991 lines
37 KiB
Plaintext
991 lines
37 KiB
Plaintext
TIMETRA-CHASSIS-INTERCONNECT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE,
|
|
OBJECT-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TEXTUAL-CONVENTION,
|
|
TimeStamp, TruthValue
|
|
FROM SNMPv2-TC
|
|
tmnxChassisIndex,
|
|
tmnxChassisNotifyCpmCardSlotNum,
|
|
tmnxChassisNotifyFabricSlotNum,
|
|
tmnxCpmCardSlotNum, tmnxFabricSlotNum,
|
|
tmnxHwClass
|
|
FROM TIMETRA-CHASSIS-MIB
|
|
timetraSRMIBModules, tmnxSRConfs,
|
|
tmnxSRNotifyPrefix, tmnxSRObjs
|
|
FROM TIMETRA-GLOBAL-MIB
|
|
TmnxSFFStatus, tmnxDDMFailedObject,
|
|
tmnxDDMLaneIdOrModule
|
|
FROM TIMETRA-PORT-MIB
|
|
TmnxAdminState, TmnxPortID
|
|
FROM TIMETRA-TC-MIB
|
|
;
|
|
|
|
timetraChassisInterconMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED "201310310000Z"
|
|
ORGANIZATION "Nokia"
|
|
CONTACT-INFO
|
|
"Nokia SROS Support
|
|
Web: http://www.nokia.com"
|
|
DESCRIPTION
|
|
"This document is the SNMP MIB module for the Nokia SROS implementation
|
|
for managing the components used in connecting chassis together.
|
|
|
|
Copyright 2013-2018 Nokia. All rights reserved. Reproduction of this
|
|
document is authorized on the condition that the foregoing copyright
|
|
notice is included.
|
|
|
|
This SNMP MIB module (Specification) embodies Nokia's
|
|
proprietary intellectual property. Nokia retains all
|
|
title and ownership in the Specification, including any
|
|
revisions.
|
|
|
|
Nokia grants all interested parties a non-exclusive license to use and
|
|
distribute an unmodified copy of this Specification in connection with
|
|
management of Nokia products, and without fee, provided this copyright
|
|
notice and license appear on all copies.
|
|
|
|
This Specification is supplied `as is', and Nokia makes no warranty,
|
|
either express or implied, as to the use, operation, condition, or
|
|
performance of the Specification."
|
|
|
|
REVISION "201310310000Z"
|
|
DESCRIPTION
|
|
"Rev 0.1 31 Oct 2013 00:00
|
|
Initial version of the TIMETRA-CHASSIS-INTERCONNECT-MIB."
|
|
|
|
::= { timetraSRMIBModules 94 }
|
|
|
|
TmnxIcPortState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TmnxIcPortState specifies the state of a given interconnect port.
|
|
|
|
The possible values are:
|
|
up (1) - The port is operational
|
|
invalidConnection (2) - The point-to-point link layer is correctly
|
|
established but the logical layer has
|
|
detected that the port is connected to the
|
|
wrong far-end port
|
|
noLink (3) - The point-to-point link layer could not
|
|
be fully established
|
|
indeterminate (4) - The system cannot determine the state of
|
|
the port. Examples of when this value
|
|
is used include:
|
|
a) the state of a CPM or SFM IcPort in
|
|
the extension chassis of an XRS-40 system
|
|
when control communications with the
|
|
extension chassis is down
|
|
b) the state of a CPM or SFM IcPort when
|
|
the parent card is not physically present
|
|
or is initializing
|
|
unsupportedSff (5) - the SFF module part number is not a
|
|
supported number for the system"
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
invalidConnection (2),
|
|
noLink (3),
|
|
indeterminate (4),
|
|
unsupportedSff (5)
|
|
}
|
|
|
|
TmnxICLState ::= TEXTUAL-CONVENTION
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"TmnxICLState specifies the state of a given Inter-chassis Link (ICL)
|
|
and its interconnect ports (ICL IcPort).
|
|
|
|
The possible values are:
|
|
up (1) - The ICL is operational
|
|
invalidConnection (2) - The ICL is correctly established, but the
|
|
logical layer has detected that the port
|
|
is connected to the wrong far-end port
|
|
noLink (3) - The ICL could not be fully established
|
|
indeterminate (4) - The system cannot determine the state of
|
|
the ICL. Examples of when this value
|
|
is used include:
|
|
a) the state of an ICL IcPort in the
|
|
secondary chassis of a F2F system
|
|
when control communications with the
|
|
secondary chassis is down
|
|
b) the state of an ICL IcPort when
|
|
the parent card is not physically present
|
|
or is initializing.
|
|
|
|
This typedef was made obsolete in release 20.0."
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
invalidConnection (2),
|
|
noLink (3),
|
|
indeterminate (4)
|
|
}
|
|
|
|
tmnxChassisInterconObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 94 }
|
|
|
|
tmnxIcPortObjs OBJECT IDENTIFIER ::= { tmnxChassisInterconObjs 1 }
|
|
|
|
tmnxCpmIcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TmnxCpmIcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxCpmIcPortTable represents CPM interconnect port
|
|
information.
|
|
|
|
A Control Plane Module (CPM) interconnect port (CPM IcPort) is a port
|
|
on a CPM which provides the capability for two (or more) chassis to be
|
|
connected and communicate with each other."
|
|
::= { tmnxIcPortObjs 1 }
|
|
|
|
tmnxCpmIcPortEntry OBJECT-TYPE
|
|
SYNTAX TmnxCpmIcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each tmnxCpmIcPortEntry consists of the specific information
|
|
pertaining to a CPM interconnect port for a particular card on a given
|
|
chassis."
|
|
INDEX {
|
|
tmnxChassisIndex,
|
|
tmnxCpmCardSlotNum,
|
|
tmnxCpmIcPortNum
|
|
}
|
|
::= { tmnxCpmIcPortTable 1 }
|
|
|
|
TmnxCpmIcPortEntry ::= SEQUENCE
|
|
{
|
|
tmnxCpmIcPortNum Unsigned32,
|
|
tmnxCpmIcPortOperState TmnxIcPortState,
|
|
tmnxCpmIcPortSFFEquipped TruthValue,
|
|
tmnxCpmIcPortSFFStatus TmnxSFFStatus
|
|
}
|
|
|
|
tmnxCpmIcPortNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxCpmIcPortNum specifies a CPM interconnect port within
|
|
a particular card on a given chassis."
|
|
::= { tmnxCpmIcPortEntry 1 }
|
|
|
|
tmnxCpmIcPortOperState OBJECT-TYPE
|
|
SYNTAX TmnxIcPortState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxCpmIcPortOperState indicates the operational state
|
|
for a given CPM interconnect port."
|
|
::= { tmnxCpmIcPortEntry 2 }
|
|
|
|
tmnxCpmIcPortSFFEquipped OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxCpmIcPortSFFEquipped indicates whether or not a small
|
|
form factor (SFF) pluggable optical module (e.g. QSFP) is inserted
|
|
into the CPM interconnect port."
|
|
::= { tmnxCpmIcPortEntry 3 }
|
|
|
|
tmnxCpmIcPortSFFStatus OBJECT-TYPE
|
|
SYNTAX TmnxSFFStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxCpmIcPortSFFStatus indicates the operational status
|
|
of the inserted SFF. If tmnxCpmIcPortSFFEquipped is false, the
|
|
tmnxCpmIcPortSFFStatus will be 'not-equipped (0)', otherwise
|
|
'operational (1)' if no failure is detected."
|
|
::= { tmnxCpmIcPortEntry 4 }
|
|
|
|
tmnxSfmIcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TmnxSfmIcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortTable represents SFM interconnect port
|
|
information.
|
|
|
|
A Switch Fabric Module (SFM) interconnect port (SFM IcPort) is a port
|
|
on an SFM which provides the capability for two (or more) chassis to
|
|
be connected and communicate with each other."
|
|
::= { tmnxIcPortObjs 2 }
|
|
|
|
tmnxSfmIcPortEntry OBJECT-TYPE
|
|
SYNTAX TmnxSfmIcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each tmnxSfmIcPortEntry consists of the specific information
|
|
pertaining to an SFM interconnect port for a particular card on a
|
|
given chassis."
|
|
INDEX {
|
|
tmnxChassisIndex,
|
|
tmnxFabricSlotNum,
|
|
tmnxSfmIcPortNum
|
|
}
|
|
::= { tmnxSfmIcPortTable 1 }
|
|
|
|
TmnxSfmIcPortEntry ::= SEQUENCE
|
|
{
|
|
tmnxSfmIcPortNum Unsigned32,
|
|
tmnxSfmIcPortOperState TmnxIcPortState,
|
|
tmnxSfmIcPortSFFEquipped TruthValue,
|
|
tmnxSfmIcPortSFFStatus TmnxSFFStatus,
|
|
tmnxSfmIcPortDegradeState INTEGER,
|
|
tmnxSfmIcPortMisconSfm Unsigned32,
|
|
tmnxSfmIcPortMisconSfmIcPort Unsigned32
|
|
}
|
|
|
|
tmnxSfmIcPortNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..14)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortNum specifies an SFM interconnect port
|
|
within a particular card on a given chassis."
|
|
::= { tmnxSfmIcPortEntry 1 }
|
|
|
|
tmnxSfmIcPortOperState OBJECT-TYPE
|
|
SYNTAX TmnxIcPortState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortOperState indicates the operational state
|
|
for a given SFM interconnect port."
|
|
::= { tmnxSfmIcPortEntry 2 }
|
|
|
|
tmnxSfmIcPortSFFEquipped OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortSFFEquipped indicates whether or not a small
|
|
form factor (SFF) pluggable optical module (e.g. CXP) is inserted into
|
|
the SFM interconnect port."
|
|
::= { tmnxSfmIcPortEntry 3 }
|
|
|
|
tmnxSfmIcPortSFFStatus OBJECT-TYPE
|
|
SYNTAX TmnxSFFStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortSFFStatus indicates the operational status
|
|
of the inserted SFF. If tmnxSfmIcPortSFFEquipped is false, the
|
|
tmnxSfmIcPortSFFStatus will be 'not-equipped (0)', otherwise
|
|
'operational (1)' if no failure is detected."
|
|
::= { tmnxSfmIcPortEntry 4 }
|
|
|
|
tmnxSfmIcPortDegradeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
degraded (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortDegradeState indicates degradation of the
|
|
switch fabric that is carried over a particular SFM interconnect port.
|
|
|
|
The possible values are:
|
|
none (1) - The port is not considered as degraded.
|
|
degraded (2) - There is a degradation of the switch fabric that is
|
|
carried over the port. The port can still carry
|
|
some traffic but not at the full capacity of the
|
|
port."
|
|
::= { tmnxSfmIcPortEntry 5 }
|
|
|
|
tmnxSfmIcPortMisconSfm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortMisconSfm indicates the SFM that contains
|
|
the SFM IcPort that is incorrectly connected to this SFM IcPort.
|
|
|
|
If the value of tmnxSfmIcPortOperState is not 'invalid-connection
|
|
(2)', the value of tmnxSfmIcPortMisconSfm is '0'."
|
|
::= { tmnxSfmIcPortEntry 6 }
|
|
|
|
tmnxSfmIcPortMisconSfmIcPort OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of tmnxSfmIcPortMisconSfmIcPort indicates the SFM IcPort
|
|
that this SFM IcPort is incorrectly connected to.
|
|
|
|
If the value of tmnxSfmIcPortOperState is not 'invalid-connection
|
|
(2)', the value of tmnxSfmIcPortMisconSfmIcPort is '0'."
|
|
::= { tmnxSfmIcPortEntry 7 }
|
|
|
|
tmnxChassIcNotifObjs OBJECT IDENTIFIER ::= { tmnxChassisInterconObjs 2 }
|
|
|
|
tmnxNotifyIcPortNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique value of tmnxNotifyIcPortNum identifies the interconnect
|
|
port number within a chassis in the system."
|
|
::= { tmnxChassIcNotifObjs 1 }
|
|
|
|
tmnxInterChassisLinkObjs OBJECT IDENTIFIER ::= { tmnxChassisInterconObjs 3 }
|
|
|
|
tmnxICLTableLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLTableLastChange indicates the time, since system
|
|
startup, that a row in the tmnxICLTable last changed configuration.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
::= { tmnxInterChassisLinkObjs 1 }
|
|
|
|
tmnxICLTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TmnxICLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The tmnxICLTable has an entry for each Inter-chassis Link (ICL)
|
|
configured in the system.
|
|
|
|
An ICL is a link formed between two interconnect ports (ICL IcPort)
|
|
which allows for two chassis to be connected and to communicate with
|
|
each other. Multiple ICLs can be used for this communication.
|
|
|
|
Rows are created and destroyed using tmnxICLRowStatus.
|
|
|
|
This table was made obsolete in release 20.0."
|
|
::= { tmnxInterChassisLinkObjs 2 }
|
|
|
|
tmnxICLEntry OBJECT-TYPE
|
|
SYNTAX TmnxICLEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Each tmnxICLEntry contains the specific information pertaining to an
|
|
ICL.
|
|
|
|
This entry was made obsolete in release 20.0."
|
|
INDEX { tmnxICLNum }
|
|
::= { tmnxICLTable 1 }
|
|
|
|
TmnxICLEntry ::= SEQUENCE
|
|
{
|
|
tmnxICLNum Unsigned32,
|
|
tmnxICLRowStatus RowStatus,
|
|
tmnxICLLastChanged TimeStamp,
|
|
tmnxICLAdminState TmnxAdminState,
|
|
tmnxICLPrimaryChassisPortId TmnxPortID,
|
|
tmnxICLSecondaryChassisPortId TmnxPortID,
|
|
tmnxICLOperState TmnxICLState
|
|
}
|
|
|
|
tmnxICLNum OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLNum specifies the link identifier for the ICL.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
::= { tmnxICLEntry 1 }
|
|
|
|
tmnxICLRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLRowStatus specifies the status of this row.
|
|
|
|
It allows entries to be created and deleted in the tmnxICLTable.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
::= { tmnxICLEntry 2 }
|
|
|
|
tmnxICLLastChanged OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLLastChanged indicates the time, since system
|
|
startup, that this row last changed configuration.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
::= { tmnxICLEntry 3 }
|
|
|
|
tmnxICLAdminState OBJECT-TYPE
|
|
SYNTAX TmnxAdminState
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLAdminState specifies the administrative state of
|
|
this ICL.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
DEFVAL { outOfService }
|
|
::= { tmnxICLEntry 4 }
|
|
|
|
tmnxICLPrimaryChassisPortId OBJECT-TYPE
|
|
SYNTAX TmnxPortID
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLPrimaryChassisPortId specifies the port identifier
|
|
of the port on the primary chassis used to establish the ICL. This
|
|
port is connected to a port on the secondary chassis specified by the
|
|
value of tmnxICLSecondaryChassisPortId. The ICL is only valid when the
|
|
value of tmnxICLPrimaryChassisPortId and tmnxICLSecondaryChassisPortId
|
|
are non-default.
|
|
|
|
Only 100G or 10G Ethernet ports are permitted to be used in an ICL.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
DEFVAL { '1e000000'H }
|
|
::= { tmnxICLEntry 5 }
|
|
|
|
tmnxICLSecondaryChassisPortId OBJECT-TYPE
|
|
SYNTAX TmnxPortID
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLSecondaryChassisPortId specifies the port
|
|
identifier of the port on the secondary chassis used to establish the
|
|
ICL. This port is connected to a port on the primary chassis specified
|
|
by the value of tmnxICLPrimaryChassisPortId. The ICL is only valid
|
|
when the value of tmnxICLPrimaryChassisPortId and
|
|
tmnxICLSecondaryChassisPortId are non-default.
|
|
|
|
Only 100G or 10G Ethernet ports are permitted to be used in an ICL.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
DEFVAL { '1e000000'H }
|
|
::= { tmnxICLEntry 6 }
|
|
|
|
tmnxICLOperState OBJECT-TYPE
|
|
SYNTAX TmnxICLState
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The value of tmnxICLOperState indicates the operational state for a
|
|
given ICL.
|
|
|
|
This object was made obsolete in release 20.0."
|
|
::= { tmnxICLEntry 7 }
|
|
|
|
tmnxChassisInterconConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 94 }
|
|
|
|
tmnxChassisInterconCompliances OBJECT IDENTIFIER ::= { tmnxChassisInterconConformance 1 }
|
|
|
|
tmnxChassisInterconCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the management of chassis interconnect
|
|
capabilities on SROS series systems for release 12.0."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
tmnxChassIcNotifV12v0Group,
|
|
tmnxChassIcNotifyObjsV12v0Group,
|
|
tmnxCpmIcPortV12v0Group,
|
|
tmnxCpmIcPortNotifV12v0Group,
|
|
tmnxSfmIcPortV12v0Group,
|
|
tmnxSfmIcPortNotifV12v0Group
|
|
}
|
|
::= { tmnxChassisInterconCompliances 1 }
|
|
|
|
tmnxChassInterconComplianceV16v0 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for the management of chassis interconnect
|
|
capabilities on SROS series systems for release 16.0."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
tmnxInterChassisLinkV16v0Group
|
|
}
|
|
::= { tmnxChassisInterconCompliances 2 }
|
|
|
|
tmnxChassisInterconGroups OBJECT IDENTIFIER ::= { tmnxChassisInterconConformance 2 }
|
|
|
|
tmnxChassIcV12v0Groups OBJECT IDENTIFIER ::= { tmnxChassisInterconGroups 1 }
|
|
|
|
tmnxChassIcNotifV12v0Group NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
tmnxInterChassisCommsDown,
|
|
tmnxInterChassisCommsUp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of notifications supporting the interconnect capabilities
|
|
for the chassis on Nokia SROS series systems in release 12.0."
|
|
::= { tmnxChassIcV12v0Groups 1 }
|
|
|
|
tmnxChassIcNotifyObjsV12v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxNotifyIcPortNum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of notification-objects supporting the interconnect
|
|
capabilities for the chassis on release 12.0 of Nokia SROS series
|
|
systems."
|
|
::= { tmnxChassIcV12v0Groups 2 }
|
|
|
|
tmnxCpmIcPortV12v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxCpmIcPortOperState,
|
|
tmnxCpmIcPortSFFEquipped,
|
|
tmnxCpmIcPortSFFStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects supporting the interconnect port capabilities for
|
|
the control plane on Nokia SROS series systems in release 12.0."
|
|
::= { tmnxChassIcV12v0Groups 3 }
|
|
|
|
tmnxCpmIcPortNotifV12v0Group NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
tmnxCpmIcPortDown,
|
|
tmnxCpmIcPortUp,
|
|
tmnxCpmIcPortSFFInserted,
|
|
tmnxCpmIcPortSFFRemoved,
|
|
tmnxCpmNoLocalIcPort,
|
|
tmnxCpmLocalIcPortAvail,
|
|
tmnxCpmIcPortSFFStatusFailure,
|
|
tmnxCpmIcPortDDMFailure,
|
|
tmnxCpmIcPortDDMClear
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of notifications supporting the interconnect port
|
|
capabilities for the control plane on Nokia SROS series systems in
|
|
release 12.0."
|
|
::= { tmnxChassIcV12v0Groups 4 }
|
|
|
|
tmnxSfmIcPortV12v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxSfmIcPortOperState,
|
|
tmnxSfmIcPortSFFEquipped,
|
|
tmnxSfmIcPortSFFStatus,
|
|
tmnxSfmIcPortDegradeState,
|
|
tmnxSfmIcPortMisconSfm,
|
|
tmnxSfmIcPortMisconSfmIcPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects supporting the interconnect port capabilities for
|
|
the switch fabric on Nokia SROS series systems in release 12.0."
|
|
::= { tmnxChassIcV12v0Groups 5 }
|
|
|
|
tmnxSfmIcPortNotifV12v0Group NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
tmnxSfmIcPortDown,
|
|
tmnxSfmIcPortUp,
|
|
tmnxSfmIcPortSFFInserted,
|
|
tmnxSfmIcPortSFFRemoved,
|
|
tmnxSfmIcPortSFFStatusFailure,
|
|
tmnxSfmIcPortDDMFailure,
|
|
tmnxSfmIcPortDDMClear,
|
|
tmnxSfmIcPortDegraded,
|
|
tmnxSfmIcPortDegradedClear
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of notifications supporting the interconnect port
|
|
capabilities for the switch fabric on Nokia SROS series systems in
|
|
release 12.0."
|
|
::= { tmnxChassIcV12v0Groups 6 }
|
|
|
|
tmnxChassIcV16v0Groups OBJECT IDENTIFIER ::= { tmnxChassisInterconGroups 2 }
|
|
|
|
tmnxInterChassisLinkV16v0Group OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxICLTableLastChange,
|
|
tmnxICLRowStatus,
|
|
tmnxICLLastChanged,
|
|
tmnxICLAdminState,
|
|
tmnxICLPrimaryChassisPortId,
|
|
tmnxICLSecondaryChassisPortId,
|
|
tmnxICLOperState
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The group of objects supporting the Inter-chassis Link capabilities on
|
|
Nokia SROS series systems in release 16.0."
|
|
::= { tmnxChassIcV16v0Groups 1 }
|
|
|
|
tmnxChassIcV20v0Groups OBJECT IDENTIFIER ::= { tmnxChassisInterconGroups 3 }
|
|
|
|
tmnxICLv20v0ObsoleteGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tmnxICLTableLastChange,
|
|
tmnxICLRowStatus,
|
|
tmnxICLLastChanged,
|
|
tmnxICLAdminState,
|
|
tmnxICLPrimaryChassisPortId,
|
|
tmnxICLSecondaryChassisPortId,
|
|
tmnxICLOperState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects supporting the Inter-chassis Link capabilities
|
|
that were obsoleted on Nokia SROS series systems in release 20.0."
|
|
::= { tmnxChassIcV20v0Groups 1 }
|
|
|
|
tmnxChassisInterconNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 94 }
|
|
|
|
tmnxChassisInterconNotification OBJECT IDENTIFIER ::= { tmnxChassisInterconNotifyPrefix 0 }
|
|
|
|
tmnxInterChassisNotifications OBJECT IDENTIFIER ::= { tmnxChassisInterconNotification 1 }
|
|
|
|
tmnxInterChassisCommsDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxInterChassisCommsDown alarm is generated when the
|
|
active CPM cannot reach the far-end chassis.
|
|
|
|
[EFFECT] The resources on the far-end chassis are not available. This
|
|
event for the far-end chassis means that the CPM, SFM, and XCM cards
|
|
in the far-end chassis will reboot and remain operationally down until
|
|
communications are re-established.
|
|
|
|
[RECOVERY] Ensure that all CPM interconnect ports in the system are
|
|
properly cabled together with working cables."
|
|
::= { tmnxInterChassisNotifications 1 }
|
|
|
|
tmnxInterChassisCommsUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxInterChassisCommsUp notification is generated when the
|
|
control communications are re-established between the active CPM and
|
|
the far-end chassis.
|
|
|
|
[EFFECT] The resources on the far-end chassis are now available. This
|
|
event for the far-end chassis means that the CPM, SFM and XCM cards in
|
|
the far-end chassis will start the process of coming back into
|
|
service."
|
|
::= { tmnxInterChassisNotifications 2 }
|
|
|
|
tmnxCpmIcPortNotifications OBJECT IDENTIFIER ::= { tmnxChassisInterconNotification 2 }
|
|
|
|
tmnxCpmIcPortDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass,
|
|
tmnxCpmIcPortOperState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmIcPortDown alarm is generated when the CPM
|
|
interconnect port is not operational. The reason may be a cable
|
|
connected incorrectly, a disconnected cable, a faulty cable, or a
|
|
misbehaving CPM interconnect port or card.
|
|
|
|
[EFFECT] At least one of the control plane paths used for
|
|
inter-chassis CPM communication is not operational. Other paths may be
|
|
available.
|
|
|
|
[RECOVERY] A manual verification and testing of each CPM interconnect
|
|
port is required to ensure fully functional operation. Physical
|
|
replacement of cabling may be required."
|
|
::= { tmnxCpmIcPortNotifications 1 }
|
|
|
|
tmnxCpmIcPortUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass,
|
|
tmnxCpmIcPortOperState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmIcPortUp notification is generated when the CPM
|
|
interconnect port is operational again.
|
|
|
|
[EFFECT] A control plane communication path between CPM cards in the
|
|
different chassis have been established."
|
|
::= { tmnxCpmIcPortNotifications 2 }
|
|
|
|
tmnxCpmIcPortSFFInserted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxCpmIcPortSFFEquipped
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmIcPortSFFInserted notification is generated when
|
|
the small form factor (SFF) pluggable optical module (e.g. QSFP) is
|
|
inserted into a CPM interconnect port.
|
|
|
|
[EFFECT] This event is for notification only."
|
|
::= { tmnxCpmIcPortNotifications 3 }
|
|
|
|
tmnxCpmIcPortSFFRemoved NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxCpmIcPortSFFEquipped
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmIcPortSFFRemoved notification is generated when the
|
|
SFF (e.g. QSFP) is removed from the CPM interconnect port. Removing an
|
|
SFF causes both this trap, and also a tmnxCpmIcPortDown event.
|
|
|
|
[EFFECT] Removing the SFF will cause the CPM interconnect port to go
|
|
down. This port will no longer be able to be used as part of the
|
|
control plane between chassis but other paths may be available.
|
|
|
|
[RECOVERY] Insert a working SFF into the port."
|
|
::= { tmnxCpmIcPortNotifications 4 }
|
|
|
|
tmnxCpmNoLocalIcPort NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass,
|
|
tmnxChassisNotifyCpmCardSlotNum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmNoLocalIcPort alarm is generated when the CPM
|
|
cannot reach the other chassis using its local CPM interconnect ports.
|
|
|
|
[EFFECT] Another control communications path may still be available
|
|
between the CPM and the other chassis via the mate CPM in the same
|
|
chassis. If that alternative path is not available then complete
|
|
disruption of control communications to the other chassis will occur
|
|
and the tmnxInterChassisCommsDown alarm is raised.
|
|
|
|
A tmnxCpmNoLocalIcPort alarm on the active CPM indicates that a
|
|
further failure of the local CPM interconnect ports on the standby CPM
|
|
will cause complete disruption of control communications to the other
|
|
chassis and the tmnxInterChassisCommsDown alarm is raised.
|
|
|
|
A tmnxCpmNoLocalIcPort alarm on the standby CPM indicates that a CPM
|
|
switchover may cause temporary disruption of control communications to
|
|
the other chassis while the rebooting CPM comes back into service.
|
|
|
|
[RECOVERY] Ensure that all CPM interconnect ports in the system are
|
|
properly cabled together with working cables."
|
|
::= { tmnxCpmIcPortNotifications 5 }
|
|
|
|
tmnxCpmLocalIcPortAvail NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass,
|
|
tmnxChassisNotifyCpmCardSlotNum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmLocalIcPortAvail notification is generated when the
|
|
CPM re-establishes communication with the other chassis using its
|
|
local CPM interconnect ports.
|
|
|
|
[EFFECT] A new control communications path is now available between
|
|
the CPM and the other chassis."
|
|
::= { tmnxCpmIcPortNotifications 6 }
|
|
|
|
tmnxCpmIcPortSFFStatusFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxCpmIcPortSFFStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmIcPortSFFStatusFailure notification is generated
|
|
when the value of tmnxCpmIcPortSFFStatus results in a value other than
|
|
'not-equipped (0)', or 'operational (1)'.
|
|
|
|
[EFFECT] The SFF device is not operational and the associated CPM
|
|
interconnect port can not be used. The SFF and port will not recover
|
|
without operator intervention.
|
|
|
|
[RECOVERY] Remove and re-insert the SFF device. If the problem
|
|
persists then replace the SFF device."
|
|
::= { tmnxCpmIcPortNotifications 7 }
|
|
|
|
tmnxCpmIcPortDDMFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxChassisNotifyCpmCardSlotNum,
|
|
tmnxNotifyIcPortNum,
|
|
tmnxDDMFailedObject,
|
|
tmnxDDMLaneIdOrModule
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmIcPortDDMFailure notification is generated when an
|
|
SFF in a CPM interconnect port that supports Digital Diagnostic
|
|
Monitoring (DDM) enters a failed state."
|
|
::= { tmnxCpmIcPortNotifications 8 }
|
|
|
|
tmnxCpmIcPortDDMClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxChassisNotifyCpmCardSlotNum,
|
|
tmnxNotifyIcPortNum,
|
|
tmnxDDMFailedObject,
|
|
tmnxDDMLaneIdOrModule
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxCpmIcPortDDMFailure notification is generated when an
|
|
SFF in a CPM interconnect port that supports Digital Diagnostic
|
|
Monitoring (DDM) clears a failed state."
|
|
::= { tmnxCpmIcPortNotifications 9 }
|
|
|
|
tmnxSfmIcPortNotifications OBJECT IDENTIFIER ::= { tmnxChassisInterconNotification 3 }
|
|
|
|
tmnxSfmIcPortDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass,
|
|
tmnxSfmIcPortOperState,
|
|
tmnxSfmIcPortMisconSfm,
|
|
tmnxSfmIcPortMisconSfmIcPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortDown alarm is generated when the SFM
|
|
interconnect port is not operational. The reason may be a cable
|
|
connected incorrectly, a disconnected cable, a faulty cable, or a
|
|
misbehaving SFM interconnect port or SFM card.
|
|
|
|
[EFFECT] This port can no longer be used as part of the user plane
|
|
fabric between chassis. Other fabric paths may be available resulting
|
|
in no loss of capacity.
|
|
|
|
[RECOVERY] A manual verification and testing of each SFM interconnect
|
|
port is required to ensure fully functional operation. Physical
|
|
replacement of cabling may be required."
|
|
::= { tmnxSfmIcPortNotifications 1 }
|
|
|
|
tmnxSfmIcPortUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxHwClass,
|
|
tmnxSfmIcPortOperState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortUp notification is generated when the SFM
|
|
interconnect port is operational again.
|
|
|
|
[EFFECT] This port can now be used as part of the user plane fabric
|
|
between chassis."
|
|
::= { tmnxSfmIcPortNotifications 2 }
|
|
|
|
tmnxSfmIcPortSFFInserted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxSfmIcPortSFFEquipped
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortSFFInserted notification is generated when
|
|
the Small Form Factor (SFF) pluggable optical module (e.g. CXP) is
|
|
inserted into an SFM interconnect port.
|
|
|
|
[EFFECT] This event is for notification only."
|
|
::= { tmnxSfmIcPortNotifications 3 }
|
|
|
|
tmnxSfmIcPortSFFRemoved NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxSfmIcPortSFFEquipped
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortSFFRemoved notification is generated when the
|
|
SFF (e.g. CXP) is removed from the SFM interconnect port.
|
|
|
|
[EFFECT] Removing the module will cause the port to go down. This
|
|
port can no longer be used as part of the user plane fabric between
|
|
chassis. Other fabric paths may be available resulting in no loss of
|
|
capacity.
|
|
|
|
[RECOVERY] Insert a working SFF into the SFM interconnect port."
|
|
::= { tmnxSfmIcPortNotifications 4 }
|
|
|
|
tmnxSfmIcPortSFFStatusFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxSfmIcPortSFFStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortSFFStatusFailure notification is generated
|
|
when the value of tmnxSfmIcPortSFFStatus results in a value other than
|
|
'not-equipped (0)', or 'operational (1)'.
|
|
|
|
[EFFECT] The SFF device is not operational and the associated SFM
|
|
interconnect port can not be used. The SFF and port will not recover
|
|
without operator intervention.
|
|
|
|
[RECOVERY] Remove and re-insert the SFF device. If the problem
|
|
persists then replace the SFF device."
|
|
::= { tmnxSfmIcPortNotifications 5 }
|
|
|
|
tmnxSfmIcPortDDMFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxChassisNotifyFabricSlotNum,
|
|
tmnxNotifyIcPortNum,
|
|
tmnxDDMFailedObject,
|
|
tmnxDDMLaneIdOrModule
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortDDMFailure notification is generated when an
|
|
SFF in an SFM interconnect port that supports Digital Diagnostic
|
|
Monitoring (DDM) enters a failed state."
|
|
::= { tmnxSfmIcPortNotifications 6 }
|
|
|
|
tmnxSfmIcPortDDMClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxChassisNotifyFabricSlotNum,
|
|
tmnxNotifyIcPortNum,
|
|
tmnxDDMFailedObject,
|
|
tmnxDDMLaneIdOrModule
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortDDMFailure notification is generated when an
|
|
SFF in an SFM interconnect port that supports Digital Diagnostic
|
|
Monitoring (DDM) clears a failed state."
|
|
::= { tmnxSfmIcPortNotifications 7 }
|
|
|
|
tmnxSfmIcPortDegraded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxSfmIcPortDegradeState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortDegraded notification is generated when the
|
|
system has detected a degradation of the switch fabric that is
|
|
associated with a particular SFM interconnect port. The value of
|
|
tmnxSfmIcPortDegradeState will reflect this condition by having a
|
|
value that is NOT 'none (1)'. If the value of
|
|
tmnxSfmIcPortDegradeState is 'degraded (2)' the SFM interconnect port
|
|
can still carry some traffic but not at the full capacity of the port.
|
|
The port and attached cable are not necessarily the cause of the
|
|
degradation but are a likely cause.
|
|
|
|
[EFFECT] Switch fabric capacity on this port is reduced when
|
|
tmnxSfmIcPortDegradeState is degraded. This may not be causing any
|
|
impact to service because of redundancy in the fabric.
|
|
|
|
[RECOVERY] Although it may not be necessary to maintain full service,
|
|
replacing the affected components may restore some fabric capacity."
|
|
::= { tmnxSfmIcPortNotifications 8 }
|
|
|
|
tmnxSfmIcPortDegradedClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tmnxSfmIcPortDegradeState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"[CAUSE] The tmnxSfmIcPortDegradedClear notification is generated when
|
|
the switch fabric associated with the SFM interconnect port is not
|
|
degraded. This occurs when the value of tmnxSfmIcPortDegradeState is
|
|
'none (1)'."
|
|
::= { tmnxSfmIcPortNotifications 9 }
|
|
|
|
END
|