2520 lines
75 KiB
Plaintext
2520 lines
75 KiB
Plaintext
RAD-LanRger-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- It is RAD's intent to encourage the widespread use of
|
|
-- this Specification in connection with the management of
|
|
-- RAD products. RAD grants vendors, end-users,
|
|
-- and other interested parties a non-exclusive license to
|
|
-- use this Specification in connection with the management
|
|
-- of RAD products.
|
|
|
|
-- This Specification is supplied "as is," and RAD makes
|
|
-- no warranty, either express or implied, as to the use,
|
|
-- operation, condition, or performance of the Specification.
|
|
|
|
|
|
IMPORTS
|
|
|
|
ifAlias, ifIndex, InterfaceIndexOrZero FROM IF-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
Integer32, Counter32, IpAddress,
|
|
Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE, OBJECT-IDENTITY FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, RowPointer,
|
|
MacAddress, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC
|
|
radBridges FROM RAD-SMI-MIB
|
|
InetAddressIPv4, InetAddressIPv6 FROM INET-ADDRESS-MIB
|
|
pppLinkStatusEntry, pppLinkConfigEntry FROM PPP-LCP-MIB
|
|
agnLed, alarmEventLogSourceName, alarmEventLogAlarmOrEventId,
|
|
alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime,
|
|
alarmEventReason FROM RAD-GEN-MIB;
|
|
|
|
|
|
lanranger MODULE-IDENTITY
|
|
LAST-UPDATED "201606081802Z" -- June 08, 2016
|
|
ORGANIZATION "RAD Data Communications Ltd."
|
|
CONTACT-INFO
|
|
"System Department
|
|
|
|
Email: mibs@rad.com
|
|
Postal: RAD Data Communications Ltd.
|
|
24 Raoul Wallenberg St.
|
|
Tel-Aviv 6971920
|
|
Israel
|
|
|
|
Phone: +972-3-645-5421
|
|
Fax: +972-3-760-7844"
|
|
DESCRIPTION
|
|
"Lanragner MIB."
|
|
::= { radBridges 2 }
|
|
|
|
|
|
-- the lanrangerConfig group defines configurable parameters that are specific to the LANRANger
|
|
-- product line
|
|
|
|
lanrangerConfig OBJECT IDENTIFIER ::= { lanranger 1 }
|
|
|
|
lanrangerLoc OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
main(1),
|
|
remote(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"lanrangerLoc is set to main if the LANRANger is located on the main LAN and it is set to
|
|
remote if it is located on a LAN at a remote site."
|
|
::= { lanrangerConfig 1 }
|
|
|
|
lanrangerBurnAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the burned-in MacAddress on the LANRANger."
|
|
::= { lanrangerConfig 2 }
|
|
|
|
lanrangerLocAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a locally administered address. If a zero value appears, the network administrator
|
|
did not set a locally administered address."
|
|
::= { lanrangerConfig 3 }
|
|
|
|
lanrangerActiveAddress OBJECT-TYPE
|
|
SYNTAX INTEGER {burnedIn(1), locallyAdministered(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address that is in use on the LANRANger.
|
|
The address selected will appear in ifPhysAddress."
|
|
::= { lanrangerConfig 4 }
|
|
|
|
|
|
lanrangerLearningStationTopology OBJECT-TYPE
|
|
SYNTAX INTEGER { dynamic (1),
|
|
permanent (2),
|
|
permanentAndDynamic (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Learning station topology defines for the
|
|
LANRANger which type of station will be inserted
|
|
in the station list.
|
|
The default value is permanentAndDynamic(3).
|
|
|
|
dynamic(1) - Learning lan station only.
|
|
permanent(2) -
|
|
permanentAndDynamic(3)-
|
|
|
|
Setting this parameter will reset the LANRANger .
|
|
----- "
|
|
::= { lanrangerConfig 5 }
|
|
|
|
|
|
lanrangerIpRouterInfo OBJECT IDENTIFIER
|
|
::= { lanrangerConfig 6 }
|
|
|
|
lanrangerIpDefaultLink OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default selected link, having the numbering system of ifIndex.
|
|
The valid values range is: 1..ifIndex.
|
|
The value must remain constant at least from one
|
|
re-initialization of the network management agent to
|
|
the next.
|
|
notSupported = 255 "
|
|
::= { lanrangerIpRouterInfo 1 }
|
|
|
|
lanrangerIpFastReTxLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The maximum buffer depth (queue length) for which lanranger
|
|
will accept retransmission (for each station; the level
|
|
is the same for all the stations).
|
|
The valid values range is: 1..255 . "
|
|
::= { lanrangerIpRouterInfo 2 }
|
|
|
|
lanrangerIpAgingTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Ip aging time for a station - in min. "
|
|
::= { lanrangerIpRouterInfo 3 }
|
|
|
|
--BOOT-P parameters; are relevant only for routers
|
|
|
|
lanrangerIpBootP OBJECT IDENTIFIER
|
|
::= { lanrangerIpRouterInfo 4 }
|
|
|
|
lanrangerBootPAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (2),
|
|
enable (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Activating (disable/enable) the BootP operation."
|
|
::= { lanrangerIpBootP 1 }
|
|
|
|
lanrangerBootPAvailableEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of available entries in the BootP table."
|
|
::= { lanrangerIpBootP 2 }
|
|
|
|
lanrangerBootPCurrentEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of BootP entries in the BootP table."
|
|
::= { lanrangerIpBootP 3 }
|
|
|
|
lanrangerBootPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerBootPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of BootP entries. The number of entries is up to
|
|
BootP current entries, according to the LANRANger model."
|
|
::= { lanrangerIpBootP 4 }
|
|
|
|
lanrangerBootPEntry OBJECT-TYPE
|
|
SYNTAX LanrangerBootPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BootP parameters per entry of the BootP table."
|
|
INDEX { lanrangerBootPIpAddress }
|
|
::= { lanrangerBootPTable 1 }
|
|
|
|
LanrangerBootPEntry ::=
|
|
SEQUENCE {
|
|
lanrangerBootPIpAddress
|
|
IpAddress,
|
|
lanrangerBootPIfIndex
|
|
INTEGER,
|
|
lanrangerBootPOperation
|
|
INTEGER
|
|
}
|
|
|
|
lanrangerBootPIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BootP Ip Address."
|
|
::= { lanrangerBootPEntry 1 }
|
|
|
|
lanrangerBootPIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {notAllocated (255)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number is the same as the ifIndex of the link."
|
|
::= { lanrangerBootPEntry 2 }
|
|
|
|
lanrangerBootPOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
delete (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
active(1) - this entry is currently in use
|
|
and will remain so even after the next
|
|
reset of the LANRANger.
|
|
delete(2) - writing this value to the object,
|
|
removes the corresponding entry from the
|
|
table. "
|
|
::= { lanrangerBootPEntry 3 }
|
|
|
|
|
|
lanrangerSpoofingInfo OBJECT IDENTIFIER
|
|
::= { lanrangerConfig 7 }
|
|
|
|
lanrangerSpoofingAction OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spoofing action is applied by bit code:
|
|
enable : bit 0 set (disable: bit 0 is 0)
|
|
keepAlive : bit 1
|
|
... : bit 2
|
|
and so on.
|
|
For the above example, to set spoofing to keepAlive action,
|
|
the object's value will be 3 = [ 2**0 + 2**1 ]
|
|
Only the Remote LANRANger will accept this object !
|
|
------- "
|
|
::= { lanrangerSpoofingInfo 1 }
|
|
|
|
lanrangerSpoofingAgingStation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Aging time of stations list, in min. The agent 'translates'
|
|
the time entered in minutes, to 10 min. resolution, as
|
|
follows:
|
|
1..10 min - 10 min
|
|
11..20 min - 20 min
|
|
and so on...
|
|
0 is not a valid value.
|
|
Only the Remote LANRANger will accept this object !
|
|
---------------- "
|
|
::= { lanrangerSpoofingInfo 2 }
|
|
|
|
|
|
|
|
-- The variables in the lanrangerInterface group define LANRANger-specific and other
|
|
-- link parameters and information
|
|
|
|
lanrangerInterface OBJECT IDENTIFIER ::= { lanranger 2 }
|
|
|
|
lanrangerLinkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of link entries. The number of entries is
|
|
up to 8, according to the LANRANger model."
|
|
::= { lanrangerInterface 1 }
|
|
|
|
lanrangerLinkEntry OBJECT-TYPE
|
|
SYNTAX LanrangerLinkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LANRANger-specific parameter values for a link."
|
|
INDEX {lanrangerLinkIndex }
|
|
::= { lanrangerLinkTable 1 }
|
|
|
|
LanrangerLinkEntry ::=
|
|
SEQUENCE {
|
|
lanrangerLinkIndex
|
|
Integer32,
|
|
lanrangerLinkType
|
|
INTEGER ,
|
|
lanrangerLinkState
|
|
INTEGER,
|
|
lanrangerLinkDTRMode
|
|
INTEGER,
|
|
lanrangerLinkStatus
|
|
INTEGER,
|
|
lanrangerLinkConnectionStatus
|
|
INTEGER,
|
|
lanrangerLinkNumOfLogLinks
|
|
Integer32,
|
|
lanrangerLinkReset
|
|
INTEGER,
|
|
lanrangerLinkRxMaskedFrames
|
|
Counter32,
|
|
lanrangerLinkLayer2Type
|
|
INTEGER,
|
|
lanrangerLinkLayer3Type
|
|
INTEGER,
|
|
lanrangerBackupLink
|
|
Integer32,
|
|
wrWanThrottle
|
|
Integer32,
|
|
wrIpTransparentMode
|
|
INTEGER,
|
|
wrIpTransparentGateway
|
|
IpAddress,
|
|
lanrangerLinkProtocolType
|
|
INTEGER
|
|
}
|
|
|
|
lanrangerLinkIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each link, equal to the value of ifIndex.
|
|
The value for each link must remain constant at least
|
|
from one re-initialization of the network management agent to
|
|
the next."
|
|
::= { lanrangerLinkEntry 1 }
|
|
|
|
lanrangerLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
synchronous (1),
|
|
asynchronous (2),
|
|
x25FRconfig (3),
|
|
x25FRchannel (4),
|
|
isdn (5),
|
|
frameRelay (6),
|
|
pcmcia (7),
|
|
dm2wire (8),
|
|
notExist (254),
|
|
unknown (255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link type ."
|
|
::= { lanrangerLinkEntry 2 }
|
|
|
|
lanrangerLinkState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(2),
|
|
enable (3),
|
|
backup (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link is disabled, enabled or backup."
|
|
::= { lanrangerLinkEntry 3 }
|
|
|
|
lanrangerLinkDTRMode OBJECT-TYPE
|
|
SYNTAX INTEGER { off(2), on(3), unknown(255) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link DTR mode."
|
|
::= { lanrangerLinkEntry 4 }
|
|
|
|
lanrangerLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok (1),
|
|
fail (2),
|
|
rxNoClock (3),
|
|
txProblem (4),
|
|
noCarrierD (5),
|
|
unknown (255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link physical status ."
|
|
::= { lanrangerLinkEntry 5 }
|
|
|
|
lanrangerLinkConnectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fail (1),
|
|
disconnect(2),
|
|
connect (3),
|
|
wait (4),
|
|
down (5),
|
|
trying (6),
|
|
testing (7),
|
|
unknown (255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link connection status."
|
|
::= { lanrangerLinkEntry 6 }
|
|
|
|
lanrangerLinkNumOfLogLinks OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of logical links on this physical link.
|
|
0 = noLogicalLink "
|
|
::= { lanrangerLinkEntry 7 }
|
|
|
|
lanrangerLinkReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(2),
|
|
on (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this attribute to ON will reset the link . Upon completion the value will be set to OFF"
|
|
::= { lanrangerLinkEntry 8 }
|
|
|
|
lanrangerLinkRxMaskedFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of masked frames received on this physical link."
|
|
::= { lanrangerLinkEntry 9 }
|
|
|
|
lanrangerLinkLayer2Type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
bridge (2),
|
|
ipRouter (3),
|
|
ipxRouter (4),
|
|
ipAndIpxRouter (5),
|
|
bRouter (6),
|
|
ipBrouter (7),
|
|
ipxBrouter (8),
|
|
ipAndIpxBrouter (9),
|
|
bridgeAndStp (10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link layer 2 type indicates whether the link is Bridge
|
|
or Router and specifies the Router's type."
|
|
::= { lanrangerLinkEntry 10 }
|
|
|
|
lanrangerLinkLayer3Type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
proprietary (2),
|
|
terminalServer (3),
|
|
slip (30),
|
|
cSlip (31),
|
|
ppp (40),
|
|
rfc1490 (41),
|
|
hdlcFraming (42),
|
|
mlPpp (43)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link layer 3 type indicates the protocol type."
|
|
::= { lanrangerLinkEntry 11 }
|
|
|
|
lanrangerBackupLink OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The backup link interface index located in the two LSB bytes.
|
|
If the link is FR type, the two MSB will contain a DLCi number.
|
|
For other link types the two MSB will equal to 0."
|
|
::= { lanrangerLinkEntry 12 }
|
|
|
|
wrWanThrottle OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Throttle controls the baud rate of the WAN.
|
|
For example if we have a WAN rate of 2M but we want only 1/2 M as
|
|
the baud rate we set the Wan Throttle to 512k.
|
|
|
|
These are the values:
|
|
Full (2),
|
|
1M (3),
|
|
512k (4),
|
|
128k (5),
|
|
64k (6)
|
|
|
|
Full throttle option (2) means the LAN rate."
|
|
::= { lanrangerLinkEntry 13 }
|
|
|
|
wrIpTransparentMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
disable (2),
|
|
enableAll (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter shows whether the IP Transparent mode is enabled.
|
|
When this mode is enabled, all frames (including broadcast and multicast frames)
|
|
are forwarded from E1/T1 to LAN and from LAN to E1/T1."
|
|
::= { lanrangerLinkEntry 14 }
|
|
|
|
wrIpTransparentGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway used for transparent IP."
|
|
::= { lanrangerLinkEntry 15 }
|
|
|
|
lanrangerLinkProtocolType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
noRoutingProtocol (2),
|
|
rip1 (3),
|
|
rip2 (4),
|
|
rip1OrRip2 (5),
|
|
ospf (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter indicates the routing protocol running on this Interface."
|
|
::= { lanrangerLinkEntry 16}
|
|
|
|
|
|
--Link Connections
|
|
|
|
lanrangerLinkConnection OBJECT IDENTIFIER
|
|
::= { lanrangerInterface 2 }
|
|
|
|
lanrangerConnMaxEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in the Connection table."
|
|
::= { lanrangerLinkConnection 1 }
|
|
|
|
lanrangerConnCurrentEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the Connection table."
|
|
::= { lanrangerLinkConnection 2 }
|
|
|
|
lanrangerLinkConnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerLinkConnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Connection entries. The number of entries is
|
|
up to Max entries, according to the LANRANger model."
|
|
::= { lanrangerLinkConnection 3 }
|
|
|
|
lanrangerLinkConnEntry OBJECT-TYPE
|
|
SYNTAX LanrangerLinkConnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about LANRANger Connection."
|
|
INDEX {lanrangerLinkConnPhysLink, lanrangerLinkConnAid,
|
|
lanrangerLinkConnMacAddr }
|
|
::= { lanrangerLinkConnTable 1 }
|
|
|
|
LanrangerLinkConnEntry ::=
|
|
SEQUENCE {
|
|
lanrangerLinkConnPhysLink
|
|
Integer32 ,
|
|
lanrangerLinkConnAid
|
|
Integer32,
|
|
lanrangerLinkConnMacAddr
|
|
MacAddress,
|
|
lanrangerLinkConnStatus
|
|
INTEGER,
|
|
lanrangerLinkConnDeviceType
|
|
INTEGER,
|
|
lanrangerLinkConnDeviceName
|
|
DisplayString,
|
|
lanrangerLinkConnDeviceSWVer
|
|
DisplayString,
|
|
lanrangerLinkConnNumLanStation
|
|
Integer32,
|
|
lanrangerLinkSyncStatus
|
|
INTEGER
|
|
}
|
|
|
|
lanrangerLinkConnPhysLink OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lanrangerLinkIndex for the physical link with which this logical link is associated."
|
|
::= { lanrangerLinkConnEntry 1 }
|
|
|
|
lanrangerLinkConnAid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each logical link. The maximum number
|
|
of logical links is 256, according to the LANRANger model.
|
|
The value for each logical link must remain constant at least
|
|
from one re-initialization of the network management agent to
|
|
the next. This index is the SPS address of the logical link.
|
|
noLogicLink = 65535"
|
|
::= { lanrangerLinkConnEntry 2 }
|
|
|
|
lanrangerLinkConnMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the device that the logical link is connected to
|
|
on the remote LAN."
|
|
::= { lanrangerLinkConnEntry 3 }
|
|
|
|
lanrangerLinkConnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1), -- for router link
|
|
none (2), -- no connection
|
|
fail (3),
|
|
connect (4),
|
|
wait (5),
|
|
down (6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link connection status."
|
|
::= { lanrangerLinkConnEntry 4 }
|
|
|
|
lanrangerLinkConnDeviceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tre1 (1),
|
|
tre8 (2),
|
|
tre1D (3),
|
|
tre8D (4),
|
|
tre8M (5),
|
|
rrTre (6),
|
|
rrTre1D (7),
|
|
rrTre8D (8),
|
|
iTre1 (9),
|
|
iTre2 (10),
|
|
mpTre8 (11),
|
|
kTre8 (12),
|
|
treRasA (13),
|
|
treRasS (14),
|
|
trePCAsync(15),
|
|
trePCSync (16),
|
|
mbe1 (17),
|
|
mbe8 (18),
|
|
mbe1D (19),
|
|
mbe8D (20),
|
|
ete8M (21),
|
|
iEre1 (22),
|
|
iEe2 (23),
|
|
mpMbe8 (24),
|
|
kMbe8 (25),
|
|
mbePCAsync(26),
|
|
mbePCSync (27),
|
|
mbeRasA (28),
|
|
mbeRasS (29),
|
|
other(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of device that the logical link is connected to on the remote LAN."
|
|
::= { lanrangerLinkConnEntry 5 }
|
|
|
|
lanrangerLinkConnDeviceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The logical name of the device that the logical link is connected to on the remote LAN."
|
|
::= { lanrangerLinkConnEntry 6 }
|
|
|
|
lanrangerLinkConnDeviceSWVer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SW Version of the device that the logical link is
|
|
connected to, on the remote LAN."
|
|
::= { lanrangerLinkConnEntry 7 }
|
|
|
|
lanrangerLinkConnNumLanStation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of stations of the remote LAN."
|
|
::= { lanrangerLinkConnEntry 8 }
|
|
|
|
lanrangerLinkSyncStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
synchronized (1),
|
|
syncNotObtained (2),
|
|
waitForSync (3),
|
|
codDisconnected (4),
|
|
lcp (5),
|
|
ip (6),
|
|
ipvj (7),
|
|
ipx (8),
|
|
ipIpx (9),
|
|
ipvj-ipx (10),
|
|
mlPpp (11),
|
|
mlPpp-ip (12),
|
|
mlPpp-ip-ipvj (13),
|
|
mlPpp-ip-ipx (14),
|
|
mlPpp-ipvj-ipx (15),
|
|
mlPpp-ipx (16),
|
|
frUp (17),
|
|
frDown (18),
|
|
dlciUp (19),
|
|
dlciDown (20),
|
|
extLoop (21),
|
|
ipcp (22),
|
|
lcpIpcp (23),
|
|
redAlarm (24),
|
|
yellowAlarm (26),
|
|
localSyncLoss (27),
|
|
remoteSyncLoss (28),
|
|
networkLoop (29),
|
|
networkLoopRedAlarm (30),
|
|
networkLoopYelAlarm (31),
|
|
networkLocSyncLoss (32),
|
|
networkRemSyncLoss (33),
|
|
fdlLoop (34),
|
|
fdlLoopRedAlarm (35),
|
|
fdlLoopYellowAlarm (36),
|
|
fdlLoopLocSyncLoss (37),
|
|
fdlLoopRemSyncLoss (38),
|
|
loopback (39), -- User Loop
|
|
loopbackLocSyncLoss (40),
|
|
loopbackRemSyncLoss (41)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Sync link status."
|
|
::= { lanrangerLinkConnEntry 9 }
|
|
|
|
|
|
--Modem Table
|
|
|
|
lanrangerModemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Modem entries. The number of entries is
|
|
up to ifIndex."
|
|
::= { lanrangerInterface 3 }
|
|
|
|
lanrangerModemEntry OBJECT-TYPE
|
|
SYNTAX LanrangerModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LANRANger-specific parameter values for a Modem."
|
|
INDEX {lanrangerModemLinkIndex }
|
|
::= { lanrangerModemTable 1 }
|
|
|
|
LanrangerModemEntry ::=
|
|
SEQUENCE {
|
|
lanrangerModemLinkIndex
|
|
Integer32,
|
|
lanrangerModemName
|
|
DisplayString,
|
|
lanrangerModemSettingString
|
|
DisplayString,
|
|
lanrangerModemAutobaudingSpeed
|
|
INTEGER,
|
|
lanrangerModemResetBeforeSetup
|
|
INTEGER,
|
|
lanrangerModemAnalyzeAnswers
|
|
INTEGER,
|
|
lanrangerModemSpeaker
|
|
INTEGER,
|
|
lanrangerModemDialingNumber
|
|
DisplayString,
|
|
lanrangerModemDialRetries
|
|
Integer32,
|
|
wrLocalDialBackNumber
|
|
DisplayString,
|
|
wrRingsBeforeAnswer
|
|
Integer32
|
|
}
|
|
|
|
lanrangerModemLinkIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of asynchronous ports of the link, according to
|
|
ifIndex.
|
|
Synchronous ports will not appear in this table. Their
|
|
port number will be skipped."
|
|
::= { lanrangerModemEntry 1 }
|
|
|
|
|
|
lanrangerModemName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Modem Name identifier for MBE/TRE.
|
|
Up to 50 characters."
|
|
::= { lanrangerModemEntry 2 }
|
|
|
|
lanrangerModemSettingString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Modem setting String.
|
|
Up to 80 characters."
|
|
::= { lanrangerModemEntry 3 }
|
|
|
|
|
|
lanrangerModemAutobaudingSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(2),
|
|
enable (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable autobauding.
|
|
When the Autobauding feature is enabled, the MBE/TRE
|
|
automatically ranges over various Baud rates, starting
|
|
with 115.2 Kbps, until the correct Baud rate of the modem
|
|
is detected. "
|
|
::= { lanrangerModemEntry 4 }
|
|
|
|
|
|
lanrangerModemResetBeforeSetup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (2),
|
|
yes(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the modem before setup is performed.
|
|
It is recommended to reset the modem before modem setup
|
|
session. "
|
|
::= { lanrangerModemEntry 5 }
|
|
|
|
|
|
lanrangerModemAnalyzeAnswers OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(2),
|
|
enable (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable this option if a modem using non-standard answering is used.
|
|
When this mode is enabled, the MBE/TRE awaits modem answers
|
|
'CONNECT', 'CARRIER', or 'OK', after it transmits a modem command.
|
|
Modem answers acknowledge, that a specific command has been executed.
|
|
If this option is not enabled, the MBE/TRE waits for a modem answer
|
|
for three seconds. If no answer has been received during this period,
|
|
the MBE/TRE continues functioning as if the modem command was successfully
|
|
executed. However, when dialing out, the MBE/TRE waits for one minute
|
|
for connection."
|
|
::= { lanrangerModemEntry 6 }
|
|
|
|
lanrangerModemSpeaker OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (2),
|
|
on (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Toggle the Modem Speaker On or Off . "
|
|
::= { lanrangerModemEntry 7 }
|
|
|
|
|
|
lanrangerModemDialingNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Various command switches listed in Modem Dialing Number Menu
|
|
allows selection of tone, pulse-dialing, or various wait states.
|
|
P - Set Pulse dialing number .
|
|
T - Set Tone dialing number .
|
|
W - Wait for dialing tone before proceeding.
|
|
' - Pause for 2 seconds .
|
|
@ - Wait for silence, one ring, followed by 5 sec. of silence .
|
|
|
|
The Dialing Number will include both digits and letter/s
|
|
of the command switches. The order and validity will be
|
|
on user's responsibility.
|
|
The DisplayString can have up to 40 characters."
|
|
::= { lanrangerModemEntry 8 }
|
|
|
|
|
|
wrLocalDialBackNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is the number that the Remote Modem will use to call the local
|
|
Modem at Dial Back.
|
|
|
|
Various command switches listed in Modem Dialing Number Menu
|
|
allows selection of tone, pulse-dialing, or various wait states.
|
|
P - Set Pulse dialing number .
|
|
T - Set Tone dialing number .
|
|
W - Wait for dialing tone before proceeding.
|
|
' - Pause for 2 seconds .
|
|
@ - Wait for silence, one ring, followed by 5 sec. of silence .
|
|
|
|
The Dialing Number will include both digits and letter/s
|
|
of the command switches. The order and validity will be
|
|
on user's responsibility.
|
|
The DisplayString can have up to 40 characters."
|
|
::= { lanrangerModemEntry 9 }
|
|
|
|
|
|
wrRingsBeforeAnswer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines which ring the modem will wait to answer the
|
|
phone on."
|
|
::= { lanrangerModemEntry 10 }
|
|
|
|
|
|
|
|
lanrangerModemDialRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of dialing retries requested.
|
|
Default = 0"
|
|
::= { lanrangerModemEntry 11}
|
|
|
|
--Packet Switch Table
|
|
|
|
lanrangerLinkPktSwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerLinkPktSwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of X.25/FR modules entries. The number of entries is
|
|
up to ifIndex."
|
|
::= { lanrangerInterface 4 }
|
|
|
|
lanrangerLinkPktSwEntry OBJECT-TYPE
|
|
SYNTAX LanrangerLinkPktSwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LANRANger-specific parameter values for X.25/FR modules."
|
|
INDEX {lanrangerLinkPktSwIndex }
|
|
::= { lanrangerLinkPktSwTable 1 }
|
|
|
|
LanrangerLinkPktSwEntry ::=
|
|
SEQUENCE {
|
|
lanrangerLinkPktSwIndex
|
|
Integer32,
|
|
lanrangerLinkPktSwType
|
|
INTEGER,
|
|
lanrangerLinkPktSwControlSignal
|
|
INTEGER,
|
|
lanrangerLinkPktSwSpeed
|
|
Integer32,
|
|
lanrangerLinkPktSwConfigParity
|
|
INTEGER,
|
|
lanrangerLinkPktSwConfigStopBit
|
|
INTEGER,
|
|
lanrangerLinkPktSwResetModule
|
|
INTEGER
|
|
}
|
|
|
|
lanrangerLinkPktSwIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each X.25/FR of the link, according to
|
|
numbering system of ifIndex. The maximum number of links is
|
|
ifIndex. The value for each link must remain constant at
|
|
least from one re-initialization of the network management
|
|
agent to the next."
|
|
::= { lanrangerLinkPktSwEntry 1 }
|
|
|
|
lanrangerLinkPktSwType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
x25FRChannel (1),
|
|
x25FRConfig (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet Switch Type."
|
|
::= { lanrangerLinkPktSwEntry 2 }
|
|
|
|
lanrangerLinkPktSwControlSignal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(2),
|
|
on (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet Switch control command. "
|
|
::= { lanrangerLinkPktSwEntry 3 }
|
|
|
|
lanrangerLinkPktSwSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Pkt Switch port's speed in bits per second.
|
|
Range: 1200bps .. 1544000bps"
|
|
::= { lanrangerLinkPktSwEntry 4 }
|
|
|
|
lanrangerLinkPktSwConfigParity OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), odd(2), even(3), notApplicable(255)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Pkt Switch Config port's character parity bit.
|
|
Applicable only for x25FRConfigChannel. For x25FRChannel
|
|
the value notApplicable applies."
|
|
::= { lanrangerLinkPktSwEntry 5 }
|
|
|
|
lanrangerLinkPktSwConfigStopBit OBJECT-TYPE
|
|
SYNTAX INTEGER { one(1), two(2), notApplicable(255) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Pkt Switch Config port's number of stop bits.
|
|
Applicable only for x25FRConfigChannel. For x25FRChannel
|
|
the value notApplicable applies."
|
|
::= { lanrangerLinkPktSwEntry 6 }
|
|
|
|
lanrangerLinkPktSwResetModule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(2),
|
|
on (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset command to Pkt Switch module.
|
|
Applicable only for x25FRChannel.
|
|
The command will have no effect on x25FRConfigChannel."
|
|
::= { lanrangerLinkPktSwEntry 7 }
|
|
|
|
|
|
|
|
-- lanrangerStation group contains a list of remote workstations and related information
|
|
|
|
lanrangerStation OBJECT IDENTIFIER ::= {lanranger 3}
|
|
|
|
lanrangerStationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about the stations
|
|
on the remote LAN(s).
|
|
A remote LANRANger contains a list of stations on its
|
|
LAN, while a main LANRANger contains a list of
|
|
stations at all the remote sites it is connected to."
|
|
::= { lanrangerStation 1 }
|
|
|
|
lanrangerStationEntry OBJECT-TYPE
|
|
SYNTAX LanrangerStationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a specific station, that the LANRANger
|
|
lists as being on a remote LAN."
|
|
INDEX { lanrangerStationPhysLink, lanrangerStationLogLink, lanrangerStationAddress}
|
|
::= { lanrangerStationTable 1 }
|
|
|
|
LanrangerStationEntry ::=
|
|
SEQUENCE {
|
|
lanrangerStationPhysLink
|
|
Integer32,
|
|
lanrangerStationLogLink
|
|
Integer32,
|
|
lanrangerStationAddress
|
|
MacAddress,
|
|
lanrangerStationStatus
|
|
INTEGER,
|
|
lanrangerStationSpoofingStatus
|
|
INTEGER
|
|
}
|
|
|
|
lanrangerStationPhysLink OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the physical link that is connected to the
|
|
remote LAN on which the station with the associated
|
|
instance of lanrangerStationAddress is located. The number
|
|
is the same as the ifIndex of the link. The value will be
|
|
zero on a remote LANRANger"
|
|
::= { lanrangerStationEntry 1 }
|
|
|
|
lanrangerStationLogLink OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the logical link that is connected
|
|
to the remote LAN on which the station with the associated
|
|
instance of lanrangerStationAddress is located. The value
|
|
will be zero on a remote LANRANger.
|
|
noLogicLink = 65535"
|
|
::= { lanrangerStationEntry 2 }
|
|
|
|
lanrangerStationAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unicast MAC address of a station that the LANRANger
|
|
lists as being on a remote LAN."
|
|
::= { lanrangerStationEntry 3 }
|
|
|
|
lanrangerStationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
learned(2),
|
|
self (3),
|
|
static (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. The meanings of the
|
|
values are:
|
|
unknown(1) :
|
|
learned(2) : the value of the corresponding
|
|
instance of lanrangerStationAddress was
|
|
learned and is being used.
|
|
|
|
self(3) : the value of the corresponding
|
|
instance of lanrangerStationAddress
|
|
represents the LANRANger's address.
|
|
|
|
|
|
static(4) : the value of the corresponding
|
|
instance of lanrangerStationAddress is
|
|
also the value of an existing
|
|
instance of lanrangerStaticAddress."
|
|
::= { lanrangerStationEntry 4 }
|
|
|
|
lanrangerStationSpoofingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(2),
|
|
on (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The spoofing status of this entry."
|
|
::= { lanrangerStationEntry 5 }
|
|
|
|
|
|
|
|
lanrangerLanMaxStations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of stations in the station table."
|
|
::= { lanrangerStation 2 }
|
|
|
|
lanrangerLanCurrentStations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of stations in the station table."
|
|
::= { lanrangerStation 3 }
|
|
|
|
--Permanent Stations
|
|
|
|
|
|
lanrangerPermanentStation OBJECT IDENTIFIER
|
|
::= { lanrangerStation 4 }
|
|
|
|
lanrangerPermanentMaxEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in the permanent stations table."
|
|
::= { lanrangerPermanentStation 1 }
|
|
|
|
lanrangerPermanentCurrentEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the permanent stations table."
|
|
::= { lanrangerPermanentStation 2 }
|
|
|
|
|
|
lanrangerPermanentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerPermanentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing address information
|
|
configured into the LANRANger by (local or network)
|
|
management, specifying addresses on a remote LAN.
|
|
This table objects can be set only on a Remote LANRANger."
|
|
::= { lanrangerPermanentStation 3 }
|
|
|
|
lanrangerPermanentEntry OBJECT-TYPE
|
|
SYNTAX LanrangerPermanentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address information configured into the remote LANRANger
|
|
by (local or network) management specifying addresses
|
|
on a remote LAN."
|
|
INDEX { lanrangerPermanentIfIndex, lanrangerPermanentLogLink,
|
|
lanrangerPermanentAddress }
|
|
::= { lanrangerPermanentTable 1 }
|
|
|
|
LanrangerPermanentEntry ::=
|
|
SEQUENCE {
|
|
lanrangerPermanentIfIndex
|
|
Integer32,
|
|
lanrangerPermanentLogLink
|
|
Integer32,
|
|
lanrangerPermanentAddress
|
|
MacAddress,
|
|
lanrangerPermanentOperation
|
|
INTEGER
|
|
}
|
|
lanrangerPermanentIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the physical link that is connected to
|
|
the remote LAN, on which the station with the
|
|
associated instance of lanrangerStationAddress is
|
|
located.
|
|
The number is the same as the ifIndex of the link.
|
|
This data is interesting for main LANRANger only."
|
|
::= { lanrangerPermanentEntry 1 }
|
|
|
|
lanrangerPermanentLogLink OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the logical link that is connected to the
|
|
remote LAN, on which the station with the associated
|
|
instance of lanrangerPermanentAddress is located.
|
|
The value will be noLogicLink on a remote LANRANger.
|
|
This data is interesting for main LANRANger only.
|
|
noLogicLink = 65535"
|
|
::= { lanrangerPermanentEntry 2 }
|
|
|
|
lanrangerPermanentAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address entered by management to this entry.
|
|
Only the remote LANRANger will accept Set for this object !
|
|
---------------- "
|
|
::= { lanrangerPermanentEntry 3 }
|
|
|
|
lanrangerPermanentOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
delete (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
active(1) - this entry is currently in use
|
|
and will remain so even after the next
|
|
reset of the LANRANger.
|
|
delete(2) - writing this value to the object
|
|
removes the corresponding entry.
|
|
Only the remote LANRANger will accept Set for this object !
|
|
---------------- "
|
|
::= { lanrangerPermanentEntry 4 }
|
|
|
|
|
|
--IP Stations
|
|
|
|
lanrangerIpStation OBJECT IDENTIFIER
|
|
::= { lanrangerStation 5 }
|
|
|
|
lanrangerIpPermanentAvailableEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The available number of entries in the IP permanent stations
|
|
table."
|
|
::= { lanrangerIpStation 1 }
|
|
|
|
lanrangerIpPermanentCurrentEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the IP permanent station table."
|
|
::= { lanrangerIpStation 2 }
|
|
|
|
|
|
-- The IP Permanent Stations table will be supported via the
|
|
-- IP Forward table of RFC1354.MIB.
|
|
|
|
|
|
lanrangerSpoofingStation OBJECT IDENTIFIER
|
|
::= {lanrangerStation 6}
|
|
|
|
lanrangerSpoofingMaxEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in the Spoofing station
|
|
table."
|
|
::= {lanrangerSpoofingStation 1}
|
|
|
|
lanrangerSpoofingCurrentEntries OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the Spoofing station
|
|
table."
|
|
::= {lanrangerSpoofingStation 2}
|
|
|
|
lanrangerSpoofingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanrangerSpoofingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Spoofing entries. The number of entries is
|
|
up to the current number of entries, according to the
|
|
LANRANger model.
|
|
Only the LOCAL LANRANger will show this table !
|
|
--------------- "
|
|
|
|
::= { lanrangerSpoofingStation 3 }
|
|
|
|
lanrangerSpoofingEntry OBJECT-TYPE
|
|
SYNTAX LanrangerSpoofingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spoofing parameters per entry of the Spoofing table."
|
|
INDEX {lanrangerSpoofingGroup, lanrangerSpoofingMacAddress }
|
|
::= { lanrangerSpoofingTable 1 }
|
|
|
|
LanrangerSpoofingEntry ::=
|
|
SEQUENCE {
|
|
lanrangerSpoofingGroup
|
|
Integer32,
|
|
lanrangerSpoofingMacAddress
|
|
MacAddress ,
|
|
lanrangerSpoofingAging
|
|
Integer32,
|
|
lanrangerSpoofingTimeLeft
|
|
Integer32
|
|
}
|
|
|
|
lanrangerSpoofingGroup OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The spoofing group.
|
|
Only the LOCAL Lanranger will show this table ! "
|
|
::= { lanrangerSpoofingEntry 1 }
|
|
|
|
|
|
lanrangerSpoofingMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" MAC Address of the Remote Lanrangers.
|
|
Only the LOCAL Lanranger will show this table ! "
|
|
::= { lanrangerSpoofingEntry 2 }
|
|
|
|
lanrangerSpoofingAging OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Aging time defined for a whole group, in minutes.
|
|
Only the LOCAL Lanranger will show this table ! "
|
|
::= { lanrangerSpoofingEntry 3 }
|
|
|
|
lanrangerSpoofingTimeLeft OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Time until aging expires, per station, in minutes.
|
|
Only the LOCAL Lanranger will show this table ! "
|
|
::= { lanrangerSpoofingEntry 4 }
|
|
|
|
|
|
--PPP Table for the WebRanger
|
|
|
|
wrPPPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WrPPPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains only parameters that do not exist in the PPP
|
|
standard MIBS.
|
|
The table contains a list of PPP entries.
|
|
The number of entries is up to ifIndex."
|
|
::= { lanrangerInterface 5 }
|
|
|
|
wrPPPEntry OBJECT-TYPE
|
|
SYNTAX WrPPPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LANRANger-specific parameter values for a PPP."
|
|
INDEX {ifIndex }
|
|
::= { wrPPPTable 1 }
|
|
|
|
WrPPPEntry ::=
|
|
SEQUENCE {
|
|
wrPPPCompressionHeaderField INTEGER,
|
|
wrPPPCompressionProtocolFields INTEGER,
|
|
wrPPPSTACCompressionType INTEGER,
|
|
wrPPPAuthProtocol INTEGER,
|
|
wrPPPSecurityType INTEGER,
|
|
wrPPPUserName SnmpAdminString,
|
|
wrPPPPassword SnmpAdminString,
|
|
wrPPPLinkActiveTime Integer32,
|
|
wrPPPIPCPSubnetMaskNegotiation InterfaceIndexOrZero,
|
|
wrPPPLinkControlProtocolStatus INTEGER,
|
|
wrPPPAuthenticationStatus INTEGER,
|
|
wrPPPIpcpStatus INTEGER,
|
|
wrPPPAssignedIPAddress IpAddress,
|
|
wrPPPActualAuthProtocol INTEGER,
|
|
wrPPPIpTranslationMode INTEGER,
|
|
wrPPPTranslatedIpAddr IpAddress
|
|
}
|
|
|
|
wrPPPCompressionHeaderField OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ compressionOff (2),
|
|
compressionOn (3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This configuration option provides a method to negotiate the
|
|
compression of the Data Link Layer Address and Control fields.
|
|
This configuration option is sent to inform the peer that the
|
|
implementation can receive compressed Address and Control fields."
|
|
::= { wrPPPEntry 1 }
|
|
|
|
wrPPPCompressionProtocolFields OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ compressionOff (2),
|
|
compressionOn (3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This configuration option provides a method to negotiate the
|
|
compression of the PPP Protocol field. This configuration option
|
|
is sent to inform the peer that the implementation can receive
|
|
such single octet Protocol fields. "
|
|
::= { wrPPPEntry 2 }
|
|
|
|
wrPPPSTACCompressionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ disable (1),
|
|
noHistory (2),
|
|
lCB (3),
|
|
sequence (4),
|
|
extended (5) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The PPP compression control protocol provides a method to negotiate
|
|
and utilize compression protocol over PPP encapsulated links.
|
|
These are Different types of data compression algorithm for PPP
|
|
encapsulated packets. "
|
|
::= { wrPPPEntry 3 }
|
|
|
|
wrPPPAuthProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noneNone (1),
|
|
chapNone (2),
|
|
chapPap (3),
|
|
chapChap (4),
|
|
papNone (5),
|
|
papPap (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of authentication protocol being used. The left parameter
|
|
is the maximum authentication, the right parameter is minimum authentication."
|
|
::= { wrPPPEntry 4 }
|
|
|
|
wrPPPSecurityType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
host (1),
|
|
guest (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of unit."
|
|
::= { wrPPPEntry 5 }
|
|
|
|
|
|
wrPPPUserName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..36))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPP User name."
|
|
::= { wrPPPEntry 6 }
|
|
|
|
wrPPPPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..36))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPP Password ."
|
|
::= { wrPPPEntry 7 }
|
|
|
|
wrPPPLinkActiveTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPP link active time in seconds
|
|
Values range: 2 - 900.
|
|
Default value = 2 "
|
|
::= { wrPPPEntry 8 }
|
|
|
|
wrPPPIPCPSubnetMaskNegotiation OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ifIndex of the link (LAN port)
|
|
through which IPCP Subnet Mask negotiation is allowed.
|
|
The distinguished value of zero may be used if no link
|
|
is enabled for IPCP Subnet Mask negotiation.
|
|
|
|
For LA-110, IPCP Subnet Mask support allows Customer Premises
|
|
Equipment (CPE) to connect to a Broadband Access Server (BAS)
|
|
and obtain an IP address and subnet range that the CPE can
|
|
use to populate the DHCP server database. The IP address
|
|
is also used to configure an IP interface over the LAN port.
|
|
The IP Address is dynamically allocated by the DHCP Server,
|
|
using the DHCP Pool that was allocated over the PPP connection.
|
|
In order to connect one of the LANs to Subnet Mask Negotiation,
|
|
its IP Address should be 0.0.0.0. When the IP Address is allocated
|
|
from the PPP, the 0.0.0.0 IP Address is replaced in the data base
|
|
by the allocated IP Address. Only one Subnet Mask Negotiation on WAN
|
|
interface can be enabled at the same time in order to avoid
|
|
allocating the LAN IP address according to a few WAN
|
|
interfaces (a one-on-one connection).
|
|
The linked LAN interface can be deleted only after disabling the
|
|
Subnet Mask Negotiation on the PPP connection."
|
|
::= { wrPPPEntry 9 }
|
|
|
|
wrPPPLinkControlProtocolStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
close (2),
|
|
open (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPP Link Control Protocol(LCP) Status"
|
|
::= { wrPPPEntry 10 }
|
|
|
|
wrPPPAuthenticationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
failed (2),
|
|
passed (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPP Authentication status."
|
|
::= { wrPPPEntry 11 }
|
|
|
|
wrPPPIpcpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
close (2),
|
|
open (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPCP (IP Control Protocol) status."
|
|
::= { wrPPPEntry 12}
|
|
|
|
wrPPPAssignedIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address assigned by PPP."
|
|
::= { wrPPPEntry 13}
|
|
|
|
wrPPPActualAuthProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none (1),
|
|
pap (2),
|
|
chap (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Actual type of Authentication Protocol that is used."
|
|
::= { wrPPPEntry 14 }
|
|
|
|
wrPPPIpTranslationMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable (2),
|
|
enable (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables the IP Translation Mode."
|
|
::= { wrPPPEntry 15 }
|
|
|
|
wrPPPTranslatedIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Translated IP Address.
|
|
It is relevant only when IP Translation Mode is 'enable'."
|
|
::= { wrPPPEntry 16 }
|
|
|
|
|
|
-- ML-PPP (Multilink PPP) Table
|
|
|
|
wrMLPPPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WrMLPPPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of ML-PPP entries."
|
|
::= { lanrangerInterface 6 }
|
|
|
|
wrMLPPPEntry OBJECT-TYPE
|
|
SYNTAX WrMLPPPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specific parameter values for a ML-PPP."
|
|
INDEX {ifIndex }
|
|
::= { wrMLPPPTable 1 }
|
|
|
|
WrMLPPPEntry ::=
|
|
SEQUENCE {
|
|
wrMLPPPEpDiscriminatorEnable INTEGER,
|
|
wrMLPPPReorderingEnable INTEGER,
|
|
wrMLPPPTxQueueSize Unsigned32
|
|
}
|
|
|
|
wrMLPPPEpDiscriminatorEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (2),
|
|
yes (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Endpoint Discriminator Option is enabled.
|
|
|
|
The Endpoint Discriminator Option represents identification of the
|
|
system transmitting the packet. This option advises a system that
|
|
the peer on this link could be the same as the peer on another
|
|
existing link. If the option distinguishes this peer from all
|
|
others, a new bundle MUST be established from the link being
|
|
negotiated. If this option matches the class and address of some
|
|
other peer of an existing link, the new link MUST be joined to the
|
|
bundle containing the link to the matching peer or MUST establish a
|
|
new bundle.
|
|
|
|
For more information about the Endpoint Discriminator Option -
|
|
see RFC-1990 (The PPP Multilink Protocol)."
|
|
::= { wrMLPPPEntry 1 }
|
|
|
|
wrMLPPPReorderingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
no (2),
|
|
yes (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether packets reordering option is enabled.
|
|
yes - packets received from MLPPP not in order are
|
|
reordered, according to sequence number,
|
|
before being transmitted to egress port.
|
|
no - received packets are transmitted in the
|
|
same order as they arrived."
|
|
::= { wrMLPPPEntry 2 }
|
|
|
|
wrMLPPPTxQueueSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of frames in the Tx Queue."
|
|
::= { wrMLPPPEntry 3 }
|
|
|
|
-- PPPoE (Point-to-Point Protocol over Ethernet)
|
|
|
|
pPPoE OBJECT IDENTIFIER ::= { lanrangerInterface 7 }
|
|
|
|
pPPoETable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PPPoEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PPPoE (Point-to-Point Protocol over Ethernet) Table."
|
|
::= { pPPoE 1 }
|
|
|
|
pPPoEEntry OBJECT-TYPE
|
|
SYNTAX PPPoEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the PPPoE Table."
|
|
INDEX { pPPoECnfgIdx, pPPoEID }
|
|
::= { pPPoETable 1 }
|
|
|
|
PPPoEEntry ::= SEQUENCE {
|
|
pPPoECnfgIdx Unsigned32,
|
|
pPPoEID Unsigned32,
|
|
pPPoERowStatus RowStatus,
|
|
pPPoEACName SnmpAdminString,
|
|
pPPoEServiceName SnmpAdminString,
|
|
pPPoEEntityPointer RowPointer,
|
|
pPPoESessionStatus INTEGER,
|
|
pPPoESessionID Unsigned32,
|
|
pPPoERemoteMacAddr MacAddress,
|
|
pPPoENoOfUsages Unsigned32,
|
|
pPPoESchedRestartMode INTEGER,
|
|
pPPoESchedRestartTime DisplayString,
|
|
pPPoESchedRestartRandomRange Unsigned32,
|
|
pPPoESchedRestartActualTime DisplayString,
|
|
pPPoEInitDelayRandomRange Unsigned32,
|
|
pPPoEInitActualDelay Unsigned32,
|
|
pPPoEVlanTagging INTEGER,
|
|
pPPoEVlanId Unsigned32,
|
|
pPPoEVlanPriority Unsigned32
|
|
}
|
|
|
|
pPPoECnfgIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Usually the ifIndex of the PPP link the PPPoE session is on.
|
|
Some applications may use this index otherwise."
|
|
::= { pPPoEEntry 1 }
|
|
|
|
pPPoEID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE session unique identifier."
|
|
::= { pPPoEEntry 2 }
|
|
|
|
pPPoERowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables the user to create/delete entries in this table."
|
|
::= { pPPoEEntry 3 }
|
|
|
|
pPPoEACName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The access concentrator
|
|
the PPPoE session should be established with."
|
|
::= { pPPoEEntry 4 }
|
|
|
|
pPPoEServiceName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service requested on the PPPoE session."
|
|
::= { pPPoEEntry 5 }
|
|
|
|
pPPoEEntityPointer OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter represents the entity (interface/port etc)
|
|
that is connected to this PPPoE.
|
|
|
|
The value of this parameter is a pointer to an existing row of a table,
|
|
where the entity connected to this PPPoE is defined.
|
|
|
|
Example:
|
|
|
|
In case of an interface (from 2863.ifTable):
|
|
points to 'ifEntry' of corresponding row
|
|
= <ifEntry OID>.<ifIndex>
|
|
."
|
|
::= { pPPoEEntry 6 }
|
|
|
|
pPPoESessionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
down (2),
|
|
up (3),
|
|
lowerLayerDown (4),
|
|
adminDisabled (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"notApplicable - none of the other states applies
|
|
down - session not established
|
|
up - session established
|
|
lowerLayerDown - session not established due to lower layer failure
|
|
adminDisabled - a user has disabled the session"
|
|
::= { pPPoEEntry 7 }
|
|
|
|
pPPoESessionID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents PPPoE Session ID."
|
|
::= { pPPoEEntry 8 }
|
|
|
|
pPPoERemoteMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the MAC Address of the Access Concentrator,
|
|
with which the PPPoE session is established."
|
|
::= { pPPoEEntry 9 }
|
|
|
|
pPPoENoOfUsages OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of times this PPPoE is used."
|
|
::= { pPPoEEntry 10 }
|
|
|
|
pPPoESchedRestartMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
disable (2),
|
|
enable (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Scheduled Restart Mode."
|
|
::= { pPPoEEntry 11 }
|
|
|
|
pPPoESchedRestartTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Scheduled Restart Time.
|
|
It is relevant only when Scheduled Restart Mode is 'enable'."
|
|
::= { pPPoEEntry 12 }
|
|
|
|
pPPoESchedRestartRandomRange OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Scheduled Restart Random Range (in seconds).
|
|
It is relevant only when Scheduled Restart Mode is 'enable'.
|
|
|
|
A scheduled restart Random VALUE (number of seconds) is selected
|
|
within this Random Range.
|
|
|
|
This VALUE is added to configured Scheduled Restart Time, so that
|
|
Actual Restart Time = Configured Restart Time + VALUE,
|
|
in order to create a differentiation between all PPPoE entities
|
|
with the same configured Scheduled Restart Time.
|
|
|
|
Note:
|
|
When Random Range is 0 -->
|
|
Random VALUE must be 0 -->
|
|
Actual Restart Time = Configured Restart Time."
|
|
::= { pPPoEEntry 13 }
|
|
|
|
pPPoESchedRestartActualTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Scheduled Restart Actual Time.
|
|
It is relevant only when Scheduled Restart Mode is 'enable'.
|
|
For calculation of this time - see pPPoESchedRestartRandomRange."
|
|
::= { pPPoEEntry 14 }
|
|
|
|
pPPoEInitDelayRandomRange OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Initialization Delay Random Range (in seconds).
|
|
An initialization DELAY (number of seconds) is selected within this Random Range.
|
|
|
|
This DELAY is used to delay the initialization of every PPPoE session,
|
|
meaning that whenever a PPPoE session is reestablished,
|
|
the device will send the first PPPoE initialization packet (PADI)
|
|
only after this DELAY (in seconds).
|
|
|
|
Note:
|
|
When Random Range = 0 -->
|
|
there will be no delay in the initialization process."
|
|
::= { pPPoEEntry 15 }
|
|
|
|
pPPoEInitActualDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Initialization Delay (in seconds),
|
|
as selected within Initialization Delay Random Range (pPPoEInitDelayRandomRange)."
|
|
::= { pPPoEEntry 16 }
|
|
|
|
pPPoEVlanTagging OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable (1),
|
|
untag (2),
|
|
tag (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the VLAN Tagging."
|
|
::= { pPPoEEntry 17 }
|
|
|
|
pPPoEVlanId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the VLAN ID."
|
|
::= { pPPoEEntry 18 }
|
|
|
|
pPPoEVlanPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the VLAN Priority."
|
|
::= { pPPoEEntry 19 }
|
|
|
|
|
|
|
|
pppoeClientReceivedTagsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PppoeClientReceivedTagsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the PPPoE tags
|
|
received in the offer (PADO packet) of the access concentrator
|
|
with which a PPPoE session has been established."
|
|
::= { pPPoE 2 }
|
|
|
|
pppoeClientReceivedTagsEntry OBJECT-TYPE
|
|
SYNTAX PppoeClientReceivedTagsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the details of one PPPoE tag."
|
|
INDEX { pPPoECnfgIdx, pPPoEID, pppoeClientReceivedTagNumber }
|
|
::= { pppoeClientReceivedTagsTable 1 }
|
|
|
|
PppoeClientReceivedTagsEntry ::= SEQUENCE {
|
|
pppoeClientReceivedTagNumber Unsigned32,
|
|
pppoeClientReceivedTagType Unsigned32,
|
|
pppoeClientReceivedTagValue SnmpAdminString
|
|
}
|
|
|
|
pppoeClientReceivedTagNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A running index. 1 for the first tag received
|
|
in the PADO packet, 2 for the second, and so on."
|
|
::= { pppoeClientReceivedTagsEntry 1 }
|
|
|
|
pppoeClientReceivedTagType OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TAG_TYPE of the PPPoE tag in the received packet."
|
|
::= { pppoeClientReceivedTagsEntry 2 }
|
|
|
|
pppoeClientReceivedTagValue OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TAG_VALUE of the PPPoE tag in the received packet."
|
|
::= { pppoeClientReceivedTagsEntry 3 }
|
|
|
|
|
|
|
|
|
|
PppAuthMethod ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Methods used in the PPP authentication phase.
|
|
noAuth is used if authentication is not required."
|
|
SYNTAX INTEGER {
|
|
noAuth (1),
|
|
chap (2),
|
|
pap (3)
|
|
}
|
|
|
|
PppAuthStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States of the PPP authentication phase.
|
|
notApplicable is used if authentication is not required."
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
initial (2),
|
|
completed (3),
|
|
inProgress (4),
|
|
failed (5)
|
|
}
|
|
|
|
PppState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States of the state machine used in some PPP phases (rfc 1661, 4.2)."
|
|
SYNTAX INTEGER {
|
|
initial (1),
|
|
starting (2),
|
|
closed (3),
|
|
stopped (4),
|
|
closing (5),
|
|
stopping (6),
|
|
requestSent (7),
|
|
ackReceived (8),
|
|
ackSent (9),
|
|
opened (10)
|
|
}
|
|
|
|
pppSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PppSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains user credentials
|
|
used by various methods (CHAP, PAP...)
|
|
during the PPP authentication phase."
|
|
::= { lanrangerInterface 8 }
|
|
|
|
pppSecurityEntry OBJECT-TYPE
|
|
SYNTAX PppSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one authentication parameter or more,
|
|
depending of the entry's type."
|
|
INDEX { ifIndex, pppSecurityType, pppSecurityPriority }
|
|
::= { pppSecurityTable 1 }
|
|
|
|
PppSecurityEntry ::= SEQUENCE {
|
|
pppSecurityType INTEGER,
|
|
pppSecurityPriority Unsigned32,
|
|
pppSecurityRowStatus RowStatus,
|
|
pppSecurityDirection INTEGER,
|
|
pppSecurityIdentity SnmpAdminString,
|
|
pppSecuritySecret SnmpAdminString,
|
|
pppSecuritySecretType INTEGER
|
|
}
|
|
|
|
pppSecurityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
chapHostname (1),
|
|
chapPassword (2),
|
|
papUsername (3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the credentials in this entry.
|
|
chapHostname - hostname to send to the authenticator in CHAP
|
|
authentication, instead of the (by default) device sysName
|
|
chapPassword - default password to use in CHAP authentication,
|
|
if the authenticator does not appear in the user database
|
|
papUsername - userrname and password to use in PAP authentication."
|
|
::= { pppSecurityEntry 1 }
|
|
|
|
pppSecurityPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If there are multiple entries of the same type, one with
|
|
lower priority has precedence over one with higher priority."
|
|
::= { pppSecurityEntry 2 }
|
|
|
|
pppSecurityRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User credentials are added and removed by users using this object."
|
|
::= { pppSecurityEntry 3 }
|
|
|
|
pppSecurityDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localToRemote (1),
|
|
remoteToLocal (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction in which the credentials in this entry are used.
|
|
localToRemote - the device is authenticated by a peer
|
|
RemoteToLocal - The device authenticates a peer"
|
|
::= { pppSecurityEntry 4 }
|
|
|
|
pppSecurityIdentity OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string representing name, such as hostname or username,
|
|
to be used in the PPP authentication phase."
|
|
::= { pppSecurityEntry 5 }
|
|
|
|
pppSecuritySecret OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A password to be used in the PPP authentication phase.
|
|
The password is always saved in an encrypted form; if a
|
|
user sets a clear password, the device must encrypt it before
|
|
saving it in this object.
|
|
This object always returns an empty string when read."
|
|
::= { pppSecurityEntry 6 }
|
|
|
|
pppSecuritySecretType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off (1),
|
|
clear (2),
|
|
encrypted (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used by users to denote whether the string set
|
|
in pppSecuritySecret is a clear or encrypted password. The device
|
|
sets it to 'off' after saving the password in pppSecuritySecret."
|
|
DEFVAL { off }
|
|
::= { pppSecurityEntry 7 }
|
|
|
|
pppLinkStatusXTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PppLinkStatusXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains PPP monitoring objects.
|
|
It augments the standard pppLinkStatusTable (rfc 1471)."
|
|
::= { lanrangerInterface 9 }
|
|
|
|
pppLinkStatusXEntry OBJECT-TYPE
|
|
SYNTAX PppLinkStatusXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains monitoring objects of one PPP link."
|
|
AUGMENTS { pppLinkStatusEntry }
|
|
::= { pppLinkStatusXTable 1 }
|
|
|
|
PppLinkStatusXEntry ::= SEQUENCE {
|
|
pppLinkStatusXLcpState PppState,
|
|
pppLinkStatusXUsAuthProtocol PppAuthMethod,
|
|
pppLinkStatusXUsAuthState PppAuthStatus,
|
|
pppLinkStatusXUsAuthIdentity SnmpAdminString,
|
|
pppLinkStatusXPeerAuthProtocol PppAuthMethod,
|
|
pppLinkStatusXPeerAuthState PppAuthStatus,
|
|
pppLinkStatusXPeerAuthIdentity SnmpAdminString,
|
|
pppLinkStatusXIpcpState PppState,
|
|
pppLinkStatusXIpcpLocalIp InetAddressIPv4,
|
|
pppLinkStatusXIpcpLocalIpNegotiated TruthValue,
|
|
pppLinkStatusXIpcpRemoteIp InetAddressIPv4,
|
|
pppLinkStatusXIpv6cpState PppState,
|
|
pppLinkStatusXIpv6cpLocalIp InetAddressIPv6,
|
|
pppLinkStatusXIpv6cpLocalIpNegotiated TruthValue,
|
|
pppLinkStatusXIpv6cpRemoteIp InetAddressIPv6
|
|
}
|
|
|
|
pppLinkStatusXLcpState OBJECT-TYPE
|
|
SYNTAX PppState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LCP phase state."
|
|
::= { pppLinkStatusXEntry 1 }
|
|
|
|
pppLinkStatusXUsAuthProtocol OBJECT-TYPE
|
|
SYNTAX PppAuthMethod
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The method used by the peer to authenticate the device."
|
|
::= { pppLinkStatusXEntry 2 }
|
|
|
|
pppLinkStatusXUsAuthState OBJECT-TYPE
|
|
SYNTAX PppAuthStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the process of the peer authenticating the device."
|
|
::= { pppLinkStatusXEntry 3 }
|
|
|
|
pppLinkStatusXUsAuthIdentity OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identity used in the process of the peer authenticating the
|
|
device, or empty string if the peer does not authenticate the device."
|
|
::= { pppLinkStatusXEntry 4 }
|
|
|
|
pppLinkStatusXPeerAuthProtocol OBJECT-TYPE
|
|
SYNTAX PppAuthMethod
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The method used to authenticate the peer."
|
|
::= { pppLinkStatusXEntry 5 }
|
|
|
|
pppLinkStatusXPeerAuthState OBJECT-TYPE
|
|
SYNTAX PppAuthStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the process of authenticating the peer."
|
|
::= { pppLinkStatusXEntry 6 }
|
|
|
|
pppLinkStatusXPeerAuthIdentity OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identity used in the process of authenticating the peer,
|
|
or empty string if the peer is not required to be authenticated."
|
|
::= { pppLinkStatusXEntry 7 }
|
|
|
|
pppLinkStatusXIpcpState OBJECT-TYPE
|
|
SYNTAX PppState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPCP phase state."
|
|
::= { pppLinkStatusXEntry 8 }
|
|
|
|
pppLinkStatusXIpcpLocalIp OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address of this device, used for encapsulating IPv4 packets
|
|
in the PPP session.
|
|
If no IP address is used or if IPCP negotiation was not completed
|
|
this object is set to 0."
|
|
::= { pppLinkStatusXEntry 9 }
|
|
|
|
pppLinkStatusXIpcpLocalIpNegotiated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is true if the IPv4 address in pppLinkStatusXIpcpLocalIp
|
|
was negotiated with the peer, and false oterwise."
|
|
::= { pppLinkStatusXEntry 10 }
|
|
|
|
pppLinkStatusXIpcpRemoteIp OBJECT-TYPE
|
|
SYNTAX InetAddressIPv4
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address of remote device, used for encapsulating IPv4 packets
|
|
in the PPP session.
|
|
If no IP address is used or if IPCP negotiation was not completed
|
|
this object is set to 0."
|
|
::= { pppLinkStatusXEntry 11 }
|
|
|
|
pppLinkStatusXIpv6cpState OBJECT-TYPE
|
|
SYNTAX PppState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPV6CP phase state."
|
|
::= { pppLinkStatusXEntry 12 }
|
|
|
|
pppLinkStatusXIpv6cpLocalIp OBJECT-TYPE
|
|
SYNTAX InetAddressIPv6
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address of this device, used for encapsulating IPv6 packets
|
|
in the PPP session.
|
|
If no IP address is used or if IPV6CP negotiation was not completed
|
|
this object is set to 0."
|
|
::= { pppLinkStatusXEntry 13 }
|
|
|
|
pppLinkStatusXIpv6cpLocalIpNegotiated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is true if the IPv6 address in pppLinkStatusXIpv6cpLocalIp
|
|
was negotiated with the peer, and false oterwise."
|
|
::= { pppLinkStatusXEntry 14 }
|
|
|
|
pppLinkStatusXIpv6cpRemoteIp OBJECT-TYPE
|
|
SYNTAX InetAddressIPv6
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address of remote device, used for encapsulating IPv6 packets
|
|
in the PPP session.
|
|
If no IP address is used or if IPV6CP negotiation was not completed
|
|
this object is set to 0."
|
|
::= { pppLinkStatusXEntry 15 }
|
|
|
|
|
|
pppLinkConfigXTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PppLinkConfigXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure PPP sessions.
|
|
It augments the standard pppLinkConfigTable (rfc 1471)."
|
|
::= { lanrangerInterface 10 }
|
|
|
|
pppLinkConfigXEntry OBJECT-TYPE
|
|
SYNTAX PppLinkConfigXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains configuration of one PPP link."
|
|
AUGMENTS { pppLinkConfigEntry }
|
|
::= { pppLinkConfigXTable 1 }
|
|
|
|
PppLinkConfigXEntry ::= SEQUENCE {
|
|
pppLinkConfigXLowerLayer Unsigned32,
|
|
pppLinkConfigXRefuseChap TruthValue,
|
|
pppLinkConfigXRefuseNoAuth TruthValue,
|
|
pppLinkConfigXRefusePap TruthValue
|
|
}
|
|
|
|
pppLinkConfigXLowerLayer OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ifIndex of the lower layer (e.g. Ethernet) the PPP link is bound to,
|
|
or 0 if the PPP link is not bound to a lower layer."
|
|
::= { pppLinkConfigXEntry 1 }
|
|
|
|
pppLinkConfigXRefuseChap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the device will not accept being authenticated by CHAP."
|
|
DEFVAL { false }
|
|
::= { pppLinkConfigXEntry 2 }
|
|
|
|
pppLinkConfigXRefuseNoAuth OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the device will not accept not being authenticated."
|
|
DEFVAL { true }
|
|
::= { pppLinkConfigXEntry 3 }
|
|
|
|
pppLinkConfigXRefusePap OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, the device will not accept being authenticated by PAP."
|
|
DEFVAL { true }
|
|
::= { pppLinkConfigXEntry 4 }
|
|
|
|
|
|
-- Traps for use by the LANRANger
|
|
|
|
--NOTIFICATIONS
|
|
|
|
lanrangerEvents OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The events for the LANRANger."
|
|
::= { lanranger 0 }
|
|
|
|
lanrangerLogLinkUp NOTIFICATION-TYPE
|
|
OBJECTS { lanrangerLinkConnPhysLink, lanrangerLinkConnAid }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lanrangerLogLinkUp trap indicates that the indicated logical link is connected."
|
|
::= { lanrangerEvents 1 }
|
|
|
|
lanrangerLogLinkDown NOTIFICATION-TYPE
|
|
OBJECTS { lanrangerLinkConnPhysLink, lanrangerLinkConnAid }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lanrangerLogLinkDown trap indicates that the indicated logical link is disconnected."
|
|
::= { lanrangerEvents 2 }
|
|
|
|
lanrangerLanTableOverflow NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The station table has the maximum number of addresses for the LANRANger."
|
|
::= { lanrangerEvents 3 }
|
|
|
|
lanrangerStatusChanged NOTIFICATION-TYPE
|
|
OBJECTS { agnLed }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trap indicates changes in the device status ."
|
|
::= { lanrangerEvents 4 }
|
|
|
|
END
|
|
|