Observium_CE/mibs/mitel/MITEL-WANBACKUP-MIB

171 lines
5.5 KiB
Plaintext

-- Copyright 2001 MITEL Corporation
-- All rights reserved.
-- This MITEL SNMP Management Information Base Specification
-- (Specification) embodies MITEL's confidential and
-- proprietary intellectual property. MITEL retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS", and MITEL makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
MITEL-WANBACKUP-MIB
DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, enterprises,
Integer32, IpAddress
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC;
mitelIpGrpBackupWANGroup MODULE-IDENTITY
LAST-UPDATED "200303241103Z"
ORGANIZATION "MITEL Corporation"
CONTACT-INFO "Standards Group,
Postal: MITEL Corporation
350 Legget Drive, PO Box 13089
Kanata, Ontario
Canada K2K 1X3
Tel: +1 613 592 2122
Fax: +1 613 592 4784
E-mail: std@mitel.com"
DESCRIPTION "The MITEL IP MIB module."
REVISION "200303241103Z"
DESCRIPTION "IP MIB Version 1.0"
REVISION "199903010000Z"
DESCRIPTION "IP MIB Version 1.0"
::= { mitelRouterIpGroup 6 }
mitel OBJECT IDENTIFIER ::= { enterprises 1027}
mitelProprietary OBJECT IDENTIFIER ::= { mitel 4}
mitelPropIpNetworking OBJECT IDENTIFIER ::= { mitelProprietary 8 }
mitelIpNetRouter OBJECT IDENTIFIER ::= { mitelPropIpNetworking 1 }
mitelRouterIpGroup OBJECT IDENTIFIER ::= { mitelIpNetRouter 1 }
-- WAN Ethernet Backup Application GROUP OBJECTS
-- =============================================
mitelBackupWANDestIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the destination used to backup WAN Ethernet
connection."
::= { mitelIpGrpBackupWANGroup 1 }
mitelBackupWANEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the backup WAN Ethernet
application."
::= { mitelIpGrpBackupWANGroup 2 }
mitelBackupWANPollFreq OBJECT-TYPE
SYNTAX INTEGER (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object tells the WAN Ethernet application how
often it polls the destination. "
-- DEFAULT {5}
::= { mitelIpGrpBackupWANGroup 3 }
mitelBackupWANLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows whether the backup is up and running, or down. "
::= { mitelIpGrpBackupWANGroup 4 }
-- WAN Ethernet Backup Application Server Table
-- ============================================
mitelBackupWANServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MitelBackupWANServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a list of servers the Backup WAN
application monitors."
::= { mitelIpGrpBackupWANGroup 5 }
mitelBackupWANServerEntry OBJECT-TYPE
SYNTAX MitelBackupWANServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table contains information of a
server."
INDEX { mitelBackupWANServerIPAddr }
::= { mitelBackupWANServerTable 1 }
MitelBackupWANServerEntry ::=
SEQUENCE {
mitelBackupWANServerIPAddr
IpAddress,
mitelBackupWANServerSubnetAddr
IpAddress,
mitelBackupWANServerPrimary
INTEGER,
mitelBackupWANServerStatus
RowStatus
}
mitelBackupWANServerIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the destination. It is used by
the Backup WAN Ethernet application to send monitoring
requests to. "
::= { mitelBackupWANServerEntry 1 }
mitelBackupWANServerSubnetAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet address of the destination. "
::= { mitelBackupWANServerEntry 2 }
mitelBackupWANServerPrimary OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether this server is primary. "
::= { mitelBackupWANServerEntry 3 }
mitelBackupWANServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current status of this entry. "
::= { mitelBackupWANServerEntry 4 }
END