1598 lines
55 KiB
Plaintext
1598 lines
55 KiB
Plaintext
TIMETRA-SAS-PORT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
NOTIFICATION-TYPE, Unsigned32,
|
|
Counter32, IpAddress, Counter64,
|
|
Integer32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
|
|
TEXTUAL-CONVENTION, DateAndTime,
|
|
RowStatus, TimeStamp, TimeInterval,
|
|
TruthValue, MacAddress, RowPointer,
|
|
DisplayString FROM SNMPv2-TC
|
|
|
|
timetraSASObjs, timetraSASNotifyPrefix,
|
|
timetraSASConfs, timetraSASModules FROM TIMETRA-SAS-GLOBAL-MIB
|
|
|
|
ServObjDesc
|
|
FROM TIMETRA-SERV-MIB
|
|
|
|
TmnxActionType, TmnxPortID,
|
|
TItemDescription, TNamedItemOrEmpty,
|
|
TNamedItem, TFCName, TQueueId, TmnxServId,
|
|
TmnxOperState, TPortSchedulerPIR,
|
|
TPortSchedulerCIR, TItemLongDescription,
|
|
TNetworkIngressMeterId,TmnxEncapVal FROM TN-TC-MIB
|
|
|
|
timetraSRMIBModules FROM TIMETRA-GLOBAL-MIB
|
|
|
|
tmnxHwObjs, tmnxHwNotification,
|
|
tmnxHwConformance, tmnxChassisIndex,
|
|
tmnxChassisNotifyChassisId,
|
|
TmnxAlarmState, TmnxPortAdminStatus,
|
|
TmnxMDAChanType FROM TIMETRA-CHASSIS-MIB
|
|
|
|
tmnxPortEntry, tmnxPortPortID, tmnxDS1Entry,
|
|
tmnxPortEtherEntry, tmnxDS1PortEntry,
|
|
tmnxPortNotifyPortId FROM TIMETRA-PORT-MIB
|
|
|
|
pethPsePortEntry, pethPsePortIndex,
|
|
pethPsePortPowerClassifications,
|
|
pethPsePortDetectionStatus FROM POWER-ETHERNET-MIB
|
|
|
|
;
|
|
|
|
|
|
tmnxSASPortMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED "0701010000Z"
|
|
ORGANIZATION "Alcatel"
|
|
CONTACT-INFO
|
|
"Alcatel 7x50 Support
|
|
Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml"
|
|
DESCRIPTION
|
|
"This document is the SNMP MIB module to manage and provision the
|
|
hardware components of the Alcatel 7x50 device.
|
|
|
|
Copyright 2003-2014 Alcatel-Lucent. All rights reserved.
|
|
Reproduction of this document is authorized on the condition that
|
|
the foregoing copyright notice is included.
|
|
|
|
This SNMP MIB module (Specification) embodies Alcatel's
|
|
proprietary intellectual property. Alcatel retains
|
|
all title and ownership in the Specification, including any
|
|
revisions.
|
|
|
|
Alcatel grants all interested parties a non-exclusive
|
|
license to use and distribute an unmodified copy of this
|
|
Specification in connection with management of Alcatel
|
|
products, and without fee, provided this copyright notice and
|
|
license appear on all copies.
|
|
|
|
This Specification is supplied 'as is', and Alcatel
|
|
makes no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the Specification."
|
|
|
|
--
|
|
-- Revision History
|
|
--
|
|
REVISION "0801090000Z"
|
|
DESCRIPTION "Rev 1.0 09 Jan 2008 00:00
|
|
This is the 1.0 release of the TIMETRA-SAS-GLOBAL-MIB."
|
|
::= { timetraSASModules 6 }
|
|
|
|
|
|
|
|
tmnxSASPortObjs OBJECT IDENTIFIER ::= { timetraSASObjs 2 }
|
|
tmnxSASPortNotificationObjects OBJECT IDENTIFIER ::= { timetraSASObjs 3 }
|
|
tmnxSASPortStatsObjs OBJECT IDENTIFIER ::= { timetraSASObjs 4 }
|
|
tmnxSASPortConformance OBJECT IDENTIFIER ::= { timetraSASConfs 2 }
|
|
|
|
|
|
portShgInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortShgInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table that contains port split-horizon group
|
|
information. "
|
|
::= { tmnxSASPortObjs 6 }
|
|
|
|
portShgInfoEntry OBJECT-TYPE
|
|
SYNTAX PortShgInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Split-horizon group information about a TLS service."
|
|
INDEX { IMPLIED portShgName }
|
|
::= { portShgInfoTable 1 }
|
|
|
|
PortShgInfoEntry ::=
|
|
SEQUENCE {
|
|
portShgName TNamedItem,
|
|
portShgRowStatus RowStatus,
|
|
portShgInstanceId Unsigned32,
|
|
portShgDescription ServObjDesc,
|
|
portShgLastMgmtChange TimeStamp
|
|
}
|
|
|
|
portShgName OBJECT-TYPE
|
|
SYNTAX TNamedItem
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The value of the object portShgName specifies the name of
|
|
the split-horizon group. "
|
|
::= { portShgInfoEntry 1 }
|
|
|
|
portShgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The value of the object portShgRowStatus specifies the
|
|
status of this row.
|
|
The only values supported during a set operation are
|
|
createAndGo(4) and destroy(6). To delete an entry
|
|
from this table, there should be no port Bindings
|
|
refering to it."
|
|
::= { portShgInfoEntry 2 }
|
|
|
|
|
|
portShgInstanceId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of the object portShgInstanceId indicates the
|
|
instance identifier for the split horizon group."
|
|
::= { portShgInfoEntry 3 }
|
|
|
|
portShgDescription OBJECT-TYPE
|
|
SYNTAX ServObjDesc
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The value of the object portShgDescription specifies
|
|
generic information about this split-horizon group."
|
|
DEFVAL { "" }
|
|
::= { portShgInfoEntry 4 }
|
|
|
|
portShgLastMgmtChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of the object portShgLastMgmtChange indicates the
|
|
value of sysUpTime at the time of the most recent
|
|
management-initiated change to this split-horizon group."
|
|
::= { portShgInfoEntry 5 }
|
|
|
|
sasTmnxPortExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SasTmnxPortExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table has additional information about the 7210 platforms"
|
|
::= { tmnxSASPortObjs 2 }
|
|
|
|
sasTmnxPortExtnEntry OBJECT-TYPE
|
|
SYNTAX SasTmnxPortExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row entry represents a port on a IOM card in a chassis in the
|
|
system. Entries cannot be created and deleted via SNMP SET
|
|
operations. Before an IOM tmnxMDAEntry can be deleted from the
|
|
tmnxMDATable, its supported 'tmnxPortEntries' must be in the proper
|
|
state for removal."
|
|
AUGMENTS { tmnxPortEntry }
|
|
::= { sasTmnxPortExtnTable 1 }
|
|
|
|
SasTmnxPortExtnEntry ::=
|
|
SEQUENCE {
|
|
tmnxPortUplinkMode TruthValue,
|
|
tmnxPortAccessEgressQoSPolicyId Unsigned32,
|
|
tmnxPortNetworkQoSPolicyId Unsigned32,
|
|
tmnxPortShgName TNamedItemOrEmpty,
|
|
tmnxPortUseDei TruthValue,
|
|
tmnxPortOperGrpName TNamedItemOrEmpty,
|
|
tmnxPortMonitorOperGrpName TNamedItemOrEmpty
|
|
}
|
|
|
|
|
|
tmnxPortUplinkMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the tmnxPortUplinkMode is set to true when the tmnxPortMode
|
|
is set to 'access(1)' and the port acts as an uplink.
|
|
'tmnxPortEncaptype' must also be configured 'qinqEncap'
|
|
when using access port as uplink port."
|
|
::= { sasTmnxPortExtnEntry 1 }
|
|
|
|
tmnxPortAccessEgressQoSPolicyId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Qos Policy ID for Access Egress Port"
|
|
DEFVAL { 1 }
|
|
::= { sasTmnxPortExtnEntry 2 }
|
|
|
|
tmnxPortNetworkQoSPolicyId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Network Policy ID "
|
|
DEFVAL { 1 }
|
|
::= { sasTmnxPortExtnEntry 3 }
|
|
|
|
tmnxPortShgName OBJECT-TYPE
|
|
SYNTAX TNamedItemOrEmpty
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Split horizon group to be attached to this port"
|
|
::= { sasTmnxPortExtnEntry 4 }
|
|
|
|
tmnxPortUseDei OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable DEI based policing."
|
|
DEFVAL { false }
|
|
::= { sasTmnxPortExtnEntry 5 }
|
|
|
|
tmnxPortOperGrpName OBJECT-TYPE
|
|
SYNTAX TNamedItemOrEmpty
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System oper group to be attached to this port"
|
|
::= { sasTmnxPortExtnEntry 6 }
|
|
|
|
tmnxPortMonitorOperGrpName OBJECT-TYPE
|
|
SYNTAX TNamedItemOrEmpty
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System monitor oper group to be attached to this port"
|
|
::= { sasTmnxPortExtnEntry 7 }
|
|
|
|
--
|
|
-- Network Port Ingress Stats Table
|
|
--
|
|
tmnxSASPortNetIngressStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TmnxSASPortNetIngressStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Alcatel SAS series network port ingress
|
|
statistics table for providing, via SNMP, the capability of
|
|
retrieving the traffic statistics for the physical Meters
|
|
being used for the ports to forward the network ingress
|
|
traffic."
|
|
::= { tmnxSASPortObjs 3 }
|
|
|
|
tmnxSASPortNetIngressStatsEntry OBJECT-TYPE
|
|
SYNTAX TmnxSASPortNetIngressStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in tmnxSASPortNetIngressStatsTable. Entries are
|
|
created and deleted by the system depending on the meter policy
|
|
being used at the specific port."
|
|
INDEX { tmnxChassisIndex, tmnxPortPortID, tmnxSASPortNetIngressMeterIndex }
|
|
::= { tmnxSASPortNetIngressStatsTable 1 }
|
|
|
|
TmnxSASPortNetIngressStatsEntry ::=
|
|
SEQUENCE {
|
|
tmnxSASPortNetIngressMeterIndex TNetworkIngressMeterId,
|
|
tmnxSASPortNetIngressFwdInProfPkts Counter64,
|
|
tmnxSASPortNetIngressFwdOutProfPkts Counter64,
|
|
tmnxSASPortNetIngressFwdInProfOcts Counter64,
|
|
tmnxSASPortNetIngressFwdOutProfOcts Counter64
|
|
}
|
|
|
|
tmnxSASPortNetIngressMeterIndex OBJECT-TYPE
|
|
SYNTAX TNetworkIngressMeterId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'tmnxSASPortNetIngressQueueIndex' serves as the tertiary index. When used
|
|
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
|
|
identifies a network ingress meter for the specified port in the
|
|
managed system."
|
|
::= { tmnxSASPortNetIngressStatsEntry 1 }
|
|
|
|
tmnxSASPortNetIngressFwdInProfPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxSASPortNetIngressFwdInProfPkts indicates the number of conforming
|
|
network ingress packets forwarded on this port using this meter."
|
|
::= { tmnxSASPortNetIngressStatsEntry 2 }
|
|
|
|
tmnxSASPortNetIngressFwdOutProfPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxSASPortNetIngressFwdOutProfPkts indicates the number of exceeding
|
|
network ingress packets forwarded on this port using this meter."
|
|
::= { tmnxSASPortNetIngressStatsEntry 3 }
|
|
|
|
tmnxSASPortNetIngressFwdInProfOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxSASPortNetIngressFwdInProfOcts indicates the number of conforming
|
|
network ingress octets forwarded on this port using this meter."
|
|
::= { tmnxSASPortNetIngressStatsEntry 4 }
|
|
|
|
tmnxSASPortNetIngressFwdOutProfOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxSASPortNetIngressFwdOutProfOcts indicates the number of exceeding
|
|
network ingress octets forwarded on this port using this meter."
|
|
::= { tmnxSASPortNetIngressStatsEntry 5 }
|
|
|
|
|
|
sasTmnxPortEtherExtnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SasTmnxPortEtherExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table has additional information about the 7210 platforms"
|
|
::= { tmnxSASPortObjs 4 }
|
|
|
|
sasTmnxPortEtherExtnEntry OBJECT-TYPE
|
|
SYNTAX SasTmnxPortEtherExtnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row entry represents an Ethernet port on a IOM card in a
|
|
chassis in the system. Entries cannot be created and
|
|
deleted via SNMP SET operations. Before an IOM 'cardEntry'
|
|
can be deleted from the tmnxMDATable, its supported
|
|
'tmnxPortEntries' and 'tmnxPortEtherEntries' must be in the proper
|
|
state for removal. The tmnxPortEtherEntry contains attributes
|
|
that are unique to the Ethernet TmnxPortType."
|
|
AUGMENTS { tmnxPortEtherEntry }
|
|
::= { sasTmnxPortEtherExtnTable 1 }
|
|
|
|
SasTmnxPortEtherExtnEntry ::=
|
|
SEQUENCE {
|
|
tmnxPortEtherEgressMaxBurst Integer32,
|
|
tmnxPortStatsQueue1PktsFwd TruthValue,
|
|
tmnxPortStatsQueue2PktsFwd TruthValue,
|
|
tmnxPortStatsQueue3PktsFwd TruthValue,
|
|
tmnxPortStatsQueue4PktsFwd TruthValue,
|
|
tmnxPortStatsQueue5PktsFwd TruthValue,
|
|
tmnxPortStatsQueue6PktsFwd TruthValue,
|
|
tmnxPortStatsQueue7PktsFwd TruthValue,
|
|
tmnxPortStatsQueue8PktsFwd TruthValue,
|
|
tmnxPortEtherEgrSchedMode INTEGER,
|
|
tmnxPortEtherLoopback INTEGER,
|
|
tmnxPortEtherIpMTU Unsigned32,
|
|
tmnxPortEtherClockConfig INTEGER,
|
|
tmnxPortLoopbckServId TmnxServId,
|
|
tmnxPortLoopbckSapPortId TmnxPortID,
|
|
tmnxPortLoopbckSapEncapVal TmnxEncapVal,
|
|
tmnxPortLoopbckSrcMacAddr MacAddress,
|
|
tmnxPortLoopbckDstMacAddr MacAddress,
|
|
tmnxPortAccEgrSapQosMarking INTEGER,
|
|
tmnxPortLldpTnlNrstBrdgeDstMac TruthValue,
|
|
tmnxPortEtherDe1OutProfile TruthValue,
|
|
tmnxPortEtherNwAggRateLimit INTEGER,
|
|
tmnxPortEtherNwAggRateLimitCir Integer32,
|
|
tmnxPortEtherNwAggRateLimitPir Integer32,
|
|
tmnxPortEtherDcommStatus TruthValue,
|
|
tmnxPortEtherMulticastIngress INTEGER
|
|
}
|
|
|
|
tmnxPortEtherEgressMaxBurst OBJECT-TYPE
|
|
SYNTAX Integer32 (-1 | 32..16384)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the amount of burst the egress port can generate.
|
|
Its configured in terms of Kilo bits.Its an optional parameter.
|
|
And cannot be used without egress-rate being set."
|
|
DEFVAL { -1 }
|
|
::= { sasTmnxPortEtherExtnEntry 1 }
|
|
|
|
tmnxPortStatsQueue1PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue1PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '0'."
|
|
::= { sasTmnxPortEtherExtnEntry 2 }
|
|
|
|
|
|
tmnxPortStatsQueue2PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue2PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '1'."
|
|
::= { sasTmnxPortEtherExtnEntry 3 }
|
|
|
|
tmnxPortStatsQueue3PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue3PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '2'."
|
|
::= { sasTmnxPortEtherExtnEntry 4 }
|
|
|
|
tmnxPortStatsQueue4PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue4PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '3'."
|
|
::= { sasTmnxPortEtherExtnEntry 5 }
|
|
|
|
tmnxPortStatsQueue5PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue5PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '5'."
|
|
::= { sasTmnxPortEtherExtnEntry 6 }
|
|
|
|
tmnxPortStatsQueue6PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue6PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '6'."
|
|
::= { sasTmnxPortEtherExtnEntry 7 }
|
|
|
|
tmnxPortStatsQueue7PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue7PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '7'."
|
|
::= { sasTmnxPortEtherExtnEntry 8 }
|
|
|
|
tmnxPortStatsQueue8PktsFwd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortStatsQueue8PktsFwd is set to 'true', count the egress
|
|
packets with forwarding class value '8'."
|
|
::= { sasTmnxPortEtherExtnEntry 9 }
|
|
|
|
tmnxPortEtherEgrSchedMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fc-based (1),
|
|
sap-based (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortEtherEgrSchedMode sets the SAP egress scheduler mode. In
|
|
'fc-based' mode the prority of all the egress queues across all the
|
|
SAPs are considered to determine the next queue to schedule. In
|
|
'sap-based' mode the scheduler uses the priority of all the egress
|
|
queues in a SAP to determine the next queue to schedule and uses
|
|
round-robin scheduling mechanism to schedule each of the SAP"
|
|
DEFVAL { fc-based }
|
|
::= { sasTmnxPortEtherExtnEntry 10 }
|
|
|
|
tmnxPortEtherLoopback OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
internal (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortEtherLoopback is set to internal, the ethernet port
|
|
is set to loopback mode. none will clear the loopback"
|
|
DEFVAL { none }
|
|
::= { sasTmnxPortEtherExtnEntry 11 }
|
|
|
|
tmnxPortEtherIpMTU OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|512..9000)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortEtherIpMTU is the IP MTU for interfaces using this
|
|
port"
|
|
::= { sasTmnxPortEtherExtnEntry 12 }
|
|
|
|
tmnxPortEtherClockConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (0),
|
|
automatic (1),
|
|
manual-master (2),
|
|
manual-slave (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the value of tmnxPortEtherClockConfig is 'automatic' the
|
|
Ethernet interface will automatically negotiate clock mastership
|
|
along with other link parameters with the far end. Depending
|
|
upon the capabilities of the two ends, one will be master the
|
|
other will be slave for clocking.
|
|
When the value of tmnxPortEtherClockConfig is 'manual-master', the
|
|
Ethernet interface will negotiate other link parameters with the
|
|
far end except clock mastership. It assumes clock mastership and want
|
|
the other end to be slave.
|
|
When the value is 'manual-slave' this ethernet interface chooses to
|
|
be slave and wants the far end to assume clock mastership.
|
|
For 10 baseT and 100 baseT ethernet interfaces, value of this
|
|
variable should be 'none', as this will not be applicable
|
|
for those interfaces."
|
|
|
|
DEFVAL { notApplicable }
|
|
::= { sasTmnxPortEtherExtnEntry 13 }
|
|
|
|
tmnxPortLoopbckServId OBJECT-TYPE
|
|
SYNTAX TmnxServId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loopback Service Id"
|
|
::= { sasTmnxPortEtherExtnEntry 14 }
|
|
|
|
tmnxPortLoopbckSapPortId OBJECT-TYPE
|
|
SYNTAX TmnxPortID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loopback Sap Port Id"
|
|
::= { sasTmnxPortEtherExtnEntry 15 }
|
|
|
|
tmnxPortLoopbckSapEncapVal OBJECT-TYPE
|
|
SYNTAX TmnxEncapVal
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loopback Sap Encapsulation"
|
|
::= { sasTmnxPortEtherExtnEntry 16 }
|
|
|
|
tmnxPortLoopbckSrcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loopback Source Mac Address"
|
|
::= { sasTmnxPortEtherExtnEntry 17 }
|
|
|
|
tmnxPortLoopbckDstMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loopback Destination Mac Address"
|
|
::= { sasTmnxPortEtherExtnEntry 18 }
|
|
|
|
|
|
tmnxPortAccEgrSapQosMarking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Ethernet Access Egress Sap Qos Marking"
|
|
DEFVAL { enable }
|
|
::= { sasTmnxPortEtherExtnEntry 19 }
|
|
|
|
tmnxPortLldpTnlNrstBrdgeDstMac OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tmnxPortLldpTnlNrstBrdgeDstMac is set to 'true'
|
|
and admin status is disabled lldp pkts will be
|
|
tunnelled"
|
|
DEFVAL { false }
|
|
::= { sasTmnxPortEtherExtnEntry 20 }
|
|
|
|
tmnxPortEtherDe1OutProfile OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxPortEtherDe1OutProfile if enabled
|
|
will consider the value of the DEI(CFI) bit of the incoming
|
|
packet , which if 1 will result in the packet being classified
|
|
as out-profile and in-profile otherwise"
|
|
DEFVAL { false }
|
|
::= { sasTmnxPortEtherExtnEntry 22 }
|
|
|
|
tmnxPortEtherNwAggRateLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (-1 |1..100000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxPortEtherNwAggRateLimit in kbps is used
|
|
to cap network traffic on a hybrid port."
|
|
DEFVAL { -1 }
|
|
::= { sasTmnxPortEtherExtnEntry 23 }
|
|
|
|
tmnxPortEtherNwAggRateLimitCir OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxPortEtherNwAggRateLimit in kbps is used
|
|
to cap network traffic cir rate on a hybrid port."
|
|
DEFVAL { 0 }
|
|
::= { sasTmnxPortEtherExtnEntry 28 }
|
|
|
|
tmnxPortEtherNwAggRateLimitPir OBJECT-TYPE
|
|
SYNTAX Integer32 (-1 | 1..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxPortEtherNwAggRateLimit in kbps is used
|
|
to cap network traffic cir rate on a hybrid port."
|
|
DEFVAL { -1 }
|
|
::= { sasTmnxPortEtherExtnEntry 29 }
|
|
|
|
tmnxPortEtherDcommStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxPortEtherDcommStatus is true if this port
|
|
is decommissioned"
|
|
::= { sasTmnxPortEtherExtnEntry 30 }
|
|
|
|
tmnxPortEtherMulticastIngress OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
l2-mc (1),
|
|
ip-mc (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines multicast ingress lookup type"
|
|
DEFVAL { l2-mc }
|
|
::= { sasTmnxPortEtherExtnEntry 31 }
|
|
|
|
--
|
|
-- Network Port Egress Stats Table
|
|
--
|
|
tmnxPortAccessEgressQueueStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TmnxPortAccessEgressQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Alcatel SAS series access port egress
|
|
statistics table for providing, via SNMP, the capability of
|
|
retrieving the traffic statistics for the physical queues
|
|
being used for the ports to forward the access egress
|
|
traffic."
|
|
::= { tmnxSASPortObjs 7 }
|
|
|
|
tmnxPortAccessEgressQueueStatsEntry OBJECT-TYPE
|
|
SYNTAX TmnxPortAccessEgressQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in tmnxPortAccessEgressQueueStatsTable. Entries are
|
|
created and deleted by the system depending on the queue policy
|
|
being used at the specific port."
|
|
INDEX { tmnxChassisIndex, tmnxPortPortID, tmnxPortAccessEgressQueueStatsIndex }
|
|
::= { tmnxPortAccessEgressQueueStatsTable 1 }
|
|
|
|
TmnxPortAccessEgressQueueStatsEntry ::=
|
|
SEQUENCE {
|
|
tmnxPortAccessEgressQueueStatsIndex TQueueId,
|
|
tmnxPortAccessEgressQueueStatsFwdPkts Counter64,
|
|
tmnxPortAccessEgressQueueStatsFwdOcts Counter64,
|
|
tmnxPortAccessEgressQueueStatsDroPkts Counter64,
|
|
tmnxPortAccessEgressQueueStatsDroOcts Counter64
|
|
}
|
|
|
|
tmnxPortAccessEgressQueueStatsIndex OBJECT-TYPE
|
|
SYNTAX TQueueId (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'tmnxPortAccessEgressQueueIndex' serves as the tertiary index. When used
|
|
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
|
|
identifies a access egress queue for the specified port in the
|
|
managed system."
|
|
::= { tmnxPortAccessEgressQueueStatsEntry 1 }
|
|
|
|
tmnxPortAccessEgressQueueStatsFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortAccessEgressQueueStatsFwdPkts indicates the number of forwarded
|
|
access egress packets forwarded on this port using this queue."
|
|
::= { tmnxPortAccessEgressQueueStatsEntry 2 }
|
|
|
|
tmnxPortAccessEgressQueueStatsFwdOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortAccessEgressQueueStatsFwdOcts indicates the number of forward
|
|
access egress octets forwarded on this port using this queue."
|
|
::= { tmnxPortAccessEgressQueueStatsEntry 3 }
|
|
|
|
tmnxPortAccessEgressQueueStatsDroPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortAccessEgressQueueStatsDroPkts indicates the number of dropped
|
|
access egress packets on this port using this queue."
|
|
::= { tmnxPortAccessEgressQueueStatsEntry 4 }
|
|
|
|
tmnxPortAccessEgressQueueStatsDroOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortAccessEgressQueueStatsDroOcts indicates the number of dropped
|
|
network egress octets on this port using this queue."
|
|
::= { tmnxPortAccessEgressQueueStatsEntry 5 }
|
|
|
|
tmnxPortNetEgressQueueStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TmnxPortNetEgressQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Alcatel SAS series network port egress
|
|
statistics table for providing, via SNMP, the capability of
|
|
retrieving the traffic statistics for the physical queues
|
|
being used for the ports to forward the network egress
|
|
traffic."
|
|
::= { tmnxSASPortObjs 8 }
|
|
|
|
tmnxPortNetEgressQueueStatsEntry OBJECT-TYPE
|
|
SYNTAX TmnxPortNetEgressQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in tmnxPortNetEgressQueueStatsTable. Entries are
|
|
created and deleted by the system depending on the queue policy
|
|
being used at the specific port."
|
|
INDEX { tmnxChassisIndex, tmnxPortPortID, tmnxPortNetEgressQueueStatsIndex }
|
|
::= { tmnxPortNetEgressQueueStatsTable 1 }
|
|
|
|
TmnxPortNetEgressQueueStatsEntry ::=
|
|
SEQUENCE {
|
|
tmnxPortNetEgressQueueStatsIndex TQueueId,
|
|
tmnxPortNetEgressQueueStatsFwdPkts Counter64,
|
|
tmnxPortNetEgressQueueStatsFwdOcts Counter64,
|
|
tmnxPortNetEgressQueueStatsDroPkts Counter64,
|
|
tmnxPortNetEgressQueueStatsDroOcts Counter64,
|
|
tmnxPortNetEgressQueueStatsInProfDroPkts Counter64,
|
|
tmnxPortNetEgressQueueStatsInProfDroOcts Counter64,
|
|
tmnxPortNetEgressQueueStatsOutProfDroPkts Counter64,
|
|
tmnxPortNetEgressQueueStatsOutProfDroOcts Counter64
|
|
}
|
|
|
|
tmnxPortNetEgressQueueStatsIndex OBJECT-TYPE
|
|
SYNTAX TQueueId (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsIndex serves as the tertiary index. When used
|
|
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
|
|
identifies a network egress queue for the specified port in the
|
|
managed system."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 1 }
|
|
|
|
tmnxPortNetEgressQueueStatsFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsFwdPkts indicates the number of forwarded
|
|
network egress packets on this port using this queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 2 }
|
|
|
|
tmnxPortNetEgressQueueStatsFwdOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsFwdOcts indicates the number of forwarded
|
|
network egress octets on this port using this queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 3 }
|
|
|
|
tmnxPortNetEgressQueueStatsDroPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsDroPkts indicates the number of dropped
|
|
network egress packets on this port using this queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 4 }
|
|
|
|
tmnxPortNetEgressQueueStatsDroOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsDroOcts indicates the number of dropped
|
|
network egress octets on this port using this queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 5 }
|
|
|
|
tmnxPortNetEgressQueueStatsInProfDroPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsInProfDroPkts indicates the number of dropped
|
|
network egress octets on this port using this in-profile queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 6 }
|
|
|
|
tmnxPortNetEgressQueueStatsInProfDroOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsInProfDroOcts indicates the number of dropped
|
|
network egress octets on this port using this in-profile queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 7 }
|
|
|
|
tmnxPortNetEgressQueueStatsOutProfDroPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsOutProfDroPkts indicates the number of dropped
|
|
network egress octets on this port using this out-profile queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 8 }
|
|
|
|
tmnxPortNetEgressQueueStatsOutProfDroOcts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxPortNetEgressQueueStatsOutProfDroOcts indicates the number of dropped
|
|
network egress octets on this port using this out-profile queue."
|
|
::= { tmnxPortNetEgressQueueStatsEntry 9 }
|
|
|
|
--
|
|
-- Extensions of Tmnx DS1 Port table
|
|
--
|
|
aluExtTmnxDS1PortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AluExtTmnxDS1PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aluExtTmnxDS1PortTable has an entry for a DS1 physical port."
|
|
::= { tmnxSASPortObjs 9 }
|
|
|
|
aluExtTmnxDS1PortEntry OBJECT-TYPE
|
|
SYNTAX AluExtTmnxDS1PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row entry represents extended functionality of a physical
|
|
DS1 port on Alcatel-Lucent 7210 SAS devices. Entries cannot be
|
|
created or deleted via SNMP SET operations. Entries in this table
|
|
will be created or deleted automatically when entries in the
|
|
tmnxDS1PortTable are created or deleted."
|
|
AUGMENTS { tmnxDS1PortEntry }
|
|
::= { aluExtTmnxDS1PortTable 1 }
|
|
|
|
AluExtTmnxDS1PortEntry ::=
|
|
SEQUENCE {
|
|
aluExtDS1PortLineImpedance INTEGER
|
|
}
|
|
|
|
aluExtDS1PortLineImpedance OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (0),
|
|
impedance75Ohms (1),
|
|
impedance100Ohms (2),
|
|
impedance120Ohms (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of aluExtDS1PortLineImpedance indicates the current line
|
|
impedance set on the physical T1/E1 port.
|
|
|
|
T1 Ports may only be configured to have an impedance of 100 Ohms.
|
|
|
|
E1 Ports may be configured to have an impledance of either 75 or
|
|
120 Ohms where the default impedance is 120 Ohms."
|
|
DEFVAL { impedance100Ohms }
|
|
::= { aluExtTmnxDS1PortEntry 1 }
|
|
|
|
--
|
|
-- Port ACR Clock Stats Table
|
|
--
|
|
aluPortAcrClkStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AluPortAcrClkStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Alcatel-Lucent SAR series port adaptive clock
|
|
recovery (ACR) statistics table for providing, via SNMP, the
|
|
capability of retrieving statistical information relating
|
|
to clock that is derived from the ACR CPIPE PW."
|
|
::= { tmnxSASPortObjs 10 }
|
|
|
|
aluPortAcrClkStatsEntry OBJECT-TYPE
|
|
SYNTAX AluPortAcrClkStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in aluPortAcrClkStatsTable. Entries are
|
|
created and deleted by the system depending port
|
|
configuration."
|
|
INDEX { tmnxChassisIndex, tmnxPortPortID }
|
|
::= { aluPortAcrClkStatsTable 1 }
|
|
|
|
AluPortAcrClkStatsEntry ::=
|
|
SEQUENCE {
|
|
aluLastUpdateTime TimeStamp,
|
|
aluTotalMinutesIn24Hour Unsigned32,
|
|
aluCurrent24HourFreqOffsetMeanPpb Integer32,
|
|
aluCurrent24HourFreqOffsetStdDevPpb Unsigned32,
|
|
aluMaxShortIntervalMinutes Unsigned32,
|
|
aluTotalShortIntervalMinutes Unsigned32,
|
|
aluCurrent1MinValidData TruthValue,
|
|
aluCurrent1MinPhaseErrorMeanPpb Integer32,
|
|
aluCurrent1MinPhaseErrorStdDevNs Unsigned32,
|
|
aluCurrent1MinPhaseErrorMeanNs Integer32,
|
|
aluCurrent1MinFreqOffsetMeanPpb Integer32,
|
|
aluCurrent1MinFreqOffsetStdDevPpb Unsigned32
|
|
}
|
|
|
|
aluLastUpdateTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last time the ACR statistics were updated"
|
|
::= { aluPortAcrClkStatsEntry 1 }
|
|
|
|
aluTotalMinutesIn24Hour OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of minutes in alu24HourFreqOffsetMeanPpb
|
|
and alu24HourFreqOffsetStdDevPpb"
|
|
::= { aluPortAcrClkStatsEntry 2 }
|
|
|
|
aluCurrent24HourFreqOffsetMeanPpb OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aluCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset
|
|
from the local oscillator clock in parts per billion for up to the
|
|
last 24 hour."
|
|
::= { aluPortAcrClkStatsEntry 3 }
|
|
|
|
aluCurrent24HourFreqOffsetStdDevPpb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aluCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the
|
|
frequency offset from the local oscillator clock in parts per billion
|
|
for up to the last 24 hour."
|
|
::= { aluPortAcrClkStatsEntry 4 }
|
|
|
|
aluMaxShortIntervalMinutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'aluMaxShortIntervalMinutes' the maximum number of 'aluStatsShortIntervalIndexes'."
|
|
::= { aluPortAcrClkStatsEntry 5 }
|
|
|
|
aluTotalShortIntervalMinutes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'aluTotalShortIntervalMinutes' is the number of 'aluStatsShortIntervalIndexes'
|
|
that have valid statistics"
|
|
::= { aluPortAcrClkStatsEntry 6 }
|
|
|
|
aluCurrent1MinValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for the first
|
|
interval is valid."
|
|
::= { aluPortAcrClkStatsEntry 7 }
|
|
|
|
aluCurrent1MinPhaseErrorMeanPpb OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean phase error from the local oscillator clock
|
|
in parts per billion during the first interval."
|
|
::= { aluPortAcrClkStatsEntry 8 }
|
|
|
|
aluCurrent1MinPhaseErrorStdDevNs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the phase error from the local
|
|
oscillator clock in nano seconds during the first interval."
|
|
::= { aluPortAcrClkStatsEntry 9 }
|
|
|
|
aluCurrent1MinPhaseErrorMeanNs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean of the phase error from the local
|
|
oscillator clock in nano seconds during the first interval."
|
|
::= { aluPortAcrClkStatsEntry 10 }
|
|
|
|
aluCurrent1MinFreqOffsetMeanPpb OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean frequency offset from the local oscillator clock
|
|
in parts per billion during the first interval."
|
|
::= { aluPortAcrClkStatsEntry 11 }
|
|
|
|
aluCurrent1MinFreqOffsetStdDevPpb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the frequency offset from the
|
|
local oscillator clock in nano seconds during the first interval."
|
|
::= { aluPortAcrClkStatsEntry 12 }
|
|
|
|
--
|
|
-- Port ACR Clock Stats Short Interval Table
|
|
--
|
|
aluPortAcrClkStatsShortIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AluPortAcrClkStatsShortIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port ACR Clock Interval Table contains various
|
|
statistics collected by each adaptively timed port
|
|
over the previous 15 minutes. The past 15 minutes are
|
|
broken into 15 1 minute intervals. Each
|
|
row in this table represents one such interval
|
|
(identified by aluAcrClkIntervalNumber)."
|
|
::= { tmnxSASPortObjs 11 }
|
|
|
|
aluPortAcrClkStatsShortIntervalEntry OBJECT-TYPE
|
|
SYNTAX AluPortAcrClkStatsShortIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Port ACR Clock Interval table."
|
|
INDEX { tmnxChassisIndex, tmnxPortPortID, aluIntervalNumber}
|
|
::= { aluPortAcrClkStatsShortIntervalTable 1 }
|
|
|
|
AluPortAcrClkStatsShortIntervalEntry ::=
|
|
SEQUENCE {
|
|
aluIntervalNumber INTEGER,
|
|
aluIntervalValidData TruthValue,
|
|
aluIntervalUpdateTime TimeStamp,
|
|
aluIntervalPhaseErrorMeanPpb Integer32,
|
|
aluIntervalPhaseErrorStdDevNs Unsigned32,
|
|
aluIntervalPhaseErrorMeanNs Integer32,
|
|
aluIntervalFreqOffsetMeanPpb Integer32,
|
|
aluIntervalFreqOffsetStdDevPpb Unsigned32
|
|
}
|
|
|
|
aluIntervalNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 15, where 1 is the most
|
|
recently completed 1 minute interval and 15 is
|
|
the 1 minutes interval completed 14 minutes prior
|
|
to interval 1."
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 1 }
|
|
|
|
aluIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 2 }
|
|
|
|
aluIntervalUpdateTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The update time of the ACR interval statistics"
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 3 }
|
|
|
|
aluIntervalPhaseErrorMeanPpb OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean phase error from the local oscillator clock
|
|
in parts per billion during the interval."
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 4 }
|
|
|
|
aluIntervalPhaseErrorStdDevNs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the phase error from the local
|
|
oscillator clock in nano seconds during the interval."
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 5 }
|
|
|
|
aluIntervalPhaseErrorMeanNs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean of the phase error from the local
|
|
oscillator clock in nano seconds during the interval."
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 6 }
|
|
|
|
aluIntervalFreqOffsetMeanPpb OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean frequency offset from the local oscillator clock
|
|
in parts per billion during the interval."
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 7 }
|
|
|
|
aluIntervalFreqOffsetStdDevPpb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard deviation of the frequency offset from the
|
|
local oscillator clock in nano seconds during the interval."
|
|
::= { aluPortAcrClkStatsShortIntervalEntry 8 }
|
|
|
|
--
|
|
-- ALU Extensions of Tmnx DS1 table
|
|
--
|
|
aluExtTmnxDS1Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AluExtTmnxDS1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel."
|
|
::= { tmnxSASPortObjs 12 }
|
|
|
|
aluExtTmnxDS1Entry OBJECT-TYPE
|
|
SYNTAX AluExtTmnxDS1Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row entry represents extended functionality of a DS1 physical
|
|
port or channel on Alcatel-Lucent 7210 SAS devices. Entries cannot be
|
|
created or deleted via SNMP SET operations. Entries in this table
|
|
will be created or deleted automatically when entries in the
|
|
tmnxDS1Table are created or deleted."
|
|
AUGMENTS { tmnxDS1Entry }
|
|
::= { aluExtTmnxDS1Table 1 }
|
|
|
|
AluExtTmnxDS1Entry ::=
|
|
SEQUENCE {
|
|
aluExtDS1SignalBitsState OCTET STRING
|
|
}
|
|
|
|
aluExtDS1SignalBitsState OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aluExtDS1SignalBitsState is an array of bytes used to indicate the
|
|
current state of the ABCD signalling bits for all timeslots of a
|
|
DS1/E1.
|
|
|
|
The first half of the array or the 32 most significant bytes describe
|
|
the RX ABCD bits. The other half describes the TX ABCD bits.
|
|
|
|
In each half of the array, every byte represents a particular timeslot.
|
|
The most significant byte represents timeslot 1. The least significant
|
|
byte represents timeslot 32.
|
|
|
|
The byte arrangement is as follows:
|
|
|
|
array index: | 0 1 ... 30 31 | 32 33 ... 62 63 |
|
|
timeslot: | 1 2 ... 31 32 | 1 2 ... 31 32 |
|
|
| <---- RX -----> | <---- TX -----> |
|
|
|
|
Each byte carries ABCD bits in the least significant nibble. The
|
|
byte's most significant bit indicates the validity of the ABCD bits.
|
|
|
|
The bit arrangement is as follows:
|
|
|
|
bit pos: | 7 6 5 4 3 2 1 0 |
|
|
| V x x x A B C D |
|
|
|
|
'V' - validity (0 = invalid, 1 = valid)
|
|
'x' - don't care
|
|
|
|
ABCD bits are marked invalid for a variety of situations (eg.
|
|
tmnxDS1SignalMode not configured for CAS, timeslot(s) not configured
|
|
as part of a channel-group, DS1/E1 status not up, etc.).
|
|
|
|
For CAS DS1 SF, only the AB signalling bits are supported. The remaining
|
|
2 least significant bits in the nibble are undefined.
|
|
"
|
|
::= { aluExtTmnxDS1Entry 3 }
|
|
|
|
--
|
|
-- ALU Extensions of pethPsePortTable
|
|
--
|
|
aluExtPethPsePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AluExtPethPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aluExtPethPsePortTable has an entry for a table of objects
|
|
that display and control the power characteristics of power Ethernet
|
|
ports on a Power Source Entity (PSE) device."
|
|
::= { tmnxSASPortObjs 13 }
|
|
|
|
aluExtPethPsePortEntry OBJECT-TYPE
|
|
SYNTAX AluExtPethPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row entry represents the extended functionality of a power Ethernet
|
|
port"
|
|
AUGMENTS { pethPsePortEntry }
|
|
::= { aluExtPethPsePortTable 1 }
|
|
|
|
AluExtPethPsePortEntry ::=
|
|
SEQUENCE {
|
|
aluExtPethPsePortFaultReason INTEGER,
|
|
aluExtPethPsePortPowerLevel INTEGER,
|
|
aluExtPethPsePortOperStatus INTEGER
|
|
}
|
|
|
|
aluExtPethPsePortFaultReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
dcp (2),
|
|
hicap (3),
|
|
rlow (4),
|
|
detok (5),
|
|
rhigh (6),
|
|
open (7),
|
|
dcn (8),
|
|
tstart (9),
|
|
icv (10),
|
|
tcut (11),
|
|
dis (12),
|
|
sup (13),
|
|
pdeny (14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reason for a detection status failure:
|
|
none (1)
|
|
dcp (2) - Positive DC supply connected at the port
|
|
hicap (3) - High Capacitance at the port
|
|
rlow (4) - Low Resistance at the port
|
|
detok (5) - detection ok
|
|
rhigh (6) - High resistance at the port
|
|
open (7) - open circuit
|
|
dcn (8) - Low impedence to Vee at the port
|
|
tstart (9) - Startup failure at the port
|
|
icv (10) - Current limit disconnect timeout at the port
|
|
tcut (11) - Overcurrent and current limit violation at the port
|
|
dis (12) - DC load disconnect
|
|
sup (13) - Supply fault at the PSE device
|
|
pdeny (14) - Power Denied"
|
|
DEFVAL { none }
|
|
::= { aluExtPethPsePortEntry 1 }
|
|
|
|
|
|
aluExtPethPsePortPowerLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
standard (2),
|
|
plus (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"none (1) The interface does not provide the PoE function.
|
|
standard (2) The interface provides the standard PoE power level.
|
|
plus (3) The interface provides the higher power 'Poe Plus' PSE function"
|
|
DEFVAL { none }
|
|
::= { aluExtPethPsePortEntry 2 }
|
|
|
|
aluExtPethPsePortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable (1),
|
|
on (2),
|
|
off (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of the port PSE."
|
|
DEFVAL { off }
|
|
::= { aluExtPethPsePortEntry 3 }
|
|
|
|
pethPsePortEventInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of the port PSE."
|
|
::= { tmnxSASPortObjs 14 }
|
|
|
|
|
|
--
|
|
-- Virtual port table for loopback
|
|
--
|
|
|
|
tmnxVirtualPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TmnxVirtualPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port table has an entry for each virtual port"
|
|
::= { tmnxSASPortObjs 15 }
|
|
|
|
|
|
tmnxVirtualPortEntry OBJECT-TYPE
|
|
SYNTAX TmnxVirtualPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row entry represents a virtual port"
|
|
INDEX { tmnxChassisIndex,tmnxVirtualPortPortID }
|
|
::= { tmnxVirtualPortTable 1 }
|
|
|
|
TmnxVirtualPortEntry ::=
|
|
SEQUENCE {
|
|
tmnxVirtualPortPortID TmnxPortID,
|
|
tmnxVirtualPortInUse INTEGER,
|
|
tmnxVirtualPortSpeed INTEGER
|
|
}
|
|
|
|
tmnxVirtualPortPortID OBJECT-TYPE
|
|
SYNTAX TmnxPortID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxVirtualPortPortID is an index into this table"
|
|
::= { tmnxVirtualPortEntry 1 }
|
|
|
|
tmnxVirtualPortInUse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-in-use (1),
|
|
mirror (2),
|
|
macswap (3),
|
|
testhead (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxVirtualPortInUse describes whether the virtual port is used by an application or not."
|
|
::= { tmnxVirtualPortEntry 2 }
|
|
|
|
tmnxVirtualPortSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one-gig (1),
|
|
ten-gig (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"tmnxVirtualPortSpeed describes the speed of the virtual ports."
|
|
::= { tmnxVirtualPortEntry 3 }
|
|
|
|
--
|
|
-- NOTIFICATIONS
|
|
--
|
|
|
|
aluExtPethPsePortStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
pethPsePortDetectionStatus,
|
|
pethPsePortPowerClassifications,
|
|
aluExtPethPsePortFaultReason,
|
|
aluExtPethPsePortOperStatus,
|
|
tmnxPortNotifyPortId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when there is a change in Power Classification,
|
|
Detection Status, Fault Reason, or Oper Status on a PoE port."
|
|
::= { tmnxSASPortNotificationObjects 1 }
|
|
|
|
|
|
--
|
|
-- Conformance Information
|
|
--
|
|
|
|
tmnxSASPortCompliances OBJECT IDENTIFIER ::= { tmnxSASPortConformance 1 }
|
|
tmnxSASPortGroups OBJECT IDENTIFIER ::= { tmnxSASPortConformance 2 }
|
|
|
|
tmnxSASPortV1v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxPortUplinkMode,
|
|
tmnxPortAccessEgressQoSPolicyId,
|
|
tmnxPortNetworkQoSPolicyId,
|
|
tmnxPortShgName,
|
|
portShgRowStatus,
|
|
portShgInstanceId,
|
|
portShgDescription,
|
|
portShgLastMgmtChange,
|
|
tmnxSASPortNetIngressFwdInProfPkts,
|
|
tmnxSASPortNetIngressFwdOutProfPkts,
|
|
tmnxSASPortNetIngressFwdInProfOcts,
|
|
tmnxSASPortNetIngressFwdOutProfOcts,
|
|
tmnxPortEtherEgressMaxBurst,
|
|
tmnxPortStatsQueue1PktsFwd,
|
|
tmnxPortStatsQueue2PktsFwd,
|
|
tmnxPortStatsQueue3PktsFwd,
|
|
tmnxPortStatsQueue4PktsFwd,
|
|
tmnxPortStatsQueue5PktsFwd,
|
|
tmnxPortStatsQueue6PktsFwd,
|
|
tmnxPortStatsQueue7PktsFwd,
|
|
tmnxPortStatsQueue8PktsFwd,
|
|
tmnxPortEtherLoopback
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" sas group object definition "
|
|
::= { tmnxSASPortGroups 1 }
|
|
|
|
tmnxSASPortV1v1Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxPortAccessEgressQueueStatsFwdPkts,
|
|
tmnxPortAccessEgressQueueStatsFwdOcts,
|
|
tmnxPortAccessEgressQueueStatsDroPkts,
|
|
tmnxPortAccessEgressQueueStatsDroOcts,
|
|
tmnxPortNetEgressQueueStatsFwdPkts,
|
|
tmnxPortNetEgressQueueStatsFwdOcts,
|
|
tmnxPortNetEgressQueueStatsDroPkts,
|
|
tmnxPortNetEgressQueueStatsDroOcts,
|
|
tmnxPortNetEgressQueueStatsInProfDroPkts,
|
|
tmnxPortNetEgressQueueStatsInProfDroOcts,
|
|
tmnxPortNetEgressQueueStatsOutProfDroPkts,
|
|
tmnxPortNetEgressQueueStatsOutProfDroOcts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" sas group object definition "
|
|
::= { tmnxSASPortGroups 2 }
|
|
|
|
tmnxSASPortV2v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
aluExtDS1PortLineImpedance,
|
|
tmnxPortEtherEgrSchedMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" SAS group object definitions for 2.0 release"
|
|
::= { tmnxSASPortGroups 3 }
|
|
|
|
tmnxSASPortV3v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxPortEtherClockConfig
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" SAS group object definitions for 3.0 release"
|
|
::= { tmnxSASPortGroups 6 }
|
|
|
|
aluPortAcrClkStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
aluLastUpdateTime,
|
|
aluTotalMinutesIn24Hour,
|
|
aluCurrent24HourFreqOffsetMeanPpb,
|
|
aluCurrent24HourFreqOffsetStdDevPpb,
|
|
aluMaxShortIntervalMinutes,
|
|
aluTotalShortIntervalMinutes,
|
|
aluCurrent1MinValidData,
|
|
aluCurrent1MinPhaseErrorMeanPpb,
|
|
aluCurrent1MinPhaseErrorStdDevNs,
|
|
aluCurrent1MinPhaseErrorMeanNs,
|
|
aluCurrent1MinFreqOffsetMeanPpb,
|
|
aluCurrent1MinFreqOffsetStdDevPpb,
|
|
aluIntervalNumber,
|
|
aluIntervalValidData,
|
|
aluIntervalUpdateTime,
|
|
aluIntervalPhaseErrorMeanPpb,
|
|
aluIntervalPhaseErrorStdDevNs,
|
|
aluIntervalPhaseErrorMeanNs,
|
|
aluIntervalFreqOffsetMeanPpb,
|
|
aluIntervalFreqOffsetStdDevPpb
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects supporting retrieval of the ACR clock statistic
|
|
on Alcatel-Lucent SAR series systems"
|
|
::= { tmnxSASPortGroups 4 }
|
|
|
|
tmnxSASPortV4v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxPortAccessEgressQueueStatsFwdPkts,
|
|
tmnxPortAccessEgressQueueStatsFwdOcts,
|
|
tmnxPortAccessEgressQueueStatsDroPkts,
|
|
tmnxPortAccessEgressQueueStatsDroOcts,
|
|
tmnxPortNetEgressQueueStatsFwdPkts,
|
|
tmnxPortNetEgressQueueStatsFwdOcts,
|
|
tmnxPortNetEgressQueueStatsDroPkts,
|
|
tmnxPortNetEgressQueueStatsDroOcts,
|
|
tmnxPortNetEgressQueueStatsInProfDroPkts,
|
|
tmnxPortNetEgressQueueStatsInProfDroOcts,
|
|
tmnxPortNetEgressQueueStatsOutProfDroPkts,
|
|
tmnxPortNetEgressQueueStatsOutProfDroOcts,
|
|
tmnxPortEtherIpMTU,
|
|
tmnxPortEtherClockConfig,
|
|
tmnxPortLoopbckServId,
|
|
tmnxPortLoopbckSapPortId,
|
|
tmnxPortLoopbckSapEncapVal,
|
|
tmnxPortLoopbckSrcMacAddr,
|
|
tmnxPortLoopbckDstMacAddr,
|
|
tmnxPortAccEgrSapQosMarking
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" sas group object definition "
|
|
::= { tmnxSASPortGroups 5 }
|
|
|
|
tmnxSASPortV5v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxPortLldpTnlNrstBrdgeDstMac
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" sas 5.0 release, group object definition "
|
|
::= { tmnxSASPortGroups 7 }
|
|
|
|
tmnxSASPortV6v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxPortEtherNwAggRateLimit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" sas 6.0 release, group object definition "
|
|
::= { tmnxSASPortGroups 8 }
|
|
|
|
--
|
|
--
|
|
|
|
END
|