WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/nokia/TIMETRA-PIM-NG-MIB

13088 lines
476 KiB
Plaintext
Raw Permalink Blame History

TIMETRA-PIM-NG-MIB DEFINITIONS ::= BEGIN
IMPORTS
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddress, InetAddressPrefixLength,
InetAddressType
FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, Counter64, Gauge32,
Integer32, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
DisplayString, RowStatus, TimeStamp,
TruthValue
FROM SNMPv2-TC
tmnxCardHwIndex
FROM TIMETRA-CHASSIS-MIB
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
tmnxMcacLagPortsDown, tmnxMcacLevelId
FROM TIMETRA-MCAST-CAC-MIB
sapEncapValue, sapPortId
FROM TIMETRA-SAP-MIB
IpAddressPrefixLength, TNamedItem,
TNamedItemOrEmpty,
TPolicyStatementNameOrEmpty,
TmnxAdminState, TmnxEnabledDisabled,
TmnxMulticastAddrFamily, TmnxOperState,
TmnxServId, TmnxVPNRouteDistinguisher,
TmnxVRtrID
FROM TIMETRA-TC-MIB
vRtrID, vRtrIfIndex
FROM TIMETRA-VRTR-MIB
;
timetraPimNgMIBModule MODULE-IDENTITY
LAST-UPDATED "201701010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the
extensions to the PIM routing protocol for the Nokia SROS device.
Copyright 2008-2018 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201701010000Z"
DESCRIPTION
"Rev 15.0 1 Jan 2017 00:00
15.0 release of the TIMETRA-PIM-NG-MIB."
REVISION "201601010000Z"
DESCRIPTION
"Rev 14.0 1 Jan 2016 00:00
14.0 release of the TIMETRA-PIM-NG-MIB."
REVISION "201501010000Z"
DESCRIPTION
"Rev 13.0 1 Jan 2015 00:00
13.0 release of the TIMETRA-PIM-NG-MIB."
REVISION "201401010000Z"
DESCRIPTION
"Rev 12.0 1 Jan 2014 00:00
12.0 release of the TIMETRA-PIM-NG-MIB."
REVISION "201102010000Z"
DESCRIPTION
"Rev 9.0 1 Feb 2011 00:00
9.0 release of the TIMETRA-PIM-NG-MIB."
REVISION "200902280000Z"
DESCRIPTION
"Rev 7.0 28 Feb 2009 00:00
7.0 release of the TIMETRA-PIM-NG-MIB."
REVISION "200801010000Z"
DESCRIPTION
"Rev 0.1 01 Jan 2008 00:00
Initial version of the TIMETRA-PIM-NG-MIB."
::= { timetraSRMIBModules 50 }
tmnxPimNgObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 50 }
vRtrPimNgProtocolObjs OBJECT IDENTIFIER ::= { tmnxPimNgObjs 1 }
vRtrPimNgGeneralTableLstChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGeneralTableLstChanged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgGeneralTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 1 }
vRtrPimNgGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrPimNgGeneralTable contains objects for general control and
management of the PIM protocol instance within a virtual router."
::= { vRtrPimNgProtocolObjs 2 }
vRtrPimNgGeneralEntry OBJECT-TYPE
SYNTAX VRtrPimNgGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of the PIM protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is
set to 'create'. The entry is destroyed when vRtrPimStatus is set
to 'delete'"
INDEX { vRtrID }
::= { vRtrPimNgGeneralTable 1 }
VRtrPimNgGeneralEntry ::= SEQUENCE
{
vRtrPimNgGenRowLastChanged TimeStamp,
vRtrPimNgGenAdminState TmnxAdminState,
vRtrPimNgGenOperState TmnxOperState,
vRtrPimNgGenCreateInterfaces INTEGER,
vRtrPimNgGenMaxMdts Integer32,
vRtrPimNgGenNonDrAttractTraffic TruthValue,
vRtrPimNgGenEcmpBalance TruthValue,
vRtrPimNgGenEcmpBalanceHoldTime Unsigned32,
vRtrPimNgGenEcmpReBlncInProg TruthValue,
vRtrPimNgGenEcmpLastReBlncTime TimeStamp,
vRtrPimNgGenEcmpRebalanceType INTEGER,
vRtrPimNgGenEcmpOptThreshold Unsigned32,
vRtrPimNgGenEcmpNextBalanceTime Unsigned32,
vRtrPimNgGenLagUsageOptimize TruthValue,
vRtrPimNgGenEcmpHashingEnabled TruthValue,
vRtrPimNgGenEnableMdtSpt TruthValue,
vRtrPimNgGenRpfVectorFlags BITS,
vRtrPimNgGenEcmpHashRebalance TruthValue,
vRtrPimNgGenMultiStreamSpmsi TruthValue,
vRtrPimNgGenBgpNhOverride TruthValue,
vRtrPimNgGenPimSsmScaling TruthValue,
vRtrPimNgGenMtuOverHead Integer32
}
vRtrPimNgGenRowLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenRowLastChanged indicates the sysUpTime when
this row was last modified."
::= { vRtrPimNgGeneralEntry 1 }
vRtrPimNgGenAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenAdminState specifies the current
administrative state of this PIM protocol instance on this virtual
router.
When vRtrPimNgGenAdminState is set to 'inService', the agent attempts
to enable the PIM protocol instance on this virtual router.
When vRtrPimNgGenAdminState is set to 'outOfService', the agent
attempts to disable the PIM protocol instance on this router."
DEFVAL { outOfService }
::= { vRtrPimNgGeneralEntry 2 }
vRtrPimNgGenOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenOperState indicates the current operating
state of this PIM protocol instance on this router."
::= { vRtrPimNgGeneralEntry 3 }
vRtrPimNgGenCreateInterfaces OBJECT-TYPE
SYNTAX INTEGER {
ies (1),
non-ies (2),
all (3),
none (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenCreateInterfaces specifies the PIM interfaces
with default parameters. Setting the value of this object to 'ies'
creates all IES interfaces in PIM.
When the value of vRtrPimNgGenCreateInterfaces is set to 'all', all
IES and non IES interfaces are created in PIM.
When the value of vRtrPimNgGenCreateInterfaces is set to 'none', all
interfaces that are not manually created or modified are removed."
DEFVAL { none }
::= { vRtrPimNgGeneralEntry 4 }
vRtrPimNgGenMaxMdts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenMaxMdts indicates the maximum number of
Multicast Distribution Trees (MDTs) that can be configured on the
system."
::= { vRtrPimNgGeneralEntry 5 }
vRtrPimNgGenNonDrAttractTraffic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenNonDrAttractTraffic specifies whether the
router should ignore the designated router state and attract traffic
even when it is not the designated router. If the value is 'true', the
DR state is ignored, and if it's 'false', the DR value is honored."
DEFVAL { false }
::= { vRtrPimNgGeneralEntry 6 }
vRtrPimNgGenEcmpBalance OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpBalance specifies whether the multicast
balancing of traffic over ECMP links is enabled or not.
If the value of vRtrPimNgGenEcmpBalance is 'true', each and every
multicast stream that needs to be forwarded over an ECMP link will be
re-evaluated for the total multicast bandwidth utilization.
Re-evaluation will happen on the ECMP interface in question.
The value of vRtrPimNgGenEcmpBalance is mutually exclusive with the
value of vRtrPimNgGenEcmpHashingEnabled in the same context.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of vRtrPimNgGenEcmpBalance to 'true' when the value of
vRtrPimNgGenEcmpHashingEnabled is set to 'true'."
DEFVAL { true }
::= { vRtrPimNgGeneralEntry 7 }
vRtrPimNgGenEcmpBalanceHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpBalanceHoldTime specifies the hold time
in minutes that applies after an interface has been added to the ECMP
link."
DEFVAL { 1 }
::= { vRtrPimNgGeneralEntry 8 }
vRtrPimNgGenEcmpReBlncInProg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpReBlncInProg indicates whether or not
multicast ECMP rebalancing is currently in progress or not."
::= { vRtrPimNgGeneralEntry 9 }
vRtrPimNgGenEcmpLastReBlncTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpLastReBlncTime indicates the time when
the last rebalancing occurred if the value of
vRtrPimNgGenEcmpReBlncInProg is 'false'."
::= { vRtrPimNgGeneralEntry 10 }
vRtrPimNgGenEcmpRebalanceType OBJECT-TYPE
SYNTAX INTEGER {
triggered (1),
operatorForced (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpRebalanceType indicates the type of ECMP
rebalance."
::= { vRtrPimNgGeneralEntry 11 }
vRtrPimNgGenEcmpOptThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgGenEcmpOptThreshold indicates the optional
threshold value for ECMP balancing.
This object was obsoleted from release 6.0."
::= { vRtrPimNgGeneralEntry 12 }
vRtrPimNgGenEcmpNextBalanceTime OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpNextBalanceTime indicates how much time
is remaining until the next rebalance would occur."
::= { vRtrPimNgGeneralEntry 13 }
vRtrPimNgGenLagUsageOptimize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenLagUsageOptimize specifies whether the router
should optimize usage of the LAG such that traffic for a given
multicast stream destined to an IP interface using the LAG is sent
only to the forwarding complex that owns the LAG link on which it will
actually be forwarded.
If this optimization is turned off, the traffic will be sent to all
the forwarding complexes that own at least one link in the LAG.
Changing the value of this object causes the PIM protocol to be
restarted."
DEFVAL { false }
::= { vRtrPimNgGeneralEntry 14 }
vRtrPimNgGenEcmpHashingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpHashingEnabled specifies whether or not
the multicast balancing of traffic over ECMP links is hash based.
If vRtrPimNgGenEcmpHashingEnabled is 'true' then the multicast
balancing of traffic over ECMP links is done based on Upstream
Multicast Hop(UMH) algorithm.
The value of vRtrPimNgGenEcmpHashingEnabled is mutually exclusive with
the value of vRtrPimNgGenEcmpBalance in the same context.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of vRtrPimNgGenEcmpHashingEnabled to 'true' when the
value of vRtrPimNgGenEcmpBalance is set to 'true'."
DEFVAL { false }
::= { vRtrPimNgGeneralEntry 15 }
vRtrPimNgGenEnableMdtSpt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEnableMdtSpt specifies whether or not
Shortest Path Tree(SPT) switchover is enabled for the default
Multicast Data Tunnel(MDT). If set to 'true' then SPT switchover is
enabled and if set to 'false' SPT switchover is disabled.
Additionally, whenever we change the value of
'vRtrPimNgGenEnableMdtSpt', the PIM instance must reset all MDTs and
reinitiate setup."
DEFVAL { false }
::= { vRtrPimNgGeneralEntry 16 }
vRtrPimNgGenRpfVectorFlags OBJECT-TYPE
SYNTAX BITS {
mvpn (0),
core (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenRpfVectorFlags specifies whether proxy RPF
vectors are used for inter-AS Rosen MVPN.
RPF vectors can be used to propagate SG joins in inter-AS Rosen MVPN
options B and C."
DEFVAL { {} }
::= { vRtrPimNgGeneralEntry 17 }
vRtrPimNgGenEcmpHashRebalance OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenEcmpHashRebalance specifies whether the
multicast balancing of the ECMP links which is hash based is triggered
when a source is added.
If vRtrPimNgGenEcmpHashRebalance is 'false' then the multicast
balancing of traffic over ECMP links is done after nexthop change
event for individual Source address."
DEFVAL { false }
::= { vRtrPimNgGeneralEntry 18 }
vRtrPimNgGenMultiStreamSpmsi OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenMultiStreamSpmsi specifies whether
multistream SPMSI is configured on this router."
::= { vRtrPimNgGeneralEntry 19 }
vRtrPimNgGenBgpNhOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenBgpNhOverride specifies whether vrf-import
extended community should be applied or not."
DEFVAL { false }
::= { vRtrPimNgGeneralEntry 20 }
vRtrPimNgGenPimSsmScaling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenPimSsmScaling specifies whether pim ssm
scaling should be applied or not."
DEFVAL { false }
::= { vRtrPimNgGeneralEntry 21 }
vRtrPimNgGenMtuOverHead OBJECT-TYPE
SYNTAX Integer32 (0 | 44 | 76 | 140 | 268 | 536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenMtuOverHead specifies mtu size to be
accounted for the PIM control packets sent over BIER tunnels."
DEFVAL { 0 }
::= { vRtrPimNgGeneralEntry 22 }
vRtrPimNgAFGenTableLstChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenTableLstChanged indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrPimNgAFGenTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 3 }
vRtrPimNgAFGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgAFGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrPimNgAFGenTable contains objects for general control and
management of the PIM protocol instance within a virtual router."
::= { vRtrPimNgProtocolObjs 4 }
vRtrPimNgAFGenEntry OBJECT-TYPE
SYNTAX VRtrPimNgAFGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of the PIM protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is
set to 'create'. The entry is destroyed when vRtrPimStatus is set
to 'delete'"
INDEX {
vRtrID,
vRtrPimNgAFGenAFType
}
::= { vRtrPimNgAFGenTable 1 }
VRtrPimNgAFGenEntry ::= SEQUENCE
{
vRtrPimNgAFGenAFType TmnxMulticastAddrFamily,
vRtrPimNgAFGenAdminState TmnxAdminState,
vRtrPimNgAFGenOperState TmnxOperState,
vRtrPimNgAFGenCBSRPriority Integer32,
vRtrPimNgAFGenCBSRAddressType InetAddressType,
vRtrPimNgAFGenCBSRAddress InetAddress,
vRtrPimNgAFGenCBSRAdminState TmnxAdminState,
vRtrPimNgAFGenCBSROperState TmnxOperState,
vRtrPimNgAFGenBSRAddressType InetAddressType,
vRtrPimNgAFGenBSRAddress InetAddress,
vRtrPimNgAFGenBSRPriority Integer32,
vRtrPimNgAFGenBSRExpiryTime Unsigned32,
vRtrPimNgAFGenBSRState INTEGER,
vRtrPimNgAFGenBSRUpTime Unsigned32,
vRtrPimNgAFGenCRPAddressType InetAddressType,
vRtrPimNgAFGenCRPAddress InetAddress,
vRtrPimNgAFGenCRPAdminState TmnxAdminState,
vRtrPimNgAFGenCRPOperState TmnxOperState,
vRtrPimNgAFGenCRPHoldtime Integer32,
vRtrPimNgAFGenCRPPriority Integer32,
vRtrPimNgAFGenMdtDefGrpAddrType InetAddressType,
vRtrPimNgAFGenMdtDefGrpAddress InetAddress,
vRtrPimNgAFGenMTIfIndex InterfaceIndexOrZero,
vRtrPimNgAFGenCBSRHashMaskLen Integer32,
vRtrPimNgAFGenBSRHashMaskLen Integer32,
vRtrPimNgAFGenBSRRpfIfIndex InterfaceIndexOrZero,
vRtrPimNgAFGenRpfLookupSequence INTEGER,
vRtrPimNgAFGenMdtDataPrefixType InetAddressType,
vRtrPimNgAFGenMdtDataPrefix InetAddress,
vRtrPimNgAFGenMdtDataPrefixMask InetAddressPrefixLength,
vRtrPimNgAFGenMdtDataDlayIntrvl Unsigned32,
vRtrPimNgAFGenMdtDataJoinTlvPck TruthValue,
vRtrPimNgAFGenRowLastChanged TimeStamp,
vRtrPimNgAFGenERP TruthValue,
vRtrPimNgAFGenERPAdminState TmnxAdminState,
vRtrPimNgAFGenMvpnAutoDiscovery TruthValue,
vRtrPimNgAFGenMvpnCMcastSignal INTEGER,
vRtrPimNgAFGenMvpnGrpAddrMode INTEGER,
vRtrPimNgAFGenMvpnSpmsiAutoDisc TruthValue,
vRtrPimNgAFGenMvpnUMHSelection INTEGER,
vRtrPimNgAFGenMvpnIntersiteShrd TmnxEnabledDisabled,
vRtrPimNgAFGenSSMDefRangeDisabl TruthValue,
vRtrPimNgAFGenMvpnAD INTEGER,
vRtrPimNgAFGenMdtDataGrpAddrMode INTEGER,
vRtrPimNgAFGenEnableAsmDataMdt TruthValue,
vRtrPimNgAfGenAutoRPDiscovery TruthValue,
vRtrPimNgAfGenSSMAsrtCompMode TruthValue,
vRtrPimNgAfGenMdtType INTEGER,
vRtrPimNgAfGenMcastFastFailover TruthValue,
vRtrPimNgAFGenSourceAddressType InetAddressType,
vRtrPimNgAFGenSourceAddress InetAddress,
vRtrPimNgAFGenGrpPrefixAny TruthValue,
vRtrPimNgAfGenMvpnPersistSA TruthValue,
vRtrPimNgAfGenUnicastRtRemoval TruthValue,
vRtrPimNgAFGenMvpnOperCMcastSig INTEGER,
vRtrPimNgAfGenAutoRPCandidate TruthValue,
vRtrPimNgAfGenAutoRPMappingAgent TruthValue,
vRtrPimNgAfGenAutoRPMAIUAddrType InetAddressType,
vRtrPimNgAfGenAutoRPMAIUAddress InetAddress
}
vRtrPimNgAFGenAFType OBJECT-TYPE
SYNTAX TmnxMulticastAddrFamily
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenAFType indicates the address family type
supported by the PIM on this instance of router."
::= { vRtrPimNgAFGenEntry 1 }
vRtrPimNgAFGenAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenAdminState specifies the current
administrative state of this PIM protocol instance associated with
this address family on this virtual router."
DEFVAL { outOfService }
::= { vRtrPimNgAFGenEntry 2 }
vRtrPimNgAFGenOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenOperState indicates the current operating
state of this PIM protocol instance associated with this address
family on this router."
::= { vRtrPimNgAFGenEntry 3 }
vRtrPimNgAFGenCBSRPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCBSRPriority specifies whether the router
is eligible to be a bootstrap router. If the value of this object is
set to zero, the router does not participate in the bootstrap
election. The highest priority is 255."
DEFVAL { 0 }
::= { vRtrPimNgAFGenEntry 4 }
vRtrPimNgAFGenCBSRAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCBSRAddressType specifies the type of
address of the Candidate Bootstrap Router(CBSR)."
::= { vRtrPimNgAFGenEntry 5 }
vRtrPimNgAFGenCBSRAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCBSRAddress specifies the type of address
of the Candidate Bootstrap Router(CBSR).
To participate in the bootstrap election, the router sends bootstrap
messages(BSM). These messages carry the BSR address of the router."
::= { vRtrPimNgAFGenEntry 6 }
vRtrPimNgAFGenCBSRAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCBSRAdminState is used to administratively
enable or disable participating in the Bootstrap election.
Even if the value of this object is set to 'inService', if the
vRtrPimNgAFGenCBSRAddress is not set or vRtrPimNgAFGenCBSRPriority is
zero, bootstrap messages will not be sent."
DEFVAL { outOfService }
::= { vRtrPimNgAFGenEntry 7 }
vRtrPimNgAFGenCBSROperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCBSROperState indicates the operational
status of the Bootstrap mechanism.
If the value of vRtrPimNgAFGenCBSROperState is 'outOfService', it
could be because the router interface corresponding to
vRtrPimNgAFGenCBSRAddress is down or PIM is not enabled on that
interface or vRtrPimNgAFGenCBSRPriority is zero."
::= { vRtrPimNgAFGenEntry 8 }
vRtrPimNgAFGenBSRAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRAddressType indicates the type of
address of the elected bootstrap router."
::= { vRtrPimNgAFGenEntry 9 }
vRtrPimNgAFGenBSRAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRAddress indicates the address of the
elected bootstrap router."
::= { vRtrPimNgAFGenEntry 10 }
vRtrPimNgAFGenBSRPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRPriority indicates the priority of the
elected bootstrap router. Higher value means higher priority."
::= { vRtrPimNgAFGenEntry 11 }
vRtrPimNgAFGenBSRExpiryTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRExpiryTime indicates the minimum time
remaining before the elected bootstrap router will be declared down if
the value of vRtrPimNgAFGenBSRState is not 'electedBSR'.
The value of vRtrPimNgAFGenBSRExpiryTime indicates the time remaining
before the router sends the next Bootstrap Message(BSM) if the value
of vRtrPimNgAFGenBSRState is 'electedBSR'."
::= { vRtrPimNgAFGenEntry 12 }
vRtrPimNgAFGenBSRState OBJECT-TYPE
SYNTAX INTEGER {
none (0),
candidateBSR (1),
pendingBSR (2),
electedBSR (3),
acceptAny (4),
acceptPreferred (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRState indicates the state of the router
with respect to the bootstrap mechanism.
'candidateBSR', 'pendingBSR' and 'electedBSR' are the states of the
router participating in the Bootstrap election.
'acceptAny' and 'acceptPreferred' are the states of the router not
participating in the Bootstrap election."
::= { vRtrPimNgAFGenEntry 13 }
vRtrPimNgAFGenBSRUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRUpTime indicates the time since the
current E-BSR became the elected BSR."
::= { vRtrPimNgAFGenEntry 14 }
vRtrPimNgAFGenCRPAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCRPAddressType specifies the type of
address of the local RP address."
::= { vRtrPimNgAFGenEntry 15 }
vRtrPimNgAFGenCRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCRPAddress specifies the local RP address.
This address is sent in the C-RP Advertisements to the bootstrap
router."
::= { vRtrPimNgAFGenEntry 16 }
vRtrPimNgAFGenCRPAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCRPAdminState specifies whether to enable
or disable sending C-RP Advertisements to the BSR administratively.
Even if the value of the object is set to 'inService', if the
vRtrPimNgAFGenCRPAddress is not set, C-RP messages will not be sent to
the bootstrap router."
DEFVAL { outOfService }
::= { vRtrPimNgAFGenEntry 17 }
vRtrPimNgAFGenCRPOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCRPOperState indicates the operational
status of the C-RP mechanism. If the router is sending C-RP-Adv
messages, the value of this object will be 'inService'."
::= { vRtrPimNgAFGenEntry 18 }
vRtrPimNgAFGenCRPHoldtime OBJECT-TYPE
SYNTAX Integer32 (5..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCRPHoldtime specifies the hold time of the
candidate RP. It is used by the bootstrap router to timeout the RP
entries if it does not listen to another C-RP advertisement within the
holdtime period."
DEFVAL { 150 }
::= { vRtrPimNgAFGenEntry 19 }
vRtrPimNgAFGenCRPPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCRPPriority specifies the router's priority
for becoming a rendezvous point (RP).
This value is used to elect RP for a group range. A value of 0 is
considered as the highest priority."
DEFVAL { 192 }
::= { vRtrPimNgAFGenEntry 20 }
vRtrPimNgAFGenMdtDefGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDefGrpAddrType specifies the type of
default core group address of the Multicast Distribution Tree(MDT) for
the VPRN instance."
::= { vRtrPimNgAFGenEntry 21 }
vRtrPimNgAFGenMdtDefGrpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDefGrpAddress specifies the default core
group address of the Multicast Distribution Tree(MDT) for the VPRN
instance.
All the customer PIM control is sent in the service provider network
using the default group address. Customer data traffic for which
a Data MDT is not used is also sent on the default tunnel. The
Multicast Tunnel(MT) interface for a VPRN is created when this object
is set to a valid group address. The MT interface is deleted when the
object is reset to its default value.
The value of this object is not applicable when the value of
vRtrPimNgAFGenMvpnGrpAddrMode is set to 'none'."
::= { vRtrPimNgAFGenEntry 22 }
vRtrPimNgAFGenMTIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMTIfIndex indicates the interface index of
the Multicast Tunnel(MT) interface. MT interface is created when
vRtrPimNgAFGenMdtDefGrpAddress is configured with the default core
group address."
::= { vRtrPimNgAFGenEntry 23 }
vRtrPimNgAFGenCBSRHashMaskLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenCBSRHashMaskLen specifies the length of a
mask that is to be ANDed with the group address before the hash
function is called. All groups with the same hash map to the same RP.
For example, if this value is 24, only the first 24 bits of the group
addresses matter. This mechanism is used to map one group or multiple
groups to a RP.
Default values are 30 and 126 for ipv4 and ipv6 group addresses
respectively."
DEFVAL { 30 }
::= { vRtrPimNgAFGenEntry 24 }
vRtrPimNgAFGenBSRHashMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRHashMaskLen indicates the hash mask
length of the elected BSR."
::= { vRtrPimNgAFGenEntry 25 }
vRtrPimNgAFGenBSRRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenBSRRpfIfIndex indicates the RPF interface
towards the elected BSR. The value of this object will be zero if
there is no elected BSR in the network."
::= { vRtrPimNgAFGenEntry 26 }
vRtrPimNgAFGenRpfLookupSequence OBJECT-TYPE
SYNTAX INTEGER {
mucastRouteTable (0),
ucastRouteTable (1),
both (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenRpfLookupSequence specifies the sequence of
route tables that PIM uses for finding a Reverse Path Forwarding(RPF)
interface for a particular multicast route.
'mucastRouteTable' is the unicast route table to be used only by
multicast protocols(PIM) which will contain routes submitted by
multi-protocol BGP, ISIS and OSPF.
'ucastRouteTable' is the regular unicast route table which will
contain routes submitted by all the unicast routing protocols. By
default, only the 'ucastRouteTable' is looked up by PIM for
calculating RPF interface towards the source or rendezvous point.
However the operator can specify the following: a) Use unicast route
table only b) Use multicast unicast route table only or c) Use both
the route tables.
In case of (c), PIM will always lookup first in the 'mucastRouteTable'
and if there is a route, it will use it. If PIM does not find a route
in the first lookup, it will try to find it in the 'ucastRouteTable'."
DEFVAL { ucastRouteTable }
::= { vRtrPimNgAFGenEntry 27 }
vRtrPimNgAFGenMdtDataPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDataPrefixType specifies the address
type of vRtrPimNgAFGenMdtDataPrefix address."
DEFVAL { unknown }
::= { vRtrPimNgAFGenEntry 28 }
vRtrPimNgAFGenMdtDataPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDataPrefix specifies the address used to
configure the pool of multicast addresses in the service provider
instance that can be used to generate data only 'Multicast
Distribution Tree'(MDT) tunnels.
A Service Provider(SP) determines whether a particular VPN is
multicast-enabled. If it is, it corresponds to a 'Multicast
Domain'(MD). For each Multicast Domain, there is a default MDT through
the backbone, connecting all of the PEs that belong to that MD.
The configured prefix determines the maximum number of data MDT
tunnels that can be generated for the VPRN. Once this pool is
exhausted, additional (VPN-S,G) are bound to one of the in-use data
MDTs i.e. there could be multiple (VPN-S,G) entries bound to the same
data MDT when we exhaust this pool.
The value of this object is not applicable when the value of
vRtrPimNgAFGenMdtDataGrpAddrMode is set to 'none'."
::= { vRtrPimNgAFGenEntry 29 }
vRtrPimNgAFGenMdtDataPrefixMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDataPrefixMask specifies the IP address
prefix used to configure the group address
vRtrPimNgAFGenMdtDataPrefix."
DEFVAL { 0 }
::= { vRtrPimNgAFGenEntry 30 }
vRtrPimNgAFGenMdtDataDlayIntrvl OBJECT-TYPE
SYNTAX Unsigned32 (3..180)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDataDlayIntrvl specifies the interval
before the Provider Edge(PE) router connected to the source switches
traffic from default Multicast Distribution Tree(MDT) to the Data MDT
group. The default value is 3 seconds."
DEFVAL { 3 }
::= { vRtrPimNgAFGenEntry 31 }
vRtrPimNgAFGenMdtDataJoinTlvPck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDataJoinTlvPck specifies if packing of
MDT Join TLVs is enabled. If multiple Join TLVs are available at the
time they are transmitted, the TLVs are packed into a single UDP PDU
instead of sending each one in a separate UDP PDU. In scaling
scenarios, this packing makes more efficient use of packet buffers and
helps in better convergence. The default value is 'true'."
DEFVAL { true }
::= { vRtrPimNgAFGenEntry 32 }
vRtrPimNgAFGenRowLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenRowLastChanged indicates the sysUpTime when
this row was last modified."
::= { vRtrPimNgAFGenEntry 33 }
vRtrPimNgAFGenERP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenERP specifies if multicast messages
are checked for embedded RP information. When vRtrPimNgAFGenERP
has a value of 'true', embedded RP is enabled and users can
configure group ranges where embedded RP information will be used.
When the value of vRtrPimNgAFGenERP is set to 'false', embedded RP is
disabled, administratively shutdown and user configured group ranges
(entries in vRtrPimNgERPGrpPrefixTable) will be deleted."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 34 }
vRtrPimNgAFGenERPAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenERPAdminState specifies whether to
administratively enable or disable checking messages for embedded RP
information.
Value of vRtrPimNgAFGenERPAdminState is set to 'outOfService' when the
value of vRtrPimNgAFGenERP is set to 'false'."
DEFVAL { outOfService }
::= { vRtrPimNgAFGenEntry 35 }
vRtrPimNgAFGenMvpnAutoDiscovery OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnAutoDiscovery specifies if
auto-discovery via BGP is enabled. When auto-discovery is enabled, PIM
peering on the inclusive provider tunnel is disabled.
This object is obsoleted and replaced with vRtrPimNgAFGenMvpnAD object
in 9.0 Release."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 36 }
vRtrPimNgAFGenMvpnCMcastSignal OBJECT-TYPE
SYNTAX INTEGER {
bgp (0),
pim (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnCMcastSignal specifies which protocol
to use, BGP or PIM, for PE-to-PE signaling of CE multicast states.
When vRtrPimNgAFGenMvpnCMcastSignal is set to 'pim' and neighbor
discovery via BGP is disabled, PIM peering will be enabled on the
inclusive tree."
DEFVAL { pim }
::= { vRtrPimNgAFGenEntry 37 }
vRtrPimNgAFGenMvpnGrpAddrMode OBJECT-TYPE
SYNTAX INTEGER {
none (0),
asm (1),
ssm (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnGrpAddrMode specifies which PIM mode to
use, ASM or SSM, for PIM based inclusive provider tunnels."
DEFVAL { asm }
::= { vRtrPimNgAFGenEntry 38 }
vRtrPimNgAFGenMvpnSpmsiAutoDisc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnSpmsiAutoDisc specifies if
auto-discovery-disable via BGP is disabled.
When the value of vRtrPimNgAFGenMvpnSpmsiAutoDisc is set to 'true',
then C-trees to P-tunnels binding auto-discovery via BGP is disabled
and it is signaled using PIM join TLVs."
DEFVAL { true }
::= { vRtrPimNgAFGenEntry 39 }
vRtrPimNgAFGenMvpnUMHSelection OBJECT-TYPE
SYNTAX INTEGER {
highestip (0),
hashbased (1),
tunnelstatus (2),
unicastRtPref (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnUMHSelection specifies the selection
mechanism to use for selecting Upstream Multicast Hop(UMH).
When the value of vRtrPimNgAFGenMvpnUMHSelection is set to 'highestip',
the highest IP Address is selected as UMH. When the value is set to
'hashbased', UMH selection is based on the hash based procedures. When
the value is set to 'tunnelstatus', UMH selection is based on the
state of the tunnel as well as the available unicast routes through the
tunnel. When the value is set to 'unicastRtPref', UMH selection is
based on the best unicast route.
UMH selection is supported only with RSVP-TE PMSI. Its value cannot be
modified without shutting down the MVPN instance."
DEFVAL { highestip }
::= { vRtrPimNgAFGenEntry 40 }
vRtrPimNgAFGenMvpnIntersiteShrd OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnIntersiteShrd specifies whether to use
inter-site shared C-trees or not.
When the value of vRtrPimNgAFGenMvpnIntersiteShrd is set to 'enabled',
the use of inter-site shared C-trees is enabled. When the value is set
to 'disabled', the use of inter-site shared C-trees is disabled."
DEFVAL { enabled }
::= { vRtrPimNgAFGenEntry 41 }
vRtrPimNgAFGenSSMDefRangeDisabl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenSSMDefRangeDisabl specifies whether to
disable the use of default range (232/8) for SSM so that it can be
used by ASM to process (*,G).
When the value of vRtrPimNgAFGenSSMDefRangeDisabl is set to 'true',
the use of default range is disabled for SSM and it can be used by
ASM. When the value is set to 'false', the SSM default range is
enabled."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 42 }
vRtrPimNgAFGenMvpnAD OBJECT-TYPE
SYNTAX INTEGER {
none (0),
default (1),
mdtSafi (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnAD specifies the auto-discovery
mechanism to be used for discovering peers using BGP.
When the value of vRtrPimNgAFGenMvpnAD is set to 'none(0)',
auto-discovery via BGP is disabled. When the value is set to
'default(1)', auto-discovery via BGP is enabled using default IPMSI AD
format. When the value is set to 'mdtSafi(2)', auto-discovery via BGP
is enabled using MDT-SAFI format.
A MDT-SAFI address is a 16-byte value consisting of 12-byte route
distinguisher(RD) followed by a 4-byte group address.
An 'inconsistentValue' error is returned if this object is set to
non-default value, when the value of TIMETRA-VRTR-MIB::vRtrInterASMvpn
is 'true'."
DEFVAL { none }
::= { vRtrPimNgAFGenEntry 43 }
vRtrPimNgAFGenMdtDataGrpAddrMode OBJECT-TYPE
SYNTAX INTEGER {
none (0),
asm (1),
ssm (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMdtDataGrpAddrMode specifies which PIM mode
to use, ASM or SSM, for PIM based selective provider tunnels."
DEFVAL { none }
::= { vRtrPimNgAFGenEntry 44 }
vRtrPimNgAFGenEnableAsmDataMdt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenEnableAsmDataMdt specifies whether RP join
on egress is enabled or not.
When the value of vRtrPimNgAFGenEnableAsmDataMdt is set to 'true' RP
join on egress is enabled. When its value is set to 'false' RP join on
egress is disabled and source join is used.
The value of this object is only applicable when vRtrMvpnIpmsiType is
set to 'pim'."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 45 }
vRtrPimNgAfGenAutoRPDiscovery OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenAutoRPDiscovery specifies whether auto RP
is enabled in discovery mode for this PIM protocol instance."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 46 }
vRtrPimNgAfGenSSMAsrtCompMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenSSMAsrtCompMode specifies whether SSM
assert is enabled in compatibility mode for this PIM protocol
instance.
When the value of the object is set to true, for SSM groups, PIM will
consider the SPT bit to be implicitly set to compute the value of
CouldAssert(S,G,I) as defined in RFC 4601.
When the value of the object is set to false, for SSM groups, PIM will
not assume the SPT bit to be set. The SPT bit will be set by
Update_SPTbit(S,G,iif) macro defined in RFC 4601."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 47 }
vRtrPimNgAfGenMdtType OBJECT-TYPE
SYNTAX INTEGER {
senderOnly (0),
receiverOnly (1),
senderReceiver (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The value of vRtrPimNgAfGenMdtType specifies whether the PE node is a
sender, receiver or both.
When the value of vRtrPimNgAfGenMdtType is set to 'receiverOnly', a
receiver PE would not initiate and setup P2MP I/S-PMSI that is
originating locally.
When the value of vRtrPimNgAfGenMdtType is set to 'senderOnly', PE
would initiate and setup P2MP I-PMSI towards other receiver PE nodes.
With 'senderOnly' mode, PE node will setup S-PMSI based on the
configured threshold."
DEFVAL { senderReceiver }
::= { vRtrPimNgAFGenEntry 48 }
vRtrPimNgAfGenMcastFastFailover OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenMcastFastFailover specifies whether
multicast fast failover is enabled for this PIM protocol instance."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 49 }
vRtrPimNgAFGenSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenSourceAddressType specifies the address
type of vRtrPimNgAFGenSourceAddress address."
DEFVAL { unknown }
::= { vRtrPimNgAFGenEntry 50 }
vRtrPimNgAFGenSourceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenSourceAddress specifies the source IP
address to use in MVPN PIM signaling."
DEFVAL { ''H }
::= { vRtrPimNgAFGenEntry 51 }
vRtrPimNgAFGenGrpPrefixAny OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenGrpPrefixAny specifies whether join
requests received by the MVPN, will be redirected to base instance or
not.
If the value of vRtrPimNgAFGenGrpPrefixAny is set to 'true' then the
join requests are redirected to the base instance without any
additional checks."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 52 }
vRtrPimNgAfGenMvpnPersistSA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenMvpnPersistSA specifies whether the RP will
keep advertising the source active route (SA).
If the value of vRtrPimNgAfGenMvpnPersistSA is set to 'true', it will
force the RP to send the SA on getting a register pdu from the source
and RP will not withdraw that SA as long as the null register timer is
running."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 53 }
vRtrPimNgAfGenUnicastRtRemoval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenUnicastRtRemoval specifies whether to
withdraw Type 5 routes or not.
If the value of vRtrPimNgAfGenUnicastRtRemoval is 'true' then the
expiry of KAT timer triggers withdrawal of Type 5 routes. The
withdrawal happens regardless of the value of
vRtrPimNgAfGenMvpnPersistSA."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 54 }
vRtrPimNgAFGenMvpnOperCMcastSig OBJECT-TYPE
SYNTAX INTEGER {
none (0),
bgp (1),
pim (2),
inband (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFGenMvpnOperCMcastSig indicates which protocol
is being used for PE-to-PE signaling of CE multicast states."
::= { vRtrPimNgAFGenEntry 55 }
vRtrPimNgAfGenAutoRPCandidate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenAutoRPCandidate specifies whether auto RP
is enabled to advertise candidate-rp information for this PIM protocol
instance."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 56 }
vRtrPimNgAfGenAutoRPMappingAgent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenAutoRPMappingAgent specifies whether auto
RP is enabled to behave as a mapping-agent for this PIM protocol
instance."
DEFVAL { false }
::= { vRtrPimNgAFGenEntry 57 }
vRtrPimNgAfGenAutoRPMAIUAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenAutoRPMAIUAddrType indicates the type of
mapping-agent address that is in use."
::= { vRtrPimNgAFGenEntry 58 }
vRtrPimNgAfGenAutoRPMAIUAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAfGenAutoRPMAIUAddress indicates the
mapping-agent address that is currently in use."
::= { vRtrPimNgAFGenEntry 59 }
vRtrPimNgStaticRPTableLstChnged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticRPTableLstChnged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgStaticRPTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 5 }
vRtrPimNgStaticRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgStaticRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of statically configured Rendezvous Point
(RP) addresses."
::= { vRtrPimNgProtocolObjs 6 }
vRtrPimNgStaticRPEntry OBJECT-TYPE
SYNTAX VRtrPimNgStaticRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgStaticRPTable represents a statically
configured Rendezvous Point(RP). An entry in this table can be created
or destroyed by an SNMP SET request to vRtrPimNgStaticRPRowStatus."
INDEX {
vRtrID,
vRtrPimNgStaticRPRPAddressType,
vRtrPimNgStaticRPRPAddress
}
::= { vRtrPimNgStaticRPTable 1 }
VRtrPimNgStaticRPEntry ::= SEQUENCE
{
vRtrPimNgStaticRPRPAddressType InetAddressType,
vRtrPimNgStaticRPRPAddress InetAddress,
vRtrPimNgStaticRPRowStatus RowStatus,
vRtrPimNgStaticRPRowLastChanged TimeStamp,
vRtrPimNgStaticRPOverride TruthValue
}
vRtrPimNgStaticRPRPAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticRPRPAddressType indicates the type of
Rendezvous Point (RP) address indicated by vRtrPimNgStaticRPRPAddress."
::= { vRtrPimNgStaticRPEntry 1 }
vRtrPimNgStaticRPRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticRPRPAddress indicates the Rendezvous Point
(RP) address that should be used by the router for the range of
multicast groups."
::= { vRtrPimNgStaticRPEntry 2 }
vRtrPimNgStaticRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticRPRowStatus is used to create or destroy
entries in this table."
::= { vRtrPimNgStaticRPEntry 3 }
vRtrPimNgStaticRPRowLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticRPRowLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgStaticRPEntry 4 }
vRtrPimNgStaticRPOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticRPOverride specifies the override on the
dynamic group-to-RP mappings learned by the router.
When the value of this object is set to 'true', then static
group-to-RP mappings take precedence over the dynamically learned
mappings."
DEFVAL { false }
::= { vRtrPimNgStaticRPEntry 5 }
vRtrPimNgStGrptoRPTableLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgStGrptoRPTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgStGrptoRPTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 7 }
vRtrPimNgStGrptoRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgStGrpToRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of statically configured Rendezvous Point
(RP) addresses for a multicast group range. Entries can be created or
destroyed. If this table does not contain any entries, then the
multicast group to RP mapping is derived from the RP-Set messages
received from the Bootstrap Router. If the vRtrPimNgStaticRPTable does
not contain an entry with the specified vRtrID and
vRtrPimNgStGrptoRPRPAddress, an entry is implicitly created in the
vRtrPimNgStaticRPTable."
::= { vRtrPimNgProtocolObjs 8 }
vRtrPimNgStGrpToRPEntry OBJECT-TYPE
SYNTAX VRtrPimNgStGrpToRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgStGrptoRPTable represents a group-to-RP
mapping which is statically configured. An entry in this table can be
created or destroyed by an SNMP SET request to
vRtrPimNgStGrpToRPRowStatus."
INDEX {
vRtrID,
vRtrPimNgStGrptoRPRPAddrType,
vRtrPimNgStGrptoRPRPAddress,
vRtrPimNgStaticGroupAddrType,
vRtrPimNgStaticGroupAddr,
vRtrPimNgStaticGroupMask
}
::= { vRtrPimNgStGrptoRPTable 1 }
VRtrPimNgStGrpToRPEntry ::= SEQUENCE
{
vRtrPimNgStGrptoRPRPAddrType InetAddressType,
vRtrPimNgStGrptoRPRPAddress InetAddress,
vRtrPimNgStaticGroupAddrType InetAddressType,
vRtrPimNgStaticGroupAddr InetAddress,
vRtrPimNgStaticGroupMask InetAddressPrefixLength,
vRtrPimNgStGrpToRPRowStatus RowStatus,
vRtrPimNgStGrpToRPRowLstChanged TimeStamp
}
vRtrPimNgStGrptoRPRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgStGrptoRPRPAddrType indicates the type of
Rendezvous Point (RP) address that should be used by the router for
the range of multicast groups."
::= { vRtrPimNgStGrpToRPEntry 1 }
vRtrPimNgStGrptoRPRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgStGrptoRPRPAddress indicates the Rendezvous
Point (RP) address that should be used by the router for the range of
multicast groups."
::= { vRtrPimNgStGrpToRPEntry 2 }
vRtrPimNgStaticGroupAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticGroupAddrType indicates the type of
address indicated by vRtrPimNgStaticGroupAddr."
::= { vRtrPimNgStGrpToRPEntry 3 }
vRtrPimNgStaticGroupAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticGroupAddr combined with the value of
vRtrPimNgStaticGroupMask indicates the range of multicast group
addresses for which vRtrPimNgStGrptoRPRPAddress is the Rendezvous
Point (RP)."
::= { vRtrPimNgStGrpToRPEntry 4 }
vRtrPimNgStaticGroupMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgStaticGroupMask indicates the mask which is
combined with vRtrPimNgStaticGroupAddr to get the range of multicast
group addresses for which vRtrPimNgStGrptoRPRPAddress should be used
by the router as the Rendezvous Point (RP)."
::= { vRtrPimNgStGrpToRPEntry 5 }
vRtrPimNgStGrpToRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgStGrpToRPRowStatus is used to create or destroy
entries in this table."
::= { vRtrPimNgStGrpToRPEntry 6 }
vRtrPimNgStGrpToRPRowLstChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgStGrpToRPRowLstChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgStGrpToRPEntry 7 }
vRtrPimNgGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast sources corresponding to the IP
multicast groups. This table represents the global PIM source, group
database."
::= { vRtrPimNgProtocolObjs 9 }
vRtrPimNgGrpSrcEntry OBJECT-TYPE
SYNTAX VRtrPimNgGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgGrpSrcTable. Each entry represents a source
address from which receivers are interested or not interested in
receiving multicast traffic."
INDEX {
vRtrID,
vRtrPimNgGrpSrcGrpAddrType,
vRtrPimNgGrpSrcGroupAddress,
vRtrPimNgGrpSrcSrcAddrType,
vRtrPimNgGrpSrcSourceAddress
}
::= { vRtrPimNgGrpSrcTable 1 }
VRtrPimNgGrpSrcEntry ::= SEQUENCE
{
vRtrPimNgGrpSrcGrpAddrType InetAddressType,
vRtrPimNgGrpSrcGroupAddress InetAddress,
vRtrPimNgGrpSrcSrcAddrType InetAddressType,
vRtrPimNgGrpSrcSourceAddress InetAddress,
vRtrPimNgGrpSrcType INTEGER,
vRtrPimNgGrpSrcRPAddrType InetAddressType,
vRtrPimNgGrpSrcRPAddr InetAddress,
vRtrPimNgGrpSrcRpfNbrAddrType InetAddressType,
vRtrPimNgGrpSrcRpfNbrAddr InetAddress,
vRtrPimNgGrpSrcRpfIfIndex InterfaceIndexOrZero,
vRtrPimNgGrpSrcRptRpfNbrAdrType InetAddressType,
vRtrPimNgGrpSrcRptRpfNbrAddr InetAddress,
vRtrPimNgGrpSrcMRIBNHopAddrType InetAddressType,
vRtrPimNgGrpSrcMRIBNextHopAddr InetAddress,
vRtrPimNgGrpSrcMRIBSrcFlags BITS,
vRtrPimNgGrpSrcFlags BITS,
vRtrPimNgGrpSrcUpstreamJpState INTEGER,
vRtrPimNgGrpSrcUpstreamJpTimer Unsigned32,
vRtrPimNgGrpSrcUstrmRptJpState INTEGER,
vRtrPimNgGrpSrcUstrmRptOvrdeTmr Unsigned32,
vRtrPimNgGrpSrcRegisterState INTEGER,
vRtrPimNgGrpSrcRegisterStopTmr Unsigned32,
vRtrPimNgGrpSrcKeepaliveTimer Unsigned32,
vRtrPimNgGrpSrcNumImmediateOif Gauge32,
vRtrPimNgGrpSrcNumInheritedOif Gauge32,
vRtrPimNgGrpSrcNumInherRptOif Gauge32,
vRtrPimNgGrpSrcNumLclRxInclIf Gauge32,
vRtrPimNgGrpSrcNumLclRxExclIf Gauge32,
vRtrPimNgGrpSrcNumJoinPruneIf Gauge32,
vRtrPimNgGrpSrcNumLostAssertIf Gauge32,
vRtrPimNgGrpSrcUpTime Unsigned32,
vRtrPimNgGrpSrcNumSGRptPruneOif Gauge32,
vRtrPimNgGrpSrcRxRegFrmAnycstRP TruthValue,
vRtrPimNgGrpSrcRslvdByRtTblType INTEGER,
vRtrPimNgGrpSrcCurrFwdingRate Counter32,
vRtrPimNgGrpSrcCurrFwdingOFRate Counter32,
vRtrPimNgGrpSrcCurrFwdingHCRate Counter64,
vRtrPimNgGrpSrcGrpSptThreshold Unsigned32,
vRtrPimNgGrpSrcGrpAdminBw Gauge32,
vRtrPimNgGrpSrcGrpEcmpOptThresh Unsigned32,
vRtrPimNgGrpSrcSpmsiRpfIfIndex InterfaceIndexOrZero,
vRtrPimNgGrpSrcRpfSecNbrAddrTyp InetAddressType,
vRtrPimNgGrpSrcRpfSecNbrAddr InetAddress,
vRtrPimNgGrpSrcRpfSecIfIndex InterfaceIndexOrZero,
vRtrPimNgGrpSrcAdvtAddrType InetAddressType,
vRtrPimNgGrpSrcAdvtAddr InetAddress,
vRtrPimNgGrpSrcStdbyMRIBSrcFlags BITS,
vRtrPimNgGrpSrcStdbyUpJpState INTEGER,
vRtrPimNgGrpSrcStdbyUpJpTimer Unsigned32,
vRtrPimNgGrpSrcDSRpfvNbrType InetAddressType,
vRtrPimNgGrpSrcDSRpfvNbr InetAddress,
vRtrPimNgGrpSrcDSRpfvProxyType InetAddressType,
vRtrPimNgGrpSrcDSRpfvProxy InetAddress,
vRtrPimNgGrpSrcDSRpfvRD TmnxVPNRouteDistinguisher,
vRtrPimNgGrpSrcDSRpfvType INTEGER,
vRtrPimNgGrpSrcUPRpfvNbrType InetAddressType,
vRtrPimNgGrpSrcUPRpfvNbr InetAddress,
vRtrPimNgGrpSrcUPRpfvProxyType InetAddressType,
vRtrPimNgGrpSrcUPRpfvProxy InetAddress,
vRtrPimNgGrpSrcUPRpfvRD TmnxVPNRouteDistinguisher,
vRtrPimNgGrpSrcUPRpfvType INTEGER,
vRtrPimNgGrpSrcRpfvFlags BITS,
vRtrPimNgGrpSrcState INTEGER,
vRtrPimNgGrpSrcMode INTEGER,
vRtrPimNgGrpSrcPruneLimitTimer Unsigned32,
vRtrPimNgGrpSrcGraftRetryTimer Unsigned32
}
vRtrPimNgGrpSrcGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGrpAddrType indicates the type of IP
multicast group address represented by vRtrPimNgGrpSrcGroupAddress."
::= { vRtrPimNgGrpSrcEntry 1 }
vRtrPimNgGrpSrcGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGroupAddress indicates the IP multicast
group address for which this entry contains information. If the
vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will be
zero and vRtrPimNgGrpSrcSourceAddress will contain the address of the
RP."
::= { vRtrPimNgGrpSrcEntry 2 }
vRtrPimNgGrpSrcSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcSrcAddrType indicates the type of IP
multicast source address represented by vRtrPimNgGrpSrcSourceAddress."
::= { vRtrPimNgGrpSrcEntry 3 }
vRtrPimNgGrpSrcSourceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcSourceAddress indicates the source address
for which this entry contains information. If vRtrPimNgGrpSrcType is
'starG', the value of this object will be zero. If vRtrPimNgGrpSrcType
is 'starstarRP', the value of this object will be address of the RP."
::= { vRtrPimNgGrpSrcEntry 4 }
vRtrPimNgGrpSrcType OBJECT-TYPE
SYNTAX INTEGER {
starStarRP (0),
starG (1),
sg (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcType indicates the type of this entry."
::= { vRtrPimNgGrpSrcEntry 5 }
vRtrPimNgGrpSrcRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRPAddrType indicates the type of address
of the Rendezvous Point(RP)."
::= { vRtrPimNgGrpSrcEntry 6 }
vRtrPimNgGrpSrcRPAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRPAddr indicates the address of the
Rendezvous Point(RP)."
::= { vRtrPimNgGrpSrcEntry 7 }
vRtrPimNgGrpSrcRpfNbrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRpfNbrAddrType indicates the type of the
address of the RPF neighbor."
::= { vRtrPimNgGrpSrcEntry 8 }
vRtrPimNgGrpSrcRpfNbrAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRpfNbrAddr indicates the address of the
RPF neighbor."
::= { vRtrPimNgGrpSrcEntry 9 }
vRtrPimNgGrpSrcRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRpfIfIndex indicates the router's
interface index on which the RPF neighbor exists."
::= { vRtrPimNgGrpSrcEntry 10 }
vRtrPimNgGrpSrcRptRpfNbrAdrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRptRpfNbrAdrType indicates the type of
address of the RPF neighbor on the RPT."
::= { vRtrPimNgGrpSrcEntry 11 }
vRtrPimNgGrpSrcRptRpfNbrAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRptRpfNbrAddr indicates the address of the
RPF neighbor on the RPT."
::= { vRtrPimNgGrpSrcEntry 12 }
vRtrPimNgGrpSrcMRIBNHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcMRIBNHopAddrType indicates the type of
next hop address towards the RP."
::= { vRtrPimNgGrpSrcEntry 13 }
vRtrPimNgGrpSrcMRIBNextHopAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcMRIBNextHopAddr indicates the next hop
address towards the RP."
::= { vRtrPimNgGrpSrcEntry 14 }
vRtrPimNgGrpSrcMRIBSrcFlags OBJECT-TYPE
SYNTAX BITS {
self (0),
direct (1),
remote (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcMRIBSrcFlags indicates the MRIB
information about the source. If the entry is of type 'starG' or
'starStarRP', it will contain information about the RP for this group."
::= { vRtrPimNgGrpSrcEntry 15 }
vRtrPimNgGrpSrcFlags OBJECT-TYPE
SYNTAX BITS {
sptBit (0),
rptPruneDesired (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcFlags contains information about the state
of the entry.
This object is applicable only for (S,G) entries,i.e., when
vRtrPimNgGrpSrcType is 'sg'.
The (S,G) sptBit is used to distinguish whether to forward on (*,*,RP)
or (*,G) or on (S,G) state. It is updated when the (S,G) data comes on
the RPF interface towards the source. 'rptPruneDesired' is set
according to the PruneDesired(S,G,rpt) algorithm."
::= { vRtrPimNgGrpSrcEntry 16 }
vRtrPimNgGrpSrcUpstreamJpState OBJECT-TYPE
SYNTAX INTEGER {
notJoined (0),
joined (1),
pruned (2),
forwarding (3),
ackPending (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUpstreamJpState indicates the upstream
Join-Prune state. This is a result of sending PIM Join-Prune messages
towards the source or the RP."
::= { vRtrPimNgGrpSrcEntry 17 }
vRtrPimNgGrpSrcUpstreamJpTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUpstreamJpTimer indicates the time
remaining before the router sends another Join message to it's
upstream neighbor."
::= { vRtrPimNgGrpSrcEntry 18 }
vRtrPimNgGrpSrcUstrmRptJpState OBJECT-TYPE
SYNTAX INTEGER {
notJoinedStarG (0),
notPruned (1),
pruned (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUstrmRptJpState indicates the upstream RPT
Join-Prune state. (S,G,rpt) Joins and Prunes are (S,G) Joins or Prunes
sent on the RP tree with the RPT bit set, either to modify the results
of (*,G) Joins, or to override the behavior of other upstream LAN
peers."
::= { vRtrPimNgGrpSrcEntry 19 }
vRtrPimNgGrpSrcUstrmRptOvrdeTmr OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUstrmRptOvrdeTmr indicates the delay to
triggered Join(S,G,rpt) messages to prevent implosions of triggered
messages.
If vRtrPimNgGrpSrcUstrmRptOvrdeTmr has a non-zero value, it means that
the router was in 'notPruned' state and it saw a Prune(S,G,rpt)
message being sent to RPF'(S,G,rpt).
If the router sees a Join(S,G,rpt) override message being sent by some
other router on the LAN while the timer is still non-zero, it simply
cancels the override timer. If it does not see a Join(S,G,rpt)
message, then on expiry of the override timer, it sends it's own
Join(S,G,rpt) message to RPF'(S,G,rpt). A similar scenario exists when
RPF'(S,G,rpt) changes to become equal to RPF'(*,G)."
::= { vRtrPimNgGrpSrcEntry 20 }
vRtrPimNgGrpSrcRegisterState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (0),
join (1),
joinPending (2),
prune (3),
nullJoin (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRegisterState indicates the register
state. The register state is kept at the source DR. When the host
starts sending multicast packets and if there are no entries
programmed for that group, the source DR sends a Register packet to
the RP(G). Register state transition happen based on the register stop
timer and the response received from the RP."
::= { vRtrPimNgGrpSrcEntry 21 }
vRtrPimNgGrpSrcRegisterStopTmr OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRegisterStopTmr indicates the time
remaining before the vRtrPimNgGrpSrcRegisterState might transition to
a different state. This timer has a non-zero value when the value of
vRtrPimNgGrpSrcRegisterState is not 'noInfo'."
::= { vRtrPimNgGrpSrcEntry 22 }
vRtrPimNgGrpSrcKeepaliveTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcKeepaliveTimer is applicable only for
(S,G) entries. The (S,G) Keepalive Timer is updated by data being
forwarded using this (S,G) forwarding state. It is used to keep (S,G)
state alive in the absence of explicit (S,G) Joins."
::= { vRtrPimNgGrpSrcEntry 23 }
vRtrPimNgGrpSrcNumImmediateOif OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumImmediateOif indicates the number of
interfaces in the immediate outgoing interface list. An outgoing list
can be 'immediate' if it is built directly from the state of the
relevant type as indicated by vRtrPimNgGrpSrcType."
::= { vRtrPimNgGrpSrcEntry 24 }
vRtrPimNgGrpSrcNumInheritedOif OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumInheritedOif indicates the number of
interfaces in the inherited outgoing interface list. An 'inherited'
list inherits state from other types."
::= { vRtrPimNgGrpSrcEntry 25 }
vRtrPimNgGrpSrcNumInherRptOif OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumInherRptOif indicates the number of
interfaces in the inherited outgoing interface list for (S,G,Rpt)."
::= { vRtrPimNgGrpSrcEntry 26 }
vRtrPimNgGrpSrcNumLclRxInclIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumLclRxInclIf indicates the number of
interfaces in the local membership include interface list. Local
membership is the result of the local membership mechanism (IGMP)
running on a interface. Include list contains interfaces which are
interested in receiving multicast traffic for this source group entry."
::= { vRtrPimNgGrpSrcEntry 27 }
vRtrPimNgGrpSrcNumLclRxExclIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumLclRxExclIf indicates the number of
interfaces in the local membership exclude interface list. Local
membership is the result of the local membership mechanism (IGMP)
running on the interface. Exclude list contains interfaces which are
not interested in receiving multicast traffic for this source group
entry."
::= { vRtrPimNgGrpSrcEntry 28 }
vRtrPimNgGrpSrcNumJoinPruneIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumJoinPruneIf indicates the number of
interfaces on which the router received a Join or Prune message for
this source group combination."
::= { vRtrPimNgGrpSrcEntry 29 }
vRtrPimNgGrpSrcNumLostAssertIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumLostAssertIf indicates the number of
interfaces on which the router lost assert for this source group
combination."
::= { vRtrPimNgGrpSrcEntry 30 }
vRtrPimNgGrpSrcUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUpTime indicates the time since this
source group entry got created."
::= { vRtrPimNgGrpSrcEntry 31 }
vRtrPimNgGrpSrcNumSGRptPruneOif OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcNumSGRptPruneOif indicates the number of
interfaces on which the router received (S,G,Rpt) prunes."
::= { vRtrPimNgGrpSrcEntry 32 }
vRtrPimNgGrpSrcRxRegFrmAnycstRP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRxRegFrmAnycstRP indicates whether a
register message for this source group combination was received from
the anycast RP and not from the designated router connected to the
source. vRtrPimNgGrpSrcRxRegFrmAnycstRP is not applicable when the
value of vRtrPimNgGrpSrcType is starStarRP or starG."
::= { vRtrPimNgGrpSrcEntry 33 }
vRtrPimNgGrpSrcRslvdByRtTblType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
mucastRouteTable (1),
ucastRouteTable (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRslvdByRtTblType indicates which unicast
routing table was used to resolve this source group entry.
The value of this object will be 'mucastRouteTable' if the source or
rendezvous point (RP) is resolved by the multicast-unicast route
table. The value of this object will be 'ucastRouteTable' if the
source or rendezvous point (RP) is resolved by the unicast route
table. The value will be 'none' if the source or RP is unresolved."
::= { vRtrPimNgGrpSrcEntry 34 }
vRtrPimNgGrpSrcCurrFwdingRate OBJECT-TYPE
SYNTAX Counter32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcCurrFwdingRate indicates the current
forwarding rate being used by a source group(S,G) entry or (*,G)
entry, where * means any source entry, for the traffic in bits per
second(bps). This forwarding rate is calculated before ingress QoS
policing or shaping is applied."
::= { vRtrPimNgGrpSrcEntry 35 }
vRtrPimNgGrpSrcCurrFwdingOFRate OBJECT-TYPE
SYNTAX Counter32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcCurrFwdingOFRate indicates the number of
times associated vRtrPimNgGrpSrcCurrFwdingRate counter has overflowed."
::= { vRtrPimNgGrpSrcEntry 36 }
vRtrPimNgGrpSrcCurrFwdingHCRate OBJECT-TYPE
SYNTAX Counter64
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcCurrFwdingHCRate indicates the current
forwarding rate being used by a source group(S,G) entry or (*,G)
entry, where * means any source entry, for the traffic in bits per
second(bps)."
::= { vRtrPimNgGrpSrcEntry 37 }
vRtrPimNgGrpSrcGrpSptThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGrpSptThreshold indicates the configured
threshold in kilobits per second(kbps) for the group to which
this (S,G) belongs. For a group G configured with a threshold,
switchover to SPT for an (S,G) is attempted only if the (S,G)'s rate
exceeds this configured threshold."
::= { vRtrPimNgGrpSrcEntry 38 }
vRtrPimNgGrpSrcGrpAdminBw OBJECT-TYPE
SYNTAX Gauge32 (0..40000000)
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGrpAdminBw indicates the administrative
bandwidth in kilobits per second(kbps) for the group to which this
(S,G) belongs."
::= { vRtrPimNgGrpSrcEntry 39 }
vRtrPimNgGrpSrcGrpEcmpOptThresh OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGrpEcmpOptThresh indicates the optional
threshold value for ECMP balancing."
::= { vRtrPimNgGrpSrcEntry 40 }
vRtrPimNgGrpSrcSpmsiRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcSpmsiRpfIfIndex indicates in an MVPN
scenario the router's SPMSI interface index, if any, on which the RPF
neighbor exists."
::= { vRtrPimNgGrpSrcEntry 41 }
vRtrPimNgGrpSrcRpfSecNbrAddrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRpfSecNbrAddrTyp indicates the type of the
address of the secondary RPF neighbor.
The value of this object is applicable only when the value of the
object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus'
indicating that the MVPN is configured with source redundancy.
When MVPN is configured with source redundancy, MVPN is capable of
receiving traffic from two different PEs for the same source."
::= { vRtrPimNgGrpSrcEntry 42 }
vRtrPimNgGrpSrcRpfSecNbrAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRpfSecNbrAddr indicates the address of the
secondary RPF neighbor.
The value of this object is applicable only when the value of the
object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus'
indicating that the MVPN is configured with source redundancy."
::= { vRtrPimNgGrpSrcEntry 43 }
vRtrPimNgGrpSrcRpfSecIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRpfSecIfIndex indicates the router's
interface index on which the secondary RPF neighbor exists.
The value of this object is applicable only when the value of the
object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus'
indicating that the MVPN is configured with source redundancy."
::= { vRtrPimNgGrpSrcEntry 44 }
vRtrPimNgGrpSrcAdvtAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcAdvtAddrType indicates the type of the
address of vRtrPimNgGrpSrcAdvtAddr."
::= { vRtrPimNgGrpSrcEntry 45 }
vRtrPimNgGrpSrcAdvtAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcAdvtAddr indicates the router address that
advertised the route to the source indicated by
vRtrPimNgGrpSrcSourceAddress."
::= { vRtrPimNgGrpSrcEntry 46 }
vRtrPimNgGrpSrcStdbyMRIBSrcFlags OBJECT-TYPE
SYNTAX BITS {
self (0),
direct (1),
remote (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStdbyMRIBSrcFlags indicates the MRIB
information about the source reachable through the standby RPF
interface.
This object is applicable only for (S,G) entries,i.e., when
vRtrPimNgGrpSrcType is 'sg'."
::= { vRtrPimNgGrpSrcEntry 47 }
vRtrPimNgGrpSrcStdbyUpJpState OBJECT-TYPE
SYNTAX INTEGER {
notJoined (0),
joined (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStdbyUpJpState indicates the standby RPF
Join-Prune state.
This object is applicable only for (S,G) entries,i.e., when
vRtrPimNgGrpSrcType is 'sg'."
::= { vRtrPimNgGrpSrcEntry 48 }
vRtrPimNgGrpSrcStdbyUpJpTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStdbyUpJpTimer indicates the time
remaining before the router sends another Join message to it's
upstream neighbor reachable through the standby RPF interface.
This object is applicable only for (S,G) entries,i.e., when
vRtrPimNgGrpSrcType is 'sg'."
::= { vRtrPimNgGrpSrcEntry 49 }
vRtrPimNgGrpSrcDSRpfvNbrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcDSRpfvNbrType indicates the type of
address of the downstream RPF vector neighbor."
::= { vRtrPimNgGrpSrcEntry 50 }
vRtrPimNgGrpSrcDSRpfvNbr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcDSRpfvNbr indicates the address of the
downstream RPF vector neighbor."
::= { vRtrPimNgGrpSrcEntry 51 }
vRtrPimNgGrpSrcDSRpfvProxyType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcDSRpfvProxyType indicates the type of
address of the downstream RPF vector proxy."
::= { vRtrPimNgGrpSrcEntry 52 }
vRtrPimNgGrpSrcDSRpfvProxy OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcDSRpfvProxy indicates the address of the
downstream RPF vector proxy."
::= { vRtrPimNgGrpSrcEntry 53 }
vRtrPimNgGrpSrcDSRpfvRD OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcDSRpfvRD indicates the downstream RPF
vector Route Distinguisher."
::= { vRtrPimNgGrpSrcEntry 54 }
vRtrPimNgGrpSrcDSRpfvType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
mvpn (1),
core (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcDSRpfvType indicates the downstream RPF
vector type."
::= { vRtrPimNgGrpSrcEntry 55 }
vRtrPimNgGrpSrcUPRpfvNbrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUPRpfvNbrType indicates the type of
address of the upstream RPF vector neighbor."
::= { vRtrPimNgGrpSrcEntry 56 }
vRtrPimNgGrpSrcUPRpfvNbr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUPRpfvNbr indicates the address of the
upstream RPF vector neighbor."
::= { vRtrPimNgGrpSrcEntry 57 }
vRtrPimNgGrpSrcUPRpfvProxyType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUPRpfvProxyType indicates the type of
address of the upstream RPF vector proxy."
::= { vRtrPimNgGrpSrcEntry 58 }
vRtrPimNgGrpSrcUPRpfvProxy OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUPRpfvProxy indicates the address of the
upstream RPF vector proxy."
::= { vRtrPimNgGrpSrcEntry 59 }
vRtrPimNgGrpSrcUPRpfvRD OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUPRpfvRD indicates the upstream RPF vector
Route Distinguisher."
::= { vRtrPimNgGrpSrcEntry 60 }
vRtrPimNgGrpSrcUPRpfvType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
mvpn (1),
core (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcUPRpfvType indicates the upstream RPF
vector type."
::= { vRtrPimNgGrpSrcEntry 61 }
vRtrPimNgGrpSrcRpfvFlags OBJECT-TYPE
SYNTAX BITS {
upNbrNoJa (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcRpfvFlags indicates the state of the
rpf-vectors.
When the bit 'upNbrNoJa' is set, it indicates that the upstream
neighbor towards the rpf-vector proxy does not support
join-attributes."
::= { vRtrPimNgGrpSrcEntry 62 }
vRtrPimNgGrpSrcState OBJECT-TYPE
SYNTAX INTEGER {
none (0),
active (1),
standby (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The values of vRtrPimNgGrpSrcState indicates the current state of the
(S,G)."
::= { vRtrPimNgGrpSrcEntry 63 }
vRtrPimNgGrpSrcMode OBJECT-TYPE
SYNTAX INTEGER {
none (0),
sparse (1),
dense (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The values of vRtrPimNgGrpSrcMode indicates the mode of operation for
the (S,G)."
::= { vRtrPimNgGrpSrcEntry 64 }
vRtrPimNgGrpSrcPruneLimitTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcPruneLimitTimer indicates the time until
which no prunes will be sent upstream."
::= { vRtrPimNgGrpSrcEntry 65 }
vRtrPimNgGrpSrcGraftRetryTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGraftRetryTimer indicates the time
interval between which two grafts are sent upstream and no ack is
received from the upstream router."
::= { vRtrPimNgGrpSrcEntry 66 }
vRtrPimNgGrpSrcIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGrpSrcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the PIM enabled interfaces for an entry in
vRtrPimNgGrpSrcTable."
::= { vRtrPimNgProtocolObjs 10 }
vRtrPimNgGrpSrcIfEntry OBJECT-TYPE
SYNTAX VRtrPimNgGrpSrcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgGrpSrcIfTable. Each entry represents the
state of the PIM enabled interface for every vRtrPimNgGrpSrcEntry."
INDEX {
vRtrID,
vRtrPimNgGrpSrcGrpAddrType,
vRtrPimNgGrpSrcGroupAddress,
vRtrPimNgGrpSrcSrcAddrType,
vRtrPimNgGrpSrcSourceAddress,
vRtrIfIndex
}
::= { vRtrPimNgGrpSrcIfTable 1 }
VRtrPimNgGrpSrcIfEntry ::= SEQUENCE
{
vRtrPimNgGrpSrcIfFlags BITS,
vRtrPimNgGrpSrcSpmsiIfIndex InterfaceIndexOrZero
}
vRtrPimNgGrpSrcIfFlags OBJECT-TYPE
SYNTAX BITS {
immediateOifList (0),
inheritedOifList (1),
inheritedRptOifList (2),
localRxInclude (3),
localRxExclude (4),
joinPruneList (5),
lostAssertList (6),
sgRptPruneOifList (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcIfFlags indicates the different lists that
this interface belongs to."
::= { vRtrPimNgGrpSrcIfEntry 1 }
vRtrPimNgGrpSrcSpmsiIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcSpmsiIfIndex indicates in an MVPN scenario
the router's SPMSI interface index, if any, corresponding to the
outgoing IPMSI interface."
::= { vRtrPimNgGrpSrcIfEntry 2 }
vRtrPimNgCRPGrpPrfxTblLstChnged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrfxTblLstChnged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgCRPGrpPrefixTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 11 }
vRtrPimNgCRPGrpPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgCRPGrpPrefixEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"vRtrPimNgCRPGrpPrefixTable lists the group prefixes for which the
router sends the Candidate RP Advertisement.
This table was obsoleted in release 7.0. It is replaced with the
vRtrPimNgCRPGrpPrefixInetTable to support ipv6 address."
::= { vRtrPimNgProtocolObjs 12 }
vRtrPimNgCRPGrpPrefixEntry OBJECT-TYPE
SYNTAX VRtrPimNgCRPGrpPrefixEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vRtrPimNgCRPGrpPrefixTable. Each entry represents the
group prefix for which the router sends the Candidate RP
Advertisement(CRP-Adv). CRP-Adv messages are sent to the Elected BSR
router(E-BSR)."
INDEX {
vRtrID,
vRtrPimNgCRPGrpPrfixGrpAddrType,
vRtrPimNgCRPGrpPrefixGrpAddr,
vRtrPimNgCRPGrpPrefixGrpMask
}
::= { vRtrPimNgCRPGrpPrefixTable 1 }
VRtrPimNgCRPGrpPrefixEntry ::= SEQUENCE
{
vRtrPimNgCRPGrpPrfixGrpAddrType InetAddressType,
vRtrPimNgCRPGrpPrefixGrpAddr InetAddress,
vRtrPimNgCRPGrpPrefixGrpMask IpAddressPrefixLength,
vRtrPimNgCRPGrpPrefixRowStatus RowStatus,
vRtrPimNgCRPGrpPrfixRowLstChngd TimeStamp
}
vRtrPimNgCRPGrpPrfixGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrfixGrpAddrType indicates the type of
address represented by vRtrPimNgCRPGrpPrefixGrpAddr."
::= { vRtrPimNgCRPGrpPrefixEntry 1 }
vRtrPimNgCRPGrpPrefixGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrefixGrpAddr combined with the value of
vRtrPimNgCRPGrpPrefixGrpMask indicates the range of multicast group
addresses for which the router advertises to be the Candidate RP. The
value of vRtrPimNgAFGenCRPAddress is sent as the RP address."
::= { vRtrPimNgCRPGrpPrefixEntry 2 }
vRtrPimNgCRPGrpPrefixGrpMask OBJECT-TYPE
SYNTAX IpAddressPrefixLength
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrefixGrpMask indicates the mask which is
combined with the value of vRtrPimNgCRPGrpPrefixGrpAddr to get the
range of multicast group addresses for which the router advertises to
be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as
the RP address."
::= { vRtrPimNgCRPGrpPrefixEntry 3 }
vRtrPimNgCRPGrpPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrefixRowStatus is used to create or
destroy entries in this table."
::= { vRtrPimNgCRPGrpPrefixEntry 4 }
vRtrPimNgCRPGrpPrfixRowLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrfixRowLstChngd indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgCRPGrpPrefixEntry 5 }
vRtrPimNgCRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgCRPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"vRtrPimNgCRPTable lists the C-RPs and the group prefixes sent in the
C-RP advertisement. vRtrPimNgCRPTable will be empty on all routers
except the elected BSR router.
This table was obsoleted in release 7.0. It is replaced with the
vRtrPimNgCRPInetTable to support ipv6 address."
::= { vRtrPimNgProtocolObjs 13 }
vRtrPimNgCRPEntry OBJECT-TYPE
SYNTAX VRtrPimNgCRPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vRtrPimNgCRPTable. It is created when the Elected BSR
receives a Candidate-RP Advertisement from the C-RPs."
INDEX {
vRtrID,
vRtrPimNgCRPAddressType,
vRtrPimNgCRPAddress,
vRtrPimNgCRPGrpAddrType,
vRtrPimNgCRPGrpAddr,
vRtrPimNgCRPGrpMask
}
::= { vRtrPimNgCRPTable 1 }
VRtrPimNgCRPEntry ::= SEQUENCE
{
vRtrPimNgCRPAddressType InetAddressType,
vRtrPimNgCRPAddress InetAddress,
vRtrPimNgCRPGrpAddrType InetAddressType,
vRtrPimNgCRPGrpAddr InetAddress,
vRtrPimNgCRPGrpMask IpAddressPrefixLength,
vRtrPimNgCRPHoldtime Integer32,
vRtrPimNgCRPPriority Integer32,
vRtrPimNgCRPExpiryTime Integer32
}
vRtrPimNgCRPAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPAddressType indicates the type of address of
the Candidate RP."
::= { vRtrPimNgCRPEntry 1 }
vRtrPimNgCRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPAddress indicates the Candidate RP address."
::= { vRtrPimNgCRPEntry 2 }
vRtrPimNgCRPGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpAddrType indicates the type of the address
represented by vRtrPimNgCRPGrpAddr."
::= { vRtrPimNgCRPEntry 3 }
vRtrPimNgCRPGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpAddr combined with the value of
vRtrPimNgCRPGrpMask indicates the range of multicast group addresses
for which vRtrPimNgCRPAddress is the Candidate RP."
::= { vRtrPimNgCRPEntry 4 }
vRtrPimNgCRPGrpMask OBJECT-TYPE
SYNTAX IpAddressPrefixLength
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPGrpMask indicates the mask which is combined
with vRtrPimNgCRPGrpAddr to get the range of multicast group addresses
for which vRtrPimNgCRPAddress is the Candidate RP."
::= { vRtrPimNgCRPEntry 5 }
vRtrPimNgCRPHoldtime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPHoldtime indicates the hold time of the
candidate RP. It is used by the bootstrap router to timeout the RP
entries if it does not listen to another C-RP advertisement within the
holdtime period."
::= { vRtrPimNgCRPEntry 6 }
vRtrPimNgCRPPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is used to
elect RP for a group range. A value of 0 is considered as the highest
priority."
::= { vRtrPimNgCRPEntry 7 }
vRtrPimNgCRPExpiryTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgCRPExpiryTime indicates the minimum time
remaining before the Candidate-RP will be declared down. If the local
router is not the BSR, this value is 0."
::= { vRtrPimNgCRPEntry 8 }
vRtrPimNgRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgRPSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table lists the RP Set sent by the Elected BSR in the
Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent
in case of Auto-RP. It also contains the static entries in
vRtrPimNgStGrptoRPTable. The router uses this table to calculate
the group-to-RP mappings.
This table was obsoleted in release 7.0. It is replaced with the
vRtrPimNgRPSetInetTable to support ipv6 address."
::= { vRtrPimNgProtocolObjs 14 }
vRtrPimNgRPSetEntry OBJECT-TYPE
SYNTAX VRtrPimNgRPSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vRtrPimNgRPSetTable. It is created by the elected BSR
when it receives the Candidate-RP-Adv messages. Other routers create
this entry on receiving Bootstrap Message(BSM) sent by the elected BSR
router. It can also be created when a router receives a Mapping
message from the Auto-RP Mapping Agent."
INDEX {
vRtrID,
vRtrPimNgRPSetType,
vRtrPimNgRPSetGrpAddrType,
vRtrPimNgRPSetGrpAddr,
vRtrPimNgRPSetGrpMask,
vRtrPimNgRPSetCRPAddrType,
vRtrPimNgRPSetCRPAddress
}
::= { vRtrPimNgRPSetTable 1 }
VRtrPimNgRPSetEntry ::= SEQUENCE
{
vRtrPimNgRPSetType INTEGER,
vRtrPimNgRPSetGrpAddrType InetAddressType,
vRtrPimNgRPSetGrpAddr InetAddress,
vRtrPimNgRPSetGrpMask IpAddressPrefixLength,
vRtrPimNgRPSetCRPAddrType InetAddressType,
vRtrPimNgRPSetCRPAddress InetAddress,
vRtrPimNgRPSetHoldtime Integer32,
vRtrPimNgRPSetPriority Integer32,
vRtrPimNgRPSetExpiryTime Unsigned32
}
vRtrPimNgRPSetType OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
static (2),
auto-rp (3)
}
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"vRtrPimNgRPSetType is an index into this table. It indicates whether
the entry was learned through the bootstrap mechanism or if it was
statically configured using the vRtrPimNgStGrptoRPTable."
::= { vRtrPimNgRPSetEntry 1 }
vRtrPimNgRPSetGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgRPSetGrpAddrType indicates the type of address
represented by vRtrPimNgRPSetGrpAddr."
::= { vRtrPimNgRPSetEntry 2 }
vRtrPimNgRPSetGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgRPSetGrpAddr, combined with the value of
vRtrPimNgRPSetGrpMask, indicates the range of multicast group
addresses for which vRtrPimNgRPSetCRPAddress is the Candidate RP."
::= { vRtrPimNgRPSetEntry 3 }
vRtrPimNgRPSetGrpMask OBJECT-TYPE
SYNTAX IpAddressPrefixLength
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"vRtrPimNgRPSetGrpMask indicates the mask which is combined with
vRtrPimNgRPSetGrpAddr to get the range of multicast group addresses
for which vRtrPimNgRPSetCRPAddress is the candidate RP."
::= { vRtrPimNgRPSetEntry 4 }
vRtrPimNgRPSetCRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgRPSetCRPAddrType indicates the type of address
of the Candidate RP address."
::= { vRtrPimNgRPSetEntry 5 }
vRtrPimNgRPSetCRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgRPSetCRPAddress indicates the Candidate RP
address."
::= { vRtrPimNgRPSetEntry 6 }
vRtrPimNgRPSetHoldtime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgRPSetHoldtime indicates the hold time of the
candidate RP. It is used by the bootstrap router to timeout the RP
entries if it does not listen to another C-RP advertisement within the
holdtime period. The value of vRtrPimNgRPSetHoldtime will be zero for
static entries."
::= { vRtrPimNgRPSetEntry 7 }
vRtrPimNgRPSetPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgRPSetPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is used to
elect RP for a group range. A value of 0 is considered as the highest
priority. For static entries, the priority is always 1."
::= { vRtrPimNgRPSetEntry 8 }
vRtrPimNgRPSetExpiryTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgRPSetExpiryTime indicates the minimum time
remaining before the RP Set group prefix will be declared down."
::= { vRtrPimNgRPSetEntry 9 }
vRtrPimNgGenStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGenStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgGenStatTable lists PIM statistics for a particular PIM
instance."
::= { vRtrPimNgProtocolObjs 15 }
vRtrPimNgGenStatEntry OBJECT-TYPE
SYNTAX VRtrPimNgGenStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgGenStatTable."
AUGMENTS { vRtrPimNgAFGenEntry }
::= { vRtrPimNgGenStatTable 1 }
VRtrPimNgGenStatEntry ::= SEQUENCE
{
vRtrPimNgGenStatTxCrpaPdus Counter32,
vRtrPimNgGenStatTxCrpaPduErrs Counter32,
vRtrPimNgGenStatRxCrpaPdus Counter32,
vRtrPimNgGenStatRxCrpaPduDrops Counter32,
vRtrPimNgGenStatStarStarRPTypes Gauge32,
vRtrPimNgGenStatStarGTypes Gauge32,
vRtrPimNgGenStatSGTypes Gauge32,
vRtrPimNgGenStatTxRegisters Counter32,
vRtrPimNgGenStatTxRegisterErrs Counter32,
vRtrPimNgGenStatTxNullRegisters Counter32,
vRtrPimNgGenStatTxRegTTLDrops Counter32,
vRtrPimNgGenStatForwardCrpaPdus Counter32,
vRtrPimNgGenStatFwdCrpaDrops Counter32,
vRtrPimNgGenStatTxMdtJoinTlvs Counter32,
vRtrPimNgGenStatRxMdtJoinTlvs Counter32,
vRtrPimNgGenStatTxMdtJnTlvErrs Counter32,
vRtrPimNgGenStatRxMdtJnTlvErrs Counter32,
vRtrPimNgGenStatTxActiveMdts Gauge32,
vRtrPimNgGenStatRxActiveMdts Gauge32,
vRtrPimNgGenStatTxSpmsiLimitHits Counter32,
vRtrPimNgGenStatRxCtrlPduIfDrops Counter32,
vRtrPimNgGenStatP2mpPmsiReqFails Counter32,
vRtrPimNgGenStatP2mpPmsiCrtFails Counter32,
vRtrPimNgGenStatTxMdts Counter32,
vRtrPimNgGenStatRxMdts Counter32,
vRtrPimNgGenStatRxActvPsuedoMdts Counter32,
vRtrPimNgGenStatTxMsActiveMdts Counter32
}
vRtrPimNgGenStatTxCrpaPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxCrpaPdus indicates the number of PIM
Candidate-RP Advertisements (C-RP-Adv) transmitted by this router
instance."
::= { vRtrPimNgGenStatEntry 1 }
vRtrPimNgGenStatTxCrpaPduErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxCrpaPduErrs indicates the number of
errors while transmitting PIM Candidate-RP Advertisements (C-RP-Adv)."
::= { vRtrPimNgGenStatEntry 2 }
vRtrPimNgGenStatRxCrpaPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxCrpaPdus indicates the number of PIM
Candidate-RP Advertisements (C-RP-Adv) received by this instance."
::= { vRtrPimNgGenStatEntry 3 }
vRtrPimNgGenStatRxCrpaPduDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxCrpaPduDrops indicates the number of
PIM Candidate-RP Advertisements (C-RP-Adv) received by this instance,
but were dropped."
::= { vRtrPimNgGenStatEntry 4 }
vRtrPimNgGenStatStarStarRPTypes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatStarStarRPTypes indicates the number of
entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is
'starStarRP'."
::= { vRtrPimNgGenStatEntry 5 }
vRtrPimNgGenStatStarGTypes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatStarGTypes indicates the number of
entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is
'starG'."
::= { vRtrPimNgGenStatEntry 6 }
vRtrPimNgGenStatSGTypes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatSGTypes indicates the number of entries
in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is 'sg'."
::= { vRtrPimNgGenStatEntry 7 }
vRtrPimNgGenStatTxRegisters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxRegisters indicates the number of PIM
Register messages transmitted by this instance."
::= { vRtrPimNgGenStatEntry 8 }
vRtrPimNgGenStatTxRegisterErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxRegisterErrs indicates the number the
times there was an error while transmitting PIM Register messages by
this instance."
::= { vRtrPimNgGenStatEntry 9 }
vRtrPimNgGenStatTxNullRegisters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxNullRegisters indicates the number of
PIM Null Register messages transmitted by this instance."
::= { vRtrPimNgGenStatEntry 10 }
vRtrPimNgGenStatTxRegTTLDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxRegTTLDrops indicates the number of
multicast data packets which could not be encapsulated in Register
messages because the Time To Live (TTL) was zero."
::= { vRtrPimNgGenStatEntry 11 }
vRtrPimNgGenStatForwardCrpaPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatForwardCrpaPdus indicates the number of
Candidate-RP Advertisements(C-RP-Adv) that were forwarded by the
router. C-RP-Advs are forwarded when the received advertisement has a
router alert set and the destination address is not the router's local
address."
::= { vRtrPimNgGenStatEntry 12 }
vRtrPimNgGenStatFwdCrpaDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatFwdCrpaDrops indicates the number of
times the Candidate-RP Advertisements(C-RP-Adv) could not be forwarded
by the router."
::= { vRtrPimNgGenStatEntry 13 }
vRtrPimNgGenStatTxMdtJoinTlvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxMdtJoinTlvs indicates the number of
times MDT Join TLV were transmitted."
::= { vRtrPimNgGenStatEntry 14 }
vRtrPimNgGenStatRxMdtJoinTlvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxMdtJoinTlvs indicates the number of
times MDT Join TLV were received."
::= { vRtrPimNgGenStatEntry 15 }
vRtrPimNgGenStatTxMdtJnTlvErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxMdtJnTlvErrs indicates indicates the
number of times MDT Join TLV could not be transmitted."
::= { vRtrPimNgGenStatEntry 16 }
vRtrPimNgGenStatRxMdtJnTlvErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxMdtJnTlvErrs indicates indicates number
of times MDT Join TLVs were dropped due to errors in the received TLV."
::= { vRtrPimNgGenStatEntry 17 }
vRtrPimNgGenStatTxActiveMdts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxActiveMdts indicates the number of
active MDTs on which the PE is forwarding packets. This object is
applicable to VPRNs only."
::= { vRtrPimNgGenStatEntry 18 }
vRtrPimNgGenStatRxActiveMdts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxActiveMdts indicates number of active
Mdts on which the PE is receiving packets. This object is applicable
to VPRNs only."
::= { vRtrPimNgGenStatEntry 19 }
vRtrPimNgGenStatTxSpmsiLimitHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxSpmsiLimitHits indicates the number of
times the switch from ipmsi to spmsi is failed because of reaching the
maximum spmsi limit configured in
TIMETRA-VRTR-MIB::vRtrMvpnSpmsiMaxLimit."
::= { vRtrPimNgGenStatEntry 20 }
vRtrPimNgGenStatRxCtrlPduIfDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxCtrlPduIfDrops indicates the number of
control PDU drops on an interface which is operationally down or on an
interface on which PIM is not enabled."
::= { vRtrPimNgGenStatEntry 21 }
vRtrPimNgGenStatP2mpPmsiReqFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatP2mpPmsiReqFails indicates the number of
times a P2MP PMSI tunnel request has failed."
::= { vRtrPimNgGenStatEntry 22 }
vRtrPimNgGenStatP2mpPmsiCrtFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatP2mpPmsiCrtFails indicates the number of
times a P2MP PMSI tunnel creation has failed."
::= { vRtrPimNgGenStatEntry 23 }
vRtrPimNgGenStatTxMdts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxMdts indicates the number of MDTs
created by the PE for forwarding packets. This object is applicable to
VPRNs only."
::= { vRtrPimNgGenStatEntry 24 }
vRtrPimNgGenStatRxMdts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxMdts indicates the number of MDTs
created by the PE for receiving packets. This object is applicable to
VPRNs only."
::= { vRtrPimNgGenStatEntry 25 }
vRtrPimNgGenStatRxActvPsuedoMdts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatRxActvPsuedoMdts indicates the number of
active Mdts on which the pseudo PE is receiving packets. This object
is applicable to VPRNs only."
::= { vRtrPimNgGenStatEntry 26 }
vRtrPimNgGenStatTxMsActiveMdts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGenStatTxMsActiveMdts indicates the number of
active MDTs on which the PE is forwarding packets. This S-PMSI is
threshold controlled."
::= { vRtrPimNgGenStatEntry 27 }
vRtrPimNgGrpSrcStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGrpSrcStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgGrpSrcStatTable contains statistics for the entries in the
vRtrPimNgGrpSrcTable. These statistics are collected by the forwarding
engine."
::= { vRtrPimNgProtocolObjs 16 }
vRtrPimNgGrpSrcStatEntry OBJECT-TYPE
SYNTAX VRtrPimNgGrpSrcStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgGrpSrcStatTable."
AUGMENTS { vRtrPimNgGrpSrcEntry }
::= { vRtrPimNgGrpSrcStatTable 1 }
VRtrPimNgGrpSrcStatEntry ::= SEQUENCE
{
vRtrPimNgGrpSrcStatFrwdedPkts Counter32,
vRtrPimNgGrpSrcStatOFFrwdedPkts Counter32,
vRtrPimNgGrpSrcStatHCFrwdedPkts Counter64,
vRtrPimNgGrpSrcStatDscrdPkts Counter32,
vRtrPimNgGrpSrcStatOFDscrdPkts Counter32,
vRtrPimNgGrpSrcStatHCDscrdPkts Counter64,
vRtrPimNgGrpSrcStatRPFMsmtch Counter32,
vRtrPimNgGrpSrcStatOFRPFMsmtch Counter32,
vRtrPimNgGrpSrcStatHCRPFMsmtch Counter64,
vRtrPimNgGrpSrcStatFrdedOct Counter32,
vRtrPimNgGrpSrcStatOFFrdedOct Counter32,
vRtrPimNgGrpSrcStatHCFrdedOct Counter64
}
vRtrPimNgGrpSrcStatFrwdedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatFrwdedPkts indicates the number
of multicast packets that were forwarded to the interfaces in the
outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the
interfaces in the outgoing interface list. This packet count is
calculated before ingress QoS policing or shaping is applied."
::= { vRtrPimNgGrpSrcStatEntry 1 }
vRtrPimNgGrpSrcStatOFFrwdedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatOFFrwdedPkts indicates the number of
times the associated vRtrPimNgGrpSrcStatFrwdedPkts counter has
overflowed."
::= { vRtrPimNgGrpSrcStatEntry 2 }
vRtrPimNgGrpSrcStatHCFrwdedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatHCFrwdedPkts indicates the number of
multicast packets that were forwarded to the interfaces in the
outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the
interfaces in the outgoing interface list."
::= { vRtrPimNgGrpSrcStatEntry 3 }
vRtrPimNgGrpSrcStatDscrdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatDscrdPkts indicates the number of
multicast packets that matched this source group entry but were
discarded. For (S,G) entries, if the traffic is getting forwarded on
the SPT, the packets arriving from the RPT will be discarded."
::= { vRtrPimNgGrpSrcStatEntry 4 }
vRtrPimNgGrpSrcStatOFDscrdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatOFDscrdPkts indicates the number of
times the associated vRtrPimNgGrpSrcStatDscrdPkts counter has
overflowed."
::= { vRtrPimNgGrpSrcStatEntry 5 }
vRtrPimNgGrpSrcStatHCDscrdPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatHCDscrdPkts indicates the number of
multicast packets that matched this source group entry but were
discarded. For (S,G) entries, if the traffic is getting forwarded on
the SPT, the packets arriving from the RPT will be discarded."
::= { vRtrPimNgGrpSrcStatEntry 6 }
vRtrPimNgGrpSrcStatRPFMsmtch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatRPFMsmtch indicates the number of
multicast packets that matched this source group entry but they did
not arrive on the the interface indicated by
vRtrPimNgGrpSrcRpfIfIndex."
::= { vRtrPimNgGrpSrcStatEntry 7 }
vRtrPimNgGrpSrcStatOFRPFMsmtch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatOFRPFMsmtch indicates the number of
times the associated vRtrPimNgGrpSrcStatRPFMsmtch counter has
overflowed."
::= { vRtrPimNgGrpSrcStatEntry 8 }
vRtrPimNgGrpSrcStatHCRPFMsmtch OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatHCRPFMsmtch indicates the number of
multicast packets that matched this source group entry but they did
not arrive on the the interface indicated by
vRtrPimNgGrpSrcRpfIfIndex."
::= { vRtrPimNgGrpSrcStatEntry 9 }
vRtrPimNgGrpSrcStatFrdedOct OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatFrdedOct indicates the number of
multicast octets that were forwarded to the interfaces in the outgoing
interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the
outgoing interface list."
::= { vRtrPimNgGrpSrcStatEntry 10 }
vRtrPimNgGrpSrcStatOFFrdedOct OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatOFFrdedOct indicates the number of
times the associated vRtrPimNgGrpSrcStatFrdedOct counter has
overflowed."
::= { vRtrPimNgGrpSrcStatEntry 11 }
vRtrPimNgGrpSrcStatHCFrdedOct OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcStatHCFrdedOct indicates the number of
multicast octets that were forwarded to the interfaces in the outgoing
interface list. vRtrPimNgGrpSrcIfTable lists all the interfaces in the
outgoing interface list."
::= { vRtrPimNgGrpSrcStatEntry 12 }
vRtrPimNgGenPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGenPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgGenPolicyTable lists PIM policies for a particular PIM
instance.
PIM Join-Prune and Register policies provide a way to to control the
creation of (*,G) or (S,G) state that gets created on a router.
The bootstrap policies provide a way to control the flow of bootstrap
messages to and from the router.
PIM Policies are created using the
TIMETRA-ROUTE-POLICY-MIB::tRPAdminPSFromCriteriaTable."
::= { vRtrPimNgProtocolObjs 17 }
vRtrPimNgGenPolicyEntry OBJECT-TYPE
SYNTAX VRtrPimNgGenPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgGenPolicyTable. Each entry corresponds to an
entry in the vRtrPimNgGeneralTable. Entries in this table are created
implicitly whenever an entry is created in the vRtrPimNgGeneralTable."
AUGMENTS { vRtrPimNgGeneralEntry }
::= { vRtrPimNgGenPolicyTable 1 }
VRtrPimNgGenPolicyEntry ::= SEQUENCE
{
vRtrPimNgImportJoinPrunePolicy1 TNamedItemOrEmpty,
vRtrPimNgImportJoinPrunePolicy2 TNamedItemOrEmpty,
vRtrPimNgImportJoinPrunePolicy3 TNamedItemOrEmpty,
vRtrPimNgImportJoinPrunePolicy4 TNamedItemOrEmpty,
vRtrPimNgImportJoinPrunePolicy5 TNamedItemOrEmpty,
vRtrPimNgImportRegisterPolicy1 TNamedItemOrEmpty,
vRtrPimNgImportRegisterPolicy2 TNamedItemOrEmpty,
vRtrPimNgImportRegisterPolicy3 TNamedItemOrEmpty,
vRtrPimNgImportRegisterPolicy4 TNamedItemOrEmpty,
vRtrPimNgImportRegisterPolicy5 TNamedItemOrEmpty,
vRtrPimNgImportBootstrapPolicy1 TNamedItemOrEmpty,
vRtrPimNgImportBootstrapPolicy2 TNamedItemOrEmpty,
vRtrPimNgImportBootstrapPolicy3 TNamedItemOrEmpty,
vRtrPimNgImportBootstrapPolicy4 TNamedItemOrEmpty,
vRtrPimNgImportBootstrapPolicy5 TNamedItemOrEmpty,
vRtrPimNgExportBootstrapPolicy1 TNamedItemOrEmpty,
vRtrPimNgExportBootstrapPolicy2 TNamedItemOrEmpty,
vRtrPimNgExportBootstrapPolicy3 TNamedItemOrEmpty,
vRtrPimNgExportBootstrapPolicy4 TNamedItemOrEmpty,
vRtrPimNgExportBootstrapPolicy5 TNamedItemOrEmpty
}
vRtrPimNgImportJoinPrunePolicy1 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportJoinPrunePolicy1 is the the first policy to be used for
determining how the PIM Join-Prune messages are filtered. Join-Prune
messages can be filtered based on different criteria such as multicast
group or source address contained in the message, interface on which
the messages are received or the address of the neighbor who is
sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 1 }
vRtrPimNgImportJoinPrunePolicy2 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportJoinPrunePolicy2 is the second policy to be used for
determining how the PIM Join-Prune messages are filtered. Join-Prune
messages can be filtered based on different criteria such as multicast
group or source address contained in the message, interface on which
the messages are received or the address of the neighbor who is
sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within
a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 2 }
vRtrPimNgImportJoinPrunePolicy3 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportJoinPrunePolicy3 is the third policy to be used for
determining how the PIM Join-Prune messages are filtered. Join-Prune
messages can be filtered based on different criteria such as multicast
group or source address contained in the message, interface on which
the messages are received or the address of the neighbor who is
sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1 through
vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first set to
the empty string, ''H, and then the new names are set into the
specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 3 }
vRtrPimNgImportJoinPrunePolicy4 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportJoinPrunePolicy4 is the fourth policy to be used for
determining how the PIM Join-Prune messages are filtered. Join-Prune
messages can be filtered based on different criteria such as multicast
group or source address contained in the message, interface on which
the messages are received or the address of the neighbor who is
sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 4 }
vRtrPimNgImportJoinPrunePolicy5 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportJoinPrunePolicy5 is the fifth policy to be used for
determining how the PIM Join-Prune messages are filtered. Join-Prune
messages can be filtered based on different criteria such as multicast
group or source address contained in the message, interface on which
the messages are received or the address of the neighbor who is
sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 5 }
vRtrPimNgImportRegisterPolicy1 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportRegisterPolicy1 is the the first policy to be used for
determining how the PIM Register messages are filtered. Register
policies are only relevant on the Rendezvous Point(RP). Register
messages can be filtered based on different criteria such as multicast
group or source address contained in the inner multicast data packet
or the interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 6 }
vRtrPimNgImportRegisterPolicy2 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportRegisterPolicy2 is the the second policy to be used for
determining how the PIM Register messages are filtered. Register
policies are only relevant on the Rendezvous Point(RP). Register
messages can be filtered based on different criteria such as multicast
group or source address contained in the inner multicast data packet
or the interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 7 }
vRtrPimNgImportRegisterPolicy3 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportRegisterPolicy3 is the the third policy to be used for
determining how the PIM Register messages are filtered. Register
policies are only relevant on the Rendezvous Point(RP). Register
messages can be filtered based on different criteria such as multicast
group or source address contained in the inner multicast data packet
or the interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 8 }
vRtrPimNgImportRegisterPolicy4 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportRegisterPolicy4 is the the fourth policy to be used for
determining how the PIM Register messages are filtered. Register
policies are only relevant on the Rendezvous Point(RP). Register
messages can be filtered based on different criteria such as multicast
group or source address contained in the inner multicast data packet
or the interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 9 }
vRtrPimNgImportRegisterPolicy5 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgImportRegisterPolicy5 is the the fifth policy to
be used for determining how the PIM Register messages are filtered.
Register policies are only relevant on the Rendezvous Point(RP).
Register messages can be filtered based on different criteria such as
multicast group or source address contained in the inner multicast
data packet or the interface on which the Register Messages are
received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 10 }
vRtrPimNgImportBootstrapPolicy1 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportBootstrapPolicy1 is the the first policy to be used for
determining how the PIM Bootstrap messages are filtered. Bootstrap
import policies are used to control the flow of Bootstrap Messages to
the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within
a single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 11 }
vRtrPimNgImportBootstrapPolicy2 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportBootstrapPolicy2 is the the second policy to be used
for determining how the PIM Bootstrap messages are filtered. Bootstrap
import policies are used to control the flow of Bootstrap Messages to
the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 12 }
vRtrPimNgImportBootstrapPolicy3 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportBootstrapPolicy3 is the the third policy to be used for
determining how the PIM Bootstrap messages are filtered. Bootstrap
import policies are used to control the flow of Bootstrap Messages to
the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 13 }
vRtrPimNgImportBootstrapPolicy4 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgImportBootstrapPolicy4 is the the fourth policy to be used
for determining how the PIM Bootstrap messages are filtered. Bootstrap
import policies are used to control the flow of Bootstrap Messages to
the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 14 }
vRtrPimNgImportBootstrapPolicy5 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgImportBootstrapPolicy5 is the the fifth policy
to be used for determining how the PIM Bootstrap messages are
filtered. Bootstrap import policies are used to control the flow of
Bootstrap Messages to the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 15 }
vRtrPimNgExportBootstrapPolicy1 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgExportBootstrapPolicy1 is the the first policy to be used for
determining how the PIM Bootstrap messages are filtered. Bootstrap
export policies are used to control the flow of Bootstrap Messages
from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 16 }
vRtrPimNgExportBootstrapPolicy2 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgExportBootstrapPolicy2 is the the second policy to be used
for determining how the PIM Bootstrap messages are filtered. Bootstrap
export policies are used to control the flow of Bootstrap Messages
from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 17 }
vRtrPimNgExportBootstrapPolicy3 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgExportBootstrapPolicy3 is the the third policy to be used for
determining how the PIM Bootstrap messages are filtered. Bootstrap
export policies are used to control the flow of Bootstrap Messages
from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 18 }
vRtrPimNgExportBootstrapPolicy4 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgExportBootstrapPolicy4 is the the fourth policy to be used
for determining how the PIM Bootstrap messages are filtered. Bootstrap
export policies are used to control the flow of Bootstrap Messages
from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 19 }
vRtrPimNgExportBootstrapPolicy5 OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgExportBootstrapPolicy5 is the the fifth policy
to be used for determining how the PIM Bootstrap messages are
filtered. Bootstrap export policies are used to control the flow of
Bootstrap Messages from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU."
DEFVAL { ''H }
::= { vRtrPimNgGenPolicyEntry 20 }
vRtrPimNgSSMGroupTableLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgSSMGroupTableLstChngd indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrPimNgSSMGroupTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 18 }
vRtrPimNgSSMGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgSSMGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgSSMGroupTable contains a range of group addresses which are
reserved for Source Specific Multicast(SSM).
The SSM standard designates IPv4 addresses in the 232/8 range and IPv6
addresses in FF3X:0000:/32 range for SSM destination addresses. This
table is used to configure group addresses in addition to those
defined in the SSM standard."
::= { vRtrPimNgProtocolObjs 19 }
vRtrPimNgSSMGroupEntry OBJECT-TYPE
SYNTAX VRtrPimNgSSMGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgSSMGroupEntry defines a group range to be used for SSM."
INDEX {
vRtrID,
vRtrPimNgSSMGroupAddressType,
vRtrPimNgSSMGroupAddress,
vRtrPimNgSSMGroupMask
}
::= { vRtrPimNgSSMGroupTable 1 }
VRtrPimNgSSMGroupEntry ::= SEQUENCE
{
vRtrPimNgSSMGroupAddressType InetAddressType,
vRtrPimNgSSMGroupAddress InetAddress,
vRtrPimNgSSMGroupMask InetAddressPrefixLength,
vRtrPimNgSSMGroupRowStatus RowStatus,
vRtrPimNgSSMGroupRowLastChanged TimeStamp
}
vRtrPimNgSSMGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgSSMGroupAddressType indicates the type of
address specified by vRtrPimNgSSMGroupAddress."
::= { vRtrPimNgSSMGroupEntry 1 }
vRtrPimNgSSMGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgSSMGroupAddress combined with the value of
vRtrPimNgSSMGroupMask indicates the range of multicast group addresses
to be used for Source Specific Multicast(SSM)."
::= { vRtrPimNgSSMGroupEntry 2 }
vRtrPimNgSSMGroupMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgSSMGroupMask indicates the mask which is
combined with vRtrPimNgSSMGroupAddress to get the range of multicast
group addresses to be used for Source Specific Multicast(SSM)."
::= { vRtrPimNgSSMGroupEntry 3 }
vRtrPimNgSSMGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgSSMGroupRowStatus is used to create or delete an
entry."
::= { vRtrPimNgSSMGroupEntry 4 }
vRtrPimNgSSMGroupRowLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgSSMGroupRowLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgSSMGroupEntry 5 }
vRtrPimNgAnycastRPTableLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAnycastRPTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgAnycastRPTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 20 }
vRtrPimNgAnycastRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgAnycastRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgAnycastRPTable contains a list of configured anycast
Rendezvous Point (RP) addresses."
::= { vRtrPimNgProtocolObjs 21 }
vRtrPimNgAnycastRPEntry OBJECT-TYPE
SYNTAX VRtrPimNgAnycastRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgAnycastRPTable represents a configured
anycast Rendezvous Point(RP). An entry in this table can be created or
destroyed by an SNMP SET request to vRtrPimNgAnycastRPRowStatus."
INDEX {
vRtrID,
vRtrPimNgAnycastRPAddressType,
vRtrPimNgAnycastRPAddress,
vRtrPimNgAnycastRPPeerAddrType,
vRtrPimNgAnycastRPPeerAddress
}
::= { vRtrPimNgAnycastRPTable 1 }
VRtrPimNgAnycastRPEntry ::= SEQUENCE
{
vRtrPimNgAnycastRPAddressType InetAddressType,
vRtrPimNgAnycastRPAddress InetAddress,
vRtrPimNgAnycastRPPeerAddrType InetAddressType,
vRtrPimNgAnycastRPPeerAddress InetAddress,
vRtrPimNgAnycastRPRowStatus RowStatus,
vRtrPimNgAnycastRPRowLstChanged TimeStamp
}
vRtrPimNgAnycastRPAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgAnycastRPAddressType indicates the address type
of vRtrPimNgAnycastRPAddress address."
::= { vRtrPimNgAnycastRPEntry 1 }
vRtrPimNgAnycastRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgAnycastRPAddress indicates the Rendezvous Point
(RP) anycast address that should be used by the router for the range
of multicast groups."
::= { vRtrPimNgAnycastRPEntry 2 }
vRtrPimNgAnycastRPPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgAnycastRPPeerAddrType indicates the address type
of vRtrPimNgAnycastRPPeerAddress address."
::= { vRtrPimNgAnycastRPEntry 3 }
vRtrPimNgAnycastRPPeerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgAnycastRPPeerAddress indicates the Peer's
Rendezvous Point (RP) anycast address that should be used by the
router for the range of multicast groups."
::= { vRtrPimNgAnycastRPEntry 4 }
vRtrPimNgAnycastRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAnycastRPRowStatus is used to create or destroy
entries in this table."
::= { vRtrPimNgAnycastRPEntry 5 }
vRtrPimNgAnycastRPRowLstChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAnycastRPRowLstChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgAnycastRPEntry 6 }
vRtrPimNgSptSwOvrThdTabLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgSptSwOvrThdTabLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgSptSwitchoverThdTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 22 }
vRtrPimNgSptSwitchoverThdTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgSptSwitchoverThdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgSptSwitchoverThdTable configures shortest path tree(spt tree)
switchover thresholds for group prefixes.
PIM-SM routers with directly connected routers receive multicast
traffic initially on a shared tree rooted at the Rendezvous Point
(RP). Once the traffic arrives on the shared tree and the source of
the traffic is known, a switchover to the spt tree rooted at the
source is attempted.
For a group that falls in the range of a prefix configured in the
table, the corresponding threshold value determines when the router
should switch over from the shared tree to the source specific
tree. The switchover is attempted only if the traffic rate on the
shared tree for the group exceeds the configured threshold.
In the absence of any matching prefix in the table, the default
behavior is to switchover when the first packet is seen. In the
presence of multiple prefixes matching a given group, the most
specific entry is used."
::= { vRtrPimNgProtocolObjs 23 }
vRtrPimNgSptSwitchoverThdEntry OBJECT-TYPE
SYNTAX VRtrPimNgSptSwitchoverThdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgSptSwitchoverThdEntry represents a
group prefix and the corresponding shortest path tree (spt tree)
switchover threshold it has to use.
An entry in this table can be created or destroyed by an SNMP SET
request to vRtrPimNgSptSwovrThdRowStatus. The SET request must
specify the group prefix as well as the threshold, or else the
entry will not be created."
INDEX {
vRtrID,
vRtrPimNgSptSwOvrThdTblGpAdType,
vRtrPimNgSptSwOvrThdTblGrpAddr,
vRtrPimNgSptSwOvrThdTblGpAdMask
}
::= { vRtrPimNgSptSwitchoverThdTable 1 }
VRtrPimNgSptSwitchoverThdEntry ::= SEQUENCE
{
vRtrPimNgSptSwOvrThdTblGpAdType InetAddressType,
vRtrPimNgSptSwOvrThdTblGrpAddr InetAddress,
vRtrPimNgSptSwOvrThdTblGpAdMask InetAddressPrefixLength,
vRtrPimNgSptSwovrThdRowStatus RowStatus,
vRtrPimNgSptSwovrThdRowLstChngd TimeStamp,
vRtrPimNgSptSwitchoverThd Unsigned32
}
vRtrPimNgSptSwOvrThdTblGpAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgSptSwOvrThdTblGpAdType indicates the address
type of vRtrPimNgSptSwOvrThdTblGrpAddr address."
::= { vRtrPimNgSptSwitchoverThdEntry 1 }
vRtrPimNgSptSwOvrThdTblGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgSptSwOvrThdTblGrpAddr indicates the group
address for which the threshold can be configured."
::= { vRtrPimNgSptSwitchoverThdEntry 2 }
vRtrPimNgSptSwOvrThdTblGpAdMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgSptSwOvrThdTblGpAdMask indicates the mask for
the group address vRtrPimNgSptSwOvrThdTblGrpAddr."
::= { vRtrPimNgSptSwitchoverThdEntry 3 }
vRtrPimNgSptSwovrThdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgSptSwovrThdRowStatus is used to create or
destroy entries in this table.
A row creation attempt will fail if vRtrPimNgSptSwitchoverThd is not
explicitly set to a value."
::= { vRtrPimNgSptSwitchoverThdEntry 4 }
vRtrPimNgSptSwovrThdRowLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgSptSwovrThdRowLstChngd indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgSptSwitchoverThdEntry 5 }
vRtrPimNgSptSwitchoverThd OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "kilobps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgSptSwitchoverThd specifies the configured
threshold in kilobits per second(kbps) for a group prefix. A
switchover is attempted only if the traffic rate on the shared tree
for the group exceeds this configured threshold.
The value of 4294967295 indicates that there will be no switchover
from RPT to SPT and traffic will continue through RPT. This value
means 'infinity'.
When there is no row in this table, switchover from RPT to SPT is done
on the first packet.
A row creation attempt will fail if this object is not explicitly set
to a value."
::= { vRtrPimNgSptSwitchoverThdEntry 6 }
vRtrPimNgDataMtThdTableLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtThdTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgDataMtThdTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 24 }
vRtrPimNgDataMtThdTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgDataMtThdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgDataMtThdTable configures Multicast Data Tunnel(Data MT)
thresholds for group prefixes.
Whenever the threshold of a C-(S,G)'s exceeds the configured threshold
value specified by vRtrPimNgDataMtThd in this table, a MT interface is
created in vRtrPimNgDataMtTable. If the data-threshold goes
below the value specified by vRtrPimNgDataMtThd, the MT
interface is automatically deleted."
::= { vRtrPimNgProtocolObjs 25 }
vRtrPimNgDataMtThdEntry OBJECT-TYPE
SYNTAX VRtrPimNgDataMtThdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgDataMtThdEntry represents a group
prefix and the corresponding Data MT threshold it has to use.
An entry in this table can be created or destroyed by an SNMP SET
request to vRtrPimNgDataMtThdRowStatus. The SET request must
specify the group prefix as well as the threshold, or else the
entry will not be created."
INDEX {
vRtrID,
vRtrPimNgDataMtThdTblGrpAdrType,
vRtrPimNgDataMtThdTblGrpAddr,
vRtrPimNgDataMtThdTblGrpAdrMask
}
::= { vRtrPimNgDataMtThdTable 1 }
VRtrPimNgDataMtThdEntry ::= SEQUENCE
{
vRtrPimNgDataMtThdTblGrpAdrType InetAddressType,
vRtrPimNgDataMtThdTblGrpAddr InetAddress,
vRtrPimNgDataMtThdTblGrpAdrMask InetAddressPrefixLength,
vRtrPimNgDataMtThdRowStatus RowStatus,
vRtrPimNgDataMtThdRowLstChngd TimeStamp,
vRtrPimNgDataMtThd Unsigned32,
vRtrPimNgDataMtSpmsiAddRxThd Unsigned32,
vRtrPimNgDataMtSpmsiDelRxThd Unsigned32
}
vRtrPimNgDataMtThdTblGrpAdrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtThdTblGrpAdrType indicates the address
type of vRtrPimNgDataMtThdTblGrpAddr address."
::= { vRtrPimNgDataMtThdEntry 1 }
vRtrPimNgDataMtThdTblGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtThdTblGrpAddr indicates the group address
for which the threshold can be configured."
::= { vRtrPimNgDataMtThdEntry 2 }
vRtrPimNgDataMtThdTblGrpAdrMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtThdTblGrpAdrMask indicates the mask for
the group address vRtrPimNgSptSwOvrThdTblGrpAddr."
::= { vRtrPimNgDataMtThdEntry 3 }
vRtrPimNgDataMtThdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtThdRowStatus is used to create or destroy
entries in this table.
A row creation attempt will fail if vRtrPimNgDataMtThd is not
explicitly set to a value."
::= { vRtrPimNgDataMtThdEntry 4 }
vRtrPimNgDataMtThdRowLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtThdRowLstChngd indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgDataMtThdEntry 5 }
vRtrPimNgDataMtThd OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
UNITS "kilobps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtThd specifies the configured threshold
in kilo bits per second(bps) for a group prefix. A MT interface is
created only if the traffic rate on the C-(S,G)'s for the group
exceeds this configured threshold.
A row creation attempt will fail if this object is not explicitly set
to a value."
::= { vRtrPimNgDataMtThdEntry 6 }
vRtrPimNgDataMtSpmsiAddRxThd OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtSpmsiAddRxThd specifies the number of
receiver PEs for creating a S-PMSI.
S-PMSI is created when the bandwidth threshold value specified by
vRtrPimNgDataMtThd is reached and the number of receiver PEs drops
below the value specified by vRtrPimNgDataMtSpmsiAddRxThd , once it
has crossed vRtrPimNgDataMtSpmsiDelRxThd."
DEFVAL { 65535 }
::= { vRtrPimNgDataMtThdEntry 7 }
vRtrPimNgDataMtSpmsiDelRxThd OBJECT-TYPE
SYNTAX Unsigned32 (2..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtSpmsiDelRxThd specifies the number of
receiver PEs for deleting a S-PMSI.
When the number of receiver PEs goes above the value specified by
vRtrPimNgDataMtSpmsiDelRxThd, S-PMSI is deleted and the multicast
group is moved to I-PMSI. It is recommended that
vRtrPimNgDataMtSpmsiDelRxThd to be significantly higher than
vRtrPimNgDataMtSpmsiAddRxThd to avoid creating and deleting S-PMSI as
the receiver PE count fluctuates."
DEFVAL { 65535 }
::= { vRtrPimNgDataMtThdEntry 8 }
vRtrPimNgIfMcacLevelTblLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLevelTblLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgIfMcacLevelTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 26 }
vRtrPimNgIfMcacLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfMcacLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrPimNgIfMcacLevelTable has an entry for each multicast CAC
policy constraint level configured on this system."
::= { vRtrPimNgProtocolObjs 27 }
vRtrPimNgIfMcacLevelEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfMcacLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a particular multicast CAC policy level
constraints. Entries are created/deleted by the user."
INDEX {
vRtrID,
vRtrIfIndex,
tmnxMcacLevelId
}
::= { vRtrPimNgIfMcacLevelTable 1 }
VRtrPimNgIfMcacLevelEntry ::= SEQUENCE
{
vRtrPimNgIfMcacLevelRowStatus RowStatus,
vRtrPimNgIfMcacLvlRowLstChngd TimeStamp,
vRtrPimNgIfMcacLevelBW Unsigned32
}
vRtrPimNgIfMcacLevelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLevelRowStatus is used for
creation/deletion of level constraint in a CAC policy."
::= { vRtrPimNgIfMcacLevelEntry 1 }
vRtrPimNgIfMcacLvlRowLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLvlRowLstChngd indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgIfMcacLevelEntry 2 }
vRtrPimNgIfMcacLevelBW OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
UNITS "kilobps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLevelBW specifies the bandwidth in
kilobits per second(kbps) for the level."
DEFVAL { 1 }
::= { vRtrPimNgIfMcacLevelEntry 3 }
vRtrPimNgIfMcacLagTableLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLagTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgIfMcacLagTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 28 }
vRtrPimNgIfMcacLagTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfMcacLagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrPimNgIfMcacLagTable has an entry for each lag port configured
for a multicast CAC policy bundle on this system."
::= { vRtrPimNgProtocolObjs 29 }
vRtrPimNgIfMcacLagEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfMcacLagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a particular multicast CAC lag port
constraints. Entries are created/deleted by the user."
INDEX {
vRtrID,
vRtrIfIndex,
tmnxMcacLagPortsDown
}
::= { vRtrPimNgIfMcacLagTable 1 }
VRtrPimNgIfMcacLagEntry ::= SEQUENCE
{
vRtrPimNgIfMcacLagRowStatus RowStatus,
vRtrPimNgIfMcacLagRowLstChngd TimeStamp,
vRtrPimNgIfMcacLagLevel Unsigned32
}
vRtrPimNgIfMcacLagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLagRowStatus is used for creation/deletion
of lag constraint in a CAC policy."
::= { vRtrPimNgIfMcacLagEntry 1 }
vRtrPimNgIfMcacLagRowLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLagRowLstChngd indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgIfMcacLagEntry 2 }
vRtrPimNgIfMcacLagLevel OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacLagLevel specifies the level id to use
when the value of tmnxMcacLagPortsDown matches the actual number of
ports down in a lag.
Using the value of vRtrPimNgIfMcacLagLevel as an index, the
operational interface unconstrained bandwidth will be set to
vRtrPimNgIfMcacLevelBW.
By default for all lag constraints the interface level will be set to
1 at row creation."
DEFVAL { 1 }
::= { vRtrPimNgIfMcacLagEntry 3 }
vRtrPimNgERPGrpPrfxTblLstChnged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgERPGrpPrfxTblLstChnged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgERPGrpPrefixTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 30 }
vRtrPimNgERPGrpPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgERPGrpPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgERPGrpPrefixTable lists the group ranges for embedded RP
address information. RP address information can only be embedded in
the IPv6 multicast group addresses.
Multicast groups in the default group range (FF70::/12 to FFF0::/12)
are always checked for embedded RP address information."
::= { vRtrPimNgProtocolObjs 31 }
vRtrPimNgERPGrpPrefixEntry OBJECT-TYPE
SYNTAX VRtrPimNgERPGrpPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgERPGrpPrefixTable. Each entry represents the
group range for embedded RP address information."
INDEX {
vRtrID,
vRtrPimNgERPGrpPrfixGrpAddrType,
vRtrPimNgERPGrpPrefixGrpAddr,
vRtrPimNgERPGrpPrefixGrpMask
}
::= { vRtrPimNgERPGrpPrefixTable 1 }
VRtrPimNgERPGrpPrefixEntry ::= SEQUENCE
{
vRtrPimNgERPGrpPrfixGrpAddrType InetAddressType,
vRtrPimNgERPGrpPrefixGrpAddr InetAddress,
vRtrPimNgERPGrpPrefixGrpMask InetAddressPrefixLength,
vRtrPimNgERPGrpPrefixRowStatus RowStatus
}
vRtrPimNgERPGrpPrfixGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgERPGrpPrfixGrpAddrType indicates the type of
address represented by vRtrPimNgERPGrpPrefixGrpAddr."
::= { vRtrPimNgERPGrpPrefixEntry 1 }
vRtrPimNgERPGrpPrefixGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgERPGrpPrefixGrpAddr combined with the value of
vRtrPimNgERPGrpPrefixGrpMask indicates the range of multicast group
addresses for which RP address information can be embedded."
::= { vRtrPimNgERPGrpPrefixEntry 2 }
vRtrPimNgERPGrpPrefixGrpMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgERPGrpPrefixGrpMask indicates the mask which is
combined with the value of vRtrPimNgERPGrpPrefixGrpAddr to get the
range of multicast group addresses for which RP address information
can be embedded."
::= { vRtrPimNgERPGrpPrefixEntry 3 }
vRtrPimNgERPGrpPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgERPGrpPrefixRowStatus is used to create or
destroy entries in this table."
::= { vRtrPimNgERPGrpPrefixEntry 4 }
vRtrPimNgRsvpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgRsvpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the interfaces on which PIM protocol operation is
enabled."
::= { vRtrPimNgProtocolObjs 32 }
vRtrPimNgRsvpIfEntry OBJECT-TYPE
SYNTAX VRtrPimNgRsvpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgRsvpIfTable represents a tunnel interface on
this router that participates in the PIM protocol. Entries can be created and
deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrPimNgRsvpIfLspName,
vRtrPimNgRsvpIfSenderAddrType,
vRtrPimNgRsvpIfSenderAddr
}
::= { vRtrPimNgRsvpIfTable 1 }
VRtrPimNgRsvpIfEntry ::= SEQUENCE
{
vRtrPimNgRsvpIfLspName TNamedItem,
vRtrPimNgRsvpIfSenderAddrType InetAddressType,
vRtrPimNgRsvpIfSenderAddr InetAddress,
vRtrPimNgRsvpIfRowStatus RowStatus,
vRtrPimNgRsvpIfOperState TmnxOperState,
vRtrPimNgRsvpIfIndex InterfaceIndex
}
vRtrPimNgRsvpIfLspName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIfLspName indicates the name of the RSVP
point to multipoint (P2MP) lsp name associated with this tunnel
interface."
::= { vRtrPimNgRsvpIfEntry 1 }
vRtrPimNgRsvpIfSenderAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIfSenderAddrType indicates the type for
vRtrPimNgRsvpIfSenderAddr."
::= { vRtrPimNgRsvpIfEntry 2 }
vRtrPimNgRsvpIfSenderAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIfSenderAddr indicates the sender address."
::= { vRtrPimNgRsvpIfEntry 3 }
vRtrPimNgRsvpIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIfRowStatus is used to create or delete an
entry."
::= { vRtrPimNgRsvpIfEntry 4 }
vRtrPimNgRsvpIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIfOperState indicates the current
operational state of PIM protocol on this interface."
::= { vRtrPimNgRsvpIfEntry 5 }
vRtrPimNgRsvpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique value of vRtrPimNgRsvpIfIndex identifies this tunnel
interface for this virtual router in the Nokia SROS system.
It is a unique value among entries with the same value of vRtrID."
::= { vRtrPimNgRsvpIfEntry 6 }
vRtrPimNgCRPGpPfxInetTblLstChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPGpPfxInetTblLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgCRPGrpPrefixInetTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgProtocolObjs 33 }
vRtrPimNgCRPGrpPrefixInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgCRPGrpPrefixInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgCRPGrpPrefixInetTable lists the group prefixes for which the
router sends the Candidate RP Advertisement."
::= { vRtrPimNgProtocolObjs 34 }
vRtrPimNgCRPGrpPrefixInetEntry OBJECT-TYPE
SYNTAX VRtrPimNgCRPGrpPrefixInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgCRPGrpPrefixInetTable. Each entry represents
the group prefix for which the router sends the Candidate RP
Advertisement(CRP-Adv). CRP-Adv messages are sent to the Elected BSR
router(E-BSR)."
INDEX {
vRtrID,
vRtrPimNgCRPGrpPfxInetGrpAdrType,
vRtrPimNgCRPGrpPrefixInetGrpAddr,
vRtrPimNgCRPGrpPrefixInetGrpMask
}
::= { vRtrPimNgCRPGrpPrefixInetTable 1 }
VRtrPimNgCRPGrpPrefixInetEntry ::= SEQUENCE
{
vRtrPimNgCRPGrpPfxInetGrpAdrType InetAddressType,
vRtrPimNgCRPGrpPrefixInetGrpAddr InetAddress,
vRtrPimNgCRPGrpPrefixInetGrpMask InetAddressPrefixLength,
vRtrPimNgCRPGrpPrfxInetRowStatus RowStatus,
vRtrPimNgCRPGrpPfxInetRowLstChgd TimeStamp
}
vRtrPimNgCRPGrpPfxInetGrpAdrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPGrpPfxInetGrpAdrType indicates the type of
address represented by vRtrPimNgCRPGrpPrefixInetGrpAddr.The value
'unknown (0)' is not valid for this index object."
::= { vRtrPimNgCRPGrpPrefixInetEntry 1 }
vRtrPimNgCRPGrpPrefixInetGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrefixInetGrpAddr combined with the value
of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the range of multicast
group addresses for which the router advertises to be the Candidate
RP. The value of vRtrPimNgAFGenCRPAddress is sent as the RP address."
::= { vRtrPimNgCRPGrpPrefixInetEntry 2 }
vRtrPimNgCRPGrpPrefixInetGrpMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the mask which
is combined with the value of vRtrPimNgCRPGrpPrefixInetGrpAddr to get
the range of multicast group addresses for which the router advertises
to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent
as the RP address."
::= { vRtrPimNgCRPGrpPrefixInetEntry 3 }
vRtrPimNgCRPGrpPrfxInetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPGrpPrfxInetRowStatus specifies the row status
of the group prefix entry for the Candidate RP Advertisement. Row
status is used for creation and deletion of
vRtrPimNgCRPGrpPrefixInetTable entries."
::= { vRtrPimNgCRPGrpPrefixInetEntry 4 }
vRtrPimNgCRPGrpPfxInetRowLstChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPGrpPfxInetRowLstChgd indicates the sysUpTime
when this row was last modified."
::= { vRtrPimNgCRPGrpPrefixInetEntry 5 }
vRtrPimNgCRPInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgCRPInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgCRPInetTable lists the C-RPs and the group prefixes sent in
the C-RP advertisement. vRtrPimNgCRPInetTable will be empty on all
routers except the elected BSR router."
::= { vRtrPimNgProtocolObjs 35 }
vRtrPimNgCRPInetEntry OBJECT-TYPE
SYNTAX VRtrPimNgCRPInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgCRPInetTable. It is created when the Elected
BSR receives a Candidate-RP Advertisement from the C-RPs."
INDEX {
vRtrID,
vRtrPimNgCRPInetAddressType,
vRtrPimNgCRPInetAddress,
vRtrPimNgCRPInetGrpAddrType,
vRtrPimNgCRPInetGrpAddr,
vRtrPimNgCRPInetGrpMask
}
::= { vRtrPimNgCRPInetTable 1 }
VRtrPimNgCRPInetEntry ::= SEQUENCE
{
vRtrPimNgCRPInetAddressType InetAddressType,
vRtrPimNgCRPInetAddress InetAddress,
vRtrPimNgCRPInetGrpAddrType InetAddressType,
vRtrPimNgCRPInetGrpAddr InetAddress,
vRtrPimNgCRPInetGrpMask InetAddressPrefixLength,
vRtrPimNgCRPInetHoldtime Integer32,
vRtrPimNgCRPInetPriority Integer32,
vRtrPimNgCRPInetExpiryTime Integer32
}
vRtrPimNgCRPInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetAddressType indicates the type of address
of the Candidate RP."
::= { vRtrPimNgCRPInetEntry 1 }
vRtrPimNgCRPInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetAddress indicates the Candidate RP
address."
::= { vRtrPimNgCRPInetEntry 2 }
vRtrPimNgCRPInetGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetGrpAddrType indicates the type of the
address represented by vRtrPimNgCRPInetGrpAddr."
::= { vRtrPimNgCRPInetEntry 3 }
vRtrPimNgCRPInetGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetGrpAddr combined with the value of
vRtrPimNgCRPInetGrpMask indicates the range of multicast group
addresses for which vRtrPimNgCRPInetAddress is the Candidate RP."
::= { vRtrPimNgCRPInetEntry 4 }
vRtrPimNgCRPInetGrpMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetGrpMask indicates the mask which is
combined with vRtrPimNgCRPInetGrpAddr to get the range of multicast
group addresses for which vRtrPimNgCRPInetAddress is the Candidate RP."
::= { vRtrPimNgCRPInetEntry 5 }
vRtrPimNgCRPInetHoldtime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetHoldtime indicates the hold time of the
candidate RP. It is used by the bootstrap router to timeout the RP
entries if it does not listen to another C-RP advertisement within the
holdtime period."
::= { vRtrPimNgCRPInetEntry 6 }
vRtrPimNgCRPInetPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is used to
elect RP for a group range. A value of 0 is considered as the highest
priority."
::= { vRtrPimNgCRPInetEntry 7 }
vRtrPimNgCRPInetExpiryTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgCRPInetExpiryTime indicates the minimum time
remaining before the Candidate-RP will be declared down. If the local
router is not the BSR, this value is 0."
::= { vRtrPimNgCRPInetEntry 8 }
vRtrPimNgRPSetInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgRPSetInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the RP Set sent by the Elected BSR in the
Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent in
case of Auto-RP. It also contains the static entries in
vRtrPimNgStGrptoRPTable. The router uses this table to calculate the
group-to-RP mappings."
::= { vRtrPimNgProtocolObjs 36 }
vRtrPimNgRPSetInetEntry OBJECT-TYPE
SYNTAX VRtrPimNgRPSetInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgRPSetInetTable. It is created by the elected
BSR when it receives the Candidate-RP-Adv messages. Other routers
create this entry on receiving Bootstrap Message(BSM) sent by the
elected BSR router. It can also be created when a router receives a
Mapping message from the Auto-RP Mapping Agent."
INDEX {
vRtrID,
vRtrPimNgRPSetInetType,
vRtrPimNgRPSetInetGrpAddrType,
vRtrPimNgRPSetInetGrpAddr,
vRtrPimNgRPSetInetGrpMask,
vRtrPimNgRPSetInetCRPAddrType,
vRtrPimNgRPSetInetCRPAddress
}
::= { vRtrPimNgRPSetInetTable 1 }
VRtrPimNgRPSetInetEntry ::= SEQUENCE
{
vRtrPimNgRPSetInetType INTEGER,
vRtrPimNgRPSetInetGrpAddrType InetAddressType,
vRtrPimNgRPSetInetGrpAddr InetAddress,
vRtrPimNgRPSetInetGrpMask InetAddressPrefixLength,
vRtrPimNgRPSetInetCRPAddrType InetAddressType,
vRtrPimNgRPSetInetCRPAddress InetAddress,
vRtrPimNgRPSetInetHoldtime Integer32,
vRtrPimNgRPSetInetPriority Integer32,
vRtrPimNgRPSetInetExpiryTime Unsigned32
}
vRtrPimNgRPSetInetType OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
static (2),
auto-rp (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrPimNgRPSetInetType is an index into this table. It indicates
whether the entry was learned through the bootstrap mechanism, the
Auto-RP mechanism or if it was statically configured using the
vRtrPimNgStGrptoRPTable."
::= { vRtrPimNgRPSetInetEntry 1 }
vRtrPimNgRPSetInetGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetGrpAddrType indicates the type of
address represented by vRtrPimNgRPSetInetGrpAddr."
::= { vRtrPimNgRPSetInetEntry 2 }
vRtrPimNgRPSetInetGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetGrpAddr, combined with the value of
vRtrPimNgRPSetInetGrpMask, indicates the range of multicast group
addresses for which vRtrPimNgRPSetInetCRPAddress is the Candidate RP."
::= { vRtrPimNgRPSetInetEntry 3 }
vRtrPimNgRPSetInetGrpMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetGrpMask indicates the mask which is
combined with vRtrPimNgRPSetInetGrpAddr to get the range of multicast
group addresses for which vRtrPimNgRPSetInetCRPAddress is the
candidate RP."
::= { vRtrPimNgRPSetInetEntry 4 }
vRtrPimNgRPSetInetCRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetCRPAddrType indicates the type of
address of the Candidate RP address."
::= { vRtrPimNgRPSetInetEntry 5 }
vRtrPimNgRPSetInetCRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetCRPAddress indicates the Candidate RP
address."
::= { vRtrPimNgRPSetInetEntry 6 }
vRtrPimNgRPSetInetHoldtime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetHoldtime indicates the hold time of the
candidate RP. It is used by the bootstrap router to timeout the RP
entries if it does not listen to another C-RP advertisement within the
holdtime period. The value of vRtrPimNgRPSetInetHoldtime will be zero
for static entries."
::= { vRtrPimNgRPSetInetEntry 7 }
vRtrPimNgRPSetInetPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is used to
elect RP for a group range. A value of 0 is considered as the highest
priority. For static entries, the priority is always 1."
::= { vRtrPimNgRPSetInetEntry 8 }
vRtrPimNgRPSetInetExpiryTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRPSetInetExpiryTime indicates the minimum time
remaining before the RP Set group prefix will be declared down."
::= { vRtrPimNgRPSetInetEntry 9 }
vRtrPimNgGrpSrcHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGrpSrcHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the PIM enabled hosts for an entry in
vRtrPimNgGrpSrcTable."
::= { vRtrPimNgProtocolObjs 37 }
vRtrPimNgGrpSrcHostEntry OBJECT-TYPE
SYNTAX VRtrPimNgGrpSrcHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgGrpSrcHostTable. Each entry represents the
state of the PIM enabled host for every vRtrPimNgGrpSrcEntry."
INDEX {
vRtrID,
vRtrPimNgGrpSrcGrpAddrType,
vRtrPimNgGrpSrcGroupAddress,
vRtrPimNgGrpSrcSrcAddrType,
vRtrPimNgGrpSrcSourceAddress,
vRtrPimNgGrpSrcHostAddrType,
vRtrPimNgGrpSrcHostAddress
}
::= { vRtrPimNgGrpSrcHostTable 1 }
VRtrPimNgGrpSrcHostEntry ::= SEQUENCE
{
vRtrPimNgGrpSrcHostAddrType InetAddressType,
vRtrPimNgGrpSrcHostAddress InetAddress,
vRtrPimNgGrpSrcHostFlags BITS
}
vRtrPimNgGrpSrcHostAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcHostAddrType indicates the type of IP
multicast host address represented by vRtrPimNgGrpSrcHostAddress."
::= { vRtrPimNgGrpSrcHostEntry 1 }
vRtrPimNgGrpSrcHostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcHostAddress indicates the IP multicast
host address for which this entry contains information. If the
vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will be
zero and vRtrPimNgGrpSrcHostAddress will contain the address of the
RP."
::= { vRtrPimNgGrpSrcHostEntry 2 }
vRtrPimNgGrpSrcHostFlags OBJECT-TYPE
SYNTAX BITS {
immediateOifList (0),
inheritedOifList (1),
inheritedRptOifList (2),
localRxInclude (3),
localRxExclude (4),
joinPruneList (5),
lostAssertList (6),
sgRptPruneOifList (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcHostFlags indicates the different lists
that this host belongs to."
::= { vRtrPimNgGrpSrcHostEntry 3 }
vRtrPimNgGrpSrcGrpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgGrpSrcGrpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the PIM enabled group-interfaces for an entry in
vRtrPimNgGrpSrcTable."
::= { vRtrPimNgProtocolObjs 38 }
vRtrPimNgGrpSrcGrpIfEntry OBJECT-TYPE
SYNTAX VRtrPimNgGrpSrcGrpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgGrpSrcGrpIfTable. Each entry represents the
state of the PIM enabled group-interfaces for every
vRtrPimNgGrpSrcEntry."
INDEX {
vRtrID,
vRtrPimNgGrpSrcGrpAddrType,
vRtrPimNgGrpSrcGroupAddress,
vRtrPimNgGrpSrcSrcAddrType,
vRtrPimNgGrpSrcSourceAddress,
vRtrPimNgGrpSrcGrpIfFwdSvcId,
vRtrPimNgGrpSrcGrpIfIndex,
sapPortId,
sapEncapValue
}
::= { vRtrPimNgGrpSrcGrpIfTable 1 }
VRtrPimNgGrpSrcGrpIfEntry ::= SEQUENCE
{
vRtrPimNgGrpSrcGrpIfFwdSvcId TmnxServId,
vRtrPimNgGrpSrcGrpIfIndex InterfaceIndex,
vRtrPimNgGrpSrcGrpIfFlags BITS
}
vRtrPimNgGrpSrcGrpIfFwdSvcId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGrpIfFwdSvcId specifies the forwarding
service ID for a group-interface in a retailer context."
DEFVAL { 0 }
::= { vRtrPimNgGrpSrcGrpIfEntry 1 }
vRtrPimNgGrpSrcGrpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique value which identifies this group-interface of this virtual
router in the Tmnx system. This field provides an identifier for
virtual router interfaces similar to the ifIndex values used in the
mib-2 interfaces table for physical interfaces.
The vRtrPimNgGrpSrcGrpIfIndex values can be reused for different
virtual routers, but are unique within those entries with the same
vRtrID.
The vRtrPimNgGrpSrcGrpIfIndex value for each virtual interface must
remain constant at least from one re-initialization of the system
management processor to the next."
::= { vRtrPimNgGrpSrcGrpIfEntry 2 }
vRtrPimNgGrpSrcGrpIfFlags OBJECT-TYPE
SYNTAX BITS {
immediateOifList (0),
inheritedOifList (1),
inheritedRptOifList (2),
localRxInclude (3),
localRxExclude (4),
joinPruneList (5),
lostAssertList (6),
sgRptPruneOifList (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgGrpSrcGrpIfFlags indicates the different lists
that this group-interface belongs to."
::= { vRtrPimNgGrpSrcGrpIfEntry 3 }
vRtrPimNgMvpnUMHPETblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgMvpnUMHPETblLastChg indicates the
time of the last change to any row of vRtrPimNgMvpnUMHPETable."
::= { vRtrPimNgProtocolObjs 39 }
vRtrPimNgMvpnUMHPETable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgMvpnUMHPEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the mapping between primary and standby peers to
support MVPN source redundancy."
::= { vRtrPimNgProtocolObjs 40 }
vRtrPimNgMvpnUMHPEEntry OBJECT-TYPE
SYNTAX VRtrPimNgMvpnUMHPEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgMvpnUMHPETable. Each row represents the
standby peer address configured for a primary peer in MVPN."
INDEX {
vRtrID,
vRtrPimNgMvpnUMHPEAddrType,
vRtrPimNgMvpnUMHPEAddr
}
::= { vRtrPimNgMvpnUMHPETable 1 }
VRtrPimNgMvpnUMHPEEntry ::= SEQUENCE
{
vRtrPimNgMvpnUMHPEAddrType InetAddressType,
vRtrPimNgMvpnUMHPEAddr InetAddress,
vRtrPimNgMvpnUMHPERowStatus RowStatus,
vRtrPimNgMvpnUMHPELastChanged TimeStamp,
vRtrPimNgMvpnUMHPEStandbyAdrTyp InetAddressType,
vRtrPimNgMvpnUMHPEStandbyAddr InetAddress
}
vRtrPimNgMvpnUMHPEAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnUMHPEAddrType indicates the type of the
address assigned to a primary PE indicated by vRtrPimNgMvpnUMHPEAddr."
::= { vRtrPimNgMvpnUMHPEEntry 1 }
vRtrPimNgMvpnUMHPEAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnUMHPEAddr indicates the value of the address
assigned to the primary PE to be used in UMH selection for MVPN source
redundancy."
::= { vRtrPimNgMvpnUMHPEEntry 2 }
vRtrPimNgMvpnUMHPERowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnUMHPERowStatus specifies the Row status of
this table row. This object is used to create or delete rows in this
table."
::= { vRtrPimNgMvpnUMHPEEntry 3 }
vRtrPimNgMvpnUMHPELastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnUMHPELastChanged indicates the timestamp of
the last change to this row in vRtrPimNgMvpnUMHPETable."
::= { vRtrPimNgMvpnUMHPEEntry 4 }
vRtrPimNgMvpnUMHPEStandbyAdrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnUMHPEStandbyAdrTyp specifies the type of the
address assigned to the standby PE indicated by
vRtrPimNgMvpnUMHPEStandbyAddr. This object MUST be specified at row
creation time."
DEFVAL { unknown }
::= { vRtrPimNgMvpnUMHPEEntry 5 }
vRtrPimNgMvpnUMHPEStandbyAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnUMHPEStandbyAddr specifies the value of the
address assigned to a standby PE to be used in UMH selection for MVPN
source redundancy. This value cannot be modified without shutting down
the MVPN instance.
An address instance of 'vRtrPimNgMvpnUMHPEStandbyAddr' can be
associated with only a single address instance of
'vRtrPimNgMvpnUMHPEAddr' or in other words the pairing must be unique.
This object MUST be specified at row creation time."
DEFVAL { ''H }
::= { vRtrPimNgMvpnUMHPEEntry 6 }
vRtrPimNgMvpnSrcPrefixTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnSrcPrefixTblLstChg indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgMvpnSrcPrefixTable."
::= { vRtrPimNgProtocolObjs 41 }
vRtrPimNgMvpnSrcPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgMvpnSrcPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the source prefixes and related information."
::= { vRtrPimNgProtocolObjs 42 }
vRtrPimNgMvpnSrcPrefixEntry OBJECT-TYPE
SYNTAX VRtrPimNgMvpnSrcPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry in the vRtrPimNgMvpnSrcPrefixTable. Each entry
represents a source prefix."
INDEX {
vRtrID,
vRtrPimNgMvpnSrcPrefixType,
vRtrPimNgMvpnSrcPrefixAddr,
vRtrPimNgMvpnSrcPrefixLen
}
::= { vRtrPimNgMvpnSrcPrefixTable 1 }
VRtrPimNgMvpnSrcPrefixEntry ::= SEQUENCE
{
vRtrPimNgMvpnSrcPrefixType InetAddressType,
vRtrPimNgMvpnSrcPrefixAddr InetAddress,
vRtrPimNgMvpnSrcPrefixLen InetAddressPrefixLength,
vRtrPimNgMvpnSrcPrefixRowStatus RowStatus,
vRtrPimNgMvpnSrcPrefixRowLastChg TimeStamp
}
vRtrPimNgMvpnSrcPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnSrcPrefixType indicates the address type of
source prefix address represented by vRtrPimNgMvpnSrcPrefixAddr."
::= { vRtrPimNgMvpnSrcPrefixEntry 1 }
vRtrPimNgMvpnSrcPrefixAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnSrcPrefixAddr indicates the IP address for
which this entry contains information."
::= { vRtrPimNgMvpnSrcPrefixEntry 2 }
vRtrPimNgMvpnSrcPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnSrcPrefixLen indicates the prefix length for
vRtrPimNgMvpnSrcPrefixAddr."
::= { vRtrPimNgMvpnSrcPrefixEntry 3 }
vRtrPimNgMvpnSrcPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnSrcPrefixRowStatus specifies the row status
of this table row. This object is used to create or delete rows in
this table."
::= { vRtrPimNgMvpnSrcPrefixEntry 4 }
vRtrPimNgMvpnSrcPrefixRowLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnSrcPrefixRowLastChg indicates the timestamp
of the last change to this row in vRtrPimNgMvpnSrcPrefixTable."
::= { vRtrPimNgMvpnSrcPrefixEntry 5 }
vRtrPimNgExtranetCDTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDTblLstChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrPimNgExtranetCDTable."
::= { vRtrPimNgProtocolObjs 43 }
vRtrPimNgExtranetCDTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgExtranetCDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the group prefix and related information for PIM core
diversity."
::= { vRtrPimNgProtocolObjs 44 }
vRtrPimNgExtranetCDEntry OBJECT-TYPE
SYNTAX VRtrPimNgExtranetCDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry in the vRtrPimNgExtranetCDTable. Each entry
represents a group prefix for PIM core diversity."
INDEX {
vRtrID,
vRtrPimNgExtranetCDGrpPfxType,
vRtrPimNgExtranetCDGrpPfxAddr,
vRtrPimNgExtranetCDGrpPfxLen
}
::= { vRtrPimNgExtranetCDTable 1 }
VRtrPimNgExtranetCDEntry ::= SEQUENCE
{
vRtrPimNgExtranetCDGrpPfxType InetAddressType,
vRtrPimNgExtranetCDGrpPfxAddr InetAddress,
vRtrPimNgExtranetCDGrpPfxLen InetAddressPrefixLength,
vRtrPimNgExtranetCDMvpnId Unsigned32,
vRtrPimNgExtranetCDRowStatus RowStatus,
vRtrPimNgExtranetCDRowLstChg TimeStamp,
vRtrPimNgExtranetCDStarGFlag TruthValue
}
vRtrPimNgExtranetCDGrpPfxType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDGrpPfxType indicates the address type
of core diversity group prefix address represented by
vRtrPimNgExtranetCDGrpPfxAddr."
::= { vRtrPimNgExtranetCDEntry 1 }
vRtrPimNgExtranetCDGrpPfxAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDGrpPfxAddr indicates the IP address
for which this entry contains information."
::= { vRtrPimNgExtranetCDEntry 2 }
vRtrPimNgExtranetCDGrpPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDGrpPfxLen indicates the prefix length
for vRtrPimNgExtranetCDGrpPfxAddr."
::= { vRtrPimNgExtranetCDEntry 3 }
vRtrPimNgExtranetCDMvpnId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDMvpnId specifies the core diversity
MVPN ID."
::= { vRtrPimNgExtranetCDEntry 4 }
vRtrPimNgExtranetCDRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDRowStatus specifies the row status of
this table row. This object is used to create or delete rows in this
table.
In order for the row creation to succeed, vRtrPimNgExtranetCDMvpnId
should be set to an appropriate MVPN ID."
::= { vRtrPimNgExtranetCDEntry 5 }
vRtrPimNgExtranetCDRowLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDRowLstChg indicates the timestamp of
the last change to this row in vRtrPimNgExtranetCDTable."
::= { vRtrPimNgExtranetCDEntry 6 }
vRtrPimNgExtranetCDStarGFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgExtranetCDStarGFlag specifies that the group
prefix specified by vRtrPimNgExtranetCDGrpPfxAddr is ready to accept
(*,G) traffic."
DEFVAL { false }
::= { vRtrPimNgExtranetCDEntry 7 }
vRtrPimNgDataMtPlcyTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyTblLstChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrPimNgDataMtPlcyTable."
::= { vRtrPimNgProtocolObjs 45 }
vRtrPimNgDataMtPlcyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgDataMtPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the multistream SPMSIs."
::= { vRtrPimNgProtocolObjs 46 }
vRtrPimNgDataMtPlcyEntry OBJECT-TYPE
SYNTAX VRtrPimNgDataMtPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry in the vRtrPimNgDataMtPlcyTable. Each entry
represents a multistream spmsi."
INDEX {
vRtrID,
vRtrPimNgDataMtPlcyIndex
}
::= { vRtrPimNgDataMtPlcyTable 1 }
VRtrPimNgDataMtPlcyEntry ::= SEQUENCE
{
vRtrPimNgDataMtPlcyIndex Unsigned32,
vRtrPimNgDataMtPlcyRowStatus RowStatus,
vRtrPimNgDataMtPlcyRowLastChg TimeStamp,
vRtrPimNgDataMtPlcyLspTemplate TNamedItemOrEmpty,
vRtrPimNgDataMtPlcyAdminState TmnxAdminState,
vRtrPimNgDataMtPlcyGrpAddrMode INTEGER,
vRtrPimNgDataMtPlcyGrpAddrType InetAddressType,
vRtrPimNgDataMtPlcyGrpAddr InetAddress,
vRtrPimNgDataMtSpmsiStaticPlcy TNamedItemOrEmpty,
vRtrPimNgDataMtSpmsiSRPlcy TruthValue
}
vRtrPimNgDataMtPlcyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyIndex indicates the index id of the
multistream SPMSI."
::= { vRtrPimNgDataMtPlcyEntry 1 }
vRtrPimNgDataMtPlcyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyRowStatus specifies the row status of
this table row. This object is used to create or delete rows in this
table."
::= { vRtrPimNgDataMtPlcyEntry 2 }
vRtrPimNgDataMtPlcyRowLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyRowLastChg indicates the timestamp of
the last change to this row in vRtrPimNgDataMtPlcyTable."
::= { vRtrPimNgDataMtPlcyEntry 3 }
vRtrPimNgDataMtPlcyLspTemplate OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyLspTemplate specifies the LSP template
associated with this multi stream SPMSI."
DEFVAL { ''H }
::= { vRtrPimNgDataMtPlcyEntry 4 }
vRtrPimNgDataMtPlcyAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyAdminState specifies the current
administrative state of this multi stream SPMSI."
DEFVAL { inService }
::= { vRtrPimNgDataMtPlcyEntry 5 }
vRtrPimNgDataMtPlcyGrpAddrMode OBJECT-TYPE
SYNTAX INTEGER {
none (0),
asm (1),
ssm (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyGrpAddrMode specifies which PIM mode
to use, ASM or SSM, for this multistream SPMSI."
DEFVAL { asm }
::= { vRtrPimNgDataMtPlcyEntry 6 }
vRtrPimNgDataMtPlcyGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyGrpAddrType indicates the address type
of group prefix address represented by vRtrPimNgDataMtPlcyGrpAddr."
DEFVAL { unknown }
::= { vRtrPimNgDataMtPlcyEntry 7 }
vRtrPimNgDataMtPlcyGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcyGrpAddr indicates the group prefix
address associated with this multistream SPMSI."
DEFVAL { ''H }
::= { vRtrPimNgDataMtPlcyEntry 8 }
vRtrPimNgDataMtSpmsiStaticPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtSpmsiStaticPlcy specifies the pim static
policy associated with this multi stream SPMSI."
DEFVAL { ''H }
::= { vRtrPimNgDataMtPlcyEntry 9 }
vRtrPimNgDataMtSpmsiSRPlcy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtSpmsiSRPlcy specifies the pim p2mp sr
policy if associated with this multi stream SPMSI."
DEFVAL { false }
::= { vRtrPimNgDataMtPlcyEntry 10 }
vRtrPimNgDataMtPlcySGTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGTblLstChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrPimNgDataMtPlcySGTable."
::= { vRtrPimNgProtocolObjs 47 }
vRtrPimNgDataMtPlcySGTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgDataMtPlcySGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the (S,G)'s associated with each multistream SPMSI."
::= { vRtrPimNgProtocolObjs 48 }
vRtrPimNgDataMtPlcySGEntry OBJECT-TYPE
SYNTAX VRtrPimNgDataMtPlcySGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry in the vRtrPimNgDataMtPlcySGTable. Each entry
represents the (S,G) associated with the multistream spmsi."
INDEX {
vRtrID,
vRtrPimNgDataMtPlcyIndex,
vRtrPimNgDataMtPlcySGGrpPfxType,
vRtrPimNgDataMtPlcySGGrpPfxAddr,
vRtrPimNgDataMtPlcySGGrpPfxLen,
vRtrPimNgDataMtPlcySGSrcPfxType,
vRtrPimNgDataMtPlcySGSrcPfxAddr,
vRtrPimNgDataMtPlcySGSrcPfxLen
}
::= { vRtrPimNgDataMtPlcySGTable 1 }
VRtrPimNgDataMtPlcySGEntry ::= SEQUENCE
{
vRtrPimNgDataMtPlcySGGrpPfxType InetAddressType,
vRtrPimNgDataMtPlcySGGrpPfxAddr InetAddress,
vRtrPimNgDataMtPlcySGGrpPfxLen InetAddressPrefixLength,
vRtrPimNgDataMtPlcySGSrcPfxType InetAddressType,
vRtrPimNgDataMtPlcySGSrcPfxAddr InetAddress,
vRtrPimNgDataMtPlcySGSrcPfxLen InetAddressPrefixLength,
vRtrPimNgDataMtPlcySGRowStatus RowStatus,
vRtrPimNgDataMtPlcySGRowLstChg TimeStamp
}
vRtrPimNgDataMtPlcySGGrpPfxType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGGrpPfxType indicates the address
type of group prefix address represented by
vRtrPimNgDataMtPlcySGGrpPfxAddr."
::= { vRtrPimNgDataMtPlcySGEntry 1 }
vRtrPimNgDataMtPlcySGGrpPfxAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGGrpPfxAddr indicates the group
prefix address associated with this multistream SPMSI."
::= { vRtrPimNgDataMtPlcySGEntry 2 }
vRtrPimNgDataMtPlcySGGrpPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGGrpPfxLen indicates the prefix
length for vRtrPimNgDataMtPlcySGGrpPfxAddr."
::= { vRtrPimNgDataMtPlcySGEntry 3 }
vRtrPimNgDataMtPlcySGSrcPfxType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGSrcPfxType indicates the address
type of source prefix address represented by
vRtrPimNgDataMtPlcySGSrcPfxAddr."
::= { vRtrPimNgDataMtPlcySGEntry 4 }
vRtrPimNgDataMtPlcySGSrcPfxAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGSrcPfxAddr indicates the source
prefix address associated with this multistream SPMSI."
::= { vRtrPimNgDataMtPlcySGEntry 5 }
vRtrPimNgDataMtPlcySGSrcPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGSrcPfxLen indicates the prefix
length for vRtrPimNgDataMtPlcySGSrcPfxAddr."
::= { vRtrPimNgDataMtPlcySGEntry 6 }
vRtrPimNgDataMtPlcySGRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGRowStatus specifies the row status
of this table row. This object is used to create or delete rows in
this table."
::= { vRtrPimNgDataMtPlcySGEntry 7 }
vRtrPimNgDataMtPlcySGRowLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtPlcySGRowLstChg indicates the timestamp of
the last change to this row in vRtrPimNgDataMtPlcySGTable."
::= { vRtrPimNgDataMtPlcySGEntry 8 }
vRtrPimNgIfObjs OBJECT IDENTIFIER ::= { tmnxPimNgObjs 2 }
vRtrPimNgIfTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTableLastChanged indicates the sysUpTime at
the time of the last modification of an entry in the vRtrPimNgIfTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgIfObjs 1 }
vRtrPimNgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the interfaces on which PIM protocol operation is
enabled."
::= { vRtrPimNgIfObjs 2 }
vRtrPimNgIfEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgIfTable represents an interface on
this router that participates in the PIM protocol. An entry in
this table can be created or destroyed by an SNMP SET request to
vRtrPimNgIfRowStatus."
INDEX {
vRtrID,
vRtrIfIndex
}
::= { vRtrPimNgIfTable 1 }
VRtrPimNgIfEntry ::= SEQUENCE
{
vRtrPimNgIfRowStatus RowStatus,
vRtrPimNgIfLastChangeTime TimeStamp,
vRtrPimNgIfAdminState TmnxAdminState,
vRtrPimNgIfOperState TmnxOperState,
vRtrPimNgIfHelloInterval Integer32,
vRtrPimNgIfTrackingSupport TruthValue,
vRtrPimNgIfMulticastSenders INTEGER,
vRtrPimNgIfAutoCreated TruthValue,
vRtrPimNgIfBSMCheckRouterAlert TruthValue,
vRtrPimNgIfHelloMultiplier Unsigned32,
vRtrPimNgIfImprovedAssert TruthValue,
vRtrPimNgIfStickyDR TruthValue,
vRtrPimNgIfStickyDRPriority Unsigned32,
vRtrPimNgIfMaxGroups Unsigned32,
vRtrPimNgIfEnableBfd TruthValue,
vRtrPimNgIfThreeWayHello INTEGER,
vRtrPimNgIfMcacPolicyName TPolicyStatementNameOrEmpty,
vRtrPimNgIfMcacUnconstrainedBW Integer32,
vRtrPimNgIfMcacConstAdminState TmnxAdminState,
vRtrPimNgIfMcacPreRsvdMandBW Integer32,
vRtrPimNgIfMcacinUseMandBw Unsigned32,
vRtrPimNgIfMcacinUseOpnlBw Unsigned32,
vRtrPimNgIfMcacAvailMandBw Unsigned32,
vRtrPimNgIfMcacAvailOpnlBw Unsigned32,
vRtrPimNgIfMcacValuesInTransit TruthValue,
vRtrPimNgIfDRPriority Unsigned32,
vRtrPimNgIfAssertPeriod Integer32,
vRtrPimNgIfInstantPruneEcho TmnxEnabledDisabled,
vRtrPimNgIfIpv6EnableBfd TruthValue,
vRtrPimNgIfP2mpLdpTreeJoin TruthValue,
vRtrPimNgIfExtranetType INTEGER,
vRtrPimNgIfExtranetMvpnId Unsigned32,
vRtrPimNgIfMcacUseLagPortWeight TruthValue,
vRtrPimNgIfP2mpLdpTreeJoinType BITS,
vRtrPimNgIfPmsiType INTEGER,
vRtrPimNgIfMcacIfPolicyName TPolicyStatementNameOrEmpty,
vRtrPimNgIfBierSignalingType BITS,
vRtrPimNgIfBierSigTransportType INTEGER
}
vRtrPimNgIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRowStatus is used to create or delete an
entry."
::= { vRtrPimNgIfEntry 1 }
vRtrPimNgIfLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfLastChangeTime indicates the sysUpTime when
this row was last modified."
::= { vRtrPimNgIfEntry 2 }
vRtrPimNgIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfAdminState specifies the desired
administrative state for PIM protocol on this interface."
DEFVAL { inService }
::= { vRtrPimNgIfEntry 3 }
vRtrPimNgIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfOperState indicates the current operational
state of PIM protocol on this interface."
::= { vRtrPimNgIfEntry 4 }
vRtrPimNgIfHelloInterval OBJECT-TYPE
SYNTAX Integer32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfHelloInterval specifies the frequency at which
PIM Hello messages are transmitted on this interface."
DEFVAL { 30 }
::= { vRtrPimNgIfEntry 5 }
vRtrPimNgIfTrackingSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of vRtrPimNgIfTrackingSupport is set to 'true', the T bit
in the LAN Prune Delay option of the Hello Message is set. This
indicates the router's capability to disable Join message suppression."
DEFVAL { false }
::= { vRtrPimNgIfEntry 6 }
vRtrPimNgIfMulticastSenders OBJECT-TYPE
SYNTAX INTEGER {
auto (0),
always (1),
never (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMulticastSenders specifies the way subnet
matching is done for the data packets coming on this interface from
the multicast senders.
For all interfaces, the default value is 'auto'. It indicates that the
subnet match will happen for packets coming in on this interface. If
the subnet does not match, the packet will be dropped.
If the interface is unnumbered or the host is on a different subnet
than that of the interface, vRtrPimNgIfMulticastSenders should be set
to 'always'. It means that packets will not go through the regular
subnet check and not be dropped on a subnet match.
If PIM Hello messages are received on an interface with
vRtrPimNgIfMulticastSenders set to 'always', they are dropped and a
vRtrPimNgHelloDropped notification is generated.
For broadcast interfaces, if it is required that there be no multicast
senders, vRtrPimNgIfMulticastSenders should be set to 'never'."
DEFVAL { auto }
::= { vRtrPimNgIfEntry 7 }
vRtrPimNgIfAutoCreated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfAutoCreated indicates if this interface was
auto created using vRtrPimNgGenCreateInterfaces object. If the value
of this object is 'true', this interface was auto created. If the
value of this object is 'false', this interface was either not created
automatically or the default values of the auto created interface were
changed."
::= { vRtrPimNgIfEntry 8 }
vRtrPimNgIfBSMCheckRouterAlert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfBSMCheckRouterAlert specifies whether to
enable or disable checking of router alert option in the bootstrap
messages received on this interface."
DEFVAL { false }
::= { vRtrPimNgIfEntry 9 }
vRtrPimNgIfHelloMultiplier OBJECT-TYPE
SYNTAX Unsigned32 (20..100)
UNITS "deci-units"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfHelloMultiplier specifies the multiplier for
determining the holdtime for a PIM neighbor on this interface. The
hello-multiplier in conjunction with the hello-interval will determine
the holdtime for a PIM neighbor.
The formula used to calculate the hello-holdtime based on the
hello-multiplier is - (hello-interval * hello-multiplier) / 10
The hello-multiplier is specified in multiples of 0.1. This allows the
PIMv2 default timeout of 3.5 seconds to be supported."
DEFVAL { 35 }
::= { vRtrPimNgIfEntry 10 }
vRtrPimNgIfImprovedAssert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfImprovedAssert specifies whether to enable or
disable improved assert processing on this interface.
The PIM Assert process establishes a forwarder for a LAN and requires
interaction between the control and forwarding planes. The Assert
process is started when data is received on an outgoing interface.
This could impact performance if data is continuously received on an
outgoing interface.
If this flag is set to 'true', the PIM assert process is done entirely
on the control-plane with no interaction between the control and
forwarding plane."
DEFVAL { true }
::= { vRtrPimNgIfEntry 11 }
vRtrPimNgIfStickyDR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfStickyDR specifies whether to enable or
disable sticky-dr operation on this interface.
If sticky-dr is turned on, the priority in PIM hellos sent on this
interface when elected as DR will be modified to the value configured
in vRtrPimNgIfStickyDRPriority. This is done to avoid the delays in
forwarding caused by DR recovery, when switching back to the old DR on
a LAN when it comes back up.
By enabling sticky-dr on this interface, it will continue to act as
the DR for the LAN even after the old DR comes back up."
DEFVAL { false }
::= { vRtrPimNgIfEntry 12 }
vRtrPimNgIfStickyDRPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfStickyDRPriority specifies the DR priority to
be sent in PIM Hello messages following the election of that interface
as the DR, when sticky-dr operation is enabled.
If sticky-dr is turned off, normal PIM behavior is followed and
vRtrPimNgIfStickyDRPriority is not applicable."
DEFVAL { 1024 }
::= { vRtrPimNgIfEntry 13 }
vRtrPimNgIfMaxGroups OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..16000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMaxGroups specifies the maximum number of
groups for which PIM can have downstream state based on received PIM
Joins on this interface.
This does not include IGMP local receivers on the interface.
When this configuration is changed dynamically to a value lower
than the currently accepted number of groups, the groups that
are already accepted are not deleted. Only new groups will not be
allowed. When this object has a value of 0, there is no limit to the
number of groups."
DEFVAL { 0 }
::= { vRtrPimNgIfEntry 14 }
vRtrPimNgIfEnableBfd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfEnableBfd specifies whether Bi-directional
Forwarding Detection is enabled for Ipv4 on this PIM interface.
When the value is 'true', this PIM interface can establish BFD
sessions and use BFD as a signalling mechanism. When it is 'false', it
cannot use BFD for Ipv4."
DEFVAL { false }
::= { vRtrPimNgIfEntry 15 }
vRtrPimNgIfThreeWayHello OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
enabled (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrPimNgIfThreeWayHello specifies whether to enable or disable the
three way hello.
For all interfaces, the default value is 'disabled'. It specifies that
the standard two way hello is supported. When the value is set to
'enabled' it specifies that the three way hello is supported. However
this will not be compatible with releases 3.0R10, 3.0R11, 4.0R2 and
4.0R3."
DEFVAL { disabled }
::= { vRtrPimNgIfEntry 16 }
vRtrPimNgIfMcacPolicyName OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacPolicyName specifies the name of the
multicast CAC policy.
The multicast cac policy applies the interface cac algorithm if the
channel(group) on this interface is part of the policy as specified in
vRtrPimNgIfMcacPolicyName."
DEFVAL { "" }
::= { vRtrPimNgIfEntry 17 }
vRtrPimNgIfMcacUnconstrainedBW OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..2147483647)
UNITS "kilobps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacUnconstrainedBW specifies the bandwidth
assigned for interface's multicast cac policy traffic in kilobits per
second(kbps).
If the default value of '-1' is set, there is no constraint on
bandwidth allocated at the interface.
If the value of vRtrPimNgIfMcacUnconstrainedBW is set to '0' and if a
multicast cac policy is assigned on the interface, then no group
(channel) from that policy is allowed on that interface."
DEFVAL { -1 }
::= { vRtrPimNgIfEntry 18 }
vRtrPimNgIfMcacConstAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacConstAdminState specifies the
administrative state of the multicast CAC policy's constraints."
DEFVAL { inService }
::= { vRtrPimNgIfEntry 19 }
vRtrPimNgIfMcacPreRsvdMandBW OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..2147483647)
UNITS "kilobps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacPreRsvdMandBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface in
kilobits per second(kbps).
If the value of vRtrPimNgIfMcacUnconstrainedBW is '0', no mandatory
channels are allowed. If the value of vRtrPimNgIfMcacUnconstrainedBW
is '-1', then all mandatory and optional channels are allowed.
If the value of vRtrPimNgIfMcacPreRsvdMandBW is equal to the value of
vRtrPimNgIfMcacUnconstrainedBW, then all the unconstrained bandwidth
on a given interface is allocated to mandatory channels configured
through multicast cac policy on that interface and no optional groups
(channels) are allowed.
The value of vRtrPimNgIfMcacPreRsvdMandBW should always be less than
or equal to that of vRtrPimNgIfMcacUnconstrainedBW. An attempt to set
the value of vRtrPimNgIfMcacPreRsvdMandBW greater than that of
vRtrPimNgIfMcacUnconstrainedBW will result in inconsistent value
error."
DEFVAL { -1 }
::= { vRtrPimNgIfEntry 20 }
vRtrPimNgIfMcacinUseMandBw OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacinUseMandBw indicates the in-use bandwidth
in kilobits per second(kbps) for the mandatory channels for this
protocol interface instance."
::= { vRtrPimNgIfEntry 21 }
vRtrPimNgIfMcacinUseOpnlBw OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacinUseOpnlBw indicates the in-use bandwidth
in kilobits per second(kbps) for the optional channels for this
protocol interface instance."
::= { vRtrPimNgIfEntry 22 }
vRtrPimNgIfMcacAvailMandBw OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacAvailMandBw indicates the pre-reserved
bandwidth in kilobits per second(kbps) for the mandatory channels for
this interface instance."
::= { vRtrPimNgIfEntry 23 }
vRtrPimNgIfMcacAvailOpnlBw OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacAvailOpnlBw indicates the available
bandwidth in kilobits per second(kbps) for this interface instance."
::= { vRtrPimNgIfEntry 24 }
vRtrPimNgIfMcacValuesInTransit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacValuesInTransit indicates that the
operational (available and in-use mandatory or optional) value for the
following objects are in transition due to configuration change:
vRtrPimNgIfMcacAvailMandBw vRtrPimNgIfMcacAvailOpnlBw
vRtrPimNgIfMcacinUseMandBw vRtrPimNgIfMcacinUseOpnlBw
When Multicast CAC Policy is applied on the interface for the join of
the next channel, the operational values will be recalculated and
applied to the above objects and the value for
vRtrPimNgIfMcacValuesInTransit will be set to 'false'.
If the value of vRtrPimNgIfMcacValuesInTransit is 'true' then the
values are in transition."
::= { vRtrPimNgIfEntry 25 }
vRtrPimNgIfDRPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfDRPriority specifies the value sent in PIM
Hello messages and used by routers to elect the Designated Router(DR).
The DR election priority is a 32-bit unsigned number and the
numerically larger priority is always preferred."
DEFVAL { 1 }
::= { vRtrPimNgIfEntry 26 }
vRtrPimNgIfAssertPeriod OBJECT-TYPE
SYNTAX Integer32 (1..300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfAssertPeriod specifies the period in seconds
for periodic refreshes of PIM Assert messages on an interface."
DEFVAL { 60 }
::= { vRtrPimNgIfEntry 27 }
vRtrPimNgIfInstantPruneEcho OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfInstantPruneEcho specifies whether PIM will
send an instant Prune Echo when the upstream router enters
Prune-Pending state on this interface. A Prune Echo is simply a Prune
message sent by the upstream router with its own address in the
Upstream Neighbor Address field. Due to this, all downstream routers
will see the Prune message and they can send a join override if
interested in the group.
This is not only useful on NMBA networks, but also can be used on a
LAN environment to improve reliability."
DEFVAL { disabled }
::= { vRtrPimNgIfEntry 28 }
vRtrPimNgIfIpv6EnableBfd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfIpv6EnableBfd specifies whether Bi-directional
Forwarding Detection is enabled for Ipv6 on this PIM interface.
When the value is 'true', this PIM interface can establish BFD
sessions and use BFD as a signaling mechanism. When it is 'false', it
cannot use BFD for Ipv6."
DEFVAL { false }
::= { vRtrPimNgIfEntry 29 }
vRtrPimNgIfP2mpLdpTreeJoin OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrPimNgIfP2mpLdpTreeJoin specifies whether to join a
P2MP LDP tree towards a multicast source.
When the value is 'true', a multicast join received on an interface is
processed to join a PIM multicast tree and also copied over to LDP to
join the in-band signaled P2MP tree for the same multicast flow. LDP
P2MP tree is setup either to RP (ASM group) or source (SSM group). The
route to the RP or the source of the multicast node is looked up from
the RTM. The next-hop address for the route to RP or source is set as
the root of LDP P2MP tree. When it is 'false', the P2MP LDP tree is
disjoined from the multicast source.
This object has been replaced by vRtrPimNgIfP2mpLdpTreeJoinType in
13.0."
DEFVAL { false }
::= { vRtrPimNgIfEntry 30 }
vRtrPimNgIfExtranetType OBJECT-TYPE
SYNTAX INTEGER {
rx (0),
tx (1),
none (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfExtranetType indicates whether the extranet
interface is of type transmitter or receiver."
::= { vRtrPimNgIfEntry 31 }
vRtrPimNgIfExtranetMvpnId OBJECT-TYPE
SYNTAX Unsigned32 (0..10240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfExtranetMvpnId indicates the id associated
with the extranet interface. If the interface is not an extranet
interface then the value of this object will be '0'."
::= { vRtrPimNgIfEntry 32 }
vRtrPimNgIfMcacUseLagPortWeight OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacUseLagPortWeight specifies if this system
must use the LAG port weight while calculating Multicast CAC
constraints.
The LAG port weight is configured with the object
TIMETRA-LAG-MIB::tLagPortWeightSpeed."
DEFVAL { false }
::= { vRtrPimNgIfEntry 33 }
vRtrPimNgIfP2mpLdpTreeJoinType OBJECT-TYPE
SYNTAX BITS {
ipv4 (0),
ipv6 (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfP2mpLdpTreeJoinType specifies the option to to
join a P2MP LDP tree towards the multicast source. When the value of
this object is set to other than 'none', then a PIM multicast join
received on an interface is processed to join P2MP LDP LSP using the
in-band signaled P2MP tree for the same multicast flow. LDP P2MP tree
is setup towards the multicast source. Route to source of the
multicast node is looked up from the RTM. The next-hop address for the
route to source is set as the root of LDP P2MP tree.
When the value is set to 'ipv4' or 'ipv6', it enables dynamic mLDP
in-band signaling for IPv4 or IPv6 PIM joins respectively. When both
'ipv4' and 'ipv6' are set then it enables dynamic mLDP in-band
signaling for IPv4 and IPv6 PIM joins. When it is 'none', the P2MP LDP
tree is disjoined from the multicast source."
DEFVAL { {} }
::= { vRtrPimNgIfEntry 34 }
vRtrPimNgIfPmsiType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ipmsiTx (1),
ipmsiRx (2),
spmsiTx (3),
spmsiRx (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfPmsiType indicates the type of the tunnel
interface."
::= { vRtrPimNgIfEntry 35 }
vRtrPimNgIfMcacIfPolicyName OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfMcacIfPolicyName specifies the name of the
multicast CAC interface policy.
The multicast cac policy applies the interface cac algorithm if the
channel(group) on this interface is part of the policy as specified in
vRtrPimNgIfMcacIfPolicyName."
DEFVAL { "" }
::= { vRtrPimNgIfEntry 36 }
vRtrPimNgIfBierSignalingType OBJECT-TYPE
SYNTAX BITS {
ipv4 (0),
ipv6 (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfBierSignalingType specifies the option to
to join a P2MP BIER Tunnel towards the multicast source. When the value
of this object is set to other than 'none', then a PIM multicast join
received on an interface is processed to join P2MP BIER Tunnel using
in-band signaling of the PIM joins over the BIER core for the same multicast flow.
P2MP BIER Tunnel is setup towards the multicast source. Route to source of the multicast
node is looked up from the RTM. The next-hop address for the route to
source is set as the root of P2MP BIER Tunnel.
When the value is set to 'ipv4' or 'ipv6', it enables BIER in-band
signaling for IPv4 or IPv6 PIM joins respectively. When both 'ipv4'
and 'ipv6' are set then it enables BIER in-band signaling for IPv4 and
IPv6 PIM joins. When it is 'none', the BIER tunnel is disjoined from
the multicast source."
DEFVAL { {} }
::= { vRtrPimNgIfEntry 37 }
vRtrPimNgIfBierSigTransportType OBJECT-TYPE
SYNTAX INTEGER {
tx (0),
rx (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfBierSigTransportType indicates whether
transport for the bier signaling type is of type transmitter or
receiver."
::= { vRtrPimNgIfEntry 38 }
vRtrPimNgAFIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgAFIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the interfaces on which PIM protocol operation is
enabled."
::= { vRtrPimNgIfObjs 3 }
vRtrPimNgAFIfEntry OBJECT-TYPE
SYNTAX VRtrPimNgAFIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrPimNgAFIfTable represents an interface on
this router that participates in the PIM protocol."
INDEX {
vRtrID,
vRtrIfIndex,
vRtrPimNgAFIfAFType
}
::= { vRtrPimNgAFIfTable 1 }
VRtrPimNgAFIfEntry ::= SEQUENCE
{
vRtrPimNgAFIfAFType TmnxMulticastAddrFamily,
vRtrPimNgAFIfAdminState TmnxAdminState,
vRtrPimNgAFIfOperState TmnxOperState,
vRtrPimNgAFIfMdtDefGrpAddrType InetAddressType,
vRtrPimNgAFIfMdtDefGrpAddress InetAddress,
vRtrPimNgAFIfNextHelloTime Unsigned32,
vRtrPimNgAFIfOperDRPriority Unsigned32,
vRtrPimNgAFIfCurrentGroups Gauge32,
vRtrPimNgAFIfMaxGroupsTillNow Counter32,
vRtrPimNgAFIfDRType InetAddressType,
vRtrPimNgAFIfDR InetAddress,
vRtrPimNgAFIfTrackSprtOperState TruthValue,
vRtrPimNgAFIfOperGroup TNamedItemOrEmpty,
vRtrPimNgAFIfOperGroupDPAction INTEGER,
vRtrPimNgAFIfOpGrpDeltaPriority Unsigned32
}
vRtrPimNgAFIfAFType OBJECT-TYPE
SYNTAX TmnxMulticastAddrFamily
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfAFType indicates the address family type
supported by the PIM on this interface."
::= { vRtrPimNgAFIfEntry 1 }
vRtrPimNgAFIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfAdminState specifies the desired
administrative state associated with this address family for PIM
protocol on this interface."
DEFVAL { inService }
::= { vRtrPimNgAFIfEntry 2 }
vRtrPimNgAFIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfOperState indicates the current operational
state associated with this address family for PIM protocol on this
interface."
::= { vRtrPimNgAFIfEntry 3 }
vRtrPimNgAFIfMdtDefGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfMdtDefGrpAddrType indicates the type of
address represented by vRtrPimNgAFIfMdtDefGrpAddress."
::= { vRtrPimNgAFIfEntry 4 }
vRtrPimNgAFIfMdtDefGrpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfMdtDefGrpAddress indicates the default group
address used for Multicast Distribution Tree (MDT). It is applicable
only when this entry corresponds to a Multicast Tunnel(MT) interface
for a particular VPRN."
::= { vRtrPimNgAFIfEntry 5 }
vRtrPimNgAFIfNextHelloTime OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfNextHelloTime indicates the time in which
the next PIM Hello message will be transmitted on this interface."
::= { vRtrPimNgAFIfEntry 6 }
vRtrPimNgAFIfOperDRPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfOperDRPriority indicates the priority of the
current DR on a LAN. This value is different from the configured PIM
DR priority and is the result of the PIM DR election process.
The value of vRtrPimNgAFIfOperDRPriority will be 0 if the interface is
operationally down and DR election has not taken place."
::= { vRtrPimNgAFIfEntry 7 }
vRtrPimNgAFIfCurrentGroups OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfCurrentGroups indicates the number of groups
that currently have this interface as an outgoing interface."
::= { vRtrPimNgAFIfEntry 8 }
vRtrPimNgAFIfMaxGroupsTillNow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfMaxGroupsTillNow indicates the highest value
that vRtrPimNgAFIfCurrentGroups had till now."
::= { vRtrPimNgAFIfEntry 9 }
vRtrPimNgAFIfDRType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfDRType indicates the type of the address of
the designated Router on this PIM interface."
::= { vRtrPimNgAFIfEntry 10 }
vRtrPimNgAFIfDR OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfDR indicates the Designated Router on this
PIM interface."
::= { vRtrPimNgAFIfEntry 11 }
vRtrPimNgAFIfTrackSprtOperState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfTrackSprtOperState indicates the operational
status of PIM tracking support.
The value of vRtrPimNgAFIfTrackSprtOperState is set to 'inService'
when all PIM routers on a LAN support join or prune tracking."
::= { vRtrPimNgAFIfEntry 12 }
vRtrPimNgAFIfOperGroup OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfOperGroup specifies the operational group
whose state PIM will monitor."
DEFVAL { "" }
::= { vRtrPimNgAFIfEntry 13 }
vRtrPimNgAFIfOperGroupDPAction OBJECT-TYPE
SYNTAX INTEGER {
none (0),
add (1),
subtract (2),
set (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfOperGroupDPAction specifies the action that
needs to be performed on DR priority if the status of the operational
group specified by vRtrPimNgAFIfOperGroup changes to up.
When the value is set to 'add', it specifies that
vRtrPimNgAFIfOpGrpDeltaPriority needs to be added to DR priority.If it
is set to 'subtract', it specifies that
vRtrPimNgAFIfOpGrpDeltaPriority needs to be subtracted from DR
priority. If it is set to 'set', it specifies that DR priority needs
to be set to vRtrPimNgAFIfOpGrpDeltaPriority."
DEFVAL { none }
::= { vRtrPimNgAFIfEntry 14 }
vRtrPimNgAFIfOpGrpDeltaPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrPimNgAFIfOpGrpDeltaPriority specifies the value by
which the DR priority needs to change when the status of the
operational group specified by vRtrPimNgAFIfOperGroup changes to up."
DEFVAL { 0 }
::= { vRtrPimNgAFIfEntry 15 }
vRtrPimNgIfNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the router's PIM neighbors on an interface."
::= { vRtrPimNgIfObjs 4 }
vRtrPimNgIfNeighborEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgIfNeighborTable. Entries in this table cannot
be created or deleted using SNMP."
INDEX {
vRtrID,
vRtrIfIndex,
vRtrPimNgIfNeighborAddressType,
vRtrPimNgIfNeighborAddress
}
::= { vRtrPimNgIfNeighborTable 1 }
VRtrPimNgIfNeighborEntry ::= SEQUENCE
{
vRtrPimNgIfNeighborAddressType InetAddressType,
vRtrPimNgIfNeighborAddress InetAddress,
vRtrPimNgIfNeighborUpTime Unsigned32,
vRtrPimNgIfNeighborExpiryTime Unsigned32,
vRtrPimNgIfNeighborGenId Unsigned32,
vRtrPimNgIfNeighborDrPriority Unsigned32,
vRtrPimNgIfNeighborDrPriorPrsnt TruthValue,
vRtrPimNgIfNeighborLanDelay Unsigned32,
vRtrPimNgIfNeighborLanDlayPrsnt TruthValue,
vRtrPimNgIfNeighborTrckngSpprt TruthValue,
vRtrPimNgIfNeighborHoldTime Unsigned32,
vRtrPimNgIfNeighborOvrdeIntrvl Unsigned32,
vRtrPimNgIfNeighborJASupport TruthValue
}
vRtrPimNgIfNeighborAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborAddressType indicates the type of IP
address of the PIM neighbor."
::= { vRtrPimNgIfNeighborEntry 1 }
vRtrPimNgIfNeighborAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborAddress indicates the IP address of
the PIM neighbor for which this entry contains information."
::= { vRtrPimNgIfNeighborEntry 2 }
vRtrPimNgIfNeighborUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborUpTime indicates the time since this
PIM neighbor (last) became a neighbor of the local router."
::= { vRtrPimNgIfNeighborEntry 3 }
vRtrPimNgIfNeighborExpiryTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborExpiryTime indicates the minimum time
remaining before this PIM neighbor will be aged out. If the value of
this object is zero, it means that this neighbor will never be aged
out. This happens when the PIM neighbor sends a Hello message with
Holdtime set to `0xffff'."
::= { vRtrPimNgIfNeighborEntry 4 }
vRtrPimNgIfNeighborGenId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborGenId indicates a randomly generated
32-bit value that is regenerated each time PIM forwarding is started
or restarted on the interface, including when the router itself
restarts. When a Hello message with a new vRtrPimNgIfNeighborGenId
is received from a neighbor, any old Hello information about that
neighbor is discarded and superseded by the information from the new
Hello message."
::= { vRtrPimNgIfNeighborEntry 5 }
vRtrPimNgIfNeighborDrPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborDrPriority indicates neighbor's DR
priority which is received in the hello message. If the Hello Message
did not contain the DR priority field, the value of this object will
be set to '1' and vRtrPimNgIfNeighborDrPriorPrsnt will be set to
'false'."
::= { vRtrPimNgIfNeighborEntry 6 }
vRtrPimNgIfNeighborDrPriorPrsnt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborDrPriorPrsnt indicates whether the DR
priority field was present in the Hello message received from the PIM
neighbor. If present, the value is set to 'true'."
::= { vRtrPimNgIfNeighborEntry 7 }
vRtrPimNgIfNeighborLanDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborLanDelay indicates the lan delay field
present in the Hello message received from the neighbor. If the
neighbor did not send this field, a default value of 500 ms is used
and the value of vRtrPimNgIfNeighborLanDlayPrsnt is set to 'false'."
::= { vRtrPimNgIfNeighborEntry 8 }
vRtrPimNgIfNeighborLanDlayPrsnt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborLanDlayPrsnt indicates whether the
Hello message received from the neighbor contained the Lan Delay
field. If present, the value is set to 'true'."
::= { vRtrPimNgIfNeighborEntry 9 }
vRtrPimNgIfNeighborTrckngSpprt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborTrckngSpprt indicates whether the T
bit in the LAN Prune Delay option was present in the Hello message.
This indicates the neighbor's capability to disable Join message
suppression."
::= { vRtrPimNgIfNeighborEntry 10 }
vRtrPimNgIfNeighborHoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborHoldTime contains the value of the
hold time present in the Hello message."
::= { vRtrPimNgIfNeighborEntry 11 }
vRtrPimNgIfNeighborOvrdeIntrvl OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborOvrdeIntrvl contains the value of the
override interval present in the Hello message."
::= { vRtrPimNgIfNeighborEntry 12 }
vRtrPimNgIfNeighborJASupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfNeighborJASupport indicates whether the Hello
Message received from the neighbor contained the Join Attribute field.
If it is present, then the value of vRtrPimNgIfNeighborJASupport is
set to 'true'."
::= { vRtrPimNgIfNeighborEntry 13 }
vRtrPimNgIfGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the (*,*,RP), (*,G) and (S,G) and (S,G,rpt) entries
for which this particular interface has state."
::= { vRtrPimNgIfObjs 5 }
vRtrPimNgIfGrpSrcEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgIfGrpSrcTable. This is a read-only table."
INDEX {
vRtrID,
vRtrIfIndex,
vRtrPimNgIfGrpSrcType,
vRtrPimNgIfGrpSrcGroupAddrType,
vRtrPimNgIfGrpSrcGroupAddress,
vRtrPimNgIfGrpSrcSourceAddrType,
vRtrPimNgIfGrpSrcSourceAddress
}
::= { vRtrPimNgIfGrpSrcTable 1 }
VRtrPimNgIfGrpSrcEntry ::= SEQUENCE
{
vRtrPimNgIfGrpSrcType INTEGER,
vRtrPimNgIfGrpSrcGroupAddrType InetAddressType,
vRtrPimNgIfGrpSrcGroupAddress InetAddress,
vRtrPimNgIfGrpSrcSourceAddrType InetAddressType,
vRtrPimNgIfGrpSrcSourceAddress InetAddress,
vRtrPimNgIfGrpSrcRPAddrType InetAddressType,
vRtrPimNgIfGrpSrcRPAddress InetAddress,
vRtrPimNgIfGrpSrcJPState INTEGER,
vRtrPimNgIfGrpSrcPrunePendTimer Unsigned32,
vRtrPimNgIfGrpSrcJoinPruneTimer Unsigned32,
vRtrPimNgIfGrpSrcJPRptState INTEGER,
vRtrPimNgIfGrpSrcRptPrnePendTmr Unsigned32,
vRtrPimNgIfGrpSrcRptJoinPrneTmr Unsigned32,
vRtrPimNgIfGrpSrcAssertState INTEGER,
vRtrPimNgIfGrpSrcAssertTimer Unsigned32,
vRtrPimNgIfGrpSrcAssertMetric Unsigned32,
vRtrPimNgIfGrpSrcAsrtMetricPref Unsigned32,
vRtrPimNgIfGrpSrcAssertRPTBit TruthValue,
vRtrPimNgIfGrpSrcAsrtWinnerMtrc Unsigned32,
vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf Unsigned32,
vRtrPimNgIfGrpSrcAsrtWnrRPTBit TruthValue,
vRtrPimNgIfGrpSrcAsrtWnrAddrTyp InetAddressType,
vRtrPimNgIfGrpSrcAsrtWinnerAddr InetAddress,
vRtrPimNgIfGrpSrcUpTime Unsigned32,
vRtrPimNgIfGrpSrcDataMtIfIndex InterfaceIndexOrZero
}
vRtrPimNgIfGrpSrcType OBJECT-TYPE
SYNTAX INTEGER {
starStarRP (0),
starG (1),
sg (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcType indicates the type of this entry
for this table."
::= { vRtrPimNgIfGrpSrcEntry 1 }
vRtrPimNgIfGrpSrcGroupAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcGroupAddrType indicates the type of
address of the multicast group address."
::= { vRtrPimNgIfGrpSrcEntry 2 }
vRtrPimNgIfGrpSrcGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcGroupAddress indicates the multicast
group address of the entry. It will be zero if the
vRtrPimNgIfGrpSrcType is 'starStarRP'."
::= { vRtrPimNgIfGrpSrcEntry 3 }
vRtrPimNgIfGrpSrcSourceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcSourceAddrType indicates the type of
source address of the multicast sender."
::= { vRtrPimNgIfGrpSrcEntry 4 }
vRtrPimNgIfGrpSrcSourceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcSourceAddress indicates the source
address of the multicast sender. It will be zero if the
vRtrPimNgIfGrpSrcType is 'starG' and it will be the address of the
Rendezvous Point(RP) if the vRtrPimNgIfGrpSrcType is 'starStarRP'."
::= { vRtrPimNgIfGrpSrcEntry 5 }
vRtrPimNgIfGrpSrcRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRPAddrType indicates the type of address
of the Rendezvous Point(RP)."
::= { vRtrPimNgIfGrpSrcEntry 6 }
vRtrPimNgIfGrpSrcRPAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRPAddress indicates the address of the
Rendezvous Point(RP)."
::= { vRtrPimNgIfGrpSrcEntry 7 }
vRtrPimNgIfGrpSrcJPState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (0),
join (1),
prunePend (2),
pruned (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcJPState indicates the Join Prune state
for this entry on the interface. PIM Join or Prune messages are sent
by the downstream routers towards the RPF' neighbor."
::= { vRtrPimNgIfGrpSrcEntry 8 }
vRtrPimNgIfGrpSrcPrunePendTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcPrunePendTimer indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPState to 'noInfo'. The timer is set when the PIM
Prune message is received."
::= { vRtrPimNgIfGrpSrcEntry 9 }
vRtrPimNgIfGrpSrcJoinPruneTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcJoinPruneTimer indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPState to 'noInfo'.
The timer is started or restarted when a valid Join message is
received. If the value of this object is zero and
vRtrPimNgIfGrpSrcJPState is 'join' state, it means that the downstream
router sent a holdtime of '0xffff'. In this case,
vRtrPimNgIfGrpSrcJPState will not transition until an appropriate
cancelling of Join or Prune message is received."
::= { vRtrPimNgIfGrpSrcEntry 10 }
vRtrPimNgIfGrpSrcJPRptState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (0),
join (1),
prunePend (2),
pruned (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcJPRptState indicates the Join Prune Rpt
state for this entry on the interface. PIM Join or Prune messages are
sent by the downstream routers towards the RPF' neighbor. (S,G,rpt)
state is a result of receiving (S,G, rpt) JP message from the
downstream router on the RP tree."
::= { vRtrPimNgIfGrpSrcEntry 11 }
vRtrPimNgIfGrpSrcRptPrnePendTmr OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRptPrnePendTmr indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPRptState to 'noInfo'. The timer is set when the
(S,G,rpt) PIM Prune message is received."
::= { vRtrPimNgIfGrpSrcEntry 12 }
vRtrPimNgIfGrpSrcRptJoinPrneTmr OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRptJoinPrneTmr indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPRptState to 'noInfo'.
The timer is started or restarted when a valid Join message is
received. If the value of this object is zero and
vRtrPimNgIfGrpSrcJPRptState is in 'join' state, it means that the
downstream router sent a holdtime of '0xffff'. In this case,
vRtrPimNgIfGrpSrcJPRptState will not transition until an appropriate
cancelling of Join or Prune message is received from the downstream
router."
::= { vRtrPimNgIfGrpSrcEntry 13 }
vRtrPimNgIfGrpSrcAssertState OBJECT-TYPE
SYNTAX INTEGER {
noInfo (0),
lostAssert (1),
wonAssert (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAssertState indicates the ASSERT state
for this entry. Where multiple PIM routers peer over a shared LAN it
is possible for more than one upstream router to have valid forwarding
state for a packet, which can lead to packet duplication. PIM does not
attempt to prevent this from occurring. Instead it detects when this
has happened and elects a single forwarder amongst the upstream
routers to prevent further duplication. This election is performed
using PIM Assert messages. Assert messages are also received by
downstream routers on the LAN, and these cause subsequent Join or
Prune messages to be sent to the upstream router that won the Assert."
::= { vRtrPimNgIfGrpSrcEntry 14 }
vRtrPimNgIfGrpSrcAssertTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAssertTimer indicates the time remaining
before the router transitions the vRtrPimNgIfGrpSrcAssertState to
'noInfo' if the value of vRtrPimNgIfGrpSrcAssertState is 'lostAssert'.
If the value of vRtrPimNgIfGrpSrcAssertState is 'wonAssert', the value
of vRtrPimNgIfGrpSrcAssertTimer indicates the time remaining before it
resends the ASSERT message."
::= { vRtrPimNgIfGrpSrcEntry 15 }
vRtrPimNgIfGrpSrcAssertMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAssertMetric indicates the metric
associated by the MRIB for the route towards the source or the RP."
::= { vRtrPimNgIfGrpSrcEntry 16 }
vRtrPimNgIfGrpSrcAsrtMetricPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAsrtMetricPref indicates the preference
associated by the MRIB for the route towards the source or the RP."
::= { vRtrPimNgIfGrpSrcEntry 17 }
vRtrPimNgIfGrpSrcAssertRPTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAssertRPTBit is 'true' if the RPT bit is
set and 'false' when the RPT bit is not set."
::= { vRtrPimNgIfGrpSrcEntry 18 }
vRtrPimNgIfGrpSrcAsrtWinnerMtrc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAsrtWinnerMtrc indicates the ASSERT
winner's metric associated by it's MRIB for the route towards the
source or the RP."
::= { vRtrPimNgIfGrpSrcEntry 19 }
vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf indicates the ASSERT
winner's preference associated by it's MRIB for the route towards the
source or the RP."
::= { vRtrPimNgIfGrpSrcEntry 20 }
vRtrPimNgIfGrpSrcAsrtWnrRPTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAsrtWnrRPTBit is 'true' if the RPT bit
is set and 'false' when the RPT bit is not set."
::= { vRtrPimNgIfGrpSrcEntry 21 }
vRtrPimNgIfGrpSrcAsrtWnrAddrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAsrtWnrAddrTyp indicates type of address
of the ASSERT winner's interface IP address."
::= { vRtrPimNgIfGrpSrcEntry 22 }
vRtrPimNgIfGrpSrcAsrtWinnerAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcAsrtWinnerAddr indicates the ASSERT
winner's interface IP address."
::= { vRtrPimNgIfGrpSrcEntry 23 }
vRtrPimNgIfGrpSrcUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcUpTime indicates the time since this
source group entry got created."
::= { vRtrPimNgIfGrpSrcEntry 24 }
vRtrPimNgIfGrpSrcDataMtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcDataMtIfIndex indicates the interface
index of the Multicast Tunnel(MT) interface. If the value of
vRtrPimNgIfGrpSrcDataMtIfIndex is zero, it indicates that there is no
data MT associated with this group-source interface to forward
multicast traffic into the service provider network. If the
value of vRtrPimNgIfGrpSrcDataMtIfIndex is non-zero, it indicates the
data MT tunnel that is used to forward multicast traffic into the
service provider network."
::= { vRtrPimNgIfGrpSrcEntry 25 }
vRtrPimNgIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the PIM statistics for a particular interface."
::= { vRtrPimNgIfObjs 6 }
vRtrPimNgIfStatsEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgIfStatsTable."
AUGMENTS { vRtrPimNgAFIfEntry }
::= { vRtrPimNgIfStatsTable 1 }
VRtrPimNgIfStatsEntry ::= SEQUENCE
{
vRtrPimNgIfTxPkts Counter32,
vRtrPimNgIfTxHellos Counter32,
vRtrPimNgIfTxAsserts Counter32,
vRtrPimNgIfTxRegisterStops Counter32,
vRtrPimNgIfTxRegisterStopErrs Counter32,
vRtrPimNgIfTxBsmPdus Counter32,
vRtrPimNgIfTxBsmErrs Counter32,
vRtrPimNgIfRxPkts Counter32,
vRtrPimNgIfRxHellos Counter32,
vRtrPimNgIfRxHellosDropped Counter32,
vRtrPimNgIfRxNbrUnknown Counter32,
vRtrPimNgIfRxBadChecksumDiscard Counter32,
vRtrPimNgIfRxBadVersionDiscard Counter32,
vRtrPimNgIfRxBadEncodings Counter32,
vRtrPimNgIfRxAsserts Counter32,
vRtrPimNgIfRxAssertErrs Counter32,
vRtrPimNgIfRxRegisters Counter32,
vRtrPimNgIfRxRegisterErrs Counter32,
vRtrPimNgIfRxNullRegisters Counter32,
vRtrPimNgIfRxRegisterStops Counter32,
vRtrPimNgIfRxRegisterStopErrs Counter32,
vRtrPimNgIfRxCRPAdvNoRtrAlert Counter32,
vRtrPimNgIfRxBsmPdus Counter32,
vRtrPimNgIfRxBsmPduDrops Counter32,
vRtrPimNgIfStarStarRPTypes Gauge32,
vRtrPimNgIfStarGTypes Gauge32,
vRtrPimNgIfSGTypes Gauge32,
vRtrPimNgIfJoinPolicyDrops Counter32,
vRtrPimNgIfRegisterPolicyDrops Counter32,
vRtrPimNgIfBtrImpPolicyDrops Counter32,
vRtrPimNgIfBtrExpPolicyDrops Counter32,
vRtrPimNgIfTxJoinPrunes Counter32,
vRtrPimNgIfRxJoinPrunes Counter32,
vRtrPimNgIfRxInvalidJoinPrunes Counter32,
vRtrPimNgIfRxInvalidRegisters Counter32,
vRtrPimNgIfRxUnknownPdus Counter32,
vRtrPimNgIfRxJoinPruneErrs Counter32,
vRtrPimNgIfRxBSMNoRouterAlertDrops Counter32,
vRtrPimNgIfRxBSMWrongIfDrops Counter32,
vRtrPimNgIfMcacPolicyDrops Counter32,
vRtrPimNgIfTxIntraASAD Counter32,
vRtrPimNgIfRxIntraASAD Counter32,
vRtrPimNgIfRxIntraASADErrs Counter32,
vRtrPimNgIfTxInterASAD Counter32,
vRtrPimNgIfRxInterASAD Counter32,
vRtrPimNgIfRxInterASADErrs Counter32,
vRtrPimNgIfTxSpmsiAD Counter32,
vRtrPimNgIfRxSpmsiAD Counter32,
vRtrPimNgIfRxSpmsiADErrs Counter32,
vRtrPimNgIfTxLeafAD Counter32,
vRtrPimNgIfRxLeafAD Counter32,
vRtrPimNgIfRxLeafADErrs Counter32,
vRtrPimNgIfTxSrcActAD Counter32,
vRtrPimNgIfRxSrcActAD Counter32,
vRtrPimNgIfTxSrcActADErrs Counter32,
vRtrPimNgIfTxSharedTreeJoin Counter32,
vRtrPimNgIfRxSharedTreeJoin Counter32,
vRtrPimNgIfRxSharedTreeJoinErrs Counter32,
vRtrPimNgIfTxSrcTreeJoin Counter32,
vRtrPimNgIfRxSrcTreeJoin Counter32,
vRtrPimNgIfRxSrcTreeJoinErrs Counter32,
vRtrPimNgIfTxBgpPkts Counter32,
vRtrPimNgIfRxBgpPkts Counter32,
vRtrPimNgIfTxMdtSafi Counter32,
vRtrPimNgIfRxMdtSafi Counter32,
vRtrPimNgIfRxMdtSafiErrs Counter32,
vRtrPimNgIfRxAutoRpGenErrs Counter32,
vRtrPimNgIfRxAutoRpAnnounce Counter32,
vRtrPimNgIfTxAutoRpAnnounce Counter32,
vRtrPimNgIfRxAutoRpAnnounceErrs Counter32,
vRtrPimNgIfTxAutoRpAnnounceErrs Counter32,
vRtrPimNgIfRxAutoRpMapping Counter32,
vRtrPimNgIfTxAutoRpMapping Counter32,
vRtrPimNgIfRxAutoRpMappingErrs Counter32,
vRtrPimNgIfTxAutoRpMappingErrs Counter32,
vRtrPimNgIfRxJoinPrunesMvpnRpfv Counter32,
vRtrPimNgIfTxJoinPrunesMvpnRpfv Counter32,
vRtrPimNgIfRxInvalidJPMvpnRpfv Counter32,
vRtrPimNgIfGraftsRx Counter32,
vRtrPimNgIfGraftsTx Counter32,
vRtrPimNgIfGraftsRxErrors Counter32,
vRtrPimNgIfGraftsAckRx Counter32,
vRtrPimNgIfGraftsAckTx Counter32,
vRtrPimNgIfGraftsAckRxErrors Counter32,
vRtrPimNgIfRxAutoRpMappingRpfMM Counter32,
vRtrPimNgIfRxAutoRpAnnounceRpfMM Counter32
}
vRtrPimNgIfTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxPkts indicates the number of multicast data
packets transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 1 }
vRtrPimNgIfTxHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxHellos indicates the number of PIM Hello
messages transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 2 }
vRtrPimNgIfTxAsserts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxAsserts indicates the number of PIM Assert
messages transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 3 }
vRtrPimNgIfTxRegisterStops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxRegisterStops indicates the number of PIM
Register Stop messages transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 4 }
vRtrPimNgIfTxRegisterStopErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxRegisterStopErrs indicates the number of PIM
errors while trasmitting PIM Register Stop messages on this interface."
::= { vRtrPimNgIfStatsEntry 5 }
vRtrPimNgIfTxBsmPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxBsmPdus indicates the number of PIM
Bootstrap Messages (BSM) transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 6 }
vRtrPimNgIfTxBsmErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxBsmErrs indicates the number of errors while
transmitting PIM Bootstrap Messages (BSM) on this interface."
::= { vRtrPimNgIfStatsEntry 7 }
vRtrPimNgIfRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxPkts indicates the number of multicast data
packets received on this interface."
::= { vRtrPimNgIfStatsEntry 8 }
vRtrPimNgIfRxHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxHellos indicates the number of PIM hello
messages received on this interface."
::= { vRtrPimNgIfStatsEntry 9 }
vRtrPimNgIfRxHellosDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxHellosDropped indicates the number of PIM
Hello messages which were received on this interface but were dropped."
::= { vRtrPimNgIfStatsEntry 10 }
vRtrPimNgIfRxNbrUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxNbrUnknown indicates the number of PIM
messages (other than Hello messages) which were received on this
interface and were rejected because the adjacency with the neighbor
router was not already established."
::= { vRtrPimNgIfStatsEntry 11 }
vRtrPimNgIfRxBadChecksumDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxBadChecksumDiscard indicates the number of
PIM messages received on this interface which were discarded because
of bad checksum."
::= { vRtrPimNgIfStatsEntry 12 }
vRtrPimNgIfRxBadVersionDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxBadVersionDiscard indicates the number of
PIM messages with bad versions received on this interface."
::= { vRtrPimNgIfStatsEntry 13 }
vRtrPimNgIfRxBadEncodings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxBadEncodings indicates the number of PIM
messages with bad encodings received on this interface."
::= { vRtrPimNgIfStatsEntry 14 }
vRtrPimNgIfRxAsserts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxAsserts indicates the number of PIM Assert
messages received on this interface."
::= { vRtrPimNgIfStatsEntry 15 }
vRtrPimNgIfRxAssertErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxAssertErrs indicates the number of errors
while processing Assert messages received on this interface."
::= { vRtrPimNgIfStatsEntry 16 }
vRtrPimNgIfRxRegisters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxRegisters indicates the number of PIM
Register messages received on this interface."
::= { vRtrPimNgIfStatsEntry 17 }
vRtrPimNgIfRxRegisterErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxRegisterErrs indicates the number of errors
while processing Register messages received on this interface."
::= { vRtrPimNgIfStatsEntry 18 }
vRtrPimNgIfRxNullRegisters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxNullRegisters indicates the number of PIM
Null Register messages received on this interface."
::= { vRtrPimNgIfStatsEntry 19 }
vRtrPimNgIfRxRegisterStops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxRegisterStops indicates the number of PIM
Register Stop messages received on this interface."
::= { vRtrPimNgIfStatsEntry 20 }
vRtrPimNgIfRxRegisterStopErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxRegisterStopErrs indicates the number of
errors while processing Register Stop messages received on this
interface."
::= { vRtrPimNgIfStatsEntry 21 }
vRtrPimNgIfRxCRPAdvNoRtrAlert OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxCRPAdvNoRtrAlert indicates the number of
Candidate-RP Advertisements(C-RP-Adv) received on this interface which
had no router alert option set."
::= { vRtrPimNgIfStatsEntry 22 }
vRtrPimNgIfRxBsmPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxBsmPdus indicates the number of Bootstrap
Messages received on this interface."
::= { vRtrPimNgIfStatsEntry 23 }
vRtrPimNgIfRxBsmPduDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxBsmPduDrops indicates the number of
Bootstrap Messages received on this interface but were dropped."
::= { vRtrPimNgIfStatsEntry 24 }
vRtrPimNgIfStarStarRPTypes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfStarStarRPTypes indicates the number of
entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is
'starStarRP'."
::= { vRtrPimNgIfStatsEntry 25 }
vRtrPimNgIfStarGTypes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfStarGTypes indicates the number of entries in
vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'starG'."
::= { vRtrPimNgIfStatsEntry 26 }
vRtrPimNgIfSGTypes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfSGTypes indicates the number of entries in
vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType is 'sg'."
::= { vRtrPimNgIfStatsEntry 27 }
vRtrPimNgIfJoinPolicyDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfJoinPolicyDrops indicates the number of times
the join policy match resulted in dropping PIM Join-Prune Message or
one of the source group contained in the message. PIM Join policies
are configured using join policy objects in vRtrPimNgGenPolicyTable."
::= { vRtrPimNgIfStatsEntry 28 }
vRtrPimNgIfRegisterPolicyDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRegisterPolicyDrops indicates the number of
times the register policy match resulted in dropping PIM Register
Message. PIM Register policies are configured using the register
policy objects in vRtrPimNgGenPolicyTable."
::= { vRtrPimNgIfStatsEntry 29 }
vRtrPimNgIfBtrImpPolicyDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfBtrImpPolicyDrops indicates the number of
Bootstrap Messages received on this interface but were dropped because
of Bootstrap import policy. PIM Bootstrap import policies are
configured using bootstrap import policy objects in
vRtrPimNgGenPolicyTable."
::= { vRtrPimNgIfStatsEntry 30 }
vRtrPimNgIfBtrExpPolicyDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfBtrExpPolicyDrops indicates the number of
Bootstrap Messages that were not transmitted on this interface because
of Bootstrap export policy. PIM Bootstrap export policies are
configured using bootstrap export policy objects in
vRtrPimNgGenPolicyTable."
::= { vRtrPimNgIfStatsEntry 31 }
vRtrPimNgIfTxJoinPrunes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxJoinPrunes indicates the number of PIM Join
Prune messages transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 32 }
vRtrPimNgIfRxJoinPrunes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxJoinPrunes indicates the number of PIM Join
Prune messages received on this interface."
::= { vRtrPimNgIfStatsEntry 33 }
vRtrPimNgIfRxInvalidJoinPrunes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxInvalidJoinPrunes indicates the number of
invalid PIM Join Prune messages received on this interface. A Join
Prune message is invalid when the RP address in the message is not the
RP for the group specified in the message. If such a message arrives,
a vRtrPimNgInvalidJoinPrune notification is sent."
::= { vRtrPimNgIfStatsEntry 34 }
vRtrPimNgIfRxInvalidRegisters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxInvalidRegisters indicates the number of
invalid PIM Register messages received on this interface. A Register
message is invalid when the RP address in the message is not the RP
for the group specified in the message. If such a message arrives, a
vRtrPimNgInvalidRegister notification is sent."
::= { vRtrPimNgIfStatsEntry 35 }
vRtrPimNgIfRxUnknownPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxUnknownPdus indicates the number of packets
received with an unsupported PIM type."
::= { vRtrPimNgIfStatsEntry 36 }
vRtrPimNgIfRxJoinPruneErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxJoinPruneErrs indicates the number of errors
while processing Join-Prune messages received on this interface."
::= { vRtrPimNgIfStatsEntry 37 }
vRtrPimNgIfRxBSMNoRouterAlertDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxBSMNoRouterAlertDrops indicates the number
of BSM messages that were dropped because router alert option was not
present."
::= { vRtrPimNgIfStatsEntry 38 }
vRtrPimNgIfRxBSMWrongIfDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxBSMWrongIfDrops indicates the number of BSM
messages that were dropped either because they were not sent by the
correct RPF neighbor or because they arrived on the wrong interface."
::= { vRtrPimNgIfStatsEntry 39 }
vRtrPimNgIfMcacPolicyDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfMcacPolicyDrops indicates the
number times a PIM Group is dropped because of applying a multicast
CAC policy on this interface."
::= { vRtrPimNgIfStatsEntry 40 }
vRtrPimNgIfTxIntraASAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxIntraASAD indicates the number of
Intra AS AD routes transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 41 }
vRtrPimNgIfRxIntraASAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxIntraASAD indicates the number of
Intra AS AD routes received on this interface."
::= { vRtrPimNgIfStatsEntry 42 }
vRtrPimNgIfRxIntraASADErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxIntraASADErrs indicates the
number of errors while processing Intra AS AD routes received on this
interface."
::= { vRtrPimNgIfStatsEntry 43 }
vRtrPimNgIfTxInterASAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxInterASAD indicates the number of
Inter AS AD routes transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 44 }
vRtrPimNgIfRxInterASAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxInterASAD indicates the number of
Inter AS AD routes received on this interface."
::= { vRtrPimNgIfStatsEntry 45 }
vRtrPimNgIfRxInterASADErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxInterASADErrs indicates the
number of errors while processing Inter AS AD routes received on this
interface."
::= { vRtrPimNgIfStatsEntry 46 }
vRtrPimNgIfTxSpmsiAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxSpmsiAD indicates the number of
S-PMSI AD routes transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 47 }
vRtrPimNgIfRxSpmsiAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxSpmsiAD indicates the number of
S-PMSI AD routes received on this interface."
::= { vRtrPimNgIfStatsEntry 48 }
vRtrPimNgIfRxSpmsiADErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxSpmsiADErrs indicates the number
of errors while processing S-PMSI AD routes received on this
interface."
::= { vRtrPimNgIfStatsEntry 49 }
vRtrPimNgIfTxLeafAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxLeafAD indicates the number of
Leaf AD routes transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 50 }
vRtrPimNgIfRxLeafAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxLeafAD indicates the number of
Leaf AD routes received on this interface."
::= { vRtrPimNgIfStatsEntry 51 }
vRtrPimNgIfRxLeafADErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxLeafADErrs indicates the number
of errors while processing Leaf AD routes received on this interface."
::= { vRtrPimNgIfStatsEntry 52 }
vRtrPimNgIfTxSrcActAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxSrcActAD indicates the number of
Source Active AD routes transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 53 }
vRtrPimNgIfRxSrcActAD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxSrcActAD indicates the number of
Source Active AD routes received on this interface."
::= { vRtrPimNgIfStatsEntry 54 }
vRtrPimNgIfTxSrcActADErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxSrcActADErrs indicates the number
of errors while processing Source Active AD routes received on this
interface."
::= { vRtrPimNgIfStatsEntry 55 }
vRtrPimNgIfTxSharedTreeJoin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxSharedTreeJoin indicates the
number of Shared Tree Joins transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 56 }
vRtrPimNgIfRxSharedTreeJoin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxSharedTreeJoin indicates the
number of Shared Tree Joins received on this interface."
::= { vRtrPimNgIfStatsEntry 57 }
vRtrPimNgIfRxSharedTreeJoinErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxSharedTreeJoinErrs indicates the
number of errors while processing Shared Tree Joins received on this
interface."
::= { vRtrPimNgIfStatsEntry 58 }
vRtrPimNgIfTxSrcTreeJoin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxSrcTreeJoin indicates the number
of Source Tree Joins transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 59 }
vRtrPimNgIfRxSrcTreeJoin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxSrcTreeJoin indicates the number
of Source Tree Joins received on this interface."
::= { vRtrPimNgIfStatsEntry 60 }
vRtrPimNgIfRxSrcTreeJoinErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxSrcTreeJoinErrs indicates the
number of errors while processing Source Tree Joins received on this
interface."
::= { vRtrPimNgIfStatsEntry 61 }
vRtrPimNgIfTxBgpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxBgpPkts indicates the number of
BGP Packets transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 62 }
vRtrPimNgIfRxBgpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxBgpPkts indicates the number of
BGP Packets received on this interface."
::= { vRtrPimNgIfStatsEntry 63 }
vRtrPimNgIfTxMdtSafi OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxMdtSafi indicates the number of
MDT-SAFI AD routes transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 64 }
vRtrPimNgIfRxMdtSafi OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxMdtSafi indicates the number of
MDT-SAFI AD routes received on this interface."
::= { vRtrPimNgIfStatsEntry 65 }
vRtrPimNgIfRxMdtSafiErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxMdtSafiErrs indicates the number
of errors while processing MDT-SAFI AD routes received on this
interface."
::= { vRtrPimNgIfStatsEntry 66 }
vRtrPimNgIfRxAutoRpGenErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxAutoRpGenErrs indicates the
number of errors while processing Auto-RP messages received on this
interface."
::= { vRtrPimNgIfStatsEntry 67 }
vRtrPimNgIfRxAutoRpAnnounce OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxAutoRpAnnounce indicates the
number Auto-RP announcements received on this interface."
::= { vRtrPimNgIfStatsEntry 68 }
vRtrPimNgIfTxAutoRpAnnounce OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxAutoRpAnnounce indicates the
number of Auto-RP announcements transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 69 }
vRtrPimNgIfRxAutoRpAnnounceErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxAutoRpAnnounceErrs indicates the
number of errors while processing Auto-RP announcements received on
this interface."
::= { vRtrPimNgIfStatsEntry 70 }
vRtrPimNgIfTxAutoRpAnnounceErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxAutoRpAnnounceErrs indicates the
number of errors while transmitting Auto-RP announcements on this
interface."
::= { vRtrPimNgIfStatsEntry 71 }
vRtrPimNgIfRxAutoRpMapping OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxAutoRpMapping indicates the
number of Auto-RP mappings received on this interface."
::= { vRtrPimNgIfStatsEntry 72 }
vRtrPimNgIfTxAutoRpMapping OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxAutoRpMapping indicates the
number of Auto-RP mappings transmitted on this interface."
::= { vRtrPimNgIfStatsEntry 73 }
vRtrPimNgIfRxAutoRpMappingErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfRxAutoRpMappingErrs indicates the
number of errors while processing Auto-RP mappings received on this
interface."
::= { vRtrPimNgIfStatsEntry 74 }
vRtrPimNgIfTxAutoRpMappingErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgIfTxAutoRpMappingErrs indicates the
number of errors while transmitting Auto-RP mappings on this
interface."
::= { vRtrPimNgIfStatsEntry 75 }
vRtrPimNgIfRxJoinPrunesMvpnRpfv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxJoinPrunesMvpnRpfv indicates the number of
PIM Join Prune messages received on this interface which were
propagated using RPF vectors for the MVPN."
::= { vRtrPimNgIfStatsEntry 76 }
vRtrPimNgIfTxJoinPrunesMvpnRpfv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfTxJoinPrunesMvpnRpfv indicates the number of
PIM Join Prune messages transmitted on this interface which were
propagated using RPF vectors for the MVPN."
::= { vRtrPimNgIfStatsEntry 77 }
vRtrPimNgIfRxInvalidJPMvpnRpfv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxInvalidJPMvpnRpfv indicates the number of
invalid PIM Join Prune messages received on this interface which were
propagated using RPF vectors for the MVPN."
::= { vRtrPimNgIfStatsEntry 78 }
vRtrPimNgIfGraftsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGraftsRx indicates the number of graft
messages which were received on this interface."
::= { vRtrPimNgIfStatsEntry 79 }
vRtrPimNgIfGraftsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGraftsTx indicates the number of graft
messages which were transmitted from this interface."
::= { vRtrPimNgIfStatsEntry 80 }
vRtrPimNgIfGraftsRxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGraftsRxErrors indicates the number of invalid
graft messages which were received on this interface."
::= { vRtrPimNgIfStatsEntry 81 }
vRtrPimNgIfGraftsAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGraftsAckRx indicates the number of graft
acknowledgement messages which were received on this interface."
::= { vRtrPimNgIfStatsEntry 82 }
vRtrPimNgIfGraftsAckTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGraftsAckTx indicates the number of graft
acknowledgement messages which were transmitted from this interface."
::= { vRtrPimNgIfStatsEntry 83 }
vRtrPimNgIfGraftsAckRxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGraftsAckRxErrors indicates the number of
invalid graft acknowledgement messages which were received on this
interface."
::= { vRtrPimNgIfStatsEntry 84 }
vRtrPimNgIfRxAutoRpMappingRpfMM OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxAutoRpMappingRpfMM indicates the number of
times an Auto-RP mapping message was received on this interface other
than the RPF interface."
::= { vRtrPimNgIfStatsEntry 85 }
vRtrPimNgIfRxAutoRpAnnounceRpfMM OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfRxAutoRpAnnounceRpfMM indicates the number of
times an Auto-RP announcement message was received on this interface
other than the RPF interface."
::= { vRtrPimNgIfStatsEntry 86 }
vRtrPimNgDataMtTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgDataMtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the Data Multicast Tunnel(MT) interfaces.
An MT can be thought of as a connector between a set of PE routers
forming a Multicast Domain. From the perspective of a VPN-specific
PIM instance, an MT is a single multi-access interface.
An MT interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by
vRtrPimNgDataMtThd. If the data-threshold goes below the value
specified by vRtrPimNgDataMtThd, the MT interface is automatically
deleted. vRtrPimNgDataMtThd is present in another table
vRtrPimNgDataMtThdTable."
::= { vRtrPimNgIfObjs 7 }
vRtrPimNgDataMtEntry OBJECT-TYPE
SYNTAX VRtrPimNgDataMtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgDataMtTable. This is a read-only table."
INDEX {
vRtrID,
vRtrPimNgDataMtMdSourceAddrType,
vRtrPimNgDataMtMdSourceAddress,
vRtrPimNgDataMtMdGroupAddrType,
vRtrPimNgDataMtMdGroupAddress
}
::= { vRtrPimNgDataMtTable 1 }
VRtrPimNgDataMtEntry ::= SEQUENCE
{
vRtrPimNgDataMtMdSourceAddrType InetAddressType,
vRtrPimNgDataMtMdSourceAddress InetAddress,
vRtrPimNgDataMtMdGroupAddrType InetAddressType,
vRtrPimNgDataMtMdGroupAddress InetAddress,
vRtrPimNgDataMtIfIndex InterfaceIndex,
vRtrPimNgDataMtUptime Unsigned32,
vRtrPimNgDataMtNumVpnSGs Unsigned32,
vRtrPimNgDataMtMultiStreamId Unsigned32
}
vRtrPimNgDataMtMdSourceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtMdSourceAddrType indicates the address
type of vRtrPimNgDataMtMdSourceAddress."
::= { vRtrPimNgDataMtEntry 1 }
vRtrPimNgDataMtMdSourceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtMdSourceAddress indicates the source
address for a Multicast Tunnel."
::= { vRtrPimNgDataMtEntry 2 }
vRtrPimNgDataMtMdGroupAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtMdGroupAddrType indicates the address type
of vRtrPimNgDataMtMdGroupAddress."
::= { vRtrPimNgDataMtEntry 3 }
vRtrPimNgDataMtMdGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtMdGroupAddress indicates the group address
for a Multicast Tunnel."
::= { vRtrPimNgDataMtEntry 4 }
vRtrPimNgDataMtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtIfIndex indicates the interface index
of the Multicast Data Tunnel(Data MT) interface. This value will be
non-zero integer value specific to the router."
::= { vRtrPimNgDataMtEntry 5 }
vRtrPimNgDataMtUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtUptime indicates the time since this data
Multicast Tunnel(MT) entry got created."
::= { vRtrPimNgDataMtEntry 6 }
vRtrPimNgDataMtNumVpnSGs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtNumVpnSGs indicates the number of
C-(S,G)'s mapped to this Multicast Tunnel(MT) interface."
::= { vRtrPimNgDataMtEntry 7 }
vRtrPimNgDataMtMultiStreamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtMultiStreamId indicates the stream Id of
this multi stream SPMSI."
::= { vRtrPimNgDataMtEntry 8 }
vRtrPimNgDataMtCGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgDataMtCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the C-(S,G) mapped to the Data Multicast Tunnel(MT).
An entry in vRtrPimNgDataMtCGrpSrcTable is created whenever a C-(S,G)
is mapped to a MT interface. An entry will be deleted automatically
when the mapping between C-(S,G) and Data MT is removed."
::= { vRtrPimNgIfObjs 8 }
vRtrPimNgDataMtCGrpSrcEntry OBJECT-TYPE
SYNTAX VRtrPimNgDataMtCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgDataMtCGrpSrcTable. This is a read-only
table."
INDEX {
vRtrID,
vRtrPimNgDataMtMdSourceAddrType,
vRtrPimNgDataMtMdSourceAddress,
vRtrPimNgDataMtMdGroupAddrType,
vRtrPimNgDataMtMdGroupAddress,
vRtrPimNgDataMtCGrpSrcGrpAdType,
vRtrPimNgDataMtCGrpSrcGroupAddr,
vRtrPimNgDataMtCGrpSrcSrcAdType,
vRtrPimNgDataMtCGrpSrcSrcAddr
}
::= { vRtrPimNgDataMtCGrpSrcTable 1 }
VRtrPimNgDataMtCGrpSrcEntry ::= SEQUENCE
{
vRtrPimNgDataMtCGrpSrcGrpAdType InetAddressType,
vRtrPimNgDataMtCGrpSrcGroupAddr InetAddress,
vRtrPimNgDataMtCGrpSrcSrcAdType InetAddressType,
vRtrPimNgDataMtCGrpSrcSrcAddr InetAddress,
vRtrPimNgDataMtCGrpSrcState INTEGER,
vRtrPimNgDataMtCGrpSrcJoinTimer Unsigned32,
vRtrPimNgDataMtCGrpSrcHolddownTimer Unsigned32,
vRtrPimNgDataMtCGrpSrcExpiryTimer Unsigned32,
vRtrPimNgDataMtCGrpSrcUptime Unsigned32,
vRtrPimNgDataMtCGrpSrcDataMtThreshold Unsigned32,
vRtrPimNgDataMtCGrpSrcIfIndex InterfaceIndex
}
vRtrPimNgDataMtCGrpSrcGrpAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcGrpAdType indicates the address
type of vRtrPimNgDataMtCGrpSrcGroupAddr."
::= { vRtrPimNgDataMtCGrpSrcEntry 1 }
vRtrPimNgDataMtCGrpSrcGroupAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcGroupAddr indicates the C-group
address. It is the IP version neutral address of the multicast
traffic destination address in the VPN."
::= { vRtrPimNgDataMtCGrpSrcEntry 2 }
vRtrPimNgDataMtCGrpSrcSrcAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcSrcAdType indicates the address
type of vRtrPimNgDataMtCGrpSrcSrcAddr."
::= { vRtrPimNgDataMtCGrpSrcEntry 3 }
vRtrPimNgDataMtCGrpSrcSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcSrcAddr indicates the C-source
address. It is the IP version neutral address of the traffic source
in the VPN."
::= { vRtrPimNgDataMtCGrpSrcEntry 4 }
vRtrPimNgDataMtCGrpSrcState OBJECT-TYPE
SYNTAX INTEGER {
txJoinPending (0),
txJoined (1),
rxNotJoined (2),
rxJoined (3),
rxJoinedTracking (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcState indicates the state of this
Multicast Tunnel(MT) (S,G).
If the data-mdt is bound to a (C-S,G) on the ingress PE and if the PE
has sent out a MDT Join TLV, the state will be txJoinPending. The
state will change to txJoined when the (C-S,G) traffic is switched over
to the new data mdt.
If the data-mdt is not bound to a (C-S,G) on the egress PE,
the state will be rxNotJoined. The state will be rxJoined if the
(C-S,G) has bound to the data-mdt.
Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD
with no tunnel information."
::= { vRtrPimNgDataMtCGrpSrcEntry 5 }
vRtrPimNgDataMtCGrpSrcJoinTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the source
switches to the Data Multicast Distribution Tree (MDT) group.
After providing sufficient time for all PEs to join the data MDT the
transmitting PE switches the given multicast stream to the Data MDT.
The PE router connected to the source then starts encapsulating
traffic using the Data MDT group."
::= { vRtrPimNgDataMtCGrpSrcEntry 6 }
vRtrPimNgDataMtCGrpSrcHolddownTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcHolddownTimer indicates the time
interval before which the PE router will switch back to the Default
MDT tree after it started encapsulating packets using the Data MDT
group. This is used to avoid oscillation when traffic is bursty."
::= { vRtrPimNgDataMtCGrpSrcEntry 7 }
vRtrPimNgDataMtCGrpSrcExpiryTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcExpiryTimer indicates the time
interval after which the Provider Edge (PE) router connected to the
receivers time out Multicast Distribution Tree Join Tag Length Value
(TLV) received and leave the data MDT group. This value must be
consistent among PE routers."
::= { vRtrPimNgDataMtCGrpSrcEntry 8 }
vRtrPimNgDataMtCGrpSrcUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcUptime indicates the time since
this data Multicast Tunnel(MT) entry got created."
::= { vRtrPimNgDataMtCGrpSrcEntry 9 }
vRtrPimNgDataMtCGrpSrcDataMtThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcDataMtThreshold indicates the
threshold in kilobits per second(kbps) for the group to which this
C-(S,G) belongs. For a C-group G configured with a threshold, a
C-(S,G) is mapped to a Data Multicast Tunnel (MT) only if the
C-(S,G)'s rate exceeds this configured threshold. "
::= { vRtrPimNgDataMtCGrpSrcEntry 10 }
vRtrPimNgDataMtCGrpSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgDataMtCGrpSrcIfIndex indicates the interface
index of the Multicast Data Tunnel(Data MT) interface. This value will
be non-zero integer value specific to the router."
::= { vRtrPimNgDataMtCGrpSrcEntry 11 }
vRtrPimNgIfSecNbrTblLstChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfSecNbrTblLstChanged indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrPimNgIfSecNbrTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { vRtrPimNgIfObjs 9 }
vRtrPimNgIfSecNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfSecNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the secondary addresses advertised by PIM neighbor."
::= { vRtrPimNgIfObjs 10 }
vRtrPimNgIfSecNbrEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfSecNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents each secondary address advertised by each of
the router's PIM neighbors. The Address List Option advertises all the
secondary addresses associated with the source interface of the router
originating the HELLO message. Entries in this table cannot be created
or deleted using SNMP."
INDEX {
vRtrID,
vRtrIfIndex,
vRtrPimNgIfNeighborAddressType,
vRtrPimNgIfNeighborAddress,
vRtrPimNgIfSecNbrAddrType,
vRtrPimNgIfSecNbrAddress
}
::= { vRtrPimNgIfSecNbrTable 1 }
VRtrPimNgIfSecNbrEntry ::= SEQUENCE
{
vRtrPimNgIfSecNbrAddrType InetAddressType,
vRtrPimNgIfSecNbrAddress InetAddress
}
vRtrPimNgIfSecNbrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfSecNbrAddrType indicates the type of IP
address of the PIM secondary neighbor."
::= { vRtrPimNgIfSecNbrEntry 1 }
vRtrPimNgIfSecNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfSecNbrAddress indicates the IP address of the
PIM secondary neighbor."
::= { vRtrPimNgIfSecNbrEntry 2 }
vRtrPimNgRsvpPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgRsvpPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the RSVP Provider-Network Multicast Service (PMSI)
interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a Multicast Domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
A PMSI interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by
vRtrPimNgDataMtThd. If the data-threshold goes below the value
specified by vRtrPimNgDataMtThd, the PMSI interface is automatically
deleted."
::= { vRtrPimNgIfObjs 11 }
vRtrPimNgRsvpPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgRsvpPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgRsvpPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrPimNgRsvpPmsiExtTunlAdrType,
vRtrPimNgRsvpPmsiExtTunnelAddr,
vRtrPimNgRsvpPmsiTunnelId,
vRtrPimNgRsvpPmsiP2MPId
}
::= { vRtrPimNgRsvpPmsiTable 1 }
VRtrPimNgRsvpPmsiEntry ::= SEQUENCE
{
vRtrPimNgRsvpPmsiExtTunlAdrType InetAddressType,
vRtrPimNgRsvpPmsiExtTunnelAddr InetAddress,
vRtrPimNgRsvpPmsiTunnelId Unsigned32,
vRtrPimNgRsvpPmsiP2MPId Unsigned32,
vRtrPimNgRsvpPmsiIfIndex InterfaceIndex,
vRtrPimNgRsvpPmsiUptime Unsigned32,
vRtrPimNgRsvpPmsiNumVpnSGs Unsigned32,
vRtrPimNgRsvpPmsiIfType INTEGER,
vRtrPimNgRsvpPmsiOperState TmnxOperState,
vRtrPimNgRsvpPmsiMultiStreamId Unsigned32
}
vRtrPimNgRsvpPmsiExtTunlAdrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiExtTunlAdrType indicates the address
type of vRtrPimNgRsvpPmsiExtTunnelAddr."
::= { vRtrPimNgRsvpPmsiEntry 1 }
vRtrPimNgRsvpPmsiExtTunnelAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiExtTunnelAddr indicates the extended
Tunnel address for a PMSI."
::= { vRtrPimNgRsvpPmsiEntry 2 }
vRtrPimNgRsvpPmsiTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiTunnelId indicates the Source RSVP
Tunnel Identifier for a PMSI."
::= { vRtrPimNgRsvpPmsiEntry 3 }
vRtrPimNgRsvpPmsiP2MPId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiP2MPId indicates the P2MP Identifier for
a PMSI."
::= { vRtrPimNgRsvpPmsiEntry 4 }
vRtrPimNgRsvpPmsiIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiIfIndex indicates the interface index of
the RSVP PMSI. This value will be non-zero integer value specific to
the router."
::= { vRtrPimNgRsvpPmsiEntry 5 }
vRtrPimNgRsvpPmsiUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiUptime indicates the time since this
RSVP PMSI entry got created."
::= { vRtrPimNgRsvpPmsiEntry 6 }
vRtrPimNgRsvpPmsiNumVpnSGs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiNumVpnSGs indicates the number of
C-(S,G)'s mapped to this PMSI."
::= { vRtrPimNgRsvpPmsiEntry 7 }
vRtrPimNgRsvpPmsiIfType OBJECT-TYPE
SYNTAX INTEGER {
rx (0),
tx (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiIfType indicates whether this PMSI
interface is of type transmitter or receiver."
::= { vRtrPimNgRsvpPmsiEntry 8 }
vRtrPimNgRsvpPmsiOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiOperState indicates the current
operational state of this multi stream SPMSI."
::= { vRtrPimNgRsvpPmsiEntry 9 }
vRtrPimNgRsvpPmsiMultiStreamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpPmsiMultiStreamId indicates the stream Id of
this multi stream SPMSI."
::= { vRtrPimNgRsvpPmsiEntry 10 }
vRtrPimNgRsvpPmsiCGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgRsvpPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the C-(S,G) mapped to the RSVP Provider-Network
Multicast Service Interface (PMSI).
An entry in vRtrPimNgRsvpPmsiCGrpSrcTable is created whenever a
C-(S,G) is mapped to a PMSI interface. An entry will be deleted
automatically when the mapping between C-(S,G) and RSVP PMSI is
removed."
::= { vRtrPimNgIfObjs 12 }
vRtrPimNgRsvpPmsiCGrpSrcEntry OBJECT-TYPE
SYNTAX VRtrPimNgRsvpPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgRsvpPmsiCGrpSrcTable. This is a read-only
table."
INDEX {
vRtrID,
vRtrPimNgRsvpPmsiExtTunlAdrType,
vRtrPimNgRsvpPmsiExtTunnelAddr,
vRtrPimNgRsvpPmsiTunnelId,
vRtrPimNgRsvpPmsiP2MPId,
vRtrPimRsvpPmsiCGrpSrcGrpAdType,
vRtrPimRsvpPmsiCGrpSrcGrpAddr,
vRtrPimRsvpPmsiCGrpSrcSrcAdType,
vRtrPimRsvpPmsiCGrpSrcSrcAddr
}
::= { vRtrPimNgRsvpPmsiCGrpSrcTable 1 }
VRtrPimNgRsvpPmsiCGrpSrcEntry ::= SEQUENCE
{
vRtrPimRsvpPmsiCGrpSrcGrpAdType InetAddressType,
vRtrPimRsvpPmsiCGrpSrcGrpAddr InetAddress,
vRtrPimRsvpPmsiCGrpSrcSrcAdType InetAddressType,
vRtrPimRsvpPmsiCGrpSrcSrcAddr InetAddress,
vRtrPimRsvpPmsiCGrpSrcState INTEGER,
vRtrPimRsvpPmsiCGrpSrcJoinTimer Unsigned32,
vRtrPimRsvpPmsiCGrpSrcHldDnTimer Unsigned32,
vRtrPimRsvpPmsiCGrpSrcExpTimer Unsigned32,
vRtrPimRsvpPmsiCGrpSrcUptime Unsigned32,
vRtrPimDataMtCGrpSrcDataThresh Unsigned32,
vRtrPimRsvpPmsiCGrpSrcIfIndex InterfaceIndex,
vRtrPimRsvpPmsiCGrpSrcRxThresEn TruthValue,
vRtrPimRsvpPmsiCGrpSrcRxCount Unsigned32
}
vRtrPimRsvpPmsiCGrpSrcGrpAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcGrpAdType indicates the address
type of vRtrPimRsvpPmsiCGrpSrcGrpAddr."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 1 }
vRtrPimRsvpPmsiCGrpSrcGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcGrpAddr indicates the C-group
address. It is the IP version neutral address of the multicast traffic
destination address in the VPN."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 2 }
vRtrPimRsvpPmsiCGrpSrcSrcAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcSrcAdType indicates the
address type of vRtrPimRsvpPmsiCGrpSrcSrcAddr."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 3 }
vRtrPimRsvpPmsiCGrpSrcSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcSrcAddr indicates the C-source
address. It is the IP version neutral address of the traffic source
in the VPN."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 4 }
vRtrPimRsvpPmsiCGrpSrcState OBJECT-TYPE
SYNTAX INTEGER {
txJoinPending (0),
txJoined (1),
rxNotJoined (2),
rxJoined (3),
rxJoinedTracking (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcState indicates the state of this
PMSI (S,G).
If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is
allocating a RSVP PMSI, the state will be 'txJoinPending'. The state
will change to 'txJoined' when the (C-S,G) traffic is switched over to
the new S-PMSI.
If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state
will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has
bound to the S-PMSI.
Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD
with no tunnel information."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 5 }
vRtrPimRsvpPmsiCGrpSrcJoinTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the source
switches to the S-PMSI group.
After providing sufficient time for all PEs to join the S-PMSI, the
transmitting PE switches the given multicast stream to the S-PMSI. The
PE router connected to the source then starts encapsulating traffic
using the S-PMSI group."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 6 }
vRtrPimRsvpPmsiCGrpSrcHldDnTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcHldDnTimer indicates the time
interval before which the PE router will switch back to the Default
S-PMSI after it started encapsulating packets using the S-PMSI group.
This is used to avoid oscillation when traffic is bursty."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 7 }
vRtrPimRsvpPmsiCGrpSrcExpTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcExpTimer indicates the time
interval after which the Provider Edge (PE) router connected to the
receivers to time out S-PMSI Join Tag Length Value (TLV) received and
leave the S-PMSI group. This value must be consistent among PE
routers."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 8 }
vRtrPimRsvpPmsiCGrpSrcUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcUptime indicates the time since
this entry got created."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 9 }
vRtrPimDataMtCGrpSrcDataThresh OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimDataMtCGrpSrcDataThresh indicates the
threshold in kilobits per second(kbps) for the group to which
this C-(S,G) belongs.
For a C-group G configured with a threshold, a C-(S,G) is
mapped to a PMSI only if the C-(S,G)'s rate exceeds this
configured threshold. "
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 10 }
vRtrPimRsvpPmsiCGrpSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcIfIndex indicates the interface
index of the RSVP S-PMSI. This value will be non-zero integer value
specific to the router."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 11 }
vRtrPimRsvpPmsiCGrpSrcRxThresEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcRxThresEn indicates if receiver
threshold is enabled for this s-pmsi.
The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or
vRtrPimNgDataMtSpmsiDelRxThd has a non default value."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 12 }
vRtrPimRsvpPmsiCGrpSrcRxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimRsvpPmsiCGrpSrcRxCount indicates the current
receiver count for this s-pmsi.
The value of this object is applicable only when the value of
vRtrPimRsvpPmsiCGrpSrcRxThresEn is 'true'."
::= { vRtrPimNgRsvpPmsiCGrpSrcEntry 13 }
vRtrPimNgLdpPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgLdpPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Ldp Provider-Network Multicast Service (PMSI)
interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a multicast domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
A PMSI interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by
vRtrPimNgDataMtThd. If the data-threshold goes below the value
specified by vRtrPimNgDataMtThd, the PMSI interface is automatically
deleted."
::= { vRtrPimNgIfObjs 13 }
vRtrPimNgLdpPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgLdpPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgLdpPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrPimNgLdpPmsiRootAddrType,
vRtrPimNgLdpPmsiRootAddr,
vRtrPimNgLdpPmsiLspId
}
::= { vRtrPimNgLdpPmsiTable 1 }
VRtrPimNgLdpPmsiEntry ::= SEQUENCE
{
vRtrPimNgLdpPmsiRootAddrType InetAddressType,
vRtrPimNgLdpPmsiRootAddr InetAddress,
vRtrPimNgLdpPmsiLspId Unsigned32,
vRtrPimNgLdpPmsiIfIndex InterfaceIndex,
vRtrPimNgLdpPmsiUptime Unsigned32,
vRtrPimNgLdpPmsiNumVpnSGs Unsigned32,
vRtrPimNgLdpPmsiIfType INTEGER,
vRtrPimNgLdpPmsiOperState TmnxOperState,
vRtrPimNgLdpPmsiMultiStreamId Unsigned32
}
vRtrPimNgLdpPmsiRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiRootAddrType indicates the address type
of vRtrPimNgLdpPmsiRootAddr."
::= { vRtrPimNgLdpPmsiEntry 1 }
vRtrPimNgLdpPmsiRootAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiRootAddr indicates the extended tunnel
address for a PMSI."
::= { vRtrPimNgLdpPmsiEntry 2 }
vRtrPimNgLdpPmsiLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiLspId indicates the LSP Identifier for a
PMSI."
::= { vRtrPimNgLdpPmsiEntry 3 }
vRtrPimNgLdpPmsiIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiIfIndex indicates the interface index of
the Ldp PMSI. This value will be non-zero integer value specific to
the router."
::= { vRtrPimNgLdpPmsiEntry 4 }
vRtrPimNgLdpPmsiUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiUptime indicates the time since the Ldp
PMSI entry was created."
::= { vRtrPimNgLdpPmsiEntry 5 }
vRtrPimNgLdpPmsiNumVpnSGs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiNumVpnSGs indicates the number of
C-(S,G)'s mapped to this PMSI."
::= { vRtrPimNgLdpPmsiEntry 6 }
vRtrPimNgLdpPmsiIfType OBJECT-TYPE
SYNTAX INTEGER {
rx (0),
tx (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiIfType indicates whether this PMSI
interface is of type transmitter or receiver."
::= { vRtrPimNgLdpPmsiEntry 7 }
vRtrPimNgLdpPmsiOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiOperState indicates the current
operational state of this multi stream SPMSI."
::= { vRtrPimNgLdpPmsiEntry 9 }
vRtrPimNgLdpPmsiMultiStreamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpPmsiMultiStreamId indicates the stream Id of
this multi stream SPMSI."
::= { vRtrPimNgLdpPmsiEntry 10 }
vRtrPimNgLdpPmsiCGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgLdpPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the C-(S,G) mapped to the Ldp Provider-Network
Multicast Service Interface (PMSI).
An entry in vRtrPimNgLdpPmsiCGrpSrcTable is created whenever a C-(S,G)
is mapped to a PMSI interface. An entry will be deleted automatically
when the mapping between C-(S,G) and Ldp PMSI is removed."
::= { vRtrPimNgIfObjs 14 }
vRtrPimNgLdpPmsiCGrpSrcEntry OBJECT-TYPE
SYNTAX VRtrPimNgLdpPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgLdpPmsiCGrpSrcTable. This is a read-only
table."
INDEX {
vRtrID,
vRtrPimNgLdpPmsiRootAddrType,
vRtrPimNgLdpPmsiRootAddr,
vRtrPimNgLdpPmsiLspId,
vRtrPimLdpPmsiCGrpSrcGrpAdType,
vRtrPimLdpPmsiCGrpSrcGrpAddr,
vRtrPimLdpPmsiCGrpSrcSrcAdType,
vRtrPimLdpPmsiCGrpSrcSrcAddr
}
::= { vRtrPimNgLdpPmsiCGrpSrcTable 1 }
VRtrPimNgLdpPmsiCGrpSrcEntry ::= SEQUENCE
{
vRtrPimLdpPmsiCGrpSrcGrpAdType InetAddressType,
vRtrPimLdpPmsiCGrpSrcGrpAddr InetAddress,
vRtrPimLdpPmsiCGrpSrcSrcAdType InetAddressType,
vRtrPimLdpPmsiCGrpSrcSrcAddr InetAddress,
vRtrPimLdpPmsiCGrpSrcState INTEGER,
vRtrPimLdpPmsiCGrpSrcJoinTimer Unsigned32,
vRtrPimLdpPmsiCGrpSrcHldDnTimer Unsigned32,
vRtrPimLdpPmsiCGrpSrcExpTimer Unsigned32,
vRtrPimLdpPmsiCGrpSrcUptime Unsigned32,
vRtrPimLdpDataMtCGrpSrcDataThres Unsigned32,
vRtrPimLdpPmsiCGrpSrcIfIndex InterfaceIndex,
vRtrPimLdpPmsiCGrpSrcRxThresEnbl TruthValue,
vRtrPimLdpPmsiCGrpSrcRxCount Unsigned32
}
vRtrPimLdpPmsiCGrpSrcGrpAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcGrpAdType indicates the address type
of vRtrPimLdpPmsiCGrpSrcGrpAddr."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 1 }
vRtrPimLdpPmsiCGrpSrcGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcGrpAddr indicates the C-group
address. It is the IP version neutral address of the multicast traffic
destination address in the VPN."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 2 }
vRtrPimLdpPmsiCGrpSrcSrcAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcSrcAdType indicates the address type
of vRtrPimLdpPmsiCGrpSrcSrcAddr."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 3 }
vRtrPimLdpPmsiCGrpSrcSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcSrcAddr indicates the C-source
address. It is the IP version neutral address of the traffic source
in the VPN."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 4 }
vRtrPimLdpPmsiCGrpSrcState OBJECT-TYPE
SYNTAX INTEGER {
txJoinPending (0),
txJoined (1),
rxNotJoined (2),
rxJoined (3),
rxJoinedTracking (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcState indicates the state of this
PMSI (S,G).
If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is
allocating a Ldp PMSI, the state will be 'txJoinPending'. The state
will change to 'txJoined' when the (C-S,G) traffic is switched over to
the new S-PMSI.
If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state
will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has
bound to the S-PMSI.
Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD
with no tunnel information."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 5 }
vRtrPimLdpPmsiCGrpSrcJoinTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the source
switches to the S-PMSI group.
After providing sufficient time for all PEs to join the S-PMSI, the
transmitting PE switches the given multicast stream to the S-PMSI. The
PE router connected to the source then starts encapsulating traffic
using the S-PMSI group."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 6 }
vRtrPimLdpPmsiCGrpSrcHldDnTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcHldDnTimer indicates the time
interval before which the PE router will switch back to the Default
S-PMSI after it started encapsulating packets using the S-PMSI group.
This is used to avoid oscillation when traffic is bursty."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 7 }
vRtrPimLdpPmsiCGrpSrcExpTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcExpTimer indicates the time interval
after which the Provider Edge (PE) router connected to the receivers
time out S-PMSI Join Tag Length Value (TLV) received and leave the
S-PMSI group. This value must be consistent among PE routers."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 8 }
vRtrPimLdpPmsiCGrpSrcUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcUptime indicates the time since the
entry was created."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 9 }
vRtrPimLdpDataMtCGrpSrcDataThres OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpDataMtCGrpSrcDataThres indicates the
threshold in kilobits per second(kbps) for the group to which
this C-(S,G) belongs. For a C-group G configured with a threshold, a
C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this
configured threshold."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 10 }
vRtrPimLdpPmsiCGrpSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcIfIndex indicates the interface
index of the Ldp S-PMSI. This value will be non-zero integer value
specific to the router."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 11 }
vRtrPimLdpPmsiCGrpSrcRxThresEnbl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcRxThresEnbl indicates if receiver
threshold is enabled for this s-pmsi.
The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or
vRtrPimNgDataMtSpmsiDelRxThd has a non default value."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 12 }
vRtrPimLdpPmsiCGrpSrcRxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimLdpPmsiCGrpSrcRxCount indicates the current
receiver count for this s-pmsi.
The value of this object is applicable only when the value of
vRtrPimLdpPmsiCGrpSrcRxThresEnbl is 'true'."
::= { vRtrPimNgLdpPmsiCGrpSrcEntry 13 }
vRtrPimNgRsvpIPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgRsvpIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the RSVP Inclusive Provider-Network Multicast Service
(IPMSI) interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a Multicast Domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
IPMSIs are used for transmitting the MVPN's multicast data from one PE
to others."
::= { vRtrPimNgIfObjs 15 }
vRtrPimNgRsvpIPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgRsvpIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgRsvpIPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrIfIndex
}
::= { vRtrPimNgRsvpIPmsiTable 1 }
VRtrPimNgRsvpIPmsiEntry ::= SEQUENCE
{
vRtrPimNgRsvpIPmsiExtTunlAdrType InetAddressType,
vRtrPimNgRsvpIPmsiExtTunnelAddr InetAddress,
vRtrPimNgRsvpIPmsiLspName TNamedItem,
vRtrPimNgRsvpIPmsiP2MPId Unsigned32,
vRtrPimNgRsvpIPmsiTunnelId Unsigned32
}
vRtrPimNgRsvpIPmsiExtTunlAdrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIPmsiExtTunlAdrType indicates the address
type of vRtrPimNgRsvpIPmsiExtTunnelAddr."
::= { vRtrPimNgRsvpIPmsiEntry 1 }
vRtrPimNgRsvpIPmsiExtTunnelAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIPmsiExtTunnelAddr indicates the extended
tunnel address for this IPMSI."
::= { vRtrPimNgRsvpIPmsiEntry 2 }
vRtrPimNgRsvpIPmsiLspName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIPmsiLspName indicates the the RSVP point to
multipoint (P2MP) lsp name associated with this IPMSI.
In case of terminating IPMSIs the value of vRtrPimNgRsvpIPmsiLspName
indicates the name of the tunnel interface."
::= { vRtrPimNgRsvpIPmsiEntry 3 }
vRtrPimNgRsvpIPmsiP2MPId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIPmsiP2MPId indicates the P2MP Identifier
associated with this IPMSI."
::= { vRtrPimNgRsvpIPmsiEntry 4 }
vRtrPimNgRsvpIPmsiTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgRsvpIPmsiTunnelId indicates the tunnel
identifier associated with this IPMSI."
::= { vRtrPimNgRsvpIPmsiEntry 5 }
vRtrPimNgLdpIPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgLdpIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Ldp Inclusive Provider-Network Multicast Service
(IPMSI) interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a multicast domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
IPMSIs are used for transmitting the MVPN's multicast data from one PE
to others."
::= { vRtrPimNgIfObjs 16 }
vRtrPimNgLdpIPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgLdpIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgLdpIPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrIfIndex
}
::= { vRtrPimNgLdpIPmsiTable 1 }
VRtrPimNgLdpIPmsiEntry ::= SEQUENCE
{
vRtrPimNgLdpIPmsiRootAddrType InetAddressType,
vRtrPimNgLdpIPmsiRootAddr InetAddress,
vRtrPimNgLdpIPmsiLspId Unsigned32,
vRtrPimNgLdpIPmsiLspName TNamedItem
}
vRtrPimNgLdpIPmsiRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpIPmsiRootAddrType indicates the address type
of vRtrPimNgLdpIPmsiRootAddr."
::= { vRtrPimNgLdpIPmsiEntry 1 }
vRtrPimNgLdpIPmsiRootAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpIPmsiRootAddr indicates the root address for
the IPMSI."
::= { vRtrPimNgLdpIPmsiEntry 2 }
vRtrPimNgLdpIPmsiLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpIPmsiLspId indicates the lsp identifier
associated with the IPMSI."
::= { vRtrPimNgLdpIPmsiEntry 3 }
vRtrPimNgLdpIPmsiLspName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgLdpIPmsiLspName indicates the lsp name
associated with the IPMSI.
In case of terminating IPMSIs the value of vRtrPimNgLdpIPmsiLspName
indicates the name of the tunnel interface."
::= { vRtrPimNgLdpIPmsiEntry 4 }
vRtrPimNgMvpnExtranetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgMvpnExtranetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the global MVPN Extranet database. It consists of
source MVPN, receiver MVPN and the route to the source."
::= { vRtrPimNgIfObjs 17 }
vRtrPimNgMvpnExtranetEntry OBJECT-TYPE
SYNTAX VRtrPimNgMvpnExtranetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgMvpnExtranetTable represents a pairing of
source and receiver MVPN using a particular route. This is a read-only
table."
INDEX {
vRtrPimNgMvpnExtranetNHAddrType,
vRtrPimNgMvpnExtranetNHAddr,
vRtrPimNgMvpnExtranetRD,
vRtrPimNgMvpnExtranetSrcMvpn,
vRtrPimNgMvpnExtranetRecvMvpn
}
::= { vRtrPimNgMvpnExtranetTable 1 }
VRtrPimNgMvpnExtranetEntry ::= SEQUENCE
{
vRtrPimNgMvpnExtranetNHAddrType InetAddressType,
vRtrPimNgMvpnExtranetNHAddr InetAddress,
vRtrPimNgMvpnExtranetRD TmnxVPNRouteDistinguisher,
vRtrPimNgMvpnExtranetSrcMvpn Unsigned32,
vRtrPimNgMvpnExtranetRecvMvpn Unsigned32,
vRtrPimNgMvpnExtranetRecvRefCnt Unsigned32
}
vRtrPimNgMvpnExtranetNHAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnExtranetNHAddrType indicates the address
type of vRtrPimNgMvpnExtranetNHAddr."
::= { vRtrPimNgMvpnExtranetEntry 1 }
vRtrPimNgMvpnExtranetNHAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnExtranetNHAddr indicates the next hop
address in order to reach the MVPN where the source is present."
::= { vRtrPimNgMvpnExtranetEntry 2 }
vRtrPimNgMvpnExtranetRD OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnExtranetRD indicates the Route Distinguisher
used to reach the MVPN where source is present."
::= { vRtrPimNgMvpnExtranetEntry 3 }
vRtrPimNgMvpnExtranetSrcMvpn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnExtranetSrcMvpn indicates the source MVPN
id."
::= { vRtrPimNgMvpnExtranetEntry 4 }
vRtrPimNgMvpnExtranetRecvMvpn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnExtranetRecvMvpn indicates the receiver MVPN
id."
::= { vRtrPimNgMvpnExtranetEntry 5 }
vRtrPimNgMvpnExtranetRecvRefCnt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgMvpnExtranetRecvRefCnt indicates the number of
receivers in the receiver MVPN which expect to receive Extranet
traffic from this vRtrPimNgMvpnExtranetSrcMvpn."
::= { vRtrPimNgMvpnExtranetEntry 6 }
vRtrPimNgIfGrpSrcRpfvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgIfGrpSrcRpfvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast sources corresponding to the IP
multicast groups along with the RPF vector neighbours."
::= { vRtrPimNgIfObjs 18 }
vRtrPimNgIfGrpSrcRpfvEntry OBJECT-TYPE
SYNTAX VRtrPimNgIfGrpSrcRpfvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry in the vRtrPimNgIfGrpSrcRpfvEntry. Each entry
represents a source address from which receivers are interested or not
interested in receiving multicast traffic along with the information
about the RPF vector neighbours."
INDEX {
vRtrID,
vRtrIfIndex,
vRtrPimNgIfGrpSrcRpfvSGType,
vRtrPimNgIfGrpSrcRpfvGrpAddrType,
vRtrPimNgIfGrpSrcRpfvGrpAddress,
vRtrPimNgIfGrpSrcRpfvSrcAddrType,
vRtrPimNgIfGrpSrcRpfvSrcAddress,
vRtrPimNgIfGrpSrcRpfvNbrAddrType,
vRtrPimNgIfGrpSrcRpfvNbrAddress
}
::= { vRtrPimNgIfGrpSrcRpfvTable 1 }
VRtrPimNgIfGrpSrcRpfvEntry ::= SEQUENCE
{
vRtrPimNgIfGrpSrcRpfvSGType INTEGER,
vRtrPimNgIfGrpSrcRpfvGrpAddrType InetAddressType,
vRtrPimNgIfGrpSrcRpfvGrpAddress InetAddress,
vRtrPimNgIfGrpSrcRpfvSrcAddrType InetAddressType,
vRtrPimNgIfGrpSrcRpfvSrcAddress InetAddress,
vRtrPimNgIfGrpSrcRpfvNbrAddrType InetAddressType,
vRtrPimNgIfGrpSrcRpfvNbrAddress InetAddress,
vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp InetAddressType,
vRtrPimNgIfGrpSrcRpfvProxyAddr InetAddress,
vRtrPimNgIfGrpSrcRpfvRD TmnxVPNRouteDistinguisher,
vRtrPimNgIfGrpSrcRpfvType INTEGER,
vRtrPimNgIfGrpSrcRpfvIfWinner TruthValue,
vRtrPimNgIfGrpSrcRpfvNbrWinner TruthValue
}
vRtrPimNgIfGrpSrcRpfvSGType OBJECT-TYPE
SYNTAX INTEGER {
starStarRP (0),
starG (1),
sg (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvSGType indicates the type of this
entry for this table."
::= { vRtrPimNgIfGrpSrcRpfvEntry 1 }
vRtrPimNgIfGrpSrcRpfvGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvGrpAddrType indicates the type of IP
multicast group address represented by
vRtrPimNgIfGrpSrcRpfvGrpAddress."
::= { vRtrPimNgIfGrpSrcRpfvEntry 2 }
vRtrPimNgIfGrpSrcRpfvGrpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvGrpAddress indicates the IP
multicast group address for which this entry contains information."
::= { vRtrPimNgIfGrpSrcRpfvEntry 3 }
vRtrPimNgIfGrpSrcRpfvSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvSrcAddrType indicates the type of IP
multicast source address represented by
vRtrPimNgIfGrpSrcRpfvSrcAddrType."
::= { vRtrPimNgIfGrpSrcRpfvEntry 4 }
vRtrPimNgIfGrpSrcRpfvSrcAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvSrcAddress indicates the source
address for which this entry contains information."
::= { vRtrPimNgIfGrpSrcRpfvEntry 5 }
vRtrPimNgIfGrpSrcRpfvNbrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvNbrAddrType indicates the type of
address of the RPF vector neighbor represented by
vRtrPimNgIfGrpSrcRpfvNbrAddress."
::= { vRtrPimNgIfGrpSrcRpfvEntry 6 }
vRtrPimNgIfGrpSrcRpfvNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvNbrAddress indicates the address of
the the RPF vector neighbor."
::= { vRtrPimNgIfGrpSrcRpfvEntry 7 }
vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp indicates the type of
address of the RPF vector proxy represented by
vRtrPimNgIfGrpSrcRpfvProxyAddr."
::= { vRtrPimNgIfGrpSrcRpfvEntry 8 }
vRtrPimNgIfGrpSrcRpfvProxyAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvProxyAddr indicates the address of
the RPF vector proxy."
::= { vRtrPimNgIfGrpSrcRpfvEntry 9 }
vRtrPimNgIfGrpSrcRpfvRD OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvRD indicates the RPF vector Route
Distinguisher."
::= { vRtrPimNgIfGrpSrcRpfvEntry 10 }
vRtrPimNgIfGrpSrcRpfvType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
mvpn (1),
core (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvType indicates the RPF vector type."
::= { vRtrPimNgIfGrpSrcRpfvEntry 11 }
vRtrPimNgIfGrpSrcRpfvIfWinner OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvIfWinner indicates whether this
interface is the rpf-vector winner amongst all the downstream
interfaces for the (S,G) specified by vRtrPimNgIfGrpSrcRpfvGrpAddress
and vRtrPimNgIfGrpSrcRpfvSrcAddress."
::= { vRtrPimNgIfGrpSrcRpfvEntry 12 }
vRtrPimNgIfGrpSrcRpfvNbrWinner OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgIfGrpSrcRpfvNbrWinner indicates whether this
neighbor is the rpf-vector winner amongst all neighbors on the
interface specified by vRtrIfIndex for the (S,G) specified by
vRtrPimNgIfGrpSrcRpfvGrpAddress and vRtrPimNgIfGrpSrcRpfvSrcAddress."
::= { vRtrPimNgIfGrpSrcRpfvEntry 13 }
vRtrPimNgBierPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgBierPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the BIER Provider-Network Multicast Service (PMSI)
interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a Multicast Domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
A PMSI interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by
vRtrPimNgDataMtThd. If the data-threshold goes below the value
specified by vRtrPimNgDataMtThd, the PMSI interface is automatically
deleted."
::= { vRtrPimNgIfObjs 19 }
vRtrPimNgBierPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgBierPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgBierPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrPimNgBierPmsiRootAddrType,
vRtrPimNgBierPmsiRootAddr,
vRtrPimNgBierPmsiSubDomainId,
vRtrPimNgBierBfrId,
vRtrPimNgBierPmsiMplsLabel
}
::= { vRtrPimNgBierPmsiTable 1 }
VRtrPimNgBierPmsiEntry ::= SEQUENCE
{
vRtrPimNgBierPmsiRootAddrType InetAddressType,
vRtrPimNgBierPmsiRootAddr InetAddress,
vRtrPimNgBierPmsiSubDomainId Unsigned32,
vRtrPimNgBierBfrId Unsigned32,
vRtrPimNgBierPmsiMplsLabel Unsigned32,
vRtrPimNgBierPmsiIfIndex InterfaceIndex,
vRtrPimNgBierPmsiUptime Unsigned32,
vRtrPimNgBierPmsiNumVpnSGs Unsigned32,
vRtrPimNgBierPmsiIfType INTEGER,
vRtrPimNgBierPmsiOperState TmnxOperState,
vRtrPimNgBierPmsiMultiStreamId Unsigned32
}
vRtrPimNgBierPmsiRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiRootAddrType indicates the address type
of vRtrPimNgBierPmsiRootAddr."
::= { vRtrPimNgBierPmsiEntry 1 }
vRtrPimNgBierPmsiRootAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiRootAddr indicates the tunnel root
address of the PMSI."
::= { vRtrPimNgBierPmsiEntry 2 }
vRtrPimNgBierPmsiSubDomainId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiSubDomainId indicates the BIER
sub-domain ID."
::= { vRtrPimNgBierPmsiEntry 3 }
vRtrPimNgBierBfrId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierBfrId indicates the BFR ID."
::= { vRtrPimNgBierPmsiEntry 4 }
vRtrPimNgBierPmsiMplsLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiMplsLabel indicates the MPLS service
Label for the PMSI."
::= { vRtrPimNgBierPmsiEntry 5 }
vRtrPimNgBierPmsiIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiIfIndex indicates the interface index of
the BIER PMSI. This value will be non-zero integer value specific to
the router."
::= { vRtrPimNgBierPmsiEntry 6 }
vRtrPimNgBierPmsiUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiUptime indicates the time since this
BIER PMSI entry got created."
::= { vRtrPimNgBierPmsiEntry 7 }
vRtrPimNgBierPmsiNumVpnSGs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiNumVpnSGs indicates the number of
C-(S,G)'s mapped to this PMSI."
::= { vRtrPimNgBierPmsiEntry 8 }
vRtrPimNgBierPmsiIfType OBJECT-TYPE
SYNTAX INTEGER {
rx (0),
tx (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiIfType indicates whether this PMSI
interface is of type transmitter or receiver."
::= { vRtrPimNgBierPmsiEntry 9 }
vRtrPimNgBierPmsiOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiOperState indicates the current
operational state of this multi stream SPMSI."
::= { vRtrPimNgBierPmsiEntry 10 }
vRtrPimNgBierPmsiMultiStreamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiMultiStreamId indicates the stream Id of
this multi stream SPMSI."
::= { vRtrPimNgBierPmsiEntry 11 }
vRtrPimNgBierPmsiCGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgBierPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the C-(S,G) mapped to the BIER Provider-Network
Multicast Service Interface (PMSI).
An entry in vRtrPimNgBierPmsiCGrpSrcTable is created whenever a
C-(S,G) is mapped to a PMSI interface. An entry will be deleted
automatically when the mapping between C-(S,G) and Bier PMSI is
removed."
::= { vRtrPimNgIfObjs 20 }
vRtrPimNgBierPmsiCGrpSrcEntry OBJECT-TYPE
SYNTAX VRtrPimNgBierPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgBierPmsiCGrpSrcTable. This is a read-only
table."
INDEX {
vRtrID,
vRtrPimNgBierPmsiRootAddrType,
vRtrPimNgBierPmsiRootAddr,
vRtrPimNgBierPmsiSubDomainId,
vRtrPimNgBierPmsiMplsLbl,
vRtrPimNgBierBfrId,
vRtrPimBierPmsiCGrpSrcGrpAdType,
vRtrPimBierPmsiCGrpSrcGrpAddr,
vRtrPimBierPmsiCGrpSrcSrcAdType,
vRtrPimBierPmsiCGrpSrcSrcAddr
}
::= { vRtrPimNgBierPmsiCGrpSrcTable 1 }
VRtrPimNgBierPmsiCGrpSrcEntry ::= SEQUENCE
{
vRtrPimNgBierPmsiMplsLbl Unsigned32,
vRtrPimBierPmsiCGrpSrcGrpAdType InetAddressType,
vRtrPimBierPmsiCGrpSrcGrpAddr InetAddress,
vRtrPimBierPmsiCGrpSrcSrcAdType InetAddressType,
vRtrPimBierPmsiCGrpSrcSrcAddr InetAddress,
vRtrPimBierPmsiCGrpSrcState INTEGER,
vRtrPimBierPmsiCGrpSrcJoinTimer Unsigned32,
vRtrPimBierPmsiCGrpSrcHldDnTimer Unsigned32,
vRtrPimBierPmsiCGrpSrcExpTimer Unsigned32,
vRtrPimBierPmsiCGrpSrcUptime Unsigned32,
vRtrPimBierDataMtCGrpSrcDataTh Unsigned32,
vRtrPimBierPmsiCGrpSrcIfIndex InterfaceIndex,
vRtrPimBierPmsiCGrpSrcRxThEnbl TruthValue,
vRtrPimBierPmsiCGrpSrcRxCount Unsigned32
}
vRtrPimNgBierPmsiMplsLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierPmsiMplsLbl indicates the MPLS service label
for the PMSI."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 1 }
vRtrPimBierPmsiCGrpSrcGrpAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcGrpAdType indicates the address
type of vRtrPimBierPmsiCGrpSrcGrpAddr."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 2 }
vRtrPimBierPmsiCGrpSrcGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcGrpAddr indicates the C-group
address. It is the IP version neutral address of the multicast traffic
destination address in the VPN."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 3 }
vRtrPimBierPmsiCGrpSrcSrcAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcSrcAdType indicates the address
type of vRtrPimBierPmsiCGrpSrcSrcAddr."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 4 }
vRtrPimBierPmsiCGrpSrcSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcSrcAddr indicates
the C-source address. It is the IP version neutral
address of the traffic source in the VPN."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 5 }
vRtrPimBierPmsiCGrpSrcState OBJECT-TYPE
SYNTAX INTEGER {
txJoinPending (0),
txJoined (1),
rxNotJoined (2),
rxJoined (3),
rxJoinedTracking (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcState indicates the state of this
PMSI (S,G).
If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is
allocating a BIER PMSI, the state will be 'txJoinPending'. The state
will change to 'txJoined' when the (C-S,G) traffic is switched over to
the new S-PMSI.
If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state
will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has
bound to the S-PMSI.
Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD
with no tunnel information."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 6 }
vRtrPimBierPmsiCGrpSrcJoinTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the source
switches to the S-PMSI group.
After providing sufficient time for all PEs to join the S-PMSI, the
transmitting PE switches the given multicast stream to the S-PMSI. The
PE router connected to the source then starts encapsulating traffic
using the S-PMSI group."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 7 }
vRtrPimBierPmsiCGrpSrcHldDnTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcHldDnTimer indicates the time
interval before which the PE router will switch back to the Default
S-PMSI after it started encapsulating packets using the S-PMSI group.
This is used to avoid oscillation when traffic is bursty."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 8 }
vRtrPimBierPmsiCGrpSrcExpTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcExpTimer indicates the time
interval after which the Provider Edge (PE) router connected to the
receivers time out S-PMSI Join Tag Length Value (TLV) received and
leave the S-PMSI group. This value must be consistent among PE
routers."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 9 }
vRtrPimBierPmsiCGrpSrcUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcUptime indicates the time since the
entry was created."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 10 }
vRtrPimBierDataMtCGrpSrcDataTh OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierDataMtCGrpSrcDataTh indicates the
threshold in kilobits per second(kbps) for the group to which
this C-(S,G) belongs. For a C-group G configured with a threshold, a
C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this
configured threshold."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 11 }
vRtrPimBierPmsiCGrpSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcIfIndex indicates the interface
index of the BIER S-PMSI. This value will be non-zero integer value
specific to the router."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 12 }
vRtrPimBierPmsiCGrpSrcRxThEnbl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcRxThEnbl indicates if receiver
threshold is enabled for this s-pmsi.
The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or
vRtrPimNgDataMtSpmsiDelRxThd has a non default value."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 13 }
vRtrPimBierPmsiCGrpSrcRxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimBierPmsiCGrpSrcRxCount indicates the current
receiver count for this s-pmsi.
The value of this object is applicable only when the value of
vRtrPimBierPmsiCGrpSrcRxThEnbl is 'true'."
::= { vRtrPimNgBierPmsiCGrpSrcEntry 14 }
vRtrPimNgBierIPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgBierIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Bier Inclusive Provider-Network Multicast Service
(IPMSI) interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a multicast domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
IPMSIs are used for transmitting the MVPN's multicast data from one PE
to others."
::= { vRtrPimNgIfObjs 21 }
vRtrPimNgBierIPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgBierIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgBierIPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrIfIndex
}
::= { vRtrPimNgBierIPmsiTable 1 }
VRtrPimNgBierIPmsiEntry ::= SEQUENCE
{
vRtrPimNgBierIPmsiRootAddrType InetAddressType,
vRtrPimNgBierIPmsiRootAddr InetAddress,
vRtrPimNgBierIPmsiSubDomainId Unsigned32,
vRtrPimNgBierIPmsiMplsLbl Unsigned32,
vRtrPimNgBierIPmsiBfrId Unsigned32
}
vRtrPimNgBierIPmsiRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierIPmsiRootAddrType indicates the address type
of vRtrPimNgBierIPmsiRootAddr."
::= { vRtrPimNgBierIPmsiEntry 1 }
vRtrPimNgBierIPmsiRootAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierIPmsiRootAddr indicates the tunnel root
address of the IPMSI."
::= { vRtrPimNgBierIPmsiEntry 2 }
vRtrPimNgBierIPmsiSubDomainId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierIPmsiSubDomainId indicates the BIER
sub-domain ID."
::= { vRtrPimNgBierIPmsiEntry 3 }
vRtrPimNgBierIPmsiMplsLbl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierIPmsiMplsLbl indicates the MPLS service
label for the IPMSI."
::= { vRtrPimNgBierIPmsiEntry 4 }
vRtrPimNgBierIPmsiBfrId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgBierIPmsiBfrId indicates the BFR ID."
::= { vRtrPimNgBierIPmsiEntry 5 }
vRtrPimNgTSidPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgTSidPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Tree SID Provider-Network Multicast Service
(PMSI) interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a multicast domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
A PMSI interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by
vRtrPimNgDataMtThd. If the data-threshold goes below the value
specified by vRtrPimNgDataMtThd, the PMSI interface is automatically
deleted."
::= { vRtrPimNgIfObjs 22 }
vRtrPimNgTSidPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgTSidPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgTSidPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrPimNgTSidPmsiRootAddrType,
vRtrPimNgTSidPmsiRootAddr,
vRtrPimNgTSidPmsiTreeIdx
}
::= { vRtrPimNgTSidPmsiTable 1 }
VRtrPimNgTSidPmsiEntry ::= SEQUENCE
{
vRtrPimNgTSidPmsiRootAddrType InetAddressType,
vRtrPimNgTSidPmsiRootAddr InetAddress,
vRtrPimNgTSidPmsiTreeIdx Unsigned32,
vRtrPimNgTSidPmsiIfIndex InterfaceIndex,
vRtrPimNgTSidPmsiUptime Unsigned32,
vRtrPimNgTSidPmsiNumVpnSGs Unsigned32,
vRtrPimNgTSidPmsiIfType INTEGER,
vRtrPimNgTSidPmsiOperState TmnxOperState,
vRtrPimNgTSidPmsiMultiStreamId Unsigned32
}
vRtrPimNgTSidPmsiRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiRootAddrType indicates the address type
of vRtrPimNgTSidPmsiRootAddr."
::= { vRtrPimNgTSidPmsiEntry 1 }
vRtrPimNgTSidPmsiRootAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiRootAddr indicates the extended tunnel
address for a PMSI."
::= { vRtrPimNgTSidPmsiEntry 2 }
vRtrPimNgTSidPmsiTreeIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiTreeIdx indicates the LSP Identifier for
a PMSI."
::= { vRtrPimNgTSidPmsiEntry 3 }
vRtrPimNgTSidPmsiIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiIfIndex indicates the interface index of
the TSid PMSI. This value will be non-zero integer value specific to
the router."
::= { vRtrPimNgTSidPmsiEntry 4 }
vRtrPimNgTSidPmsiUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiUptime indicates the time since the TSid
PMSI entry was created."
::= { vRtrPimNgTSidPmsiEntry 5 }
vRtrPimNgTSidPmsiNumVpnSGs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiNumVpnSGs indicates the number of
C-(S,G)'s mapped to this PMSI."
::= { vRtrPimNgTSidPmsiEntry 6 }
vRtrPimNgTSidPmsiIfType OBJECT-TYPE
SYNTAX INTEGER {
rx (0),
tx (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiIfType indicates whether this PMSI
interface is of type transmitter or receiver."
::= { vRtrPimNgTSidPmsiEntry 7 }
vRtrPimNgTSidPmsiOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiOperState indicates the current
operational state of this multi stream SPMSI."
::= { vRtrPimNgTSidPmsiEntry 9 }
vRtrPimNgTSidPmsiMultiStreamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidPmsiMultiStreamId indicates the stream Id of
this multi stream SPMSI."
::= { vRtrPimNgTSidPmsiEntry 10 }
vRtrPimNgTSidPmsiCGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgTSidPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the C-(S,G) mapped to the TSid Provider-Network
Multicast Service Interface (PMSI).
An entry in vRtrPimNgTSidPmsiCGrpSrcTable is created whenever a
C-(S,G) is mapped to a PMSI interface. An entry will be deleted
automatically when the mapping between C-(S,G) and TSid PMSI is
removed."
::= { vRtrPimNgIfObjs 23 }
vRtrPimNgTSidPmsiCGrpSrcEntry OBJECT-TYPE
SYNTAX VRtrPimNgTSidPmsiCGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgTSidPmsiCGrpSrcTable. This is a read-only
table."
INDEX {
vRtrID,
vRtrPimNgTSidPmsiRootAddrType,
vRtrPimNgTSidPmsiRootAddr,
vRtrPimNgTSidPmsiTreeIdx,
vRtrPimTSidPmsiCGrpSrcGrpAdType,
vRtrPimTSidPmsiCGrpSrcGrpAddr,
vRtrPimTSidPmsiCGrpSrcSrcAdType,
vRtrPimTSidPmsiCGrpSrcSrcAddr
}
::= { vRtrPimNgTSidPmsiCGrpSrcTable 1 }
VRtrPimNgTSidPmsiCGrpSrcEntry ::= SEQUENCE
{
vRtrPimTSidPmsiCGrpSrcGrpAdType InetAddressType,
vRtrPimTSidPmsiCGrpSrcGrpAddr InetAddress,
vRtrPimTSidPmsiCGrpSrcSrcAdType InetAddressType,
vRtrPimTSidPmsiCGrpSrcSrcAddr InetAddress,
vRtrPimTSidPmsiCGrpSrcState INTEGER,
vRtrPimTSidPmsiCGrpSrcJoinTimer Unsigned32,
vRtrPimTSidPmsiCGrpSrcHldDnTimer Unsigned32,
vRtrPimTSidPmsiCGrpSrcExpTimer Unsigned32,
vRtrPimTSidPmsiCGrpSrcUptime Unsigned32,
vRtrPimTSidDataMtCGrpSrcDataTh Unsigned32,
vRtrPimTSidPmsiCGrpSrcIfIndex InterfaceIndex,
vRtrPimTSidPmsiCGrpSrcRxThEnbl TruthValue,
vRtrPimTSidPmsiCGrpSrcRxCount Unsigned32
}
vRtrPimTSidPmsiCGrpSrcGrpAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcGrpAdType indicates the address
type of vRtrPimTSidPmsiCGrpSrcGrpAddr."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 1 }
vRtrPimTSidPmsiCGrpSrcGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcGrpAddr indicates the C-group
address. It is the IP version neutral address of the multicast traffic
destination address in the VPN."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 2 }
vRtrPimTSidPmsiCGrpSrcSrcAdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcSrcAdType indicates the address
type of vRtrPimTSidPmsiCGrpSrcSrcAddr."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 3 }
vRtrPimTSidPmsiCGrpSrcSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcSrcAddr indicates the C-source
address. It is the IP version neutral address of the traffic source
in the VPN."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 4 }
vRtrPimTSidPmsiCGrpSrcState OBJECT-TYPE
SYNTAX INTEGER {
txJoinPending (0),
txJoined (1),
rxNotJoined (2),
rxJoined (3),
rxJoinedTracking (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcState indicates the state of this
PMSI (S,G).
If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE is
allocating a TSid PMSI, the state will be 'txJoinPending'. The state
will change to 'txJoined' when the (C-S,G) traffic is switched over to
the new S-PMSI.
If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state
will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has
bound to the S-PMSI.
Egress PE state will be 'rxJoinedTracking' if it receives SPMSI-AD
with no tunnel information."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 5 }
vRtrPimTSidPmsiCGrpSrcJoinTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the source
switches to the S-PMSI group.
After providing sufficient time for all PEs to join the S-PMSI, the
transmitting PE switches the given multicast stream to the S-PMSI. The
PE router connected to the source then starts encapsulating traffic
using the S-PMSI group."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 6 }
vRtrPimTSidPmsiCGrpSrcHldDnTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcHldDnTimer indicates the time
interval before which the PE router will switch back to the Default
S-PMSI after it started encapsulating packets using the S-PMSI group.
This is used to avoid oscillation when traffic is bursty."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 7 }
vRtrPimTSidPmsiCGrpSrcExpTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcExpTimer indicates the time
interval after which the Provider Edge (PE) router connected to the
receivers time out S-PMSI Join Tag Length Value (TLV) received and
leave the S-PMSI group. This value must be consistent among PE
routers."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 8 }
vRtrPimTSidPmsiCGrpSrcUptime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcUptime indicates the time since the
entry was created."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 9 }
vRtrPimTSidDataMtCGrpSrcDataTh OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidDataMtCGrpSrcDataTh indicates the
threshold in kilobits per second(kbps) for the group to which
this C-(S,G) belongs. For a C-group G configured with a threshold, a
C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this
configured threshold."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 10 }
vRtrPimTSidPmsiCGrpSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcIfIndex indicates the interface
index of the TSid S-PMSI. This value will be non-zero integer value
specific to the router."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 11 }
vRtrPimTSidPmsiCGrpSrcRxThEnbl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcRxThEnbl indicates if receiver
threshold is enabled for this s-pmsi.
The receiver threshold is enabled when vRtrPimNgDataMtSpmsiAddRxThd or
vRtrPimNgDataMtSpmsiDelRxThd has a non default value."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 12 }
vRtrPimTSidPmsiCGrpSrcRxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimTSidPmsiCGrpSrcRxCount indicates the current
receiver count for this s-pmsi.
The value of this object is applicable only when the value of
vRtrPimTSidPmsiCGrpSrcRxThEnbl is 'true'."
::= { vRtrPimNgTSidPmsiCGrpSrcEntry 13 }
vRtrPimNgTSidIPmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPimNgTSidIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the TSid Inclusive Provider-Network Multicast Service
(IPMSI) interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a multicast domain. From the perspective of a VPN-specific PIM
instance, a PMSI is a single multi-access interface.
IPMSIs are used for transmitting the MVPN's multicast data from one PE
to others."
::= { vRtrPimNgIfObjs 24 }
vRtrPimNgTSidIPmsiEntry OBJECT-TYPE
SYNTAX VRtrPimNgTSidIPmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrPimNgTSidIPmsiTable. This is a read-only table."
INDEX {
vRtrID,
vRtrIfIndex
}
::= { vRtrPimNgTSidIPmsiTable 1 }
VRtrPimNgTSidIPmsiEntry ::= SEQUENCE
{
vRtrPimNgTSidIPmsiRootAddrType InetAddressType,
vRtrPimNgTSidIPmsiRootAddr InetAddress,
vRtrPimNgTSidIPmsiTreeIdx Unsigned32,
vRtrPimNgTSidIPmsiLspName TNamedItem
}
vRtrPimNgTSidIPmsiRootAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidIPmsiRootAddrType indicates the address type
of vRtrPimNgTSidIPmsiRootAddr."
::= { vRtrPimNgTSidIPmsiEntry 1 }
vRtrPimNgTSidIPmsiRootAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidIPmsiRootAddr indicates the root address for
the IPMSI."
::= { vRtrPimNgTSidIPmsiEntry 2 }
vRtrPimNgTSidIPmsiTreeIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidIPmsiTreeIdx indicates the lsp identifier
associated with the IPMSI."
::= { vRtrPimNgTSidIPmsiEntry 3 }
vRtrPimNgTSidIPmsiLspName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrPimNgTSidIPmsiLspName indicates the lsp name
associated with the IPMSI.
In case of terminating IPMSIs the value of vRtrPimNgTSidIPmsiLspName
indicates the name of the tunnel interface."
::= { vRtrPimNgTSidIPmsiEntry 4 }
vRtrPimNgNotificationObjs OBJECT IDENTIFIER ::= { tmnxPimNgObjs 3 }
vRtrPimNgNotifySourceIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifySourceIpType indicates the type of the
address from which the PIM message originated."
::= { vRtrPimNgNotificationObjs 1 }
vRtrPimNgNotifySourceIp OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifySourceIp indicates the address from which
the PIM message originated."
::= { vRtrPimNgNotificationObjs 2 }
vRtrPimNgNotifyGroupAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyGroupAddrType indicates the type of the
group address in the PIM message."
::= { vRtrPimNgNotificationObjs 3 }
vRtrPimNgNotifyGroupAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyGroupAddr indicates the group address in
the PIM message."
::= { vRtrPimNgNotificationObjs 4 }
vRtrPimNgNotifyRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyRPAddrType indicates the type of the RP
address on the router corresponding to the group address in the PIM
message."
::= { vRtrPimNgNotificationObjs 5 }
vRtrPimNgNotifyRPAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyRPAddr indicates the RP address on the
router corresponding to the group address in the PIM message."
::= { vRtrPimNgNotificationObjs 6 }
vRtrPimNgNotifyWrongRPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyWrongRPAddrType indicates the type of the
RP address in the PIM message corresponding to the group address in
the message."
::= { vRtrPimNgNotificationObjs 7 }
vRtrPimNgNotifyWrongRPAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyWrongRPAddr indicates the RP address in
the PIM message corresponding to the group address in the message.
Whenever there is an disagreement between the RP address on the router
and the RP address in the PIM message, this object is used by the
notifications to send the RP address in the PIM message."
::= { vRtrPimNgNotificationObjs 8 }
vRtrPimNgNotifyMsgType OBJECT-TYPE
SYNTAX INTEGER {
hello (0),
register (1),
registerStop (2),
joinPrune (3),
bootstrap (4),
assert (5),
graft (6),
graftAck (7),
crpAdv (8),
igmpLocalMembership (9)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyMsgType indicates the types of PIM
message. This object is used by vRtrPimNgGrpInSSMRange notification to
identify the type of PIM message."
::= { vRtrPimNgNotificationObjs 9 }
vRtrPimNgWrongMdtDefGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongMdtDefGrpAddrType indicates the type of
address represented by vRtrPimNgWrongMdtDefGrpAddr."
::= { vRtrPimNgNotificationObjs 10 }
vRtrPimNgWrongMdtDefGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongMdtDefGrpAddr indicates the default core
group address of the Multicast Distribution Tree(MDT) in the PIM
message. Whenever there is a disagreement between the default core
group address on the router and the default core group address in the
PIM message, this object is used by the notifications to send the
default core group address in the the PIM message."
::= { vRtrPimNgNotificationObjs 11 }
vRtrPimNgWrongPmsiType OBJECT-TYPE
SYNTAX INTEGER {
pimSsm (0),
pimSm (1),
rsvp (2),
ldp (3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiType indicates the type of tunnel
received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the tunnel type
received in the PIM message."
::= { vRtrPimNgNotificationObjs 12 }
vRtrPimNgWrongPmsiP2mpId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiP2mpId indicates the P2MP Identifier
for a PMSI received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP
Identifier received in the PIM message."
::= { vRtrPimNgNotificationObjs 13 }
vRtrPimNgWrongPmsiTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiTunnelId indicates the Source RSVP
Tunnel Identifier for a PMSI received in the PIM message. This object
is used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the
Tunnel Identifier received in the PIM message."
::= { vRtrPimNgNotificationObjs 14 }
vRtrPimNgWrongPmsiExtTunlAdrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiExtTunlAdrTyp indicates the address
type of vRtrPimNgWrongPmsiExtTunlAddr."
::= { vRtrPimNgNotificationObjs 15 }
vRtrPimNgWrongPmsiExtTunlAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiExtTunlAddr indicates the Extended
Tunnel address for a PMSI received in the PIM message. This object is
used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the
Extended Tunnel address received in the PIM message."
::= { vRtrPimNgNotificationObjs 16 }
vRtrPimNgWrongVprnId OBJECT-TYPE
SYNTAX TmnxVRtrID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongVprnId indicates the VPRN of the PMSI
received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the VPRN of the
received PIM message."
::= { vRtrPimNgNotificationObjs 17 }
vRtrPimNgWrongPmsiLdpLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiLdpLspId indicates the LSP Identifier
for a PMSI received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP
Identifier received in the PIM message."
::= { vRtrPimNgNotificationObjs 18 }
vRtrPimNgWrongPmsiSenderAdrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiSenderAdrTyp indicates the address type
of vRtrPimNgWrongPmsiSenderAddr."
::= { vRtrPimNgNotificationObjs 19 }
vRtrPimNgWrongPmsiSenderAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgWrongPmsiSenderAddr indicates the extended
tunnel address for a PMSI received in the PIM message. This object is
used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the
sender address received in the PIM message."
::= { vRtrPimNgNotificationObjs 20 }
vRtrPimNgNotifySourceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifySourceAddrType indicates the type of the
source address in the PIM message."
::= { vRtrPimNgNotificationObjs 21 }
vRtrPimNgNotifySourceAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgNotifySourceAddr indicates an IP
multicast source address."
::= { vRtrPimNgNotificationObjs 22 }
vRtrPimNgNotifyDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object vRtrPimNgNotifyDescription is a printable character string."
::= { vRtrPimNgNotificationObjs 23 }
vRtrPimNgNumGraftRetriesExcd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object vRtrPimNgNumGraftRetriesExcd indicates the number of graft
retries after which graft retry was aborted."
::= { vRtrPimNgNotificationObjs 24 }
vRtrPimNgNotifyBierInbInvSDId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyBierInbInvSDId indicates the unsupported
sub-domain id received in bier inband PDU and the Join/Prune PDU is
dropped."
::= { vRtrPimNgNotificationObjs 25 }
vRtrPimNgNotifyBierInbInvBfrId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyBierInbInvBfrId indicates the unsupported
bfr id is received in bier inband PDU and the Join/Prune PDU is
dropped."
::= { vRtrPimNgNotificationObjs 26 }
vRtrPimNgNotifyBierInbSAddrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyBierInbSAddrTyp ndicates the type of the
source address in the PIM message."
::= { vRtrPimNgNotificationObjs 27 }
vRtrPimNgNotifyBierInbSAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgNotifyBierInbSAddr indicates an IP
multicast source address."
::= { vRtrPimNgNotificationObjs 28 }
vRtrPimNgNotifyBierInbGAddrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyBierInbGAddrTyp ndicates the type of the
group address in the PIM message."
::= { vRtrPimNgNotificationObjs 29 }
vRtrPimNgNotifyBierInbGAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgNotifyBierInbGAddr indicates an IP
multicast group address."
::= { vRtrPimNgNotificationObjs 30 }
vRtrPimNgNotifyBierInbIAddrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrPimNgNotifyBierInbIAddrTyp ndicates the type of the
IBBR address in the PIM message."
::= { vRtrPimNgNotificationObjs 31 }
vRtrPimNgNotifyBierInbIAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object vRtrPimNgNotifyBierInbIAddr indicates an IP
multicast bier inband IBBR address."
::= { vRtrPimNgNotificationObjs 32 }
tmnxPimNgConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 50 }
tmnxPimNgCompliances OBJECT IDENTIFIER ::= { tmnxPimNgConformance 1 }
tmnxPimNgCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGroup,
tmnxPimNgGlobalGrpSrcGroup,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group
}
::= { tmnxPimNgCompliances 1 }
tmnxPimNgV7v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcGroup,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgMvpnV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgGlobalGroupV7v0,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group
}
::= { tmnxPimNgCompliances 2 }
tmnxPimNgV8v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 8.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcGroup,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgMvpnV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0
}
::= { tmnxPimNgCompliances 3 }
tmnxPimNgV9v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 9.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcV9v0Group,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0,
tmnxPimNgIfIpv6BfdV9v0Group,
tmnxPimNgMvpnV9v0Group,
tmnxPimNgIfStatsV9v0Group,
tmnxPimNgIfIPMSIV9v0Group,
tmnxPimNgMvpnV9v0R4Group
}
::= { tmnxPimNgCompliances 4 }
tmnxPimNgV10v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 10.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcV9v0Group,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0,
tmnxPimNgIfIpv6BfdV9v0Group,
tmnxPimNgMvpnV9v0Group,
tmnxPimNgIfStatsV9v0Group,
tmnxPimNgIfIPMSIV9v0Group,
tmnxPimNgMvpnV9v0R4Group,
tmnxPimNgLdpEntryV10v0Group,
tmnxPimNgIfV10v0Group,
tmnxPimNgGlobalGroupV10v0,
tmnxPimNgIfStatsV10v0Group,
tmnxPimNgMvpnExtranetGroupV10v0
}
::= { tmnxPimNgCompliances 5 }
tmnxPimNgV11v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 11.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcV9v0Group,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0,
tmnxPimNgIfIpv6BfdV9v0Group,
tmnxPimNgMvpnV9v0Group,
tmnxPimNgIfStatsV9v0Group,
tmnxPimNgIfIPMSIV9v0Group,
tmnxPimNgMvpnV9v0R4Group,
tmnxPimNgLdpEntryV10v0Group,
tmnxPimNgIfV10v0Group,
tmnxPimNgGlobalGroupV10v0,
tmnxPimNgIfStatsV10v0Group,
tmnxPimNgMvpnExtranetGroupV10v0,
tmnxPimNgGlobalGrpSrcV10v0Group,
tmnxPimNgMVPNSndrRecvV11v0Group,
tmnxPimNgFastFailover11v0Group,
tmnxPimNgInterASMvpnV11v0Group
}
::= { tmnxPimNgCompliances 6 }
tmnxPimNgV12v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 12.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcV9v0Group,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgNotifyObjsV12v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0,
tmnxPimNgIfIpv6BfdV9v0Group,
tmnxPimNgMvpnV9v0Group,
tmnxPimNgIfStatsV9v0Group,
tmnxPimNgIfIPMSIV9v0Group,
tmnxPimNgMvpnV9v0R4Group,
tmnxPimNgLdpEntryV10v0Group,
tmnxPimNgIfV10v0Group,
tmnxPimNgIfV12v0Group,
tmnxPimNgGlobalGroupV10v0,
tmnxPimNgIfStatsV10v0Group,
tmnxPimNgMvpnExtranetGroupV10v0,
tmnxPimNgGlobalGrpSrcV10v0Group,
tmnxPimNgMVPNSndrRecvV11v0Group,
tmnxPimNgFastFailover11v0Group,
tmnxPimNgInterASMvpnV11v0Group,
tmnxPimNgCDV12v0Grp,
tmnxPimNgMvpnSrcPrefixV12v0Grp,
tmnxPimNgSgStatcExtrntV12v0Grp,
tmnxPimNgUnicastRtRemV12v0Group
}
::= { tmnxPimNgCompliances 7 }
tmnxPimNgV13v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 13.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcV9v0Group,
tmnxPimNgIfGroup,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgNotifyObjsV12v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0,
tmnxPimNgIfIpv6BfdV9v0Group,
tmnxPimNgMvpnV9v0Group,
tmnxPimNgIfStatsV9v0Group,
tmnxPimNgIfIPMSIV9v0Group,
tmnxPimNgMvpnV9v0R4Group,
tmnxPimNgLdpEntryV10v0Group,
tmnxPimNgIfV12v0Group,
tmnxPimNgGlobalGroupV10v0,
tmnxPimNgIfStatsV10v0Group,
tmnxPimNgMvpnExtranetGroupV10v0,
tmnxPimNgGlobalGrpSrcV10v0Group,
tmnxPimNgMVPNSndrRecvV11v0Group,
tmnxPimNgFastFailover11v0Group,
tmnxPimNgInterASMvpnV11v0Group,
tmnxPimNgCDV12v0Grp,
tmnxPimNgMvpnSrcPrefixV12v0Grp,
tmnxPimNgSgStatcExtrntV12v0Grp,
tmnxPimNgUnicastRtRemV12v0Group,
tmnxPimNgMcastInbandSigV13v0Grp,
tmnxPimNgMulticastSpmsiV13v0Grp,
tmnxPimAsmExtranetV13v0Grp,
tmnxPimNgIfV13v0Group,
tmnxPimNgObsoletedV13v0Group
}
::= { tmnxPimNgCompliances 8 }
tmnxPimNgV14v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 14.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcV9v0Group,
tmnxPimNgIfGroup,
tmnxPimNgIfV14v0Group,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgNotifyObjsV12v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0,
tmnxPimNgIfIpv6BfdV9v0Group,
tmnxPimNgMvpnV9v0Group,
tmnxPimNgIfStatsV9v0Group,
tmnxPimNgIfIPMSIV9v0Group,
tmnxPimNgMvpnV9v0R4Group,
tmnxPimNgLdpEntryV10v0Group,
tmnxPimNgIfV12v0Group,
tmnxPimNgGlobalGroupV10v0,
tmnxPimNgIfStatsV10v0Group,
tmnxPimNgMvpnExtranetGroupV10v0,
tmnxPimNgGlobalGrpSrcV10v0Group,
tmnxPimNgMVPNSndrRecvV11v0Group,
tmnxPimNgFastFailover11v0Group,
tmnxPimNgInterASMvpnV11v0Group,
tmnxPimNgCDV12v0Grp,
tmnxPimNgMvpnSrcPrefixV12v0Grp,
tmnxPimNgSgStatcExtrntV12v0Grp,
tmnxPimNgUnicastRtRemV12v0Group,
tmnxPimNgMcastInbandSigV13v0Grp,
tmnxPimNgMulticastSpmsiV13v0Grp,
tmnxPimAsmExtranetV13v0Grp,
tmnxPimNgIfV13v0Group,
tmnxPimNgObsoletedV13v0Group,
tmnxPimNgGenV14v0Group,
tmnxPimNgDataMtPlcyV14v0Group,
tmnxPimNgGenStatMdtsV14v0Group,
tmnxPimNgDMAutoRpV14v0Group,
tmnxPimNgNotifyObjsV14v0Group,
tmnxPimNgNotificationV14v0Group
}
::= { tmnxPimNgCompliances 9 }
tmnxPimNgV15v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 15.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGrpSrcV9v0Group,
tmnxPimNgIfGroup,
tmnxPimNgIfV14v0Group,
tmnxPimNgNotificationGroup,
tmnxPimIfSecNbrV6v0Group,
tmnxPimNgEmbeddedRPV7v0Group,
tmnxPimNgV7v0Group,
tmnxPimNgIfStatsV7v0Group,
tmnxPimNgNotificationV7v0Group,
tmnxPimNgNotifyObjsV7v0Group,
tmnxPimNgNotifyObjsV12v0Group,
tmnxPimNgMvpnV8v0Group,
tmnxPimNgEchoGroup,
tmnxPimNgIfV8v0Group,
tmnxPimNgGlobalSSMV6v1Group,
tmnxPimNgGlobalGroupV8v0,
tmnxPimNgIfIpv6BfdV9v0Group,
tmnxPimNgMvpnV9v0Group,
tmnxPimNgIfStatsV9v0Group,
tmnxPimNgIfIPMSIV9v0Group,
tmnxPimNgMvpnV9v0R4Group,
tmnxPimNgLdpEntryV10v0Group,
tmnxPimNgIfV12v0Group,
tmnxPimNgGlobalGroupV10v0,
tmnxPimNgIfStatsV10v0Group,
tmnxPimNgMvpnExtranetGroupV10v0,
tmnxPimNgGlobalGrpSrcV10v0Group,
tmnxPimNgMVPNSndrRecvV11v0Group,
tmnxPimNgFastFailover11v0Group,
tmnxPimNgInterASMvpnV11v0Group,
tmnxPimNgCDV12v0Grp,
tmnxPimNgMvpnSrcPrefixV12v0Grp,
tmnxPimNgSgStatcExtrntV12v0Grp,
tmnxPimNgUnicastRtRemV12v0Group,
tmnxPimNgMcastInbandSigV13v0Grp,
tmnxPimNgMulticastSpmsiV13v0Grp,
tmnxPimAsmExtranetV13v0Grp,
tmnxPimNgIfV13v0Group,
tmnxPimNgObsoletedV13v0Group,
tmnxPimNgGenV14v0Group,
tmnxPimNgDataMtPlcyV14v0Group,
tmnxPimNgGenStatMdtsV14v0Group,
tmnxPimNgDMAutoRpV14v0Group,
tmnxPimNgNotifyObjsV14v0Group,
tmnxPimNgNotificationV14v0Group,
tmnxPimNgVRRPAwarePim15v0Group,
tmnxPimNotifyObjsV19v0Group,
tmnxPimNgNotificationV19v0Group
}
::= { tmnxPimNgCompliances 10 }
tmnxPimNgV16v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 16.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgDataMtPlcyV16v0Group,
tmnxPimNgBIERV16v0Group
}
::= { tmnxPimNgCompliances 11 }
tmnxPimNgV19v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 19.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGroupV19v0,
tmnxPimNgIfV19v0Group,
tmnxPimNgSsmScalingV19v0Group,
tmnxPimNgIfBierSigV19v0Group,
tmnxPimNgIfTSidV19v0Group,
tmnxPimNgMulticastSpmsiV19v0Grp
}
::= { tmnxPimNgCompliances 12 }
tmnxPimNgV20v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended PIM protocol on
Nokia SROS series systems release 20.0."
MODULE
MANDATORY-GROUPS {
tmnxPimNgGlobalGroupV20v0,
tmnxPimNgMulticastSpmsiV20v0Grp,
tmnxPimNgMsSpmsiTreeSidV20v0Grp,
tmnxPimNgAfGenAutoRPV20v0Grp
}
::= { tmnxPimNgCompliances 13 }
tmnxPimNgGroups OBJECT IDENTIFIER ::= { tmnxPimNgConformance 2 }
tmnxPimNgGlobalGroup OBJECT-GROUP
OBJECTS {
vRtrPimNgGeneralTableLstChanged,
vRtrPimNgGenRowLastChanged,
vRtrPimNgGenAdminState,
vRtrPimNgGenOperState,
vRtrPimNgGenCreateInterfaces,
vRtrPimNgGenMaxMdts,
vRtrPimNgGenNonDrAttractTraffic,
vRtrPimNgGenEcmpBalance,
vRtrPimNgGenEcmpBalanceHoldTime,
vRtrPimNgGenEcmpReBlncInProg,
vRtrPimNgGenEcmpLastReBlncTime,
vRtrPimNgGenEcmpRebalanceType,
vRtrPimNgGenEcmpOptThreshold,
vRtrPimNgGenEcmpNextBalanceTime,
vRtrPimNgGenLagUsageOptimize,
vRtrPimNgAFGenTableLstChanged,
vRtrPimNgAFGenAdminState,
vRtrPimNgAFGenOperState,
vRtrPimNgAFGenCBSRPriority,
vRtrPimNgAFGenCBSRAddressType,
vRtrPimNgAFGenCBSRAddress,
vRtrPimNgAFGenCBSRAdminState,
vRtrPimNgAFGenCBSROperState,
vRtrPimNgAFGenBSRAddressType,
vRtrPimNgAFGenBSRAddress,
vRtrPimNgAFGenBSRPriority,
vRtrPimNgAFGenBSRExpiryTime,
vRtrPimNgAFGenBSRState,
vRtrPimNgAFGenBSRUpTime,
vRtrPimNgAFGenCRPAddressType,
vRtrPimNgAFGenCRPAddress,
vRtrPimNgAFGenCRPAdminState,
vRtrPimNgAFGenCRPOperState,
vRtrPimNgAFGenCRPHoldtime,
vRtrPimNgAFGenCRPPriority,
vRtrPimNgAFGenMdtDefGrpAddrType,
vRtrPimNgAFGenMdtDefGrpAddress,
vRtrPimNgAFGenMTIfIndex,
vRtrPimNgAFGenCBSRHashMaskLen,
vRtrPimNgAFGenBSRHashMaskLen,
vRtrPimNgAFGenBSRRpfIfIndex,
vRtrPimNgAFGenRpfLookupSequence,
vRtrPimNgAFGenMdtDataPrefixType,
vRtrPimNgAFGenMdtDataPrefix,
vRtrPimNgAFGenMdtDataPrefixMask,
vRtrPimNgAFGenMdtDataDlayIntrvl,
vRtrPimNgAFGenMdtDataJoinTlvPck,
vRtrPimNgAFGenRowLastChanged,
vRtrPimNgStaticRPTableLstChnged,
vRtrPimNgStaticRPRowStatus,
vRtrPimNgStaticRPRowLastChanged,
vRtrPimNgStaticRPOverride,
vRtrPimNgStGrptoRPTableLstChngd,
vRtrPimNgStGrpToRPRowStatus,
vRtrPimNgStGrpToRPRowLstChanged,
vRtrPimNgCRPGrpPrfxTblLstChnged,
vRtrPimNgCRPGrpPrefixRowStatus,
vRtrPimNgCRPGrpPrfixRowLstChngd,
vRtrPimNgCRPHoldtime,
vRtrPimNgCRPPriority,
vRtrPimNgCRPExpiryTime,
vRtrPimNgRPSetHoldtime,
vRtrPimNgRPSetPriority,
vRtrPimNgRPSetExpiryTime,
vRtrPimNgGenStatTxCrpaPdus,
vRtrPimNgGenStatTxCrpaPduErrs,
vRtrPimNgGenStatRxCrpaPdus,
vRtrPimNgGenStatRxCrpaPduDrops,
vRtrPimNgGenStatStarStarRPTypes,
vRtrPimNgGenStatStarGTypes,
vRtrPimNgGenStatSGTypes,
vRtrPimNgGenStatTxRegisters,
vRtrPimNgGenStatTxRegisterErrs,
vRtrPimNgGenStatTxNullRegisters,
vRtrPimNgGenStatTxRegTTLDrops,
vRtrPimNgGenStatForwardCrpaPdus,
vRtrPimNgGenStatFwdCrpaDrops,
vRtrPimNgGenStatTxMdtJoinTlvs,
vRtrPimNgGenStatRxMdtJoinTlvs,
vRtrPimNgGenStatTxMdtJnTlvErrs,
vRtrPimNgGenStatRxMdtJnTlvErrs,
vRtrPimNgGenStatTxActiveMdts,
vRtrPimNgGenStatRxActiveMdts,
vRtrPimNgImportJoinPrunePolicy1,
vRtrPimNgImportJoinPrunePolicy2,
vRtrPimNgImportJoinPrunePolicy3,
vRtrPimNgImportJoinPrunePolicy4,
vRtrPimNgImportJoinPrunePolicy5,
vRtrPimNgImportRegisterPolicy1,
vRtrPimNgImportRegisterPolicy2,
vRtrPimNgImportRegisterPolicy3,
vRtrPimNgImportRegisterPolicy4,
vRtrPimNgImportRegisterPolicy5,
vRtrPimNgImportBootstrapPolicy1,
vRtrPimNgImportBootstrapPolicy2,
vRtrPimNgImportBootstrapPolicy3,
vRtrPimNgImportBootstrapPolicy4,
vRtrPimNgImportBootstrapPolicy5,
vRtrPimNgExportBootstrapPolicy1,
vRtrPimNgExportBootstrapPolicy2,
vRtrPimNgExportBootstrapPolicy3,
vRtrPimNgExportBootstrapPolicy4,
vRtrPimNgExportBootstrapPolicy5,
vRtrPimNgSSMGroupTableLstChngd,
vRtrPimNgSSMGroupRowStatus,
vRtrPimNgSSMGroupRowLastChanged,
vRtrPimNgAnycastRPTableLstChngd,
vRtrPimNgAnycastRPRowStatus,
vRtrPimNgAnycastRPRowLstChanged,
vRtrPimNgSptSwOvrThdTabLstChngd,
vRtrPimNgSptSwovrThdRowStatus,
vRtrPimNgSptSwovrThdRowLstChngd,
vRtrPimNgSptSwitchoverThd,
vRtrPimNgDataMtThdTableLstChngd,
vRtrPimNgDataMtThdRowStatus,
vRtrPimNgDataMtThdRowLstChngd,
vRtrPimNgDataMtThd
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series systems."
::= { tmnxPimNgGroups 1 }
tmnxPimNgGlobalGrpSrcGroup OBJECT-GROUP
OBJECTS {
vRtrPimNgGrpSrcType,
vRtrPimNgGrpSrcRPAddrType,
vRtrPimNgGrpSrcRPAddr,
vRtrPimNgGrpSrcRpfNbrAddrType,
vRtrPimNgGrpSrcRpfNbrAddr,
vRtrPimNgGrpSrcRpfIfIndex,
vRtrPimNgGrpSrcRptRpfNbrAdrType,
vRtrPimNgGrpSrcRptRpfNbrAddr,
vRtrPimNgGrpSrcMRIBNHopAddrType,
vRtrPimNgGrpSrcMRIBNextHopAddr,
vRtrPimNgGrpSrcMRIBSrcFlags,
vRtrPimNgGrpSrcFlags,
vRtrPimNgGrpSrcUpstreamJpState,
vRtrPimNgGrpSrcUpstreamJpTimer,
vRtrPimNgGrpSrcUstrmRptJpState,
vRtrPimNgGrpSrcUstrmRptOvrdeTmr,
vRtrPimNgGrpSrcRegisterState,
vRtrPimNgGrpSrcRegisterStopTmr,
vRtrPimNgGrpSrcKeepaliveTimer,
vRtrPimNgGrpSrcNumImmediateOif,
vRtrPimNgGrpSrcNumInheritedOif,
vRtrPimNgGrpSrcNumInherRptOif,
vRtrPimNgGrpSrcNumLclRxInclIf,
vRtrPimNgGrpSrcNumLclRxExclIf,
vRtrPimNgGrpSrcNumJoinPruneIf,
vRtrPimNgGrpSrcNumLostAssertIf,
vRtrPimNgGrpSrcUpTime,
vRtrPimNgGrpSrcNumSGRptPruneOif,
vRtrPimNgGrpSrcRxRegFrmAnycstRP,
vRtrPimNgGrpSrcRslvdByRtTblType,
vRtrPimNgGrpSrcCurrFwdingRate,
vRtrPimNgGrpSrcCurrFwdingOFRate,
vRtrPimNgGrpSrcCurrFwdingHCRate,
vRtrPimNgGrpSrcGrpSptThreshold,
vRtrPimNgGrpSrcIfFlags,
vRtrPimNgGrpSrcStatFrwdedPkts,
vRtrPimNgGrpSrcStatOFFrwdedPkts,
vRtrPimNgGrpSrcStatHCFrwdedPkts,
vRtrPimNgGrpSrcStatDscrdPkts,
vRtrPimNgGrpSrcStatOFDscrdPkts,
vRtrPimNgGrpSrcStatHCDscrdPkts,
vRtrPimNgGrpSrcStatRPFMsmtch,
vRtrPimNgGrpSrcStatOFRPFMsmtch,
vRtrPimNgGrpSrcStatHCRPFMsmtch,
vRtrPimNgGrpSrcStatFrdedOct,
vRtrPimNgGrpSrcStatOFFrdedOct,
vRtrPimNgGrpSrcStatHCFrdedOct,
vRtrPimNgGrpSrcGrpAdminBw,
vRtrPimNgGrpSrcGrpEcmpOptThresh,
vRtrPimNgGrpSrcHostFlags
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series systems."
::= { tmnxPimNgGroups 2 }
tmnxPimNgIfGroup OBJECT-GROUP
OBJECTS {
vRtrPimNgIfTableLastChanged,
vRtrPimNgIfRowStatus,
vRtrPimNgIfLastChangeTime,
vRtrPimNgIfAdminState,
vRtrPimNgIfOperState,
vRtrPimNgIfHelloInterval,
vRtrPimNgIfTrackingSupport,
vRtrPimNgIfMulticastSenders,
vRtrPimNgIfAutoCreated,
vRtrPimNgIfBSMCheckRouterAlert,
vRtrPimNgIfHelloMultiplier,
vRtrPimNgIfImprovedAssert,
vRtrPimNgIfStickyDR,
vRtrPimNgIfStickyDRPriority,
vRtrPimNgIfMaxGroups,
vRtrPimNgIfEnableBfd,
vRtrPimNgIfThreeWayHello,
vRtrPimNgIfMcacPolicyName,
vRtrPimNgIfMcacUnconstrainedBW,
vRtrPimNgIfMcacConstAdminState,
vRtrPimNgIfMcacPreRsvdMandBW,
vRtrPimNgIfMcacinUseMandBw,
vRtrPimNgIfMcacinUseOpnlBw,
vRtrPimNgIfMcacAvailMandBw,
vRtrPimNgIfMcacAvailOpnlBw,
vRtrPimNgIfMcacValuesInTransit,
vRtrPimNgIfDRPriority,
vRtrPimNgIfAssertPeriod,
vRtrPimNgAFIfAdminState,
vRtrPimNgAFIfOperState,
vRtrPimNgAFIfMdtDefGrpAddrType,
vRtrPimNgAFIfMdtDefGrpAddress,
vRtrPimNgAFIfNextHelloTime,
vRtrPimNgAFIfOperDRPriority,
vRtrPimNgAFIfCurrentGroups,
vRtrPimNgAFIfMaxGroupsTillNow,
vRtrPimNgAFIfDRType,
vRtrPimNgAFIfDR,
vRtrPimNgAFIfTrackSprtOperState,
vRtrPimNgIfNeighborUpTime,
vRtrPimNgIfNeighborExpiryTime,
vRtrPimNgIfNeighborGenId,
vRtrPimNgIfNeighborDrPriority,
vRtrPimNgIfNeighborDrPriorPrsnt,
vRtrPimNgIfNeighborLanDelay,
vRtrPimNgIfNeighborLanDlayPrsnt,
vRtrPimNgIfNeighborTrckngSpprt,
vRtrPimNgIfNeighborHoldTime,
vRtrPimNgIfNeighborOvrdeIntrvl,
vRtrPimNgIfGrpSrcRPAddrType,
vRtrPimNgIfGrpSrcRPAddress,
vRtrPimNgIfGrpSrcJPState,
vRtrPimNgIfGrpSrcPrunePendTimer,
vRtrPimNgIfGrpSrcJoinPruneTimer,
vRtrPimNgIfGrpSrcJPRptState,
vRtrPimNgIfGrpSrcRptPrnePendTmr,
vRtrPimNgIfGrpSrcRptJoinPrneTmr,
vRtrPimNgIfGrpSrcAssertState,
vRtrPimNgIfGrpSrcAssertTimer,
vRtrPimNgIfGrpSrcAssertMetric,
vRtrPimNgIfGrpSrcAsrtMetricPref,
vRtrPimNgIfGrpSrcAssertRPTBit,
vRtrPimNgIfGrpSrcAsrtWinnerMtrc,
vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf,
vRtrPimNgIfGrpSrcAsrtWnrRPTBit,
vRtrPimNgIfGrpSrcAsrtWnrAddrTyp,
vRtrPimNgIfGrpSrcAsrtWinnerAddr,
vRtrPimNgIfGrpSrcUpTime,
vRtrPimNgIfGrpSrcDataMtIfIndex,
vRtrPimNgIfTxPkts,
vRtrPimNgIfTxHellos,
vRtrPimNgIfTxAsserts,
vRtrPimNgIfTxRegisterStops,
vRtrPimNgIfTxRegisterStopErrs,
vRtrPimNgIfTxBsmPdus,
vRtrPimNgIfTxBsmErrs,
vRtrPimNgIfRxPkts,
vRtrPimNgIfRxHellos,
vRtrPimNgIfRxHellosDropped,
vRtrPimNgIfRxNbrUnknown,
vRtrPimNgIfRxBadChecksumDiscard,
vRtrPimNgIfRxBadVersionDiscard,
vRtrPimNgIfRxBadEncodings,
vRtrPimNgIfRxAsserts,
vRtrPimNgIfRxAssertErrs,
vRtrPimNgIfRxRegisters,
vRtrPimNgIfRxRegisterErrs,
vRtrPimNgIfRxNullRegisters,
vRtrPimNgIfRxRegisterStops,
vRtrPimNgIfRxRegisterStopErrs,
vRtrPimNgIfRxCRPAdvNoRtrAlert,
vRtrPimNgIfRxBsmPdus,
vRtrPimNgIfRxBsmPduDrops,
vRtrPimNgIfStarStarRPTypes,
vRtrPimNgIfStarGTypes,
vRtrPimNgIfSGTypes,
vRtrPimNgIfJoinPolicyDrops,
vRtrPimNgIfRegisterPolicyDrops,
vRtrPimNgIfBtrImpPolicyDrops,
vRtrPimNgIfBtrExpPolicyDrops,
vRtrPimNgIfTxJoinPrunes,
vRtrPimNgIfRxJoinPrunes,
vRtrPimNgIfRxInvalidJoinPrunes,
vRtrPimNgIfRxInvalidRegisters,
vRtrPimNgIfRxUnknownPdus,
vRtrPimNgIfRxJoinPruneErrs,
vRtrPimNgIfRxBSMNoRouterAlertDrops,
vRtrPimNgIfRxBSMWrongIfDrops,
vRtrPimNgDataMtIfIndex,
vRtrPimNgDataMtUptime,
vRtrPimNgDataMtNumVpnSGs,
vRtrPimNgDataMtCGrpSrcState,
vRtrPimNgDataMtCGrpSrcJoinTimer,
vRtrPimNgDataMtCGrpSrcHolddownTimer,
vRtrPimNgDataMtCGrpSrcExpiryTimer,
vRtrPimNgDataMtCGrpSrcUptime,
vRtrPimNgDataMtCGrpSrcDataMtThreshold,
vRtrPimNgDataMtCGrpSrcIfIndex,
vRtrPimNgIfMcacPolicyDrops,
vRtrPimNgIfMcacLevelTblLstChngd,
vRtrPimNgIfMcacLevelRowStatus,
vRtrPimNgIfMcacLvlRowLstChngd,
vRtrPimNgIfMcacLevelBW,
vRtrPimNgIfMcacLagTableLstChngd,
vRtrPimNgIfMcacLagRowStatus,
vRtrPimNgIfMcacLagRowLstChngd,
vRtrPimNgIfMcacLagLevel
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
on Nokia SROS series systems."
::= { tmnxPimNgGroups 3 }
tmnxPimNgNotifyObjsGroup OBJECT-GROUP
OBJECTS {
vRtrPimNgNotifySourceIpType,
vRtrPimNgNotifySourceIp,
vRtrPimNgNotifyGroupAddrType,
vRtrPimNgNotifyGroupAddr,
vRtrPimNgNotifyRPAddrType,
vRtrPimNgNotifyRPAddr,
vRtrPimNgNotifyWrongRPAddrType,
vRtrPimNgNotifyWrongRPAddr,
vRtrPimNgNotifyMsgType
}
STATUS current
DESCRIPTION
"The group of objects supporting PIM notifications on Nokia SROS series
systems."
::= { tmnxPimNgGroups 4 }
tmnxPimNgNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrPimNgIfNeighborLoss,
vRtrPimNgIfNeighborUp,
vRtrPimNgInvalidJoinPrune,
vRtrPimNgInvalidRegister,
vRtrPimNgGrpInSSMRange,
vRtrPimNgBSRStateChange,
vRtrPimNgHelloDropped,
vRtrPimNgSGLimitExceeded,
vRtrPimNgReplicationLmtExceeded,
vRtrPimNgMDTLimitExceeded,
vRtrPimNgMaxGrpsLimitExceeded,
vRtrPimNgDataMtReused,
vRtrPimNgMcacPlcyDropped
}
STATUS current
DESCRIPTION
"The group of notifications supporting PIM protocol on Nokia SROS
series systems."
::= { tmnxPimNgGroups 5 }
tmnxPimNgEmbeddedRPV7v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAFGenERP,
vRtrPimNgAFGenERPAdminState,
vRtrPimNgERPGrpPrfxTblLstChnged,
vRtrPimNgERPGrpPrefixRowStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting embedded RP feature for PIM protocol
on Nokia SROS series systems."
::= { tmnxPimNgGroups 6 }
tmnxPimNgMvpnV7v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAFGenMvpnAutoDiscovery,
vRtrPimNgAFGenMvpnCMcastSignal,
vRtrPimNgAFGenMvpnGrpAddrMode,
vRtrPimNgAFGenMvpnSpmsiAutoDisc
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting PIM protocol MVPN feature on Nokia
SROS series systems."
::= { tmnxPimNgGroups 7 }
tmnxPimNgV7v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgRsvpIfRowStatus,
vRtrPimNgRsvpIfIndex,
vRtrPimNgRsvpIfOperState
}
STATUS current
DESCRIPTION
"The group of objects supporting PIM protocol tunnel interfaces on
Nokia SROS series systems."
::= { tmnxPimNgGroups 8 }
tmnxPimNgGlobalGroupV7v0 OBJECT-GROUP
OBJECTS {
vRtrPimNgGeneralTableLstChanged,
vRtrPimNgGenRowLastChanged,
vRtrPimNgGenAdminState,
vRtrPimNgGenOperState,
vRtrPimNgGenCreateInterfaces,
vRtrPimNgGenMaxMdts,
vRtrPimNgGenNonDrAttractTraffic,
vRtrPimNgGenEcmpBalance,
vRtrPimNgGenEcmpBalanceHoldTime,
vRtrPimNgGenEcmpReBlncInProg,
vRtrPimNgGenEcmpLastReBlncTime,
vRtrPimNgGenEcmpRebalanceType,
vRtrPimNgGenEcmpNextBalanceTime,
vRtrPimNgGenLagUsageOptimize,
vRtrPimNgAFGenTableLstChanged,
vRtrPimNgAFGenAdminState,
vRtrPimNgAFGenOperState,
vRtrPimNgAFGenCBSRPriority,
vRtrPimNgAFGenCBSRAddressType,
vRtrPimNgAFGenCBSRAddress,
vRtrPimNgAFGenCBSRAdminState,
vRtrPimNgAFGenCBSROperState,
vRtrPimNgAFGenBSRAddressType,
vRtrPimNgAFGenBSRAddress,
vRtrPimNgAFGenBSRPriority,
vRtrPimNgAFGenBSRExpiryTime,
vRtrPimNgAFGenBSRState,
vRtrPimNgAFGenBSRUpTime,
vRtrPimNgAFGenCRPAddressType,
vRtrPimNgAFGenCRPAddress,
vRtrPimNgAFGenCRPAdminState,
vRtrPimNgAFGenCRPOperState,
vRtrPimNgAFGenCRPHoldtime,
vRtrPimNgAFGenCRPPriority,
vRtrPimNgAFGenMdtDefGrpAddrType,
vRtrPimNgAFGenMdtDefGrpAddress,
vRtrPimNgAFGenMTIfIndex,
vRtrPimNgAFGenCBSRHashMaskLen,
vRtrPimNgAFGenBSRHashMaskLen,
vRtrPimNgAFGenBSRRpfIfIndex,
vRtrPimNgAFGenRpfLookupSequence,
vRtrPimNgAFGenMdtDataPrefixType,
vRtrPimNgAFGenMdtDataPrefix,
vRtrPimNgAFGenMdtDataPrefixMask,
vRtrPimNgAFGenMdtDataDlayIntrvl,
vRtrPimNgAFGenMdtDataJoinTlvPck,
vRtrPimNgAFGenRowLastChanged,
vRtrPimNgStaticRPTableLstChnged,
vRtrPimNgStaticRPRowStatus,
vRtrPimNgStaticRPRowLastChanged,
vRtrPimNgStaticRPOverride,
vRtrPimNgStGrptoRPTableLstChngd,
vRtrPimNgStGrpToRPRowStatus,
vRtrPimNgStGrpToRPRowLstChanged,
vRtrPimNgGenStatTxCrpaPdus,
vRtrPimNgGenStatTxCrpaPduErrs,
vRtrPimNgGenStatRxCrpaPdus,
vRtrPimNgGenStatRxCrpaPduDrops,
vRtrPimNgGenStatStarStarRPTypes,
vRtrPimNgGenStatStarGTypes,
vRtrPimNgGenStatSGTypes,
vRtrPimNgGenStatTxRegisters,
vRtrPimNgGenStatTxRegisterErrs,
vRtrPimNgGenStatTxNullRegisters,
vRtrPimNgGenStatTxRegTTLDrops,
vRtrPimNgGenStatForwardCrpaPdus,
vRtrPimNgGenStatFwdCrpaDrops,
vRtrPimNgGenStatTxMdtJoinTlvs,
vRtrPimNgGenStatRxMdtJoinTlvs,
vRtrPimNgGenStatTxMdtJnTlvErrs,
vRtrPimNgGenStatRxMdtJnTlvErrs,
vRtrPimNgGenStatTxActiveMdts,
vRtrPimNgGenStatRxActiveMdts,
vRtrPimNgImportJoinPrunePolicy1,
vRtrPimNgImportJoinPrunePolicy2,
vRtrPimNgImportJoinPrunePolicy3,
vRtrPimNgImportJoinPrunePolicy4,
vRtrPimNgImportJoinPrunePolicy5,
vRtrPimNgImportRegisterPolicy1,
vRtrPimNgImportRegisterPolicy2,
vRtrPimNgImportRegisterPolicy3,
vRtrPimNgImportRegisterPolicy4,
vRtrPimNgImportRegisterPolicy5,
vRtrPimNgImportBootstrapPolicy1,
vRtrPimNgImportBootstrapPolicy2,
vRtrPimNgImportBootstrapPolicy3,
vRtrPimNgImportBootstrapPolicy4,
vRtrPimNgImportBootstrapPolicy5,
vRtrPimNgExportBootstrapPolicy1,
vRtrPimNgExportBootstrapPolicy2,
vRtrPimNgExportBootstrapPolicy3,
vRtrPimNgExportBootstrapPolicy4,
vRtrPimNgExportBootstrapPolicy5,
vRtrPimNgSSMGroupTableLstChngd,
vRtrPimNgSSMGroupRowStatus,
vRtrPimNgSSMGroupRowLastChanged,
vRtrPimNgAnycastRPTableLstChngd,
vRtrPimNgAnycastRPRowStatus,
vRtrPimNgAnycastRPRowLstChanged,
vRtrPimNgSptSwOvrThdTabLstChngd,
vRtrPimNgSptSwovrThdRowStatus,
vRtrPimNgSptSwovrThdRowLstChngd,
vRtrPimNgSptSwitchoverThd,
vRtrPimNgDataMtThdTableLstChngd,
vRtrPimNgDataMtThdRowStatus,
vRtrPimNgDataMtThdRowLstChngd,
vRtrPimNgDataMtThd,
vRtrPimNgCRPGpPfxInetTblLstChngd,
vRtrPimNgCRPGrpPrfxInetRowStatus,
vRtrPimNgCRPGrpPfxInetRowLstChgd,
vRtrPimNgCRPInetHoldtime,
vRtrPimNgCRPInetPriority,
vRtrPimNgCRPInetExpiryTime,
vRtrPimNgRPSetInetHoldtime,
vRtrPimNgRPSetInetPriority,
vRtrPimNgRPSetInetExpiryTime
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series systems."
::= { tmnxPimNgGroups 9 }
tmnxPimNgObsoleteV7v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgCRPGrpPrfxTblLstChnged,
vRtrPimNgCRPGrpPrefixRowStatus,
vRtrPimNgCRPGrpPrfixRowLstChngd,
vRtrPimNgCRPHoldtime,
vRtrPimNgCRPPriority,
vRtrPimNgCRPExpiryTime,
vRtrPimNgRPSetHoldtime,
vRtrPimNgRPSetPriority,
vRtrPimNgRPSetExpiryTime
}
STATUS current
DESCRIPTION
"The group of objects in TIMETRA-PIM-NG-MIB which are obsoleted in
Nokia SROS 7.0 series systems."
::= { tmnxPimNgGroups 10 }
tmnxPimIfSecNbrV6v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfSecNbrTblLstChanged,
vRtrPimNgIfSecNbrAddrType,
vRtrPimNgIfSecNbrAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interface
neighbors on Nokia SROS 6.0 series systems."
::= { tmnxPimNgGroups 11 }
tmnxPimNgIfStatsV7v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfTxIntraASAD,
vRtrPimNgIfRxIntraASAD,
vRtrPimNgIfRxIntraASADErrs,
vRtrPimNgIfTxInterASAD,
vRtrPimNgIfRxInterASAD,
vRtrPimNgIfRxInterASADErrs,
vRtrPimNgIfTxSpmsiAD,
vRtrPimNgIfRxSpmsiAD,
vRtrPimNgIfRxSpmsiADErrs,
vRtrPimNgIfTxLeafAD,
vRtrPimNgIfRxLeafAD,
vRtrPimNgIfRxLeafADErrs,
vRtrPimNgIfTxSrcActAD,
vRtrPimNgIfRxSrcActAD,
vRtrPimNgIfTxSrcActADErrs,
vRtrPimNgIfTxSharedTreeJoin,
vRtrPimNgIfRxSharedTreeJoin,
vRtrPimNgIfRxSharedTreeJoinErrs,
vRtrPimNgIfTxSrcTreeJoin,
vRtrPimNgIfRxSrcTreeJoin,
vRtrPimNgIfRxSrcTreeJoinErrs,
vRtrPimNgIfTxBgpPkts,
vRtrPimNgIfRxBgpPkts
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interface
statistics on Nokia SROS series systems."
::= { tmnxPimNgGroups 12 }
tmnxPimNgObsoleteV6v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgGenEcmpOptThreshold
}
STATUS current
DESCRIPTION
"The group of objects in TIMETRA-PIM-NG-MIB which are obsoleted in
Nokia SROS series systems."
::= { tmnxPimNgGroups 13 }
tmnxPimNgNotificationV7v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrPimNgInvalidIPmsiTunnel
}
STATUS current
DESCRIPTION
"The group of notifications supporting PIM protocol on 7.0 release of
Nokia SROS series systems."
::= { tmnxPimNgGroups 14 }
tmnxPimNgNotifyObjsV7v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgWrongMdtDefGrpAddrType,
vRtrPimNgWrongMdtDefGrpAddr
}
STATUS current
DESCRIPTION
"The group of objects added in the 7.0 release to support PIM
notifications."
::= { tmnxPimNgGroups 15 }
tmnxPimNgMvpnV8v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAFGenMvpnUMHSelection,
vRtrPimNgAFGenMvpnIntersiteShrd
}
STATUS current
DESCRIPTION
"The group of objects supporting PIM protocol MVPN feature on Nokia
SROS 8.0 series systems."
::= { tmnxPimNgGroups 16 }
tmnxPimNgEchoGroup OBJECT-GROUP
OBJECTS {
vRtrPimNgIfInstantPruneEcho
}
STATUS current
DESCRIPTION
"The group of objects supporting the management of extended PIM Instant
Prune Echo capabilities on Nokia SROS systems."
::= { tmnxPimNgGroups 17 }
tmnxPimNgIfV8v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgRsvpPmsiIfIndex,
vRtrPimNgRsvpPmsiUptime,
vRtrPimNgRsvpPmsiNumVpnSGs,
vRtrPimRsvpPmsiCGrpSrcState,
vRtrPimRsvpPmsiCGrpSrcJoinTimer,
vRtrPimRsvpPmsiCGrpSrcHldDnTimer,
vRtrPimRsvpPmsiCGrpSrcExpTimer,
vRtrPimRsvpPmsiCGrpSrcUptime,
vRtrPimDataMtCGrpSrcDataThresh,
vRtrPimRsvpPmsiCGrpSrcIfIndex
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
on Nokia SROS 8.0 series systems."
::= { tmnxPimNgGroups 19 }
tmnxPimNgGlobalSSMV6v1Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAFGenSSMDefRangeDisabl
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS 6.1 series systems."
::= { tmnxPimNgGroups 20 }
tmnxPimNgGlobalGroupV8v0 OBJECT-GROUP
OBJECTS {
vRtrPimNgGeneralTableLstChanged,
vRtrPimNgGenRowLastChanged,
vRtrPimNgGenAdminState,
vRtrPimNgGenOperState,
vRtrPimNgGenCreateInterfaces,
vRtrPimNgGenMaxMdts,
vRtrPimNgGenNonDrAttractTraffic,
vRtrPimNgGenEcmpBalance,
vRtrPimNgGenEcmpBalanceHoldTime,
vRtrPimNgGenEcmpReBlncInProg,
vRtrPimNgGenEcmpLastReBlncTime,
vRtrPimNgGenEcmpRebalanceType,
vRtrPimNgGenEcmpNextBalanceTime,
vRtrPimNgGenLagUsageOptimize,
vRtrPimNgAFGenTableLstChanged,
vRtrPimNgAFGenAdminState,
vRtrPimNgAFGenOperState,
vRtrPimNgAFGenCBSRPriority,
vRtrPimNgAFGenCBSRAddressType,
vRtrPimNgAFGenCBSRAddress,
vRtrPimNgAFGenCBSRAdminState,
vRtrPimNgAFGenCBSROperState,
vRtrPimNgAFGenBSRAddressType,
vRtrPimNgAFGenBSRAddress,
vRtrPimNgAFGenBSRPriority,
vRtrPimNgAFGenBSRExpiryTime,
vRtrPimNgAFGenBSRState,
vRtrPimNgAFGenBSRUpTime,
vRtrPimNgAFGenCRPAddressType,
vRtrPimNgAFGenCRPAddress,
vRtrPimNgAFGenCRPAdminState,
vRtrPimNgAFGenCRPOperState,
vRtrPimNgAFGenCRPHoldtime,
vRtrPimNgAFGenCRPPriority,
vRtrPimNgAFGenMdtDefGrpAddrType,
vRtrPimNgAFGenMdtDefGrpAddress,
vRtrPimNgAFGenMTIfIndex,
vRtrPimNgAFGenCBSRHashMaskLen,
vRtrPimNgAFGenBSRHashMaskLen,
vRtrPimNgAFGenBSRRpfIfIndex,
vRtrPimNgAFGenRpfLookupSequence,
vRtrPimNgAFGenMdtDataPrefixType,
vRtrPimNgAFGenMdtDataPrefix,
vRtrPimNgAFGenMdtDataPrefixMask,
vRtrPimNgAFGenMdtDataDlayIntrvl,
vRtrPimNgAFGenMdtDataJoinTlvPck,
vRtrPimNgAFGenRowLastChanged,
vRtrPimNgStaticRPTableLstChnged,
vRtrPimNgStaticRPRowStatus,
vRtrPimNgStaticRPRowLastChanged,
vRtrPimNgStaticRPOverride,
vRtrPimNgStGrptoRPTableLstChngd,
vRtrPimNgStGrpToRPRowStatus,
vRtrPimNgStGrpToRPRowLstChanged,
vRtrPimNgGenStatTxCrpaPdus,
vRtrPimNgGenStatTxCrpaPduErrs,
vRtrPimNgGenStatRxCrpaPdus,
vRtrPimNgGenStatRxCrpaPduDrops,
vRtrPimNgGenStatStarStarRPTypes,
vRtrPimNgGenStatStarGTypes,
vRtrPimNgGenStatSGTypes,
vRtrPimNgGenStatTxRegisters,
vRtrPimNgGenStatTxRegisterErrs,
vRtrPimNgGenStatTxNullRegisters,
vRtrPimNgGenStatTxRegTTLDrops,
vRtrPimNgGenStatForwardCrpaPdus,
vRtrPimNgGenStatFwdCrpaDrops,
vRtrPimNgGenStatTxMdtJoinTlvs,
vRtrPimNgGenStatRxMdtJoinTlvs,
vRtrPimNgGenStatTxMdtJnTlvErrs,
vRtrPimNgGenStatRxMdtJnTlvErrs,
vRtrPimNgGenStatTxActiveMdts,
vRtrPimNgGenStatRxActiveMdts,
vRtrPimNgImportJoinPrunePolicy1,
vRtrPimNgImportJoinPrunePolicy2,
vRtrPimNgImportJoinPrunePolicy3,
vRtrPimNgImportJoinPrunePolicy4,
vRtrPimNgImportJoinPrunePolicy5,
vRtrPimNgImportRegisterPolicy1,
vRtrPimNgImportRegisterPolicy2,
vRtrPimNgImportRegisterPolicy3,
vRtrPimNgImportRegisterPolicy4,
vRtrPimNgImportRegisterPolicy5,
vRtrPimNgImportBootstrapPolicy1,
vRtrPimNgImportBootstrapPolicy2,
vRtrPimNgImportBootstrapPolicy3,
vRtrPimNgImportBootstrapPolicy4,
vRtrPimNgImportBootstrapPolicy5,
vRtrPimNgExportBootstrapPolicy1,
vRtrPimNgExportBootstrapPolicy2,
vRtrPimNgExportBootstrapPolicy3,
vRtrPimNgExportBootstrapPolicy4,
vRtrPimNgExportBootstrapPolicy5,
vRtrPimNgSSMGroupTableLstChngd,
vRtrPimNgSSMGroupRowStatus,
vRtrPimNgSSMGroupRowLastChanged,
vRtrPimNgAnycastRPTableLstChngd,
vRtrPimNgAnycastRPRowStatus,
vRtrPimNgAnycastRPRowLstChanged,
vRtrPimNgSptSwOvrThdTabLstChngd,
vRtrPimNgSptSwovrThdRowStatus,
vRtrPimNgSptSwovrThdRowLstChngd,
vRtrPimNgSptSwitchoverThd,
vRtrPimNgDataMtThdTableLstChngd,
vRtrPimNgDataMtThdRowStatus,
vRtrPimNgDataMtThdRowLstChngd,
vRtrPimNgDataMtThd,
vRtrPimNgCRPGpPfxInetTblLstChngd,
vRtrPimNgCRPGrpPrfxInetRowStatus,
vRtrPimNgCRPGrpPfxInetRowLstChgd,
vRtrPimNgCRPInetHoldtime,
vRtrPimNgCRPInetPriority,
vRtrPimNgCRPInetExpiryTime,
vRtrPimNgRPSetInetHoldtime,
vRtrPimNgRPSetInetPriority,
vRtrPimNgRPSetInetExpiryTime,
vRtrPimNgGenEcmpHashingEnabled,
vRtrPimNgGenEnableMdtSpt,
vRtrPimNgGenStatTxSpmsiLimitHits
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series systems."
::= { tmnxPimNgGroups 21 }
tmnxPimNgGlobalGrpSrcV9v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgGrpSrcType,
vRtrPimNgGrpSrcRPAddrType,
vRtrPimNgGrpSrcRPAddr,
vRtrPimNgGrpSrcRpfNbrAddrType,
vRtrPimNgGrpSrcRpfNbrAddr,
vRtrPimNgGrpSrcRpfIfIndex,
vRtrPimNgGrpSrcRptRpfNbrAdrType,
vRtrPimNgGrpSrcRptRpfNbrAddr,
vRtrPimNgGrpSrcMRIBNHopAddrType,
vRtrPimNgGrpSrcMRIBNextHopAddr,
vRtrPimNgGrpSrcMRIBSrcFlags,
vRtrPimNgGrpSrcFlags,
vRtrPimNgGrpSrcUpstreamJpState,
vRtrPimNgGrpSrcUpstreamJpTimer,
vRtrPimNgGrpSrcUstrmRptJpState,
vRtrPimNgGrpSrcUstrmRptOvrdeTmr,
vRtrPimNgGrpSrcRegisterState,
vRtrPimNgGrpSrcRegisterStopTmr,
vRtrPimNgGrpSrcKeepaliveTimer,
vRtrPimNgGrpSrcNumImmediateOif,
vRtrPimNgGrpSrcNumInheritedOif,
vRtrPimNgGrpSrcNumInherRptOif,
vRtrPimNgGrpSrcNumLclRxInclIf,
vRtrPimNgGrpSrcNumLclRxExclIf,
vRtrPimNgGrpSrcNumJoinPruneIf,
vRtrPimNgGrpSrcNumLostAssertIf,
vRtrPimNgGrpSrcUpTime,
vRtrPimNgGrpSrcNumSGRptPruneOif,
vRtrPimNgGrpSrcRxRegFrmAnycstRP,
vRtrPimNgGrpSrcRslvdByRtTblType,
vRtrPimNgGrpSrcCurrFwdingRate,
vRtrPimNgGrpSrcCurrFwdingOFRate,
vRtrPimNgGrpSrcCurrFwdingHCRate,
vRtrPimNgGrpSrcGrpSptThreshold,
vRtrPimNgGrpSrcIfFlags,
vRtrPimNgGrpSrcStatFrwdedPkts,
vRtrPimNgGrpSrcStatOFFrwdedPkts,
vRtrPimNgGrpSrcStatHCFrwdedPkts,
vRtrPimNgGrpSrcStatDscrdPkts,
vRtrPimNgGrpSrcStatOFDscrdPkts,
vRtrPimNgGrpSrcStatHCDscrdPkts,
vRtrPimNgGrpSrcStatRPFMsmtch,
vRtrPimNgGrpSrcStatOFRPFMsmtch,
vRtrPimNgGrpSrcStatHCRPFMsmtch,
vRtrPimNgGrpSrcStatFrdedOct,
vRtrPimNgGrpSrcStatOFFrdedOct,
vRtrPimNgGrpSrcStatHCFrdedOct,
vRtrPimNgGrpSrcGrpAdminBw,
vRtrPimNgGrpSrcGrpEcmpOptThresh,
vRtrPimNgGrpSrcHostFlags,
vRtrPimNgGrpSrcGrpIfFlags,
vRtrPimNgGenStatRxCtrlPduIfDrops,
vRtrPimNgGenStatP2mpPmsiReqFails,
vRtrPimNgGenStatP2mpPmsiCrtFails,
vRtrPimNgGrpSrcSpmsiRpfIfIndex,
vRtrPimNgGrpSrcSpmsiIfIndex,
vRtrPimNgGenStatTxMdts,
vRtrPimNgGenStatRxMdts
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 9.0 systems."
::= { tmnxPimNgGroups 22 }
tmnxPimNgIfIpv6BfdV9v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfIpv6EnableBfd
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
on Nokia SROS 9.0 series systems."
::= { tmnxPimNgGroups 23 }
tmnxPimNgNotifyObjsV8v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgWrongPmsiType,
vRtrPimNgWrongPmsiP2mpId,
vRtrPimNgWrongPmsiTunnelId,
vRtrPimNgWrongPmsiExtTunlAdrTyp,
vRtrPimNgWrongPmsiExtTunlAddr,
vRtrPimNgWrongVprnId
}
STATUS current
DESCRIPTION
"The group of objects added in the 8.0 R5 release to support PIM
notifications."
::= { tmnxPimNgGroups 24 }
tmnxPimNgLdpEntryV10v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgLdpPmsiIfIndex,
vRtrPimNgLdpPmsiUptime,
vRtrPimNgLdpPmsiNumVpnSGs,
vRtrPimLdpPmsiCGrpSrcState,
vRtrPimLdpPmsiCGrpSrcJoinTimer,
vRtrPimLdpPmsiCGrpSrcHldDnTimer,
vRtrPimLdpPmsiCGrpSrcExpTimer,
vRtrPimLdpPmsiCGrpSrcUptime,
vRtrPimLdpDataMtCGrpSrcDataThres,
vRtrPimLdpPmsiCGrpSrcIfIndex,
vRtrPimNgLdpPmsiIfType
}
STATUS current
DESCRIPTION
"The group of objects supporting management of mLDP PMSI interfaces on
Nokia SROS 10.0 series systems."
::= { tmnxPimNgGroups 25 }
tmnxPimNgNotifyObjsV9v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgWrongPmsiLdpLspId,
vRtrPimNgWrongPmsiSenderAdrTyp,
vRtrPimNgWrongPmsiSenderAddr
}
STATUS current
DESCRIPTION
"The group of objects added in the 9.0 release to support PIM
notifications."
::= { tmnxPimNgGroups 26 }
tmnxPimNgObsoletedV9v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAFGenMvpnAutoDiscovery
}
STATUS current
DESCRIPTION
"The group of objects obsoleted in release 9.0 of Nokia SROS series
systems."
::= { tmnxPimNgGroups 27 }
tmnxPimNgMvpnV9v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAFGenMvpnCMcastSignal,
vRtrPimNgAFGenMvpnGrpAddrMode,
vRtrPimNgAFGenMvpnSpmsiAutoDisc,
vRtrPimNgAFGenMvpnAD
}
STATUS current
DESCRIPTION
"The group of objects supporting PIM protocol MVPN feature on Nokia
SROS series systems."
::= { tmnxPimNgGroups 28 }
tmnxPimNgIfStatsV9v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfTxMdtSafi,
vRtrPimNgIfRxMdtSafi,
vRtrPimNgIfRxMdtSafiErrs
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interface
statistics on Nokia SROS 9.0 series systems."
::= { tmnxPimNgGroups 29 }
tmnxPimNgIfV10v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfP2mpLdpTreeJoin,
vRtrPimNgIfExtranetType,
vRtrPimNgIfExtranetMvpnId,
vRtrPimNgRsvpPmsiIfType
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
on Nokia SROS 10.0 series systems."
::= { tmnxPimNgGroups 30 }
tmnxPimNgIfIPMSIV9v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgRsvpIPmsiExtTunlAdrType,
vRtrPimNgRsvpIPmsiExtTunnelAddr,
vRtrPimNgRsvpIPmsiLspName,
vRtrPimNgRsvpIPmsiP2MPId,
vRtrPimNgRsvpIPmsiTunnelId,
vRtrPimNgLdpIPmsiRootAddrType,
vRtrPimNgLdpIPmsiRootAddr,
vRtrPimNgLdpIPmsiLspId,
vRtrPimNgLdpIPmsiLspName
}
STATUS current
DESCRIPTION
"The group of objects supporting management of IPMSI interfaces on
Nokia SROS 9.0 series systems."
::= { tmnxPimNgGroups 31 }
tmnxPimNgMvpnV9v0R4Group OBJECT-GROUP
OBJECTS {
vRtrPimNgMvpnUMHPETblLastChg,
vRtrPimNgMvpnUMHPERowStatus,
vRtrPimNgMvpnUMHPELastChanged,
vRtrPimNgMvpnUMHPEStandbyAdrTyp,
vRtrPimNgMvpnUMHPEStandbyAddr,
vRtrPimNgGrpSrcRpfSecNbrAddrTyp,
vRtrPimNgGrpSrcRpfSecNbrAddr,
vRtrPimNgGrpSrcRpfSecIfIndex,
vRtrPimNgAFGenMdtDataGrpAddrMode,
vRtrPimNgAFGenEnableAsmDataMdt
}
STATUS current
DESCRIPTION
"The group of objects supporting PIM protocol MVPN feature on version
9.0R4 Nokia SROS series systems."
::= { tmnxPimNgGroups 32 }
tmnxPimNgGlobalGroupV10v0 OBJECT-GROUP
OBJECTS {
vRtrPimNgAfGenAutoRPDiscovery,
vRtrPimNgAfGenSSMAsrtCompMode
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series systems."
::= { tmnxPimNgGroups 33 }
tmnxPimNgIfStatsV10v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfRxAutoRpGenErrs,
vRtrPimNgIfRxAutoRpAnnounce,
vRtrPimNgIfTxAutoRpAnnounce,
vRtrPimNgIfRxAutoRpAnnounceErrs,
vRtrPimNgIfTxAutoRpAnnounceErrs,
vRtrPimNgIfRxAutoRpMapping,
vRtrPimNgIfTxAutoRpMapping,
vRtrPimNgIfRxAutoRpMappingErrs,
vRtrPimNgIfTxAutoRpMappingErrs
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interface
statistics on Nokia SROS 10.0 series systems."
::= { tmnxPimNgGroups 34 }
tmnxPimNgMvpnExtranetGroupV10v0 OBJECT-GROUP
OBJECTS {
vRtrPimNgMvpnExtranetRecvRefCnt
}
STATUS current
DESCRIPTION
"The group of objects supporting PIM protocol MVPN feature on Nokia
SROS series systems."
::= { tmnxPimNgGroups 35 }
tmnxPimNgGlobalGrpSrcV10v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgGrpSrcAdvtAddrType,
vRtrPimNgGrpSrcAdvtAddr
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 10.0 systems"
::= { tmnxPimNgGroups 37 }
tmnxPimNgMVPNSndrRecvV11v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAfGenMdtType
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 11.0 systems."
::= { tmnxPimNgGroups 38 }
tmnxPimNgFastFailover11v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAfGenMcastFastFailover,
vRtrPimNgGrpSrcStdbyMRIBSrcFlags,
vRtrPimNgGrpSrcStdbyUpJpState,
vRtrPimNgGrpSrcStdbyUpJpTimer
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 11.0 systems."
::= { tmnxPimNgGroups 39 }
tmnxPimNgInterASMvpnV11v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgGenRpfVectorFlags,
vRtrPimNgIfNeighborJASupport,
vRtrPimNgIfRxJoinPrunesMvpnRpfv,
vRtrPimNgIfTxJoinPrunesMvpnRpfv,
vRtrPimNgIfRxInvalidJPMvpnRpfv,
vRtrPimNgGrpSrcStdbyUpJpTimer,
vRtrPimNgGrpSrcDSRpfvNbrType,
vRtrPimNgGrpSrcDSRpfvNbr,
vRtrPimNgGrpSrcDSRpfvProxyType,
vRtrPimNgGrpSrcDSRpfvProxy,
vRtrPimNgGrpSrcDSRpfvRD,
vRtrPimNgGrpSrcDSRpfvType,
vRtrPimNgGrpSrcUPRpfvNbrType,
vRtrPimNgGrpSrcUPRpfvNbr,
vRtrPimNgGrpSrcUPRpfvProxyType,
vRtrPimNgGrpSrcUPRpfvProxy,
vRtrPimNgGrpSrcUPRpfvRD,
vRtrPimNgGrpSrcUPRpfvType,
vRtrPimNgIfGrpSrcRpfvPrxyAddrTyp,
vRtrPimNgIfGrpSrcRpfvProxyAddr,
vRtrPimNgIfGrpSrcRpfvRD,
vRtrPimNgIfGrpSrcRpfvType,
vRtrPimNgIfGrpSrcRpfvIfWinner,
vRtrPimNgIfGrpSrcRpfvNbrWinner,
vRtrPimNgGrpSrcRpfvFlags
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 11.0 systems."
::= { tmnxPimNgGroups 40 }
tmnxPimNgCDV12v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgAFGenSourceAddressType,
vRtrPimNgAFGenSourceAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting Core Diversity feature on Nokia SROS
series 12.0 systems."
::= { tmnxPimNgGroups 41 }
tmnxPimNgMvpnSrcPrefixV12v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgMvpnSrcPrefixRowStatus,
vRtrPimNgMvpnSrcPrefixRowLastChg,
vRtrPimNgMvpnSrcPrefixTblLstChg,
vRtrPimNgGrpSrcState,
vRtrPimNgAfGenMvpnPersistSA
}
STATUS current
DESCRIPTION
"The group of objects supporting source selection per multicast group
feature on Nokia SROS series 12.0 systems."
::= { tmnxPimNgGroups 42 }
tmnxPimNgSgStatcExtrntV12v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgExtranetCDRowLstChg,
vRtrPimNgExtranetCDTblLstChg,
vRtrPimNgExtranetCDMvpnId,
vRtrPimNgExtranetCDRowStatus,
vRtrPimNgAFGenGrpPrefixAny
}
STATUS current
DESCRIPTION
"The group of objects supporting Core Diversity feature on Nokia SROS
series 12.0 r4 systems."
::= { tmnxPimNgGroups 43 }
tmnxPimNgNotifyObjsV12v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgNotifySourceAddrType,
vRtrPimNgNotifySourceAddr,
vRtrPimNgNotifyDescription
}
STATUS current
DESCRIPTION
"The group of objects added in the 12.0 release to support PIM
notifications."
::= { tmnxPimNgGroups 44 }
tmnxPimNgIfV12v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfMcacUseLagPortWeight
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
added in release 12.0 of Nokia SROS."
::= { tmnxPimNgGroups 45 }
tmnxPimNgUnicastRtRemV12v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAfGenUnicastRtRemoval
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
added in release 12.0 of Nokia SROS."
::= { tmnxPimNgGroups 46 }
tmnxPimNgMcastInbandSigV13v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgIfP2mpLdpTreeJoinType,
vRtrPimNgAFGenMvpnOperCMcastSig
}
STATUS current
DESCRIPTION
"The group of objects supporting multicast inband signalling feature on
Nokia SROS series 13.0 systems."
::= { tmnxPimNgGroups 47 }
tmnxPimNgMulticastSpmsiV13v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgIfPmsiType,
vRtrPimNgDataMtSpmsiAddRxThd,
vRtrPimNgDataMtSpmsiDelRxThd,
vRtrPimLdpPmsiCGrpSrcRxCount,
vRtrPimRsvpPmsiCGrpSrcRxCount,
vRtrPimLdpPmsiCGrpSrcRxThresEnbl,
vRtrPimRsvpPmsiCGrpSrcRxThresEn
}
STATUS current
DESCRIPTION
"The group of objects supporting the multicast enhancements on Nokia
SROS series 13.0 systems."
::= { tmnxPimNgGroups 48 }
tmnxPimAsmExtranetV13v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgExtranetCDStarGFlag
}
STATUS current
DESCRIPTION
"The group of objects supporting the multicast enhancements on Nokia
SROS series 13.0 systems."
::= { tmnxPimNgGroups 49 }
tmnxPimNgIfV13v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfExtranetType,
vRtrPimNgIfExtranetMvpnId,
vRtrPimNgRsvpPmsiIfType
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
on Nokia SROS 13.0 series systems."
::= { tmnxPimNgGroups 50 }
tmnxPimNgObsoletedV13v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfP2mpLdpTreeJoin
}
STATUS current
DESCRIPTION
"The group of objects obsoleted in release 13.0 of Nokia SROS series
systems."
::= { tmnxPimNgGroups 51 }
tmnxPimNgIfV14v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfMcacIfPolicyName
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
on Nokia SROS 14.0 series systems."
::= { tmnxPimNgGroups 52 }
tmnxPimNgGenV14v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgGenEcmpHashRebalance
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS 14.0 series systems."
::= { tmnxPimNgGroups 53 }
tmnxPimNgDataMtPlcyV14v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgDataMtPlcyTblLstChg,
vRtrPimNgDataMtPlcyLspTemplate,
vRtrPimNgDataMtPlcyAdminState,
vRtrPimNgDataMtPlcyRowStatus,
vRtrPimNgDataMtPlcyRowLastChg,
vRtrPimNgDataMtPlcySGTblLstChg,
vRtrPimNgDataMtPlcySGRowStatus,
vRtrPimNgDataMtPlcySGRowLstChg,
vRtrPimNgRsvpPmsiOperState,
vRtrPimNgRsvpPmsiMultiStreamId,
vRtrPimNgLdpPmsiOperState,
vRtrPimNgLdpPmsiMultiStreamId,
vRtrPimNgGenMultiStreamSpmsi
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Multistream SPMSI on
Nokia SROS 14.0 series systems."
::= { tmnxPimNgGroups 54 }
tmnxPimNgGenStatMdtsV14v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgGenStatRxActvPsuedoMdts,
vRtrPimNgGenStatTxMsActiveMdts
}
STATUS current
DESCRIPTION
"The object supports statistic counters for SPMSI on Nokia SROS 14.0
series systems."
::= { tmnxPimNgGroups 55 }
tmnxPimNgDMAutoRpV14v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfGraftsRx,
vRtrPimNgIfGraftsTx,
vRtrPimNgIfGraftsRxErrors,
vRtrPimNgIfGraftsAckRx,
vRtrPimNgIfGraftsAckTx,
vRtrPimNgIfGraftsAckRxErrors,
vRtrPimNgIfRxAutoRpMappingRpfMM,
vRtrPimNgIfRxAutoRpAnnounceRpfMM,
vRtrPimNgGrpSrcMode,
vRtrPimNgGrpSrcPruneLimitTimer,
vRtrPimNgGrpSrcGraftRetryTimer
}
STATUS current
DESCRIPTION
"The group of objects supports statistic counters for PIM Dense Mode
Auto RP feature on Nokia SROS 14.0 series systems."
::= { tmnxPimNgGroups 56 }
tmnxPimNgNotifyObjsV14v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgNumGraftRetriesExcd
}
STATUS current
DESCRIPTION
"The group of objects added in the 14.0 release to support PIM
notifications for PIM Dense Mode Auto RP feature."
::= { tmnxPimNgGroups 57 }
tmnxPimNgNotificationV14v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrPimNgMaxGraftRetry
}
STATUS current
DESCRIPTION
"The group of notifications supporting PIM protocol for PIM Dense Mode
Auto RP feature on 14.0 release of Nokia SROS series systems."
::= { tmnxPimNgGroups 58 }
tmnxPimNgVRRPAwarePim15v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgAFIfOperGroup,
vRtrPimNgAFIfOperGroupDPAction,
vRtrPimNgAFIfOpGrpDeltaPriority
}
STATUS current
DESCRIPTION
"The group of objects supports VRRP Aware PIM feature on Nokia SROS
15.0 series systems."
::= { tmnxPimNgGroups 59 }
tmnxPimNgDataMtPlcyV16v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgDataMtPlcyGrpAddrMode,
vRtrPimNgDataMtPlcyGrpAddrType,
vRtrPimNgDataMtPlcyGrpAddr,
vRtrPimNgDataMtMultiStreamId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Multistream SPMSI for
Rosen on Nokia SROS 16.0 series systems."
::= { tmnxPimNgGroups 60 }
tmnxPimNgBIERV16v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgBierPmsiIfIndex,
vRtrPimNgBierPmsiUptime,
vRtrPimNgBierPmsiNumVpnSGs,
vRtrPimNgBierPmsiIfType,
vRtrPimNgBierPmsiOperState,
vRtrPimNgBierPmsiMultiStreamId,
vRtrPimBierPmsiCGrpSrcState,
vRtrPimBierPmsiCGrpSrcJoinTimer,
vRtrPimBierPmsiCGrpSrcHldDnTimer,
vRtrPimBierPmsiCGrpSrcExpTimer,
vRtrPimBierPmsiCGrpSrcUptime,
vRtrPimBierDataMtCGrpSrcDataTh,
vRtrPimBierPmsiCGrpSrcIfIndex,
vRtrPimBierPmsiCGrpSrcRxThEnbl,
vRtrPimBierPmsiCGrpSrcRxCount,
vRtrPimNgBierIPmsiRootAddrType,
vRtrPimNgBierIPmsiRootAddr,
vRtrPimNgBierIPmsiSubDomainId,
vRtrPimNgBierIPmsiMplsLbl,
vRtrPimNgBierIPmsiBfrId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 16.0 systems."
::= { tmnxPimNgGroups 61 }
tmnxPimNgGlobalGroupV19v0 OBJECT-GROUP
OBJECTS {
vRtrPimNgGenBgpNhOverride
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 19.0 systems."
::= { tmnxPimNgGroups 62 }
tmnxPimNgIfV19v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfBierSignalingType
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM interfaces
on Nokia SROS 19.0 series systems."
::= { tmnxPimNgGroups 63 }
tmnxPimNgSsmScalingV19v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgGenPimSsmScaling
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities for ssm scaling objects on Nokia SROS series 19.0
systems."
::= { tmnxPimNgGroups 64 }
tmnxPimNgIfBierSigV19v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgIfBierSigTransportType
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities for ssm scaling objects on Nokia SROS series 19.0
systems."
::= { tmnxPimNgGroups 65 }
tmnxPimNgIfTSidV19v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgTSidPmsiIfIndex,
vRtrPimNgTSidPmsiUptime,
vRtrPimNgTSidPmsiNumVpnSGs,
vRtrPimNgTSidPmsiIfType,
vRtrPimNgTSidPmsiOperState,
vRtrPimNgTSidPmsiMultiStreamId,
vRtrPimTSidPmsiCGrpSrcState,
vRtrPimTSidPmsiCGrpSrcJoinTimer,
vRtrPimTSidPmsiCGrpSrcHldDnTimer,
vRtrPimTSidPmsiCGrpSrcExpTimer,
vRtrPimTSidPmsiCGrpSrcUptime,
vRtrPimTSidDataMtCGrpSrcDataTh,
vRtrPimTSidPmsiCGrpSrcIfIndex,
vRtrPimTSidPmsiCGrpSrcRxThEnbl,
vRtrPimTSidPmsiCGrpSrcRxCount,
vRtrPimNgTSidIPmsiRootAddrType,
vRtrPimNgTSidIPmsiRootAddr,
vRtrPimNgTSidIPmsiTreeIdx,
vRtrPimNgTSidIPmsiLspName
}
STATUS current
DESCRIPTION
"The group of objects supporting manangement of extended PIM general
capabilities for TREE SID objects on Nokia SROS series 19.0 systems."
::= { tmnxPimNgGroups 66 }
tmnxPimNotifyObjsV19v0Group OBJECT-GROUP
OBJECTS {
vRtrPimNgNotifyBierInbInvSDId,
vRtrPimNgNotifyBierInbInvBfrId,
vRtrPimNgNotifyBierInbSAddrTyp,
vRtrPimNgNotifyBierInbSAddr,
vRtrPimNgNotifyBierInbGAddrTyp,
vRtrPimNgNotifyBierInbGAddr,
vRtrPimNgNotifyBierInbIAddrTyp,
vRtrPimNgNotifyBierInbIAddr
}
STATUS current
DESCRIPTION
"The group of notification objects added in the 19.0 release to support
PIM notifications for PIM BIER Inband feature."
::= { tmnxPimNgGroups 67 }
tmnxPimNgNotificationV19v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrPimNgBierInbInvSD,
vRtrPimNgBierInbInvBfrId
}
STATUS current
DESCRIPTION
"The group of notifications supporting PIM BIER inband feature in 19.0
release."
::= { tmnxPimNgGroups 68 }
tmnxPimNgMulticastSpmsiV19v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgDataMtSpmsiStaticPlcy
}
STATUS current
DESCRIPTION
"The group of objects supporting the multicast enhancements on Nokia
SROS series 19.0 systems."
::= { tmnxPimNgGroups 69 }
tmnxPimNgGlobalGroupV20v0 OBJECT-GROUP
OBJECTS {
vRtrPimNgGenMtuOverHead
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended PIM general
capabilities on Nokia SROS series 20.0 systems."
::= { tmnxPimNgGroups 70 }
tmnxPimNgMulticastSpmsiV20v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgIfPmsiType
}
STATUS current
DESCRIPTION
"The group of objects supporting the multicast enhancements on Nokia
SROS series 20.0 systems."
::= { tmnxPimNgGroups 71 }
tmnxPimNgMsSpmsiTreeSidV20v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgDataMtSpmsiSRPlcy
}
STATUS current
DESCRIPTION
"The group of objects supporting the multicast enhancements for Tree
Sid feature on Nokia SROS series 20.0 systems."
::= { tmnxPimNgGroups 72 }
tmnxPimNgAfGenAutoRPV20v0Grp OBJECT-GROUP
OBJECTS {
vRtrPimNgAfGenAutoRPCandidate,
vRtrPimNgAfGenAutoRPMappingAgent,
vRtrPimNgAfGenAutoRPMAIUAddrType,
vRtrPimNgAfGenAutoRPMAIUAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting the multicast enhancements for auto-rp
feature on Nokia SROS series 20.0 systems."
::= { tmnxPimNgGroups 73 }
vRtrPimNgNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 50 }
vRtrPimNgNotifications OBJECT IDENTIFIER ::= { vRtrPimNgNotifyPrefix 0 }
vRtrPimNgIfNeighborLoss NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfNeighborUpTime
}
STATUS current
DESCRIPTION
"A vRtrPimNgIfNeighborLoss notification is generated when the PIM
adjacency with a neighbor is lost."
::= { vRtrPimNgNotifications 1 }
vRtrPimNgIfNeighborUp NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfNeighborUpTime
}
STATUS current
DESCRIPTION
"A vRtrPimNgIfNeighborUp notification is generated when the PIM
adjacency with a new neighbor is established."
::= { vRtrPimNgNotifications 2 }
vRtrPimNgInvalidJoinPrune NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfRxInvalidJoinPrunes,
vRtrPimNgNotifySourceIpType,
vRtrPimNgNotifySourceIp,
vRtrPimNgNotifyGroupAddrType,
vRtrPimNgNotifyGroupAddr,
vRtrPimNgNotifyRPAddrType,
vRtrPimNgNotifyRPAddr,
vRtrPimNgNotifyWrongRPAddrType,
vRtrPimNgNotifyWrongRPAddr
}
STATUS current
DESCRIPTION
"A vRtrPimNgInvalidJoinPrune notification is generated when an invalid
Join Prune message is received. A Join Prune message is deemed invalid
when there is an RP address disagreement between the router and the
PIM Join Prune message."
::= { vRtrPimNgNotifications 3 }
vRtrPimNgInvalidRegister NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfRxInvalidRegisters,
vRtrPimNgNotifySourceIpType,
vRtrPimNgNotifySourceIp,
vRtrPimNgNotifyGroupAddrType,
vRtrPimNgNotifyGroupAddr,
vRtrPimNgNotifyRPAddrType,
vRtrPimNgNotifyRPAddr,
vRtrPimNgNotifyWrongRPAddrType,
vRtrPimNgNotifyWrongRPAddr
}
STATUS current
DESCRIPTION
"A vRtrPimNgInvalidRegister notification is generated when an invalid
PIM Register message is received. A Register message is deemed invalid
when there is an RP address disagreement between the router and the
PIM Register message."
::= { vRtrPimNgNotifications 4 }
vRtrPimNgGrpInSSMRange NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfRxPkts,
vRtrPimNgNotifySourceIpType,
vRtrPimNgNotifySourceIp,
vRtrPimNgNotifyGroupAddrType,
vRtrPimNgNotifyGroupAddr,
vRtrPimNgNotifyMsgType
}
STATUS current
DESCRIPTION
"A vRtrPimNgGrpInSSMRange notification is generated when the router
receives a register message, a (*,G) assert message, a (*,G) Join
Prune message or a IGMP local membership message for the group defined
in the SSM address range."
::= { vRtrPimNgNotifications 5 }
vRtrPimNgBSRStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgAFGenBSRState
}
STATUS current
DESCRIPTION
"A vRtrPimNgBSRStateChange notification is generated whenever there is
a change in the BSR state on the router. vRtrPimNgAFGenBSRState will
indicate the current BSR state."
::= { vRtrPimNgNotifications 6 }
vRtrPimNgHelloDropped NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfNeighborUpTime
}
STATUS current
DESCRIPTION
"A vRtrPimNgHelloDropped notification is generated whenever a hello is
dropped because the vRtrPimNgIfMulticastSenders flag is set to
'always'. "
::= { vRtrPimNgNotifications 7 }
vRtrPimNgSGLimitExceeded NOTIFICATION-TYPE
OBJECTS {
tmnxCardHwIndex
}
STATUS current
DESCRIPTION
"A vRtrPimNgSGLimitExceeded notification is generated when a (S,G)
record is failed to be programmed to an IOM because the supported
(S,G) limit is exceeded. This limit is currently at 16000 (S,G)
entries."
::= { vRtrPimNgNotifications 8 }
vRtrPimNgReplicationLmtExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgNotifySourceIpType,
vRtrPimNgNotifySourceIp,
vRtrPimNgNotifyGroupAddrType,
vRtrPimNgNotifyGroupAddr,
tmnxCardHwIndex
}
STATUS current
DESCRIPTION
"A vRtrPimNgReplicationLmtExceeded notification is generated when an
IOM fails to program an OIF for an (S,G) record because the
replication limit for that (S,G) on that IOM has been reached. The
replication limit per (S,G) entry on an IOM is currently 127."
::= { vRtrPimNgNotifications 9 }
vRtrPimNgMDTLimitExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrPimNgGenMaxMdts
}
STATUS current
DESCRIPTION
"A vRtrPimNgMDTLimitExceeded notification is generated when the
configuration exceeds the maximum number of Multicast
Distribution Trees (MDTs) supported on the system."
::= { vRtrPimNgNotifications 10 }
vRtrPimNgMaxGrpsLimitExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfMaxGroups
}
STATUS current
DESCRIPTION
"The vRtrPimNgMaxGrpsLimitExceeded event is generated when an attempt
is made to configure a group when vRtrPimNgAFIfCurrentGroups, the
number of groups configured on the PIM interface, is equal to
vRtrPimNgIfMaxGroups, the maximum number of groups supported on the
system."
::= { vRtrPimNgNotifications 11 }
vRtrPimNgDataMtReused NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgDataMtIfIndex,
vRtrPimNgDataMtNumVpnSGs
}
STATUS current
DESCRIPTION
"The vRtrPimNgDataMtReused event is generated when a data MDT is
reused, i.e. a C (S,G) is mapped to a data MDT that is already in use
by another C (S,G)."
::= { vRtrPimNgNotifications 12 }
vRtrPimNgMcacPlcyDropped NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgIfMcacPolicyName,
vRtrPimNgNotifyGroupAddrType,
vRtrPimNgNotifyGroupAddr,
vRtrPimNgNotifySourceAddrType,
vRtrPimNgNotifySourceAddr,
vRtrPimNgNotifyDescription
}
STATUS current
DESCRIPTION
"The vRtrPimNgMcacPlcyDropped event is generated when a PIM group is
dropped on a given interface because of applying a multicast CAC
policy given by vRtrPimNgIfMcacPolicyName."
::= { vRtrPimNgNotifications 13 }
vRtrPimNgInvalidIPmsiTunnel NOTIFICATION-TYPE
OBJECTS {
vRtrPimNgAFGenMdtDefGrpAddrType,
vRtrPimNgAFGenMdtDefGrpAddress,
vRtrPimNgNotifySourceIpType,
vRtrPimNgNotifySourceIp,
vRtrPimNgWrongMdtDefGrpAddrType,
vRtrPimNgWrongMdtDefGrpAddr,
vRtrPimNgWrongPmsiType,
vRtrPimNgWrongPmsiP2mpId,
vRtrPimNgWrongPmsiTunnelId,
vRtrPimNgWrongPmsiExtTunlAdrTyp,
vRtrPimNgWrongPmsiExtTunlAddr,
vRtrPimNgWrongVprnId,
vRtrPimNgWrongPmsiLdpLspId,
vRtrPimNgWrongPmsiSenderAdrTyp,
vRtrPimNgWrongPmsiSenderAddr
}
STATUS current
DESCRIPTION
"[CAUSE1] The vRtrPimNgInvalidIPmsiTunnel event is generated when an
invalid default core group address specified by
vRtrPimNgWrongMdtDefGrpAddr of the Multicast Distribution Tree(MDT) is
received in PIM message from vRtrPimNgNotifySourceIp, instead of the
expected address specified by vRtrPimNgAFGenMdtDefGrpAddress. It is
considered to be a misconfiguration and the message will be dropped.
This trap is intended to help network operators recognize the
misconfiguration and adjust their configurations accordingly.
[CAUSE2] This event is also generated when the tunnel type specified
by vRtrPimNgWrongPmsiType is received in PIM message from
vRtrPimNgNotifySourceIp which is different from the configured tunnel
type.
[EFFECT] The PMSI received in the PIM message from
vRtrPimNgNotifySourceIp is not processed by PIM.
[RECOVERY]: Operator needs to look and adjust the configuration of
vRtrPimNgNotifySourceIp in the VPRN specified by vRtrPimNgWrongVprnId.
The objects vRtrPimNgWrongPmsiP2mpId, vRtrPimNgWrongPmsiTunnelId and
vRtrPimNgWrongPmsiExtTunlAddr in the event vRtrPimNgInvalidIPmsiTunnel
are valid only when vRtrPimNgWrongPmsiType is 'rsvp (2)'.
The objects vRtrPimNgWrongMdtDefGrpAddrType and
vRtrPimNgWrongMdtDefGrpAddr in the event vRtrPimNgInvalidIPmsiTunnel
are valid only when vRtrPimNgWrongPmsiType is either 'pimSsm (0)' or
'pimSm (1)'.
The objects vRtrPimNgWrongPmsiLdpLspId, vRtrPimNgWrongPmsiSenderAdrTyp
and vRtrPimNgWrongPmsiSenderAddr in the event
vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType
is 'ldp (3)'."
::= { vRtrPimNgNotifications 14 }
vRtrPimNgMaxGraftRetry NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrPimNgNotifyGroupAddrType,
vRtrPimNgNotifyGroupAddr,
vRtrPimNgNotifySourceAddrType,
vRtrPimNgNotifySourceAddr,
vRtrPimNgNumGraftRetriesExcd
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrPimNgMaxGraftRetry is generated when the number of
graft retries has exceeded 10.
[EFFECT] We will stop retrying sending of graft messages and remain in
ack-pending state.
[RECOVERY] The recovery is caused by a subsequent graft ack or data
which will move the state to forwarding."
::= { vRtrPimNgNotifications 15 }
vRtrPimNgBierInbInvSD NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrPimNgNotifyBierInbInvSDId,
vRtrPimNgNotifyBierInbSAddrTyp,
vRtrPimNgNotifyBierInbSAddr,
vRtrPimNgNotifyBierInbGAddrTyp,
vRtrPimNgNotifyBierInbGAddr,
vRtrPimNgNotifyBierInbIAddrTyp,
vRtrPimNgNotifyBierInbIAddr
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrPimNgBierInbInvSD is generated when PIM receives a JP
Pdu with unsupported sub-domain id.
[EFFECT] PIM will stop processing the Join/Prune PDU.
[RECOVERY] The operator must ensure that downstream routers must have
the same sub-domain id. "
::= { vRtrPimNgNotifications 16 }
vRtrPimNgBierInbInvBfrId NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrPimNgNotifyBierInbInvBfrId,
vRtrPimNgNotifyBierInbSAddrTyp,
vRtrPimNgNotifyBierInbSAddr,
vRtrPimNgNotifyBierInbGAddrTyp,
vRtrPimNgNotifyBierInbGAddr,
vRtrPimNgNotifyBierInbIAddrTyp,
vRtrPimNgNotifyBierInbIAddr
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrPimNgBierInbInvSD is generated when PIM receives a JP
PDU with unsupported BFR id.
[EFFECT] PIM will stop processing the Join/Prune PDU.
[RECOVERY] The operator must ensure that downstream routers must have
the bfr-id within 1..4096 range. "
::= { vRtrPimNgNotifications 17 }
END
View Git Blame Copy Permalink