WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/moxa/MOXA-NPS8000-MIB

6352 lines
210 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************
-- Moxa NPort S8000 MIB
--
-- Copyright (c) 2008 by Moxa Inc.
-- All rights reserved.
--
-- Version: 1.4
-- Date: 2011/05/13
-- *****************************************************************
MOXA-NPS8000-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, IpAddress, OBJECT-TYPE
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION, MacAddress, DisplayString
FROM SNMPv2-TC;
moxa OBJECT IDENTIFIER ::= { enterprises 8691 } -- 1.3.6.1.4.1.8691
nport OBJECT IDENTIFIER ::= { moxa 2 } -- 1.3.6.1.4.1.8691.2
nps8000 MODULE-IDENTITY
LAST-UPDATED "201105130000Z"
ORGANIZATION "Moxa Inc."
CONTACT-INFO
"Postal: Moxa Inc.
Fl.4, No.135,Lane 235,Pao-Chiao Rd.
Shing Tien City,Taipei,Taiwan,R.O.C
Tel: +866-2-89191230 "
DESCRIPTION
"The MIB module for Moxa NPort S8000 series specific information."
::= { nport 12 } -- 1.3.6.1.4.1.8691.2.12
-- ------------------------------------------------------------------------------------------------
-- groups in the MOXA-NPortS8000 MIB
-- ------------------------------------------------------------------------------------------------
swMgmt OBJECT IDENTIFIER ::= { nps8000 1 } -- 1.3.6.1.4.1.8691.2.12.1
-- ------------------------------------------------------------------------------------------------
-- Textual Conventions
-- ------------------------------------------------------------------------------------------------
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
-- ------------------------------------------------------------------------------------------------
-- swMgmt group
-- ------------------------------------------------------------------------------------------------
-- ------------------------------------------------------------------------------------------------
-- overview 1.1
-- ------------------------------------------------------------------------------------------------
overview OBJECT IDENTIFIER ::= { swMgmt 1 }
modelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NPort S8455 series: Combo switch/serial device with 4 serial ports, 3 Ethernet ports, 2 fiber ports.
NPort S8458 series: Combo switch/serial device with 4 serial ports, 4 Ethernet ports, 4 fiber ports."
::= { overview 1 }
serialNo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the NPort. Every NPort S8000
series device server is assigned a unique serial
number before it is shipped."
::= { overview 2 }
firmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the firmware currently running on
the NPort."
::= { overview 3 }
viewIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the firmware currently running on
the NPort."
::= { overview 4 }
macAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the NPort's Ethernet interface."
::= { overview 5 }
upTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in human-readable notation) since the
system was last re-initialized."
::= { overview 6 }
-- ------------------------------------------------------------------------------------------------
-- Basic settings 1.2
-- ------------------------------------------------------------------------------------------------
basicSettings OBJECT IDENTIFIER ::= { swMgmt 2 }
-- ------------------------------------------------------------------------------------------------
-- Basic settings -> General Settings 1.2.1
-- ------------------------------------------------------------------------------------------------
generalSettings OBJECT IDENTIFIER ::= { basicSettings 1 }
serverName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A text string used to identify the NPort."
::= { generalSettings 1 }
serverLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A text string used to identify the location of the NPort. This
option is useful for specifying the location or
application of different NPort device servers."
::= { generalSettings 2 }
serverDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"serverDescription."
::= { generalSettings 3 }
maintainerContactInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"maintainerContactInfo."
::= { generalSettings 4 }
generalSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit general setting."
::= { generalSettings 5 }
-- ------------------------------------------------------------------------------------------------
-- Basic settings -> Time settings 1.2.2
-- ------------------------------------------------------------------------------------------------
timeSetting OBJECT IDENTIFIER ::= { basicSettings 2 }
sysDateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date time of system"
::= { timeSetting 1 }
-- ------------------------------------------------------------------------------------------------
-- Basic settings -> Time settings -> Day Linght Saving 1.2.2.2
-- ------------------------------------------------------------------------------------------------
daylightSaving OBJECT IDENTIFIER ::= { timeSetting 2 }
startMonth OBJECT-TYPE
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Month of Daylight Saving time"
::= { daylightSaving 1 }
startWeek OBJECT-TYPE
SYNTAX INTEGER { na(0), week-1(1), week-2(2), week-3(3), week-4(4), week-last(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Week of Daylight Saving time"
::= { daylightSaving 2 }
startDay OBJECT-TYPE
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Day of Daylight Saving time"
::= { daylightSaving 3 }
startHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Hour of Daylight Saving time"
::= { daylightSaving 4 }
endMonth OBJECT-TYPE
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Month of Daylight Saving time"
::= { daylightSaving 5 }
endWeek OBJECT-TYPE
SYNTAX INTEGER { na(0), week-1(1), week-2(2), week-3(3), week-4(4), week-last(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Week of Daylight Saving time"
::= { daylightSaving 6 }
endDay OBJECT-TYPE
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Day of Daylight Saving time"
::= { daylightSaving 7 }
endHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Hour of Daylight Saving time"
::= { daylightSaving 8 }
offsetHours OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Offset Hours of Daylight Saving time"
::= { daylightSaving 9 }
-- ------------------------------------------------------------------------------------------------
-- End of Day Linght Saving
-- ------------------------------------------------------------------------------------------------
timeZone OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time-zone index of the NPort."
::= { timeSetting 3 }
timeServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first time server"
::= { timeSetting 4 }
timeServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second time server"
::= { timeSetting 5 }
calibratePeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period (seconds) that calibrate with time server"
::= { timeSetting 6 }
timeSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit time setting."
::= { timeSetting 7 }
-- ------------------------------------------------------------------------------------------------
-- Basic settings -> Network settings 1.2.3
-- ------------------------------------------------------------------------------------------------
networkSettings OBJECT IDENTIFIER ::= { basicSettings 3 }
autoIPConfig OBJECT-TYPE
SYNTAX INTEGER { disable(0), dhcp(1), bootp(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The auto IP config."
::= { networkSettings 1 }
serverIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of this server."
::= { networkSettings 2 }
subMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Subnet Mask of this server."
::= { networkSettings 3 }
gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The gateway of this server."
::= { networkSettings 4 }
dnsServer1IPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first DNS Server address."
::= { networkSettings 5 }
dnsServer2IPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first DNS Server address."
::= { networkSettings 6 }
tcpAliveChkTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP alive check time."
::= { networkSettings 7 }
networkSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit network setting."
::= { networkSettings 8 }
-- ------------------------------------------------------------------------------------------------
-- Serial settings 1.3
-- ------------------------------------------------------------------------------------------------
portSetting OBJECT IDENTIFIER ::= { swMgmt 3 }
-- ------------------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings 1.3.1
-- ------------------------------------------------------------------------------------------------
opModeSetting OBJECT IDENTIFIER ::= { portSetting 1 }
-- ------------------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> Operation Modes 1.3.1.1
-- ------------------------------------------------------------------------------------------------
opMode OBJECT IDENTIFIER ::= { opModeSetting 1 }
opModePortTable OBJECT-TYPE -- 1.3.1.1.1
SYNTAX SEQUENCE OF OpModePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial ports' operation mode table."
::= { opMode 1 }
opModePortEntry OBJECT-TYPE -- 1.3.1.1.1.1
SYNTAX OpModePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial port's operation mode entry."
INDEX { portIndex }
::= { opModePortTable 1 }
OpModePortEntry ::=
SEQUENCE {
portIndex
INTEGER,
portMode
INTEGER
}
portIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial port index."
::= { opModePortEntry 1 }
portMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
realCom(1),
rfc2217(2),
tcp-Server(3),
tcp-Client(4),
udp(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The application of the serial port.
Note that changing this setting may also change the
operation mode."
::= { opModePortEntry 2 }
-- --------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> application 1.3.1.2
-- --------------------------------------------------------------------------------------
application OBJECT IDENTIFIER ::= { opModeSetting 2 }
-- --------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> application -> realCom 1.3.1.2.1
-- --------------------------------------------------------------------------------------
realcom OBJECT IDENTIFIER ::= { application 1 }
realComTable OBJECT-TYPE
SYNTAX SEQUENCE OF RealComEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial ports' operation mode table."
::= { realcom 1 }
realComEntry OBJECT-TYPE
SYNTAX RealComEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial port's operation mode entry."
INDEX { portIndex }
::= { realComTable 1 }
RealComEntry ::=
SEQUENCE {
realcomMaxConnection
INTEGER,
realcomIgnoreJammedIp
INTEGER,
realcomAllowDriverControl
INTEGER,
realcomConnectionDownRTS
INTEGER,
realcomConnectionDownDTR
INTEGER,
realcomTcpAliveChkTime
INTEGER
}
realcomMaxConnection OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the NPort S8000
series device server, and the Real COM driver on that
host will have full control over the port.
Max. connection = 1:
Allows only a single host<73><74>s Real COM driver to open
the specific NPort S8000 series device server<65><72>s
serial port.
Max connection = 2 to 8:
Allows 2 to 8 hosts<74><73> Real COM drivers to open the
specific NPort S8000 series device server<65><72>s serial
port, at the same time. When multiple hosts<74><73> Real
COM drivers open the serial port at the same time,
the COM driver only provides a pure data tunnel
without control ability. The serial port parameter
will use the firmware settings instead of getting
the settings from your application program (AP)."
::= { realComEntry 1 }
realcomIgnoreJammedIp OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been transmitted successfully
before transmitting the second group of data to all
hosts. Currently, if you select Yes for 'Ignore
jammed IP,' the host that is not responding will be
ignored, but the data will still be transmitted to
the other hosts."
::= { realComEntry 2 }
realcomAllowDriverControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If Max connection is greater than 1, NPort will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the NPort S8000 series device server may get
configuration changes from multiple hosts, the most
recent command received will take precedence."
::= { realComEntry 3 }
realcomConnectionDownRTS OBJECT-TYPE
SYNTAX INTEGER { always-low(1), always-high(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
NPort S8000 series device server. If this setting is
set to 'always low,' RTS will change its state to
low if the Ethernet link is off."
::= { realComEntry 4 }
realcomConnectionDownDTR OBJECT-TYPE
SYNTAX INTEGER { always-low(1), always-high(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
NPort S8000 series device server. If this setting is
set to 'goes low,' DTR will change its state to
low if the Ethernet link is off."
::= { realComEntry 5 }
realcomTcpAliveChkTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP alive check time."
::= { realComEntry 6 }
-- --------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> application -> RFC 2217 1.3.1.2.2
-- --------------------------------------------------------------------------------------
rfc2217 OBJECT IDENTIFIER ::= { application 2 }
rfc2217Table OBJECT-TYPE -- 1.3.1.2.2.1
SYNTAX SEQUENCE OF Rfc2217Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial ports' operation mode table."
::= { rfc2217 1 }
rfc2217Entry OBJECT-TYPE -- 1.3.1.2.2.1.1
SYNTAX Rfc2217Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial port's operation mode entry."
INDEX { portIndex }
::= { rfc2217Table 1 }
Rfc2217Entry ::=
SEQUENCE {
rfc2217TcpPort
INTEGER,
rfc2217TcpAliveChkTime
INTEGER
}
rfc2217TcpPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 'TCP port' is the TCP port that the NPort
S8000 series device server uses to listen to
connections, and that other devices must use to
contact the NPort S8000 series device server.
This setting is used in RFC2217 mode."
::= { rfc2217Entry 1 }
rfc2217TcpAliveChkTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP alive check time."
::= { rfc2217Entry 2 }
-- --------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> application -> TCP Server 1.3.1.2.3
-- --------------------------------------------------------------------------------------
tcpServer OBJECT IDENTIFIER ::= { application 3 }
tcpServerTable OBJECT-TYPE -- 1.3.1.2.3.1
SYNTAX SEQUENCE OF TcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial ports' operation mode table."
::= { tcpServer 1 }
tcpServerEntry OBJECT-TYPE -- 1.3.1.2.3.1.1
SYNTAX TcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial port's operation mode entry."
INDEX { portIndex }
::= { tcpServerTable 1 }
TcpServerEntry ::=
SEQUENCE {
tcpServerInactivityTime
INTEGER,
tcpServerMaxConnection
INTEGER,
tcpServerIgnoreJammedIp
INTEGER,
tcpServerAllowDriverControl
INTEGER,
tcpServerTcpServerConnectionDownRTS
INTEGER,
tcpServerTcpServerConnectionDownDTR
INTEGER,
tcpServerTcpPort
INTEGER,
tcpServerCmdPort
INTEGER,
tcpServerTcpAliveChkTime
INTEGER
}
tcpServerInactivityTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The NPort S8000 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. After
the connection is closed, the NPort S8000 series
device server starts listening for another
TCP connection."
::= { tcpServerEntry 1 }
tcpServerMaxConnection OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the NPort S8000
series device server, and the Real COM driver on that
host will have full control over the port.
Max. connection 1:
Allows only a single host<73><74>s Real COM driver to open
the specific NPort S8000 series device server<65><72>s
serial port.
Max connection 2 to 8:
Allows 2 to 8 hosts<74><73> Real COM drivers to open the
specific NPort S8000 series device server<65><72>s serial
port, at the same time. When multiple hosts<74><73> Real
COM drivers open the serial port at the same time,
the COM driver only provides a pure data tunnel
without control ability. The serial port parameter
will use the firmware settings instead of depending
on your application program (AP)."
::= { tcpServerEntry 2 }
tcpServerIgnoreJammedIp OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been transmitted successfully
before transmitting the second group of data to all
hosts. Currently, if you select Yes for 'Ignore
jammed IP,' the host that is not responding will be
ignored, but the data will still be transmitted to
the other hosts."
::= { tcpServerEntry 3 }
tcpServerAllowDriverControl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If Max connection is greater than 1, NPort will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the NPort S8000 series device server may get
configuration changes from multiple hosts, the most
recent command received will take precedence."
::= { tcpServerEntry 4 }
tcpServerTcpServerConnectionDownRTS OBJECT-TYPE
SYNTAX INTEGER { always-low(1), always-high(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For some applications, serial devices must obtain
the Ethernet link status from the RTS signal sent by the
NPort S8000 series device server. If this setting is
set to 'goes low,' RTS will change the state to
low if the Ethernet link is off."
::= { tcpServerEntry 5 }
tcpServerTcpServerConnectionDownDTR OBJECT-TYPE
SYNTAX INTEGER { always-low(1), always-high(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For some applications, serial devices must obtain
the Ethernet link status from the DTR signal sent by the
NPort S8000 series device server. If this setting is
set to 'goes low,' DTR will change the state to
low if the Ethernet link is off."
::= { tcpServerEntry 6 }
tcpServerTcpPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 'TCP port' is the TCP port that the NPort
S8000 series device server uses to listen to
connections, and that other devices must use to
contact the NPort S8000 series device server."
::= { tcpServerEntry 7 }
tcpServerCmdPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 'Command port' is a TCP port used to listen for
IP-Serial Lib commands from the host. In order to
prevent a TCP port conflict with other applications,
the user can set the Command port to another port
if needed. IP-Serial Lib will automatically check
the Command Port on the NPort S8000 series device
server to avoid the need for the user to configure
the program."
::= { tcpServerEntry 8 }
tcpServerTcpAliveChkTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP alive check time."
::= { tcpServerEntry 9 }
-- --------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> application -> TCP Client 1.3.1.2.4
-- --------------------------------------------------------------------------------------
tcpClient OBJECT IDENTIFIER ::= { application 4 }
tcpClientTable OBJECT-TYPE -- 1.3.1.2.4.1
SYNTAX SEQUENCE OF TcpClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial ports' operation mode table."
::= { tcpClient 1 }
tcpClientEntry OBJECT-TYPE -- 1.3.1.2.4.1.1
SYNTAX TcpClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial port's operation mode entry."
INDEX { portIndex }
::= { tcpClientTable 1 }
TcpClientEntry ::=
SEQUENCE {
tcpClientInactivityTime
INTEGER,
tcpClientIgnoreJammedIp
INTEGER,
tcpClientDestinationAddress1
DisplayString,
tcpClientDestinationPort1
INTEGER,
tcpClientDestinationAddress2
DisplayString,
tcpClientDestinationPort2
INTEGER,
tcpClientDestinationAddress3
DisplayString,
tcpClientDestinationPort3
INTEGER,
tcpClientDestinationAddress4
DisplayString,
tcpClientDestinationPort4
INTEGER,
tcpClientDesignatedLocalPort1
INTEGER,
tcpClientDesignatedLocalPort2
INTEGER,
tcpClientDesignatedLocalPort3
INTEGER,
tcpClientDesignatedLocalPort4
INTEGER,
tcpClientConnectionControl
INTEGER,
tcpClientTcpAliveChkTime
INTEGER
}
tcpClientInactivityTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The NPort S8000 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. After
the connection is closed, the NPort S8000 series
device server starts listening for another
TCP connection."
::= { tcpClientEntry 1 }
tcpClientIgnoreJammedIp OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been transmitted successfully
before transmitting the second group of data to all
hosts. Currently, if you select Yes for 'Ignore
jammed IP,' the host that is not responding will be
ignored, but the data will still be transmitted to
the other hosts."
::= { tcpClientEntry 2 }
tcpClientDestinationAddress1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can connect actively
to a remote host that has this IP address."
::= { tcpClientEntry 3 }
tcpClientDestinationPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can connect actively
to a remote host that has this TCP port number."
::= { tcpClientEntry 4 }
tcpClientDestinationAddress2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can
connect actively to a remote host that has this IP
address."
::= { tcpClientEntry 5 }
tcpClientDestinationPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can
connect actively to a remote host that
has this TCP port number."
::= { tcpClientEntry 6 }
tcpClientDestinationAddress3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can
connect actively to a remote host that
has this IP address."
::= { tcpClientEntry 7 }
tcpClientDestinationPort3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can
connect actively to a remote host that
has this port number."
::= { tcpClientEntry 8 }
tcpClientDestinationAddress4 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can
connect actively to a remote host that
has this IP address."
::= { tcpClientEntry 9 }
tcpClientDestinationPort4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can
connect actively to a remote host that
has this port number."
::= { tcpClientEntry 10 }
tcpClientDesignatedLocalPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local TCP port used to connect actively to the
remote host."
::= { tcpClientEntry 11 }
tcpClientDesignatedLocalPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local TCP port used to connect actively to the
remote host."
::= { tcpClientEntry 12 }
tcpClientDesignatedLocalPort3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local TCP port used to connect actively to the
remote host."
::= { tcpClientEntry 13 }
tcpClientDesignatedLocalPort4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local TCP port used to connect actively to the
remote host."
::= { tcpClientEntry 14 }
tcpClientConnectionControl OBJECT-TYPE
SYNTAX INTEGER {
startup-None(257),
anyCharacter-None(258),
anyCharacter-InactivityTime(514),
dsrOn-DSR-Off(1028),
dsrOn-None(260),
dcdOn-DCD-Off(2056),
dcdOn-None(264)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Events that cause the TCP client to drop the
connection."
::= { tcpClientEntry 15 }
tcpClientTcpAliveChkTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP alive check time."
::= { tcpClientEntry 16 }
-- --------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> application -> UDP 1.3.1.2.5
-- --------------------------------------------------------------------------------------
udp OBJECT IDENTIFIER ::= { application 5 }
udpTable OBJECT-TYPE -- 1.3.1.2.5.1
SYNTAX SEQUENCE OF UdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial ports' operation mode table."
::= { udp 1 }
udpEntry OBJECT-TYPE -- 1.3.1.2.5.1.1
SYNTAX UdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The serial port's operation mode entry."
INDEX { portIndex }
::= { udpTable 1 }
UdpEntry ::=
SEQUENCE {
udpDestinationAddress1Begin
IpAddress,
udpDestinationAddress1End
IpAddress,
udpDestinationPort1
INTEGER,
udpDestinationAddress2Begin
IpAddress,
udpDestinationAddress2End
IpAddress,
udpDestinationPort2
INTEGER,
udpDestinationAddress3Begin
IpAddress,
udpDestinationAddress3End
IpAddress,
udpDestinationPort3
INTEGER,
udpDestinationAddress4Begin
IpAddress,
udpDestinationAddress4End
IpAddress,
udpDestinationPort4
INTEGER,
udpLocalListenPort
INTEGER
}
udpDestinationAddress1Begin OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
udpDestinationAddress1End."
::= { udpEntry 1 }
udpDestinationAddress1End OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
udpDestinationAddress1Begin and this parameter."
::= { udpEntry 2 }
udpDestinationPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts that have this port
number."
::= { udpEntry 3 }
udpDestinationAddress2Begin OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
udpDestinationAddress2End."
::= { udpEntry 4 }
udpDestinationAddress2End OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to the remote hosts whose IP
addresses are in the range between
udpDestinationAddress2Begin and this parameter."
::= { udpEntry 5 }
udpDestinationPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to the remote hosts that have this
TCP port number."
::= { udpEntry 6 }
udpDestinationAddress3Begin OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
udpDestinationAddress3End."
::= { udpEntry 7 }
udpDestinationAddress3End OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
udpDestinationAddress3Begin and this parameter."
::= { udpEntry 8 }
udpDestinationPort3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts that have this TCP port number."
::= { udpEntry 9 }
udpDestinationAddress4Begin OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
udpDestinationAddress4End."
::= { udpEntry 10 }
udpDestinationAddress4End OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
udpDestinationAddress4Begin and this parameter."
::= { udpEntry 11 }
udpDestinationPort4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NPort S8000 series device server can actively send
UDP packets to remote hosts that have this
TCP port number."
::= { udpEntry 12 }
udpLocalListenPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port that the NPort S8000 series device
server listens to and that other devices must use
to contact the NPort S8000 series device server."
::= { udpEntry 13 }
-- --------------------------------------------------------------------------------------
-- Serial settings -> Operation Modes settings -> Data Packing 1.3.1.3
-- --------------------------------------------------------------------------------------
dataPacking OBJECT IDENTIFIER ::= { opModeSetting 3 }
dataPackingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataPackingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Data Packing table."
::= { dataPacking 1 }
dataPackingPortEntry OBJECT-TYPE
SYNTAX DataPackingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Data Packing entry."
INDEX { portIndex }
::= { dataPackingPortTable 1 }
DataPackingPortEntry ::=
SEQUENCE {
portPacketLength
INTEGER,
portDelimiter1Enable
INTEGER,
portDelimiter1
DisplayString,
portDelimiter2Enable
INTEGER,
portDelimiter2
DisplayString,
portDelimiterProcess
INTEGER,
portForceTransmit
INTEGER
}
portPacketLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the value is 0, the Delimiter Process will be
used, regardless of the length of the data
packet. If the data length (in bytes) matches the
configured value, the data will be forced out. The
data length can be configured from 0 to 1024 bytes.
Set to 0 if you do not need to limit the length."
::= { dataPackingPortEntry 1 }
portDelimiter1Enable OBJECT-TYPE
SYNTAX INTEGER {disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the first delimiter character."
::= { dataPackingPortEntry 2 }
portDelimiter1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first delimiter character, in hex decimal."
::= { dataPackingPortEntry 3 }
portDelimiter2Enable OBJECT-TYPE
SYNTAX INTEGER {disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the second delimiter character."
::= { dataPackingPortEntry 4 }
portDelimiter2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second delimiter character, in hex decimal."
::= { dataPackingPortEntry 5 }
portDelimiterProcess OBJECT-TYPE
SYNTAX INTEGER {
doNothing(1),
delimiterAddOne(2),
delimiterAddTwo(4),
stripDelimiter(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"'delimiterAddOne' or 'delimiterAddTwo': The data
will be transmitted when an additional byte (for
'delimiterAddOne'), or an additional 2 bytes (for
'delimiterAddTwo') of data is received after
receiving the Delimiter.
'stripDelimiter': When the delimiter is received,
the Delimiter is deleted (i.e., stripped), and the
remaining data is transmitted.
'doNothing': The data will be transmitted when the
delimiter is received."
::= { dataPackingPortEntry 6 }
portForceTransmit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: Disable the force transmit timeout.
1 to 65535: Forces the NPort S8000 series device
server's TCP/IP protocol software to try to pack
serial data received during the specified time into
the same data frame."
::= { dataPackingPortEntry 7 }
opModeSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit opMode setting for all of serial ports."
::= { opModeSetting 4 }
-- -------------------------------------------------------------
-- Serial settings -> Communication Parameters settings 1.3.2
-- -------------------------------------------------------------
comParamSetting OBJECT IDENTIFIER ::= { portSetting 2 }
comParamPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ComParamPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Communication Parameters table."
::= { comParamSetting 1 }
comParamPortEntry OBJECT-TYPE
SYNTAX ComParamPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Communication Parameters entry."
INDEX { portIndex }
::= { comParamPortTable 1 }
ComParamPortEntry ::=
SEQUENCE {
portAlias
DisplayString,
portBaudRateManual
INTEGER,
portDataBits
INTEGER,
portStopBits
INTEGER,
portParity
INTEGER,
portFlowControl
INTEGER,
portFIFO
INTEGER,
portInterface
INTEGER,
portBaudRate
INTEGER
}
portAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port alias is included to allow easy identification of
the serial devices that are connected to NPort S8000
series device server's serial port."
::= { comParamPortEntry 1 }
portBaudRate OBJECT-TYPE
SYNTAX INTEGER {
b50(0),
b75(1),
b110(2),
b134(3),
b150(4),
b300(5),
b600(6),
b1200(7),
b1800(8),
b2400(9),
b4800(10),
b7200(11),
b9600(12),
b19200(13),
b38400(14),
b57600(15),
b115200(16),
b230400(17),
b460800(18),
b921600(19)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's speed in bits per second. You can choose
a standard baud rate by indexing."
::= { comParamPortEntry 2 }
portDataBits OBJECT-TYPE
SYNTAX INTEGER {
bits-5(0),
bits-6(1),
bits-7(2),
bits-8(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of bits in a character for the port."
::= { comParamPortEntry 3 }
portStopBits OBJECT-TYPE
SYNTAX INTEGER {
bits-1(0),
bits-1dot5(1),
bits-2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of stop bits for the port."
::= { comParamPortEntry 4 }
portParity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
odd(1),
even(2),
mark(3),
space(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The parity bit for the port."
::= { comParamPortEntry 5 }
portFlowControl OBJECT-TYPE
SYNTAX INTEGER {
none(0),
rts-cts(1),
xon-xoff(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow-control method for the port."
::= { comParamPortEntry 6 }
portFIFO OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the port's FIFO."
::= { comParamPortEntry 7 }
portInterface OBJECT-TYPE
SYNTAX INTEGER {
rs-232(0),
rs-422(1),
rs-485-2-wire(2),
rs-485-4-wire(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The serial interface that the port works on."
::= { comParamPortEntry 8 }
portBaudRateManual OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's speed in bits per second. You can
specify a baud rate manually."
::= { comParamPortEntry 9 }
comParamSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit communication parameters setting for all of serial ports."
::= { comParamSetting 2 }
-- -------------------------------------------------------------
-- Serial settings -> Serial Tos settings 1.3.3
-- -------------------------------------------------------------
serialTosSetting OBJECT IDENTIFIER ::= { portSetting 3 }
serialTosTable OBJECT-TYPE
SYNTAX SEQUENCE OF SerialTosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Communication Parameters table."
::= { serialTosSetting 1 }
serialTosEntry OBJECT-TYPE
SYNTAX SerialTosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Communication Parameters entry."
INDEX { portIndex }
::= { serialTosTable 1 }
SerialTosEntry ::=
SEQUENCE {
serialTosEnable
INTEGER,
serialTosValue
INTEGER
}
serialTosEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The serial port TOS is enable or not."
::= { serialTosEntry 1 }
serialTosValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The serial port TOS value, the last 2 bits not be used."
::= { serialTosEntry 2 }
serialTosSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit serial Tos setting for all of serial ports."
::= { serialTosSetting 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Settings 1.4
-- -----------------------------------------------------------------------------------------------------
ethernetSetting OBJECT IDENTIFIER ::= { swMgmt 4 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Settings -> Port Setting 1.4.1
-- -----------------------------------------------------------------------------------------------------
portSettings OBJECT IDENTIFIER ::= { ethernetSetting 1 }
portTable OBJECT-TYPE -- 1.4.1.1
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table."
::= { portSettings 1 }
portEntry OBJECT-TYPE -- 1.4.1.1.1
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port entry."
INDEX { portIndex-Eth }
::= { portTable 1 }
PortEntry ::=
SEQUENCE {
portIndex-Eth
INTEGER,
portEnable
INTEGER,
portDesc
DisplayString,
portName
DisplayString,
portSpeed
INTEGER,
portFDXFlowCtrl
INTEGER,
portMDI
INTEGER
}
portIndex-Eth OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portEntry 1 }
portEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the port."
::= { portEntry 2 }
portDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description"
::= { portEntry 3 }
portName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port Name"
::= { portEntry 4 }
portSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
speed100M-Full(1),
speed100M-Half(2),
speed10M-Full(3),
speed10M-Half(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port speed and duplex."
::= { portEntry 5 }
portFDXFlowCtrl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port FDX Flow Control"
::= { portEntry 6 }
portMDI OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
auto(1),
mdi(2),
mdiX(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port MDI/MDIX."
::= { portEntry 7 }
portSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit all of ethernet port setting."
::= { portSettings 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Settings -> Port Trunk 1.4.2
-- -----------------------------------------------------------------------------------------------------
portTrunking OBJECT IDENTIFIER ::= { ethernetSetting 2 }
-- trunk setting table
trunkSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Setting Table."
::= { portTrunking 1 }
trunkSettingEntry OBJECT-TYPE
SYNTAX TrunkSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Setting Entry."
INDEX { trunkSettingIndex }
::= { trunkSettingTable 1 }
TrunkSettingEntry ::=
SEQUENCE {
trunkSettingIndex
INTEGER,
trunkType
INTEGER,
trunkMemberPorts
PortList
}
trunkSettingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Index."
::= { trunkSettingEntry 1 }
trunkType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunking Group Type."
::= { trunkSettingEntry 2 }
trunkMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunking Group Member Ports."
::= { trunkSettingEntry 3 }
portTrunkingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit port trunkning setting."
::= { portTrunking 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Settings -> Communication Redundancy 1.4.3
-- -----------------------------------------------------------------------------------------------------
commRedundancy OBJECT IDENTIFIER ::= { ethernetSetting 3 }
protocolOfRedundancySetup OBJECT-TYPE
SYNTAX INTEGER { none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This set the redundancy protocol of this server. "
::= { commRedundancy 1 }
spanningTree OBJECT IDENTIFIER ::= { commRedundancy 2 }
spanningTreeBridgePriority OBJECT-TYPE
SYNTAX INTEGER {priority-----0(0), priority--4096(4096), priority--8192(8192), priority-12288(12288),
priority-16384(16384), priority-20480(20480), priority-24576(24576),
priority-28672(28672), priority-32768(32768), priority-36864(36864),
priority-40960(40960), priority-45056(45056), priority-49152(49152),
priority-53248(53248), priority-57344(57344), priority-61440(61440)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bridge priority of spanning tree protocol."
::= { spanningTree 1 }
spanningTreeHelloTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hello time of spanning tree protocol."
::= { spanningTree 2 }
spanningTreeMaxAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max. age of spanning tree protocol."
::= { spanningTree 3 }
spanningTreeForwardingDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tje forwarding delay of spanning tree protocol."
::= { spanningTree 4 }
spanningTreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpanningTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree table."
::= { spanningTree 5 }
spanningTreeEntry OBJECT-TYPE
SYNTAX SpanningTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree port entry."
INDEX { spanningTreeIndex }
::= { spanningTreeTable 1 }
SpanningTreeEntry ::=
SEQUENCE {
spanningTreeIndex
INTEGER,
enableSpanningTree
INTEGER,
spanningTreePortPriority
INTEGER,
spanningTreePortCost
INTEGER
}
spanningTreeIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of spanning tree table."
::= { spanningTreeEntry 1 }
enableSpanningTree OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable of spanning tree protocol for this port."
::= { spanningTreeEntry 2 }
spanningTreePortPriority OBJECT-TYPE
SYNTAX INTEGER {priority---0(0), priority--16(16), priority--32(32), priority--48(48),
priority--64(64), priority--80(80), priority--96(96), priority-112(112),
priority-128(128), priority-144(144), priority-160(160), priority-176(176),
priority-192(192), priority-208(208), priority-224(224), priority-240(240)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port priority of spanning tree protocol."
::= { spanningTreeEntry 3 }
spanningTreePortCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port cost of spanning tree protocol."
::= { spanningTreeEntry 4 }
turboRing OBJECT IDENTIFIER ::= { commRedundancy 3 }
turboRingMasterSetup OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRing 1 }
turboRingRdntPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the TURBO RING."
::= { turboRing 2 }
turboRingRdntPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the TURBO RING."
::= { turboRing 3 }
turboRingEnableCoupling OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the ring coupling function."
::= { turboRing 4 }
turboRingCouplingPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The coupling port of ring coupling function."
::= { turboRing 5 }
turboRingControlPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control port of ring coupling function."
::= { turboRing 6 }
turboRingV2 OBJECT IDENTIFIER ::= { commRedundancy 4}
turboRingV2Ring1 OBJECT IDENTIFIER ::= { turboRingV2 1 }
ringIndexRing1 OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The turboRingV2 Ring Index."
::= { turboRingV2Ring1 1 }
ringEnableRing1 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The turboRingV2 Ring1 Enalbe Config."
::= { turboRingV2Ring1 2 }
masterSetupRing1 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRingV2Ring1 3 }
rdnt1stPortRing1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 4 }
rdnt2ndPortRing1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 5 }
turboRingV2Ring2 OBJECT IDENTIFIER ::= { turboRingV2 2 }
ringIndexRing2 OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The turboRingV2 Ring Index."
::= { turboRingV2Ring2 1 }
ringEnableRing2 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The turboRingV2 Ring2 Enalbe Config."
::= { turboRingV2Ring2 2 }
masterSetupRing2 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRingV2Ring2 3 }
rdnt1stPortRing2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 4 }
rdnt2ndPortRing2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 5 }
turboRingV2Coupling OBJECT IDENTIFIER ::= { turboRingV2 3 }
couplingEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the ring coupling enable."
::= { turboRingV2Coupling 1 }
couplingMode OBJECT-TYPE
SYNTAX INTEGER { dualHoming(1), couplingBackup(2), couplingPrimary(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the ring coupling mode."
::= { turboRingV2Coupling 2 }
coupling1stPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'"
::= { turboRingV2Coupling 3 }
coupling2ndPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used."
::= { turboRingV2Coupling 4 }
commRedundancyActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit communication redundancy setting."
::= { commRedundancy 5 }
turboChain OBJECT IDENTIFIER ::= { commRedundancy 6 }
turboChainRole OBJECT-TYPE
SYNTAX INTEGER { head(1), member(2), tail(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The device's role in Turbo Chain."
::= { turboChain 1 }
turboChainPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the device's role is Head, this variable assigns the Head Port.
If the device's role is Member, this variable assigns the first Member Port.
If the device's role is Tail, this variable assign the Tail Port."
::= { turboChain 2 }
turboChainPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the device's role is Head, this variable assigns the Member Port.
If the device's role is Member, this variable assigns the second Member Port.
If the device's role is Tail, this variable assign the Member Port."
::= { turboChain 3 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Settings -> Bandwidth Management 1.4.4
-- -----------------------------------------------------------------------------------------------------
rateLimiting OBJECT IDENTIFIER ::= { ethernetSetting 4 }
rateLimitingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rate limiting table."
::= { rateLimiting 1 }
rateLimitingEntry OBJECT-TYPE
SYNTAX RateLimitingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rate limiting Entry."
INDEX { portIndex-Eth }
::= { rateLimitingTable 1 }
RateLimitingEntry ::=
SEQUENCE {
limitMode
INTEGER,
lowPriLimitRate
INTEGER,
normalPriLimitRate
INTEGER,
mediumPriLimitRate
INTEGER,
highPriLimitRate
INTEGER
}
limitMode OBJECT-TYPE
SYNTAX INTEGER {all(0),bmucast(1),bmcast(2),bcast(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limit mode."
::= { rateLimitingEntry 1 }
lowPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {not-limit(0),limit-128k(1),limit-256k(2),limit-512k(3),
limit-1M(4),limit-2M(5),limit-4M(6),limit-8M(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of low priority queue."
::= { rateLimitingEntry 2 }
normalPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {not-limit(0),limit-128k(1),limit-256k(2),limit-512k(3),
limit-1M(4),limit-2M(5),limit-4M(6),limit-8M(7),
limit-16M(8)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of normal priority queue.
The values being equal to or double value of lowPriLimitRate are valid for set."
::= { rateLimitingEntry 3 }
mediumPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {not-limit(0),limit-128k(1),limit-256k(2),limit-512k(3),
limit-1M(4),limit-2M(5),limit-4M(6),limit-8M(7),
limit-16M(8),limit-32M(9)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of medium priority queue.
The values being equal to or double value of normalPriLimitRate are valid for set."
::= { rateLimitingEntry 4 }
highPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {not-limit(0),limit-128k(1),limit-256k(2),limit-512k(3),
limit-1M(4),limit-2M(5),limit-4M(6),limit-8M(7),
limit-16M(8),limit-32M(9),limit-64M(10)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of high priority queue.
The values being equal to or double value of mediumPriLimitRate are valid for set."
::= { rateLimitingEntry 5 }
rateLimitActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit rate limit setting."
::= { rateLimiting 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Settings -> Line Swap Fast Recovery 1.4.5
-- -----------------------------------------------------------------------------------------------------
lineSwapFastRecovery OBJECT IDENTIFIER ::= { ethernetSetting 5 }
lineSwapRecovery OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable line-swap-fast-recovery function."
::= { lineSwapFastRecovery 1 }
lineSwapActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit line swap fast recovery setting."
::= { lineSwapFastRecovery 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings 1.5
-- -----------------------------------------------------------------------------------------------------
ethernetAdvSetting OBJECT IDENTIFIER ::= { swMgmt 5 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Traffic Prioritization 1.5.1
-- -----------------------------------------------------------------------------------------------------
trafficPrioritization OBJECT IDENTIFIER ::= { ethernetAdvSetting 1 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Traffic Prioritization -> QoS Classification 1.5.1.1
-- -----------------------------------------------------------------------------------------------------
qosClassification OBJECT IDENTIFIER ::= { trafficPrioritization 1 }
queuingMechanism OBJECT-TYPE
SYNTAX INTEGER {sched-weight-fair(0),sched-strict(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queuing mechanism."
::= { qosClassification 1 }
qosPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The QOS port table."
::= { qosClassification 2 }
qosPortEntry OBJECT-TYPE
SYNTAX QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The QOS Port Entry."
INDEX { portIndex-Eth }
::= { qosPortTable 1 }
QosPortEntry ::=
SEQUENCE {
inspectTos
INTEGER,
inspectCos
INTEGER,
portPriority
INTEGER
}
inspectTos OBJECT-TYPE
SYNTAX INTEGER {no (0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the inspection of TOS field."
::= { qosPortEntry 1 }
inspectCos OBJECT-TYPE
SYNTAX INTEGER {no (0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the inspection of COS field."
::= { qosPortEntry 2 }
portPriority OBJECT-TYPE
SYNTAX INTEGER {priority-0(0), priority-1(1), priority-2(2), priority-3(3),
priority-4(4), priority-5(5), priority-6(6), priority-7(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The deault priority of the port."
::= { qosPortEntry 3 }
qosClassificationActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit Qos classification setting."
::= { qosClassification 3 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Traffic Prioritization -> Cos Mapping 1.5.1.2
-- -----------------------------------------------------------------------------------------------------
cosMapping OBJECT IDENTIFIER ::= { trafficPrioritization 2 }
cosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The COS mapping table."
::= { cosMapping 1 }
cosMappingEntry OBJECT-TYPE
SYNTAX CosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The COS mapping Entry."
INDEX { cosTag}
::= { cosMappingTable 1 }
CosMappingEntry ::=
SEQUENCE {
cosTag
INTEGER,
cosMappedPriority
INTEGER
}
cosTag OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cos tag of TOS field."
::= { cosMappingEntry 1 }
cosMappedPriority OBJECT-TYPE
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame's priority corresponding to it's COS tag value."
::= { cosMappingEntry 2 }
cosMappingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit Cos mapping setting."
::= { cosMapping 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Traffic Prioritization -> Tos/DiffServ Mapping 1.5.1.3
-- -----------------------------------------------------------------------------------------------------
tosMapping OBJECT IDENTIFIER ::= { trafficPrioritization 3 }
tosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF TosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TOS mapping table."
::= { tosMapping 1 }
tosMappingEntry OBJECT-TYPE
SYNTAX TosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TOS mapping Entry."
INDEX { tosClass }
::= { tosMappingTable 1 }
TosMappingEntry ::=
SEQUENCE {
tosClass
INTEGER,
tosMappedPriority
INTEGER
}
tosClass OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TOS class of TOS field."
::= { tosMappingEntry 1 }
tosMappedPriority OBJECT-TYPE
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame's priority corresponding to it's TOS class value."
::= { tosMappingEntry 2 }
tosMappingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit TOS mapping setting."
::= { tosMapping 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Virtual LAN 1.5.2
-- -----------------------------------------------------------------------------------------------------
vlan OBJECT IDENTIFIER ::= { ethernetAdvSetting 2 }
vlanType OBJECT-TYPE
SYNTAX INTEGER {tagBased(0),portBased(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Type."
::= { vlan 1 }
managementVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management VLAN id."
::= { vlan 2 }
vlanPortSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan seting table of ports."
::= { vlan 3 }
vlanPortSettingEntry OBJECT-TYPE
SYNTAX VlanPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Setting Entry of VLAN."
INDEX { portIndex-Eth }
::= { vlanPortSettingTable 1 }
VlanPortSettingEntry ::=
SEQUENCE {
portVlanType
INTEGER,
portDefaultVid
INTEGER,
portFixedVid
DisplayString,
portForbiddenVid
DisplayString
}
portVlanType OBJECT-TYPE
SYNTAX INTEGER {access(0),trunk(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan type of port."
::= { vlanPortSettingEntry 1 }
portDefaultVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVID of port."
::= { vlanPortSettingEntry 2 }
portFixedVid OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..320))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed vids of (trunk) port."
::= { vlanPortSettingEntry 3 }
portForbiddenVid OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..320))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The forbidden vids of (trunk)port."
::= { vlanPortSettingEntry 4 }
portbaseVlanSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortbaseVlanSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port base Vlan Setting Table."
::= { vlan 4 }
portbaseVlanSettingEntry OBJECT-TYPE
SYNTAX PortbaseVlanSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port base Vlan Setting Entry."
INDEX { portbaseVlanSettingIndex }
::= { portbaseVlanSettingTable 1 }
PortbaseVlanSettingEntry ::=
SEQUENCE {
portbaseVlanSettingIndex
INTEGER,
portbaseVlanMemberPorts
PortList
}
portbaseVlanSettingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port base Vlan Group Index."
::= { portbaseVlanSettingEntry 1 }
portbaseVlanMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port base Vlan Group Member Ports."
::= { portbaseVlanSettingEntry 2 }
vlanActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit VLAN setting."
::= { vlan 5 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Multicast Filtering 1.5.3
-- -----------------------------------------------------------------------------------------------------
multicastFiltering OBJECT IDENTIFIER ::= { ethernetAdvSetting 3 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Multicast Filtering -> IGMP Snooping Setting 1.5.3.1
-- -----------------------------------------------------------------------------------------------------
igmpSnooping OBJECT IDENTIFIER ::= { multicastFiltering 1 }
enableGlobalIgmpSnooping OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the IGMP snooping functon ."
::= { igmpSnooping 1 }
querierQueryInterval OBJECT-TYPE
SYNTAX INTEGER (20..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This query interval of the querier function for this VLAN."
::= { igmpSnooping 2 }
igmpSnoopingSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopingSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP snooping setting table."
::= { igmpSnooping 3 }
igmpSnoopingSettingEntry OBJECT-TYPE
SYNTAX IgmpSnoopingSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP snooping setting Entry."
INDEX { vlanId }
::= { igmpSnoopingSettingTable 1 }
IgmpSnoopingSettingEntry ::=
SEQUENCE {
enableIgmpSnooping
INTEGER,
enableQuerier
INTEGER,
fixedMulticastQuerierPorts
PortList
}
enableIgmpSnooping OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the IGMP snooping functon in this VLAN."
::= { igmpSnoopingSettingEntry 1 }
enableQuerier OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the querier function for this VLAN."
::= { igmpSnoopingSettingEntry 2 }
fixedMulticastQuerierPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports that multicast-Querier exist."
::= { igmpSnoopingSettingEntry 3 }
igmpSnoopingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit GIMP snoopong setting."
::= { igmpSnooping 4 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Multicast Filtering -> Static Multicast MAC 1.5.3.2
-- -----------------------------------------------------------------------------------------------------
staticMulticast OBJECT IDENTIFIER ::= { multicastFiltering 2 }
staticMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The static multicast table."
::= { staticMulticast 1 }
staticMulticastEntry OBJECT-TYPE
SYNTAX StaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static multicast Entry."
INDEX { staticMulticastIndex }
::= { staticMulticastTable 1 }
StaticMulticastEntry ::=
SEQUENCE {
staticMulticastIndex
INTEGER,
staticMulticastAddress
MacAddress,
staticMulticastPorts
PortList,
staticMulticastStatus
INTEGER
}
staticMulticastIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The static multicast index."
::= { staticMulticastEntry 1 }
staticMulticastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static multicast address."
::= { staticMulticastEntry 2 }
staticMulticastPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port map of the static multicast address."
::= { staticMulticastEntry 3 }
staticMulticastStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then actvie.
Use destroy to delete this row."
::= { staticMulticastEntry 4 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Multicast Filtering -> GMRP 1.5.3.3
-- -----------------------------------------------------------------------------------------------------
gmrp OBJECT IDENTIFIER ::= { multicastFiltering 3 }
-- gmrp setting table
gmrpSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF GmrpSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP setting table."
::= { gmrp 1 }
gmrpSettingEntry OBJECT-TYPE
SYNTAX GmrpSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP Setting Entry."
INDEX { portIndex-Eth }
::= { gmrpSettingTable 1 }
GmrpSettingEntry ::=
SEQUENCE {
enableGMRP
INTEGER
}
enableGMRP OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable GMRP."
::= { gmrpSettingEntry 1 }
gmrpActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit GMRP setting."
::= { gmrp 2 }
-- -----------------------------------------------------------------------------------------------------
-- Ethernet Advanced Settings -> Set Device IP 1.5.4
-- -----------------------------------------------------------------------------------------------------
setDeviceIp OBJECT IDENTIFIER ::= { ethernetAdvSetting 4 }
setDevIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SetDevIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set devvice IP table."
::= { setDeviceIp 1 }
setDevIpEntry OBJECT-TYPE
SYNTAX SetDevIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set devvice IP table entry."
INDEX { setDevIpIndex }
::= { setDevIpTable 1 }
SetDevIpEntry ::=
SEQUENCE {
setDevIpIndex
INTEGER,
setDevIpCurrentIpofDevice
DisplayString,
setDevIpPresentBy
INTEGER,
setDevIpDedicatedIp
IpAddress
}
setDevIpIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set devvice IP index."
::= { setDevIpEntry 1 }
setDevIpCurrentIpofDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP address of connected to this port."
::= { setDevIpEntry 2 }
setDevIpPresentBy OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
dhcpClient(1),
rarp(2),
bootp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used that assigning IP to the device."
::= { setDevIpEntry 3 }
setDevIpDedicatedIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address when assign to the device connected to this port."
::= { setDevIpEntry 4 }
setDeviceIpActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit automatic set device IP by DHCP/Bootp/RARP and DHCP relay agent setting."
::= { setDeviceIp 2 }
dhcpServer1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address1 of the relay agent."
::= { setDeviceIp 3 }
dhcpServer2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address2 of the relay agent."
::= { setDeviceIp 4 }
dhcpServer3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address3 of the relay agent."
::= { setDeviceIp 5 }
dhcpServer4 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address4 of the relay agent."
::= { setDeviceIp 6 }
DHCPOption82 OBJECT IDENTIFIER ::= { setDeviceIp 7 }
enableOption82 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Option 82 information contains 2 sub-options: Circuit ID and Remote ID, which define the relationship between end device IP and the DHCP Option 82 server."
::= { DHCPOption82 1 }
option82Type OBJECT-TYPE
SYNTAX INTEGER { IP(0), MAC(1), Circuit-ID(2), other(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of DHCP option 82."
::= { DHCPOption82 2 }
option82Value OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of DHCP option 82."
::= { DHCPOption82 3 }
option82Display OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The display of DHCP option 82."
::= { DHCPOption82 4 }
dhcpFunctionTable OBJECT-TYPE
SYNTAX SEQUENCE OF dhcpFunctionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Function Table."
::= { DHCPOption82 5 }
dhcpFunctionEntry OBJECT-TYPE
SYNTAX dhcpFunctionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DHCP Function Table entry."
INDEX { dhcpPortIndex }
::= { dhcpFunctionTable 1 }
dhcpPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP Function Table index."
::= { dhcpFunctionEntry 1 }
dhcpPortCirduitID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP Function Table Cirduit-ID."
::= { dhcpFunctionEntry 2 }
dhcpPortO82enable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port enable of DHCP Function Table."
::= { dhcpFunctionEntry 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Management 1.6
-- -----------------------------------------------------------------------------------------------------
systemManagement OBJECT IDENTIFIER ::= { swMgmt 6 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Misc. Network Settings 1.6.1
-- -----------------------------------------------------------------------------------------------------
miscNetwork OBJECT IDENTIFIER ::= { systemManagement 1 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Misc. Network Settings -> Accessible IP List 1.6.1.1
-- -----------------------------------------------------------------------------------------------------
accessibleIP OBJECT IDENTIFIER ::= { miscNetwork 1 }
enableAccessibleIP OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the accessible IP address list."
::= { accessibleIP 1 }
accessibleIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessibleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"accessibleIP."
::= { accessibleIP 2 }
accessibleIpEntry OBJECT-TYPE
SYNTAX AccessibleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Accessible IP address entry."
INDEX { accessibleIpIndex }
::= { accessibleIpTable 1 }
AccessibleIpEntry ::=
SEQUENCE {
accessibleIpIndex
INTEGER,
accessibleIpAddress
IpAddress,
accessibleIpNetMask
IpAddress
}
accessibleIpIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accessible IP list index."
::= { accessibleIpEntry 1 }
accessibleIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Accessible IP address"
::= { accessibleIpEntry 2 }
accessibleIpNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Accessible IP netmask."
::= { accessibleIpEntry 3 }
accessibleIPActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit accessible IP list setting."
::= { accessibleIP 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Misc. Network Settings -> syslog server 1.6.1.2
-- -----------------------------------------------------------------------------------------------------
syslogSetting OBJECT IDENTIFIER ::= { miscNetwork 2 }
syslogServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 1"
::= { syslogSetting 1 }
syslogServer1port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 1 port"
::= { syslogSetting 2 }
syslogServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 2"
::= { syslogSetting 3 }
syslogServer2port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 2 port"
::= { syslogSetting 4 }
syslogServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 3"
::= { syslogSetting 5 }
syslogServer3port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 3 port"
::= { syslogSetting 6 }
syslogSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit syslog server setting."
::= { syslogSetting 7 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Misc. Network Settings -> Local User Database 1.6.1.3
-- -----------------------------------------------------------------------------------------------------
-- localUserDB OBJECT IDENTIFIER ::= { miscNetwork 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Port Access Control 1.6.2
-- -----------------------------------------------------------------------------------------------------
portAccessControl OBJECT IDENTIFIER ::= { systemManagement 2 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Port Access Control -> static port lock 1.6.2.1
-- -----------------------------------------------------------------------------------------------------
staticPortLock OBJECT IDENTIFIER ::= { portAccessControl 1 }
staticPortLockAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static port lock address."
::= { staticPortLock 1 }
staticPortLockPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port of the static port lock address."
::= { staticPortLock 2 }
staticPortLockStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET."
::= { staticPortLock 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Port Access Control -> dot1x 1.6.2.2
-- -----------------------------------------------------------------------------------------------------
dot1x OBJECT IDENTIFIER ::= { portAccessControl 2 }
-- ieee 802.1x global settings
dataBaseOption OBJECT-TYPE
SYNTAX INTEGER {
local(1),
radius(2),
radius-local(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IEEE 802.1X database option."
::= { dot1x 1 }
radiusServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { dot1x 2 }
radiusPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Port."
::= { dot1x 3 }
radiusSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { dot1x 4 }
dot1xReauthEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1X Re-authentication."
::= { dot1x 5 }
dot1xReauthPeriod OBJECT-TYPE
SYNTAX INTEGER (60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IEEE 802.1X Re-authentication Period."
::= { dot1x 6 }
-- ieee 802.1X port setting table
dot1xSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Port Setting Table."
::= { dot1x 7 }
dot1xSettingEntry OBJECT-TYPE
SYNTAX Dot1xSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Port Setting Entry."
INDEX { portIndex-Eth }
::= { dot1xSettingTable 1 }
Dot1xSettingEntry ::=
SEQUENCE {
enableDot1X
INTEGER
}
enableDot1X OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1X."
::= { dot1xSettingEntry 1 }
dot1xActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit 802.1X setting."
::= { dot1x 8 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Auto Warning Settings 1.6.3
-- -----------------------------------------------------------------------------------------------------
autoWarming OBJECT IDENTIFIER ::= { systemManagement 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Auto Warning Settings -> E-mail Alert 1.6.3.1
-- -----------------------------------------------------------------------------------------------------
emailAlert OBJECT IDENTIFIER ::= { autoWarming 1 }
emailWarningMailServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The email server's Ip Address/Domain name of email warning function."
::= { emailAlert 1 }
emailWarningFromEmail OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The e-mail address to be filled in the 'From' field of the auto-warning e-mail."
::= { emailAlert 2 }
emailWarningFirstEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first email address of email warning function."
::= { emailAlert 3 }
emailWarningSecondEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second email address of email warning function."
::= { emailAlert 4 }
emailWarningThirdEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The third email address of email warning function."
::= { emailAlert 5 }
emailWarningFourthEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fourth email address of email warning function."
::= { emailAlert 6 }
emailAlertActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit EMail alert setting."
::= { emailAlert 7 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Auto Warning Settings -> SNMP 1.6.3.2
-- -----------------------------------------------------------------------------------------------------
snmp OBJECT IDENTIFIER ::= { autoWarming 2 }
snmpReadCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP read community name"
::= { snmp 1 }
trapServerAddr1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address/Domain name of SNMP trap server"
::= { snmp 2 }
snmpTrapCommunity1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP trap community name"
::= { snmp 3 }
trap2ServerAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address/Domain name of Second SNMP trap server"
::= { snmp 4 }
snmpTrap2Community OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Second SNMP trap community name"
::= { snmp 5 }
snmpActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit SNMP setting."
::= { snmp 6 }
SnmpInformEnable OBJECT-TYPE
SYNTAX INTEGER { trap(0), inform(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable snmp inform."
::= { snmp 7 }
SnmpInformRetries OBJECT-TYPE
SYNTAX INTEGER (1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retries of snmp inform."
::= { snmp 8 }
SnmpInformTimeout OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout of snmp inform."
::= { snmp 9 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Auto Warning Settings -> E-mail Event Setting 1.6.3.3
-- -----------------------------------------------------------------------------------------------------
emailWarningEventType OBJECT IDENTIFIER ::= { autoWarming 3 }
emailWarningEventServerColdStart OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The server cold start event of email warning function."
::= { emailWarningEventType 1 }
emailWarningEventServerWarmStart OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The server warm start event of email warning function."
::= { emailWarningEventType 2 }
emailWarningEventPowerOn2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power on event of email warning function."
::= { emailWarningEventType 3 }
emailWarningEventPowerOff2On OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power off event of email warning function."
::= { emailWarningEventType 4}
emailWarningEventDiTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmailWarningEventDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table of the email warning event."
::= { emailWarningEventType 5 }
emailWarningEventDiEntry OBJECT-TYPE
SYNTAX EmailWarningEventDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table entry of the email warning event."
INDEX { diIndex }
::= { emailWarningEventDiTable 1 }
EmailWarningEventDiEntry ::=
SEQUENCE {
emailWarningEventDiInputOn2Off
INTEGER,
emailWarningEventDiInputOff2On
INTEGER
}
emailWarningEventDiInputOn2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DI input off event of email warning function ."
::= { emailWarningEventDiEntry 1 }
emailWarningEventDiInputOff2On OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DI input on event of email warning function."
::= { emailWarningEventDiEntry 2 }
emailWarningEventConfigChange OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration changed event of email warning function."
::= { emailWarningEventType 6 }
emailWarningEventAuthFail OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication fail event of email warning function."
::= { emailWarningEventType 7 }
emailWarningEventTopologyChanged OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The communication redundancy topology changed event of email warning function."
::= { emailWarningEventType 8 }
emailWarningEventSerialPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmailWarningEventSerialPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table of the email warning event."
::= { emailWarningEventType 9 }
emailWarningEventSerialPortEntry OBJECT-TYPE
SYNTAX EmailWarningEventSerialPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table entry of the email warning event."
INDEX { portIndex }
::= { emailWarningEventSerialPortTable 1 }
EmailWarningEventSerialPortEntry ::=
SEQUENCE {
emailWarningEventSerailDCDChange
INTEGER,
emailWarningEventSerailDSRChange
INTEGER
}
emailWarningEventSerailDCDChange OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal changes to low, the NPort S8000
series device server will immediately send an e-mail
message."
::= { emailWarningEventSerialPortEntry 1 }
emailWarningEventSerailDSRChange OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered down. When the DSR signal
changes to low, the NPort S8000 series device server
will immediately send an e-mail message."
::= { emailWarningEventSerialPortEntry 2 }
emailWarningEventEthernetPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmailWarningEventEthernetPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table of the email warning event."
::= { emailWarningEventType 10 }
emailWarningEventEthernetPortEntry OBJECT-TYPE
SYNTAX EmailWarningEventEthernetPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table entry of the email warning event."
INDEX { portIndex-Eth }
::= { emailWarningEventEthernetPortTable 1 }
EmailWarningEventEthernetPortEntry ::=
SEQUENCE {
emailWarningEventEthernetPortLinkOn
INTEGER,
emailWarningEventEthernetPortLinkOff
INTEGER,
emailWarningEventEthernetPortTrafficOverload
INTEGER,
emailWarningEventEthernetPortTrafficThreshold
INTEGER,
emailWarningEventEthernetPortTrafficDuration
INTEGER
}
emailWarningEventEthernetPortLinkOn OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port link on event of email warning function."
::= { emailWarningEventEthernetPortEntry 1 }
emailWarningEventEthernetPortLinkOff OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port link off event of email warning function."
::= { emailWarningEventEthernetPortEntry 2 }
emailWarningEventEthernetPortTrafficOverload OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic overloading event of email warning function."
::= { emailWarningEventEthernetPortEntry 3 }
emailWarningEventEthernetPortTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic threshold of the overloading event."
::= { emailWarningEventEthernetPortEntry 4 }
emailWarningEventEthernetPortTrafficDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic duration of the overloading event."
::= { emailWarningEventEthernetPortEntry 5 }
emailWarningEventTypeActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit Email event type setting."
::= { emailWarningEventType 11 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Auto Warning Settings -> SNMP Trap 1.6.3.4
-- -----------------------------------------------------------------------------------------------------
snmpWarningEventType OBJECT IDENTIFIER ::= { autoWarming 4 }
snmpWarningEventServerColdStart OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The server cold start event of snmp warning function."
::= { snmpWarningEventType 1 }
snmpWarningEventServerWarmStart OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The server warm start event of snmp warning function."
::= { snmpWarningEventType 2 }
snmpWarningEventPowerOn2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power on event of snmp warning function."
::= { snmpWarningEventType 3 }
snmpWarningEventPowerOff2On OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power off event of snmp warning function."
::= { snmpWarningEventType 4}
snmpWarningEventDiTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpWarningEventDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table of the snmp warning event."
::= { snmpWarningEventType 5 }
snmpWarningEventDiEntry OBJECT-TYPE
SYNTAX SnmpWarningEventDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table entry of the snmp warning event."
INDEX { diIndex }
::= { snmpWarningEventDiTable 1 }
SnmpWarningEventDiEntry ::=
SEQUENCE {
snmpWarningEventDiInputOn2Off
INTEGER,
snmpWarningEventDiInputOff2On
INTEGER
}
snmpWarningEventDiInputOn2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DI input off event of snmp warning function ."
::= { snmpWarningEventDiEntry 1 }
snmpWarningEventDiInputOff2On OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DI input on event of snmp warning function."
::= { snmpWarningEventDiEntry 2 }
snmpWarningEventConfigChange OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration changed event of snmp warning function."
::= { snmpWarningEventType 6 }
snmpWarningEventAuthFail OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication fail event of snmp warning function."
::= { snmpWarningEventType 7 }
snmpWarningEventTopologyChanged OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The communication redundancy topology changed event of snmp warning function."
::= { snmpWarningEventType 8 }
snmpWarningEventSerailPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpWarningEventSerailPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Event Settings Table."
::= { snmpWarningEventType 9 }
snmpWarningEventSerailPortEntry OBJECT-TYPE
SYNTAX SnmpWarningEventSerailPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Event Settings entry."
INDEX { portIndex }
::= { snmpWarningEventSerailPortTable 1 }
SnmpWarningEventSerailPortEntry ::=
SEQUENCE {
snmpWarningEventSerailDCDchange
INTEGER,
snmpWarningEventSerailDSRchange
INTEGER
}
snmpWarningEventSerailDCDchange OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal changes to low, the NPort S8000
series device server will immediately send an SNMP
trap."
::= { snmpWarningEventSerailPortEntry 1 }
snmpWarningEventSerailDSRchange OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered down. When the DSR signal
changes to low, the NPort S8000 series device server
will immediately send an SNMP trap."
::= { snmpWarningEventSerailPortEntry 2 }
snmpWarningEventEthernetPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpWarningEventEthernetPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table of the snmp warning event."
::= { snmpWarningEventType 10 }
snmpWarningEventEthernetPortEntry OBJECT-TYPE
SYNTAX SnmpWarningEventEthernetPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table entry of the snmp warning event."
INDEX { portIndex-Eth }
::= { snmpWarningEventEthernetPortTable 1 }
SnmpWarningEventEthernetPortEntry ::=
SEQUENCE {
snmpWarningEventEthernetPortLinkOn
INTEGER,
snmpWarningEventEthernetPortLinkOff
INTEGER,
snmpWarningEventEthernetPortTrafficOverload
INTEGER,
snmpWarningEventEthernetPortTrafficThreshold
INTEGER,
snmpWarningEventEthernetPortTrafficDuration
INTEGER
}
snmpWarningEventEthernetPortLinkOn OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port link on event of snmp warning function."
::= { snmpWarningEventEthernetPortEntry 1 }
snmpWarningEventEthernetPortLinkOff OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port link off event of snmp warning function."
::= { snmpWarningEventEthernetPortEntry 2 }
snmpWarningEventEthernetPortTrafficOverload OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic overloading event of snmp warning function."
::= { snmpWarningEventEthernetPortEntry 3 }
snmpWarningEventEthernetPortTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic threshold of the overloading event."
::= { snmpWarningEventEthernetPortEntry 4 }
snmpWarningEventEthernetPortTrafficDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic duration of the overloading event."
::= { snmpWarningEventEthernetPortEntry 5 }
snmpWarningEventTypeActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit SNMP event type setting."
::= { snmpWarningEventType 11 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Auto Warning Settings -> Relay Alarm Setting 1.6.3.5
-- -----------------------------------------------------------------------------------------------------
relayWarning OBJECT IDENTIFIER ::= { autoWarming 5 }
relayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF RelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning table."
::= { relayWarning 1 }
relayWarningEntry OBJECT-TYPE
SYNTAX RelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Relay Warning Entry."
INDEX { relayAlarmIndex }
::= { relayWarningTable 1 }
RelayWarningEntry ::=
SEQUENCE {
relayAlarmIndex
INTEGER,
relayWarningRelayContact
INTEGER,
overrideRelayWarningSetting
INTEGER,
relayWarningPower1Off
INTEGER,
relayWarningPower1OffStatus
INTEGER,
relayWarningPower2Off
INTEGER,
relayWarningPower2OffStatus
INTEGER,
relayWarningTurboRingBreak
INTEGER,
relayWarningTurboRingBreakStatus
INTEGER
}
relayAlarmIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Relay alarm index."
::= { relayWarningEntry 1 }
relayWarningRelayContact OBJECT-TYPE
SYNTAX INTEGER {closed(0) ,opened(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first Relay contact status."
::= { relayWarningEntry 2 }
overrideRelayWarningSetting OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Override the relay warning setting."
::= { relayWarningEntry 3 }
relayWarningPower1Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the first power input off."
::= { relayWarningEntry 4 }
relayWarningPower1OffStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the first power input off.."
::= { relayWarningEntry 5 }
relayWarningPower2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the second power input off."
::= { relayWarningEntry 6 }
relayWarningPower2OffStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the second power input off."
::= { relayWarningEntry 7 }
relayWarningTurboRingBreak OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while turbo ring break."
::= { relayWarningEntry 8 }
relayWarningTurboRingBreakStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened while turbo ring is broken."
::= { relayWarningEntry 9 }
portRelayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning port table."
::= { relayWarning 2 }
portRelayWarningEntry OBJECT-TYPE
SYNTAX PortRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Relay Warning Entry."
INDEX { portIndex,relayAlarmIndex }
::= { portRelayWarningTable 1 }
PortRelayWarningEntry ::=
SEQUENCE {
relayWarningLinkChanged
INTEGER,
relayWarningLinkChangedStatus
INTEGER,
relayWarningTrafficOverload
INTEGER,
relayWarningTrafficOverloadStatus
INTEGER,
relayWarningTrafficThreshold
INTEGER,
relayWarningTrafficDuration
INTEGER
}
relayWarningLinkChanged OBJECT-TYPE
SYNTAX INTEGER { ignore(0), on2off(1), off2on(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while this port's link status is changed."
::= { portRelayWarningEntry 1 }
relayWarningLinkChangedStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as this port's link status is changed."
::= { portRelayWarningEntry 2 }
relayWarningTrafficOverload OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while this port's traffic is overload."
::= { portRelayWarningEntry 3 }
relayWarningTrafficOverloadStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as this port's traffic is overload."
::= { portRelayWarningEntry 4 }
relayWarningTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of the port traffic will be over loading."
::= { portRelayWarningEntry 5 }
relayWarningTrafficDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of the port traffic will be over loading."
::= { portRelayWarningEntry 6 }
diRelayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning DI table."
::= { relayWarning 3 }
diRelayWarningEntry OBJECT-TYPE
SYNTAX DiRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DI Relay Warning Entry."
INDEX { diIndex,relayAlarmIndex }
::= { diRelayWarningTable 1 }
DiRelayWarningEntry ::=
SEQUENCE {
relayWarningDiInputChanged
INTEGER,
relayWarningDiInputChangedStatus
INTEGER
}
relayWarningDiInputChanged OBJECT-TYPE
SYNTAX INTEGER { disable(0), off(1), on(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the DI input changed."
::= { diRelayWarningEntry 1 }
relayWarningDiInputChangedStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the first DI input changed.."
::= { diRelayWarningEntry 2 }
relayWarningActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit relay warring setting."
::= { relayWarning 4 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Auto Warning Settings -> System Log Setting 1.6.3.6
-- -----------------------------------------------------------------------------------------------------
sysLogSettings OBJECT IDENTIFIER ::= { autoWarming 6 }
sysLocalLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following events to the system log: System Cold
Start, System Warm Start."
::= { sysLogSettings 1 }
networkLocalLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following events to the system log:
DHCP/BOOTP/PPPoE Get IP/Renew, NTP, Mail Fail, NTP
Connect Fail, DHCP Fail, IP Conflict, Ethernet Link
Down."
::= { sysLogSettings 2 }
configLocalLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following events to the system log: Login Fail, IP
Changed, Password Changed, Config Changed, Firmware
Upgrade, SSL Key Import, Config Import, Config
Export."
::= { sysLogSettings 3 }
opModeLocalLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following op-mode events to the system log:
Connect, Disconnect, Authentication Fail, Restart."
::= { sysLogSettings 4 }
sysRemoteLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following events to the remote log server: System Cold
Start, System Warm Start."
::= { sysLogSettings 5 }
networkRemoteLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following events to the remote log server:
DHCP/BOOTP/PPPoE Get IP/Renew, NTP, Mail Fail, NTP
Connect Fail, DHCP Fail, IP Conflict, Ethernet Link
Down."
::= { sysLogSettings 6 }
configRemoteLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following events to the remote log server: Login Fail, IP
Changed, Password Changed, Config Changed, Firmware
Upgrade, SSL Key Import, Config Import, Config
Export."
::= { sysLogSettings 7 }
opModeRemoteLog OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log the following op-mode events to the remote log server:
Connect, Disconnect, Authentication Fail, Restart."
::= { sysLogSettings 8 }
sysLogSettingsActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit sysLog setting."
::= { sysLogSettings 9 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Maintenance 1.6.4
-- -----------------------------------------------------------------------------------------------------
maintenance OBJECT IDENTIFIER ::= { systemManagement 4 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Maintenance -> Console setting 1.6.4.1
-- -----------------------------------------------------------------------------------------------------
consoleSetting OBJECT IDENTIFIER ::= { maintenance 1 }
webConsole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Web console."
::= { consoleSetting 1 }
httpConsole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable HTTP console."
::= { consoleSetting 2 }
telnetConsole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Telnet console."
::= { consoleSetting 3 }
resetButtonFunction OBJECT-TYPE
SYNTAX INTEGER { disable-after-60-sec-uptime(0), always-enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable reset button protection. You can
disable the hardware reset button after the NPort S8000
series device server has been restarted for 60 seconds."
::= { consoleSetting 4 }
autoRefresh OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Monitor refresh time."
::= { consoleSetting 5 }
consoleSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit console setting."
::= { consoleSetting 6 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Maintenance -> Load Factory Default 1.6.4.2
-- -----------------------------------------------------------------------------------------------------
loadFactoryDefault OBJECT IDENTIFIER ::= { maintenance 2 }
loadFactoryDefaultSetting OBJECT-TYPE
SYNTAX INTEGER {
resetToFactoryDefault (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This function will reset all of the NPort S8000 series
device server's settings to the factory default
values. Be aware that previous settings will be
lost. Selecting Reset to factory default will reset all
settings including the IP configuration to factory
defaults and restart immediately."
::= { loadFactoryDefault 1 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Maintenance -> Change Password 1.6.4.3
-- -----------------------------------------------------------------------------------------------------
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Maintenance -> Mirror 1.6.4.4
-- -----------------------------------------------------------------------------------------------------
mirroring OBJECT IDENTIFIER ::= { maintenance 4 }
targetPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mirrored port of mirroring function."
::= { mirroring 1 }
monitorDirection OBJECT-TYPE
SYNTAX INTEGER
{
inputDataStream(0),
outputDataStream(1),
biDirectional(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The traffic direction of mirroring function."
::= { mirroring 2 }
mirroringPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mirroring port of mirroring function."
::= { mirroring 3 }
mirroringActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit mirroring setting."
::= { mirroring 4 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> TFTP Setting 1.6.5
-- -----------------------------------------------------------------------------------------------------
sysFileUpdate OBJECT IDENTIFIER ::= { systemManagement 5 }
tftpServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP Server name(IP Address)"
::= { sysFileUpdate 1 }
confPathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of configuration file in the TFTP Server"
::= { sysFileUpdate 2 }
firmwarePathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of firmware file in the TFTP Server"
::= { sysFileUpdate 3 }
logPathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of log file in the TFTP Server"
::= { sysFileUpdate 4 }
sysFileUpdateActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit sysFileUpdate setting."
::= { sysFileUpdate 5 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> Dip Switch Setting 1.6.6
-- -----------------------------------------------------------------------------------------------------
dipSwitchSetting OBJECT IDENTIFIER ::= { systemManagement 6 }
dipSwitchEnableTurboRing OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable TurboRing Dip Switch functions"
::= { dipSwitchSetting 1 }
dipSwitchTurboRingType OBJECT-TYPE
SYNTAX INTEGER { turbo-Ring(1), turbo-Ring-V2(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set DIP switch"
::= { dipSwitchSetting 2 }
dipSwitchSettingActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit dip switch setting."
::= { dipSwitchSetting 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Management -> LLDP 1.6.7
-- -----------------------------------------------------------------------------------------------------
lldp OBJECT IDENTIFIER ::= { systemManagement 7 }
lldpEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable LLDP function"
::= { lldp 1 }
lldpMsgTxInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP message transmit interval(valid range 5~32768)"
::= { lldp 2 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring 1.7
-- -----------------------------------------------------------------------------------------------------
systemMonitoring OBJECT IDENTIFIER ::= { swMgmt 7 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Serial Status 1.7.1
-- -----------------------------------------------------------------------------------------------------
serialStatus OBJECT IDENTIFIER ::= { systemMonitoring 1 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Serial Status -> Serial to Network Connections 1.7.1.1
-- -----------------------------------------------------------------------------------------------------
s2eConnections OBJECT IDENTIFIER ::= { serialStatus 1 }
monitorRemoteIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorRemoteIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial to Network Connections Remote IP table."
::= { s2eConnections 1 }
monitorRemoteIpEntry OBJECT-TYPE
SYNTAX MonitorRemoteIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial to Network Connections Remote IP entry."
INDEX { portIndex, remoteIpIndex }
::= { monitorRemoteIpTable 1 }
MonitorRemoteIpEntry ::=
SEQUENCE {
remoteIpIndex
INTEGER,
monitorRemoteIp
DisplayString,
monitorCipher
DisplayString
}
remoteIpIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial to Network Connections Remote IP index."
::= { monitorRemoteIpEntry 1 }
monitorRemoteIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP currently connecting to this port."
::= { monitorRemoteIpEntry 2 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Serial Status -> Serial Port Status 1.7.1.2
-- -----------------------------------------------------------------------------------------------------
serialPortStatus OBJECT IDENTIFIER ::= { serialStatus 2 }
monitorSerialPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorSerialPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial Port Status table."
::= { serialPortStatus 1 }
monitorSerialPortStatusEntry OBJECT-TYPE
SYNTAX MonitorSerialPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial Port Status entry."
INDEX { portIndex }
::= { monitorSerialPortStatusTable 1 }
MonitorSerialPortStatusEntry ::=
SEQUENCE {
monitorTxCount
INTEGER,
monitorRxCount
INTEGER,
monitorTxTotalCount
INTEGER,
monitorRxTotalCount
INTEGER,
monitorDSR
INTEGER,
monitorDTR
INTEGER,
monitorRTS
INTEGER,
monitorCTS
INTEGER,
monitorDCD
INTEGER
}
monitorTxCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of bytes transmitted from the port
since the last time the port was initialized."
::= { monitorSerialPortStatusEntry 1 }
monitorRxCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of bytes received by the port since
the last time the port was initialized."
::= { monitorSerialPortStatusEntry 2 }
monitorTxTotalCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of bytes transmitted from the port
since the last time the system was initialized."
::= { monitorSerialPortStatusEntry 3 }
monitorRxTotalCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of bytes received by the port since
the last time the system was initialized."
::= { monitorSerialPortStatusEntry 4 }
monitorDSR OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the current DSR status of this port."
::= { monitorSerialPortStatusEntry 5 }
monitorDTR OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the current DTR status of this port."
::= { monitorSerialPortStatusEntry 6 }
monitorRTS OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the current RTS status of this port."
::= { monitorSerialPortStatusEntry 7 }
monitorCTS OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the current CTS status of this port."
::= { monitorSerialPortStatusEntry 8 }
monitorDCD OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the current DCD status of this port."
::= { monitorSerialPortStatusEntry 9 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Serial Status -> Serial Port Error Count 1.7.1.3
-- -----------------------------------------------------------------------------------------------------
serialPortErrorCount OBJECT IDENTIFIER ::= { serialStatus 3 }
monitorSerialPortErrorCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorSerialPortErrorCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial Port Error Count table."
::= { serialPortErrorCount 1 }
monitorSerialPortErrorCountEntry OBJECT-TYPE
SYNTAX MonitorSerialPortErrorCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial Port Error Count entry."
INDEX { portIndex }
::= { monitorSerialPortErrorCountTable 1 }
MonitorSerialPortErrorCountEntry ::=
SEQUENCE {
monitorErrorCountFrame
INTEGER,
monitorErrorCountParity
INTEGER,
monitorErrorCountOverrun
INTEGER,
monitorErrorCountBreak
INTEGER
}
monitorErrorCountFrame OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of 'Frame' errors for this port."
::= { monitorSerialPortErrorCountEntry 1 }
monitorErrorCountParity OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of 'Parity' errors for this port."
::= { monitorSerialPortErrorCountEntry 2 }
monitorErrorCountOverrun OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of 'Overrun' errors for this port."
::= { monitorSerialPortErrorCountEntry 3 }
monitorErrorCountBreak OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of 'Break' errors for this port."
::= { monitorSerialPortErrorCountEntry 4 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Serial Status -> Serial Port Settings 1.7.1.4
-- -----------------------------------------------------------------------------------------------------
serialPortSettings OBJECT IDENTIFIER ::= { serialStatus 4 }
monitorSerialPortSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorSerialPortSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial Port Settings table."
::= { serialPortSettings 1 }
monitorSerialPortSettingsEntry OBJECT-TYPE
SYNTAX MonitorSerialPortSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial Port Settings entry."
INDEX { portIndex }
::= { monitorSerialPortSettingsTable 1 }
MonitorSerialPortSettingsEntry ::=
SEQUENCE {
monitorBaudRate
INTEGER,
monitorDataBits
INTEGER,
monitorStopBits
DisplayString,
monitorParity
INTEGER,
monitorRTSCTSFlowControl
INTEGER,
monitorXONXOFFFlowControl
INTEGER,
monitorFIFO
INTEGER,
monitorInterface
INTEGER
}
monitorBaudRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the current baudrate of the port."
::= { monitorSerialPortSettingsEntry 1 }
monitorDataBits OBJECT-TYPE
SYNTAX INTEGER {
bits-5(0),
bits-6(1),
bits-7(2),
bits-8(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of bits per byte for the port."
::= { monitorSerialPortSettingsEntry 2 }
monitorStopBits OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the number of stop bits for the port."
::= { monitorSerialPortSettingsEntry 3 }
monitorParity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
odd(8),
even(24),
mark(40),
space(56)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the parity bit for the port."
::= { monitorSerialPortSettingsEntry 4 }
monitorRTSCTSFlowControl OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View if the port is using RTS/CTS flow control."
::= { monitorSerialPortSettingsEntry 5 }
monitorXONXOFFFlowControl OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View if the port is using XON/XOFF flow control."
::= { monitorSerialPortSettingsEntry 6 }
monitorFIFO OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View FIFO status of this port."
::= { monitorSerialPortSettingsEntry 7 }
monitorInterface OBJECT-TYPE
SYNTAX INTEGER {
rs-232(0),
rs-422(1),
rs-485-2-wire(2),
rs-485-4-wire(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View the serial interface that the port is using."
::= { monitorSerialPortSettingsEntry 8 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> System Status 1.7.2
-- -----------------------------------------------------------------------------------------------------
systemStatus OBJECT IDENTIFIER ::= { systemMonitoring 2 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> System Status -> System Information 1.7.2.1
-- -----------------------------------------------------------------------------------------------------
systemInfo OBJECT IDENTIFIER ::= { systemStatus 1 }
power1InputStatus OBJECT-TYPE
SYNTAX INTEGER { not-present(0), present(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the first power input."
::= { systemInfo 1 }
power2InputStatus OBJECT-TYPE
SYNTAX INTEGER { not-present(0), present(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the second power input."
::= { systemInfo 2 }
monitorDiTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table of monitor function."
::= { systemInfo 3 }
monitorDiEntry OBJECT-TYPE
SYNTAX MonitorDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table entry of monitor function."
INDEX { diIndex }
::= { monitorDiTable 1 }
MonitorDiEntry ::=
SEQUENCE {
diIndex
INTEGER,
diInputStatus
INTEGER
}
diIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DI index of monitor function"
::= { monitorDiEntry 1 }
diInputStatus OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DI input status."
::= { monitorDiEntry 2 }
dipSwitchTurboRingPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TurboRing Pole status of Dip switch."
::= { systemInfo 4 }
dipSwitchRingCouplingPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ring Coupling Pole status of Dip switch."
::= { systemInfo 5 }
dipSwitchRingMasterPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ring Master Pole status of Dip switch."
::= { systemInfo 6 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> System Status -> Network Connections 1.7.2.2
-- -----------------------------------------------------------------------------------------------------
networkConnected OBJECT IDENTIFIER ::= { systemStatus 2 }
networkConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table."
::= { networkConnected 1 }
networkConnEntry OBJECT-TYPE
SYNTAX NetworkConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table entry."
INDEX { NULL }
::= { networkConnTable 1 }
NetworkConnEntry ::=
SEQUENCE {
protocol
INTEGER,
recv-q
INTEGER,
send-q
INTEGER,
localIpAddress
IpAddress,
localPort
INTEGER,
remoteIpAddress
IpAddress,
remotePort
INTEGER,
state
INTEGER
}
protocol OBJECT-TYPE
SYNTAX INTEGER {
udp(0),
tcp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connected potocol."
::= { networkConnEntry 1 }
recv-q OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receiver queue size."
::= { networkConnEntry 2 }
send-q OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Send queue size."
::= { networkConnEntry 3 }
localIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local IP Address."
::= { networkConnEntry 4 }
localPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local port."
::= { networkConnEntry 5 }
remoteIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote IP Address."
::= { networkConnEntry 6 }
remotePort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote port."
::= { networkConnEntry 7 }
state OBJECT-TYPE
SYNTAX INTEGER {
closed(0),
listen(1),
synSend(2),
synRecvd(3),
estab(4),
closeWait(5),
finWait1(6),
closing(7),
lastAck(8),
finWait2(9),
timeWait(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connected state."
::= { networkConnEntry 8 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> System Status -> Event Log 1.7.2.3
-- -----------------------------------------------------------------------------------------------------
eventLog OBJECT IDENTIFIER ::= { systemStatus 3 }
eventLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table."
::= { eventLog 1 }
eventLogEntry OBJECT-TYPE
SYNTAX EventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table entry."
INDEX { eventListIndex }
::= { eventLogTable 1 }
EventLogEntry ::=
SEQUENCE {
eventListIndex
INTEGER,
eventListBootup
INTEGER,
eventListData
DisplayString,
eventListTime
DisplayString,
eventListSysUpTime
DisplayString,
eventListEvent
DisplayString
}
eventListIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"index."
::= { eventLogEntry 1 }
eventListBootup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"index."
::= { eventLogEntry 2 }
eventListData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"index."
::= { eventLogEntry 3 }
eventListTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"index."
::= { eventLogEntry 4 }
eventListSysUpTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"index."
::= { eventLogEntry 5 }
eventListEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"index."
::= { eventLogEntry 6 }
eventListClear OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"index."
::= { eventLog 2 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> System Status -> Serial data Log 1.7.2.5
-- -----------------------------------------------------------------------------------------------------
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status 1.7.3
-- -----------------------------------------------------------------------------------------------------
ethernetStatus OBJECT IDENTIFIER ::= { systemMonitoring 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> MAC Address List 1.7.3.1
-- -----------------------------------------------------------------------------------------------------
macAddressList OBJECT IDENTIFIER ::= { ethernetStatus 1 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> IGMP table 1.7.3.2
-- -----------------------------------------------------------------------------------------------------
igmpstatus OBJECT IDENTIFIER ::= { ethernetStatus 2 }
igmpSnoopingMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopingMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group table by IGMP snooping function."
::= { igmpstatus 1 }
igmpSnoopingMulticastGroupEntry OBJECT-TYPE
SYNTAX IgmpSnoopingMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group entry by IGMP snooping function."
-- INDEX { vlanId,multicastIpGroup }
INDEX { vlanId, igmpSnoopingIpGroup }
::= { igmpSnoopingMulticastGroupTable 1 }
IgmpSnoopingMulticastGroupEntry ::=
SEQUENCE {
learnedMulticastQuerierPorts
PortList,
igmpSnoopingIpGroup
IpAddress,
igmpSnoopingMacGroup
MacAddress,
igmpSnoopingJoinedPorts
PortList
}
learnedMulticastQuerierPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that multicast-Querier exist."
::= { igmpSnoopingMulticastGroupEntry 1 }
igmpSnoopingIpGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast IP group by IGMP snooping function."
::= { igmpSnoopingMulticastGroupEntry 2 }
igmpSnoopingMacGroup OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast MAC group by IGMP snooping function."
::= { igmpSnoopingMulticastGroupEntry 3 }
igmpSnoopingJoinedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that joined this multicast group."
::= { igmpSnoopingMulticastGroupEntry 4 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> GMRP Table 1.7.3.3
-- -----------------------------------------------------------------------------------------------------
gmrpStatus OBJECT IDENTIFIER ::= { ethernetStatus 3 }
gmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP status table."
::= { gmrpStatus 1 }
gmrpEntry OBJECT-TYPE
SYNTAX GmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP Status Entry."
INDEX { gmrpMulticastGroup }
::= { gmrpTable 1 }
GmrpEntry ::=
SEQUENCE {
gmrpMulticastGroup
MacAddress,
gmrpFixedPorts
PortList,
gmrpLearnedPorts
PortList
}
gmrpMulticastGroup OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GMRP multicast group."
::= { gmrpEntry 1 }
gmrpFixedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that joined GMRP multicast group manually."
::= { gmrpEntry 2 }
gmrpLearnedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that joined GMRP multicast group by GMRP learning."
::= { gmrpEntry 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> 802.1X Reauth 1.7.3.4
-- -----------------------------------------------------------------------------------------------------
dot1XReauth OBJECT IDENTIFIER ::= { ethernetStatus 4 }
dot1xReauthTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xReauthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Re-authentication Table."
::= { dot1XReauth 1 }
dot1xReauthEntry OBJECT-TYPE
SYNTAX Dot1xReauthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Re-authentication Entry."
INDEX { dot1xReauthPortIndex }
::= { dot1xReauthTable 1 }
Dot1xReauthEntry ::=
SEQUENCE {
dot1xReauthPortIndex
INTEGER,
dot1xReauth
INTEGER
}
dot1xReauthPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IEEE 802.1X Enabled Port Index."
::= { dot1xReauthEntry 1 }
dot1xReauth OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reauth IEEE 802.1X."
::= { dot1xReauthEntry 2 }
dot1XReauthActive OBJECT-TYPE
SYNTAX INTEGER { active(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Submit dot1X Reauth setting."
::= { dot1XReauth 2 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> Port Access Control Table 1.7.3.5
-- -----------------------------------------------------------------------------------------------------
portAccessControlList OBJECT IDENTIFIER ::= { ethernetStatus 5 }
portAccessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table."
::= { portAccessControlList 1 }
portAccessControlEntry OBJECT-TYPE
SYNTAX PortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table entry."
INDEX { portAccessControlAddress }
::= { portAccessControlTable 1 }
PortAccessControlEntry ::=
SEQUENCE {
portAccessControlAddress
MacAddress,
portAccessControlPortNo
INTEGER,
portAccessControlAccessStatus
INTEGER,
portAccessControlStatus
INTEGER
}
portAccessControlAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address which is static locked or IEEE 802.1X authorized."
::= { portAccessControlEntry 1 }
portAccessControlPortNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number that the Port Access Control address resides."
::= { portAccessControlEntry 2 }
portAccessControlAccessStatus OBJECT-TYPE
SYNTAX INTEGER {
staticLock(1),
authorized(2),
unAuthorized(3),
authorizing(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access status of the Port Access Control address."
::= { portAccessControlEntry 3 }
portAccessControlStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then actvie.
Use destroy to delete this row."
::= { portAccessControlEntry 4 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> Warning List 1.7.3.6
-- -----------------------------------------------------------------------------------------------------
warningList OBJECT IDENTIFIER ::= { ethernetStatus 6 }
warningListTable OBJECT-TYPE
SYNTAX SEQUENCE OF WarningListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table."
::= { warningList 1 }
warningListEntry OBJECT-TYPE
SYNTAX WarningListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table entry."
INDEX { warningListIndex }
::= { warningListTable 1 }
WarningListEntry ::=
SEQUENCE {
warningListIndex
INTEGER,
warningListEvent
DisplayString,
warningListRelay
INTEGER
}
warningListIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { warningListEntry 1 }
warningListEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { warningListEntry 2 }
warningListRelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { warningListEntry 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> Ethernet Monitor 1.7.3.7
-- -----------------------------------------------------------------------------------------------------
ethernetMonitor OBJECT IDENTIFIER ::= { ethernetStatus 7 }
ethernetMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthernetMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table."
::= { ethernetMonitor 1 }
ethernetMonitorEntry OBJECT-TYPE
SYNTAX EthernetMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table entry."
INDEX { portIndex-Eth }
::= { ethernetMonitorTable 1 }
EthernetMonitorEntry ::=
SEQUENCE {
ethernetMonitorTxTotal
INTEGER,
ethernetMonitorTxUicast
INTEGER,
ethernetMonitorTxMulticast
INTEGER,
ethernetMonitorTxBroadcast
INTEGER,
ethernetMonitorTxCollision
INTEGER,
ethernetMonitorRxTotal
INTEGER,
ethernetMonitorRxUicast
INTEGER,
ethernetMonitorRxMulticast
INTEGER,
ethernetMonitorRxBroadcast
INTEGER,
ethernetMonitorRxPause
INTEGER,
ethernetMonitorTxErr
INTEGER,
ethernetMonitorTxErrLate
INTEGER,
ethernetMonitorTxErrExcessive
INTEGER,
ethernetMonitorRxErr
INTEGER,
ethernetMonitorRxErrCRC
INTEGER,
ethernetMonitorRxErrDiscard
INTEGER,
ethernetMonitorRxErrUndersize
INTEGER,
ethernetMonitorRxErrFragments
INTEGER,
ethernetMonitorRxErrOversize
INTEGER,
ethernetMonitorRxErrJabber
INTEGER
}
ethernetMonitorTxTotal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 1 }
ethernetMonitorTxUicast OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 2 }
ethernetMonitorTxMulticast OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 3 }
ethernetMonitorTxBroadcast OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 4 }
ethernetMonitorTxCollision OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 5 }
ethernetMonitorRxTotal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 6 }
ethernetMonitorRxUicast OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 7 }
ethernetMonitorRxMulticast OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 8 }
ethernetMonitorRxBroadcast OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 9 }
ethernetMonitorRxPause OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 10 }
ethernetMonitorTxErr OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 11 }
ethernetMonitorTxErrLate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 12 }
ethernetMonitorTxErrExcessive OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 13 }
ethernetMonitorRxErr OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 14 }
ethernetMonitorRxErrCRC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 15 }
ethernetMonitorRxErrDiscard OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 16}
ethernetMonitorRxErrUndersize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 17 }
ethernetMonitorRxErrFragments OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 18 }
ethernetMonitorRxErrOversize OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 19 }
ethernetMonitorRxErrJabber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ethernetMonitorEntry 20 }
ethernetMonitorReset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ethernetMonitor 2 }
monitorPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table of monitor function."
::= { ethernetMonitor 3 }
monitorPortEntry OBJECT-TYPE
SYNTAX MonitorPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table entry of monitor function."
INDEX { portIndex }
::= { monitorPortTable 1 }
MonitorPortEntry ::=
SEQUENCE {
monitorLinkStatus
INTEGER,
monitorSpeed
INTEGER,
monitorFDXFlowCtrl
INTEGER,
monitorAutoMDI
INTEGER,
monitorConnectedIP
DisplayString,
monitorTraffic
INTEGER
}
monitorLinkStatus OBJECT-TYPE
SYNTAX INTEGER { disable(-1), off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port link status."
::= { monitorPortEntry 1}
monitorSpeed OBJECT-TYPE
SYNTAX INTEGER
{
speed100M-Full(3),
speed100M-Half(2),
speed10M-Full(1),
speed10M-Half(0),
na(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port speed and duplex status."
::= { monitorPortEntry 2 }
monitorFDXFlowCtrl OBJECT-TYPE
SYNTAX INTEGER { off(0),on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Full-Duplex flow control status"
::= { monitorPortEntry 3 }
monitorAutoMDI OBJECT-TYPE
SYNTAX INTEGER
{
mdiX(1),
mdi(0),
na(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port MDI/MDIX status."
::= { monitorPortEntry 4 }
monitorConnectedIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP of connected device."
::= { monitorPortEntry 5 }
monitorTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trafic loading percentage of port."
::= { monitorPortEntry 6 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> Trunk Table 1.7.3.8
-- -----------------------------------------------------------------------------------------------------
trunkTableList OBJECT IDENTIFIER ::= { ethernetStatus 8 }
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Table."
::= { trunkTableList 1 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Entry."
INDEX { trunkIndex, trunkPort }
::= { trunkTable 1 }
TrunkEntry ::=
SEQUENCE {
trunkIndex
INTEGER,
trunkPort
INTEGER,
trunkStatus
INTEGER
}
trunkIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Index."
::= { trunkEntry 1 }
trunkPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Member Port."
::= { trunkEntry 2 }
trunkStatus OBJECT-TYPE
SYNTAX INTEGER {
success(1),
fail(2),
standby(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Port Status."
::= { trunkEntry 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> VLAN Table 1.7.3.9
-- -----------------------------------------------------------------------------------------------------
vlanList OBJECT IDENTIFIER ::= { ethernetStatus 9 }
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN table."
::= { vlanList 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN Entry."
INDEX { vlanId }
::= { vlanTable 1 }
VlanEntry ::=
SEQUENCE {
vlanId
INTEGER,
joinedAccessPorts
PortList,
joinedTrunkPorts
PortList
}
vlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN id."
::= { vlanEntry 1 }
joinedAccessPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access ports that joined this VID."
::= { vlanEntry 2 }
joinedTrunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk ports that joined this VID."
::= { vlanEntry 3 }
-- -----------------------------------------------------------------------------------------------------
-- System Monitoring -> Ethernet Status -> Communication Redundancy Status 1.7.3.10
-- -----------------------------------------------------------------------------------------------------
commRedStatus OBJECT IDENTIFIER ::= { ethernetStatus 10 }
activeProtocolOfRedundancy OBJECT-TYPE
SYNTAX INTEGER { none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This shows the active redundancy protocol of this server now. The none(0) stauts will
be showed if only if the server's redundancy protocol is set to spanning tree and none of
ports enable spanning tree."
::= { commRedStatus 1 }
spanningTreeStatus OBJECT IDENTIFIER ::= { commRedStatus 2 }
spanningTreeRoot OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The root of spanning tree."
::= { spanningTreeStatus 1 }
spanningTreeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpanningTreeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree table."
::= { spanningTreeStatus 2 }
spanningTreeStatusEntry OBJECT-TYPE
SYNTAX SpanningTreeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree port entry."
INDEX { spanningTreeIndex }
::= { spanningTreeStatusTable 1 }
SpanningTreeStatusEntry ::=
SEQUENCE {
spanningTreePortStatus
INTEGER
}
spanningTreePortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notSpanningTreePort(1),
linkDown(2),
blocked(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port status of spanning tree protocol."
::= { spanningTreeStatusEntry 1 }
turboRingStatus OBJECT IDENTIFIER ::= { commRedStatus 3 }
turboRingMaster OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRingStatus 1 }
turboRingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TurboRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Turbo Ring Port Table."
::= { turboRingStatus 2 }
turboRingPortEntry OBJECT-TYPE
SYNTAX TurboRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Turbo Ring Port Entry."
INDEX { turboRingPortIndex }
::= { turboRingPortTable 1 }
TurboRingPortEntry ::=
SEQUENCE {
turboRingPortIndex
INTEGER,
turboRingPortStatus
INTEGER,
turboRingPortDesignatedBridge
OCTET STRING,
turboRingPortDesignatedPort
INTEGER
}
turboRingPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring Port Index."
::= { turboRingPortEntry 1 }
turboRingPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notTurboRingPort(1),
linkDown(2),
blocked(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring Port Status."
::= { turboRingPortEntry 2 }
turboRingPortDesignatedBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
::= { turboRingPortEntry 3 }
turboRingPortDesignatedPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Number of the port on the Designated
Bridge for this port's segment."
::= { turboRingPortEntry 4 }
turboRingDesignatedMaster OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the bridge which is the Master of the TURBO RING."
::= { turboRingStatus 3 }
turboRingCouplingPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notCouplingPort(1),
linkDown(2),
blocked(3),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The coupling port status of ring coupling function."
::= { turboRingStatus 4 }
turboRingControlPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notControlPort(1),
linkDown(2),
blocked(3),
forwarding(5),
inactive(6),
active(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The control port status of ring coupling function."
::= { turboRingStatus 5 }
turboRingBrokenStatus OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring broken display."
::= { turboRingStatus 6 }
turboRingV2Status OBJECT IDENTIFIER ::= { commRedStatus 4 }
turboRingV2Ring1Status OBJECT IDENTIFIER ::= { turboRingV2Status 1 }
masterStatusRing1 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRingV2Ring1Status 1 }
designatedMasterRing1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the bridge which is the Master of the turboRingV2."
::= { turboRingV2Ring1Status 2 }
rdnt1stPortStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring1Status 3 }
rdnt2ndPortStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring1Status 4 }
brokenStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"turboRingV2 broken display."
::= { turboRingV2Ring1Status 5 }
turboRingV2Ring2Status OBJECT IDENTIFIER ::= { turboRingV2Status 2 }
masterStatusRing2 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRingV2Ring2Status 1 }
designatedMasterRing2 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the bridge which is the Master of the turboRingV2."
::= { turboRingV2Ring2Status 2 }
rdnt1stPortStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring2Status 3 }
rdnt2ndPortStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring2Status 4 }
brokenStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"turboRingV2 broken display."
::= { turboRingV2Ring2Status 5 }
turboRingV2CouplingStatus OBJECT IDENTIFIER ::= { turboRingV2Status 3 }
coupling1stPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1st coupling port status of coupling function."
::= { turboRingV2CouplingStatus 1 }
coupling2ndPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 2nd coupling port status of coupling function."
::= { turboRingV2CouplingStatus 2 }
turboChainStatus OBJECT IDENTIFIER ::= { commRedStatus 5 }
turboChainPort1Status OBJECT-TYPE
SYNTAX INTEGER
{
notTurboChainPort(0),
linkDown(1),
blocking(2),
blocked(3),
forwarding(4),
na(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Chain Port 1 Status"
::= { turboChainStatus 1 }
turboChainPort2Status OBJECT-TYPE
SYNTAX INTEGER
{
notTurboChainPort(0),
linkDown(1),
blocking(2),
blocked(3),
forwarding(4),
na(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Chain Port 2 Status"
::= { turboChainStatus 2 }
turboChainPort1PartnerBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the bridge which is attatched to this device's Turbo Chain Port 1."
::= { turboChainStatus 3 }
turboChainPort2PartnerBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the bridge which is attatched to this device's Turbo Chain Port 2."
::= { turboChainStatus 4 }
-- -----------------------------------------------------------------------------------------------------
-- Restart 1.8
-- -----------------------------------------------------------------------------------------------------
restart OBJECT IDENTIFIER ::= { swMgmt 8 }
-- -----------------------------------------------------------------------------------------------------
-- Restart -> restart system 1.8.1
-- -----------------------------------------------------------------------------------------------------
restartSystem OBJECT-TYPE
SYNTAX INTEGER {
restart(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restart the NPort S8000 series device server. Be sure
to save all of your configuration changes before
you restart the system. Otherwise, all of the changes will be
lost."
::= { restart 1 }
-- -----------------------------------------------------------------------------------------------------
-- Restart -> restart port 1.8.2
-- -----------------------------------------------------------------------------------------------------
restartPortNumber OBJECT-TYPE
SYNTAX INTEGER {
port1(0),
port2(1),
port3(2),
port4(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restart serial port. Restarting will cause port reseting."
::= { restart 2 }
END
View Git Blame Copy Permalink