2512 lines
107 KiB
Plaintext
2512 lines
107 KiB
Plaintext
--
|
|
-- Each Trap contains the Trap OID as well as the following OIDs:
|
|
-- SeverityLevel
|
|
-- (ActualTrapDetails)
|
|
-- System Name
|
|
-- System Date
|
|
-- System Time
|
|
-- System Uptime
|
|
--
|
|
--
|
|
-- (Actual Trap Details) is a string that is comprised of three sections
|
|
-- separated by colons.
|
|
-- Severity : Name of task to which the trap relates : Status message
|
|
-- Severity section will be one of these possibilities: Disabled, Warning, Alert
|
|
----------------------------------
|
|
--
|
|
-- For HP Openview; the user can use $1 $2 $3 $4 $5 $6 or
|
|
-- Severity: $1 Trap $2 System $3 $4 $5 Uptime $6
|
|
-- as a default format string in the trap.conf file,
|
|
-- otherwise, too much information will be displayed.
|
|
-- $1 Severity Level
|
|
-- $2 Actual Trap Details
|
|
-- $3 System Name
|
|
-- $4 System Date
|
|
-- $5 System Time
|
|
-- $6 System Uptime
|
|
--
|
|
|
|
CONTIVITY-TRAPS-V1-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString,
|
|
sysName,
|
|
sysObjectID,
|
|
ifIndex,
|
|
ifAdminStatus,
|
|
ifOperStatus,
|
|
ifType,
|
|
ifDescr,
|
|
snmp
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE FROM RFC-1212
|
|
TRAP-TYPE FROM RFC-1215
|
|
IpAddress FROM RFC1155-SMI
|
|
MODULE-IDENTITY FROM SNMPv2-SMI
|
|
-- SNMPv2-SMI(RFC2578 or STD58)
|
|
contivity FROM NEWOAK-MIB;
|
|
|
|
-- The following MODULE-IDENTITY definition can be commented out if the MIB parser
|
|
-- you are using has trouble parsing it. The object id defined, "contivityTrapV1",
|
|
-- is not used in the mib. It is here only for documentation purposes.
|
|
contivityTrapsV1 MODULE-IDENTITY
|
|
LAST-UPDATED "0604062300Z" -- April 6, 2006 7:00pm EST
|
|
ORGANIZATION "Nortel"
|
|
CONTACT-INFO
|
|
"support@nortel.com
|
|
Postal: Nortel
|
|
600 Technology Park Drive
|
|
Billerica, MA 01821
|
|
Tel: +1 978 670 8888
|
|
E-Mail: support@nortel.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB defines the traps, and bind objects used in the traps,
|
|
that are sent by the VPN Router."
|
|
REVISION "0005122000Z" -- May 12, 2000 4:00pm EST
|
|
DESCRIPTION
|
|
"Add ifIndex, ifDescr, ifType to the following traps:
|
|
lanCardStatusTrap, t1WANStatusTrap, t3WANStatusTrap
|
|
Add ifReasonForStatus-ces, ifPhysLocation-ces,
|
|
ifPhysRelPos-ces, ifIpAddr-ces, ifTunnelName-ces,
|
|
ifTunnelRemoteIpAddr-ces to Link Up and Link Down traps.
|
|
."
|
|
REVISION "0006281800Z" -- Jul 28, 2000 2:00pm EST
|
|
DESCRIPTION
|
|
"Added Possible Values: clauses to most of the traps.
|
|
Change ifTunnelName-ces to ifName-ces.
|
|
Using ifName-ces instead of ifXName so that this mib will compile
|
|
with only V1 mibs.
|
|
"
|
|
REVISION "0006282100Z" -- Jul 28, 2000 5:00pm EST
|
|
DESCRIPTION
|
|
"Added Possible Values: to all but:
|
|
load balancing, firewall, failed login attempt, security intrusion
|
|
"
|
|
REVISION "0008101500Z" -- Aug 10, 2000 11:00am EST
|
|
DESCRIPTION
|
|
"Added Possible Values: to:
|
|
load balancing, firewall, failed login attempt, security intrusion
|
|
"
|
|
REVISION "0006182200Z" -- Jul 18, 2000 6:00pm EST
|
|
DESCRIPTION
|
|
"Add firewallPolicyType-ces,
|
|
firewallRuleType-ces, firewallRuleIntfName-ces,
|
|
firewallRuleNumber-ces, firewallSrcAddr-ces, firewallSrcPort-ces,
|
|
firewallDestAddr-ces, firewallDestPort-ces, firewallProtocolID-ces,
|
|
firewallRuleAction-ces, firewallIpHdr-ces, firewallUdpTcpHdr-ces,
|
|
firewallRuleTriggeredTrap. Change ifTunnelName-ces to ifName-ces.
|
|
Using ifName-ces instead of ifXName so that this mib will compile
|
|
with only V1 mibs.
|
|
"
|
|
REVISION "0102272300Z" -- Feb 27, 2001 7:00pm EST
|
|
DESCRIPTION
|
|
"Changed severityLevel to reflect the actual health of the object the
|
|
trap is describing.
|
|
"
|
|
REVISION "0103262300Z" -- Mar 26, 2001 7:00pm EST
|
|
DESCRIPTION
|
|
"Changed softwareCESTrapInfo to serviceCESTrapInfo.
|
|
"
|
|
REVISION "0105102300Z" -- May 10, 2001 7:00pm EST
|
|
DESCRIPTION
|
|
"Added licensingStatus trap.
|
|
"
|
|
::= { contivity 0 }
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in [9], and the TRAP-TYPE macro as defined in [10].
|
|
|
|
-- Textual Conventions
|
|
-- PortLocation-ces defines the physical location of the port in relation to the
|
|
-- CES chassis as a whole.
|
|
PortLocation-ces ::= INTEGER {
|
|
motherBoardOrSlot0(1),
|
|
slot1(2),
|
|
slot2(3),
|
|
slot3(4),
|
|
slot4(5),
|
|
slot5(6)
|
|
}
|
|
-- IfReasonForStatus-ces provides detailed information as to why the CES has issued
|
|
-- this trap. Ex. For a branch office connection that has timed out, the timed-out
|
|
-- value would be applicable. Also for a branch office, if the remote end of the
|
|
-- tunnel stopped responding, then no-response would be applicable.
|
|
-- For physical interfaces, ip-addr-chg informs that the IP address assigned to the
|
|
-- port has changed. This TC is used for the Link Up and Link Down traps.
|
|
IfReasonForStatus-ces ::= INTEGER {
|
|
unknown(1),
|
|
idle-time-out(2),
|
|
ip-addr-chg(3),
|
|
no-response(4),
|
|
user-interaction(5),
|
|
time-limit(6),
|
|
testing(7),
|
|
test-complete-success(8),
|
|
test-complete-failure(9),
|
|
link-down(10),
|
|
link-up(11)
|
|
}
|
|
|
|
-- FirewallPolicyType-ces
|
|
FirewallPolicyType-ces ::= INTEGER {
|
|
firewall(1),
|
|
nat(2)
|
|
}
|
|
|
|
-- FirewallRuleType-ces specifies whether it was a source or destination
|
|
-- that trigger the rule.
|
|
FirewallRuleType-ces ::= INTEGER {
|
|
over-ride(1),
|
|
sourceInterface(2),
|
|
destinationInterface(3),
|
|
default(4)
|
|
}
|
|
|
|
-- FirewallRuleAction-ces specifies what is to be done with the packet.
|
|
FirewallRuleAction-ces ::= INTEGER {
|
|
unknown(1),
|
|
allow(2),
|
|
reject(3),
|
|
drop(4)
|
|
}
|
|
--
|
|
-- The following are passed with every trap.
|
|
--
|
|
|
|
severityLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
alert(1),
|
|
warning(2),
|
|
disabled(3),
|
|
healthy(4),
|
|
unknown(5)
|
|
|
|
|
|
|
|
|
|
|
|
-- fatal(1),
|
|
-- major(2),
|
|
-- minor(3),
|
|
-- informational(4),
|
|
-- insignificant(5),
|
|
-- reversal(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Severity of specific trap."
|
|
::= {contivity 7}
|
|
|
|
systemName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "System Name."
|
|
::= {contivity 8}
|
|
|
|
systemDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "System Date."
|
|
::= {contivity 9}
|
|
|
|
systemTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "System Time."
|
|
::= {contivity 10}
|
|
|
|
systemUpTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "System Up Time."
|
|
::= {contivity 11}
|
|
|
|
-- Groups
|
|
|
|
-- Hardware related Traps
|
|
|
|
hardwareCESTrapInfo OBJECT IDENTIFIER
|
|
::= {contivity 1}
|
|
|
|
-- Trap #1001 ---------------------------------
|
|
hardDisk1Status OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hard Disk Number 1 Status.
|
|
Possible Values:
|
|
Warning: Hard Disk 1 : Device /ide1/ not available
|
|
Warning: Hard Disk 1 : Utilization exceeds 75%% on /ide1/
|
|
Alert: Hard Disk 1 : Utilization exceeds 87.5%% on /ide1/
|
|
"
|
|
::= {hardwareCESTrapInfo 1}
|
|
|
|
hardDisk1StatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,hardDisk1Status, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Hard Disk Number 1 Status"
|
|
::= 1001
|
|
|
|
-- Trap #1002 ---------------------------------
|
|
hardDisk0Status OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hard Disk Number 0 Status.
|
|
Possible Values:
|
|
Warning: Hard Disk 0 : Device /ide0/ not available
|
|
Warning: Hard Disk 0 : Utilization exceeds 75%% on /ide0/
|
|
Alert: Hard Disk 0 : Utilization exceeds 87.5%% on /ide0/
|
|
"
|
|
::= {hardwareCESTrapInfo 2}
|
|
|
|
hardDisk0StatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,hardDisk0Status, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Hard Disk Number 0 Status"
|
|
::= 1002
|
|
|
|
-- Trap #1003 ---------------------------------
|
|
memoryUsage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Memory Usage Status.
|
|
Possible Values:
|
|
Warning: Memory Usage : Utilization exceeds 75%
|
|
Alert: Memory Usage : Utilization exceeds 87.5%
|
|
"
|
|
::= {hardwareCESTrapInfo 3}
|
|
|
|
memoryUsageTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,memoryUsage, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Memory Usage Status"
|
|
::= 1003
|
|
|
|
-- Trap #1004 ---------------------------------
|
|
lanCardStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of any LAN cards on the system.
|
|
Possible Values:
|
|
Please note that X corresponds to the Xth slot in the system.
|
|
Please note that Y corresponds to the relative position of the port
|
|
on the card in the Xth slot in the system.
|
|
|
|
Warning: LAN on Slot X Interface Y: Device feiX has no IP address;
|
|
Warning: LAN on Slot X Interface Y: Device feiX disabled;
|
|
Alert: LAN on Slot X Interface Y: Device feiX down;
|
|
Alert: LAN on Slot X Interface Y: Device feiX Invalid Device X
|
|
|
|
The Alert status above indicates that the interface has no
|
|
link when it should. Possible causes are improper connection
|
|
speeds and duplex, improper cabling or a configuration issue."
|
|
::= {hardwareCESTrapInfo 4}
|
|
|
|
|
|
lanCardStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,
|
|
lanCardStatus,
|
|
systemName,
|
|
systemDate,
|
|
systemTime,
|
|
systemUpTime,
|
|
ifIndex, -- ifIndex of the interface.
|
|
ifDescr, -- ifDescr of the interface.
|
|
ifType -- ifType, this provides descrimination of interfaces that are tunnels.
|
|
}
|
|
DESCRIPTION "Status of any LAN cards on the system"
|
|
::= 1004
|
|
|
|
|
|
-- Trap #1005 ---------------------------------
|
|
cpuTwoStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of second CPU.
|
|
Possible Values:
|
|
Alert: CPU 2: Program load failed;
|
|
Alert: CPU 2: Bootup did not complete;
|
|
Alert: CPU 2: Communication lost;
|
|
Alert: CPU 2: Failed. Reason unknown;
|
|
|
|
Each of these indicates that the application CPU is
|
|
not functioning correctly. The system will continue to
|
|
function without the application processor. This can only
|
|
be sent from a system with multiple CPUs. See the Admin
|
|
Guide for a list of systems that contain multiple CPUs.
|
|
The CES will emit an audible alarm and the networking
|
|
performance will be degraded. A Nortel support
|
|
representative should be contacted if rese ing the CES
|
|
does not correct the problem.
|
|
|
|
The effect is the same in each case. The system will be
|
|
running with only one CPU."
|
|
::= {hardwareCESTrapInfo 5}
|
|
|
|
cpuTwoStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,cpuTwoStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of second CPU.
|
|
"
|
|
::= 1005
|
|
|
|
-- Trap #1006 ---------------------------------
|
|
fanOneStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of the first CPU fan.
|
|
Possible Values:
|
|
Alert: CPU One Fan: Fan not functioning;
|
|
|
|
This indicates that the fan on the primary processor is
|
|
running either below the specified speed or not running
|
|
at all. If a fan is not working correctly, it must be
|
|
fixed as soon as possible or damage may result.
|
|
|
|
This is a high priority event which can prove catastrophic
|
|
to the processor as well as the system. This trap can only
|
|
be sent by systems which contain an actual fan on the
|
|
primary CPU."
|
|
::= {hardwareCESTrapInfo 6}
|
|
|
|
fanOneStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,fanOneStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the first CPU fan"
|
|
::= 1006
|
|
|
|
-- Trap #1007 ---------------------------------
|
|
fanTwoStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of the second CPU fan
|
|
Possible Values:
|
|
Alert: CPU Two Fan: Fan not functioning;
|
|
|
|
This indicates that the fan on the auxiliary processor is
|
|
running either below the specified speed or not running
|
|
at all. If a fan is not working correctly, it must be
|
|
fixed as soon as possible or damage may result.
|
|
|
|
This is a high priority event which can prove catastrophic
|
|
to the processor as well as the system. This trap can only
|
|
be sent by systems which contain an actual fan on the
|
|
auxiliary CPU."
|
|
::= {hardwareCESTrapInfo 7}
|
|
|
|
fanTwoStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,fanTwoStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the second CPU fan"
|
|
::= 1007
|
|
|
|
-- Trap #1008 ---------------------------------
|
|
chassisFanStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of the chassis fan.
|
|
Possible Values:
|
|
Alert: Chassis Fan: Fan not functioning;
|
|
Alert: Chassis Fan 2: Fan not functioning;
|
|
|
|
This indicates that one of the chassis fans is running
|
|
either below the specified range of speed or not running
|
|
at all. If a fan is not working correctly, it must be
|
|
fixed as soon as possible or damage may result.
|
|
|
|
If either of the fans are not working properly, the box
|
|
must be looked at by a service technician as soon as
|
|
possible. Not doing so will result in overheating of
|
|
the system, improper system operation, and possible
|
|
component failure."
|
|
::= {hardwareCESTrapInfo 8}
|
|
|
|
chassisFanStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,chassisFanStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the chassis fan."
|
|
::= 1008
|
|
|
|
|
|
-- Trap #1009 ---------------------------------
|
|
fiveVoltsPositive OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of +5 Volt power.
|
|
Possible Values:
|
|
Alert: Voltage 5 V Plus: Voltage out of range;
|
|
|
|
The supplied voltage to the system is not within the
|
|
the specified range for that particular voltage.
|
|
Certain platforms do not supply or monitor some of
|
|
these voltages. See the Health Check section of the
|
|
Admin Guide for a description of which platforms monitor
|
|
which voltages.
|
|
|
|
This is a major problem and the box should be looked
|
|
at by a qualified Nortel representative as
|
|
soon as possible. Correct operation of the system
|
|
is not guaranteed while in this state. Certain platforms
|
|
do not supply or monitor some of these voltages.
|
|
See the Health Check section of the Admin Guide for a
|
|
description of which platforms monitor which voltages."
|
|
::= {hardwareCESTrapInfo 9}
|
|
|
|
fiveVoltsPosStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,fiveVoltsPositive, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the +5 Volt power"
|
|
::= 1009
|
|
|
|
-- Trap #10010 ---------------------------------
|
|
fiveVoltsMinus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of -5 Volt power.
|
|
Possible Values:
|
|
Alert: Voltage 5 V Minus: Voltage out of range;
|
|
|
|
The supplied voltage to the system is not within the
|
|
the specified range for that particular voltage.
|
|
Certain platforms do not supply or monitor some of
|
|
these voltages. See the Health Check section of the
|
|
Admin Guide for a description of which platforms monitor
|
|
which voltages.
|
|
|
|
This is a major problem and the box should be looked
|
|
at by a qualified Nortel representative as
|
|
soon as possible. Correct operation of the system
|
|
is not guaranteed while in this state. Certain platforms
|
|
do not supply or monitor some of these voltages.
|
|
See the Health Check section of the Admin Guide for a
|
|
description of which platforms monitor which voltages."
|
|
::= {hardwareCESTrapInfo 10}
|
|
|
|
fiveVoltsMinusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,fiveVoltsMinus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of -5 Volt power"
|
|
::= 10010
|
|
|
|
-- Trap #10011 ---------------------------------
|
|
threeVoltsPositive OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of +3 Volt power.
|
|
Possible Values:
|
|
Alert: Voltage 3.3 V Plus: Voltage out of range;
|
|
|
|
The supplied voltage to the system is not within the
|
|
the specified range for that particular voltage.
|
|
Certain platforms do not supply or monitor some of
|
|
these voltages. See the Health Check section of the
|
|
Admin Guide for a description of which platforms monitor
|
|
which voltages.
|
|
|
|
This is a major problem and the box should be looked
|
|
at by a qualified Nortel representative as
|
|
soon as possible. Correct operation of the system
|
|
is not guaranteed while in this state. Certain platforms
|
|
do not supply or monitor some of these voltages.
|
|
See the Health Check section of the Admin Guide for a
|
|
description of which platforms monitor which voltages."
|
|
::= {hardwareCESTrapInfo 11}
|
|
|
|
threeVoltsPositiveTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,threeVoltsPositive, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of +3 Volt power"
|
|
::= 10011
|
|
|
|
-- Trap #10012 ---------------------------------
|
|
twoDotFiveVA OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of 2.5VA power.
|
|
Possible Values:
|
|
Alert: Voltage 2.5 VA: Voltage out of range;
|
|
|
|
This is the voltage supplied to the primary processor.
|
|
The supplied voltage to the system is not within the
|
|
the specified range for that particular voltage.
|
|
Certain platforms do not supply or monitor some of
|
|
these voltages. See the Health Check section of the
|
|
Admin Guide for a description of which platforms monitor
|
|
which voltages.
|
|
|
|
This is a major problem and the box should be looked
|
|
at by a qualified Nortel representative as
|
|
soon as possible. Correct operation of the system
|
|
is not guaranteed while in this state. Certain platforms
|
|
do not supply or monitor some of these voltages.
|
|
See the Health Check section of the Admin Guide for a
|
|
description of which platforms monitor which voltages."
|
|
::= {hardwareCESTrapInfo 12}
|
|
|
|
twoDotFiveVATrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,twoDotFiveVA, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of 2.5VA power"
|
|
::= 10012
|
|
|
|
-- Trap #10013 ---------------------------------
|
|
twoDotFiveVB OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of 2.5VB power.
|
|
Possible Values:
|
|
Alert: Voltage 2.5 VB: Voltage out of range;
|
|
|
|
This is the voltage supplied to the seconary processor.
|
|
The supplied voltage to the system is not within the
|
|
the specified range for that particular voltage.
|
|
Certain platforms do not supply or monitor some of
|
|
these voltages. See the Health Check section of the
|
|
Admin Guide for a description of which platforms monitor
|
|
which voltages.
|
|
|
|
This is a major problem and the box should be looked
|
|
at by a qualified Nortel representative as
|
|
soon as possible. Correct operation of the system
|
|
is not guaranteed while in this state. Certain platforms
|
|
do not supply or monitor some of these voltages.
|
|
See the Health Check section of the Admin Guide for a
|
|
description of which platforms monitor which voltages."
|
|
::= {hardwareCESTrapInfo 13}
|
|
|
|
twoDotFiveVBTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,twoDotFiveVB, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of 2.5VB power"
|
|
::= 10013
|
|
|
|
-- Trap #10014 ---------------------------------
|
|
twelveVoltsPositive OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of +12 Volt power.
|
|
Possible Values:
|
|
Alert: Voltage 12 V Plus: Voltage out of range;
|
|
|
|
The supplied voltage to the system is not within the
|
|
the specified range for that particular voltage.
|
|
Certain platforms do not supply or monitor some of
|
|
these voltages. See the Health Check section of the
|
|
Admin Guide for a description of which platforms monitor
|
|
which voltages.
|
|
|
|
This is a major problem and the box should be looked
|
|
at by a qualified Nortel representative as
|
|
soon as possible. Correct operation of the system
|
|
is not guaranteed while in this state. Certain platforms
|
|
do not supply or monitor some of these voltages.
|
|
See the Health Check section of the Admin Guide for a
|
|
description of which platforms monitor which voltages."
|
|
::= {hardwareCESTrapInfo 14}
|
|
|
|
twelveVoltsPositveTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,twelveVoltsPositive, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of +12 Volt power"
|
|
::= 10014
|
|
|
|
-- Trap #10015 ---------------------------------
|
|
twelveVoltsMinus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of -12 Volt power.
|
|
Possible Values:
|
|
Alert: Voltage 12 V Minus: Voltage out of range;
|
|
|
|
The supplied voltage to the system is not within the
|
|
the specified range for that particular voltage.
|
|
Certain platforms do not supply or monitor some of
|
|
these voltages. See the Health Check section of the
|
|
Admin Guide for a description of which platforms monitor
|
|
which voltages.
|
|
|
|
This is a major problem and the box should be looked
|
|
at by a qualified Nortel representative as
|
|
soon as possible. Correct operation of the system
|
|
is not guaranteed while in this state. Certain platforms
|
|
do not supply or monitor some of these voltages.
|
|
See the Health Check section of the Admin Guide for a
|
|
description of which platforms monitor which voltages."
|
|
::= {hardwareCESTrapInfo 15}
|
|
|
|
twelveVoltsMinsTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,twelveVoltsMinus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of -12 Volt power"
|
|
::= 10015
|
|
|
|
-- Trap #10016 ---------------------------------
|
|
normalTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of normal temperature reading.
|
|
Possible Values:
|
|
Alert: Normal Temperature: Normal temperature out of range;
|
|
|
|
This indicates that the box is running above its rated
|
|
normal operating temperature. This may be the result of
|
|
an improperly working fan or a high ambient temperature.
|
|
|
|
The box is not guaranteed to run properly while running
|
|
above the normal operating temperature range. Performance
|
|
will be degraded. Not taking action to correct this
|
|
situation can result in component failure. Do not rely
|
|
on waiting for the criticalTemperatureTrap as that is
|
|
only supported by certain platforms."
|
|
::= {hardwareCESTrapInfo 16}
|
|
|
|
normalTemperatureTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,normalTemperature, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the normal temperature reading"
|
|
::= 10016
|
|
|
|
-- Trap #10017 ---------------------------------
|
|
criticalTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of critical temperature reading.
|
|
Possible Values:
|
|
Alert: Critical Temperature: Critial temperature out of range;
|
|
|
|
This indicates that the box is running at a critically high
|
|
temperature above the normal operating range. This is only
|
|
supported on certain platforms. See the Admin Guide for a
|
|
list of platforms which support this.
|
|
|
|
The box must be shut down immediately. Component failure
|
|
may already have occurred. If the reason for such a high
|
|
operating temperature cannot be determined, contact a
|
|
qualified Nortel representative."
|
|
::= {hardwareCESTrapInfo 17}
|
|
|
|
criticalTemperatureTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,criticalTemperature, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the critical temperature reading"
|
|
::= 10017
|
|
|
|
-- Trap #10018 ---------------------------------
|
|
chassisIntrusion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The chassis intrusion sensor indicates that the unit has been opened.
|
|
|
|
Possible Values:
|
|
Alert: Intrusion: Box has been opened;
|
|
|
|
The cover to the CES has been opened or is in the
|
|
process of being opened. This indicates a possible
|
|
physical security intrusion.
|
|
|
|
The system will continue to operate while the box
|
|
is opened. Check to insure that no unauthorized
|
|
persons have opened the unit."
|
|
::= {hardwareCESTrapInfo 18}
|
|
|
|
chassisIntrusionTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,chassisIntrusion, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "The chassis intrusion sensor indicates that the unit has been physically opened"
|
|
::= 10018
|
|
|
|
-- Trap #10019 ---------------------------------
|
|
dualPowerSupply OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of the redundant power supplies.
|
|
Possible Values:
|
|
Alert: Dual Power Supply: Redundant supply faulted
|
|
|
|
This indicates that, on systems with redundant power
|
|
supplies, one of the power supplies is not working.
|
|
|
|
This trap can only be sent from systems which have
|
|
redundant power supplies. The system will continue
|
|
to run with only one power supply working. A new
|
|
power supply must be obtained via an authorized
|
|
Nortel representative as quickly as possible.
|
|
This will help reduce the risk window of system failure
|
|
in the event that the working power supply ceases to
|
|
function."
|
|
::= {hardwareCESTrapInfo 19}
|
|
|
|
dualPowerSupplyTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,dualPowerSupply, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the redundant power supplies"
|
|
::= 10019
|
|
|
|
-- Trap #10020 ---------------------------------
|
|
t1WANStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of T1 WAN card(s).
|
|
Possible Values:
|
|
For Wanic support:
|
|
Alert: Invalid Device X
|
|
Warning: Device WanicX disabled
|
|
Alert: Device WanicX down
|
|
Warning: Device WanicX not initialized
|
|
Warning: Device WanicX PPP negotiating
|
|
Alert: Device WanicX PPP down
|
|
Alert: Device WanicX FR no support
|
|
Alert: Device WanicX Unknown DL
|
|
For T1:
|
|
Alert: Invalid Device X
|
|
Warning: Device LMCDTEX disabled
|
|
Alert: Device LMCDTEX down
|
|
Warning: Device LMCDTEX not initialized
|
|
For CSU/DSU:
|
|
Alert: Invalid Device X
|
|
Warning: Device LMCCDX disabled
|
|
Alert: Device LMCCDX down
|
|
Warning: Device LMCCDX not initialized"
|
|
|
|
::= {hardwareCESTrapInfo 20}
|
|
|
|
t1WANStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,
|
|
t1WANStatus,
|
|
systemName,
|
|
systemDate,
|
|
systemTime,
|
|
systemUpTime,
|
|
ifIndex, -- ifIndex of the interface.
|
|
ifDescr, -- ifDescr of the interface.
|
|
ifType -- ifType, this provides descrimination of interfaces that are tunnels.
|
|
}
|
|
DESCRIPTION "Status of T1 WAN card(s).
|
|
Possible Values:
|
|
For Wanic support:
|
|
Alert: Invalid Device X
|
|
Warning: Device WanicX disabled
|
|
Alert: Device WanicX down
|
|
Warning: Device WanicX not initialized
|
|
Warning: Device WanicX PPP negotiating
|
|
Alert: Device WanicX PPP down
|
|
Alert: Device WanicX FR no support
|
|
Alert: Device WanicX Unknown DL
|
|
For T1:
|
|
Alert: Invalid Device X
|
|
Warning: Device LMCDTEX disabled
|
|
Alert: Device LMCDTEX down
|
|
Warning: Device LMCDTEX not initialized
|
|
For CSU/DSU:
|
|
Alert: Invalid Device X
|
|
Warning: Device LMCCDX disabled
|
|
Alert: Device LMCCDX down
|
|
Warning: Device LMCCDX not initialized"
|
|
::= 10020
|
|
|
|
-- Trap #10021 ---------------------------------
|
|
t3WANStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of T3 WAN card
|
|
Possible Values:
|
|
Alert: Invalid Index X
|
|
Warning: Device HSSIX disabled
|
|
Alert: Device HSSIX down
|
|
Warning: Device HSSIX not initialized
|
|
Alert: Device HSSIX PPP down
|
|
Warning: Device HSSIX PP initializing"
|
|
::= {hardwareCESTrapInfo 21}
|
|
|
|
t3WANStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,
|
|
t3WANStatus,
|
|
systemName,
|
|
systemDate,
|
|
systemTime,
|
|
systemUpTime,
|
|
ifIndex, -- ifIndex of the interface.
|
|
ifDescr, -- ifDescr of the interface.
|
|
ifType -- ifType, this provides descrimination of interfaces that are tunnels.
|
|
}
|
|
DESCRIPTION "Status of T3 WAN card
|
|
Possible Values:
|
|
Alert: Invalid Index X
|
|
Warning: Device HSSIX disabled
|
|
Alert: Device HSSIX down
|
|
Warning: Device HSSIX not initialized
|
|
Alert: Device HSSIX PPP down
|
|
Warning: Device HSSIX PP initializing"
|
|
|
|
::= 10021
|
|
|
|
-- Trap #10022 ---------------------------------
|
|
hwAccelStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of hardware accelerator card."
|
|
::= {hardwareCESTrapInfo 22}
|
|
|
|
hwAccelTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,hwAccelStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of hardware accelerator card.
|
|
Possible Values:
|
|
Invalid hardware accelerator unit %d;
|
|
Unknown hardware accelerator unit %d;
|
|
Healthy: Bulk Accelerator in slot %d: Unit %d Status 1 - ATTACHED;
|
|
Warning: Bulk Accelerator in slot %d: Unit %d Status 2 - DISABLED;
|
|
Healthy: Bulk Accelerator in slot %d: Unit %d Status 3 - ACTIVE;
|
|
Warning: Bulk Accelerator in slot %d: Unit %d Status 4 - RECOVERING;
|
|
Warning: Bulk Accelerator in slot %d: Unit %d Status 5 - SHUTDOWN;
|
|
Alert: Bulk Accelerator in slot %d: Unit %d Status 6 - FAILED;
|
|
"
|
|
::= 10022
|
|
|
|
-- Trap #10024 ---------------------------------
|
|
v90WANStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of V.90 Interface card
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the card.
|
|
Alert: V.90 Invalid index X
|
|
Disabled: Device IntModem-X disabled
|
|
Healthy: Device IntModem-X: PPP is UP.
|
|
Alert: Device IntModem-X down
|
|
Warning: Device IntModem-X not initialized
|
|
Alert: Device IntModem-X: Call is UP. Internal Error.
|
|
Warning: Device IntModem-X is Down. Last dial-out attempt FAILED.
|
|
Healthy: Device IntModem-X is Down (No Active calls)
|
|
Warning: Device IntModem-X is in an UNKNOWN state"
|
|
::= {hardwareCESTrapInfo 24}
|
|
|
|
v90WANStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,
|
|
v90WANStatus,
|
|
systemName,
|
|
systemDate,
|
|
systemTime,
|
|
systemUpTime
|
|
}
|
|
DESCRIPTION "Status of V.90 Interface card
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the card.
|
|
Alert: V.90 Invalid index X
|
|
Disabled: Device IntModem-X disabled
|
|
Healthy: Device IntModem-X: PPP is UP.
|
|
Alert: Device IntModem-X down
|
|
Warning: Device IntModem-X not initialized
|
|
Alert: Device IntModem-X: Call is UP. Internal Error.
|
|
Warning: Device IntModem-X is Down. Last dial-out attempt FAILED.
|
|
Healthy: Device IntModem-X is Down (No Active calls)
|
|
Warning: Device IntModem-X is in an UNKNOWN state
|
|
"
|
|
::= 10024
|
|
|
|
-- Trap #10025 ---------------------------------
|
|
briWANStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of ISDN BRI Interface card
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the card.
|
|
Alert: BRI Invalid index X
|
|
Alert: Device BRI-X not Responding. Needs Host Reboot.
|
|
Disabled: Device BRI-X disabled
|
|
Alert: Device BRI-X down
|
|
Warning: Device BRI-X not initialized
|
|
Healthy: Device BRI-X: PPP is UP.
|
|
Alert: Device BRI-X: Call is UP. Internal Error.
|
|
Warning: Device BRI-X is Down. Last dial-out attempt FAILED.
|
|
Healthy: Device BRI-X is Down (No Active calls)
|
|
Alert: Device BRI-X is in an UNKNOWN state"
|
|
::= {hardwareCESTrapInfo 25}
|
|
|
|
briWANStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,
|
|
briWANStatus,
|
|
systemName,
|
|
systemDate,
|
|
systemTime,
|
|
systemUpTime
|
|
}
|
|
DESCRIPTION "Status of V.90 Interface card
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the card.
|
|
Alert: BRI Invalid index X
|
|
Alert: Device BRI-X not Responding. Needs Host Reboot.
|
|
Disabled: Device BRI-X disabled
|
|
Alert: Device BRI-X down
|
|
Warning: Device BRI-X not initialized
|
|
Healthy: Device BRI-X: PPP is UP.
|
|
Alert: Device BRI-X: Call is UP. Internal Error.
|
|
Warning: Device BRI-X is Down. Last dial-out attempt FAILED.
|
|
Healthy: Device BRI-X is Down (No Active calls)
|
|
Alert: Device BRI-X is in an UNKNOWN state
|
|
"
|
|
::= 10025
|
|
|
|
-- Trap #10026 ---------------------------------
|
|
serUartStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Serial (COM) port/interface
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the serial interface
|
|
Alert: COM port Invalid index X
|
|
Healthy: Device COMX is set for Serial Menu.
|
|
Disabled: Device COMX disabled
|
|
Warning: Device COMX not initialized
|
|
Healthy: Device COMX: PPP is UP.
|
|
Alert: Device COMX: Call is UP. Internal Error.
|
|
Warning: Device COMX is Down. Last dial-out attempt FAILED.
|
|
Healthy: Device COMX is Down (No Active calls)
|
|
Alert: Device COMX is in an UNKNOWN state"
|
|
::= {hardwareCESTrapInfo 26}
|
|
|
|
serUartStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,
|
|
serUartStatus,
|
|
systemName,
|
|
systemDate,
|
|
systemTime,
|
|
systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Serial (COM) port/interface
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the serial interface
|
|
Alert: COM port Invalid index X
|
|
Healthy: Device COMX is set for Serial Menu.
|
|
Disabled: Device COMX disabled
|
|
Warning: Device COMX not initialized
|
|
Healthy: Device COMX: PPP is UP.
|
|
Alert: Device COMX: Call is UP. Internal Error.
|
|
Warning: Device COMX is Down. Last dial-out attempt FAILED.
|
|
Healthy: Device COMX is Down (No Active calls)
|
|
Alert: Device COMX is in an UNKNOWN state
|
|
"
|
|
::= 10026
|
|
|
|
-- Trap #10027 ---------------------------------
|
|
adslWANStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of ADI ADSL card
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the serial interface
|
|
Alert: Invalid index X
|
|
Alert: Device ADIADSLX off line
|
|
Disabled: Device ADIADSLX disabled
|
|
Alert: Device ADIADSLX down
|
|
Warning: Device ADIADSLX not initialized
|
|
Healthy: Device ADIADSLX up"
|
|
::= {hardwareCESTrapInfo 27}
|
|
|
|
adslWANStatusTrap TRAP-TYPE
|
|
ENTERPRISE hardwareCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,
|
|
adslWANStatus,
|
|
systemName,
|
|
systemDate,
|
|
systemTime,
|
|
systemUpTime
|
|
}
|
|
DESCRIPTION "Status of ADI ADSL card
|
|
Possible Values:
|
|
Please note that X corresponds to the unit number of the serial interface
|
|
Alert: Invalid index X
|
|
Alert: Device ADIADSLX off line
|
|
Disabled: Device ADIADSLX disabled
|
|
Alert: Device ADIADSLX down
|
|
Warning: Device ADIADSLX not initialized
|
|
Healthy: Device ADIADSLX up
|
|
"
|
|
::= 10027
|
|
|
|
-- Server related Traps
|
|
|
|
serverCESTrapInfo OBJECT IDENTIFIER
|
|
::= {contivity 2}
|
|
|
|
-- Trap #3001 ---------------------------------
|
|
radiusAcctServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of External Radius Accounting Server.
|
|
Possible Values:
|
|
Warning: RADIUS Accounting Server: Server not configured
|
|
Alert: RADIUS Accounting Server: Error
|
|
Alert: RADIUS Accounting Server: Not Configured
|
|
"
|
|
::= {serverCESTrapInfo 1}
|
|
|
|
radiusAcctServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,radiusAcctServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of External Radius Accounting Server"
|
|
::= 3001
|
|
|
|
-- Trap #3002 ---------------------------------
|
|
backupServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of External Disk Backup Server.
|
|
Possible Values:
|
|
Warning: Auto Backup Servers: Server not configured.
|
|
Warning: Auto Backup Servers: Can't backup to xxx yyy zzz
|
|
Alert: Auto Backup Servers: Can't backup to xxx yyy zzz
|
|
|
|
Can't backup to xxx yyy zzz is issued as an alert
|
|
when none of the servers can be reached.
|
|
"
|
|
::= {serverCESTrapInfo 2}
|
|
|
|
backupServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,backupServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of External Disk Backup Server"
|
|
::= 3002
|
|
|
|
-- Trap #3003 ---------------------------------
|
|
diskRedundency OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Local Disk Redundency.
|
|
Possible Values:
|
|
Alert: Disk Redundancy: Not Configured
|
|
Alert: Disk Redundancy: Error
|
|
"
|
|
::= {serverCESTrapInfo 3}
|
|
|
|
diskRedundencyTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,diskRedundency, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Local Disk Redundency"
|
|
::= 3003
|
|
|
|
-- Trap #3004 ---------------------------------
|
|
intLDAPServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Internal LDAP Server.
|
|
Possible Values:
|
|
Warning : Internal LDAP Server : Restore in progress
|
|
Alert : Internal LDAP Server : Server is down
|
|
"
|
|
::= {serverCESTrapInfo 4}
|
|
|
|
intLDAPServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,intLDAPServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Internal LDAP Server"
|
|
::= 3004
|
|
|
|
-- Trap #3005 ---------------------------------
|
|
loadBalancingServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Load Balancing Server.
|
|
Possible Values:
|
|
Disabled: Load Balancing Service: Server not enabled;
|
|
Warning: Load Balancing Service: Timed out waiting for response from server;
|
|
"
|
|
::= {serverCESTrapInfo 5}
|
|
|
|
loadBalancingServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,loadBalancingServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Load Balancing Server"
|
|
::= 3005
|
|
|
|
-- Trap #3006 ---------------------------------
|
|
dnsServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of DNS Server.
|
|
Possible Values:
|
|
Warning: DNS Servers : Error
|
|
Warning: DNS Servers : Operational
|
|
Alert: DNS Servers : Configured
|
|
Alert: DNS Servers : Error
|
|
|
|
The values have the following meaning:
|
|
Warning: DNS Servers : Error -- SysInitCls::InitComplete failed
|
|
Warning: DNS Servers : Operational -- At least one of the servers is reachable
|
|
Alert: DNS Servers : Configured -- All servers configured, but none are reachable.
|
|
Alert: DNS Servers : Error --
|
|
"
|
|
::= {serverCESTrapInfo 6}
|
|
|
|
dnsServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,dnsServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of DNS Server"
|
|
::= 3006
|
|
|
|
-- Trap #3007 ---------------------------------
|
|
snmpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of SNMP Server.
|
|
Possible Values:
|
|
Warning: SNMP Servers : Error
|
|
Warning: SNMP Servers : Can't reach xxx.xxx.xxx.xxx or yyy.yyy.yyy.yyy
|
|
Alert: SNMP Servers : Error
|
|
|
|
The values have the following meaning:
|
|
Warning: SNMP Servers : Error -- SysInitCls::InitComplete failed
|
|
Alert: SNMP Servers : Error -- AT least one server configured, but none are reachable.
|
|
"
|
|
|
|
::= {serverCESTrapInfo 7}
|
|
|
|
snmpServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,snmpServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of SNMP Server"
|
|
::= 3007
|
|
|
|
-- Trap #3008 ---------------------------------
|
|
ipAddressPool OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of the IP address pool.
|
|
Possible Values:
|
|
Warning: IP Address Pool : Reserved address count is low.
|
|
Warning: IP Address Pool : DHCP server(s) unavailable
|
|
Alert: IP Address Pool : Server is down
|
|
Alert: IP Address Pool : Not Configured
|
|
Alert: IP Address Pool : No IP address available.
|
|
Alert: IP Address Pool : Reserved address count is low.
|
|
Alert: IP Address Pool : Associated system task failed.
|
|
Alert: IP Address Pool : Server not configured
|
|
Alert: IP Address Pool : Error
|
|
|
|
|
|
The values have the following meaning:
|
|
Warning: IP Address Pool : Reserved address count is low. -- Haven't hit desired cache size yet.
|
|
Alert: IP Address Pool : Server is down -- SysInitCls::InitComplete failed
|
|
Alert: IP Address Pool : Not Configured -- Task failed sanity check.
|
|
Alert: IP Address Pool : No IP address available. -- No addresses in BOUND state.
|
|
Alert: IP Address Pool : Associated system task failed.
|
|
Alert: IP Address Pool : Server not configured
|
|
Alert: IP Address Pool : Error
|
|
"
|
|
::= {serverCESTrapInfo 8}
|
|
|
|
ipAddressPoolTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,ipAddressPool, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of the IP address pool"
|
|
::= 3008
|
|
|
|
-- Trap #3009 ---------------------------------
|
|
extLDAPServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of External LDAP Server.
|
|
Possible Values:
|
|
Warning: External LDAP Servers : Server is down
|
|
Alert: External LDAP Servers : Server is down
|
|
|
|
The values have the following meaning:
|
|
Warning: External LDAP Servers : Server is down -- One server is down
|
|
Alert: External LDAP Servers : Server is down -- All servers are down
|
|
"
|
|
::= {serverCESTrapInfo 9}
|
|
|
|
extLDAPServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,extLDAPServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of External LDAP Server"
|
|
::= 3009
|
|
|
|
-- Trap #30010 ---------------------------------
|
|
radiusAuthServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Radius Authentication Server.
|
|
Possible Values:
|
|
Warning: RADIUS Authentication Servers : Error
|
|
Alert: RADIUS Authentication Servers : Error
|
|
|
|
The values have the following meaning:
|
|
Warning: RADIUS Authentication Servers : Error -- At least one server is available
|
|
Alert: RADIUS Authentication Servers : Error -- No servers are available
|
|
"
|
|
::= {serverCESTrapInfo 10}
|
|
|
|
radiusAuthServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,radiusAuthServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Radius Authentication Server"
|
|
::= 30010
|
|
|
|
|
|
-- Trap #30011 ---------------------------------
|
|
certificateServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Certificates Validity.
|
|
Possible Values:
|
|
Alert: Certificates Validity: All certificates are going to expire/expired;
|
|
Warning: Certificates Validity: One/more certificate is invalid;
|
|
Disabled: Certificates Validity: No certificate defined;
|
|
"
|
|
::= {serverCESTrapInfo 11}
|
|
|
|
certificateServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,certificateServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Certificates Validity
|
|
Possible Values:
|
|
Healthy: Certificates Validity: Operational;
|
|
Alert: Certificates Validity: All certificates are going to expire/expired;
|
|
Warning: Certificates Validity: One/more certificate is invalid;
|
|
Disabled: Certificates Validity: No certificate defined;
|
|
"
|
|
::= 30011
|
|
|
|
-- Trap #30012 ---------------------------------
|
|
extLDAPAuthServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of External LDAP Authentication Server.
|
|
Possible Values:
|
|
Warning: External LDAP Authentication Server: Server is down(indicates at least one server is not reachable and at least one server is reachable);
|
|
Alert: External LDAP Authentication Server: Server is down(indicates all servers are not reachable);
|
|
"
|
|
::= {serverCESTrapInfo 12}
|
|
|
|
extLDAPAuthServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,certificateServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of External LDAP Authentication Server.
|
|
Possible Values:
|
|
Warning: External LDAP Authentication Server: Server is down(indicates at least one server is not reachable and at least one server is reachable);
|
|
Alert: External LDAP Authentication Server: Server is down(indicates all servers are not reachable);
|
|
"
|
|
::= 30012
|
|
|
|
-- Trap #30013 ---------------------------------
|
|
cmpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of CMP Server.
|
|
Possible Values:
|
|
One/more Certificate Requests error: there is at least one request error;
|
|
One/more Certificate Requests processing: there is at least one request in processing;
|
|
No Certificate Requests submitted: there is no request sent;
|
|
"
|
|
::= {serverCESTrapInfo 13}
|
|
|
|
cmpServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, cmpServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of CMP Server.
|
|
Possible Values:
|
|
One/more Certificate Requests error: there is at least one request error;
|
|
One/more Certificate Requests processing: there is at least one request in processing;
|
|
No Certificate Requests submitted: there is no request sent;
|
|
"
|
|
::= 30013
|
|
|
|
-- Trap #30014 ---------------------------------
|
|
dhcpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of DHCP Server.
|
|
Possible Values:
|
|
Disabled: DHCP Server is Disabled
|
|
Alert: DHCP Server is NOT configured
|
|
Alert: DHCP Server is configured and operational, Using backup config
|
|
Alert: No IP Address available for subnet
|
|
Alert: DHCP Server is configured and server is DOWN
|
|
Healthy: DHCP Server is Operational
|
|
Warning: Subnet low on IP Addresses
|
|
Warning: DHCP Server Initializing
|
|
Warning: DHCP Server is Enabled, but status Unknown cannot be determined
|
|
"
|
|
::= {serverCESTrapInfo 14}
|
|
|
|
dhcpServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, dhcpServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of DHCP Server
|
|
Possible Values:
|
|
Disabled: DHCP Server is Disabled
|
|
Alert: DHCP Server is NOT configured
|
|
Alert: DHCP Server is configured and operational, Using backup config
|
|
Alert: No IP Address available for subnet
|
|
Alert: DHCP Server is configured and server is DOWN
|
|
Healthy: DHCP Server is Operational
|
|
Warning: Subnet low on IP Addresses
|
|
Warning: DHCP Server Initializing
|
|
Warning: DHCP Server is Enabled, but status Unknown cannot be determined
|
|
"
|
|
::= 30014
|
|
|
|
-- Trap #30015 ---------------------------------
|
|
sshServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION " Status of SSH Server.
|
|
Possible Values:
|
|
Disabled : -- SSH Server is Disabled
|
|
Healthy : -- SSH Server is Operational
|
|
Warning : -- SSH Server is Restarting
|
|
Warning : -- SSH Server is Initializing
|
|
Warning : -- SSH Server is Unknown
|
|
Alert : -- SSH Server is Down
|
|
"
|
|
::= {serverCESTrapInfo 15}
|
|
|
|
sshServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, sshServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of SSH Server.
|
|
"
|
|
::= 30015
|
|
|
|
-- Trap #30016 ---------------------------------
|
|
ntpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of NTP Server.
|
|
Possible Values:
|
|
Disabled : -- NTP server is globally disabled.
|
|
Healthy : -- NTP server operational.
|
|
Warning : -- Frequency correction.
|
|
Warning : -- Frenquncy set.
|
|
Warning : -- Time set.
|
|
Warning : -- Spike detected.
|
|
Warning : -- Clock synchronized.
|
|
Warning : -- NTP initialized - not synchronized.
|
|
Warning : -- Clock never set.
|
|
"
|
|
::= {serverCESTrapInfo 16}
|
|
|
|
ntpServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, ntpServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of NTP Server.
|
|
|
|
"
|
|
::= 30016
|
|
|
|
|
|
-- Trap #30017 ---------------------------------
|
|
ospfServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of OSPF Server.
|
|
Possible Values:
|
|
Disabled : -- OSPF is globally disabled
|
|
Warning : -- OSPF tunnel local addr A.B.C.D remote addr A.B.C.D is DOWN
|
|
Warning : -- OSPF interface A.B.C.D is DOWN
|
|
Alert : -- No connection to Routing Table Manager
|
|
Alert : -- No connection to Routing Policy Service
|
|
Healthy : -- Operational
|
|
"
|
|
::= {serverCESTrapInfo 17}
|
|
|
|
ospfServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, ospfServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of OSPF Server.
|
|
|
|
"
|
|
::= 30017
|
|
|
|
|
|
-- Trap #30018 ---------------------------------
|
|
clipServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Circuitless IP.
|
|
Possible Values:
|
|
Disabled : -- CLIP is Disabled
|
|
Healthy : -- CLIP is operational
|
|
"
|
|
::= {serverCESTrapInfo 18}
|
|
|
|
clipServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, clipServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Circuitless IP.
|
|
|
|
"
|
|
::= 30018
|
|
|
|
|
|
|
|
-- Trap #30019 ---------------------------------
|
|
dhcprelayServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of DHCP Relay Server.
|
|
Possible Values:
|
|
Alert : -- DHCP Relay requires reboot to start
|
|
Alert : -- DHCP Relay task does not exist
|
|
Alert : -- DHCP Relay task is suspended
|
|
Healthy : -- DHCP Relay is up
|
|
"
|
|
::= {serverCESTrapInfo 19}
|
|
|
|
dhcprelayServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, dhcprelayServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of DHCP Relay Server.
|
|
|
|
"
|
|
::= 30019
|
|
|
|
|
|
-- Trap #30020 ---------------------------------
|
|
gdsServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Global Demand Services Services.
|
|
Possible Values:
|
|
Healthy : -- Global Demand Services operational.
|
|
Disabled : -- Global Demand Services disabled.
|
|
|
|
"
|
|
::= {serverCESTrapInfo 20}
|
|
|
|
gdsServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, gdsServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Global Demand Services Services.
|
|
"
|
|
::= 30020
|
|
|
|
|
|
-- Trap #30021 ---------------------------------
|
|
demandintfServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Demand Interface.
|
|
Possible Values:
|
|
Healthy : -- Demand Interface Connected.
|
|
Healthy : -- Demand Interface Connecting.
|
|
Healthy : -- Demand Interface Activated.
|
|
Healthy : -- Demand Interface Idle.
|
|
Disabled : -- Demand Interface Disabled.
|
|
|
|
"
|
|
::= {serverCESTrapInfo 21}
|
|
|
|
demandintfServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, demandintfServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Demand Interface.
|
|
|
|
"
|
|
::= 30021
|
|
|
|
|
|
-- Trap #30022 ---------------------------------
|
|
crlServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of CRL Server.
|
|
Possible Values:
|
|
Healthy : -- All Certificates are Valid
|
|
Alert : -- One/more certificate is expired
|
|
Warning : -- One/more certificate is going to expire
|
|
Warning : -- Duplicate CA certs detected on the switch.
|
|
Disabled : -- No certificate defined
|
|
|
|
"
|
|
::= {serverCESTrapInfo 22}
|
|
|
|
crlServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, crlServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of CRL Server.
|
|
|
|
"
|
|
::= 30022
|
|
|
|
|
|
-- Trap #30023 ---------------------------------
|
|
ocspServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of OCSP Server.
|
|
Possible Values:
|
|
Disabled : -- No OCSP server configured
|
|
Alert : -- All OCSP servers are down. Cert:%s
|
|
Warning : -- At least one server is down. Cert:%s
|
|
Warning : -- OCSP is enabled but not configured. Cert:%s
|
|
Healthy : -- All servers are up
|
|
|
|
"
|
|
::= {serverCESTrapInfo 23}
|
|
|
|
ocspServerTrap TRAP-TYPE
|
|
ENTERPRISE serverCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, ocspServer, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of OCSP Server.
|
|
|
|
"
|
|
::= 30023
|
|
|
|
-- Software related Traps
|
|
|
|
serviceCESTrapInfo OBJECT IDENTIFIER
|
|
::= {contivity 3}
|
|
|
|
-- Trap #5001 ---------------------------------
|
|
netBuffers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Network buffer usage.
|
|
Possible Values:
|
|
Warning: Buffer Usage : Utilization exceeds 75%
|
|
Alert: Buffer Usage : Utilization exceeds 87.5%
|
|
"
|
|
::= {serviceCESTrapInfo 1}
|
|
|
|
netBuffersTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,netBuffers, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Network buffer usage"
|
|
::= 5001
|
|
|
|
-- Trap #5002 ---------------------------------
|
|
fireWall OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of internal firewall.
|
|
Possible Values:
|
|
Disabled: Firewall: Firewall disabled;
|
|
Disabled: Firewall: Firewall stopped;
|
|
Warning: Firewall: Current Firewall is %s. Reboot is required to start %s;
|
|
Warning: Firewall: Firewall state is not known!;
|
|
Warning: Firewall: Daemon loading policy;
|
|
Alert: Firewall: Firewall requires reboot to start;
|
|
Alert: Firewall: Daemon task does not exist;
|
|
Alert: Firewall: Daemon task is suspended;
|
|
|
|
The values have the following meaning:
|
|
-- The first two possible values are common to all firewalls.
|
|
Disabled: Firewall: Firewall disabled;
|
|
Warning: Firewall: Current Firewall is %s. Reboot is required to start %s;
|
|
-- The firewall type (Contivity / CheckPoint) has been changed, but for it
|
|
-- to take effect, the VPN Router must be restarted.
|
|
|
|
-- Contivity Firewall specific values.
|
|
Warning: Firewall: Firewall state is not known!; -- The Contivity firewall's
|
|
-- state cannot be determined.
|
|
|
|
-- CheckPoint Firewall specific values.
|
|
Disabled: Firewall: Firewall stopped;
|
|
Warning: Firewall: Daemon loading policy;
|
|
Alert: Firewall: Firewall requires reboot to start;
|
|
Alert: Firewall: Daemon task does not exist;
|
|
Alert: Firewall: Daemon task is suspended;
|
|
"
|
|
::= {serviceCESTrapInfo 2}
|
|
|
|
fireWallTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,fireWall, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of internal firewall"
|
|
::= 5002
|
|
|
|
-- Trap #5003 ---------------------------------
|
|
fipsStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of FIPS.
|
|
Possible Values:
|
|
Warning: FIPS: Random generator test failed;
|
|
Warning: FIPS: DESMAC check on executables Failed;
|
|
Warning: FIPS: DES KAT Test Failed;
|
|
Warning: FIPS: SHA1 Self Test Failed;
|
|
Alert: FIPS: status not known;"
|
|
::= {serviceCESTrapInfo 3}
|
|
|
|
fipsStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,fipsStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of FIPS"
|
|
::= 5003
|
|
|
|
-- Trap #5004 ---------------------------------
|
|
licensingStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of temporary SW Licenses.
|
|
Possible Values:
|
|
Warning: Licensing: Temporary key will expire within 5 days;
|
|
Alert: Licensing: Temporary key has expired;"
|
|
::= {serviceCESTrapInfo 4}
|
|
|
|
licensingStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,licensingStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status temporary SW Licenses"
|
|
::= 5004
|
|
|
|
-- Trap #5005 ---------------------------------
|
|
natStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Network Address Translator.
|
|
Possible Values:
|
|
Disabled: NAT: NAT disabled;
|
|
Warning: NAT: Reboot is required to start Interface NAT;
|
|
Warning: NAT: NAT state is not known!;
|
|
Alert: NAT: All Addresses in the Address Translation pool are used;
|
|
Alert: NAT: LDAP policy parse failed - Using system default policy;
|
|
The values have the following meaning:
|
|
-- The first two possible values are common to all firewalls.
|
|
Disabled: NAT: NAT disabled; Existing NAT sessions are not deleted, but
|
|
-- no new address bindings are created for Interface NAT. Branch Office NAT
|
|
-- is not affected.
|
|
Warning: NAT: Reboot is required to start Interface NAT;
|
|
-- To take effect, the VPN Router must be restarted.
|
|
"
|
|
::= {serviceCESTrapInfo 5}
|
|
|
|
natStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,natStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Network Address Translator"
|
|
::= 5005
|
|
|
|
-- Trap #5006 ---------------------------------
|
|
antiSpoofingStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Anti Spoofing Feature.
|
|
Possible Values:
|
|
Disabled: Anti-Spoofing is Disabled;
|
|
Warning: Anti-Spoofing : Packets Dropped;
|
|
Alert: Anti-Spoofing state not known!;
|
|
The values have the following meaning:
|
|
-- The first means the feature is disabled
|
|
-- The second means packets were dropped due to a detected spoofed address
|
|
-- The third should never happen, but means the status has been set to a bogus value.
|
|
"
|
|
::= {serviceCESTrapInfo 6}
|
|
|
|
antiSpoofingStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, antiSpoofingStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Anti Spoofing Feature"
|
|
::= 5006
|
|
|
|
-- Trap #5007 ---------------------------------
|
|
sslVpnStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of SSL-VPN Accelerator.
|
|
Possible Values:
|
|
Disabled: Disabled -- The unit is administrativley disabled.
|
|
Disabled: HW not installed -- There is no SSL-VPN Accelerator installed.
|
|
Warning: Initialization in progress. -- The unit is being Initialized.
|
|
Warning: Configuration Errors - see eventlog for details.
|
|
Healthy: Operational -- The unit is Operational.
|
|
Alert: Unreachable: Error Comminicating with SSL-VPN
|
|
"
|
|
::= {serviceCESTrapInfo 7}
|
|
|
|
sslVpnStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, sslVpnStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of SSL-VPN Accelerator"
|
|
::= 5007
|
|
|
|
|
|
|
|
-- Trap #5008 ---------------------------------
|
|
usrIpAddrStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of User Ip Address Pool server.
|
|
Possible Values:
|
|
Alert : -- Server is down.
|
|
Alert : -- Object not found.
|
|
Alert : -- Server Not Configured.
|
|
Alert : -- No IP address available.
|
|
Warning : -- Reserved address count is low.
|
|
Healthy : -- User Ip Address Pool operational.
|
|
Alert : -- Associated system task failed.
|
|
Warning : -- No DHCP Pool selected for any group/subgroup.
|
|
Warning : -- DHCP server(s) unavailable.
|
|
Healthy : -- Local pool: %s;
|
|
Healthy : -- DHCP pool: %s;
|
|
Healthy : -- All User IP Pools are under quota exhausted.
|
|
Alert : -- At least one User IP Pool exceeds %d percent
|
|
"
|
|
::= {serviceCESTrapInfo 8}
|
|
|
|
usrIpAddrStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, usrIpAddrStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of User Ip Address Pool server"
|
|
::= 5008
|
|
|
|
|
|
-- Trap #5009 ---------------------------------
|
|
vrrpStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of VRRP Server.
|
|
Possible Values:
|
|
Disabled : -- VRRP is globally disabled
|
|
Alert : -- Configuration errors -- see syslog for details
|
|
Warning : -- LDAP has changed -- see syslog for details
|
|
Healthy : -- VRRP is operational
|
|
"
|
|
::= {serviceCESTrapInfo 9}
|
|
|
|
vrrpStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, vrrpStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of VRRP Server"
|
|
::= 5009
|
|
|
|
|
|
-- Trap #50010 ---------------------------------
|
|
mcastRelayStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Multicast Relay.
|
|
Possible Values:
|
|
Warning : -- Multicast Relay Not Initialized
|
|
Disabled : -- Multicast Relay is Globally Disabled
|
|
Alert : -- RPS Reg Blocked
|
|
Healthy : -- Multicast Relay is operational
|
|
"
|
|
::= {serviceCESTrapInfo 10}
|
|
|
|
mcastRelayStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, mcastRelayStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Multicast Relay"
|
|
::= 50010
|
|
|
|
-- Trap #50011 ---------------------------------
|
|
dlswStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of DLSW Server.
|
|
Possible Values:
|
|
Healthy : -- DLSw local peer enabled
|
|
Disabled : -- DLSw local peer disabled
|
|
Disabled : -- DLSw feature disabled
|
|
Disabled : -- No DLSw local peer defined
|
|
|
|
"
|
|
::= {serviceCESTrapInfo 11}
|
|
|
|
dlswStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, dlswStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of DLSW Server"
|
|
::= 50011
|
|
|
|
-- Trap #50012 ---------------------------------
|
|
ipsecFailoverStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of IPsec Failover service.
|
|
Possible Values:
|
|
Disabled : -- Failover service disabled
|
|
Healthy : -- Failover service operational
|
|
Alert : -- Failover service not initialized
|
|
"
|
|
::= {serviceCESTrapInfo 12}
|
|
|
|
ipsecFailoverStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, ipsecFailoverStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of IPsec Failover service"
|
|
::= 50012
|
|
|
|
-- Trap #50013 ---------------------------------
|
|
tunnelGuardStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of TunnelGuard.
|
|
Possible Values:
|
|
Disabled : -- Tunnelguard Disabled
|
|
Healthy : -- Tunnelguard Operational
|
|
Alert : -- Fatal error encountered during tunnelguard processing
|
|
Warning : -- Tunnelguard state unknown!
|
|
"
|
|
::= {serviceCESTrapInfo 13}
|
|
|
|
tunnelGuardStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, tunnelGuardStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of TunnelGuard"
|
|
::= 50013
|
|
|
|
-- Trap #50014 ---------------------------------
|
|
ripStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of RIP Server.
|
|
Possible Values:
|
|
Warning : -- Rip Not Initalized
|
|
Disabled : -- Rip is Globally Disabled
|
|
Alert : -- RTM Open Blocked
|
|
Alert : -- RPS Reg Blocked
|
|
Healthy : -- RIP is operational
|
|
"
|
|
::= {serviceCESTrapInfo 14}
|
|
|
|
ripStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, ripStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of RIP Server"
|
|
::= 50014
|
|
|
|
-- Trap #50015 ---------------------------------
|
|
routePolicyStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Route Policy.
|
|
Possible Values:
|
|
Disable : -- Routing Policy Server disabled.
|
|
Alert : -- Routing Policy Server requires reboot to start.
|
|
Alert : -- Routing Policy Server task does not exist.
|
|
Alert : -- Routing Policy Server task is suspended.
|
|
Healthy : -- Routing Policy Server is up.
|
|
"
|
|
::= {serviceCESTrapInfo 15}
|
|
|
|
routePolicyStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, routePolicyStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Route Policy"
|
|
::= 50015
|
|
|
|
-- Trap #50016 ---------------------------------
|
|
cRoutesMStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of Client Routes Marshaler.
|
|
Possible Values:
|
|
Alert : -- ClientRoutesMarshaler does not exist!!!
|
|
Warning : -- ClientRoutesMarshaler's task cannot be verified!
|
|
Disabled: -- ClientRoutesMarshaler is disabled.
|
|
Healthy : -- ClientRoutesMarshaler is UP.
|
|
"
|
|
::= {serviceCESTrapInfo 16}
|
|
|
|
cRoutesMStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, cRoutesMStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of Client Routes Marshaler"
|
|
::= 50016
|
|
|
|
-- Trap #50017 ---------------------------------
|
|
igmpStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Status of IGMP Server.
|
|
Possible Values:
|
|
Disabled : -- IGMP is not initialized
|
|
Warning : -- IGMP(CMS) is not initialized
|
|
Warning : -- No Upstream interface is up
|
|
Alert : -- No downstream interface is up
|
|
Healthy : -- IGMP is operational
|
|
"
|
|
::= {serviceCESTrapInfo 17}
|
|
|
|
igmpStatusTrap TRAP-TYPE
|
|
ENTERPRISE serviceCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel, igmpStatus, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Status of IGMP Server"
|
|
::= 50017
|
|
|
|
|
|
-- Login related Traps
|
|
|
|
loginCESTrapInfo OBJECT IDENTIFIER
|
|
::= {contivity 4}
|
|
|
|
-- Trap #101 ---------------------------------
|
|
failedLogin OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Failed Login Attempt.
|
|
Possible Values:
|
|
Failed Login Attempt: Username=IPSEC Encrypted: Date/Time=(xx) ;
|
|
Failed Login Attempt: Username=(userid): Date/Time=(xx) ;
|
|
Failed Login Attempt. Invalid Account: Username=(userid): Date/Time=(xx) ;
|
|
Failed Remote Network Login: Username=(userid): Date/Time=(xx) ;
|
|
Failed Remote Application Login: Username=(userid): Date/Time=(xx) ;
|
|
|
|
The values have the following meaning:
|
|
--(userid) is a place holder for the actual userid of the person or branch office
|
|
--trying to login.
|
|
--(xx) is a place holder for the date and time string.
|
|
"
|
|
::= {loginCESTrapInfo 1}
|
|
|
|
failedLoginTrap TRAP-TYPE
|
|
ENTERPRISE loginCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,failedLogin, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Failed Login Attempt"
|
|
::= 101
|
|
|
|
-- Intrusion related Traps
|
|
|
|
intrusionCESTrapInfo OBJECT IDENTIFIER
|
|
::= {contivity 5}
|
|
|
|
-- Trap #201 ---------------------------------
|
|
securityIntrusion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Security Intrusion.
|
|
Possible Values:
|
|
Intruder: : Source: %s, Destination: %s;
|
|
"
|
|
::= {intrusionCESTrapInfo 1}
|
|
|
|
securityIntrusionTrap TRAP-TYPE
|
|
ENTERPRISE intrusionCESTrapInfo
|
|
VARIABLES {
|
|
severityLevel,securityIntrusion, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Security Intrusion"
|
|
::= 201
|
|
|
|
-- System related Traps
|
|
|
|
-- Trap #401 ---------------------------------
|
|
powerUpTrap OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "Power Up.
|
|
Possible Values:
|
|
Cold Start
|
|
"
|
|
::= {contivity 6}
|
|
|
|
powerUpTrapEntry TRAP-TYPE
|
|
ENTERPRISE contivity
|
|
VARIABLES {
|
|
severityLevel,powerUpTrap, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Power Up"
|
|
::= 401
|
|
|
|
-- Trap #601 ---------------------------------
|
|
periodicHeartbeat OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Periodic Heartbeat.
|
|
Possible Values:
|
|
Has been executed n times
|
|
"
|
|
::= {contivity 12}
|
|
|
|
periodicHeartbeatTrap TRAP-TYPE
|
|
ENTERPRISE contivity
|
|
VARIABLES {
|
|
severityLevel,periodicHeartbeat, systemName,systemDate, systemTime, systemUpTime
|
|
}
|
|
DESCRIPTION "Periodic Heartbeat"
|
|
::= 601
|
|
|
|
-- SNMP Agent related Traps
|
|
|
|
snmpAgentTrapInfo-ces OBJECT IDENTIFIER
|
|
::= {contivity 14}
|
|
|
|
-- coldStart ---------------------------------
|
|
coldStart TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
-- VARIABLES { }
|
|
DESCRIPTION
|
|
"A coldStart trap signifies that the SNMPv2 entity, acting
|
|
in an agent role, is reinitializing itself and that its
|
|
configuration may have been altered."
|
|
::= 0
|
|
|
|
snmpAgentInterfaceInfo-ces OBJECT IDENTIFIER
|
|
::= {snmpAgentTrapInfo-ces 2}
|
|
|
|
ifReasonForStatus-ces OBJECT-TYPE
|
|
SYNTAX IfReasonForStatus-ces
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The reason for the status change. These include:
|
|
unknown(1) -- the reason could not be determined.
|
|
timed-out(2) -- connection(tunnel) timed out.
|
|
"
|
|
::= {snmpAgentInterfaceInfo-ces 1}
|
|
|
|
ifPhysLocation-ces OBJECT-TYPE
|
|
SYNTAX PortLocation-ces
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical location of the port. This has the values of
|
|
motherBoardOrSlot0, slot1, slot2, slot3, slot4, slot5."
|
|
::= {snmpAgentInterfaceInfo-ces 2}
|
|
|
|
ifPhysRelPos-ces OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The relative position of the physical port at the
|
|
location defined by interfacePhysLocation."
|
|
::= {snmpAgentInterfaceInfo-ces 3}
|
|
|
|
ifIpAddr-ces OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "For physical ports this is the associated IP address.
|
|
For a tunnel connection it is the local IP address."
|
|
::= { snmpAgentInterfaceInfo-ces 4}
|
|
|
|
ifName-ces OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The name of the interface, same as ifName."
|
|
::= {snmpAgentInterfaceInfo-ces 5}
|
|
|
|
ifTunnelRemoteIpAddr-ces OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The remote IP address of a tunnel connection."
|
|
::= { snmpAgentInterfaceInfo-ces 6}
|
|
|
|
-- linkDown ---------------------------------
|
|
linkDown TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
VARIABLES { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, ifType,
|
|
ifReasonForStatus-ces, ifPhysLocation-ces, ifPhysRelPos-ces,
|
|
ifIpAddr-ces, ifName-ces, ifTunnelRemoteIpAddr-ces,
|
|
sysObjectID, sysName }
|
|
DESCRIPTION
|
|
"A linkDown trap signifies that the sending
|
|
protocol entity recognizes a failure in one of
|
|
the communication links represented in the
|
|
agent's configuration.
|
|
Varbind list:
|
|
ifIndex -- ifIndex of the interface.
|
|
ifAdminStatus -- ifAdminStatus of the interface.
|
|
ifOperStatus -- ifOperStatus of the interface.
|
|
ifDescr -- ifDescr of the interface.
|
|
ifType -- ifType, this provides descrimination of interfaces that are tunnels.
|
|
ifReasonForStatus-ces -- reason for the change in status.
|
|
ifPhysLocation-ces -- this is the slot number.
|
|
ifPhysRelPos-ces -- the port number on the board defined in interfacePhysLocation.
|
|
ifIpAddr-ces -- IP address assigned to the phys port or the local IP address of a tunnel.
|
|
ifName-ces -- Name of the tunnel or physical interface.
|
|
ifTunnelRemoteIpAddr-ces -- for non-tunnel interfaces it is zero.
|
|
sysObjectID -- sysObjectID of the unit.
|
|
sysName -- sysName of the unit.
|
|
"
|
|
::= 2
|
|
|
|
-- linkUp ---------------------------------
|
|
linkUp TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
VARIABLES { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, ifType,
|
|
ifReasonForStatus-ces, ifPhysLocation-ces, ifPhysRelPos-ces,
|
|
ifIpAddr-ces, ifName-ces, ifTunnelRemoteIpAddr-ces,
|
|
sysObjectID, sysName }
|
|
DESCRIPTION
|
|
"A linkUp trap signifies that the sending
|
|
protocol entity recognizes that one of the
|
|
communication links represented in the agent's
|
|
configuration has come up.
|
|
Varbind list:
|
|
ifIndex -- ifIndex of the interface.
|
|
ifAdminStatus -- ifAdminStatus of the interface.
|
|
ifOperStatus -- ifOperStatus of the interface.
|
|
ifDescr -- ifDescr of the interface.
|
|
ifType -- ifType, this provides descrimination of interfaces that are tunnels.
|
|
ifReasonForStatus-ces -- reason for the change in status
|
|
ifPhysLocation-ces -- this is the slot number.
|
|
ifPhysRelPos-ces -- the port number on the board defined in interfacePhysLocation.
|
|
ifIpAddr-ces -- IP address assigned to the phys port or the local IP address of a tunnel.
|
|
ifName-ces -- Name of the tunnel or physical interface.
|
|
ifTunnelRemoteIpAddr-ces -- for non-tunnel interfaces it is zero.
|
|
sysObjectID -- sysObjectID of the unit.
|
|
sysName -- sysName of the unit.
|
|
"
|
|
::= 3
|
|
|
|
snmpAgentAuthTrapInfo-ces OBJECT IDENTIFIER
|
|
::= {snmpAgentTrapInfo-ces 1}
|
|
|
|
snmpAuthenOperation-ces OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
getRequest(160),
|
|
getNextRequest(161),
|
|
setRequest(163),
|
|
getBulkRequest(165)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "SNMP operation attempted."
|
|
::= {snmpAgentAuthTrapInfo-ces 1}
|
|
|
|
snmpAuthenIpAddress-ces OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IP address of host trying to access the CES."
|
|
::= {snmpAgentAuthTrapInfo-ces 2}
|
|
|
|
snmpAuthenCommString-ces OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Community string used to access the CES."
|
|
::= {snmpAgentAuthTrapInfo-ces 3}
|
|
|
|
authenticationFailure TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
VARIABLES {
|
|
snmpAuthenOperation-ces,
|
|
snmpAuthenIpAddress-ces,
|
|
snmpAuthenCommString-ces,
|
|
sysObjectID,
|
|
sysName
|
|
}
|
|
DESCRIPTION
|
|
"An authenticationFailure trap signifies that the SNMPv2
|
|
entity, acting in an agent role, has received a protocol
|
|
message that is not properly authenticated.
|
|
The snmpEnableAuthenTraps object indicates
|
|
whether this trap will be generated.
|
|
|
|
snmpAuthenOperation-ces identifies the operation( ie. GetRequest,
|
|
GetNextRequest,... ) was being attempted.
|
|
snmpAuthenIpAddress-ces identifies the source IP address of
|
|
the operation.
|
|
snmpAuthenCommString-ces identifies the community string that
|
|
was used in the operation."
|
|
::= 5
|
|
|
|
snmpAgentFirewallInfo-ces OBJECT IDENTIFIER
|
|
::= {snmpAgentTrapInfo-ces 3}
|
|
|
|
firewallPolicyType-ces OBJECT-TYPE
|
|
SYNTAX FirewallPolicyType-ces
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Policy type."
|
|
::= {snmpAgentFirewallInfo-ces 1}
|
|
|
|
firewallRuleType-ces OBJECT-TYPE
|
|
SYNTAX FirewallRuleType-ces
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Type of rule that triggered this event."
|
|
::= {snmpAgentFirewallInfo-ces 2}
|
|
|
|
firewallRuleNumber-ces OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of the rule that triggered this event."
|
|
::= {snmpAgentFirewallInfo-ces 3}
|
|
|
|
firewallSrcAddr-ces OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Source IP address of the packet."
|
|
::= {snmpAgentFirewallInfo-ces 6}
|
|
|
|
firewallSrcPort-ces OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Source port address of the packet."
|
|
::= {snmpAgentFirewallInfo-ces 7}
|
|
|
|
firewallDestAddr-ces OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Destination IP address of the packet."
|
|
::= {snmpAgentFirewallInfo-ces 8}
|
|
|
|
firewallDestPort-ces OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Destination port of the packet."
|
|
::= {snmpAgentFirewallInfo-ces 9}
|
|
|
|
firewallProtocolID-ces OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The value of the protocol field in the IP header."
|
|
::= {snmpAgentFirewallInfo-ces 10}
|
|
|
|
firewallRuleAction-ces OBJECT-TYPE
|
|
SYNTAX FirewallRuleAction-ces
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Action defined for the triggered rule."
|
|
::= {snmpAgentFirewallInfo-ces 11}
|
|
|
|
firewallRuleTriggeredTrap TRAP-TYPE
|
|
ENTERPRISE snmpAgentFirewallInfo-ces
|
|
VARIABLES {
|
|
firewallPolicyType-ces, -- Policy type.
|
|
firewallRuleType-ces, -- Type of rule that triggered this event.
|
|
firewallRuleNumber-ces, -- Number of the rule that triggered this event.
|
|
ifIndex, -- ifIndex is the index into the ifTable for port that received the packet.
|
|
ifName-ces, -- The name of the interface, same as ifName.
|
|
firewallSrcAddr-ces, -- Source IP address of the packet.
|
|
firewallSrcPort-ces, -- Source port address of the packet.
|
|
firewallDestAddr-ces, -- Destination IP address of the packet.
|
|
firewallDestPort-ces, -- Destination port of the packet.
|
|
firewallProtocolID-ces, -- The value of the protocol field in the IP header.
|
|
firewallRuleAction-ces, -- Action defined for the triggered rule.
|
|
sysObjectID,
|
|
sysName
|
|
}
|
|
DESCRIPTION
|
|
"An event sent at the user's request to signal that a rule has
|
|
been matched.
|
|
|
|
firewallPolicyType-ces -- Policy type.
|
|
firewallRuleType-ces -- Type of rule that triggered this event.
|
|
firewallRuleNumber-ces -- Number of the rule that triggered this event.
|
|
ifIndex -- ifIndex is the index into the ifTable for port that received the packet.
|
|
ifName-ces -- The name of the interface, same as ifName.
|
|
firewallSrcAddr-ces -- Source IP address of the packet.
|
|
firewallSrcPort-ces -- Source port address of the packet.
|
|
firewallDestAddr-ces -- Destination IP address of the packet.
|
|
firewallDestPort-ces -- Destination port of the packet.
|
|
firewallProtocolID-ces -- The value of the protocol field in the IP header.
|
|
firewallRuleAction-ces -- Action defined for the triggered rule.
|
|
"
|
|
::= 1
|
|
|
|
END
|