1477 lines
51 KiB
Plaintext
1477 lines
51 KiB
Plaintext
-- ****************************************************************************
|
|
-- ****************************************************************************
|
|
-- Copyright(c) 2004 Mediatrix Telecom, Inc.
|
|
-- NOTICE:
|
|
-- This document contains information that is confidential and proprietary
|
|
-- to Mediatrix Telecom, Inc.
|
|
-- Mediatrix Telecom, Inc. reserves all rights to this document as well as
|
|
-- to the Intellectual Property of the document and the technology and
|
|
-- know-how that it includes and represents.
|
|
-- This publication cannot be reproduced, neither in whole nor in part in
|
|
-- any form whatsoever without written prior approval by
|
|
-- Mediatrix Telecom, Inc.
|
|
-- Mediatrix Telecom, Inc. reserves the right to revise this publication
|
|
-- and make changes at any time and without the obligation to notify any
|
|
-- person and/or entity of such revisions and/or changes.
|
|
-- ****************************************************************************
|
|
-- ****************************************************************************
|
|
|
|
MX-SIPPROXY-MIB
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MxEnableState,
|
|
MxActivationState,
|
|
MxIpHostName,
|
|
MxIpAddress,
|
|
MxIpPort,
|
|
MxAdvancedIpPort,
|
|
MxIpSubnetMask,
|
|
MxDigitMap
|
|
FROM MX-TC
|
|
MxUInt64,
|
|
MxFloat32,
|
|
MxIpHostNamePort,
|
|
MxIpAddr,
|
|
MxIpAddrPort,
|
|
MxIpAddrMask,
|
|
MxUri,
|
|
MxUrl
|
|
FROM MX-TC2
|
|
mediatrixServices
|
|
FROM MX-SMI2;
|
|
|
|
sipProxyMIB MODULE-IDENTITY
|
|
LAST-UPDATED "1910210000Z"
|
|
ORGANIZATION " Mediatrix Telecom, Inc. "
|
|
CONTACT-INFO " Mediatrix Telecom, Inc.
|
|
4229, Garlock Street
|
|
Sherbrooke (Quebec)
|
|
Canada
|
|
Phone: (819) 829-8749
|
|
"
|
|
DESCRIPTION " SIP Proxy
|
|
|
|
The SIP Proxy (SipProxy) service is used to add local
|
|
survivability for local endpoints and SIP phones.
|
|
"
|
|
::= { mediatrixServices 4600 }
|
|
|
|
sipProxyMIBObjects OBJECT IDENTIFIER ::= { sipProxyMIB 1 }
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Status Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
statusGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 100 }
|
|
-- Scalar:MonitoringState
|
|
|
|
monitoringState OBJECT-TYPE
|
|
SYNTAX INTEGER { destinationIsUp(100) , destinationIsDown(200) ,
|
|
inactive(300) , unknown(400) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " MonitoringState
|
|
|
|
Indicates the current monitoring status. A SIP server is
|
|
monitored to determine if it is usable. Monitoring is
|
|
performed through the SIP OPTIONS method.
|
|
|
|
* DestinationIsUp: The destination SIP server correctly
|
|
responds and is considered to be alive.
|
|
* DestinationIsDown: The destination SIP server fails to
|
|
correctly respond. The destination SIP server is
|
|
considered to be down.
|
|
* Inactive: The monitoring is not in use.
|
|
* Unknown: The initial response to monitoring has not yet
|
|
been received. This is the initial state when monitoring
|
|
is used.
|
|
|
|
"
|
|
::= { statusGroup 100 }
|
|
|
|
-- Scalar:ProxyStatus
|
|
|
|
proxyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { starting(100) , running(200) ,
|
|
runningInSurvivability(300) , stopping(400) ,
|
|
errorPortAlreadyInUse(500) ,
|
|
errorWaitingForTimeSynchronization(600) , errorInternal(700) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " ProxyStatus
|
|
|
|
The SipProxy service current status.
|
|
|
|
* Starting: The SIP proxy is starting: it cannot listen for
|
|
incoming SIP traffic or send SIP traffic.
|
|
* Running: The SIP proxy acts in transparent mode: it does
|
|
not respond to REGISTER requests and it transparently
|
|
forwards SIP messages to their normal routes. Registration
|
|
Throttling can be activated in that state.
|
|
* RunningInSurvivability: The SIP proxy acts in
|
|
survivability mode: it responds to REGISTER requests and
|
|
it routes SIP messages.
|
|
* Stopping: The SIP proxy is stopping: it cannot listen for
|
|
incoming SIP traffic or send SIP traffic.
|
|
* ErrorPortAlreadyInUse: The SIP proxy cannot open its IP
|
|
port because the port is already used by a SIP gateway.
|
|
* ErrorWaitingForTimeSynchronization: The SIP proxy is
|
|
started but it cannot open the SIP TLS port because the
|
|
real-time clock is not synchronised. This generally occurs
|
|
when the SNTP server is not set or is unreachable.
|
|
* ErrorInternal: The SIP proxy cannot start because of an
|
|
internal error. Refer to the release notes or contact a
|
|
technical support specialist.
|
|
|
|
"
|
|
::= { statusGroup 200 }
|
|
|
|
-- Scalar:Number of Active Calls
|
|
|
|
nbActiveCalls OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Number of Active Calls
|
|
|
|
The number of active calls currently handled by the SIP proxy.
|
|
|
|
The maximum number of active calls is platform-dependent.
|
|
|
|
"
|
|
::= { statusGroup 250 }
|
|
|
|
-- ***************************************************************************
|
|
|
|
-- Table:TLS Persistent Connection Status
|
|
|
|
-- ***************************************************************************
|
|
|
|
tlsPersistentConnectionStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TlsPersistentConnectionStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " TLS Persistent Connection Status
|
|
|
|
This table holds the status of the TLS persistent connections.
|
|
"
|
|
::= { statusGroup 300 }
|
|
tlsPersistentConnectionStatusEntry OBJECT-TYPE
|
|
SYNTAX TlsPersistentConnectionStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " A row in table TLS Persistent Connection Status. "
|
|
INDEX {
|
|
tlsPersistentConnectionStatusId
|
|
}
|
|
|
|
::= { tlsPersistentConnectionStatusTable 1 }
|
|
|
|
TlsPersistentConnectionStatusEntry ::= SEQUENCE
|
|
{
|
|
tlsPersistentConnectionStatusId Unsigned32,
|
|
tlsPersistentConnectionStatusLocalPort MxAdvancedIpPort,
|
|
tlsPersistentConnectionStatusRemoteHost OCTET STRING,
|
|
tlsPersistentConnectionStatusRemoteHostIpAddr OCTET STRING,
|
|
tlsPersistentConnectionStatusState INTEGER
|
|
}
|
|
|
|
-- Index:Index
|
|
|
|
tlsPersistentConnectionStatusId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Index
|
|
|
|
Unique identifier of the row.
|
|
"
|
|
::= { tlsPersistentConnectionStatusEntry 100 }
|
|
|
|
-- Columnar:Local Port
|
|
|
|
tlsPersistentConnectionStatusLocalPort OBJECT-TYPE
|
|
SYNTAX MxAdvancedIpPort
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Local Port
|
|
|
|
Local port used by the TLS persistent connection.
|
|
"
|
|
::= { tlsPersistentConnectionStatusEntry 300 }
|
|
|
|
-- Columnar:Remote Host
|
|
|
|
tlsPersistentConnectionStatusRemoteHost OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Remote Host
|
|
|
|
The remote host used to establish the TLS persistent
|
|
connection. The remote host can be a host name or an IP
|
|
address of the proxy, outbound proxy, or registrar.
|
|
"
|
|
::= { tlsPersistentConnectionStatusEntry 400 }
|
|
|
|
-- Columnar:Remote Host Ip Address
|
|
|
|
tlsPersistentConnectionStatusRemoteHostIpAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Remote Host Ip Address
|
|
|
|
The resolved IP address of the remote host used to establish
|
|
the TLS persistent connection.
|
|
"
|
|
::= { tlsPersistentConnectionStatusEntry 450 }
|
|
|
|
-- Columnar:State
|
|
|
|
tlsPersistentConnectionStatusState OBJECT-TYPE
|
|
SYNTAX INTEGER { up(100) , down(200) , waitingShutdown(300) ,
|
|
waitingUp(400) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " State
|
|
|
|
The current state of the TLS persistent connection.
|
|
|
|
* Up: The TLS connection is established and ready to be
|
|
used.
|
|
* Down: The TLS connection is not established.
|
|
* WaitingShutdown: The TLS connection is established but in
|
|
a graceful shutdown.
|
|
* WaitingUp: The TLS connection is established but not yet
|
|
ready to be used.
|
|
|
|
"
|
|
::= { tlsPersistentConnectionStatusEntry 500 }
|
|
|
|
-- End of table:TLS Persistent Connection Status
|
|
|
|
-- End of group:Status Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Proxy Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
proxyGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 200 }
|
|
-- Scalar:Survivability Mode
|
|
|
|
survivabilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER { automatic(100) , alwaysOn(200) , disabled(300) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Survivability Mode
|
|
|
|
Survivability mode executed by the SIP proxy.
|
|
|
|
* Automatic: The SIP proxy applies the normal survivability
|
|
strategy, i.e. it uses monitoring to determine if the SIP
|
|
server is up or down.
|
|
* AlwaysOn: The SIP proxy always acts as if the SIP server
|
|
is down. Useful for debugging.
|
|
* Disabled: The SIP proxy always acts as if the SIP server
|
|
is up. Useful for debugging.
|
|
|
|
Note that this parameter does not affect whether monitoring is
|
|
performed or not.
|
|
|
|
"
|
|
DEFVAL { automatic }
|
|
::= { proxyGroup 100 }
|
|
|
|
-- Scalar:Configuration Modified Status
|
|
|
|
configModifiedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { yes(100) , no(200) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Configuration Modified Status
|
|
|
|
Indicates that some configuration changes need the
|
|
ApplyConfiguration command to be executed in order to take
|
|
effect or to be validated. Restarting the service will also
|
|
apply these changes.
|
|
|
|
* Yes: The configuration has been modified but has not been
|
|
applied.
|
|
* No: The configuration has not been modified.
|
|
|
|
Use the ApplyConfiguration command to apply the configuration.
|
|
|
|
"
|
|
::= { proxyGroup 300 }
|
|
|
|
-- Scalar:Configuration Applied Status
|
|
|
|
configAppliedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { yes(100) , no(200) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Configuration Applied Status
|
|
|
|
Indicates that the configuration changes were applied or not.
|
|
|
|
* Yes: Configuration changes were applied successfully.
|
|
* No: Configuration changes not applied because of errors.
|
|
|
|
"
|
|
::= { proxyGroup 400 }
|
|
|
|
-- End of group:Proxy Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Network Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
networkGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 300 }
|
|
-- Scalar:Network Interface
|
|
|
|
networkInterface OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(1..50) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Network Interface
|
|
|
|
The network on which the SIP proxy listens for incoming SIP
|
|
traffic and sends SIP traffic.
|
|
"
|
|
DEFVAL { "Uplink" }
|
|
::= { networkGroup 100 }
|
|
|
|
-- Scalar:SIP Port
|
|
|
|
port OBJECT-TYPE
|
|
SYNTAX MxAdvancedIpPort
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " SIP Port
|
|
|
|
Port on which the SIP proxy listens for incoming unsecure SIP
|
|
traffic.
|
|
|
|
This is used only when UDP and/or TCP transports are enabled.
|
|
|
|
If set to 0, the unit uses the default SIP port.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { networkGroup 200 }
|
|
|
|
-- Scalar:SIP Secure Port
|
|
|
|
securePort OBJECT-TYPE
|
|
SYNTAX MxAdvancedIpPort
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " SIP Secure Port
|
|
|
|
Port on which the SIP proxy listens for incoming secure SIP
|
|
traffic.
|
|
|
|
This is used only when the TLS transport is enabled.
|
|
|
|
If set to 0, the unit uses the default SIP secure port.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { networkGroup 300 }
|
|
|
|
-- End of group:Network Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Register Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
registerGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 400 }
|
|
-- Scalar:Register Contact Override
|
|
|
|
contactOverrideEnable OBJECT-TYPE
|
|
SYNTAX MxEnableState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Register Contact Override
|
|
|
|
Defines if the SIP proxy should modify the Contact header of
|
|
REGISTER requests.
|
|
|
|
* Disabled: Act as a transparent proxy. Generally not
|
|
recommended in TLS.
|
|
* Enabled: Modify the Contact header of REGISTER requests
|
|
with the IP address and port of the proxy, so inbound
|
|
requests are routed back to the proxy. Also adds an alias
|
|
in the Contact URI for tracking purposes.
|
|
|
|
"
|
|
DEFVAL { enable }
|
|
::= { registerGroup 50 }
|
|
|
|
-- Scalar:Endpoint Survivability Expiration
|
|
|
|
endpointSurvivabilityExpiration OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 10..86400 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Endpoint Survivability Expiration
|
|
|
|
Configures the maximum registration expiration delay, i.e. the
|
|
EXPIRES value returned by the SIP proxy registrar in the 200
|
|
OK responses.
|
|
|
|
This value is expressed in seconds (s).
|
|
|
|
This parameter applies only when the survivability mode is
|
|
active, when the SIP proxy's internal registrar replies to the
|
|
REGISTER requests.
|
|
|
|
* If the value included in the REGISTER is lower or equal to
|
|
the value of this parameter, the value included in the
|
|
REGISTER is used.
|
|
* Otherwise, the value defined by the
|
|
EndpointSurvivabilityExpiration parameter is used.
|
|
|
|
Note: Using expiration values smaller than 32 seconds may
|
|
cause conflicts with the SIP retransmission timeouts. It is
|
|
not recommended to use expiration values smaller than 32
|
|
seconds unless the network environment requires very few
|
|
retransmissions or the retransmission timeouts of the devices
|
|
are set to short values.
|
|
|
|
"
|
|
DEFVAL { 90 }
|
|
::= { registerGroup 100 }
|
|
|
|
-- Scalar:Relayed Throttling Expiration
|
|
|
|
relayedThrottlingExpiration OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0..0 | 10..86400 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Relayed Throttling Expiration
|
|
|
|
Configures the expiration value in the REGISTERs relayed to
|
|
the external registrar when Registration Throttling is used.
|
|
|
|
This value is expressed in seconds (s).
|
|
|
|
A value of 0 has the effect proposing no expiration value to
|
|
the registrar during Registration Throttling. Any expiration
|
|
value present in the REGISTER is removed before relaying it to
|
|
the registrar.
|
|
|
|
The value of the RelayedThrottlingExpiration should be at
|
|
least twice the value of the EndpointThrottlingExpiration
|
|
parameter otherwise Registration Throttling is ineffective.
|
|
|
|
The expiration value returned by the registrar in the 200 OK
|
|
response always has precedence over the expiration value that
|
|
we propose in the REGISTER requests sent to the registrar
|
|
|
|
Note: Using expiration values smaller than 32 seconds may
|
|
cause conflicts with the SIP retransmission timeouts. It is
|
|
not recommended to use expiration values smaller than 32
|
|
seconds unless the network environment requires very few
|
|
retransmissions or the retransmission timeouts of the devices
|
|
are set to short values.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { registerGroup 200 }
|
|
|
|
-- Scalar:Endpoint Throttling Expiration
|
|
|
|
endpointThrottlingExpiration OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0..0 | 10..3600 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Endpoint Throttling Expiration
|
|
|
|
Configures the maximum registration expiration on the endpoint
|
|
side when Registration Throttling is used.
|
|
|
|
This value is expressed in seconds (s).
|
|
|
|
A value of 0 disables Registration Throttling.
|
|
|
|
The value of the RelayedThrottlingExpiration should be at
|
|
least twice the value of the EndpointThrottlingExpiration
|
|
parameter otherwise Registration Throttling is ineffective.
|
|
|
|
This parameter applies only when the Registration Throttling
|
|
replies to REGISTER requests.
|
|
|
|
* If the expiration value included in the REGISTER is lower
|
|
or equal to the value of this parameter, the value
|
|
included in the REGISTER is used.
|
|
* Otherwise, the value defined by the
|
|
EndpointThrottlingExpiration parameter is used.
|
|
* The expiration value returned by the registrar in the 200
|
|
OK has no impact on the expiration used on the endpoint
|
|
side.
|
|
|
|
Note: Using expiration values smaller than 32 seconds may
|
|
cause conflicts with the SIP retransmission timeouts. It is
|
|
not recommended to use expiration values smaller than 32
|
|
seconds unless the network environment requires very few
|
|
retransmissions or the retransmission timeouts of the devices
|
|
are set to short values.
|
|
|
|
"
|
|
DEFVAL { 120 }
|
|
::= { registerGroup 300 }
|
|
|
|
-- ***************************************************************************
|
|
|
|
-- Group:Registration Cache Group
|
|
|
|
-- ***************************************************************************
|
|
|
|
registrationCacheGroup OBJECT IDENTIFIER
|
|
::= { registerGroup 400 }
|
|
-- Scalar:Registration Cache Search Name
|
|
|
|
registrationCacheSearchName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Registration Cache Search Name
|
|
|
|
The name pattern to search in Aor and Contact from the
|
|
registration database used to populate the
|
|
RegistrationCacheSearchResult table when using the
|
|
SearchRegistration command.
|
|
"
|
|
::= { registrationCacheGroup 100 }
|
|
|
|
-- Scalar:Registration Cache Search Sort
|
|
|
|
registrationCacheSearchSort OBJECT-TYPE
|
|
SYNTAX INTEGER { aor(100) , contact(200) , receivedTime(300) ,
|
|
endpointExpiration(400) , registrarExpiration(500) , unsorted
|
|
(1000) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Registration Cache Search Sort
|
|
|
|
The sort order applied to RegistrationCacheSearchResult table
|
|
when using the SearchRegistration command.
|
|
|
|
* Aor: Address of record in the REGISTER.
|
|
* Contact: Contact in the REGISTER.
|
|
* ReceivedTime: Time at which the registration was received.
|
|
* EndpointExpiration: Time at which the endpoint-side
|
|
registration expires.
|
|
* RegistrarExpiration: Time at which the registrar-side
|
|
registration expires.
|
|
* Unsorted: Internal cache order.
|
|
|
|
"
|
|
DEFVAL { receivedTime }
|
|
::= { registrationCacheGroup 200 }
|
|
|
|
-- ***************************************************************************
|
|
|
|
-- Table:Registration Cache Search Result
|
|
|
|
-- ***************************************************************************
|
|
|
|
registrationCacheSearchResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RegistrationCacheSearchResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " Registration Cache Search Result
|
|
|
|
This table contains the registration cache entries filtered by
|
|
the SearchRegistrationCache command.
|
|
"
|
|
::= { registrationCacheGroup 300 }
|
|
registrationCacheSearchResultEntry OBJECT-TYPE
|
|
SYNTAX RegistrationCacheSearchResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " A row in table Registration Cache Search Result. "
|
|
INDEX {
|
|
registrationCacheSearchResultId
|
|
}
|
|
|
|
::= { registrationCacheSearchResultTable 1 }
|
|
|
|
RegistrationCacheSearchResultEntry ::= SEQUENCE
|
|
{
|
|
registrationCacheSearchResultId Unsigned32,
|
|
registrationCacheSearchResultAor OCTET STRING,
|
|
registrationCacheSearchResultContact OCTET STRING,
|
|
registrationCacheSearchResultReceivedTime OCTET STRING,
|
|
registrationCacheSearchResultEndpointExpiration OCTET STRING,
|
|
registrationCacheSearchResultRegistrarExpiration OCTET STRING,
|
|
registrationCacheSearchResultRegisteredTo INTEGER
|
|
}
|
|
|
|
-- Index:Id
|
|
|
|
registrationCacheSearchResultId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Id
|
|
|
|
Unique numerical identifier for a registration search result.
|
|
"
|
|
::= { registrationCacheSearchResultEntry 100 }
|
|
|
|
-- Columnar:Address of Record
|
|
|
|
registrationCacheSearchResultAor OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Address of Record
|
|
|
|
The Address of Record, in URI format, present in the
|
|
REGISTER.
|
|
|
|
For example: sip:alice@example.com
|
|
|
|
This value is taken from the REGISTER.
|
|
|
|
"
|
|
::= { registrationCacheSearchResultEntry 200 }
|
|
|
|
-- Columnar:
|
|
|
|
registrationCacheSearchResultContact OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
|
|
The Contact, in URI format, present in the REGISTER.
|
|
|
|
For example: sip:5551212@192.168.11.23:5060
|
|
|
|
This value is taken from the REGISTER.
|
|
|
|
"
|
|
::= { registrationCacheSearchResultEntry 300 }
|
|
|
|
-- Columnar:Received Time
|
|
|
|
registrationCacheSearchResultReceivedTime OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Received Time
|
|
|
|
Time at which the registration was received. Expressed as the
|
|
local time computed from the Time Zone defined in the
|
|
Hoc.StaticTimeZone parameter.
|
|
|
|
Format is DD/MM/YYYY hh:mm:ss
|
|
|
|
"
|
|
::= { registrationCacheSearchResultEntry 400 }
|
|
|
|
-- Columnar:Endpoint Expiration
|
|
|
|
registrationCacheSearchResultEndpointExpiration OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Endpoint Expiration
|
|
|
|
Time at which the registration expires on the endpoint side.
|
|
Expressed as a local time computed from the Time Zone defined
|
|
in the Hoc.StaticTimeZone parameter.
|
|
|
|
Format is DD/MM/YYYY hh:mm:ss
|
|
|
|
The expiration time of the endpoint side can differ from the
|
|
expiration time of the registrar side. This happens:
|
|
|
|
* if Registration Throttling is enabled and the expiration
|
|
delay is shorter on the endpoint side, or
|
|
* if the system is in survivability.
|
|
|
|
"
|
|
::= { registrationCacheSearchResultEntry 500 }
|
|
|
|
-- Columnar:RegistrarEndpoint Expiration
|
|
|
|
registrationCacheSearchResultRegistrarExpiration OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " RegistrarEndpoint Expiration
|
|
|
|
Time at which the registration expires on the registrar side.
|
|
Expressed as a local time computed from the Time Zone defined
|
|
in the Hoc.StaticTimeZone parameter.
|
|
|
|
Format is DD/MM/YYYY hh:mm:ss
|
|
|
|
The expiration time of the endpoint side can differ from the
|
|
expiration time of the registrar side. This happens:
|
|
|
|
* if Registration Throttling is enabled, where the
|
|
expiration delay is shorter on the endpoint side, or
|
|
* if the system is in survivability.
|
|
|
|
When the SipProxy service state switches to
|
|
RunningInSurvivability, all the registrations on the
|
|
registrar side are overridden at the time the switch
|
|
occurred. This ensures that endpoint registrations are
|
|
quickly refreshed on the registrar side after the system
|
|
exits from survivability mode.
|
|
|
|
"
|
|
::= { registrationCacheSearchResultEntry 550 }
|
|
|
|
-- Columnar:Registered To
|
|
|
|
registrationCacheSearchResultRegisteredTo OBJECT-TYPE
|
|
SYNTAX INTEGER { normal(100) , local(200) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Registered To
|
|
|
|
Registrar that handled the registration.
|
|
|
|
* Normal: The registration was forwarded to the normal
|
|
registrar.
|
|
* Local: The registration was handled by the local
|
|
registrar.
|
|
|
|
"
|
|
::= { registrationCacheSearchResultEntry 600 }
|
|
|
|
-- End of table:Registration Cache Search Result
|
|
|
|
-- Scalar:Total Registration Cache Count
|
|
|
|
totalRegistrationCacheCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Total Registration Cache Count
|
|
|
|
The total number of registrations cached by the SipProxy
|
|
service. This number also includes the registrations in
|
|
progress but not yet completed.
|
|
"
|
|
::= { registrationCacheGroup 400 }
|
|
|
|
-- End of group:Registration Cache Group
|
|
|
|
-- End of group:Register Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Monitoring Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
monitoringGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 500 }
|
|
-- Scalar:Monitoring Interval
|
|
|
|
monitoringInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0..3600 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Monitoring Interval
|
|
|
|
Interval at which monitoring requests are sent to verify the
|
|
SIP server status.
|
|
|
|
This value is expressed in seconds (s).
|
|
|
|
SIP OPTIONS are sent periodically to the monitored SIP server.
|
|
|
|
The SIP server is considered unreachable if one of these
|
|
conditions occurs:
|
|
|
|
* No response is received after the retransmission timer
|
|
expires (configurable via the
|
|
InteropRequestTransactionTimeout parameter).
|
|
* The response code received is listed in the
|
|
KeepAliveOptionErrorCodes parameter.
|
|
|
|
When the SIP server is considered unreachable, the
|
|
survivability mode enters its active state. Monitoring is
|
|
still performed when the SIP server is unreachable and as soon
|
|
as it becomes reachable again, the survivability mode becomes
|
|
inactive.
|
|
|
|
Setting this parameter to 0 disables the monitoring.
|
|
|
|
"
|
|
DEFVAL { 30 }
|
|
::= { monitoringGroup 100 }
|
|
|
|
-- Scalar:Monitoring Toggle Delay
|
|
|
|
monitoringToggleDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0..3600 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Monitoring Toggle Delay
|
|
|
|
Delay before reporting a status change of the monitored
|
|
destination.
|
|
|
|
This value is expressed in seconds (s).
|
|
|
|
Monitoring must succeed or fail for at least this duration to
|
|
conclude that the state of monitoring has changed (toggled).
|
|
|
|
Delay measurement is reset each time the result of a
|
|
monitoring attempt is obtained that reconfirms the current
|
|
state of monitoring.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { monitoringGroup 200 }
|
|
|
|
-- Scalar:Monitoring Destination
|
|
|
|
monitoringDestination OBJECT-TYPE
|
|
SYNTAX MxIpHostNamePort
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Monitoring Destination
|
|
|
|
Destination target. FQDN and port for a specific SIP proxy.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { monitoringGroup 300 }
|
|
|
|
-- Scalar:KeepAlive Option Error Codes
|
|
|
|
keepAliveOptionErrorCodes OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(0..255) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " KeepAlive Option Error Codes
|
|
|
|
Comma-separated list of response codes indicating that the SIP
|
|
server is down, when monitoring is performed through SIP
|
|
OPTIONS.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { monitoringGroup 400 }
|
|
|
|
-- End of group:Monitoring Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Option Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
optionGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 600 }
|
|
-- Scalar:SIP OPTIONS Method Support
|
|
|
|
sipOptionsMethodSupport OBJECT-TYPE
|
|
SYNTAX INTEGER { default(100) , acceptAll(200) , rejectAll(300) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " SIP OPTIONS Method Support
|
|
|
|
Determines the behaviour of the SIP proxy when answering a SIP
|
|
OPTIONS request.
|
|
|
|
* Default: The SIP proxy responds with a 200 OK only if the
|
|
SIP proxy is the destination of the OPTIONS request
|
|
regardless of the other content. If the SIP proxy is not
|
|
the destination, the OPTIONS request is forwarded.
|
|
* AcceptAll: The SIP proxy accepts all OPTIONS requests and
|
|
responds with a 200 OK, regardless of the content and
|
|
destination.
|
|
* RejectAll: The SIP proxy rejects all OPTIONS requests and
|
|
responds with an error 405 Method Not Allowed.
|
|
|
|
"
|
|
DEFVAL { default }
|
|
::= { optionGroup 100 }
|
|
|
|
-- End of group:Option Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Routing Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
routingGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 700 }
|
|
-- ***************************************************************************
|
|
|
|
-- Table:Route
|
|
|
|
-- ***************************************************************************
|
|
|
|
routeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " Route
|
|
|
|
This table contains the routes that can be applied by the SIP
|
|
proxy. Each table entry is a route. When a SIP request must be
|
|
routed, the table is searched in decreasing priority order to
|
|
find the first matching route. A route is selected when the
|
|
criteria defined by CriteriaType and CriteriaExpression
|
|
parameters matches.
|
|
|
|
"
|
|
::= { routingGroup 100 }
|
|
routeEntry OBJECT-TYPE
|
|
SYNTAX RouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " A row in table Route. "
|
|
INDEX {
|
|
routeId
|
|
}
|
|
|
|
::= { routeTable 1 }
|
|
|
|
RouteEntry ::= SEQUENCE
|
|
{
|
|
routeId Unsigned32,
|
|
routePriority Unsigned32,
|
|
routeCriteriaType INTEGER,
|
|
routeCriteriaExpression OCTET STRING,
|
|
routeTargetType INTEGER,
|
|
routeTargetUserTransformationName OCTET STRING,
|
|
routeRegisteredUserTransformationName OCTET STRING,
|
|
routeHardcodedHostPort MxIpHostNamePort,
|
|
routeConfigStatus INTEGER,
|
|
routeDelete INTEGER
|
|
}
|
|
|
|
-- Index:Id
|
|
|
|
routeId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Id
|
|
|
|
Unique numerical identifier for a routing rule.
|
|
"
|
|
::= { routeEntry 100 }
|
|
|
|
-- Columnar:Priority
|
|
|
|
routePriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Priority
|
|
|
|
Priority used to determine search order in the table when
|
|
routing is executed.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { routeEntry 200 }
|
|
|
|
-- Columnar:Configuration Status
|
|
|
|
routeConfigStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { valid(100) , priorityDuplicate(200) ,
|
|
missingHardcodedHostport(300) ,
|
|
inexistentTargetUserTransformation(400) ,
|
|
inexistentRegisteredUserTransformation(500) , invalid(600) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Configuration Status
|
|
|
|
Indicates if the configuration of this row is valid.
|
|
|
|
* Valid: The current content of the row is valid.
|
|
* PriorityDuplicate: Two or more entries have the same
|
|
priority.
|
|
* MissingHardcodedHostport: The TargetType parameter is set
|
|
to 'HardcodedHost' but the HardcodedHostPort parameter is
|
|
not configured.
|
|
* InexistentTargetUserTransformation: The
|
|
TargetUserTransformationName parameter refers to an
|
|
inexistent transformation.
|
|
* InexistentRegisteredUserTransformation: The
|
|
RegisteredUserTransformationName parameter refers to an
|
|
inexistent transformation.
|
|
* Invalid: The current content of the row is invalid.
|
|
|
|
"
|
|
::= { routeEntry 2000 }
|
|
|
|
-- Row command:Delete
|
|
|
|
routeDelete OBJECT-TYPE
|
|
SYNTAX INTEGER { noOp(0), delete(10) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Delete
|
|
|
|
Deletes this row.
|
|
"
|
|
DEFVAL { noOp }
|
|
::= { routeEntry 2100 }
|
|
|
|
-- Columnar:Criteria Type
|
|
|
|
routeCriteriaType OBJECT-TYPE
|
|
SYNTAX INTEGER { toUri(100) , toUser(200) , toHost(300) , contactUri
|
|
(400) , contactUser(500) , contactHost(600) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Criteria Type
|
|
|
|
Type of criteria used to match the routing rule against the
|
|
SIP message.
|
|
|
|
* ToUri: The full URI of the TO header.
|
|
* ToUser: The user part of the URI in the TO header.
|
|
* ToHost: The host part of the URI in the TO header.
|
|
* ContactUri: The full URI of the CONTACT header.
|
|
* ContactUser: The user part of the URI in the CONTACT
|
|
header.
|
|
* ContactHost: The host part of the URI in the CONTACT
|
|
header.
|
|
|
|
"
|
|
DEFVAL { toUser }
|
|
::= { routeEntry 300 }
|
|
|
|
-- Columnar:Expression Criteria
|
|
|
|
routeCriteriaExpression OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(0..255) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Expression Criteria
|
|
|
|
Regular expression compared with the value of the Criteria
|
|
Type found in the SIP message. If it matches, the route
|
|
defined by this table entry is used.
|
|
|
|
The regular expression is implicitly searched from the
|
|
beginning of the searched string. The regular expression must
|
|
not contain the begin string character (^).
|
|
|
|
The special syntax %gateway=gw_name% can be used to refer to
|
|
an internal gateway. The gw_name refers to the gateway name
|
|
as it appears in the SipEp.Gateway.Name parameter.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { routeEntry 400 }
|
|
|
|
-- Columnar:Target Type
|
|
|
|
routeTargetType OBJECT-TYPE
|
|
SYNTAX INTEGER { registeredAor(100) , registeredAorUser(200) ,
|
|
hardcodedHost(300) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Target Type
|
|
|
|
Type of target used by the route.
|
|
|
|
* RegisteredAor: Routing is based on the registration
|
|
database. Entries with an AOR matching the Request-URI
|
|
(R-URI) of the SIP request are looked up in the database.
|
|
Matching is based on the full AOR.
|
|
* RegisteredAorUser: Routing is based on the registration
|
|
database. Entries with an AOR matching the R-URI of the
|
|
SIP request are looked up in the database. Matching is
|
|
based on the user portion of the AOR.
|
|
* HardcodedHost: The SIP request is routed to the host
|
|
defined by the HardcodedHostPort parameter. The use of a
|
|
specific phone number can also be forced by using the
|
|
transformation specified by the
|
|
Route.TargetUserTransformationName parameter. When this
|
|
option is selected, the
|
|
Route.RegisteredUserTransformationName parameter is not
|
|
used.
|
|
|
|
"
|
|
DEFVAL { registeredAorUser }
|
|
::= { routeEntry 500 }
|
|
|
|
-- Columnar:Target User Transformation Name
|
|
|
|
routeTargetUserTransformationName OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(0..255) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Target User Transformation Name
|
|
|
|
Name of the transformation in the UserTransformations table.
|
|
This transformation is applied to the user part of the target
|
|
Request-URI (R-URI) in the SIP request. This transformation
|
|
allows modifying the user part of the R-URI in a SIP request
|
|
forwarded by the router. This parameter can be used to modify
|
|
a phone number: add/remove a regional code, add a prefix, add
|
|
a suffix, ...
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { routeEntry 600 }
|
|
|
|
-- Columnar:Registered User Transformation Name
|
|
|
|
routeRegisteredUserTransformationName OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(0..255) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Registered User Transformation Name
|
|
|
|
Name of a transformation in the UserTransformations table.
|
|
This transformation is used during the registration database
|
|
lookup, to normalise the database entries before checking for
|
|
matches. The transformation is applied to the user part of
|
|
the RegistrationStatus.Aor parameter. Only a copy of the
|
|
parameter is modified: this transformation does not modify
|
|
the content of the RegistrationStatus table.
|
|
|
|
This parameter is ignored when the Route.TargetType parameter
|
|
is set to 'HardcodedHost'.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { routeEntry 700 }
|
|
|
|
-- Columnar:Hardcoded Host and Port
|
|
|
|
routeHardcodedHostPort OBJECT-TYPE
|
|
SYNTAX MxIpHostNamePort
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Hardcoded Host and Port
|
|
|
|
Hardcoded host that can be used as a target in routes. The
|
|
host can be expressed as an IP address or a domain name. The
|
|
port is optional. A port value of 0 is interpreted as the
|
|
default port.
|
|
|
|
The special %gateway=gw_name% syntax can be used to refer to
|
|
an internal gateway. The gw_name refers to the gateway name
|
|
as it appears in the SipEp.Gateway.Name parameter.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { routeEntry 800 }
|
|
|
|
-- End of table:Route
|
|
|
|
-- ***************************************************************************
|
|
|
|
-- Table:User Transformations table
|
|
|
|
-- ***************************************************************************
|
|
|
|
userTransformationsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UserTransformationsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " User Transformations table
|
|
|
|
This table contains the transformations to be applied to a
|
|
user portion of a URI. The name and the criteria must match to
|
|
have the transformation applied. There can be multiple entries
|
|
with the same name. The entries are checked in decreasing
|
|
priority order and the first entry with matching name and
|
|
criteria is applied. If no matching entry is found, no
|
|
transformation is applied and the user stays unmodified.
|
|
"
|
|
::= { routingGroup 300 }
|
|
userTransformationsEntry OBJECT-TYPE
|
|
SYNTAX UserTransformationsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " A row in table User Transformations table. "
|
|
INDEX {
|
|
userTransformationsId
|
|
}
|
|
|
|
::= { userTransformationsTable 1 }
|
|
|
|
UserTransformationsEntry ::= SEQUENCE
|
|
{
|
|
userTransformationsId Unsigned32,
|
|
userTransformationsPriority Unsigned32,
|
|
userTransformationsName OCTET STRING,
|
|
userTransformationsCriteria OCTET STRING,
|
|
userTransformationsPattern OCTET STRING,
|
|
userTransformationsConfigStatus INTEGER,
|
|
userTransformationsDelete INTEGER
|
|
}
|
|
|
|
-- Index:Id
|
|
|
|
userTransformationsId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Id
|
|
|
|
Unique numerical identifier.
|
|
"
|
|
::= { userTransformationsEntry 100 }
|
|
|
|
-- Columnar:Priority
|
|
|
|
userTransformationsPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Priority
|
|
|
|
Priority used to determine search order in the table when
|
|
routing is executed. Search order is from lower to higher
|
|
priority values.
|
|
|
|
Entries with the same name must have different prioriry
|
|
values.
|
|
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { userTransformationsEntry 200 }
|
|
|
|
-- Columnar:Configuration Status
|
|
|
|
userTransformationsConfigStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { valid(100) , priorityDuplicate(200) , missingName
|
|
(300) , invalid(400) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Configuration Status
|
|
|
|
Indicates if the configuration of this row is valid.
|
|
|
|
* Valid: The current content of the row is valid.
|
|
* PriorityDuplicate: Two or more entries with the same name
|
|
have the same priority.
|
|
* MissingName: The entry must have a name.
|
|
* Invalid: The current content of the row is invalid.
|
|
|
|
"
|
|
::= { userTransformationsEntry 2000 }
|
|
|
|
-- Row command:Delete
|
|
|
|
userTransformationsDelete OBJECT-TYPE
|
|
SYNTAX INTEGER { noOp(0), delete(10) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Delete
|
|
|
|
Deletes this row.
|
|
"
|
|
DEFVAL { noOp }
|
|
::= { userTransformationsEntry 2100 }
|
|
|
|
-- Columnar:Transformation name
|
|
|
|
userTransformationsName OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(0..50) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Transformation name
|
|
|
|
The name of the transformation. There can be several
|
|
transformations of the same name. Must match values of
|
|
RegisteredUserTransformationName or UserTransformationName
|
|
parameters.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { userTransformationsEntry 300 }
|
|
|
|
-- Columnar:Transformation Criteria
|
|
|
|
userTransformationsCriteria OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(0..250) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Transformation Criteria
|
|
|
|
The criteria to be used in the transformation. If the
|
|
criteria does not match, the search in the table continues.
|
|
The criteria is a regular expression used for two things:
|
|
|
|
* Matching: If the expression matches, this transformation
|
|
is used. If it does not, the search continues for entries
|
|
with the same name in the table.
|
|
* Creating groups to be used as backreferences in the
|
|
pattern expression.
|
|
|
|
The regular expression is implicitly searched from the
|
|
beginning of the searched string: the begin string character
|
|
(^) must not be used in the regular expression.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { userTransformationsEntry 400 }
|
|
|
|
-- Columnar:Transformation Pattern
|
|
|
|
userTransformationsPattern OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE(0..250) )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Transformation Pattern
|
|
|
|
Pattern expression that creates the transformed value. Can
|
|
use backreferences to the groups created in the criteria.
|
|
"
|
|
DEFVAL { "" }
|
|
::= { userTransformationsEntry 500 }
|
|
|
|
-- End of table:User Transformations table
|
|
|
|
-- End of group:Routing Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Interop Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
interopGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 800 }
|
|
-- Scalar:Request Transaction Timeout
|
|
|
|
interopRequestTransactionTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 1..32 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Request Transaction Timeout
|
|
|
|
The transaction timeout for SIP requests. Corresponds to
|
|
timers B and F in RFC 3261.
|
|
|
|
This value applies to:
|
|
|
|
* all requests (INVITE as well as non-INVITE) relayed by the
|
|
SipProxy service, and
|
|
* the monitoring requests initiated by the SipProxy itself.
|
|
|
|
Setting this parameter to a relatively small value is useful
|
|
in cases where the SipProxy handles a request with an FQDN
|
|
that resolves to several targets. It gives time to try several
|
|
targets when the first target(s) do not respond.
|
|
|
|
Example: if this parameter is set to 5 seconds and the SIP
|
|
client that sent a request through the SipProxy has a
|
|
transaction timeout of 32 seconds, the SipProxy is able to try
|
|
about 6 targets before the transaction timer of the SIP client
|
|
expires.
|
|
|
|
This parameter is ignored if it has a value larger than the
|
|
value of the SipEp.InteropTransmissionTimeout parameter.
|
|
|
|
This value is expressed in seconds (s).
|
|
|
|
"
|
|
DEFVAL { 32 }
|
|
::= { interopGroup 100 }
|
|
|
|
-- End of group:Interop Group
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Notification Messages Configuration
|
|
|
|
-- ****************************************************************************
|
|
|
|
notificationsGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 60010 }
|
|
-- Scalar:Minimal Severity of Notification
|
|
|
|
minSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0) , debug(100) , info(200) , warning(300) ,
|
|
error(400) , critical (500) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Minimal Severity of Notification
|
|
|
|
Sets the minimal severity to issue a notification message
|
|
incoming from this service.
|
|
|
|
* Disable: No notification is issued.
|
|
* Debug: All notification messages are issued.
|
|
* Info: Notification messages with a 'Informational' and
|
|
higher severity are issued.
|
|
* Warning: Notification messages with a 'Warning' and higher
|
|
severity are issued.
|
|
* Error: Notification messages with an 'Error' and higher
|
|
severity are issued.
|
|
* Critical: Notification messages with a 'Critical' severity
|
|
are issued.
|
|
|
|
"
|
|
DEFVAL { warning }
|
|
::= { notificationsGroup 100 }
|
|
|
|
-- End of group:Notification Messages Configuration
|
|
|
|
-- ****************************************************************************
|
|
|
|
-- Group:Configuration Settings
|
|
|
|
-- ****************************************************************************
|
|
|
|
configurationGroup OBJECT IDENTIFIER
|
|
::= { sipProxyMIBObjects 60020 }
|
|
-- Scalar:Need Restart
|
|
|
|
needRestartInfo OBJECT-TYPE
|
|
SYNTAX INTEGER { no(0) , yes(100) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Need Restart
|
|
|
|
Indicates if the service needs to be restarted for the
|
|
configuration to fully take effect.
|
|
|
|
* Yes: Service needs to be restarted.
|
|
* No: Service does not need to be restarted.
|
|
|
|
Services can be restarted by using the
|
|
Scm.ServiceCommands.Restart command.
|
|
|
|
"
|
|
::= { configurationGroup 100 }
|
|
|
|
-- End of group:Configuration Settings
|
|
|
|
END
|