Observium_CE/mibs/quanta/DOT1X-ADVANCED-FEATURES-MIB

314 lines
12 KiB
Plaintext

-- Dot1x Advanced Features MIB overview:
-- Dot1x Advanced Features MIB falls under MIB node of the private subtree.
DOT1X-ADVANCED-FEATURES-MIB DEFINITIONS ::= BEGIN
-- Quanta Computer Inc. Dot1x Advanced Features MIB
-- Copyright 2004- Quanta Computer, Inc. All rights reserved.
-- This SNMP Management Information Specification
-- embodies Quanta Computer Inc.'s confidential and proprietary
-- intellectual property. Quanta Computer Inc. retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Quanta Computer Inc.
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32, TimeTicks FROM SNMPv2-SMI
dot1xPaePortNumber FROM IEEE8021-PAE-MIB
TEXTUAL-CONVENTION,
RowStatus,MacAddress,DateAndTime FROM SNMPv2-TC
DisplayString, PhysAddress FROM RFC1213-MIB
switch FROM QUANTA-SWITCH-MIB;
dot1xAdvanced MODULE-IDENTITY
LAST-UPDATED "201108310000Z" -- 26 January 2011 12:00:00 GMT
ORGANIZATION "Quanta Computer Inc."
CONTACT-INFO
" Customer Support
Postal: Quanta Computer Inc.
4, Wen Ming 1 St., Kuei Shan Hsiang,
Tao Yuan Shien, Taiwan, R.O.C.
Tel: +886 3 328 0050
E-Mail: support@quantatw.com"
DESCRIPTION
"The Private MIB for Dot1x Advanced Features "
::= { switch 36 }
Dot1xPortControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The control values of the Authenticator PAE controlled
Port."
SYNTAX INTEGER {
forceUnauthorized(1),
auto(2),
forceAuthorized(3),
macBased(4)
}
Dot1xSessionTerminationAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The action to be taken on session termination ."
SYNTAX INTEGER {
default(1),
reauthenticate(2)
}
--**************************************************************************************
-- agentGuestVlanConfigGroup -> Contains MIB objects displaying Guest VLAN and
-- associated Functionality
--
--**************************************************************************************
agentGuestVlanConfigGroup OBJECT IDENTIFIER ::= { dot1xAdvanced 1 }
agentGuestVlanSupplMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mode showing whether at the global level,Guest VLAN Supplicant Mode is
enabled or not."
DEFVAL { disable }
::= { agentGuestVlanConfigGroup 1 }
--------------------------------------------------------------
-- The PAE Port Table
--------------------------------------------------------------
agentDot1xGuestVlanPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDot1xGuestVlanPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for Guest Vlan and associated functionality."
::= { agentGuestVlanConfigGroup 2 }
agentDot1xGuestVlanPortConfigEntry OBJECT-TYPE
SYNTAX AgentDot1xGuestVlanPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents entry for guest config table."
INDEX { dot1xPaePortNumber }
::= { agentDot1xGuestVlanPortConfigTable 1 }
AgentDot1xGuestVlanPortConfigEntry ::= SEQUENCE {
agentDot1xGuestVlanId
Unsigned32,
agentDot1xGuestVlanPeriod
Unsigned32
}
agentDot1xGuestVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
DEFVAL {0}
::= { agentDot1xGuestVlanPortConfigEntry 1}
agentDot1xGuestVlanPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the guestVlanPeriod constant
currently in use for Guest Vlan Assignment for the
interface ."
DEFVAL { 90 }
::= { agentDot1xGuestVlanPortConfigEntry 2 }
agentDot1xEnhancementConfigGroup OBJECT IDENTIFIER ::= { dot1xAdvanced 2 }
agentDot1xRadiusVlanAssignment OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable dot1x Vlan Assignment Support on the switch."
DEFVAL { disable }
::= { agentDot1xEnhancementConfigGroup 1 }
agentDot1xDynamicVlanCreationMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable dot1x dynamic vlan creation Support on the switch."
DEFVAL { disable }
::= { agentDot1xEnhancementConfigGroup 2 }
--------------------------------------------------------------
-- The client Table
--------------------------------------------------------------
agentDot1xClientGroup OBJECT IDENTIFIER ::= { dot1xAdvanced 3 }
agentDot1xClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDot1xClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for Guest Vlan and associated functionality."
::= { agentDot1xClientGroup 1 }
agentDot1xClientEntry OBJECT-TYPE
SYNTAX AgentDot1xClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents entry for guest config table."
INDEX { agentDot1xClientLogicalInterface }
::= { agentDot1xClientTable 1 }
AgentDot1xClientEntry ::= SEQUENCE {
agentDot1xClientLogicalInterface
Unsigned32,
agentDot1xClientInterface
DisplayString,
agentDot1xClientUsername
DisplayString,
agentDot1xClientMacAddress
PhysAddress,
agentDot1xClientSessionTime
Unsigned32,
agentDot1xClientVlanId
Unsigned32,
agentDot1xClientVlanAssigned
INTEGER,
agentDot1xClientSessionTimeout
Unsigned32,
agentDot1xClientSessionTerminationAction
INTEGER
}
agentDot1xClientLogicalInterface OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 1}
agentDot1xClientInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 2}
agentDot1xClientUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 3}
agentDot1xClientMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 4}
agentDot1xClientSessionTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 5}
agentDot1xClientVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 6}
agentDot1xClientVlanAssigned OBJECT-TYPE
SYNTAX INTEGER {
default(1),
radius(2),
unauthenticated(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 7}
agentDot1xClientSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 8}
agentDot1xClientSessionTerminationAction OBJECT-TYPE
SYNTAX INTEGER {
default(1),
radius(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface."
::= { agentDot1xClientEntry 9}
END