WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/nokia/TIMETRA-PTP-MIB

4465 lines
172 KiB
Plaintext
Raw Permalink Blame History

TIMETRA-PTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, Integer32, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
DateAndTime, MacAddress, RowPointer,
RowStatus, TEXTUAL-CONVENTION,
TimeStamp, TruthValue
FROM SNMPv2-TC
tmnxChassisIndex,
tmnxChassisNotifyChassisId,
tmnxChassisNotifyHwIndex,
tmnxCpmCardEntry,
tmnxCpmCardOscillatorType
FROM TIMETRA-CHASSIS-MIB
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
TmnxPortEncapType, tmnxPortPortID
FROM TIMETRA-PORT-MIB
TItemDescription, TmnxAdminState,
TmnxEncapVal, TmnxOperState, TmnxPortID
FROM TIMETRA-TC-MIB
vRtrID, vRtrIfEntry
FROM TIMETRA-VRTR-MIB
;
timetraPtpMIBModule MODULE-IDENTITY
LAST-UPDATED "202001010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the
Precision Time Protocol (PTP) components of the Nokia SROS device as
defined in the IEEE Standard for a Precision Clock Synchronization
Protocol for Networked Measurement and Control Systems (IEEE Std
1588-2008).
Copyright (c) 2011-2018 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "202001010000Z"
DESCRIPTION
"Rev 19.10 1 Jan 2020 00:00
19.0 release of the TIMETRA-PTP-MIB."
REVISION "201601010000Z"
DESCRIPTION
"Rev 14.0 1 Jan 2016 00:00
14.0 release of the TIMETRA-PTP-MIB."
REVISION "201501010000Z"
DESCRIPTION
"Rev 13.0 1 Jan 2015 00:00
13.0 release of the TIMETRA-PTP-MIB."
REVISION "201401010000Z"
DESCRIPTION
"Rev 12.0 1 Jan 2014 00:00
12.0 release of the TIMETRA-PTP-MIB."
REVISION "201102010000Z"
DESCRIPTION
"Rev 1.0 1 Feb 2011 00:00
Initial release of the TIMETRA-PTP-MIB."
::= { timetraSRMIBModules 74 }
TmnxPtpClockType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpClockType specifies the type of clock of the network element:
ordinarySlave (1) - The system is always a slave clock in the
master-slave hierarchy. The system derives its
timing from one or more master clocks in the
network.
ordinaryMaster (2) - The system is a grandmaster clock in the
master-slave hierarchy. The system provides
timing to multiple slave clocks in the
network.
boundary (3) - The system is a boundary clock, which may be
anywhere in the master-slave clock hierarchy.
It can obtain timing from a master clock, and
provide timing to multiple slave clocks."
REFERENCE
"IEEE Std 1588-2008 Section 6.5"
SYNTAX INTEGER {
ordinarySlave (1),
ordinaryMaster (2),
boundary (3)
}
TmnxPtpClockIdentity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpClockIdentity specifies the unique identifier used to identify
a network element participating in the Precision Time Protocol (PTP)."
REFERENCE
"IEEE Std 1588-2008 Section 7.5.2.2"
SYNTAX OCTET STRING (SIZE (8))
TmnxPtpClockClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpClockClass specifies the traceability of the time or frequency
distributed by the grandmaster clock."
REFERENCE
"IEEE Std 1588-2008 Section 7.6.2.4"
SYNTAX Unsigned32 (0..255)
TmnxPtpDomain ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpDomain specifies the Precision Time Protocol (PTP) domain.
The value 0 specifies the default domain for IEEE1588-2008. The value
4 specifies the default domain for ITU-T G.8265.1 specification. The
value 24 specifies the default domain for ITU-T G.8275.1
specification."
REFERENCE
"IEEE Std 1588-2008 Section 7.1,
ITU-T G.8265.1, draft V0.3, section 6.7.2, and
ITU-T G.8275.1, section 6.7.2."
SYNTAX Unsigned32 (0..255)
TmnxPtpPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Precision Time Protocol (PTP) priority used both for the value to
advertise in the Announce messages and for the local clock value in
data set comparisons.
It is used by the Best Master Clock Algorithm to determine which clock
should provide timing for the network.
The priority is rated highest (0) to lowest (255)."
REFERENCE
"IEEE Std 1588-2008 Section 7.6.2.2 and 7.6.2.3"
SYNTAX Unsigned32 (0..255)
TmnxPtpProfile ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Precision Time Protocol (PTP) profile specifies the standard to
which PTP conforms.
g8265dot1-2010 - conforms to the PTP profile specified in the
ITU-T G.8265.1 specification
ieee1588-2008 - conforms to the default PTP profile specified in
the IEEE 1588-2008 standard
g8275dot1-2014 - conforms to the PTP profile specified in the
ITU-T G.8275.1 specification
"
REFERENCE
"IEEE Std 1588-2008, ITU-T G.8265.1, and ITU-T G.8275.1"
SYNTAX INTEGER {
g8265dot1-2010 (1),
ieee1588-2008 (2),
g8275dot1-2014 (3),
reserved4 (4)
}
TmnxPtpDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpDirection specifies which direction packets are travelling in
the system:
rx - Packets are being received by the system.
tx - Packets are being transmitted from the system."
SYNTAX INTEGER {
rx (1),
tx (2)
}
TmnxPtpLogInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpLogInterval specifies an interval between PTP packets, or
equivalently, a packet rate. It is specified as the logarithm to the
base 2 of the interval in seconds.
For example, -7 specifies a packet rate of 128 packets per second, and
+4 specifies a packet rate of 1 packet every 16 seconds."
SYNTAX Integer32 (-128..127)
TmnxPtpClockStepType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpClockStepType specifies the clock step:
unknown (0) - It is unknown whether the clock is a one-step or
two-step clock. No announce messages have been
received from the remote clock.
oneStep (1) - The Clock provides time information using a single
event message.
twoStep (2) - The Clock provides time information using the
combination of an event message and a subsequent
general message."
REFERENCE
"IEEE Std 1588-2008 Sections 3.1.21 and 3.1.47"
SYNTAX INTEGER {
unknown (0),
oneStep (1),
twoStep (2)
}
TmnxPtpClockAccuracy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpClockAccuracy specifies the mean of the time frequency error
between the clock under test and a perfect reference clock, over an
ensemble of measurements."
REFERENCE
"IEEE Std 1588-2008 Section 7.6.2.5"
SYNTAX Unsigned32 (0..255)
TmnxPtpClockVariance ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpClockVariance is a measure of the precision of a clock. The
value 65535 indicates that the variance is either too large to be
represented or has not been computed."
REFERENCE
"IEEE Std 1588-2008 Section 7.6.3"
SYNTAX Unsigned32 (0..65535)
TmnxPtpPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpPortState indicates the operational state of a PTP port."
REFERENCE
"IEEE Std 1588-2008 Section 9.2.5"
SYNTAX INTEGER {
notApplicable (0),
initializing (1),
faulty (2),
disabled (3),
listening (4),
preMaster (5),
master (6),
passive (7),
uncalibrated (8),
slave (9)
}
TmnxPtpPortNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpPortNumber specifies a number which identifies a logical access
point of a clock for PTP communications to the communications network.
A PTP ordinary clock has exactly one PTP port, with port number 1. A
PTP boundary clock has multiple ports, each with unique port numbers."
REFERENCE
"IEEE 1588-2008, Section 3.1.35, 7.5.2.3"
SYNTAX Unsigned32 (0..65534)
TmnxPtpTimeStampReferencePoint ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpTimeStampReferencePoint indicates the reference point where a
PTP event packet is timestamped in the SROS system:
unknown (0) - The reference point for the PTP timestamp has not yet
been determined.
port (1) - The PTP packet's timestamp was taken at the physical
port, between the MAC and the PHY. This corresponds
to reference point 'A' in IEEE 1588-2008, Figure 14.
cpm (2) - The PTP packet's timestamp was taken in software in
the operating system kernel on the CPM card. This
corresponds to reference point 'B' in IEEE 1588-2008,
Figure 14."
REFERENCE
"IEEE Std 1588-2008 Section 6.6.5"
SYNTAX INTEGER {
unknown (0),
port (1),
cpm (2)
}
TmnxPtpTransportType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxPtpTransportType indicates the transport type of the PTP packets
exchanged between two PTP clocks.
Values:
none (1) - this value is used to indicate that there is no
exchange of PTP packets between the two PTP clocks
udpIp (2) - the PTP clocks are exchanging PTP packets over
UDP/IP
ethernet (3) - the PTP clocks are exchanging PTP packets directly
over Ethernet"
SYNTAX INTEGER {
none (1),
udpIp (2),
ethernet (3)
}
tmnxPtp1588Objs OBJECT IDENTIFIER ::= { tmnxSRObjs 74 }
tmnxPtp1588ConfigTimeStamps OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 1 }
tmnxPtpPeerConfigTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerConfigTblLastChanged indicates the time, since
system startup, when the tmnxPtpPeerConfigTable last changed state."
::= { tmnxPtp1588ConfigTimeStamps 1 }
tmnxPtpVRtrIfTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrIfTableLastChanged indicates the time, since
system startup, when the tmnxPtpVRtrIfTable last changed state."
::= { tmnxPtp1588ConfigTimeStamps 2 }
tmnxPtpVRtrTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrTableLastChanged indicates the time, since
system startup, when the tmnxPtpVRtrTable last changed state."
::= { tmnxPtp1588ConfigTimeStamps 3 }
tmnxPtpPortTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortTableLastChanged indicates the time, since
system startup, when the tmnxPtpPortTable last changed state."
::= { tmnxPtp1588ConfigTimeStamps 4 }
tmnxPtp1588Configurations OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 2 }
tmnxPtpClockConfig OBJECT IDENTIFIER ::= { tmnxPtp1588Configurations 1 }
tmnxPtpClockAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockAdminState specifies whether PTP 1588 is
enabled on the system or not."
DEFVAL { outOfService }
::= { tmnxPtpClockConfig 1 }
tmnxPtpClockClockType OBJECT-TYPE
SYNTAX TmnxPtpClockType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockClockType specifies the clock behavior of
PTP1588 on the system.
This object can only be modified if tmnxPtpClockAdminState is set to
'outOfService (3)', otherwise an 'inconsistentValue' error is
returned."
::= { tmnxPtpClockConfig 2 }
tmnxPtpClockProfile OBJECT-TYPE
SYNTAX TmnxPtpProfile
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockProfile specifies the conformance of the PTP
system to either the default IEEE 1588-2008 behavior, or one of the
ITU-T profiles.
Modification of this object indirectly resets the value of
tmnxPtpClockDomain to the corresponding default value for the
specified profile.
The configuration of tmnxPtpClockProfile affects the default value for
the sync packet rates of IP and Ethernet ports.
When tmnxPtpClockProfile is changed, any IP peers and Ethernet ports
which are configured at the default sync packet rate for the old
profile are changed to the default value for the new profile. For
example, when tmnxPtpClockProfile changes from 'g8265dot1-2010 (1)' to
'g8275dot1-2014 (3)', any IP peers with tmnxPtpPeerSyncInterval set
to -6 (64 packets per second) will have tmnxPtpPeerSyncInterval changed
to -3 (8 packets per second).
This object can only be modified if tmnxPtpClockAdminState is set to
'outOfService (3)', otherwise an 'inconsistentValue' error is
returned."
::= { tmnxPtpClockConfig 3 }
tmnxPtpClockDomain OBJECT-TYPE
SYNTAX TmnxPtpDomain
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockDomain specifies the domain in which PTP 1588
runs on the system.
The default value of tmnxPtpClockDomain depends on the value of
tmnxPtpClockProfile. If tmnxPtpClockProfile is 'g8265dot1-2010 (1)',
the default value is 4. If tmnxPtpClockProfile is 'ieee1588-2008 (2)',
the default value is 0. If tmnxPtpClockProfile is
'g8275dot1-2014 (3)', the default value is 24.
If tmnxPtpClockProfile is 'g8275dot1-2014 (3)', tmnxPtpClockDomain may
only be set to a value in the range 24-43.
This object can only be modified if tmnxPtpClockAdminState is set to
'outOfService (3)', otherwise an 'inconsistentValue' error is
returned."
::= { tmnxPtpClockConfig 4 }
tmnxPtpClockAnnounceInterval OBJECT-TYPE
SYNTAX TmnxPtpLogInterval (-3..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockAnnounceInterval specifies the packet rate
requested in REQUEST_UNICAST_TRANSMISSION signaling messages for
announce packets.
The default value of tmnxPtpClockAnnounceInterval depends on the value
of tmnxPtpClockProfile. If tmnxPtpClockProfile is 'g8265dot1-2010 (1)'
or 'ieee1588-2008 (2)', the default value is 1, corresponding to an
announce packet rate of 1 packet every 2 seconds.
If tmnxPtpClockProfile is 'g8275dot1-2014 (3)', the default value is -3,
corresponding to an announce packet rate of 8 packets per second.
This object corresponds to the portDS.logAnnounceInterval data set
member of IEEE 1588-2008. In the SROS implementation, all PTP ports
have the same configured value of portDS.logAnnounceInterval.
This object can only be modified if tmnxPtpClockAdminState is set to
'outOfService (3)', otherwise an 'inconsistentValue' error is
returned."
REFERENCE
"ITU-T draft G.8265.1 V0.3, Section 6.5 and
IEEE Std 1588-2008 Sections 7.7.2.2 and 8.2.5.4.1"
::= { tmnxPtpClockConfig 5 }
tmnxPtpClockPriority1 OBJECT-TYPE
SYNTAX TmnxPtpPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockPriority1 specifies the value of the
defaultDS.priority1 data set member defined in IEEE Std 1588-2008.
If tmnxPtpClockProfile is 'g8275dot1-2014 (3)', tmnxPtpClockPriority1
is set to a value of 128, and cannot be changed."
REFERENCE
"IEEE Std 1588-2008, Sections 7.6.2.2 and 8.2.1.4.1, and
ITU-T G.8275.1, Section 6.3.3."
DEFVAL { 128 }
::= { tmnxPtpClockConfig 6 }
tmnxPtpClockPriority2 OBJECT-TYPE
SYNTAX TmnxPtpPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockPriority2 specifies the value of the
defaultDS.priority2 data set member defined in IEEE Std 1588-2008."
REFERENCE
"IEEE Std 1588-2008, Sections 7.6.2.3, and 8.2.1.4.2"
DEFVAL { 128 }
::= { tmnxPtpClockConfig 7 }
tmnxPtpClockNetworkType OBJECT-TYPE
SYNTAX INTEGER {
sonet (1),
sdh (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockNetworkType specifies whether the SROS is
configured to use PTP clock classes corresponding to SONET or SDH
quality levels."
REFERENCE
"ITU-T draft G.8265.1 V0.3, Section 6.7.3.2"
DEFVAL { sdh }
::= { tmnxPtpClockConfig 9 }
tmnxPtpClockAnnoRxTimeout OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPtpClockAnnoRxTimeout specifies the number of
announce intervals that have to occur without receiving a PTP announce
message before the PTP event 'ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES'
occurs.
This object corresponds to the portDS.announceReceiptTimeout data
set member of IEEE 1588-2008. In the SR implementation, all PTP ports
have the same configured value of portDS.announceReceiptTimeout.
This object can only be modified if tmnxPtpClockAdminState is set to
'outOfService (3)', otherwise an 'inconsistentValue' error is
returned."
REFERENCE
"IEEE 1588-2008, Section 7.7.3.1"
DEFVAL { 3 }
::= { tmnxPtpClockConfig 10 }
tmnxPtpClockLocalPriority OBJECT-TYPE
SYNTAX TmnxPtpPriority (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpClockLocalPriority specifies the local priority
used in the best master clock algorithm for the PTP clock when
tmnxPtpClockProfile is 'g8275dot1-2014 (3)'.
This value is not applicable when tmnxPtpClockProfile is configured to
some other value, and cannot be configured.
This object corresponds to the defaultDS.localPriority data set member
defined in ITU-T G.8275.1."
REFERENCE
"ITU-T G.8275.1, Section 6.3.1"
DEFVAL { 128 }
::= { tmnxPtpClockConfig 11 }
tmnxPtpPeerConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPeerConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerConfigTable consists of peer configuration information."
::= { tmnxPtp1588Configurations 3 }
tmnxPtpPeerConfigEntry OBJECT-TYPE
SYNTAX TmnxPtpPeerConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerConfigEntry contains information pertaining to an
individual PTP 1588 peer.
Individual PTP peers are identified by the virtual router identifier
and IP address of the peer PTP clock.
Entries may be created on the base router. In order for an entry to
be created on a virtual router, there must be a corresponding entry
in the tmnxPtpVRtrTable for the virtual router instance.
If tmnxPtpClockClockType is 'ordinarySlave (1)', entries may be
created and deleted via SNMP set operations using tmnxPtpPeerRowStatus.
The tmnxPtpPeerRemoteMaster attribute will be created with a value of
'true', and the tmnxPtpPeerRemoteSlave attribute will be created with
a value of 'false'. Neither or these attributes may be subsequently
changed. These entries correspond to PTP grandmaster or boundary
clocks providing timing information to the local clock.
In order to delete an entry, tmnxPtpPeerAdminState must first be set
to 'outOfService (3)'.
Entries created via SNMP set operations may only be created on a
single virtual router instance.
If tmnxPtpClockClockType is 'ordinaryMaster (2)', entries are
automatically created upon receipt of PTP signaling packets requesting
unicast transmission of PTP packets. Entries cannot be created or
deleted via SNMP set operations. These entries correspond to PTP slave
boundary clocks receiving timing information from the local clock.
These entries are created by the system with tmnxPtpPeerRemoteMaster
set to 'false' and tmnxPtpPeerRemoteSlave set to 'true'.
If tmnxPtpClockClockType is 'boundary (3)', entries corresponding to
grandmaster or boundary PTP clocks providing timing to the local clock
may be created and deleted via SNMP set operations, in the same manner
as when tmnxPtpClockClockType is 'ordinarySlave (1)'. As well, entries
corresponding to slave or boundary PTP clocks receiving timing from
the local clock may be automatically created by the system, in the
same manner as when tmnxPtpClockClockType is 'ordinaryMaster (2)'.
For an individual entry, the value of tmnxPtpPeerRemoteMaster along
with tmnxPtpPeerRemoteSlave indicates the direction of flow of timing
information between the local PTP clock and the peer PTP clock. There
are three cases:
1) If tmnxPtpPeerRemoteMaster is 'true', and tmnxPtpPeerRemoteSlave
is 'false', the peer PTP clock is providing timing to the local
PTP clock.
In this case, PTP Announce, Sync, and Delay Response packets are
sent from the peer PTP clock to the local PTP clock, and PTP Delay
Request packets are sent from the local PTP clock to the peer PTP
clock.
This type of PTP peer may exist when tmnxPtpClockClockType is
either 'ordinarySlave (1)' or boundary (3)'.
2) If tmnxPtpPeerRemoteMaster is 'false', and tmnxPtpPeerRemoteSlave
is 'true', the local PTP clock is providing timing to the peer
PTP clock.
In this case, PTP Announce, Sync, and Delay Response packets are
sent from the local PTP clock to the peer PTP clock, and PTP Delay
Request packets are sent from the peer PTP clock to the local PTP
clock.
This type of PTP peer may exist when tmnxPtpClockClockType is
either 'ordinaryMaster (2)' or boundary (3)'.
3) If tmnxPtpPeerRemoteMaster and tmnxPtpPeerRemoteSlave are both
set to 'true', the local clock and remote PTP clock have a peer
relationship.
Timing information may flow in either direction, depending on the
decision of the PTP Best Master Clock Algorithm running on each
PTP clock.
This type of PTP peer may only exist when tmnxPtpClockClockType is
'boundary (3)'.
There is a system limit to the number of PTP peers that can be
configured via SNMP set operations, and another limit to the number
of PTP peers that can be automatically created upon reception of
PTP signaling packets.
When tmnxPtpClockClockType is 'boundary (3)', a peer entry may be
changed from one that is only receiving timing from the local clock,
to one that may either receive or provide timing, by setting
tmnxPtpPeerRemoteMaster to 'true'."
INDEX {
vRtrID,
tmnxPtpPeerIpAddrType,
tmnxPtpPeerIpAddress
}
::= { tmnxPtpPeerConfigTable 1 }
TmnxPtpPeerConfigEntry ::= SEQUENCE
{
tmnxPtpPeerIpAddrType InetAddressType,
tmnxPtpPeerIpAddress InetAddress,
tmnxPtpPeerRowStatus RowStatus,
tmnxPtpPeerLastChanged TimeStamp,
tmnxPtpPeerAdminState TmnxAdminState,
tmnxPtpPeerPortState TmnxPtpPortState,
tmnxPtpPeerLocalPriority TmnxPtpPriority,
tmnxPtpPeerRemoteMaster TruthValue,
tmnxPtpPeerRemoteSlave TruthValue,
tmnxPtpPeerClockId TmnxPtpClockIdentity,
tmnxPtpPeerLocalPortNumber TmnxPtpPortNumber,
tmnxPtpPeerRemotePortNumber TmnxPtpPortNumber,
tmnxPtpPeerTxTimeStampPoint TmnxPtpTimeStampReferencePoint,
tmnxPtpPeerLastTxPortId TmnxPortID,
tmnxPtpPeerLastTxPortEncapType TmnxPortEncapType,
tmnxPtpPeerLastTxPortEncapValue TmnxEncapVal,
tmnxPtpPeerRxTimeStampPoint TmnxPtpTimeStampReferencePoint,
tmnxPtpPeerLastRxPortId TmnxPortID,
tmnxPtpPeerLastRxPortEncapType TmnxPortEncapType,
tmnxPtpPeerLastRxPortEncapValue TmnxEncapVal,
tmnxPtpPeerSyncInterval TmnxPtpLogInterval
}
tmnxPtpPeerIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerIpAddrType specifies the type of address of
the PTP 1588 peer. This object represents the first index in the
table."
::= { tmnxPtpPeerConfigEntry 1 }
tmnxPtpPeerIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerIpAddress specifies the address of the PTP
1588 peer. This object represents the second index in the table."
::= { tmnxPtpPeerConfigEntry 2 }
tmnxPtpPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerRowStatus specifies the row status of the PTP
1588 peer.
This object controls the creation and deletion of peer PTP grandmaster
and boundary clocks that may provide timing to the local PTP clock.
These PTP peers may only be created when tmnxPtpClockClockType is set
to 'ordinarySlave (1)' or 'boundary (3)'. For these peers,
tmnxPtpPeerRemoteMaster will be set to 'true'.
Before deleting one of these PTP peers, tmnxPtpPeerAdminState must be
set to 'outOfService (3)'.
Peers that correspond to slave or boundary PTP clocks that may receive
timing information from the local clock can not be created or deleted
by the use of this object. Instead, they are dynamically created by
the system through the operation of the Precision Time Protocol."
::= { tmnxPtpPeerConfigEntry 3 }
tmnxPtpPeerLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLastChanged indicates the time, since system
startup, that the PTP 1588 peer was created or modified."
::= { tmnxPtpPeerConfigEntry 4 }
tmnxPtpPeerAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerAdminState specifies the administrative state
of the PTP 1588 peer, that is, whether or not the peer will be used by
the Precision Time Protocol (PTP)."
DEFVAL { inService }
::= { tmnxPtpPeerConfigEntry 5 }
tmnxPtpPeerPortState OBJECT-TYPE
SYNTAX TmnxPtpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPortState indicates the current state of the
PTP port used when communicating with the remote peer.
If tmnxPtpClockClockType is either 'ordinarySlave (1)' or
'ordinaryMaster (2)', the value of tmnxPtpPeerPortState is the same as
tmnxPtpClockPortState.
The value of this object corresponds to the portDS.portState data set
member defined in IEEE Std 1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 8.2.5.3.1"
::= { tmnxPtpPeerConfigEntry 6 }
tmnxPtpPeerLocalPriority OBJECT-TYPE
SYNTAX TmnxPtpPriority (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLocalPriority specifies the local priority
used to choose between PTP masters in the Best Master Clock Algorithm
(BMCA). This object is only relevant when tmnxPtpClockProfile is set
to 'g8265dot1-2010 (1) or 'g8275dot1-2014 (3)'. The parameter is
ignored when tmnxPtpClockProfile is 'ieee1588-2008 (2)'."
REFERENCE
"ITU-T draft G.8265.1 V0.3, Section 6.7.2"
DEFVAL { 128 }
::= { tmnxPtpPeerConfigEntry 7 }
tmnxPtpPeerRemoteMaster OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerRemoteMaster indicates whether or not the peer
is configured as a remote grandmaster or boundary clock that may
provide timing information to the local clock.
If tmnxPtpClockClockType is 'ordinarySlave (1)', all entries in this
table will have tmnxPtpPeerRemoteMaster set to 'true', and it cannot
be changed.
If tmnxPtpClockClockType is 'ordinaryMaster (2)', all entries in this
table will have tmnxPtpPeerRemoteMaster set to 'false', and it cannot
be changed.
If tmnxPtpClockClockType is 'boundary (3)', there may be entries in
this table with tmnxPtpPeerRemoteMaster set to 'false', indicating
that the local clock is only providing timing information to the
remote PTP peer. This peer may be changed to one that may either
receive or provide timing, by setting tmnxPtpPeerRemoteMaster to
'true'.
When the value of this object is 'true', a corresponding row in the
tmnxPtpPeerMasterStatusTable will exist for this peer."
::= { tmnxPtpPeerConfigEntry 8 }
tmnxPtpPeerRemoteSlave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerRemoteSlave specifies whether or not the peer
is acting as a remote slave or boundary clock that may be receiving
timing information from the local clock. Remote slave clocks are
learned by the local clock upon reception of PTP signaling packets,
and cannot be configured via SNMP set operations.
If tmnxPtpPeerRemoteSlave is 'true', it indicates that the local PTP
clock may provide timing information to the PTP peer.
If tmnxPtpClockClockType is 'ordinarySlave (1)', all entries in this
table will have tmnxPtpPeerRemoteSlave set to 'false'.
If tmnxPtpClockClockType is 'ordinaryMaster (2)', all entries in this
table will have tmnxPtpPeerRemoteSlave set to 'true'."
::= { tmnxPtpPeerConfigEntry 9 }
tmnxPtpPeerClockId OBJECT-TYPE
SYNTAX TmnxPtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerClockId indicates the clock identity of the
peer."
::= { tmnxPtpPeerConfigEntry 10 }
tmnxPtpPeerLocalPortNumber OBJECT-TYPE
SYNTAX TmnxPtpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLocalPortNumber indicates the PTP port number
assigned by the local clock and used when communicating with the
remote clock.
If tmnxPtpClockClockType is either 'ordinarySlave (1)' or
'ordinaryMaster (2)', tmnxPtpPeerLocalPortNumber has a value of 1.
The value of this object corresponds to the
portDS.portIdentity.portNumber data set member defined in IEEE Std
1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 7.5.2"
::= { tmnxPtpPeerConfigEntry 11 }
tmnxPtpPeerRemotePortNumber OBJECT-TYPE
SYNTAX TmnxPtpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerRemotePortNumber indicates the PTP port number
used by the remote peer when communicating with the local clock."
REFERENCE
"IEEE Std 1588-2008 Section 7.5.2.3"
::= { tmnxPtpPeerConfigEntry 12 }
tmnxPtpPeerTxTimeStampPoint OBJECT-TYPE
SYNTAX TmnxPtpTimeStampReferencePoint
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerTxTimeStampPoint indicates the reference point
used to generate the PTP timestamp for the last transmitted PTP event
packet. If no event packets have been transmitted, the value is
'unknown(0)'. If PTP event packets are transmitted out an interface
with tmnxPtpVRtrIfAdminState set to 'inService(2)', the value is
'port(1)'. If PTP event packets are transmitted out an interface with
tmnxPtpVRtrIfAdminState set to 'outOfService(3)', the value is
'cpm(2)'."
::= { tmnxPtpPeerConfigEntry 13 }
tmnxPtpPeerLastTxPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLastTxPortId along with
tmnxPtpPeerLastTxPortEncapType and tmnxPtpPeerLastTxPortEncapValue
indicates the last port used to transmit PTP packets to the PTP peer.
If no packets have been transmitted, tmnxPtpPeerLastTxPortId contains
the 'invalid portid' value of 0x1e000000."
::= { tmnxPtpPeerConfigEntry 14 }
tmnxPtpPeerLastTxPortEncapType OBJECT-TYPE
SYNTAX TmnxPortEncapType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLastTxPortEncapType along with
tmnxPtpPeerLastTxPortId and tmnxPtpPeerLastTxPortEncapValue indicates
the last port used to transmit PTP packets to the PTP peer."
::= { tmnxPtpPeerConfigEntry 15 }
tmnxPtpPeerLastTxPortEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLastTxPortEncapValue along with
tmnxPtpPeerLastTxPortId and tmnxPtpPeerLastTxPortEncapType indicates
the last port used to transmit PTP packets to the PTP peer."
::= { tmnxPtpPeerConfigEntry 16 }
tmnxPtpPeerRxTimeStampPoint OBJECT-TYPE
SYNTAX TmnxPtpTimeStampReferencePoint
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerRxTimeStampPoint indicates the reference point
used to generate the PTP timestamp for the last received PTP event
packet. If no event packets have been received, the value is
'unknown(0)'. If PTP event packets are received on an interface
with tmnxPtpVRtrIfAdminState set to 'inService(2)', and the destination
IP address of the received packet is either the local IPv4 address
of the interface or the PTP system IPv4 address, the value is
'port(1)'. Otherwise, the value is 'cpm(2)'."
::= { tmnxPtpPeerConfigEntry 17 }
tmnxPtpPeerLastRxPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLastRxPortId along with
tmnxPtpPeerLastRxPortEncapType and tmnxPtpPeerLastRxPortEncapValue
indicates the last port used to receive PTP packets from the PTP peer.
If no packets have been received, tmnxPtpPeerLastRxPortId contains the
'invalid portid' value of 0x1e000000."
::= { tmnxPtpPeerConfigEntry 18 }
tmnxPtpPeerLastRxPortEncapType OBJECT-TYPE
SYNTAX TmnxPortEncapType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLastRxPortEncapType along with
tmnxPtpPeerLastRxPortId and tmnxPtpPeerLastRxPortEncapValue indicates
the last port used to receive PTP packets from the PTP peer."
::= { tmnxPtpPeerConfigEntry 19 }
tmnxPtpPeerLastRxPortEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerLastRxPortEncapValue along with
tmnxPtpPeerLastRxPortId and tmnxPtpPeerLastRxPortEncapType indicates
the last port used to receive PTP packets from the PTP peer."
::= { tmnxPtpPeerConfigEntry 20 }
tmnxPtpPeerSyncInterval OBJECT-TYPE
SYNTAX TmnxPtpLogInterval (-6..0)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerSyncInterval specifies the packet rate
requested in REQUEST_UNICAST_TRANSMISSION signaling messages for sync
packets when negotiating the sync unicast session with the peer clock.
This object is only applicable to peers that are created and deleted
via SNMP set operations, with tmnxPtpPeerRemoteMaster set to 'true'.
For other peers, this object will have a value of 0, and cannot be
modified.
The default value of tmnxPtpPeerSyncInterval depends on the current
value of tmnxPtpClockProfile. If tmnxPtpClockProfile is
'g8265dot1-2010 (1)' or 'ieee1588-2008 (2)', entries are created with
tmnxPtpPeerSyncInterval set to the default value of -6, or 64 packets
per second. If tmnxPtpClockProfile is 'g8275dot1-2014 (3)', entries
are created with tmnxPtpPeerSyncInterval set to the default value of
-4, or 16 packets per second.
This object can only be modified if tmnxPtpPeerAdminState is set to
'outOfService (3)', otherwise an 'inconsistentValue' error is
returned."
REFERENCE
"ITU-T draft G.8265.1 V0.3, Section 6.5"
::= { tmnxPtpPeerConfigEntry 21 }
tmnxPtpVRtrIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpVRtrIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpVRtrIfTable table contains PTP configuration pertaining to
IP interfaces."
::= { tmnxPtp1588Configurations 4 }
tmnxPtpVRtrIfEntry OBJECT-TYPE
SYNTAX TmnxPtpVRtrIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the PTP configuration corresponding to
an interface configured in a virtual router. Entries are created
and deleted when entries in the vRtrIfTable are created and deleted."
AUGMENTS { vRtrIfEntry }
::= { tmnxPtpVRtrIfTable 1 }
TmnxPtpVRtrIfEntry ::= SEQUENCE
{ tmnxPtpVRtrIfAdminState TmnxAdminState }
tmnxPtpVRtrIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrIfAdminState specifies the administrative
state of the PTP hardware assist configuration of the interface.
If the value is 'inService(2)', the timestamp point for PTP event
packets is configured to be the physical layer. This corresponds to
timestamp point 'A' in IEEE 1588-2008, Figure 14.
If the value is 'outOfService(3)', the timestamp point for PTP event
packets is configured to be the operating system kernel. This
corresponds to timestamp point 'B' in IEEE 1588-2008, Figure 14.
The value may only be configured to 'inService(2)' if all of the
following are true:
1. An IPv4 address is configured against the interface.
2. An Ethernet physical port or link aggregation group (or VLAN tag on
an Ethernet physical port or link aggregation group) has been
associated with the interface.
3. The Ethernet port or all member ports of the link aggregation group
associated with the interface must not be configured for WAN mode.
In other words, the tmnxPortEtherXGigMode attribute for the port
must be either 'notApplicable' or 'lan'.
4. The MDA associated with the interface has synchronous Ethernet
enabled. In other words, the tmnxMDASynchronousEthernet attribute
for the MDA must be 'enabled'.
5. The port or every member port of the link aggregation group
associated with the interface is on an IOM that supports the
hardware assist configuration.
6. The port or every member port of the link aggregation group
associated with the interface supports the hardware assist
configuration.
7. The firmware currently in use by the active CPM support the hardware
assist configuration.
8. The firmware currently in use by the IOM card supports the
hardware assist configuration. After an upgrade from an older
release, the IOM may continue using older firmware. A hard reset
of the IOM is then needed to bring the IOM firmware up to date.
9. The firmware currently in use by the MDA supports the hardware
assist configuration. After an upgrade from an older release, the
MDA may continue using older firmware. A hard reset of the MDA or
IOM is then needed to bring the MDA firmware up to date.
If the physical port bound to the interface is removed,
tmnxPtpVRtrIfAdminState is set to 'outOfService(3)'.
If the IPv4 address assigned to the interface is removed,
tmnxPtpVRtrIfAdminState is set to 'outOfService(3)'."
REFERENCE
"IEEE 1588-2008, section 6.5.5."
::= { tmnxPtpVRtrIfEntry 1 }
tmnxPtpVRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpVRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpVRtrTable consists of PTP configuration and status
information that is specific to a virtual router instance."
::= { tmnxPtp1588Configurations 5 }
tmnxPtpVRtrEntry OBJECT-TYPE
SYNTAX TmnxPtpVRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A tmnxPtpVRtrEntry contains information pertaining to PTP on a
specific virtual router instance.
The system automatically creates one entry in this table that
corresponds to the base router instance. This entry cannot be deleted.
Additional rows in this table may be created and destroyed by SNMP Set
operations on the object tmnxPtpVRtrRowStatus. Rows may only be
created for virtual router instances that correspond to VPRN services.
In order to delete an entry, tmnxPtpVRtrAdminState must first be
set to 'outOfService (3)'. As well, any configured PTP peers must
be first deleted."
INDEX { vRtrID }
::= { tmnxPtpVRtrTable 1 }
TmnxPtpVRtrEntry ::= SEQUENCE
{
tmnxPtpVRtrRowStatus RowStatus,
tmnxPtpVRtrLastChanged TimeStamp,
tmnxPtpVRtrAdminState TmnxAdminState,
tmnxPtpVRtrOperState TmnxOperState,
tmnxPtpVRtrPeerLimit Integer32
}
tmnxPtpVRtrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrRowStatus controls the creation and deletion
of PTP on a virtual router instance.
Before removing PTP configuration from a virtual router instance,
tmnxPtpVRtrAdminState must be set to 'outOfService (3)'."
::= { tmnxPtpVRtrEntry 1 }
tmnxPtpVRtrLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrLastChanged indicates the time, since system
startup, that the configuration of PTP on the virtual router instance
was created or modified."
::= { tmnxPtpVRtrEntry 2 }
tmnxPtpVRtrAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrAdminState specifies the administrative state
of PTP on the virtual router instance.
If tmnxPtpVRtrAdminState is 'outOfService (3)', no PTP packets will be
transmitted on that virtual router instance, and all PTP packets
received on that virtual router instance will be ignored.
For the base routing virtual router instance, tmnxPtpVRtrAdminState is
a copy of the tmnxPtpClockAdminState object, and cannot be modified."
DEFVAL { inService }
::= { tmnxPtpVRtrEntry 3 }
tmnxPtpVRtrOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrOperState indicates the operational state of
PTP on the virtual router instance. The operational state will only be
'inService (2)' if PTP is administratively enabled on the virtual
router instance, if PTP is globally operational on the system, and if
the service is operationally up. In other words, tmnxPtpVRtrAdminState
must be 'inService (2)', tmnxPtpClockOperState must be 'inService (2)',
and svcOperStatus must be 'up (1)'. Otherwise, tmnxPtpVRtrOperState
will be 'outOfService (3)'."
::= { tmnxPtpVRtrEntry 4 }
tmnxPtpVRtrPeerLimit OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpVRtrPeerLimit specifies the maximum number of PTP
peers that may be automatically created by the system on this virtual
router instance.
The SROS system has a global limit on the number of PTP peers that may
be created by the system upon reception of PTP signaling packets.
Specifying a value for tmnxPtpVRtrPeerLimit ensures that a specific
virtual router instance will not exhaust this global resource.
A value of -1 indicates that there is no configured limit for this
virtual router instance, and the system may create PTP peers up to the
global limit of PTP peers on the PTP clock.
A non-zero value does not explicitly reserve resources for this
virtual router instance. However, if all PTP virtual router instances
have configured tmnxPtpVRtrPeerLimit to a value other than -1, and the
total of these limits is less than or equal to the global system limit,
this effectively reserves resources for each virtual router instance.
If the system has already automatically created PTP peers on a virtual
router instance, the limit cannot be reduced lower than the current
count of automatically created PTP peers on the virtual router
instance."
DEFVAL { -1 }
::= { tmnxPtpVRtrEntry 5 }
tmnxPtpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPortTable consists of PTP configuration information that is
specific to Ethernet ports configured for direct transport of PTP over
Ethernet, as described in IEEE 1588-2008, Annex F."
REFERENCE
"IEEE Std 1588-2008 Annex F"
::= { tmnxPtp1588Configurations 6 }
tmnxPtpPortEntry OBJECT-TYPE
SYNTAX TmnxPtpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A tmnxPtpPortEntry contains configuration pertaining to PTP on a
specific Ethernet port.
Rows in this table may be created and destroyed by SNMP Set operations
on the object tmnxPtpPortRowStatus. Each row corresponds to PTP
transport directly over a specific Ethernet port, as described in IEEE
1588-2008, Annex F.
Rows may only be created corresponding to Ethernet ports. Each row
must have a corresponding row in tmnxPortTable, with tmnxPortClass
equal to one of the Ethernet port classes.
Rows may be created corresponding to Ethernet ports configured for no
encapsulation protocol, 802.1Q encapsulation ('dot1q'), or 802.1ad
encapsulation ('qinq'). The tmnxPortEncapType object for the
corresponding row in tmnxPortTable may be either 'nullEncap (1)',
'qEncap (2)', or 'qinqEncap (10)', respectively. Regardless of the
configured encapsulation protocol, PTP packets are always transmitted
'raw', without any VLAN tags.
Rows may not be created when tmnxPtpClockProfile is set to
'g8265dot1-2010 (1)'.
If capable, the Ethernet port will timestamp PTP event packets at the
physical port, between the Ethernet Media Access Control layer and the
physical layer, corresponding to reference point 'A' in IEEE 1588-2008,
Figure 14. If not, all PTP event packets transported over the port
will be timestamped by the operating system kernel on the CPM card,
corresponding to reference point 'B' in IEEE 1588-2008, Figure 14.
Timestamping PTP event packets at the physical port requires the MDA to
be configured for Synchronous Ethernet operation. Specifically,
tmnxMDASynchronousEthernet must be set to 'enabled (1)'. When the
user creates a PTP port entry, if the MDA supports synchronous Ethernet
operation, and the MDA is not already configured for synchronous
Ethernet operation, the system will configure the MDA for synchronous
Ethernet operation.
In order to delete an entry, tmnxPtpPortAdminState must first be set
to 'outOfService (3)'."
INDEX {
tmnxChassisIndex,
tmnxPortPortID
}
::= { tmnxPtpPortTable 1 }
TmnxPtpPortEntry ::= SEQUENCE
{
tmnxPtpPortRowStatus RowStatus,
tmnxPtpPortLastChanged TimeStamp,
tmnxPtpPortAdminState TmnxAdminState,
tmnxPtpPortSyncInterval TmnxPtpLogInterval,
tmnxPtpPortDelayInterval TmnxPtpLogInterval,
tmnxPtpPortMulticastAddress MacAddress,
tmnxPtpPortLocalPriority TmnxPtpPriority,
tmnxPtpPortMasterOnly TruthValue
}
tmnxPtpPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPortRowStatus controls the creation and deletion
of PTP transport directly over Ethernet ports.
Before removing PTP configuration from an Ethernet port,
tmnxPtpPortAdminState must be set to 'outOfService (3)'."
::= { tmnxPtpPortEntry 1 }
tmnxPtpPortLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortLastChanged indicates the time, since system
startup, that the configuration of PTP transport on the Ethernet port
was created or modified."
::= { tmnxPtpPortEntry 2 }
tmnxPtpPortAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPortAdminState specifies the administrative state
of PTP on the Ethernet port.
If tmnxPtpPortAdminState is 'outOfService (3)', no PTP packets will be
directly transmitted on that Ethernet port, and all PTP packets that
are directly received on that Ethernet port will be ignored."
DEFVAL { inService }
::= { tmnxPtpPortEntry 3 }
tmnxPtpPortSyncInterval OBJECT-TYPE
SYNTAX TmnxPtpLogInterval (-6..0)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPortSyncInterval specifies the mean interval
between successive multicast sync packets transmitted on this Ethernet
port when the corresponding PTP port is in the MASTER state.
The default value of tmnxPtpPortSyncInterval depends on the current
value of tmnxPtpClockProfile. If tmnxPtpClockProfile is
'g8265dot1-2010 (1)' or 'ieee1588-2008 (2)', entries are created with
tmnxPtpPortSyncInterval set to the default value of -6, or 64 packets
per second. If tmnxPtpClockProfile is 'g8275dot1-2014 (3)', entries
are created with tmnxPtpPortSyncInterval set to the default value of
-4, or 16 packets per second.
The value of this object corresponds to the
portDS.portIdentity.logSyncInterval data set member defined in IEEE
Std 1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 8.2.5.4.3"
::= { tmnxPtpPortEntry 4 }
tmnxPtpPortDelayInterval OBJECT-TYPE
SYNTAX TmnxPtpLogInterval (-6..0)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPortDelayInterval specifies the mean interval
initially sent between successive multicast delay packets transmitted
on this Ethernet port when the corresponding PTP port is in the SLAVE
state.
It also specifies the minimum interval advertised to slave clocks,
when this port is in the MASTER state.
The default value of tmnxPtpPortDelayInterval depends on the current
value of tmnxPtpClockProfile. If tmnxPtpClockProfile is
'g8265dot1-2010 (1)' or 'ieee1588-2008 (2)', entries are created with
tmnxPtpPortDelayInterval set to the default value of -6, or 64 packets
per second. If tmnxPtpClockProfile is 'g8275dot1-2014 (3)', entries
are created with tmnxPtpPortDelayInterval set to the default value of
-4, or 16 packets per second.
The value of this object corresponds to the
portDS.portIdentity.logMinDelayReqInterval data set member defined in
IEEE Std 1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 8.2.5.3.2"
::= { tmnxPtpPortEntry 5 }
tmnxPtpPortMulticastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPortMulticastAddress specifies the multicast MAC
address that the system will use to transport PTP messages directly
over Ethernet.
The value of tmnxPtpPortMulticastAddress may only be configured to
either 01:1B:19:00:00:00 or 01:80:C2:00:00:0E.
The local clock will transmit all PTP packets using the value
configured in tmnxPtpPortMulticastAddress as the destination MAC
address in all Ethernet frames. Similarly, the local clock will only
process received PTP Ethernet packets that have a destination MAC
address equal to tmnxPtpPortMulticastAddress."
REFERENCE
"IEEE Std 1588-2008 Annex F"
DEFVAL { '011B19000000'H }
::= { tmnxPtpPortEntry 6 }
tmnxPtpPortLocalPriority OBJECT-TYPE
SYNTAX TmnxPtpPriority (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPortLocalPriority specifies the local priority
used in the best master clock algorithm for the PTP port when
tmnxPtpClockProfile is 'g8275dot1-2014 (3)'.
This value is not applicable when tmnxPtpClockProfile is configured to
some other value, and cannot be configured.
This object corresponds to the portDS.localPriority data set member
defined in ITU-T G.8275.1."
REFERENCE
"ITU-T G.8275.1, Section 6.3.1"
DEFVAL { 128 }
::= { tmnxPtpPortEntry 7 }
tmnxPtpPortMasterOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPtpPortMasterOnly specifies whether the PTP clock can
synchronize using PTP timestamp information exchanged over this PTP
Ethernet port.
This value is only applicable when tmnxPtpClockProfile is configured
to 'g8275dot1-2014 (3)'.
This object corresponds to the portDS.notSlave data set member defined
in ITU-T G.8275.1."
REFERENCE
"ITU-T G.8275.1, Section 6.3.1"
::= { tmnxPtpPortEntry 8 }
tmnxPtp1588Status OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 3 }
tmnxPtpClockOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpClockOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpClockOperTable contains the operational information for the
individual Precision Timing Protocol (PTP) for each CPM card in the
SROS system."
::= { tmnxPtp1588Status 1 }
tmnxPtpClockOperEntry OBJECT-TYPE
SYNTAX TmnxPtpClockOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpClockOperEntry consists of the operational information for
the PTP clock on an individual CPM card."
AUGMENTS { tmnxCpmCardEntry }
::= { tmnxPtpClockOperTable 1 }
TmnxPtpClockOperEntry ::= SEQUENCE
{
tmnxPtpClockIdentity TmnxPtpClockIdentity,
tmnxPtpClockOperState TmnxOperState,
tmnxPtpClockStepType TmnxPtpClockStepType,
tmnxPtpClockClass TmnxPtpClockClass,
tmnxPtpClockAccuracy TmnxPtpClockAccuracy,
tmnxPtpClockVariance TmnxPtpClockVariance,
tmnxPtpClockPortState TmnxPtpPortState,
tmnxPtpClockPortStateLastChanged TimeStamp,
tmnxPtpClockRecoveryState INTEGER,
tmnxPtpClockRecoveryStateLastChg TimeStamp,
tmnxPtpClockFrequencyOffset Integer32
}
tmnxPtpClockIdentity OBJECT-TYPE
SYNTAX TmnxPtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockIdentity indicates the identify of the local
Clock. This object corresponds to the value of the
defaultDS.clockIdentity data set member defined by IEEE Std 1588-2008.
The clock identity is derived from tmnxChassisBaseMacAddress."
::= { tmnxPtpClockOperEntry 1 }
tmnxPtpClockOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockOperState indicates the operational state of
PTP 1588 on the system."
::= { tmnxPtpClockOperEntry 2 }
tmnxPtpClockStepType OBJECT-TYPE
SYNTAX TmnxPtpClockStepType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockStepType indicates how the system provides
timing information. SROS systems always have a tmnxPtpClockStepType of
'oneStep (1)', and never transmit PTP 'follow up' packets."
::= { tmnxPtpClockOperEntry 3 }
tmnxPtpClockClass OBJECT-TYPE
SYNTAX TmnxPtpClockClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockClass indicates the local clock class. The
value of this object corresponds to the defaultDS.clockQuality data
set member defined in IEEE Std 1588-2008.
When tmnxPtpClockClockType is 'ordinarySlave (1)', tmnxPtpClockClass
is 'slaveOnly (255)'. Otherwise, when tmnxPtpClockProfile is
'ieee1588-2008 (2)' tmnxPtpClockClass is 'default (248)'. When
tmnxPtpClockProfile is 'g8265dot1-2010 (1)', tmnxPtpClockClass changes
depending on the value of tmnxSyncIfTimingSystemQltyLevel.
The mapping between ITU-T synchronization quality levels and PTP clock
class is given in ITU-T recommendation G.8265.1."
REFERENCE
"IEEE Std 1588-2008, Section 8.2.1.3.1.1 and
ITU-T draft G.8265.1 V0.3, Section 6.7.3.2."
::= { tmnxPtpClockOperEntry 4 }
tmnxPtpClockAccuracy OBJECT-TYPE
SYNTAX TmnxPtpClockAccuracy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockAccuracy indicates the accuracy of the clock.
The value of this object corresponds to the
defaultDS.clockQuality.clockAccuracy data set member defined in IEEE
Std 1588-2008. For SROS systems, this is always reported as 254
(0xFE), meaning 'Unknown'."
REFERENCE
"IEEE Std 1588-2008, Section 8.2.1.3.1.2"
::= { tmnxPtpClockOperEntry 5 }
tmnxPtpClockVariance OBJECT-TYPE
SYNTAX TmnxPtpClockVariance
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockVariance indicates the inherent precision of
the local clock. The value of this object corresponds to the
defaultDS.clockQuality.clockVariance data set member defined in IEEE
Std 1588-2008."
::= { tmnxPtpClockOperEntry 6 }
tmnxPtpClockPortState OBJECT-TYPE
SYNTAX TmnxPtpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockPortState indicates the current state of the
single PTP port when tmnxPtpClockClockType is either
'ordinarySlave (1)' or 'ordinaryMaster (2)'. Otherwise,
tmnxPtpClockPortState is 'notApplicable (0)'.
The value of this object corresponds to the portDS.portState data set
member defined in IEEE Std 1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 9.2.5"
::= { tmnxPtpClockOperEntry 7 }
tmnxPtpClockPortStateLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockPortStateLastChanged indicates the time,
since system startup, when the tmnxPtpClockPortState last changed
state."
::= { tmnxPtpClockOperEntry 8 }
tmnxPtpClockRecoveryState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
initial (1),
acquiring (2),
phaseTracking (3),
holdover (4),
locked (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecoveryState indicates the state of the clock
recovery process on a PTP system. The various states are:
notApplicable (0) - The system is not attempting to recover a clock
initial (1) - The system is configured to recover a clock,
but not enough information has yet been received
to adjust the local clock to match a master
clock
acquiring (2) - The system has enough information to attempt
clock recovery, and has started the process of
adjusting its local clock frequency to match the
master clock
phaseTracking (3) - The system has adjusted its local clock to the
approximate frequency of the master clock, and
is adjusting the local clock to minimize the
phase difference between the two clocks
holdover (4) - The system has stopped receiving useful
information from the chosen master clock, and is
maintaining the last estimated frequency for its
local clock
locked (5) - The system is locked to the chosen master clock
and the phase error between the master clock and
the local clock is relatively small"
::= { tmnxPtpClockOperEntry 9 }
tmnxPtpClockRecoveryStateLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecoveryStateLastChg indicates the time,
since system startup, when tmnxPtpClockRecoveryState last changed
state."
::= { tmnxPtpClockOperEntry 10 }
tmnxPtpClockFrequencyOffset OBJECT-TYPE
SYNTAX Integer32
UNITS "parts per trillion"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockFrequencyOffset indicates the frequency offset
of the recovered clock, from the nominal clock rate, in parts per
trillion. Positive values indicate that the recovered clock is faster
than nominal, and negative values indicate that the recovered clock is
slower than nominal."
REFERENCE
"IEEE Std 1588-2008 Section 3.1.12"
::= { tmnxPtpClockOperEntry 11 }
tmnxPtpMasterClockOper OBJECT IDENTIFIER ::= { tmnxPtp1588Status 2 }
tmnxPtpMasterClockAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockAddressType indicates, along with the
value of tmnxPtpMasterClockAddress, the IP address of the Parent
Clock.
This object is only valid when tmnxPtpMasterClockTransportType is
'udpIp (2)'."
REFERENCE
"IEEE 1588-2008, Annex D"
::= { tmnxPtpMasterClockOper 1 }
tmnxPtpMasterClockAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockAddress indicates, along with the value
of tmnxPtpMasterClockAddressType, the IP address of the Parent Clock.
This object is only valid when tmnxPtpMasterClockTransportType is
'udpIp (2)'."
REFERENCE
"IEEE 1588-2008, Annex D"
::= { tmnxPtpMasterClockOper 2 }
tmnxPtpMasterClockGMClockId OBJECT-TYPE
SYNTAX TmnxPtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockGMClockId indicates the Grand Master
Clock Identity for the Master Clock.
This corresponds to the parentDS.grandmasterIdentity data set member
defined in IEEE Std 1588-2008."
REFERENCE
"IEEE 1588-2008, Section 8.2.3.6"
::= { tmnxPtpMasterClockOper 3 }
tmnxPtpMasterClockGMClockPrio1 OBJECT-TYPE
SYNTAX TmnxPtpPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockGMClockPrio1 indicates the priority1
set by the Grandmaster clock. The value of this object corresponds to
the parentDS.grandmasterPriority1 data set member defined in IEEE Std
1588-2008."
REFERENCE
"IEEE 1588-2008, Section 8.2.3.8"
::= { tmnxPtpMasterClockOper 4 }
tmnxPtpMasterClockGMClockPrio2 OBJECT-TYPE
SYNTAX TmnxPtpPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockGMClockPrio2 indicates the priority2
set by the Grandmaster clock. The value of this object corresponds to
the parentDS.grandmasterPriority2 data set member defined in IEEE Std
1588-2008."
REFERENCE
"IEEE 1588-2008, Section 8.2.3.9"
::= { tmnxPtpMasterClockOper 5 }
tmnxPtpMasterClockGMClockClass OBJECT-TYPE
SYNTAX TmnxPtpClockClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockGMClockClass indicates the grand master
clock class. The value of this object corresponds to the
parentDS.grandMasterClockQuality.clockClass data set member defined in
IEEE Std 1588-2008."
REFERENCE
"IEEE 1588-2008, Section 8.2.3.7"
::= { tmnxPtpMasterClockOper 6 }
tmnxPtpMasterClockGMAccuracy OBJECT-TYPE
SYNTAX TmnxPtpClockAccuracy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockGMAccuracy indicates the accuracy of
the Grand Master clock. The value of this object corresponds to the
parentDS.grandMasterClockQuality.clockAccuracy data set member defined
in IEEE Std 1588-2008."
REFERENCE
"IEEE 1588-2008, Section 8.2.3.7"
::= { tmnxPtpMasterClockOper 7 }
tmnxPtpMasterClockGMVariance OBJECT-TYPE
SYNTAX TmnxPtpClockVariance
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockGMVariance indicates the variance of
the Grand Master clock time. The value of this object corresponds to
the parentDS.grandMasterClockQuality.offsetScaledLogVariance data set
member defined in IEEE Std 1588-2008."
REFERENCE
"IEEE 1588-2008, Section 8.2.3.7"
::= { tmnxPtpMasterClockOper 8 }
tmnxPtpMasterClockParentClockId OBJECT-TYPE
SYNTAX TmnxPtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockParentClockId indicates the clock
identity of the Master Clock's Parent. The value of this object
corresponds to the parentDS.parentPortIdentity.clockIdentity data set
member defined in IEEE Std 1588-2008."
REFERENCE
"IEEE 1588-2008, Section 8.2.3.2"
::= { tmnxPtpMasterClockOper 9 }
tmnxPtpMasterClockParentPortNum OBJECT-TYPE
SYNTAX TmnxPtpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockParentPortNum indicates the identifying
port number used by the remote peer when communicating with the local
clock. The value of this object corresponds to the
parentDS.parentPortIdentity.portNumber data set member defined in
IEEE Std 1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 8.2.3.2"
::= { tmnxPtpMasterClockOper 10 }
tmnxPtpMasterClockTransportType OBJECT-TYPE
SYNTAX TmnxPtpTransportType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockTransportType indicates the transport
type of the PTP packets exchanged between the local clock and the
parent clock.
If the local clock has not chosen another PTP clock as its parent
clock, tmnxPtpMasterClockTransportType has a value of 'none (1)'"
::= { tmnxPtpMasterClockOper 11 }
tmnxPtpMasterClockEthernetPort OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockEthernetPort indicates the Ethernet
port of the parent clock. This object is only valid when
tmnxPtpMasterClockTransportType is 'ethernet (3)'."
REFERENCE
"IEEE Std 1588-2008, Annex F"
::= { tmnxPtpMasterClockOper 12 }
tmnxPtpMasterClockMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockMacAddress indicates the Ethernet MAC
address of the parent clock. This object is only valid when
tmnxPtpMasterClockTransportType is 'ethernet (3)'."
REFERENCE
"IEEE Std 1588-2008, Annex F"
::= { tmnxPtpMasterClockOper 13 }
tmnxPtpPeerMasterStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPeerMasterStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerMasterStatusTable consists of Precision Time Protocol
Master Peer state information. This table extends the
tmnxPtpPeerConfigTable for peers configured as grandmaster or boundary
PTP clocks that may provide timing information to the local clock."
::= { tmnxPtp1588Status 3 }
tmnxPtpPeerMasterStatusEntry OBJECT-TYPE
SYNTAX TmnxPtpPeerMasterStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerMasterStatusEntry contains the information pertaining
to Precision Time Protocol peers configured as master clocks.
Rows in this table are created and destroyed by the system based on
the configuration in the associated tmnxPtpPeerConfigEntry. All
peers in this table have tmnxPtpPeerRemoteMaster set to 'true'."
INDEX {
vRtrID,
tmnxPtpPeerIpAddrType,
tmnxPtpPeerIpAddress
}
::= { tmnxPtpPeerMasterStatusTable 1 }
TmnxPtpPeerMasterStatusEntry ::= SEQUENCE
{
tmnxPtpPeerMasterCurrentMaster TruthValue,
tmnxPtpPeerMasterClockStepType TmnxPtpClockStepType,
tmnxPtpPeerMasterClockStepsRemvd Unsigned32,
tmnxPtpPeerMasterGMClockId TmnxPtpClockIdentity,
tmnxPtpPeerMasterGMClockPrio1 TmnxPtpPriority,
tmnxPtpPeerMasterGMClockPrio2 TmnxPtpPriority,
tmnxPtpPeerMasterGMClockClass TmnxPtpClockClass,
tmnxPtpPeerMasterGMClockAccuracy TmnxPtpClockAccuracy,
tmnxPtpPeerMasterGMClockVariance TmnxPtpClockVariance,
tmnxPtpPeerMasterAlarm BITS
}
tmnxPtpPeerMasterCurrentMaster OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterCurrentMaster indicates whether or not
this PTP Peer has been chosen by the PTP Best Master Clock Algorithm
as the current parent clock."
::= { tmnxPtpPeerMasterStatusEntry 1 }
tmnxPtpPeerMasterClockStepType OBJECT-TYPE
SYNTAX TmnxPtpClockStepType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterClockStepType indicates the step type of
the PTP peer."
::= { tmnxPtpPeerMasterStatusEntry 2 }
tmnxPtpPeerMasterClockStepsRemvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterClockStepsRemvd indicates the number of
steps the master is removed from the grandmaster clock. This value is
taken from the last announce packet received from the peer clock."
REFERENCE
"IEEE Std 1588-2008 Section 13.5.2.7"
::= { tmnxPtpPeerMasterStatusEntry 3 }
tmnxPtpPeerMasterGMClockId OBJECT-TYPE
SYNTAX TmnxPtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterGMClockId indicates the identity of the
grandmaster PTP clock. This value is taken from the last Announce
packet received from the peer clock."
::= { tmnxPtpPeerMasterStatusEntry 4 }
tmnxPtpPeerMasterGMClockPrio1 OBJECT-TYPE
SYNTAX TmnxPtpPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterGMClockPrio1 indicates the 'priority1'
value of the grandmaster clock. This value is taken from the last
announce packet received from the peer clock."
::= { tmnxPtpPeerMasterStatusEntry 5 }
tmnxPtpPeerMasterGMClockPrio2 OBJECT-TYPE
SYNTAX TmnxPtpPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterGMClockPrio2 indicates the 'priority2'
value of the grandmaster clock. This value is taken from the last
announce packet received from the peer clock."
::= { tmnxPtpPeerMasterStatusEntry 6 }
tmnxPtpPeerMasterGMClockClass OBJECT-TYPE
SYNTAX TmnxPtpClockClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterGMClockClass indicates the clock class
of the grandmaster clock. This value is taken from the last announce
packet received from the peer clock."
::= { tmnxPtpPeerMasterStatusEntry 7 }
tmnxPtpPeerMasterGMClockAccuracy OBJECT-TYPE
SYNTAX TmnxPtpClockAccuracy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterGMClockAccuracy indicates the clock
accuracy of the grandmaster clock. This value is taken from the last
announce packet received from the peer clock."
::= { tmnxPtpPeerMasterStatusEntry 8 }
tmnxPtpPeerMasterGMClockVariance OBJECT-TYPE
SYNTAX TmnxPtpClockVariance
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterGMClockVariance indicates the clock
variance of the grandmaster clock. This value is taken from the last
announce packet received from the peer clock."
::= { tmnxPtpPeerMasterStatusEntry 9 }
tmnxPtpPeerMasterAlarm OBJECT-TYPE
SYNTAX BITS {
ptsfLossAnnounce (0),
ptsfLossSync (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerMasterAlarm indicates the alarm status of the
PTP peer clock:
ptsfLossAnnounce(0)
The peer is in the 'Packet Timing Signal Fail (Loss Announce)'
state, indicating that it is not receiving PTP announce messages
from the remote master.
The ptsfLossAnnounce bit is set if no PTP announce messages are
received for a duration equal to ANNOUNCE_RECEIPT_TIMEOUT
seconds, as described in G.8251.1, section 6.7.3.3.
The ptsfLossAnnounce bit is cleared if a PTP announce message is
received from the remote master.
ptsfLossSync(1)
The peer is in the 'Packet Timing Signal Fail (Loss Sync)'
state, indicating that it is not receiving PTP timing messages
from the remote master.
The ptsfLossSync bit is set if no PTP timing messages are
received from the remote master for a specific duration. The
duration to enter the ptsfLossSync state is the same as the
duration for the ptsfLossAnnounce state.
The ptsfLossSync bit is cleared when PTP timing messages are
received from the remote master.
These bits will only be set when tmnxPtpClockClockType is
'ordinarySlave (1)'. They do not apply when tmnxPtpClockClockType is
'ordinaryMaster (2)' or 'boundary (3)'."
REFERENCE
"ITU-T G.8265.1, section 6.7.3.3."
::= { tmnxPtpPeerMasterStatusEntry 11 }
tmnxPtpPeerUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPeerUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerUnicastTable consists of the status of unicast
messaging service between the local PTP clock and all other PTP
clocks."
::= { tmnxPtp1588Status 4 }
tmnxPtpPeerUnicastEntry OBJECT-TYPE
SYNTAX TmnxPtpPeerUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerUnicastEntry contains the status of unicast messaging
service between PTP clocks for the specified packet type in the
direction specified.
Rows in this table are created and destroyed by the system based on
the existence of rows in the tmnxPtpPeerConfigTable, and based on the
transfer of unicast negotiation signaling TLVs between the PTP clocks."
REFERENCE
"IEEE Std 1588-2008 Section 16.1."
INDEX {
vRtrID,
tmnxPtpPeerIpAddrType,
tmnxPtpPeerIpAddress,
tmnxPtpPeerUnicastDirection,
tmnxPtpPeerUnicastPktType
}
::= { tmnxPtpPeerUnicastTable 1 }
TmnxPtpPeerUnicastEntry ::= SEQUENCE
{
tmnxPtpPeerUnicastDirection TmnxPtpDirection,
tmnxPtpPeerUnicastPktType INTEGER,
tmnxPtpPeerUnicastStatus INTEGER,
tmnxPtpPeerUnicastRate TmnxPtpLogInterval,
tmnxPtpPeerUnicastDuration Unsigned32,
tmnxPtpPeerUnicastEventTime TimeStamp
}
tmnxPtpPeerUnicastDirection OBJECT-TYPE
SYNTAX TmnxPtpDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerUnicastDirection specifies the direction
of packet flow for tmnxPtpPeerUnicastPktType packets (announce,
sync, or delay response). Ordinary slave clocks will only have
entries in tmnxPtpPeerUnicastTable with a tmnxPtpPeerUnicastDirection
of 'rx (1)'. Ordinary master clocks will only have entries with a
tmnxPtpPeerUnicastDirection of 'tx (2)'. Boundary clocks may have
entries in both directions."
::= { tmnxPtpPeerUnicastEntry 1 }
tmnxPtpPeerUnicastPktType OBJECT-TYPE
SYNTAX INTEGER {
announce (1),
sync (2),
delayResponse (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerUnicastPktType specifies the packet type
described by the values in this table entry."
::= { tmnxPtpPeerUnicastEntry 2 }
tmnxPtpPeerUnicastStatus OBJECT-TYPE
SYNTAX INTEGER {
pending (1),
granted (2),
denied (3),
expired (4),
canceled (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerUnicastStatus indicates:
pending (1) - a request for unicast transmission has been sent to
the master, but no reply has been received.
granted (2) - the packet rate and duration has been accepted by
the master clock
denied (3) - the packet rate and/or duration has been denied by
the master clock
expired (4) - the unicast transmission duration has expired
without being renewed
canceled (5) - unicast transmission has been canceled by either
the local or remote clock"
::= { tmnxPtpPeerUnicastEntry 3 }
tmnxPtpPeerUnicastRate OBJECT-TYPE
SYNTAX TmnxPtpLogInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerUnicastRate indicates the packet rate
requested or granted for unicast transmission between the PTP peers."
::= { tmnxPtpPeerUnicastEntry 4 }
tmnxPtpPeerUnicastDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerUnicastDuration indicates the duration, in
seconds, requested or granted for unicast transmission between the PTP
peers."
::= { tmnxPtpPeerUnicastEntry 5 }
tmnxPtpPeerUnicastEventTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerUnicastEventTime indicates the time, since
system startup, that tmnxPtpPeerUnicastStatus last changed or the
unicast session between the PTP clocks was renewed."
::= { tmnxPtpPeerUnicastEntry 6 }
tmnxPtpTimeInformation OBJECT IDENTIFIER ::= { tmnxPtp1588Status 5 }
tmnxPtpTimeInfoTimescale OBJECT-TYPE
SYNTAX INTEGER {
ptp (1),
arbitrary (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpTimeInfoTimescale indicates the time scale of the
time reported by PTP."
REFERENCE
"IEEE 1588-2008, sections 7.2 and 8.2.4.8."
::= { tmnxPtpTimeInformation 1 }
tmnxPtpTimeInfoCurrentTime OBJECT-TYPE
SYNTAX DateAndTime (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpTimeInfoCurrentTime contains the date and time. If
tmnxPtpTimeInfoTimescale is 'ptp (1)', the time is converted to UTC
time, based on the current offset between UTC and PTP time."
REFERENCE
"IEEE 1588-2008, sections 7.2 and 8.2.4.8."
::= { tmnxPtpTimeInformation 2 }
tmnxPtpTimeInfoFreqTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpTimeInfoFreqTraceable indicates whether the
frequency of time is traceable to a primary reference. This
corresponds to the 'frequencyTraceable' member of the 'time properties'
data set."
REFERENCE
"IEEE 1588-2008, section 8.2.4.7."
::= { tmnxPtpTimeInformation 3 }
tmnxPtpTimeInfoTimeTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpTimeInfoTimeTraceable indicates whether the
time is traceable to a primary reference. This corresponds to the
'timeTraceable' member of the 'time properties' data set."
REFERENCE
"IEEE 1588-2008, section 8.2.4.6."
::= { tmnxPtpTimeInformation 4 }
tmnxPtpTimeInfoTimeSource OBJECT-TYPE
SYNTAX INTEGER {
atomicClock (16),
gps (32),
terrestrialRadio (48),
ptp (64),
ntp (80),
handSet (96),
other (144),
internalOscillator (160),
reserved (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpTimeInfoTimeSource indicates the source of time
used by the grandmaster clock. This corresponds to the 'timeSource'
member of the 'time properties' data set."
REFERENCE
"IEEE 1588-2008, sections 7.6.2.6 and 8.2.4.9."
::= { tmnxPtpTimeInformation 5 }
tmnxPtpPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPortStatusTable consists of PTP status information that is
specific to Ethernet ports configured for direct transport of PTP over
Ethernet, as described in IEEE 1588-2008, Annex F."
REFERENCE
"IEEE Std 1588-2008 Annex F"
::= { tmnxPtp1588Status 6 }
tmnxPtpPortStatusEntry OBJECT-TYPE
SYNTAX TmnxPtpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A tmnxPtpPortStatusEntry contains status information pertaining to PTP
on a specific Ethernet port. Entries are created and deleted
when entries in the tmnxPtpPortTable are created and deleted."
AUGMENTS { tmnxPtpPortEntry }
::= { tmnxPtpPortStatusTable 1 }
TmnxPtpPortStatusEntry ::= SEQUENCE
{
tmnxPtpPortLocalPortNumber TmnxPtpPortNumber,
tmnxPtpPortOperState TmnxOperState,
tmnxPtpPortState TmnxPtpPortState,
tmnxPtpPortTimeStampRefPoint TmnxPtpTimeStampReferencePoint,
tmnxPtpPortNeighbors Unsigned32,
tmnxPtpPortTxPacketRate Unsigned32,
tmnxPtpPortRxPacketRate Unsigned32,
tmnxPtpPortSrcMacAddr MacAddress
}
tmnxPtpPortLocalPortNumber OBJECT-TYPE
SYNTAX TmnxPtpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortLocalPortNumber indicates the PTP port number
assigned by the local clock and used when communicating directly over
the Ethernet physical port corresponding to this table row.
If tmnxPtpClockClockType is either 'ordinarySlave (1)' or
'ordinaryMaster (2)', tmnxPtpPortLocalPortNumber has a value of 1.
The value of this object corresponds to the
portDS.portIdentity.portNumber data set member defined in IEEE Std
1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 7.5.2"
::= { tmnxPtpPortStatusEntry 1 }
tmnxPtpPortOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortOperState indicates the operational state of
PTP on the Ethernet port.
The operational state will only be 'inService (2)' if PTP is
administratively enabled on the port, if PTP is globally operational
on the system, and if the Ethernet port is operationally up. In other
words, tmnxPtpPortAdminState, tmnxPtpClockOperState, and
tmnxPortOperStatus are all 'inService (2)'."
::= { tmnxPtpPortStatusEntry 2 }
tmnxPtpPortState OBJECT-TYPE
SYNTAX TmnxPtpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortState indicates the current state of the PTP
port.
If tmnxPtpClockClockType is either 'ordinarySlave (1)' or
'ordinaryMaster (2)', the value of tmnxPtpPortState is the same as
tmnxPtpClockPortState.
The value of this object corresponds to the portDS.portState data set
member defined in IEEE Std 1588-2008."
REFERENCE
"IEEE Std 1588-2008 Section 8.2.5.3.1"
::= { tmnxPtpPortStatusEntry 3 }
tmnxPtpPortTimeStampRefPoint OBJECT-TYPE
SYNTAX TmnxPtpTimeStampReferencePoint
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortTimeStampRefPoint indicates the reference point
used to generate PTP timestamps for transmitted and received PTP event
packets on the port. If the port is capable of timestamping PTP
packets at the port, and the MDA is configured for synchronous Ethernet
operation, the value will be 'port(1)'. Otherwise, the value will be
'cpm(2)'."
::= { tmnxPtpPortStatusEntry 4 }
tmnxPtpPortNeighbors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortNeighbors indicates the numbers of neighboring
PTP clocks visible to the local clock on the Ethernet port."
::= { tmnxPtpPortStatusEntry 5 }
tmnxPtpPortTxPacketRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortTxPacketRate indicates the current rate of PTP
packets that the local PTP clock is transmitting on the Ethernet port.
This packet rate includes all PTP packets transmitted by the local
clock, which may include announce, sync, delay request, and delay
response PTP packets.
This value is periodically updated by the local clock."
::= { tmnxPtpPortStatusEntry 6 }
tmnxPtpPortRxPacketRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortRxPacketRate indicates the current rate of PTP
packets received by the local PTP clock on the Ethernet port.
This packet rate includes all PTP packets received on the port. These
packets may originate from multiple PTP clocks. Since Ethernet packets
are transmitted using a multicast destination MAC address, the local
clock will receive all PTP packets on the Ethernet segment, including
packets that are not intended to be handled by the local clock.
This value is periodically updated by the local clock."
::= { tmnxPtpPortStatusEntry 7 }
tmnxPtpPortSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortSrcMacAddr is the MAC address of the PTP port
that is used as source MAC address of the Ethernet frames carrying
L2-PTP messages, transmitted through associated physical port.
This is typically the MAC address of the physical port associated with
the PTP port, but for some cases it may be an alternate MAC address
taken from the pool of addresses allocated to the host system.
This value is updated by the local clock."
::= { tmnxPtpPortStatusEntry 8 }
tmnxPtpPortNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPortNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPortNeighborTable contains information on the neighbor PTP
clocks communicating using direct transport of PTP over Ethernet and
visible to the local PTP clock.
Table entries are created automatically by the system upon reception of
PTP Ethernet multicast packets from neighboring PTP clocks. Individual
table entries are deleted automatically by the system if no PTP packets
are received from the neighbor clock for a period of time."
::= { tmnxPtp1588Status 7 }
tmnxPtpPortNeighborEntry OBJECT-TYPE
SYNTAX TmnxPtpPortNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A tmnxPtpPortNeighborEntry contains information about an individual
PTP clock visible to the local PTP clock."
INDEX {
tmnxChassisIndex,
tmnxPortPortID,
tmnxPtpPortNeighborMacAddress
}
::= { tmnxPtpPortNeighborTable 1 }
TmnxPtpPortNeighborEntry ::= SEQUENCE
{
tmnxPtpPortNeighborMacAddress MacAddress,
tmnxPtpPortNeighborClockId TmnxPtpClockIdentity,
tmnxPtpPortNeighborPtpPortNumber TmnxPtpPortNumber,
tmnxPtpPortNeighborRxPacketRate Unsigned32
}
tmnxPtpPortNeighborMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPortNeighborMacAddress indicates the MAC address
of the neighboring PTP clock."
::= { tmnxPtpPortNeighborEntry 1 }
tmnxPtpPortNeighborClockId OBJECT-TYPE
SYNTAX TmnxPtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortNeighborClockId indicates the PTP clock
identity of the neighboring PTP clock."
::= { tmnxPtpPortNeighborEntry 2 }
tmnxPtpPortNeighborPtpPortNumber OBJECT-TYPE
SYNTAX TmnxPtpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortNeighborPtpPortNumber indicates the PTP port
number of the PTP port on the neighbor clock that is connected to the
local clock on this Ethernet port."
::= { tmnxPtpPortNeighborEntry 3 }
tmnxPtpPortNeighborRxPacketRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortNeighborRxPacketRate indicates the current
rate of PTP packets received by the local clock from the neighboring
PTP clock."
::= { tmnxPtpPortNeighborEntry 4 }
tmnxPtp1588Statistics OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 5 }
tmnxPtpClockPacketStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpClockPacketStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpClockPacketStatsTable consists of the packet statistics
associated with the Precision Time Protocol (PTP)."
::= { tmnxPtp1588Statistics 1 }
tmnxPtpClockPacketStatsEntry OBJECT-TYPE
SYNTAX TmnxPtpClockPacketStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpClockPacketStatsEntry contain the directional packet
statistics for the Precision Time Protocol (PTP).
Rows are created and destroyed by the system."
INDEX { tmnxPtpClkPktStatsDirection }
::= { tmnxPtpClockPacketStatsTable 1 }
TmnxPtpClockPacketStatsEntry ::= SEQUENCE
{
tmnxPtpClkPktStatsDirection TmnxPtpDirection,
tmnxPtpClkPktStatsAnnounce Counter32,
tmnxPtpClkPktStatsSync Counter32,
tmnxPtpClkPktStatsFollowUp Counter32,
tmnxPtpClkPktStatsDelayRequest Counter32,
tmnxPtpClkPktStatsDelayResp Counter32,
tmnxPtpClkPktStatsSignaling Counter32,
tmnxPtpClkPktStatsOther Counter32,
tmnxPtpClkPktStatsUniReqAnno Counter32,
tmnxPtpClkPktStatsUniReqSync Counter32,
tmnxPtpClkPktStatsUniReqDelayRsp Counter32,
tmnxPtpClkPktStatsUniGrantAnno Counter32,
tmnxPtpClkPktStatsUniGrantSync Counter32,
tmnxPtpClkPktStatsUniGrantDelRsp Counter32,
tmnxPtpClkPktStatsUniDenyAnno Counter32,
tmnxPtpClkPktStatsUniDenySync Counter32,
tmnxPtpClkPktStatsUniDenyDelRsp Counter32,
tmnxPtpClkPktStatsUniCancelAnno Counter32,
tmnxPtpClkPktStatsUniCancelSync Counter32,
tmnxPtpClkPktStatsUniCancelDelay Counter32,
tmnxPtpClkPktStatsUniAckCnclAnno Counter32,
tmnxPtpClkPktStatsUniAckCnclSync Counter32,
tmnxPtpClkPktStatsUniAckCnclDly Counter32,
tmnxPtpClkPktStatsOtherTLVs Counter32,
tmnxPtpClkPktStatsDropBadDomain Counter32,
tmnxPtpClkPktStatsDropAltMaster Counter32,
tmnxPtpClkPktStatsDropOther Counter32,
tmnxPtpClkPktStatsTimeStampPort Counter32,
tmnxPtpClkPktStatsTimeStampCpm Counter32,
tmnxPtpClkPktStatsDropOutOfSeq Counter32,
tmnxPtpClkPktStatsDropPeerShut Counter32
}
tmnxPtpClkPktStatsDirection OBJECT-TYPE
SYNTAX TmnxPtpDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDirection specifies which direction the
packet statistics for the particular row are accumulated."
::= { tmnxPtpClockPacketStatsEntry 1 }
tmnxPtpClkPktStatsAnnounce OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsAnnounce indicates the accumulated
packet statistics for PTP Announce messages."
::= { tmnxPtpClockPacketStatsEntry 2 }
tmnxPtpClkPktStatsSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsSync indicates the accumulated packet
statistics for PTP Sync messages."
::= { tmnxPtpClockPacketStatsEntry 3 }
tmnxPtpClkPktStatsFollowUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsFollowUp indicates the accumulated
packet statistics for PTP Follow Up messages."
::= { tmnxPtpClockPacketStatsEntry 4 }
tmnxPtpClkPktStatsDelayRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDelayRequest indicates the accumulated
packet statistics for PTP Delay Request messages."
::= { tmnxPtpClockPacketStatsEntry 5 }
tmnxPtpClkPktStatsDelayResp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDelayResp indicates the accumulated
packet statistics for PTP Delay Response messages."
::= { tmnxPtpClockPacketStatsEntry 6 }
tmnxPtpClkPktStatsSignaling OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsSignaling indicates the accumulated
packet statistics for PTP signaling messages."
::= { tmnxPtpClockPacketStatsEntry 7 }
tmnxPtpClkPktStatsOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsOther indicates the accumulated packet
statistics for all other PTP messages.
This object is accumulated in the 'rx' direction only."
::= { tmnxPtpClockPacketStatsEntry 8 }
tmnxPtpClkPktStatsUniReqAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniReqAnno indicates the accumulated
packet statistics for Unicast Request Announce TLVs."
::= { tmnxPtpClockPacketStatsEntry 9 }
tmnxPtpClkPktStatsUniReqSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniReqSync indicates the accumulated
packet statistics for Unicast Request Sync TLVs."
::= { tmnxPtpClockPacketStatsEntry 10 }
tmnxPtpClkPktStatsUniReqDelayRsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniReqDelayRsp indicates the
accumulated packet statistics for Unicast Request Delay Response TLVs."
::= { tmnxPtpClockPacketStatsEntry 11 }
tmnxPtpClkPktStatsUniGrantAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniGrantAnno indicates the accumulated
packet statistics for Unicast Grant Announce TLVs, where the request
was granted. The request was granted if the duration indicated in the
TLV was non-zero."
::= { tmnxPtpClockPacketStatsEntry 12 }
tmnxPtpClkPktStatsUniGrantSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniGrantSync indicates the accumulated
packet statistics for Unicast Grant Sync TLVs, where the request was
granted. The request was granted if the duration indicated in the TLV
was non-zero."
::= { tmnxPtpClockPacketStatsEntry 13 }
tmnxPtpClkPktStatsUniGrantDelRsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniGrantDelRsp indicates the accumulated
packet statistics for Unicast Grant Delay Response TLVs, where the
request was granted. The request was granted if the duration indicated
in the TLV was non-zero."
::= { tmnxPtpClockPacketStatsEntry 14 }
tmnxPtpClkPktStatsUniDenyAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniDenyAnno indicates the accumulated
packet statistics for Unicast Grant Announce TLVs, where the request
was denied. The request was denied if the duration indicated in the
TLV was zero."
::= { tmnxPtpClockPacketStatsEntry 15 }
tmnxPtpClkPktStatsUniDenySync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniDenySync indicates the accumulated
packet statistics for Unicast Grant Sync TLVs, where the request was
denied. The request was denied if the duration indicated in the TLV
was zero."
::= { tmnxPtpClockPacketStatsEntry 16 }
tmnxPtpClkPktStatsUniDenyDelRsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniDenyDelRsp indicates the accumulated
packet statistics for Unicast Grant Delay Response TLVs, where the
request was denied. The request was denied if the duration indicated
in the TLV was zero."
::= { tmnxPtpClockPacketStatsEntry 17 }
tmnxPtpClkPktStatsUniCancelAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniCancelAnno indicates the accumulated
packet statistics for Unicast Cancel Announce TLVs."
::= { tmnxPtpClockPacketStatsEntry 18 }
tmnxPtpClkPktStatsUniCancelSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniCancelSync indicates the accumulated
packet statistics for Unicast Cancel Sync TLVs."
::= { tmnxPtpClockPacketStatsEntry 19 }
tmnxPtpClkPktStatsUniCancelDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniCancelDelay indicates the
accumulated packet statistics for Unicast Cancel Delay TLVs."
::= { tmnxPtpClockPacketStatsEntry 20 }
tmnxPtpClkPktStatsUniAckCnclAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniAckCnclAnno indicates the
accumulated packet statistics for Unicast Acknowledge Cancel Announce
TLVs."
::= { tmnxPtpClockPacketStatsEntry 21 }
tmnxPtpClkPktStatsUniAckCnclSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniAckCnclSync indicates the
accumulated packet statistics for Unicast Acknowledge Cancel Sync
TLVs."
::= { tmnxPtpClockPacketStatsEntry 22 }
tmnxPtpClkPktStatsUniAckCnclDly OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsUniAckCnclDly indicates the accumulated
packet statistics for Unicast Acknowledge Cancel Delay Response TLVs."
::= { tmnxPtpClockPacketStatsEntry 23 }
tmnxPtpClkPktStatsOtherTLVs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsOtherTLVs indicates the accumulated
packet statistics for other PTP TLV signaling messages.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpClockPacketStatsEntry 24 }
tmnxPtpClkPktStatsDropBadDomain OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDropBadDomain indicates the accumulated
packet statistics for PTP packets dropped because the PTP domain
indicated in the packet does not match the configured PTP domain.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpClockPacketStatsEntry 25 }
tmnxPtpClkPktStatsDropAltMaster OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDropAltMaster indicates the accumulated
packet statistics for PTP packets dropped because the PTP header has
the 'alternateMasterFlag' set.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpClockPacketStatsEntry 26 }
tmnxPtpClkPktStatsDropOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDropOther indicates the accumulated
packet statistics for PTP packets dropped and not counted in the
'tmnxPtpClkPktStatsDropBadDomain', 'tmnxPtpClkPktStatsDropAltMaster',
'tmnxPtpClkPktStatsDropOutOfSeq', and 'tmnxPtpClkPktStatsDropPeerShut'
objects.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpClockPacketStatsEntry 27 }
tmnxPtpClkPktStatsTimeStampPort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsTimeStampPort indicates the accumulated
packet statistics for PTP event packets where the timestamp point is
at the physical layer."
REFERENCE
"IEEE 1588-2008, Figure 14, timestamp point 'A'."
::= { tmnxPtpClockPacketStatsEntry 28 }
tmnxPtpClkPktStatsTimeStampCpm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsTimeStampCpm indicates the accumulated
packet statistics for PTP event packets where the timestamp point is
at the operating system kernel."
REFERENCE
"IEEE 1588-2008, Figure 14, timestamp point 'B'."
::= { tmnxPtpClockPacketStatsEntry 29 }
tmnxPtpClkPktStatsDropOutOfSeq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDropOutOfSeq indicates the accumulated
packet statistics for PTP packets dropped because the packets were
received out of sequence.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpClockPacketStatsEntry 30 }
tmnxPtpClkPktStatsDropPeerShut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClkPktStatsDropPeerShut indicates the accumulated
packet statistics for PTP packets dropped because the packets were
received from a PTP peer that has been administratively disabled.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpClockPacketStatsEntry 31 }
tmnxPtpPeerPacketStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPeerPacketStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerPacketStatsTable consists of the per peer packet
statistics associated with the Precision Time Protocol (PTP)."
::= { tmnxPtp1588Statistics 2 }
tmnxPtpPeerPacketStatsEntry OBJECT-TYPE
SYNTAX TmnxPtpPeerPacketStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPeerPacketStatsEntry contain the directional packet
statistics for the Precision Time Protocol (PTP).
Rows are created and destroyed by the system."
INDEX {
vRtrID,
tmnxPtpPeerIpAddrType,
tmnxPtpPeerIpAddress,
tmnxPtpPeerPktStatDirection
}
::= { tmnxPtpPeerPacketStatsTable 1 }
TmnxPtpPeerPacketStatsEntry ::= SEQUENCE
{
tmnxPtpPeerPktStatDirection TmnxPtpDirection,
tmnxPtpPeerPktStatAnnounce Counter32,
tmnxPtpPeerPktStatSync Counter32,
tmnxPtpPeerPktStatFollowUp Counter32,
tmnxPtpPeerPktStatDelayRequest Counter32,
tmnxPtpPeerPktStatDelayResp Counter32,
tmnxPtpPeerPktStatSignaling Counter32,
tmnxPtpPeerPktStatOther Counter32,
tmnxPtpPeerPktStatUniReqAnno Counter32,
tmnxPtpPeerPktStatUniReqSync Counter32,
tmnxPtpPeerPktStatUniReqDelayRsp Counter32,
tmnxPtpPeerPktStatUniGrantAnno Counter32,
tmnxPtpPeerPktStatUniGrantSync Counter32,
tmnxPtpPeerPktStatUniGrantDelRsp Counter32,
tmnxPtpPeerPktStatUniDenyAnno Counter32,
tmnxPtpPeerPktStatUniDenySync Counter32,
tmnxPtpPeerPktStatUniDenyDelRsp Counter32,
tmnxPtpPeerPktStatUniCancelAnno Counter32,
tmnxPtpPeerPktStatUniCancelSync Counter32,
tmnxPtpPeerPktStatUniCancelDelay Counter32,
tmnxPtpPeerPktStatUniAckCnclAnno Counter32,
tmnxPtpPeerPktStatUniAckCnclSync Counter32,
tmnxPtpPeerPktStatUniAckCnclDly Counter32,
tmnxPtpPeerPktStatOtherTLVs Counter32,
tmnxPtpPeerPktStatDropBadDomain Counter32,
tmnxPtpPeerPktStatDropAltMaster Counter32,
tmnxPtpPeerPktStatDropOther Counter32,
tmnxPtpPeerPktStatTimeStampPort Counter32,
tmnxPtpPeerPktStatTimeStampCpm Counter32,
tmnxPtpPeerPktStatDropOutOfSeq Counter32,
tmnxPtpPeerPktStatDropPeerShut Counter32
}
tmnxPtpPeerPktStatDirection OBJECT-TYPE
SYNTAX TmnxPtpDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDirection specifies which direction the
packet statistics for the particular row are accumulated."
::= { tmnxPtpPeerPacketStatsEntry 1 }
tmnxPtpPeerPktStatAnnounce OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatAnnounce indicates the accumulated
packet statistics for PTP Announce messages."
::= { tmnxPtpPeerPacketStatsEntry 2 }
tmnxPtpPeerPktStatSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatSync indicates the accumulated packet
statistics for PTP Sync messages."
::= { tmnxPtpPeerPacketStatsEntry 3 }
tmnxPtpPeerPktStatFollowUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatFollowUp indicates the accumulated
packet statistics for PTP Follow Up messages."
::= { tmnxPtpPeerPacketStatsEntry 4 }
tmnxPtpPeerPktStatDelayRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDelayRequest indicates the accumulated
packet statistics for PTP Delay Request messages."
::= { tmnxPtpPeerPacketStatsEntry 5 }
tmnxPtpPeerPktStatDelayResp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDelayResp indicates the accumulated
packet statistics for PTP Delay Response messages."
::= { tmnxPtpPeerPacketStatsEntry 6 }
tmnxPtpPeerPktStatSignaling OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatSignaling indicates the accumulated
packet statistics for PTP signaling messages."
::= { tmnxPtpPeerPacketStatsEntry 7 }
tmnxPtpPeerPktStatOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatOther indicates the accumulated packet
statistics for all other PTP messages.
This object is accumulated in the 'rx' direction only."
::= { tmnxPtpPeerPacketStatsEntry 8 }
tmnxPtpPeerPktStatUniReqAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniReqAnno indicates the accumulated
packet statistics for Unicast Request Announce TLVs."
::= { tmnxPtpPeerPacketStatsEntry 9 }
tmnxPtpPeerPktStatUniReqSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniReqSync indicates the accumulated
packet statistics for Unicast Request Sync TLVs."
::= { tmnxPtpPeerPacketStatsEntry 10 }
tmnxPtpPeerPktStatUniReqDelayRsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniReqDelayRsp indicates the
accumulated packet statistics for Unicast Request Delay Response TLVs."
::= { tmnxPtpPeerPacketStatsEntry 11 }
tmnxPtpPeerPktStatUniGrantAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniGrantAnno indicates the accumulated
packet statistics for Unicast Grant Announce TLVs, where the request
was granted. The request was granted if the duration indicated in the
TLV was non-zero."
::= { tmnxPtpPeerPacketStatsEntry 12 }
tmnxPtpPeerPktStatUniGrantSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniGrantSync indicates the accumulated
packet statistics for Unicast Grant Sync TLVs, where the request was
granted. The request was granted if the duration indicated in the TLV
was non-zero."
::= { tmnxPtpPeerPacketStatsEntry 13 }
tmnxPtpPeerPktStatUniGrantDelRsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniGrantDelRsp indicates the accumulated
packet statistics for Unicast Grant Delay Response TLVs, where the
request was granted. The request was granted if the duration indicated
in the TLV was non-zero."
::= { tmnxPtpPeerPacketStatsEntry 14 }
tmnxPtpPeerPktStatUniDenyAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniDenyAnno indicates the accumulated
packet statistics for Unicast Grant Announce TLVs, where the request
was denied. The request was denied if the duration indicated in the
TLV was zero."
::= { tmnxPtpPeerPacketStatsEntry 15 }
tmnxPtpPeerPktStatUniDenySync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniDenySync indicates the accumulated
packet statistics for Unicast Grant Sync TLVs, where the request was
denied. The request was denied if the duration indicated in the TLV
was zero."
::= { tmnxPtpPeerPacketStatsEntry 16 }
tmnxPtpPeerPktStatUniDenyDelRsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniDenyDelRsp indicates the accumulated
packet statistics for Unicast Grant Delay Response TLVs, where the
request was denied. The request was denied if the duration indicated
in the TLV was zero."
::= { tmnxPtpPeerPacketStatsEntry 17 }
tmnxPtpPeerPktStatUniCancelAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniCancelAnno indicates the accumulated
packet statistics for Unicast Cancel Announce TLVs."
::= { tmnxPtpPeerPacketStatsEntry 18 }
tmnxPtpPeerPktStatUniCancelSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniCancelSync indicates the accumulated
packet statistics for Unicast Cancel Sync TLVs."
::= { tmnxPtpPeerPacketStatsEntry 19 }
tmnxPtpPeerPktStatUniCancelDelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniCancelDelay indicates the
accumulated packet statistics for Unicast Cancel Delay TLVs."
::= { tmnxPtpPeerPacketStatsEntry 20 }
tmnxPtpPeerPktStatUniAckCnclAnno OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniAckCnclAnno indicates the
accumulated packet statistics for Unicast Acknowledge Cancel Announce
TLVs."
::= { tmnxPtpPeerPacketStatsEntry 21 }
tmnxPtpPeerPktStatUniAckCnclSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniAckCnclSync indicates the
accumulated packet statistics for Unicast Acknowledge Cancel Sync
TLVs."
::= { tmnxPtpPeerPacketStatsEntry 22 }
tmnxPtpPeerPktStatUniAckCnclDly OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatUniAckCnclDly indicates the accumulated
packet statistics for Unicast Acknowledge Cancel Delay Response TLVs."
::= { tmnxPtpPeerPacketStatsEntry 23 }
tmnxPtpPeerPktStatOtherTLVs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatOtherTLVs indicates the accumulated
packet statistics for other PTP TLV signaling messages.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPeerPacketStatsEntry 24 }
tmnxPtpPeerPktStatDropBadDomain OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDropBadDomain indicates the accumulated
packet statistics for PTP packets dropped because the PTP domain
indicated in the packet does not match the configured PTP domain.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPeerPacketStatsEntry 25 }
tmnxPtpPeerPktStatDropAltMaster OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDropAltMaster indicates the accumulated
packet statistics for PTP packets dropped because the PTP header has
the 'alternateMasterFlag' set.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPeerPacketStatsEntry 26 }
tmnxPtpPeerPktStatDropOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDropOther indicates the accumulated
packet statistics for PTP packets dropped and not counted in the
'tmnxPtpPeerPktStatDropBadDomain', 'tmnxPtpPeerPktStatDropAltMaster',
'tmnxPtpPeerPktStatDropOutOfSeq', and 'tmnxPtpPeerPktStatDropPeerShut'
objects.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPeerPacketStatsEntry 27 }
tmnxPtpPeerPktStatTimeStampPort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatTimeStampPort indicates the accumulated
packet statistics for PTP event packets where the timestamp point is
at the physical layer."
REFERENCE
"IEEE 1588-2008, Figure 14, timestamp point 'A'."
::= { tmnxPtpPeerPacketStatsEntry 28 }
tmnxPtpPeerPktStatTimeStampCpm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatTimeStampCpm indicates the accumulated
packet statistics for PTP event packets where the timestamp point is
at the operating system kernel."
REFERENCE
"IEEE 1588-2008, Figure 14, timestamp point 'B'."
::= { tmnxPtpPeerPacketStatsEntry 29 }
tmnxPtpPeerPktStatDropOutOfSeq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDropOutOfSeq indicates the accumulated
packet statistics for PTP packets dropped because the packets were
received out of sequence.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPeerPacketStatsEntry 30 }
tmnxPtpPeerPktStatDropPeerShut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPeerPktStatDropPeerShut indicates the accumulated
packet statistics for PTP packets dropped because the packets were
received from a PTP peer that has been administratively disabled.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPeerPacketStatsEntry 31 }
tmnxPtpClockRecoveryStatistics OBJECT IDENTIFIER ::= { tmnxPtp1588Statistics 3 }
tmnxPtpClockRecStatsInitial OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsInitial indicates the number of
seconds that the clock recovery system has been in the initial state."
::= { tmnxPtpClockRecoveryStatistics 1 }
tmnxPtpClockRecStatsAcquiring OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsAcquiring indicates the number of
seconds that the clock recovery system has been in the acquiring
state."
::= { tmnxPtpClockRecoveryStatistics 2 }
tmnxPtpClockRecStatsPhaseTrack OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsPhaseTrack indicates the number of
seconds that the clock recovery system has been in the phase tracking
state."
::= { tmnxPtpClockRecoveryStatistics 3 }
tmnxPtpClockRecStatsLocked OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsLocked indicates the number of
seconds that the clock recovery system has been in the locked state."
::= { tmnxPtpClockRecoveryStatistics 4 }
tmnxPtpClockRecStatsHoldover OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsHoldover indicates the number of
seconds that the clock recovery system has been in the hold-over
state."
::= { tmnxPtpClockRecoveryStatistics 5 }
tmnxPtpClockRecStatsSyncPktLoss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsSyncPktLoss indicates the number of
times that the clock recovery process detected packet loss in the sync
packet flow from the best master clock."
::= { tmnxPtpClockRecoveryStatistics 6 }
tmnxPtpClockRecStatsSyncHiPktLss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsSyncHiPktLss indicates the number of
times that the clock recovery process detected a large amount of
packet loss in the sync flow from the remote master clock. When this
event occurs, the clock recovery process restarts."
::= { tmnxPtpClockRecoveryStatistics 7 }
tmnxPtpClockRecStatsSyncStep OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsSyncStep indicates the number of
times that the clock recovery process detected a large change in the
amount of time taken for sync packets to be sent from the best master
clock. This normally occurs if the route taken by packets from the
best master changes."
::= { tmnxPtpClockRecoveryStatistics 8 }
tmnxPtpClockRecStatsSyncHighPDV OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsSyncHighPDV indicates the number of
times that the clock recovery process has determined that a sample of
sync packets from the best master clock had too much packet delay
variation to be useful in recovering the clock from the best master.
When this event occurs, the entire sample of packets is not used in
the clock recovery process."
::= { tmnxPtpClockRecoveryStatistics 9 }
tmnxPtpClockRecStatsDlyPktLoss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsDlyPktLoss indicates the number of
times that the clock recovery process detected packet loss in the
delay request/response packet flow from the best master clock."
::= { tmnxPtpClockRecoveryStatistics 10 }
tmnxPtpClockRecStatsDlyHiPktLss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsDlyHiPktLss indicates the number of
times that the clock recovery process detected a large amount of
packet loss in the delay request/response flow from the remote master
clock. When this event occurs, the clock recovery process restarts."
::= { tmnxPtpClockRecoveryStatistics 11 }
tmnxPtpClockRecStatsDlyStep OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsDlyStep indicates the number of times
that the clock recovery process detected a large change in the amount
of time taken for delay request packets to be sent to the best master
clock. This normally occurs if the route taken by packets to the best
master changes."
::= { tmnxPtpClockRecoveryStatistics 12 }
tmnxPtpClockRecStatsDlyHighPDV OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpClockRecStatsDlyHighPDV indicates the number of
times that the clock recovery process has determined that a sample of
delay request packets to the best master clock had too much packet
delay variation to be useful in recovering the clock from the best
master. When this event occurs, the entire sample of packets is not
used in the clock recovery process."
::= { tmnxPtpClockRecoveryStatistics 13 }
tmnxPtpPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPortStatsTable contains packet statistics for Ethernet
ports configured for direct transport of PTP over Ethernet."
::= { tmnxPtp1588Statistics 4 }
tmnxPtpPortStatsEntry OBJECT-TYPE
SYNTAX TmnxPtpPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPortStatsEntry contains the directional packet statistics
for a specific Ethernet port configured for direct transport of PTP
over Ethernet.
Rows are created and destroyed by the system, when corresponding
entries in the tmnxPtpPortTable are created and deleted."
INDEX {
tmnxChassisIndex,
tmnxPortPortID,
tmnxPtpPortStatDirection
}
::= { tmnxPtpPortStatsTable 1 }
TmnxPtpPortStatsEntry ::= SEQUENCE
{
tmnxPtpPortStatDirection TmnxPtpDirection,
tmnxPtpPortStatAnnounce Counter32,
tmnxPtpPortStatSync Counter32,
tmnxPtpPortStatFollowUp Counter32,
tmnxPtpPortStatDelayRequest Counter32,
tmnxPtpPortStatDelayResponse Counter32,
tmnxPtpPortStatSignaling Counter32,
tmnxPtpPortStatOther Counter32,
tmnxPtpPortStatTimeStampPort Counter32,
tmnxPtpPortStatTimeStampCpm Counter32,
tmnxPtpPortStatDropBadDomain Counter32,
tmnxPtpPortStatDropAltMaster Counter32,
tmnxPtpPortStatDropOutOfSeq Counter32,
tmnxPtpPortStatDropOther Counter32
}
tmnxPtpPortStatDirection OBJECT-TYPE
SYNTAX TmnxPtpDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatDirection specifies which direction the
packet statistics for the particular row are accumulated."
::= { tmnxPtpPortStatsEntry 1 }
tmnxPtpPortStatAnnounce OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatAnnounce indicates the number of
accumulated PTP Announce packets transmitted or received on the
Ethernet port."
::= { tmnxPtpPortStatsEntry 2 }
tmnxPtpPortStatSync OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatSync indicates the number of accumulated
PTP Sync packets transmitted or received on the Ethernet port."
::= { tmnxPtpPortStatsEntry 3 }
tmnxPtpPortStatFollowUp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatFollowUp indicates the number of
accumulated PTP Follow-Up packets transmitted or received on the
Ethernet port.
Because 'tmnxPtpClockStepType' is 'oneStep (1)', the system will
never transmit PTP Follow-Up packets. However, it may receive
PTP Follow-Up packets from a two-step master or boundary clock."
::= { tmnxPtpPortStatsEntry 4 }
tmnxPtpPortStatDelayRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatDelayRequest indicates the number of
accumulated PTP Delay Request packets transmitted or received on the
Ethernet port."
::= { tmnxPtpPortStatsEntry 5 }
tmnxPtpPortStatDelayResponse OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatDelayResponse indicates the number of
accumulated PTP Delay Response packets transmitted or received on the
Ethernet port."
::= { tmnxPtpPortStatsEntry 6 }
tmnxPtpPortStatSignaling OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatSignaling indicates the number of
accumulated PTP Signaling packets received on the Ethernet port.
This object is accumulated in the 'rx' direction only."
::= { tmnxPtpPortStatsEntry 7 }
tmnxPtpPortStatOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatOther indicates the number of accumulated
PTP packets of all other types.
This object is accumulated in the 'rx' direction only."
::= { tmnxPtpPortStatsEntry 8 }
tmnxPtpPortStatTimeStampPort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatTimeStampPort indicates the accumulated
packet statistics for PTP event packets on the Ethernet port where the
timestamp is taken at the physical layer on the Ethernet port."
REFERENCE
"IEEE 1588-2008, Figure 14, timestamp point 'A'."
::= { tmnxPtpPortStatsEntry 9 }
tmnxPtpPortStatTimeStampCpm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatTimeStampCpm indicates the accumulated
packet statistics for PTP event packets where the timestamp is taken
at the operating system kernel on the CPM card."
REFERENCE
"IEEE 1588-2008, Figure 14, timestamp point 'B'."
::= { tmnxPtpPortStatsEntry 10 }
tmnxPtpPortStatDropBadDomain OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatDropBadDomain indicates the accumulated
packet statistics for PTP packets dropped because the PTP domain
indicated in the packet does not match the configured PTP domain.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPortStatsEntry 11 }
tmnxPtpPortStatDropAltMaster OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatDropAltMaster indicates the accumulated
packet statistics for PTP packets dropped because the PTP header has
the 'alternateMasterFlag' set.
This object is accumulated for the 'rx' direction only."
REFERENCE
"IEEE Std 1588-2008 Section 13.3.2.6"
::= { tmnxPtpPortStatsEntry 12 }
tmnxPtpPortStatDropOutOfSeq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatDropOutOfSeq indicates the accumulated
packet statistics for PTP packets dropped because the packets were
received out of sequence.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPortStatsEntry 13 }
tmnxPtpPortStatDropOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPortStatDropOther indicates the accumulated packet
statistics for PTP packets dropped and not counted in
tmnxPtpPortStatDropBadDomain, tmnxPtpPortStatDropAltMaster, and
tmnxPtpPortStatDropOutOfSeq.
This object is accumulated for the 'rx' direction only."
::= { tmnxPtpPortStatsEntry 14 }
tmnxPtpPacketRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPtpPacketRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPtpPacketRateStatsTable contains packet rate statistics for
PTP."
::= { tmnxPtp1588Statistics 5 }
tmnxPtpPacketRateStatsEntry OBJECT-TYPE
SYNTAX TmnxPtpPacketRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A tmnxPtpPacketRateStatsEntry contains the current observed rate of
PTP packets transmitted or received over either UDP/IP or directly
over Ethernet.
The packet rates in each entry are aggregated based on transport type,
and periodically updated by the local clock.
The packet rates are given in units of 'packets per decasecond', in
order to accurately indicate packet rates of less than one packet per
second. For example, the default announce rate is only one packet
every two seconds. This corresponds to tmnxPtpPacketRateStatsAnnounce
having a value of 5, which is 0.5 packets per second.
Entries in tmnxPtpPacketRateStatsTable are automatically created by the
system during system initialization. The system creates rows with
tmnxPtpPacketRateStatsTransport equal to 'udpIp (2)' and
'ethernet (3)', but not 'none (1)'."
INDEX {
tmnxPtpPacketRateStatsTransport,
tmnxPtpPacketRateStatsDirection
}
::= { tmnxPtpPacketRateStatsTable 1 }
TmnxPtpPacketRateStatsEntry ::= SEQUENCE
{
tmnxPtpPacketRateStatsTransport TmnxPtpTransportType,
tmnxPtpPacketRateStatsDirection TmnxPtpDirection,
tmnxPtpPacketRateStatsAnnounce Unsigned32,
tmnxPtpPacketRateStatsSync Unsigned32,
tmnxPtpPacketRateStatsFollowUp Unsigned32,
tmnxPtpPacketRateStatsDelayReq Unsigned32,
tmnxPtpPacketRateStatsDelayResp Unsigned32,
tmnxPtpPacketRateStatsOther Unsigned32
}
tmnxPtpPacketRateStatsTransport OBJECT-TYPE
SYNTAX TmnxPtpTransportType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsTransport specifies the transport
type of the PTP packets whose rate is calculated."
::= { tmnxPtpPacketRateStatsEntry 1 }
tmnxPtpPacketRateStatsDirection OBJECT-TYPE
SYNTAX TmnxPtpDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsDirection specifies which direction
the packet rates for the particular row are calculated."
::= { tmnxPtpPacketRateStatsEntry 2 }
tmnxPtpPacketRateStatsAnnounce OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per decasecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsAnnounce indicates the rate of PTP
announce packets transmitted or received by the local PTP clock."
::= { tmnxPtpPacketRateStatsEntry 3 }
tmnxPtpPacketRateStatsSync OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per decasecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsSync indicates the rate of PTP sync
packets transmitted or received by the local PTP clock over either
UDP/IP or Ethernet."
::= { tmnxPtpPacketRateStatsEntry 4 }
tmnxPtpPacketRateStatsFollowUp OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per decasecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsFollowUp indicates the rate of PTP
follow-up packets transmitted or received by the local PTP clock.
When tmnxPtpPacketRateStatsDirection is 'tx (2)',
tmnxPtpPacketRateStatsFollowUp will have a value of 0, since PTP is
implemented as a one-step clock."
::= { tmnxPtpPacketRateStatsEntry 5 }
tmnxPtpPacketRateStatsDelayReq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per decasecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsDelayReq indicates the rate of PTP
delay request packets transmitted or received by the local PTP clock."
::= { tmnxPtpPacketRateStatsEntry 6 }
tmnxPtpPacketRateStatsDelayResp OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per decasecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsDelayResp indicates the rate of PTP
delay response packets transmitted or received by the local PTP clock."
::= { tmnxPtpPacketRateStatsEntry 7 }
tmnxPtpPacketRateStatsOther OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per decasecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPtpPacketRateStatsOther indicates the rate of PTP
packets of all other types not covered by the previous five objects,
which are transmitted or received by the local PTP clock.
When tmnxPtpPacketRateStatsTransport is 'udpIp (2)', this will include
PTP signaling packets.
When tmnxPtpPacketRateStatsDirection is 'rx (1)', this will include
PTP packet types that are not supported by the current implementation,
such as PTP management or peer delay request and response packets."
::= { tmnxPtpPacketRateStatsEntry 8 }
tmnxPtp1588NotifyObjects OBJECT IDENTIFIER ::= { tmnxPtp1588Objs 10 }
tmnxPtpMasterClockLastIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockLastIpAddrType indicates, along with
the value of tmnxPtpMasterClockLastIpAddress, the IP Address of the
parent clock that was last chosen by the local clock.
This object is only valid when tmnxPtpMasterClockLastTransType is
'udpIp (2)'."
::= { tmnxPtp1588NotifyObjects 1 }
tmnxPtpMasterClockLastIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockLastIpAddress indicates, along with the
value of tmnxPtpMasterClockLastIpAddrType, the IP Address of the
parent clock that was last chosen by the local clock.
This object is only valid when tmnxPtpMasterClockLastTransType is
'udpIp (2)'."
::= { tmnxPtp1588NotifyObjects 2 }
tmnxPtpNotifyRowPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpNotifyRowPointer indicates a row in a table that
has triggered a notification."
::= { tmnxPtp1588NotifyObjects 3 }
tmnxPtpNotifyRowDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpNotifyRowDescription indicates the description
explaining the cause of the notification."
::= { tmnxPtp1588NotifyObjects 4 }
tmnxPtpMasterClockLastTransType OBJECT-TYPE
SYNTAX TmnxPtpTransportType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockLastTransType indicates the type of
transport that was last used by the parent clock.
When the value is 'none (1)', the local clock was last used as the
parent clock.
When the value is 'udpIp (2)', tmnxPtpMasterClockLastIpAddrType and
tmnxPtpMasterClockLastIpAddress contain information about the parent
clock that was last used.
When the value is 'ethernet (3)', tmnxPtpMasterClockLastEthPort and
tmnxPtpMasterClockLastMacAddress contain information about the parent
clock that was last used."
::= { tmnxPtp1588NotifyObjects 5 }
tmnxPtpMasterClockLastEthPort OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockLastEthPort indicates the Ethernet port
of the parent clock that was last used. This object is only valid in
tmnxPtpMasterClockChangedEvent when tmnxPtpMasterClockLastTransType is
'ethernet (3)'."
::= { tmnxPtp1588NotifyObjects 6 }
tmnxPtpMasterClockLastMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpMasterClockLastMacAddress indicates the MAC
address of the parent clock that was last used. This object is only
valid in tmnxPtpMasterClockChangedEvent when
tmnxPtpMasterClockLastTransType is 'ethernet (3)'."
::= { tmnxPtp1588NotifyObjects 7 }
tmnxPtpNotifyPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxPtpNotifyPortId indicates the port identifier of the
PTP port."
::= { tmnxPtp1588NotifyObjects 8 }
tmnxPtp1588Conformance OBJECT IDENTIFIER ::= { tmnxSRConfs 74 }
tmnxPtp1588Compliances OBJECT IDENTIFIER ::= { tmnxPtp1588Conformance 1 }
tmnxPtpCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for the management of the Precision Timing
Protocol for Release 9.0 on SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxPtpTimeStampGroup,
tmnxPtpLocalConfigGroup,
tmnxPtpLocalOperGroup,
tmnxPtpMasterClockGroup,
tmnxPtpPeerBaseConfigGroup,
tmnxPtpPeerMasterStatusGroup,
tmnxPtpPacketStatsGroup,
tmnxPtpClockRecoveryGroup,
tmnxPtpPeerUnicastStatusGroup,
tmnxPtpNotificationsGroup
}
::= { tmnxPtp1588Compliances 1 }
tmnxPtpComplianceV10v0 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for the management of the Precision Timing
Protocol for Release 10.0 on SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxPtpTimeStampGroup,
tmnxPtpLocalConfigGroup,
tmnxPtpLocalOperGroup,
tmnxPtpMasterClockGroup,
tmnxPtpPeerBaseConfigGroup,
tmnxPtpPeerMasterStatusGroup,
tmnxPtpPacketStatsGroup,
tmnxPtpClockRecoveryGroup,
tmnxPtpPeerUnicastStatusGroup,
tmnxPtpNotificationsGroup,
tmnxPtpVRtrIfTimeStampGroup,
tmnxPtpVRtrIfConfigGroup,
tmnxPtpTimeInfoGroup,
tmnxPtpPeerOperGroup,
tmnxPtpPacketStatsV10v0Group
}
::= { tmnxPtp1588Compliances 2 }
tmnxPtpComplianceV11v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the Precision Timing
Protocol for Release 11.0 on SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxPtpTimeStampGroup,
tmnxPtpLocalConfigGroup,
tmnxPtpLocalOperGroup,
tmnxPtpMasterClockGroup,
tmnxPtpPeerBaseConfigGroup,
tmnxPtpPeerMasterStatusGroup,
tmnxPtpPacketStatsGroup,
tmnxPtpClockRecoveryGroup,
tmnxPtpPeerUnicastStatusGroup,
tmnxPtpNotificationsGroup,
tmnxPtpVRtrIfTimeStampGroup,
tmnxPtpVRtrIfConfigGroup,
tmnxPtpTimeInfoGroup,
tmnxPtpPeerOperGroup,
tmnxPtpPacketStatsV10v0Group,
tmnxPtpVRtrGroup
}
::= { tmnxPtp1588Compliances 3 }
tmnxPtpComplianceV12v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the Precision Timing
Protocol for Release 12.0 on SROS series systems. The corresponding
base module compliance statement is tmnxPtpComplianceV11v0."
MODULE
MANDATORY-GROUPS {
tmnxPtpLocalConfigV12v0Group,
tmnxPtpPeerBaseConfigV12v0Group,
tmnxPtpMasterClockV12v0Group,
tmnxPtpPortGroup,
tmnxPtpPortStatsGroup,
tmnxPtpPacketRateStatsGroup,
tmnxPtpNotifyObjsV12v0Group,
tmnxPtpNotificationsV12v0Group
}
::= { tmnxPtp1588Compliances 4 }
tmnxPtpComplianceV13v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the Precision Timing
Protocol for Release 13.0 on SROS series systems. The corresponding
base module compliance statement is tmnxPtpComplianceV12v0."
MODULE
MANDATORY-GROUPS {
tmnxPtpConfigV13v0Group
}
::= { tmnxPtp1588Compliances 5 }
tmnxPtp1588Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Conformance 2 }
tmnxPtpV9v0Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Groups 1 }
tmnxPtpTimeStampGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPeerConfigTblLastChanged
}
STATUS current
DESCRIPTION
"The group of objects maintaining table/row statistics for Precision
Timing Protocol (PTP) on the SROS series system."
::= { tmnxPtpV9v0Groups 1 }
tmnxPtpLocalConfigGroup OBJECT-GROUP
OBJECTS {
tmnxPtpClockAdminState,
tmnxPtpClockClockType,
tmnxPtpClockProfile,
tmnxPtpClockDomain,
tmnxPtpClockPriority1,
tmnxPtpClockPriority2,
tmnxPtpClockNetworkType
}
STATUS current
DESCRIPTION
"The group of objects maintaining system configuration for the
Precision Timing Protocol (PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 2 }
tmnxPtpLocalOperGroup OBJECT-GROUP
OBJECTS {
tmnxPtpClockIdentity,
tmnxPtpClockOperState,
tmnxPtpClockStepType,
tmnxPtpClockClass,
tmnxPtpClockAccuracy,
tmnxPtpClockVariance,
tmnxPtpClockPortState,
tmnxPtpClockPortStateLastChanged,
tmnxPtpClockRecoveryState,
tmnxPtpClockRecoveryStateLastChg,
tmnxPtpClockFrequencyOffset
}
STATUS current
DESCRIPTION
"The group of objects indicating system operational states for the
Precision Timing Protocol (PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 3 }
tmnxPtpMasterClockGroup OBJECT-GROUP
OBJECTS {
tmnxPtpMasterClockAddressType,
tmnxPtpMasterClockAddress,
tmnxPtpMasterClockGMClockId,
tmnxPtpMasterClockGMClockPrio1,
tmnxPtpMasterClockGMClockPrio2,
tmnxPtpMasterClockGMClockClass,
tmnxPtpMasterClockGMAccuracy,
tmnxPtpMasterClockGMVariance,
tmnxPtpMasterClockParentClockId,
tmnxPtpMasterClockParentPortNum
}
STATUS current
DESCRIPTION
"The group of objects indicating system operational states for the
Master Clock for the Precision Timing Protocol (PTP) on SROS series
systems."
::= { tmnxPtpV9v0Groups 4 }
tmnxPtpPeerBaseConfigGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPeerRowStatus,
tmnxPtpPeerLastChanged,
tmnxPtpPeerAdminState,
tmnxPtpPeerPortState,
tmnxPtpPeerLocalPriority,
tmnxPtpPeerRemoteMaster,
tmnxPtpPeerRemoteSlave,
tmnxPtpPeerClockId,
tmnxPtpPeerLocalPortNumber,
tmnxPtpPeerRemotePortNumber
}
STATUS current
DESCRIPTION
"The group of objects maintaining Peer configuration for the Precision
Timing Protocol (PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 5 }
tmnxPtpPeerMasterStatusGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPeerMasterCurrentMaster,
tmnxPtpPeerMasterClockStepType,
tmnxPtpPeerMasterClockStepsRemvd,
tmnxPtpPeerMasterGMClockId,
tmnxPtpPeerMasterGMClockPrio1,
tmnxPtpPeerMasterGMClockPrio2,
tmnxPtpPeerMasterGMClockClass,
tmnxPtpPeerMasterGMClockAccuracy,
tmnxPtpPeerMasterGMClockVariance,
tmnxPtpPeerMasterAlarm
}
STATUS current
DESCRIPTION
"The group of objects indicating operational states for Master Peers
for the Precision Timing Protocol (PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 6 }
tmnxPtpPacketStatsGroup OBJECT-GROUP
OBJECTS {
tmnxPtpClkPktStatsAnnounce,
tmnxPtpClkPktStatsSync,
tmnxPtpClkPktStatsFollowUp,
tmnxPtpClkPktStatsDelayRequest,
tmnxPtpClkPktStatsDelayResp,
tmnxPtpClkPktStatsSignaling,
tmnxPtpClkPktStatsOther,
tmnxPtpClkPktStatsUniReqAnno,
tmnxPtpClkPktStatsUniReqSync,
tmnxPtpClkPktStatsUniReqDelayRsp,
tmnxPtpClkPktStatsUniGrantAnno,
tmnxPtpClkPktStatsUniGrantSync,
tmnxPtpClkPktStatsUniGrantDelRsp,
tmnxPtpClkPktStatsUniDenyAnno,
tmnxPtpClkPktStatsUniDenySync,
tmnxPtpClkPktStatsUniDenyDelRsp,
tmnxPtpClkPktStatsUniCancelAnno,
tmnxPtpClkPktStatsUniCancelSync,
tmnxPtpClkPktStatsUniCancelDelay,
tmnxPtpClkPktStatsUniAckCnclAnno,
tmnxPtpClkPktStatsUniAckCnclSync,
tmnxPtpClkPktStatsUniAckCnclDly,
tmnxPtpClkPktStatsOtherTLVs,
tmnxPtpClkPktStatsDropBadDomain,
tmnxPtpClkPktStatsDropAltMaster,
tmnxPtpClkPktStatsDropOther,
tmnxPtpClkPktStatsDropOutOfSeq,
tmnxPtpClkPktStatsDropPeerShut,
tmnxPtpPeerPktStatAnnounce,
tmnxPtpPeerPktStatSync,
tmnxPtpPeerPktStatFollowUp,
tmnxPtpPeerPktStatDelayRequest,
tmnxPtpPeerPktStatDelayResp,
tmnxPtpPeerPktStatSignaling,
tmnxPtpPeerPktStatOther,
tmnxPtpPeerPktStatUniReqAnno,
tmnxPtpPeerPktStatUniReqSync,
tmnxPtpPeerPktStatUniReqDelayRsp,
tmnxPtpPeerPktStatUniGrantAnno,
tmnxPtpPeerPktStatUniGrantSync,
tmnxPtpPeerPktStatUniGrantDelRsp,
tmnxPtpPeerPktStatUniDenyAnno,
tmnxPtpPeerPktStatUniDenySync,
tmnxPtpPeerPktStatUniDenyDelRsp,
tmnxPtpPeerPktStatUniCancelAnno,
tmnxPtpPeerPktStatUniCancelSync,
tmnxPtpPeerPktStatUniCancelDelay,
tmnxPtpPeerPktStatUniAckCnclAnno,
tmnxPtpPeerPktStatUniAckCnclSync,
tmnxPtpPeerPktStatUniAckCnclDly,
tmnxPtpPeerPktStatOtherTLVs,
tmnxPtpPeerPktStatDropBadDomain,
tmnxPtpPeerPktStatDropAltMaster,
tmnxPtpPeerPktStatDropOther,
tmnxPtpPeerPktStatDropOutOfSeq,
tmnxPtpPeerPktStatDropPeerShut
}
STATUS current
DESCRIPTION
"The group of objects indicating packet statistics for the Precision
Timing Protocol (PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 7 }
tmnxPtpClockRecoveryGroup OBJECT-GROUP
OBJECTS {
tmnxPtpClockRecStatsInitial,
tmnxPtpClockRecStatsAcquiring,
tmnxPtpClockRecStatsPhaseTrack,
tmnxPtpClockRecStatsLocked,
tmnxPtpClockRecStatsHoldover,
tmnxPtpClockRecStatsSyncPktLoss,
tmnxPtpClockRecStatsSyncHiPktLss,
tmnxPtpClockRecStatsSyncStep,
tmnxPtpClockRecStatsSyncHighPDV,
tmnxPtpClockRecStatsDlyPktLoss,
tmnxPtpClockRecStatsDlyHiPktLss,
tmnxPtpClockRecStatsDlyStep,
tmnxPtpClockRecStatsDlyHighPDV
}
STATUS current
DESCRIPTION
"The group of objects indicating the clock recovery state and event
statistics for the Precision Timing Protocol (PTP) on SROS series
systems."
::= { tmnxPtpV9v0Groups 8 }
tmnxPtpPeerUnicastStatusGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPeerUnicastStatus,
tmnxPtpPeerUnicastRate,
tmnxPtpPeerUnicastDuration,
tmnxPtpPeerUnicastEventTime
}
STATUS current
DESCRIPTION
"The group of objects indicating the Peer Unicast Status information
for the Precision Timing Protocol (PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 9 }
tmnxPtpNotifyObjsGroup OBJECT-GROUP
OBJECTS {
tmnxPtpMasterClockLastIpAddrType,
tmnxPtpMasterClockLastIpAddress,
tmnxPtpNotifyRowPointer,
tmnxPtpNotifyRowDescription
}
STATUS current
DESCRIPTION
"The group of objects used in notifications generated by the Precision
Timing Protocol (PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 10 }
tmnxPtpNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxPtpCardNotSupported,
tmnxPtpCardNotSupportedClear,
tmnxPtpMasterClockChangedEvent,
tmnxPtpClockRecoveryStateChange,
tmnxPtpOutOfResources,
tmnxPtpOutOfResourcesClear,
tmnxPtpDynamicChange
}
STATUS current
DESCRIPTION
"The group of notifications generated by the Precision Timing Protocol
(PTP) on SROS series systems."
::= { tmnxPtpV9v0Groups 11 }
tmnxPtpV10v0Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Groups 2 }
tmnxPtpVRtrIfTimeStampGroup OBJECT-GROUP
OBJECTS {
tmnxPtpVRtrIfTableLastChanged
}
STATUS current
DESCRIPTION
"The group of objects maintaining table/row statistics for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems."
::= { tmnxPtpV10v0Groups 1 }
tmnxPtpVRtrIfConfigGroup OBJECT-GROUP
OBJECTS {
tmnxPtpVRtrIfAdminState
}
STATUS current
DESCRIPTION
"The group of objects maintaining interface configuration for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems."
::= { tmnxPtpV10v0Groups 2 }
tmnxPtpTimeInfoGroup OBJECT-GROUP
OBJECTS {
tmnxPtpTimeInfoTimescale,
tmnxPtpTimeInfoCurrentTime,
tmnxPtpTimeInfoFreqTraceable,
tmnxPtpTimeInfoTimeTraceable,
tmnxPtpTimeInfoTimeSource
}
STATUS current
DESCRIPTION
"The group of objects maintaining interface operational state for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems."
::= { tmnxPtpV10v0Groups 3 }
tmnxPtpPeerOperGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPeerTxTimeStampPoint,
tmnxPtpPeerLastTxPortId,
tmnxPtpPeerLastTxPortEncapType,
tmnxPtpPeerLastTxPortEncapValue,
tmnxPtpPeerRxTimeStampPoint,
tmnxPtpPeerLastRxPortId,
tmnxPtpPeerLastRxPortEncapType,
tmnxPtpPeerLastRxPortEncapValue
}
STATUS current
DESCRIPTION
"The group of objects maintaining peer operational state for the
Precision Timing Protocol (PTP) on version 10.0 of SROS series
systems."
::= { tmnxPtpV10v0Groups 5 }
tmnxPtpPacketStatsV10v0Group OBJECT-GROUP
OBJECTS {
tmnxPtpClkPktStatsTimeStampPort,
tmnxPtpClkPktStatsTimeStampCpm,
tmnxPtpPeerPktStatTimeStampPort,
tmnxPtpPeerPktStatTimeStampCpm
}
STATUS current
DESCRIPTION
"The group of objects indicating packet statistics for the Precision
Timing Protocol (PTP) on version 10.0 of SROS series systems."
::= { tmnxPtpV10v0Groups 6 }
tmnxPtpV11v0Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Groups 3 }
tmnxPtpVRtrGroup OBJECT-GROUP
OBJECTS {
tmnxPtpVRtrTableLastChanged,
tmnxPtpVRtrRowStatus,
tmnxPtpVRtrLastChanged,
tmnxPtpVRtrAdminState,
tmnxPtpVRtrOperState,
tmnxPtpVRtrPeerLimit
}
STATUS current
DESCRIPTION
"The group of objects maintaining virtual router instance configuration
and status for the Precision Timing Protocol (PTP) on version 11.0 of
SROS series systems."
::= { tmnxPtpV11v0Groups 1 }
tmnxPtpV12v0Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Groups 4 }
tmnxPtpLocalConfigV12v0Group OBJECT-GROUP
OBJECTS {
tmnxPtpClockAnnounceInterval,
tmnxPtpClockAnnoRxTimeout
}
STATUS current
DESCRIPTION
"The group of additional objects that maintain system configuration for
the Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems."
::= { tmnxPtpV12v0Groups 1 }
tmnxPtpPeerBaseConfigV12v0Group OBJECT-GROUP
OBJECTS {
tmnxPtpPeerSyncInterval
}
STATUS current
DESCRIPTION
"The group of additional objects that maintain Peer configuration for
the Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems."
::= { tmnxPtpV12v0Groups 2 }
tmnxPtpMasterClockV12v0Group OBJECT-GROUP
OBJECTS {
tmnxPtpMasterClockTransportType,
tmnxPtpMasterClockEthernetPort,
tmnxPtpMasterClockMacAddress
}
STATUS current
DESCRIPTION
"The group of objects indicating system operational states for the
Parent/Master Clock for the Precision Timing Protocol (PTP) on version
12.0 of SROS series systems."
::= { tmnxPtpV12v0Groups 3 }
tmnxPtpPortGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPortTableLastChanged,
tmnxPtpPortRowStatus,
tmnxPtpPortLastChanged,
tmnxPtpPortAdminState,
tmnxPtpPortSyncInterval,
tmnxPtpPortDelayInterval,
tmnxPtpPortMulticastAddress,
tmnxPtpPortLocalPortNumber,
tmnxPtpPortOperState,
tmnxPtpPortState,
tmnxPtpPortTimeStampRefPoint,
tmnxPtpPortNeighbors,
tmnxPtpPortTxPacketRate,
tmnxPtpPortRxPacketRate,
tmnxPtpPortSrcMacAddr,
tmnxPtpPortNeighborClockId,
tmnxPtpPortNeighborPtpPortNumber,
tmnxPtpPortNeighborRxPacketRate
}
STATUS current
DESCRIPTION
"The group of objects maintaining Ethernet port configuration and
status for the Precision Timing Protocol (PTP) on version 12.0 of SROS
series systems."
::= { tmnxPtpV12v0Groups 4 }
tmnxPtpPortStatsGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPortStatAnnounce,
tmnxPtpPortStatSync,
tmnxPtpPortStatFollowUp,
tmnxPtpPortStatDelayRequest,
tmnxPtpPortStatDelayResponse,
tmnxPtpPortStatSignaling,
tmnxPtpPortStatOther,
tmnxPtpPortStatTimeStampPort,
tmnxPtpPortStatTimeStampCpm,
tmnxPtpPortStatDropBadDomain,
tmnxPtpPortStatDropAltMaster,
tmnxPtpPortStatDropOutOfSeq,
tmnxPtpPortStatDropOther
}
STATUS current
DESCRIPTION
"The group of objects maintaining Ethernet port statistics for the
Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems."
::= { tmnxPtpV12v0Groups 5 }
tmnxPtpPacketRateStatsGroup OBJECT-GROUP
OBJECTS {
tmnxPtpPacketRateStatsAnnounce,
tmnxPtpPacketRateStatsSync,
tmnxPtpPacketRateStatsFollowUp,
tmnxPtpPacketRateStatsDelayReq,
tmnxPtpPacketRateStatsDelayResp,
tmnxPtpPacketRateStatsOther
}
STATUS current
DESCRIPTION
"The group of objects maintaining overall packet rate statistics for
the Precision Timing Protocol (PTP) on version 12.0 of SROS series
systems."
::= { tmnxPtpV12v0Groups 6 }
tmnxPtpNotifyObjsV12v0Group OBJECT-GROUP
OBJECTS {
tmnxPtpMasterClockLastTransType,
tmnxPtpMasterClockLastEthPort,
tmnxPtpMasterClockLastMacAddress,
tmnxPtpNotifyPortId
}
STATUS current
DESCRIPTION
"The group of objects used in notifications generated by the Precision
Timing Protocol (PTP) on version 12.0 of SROS series systems."
::= { tmnxPtpV12v0Groups 7 }
tmnxPtpNotificationsV12v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxPtpPortNoTimestamping
}
STATUS current
DESCRIPTION
"The group of notifications generated by the Precision Timing Protocol
(PTP) on version 12.0 of SROS series systems."
::= { tmnxPtpV12v0Groups 8 }
tmnxPtpV13v0Groups OBJECT IDENTIFIER ::= { tmnxPtp1588Groups 5 }
tmnxPtpConfigV13v0Group OBJECT-GROUP
OBJECTS {
tmnxPtpClockLocalPriority,
tmnxPtpPortLocalPriority,
tmnxPtpPortMasterOnly
}
STATUS current
DESCRIPTION
"The group of additional objects that maintain system configuration for
the Precision Timing Protocol (PTP) on version 13.0 of SROS series
systems."
::= { tmnxPtpV13v0Groups 1 }
tmnxPtp1588NotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 74 }
tmnxPtp1588Notifications OBJECT IDENTIFIER ::= { tmnxPtp1588NotifyPrefix 0 }
tmnxPtpCardNotSupported NOTIFICATION-TYPE
OBJECTS {
tmnxCpmCardOscillatorType,
tmnxPtpClockClockType,
tmnxPtpClockAdminState
}
STATUS current
DESCRIPTION
"The tmnxPtpCardNotSupported notification is generated when the
Precision Timing Protocol (PTP) is enabled on a card that is not
capable of clock recovery using PTP.
This notification is triggered when the
TIMETRA-CHASSIS-MIB::tmnxCpmCardOscillatorType is not 'ocxo (3)', the
tmnxPtpClockClockType is set to 'ordinarySlave (1)' or 'boundary (3)',
and tmnxPtpClockAdminState is set to 'inService (2)'.
[EFFECT] While this event is active, tmnxPtpClockOperState will be
'outOfService (3)' on the card that this notification was generated.
[RECOVERY] This event is cleared when a replacement CPM card with an
Oscillator of type 'ocxo (3)' is inserted.
tmnxPtpCardNotSupportedClear is generated when this event is cleared."
::= { tmnxPtp1588Notifications 1 }
tmnxPtpCardNotSupportedClear NOTIFICATION-TYPE
OBJECTS {
tmnxCpmCardOscillatorType,
tmnxPtpClockClockType,
tmnxPtpClockAdminState
}
STATUS current
DESCRIPTION
"The tmnxPtpCardNotSupportedClear notification is generated when the
tmnxPtpCardNotSupported event is cleared for a particular CPM card."
::= { tmnxPtp1588Notifications 2 }
tmnxPtpMasterClockChangedEvent NOTIFICATION-TYPE
OBJECTS {
tmnxPtpMasterClockAddressType,
tmnxPtpMasterClockAddress,
tmnxPtpMasterClockLastIpAddrType,
tmnxPtpMasterClockLastIpAddress,
tmnxPtpMasterClockTransportType,
tmnxPtpMasterClockEthernetPort,
tmnxPtpMasterClockMacAddress,
tmnxPtpMasterClockLastTransType,
tmnxPtpMasterClockLastEthPort,
tmnxPtpMasterClockLastMacAddress
}
STATUS current
DESCRIPTION
"The tmnxPtpMasterClockChangedEvent is generated when the Master/Parent
Clock for the Precision Timing Protocol (PTP) changes on the system."
::= { tmnxPtp1588Notifications 3 }
tmnxPtpClockRecoveryStateChange NOTIFICATION-TYPE
OBJECTS {
tmnxPtpClockRecoveryState
}
STATUS current
DESCRIPTION
"The tmnxPtpClockRecoveryStateChange is generated when the Precision
Timing Protocol (PTP) clock recovery state changes on the system."
::= { tmnxPtp1588Notifications 4 }
tmnxPtpOutOfResources NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyChassisId,
tmnxChassisNotifyHwIndex
}
STATUS current
DESCRIPTION
"The tmnxPtpOutOfResources notification is generated when the Precision
Timing Protocol (PTP) process on the card is out of resources.
This may occur in either two situations:
1. The number of PTP peers exceeds the system limit.
2. The total unicast packet rate negotiated with all PTP peers
has reached the maximum packet rate supported by the system.
Exceeding this rate would impact the ability of the master clock
to provide an accurate stream of timing packets to each remote
slave clock.
If either of the two situations above occur, the PTP process will
reject any new unicast packet requests from remote slave PTP peers.
tmnxPtpOutOfResourcesClear is generated when this event is cleared."
::= { tmnxPtp1588Notifications 5 }
tmnxPtpOutOfResourcesClear NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyChassisId,
tmnxChassisNotifyHwIndex
}
STATUS current
DESCRIPTION
"The tmnxPtpOutOfResourcesClear notification is generated when both the
total number of active PTP peers and the total negotiated unicast
packet rate goes below 90% of the system limit."
::= { tmnxPtp1588Notifications 6 }
tmnxPtpDynamicChange NOTIFICATION-TYPE
OBJECTS {
tmnxPtpNotifyRowPointer,
tmnxPtpNotifyRowDescription
}
STATUS current
DESCRIPTION
"The tmnxPtpDynamicChange notification is generated when an object
dynamically (i.e. not by configuration) changes state. This
notification identifies the affected row."
::= { tmnxPtp1588Notifications 7 }
tmnxPtpPortNoTimestamping NOTIFICATION-TYPE
OBJECTS {
tmnxPtpNotifyPortId
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxPtpPortNoTimestamping notification is generated when a
PTP port is created and the associated Ethernet port does not support
IEEE 1588-2008 port-based timestamping.
[EFFECT] The PTP port is created but the performance may be degraded
due to timestamping at the CPM. For optimal performance, ensure PTP is
enabled on ports with IEEE 1588-2008 port-based timestamping
capability.
[RECOVERY] The Ethernet port used for the PTP port should be changed
to a port on an MDA that supports IEEE 1588-2008 port-based
timestamping."
::= { tmnxPtp1588Notifications 8 }
END
View Git Blame Copy Permalink