WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/paradyne/HOTWIRE-XDSL-INTERFACE-MIB

1988 lines
60 KiB
Plaintext
Raw Permalink Blame History

HOTWIRE-XDSL-INTERFACE-MIB DEFINITIONS ::= BEGIN
-- Version : 1.7
-- Last Updated : 01/11/00 Rajesh Gowda (IDSL changes to Atl3.1/4.0)
-- Last Updated : 10/20/99 Wayne Jadoo (use the PDN-HEADER-MIB)
-- Last Updated : 04/21/99 Rajesh Gowda (GSI 3.2 CAP, Atlantis Rel 2.1)
-- Last Updated : 01/04/99 Rajesh Gowda (For Atlantis Rel 2.0)
-- Last Updated : 11/10/98 Rajesh Gowda (For Atlantis Rel 2.0)
-- Last Updated : 8/13/98 Rajesh Gowda (For Atlantis Rel 1.1)
-- Last Updated : 6/02/98 Wayne Jadoo ( For Sumatra 2.3)
-- Last Updated : 3/16/98 J.Strain ( for SN traps )
-- Last Updated : 3/12/98 Rajesh Gowda (For CAP changes and MVL Rel 1.0)
-- Last Updated : 02/03/98 Sachin Kamat (For Atlantis Release 1)
-- Last Updated : 11/18/97 Gerard Lowry (For Sumatra/Midway Release 2)
-- Last Updated : 11/7/97 Gene Zhu (For Sumatra/Midway Release 2)
-- Last Updated : 8/25/97 Sachin Kamat (For Sumatra)
-- Last Updated : 7/14/97 Prakash Easwar (For Sumatra)
-- Last Updated : 7/9/97 Perry Wintner (For Midway)
-- Last Updated : 5/5/97 Prakash Easwar (For Tonga)
-- Updated By : 7/22/96 Gerard Lowry (For Bora-Bora)
-- Created by: Dave Arneson
-- Manu Kaycee
IMPORTS
Counter, TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
ifIndex
FROM RFC1213-MIB
xdsl
FROM PDN-HEADER-MIB
pdnPortConfigVNID
FROM HOT-DOMAIN-MIB;
-- The Paradyne enterprise xDSL MIB. This MIB is written
-- specifically to facilitate in the management of the
-- xDSL interface on the device
-- as long as a standard MIB for managing
-- xDSL interfaces is not available.
-- History
-- 9/3/96
-- 1. Changed the trap numbers so that they are unique
-- across all the hotwire MIBS.
-- 2. Changed the position of xdslDevice under the xdsl
-- sub-tree.
-- 10/6/96
-- 1. Changed the enum values for the
-- xdslDevIfConfigReedSolomonDownForwardErrorCorrection object
-- because the interpretation of this object has changed.
-- 2. Made minor corrections to objects for compilation purposes.
-- 3. Changed top-level oids to represent the "New Paradyne"
-- 10/28/96
-- 1. Changed the Syntax for the Objects
-- xdslDevIfStatsCentralRecErrorRate
-- xdslDevIfStatsCentralRecErrorRate
-- to OCTET STRING. This is because the
-- value represented by these objects are floating point
-- numbers
-- 2. changed the enterprise for traps to the MIB OID in which they
-- are defined. This was decided in a MWG meeting
-- 11/4/96
-- 1. Replaced "OCTET STRING" with DisplayString as all the objects
-- with the OCTET STRING syntax are printable.
-- 11/11/96
-- 1. Added SIZE to Object xdslDevIfConfigPortID (40 characters)
-- 2. Changed the name of xdslDevIfConfigEstimatedErrorRateThreshold
-- to xdslDevIfConfigEstimatedHrErrRateThreshold
-- 3. added a new object
-- xdslDevIfConfigEstimatedDayErrRateThreshold
-- 12/13/96
-- 1. Changed the description for the following objects
-- xdslDevIfStatsCentralRecErrorRate
-- xdslDevIfStatsRemoteRecErrorRate
-- 1/7/97
-- 1. Changed the definition of the following
-- xdslDevIfStatsInterval
-- 1/31/97
-- 1. Changed the description of the following objects
-- xdslDevIfConfigPortSpeedBehaviour OBJECT-TYPE
-- xdslDevIfConfigUpFixedPortSpeed
-- xdslDevIfConfigDownFixedPortSpeed
-- xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed
-- xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed
-- xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed
-- xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed
-- xdslDevIfLinkUpDownTransitionThreshold
-- xdslDevIfConfigEstimatedDayErrRateThreshold
-- xdslDevIfConfigEstimatedHrErrRateThreshold
-- xdslDevIfConfigMarginThreshold
-- 2. Added a new object
-- xdslDevIfConfigStartUpMargin
-- 5/5/97
-- 1. Changed the description of the following objects
-- xdslDevIfConfigMarginThreshold
-- xdslDevIfConfigEstimatedHrErrRateThreshold
-- xdslDevIfConfigEstimatedDayErrRateThreshold
-- xdslDevIfLinkUpDownTransitionThreshold
-- xdslDevIfConfigStartUpMargin
-- 6/5/97
-- 1. Added the following objects to the XdslDevIfIntervalStatsEntry
-- for Midway
-- xdslDevIfStatsRemoteRecErroredMinutes
-- xdslDevIfStatsRemoteRecSeverelyErroredMinutes
-- xdslDevIfStatsCentralRecErroredMinutes
-- xdslDevIfStatsCentralRecSeverelyErroredMinutes
--
-- 6/26/97
-- 1. Added the following objects to the XdslDevIfIntervalStatsEntry
-- for Midway
-- xdslDevIfStatsCentralReceivedOctets
-- xdslDevIfStatsCentralTransmittedOctets
-- 2. Added the xdslRemoteSys group to the mib for Midway (endpoints
-- without their own SNMP agent)
-- 7/9/97
-- 1. Fixed description of XdslRemoteSys objects to refer to mib-2 system
-- MIB descriptions.
--
-- 7/13/97
-- 1. Appended to the description of the following object
-- xdslDevIfStatsUpStreamSpeed
--
-- 8/14/97
-- 1. Following objects have new enums and descriptions:
-- xdslDevIfConfigUpFixedPortSpeed
-- xdslDevIfConfigDownFixedPortSpeed
-- xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed
-- xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed
-- xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed
-- xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed
-- xdslDevIfConfigReedSolomonDownForwardErrorCorrection
-- 2. New object added to xdslDevIfConfigTable for :
-- xdslDevIfConfigTxPowerAttenuation
-- 3. New enum added to following object:
-- xdslDevIfConfigReedSolomonDownForwardErrorCorrection
--
-- 8/25/97
-- 1. To add xdslRtuTypeMismatch and xdslRtuTypeMismatchClear
-- trap.
--
-- 11/7/97
-- 1. Added the following traps
-- xdslRtuCommunityNameDeleteFail
-- xdslRtuRemoteServiceDomainDeleteFail
-- xdslRtuTrapManagerDeleteFail
-- xdslRtuStaticRouteDeleteFail
-- xdslRtuCommunityNameInjectFail
-- xdslRtuRemoteServiceDomainInjectFail
-- xdslRtuTrapManagerInjectFail
-- xdslRtuStaticRouteInjectFail
--
--
-- 11/18/97
-- 1. Added group xdslRemoteDTEStatus for Donzi endpoint support
-- 2. Added the following trap
-- xdslRtuSelfTestFail
-- 2/3/98
-- 1. To add the Atlantis RTU Last Gasp Trap "xdslRtuLastGasp".
--
-- 03/12/98
-- 1. Added a new group xdslDevMvlIfConfig for Atlantis MVL Rel 1.0
-- 2. For CAP changes
-- a. Added new port speeds s1024, s896, s768, s512, s384, s256
-- to the following objects :
-- xdslDevIfConfigDownFixedPortSpeed
-- xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed
-- xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed
-- b. Changed the desc. of xdslDevIfConfigTxPowerAttenuation
-- c. Added new object xdslDevIfConfigSnTxPowerAttenuation
--
-- 03/16/98
-- 1. Added 3 new SN traps for Atlantis
--
-- 06/01/98
-- Added xdslEnhancedLinkUpTrap
-- Added RemoteSysCircuitId To the xdslRemoteSys Group
-- Added a new xdslLinkUpDownInformation Group
-- 06/01/98
-- 1. Added a new 'xdslDevNAPCustomerAccount' group for accounting
-- pure customer data only, i.e excluding LMC messages, test packets,
-- errors etc,. for Network Access providers. This table is indexed
-- by 2 indices, dsl port and interval(i.e current day and previous day)
--
-- 06/01/98
-- Changed enumerated data type from 'nonIntervalBased' to
-- 'previousDay' in xdslDevIfStatsTable. This enty will
-- have the statistics counted for previous 24 hours/calendar day,
-- staring at 12 midnight.
--
-- 8/14/98 - rgowda
-- Changed the description and object names of the following objects.
-- 1. xdslDevIfStatsCentralReceivedOctets
-- 2. xdslDevIfStatsCentralTransmittedOctets
-- 3. xdslDevIfStatsRemoteReceivedOctets
-- 4. xdslDevIfStatsRemoteTransmittedOctets
-- TO
-- 1. xdslDevIfStatsCentralReceivedKiloOctets
-- 2. xdslDevIfStatsCentralTransmittedKiloOctets
-- 3. xdslDevIfStatsRemoteReceivedKiloOctets
-- 4. xdslDevIfStatsRemoteTransmittedKiloOctets
--
-- Changed the description of the following objects.
-- 5. xdslDevNAPCustomerAccountRecKiloOctets
-- 6. xdslDevNAPCustomerAccountTrxKiloOctets
--
-- 11/10/98 rgowda
-- 1. Added following 2 SN traps for Atlantis 2.0
-- a. xdslRemoteInjectionFailureTrap
-- b. xdslRemoteInjectionIncompatibleTrap
--
-- 2. Deleted the following traps
-- xdslRtuCommunityNameDeleteFail
-- xdslRtuRemoteServiceDomainDeleteFail
-- xdslRtuTrapManagerDeleteFail
-- xdslRtuStaticRouteDeleteFail
-- xdslRtuCommunityNameInjectFail
-- xdslRtuRemoteServiceDomainInjectFail
-- xdslRtuTrapManagerInjectFail
-- xdslRtuStaticRouteInjectFail
--
-- 3. Added xdslRemoteInjection group
--
-- 01/04/99 rgowda
-- Changed the description and value range of the object
-- xdslDevIfConfigMarginThreshold
--
-- 04/21/99 rgowda
-- 1. Changed the description and value range of the object
-- xdslDevIfConfigTxPowerAttenuation
-- 2. Added two new objects into xdslDevMvlIfConfigTable
-- xdslDevMvlIfConfigOnHookTxPowerAttenuation
-- xdslDevMvlIfConfigOffHookTxPowerAttenuation
-- 3. More enumerations/port speeds into the objects
-- xdslDevIfConfigUpFixedPortSpeed
-- xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed
-- xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed
--
-- 10/20/99 Wayne Jadoo
-- Added Imports from PDN-HEADER-MIB and
-- added import for Timeticks.
--
-- 01/11/00 Rajesh Gowda
-- Added xdslDevIDSLConfig group
-- Added Trap xdslLossOfNetworkTimingSignalTrap
--
-- 04/27/00 Prakash Easwar
--
-- 1) added three new objects to
--
-- xdslDevIfIntervalStatsTable
--
-- xdslDevIfStatsCentralTransmittedPkts
-- xdslDevIfStatsCentralReceivedPkts
-- xdslDevIfStatsCentralErrPkts
--
-- 2) Deprecated objects
--
-- xdslRemoteInjectionType
--
-- 3) deprecated traps
-- xdslRemoteInjectionFailureTrap
-- xdslRemoteInjectionIncompatibleTrap
--
-- added new speeds (enums) to the following objects
--
-- xdslDevIfConfigUpFixedPortSpeed
-- xdslDevIfConfigDownFixedPortSpeed
-- END OF COMMENTS
xdslDevice OBJECT IDENTIFIER ::= { xdsl 1 }
-- textual conventions
DisplayString ::=
OCTET STRING
-- This data type is used to model textual information
-- taken from the NVT ASCII character set. By convention,
-- objects with this syntax are declared as having
-- SIZE (0..255)
-- All groups within the MIB are mandatory.
xdslDevIfStats OBJECT IDENTIFIER ::= { xdslDevice 1 }
xdslDevIfConfig OBJECT IDENTIFIER ::= { xdslDevice 2 }
xdslRemoteSys OBJECT IDENTIFIER ::= { xdslDevice 3 }
xdslRemoteDTEStatus OBJECT IDENTIFIER ::= { xdslDevice 4 }
xdslDevMvlIfConfig OBJECT IDENTIFIER ::= { xdslDevice 5 }
xdslDevNAPCustomerAccount OBJECT IDENTIFIER ::= { xdslDevice 6 }
xdslLinkUpDownInformation OBJECT IDENTIFIER ::= { xdslDevice 7 }
xdslRemoteInjection OBJECT IDENTIFIER ::= { xdslDevice 8 }
xdslDevIDSLConfig OBJECT IDENTIFIER ::= { xdslDevice 9 }
-- The xdslDevIfStats group. The implementation of this group is
-- mandatory.
xdslDevIfIntervalStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF XdslDevIfIntervalStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The xdslIfStatsTable provides statistics specific to the xDSL
link. Statistics are collected on a per port basis and
on specified intervals. Hence as such this table is
indexed by the xdslDevIfStatsIfIndex and
xdslDevIfStatsInterval. Also Statistics are grouped
into remote and central statistics. By 'remote' we mean the
statistics collected by the device at the customer premises
and by 'central' we mean the statistics collected by the
device located at the central office. The objects which
are not grouped into these two groups are related to both
ends of the xDSL link."
::= { xdslDevIfStats 1 }
xdslDevIfIntervalStatsEntry OBJECT-TYPE
SYNTAX XdslDevIfIntervalStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specific xDSL satistics entry."
INDEX { xdslDevIfStatsIfIndex,
xdslDevIfStatsInterval }
::= { xdslDevIfIntervalStatsTable 1 }
XdslDevIfIntervalStatsEntry ::=
SEQUENCE {
xdslDevIfStatsIfIndex
INTEGER,
xdslDevIfStatsInterval
INTEGER,
xdslDevIfStatsValid15MinuteIntervalCount
Counter,
xdslDevIfStatsElapsedTimeLinkUp
Counter,
xdslDevIfStatsLinkDownCount
Counter,
xdslDevIfStatsUpStreamSpeed
INTEGER,
xdslDevIfStatsCentralReceiverGain
INTEGER,
xdslDevIfStatsCentralRecMargin
INTEGER,
xdslDevIfStatsCentralRecAttenuationEstimate
INTEGER,
xdslDevIfStatsCentralRecTransmitPower
INTEGER,
xdslDevIfStatsCentralRecErrorRate
DisplayString (SIZE (1..32)),
xdslDevIfStatsCentralRecErroredSeconds
INTEGER,
xdslDevIfStatsCentralRecSeverelyErroredSeconds
INTEGER,
xdslDevIfStatsRemoteReceiverGain
INTEGER,
xdslDevIfStatsRemoteRecMargin
INTEGER,
xdslDevIfStatsRemoteRecAttenuationEstimate
INTEGER,
xdslDevIfStatsRemoteRecTransmitPower
INTEGER,
xdslDevIfStatsRemoteRecErrorRate
DisplayString (SIZE (1..32)),
xdslDevIfStatsRemoteRecErroredSeconds
INTEGER,
xdslDevIfStatsRemoteRecSeverelyErroredSeconds
INTEGER,
xdslDevIfStatsRemoteOctetsCorrected
Counter,
xdslDevIfStatsRemoteOctetsNotCorrected
Counter,
xdslDevIfStatsRemoteReceivedKiloOctets
Counter,
xdslDevIfStatsRemoteReceivedPkts
Counter,
xdslDevIfStatsRemoteRecErrPkts
Counter,
xdslDevIfStatsRemoteDroppedPkts
Counter,
xdslDevIfStatsRemoteTransmittedKiloOctets
Counter,
xdslDevIfStatsRemoteTransmittedPkts
Counter,
xdslDevIfStatsCentralRecErroredMinutes
INTEGER,
xdslDevIfStatsCentralRecSeverelyErroredMinutes
INTEGER,
xdslDevIfStatsRemoteRecErroredMinutes
INTEGER,
xdslDevIfStatsRemoteRecSeverelyErroredMinutes
INTEGER,
xdslDevIfStatsCentralReceivedKiloOctets
Counter,
xdslDevIfStatsCentralTransmittedKiloOctets
Counter,
xdslDevIfStatsCentralTransmittedPkts
Counter,
xdslDevIfStatsCentralReceivedPkts
Counter,
xdslDevIfStatsCentralErrPkts
Counter
}
xdslDevIfStatsIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object corresponds directly to each
DSL interface as described in ifTable."
::= { xdslDevIfIntervalStatsEntry 1 }
xdslDevIfStatsInterval OBJECT-TYPE
SYNTAX INTEGER {
first15MinuteSlice (1),
second15MinuteSlice (2),
third15MinuteSlice (3),
fourth15MinuteSlice (4),
currentHour (5),
current15Minutes (6),
hour1of24hrs (7),
hour2of24hrs (8),
hour3of24hrs (9),
hour4of24hrs (10),
hour5of24hrs (11),
hour6of24hrs (12),
hour7of24hrs (13),
hour8of24hrs (14),
hour9of24hrs (15),
hour10of24hrs (16),
hour11of24hrs (17),
hour12of24hrs (18),
hour13of24hrs (19),
hour14of24hrs (20),
hour15of24hrs (21),
hour16of24hrs (22),
hour17of24hrs (23),
hour18of24hrs (24),
hour19of24hrs (25),
hour20of24hrs (26),
hour21of24hrs (27),
hour22of24hrs (28),
hour23of24hrs (29),
hour24of24hrs (30),
current24Hours (31),
previousDay (32)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
interval of time during which statistics were
collected. previousDay(32) will have the statistics
collected from 12 midnight previous calendar day "
::= { xdslDevIfIntervalStatsEntry 2 }
xdslDevIfStatsValid15MinuteIntervalCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the number of 15 minute intervals
during which link was up and statistics were
received from the remote end"
::= { xdslDevIfIntervalStatsEntry 3 }
xdslDevIfStatsElapsedTimeLinkUp OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the elapsed time since the link was up."
::= { xdslDevIfIntervalStatsEntry 4 }
xdslDevIfStatsLinkDownCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the number of times that the xDSL link has gone to a
down state. This may be due to shutting down of the
customers side of the link. It could also be due to error
conditions which result in the going down. A large number of
these per unit time (synchronized off sysUpTime) would be
indicative of an error condition."
::= { xdslDevIfIntervalStatsEntry 5 }
xdslDevIfStatsUpStreamSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The speed in the upstream (from the remote
to the central site) direction. This object
compliments the ifSpeed object in the ifTable which
represents the speed in the downstream (from the
central to the remote site) direction. The speed
is measured in bits per second."
::= { xdslDevIfIntervalStatsEntry 6 }
xdslDevIfStatsCentralReceiverGain OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the receiver gain at the central site."
::= { xdslDevIfIntervalStatsEntry 7 }
xdslDevIfStatsCentralRecMargin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the margin at the central site."
::= { xdslDevIfIntervalStatsEntry 8 }
xdslDevIfStatsCentralRecAttenuationEstimate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the attenuation estimate at the central site."
::= { xdslDevIfIntervalStatsEntry 9 }
xdslDevIfStatsCentralRecTransmitPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the transmit power at the central site."
::= { xdslDevIfIntervalStatsEntry 10 }
xdslDevIfStatsCentralRecErrorRate OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the error rate at the central site. This string
will represent a floating point number of the form.
[ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase
are integers. In Other Words
ErrRate * [10^ -ErrRateBase]
shown below are example of the values returned.
123456E-5 = 1.23456
344567e-6 = 0.344567"
::= { xdslDevIfIntervalStatsEntry 11 }
xdslDevIfStatsCentralRecErroredSeconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the errored seconds at the central site."
::= { xdslDevIfIntervalStatsEntry 12 }
xdslDevIfStatsCentralRecSeverelyErroredSeconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the severely errored seconds at the central site."
::= { xdslDevIfIntervalStatsEntry 13 }
xdslDevIfStatsRemoteReceiverGain OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the receiver gain at the remote site"
::= { xdslDevIfIntervalStatsEntry 14 }
xdslDevIfStatsRemoteRecMargin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the margin at the remote site"
::= { xdslDevIfIntervalStatsEntry 15 }
xdslDevIfStatsRemoteRecAttenuationEstimate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the attenuation estimate at the remote site"
::= { xdslDevIfIntervalStatsEntry 16 }
xdslDevIfStatsRemoteRecTransmitPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the transmit power at the remote site."
::= { xdslDevIfIntervalStatsEntry 17 }
xdslDevIfStatsRemoteRecErrorRate OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the error rate at the remote site. This string
will represent a floating point number of the form a.b.
[ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase
are integers. In Other Words
ErrRate * [10^ -ErrRateBase]
shown below are example of the values returned.
123456E-5 = 1.23456
344567e-6 = 0.344567"
::= { xdslDevIfIntervalStatsEntry 18 }
xdslDevIfStatsRemoteRecErroredSeconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the errored seconds at the remote site."
::= { xdslDevIfIntervalStatsEntry 19 }
xdslDevIfStatsRemoteRecSeverelyErroredSeconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the severely errored seconds at the remote site."
::= { xdslDevIfIntervalStatsEntry 20 }
xdslDevIfStatsRemoteOctetsCorrected OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object reflects the number of octets corrected
when reed-solomon is turned on at the remote site."
::= { xdslDevIfIntervalStatsEntry 21 }
xdslDevIfStatsRemoteOctetsNotCorrected OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object reflects the number of octets not corrected
when reed-solomon is turned on at the remote site."
::= { xdslDevIfIntervalStatsEntry 22 }
xdslDevIfStatsRemoteReceivedKiloOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have been received by the xDSL
interface at the remote site divided by 1000."
::= { xdslDevIfIntervalStatsEntry 23 }
xdslDevIfStatsRemoteReceivedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of good packets that have been received by
the xDSL interface at the remote site."
::= { xdslDevIfIntervalStatsEntry 24 }
xdslDevIfStatsRemoteRecErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the number packet receive with error by the xDSL
interface at the remote site."
::= {xdslDevIfIntervalStatsEntry 25 }
xdslDevIfStatsRemoteDroppedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the number of good packets that have been
received by the xDSL interface at the remote site,
but have been dropped due to insufficient buffer capacity."
::= { xdslDevIfIntervalStatsEntry 26 }
xdslDevIfStatsRemoteTransmittedKiloOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have been transmitted by the
xDSL interface at the remote site divided by 1000."
::= { xdslDevIfIntervalStatsEntry 27 }
xdslDevIfStatsRemoteTransmittedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of pkts that have been transmitted by the
xDSL interface at the remote site."
::= { xdslDevIfIntervalStatsEntry 28 }
xdslDevIfStatsCentralRecErroredMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the errored minutes at the central site."
::= { xdslDevIfIntervalStatsEntry 29 }
xdslDevIfStatsCentralRecSeverelyErroredMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the severely errored minutes at the central site."
::= { xdslDevIfIntervalStatsEntry 30 }
xdslDevIfStatsRemoteRecErroredMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the errored minutes at the remote site."
::= { xdslDevIfIntervalStatsEntry 31 }
xdslDevIfStatsRemoteRecSeverelyErroredMinutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reflects the severely errored minutes at the remote site."
::= { xdslDevIfIntervalStatsEntry 32 }
xdslDevIfStatsCentralReceivedKiloOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have been received by the xDSL
interface at the central site divided by 1000."
::= { xdslDevIfIntervalStatsEntry 33 }
xdslDevIfStatsCentralTransmittedKiloOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have been transmitted by the
xDSL interface at the central site divided by 1000."
::= { xdslDevIfIntervalStatsEntry 34 }
xdslDevIfStatsCentralTransmittedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have been transmitted by the
xDSL interface at the central site."
::= { xdslDevIfIntervalStatsEntry 35 }
xdslDevIfStatsCentralReceivedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have been received by the
xDSL interface at the central site."
::= { xdslDevIfIntervalStatsEntry 36 }
xdslDevIfStatsCentralErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have been received by the
xDSL interface at the central site with error."
::= { xdslDevIfIntervalStatsEntry 37 }
-- The xdslDevIFConfig group. Implementation of this group is
-- mandatory for RADSL.
xdslDevIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF XdslDevIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The xdslDevIfConfigTable provides config information specific
to a xDSL device, or system. The table is indexed by an
object which corresponds to ifIndex. These ifIndex entries,
themselves, denote and identify specific xdsl interfaces on
the board or module. Also the configuration parameters are
grouped into two broad categories, 'up' and 'down'. 'up'
reflects the upstream direction (from the customer premises
to the central office). 'Down' reflects the downstream
direction (from the central office to the customer premises)"
::= { xdslDevIfConfig 1 }
xdslDevIfConfigEntry OBJECT-TYPE
SYNTAX XdslDevIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specific xDSL interface entry."
INDEX { xdslDevIfConfigIfIndex }
::= { xdslDevIfConfigTable 1 }
XdslDevIfConfigEntry ::=
SEQUENCE {
xdslDevIfConfigIfIndex
INTEGER,
xdslDevIfConfigPortSpeedBehaviour
INTEGER,
xdslDevIfConfigUpFixedPortSpeed
INTEGER,
xdslDevIfConfigDownFixedPortSpeed
INTEGER,
xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed
INTEGER,
xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed
INTEGER,
xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed
INTEGER,
xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed
INTEGER,
xdslDevIfConfigReedSolomonDownForwardErrorCorrection
INTEGER,
xdslDevIfConfigMarginThreshold
INTEGER,
xdslDevIfConfigEstimatedHrErrRateThreshold
INTEGER,
xdslDevIfConfigEstimatedDayErrRateThreshold
INTEGER,
xdslDevIfConfigPortID
DisplayString (SIZE (1..40)),
xdslDevIfLinkUpDownTransitionThreshold
INTEGER,
xdslDevIfConfigStartUpMargin
INTEGER (-3..9),
xdslDevIfConfigTxPowerAttenuation
INTEGER,
xdslDevIfConfigSnTxPowerAttenuation
INTEGER
}
xdslDevIfConfigIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object corresponds directly to each xDSL
interface as described in ifTable. "
::= { xdslDevIfConfigEntry 1 }
xdslDevIfConfigPortSpeedBehaviour OBJECT-TYPE
SYNTAX INTEGER {
fixed (1),
adaptive (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
behaviour of the specified port. The default
value for this object is fixed (1). "
::= { xdslDevIfConfigEntry 2 }
xdslDevIfConfigUpFixedPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
s272 (1),
s408 (2),
s544 (3),
s680 (4),
s816 (5),
s952 (6),
s1088 (7),
s91 (8),
s476 (9),
s340 (10),
s204 (11),
s136 (12),
s119 (13),
s102 (14),
s85 (15),
s68 (16),
s51 (17),
s45 (18),
s34 (19),
s11 (20),
s2320 (21),
s2046 (22),
s1552 (23),
s1040 (24),
s784 (25),
s528 (26),
s400 (27),
s277 (28),
s144 (29)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the upstream
speed of the specified port for fixed port speed
behaviour. All the speeds enumerated above are in kbps.
If the port speed behaviour is adaptive an error of
noSuchName will be returned by the agent.
The default value for this object is s1088 (7)."
::= { xdslDevIfConfigEntry 3 }
xdslDevIfConfigDownFixedPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
s640 (1),
s960 (2),
s1280 (3),
s1600 (4),
s1920 (5),
s2240 (6),
s2560 (7),
s2688 (8),
s3200 (9),
s4480 (10),
s5120 (11),
s6272 (12),
s7168 (13),
s1024 (14),
s896 (15),
s768 (16),
s512 (17),
s384 (18),
s256 (19),
s2320 (20),
s2046 (21),
s1552 (22),
s1040 (23),
s784 (24),
s528 (25),
s400 (26),
s277 (27),
s144 (28)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the downstream
speed of the specified port for fixed port speed
behaviour. All the speeds enumerated above are in kbps.
if the port speed behaviour is adaptive an error of noSuchName
will be returned by the agent.
The default value for this object is s2560 (7)."
::= { xdslDevIfConfigEntry 4 }
xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
s272 (1),
s408 (2),
s544 (3),
s680 (4),
s816 (5),
s952 (6),
s1088 (7),
s91 (8),
s476 (9),
s340 (10),
s204 (11),
s136 (12),
s119 (13),
s102 (14),
s85 (15),
s68 (16),
s51 (17),
s45 (18),
s34 (19),
s11 (20)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
upper bound for the upstream port speed of the specified port
for adaptive port speed behaviour. The speeds are measured
in kbps. If the port speed behaviour is fixed an error of
noSuchName will be returned by the agent. The default value for
this object is s1088."
::= { xdslDevIfConfigEntry 5 }
xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
s272 (1),
s408 (2),
s544 (3),
s680 (4),
s816 (5),
s952 (6),
s1088 (7),
s91 (8),
s476 (9),
s340 (10),
s204 (11),
s136 (12),
s119 (13),
s102 (14),
s85 (15),
s68 (16),
s51 (17),
s45 (18),
s34 (19),
s11 (20)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
lower bound for the upstream port speed of the
specified port for adaptive port speed behaviour
in kbps. If the port speed behaviour is fixed an
error of noSuchName will be returned by the agent.
The default value for this object s272."
::= { xdslDevIfConfigEntry 6 }
xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
s640 (1),
s960 (2),
s1280 (3),
s1600 (4),
s1920 (5),
s2240 (6),
s2560 (7),
s2688 (8),
s3200 (9),
s4480 (10),
s5120 (11),
s6272 (12),
s7168 (13),
s1024 (14),
s896 (15),
s768 (16),
s512 (17),
s384 (18),
s256 (19)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to
the upper bound allowed for the downstream port speed
of the specified port for adaptive port speed
behaviour. The speeds are measured in kbps.
if the port speed behaviour is fixed an error of noSuchName
will be returned by the agent. The default value for this
object is s2560 (7)."
::= { xdslDevIfConfigEntry 7 }
xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
s640 (1),
s960 (2),
s1280 (3),
s1600 (4),
s1920 (5),
s2240 (6),
s2560 (7),
s2688 (8),
s3200 (9),
s4480 (10),
s5120 (11),
s6272 (12),
s7168 (13),
s1024 (14),
s896 (15),
s768 (16),
s512 (17),
s384 (18),
s256 (19)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
Minimum lower bound allowed for the downstream port speed
of the specified port for adaptive port speed behaviour.
If the port speed behaviour is fixed an error of noSuchName
will be returned by the agent. The speeds are measured in kbps.
The default value for this object is s640(1)."
::= { xdslDevIfConfigEntry 8 }
xdslDevIfConfigReedSolomonDownForwardErrorCorrection OBJECT-TYPE
SYNTAX INTEGER {
minimizeError (1),
minimizeDelay (2),
reedSolomonNotSupported(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
Reed-Solomon forward error correction in the downstream
direction. The default value of this object should be
minimizeError (1)."
::= { xdslDevIfConfigEntry 9 }
xdslDevIfConfigMarginThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the offset from
the startup margin. The threshold margin is calculated
by subtracting the offset from the startup margin.
Permissible range of values are between -7 and 14.
A value of -9999 disables the threshold check. The default
value of this object is 3"
::= { xdslDevIfConfigEntry 10 }
xdslDevIfConfigEstimatedHrErrRateThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
estimated error rate threshold value on an hourly basis.
A value of -9999 disables the threshold check. The default value
for this object is 1000."
::= { xdslDevIfConfigEntry 11 }
xdslDevIfConfigEstimatedDayErrRateThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
estimated error rate threshold value on a daily basis. A
value of -9999 disables this threshold check. The default value
for this object is 10000"
::= { xdslDevIfConfigEntry 12 }
xdslDevIfConfigPortID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to 40 character
information only field that identifies what the DSL
port is connected to (Circuit ID, MDF location,
Customer name, etc.)"
::= { xdslDevIfConfigEntry 13 }
xdslDevIfLinkUpDownTransitionThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the threshold
value for link up-down transitions. If link up-down's exceed
this threshold value a xdslLinkupDownTransitions
trap is generated. This value would represent the number
of link up-down transitions in a 15 minute interval. A value
of -9999 disables the threshold check. The default value for this
object is 0"
::= { xdslDevIfConfigEntry 14 }
xdslDevIfConfigStartUpMargin OBJECT-TYPE
SYNTAX INTEGER (-3..9)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value of this object corresponds to the startup value
of the margin for a DSL interface (specified by ifIndex).
The unit is db (decibels. The higher the margin the better
the quality of the line. The default value of this object is 3."
::= { xdslDevIfConfigEntry 15 }
xdslDevIfConfigTxPowerAttenuation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value corresponds to the Transmitt Power Attenuation in dB
for the access node. This value represents the downstream power
level in dB. Permissible range of values are between -6 and 0.
The default value of this object is 0 dB. The power levels +3
and +6 may be used in future."
::= { xdslDevIfConfigEntry 16 }
xdslDevIfConfigSnTxPowerAttenuation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value corresponds to the Transmitt Power Attenuation in dB
for the service node. This value represents the upstream power
level in dB. The default value of this object is -6 dB."
::= { xdslDevIfConfigEntry 17 }
-- the Remote System Table
xdslRemoteSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF XdslRemoteSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Remote System information table. This table is based
on the mib-2 system mib."
::= { xdslRemoteSys 1 }
xdslRemoteSysEntry OBJECT-TYPE
SYNTAX XdslRemoteSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specific xDSL interface Remote Endpoint entry."
INDEX { xdslRemoteSysIndex }
::= { xdslRemoteSysTable 1 }
XdslRemoteSysEntry ::=
SEQUENCE {
xdslRemoteSysIndex
INTEGER,
xdslRemoteSysDescr
DisplayString (SIZE (0..255)),
xdslRemoteSysObjectID
OBJECT IDENTIFIER,
xdslRemoteSysUpTime
TimeTicks,
xdslRemoteSysContact
DisplayString (SIZE (0..255)),
xdslRemoteSysName
DisplayString (SIZE (0..255)),
xdslRemoteSysLocation
DisplayString (SIZE (0..255)),
xdslRemoteSysServices
INTEGER (0..127),
xdslRemoteSysCircuitId
DisplayString (SIZE(1..32))
}
-- the Remote System group
xdslRemoteSysIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 1 }
xdslRemoteSysDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 2 }
xdslRemoteSysObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 3 }
xdslRemoteSysUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 4 }
xdslRemoteSysContact OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 5 }
xdslRemoteSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 6 }
xdslRemoteSysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 7 }
xdslRemoteSysServices OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Refer to the mib-2 system MIB for a description."
::= { xdslRemoteSysEntry 8 }
xdslRemoteSysCircuitId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object reflects the Circuit ID
for a Service Node."
::= { xdslRemoteSysEntry 9 }
-- the Remote DTE Status Table
xdslRemoteDTEStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF XdslRemoteDTEStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Remote DTE Status table. This provides status information about the
DTE port of the DSL RTUs."
::= { xdslRemoteDTEStatus 1 }
xdslRemoteDTEStatusEntry OBJECT-TYPE
SYNTAX XdslRemoteDTEStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" This provides status information about the
DTE port of a specific DSL RTU."
INDEX { xdslRemoteDTEStatusIndex }
::= { xdslRemoteDTEStatusTable 1 }
XdslRemoteDTEStatusEntry ::=
SEQUENCE {
xdslRemoteDTEStatusIndex
INTEGER,
xdslRemoteDTEState
INTEGER,
xdslRemoteDTEType
INTEGER,
xdslRemoteDTEClockSource
INTEGER,
xdslRemoteDTEStrobe
INTEGER,
xdslRemoteDTELoopbackState
INTEGER
}
-- the Remote DTE Status group
xdslRemoteDTEStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object corresponds directly to each DSL interface as
described in the ifTable."
::= {xdslRemoteDTEStatusEntry 1 }
xdslRemoteDTEState OBJECT-TYPE
SYNTAX INTEGER {
inService (1),
outOfService (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object reflects the state of the DTE interface of the
DSL RTU."
::= {xdslRemoteDTEStatusEntry 2 }
xdslRemoteDTEType OBJECT-TYPE
SYNTAX INTEGER {
v35 (1),
eia530 (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object reflects the configuration of the DTE interface
of the DSL RTU."
::= {xdslRemoteDTEStatusEntry 3 }
xdslRemoteDTEClockSource OBJECT-TYPE
SYNTAX INTEGER {
internal (1),
external (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object reflects the timing configuration of the DTE
interface of the DSL RTU."
::= {xdslRemoteDTEStatusEntry 4 }
xdslRemoteDTEStrobe OBJECT-TYPE
SYNTAX INTEGER {
risingEdge (1),
fallingEdge (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object reflects the clock edge timing configuration of the DTE
interface of the DSL RTU."
::= {xdslRemoteDTEStatusEntry 5 }
xdslRemoteDTELoopbackState OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object reflects the loopback state of the DTE
interface of the DSL RTU."
::= {xdslRemoteDTEStatusEntry 6 }
-- The xdslDevMvlConfig group. Implementation of this group is
-- mandatory for Atlantis MVL Rel 1.0.
xdslDevMvlIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF XdslDevMvlIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The xdslDevMvlIfConfigTable provides config information specific
to a xDSL(MVL) device, or system. The table is indexed by an
object which corresponds to ifIndex. These ifIndex entries,
themselves, denote and identify specific xdsl(Mvl) interfaces on
the board or module. "
::= { xdslDevMvlIfConfig 1 }
xdslDevMvlIfConfigEntry OBJECT-TYPE
SYNTAX XdslDevMvlIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specific xDSL(MVL) interface entry."
INDEX { xdslDevMvlIfConfigIfIndex }
::= { xdslDevMvlIfConfigTable 1 }
XdslDevMvlIfConfigEntry ::=
SEQUENCE {
xdslDevMvlIfConfigIfIndex
INTEGER,
xdslDevMvlIfConfigUpperBoundPortSpeed
INTEGER,
xdslDevMvlIfConfigMarginThreshold
INTEGER,
xdslDevMvlIfConfigPortID
DisplayString (SIZE (1..40)),
xdslDevMvlIfLinkUpDownTransitionThreshold
INTEGER,
xdslDevMvlIfConfigOnHookTxPowerAttenuation
INTEGER,
xdslDevMvlIfConfigOffHookTxPowerAttenuation
INTEGER
}
xdslDevMvlIfConfigIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object corresponds directly to each xDSL(MVL)
interface as described in ifTable. "
::= { xdslDevMvlIfConfigEntry 1 }
xdslDevMvlIfConfigUpperBoundPortSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the upper bound
port speed of the specified port. The speeds are measured in kbps.
Supported speeds are 128, 192, 256, 320, 384, 448, 512
576, 640, 704, 768.
The default value of this object is 768 "
::= { xdslDevMvlIfConfigEntry 2 }
xdslDevMvlIfConfigMarginThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
Margin threshold value. Permissible range of
values are between -5 and 9. A value of -9999
disables the threshold check. The default value is 3"
::= { xdslDevMvlIfConfigEntry 3 }
xdslDevMvlIfConfigPortID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to 40 character
information only field that identifies what the DSL
port is connected to (Circuit ID, MDF location,
Customer name, etc.)"
::= { xdslDevMvlIfConfigEntry 4 }
xdslDevMvlIfLinkUpDownTransitionThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the threshold
value for link up-down transitions. If link up-down's exceed
this threshold value a xdslLinkupDownTransitions
trap is generated. This value would represent the number
of link up-down transitions in a 15 minute interval. A value
of -9999 disables the threshold check. The default value for this
object is 0"
::= { xdslDevMvlIfConfigEntry 5 }
xdslDevMvlIfConfigOnHookTxPowerAttenuation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value corresponds to the On-hook Transmitt Power Attenuation
in dB for the access node and the service node. This value represents
both downstream and upstream power level in dB while the phone is
On-hook. Permissible range of values are between -2 and +10. The
default value of this object is 10 dB."
::= { xdslDevMvlIfConfigEntry 6 }
xdslDevMvlIfConfigOffHookTxPowerAttenuation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value corresponds to the Off-hook Transmitt Power Attenuation
in dB for the access node and the service node. This value represents
both downstream and upstream power level in dB while the phone is
Off-hook. Permissible range of values are between -2 and +7. The
default value of this object is 7 dB. "
::= { xdslDevMvlIfConfigEntry 7 }
-- The xdslDevNAPCustomerAccount group. Implementation of this group is
-- mandatory for Atlantis Rel 1.1.
xdslDevNAPCustomerAccountTable OBJECT-TYPE
SYNTAX SEQUENCE OF XdslDevNAPCustomerAccountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The xdslDevNAPCustomerAccountTable provides customer accounting
information on each DSL port. Network Access Providers can accurately
bill their end station DSL customers by the amount of usage.
The table is indexed by ifIndex and xdslDevNAPCustomerAccountInterval
The ifIndex identifies specific xdsl interface on the device and
xdslDevNAPCustomerAccountInterval specifies the accounting information
is for the current day or the previous day. Customer data excludes all
traffic used for management purpose."
::= { xdslDevNAPCustomerAccount 1 }
xdslDevNAPCustomerAccountEntry OBJECT-TYPE
SYNTAX XdslDevNAPCustomerAccountEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Provides customer related accounting information specific to an
xDSL interface entry."
INDEX { xdslDevNAPCustomerAccountIfIndex,
xdslDevNAPCustomerAccountInterval }
::= { xdslDevNAPCustomerAccountTable 1 }
XdslDevNAPCustomerAccountEntry ::=
SEQUENCE {
xdslDevNAPCustomerAccountIfIndex
INTEGER,
xdslDevNAPCustomerAccountInterval
INTEGER,
xdslDevNAPCustomerAccountRecKiloOctets
INTEGER,
xdslDevNAPCustomerAccountTrxKiloOctets
INTEGER
}
xdslDevNAPCustomerAccountIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object corresponds directly to each xDSL
interface as described in ifTable. "
::= { xdslDevNAPCustomerAccountEntry 1 }
xdslDevNAPCustomerAccountInterval OBJECT-TYPE
SYNTAX INTEGER {
currentDay (1),
previousDay (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the interval of time
during which customer accounting data were collected. Day
starts at 12.01 midnight "
::= { xdslDevNAPCustomerAccountEntry 2 }
xdslDevNAPCustomerAccountRecKiloOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Customer data received at the AN's DSL port in 1000 Octets.
The default value of this object is 0 "
::= { xdslDevNAPCustomerAccountEntry 3 }
xdslDevNAPCustomerAccountTrxKiloOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Customer data transmitted over the AN's DSL port in 1000 Octets.
The default value of this object is 0 "
::= { xdslDevNAPCustomerAccountEntry 4 }
-- The xdslDevIDSLConfig Group { xdslDevice 9 }
xdslDevIDSLConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF XdslDevIDSLConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The xdslDevIDSLConfigTable provides configuration specific to the IDSL link."
::= { xdslDevIDSLConfig 1 }
xdslDevIDSLConfigEntry OBJECT-TYPE
SYNTAX XdslDevIDSLConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specific IDSL configuration entry."
INDEX { ifIndex }
::= { xdslDevIDSLConfigTable 1 }
XdslDevIDSLConfigEntry ::=
SEQUENCE {
xdslDevIDSLConfigPortSpeedBehaviour
INTEGER,
xdslDevIDSLConfigPortSpeed
INTEGER,
xdslDevIDSLConfigPortID
DisplayString (SIZE (1..40)),
xdslDevIDSLTimingPortTransceiverMode
INTEGER,
xdslDevIDSLConfigMarginThreshold
INTEGER,
xdslDevIDSLLinkUpDownTransitionThreshold
INTEGER
}
xdslDevIDSLConfigPortSpeedBehaviour OBJECT-TYPE
SYNTAX INTEGER {
fixed (1),
adaptive (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
behaviour of the specified port. The default
value for this object is fixed (1). "
::= { xdslDevIDSLConfigEntry 1 }
xdslDevIDSLConfigPortSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to both upstream
and downstream speed of the specified port. All the
speeds are in kbps. The default value for this object
is 128 kbps."
::= { xdslDevIDSLConfigEntry 2 }
xdslDevIDSLConfigPortID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to 40 character
information only field that identifies what the DSL
port is connected to (Circuit ID, MDF location,
Customer name, etc.)"
::= { xdslDevIDSLConfigEntry 3 }
xdslDevIDSLTimingPortTransceiverMode OBJECT-TYPE
SYNTAX INTEGER {
networkTiming (1),
localTiming (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The transceiver mode selected on the timing source port.
Only one IDSL port can be set to NT mode. This timing
will then be distributed to all other IDSL ports in the
chassis that are set to LT.
The selected xdslDevIDSLPrimaryTimingSourcePort provides clocking
signals to the DSLAM when the transceiver mode is set to Network
timing. The port selected for Network Timing mode will probably not
used for customer data, but will receive a 2.048 Mhz Network clocking
signal from a central office timing source and distribute this timing
to other IDSL port cards."
::= { xdslDevIDSLConfigEntry 4 }
xdslDevIDSLConfigMarginThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the
Margin threshold value. A value of -9999 disables the
threshold check. The value range of this object is
-5 to 10. The default value is 3"
::= { xdslDevIDSLConfigEntry 5 }
xdslDevIDSLLinkUpDownTransitionThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object corresponds to the threshold
value for link up-down transitions. If link up-down's exceed
this threshold value a xdslLinkupDownTransitions
trap is generated. This value would represent the number
of link up-down transitions in a 15 minute interval. A value
of -9999 disables the threshold check. The value range of this
object is 0 to 1000. The default value for this object is 0"
::= { xdslDevIDSLConfigEntry 6 }
-- The xdslLinkUpDownInformation group.
xdslLinkDownReason OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry contains the reason as to why
the DSL Link went down. This information
is obtained when the DSL Link is coming up"
::= { xdslLinkUpDownInformation 1 }
-- The xdslRemoteInjection group.
xdslRemoteInjectionType OBJECT-TYPE
SYNTAX INTEGER {
filter (1)
}
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The value of this object corresponds to the remote
injection type"
::= { xdslRemoteInjection 1 }
-- Trap definitions
-- All traps sent from the DSL cards will have the MCC card's address
-- (in the NAP domain) in the ip-address field of the TRAP PDU.
-- The first varbind of the trap PDU will be the ifIndex which is
-- overloaded to specify which card in the chassis sent the trap.
xdslLinkUpDownTransitions TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the sending protocol
entity recognizes that one of the xDSL communication
links is in a fluctuating state. This is a trap of
'minor' class."
::= 1
xdslPortSpeedLow TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the port speed of the
xDSL link has dropped below a threshold value.
This is a trap of 'warning' class"
::= 2
xdslPortSpeedNormal TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the port speed of the
xDSL link has has gone above the threshold value.
This is a trap of 'warning' class. This trap compliments the
xdslPortSpeedLow Trap"
::= 102
xdslMarginLow TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the margin estimate
is below a customer set threshold value. this is a trap
of 'minor' class."
::= 3
xdslMarginNormal TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the margin estimate has gone
above a customer set threshold value. this is a trap
of 'minor' class. this trap compliments the xdslMarginLow
trap"
::= 103
xdslErrorRateHigh TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the error rate estimates
is above a customer set threshold value. This is a trap
of 'minor' class."
::= 4
xdslErrorRateNormal TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the error rate estimates
gone below a customer set threshold value. This is a trap
of 'minor' class. This trap compliments the xdslErrorRateHigh trap."
::= 104
xdslPortFailure TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the processor detected
a bad modem set. This is a trap of 'major' class"
::= 5
xdslPortOperational TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the modem set which was bad is now operational.
This is a trap of 'major' class. This trap compliments the
xdslPortFailure trap."
::= 105
xdslTestStart TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that a diagnostic test has started on one of the
ports"
::= 6
xdslTestOver TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"This trap signifies that the test has completed on one of the
ports. This trap compliments the xdslTestStart trap."
::= 106
xdslRtuTypeMismatch TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"The RTU configured in the DSL card does NOT match with the RTU connected
to the DSL port indicated by the ifIndex."
::= 7
xdslRtuTypeMismatchClear TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"The RTU configured in the DSL card does match with the RTU connected
to the DSL port indicated by the ifIndex."
::= 107
xdslRtuSelfTestFail TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES { ifIndex }
DESCRIPTION
"A self test failure from the RTU connected
to the DSL port indicated by the ifIndex."
::= 16
xdslRtuLastGasp TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex}
DESCRIPTION
"Card received LastGap message from SN followed by a link
down condition one minute later. "
::= 17
xdslSNDeviceFail TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex}
DESCRIPTION
"Operating software has detected an internal device failure. The
RTU is still operating."
::= 18
xdslSNSelfTestFail TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex}
DESCRIPTION
"Failure of the RTU's hardware components. This trap is only set if the
hardware failure still allows sending traps."
::= 19
xdslSNFatalReset TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex}
DESCRIPTION
"Fatal error device reset"
::= 20
xdslLinkDownAnalysisTrap TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex, xdslLinkDownReason}
DESCRIPTION
"This trap signifies that the sending protocol
entity recognizes that the xDSL communication
link is up. LinkDownReason conveys the reason
for link down."
::= 21
-- This trap has been deprecated. Use the trap in pdn_filters.mib
xdslRemoteInjectionFailureTrap TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex, pdnPortConfigVNID, xdslRemoteInjectionType}
DESCRIPTION
"This trap signifies that the injection of filters to SN failed
It is of warning class"
::= 22
-- This trap has been deprecated. Use the trap in pdn_filters.mib
xdslRemoteInjectionIncompatibleTrap TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex, pdnPortConfigVNID, xdslRemoteInjectionType}
DESCRIPTION
"This trap signifies that the injection of filters is not supported
by the SN. It is of warning class"
::= 23
xdslLossOfNetworkTimingSignalTrap TRAP-TYPE
ENTERPRISE xdslDevice
VARIABLES {ifIndex}
DESCRIPTION
"This trap is generated by an IDSL port card when it detects
that the line supplying timing signals to the chassis on the port
designated as NT has dropped. The ifIndex corresponds to the port
designated as NT."
::= 24
END
View Git Blame Copy Permalink