Observium_CE/mibs/paradyne/PDN-DEVICE-TIME-MIB

111 lines
3.6 KiB
Plaintext

PDN-DEVICE-TIME-MIB DEFINITIONS ::= BEGIN
-- Last Updated: 6/3/02
-- Enterprise Time MIB
-- Copyright (C) 1999-2002 Paradyne Corporation.
-- Created by : Prakash Easwar
-- REVISION HISTORY:
-- Date of Chg Revision (Most Recent First) By
--
-- 06/03/02 Removed unneeded devNTPIf object. alfano
-- 05/07/02 Added new objects for SNTP support. Changed/corrected alfano
-- existing object descriptions to reflect SNTP support.
--
IMPORTS
IpAddress
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DateAndTime
FROM SNMPv2-TC
NTPMode
FROM PDN-TC
pdn-time
FROM PDN-HEADER-MIB
;
devTimeMIBObjects OBJECT IDENTIFIER ::= { pdn-time 1 }
devTimeMIBTraps OBJECT IDENTIFIER ::= { pdn-time 2 }
devTimeAndDate OBJECT IDENTIFIER ::= { devTimeMIBObjects 1 }
devNTP OBJECT IDENTIFIER ::= { devTimeMIBObjects 2 }
-- Time And Date Group
devDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object displays the date and time on the entity.
It allows an NMS to set the date and time in the appropriate
timezone."
::= { devTimeAndDate 1 }
-- [S]NTP ([Simple] Network Time Protocol) group
devNTPServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the NTP/SNTP server."
::= { devNTP 1 }
devNTPMode OBJECT-TYPE
SYNTAX NTPMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows an NMS to configure the mode in which NTP/SNTP
will operate. In unicast(1) mode, NTP/SNTP polls the server
specified via the devNTPServerIP object. In broadcast(2) mode,
NTP/SNTP polls by broadcasting a request so that any NTP/SNTP
server could respond. Alternatively, in broadcast(2) mode, the
client only listens for messages broadcasted by any server. In
multicast(3) mode, the client listens for messages from any server
sent to the multicast group defined for NTP/SNTP (224.0.1.1).
Default value is broadcast(2)."
::= { devNTP 2 }
devNTPSynchronised OBJECT-TYPE
SYNTAX INTEGER (1 .. 24)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows an NMS to configure the poll interval (hours)
for the NTP/SNTP client to use to send requests to an NTP/SNTP
server to synchronize the local clock for the device.
Default value is 1 hour."
::= { devNTP 3 }
devNTPEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether or not the local clock is synchronized
via NTP/SNTP. When set to enabled(1), NTP/SNTP is operational
and will attempt to synchronize the local clock based on the
message(s) received from an NTP/SNTP server.
Default value is enabled(1)."
::= { devNTP 4 }
devNTPOffsetFromUTC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Offset (minutes) from the coordinated universal time (UTC), also
known as Greenwich mean time (GMT), to local time represented as a
signed integer. The sign of the integer denotes the direction of local
time from UTC (e.g., offsets for local times west of the zero meridian
to the international date line are negative).
Default value is 0 (i.e., at UTC)."
::= { devNTP 5 }
END