WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/paradyne/PDN-ATMM4EXT-MIB

787 lines
26 KiB
Plaintext
Raw Permalink Blame History

-- ===============================================================
-- Copyright (C) 2000 Paradyne Corporation.
-- ATM M4 Extension Group
PDN-ATMM4EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY , OBJECT-TYPE, OBJECT-IDENTITY,
Gauge32, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
pdnAtm
FROM PDN-HEADER-MIB
atmfM4VpTestEntry, atmfM4VcTestEntry, atmfM4TcProtoCurrEntry, atmfM4TcProtoHistEntry
FROM ATM-FORUM-SNMP-M4-MIB
ifIndex
FROM IF-MIB;
-- ===============================================================
--
-- Extentions to the ATM Forum M4 Mib
--
-- ===============================================================
pdnAtmfM4ExtMIB MODULE-IDENTITY
LAST-UPDATED "200103080000Z"
ORGANIZATION "Paradyne Corporation
MIB Working Group"
CONTACT-INFO
"Paradyne Corporation
8545 126th Avenue North
Largo, FL 33773
www.paradyne.com
General Comments to: mibwg_team@eng.paradyne.com"
DESCRIPTION
"This MIB Module extends the ATM-FORUM-SNMP-M4-MI defined
in the Atm Forums M4 Mib
"
REVISION "200208150000Z"
DESCRIPTION "P. Easwar
o Added New Table pdnAtmfM4VpLoopbackTestTable.
"
REVISION "200103080000Z"
DESCRIPTION "R.A.Bowhall
o Added error code of adminStatusDisabled(8).
"
REVISION "200009260000Z"
DESCRIPTION "R. Steinberger
o Added size to pdnAtmfM4Vc1CellLoopReportedLocation.
"
REVISION "200009220000Z"
DESCRIPTION "R. Steinberger
o Added error code of testTimeOut(7).
o Added description of use of pdnAtmfM4Vc1CellLoopTable
o Changed pdnAtmfM4Vc1CellLoopReportedLocation type to
meet actual M4 definition of OCTET STRING(SIZE(16))
o Added the pdnAtmfM4LoopbackLocationTable
"
REVISION "200009210000Z"
DESCRIPTION "J.Strain
o Added E2E and SEG as Multiple OAM Cell Tests
o documented mapping of atmfM4VcTestType to the corresponding
atmfM4VcTestCode results table
"
REVISION "200009080000Z"
DESCRIPTION "R. Steinberger
o Cleaned tabs throughout document.
o Fixed naming convention.
o Added pdnAtmfM4Vc1CellLoopTable for ATM OAM loopbacks
that send only single test cell.
o Added conformance section.
"
REVISION "200006290000Z"
DESCRIPTION "Z. Pan
o added augmented atmfM4VcTestTable for ATM OAM loopback test.
"
::= { pdnAtm 6 }
pdnAtmfM4ExtObjects OBJECT IDENTIFIER ::= { pdnAtmfM4ExtMIB 1 }
pdnAtmfM4ExtTraps OBJECT IDENTIFIER ::= { pdnAtmfM4ExtMIB 2 }
pdnAtmfM4ExtConformance OBJECT IDENTIFIER ::= { pdnAtmfM4ExtMIB 3 }
pdnAtmfM4ExtTrapPrefix OBJECT IDENTIFIER ::= { pdnAtmfM4ExtTraps 0 }
--
-- Textual Conventions Specific to this MIB Module
--
PdnAtmfM4TestErrorCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The specific error codes related to attempting to run a test. The
codes have the following meanings:
noError(0) -- No Error Occurred
badIfIndex(1) -- Specified interface does not exist
noVccFound(2) -- The Vcc does not exist on the interface
notOwner(3) -- Not the current owner of the test
noResourceAvailable(4) -- Device memory allocation failure
noLoopbackAllocated(5) -- Could not start the test
testCompleted(6) -- Test completed or stopped normally
testTimeOut(7) -- Test unsuccessfully due to timeout
adminStatusDisabled(8) -- ifAdminStatus is Disabled
"
SYNTAX INTEGER {
noError(0),
badIfIndex(1),
noVccFound(2),
notOwner(3),
noResourceAvailable(4),
noLoopbackAllocated(5),
testCompleted(6),
testTimeOut(7),
adminStatusDisabled(8)
}
--
-- ATM TC layer current and historical fifteen-minute interval statistics
-- pdnAtmfM4TcProtoCurrExtTable and pdnAtmfM4TcProtoHistExtTable
--
-- ATM TC layer current fifteen-minute interval data statistics
pdnAtmfM4TcProtoCurrExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PdnAtmfM4TcProtoCurrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Paradyne Extension to the atmfM4TcProtoCurrTable of the
ATM-FORUM-SNMP-M4-MIB."
::= { pdnAtmfM4ExtObjects 1 }
pdnAtmfM4TcProtoCurrExtEntry OBJECT-TYPE
SYNTAX PdnAtmfM4TcProtoCurrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Paradyne Extension to the atmfM4TcProtoCurrTable of the
ATM-FORUM-SNMP-M4-MIB."
AUGMENTS { atmfM4TcProtoCurrEntry }
::= { pdnAtmfM4TcProtoCurrExtTable 1 }
PdnAtmfM4TcProtoCurrExtEntry ::= SEQUENCE {
pdnAtmfM4TcProtoCurrCellIns Gauge32,
pdnAtmfM4TcProtoCurrCellOuts Gauge32,
pdnAtmfM4TcProtoCurrInDiscards Gauge32,
pdnAtmfM4TcProtoCurrOutDiscards Gauge32,
pdnAtmfM4TcProtoCurrLCDEvents Gauge32,
pdnAtmfM4TcProtoCurrUnknownCells Gauge32,
pdnAtmfM4TcProtoCurrCorrectedHEC Gauge32
}
pdnAtmfM4TcProtoCurrCellIns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells received on this interface since the
start of this interval"
::= { pdnAtmfM4TcProtoCurrExtEntry 1 }
pdnAtmfM4TcProtoCurrCellOuts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells sent on this interface since the
start of this interval"
::= { pdnAtmfM4TcProtoCurrExtEntry 2 }
pdnAtmfM4TcProtoCurrInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RX ATM cells dropped on this interface since the
start of this interval"
::= { pdnAtmfM4TcProtoCurrExtEntry 3 }
pdnAtmfM4TcProtoCurrOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TX ATM cells dropped on this interface since the
start of this interval"
::= { pdnAtmfM4TcProtoCurrExtEntry 4 }
pdnAtmfM4TcProtoCurrLCDEvents OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Loss of Cell Delineation (LCD) event occurred
on this interface since the start of this interval"
::= { pdnAtmfM4TcProtoCurrExtEntry 5 }
pdnAtmfM4TcProtoCurrUnknownCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown Cells received on this interface since
the start of this interval"
::= { pdnAtmfM4TcProtoCurrExtEntry 6 }
pdnAtmfM4TcProtoCurrCorrectedHEC OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Cell with corrected HEC received on this interface
since the start of this interval"
::= { pdnAtmfM4TcProtoCurrExtEntry 7 }
--
-- ATM TC layer historical fifteen-minute interval statistics
-- (per interface and time interval)
--
pdnAtmfM4TcProtoHistExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PdnAtmfM4TcProtoHistExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Paradyne Extension to the atmfM4TcProtoHistTable of the
ATM-FORUM-SNMP-M4-MIB."
::= { pdnAtmfM4ExtObjects 2 }
pdnAtmfM4TcProtoHistExtEntry OBJECT-TYPE
SYNTAX PdnAtmfM4TcProtoHistExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Paradyne Extension to the atmfM4TcProtoHistTable of the
ATM-FORUM-SNMP-M4-MIB."
AUGMENTS { atmfM4TcProtoHistEntry }
::= { pdnAtmfM4TcProtoHistExtTable 1 }
PdnAtmfM4TcProtoHistExtEntry ::= SEQUENCE {
pdnAtmfM4TcProtoHistCellIns Gauge32,
pdnAtmfM4TcProtoHistCellOuts Gauge32,
pdnAtmfM4TcProtoHistInDiscards Gauge32,
pdnAtmfM4TcProtoHistOutDiscards Gauge32,
pdnAtmfM4TcProtoHistLCDEvents Gauge32,
pdnAtmfM4TcProtoHistUnknownCells Gauge32,
pdnAtmfM4TcProtoHistCorrectedHEC Gauge32
}
pdnAtmfM4TcProtoHistCellIns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells received on this interface
during this interval"
::= { pdnAtmfM4TcProtoHistExtEntry 1 }
pdnAtmfM4TcProtoHistCellOuts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells sent on this interface during
this interval"
::= { pdnAtmfM4TcProtoHistExtEntry 2 }
pdnAtmfM4TcProtoHistInDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RX ATM cells dropped on this interface
during this interval"
::= { pdnAtmfM4TcProtoHistExtEntry 3 }
pdnAtmfM4TcProtoHistOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TX ATM cells dropped on this interface
during this interval"
::= { pdnAtmfM4TcProtoHistExtEntry 4 }
pdnAtmfM4TcProtoHistLCDEvents OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Loss of Cell Delineation (LCD) event occurred
on this interface during this interval"
::= { pdnAtmfM4TcProtoHistExtEntry 5 }
pdnAtmfM4TcProtoHistUnknownCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown Cells received on this interface since
the start of this interval"
::= { pdnAtmfM4TcProtoHistExtEntry 6 }
pdnAtmfM4TcProtoHistCorrectedHEC OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Cell with corrected HEC received on this interface
during this interval"
::= { pdnAtmfM4TcProtoHistExtEntry 7 }
--
-- The following object defines a group of OAM test types.
-- This group is to contain any Paradyne Specific OAM test
--
pdnAtmfM4TestTypes OBJECT IDENTIFIER ::= { pdnAtmfM4ExtObjects 3 }
--
-- The following OID is defined to initiate continuous Segment OAM Cells
--
pdnAtmfM4TestOAMLoopbackSegMultiCell OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using a segment OAM
cell.
The test type must have appended to it a code that uniquely
identifies an intermediate point responsible for looping
back the cell. If this is absent, the loopback is performed
at the end of the segment or connection.
E.g., the OID { pdnAtmfM4TestOAMLoopbackSegMultiCell 5 } identifies
that the loopback should be performed at the intermediate
point labeled 5."
::= { pdnAtmfM4TestTypes 1 }
--
-- The following OID is defined to initiate continuous End to End OAM cells
--
pdnAtmfM4TestOAMLoopbackE2EMultiCell OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using an end-to-end OAM
cell."
::= { pdnAtmfM4TestTypes 2 }
--
-- Test Code to Test Results Matrix
--
-- atmfM4VcTestType atmfM4VcTestCode Result Table
-- ________________ _____________________________
--
-- atmfM4TestOAMLoopbackSeg(standard is a single cell test)
-- pdnAtmfM4Vc1CellLoopTable
-- atmfM4TestOAMLoopbackE2E(standard is a single cell test)
-- pdnAtmfM4Vc1CellLoopTable
--
-- pdnAtmfM4TestOAMLoopbackSegMultiCell
-- pdnAtmfM4VcLoopbackTestTable
-- pdnAtmfM4TestOAMLoopbackE2EMultiCell
-- pdnAtmfM4VcLoopbackTestTable
--
--
-- OAM Loopback test (multiple cell) detailed results table
--
pdnAtmfM4VcLoopbackTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF PdnAtmfM4VcLoopbackTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains input and results for OAM loopback
tests. There can be only one test running per ATM VCC
This table should be used in conjunction with atmfM4VcTestTable
with all the semantics of atmfM4VcTestTable."
::= { pdnAtmfM4ExtObjects 4 }
pdnAtmfM4VcLoopbackTestEntry OBJECT-TYPE
SYNTAX PdnAtmfM4VcLoopbackTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for test results
for ATM OAM loopback test"
AUGMENTS { atmfM4VcTestEntry }
::= { pdnAtmfM4VcLoopbackTestTable 1 }
PdnAtmfM4VcLoopbackTestEntry ::=
SEQUENCE {
pdnAtmfM4VcLoopbackTestElpsTime TimeTicks,
pdnAtmfM4VcLoopbackTestCellsSent Gauge32,
pdnAtmfM4VcLoopbackTestCellsRcvd Gauge32,
pdnAtmfM4VcLoopbackTestMinRTDelay Gauge32,
pdnAtmfM4VcLoopbackTestMaxRTDelay Gauge32,
pdnAtmfM4VcLoopbackTestAvgRTDelay Gauge32,
pdnAtmfM4VcLoopbackTestErrorCode PdnAtmfM4TestErrorCode
}
pdnAtmfM4VcLoopbackTestElpsTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the time that has elapsed since the test started."
::= { pdnAtmfM4VcLoopbackTestEntry 1 }
pdnAtmfM4VcLoopbackTestCellsSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a count of the number of test cells that
have been sent. The value of this object stops increasing
when it reaches its maximum value."
::= { pdnAtmfM4VcLoopbackTestEntry 2 }
pdnAtmfM4VcLoopbackTestCellsRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a count of the number of test cells that
have been received. The value of this object stops increasing
when it reaches its maximum value."
::= { pdnAtmfM4VcLoopbackTestEntry 3 }
pdnAtmfM4VcLoopbackTestMinRTDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the shortest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted."
::= { pdnAtmfM4VcLoopbackTestEntry 4 }
pdnAtmfM4VcLoopbackTestMaxRTDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the longest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted."
::= { pdnAtmfM4VcLoopbackTestEntry 5 }
pdnAtmfM4VcLoopbackTestAvgRTDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the average round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted."
::= { pdnAtmfM4VcLoopbackTestEntry 6 }
pdnAtmfM4VcLoopbackTestErrorCode OBJECT-TYPE
SYNTAX PdnAtmfM4TestErrorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the specific error code on the test result."
::= { pdnAtmfM4VcLoopbackTestEntry 7 }
--
-- Single Cell OAM Loopback test detailed results
--
-- This table contains results for single cell OAM tests that are not
-- of a broadcast variety.
--
-- Recommended Use:
--
-- 1) The NMS will start a test using the M4 MIB's atmfM4VcTestTable.
-- 2) Upon starting the test, the agent will put the corresponding OID
-- of a row in this table into the atmfM4VcTestCode object.
-- 3) When the value of atmfM4VcTestResult is not equal to inProgress(3),
-- the values contained in this table should be read.
--
pdnAtmfM4Vc1CellLoopTable OBJECT-TYPE
SYNTAX SEQUENCE OF PdnAtmfM4Vc1CellLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains input and results for single cell OAM
loopback tests. There can be only one test running per ATM VCC
This table should be used in conjunction with atmfM4VcTestTable
with all the semantics of atmfM4VcTestTable."
::= { pdnAtmfM4ExtObjects 5 }
pdnAtmfM4Vc1CellLoopEntry OBJECT-TYPE
SYNTAX PdnAtmfM4Vc1CellLoopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for test results
for a single cell ATM OAM loopback test"
AUGMENTS { atmfM4VcTestEntry }
::= { pdnAtmfM4Vc1CellLoopTable 1 }
PdnAtmfM4Vc1CellLoopEntry ::=
SEQUENCE {
pdnAtmfM4Vc1CellLoopRTDelay Gauge32,
pdnAtmfM4Vc1CellLoopReportedLocation OCTET STRING,
pdnAtmfM4Vc1CellLoopErrorCode PdnAtmfM4TestErrorCode
}
pdnAtmfM4Vc1CellLoopRTDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the round trip delay of the
the test cell. A value of zero indicates that no cell has been
received."
::= { pdnAtmfM4Vc1CellLoopEntry 1 }
pdnAtmfM4Vc1CellLoopReportedLocation OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the location identifier
reported by the received cell."
::= { pdnAtmfM4Vc1CellLoopEntry 2 }
pdnAtmfM4Vc1CellLoopErrorCode OBJECT-TYPE
SYNTAX PdnAtmfM4TestErrorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the specific error code on the test result."
::= { pdnAtmfM4Vc1CellLoopEntry 3 }
--
-- OAM Segment Loopback Location Code
--
pdnAtmfM4LoopbackLocationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PdnAtmfM4LoopbackLocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the ATM OAM loopback location codes
for ATM cell layer interfaces."
::= { pdnAtmfM4ExtObjects 6 }
pdnAtmfM4LoopbackLocationEntry OBJECT-TYPE
SYNTAX PdnAtmfM4LoopbackLocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for ATM OAM loopback locations."
INDEX { ifIndex }
::= { pdnAtmfM4LoopbackLocationTable 1 }
PdnAtmfM4LoopbackLocationEntry ::=
SEQUENCE {
pdnAtmfM4LoopbackLocationCode OCTET STRING
}
pdnAtmfM4LoopbackLocationCode OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the value of ATM OAM Loopback Location Code"
::= { pdnAtmfM4LoopbackLocationEntry 1 }
pdnAtmfM4VpLoopbackTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF PdnAtmfM4VpLoopbackTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains input and results for OAM loopback
tests. There can be only one test running per ATM VPC
This table should be used in conjunction with atmfM4VpTestTable
with all the semantics of atmfM4VpTestTable."
::= { pdnAtmfM4ExtObjects 7 }
pdnAtmfM4VpLoopbackTestEntry OBJECT-TYPE
SYNTAX PdnAtmfM4VpLoopbackTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for test results
for ATM OAM loopback test"
AUGMENTS { atmfM4VpTestEntry }
::= { pdnAtmfM4VpLoopbackTestTable 1 }
PdnAtmfM4VpLoopbackTestEntry ::=
SEQUENCE {
pdnAtmfM4VpLoopbackTestElpsTime TimeTicks,
pdnAtmfM4VpLoopbackTestCellsSent Gauge32,
pdnAtmfM4VpLoopbackTestCellsRcvd Gauge32,
pdnAtmfM4VpLoopbackTestMinRTDelay Gauge32,
pdnAtmfM4VpLoopbackTestMaxRTDelay Gauge32,
pdnAtmfM4VpLoopbackTestAvgRTDelay Gauge32,
pdnAtmfM4VpLoopbackTestErrorCode PdnAtmfM4TestErrorCode
}
pdnAtmfM4VpLoopbackTestElpsTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the time that has elapsed since the test started."
::= { pdnAtmfM4VpLoopbackTestEntry 1 }
pdnAtmfM4VpLoopbackTestCellsSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a count of the number of test cells that
have been sent. The value of this object stops increasing
when it reaches its maximum value."
::= { pdnAtmfM4VpLoopbackTestEntry 2 }
pdnAtmfM4VpLoopbackTestCellsRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a count of the number of test cells that
have been received. The value of this object stops increasing
when it reaches its maximum value."
::= { pdnAtmfM4VpLoopbackTestEntry 3 }
pdnAtmfM4VpLoopbackTestMinRTDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the shortest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted."
::= { pdnAtmfM4VpLoopbackTestEntry 4 }
pdnAtmfM4VpLoopbackTestMaxRTDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the longest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted."
::= { pdnAtmfM4VpLoopbackTestEntry 5 }
pdnAtmfM4VpLoopbackTestAvgRTDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the average round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted."
::= { pdnAtmfM4VpLoopbackTestEntry 6 }
pdnAtmfM4VpLoopbackTestErrorCode OBJECT-TYPE
SYNTAX PdnAtmfM4TestErrorCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the specific error code on the test result."
::= { pdnAtmfM4VpLoopbackTestEntry 7 }
-- Conformance Information
pdnAtmfM4Groups OBJECT IDENTIFIER ::= { pdnAtmfM4ExtConformance 1 }
pdnAtmfM4Compliances OBJECT IDENTIFIER ::= { pdnAtmfM4ExtConformance 2 }
pdnAtmfM4Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which support
the ATM M4 extensions."
MODULE
GROUP pdnAtmfM4LoopbackLocationGroup
DESCRIPTION
"The conditional objects in the Loopback Location Group."
OBJECT pdnAtmfM4LoopbackLocationCode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required"
::= { pdnAtmfM4Compliances 1 }
--
-- Units of Conformance
--
pdnAtmfM4TcCurrGroup OBJECT-GROUP
OBJECTS {
pdnAtmfM4TcProtoCurrCellIns,
pdnAtmfM4TcProtoCurrCellOuts,
pdnAtmfM4TcProtoCurrInDiscards,
pdnAtmfM4TcProtoCurrOutDiscards,
pdnAtmfM4TcProtoCurrLCDEvents,
pdnAtmfM4TcProtoCurrUnknownCells,
pdnAtmfM4TcProtoCurrCorrectedHEC
}
STATUS current
DESCRIPTION
"The objects in the ATM TC layer current table."
::= { pdnAtmfM4Groups 1 }
pdnAtmfM4TcHistGroup OBJECT-GROUP
OBJECTS {
pdnAtmfM4TcProtoHistCellIns,
pdnAtmfM4TcProtoHistCellOuts,
pdnAtmfM4TcProtoHistInDiscards,
pdnAtmfM4TcProtoHistOutDiscards,
pdnAtmfM4TcProtoHistLCDEvents,
pdnAtmfM4TcProtoHistUnknownCells,
pdnAtmfM4TcProtoHistCorrectedHEC
}
STATUS current
DESCRIPTION
"The objects in the ATM TC layer history table."
::= { pdnAtmfM4Groups 2 }
pdnAtmfM4VcLoopbackTestGroup OBJECT-GROUP
OBJECTS {
pdnAtmfM4VcLoopbackTestElpsTime,
pdnAtmfM4VcLoopbackTestCellsSent,
pdnAtmfM4VcLoopbackTestCellsRcvd,
pdnAtmfM4VcLoopbackTestMinRTDelay,
pdnAtmfM4VcLoopbackTestMaxRTDelay,
pdnAtmfM4VcLoopbackTestAvgRTDelay,
pdnAtmfM4VcLoopbackTestErrorCode
}
STATUS current
DESCRIPTION
"The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VCC."
::= { pdnAtmfM4Groups 3 }
pdnAtmfM4Vc1CellLoopGroup OBJECT-GROUP
OBJECTS {
pdnAtmfM4Vc1CellLoopRTDelay,
pdnAtmfM4Vc1CellLoopReportedLocation,
pdnAtmfM4Vc1CellLoopErrorCode
}
STATUS current
DESCRIPTION
"The objects in the ATM Single Cell OAM Loopback Test table."
::= { pdnAtmfM4Groups 4 }
pdnAtmfM4LoopbackLocationGroup OBJECT-GROUP
OBJECTS {
pdnAtmfM4LoopbackLocationCode
}
STATUS current
DESCRIPTION
"The objects in the ATM Loopback Location table."
::= { pdnAtmfM4Groups 5 }
pdnAtmfM4VpLoopbackTestGroup OBJECT-GROUP
OBJECTS {
pdnAtmfM4VpLoopbackTestElpsTime,
pdnAtmfM4VpLoopbackTestCellsSent,
pdnAtmfM4VpLoopbackTestCellsRcvd,
pdnAtmfM4VpLoopbackTestMinRTDelay,
pdnAtmfM4VpLoopbackTestMaxRTDelay,
pdnAtmfM4VpLoopbackTestAvgRTDelay,
pdnAtmfM4VpLoopbackTestErrorCode
}
STATUS current
DESCRIPTION
"The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VPC."
::= { pdnAtmfM4Groups 6 }
END
View Git Blame Copy Permalink