistics
stgStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port statistics."
::= { stpStats 1 }
stgStatsPortTableEntry OBJECT-TYPE
SYNTAX StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about port of a particular Spanning Tree Group."
INDEX { stgStatsStpIndex, stgStatsPortIndex }
::= { stgStatsPortTable 1 }
StgStatsPortTableEntry ::= SEQUENCE {
stgStatsStpIndex Integer32,
stgStatsPortIndex Integer32,
stgStatsPortRcvCfgBpdus Integer32,
stgStatsPortRcvTcnBpdus Integer32,
stgStatsPortXmtCfgBpdus Integer32,
stgStatsPortXmtTcnBpdus Integer32,
stgStatsPortRcvMrstBpdus Integer32,
stgStatsPortXmtMrstBpdus Integer32
}
stgStatsStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 1 }
stgStatsPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 2 }
stgStatsPortRcvCfgBpdus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's received on this port."
::= { stgStatsPortTableEntry 3 }
stgStatsPortRcvTcnBpdus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's received on this port."
::= { stgStatsPortTableEntry 4 }
stgStatsPortXmtCfgBpdus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 5 }
stgStatsPortXmtTcnBpdus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 6 }
stgStatsPortRcvMrstBpdus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST/RST BPDU's received on this port."
::= { stgStatsPortTableEntry 7 }
stgStatsPortXmtMrstBpdus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MST/RST BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 8 }
fdbClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the entire master FDB."
::= { fdbInfo 1 }
-- FDB table
fdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { fdbInfo 2 }
fdbEntry OBJECT-TYPE
SYNTAX FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { fdbMacAddr }
::= { fdbTable 1 }
FdbEntry ::= SEQUENCE {
fdbMacAddr PhysAddress,
fdbVlan Integer32,
fdbSrcPort Integer32,
fdbSrcTrunk Integer32,
fdbState INTEGER,
fdbRefSps DisplayString,
fdbLearnedPort Integer32,
fdbAge DisplayString,
fdbRefPorts DisplayString
}
fdbMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { fdbEntry 1 }
fdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { fdbEntry 2 }
fdbSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { fdbEntry 3 }
fdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ignore(2),
forward(3),
flood(4),
ffd(5),
trunk(6),
vir(7),
vsr(8),
vpr(9),
other(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(3) : the MAC address has been learned by the switch
flood(4) : the MAC address is a multicast destination address
trunk(6) : frames with this MAC address are forwarded to trunk
group
vir(7) : frames with this MAC address are forwarded for L3
processing"
::= { fdbEntry 4 }
fdbAge OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of this FDB entry."
::= { fdbEntry 8 }
fdbRefPorts OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The referenced ports associated with this FDB entry."
::= { fdbEntry 9 }
fdbRefSps OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The referenced SPs associated with this FDB entry."
::= { fdbEntry 5 }
fdbLearnedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The learned port associated with this FDB entry."
::= { fdbEntry 6 }
fdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { fdbEntry 7 }
-- STP information
stpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group information."
::= { stpInfo 1 }
stpInfoTableEntry OBJECT-TYPE
SYNTAX StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group."
INDEX { stpInfoIndex }
::= { stpInfoTable 1 }
StpInfoTableEntry ::= SEQUENCE {
stpInfoIndex Integer32,
stpInfoTimeSinceTopChange TimeTicks,
stpInfoTopChanges Counter32,
stpInfoDesignatedRoot BridgeId,
stpInfoRootCost Integer32,
stpInfoRootPort Integer32,
stpInfoMaxAge Integer32,
stpInfoHelloTime Integer32,
stpInfoForwardDelay Integer32,
stpInfoHoldTime Integer32,
stpInfoTimeSinceTopChangeStr DisplayString
}
stpInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stpInfoTableEntry 1 }
stpInfoTimeSinceTopChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity."
::= { stpInfoTableEntry 2 }
stpInfoTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by this bridge since
the management entity was last reset or initialized."
::= { stpInfoTableEntry 3 }
stpInfoDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node."
::= { stpInfoTableEntry 4 }
stpInfoRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from this bridge."
::= { stpInfoTableEntry 5 }
stpInfoRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the lowest cost path from
this bridge to the root bridge."
::= { stpInfoTableEntry 6 }
stpInfoMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using."
::= { stpInfoTableEntry 7 }
stpInfoHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using."
::= { stpInfoTableEntry 8 }
stpInfoForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database."
::= { stpInfoTableEntry 9 }
stpInfoHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second."
::= { stpInfoTableEntry 10 }
stpInfoTimeSinceTopChangeStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in format: Days, Hours, Minutes, Seconds. since the last time a topology
change was detected by the bridge entity."
::= { stpInfoTableEntry 11 }
stpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port information."
::= { stpInfo 2 }
stpInfoPortTableEntry OBJECT-TYPE
SYNTAX StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration for a particular Spanning Tree
Group."
INDEX { stpInfoPortStpIndex, stpInfoPortIndex }
::= { stpInfoPortTable 1 }
StpInfoPortTableEntry ::= SEQUENCE {
stpInfoPortStpIndex Integer32,
stpInfoPortIndex Integer32,
stpInfoPortState INTEGER,
stpInfoPortDesignatedRoot BridgeId,
stpInfoPortDesignatedCost Integer32,
stpInfoPortDesignatedBridge BridgeId,
stpInfoPortDesignatedPort OCTET STRING,
stpInfoPortForwardTransitions Counter32,
stpInfoPortRole INTEGER,
stpInfoPortLinkType INTEGER,
stpInfoPortEdge INTEGER,
stpInfoPortPathCost Integer32
}
stpInfoPortStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 1 }
stpInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 2 }
stpInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6),
discarding(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1)."
::= { stpInfoPortTableEntry 3 }
stpInfoPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached."
::= { stpInfoPortTableEntry 4 }
stpInfoPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs."
::= { stpInfoPortTableEntry 5 }
stpInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment."
::= { stpInfoPortTableEntry 6 }
stpInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated Bridge for this
port's segment."
::= { stpInfoPortTableEntry 7 }
stpInfoPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned from the Learning
state to the Forwarding state."
::= { stpInfoPortTableEntry 8 }
stpInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the port."
::= { stpInfoPortTableEntry 9 }
stpInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port role. Returns unknown(7) when MSTP/RSTP is not enabled,
otherwise returns appropriate port role."
::= { stpInfoPortTableEntry 10 }
stpInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this port is being treated as
having a shared media connection."
::= { stpInfoPortTableEntry 11 }
stpInfoPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port."
::= { stpInfoPortTableEntry 12 }
-- LACP information
lacpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port information."
::= { lacpInfo 1 }
lacpInfoPortTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a LACP port."
INDEX { lacpInfoPortIndex }
::= { lacpInfoPortTable 1 }
LacpInfoPortTableEntry ::= SEQUENCE {
lacpInfoPortIndex Integer32,
lacpInfoPortSelected INTEGER,
lacpInfoPortNtt INTEGER,
lacpInfoPortReadyN INTEGER,
lacpInfoPortMoved INTEGER
}
lacpInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortTableEntry 1 }
lacpInfoPortSelected OBJECT-TYPE
SYNTAX INTEGER {
selected(1),
unselected(2),
standby(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently precent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition."
::= { lacpInfoPortTableEntry 2 }
lacpInfoPortNtt OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link."
::= { lacpInfoPortTableEntry 3 }
lacpInfoPortReadyN OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port."
::= { lacpInfoPortTableEntry 4 }
lacpInfoPortMoved OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port."
::= { lacpInfoPortTableEntry 5 }
-- CIST Information
cistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 1 }
cistRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the CIST Root as seen from this bridge."
::= { cistGeneralInfo 2 }
cistRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge."
::= { cistGeneralInfo 3 }
cistBridgeHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs in seconds."
::= { cistGeneralInfo 4 }
cistBridgeMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { cistGeneralInfo 5 }
cistBridgeForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { cistGeneralInfo 6 }
cistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 7 }
cistRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root as seen from this
bridge."
::= { cistGeneralInfo 8 }
-- CIST Port Information Table
cistInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port information."
::= { cistInfo 2 }
cistInfoPortTableEntry OBJECT-TYPE
SYNTAX CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port."
INDEX { cistInfoPortIndex }
::= { cistInfoPortTable 1 }
CistInfoPortTableEntry ::= SEQUENCE {
cistInfoPortIndex Integer32,
cistInfoPortPriority Integer32,
cistInfoPortPathCost Integer32,
cistInfoPortState INTEGER,
cistInfoPortRole INTEGER,
cistInfoPortDesignatedBridge BridgeId,
cistInfoPortDesignatedPort OCTET STRING,
cistInfoPortLinkType INTEGER
}
cistInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { cistInfoPortTableEntry 1 }
cistInfoPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { cistInfoPortTableEntry 2 }
cistInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { cistInfoPortTableEntry 3 }
cistInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { cistInfoPortTableEntry 4 }
cistInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning tree instance."
::= { cistInfoPortTableEntry 5 }
cistInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { cistInfoPortTableEntry 6 }
cistInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { cistInfoPortTableEntry 7 }
cistInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port is being treated as
having a shared media connection."
::= { cistInfoPortTableEntry 8 }
-- VLAN information
vlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN information."
::= { vlanInfo 1 }
vlanInfoTableEntry OBJECT-TYPE
SYNTAX VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular VLAN."
INDEX { vlanInfoId }
::= { vlanInfoTable 1 }
VlanInfoTableEntry ::= SEQUENCE {
vlanInfoId INTEGER,
vlanInfoName DisplayString,
vlanInfoStatus INTEGER,
vlanInfoJumbo INTEGER,
vlanInfoBwmContract Integer32,
vlanInfoLearn INTEGER,
vlanInfoPorts OCTET STRING
}
vlanInfoId OBJECT-TYPE
SYNTAX INTEGER (1..4090)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanInfoTableEntry 1 }
vlanInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanInfoTableEntry 2 }
vlanInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable, VLAN state information"
::= { vlanInfoTableEntry 3 }
vlanInfoJumbo OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Jumbo frames, Jumbo frames state
information of a VLAN"
::= { vlanInfoTableEntry 4 }
vlanInfoBwmContract OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default BWM contract number information of a VLAN "
::= { vlanInfoTableEntry 5 }
vlanInfoLearn OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable source MAC address learning, MAC address
learning information of a VLAN"
::= { vlanInfoTableEntry 6 }
vlanInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanInfoTableEntry 7 }
vlanInfoTableVADC OBJECT-TYPE
SYNTAX SEQUENCE OF VlanInfoTableVADCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN information for vADC."
::= { vlanInfo 2 }
vlanInfoTableVADCEntry OBJECT-TYPE
SYNTAX VlanInfoTableVADCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular VLAN for vADC."
INDEX { vlanInfoIdx }
::= { vlanInfoTableVADC 1 }
VlanInfoTableVADCEntry ::= SEQUENCE {
vlanInfoIdx INTEGER,
vlanInfoVADC DisplayString
}
vlanInfoIdx OBJECT-TYPE
SYNTAX INTEGER (1..4090)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanInfoTableVADCEntry 1 }
vlanInfoVADC OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display the VADC number which is connected to this VLAN."
::= { vlanInfoTableVADCEntry 2 }
--- MTU and Jumbo Frames Configuration
mtuGeneralCfg OBJECT IDENTIFIER ::= { mtuCfg 1 }
mtuCurValue OBJECT-TYPE
SYNTAX INTEGER (1500..9216)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current config value of MTU"
::= { mtuGeneralCfg 1 }
mtuNewValue OBJECT-TYPE
SYNTAX INTEGER (1500..9216)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new config value of MTU"
::= { mtuGeneralCfg 2 }
jumboSupported OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of whether the platform supports Jumbo Frames"
::= { mtuGeneralCfg 3 }
END
View Git Blame Copy Permalink