WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/quanta/SWITCHING-EXTENSION-MIB

5601 lines
193 KiB
Plaintext
Raw Permalink Blame History

SWITCHING-EXTENSION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
Integer32, Unsigned32, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
RowStatus,MacAddress,TimeStamp FROM SNMPv2-TC
quanta, switch, AgentPortMask FROM QUANTA-SWITCH-MIB
VlanList FROM SWITCHING-MIB
DisplayString,PhysAddress FROM RFC1213-MIB
VlanIndex,dot1qVlanIndex,dot1qFdbId FROM Q-BRIDGE-MIB
IANAifType FROM IANAifType-MIB
ifIndex,InterfaceIndex,InterfaceIndexOrZero
FROM IF-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
switchingExtension MODULE-IDENTITY
LAST-UPDATED "200803310000Z" -- 31 MAR 2008 12:00:00 GMT
ORGANIZATION "Quanta Computer Inc."
CONTACT-INFO
" Customer Support
Postal: Quanta Computer Inc.
No. 4, Wen Ming 1 St., Kuei Shan Hsiang,
Tao Yuan Shien, Taiwan, R.O.C.
Tel: +886 327 2345
E-Mail: Morpheus.Chang@quantatw.com"
DESCRIPTION
"QCI switching extension MIB"
::= { switch 101 }
--**************************************************************************************
-- agentInfoGroup
--**************************************************************************************
agentInfoGroupExtension OBJECT IDENTIFIER ::= { switchingExtension 1 }
--**************************************************************************************
-- agentInventoryGroupExtension
--
--**************************************************************************************
agentInventoryGroupExtension OBJECT IDENTIFIER ::= { agentInfoGroupExtension 1 }
agentInventroyHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's hardware version. "
::= { agentInventoryGroupExtension 100 }
agentInventoryLoaderVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Switch's loader version "
::= { agentInventoryGroupExtension 102 }
agentInventoryBootRomVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Boot Rom Version. "
::= { agentInventoryGroupExtension 103 }
agentInventoryOpCodeVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Operation Code version."
::= { agentInventoryGroupExtension 104 }
agentInventoryLabelRevNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Label Revision Number."
::= { agentInventoryGroupExtension 105 }
--**************************************************************************************
-- Temperature and FAN1, FAN2 status information Table
--
--**************************************************************************************
agentTemperatureFanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentTemperatureFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's temperature and FANs information table"
::= { agentInventoryGroupExtension 106 }
agentTemperatureFanStatusEntry OBJECT-TYPE
SYNTAX AgentTemperatureFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of temperature and FANs information table"
INDEX { agentTemperatureFanUnitIndex }
::= { agentTemperatureFanStatusTable 1 }
AgentTemperatureFanStatusEntry ::=
SEQUENCE {
agentTemperatureFanUnitIndex Integer32,
agentTemperature DisplayString,
agentTemperature1 DisplayString,
agentTemperature2 DisplayString,
agentTemperature3 DisplayString,
agentTemperature4 DisplayString,
agentTemperature5 DisplayString,
agentFAN1 INTEGER,
agentFAN2 INTEGER,
agentFAN3 INTEGER,
agentFAN4 INTEGER,
agentFANChipType DisplayString
}
agentTemperatureFanUnitIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of temperature and FANs Information entry"
::= { agentTemperatureFanStatusEntry 1 }
agentTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature of the unit"
::= { agentTemperatureFanStatusEntry 2 }
agentTemperature1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature 1 of the unit"
::= { agentTemperatureFanStatusEntry 11 }
agentTemperature2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature 2 of the unit"
::= { agentTemperatureFanStatusEntry 12 }
agentTemperature3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature 3 of the unit"
::= { agentTemperatureFanStatusEntry 13 }
agentTemperature4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature 4 of the unit"
::= { agentTemperatureFanStatusEntry 14 }
agentTemperature5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature 5 of the unit"
::= { agentTemperatureFanStatusEntry 15 }
agentFAN1 OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FAN1 status of the unit"
::= { agentTemperatureFanStatusEntry 21 }
agentFAN2 OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FAN2 status of the unit"
::= { agentTemperatureFanStatusEntry 22 }
agentFAN3 OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FAN3 status of the unit"
::= { agentTemperatureFanStatusEntry 23 }
agentFAN4 OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FAN3 status of the unit"
::= { agentTemperatureFanStatusEntry 24 }
agentFANChipType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"fan chip type of the unit"
::= { agentTemperatureFanStatusEntry 31 }
--**************************************************************************************
-- Power Supply status information Table
--
--**************************************************************************************
agentPowerSupplyStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentPowerSupplyStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's power supplies information table"
::= { agentInventoryGroupExtension 107 }
agentPowerSupplyStatusEntry OBJECT-TYPE
SYNTAX AgentPowerSupplyStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of power supplies information table"
INDEX { agentPowerSupplyUnitIndex }
::= { agentPowerSupplyStatusTable 1 }
AgentPowerSupplyStatusEntry ::=
SEQUENCE {
agentPowerSupplyUnitIndex
Integer32,
agentPowerSupplyStatus
INTEGER,
agentPowerSupplyName
DisplayString,
agentPowerSupplyModel
DisplayString,
agentPowerSupplyRevisionNumber
DisplayString,
agentPowerSupplyManufacturerLocation
DisplayString,
agentPowerSupplyManufacturingDate
DisplayString,
agentPowerSupplySerialNumber
DisplayString,
agentPowerSupplyTemperature1
DisplayString,
agentPowerSupplyTemperature2
DisplayString,
agentPowerSupplyFanSpeed
DisplayString,
agentPowerSupplyFanDuty
Integer32,
agentPowerConsumption
DisplayString
}
agentPowerSupplyUnitIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of power supplies Information entry"
::= { agentPowerSupplyStatusEntry 1 }
agentPowerSupplyStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2),
notpresent(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of the power supply"
::= { agentPowerSupplyStatusEntry 2 }
agentPowerSupplyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"name of the power supply"
::= { agentPowerSupplyStatusEntry 3 }
agentPowerSupplyModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"model of the power supply"
::= { agentPowerSupplyStatusEntry 4 }
agentPowerSupplyRevisionNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"revision number of the power supply"
::= { agentPowerSupplyStatusEntry 5 }
agentPowerSupplyManufacturerLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"manufacturer location of the power supply"
::= { agentPowerSupplyStatusEntry 6 }
agentPowerSupplyManufacturingDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"manufacturing date of the power supply"
::= { agentPowerSupplyStatusEntry 7 }
agentPowerSupplySerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"serial number of the power supply"
::= { agentPowerSupplyStatusEntry 8 }
agentPowerSupplyTemperature1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature 1 of the power supply"
::= { agentPowerSupplyStatusEntry 9 }
agentPowerSupplyTemperature2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature 2 of the power supply"
::= { agentPowerSupplyStatusEntry 10 }
agentPowerSupplyFanSpeed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"fan speed of the power supply"
::= { agentPowerSupplyStatusEntry 11 }
agentPowerSupplyFanDuty OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"fan duty of the power supply"
::= { agentPowerSupplyStatusEntry 12 }
agentPowerConsumption OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"power consumption of the power supply"
::= { agentPowerSupplyStatusEntry 13 }
--/* Add for DOM support by KevinLee 2013/08/13*/
--**************************************************************************************
-- DOM information Table
-- add by JoeLai, 2013-07-18
--**************************************************************************************
agentDOMTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDOMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's dom information table"
::= { agentInventoryGroupExtension 108 }
agentDOMEntry OBJECT-TYPE
SYNTAX AgentDOMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of dom information table"
INDEX { agentDOMtransceiverIndex }
::= { agentDOMTable 1 }
AgentDOMEntry ::=
SEQUENCE {
agentDOMtransceiverIndex
Integer32,
agentDOMTemperature
DisplayString,
agentDOMVoltage
DisplayString,
agentDOMBias
DisplayString,
agentDOMTxpower
DisplayString,
agentDOMRxpower
DisplayString,
agentDOMtemperatureHighAlarm
DisplayString,
agentDOMtemperatureHighWarning
DisplayString,
agentDOMtemperatureLowWarning
DisplayString,
agentDOMtemperatureLowAlarm
DisplayString,
agentDOMvotageHighAlarm
DisplayString,
agentDOMvotageHighWarning
DisplayString,
agentDOMvotageLowWarning
DisplayString,
agentDOMvotageLowAlarm
DisplayString,
agentDOMbiasHighAlarm
DisplayString,
agentDOMbiasHighWarning
DisplayString,
agentDOMbiasLowWarning
DisplayString,
agentDOMbiasLowAlarm
DisplayString,
agentDOMtxpowerHighAlarm
DisplayString,
agentDOMtxpowerHighWarning
DisplayString,
agentDOMtxpowerLowWarning
DisplayString,
agentDOMtxpowerLowAlarm
DisplayString,
agentDOMrxpowerHighAlarm
DisplayString,
agentDOMrxpowerHighWarning
DisplayString,
agentDOMrxpowerLowWarning
DisplayString,
agentDOMrxpowerLowAlarm
DisplayString
}
agentDOMtransceiverIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of dom Information entry"
::= { agentDOMEntry 1 }
agentDOMTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"temperature of the transceiver module"
::= { agentDOMEntry 2 }
agentDOMVoltage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"votage of the transceiver module"
::= { agentDOMEntry 3 }
agentDOMBias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias current of the transceiver module"
::= { agentDOMEntry 4 }
agentDOMTxpower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Power of the transceiver module"
::= { agentDOMEntry 5 }
agentDOMRxpower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Power of the transceiver module"
::= { agentDOMEntry 6 }
agentDOMtemperatureHighAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature high alarm of the transceiver module"
::= { agentDOMEntry 7 }
agentDOMtemperatureHighWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature high warning of the transceiver module"
::= { agentDOMEntry 8 }
agentDOMtemperatureLowWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature low warning of the transceiver module"
::= { agentDOMEntry 9 }
agentDOMtemperatureLowAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature low alarm of the transceiver module"
::= { agentDOMEntry 10 }
agentDOMvotageHighAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Votage high alarm of the transceiver module"
::= { agentDOMEntry 11 }
agentDOMvotageHighWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Votage high warning of the transceiver module"
::= { agentDOMEntry 12 }
agentDOMvotageLowWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Votage low warning of the transceiver module"
::= { agentDOMEntry 13 }
agentDOMvotageLowAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Votage low alarm of the transceiver module"
::= { agentDOMEntry 14 }
agentDOMbiasHighAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias high alarm of the transceiver module"
::= { agentDOMEntry 15 }
agentDOMbiasHighWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias high warning of the transceiver module"
::= { agentDOMEntry 16 }
agentDOMbiasLowWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias low warning of the transceiver module"
::= { agentDOMEntry 17 }
agentDOMbiasLowAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias low alarm of the transceiver module"
::= { agentDOMEntry 18 }
agentDOMtxpowerHighAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Power high alarm of the transceiver module"
::= { agentDOMEntry 19 }
agentDOMtxpowerHighWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Power high warning of the transceiver module"
::= { agentDOMEntry 20 }
agentDOMtxpowerLowWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Power low warning of the transceiver module"
::= { agentDOMEntry 21 }
agentDOMtxpowerLowAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Power low alarm of the transceiver module"
::= { agentDOMEntry 22 }
agentDOMrxpowerHighAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Power high alarm of the transceiver module"
::= { agentDOMEntry 23 }
agentDOMrxpowerHighWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Power high warning of the transceiver module"
::= { agentDOMEntry 24 }
agentDOMrxpowerLowWarning OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Power low warning of the transceiver module"
::= { agentDOMEntry 25 }
agentDOMrxpowerLowAlarm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Power low alarm of the transceiver module"
::= { agentDOMEntry 26 }
--/* Add by KevinLee 2014/04/17*/ /* Add SNMP for DOM */
--**************************************************************************************
-- DOM Group
--
--**************************************************************************************
agentDOMGroup OBJECT IDENTIFIER ::= { switchingExtension 100 }
agentDOMAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the DOM feature. The default mode is disabled."
DEFVAL { disable }
::= { agentDOMGroup 1 }
agentDOMInterval OBJECT-TYPE
SYNTAX INTEGER (300..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the interval of Digital Optical Monitor."
DEFVAL { 600 }
::= { agentDOMGroup 2 }
--**************************************************************************************
-- agent10GInfoGroupExtension
--
--**************************************************************************************
agent10GModuleInfoGroupExtension OBJECT IDENTIFIER ::= { agentInfoGroupExtension 2 }
--**************************************************************************************
-- 10G modules information Table
--
--**************************************************************************************
agent10GModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Agent10GModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's 10G module information table"
::= { agent10GModuleInfoGroupExtension 107 }
agent10GModuleEntry OBJECT-TYPE
SYNTAX Agent10GModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of 10G module information table"
INDEX { agent10GModuleUnitIndex, agent10GModuleSlotIndex, agent10GModulePortIndex }
::= { agent10GModuleTable 1 }
Agent10GModuleEntry ::=
SEQUENCE {
agent10GModuleUnitIndex Integer32,
agent10GModuleSlotIndex Integer32,
agent10GModulePortIndex Integer32,
agent10GModuleIndex Integer32,
agent10GModuleInterfaceNumber Integer32,
agent10GModuleType DisplayString,
agent10GModuleComplianceCode DisplayString,
agent10GModuleVendorName DisplayString,
agent10GModulePartNumber DisplayString,
agent10GModuleSerialNumber DisplayString,
agent10GModuleRevisionNumber DisplayString,
agent10GModuleManufacturingDate DisplayString
}
agent10GModuleUnitIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit number associated with this unit."
::= { agent10GModuleEntry 1 }
agent10GModuleSlotIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique slot index in 10G module entry."
::= { agent10GModuleEntry 2 }
agent10GModulePortIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique port index of the slot in 10G module entry."
::= { agent10GModuleEntry 3 }
agent10GModuleIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of 10G module entry."
::= { agent10GModuleEntry 4 }
agent10GModuleInterfaceNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface number of the corresponding 10G module index entry."
::= { agent10GModuleEntry 5 }
agent10GModuleType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G module's types. It could be CX4 or SFP Plus."
::= { agent10GModuleEntry 6 }
agent10GModuleComplianceCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G module's Compliance codes"
::= { agent10GModuleEntry 7 }
agent10GModuleVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G module's vendor name."
::= { agent10GModuleEntry 8 }
agent10GModulePartNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G module's part number."
::= { agent10GModuleEntry 9 }
agent10GModuleSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G module's serial number."
::= { agent10GModuleEntry 10 }
agent10GModuleRevisionNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G module's revision number."
::= { agent10GModuleEntry 11 }
agent10GModuleManufacturingDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10G module's Manufacturing date."
::= { agent10GModuleEntry 12 }
--**************************************************************************************
-- GBIC information Table
--
--**************************************************************************************
agentGBICInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentGBICInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's GBIC information table"
::= { agentInfoGroupExtension 3 }
agentGBICInfoEntry OBJECT-TYPE
SYNTAX AgentGBICInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of GBIC information table"
INDEX { agentGBICInfoIndex }
::= { agentGBICInfoTable 1 }
AgentGBICInfoEntry ::=
SEQUENCE {
agentGBICInfoIndex Integer32,
agentGBICInfoInterfaceNumber Integer32,
agentGBICInfoComplianceCode DisplayString,
agentGBICInfoVendorName DisplayString,
agentGBICInfoPartNumber DisplayString,
agentGBICInfoSerialNumber DisplayString,
agentGBICInfoRevisionNumber DisplayString,
agentGBICInfoManufacturingDate DisplayString
}
agentGBICInfoIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of GBIC Information entry"
::= { agentGBICInfoEntry 1 }
agentGBICInfoInterfaceNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"interface number of the corresponding GBIC index entry"
::= { agentGBICInfoEntry 2 }
agentGBICInfoComplianceCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gigabit Ethernet Compliance codes"
::= { agentGBICInfoEntry 3 }
agentGBICInfoVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GBIC vendor name"
::= { agentGBICInfoEntry 4 }
agentGBICInfoPartNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GBIC part number"
::= { agentGBICInfoEntry 5 }
agentGBICInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GBIC serial number"
::= { agentGBICInfoEntry 6 }
agentGBICInfoRevisionNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GBIC revision number"
::= { agentGBICInfoEntry 7 }
agentGBICInfoManufacturingDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GBIC manufacturing date"
::= { agentGBICInfoEntry 8 }
--**************************************************************************************
-- agentConfigGroupExtension
--**************************************************************************************
agentConfigGroupExtension OBJECT IDENTIFIER ::= { switchingExtension 2 }
--**************************************************************************************
-- agentCLIConfigGroupExtension
--
--**************************************************************************************
agentCLIConfigGroupExtension OBJECT IDENTIFIER ::= { agentConfigGroupExtension 1 }
agentSerialGroupExtension OBJECT IDENTIFIER ::= { agentCLIConfigGroupExtension 5 }
agentSerialPasswdCnt OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's serial port password count threshold. "
DEFVAL {3}
::= { agentSerialGroupExtension 100 }
agentSerialPasswdCntSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch's serial port password count threshold to the default value. "
DEFVAL {disable}
::= { agentSerialGroupExtension 101 }
agentSerialSilentTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a user fail to login into the console for agentSerialPasswdCnt times, the user cannot login again for a period of agentSerialSilentTime seconds "
DEFVAL {0}
::= { agentSerialGroupExtension 102 }
agentSerialSilentTimeSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch's serial port silent time to the default value. "
DEFVAL {disable}
::= { agentSerialGroupExtension 103 }
agentVtyGroupExtension OBJECT IDENTIFIER ::= { agentCLIConfigGroupExtension 6 }
agentVtyTelnetServerAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's telnet server admin mode."
::= { agentVtyGroupExtension 103 }
agentVtyPasswdCnt OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's password count threshold for telnet and SSH connections. System will reject
telnet or SSH connections if users fail the password authentication for agentVtyPasswdCnt times "
DEFVAL {3}
::= { agentVtyGroupExtension 104 }
agentVtyPasswdCntSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch's password count threshold to the default value for telnet and SSH connections. "
DEFVAL {disable}
::= { agentVtyGroupExtension 105 }
agentVtyTerminalLength OBJECT-TYPE
SYNTAX Integer32 (10..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's terminal length for telnet connections."
DEFVAL { 24 }
::= { agentVtyGroupExtension 106 }
agentVtyTerminalLengthSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch's terminal length to the default value for telnet connections."
DEFVAL { disable }
::= { agentVtyGroupExtension 107 }
--**************************************************************************************
-- agentNetworkConfigGroupExtension
--
--**************************************************************************************
agentNetworkConfigGroupExtension OBJECT IDENTIFIER ::= { agentConfigGroupExtension 3 }
agentNetworkHttpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's HTTP port number. "
::= { agentNetworkConfigGroupExtension 100 }
agentNetworkDhcpClientIfClientIdFormat OBJECT-TYPE
SYNTAX INTEGER {
hexformat(1),
textformat(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch's client ID agentNetworkDhcpClientIfClientId format. It could be HEX(00:00:00:00:00:00) or TEXT( which length is less or equal to 32) "
DEFVAL { hexformat }
::= { agentNetworkConfigGroupExtension 101 }
agentNetworkDhcpClientIfClientId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the switch's Client ID. The client ID is used in asking for an IP address from the DHCP server. It could be HEX(00:00:00:00:00:00) or TEXT( which length is less or equal to 32) "
::= { agentNetworkConfigGroupExtension 102 }
agentNetworkDhcpSetToInventoryClientIfClientId OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enable, set switch's Client ID to the inventory's default value "
DEFVAL { disable }
::= { agentNetworkConfigGroupExtension 103 }
agentNetworkDhcpRestart OBJECT-TYPE
SYNTAX INTEGER {
restart(1),
noRestart(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"If restart, release current IP address and Re-get the switch's IP address from the DHCP/BOOTP server "
::= { agentNetworkConfigGroupExtension 104 }
--**************************************************************************************
-- agentSwitchConfigExtensionGroup
--
--**************************************************************************************
agentSwitchConfigGroupExtension OBJECT IDENTIFIER ::= { agentConfigGroupExtension 8 }
--**************************************************************************************
-- agentIPFilterConfigGroupExtension
--
--**************************************************************************************
agentIPFilterConfigGroupExtension OBJECT IDENTIFIER ::= { agentSwitchConfigGroupExtension 10 }
agentIPFilterConfigAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable/disable IP filter function of the switch. "
DEFVAL {disable}
::= { agentIPFilterConfigGroupExtension 10 }
agentIpFilterConfigCreate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creates a new IpFilter entry with name and ip mask or ipv6/prefix length.
Max length of ip filter name is 64.
Ipv4 Example:
IpFilterName 1.1.1.1 255.255.255.0
Ipv6 Example:
IpFilterName2 1111::1/64
"
::= { agentIPFilterConfigGroupExtension 11 }
agentIpFilterConfigDelete OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete a IpFilter entry by name."
::= { agentIPFilterConfigGroupExtension 12 }
--**************************************************************************************
-- Ip Filter Table
--
--**************************************************************************************
agentIpFilterConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpFilterConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's IP filter table"
::= { agentIPFilterConfigGroupExtension 30 }
agentIpFilterConfigEntry OBJECT-TYPE
SYNTAX AgentIpFilterConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of IP filter table"
INDEX { agentIpFilterConfigIndex }
::= { agentIpFilterConfigTable 1 }
AgentIpFilterConfigEntry ::=
SEQUENCE {
agentIpFilterConfigIndex Integer32,
agentIpFilterConfigName DisplayString,
agentIpFilterConfigIP InetAddress,
agentIpFilterConfigMask InetAddress
}
agentIpFilterConfigIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of IP Filter entry"
::= { agentIpFilterConfigEntry 1 }
agentIpFilterConfigIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the IPv4/IPv6 address which are allowed to connect to DUT
IP should be changed with mask."
::= { agentIpFilterConfigEntry 2 }
agentIpFilterConfigMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the IPv4/IPv6 mask for defining an IPv4/IPv6 range.
IP should be changed with mask."
::= { agentIpFilterConfigEntry 3 }
agentIpFilterConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of IpFilter entry."
::= { agentIpFilterConfigEntry 4 }
--**************************************************************************************
-- QCI Switch Static MacFiltering Table
--**************************************************************************************
--agentSwitchStaticMacFilteringExtensionTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentSwitchStaticMacFilteringExtensionEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The switch's static Mac filtering table"
-- ::= { agentSwitchConfigGroupExtension 15 }
-- agentSwitchStaticMacFilteringExtensionEntry OBJECT-TYPE
-- SYNTAX AgentSwitchStaticMacFilteringExtensionEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Per-port ingress/egress filter configuration based on VLAN Id and MAC address."
-- INDEX { agentSwitchStaticMacFilteringExtensionVlanId, agentSwitchStaticMacFilteringExtensionAddress }
-- ::= { agentSwitchStaticMacFilteringExtensionTable 1 }
-- AgentSwitchStaticMacFilteringExtensionEntry ::=
-- SEQUENCE {
-- agentSwitchStaticMacFilteringExtensionVlanId
-- Integer32,
-- agentSwitchStaticMacFilteringExtensionAddress
-- MacAddress,
-- agentSwitchStaticMacFilteringExtensionSourcePort
-- Integer32,
-- agentSwitchStaticMacFilteringExtensionStatus
-- INTEGER
-- }
-- agentSwitchStaticMacFilteringExtensionVlanId OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The Static MAC Filter Vlan Id"
-- ::= { agentSwitchStaticMacFilteringExtensionEntry 1 }
-- agentSwitchStaticMacFilteringExtensionAddress OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The Static MAC Filter MAC address"
-- ::= { agentSwitchStaticMacFilteringExtensionEntry 2 }
-- agentSwitchStaticMacFilteringExtensionSourcePort OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The Static MAC Filter source port."
-- ::= { agentSwitchStaticMacFilteringExtensionEntry 3 }
-- agentSwitchStaticMacFilteringExtensionStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- valid(1),
-- invalid(4)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The Static MAC Filter status.
-- Supported values:
-- valid(1) - the entry is valid
-- invalid(4) - removes the entry"
-- ::= { agentSwitchStaticMacFilteringExtensionEntry 5 }
--**************************************************************************************
-- agentTransferConfigGroupExtension
--
--**************************************************************************************
agentTransferConfigGroupExtension OBJECT IDENTIFIER ::= { agentConfigGroupExtension 9 }
--**************************************************************************************
-- agentTransferCopyGroup
--
--**************************************************************************************
agentTransferCopyGroup OBJECT IDENTIFIER ::= { agentTransferConfigGroupExtension 3 }
agentTransferCopyRunningConfigToSwitchDestFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filename used to store current running config in the switch.
It can be up to 30 alphanumeric characters."
::= { agentTransferCopyGroup 1 }
agentTransferCopyRunningConfigStart OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Copy running configure to switch, the filename is specified in
agentTransferCopyRunningConfigToSwitchDestFilename."
::= { agentTransferCopyGroup 2 }
agentTransferCopyRunningConfigStatus OBJECT-TYPE
SYNTAX INTEGER {
success(0),
failure(1),
wrongFileType(4),
noPartitionTableEntry(15),
runByOtherUsers(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of a copy running configure operation."
::= { agentTransferCopyGroup 3 }
--**************************************************************************************
-- agentTransferDeleteGroup
--
--**************************************************************************************
agentTransferDeleteGroup OBJECT IDENTIFIER ::= { agentTransferConfigGroupExtension 4 }
agentTransferDeleteSwitchFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filename of the file to be deleted from the switch.
It can be up to 32 alphanumeric characters."
::= { agentTransferDeleteGroup 1 }
agentTransferDeleteStart OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"start deleting file; the filename is specified in
agentTransferDeleteSwitchFilename."
::= { agentTransferDeleteGroup 2 }
agentTransferDeleteStatus OBJECT-TYPE
SYNTAX INTEGER {
success(0),
failure(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of the deleting operation."
::= { agentTransferDeleteGroup 3 }
--**************************************************************************************
-- Storm Control Table
--
--**************************************************************************************
agentStormContorlConfigGroupExtension OBJECT IDENTIFIER ::= { agentSwitchConfigGroupExtension 18 }
agentSwitchBroadcastControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch config broadcast allows you to enable or disable
broadcast storm recovery mode. When you specify Enable for Broadcast
Storm Recovery and the broadcast traffic on any Ethernet port exceeds
20 percent of the link speed, the switch blocks (discards) the broadcast
traffic until the broadcast traffic returns to 10 percent or less.
Upper limit for 10M link is 20% and lower limit is 10%.
For 100M link Upper limit is 5% and lower limit is 2%"
DEFVAL { disable }
::= { agentStormContorlConfigGroupExtension 1 }
agentSwitchMulticastControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch config multicast allows you to enable or disable
multicast storm recovery mode. When you specify Enable for Multicast
Storm Recovery and the multicast traffic on any Ethernet port exceeds
20 percent of the link speed, the switch blocks (discards) the multicast
traffic until the multicast traffic returns to 10 percent or less.
Upper limit for 10M link is 20% and lower limit is 10%.
For 100M link Upper limit is 5% and lower limit is 2%"
DEFVAL { disable }
::= { agentStormContorlConfigGroupExtension 2 }
agentSwitchUnicastControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch config unicast allows you to enable or disable
unicast storm recovery mode. When you specify Enable for unicast
Storm Recovery and the unicast traffic on any Ethernet port exceeds
20 percent of the link speed, the switch blocks (discards) the unicast
traffic until the unicast traffic returns to 10 percent or less.
Upper limit for 10M link is 20% and lower limit is 10%.
For 100M link Upper limit is 5% and lower limit is 2%"
DEFVAL { disable }
::= { agentStormContorlConfigGroupExtension 3 }
agentSwitchDot3FlowControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config switchconfig flowcontrol allows you to enable or disable
802.3x flow control for the switch. This value
applies to only full-duplex mode ports. "
DEFVAL { disable }
::= { agentStormContorlConfigGroupExtension 4 }
--**************************************************************************************
-- Broadcast Table
--
--**************************************************************************************
agentSwitchStormControlBroadcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchStormControlBroadcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's storm control table"
::= { agentStormContorlConfigGroupExtension 10 }
agentSwitchStormControlBroadcastEntry OBJECT-TYPE
SYNTAX AgentSwitchStormControlBroadcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"storm control for a specific port."
INDEX { agentSwitchBcastStormIfIndex }
::= { agentSwitchStormControlBroadcastTable 1 }
AgentSwitchStormControlBroadcastEntry ::=
SEQUENCE {
agentSwitchBcastStormIfIndex Integer32,
agentSwitchBcastStormExtensionPktRate Unsigned32,
agentSwitchBcastStormExtensionAdminMode INTEGER
}
agentSwitchBcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of switch broadcast storm entry"
::= { agentSwitchStormControlBroadcastEntry 1 }
agentSwitchBcastStormExtensionPktRate OBJECT-TYPE
SYNTAX Unsigned32 (1..14880000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Pkt rate, range is from 1 to 14880000."
DEFVAL { 4160 }
::= { agentSwitchStormControlBroadcastEntry 2 }
agentSwitchBcastStormExtensionAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable/disable broadcast storm control"
::= { agentSwitchStormControlBroadcastEntry 3 }
--**************************************************************************************
-- Multicast Table
--
--**************************************************************************************
agentSwitchStormControlMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchStormControlMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's storm control table"
::= { agentStormContorlConfigGroupExtension 20 }
agentSwitchStormControlMulticastEntry OBJECT-TYPE
SYNTAX AgentSwitchStormControlMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"storm control for a specific port."
INDEX { agentSwitchMcastStormIfIndex }
::= { agentSwitchStormControlMulticastTable 1 }
AgentSwitchStormControlMulticastEntry ::=
SEQUENCE {
agentSwitchMcastStormIfIndex Integer32,
agentSwitchMcastStormExtensionPktRate Unsigned32,
agentSwitchMcastStormExtensionAdminMode INTEGER
}
agentSwitchMcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of switch Multicast storm entry"
::= { agentSwitchStormControlMulticastEntry 1 }
agentSwitchMcastStormExtensionPktRate OBJECT-TYPE
SYNTAX Unsigned32 (1..14880000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Pkt rate, range is from 1 to 14880000."
DEFVAL { 4160 }
::= { agentSwitchStormControlMulticastEntry 2 }
agentSwitchMcastStormExtensionAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable/disable Multicast storm control"
::= { agentSwitchStormControlMulticastEntry 3 }
--**************************************************************************************
-- Unicast Table
--
--**************************************************************************************
agentSwitchStormControlUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchStormControlUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's storm control table"
::= { agentStormContorlConfigGroupExtension 30 }
agentSwitchStormControlUnicastEntry OBJECT-TYPE
SYNTAX AgentSwitchStormControlUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"storm control for a specific port."
INDEX { agentSwitchUcastStormIfIndex }
::= { agentSwitchStormControlUnicastTable 1 }
AgentSwitchStormControlUnicastEntry ::=
SEQUENCE {
agentSwitchUcastStormIfIndex Integer32,
agentSwitchUcastStormExtensionPktRate Unsigned32,
agentSwitchUcastStormExtensionAdminMode INTEGER
}
agentSwitchUcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of switch Unicast storm entry"
::= { agentSwitchStormControlUnicastEntry 1 }
agentSwitchUcastStormExtensionPktRate OBJECT-TYPE
SYNTAX Unsigned32 (1..14880000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Pkt rate, range is from 1 to 14880000."
DEFVAL { 4160 }
::= { agentSwitchStormControlUnicastEntry 2 }
agentSwitchUcastStormExtensionAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable/disable ingress rate limit"
::= { agentSwitchStormControlUnicastEntry 3 }
--**************************************************************************************
-- FlowControl Table
--
--**************************************************************************************
agentSwitchFlowControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchFlowControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's storm control table"
::= { agentStormContorlConfigGroupExtension 40 }
agentSwitchFlowControlEntry OBJECT-TYPE
SYNTAX AgentSwitchFlowControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"storm control for a specific port."
INDEX { agentSwitchFlowControlIfIndex }
::= { agentSwitchFlowControlTable 1 }
AgentSwitchFlowControlEntry ::=
SEQUENCE {
agentSwitchFlowControlIfIndex Integer32,
agentSwitchFlowControlAdminMode INTEGER
}
agentSwitchFlowControlIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of switch FlowControl storm entry"
::= { agentSwitchFlowControlEntry 1 }
agentSwitchFlowControlAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable/disable FlowControl storm control"
::= { agentSwitchFlowControlEntry 2 }
--**************************************************************************************
-- StormControlAction Table
--
--**************************************************************************************
agentSwitchStormControlActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchStormControlActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's storm control table"
::= { agentStormContorlConfigGroupExtension 50 }
agentSwitchStormControlActionEntry OBJECT-TYPE
SYNTAX AgentSwitchStormControlActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"storm control for a specific port."
INDEX { agentSwitchStormControlActionIfIndex }
::= { agentSwitchStormControlActionTable 1 }
AgentSwitchStormControlActionEntry ::=
SEQUENCE {
agentSwitchStormControlActionIfIndex Integer32,
agentSwitchStormControlActionShutdownMode INTEGER,
agentSwitchStormControlActionTrapMode INTEGER
}
agentSwitchStormControlActionIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of switch StormControlAction storm entry"
::= { agentSwitchStormControlActionEntry 1 }
agentSwitchStormControlActionShutdownMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shutdown this interface if a storm occurs."
::= { agentSwitchStormControlActionEntry 2 }
agentSwitchStormControlActionTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send SNMP trap if a storm occurs."
::= { agentSwitchStormControlActionEntry 3 }
--**************************************************************************************
-- errRecovery Table
--
--**************************************************************************************
agentErrRecoveryConfigGroupExtension OBJECT IDENTIFIER ::= { agentSwitchConfigGroupExtension 28 }
agentErrRecoveryInterval OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Recovery Timer Interval."
DEFVAL {300}
::= { agentErrRecoveryConfigGroupExtension 1 }
agentErrRecoveryStormCtrlCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable timer to recover from storm-control error disable state."
DEFVAL { disable }
::= { agentErrRecoveryConfigGroupExtension 2 }
agentErrRecoveryUdldCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable timer to recover from udld error disable state."
DEFVAL { disable }
::= { agentErrRecoveryConfigGroupExtension 3 }
agentErrRecoveryPortSecurityCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable timer to recover from port-security error disable state."
DEFVAL { disable }
::= { agentErrRecoveryConfigGroupExtension 4 }
agentErrRecoveryBpduCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable timer to recover from bpdu error disable state."
DEFVAL { disable }
::= { agentErrRecoveryConfigGroupExtension 5 }
agentErrRecoveryLinkFlapCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable timer to recover from link flap error disable state."
DEFVAL { disable }
::= { agentErrRecoveryConfigGroupExtension 6 }
agentErrRecoveryMacFlapCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable timer to recover from MAC flap error disable state."
DEFVAL { enable }
::= { agentErrRecoveryConfigGroupExtension 7 }
agentErrDetectLinkFlapCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable error disable detection for link flapping state."
DEFVAL { enable }
::= { agentErrRecoveryConfigGroupExtension 8 }
agentErrDetectMacFlapCauseMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable error disable detection for MAC flapping state."
DEFVAL { enable }
::= { agentErrRecoveryConfigGroupExtension 9 }
--**************************************************************************************
-- Storm Control Table
--
--**************************************************************************************
-- agentSwitchBroadcastControlMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The switch config broadcast allows you to enable or disable
-- broadcast storm recovery mode. When you specify Enable for Broadcast
-- Storm Recovery and the broadcast traffic on any Ethernet port exceeds
-- 20 percent of the link speed, the switch blocks (discards) the broadcast
-- traffic until the broadcast traffic returns to 10 percent or less.
-- Upper limit for 10M link is 20% and lower limit is 10%.
-- For 100M link Upper limit is 5% and lower limit is 2%"
-- DEFVAL { disable }
-- ::= { agentSwitchConfigGroupExtension 18 }
-- agentSwitchDot3FlowControlMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Config switchconfig flowcontrol allows you to enable or disable
-- 802.3x flow control for the switch. This value
-- applies to only full-duplex mode ports. "
-- DEFVAL { disable }
-- ::= { agentSwitchConfigGroupExtension 19 }
-- agentSwitchStormControlExtensionTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentSwitchStormControlExtensionEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The switch's storm control table"
-- ::= { agentSwitchConfigGroupExtension 20 }
-- agentSwitchStormControlExtensionEntry OBJECT-TYPE
-- SYNTAX AgentSwitchStormControlExtensionEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "storm control for a specific port."
-- INDEX { agentSwitchStormControlExtensionIfIndex }
-- ::= { agentSwitchStormControlExtensionTable 1 }
-- AgentSwitchStormControlExtensionEntry ::=
-- SEQUENCE {
-- agentSwitchStormControlExtensionIfIndex Integer32,
-- agentSwitchBcastStormExtensionPktRate INTEGER,
-- agentSwitchBcastStormExtensionAdminMode INTEGER,
-- agentSwitchMcastStormExtensionPktRate INTEGER,
-- agentSwitchMcastStormExtensionAdminMode INTEGER,
-- agentSwitchUcastStormExtensionPktRate INTEGER,
-- agentSwitchUcastStormExtensionAdminMode INTEGER,
-- agentSwitchFlowControlAdminMode INTEGER
-- }
-- agentSwitchStormControlExtensionIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Unique index of switch broadcast storm entry"
-- ::= { agentSwitchStormControlExtensionEntry 1 }
-- agentSwitchBcastStormExtensionPktRate OBJECT-TYPE
-- SYNTAX INTEGER {
-- level1(1),
-- level2(2),
-- level3(3),
-- level4(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "set the packet rate thresholds for broadcast storm control. Note that
-- level1 represents 64 PPS for 10M/100M/1G interfaces, and 1042 PPS for 10G interfaces;
-- level2 represents 128 PPS for 10M/100M/1G interfaces, and 2084 PPS for 10G interfaces;
-- level3 represents 256 PPS for 10M/100M/1G interfaces, and 3124 PPS for 10G interfaces;
-- level4 represents 512 PPS for 10M/100M/1G interfaces, and 4167 PPS for 10G interfaces."
-- ::= { agentSwitchStormControlExtensionEntry 2 }
-- agentSwitchBcastStormExtensionAdminMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "enable/disable broadcast storm control"
-- ::= { agentSwitchStormControlExtensionEntry 3 }
-- agentSwitchMcastStormExtensionPktRate OBJECT-TYPE
-- SYNTAX INTEGER {
-- level1(1),
-- level2(2),
-- level3(3),
-- level4(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "set the packet rate thresholds for multicast storm control. Note that
-- level1 represents 64 PPS for 10M/100M/1G interfaces, and 1042 PPS for 10G interfaces;
-- level2 represents 128 PPS for 10M/100M/1G interfaces, and 2084 PPS for 10G interfaces;
-- level3 represents 256 PPS for 10M/100M/1G interfaces, and 3124 PPS for 10G interfaces;
-- level4 represents 512 PPS for 10M/100M/1G interfaces, and 4167 PPS for 10G interfaces."
-- ::= { agentSwitchStormControlExtensionEntry 4 }
-- agentSwitchMcastStormExtensionAdminMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "enable/disable Multicast storm control"
-- ::= { agentSwitchStormControlExtensionEntry 5 }
-- agentSwitchUcastStormExtensionPktRate OBJECT-TYPE
-- SYNTAX INTEGER {
-- level1(1),
-- level2(2),
-- level3(3),
-- level4(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "set the packet rate thresholds for unicast storm control. Note that
-- level1 represents 64 PPS for 10M/100M/1G interfaces, and 1042 PPS for 10G interfaces;
-- level2 represents 128 PPS for 10M/100M/1G interfaces, and 2084 PPS for 10G interfaces;
-- level3 represents 256 PPS for 10M/100M/1G interfaces, and 3124 PPS for 10G interfaces;
-- level4 represents 512 PPS for 10M/100M/1G interfaces, and 4167 PPS for 10G interfaces."
-- ::= { agentSwitchStormControlExtensionEntry 6 }
-- agentSwitchUcastStormExtensionAdminMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "enable/disable ingress rate limit"
-- ::= { agentSwitchStormControlExtensionEntry 7 }
-- agentSwitchFlowControlAdminMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "enable/disable flow control"
-- ::= { agentSwitchStormControlExtensionEntry 8 }
-- agentSwitchMulticastControlMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The switch config multicast allows you to enable or disable
-- multicast storm recovery mode. When you specify Enable for Multicast
-- Storm Recovery and the multicast traffic on any Ethernet port exceeds
-- 20 percent of the link speed, the switch blocks (discards) the multicast
-- traffic until the multicast traffic returns to 10 percent or less.
-- Upper limit for 10M link is 20% and lower limit is 10%.
-- For 100M link Upper limit is 5% and lower limit is 2%"
-- DEFVAL { disable }
-- ::= { agentSwitchConfigGroupExtension 21 }
-- agentSwitchUnicastControlMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The switch config unicast allows you to enable or disable
-- unicast storm recovery mode. When you specify Enable for unicast
-- Storm Recovery and the unicast traffic on any Ethernet port exceeds
-- 20 percent of the link speed, the switch blocks (discards) the unicast
-- traffic until the unicast traffic returns to 10 percent or less.
-- Upper limit for 10M link is 20% and lower limit is 10%.
-- For 100M link Upper limit is 5% and lower limit is 2%"
-- DEFVAL { disable }
-- ::= { agentSwitchConfigGroupExtension 22 }
--**************************************************************************************
-- Rate Limit Table
--
--**************************************************************************************
--agentSwitchRateLimitTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentSwitchRateLimitEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The switch's Rate Limit table"
-- ::= { agentSwitchConfigGroupExtension 22 }
-- agentSwitchRateLimitEntry OBJECT-TYPE
-- SYNTAX AgentSwitchRateLimitEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Rate Limit for a specific port."
-- INDEX { agentSwitchRateLimitIfIndex }
-- ::= { agentSwitchRateLimitTable 1 }
-- AgentSwitchRateLimitEntry ::=
-- SEQUENCE {
-- agentSwitchRateLimitIfIndex Integer32,
-- agentSwitchRateLimitPktRate Integer32,
-- agentSwitchRateLimitAdminMode INTEGER
-- }
-- agentSwitchRateLimitIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Unique index of rate limit entry"
-- ::= { agentSwitchRateLimitEntry 1 }
-- agentSwitchRateLimitPktRate OBJECT-TYPE
-- SYNTAX Integer32(1..1000)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "set the percentage thresholds for Rate Limit"
-- ::= { agentSwitchRateLimitEntry 2 }
-- agentSwitchRateLimitAdminMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "set the admin mode for Rate Limit"
-- ::= { agentSwitchRateLimitEntry 4 }
--**************************************************************************************
-- agentPortConfigExtensionTable
--
--**************************************************************************************
agentPortConfigExtensionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentPortConfigExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's port capability table"
::= { agentConfigGroupExtension 13 }
agentPortConfigExtensionEntry OBJECT-TYPE
SYNTAX AgentPortConfigExtensionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port capability setting for a specific port."
INDEX { agentPortConfigExtensionIfIndex }
::= { agentPortConfigExtensionTable 1 }
AgentPortConfigExtensionEntry ::=
SEQUENCE {
agentPortConfigExtensionIfIndex Integer32,
agentPortConfigExtensionAdminMode INTEGER,
agentPortConfigExtensionLinkTrapMode INTEGER,
agentPortConfigExtensionClearStats INTEGER,
agentPortConfigExtensionMaxFrameSizeLimit Integer32,
agentPortConfigExtensionMaxFrameSize Integer32
}
agentPortConfigExtensionIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port index used to uniquelly identify an entry of the port capability Table"
::= { agentPortConfigExtensionEntry 1 }
agentPortConfigExtensionAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's Port Admin Mode"
::= { agentPortConfigExtensionEntry 6 }
agentPortConfigExtensionLinkTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, link up and link down traps will be sent for this port."
::= { agentPortConfigExtensionEntry 9 }
agentPortConfigExtensionClearStats OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear stats for this port only"
::= { agentPortConfigExtensionEntry 10 }
agentPortConfigExtensionMaxFrameSizeLimit OBJECT-TYPE
SYNTAX Integer32 (1518..12288)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the largest value that can be
configured for agentPortConfigExtensionMaxFrameSize"
::= { agentPortConfigExtensionEntry 18 }
agentPortConfigExtensionMaxFrameSize OBJECT-TYPE
SYNTAX Integer32 (1518..12288)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the currently configured maximum frame size
value for this port. The maximmum value that this object can be set
to is the value of agentPortConfigExtensionMaxFrameSizeLimit. For Ethernet ports
which support 802.1Q vlan tagging, the minimum value that this object
can be set to is 1522"
::= { agentPortConfigExtensionEntry 19 }
--**************************************************************************************
-- agentClassOfServiceGroupExtension
--
--**************************************************************************************
--agentClassOfServiceGroupExtension OBJECT IDENTIFIER ::= { agentConfigGroupExtension 17 }
--agentQueueBandwidthTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentQueueBandwidthEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The switch port's queue bandwidth"
-- ::= { agentClassOfServiceGroupExtension 100 }
-- agentQueueBandwidthEntry OBJECT-TYPE
-- SYNTAX AgentQueueBandwidthEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "queue bandwidth setting for a specific port."
-- INDEX { agentQueueBandwidthIfIndex }
-- ::= { agentQueueBandwidthTable 1 }
-- AgentQueueBandwidthEntry ::=
-- SEQUENCE {
-- agentQueueBandwidthIfIndex Integer32,
-- agentQueueBandwidthQueue1 Integer32,
-- agentQueueBandwidthQueue2 Integer32,
-- agentQueueBandwidthQueue3 Integer32,
-- agentQueueBandwidthQueue4 Integer32,
-- agentQueueBandwidthResetWeight INTEGER
-- }
-- agentQueueBandwidthIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "port index used to uniquelly identify an entry of the queue bandwidth Table"
-- ::= { agentQueueBandwidthEntry 1 }
-- agentQueueBandwidthQueue1 OBJECT-TYPE
-- SYNTAX Integer32 (1..8)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "bandwidth priority for queue 1. "
-- ::= { agentQueueBandwidthEntry 2 }
-- agentQueueBandwidthQueue2 OBJECT-TYPE
-- SYNTAX Integer32 (1..8)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "bandwidth priority for queue 2. "
-- ::= { agentQueueBandwidthEntry 3 }
-- agentQueueBandwidthQueue3 OBJECT-TYPE
-- SYNTAX Integer32 (1..8)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "bandwidth priority for queue 3. "
-- ::= { agentQueueBandwidthEntry 4 }
-- agentQueueBandwidthQueue4 OBJECT-TYPE
-- SYNTAX Integer32 (1..8)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "bandwidth priority for queue 4. "
-- ::= { agentQueueBandwidthEntry 5 }
-- agentQueueBandwidthResetWeight OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable to reset this interface's queue bandwidth weight to the default value"
-- ::= { agentQueueBandwidthEntry 6 }
--**************************************************************************************
-- agentSwitchConfigGroupExtension
--
--**************************************************************************************
-- agentSwitchIGMPSnoopingGroupExtension OBJECT IDENTIFIER ::= { agentSwitchConfigGroupExtension 6 }
agentSwitchSnoopingGroupExtension OBJECT IDENTIFIER ::= { agentSwitchConfigGroupExtension 6 }
-- agentSwitchIGMPSnoopingQuerierAdminMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "enable/disable administration of IGMP querier. Please enable agentSwitchIGMPSnoopingAdminMode
-- before setting agentSwitchIGMPSnoopingQuerierAdminMode to enable "
-- DEFVAL { disable }
-- ::= { agentSwitchIGMPSnoopingGroupExtension 101 }
-- *****************************************************************
-- RouterCurrentTable
--
-- *****************************************************************
-- agentIgmpSnoopRouterCurrentTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentIgmpSnoopRouterCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for current router ports."
-- ::= { agentSwitchIGMPSnoopingGroupExtension 105 }
--
--
-- agentIgmpSnoopRouterCurrentEntry OBJECT-TYPE
-- SYNTAX AgentIgmpSnoopRouterCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry for current router ports."
-- INDEX { agentIgmpSnoopRouterCurrentVlanIndex }
-- ::= { agentIgmpSnoopRouterCurrentTable 1 }
--
--
-- AgentIgmpSnoopRouterCurrentEntry ::= SEQUENCE {
-- agentIgmpSnoopRouterCurrentVlanIndex Unsigned32,
-- agentIgmpSnoopRouterCurrentPorts OCTET STRING (SIZE(0..255)),
-- agentIgmpSnoopRouterCurrentStatus OCTET STRING (SIZE(0..255))
-- }
--
-- agentIgmpSnoopRouterCurrentVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB."
-- ::= { agentIgmpSnoopRouterCurrentEntry 1 }
--
-- agentIgmpSnoopRouterCurrentPorts OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE(0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are current router ports.
-- Within this list, some router ports are static router ports.
-- Please refer to igmpSnoopRouterStaticTable."
-- ::= { agentIgmpSnoopRouterCurrentEntry 2 }
--
-- agentIgmpSnoopRouterCurrentStatus OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE(0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are static router ports."
-- ::= { agentIgmpSnoopRouterCurrentEntry 3 }
-- *****************************************************************
-- RouterStaticTable
--
-- *****************************************************************
-- agentIgmpSnoopRouterStaticTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentIgmpSnoopRouterStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for static router ports."
-- ::= { agentSwitchIGMPSnoopingGroupExtension 108 }
--
--
-- agentIgmpSnoopRouterStaticEntry OBJECT-TYPE
-- SYNTAX AgentIgmpSnoopRouterStaticEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry for static router ports."
-- INDEX { agentIgmpSnoopRouterStaticVlanIndex }
-- ::= { agentIgmpSnoopRouterStaticTable 1 }
--
--
-- AgentIgmpSnoopRouterStaticEntry ::= SEQUENCE {
-- agentIgmpSnoopRouterStaticVlanIndex Unsigned32,
-- agentIgmpSnoopRouterStaticPorts OCTET STRING (SIZE(0..255)),
-- agentIgmpSnoopRouterStaticStatus INTEGER
-- }
--
-- agentIgmpSnoopRouterStaticVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "index of static router ports table"
-- ::= { agentIgmpSnoopRouterStaticEntry 1 }
--
-- agentIgmpSnoopRouterStaticPorts OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE(0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are static router ports."
-- ::= { agentIgmpSnoopRouterStaticEntry 2 }
--
-- agentIgmpSnoopRouterStaticStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- valid(1),
-- invalid(4)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "status all static router ports."
-- ::= { agentIgmpSnoopRouterStaticEntry 3 }
-- *****************************************************************
-- MulticastCurrentTable
--
-- *****************************************************************
-- agentIgmpSnoopMulticastCurrentTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentIgmpSnoopMulticastCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Table for current multicast addresses."
-- ::= { agentSwitchIGMPSnoopingGroupExtension 110 }
--
--
-- agentIgmpSnoopMulticastCurrentEntry OBJECT-TYPE
-- SYNTAX AgentIgmpSnoopMulticastCurrentEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry for current multicast addresses."
-- INDEX { agentIgmpSnoopMulticastCurrentVlanIndex, agentIgmpSnoopMulticastCurrentMacAddress }
-- ::= { agentIgmpSnoopMulticastCurrentTable 1 }
--
--
-- AgentIgmpSnoopMulticastCurrentEntry ::= SEQUENCE {
-- agentIgmpSnoopMulticastCurrentVlanIndex Unsigned32,
-- agentIgmpSnoopMulticastCurrentMacAddress MacAddress,
-- agentIgmpSnoopMulticastCurrentPorts OCTET STRING (SIZE(0..255)),
-- agentIgmpSnoopMulticastCurrentStatus OCTET STRING (SIZE(0..255))
-- }
--
-- agentIgmpSnoopMulticastCurrentVlanIndex OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB."
-- ::= { agentIgmpSnoopMulticastCurrentEntry 1 }
--
-- agentIgmpSnoopMulticastCurrentMacAddress OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "IP address of multicast group."
-- ::= { agentIgmpSnoopMulticastCurrentEntry 2 }
--
-- agentIgmpSnoopMulticastCurrentPorts OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE(0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are members."
-- ::= { agentIgmpSnoopMulticastCurrentEntry 3 }
--
-- agentIgmpSnoopMulticastCurrentStatus OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE(0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The set of ports which are static members."
-- ::= { agentIgmpSnoopMulticastCurrentEntry 4 }
--*****************************************************************
-- For Snooping L2 Multicast Static (Integrated Version), 20080507
--*****************************************************************
-- *****************************************************************
-- IGMP L2 Multicast Static Table
--
-- *****************************************************************
agentIgmpSnoopL2MulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIgmpSnoopL2MulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for IGMP snooping static multicast addresses."
::= { agentSwitchSnoopingGroupExtension 112 }
agentIgmpSnoopL2MulticastStaticEntry OBJECT-TYPE
SYNTAX AgentIgmpSnoopL2MulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static multicast addresses."
INDEX { agentIgmpSnoopL2MulticastStaticIndex }
::= { agentIgmpSnoopL2MulticastStaticTable 1 }
AgentIgmpSnoopL2MulticastStaticEntry ::= SEQUENCE {
agentIgmpSnoopL2MulticastStaticIndex Unsigned32,
agentIgmpSnoopL2MulticastStaticVlanId Unsigned32,
agentIgmpSnoopL2MulticastStaticMacAddress MacAddress,
agentIgmpSnoopL2MulticastStaticMemberPortMask AgentPortMask,
agentIgmpSnoopL2MulticastStaticActivePortMask AgentPortMask,
agentIgmpSnoopL2MulticastStaticMemberPorts OCTET STRING,
agentIgmpSnoopL2MulticastStaticActivePorts OCTET STRING
}
agentIgmpSnoopL2MulticastStaticIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of agentIgmpSnoopL2MulticastStaticEntry."
::= { agentIgmpSnoopL2MulticastStaticEntry 1 }
agentIgmpSnoopL2MulticastStaticVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB."
::= { agentIgmpSnoopL2MulticastStaticEntry 2 }
agentIgmpSnoopL2MulticastStaticMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of multicast group."
::= { agentIgmpSnoopL2MulticastStaticEntry 3 }
agentIgmpSnoopL2MulticastStaticMemberPortMask OBJECT-TYPE
SYNTAX AgentPortMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGMP Snooping L2 Multicast Static Port Mask."
DEFVAL { '000000000000'H }
::= { agentIgmpSnoopL2MulticastStaticEntry 4 }
agentIgmpSnoopL2MulticastStaticActivePortMask OBJECT-TYPE
SYNTAX AgentPortMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGMP Snooping L2 Multicast Static Active Port Mask."
DEFVAL { '000000000000'H }
::= { agentIgmpSnoopL2MulticastStaticEntry 5 }
agentIgmpSnoopL2MulticastStaticMemberPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are members. (2,3) means port 2 and port 3 are Multicast Static Ports."
::= { agentIgmpSnoopL2MulticastStaticEntry 6 }
agentIgmpSnoopL2MulticastStaticActivePorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are active. (2,3) means port 2 and port 3 are active."
::= { agentIgmpSnoopL2MulticastStaticEntry 7 }
-- *****************************************************************
-- MLD Multicast Static Table
--
-- *****************************************************************
agentMldSnoopL2MulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentMldSnoopL2MulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for MLD snooping static multicast addresses."
::= { agentSwitchSnoopingGroupExtension 113 }
agentMldSnoopL2MulticastStaticEntry OBJECT-TYPE
SYNTAX AgentMldSnoopL2MulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static multicast addresses."
INDEX { agentMldSnoopL2MulticastStaticIndex }
::= { agentMldSnoopL2MulticastStaticTable 1 }
AgentMldSnoopL2MulticastStaticEntry ::= SEQUENCE {
agentMldSnoopL2MulticastStaticIndex Unsigned32,
agentMldSnoopL2MulticastStaticVlanId Unsigned32,
agentMldSnoopL2MulticastStaticMacAddress MacAddress,
agentMldSnoopL2MulticastStaticMemberPortMask AgentPortMask,
agentMldSnoopL2MulticastStaticActivePortMask AgentPortMask,
agentMldSnoopL2MulticastStaticMemberPorts OCTET STRING,
agentMldSnoopL2MulticastStaticActivePorts OCTET STRING
}
agentMldSnoopL2MulticastStaticIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of agentMldSnoopL2MulticastStaticEntry."
::= { agentMldSnoopL2MulticastStaticEntry 1 }
agentMldSnoopL2MulticastStaticVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB."
::= { agentMldSnoopL2MulticastStaticEntry 2 }
agentMldSnoopL2MulticastStaticMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of multicast group."
::= { agentMldSnoopL2MulticastStaticEntry 3 }
agentMldSnoopL2MulticastStaticMemberPortMask OBJECT-TYPE
SYNTAX AgentPortMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MLD Snooping L2 Multicast Static Port Mask."
DEFVAL { '000000000000'H }
::= { agentMldSnoopL2MulticastStaticEntry 4 }
agentMldSnoopL2MulticastStaticActivePortMask OBJECT-TYPE
SYNTAX AgentPortMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MLD Snooping L2 Multicast Static Active Port Mask."
DEFVAL { '000000000000'H }
::= { agentMldSnoopL2MulticastStaticEntry 5 }
agentMldSnoopL2MulticastStaticMemberPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are members. (2,3) means port 2 and port 3 are Multicast Static Ports."
::= { agentMldSnoopL2MulticastStaticEntry 6 }
agentMldSnoopL2MulticastStaticActivePorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are active. (2,3) means port 2 and port 3 are active."
::= { agentMldSnoopL2MulticastStaticEntry 7 }
--***********************************************
--**************************************************************************************
-- agentSwitchCurrBootFilesGroupExtension
--**************************************************************************************
agentSwitchCurrBootFilesGroupExtension OBJECT IDENTIFIER ::= { switchingExtension 103 }
agentSwitchCurrBootRomFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current BootRom Filename. This is shown on vxWorks plateforms. "
::= { agentSwitchCurrBootFilesGroupExtension 1 }
agentSwitchCurrBootLoaderFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Boot Loader Filename. This is shown on vxWorks plateforms. "
::= { agentSwitchCurrBootFilesGroupExtension 3 }
agentSwitchCurrBootConfigFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current configuration Filename "
::= { agentSwitchCurrBootFilesGroupExtension 5 }
agentSwitchCurrBootOpCodeFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current Operation Code Filename "
::= { agentSwitchCurrBootFilesGroupExtension 7 }
agentSwitchCurrUBootFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current UBoot Filename. This is shown on linux plateforms. "
::= { agentSwitchCurrBootFilesGroupExtension 9 }
agentSwitchCurrKernelFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Kernel Filename. This is shown on linux plateforms. "
::= { agentSwitchCurrBootFilesGroupExtension 11 }
agentSwitchCurrVMTracerFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VMTracer image Filename. This is shown on vmtracer supported L3 linux plateforms. "
::= { agentSwitchCurrBootFilesGroupExtension 12 }
--**************************************************************************************
-- agentLinkStateConfigGroup
--**************************************************************************************
agentLinkStateConfigGroup OBJECT IDENTIFIER ::= { switchingExtension 15 }
agentLinkStateConfigAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administration mode of the Link state."
::= { agentLinkStateConfigGroup 1 }
-- *****************************************************************
-- agentLinkStateGroupTable
-- *****************************************************************
agentLinkStateGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLinkStateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes entries for the status of
all currently configured Link state group."
::= { agentLinkStateConfigGroup 2 }
agentLinkStateGroupEntry OBJECT-TYPE
SYNTAX AgentLinkStateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes entries for the status of
all currently configured Link state group."
INDEX { agentLinkStateGroupId }
::= { agentLinkStateGroupTable 1 }
AgentLinkStateGroupEntry ::= SEQUENCE {
agentLinkStateGroupId
Integer32,
agentLinkStateGroupMode
INTEGER,
agentLinkStateGroupUpstreamPort
DisplayString,
agentLinkStateGroupDownstreamPort
DisplayString,
agentLinkStateGroupStatus
RowStatus
}
agentLinkStateGroupId OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the Link State group."
::= { agentLinkStateGroupEntry 1 }
agentLinkStateGroupMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of this Link State group."
::= { agentLinkStateGroupEntry 2 }
agentLinkStateGroupUpstreamPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The up stream port of the Link State group."
::= { agentLinkStateGroupEntry 3 }
agentLinkStateGroupDownstreamPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The down stream port of the Link State group."
::= { agentLinkStateGroupEntry 4 }
agentLinkStateGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of Link State group.
active(1) - This group setting is active.
createAndGo(4) - Set to this value to create a new group.
destroy(6) - Set to this value to remove this group."
::= { agentLinkStateGroupEntry 5 }
--**************************************************************************************
-- agentPortBackupConfigGroup
--**************************************************************************************
agentPortBackupConfigGroup OBJECT IDENTIFIER ::= { switchingExtension 16 }
agentPortBackupConfigAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administration mode of the Port-backup."
::= { agentPortBackupConfigGroup 1 }
-- *****************************************************************
-- agentPortBackupGroupTable
-- *****************************************************************
agentPortBackupGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentPortBackupGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes entries for the status of
all currently configured Port-backup group."
::= { agentPortBackupConfigGroup 2 }
agentPortBackupGroupEntry OBJECT-TYPE
SYNTAX AgentPortBackupGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes entries for the status of
all currently configured Port-backup group."
INDEX { agentPortBackupGroupId }
::= { agentPortBackupGroupTable 1 }
AgentPortBackupGroupEntry ::= SEQUENCE {
agentPortBackupGroupId
Integer32,
agentPortBackupGroupMode
INTEGER,
agentPortBackupGroupActivePort
DisplayString,
agentPortBackupGroupBackupPort
DisplayString,
agentMacMoveUpdatetMode
INTEGER,
agentPortBackupGroupStatus
RowStatus,
agentPortBackupGroupFailBackTime
Integer32
}
agentPortBackupGroupId OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the Port-backup group."
::= { agentPortBackupGroupEntry 1 }
agentPortBackupGroupMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of this Port-backup group."
::= { agentPortBackupGroupEntry 2 }
agentPortBackupGroupActivePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active port of the Port-backup group."
::= { agentPortBackupGroupEntry 3 }
agentPortBackupGroupBackupPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup port of the Port-backup group."
::= { agentPortBackupGroupEntry 4 }
agentMacMoveUpdatetMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of MAC Address-Table Move Update."
::= { agentPortBackupGroupEntry 5 }
agentPortBackupGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of Port-backup group.
active(1) - This group setting is active.
createAndGo(4) - Set to this value to create a new group.
destroy(6) - Set to this value to remove this group."
::= { agentPortBackupGroupEntry 6 }
agentPortBackupGroupFailBackTime OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the Port-backup fail back time."
::= { agentPortBackupGroupEntry 7 }
--**************************************************************************************
-- agentCDPConfigGroup
--**************************************************************************************
agentCDPConfigGroup OBJECT IDENTIFIER ::= { switchingExtension 110 }
agentCDPConfigAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable/disable CDP (Cisco Discovery Protocol)"
DEFVAL { disable }
::= { agentCDPConfigGroup 1 }
agentCDPConfigTimeToLive OBJECT-TYPE
SYNTAX Unsigned32 (10..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time that CDP information will be kept in other CDP-aware switch. The range is 10 to 255."
::= { agentCDPConfigGroup 2 }
agentCDPConfigTransmitInterval OBJECT-TYPE
SYNTAX Unsigned32 (5..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval that the CDP information is sent. The range is 5 to 254."
::= { agentCDPConfigGroup 3 }
agentCDPConfigNumInPkts OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CDP packets received."
::= { agentCDPConfigGroup 4 }
agentCDPConfigNumOutPkts OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CDP packets sent out."
::= { agentCDPConfigGroup 5 }
agentCDPConfigNumErrPkts OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of error CDP packets received/sent."
::= { agentCDPConfigGroup 6 }
agentCDPConfigResetNumPkts OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"reset CDP in/out/err packet counters"
DEFVAL { disable }
::= { agentCDPConfigGroup 7 }
agentCDPConfigResetDeviceInformation OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear CDP neighbor information"
DEFVAL { disable }
::= { agentCDPConfigGroup 8}
agentCDPConfigPortModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentCDPConfigPortModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch CDP administration table"
::= { agentCDPConfigGroup 10 }
agentCDPConfigPortModeEntry OBJECT-TYPE
SYNTAX AgentCDPConfigPortModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CDP administration setting for a specific port."
INDEX { agentCDPConfigPortModeIfIndex }
::= { agentCDPConfigPortModeTable 1 }
AgentCDPConfigPortModeEntry ::=
SEQUENCE {
agentCDPConfigPortModeIfIndex Integer32,
agentCDPConfigPortModeAdminMode INTEGER
}
agentCDPConfigPortModeIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port index used to uniquelly identify an entry of the CDP administration Table"
::= { agentCDPConfigPortModeEntry 1 }
agentCDPConfigPortModeAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CDP administration for every individual port. "
::= { agentCDPConfigPortModeEntry 2 }
agentCDPConfigNeighborInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentCDPConfigNeighborInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch CDP neighbor information table"
::= { agentCDPConfigGroup 20 }
agentCDPConfigNeighborInfoEntry OBJECT-TYPE
SYNTAX AgentCDPConfigNeighborInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CDP neighbor information."
INDEX { agentCDPConfigNeighborInfoIndex }
::= { agentCDPConfigNeighborInfoTable 1 }
AgentCDPConfigNeighborInfoEntry ::=
SEQUENCE {
agentCDPConfigNeighborInfoIndex Integer32,
agentCDPConfigNeighborInfoDeviceID DisplayString,
agentCDPConfigNeighborInfoLocalIF Integer32,
agentCDPConfigNeighborInfoHoldTime Integer32,
agentCDPConfigNeighborInfoCapability DisplayString,
agentCDPConfigNeighborInfoPlatform DisplayString,
agentCDPConfigNeighborInfoPortID DisplayString,
agentCDPConfigNeighborInfoManagementAddress IpAddress
}
agentCDPConfigNeighborInfoIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"index used to uniquelly identify an entry of the CDP neighbor information Table"
::= { agentCDPConfigNeighborInfoEntry 1 }
agentCDPConfigNeighborInfoDeviceID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"neighbor CDP device ID. "
::= { agentCDPConfigNeighborInfoEntry 2 }
agentCDPConfigNeighborInfoLocalIF OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local IF number from which the CDP packets are received. "
::= { agentCDPConfigNeighborInfoEntry 3 }
agentCDPConfigNeighborInfoHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CDP packets' time to live. "
::= { agentCDPConfigNeighborInfoEntry 4 }
agentCDPConfigNeighborInfoCapability OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"neighborhood's capabilities. "
::= { agentCDPConfigNeighborInfoEntry 5 }
agentCDPConfigNeighborInfoPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"neighborhood's platform. "
::= { agentCDPConfigNeighborInfoEntry 6 }
agentCDPConfigNeighborInfoPortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"neighborhood's port ID from which the CDP packets are sent out. "
::= { agentCDPConfigNeighborInfoEntry 7 }
agentCDPConfigNeighborInfoManagementAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"neighborhood's management address from which the CDP packets are sent out. "
::= { agentCDPConfigNeighborInfoEntry 8 }
--**************************************************************************************
-- agentVlanVoiceConfigGroup
--**************************************************************************************
agentVlanVoiceConfigGroup OBJECT IDENTIFIER ::= { switchingExtension 111 }
agentVlanVoiceVlanIDCreate OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice Vlan Vlan Id."
::= { agentVlanVoiceConfigGroup 1 }
agentVlanVoiceAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice Vlan administration."
::= { agentVlanVoiceConfigGroup 2 }
agentVlanVoiceMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice Vlan MAC address. Multicast mac address is not allowed."
::= { agentVlanVoiceConfigGroup 3 }
agentVlanVoiceMacMask OBJECT-TYPE
SYNTAX Integer32 (0 | 128 | 192 | 224 | 240 | 248 | 252 | 254 | 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice Vlan MAC mask."
::= { agentVlanVoiceConfigGroup 4 }
agentVlanVoicePriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice Vlan priority."
::= { agentVlanVoiceConfigGroup 5 }
agentVlanVoiceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice Vlan name."
::= { agentVlanVoiceConfigGroup 6 }
-- *****************************************************************
-- agentVlanVoiceConfigTable
--
-- *****************************************************************
agentVlanVoiceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentVlanVoiceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch Voice Vlan show table."
::= { agentVlanVoiceConfigGroup 7 }
agentVlanVoiceConfigEntry OBJECT-TYPE
SYNTAX AgentVlanVoiceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch Voice Vlan show entry."
INDEX { agentVlanVoiceConfigIndex }
::= { agentVlanVoiceConfigTable 1 }
AgentVlanVoiceConfigEntry ::=
SEQUENCE {
agentVlanVoiceConfigIndex Integer32,
agentVlanVoiceConfigName DisplayString,
agentVlanVoiceConfigMacAddress DisplayString,
agentVlanVoiceConfigMacMask Integer32,
agentVlanVoiceConfigPriority Integer32,
agentVlanVoiceConfigDelete INTEGER
}
agentVlanVoiceConfigIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voice Vlan Index."
::= { agentVlanVoiceConfigEntry 1 }
agentVlanVoiceConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Voice Vlan name."
::= { agentVlanVoiceConfigEntry 2 }
agentVlanVoiceConfigMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Voice Vlan MAC address."
::= { agentVlanVoiceConfigEntry 3 }
agentVlanVoiceConfigMacMask OBJECT-TYPE
SYNTAX Integer32 (0 | 128 | 192 | 224 | 240 | 248 | 252 | 254 | 255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Voice Vlan MAC mask."
::= { agentVlanVoiceConfigEntry 4 }
agentVlanVoiceConfigPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Voice Vlan priority."
::= { agentVlanVoiceConfigEntry 5 }
agentVlanVoiceConfigDelete OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove Voice Vlan entry."
::= { agentVlanVoiceConfigEntry 6 }
-- *****************************************************************
-- agentVlanVoiceConfigPortModeTable
--
-- *****************************************************************
-- agentVlanVoiceConfigPortModeTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentVlanVoiceConfigPortModeEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The switch Voice Vlan administration table"
-- ::= { agentVlanVoiceConfigGroup 11 }
-- agentVlanVoiceConfigPortModeEntry OBJECT-TYPE
-- SYNTAX AgentVlanVoiceConfigPortModeEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Voice Vlan administration setting for a specific port."
-- INDEX { agentVlanVoiceConfigPortModeIfIndex }
-- ::= { agentVlanVoiceConfigPortModeTable 1 }
-- AgentVlanVoiceConfigPortModeEntry ::=
-- SEQUENCE {
-- agentVlanVoiceConfigPortModeIfIndex Integer32,
-- agentVlanVoiceConfigPortModeAdminMode INTEGER
-- }
-- agentVlanVoiceConfigPortModeIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "port index used to uniquelly identify an entry of the Voice Vlan administration Table"
-- ::= { agentVlanVoiceConfigPortModeEntry 1 }
-- agentVlanVoiceConfigPortModeAdminMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Voice Vlan administration for every individual port. "
-- ::= { agentVlanVoiceConfigPortModeEntry 2 }
--**************************************************************************************
-- agentVoiceVlanConfigGroup
--**************************************************************************************
agentVoiceVlanConfigGroup OBJECT IDENTIFIER ::= { switchingExtension 114 }
agentVoiceVlanAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice Vlan administration Mode. The default mode is disabled."
DEFVAL { disable }
::= { agentVoiceVlanConfigGroup 1 }
-- *****************************************************************
-- agentVoiceVlanConfigTable
--
-- *****************************************************************
agentVoiceVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentVoiceVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch Voice Vlan show table."
::= { agentVoiceVlanConfigGroup 2 }
agentVoiceVlanConfigEntry OBJECT-TYPE
SYNTAX AgentVoiceVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch Voice Vlan show entry."
INDEX { agentVoiceVlanConfigIndex }
::= { agentVoiceVlanConfigTable 1 }
AgentVoiceVlanConfigEntry ::=
SEQUENCE {
agentVoiceVlanConfigIndex Integer32,
agentVoiceVlanConfigIfMode INTEGER,
agentVoiceVlanConfigIfModeValue Integer32,
agentVoiceVlanConfigCosOverrideMode INTEGER,
agentVoiceVlanConfigOperState INTEGER
}
agentVoiceVlanConfigIndex OBJECT-TYPE
SYNTAX Integer32 (0..4093)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voice Vlan Index."
::= { agentVoiceVlanConfigEntry 1 }
agentVoiceVlanConfigIfMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
vlanid(1),
dot1p(2),
none(3),
untagged(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice VLAN mode for selected interface."
DEFVAL { disable }
::= { agentVoiceVlanConfigEntry 2 }
agentVoiceVlanConfigIfModeValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice VLAN mode value of the selected interface."
::= { agentVoiceVlanConfigEntry 3 }
agentVoiceVlanConfigCosOverrideMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CoS Override mode for selected interface. The default mode is disabled."
DEFVAL { disable }
::= { agentVoiceVlanConfigEntry 4 }
agentVoiceVlanConfigOperState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the voice vlan of the given interface."
::= { agentVoiceVlanConfigEntry 5 }
--**************************************************************************************
-- agentVTPConfigGroup
--**************************************************************************************
agentVTPConfigGroup OBJECT IDENTIFIER ::= { switchingExtension 115 }
agentVTPAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the VTP feature. The default mode is enabled."
DEFVAL { enable }
::= { agentVTPConfigGroup 1 }
agentVTPVersion OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VTP version."
::= { agentVTPConfigGroup 2 }
agentVTPConfigRevision OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The revision for the VTP domain status."
::= { agentVTPConfigGroup 3 }
agentVTPMaxVlanNumSupported OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum VLANs supported for VTP."
::= { agentVTPConfigGroup 4 }
agentVTPVlanNumSupported OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number for VTP currently."
::= { agentVTPConfigGroup 5 }
agentVTPOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
server(0),
client(1),
transparent(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operational mode of VTP device. The default setting is server mode."
DEFVAL { server }
::= { agentVTPConfigGroup 6 }
agentVTPDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the VTP administrative domain."
::= { agentVTPConfigGroup 7 }
agentVTPPruningMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the VTP pruning mode."
DEFVAL { disable }
::= { agentVTPConfigGroup 8 }
agentVTPDomainPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The the password for the VTP administrative domain."
::= { agentVTPConfigGroup 9 }
agentVTPV2Mode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the VTP V2 mode."
DEFVAL { disable }
::= { agentVTPConfigGroup 10 }
agentVTPMD5Digest OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 Digest for the VTP domain status."
::= { agentVTPConfigGroup 11 }
agentVTPConfigLastModified OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of the last configuration modification and
the IP address of the switch that caused the configuration
change to the database."
::= { agentVTPConfigGroup 12 }
agentVTPLocalUpdaterID OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local updater ID for the VTP domain status."
::= { agentVTPConfigGroup 13 }
-- *****************************************************************
-- agentVTPPortConfigTable
--
-- *****************************************************************
agentVTPPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentVTPPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VTP Trunk status show table."
::= { agentVTPConfigGroup 14 }
agentVTPPortConfigEntry OBJECT-TYPE
SYNTAX AgentVTPPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch Voice Vlan show entry."
INDEX { agentVTPPortConfigIndex }
::= { agentVTPPortConfigTable 1 }
AgentVTPPortConfigEntry ::=
SEQUENCE {
agentVTPPortConfigIndex Integer32,
agentVTPPortConfigTrunkMode INTEGER
}
agentVTPPortConfigIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VTP Trunkport Index."
::= { agentVTPPortConfigEntry 1 }
agentVTPPortConfigTrunkMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VTP Trunk mode for selected interface."
DEFVAL { disable }
::= { agentVTPPortConfigEntry 2 }
--**************************************************************************************
--**************************************************************************************
-- FIP Snooping Table
--
--**************************************************************************************
agentFIPSnoopingGroup OBJECT IDENTIFIER ::= { switchingExtension 116 }
agentFIPSnoopingAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the FIPSnooping feature. The default mode is disable."
DEFVAL { disable }
::= { agentFIPSnoopingGroup 1 }
agentFIPSnoopingVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentFIPSnoopingVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the FIP Snooping Vlan configuration entries."
::= { agentFIPSnoopingGroup 2 }
agentFIPSnoopingVlanConfigEntry OBJECT-TYPE
SYNTAX AgentFIPSnoopingVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a FIP Snooping configurable Vlan."
INDEX { agentFIPSnoopingVlanIndex }
::= { agentFIPSnoopingVlanConfigTable 1 }
AgentFIPSnoopingVlanConfigEntry ::= SEQUENCE {
agentFIPSnoopingVlanIndex
Integer32,
agentFIPSnoopingVlanAdminMode
INTEGER
}
agentFIPSnoopingVlanIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VlanIndex values in the vlans."
::= { agentFIPSnoopingVlanConfigEntry 1 }
agentFIPSnoopingVlanAdminMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enables or disables FIP Snooping on a selected Vlan interface."
DEFVAL { disable }
::= { agentFIPSnoopingVlanConfigEntry 2 }
--Remove by KevinLee 2014/07/21 [Defect: Bugzilla <20>V Bug 519]
-- agentFIPSnoopingFCMap OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The value of FC-MAP value."
-- ::= { agentFIPSnoopingGroup 3 }
--
-- agentFIPSnoopingPortConfigTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF AgentFIPSnoopingPortConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table that contains the configuration objects for the
-- with each port."
--
-- ::= { agentFIPSnoopingGroup 4 }
--
-- agentFIPSnoopingPortConfigEntry OBJECT-TYPE
-- SYNTAX AgentFIPSnoopingPortConfigEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The configuration information for FIP Snooping on a selected interface."
-- INDEX { agentFIPSnoopingPortIndex }
-- ::= { agentFIPSnoopingPortConfigTable 1 }
--
-- AgentFIPSnoopingPortConfigEntry ::=
-- SEQUENCE {
-- agentFIPSnoopingPortIndex
-- Integer32,
-- agentFIPSnoopingPortMode
-- INTEGER
-- }
--
-- agentFIPSnoopingPortIndex OBJECT-TYPE
-- SYNTAX Integer32 (0..2147483647)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "ifIndex values in the ifTable."
-- ::= { agentFIPSnoopingPortConfigEntry 1 }
--
-- agentFIPSnoopingPortMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- disable(0),
-- enable(1)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "It specifies FCF is connected to the interface. It can be either enable or disable
-- default will be disable."
-- DEFVAL { disable }
-- ::= { agentFIPSnoopingPortConfigEntry 2 }
agentFIPSnoopingSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentFIPSnoopingSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the objects for the
with each port."
::= { agentFIPSnoopingGroup 5 }
agentFIPSnoopingSessionEntry OBJECT-TYPE
SYNTAX AgentFIPSnoopingSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information for FIP Snooping sessions."
INDEX { agentFIPSnoopingSessionKey }
::= { agentFIPSnoopingSessionTable 1 }
AgentFIPSnoopingSessionEntry ::=
SEQUENCE {
agentFIPSnoopingSessionKey
PhysAddress,
agentFIPSnoopingSessionIfIndex
Integer32,
agentFIPSnoopingSessionFCFMacAddress
PhysAddress,
agentFIPSnoopingSessionENodeMacAddress
PhysAddress,
agentFIPSnoopingSessionENodeIfIndex
Integer32
}
agentFIPSnoopingSessionKey OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FIP Snooping Session Key."
::= { agentFIPSnoopingSessionEntry 1 }
agentFIPSnoopingSessionIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the interface which is connected."
::= { agentFIPSnoopingSessionEntry 2 }
agentFIPSnoopingSessionFCFMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FCF MAC address of the session."
::= { agentFIPSnoopingSessionEntry 3 }
agentFIPSnoopingSessionENodeMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ENode MAC address of the session."
::= { agentFIPSnoopingSessionEntry 4 }
agentFIPSnoopingSessionENodeIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ENode interface of the session."
::= { agentFIPSnoopingSessionEntry 5 }
agentFIPSnoopingFCFTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentFIPSnoopingFCFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the objects for the
with each port."
::= { agentFIPSnoopingGroup 6 }
agentFIPSnoopingFCFEntry OBJECT-TYPE
SYNTAX AgentFIPSnoopingFCFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information for FIP Snooping FCF."
INDEX { agentFIPSnoopingFCFKey }
::= { agentFIPSnoopingFCFTable 1 }
AgentFIPSnoopingFCFEntry ::=
SEQUENCE {
agentFIPSnoopingFCFKey
PhysAddress,
agentFIPSnoopingFCFIfIndex
Integer32,
agentFIPSnoopingFCFVlan
VlanIndex,
agentFIPSnoopingFCFENodeNumber
Integer32,
agentFIPSnoopingFCFFCMap
Integer32,
agentFIPSnoopingFCFSwitchName
DisplayString,
agentFIPSnoopingFCFFabricName
DisplayString
}
agentFIPSnoopingFCFKey OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FIP Snooping FCF Key."
::= { agentFIPSnoopingFCFEntry 1 }
agentFIPSnoopingFCFIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the interface to which the FCoE Forwarder (FCF) is connected."
::= { agentFIPSnoopingFCFEntry 2 }
agentFIPSnoopingFCFVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan Index for which this entry is associated with."
::= { agentFIPSnoopingFCFEntry 3 }
agentFIPSnoopingFCFENodeNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ENodes that are connected to the FCF"
::= { agentFIPSnoopingFCFEntry 4 }
agentFIPSnoopingFCFFCMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FC-Map value used by the FCF. The default value is 0xEFC00."
::= { agentFIPSnoopingFCFEntry 5 }
agentFIPSnoopingFCFSwitchName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name ID"
::= { agentFIPSnoopingFCFEntry 6 }
agentFIPSnoopingFCFFabricName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the FCF."
::= { agentFIPSnoopingFCFEntry 7 }
agentFIPSnoopingENodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentFIPSnoopingENodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the objects for the
with each port."
::= { agentFIPSnoopingGroup 7 }
agentFIPSnoopingENodeEntry OBJECT-TYPE
SYNTAX AgentFIPSnoopingENodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information for FIP Snooping ENode."
INDEX { agentFIPSnoopingENodeKey }
::= { agentFIPSnoopingENodeTable 1 }
AgentFIPSnoopingENodeEntry ::=
SEQUENCE {
agentFIPSnoopingENodeKey
PhysAddress,
agentFIPSnoopingENodeIfIndex
Integer32,
agentFIPSnoopingENodeVlan
VlanIndex,
agentFIPSnoopingENodeNameID
DisplayString
}
agentFIPSnoopingENodeKey OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FIP Snooping ENode Key."
::= { agentFIPSnoopingENodeEntry 1 }
agentFIPSnoopingENodeIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface of enode."
::= { agentFIPSnoopingENodeEntry 2 }
agentFIPSnoopingENodeVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan Index for which this entry is associated with."
::= { agentFIPSnoopingENodeEntry 3 }
agentFIPSnoopingENodeNameID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name ID"
::= { agentFIPSnoopingENodeEntry 4}
--**************************************************************************************
-- MLAG Group
--
--**************************************************************************************
agentMLAGGroup OBJECT IDENTIFIER ::= { switchingExtension 117 }
agentMLAGAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the MLAG feature. The default mode is disabled."
DEFVAL { disable }
::= { agentMLAGGroup 1 }
agentMLAGDomainId OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the domain Id of Multi-Chassis Link Aggregation."
DEFVAL { 1 }
::= { agentMLAGGroup 2 }
agentMLAGConfigurationConsistancyStatus OBJECT-TYPE
SYNTAX INTEGER {
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Check the switch configuration for consistency parameter."
::= { agentMLAGGroup 3 }
agentMLAGMemberCount OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the number of MLAG members."
::= { agentMLAGGroup 4 }
agentMLAGSystemMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the system mac of Multi-Chassis Link Aggregation."
::= { agentMLAGGroup 5 }
agentMLAGKeepaliveTimeout OBJECT-TYPE
SYNTAX INTEGER (5..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To specify the timeout (in seconds) between re-transmissions to the MLAG peer device. The range is from 3 to 20. The default is 5."
DEFVAL { 1 }
::= { agentMLAGGroup 6 }
agentMLAGPeerGatewayMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Layer 3 forwarding for packets destined to the gateway MAC address of the MLAG. The default mode is enabled."
DEFVAL { disable }
::= { agentMLAGGroup 7 }
agentMLAGDelayRestore OBJECT-TYPE
SYNTAX INTEGER (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To delay the MLAG from coming up on the restored MLAG peer device after a reload when the peer adjacency is already established. The default value is 0, it means that there is no delay time. The range of delay time is from 5 to 600 seconds."
DEFVAL { 1 }
::= { agentMLAGGroup 8 }
agentMLAGMemberLinkdownMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable member port link down mode when MLAG is starting or stopping. The default mode is disabled."
DEFVAL { disable }
::= { agentMLAGGroup 9 }
--**************************************************************************************
-- MLAG peer link Group
--
--**************************************************************************************
agentMLAGPeerLinkGroup OBJECT IDENTIFIER ::= { agentMLAGGroup 10 }
agentMLAGPeerLinkifIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this to set MLAG peer link interface.
Set 0 to disable MLAG peer link."
::= { agentMLAGPeerLinkGroup 1 }
agentMLAGPeerLinkifStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show MLAG peer link interface status."
::= { agentMLAGPeerLinkGroup 2 }
agentMLAGPeerLinkActiveVlans OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show MLAG peer link interface active vlans."
::= { agentMLAGPeerLinkGroup 3 }
agentMLAGPeerLinkForbiddenVlans OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show MLAG peer link interface forbidden vlans."
::= { agentMLAGPeerLinkGroup 4 }
--**************************************************************************************
-- MLAG port channel
--
--**************************************************************************************
agentMLAGPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentMLAGPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Multi-Chassis Link Aggregation
port channel status for the specified interface."
::= { agentMLAGGroup 11 }
agentMLAGPortChannelEntry OBJECT-TYPE
SYNTAX AgentMLAGPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Multi-Chassis Link Aggregation
port channel status for the specified interface."
INDEX { agentMLAGPortChannelifIndex }
::= { agentMLAGPortChannelTable 1 }
AgentMLAGPortChannelEntry ::= SEQUENCE {
agentMLAGPortChannelifIndex
InterfaceIndex,
agentMLAGPortChannelId
INTEGER,
agentMLAGPortChannelifIndexStatus
INTEGER,
agentMLAGPortChannelConsistancy
INTEGER,
agentMLAGPortChannelActiveVlans
DisplayString
}
agentMLAGPortChannelifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a unique index for an entry in the
agentMLAGPortChannelTable. A non-zero value
indicates the ifIndex for the corresponding interface
entry in the ifTable."
::= { agentMLAGPortChannelEntry 1 }
agentMLAGPortChannelId OBJECT-TYPE
SYNTAX INTEGER (0..4096)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identity of MLAG port channel number.
Zero to disable MLAG mode."
::= { agentMLAGPortChannelEntry 2 }
agentMLAGPortChannelifIndexStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface status of MLAG port channel number."
::= { agentMLAGPortChannelEntry 3 }
agentMLAGPortChannelConsistancy OBJECT-TYPE
SYNTAX INTEGER {
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configuration consistancy of MLAG port channel number."
::= { agentMLAGPortChannelEntry 4 }
agentMLAGPortChannelActiveVlans OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Active vlans of MLAG port channel number."
::= { agentMLAGPortChannelEntry 5 }
--**************************************************************************************
-- MLAG vlan routing interface
--
--**************************************************************************************
agentMLAGVlanRoutingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentMLAGVlanRoutingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Multi-Chassis Link Aggregation
Forbidden Configuration for the specified vlan routing interface."
::= { agentMLAGGroup 12 }
agentMLAGVlanRoutingPortEntry OBJECT-TYPE
SYNTAX AgentMLAGVlanRoutingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Multi-Chassis Link Aggregation
Forbidden Configuration for the specified vlan routing interface."
INDEX { agentMLAGVlanRoutingPortifIndex }
::= { agentMLAGVlanRoutingPortTable 1 }
AgentMLAGVlanRoutingPortEntry ::= SEQUENCE {
agentMLAGVlanRoutingPortifIndex
InterfaceIndex,
agentMLAGVlanRoutingPortForbiddenMode
INTEGER
}
agentMLAGVlanRoutingPortifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a unique index for an entry in the
agentMLAGVlanRoutingPortTable. A non-zero value
indicates the ifIndex for the corresponding interface
entry in the ifTable."
::= { agentMLAGVlanRoutingPortEntry 1 }
agentMLAGVlanRoutingPortForbiddenMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable forbidden mode of VLAN on peer link interface. The default mode is disabled."
DEFVAL { disable }
::= { agentMLAGVlanRoutingPortEntry 2 }
--**************************************************************************************
-- DCBX Group
--
--**************************************************************************************
agentDCBXGroup OBJECT IDENTIFIER ::= { switchingExtension 118 }
--**************************************************************************************
-- DCBX Config Table
--
--**************************************************************************************
agentDCBXConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDCBXConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Data center bridging exchange configurations
for the specified interface."
::= { agentDCBXGroup 1 }
agentDCBXConfigEntry OBJECT-TYPE
SYNTAX AgentDCBXConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Data center bridging exchange configurations
for the specified interface."
INDEX { agentDCBXifIndex }
::= { agentDCBXConfigTable 1 }
AgentDCBXConfigEntry ::= SEQUENCE {
agentDCBXifIndex
InterfaceIndex,
agentDCBXAdminMode
INTEGER,
agentDCBXVersion
INTEGER
}
agentDCBXifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a unique index for an entry in the
agentDCBXPFCConfigTable. A non-zero value
indicates the ifIndex for the corresponding interface
entry in the ifTable."
::= { agentDCBXConfigEntry 1 }
agentDCBXAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable DCBX for the specified interface."
::= { agentDCBXConfigEntry 2 }
agentDCBXVersion OBJECT-TYPE
SYNTAX INTEGER {
cee(1),
ieee(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure DCBX version for the specified interface."
::= { agentDCBXConfigEntry 3 }
--**************************************************************************************
-- DCBX PFC Config Table
--
--**************************************************************************************
agentDCBXPFCConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDCBXPFCConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Data center bridging exchange configurations
for the specified interface."
::= { agentDCBXGroup 2 }
agentDCBXPFCConfigEntry OBJECT-TYPE
SYNTAX AgentDCBXPFCConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Data center bridging exchange configurations
for the specified interface."
INDEX { agentDCBXifIndex }
::= { agentDCBXPFCConfigTable 1 }
AgentDCBXPFCConfigEntry ::= SEQUENCE {
agentDCBXPFCEnableMode
INTEGER,
agentDCBXPFCAdvertiseMode
INTEGER,
agentDCBXPFCWillingMode
INTEGER,
agentDCBXPFCPriorityMask
Unsigned32,
agentDCBXPFCMaxTrafficClass
Unsigned32,
agentDCBXPFCOperVersion
Unsigned32,
agentDCBXPFCOperMaxVersion
Unsigned32,
agentDCBXPFCOperErrors
DisplayString,
agentDCBXPFCOperMode
INTEGER,
agentDCBXPFCOperPeerSyncd
INTEGER,
agentDCBXPFCOperPriorityMask
Unsigned32,
agentDCBXPFCOperMaxTrafficClass
Unsigned32,
agentDCBXPFCPeerLocalifIndex
InterfaceIndex,
agentDCBXPFCPeerStatus
INTEGER,
agentDCBXPFCPeerEnableMode
INTEGER,
agentDCBXPFCPeerWillingMode
INTEGER,
agentDCBXPFCPeerPriorityMask
Unsigned32,
agentDCBXPFCPeerMaxTrafficClass
Unsigned32,
agentDCBXPFCDCBXOperVersion
INTEGER
}
agentDCBXPFCEnableMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the enable mode setting for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 1 }
agentDCBXPFCAdvertiseMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configure advertise mode setting for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 2 }
agentDCBXPFCWillingMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure willing mode setting for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 3 }
agentDCBXPFCPriorityMask OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the priority mask for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 4 }
agentDCBXPFCMaxTrafficClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max traffic class for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 5 }
agentDCBXPFCOperVersion OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the version for Operational DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 6 }
agentDCBXPFCOperMaxVersion OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max version for Operational DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 7 }
agentDCBXPFCOperErrors OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows error reason for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 8 }
agentDCBXPFCOperMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the operational mode for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 9 }
agentDCBXPFCOperPeerSyncd OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show feature sync for Operational DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 10 }
agentDCBXPFCOperPriorityMask OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the priority mask for Operational DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 11 }
agentDCBXPFCOperMaxTrafficClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max traffic class for Operational DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 12 }
agentDCBXPFCPeerLocalifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the local interface for Peer DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 13 }
agentDCBXPFCPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(0),
successful(1),
unsuccessful(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the status for Peer DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 14 }
agentDCBXPFCPeerEnableMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show administrative mode setting for Peer DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 15 }
agentDCBXPFCPeerWillingMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show willing mode setting for Peer DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 16 }
agentDCBXPFCPeerPriorityMask OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show priority mask for Peer DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 17 }
agentDCBXPFCPeerMaxTrafficClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max traffic class for Peer DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 18 }
agentDCBXPFCDCBXOperVersion OBJECT-TYPE
SYNTAX INTEGER {
cee(1),
ieee(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the operational version for DCBX PFC feature."
::= { agentDCBXPFCConfigEntry 19 }
--**************************************************************************************
-- DCBX Priority Group Config Table
--
--**************************************************************************************
agentDCBXPgConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDCBXPgConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Data center bridging exchange Priority Group feature
configurations for the specified interface."
::= { agentDCBXGroup 3 }
agentDCBXPgConfigEntry OBJECT-TYPE
SYNTAX AgentDCBXPgConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Data center bridging exchange Priority Group feature
configurations for the specified interface."
INDEX { agentDCBXifIndex }
::= { agentDCBXPgConfigTable 1 }
AgentDCBXPgConfigEntry ::= SEQUENCE {
agentDCBXPgEnableMode
INTEGER,
agentDCBXPgAdvertiseMode
INTEGER,
agentDCBXPgWillingMode
INTEGER,
agentDCBXPgGroupBandwidth
DisplayString,
agentDCBXPgPriorityGroupId
DisplayString,
agentDCBXPgMaxTrafficClass
Unsigned32,
agentDCBXPgOperVersion
Unsigned32,
agentDCBXPgMaxVersion
Unsigned32,
agentDCBXPgErrorReason
DisplayString,
agentDCBXPgIsOperational
INTEGER,
agentDCBXPgSyncedMode
INTEGER,
agentDCBXPgOperGroupBandwidth
DisplayString,
agentDCBXPgOperPriorityGroupId
DisplayString,
agentDCBXPgOperMaxTrafficClass
Unsigned32,
agentDCBXPgPeerStatus
INTEGER,
agentDCBXPgPeerEnableMode
INTEGER,
agentDCBXPgPeerWillingMode
INTEGER,
agentDCBXPgPeerGroupBandwidth
DisplayString,
agentDCBXPgPeerPriorityGroupId
DisplayString,
agentDCBXPgPeerMaxTrafficClass
Unsigned32,
agentDCBXPgDCBXOperVersion
INTEGER
}
agentDCBXPgEnableMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show enable mode setting for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 1 }
agentDCBXPgAdvertiseMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable advertise mode setting for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 2 }
agentDCBXPgWillingMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable willing mode setting for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 3 }
agentDCBXPgGroupBandwidth OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show a 8 byte array which will be filled
with bandwidth of 8 priority group."
::= { agentDCBXPgConfigEntry 4 }
agentDCBXPgPriorityGroupId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show priority map for Peer DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 5 }
agentDCBXPgMaxTrafficClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max traffic class for Peer DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 6 }
agentDCBXPgOperVersion OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show opertional version for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 7 }
agentDCBXPgMaxVersion OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show max version for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 8 }
agentDCBXPgErrorReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show error reason for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 9 }
agentDCBXPgIsOperational OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the operational mode of the PG for a interface."
::= { agentDCBXPgConfigEntry 10 }
agentDCBXPgSyncedMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show feature sync for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 11 }
agentDCBXPgOperGroupBandwidth OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show a 8 byte array which will be filled
with bandwidth of 8 priority group."
::= { agentDCBXPgConfigEntry 12 }
agentDCBXPgOperPriorityGroupId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the operational priority map of the PG for a interface."
::= { agentDCBXPgConfigEntry 13 }
agentDCBXPgOperMaxTrafficClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max traffic class for Operational DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 14 }
agentDCBXPgPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
notpresent(0),
successful(1),
unsuccessful(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show status (Error bit) for Peer DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 15 }
agentDCBXPgPeerEnableMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show enable mode setting for Peer DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 16 }
agentDCBXPgPeerWillingMode OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show willing mode setting for Peer DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 17 }
agentDCBXPgPeerGroupBandwidth OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show a 8 byte array which will be filled
with bandwidth of 8 priority group."
::= { agentDCBXPgConfigEntry 18 }
agentDCBXPgPeerPriorityGroupId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show priority map for Peer DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 19 }
agentDCBXPgPeerMaxTrafficClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max traffic class for Peer DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 20 }
agentDCBXPgDCBXOperVersion OBJECT-TYPE
SYNTAX INTEGER {
cee(1),
ieee(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the operational version for DCBX Priority Group feature."
::= { agentDCBXPgConfigEntry 21 }
--
-- ***********************************************************
--
-- Textual Conventions
--
-- ***********************************************************
BridgeEvbTLVTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"EVB TLV structure."
SYNTAX BITS {
vdpCapable (0),
ecpCapable (1),
ecpRTE (2),
vdpTimerCapable (3),
reflectiveRelayCap(14),
stdForwardingCap (15)
}
--**************************************************************************************
-- EVB Group
--
--**************************************************************************************
agentEvbGroup OBJECT IDENTIFIER ::= { switchingExtension 119 }
--**************************************************************************************
-- EVB Config Table
--
--**************************************************************************************
agentEvbConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentEvbConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Edge Virtual Bridging feature
configurations for the specified interface."
::= { agentEvbGroup 1 }
agentEvbConfigEntry OBJECT-TYPE
SYNTAX AgentEvbConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Edge Virtual Bridging feature
configurations for the specified interface."
INDEX { agentEvbifIndex }
::= { agentEvbConfigTable 1 }
AgentEvbConfigEntry ::= SEQUENCE {
agentEvbifIndex
INTEGER,
agentEvbAdminMode
INTEGER,
agentEvbCapability
BridgeEvbTLVTC,
agentEvbForwardingMode
BridgeEvbTLVTC,
agentEvbRetransmissionExp
Unsigned32,
agentEvbOperCapability
BridgeEvbTLVTC,
agentEvbOperForwardingMode
BridgeEvbTLVTC,
agentEvbOperRetransmissionExp
Unsigned32
}
agentEvbifIndex OBJECT-TYPE
SYNTAX INTEGER (1..53)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface index for Evb feature."
::= { agentEvbConfigEntry 1 }
agentEvbAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable mode setting for Evb feature."
::= { agentEvbConfigEntry 2 }
agentEvbCapability OBJECT-TYPE
SYNTAX BridgeEvbTLVTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configure capabilities for Evb feature."
::= { agentEvbConfigEntry 3 }
agentEvbForwardingMode OBJECT-TYPE
SYNTAX BridgeEvbTLVTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configure forwarding mode for Evb feature."
::= { agentEvbConfigEntry 4 }
agentEvbRetransmissionExp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure RTE for Evb feature."
::= { agentEvbConfigEntry 5 }
agentEvbOperCapability OBJECT-TYPE
SYNTAX BridgeEvbTLVTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show current capabilities for Evb feature."
::= { agentEvbConfigEntry 6 }
agentEvbOperForwardingMode OBJECT-TYPE
SYNTAX BridgeEvbTLVTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show forwarding mode for Evb feature."
::= { agentEvbConfigEntry 7 }
agentEvbOperRetransmissionExp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show RTE for Evb feature."
::= { agentEvbConfigEntry 8 }
--**************************************************************************************
-- EVB VSI Group
--
--**************************************************************************************
agentEvbVsiGroup OBJECT IDENTIFIER ::= { agentEvbGroup 2 }
--**************************************************************************************
-- EVB VSI Table
--
--**************************************************************************************
agentEvbVsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentEvbVsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Edge Virtual Bridging VSI feature
status for the specified interface."
::= { agentEvbVsiGroup 1 }
agentEvbVsiEntry OBJECT-TYPE
SYNTAX AgentEvbVsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Edge Virtual Bridging VSI feature
status for the specified interface."
INDEX { agentEvbifIndex,agentEvbVsiInstanceId }
::= { agentEvbVsiTable 1 }
AgentEvbVsiEntry ::= SEQUENCE {
agentEvbVsiInstanceId
DisplayString,
agentEvbVsiMgrId
Unsigned32,
agentEvbVsiId
Unsigned32,
agentEvbVsiVersion
Unsigned32,
agentEvbVsiMode
INTEGER,
agentEvbVsiState
INTEGER,
agentEvbVsiNumMacs
Unsigned32
}
agentEvbVsiInstanceId OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface instance id for Evb Vsi feature."
::= { agentEvbVsiEntry 1 }
agentEvbVsiMgrId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface mgr id for Evb Vsi feature."
::= { agentEvbVsiEntry 2 }
agentEvbVsiId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show id for Evb Vsi feature."
::= { agentEvbVsiEntry 3 }
agentEvbVsiVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface version for Evb Vsi feature."
::= { agentEvbVsiEntry 4 }
agentEvbVsiMode OBJECT-TYPE
SYNTAX INTEGER {
preassociate(1),
preassocerr(2),
associate(3),
deassociate(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface mode for Evb Vsi feature."
::= { agentEvbVsiEntry 5 }
agentEvbVsiState OBJECT-TYPE
SYNTAX INTEGER {
unassociated(1),
assocprocessing(2),
associated(3),
preassocprocessing(4),
preassociated(5),
deassocprocessing(6),
exit(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface state for Evb Vsi feature."
::= { agentEvbVsiEntry 6 }
agentEvbVsiNumMacs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface number of Macs for Evb Vsi feature."
::= { agentEvbVsiEntry 7 }
--**************************************************************************************
-- EVB VSI Mac Table
--
--**************************************************************************************
agentEvbVsiMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentEvbVsiMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Edge Virtual Bridging VSI Mac feature
status for the specified interface."
::= { agentEvbVsiGroup 2 }
agentEvbVsiMacEntry OBJECT-TYPE
SYNTAX AgentEvbVsiMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Edge Virtual Bridging VSI Mac feature
status for the specified interface."
INDEX { agentEvbifIndex,agentEvbVsiInstanceId,agentEvbVsiMacAddress,agentEvbVsiVlanId }
::= { agentEvbVsiMacTable 1 }
AgentEvbVsiMacEntry ::= SEQUENCE {
agentEvbVsiMacAddress
MacAddress,
agentEvbVsiVlanId
INTEGER
}
agentEvbVsiMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface MacAddress for Evb Vsi feature."
::= { agentEvbVsiMacEntry 1 }
agentEvbVsiVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4093)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface VlanId for Evb Vsi feature."
::= { agentEvbVsiMacEntry 2 }
--**************************************************************************************
-- VMTracer Group
--
--**************************************************************************************
agentVMTracerGroup OBJECT IDENTIFIER ::= { switchingExtension 120 }
--**************************************************************************************
-- VMTracer Interface Control Table
--
--**************************************************************************************
agentVMTracerIfCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentVMTracerIfCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VM Tracer feature
status for the specified interface."
::= { agentVMTracerGroup 1 }
agentVMTracerIfCtlEntry OBJECT-TYPE
SYNTAX AgentVMTracerIfCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VM Tracer feature
status for the specified interface."
INDEX { agentVMTracerIfIndex }
::= { agentVMTracerIfCtlTable 1 }
AgentVMTracerIfCtlEntry ::= SEQUENCE {
agentVMTracerIfIndex
INTEGER,
agentVMTracerAdminMode
INTEGER
}
agentVMTracerIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show interface index for VM Tracer feature."
::= { agentVMTracerIfCtlEntry 1 }
agentVMTracerAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable VM Tracer mode for specified interface."
::= { agentVMTracerIfCtlEntry 2 }
--**************************************************************************************
-- VMTracer Session Table
--
--**************************************************************************************
agentVMTracerSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentVMTracerSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VM Tracer feature session."
::= { agentVMTracerGroup 2 }
agentVMTracerSessionEntry OBJECT-TYPE
SYNTAX AgentVMTracerSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VM Tracer feature session."
INDEX { agentVMTracerSessionIndex }
::= { agentVMTracerSessionTable 1 }
AgentVMTracerSessionEntry ::= SEQUENCE {
agentVMTracerSessionIndex
INTEGER,
agentVMTracerSessionName
DisplayString,
agentVMTracerSessionUrl
DisplayString,
agentVMTracerSessionUsername
DisplayString,
agentVMTracerSessionPassword
DisplayString,
agentVMTracerSessionAutoVlanMode
INTEGER,
agentVMTracerSessionAllowVlan
VlanList,
agentVMTracerSessionConnectionStatus
INTEGER,
agentVMTracerSessionClear
INTEGER
}
agentVMTracerSessionIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of VM Tracer feature session."
::= { agentVMTracerSessionEntry 1 }
agentVMTracerSessionName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of VM Tracer feature session."
::= { agentVMTracerSessionEntry 2 }
agentVMTracerSessionUrl OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Url of VM Tracer feature session."
::= { agentVMTracerSessionEntry 3 }
agentVMTracerSessionUsername OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Username of VM Tracer feature session."
::= { agentVMTracerSessionEntry 4 }
agentVMTracerSessionPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Password of VM Tracer feature session."
::= { agentVMTracerSessionEntry 5 }
agentVMTracerSessionAutoVlanMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AutoVlan mode of VM Tracer feature session."
::= { agentVMTracerSessionEntry 6 }
agentVMTracerSessionAllowVlan OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow vlan range of VM Tracer feature session."
::= { agentVMTracerSessionEntry 7 }
agentVMTracerSessionConnectionStatus OBJECT-TYPE
SYNTAX INTEGER {
connected(1),
disconnected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connection status of VM Tracer feature session."
::= { agentVMTracerSessionEntry 8 }
agentVMTracerSessionClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear current VM Tracer feature session."
::= { agentVMTracerSessionEntry 9 }
--**************************************************************************************
-- VMTracer VM Table
--
--**************************************************************************************
agentVMTracerVMTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentVMTracerVMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VM Tracer feature vm."
::= { agentVMTracerGroup 3 }
agentVMTracerVMEntry OBJECT-TYPE
SYNTAX AgentVMTracerVMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VM Tracer feature vm."
INDEX { agentVMTracerSessionIndex,agentVMTracerVMIndex }
::= { agentVMTracerVMTable 1 }
AgentVMTracerVMEntry ::= SEQUENCE {
agentVMTracerVMIndex
INTEGER,
agentVMTracerVMName
DisplayString,
agentVMTracerVMInterface
DisplayString,
agentVMTracerVMAdapter
DisplayString,
agentVMTracerVMMacAddress
DisplayString,
agentVMTracerVMPortGroup
DisplayString,
agentVMTracerVMVlanId
Unsigned32,
agentVMTracerVMSwitch
DisplayString,
agentVMTracerVMHost
DisplayString,
agentVMTracerVMHostCpuSpeed
DisplayString,
agentVMTracerVMHostMemory
DisplayString,
agentVMTracerVMHostSystem
DisplayString,
agentVMTracerVMHostVendor
DisplayString,
agentVMTracerVMHostCpuCores
Unsigned32,
agentVMTracerVMHostCpuPackages
Unsigned32
}
agentVMTracerVMIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of VM Tracer feature vm."
::= { agentVMTracerVMEntry 1 }
agentVMTracerVMName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of VM Tracer feature vm."
::= { agentVMTracerVMEntry 2 }
agentVMTracerVMInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface of VM Tracer feature vm."
::= { agentVMTracerVMEntry 3 }
agentVMTracerVMAdapter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Adapter of VM Tracer feature vm."
::= { agentVMTracerVMEntry 4 }
agentVMTracerVMMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MacAddress of VM Tracer feature vm."
::= { agentVMTracerVMEntry 5 }
agentVMTracerVMPortGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PortGroup of VM Tracer feature vm."
::= { agentVMTracerVMEntry 6 }
agentVMTracerVMVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VlanId of VM Tracer feature vm."
::= { agentVMTracerVMEntry 7 }
agentVMTracerVMSwitch OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch of VM Tracer feature vm."
::= { agentVMTracerVMEntry 8 }
agentVMTracerVMHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host of VM Tracer feature vm."
::= { agentVMTracerVMEntry 9 }
agentVMTracerVMHostCpuSpeed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host Cpu Speed of VM Tracer feature vm."
::= { agentVMTracerVMEntry 10 }
agentVMTracerVMHostMemory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host Memory of VM Tracer feature vm."
::= { agentVMTracerVMEntry 11 }
agentVMTracerVMHostSystem OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host System of VM Tracer feature vm."
::= { agentVMTracerVMEntry 12 }
agentVMTracerVMHostVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host Vendor of VM Tracer feature vm."
::= { agentVMTracerVMEntry 13 }
agentVMTracerVMHostCpuCores OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host Cpu Cores of VM Tracer feature vm."
::= { agentVMTracerVMEntry 14 }
agentVMTracerVMHostCpuPackages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host Cpu Packages of VM Tracer feature vm."
::= { agentVMTracerVMEntry 15 }
END
View Git Blame Copy Permalink