3012 lines
113 KiB
Plaintext
3012 lines
113 KiB
Plaintext
TN-IEEE8021-CFM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- (c) Copyright 2021 Nokia Networks. All rights reserved.
|
|
-- This software is the confidential and proprietary property of
|
|
-- Nokia and may only be used in accordance with the terms of the
|
|
-- license agreement provided with this software.
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, Unsigned32, OBJECT-TYPE,
|
|
NOTIFICATION-TYPE, Integer32, Counter32,
|
|
Gauge32 FROM SNMPv2-SMI
|
|
|
|
TEXTUAL-CONVENTION,
|
|
MacAddress, TruthValue FROM SNMPv2-TC
|
|
|
|
InterfaceIndex FROM IF-MIB
|
|
|
|
dot1agCfmMdIndex, dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier,
|
|
Dot1agCfmMDLevel, Dot1agCfmMpDirection,
|
|
Dot1agCfmMepIdOrZero, dot1agCfmMepEntry,
|
|
Dot1agCfmMepId,
|
|
dot1agCfmMepTransmitLbmDestMacAddress,
|
|
dot1agCfmMepTransmitLtmSeqNumber,
|
|
Dot1agCfmCcmInterval,
|
|
dot1agCfmMaNetEntry,
|
|
dot1agCfmMaMepListEntry FROM IEEE8021-CFM-MIB
|
|
|
|
tnSRMIBModules, tnSRObjs,
|
|
tnSRNotifyPrefix FROM TROPIC-GLOBAL-REG
|
|
|
|
SdpId FROM TN-SERV-MIB
|
|
|
|
tnSysSwitchId FROM TROPIC-SYSTEM-MIB
|
|
|
|
TmnxServId, TmnxEnabledDisabled, TNamedItem FROM TN-TC-MIB;
|
|
|
|
tnIEEE8021CfmMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED "202109171200Z"
|
|
ORGANIZATION "Nokia"
|
|
CONTACT-INFO
|
|
"Nokia 7x50 Support
|
|
Web: http://www.nokia.com/comps/pages/carrier_support.jhtml"
|
|
DESCRIPTION
|
|
"This document is the SNMP MIB module to manage and provision dot1ag
|
|
Connectivity Fault Management module functionality for the Nokia 7x50
|
|
products. This includes extensions to the IEEE8021-CFM MIB.
|
|
|
|
This SNMP MIB module (Specification) embodies Nokia's
|
|
proprietary intellectual property. Nokia retains
|
|
all title and ownership in the Specification, including any
|
|
revisions.
|
|
|
|
Nokia grants all interested parties a non-exclusive
|
|
license to use and distribute an unmodified copy of this
|
|
Specification in connection with management of Nokia
|
|
products, and without fee, provided this copyright notice and
|
|
license appear on all copies.
|
|
|
|
This Specification is supplied 'as is', and Nokia
|
|
makes no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the Specification."
|
|
|
|
--
|
|
-- Revision History
|
|
--
|
|
|
|
REVISION "202109171200Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmMepOndemandLmTestRsltTable:
|
|
tnDot1agCfmMepOndemandLmRemoteMacAddr."
|
|
|
|
REVISION "202106041200Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmMepOndemandLmTestTable:
|
|
tnDot1agCfmMepOndemandLmTimeout."
|
|
|
|
REVISION "202005221200Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmStackMPType:
|
|
ethRing(3)
|
|
to
|
|
facInterface(5)."
|
|
|
|
REVISION "201911221200Z"
|
|
DESCRIPTION "1) Changed SYNTAX of the following from Unsigned32(1..90) to
|
|
Unsigned32(1..5000):
|
|
tnDot1agCfmMepSlmTWInterval.
|
|
2) Added the following to tnDot1agCfmMepSlmTWIntrvlUnits:
|
|
decimilliseconds(3)."
|
|
|
|
REVISION "201908031200Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmMepTable:
|
|
tnDot1agCfmMepAlmProfName."
|
|
|
|
REVISION "201905031200Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmMepDelayRsltTable:
|
|
tnDot1agCfmMepDelayNearEndTestDelay
|
|
tnDot1agCfmMepDelayNearEndVariation
|
|
tnDot1agCfmMepDelayFarEndTestDelay
|
|
tnDot1agCfmMepDelayFarEndVariation."
|
|
|
|
REVISION "201903291200Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmMepTable:
|
|
tnDot1agCfmMepOWDTDataSize."
|
|
|
|
REVISION "201710061200Z"
|
|
DESCRIPTION "1) Added the following to tnDot1agCfmMaMepListTable:
|
|
tnDot1agCfmMaMepListSapSubType.
|
|
2) Fixed MIB compile issues."
|
|
|
|
REVISION "201505081200Z"
|
|
DESCRIPTION "1) Added the following to tnDot1agCfmMepTable:
|
|
tnDot1agCfmMepType
|
|
2) Added the following to tnDot1agCfmMepTable:
|
|
tnDot1agCfmMepFaultPropagation"
|
|
|
|
REVISION "201409181200Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmMepTable:
|
|
tnDot1agCfmMepTransmitLbmDataTlvSize."
|
|
|
|
REVISION "201407241200Z"
|
|
DESCRIPTION "Changed range for tnDot1agCfmMepSlmTWDataSize to 9558 from 1500."
|
|
|
|
REVISION "201402100000Z"
|
|
DESCRIPTION "Added the following to tnDot1agCfmMepTable:
|
|
tnDot1agCfmMepTWDTDataSize."
|
|
|
|
REVISION "201308220000Z"
|
|
DESCRIPTION "1) Added the following tables:
|
|
tnDot1agCfmMaNetTable
|
|
tnDot1agCfmMaMepListTable
|
|
tnDot1agCfmComponentLimitTable.
|
|
2) Added the following to tnDot1agCfmMepSlmTWTestTable:
|
|
tnDot1agCfmMepSlmTWIntrvlUnits.
|
|
3) Updated upper range of tnDot1agCfmMepSlmTWInterval
|
|
from 10 to 90.
|
|
4) Updated upper range of tnDot1agCfmMepSlmTWSendCount
|
|
from 100 to 1000."
|
|
|
|
REVISION "201212130000Z"
|
|
DESCRIPTION "1) Added the following to tnDot1agCfmMepTable:
|
|
tnDot1agCfmMepMcLagInactive.
|
|
2) Added the following table:
|
|
tnDot1agCfmMcLagConfigTable."
|
|
|
|
REVISION "201212050000Z"
|
|
DESCRIPTION "Commented out unsupported MIB tables and
|
|
attributes for 1830."
|
|
|
|
REVISION "201209091200Z"
|
|
DESCRIPTION "1) Added the following to tnDot1agCfmMepSlmTWTestTable:
|
|
tnDot1agCfmMepSlmTWIntervalRedef.
|
|
2) Added the following tables:
|
|
tnDot1agCfmMepOndemandLmTestTable
|
|
tnDot1agCfmMepOndemandLmTestRsltTable
|
|
tnDot1agCfmMepOWDelayRsltExtTable.
|
|
3) Added the following notification:
|
|
tnDot1agCfmMepOndemandLmTestComplete."
|
|
|
|
REVISION "201203291200Z"
|
|
DESCRIPTION "Added tnDot1agCfmMepCsfTable."
|
|
|
|
REVISION "200902280000Z"
|
|
DESCRIPTION "Rev 7.0 28 Feb 2009 00:00
|
|
7.0 release of the TIMETRA-IEEE8021-CFM-MIB."
|
|
|
|
REVISION "200801010000Z"
|
|
DESCRIPTION "Rev 1.0 01 Jan 2008 00:00
|
|
Initial version of the TIMETRA-IEEE8021-CFM-MIB."
|
|
|
|
::= { tnSRMIBModules 52 }
|
|
|
|
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
--
|
|
-- Nokia 7x50 product series IEEE8021-CFM extensions
|
|
--
|
|
|
|
tnDot1agMIBObjs OBJECT IDENTIFIER ::= { tnSRObjs 52 }
|
|
tnDot1agNotificationsPrefix OBJECT IDENTIFIER ::= { tnSRNotifyPrefix 52 }
|
|
tnDot1agNotifications OBJECT IDENTIFIER ::= { tnDot1agNotificationsPrefix 0 }
|
|
-- tnDot1agMIBConformance OBJECT IDENTIFIER ::= { tnSRConfs 52 }
|
|
|
|
-- Groups in the Nokia CFM MIB Module
|
|
tnDot1agCfmStack OBJECT IDENTIFIER ::= { tnDot1agMIBObjs 1 }
|
|
tnDot1agCfmGlobalObjs OBJECT IDENTIFIER ::= { tnDot1agMIBObjs 2 }
|
|
tnDot1agCfmMa OBJECT IDENTIFIER ::= { tnDot1agMIBObjs 6 }
|
|
tnDot1agCfmMep OBJECT IDENTIFIER ::= { tnDot1agMIBObjs 7 }
|
|
-- tnDot1agCfmMip OBJECT IDENTIFIER ::= { tnDot1agMIBObjs 8 }
|
|
-- tnDot1agCfmNotificationObjs OBJECT IDENTIFIER ::= { tnDot1agMIBObjs 9 }
|
|
|
|
NokiaPmonUnitType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Statistics unit type for proactive and on-demand OAM PM."
|
|
SYNTAX INTEGER {
|
|
microseconds(1),
|
|
hundred-nano-seconds(2),
|
|
nano-seconds(3)
|
|
}
|
|
|
|
--
|
|
--
|
|
-- Nokia 7x50 product series dot1ag CFM SDP-Bind Stack Table
|
|
--
|
|
-- This table is a mirror of the dot1agCfmStackTable in IEEE8021-CFM-MIB.
|
|
--
|
|
-- The indexes of this table differ from that of the dot1agCfmStackTable
|
|
-- by the replacement of the dot1agCfmStackIfIndex and
|
|
-- dot1agCfmStackVlanIdOrNone indexes with that of the
|
|
-- tnDot1agCfmSdpBindStackSdpid and tnDot1agCfmSdpBindStackVcId indexes.
|
|
|
|
-- The CFM Sdp-Bind Stack Table
|
|
|
|
-- tnDot1agCfmSdpBindStackTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF TnDot1agCfmSdpBindStackEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "There is one CFM Sdp-Bind Stack table per bridge. It permits
|
|
-- the retrieval of information about the Maintenance Points
|
|
-- configured on any given Sdp bindings."
|
|
-- REFERENCE
|
|
-- "802.1ag clauses 12.14.2"
|
|
-- ::= { tnDot1agCfmStack 1 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackEntry OBJECT-TYPE
|
|
-- SYNTAX TnDot1agCfmSdpBindStackEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A conceptual row in the tnDot1agCfmSdpBindStackTable. This row behaves
|
|
-- exactly like the dot1agCfmStackEntry row."
|
|
-- INDEX { tnDot1agCfmSdpBindStackSdpId,
|
|
-- tnDot1agCfmSdpBindStackVcId,
|
|
-- tnDot1agCfmSdpBindStackMdLevel,
|
|
-- tnDot1agCfmSdpBindStackDirection
|
|
-- }
|
|
-- ::= { tnDot1agCfmSdpBindStackTable 1 }
|
|
--
|
|
-- TnDot1agCfmSdpBindStackEntry ::= SEQUENCE {
|
|
-- tnDot1agCfmSdpBindStackSdpId SdpId,
|
|
-- tnDot1agCfmSdpBindStackVcId Unsigned32,
|
|
-- tnDot1agCfmSdpBindStackMdLevel Dot1agCfmMDLevel,
|
|
-- tnDot1agCfmSdpBindStackDirection Dot1agCfmMpDirection,
|
|
-- tnDot1agCfmSdpBindStackMdIndex Unsigned32,
|
|
-- tnDot1agCfmSdpBindStackMaIndex Unsigned32,
|
|
-- tnDot1agCfmSdpBindStackMepId Dot1agCfmMepIdOrZero,
|
|
-- tnDot1agCfmSdpBindStackMacAddress MacAddress
|
|
-- }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackSdpId OBJECT-TYPE
|
|
-- SYNTAX SdpId
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackSdpId specifies the
|
|
-- Bridge Port or aggregated port on which MEPs or MHFs
|
|
-- might be configured."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.2:a"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 1 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackVcId OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackVcId specifies, along with
|
|
-- tnDot1agCfmSdpBindStackSdpId, the SDP Binding for the bridge."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.2:d"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 2 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackMdLevel OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmMDLevel
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackMdLevel specifies the MD Level of
|
|
-- the Maintenance Point."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.2:b"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 3 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackDirection OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmMpDirection
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackDirection specifies the
|
|
-- Direction in which the MP faces on the Bridge Port"
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.2:c"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 4 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackMdIndex OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackMdIndex indicates the index
|
|
-- of the Maintenance Domain in the dot1agCfmMdTable to which the
|
|
-- MP is associated, or 0, if none."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:b"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 5 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackMaIndex OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackMaIndex indicates the index
|
|
-- of the MA in the dot1agCfmMaNetTable and dot1agCfmMaCompTable
|
|
-- to which the MP is associated, or 0, if none."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:c"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 6 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackMepId OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmMepIdOrZero
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackMepId indicates if an MEP
|
|
-- is configured, the MEPID, else 0"
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:d"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 7 }
|
|
--
|
|
-- tnDot1agCfmSdpBindStackMacAddress OBJECT-TYPE
|
|
-- SYNTAX MacAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpBindStackMacAddress indicates
|
|
-- the MAC address of the MP."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:e"
|
|
-- ::= { tnDot1agCfmSdpBindStackEntry 8 }
|
|
|
|
-- Nokia 7x50 product series CFM MepEntry table
|
|
--
|
|
-- This table is an augmentation of the dot1agCfmMepTable in IEEE8021-CFM-MIB.
|
|
--
|
|
-- Use of AUGMENTS clause implies a one-to-one dependent relationship between
|
|
-- the base table, dot1agCfmMepTable, and the augmenting table,
|
|
-- tnDot1agCfmMepTable, with additional columns. Creation (or deletion) of a row
|
|
-- in the dot1agCfmMepTable results in the same fate for the row in the
|
|
-- tnDot1agCfmMepTable.
|
|
|
|
|
|
-- ******************************************************************
|
|
-- The MEP Table
|
|
-- ******************************************************************
|
|
|
|
tnDot1agCfmMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table augments the Maintenance Association End Point (MEP) table
|
|
of the IEEE8021-CFM-MIB."
|
|
::= { tnDot1agCfmMep 1 }
|
|
|
|
tnDot1agCfmMepEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the tnDot1agCfmMepTable. This row exists only
|
|
if the association dot1agCfmMepEntry is active."
|
|
AUGMENTS { dot1agCfmMepEntry }
|
|
::= { tnDot1agCfmMepTable 1 }
|
|
|
|
TnDot1agCfmMepEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepSdpId SdpId,
|
|
tnDot1agCfmMepVcId Unsigned32,
|
|
tnDot1agCfmMepMacAddress MacAddress,
|
|
tnDot1agCfmMepAisEnable TruthValue,
|
|
tnDot1agCfmMepAisMegLevel BITS,
|
|
tnDot1agCfmMepAisPriority Unsigned32,
|
|
tnDot1agCfmMepAisInterval Unsigned32,
|
|
tnDot1agCfmMepEthRxAisInterval Unsigned32,
|
|
tnDot1agCfmMepEthRxAis TruthValue,
|
|
tnDot1agCfmMepEthAisTxCount Counter32,
|
|
tnDot1agCfmMepEthTestEnable TruthValue,
|
|
tnDot1agCfmMepEthTestPattern INTEGER,
|
|
tnDot1agCfmMepEthTestMacAddr MacAddress,
|
|
tnDot1agCfmMepEthTestDataLen Unsigned32,
|
|
tnDot1agCfmMepEthTestPriority Unsigned32,
|
|
tnDot1agCfmMepOWDTMacAddress MacAddress,
|
|
tnDot1agCfmMepOWDTPriority Unsigned32,
|
|
tnDot1agCfmMepTWDTMacAddress MacAddress,
|
|
tnDot1agCfmMepTWDTPriority Unsigned32,
|
|
tnDot1agCfmMepSvcId TmnxServId,
|
|
tnDot1agCfmMepControlMep TruthValue,
|
|
tnDot1agCfmMepEthTestThreshold Unsigned32,
|
|
tnDot1agCfmMepOWDTThreshold Unsigned32,
|
|
tnDot1agCfmMepMcLagInactive INTEGER,
|
|
tnDot1agCfmMepTWDTDataSize Unsigned32,
|
|
tnDot1agCfmMepTransmitLbmDataTlvSize Unsigned32,
|
|
tnDot1agCfmMepType INTEGER,
|
|
tnDot1agCfmMepFaultPropagation INTEGER,
|
|
tnDot1agCfmMepOWDTDataSize Unsigned32,
|
|
tnDot1agCfmMepAlmProfName OCTET STRING
|
|
}
|
|
|
|
tnDot1agCfmMepSdpId OBJECT-TYPE
|
|
SYNTAX SdpId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSdpId specifies, along with the
|
|
tnDot1agCfmMepVcId, the SDP-Binding within a bridge port,
|
|
to which the MEP is attached.
|
|
|
|
This object is applicable to SDP-Bindings only, and MUST be set
|
|
to the null ID (0) when dot1agCfmMepIfIndex or
|
|
dot1agCfmMepPrimaryVid, is non-zero. When this object is
|
|
applicable (non-zero), the dot1agCfmMepIfIndex and
|
|
dot1agCfmMepPrimaryVid MUST be set to zero (0)."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:a"
|
|
::= { tnDot1agCfmMepEntry 1 }
|
|
|
|
tnDot1agCfmMepVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepVcId specifies, along with
|
|
tnDot1agCfmMepSdpId, the SDP Binding for the bridge.
|
|
|
|
tnDot1agCfmMepVcId is applicable to SDP-Bindings only, and MUST
|
|
be set to zero (0) when dot1agCfmMepIfIndex or
|
|
dot1agCfmMepPrimaryVid is non-zero. When this object is
|
|
applicable (non-zero), the dot1agCfmMepIfIndex and
|
|
dot1agCfmMepPrimaryVid MUST be set to zero (0)."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:d"
|
|
::= { tnDot1agCfmMepEntry 2 }
|
|
|
|
tnDot1agCfmMepMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepMacAddress specifies the mac-address
|
|
that is assigned to dot1agCfmMepMacAddress."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:i and 19.4"
|
|
::= { tnDot1agCfmMepEntry 3 }
|
|
|
|
tnDot1agCfmMepAisEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepAisEnable specifies whether AIS
|
|
frames are generated from the Maintenance Entity Group (MEG)."
|
|
DEFVAL { false }
|
|
::= { tnDot1agCfmMepEntry 4 }
|
|
|
|
tnDot1agCfmMepAisMegLevel OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
level1 (0),
|
|
level2 (1),
|
|
level3 (2),
|
|
level4 (3),
|
|
level5 (4),
|
|
level6 (5),
|
|
level7 (6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepAisMegLevel specifies the levels
|
|
that should be notified to suppress alarms resulting from defect
|
|
conditions detected by the MEP."
|
|
DEFVAL { { } }
|
|
::= { tnDot1agCfmMepEntry 5 }
|
|
|
|
tnDot1agCfmMepAisPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepAisPriority specifies at what priority
|
|
the AIS frames should be transmitted."
|
|
DEFVAL { 7 }
|
|
::= { tnDot1agCfmMepEntry 6 }
|
|
|
|
tnDot1agCfmMepAisInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1 | 60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepAisInterval specifies at what intervals
|
|
to transmit AIS frames."
|
|
DEFVAL { 1 }
|
|
::= { tnDot1agCfmMepEntry 7 }
|
|
|
|
tnDot1agCfmMepEthRxAisInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1 | 60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthRxAisInterval indicates the AIS Interval
|
|
received in the last AIS Frame."
|
|
DEFVAL { 1 }
|
|
::= { tnDot1agCfmMepEntry 8 }
|
|
|
|
tnDot1agCfmMepEthRxAis OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthRxAis indicates the MEP is receiving
|
|
AIS test frames from one or more of its sub-layer MEPs."
|
|
DEFVAL { false }
|
|
::= { tnDot1agCfmMepEntry 9 }
|
|
|
|
tnDot1agCfmMepEthAisTxCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthAisTxCount indicates number of
|
|
AIS frames transmitted on the MEP."
|
|
::= { tnDot1agCfmMepEntry 10 }
|
|
|
|
tnDot1agCfmMepEthTestEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthTestEnable specifies whether
|
|
ethernet test frames are to be generated on transmission or
|
|
processed on reception. If this object is set to 'false',
|
|
then tnDot1agCfmMepEthTestPattern is undefined.
|
|
|
|
When this object is set to 'true', tnDot1agCfmMepEthTestPattern
|
|
is reset to its default value, unless tnDot1agCfmMepEthTestPattern
|
|
is set to a specific value in the same SNMP PDU."
|
|
DEFVAL { false }
|
|
::= { tnDot1agCfmMepEntry 11 }
|
|
|
|
tnDot1agCfmMepEthTestPattern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allZerosNoCrc (0),
|
|
allZerosCrc (1),
|
|
prbsNoCrc (2),
|
|
prbsCrc (3),
|
|
allOnesNoCrc (4),
|
|
allOnesCrc (5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthTestPattern specifies the data-content
|
|
of the AIS test frames. 'allZerosNoCrc (0)' and 'allZerosCrc (1)'
|
|
specifies the data content as all zero values (without and with CRC
|
|
calculations respectively). 'prbsNoCrc (3) and 'prbsCrc (4) specifies
|
|
the data content as pseudo random bit sequence (without and with CRC
|
|
calculations respectively). 'allOnesNoCrc (4)' and 'allOnesCrc (5)',
|
|
specifies the data content as all ones (without and with CRC
|
|
calculations respectively).
|
|
|
|
This object is only applicable if tnDot1agCfmMepEthTestEnable is set
|
|
to 'true'."
|
|
DEFVAL { allZerosNoCrc }
|
|
::= { tnDot1agCfmMepEntry 12 }
|
|
|
|
tnDot1agCfmMepEthTestMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthTestMacAddr specifies the MAC address
|
|
of the target to whom the Eth-test frames are sent.
|
|
|
|
Setting this object will trigger the test frame to be sent. Once the test
|
|
is complete, the object will revert to the default value, indicating that
|
|
another test is possible."
|
|
DEFVAL { '000000000000'H }
|
|
::= { tnDot1agCfmMepEntry 13 }
|
|
|
|
tnDot1agCfmMepEthTestDataLen OBJECT-TYPE
|
|
SYNTAX Unsigned32 (64..1500)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthTestDataLen specifies the length of the data
|
|
sent in an Eth-test frame. The contents of the data is specified by the
|
|
tnDot1agCfmMepEthTestPattern object."
|
|
DEFVAL { 64 }
|
|
::= { tnDot1agCfmMepEntry 14 }
|
|
|
|
tnDot1agCfmMepEthTestPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthTestPriority specifies the priority used
|
|
in generating Eth-Test frames."
|
|
DEFVAL { 7 }
|
|
::= { tnDot1agCfmMepEntry 15 }
|
|
|
|
tnDot1agCfmMepOWDTMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOWDTMacAddress specifies the MAC address used
|
|
as a target for the One-Way-Delay Test (OWDT).
|
|
|
|
Setting this object will trigger a One-Way-Delay test to the specified
|
|
MAC address.
|
|
|
|
Upon completion of the test, the MacAddress will revert to it's
|
|
default value, indicating that another test is possible."
|
|
DEFVAL { '000000000000'H }
|
|
::= { tnDot1agCfmMepEntry 16 }
|
|
|
|
tnDot1agCfmMepOWDTPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOWDTPriority specifies the priority used in
|
|
the generated test frame for the One-Way-Delay test."
|
|
DEFVAL { 7 }
|
|
::= { tnDot1agCfmMepEntry 17 }
|
|
|
|
tnDot1agCfmMepTWDTMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepTWDTMacAddress specifies the MAC address used
|
|
as a target for the Two-Way-Delay Test (TWDT).
|
|
|
|
Setting this object will trigger a Two-Way-Delay test to the specified
|
|
MAC address.
|
|
|
|
Upon completion of the test, the MacAddress will revert to it's
|
|
default value, indicating that another test is possible."
|
|
DEFVAL { '000000000000'H }
|
|
::= { tnDot1agCfmMepEntry 18 }
|
|
|
|
tnDot1agCfmMepTWDTPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepTWDTPriority specifies the priority used in
|
|
the generated test frame for the Two-Way-Delay test."
|
|
DEFVAL { 7 }
|
|
::= { tnDot1agCfmMepEntry 19 }
|
|
|
|
tnDot1agCfmMepSvcId OBJECT-TYPE
|
|
SYNTAX TmnxServId
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSvcId specifies the service that the virtual
|
|
MEP is being created in.
|
|
|
|
tnDot1agCfmMepSvcId is applicable to virtual MEPs only, and MUST
|
|
be set to zero (0) when dot1agCfmMepIfIndex, dot1agCfmMepPrimaryVid,
|
|
tnDot1agCfmMepSdpId, or tnDot1agCfmMepVcId is non-zero. When this
|
|
object is applicable (non-zero), the above objects MUST be set to zero (0)."
|
|
::= { tnDot1agCfmMepEntry 20 }
|
|
|
|
tnDot1agCfmMepControlMep OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepControlMep specifies whether or not the
|
|
operational state of the MEP is used by the management entity over which
|
|
this MEP is configured."
|
|
DEFVAL { false }
|
|
::= { tnDot1agCfmMepEntry 21 }
|
|
|
|
tnDot1agCfmMepEthTestThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..11840)
|
|
UNITS "bit-errors"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepEthTestThreshold specifies when a
|
|
tnDot1agCfmMepEthTestComplete notification is sent. If
|
|
tnDot1agCfmMepEthTestThreshold is set to zero (0), a notification is
|
|
sent on the completion of any test for this MEP. Otherwise the
|
|
threshold must be exceeded and/or CRC failures must be detected to
|
|
send the notification."
|
|
DEFVAL { 1 }
|
|
::= { tnDot1agCfmMepEntry 22 }
|
|
|
|
tnDot1agCfmMepOWDTThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOWDTThreshold specifies when a
|
|
tnDot1agCfmMepDMTestComplete notification is sent for a one-way-delay
|
|
test. If tnDot1agCfmMepOWDTThreshold is set to zero (0), a
|
|
notification is sent on the completion of any one-way-delay-test for
|
|
this MEP. Otherwise the threshold must be exceeded to send the
|
|
notification."
|
|
DEFVAL { 3 }
|
|
::= { tnDot1agCfmMepEntry 23 }
|
|
|
|
tnDot1agCfmMepMcLagInactive OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (0),
|
|
standby (1),
|
|
active (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxDot1agCfmMepMcLagInactive indicates whether or not the
|
|
MEP is inactive, 'standby (2)', due to the MC-LAG standby state. The
|
|
value of tmnxDot1agCfmMcLagStdbyInactive must be set to 'true (1)' for
|
|
this object to have meaning and return anything other than
|
|
'notApplicable (0)'."
|
|
::= { tnDot1agCfmMepEntry 24 }
|
|
|
|
tnDot1agCfmMepTWDTDataSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..9542)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepTWDTDataSize specifies the data size,
|
|
in bytes, contained in the padding TLV for the Two-Way delay test.
|
|
A value of zero (0) specifies that no padding
|
|
TLV is inserted in the packet. Any non-zero value will increase
|
|
the packet size by the specified data size plus 3 bytes for the TLV
|
|
header."
|
|
DEFVAL { 0 }
|
|
::= { tnDot1agCfmMepEntry 25 }
|
|
|
|
tnDot1agCfmMepTransmitLbmDataTlvSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..9570)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepTransmitLbmDataTlvSize specifies
|
|
the data size, in bytes, contained in the padding TLV
|
|
for the LBM test. A value of zero (0) specifies that
|
|
no padding TLV is inserted in the packet. Any non-zero value
|
|
will increase the packet size by the specified data size."
|
|
DEFVAL { 0 }
|
|
::= { tnDot1agCfmMepEntry 26 }
|
|
|
|
tnDot1agCfmMepType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default (0),
|
|
facilityPort (1),
|
|
facilityInterface (2),
|
|
sapPrimaryVlan (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxDot1agCfmMepType specifies the endpoint type that
|
|
this MEP facilitates.
|
|
default (0) -- implements a traditional MEP.
|
|
facilityPort (1) -- implements a facility port/LAG level MEP.
|
|
facilityInterface (2) -- implements a router interface level MEP.
|
|
sapPrimaryVlan (3) -- implements a SAP MEP using primary VLAN-ID
|
|
from the MA Comp Table. This is only
|
|
applicable if the MA primary VLAN ID is
|
|
set to a value other than zero (0).
|
|
|
|
This object must be specified during row creation."
|
|
DEFVAL { default }
|
|
::= { tnDot1agCfmMepEntry 27 }
|
|
|
|
tnDot1agCfmMepFaultPropagation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (0),
|
|
useIfStatusTLV (1),
|
|
suspendCCM (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepFaultPropagation specifies what action
|
|
should be taken by the MEP if a fault is detected in the service
|
|
containing the MEP. It also specifies if the MEP should propagate
|
|
a fault that it has detected into the service.
|
|
|
|
When this object is set to 'disabled (0)', no additional fault
|
|
propagation will occur. When this object is set to 'useIfStatusTLV
|
|
(1)', the MEP will send an interface status TLV in the next CCM
|
|
indicating fault when fault is detected, even if the MEP itself has
|
|
not detected a fault. When this object is set to 'suspendCCM (2)',
|
|
faults will be propagated by stopping the regular CCM transmissions
|
|
entirely. Once the fault is cleared, the regular CCM transmissions
|
|
will resume. Additionally, when the value of
|
|
tnDot1agCfmMepFaultPropagation is different than 'disabled (0)', a
|
|
defect detected by the MEP will be propagated into the service."
|
|
DEFVAL { disabled }
|
|
::= { tnDot1agCfmMepEntry 28 }
|
|
|
|
tnDot1agCfmMepOWDTDataSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..9542)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOWDTDataSize specifies the data size,
|
|
in bytes, contained in the padding TLV for the one-Way delay test.
|
|
A value of zero (0) specifies that no padding TLV is inserted in
|
|
the packet. Any non-zero value will increase the packet size by
|
|
the specified data size plus 3 bytes for the TLV header."
|
|
DEFVAL { 0 }
|
|
::= { tnDot1agCfmMepEntry 29 }
|
|
|
|
tnDot1agCfmMepAlmProfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "."
|
|
::= { tnDot1agCfmMepEntry 30 }
|
|
|
|
--
|
|
-- This table AUGMENTS the dot1agCfmMaNetTable in IEEE8021-CFM-MIB.
|
|
--
|
|
-- ******************************************************************
|
|
-- The CFM Maintenance Association Table
|
|
-- ******************************************************************
|
|
tnDot1agCfmMaNetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TDot1agCfmMaNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMaNetTable AUGMENTS the standard MIB table,
|
|
dot1agCfmMaNetTable. This table is used to enhance Maintenance
|
|
Association functionality for Ethernet Connectivity Fault Management
|
|
(ETH-CFM)."
|
|
::= { tnDot1agCfmMa 1 }
|
|
|
|
tnDot1agCfmMaNetEntry OBJECT-TYPE
|
|
SYNTAX TDot1agCfmMaNetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMaNetEntry consists of the configuration objects
|
|
used to enhance the Maintenance Association functionality."
|
|
AUGMENTS { dot1agCfmMaNetEntry }
|
|
::= { tnDot1agCfmMaNetTable 1 }
|
|
|
|
TDot1agCfmMaNetEntry ::= SEQUENCE {
|
|
tnDot1agCfmMaNetTotalMEPCount Counter32
|
|
}
|
|
|
|
tnDot1agCfmMaNetTotalMEPCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMaNetTotalMEPCount indicates the number of
|
|
unique MEPs configured (both local and remote) that are associated with
|
|
this MA.
|
|
|
|
When the number of MEPs exceed the normal MA limits, the MA is
|
|
considered to be an extended MA and will use a resource from the
|
|
'Extended MA' resource entry in tnDot1agCfmComponentLimitTable."
|
|
::= { tnDot1agCfmMaNetEntry 1 }
|
|
|
|
--
|
|
-- The MEP list table augments the standard dot1agCfmMaMepListTable
|
|
--
|
|
-- ******************************************************************
|
|
-- The MEP List Table
|
|
-- ******************************************************************
|
|
tnDot1agCfmMaMepListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TDot1agCfmMaMepListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMaMepListTable extends the functionality of the
|
|
dot1agCfmMaMepListTable."
|
|
::= { tnDot1agCfmMa 3 }
|
|
|
|
tnDot1agCfmMaMepListEntry OBJECT-TYPE
|
|
SYNTAX TDot1agCfmMaMepListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMaMepListEntry augments the standard MIB entry
|
|
for the purpose of extending functionality for Dot1ag CFM MEP Lists.
|
|
Rows are created and destroyed by the system through the row status
|
|
field in dot1agCfmMaMepListEntry."
|
|
AUGMENTS { dot1agCfmMaMepListEntry }
|
|
::= { tnDot1agCfmMaMepListTable 1 }
|
|
|
|
TDot1agCfmMaMepListEntry ::= SEQUENCE {
|
|
tnDot1agCfmMaMepListMacAddress MacAddress,
|
|
tnDot1agCfmMaMepListSapSubType INTEGER
|
|
}
|
|
|
|
tnDot1agCfmMaMepListMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMaMepListMacAddress specifies the target
|
|
unicast MAC address used for transmitting CFM packets to the remote
|
|
MEPs for the specified MEPID.
|
|
|
|
Setting a unicast MAC address restricts the number of MEPIDs that can
|
|
be configured for an individual MA to a maximum of one (1). Setting the
|
|
address back to the default value will remove this restriction and will
|
|
result in the regular CCM multicast address being used. This value
|
|
cannot be set to any multicast or broadcast address."
|
|
DEFVAL { '000000000000'H }
|
|
::= { tnDot1agCfmMaMepListEntry 1 }
|
|
|
|
tnDot1agCfmMaMepListSapSubType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
regular (0),
|
|
etree-root (1),
|
|
etree-leaf (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMaMepListSapSubType specifies the SAP
|
|
sub type of the remote MEP for the specified MEPID.
|
|
|
|
This is used to ensure that LLF shutdown is based only on remote
|
|
etree-root SAP faults and to suppress unwanted CCM alarms
|
|
on etree-leaf SAPs."
|
|
|
|
DEFVAL { regular }
|
|
::= { tnDot1agCfmMaMepListEntry 2 }
|
|
|
|
-- ******************************************************************
|
|
-- The Stack Object. This group will contain all the MIBs objects
|
|
-- needed to access the Stack managed object. This group supersedes
|
|
-- the dot1agCfmStackTable due to the inclusion of Q-in-Q
|
|
-- encapsulation. the VlanIdOrNone object has been expanded to
|
|
-- support the full-range of Vlan/Q-in-Q encapsulation. Otherwise
|
|
-- this group behaves identically to that of the standard
|
|
-- dot1agCfmStackTable.
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- The CFM Stack Table
|
|
-- ******************************************************************
|
|
tnDot1agCfmStackTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one CFM Stack table per bridge. It permits
|
|
the retrieval of information about the Maintenance Points
|
|
configured on any given interface.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.2"
|
|
::= { tnDot1agCfmStack 2 }
|
|
|
|
tnDot1agCfmStackEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stack table entry"
|
|
INDEX { tnDot1agCfmStackifIndex, tnDot1agCfmStackVlanIdOrNone,
|
|
tnDot1agCfmStackMdLevel, tnDot1agCfmStackDirection
|
|
}
|
|
::= { tnDot1agCfmStackTable 1 }
|
|
|
|
TnDot1agCfmStackEntry ::= SEQUENCE {
|
|
tnDot1agCfmStackifIndex InterfaceIndex,
|
|
tnDot1agCfmStackVlanIdOrNone Unsigned32,
|
|
tnDot1agCfmStackMdLevel Dot1agCfmMDLevel,
|
|
tnDot1agCfmStackDirection Dot1agCfmMpDirection,
|
|
tnDot1agCfmStackMdIndex Unsigned32,
|
|
tnDot1agCfmStackMaIndex Unsigned32,
|
|
tnDot1agCfmStackMepId Dot1agCfmMepIdOrZero,
|
|
tnDot1agCfmStackMacAddress MacAddress,
|
|
tnDot1agCfmStackMPType INTEGER
|
|
}
|
|
|
|
tnDot1agCfmStackifIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Bridge Port or aggregated port
|
|
on which MEPs or MHFs might be configured.
|
|
|
|
Upon a restart of the system, the system SHALL, if necessary,
|
|
change the value of this variable, and rearrange the
|
|
dot1agCfmStackTable, so that it indexes the entry in the
|
|
interface table with the same value of ifAlias that it
|
|
indexed before the system restart. If no such entry exists,
|
|
then the system SHALL delete all entries in the
|
|
dot1agCfmStackTable with the interface index.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:a"
|
|
::= { tnDot1agCfmStackEntry 1 }
|
|
|
|
tnDot1agCfmStackVlanIdOrNone OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID to which the MP is attached, or 0, if none."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.2.1.2:d, 22.1.7"
|
|
::= { tnDot1agCfmStackEntry 2 }
|
|
|
|
tnDot1agCfmStackMdLevel OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMDLevel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MD Level of the Maintenance Point."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:b"
|
|
::= { tnDot1agCfmStackEntry 3 }
|
|
|
|
tnDot1agCfmStackDirection OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMpDirection
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Direction in which the MP faces on the Bridge Port"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:c"
|
|
::= { tnDot1agCfmStackEntry 4 }
|
|
|
|
tnDot1agCfmStackMdIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the Maintenance Domain in the dot1agCfmMdTable
|
|
to which the MP is associated, or 0, if none."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.3:b"
|
|
::= { tnDot1agCfmStackEntry 5 }
|
|
|
|
tnDot1agCfmStackMaIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the MA in the dot1agCfmMaNetTable and
|
|
dot1agCfmMaCompTable to which the MP is associated, or 0, if
|
|
none."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.3:c"
|
|
::= { tnDot1agCfmStackEntry 6 }
|
|
|
|
tnDot1agCfmStackMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If an MEP is configured, the MEPID, else 0"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.3:d"
|
|
::= { tnDot1agCfmStackEntry 7 }
|
|
|
|
tnDot1agCfmStackMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the MP."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.3:e"
|
|
::= { tnDot1agCfmStackEntry 8 }
|
|
|
|
tnDot1agCfmStackMPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sap (1),
|
|
ethTun (2),
|
|
ethRing(3),
|
|
facPort(4),
|
|
facInterface(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmStackMPType indicates the entity that the
|
|
MP is configured on:
|
|
sap(1) MP is configured on a SAP
|
|
ethTun(2) MP is configured on an ethernet-tunnel"
|
|
::= { tnDot1agCfmStackEntry 9 }
|
|
|
|
--
|
|
-- Nokia 7x50 product series dot1ag CFM Virtual MEP Stack Table
|
|
--
|
|
-- This table is a mirror of the dot1agCfmStackTable in IEEE8021-CFM-MIB.
|
|
--
|
|
-- The indexes of this table differ from that of the dot1agCfmStackTable
|
|
-- by the replacement of the dot1agCfmStackIfIndex and
|
|
-- dot1agCfmStackVlanIdOrNone indexes with that of the
|
|
-- tnDot1agCfmVStackSvcId index.
|
|
|
|
-- The CFM Virtual Stack Table
|
|
|
|
-- tnDot1agCfmVStackTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF TnDot1agCfmVStackEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "There is one CFM Virtual Stack entry per service. It permits
|
|
-- the retrieval of information about the Maintenance Points
|
|
-- configured on any given virtual Maintenance Association End
|
|
-- Point (MEP)."
|
|
-- REFERENCE
|
|
-- "802.1ag clauses 12.14.2"
|
|
-- ::= { tnDot1agCfmStack 3 }
|
|
--
|
|
-- tnDot1agCfmVStackEntry OBJECT-TYPE
|
|
-- SYNTAX TnDot1agCfmVStackEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A conceptual row in the tnDot1agCfmVStackTable.
|
|
--
|
|
-- There exists one row for each configured virtual MEP in the system.
|
|
-- Rows are created and destroyed based on the existence of a virtual MEP."
|
|
-- INDEX { tnDot1agCfmVStackSvcId,
|
|
-- tnDot1agCfmVStackMdLevel,
|
|
-- tnDot1agCfmVStackDirection
|
|
-- }
|
|
-- ::= { tnDot1agCfmVStackTable 1 }
|
|
--
|
|
-- TnDot1agCfmVStackEntry ::= SEQUENCE {
|
|
-- tnDot1agCfmVStackSvcId TmnxServId,
|
|
-- tnDot1agCfmVStackMdLevel Dot1agCfmMDLevel,
|
|
-- tnDot1agCfmVStackDirection Dot1agCfmMpDirection,
|
|
-- tnDot1agCfmVStackMdIndex Unsigned32,
|
|
-- tnDot1agCfmVStackMaIndex Unsigned32,
|
|
-- tnDot1agCfmVStackMepId Dot1agCfmMepIdOrZero,
|
|
-- tnDot1agCfmVStackMacAddress MacAddress
|
|
-- }
|
|
--
|
|
-- tnDot1agCfmVStackSvcId OBJECT-TYPE
|
|
-- SYNTAX TmnxServId
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmVStackSvcId specifies the
|
|
-- service on which MEPs might be configured."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.2:a"
|
|
-- ::= { tnDot1agCfmVStackEntry 1 }
|
|
--
|
|
-- tnDot1agCfmVStackMdLevel OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmMDLevel
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmVStackMdLevel specifies the Maintenance
|
|
-- Domain (MD) Level of the Maintenance Point."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.2:b"
|
|
-- ::= { tnDot1agCfmVStackEntry 2 }
|
|
--
|
|
-- tnDot1agCfmVStackDirection OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmMpDirection
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmVStackDirection specifies the
|
|
-- direction in which the Maintenance Point (MP) faces on the service."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.2:c"
|
|
-- ::= { tnDot1agCfmVStackEntry 3 }
|
|
--
|
|
-- tnDot1agCfmVStackMdIndex OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmVStackMdIndex indicates the index
|
|
-- of the Maintenance Domain in the dot1agCfmMdTable to which the
|
|
-- Maintenance Point (MP) is associated, or 0, if none."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:b"
|
|
-- ::= { tnDot1agCfmVStackEntry 4 }
|
|
--
|
|
-- tnDot1agCfmVStackMaIndex OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmVStackMaIndex indicates the index
|
|
-- of the Maintenance Association (MA) in the dot1agCfmMaNetTable
|
|
-- and dot1agCfmMaCompTable to which the Maintenance Point (MP) is
|
|
-- associated, or 0, if none."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:c"
|
|
-- ::= { tnDot1agCfmVStackEntry 5 }
|
|
--
|
|
-- tnDot1agCfmVStackMepId OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmMepIdOrZero
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmVStackMepId indicates if an MEP
|
|
-- is configured, the MEPID, else 0."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:d"
|
|
-- ::= { tnDot1agCfmVStackEntry 6 }
|
|
--
|
|
-- tnDot1agCfmVStackMacAddress OBJECT-TYPE
|
|
-- SYNTAX MacAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmVStackMacAddress indicates
|
|
-- the MAC address of the MP."
|
|
-- REFERENCE
|
|
-- "802.1ag clause 12.14.2.1.3:e"
|
|
-- ::= { tnDot1agCfmVStackEntry 7 }
|
|
|
|
-- Nokia 7x50 product series CFM MIP table
|
|
--
|
|
-- The MIP tables (Sap and SDP) represent all the service endpoints
|
|
-- where Maintenance Domain Intermediate Point (MIP) creation can
|
|
-- occur. If a SAP or SDP-Binding does not have a correlating row
|
|
-- in these tables, then no MIP will be created for that endpoint.
|
|
|
|
-- tnDot1agCfmMcLagConfigGroup OBJECT IDENTIFIER ::= {tnDot1agCfmGlobalObjs 1}
|
|
|
|
-- ******************************************************************
|
|
-- The Multi-Chassis LAG Configuration Objects
|
|
-- ******************************************************************
|
|
tnDot1agCfmMcLagConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMcLagConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the tnDot1agCfmMcLagConfigTable indicates whether a Mc Lag
|
|
is in Active Standby or not and what the Hold Time will be."
|
|
::= { tnDot1agCfmGlobalObjs 1 }
|
|
|
|
tnDot1agCfmMcLagConfigEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMcLagConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Cfm entry for MC LAG"
|
|
INDEX { tnSysSwitchId }
|
|
::= { tnDot1agCfmMcLagConfigTable 1 }
|
|
|
|
TnDot1agCfmMcLagConfigEntry ::= SEQUENCE {
|
|
tnDot1agCfmMcLagConfigStdbyInactive TruthValue,
|
|
tnDot1agCfmMcLagConfigPropHoldTime Unsigned32
|
|
}
|
|
|
|
tnDot1agCfmMcLagConfigStdbyInactive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMcLagConfigStdbyInactive specifies whether or not
|
|
ETH-CFM MEPs configured on Multi-Chassis LAG ports are aware of MC-LAG
|
|
port active/standby states.
|
|
|
|
When this object is 'true (1)', MEPs configured on a Multi-Chassis
|
|
LAG port will act as if they are administratively shutdown if running
|
|
on a standby port, and will only be operational on an active MC-LAG
|
|
port.
|
|
|
|
When this object is 'false (2)', MEPs configured on a Multi-Chassis
|
|
LAG port will operate regardless of the MC-LAG port active and standby
|
|
states."
|
|
DEFVAL { false }
|
|
::= { tnDot1agCfmMcLagConfigEntry 1 }
|
|
|
|
tnDot1agCfmMcLagConfigPropHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMcLagConfigPropHoldTime specifies the duration, in
|
|
seconds, of a timer that is activated when an MC-LAG port or protocol
|
|
changes state. While the timer is active, no fault set or clear is
|
|
propagated to the MC-LAG SAP's CFM MEP.
|
|
|
|
The outstanding hold time can be monitored by polling the value of
|
|
sapEthCfmMcLagPropHoldTimeRemain for a particular SAP. When set to
|
|
the value zero (0), no delay in response to a port or protocol change
|
|
will be observed.
|
|
|
|
This object is meaningful only when tnDot1agCfmMcLagConfigStdbyInactive is
|
|
set to the value 'enabled (1)', otherwise an SNMP Set operation will
|
|
result in an inconsistentValue error and the result of an SNMP Get
|
|
operation will be undefined."
|
|
DEFVAL { 1 }
|
|
::= { tnDot1agCfmMcLagConfigEntry 2 }
|
|
|
|
--
|
|
-- ******************************************************************
|
|
-- The MIP (SAP) Table
|
|
-- ******************************************************************
|
|
--
|
|
-- tnDot1agCfmSapMipTable
|
|
-- OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF TnDot1agCfmSapMipEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A row in the tnDot1agCfmSapMipTable indicates that the
|
|
-- specified SAP may have a MIP created on the endpoint."
|
|
-- ::= { tnDot1agCfmMip 1 }
|
|
--
|
|
-- tnDot1agCfmSapMipEntry OBJECT-TYPE
|
|
-- SYNTAX TnDot1agCfmSapMipEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The MIP (SAP) entry"
|
|
-- INDEX { tnDot1agCfmSapMipIfIndex, tnDot1agCfmSapMipVlanIdOrNone }
|
|
-- ::= { tnDot1agCfmSapMipTable 1 }
|
|
--
|
|
-- TnDot1agCfmSapMipEntry ::= SEQUENCE {
|
|
-- tnDot1agCfmSapMipIfIndex InterfaceIndex,
|
|
-- tnDot1agCfmSapMipVlanIdOrNone Unsigned32,
|
|
-- tnDot1agCfmSapMipRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- tnDot1agCfmSapMipIfIndex OBJECT-TYPE
|
|
-- SYNTAX InterfaceIndex
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object represents the Bridge Port or aggregated port
|
|
-- on which MEPs or MHFs might be configured."
|
|
-- ::= { tnDot1agCfmSapMipEntry 1 }
|
|
--
|
|
-- tnDot1agCfmSapMipVlanIdOrNone OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VLAN ID to which the MIP is attached, or 0, if none."
|
|
-- ::= { tnDot1agCfmSapMipEntry 2 }
|
|
--
|
|
-- tnDot1agCfmSapMipRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The tnDot1agCfmSapMipRowStatus specifies the ability to enable MIP
|
|
-- creation under a SAP. Existing MIPs associated with the SAP may be
|
|
-- viewed via the tnDot1agCfmStackTable"
|
|
-- ::= { tnDot1agCfmSapMipEntry 3 }
|
|
|
|
--
|
|
-- ******************************************************************
|
|
-- The MIP (SDP) Table
|
|
-- ******************************************************************
|
|
-- tnDot1agCfmSdpMipTable
|
|
-- OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF TnDot1agCfmSdpMipEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A row in the tnDot1agCfmSapMipTable indicates that the
|
|
-- specified SDP-Binding may have a MIP created on the endpoint."
|
|
-- ::= { tnDot1agCfmMip 2 }
|
|
--
|
|
-- tnDot1agCfmSdpMipEntry OBJECT-TYPE
|
|
-- SYNTAX TnDot1agCfmSdpMipEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The MIP (SDP-Binding) entry"
|
|
-- INDEX { tnDot1agCfmSdpMipSvcId,
|
|
-- tnDot1agCfmSdpMipSdpId,
|
|
-- tnDot1agCfmSdpMipVcId
|
|
-- }
|
|
-- ::= { tnDot1agCfmSdpMipTable 1 }
|
|
--
|
|
-- TnDot1agCfmSdpMipEntry ::= SEQUENCE {
|
|
-- tnDot1agCfmSdpMipSvcId TmnxServId,
|
|
-- tnDot1agCfmSdpMipSdpId SdpId,
|
|
-- tnDot1agCfmSdpMipVcId Unsigned32,
|
|
-- tnDot1agCfmSdpMipRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- tnDot1agCfmSdpMipSvcId OBJECT-TYPE
|
|
-- SYNTAX TmnxServId
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpMipSvcId specifies the
|
|
-- service on which the Sdp-Binding MIP is configured."
|
|
-- ::= { tnDot1agCfmSdpMipEntry 1 }
|
|
--
|
|
-- tnDot1agCfmSdpMipSdpId OBJECT-TYPE
|
|
-- SYNTAX SdpId
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpMipSdpId specifies the
|
|
-- Bridge Port or aggregated port on which MEPs or MHFs
|
|
-- might be configured."
|
|
-- ::= { tnDot1agCfmSdpMipEntry 2 }
|
|
--
|
|
-- tnDot1agCfmSdpMipVcId OBJECT-TYPE
|
|
-- SYNTAX Unsigned32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSdpMipVcId specifies, along with
|
|
-- tnDot1agCfmSdpMipSdpId, the SDP Binding for the bridge."
|
|
-- ::= { tnDot1agCfmSdpMipEntry 3 }
|
|
--
|
|
-- tnDot1agCfmSdpMipRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The tnDot1agCfmSapMipRowStatus specifies the ability to enable MIP
|
|
-- creation under a SAP. Existing MIPs associated with the SAP may be
|
|
-- viewed via the tnDot1agCfmSdpBindStackTable"
|
|
-- ::= { tnDot1agCfmSdpMipEntry 4 }
|
|
|
|
--
|
|
-- MEP Eth-Test Result Table
|
|
--
|
|
|
|
-- tnDot1agCfmMepEthTestRsltTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF TnDot1agCfmMepEthTestRsltEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The tnDot1agCfmMepEthTestRsltTable indicates the results of
|
|
-- all eth-tests indexed by the originating MAC addresses.
|
|
--
|
|
-- This table is not persistent over reboots of the chassis."
|
|
-- ::= { tnDot1agCfmMep 2 }
|
|
--
|
|
-- tnDot1agCfmMepEthTestRsltEntry OBJECT-TYPE
|
|
-- SYNTAX TnDot1agCfmMepEthTestRsltEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The MEG result table."
|
|
-- INDEX {
|
|
-- dot1agCfmMdIndex,
|
|
-- dot1agCfmMaIndex,
|
|
-- dot1agCfmMepIdentifier,
|
|
-- tnDot1agCfmMepSrcMacAddress
|
|
-- }
|
|
-- ::= { tnDot1agCfmMepEthTestRsltTable 1 }
|
|
--
|
|
-- TnDot1agCfmMepEthTestRsltEntry ::= SEQUENCE {
|
|
-- tnDot1agCfmMepSrcMacAddress MacAddress,
|
|
-- tnDot1agCfmMepFrameCount Counter32,
|
|
-- tnDot1agCfmMepByteCount Counter32,
|
|
-- tnDot1agCfmMepFailedBits Counter32,
|
|
-- tnDot1agCfmMepCrcFailures Counter32,
|
|
-- tnDot1agCfmMepCurrByteCount Gauge32,
|
|
-- tnDot1agCfmMepCurrFailedBits Gauge32,
|
|
-- tnDot1agCfmMepCurrCrcFailures TruthValue
|
|
-- }
|
|
--
|
|
-- tnDot1agCfmMepSrcMacAddress OBJECT-TYPE
|
|
-- SYNTAX MacAddress
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepSrcMacAddress indicates the MAC address
|
|
-- of the issuer of the eth-test."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 1 }
|
|
--
|
|
-- tnDot1agCfmMepFrameCount OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepFrameCount indicates the number of frames
|
|
-- received from the issuer of the eth-test."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 2 }
|
|
--
|
|
-- tnDot1agCfmMepByteCount OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepByteCount indicates the number of bytes
|
|
-- received from the issuer of the eth-test."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 3 }
|
|
--
|
|
-- tnDot1agCfmMepFailedBits OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepFailedBits indicates the accumulated
|
|
-- number of bits that did not match the test-pattern in all received
|
|
-- Eth-Tst frames since tnDot1agCfmMepEthTestEnable is configured
|
|
-- from 'false' to 'true'."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 4 }
|
|
--
|
|
-- tnDot1agCfmMepCrcFailures OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepCrcFailures indicates the accumulated number
|
|
-- of CRC checksum failures."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 5 }
|
|
--
|
|
-- tnDot1agCfmMepCurrByteCount OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepCurrByteCount indicates the number of bytes
|
|
-- contained in the most recently received Eth-Tst frame Test TLV."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 6 }
|
|
--
|
|
-- tnDot1agCfmMepCurrFailedBits OBJECT-TYPE
|
|
-- SYNTAX Gauge32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepCurrFailedBits indicates the number of bits
|
|
-- that did not match the test-pattern in the most recently received
|
|
-- Eth-Tst frame."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 7 }
|
|
--
|
|
-- tnDot1agCfmMepCurrCrcFailures OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmMepCurrCrcFailures indicates that CRC errors
|
|
-- were detected in the most recently received Eth-Tst frame."
|
|
-- ::= { tnDot1agCfmMepEthTestRsltEntry 8 }
|
|
|
|
--
|
|
-- MEP Delay Result Table
|
|
--
|
|
tnDot1agCfmMepDelayRsltTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepDelayRsltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepDelayRsltTable indicates the results of
|
|
all the One-Way/Two-Way Delay Tests from the originating MAC
|
|
addresses.
|
|
|
|
This table is not persistent over reboots of the chassis."
|
|
::= { tnDot1agCfmMep 3 }
|
|
|
|
tnDot1agCfmMepDelayRsltEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepDelayRsltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEG result table."
|
|
INDEX {
|
|
dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier,
|
|
tnDot1agCfmMepDelaySrcMacAddr,
|
|
tnDot1agCfmMepDelayTestType
|
|
}
|
|
::= { tnDot1agCfmMepDelayRsltTable 1 }
|
|
|
|
TnDot1agCfmMepDelayRsltEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepDelaySrcMacAddr MacAddress,
|
|
tnDot1agCfmMepDelayTestType INTEGER,
|
|
tnDot1agCfmMepDelayTestDelay Integer32,
|
|
tnDot1agCfmMepDelayVariation Unsigned32,
|
|
tnDot1agCfmMepDelayNearEndTestDelay Integer32,
|
|
tnDot1agCfmMepDelayNearEndVariation Unsigned32,
|
|
tnDot1agCfmMepDelayFarEndTestDelay Integer32,
|
|
tnDot1agCfmMepDelayFarEndVariation Unsigned32
|
|
}
|
|
|
|
tnDot1agCfmMepDelaySrcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepDelaySrcMacAddr indicates the source
|
|
MAC address of the issuer of the test."
|
|
::= { tnDot1agCfmMepDelayRsltEntry 1 }
|
|
|
|
tnDot1agCfmMepDelayTestType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneWayTest (1),
|
|
twoWayTest (2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepDelayTestType indicates the type
|
|
of test this row details."
|
|
::= { tnDot1agCfmMepDelayRsltEntry 2 }
|
|
|
|
tnDot1agCfmMepDelayTestDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepDelayTestDelay indicates the amount
|
|
of time, measured in microseconds, from when the test-frame was
|
|
transmitted to the time it was received minus the local processing time
|
|
taken by the remote system.
|
|
|
|
Bi-direction test delay for twoWayTest or oneWayTest"
|
|
::= { tnDot1agCfmMepDelayRsltEntry 3 }
|
|
|
|
tnDot1agCfmMepDelayVariation OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepDelayVariation indicates the amount
|
|
of time delay variation, measured in microseconds, from the two
|
|
most recent time delay measurements.
|
|
|
|
Bi-direction test delay variation for twoWayTest or oneWayTest"
|
|
::= { tnDot1agCfmMepDelayRsltEntry 4 }
|
|
|
|
tnDot1agCfmMepDelayNearEndTestDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end test delay for oneWayTest."
|
|
::= { tnDot1agCfmMepDelayRsltEntry 5 }
|
|
|
|
tnDot1agCfmMepDelayNearEndVariation OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end test delay variation for oneWayTest."
|
|
::= { tnDot1agCfmMepDelayRsltEntry 6 }
|
|
|
|
tnDot1agCfmMepDelayFarEndTestDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end test delay for oneWayTest"
|
|
::= { tnDot1agCfmMepDelayRsltEntry 7 }
|
|
|
|
tnDot1agCfmMepDelayFarEndVariation OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end test delay variation for oneWayTest."
|
|
::= { tnDot1agCfmMepDelayRsltEntry 8 }
|
|
|
|
--************************************************************
|
|
--add for the MEP-CSF function
|
|
--************************************************************
|
|
tnDot1agCfmMepCsfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepCsfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table augments the Maintenance Association End Point (MEP) table
|
|
of the IEEE8021-CFM-MIB."
|
|
::= { tnDot1agCfmMep 4 }
|
|
|
|
tnDot1agCfmMepCsfEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepCsfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the tnDot1agCfmMepCsfTable. This row exists only
|
|
if the association dot1agCfmMepEntry is active."
|
|
AUGMENTS { dot1agCfmMepEntry }
|
|
::= { tnDot1agCfmMepCsfTable 1 }
|
|
|
|
TnDot1agCfmMepCsfEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepCsfInterval Dot1agCfmCcmInterval,
|
|
tnDot1agCfmMepCsfDirection INTEGER,
|
|
tnDot1agCfmMepCsfPriority Integer32
|
|
}
|
|
|
|
tnDot1agCfmMepCsfInterval OBJECT-TYPE
|
|
SYNTAX Dot1agCfmCcmInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between CSF transmissions to be used in the MEP.
|
|
"
|
|
DEFVAL { interval1min }
|
|
::= { tnDot1agCfmMepCsfEntry 1 }
|
|
|
|
tnDot1agCfmMepCsfDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
unidirection (2),
|
|
bi-dirction (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CSF transmissions direction in the MEP
|
|
"
|
|
DEFVAL { disable }
|
|
::= { tnDot1agCfmMepCsfEntry 2 }
|
|
|
|
tnDot1agCfmMepCsfPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for CSFs transmitted by the MEP.
|
|
Default Value is the highest priority value allowed to pass
|
|
through the bridge port for any of this MEPs VIDs.
|
|
The management entity can obtain the default value for this
|
|
variable from the priority regeneration table by extracting the
|
|
highest priority value in this table on this MEPs bridge port.
|
|
"
|
|
DEFVAL { 7 }
|
|
|
|
::= { tnDot1agCfmMepCsfEntry 3 }
|
|
|
|
--
|
|
-- MEP Synthetic Loss Measurement two-way Test Config Table
|
|
--
|
|
tnDot1agCfmMepSlmTWTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepSlmTWTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepSlmTWTestTable consists of the MEP configuration for
|
|
issuing individual Synthetic Loss Measurement tests."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)"
|
|
::= { tnDot1agCfmMep 5 }
|
|
|
|
tnDot1agCfmMepSlmTWTestEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepSlmTWTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepSlmTWTestEntry contains the configuration for
|
|
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
|
|
A row exists for each row in the dot1agCfmMepTable, and is destroyed
|
|
automatically with the removal of a row in the dot1agCfmMepTable.
|
|
|
|
Results from a two-way SLM test are reported in
|
|
tnDot1agCfmMepSlmTestRsltTable with the tnDot1agCfmMepSlmTestType
|
|
set to 'twoWayTest (2)'."
|
|
AUGMENTS { dot1agCfmMepEntry }
|
|
::= { tnDot1agCfmMepSlmTWTestTable 1 }
|
|
|
|
TnDot1agCfmMepSlmTWTestEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepSlmTWTestStatus TmnxEnabledDisabled,
|
|
tnDot1agCfmMepSlmTWTestId Unsigned32,
|
|
tnDot1agCfmMepSlmTWMacAddress MacAddress,
|
|
tnDot1agCfmMepSlmTWPriority Unsigned32,
|
|
tnDot1agCfmMepSlmTWInterval Unsigned32,
|
|
tnDot1agCfmMepSlmTWTimeout Unsigned32,
|
|
tnDot1agCfmMepSlmTWDataSize Unsigned32,
|
|
tnDot1agCfmMepSlmTWSendCount Unsigned32,
|
|
tnDot1agCfmMepSlmTWIntervalRedef Unsigned32,
|
|
tnDot1agCfmMepSlmTWIntrvlUnits INTEGER
|
|
}
|
|
|
|
tnDot1agCfmMepSlmTWTestStatus OBJECT-TYPE
|
|
SYNTAX TmnxEnabledDisabled
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWTestStatus specifies the operational
|
|
state of the two-way Synthetic Loss Measurement (SLM) test.
|
|
|
|
To issue a two-way SLM test the user must issue an SNMP SET on this
|
|
object with a value 'enabled (1)'. To abort the two-way SLM test issue
|
|
an SNMP SET on this object with the value 'disabled (2)'.
|
|
|
|
A read on this object represents the current state of the two-way SLM
|
|
test:
|
|
enabled (1) - The test is actively running, and attempts at
|
|
modifying any two-way SLM object will be rejected
|
|
disabled (2) - The test is not running.
|
|
|
|
Once the test is complete this object will revert to the default value
|
|
'disabled (2)'."
|
|
DEFVAL { disabled }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 1 }
|
|
|
|
tnDot1agCfmMepSlmTWTestId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWTestId indicates the test identifier
|
|
used to initiate the two-way Synthetic Loss Measurement (SLM) test."
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 2 }
|
|
|
|
tnDot1agCfmMepSlmTWMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWMacAddress specifies the MAC address
|
|
used as a target for the two-way Synthetic Loss Measurement (SLM) test.
|
|
|
|
This object MUST be set to a valid MAC Address for proper execution of
|
|
the two-way SLM test."
|
|
DEFVAL { '000000000000'H }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 3 }
|
|
|
|
tnDot1agCfmMepSlmTWPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWPriority specifies the priority used
|
|
in the generated test frame for the two-way Synthetic Loss Measurement
|
|
(SLM) test."
|
|
DEFVAL { 7 }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 4 }
|
|
|
|
tnDot1agCfmMepSlmTWInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..5000)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWInterval specifies the delay, in
|
|
seconds, between Synthetic Loss Measurement (SLM) messages for the
|
|
two-way SLM test.
|
|
|
|
Following are the allowed value for 1830 TPS:
|
|
{33, 100, 1000} - all values in decimilliseconds
|
|
{1, 10, 60, 600} - all values in seconds"
|
|
DEFVAL { 5 }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 5 }
|
|
|
|
tnDot1agCfmMepSlmTWTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWTimeout specifies the time-out value,
|
|
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to
|
|
reply for the two-way SLM test. Upon expiration of the timeout period,
|
|
the agent assumes that the message response will not be received. Any
|
|
response received after the timeout period has expired is silently
|
|
discarded."
|
|
DEFVAL { 5 }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 6 }
|
|
|
|
tnDot1agCfmMepSlmTWDataSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..9558)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWDataSize specifies the data size,
|
|
in bytes, contained in the padding TLV for the two-way Synthetic Loss
|
|
Measurement (SLM) test. A value of zero (0) specifies that no padding
|
|
TLV is inserted in the SLM packet. Any non-zero value will increase
|
|
the packet size by the specified data size plus 3 bytes for the TLV
|
|
header."
|
|
DEFVAL { 0 }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 7 }
|
|
|
|
tnDot1agCfmMepSlmTWSendCount OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..1000)
|
|
UNITS "packets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWSendCount specifies the number of
|
|
Synthetic Loss Measurement (SLM) packets to send during the two-way
|
|
SLM test."
|
|
DEFVAL { 1 }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 8 }
|
|
|
|
tnDot1agCfmMepSlmTWIntervalRedef OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWIntervalRedef specifies the interval
|
|
of SLM frames transmitted.
|
|
The permitted values are 100ms(0),1s (1),10s(2),1m(3),10(4)."
|
|
DEFVAL { 1 }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 9 }
|
|
|
|
tnDot1agCfmMepSlmTWIntrvlUnits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
seconds(1),
|
|
centiseconds(2),
|
|
decimilliseconds(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTWIntrvlUnits, in conjuction with
|
|
tnDot1agCfmMepSlmTWInterval, specifies the interval between Synthetic
|
|
Loss Measurement (SLM) messages sent by the two-way SLM test. For
|
|
example, if tnDot1agCfmMepSlmTWInterval has the value 90, and
|
|
tnDot1agCfmMepSlmTWIntrvlUnits has the value 'centiseconds(2)', the
|
|
interval between SLM messages is 0.9 seconds.
|
|
|
|
For example, if tnDot1agCfmMepSlmTWInterval has the value 33, and
|
|
tnDot1agCfmMepSlmTWIntrvlUnits has the value 'decimilliseconds (3)',
|
|
the interval between SLM messages is 3.3 milliseconds.
|
|
|
|
The intervals supported are shown in the tnDot1agCfmMepSlmTWInterval
|
|
DESCRIPTION clause.
|
|
"
|
|
DEFVAL { seconds }
|
|
::= { tnDot1agCfmMepSlmTWTestEntry 10 }
|
|
|
|
|
|
tnDot1agCfmStatisticsGroup OBJECT IDENTIFIER ::= {tnDot1agCfmGlobalObjs 3}
|
|
|
|
tnDot1agCfmComponentLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmComponentLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmComponentLimitTable stores the current resource counts
|
|
as well as their resource limits for Ethernet Connectivity Fault
|
|
Management (ETH-CFM) components in the SROS series system."
|
|
::= { tnDot1agCfmStatisticsGroup 1 }
|
|
|
|
tnDot1agCfmComponentLimitEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmComponentLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmComponentLimitEntry consists of the resource limits
|
|
for a particular component of ETH-CFM.
|
|
|
|
Rows are managed by the system and can not be created or destroyed using
|
|
SNMP set requests."
|
|
INDEX { tnSysSwitchId,
|
|
tnDot1agCfmCompMajorIndex,
|
|
tnDot1agCfmCompMinorIndex
|
|
}
|
|
::= { tnDot1agCfmComponentLimitTable 1 }
|
|
|
|
TnDot1agCfmComponentLimitEntry ::= SEQUENCE {
|
|
tnDot1agCfmCompMajorIndex Unsigned32,
|
|
tnDot1agCfmCompMinorIndex Unsigned32,
|
|
tnDot1agCfmCompName TNamedItem,
|
|
tnDot1agCfmCompResourceUsage Unsigned32,
|
|
tnDot1agCfmCompResourceLimit Unsigned32
|
|
}
|
|
|
|
tnDot1agCfmCompMajorIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmCompMajorIndex specifies the major identifier
|
|
of the ETH-CFM component."
|
|
::= { tnDot1agCfmComponentLimitEntry 1 }
|
|
|
|
tnDot1agCfmCompMinorIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmCompMinorIndex specifies the minor identifier
|
|
of the ETH-CFM component."
|
|
::= { tnDot1agCfmComponentLimitEntry 2 }
|
|
|
|
tnDot1agCfmCompName OBJECT-TYPE
|
|
SYNTAX TNamedItem
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmCompName indicates the name of the ETH-CFM
|
|
component."
|
|
::= { tnDot1agCfmComponentLimitEntry 3 }
|
|
|
|
tnDot1agCfmCompResourceUsage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmCompResourceUsage indicates the current
|
|
resource usage for the ETH-CFM component."
|
|
::= { tnDot1agCfmComponentLimitEntry 4 }
|
|
|
|
tnDot1agCfmCompResourceLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmCompResourceLimit indicates the maximum
|
|
resource usage limit for the ETH-CFM component for the
|
|
SROS series system."
|
|
::= { tnDot1agCfmComponentLimitEntry 5 }
|
|
|
|
|
|
--
|
|
-- MEP Synthetic Loss Measurement one-way Test Config Table
|
|
--
|
|
tnDot1agCfmMepSlmOWTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepSlmOWTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepSlmOWTestTable consists of the MEP configuration for
|
|
issuing individual Synthetic Loss Measurement one-way tests."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)"
|
|
::= { tnDot1agCfmMep 6 }
|
|
|
|
tnDot1agCfmMepSlmOWTestEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepSlmOWTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepSlmOWTestEntry contains the configuration for
|
|
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
|
|
A row exists for each row in the dot1agCfmMepTable, and is destroyed
|
|
automatically with the removal of a row in the dot1agCfmMepTable.
|
|
|
|
Results from a one-way SLM test are reported in
|
|
tnDot1agCfmMepSlmTestRsltTable with tnDot1agCfmMepSlmTestType set
|
|
to 'oneWayTest (1)'."
|
|
AUGMENTS { dot1agCfmMepEntry }
|
|
::= { tnDot1agCfmMepSlmOWTestTable 1 }
|
|
|
|
TnDot1agCfmMepSlmOWTestEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepSlmOWTestStatus TmnxEnabledDisabled,
|
|
tnDot1agCfmMepSlmOWTestId Unsigned32,
|
|
tnDot1agCfmMepSlmOWMacAddress MacAddress,
|
|
tnDot1agCfmMepSlmOWPriority Unsigned32,
|
|
tnDot1agCfmMepSlmOWInterval Unsigned32,
|
|
tnDot1agCfmMepSlmOWDataSize Unsigned32,
|
|
tnDot1agCfmMepSlmOWSendCount Unsigned32
|
|
}
|
|
|
|
tnDot1agCfmMepSlmOWTestStatus OBJECT-TYPE
|
|
SYNTAX TmnxEnabledDisabled
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmOWTestStatus specifies the operational
|
|
state of the one-way Synthetic Loss Measurement (SLM) test.
|
|
|
|
To issue a one-way SLM test the user must issue an SNMP SET on this
|
|
object with a value 'enabled (1)'. To abort the one-way SLM test issue
|
|
an SNMP SET on this object with the value 'disabled (2)'.
|
|
|
|
A read on this object represents the current state of the one-way SLM
|
|
test:
|
|
enabled (1) - The test is actively running, and attempts at
|
|
modifying any one-way SLM object will be rejected
|
|
disabled (2) - The test is not running.
|
|
|
|
Once the test is complete this object will revert to the default value
|
|
'disabled (2)'."
|
|
DEFVAL { disabled }
|
|
::= { tnDot1agCfmMepSlmOWTestEntry 1 }
|
|
|
|
tnDot1agCfmMepSlmOWTestId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmOWTestId indicates the test identifier
|
|
used to initiate the one-way Synthetic Loss Measurement (SLM) test."
|
|
::= { tnDot1agCfmMepSlmOWTestEntry 2 }
|
|
|
|
tnDot1agCfmMepSlmOWMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmOWMacAddress specifies the MAC address
|
|
used as a target for the one-way Synthetic Loss Measurement (SLM) Test.
|
|
|
|
This object MUST be set to a valid MAC Address for proper execution of
|
|
the one-way SLM test."
|
|
DEFVAL { '000000000000'H }
|
|
::= { tnDot1agCfmMepSlmOWTestEntry 3 }
|
|
|
|
tnDot1agCfmMepSlmOWPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmOWPriority specifies the priority used
|
|
in the generated test frame for the one-way Synthetic Loss Measurement
|
|
(SLM) test."
|
|
DEFVAL { 7 }
|
|
::= { tnDot1agCfmMepSlmOWTestEntry 4 }
|
|
|
|
tnDot1agCfmMepSlmOWInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmOWInterval specifies the delay, in
|
|
seconds, between Synthetic Loss Measurement (SLM) messages for the
|
|
one-way SLM test."
|
|
DEFVAL { 5 }
|
|
::= { tnDot1agCfmMepSlmOWTestEntry 5 }
|
|
|
|
tnDot1agCfmMepSlmOWDataSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1500)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmOWDataSize specifies the data size,
|
|
in bytes, contained in the padding TLV for the one-way Synthetic Loss
|
|
Measurement (SLM) test. A value of zero (0) specifies that no padding
|
|
TLV is inserted in the SLM packet. Any non-zero value will increase
|
|
the packet size by the specified data size plus 3 bytes for the TLV
|
|
header."
|
|
DEFVAL { 0 }
|
|
::= { tnDot1agCfmMepSlmOWTestEntry 6 }
|
|
|
|
tnDot1agCfmMepSlmOWSendCount OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..100)
|
|
UNITS "packets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmOWSendCount specifies the number of
|
|
Synthetic Loss Measurement (SLM) packets to send consecutively during
|
|
the one-way SLM test."
|
|
DEFVAL { 1 }
|
|
::= { tnDot1agCfmMepSlmOWTestEntry 7 }
|
|
|
|
--
|
|
-- MEP Synthetic Loss Measurement Test Results Table
|
|
--
|
|
tnDot1agCfmMepSlmTestRsltTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepSlmTestRsltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepSlmTestRsltTable consists of the results of manually
|
|
triggered Synthetic Loss Measurement tests."
|
|
::= { tnDot1agCfmMep 7 }
|
|
|
|
tnDot1agCfmMepSlmTestRsltEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepSlmTestRsltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepSlmTestRsltEntry contains the results of a
|
|
manually triggered Synthetic Loss Measurement (SLM) test for a
|
|
particular MEP. Rows are auto-generated by the system based on the
|
|
issuing of a SLM test."
|
|
INDEX {
|
|
dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier,
|
|
tnDot1agCfmMepSlmTestType,
|
|
tnDot1agCfmMepSlmRemoteMacAddr
|
|
}
|
|
::= { tnDot1agCfmMepSlmTestRsltTable 1 }
|
|
|
|
TnDot1agCfmMepSlmTestRsltEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepSlmTestType INTEGER,
|
|
tnDot1agCfmMepSlmRemoteMacAddr MacAddress,
|
|
tnDot1agCfmMepSlmTestId Unsigned32,
|
|
tnDot1agCfmMepSlmRemoteMepId Dot1agCfmMepId,
|
|
tnDot1agCfmMepSlmLastTxSeqF Unsigned32,
|
|
tnDot1agCfmMepSlmPacketIn Counter32,
|
|
tnDot1agCfmMepSlmPacketLossIn Integer32,
|
|
tnDot1agCfmMepSlmPacketLossOut Integer32,
|
|
tnDot1agCfmMepSlmPacketUnack Gauge32
|
|
}
|
|
|
|
tnDot1agCfmMepSlmTestType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneWayTest (1),
|
|
twoWayTest (2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTestType specifies whether the
|
|
row for this Synthetic Loss Measurement (SLM) test refers to a two-way
|
|
SLM test."
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 1 }
|
|
|
|
tnDot1agCfmMepSlmRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmRemoteMacAddr specifies the source MAC
|
|
address of the remote node involved in the test."
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 2 }
|
|
|
|
tnDot1agCfmMepSlmTestId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmTestId indicates the test identifier
|
|
that was used to initiate the Synthetic Loss Measurement (SLM) test."
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 3 }
|
|
|
|
tnDot1agCfmMepSlmRemoteMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmRemoteMepId indicates the MEP
|
|
Identifier of the remote node involved in the test."
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 4 }
|
|
|
|
tnDot1agCfmMepSlmLastTxSeqF OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmLastTxSeqF indicates the last
|
|
received sequence number on the local node, transmitted by the
|
|
remote node."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)"
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 5 }
|
|
|
|
tnDot1agCfmMepSlmPacketIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmPacketIn indicates the number of
|
|
packets received during the execution of the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)"
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 6 }
|
|
|
|
tnDot1agCfmMepSlmPacketLossIn OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmPacketLossIn indicates the number of
|
|
packets transmitted from the remote node but not received on the local
|
|
node during the execution of the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)"
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 7 }
|
|
|
|
tnDot1agCfmMepSlmPacketLossOut OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmPacketLossOut indicates the number of
|
|
packets transmitted from the local node but not received on the remote
|
|
node during the execution of the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)"
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 8 }
|
|
|
|
tnDot1agCfmMepSlmPacketUnack OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepSlmPacketUnack indicates the number of
|
|
unacknowledged lost packets during the execution of the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)"
|
|
::= { tnDot1agCfmMepSlmTestRsltEntry 9 }
|
|
|
|
--************************************************************
|
|
-- MEP regular LM function
|
|
--************************************************************
|
|
tnDot1agCfmMepOndemandLmTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepOndemandLmTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepOndemandLmTestTable consists of the MEP configuration for
|
|
issuing individual on-demand Regular Loss Measurement tests."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Frame Loss Measurement (ETH-LM)"
|
|
::= { tnDot1agCfmMep 8 }
|
|
|
|
tnDot1agCfmMepOndemandLmTestEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepOndemandLmTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepOndemandLmTestEntry contains the configuration for
|
|
generating regular Loss Measurement (LM) Tests for a particular MEP.
|
|
A row exists for each row in the dot1agCfmMepTable, and is destroyed
|
|
automatically with the removal of a row in the dot1agCfmMepTable.
|
|
|
|
Results from a on-demand regualar LM test are reported in
|
|
tnDot1agCfmMepOndemandLmTestRsltTable."
|
|
AUGMENTS { dot1agCfmMepEntry }
|
|
::= { tnDot1agCfmMepOndemandLmTestTable 1 }
|
|
|
|
TnDot1agCfmMepOndemandLmTestEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepOndemandLmTestStatus TmnxEnabledDisabled,
|
|
tnDot1agCfmMepOndemandLmDestMacAddress MacAddress,
|
|
tnDot1agCfmMepOndemandLmPriority Unsigned32,
|
|
tnDot1agCfmMepOndemandLmInterval Dot1agCfmCcmInterval,
|
|
tnDot1agCfmMepOndemandLmSendCount Unsigned32,
|
|
tnDot1agCfmMepOndemandLmTimeout Unsigned32
|
|
}
|
|
|
|
tnDot1agCfmMepOndemandLmTestStatus OBJECT-TYPE
|
|
SYNTAX TmnxEnabledDisabled
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmTestStatus specifies the operational
|
|
state of the on-demand regular Loss Measurement (LM) test.
|
|
|
|
To issue a on-demand regular LM test the user must issue an SNMP SET on this
|
|
object with a value 'enabled (1)'. To abort the on-demand regular LM test issue
|
|
an SNMP SET on this object with the value 'disabled (2)'.
|
|
|
|
A read on this object represents the current state of the two-way SLM
|
|
test:
|
|
enabled (1) - The test is actively running, and attempts at
|
|
modifying any on-demand regular LM object will be rejected
|
|
disabled (2) - The test is not running.
|
|
|
|
Once the test is complete this object will revert to the default value
|
|
'disabled (2)'."
|
|
DEFVAL { disabled }
|
|
::= { tnDot1agCfmMepOndemandLmTestEntry 1 }
|
|
|
|
tnDot1agCfmMepOndemandLmDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmMacAddress specifies the MAC address
|
|
used as a target for the on-demand regular Loss Measurement (LM) test.
|
|
|
|
This object MUST be set to a valid MAC Address for proper execution of
|
|
the on-demand regular LM test."
|
|
DEFVAL { '000000000000'H }
|
|
::= { tnDot1agCfmMepOndemandLmTestEntry 2 }
|
|
|
|
tnDot1agCfmMepOndemandLmPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmPriority specifies the priority used
|
|
in the generated test frame for the on-demand regular Loss Measurement
|
|
(LM) test."
|
|
DEFVAL { 7 }
|
|
::= { tnDot1agCfmMepOndemandLmTestEntry 3 }
|
|
|
|
tnDot1agCfmMepOndemandLmInterval OBJECT-TYPE
|
|
SYNTAX Dot1agCfmCcmInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmInterval specifies the delay, in
|
|
seconds, between on-demand regular Loss Measurement (LM) messages for the
|
|
on-demand regular LM test.
|
|
allowed values: 100ms, 1s(default), 10s, 1m, 10m."
|
|
DEFVAL { interval1s }
|
|
::= { tnDot1agCfmMepOndemandLmTestEntry 4 }
|
|
|
|
tnDot1agCfmMepOndemandLmSendCount OBJECT-TYPE
|
|
SYNTAX Unsigned32(2..101)
|
|
UNITS "packets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmSendCount specifies the number of
|
|
LMM packets to send during the on-demand regular
|
|
LM test."
|
|
DEFVAL { 2 }
|
|
::= { tnDot1agCfmMepOndemandLmTestEntry 5 }
|
|
|
|
tnDot1agCfmMepOndemandLmTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000..10000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmTimeout specifies the time-out value,
|
|
in milliseconds, to wait for a response message for the two-way LM test.
|
|
Upon expiration of the timeout period, the agent assumes that the response
|
|
message will not be received. Any response received after the timeout period
|
|
has expired is silently discarded."
|
|
DEFVAL { 1000 }
|
|
::= { tnDot1agCfmMepOndemandLmTestEntry 6 }
|
|
|
|
--
|
|
-- MEP On-demand regular Loss Measurement Test Results Table
|
|
--
|
|
tnDot1agCfmMepOndemandLmTestRsltTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepOndemandLmTestRsltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepOndemandLmTestRsltTable consists of the results of manually
|
|
triggered on-demand regular Loss Measurement tests."
|
|
::= { tnDot1agCfmMep 9 }
|
|
|
|
tnDot1agCfmMepOndemandLmTestRsltEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepOndemandLmTestRsltEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tnDot1agCfmMepOndemandLmTestRsltEntry contains the results of a
|
|
manually triggered on-demand regular Loss Measurement (LM) test.
|
|
Rows are auto-generated by the system based on the
|
|
issuing of a on-demand regular LM test."
|
|
INDEX {
|
|
dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier
|
|
}
|
|
::= { tnDot1agCfmMepOndemandLmTestRsltTable 1 }
|
|
|
|
TnDot1agCfmMepOndemandLmTestRsltEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepOndemandLmTnTF Counter32,
|
|
tnDot1agCfmMepOndemandLmTnLF Counter32,
|
|
tnDot1agCfmMepOndemandLmTfTF Counter32,
|
|
tnDot1agCfmMepOndemandLmTfLF Counter32,
|
|
tnDot1agCfmMepOndemandLmUnack Gauge32,
|
|
tnDot1agCfmMepOndemandLmRemoteMacAddr MacAddress
|
|
}
|
|
|
|
tnDot1agCfmMepOndemandLmTnTF OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmTnTF indicates the total number of
|
|
near-end transmitted service frames from the remote node during the
|
|
execution of the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Frame Single-ended Loss Measurement (ETH-LM)"
|
|
::= { tnDot1agCfmMepOndemandLmTestRsltEntry 1 }
|
|
|
|
tnDot1agCfmMepOndemandLmTnLF OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmTnLF indicates the total number of
|
|
near-end lost service frames on the local node during the execution of
|
|
the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Frame Single-ended Loss Measurement (ETH-LM)"
|
|
::= { tnDot1agCfmMepOndemandLmTestRsltEntry 2 }
|
|
|
|
tnDot1agCfmMepOndemandLmTfTF OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmTfTF indicates the total number of
|
|
far-end transmitted service frames from the local node during the
|
|
execution of the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Frame Single-ended Loss Measurement (ETH-LM)"
|
|
::= { tnDot1agCfmMepOndemandLmTestRsltEntry 3 }
|
|
|
|
tnDot1agCfmMepOndemandLmTfLF OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmTfLF indicates the total number of
|
|
far-end lost service frames on the remote node during the execution of
|
|
the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Frame Single-ended Loss Measurement (ETH-LM)"
|
|
::= { tnDot1agCfmMepOndemandLmTestRsltEntry 4 }
|
|
|
|
tnDot1agCfmMepOndemandLmUnack OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOndemandLmUnack indicates the number of
|
|
unacknowledged lost LM packets during the execution of the test."
|
|
REFERENCE "ITU-T Y.1731 Ethernet Frame Single-ended Loss Measurement (ETH-LM)"
|
|
::= { tnDot1agCfmMepOndemandLmTestRsltEntry 5 }
|
|
|
|
tnDot1agCfmMepOndemandLmRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the remote node involved in the test."
|
|
::= { tnDot1agCfmMepOndemandLmTestRsltEntry 6 }
|
|
|
|
--
|
|
-- MEP one-way Delay Result extension Table
|
|
--
|
|
tnDot1agCfmMepOWDelayRsltExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDot1agCfmMepOWDelayRsltExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepOWDelayRsltExtTable indicates the near-end One-way
|
|
Delay result.
|
|
This table is not persistent over reboots of the chassis."
|
|
::= { tnDot1agCfmMep 10 }
|
|
|
|
tnDot1agCfmMepOWDelayRsltExtEntry OBJECT-TYPE
|
|
SYNTAX TnDot1agCfmMepOWDelayRsltExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The near-end one-way delay test result table."
|
|
INDEX {
|
|
dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier
|
|
}
|
|
::= { tnDot1agCfmMepOWDelayRsltExtTable 1 }
|
|
|
|
TnDot1agCfmMepOWDelayRsltExtEntry ::= SEQUENCE {
|
|
tnDot1agCfmMepOWDelayRsltExtTnFD Integer32,
|
|
tnDot1agCfmMepOWDelayRsltExtTnFDV Integer32
|
|
}
|
|
|
|
tnDot1agCfmMepOWDelayRsltExtTnFD OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepOWDelayRsltExtTnFD indicates one-way
|
|
near-end frame delay from remote MEP to local MEP. It is the amount
|
|
of time, measured in microseconds, from when the test-frame was
|
|
transmitted by the remote MEP to the time it was received local MEP."
|
|
::= { tnDot1agCfmMepOWDelayRsltExtEntry 1 }
|
|
|
|
tnDot1agCfmMepOWDelayRsltExtTnFDV OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tnDot1agCfmMepDelayVariation indicates the amount of
|
|
near-end one-way time delay variation, measured in microseconds,
|
|
from the two most recent near-end one-way time delay measurements"
|
|
::= { tnDot1agCfmMepOWDelayRsltExtEntry 2 }
|
|
|
|
--
|
|
-- Dummy Scalars
|
|
--
|
|
tnDot1agCfmMepScalar1 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A dummy scalar that satisfies a SNMP get request quickly when
|
|
there is no 11QPE24 card provisioned. Otherwise, it has to
|
|
traverse the remaining 11QPE24 MIB to get to the next applicable
|
|
item."
|
|
::= { tnDot1agCfmMep 101 }
|
|
|
|
tnDot1agCfmMepScalar2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { tnDot1agCfmMep 102 }
|
|
|
|
|
|
|
|
--
|
|
-- Notification Objects
|
|
--
|
|
|
|
-- tnDot1agCfmNotifySvcId OBJECT-TYPE
|
|
-- SYNTAX TmnxServId
|
|
-- MAX-ACCESS accessible-for-notify
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The tnDot1agCfmNotifySvcId is used in notifications when a row
|
|
-- consisting of the service identifier may not exist when the trap
|
|
-- is issued."
|
|
-- ::= { tnDot1agCfmNotificationObjs 1 }
|
|
|
|
-- ******************************************************************
|
|
-- The Synthetic Loss Measurement Configuration Objects
|
|
-- ******************************************************************
|
|
-- tnDot1agCfmSLMConfigGroup OBJECT IDENTIFIER ::= {tnDot1agCfmGlobalObjs 2}
|
|
|
|
--
|
|
-- Dummy Scalars
|
|
--
|
|
tnDot1agCfmGlobalScalar1 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A dummy scalar that satisfies a SNMP get request quickly when
|
|
there is no 11QPE24 card provisioned. Otherwise, it has to
|
|
traverse the remaining 11QPE24 MIB to get to the next applicable
|
|
item."
|
|
::= { tnDot1agCfmGlobalObjs 101 }
|
|
|
|
tnDot1agCfmGlobalScalar2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { tnDot1agCfmGlobalObjs 102 }
|
|
|
|
-- tnDot1agCfmSLMInactivityTimer OBJECT-TYPE
|
|
-- SYNTAX Unsigned32 (10..100)
|
|
-- UNITS "seconds"
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The value of tnDot1agCfmSLMInactivityTimer specifies the duration,
|
|
-- in seconds, that the system will maintain Synthetic Loss Measurement
|
|
-- (SLM) reply (SLR) data for individual two-way tests in the absence of
|
|
-- receiving SLM frames.
|
|
--
|
|
-- The system may be blocked in responding to new two-way SLM tests due to
|
|
-- an excessive inactive timer duration. In this case, reducing this
|
|
-- object's value, thus reducing the retention time for existing latent
|
|
-- SLR test data, will help free test resources allowing the system to
|
|
-- respond to new two-way SLM tests."
|
|
-- REFERENCE "ITU-T Y.1731 Ethernet Synthetic Frame Loss Measurement (ETH-SLM)
|
|
-- Section 8.2 Note 2."
|
|
-- DEFVAL { 100 }
|
|
-- ::= { tnDot1agCfmSLMConfigGroup 1 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
tnDot1agCfmMepLbmTestComplete NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1agCfmMepTransmitLbmDestMacAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepLbmTestComplete notification indicates that
|
|
a loopback test has been issued and results are ready."
|
|
::= { tnDot1agNotifications 1 }
|
|
|
|
tnDot1agCfmMepLtmTestComplete NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dot1agCfmMepTransmitLtmSeqNumber
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepLtmTestComplete notification indicates that
|
|
a linktrace test has been issued and results are ready. The
|
|
dot1agCfmMepTransmitLtmSeqNumber indicates the Transaction
|
|
Identifier to use to retrieve the Link-trace results."
|
|
::= { tnDot1agNotifications 2 }
|
|
|
|
-- tnDot1agCfmMepEthTestComplete NOTIFICATION-TYPE
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmMepCurrByteCount,
|
|
-- tnDot1agCfmMepCurrFailedBits,
|
|
-- tnDot1agCfmMepCurrCrcFailures
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The tnDot1agCfmMepEthTestComplete notification indicates that
|
|
-- an eth-test has been issued and results are ready. The
|
|
-- tnDot1agCfmMepCurrByteCount indicates the number of bytes contained in
|
|
-- the frame's Test TLV, and the tnDot1agCfmMepCurrFailedBits and
|
|
-- tnDot1agCfmMepCurrCrcFailures indicate the failure state of the
|
|
-- test. A value of Zero (0) for tnDot1agCfmMepCurrFailedBits and a
|
|
-- value of 'false (2)' for tnDot1agCfmMepCurrCrcFailures indicates
|
|
-- a successful test."
|
|
-- ::= { tnDot1agNotifications 3 }
|
|
|
|
tnDot1agCfmMepDMTestComplete NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tnDot1agCfmMepDelayTestDelay
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepDMTestComplete notification indicates that a
|
|
One-Way-Delay-Test (OWDT) frame, or a Two-Way-Delay-Test (TWDT) response
|
|
was received. For an OWDT frame, traps are raised only when a delay
|
|
threshold of three (3) seconds is exceeded."
|
|
::= { tnDot1agNotifications 4 }
|
|
|
|
tnDot1agCfmMepAisStateChanged NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tnDot1agCfmMepEthRxAis
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepAisStateChanged notification is generated when
|
|
a MEP enters or exits an AIS state."
|
|
::= { tnDot1agNotifications 5 }
|
|
|
|
-- tnDot1agCfmMipEvaluation NOTIFICATION-TYPE
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmNotifySvcId
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The tnDot1agCfmMipEvaluation notification is generated when a
|
|
-- virtual MEP is created or deleted causing MIP reevaluation on the
|
|
-- service. On virtual MEP creation, any MIPs in the service will be
|
|
-- removed. On virtual MEP deletion, the MIPs are reevaluated."
|
|
-- ::= { tnDot1agNotifications 6 }
|
|
|
|
tnDot1agCfmMepSLMTestComplete NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tnDot1agCfmMepSlmTestId,
|
|
tnDot1agCfmMepSlmRemoteMepId,
|
|
tnDot1agCfmMepSlmLastTxSeqF,
|
|
tnDot1agCfmMepSlmPacketIn,
|
|
tnDot1agCfmMepSlmPacketLossIn,
|
|
tnDot1agCfmMepSlmPacketLossOut,
|
|
tnDot1agCfmMepSlmPacketUnack
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepSLMTestComplete notification is generated when
|
|
a two-way Synthetic Loss Measurement (SLM) test is completed."
|
|
::= { tnDot1agNotifications 7 }
|
|
|
|
tnDot1agCfmMepOndemandLmTestComplete NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tnDot1agCfmMepOndemandLmTnTF,
|
|
tnDot1agCfmMepOndemandLmTnLF,
|
|
tnDot1agCfmMepOndemandLmTfTF,
|
|
tnDot1agCfmMepOndemandLmTfLF,
|
|
tnDot1agCfmMepOndemandLmUnack
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tnDot1agCfmMepOndemandLmTestComplete notification is generated when
|
|
a on-demand regular Loss Measurement (LM) test is completed."
|
|
::= { tnDot1agNotifications 8 }
|
|
|
|
--
|
|
-- Conformance Information
|
|
--
|
|
|
|
-- tnDot1agCfmCompliances OBJECT IDENTIFIER ::= { tnDot1agMIBConformance 1 }
|
|
-- tnDot1agCfmGroups OBJECT IDENTIFIER ::= { tnDot1agMIBConformance 2 }
|
|
|
|
-- Compliance statements
|
|
|
|
-- tnDot1agCfmCompliance MODULE-COMPLIANCE
|
|
-- STATUS obsolete
|
|
-- DESCRIPTION
|
|
-- "The compliance statement for revision 1.0 of TIMETRA-IEEE8021-CFM-MIB."
|
|
-- MODULE this module
|
|
-- MANDATORY-GROUPS {
|
|
-- tnDot1agCfmSdpBindStackGroup,
|
|
-- tnDot1agCfmMepGroup,
|
|
-- tnDot1agCfmSapStackGroup
|
|
-- }
|
|
-- ::= { tnDot1agCfmCompliances 1 }
|
|
|
|
-- tnDot1agCfmComplianceV7v0 MODULE-COMPLIANCE
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The compliance statement for revision 7.0 of the 7x50 system"
|
|
-- MODULE this module
|
|
-- MANDATORY-GROUPS {
|
|
-- tnDot1agCfmSdpBindStackGroup,
|
|
-- tnDot1agCfmSapStackGroup,
|
|
-- tnDot1agCfmNotificationGroup,
|
|
-- tmnxY1731CfmNotificationGroup,
|
|
-- tnDot1agCfmMipGroup,
|
|
-- tnDot1agCfmMipNotifyGroup,
|
|
-- tnDot1agCfmMepGroupV7v0
|
|
-- }
|
|
-- ::= { tnDot1agCfmCompliances 2 }
|
|
|
|
-- tnDot1agCfmSdpBindStackGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmSdpBindStackMdIndex,
|
|
-- tnDot1agCfmSdpBindStackMaIndex,
|
|
-- tnDot1agCfmSdpBindStackMepId,
|
|
-- tnDot1agCfmSdpBindStackMacAddress
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management of dot1ag Stack Table applicable
|
|
-- to implementing SDP-Bindings."
|
|
-- ::= { tnDot1agCfmGroups 1 }
|
|
|
|
-- tnDot1agCfmMepGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmMepSdpId,
|
|
-- tnDot1agCfmMepVcId,
|
|
-- tnDot1agCfmMepMacAddress
|
|
-- }
|
|
-- STATUS obsolete
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management of dot1ag MEP Table applicable
|
|
-- to implementing SDP-Bindings."
|
|
-- ::= { tnDot1agCfmGroups 2 }
|
|
|
|
-- tnDot1agCfmSapStackGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmStackMdIndex,
|
|
-- tnDot1agCfmStackMaIndex,
|
|
-- tnDot1agCfmStackMepId,
|
|
-- tnDot1agCfmStackMacAddress
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management of dot1ag Stack Table applicable
|
|
-- to implementing SAP on the 7x50."
|
|
-- ::= { tnDot1agCfmGroups 3 }
|
|
|
|
-- tnDot1agCfmNotificationGroup NOTIFICATION-GROUP
|
|
-- NOTIFICATIONS {
|
|
-- tnDot1agCfmMepLbmTestComplete,
|
|
-- tnDot1agCfmMepLtmTestComplete
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management of dot1ag Notifications applicable
|
|
-- to implementing CFM on the 7x50."
|
|
-- ::= {tnDot1agCfmGroups 4 }
|
|
|
|
-- tnDot1agCfmMipGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmSapMipRowStatus,
|
|
-- tnDot1agCfmSdpMipRowStatus
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management of dot1ag MIP Tables applicable
|
|
-- to implementing MIPs."
|
|
-- ::= { tnDot1agCfmGroups 5 }
|
|
|
|
-- tnDot1agCfmMepGroupV7v0 OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmMaNetTotalMEPCount,
|
|
-- tnDot1agCfmMaMepListMacAddress,
|
|
-- tnDot1agCfmMepSdpId,
|
|
-- tnDot1agCfmMepVcId,
|
|
-- tnDot1agCfmMepMacAddress,
|
|
-- tnDot1agCfmMepAisEnable,
|
|
-- tnDot1agCfmMepAisMegLevel,
|
|
-- tnDot1agCfmMepAisPriority,
|
|
-- tnDot1agCfmMepAisInterval,
|
|
-- tnDot1agCfmMepEthTestEnable,
|
|
-- tnDot1agCfmMepEthTestPattern,
|
|
-- tnDot1agCfmMepEthRxAisInterval,
|
|
-- tnDot1agCfmMepEthRxAis,
|
|
-- tnDot1agCfmMepEthAisTxCount,
|
|
-- tnDot1agCfmMepEthTestMacAddr,
|
|
-- tnDot1agCfmMepEthTestDataLen,
|
|
-- tnDot1agCfmMepEthTestPriority,
|
|
-- tnDot1agCfmMepOWDTMacAddress,
|
|
-- tnDot1agCfmMepOWDTPriority,
|
|
-- tnDot1agCfmMepTWDTMacAddress,
|
|
-- tnDot1agCfmMepTWDTPriority,
|
|
-- tnDot1agCfmMepFrameCount,
|
|
-- tnDot1agCfmMepByteCount,
|
|
-- tnDot1agCfmMepFailedBits,
|
|
-- tnDot1agCfmMepCrcFailures,
|
|
-- tnDot1agCfmMepCurrByteCount,
|
|
-- tnDot1agCfmMepCurrFailedBits,
|
|
-- tnDot1agCfmMepCurrCrcFailures,
|
|
-- tnDot1agCfmMepDelayTestDelay,
|
|
-- tnDot1agCfmMepDelayVariation,
|
|
-- tnDot1agCfmMepDelayNearEndTestDelay,
|
|
-- tnDot1agCfmMepDelayNearEndVariation,
|
|
-- tnDot1agCfmMepDelayFarEndTestDelay,
|
|
-- tnDot1agCfmMepDelayFarEndVariation,
|
|
-- tnDot1agCfmMepCsfInterval
|
|
-- tnDot1agCfmMepCsfDirection
|
|
-- tnDot1agCfmMepCsfPriority
|
|
-- tnDot1agCfmMepSvcId,
|
|
-- tnDot1agCfmMepControlMep,
|
|
-- tnDot1agCfmMepEthTestThreshold,
|
|
-- tnDot1agCfmMepOWDTThreshold,
|
|
-- tnDot1agCfmVStackMdIndex,
|
|
-- tnDot1agCfmVStackMaIndex,
|
|
-- tnDot1agCfmVStackMepId,
|
|
-- tnDot1agCfmVStackMacAddress,
|
|
-- tnDot1agCfmStackMPType,
|
|
-- tnDot1agCfmMepType,
|
|
-- tnDot1agCfmMepFaultPropagation,
|
|
-- tnDot1agCfmMepOWDTDataSize
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management dot1ag and Y.1731 tables applicable
|
|
-- to implementing Virtual MEPs and MEGs on the 7x50, and enabling APS
|
|
-- support."
|
|
-- ::= { tnDot1agCfmGroups 6 }
|
|
|
|
-- tmnxY1731CfmNotificationGroup NOTIFICATION-GROUP
|
|
-- NOTIFICATIONS {
|
|
-- tnDot1agCfmMepEthTestComplete,
|
|
-- tnDot1agCfmMepDMTestComplete,
|
|
-- tnDot1agCfmMepAisStateChanged
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management of Y.1731 Notifications applicable
|
|
-- to implementing CFM on the 7x50."
|
|
-- ::= {tnDot1agCfmGroups 7 }
|
|
|
|
-- tnDot1agCfmNotifyObjsGroup OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmNotifySvcId
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects supporting notifications for revision 7.0 on
|
|
-- Nokia 7x50 SR series systems."
|
|
-- ::= { tnDot1agCfmGroups 8 }
|
|
|
|
-- tnDot1agCfmMipNotifyGroup NOTIFICATION-GROUP
|
|
-- NOTIFICATIONS {
|
|
-- tnDot1agCfmMipEvaluation
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of notification objects for management of dot1ag MIPs."
|
|
-- ::= { tnDot1agCfmGroups 9 }
|
|
|
|
--tnDot1agCfmV9v0Groups OBJECT IDENTIFIER ::= { tnDot1agCfmGroups 13 }
|
|
|
|
--tnDot1agCfmMepSlmGroupV9v0 OBJECT-GROUP
|
|
-- OBJECTS {
|
|
-- tnDot1agCfmSLMInactivityTimer,
|
|
-- tnDot1agCfmMepSlmTWTestStatus,
|
|
-- tnDot1agCfmMepSlmTWTestId,
|
|
-- tnDot1agCfmMepSlmTWMacAddress,
|
|
-- tnDot1agCfmMepSlmTWPriority,
|
|
-- tnDot1agCfmMepSlmTWInterval,
|
|
-- tnDot1agCfmMepSlmTWTimeout,
|
|
-- tnDot1agCfmMepSlmTWDataSize,
|
|
-- tnDot1agCfmMepSlmTWSendCount,
|
|
-- tnDot1agCfmMepSlmTWIntervalRedef,
|
|
-- tnDot1agCfmMepSlmTWIntrvlUnits,
|
|
-- tnDot1agCfmMepSlmOWTestStatus,
|
|
-- tnDot1agCfmCompName,
|
|
-- tnDot1agCfmCompResourceUsage,
|
|
-- tnDot1agCfmCompResourceLimit,
|
|
-- tnDot1agCfmMepSlmOWTestId,
|
|
-- tnDot1agCfmMepSlmOWMacAddress,
|
|
-- tnDot1agCfmMepSlmOWPriority,
|
|
-- tnDot1agCfmMepSlmOWInterval,
|
|
-- tnDot1agCfmMepSlmOWDataSize,
|
|
-- tnDot1agCfmMepSlmOWSendCount,
|
|
-- tnDot1agCfmMepSlmTestId,
|
|
-- tnDot1agCfmMepSlmRemoteMepId,
|
|
-- tnDot1agCfmMepSlmLastTxSeqF,
|
|
-- tnDot1agCfmMepSlmPacketIn,
|
|
-- tnDot1agCfmMepSlmPacketLossIn,
|
|
-- tnDot1agCfmMepSlmPacketLossOut,
|
|
-- tnDot1agCfmMepSlmPacketUnack,
|
|
-- tnDot1agCfmMepOndemandLmTestStatus,
|
|
-- tnDot1agCfmMepOndemandLmDestMacAddress,
|
|
-- tnDot1agCfmMepOndemandLmPriority,
|
|
-- tnDot1agCfmMepOndemandLmInterval,
|
|
-- tnDot1agCfmMepOndemandLmSendCount,
|
|
-- tnDot1agCfmMepOndemandLmTnTF,
|
|
-- tnDot1agCfmMepOndemandLmTnLF,
|
|
-- tnDot1agCfmMepOndemandLmTfTF,
|
|
-- tnDot1agCfmMepOndemandLmTfLF,
|
|
-- tnDot1agCfmMepOndemandLmUnack,
|
|
-- tnDot1agCfmMepOWDelayRsltExtTnFD,
|
|
-- tnDot1agCfmMepOWDelayRsltExtTnFDV
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The group of objects for management of Synthetic Loss Measurement Tests
|
|
-- for the SROS release 9.0."
|
|
-- ::= { tnDot1agCfmV9v0Groups 4 }
|
|
|
|
END
|