25655 lines
866 KiB
Plaintext
25655 lines
866 KiB
Plaintext
LCOS-SX-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString,MacAddress,TEXTUAL-CONVENTION,RowStatus FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
enterprises,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Unsigned32,Integer32,Counter32,Counter64,IpAddress FROM SNMPv2-SMI
|
|
-- PortList FROM Q-BRIDGE-MIB
|
|
dot1qTpFdbAddress, dot1qFdbId, dot1qTpFdbPort FROM Q-BRIDGE-MIB
|
|
InetAddress, InetAddressType FROM INET-ADDRESS-MIB
|
|
OwnerString FROM RMON-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
|
|
-- MacAddress FROM BRIDGE-MIB;
|
|
|
|
lcosSX MODULE-IDENTITY
|
|
LAST-UPDATED "201905310310Z"
|
|
ORGANIZATION "LANCOM Systems GmbH"
|
|
CONTACT-INFO
|
|
"
|
|
Adenauerstrasse 20 / B2
|
|
52146 Wuerselen
|
|
Germany
|
|
|
|
Phone: +49 (0)2405 49 93 6 0
|
|
Fax: +49 (0)2405 49 93 6 99
|
|
E-Mail: info@lancom.de"
|
|
DESCRIPTION
|
|
"Management information base definitions"
|
|
REVISION "201905310310Z"
|
|
DESCRIPTION
|
|
"Updated to fix bugs"
|
|
REVISION "201405300000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { enterprises lancom-systems(2356) 14 }
|
|
|
|
|
|
-- =======================================================================================================================
|
|
|
|
OperState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Oper state."
|
|
SYNTAX INTEGER { up ( 1 ) , down ( 2 ) }
|
|
|
|
AdminMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Admin state - default: disable(0)."
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
|
|
AdminMode2 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Admin state - default: disable(0)."
|
|
SYNTAX INTEGER { disable(0), enable(1), notSupported(2) }
|
|
|
|
ActivateCmd ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to activate commands. default: noAction(0). "
|
|
SYNTAX INTEGER { noAction ( 0 ),
|
|
activate ( 1 )
|
|
}
|
|
|
|
KeyType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key type specifying the key generated for frames received
|
|
on the port.
|
|
0 : Normal,
|
|
1 : Double Tag,
|
|
2 : IP Address,
|
|
3 : MAC and IP Address."
|
|
SYNTAX INTEGER { normal ( 0 ),
|
|
doubleTag ( 1 ),
|
|
ipAddr ( 2 ),
|
|
macAndIpAddr ( 3 )
|
|
}
|
|
|
|
FrameRate ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The values for frame rate"
|
|
SYNTAX INTEGER {
|
|
threeHundredFramesPerSec (0),
|
|
oneHundredFramesPerSec (1),
|
|
tenFramesPerSec (2),
|
|
oneFramePerSec (3),
|
|
sixFramesPerMin (4),
|
|
oneFramePerMin (5),
|
|
sixFramesPerHour (6)
|
|
}
|
|
|
|
DayOfWeek ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to set the days of the week."
|
|
SYNTAX INTEGER {mon(1),tue(2),wed(3),thur(4),
|
|
fri(5),sat(6),sun(7) }
|
|
|
|
Month ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to set the month."
|
|
SYNTAX INTEGER {jan(1),feb(2),march(3),april(4),
|
|
may(5),june(6),july(7),aug(8),
|
|
sept(9),oct(10),nov(11),dec(12)}
|
|
|
|
SNMPv3SecurityLevel ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 USM security levels."
|
|
SYNTAX INTEGER {
|
|
noAuthNoPriv(1),
|
|
authNoPriv(2),
|
|
authPriv(3)
|
|
}
|
|
|
|
SNMPv3AuthenticationProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 USM authentication protocol values."
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
md5(1),
|
|
sha1(2),
|
|
sha224(3),
|
|
sha256(4),
|
|
sha384(5),
|
|
sha512(6)
|
|
}
|
|
|
|
SNMPv3PrivacyProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 USM privacy protocol values."
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
des(1),
|
|
aes128(2),
|
|
aes192(3),
|
|
aes256(4)
|
|
}
|
|
|
|
|
|
-- =======================================================================================================================
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.1
|
|
lcsSystem OBJECT IDENTIFIER ::= { lcosSX 1 }
|
|
|
|
-- =======================================================================================================================
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.1.1
|
|
lcsSystemInformation OBJECT IDENTIFIER ::= { lcsSystem 1 }
|
|
|
|
lcsSystemInfo OBJECT IDENTIFIER ::= { lcsSystemInformation 1 }
|
|
|
|
lcsSystemInfoModelName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 2 }
|
|
|
|
lcsSystemInfoSystemDescript OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 3 }
|
|
|
|
lcsSystemInfoLocation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 4 }
|
|
|
|
lcsSystemInfoContact OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 5 }
|
|
|
|
lcsSystemInfoSystemName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 6 }
|
|
|
|
lcsSystemInfoSystemDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 7 }
|
|
|
|
lcsSystemInfoSystemUptime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 8 }
|
|
|
|
lcsSystemInfoBootloaderVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 9 }
|
|
|
|
lcsSystemInfoFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 10 }
|
|
|
|
lcsSystemInfoHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 11 }
|
|
|
|
lcsSystemInfoMechanicalVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 12 }
|
|
|
|
lcsSystemInfoSeriesNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 13 }
|
|
|
|
lcsSystemInfoHostMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 14 }
|
|
|
|
lcsSystemInfoMemory OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 15 }
|
|
|
|
lcsSystemInfoFlash OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 16 }
|
|
|
|
lcsSystemInfoFanSpeed OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fan Speed"
|
|
::= { lcsSystemInfo 17 }
|
|
|
|
-- lcsSystemInfoPowerStatus OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsSystemInfo 19 }
|
|
|
|
-- lcsSystemInfoPowers OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsSystemInfo 20 }
|
|
|
|
-- lcsSystemInfoTemperatureStatus OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsSystemInfo 21 }
|
|
|
|
lcsSystemInfoTemperature1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 22 }
|
|
|
|
lcsSystemInfoTemperature2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 23 }
|
|
|
|
lcsSystemInfoCPULoad OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU Utilization."
|
|
::= { lcsSystemInfo 24 }
|
|
|
|
lcsSystemInfoProductionDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Production Date."
|
|
::= { lcsSystemInfo 33 }
|
|
|
|
lcsSystemInfoTemperature3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSystemInfo 34 }
|
|
|
|
lcsSystemInfoPhysicalPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of physical Ports"
|
|
::= { lcsSystemInfo 200 }
|
|
|
|
lcsSystemInfoTemperatureSensor1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature sensor 1 in degrees Celsius"
|
|
::= { lcsSystemInfo 201 }
|
|
|
|
lcsSystemInfoTemperatureSensor2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature sensor 2 in degrees Celsius"
|
|
::= { lcsSystemInfo 202 }
|
|
|
|
lcsSystemInfoTemperatureSensor3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature sensor 3 in degrees Celsius"
|
|
::= { lcsSystemInfo 203 }
|
|
|
|
|
|
lcsPowerInformation OBJECT IDENTIFIER ::= { lcsSystemInformation 2 }
|
|
|
|
lcsPowerInfoDetectedPSUA OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is the power supply unit present. "
|
|
::= {lcsPowerInformation 2 }
|
|
|
|
lcsPowerInfoDetectedPSUB OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is the power supply unit present. "
|
|
::= {lcsPowerInformation 3 }
|
|
|
|
lcsPowerInfoPSUStatusA OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of power supply unit. "
|
|
::= {lcsPowerInformation 4 }
|
|
|
|
lcsPowerInfoPSUStatusB OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of power supply unit. "
|
|
::= {lcsPowerInformation 5 }
|
|
|
|
lcsPowerInfoFANSpeedA OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fan speed of power supply unit. "
|
|
::= {lcsPowerInformation 6 }
|
|
|
|
lcsPowerInfoFANSpeedB OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fan speed of power supply unit. "
|
|
::= {lcsPowerInformation 7 }
|
|
|
|
lcsPowerInfoTemperatureA OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature of power supply unit. "
|
|
::= {lcsPowerInformation 8 }
|
|
|
|
lcsPowerInfoTemperatureB OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The temperature of power supply unit. "
|
|
::= {lcsPowerInformation 9 }
|
|
|
|
lcsPowerInfoOperatingMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operating mode of power supply unit.
|
|
0:Boost
|
|
1:Redundant"
|
|
::= {lcsPowerInformation 10 }
|
|
|
|
|
|
lcsSystemTimeConf OBJECT IDENTIFIER ::= { lcsSystem 2 }
|
|
|
|
-- lcsSystemNTP OBJECT IDENTIFIER ::= { lcsSystemTimeConf 1 }
|
|
|
|
lcsSystemTime OBJECT IDENTIFIER ::= { lcsSystemTimeConf 2 }
|
|
lcsSystemTimeZone OBJECT IDENTIFIER ::= { lcsSystemTime 1 }
|
|
lcsSystemTimeDaylightSaving OBJECT IDENTIFIER ::= { lcsSystemTime 2 }
|
|
lcsSystemTimeConfiguration OBJECT IDENTIFIER ::= { lcsSystemTime 3 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Objects in the lcsSystemNTP Group
|
|
-- =======================================================================================================================
|
|
-- lcsSystemNTPMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {useLocal(0),useNTP(1)}
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The system NTP Mode.
|
|
-- useLocal(0) : Use Local Settings,
|
|
-- useNTP(1) : Use NTP Server."
|
|
-- DEFVAL { useLocal }
|
|
-- ::= { lcsSystemNTP 1 }
|
|
--
|
|
-- lcsSystemNTPServer1 OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Get/Set the NTP Time Server1.
|
|
-- You can use the IP address or domain name."
|
|
-- ::= { lcsSystemNTP 2 }
|
|
--
|
|
-- lcsSystemNTPServer2 OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Get/Set the NTP Time Server2.
|
|
-- You can use the IP address or domain name."
|
|
-- ::= { lcsSystemNTP 3 }
|
|
--
|
|
-- lcsSystemNTPServer3 OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Get/Set the NTP Time Server3.
|
|
-- You can use the IP address or domain name."
|
|
-- ::= { lcsSystemNTP 4 }
|
|
--
|
|
-- lcsSystemNTPServer4 OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Get/Set the NTP Time Server4.
|
|
-- You can use the IP address or domain name."
|
|
-- ::= { lcsSystemNTP 5 }
|
|
--
|
|
-- lcsSystemNTPServer5 OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Get/Set the NTP Time Server5.
|
|
-- You can use the IP address or domain name."
|
|
-- ::= { lcsSystemNTP 6 }
|
|
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Objects in the lcsSystemTime Group
|
|
-- =======================================================================================================================
|
|
--lcsSystemTimeZone
|
|
|
|
lcsSystemTimeZoneConf OBJECT-TYPE
|
|
SYNTAX Integer32(-7200..7201)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the NTP Time Zone.
|
|
The value range is between -7200 and 7201 (minutes).
|
|
0 : None.
|
|
-7200 : (GMT-12:00).
|
|
-6600 : (GMT-11:00).
|
|
-6000 : (GMT-10:00).
|
|
-5400 : (GMT-09:00).
|
|
-4800 : (GMT-08:00)Pacific Time.
|
|
-4801 : (GMT-08:00)Tijuana, Baja California.
|
|
-4200 : (GMT-07:00)Arizona.
|
|
-4201 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - New.
|
|
-4202 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - Old.
|
|
-4203 : (GMT-07:00)Mountain Time.
|
|
-3600 : (GMT-06:00)Central America.
|
|
-3601 : (GMT-06:00)Central Time.
|
|
-3602 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - New.
|
|
-3603 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - Old.
|
|
-3604 : (GMT-06:00)Saskatchewan.
|
|
-3000 : (GMT-05:00)Bogota, Lima, Quito, Rio Branco.
|
|
-3001 : (GMT-05:00)Eastern Time.
|
|
-3002 : (GMT-05:00)Indiana.
|
|
-2700 : (GMT-04:30).
|
|
-2400 : (GMT-04:00)Atlantic Time.
|
|
-2401 : (GMT-04:00)La Paz.
|
|
-2402 : (GMT-04:00)Manaus.
|
|
-2403 : (GMT-04:00)Santiago.
|
|
-2100 : (GMT-03:30).
|
|
-1800 : (GMT-03:00)Brasilia.
|
|
-1801 : (GMT-03:00)Buenos Aires.
|
|
-1802 : (GMT-03:00)Georgetown.
|
|
-1803 : (GMT-03:00)Greenland.
|
|
-1804 : (GMT-03:00)Montevideo.
|
|
-1805 : (GMT-02:00).
|
|
-600 : (GMT-01:00)Azores.
|
|
-601 : (GMT-01:00)Cape Verde Is.
|
|
1 : (GMT) Casablanca.
|
|
2 : (GMT) Greenwich Mean Time.
|
|
3 : (GMT) Monrovia, Reykjavik.
|
|
600 : (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna.
|
|
601 : (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague.
|
|
602 : (GMT+01:00) Brussels, Copenhagen, Madrid, Paris.
|
|
603 : (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb.
|
|
604 : (GMT+01:00) West Central Africa.
|
|
1200 : (GMT+02:00) Amman.
|
|
1201 : (GMT+02:00) Athens, Bucharest, Istanbul.
|
|
1202 : (GMT+02:00) Beirut.
|
|
1203 : (GMT+02:00) Cairo.
|
|
1204 : (GMT+02:00) Harare, Pretoria.
|
|
1205 : (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius.
|
|
1206 : (GMT+02:00) Jerusalem.
|
|
1207 : (GMT+02:00) Minsk.
|
|
1208 : (GMT+02:00) Windhoek.
|
|
1800 : (GMT+03:00) Baghdad.
|
|
1801 : (GMT+03:00) Kuwait, Riyadh.
|
|
1802 : (GMT+03:00) Moscow, St. Petersburg, Volgograd.
|
|
1803 : (GMT+03:00) Nairobi.
|
|
1804 : (GMT+03:00) Tbilisi.
|
|
2100 : (GMT+03:30) Tehran.
|
|
2400 : (GMT+04:00) Abu Dhabi, Muscat.
|
|
2401 : (GMT+04:00) Baku.
|
|
2402 : (GMT+04:00) Caucasus Standard Time.
|
|
2403 : (GMT+04:00) Port Louis.
|
|
2404 : (GMT+04:00) Yerevan.
|
|
2700 : (GMT+04:30) Kabul.
|
|
3000 : (GMT+05:00) Ekaterinburg.
|
|
3001 : (GMT+05:00) Islamabad, Karachi.
|
|
3002 : (GMT+05:00) Tashkent.
|
|
3300 : (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi.
|
|
3301 : (GMT+05:30) Sri Jayawardenepura.
|
|
3455 : (GMT+05:45) Kathmandu.
|
|
3600 : (GMT+06:00) Almaty, Novosibirsk.
|
|
3601 : (GMT+06:00) Astana, Dhaka.
|
|
3600 : (GMT+06:30) Yangon (Rangoon).
|
|
4200 : (GMT+07:00) Bangkok, Hanoi, Jakarta.
|
|
4201 : (GMT+07:00) Krasnoyarsk.
|
|
4800 : (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi.
|
|
4801 : (GMT+08:00) Irkutsk, Ulaan Bataar.
|
|
4802 : (GMT+08:00) Kuala Lumpur, Singapore.
|
|
4803 : (GMT+08:00) Perth.
|
|
4804 : (GMT+08:00) Taipei.
|
|
5400 : (GMT+09:00) Osaka, Sapporo, Tokyo.
|
|
5401 : (GMT+09:00) Seoul.
|
|
5402 : (GMT+09:00) Yakutsk.
|
|
5700 : (GMT+09:30) Adelaide.
|
|
5701 : (GMT+09:30) Darwin.
|
|
6000 : (GMT+10:00) Brisbane.
|
|
6001 : (GMT+10:00) Canberra, Melbourne, Sydney.
|
|
6002 : (GMT+10:00) Guam, Port Moresby.
|
|
6003 : (GMT+10:00) Hobart.
|
|
6004 : (GMT+10:00) Vladivostok.
|
|
6600 : (GMT+11:00) Magadan, Solomon Is., New Caledonia.
|
|
7200 : (GMT+12:00) Auckland, Wellington.
|
|
7201 : (GMT+12:00) Fiji, Kamchatka, Marshall Is."
|
|
::= { lcsSystemTimeZone 1 }
|
|
|
|
lcsSystemTimeZoneAcronym OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Acronym - User can set the acronym of the time zone.
|
|
This is a User configurable acronym to identify the time zone.
|
|
Range : 0 - 16 characters."
|
|
::= { lcsSystemTimeZone 2 }
|
|
|
|
--lcsSystemTimeDaylightSaving
|
|
|
|
lcsSystemTimeDaylightSavingMode OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), recurring(1), nonRecurring(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system Daylight Savings Mode.
|
|
disable(0) : Disable.
|
|
recurring(1) : Recurring
|
|
- configure the Daylight Saving Time duration
|
|
to repeat the configuration every year.
|
|
nonRecurring(2): Non-Recurring - configure the Daylight Saving Time
|
|
duration for single time configuration."
|
|
DEFVAL { disable }
|
|
::= { lcsSystemTimeDaylightSaving 1 }
|
|
|
|
lcsSystemTimeDaylightSavingStartWeek OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start time Week. Use in Recurring Mode.
|
|
Range : first,2,3,4,last.
|
|
Default : first."
|
|
::= { lcsSystemTimeDaylightSaving 2 }
|
|
|
|
lcsSystemTimeDaylightSavingStartDay OBJECT-TYPE
|
|
SYNTAX DayOfWeek
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start time Day. Use in Recurring Mode."
|
|
DEFVAL { mon }
|
|
::= { lcsSystemTimeDaylightSaving 3 }
|
|
|
|
lcsSystemTimeDaylightSavingStartMonth OBJECT-TYPE
|
|
SYNTAX Month
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start time Month."
|
|
DEFVAL { jan }
|
|
::= { lcsSystemTimeDaylightSaving 4 }
|
|
|
|
lcsSystemTimeDaylightSavingStartDate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start time Date. Use in Non-Recurring Mode.
|
|
Range : 1 - 31.
|
|
Default : 1."
|
|
::= { lcsSystemTimeDaylightSaving 5 }
|
|
|
|
lcsSystemTimeDaylightSavingStartYear OBJECT-TYPE
|
|
SYNTAX Integer32 (2000..2097)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start time Year. Use in Non-Recurring Mode.
|
|
Range : 2000 - 2097.
|
|
Default : 2000."
|
|
::= { lcsSystemTimeDaylightSaving 6 }
|
|
|
|
lcsSystemTimeDaylightSavingStartHours OBJECT-TYPE
|
|
SYNTAX Integer32 (0..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start time Hours.
|
|
Range : 0 - 23.
|
|
Default : 0."
|
|
::= { lcsSystemTimeDaylightSaving 7 }
|
|
|
|
lcsSystemTimeDaylightSavingStartMinutes OBJECT-TYPE
|
|
SYNTAX Integer32 (0..59)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start time Minutes.
|
|
Range : 0 - 59.
|
|
Default : 0."
|
|
::= { lcsSystemTimeDaylightSaving 8 }
|
|
|
|
lcsSystemTimeDaylightSavingEndWeek OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End time Week. Use in Recurring Mode.
|
|
Range : first,2,3,4,last.
|
|
Default : first."
|
|
::= { lcsSystemTimeDaylightSaving 9 }
|
|
|
|
lcsSystemTimeDaylightSavingEndDay OBJECT-TYPE
|
|
SYNTAX DayOfWeek
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End time Day. Use in Recurring Mode."
|
|
DEFVAL { mon }
|
|
::= { lcsSystemTimeDaylightSaving 10 }
|
|
|
|
lcsSystemTimeDaylightSavingEndMonth OBJECT-TYPE
|
|
SYNTAX Month
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End time Month."
|
|
DEFVAL { jan }
|
|
::= { lcsSystemTimeDaylightSaving 11 }
|
|
|
|
lcsSystemTimeDaylightSavingEndDate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..31)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End time Date. Use in Non-Recurring Mode.
|
|
Range : 1 - 31.
|
|
Default : 1."
|
|
::= { lcsSystemTimeDaylightSaving 12 }
|
|
|
|
lcsSystemTimeDaylightSavingEndYear OBJECT-TYPE
|
|
SYNTAX Integer32 (2000..2097)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End time Year. Use in Non-Recurring Mode.
|
|
Range : 2000 - 2097.
|
|
Default : 2000."
|
|
::= { lcsSystemTimeDaylightSaving 13 }
|
|
|
|
lcsSystemTimeDaylightSavingEndHours OBJECT-TYPE
|
|
SYNTAX Integer32 (0..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End time Hours.
|
|
Range : 0 - 23.
|
|
Default : 0."
|
|
::= { lcsSystemTimeDaylightSaving 14 }
|
|
|
|
lcsSystemTimeDaylightSavingEndMinutes OBJECT-TYPE
|
|
SYNTAX Integer32 (0..59)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End time Minutes.
|
|
Range : 0 - 59.
|
|
Default : 0."
|
|
::= { lcsSystemTimeDaylightSaving 15 }
|
|
|
|
lcsSystemTimeDaylightSavingOffset OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Offset - the number of minutes to add during Daylight Saving Time.
|
|
Range : 1 - 1440(Minutes).
|
|
Default : 1."
|
|
::= { lcsSystemTimeDaylightSaving 16 }
|
|
|
|
lcsSystemTimeConfigurationClockSource OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Use Local Settings.
|
|
1:Use NTP Server."
|
|
::= { lcsSystemTimeConfiguration 1}
|
|
|
|
lcsSystemTimeConfigurationSystemDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System date. Default format:yyyy-mm-dd.
|
|
When ClockSource is Use Local Settings, you can set this field."
|
|
::= { lcsSystemTimeConfiguration 2}
|
|
|
|
lcsSystemTimeConfigurationDateFormat OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1|2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date format of the system.
|
|
0:yyyy-mm-dd
|
|
1:mm-dd-yyyy
|
|
2:dd-mm-yyyy"
|
|
::= { lcsSystemTimeConfiguration 3}
|
|
|
|
lcsSystemTimeConfigurationTimeFormat OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time format of the system.
|
|
0:24-hr, format:hh:mm:ss
|
|
1:12-hr, format:hh:mm:ss am/pm"
|
|
::= { lcsSystemTimeConfiguration 4}
|
|
|
|
lcsSystemTimeConfigurationSystemTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System date.
|
|
24-hr, format:hh:mm:ss
|
|
12-hr, format:hh:mm:ss am/pm
|
|
When ClockSource is Use Local Settings, you can set this field."
|
|
::= { lcsSystemTimeConfiguration 5}
|
|
|
|
-- =======================================================================================================================
|
|
lcsSystemAccount OBJECT IDENTIFIER ::= { lcsSystem 3 }
|
|
|
|
lcsSystemAccountUsers OBJECT IDENTIFIER ::= { lcsSystemAccount 1 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsUserConfig group
|
|
-- =======================================================================================================================
|
|
--lcsUserConfigTable
|
|
|
|
lcsUserConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSUserConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The User Config Table. "
|
|
::= { lcsSystemAccountUsers 1 }
|
|
|
|
lcsUserConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSUserConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The User Config Entry."
|
|
INDEX { lcsUserConfigIndex }
|
|
::= { lcsUserConfigTable 1 }
|
|
|
|
LCSUserConfigEntry ::= SEQUENCE {
|
|
lcsUserConfigIndex Integer32,
|
|
lcsUserConfigUserName DisplayString,
|
|
lcsUserConfigPassword DisplayString,
|
|
lcsUserConfigPrivilegeLevel Integer32,
|
|
lcsUserConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsUserConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user Config Index. "
|
|
::= { lcsUserConfigEntry 1 }
|
|
|
|
lcsUserConfigUserName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string identifying the user name for the entry.
|
|
string length: 1-31. "
|
|
::= { lcsUserConfigEntry 2 }
|
|
|
|
lcsUserConfigPassword OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password of the user.
|
|
string length: 0-31. "
|
|
::= { lcsUserConfigEntry 3 }
|
|
|
|
lcsUserConfigPrivilegeLevel OBJECT-TYPE
|
|
SYNTAX Integer32(1..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privilege level of the user.If the privilege level
|
|
value is 15, it can access all groups.range: 1-15. "
|
|
::= { lcsUserConfigEntry 4 }
|
|
|
|
lcsUserConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is used
|
|
to create/delete entries. Any object in an entry of this
|
|
table may be modified while the value of the corresponding
|
|
instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsUserConfigEntry 5 }
|
|
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsPrivilegeLevelConfig group
|
|
-- =======================================================================================================================
|
|
--lcsPrivilegeLevelConfigTable
|
|
|
|
lcsPrivilegeLevelConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPrivilegeLevelConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Privilege Level Config Table. "
|
|
::= { lcsSystemAccountUsers 2 }
|
|
|
|
lcsPrivilegeLevelConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSPrivilegeLevelConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Privilege Level Config Entry."
|
|
INDEX { lcsPrivilegeLevelIndex }
|
|
::= { lcsPrivilegeLevelConfigTable 1 }
|
|
|
|
LCSPrivilegeLevelConfigEntry ::= SEQUENCE {
|
|
lcsPrivilegeLevelIndex Integer32,
|
|
lcsPrivilegeLevelGroupName DisplayString,
|
|
lcsPrivilegeLevelConfigReadOnly Integer32,
|
|
lcsPrivilegeLevelConfigReadWrite Integer32,
|
|
lcsPrivilegeLevelStatusReadOnly Integer32,
|
|
lcsPrivilegeLevelStatusReadWrite Integer32
|
|
}
|
|
|
|
lcsPrivilegeLevelIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Privilege Level Index. "
|
|
::= { lcsPrivilegeLevelConfigEntry 1 }
|
|
|
|
lcsPrivilegeLevelGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name identifying the privilege group."
|
|
::= { lcsPrivilegeLevelConfigEntry 2 }
|
|
|
|
lcsPrivilegeLevelConfigReadOnly OBJECT-TYPE
|
|
SYNTAX Integer32(1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privilege level of configuration read-only.If the
|
|
privilege level value is 15,it can access all groups.
|
|
range: 1-15. "
|
|
::= { lcsPrivilegeLevelConfigEntry 3 }
|
|
|
|
lcsPrivilegeLevelConfigReadWrite OBJECT-TYPE
|
|
SYNTAX Integer32(1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privilege level of configuration/execute read/write.
|
|
If the privilege level value is 15,it can access all groups.
|
|
range: 1-15. "
|
|
::= { lcsPrivilegeLevelConfigEntry 4 }
|
|
|
|
lcsPrivilegeLevelStatusReadOnly OBJECT-TYPE
|
|
SYNTAX Integer32(1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privilege level of status/statistics read-only.
|
|
If the privilege level value is 15,it can access all groups.
|
|
range: 1-15. "
|
|
::= { lcsPrivilegeLevelConfigEntry 5 }
|
|
|
|
lcsPrivilegeLevelStatusReadWrite OBJECT-TYPE
|
|
SYNTAX Integer32(1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The privilege level of status/statistics read-write.
|
|
If the privilege level value is 15,it can access all groups.
|
|
range: 1-15. "
|
|
::= { lcsPrivilegeLevelConfigEntry 6 }
|
|
|
|
lcsSystemAccountSuperUserPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Encrypted admin password"
|
|
::= { lcsSystemAccountUsers 1500 }
|
|
|
|
lcsSystemAccountSuperUserPasswordUnhashed OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin password
|
|
This object will return an empty string even if a password is set."
|
|
::= { lcsSystemAccountUsers 1501 }
|
|
|
|
lcsSystemAccountEnforcePasswordRules OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enforce the password policies or not."
|
|
::= { lcsSystemAccountUsers 1502 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsIP OBJECT IDENTIFIER ::= { lcsSystem 4 }
|
|
|
|
lcsIPConfigurationBasic OBJECT IDENTIFIER ::= { lcsIP 1 }
|
|
|
|
lcsIPConfigIPv4DHCPClientEnable OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 DHCP Client Enabled
|
|
0: Disable
|
|
1: Enable"
|
|
::= {lcsIPConfigurationBasic 1 }
|
|
|
|
lcsIPConfigIPv4Address OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 Address."
|
|
::= {lcsIPConfigurationBasic 2 }
|
|
|
|
lcsIPConfigSubnetMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 SubnetMask."
|
|
::= {lcsIPConfigurationBasic 3 }
|
|
|
|
lcsIPConfigGateway OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 Gateway."
|
|
::= {lcsIPConfigurationBasic 4 }
|
|
|
|
lcsIPConfigDNSServer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Server Source.
|
|
0: No DNS configuration is applied
|
|
1: DNS configuration is manually set
|
|
2: DNS configuration is derived from DHCPv4
|
|
3: DNS configuration is derived from DHCPv4 on specific VLAN.
|
|
4. DNS configuration is derived from DHCPv6.
|
|
5. DNS configuration is derived from DHCPv6 on specific VLAN.
|
|
"
|
|
::= {lcsIPConfigurationBasic 5 }
|
|
|
|
lcsIPConfigDNSServerValue OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS IPv4 Address or VLAN value."
|
|
::= {lcsIPConfigurationBasic 6 }
|
|
|
|
lcsIPConfiguration OBJECT IDENTIFIER ::= { lcsIP 2 }
|
|
|
|
lcsMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Configuration Mode.
|
|
default:0
|
|
0: Host
|
|
1: Router"
|
|
::= {lcsIPConfiguration 2 }
|
|
|
|
lcsDNSServerSource1 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Server Source.
|
|
0: No DNS configuration is applied
|
|
1: DNS configuration is manually set
|
|
2: DNS configuration is derived from DHCPv4
|
|
3: DNS configuration is derived from DHCPv4 on specific VLAN.
|
|
4. DNS configuration is derived from DHCPv6.
|
|
5. DNS configuration is derived from DHCPv6 on specific VLAN.
|
|
"
|
|
::= {lcsIPConfiguration 3 }
|
|
|
|
lcsDNSServerSource2 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Server Source.
|
|
0: No DNS configuration is applied
|
|
1: DNS configuration is manually set
|
|
2: DNS configuration is derived from DHCPv4
|
|
3: DNS configuration is derived from DHCPv4 on specific VLAN.
|
|
4. DNS configuration is derived from DHCPv6.
|
|
5. DNS configuration is derived from DHCPv6 on specific VLAN.
|
|
"
|
|
::= {lcsIPConfiguration 4 }
|
|
|
|
lcsDNSServerSource3 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Server Source.
|
|
0: No DNS configuration is applied
|
|
1: DNS configuration is manually set
|
|
2: DNS configuration is derived from DHCPv4
|
|
3: DNS configuration is derived from DHCPv4 on specific VLAN.
|
|
4: DNS configuration is derived from DHCPv6.
|
|
5: DNS configuration is derived from DHCPv6 on specific VLAN.
|
|
"
|
|
::= {lcsIPConfiguration 5 }
|
|
|
|
lcsDNSServerSource4 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Server Source.
|
|
0: No DNS configuration is applied
|
|
1: DNS configuration is manually set
|
|
2: DNS configuration is derived from DHCPv4
|
|
3: DNS configuration is derived from DHCPv4 on specific VLAN.
|
|
4: DNS configuration is derived from DHCPv6.
|
|
5: DNS configuration is derived from DHCPv6 on specific VLAN.
|
|
"
|
|
::= {lcsIPConfiguration 6 }
|
|
|
|
lcsDNSServerValue1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS IPv4/IPv6 Address or VLAN value."
|
|
::= {lcsIPConfiguration 7 }
|
|
|
|
lcsDNSServerValue2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS IPv4/IPv6 Address or VLAN value."
|
|
::= {lcsIPConfiguration 8 }
|
|
|
|
lcsDNSServerValue3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS IPv4/IPv6 Address or VLAN value."
|
|
::= {lcsIPConfiguration 9 }
|
|
|
|
lcsDNSServerValue4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS IPv4/IPv6 Address or VLAN value."
|
|
::= {lcsIPConfiguration 10 }
|
|
|
|
lcsDNSProxy OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Proxy enable/disable.
|
|
default:0
|
|
0: disable
|
|
1: enable"
|
|
::= {lcsIPConfiguration 11 }
|
|
|
|
|
|
lcsIPInterfaces OBJECT IDENTIFIER ::= { lcsIP 3 }
|
|
|
|
lcsIPInterfacesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPInterfacesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of IP interface for switch."
|
|
::= { lcsIPInterfaces 1 }
|
|
|
|
lcsIPInterfacesEntry OBJECT-TYPE
|
|
SYNTAX LCSIPInterfacesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the lcsIPInterfacesTable."
|
|
INDEX { lcsIPInterfacesIndex }
|
|
::= { lcsIPInterfacesTable 1 }
|
|
|
|
LCSIPInterfacesEntry ::=
|
|
SEQUENCE {
|
|
lcsIPInterfacesIndex Integer32,
|
|
lcsIPInterfacesVLAN Integer32,
|
|
lcsIPInterfacesIPv4DHCP Integer32,
|
|
lcsIPInterfacesIPv4DHCPFallback DisplayString,
|
|
lcsIPInterfacesIPv4DHCPCurrentLease IpAddress,
|
|
lcsIPInterfacesIPv4Address IpAddress,
|
|
lcsIPInterfacesIPv4Mask Integer32,
|
|
lcsIPInterfacesIPv6DHCP Integer32,
|
|
lcsIPInterfacesIPv6RapidCommit Integer32,
|
|
lcsIPInterfacesIPv6CurrentLease DisplayString,
|
|
lcsIPInterfacesIPv6Address DisplayString,
|
|
lcsIPInterfacesIPv6Mask Integer32,
|
|
lcsIPInterfacesRowStatus RowStatus
|
|
}
|
|
|
|
lcsIPInterfacesIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"interface table index"
|
|
::= {lcsIPInterfacesEntry 1 }
|
|
|
|
lcsIPInterfacesVLAN OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID for interface, range: 1-4094."
|
|
::= {lcsIPInterfacesEntry 2 }
|
|
|
|
lcsIPInterfacesIPv4DHCP OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 DHCP Setting for interface.
|
|
default:0
|
|
0: disable
|
|
1: enable"
|
|
::= {lcsIPInterfacesEntry 3 }
|
|
|
|
lcsIPInterfacesIPv4DHCPFallback OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 DHCP fallbcak. range: 1-4294967295 seconds."
|
|
::= {lcsIPInterfacesEntry 4 }
|
|
|
|
|
|
lcsIPInterfacesIPv4DHCPCurrentLease OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 DHCP Current Lease Address for interface."
|
|
::= {lcsIPInterfacesEntry 5 }
|
|
|
|
|
|
lcsIPInterfacesIPv4Address OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 address for interface."
|
|
::= {lcsIPInterfacesEntry 6 }
|
|
|
|
lcsIPInterfacesIPv4Mask OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 mask for interface."
|
|
::= { lcsIPInterfacesEntry 7 }
|
|
|
|
lcsIPInterfacesIPv6DHCP OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 DHCP Setting for interface.
|
|
default:0
|
|
0: disable
|
|
1: enable"
|
|
::= {lcsIPInterfacesEntry 8 }
|
|
|
|
lcsIPInterfacesIPv6RapidCommit OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the DHCPv6 Rapid-Commit option.
|
|
default:0
|
|
0: disable
|
|
1: enable"
|
|
::= {lcsIPInterfacesEntry 9 }
|
|
|
|
lcsIPInterfacesIPv6CurrentLease OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 DHCP Current Lease Address for interface."
|
|
::= {lcsIPInterfacesEntry 10 }
|
|
|
|
|
|
lcsIPInterfacesIPv6Address OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 address for interface."
|
|
::= { lcsIPInterfacesEntry 11 }
|
|
|
|
lcsIPInterfacesIPv6Mask OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 mask for interface."
|
|
::= { lcsIPInterfacesEntry 12 }
|
|
|
|
lcsIPInterfacesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is used
|
|
to create/delete entries. Any object in an entry of this
|
|
table may be modified while the value of the corresponding
|
|
instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsIPInterfacesEntry 13 }
|
|
|
|
|
|
lcsIPRoutes OBJECT IDENTIFIER ::= { lcsIP 4 }
|
|
|
|
lcsIPRoutesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPRoutesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP routes table for switch."
|
|
::= { lcsIPRoutes 1 }
|
|
|
|
lcsIPRoutesEntry OBJECT-TYPE
|
|
SYNTAX LCSIPRoutesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in the lcsIPRoutesTable."
|
|
INDEX { lcsIPRoutesIndex }
|
|
::= { lcsIPRoutesTable 1 }
|
|
|
|
LCSIPRoutesEntry ::=
|
|
SEQUENCE {
|
|
lcsIPRoutesIndex Integer32,
|
|
lcsIPRoutesNetwork DisplayString,
|
|
lcsIPRoutesMaskLength Integer32,
|
|
lcsIPRoutesGateway DisplayString,
|
|
lcsIPRoutesNextHopVLAN Integer32,
|
|
lcsIPRoutesRowStatus RowStatus
|
|
}
|
|
|
|
lcsIPRoutesIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"routes table index"
|
|
::= {lcsIPRoutesEntry 2 }
|
|
|
|
lcsIPRoutesNetwork OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4/IPv6 Network address.
|
|
Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa.
|
|
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry.
|
|
If Set IPRoutesNetwork, please also set IPRoutesMaskLength, IPRoutesGateway, IPRoutesNextHopVLAN."
|
|
::= {lcsIPRoutesEntry 3 }
|
|
|
|
lcsIPRoutesMaskLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4/IPv6 mask length.
|
|
Please set IPRoutesNetwork first.
|
|
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry."
|
|
::= { lcsIPRoutesEntry 4 }
|
|
|
|
lcsIPRoutesGateway OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4/IPv6 Gateway.
|
|
Please set IPRoutesNetwork first.
|
|
Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa.
|
|
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry."
|
|
::= {lcsIPRoutesEntry 5 }
|
|
|
|
lcsIPRoutesNextHopVLAN OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Next Hop VLAN ID, range: 1-4094.
|
|
Please set IPRoutesNetwork first.
|
|
This entry only work when 1.network address is IPv6, 2.Gateway is link-local, 3.Interface of specific VLAN ID is IPv6.
|
|
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry."
|
|
::= {lcsIPRoutesEntry 6 }
|
|
|
|
lcsIPRoutesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is used
|
|
to create/delete entries. Any object in an entry of this
|
|
table may be modified while the value of the corresponding
|
|
instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsIPRoutesEntry 7 }
|
|
|
|
lcsIPStatusInterface OBJECT IDENTIFIER ::= { lcsIP 8 }
|
|
|
|
lcsIPStatusInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPStatusInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system IP Status table to show all IP interfaces."
|
|
::= { lcsIPStatusInterface 1 }
|
|
|
|
lcsIPStatusInterfaceEntry OBJECT-TYPE
|
|
SYNTAX LCSIPStatusInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the IP Status Table."
|
|
INDEX { lcsIPStatusInterfaceIndex }
|
|
::= { lcsIPStatusInterfaceTable 1 }
|
|
|
|
LCSIPStatusInterfaceEntry ::= SEQUENCE {
|
|
lcsIPStatusInterfaceIndex Integer32,
|
|
lcsIPStatusInterfaceName DisplayString,
|
|
lcsIPStatusInterfaceType DisplayString,
|
|
lcsIPStatusInterfaceAddress DisplayString,
|
|
lcsIPStatusInterfaceStatus DisplayString
|
|
}
|
|
|
|
lcsIPStatusInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of table to show all IP interfaces."
|
|
::= { lcsIPStatusInterfaceEntry 1 }
|
|
|
|
lcsIPStatusInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the interface."
|
|
::= { lcsIPStatusInterfaceEntry 2 }
|
|
|
|
lcsIPStatusInterfaceType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of the entry. This may be LINK or IPv4."
|
|
::= { lcsIPStatusInterfaceEntry 3 }
|
|
|
|
lcsIPStatusInterfaceAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current address of the interface (of the given type)."
|
|
::= { lcsIPStatusInterfaceEntry 4 }
|
|
|
|
lcsIPStatusInterfaceStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status flags of the interface (and/or address)."
|
|
::= { lcsIPStatusInterfaceEntry 5 }
|
|
|
|
lcsIPStatusRoute OBJECT IDENTIFIER ::= { lcsIP 9 }
|
|
|
|
lcsIPStatusRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPStatusRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Status Route table show all routing entries."
|
|
::= { lcsIPStatusRoute 1 }
|
|
|
|
lcsIPStatusRouteEntry OBJECT-TYPE
|
|
SYNTAX LCSIPStatusRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"an entry in the IP Status route table."
|
|
INDEX { lcsIPStatusRouteIndex }
|
|
::= { lcsIPStatusRouteTable 1 }
|
|
|
|
LCSIPStatusRouteEntry ::= SEQUENCE {
|
|
lcsIPStatusRouteIndex Integer32,
|
|
lcsIPStatusRouteNetwork DisplayString,
|
|
lcsIPStatusRouteGateway DisplayString,
|
|
lcsIPStatusRouteAddress DisplayString
|
|
}
|
|
|
|
lcsIPStatusRouteIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2048)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of table to show all routing entries."
|
|
::= { lcsIPStatusRouteEntry 1 }
|
|
|
|
lcsIPStatusRouteNetwork OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP network or host address of this route."
|
|
::= { lcsIPStatusRouteEntry 2 }
|
|
|
|
lcsIPStatusRouteGateway OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway address of this route."
|
|
::= { lcsIPStatusRouteEntry 3 }
|
|
|
|
lcsIPStatusRouteAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route address."
|
|
::= { lcsIPStatusRouteEntry 4 }
|
|
|
|
lcsIPStatusNeighborCache OBJECT IDENTIFIER ::= { lcsIP 10 }
|
|
|
|
lcsIPStatusNeighborCacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPStatusNeighborCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ip Status Neighbor Cache Table."
|
|
::= { lcsIPStatusNeighborCache 1 }
|
|
|
|
lcsIPStatusNeighborCacheEntry OBJECT-TYPE
|
|
SYNTAX LCSIPStatusNeighborCacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Ip Status Neighbor Cache Table."
|
|
INDEX { lcsIPStatusNeighborCacheIndex }
|
|
::= { lcsIPStatusNeighborCacheTable 1 }
|
|
|
|
LCSIPStatusNeighborCacheEntry ::= SEQUENCE {
|
|
lcsIPStatusNeighborCacheIndex Integer32,
|
|
lcsIPStatusNeighborCacheIPAddress DisplayString,
|
|
lcsIPStatusNeighborCacheLinkAddress DisplayString
|
|
}
|
|
|
|
lcsIPStatusNeighborCacheIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for the Ip Status Neighbor Cache Table."
|
|
::= { lcsIPStatusNeighborCacheEntry 1 }
|
|
|
|
lcsIPStatusNeighborCacheIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the entry."
|
|
::= { lcsIPStatusNeighborCacheEntry 2 }
|
|
|
|
lcsIPStatusNeighborCacheLinkAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link (MAC) address for which a binding to the
|
|
IP address given exist."
|
|
::= { lcsIPStatusNeighborCacheEntry 3 }
|
|
|
|
lcsIPStatusDNSServer OBJECT IDENTIFIER ::= { lcsIP 11 }
|
|
|
|
lcsIPStatusDNSServerType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration type of DNS server."
|
|
::= { lcsIPStatusDNSServer 1 }
|
|
|
|
lcsIPStatusDNSServerIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DNS server."
|
|
::= { lcsIPStatusDNSServer 2 }
|
|
|
|
lcsIPStatusDNSServerInterface OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the interface."
|
|
::= { lcsIPStatusDNSServer 3 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsSyslog OBJECT IDENTIFIER ::= { lcsSystem 5 }
|
|
|
|
lcsSyslogConf OBJECT IDENTIFIER ::= { lcsSyslog 1 }
|
|
|
|
lcsSysLogInfo OBJECT IDENTIFIER ::= { lcsSyslog 2 }
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Objects in the lcsSystemLog Group
|
|
-- =======================================================================================================================
|
|
--lcsSystemLogConf
|
|
|
|
lcsSystemLogServerMode OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The System log server mode admin state."
|
|
DEFVAL { disable }
|
|
::= { lcsSyslogConf 1 }
|
|
|
|
lcsSystemLogServerAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Host address of syslog server."
|
|
::= { lcsSyslogConf 2 }
|
|
|
|
-- lcsSystemLogSyslogLevel OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- info(0),
|
|
-- warning(1),
|
|
-- error(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The syslog level.
|
|
-- info(0) : Info.
|
|
-- warning(1): Warning.
|
|
-- error(2) : Error."
|
|
-- DEFVAL { info }
|
|
-- ::= { lcsSyslogConf 3 }
|
|
|
|
lcsSystemLogServerPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"syslog service port number.
|
|
range : 1-65535, default : 514."
|
|
::= { lcsSyslogConf 4 }
|
|
|
|
--lcsSystemLogInfo
|
|
lcsSystemLogInfoLevel OBJECT-TYPE
|
|
SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7), all(8) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Level input field is used to filter the display system log entries.
|
|
0: Emergency.
|
|
1: Alert.
|
|
2: Critical.
|
|
3: Error.
|
|
4: Warning.
|
|
5: Notice.
|
|
6: Information.
|
|
7: Debug.
|
|
8: All."
|
|
DEFVAL { all }
|
|
::= { lcsSysLogInfo 1 }
|
|
|
|
lcsSystemLogInfoClearLevel OBJECT-TYPE
|
|
SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7), all(8) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Clear Level input field is used to specify which
|
|
system log entries will be cleared.
|
|
default: 8 (All).
|
|
0: Emergency.
|
|
1: Alert.
|
|
2: Critical.
|
|
3: Error.
|
|
4: Warning.
|
|
5: Notice.
|
|
6: Information.
|
|
7: Debug.
|
|
8: All."
|
|
DEFVAL { all }
|
|
::= { lcsSysLogInfo 2 }
|
|
|
|
lcsSystemLogInfoClearCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Command to clear the syslog.
|
|
noAction(0) : do nothing (read only).
|
|
activate(1) : Clear Syslog."
|
|
DEFVAL { noAction }
|
|
::= { lcsSysLogInfo 3 }
|
|
|
|
lcsSystemLogDetailedInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSystemLogDetailedInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system detailed Log Info table."
|
|
::= { lcsSysLogInfo 4 }
|
|
|
|
lcsSystemLogDetailedInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSSystemLogDetailedInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the system detailed Log Info table."
|
|
INDEX { lcsSystemLogDetailedInfoID }
|
|
::= { lcsSystemLogDetailedInfoTable 1 }
|
|
|
|
LCSSystemLogDetailedInfoEntry ::= SEQUENCE {
|
|
lcsSystemLogDetailedSwitchIndex Integer32,
|
|
lcsSystemLogDetailedInfoID Integer32,
|
|
lcsSystemLogDetailedInfoLevel DisplayString,
|
|
lcsSystemLogDetailedInfoTime DisplayString,
|
|
lcsSystemLogDetailedInfoMessage DisplayString
|
|
}
|
|
|
|
lcsSystemLogDetailedSwitchIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch index for the system detailed Log Info table."
|
|
::= { lcsSystemLogDetailedInfoEntry 1 }
|
|
|
|
lcsSystemLogDetailedInfoID OBJECT-TYPE
|
|
SYNTAX Integer32(1..999)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index for the system detailed Log Info table."
|
|
::= { lcsSystemLogDetailedInfoEntry 2 }
|
|
|
|
lcsSystemLogDetailedInfoLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Info Level."
|
|
::= { lcsSystemLogDetailedInfoEntry 3 }
|
|
|
|
lcsSystemLogDetailedInfoTime OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time"
|
|
::= { lcsSystemLogDetailedInfoEntry 4 }
|
|
|
|
lcsSystemLogDetailedInfoMessage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The message of this entry."
|
|
::= { lcsSystemLogDetailedInfoEntry 5 }
|
|
-- =======================================================================================================================
|
|
lcsSnmp OBJECT IDENTIFIER ::= { lcsSystem 6 }
|
|
|
|
lcsSnmpSystem OBJECT IDENTIFIER ::= { lcsSnmp 1 }
|
|
|
|
lcsSnmpSystemMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP mode operation.
|
|
default : 1, 0: disable, 1: enable. "
|
|
::= { lcsSnmpSystem 1 }
|
|
|
|
--lcsSnmpSystemVersion OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "SNMP supported version.
|
|
-- default : snmpv2c.
|
|
-- 0: snmpv1
|
|
-- 1: snmpv2c
|
|
-- 3: snmpv3."
|
|
-- ::= { lcsSnmpSystem 2 }
|
|
|
|
lcsSnmpSystemReadCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the community read access string to permit access to SNMP agent.
|
|
The allowed string length is 0 to 255.
|
|
The field is applicable only when SNMP version is SNMPv1 or SNMPv2c."
|
|
::= { lcsSnmpSystem 3 }
|
|
|
|
lcsSnmpSystemWriteCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the community write access string to permit access to SNMP agent.
|
|
The allowed string length is 0 to 255.
|
|
The field is applicable only when SNMP version is SNMPv1 or SNMPv2c."
|
|
::= { lcsSnmpSystem 4 }
|
|
|
|
--lcsSnmpSystemEngineID OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the SNMPv3 engine ID.
|
|
-- The string must contain an even number(in hexadecimal format) with number of digits between 10 and 64,
|
|
-- but all-zeros and all-'F's are not allowed.
|
|
-- Allow string length is 10 to 32.
|
|
-- Change of the Engine ID will clear all original local users."
|
|
-- ::= { lcsSnmpSystem 5 }
|
|
|
|
lcsSnmpSystemWriteCommunityMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP write community mode operation.
|
|
default : 1, 0: disable, 1: enable. "
|
|
::= { lcsSnmpSystem 6 }
|
|
|
|
lcsSnmpSystemReadCommunityMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP read community mode operation.
|
|
default : 1, 0: disable, 1: enable. "
|
|
::= { lcsSnmpSystem 7 }
|
|
|
|
|
|
--lcsSnmpTrapGlobalMode OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the trap mode operation.
|
|
-- 0:Disable.
|
|
-- 1:Enable."
|
|
-- ::= { lcsSnmp 2 }
|
|
|
|
lcsTrapDestinationConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSTrapDestinationConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of trap host entry. The numbers of entries are given by the value of TrapHostConfNumber."
|
|
::= { lcsSnmp 3 }
|
|
|
|
lcsTrapDestinationConfEntry OBJECT-TYPE
|
|
SYNTAX LCSTrapDestinationConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the entry information for trap host."
|
|
INDEX { lcsTrapDestinationConfIndex }
|
|
::= { lcsTrapDestinationConfTable 1 }
|
|
|
|
LCSTrapDestinationConfEntry ::= SEQUENCE {
|
|
lcsTrapDestinationConfIndex Integer32,
|
|
lcsTrapDestinationConfTrapConfigName DisplayString,
|
|
lcsTrapDestinationConfTrapMode Integer32,
|
|
lcsTrapDestinationConfTrapVersion Integer32,
|
|
lcsTrapDestinationConfTrapCommunity DisplayString,
|
|
lcsTrapDestinationConfTrapDestinationAddres DisplayString,
|
|
lcsTrapDestinationConfTrapDestinationPort Integer32,
|
|
-- lcsTrapDestinationConfTrapInformMode Integer32,
|
|
-- lcsTrapDestinationConfTrapInformTimeout Integer32,
|
|
-- lcsTrapDestinationConfTrapInformRetryTimes Integer32,
|
|
-- lcsTrapDestinationConfTrapProbeSecurityEngineID Integer32,
|
|
lcsTrapDestinationConfTrapSecurityEngineID DisplayString,
|
|
lcsTrapDestinationConfTrapSecurityName DisplayString,
|
|
lcsTrapDestinationConfTrapRowStatus Integer32
|
|
}
|
|
|
|
lcsTrapDestinationConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of tarp destination configurations."
|
|
::= { lcsTrapDestinationConfEntry 1 }
|
|
|
|
lcsTrapDestinationConfTrapConfigName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which trap Configuration's name for configuring.
|
|
The allowed string length is 0 to 255, and the allowed content is
|
|
ASCII characters from 33 to 126."
|
|
::= { lcsTrapDestinationConfEntry 2 }
|
|
|
|
lcsTrapDestinationConfTrapMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the SNMP mode operation. Possible modes are:
|
|
2: Enable TCP SNMP mode operation.
|
|
1: Enable UDP SNMP mode operation.
|
|
0: Disable SNMP mode operation. "
|
|
::= { lcsTrapDestinationConfEntry 3 }
|
|
|
|
lcsTrapDestinationConfTrapVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: snmpv1
|
|
1: snmpv2c
|
|
3: snmpv3.
|
|
"
|
|
::= { lcsTrapDestinationConfEntry 4 }
|
|
|
|
lcsTrapDestinationConfTrapCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the community access string when sending SNMP trap packet.
|
|
The allowed string length is 0 to 255, and the allowed content is
|
|
ASCII characters from 33 to 126."
|
|
::= { lcsTrapDestinationConfEntry 5 }
|
|
|
|
lcsTrapDestinationConfTrapDestinationAddres OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the SNMP trap destination address.
|
|
It allow a valid IP address in dotted decimal notation ('x.y.z.w').
|
|
And it also allow a valid hostname.
|
|
A valid hostname is a string drawn from the alphabet (A-Za-z), digits (0-9),
|
|
dot (.), dash (-). Spaces are not allowed, the first character must be an alpha character,
|
|
and the first and last characters must not be a dot or a dash.
|
|
Indicates the SNMP trap destination IPv6 address.
|
|
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits
|
|
with a colon separating each field (:).
|
|
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax
|
|
that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros;
|
|
but it can appear only once.
|
|
It can also represent a legally valid IPv4 address.
|
|
For example, '::192.1.2.34'."
|
|
::= { lcsTrapDestinationConfEntry 6 }
|
|
|
|
lcsTrapDestinationConfTrapDestinationPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the SNMP trap destination port.
|
|
SNMP Agent will send SNMP message via this port,
|
|
the port range is 1~65535."
|
|
::= { lcsTrapDestinationConfEntry 7 }
|
|
|
|
--lcsTrapDestinationConfTrapInformMode OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the SNMP trap inform mode operation. Possible modes are:
|
|
-- 1: Enable SNMP trap inform mode operation.
|
|
-- 0: Disable SNMP trap inform mode operation. "
|
|
-- ::= { lcsTrapDestinationConfEntry 8 }
|
|
--
|
|
--lcsTrapDestinationConfTrapInformTimeout OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147."
|
|
-- ::= { lcsTrapDestinationConfEntry 9 }
|
|
--
|
|
--lcsTrapDestinationConfTrapInformRetryTimes OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the SNMP trap inform retry times. The allowed range is 0 to 255."
|
|
-- ::= { lcsTrapDestinationConfEntry 10 }
|
|
--
|
|
--lcsTrapDestinationConfTrapProbeSecurityEngineID OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the SNMP trap probe security engine ID mode of operation.
|
|
-- Possible values are:
|
|
-- 1: Enable SNMP trap probe security engine ID mode of operation.
|
|
-- 0: Disable SNMP trap probe security engine ID mode of operation."
|
|
-- ::= { lcsTrapDestinationConfEntry 11 }
|
|
|
|
lcsTrapDestinationConfTrapSecurityEngineID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the SNMP trap security engine ID.
|
|
SNMPv3 sends traps and informs using USM for authentication and privacy.
|
|
A unique engine ID for these traps and informs is needed.
|
|
When Trap Probe Security Engine ID is enabled, the ID will be probed automatically.
|
|
Otherwise, the ID specified in this field is used.
|
|
The string must contain an even number(in hexadecimal format) with
|
|
number of digits between 10 and 64, but all-zeros and all-'F's are not allowed."
|
|
::= { lcsTrapDestinationConfEntry 12 }
|
|
|
|
lcsTrapDestinationConfTrapSecurityName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the SNMP trap security name.
|
|
SNMPv3 traps and informs using USM for authentication and privacy.
|
|
A unique security name is needed when traps and informs are enabled.
|
|
This name from user name of user configuration."
|
|
::= { lcsTrapDestinationConfEntry 13 }
|
|
|
|
lcsTrapDestinationConfTrapRowStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create(5)/delete(6) entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsTrapDestinationConfEntry 14 }
|
|
|
|
|
|
lcsSNMPCommunityConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSNMPCommunityConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of snmp community configuration entry."
|
|
::= { lcsSnmp 5 }
|
|
|
|
lcsSNMPCommunityConfEntry OBJECT-TYPE
|
|
SYNTAX LCSSNMPCommunityConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the entry information for snmp community configuration."
|
|
INDEX { lcsSNMPCommunityConfIndex }
|
|
::= { lcsSNMPCommunityConfTable 1 }
|
|
|
|
LCSSNMPCommunityConfEntry ::= SEQUENCE {
|
|
lcsSNMPCommunityConfIndex Integer32,
|
|
lcsSNMPCommunityConfSNMPv3Community DisplayString,
|
|
lcsSNMPCommunityConfSNMPv3SourceIP IpAddress,
|
|
lcsSNMPCommunityConfSNMPv3SourceMask IpAddress,
|
|
lcsSNMPCommunityConfSNMPv3RowStatus Integer32
|
|
}
|
|
|
|
lcsSNMPCommunityConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Community configuration index."
|
|
::= { lcsSNMPCommunityConfEntry 1 }
|
|
|
|
lcsSNMPCommunityConfSNMPv3Community OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the community access string to permit access to SNMPv3 agent.
|
|
The allowed string length is 1 to 32, and the allowed content is
|
|
ASCII characters from 33 to 126.
|
|
The community string will be treated as security name and map a SNMPv1
|
|
or SNMPv2c community string."
|
|
::= { lcsSNMPCommunityConfEntry 2 }
|
|
|
|
|
|
lcsSNMPCommunityConfSNMPv3SourceIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the SNMP access source address.
|
|
A particular range of source addresses can be used to restrict source subnet
|
|
when combined with source mask."
|
|
::= {lcsSNMPCommunityConfEntry 3 }
|
|
|
|
lcsSNMPCommunityConfSNMPv3SourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the SNMP access source address mask."
|
|
::= {lcsSNMPCommunityConfEntry 4 }
|
|
|
|
lcsSNMPCommunityConfSNMPv3RowStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create(5)/delete(6) entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsSNMPCommunityConfEntry 5 }
|
|
|
|
lcsSNMPv3UserConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSNMPv3UserConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of snmpv3 user configuration entry."
|
|
::= { lcsSnmp 6 }
|
|
|
|
lcsSNMPv3UserConfEntry OBJECT-TYPE
|
|
SYNTAX LCSSNMPv3UserConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the entry information for snmpv3 user configuration."
|
|
INDEX { lcsSNMPv3UserConfIndex }
|
|
::= { lcsSNMPv3UserConfTable 1 }
|
|
|
|
LCSSNMPv3UserConfEntry ::= SEQUENCE {
|
|
lcsSNMPv3UserConfIndex Integer32,
|
|
lcsSNMPv3UserConfEngineID DisplayString,
|
|
lcsSNMPv3UserConfUserName DisplayString,
|
|
lcsSNMPv3UserConfSecurityLevel SNMPv3SecurityLevel,
|
|
lcsSNMPv3UserConfAuthenticationProtocol SNMPv3AuthenticationProtocol,
|
|
lcsSNMPv3UserConfAuthenticationPassword DisplayString,
|
|
lcsSNMPv3UserConfPrivacyProtocol SNMPv3PrivacyProtocol,
|
|
lcsSNMPv3UserConfPrivacyPassword DisplayString,
|
|
lcsSNMPv3UserConfRowStatus RowStatus
|
|
}
|
|
|
|
lcsSNMPv3UserConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User configuration index."
|
|
::= { lcsSNMPv3UserConfEntry 1 }
|
|
|
|
lcsSNMPv3UserConfEngineID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet string identifying the engine ID that this entry should belong to.
|
|
The string must contain an even number(in hexadecimal format) with
|
|
number of digits between 10 and 64, but all-zeros and all-'F's are not allowed.
|
|
The SNMPv3 architecture uses the User-based Security Model (USM)
|
|
for message security and the View-based Access Control Model (VACM) for access control.
|
|
For the USM entry, the usmUserEngineID and usmUserName are the entry's keys.
|
|
In a simple agent, usmUserEngineID is always that agent's own snmpEngineID value.
|
|
The value can also take the value of the snmpEngineID of a remote SNMP engine with
|
|
which this user can communicate. In other words, if user engine ID equal system engine ID
|
|
then it is local user; otherwise it's remote user. "
|
|
::= { lcsSNMPv3UserConfEntry 2 }
|
|
|
|
lcsSNMPv3UserConfUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string identifying the user name that this entry should belong to.
|
|
The allowed string length is 1 to 32, and the allowed contents are
|
|
ASCII characters from 33 to 126."
|
|
::= { lcsSNMPv3UserConfEntry 3 }
|
|
|
|
lcsSNMPv3UserConfSecurityLevel OBJECT-TYPE
|
|
SYNTAX SNMPv3SecurityLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 USM security level."
|
|
::= { lcsSNMPv3UserConfEntry 4 }
|
|
|
|
lcsSNMPv3UserConfAuthenticationProtocol OBJECT-TYPE
|
|
SYNTAX SNMPv3AuthenticationProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 USM authentication protocol."
|
|
::= { lcsSNMPv3UserConfEntry 5 }
|
|
|
|
lcsSNMPv3UserConfAuthenticationPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string identifying the authentication password phrase.
|
|
The allowed string length is 8 to 64, and the allowed contents are
|
|
ASCII characters from 33 to 126.
|
|
Does only read '*****' instead of the password or localized key."
|
|
::= { lcsSNMPv3UserConfEntry 6 }
|
|
|
|
lcsSNMPv3UserConfPrivacyProtocol OBJECT-TYPE
|
|
SYNTAX SNMPv3PrivacyProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 USM privacy protocol."
|
|
::= { lcsSNMPv3UserConfEntry 7 }
|
|
|
|
lcsSNMPv3UserConfPrivacyPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string identifying the privacy password phrase.
|
|
The allowed string length is 8 to 64, and the allowed contents are
|
|
ASCII characters from 33 to 126.
|
|
Does only read '*****' instead of the password or localized key."
|
|
::= { lcsSNMPv3UserConfEntry 8 }
|
|
|
|
lcsSNMPv3UserConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create(5)/delete(6) entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsSNMPv3UserConfEntry 9 }
|
|
|
|
lcsSNMPv3GroupConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSNMPv3GroupConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of snmpv3 group configuration entry."
|
|
::= { lcsSnmp 7 }
|
|
|
|
lcsSNMPv3GroupConfEntry OBJECT-TYPE
|
|
SYNTAX LCSSNMPv3GroupConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the entry information for snmpv3 group configuration."
|
|
INDEX { lcsSNMPv3GroupConfIndex }
|
|
::= { lcsSNMPv3GroupConfTable 1 }
|
|
|
|
LCSSNMPv3GroupConfEntry ::= SEQUENCE {
|
|
lcsSNMPv3GroupConfIndex Integer32,
|
|
lcsSNMPv3GroupConfSecurityModel Integer32,
|
|
lcsSNMPv3GroupConfSecurityName DisplayString,
|
|
lcsSNMPv3GroupConfGroupName DisplayString,
|
|
lcsSNMPv3GroupConfRowStatus RowStatus
|
|
}
|
|
|
|
lcsSNMPv3GroupConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group configuration index."
|
|
::= { lcsSNMPv3GroupConfEntry 1 }
|
|
|
|
lcsSNMPv3GroupConfSecurityModel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1:v1
|
|
2:v2c
|
|
3:usm"
|
|
::= { lcsSNMPv3GroupConfEntry 2 }
|
|
|
|
lcsSNMPv3GroupConfSecurityName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string identifying the security name that this entry should belong to.
|
|
The allowed string length is 1 to 32, and the allowed content is
|
|
ASCII characters from 33 to 126.
|
|
This name is from the Community of Community configuration."
|
|
::= { lcsSNMPv3GroupConfEntry 3 }
|
|
|
|
lcsSNMPv3GroupConfGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string identifying the group name that this entry should belong to.
|
|
The allowed string length is 1 to 32, and the allowed content is
|
|
ASCII characters from 33 to 126. "
|
|
::= { lcsSNMPv3GroupConfEntry 4 }
|
|
|
|
|
|
lcsSNMPv3GroupConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create(5)/delete(6) entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsSNMPv3GroupConfEntry 5 }
|
|
|
|
lcsSNMPv3ViewsConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSNMPv3ViewsConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of snmpv3 view configuration entry."
|
|
::= { lcsSnmp 8 }
|
|
|
|
lcsSNMPv3ViewsConfEntry OBJECT-TYPE
|
|
SYNTAX LCSSNMPv3ViewsConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the entry information for snmpv3 view configuration."
|
|
INDEX { lcsSNMPv3ViewsConfIndex }
|
|
::= { lcsSNMPv3ViewsConfTable 1 }
|
|
|
|
LCSSNMPv3ViewsConfEntry ::= SEQUENCE {
|
|
lcsSNMPv3ViewsConfIndex Integer32,
|
|
lcsSNMPv3ViewsConfViewName DisplayString,
|
|
lcsSNMPv3ViewsConfViewType Integer32,
|
|
lcsSNMPv3ViewsConfOIDSubtree DisplayString,
|
|
lcsSNMPv3ViewsConfRowStatus RowStatus
|
|
}
|
|
|
|
lcsSNMPv3ViewsConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"view configuration index."
|
|
::= { lcsSNMPv3ViewsConfEntry 1 }
|
|
|
|
lcsSNMPv3ViewsConfViewName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string identifying the view name that this entry should belong to.
|
|
The allowed string length is 1 to 32, and the allowed content is
|
|
ASCII characters from 33 to 126. "
|
|
::= { lcsSNMPv3ViewsConfEntry 2 }
|
|
|
|
lcsSNMPv3ViewsConfViewType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:included
|
|
1:excluded"
|
|
::= { lcsSNMPv3ViewsConfEntry 3 }
|
|
|
|
lcsSNMPv3ViewsConfOIDSubtree OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OID defining the root of the subtree to add to the named view.
|
|
The allowed OID length is 1 to 128. The allowed string content is
|
|
digital number or asterisk(*)"
|
|
::= { lcsSNMPv3ViewsConfEntry 4 }
|
|
|
|
lcsSNMPv3ViewsConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create(5)/delete(6) entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsSNMPv3ViewsConfEntry 5 }
|
|
|
|
|
|
lcsSNMPv3AccessConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSNMPv3AccessConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of snmpv3 access configuration entry."
|
|
::= { lcsSnmp 9 }
|
|
|
|
lcsSNMPv3AccessConfEntry OBJECT-TYPE
|
|
SYNTAX LCSSNMPv3AccessConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the entry information for snmpv3 access configuration."
|
|
INDEX { lcsSNMPv3AccessConfIndex }
|
|
::= { lcsSNMPv3AccessConfTable 1 }
|
|
|
|
LCSSNMPv3AccessConfEntry ::= SEQUENCE {
|
|
lcsSNMPv3AccessConfIndex Integer32,
|
|
lcsSNMPv3AccessConfGroupName DisplayString,
|
|
lcsSNMPv3AccessConfSecurityModel Integer32,
|
|
lcsSNMPv3AccessConfSecurityLevel SNMPv3SecurityLevel,
|
|
lcsSNMPv3AccessConfReadViewName DisplayString,
|
|
lcsSNMPv3AccessConfWriteViewName DisplayString,
|
|
lcsSNMPv3AccessConfRowStatus RowStatus
|
|
}
|
|
|
|
lcsSNMPv3AccessConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access configuration index"
|
|
::= { lcsSNMPv3AccessConfEntry 1 }
|
|
|
|
lcsSNMPv3AccessConfGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group name from Group configuration."
|
|
::= { lcsSNMPv3AccessConfEntry 2 }
|
|
|
|
lcsSNMPv3AccessConfSecurityModel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:any
|
|
1:v1
|
|
2:v2c
|
|
3:usm"
|
|
::= { lcsSNMPv3AccessConfEntry 3 }
|
|
|
|
lcsSNMPv3AccessConfSecurityLevel OBJECT-TYPE
|
|
SYNTAX SNMPv3SecurityLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMPv3 USM security level."
|
|
::= { lcsSNMPv3AccessConfEntry 4 }
|
|
|
|
lcsSNMPv3AccessConfReadViewName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Read View Name from View configuration."
|
|
::= { lcsSNMPv3AccessConfEntry 5 }
|
|
|
|
lcsSNMPv3AccessConfWriteViewName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Write View Name from View configuration."
|
|
::= { lcsSNMPv3AccessConfEntry 6 }
|
|
|
|
lcsSNMPv3AccessConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create(5)/delete(6) entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsSNMPv3AccessConfEntry 7 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsDHCPServer OBJECT IDENTIFIER ::= { lcsSystem 9 }
|
|
|
|
lcsDHCPServerConfig OBJECT IDENTIFIER ::= { lcsDHCPServer 7 }
|
|
|
|
lcsDHCPServerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSDHCPServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPServerConfig 1 }
|
|
|
|
lcsDHCPServerConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSDHCPServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsDHCPServerConfigIndex }
|
|
::= { lcsDHCPServerConfigTable 1 }
|
|
|
|
|
|
LCSDHCPServerConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsDHCPServerConfigIndex Integer32,
|
|
lcsDHCPServerConfigInterfaceVLAN Integer32,
|
|
lcsDHCPServerConfigInterfaceMode Integer32,
|
|
lcsDHCPServerConfigInterfaceStartIPEndIP DisplayString,
|
|
-- lcsDHCPServerConfigInterfaceEndIP IpAddress,
|
|
lcsDHCPServerConfigInterfaceLeaseTime Integer32,
|
|
lcsDHCPServerConfigInterfaceSubnetMask IpAddress,
|
|
lcsDHCPServerConfigInterfaceDefaultRouter IpAddress,
|
|
lcsDHCPServerConfigInterfaceDNSServer IpAddress
|
|
}
|
|
|
|
lcsDHCPServerConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"table index."
|
|
::= {lcsDHCPServerConfigEntry 1 }
|
|
|
|
lcsDHCPServerConfigInterfaceVLAN OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN in which DHCP server is enabled or disabled. "
|
|
::= {lcsDHCPServerConfigEntry 2 }
|
|
|
|
lcsDHCPServerConfigInterfaceMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the operation mode per VLAN.
|
|
0:disable
|
|
1:enable"
|
|
::= {lcsDHCPServerConfigEntry 3 }
|
|
|
|
lcsDHCPServerConfigInterfaceStartIPEndIP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Please set SubnetMask first.
|
|
Start IP and End IP. Format: x.x.x.x-x.x.x.x"
|
|
::= {lcsDHCPServerConfigEntry 4 }
|
|
|
|
--lcsDHCPServerConfigInterfaceEndIP OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "End IP"
|
|
-- ::= {lcsDHCPServerConfigEntry 5 }
|
|
|
|
lcsDHCPServerConfigInterfaceLeaseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lease time in second."
|
|
::= {lcsDHCPServerConfigEntry 6 }
|
|
|
|
lcsDHCPServerConfigInterfaceSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure subnet mask of the DHCP address. "
|
|
::= {lcsDHCPServerConfigEntry 7 }
|
|
|
|
lcsDHCPServerConfigInterfaceDefaultRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the destination IP network or host address of the default route."
|
|
::= {lcsDHCPServerConfigEntry 8 }
|
|
|
|
lcsDHCPServerConfigInterfaceDNSServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the default DNS server. "
|
|
::= {lcsDHCPServerConfigEntry 9 }
|
|
|
|
lcsDHCPServerStatus OBJECT IDENTIFIER ::= { lcsDHCPServer 8 }
|
|
|
|
lcsDHCPServerStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSDHCPServerStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPServerStatus 1 }
|
|
|
|
lcsDHCPServerStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSDHCPServerStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsDHCPServerStatusIndex }
|
|
::= { lcsDHCPServerStatusTable 1 }
|
|
|
|
|
|
LCSDHCPServerStatusEntry ::=
|
|
SEQUENCE {
|
|
lcsDHCPServerStatusIndex Integer32,
|
|
lcsDHCPServerStatusInterfaceVLAN Integer32,
|
|
lcsDHCPServerStatusInterfaceType DisplayString,
|
|
lcsDHCPServerStatusInterfaceStartIP IpAddress,
|
|
lcsDHCPServerStatusInterfaceEndIP IpAddress,
|
|
lcsDHCPServerStatusInterfaceLeaseTime Integer32,
|
|
lcsDHCPServerStatusInterfaceSubnetMask IpAddress,
|
|
lcsDHCPServerStatusInterfaceDefaultRouter IpAddress,
|
|
lcsDHCPServerStatusInterfaceDNSServer IpAddress
|
|
}
|
|
|
|
lcsDHCPServerStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"table index."
|
|
::= {lcsDHCPServerStatusEntry 1 }
|
|
|
|
lcsDHCPServerStatusInterfaceVLAN OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN in which DHCP server is enabled or disabled. "
|
|
::= {lcsDHCPServerStatusEntry 2 }
|
|
|
|
lcsDHCPServerStatusInterfaceType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= {lcsDHCPServerStatusEntry 3 }
|
|
|
|
lcsDHCPServerStatusInterfaceStartIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start IP"
|
|
::= {lcsDHCPServerStatusEntry 4 }
|
|
|
|
lcsDHCPServerStatusInterfaceEndIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End IP"
|
|
::= {lcsDHCPServerStatusEntry 5 }
|
|
|
|
lcsDHCPServerStatusInterfaceLeaseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lease time in second."
|
|
::= {lcsDHCPServerStatusEntry 6 }
|
|
|
|
lcsDHCPServerStatusInterfaceSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure subnet mask of the DHCP address. "
|
|
::= {lcsDHCPServerStatusEntry 7 }
|
|
|
|
lcsDHCPServerStatusInterfaceDefaultRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the destination IP network or host address of the default route."
|
|
::= {lcsDHCPServerStatusEntry 8 }
|
|
|
|
lcsDHCPServerStatusInterfaceDNSServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the default DNS server. "
|
|
::= {lcsDHCPServerStatusEntry 9 }
|
|
|
|
--lcsDHCPServerConf OBJECT IDENTIFIER ::= { lcsDHCPServer 1 }
|
|
--
|
|
--lcsDHCPServerGlobalMode OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0,
|
|
-- Global Mode :
|
|
-- 0: Disable,
|
|
-- 1: Enable.
|
|
-- "
|
|
-- ::= { lcsDHCPServerConf 1 }
|
|
--
|
|
--lcsDHCPServerVLANMode OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0,
|
|
-- 0: Disable,
|
|
-- 1: Enable.
|
|
-- "
|
|
-- ::= { lcsDHCPServerConf 2 }
|
|
--
|
|
--lcsVLANModeTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSVLANModeEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A table of VLAN Mode for DHCP Server."
|
|
-- ::= { lcsDHCPServerConf 2 }
|
|
|
|
--lcsVLANModeEntry OBJECT-TYPE
|
|
-- SYNTAX LCSVLANModeEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in the lcsVLANModeTable."
|
|
-- INDEX { lcsVLANModeIndex }
|
|
-- ::= { lcsVLANModeTable 1 }
|
|
--
|
|
--LCSVLANModeEntry ::=
|
|
-- SEQUENCE {
|
|
-- lcsVLANModeIndex Integer32,
|
|
-- lcsVLANModeRangeLow Integer32,
|
|
-- lcsVLANModeRangeHigh Integer32,
|
|
-- lcsVLANModeEnable Integer32,
|
|
-- lcsVLANModeRowStatus RowStatus
|
|
-- }
|
|
--
|
|
--lcsVLANModeIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..2048)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VLAN Mode table index, range: 1-2048."
|
|
-- ::= {lcsVLANModeEntry 1 }
|
|
--
|
|
--lcsVLANModeRangeLow OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..4094)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VLAN Mode low range: 1-4094."
|
|
-- ::= {lcsVLANModeEntry 2 }
|
|
--
|
|
--lcsVLANModeRangeHigh OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..4094)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VLAN Mode high range: 1-4094."
|
|
-- ::= {lcsVLANModeEntry 3 }
|
|
--
|
|
--lcsVLANModeEnable OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0..1)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "VLAN Mode Enable, Enable:1, Disable:0."
|
|
-- ::= {lcsVLANModeEntry 4 }
|
|
--
|
|
--lcsVLANModeRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the status of this entry, and is
|
|
-- used to create/delete entries. Any object in an entry of
|
|
-- this table may be modified while the value of the
|
|
-- corresponding instance of this object is active(1).
|
|
-- createAndGo, notReady not supported."
|
|
-- ::= { lcsVLANModeEntry 5 }
|
|
--
|
|
|
|
|
|
-- lcsDHCPServerBindingType OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0|1|2|3)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: None,
|
|
-- Global Mode :
|
|
-- 0: None,
|
|
-- 1: Automatic,
|
|
-- 2: Manual,
|
|
-- 3: Expired.
|
|
-- "
|
|
-- ::= { lcsDHCPServerConf 2 }
|
|
|
|
-- lcsDHCPServerBindingState OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0|1|2|3)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: None,
|
|
-- Global Mode :
|
|
-- 0: None,
|
|
-- 1: Allocated,
|
|
-- 2: Committed,
|
|
-- 3: Expired.
|
|
-- "
|
|
-- ::= { lcsDHCPServerConf 3 }
|
|
|
|
-- lcsDHCPServerBindingIP OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The DHCP Server Binding IP"
|
|
-- ::= { lcsDHCPServerConf 4 }
|
|
--
|
|
--
|
|
--lcsDHCPServerExcludedIP OBJECT IDENTIFIER ::= { lcsDHCPServer 2 }
|
|
--
|
|
--lcsExcludedIPTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSExcludedIPEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A table of Excluded IP for DHCP Server."
|
|
-- ::= { lcsDHCPServerExcludedIP 1 }
|
|
--
|
|
--lcsExcludedIPEntry OBJECT-TYPE
|
|
-- SYNTAX LCSExcludedIPEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "An entry in the lcsExcludedIPTable."
|
|
-- INDEX { lcsExcludedIPIndex }
|
|
-- ::= { lcsExcludedIPTable 1 }
|
|
--
|
|
--LCSExcludedIPEntry ::=
|
|
-- SEQUENCE {
|
|
-- lcsExcludedIPIndex Integer32,
|
|
-- lcsExcludedIPRangeLow IpAddress,
|
|
-- lcsExcludedIPRangeHigh IpAddress,
|
|
-- lcsExcludedIPRowStatus RowStatus
|
|
-- }
|
|
--
|
|
--lcsExcludedIPIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..16)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Excluded IP table index, range: 1-16."
|
|
-- ::= {lcsExcludedIPEntry 1 }
|
|
--
|
|
--lcsExcludedIPRangeLow OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "ExcludedIP low range."
|
|
-- ::= {lcsExcludedIPEntry 2 }
|
|
--
|
|
--lcsExcludedIPRangeHigh OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "ExcludedIP high range."
|
|
-- ::= {lcsExcludedIPEntry 3 }
|
|
--
|
|
--lcsExcludedIPRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the status of this entry, and is
|
|
-- used to create/delete entries. Any object in an entry of
|
|
-- this table may be modified while the value of the
|
|
-- corresponding instance of this object is active(1).
|
|
-- createAndGo, notReady not supported."
|
|
-- ::= {lcsExcludedIPEntry 4 }
|
|
--
|
|
--
|
|
--
|
|
--lcsDHCPServerPoolConf OBJECT IDENTIFIER ::= { lcsDHCPServer 3 }
|
|
--
|
|
--lcsDHCPServerPoolTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSDHCPServerPoolEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This is the entry information for DHCP Pool."
|
|
-- ::= { lcsDHCPServerPoolConf 1 }
|
|
--
|
|
--lcsDHCPServerPoolEntry OBJECT-TYPE
|
|
-- SYNTAX LCSDHCPServerPoolEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- INDEX { lcsDHCPServerConfIndex }
|
|
-- ::= { lcsDHCPServerPoolTable 1 }
|
|
--
|
|
--LCSDHCPServerPoolEntry ::= SEQUENCE {
|
|
-- lcsDHCPServerConfIndex Integer32,
|
|
-- lcsDHCPServerPoolName DisplayString,
|
|
-- lcsDHCPServerPoolType Integer32,
|
|
-- lcsDHCPServerIP IpAddress,
|
|
-- lcsDHCPServerSubnetMask IpAddress,
|
|
-- lcsDHCPServerLeaseTimeDays Integer32,
|
|
-- lcsDHCPServerLeaseTimeHours Integer32,
|
|
-- lcsDHCPServerLeaseTimeMinutes Integer32,
|
|
-- lcsDHCPServerDomainName DisplayString,
|
|
-- lcsDHCPServerBroadcastAddress IpAddress,
|
|
-- lcsDHCPServerDefRouter1 IpAddress,
|
|
-- lcsDHCPServerDefRouter2 IpAddress,
|
|
-- lcsDHCPServerDefRouter3 IpAddress,
|
|
-- lcsDHCPServerDefRouter4 IpAddress,
|
|
-- lcsDHCPServerDNSServer1 IpAddress,
|
|
-- lcsDHCPServerDNSServer2 IpAddress,
|
|
-- lcsDHCPServerDNSServer3 IpAddress,
|
|
-- lcsDHCPServerDNSServer4 IpAddress,
|
|
-- lcsDHCPServerNTPServer1 IpAddress,
|
|
-- lcsDHCPServerNTPServer2 IpAddress,
|
|
-- lcsDHCPServerNTPServer3 IpAddress,
|
|
-- lcsDHCPServerNTPServer4 IpAddress,
|
|
-- lcsDHCPServerNetbiosType Integer32,
|
|
-- lcsDHCPServerNetbiosScope DisplayString,
|
|
-- lcsDHCPServerNetbiosNameServer1 IpAddress,
|
|
-- lcsDHCPServerNetbiosNameServer2 IpAddress,
|
|
-- lcsDHCPServerNetbiosNameServer3 IpAddress,
|
|
-- lcsDHCPServerNetbiosNameServer4 IpAddress,
|
|
-- lcsDHCPServerNisDomainName DisplayString,
|
|
-- lcsDHCPServerNisServer1 IpAddress,
|
|
-- lcsDHCPServerNisServer2 IpAddress,
|
|
-- lcsDHCPServerNisServer3 IpAddress,
|
|
-- lcsDHCPServerNisServer4 IpAddress,
|
|
-- lcsDHCPServerClientIDType Integer32,
|
|
-- lcsDHCPServerClientID DisplayString,
|
|
-- lcsDHCPServerHWAddr DisplayString,
|
|
-- lcsDHCPServerClientName DisplayString,
|
|
-- lcsDHCPServerVendorClassID1 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo1 DisplayString,
|
|
-- lcsDHCPServerVendorClassID2 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo2 DisplayString,
|
|
-- lcsDHCPServerVendorClassID3 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo3 DisplayString,
|
|
-- lcsDHCPServerVendorClassID4 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo4 DisplayString,
|
|
-- lcsDHCPServerVendorClassID5 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo5 DisplayString,
|
|
-- lcsDHCPServerVendorClassID6 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo6 DisplayString,
|
|
-- lcsDHCPServerVendorClassID7 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo7 DisplayString,
|
|
-- lcsDHCPServerVendorClassID8 DisplayString,
|
|
-- lcsDHCPServerVendorSpecificInfo8 DisplayString,
|
|
-- lcsDHCPServerRowStatus RowStatus
|
|
--}
|
|
--
|
|
--lcsDHCPServerConfIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..64)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " pool, range : 1 - 64. "
|
|
-- ::= { lcsDHCPServerPoolEntry 1 }
|
|
--
|
|
--lcsDHCPServerPoolName OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (1..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP pool name. "
|
|
-- ::= { lcsDHCPServerPoolEntry 2 }
|
|
--
|
|
--lcsDHCPServerPoolType OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1|2)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Pool Type.
|
|
-- 0:None
|
|
-- 1:Network
|
|
-- 2:Host, please set DHCP Server IP first."
|
|
-- ::= { lcsDHCPServerPoolEntry 3 }
|
|
--
|
|
--lcsDHCPServerIP OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IP. "
|
|
-- ::= { lcsDHCPServerPoolEntry 4 }
|
|
--
|
|
--lcsDHCPServerSubnetMask OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Subnet Mask. "
|
|
-- ::= { lcsDHCPServerPoolEntry 5}
|
|
--
|
|
--lcsDHCPServerLeaseTimeDays OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..365)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Lease Time:Days. "
|
|
-- ::= { lcsDHCPServerPoolEntry 6 }
|
|
--
|
|
--lcsDHCPServerLeaseTimeHours OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..23)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Lease Time:Hours. "
|
|
-- ::= { lcsDHCPServerPoolEntry 7 }
|
|
--
|
|
--lcsDHCPServerLeaseTimeMinutes OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..59)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Lease Time:Minutes. "
|
|
-- ::= { lcsDHCPServerPoolEntry 8 }
|
|
--
|
|
--lcsDHCPServerDomainName OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..128))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Domain Name. "
|
|
-- ::= { lcsDHCPServerPoolEntry 9 }
|
|
--
|
|
--lcsDHCPServerBroadcastAddress OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Broadcast Address. "
|
|
-- ::= { lcsDHCPServerPoolEntry 10 }
|
|
--
|
|
--lcsDHCPServerDefRouter1 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Default Router 1. "
|
|
-- ::= { lcsDHCPServerPoolEntry 11 }
|
|
--
|
|
--lcsDHCPServerDefRouter2 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Default Router 2. "
|
|
-- ::= { lcsDHCPServerPoolEntry 12 }
|
|
--
|
|
--lcsDHCPServerDefRouter3 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Default Router 3. "
|
|
-- ::= { lcsDHCPServerPoolEntry 13 }
|
|
--
|
|
--lcsDHCPServerDefRouter4 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server IPv4 Default Router 4. "
|
|
-- ::= { lcsDHCPServerPoolEntry 14 }
|
|
--
|
|
--lcsDHCPServerDNSServer1 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server DNS Server 1. "
|
|
-- ::= { lcsDHCPServerPoolEntry 15 }
|
|
--
|
|
--lcsDHCPServerDNSServer2 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server DNS Server 2. "
|
|
-- ::= { lcsDHCPServerPoolEntry 16 }
|
|
--
|
|
--lcsDHCPServerDNSServer3 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server DNS Server 3. "
|
|
-- ::= { lcsDHCPServerPoolEntry 17 }
|
|
--
|
|
--lcsDHCPServerDNSServer4 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server DNS Server 4. "
|
|
-- ::= { lcsDHCPServerPoolEntry 18 }
|
|
--
|
|
--lcsDHCPServerNTPServer1 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server NTP Server 1. "
|
|
-- ::= { lcsDHCPServerPoolEntry 19 }
|
|
--
|
|
--lcsDHCPServerNTPServer2 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server NTP Server 2. "
|
|
-- ::= { lcsDHCPServerPoolEntry 20 }
|
|
--
|
|
--lcsDHCPServerNTPServer3 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server NTP Server 3. "
|
|
-- ::= { lcsDHCPServerPoolEntry 21 }
|
|
--
|
|
--lcsDHCPServerNTPServer4 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server NTP Server 4. "
|
|
-- ::= { lcsDHCPServerPoolEntry 22 }
|
|
--
|
|
--lcsDHCPServerNetbiosType OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..4)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Netbios Node Type.
|
|
-- 0:None
|
|
-- 1:B-node
|
|
-- 2:P-node
|
|
-- 3:M-node
|
|
-- 4:H-node"
|
|
-- ::= { lcsDHCPServerPoolEntry 23 }
|
|
--
|
|
--lcsDHCPServerNetbiosScope OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..128))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Netbios Scope. "
|
|
-- ::= { lcsDHCPServerPoolEntry 24 }
|
|
--
|
|
--lcsDHCPServerNetbiosNameServer1 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Netbios Name Server 1. "
|
|
-- ::= { lcsDHCPServerPoolEntry 25 }
|
|
--
|
|
--lcsDHCPServerNetbiosNameServer2 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Netbios Name Server 2. "
|
|
-- ::= { lcsDHCPServerPoolEntry 26 }
|
|
--
|
|
--lcsDHCPServerNetbiosNameServer3 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Netbios Name Server 3. "
|
|
-- ::= { lcsDHCPServerPoolEntry 27 }
|
|
--
|
|
--lcsDHCPServerNetbiosNameServer4 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Netbios Name Server 4. "
|
|
-- ::= { lcsDHCPServerPoolEntry 28 }
|
|
--
|
|
--lcsDHCPServerNisDomainName OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..128))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Nis Domain Name. "
|
|
-- ::= { lcsDHCPServerPoolEntry 29 }
|
|
--
|
|
--lcsDHCPServerNisServer1 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Nis Server 1. "
|
|
-- ::= { lcsDHCPServerPoolEntry 30 }
|
|
--
|
|
--lcsDHCPServerNisServer2 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Nis Server 2. "
|
|
-- ::= { lcsDHCPServerPoolEntry 31 }
|
|
--
|
|
--lcsDHCPServerNisServer3 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Nis Server 3. "
|
|
-- ::= { lcsDHCPServerPoolEntry 32 }
|
|
--
|
|
--lcsDHCPServerNisServer4 OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Nis Server 4. "
|
|
-- ::= { lcsDHCPServerPoolEntry 33 }
|
|
--
|
|
--lcsDHCPServerClientIDType OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..2)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Client ID Type.
|
|
-- 0:None
|
|
-- 1:FQDN
|
|
-- 2:MAC"
|
|
-- ::= { lcsDHCPServerPoolEntry 34 }
|
|
--
|
|
--lcsDHCPServerClientID OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..128))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Pool Client ID. "
|
|
-- ::= { lcsDHCPServerPoolEntry 35 }
|
|
--
|
|
--lcsDHCPServerHWAddr OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..17))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Pool Hardware Address. "
|
|
-- ::= { lcsDHCPServerPoolEntry 36 }
|
|
--
|
|
--lcsDHCPServerClientName OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Pool Client Name. "
|
|
-- ::= { lcsDHCPServerPoolEntry 37 }
|
|
--
|
|
--lcsDHCPServerVendorClassID1 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 1. Please also set VendorSpecificInfo1."
|
|
-- ::= { lcsDHCPServerPoolEntry 38 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo1 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 1. Please also set VendorClassID1."
|
|
-- ::= { lcsDHCPServerPoolEntry 39 }
|
|
--
|
|
--lcsDHCPServerVendorClassID2 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 2. Please also set VendorSpecificInfo2."
|
|
-- ::= { lcsDHCPServerPoolEntry 40 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo2 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 2. Please also set VendorClassID2."
|
|
-- ::= { lcsDHCPServerPoolEntry 41 }
|
|
--
|
|
--lcsDHCPServerVendorClassID3 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 3. Please also set VendorSpecificInfo3."
|
|
-- ::= { lcsDHCPServerPoolEntry 42 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo3 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 3. Please also set VendorClassID3."
|
|
-- ::= { lcsDHCPServerPoolEntry 43 }
|
|
--
|
|
--lcsDHCPServerVendorClassID4 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 4. Please also set VendorSpecificInfo4."
|
|
-- ::= { lcsDHCPServerPoolEntry 44 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo4 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 4. Please also set VendorClassID4."
|
|
-- ::= { lcsDHCPServerPoolEntry 45 }
|
|
--
|
|
--lcsDHCPServerVendorClassID5 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 5. Please also set VendorSpecificInfo5."
|
|
-- ::= { lcsDHCPServerPoolEntry 46 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo5 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 5. Please also set VendorClassID5."
|
|
-- ::= { lcsDHCPServerPoolEntry 47 }
|
|
--
|
|
--lcsDHCPServerVendorClassID6 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 6. Please also set VendorSpecificInfo6."
|
|
-- ::= { lcsDHCPServerPoolEntry 48 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo6 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 6. Please also set VendorClassID6."
|
|
-- ::= { lcsDHCPServerPoolEntry 49 }
|
|
--
|
|
--lcsDHCPServerVendorClassID7 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 7. Please also set VendorSpecificInfo7."
|
|
-- ::= { lcsDHCPServerPoolEntry 50 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo7 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 7. Please also set VendorClassID7."
|
|
-- ::= { lcsDHCPServerPoolEntry 51 }
|
|
--
|
|
--lcsDHCPServerVendorClassID8 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..64))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Class ID 8. Please also set VendorSpecificInfo8."
|
|
-- ::= { lcsDHCPServerPoolEntry 52 }
|
|
--
|
|
--lcsDHCPServerVendorSpecificInfo8 OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (0..32))
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " DHCP Server Vendor Specific Info 8. Please also set VendorClassID8."
|
|
-- ::= { lcsDHCPServerPoolEntry 53 }
|
|
--
|
|
--lcsDHCPServerRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the status of this entry, and is
|
|
-- used to create/delete entries. Any object in an entry of
|
|
-- this table may be modified while the value of the
|
|
-- corresponding instance of this object is active(1).
|
|
-- createAndGo, notReady not supported."
|
|
-- ::= {lcsDHCPServerPoolEntry 54 }
|
|
--
|
|
--lcsDHCPServerStatistics OBJECT IDENTIFIER ::= { lcsDHCPServer 4 }
|
|
--
|
|
--lcsDHCPServerStatisticsDatabaseCountersPool OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 1 }
|
|
--
|
|
--lcsDHCPServerStatisticsDatabaseCountersExcludedIPAddress OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 2 }
|
|
--
|
|
--lcsDHCPServerStatisticsDatabaseCountersDeclinedIPAddress OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 3 }
|
|
--
|
|
--lcsDHCPServerStatisticsBindingCountersAutomaticBinding OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 4 }
|
|
--
|
|
--lcsDHCPServerStatisticsBindingCountersManualBinding OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 5 }
|
|
--
|
|
--lcsDHCPServerStatisticsBindingCountersExpiredBinding OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 6 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageReceivedCountersDISCOVER OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 7 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageReceivedCountersREQUEST OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 8 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageReceivedCountersDECLINE OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 9 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageReceivedCountersRELEASE OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 10 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageReceivedCountersINFORM OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 11 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageSentCountersOFFER OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 12 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageSentCountersACK OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 13 }
|
|
--
|
|
--lcsDHCPServerStatisticsDHCPMessageSentCountersNAK OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 14 }
|
|
--
|
|
--lcsDHCPServerClear OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "
|
|
-- "
|
|
-- ::= { lcsDHCPServerStatistics 15 }
|
|
--
|
|
--lcsDHCPServerBinding OBJECT IDENTIFIER ::= { lcsDHCPServer 5 }
|
|
--
|
|
--lcsDHCPServerBindingTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSDHCPServerBindingEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBinding 1 }
|
|
--
|
|
--lcsDHCPServerBindingEntry OBJECT-TYPE
|
|
-- SYNTAX LCSDHCPServerBindingEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- INDEX { lcsDHCPServerBindingIndex }
|
|
-- ::= { lcsDHCPServerBindingTable 1 }
|
|
--
|
|
--LCSDHCPServerBindingEntry ::= SEQUENCE {
|
|
-- lcsDHCPServerBindingIndex Integer32,
|
|
-- lcsDHCPServerBindingIP DisplayString,
|
|
-- lcsDHCPServerBindingType DisplayString,
|
|
-- lcsDHCPServerBindingState DisplayString,
|
|
-- lcsDHCPServerBindingPoolName DisplayString,
|
|
-- lcsDHCPServerBindingServerID DisplayString,
|
|
-- lcsDHCPServerBindingVLAN Integer32,
|
|
-- lcsDHCPServerBindingSubnetMask DisplayString,
|
|
-- lcsDHCPServerBindingClientIDType DisplayString,
|
|
-- lcsDHCPServerBindingClientIDValue DisplayString,
|
|
-- lcsDHCPServerBindingMACAddress DisplayString,
|
|
-- lcsDHCPServerBindingLeaseTime DisplayString,
|
|
-- lcsDHCPServerBindingWillExpiredIn DisplayString,
|
|
-- lcsDHCPServerBindingDelete Integer32
|
|
--}
|
|
--
|
|
--lcsDHCPServerBindingIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Index"
|
|
-- ::= { lcsDHCPServerBindingEntry 1 }
|
|
--
|
|
--lcsDHCPServerBindingIP OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 2 }
|
|
--
|
|
--lcsDHCPServerBindingType OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 3 }
|
|
--
|
|
--lcsDHCPServerBindingState OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 4 }
|
|
--
|
|
--lcsDHCPServerBindingPoolName OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 5 }
|
|
--
|
|
--lcsDHCPServerBindingServerID OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 6 }
|
|
--
|
|
--lcsDHCPServerBindingVLAN OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 7 }
|
|
--
|
|
--lcsDHCPServerBindingSubnetMask OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 8 }
|
|
--
|
|
--lcsDHCPServerBindingClientIDType OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 9 }
|
|
--
|
|
--lcsDHCPServerBindingClientIDValue OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 10 }
|
|
--
|
|
--lcsDHCPServerBindingMACAddress OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 11 }
|
|
--
|
|
--lcsDHCPServerBindingLeaseTime OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 12 }
|
|
--
|
|
--lcsDHCPServerBindingWillExpiredIn OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 13 }
|
|
--
|
|
--lcsDHCPServerBindingDelete OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerBindingEntry 14 }
|
|
--
|
|
--lcsDHCPServerBindingClearAutomatic OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "1:clear"
|
|
-- ::= { lcsDHCPServerBinding 2 }
|
|
--
|
|
--lcsDHCPServerBindingClearManual OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "1:clear"
|
|
-- ::= { lcsDHCPServerBinding 3 }
|
|
--
|
|
--lcsDHCPServerBindingClearExpired OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "1:clear"
|
|
-- ::= { lcsDHCPServerBinding 4 }
|
|
--
|
|
--lcsDHCPServerDeclined OBJECT IDENTIFIER ::= { lcsDHCPServer 6 }
|
|
--
|
|
--lcsDHCPServerDeclinedTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSDHCPServerDeclinedEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerDeclined 1 }
|
|
--
|
|
--lcsDHCPServerDeclinedEntry OBJECT-TYPE
|
|
-- SYNTAX LCSDHCPServerDeclinedEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- INDEX { lcsDHCPServerDeclinedIndex }
|
|
-- ::= { lcsDHCPServerDeclinedTable 1 }
|
|
--
|
|
--LCSDHCPServerDeclinedEntry ::= SEQUENCE {
|
|
-- lcsDHCPServerDeclinedIndex Integer32,
|
|
-- lcsDHCPServerDeclinedIP DisplayString
|
|
--}
|
|
--
|
|
--lcsDHCPServerDeclinedIndex OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Index"
|
|
-- ::= { lcsDHCPServerDeclinedEntry 1 }
|
|
--
|
|
--lcsDHCPServerDeclinedIP OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsDHCPServerDeclinedEntry 2 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsVLANConf OBJECT IDENTIFIER ::= { lcsSystem 10 }
|
|
|
|
lcsVLAN OBJECT IDENTIFIER ::= { lcsVLANConf 2}
|
|
|
|
lcsVlanStatus OBJECT IDENTIFIER ::= { lcsVLAN 6 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsVlan group
|
|
-- =======================================================================================================================
|
|
lcsVlanExistingVLANs OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field shows the VLANs that are created on the switch.
|
|
More VLANs may be created by using a
|
|
list syntax where the individual elements are separated by commas.
|
|
Ranges are specified with a
|
|
dash separating the lower and upper bound.
|
|
The following example will create VLANs 1, 10, 11, 12
|
|
, 13, 200, and 300: 1,10-13,200,300.
|
|
default: 1."
|
|
::= { lcsVLAN 1 }
|
|
|
|
lcsVlanEthertypeforCustomSPorts OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field specifies the ethertype/TPID (specified in hexadecimal)
|
|
used for Custom S-ports. The
|
|
setting is in force for all ports whose Port Type
|
|
is set to S-Custom-Port.
|
|
range: 0600-ffff,
|
|
default: 88a8."
|
|
::= { lcsVLAN 2 }
|
|
|
|
lcsVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure Vlan ports Configuration mode.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsVLAN 3 }
|
|
|
|
lcsVlanEntry OBJECT-TYPE
|
|
SYNTAX LCSVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsVlanTable 1 }
|
|
|
|
LCSVlanEntry ::= SEQUENCE {
|
|
lcsVlanMode INTEGER,
|
|
lcsVlanPortVLAN Integer32,
|
|
lcsVlanPortType INTEGER,
|
|
lcsVlanIngressFiltering AdminMode,
|
|
-- lcsVlanVLANTrunking AdminMode,
|
|
lcsVlanIngressAcceptance INTEGER,
|
|
lcsVlanEgressTagging INTEGER,
|
|
lcsVlanAllowedVLANs DisplayString,
|
|
lcsVlanForbiddenVLANs DisplayString
|
|
}
|
|
|
|
lcsVlanMode OBJECT-TYPE
|
|
SYNTAX INTEGER{access(0), trunk(1), hybrid(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port mode determines the fundamental
|
|
behavior of the port in question.
|
|
A port can be in one of three modes as described below.
|
|
0: access,
|
|
1: trunk,
|
|
2: hybrid."
|
|
DEFVAL { access }
|
|
::= { lcsVlanEntry 2 }
|
|
|
|
lcsVlanPortVLAN OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines the port's VLAN ID (a.k.a. PVID).
|
|
range: 1-4094,
|
|
default: 1."
|
|
::= { lcsVlanEntry 3 }
|
|
|
|
lcsVlanPortType OBJECT-TYPE
|
|
SYNTAX INTEGER { unaware(0), cPort(1), sPort(2), sCustomPort(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ports in hybrid mode allow for changing the port type,
|
|
that is, whether a frame's VLAN tag is
|
|
used to classify the frame on ingress to a particular VLAN,
|
|
and if so, which TPID it reacts on.
|
|
Likewise, on egress, the Port Type determines the
|
|
TPID of the tag, if a tag is required.
|
|
0: unaware,
|
|
1: c-Port,
|
|
2: s-Port,
|
|
3: s-Custom-Port."
|
|
DEFVAL { cPort }
|
|
::= { lcsVlanEntry 4 }
|
|
|
|
lcsVlanIngressFiltering OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hybrid ports allow for changing ingress filtering.
|
|
Access and Trunk ports always have ingress
|
|
filtering enabled.If ingress filtering is enabled,
|
|
frames classified to
|
|
a VLAN that the port is not a member of get discarded."
|
|
::= { lcsVlanEntry 5 }
|
|
|
|
-- lcsVlanVLANTrunking OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Trunk and Hybrid ports allow for enabling VLAN trunking.
|
|
-- When VLAN trunking is enabled, frames
|
|
-- classified to unknown VLANs are accepted on the port
|
|
-- whether ingress filtering is enabled or not."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsVlanEntry 6 }
|
|
|
|
lcsVlanIngressAcceptance OBJECT-TYPE
|
|
SYNTAX INTEGER { taggedAndUntagged ( 0 ),
|
|
taggedOnly ( 1 ),
|
|
untaggedOnly ( 2 )
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hybrid ports allow for changing the type of frames that are
|
|
accepted on ingress.
|
|
0: Tagged and Untagged,
|
|
1: Tagged Only,
|
|
2: Untagged Only."
|
|
::= { lcsVlanEntry 7 }
|
|
|
|
lcsVlanEgressTagging OBJECT-TYPE
|
|
SYNTAX INTEGER { untagPortVlan ( 0 ),
|
|
tagAll ( 1 ),
|
|
untagAll ( 2 )
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ports in Trunk and Hybrid mode may control the
|
|
tagging of frames on egress.
|
|
0: Untag Port VLAN,
|
|
1: Tag All,
|
|
2: Untag All."
|
|
::= { lcsVlanEntry 8 }
|
|
|
|
lcsVlanAllowedVLANs OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ports in Trunk and Hybrid mode may control which
|
|
VLANs they are allowed to become members of.
|
|
Access ports can only be member of one VLAN, the Access VLAN.
|
|
range: 1~4094.
|
|
'-': Allowed VLANs is empty."
|
|
::= { lcsVlanEntry 9 }
|
|
|
|
lcsVlanForbiddenVLANs OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port may be configured to never be member of one or
|
|
more VLANs. This is particularly useful
|
|
when dynamic VLAN protocols like MVRP and GVRP
|
|
must be prevented from dynamically adding ports
|
|
to VLANs.
|
|
range: 1~4094.
|
|
'-': Forbidden VLANs is empty."
|
|
::= { lcsVlanEntry 10 }
|
|
|
|
--lcsVLANMembershipStatusTable
|
|
|
|
lcsVLANMembershipStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVLANMembershipStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan membership Status table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsVlanStatus 1 }
|
|
|
|
lcsVLANMembershipStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSVLANMembershipStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan membership Status entry."
|
|
INDEX { ifIndex, lcsVLANMembershipVlanID }
|
|
::= { lcsVLANMembershipStatusTable 1 }
|
|
|
|
LCSVLANMembershipStatusEntry ::= SEQUENCE {
|
|
lcsVLANMembershipVlanID Integer32,
|
|
lcsVLANMembershipStatus INTEGER
|
|
}
|
|
|
|
lcsVLANMembershipVlanID OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID for which the Port members are displayed."
|
|
::= { lcsVLANMembershipStatusEntry 2 }
|
|
|
|
lcsVLANMembershipStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { portIsNotInVlan ( 0 ),
|
|
portIncludedInVlan ( 1 ),
|
|
portInForbiddenPortList( 2 ),
|
|
portInForbiddenPortListAndVlan( 3 )
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"portIsNotInVlan(0): A port is nothing in a VLAN.
|
|
portIncludedInVlan(1): A port is included in a VLAN.
|
|
portInForbiddenPortList(2): A port is in the forbidden port list.
|
|
portInForbiddenPortListAndVlan(3):
|
|
A port is in the forbidden port list and at the same
|
|
time attempted included in the VLAN."
|
|
::= { lcsVLANMembershipStatusEntry 3 }
|
|
|
|
--lcsVLANPortStatusTable
|
|
lcsVLANPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVLANPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan port status table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsVlanStatus 2 }
|
|
|
|
lcsVLANPortStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSVLANPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan port status entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsVLANPortStatusTable 1 }
|
|
|
|
LCSVLANPortStatusEntry ::= SEQUENCE {
|
|
lcsVLANPortStatusPortType DisplayString,
|
|
lcsVLANPortStatusIngressFiltering AdminMode,
|
|
lcsVLANPortStatusFrameType DisplayString,
|
|
lcsVLANPortStatusPortVLANID Integer32,
|
|
lcsVLANPortStatusTxTag DisplayString,
|
|
lcsVLANPortStatusUntaggedVLANID Integer32,
|
|
lcsVLANPortStatusConflicts DisplayString
|
|
}
|
|
|
|
lcsVLANPortStatusPortType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the port type (Unaware, C-Port, S-Port,
|
|
S-Custom-Port.) that a given user wants to configure on
|
|
the port.The field is empty if not overridden by the selected user."
|
|
::= { lcsVLANPortStatusEntry 2 }
|
|
|
|
lcsVLANPortStatusIngressFiltering OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows whether a given user wants ingress filtering enabled or not."
|
|
::= { lcsVLANPortStatusEntry 3 }
|
|
|
|
lcsVLANPortStatusFrameType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the acceptable frame types (All, Taged,
|
|
Untagged) that a given user wants to configure on the port.
|
|
The field is empty if not overridden by the selected user."
|
|
::= { lcsVLANPortStatusEntry 4 }
|
|
|
|
lcsVLANPortStatusPortVLANID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the Port VLAN ID (PVID) that a given user
|
|
wants the port to have.
|
|
The field is 0 if not overridden by the selected user."
|
|
::= { lcsVLANPortStatusEntry 5 }
|
|
|
|
lcsVLANPortStatusTxTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the Tx Tag requirements (Tag All, Tag PVID,
|
|
Tag UVID, Untag All, Untag PVID, Untag UVID)
|
|
that a given user has on a port.The field is empty
|
|
if not overridden by the selected user."
|
|
::= { lcsVLANPortStatusEntry 6 }
|
|
|
|
lcsVLANPortStatusUntaggedVLANID OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Tx Tag is overridden by the selected user and is
|
|
set to Tag or Untag UVID, then this field will show
|
|
the VLAN ID the user wants to tag or untag on egress.
|
|
The field is 0 if not overridden by the selected
|
|
user."
|
|
::= { lcsVLANPortStatusEntry 7 }
|
|
|
|
lcsVLANPortStatusConflicts OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Two users may have conflicting requirements to a port's
|
|
configuration. For instance, one user may require
|
|
all frames to be tagged on egress while another requires
|
|
all frames to be untagged on egress.Since both
|
|
users cannot win, this gives rise to a conflict,
|
|
which is solved in a prioritized way. The Administrator
|
|
has the least priority. Other software modules are
|
|
prioritized according to their position in the drop-down
|
|
list: The higher in the list, the higher priority.
|
|
If conflicts exist, it will be displayed as 'Yes'."
|
|
::= { lcsVLANPortStatusEntry 8 }
|
|
|
|
lcsMacBaesdVlanMembershipConfig OBJECT IDENTIFIER ::= { lcsVLAN 7 }
|
|
|
|
lcsMacBaesdVlanMembershipConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMacBaesdVlanMembershipConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac-Based VLAN Membership table"
|
|
::= { lcsMacBaesdVlanMembershipConfig 1 }
|
|
|
|
lcsMacBaesdVlanMembershipConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSMacBaesdVlanMembershipConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac-Based VLAN Membership table."
|
|
INDEX { lcsMacBaesdVlanMembershipConfigIndex }
|
|
::= { lcsMacBaesdVlanMembershipConfigTable 1 }
|
|
|
|
LCSMacBaesdVlanMembershipConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsMacBaesdVlanMembershipConfigIndex Integer32,
|
|
lcsMacBaesdVlanMembershipConfigMACAddress DisplayString,
|
|
lcsMacBaesdVlanMembershipConfigVLANID Integer32,
|
|
lcsMacBaesdVlanMembershipConfigPortMembers DisplayString,
|
|
lcsMacBaesdVlanMembershipConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsMacBaesdVlanMembershipConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac-Based VLAN membership index."
|
|
::= {lcsMacBaesdVlanMembershipConfigEntry 1 }
|
|
|
|
lcsMacBaesdVlanMembershipConfigMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address: xx-xx-xx-xx-xx-xx."
|
|
::= {lcsMacBaesdVlanMembershipConfigEntry 2 }
|
|
|
|
lcsMacBaesdVlanMembershipConfigVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= {lcsMacBaesdVlanMembershipConfigEntry 3 }
|
|
|
|
lcsMacBaesdVlanMembershipConfigPortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:remove or exclude the port from the mapping
|
|
1:include a port in the mapping"
|
|
::= {lcsMacBaesdVlanMembershipConfigEntry 4 }
|
|
|
|
lcsMacBaesdVlanMembershipConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsMacBaesdVlanMembershipConfigEntry 5 }
|
|
|
|
lcsMacBaesdVlanMembershipStatusUser OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC-based VLAN Membership Status User"
|
|
::= { lcsVLAN 8 }
|
|
|
|
lcsMacBaesdVlanMembershipStatus OBJECT IDENTIFIER ::= { lcsVLAN 9 }
|
|
|
|
lcsMacBaesdVlanMembershipStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMacBaesdVlanMembershipStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac-Based VLAN Membership table"
|
|
::= { lcsMacBaesdVlanMembershipStatus 1 }
|
|
|
|
lcsMacBaesdVlanMembershipStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSMacBaesdVlanMembershipStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac-Based VLAN Membership table."
|
|
INDEX { lcsMacBaesdVlanMembershipStatusIndex }
|
|
::= { lcsMacBaesdVlanMembershipStatusTable 1 }
|
|
|
|
LCSMacBaesdVlanMembershipStatusEntry ::=
|
|
SEQUENCE {
|
|
lcsMacBaesdVlanMembershipStatusIndex Integer32,
|
|
lcsMacBaesdVlanMembershipStatusMACAddress DisplayString,
|
|
lcsMacBaesdVlanMembershipStatusVLANID Integer32,
|
|
lcsMacBaesdVlanMembershipStatusPortMembers DisplayString
|
|
}
|
|
|
|
lcsMacBaesdVlanMembershipStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac-Based VLAN membership index."
|
|
::= {lcsMacBaesdVlanMembershipStatusEntry 1 }
|
|
|
|
lcsMacBaesdVlanMembershipStatusMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address: xx-xx-xx-xx-xx-xx."
|
|
::= {lcsMacBaesdVlanMembershipStatusEntry 2 }
|
|
|
|
lcsMacBaesdVlanMembershipStatusVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= {lcsMacBaesdVlanMembershipStatusEntry 3 }
|
|
|
|
lcsMacBaesdVlanMembershipStatusPortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:remove or exclude the port from the mapping
|
|
1:include a port in the mapping"
|
|
::= {lcsMacBaesdVlanMembershipStatusEntry 4 }
|
|
|
|
lcsProtocolbasedVLANConfig OBJECT IDENTIFIER ::= { lcsVLAN 10 }
|
|
|
|
lcsProtocolbasedVLANConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSProtocolbasedVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol-based VLAN Config table"
|
|
::= { lcsProtocolbasedVLANConfig 1 }
|
|
|
|
lcsProtocolbasedVLANConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSProtocolbasedVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol-based VLAN Config table"
|
|
INDEX { lcsProtocolbasedVLANConfigIndex }
|
|
::= { lcsProtocolbasedVLANConfigTable 1 }
|
|
|
|
LCSProtocolbasedVLANConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsProtocolbasedVLANConfigIndex Integer32,
|
|
lcsProtocolbasedVLANConfigFrameType Integer32,
|
|
lcsProtocolbasedVLANConfigValueEthernetEtype DisplayString,
|
|
lcsProtocolbasedVLANConfigValueSNAPOUI DisplayString,
|
|
lcsProtocolbasedVLANConfigValueSNAPPID DisplayString,
|
|
lcsProtocolbasedVLANConfigValueLLCDSAP DisplayString,
|
|
lcsProtocolbasedVLANConfigValueLLCSSAP DisplayString,
|
|
lcsProtocolbasedVLANConfigGroupName DisplayString,
|
|
lcsProtocolbasedVLANConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsProtocolbasedVLANConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol-based VLAN Config index."
|
|
::= {lcsProtocolbasedVLANConfigEntry 1 }
|
|
|
|
lcsProtocolbasedVLANConfigFrameType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Type.
|
|
1:Ethernet
|
|
2:LLC
|
|
3:SNAP"
|
|
::= {lcsProtocolbasedVLANConfigEntry 2 }
|
|
|
|
|
|
lcsProtocolbasedVLANConfigValueEthernetEtype OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ethernet Etype.
|
|
Valid values for etype range between 0x0600 and 0xffff "
|
|
::= {lcsProtocolbasedVLANConfigEntry 3 }
|
|
|
|
lcsProtocolbasedVLANConfigValueSNAPOUI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNAP OUI.
|
|
Format:xx-xx-xx"
|
|
::= {lcsProtocolbasedVLANConfigEntry 4 }
|
|
|
|
lcsProtocolbasedVLANConfigValueSNAPPID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNAP PID
|
|
Ranging between 0x00 and 0xff."
|
|
::= {lcsProtocolbasedVLANConfigEntry 5 }
|
|
|
|
lcsProtocolbasedVLANConfigValueLLCDSAP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLC DSAP.
|
|
Range: 0x00-0xff"
|
|
::= {lcsProtocolbasedVLANConfigEntry 6 }
|
|
|
|
lcsProtocolbasedVLANConfigValueLLCSSAP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLC SSAP.
|
|
Range: 0x00-0xff"
|
|
::= {lcsProtocolbasedVLANConfigEntry 7 }
|
|
|
|
lcsProtocolbasedVLANConfigGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group Name
|
|
16-character long string, unique for every entry, which consists of a combination of alphabets (a-z or A-Z) and integers(0-9)."
|
|
::= {lcsProtocolbasedVLANConfigEntry 8 }
|
|
|
|
lcsProtocolbasedVLANConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsProtocolbasedVLANConfigEntry 9 }
|
|
|
|
|
|
|
|
lcsGroupNameToVLANMappingConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSGroupNameToVLANMappingConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group Name To VLAN Mapping Config table"
|
|
::= { lcsProtocolbasedVLANConfig 2 }
|
|
|
|
lcsGroupNameToVLANMappingConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSGroupNameToVLANMappingConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group Name To VLAN Mapping Config table."
|
|
INDEX { lcsGroupNameToVLANMappingConfigIndex }
|
|
::= { lcsGroupNameToVLANMappingConfigTable 1 }
|
|
|
|
LCSGroupNameToVLANMappingConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsGroupNameToVLANMappingConfigIndex Integer32,
|
|
lcsGroupNameToVLANMappingConfigGroupName DisplayString,
|
|
lcsGroupNameToVLANMappingConfigVLANID Integer32,
|
|
lcsGroupNameToVLANMappingConfigPortMembers DisplayString,
|
|
lcsGroupNameToVLANMappingConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsGroupNameToVLANMappingConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group Name To VLAN Mapping Config index."
|
|
::= {lcsGroupNameToVLANMappingConfigEntry 1 }
|
|
|
|
lcsGroupNameToVLANMappingConfigGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group Name
|
|
16-character long string, unique for every entry, which consists of a combination of alphabets (a-z or A-Z) and integers(0-9)."
|
|
::= {lcsGroupNameToVLANMappingConfigEntry 2 }
|
|
|
|
lcsGroupNameToVLANMappingConfigVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= {lcsGroupNameToVLANMappingConfigEntry 3 }
|
|
|
|
lcsGroupNameToVLANMappingConfigPortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:remove or exclude the port from the mapping
|
|
1:include a port in the mapping"
|
|
::= {lcsGroupNameToVLANMappingConfigEntry 4 }
|
|
|
|
lcsGroupNameToVLANMappingConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsGroupNameToVLANMappingConfigEntry 5 }
|
|
|
|
lcsIPSubnetBasedVLANConfig OBJECT IDENTIFIER ::= { lcsVLAN 11 }
|
|
|
|
lcsIPSubnetBasedVLANConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPSubnetBasedVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Subnet Based VLAN Config table"
|
|
::= { lcsIPSubnetBasedVLANConfig 1 }
|
|
|
|
lcsIPSubnetBasedVLANConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSIPSubnetBasedVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Subnet Based VLAN Config table."
|
|
INDEX { lcsIPSubnetBasedVLANConfigIndex }
|
|
::= { lcsIPSubnetBasedVLANConfigTable 1 }
|
|
|
|
LCSIPSubnetBasedVLANConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsIPSubnetBasedVLANConfigIndex Integer32,
|
|
lcsIPSubnetBasedVLANConfigIPAddress IpAddress,
|
|
lcsIPSubnetBasedVLANConfigMaskLength Integer32,
|
|
lcsIPSubnetBasedVLANConfigGroupName DisplayString,
|
|
lcsIPSubnetBasedVLANConfigVLANID Integer32,
|
|
lcsIPSubnetBasedVLANConfigPortMembers DisplayString,
|
|
lcsIPSubnetBasedVLANConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsIPSubnetBasedVLANConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Subnet Based VLAN Config index."
|
|
::= {lcsIPSubnetBasedVLANConfigEntry 1 }
|
|
|
|
lcsIPSubnetBasedVLANConfigIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet's IP address"
|
|
::= {lcsIPSubnetBasedVLANConfigEntry 2 }
|
|
|
|
lcsIPSubnetBasedVLANConfigMaskLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet's mask length. "
|
|
::= {lcsIPSubnetBasedVLANConfigEntry 3 }
|
|
|
|
lcsIPSubnetBasedVLANConfigVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= {lcsIPSubnetBasedVLANConfigEntry 4 }
|
|
|
|
lcsIPSubnetBasedVLANConfigPortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:remove or exclude the port from the mapping
|
|
1:include a port in the mapping"
|
|
::= {lcsIPSubnetBasedVLANConfigEntry 5 }
|
|
|
|
lcsIPSubnetBasedVLANConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsIPSubnetBasedVLANConfigEntry 6 }
|
|
|
|
lcsVLANNameConfig OBJECT IDENTIFIER ::= { lcsVLAN 12 }
|
|
|
|
lcsVLANNameConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVLANNameConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Name Config table"
|
|
::= { lcsVLANNameConfig 1 }
|
|
|
|
lcsVLANNameConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSVLANNameConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Name Config table."
|
|
INDEX { lcsVLANNameConfigIndex }
|
|
::= { lcsVLANNameConfigTable 1 }
|
|
|
|
LCSVLANNameConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsVLANNameConfigIndex Integer32,
|
|
lcsVLANNameConfigVLANName DisplayString
|
|
}
|
|
|
|
lcsVLANNameConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Name Config index."
|
|
::= {lcsVLANNameConfigEntry 1 }
|
|
|
|
lcsVLANNameConfigVLANName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Name."
|
|
::= {lcsVLANNameConfigEntry 2 }
|
|
|
|
|
|
lcsNTPConf OBJECT IDENTIFIER ::= { lcsSystem 12 }
|
|
|
|
lcsNTPConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {useLocal(0),useNTP(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system NTP Mode.
|
|
useLocal(0) : Use Local Settings,
|
|
useNTP(1) : Use NTP Server."
|
|
DEFVAL { useLocal }
|
|
::= { lcsNTPConf 1 }
|
|
|
|
--lcsNTPConfigAutomatic OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the Automatic mode operation. Possible modes are:
|
|
-- 0:Disable, NTP servers available from the config.
|
|
-- 1:Enable, NTP servers available from the DHCP."
|
|
-- ::= { lcsNTPConf 2 }
|
|
|
|
lcsNTPConfigTimeSyncInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (5|10|15|30|60|120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time-Sync Interval.
|
|
Valid values are restricted to 5,10,15,30,60,120 minutes. "
|
|
::= { lcsNTPConf 3 }
|
|
|
|
lcsNTPConfigServerAddress1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide the IPv4 or IPv6 address of a NTP server."
|
|
::= { lcsNTPConf 4 }
|
|
|
|
lcsNTPConfigServerAddress2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide the IPv4 or IPv6 address of a NTP server."
|
|
::= { lcsNTPConf 5 }
|
|
|
|
lcsNTPConfigServerAddress3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide the IPv4 or IPv6 address of a NTP server."
|
|
::= { lcsNTPConf 6 }
|
|
|
|
lcsNTPConfigServerAddress4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide the IPv4 or IPv6 address of a NTP server."
|
|
::= { lcsNTPConf 7 }
|
|
|
|
lcsNTPConfigServerAddress5 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide the IPv4 or IPv6 address of a NTP server."
|
|
::= { lcsNTPConf 8 }
|
|
|
|
|
|
-- =======================================================================================================================
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.2
|
|
lcsConfiguration OBJECT IDENTIFIER ::= { lcosSX 2 }
|
|
|
|
lcsPort OBJECT IDENTIFIER ::= { lcsConfiguration 1 }
|
|
|
|
lcsPortConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPortConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show port configurations. "
|
|
::= { lcsPort 1 }
|
|
|
|
lcsPortConfigurationEntry OBJECT-TYPE
|
|
SYNTAX LCSPortConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPortConfPort }
|
|
::= { lcsPortConfigurationTable 1 }
|
|
|
|
LCSPortConfigurationEntry ::= SEQUENCE {
|
|
lcsPortConfPort Integer32,
|
|
lcsPortConfDescription DisplayString,
|
|
lcsPortConfLink DisplayString,
|
|
lcsPortConfSpeedStatus DisplayString,
|
|
lcsPortConfSpeedMode Integer32,
|
|
lcsPortConfFlowControlRxStatus Integer32,
|
|
lcsPortConfFlowControlTxStatus Integer32,
|
|
lcsPortConfFlowControlMode Integer32,
|
|
lcsPortConfMaximumFrameSize Integer32
|
|
-- lcsPortConfExcessiveCollisionMode Integer32,
|
|
-- lcsPortConfPowerControl Integer32,
|
|
-- lcsPortConfPortMedia DisplayString
|
|
}
|
|
|
|
lcsPortConfPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port, range : 1 - port number. "
|
|
::= { lcsPortConfigurationEntry 1 }
|
|
|
|
lcsPortConfDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Interface specific description.
|
|
Up to 47 characters describing this interface. "
|
|
::= { lcsPortConfigurationEntry 2 }
|
|
|
|
lcsPortConfLink OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (2..4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The current link state. "
|
|
::= { lcsPortConfigurationEntry 3 }
|
|
|
|
lcsPortConfSpeedStatus OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (6..12))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The current link speed of the port. "
|
|
::= { lcsPortConfigurationEntry 4 }
|
|
|
|
lcsPortConfSpeedMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0..19)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: disable state,
|
|
1: auto,
|
|
2: 10 Half,
|
|
3: 10 Full,
|
|
4: 100 Half,
|
|
5: 100 Full,
|
|
6: 1G full,
|
|
7: SFP_Auto_AMS,
|
|
8: 100FX_AMS,
|
|
9: 1000X_AMS,
|
|
10: 100-FX,
|
|
11: 1000-X,
|
|
12: 10G Full,
|
|
13: Auto (2.5G/1G),
|
|
14: Auto (2.5G/100M),
|
|
15: Auto (2.5G),
|
|
16: Auto (1G/100M),
|
|
17: Auto (1G),
|
|
18: Auto (100M),
|
|
19: 2.5G Full."
|
|
::= { lcsPortConfigurationEntry 5 }
|
|
|
|
lcsPortConfFlowControlRxStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: disable
|
|
1: enable
|
|
2: not support. "
|
|
::= { lcsPortConfigurationEntry 6 }
|
|
|
|
lcsPortConfFlowControlTxStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: disable
|
|
1: enable
|
|
2: not support. "
|
|
::= { lcsPortConfigurationEntry 7 }
|
|
|
|
lcsPortConfFlowControlMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0,
|
|
0: disable
|
|
1: enable
|
|
2: not support. "
|
|
::= { lcsPortConfigurationEntry 8 }
|
|
|
|
lcsPortConfMaximumFrameSize OBJECT-TYPE
|
|
SYNTAX Integer32 (1518..10240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 10240 , range : 1518 - 10240 "
|
|
::= { lcsPortConfigurationEntry 9 }
|
|
|
|
--lcsPortConfExcessiveCollisionMode OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0,
|
|
-- Excessive Collision Mode :
|
|
-- 0: Discard,
|
|
-- 1: Restart,
|
|
-- 2: not support.
|
|
-- "
|
|
-- ::= { lcsPortConfigurationEntry 10 }
|
|
|
|
--lcsPortConfPowerControl OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0..3)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0,
|
|
-- PowerControl :
|
|
-- 0: disable,
|
|
-- 1: Actiphy,
|
|
-- 2: Dynamic (perfectReach),
|
|
-- 3: Enable,
|
|
-- 4: not support.
|
|
-- "
|
|
-- ::= { lcsPortConfigurationEntry 11 }
|
|
|
|
--lcsPortConfPortMedia OBJECT-TYPE
|
|
-- SYNTAX DisplayString(SIZE (1..4))
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Show port media. "
|
|
-- ::= { lcsPortConfigurationEntry 12 }
|
|
|
|
|
|
lcsPortTrafficStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPortTrafficStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPort 2 }
|
|
|
|
lcsPortTrafficStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LCSPortTrafficStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPortTrafficStatisticsPort }
|
|
::= { lcsPortTrafficStatisticsTable 1 }
|
|
|
|
LCSPortTrafficStatisticsEntry ::= SEQUENCE {
|
|
lcsPortTrafficStatisticsPort Integer32,
|
|
lcsPortTrafficStatisticsClear Integer32,
|
|
lcsPortTrafficRxPackets Counter64,
|
|
lcsPortTrafficRxOctets Counter64,
|
|
lcsPortTrafficRxUnicast Counter64,
|
|
lcsPortTrafficRxMulticast Counter64,
|
|
lcsPortTrafficRxBroadcast Counter64,
|
|
lcsPortTrafficRxPause Counter64,
|
|
lcsPortTrafficRx64Bytes Counter64,
|
|
lcsPortTrafficRx65to127Bytes Counter64,
|
|
lcsPortTrafficRx128to255Bytes Counter64,
|
|
lcsPortTrafficRx256to511Bytes Counter64,
|
|
lcsPortTrafficRx512to1023Bytes Counter64,
|
|
lcsPortTrafficRx1024to1526Bytes Counter64,
|
|
lcsPortTrafficRxExceecd1527Bytes Counter64,
|
|
lcsPortTrafficRxQ0 Counter64,
|
|
lcsPortTrafficRxQ1 Counter64,
|
|
lcsPortTrafficRxQ2 Counter64,
|
|
lcsPortTrafficRxQ3 Counter64,
|
|
lcsPortTrafficRxQ4 Counter64,
|
|
lcsPortTrafficRxQ5 Counter64,
|
|
lcsPortTrafficRxQ6 Counter64,
|
|
lcsPortTrafficRxQ7 Counter64,
|
|
lcsPortTrafficRxDrops Counter64,
|
|
lcsPortTrafficRxCRCorAlignment Counter64,
|
|
lcsPortTrafficRxUndersize Counter64,
|
|
lcsPortTrafficRxOversize Counter64,
|
|
lcsPortTrafficRxFragments Counter64,
|
|
lcsPortTrafficRxJabber Counter64,
|
|
lcsPortTrafficRxFiltered Counter64,
|
|
lcsPortTrafficTxPackets Counter64,
|
|
lcsPortTrafficTxOctets Counter64,
|
|
lcsPortTrafficTxUnicast Counter64,
|
|
lcsPortTrafficTxMulticast Counter64,
|
|
lcsPortTrafficTxBroadcast Counter64,
|
|
lcsPortTrafficTxPause Counter64,
|
|
lcsPortTrafficTx64Bytes Counter64,
|
|
lcsPortTrafficTx65to127Bytes Counter64,
|
|
lcsPortTrafficTx128to255Bytes Counter64,
|
|
lcsPortTrafficTx256to511Bytes Counter64,
|
|
lcsPortTrafficTx512to1023Bytes Counter64,
|
|
lcsPortTrafficTx1024to1526Bytes Counter64,
|
|
lcsPortTrafficTxExceecd1527Bytes Counter64,
|
|
lcsPortTrafficTxQ0 Counter64,
|
|
lcsPortTrafficTxQ1 Counter64,
|
|
lcsPortTrafficTxQ2 Counter64,
|
|
lcsPortTrafficTxQ3 Counter64,
|
|
lcsPortTrafficTxQ4 Counter64,
|
|
lcsPortTrafficTxQ5 Counter64,
|
|
lcsPortTrafficTxQ6 Counter64,
|
|
lcsPortTrafficTxQ7 Counter64,
|
|
lcsPortTrafficTxDrops Counter64,
|
|
lcsPortTrafficTxLateOrExcColl Counter64
|
|
}
|
|
|
|
lcsPortTrafficStatisticsPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 1 }
|
|
|
|
lcsPortTrafficStatisticsClear OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 2 }
|
|
|
|
lcsPortTrafficRxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 3 }
|
|
|
|
lcsPortTrafficRxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 4 }
|
|
|
|
lcsPortTrafficRxUnicast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 5 }
|
|
|
|
lcsPortTrafficRxMulticast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 6 }
|
|
|
|
lcsPortTrafficRxBroadcast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 7 }
|
|
|
|
lcsPortTrafficRxPause OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 8 }
|
|
|
|
lcsPortTrafficRx64Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 9 }
|
|
|
|
lcsPortTrafficRx65to127Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 10 }
|
|
|
|
lcsPortTrafficRx128to255Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 11 }
|
|
|
|
lcsPortTrafficRx256to511Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 12 }
|
|
|
|
lcsPortTrafficRx512to1023Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 13 }
|
|
|
|
lcsPortTrafficRx1024to1526Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 14 }
|
|
|
|
lcsPortTrafficRxExceecd1527Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 15 }
|
|
|
|
lcsPortTrafficRxQ0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 16 }
|
|
|
|
lcsPortTrafficRxQ1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 17 }
|
|
|
|
lcsPortTrafficRxQ2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 18 }
|
|
|
|
lcsPortTrafficRxQ3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 19 }
|
|
|
|
lcsPortTrafficRxQ4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 20 }
|
|
|
|
lcsPortTrafficRxQ5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 21 }
|
|
|
|
lcsPortTrafficRxQ6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 22 }
|
|
|
|
lcsPortTrafficRxQ7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 23 }
|
|
|
|
lcsPortTrafficRxDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 24 }
|
|
|
|
lcsPortTrafficRxCRCorAlignment OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 25 }
|
|
|
|
lcsPortTrafficRxUndersize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 26 }
|
|
|
|
lcsPortTrafficRxOversize OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 27 }
|
|
|
|
lcsPortTrafficRxFragments OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 28 }
|
|
|
|
lcsPortTrafficRxJabber OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 29 }
|
|
|
|
lcsPortTrafficRxFiltered OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 30 }
|
|
|
|
lcsPortTrafficTxPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 31 }
|
|
|
|
lcsPortTrafficTxOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 32 }
|
|
|
|
lcsPortTrafficTxUnicast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 33 }
|
|
|
|
lcsPortTrafficTxMulticast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 34 }
|
|
|
|
lcsPortTrafficTxBroadcast OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 35 }
|
|
|
|
lcsPortTrafficTxPause OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 36 }
|
|
|
|
lcsPortTrafficTx64Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 37 }
|
|
|
|
lcsPortTrafficTx65to127Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 38 }
|
|
|
|
lcsPortTrafficTx128to255Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 39 }
|
|
|
|
lcsPortTrafficTx256to511Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 40 }
|
|
|
|
lcsPortTrafficTx512to1023Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 41 }
|
|
|
|
lcsPortTrafficTx1024to1526Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 42 }
|
|
|
|
lcsPortTrafficTxExceecd1527Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 43 }
|
|
|
|
lcsPortTrafficTxQ0 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 44 }
|
|
|
|
lcsPortTrafficTxQ1 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 45 }
|
|
|
|
lcsPortTrafficTxQ2 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 46 }
|
|
|
|
lcsPortTrafficTxQ3 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 47 }
|
|
|
|
lcsPortTrafficTxQ4 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 48 }
|
|
|
|
lcsPortTrafficTxQ5 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 49 }
|
|
|
|
lcsPortTrafficTxQ6 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 50 }
|
|
|
|
|
|
lcsPortTrafficTxQ7 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 51 }
|
|
|
|
lcsPortTrafficTxDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 52 }
|
|
|
|
lcsPortTrafficTxLateOrExcColl OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortTrafficStatisticsEntry 53 }
|
|
|
|
|
|
lcsPortQoSStatistics OBJECT IDENTIFIER ::= { lcsPort 3 }
|
|
|
|
lcsPortQoSStatisticsClear OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: none
|
|
1: clear "
|
|
::= { lcsPortQoSStatistics 1 }
|
|
|
|
lcsPortQoSStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPortQoSStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatistics 2 }
|
|
|
|
lcsPortQoSStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LCSPortQoSStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPortQoSStatisticsPort }
|
|
::= { lcsPortQoSStatisticsTable 1 }
|
|
|
|
LCSPortQoSStatisticsEntry ::= SEQUENCE {
|
|
lcsPortQoSStatisticsPort Integer32,
|
|
lcsPortQoSQ0Rx Counter64,
|
|
lcsPortQoSQ0Tx Counter64,
|
|
lcsPortQoSQ1Rx Counter64,
|
|
lcsPortQoSQ1Tx Counter64,
|
|
lcsPortQoSQ2Rx Counter64,
|
|
lcsPortQoSQ2Tx Counter64,
|
|
lcsPortQoSQ3Rx Counter64,
|
|
lcsPortQoSQ3Tx Counter64,
|
|
lcsPortQoSQ4Rx Counter64,
|
|
lcsPortQoSQ4Tx Counter64,
|
|
lcsPortQoSQ5Rx Counter64,
|
|
lcsPortQoSQ5Tx Counter64,
|
|
lcsPortQoSQ6Rx Counter64,
|
|
lcsPortQoSQ6Tx Counter64,
|
|
lcsPortQoSQ7Rx Counter64,
|
|
lcsPortQoSQ7Tx Counter64
|
|
}
|
|
|
|
lcsPortQoSStatisticsPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 1 }
|
|
|
|
lcsPortQoSQ0Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 2 }
|
|
|
|
lcsPortQoSQ0Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 3 }
|
|
|
|
lcsPortQoSQ1Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 4 }
|
|
|
|
lcsPortQoSQ1Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 5 }
|
|
|
|
lcsPortQoSQ2Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 6 }
|
|
|
|
lcsPortQoSQ2Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 7 }
|
|
|
|
lcsPortQoSQ3Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 8 }
|
|
|
|
lcsPortQoSQ3Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 9 }
|
|
|
|
lcsPortQoSQ4Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 10 }
|
|
|
|
lcsPortQoSQ4Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 11 }
|
|
|
|
lcsPortQoSQ5Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 12 }
|
|
|
|
lcsPortQoSQ5Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 13 }
|
|
|
|
lcsPortQoSQ6Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 14 }
|
|
|
|
lcsPortQoSQ6Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 15 }
|
|
|
|
lcsPortQoSQ7Rx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 16 }
|
|
|
|
lcsPortQoSQ7Tx OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortQoSStatisticsEntry 17 }
|
|
|
|
lcsSFPInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSFPInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPort 4 }
|
|
|
|
lcsSFPInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSSFPInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsSFPInfoIndex }
|
|
::= { lcsSFPInfoTable 1 }
|
|
|
|
LCSSFPInfoEntry ::= SEQUENCE {
|
|
lcsSFPInfoIndex Integer32,
|
|
lcsSFPInfoPort DisplayString,
|
|
lcsSFPConnectorType DisplayString,
|
|
lcsSFPFiberType DisplayString,
|
|
lcsSFPTxCentralWavelength DisplayString,
|
|
lcsSFPBaudRate DisplayString,
|
|
lcsSFPVendorOUI DisplayString,
|
|
lcsSFPVendorName DisplayString,
|
|
lcsSFPVendorPN DisplayString,
|
|
lcsSFPVendorRev DisplayString,
|
|
lcsSFPVendorSN DisplayString,
|
|
lcsSFPDateCode DisplayString,
|
|
lcsSFPTemperature DisplayString,
|
|
lcsSFPVcc DisplayString,
|
|
lcsSFPMon1Bias DisplayString,
|
|
lcsSFPMon2TxPWR DisplayString,
|
|
lcsSFPMon3RxPWR DisplayString
|
|
}
|
|
|
|
lcsSFPInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 1 }
|
|
|
|
lcsSFPInfoPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 2 }
|
|
|
|
lcsSFPConnectorType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 3 }
|
|
|
|
lcsSFPFiberType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 4 }
|
|
|
|
lcsSFPTxCentralWavelength OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 5 }
|
|
|
|
lcsSFPBaudRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 6 }
|
|
|
|
lcsSFPVendorOUI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 7 }
|
|
|
|
lcsSFPVendorName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 8 }
|
|
|
|
lcsSFPVendorPN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 9 }
|
|
|
|
lcsSFPVendorRev OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 10 }
|
|
|
|
lcsSFPVendorSN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 11 }
|
|
|
|
lcsSFPDateCode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 12 }
|
|
|
|
lcsSFPTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 13 }
|
|
|
|
lcsSFPVcc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 14 }
|
|
|
|
lcsSFPMon1Bias OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 15 }
|
|
|
|
lcsSFPMon2TxPWR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 16 }
|
|
|
|
lcsSFPMon3RxPWR OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsSFPInfoEntry 17 }
|
|
|
|
|
|
lcsVoiceVLAN OBJECT IDENTIFIER ::= { lcsConfiguration 2 }
|
|
|
|
lcsVoiceVLANConf OBJECT IDENTIFIER ::= { lcsVoiceVLAN 1 }
|
|
|
|
lcsVoiceVLANMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Voice VLAN mode operation.
|
|
default: 0,
|
|
0: disable
|
|
1: enable"
|
|
::= { lcsVoiceVLANConf 1 }
|
|
|
|
lcsVoiceVLANVLANId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Voice VLAN ID.
|
|
default: 1000,
|
|
range : 1-4094. "
|
|
::= { lcsVoiceVLANConf 2 }
|
|
|
|
lcsVoiceVLANAgingTime OBJECT-TYPE
|
|
SYNTAX Integer32 (10..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Voice VLAN secure learning aging time.
|
|
default: 86400,
|
|
range : 10 - 10000000. "
|
|
::= { lcsVoiceVLANConf 3 }
|
|
|
|
lcsVoiceVLANTrafficClass OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Voice VLAN traffic class, all traffic on the Voice VLAN
|
|
will apply this class, available value is from 0(Low)
|
|
to 7(High).
|
|
default: 7. "
|
|
::= { lcsVoiceVLANConf 4 }
|
|
|
|
|
|
lcsVoiceVLANPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVoiceVLANPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show Voice Vlan configuration. "
|
|
::= { lcsVoiceVLANConf 5 }
|
|
|
|
lcsVoiceVLANPortEntry OBJECT-TYPE
|
|
SYNTAX LCSVoiceVLANPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsVoiceVLANPort }
|
|
::= { lcsVoiceVLANPortTable 1 }
|
|
|
|
LCSVoiceVLANPortEntry ::= SEQUENCE {
|
|
lcsVoiceVLANPort Integer32,
|
|
lcsVoiceVLANPortMode Integer32,
|
|
lcsVoiceVLANPortSecurity Integer32,
|
|
lcsVoiceVLANPortDiscoveryProtocol Integer32
|
|
}
|
|
|
|
lcsVoiceVLANPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port, range : 1 - port number. "
|
|
::= { lcsVoiceVLANPortEntry 1 }
|
|
|
|
lcsVoiceVLANPortMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Voice VLAN port mode.
|
|
default: 0,
|
|
0: Disable (Disjoin from Voice VLAN.)
|
|
1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.)
|
|
2: Forced (Force join to Voice VLAN.)"
|
|
::= { lcsVoiceVLANPortEntry 2 }
|
|
|
|
lcsVoiceVLANPortSecurity OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Voice VLAN port security mode.
|
|
default: 0,
|
|
0: Disable (Disjoin from Voice VLAN.)
|
|
1: enable ( Enable Voice VLAN security mode. When the function is
|
|
enabled, all non-telephone MAC address in Voice VLAN
|
|
will be blocked 10 seconds.)"
|
|
::= { lcsVoiceVLANPortEntry 3 }
|
|
|
|
lcsVoiceVLANPortDiscoveryProtocol OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Voice VLAN port discovery protocol.
|
|
default: 0
|
|
0: OUI (Detect telephony device by OUI address.)
|
|
1: LLDP (Detect telephony device by LLDP.)
|
|
2: Both (Both OUI and LLDP.) "
|
|
::= { lcsVoiceVLANPortEntry 4 }
|
|
|
|
|
|
lcsVoiceVLANOUI OBJECT IDENTIFIER ::= { lcsVoiceVLAN 2 }
|
|
|
|
lcsVoiceVLANOUICreate OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0 : None (read only)
|
|
1 : Create an OUI entry"
|
|
::= { lcsVoiceVLANOUI 1 }
|
|
|
|
lcsVoiceVLANOUITable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVoiceVLANOUIEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Create Voice VLAN OUI entry. Modify OUI table will
|
|
restart auto detect OUI process. "
|
|
::= { lcsVoiceVLANOUI 2 }
|
|
|
|
lcsVoiceVLANOUIEntry OBJECT-TYPE
|
|
SYNTAX LCSVoiceVLANOUIEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsVoiceVLANOUIIndex }
|
|
::= { lcsVoiceVLANOUITable 1 }
|
|
|
|
LCSVoiceVLANOUIEntry ::= SEQUENCE {
|
|
lcsVoiceVLANOUIIndex Integer32,
|
|
lcsVoiceVLANTelephonyOUI DisplayString,
|
|
lcsVoiceVLANDescription DisplayString,
|
|
lcsVoiceVLANOUIRowStatus RowStatus
|
|
}
|
|
|
|
lcsVoiceVLANOUIIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsVoiceVLANOUIEntry 1 }
|
|
|
|
lcsVoiceVLANTelephonyOUI OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OUI address, format : 0a 1b 2c "
|
|
::= { lcsVoiceVLANOUIEntry 2 }
|
|
|
|
lcsVoiceVLANDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 32 characters describing OUI address. "
|
|
::= { lcsVoiceVLANOUIEntry 3 }
|
|
|
|
lcsVoiceVLANOUIRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is used
|
|
to create/delete entries. Any object in an entry of this table
|
|
may be modified while the value of the corresponding instance
|
|
of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsVoiceVLANOUIEntry 4 }
|
|
|
|
--lcsGARP OBJECT IDENTIFIER ::= { lcsConfiguration 3 }
|
|
|
|
--lcsGARPConfTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSGARPConfEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsGARP 1 }
|
|
|
|
--lcsGARPConfEntry OBJECT-TYPE
|
|
-- SYNTAX LCSGARPConfEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- INDEX { lcsGARPConfPort }
|
|
-- ::= { lcsGARPConfTable 1 }
|
|
|
|
--LCSGARPConfEntry ::= SEQUENCE {
|
|
-- lcsGARPConfPort Integer32,
|
|
-- lcsGARPJoinTimer Integer32,
|
|
-- lcsGARPLeaveTimer Integer32,
|
|
-- lcsGARPLeaveAllTimer Integer32,
|
|
-- lcsGARPApplicantion Integer32,
|
|
-- lcsGARPAttributeType Integer32,
|
|
-- lcsGARPApplicant Integer32
|
|
--}
|
|
|
|
--lcsGARPConfPort OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..4094)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsGARPConfEntry 1 }
|
|
|
|
--lcsGARPJoinTimer OBJECT-TYPE
|
|
-- SYNTAX Integer32 (200..1000)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 200, range : 200 - 1000 "
|
|
-- ::= { lcsGARPConfEntry 2 }
|
|
|
|
--lcsGARPLeaveTimer OBJECT-TYPE
|
|
-- SYNTAX Integer32 (600..3000)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 600 , range : 600 - 3000"
|
|
-- ::= { lcsGARPConfEntry 3 }
|
|
|
|
--lcsGARPLeaveAllTimer OBJECT-TYPE
|
|
-- SYNTAX Integer32 (10000..50000)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 10000, range : 10000 - 50000 "
|
|
-- ::= { lcsGARPConfEntry 4 }
|
|
|
|
--lcsGARPApplicantion OBJECT-TYPE
|
|
-- SYNTAX Integer32(1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 1
|
|
-- 1: GVRP"
|
|
-- ::= { lcsGARPConfEntry 5 }
|
|
|
|
--lcsGARPAttributeType OBJECT-TYPE
|
|
-- SYNTAX Integer32(1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 1
|
|
-- 1: VLAN"
|
|
-- ::= { lcsGARPConfEntry 6 }
|
|
|
|
--lcsGARPApplicant OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0
|
|
-- 0: normal-participant
|
|
-- 1: non-participant"
|
|
-- ::= { lcsGARPConfEntry 7 }
|
|
|
|
--lcsGARPStatisticsTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSGARPStatisticsEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Show the basic GARP port statistics. "
|
|
-- ::= { lcsGARP 2 }
|
|
|
|
--lcsGARPStatisticsEntry OBJECT-TYPE
|
|
-- SYNTAX LCSGARPStatisticsEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- INDEX { lcsGARPStatisticsPort }
|
|
-- ::= { lcsGARPStatisticsTable 1 }
|
|
|
|
--LCSGARPStatisticsEntry ::= SEQUENCE {
|
|
-- lcsGARPStatisticsPort Integer32,
|
|
-- lcsGARPStatisticsPeerMAC DisplayString,
|
|
-- lcsGARPStatisticsFailedCount Counter32
|
|
--}
|
|
|
|
--lcsGARPStatisticsPort OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..4094)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " port, range : 1 - port number. "
|
|
-- ::= { lcsGARPStatisticsEntry 1 }
|
|
|
|
--lcsGARPStatisticsPeerMAC OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Peer MAC is MAC address of the neighbour Switch from with GARP frame is received. "
|
|
-- ::= { lcsGARPStatisticsEntry 2 }
|
|
|
|
--lcsGARPStatisticsFailedCount OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " explain Failed count here. "
|
|
-- ::= { lcsGARPStatisticsEntry 3 }
|
|
|
|
lcsGVRP OBJECT IDENTIFIER ::= { lcsConfiguration 4 }
|
|
|
|
lcsGVRPConf OBJECT IDENTIFIER ::= { lcsGVRP 1 }
|
|
|
|
lcsGVRPMode OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0,
|
|
0: disable,
|
|
1: enable. "
|
|
::= { lcsGVRPConf 1 }
|
|
|
|
lcsGVRPMaxVlan OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of simultaniously VLANs that GVRP can control. "
|
|
::= { lcsGVRPConf 2 }
|
|
|
|
lcsGVRPJoinTime OBJECT-TYPE
|
|
SYNTAX Integer32(1..20)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"join-time in units of centi seconds. Range is 1-20. Default is 20. "
|
|
::= { lcsGVRPConf 3 }
|
|
|
|
lcsGVRPLeaveTime OBJECT-TYPE
|
|
SYNTAX Integer32(60..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"leave-time in units of centi seconds. Range is 60-300. Default is 60. "
|
|
::= { lcsGVRPConf 4 }
|
|
|
|
lcsGVRPLeaveAllTime OBJECT-TYPE
|
|
SYNTAX Integer32(1000..5000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"leave-all-time in units of centi seconds Range is 1000-5000. Default is 1000"
|
|
::= { lcsGVRPConf 5 }
|
|
|
|
lcsGVRPConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSGVRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsGVRPConf 6 }
|
|
|
|
lcsGVRPConfEntry OBJECT-TYPE
|
|
SYNTAX LCSGVRPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsGVRPConfPort }
|
|
::= { lcsGVRPConfTable 1 }
|
|
|
|
LCSGVRPConfEntry ::= SEQUENCE {
|
|
lcsGVRPConfPort Integer32,
|
|
lcsGVRPConfPortMode Integer32
|
|
-- lcsGVRPConfPortRRole Integer32
|
|
}
|
|
|
|
lcsGVRPConfPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsGVRPConfEntry 1 }
|
|
|
|
lcsGVRPConfPortMode OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
1: enable
|
|
0: disable"
|
|
::= { lcsGVRPConfEntry 2 }
|
|
|
|
--lcsGVRPConfPortRRole OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0
|
|
-- 1: enable
|
|
-- 0: disable"
|
|
-- ::= { lcsGVRPConfEntry 3 }
|
|
|
|
--lcsGVRPStatisticsTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSGVRPStatisticsEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsGVRP 2 }
|
|
|
|
--lcsGVRPStatisticsEntry OBJECT-TYPE
|
|
-- SYNTAX LCSGVRPStatisticsEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- INDEX { lcsGVRPStatisticsPort }
|
|
-- ::= { lcsGVRPStatisticsTable 1 }
|
|
|
|
--LCSGVRPStatisticsEntry ::= SEQUENCE {
|
|
-- lcsGVRPStatisticsPort Integer32,
|
|
-- lcsGVRPStatisticsJoinTxCnt Counter32,
|
|
-- lcsGVRPStatisticsLeaveTxCnt Counter32
|
|
--}
|
|
|
|
--lcsGVRPStatisticsPort OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..4094)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsGVRPStatisticsEntry 1 }
|
|
|
|
--lcsGVRPStatisticsJoinTxCnt OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsGVRPStatisticsEntry 2 }
|
|
|
|
--lcsGVRPStatisticsLeaveTxCnt OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { lcsGVRPStatisticsEntry 3 }
|
|
|
|
|
|
lcsMirroring OBJECT IDENTIFIER ::= { lcsConfiguration 6 }
|
|
|
|
lcsMonitorSession OBJECT-TYPE
|
|
SYNTAX Integer32(1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Monitor session."
|
|
::= { lcsMirroring 1 }
|
|
|
|
lcsPortToMirrorOn OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable,
|
|
range : 1 - port number. "
|
|
::= { lcsMirroring 2 }
|
|
|
|
lcsMirrorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMirrorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMirroring 3 }
|
|
|
|
lcsMirrorEntry OBJECT-TYPE
|
|
SYNTAX LCSMirrorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMirrorPort }
|
|
::= { lcsMirrorTable 1 }
|
|
|
|
LCSMirrorEntry ::= SEQUENCE {
|
|
lcsMirrorPort Integer32,
|
|
lcsMirrorMode Integer32
|
|
}
|
|
|
|
lcsMirrorPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMirrorEntry 1 }
|
|
|
|
lcsMirrorMode OBJECT-TYPE
|
|
SYNTAX Integer32(0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: rx only
|
|
2: tx only
|
|
3: enable
|
|
Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored"
|
|
::= { lcsMirrorEntry 2 }
|
|
|
|
lcsTrapEventSeverity OBJECT IDENTIFIER ::= { lcsConfiguration 7 }
|
|
|
|
lcsTrapEventSeverityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSTrapEventSeverityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsTrapEventSeverity 1 }
|
|
|
|
lcsTrapEventSeverityEntry OBJECT-TYPE
|
|
SYNTAX LCSTrapEventSeverityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsTrapEventSeverityIndex }
|
|
::= { lcsTrapEventSeverityTable 1 }
|
|
|
|
LCSTrapEventSeverityEntry ::= SEQUENCE {
|
|
lcsTrapEventSeverityIndex Integer32,
|
|
lcsTrapEventSeverityGroupName DisplayString,
|
|
lcsTrapEventSeverityLevel Integer32,
|
|
lcsTrapEventSeveritySyslog Integer32,
|
|
lcsTrapEventSeverityTrap Integer32,
|
|
lcsTrapEventSeveritySMTP Integer32
|
|
}
|
|
|
|
lcsTrapEventSeverityIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsTrapEventSeverityEntry 1 }
|
|
|
|
lcsTrapEventSeverityGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group Name"
|
|
::= { lcsTrapEventSeverityEntry 2 }
|
|
|
|
lcsTrapEventSeverityLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Emergency
|
|
1:Alert
|
|
2:Critical
|
|
3:Error
|
|
4:Warning
|
|
5:Notice
|
|
6:Information
|
|
7:Debug"
|
|
::= { lcsTrapEventSeverityEntry 3 }
|
|
|
|
lcsTrapEventSeveritySyslog OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= { lcsTrapEventSeverityEntry 4 }
|
|
|
|
lcsTrapEventSeverityTrap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= { lcsTrapEventSeverityEntry 5 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsSMTP OBJECT IDENTIFIER ::= { lcsConfiguration 8 }
|
|
|
|
lcsSMTPMailServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing email server. "
|
|
::= { lcsSMTP 1 }
|
|
|
|
lcsSMTPUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing user name. "
|
|
::= { lcsSMTP 2 }
|
|
|
|
lcsSMTPPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing password. "
|
|
::= { lcsSMTP 3 }
|
|
|
|
lcsSMTPSender OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing sender. "
|
|
::= { lcsSMTP 5 }
|
|
|
|
lcsSMTPReturnPath OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing return path. "
|
|
::= { lcsSMTP 6 }
|
|
|
|
lcsSMTPEmailAddress1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing mail address. "
|
|
::= { lcsSMTP 7 }
|
|
|
|
lcsSMTPEmailAddress2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing mail address. "
|
|
::= { lcsSMTP 8 }
|
|
|
|
lcsSMTPEmailAddress3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing mail address. "
|
|
::= { lcsSMTP 9 }
|
|
|
|
lcsSMTPEmailAddress4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing mail address. "
|
|
::= { lcsSMTP 10 }
|
|
|
|
lcsSMTPEmailAddress5 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing mail address. "
|
|
::= { lcsSMTP 11 }
|
|
|
|
lcsSMTPEmailAddress6 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Up to 47 characters describing mail address. "
|
|
::= { lcsSMTP 12 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsACLConf OBJECT IDENTIFIER ::= { lcsConfiguration 9 }
|
|
|
|
-- RowStatus Info: createAndGo, notReady not supported.
|
|
-- =======================================================================================================================
|
|
-- Textual Conventions for the lcs Acl Mib
|
|
-- =======================================================================================================================
|
|
--
|
|
lcsACL OBJECT IDENTIFIER ::= { lcsACLConf 1 }
|
|
lcsACLACE OBJECT IDENTIFIER ::= { lcsACLConf 3 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsACLPortConf group
|
|
-- =======================================================================================================================
|
|
--lcsACLPortConfTable
|
|
|
|
lcsACLPortConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSACLPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL Port Conf Table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsACL 1 }
|
|
|
|
lcsACLPortConfEntry OBJECT-TYPE
|
|
SYNTAX LCSACLPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL Port Conf Entry. "
|
|
INDEX { ifIndex }
|
|
::= { lcsACLPortConfTable 1 }
|
|
|
|
LCSACLPortConfEntry ::=
|
|
SEQUENCE {
|
|
lcsACLPortConfPolicyID Integer32,
|
|
lcsACLPortConfAction INTEGER,
|
|
lcsACLPortConfRateLimiterID Integer32,
|
|
lcsACLPortConfPortRedirect Integer32,
|
|
lcsACLPortConfMirror AdminMode,
|
|
lcsACLPortConfLogging AdminMode,
|
|
lcsACLPortConfShutdown AdminMode,
|
|
lcsACLPortConfState AdminMode,
|
|
lcsACLPortConfCounter Counter32
|
|
}
|
|
|
|
lcsACLPortConfPolicyID OBJECT-TYPE
|
|
SYNTAX Integer32 (0..127)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The policy to apply to this port.
|
|
default: 0, range : 0 - 127. "
|
|
::= { lcsACLPortConfEntry 2 }
|
|
|
|
lcsACLPortConfAction OBJECT-TYPE
|
|
SYNTAX INTEGER { deny(0), permit(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether forwarding is permitted ('Permit') or denied ('Deny').
|
|
default: 1,
|
|
0: Deny,
|
|
1: Permit."
|
|
::= { lcsACLPortConfEntry 3 }
|
|
|
|
lcsACLPortConfRateLimiterID OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate limiter to apply on this port.
|
|
0: Disable,
|
|
range : 0 - 16. "
|
|
::= { lcsACLPortConfEntry 4 }
|
|
|
|
lcsACLPortConfPortRedirect OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port frames are redirected on.
|
|
0: Disable,
|
|
range : 0 - end port number. "
|
|
::= { lcsACLPortConfEntry 5 }
|
|
|
|
lcsACLPortConfMirror OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mirror operation of this port."
|
|
::= { lcsACLPortConfEntry 6 }
|
|
|
|
lcsACLPortConfLogging OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the logging operation of this port."
|
|
::= { lcsACLPortConfEntry 7 }
|
|
|
|
lcsACLPortConfShutdown OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the port shut down operation of this port."
|
|
DEFVAL { disable }
|
|
::= { lcsACLPortConfEntry 8 }
|
|
|
|
lcsACLPortConfState OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the port state of this port."
|
|
DEFVAL { enable }
|
|
::= { lcsACLPortConfEntry 9 }
|
|
|
|
lcsACLPortConfCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counts the number of frames that match this ACE. "
|
|
::= { lcsACLPortConfEntry 10 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsACLRateLimiter group
|
|
-- =======================================================================================================================
|
|
--lcsACLRateLimiterTable
|
|
|
|
lcsACLRateLimiterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSACLRateLimiterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL Rate Limiter Table."
|
|
::= { lcsACL 2 }
|
|
|
|
lcsACLRateLimiterEntry OBJECT-TYPE
|
|
SYNTAX LCSACLRateLimiterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL Rate Limiter Entry. "
|
|
INDEX { lcsACLRateLimiterID }
|
|
::= { lcsACLRateLimiterTable 1 }
|
|
|
|
LCSACLRateLimiterEntry ::= SEQUENCE {
|
|
lcsACLRateLimiterID Integer32,
|
|
lcsACLRateLimiterRate Integer32,
|
|
lcsACLRateLimiterUnit Integer32
|
|
}
|
|
|
|
lcsACLRateLimiterID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Limiter ID.
|
|
range : 1-16 "
|
|
::= { lcsACLRateLimiterEntry 1 }
|
|
|
|
lcsACLRateLimiterRate OBJECT-TYPE
|
|
SYNTAX Integer32(0..500000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 1,
|
|
range :
|
|
<0-500000> 10pps,The valid rate is 0, 10, 20, 30,
|
|
..., 5000000 in pps.
|
|
<0-400000> 25kbps,The valid rate is 0, 25, 50, 75,...,
|
|
10000000 in kbps."
|
|
::= { lcsACLRateLimiterEntry 2 }
|
|
|
|
lcsACLRateLimiterUnit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the rate unit.
|
|
0: 10pps, 1: 25kbps.
|
|
"
|
|
::= { lcsACLRateLimiterEntry 3 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsACLACE group
|
|
-- =======================================================================================================================
|
|
--lcsACLACEClear
|
|
|
|
lcsACLACEClear OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear all ACE counters."
|
|
::= { lcsACLACE 1 }
|
|
|
|
--lcsACLACETable
|
|
|
|
lcsACLACETable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSACLACEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Create ACL ACE entry. "
|
|
::= { lcsACLACE 2 }
|
|
|
|
lcsACLACEEntry OBJECT-TYPE
|
|
SYNTAX LCSACLACEEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACLACE Table."
|
|
INDEX { lcsACLACEIndex }
|
|
::= { lcsACLACETable 1 }
|
|
|
|
LCSACLACEEntry ::= SEQUENCE {
|
|
lcsACLACEIndex Integer32,
|
|
lcsACLACEID Integer32,
|
|
lcsACLACENextID Integer32,
|
|
-- lcsACLACELoopUp AdminMode,
|
|
lcsACLACEIngressPort DisplayString,
|
|
lcsACLACEPortPolicyNumber Integer32,
|
|
lcsACLACEPortPolicyBitmask Integer32,
|
|
lcsACLACEFrameType INTEGER,
|
|
lcsACLACEAction INTEGER,
|
|
lcsACLACEFilterPort DisplayString,
|
|
lcsACLACEDenyPortRedirect DisplayString,
|
|
lcsACLACERateLimiter Integer32,
|
|
lcsACLACEMirror AdminMode,
|
|
lcsACLACELogging AdminMode,
|
|
lcsACLACEShutdown AdminMode,
|
|
lcsACLACECounter Counter32,
|
|
lcsACLACEVLAN8021QTagged INTEGER,
|
|
lcsACLACEVLANVID Integer32,
|
|
lcsACLACEVLANTagPriority Integer32,
|
|
lcsACLACESMAC DisplayString,
|
|
lcsACLACEDMACType INTEGER,
|
|
lcsACLACEDMAC DisplayString,
|
|
lcsACLACEEtherType Integer32,
|
|
lcsACLACEArpOpCode INTEGER,
|
|
lcsACLACEArpFlagsRequestReply INTEGER,
|
|
lcsACLACEArpFlagsArpSMac INTEGER,
|
|
lcsACLACEArpFlagsRarpDmac INTEGER,
|
|
lcsACLACEArpFlagsLength INTEGER,
|
|
lcsACLACEArpFlagsIp INTEGER,
|
|
lcsACLACEArpFlagsEthernet INTEGER,
|
|
lcsACLACESIPType INTEGER,
|
|
lcsACLACESIPIPAddress IpAddress,
|
|
lcsACLACESIPIPMask IpAddress,
|
|
lcsACLACEDIPType INTEGER,
|
|
lcsACLACEDIPIPAddress IpAddress,
|
|
lcsACLACEDIPIPMask IpAddress,
|
|
lcsACLACEIPProtocol INTEGER,
|
|
lcsACLACEIPProtocolValue Integer32,
|
|
lcsACLACEIPFlagsTTL INTEGER,
|
|
lcsACLACEIPFlagsFragment INTEGER,
|
|
lcsACLACEIPFlagsOptions INTEGER,
|
|
lcsACLACEICMPType Integer32,
|
|
lcsACLACEICMPCode Integer32,
|
|
lcsACLACESourcePort DisplayString,
|
|
lcsACLACEDestPort DisplayString,
|
|
lcsACLACETCPFlagsFin INTEGER,
|
|
lcsACLACETCPFlagsSyn INTEGER,
|
|
lcsACLACETCPFlagsRst INTEGER,
|
|
lcsACLACETCPFlagsPsh INTEGER,
|
|
lcsACLACETCPFlagsAck INTEGER,
|
|
lcsACLACETCPFlagsUrg INTEGER,
|
|
lcsACLACEIPv6SIPAddress DisplayString,
|
|
lcsACLACEIPv6SIPBitmask DisplayString,
|
|
lcsACLACEIPv6HopLimit INTEGER,
|
|
lcsACLACESMACMask DisplayString,
|
|
lcsACLACEDMACMask DisplayString,
|
|
lcsACLACERowStatus RowStatus
|
|
}
|
|
|
|
lcsACLACEIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..256)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index. "
|
|
::= { lcsACLACEEntry 1 }
|
|
|
|
lcsACLACEID OBJECT-TYPE
|
|
SYNTAX Integer32(1..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the ACE ID is specified and an entry with this ACE ID
|
|
already exists, the ACE will be modified. Otherwise, a
|
|
new ACE will be added.
|
|
range : 1 - 256. "
|
|
::= { lcsACLACEEntry 2 }
|
|
|
|
lcsACLACENextID OBJECT-TYPE
|
|
SYNTAX Integer32 (0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the next ACE ID is non zero, the ACE will be placed
|
|
before this ACE in the list. If the next ACE ID is zero,
|
|
the ACE will be placed last in the list.
|
|
range : 0 - 256. "
|
|
::= { lcsACLACEEntry 3 }
|
|
|
|
-- lcsACLACELoopUp OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Specify the second lookup operation of the ACE."
|
|
-- ::= { lcsACLACEEntry 4 }
|
|
--
|
|
lcsACLACEIngressPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the ingress port of the ACE. Possible values are:
|
|
0: All,The ACE will match all ingress port.
|
|
Port n: The ACE will match a specific ingress port."
|
|
::= { lcsACLACEEntry 5 }
|
|
|
|
lcsACLACEPortPolicyNumber OBJECT-TYPE
|
|
SYNTAX Integer32(0..127)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"policy value.
|
|
range : 0 - 127.
|
|
0: Any."
|
|
::= { lcsACLACEEntry 6 }
|
|
|
|
lcsACLACEPortPolicyBitmask OBJECT-TYPE
|
|
SYNTAX Integer32(0..127)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the policy filter,
|
|
you can enter a specific policy bitmask.
|
|
range : 0 - 127, 0: no data."
|
|
::= { lcsACLACEEntry 7 }
|
|
|
|
lcsACLACEFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER { any(0), etype(1), arp(2),
|
|
ipv4(3), ipv6(4) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the frame type for this ACE.
|
|
When change the type Related oid will set default.
|
|
0: any,
|
|
1: etype,
|
|
2: arp,
|
|
3: ipv4,
|
|
4: ipv6."
|
|
::= { lcsACLACEEntry 8 }
|
|
|
|
lcsACLACEAction OBJECT-TYPE
|
|
SYNTAX INTEGER { deny(0), permit(1), filter(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: Deny
|
|
1: Permit
|
|
2: Filter"
|
|
::= { lcsACLACEEntry 9 }
|
|
|
|
lcsACLACEFilterPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Action' is 'Filter' can set.
|
|
0: Disable,
|
|
Port n: The ACE applies to this port number, where n is
|
|
the number of the switch port.
|
|
range: 0 - Port number.
|
|
"
|
|
::= { lcsACLACEEntry 10 }
|
|
|
|
lcsACLACEDenyPortRedirect OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frames that hit the ACE are redirected to the port
|
|
number specified here.Disabled,indicates that the port
|
|
redirect operation is disabled.
|
|
When 'Action' is 'Deny' can set.
|
|
0: disabled,
|
|
Port no: The ACE applies to this port number, where n is
|
|
the number of the switch port."
|
|
::= { lcsACLACEEntry 11 }
|
|
|
|
lcsACLACERateLimiter OBJECT-TYPE
|
|
SYNTAX Integer32(0..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0,
|
|
0: Disable
|
|
range : 0 - 16 "
|
|
::= { lcsACLACEEntry 12 }
|
|
|
|
lcsACLACEMirror OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0,
|
|
0: disable - Frames matching the ACE are not mirrored.
|
|
1: enable - Frames matching the ACE are mirrored.
|
|
"
|
|
::= { lcsACLACEEntry 13 }
|
|
|
|
lcsACLACELogging OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0,
|
|
0: disable - Frames matching the ACE are not logged.
|
|
1: enable - Frames matching the ACE are stored in the
|
|
system log."
|
|
::= { lcsACLACEEntry 14 }
|
|
|
|
lcsACLACEShutdown OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0,
|
|
0: disable - Port shut down is disabled for the AC.
|
|
1: enable - If a frame matches the ACE, the ingress port
|
|
will be disabled."
|
|
::= { lcsACLACEEntry 15 }
|
|
|
|
lcsACLACECounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter indicates the number of times the ACE was
|
|
hit by a frame. "
|
|
::= { lcsACLACEEntry 16 }
|
|
|
|
lcsACLACEVLAN8021QTagged OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1), any(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify whether frames can hit the action according to
|
|
the 802.1Q tagged.
|
|
default: 2,
|
|
0: disable - Untagged frame only.
|
|
1: enable - Tagged frame only.
|
|
2: Any - Any value is allowed.
|
|
"
|
|
::= { lcsACLACEEntry 17 }
|
|
|
|
lcsACLACEVLANVID OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the VLAN ID filter for this ACE.
|
|
The vid can't be set when 802.1Q Tagged is disabled.
|
|
default: 0,
|
|
0: Any - No VLAN ID filter is specified.
|
|
range : 0 - 4094 "
|
|
::= { lcsACLACEEntry 18 }
|
|
|
|
lcsACLACEVLANTagPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..14)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the tag priority for this ACE.
|
|
The tag priority can't be set when 802.1Q Tagged is disabled.
|
|
range: 0-14
|
|
0:0
|
|
1:1
|
|
2:2
|
|
3:3
|
|
4:4
|
|
5:5
|
|
6:6
|
|
7:7
|
|
8:0-1
|
|
9:2-3
|
|
10:4-5
|
|
11:6-7
|
|
12:0-3
|
|
13:4-7
|
|
14:Any
|
|
"
|
|
::= { lcsACLACEEntry 19 }
|
|
|
|
lcsACLACESMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure source MAC address for this ACE.
|
|
<mac-address>: A frame that hits this ACE matches this
|
|
source MAC address value. xx-xx-xx-xx-xx-xx.
|
|
Any: Don't care."
|
|
::= { lcsACLACEEntry 20 }
|
|
|
|
lcsACLACEDMACType OBJECT-TYPE
|
|
SYNTAX INTEGER { any(0), mc(1), bc(2), uc(3) ,
|
|
macAddress(4) , noData(5) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DMAC Type.
|
|
default: 0,
|
|
0: Any - Don't care.
|
|
1: Multicast - Frame must be multicast.
|
|
2: Broadcast - Frame must be broadcast.
|
|
3: Unicast - Frame must be unicast.
|
|
4: mac address.
|
|
5: no data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 21 }
|
|
|
|
lcsACLACEDMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure destination MAC address for this ACE.
|
|
<mac-address>: A frame that hits this ACE matches this
|
|
destination MAC address value. xx-xx-xx-xx-xx-xx."
|
|
::= { lcsACLACEEntry 22 }
|
|
|
|
lcsACLACEEtherType OBJECT-TYPE
|
|
SYNTAX Integer32(-1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: Any
|
|
range : 0, or 1536(0x0600) - 65535(0xffff) but excluding 0x0800(IPv4) 0x0806(ARP) and
|
|
0x86DD(IPv6).
|
|
-1: No data. "
|
|
::= { lcsACLACEEntry 23 }
|
|
|
|
lcsACLACEArpOpCode OBJECT-TYPE
|
|
SYNTAX INTEGER { any(0), arp(1), rarp(2),
|
|
other(3), noData(4) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure ARP opcode for this ACE.
|
|
default: 0,
|
|
0: Any - Don't care.
|
|
1: arp.
|
|
2: rarp.
|
|
3: other.
|
|
4: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 24 }
|
|
|
|
lcsACLACEArpFlagsRequestReply OBJECT-TYPE
|
|
SYNTAX INTEGER { reply(0), request(1), any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the available ARP/RARP opcode (OP) flag for this ACE.
|
|
default: 2,
|
|
0: Frame must have ARP Reply or RARP Reply OP flag.
|
|
1: Frame must have ARP Request or RARP Request OP flag set.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 25 }
|
|
|
|
lcsACLACEArpFlagsArpSMac OBJECT-TYPE
|
|
SYNTAX INTEGER { notEqualSMAC(0), equalSMAC(1),
|
|
any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify whether frames can hit the action according to their
|
|
sender hardware address field (SHA) settings.
|
|
default: 2,
|
|
0: ARP frames where SHA is not equal to the SMAC address.
|
|
1: ARP frames where SHA is equal to the SMAC address.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 26 }
|
|
|
|
lcsACLACEArpFlagsRarpDmac OBJECT-TYPE
|
|
SYNTAX INTEGER { notEqualDMAC(0), equalDMAC(1),
|
|
any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify whether frames can hit the action according to
|
|
their target hardware address field (THA) settings.
|
|
default: 2,
|
|
0: RARP frames where THA is not equal to the DMAC address.
|
|
1: RARP frames where THA is equal to the DMAC address.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 27 }
|
|
|
|
lcsACLACEArpFlagsLength OBJECT-TYPE
|
|
SYNTAX INTEGER { notEqualEthIpV4 (0), equalEthIpV4(1),
|
|
any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify whether frames can hit the action according to
|
|
their ARP/RARP hardware address length (HLN) and protocol
|
|
address length (PLN) settings.
|
|
default: 2,
|
|
0: ARP/RARP frames where the HLN is not equal to
|
|
Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04).
|
|
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06)
|
|
and the (PLN) is equal to IPv4(0x04).
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 28 }
|
|
|
|
lcsACLACEArpFlagsIp OBJECT-TYPE
|
|
SYNTAX INTEGER { notEqualEth(0), equalEth(1),
|
|
any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify whether frames can hit the action according to
|
|
their ARP/RARP hardware address space (HRD) settings.
|
|
default: 2,
|
|
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
|
|
1: ARP/RARP frames where the HLD is equal to Ethernet(1).
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 29 }
|
|
|
|
lcsACLACEArpFlagsEthernet OBJECT-TYPE
|
|
SYNTAX INTEGER { notEqualIp(0), equalIp(1),
|
|
any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify whether frames can hit the action
|
|
according to their ARP/RARP protocol address space (PRO) settings.
|
|
default: 2,
|
|
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
|
|
1: ARP/RARP frames where the PRO is equal to IP(0x800).
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 30 }
|
|
|
|
lcsACLACESIPType OBJECT-TYPE
|
|
SYNTAX INTEGER { any(0), ip(1), network(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure source IP address for this ACE.
|
|
default: 0,
|
|
0: Any - Don't care.
|
|
1: IP Address.
|
|
2: Network.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 31 }
|
|
|
|
lcsACLACESIPIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A frame that hits this ACE matches this source IP address
|
|
value."
|
|
::= { lcsACLACEEntry 32 }
|
|
|
|
lcsACLACESIPIPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specific sender IP mask in dotted decimal notation."
|
|
::= { lcsACLACEEntry 33 }
|
|
|
|
lcsACLACEDIPType OBJECT-TYPE
|
|
SYNTAX INTEGER { any(0), ip(1), network(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure destination IP address for this ACE.
|
|
default: 0,
|
|
0: Any - Don't care.
|
|
1: IP Address.
|
|
2: Network.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 34 }
|
|
|
|
lcsACLACEDIPIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A frame that hits this ACE matches this destination IP
|
|
address value."
|
|
::= { lcsACLACEEntry 35 }
|
|
|
|
lcsACLACEDIPIPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specific sender IP mask in dotted decimal notation."
|
|
::= { lcsACLACEEntry 36 }
|
|
|
|
lcsACLACEIPProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER{ any(0), icmp(1), udp(2), tcp(3),
|
|
other(4), noData(5)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the IP protocol filter for this ACE.
|
|
default: 0,
|
|
0: Any,
|
|
1: ICMP,
|
|
2: UDP,
|
|
3: TCP,
|
|
4: Other,
|
|
5: no data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 37 }
|
|
|
|
lcsACLACEIPProtocolValue OBJECT-TYPE
|
|
SYNTAX Integer32(0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure IP protocol value for this ACE when IP Protocol
|
|
is 'other'.
|
|
default: 256,
|
|
256: No data.
|
|
range : 0 - 256"
|
|
::= { lcsACLACEEntry 38 }
|
|
|
|
lcsACLACEIPFlagsTTL OBJECT-TYPE
|
|
SYNTAX INTEGER { nonZero(0), zero(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the Time-to-Live settings for this ACE.
|
|
default: 0,
|
|
0: zero,
|
|
1: Non-Zero
|
|
2: Any,,
|
|
3: No data."
|
|
DEFVAL { nonZero }
|
|
::= { lcsACLACEEntry 39 }
|
|
|
|
lcsACLACEIPFlagsFragment OBJECT-TYPE
|
|
SYNTAX INTEGER{yes(0), no(1), any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the fragment offset settings for this ACE.
|
|
default: 2,
|
|
0: No,
|
|
1: Yes,
|
|
2: Any,
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 40 }
|
|
|
|
lcsACLACEIPFlagsOptions OBJECT-TYPE
|
|
SYNTAX INTEGER{yes(0), no(1), any(2), noData(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the options flag setting for this ACE.
|
|
default: 2,
|
|
0: No,
|
|
1: Yes,
|
|
2: Any,
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 41 }
|
|
|
|
lcsACLACEICMPType OBJECT-TYPE
|
|
SYNTAX Integer32(0..257)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure ICMP type for this ACE.
|
|
default: 256,
|
|
256: Any - Don't care.
|
|
257: No data.
|
|
range : 0 - 257."
|
|
::= { lcsACLACEEntry 42 }
|
|
|
|
lcsACLACEICMPCode OBJECT-TYPE
|
|
SYNTAX Integer32(0..257)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure ICMP code for this ACE.
|
|
default: 256,
|
|
256: Any - Don't care.
|
|
257: No data.
|
|
range : 0 - 257."
|
|
::= { lcsACLACEEntry 43 }
|
|
|
|
lcsACLACESourcePort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure Source UDP/TCP port range for this ACE.
|
|
default: any,
|
|
specific: 0~65535,
|
|
range : 0 - 65535."
|
|
::= { lcsACLACEEntry 44 }
|
|
|
|
lcsACLACEDestPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure Destination UDP/TCP port range for this ACE.
|
|
default: any,
|
|
specific: 0~65535,
|
|
range : 0 - 65535."
|
|
::= { lcsACLACEEntry 45 }
|
|
|
|
lcsACLACETCPFlagsFin OBJECT-TYPE
|
|
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure TCP (FIN) flags for this ACE.
|
|
default: 2,
|
|
0: TCP frames where the FIN field is unset.
|
|
1: TCP frames where the FIN field is set.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 46 }
|
|
|
|
lcsACLACETCPFlagsSyn OBJECT-TYPE
|
|
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure TCP (SYN) flags for this ACE.
|
|
default: 2,
|
|
0: TCP frames where the SYN field is unset.
|
|
1: TCP frames where the SYN field is set.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 47 }
|
|
|
|
lcsACLACETCPFlagsRst OBJECT-TYPE
|
|
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure TCP (RST) flags for this ACE.
|
|
default: 2,
|
|
0: TCP frames where the RST field is unset.
|
|
1: TCP frames where the RST field is set.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 48 }
|
|
|
|
lcsACLACETCPFlagsPsh OBJECT-TYPE
|
|
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure TCP (PSH) flags for this ACE.
|
|
default: 2,
|
|
0: TCP frames where the PSH field is unset.
|
|
1: TCP frames where the PSH field is set.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 49 }
|
|
|
|
lcsACLACETCPFlagsAck OBJECT-TYPE
|
|
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure TCP (ACK) flags for this ACE.
|
|
default: 2,
|
|
0: TCP frames where the ACK field is unset.
|
|
1: TCP frames where the ACK field is set.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 50 }
|
|
|
|
lcsACLACETCPFlagsUrg OBJECT-TYPE
|
|
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure TCP (URG) flags for this ACE.
|
|
default: 2,
|
|
0: TCP frames where the URG field is unset.
|
|
1: TCP frames where the URG field is set.
|
|
2: Any - Don't care.
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 51 }
|
|
|
|
lcsACLACEIPv6SIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the source IPv6 filter,
|
|
you can enter a specific SIPv6 address.
|
|
The field only supported last 32 bits for IPv6 address. "
|
|
::= { lcsACLACEEntry 52 }
|
|
|
|
lcsACLACEIPv6SIPBitmask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'Specific' is selected for the source IPv6 filter,
|
|
you can enter a specific SIPv6 mask.
|
|
The field only supported last 32 bits for IPv6 address. "
|
|
::= { lcsACLACEEntry 53 }
|
|
|
|
lcsACLACEIPv6HopLimit OBJECT-TYPE
|
|
SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the hop limit settings for this ACE.
|
|
default: 2,
|
|
0: Where the Hop Limit field is unset.
|
|
1: Where the Hop Limit field is set.
|
|
2: Any - Don't care,
|
|
3: No data."
|
|
DEFVAL { any }
|
|
::= { lcsACLACEEntry 54 }
|
|
|
|
lcsACLACESMACMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure source MAC address mask for this ACE.
|
|
<mac-address>: A frame that hits this ACE matches this
|
|
source MAC address value. xx-xx-xx-xx-xx-xx."
|
|
::= { lcsACLACEEntry 56 }
|
|
|
|
lcsACLACEDMACMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure destination MAC address mask for this ACE.
|
|
<mac-address>: A frame that hits this ACE matches this
|
|
destination MAC address value. xx-xx-xx-xx-xx-xx."
|
|
::= { lcsACLACEEntry 57 }
|
|
|
|
lcsACLACERowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create/delete entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsACLACEEntry 58 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsACLStatus group
|
|
-- =======================================================================================================================
|
|
--lcsACLStatusTable
|
|
|
|
lcsACLStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSACLStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" ACL ACE Status entry. "
|
|
::= { lcsACL 4 }
|
|
|
|
lcsACLStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSACLStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL Status Entry."
|
|
INDEX { lcsACLStatusIndex }
|
|
::= { lcsACLStatusTable 1 }
|
|
|
|
LCSACLStatusEntry ::= SEQUENCE {
|
|
lcsACLStatusIndex Integer32,
|
|
lcsACLStatusUser DisplayString,
|
|
lcsACLStatusID Integer32,
|
|
lcsACLStatusIngressPort DisplayString,
|
|
lcsACLStatusFrameType DisplayString,
|
|
lcsACLStatusAction DisplayString,
|
|
lcsACLStatusRateLimiter DisplayString,
|
|
lcsACLStatusPortRedirect DisplayString,
|
|
lcsACLStatusMirror DisplayString,
|
|
lcsACLStatusCPU DisplayString,
|
|
lcsACLStatusCPUOnce DisplayString,
|
|
lcsACLStatusCounter Counter32,
|
|
lcsACLStatusConflict DisplayString
|
|
}
|
|
|
|
lcsACLStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..256)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL status index. "
|
|
::= { lcsACLStatusEntry 1 }
|
|
|
|
lcsACLStatusUser OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the ACL user.
|
|
S : Static,
|
|
IPMG : IP Management,
|
|
IPSG : IP Source Guard,
|
|
IPMC : IPMC,
|
|
ARPI : Arp Inspection,
|
|
UPnP : UPnP,
|
|
DHCP : DHCP. "
|
|
::= { lcsACLStatusEntry 2 }
|
|
|
|
lcsACLStatusID OBJECT-TYPE
|
|
SYNTAX Integer32(1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACE ID.
|
|
range : 1 - 256. "
|
|
::= { lcsACLStatusEntry 3 }
|
|
|
|
lcsACLStatusIngressPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the ingress port of the ACE. Possible values are:
|
|
All: The ACE will match all ingress port.
|
|
Port: The ACE will match a specific ingress port. "
|
|
::= { lcsACLStatusEntry 4 }
|
|
|
|
lcsACLStatusFrameType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the frame type of the ACE.
|
|
Any: The ACE will match any frame type.
|
|
EType: The ACE will match Ethernet Type frames.
|
|
Note that an Ethernet Type based ACE will not get matched
|
|
by IP and ARP frames.
|
|
ARP: The ACE will match ARP/RARP frames.
|
|
IPv4: The ACE will match all IPv4 frames.
|
|
IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol.
|
|
IPv4/UDP: The ACE will match IPv4 frames with UDP protocol.
|
|
IPv4/TCP: The ACE will match IPv4 frames with TCP protocol.
|
|
IPv4/Other: The ACE will match IPv4 frames, which are not
|
|
ICMP/UDP/TCP.
|
|
IPv6: The ACE will match all IPv6 standard frames. "
|
|
::= { lcsACLStatusEntry 5 }
|
|
|
|
lcsACLStatusAction OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the forwarding action of the ACE. "
|
|
::= { lcsACLStatusEntry 6 }
|
|
|
|
lcsACLStatusRateLimiter OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the rate limiter number of the ACE. "
|
|
::= { lcsACLStatusEntry 7 }
|
|
|
|
lcsACLStatusPortRedirect OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port redirect operation of the ACE.
|
|
Frames matching the ACE are redirected to the port number. "
|
|
::= { lcsACLStatusEntry 8 }
|
|
|
|
lcsACLStatusMirror OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the mirror operation of this port."
|
|
::= { lcsACLStatusEntry 9 }
|
|
|
|
lcsACLStatusCPU OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forward packet that matched the specific ACE to CPU. "
|
|
::= { lcsACLStatusEntry 10 }
|
|
|
|
lcsACLStatusCPUOnce OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forward first packet that matched the specific ACE to CPU. "
|
|
::= { lcsACLStatusEntry 11 }
|
|
|
|
lcsACLStatusCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter indicates the number of times the ACE was hit
|
|
by a frame. "
|
|
::= { lcsACLStatusEntry 12 }
|
|
|
|
lcsACLStatusConflict OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the hardware status of the specific ACE.
|
|
The specific ACE is not applied to the hardware due to
|
|
hardware limitations. "
|
|
::= { lcsACLStatusEntry 13 }
|
|
|
|
|
|
-- =======================================================================================================================
|
|
-- lcsAclConformance
|
|
-- =======================================================================================================================
|
|
lcsAclConformance OBJECT IDENTIFIER ::= { lcsACL 200 }
|
|
|
|
lcsAclCompliances OBJECT IDENTIFIER ::= { lcsAclConformance 1 }
|
|
|
|
lcsAclGroups OBJECT IDENTIFIER ::= { lcsAclConformance 2 }
|
|
|
|
lcsACLPortConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- lcsACLPortConfTable
|
|
lcsACLPortConfPolicyID,
|
|
lcsACLPortConfAction,
|
|
lcsACLPortConfRateLimiterID,
|
|
lcsACLPortConfPortRedirect,
|
|
lcsACLPortConfMirror,
|
|
lcsACLPortConfLogging,
|
|
lcsACLPortConfShutdown,
|
|
lcsACLPortConfState,
|
|
lcsACLPortConfCounter
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to indicate
|
|
lcs ACL information."
|
|
::= { lcsAclGroups 1 }
|
|
|
|
lcsACLRateLimiterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- lcsACLRateLimiterTable
|
|
lcsACLRateLimiterRate,
|
|
lcsACLRateLimiterUnit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to indicate
|
|
lcs ACL information."
|
|
::= { lcsAclGroups 2 }
|
|
|
|
lcsACLACEGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- lcsACLACEClear
|
|
lcsACLACEClear,
|
|
|
|
-- lcsACLACETable
|
|
lcsACLACEID,
|
|
lcsACLACENextID,
|
|
-- lcsACLACELoopUp,
|
|
lcsACLACEIngressPort,
|
|
lcsACLACEPortPolicyNumber,
|
|
lcsACLACEPortPolicyBitmask,
|
|
lcsACLACEFrameType,
|
|
lcsACLACEAction,
|
|
lcsACLACEFilterPort,
|
|
lcsACLACEDenyPortRedirect,
|
|
lcsACLACERateLimiter,
|
|
lcsACLACEMirror,
|
|
lcsACLACELogging,
|
|
lcsACLACEShutdown,
|
|
lcsACLACECounter,
|
|
lcsACLACEVLAN8021QTagged,
|
|
lcsACLACEVLANVID,
|
|
lcsACLACEVLANTagPriority,
|
|
lcsACLACESMAC,
|
|
lcsACLACEDMACType,
|
|
lcsACLACEDMAC,
|
|
lcsACLACEEtherType,
|
|
lcsACLACEArpOpCode,
|
|
lcsACLACEArpFlagsRequestReply,
|
|
lcsACLACEArpFlagsArpSMac,
|
|
lcsACLACEArpFlagsRarpDmac,
|
|
lcsACLACEArpFlagsLength,
|
|
lcsACLACEArpFlagsIp,
|
|
lcsACLACEArpFlagsEthernet,
|
|
lcsACLACESIPType,
|
|
lcsACLACESIPIPAddress,
|
|
lcsACLACESIPIPMask,
|
|
lcsACLACEDIPType,
|
|
lcsACLACEDIPIPAddress,
|
|
lcsACLACEDIPIPMask,
|
|
lcsACLACEIPProtocol,
|
|
lcsACLACEIPProtocolValue,
|
|
lcsACLACEIPFlagsTTL,
|
|
lcsACLACEIPFlagsFragment,
|
|
lcsACLACEIPFlagsOptions,
|
|
lcsACLACEICMPType,
|
|
lcsACLACEICMPCode,
|
|
lcsACLACESourcePort,
|
|
lcsACLACEDestPort,
|
|
lcsACLACETCPFlagsFin,
|
|
lcsACLACETCPFlagsSyn,
|
|
lcsACLACETCPFlagsRst,
|
|
lcsACLACETCPFlagsPsh,
|
|
lcsACLACETCPFlagsAck,
|
|
lcsACLACETCPFlagsUrg,
|
|
lcsACLACEIPv6SIPAddress,
|
|
lcsACLACEIPv6SIPBitmask,
|
|
lcsACLACEIPv6HopLimit,
|
|
lcsACLACERowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to indicate
|
|
lcs ACL information."
|
|
::= { lcsAclGroups 3 }
|
|
|
|
lcsACLStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- lcsACLStatusTable
|
|
lcsACLStatusUser,
|
|
lcsACLStatusID,
|
|
lcsACLStatusIngressPort,
|
|
lcsACLStatusFrameType,
|
|
lcsACLStatusAction,
|
|
lcsACLStatusRateLimiter,
|
|
lcsACLStatusPortRedirect,
|
|
lcsACLStatusMirror,
|
|
lcsACLStatusCPU,
|
|
lcsACLStatusCPUOnce,
|
|
lcsACLStatusCounter,
|
|
lcsACLStatusConflict
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to indicate
|
|
lcs ACL information."
|
|
::= { lcsAclGroups 4 }
|
|
|
|
|
|
-- =======================================================================================================================
|
|
-- =======================================================================================================================
|
|
-- RowStatus Info: createAndGo, notReady not supported.
|
|
-- =======================================================================================================================
|
|
-- Textual Conventions for the lcs Qos Mib
|
|
-- =======================================================================================================================
|
|
--
|
|
lcsQosConf OBJECT IDENTIFIER ::= { lcsConfiguration 10 }
|
|
lcsQos OBJECT IDENTIFIER ::= { lcsQosConf 1 }
|
|
lcsQosPortClassification OBJECT IDENTIFIER ::= { lcsQos 1 }
|
|
lcsQosPortPolicing OBJECT IDENTIFIER ::= { lcsQos 2 }
|
|
-- lcsQosQueuePolicing OBJECT IDENTIFIER ::= { lcsQos 3 }
|
|
-- lcsQosPortScheduler OBJECT IDENTIFIER ::= { lcsQos 4 }
|
|
lcsQosEgressPortPCPRemarking OBJECT IDENTIFIER ::= { lcsQos 6 }
|
|
lcsQosPortDSCP OBJECT IDENTIFIER ::= { lcsQos 7 }
|
|
lcsQosDSCPBasedQoS OBJECT IDENTIFIER ::= { lcsQos 8 }
|
|
lcsQosDSCPTranslation OBJECT IDENTIFIER ::= { lcsQos 9 }
|
|
lcsQosDSCPClassification OBJECT IDENTIFIER ::= { lcsQos 10 }
|
|
lcsQosControlList OBJECT IDENTIFIER ::= { lcsQos 11 }
|
|
lcsQosStormControl OBJECT IDENTIFIER ::= { lcsQos 12 }
|
|
lcsQosPortStormControl OBJECT IDENTIFIER ::= { lcsQos 13 }
|
|
lcsQosWRED OBJECT IDENTIFIER ::= { lcsQos 14 }
|
|
lcsQosQCLStatus OBJECT IDENTIFIER ::= { lcsQos 15 }
|
|
lcsQosPortShapers OBJECT IDENTIFIER ::= { lcsQos 16 }
|
|
lcsQosPortSchedulers OBJECT IDENTIFIER ::= { lcsQos 17 }
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosPortClassification group
|
|
-- =======================================================================================================================
|
|
--lcsQosPortClassificationTable
|
|
|
|
lcsQosPortClassificationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosPortClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Ingress Port Classification.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosPortClassification 1 }
|
|
|
|
lcsQosPortClassificationEntry OBJECT-TYPE
|
|
SYNTAX LCSQosPortClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Port Classification Table."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosPortClassificationTable 1 }
|
|
|
|
LCSQosPortClassificationEntry ::= SEQUENCE {
|
|
lcsQosPortClassificationQoSClass Integer32,
|
|
lcsQosPortClassificationDPlevel Integer32,
|
|
lcsQosPortClassificationPCP Integer32,
|
|
lcsQosPortClassificationDEI Integer32,
|
|
lcsQosPortClassificationPCPClassification AdminMode,
|
|
lcsQosPortClassificationDSCPBased AdminMode,
|
|
-- lcsQosPortClassificationQCLAddr INTEGER,
|
|
-- lcsQosPortClassificationKeyType KeyType,
|
|
lcsQosPortClassificationWredGroup Integer32
|
|
}
|
|
|
|
lcsQosPortClassificationQoSClass OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the default QoS class, i.e., the QoS class for
|
|
frames not classified
|
|
in any way. There is a one to one mapping between
|
|
QoS class, queue and
|
|
priority. A QoS class of 0 (zero) has the lowest priority.
|
|
NOTe: If the QoS class has been dynamically changed, then
|
|
the actual QoS class
|
|
is shown in parentheses after the configured QoS class.
|
|
range: 0~7,
|
|
default: 0."
|
|
::= { lcsQosPortClassificationEntry 2 }
|
|
|
|
lcsQosPortClassificationDPlevel OBJECT-TYPE
|
|
SYNTAX Integer32(0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DP level for frames not classified in any way.
|
|
range: 0~3,
|
|
default: 0."
|
|
::= { lcsQosPortClassificationEntry 3 }
|
|
|
|
lcsQosPortClassificationPCP OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority Code Point. It is a 3-bit field storing
|
|
the priority level for the 802.1Q frame.
|
|
range: 0~7,
|
|
default: 0.
|
|
"
|
|
::= { lcsQosPortClassificationEntry 4 }
|
|
|
|
lcsQosPortClassificationDEI OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Eligible Indicator. It is a 1-bit field in the VLAN.
|
|
range 0~1,
|
|
default: 0.
|
|
"
|
|
::= { lcsQosPortClassificationEntry 5 }
|
|
|
|
lcsQosPortClassificationPCPClassification OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the classification mode for tagged frames.
|
|
"
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortClassificationEntry 6 }
|
|
|
|
lcsQosPortClassificationDSCPBased OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Click to Enable DSCP Based QoS Ingress Port Classification."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortClassificationEntry 7 }
|
|
|
|
-- lcsQosPortClassificationQCLAddr OBJECT-TYPE
|
|
-- SYNTAX INTEGER { sMacSip(0), dMacDip (1) }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the QCL address matching mode.
|
|
-- 0: SMAC/SIP,
|
|
-- 1: DMAC/DIP,
|
|
-- default: SMAC/SIP.
|
|
-- Only support SPARX_III."
|
|
-- DEFVAL { sMacSip }
|
|
-- ::= { lcsQosPortClassificationEntry 8 }
|
|
|
|
-- lcsQosPortClassificationKeyType OBJECT-TYPE
|
|
-- SYNTAX KeyType
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The key type specifying the key generated for frames received
|
|
-- on the port.
|
|
-- 0: Normal, Half key, match outer tag, SIP/DIP and SMAC/DMAC.
|
|
-- 1: Double Tag: Quarter key, match inner and outer tag.
|
|
-- 2: IP Address: Half key, match inner and outer tag, SIP and
|
|
-- DIP. For non-IP frames, match outer tag only.
|
|
-- 3: MAC and IP Address: Full key, match inner and outer tag,
|
|
-- SMAC, DMAC, SIP and DIP.
|
|
-- Only support on SERVAL version."
|
|
-- DEFVAL { normal }
|
|
-- ::= { lcsQosPortClassificationEntry 9 }
|
|
|
|
lcsQosPortClassificationWredGroup OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the WRED group membership. Range:1-3."
|
|
::= { lcsQosPortClassificationEntry 10 }
|
|
|
|
--lcsQoSIngressPortTagClassificationTable
|
|
lcsQoSIngressPortTagClassificationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQoSIngressPortTagClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show QoS Ingress Port Tag Classification.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosPortClassification 2 }
|
|
|
|
lcsQoSIngressPortTagClassificationEntry OBJECT-TYPE
|
|
SYNTAX LCSQoSIngressPortTagClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Ingress Port Tag Classification entry."
|
|
INDEX { ifIndex,
|
|
lcsQoSIngressPortTagPCP,
|
|
lcsQoSIngressPortTagDEI }
|
|
::= { lcsQoSIngressPortTagClassificationTable 1 }
|
|
|
|
LCSQoSIngressPortTagClassificationEntry ::= SEQUENCE {
|
|
lcsQoSIngressPortTagPCP INTEGER,
|
|
lcsQoSIngressPortTagDEI INTEGER,
|
|
lcsQoSIngressPortTagQosClass Integer32,
|
|
lcsQoSIngressPortTagDPLevel Integer32
|
|
}
|
|
|
|
lcsQoSIngressPortTagPCP OBJECT-TYPE
|
|
SYNTAX INTEGER { pcp0(1),
|
|
pcp1(2),
|
|
pcp2(3),
|
|
pcp3(4),
|
|
pcp4(5),
|
|
pcp5(6),
|
|
pcp6(7),
|
|
pcp7(8) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 1-8,
|
|
PCP0:1, PCP1:2..."
|
|
::= { lcsQoSIngressPortTagClassificationEntry 2 }
|
|
|
|
lcsQoSIngressPortTagDEI OBJECT-TYPE
|
|
SYNTAX INTEGER { dei0(1), dei1(2) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ingress Port Tag dei,
|
|
DEI0:1, DEI1:2."
|
|
::= { lcsQoSIngressPortTagClassificationEntry 3 }
|
|
|
|
lcsQoSIngressPortTagQosClass OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 0-7."
|
|
::= { lcsQoSIngressPortTagClassificationEntry 4 }
|
|
|
|
lcsQoSIngressPortTagDPLevel OBJECT-TYPE
|
|
SYNTAX Integer32(0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 0-3."
|
|
::= { lcsQoSIngressPortTagClassificationEntry 5 }
|
|
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosPortPolicing group
|
|
-- =======================================================================================================================
|
|
--lcsQosPortPolicingTable
|
|
lcsQosPortPolicingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosPortPolicingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Policer settings.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosPortPolicing 1 }
|
|
|
|
lcsQosPortPolicingEntry OBJECT-TYPE
|
|
SYNTAX LCSQosPortPolicingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Policer setting entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosPortPolicingTable 1 }
|
|
|
|
LCSQosPortPolicingEntry ::= SEQUENCE {
|
|
lcsQosPortPolicingEnabled AdminMode,
|
|
lcsQosPortPolicingRate Integer32,
|
|
lcsQosPortPolicingUnit Integer32,
|
|
lcsQosPortPolicingFlowControl AdminMode
|
|
}
|
|
|
|
lcsQosPortPolicingEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the policer is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortPolicingEntry 2 }
|
|
|
|
lcsQosPortPolicingRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the rate for the policer.
|
|
default: 500(kbps)."
|
|
::= { lcsQosPortPolicingEntry 3 }
|
|
|
|
lcsQosPortPolicingUnit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the policer rate.
|
|
0: kbps
|
|
1: Mbps
|
|
2: fps
|
|
3: kfps
|
|
"
|
|
::= { lcsQosPortPolicingEntry 4 }
|
|
|
|
lcsQosPortPolicingFlowControl OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If flow control is enabled and the port is in flow control mode,
|
|
then pause frames are sent instead of discarding frames."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortPolicingEntry 5 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosQueuePolicing group
|
|
-- =======================================================================================================================
|
|
--lcsQosQueuePolicingTable
|
|
-- lcsQosQueuePolicingTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSQosQueuePolicingEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Queue Policer settings.
|
|
-- INDEX for this table is ifIndex which is
|
|
-- equivalent to the panel port number."
|
|
-- ::= { lcsQosQueuePolicing 1 }
|
|
--
|
|
-- lcsQosQueuePolicingEntry OBJECT-TYPE
|
|
-- SYNTAX LCSQosQueuePolicingEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Qos Queue Policing Entry."
|
|
-- INDEX { ifIndex }
|
|
-- ::= { lcsQosQueuePolicingTable 1 }
|
|
--
|
|
-- LCSQosQueuePolicingEntry ::= SEQUENCE {
|
|
-- lcsQosQueuePolicingQueue0Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue0Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue0Unit Integer32,
|
|
-- lcsQosQueuePolicingQueue1Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue1Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue1Unit Integer32,
|
|
-- lcsQosQueuePolicingQueue2Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue2Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue2Unit Integer32,
|
|
-- lcsQosQueuePolicingQueue3Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue3Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue3Unit Integer32,
|
|
-- lcsQosQueuePolicingQueue4Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue4Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue4Unit Integer32,
|
|
-- lcsQosQueuePolicingQueue5Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue5Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue5Unit Integer32,
|
|
-- lcsQosQueuePolicingQueue6Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue6Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue6Unit Integer32,
|
|
-- lcsQosQueuePolicingQueue7Enable AdminMode,
|
|
-- lcsQosQueuePolicingQueue7Rate Integer32,
|
|
-- lcsQosQueuePolicingQueue7Unit Integer32
|
|
-- }
|
|
--
|
|
-- lcsQosQueuePolicingQueue0Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 0 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 3 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue0Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 0 policer is enabled on this switch port.
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 4 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue0Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 5 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue1Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 1 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 6 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue1Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 1 policer is enabled on this switch port.,
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 7 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue1Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 8 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue2Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 2 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 9 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue2Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 2 policer is enabled on this switch port.
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 10 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue2Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 11 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue3Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 3 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 12 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue3Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 3 policer is enabled on this switch port.
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 13 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue3Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 14 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue4Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 4 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 15 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue4Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 4 policer is enabled on this switch port.
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 16 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue4Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 17 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue5Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 5 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 18 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue5Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 5 policer is enabled on this switch port.
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 19 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue5Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 20 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue6Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 6 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 21 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue6Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 6 policer is enabled on this switch port.
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 22 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue6Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 23 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue7Enable OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 7 policer is enabled on this switch port."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosQueuePolicingEntry 24 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue7Rate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the queue 7 policer is enabled on this switch port.
|
|
-- default: 500(Kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 25 }
|
|
--
|
|
-- lcsQosQueuePolicingQueue7Unit OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the unit of measure for the queue policer rate as kbps or Mbps.
|
|
-- range:
|
|
-- 0:kbs
|
|
-- 1:Mbps
|
|
-- default: 0(kbps)"
|
|
-- ::= { lcsQosQueuePolicingEntry 26 }
|
|
--
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosPortScheduler group
|
|
-- =======================================================================================================================
|
|
--lcsQosPortSchedulerModeTable
|
|
|
|
-- lcsQosPortSchedulerModeTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSQosPortSchedulerModeEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The basic QoS Port Scheduler Mode settings.
|
|
-- INDEX for this table is ifIndex which is
|
|
-- equivalent to the panel port number."
|
|
-- ::= { lcsQosPortScheduler 1 }
|
|
--
|
|
-- lcsQosPortSchedulerModeEntry OBJECT-TYPE
|
|
-- SYNTAX LCSQosPortSchedulerModeEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Qos Port Scheduler Mode entry."
|
|
-- INDEX { ifIndex }
|
|
-- ::= { lcsQosPortSchedulerModeTable 1 }
|
|
--
|
|
-- LCSQosPortSchedulerModeEntry ::= SEQUENCE {
|
|
-- lcsQosSchedulerMode Integer32,
|
|
-- lcsQosSchedulerShaper AdminMode,
|
|
-- lcsQosSchedulerShaperRate Integer32
|
|
-- }
|
|
--
|
|
-- lcsQosSchedulerMode OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the scheduler mode is Strict Priority or Weighted
|
|
-- on this switch port.
|
|
-- 0:Strict Priority,
|
|
-- 2: 2 Queues Weighted
|
|
-- 3: 3 Queues Weighted: only Jaguar2 support
|
|
-- 4: 4 Queues Weighted: only Jaguar2 support
|
|
-- 5: 5 Queues Weighted: only Jaguar2 support
|
|
-- 6: 6 Queues Weighted
|
|
-- 7: 7 Queues Weighted: only Jaguar2 support
|
|
-- 8: 8 Queues Weighted: only Jaguar2 support"
|
|
-- ::= { lcsQosPortSchedulerModeEntry 2 }
|
|
--
|
|
-- lcsQosSchedulerShaper OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls whether the port shaper is enabled."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosPortSchedulerModeEntry 3 }
|
|
--
|
|
-- lcsQosSchedulerShaperRate OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Controls the rate for the port shaper.
|
|
-- default: 500 kbps."
|
|
-- ::= { lcsQosPortSchedulerModeEntry 4 }
|
|
--
|
|
--lcsQosPortSchedulerTable
|
|
-- lcsQosPortSchedulerTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSQosPortSchedulerEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Show Qos Port Scheduler.
|
|
-- INDEX for this table is ifIndex which is
|
|
-- equivalent to the panel port number."
|
|
-- ::= { lcsQosPortScheduler 2 }
|
|
--
|
|
-- lcsQosPortSchedulerEntry OBJECT-TYPE
|
|
-- SYNTAX LCSQosPortSchedulerEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Qos Port Scheduler Entry."
|
|
-- INDEX { ifIndex,
|
|
-- lcsQosSchedulerPortQueue}
|
|
-- ::= { lcsQosPortSchedulerTable 1 }
|
|
--
|
|
-- LCSQosPortSchedulerEntry ::= SEQUENCE {
|
|
-- lcsQosSchedulerPortQueue INTEGER,
|
|
-- lcsQosSchedulerPortQueueShaper AdminMode,
|
|
-- lcsQosSchedulerPortQueueShaperRate Integer32,
|
|
-- lcsQosSchedulerPortQueueShaperExcess AdminMode,
|
|
-- lcsQosSchedulerPortQueueSchedulerWeight Integer32,
|
|
-- lcsQosSchedulerPortQueueSchedulerPercent DisplayString
|
|
-- }
|
|
--
|
|
-- lcsQosSchedulerPortQueue OBJECT-TYPE
|
|
-- SYNTAX INTEGER { q0(1),
|
|
-- q1(2),
|
|
-- q2(3),
|
|
-- q3(4),
|
|
-- q4(5),
|
|
-- q5(6),
|
|
-- q6(7),
|
|
-- q7(8) }
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "range: 1-8.
|
|
-- Q0: 1, Q1: 2, ..."
|
|
-- ::= { lcsQosPortSchedulerEntry 2 }
|
|
--
|
|
-- lcsQosSchedulerPortQueueShaper OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Qos scheduler admin state."
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosPortSchedulerEntry 3 }
|
|
--
|
|
-- lcsQosSchedulerPortQueueShaperRate OBJECT-TYPE
|
|
-- SYNTAX Integer32(100..1000000)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "range: 100..1000000 kbps. "
|
|
-- ::= { lcsQosPortSchedulerEntry 4 }
|
|
--
|
|
-- lcsQosSchedulerPortQueueShaperExcess OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "admin state lcsQosSchedulerPortQueueShaperExcess"
|
|
-- DEFVAL { disable }
|
|
-- ::= { lcsQosPortSchedulerEntry 5 }
|
|
--
|
|
-- lcsQosSchedulerPortQueueSchedulerWeight OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..100)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "range: 1-100,
|
|
-- default: 17.
|
|
-- Only use in Q0 - Q5. Q6 & Q7 show 0"
|
|
-- ::= { lcsQosPortSchedulerEntry 6 }
|
|
--
|
|
-- lcsQosSchedulerPortQueueSchedulerPercent OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Only use in Q0 - Q5. Q6 & Q7 show empty"
|
|
-- ::= { lcsQosPortSchedulerEntry 7 }
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosEgressPortPCPRemarking group
|
|
-- =======================================================================================================================
|
|
--lcsQosEgressPortPCPRemarkingTable
|
|
lcsQosEgressPortPCPRemarkingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosEgressPortPCPRemarkingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic Qos Egress Port PCP Remarking
|
|
Configuration settings.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosEgressPortPCPRemarking 1 }
|
|
|
|
lcsQosEgressPortPCPRemarkingEntry OBJECT-TYPE
|
|
SYNTAX LCSQosEgressPortPCPRemarkingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Egress Port PCP Remarking Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosEgressPortPCPRemarkingTable 1 }
|
|
|
|
LCSQosEgressPortPCPRemarkingEntry ::= SEQUENCE {
|
|
lcsQosEgressPortPCPRemarkingMode INTEGER
|
|
}
|
|
|
|
lcsQosEgressPortPCPRemarkingMode OBJECT-TYPE
|
|
SYNTAX INTEGER { keep(0), specific(1), mapped(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the tag remarking mode for this port.
|
|
0:Keep, Use classified PCP/DEI values.
|
|
1:Specific, Use default PCP/DEI values.
|
|
2:Mapped, Use mapped versions of QoS class and DP level."
|
|
::= { lcsQosEgressPortPCPRemarkingEntry 2 }
|
|
|
|
--lcsQosEgressPortPCPRemarkingSpecificTable
|
|
lcsQosEgressPortPCPRemarkingSpecificTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosEgressPortPCPRemarkingSpecificEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic Qos Egress Port PCP Remarking Specific
|
|
Configuration settings.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosEgressPortPCPRemarking 2 }
|
|
|
|
lcsQosEgressPortPCPRemarkingSpecificEntry OBJECT-TYPE
|
|
SYNTAX LCSQosEgressPortPCPRemarkingSpecificEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Egress Port PCP Remarking Specific Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosEgressPortPCPRemarkingSpecificTable 1 }
|
|
|
|
LCSQosEgressPortPCPRemarkingSpecificEntry ::= SEQUENCE {
|
|
lcsQosEgressPortPCPRemarkingSpecificPCP Integer32,
|
|
lcsQosEgressPortPCPRemarkingSpecificDEI AdminMode
|
|
}
|
|
|
|
lcsQosEgressPortPCPRemarkingSpecificPCP OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the specific PCP
|
|
Range : 0-7"
|
|
::= { lcsQosEgressPortPCPRemarkingSpecificEntry 2 }
|
|
|
|
lcsQosEgressPortPCPRemarkingSpecificDEI OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"controls the admin state of DEI"
|
|
::= { lcsQosEgressPortPCPRemarkingSpecificEntry 3 }
|
|
|
|
--lcsQosPortEgressTagRemarkingMapDPTable
|
|
-- lcsQosPortEgressTagRemarkingMapDPTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSQosPortEgressTagRemarkingMapDPEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Show Qos Port Egress Tag Remarking Map DP.
|
|
-- INDEX for this table is ifIndex which is
|
|
-- equivalent to the panel port number."
|
|
-- ::= { lcsQosPortEgressTagRemarking 3 }
|
|
|
|
-- lcsQosPortEgressTagRemarkingMapDPEntry OBJECT-TYPE
|
|
-- SYNTAX LCSQosPortEgressTagRemarkingMapDPEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Qos Port Egress Tag Remarking Map DP Entry."
|
|
-- INDEX { ifIndex,
|
|
-- lcsQosPortEgressTagRemarkingClassifiedDPLevel}
|
|
-- ::= { lcsQosPortEgressTagRemarkingMapDPTable 1 }
|
|
|
|
-- LCSQosPortEgressTagRemarkingMapDPEntry ::= SEQUENCE {
|
|
-- lcsQosPortEgressTagRemarkingClassifiedDPLevel Integer32,
|
|
-- lcsQosPortEgressTagRemarkingDPLevel AdminMode
|
|
-- }
|
|
|
|
-- lcsQosPortEgressTagRemarkingClassifiedDPLevel OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..4)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "range: 1-4."
|
|
-- ::= { lcsQosPortEgressTagRemarkingMapDPEntry 2 }
|
|
|
|
-- lcsQosPortEgressTagRemarkingDPLevel OBJECT-TYPE
|
|
-- SYNTAX AdminMode
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "admin state of Tag remark"
|
|
-- ::= { lcsQosPortEgressTagRemarkingMapDPEntry 3 }
|
|
|
|
--lcsQosEgressPortPCPRemarkingMappedTable
|
|
lcsQosEgressPortPCPRemarkingMappedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosEgressPortPCPRemarkingMappedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show Qos Egress Port PCP Remarking Mapped.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosEgressPortPCPRemarking 4 }
|
|
|
|
lcsQosEgressPortPCPRemarkingMappedEntry OBJECT-TYPE
|
|
SYNTAX LCSQosEgressPortPCPRemarkingMappedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Egress Port PCP Remarking Mapped Entry."
|
|
INDEX { ifIndex,
|
|
lcsQosEgressPortPCPRemarkingMappedQueuePriority,
|
|
lcsQosEgressPortPCPRemarkingMappedDPLevel }
|
|
::= { lcsQosEgressPortPCPRemarkingMappedTable 1 }
|
|
|
|
LCSQosEgressPortPCPRemarkingMappedEntry ::= SEQUENCE {
|
|
lcsQosEgressPortPCPRemarkingMappedQueuePriority INTEGER,
|
|
lcsQosEgressPortPCPRemarkingMappedDPLevel INTEGER,
|
|
lcsQosEgressPortPCPRemarkingMappedPCP Integer32,
|
|
lcsQosEgressPortPCPRemarkingMappedDEI Integer32
|
|
}
|
|
|
|
lcsQosEgressPortPCPRemarkingMappedQueuePriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
class0(1),
|
|
class1(2),
|
|
class2(3),
|
|
class3(4),
|
|
class4(5),
|
|
class5(6),
|
|
class6(7),
|
|
class7(8)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 1-8,
|
|
QoS Class0: 1, QoS Class1: 2..."
|
|
::= { lcsQosEgressPortPCPRemarkingMappedEntry 2 }
|
|
|
|
lcsQosEgressPortPCPRemarkingMappedDPLevel OBJECT-TYPE
|
|
SYNTAX INTEGER { level0(1), level1(2) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 1-2,
|
|
DP Level0: 1, DP Level1: 2."
|
|
::= { lcsQosEgressPortPCPRemarkingMappedEntry 3 }
|
|
|
|
lcsQosEgressPortPCPRemarkingMappedPCP OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 0-7."
|
|
::= { lcsQosEgressPortPCPRemarkingMappedEntry 4 }
|
|
|
|
lcsQosEgressPortPCPRemarkingMappedDEI OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 0-1."
|
|
::= { lcsQosEgressPortPCPRemarkingMappedEntry 5 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosPortDSCP group
|
|
-- =======================================================================================================================
|
|
--lcsQosPortDSCPTable
|
|
lcsQosPortDSCPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosPortDSCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic QoS Port DSCP Configuration settings.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosPortDSCP 1 }
|
|
|
|
lcsQosPortDSCPEntry OBJECT-TYPE
|
|
SYNTAX LCSQosPortDSCPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Port DSCP Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosPortDSCPTable 1 }
|
|
|
|
LCSQosPortDSCPEntry ::= SEQUENCE {
|
|
lcsQosPortDSCPIngressTranslate AdminMode,
|
|
lcsQosPortDSCPIngressClassify INTEGER,
|
|
lcsQosPortDSCPEgressRewrite INTEGER
|
|
}
|
|
|
|
lcsQosPortDSCPIngressTranslate OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure DSCP ingress translation mode."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortDSCPEntry 2 }
|
|
|
|
lcsQosPortDSCPIngressClassify OBJECT-TYPE
|
|
SYNTAX INTEGER { disable (0), dscp (1), selected (2), all(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classification for a port have 4 different values.
|
|
0: disable,
|
|
1: DSCP=0,
|
|
2: Selected,
|
|
3: All."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortDSCPEntry 3 }
|
|
|
|
lcsQosPortDSCPEgressRewrite OBJECT-TYPE
|
|
SYNTAX INTEGER { disable (0),enable (1),
|
|
remap (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the port egress rewriting mode.
|
|
0: Disable,1: Enable,2: Remap,range: 0-2"
|
|
::= { lcsQosPortDSCPEntry 4 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosDSCPBasedQoS group
|
|
-- =======================================================================================================================
|
|
lcsQosDSCPBasedQoSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosDSCPBasedQoSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configure the basic Qos DSCP-Based QoS Ingress Classification settings for all switches."
|
|
::= { lcsQosDSCPBasedQoS 1 }
|
|
|
|
lcsQosDSCPBasedQoSEntry OBJECT-TYPE
|
|
SYNTAX LCSQosDSCPBasedQoSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos DSCP Based QoS Entry."
|
|
INDEX { lcsQosDSCPBasedQoSList }
|
|
::= { lcsQosDSCPBasedQoSTable 1 }
|
|
|
|
LCSQosDSCPBasedQoSEntry ::= SEQUENCE {
|
|
lcsQosDSCPBasedQoSList Integer32,
|
|
lcsQosDSCPBasedQoSDSCP DisplayString,
|
|
lcsQosDSCPBasedQoSTrust AdminMode,
|
|
lcsQosDSCPBasedQoSQueuePriority Integer32,
|
|
lcsQosDSCPBasedQoSDPL Integer32
|
|
}
|
|
|
|
lcsQosDSCPBasedQoSList OBJECT-TYPE
|
|
SYNTAX Integer32(1..64)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP mapping table index(1-64)."
|
|
::= { lcsQosDSCPBasedQoSEntry 1 }
|
|
|
|
lcsQosDSCPBasedQoSDSCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of supported DSCP values are 64."
|
|
::= { lcsQosDSCPBasedQoSEntry 2 }
|
|
|
|
lcsQosDSCPBasedQoSTrust OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether a specific DSCP value is trusted. Only frames with
|
|
trusted DSCP values are mapped to a specific QoS class
|
|
and Drop Precedence
|
|
Level. Frames with untrusted DSCP values are
|
|
treated as a non-IP frame."
|
|
DEFVAL { disable }
|
|
::= { lcsQosDSCPBasedQoSEntry 3 }
|
|
|
|
lcsQosDSCPBasedQoSQueuePriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS class.
|
|
range: 0-7,
|
|
default: 0."
|
|
::= { lcsQosDSCPBasedQoSEntry 4 }
|
|
|
|
lcsQosDSCPBasedQoSDPL OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Precedence Level.
|
|
range: 0-1,
|
|
default: 0."
|
|
::= { lcsQosDSCPBasedQoSEntry 5 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosDSCPTranslation group
|
|
-- =======================================================================================================================
|
|
--lcsQosDSCPTranslationTable
|
|
lcsQosDSCPTranslationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosDSCPTranslationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic QoS DSCP Translation settings for all switches."
|
|
::= { lcsQosDSCPTranslation 1 }
|
|
|
|
lcsQosDSCPTranslationEntry OBJECT-TYPE
|
|
SYNTAX LCSQosDSCPTranslationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos DSCP Translation Entry."
|
|
INDEX { lcsQosDSCPTranslationList }
|
|
::= { lcsQosDSCPTranslationTable 1 }
|
|
|
|
LCSQosDSCPTranslationEntry ::= SEQUENCE {
|
|
lcsQosDSCPTranslationList Integer32,
|
|
lcsQosDSCPTranslationDSCPBasedId DisplayString,
|
|
lcsQosDSCPTranslationIngressTranslate Integer32,
|
|
lcsQosDSCPTranslationIngressClassify AdminMode,
|
|
lcsQosDSCPTranslationEgressRemap Integer32
|
|
-- lcsQosDSCPTranslationEgressRemapDP1 Integer32
|
|
}
|
|
|
|
lcsQosDSCPTranslationList OBJECT-TYPE
|
|
SYNTAX Integer32(1..64)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP translation table index(1-64)."
|
|
::= { lcsQosDSCPTranslationEntry 1 }
|
|
|
|
lcsQosDSCPTranslationDSCPBasedId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure global ingress DSCP translation table."
|
|
::= { lcsQosDSCPTranslationEntry 2 }
|
|
|
|
lcsQosDSCPTranslationIngressTranslate OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP at Ingress side can be translated to any of DSCP values.
|
|
range: 0-63,
|
|
default: 0."
|
|
::= { lcsQosDSCPTranslationEntry 3 }
|
|
|
|
lcsQosDSCPTranslationIngressClassify OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure DSCP ingress classification."
|
|
DEFVAL { disable }
|
|
::= { lcsQosDSCPTranslationEntry 4 }
|
|
|
|
lcsQosDSCPTranslationEgressRemap OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the DSCP value from select menu to which you want to remap.
|
|
range: 0-63,
|
|
default: 0."
|
|
::= { lcsQosDSCPTranslationEntry 5 }
|
|
|
|
-- lcsQosDSCPTranslationEgressRemapDP1 OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..63)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Select the DSCP value from select menu to which you want to remap.
|
|
-- range: 0-63,
|
|
-- default: 0.
|
|
-- Only support LUTON26."
|
|
-- ::= { lcsQosDSCPTranslationEntry 6 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosDSCPClassification group
|
|
-- =======================================================================================================================
|
|
--lcsQosDSCPClassificationTable
|
|
lcsQosDSCPClassificationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosDSCPClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mapping of QoS class to DSCP value."
|
|
::= { lcsQosDSCPClassification 1 }
|
|
|
|
lcsQosDSCPClassificationEntry OBJECT-TYPE
|
|
SYNTAX LCSQosDSCPClassificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos DSCP Classification Entry."
|
|
INDEX { lcsQosDSCPClassificationQoSClass }
|
|
::= { lcsQosDSCPClassificationTable 1 }
|
|
|
|
LCSQosDSCPClassificationEntry ::= SEQUENCE {
|
|
lcsQosDSCPClassificationQoSClass Integer32,
|
|
lcsQosDSCPClassificationDSCPDP0 Integer32,
|
|
lcsQosDSCPClassificationDSCPDP1 Integer32,
|
|
lcsQosDSCPClassificationDSCPDP2 Integer32,
|
|
lcsQosDSCPClassificationDSCPDP3 Integer32
|
|
}
|
|
|
|
lcsQosDSCPClassificationQoSClass OBJECT-TYPE
|
|
SYNTAX Integer32(1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This page allows you to configure the mapping of QoS class
|
|
and Drop Precedence Level to DSCP value.
|
|
range: 1-8}"
|
|
::= { lcsQosDSCPClassificationEntry 1 }
|
|
|
|
lcsQosDSCPClassificationDSCPDP0 OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the classified DSCP value.
|
|
range: 0-63,
|
|
default: 0."
|
|
::= { lcsQosDSCPClassificationEntry 2 }
|
|
|
|
lcsQosDSCPClassificationDSCPDP1 OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the classified DSCP value.
|
|
range: 0-63,
|
|
default: 0."
|
|
::= { lcsQosDSCPClassificationEntry 3 }
|
|
|
|
lcsQosDSCPClassificationDSCPDP2 OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the classified DSCP value.
|
|
range: 0-63,
|
|
default: 0."
|
|
::= { lcsQosDSCPClassificationEntry 4 }
|
|
|
|
lcsQosDSCPClassificationDSCPDP3 OBJECT-TYPE
|
|
SYNTAX Integer32(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the classified DSCP value.
|
|
range: 0-63,
|
|
default: 0."
|
|
::= { lcsQosDSCPClassificationEntry 5 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosControlList group
|
|
-- =======================================================================================================================
|
|
--lcsQosQceTable
|
|
|
|
lcsQosQceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosQceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Create Qos QCE entry."
|
|
::= { lcsQosControlList 1 }
|
|
|
|
lcsQosQceEntry OBJECT-TYPE
|
|
SYNTAX LCSQosQceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Qos Qce Entry."
|
|
INDEX { lcsQosQceIndex }
|
|
::= { lcsQosQceTable 1 }
|
|
|
|
LCSQosQceEntry ::= SEQUENCE {
|
|
lcsQosQceIndex Integer32,
|
|
lcsQosQceID Integer32,
|
|
lcsQosQceList Integer32,
|
|
-- lcsQosQcePortMembersSwitch Integer32,
|
|
lcsQosQcePortMembers DisplayString,
|
|
lcsQosQceTag DisplayString,
|
|
lcsQosQceVID DisplayString,
|
|
lcsQosPCP DisplayString,
|
|
lcsQosDEI DisplayString,
|
|
lcsQosSMAC DisplayString,
|
|
lcsQosDMACType DisplayString,
|
|
lcsQosDMACValue DisplayString,
|
|
lcsQosQceInnerTag DisplayString,
|
|
lcsQosQceInnerVID DisplayString,
|
|
lcsQosInnerPCP DisplayString,
|
|
lcsQosInnerDEI DisplayString,
|
|
lcsQosFrameType INTEGER,
|
|
lcsQosMacEtherType DisplayString,
|
|
lcsQosLLCSSAPAddr DisplayString,
|
|
lcsQosLLCDSAPAddr DisplayString,
|
|
lcsQosLLCControl DisplayString,
|
|
lcsQosSNAPPID DisplayString,
|
|
lcsQosIpv4Protocol DisplayString,
|
|
lcsQosIpv4ProtocolValue Integer32,
|
|
lcsQosIpv4ProtocolUDPSPort DisplayString,
|
|
lcsQosIpv4ProtocolUDPDPort DisplayString,
|
|
lcsQosIpv4ProtocolTCPSPort DisplayString,
|
|
lcsQosIpv4ProtocolTCPDPort DisplayString,
|
|
lcsQosIpv4SourceIp DisplayString,
|
|
lcsQosIpv4SourceMask DisplayString,
|
|
lcsQosIpv4DestIp DisplayString,
|
|
lcsQosIpv4DestMask DisplayString,
|
|
lcsQosIpv4IPFragment INTEGER,
|
|
lcsQosIpv4DSCP DisplayString,
|
|
lcsQosIpv6Protocol DisplayString,
|
|
lcsQosIpv6ProtocolValue Integer32,
|
|
lcsQosIpv6ProtocolUDPSPort DisplayString,
|
|
lcsQosIpv6ProtocolUDPDPort DisplayString,
|
|
lcsQosIpv6ProtocolTCPSPort DisplayString,
|
|
lcsQosIpv6ProtocolTCPDPort DisplayString,
|
|
lcsQosIpv6SourceIp DisplayString,
|
|
lcsQosIpv6SourceMask DisplayString,
|
|
lcsQosIpv6DestIp DisplayString,
|
|
lcsQosIpv6DestMask DisplayString,
|
|
lcsQosIpv6DSCP DisplayString,
|
|
lcsQosActionQueuePriority Integer32,
|
|
lcsQosActionDPL Integer32,
|
|
lcsQosActionDSCP Integer32,
|
|
lcsQosActionPCP Integer32,
|
|
lcsQosActionDEI Integer32,
|
|
lcsQosActionPolicy Integer32,
|
|
lcsQosActionIngressMapID Integer32,
|
|
lcsQosQceRowStatus RowStatus
|
|
}
|
|
|
|
lcsQosQceIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..256)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the index to this table."
|
|
::= { lcsQosQceEntry 1 }
|
|
|
|
lcsQosQceID OBJECT-TYPE
|
|
SYNTAX Integer32(1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the QCE ID is specified and an entry with this QCE ID
|
|
already exists, the QCE will be modified. Otherwise, a
|
|
new QCE will be added.
|
|
range : 1 - 256."
|
|
::= { lcsQosQceEntry 2 }
|
|
|
|
lcsQosQceList OBJECT-TYPE
|
|
SYNTAX Integer32(0..256)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the QCE List is non zero, the QCE will be placed in the list.
|
|
If the QCE List is zero, the QCE will be placed last in the list.
|
|
range : 0 - 256."
|
|
::= { lcsQosQceEntry 3 }
|
|
|
|
-- lcsQosQcePortMembersSwitch OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Switch number for port members.
|
|
-- -1:Any.
|
|
-- Only support stacking switch."
|
|
-- ::= { lcsQosQceEntry 4 }
|
|
|
|
lcsQosQcePortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the ingress port of the QCE. Possible values are:
|
|
All: The QCE will match all ingress port.
|
|
Port: The QCE will match a specific ingress port.Format: 1,3-6."
|
|
::= { lcsQosQceEntry 5 }
|
|
|
|
lcsQosQceTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'Any', 'Untagged' or 'Tagged' or 'C-Tag' or 'S-Tag'"
|
|
::= { lcsQosQceEntry 6 }
|
|
|
|
lcsQosQceVID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid value of VLAN ID can be any value in
|
|
'Specific 1~4094' or 'range 1-4094' or 'Any'."
|
|
::= { lcsQosQceEntry 7 }
|
|
|
|
lcsQosPCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority Code Point: Valid value PCP are
|
|
specific(0, 1, 2, 3, 4, 5, 6, 7)
|
|
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'."
|
|
::= { lcsQosQceEntry 8 }
|
|
|
|
lcsQosDEI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Eligible Indicator: Valid value of DEI can be
|
|
any of values between 0, 1 or 'Any'."
|
|
::= { lcsQosQceEntry 9 }
|
|
|
|
lcsQosSMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'."
|
|
::= { lcsQosQceEntry 10 }
|
|
|
|
lcsQosDMACType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC type: possible values are 'UC'(unicast),
|
|
'MC'(multicast), 'BC'(broadcast), 'SP'(Specific) or 'Any'."
|
|
::= { lcsQosQceEntry 11 }
|
|
|
|
lcsQosDMACValue OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when QosDMACType is 'SP'(specific) can set mac address.
|
|
"
|
|
::= { lcsQosQceEntry 12 }
|
|
|
|
lcsQosQceInnerTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of Inner Tag field can be 'Any', 'Untagged' or 'Tagged' or
|
|
'C-tagged' or 'S-tagged'."
|
|
::= { lcsQosQceEntry 13 }
|
|
|
|
lcsQosQceInnerVID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid value of Inner VLAN ID can be any value in
|
|
'Specific 1~4094' or 'range 1-4094' or 'Any'.
|
|
"
|
|
::= { lcsQosQceEntry 14 }
|
|
|
|
lcsQosInnerPCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid value Inner PCP are specific(0, 1, 2, 3, 4, 5, 6, 7)
|
|
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
|
|
"
|
|
::= { lcsQosQceEntry 15 }
|
|
|
|
lcsQosInnerDEI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid value of Inner DEI can be any of values between
|
|
0, 1 or 'Any'.
|
|
"
|
|
::= { lcsQosQceEntry 16 }
|
|
|
|
lcsQosFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
any(1),
|
|
ethernet(2),
|
|
llc(3),
|
|
snap(4),
|
|
ipv4(5),
|
|
ipv6(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Type can have any of the following values:
|
|
1: Any,
|
|
2: Ethernet,
|
|
3: LLC,
|
|
4: SNAP,
|
|
5: IPv4,
|
|
6: IPv6."
|
|
::= { lcsQosQceEntry 17 }
|
|
|
|
lcsQosMacEtherType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
|
|
but excluding 0x800(IPv4) and 0x86DD(IPv6),
|
|
range: 0000-FFFF,
|
|
default: Any."
|
|
::= { lcsQosQceEntry 18 }
|
|
|
|
lcsQosLLCSSAPAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid SSAP(Source Service Access Point) can vary from
|
|
0x00 to 0xFF or 'Any',
|
|
range: 00-FF,
|
|
default: Any."
|
|
::= { lcsQosQceEntry 19 }
|
|
|
|
lcsQosLLCDSAPAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid DSAP(Destination Service Access Point) can
|
|
vary from 0x00 to 0xFF or 'Any',
|
|
range: 00-FF,
|
|
default: Any."
|
|
::= { lcsQosQceEntry 20 }
|
|
|
|
lcsQosLLCControl OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid Control field can vary from 0x00 to 0xFF or 'Any',
|
|
range: 00-FF,
|
|
default: Any."
|
|
::= { lcsQosQceEntry 21 }
|
|
|
|
lcsQosSNAPPID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid PID(a.k.a ethernet type) can have value within
|
|
0x00-0xFFFF or 'Any',
|
|
range: 0000-FFFF,
|
|
default: Any."
|
|
::= { lcsQosQceEntry 22 }
|
|
|
|
lcsQosIpv4Protocol OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP protocol number: (Other, TCP or UDP) or 'Any'."
|
|
::= { lcsQosQceEntry 23 }
|
|
|
|
lcsQosIpv4ProtocolValue OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ipv4 Protocol is Other.
|
|
range: 0-255
|
|
default: 0."
|
|
::= { lcsQosQceEntry 24 }
|
|
|
|
lcsQosIpv4ProtocolUDPSPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source TCP/UDP Port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 25 }
|
|
|
|
lcsQosIpv4ProtocolUDPDPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination TCP/UDP port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 26 }
|
|
|
|
lcsQosIpv4ProtocolTCPSPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source TCP/UDP port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 27 }
|
|
|
|
lcsQosIpv4ProtocolTCPDPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination TCP/UDP port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 28 }
|
|
|
|
lcsQosIpv4SourceIp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specific Source IP address in value format or value 0.0.0.0 is 'Any'.
|
|
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
|
|
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223."
|
|
::= { lcsQosQceEntry 29 }
|
|
|
|
lcsQosIpv4SourceMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specific Source IP address in mask format or value 0.0.0.0 is 'Any'."
|
|
::= { lcsQosQceEntry 30 }
|
|
|
|
lcsQosIpv4DestIp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specific Destination IP address in value format or value 0.0.0.0 is 'Any'.
|
|
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
|
|
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223."
|
|
::= { lcsQosQceEntry 31 }
|
|
|
|
lcsQosIpv4DestMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specific Destination IP address in mask format or value 0.0.0.0 is 'Any'."
|
|
::= { lcsQosQceEntry 32 }
|
|
|
|
lcsQosIpv4IPFragment OBJECT-TYPE
|
|
SYNTAX INTEGER { any(0), no(1), yes(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 frame fragmented option:
|
|
2: yes,
|
|
1: no,
|
|
0: any."
|
|
::= { lcsQosQceEntry 33 }
|
|
|
|
lcsQosIpv4DSCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Diffserv Code Point value (DSCP): It can be a specific value,
|
|
range of values or 'Any'. DSCP values are in the range 0-63."
|
|
::= { lcsQosQceEntry 34 }
|
|
|
|
lcsQosIpv6Protocol OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP protocol number: (Other, TCP or UDP) or 'Any'."
|
|
::= { lcsQosQceEntry 35 }
|
|
|
|
lcsQosIpv6ProtocolValue OBJECT-TYPE
|
|
SYNTAX Integer32(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when IPv6 protocol is Other ,
|
|
range: 0-255."
|
|
::= { lcsQosQceEntry 36 }
|
|
|
|
lcsQosIpv6ProtocolUDPSPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source TCP/UDP port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 37 }
|
|
|
|
lcsQosIpv6ProtocolUDPDPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination TCP/UDP port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 38 }
|
|
|
|
lcsQosIpv6ProtocolTCPSPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source TCP/UDP port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 39 }
|
|
|
|
|
|
lcsQosIpv6ProtocolTCPDPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination TCP/UDP port:(0-65535) or 'Any',
|
|
specific or port range applicable for IP protocol UDP/TCP."
|
|
::= { lcsQosQceEntry 40 }
|
|
|
|
lcsQosIpv6SourceIp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits."
|
|
::= { lcsQosQceEntry 41 }
|
|
|
|
lcsQosIpv6SourceMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits."
|
|
::= { lcsQosQceEntry 42 }
|
|
|
|
lcsQosIpv6DestIp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 destination address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits."
|
|
::= { lcsQosQceEntry 43 }
|
|
|
|
lcsQosIpv6DestMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits."
|
|
::= { lcsQosQceEntry 44 }
|
|
|
|
lcsQosIpv6DSCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Diffserv Code Point value (DSCP): It can be a specific value,
|
|
range of values or 'Any'. DSCP values are in the
|
|
range 0-63 including BE,
|
|
CS1-CS7, EF or AF11-AF43."
|
|
::= { lcsQosQceEntry 45 }
|
|
|
|
lcsQosActionQueuePriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS class: (0-7) or 8: Default."
|
|
::= { lcsQosQceEntry 46 }
|
|
|
|
lcsQosActionDPL OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-4. 4: Default"
|
|
::= { lcsQosQceEntry 47 }
|
|
|
|
lcsQosActionDSCP OBJECT-TYPE
|
|
SYNTAX Integer32(0..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid DSCP value can be (0-63, BE, CS1-CS7,
|
|
EF or AF11-AF43) or 64: Default."
|
|
::= { lcsQosQceEntry 48 }
|
|
|
|
lcsQosActionPCP OBJECT-TYPE
|
|
SYNTAX Integer32(0..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"pcp: (0-7) or 8: Default.
|
|
"
|
|
::= { lcsQosQceEntry 49 }
|
|
|
|
lcsQosActionDEI OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dei: (0-1) or 2: Default.
|
|
"
|
|
::= { lcsQosQceEntry 50 }
|
|
|
|
lcsQosActionPolicy OBJECT-TYPE
|
|
SYNTAX Integer32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACL Policy number: (0-127) or 'empty'(128). Default: empty.
|
|
"
|
|
::= { lcsQosQceEntry 51 }
|
|
|
|
lcsQosActionIngressMapID OBJECT-TYPE
|
|
SYNTAX Integer32(-1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classify Ingress Map ID:
|
|
Range: 0-255
|
|
Default: -1
|
|
"
|
|
::= { lcsQosQceEntry 52 }
|
|
|
|
lcsQosQceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is used
|
|
to create/delete entries. Any object in an entry of this table
|
|
may be modified while the value of the corresponding instance
|
|
of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsQosQceEntry 53 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosStormControl group
|
|
-- =======================================================================================================================
|
|
--lcsQosStormControlTable
|
|
lcsQosStormControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosStormControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic QoS DSCP Translation settings for all switches."
|
|
::= { lcsQosStormControl 1 }
|
|
|
|
lcsQosStormControlEntry OBJECT-TYPE
|
|
SYNTAX LCSQosStormControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Storm Control Entry."
|
|
INDEX { lcsQosStormControlFrameType }
|
|
::= { lcsQosStormControlTable 1 }
|
|
|
|
LCSQosStormControlEntry ::= SEQUENCE {
|
|
lcsQosStormControlFrameType INTEGER,
|
|
lcsQosStormControlEnabled AdminMode,
|
|
lcsQosStormControlRate Integer32,
|
|
lcsQosStormControlUnit Integer32
|
|
}
|
|
|
|
lcsQosStormControlFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER { unicast(1), multicast (2), broadcast (3)}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The settings in a particular row apply to the frame type listed here.
|
|
1:Unicast,
|
|
2:Multicast,
|
|
3:Broadcast."
|
|
::= { lcsQosStormControlEntry 1 }
|
|
|
|
lcsQosStormControlEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the global storm policer for the given frame type."
|
|
::= { lcsQosStormControlEntry 2 }
|
|
|
|
lcsQosStormControlRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the rate for the global storm policer."
|
|
::= { lcsQosStormControlEntry 3 }
|
|
|
|
lcsQosStormControlUnit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the global storm policer rate as fps or kfps.
|
|
0: kbps
|
|
1: Mbps
|
|
2: fps
|
|
3: kfps"
|
|
::= { lcsQosStormControlEntry 4 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosPortStormControl group
|
|
-- =======================================================================================================================
|
|
--lcsQosPortStormControlTable
|
|
lcsQosPortStormControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosPortStormControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the storm control settings.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosPortStormControl 1 }
|
|
|
|
lcsQosPortStormControlEntry OBJECT-TYPE
|
|
SYNTAX LCSQosPortStormControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Port Storm Control Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosPortStormControlTable 1 }
|
|
|
|
LCSQosPortStormControlEntry ::= SEQUENCE {
|
|
lcsQosPortStormControlUnicastEnabled AdminMode,
|
|
lcsQosPortStormControlUnicastRate Integer32,
|
|
lcsQosPortStormControlUnicastUnit Integer32,
|
|
lcsQosPortStormControlBroadcastEnabled AdminMode,
|
|
lcsQosPortStormControlBroadcastRate Integer32,
|
|
lcsQosPortStormControlBroadcastUnit Integer32,
|
|
lcsQosPortStormControlUnknownEnabled AdminMode,
|
|
lcsQosPortStormControlUnknownRate Integer32,
|
|
lcsQosPortStormControlUnknownUnit Integer32
|
|
}
|
|
|
|
lcsQosPortStormControlUnicastEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the storm control is enabled on this
|
|
switch port."
|
|
::= { lcsQosPortStormControlEntry 2 }
|
|
|
|
lcsQosPortStormControlUnicastRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the rate for the storm control."
|
|
::= { lcsQosPortStormControlEntry 3 }
|
|
|
|
lcsQosPortStormControlUnicastUnit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the storm control rate.
|
|
0: kbps
|
|
1: Mbps
|
|
2: fps
|
|
3: kfps"
|
|
::= { lcsQosPortStormControlEntry 4 }
|
|
|
|
lcsQosPortStormControlBroadcastEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the storm control is enabled on this
|
|
switch port."
|
|
::= { lcsQosPortStormControlEntry 5 }
|
|
|
|
lcsQosPortStormControlBroadcastRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the rate for the storm control."
|
|
::= { lcsQosPortStormControlEntry 6 }
|
|
|
|
lcsQosPortStormControlBroadcastUnit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the storm control rate.
|
|
0: kbps
|
|
1: Mbps
|
|
2: fps
|
|
3: kfps"
|
|
::= { lcsQosPortStormControlEntry 7 }
|
|
|
|
lcsQosPortStormControlUnknownEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the storm control is enabled on this
|
|
switch port."
|
|
::= { lcsQosPortStormControlEntry 8 }
|
|
|
|
lcsQosPortStormControlUnknownRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the rate for the storm control."
|
|
::= { lcsQosPortStormControlEntry 9 }
|
|
|
|
lcsQosPortStormControlUnknownUnit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the storm control rate.
|
|
0: kbps
|
|
1: Mbps
|
|
2: fps
|
|
3: kfps"
|
|
::= { lcsQosPortStormControlEntry 10 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosWRED group
|
|
-- =======================================================================================================================
|
|
--lcsQosWREDTable
|
|
lcsQosWREDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosWREDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic QoS DSCP Translation settings for all switches."
|
|
::= { lcsQosWRED 1 }
|
|
|
|
lcsQosWREDEntry OBJECT-TYPE
|
|
SYNTAX LCSQosWREDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos WRED Entry."
|
|
INDEX { lcsQosWREDQueue }
|
|
::= { lcsQosWREDTable 1 }
|
|
|
|
LCSQosWREDEntry ::= SEQUENCE {
|
|
lcsQosWREDGroupIndex Integer32,
|
|
lcsQosWREDQueue Integer32,
|
|
lcsQosWREDDPL Integer32,
|
|
lcsQosWREDEnable AdminMode,
|
|
lcsQosWREDMinThreshold Integer32,
|
|
lcsQosWREDMaxThreshold Integer32,
|
|
lcsQosWREDMaxUnit INTEGER
|
|
}
|
|
|
|
lcsQosWREDGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group number for which the configuration
|
|
below applies."
|
|
::= { lcsQosWREDEntry 1 }
|
|
|
|
lcsQosWREDQueue OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue number (QoS class) for which the configuration
|
|
below applies."
|
|
::= { lcsQosWREDEntry 2 }
|
|
|
|
lcsQosWREDDPL OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dpl number for which the configuration
|
|
below applies."
|
|
::= { lcsQosWREDEntry 3 }
|
|
|
|
|
|
lcsQosWREDEnable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether RED is enabled for this queue.
|
|
"
|
|
DEFVAL { disable }
|
|
::= { lcsQosWREDEntry 4 }
|
|
|
|
lcsQosWREDMinThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the lower RED fill level threshold. If the queue filling
|
|
level is below this threshold, the drop probability is zero.
|
|
range:0-100%,
|
|
default: 0.
|
|
"
|
|
::= { lcsQosWREDEntry 5 }
|
|
|
|
lcsQosWREDMaxThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the upper RED drop probability or fill level threshold
|
|
for frames marked with Drop Precedence Level 1 (yellow frames).
|
|
range:0-100%,
|
|
default: 50.
|
|
"
|
|
::= { lcsQosWREDEntry 6 }
|
|
|
|
lcsQosWREDMaxUnit OBJECT-TYPE
|
|
SYNTAX INTEGER {dropProbability (0), fillLevel (1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selects the unit for Max.
|
|
0: Drop Probability,
|
|
1: Fill Level,
|
|
default: Drop Probability.
|
|
"
|
|
DEFVAL { dropProbability }
|
|
::= { lcsQosWREDEntry 7 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsQosQCLStatus
|
|
-- =======================================================================================================================
|
|
|
|
--lcsQosQCLStatusTable
|
|
lcsQosQCLStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosQCLStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic QoS DSCP Translation settings for all switches."
|
|
::= { lcsQosQCLStatus 1 }
|
|
|
|
lcsQosQCLStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSQosQCLStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos QCL Status Entry."
|
|
INDEX { lcsQosQCLStatusList }
|
|
::= { lcsQosQCLStatusTable 1 }
|
|
|
|
LCSQosQCLStatusEntry ::= SEQUENCE {
|
|
lcsQosQCLStatusList Integer32,
|
|
lcsQosQCLStatusUser DisplayString,
|
|
lcsQosQCLStatusQCEId DisplayString,
|
|
lcsQosQCLStatusFrameType DisplayString,
|
|
lcsQosQCLStatusPortlist DisplayString,
|
|
lcsQosQCLStatusActionQueuePriority DisplayString,
|
|
lcsQosQCLStatusActionDPL DisplayString,
|
|
lcsQosQCLStatusActionDSCP DisplayString,
|
|
lcsQosQCLStatusActionPCP DisplayString,
|
|
lcsQosQCLStatusActionDEL DisplayString,
|
|
lcsQosQCLStatusActionPolicy DisplayString,
|
|
lcsQosQCLStatusConflict DisplayString,
|
|
-- lcsQosQCLStatusSwitch Integer32,
|
|
lcsQosQCLStatusDMAC DisplayString,
|
|
lcsQosQCLStatusSMAC DisplayString,
|
|
lcsQosQCLStatusTag DisplayString,
|
|
lcsQosQCLStatusVID DisplayString,
|
|
lcsQosQCLStatusPCP DisplayString,
|
|
lcsQosQCLStatusDEI DisplayString
|
|
}
|
|
|
|
lcsQosQCLStatusList OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QCL table index."
|
|
::= { lcsQosQCLStatusEntry 1}
|
|
|
|
lcsQosQCLStatusUser OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the QCL user."
|
|
::= { lcsQosQCLStatusEntry 2 }
|
|
|
|
lcsQosQCLStatusQCEId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the index of QCE."
|
|
::= { lcsQosQCLStatusEntry 3}
|
|
|
|
lcsQosQCLStatusFrameType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of frame to look for incomming frames.
|
|
Any: The QCE will match all frame type.
|
|
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF)
|
|
are allowed.
|
|
LLC: Only (LLC) frames are allowed.
|
|
SNAP: Only (SNAP) frames are allowed.
|
|
IPv4: The QCE will match only IPV4 frames.
|
|
IPv6: The QCE will match only IPV6 frames."
|
|
::= { lcsQosQCLStatusEntry 4}
|
|
|
|
lcsQosQCLStatusPortlist OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the list of ports configured with the QCE."
|
|
::= { lcsQosQCLStatusEntry 5}
|
|
|
|
lcsQosQCLStatusActionQueuePriority OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classified QoS class; if a frame matches the
|
|
QCE it will be put in the queue."
|
|
::= { lcsQosQCLStatusEntry 6}
|
|
|
|
lcsQosQCLStatusActionDPL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Precedence Level; if a frame matches the QCE then
|
|
DP level will set to value displayed under DPL column."
|
|
::= { lcsQosQCLStatusEntry 7}
|
|
|
|
lcsQosQCLStatusActionDSCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If a frame matches the QCE then DSCP will be
|
|
classified with the value
|
|
displayed under DSCP column."
|
|
::= { lcsQosQCLStatusEntry 8}
|
|
|
|
lcsQosQCLStatusActionPCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classify PCP value.
|
|
Only support SERVAL."
|
|
::= { lcsQosQCLStatusEntry 9}
|
|
|
|
lcsQosQCLStatusActionDEL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classify DEI value.
|
|
Only support SERVAL."
|
|
::= { lcsQosQCLStatusEntry 10}
|
|
|
|
lcsQosQCLStatusActionPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classify ACL Policy number.
|
|
"
|
|
::= { lcsQosQCLStatusEntry 11}
|
|
|
|
lcsQosQCLStatusConflict OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays Conflict status of QCL entries."
|
|
::= { lcsQosQCLStatusEntry 12}
|
|
|
|
-- lcsQosQCLStatusSwitch OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Switch number for port members. -1:Any.
|
|
-- Only support stacking switch."
|
|
-- ::= { lcsQosQCLStatusEntry 13}
|
|
|
|
lcsQosQCLStatusDMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC address: Possible values are 'Unicast', 'Multicast', 'Broadcast' or 'Any'."
|
|
::= { lcsQosQCLStatusEntry 14}
|
|
|
|
lcsQosQCLStatusSMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'."
|
|
::= { lcsQosQCLStatusEntry 15}
|
|
|
|
lcsQosQCLStatusTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of Tag field can be 'Untagged', 'Tagged', 'C-Tagged', 'S-Tagged' or 'Any'."
|
|
::= { lcsQosQCLStatusEntry 16}
|
|
|
|
lcsQosQCLStatusVID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid value of VLAN ID can be any value in the range 1-4094 or 'Any'"
|
|
::= { lcsQosQCLStatusEntry 17}
|
|
|
|
lcsQosQCLStatusPCP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'."
|
|
::= { lcsQosQCLStatusEntry 18}
|
|
|
|
lcsQosQCLStatusDEI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid value of DEI can be '0', '1' or 'Any'."
|
|
::= { lcsQosQCLStatusEntry 19}
|
|
|
|
lcsQosPortShaperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosPortShaperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosPortShapers 1 }
|
|
|
|
lcsQosPortShaperEntry OBJECT-TYPE
|
|
SYNTAX LCSQosPortShaperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Port Shaper Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosPortShaperTable 1 }
|
|
|
|
LCSQosPortShaperEntry ::= SEQUENCE {
|
|
lcsQosPortShaperQueue0Enable AdminMode,
|
|
lcsQosPortShaperQueue0Rate Integer32,
|
|
lcsQosPortShaperQueue0Unit Integer32,
|
|
lcsQosPortShaperQueue1Enable AdminMode,
|
|
lcsQosPortShaperQueue1Rate Integer32,
|
|
lcsQosPortShaperQueue1Unit Integer32,
|
|
lcsQosPortShaperQueue2Enable AdminMode,
|
|
lcsQosPortShaperQueue2Rate Integer32,
|
|
lcsQosPortShaperQueue2Unit Integer32,
|
|
lcsQosPortShaperQueue3Enable AdminMode,
|
|
lcsQosPortShaperQueue3Rate Integer32,
|
|
lcsQosPortShaperQueue3Unit Integer32,
|
|
lcsQosPortShaperQueue4Enable AdminMode,
|
|
lcsQosPortShaperQueue4Rate Integer32,
|
|
lcsQosPortShaperQueue4Unit Integer32,
|
|
lcsQosPortShaperQueue5Enable AdminMode,
|
|
lcsQosPortShaperQueue5Rate Integer32,
|
|
lcsQosPortShaperQueue5Unit Integer32,
|
|
lcsQosPortShaperQueue6Enable AdminMode,
|
|
lcsQosPortShaperQueue6Rate Integer32,
|
|
lcsQosPortShaperQueue6Unit Integer32,
|
|
lcsQosPortShaperQueue7Enable AdminMode,
|
|
lcsQosPortShaperQueue7Rate Integer32,
|
|
lcsQosPortShaperQueue7Unit Integer32,
|
|
lcsQosPortShaperEnable AdminMode,
|
|
lcsQosPortShaperRate Integer32,
|
|
lcsQosPortShaperRateType Integer32
|
|
}
|
|
|
|
lcsQosPortShaperQueue0Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 3 }
|
|
|
|
lcsQosPortShaperQueue0Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 4 }
|
|
|
|
lcsQosPortShaperQueue0Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 5 }
|
|
|
|
lcsQosPortShaperQueue1Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 6 }
|
|
|
|
lcsQosPortShaperQueue1Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 7 }
|
|
|
|
lcsQosPortShaperQueue1Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 8 }
|
|
|
|
lcsQosPortShaperQueue2Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 9 }
|
|
|
|
lcsQosPortShaperQueue2Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 10 }
|
|
|
|
lcsQosPortShaperQueue2Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 11 }
|
|
|
|
lcsQosPortShaperQueue3Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 12 }
|
|
|
|
lcsQosPortShaperQueue3Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 13 }
|
|
|
|
lcsQosPortShaperQueue3Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 14 }
|
|
|
|
lcsQosPortShaperQueue4Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 15 }
|
|
|
|
lcsQosPortShaperQueue4Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 16 }
|
|
|
|
lcsQosPortShaperQueue4Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 17 }
|
|
|
|
lcsQosPortShaperQueue5Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 18 }
|
|
|
|
lcsQosPortShaperQueue5Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 19 }
|
|
|
|
lcsQosPortShaperQueue5Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 20 }
|
|
|
|
lcsQosPortShaperQueue6Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 21 }
|
|
|
|
lcsQosPortShaperQueue6Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 22 }
|
|
|
|
lcsQosPortShaperQueue6Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 23 }
|
|
|
|
lcsQosPortShaperQueue7Enable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper is enabled on this switch port."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 24 }
|
|
|
|
lcsQosPortShaperQueue7Rate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the queue shaper rate.
|
|
default: 500(Kbps)"
|
|
::= { lcsQosPortShaperEntry 25 }
|
|
|
|
lcsQosPortShaperQueue7Unit OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the unit of measure for the queue shaper rate as kbps or Mbps.
|
|
range:
|
|
0:kbs
|
|
1:Mbps
|
|
default: 0(kbps)"
|
|
::= { lcsQosPortShaperEntry 26 }
|
|
|
|
lcsQosPortShaperEnable OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the port shaper is enabled."
|
|
DEFVAL { disable }
|
|
::= { lcsQosPortShaperEntry 27 }
|
|
|
|
lcsQosPortShaperRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the rate for the port shaper.
|
|
default: 500 kbps."
|
|
::= { lcsQosPortShaperEntry 28 }
|
|
|
|
lcsQosPortShaperRateType OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate type of the port shaper.
|
|
0:Line
|
|
1:Data"
|
|
::= { lcsQosPortShaperEntry 29 }
|
|
|
|
lcsQosPortSchedulersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSQosPortSchedulersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsQosPortSchedulers 1 }
|
|
|
|
lcsQosPortSchedulersEntry OBJECT-TYPE
|
|
SYNTAX LCSQosPortSchedulersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Qos Port Shaper Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsQosPortSchedulersTable 1 }
|
|
|
|
LCSQosPortSchedulersEntry ::= SEQUENCE {
|
|
lcsQosPortSchedulersMode Integer32,
|
|
lcsQosPortSchedulersQ0Weight Integer32,
|
|
lcsQosPortSchedulersQ1Weight Integer32,
|
|
lcsQosPortSchedulersQ2Weight Integer32,
|
|
lcsQosPortSchedulersQ3Weight Integer32,
|
|
lcsQosPortSchedulersQ4Weight Integer32,
|
|
lcsQosPortSchedulersQ5Weight Integer32,
|
|
lcsQosPortSchedulersQ6Weight Integer32,
|
|
lcsQosPortSchedulersQ7Weight Integer32
|
|
}
|
|
|
|
lcsQosPortSchedulersMode OBJECT-TYPE
|
|
SYNTAX Integer32(0|8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Strict Priority
|
|
8:Weighted"
|
|
::= { lcsQosPortSchedulersEntry 2 }
|
|
|
|
lcsQosPortSchedulersQ0Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 3 }
|
|
|
|
lcsQosPortSchedulersQ1Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 4 }
|
|
|
|
lcsQosPortSchedulersQ2Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 5 }
|
|
|
|
lcsQosPortSchedulersQ3Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 6 }
|
|
|
|
lcsQosPortSchedulersQ4Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 7 }
|
|
|
|
lcsQosPortSchedulersQ5Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 8 }
|
|
|
|
lcsQosPortSchedulersQ6Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 9 }
|
|
|
|
lcsQosPortSchedulersQ7Weight OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls the weight for this queue. This value is restricted to 1-100."
|
|
::= { lcsQosPortSchedulersEntry 10 }
|
|
|
|
-- =======================================================================================================================
|
|
--lcsBroadcastStormProtection OBJECT IDENTIFIER ::= { lcsConfiguration 11 }
|
|
--
|
|
--lcsBroadcastStormProtectionConfigurationTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF LCSBroadcastStormProtectionConfigurationEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Show Broadcast Storm Protection configurations. "
|
|
-- ::= { lcsBroadcastStormProtection 1 }
|
|
--
|
|
--lcsBroadcastStormProtectionConfigurationEntry OBJECT-TYPE
|
|
-- SYNTAX LCSBroadcastStormProtectionConfigurationEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- INDEX { lcsBroadcastStormProtectionConfPort }
|
|
-- ::= { lcsBroadcastStormProtectionConfigurationTable 1 }
|
|
--
|
|
--LCSBroadcastStormProtectionConfigurationEntry ::= SEQUENCE {
|
|
-- lcsBroadcastStormProtectionConfPort Integer32,
|
|
-- lcsBroadcastStormProtectionConfMode INTEGER,
|
|
-- lcsBroadcastStormProtectionConfAction Integer32,
|
|
-- lcsBroadcastStormProtectionConfPPS Integer32,
|
|
-- lcsBroadcastStormProtectionConfTimer Integer32,
|
|
-- lcsBroadcastStormProtectionConfstatus DisplayString
|
|
--}
|
|
--
|
|
--lcsBroadcastStormProtectionConfPort OBJECT-TYPE
|
|
-- SYNTAX Integer32 (1..4094)
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " port, range : 1 - port number. "
|
|
-- ::= { lcsBroadcastStormProtectionConfigurationEntry 1 }
|
|
--
|
|
--lcsBroadcastStormProtectionConfMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER { disable(0), enable(1)}
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Configure broadcast storm protection port mode.
|
|
-- 0: disable,
|
|
-- 1: enable
|
|
-- default: disable. "
|
|
-- ::= { lcsBroadcastStormProtectionConfigurationEntry 2 }
|
|
--
|
|
--lcsBroadcastStormProtectionConfAction OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0..2)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Configure broadcast storm protection port action.
|
|
-- 0: Shutdown port,
|
|
-- 1: Shutdown port and Log,
|
|
-- 2: Log Only,
|
|
-- default: Shutdown port. "
|
|
-- ::= { lcsBroadcastStormProtectionConfigurationEntry 3 }
|
|
--
|
|
--lcsBroadcastStormProtectionConfPPS OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0..1000000)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Configure broadcast storm protection pps.
|
|
-- default: 0. "
|
|
-- ::= { lcsBroadcastStormProtectionConfigurationEntry 4 }
|
|
--
|
|
--lcsBroadcastStormProtectionConfTimer OBJECT-TYPE
|
|
-- SYNTAX Integer32 (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Configure broadcast storm protection timer(seconds)
|
|
-- default: 300(seconds). "
|
|
-- ::= { lcsBroadcastStormProtectionConfigurationEntry 5 }
|
|
--
|
|
--lcsBroadcastStormProtectionConfstatus OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Show broadcast storm protection status. "
|
|
-- ::= { lcsBroadcastStormProtectionConfigurationEntry 6 }
|
|
--
|
|
-- =======================================================================================================================
|
|
lcsLoopProtection OBJECT IDENTIFIER ::= { lcsConfiguration 12 }
|
|
|
|
lcsLoopProtectionConfig OBJECT IDENTIFIER ::= { lcsLoopProtection 1 }
|
|
|
|
lcsLoopProtectionGlobalEnable OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure loop protection mode.
|
|
0: disable,
|
|
1: enable,
|
|
default: disable. "
|
|
::= { lcsLoopProtectionConfig 1 }
|
|
|
|
lcsLoopProtectionTranmisstionTime OBJECT-TYPE
|
|
SYNTAX Integer32(1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure loop protection transmit interval.
|
|
default: 5,
|
|
range: 1-10. "
|
|
::= { lcsLoopProtectionConfig 2 }
|
|
|
|
lcsLoopProtectionShutdownTime OBJECT-TYPE
|
|
SYNTAX Integer32(0..604800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure loop protection shutdown time.
|
|
default: 180,
|
|
range: 0-604800. "
|
|
::= { lcsLoopProtectionConfig 3 }
|
|
|
|
lcsLoopProtectionConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLoopProtectionConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show Loop Protection configurations. "
|
|
::= { lcsLoopProtectionConfig 4 }
|
|
|
|
lcsLoopProtectionConfigurationEntry OBJECT-TYPE
|
|
SYNTAX LCSLoopProtectionConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLoopProtectionConfPort }
|
|
::= { lcsLoopProtectionConfigurationTable 1 }
|
|
|
|
LCSLoopProtectionConfigurationEntry ::= SEQUENCE {
|
|
lcsLoopProtectionConfPort Integer32,
|
|
lcsLoopProtectionConfEnable Integer32,
|
|
lcsLoopProtectionConfAction Integer32,
|
|
lcsLoopProtectionConfTxmode Integer32
|
|
}
|
|
|
|
lcsLoopProtectionConfPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port, range : 1 - port number. "
|
|
::= { lcsLoopProtectionConfigurationEntry 1 }
|
|
|
|
lcsLoopProtectionConfEnable OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure loop protection port mode.
|
|
0: disable,
|
|
1: enable,
|
|
default: enable. "
|
|
::= { lcsLoopProtectionConfigurationEntry 2 }
|
|
|
|
lcsLoopProtectionConfAction OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure loop protection port action.
|
|
0: Shutdown port,
|
|
1: Shutdown port and Log,
|
|
2: Log Only,
|
|
default: Shutdown port. "
|
|
::= { lcsLoopProtectionConfigurationEntry 3 }
|
|
|
|
lcsLoopProtectionConfTxmode OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure loop protection port transmit mode.
|
|
0: disable,
|
|
1: enable,
|
|
default: enable. "
|
|
::= { lcsLoopProtectionConfigurationEntry 4 }
|
|
|
|
lcsLoopProtectionConfActPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure loop protection act port.
|
|
0: Recipient port,
|
|
1: Source port,
|
|
2: Both,
|
|
default: Recipient port."
|
|
::= { lcsLoopProtectionConfigurationEntry 101 }
|
|
|
|
lcsLoopProtectionStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLoopProtectionStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show Loop Protection Status. "
|
|
::= { lcsLoopProtection 2 }
|
|
|
|
lcsLoopProtectionStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSLoopProtectionStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLoopProtectionStatusPort }
|
|
::= { lcsLoopProtectionStatusTable 1 }
|
|
|
|
LCSLoopProtectionStatusEntry ::= SEQUENCE {
|
|
lcsLoopProtectionStatusPort Integer32,
|
|
lcsLoopProtectionStatusAction DisplayString,
|
|
lcsLoopProtectionStatusTransmit DisplayString,
|
|
lcsLoopProtectionStatusLoops Integer32,
|
|
lcsLoopProtectionStatusStatus DisplayString,
|
|
lcsLoopProtectionStatusLoop DisplayString,
|
|
lcsLoopProtectionStatusTimeLastLoop DisplayString
|
|
}
|
|
|
|
lcsLoopProtectionStatusPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port, range : 1 - port number. "
|
|
::= { lcsLoopProtectionStatusEntry 1 }
|
|
|
|
lcsLoopProtectionStatusAction OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The currently configured port action. "
|
|
::= { lcsLoopProtectionStatusEntry 2 }
|
|
|
|
lcsLoopProtectionStatusTransmit OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The currently configured port transmit mode. "
|
|
::= { lcsLoopProtectionStatusEntry 3 }
|
|
|
|
lcsLoopProtectionStatusLoops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The number of loops detected on this port. "
|
|
::= { lcsLoopProtectionStatusEntry 4 }
|
|
|
|
lcsLoopProtectionStatusStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The current loop protection status of the port. "
|
|
::= { lcsLoopProtectionStatusEntry 5 }
|
|
|
|
lcsLoopProtectionStatusLoop OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Whether a loop is currently detected on the port. "
|
|
::= { lcsLoopProtectionStatusEntry 6 }
|
|
|
|
lcsLoopProtectionStatusTimeLastLoop OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The time of the last loop event detected. "
|
|
::= { lcsLoopProtectionStatusEntry 7 }
|
|
|
|
lcsLoopProtectionStatusActPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The currently configured act port. "
|
|
::= { lcsLoopProtectionStatusEntry 101 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsPoe OBJECT IDENTIFIER ::= { lcsConfiguration 13 }
|
|
|
|
lcsPoeStatus OBJECT IDENTIFIER ::= { lcsPoe 1 }
|
|
|
|
lcsPoeStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoeStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure PoE Scheduling Table. "
|
|
::= { lcsPoeStatus 1 }
|
|
|
|
lcsPoeStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSPoeStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoeStatusLocalPort }
|
|
::= { lcsPoeStatusTable 1 }
|
|
|
|
LCSPoeStatusEntry ::= SEQUENCE {
|
|
lcsPoeStatusLocalPort Integer32,
|
|
lcsPoeStatusPDclass DisplayString,
|
|
lcsPoeStatusPowerRequested DisplayString,
|
|
lcsPoeStatusPowerAllocated DisplayString,
|
|
lcsPoeStatusPowerUsed DisplayString,
|
|
lcsPoeStatusCurrentUsed DisplayString,
|
|
lcsPoeStatusPriority DisplayString,
|
|
lcsPoeStatusPortStatus DisplayString
|
|
}
|
|
|
|
lcsPoeStatusLocalPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Local port Index."
|
|
::= { lcsPoeStatusEntry 1 }
|
|
|
|
|
|
lcsPoeStatusPDclass OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Indicates the QCL user.
|
|
0: Max. power 15.4 W,
|
|
1: Max. power 4.0 W,
|
|
2: Max. power 7.0 W,
|
|
3: Max. power 15.4 W,
|
|
4: Max. power 30.0 W. "
|
|
::= { lcsPoeStatusEntry 2 }
|
|
|
|
lcsPoeStatusPowerRequested OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Power Requested shows the requested amount of power the PD wants to be reserved. "
|
|
::= { lcsPoeStatusEntry 3}
|
|
|
|
lcsPoeStatusPowerAllocated OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Power Allocated shows the amount of power the switch has allocated for the PD. "
|
|
::= { lcsPoeStatusEntry 4}
|
|
|
|
lcsPoeStatusPowerUsed OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Power Used shows how much power the PD currently is using. "
|
|
::= { lcsPoeStatusEntry 5}
|
|
|
|
lcsPoeStatusCurrentUsed OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Power Used shows how much current the PD currently is using. "
|
|
::= { lcsPoeStatusEntry 6}
|
|
|
|
lcsPoeStatusPriority OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Priority shows the port's priority configured by the user. "
|
|
::= { lcsPoeStatusEntry 7}
|
|
|
|
lcsPoeStatusPortStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Port Status shows the port's status. "
|
|
::= { lcsPoeStatusEntry 8}
|
|
|
|
lcsPoeStatusTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoeStatusTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure PoE Scheduling Total Table. "
|
|
::= { lcsPoeStatus 2 }
|
|
|
|
lcsPoeStatusTotalEntry OBJECT-TYPE
|
|
SYNTAX LCSPoeStatusTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoeStatusSwitchIndex }
|
|
::= { lcsPoeStatusTotalTable 1 }
|
|
|
|
LCSPoeStatusTotalEntry ::= SEQUENCE {
|
|
lcsPoeStatusSwitchIndex Integer32,
|
|
lcsPoeStatusTotalPowerRequested DisplayString,
|
|
lcsPoeStatusTotalPowerAllocated DisplayString,
|
|
lcsPoeStatusTotalPowerUsed DisplayString,
|
|
lcsPoeStatusTotalCurrentUsed DisplayString
|
|
}
|
|
|
|
lcsPoeStatusSwitchIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Index."
|
|
::= { lcsPoeStatusTotalEntry 1 }
|
|
|
|
lcsPoeStatusTotalPowerRequested OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Total Power Requested."
|
|
::= { lcsPoeStatusTotalEntry 2}
|
|
|
|
lcsPoeStatusTotalPowerAllocated OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Total Power allocated."
|
|
::= { lcsPoeStatusTotalEntry 3}
|
|
|
|
lcsPoeStatusTotalPowerUsed OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Total Power Used."
|
|
::= { lcsPoeStatusTotalEntry 4}
|
|
|
|
lcsPoeStatusTotalCurrentUsed OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Total Current Used."
|
|
::= { lcsPoeStatusTotalEntry 5}
|
|
|
|
|
|
lcsPoePowerDelay OBJECT IDENTIFIER ::= { lcsPoe 2 }
|
|
|
|
lcsPoePowerDelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoePowerDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure PoE Power Delay mode. "
|
|
::= { lcsPoePowerDelay 1 }
|
|
|
|
lcsPoePowerDelayEntry OBJECT-TYPE
|
|
SYNTAX LCSPoePowerDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoePowerDelayPort }
|
|
::= { lcsPoePowerDelayTable 1 }
|
|
|
|
LCSPoePowerDelayEntry ::= SEQUENCE {
|
|
lcsPoePowerDelayPort Integer32,
|
|
lcsPoePowerDelayMode Integer32,
|
|
lcsPoePowerDelayTime Integer32
|
|
}
|
|
|
|
lcsPoePowerDelayPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port, range : 1 - port number. "
|
|
::= { lcsPoePowerDelayEntry 1 }
|
|
|
|
lcsPoePowerDelayMode OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turn on / off the power delay function,
|
|
0: disable,
|
|
1: enable,
|
|
default: disable. "
|
|
::= { lcsPoePowerDelayEntry 2 }
|
|
|
|
lcsPoePowerDelayTime OBJECT-TYPE
|
|
SYNTAX Integer32(0..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set Delay Time,
|
|
default: 0,
|
|
range: 0-300 sec. "
|
|
::= { lcsPoePowerDelayEntry 3 }
|
|
|
|
lcsPoeAutoCheck OBJECT IDENTIFIER ::= { lcsPoe 3 }
|
|
|
|
lcsPoeAutoCheckPingCheck OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"connection between PoE port and power device.
|
|
0: disable,
|
|
1: enable,
|
|
default: disable. "
|
|
::= { lcsPoeAutoCheck 1 }
|
|
|
|
lcsPoeAutoCheckTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoeAutoCheckEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure PoE Auto check mode. "
|
|
::= { lcsPoeAutoCheck 2 }
|
|
|
|
lcsPoeAutoCheckEntry OBJECT-TYPE
|
|
SYNTAX LCSPoeAutoCheckEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoeAutoCheckPort }
|
|
::= { lcsPoeAutoCheckTable 1 }
|
|
|
|
LCSPoeAutoCheckEntry ::= SEQUENCE {
|
|
lcsPoeAutoCheckPort Integer32,
|
|
lcsPoeAutoCheckPingIPAddress DisplayString,
|
|
lcsPoeAutoCheckStartupTime Integer32,
|
|
lcsPoeAutoCheckIntervalTime Integer32,
|
|
lcsPoeAutoCheckRetryTime Integer32,
|
|
lcsPoeAutoCheckFailureLog DisplayString,
|
|
lcsPoeAutoCheckFailureAction INTEGER,
|
|
lcsPoeAutoCheckRebootTime Integer32,
|
|
lcsPoeAutoCheckMaxRebootTimes Integer32
|
|
}
|
|
|
|
lcsPoeAutoCheckPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port, range : 1 - port number. "
|
|
::= { lcsPoeAutoCheckEntry 1 }
|
|
|
|
lcsPoeAutoCheckPingIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address the system should ping.
|
|
default: 0.0.0.0 . "
|
|
::= { lcsPoeAutoCheckEntry 2 }
|
|
|
|
lcsPoeAutoCheckStartupTime OBJECT-TYPE
|
|
SYNTAX Integer32(30..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When PD has been start up, the Switch will wait Start up time to do PoE Auto Checking. default: 60, range: 30-600 sec. "
|
|
::= { lcsPoeAutoCheckEntry 3 }
|
|
|
|
lcsPoeAutoCheckIntervalTime OBJECT-TYPE
|
|
SYNTAX Integer32(10..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Device will send checking message to PD each interval time.
|
|
default: 30,
|
|
range: 10-120 sec. "
|
|
::= { lcsPoeAutoCheckEntry 4 }
|
|
|
|
lcsPoeAutoCheckRetryTime OBJECT-TYPE
|
|
SYNTAX Integer32(1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It will retry to send detection again.
|
|
default: 3,
|
|
range: 1-5. "
|
|
::= { lcsPoeAutoCheckEntry 5 }
|
|
|
|
lcsPoeAutoCheckFailureLog OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Failure loggings counter. "
|
|
::= { lcsPoeAutoCheckEntry 6 }
|
|
|
|
lcsPoeAutoCheckFailureAction OBJECT-TYPE
|
|
SYNTAX INTEGER { nothing(0), reboot(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It will retry to send detection again,
|
|
0: Nothing,
|
|
1: Reboot Remote PD,
|
|
default: Nothing. "
|
|
::= { lcsPoeAutoCheckEntry 7 }
|
|
|
|
lcsPoeAutoCheckRebootTime OBJECT-TYPE
|
|
SYNTAX Integer32(3..120)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When PD has been rebooted, the PoE port restored power after the specified time.
|
|
default: 15,
|
|
range: 3-120 sec. "
|
|
::= { lcsPoeAutoCheckEntry 8 }
|
|
|
|
lcsPoeAutoCheckMaxRebootTimes OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Failure Action is Reboot Remote PD, it limits times of Reboot.
|
|
default: 3,
|
|
range: 0-10. 0 means without reboot limits."
|
|
::= { lcsPoeAutoCheckEntry 10 }
|
|
|
|
lcsPoeScheduling OBJECT IDENTIFIER ::= { lcsPoe 4 }
|
|
|
|
lcsPoeSchedulingProfileNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the PoE Profile Number that want to configure. Range:1-16"
|
|
::= { lcsPoeScheduling 1 }
|
|
|
|
lcsPoeSchedulingPorofileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile Name. Maximum length:32."
|
|
::= { lcsPoeScheduling 2 }
|
|
|
|
lcsPoeSchedulingTimeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoeSchedulingTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show Poe Scheduling Time Config. "
|
|
::= { lcsPoeScheduling 3 }
|
|
|
|
lcsPoeSchedulingTimeEntry OBJECT-TYPE
|
|
SYNTAX LCSPoeSchedulingTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoeSchedulingTimeWeekIndex }
|
|
::= { lcsPoeSchedulingTimeTable 1 }
|
|
|
|
LCSPoeSchedulingTimeEntry ::= SEQUENCE {
|
|
lcsPoeSchedulingTimeWeekIndex Integer32,
|
|
lcsPoeSchedulingTimeStartTimeHourMinute DisplayString,
|
|
lcsPoeSchedulingTimeEndTimeHourMinute DisplayString
|
|
}
|
|
|
|
lcsPoeSchedulingTimeWeekIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Week Index.
|
|
1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun"
|
|
::= { lcsPoeSchedulingTimeEntry 1 }
|
|
|
|
lcsPoeSchedulingTimeStartTimeHourMinute OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PoE Scheduling Start Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55."
|
|
::= { lcsPoeSchedulingTimeEntry 2 }
|
|
|
|
lcsPoeSchedulingTimeEndTimeHourMinute OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PoE Scheduling End Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55."
|
|
::= { lcsPoeSchedulingTimeEntry 3 }
|
|
|
|
lcsPoeConfiguration OBJECT IDENTIFIER ::= { lcsPoe 5 }
|
|
|
|
lcsPoeConfigurationPowerManagementMode OBJECT-TYPE
|
|
SYNTAX Integer32(0..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power management mode for PoE port.
|
|
0: CLASS_RESERVED,
|
|
1: CLASS_CONSUMP,
|
|
2: ALLOCATED_RESERVED,
|
|
3: ALLOCATED_CONSUMP,
|
|
4: LLDPMED_RESERVED,
|
|
5: LLDPMED_CONSUMP,
|
|
default: CLASS_RESERVED. "
|
|
::= { lcsPoeConfiguration 1 }
|
|
|
|
lcsPoeConfigurationLegacyPDDetection OBJECT-TYPE
|
|
SYNTAX Integer32(0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The capacitor detection mode.
|
|
0: Disable
|
|
1: Enable
|
|
"
|
|
::= { lcsPoeConfiguration 2 }
|
|
|
|
lcsPoeConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoeConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure PoE Configuration mode. "
|
|
::= { lcsPoeConfiguration 4 }
|
|
|
|
lcsPoeConfigurationEntry OBJECT-TYPE
|
|
SYNTAX LCSPoeConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoeConfigurationSwitch }
|
|
::= { lcsPoeConfigurationTable 1 }
|
|
|
|
LCSPoeConfigurationEntry ::= SEQUENCE {
|
|
lcsPoeConfigurationSwitch Integer32,
|
|
lcsPoeConfigurationPoEFirmwareVersion DisplayString,
|
|
lcsPoeConfigurationPrimaryPowerSupply Integer32
|
|
}
|
|
|
|
lcsPoeConfigurationSwitch OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" switch index, range : 1 - 16. "
|
|
::= { lcsPoeConfigurationEntry 1 }
|
|
|
|
lcsPoeConfigurationPoEFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PoE Firmware Version."
|
|
::= { lcsPoeConfigurationEntry 2 }
|
|
|
|
lcsPoeConfigurationPrimaryPowerSupply OBJECT-TYPE
|
|
SYNTAX Integer32(0..2000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It must be defined what amount of power the primary and backup power sources
|
|
can deliver. "
|
|
::= { lcsPoeConfigurationEntry 3 }
|
|
|
|
lcsPoeConfigurationPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoeConfigurationPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure PoE Port Configuration mode. "
|
|
::= { lcsPoeConfiguration 5 }
|
|
|
|
lcsPoeConfigurationPortEntry OBJECT-TYPE
|
|
SYNTAX LCSPoeConfigurationPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoeConfigurationPort }
|
|
::= { lcsPoeConfigurationPortTable 1 }
|
|
|
|
LCSPoeConfigurationPortEntry ::= SEQUENCE {
|
|
lcsPoeConfigurationPort Integer32,
|
|
lcsPoeConfigurationPortPoEMode INTEGER,
|
|
lcsPoeConfigurationPortPriority INTEGER,
|
|
lcsPoeConfigurationPortMaximumPower DisplayString,
|
|
lcsPoeConfigurationPortDetection Integer32,
|
|
-- lcsPoeConfigurationPortPoEScheduleByProfileID Integer32,
|
|
lcsPoeConfigurationPortPoEScheduleByProfileName DisplayString,
|
|
lcsPoeConfigurationPortDelayMode Integer32,
|
|
lcsPoeConfigurationPortDelayTime Integer32
|
|
}
|
|
|
|
lcsPoeConfigurationPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port, range : 1 - port number. "
|
|
::= { lcsPoeConfigurationPortEntry 1 }
|
|
|
|
lcsPoeConfigurationPortPoEMode OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), poe(1), 4pair60W(2), 4pair90W(3), 8023bt(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PoE Mode represents the PoE operating mode for the port.
|
|
0: Disable,
|
|
1: Enable,
|
|
2: 4-Pair 60W,
|
|
3: 4-Pair 90W,
|
|
4: 802.3bt,
|
|
default: Enable. "
|
|
::= { lcsPoeConfigurationPortEntry 2 }
|
|
|
|
lcsPoeConfigurationPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER { low(0), high(1), critical(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical.
|
|
0: Low,
|
|
1: High,
|
|
2: Critical,
|
|
default: Low. "
|
|
::= { lcsPoeConfigurationPortEntry 3 }
|
|
|
|
lcsPoeConfigurationPortMaximumPower OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maximum Power value contains a numerical value that indicates the maximum
|
|
power in watts that can be delivered to a remote device.
|
|
max: 30[W]. "
|
|
::= { lcsPoeConfigurationPortEntry 4 }
|
|
|
|
lcsPoeConfigurationPortDetection OBJECT-TYPE
|
|
SYNTAX Integer32(1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Detection represents the PoE capacitor detection for the port.
|
|
-1:Not support.
|
|
1:Legacy : Legacy capacitive detection only.
|
|
2:4-point : IEEE 802.3af 4-point detection only.
|
|
3:4-point-legacy : IEEE 802.3af 4-point detection followed by Legacy detection.
|
|
4:2-point : IEEE 802.3af 2-point detection only.
|
|
5:2-point-legacy : IEEE 802.3af 2-point detection followed by Legacy detection.
|
|
"
|
|
::= { lcsPoeConfigurationPortEntry 5 }
|
|
|
|
-- lcsPoeConfigurationPortPoEScheduleByProfileID OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..16)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Specify a valid PoE schedule profile by profile id. 0:disable,1-16:1-16 profile."
|
|
-- ::= { lcsPoeConfigurationPortEntry 6 }
|
|
|
|
lcsPoeConfigurationPortPoEScheduleByProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify a valid PoE schedule profile by profile name. disabled: disable profile schedule."
|
|
::= { lcsPoeConfigurationPortEntry 7 }
|
|
|
|
lcsPoeConfigurationPortDelayMode OBJECT-TYPE
|
|
SYNTAX Integer32(0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turn on off the power delay function.
|
|
0: Disable
|
|
1: Enable"
|
|
::= { lcsPoeConfigurationPortEntry 8 }
|
|
|
|
lcsPoeConfigurationPortDelayTime OBJECT-TYPE
|
|
SYNTAX Integer32(0..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When rebooting, the PoE port will start to provide power to the PD when it out of delay time.
|
|
Range:0-300"
|
|
::= { lcsPoeConfigurationPortEntry 9 }
|
|
|
|
lcsPoeChipsetRebootSchedule OBJECT IDENTIFIER ::= { lcsPoe 6 }
|
|
|
|
lcsPoeChipsetRebootMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PoE Chipset Reboot Mode
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsPoeChipsetRebootSchedule 1 }
|
|
|
|
lcsPoeChipsetRebootTimeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPoeChipsetRebootTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure PoE Chipset Reboot Time."
|
|
::= { lcsPoeChipsetRebootSchedule 2 }
|
|
|
|
lcsPoeChipsetRebootTimeEntry OBJECT-TYPE
|
|
SYNTAX LCSPoeChipsetRebootTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPoeChipsetRebootWeekIndex }
|
|
::= { lcsPoeChipsetRebootTimeTable 1 }
|
|
|
|
LCSPoeChipsetRebootTimeEntry ::= SEQUENCE {
|
|
lcsPoeChipsetRebootWeekIndex Integer32,
|
|
lcsPoeChipsetRebootTimeHour Integer32,
|
|
lcsPoeChipsetRebootTimeMinute Integer32
|
|
}
|
|
|
|
lcsPoeChipsetRebootWeekIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PoE chipset reboot week index.
|
|
1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun"
|
|
::= { lcsPoeChipsetRebootTimeEntry 1 }
|
|
|
|
lcsPoeChipsetRebootTimeHour OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PoE Chipset Reboot Time (Hour). Range: 0-23.
|
|
-1:disable"
|
|
::= { lcsPoeChipsetRebootTimeEntry 2 }
|
|
|
|
lcsPoeChipsetRebootTimeMinute OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..55)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PoE Chipset Reboot Time (Minute). Range:0,5,10,...,55.
|
|
-1:disable"
|
|
::= { lcsPoeChipsetRebootTimeEntry 3 }
|
|
|
|
-- =======================================================================================================================
|
|
-- RowStatus Info: createAndWait, notReady, notInService not supported.
|
|
-- =======================================================================================================================
|
|
-- Textual Conventions for the lcs AAA Mib
|
|
-- =======================================================================================================================
|
|
--
|
|
lcsAAAMIB OBJECT IDENTIFIER ::= { lcsConfiguration 15 }
|
|
lcsAAA OBJECT IDENTIFIER ::= { lcsAAAMIB 1 }
|
|
lcsRADIUS OBJECT IDENTIFIER ::= { lcsAAA 1 }
|
|
lcsRADIUSGlobalConfig OBJECT IDENTIFIER ::= { lcsRADIUS 1 }
|
|
|
|
lcsTACACS OBJECT IDENTIFIER ::= { lcsAAA 2 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsRADIUS group
|
|
-- =======================================================================================================================
|
|
--lcsRADIUSGlobalConfig
|
|
|
|
lcsRADIUSGlobalConfigTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timeout is the number of seconds, to wait for a reply
|
|
from a RADIUS server before retransmitting the request.
|
|
range: 1-1000."
|
|
::= { lcsRADIUSGlobalConfig 1 }
|
|
|
|
lcsRADIUSGlobalConfigRetransmit OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Retransmit is the number of times,a RADIUS request is
|
|
retransmitted to a server that is not responding.If the
|
|
server has not responded after the last retransmit it is
|
|
considered to be dead.
|
|
range: 1-1000."
|
|
::= { lcsRADIUSGlobalConfig 2 }
|
|
|
|
lcsRADIUSGlobalConfigDeadtime OBJECT-TYPE
|
|
SYNTAX Integer32(0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will stop the switch from continually trying to
|
|
contact a server that it has already determined as dead.
|
|
range: 0-1440."
|
|
::= { lcsRADIUSGlobalConfig 3 }
|
|
|
|
lcsRADIUSGlobalConfigKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secret key shared between the RADIUS server and
|
|
the switch."
|
|
::= { lcsRADIUSGlobalConfig 4 }
|
|
|
|
lcsRADIUSGlobalConfigNASIPv4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 address to be used as attribute 4 in RADIUS
|
|
Access-Request packets."
|
|
::= { lcsRADIUSGlobalConfig 5 }
|
|
|
|
lcsRADIUSGlobalConfigNASIPv6 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address to be used as attribute 95 in RADIUS
|
|
Access-Request packets. "
|
|
::= { lcsRADIUSGlobalConfig 6 }
|
|
|
|
lcsRADIUSGlobalConfigNASIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier to be used as attribute 32 in RADIUS
|
|
Access-Request packets. "
|
|
::= { lcsRADIUSGlobalConfig 7 }
|
|
|
|
--lcsRADIUSServerConfigTable
|
|
|
|
lcsRADIUSServerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSRADIUSServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RADIUS Server Configuration Table."
|
|
::= { lcsRADIUS 2 }
|
|
|
|
lcsRADIUSServerConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSRADIUSServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RADIUS Server Configuration Entry."
|
|
INDEX { lcsRADIUSServerConfServerNo }
|
|
::= { lcsRADIUSServerConfigTable 1 }
|
|
|
|
LCSRADIUSServerConfigEntry ::= SEQUENCE {
|
|
lcsRADIUSServerConfServerNo Integer32,
|
|
lcsRADIUSServerConfHostname DisplayString,
|
|
lcsRADIUSServerConfAuthPort Integer32,
|
|
lcsRADIUSServerConfAcctPort Integer32,
|
|
lcsRADIUSServerConfTimeout Integer32,
|
|
lcsRADIUSServerConfRetransmit Integer32,
|
|
lcsRADIUSServerConfKey DisplayString,
|
|
lcsRADIUSServerConfRowStatus RowStatus
|
|
}
|
|
|
|
lcsRADIUSServerConfServerNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..5)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RADIUS server number.
|
|
max: 5."
|
|
::= { lcsRADIUSServerConfigEntry 1 }
|
|
|
|
lcsRADIUSServerConfHostname OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address or hostname of the RADIUS server. "
|
|
::= { lcsRADIUSServerConfigEntry 2 }
|
|
|
|
lcsRADIUSServerConfAuthPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port to use on the RADIUS server for
|
|
authentication.
|
|
range: 0-65535. "
|
|
::= { lcsRADIUSServerConfigEntry 3 }
|
|
|
|
lcsRADIUSServerConfAcctPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port to use on the RADIUS server for accounting.
|
|
range: 0-65535. "
|
|
::= { lcsRADIUSServerConfigEntry 4 }
|
|
|
|
lcsRADIUSServerConfTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This optional setting overrides the global timeout value.
|
|
Leaving it blank will use the global timeout value.
|
|
range: 1-1000. "
|
|
::= { lcsRADIUSServerConfigEntry 5 }
|
|
|
|
lcsRADIUSServerConfRetransmit OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This optional setting overrides the global retransmit value.
|
|
Leaving it blank will use the global retransmit value.
|
|
range: 1-1000. "
|
|
::= { lcsRADIUSServerConfigEntry 6 }
|
|
|
|
lcsRADIUSServerConfKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This optional setting overrides the global key. Leaving
|
|
it blank will use the global key."
|
|
::= { lcsRADIUSServerConfigEntry 7 }
|
|
|
|
lcsRADIUSServerConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create/delete entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsRADIUSServerConfigEntry 8 }
|
|
|
|
--lcsRADIUSDetailTable
|
|
|
|
lcsRADIUSDetailTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSRADIUSDetailEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RADIUS Detail Table."
|
|
::= { lcsRADIUS 3 }
|
|
|
|
lcsRADIUSDetailEntry OBJECT-TYPE
|
|
SYNTAX LCSRADIUSDetailEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RADIUS Detail Entry."
|
|
INDEX { lcsRADIUSServerConfServerNo }
|
|
::= { lcsRADIUSDetailTable 1 }
|
|
|
|
LCSRADIUSDetailEntry ::= SEQUENCE {
|
|
lcsRADIUSAuthIPAddress DisplayString,
|
|
lcsRADIUSAuthStatus DisplayString,
|
|
lcsRADIUSAuthRoundTripTime Integer32,
|
|
lcsRADIUSAuthRxAccessAccept Counter32,
|
|
lcsRADIUSAuthRxAccessReject Counter32,
|
|
lcsRADIUSAuthRxAccessChallenge Counter32,
|
|
lcsRADIUSAuthRxAccessResponse Counter32,
|
|
lcsRADIUSAuthRxBadAuth Counter32,
|
|
lcsRADIUSAuthRxUnknownType Counter32,
|
|
lcsRADIUSAuthRxPacketsDropped Counter32,
|
|
lcsRADIUSAuthTxAccessRequest Counter32,
|
|
lcsRADIUSAuthTxAccessRetransmission Counter32,
|
|
lcsRADIUSAuthTxPendingRequest Counter32,
|
|
lcsRADIUSAuthTxTimeout Counter32,
|
|
lcsRADIUSAccountIPAddress IpAddress,
|
|
lcsRADIUSAccountStatus DisplayString,
|
|
lcsRADIUSAccountRoundTripTime Integer32,
|
|
lcsRADIUSAccountRxResponses Counter32,
|
|
lcsRADIUSAccountRxMalformedResponse Counter32,
|
|
lcsRADIUSAccountRxBadAuth Counter32,
|
|
lcsRADIUSAccountRxUnknownType Counter32,
|
|
lcsRADIUSAccountRxPacketsDrop Counter32,
|
|
lcsRADIUSAccountTxRequest Counter32,
|
|
lcsRADIUSAccountTxRetransmission Counter32,
|
|
lcsRADIUSAccountTxPendingRequest Counter32,
|
|
lcsRADIUSAccountTxTimeout Counter32,
|
|
lcsRADIUSDetailClearCmd ActivateCmd
|
|
}
|
|
|
|
lcsRADIUSAuthIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address and UDP port for the authentication
|
|
server in question."
|
|
::= { lcsRADIUSDetailEntry 2 }
|
|
|
|
lcsRADIUSAuthStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the state of the server."
|
|
::= { lcsRADIUSDetailEntry 3 }
|
|
|
|
lcsRADIUSAuthRoundTripTime OBJECT-TYPE
|
|
SYNTAX Integer32(0..100000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval (measured in milliseconds) between
|
|
the most recent Access-Reply/Access-Challenge and the
|
|
Access-Request that matched it from the RADIUS
|
|
authentication server."
|
|
::= { lcsRADIUSDetailEntry 4 }
|
|
|
|
lcsRADIUSAuthRxAccessAccept OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Accept packets
|
|
(valid or invalid) received from the server."
|
|
::= { lcsRADIUSDetailEntry 5 }
|
|
|
|
lcsRADIUSAuthRxAccessReject OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Reject packets
|
|
(valid or invalid) received from the server."
|
|
::= { lcsRADIUSDetailEntry 6 }
|
|
|
|
lcsRADIUSAuthRxAccessChallenge OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Challenge packets
|
|
(valid or invalid) received from the server."
|
|
::= { lcsRADIUSDetailEntry 7 }
|
|
|
|
lcsRADIUSAuthRxAccessResponse OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of malformed RADIUS Access-Response
|
|
packets received from the server."
|
|
::= { lcsRADIUSDetailEntry 8 }
|
|
|
|
lcsRADIUSAuthRxBadAuth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Response packets containing
|
|
invalid authenticators or Message Authenticator
|
|
attributes received from the server."
|
|
::= { lcsRADIUSDetailEntry 9 }
|
|
|
|
lcsRADIUSAuthRxUnknownType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets that were received with
|
|
unknown types from the server on the authentication
|
|
port and dropped."
|
|
::= { lcsRADIUSDetailEntry 10 }
|
|
|
|
lcsRADIUSAuthRxPacketsDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets that were received from
|
|
the server on the authentication port and dropped for
|
|
some other reason."
|
|
::= { lcsRADIUSDetailEntry 11 }
|
|
|
|
lcsRADIUSAuthTxAccessRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Request packets sent to
|
|
the server. This does not include retransmissions."
|
|
::= { lcsRADIUSDetailEntry 12 }
|
|
|
|
lcsRADIUSAuthTxAccessRetransmission OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Request packets
|
|
retransmitted to the RADIUS authentication server."
|
|
::= { lcsRADIUSDetailEntry 13 }
|
|
|
|
lcsRADIUSAuthTxPendingRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS Access-Request packets destined
|
|
for the server that have not yet timed out or received
|
|
a response. "
|
|
::= { lcsRADIUSDetailEntry 14 }
|
|
|
|
lcsRADIUSAuthTxTimeout OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication timeouts to the server.
|
|
After a timeout, the client may retry to the same server,
|
|
send to a different server, or give up."
|
|
::= { lcsRADIUSDetailEntry 15 }
|
|
|
|
lcsRADIUSAccountIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address and UDP port for the authentication server
|
|
in question."
|
|
::= { lcsRADIUSDetailEntry 16 }
|
|
|
|
lcsRADIUSAccountStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the state of the server. "
|
|
::= { lcsRADIUSDetailEntry 17 }
|
|
|
|
lcsRADIUSAccountRoundTripTime OBJECT-TYPE
|
|
SYNTAX Integer32(0..100000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval (measured in milliseconds) between
|
|
the most recent Access-Reply/Access-Challenge and the
|
|
Access-Request that matched it from the RADIUS
|
|
authentication server."
|
|
::= { lcsRADIUSDetailEntry 18 }
|
|
|
|
lcsRADIUSAccountRxResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets (valid or invalid)
|
|
received from the server."
|
|
::= { lcsRADIUSDetailEntry 19 }
|
|
|
|
lcsRADIUSAccountRxMalformedResponse OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of malformed RADIUS packets received from
|
|
the server. "
|
|
::= { lcsRADIUSDetailEntry 20 }
|
|
|
|
lcsRADIUSAccountRxBadAuth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets containing invalid
|
|
authenticators received from the server."
|
|
::= { lcsRADIUSDetailEntry 21 }
|
|
|
|
lcsRADIUSAccountRxUnknownType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets of unknown types that were
|
|
received from the server on the accounting port. "
|
|
::= { lcsRADIUSDetailEntry 22 }
|
|
|
|
lcsRADIUSAccountRxPacketsDrop OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets that were received from
|
|
the server on the accounting port and dropped for some
|
|
other reason."
|
|
::= { lcsRADIUSDetailEntry 23 }
|
|
|
|
lcsRADIUSAccountTxRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets sent to the server.
|
|
This does not include retransmissions."
|
|
::= { lcsRADIUSDetailEntry 24 }
|
|
|
|
lcsRADIUSAccountTxRetransmission OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets retransmitted to the RADIUS
|
|
accounting server."
|
|
::= { lcsRADIUSDetailEntry 25 }
|
|
|
|
lcsRADIUSAccountTxPendingRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RADIUS packets destined for the server
|
|
that have not yet timed out or received a response."
|
|
::= { lcsRADIUSDetailEntry 26 }
|
|
|
|
lcsRADIUSAccountTxTimeout OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of accounting timeouts to the server.
|
|
After a timeout, the client may retry to the same
|
|
server, send to a different server, or give up."
|
|
::= { lcsRADIUSDetailEntry 27 }
|
|
|
|
lcsRADIUSDetailClearCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears the counters for the selected server."
|
|
::= { lcsRADIUSDetailEntry 28 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsTACACS group
|
|
-- =======================================================================================================================
|
|
--lcsTACACSGlobalConfig
|
|
|
|
lcsTACACSGlobalConfigTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timeout is the number of seconds,to wait for a reply
|
|
from a TACACS+ server before it is considered to be dead.
|
|
range: 1-1000 seconds,
|
|
default: 5 seconds."
|
|
::= { lcsTACACS 1 }
|
|
|
|
lcsTACACSGlobalConfigDeadtime OBJECT-TYPE
|
|
SYNTAX Integer32(0..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period during which the switch will not send new
|
|
requests to a server that has failed to respond to a
|
|
previous request. This will stop the switch from
|
|
continually trying to contact a server that it has
|
|
already determined as dead.
|
|
range: 0-1440 minutes,
|
|
default: 0 minutes."
|
|
::= { lcsTACACS 2 }
|
|
|
|
lcsTACACSGlobalConfigKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The secret key shared between the TACACS+ server and
|
|
the switch."
|
|
::= { lcsTACACS 3 }
|
|
|
|
--lcsTACACSServerConfigTable
|
|
|
|
lcsTACACSServerConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSTACACSServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TACACS Server configuration Table."
|
|
::= { lcsTACACS 4 }
|
|
|
|
lcsTACACSServerConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSTACACSServerConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TACACS Server configuration Entry."
|
|
INDEX { lcsTACACSServerConfigServerNo }
|
|
::= { lcsTACACSServerConfigTable 1 }
|
|
|
|
LCSTACACSServerConfigEntry ::= SEQUENCE {
|
|
lcsTACACSServerConfigServerNo Integer32,
|
|
lcsTACACSServerConfigHostname DisplayString,
|
|
lcsTACACSServerConfigPort Integer32,
|
|
lcsTACACSServerConfigTimeout Integer32,
|
|
lcsTACACSServerConfigKey DisplayString,
|
|
lcsTACACSServerConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsTACACSServerConfigServerNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..5)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TACACS server number.
|
|
max: 5."
|
|
::= { lcsTACACSServerConfigEntry 1 }
|
|
|
|
lcsTACACSServerConfigHostname OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address or hostname of the TACACS+ server."
|
|
::= { lcsTACACSServerConfigEntry 2 }
|
|
|
|
lcsTACACSServerConfigPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP port to use on the TACACS+ server for
|
|
authentication."
|
|
::= { lcsTACACSServerConfigEntry 3 }
|
|
|
|
lcsTACACSServerConfigTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(1..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This optional setting overrides the global timeout
|
|
value. Leaving it blank will use the global timeout
|
|
value.
|
|
range: 1-1000."
|
|
::= { lcsTACACSServerConfigEntry 4 }
|
|
|
|
lcsTACACSServerConfigKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This optional setting overrides the global key.
|
|
Leaving it blank will use the global key. "
|
|
::= { lcsTACACSServerConfigEntry 5 }
|
|
|
|
lcsTACACSServerConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create/delete entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsTACACSServerConfigEntry 6 }
|
|
|
|
-- =======================================================================================================================
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Textual Conventions for the lcs Nas Mib
|
|
-- =======================================================================================================================
|
|
--
|
|
lcsNasMIB OBJECT IDENTIFIER ::= { lcsConfiguration 16 }
|
|
lcsNAS OBJECT IDENTIFIER ::= { lcsNasMIB 1 }
|
|
lcsNASConf OBJECT IDENTIFIER ::= { lcsNAS 1 }
|
|
lcsNASStatus OBJECT IDENTIFIER ::= { lcsNAS 2 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsNAS group
|
|
-- =======================================================================================================================
|
|
--lcsNASConf
|
|
|
|
lcsNASConfMode OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if NAS is globally enabled or disabled on
|
|
the switch."
|
|
DEFVAL { disable }
|
|
::= { lcsNASConf 1 }
|
|
|
|
lcsNASConfReauthenticationEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enable, successfully authenticated supplicants/clients
|
|
are reauthenticated after the interval specified by the
|
|
Reauthentication Period."
|
|
DEFVAL { disable }
|
|
::= { lcsNASConf 2 }
|
|
|
|
lcsNASConfReauthenticationPeriod OBJECT-TYPE
|
|
SYNTAX Integer32(1..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines the period, in seconds, after which a
|
|
connected client must be reauthenticated.
|
|
default: 3600 sec,
|
|
range: 1-3600 sec."
|
|
::= { lcsNASConf 3 }
|
|
|
|
lcsNASConfEAPOLTimeout OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines the time for retransmission of Request
|
|
Identity EAPOL frames.
|
|
default: 30 sec,
|
|
range: 1-65535 sec."
|
|
::= { lcsNASConf 4 }
|
|
|
|
lcsNASConfAgingPeriod OBJECT-TYPE
|
|
SYNTAX Integer32(0|10..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the NAS module uses the Port Security module to
|
|
secure MAC addresses, the Port Security module needs to
|
|
check for activity on the MAC address in question at regular
|
|
intervals and free resources if no activity is seen within
|
|
a given period of time.
|
|
default: 300 sec,
|
|
0: no support.
|
|
range: 0,10-1000000 sec."
|
|
::= { lcsNASConf 5 }
|
|
|
|
lcsNASConfHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32(0|10..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If a client is denied access - either because the RADIUS
|
|
server denies the client access or because the RADIUS server
|
|
request times out - the client is put on hold in the
|
|
Unauthorized state.
|
|
default: 10 sec,
|
|
0: no support.
|
|
range: 0,10-1000000 sec."
|
|
::= { lcsNASConf 6 }
|
|
|
|
lcsNASConfRADIUSQoSEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RADIUS-assigned QoS provides a means to centrally control
|
|
the traffic class to which traffic coming from a successfully
|
|
authenticated supplicant is assigned on the switch."
|
|
DEFVAL { disable }
|
|
::= { lcsNASConf 7 }
|
|
|
|
lcsNASConfRADIUSVLANEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RADIUS-assigned VLAN provides a means to centrally control
|
|
the VLAN on which a successfully authenticated supplicant
|
|
is placed on the switch."
|
|
DEFVAL { disable }
|
|
::= { lcsNASConf 8 }
|
|
|
|
lcsNASConfGuestVLANEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Guest VLAN is a special VLAN - typically with limited
|
|
network access - on which 802.1X-unaware clients are placed
|
|
after a network administrator-defined timeout."
|
|
DEFVAL { disable }
|
|
::= { lcsNASConf 9 }
|
|
|
|
lcsNASConfGuestVLANID OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the value that a port's Port VLAN ID is set to if
|
|
a port is moved into the Guest VLAN.
|
|
default: 1,
|
|
range: 1-4094."
|
|
::= { lcsNASConf 10 }
|
|
|
|
lcsNASConfMaxReauthCount OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the switch transmits an EAPOL Request
|
|
Identity frame without response before considering entering
|
|
the Guest VLAN is adjusted with this setting.
|
|
default: 2,
|
|
range: 1-255."
|
|
::= { lcsNASConf 11 }
|
|
|
|
lcsNASConfAllowGuestVLAN OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch remembers if an EAPOL frame has been received
|
|
on the port for the life-time of the port."
|
|
DEFVAL { disable }
|
|
::= { lcsNASConf 12 }
|
|
|
|
lcsNASConfMacBasedUseEAP OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch can do the RADIUS authentication on behalf of the client in the
|
|
MAC-based Auth. port authentication mode. It can either present itself as a
|
|
normal 802.1X client to the RADIUS Server and use EAP, supporting only the
|
|
MD5-Challenge, or alternativly can use plain RADIUS with username / passwort
|
|
authentification without EAP if this setting is disabled."
|
|
::= { lcsNASConf 101 }
|
|
|
|
--lcsNASPortConfTable
|
|
|
|
lcsNASPortConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSNASPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NAS Port Configuration Table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsNASConf 13 }
|
|
|
|
lcsNASPortConfEntry OBJECT-TYPE
|
|
SYNTAX LCSNASPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NAS Port Configuration Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsNASPortConfTable 1 }
|
|
|
|
LCSNASPortConfEntry ::= SEQUENCE {
|
|
lcsNASPortConfAdminState Integer32,
|
|
lcsNASPortConfRADIUSQoSEnabled AdminMode,
|
|
lcsNASPortConfRADIUSVLANEnabled AdminMode,
|
|
lcsNASPortConfGuestVLANEnabled AdminMode,
|
|
lcsNASPortConfFallbackEnabled AdminMode,
|
|
lcsNASPortConfPortState DisplayString,
|
|
lcsNASPortConfReauthenticateCmd INTEGER,
|
|
lcsNASPortConfReinitializeCmd INTEGER
|
|
}
|
|
|
|
lcsNASPortConfAdminState OBJECT-TYPE
|
|
SYNTAX Integer32(0..6)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This selection controls the port's authentication mode.
|
|
0: Force Authorized,
|
|
1: Force Unauthorized,
|
|
2: Port-based 802.1X,
|
|
3: Single 802.1X,
|
|
4: Multi 802.1X,
|
|
5: MAC-based Auth,
|
|
6: MAC-based Single Auth.
|
|
range: 0-6."
|
|
::= { lcsNASPortConfEntry 2 }
|
|
|
|
lcsNASPortConfRADIUSQoSEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When RADIUS-Assigned QoS is both globally enabled and
|
|
enabled on a given port, the switch reacts to QoS Class
|
|
information carried in the RADIUS Access-Accept packet
|
|
transmitted by the RADIUS server when a supplicant is
|
|
successfully authenticated."
|
|
::= { lcsNASPortConfEntry 3 }
|
|
|
|
lcsNASPortConfRADIUSVLANEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When RADIUS-Assigned VLAN is both globally enabled and
|
|
enabled for a given port, the switch reacts to VLAN ID
|
|
information carried in the RADIUS Access-Accept packet
|
|
transmitted by the RADIUS server when a supplicant is
|
|
successfully authenticated."
|
|
::= { lcsNASPortConfEntry 4 }
|
|
|
|
lcsNASPortConfGuestVLANEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Guest VLAN is both globally enabled and enabled for
|
|
a given port, the switch considers moving the port into
|
|
the Guest VLAN according to the rules."
|
|
::= { lcsNASPortConfEntry 5 }
|
|
|
|
lcsNASPortConfPortState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the port."
|
|
::= { lcsNASPortConfEntry 6 }
|
|
|
|
lcsNASPortConfReauthenticateCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Schedules a reauthentication whenever the quiet-period of
|
|
the port runs out (EAPOL-based authentication). For
|
|
MAC-based authentication, reauthentication will be attempted
|
|
immediately.The button only has effect for successfully
|
|
authenticated clients on the port and will not cause the
|
|
clients to get temporarily unauthorized."
|
|
DEFVAL { noAction }
|
|
::= { lcsNASPortConfEntry 7 }
|
|
|
|
lcsNASPortConfReinitializeCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces a reinitialization of the clients on the port and
|
|
thereby a reauthentication immediately. The clients will
|
|
transfer to the unauthorized state while the
|
|
reauthentication is in progress."
|
|
DEFVAL { noAction }
|
|
::= { lcsNASPortConfEntry 8 }
|
|
|
|
lcsNASPortConfFallbackEnabled OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When Fallback is enabled, the switch will take over the supplicants role
|
|
after max reauthentication count is reached and tries to authenticate the
|
|
client on its behalf as described for MAC-based Auth.
|
|
Admin State supported : Single and Multi 802.1X."
|
|
::= { lcsNASPortConfEntry 101 }
|
|
|
|
--lcsNASSwitchStatusTable
|
|
|
|
lcsNASSwitchStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSNASSwitchStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NAS Switch Status Table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsNASStatus 1 }
|
|
|
|
lcsNASSwitchStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSNASSwitchStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NAS Switch Status Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsNASSwitchStatusTable 1 }
|
|
|
|
LCSNASSwitchStatusEntry ::= SEQUENCE {
|
|
lcsNASSwitchStatusAdminState DisplayString,
|
|
lcsNASSwitchStatusPortState DisplayString,
|
|
lcsNASSwitchStatusLastSource DisplayString,
|
|
lcsNASSwitchStatusLastID DisplayString,
|
|
lcsNASSwitchStatusQoSClass DisplayString,
|
|
lcsNASSwitchStatusPortVLANID DisplayString
|
|
}
|
|
|
|
lcsNASSwitchStatusAdminState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's current administrative state."
|
|
::= { lcsNASSwitchStatusEntry 2 }
|
|
|
|
lcsNASSwitchStatusPortState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the port."
|
|
::= { lcsNASSwitchStatusEntry 3 }
|
|
|
|
lcsNASSwitchStatusLastSource OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source MAC address carried in the most recently
|
|
received EAPOL frame for EAPOL-based authentication,
|
|
and the most recently received frame from a new client
|
|
for MAC-based authentication."
|
|
::= { lcsNASSwitchStatusEntry 4 }
|
|
|
|
lcsNASSwitchStatusLastID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name (supplicant identity) carried in the most
|
|
recently received Response Identity EAPOL frame for
|
|
EAPOL-based authentication, and the source MAC address
|
|
from the most recently received frame from a new client
|
|
for MAC-based authentication."
|
|
::= { lcsNASSwitchStatusEntry 5 }
|
|
|
|
lcsNASSwitchStatusQoSClass OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Class assigned to the port by the RADIUS server
|
|
if enabled."
|
|
::= { lcsNASSwitchStatusEntry 6 }
|
|
|
|
lcsNASSwitchStatusPortVLANID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID that NAS has put the port in."
|
|
::= { lcsNASSwitchStatusEntry 7 }
|
|
|
|
--lcsNASPortCounterTable
|
|
|
|
lcsNASPortCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSNASPortCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NAS Port Counter Table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsNASStatus 2 }
|
|
|
|
lcsNASPortCounterEntry OBJECT-TYPE
|
|
SYNTAX LCSNASPortCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NAS Port Counter Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsNASPortCounterTable 1 }
|
|
|
|
LCSNASPortCounterEntry ::= SEQUENCE {
|
|
lcsNASReceiveEAPOLTotal Integer32,
|
|
lcsNASReceiveEAPOLResponseID Integer32,
|
|
lcsNASReceiveEAPOLResponses Integer32,
|
|
lcsNASReceiveEAPOLStart Integer32,
|
|
lcsNASReceiveEAPOLLogoff Integer32,
|
|
lcsNASReceiveEAPOLInvalidType Integer32,
|
|
lcsNASReceiveEAPOLInvalidLength Integer32,
|
|
lcsNASTransmitEAPOLTotal Integer32,
|
|
lcsNASTransmitEAPOLRequestID Integer32,
|
|
lcsNASTransmitEAPOLRequests Integer32,
|
|
lcsNASPortReceiveBackendServerAccessChallenges Integer32,
|
|
lcsNASPortReceiveBackendServerOtherRequests Integer32,
|
|
lcsNASPortReceiveBackendServerAuthSuccesses Integer32,
|
|
lcsNASPortReceiveBackendServerAuthFailures Integer32,
|
|
lcsNASPortTransmitBackendServerResponses Integer32,
|
|
lcsNASSupplicantInfoMAC DisplayString,
|
|
lcsNASSupplicantInfoVlanID Integer32,
|
|
lcsNASSupplicantInfoVersion Integer32,
|
|
lcsNASSupplicantInfoIdentity DisplayString,
|
|
lcsNASPortCounterClearCmd ActivateCmd
|
|
}
|
|
|
|
lcsNASReceiveEAPOLTotal OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid EAPOL frames of any type that have
|
|
been received by the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 2 }
|
|
|
|
lcsNASReceiveEAPOLResponseID OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid EAPOL Response Identity frames that
|
|
have been received by the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 3 }
|
|
|
|
lcsNASReceiveEAPOLResponses OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid EAPOL response frames (other than
|
|
Response Identity frames) that have been received by
|
|
the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 4 }
|
|
|
|
lcsNASReceiveEAPOLStart OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of EAPOL Start frames that have been received
|
|
by the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 5 }
|
|
|
|
lcsNASReceiveEAPOLLogoff OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid EAPOL Logoff frames that have been
|
|
received by the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 6 }
|
|
|
|
lcsNASReceiveEAPOLInvalidType OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of EAPOL frames that have been received by
|
|
the switch in which the frame type is not recognized.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 7 }
|
|
|
|
lcsNASReceiveEAPOLInvalidLength OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of EAPOL frames that have been received
|
|
by the switch in which the Packet Body Length field
|
|
is invalid.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 8 }
|
|
|
|
lcsNASTransmitEAPOLTotal OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of EAPOL frames of any type that have been
|
|
transmitted by the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 9 }
|
|
|
|
lcsNASTransmitEAPOLRequestID OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of EAPOL Request Identity frames that have
|
|
been transmitted by the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 10 }
|
|
|
|
lcsNASTransmitEAPOLRequests OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid EAPOL Request frames (other than
|
|
Request Identity frames) that have been transmitted
|
|
by the switch.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 11 }
|
|
|
|
lcsNASPortReceiveBackendServerAccessChallenges OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1X-based: Counts the number of times that the switch
|
|
receives the first request from the backend server following
|
|
the first response from the supplicant. Indicates that the
|
|
backend server has communication with the switch.
|
|
MAC-based:Counts all Access Challenges received from the
|
|
backend server for this port (left-most table).
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 12 }
|
|
|
|
lcsNASPortReceiveBackendServerOtherRequests OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1X-based: Counts the number of times that the switch
|
|
sends an EAP Request packet following the first to the
|
|
supplicant. Indicates that the backend server chose an
|
|
EAP-method.
|
|
MAC-based: Not applicable.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 13 }
|
|
|
|
lcsNASPortReceiveBackendServerAuthSuccesses OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1X- and MAC-based: Counts the number of times that
|
|
the switch receives a success indication.Indicates that
|
|
the supplicant has successfully authenticated to
|
|
the backend server.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 14 }
|
|
|
|
lcsNASPortReceiveBackendServerAuthFailures OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1X- and MAC-based:Counts the number of times that the
|
|
switch receives a failure message.This indicates that the
|
|
supplicant has not authenticated to the backend
|
|
server.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 15 }
|
|
|
|
lcsNASPortTransmitBackendServerResponses OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1X-based:Counts the number of times that the switch
|
|
attempts to send a supplicant's first response packet to
|
|
the backend server. Indicates the switch attempted
|
|
communication with the backend server. Possible
|
|
retransmissions are not counted.
|
|
MAC-based: Counts all the backend server packets sent from
|
|
the switch towards the backend server for a given port
|
|
(left-most table). Possible retransmissions are not
|
|
counted.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 16 }
|
|
|
|
lcsNASSupplicantInfoMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the last supplicant. "
|
|
::= { lcsNASPortCounterEntry 17 }
|
|
|
|
lcsNASSupplicantInfoVlanID OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID on which the last frame from the last
|
|
supplicant was received.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 18 }
|
|
|
|
lcsNASSupplicantInfoVersion OBJECT-TYPE
|
|
SYNTAX Integer32(-1..1000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1X-based:The protocol version number carried in
|
|
the most recently received EAPOL frame.
|
|
MAC-based: Not applicable.
|
|
-1: no support."
|
|
::= { lcsNASPortCounterEntry 19 }
|
|
|
|
lcsNASSupplicantInfoIdentity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1X-based:The user name (supplicant identity) carried
|
|
in the most recently received Response Identity EAPOL frame.
|
|
MAC-based: Not applicable. "
|
|
::= { lcsNASPortCounterEntry 20 }
|
|
|
|
lcsNASPortCounterClearCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear the counters for the selected port."
|
|
::= { lcsNASPortCounterEntry 21 }
|
|
|
|
|
|
-- =======================================================================================================================
|
|
lcsMACConf OBJECT IDENTIFIER ::= { lcsConfiguration 17 }
|
|
|
|
lcsMAC OBJECT IDENTIFIER ::= { lcsMACConf 1 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsMAC group
|
|
-- =======================================================================================================================
|
|
lcsMACDisableAutomaticAging OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disable the automatic aging of dynamic entries."
|
|
::= { lcsMAC 1 }
|
|
|
|
lcsMACAgingTime OBJECT-TYPE
|
|
SYNTAX Integer32 (-1 | 10..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure aging time by entering a value here in seconds.
|
|
range: 10-1000000 seconds.
|
|
-1: Automatic Aging is disable."
|
|
::= { lcsMAC 2 }
|
|
|
|
--lcsMACLearningTable
|
|
lcsMACLearningTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMACLearningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mac learning table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsMAC 3 }
|
|
|
|
lcsMACLearningEntry OBJECT-TYPE
|
|
SYNTAX LCSMACLearningEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mac learning entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsMACLearningTable 1 }
|
|
|
|
LCSMACLearningEntry ::= SEQUENCE {
|
|
lcsMACTableLearning INTEGER
|
|
}
|
|
|
|
lcsMACTableLearning OBJECT-TYPE
|
|
SYNTAX INTEGER{ auto(0), disable(1), secure(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"auto(0) : Learning is done automatically as soon as a
|
|
frame with unknown SMAC is received.
|
|
disable(1): Disable, No learning is done.
|
|
secure(2) : Secure, Only static MAC entries are learned,
|
|
all other frames are dropped."
|
|
::= { lcsMACLearningEntry 2 }
|
|
|
|
lcsLearningDisabledVLANs OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Learning Disabled VLANs"
|
|
::= { lcsMAC 4 }
|
|
|
|
--lcsMACStaticConfigTable
|
|
lcsMACStaticConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMACStaticConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static Mac config table."
|
|
::= { lcsMAC 5 }
|
|
|
|
lcsMACStaticConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSMACStaticConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static Mac config entry."
|
|
INDEX { lcsMACStaticConfigIndex }
|
|
::= { lcsMACStaticConfigTable 1 }
|
|
|
|
LCSMACStaticConfigEntry ::= SEQUENCE {
|
|
lcsMACStaticConfigSwitchIndex Integer32,
|
|
lcsMACStaticConfigIndex Integer32,
|
|
lcsMACStaticConfigVID Integer32,
|
|
lcsMACStaticConfigMACaddress DisplayString,
|
|
lcsMACStaticConfigPortList DisplayString,
|
|
lcsMACStaticConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsMACStaticConfigSwitchIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Index."
|
|
::= { lcsMACStaticConfigEntry 1 }
|
|
|
|
|
|
|
|
lcsMACStaticConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..64)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The static entries in the MAC table are shown in this table.
|
|
The static MAC table can contain 64 entries."
|
|
::= { lcsMACStaticConfigEntry 2 }
|
|
|
|
lcsMACStaticConfigVID OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the entry.
|
|
range: 1-4094."
|
|
::= { lcsMACStaticConfigEntry 3 }
|
|
|
|
lcsMACStaticConfigMACaddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the entry."
|
|
::= { lcsMACStaticConfigEntry 4 }
|
|
|
|
lcsMACStaticConfigPortList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Checkmarks indicate which ports are members of the entry.
|
|
Check or uncheck as needed to
|
|
modify the entry."
|
|
::= { lcsMACStaticConfigEntry 5 }
|
|
|
|
lcsMACStaticConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry,
|
|
and is used to create/delete entries. Any
|
|
object in an entry of this table may be modified
|
|
while the value of the corresponding instance
|
|
of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsMACStaticConfigEntry 6 }
|
|
|
|
|
|
-- =======================================================================================================================
|
|
lcsSpanningTree OBJECT IDENTIFIER ::= { lcsConfiguration 18 }
|
|
|
|
lcsBridgeSettings OBJECT IDENTIFIER ::= { lcsSpanningTree 1 }
|
|
|
|
lcsSTPProtocolVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:STP
|
|
2:RSTP
|
|
3:MSTP"
|
|
::= { lcsBridgeSettings 1 }
|
|
|
|
lcsBridgePriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Priority, range: 0-61440, multiple of 4096."
|
|
::= { lcsBridgeSettings 2 }
|
|
|
|
lcsBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Forward Delay, range: 4-30 seconds."
|
|
::= { lcsBridgeSettings 3 }
|
|
|
|
lcsBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge MaxAge, range:6-40 seconds."
|
|
::= { lcsBridgeSettings 4 }
|
|
|
|
lcsBridgeMaxHops OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Max Hops, range:6-40 hops."
|
|
::= { lcsBridgeSettings 5 }
|
|
|
|
lcsBridgetxHoldCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Transmit Hold Count,range: 1-10 bpdu's per second. "
|
|
::= { lcsBridgeSettings 6 }
|
|
|
|
lcsBridgeBPDUFilter OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge BPD UFilter
|
|
0:disable
|
|
1:enable "
|
|
::= { lcsBridgeSettings 7 }
|
|
|
|
lcsBridgeBPDUGuard OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge BPDU Guard
|
|
0:disable
|
|
1:enable "
|
|
::= { lcsBridgeSettings 8 }
|
|
|
|
lcsBridgeerrorRecoveryDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge error Recovery Delay
|
|
range:30-86400 seconds
|
|
0:disable
|
|
"
|
|
::= { lcsBridgeSettings 9 }
|
|
|
|
lcsBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval between sending STP BPDU's. Valid values are in the range 1 to 10 seconds,
|
|
default:2 seconds."
|
|
::= { lcsBridgeSettings 10 }
|
|
|
|
lcsMSTIMapping OBJECT IDENTIFIER ::= { lcsSpanningTree 2 }
|
|
lcsConfigName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration Name, identify the VLAN to MSTI mapping"
|
|
::= { lcsMSTIMapping 1 }
|
|
|
|
lcsConfigRevision OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration Revision. range:0-65535 "
|
|
::= { lcsMSTIMapping 2 }
|
|
|
|
lcsMSTIMappingVLAN OBJECT IDENTIFIER ::= { lcsSpanningTree 3 }
|
|
lcsConfigMstiName1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of VLANs mapped to the MSTI1.
|
|
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. "
|
|
::= { lcsMSTIMappingVLAN 1 }
|
|
|
|
lcsConfigMstiName2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of VLANs mapped to the MSTI2.
|
|
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. "
|
|
::= { lcsMSTIMappingVLAN 2 }
|
|
|
|
lcsConfigMstiName3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of VLANs mapped to the MSTI3.
|
|
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. "
|
|
::= { lcsMSTIMappingVLAN 3 }
|
|
|
|
lcsConfigMstiName4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of VLANs mapped to the MSTI4.
|
|
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. "
|
|
::= { lcsMSTIMappingVLAN 4 }
|
|
|
|
lcsConfigMstiName5 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of VLANs mapped to the MSTI5.
|
|
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. "
|
|
::= { lcsMSTIMappingVLAN 5 }
|
|
|
|
lcsConfigMstiName6 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of VLANs mapped to the MSTI6.
|
|
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. "
|
|
::= { lcsMSTIMappingVLAN 6 }
|
|
|
|
lcsConfigMstiName7 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of VLANs mapped to the MSTI7.
|
|
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. "
|
|
::= { lcsMSTIMappingVLAN 7 }
|
|
|
|
lcsMSTIPriorities OBJECT IDENTIFIER ::= { lcsSpanningTree 4 }
|
|
|
|
lcsCSTIPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CSTI Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 1 }
|
|
|
|
lcsMSTI1Priority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTI1 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 2 }
|
|
|
|
lcsMSTI2Priority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTI2 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 3 }
|
|
|
|
lcsMSTI3Priority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTI3 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 4 }
|
|
lcsMSTI4Priority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTI4 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 5 }
|
|
lcsMSTI5Priority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTI5 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 6 }
|
|
|
|
lcsMSTI6Priority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTI6 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 7 }
|
|
lcsMSTI7Priority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSTI7 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority."
|
|
::= { lcsMSTIPriorities 8 }
|
|
|
|
|
|
lcsCISTPorts OBJECT IDENTIFIER ::= { lcsSpanningTree 5 }
|
|
|
|
lcsCISTAggregatedEnable OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Enable. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPorts 1 }
|
|
|
|
lcsCISTAggregatedPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Path Cost. range: 0-200000000. 0 is Auto."
|
|
::= { lcsCISTPorts 2 }
|
|
|
|
lcsCISTAggregatedPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Priority. range: 0-240, multiple of 16."
|
|
::= { lcsCISTPorts 3 }
|
|
|
|
lcsCISTAggregatedAdminEdge OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Admin Edge. range: 0-1.
|
|
0:Non-Edge
|
|
1:Edge."
|
|
::= { lcsCISTPorts 4 }
|
|
|
|
lcsCISTAggregatedAutoEdge OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Auto Edge. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPorts 5 }
|
|
|
|
lcsCISTAggregatedrestrictedRole OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port restricted Role. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPorts 6 }
|
|
|
|
lcsCISTAggregatedrestrictedTcn OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port restricted Tcn. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPorts 7 }
|
|
|
|
lcsCISTAggregatedbpduGuard OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port bpdu Guard. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPorts 8 }
|
|
|
|
lcsCISTAggregatedPointToPoint OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Point To Point. range: 0-2.
|
|
0:Forced True
|
|
1:Forced False.
|
|
2:Auto"
|
|
::= { lcsCISTPorts 9 }
|
|
|
|
|
|
lcsCISTPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSCISTPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST port table."
|
|
::= { lcsCISTPorts 10 }
|
|
|
|
lcsCISTPortsEntry OBJECT-TYPE
|
|
SYNTAX LCSCISTPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the CIST Ports Table."
|
|
INDEX { lcsCISTPortIndex }
|
|
::= { lcsCISTPortsTable 1 }
|
|
|
|
LCSCISTPortsEntry ::=
|
|
SEQUENCE {
|
|
lcsCISTPortIndex Integer32,
|
|
lcsCISTPortEnable Integer32,
|
|
lcsCISTPortPathCost Integer32,
|
|
lcsCISTPortPortPriority Integer32,
|
|
lcsCISTPortAdminEdge Integer32,
|
|
lcsCISTPortAutoEdge Integer32,
|
|
lcsCISTPortrestrictedRole Integer32,
|
|
lcsCISTPortrestrictedTcn Integer32,
|
|
lcsCISTPortbpduGuard Integer32,
|
|
lcsCISTPortPointToPoint Integer32,
|
|
lcsCISTPortRootGuard Integer32
|
|
}
|
|
|
|
lcsCISTPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..53)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Index. range: 1-53. 53 is Aggregated Port Configuration."
|
|
::= { lcsCISTPortsEntry 1 }
|
|
|
|
lcsCISTPortEnable OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Enable. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPortsEntry 2 }
|
|
|
|
lcsCISTPortPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Path Cost. range: 0-200000000. 0 is Auto."
|
|
::= { lcsCISTPortsEntry 3 }
|
|
|
|
lcsCISTPortPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Priority. range: 0-240, multiple of 16."
|
|
::= { lcsCISTPortsEntry 4 }
|
|
|
|
lcsCISTPortAdminEdge OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Admin Edge. range: 0-1.
|
|
0:Non-Edge
|
|
1:Edge."
|
|
::= { lcsCISTPortsEntry 5 }
|
|
|
|
lcsCISTPortAutoEdge OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Auto Edge. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPortsEntry 6 }
|
|
|
|
lcsCISTPortrestrictedRole OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port restricted Role. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPortsEntry 7 }
|
|
|
|
lcsCISTPortrestrictedTcn OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port restricted Tcn. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPortsEntry 8 }
|
|
|
|
lcsCISTPortbpduGuard OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port bpdu Guard. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPortsEntry 9 }
|
|
|
|
lcsCISTPortPointToPoint OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port Point To Point. range: 0-2.
|
|
0:Forced True
|
|
1:Forced False.
|
|
2:Auto"
|
|
::= { lcsCISTPortsEntry 10 }
|
|
|
|
lcsCISTPortRootGuard OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIST Port root guard. range: 0-1.
|
|
0:disable
|
|
1:enable."
|
|
::= { lcsCISTPortsEntry 11 }
|
|
|
|
lcsMSTIPorts OBJECT IDENTIFIER ::= { lcsSpanningTree 6 }
|
|
|
|
|
|
lcsMSTIAggregatedPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMSTIAggregatedPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of MSTI ports."
|
|
::= { lcsMSTIPorts 1 }
|
|
|
|
lcsMSTIAggregatedPortsEntry OBJECT-TYPE
|
|
SYNTAX LCSMSTIAggregatedPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the MSTI ports Table."
|
|
INDEX { lcsMSTIAggregatedPortsMSTIndex }
|
|
::= { lcsMSTIAggregatedPortsTable 1 }
|
|
|
|
LCSMSTIAggregatedPortsEntry ::=
|
|
SEQUENCE {
|
|
lcsMSTIAggregatedPortsMSTIndex Integer32,
|
|
lcsMSTIAggregatedPortsPathCost Integer32,
|
|
lcsMSTIAggregatedPortsPortPriority Integer32
|
|
}
|
|
|
|
lcsMSTIAggregatedPortsMSTIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MST index, range:1-7"
|
|
::= {lcsMSTIAggregatedPortsEntry 1 }
|
|
|
|
lcsMSTIAggregatedPortsPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MST Path Cost. range: 0-200000000. 0 is Auto."
|
|
::= {lcsMSTIAggregatedPortsEntry 3 }
|
|
|
|
lcsMSTIAggregatedPortsPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MST Port Priority. range: 0-240, multiple of 16."
|
|
::= {lcsMSTIAggregatedPortsEntry 4 }
|
|
|
|
|
|
lcsMSTIPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMSTIPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of MSTI ports."
|
|
::= { lcsMSTIPorts 2 }
|
|
|
|
lcsMSTIPortsEntry OBJECT-TYPE
|
|
SYNTAX LCSMSTIPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the MSTI ports Table."
|
|
INDEX { lcsMSTIPortsMSTIndex, lcsMSTIPortsPortIndex }
|
|
::= { lcsMSTIPortsTable 1 }
|
|
|
|
LCSMSTIPortsEntry ::=
|
|
SEQUENCE {
|
|
lcsMSTIPortsMSTIndex Integer32,
|
|
lcsMSTIPortsPortIndex Integer32,
|
|
lcsMSTIPortsPathCost Integer32,
|
|
lcsMSTIPortsPortPriority Integer32
|
|
}
|
|
|
|
lcsMSTIPortsMSTIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MST index, range:1-7"
|
|
::= {lcsMSTIPortsEntry 1 }
|
|
|
|
lcsMSTIPortsPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..53)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port index, range 1-53, 53 is Aggregated Ports Configuration."
|
|
::= {lcsMSTIPortsEntry 2 }
|
|
|
|
lcsMSTIPortsPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MST Path Cost. range: 0-200000000. 0 is Auto."
|
|
::= {lcsMSTIPortsEntry 3 }
|
|
|
|
lcsMSTIPortsPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MST Port Priority. range: 0-240, multiple of 16."
|
|
::= {lcsMSTIPortsEntry 4 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsPrivateVLANs OBJECT IDENTIFIER ::= { lcsConfiguration 19 }
|
|
|
|
lcsPVLANMembershipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPVLANMembershipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Private VLAN Membership."
|
|
::= { lcsPrivateVLANs 1 }
|
|
|
|
lcsPVLANMembershipEntry OBJECT-TYPE
|
|
SYNTAX LCSPVLANMembershipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the private VLAN table."
|
|
INDEX { lcsPVLANMembershipIndex }
|
|
::= { lcsPVLANMembershipTable 1 }
|
|
|
|
LCSPVLANMembershipEntry ::=
|
|
SEQUENCE {
|
|
lcsPVLANMembershipIndex Integer32,
|
|
lcsPVLANID Integer32,
|
|
lcsPVLANMembers DisplayString,
|
|
lcsPVLANRowStatus RowStatus
|
|
}
|
|
|
|
lcsPVLANMembershipIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..28)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PVLAN membership index. Range:1-28."
|
|
::= {lcsPVLANMembershipEntry 1 }
|
|
|
|
lcsPVLANID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..28)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PVLAN ID. Range:1-28."
|
|
::= {lcsPVLANMembershipEntry 2 }
|
|
|
|
lcsPVLANMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PVLAN Members. Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1',
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
::= {lcsPVLANMembershipEntry 3 }
|
|
|
|
lcsPVLANRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PVLAN Row Status."
|
|
::= {lcsPVLANMembershipEntry 4 }
|
|
|
|
lcsPVLANPortIsolationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPVLANPortIsolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Private VLAN Port Isolation."
|
|
::= { lcsPrivateVLANs 2 }
|
|
|
|
lcsPVLANPortIsolationEntry OBJECT-TYPE
|
|
SYNTAX LCSPVLANPortIsolationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the private VLAN table."
|
|
INDEX { lcsPVLANPortIsolationIndex }
|
|
::= { lcsPVLANPortIsolationTable 1 }
|
|
|
|
LCSPVLANPortIsolationEntry ::=
|
|
SEQUENCE {
|
|
lcsPVLANPortIsolationIndex Integer32,
|
|
lcsPVLANPortIsolationPortMembers Integer32
|
|
}
|
|
|
|
lcsPVLANPortIsolationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..28)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PVLAN Port Isolation Index. Range:1-28."
|
|
::= {lcsPVLANPortIsolationEntry 1 }
|
|
|
|
lcsPVLANPortIsolationPortMembers OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PVLAN Port Isolation Port Members enable/disable. Range:0-1.
|
|
1:Port Isolation enable on that port.
|
|
0:Port Isolation disable on that port."
|
|
::= {lcsPVLANPortIsolationEntry 2 }
|
|
|
|
-- =======================================================================================================================
|
|
|
|
|
|
lcssFlow OBJECT IDENTIFIER ::= { lcsConfiguration 20 }
|
|
|
|
lcssFlowVersion OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Uniquely identifies the version and implementation of this MIB. The version string must have the following structure: <MIB Version>;<Organization>;<Software Revision> where: <MIB Version> must be '1.3', the version of this MIB.
|
|
<Organization> the name of the organization responsible for the agent implementation. <Revision> the specific software build of this agent.
|
|
As an example, the string '1.3;InMon Corp.;2.1.1' indicates that this agent implements version '1.2' of the SFLOW MIB, that
|
|
it was developed by 'InMon Corp.' and that the software build is '2.1.1'.
|
|
The MIB Version will change with each revision of the SFLOW MIB.
|
|
Management entities must check the MIB Version and not attempt to manage agents with MIB Versions greater than that for which
|
|
they were designed.
|
|
Note: The sFlow Datagram Format has an independent version number which may change independently from <MIB Version>.
|
|
<MIB Version> applies to the structure and semantics of the SFLOW MIB only." DEFVAL { "1.3;;" }
|
|
::= { lcssFlow 1 }
|
|
|
|
lcssFlowAgentAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The address type of the address associated with this agent. Only ipv4 and ipv6 types are supported. ipv4:1, ipv6:2."
|
|
::= { lcssFlow 2 }
|
|
|
|
lcssFlowAgentAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the
|
|
agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not
|
|
change as interfaces are reconfigured, enabled, disabled, added or removed. A manager should be able to use the
|
|
sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can
|
|
be maintained."
|
|
::= { lcssFlow 3 }
|
|
--
|
|
-- Receiver Table
|
|
--
|
|
lcssFlowRcvrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSFlowRcvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of the receivers of sFlow information."
|
|
::= { lcssFlow 4 }
|
|
|
|
lcssFlowRcvrEntry OBJECT-TYPE
|
|
SYNTAX LCSSFlowRcvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Attributes of an sFlow Receiver."
|
|
INDEX { lcssFlowRcvrIndex }
|
|
::= { lcssFlowRcvrTable 1 }
|
|
|
|
LCSSFlowRcvrEntry ::= SEQUENCE {
|
|
lcssFlowRcvrIndex Integer32,
|
|
lcssFlowRcvrOwner OwnerString,
|
|
lcssFlowRcvrTimeout Integer32,
|
|
lcssFlowRcvrMaximumDatagramSize Integer32,
|
|
lcssFlowRcvrAddressType InetAddressType,
|
|
lcssFlowRcvrAddress IpAddress,
|
|
lcssFlowRcvrPort Integer32,
|
|
lcssFlowRcvrDatagramVersion Integer32,
|
|
lcssFlowRcvrMode Integer32
|
|
}
|
|
|
|
lcssFlowRcvrIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index into sFlowReceiverTable."
|
|
::= { lcssFlowRcvrEntry 1 }
|
|
|
|
lcssFlowRcvrOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The entity making use of this sFlowRcvrTable entry. The empty string indicates that the entry is currently unclaimed.
|
|
An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed before trying to claim it.
|
|
The entry is claimed by setting the owner string. The entry must be claimed before any changes can be made to other sampler
|
|
objects.
|
|
In order to avoid a race condition, the entity taking control of the sampler must set both the owner and a value for
|
|
sFlowRcvrTimeout in the same SNMP set request.
|
|
When a management entity is finished using the sampler, it should set the value of sFlowRcvrOwner back to unclaimed.
|
|
The agent must restore all other entities this row to their default values when the owner is set to unclaimed. It must
|
|
also free all other resources associated with this sFlowRcvrTable entry.
|
|
This mechanism provides no enforcement and relies on the cooperation of management entities in order to ensure that
|
|
competition for a receiver entry is fairly resolved." DEFVAL { "" }
|
|
::= { lcssFlowRcvrEntry 2 }
|
|
|
|
lcssFlowRcvrTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time (in seconds) remaining before the sampler is released and stops sampling. When set, the owner establishes control
|
|
for the specified period. When read, the remaining time in the interval is returned.
|
|
A management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one
|
|
expires.
|
|
When the interval expires, the agent is responsible for restoring all other entities in this row to their default
|
|
values. It must also free all other resources associated with this sFlowRcvrTable entry." DEFVAL { 0 }
|
|
::= { lcssFlowRcvrEntry 3 }
|
|
|
|
lcssFlowRcvrMaximumDatagramSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum number of data bytes that can be sent in a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow datagrams." DEFVAL { 1400 }
|
|
::= { lcssFlowRcvrEntry 4 }
|
|
|
|
lcssFlowRcvrAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of sFlowRcvrCollectorAddress." DEFVAL { ipv4 }
|
|
::= { lcssFlowRcvrEntry 5 }
|
|
|
|
lcssFlowRcvrAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent." DEFVAL { '00000000'h } -- 0.0.0.0
|
|
::= { lcssFlowRcvrEntry 6 }
|
|
|
|
lcssFlowRcvrPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The destination port for sFlow datagrams." DEFVAL { 6343 }
|
|
::= { lcssFlowRcvrEntry 7 }
|
|
|
|
lcssFlowRcvrDatagramVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The version of sFlow datagrams that should be sent.
|
|
When set to a value not support by the agent, the agent should adjust the value to the highest supported value less than the
|
|
requested value, or return an SNMP bad value error if no such value exists." DEFVAL { 5 }
|
|
::= { lcssFlowRcvrEntry 8 }
|
|
|
|
lcssFlowRcvrMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "sFlow mode.
|
|
0:Disable
|
|
1:Enable" DEFVAL { 0 }
|
|
::= { lcssFlowRcvrEntry 9 }
|
|
|
|
--
|
|
-- Flow Sampling Table
|
|
--
|
|
lcssFlowFsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSFlowFsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of the flow samplers within a device."
|
|
::= { lcssFlow 5 }
|
|
|
|
lcssFlowFsEntry OBJECT-TYPE
|
|
SYNTAX LCSSFlowFsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Attributes of a flow sampler."
|
|
INDEX { lcssFlowFsDataSource, lcssFlowFsInstance }
|
|
::= { lcssFlowFsTable 1 }
|
|
|
|
LCSSFlowFsEntry ::= SEQUENCE {
|
|
lcssFlowFsDataSource Integer32,
|
|
lcssFlowFsInstance Integer32,
|
|
lcssFlowFsReceiver Integer32,
|
|
lcssFlowFsPacketSamplingRate Integer32,
|
|
lcssFlowFsMaximumHeaderSize Integer32,
|
|
lcssFlowFsType Integer32
|
|
}
|
|
|
|
lcssFlowFsDataSource OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "sFlowDataSource for this flow sampler."
|
|
::= { lcssFlowFsEntry 1 }
|
|
|
|
lcssFlowFsInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sFlow instance for this flow sampler."
|
|
::= { lcssFlowFsEntry 2 }
|
|
|
|
lcssFlowFsReceiver OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SFlowReceiver for this flow sampler." DEFVAL { 0 }
|
|
::= { lcssFlowFsEntry 3 }
|
|
|
|
lcssFlowFsPacketSamplingRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The statistical sampling rate for packet sampling from this source.
|
|
Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its own algorithm to introduce variance
|
|
into the sampling so that exactly every Nth packet is not counted. A sampling rate of 1 counts all packets. A sampling
|
|
rate of 0 disables sampling.
|
|
The agent is permitted to have minimum and maximum allowable values for the sampling rate. A minimum rate lets the agent
|
|
designer set an upper bound on the overhead associated with sampling, and a maximum rate may be the result of hardware
|
|
restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the
|
|
sampling rate (again because of implementation considerations).
|
|
When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values
|
|
and has the closest achievable value.
|
|
When read, the agent must return the actual sampling rate it will be using (after the adjustments previously described). The
|
|
sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of
|
|
packets in the monitored flows." DEFVAL { 0 }
|
|
::= { lcssFlowFsEntry 4 }
|
|
|
|
lcssFlowFsMaximumHeaderSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum number of bytes that should be copied from a sampled packet. The agent may have an internal maximum and
|
|
minimum permissible sizes. If an attempt is made to set this value outside the permissible range then the agent should
|
|
adjust the value to the closest permissible value." DEFVAL { 128 }
|
|
::= { lcssFlowFsEntry 5 }
|
|
|
|
lcssFlowFsType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flow Sample Type.
|
|
1:Rx
|
|
2:Tx
|
|
3:All."
|
|
DEFVAL { 2 }
|
|
::= { lcssFlowFsEntry 6 }
|
|
--
|
|
-- Counter Polling Table
|
|
--
|
|
lcssFlowCpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSFlowCpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of the counter pollers within a device."
|
|
::= { lcssFlow 6 }
|
|
|
|
lcssFlowCpEntry OBJECT-TYPE
|
|
SYNTAX LCSSFlowCpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Attributes of a counter poller."
|
|
INDEX { lcssFlowCpDataSource, lcssFlowCpInstance }
|
|
::= { lcssFlowCpTable 1 }
|
|
|
|
LCSSFlowCpEntry ::= SEQUENCE {
|
|
lcssFlowCpDataSource Integer32,
|
|
lcssFlowCpInstance Integer32,
|
|
lcssFlowCpReceiver Integer32,
|
|
lcssFlowCpInterval Integer32
|
|
}
|
|
|
|
lcssFlowCpDataSource OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Identifies the source of the data for the counter poller."
|
|
::= { lcssFlowCpEntry 1 }
|
|
|
|
lcssFlowCpInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The sFlowInstance for this counter poller."
|
|
::= { lcssFlowCpEntry 2 }
|
|
|
|
lcssFlowCpReceiver OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SFlowReciever associated with this counter poller." DEFVAL { 0 }
|
|
::= { lcssFlowCpEntry 3 }
|
|
|
|
lcssFlowCpInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval
|
|
of 0 disables counter sampling.
|
|
The agent is permitted to have minimum and maximum allowable values for the counter polling interval. A minimum interval
|
|
lets the agent designer set an upper bound on the overhead associated with polling, and a maximum interval may be the
|
|
result of implementation restrictions (such as counter size). In addition not all values between the maximum and minimum may
|
|
be realizable as the sampling interval (again because of implementation considerations).
|
|
When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values
|
|
and has the closest achievable value.
|
|
When read, the agent must return the actual sampling interval it will be using (after the adjustments previously described).
|
|
The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number
|
|
of packets in the monitored flows." DEFVAL { 0 }
|
|
::= { lcssFlowCpEntry 4 }
|
|
|
|
lcsLLDP OBJECT IDENTIFIER ::= { lcsConfiguration 21 }
|
|
|
|
lcsLLDPConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLLDPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDP 1 }
|
|
|
|
lcsLLDPConfEntry OBJECT-TYPE
|
|
SYNTAX LCSLLDPConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLLDPIndex }
|
|
::= { lcsLLDPConfTable 1 }
|
|
|
|
LCSLLDPConfEntry ::= SEQUENCE {
|
|
lcsLLDPIndex Integer32,
|
|
lcsLLDPMode Integer32,
|
|
lcsLLDPCDPAware Integer32,
|
|
lcsLLDPTrap Integer32,
|
|
lcsLLDPPortDescr Integer32,
|
|
lcsLLDPSysName Integer32,
|
|
lcsLLDPSysDescr Integer32,
|
|
lcsLLDPSysCapa Integer32,
|
|
lcsLLDPMgmtAddr Integer32
|
|
}
|
|
|
|
lcsLLDPIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration index."
|
|
::= { lcsLLDPConfEntry 1 }
|
|
|
|
lcsLLDPMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Tx only
|
|
2:Rx only
|
|
3:Enabled"
|
|
::= { lcsLLDPConfEntry 2 }
|
|
|
|
lcsLLDPCDPAware OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPConfEntry 3 }
|
|
|
|
lcsLLDPTrap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPConfEntry 4 }
|
|
|
|
lcsLLDPPortDescr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPConfEntry 5 }
|
|
|
|
lcsLLDPSysName OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPConfEntry 6 }
|
|
|
|
lcsLLDPSysDescr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPConfEntry 7 }
|
|
|
|
lcsLLDPSysCapa OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPConfEntry 8 }
|
|
|
|
lcsLLDPMgmtAddr OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPConfEntry 9 }
|
|
|
|
lcsLLDPMEDCoordinatesLocation OBJECT IDENTIFIER ::= { lcsLLDP 2 }
|
|
|
|
lcsLLDPMEDLatitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Latitude SHOULD be normalized to within 0-90 degrees with a maximum of 4 digits."
|
|
::= { lcsLLDPMEDCoordinatesLocation 2 }
|
|
|
|
lcsLLDPMEDLatitudeDirection OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:North
|
|
1:South"
|
|
::= { lcsLLDPMEDCoordinatesLocation 3 }
|
|
|
|
lcsLLDPMEDLongitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Longitude SHOULD be normalized to within 0-180 degrees with a maximum of 4 digits."
|
|
::= { lcsLLDPMEDCoordinatesLocation 4 }
|
|
|
|
lcsLLDPMEDLongitudeDirection OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:East
|
|
1:West"
|
|
::= { lcsLLDPMEDCoordinatesLocation 5 }
|
|
|
|
lcsLLDPMEDAltitude OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Altitude SHOULD be normalized to within -2097151.9 to 2097151.9 with a maximum of 1 digits."
|
|
::= { lcsLLDPMEDCoordinatesLocation 6 }
|
|
|
|
lcsLLDPMEDAltitudeType OBJECT-TYPE
|
|
SYNTAX Integer32(1|2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1:Meters
|
|
2:Floors"
|
|
::= { lcsLLDPMEDCoordinatesLocation 7 }
|
|
|
|
lcsLLDPMEDMapDatum OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Map Datum is used for the coordinates given in these options:
|
|
1:WGS84
|
|
2:NAD83/NAVD88
|
|
3:NAD83/MLLW
|
|
"
|
|
::= { lcsLLDPMEDCoordinatesLocation 8 }
|
|
|
|
lcsLLDPMEDCivicAddressLocation OBJECT IDENTIFIER ::= { lcsLLDP 4 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationCountryCode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 2 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationStateProvince OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 3 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationCounty OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 4 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationCity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 5 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationCityDistrict OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 6 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationBlockNeighborhood OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 7 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationStreet OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 8 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationLeadingStreetDirection OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 9 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationTrailingStreetSuffix OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 10 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationStreetSuffix OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 11 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationHouseNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 12 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationHouseNoSuffix OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 13 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationLandmark OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 14 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationAdditionalLocationInfo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 15 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 16 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationZipCode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 17 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationBuilding OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 18 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationApartment OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 19 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationFloor OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 20 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationRoomNo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 21 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationPlaceType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 22 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationPostalCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 23 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationPOBox OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 24 }
|
|
|
|
lcsLLDPMEDCivicAddressLocationAdditionalCode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDCivicAddressLocation 25 }
|
|
|
|
|
|
lcsLLDPMEDPoliciesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLLDPMEDPoliciesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDP 5 }
|
|
|
|
lcsLLDPMEDPoliciesEntry OBJECT-TYPE
|
|
SYNTAX LCSLLDPMEDPoliciesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLLDPMEDPoliciesIndex }
|
|
::= { lcsLLDPMEDPoliciesTable 1 }
|
|
|
|
LCSLLDPMEDPoliciesEntry ::= SEQUENCE {
|
|
lcsLLDPMEDPoliciesIndex Integer32,
|
|
lcsLLDPMEDPoliciesPolicyID Integer32,
|
|
lcsLLDPMEDPoliciesApplicationType Integer32,
|
|
lcsLLDPMEDPoliciesTag Integer32,
|
|
lcsLLDPMEDPoliciesVLANID Integer32,
|
|
lcsLLDPMEDPoliciesL2Priority Integer32,
|
|
lcsLLDPMEDPoliciesDSCP Integer32,
|
|
lcsLLDPMEDPoliciesRowStatus RowStatus
|
|
}
|
|
|
|
lcsLLDPMEDPoliciesIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsLLDPMEDPoliciesEntry 1 }
|
|
|
|
lcsLLDPMEDPoliciesPolicyID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDPMEDPoliciesEntry 2 }
|
|
|
|
lcsLLDPMEDPoliciesApplicationType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1:Voice
|
|
2:Voice Signalling
|
|
3:Guest Voice
|
|
4:Guest Voice Signalling
|
|
5:Softphone Voice
|
|
6:Video Conferencing
|
|
7:Streaming Video
|
|
8:Video Signalling"
|
|
::= { lcsLLDPMEDPoliciesEntry 3 }
|
|
|
|
lcsLLDPMEDPoliciesTag OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Untagged
|
|
1:Tagged"
|
|
::= { lcsLLDPMEDPoliciesEntry 4 }
|
|
|
|
lcsLLDPMEDPoliciesVLANID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:1-4094"
|
|
::= { lcsLLDPMEDPoliciesEntry 5 }
|
|
|
|
lcsLLDPMEDPoliciesL2Priority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:0-7"
|
|
::= { lcsLLDPMEDPoliciesEntry 6 }
|
|
|
|
lcsLLDPMEDPoliciesDSCP OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:0-63"
|
|
::= { lcsLLDPMEDPoliciesEntry 7 }
|
|
|
|
lcsLLDPMEDPoliciesRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= { lcsLLDPMEDPoliciesEntry 8 }
|
|
|
|
lcsLLDPMEDPolicyPortConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLLDPMEDPolicyPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDP 6 }
|
|
|
|
lcsLLDPMEDPolicyPortConfEntry OBJECT-TYPE
|
|
SYNTAX LCSLLDPMEDPolicyPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLLDPMEDPolicyPortConfPort }
|
|
::= { lcsLLDPMEDPolicyPortConfTable 1 }
|
|
|
|
LCSLLDPMEDPolicyPortConfEntry ::= SEQUENCE {
|
|
lcsLLDPMEDPolicyPortConfPort Integer32,
|
|
lcsLLDPMEDPolicyPortConf Integer32
|
|
}
|
|
|
|
lcsLLDPMEDPolicyPortConfPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsLLDPMEDPolicyPortConfEntry 1 }
|
|
|
|
lcsLLDPMEDPolicyPortConf OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= { lcsLLDPMEDPolicyPortConfEntry 2 }
|
|
|
|
lcsLLDPMEDFastStartRepeatCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:1-10"
|
|
::= { lcsLLDP 7 }
|
|
|
|
lcsLLDPMEDEmergencyCallService OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLLDP 8 }
|
|
|
|
lcsUDLD OBJECT IDENTIFIER ::= { lcsConfiguration 22 }
|
|
|
|
lcsUDLDPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSUDLDPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLD 1 }
|
|
|
|
lcsUDLDPortConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSUDLDPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsUDLDPort }
|
|
::= { lcsUDLDPortConfigTable 1 }
|
|
|
|
LCSUDLDPortConfigEntry ::= SEQUENCE {
|
|
lcsUDLDPort Integer32,
|
|
lcsUDLDPortMode Integer32,
|
|
lcsUDLDPortMessageInterval Integer32
|
|
}
|
|
|
|
lcsUDLDPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortConfigEntry 1 }
|
|
|
|
lcsUDLDPortMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1|2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: Normal
|
|
2: Aggressive"
|
|
::= { lcsUDLDPortConfigEntry 2 }
|
|
|
|
lcsUDLDPortMessageInterval OBJECT-TYPE
|
|
SYNTAX Integer32(7..90)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 7, range: 7-90"
|
|
::= { lcsUDLDPortConfigEntry 3 }
|
|
|
|
|
|
lcsUDLDPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSUDLDPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLD 2 }
|
|
|
|
lcsUDLDPortStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSUDLDPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsUDLDPortStatusPort }
|
|
::= { lcsUDLDPortStatusTable 1 }
|
|
|
|
LCSUDLDPortStatusEntry ::= SEQUENCE {
|
|
lcsUDLDPortStatusPort Integer32,
|
|
lcsUDLDStatusAdminState Integer32,
|
|
lcsUDLDStatusDeviceIDLocal DisplayString,
|
|
lcsUDLDStatusDeviceNameLocal DisplayString,
|
|
lcsUDLDStatusBidirectionalState DisplayString
|
|
}
|
|
|
|
lcsUDLDPortStatusPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port index"
|
|
::= { lcsUDLDPortStatusEntry 1 }
|
|
|
|
lcsUDLDStatusAdminState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= { lcsUDLDPortStatusEntry 2 }
|
|
|
|
lcsUDLDStatusDeviceIDLocal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortStatusEntry 3 }
|
|
|
|
lcsUDLDStatusDeviceNameLocal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortStatusEntry 4 }
|
|
|
|
lcsUDLDStatusBidirectionalState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortStatusEntry 5 }
|
|
|
|
|
|
lcsUDLDStatusPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify port number for check neighbour status"
|
|
::= { lcsUDLD 3 }
|
|
|
|
lcsUDLDPortNeighbourStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSUDLDPortNeighbourStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLD 4 }
|
|
|
|
lcsUDLDPortNeighbourStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSUDLDPortNeighbourStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsUDLDNeighbourPort }
|
|
::= { lcsUDLDPortNeighbourStatusTable 1 }
|
|
|
|
LCSUDLDPortNeighbourStatusEntry ::= SEQUENCE {
|
|
lcsUDLDNeighbourPort Integer32,
|
|
lcsUDLDNeighbourStatusPort DisplayString,
|
|
lcsUDLDNeighbourStatusDeviceId DisplayString,
|
|
lcsUDLDNeighbourStatusLinkStatus DisplayString,
|
|
lcsUDLDNeighbourStatusDeviceName DisplayString
|
|
}
|
|
|
|
lcsUDLDNeighbourPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsUDLDPortNeighbourStatusEntry 1 }
|
|
|
|
lcsUDLDNeighbourStatusPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortNeighbourStatusEntry 2 }
|
|
|
|
lcsUDLDNeighbourStatusDeviceId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortNeighbourStatusEntry 3 }
|
|
|
|
lcsUDLDNeighbourStatusLinkStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortNeighbourStatusEntry 4 }
|
|
|
|
lcsUDLDNeighbourStatusDeviceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsUDLDPortNeighbourStatusEntry 5 }
|
|
-- =======================================================================================================================
|
|
lcsEPS OBJECT IDENTIFIER ::= { lcsConfiguration 23 }
|
|
|
|
lcsEPSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSEPSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of EPS."
|
|
::= { lcsEPS 1 }
|
|
|
|
lcsEPSEntry OBJECT-TYPE
|
|
SYNTAX LCSEPSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { lcsEPSIndex }
|
|
::= { lcsEPSTable 1 }
|
|
|
|
LCSEPSEntry ::=
|
|
SEQUENCE {
|
|
lcsEPSIndex Integer32,
|
|
lcsEpsID Integer32,
|
|
lcsEpsDomain Integer32,
|
|
lcsEpsArchitecture Integer32,
|
|
lcsEpsWFlow Integer32,
|
|
lcsEpsPFlow Integer32,
|
|
lcsEpsWSFMEP Integer32,
|
|
lcsEpsPSFMEP Integer32,
|
|
lcsEpsAPSMEP Integer32,
|
|
lcsEpsAlarm Integer32,
|
|
lcsEpsRowStatus RowStatus
|
|
}
|
|
|
|
lcsEPSIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsEPSEntry 1 }
|
|
|
|
lcsEpsID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EPS ID. Range:1-100."
|
|
::= {lcsEPSEntry 2 }
|
|
|
|
lcsEpsDomain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EPS Domain. Range:0.
|
|
0:Domain is Port"
|
|
::= {lcsEPSEntry 3 }
|
|
|
|
lcsEpsArchitecture OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EPS Architecture. Range:0-1.
|
|
0:Architecture is 1+1
|
|
1:Architecture is 1:1"
|
|
::= {lcsEPSEntry 4 }
|
|
|
|
lcsEpsWFlow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The working flow for the EPS."
|
|
::= {lcsEPSEntry 5 }
|
|
|
|
lcsEpsPFlow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protecting flow for the EPS"
|
|
::= {lcsEPSEntry 6 }
|
|
|
|
lcsEpsWSFMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The working Signal Fail reporting MEP."
|
|
::= {lcsEPSEntry 7 }
|
|
|
|
lcsEpsPSFMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protecting Signal Fail reporting MEP."
|
|
::= {lcsEPSEntry 8 }
|
|
|
|
lcsEpsAPSMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The APS PDU handling MEP."
|
|
::= {lcsEPSEntry 9 }
|
|
|
|
lcsEpsAlarm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an active alarm on the EPS."
|
|
::= {lcsEPSEntry 10 }
|
|
|
|
lcsEpsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EPS Row Status."
|
|
::= {lcsEPSEntry 11 }
|
|
|
|
lcsEpsConfigInstanceEpsID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify EPS ID for table uesd."
|
|
::= {lcsEPS 2 }
|
|
|
|
|
|
lcsEPSConfigInstanceEntry OBJECT IDENTIFIER ::= { lcsEPS 3 }
|
|
|
|
lcsEpsConfigInstanceProtectionType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:0-1.
|
|
0:Unidirectional: EPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1.
|
|
1:Bidirectional: EPS in the two ends is selecting traffic from the same working/protecting flow. This requires APS enabled. This is mandatory for 1:1"
|
|
::= { lcsEPSConfigInstanceEntry 2 }
|
|
|
|
lcsEpsConfigInstanceAPS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:0-1.
|
|
0:disable
|
|
1:enable
|
|
The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1."
|
|
::= { lcsEPSConfigInstanceEntry 3 }
|
|
|
|
lcsEpsConfigInstanceRevertive OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:0-1.
|
|
0:disable
|
|
1:enable
|
|
The revertive switching to working flow can be enabled/disabled.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 4 }
|
|
|
|
lcsEpsConfigInstanceWTRTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Wait To Restore timing value to be used in revertive switching. Range is 1 to 720 seconds.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 5 }
|
|
|
|
lcsEpsConfigInstanceHoldOffTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timing value to be used to make persistent check on Signal Fail before switching. This is in 100 ms. and the max value is 100 (10 sec)."
|
|
::= { lcsEPSConfigInstanceEntry 6 }
|
|
|
|
lcsEpsConfigInstanceCommand OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:None
|
|
1:Clear
|
|
2:Lock Out
|
|
3:Forced switch
|
|
4:Manual switch P
|
|
5:Manual switch W
|
|
6:Exercise
|
|
7:Freeze
|
|
8:Lock Out Local
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 7 }
|
|
|
|
lcsEpsStatusProtectionState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EPS state according to State Transition Tables in G.8031.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 8 }
|
|
|
|
lcsEpsStatusWorkingFlowState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OK: State of working flow is ok
|
|
SF: State of working flow is Signal Fail
|
|
SD: State of working flow is Signal Degrade (for future use)
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 9 }
|
|
|
|
lcsEpsStatusProtectingFlowState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OK: State of protecting flow is ok
|
|
SF: State of protecting flow is Signal Fail
|
|
SD: State of protecting flow is Signal Degrade (for future use)
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 10 }
|
|
|
|
lcsEpsStatusTransmittedApsRequest OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted APS according to State Transition Tables in G.8031.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 11 }
|
|
|
|
lcsEpsStatusTransmittedApsReSignal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted APS according to State Transition Tables in G.8031.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 12 }
|
|
|
|
lcsEpsStatusTransmittedApsBrSignal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted APS according to State Transition Tables in G.8031.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 13 }
|
|
|
|
lcsEpsStatusReceivedApsRequest OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received APS according to State Transition Tables in G.8031.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 14 }
|
|
|
|
lcsEpsStatusReceivedApsReSignal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received APS according to State Transition Tables in G.8031.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 15 }
|
|
|
|
lcsEpsStatusReceivedApsBrSignal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received APS according to State Transition Tables in G.8031.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 16 }
|
|
|
|
lcsEpsStatusArchitectureMismatch OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The architecture indicated in the received APS does not match the locally configured.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 17 }
|
|
|
|
lcsEpsStatusAPSOnWorking OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APS is received on the working flow.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 18 }
|
|
|
|
lcsEpsStatusSwitchingIncomplete OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic is not selected from the same flow instance in the two ends.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 19 }
|
|
|
|
lcsEpsStatusNoApsReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APS PDU is not received from the other end.
|
|
"
|
|
::= { lcsEPSConfigInstanceEntry 20 }
|
|
|
|
-- =======================================================================================================================
|
|
|
|
lcsERPS OBJECT IDENTIFIER ::= { lcsConfiguration 24 }
|
|
|
|
lcsERPSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSERPSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ERPS."
|
|
::= { lcsERPS 1 }
|
|
|
|
lcsERPSEntry OBJECT-TYPE
|
|
SYNTAX LCSERPSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { lcsErpsIndex }
|
|
::= { lcsERPSTable 1 }
|
|
|
|
LCSERPSEntry ::=
|
|
SEQUENCE {
|
|
lcsErpsIndex Integer32,
|
|
lcsErpsID Integer32,
|
|
lcsErpsPort0 Integer32,
|
|
lcsErpsPort1 Integer32,
|
|
lcsErpsPort0APSMEP Integer32,
|
|
lcsErpsPort1APSMEP Integer32,
|
|
lcsErpsPort0SFMEP Integer32,
|
|
lcsErpsPort1SFMEP Integer32,
|
|
lcsErpsRingType Integer32,
|
|
lcsErpsInterconnectedNode Integer32,
|
|
lcsErpsVirtualChannel Integer32,
|
|
lcsErpsMajorRingID Integer32,
|
|
lcsErpsAlarm Integer32,
|
|
lcsErpsRowStatus RowStatus
|
|
}
|
|
|
|
lcsErpsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsERPSEntry 1 }
|
|
|
|
lcsErpsID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ERPS ID. Range:1-64."
|
|
::= {lcsERPSEntry 2 }
|
|
|
|
lcsErpsPort0 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will create a Port 0 of the switch in the ring."
|
|
::= {lcsERPSEntry 3 }
|
|
|
|
lcsErpsPort1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will create Port 1 of the switch in the Ring.
|
|
As interconnected sub-ring will have only one ring port, Port 1 is configured as 0 for interconnected sub-ring.
|
|
0 in this field indicates that no Port 1 is associated with this instance"
|
|
::= {lcsERPSEntry 4 }
|
|
|
|
lcsErpsPort0APSMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 0 APS PDU handling MEP.
|
|
Range: 1-100."
|
|
::= {lcsERPSEntry 5 }
|
|
|
|
lcsErpsPort1APSMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 1 APS PDU handling MEP.
|
|
Range: 1-100."
|
|
::= {lcsERPSEntry 6 }
|
|
|
|
lcsErpsPort0SFMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 0 Signal Fail reporting MEP.
|
|
Range: 1-100."
|
|
::= {lcsERPSEntry 7 }
|
|
|
|
lcsErpsPort1SFMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port 1 Signal Fail reporting MEP.
|
|
Range: 1-100."
|
|
::= {lcsERPSEntry 8 }
|
|
|
|
lcsErpsRingType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Protecting ring. It can be either major ring or sub-ring.
|
|
0:Major
|
|
1:Sub"
|
|
::= {lcsERPSEntry 9 }
|
|
|
|
lcsErpsInterconnectedNode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interconnected Node indicates that the ring instance is interconnected.
|
|
0: not interconnected
|
|
1: interconnected"
|
|
::= {lcsERPSEntry 10 }
|
|
|
|
lcsErpsVirtualChannel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: indicates it is a sub-ring with virtual channel.
|
|
0: indicates, sub-ring doesn't have virtual channel."
|
|
::= {lcsERPSEntry 11 }
|
|
|
|
lcsErpsMajorRingID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Major ring group ID for the interconnected sub-ring.
|
|
Range:1-64"
|
|
::= {lcsERPSEntry 12 }
|
|
|
|
lcsErpsAlarm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an active alarm on the ERPS."
|
|
::= {lcsERPSEntry 13 }
|
|
|
|
lcsErpsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ERPS Row Status."
|
|
::= {lcsERPSEntry 14 }
|
|
|
|
|
|
lcsErpsConfigInstanceErpsID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify ERPS ID for ERPSConfigInstanceEntry and ErpsConfigInstanceVLANConfigTable uesd."
|
|
::= {lcsERPS 2 }
|
|
|
|
|
|
lcsERPSConfigInstanceEntry OBJECT IDENTIFIER ::= { lcsERPS 3 }
|
|
|
|
lcsErpsConfigInstanceConfigured OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Down: This ERPS is only created and has not yet been configured - is not active.
|
|
Up: This ERPS is configured - is active."
|
|
::= { lcsERPSConfigInstanceEntry 2 }
|
|
|
|
lcsErpsConfigInstanceGuardTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The period of the guard timer can be configured in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms.
|
|
Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages."
|
|
::= { lcsERPSConfigInstanceEntry 3 }
|
|
|
|
lcsErpsConfigInstanceWTRTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Wait To Restore timing value to be used in revertive switching.
|
|
The period of the WTR time can be configured by the operator in 1 minute steps between 5 and 12 minutes with a default value of 5 minutes.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 4 }
|
|
|
|
lcsErpsConfigInstanceHoldOffTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timing value to be used to make persistent check on Signal Fail before switching.
|
|
The range of the hold off timer is 0 to 10 seconds in steps of 100 ms
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 5 }
|
|
|
|
lcsErpsConfigInstanceVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ERPS Protocol Version - v1 or v2
|
|
1:v1
|
|
2:v2"
|
|
::= { lcsERPSConfigInstanceEntry 6 }
|
|
|
|
lcsErpsConfigInstanceRevertive OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1:Revertive mode
|
|
0:Non-Revertive mode"
|
|
::= { lcsERPSConfigInstanceEntry 7 }
|
|
|
|
lcsErpsConfigInstanceRPLRole OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It can be either RPL owner or RPL Neighbor.
|
|
0:None
|
|
1:RPL owner
|
|
2:RPL Neighbor
|
|
Please set RPLPort first.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 8 }
|
|
|
|
lcsErpsConfigInstanceRPLPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This allows to select the east port or west port as the RPL block.
|
|
0:None
|
|
1:Port0
|
|
2:Port1
|
|
Please set RPLRole after specify RPLPort.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 9 }
|
|
|
|
lcsErpsConfigInstanceClear OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the owner has to be changed, then the clear check box allows to clear the RPL owner for that ERPS ring.
|
|
0: no clear
|
|
1: clear
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 10 }
|
|
|
|
lcsErpsConfigInstanceTopologyChange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: indicates that the topology changes in the sub-ring are propagated in the major ring.
|
|
0: indicates that the topology changes in the sub-ring are not propagated in the major ring.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 11 }
|
|
|
|
lcsErpsConfigInstanceCommand OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:None
|
|
1:Manual Switch
|
|
2:Forced Switch
|
|
3:Clear
|
|
Please set InstancePort first.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 12 }
|
|
|
|
lcsErpsConfigInstancePort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:None
|
|
1:Port0
|
|
2:Port1
|
|
Please set InstanceCommand after specify InstancePort.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 13 }
|
|
|
|
lcsErpsStatusProtectionState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ERPS state according to State Transition Tables in G.8032.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 14 }
|
|
|
|
lcsErpsStatusPort0 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OK: State of East port is ok
|
|
SF: State of East port is Signal Fail
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 15 }
|
|
|
|
lcsErpsStatusPort1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OK: State of West port is ok
|
|
SF: State of West port is Signal Fail
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 16 }
|
|
|
|
lcsErpsStatusTransmitAPS OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted APS according to State Transition Tables in G.8032.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 17 }
|
|
|
|
lcsErpsStatusPort0ReceiveAPS OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received APS on Port 0 according to State Transition Tables in G.8032.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 18 }
|
|
|
|
lcsErpsStatusPort1ReceiveAPS OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received APS on Port 1 according to State Transition Tables in G.8032.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 19 }
|
|
|
|
lcsErpsStatusWTRRemaining OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remaining WTR timeout in milliseconds.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 20 }
|
|
|
|
lcsErpsStatusRPLUnblocked OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"APS is received on the working flow.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 21 }
|
|
|
|
lcsErpsStatusNoAPSReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RAPS PDU is not received from the other end.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 22 }
|
|
|
|
lcsErpsStatusPort0BlockStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Block status for Port 0 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 23 }
|
|
|
|
lcsErpsStatusPort1BlockStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Block status for Port 1 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel.
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 24 }
|
|
|
|
lcsErpsStatusFOPAlarm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Failure of Protocol Defect(FOP) status:
|
|
FOP is not detected
|
|
FOP is detected
|
|
"
|
|
::= { lcsERPSConfigInstanceEntry 25 }
|
|
|
|
lcsErpsConfigInstanceVLANConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSErpsConfigInstanceVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of ERPS VLANConfig."
|
|
::= { lcsERPS 4 }
|
|
|
|
lcsErpsConfigInstanceVLANConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSErpsConfigInstanceVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { lcsErpsConfigInstanceVLANConfigIndex }
|
|
::= { lcsErpsConfigInstanceVLANConfigTable 1 }
|
|
|
|
LCSErpsConfigInstanceVLANConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsErpsConfigInstanceVLANConfigIndex Integer32,
|
|
lcsErpsConfigInstanceVLANConfigVLANID Integer32,
|
|
lcsErpsConfigInstanceVLANConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsErpsConfigInstanceVLANConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsErpsConfigInstanceVLANConfigEntry 1 }
|
|
|
|
lcsErpsConfigInstanceVLANConfigVLANID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ERPS VLAN Config ID. Range:1-4094."
|
|
::= {lcsErpsConfigInstanceVLANConfigEntry 2 }
|
|
|
|
lcsErpsConfigInstanceVLANConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ERPS VLAN Config Row Status."
|
|
::= {lcsErpsConfigInstanceVLANConfigEntry 3 }
|
|
-- =======================================================================================================================
|
|
|
|
lcsVLANTranslation OBJECT IDENTIFIER ::= { lcsConfiguration 25 }
|
|
|
|
lcsVLANTranslationPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVLANTranslationPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of VLANTranslationPort."
|
|
::= { lcsVLANTranslation 1 }
|
|
|
|
lcsVLANTranslationPortEntry OBJECT-TYPE
|
|
SYNTAX LCSVLANTranslationPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the VLANTranslationPort table."
|
|
INDEX { lcsVLANTranslationPortIndex }
|
|
::= { lcsVLANTranslationPortTable 1 }
|
|
|
|
LCSVLANTranslationPortEntry ::=
|
|
SEQUENCE {
|
|
lcsVLANTranslationPortIndex Integer32,
|
|
lcsVLANTranslationPortDefault Integer32,
|
|
lcsVLANTranslationPortGroupID Integer32
|
|
}
|
|
|
|
lcsVLANTranslationPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLANTranslationPort index."
|
|
::= {lcsVLANTranslationPortEntry 1 }
|
|
|
|
lcsVLANTranslationPortDefault OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the switch port to use the default VLAN Translation Group.
|
|
1:set
|
|
0:not set"
|
|
::= {lcsVLANTranslationPortEntry 2 }
|
|
|
|
lcsVLANTranslationPortGroupID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN Translation mappings are organized into Groups, identified by the Group ID."
|
|
::= {lcsVLANTranslationPortEntry 3 }
|
|
|
|
|
|
|
|
lcsVLANTranslationMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVLANTranslationMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of VLANTranslationMapping."
|
|
::= { lcsVLANTranslation 2 }
|
|
|
|
lcsVLANTranslationMappingEntry OBJECT-TYPE
|
|
SYNTAX LCSVLANTranslationMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the VLANTranslationMapping table."
|
|
INDEX { lcsVLANTranslationMappingIndex }
|
|
::= { lcsVLANTranslationMappingTable 1 }
|
|
|
|
LCSVLANTranslationMappingEntry ::=
|
|
SEQUENCE {
|
|
lcsVLANTranslationMappingIndex Integer32,
|
|
lcsVLANTranslationMappingGroupID Integer32,
|
|
lcsVLANTranslationMappingVID Integer32,
|
|
lcsVLANTranslationMappingTVID Integer32,
|
|
lcsVLANTranslationMappingRowStatus RowStatus
|
|
}
|
|
|
|
lcsVLANTranslationMappingIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLANTranslationMapping index."
|
|
::= {lcsVLANTranslationMappingEntry 1 }
|
|
|
|
lcsVLANTranslationMappingGroupID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN Translation mappings are organized into Groups, identified by the Group ID."
|
|
::= {lcsVLANTranslationMappingEntry 2 }
|
|
|
|
lcsVLANTranslationMappingVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:1-4094"
|
|
::= {lcsVLANTranslationMappingEntry 3 }
|
|
|
|
lcsVLANTranslationMappingTVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range:1-4094"
|
|
::= {lcsVLANTranslationMappingEntry 4 }
|
|
|
|
lcsVLANTranslationMappingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLANTranslationMapping Row Status."
|
|
::= {lcsVLANTranslationMappingEntry 5 }
|
|
-- ========================================================================================================
|
|
lcsMEP OBJECT IDENTIFIER ::= { lcsConfiguration 26 }
|
|
|
|
lcsMEPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMEPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of MEP."
|
|
::= { lcsMEP 1 }
|
|
|
|
lcsMEPEntry OBJECT-TYPE
|
|
SYNTAX LCSMEPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the MEP table."
|
|
INDEX { lcsMEPIndex }
|
|
::= { lcsMEPTable 1 }
|
|
|
|
LCSMEPEntry ::=
|
|
SEQUENCE {
|
|
lcsMEPIndex Integer32,
|
|
lcsMepInstance Integer32,
|
|
lcsMepDomain Integer32,
|
|
lcsMepMode Integer32,
|
|
lcsMepDirection Integer32,
|
|
lcsMepResidencePort Integer32,
|
|
lcsMepLevel Integer32,
|
|
lcsMepFlowInstance Integer32,
|
|
lcsMepTaggedVID Integer32,
|
|
lcsMepEPSInstance DisplayString,
|
|
lcsMepThisMAC DisplayString,
|
|
lcsMepAlarm DisplayString,
|
|
lcsMepRowStatus RowStatus
|
|
}
|
|
|
|
lcsMEPIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEP Table index."
|
|
::= {lcsMEPEntry 1 }
|
|
|
|
lcsMepInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 2 }
|
|
|
|
lcsMepDomain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 3 }
|
|
|
|
lcsMepMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 4 }
|
|
|
|
lcsMepDirection OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 5 }
|
|
|
|
lcsMepResidencePort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 6 }
|
|
|
|
lcsMepLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 7 }
|
|
|
|
lcsMepFlowInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 8 }
|
|
|
|
lcsMepTaggedVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 9 }
|
|
|
|
lcsMepEPSInstance OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 10 }
|
|
|
|
lcsMepThisMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 11 }
|
|
|
|
lcsMepAlarm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMEPEntry 12 }
|
|
|
|
lcsMepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEP Row Status."
|
|
::= {lcsMEPEntry 13 }
|
|
|
|
lcsMepInstanceID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify MEP Instance ID for the following item and table uesd."
|
|
::= {lcsMEP 2 }
|
|
|
|
|
|
lcsMepInstanceConfEntry OBJECT IDENTIFIER ::= { lcsMEP 3 }
|
|
|
|
lcsMepInstanceConfLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 2 }
|
|
|
|
lcsMepInstanceConfFormat OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 3 }
|
|
|
|
lcsMepInstanceConfDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 4 }
|
|
|
|
lcsMepInstanceConfMEGid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 5 }
|
|
|
|
lcsMepInstanceConfMEPid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 6 }
|
|
|
|
lcsMepInstanceConfTaggedVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 7 }
|
|
|
|
lcsMepInstanceConfSyslog OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 8 }
|
|
|
|
lcsMepInstanceConfcLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 9 }
|
|
|
|
lcsMepInstanceConfcMEG OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 10 }
|
|
|
|
lcsMepInstanceConfcMEP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 11 }
|
|
|
|
lcsMepInstanceConfcAIS OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 12 }
|
|
|
|
lcsMepInstanceConfcLCK OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 13 }
|
|
|
|
lcsMepInstanceConfcLoop OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 14 }
|
|
|
|
lcsMepInstanceConfcConfig OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 15 }
|
|
|
|
lcsMepInstanceConfcDEG OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 16 }
|
|
|
|
lcsMepInstanceConfcSSF OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 17 }
|
|
|
|
lcsMepInstanceConfaBLK OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 18 }
|
|
|
|
lcsMepInstanceConfaTSD OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 19 }
|
|
|
|
lcsMepInstanceConfaTSF OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsMepInstanceConfEntry 20 }
|
|
|
|
|
|
lcsPeerMepConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPeerMepConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of MEP."
|
|
::= { lcsMEP 4 }
|
|
|
|
lcsPeerMepConfEntry OBJECT-TYPE
|
|
SYNTAX LCSPeerMepConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { lcsPeerMepConfIndex }
|
|
::= { lcsPeerMepConfTable 1 }
|
|
|
|
LCSPeerMepConfEntry ::=
|
|
SEQUENCE {
|
|
lcsPeerMepConfIndex Integer32,
|
|
lcsPeerMepConfPeerMEPID Integer32,
|
|
lcsPeerMepConfUnicastPeerMAC DisplayString,
|
|
lcsPeerMepConfcLOC DisplayString,
|
|
lcsPeerMepConfcRDI DisplayString,
|
|
lcsPeerMepConfcPeriod DisplayString,
|
|
lcsPeerMepConfcPriority DisplayString,
|
|
lcsPeerMepConfRowStatus RowStatus
|
|
}
|
|
|
|
lcsPeerMepConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsPeerMepConfEntry 1 }
|
|
|
|
lcsPeerMepConfPeerMEPID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peer MEP ID"
|
|
::= {lcsPeerMepConfEntry 2 }
|
|
|
|
lcsPeerMepConfUnicastPeerMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPeerMepConfEntry 3 }
|
|
|
|
lcsPeerMepConfcLOC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPeerMepConfEntry 4 }
|
|
|
|
lcsPeerMepConfcRDI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPeerMepConfEntry 5 }
|
|
|
|
lcsPeerMepConfcPeriod OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPeerMepConfEntry 6 }
|
|
|
|
lcsPeerMepConfcPriority OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPeerMepConfEntry 7 }
|
|
|
|
lcsPeerMepConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peer Mep Conf Row Status."
|
|
::= {lcsPeerMepConfEntry 8 }
|
|
|
|
lcsFunctionalConf OBJECT IDENTIFIER ::= { lcsMEP 5 }
|
|
|
|
lcsFunctionalConfContinuityCheckEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= {lcsFunctionalConf 2 }
|
|
|
|
lcsFunctionalConfContinuityCheckPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-7"
|
|
::= {lcsFunctionalConf 3 }
|
|
|
|
lcsFunctionalConfContinuityCheckFrameRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:1-7
|
|
1: 300 f/sec
|
|
2: 100 f/sec
|
|
3: 10 f/sec
|
|
4: 1 f/sec
|
|
5: 6 f/min
|
|
6: 1 f/min
|
|
7: 6 f/hour"
|
|
::= {lcsFunctionalConf 4 }
|
|
|
|
lcsFunctionalConfContinuityCheckTLV OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= {lcsFunctionalConf 5 }
|
|
|
|
lcsFunctionalConfAPSProtocolEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= {lcsFunctionalConf 6 }
|
|
|
|
lcsFunctionalConfAPSProtocolPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-7"
|
|
::= {lcsFunctionalConf 7 }
|
|
|
|
lcsFunctionalConfAPSProtocolCast OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: Unicast destination address
|
|
1: Multicast destination address"
|
|
::= {lcsFunctionalConf 8 }
|
|
|
|
lcsFunctionalConfAPSProtocolType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: Linear protection APS
|
|
2: Ring protection APS"
|
|
::= {lcsFunctionalConf 9 }
|
|
|
|
lcsFunctionalConfAPSProtocolLastOctet OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-255"
|
|
::= {lcsFunctionalConf 10 }
|
|
|
|
lcsTLVConf OBJECT IDENTIFIER ::= { lcsMEP 6 }
|
|
|
|
lcsTLVConfOUIFirst OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-255"
|
|
::= {lcsTLVConf 2 }
|
|
|
|
lcsTLVConfOUISecond OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-255"
|
|
::= {lcsTLVConf 3 }
|
|
|
|
lcsTLVConfOUIThird OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-255"
|
|
::= {lcsTLVConf 4 }
|
|
|
|
lcsTLVConfSubType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-255"
|
|
::= {lcsTLVConf 5 }
|
|
|
|
lcsTLVConfValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-255"
|
|
::= {lcsTLVConf 6 }
|
|
|
|
|
|
lcsTLVConfStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSTLVConfStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TLV Conf State Table"
|
|
::= { lcsMEP 7 }
|
|
|
|
lcsTLVConfStateEntry OBJECT-TYPE
|
|
SYNTAX LCSTLVConfStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TLV Conf State Entry"
|
|
INDEX { lcsTLVConfStateIndex }
|
|
::= { lcsTLVConfStateTable 1 }
|
|
|
|
LCSTLVConfStateEntry ::= SEQUENCE {
|
|
lcsTLVConfStateIndex Integer32,
|
|
lcsTLVConfStatePeerMEPID Integer32,
|
|
lcsTLVConfStateCCOrganizationSpecificOUIFirst Integer32,
|
|
lcsTLVConfStateCCOrganizationSpecificOUISecond Integer32,
|
|
lcsTLVConfStateCCOrganizationSpecificOUIThird Integer32,
|
|
lcsTLVConfStateCCOrganizationSpecificSubType Integer32,
|
|
lcsTLVConfStateCCOrganizationSpecificValue Integer32,
|
|
lcsTLVConfStateCCOrganizationSpecificLastRX DisplayString,
|
|
lcsTLVConfStateCCPortStatusValue Integer32,
|
|
lcsTLVConfStateCCPortStatusLastRX DisplayString,
|
|
lcsTLVConfStateCCInterfaceStatusValue Integer32,
|
|
lcsTLVConfStateCCInterfaceStatusLastRX DisplayString
|
|
}
|
|
|
|
lcsTLVConfStateIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsTLVConfStateEntry 1 }
|
|
|
|
lcsTLVConfStatePeerMEPID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peer MEP ID"
|
|
::= { lcsTLVConfStateEntry 2 }
|
|
|
|
lcsTLVConfStateCCOrganizationSpecificOUIFirst OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last received first value in the OUI field."
|
|
::= { lcsTLVConfStateEntry 3 }
|
|
|
|
lcsTLVConfStateCCOrganizationSpecificOUISecond OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last received second value in the OS TLV OUI field."
|
|
::= { lcsTLVConfStateEntry 4 }
|
|
|
|
lcsTLVConfStateCCOrganizationSpecificOUIThird OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last received third value in the OS TLV OUI field."
|
|
::= { lcsTLVConfStateEntry 5 }
|
|
|
|
lcsTLVConfStateCCOrganizationSpecificSubType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last received value in the OS TLV Sub-Type field."
|
|
::= { lcsTLVConfStateEntry 6 }
|
|
|
|
lcsTLVConfStateCCOrganizationSpecificValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last received value in the OS TLV Value field."
|
|
::= { lcsTLVConfStateEntry 7 }
|
|
|
|
lcsTLVConfStateCCOrganizationSpecificLastRX OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OS TLV was received in the last received CCM PDU."
|
|
::= { lcsTLVConfStateEntry 8 }
|
|
|
|
lcsTLVConfStateCCPortStatusValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last received value in the PS TLV Value field."
|
|
::= { lcsTLVConfStateEntry 9 }
|
|
|
|
lcsTLVConfStateCCPortStatusLastRX OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PS TLV was received in the last received CCM PDU."
|
|
::= { lcsTLVConfStateEntry 10 }
|
|
|
|
lcsTLVConfStateCCInterfaceStatusValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last received value in the IS TLV Value field."
|
|
::= { lcsTLVConfStateEntry 11 }
|
|
|
|
lcsTLVConfStateCCInterfaceStatusLastRX OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IS TLV was received in the last received CCM PDU."
|
|
::= { lcsTLVConfStateEntry 12 }
|
|
|
|
lcsLinkStateTracking OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= { lcsMEP 8 }
|
|
|
|
|
|
lcsFaultManagement OBJECT IDENTIFIER ::= { lcsMEP 9 }
|
|
|
|
lcsFaultMgmtLoopBackConfEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= { lcsFaultManagement 2 }
|
|
|
|
lcsFaultMgmtLoopBackConfDEI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= { lcsFaultManagement 3 }
|
|
|
|
lcsFaultMgmtLoopBackConfPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-7"
|
|
::= { lcsFaultManagement 4 }
|
|
|
|
lcsFaultMgmtLoopBackConfCast OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Unicast destination address
|
|
1:Multicast destination address"
|
|
::= { lcsFaultManagement 5 }
|
|
|
|
lcsFaultMgmtLoopBackConfPeerMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is only used if the 'Unicast MAC' is configured to all zero.
|
|
The LBM unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer."
|
|
::= { lcsFaultManagement 6 }
|
|
|
|
lcsFaultMgmtLoopBackConfUnicastMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is only used if NOT configured to all zero.
|
|
This will be used as the LBM PDU unicast MAC.
|
|
This is the only way to configure Loop Back to-wards a MIP. "
|
|
::= { lcsFaultManagement 7 }
|
|
|
|
lcsFaultMgmtLoopBackConfToSend OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LBM PDU to send in one loop test.
|
|
The value 0 indicate infinite transmission (test behaviour).
|
|
This is HW based LBM/LBR and Requires VOE."
|
|
::= { lcsFaultManagement 8 }
|
|
|
|
lcsFaultMgmtLoopBackConfSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LBM frame size."
|
|
::= { lcsFaultManagement 9 }
|
|
|
|
lcsFaultMgmtLoopBackConfInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval between transmitting LBM PDU."
|
|
::= { lcsFaultManagement 10 }
|
|
|
|
|
|
lcsFaultManagementState OBJECT IDENTIFIER ::= { lcsMEP 10 }
|
|
|
|
|
|
lcsFaultMgmtStateTransactionID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transaction id of the first LBM transmitted.
|
|
For each LBM transmitted the transaction id in the PDU is incremented."
|
|
::= { lcsFaultManagementState 1 }
|
|
|
|
|
|
lcsFaultMgmtStateTransmitted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LBM PDU transmitted."
|
|
::= { lcsFaultManagementState 2 }
|
|
|
|
|
|
lcsFaultMgmtStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSFaultMgmtStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsFaultManagementState 3 }
|
|
|
|
lcsFaultMgmtStateEntry OBJECT-TYPE
|
|
SYNTAX LCSFaultMgmtStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsFaultMgmtStateIndex }
|
|
::= { lcsFaultMgmtStateTable 1 }
|
|
|
|
LCSFaultMgmtStateEntry ::= SEQUENCE {
|
|
lcsFaultMgmtStateIndex Integer32,
|
|
lcsFaultMgmtStateReplyMAC DisplayString,
|
|
lcsFaultMgmtStateReceived Integer32,
|
|
lcsFaultMgmtStateOutOfOrder Integer32
|
|
}
|
|
|
|
lcsFaultMgmtStateIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsFaultMgmtStateEntry 1 }
|
|
|
|
lcsFaultMgmtStateReplyMAC OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC of the replying MEP/MIP.
|
|
In case of multi-cast LBM, replies can be received from all peer MEP in the group.
|
|
This MAC is not shown in case of 'To Send' == 0."
|
|
::= { lcsFaultMgmtStateEntry 2 }
|
|
|
|
lcsFaultMgmtStateReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LBR PDU received from this 'Reply MAC'."
|
|
::= { lcsFaultMgmtStateEntry 3 }
|
|
|
|
lcsFaultMgmtStateOutOfOrder OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LBR PDU received from this 'Reply MAC' with incorrect 'Transaction ID'."
|
|
::= { lcsFaultMgmtStateEntry 4 }
|
|
|
|
lcsFaultMgmtTestSignal OBJECT IDENTIFIER ::= { lcsMEP 11 }
|
|
|
|
lcsFaultMgmtTestSignalTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test Signal based on transmitting TST PDU can be enabled/disabled.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsFaultMgmtTestSignal 2 }
|
|
|
|
lcsFaultMgmtTestSignalRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test Signal based on transmitting TST PDU can be enabled/disabled.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsFaultMgmtTestSignal 3 }
|
|
|
|
lcsFaultMgmtTestSignalDEI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DEI to be inserted as PCP bits in TAG (if any).
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsFaultMgmtTestSignal 4 }
|
|
|
|
lcsFaultMgmtTestSignalPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority to be inserted as PCP bits in TAG (if any).
|
|
Range:0-7"
|
|
::= { lcsFaultMgmtTestSignal 5 }
|
|
|
|
lcsFaultMgmtTestSignalPeerMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TST frame destination MAC will be taken from the 'Unicast Peer MAC' configuration of this peer."
|
|
::= { lcsFaultMgmtTestSignal 6 }
|
|
|
|
lcsFaultMgmtTestSignalRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TST frame transmission bit rate - in Mega bits pr. second.
|
|
Limit is 400 Mbps. This is the bit rate of a standard frame without any encapsulation.
|
|
If 1 Mbps rate is selected in a EVC MEP, the added tag will give a higher bitrate on the wire."
|
|
::= { lcsFaultMgmtTestSignal 7 }
|
|
|
|
lcsFaultMgmtTestSignalSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TST frame size. This is entered as the wanted size (in bytes) of a un-tagged frame containing TST OAM PDU - including CRC (four bytes)."
|
|
::= { lcsFaultMgmtTestSignal 8 }
|
|
|
|
lcsFaultMgmtTestSignalPattern OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'empty' TST PDU has the size of 12 bytes.
|
|
In order to achieve the configured frame size a data TLV will be added with a pattern.
|
|
0:All Zero
|
|
1:All One
|
|
2:10101010"
|
|
::= { lcsFaultMgmtTestSignal 9 }
|
|
|
|
lcsFaultMgmtTestSignalSequenceNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:disable
|
|
1:enable"
|
|
::= { lcsFaultMgmtTestSignal 10 }
|
|
|
|
lcsFaultMgmtTestSignalState OBJECT IDENTIFIER ::= { lcsMEP 12 }
|
|
|
|
lcsFaultMgmtTestSignalStateTXFrameCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of transmitted TST frames since last 'Clear'."
|
|
::= { lcsFaultMgmtTestSignalState 2 }
|
|
|
|
lcsFaultMgmtTestSignalStateRXFrameCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received TST frames since last 'Clear'."
|
|
::= { lcsFaultMgmtTestSignalState 3 }
|
|
|
|
lcsFaultMgmtTestSignalStateRXRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current received TST frame bit rate in Kbps.
|
|
This is calculated on a 1 s. basis, starting when first TST frame is received after 'Clear'.
|
|
The frame size used for this calculation is the first received after 'Clear'"
|
|
::= { lcsFaultMgmtTestSignalState 4 }
|
|
|
|
lcsFaultMgmtTestSignalStateTestTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds passed since first TST frame received after last 'Clear'."
|
|
::= { lcsFaultMgmtTestSignalState 5 }
|
|
|
|
|
|
lcsFaultMgmtTestSignalStateClear OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will clear all Test Signal State.
|
|
Transmission of TST frame will be restarted.
|
|
Calculation of 'Rx frame count', 'RX rate' and 'Test time' will be started when receiving first TST frame."
|
|
::= { lcsFaultMgmtTestSignalState 6 }
|
|
|
|
|
|
lcsFaultMgmtClientConfigFlow OBJECT IDENTIFIER ::= { lcsMEP 13 }
|
|
|
|
lcsFaultMgmtClientConfigFlowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSFaultMgmtClientConfigFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsFaultMgmtClientConfigFlow 1 }
|
|
|
|
lcsFaultMgmtClientConfigFlowEntry OBJECT-TYPE
|
|
SYNTAX LCSFaultMgmtClientConfigFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsFaultMgmtClientConfigFlowIndex }
|
|
::= { lcsFaultMgmtClientConfigFlowTable 1 }
|
|
|
|
LCSFaultMgmtClientConfigFlowEntry ::= SEQUENCE {
|
|
lcsFaultMgmtClientConfigFlowIndex Integer32,
|
|
lcsFaultMgmtClientConfigFlowDomain Integer32,
|
|
lcsFaultMgmtClientConfigFlowInstance Integer32,
|
|
lcsFaultMgmtClientConfigFlowLevel Integer32,
|
|
lcsFaultMgmtClientConfigFlowAISprio Integer32,
|
|
lcsFaultMgmtClientConfigFlowLCKprio Integer32,
|
|
lcsFaultMgmtClientConfigFlowRowStatus RowStatus
|
|
}
|
|
|
|
lcsFaultMgmtClientConfigFlowIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsFaultMgmtClientConfigFlowEntry 1 }
|
|
|
|
lcsFaultMgmtClientConfigFlowDomain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The domain of the client layer flow.
|
|
Ranfew:0-6
|
|
0:Port
|
|
1:EVC
|
|
2:VLAN
|
|
3:MPLS_LINK
|
|
4:MPLS_TUNNEL
|
|
5:MPLS_PW
|
|
6:MPLS_LSP"
|
|
::= { lcsFaultMgmtClientConfigFlowEntry 2 }
|
|
|
|
lcsFaultMgmtClientConfigFlowInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Client layer flow instance numbers."
|
|
::= { lcsFaultMgmtClientConfigFlowEntry 3 }
|
|
|
|
lcsFaultMgmtClientConfigFlowLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Client layer level - AIS and LCK PDU transmitted in this client layer flow will be on this level."
|
|
::= { lcsFaultMgmtClientConfigFlowEntry 4 }
|
|
|
|
lcsFaultMgmtClientConfigFlowAISprio OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority to be used when transmitting AIS in each client flow.
|
|
Priority resulting in highest possible PCP can be selected.
|
|
Range:0-7. 255 indicate highest possible is requested"
|
|
::= { lcsFaultMgmtClientConfigFlowEntry 5 }
|
|
|
|
lcsFaultMgmtClientConfigFlowLCKprio OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority to be used when transmitting LCK in each client flow.
|
|
Priority resulting in highest possible PCP can be selected.
|
|
Range:0-7. 255 indicate highest possible is requested"
|
|
::= { lcsFaultMgmtClientConfigFlowEntry 6 }
|
|
|
|
lcsFaultMgmtClientConfigFlowRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FaultMgmtClientConfigFlow Row Status."
|
|
::= {lcsFaultMgmtClientConfigFlowEntry 7 }
|
|
|
|
|
|
lcsFaultMgmtAISLOCK OBJECT IDENTIFIER ::= { lcsMEP 14 }
|
|
|
|
lcsFaultMgmtAISEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Insertion of AIS signal (AIS PDU transmission) in client layer flows, can be enable/disabled.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsFaultMgmtAISLOCK 2 }
|
|
|
|
lcsFaultMgmtAISFrameRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selecting the frame rate of AIS PDU.
|
|
This is the inverse of transmission period as described in Y.1731.
|
|
1: 300 frames per second
|
|
2: 100 frames per second
|
|
3: 10 frames per second
|
|
4: 1 frames per second
|
|
5: 6 frames per minute
|
|
6: 1 frames per minute
|
|
7: 6 frames per hour"
|
|
::= { lcsFaultMgmtAISLOCK 3 }
|
|
|
|
lcsFaultMgmtAISProtection OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selecting this means that the first 3 AIS PDU is transmitted as fast as possible - in case of using this for protection in the end point.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsFaultMgmtAISLOCK 4 }
|
|
|
|
|
|
lcsFaultMgmtLOCKEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Insertion of LOCK signal (LCK PDU transmission) in client layer flows, can be enable/disabled.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsFaultMgmtAISLOCK 5 }
|
|
|
|
lcsFaultMgmtLOCKFrameRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selecting the frame rate of LCK PDU. This is the inverse of transmission period as described in Y.1731.
|
|
1: 300 frames per second
|
|
2: 100 frames per second
|
|
3: 10 frames per second
|
|
4: 1 frames per second
|
|
5: 6 frames per minute
|
|
6: 1 frames per minute
|
|
7: 6 frames per hour"
|
|
::= { lcsFaultMgmtAISLOCK 6 }
|
|
|
|
lcsPerformanceMonitor OBJECT IDENTIFIER ::= { lcsMEP 15 }
|
|
|
|
lcsDataSetEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
When enabled this MEP instance will contribute to the 'PM Data Set' gathered by the PM Session.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsPerformanceMonitor 2 }
|
|
|
|
lcsLossMeasurementEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Loss Measurement based on transmitting/receiving CCM or LMM/LMR PDU can be enabled/disabled - see 'Ended'.
|
|
This is only valid with one Peer MEP configured.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsPerformanceMonitor 3 }
|
|
|
|
lcsLossMeasurementPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The priority to be inserted as PCP bits in TAG (if any).
|
|
In case of enable of Continuity Check and Loss Measurement both implemented on SW based CCM, 'Priority' has to be the same.
|
|
range:0-7"
|
|
::= { lcsPerformanceMonitor 4 }
|
|
|
|
lcsLossMeasurementFrameRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1: 300 frames per second
|
|
2: 100 frames per second
|
|
3: 10 frames per second
|
|
4: 1 frames per second
|
|
5: 6 frames per minute
|
|
6: 1 frames per minute
|
|
7: 6 frames per hour"
|
|
::= { lcsPerformanceMonitor 5 }
|
|
|
|
lcsLossMeasurementCast OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
0: Unicast destination address
|
|
1: Multicast destination address
|
|
"
|
|
::= { lcsPerformanceMonitor 6 }
|
|
|
|
lcsLossMeasurementEnded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
0: Single ended LM based on LMM/LMR or DM based on DMM/DMR
|
|
1: Dual ended LM based on CCM or DM based on 1DM
|
|
"
|
|
::= { lcsPerformanceMonitor 7 }
|
|
|
|
lcsLossMeasurementFLRInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This is the interval in seconds where the Frame Loss Ratio is calculated.
|
|
"
|
|
::= { lcsPerformanceMonitor 8 }
|
|
|
|
lcsLossMeasurementLossThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Far end loss threshold count is incremented if a loss measurement is above this threshold.
|
|
"
|
|
::= { lcsPerformanceMonitor 9 }
|
|
|
|
lcsLossMeasurementStateTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { lcsPerformanceMonitor 10 }
|
|
|
|
lcsLossMeasurementStateRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { lcsPerformanceMonitor 11 }
|
|
|
|
lcsLossMeasurementStateNearEndLossCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated near end frame loss count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 12 }
|
|
|
|
lcsLossMeasurementStateFarEndLossCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated far end frame loss count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 13 }
|
|
|
|
lcsLossMeasurementStateNearEndLossRatio OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The near end frame loss ratio calculated based on the near end frame loss count and far end frame transmitted - in the latest 'FLR Interval'.
|
|
The result is given in percent.
|
|
"
|
|
::= { lcsPerformanceMonitor 14 }
|
|
|
|
lcsLossMeasurementStateFarEndLossRatio OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The far end frame loss ratio calculated based on the far end frame loss count and near end frame transmitted - in the latest 'FLR Interval'.
|
|
The result is given in percent.
|
|
"
|
|
::= { lcsPerformanceMonitor 15 }
|
|
|
|
lcsLossMeasurementStateClear OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of this check and save will clear the accumulated counters and restart ratio calculation.
|
|
"
|
|
::= { lcsPerformanceMonitor 16 }
|
|
|
|
lcsLossMeasurementAvailabilityEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable of loss measurement availability.
|
|
0:disable
|
|
1:enable
|
|
"
|
|
::= { lcsPerformanceMonitor 17 }
|
|
|
|
lcsLossMeasurementAvailabilityInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Availability interval - number of measurements with same availability in order to change availability state.
|
|
|
|
"
|
|
::= { lcsPerformanceMonitor 18 }
|
|
|
|
lcsLossMeasurementAvailabilityFLRThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Availability frame loss ratio threshold in per mille.
|
|
"
|
|
::= { lcsPerformanceMonitor 19 }
|
|
|
|
lcsLossMeasurementAvailabilityMaintenance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable of loss measurement availability maintenance.
|
|
"
|
|
::= { lcsPerformanceMonitor 20 }
|
|
|
|
|
|
lcsLossMeasurementAvailabilityStateNearAvailabilityCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end availability count.
|
|
"
|
|
::= { lcsPerformanceMonitor 21 }
|
|
|
|
lcsLossMeasurementAvailabilityStateFarAvailabilityCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end availability count.
|
|
"
|
|
::= { lcsPerformanceMonitor 22 }
|
|
|
|
lcsLossMeasurementAvailabilityStateNearUnavailabilityCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end unavailability count.
|
|
"
|
|
::= { lcsPerformanceMonitor 23 }
|
|
|
|
lcsLossMeasurementAvailabilityStateFarUnavailabilityCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end unavailability count.
|
|
"
|
|
::= { lcsPerformanceMonitor 24 }
|
|
|
|
lcsLossMeasurementAvailabilityStateNearState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end availability state.
|
|
"
|
|
::= { lcsPerformanceMonitor 25 }
|
|
|
|
lcsLossMeasurementAvailabilityStateFarState OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end availability state.
|
|
"
|
|
::= { lcsPerformanceMonitor 26 }
|
|
|
|
lcsLossMeasurementHighLossIntervalEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable of loss measurement high loss interval.
|
|
0:disable
|
|
1:enable
|
|
"
|
|
::= { lcsPerformanceMonitor 27 }
|
|
|
|
lcsLossMeasurementHighLossIntervalFLRThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Loss Interval frame loss ratio threshold in per mille.
|
|
"
|
|
::= { lcsPerformanceMonitor 28 }
|
|
|
|
lcsLossMeasurementHighLossIntervalConsecutiveInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Loss Interval consecutive interval (number of measurements).
|
|
"
|
|
::= { lcsPerformanceMonitor 29 }
|
|
|
|
lcsLossMeasurementHighLossIntervalStateNearCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold.
|
|
"
|
|
::= { lcsPerformanceMonitor 30 }
|
|
|
|
lcsLossMeasurementHighLossIntervalStateFarCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold.
|
|
"
|
|
::= { lcsPerformanceMonitor 31 }
|
|
|
|
lcsLossMeasurementHighLossIntervalStateNearConsecutiveCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Near end high loss interval consecutive count.
|
|
"
|
|
::= { lcsPerformanceMonitor 32 }
|
|
|
|
lcsLossMeasurementHighLossIntervalStateFarConsecutiveCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Far end high loss interval consecutive count.
|
|
"
|
|
::= { lcsPerformanceMonitor 33 }
|
|
|
|
lcsLossMeasurementSignalDegradeEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable of loss measurement signal degrade.
|
|
0:disable
|
|
1:enable
|
|
"
|
|
::= { lcsPerformanceMonitor 34 }
|
|
|
|
lcsLossMeasurementSignalDegradeTXMinimum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum number of frames that must be transmitted in a measurement before frame loss ratio is tested against loss ratio threshold.
|
|
|
|
"
|
|
::= { lcsPerformanceMonitor 35 }
|
|
|
|
lcsLossMeasurementSignalDegradeFLRThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal Degraded frame loss ratio threshold in per mille.
|
|
"
|
|
::= { lcsPerformanceMonitor 36 }
|
|
|
|
lcsLossMeasurementSignalDegradeBadThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of consecutive bad interval measurements required to set degrade state.
|
|
"
|
|
::= { lcsPerformanceMonitor 37 }
|
|
|
|
lcsLossMeasurementSignalDegradeGoodThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of consecutive good interval measurements required to clear degrade state.
|
|
"
|
|
::= { lcsPerformanceMonitor 38 }
|
|
|
|
lcsDelayMeasurementEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delay Measurement based on transmitting 1DM/DMM PDU can be enabled/disabled.
|
|
Delay Measurement based on receiving and handling 1DM/DMR PDU is always enabled.
|
|
0:disable
|
|
1:enable
|
|
"
|
|
::= { lcsPerformanceMonitor 39 }
|
|
|
|
lcsDelayMeasurementPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority to be inserted as PCP bits in TAG (if any).
|
|
Range:0-7
|
|
"
|
|
::= { lcsPerformanceMonitor 40 }
|
|
|
|
lcsDelayMeasurementCast OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selection of 1DM/DMM PDU transmitted unicast or multicast.
|
|
The unicast MAC will be configured through 'Peer MEP'.
|
|
0: Unicast destination address
|
|
1: Multicast destination address
|
|
"
|
|
::= { lcsPerformanceMonitor 41 }
|
|
|
|
lcsDelayMeasurementPeerMEP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is only used if the 'Cast' is configured to Uni.
|
|
The 1DM/DMR unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer.
|
|
"
|
|
::= { lcsPerformanceMonitor 42 }
|
|
|
|
lcsDelayMeasurementEnded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:One-Way: One-Way Delay Measurement implemented on 1DM.
|
|
1:Two-Way: Two-Way Delay Measurement implemented on DMM/DMR.
|
|
"
|
|
::= { lcsPerformanceMonitor 43 }
|
|
|
|
lcsDelayMeasurementTxMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Standardize: Y.1731 standardize way to transmit 1DM/DMR.
|
|
1:Proprietary: Vitesse proprietary way with follow-up packets to transmit 1DM/DMR.
|
|
"
|
|
::= { lcsPerformanceMonitor 44 }
|
|
|
|
lcsDelayMeasurementCalc OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is only used if the 'Way' is configured to Two-way.
|
|
0:Round trip: The frame delay calculated by the transmitting and receiving timestamps of initiators.
|
|
Frame Delay = RxTimeb-TxTimeStampf
|
|
1:Flow: The frame delay calculated by the transmitting and receiving timestamps of initiators and remotes.
|
|
Frame Delay = (RxTimeb-TxTimeStampf)-(TxTimeStampb-RxTimeStampf)
|
|
"
|
|
::= { lcsPerformanceMonitor 45 }
|
|
|
|
lcsDelayMeasurementGap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535.
|
|
"
|
|
::= { lcsPerformanceMonitor 46 }
|
|
|
|
lcsDelayMeasurementCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of last records to calculate. The range is 10 to 2000.
|
|
"
|
|
::= { lcsPerformanceMonitor 47 }
|
|
|
|
lcsDelayMeasurementUnit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time resolution.
|
|
0:us
|
|
1:ns
|
|
"
|
|
::= { lcsPerformanceMonitor 48 }
|
|
|
|
lcsDelayMeasurementD2forD1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable to use DMM/DMR packet to calculate one-way DM.
|
|
0:disable
|
|
1:enable
|
|
"
|
|
::= { lcsPerformanceMonitor 49 }
|
|
|
|
lcsDelayMeasurementCounterOverflowAction OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The action to counter when overflow happens.
|
|
0: Keep:When internal total delay counter overflow, DM is disabled automatically
|
|
1: Reset:When internal total delay counter overflow, counter is reset and DM continues running
|
|
"
|
|
::= { lcsPerformanceMonitor 50 }
|
|
|
|
lcsDelayMeasurementStateOnewayTx OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated transmit count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 51 }
|
|
|
|
lcsDelayMeasurementStateOnewayRx OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 52 }
|
|
|
|
lcsDelayMeasurementStateOnewayRxTimeout OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive timeout count for two-way only - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 53 }
|
|
|
|
lcsDelayMeasurementStateOnewayRxError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive error count - since last 'clear'.
|
|
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.
|
|
"
|
|
::= { lcsPerformanceMonitor 54 }
|
|
|
|
lcsDelayMeasurementStateOnewayAvDelayTot OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 55 }
|
|
|
|
lcsDelayMeasurementStateOnewayAvDelaylastN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 56 }
|
|
|
|
lcsDelayMeasurementStateOnewayDelayMin OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 57 }
|
|
|
|
lcsDelayMeasurementStateOnewayDelayMax OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 58 }
|
|
|
|
lcsDelayMeasurementStateOnewayAvDelayVarTot OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 59 }
|
|
|
|
lcsDelayMeasurementStateOnewayAvDelayVarlastN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay variation of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 60 }
|
|
|
|
lcsDelayMeasurementStateOnewayDelayVarMin OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 61 }
|
|
|
|
lcsDelayMeasurementStateOnewayDelayVarMax OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 62 }
|
|
|
|
lcsDelayMeasurementStateOnewayOverflow OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of counter overflow - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 63 }
|
|
|
|
lcsDelayMeasurementStateFtoNTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated transmit count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 64 }
|
|
|
|
lcsDelayMeasurementStateFtoNRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 65 }
|
|
|
|
lcsDelayMeasurementStateFtoNRxTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive timeout count for two-way only - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 66 }
|
|
|
|
lcsDelayMeasurementStateFtoNRxError OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive error count - since last 'clear'.
|
|
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.
|
|
"
|
|
::= { lcsPerformanceMonitor 67 }
|
|
|
|
lcsDelayMeasurementStateFtoNAvDelayTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 68 }
|
|
|
|
lcsDelayMeasurementStateFtoNAvDelaylastN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 69 }
|
|
|
|
lcsDelayMeasurementStateFtoNDelayMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 70 }
|
|
|
|
lcsDelayMeasurementStateFtoNDelayMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 71 }
|
|
|
|
lcsDelayMeasurementStateFtoNAvDelayVarTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 72 }
|
|
|
|
lcsDelayMeasurementStateFtoNAvDelayVarlastN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay variation of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 73 }
|
|
|
|
lcsDelayMeasurementStateFtoNDelayVarMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 74 }
|
|
|
|
lcsDelayMeasurementStateFtoNDelayVarMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 75 }
|
|
|
|
lcsDelayMeasurementStateFtoNOverflow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of counter overflow - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 76 }
|
|
|
|
lcsDelayMeasurementStateNtoFTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated transmit count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 77 }
|
|
|
|
lcsDelayMeasurementStateNtoFRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 78 }
|
|
|
|
lcsDelayMeasurementStateNtoFRxTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive timeout count for two-way only - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 79 }
|
|
|
|
lcsDelayMeasurementStateNtoFRxError OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive error count - since last 'clear'.
|
|
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.
|
|
"
|
|
::= { lcsPerformanceMonitor 80 }
|
|
|
|
lcsDelayMeasurementStateNtoFAvDelayTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 81 }
|
|
|
|
lcsDelayMeasurementStateNtoFAvDelaylastN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 82 }
|
|
|
|
lcsDelayMeasurementStateNtoFDelayMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 83 }
|
|
|
|
lcsDelayMeasurementStateNtoFDelayMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 84 }
|
|
|
|
lcsDelayMeasurementStateNtoFAvDelayVarTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 85 }
|
|
|
|
lcsDelayMeasurementStateNtoFAvDelayVarlastN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay variation of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 86 }
|
|
|
|
lcsDelayMeasurementStateNtoFDelayVarMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 87 }
|
|
|
|
lcsDelayMeasurementStateNtoFDelayVarMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 88 }
|
|
|
|
lcsDelayMeasurementStateNtoFOverflow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of counter overflow - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 89 }
|
|
|
|
lcsDelayMeasurementStateTwowayTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated transmit count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 90 }
|
|
|
|
lcsDelayMeasurementStateTwowayRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive count - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 91 }
|
|
|
|
lcsDelayMeasurementStateTwowayRxTimeout OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive timeout count for two-way only - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 92 }
|
|
|
|
lcsDelayMeasurementStateTwowayRxError OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated receive error count - since last 'clear'.
|
|
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.
|
|
"
|
|
::= { lcsPerformanceMonitor 93 }
|
|
|
|
lcsDelayMeasurementStateTwowayAvDelayTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 94 }
|
|
|
|
lcsDelayMeasurementStateTwowayAvDelaylastN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 95 }
|
|
|
|
lcsDelayMeasurementStateTwowayDelayMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 96 }
|
|
|
|
lcsDelayMeasurementStateTwowayDelayMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 97 }
|
|
|
|
lcsDelayMeasurementStateTwowayAvDelayVarTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average total delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 98 }
|
|
|
|
lcsDelayMeasurementStateTwowayAvDelayVarlastN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay variation of the last n packets - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 99 }
|
|
|
|
lcsDelayMeasurementStateTwowayDelayVarMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 100 }
|
|
|
|
lcsDelayMeasurementStateTwowayDelayVarMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay variation - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 101 }
|
|
|
|
lcsDelayMeasurementStateTwowayOverflow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of counter overflow - since last 'clear'.
|
|
"
|
|
::= { lcsPerformanceMonitor 102 }
|
|
|
|
lcsDelayMeasurementStateClear OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set of this check and save will clear the accumulated counters.
|
|
1:clear
|
|
"
|
|
::= { lcsPerformanceMonitor 103 }
|
|
|
|
lcsDelayMeasurementBinsMeasurementBinsforFD OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configurable number of Frame Delay Measurement Bins per Measurement Interval.
|
|
range: 2-10
|
|
"
|
|
::= { lcsPerformanceMonitor 104 }
|
|
|
|
lcsDelayMeasurementBinsMeasurementBinsforIFDV OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configurable number of Inter-Frame Delay Variation Measurement Bins per Measurement Interval.
|
|
range: 2-10
|
|
"
|
|
::= { lcsPerformanceMonitor 105 }
|
|
|
|
lcsDelayMeasurementBinsMeasurementThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configurable the Measurement Threshold for each Measurement Bin.
|
|
"
|
|
::= { lcsPerformanceMonitor 106 }
|
|
|
|
|
|
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPerformanceMonitorDelayMeasurementBinsforFDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMEP 16 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDEntry OBJECT-TYPE
|
|
SYNTAX LCSPerformanceMonitorDelayMeasurementBinsforFDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPerformanceMonitorDelayMeasurementBinsforFDIndex }
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforFDTable 1 }
|
|
|
|
LCSPerformanceMonitorDelayMeasurementBinsforFDEntry ::= SEQUENCE {
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDIndex Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDOneway Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDFtoN Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDNtoF Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDTwoway Integer32
|
|
|
|
}
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforFDEntry 1 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDOneway OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforFDEntry 2 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDFtoN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforFDEntry 3 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDNtoF OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforFDEntry 4 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforFDTwoway OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforFDEntry 5 }
|
|
|
|
|
|
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPerformanceMonitorDelayMeasurementBinsforIFDVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMEP 17 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry OBJECT-TYPE
|
|
SYNTAX LCSPerformanceMonitorDelayMeasurementBinsforIFDVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPerformanceMonitorDelayMeasurementBinsforIFDVIndex }
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforIFDVTable 1 }
|
|
|
|
LCSPerformanceMonitorDelayMeasurementBinsforIFDVEntry ::= SEQUENCE {
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVIndex Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVOneway Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVFtoN Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVNtoF Integer32,
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVTwoway Integer32
|
|
|
|
}
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry 1 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVOneway OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry 2 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVFtoN OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry 3 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVNtoF OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry 4 }
|
|
|
|
lcsPerformanceMonitorDelayMeasurementBinsforIFDVTwoway OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry 5 }
|
|
-- =============================================================================================================
|
|
lcsPTP OBJECT IDENTIFIER ::= { lcsConfiguration 28 }
|
|
|
|
lcsPTPExternalEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Selection box will allow you to configure the External Clock output.
|
|
The following values are possible:
|
|
1. True : Enable the external clock output
|
|
0. False : Disable the external clock output
|
|
"
|
|
::= { lcsPTP 1 }
|
|
|
|
lcsPTPAdjustMethod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Selection box will allow you to configure the Frequency adjustment configuration.
|
|
0: LTC frequency : Select Local Time Counter (LTC) frequency control
|
|
1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE
|
|
2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW
|
|
3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE)
|
|
"
|
|
::= { lcsPTP 2 }
|
|
|
|
lcsPTPClockFrequency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will allow to set the Clock Frequency.
|
|
The possible range of values are 1 - 25000000 (1 - 25MHz)
|
|
"
|
|
::= { lcsPTP 3 }
|
|
|
|
|
|
|
|
lcsPTPClockConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPTPClockConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of PTP Clock Conf."
|
|
::= { lcsPTP 5 }
|
|
|
|
lcsPTPClockConfEntry OBJECT-TYPE
|
|
SYNTAX LCSPTPClockConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the PTP Clock Conf table."
|
|
INDEX { lcsPTPClockConfIndex }
|
|
::= { lcsPTPClockConfTable 1 }
|
|
|
|
LCSPTPClockConfEntry ::=
|
|
SEQUENCE {
|
|
lcsPTPClockConfIndex Integer32,
|
|
lcsPTPClockConfClockInstance Integer32,
|
|
lcsPTPClockConfDeviceType Integer32,
|
|
lcsPTPClockConfProfile Integer32,
|
|
lcsPTPClockConfRowStatus RowStatus
|
|
}
|
|
|
|
lcsPTPClockConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PTP Clock Conf index."
|
|
::= {lcsPTPClockConfEntry 1 }
|
|
|
|
lcsPTPClockConfClockInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Instance of a particular Clock Instance [0..3]."
|
|
::= {lcsPTPClockConfEntry 2 }
|
|
|
|
lcsPTPClockConfDeviceType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Type of the Clock Instance. There are five Device Types.
|
|
0: Inactive - passive clock instance
|
|
1: Ord-Bound - clock's Device Type is Ordinary-Boundary Clock.
|
|
2: P2p Transp - clock's Device Type is Peer to Peer Transparent Clock.
|
|
3: E2e Transp - clock's Device Type is End to End Transparent Clock.
|
|
4: Master Only - clock's Device Type is Master Only.
|
|
5: Slave Only - clock's Device Type is Slave Only.
|
|
6: Boundary Clock frontend clock instance, only 1-step, 1-way is supported."
|
|
::= {lcsPTPClockConfEntry 3 }
|
|
|
|
lcsPTPClockConfProfile OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:No profile
|
|
1:1588
|
|
2:G8265.1
|
|
3:G8275.1
|
|
"
|
|
::= {lcsPTPClockConfEntry 4 }
|
|
|
|
lcsPTPClockConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PTP Clock Conf Row Status."
|
|
::= {lcsPTPClockConfEntry 5 }
|
|
|
|
lcsPTPClockInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the PTP clock instance for the following item used [0..3]."
|
|
::= {lcsPTP 6 }
|
|
|
|
|
|
lcsPTPClockConfAndStatus OBJECT IDENTIFIER ::= { lcsPTP 7 }
|
|
|
|
lcsPTPClockConfEntryClockInstance OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPTPClockConfAndStatus 2 }
|
|
|
|
lcsPTPClockConfEntryDeviceType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPTPClockConfAndStatus 3 }
|
|
|
|
lcsPTPClockConfEntryProfile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPTPClockConfAndStatus 4 }
|
|
|
|
lcsPTPClockConfEntryApplyProfileDefaults OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"-1:n/a
|
|
0:normal state
|
|
1:apply profile default"
|
|
::= {lcsPTPClockConfAndStatus 5 }
|
|
|
|
lcsPTPClockConfEntryPTPTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the actual PTP time with nanosecond resolution."
|
|
::= {lcsPTPClockConfAndStatus 6 }
|
|
|
|
lcsPTPClockConfEntryClockAdjustmentMethod OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the actual clock adjustment method. The method depends on the available hardware."
|
|
::= {lcsPTPClockConfAndStatus 7 }
|
|
|
|
lcsPTPClockConfEntrySynchronizeToSystemClock OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Activate this button to synchronize the System Clock to PTP Time.
|
|
1:Synchronize to system clock."
|
|
::= {lcsPTPClockConfAndStatus 8 }
|
|
|
|
lcsPTPClockConfEntryClockCurrentDataSetstpRm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Steps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock."
|
|
::= {lcsPTPClockConfAndStatus 9 }
|
|
|
|
lcsPTPClockConfEntryClockCurrentDataSetOffsetFromMaster OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time difference between the master clock and the local slave clock, measured in ns."
|
|
::= {lcsPTPClockConfAndStatus 10 }
|
|
|
|
lcsPTPClockConfEntryClockCurrentDataSetMeanPathDelay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean propagation time for the link between the master and the local slave."
|
|
::= {lcsPTPClockConfAndStatus 11 }
|
|
|
|
lcsPTPClockConfEntryClockCurrentDataSetSlavePort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows which port is in slave mode. The value is 0 if no ports are in slave mode."
|
|
::= {lcsPTPClockConfAndStatus 12 }
|
|
|
|
lcsPTPClockConfEntryClockCurrentDataSetSlaveState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows synchronization state of the slave."
|
|
::= {lcsPTPClockConfAndStatus 13 }
|
|
|
|
lcsPTPClockConfEntryClockCurrentDataSetHoldover OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"After the slave has been in Locked mode during the stabilization period,
|
|
this value shows the actual clock offset between the freerun and the actual holdover frequency,
|
|
the value is shown in parts pr billion (ppb).
|
|
During the stabilization period, the value is shown as N.A.
|
|
The stabilization period is 60 sec as default, it can be changed from the CLI interface."
|
|
::= {lcsPTPClockConfAndStatus 14 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetParentPortID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id."
|
|
::= {lcsPTPClockConfAndStatus 15 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Id for the parent master port"
|
|
::= {lcsPTPClockConfAndStatus 16 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetPStat OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Parents Stats (always false)."
|
|
::= {lcsPTPClockConfAndStatus 17 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetVar OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is observed parent offset scaled log variance"
|
|
::= {lcsPTPClockConfAndStatus 18 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master.
|
|
(unit = ns per s)."
|
|
::= {lcsPTPClockConfAndStatus 19 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetGrandMasterID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id."
|
|
::= {lcsPTPClockConfAndStatus 20 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetGrandMasterClockQuality OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock quality announced by the grand master (See description of Clock Default DataSet:Clock Quality)"
|
|
::= {lcsPTPClockConfAndStatus 21 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetPri1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clock priority 1 announced by the grand master"
|
|
::= {lcsPTPClockConfAndStatus 22 }
|
|
|
|
lcsPTPClockConfEntryClockParentDataSetPri2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clock priority 2 announced by the grand master."
|
|
::= {lcsPTPClockConfAndStatus 23 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetClockID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An internal instance id (0..3)"
|
|
::= {lcsPTPClockConfAndStatus 24 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetDeviceType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Type of the Clock Instance. There are five Device Types.
|
|
1. Ord-Bound - Clock's Device Type is Ordinary-Boundary Clock.
|
|
2. P2p Transp - Clock's Device Type is Peer to Peer Transparent Clock.
|
|
3. E2e Transp - Clock's Device Type is End to End Transparent Clock.
|
|
4. Master Only - Clock's Device Type is Master Only.
|
|
5. Slave Only - Clock's Device Type is Slave Only."
|
|
::= {lcsPTPClockConfAndStatus 25 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSet2StepFlag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True if two-step Sync events and Pdelay_Resp events are used
|
|
0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 26 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of physical ports in the node"
|
|
::= {lcsPTPClockConfAndStatus 27 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetClockIdentity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It shows unique clock identifier"
|
|
::= {lcsPTPClockConfAndStatus 28 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetDom OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clock domain [0..127]."
|
|
::= {lcsPTPClockConfAndStatus 29 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetClockQuality OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588.
|
|
The Clock Accuracy values are defined in IEEE1588 table 6 (Currently the clock Accuracy is set to 'Unknown' as default)."
|
|
::= {lcsPTPClockConfAndStatus 30 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetPri1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clock priority 1 [0..255] used by the BMC master select algorithm."
|
|
::= {lcsPTPClockConfAndStatus 31 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetPri2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clock priority 2 [0..255] used by the BMC master select algorithm."
|
|
::= {lcsPTPClockConfAndStatus 32 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetProtocol OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Ethernet
|
|
1:Ethernet Mixed
|
|
2:IP4Multi
|
|
3:IP4Mixed
|
|
4:IP4Uni
|
|
5:OAM"
|
|
::= {lcsPTPClockConfAndStatus 33 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetOneWay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, one way measurements are used.
|
|
This parameter applies only to a slave.
|
|
In one-way mode no delay measurements are performed, i.e. this is applicable only if frequency synchronization is needed.
|
|
The master always responds to delay requests.
|
|
0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 34 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetVLANTagEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN Tag Enable parameter is ignored, because the tagging is controlled by the VLAN configuration.
|
|
0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 35 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TVLAN Identifier used for tagging the VLAN packets.
|
|
range:1-4094"
|
|
::= {lcsPTPClockConfAndStatus 36 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetPCP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority Code Point value used for PTP frames. range:0-7"
|
|
::= {lcsPTPClockConfAndStatus 37 }
|
|
|
|
lcsPTPClockConfEntryClockDefaultDataSetDSCP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= {lcsPTPClockConfAndStatus 38 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetUtcOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 0-10000"
|
|
::= {lcsPTPClockConfAndStatus 39 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetValid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 40 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetLeap59 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 41 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetLeap61 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 42 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetTimeTrac OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 43 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetFreqTrac OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 44 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetPTPTimeScale OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 45 }
|
|
|
|
lcsPTPClockConfEntryClockTimePropertiesDataSetTimeSource OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range: 0-255"
|
|
::= {lcsPTPClockConfAndStatus 46 }
|
|
|
|
lcsPTPClockConfEntryFilterParametersFilterType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the filter type used which can be either the basic filter or an advanced filter that can be configured to use only a fraction of the packets received
|
|
(i.e. the packets that have experienced the least latency).
|
|
0:BASIC"
|
|
::= {lcsPTPClockConfAndStatus 47 }
|
|
|
|
lcsPTPClockConfEntryFilterParametersDelayFilter OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-6"
|
|
::= {lcsPTPClockConfAndStatus 48 }
|
|
|
|
lcsPTPClockConfEntryFilterParametersPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:1-10000"
|
|
::= {lcsPTPClockConfAndStatus 49 }
|
|
|
|
lcsPTPClockConfEntryFilterParametersDist OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:1-10"
|
|
::= {lcsPTPClockConfAndStatus 50 }
|
|
|
|
lcsPTPClockConfEntryServoParametersDisplay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal
|
|
0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 51 }
|
|
|
|
lcsPTPClockConfEntryServoParametersPEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true the P part of the algorithm is included
|
|
0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 52 }
|
|
|
|
lcsPTPClockConfEntryServoParametersIEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true the I part of the algorithm is included
|
|
0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 53 }
|
|
|
|
lcsPTPClockConfEntryServoParametersDEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true the D part of the algorithm is included
|
|
0:false
|
|
1:true"
|
|
::= {lcsPTPClockConfAndStatus 54 }
|
|
|
|
lcsPTPClockConfEntryServoParametersPConstant OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-1000"
|
|
::= {lcsPTPClockConfAndStatus 55 }
|
|
|
|
lcsPTPClockConfEntryServoParametersIConstant OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-10000"
|
|
::= {lcsPTPClockConfAndStatus 56 }
|
|
|
|
lcsPTPClockConfEntryServoParametersDConstant OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"range:0-1000"
|
|
::= {lcsPTPClockConfAndStatus 57 }
|
|
|
|
|
|
lcsPTPClockPortDataSetConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPTPClockPortDataSetConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPTP 8 }
|
|
|
|
lcsPTPClockPortDataSetConfEntry OBJECT-TYPE
|
|
SYNTAX LCSPTPClockPortDataSetConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPTPClockPortDataSetConfPort }
|
|
::= { lcsPTPClockPortDataSetConfTable 1 }
|
|
|
|
LCSPTPClockPortDataSetConfEntry ::= SEQUENCE {
|
|
lcsPTPClockPortDataSetConfPort Integer32,
|
|
lcsPTPClockConfEntryPortConfEnable Integer32,
|
|
lcsPTPClockConfEntryPortConfStat DisplayString,
|
|
lcsPTPClockConfEntryPortConfMDR Integer32,
|
|
lcsPTPClockConfEntryPortConfPeerMeanPathDel DisplayString,
|
|
lcsPTPClockConfEntryPortConfAnv Integer32,
|
|
lcsPTPClockConfEntryPortConfATo Integer32,
|
|
lcsPTPClockConfEntryPortConfSyv Integer32,
|
|
lcsPTPClockConfEntryPortConfDlm Integer32,
|
|
lcsPTPClockConfEntryPortConfMPR Integer32,
|
|
lcsPTPClockConfEntryPortConfDelayAsymmetry Integer32,
|
|
lcsPTPClockConfEntryPortConfIngressLatency Integer32,
|
|
lcsPTPClockConfEntryPortConfEgressLatency Integer32,
|
|
lcsPTPClockConfEntryPortConfVersion Integer32
|
|
}
|
|
|
|
lcsPTPClockPortDataSetConfPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsPTPClockPortDataSetConfEntry 1 }
|
|
|
|
lcsPTPClockConfEntryPortConfEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:false
|
|
1:true"
|
|
::= { lcsPTPClockPortDataSetConfEntry 2 }
|
|
|
|
lcsPTPClockConfEntryPortConfStat OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic member portState: Current state of the port."
|
|
::= { lcsPTPClockPortDataSetConfEntry 3 }
|
|
|
|
lcsPTPClockConfEntryPortConfMDR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic member log Min Delay Req Interval: The delay request interval announced by the master."
|
|
::= { lcsPTPClockPortDataSetConfEntry 4 }
|
|
|
|
lcsPTPClockConfEntryPortConfPeerMeanPathDel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path delay measured by the port in P2P mode. In E2E mode this value is 0"
|
|
::= { lcsPTPClockPortDataSetConfEntry 5 }
|
|
|
|
|
|
|
|
lcsPTPClockConfEntryPortConfAnv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval for issuing announce messages in master state. Range is -3 to 4."
|
|
::= { lcsPTPClockPortDataSetConfEntry 6 }
|
|
|
|
lcsPTPClockConfEntryPortConfATo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout for receiving announce messages on the port. Range is 1 to 10."
|
|
::= { lcsPTPClockPortDataSetConfEntry 7 }
|
|
|
|
lcsPTPClockConfEntryPortConfSyv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval for issuing sync messages in master. Range is -7 to 4."
|
|
::= { lcsPTPClockPortDataSetConfEntry 8 }
|
|
|
|
lcsPTPClockConfEntryPortConfDlm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configurable member delayMechanism: The delay mechanism used for the port:
|
|
e2e End to end delay measurement
|
|
p2p Peer to peer delay measurement.
|
|
Can be defined per port in an Ordinary/Boundary clock.
|
|
In a transparent clock all ports use the same delay mechanism, determined by the clock type.
|
|
1:e2e
|
|
2:p2p"
|
|
::= { lcsPTPClockPortDataSetConfEntry 9 }
|
|
|
|
lcsPTPClockConfEntryPortConfMPR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval for issuing Delay_Req messages for the port in E2e mode. This value is announced from the master to the slave in an announce message. The value is reflected in the MDR field in the Slave
|
|
The interval for issuing Pdelay_Req messages for the port in P2P mode
|
|
Note: The interpretation of this parameter has changed from release 2.40. In earlier versions the value was interpreted relative to the Sync interval, this was a violation of the standard, so now the value is interpreted as an interval. I.e. MPR = 0 => 1 Delay_Req pr sec, independent of the Sync rate.
|
|
Range is -7 to 5."
|
|
::= { lcsPTPClockPortDataSetConfEntry 10 }
|
|
|
|
lcsPTPClockConfEntryPortConfDelayAsymmetry OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the transmission delay for a link in not symmetric, the asymmetry can be configured here, see IEEE 1588 Section 7.4.2 Communication path asymmetry
|
|
Range is -100000 to 100000."
|
|
::= { lcsPTPClockPortDataSetConfEntry 11 }
|
|
|
|
lcsPTPClockConfEntryPortConfIngressLatency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2.
|
|
Range is -100000 to 100000."
|
|
::= { lcsPTPClockPortDataSetConfEntry 12 }
|
|
|
|
lcsPTPClockConfEntryPortConfEgressLatency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2.
|
|
Range is -100000 to 100000."
|
|
::= { lcsPTPClockPortDataSetConfEntry 13 }
|
|
|
|
lcsPTPClockConfEntryPortConfVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current implementation only supports PTP version 2"
|
|
::= { lcsPTPClockPortDataSetConfEntry 14 }
|
|
|
|
|
|
lcsPTPClockUnicastSlaveConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPTPClockUnicastSlaveConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPTP 9 }
|
|
|
|
lcsPTPClockUnicastSlaveConfEntry OBJECT-TYPE
|
|
SYNTAX LCSPTPClockUnicastSlaveConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPTPClockConfEntryUnicastSlaveConfIndex }
|
|
::= { lcsPTPClockUnicastSlaveConfTable 1 }
|
|
|
|
LCSPTPClockUnicastSlaveConfEntry ::= SEQUENCE {
|
|
lcsPTPClockConfEntryUnicastSlaveConfIndex Integer32,
|
|
lcsPTPClockConfEntryUnicastSlaveConfDuration Integer32,
|
|
lcsPTPClockConfEntryUnicastSlaveConfIPAddress IpAddress,
|
|
lcsPTPClockConfEntryUnicastSlaveConfGrant Integer32,
|
|
lcsPTPClockConfEntryUnicastSlaveConfCommState DisplayString
|
|
}
|
|
|
|
lcsPTPClockConfEntryUnicastSlaveConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsPTPClockUnicastSlaveConfEntry 1 }
|
|
|
|
lcsPTPClockConfEntryUnicastSlaveConfDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds a master is requested to send Announce/Sync messages.
|
|
The request is repeated from the slave each Duration/4 seconds.
|
|
range:10-1000"
|
|
::= { lcsPTPClockUnicastSlaveConfEntry 2 }
|
|
|
|
lcsPTPClockConfEntryUnicastSlaveConfIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 Address of the Master clock"
|
|
::= { lcsPTPClockUnicastSlaveConfEntry 3 }
|
|
|
|
lcsPTPClockConfEntryUnicastSlaveConfGrant OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The granted repetition period for the sync message"
|
|
::= { lcsPTPClockUnicastSlaveConfEntry 4 }
|
|
|
|
lcsPTPClockConfEntryUnicastSlaveConfCommState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the communication with the master, possible values are:
|
|
IDLE : The entry is not in use.
|
|
INIT : Announce is sent to the master (Waiting for a response).
|
|
CONN : The master has responded.
|
|
SELL : The assigned master is selected as current master.
|
|
SYNC : The master is sending Sync messages."
|
|
::= { lcsPTPClockUnicastSlaveConfEntry 5 }
|
|
-- =======================================================================================================================
|
|
lcsETHLINKOAM OBJECT IDENTIFIER ::= { lcsConfiguration 29 }
|
|
|
|
lcsEthLinkOAMPortConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSEthLinkOAMPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsETHLINKOAM 1 }
|
|
|
|
lcsEthLinkOAMPortConfEntry OBJECT-TYPE
|
|
SYNTAX LCSEthLinkOAMPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsEthLinkOAMPortConfIndex }
|
|
::= { lcsEthLinkOAMPortConfTable 1 }
|
|
|
|
LCSEthLinkOAMPortConfEntry ::= SEQUENCE {
|
|
lcsEthLinkOAMPortConfIndex Integer32,
|
|
lcsEthLinkOAMPortConfOAMEnable Integer32,
|
|
lcsEthLinkOAMPortConfOAMMode Integer32,
|
|
lcsEthLinkOAMPortConfLoopbackSupport Integer32,
|
|
lcsEthLinkOAMPortConfLinkMonitorSupport Integer32,
|
|
lcsEthLinkOAMPortConfMIBRetrievalSupport Integer32,
|
|
lcsEthLinkOAMPortConfLoopbackOperation Integer32
|
|
}
|
|
|
|
lcsEthLinkOAMPortConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsEthLinkOAMPortConfEntry 1 }
|
|
|
|
lcsEthLinkOAMPortConfOAMEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether Link OAM is enabled on this switch port.
|
|
Enabling Link OAM provides the network operators the ability to monitor the health of the network and
|
|
quickly determine the location of failing links or fault conditions.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsEthLinkOAMPortConfEntry 2 }
|
|
|
|
lcsEthLinkOAMPortConfOAMMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the OAM Mode as Active or Passive. The default mode is Passive.
|
|
0:Passive mode
|
|
1:Active mode"
|
|
::= { lcsEthLinkOAMPortConfEntry 3 }
|
|
|
|
lcsEthLinkOAMPortConfLoopbackSupport OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the loopback support is enabled for the switch port.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsEthLinkOAMPortConfEntry 4 }
|
|
|
|
lcsEthLinkOAMPortConfLinkMonitorSupport OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the Link Monitor support is enabled for the switch port.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsEthLinkOAMPortConfEntry 5 }
|
|
|
|
lcsEthLinkOAMPortConfMIBRetrievalSupport OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether the MIB Retrieval Support is enabled for the switch port.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsEthLinkOAMPortConfEntry 6 }
|
|
|
|
lcsEthLinkOAMPortConfLoopbackOperation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the Loopback support is enabled, enabling this field will start a loopback operation for the port.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsEthLinkOAMPortConfEntry 7 }
|
|
|
|
|
|
|
|
lcsEthLinkOAMPortDetailStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSEthLinkOAMPortDetailStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Detail Status table"
|
|
::= { lcsETHLINKOAM 2 }
|
|
|
|
lcsEthLinkOAMPortDetailStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSEthLinkOAMPortDetailStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Detail Status entry"
|
|
INDEX { lcsEthLinkOAMPortDetailStatusIndex }
|
|
::= { lcsEthLinkOAMPortDetailStatusTable 1 }
|
|
|
|
LCSEthLinkOAMPortDetailStatusEntry ::= SEQUENCE {
|
|
lcsEthLinkOAMPortDetailStatusIndex Integer32,
|
|
lcsEthLinkOAMPortPDUPermission DisplayString,
|
|
lcsEthLinkOAMPortDiscoveryState DisplayString,
|
|
lcsEthLinkOAMPortPeerMACAddress DisplayString,
|
|
lcsEthLinkOAMPortLocalMode DisplayString,
|
|
lcsEthLinkOAMPortLocalUnidirectionalOperationSupport DisplayString,
|
|
lcsEthLinkOAMPortLocalRemoteLoopbackSupport DisplayString,
|
|
lcsEthLinkOAMPortLocalLinkMonitoringSupport DisplayString,
|
|
lcsEthLinkOAMPortLocalMIBRetrievalSupport DisplayString,
|
|
lcsEthLinkOAMPortLocalMTUSize Integer32,
|
|
lcsEthLinkOAMPortLocalMultiplexerState DisplayString,
|
|
lcsEthLinkOAMPortLocalParserState DisplayString,
|
|
lcsEthLinkOAMPortLocalOrganizationalUniqueIdentification DisplayString,
|
|
lcsEthLinkOAMPortLocalPDURevision Integer32,
|
|
lcsEthLinkOAMPortPeerMode DisplayString,
|
|
lcsEthLinkOAMPortPeerUnidirectionalOperationSupport DisplayString,
|
|
lcsEthLinkOAMPortPeerRemoteLoopbackSupport DisplayString,
|
|
lcsEthLinkOAMPortPeerLinkMonitoringSupport DisplayString,
|
|
lcsEthLinkOAMPortPeerMIBRetrievalSupport DisplayString,
|
|
lcsEthLinkOAMPortPeerMTUSize DisplayString,
|
|
lcsEthLinkOAMPortPeerMultiplexerState DisplayString,
|
|
lcsEthLinkOAMPortPeerParserState DisplayString,
|
|
lcsEthLinkOAMPortPeerOrganizationalUniqueIdentification DisplayString,
|
|
lcsEthLinkOAMPortPDURevision DisplayString
|
|
}
|
|
|
|
lcsEthLinkOAMPortDetailStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 1 }
|
|
|
|
lcsEthLinkOAMPortPDUPermission OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is available only for the Local DTE.
|
|
It displays the current permission rules set for the local DTE.
|
|
Possible values are Link fault, Receive only, Information exchange only, ANY."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 2 }
|
|
|
|
lcsEthLinkOAMPortDiscoveryState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the current state of the discovery process.
|
|
Possible states are Fault state, Active state, Passive state,
|
|
SEND_LOCAL_REMOTE_STATE, SEND_LOCAL_REMOTE_OK_STATE, SEND_ANY_STATE."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 3 }
|
|
|
|
lcsEthLinkOAMPortPeerMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 4 }
|
|
|
|
lcsEthLinkOAMPortLocalMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mode in which the Link OAM is operating, Active or Passive."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 5 }
|
|
|
|
lcsEthLinkOAMPortLocalUnidirectionalOperationSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 6 }
|
|
|
|
lcsEthLinkOAMPortLocalRemoteLoopbackSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If status is enabled, DTE is capable of OAM remote loopback mode."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 7 }
|
|
|
|
lcsEthLinkOAMPortLocalLinkMonitoringSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If status is enabled, DTE supports interpreting Link Events."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 8 }
|
|
|
|
lcsEthLinkOAMPortLocalMIBRetrievalSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If status ie enabled DTE supports sending Variable Response OAMPDUs."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 9 }
|
|
|
|
lcsEthLinkOAMPortLocalMTUSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It represents the largest OAMPDU, in octets, supported by the DTE.
|
|
This value is compared to the remotes Maximum PDU Size and the smaller of the two is used."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 10 }
|
|
|
|
lcsEthLinkOAMPortLocalMultiplexerState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer.
|
|
Incase of discarding, the device discards all the non-OAMPDU's."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 11 }
|
|
|
|
lcsEthLinkOAMPortLocalParserState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer.
|
|
When in loopback, Device is looping back non-OAMPDUs to the lower sublayer.
|
|
When in discarding state, Device is discarding non-OAMPDUs."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 12 }
|
|
|
|
lcsEthLinkOAMPortLocalOrganizationalUniqueIdentification OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"24-bit Organizationally Unique Identifier of the vendor."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 13 }
|
|
|
|
lcsEthLinkOAMPortLocalPDURevision OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates the current revision of the Information TLV.
|
|
The value of this field shall start at zero and be incremented each time something in the Information TLV changes.
|
|
Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed
|
|
(an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed)."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 14 }
|
|
|
|
lcsEthLinkOAMPortPeerMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mode in which the Link OAM is operating, Active or Passive."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 15 }
|
|
|
|
lcsEthLinkOAMPortPeerUnidirectionalOperationSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This feature is not available to be configured by the user.
|
|
The status of this configuration is retrieved from the PHY."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 16 }
|
|
|
|
lcsEthLinkOAMPortPeerRemoteLoopbackSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If status is enabled, DTE is capable of OAM remote loopback mode."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 17 }
|
|
|
|
lcsEthLinkOAMPortPeerLinkMonitoringSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If status is enabled, DTE supports interpreting Link Events."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 18 }
|
|
|
|
lcsEthLinkOAMPortPeerMIBRetrievalSupport OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If status ie enabled DTE supports sending Variable Response OAMPDUs."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 19 }
|
|
|
|
lcsEthLinkOAMPortPeerMTUSize OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It represents the largest OAMPDU, in octets, supported by the DTE.
|
|
This value is compared to the remotes Maximum PDU Size and the smaller of the two is used."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 20 }
|
|
|
|
lcsEthLinkOAMPortPeerMultiplexerState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer.
|
|
Incase of discarding, the device discards all the non-OAMPDU's."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 21 }
|
|
|
|
lcsEthLinkOAMPortPeerParserState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer.
|
|
When in loopback, Device is looping back non-OAMPDUs to the lower sublayer.
|
|
When in discarding state, Device is discarding non-OAMPDUs."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 22 }
|
|
|
|
lcsEthLinkOAMPortPeerOrganizationalUniqueIdentification OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"24-bit Organizationally Unique Identifier of the vendor."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 23 }
|
|
|
|
lcsEthLinkOAMPortPDURevision OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates the current revision of the Information TLV.
|
|
The value of this field shall start at zero and be incremented each time something in the Information TLV changes.
|
|
Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed
|
|
(an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed)."
|
|
::= { lcsEthLinkOAMPortDetailStatusEntry 24 }
|
|
|
|
|
|
lcsEthLinkOAMPortLinkEventConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSEthLinkOAMPortLinkEventConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Link Event Conf Table"
|
|
::= { lcsETHLINKOAM 3 }
|
|
|
|
lcsEthLinkOAMPortLinkEventConfEntry OBJECT-TYPE
|
|
SYNTAX LCSEthLinkOAMPortLinkEventConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Link Event Conf Entry"
|
|
INDEX { lcsPortLinkEventConfIndex }
|
|
::= { lcsEthLinkOAMPortLinkEventConfTable 1 }
|
|
|
|
LCSEthLinkOAMPortLinkEventConfEntry ::= SEQUENCE {
|
|
lcsPortLinkEventConfIndex Integer32,
|
|
lcsPortLinkEventConfErrorFrameEventErrorWindow Integer32,
|
|
lcsPortLinkEventConfErrorFrameEventErrorThreshold Integer32,
|
|
lcsPortLinkEventConfSymbolPeriodErrorEventErrorWindow Integer32,
|
|
lcsPortLinkEventConfSymbolPeriodErrorEventErrorThreshold Integer32,
|
|
lcsPortLinkEventConfSecondsSummaryEventErrorWindow Integer32,
|
|
lcsPortLinkEventConfSecondsSummaryEventErrorThreshold Integer32
|
|
}
|
|
|
|
lcsPortLinkEventConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsEthLinkOAMPortLinkEventConfEntry 1 }
|
|
|
|
lcsPortLinkEventConfErrorFrameEventErrorWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Errored Frame Event counts the number of errored frames detected during the specified period.
|
|
Represents the window period in the order of 1 sec for the observation of various link events.
|
|
range: 1-60"
|
|
::= { lcsEthLinkOAMPortLinkEventConfEntry 2 }
|
|
|
|
lcsPortLinkEventConfErrorFrameEventErrorThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Errored Frame Event counts the number of errored frames detected during the specified period.
|
|
Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error.
|
|
range:0-0xffffffff"
|
|
::= { lcsEthLinkOAMPortLinkEventConfEntry 3 }
|
|
|
|
lcsPortLinkEventConfSymbolPeriodErrorEventErrorWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period.
|
|
Represents the window period in the order of 1 sec for the observation of various link events.
|
|
range: 1-60"
|
|
::= { lcsEthLinkOAMPortLinkEventConfEntry 4 }
|
|
|
|
lcsPortLinkEventConfSymbolPeriodErrorEventErrorThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period.
|
|
Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error.
|
|
range:0-0xffffffff"
|
|
::= { lcsEthLinkOAMPortLinkEventConfEntry 5 }
|
|
|
|
lcsPortLinkEventConfSecondsSummaryEventErrorWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period.
|
|
Represents the window period in the order of 1 sec for the observation of various link events.
|
|
range: 10-900"
|
|
::= { lcsEthLinkOAMPortLinkEventConfEntry 6 }
|
|
|
|
lcsPortLinkEventConfSecondsSummaryEventErrorThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period.
|
|
Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error.
|
|
range:0-0xffff"
|
|
::= { lcsEthLinkOAMPortLinkEventConfEntry 7 }
|
|
|
|
|
|
|
|
|
|
lcsEthLinkOAMPortDetailedStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSEthLinkOAMPortDetailedStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Detailed Statistics Table"
|
|
::= { lcsETHLINKOAM 4 }
|
|
|
|
lcsEthLinkOAMPortDetailedStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LCSEthLinkOAMPortDetailedStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Detailed Statistics Entry"
|
|
INDEX { lcsPortDetailedStatisticsIndex }
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsTable 1 }
|
|
|
|
LCSEthLinkOAMPortDetailedStatisticsEntry ::= SEQUENCE {
|
|
lcsPortDetailedStatisticsIndex Integer32,
|
|
lcsPortDetailedStatisticsRxOAMInformationPDUs Integer32,
|
|
lcsPortDetailedStatisticsRxUniqueErrorEventNotification Integer32,
|
|
lcsPortDetailedStatisticsRxDuplicateErrorEventNotification Integer32,
|
|
lcsPortDetailedStatisticsRxLoopbackControl Integer32,
|
|
lcsPortDetailedStatisticsRxVariableRequest Integer32,
|
|
lcsPortDetailedStatisticsRxVariableResponse Integer32,
|
|
lcsPortDetailedStatisticsRxOrgSpecificPDUs Integer32,
|
|
lcsPortDetailedStatisticsRxUnsupportedCodes Integer32,
|
|
lcsPortDetailedStatisticsRxLinkFaultPDUs Integer32,
|
|
lcsPortDetailedStatisticsRxDyingGasp Integer32,
|
|
lcsPortDetailedStatisticsRxCriticalEventPDUs Integer32,
|
|
lcsPortDetailedStatisticsTxOAMInformationPDUs Integer32,
|
|
lcsPortDetailedStatisticsTxUniqueErrorEventNotification Integer32,
|
|
lcsPortDetailedStatisticsTxDuplicateErrorEventNotification Integer32,
|
|
lcsPortDetailedStatisticsTxLoopbackControl Integer32,
|
|
lcsPortDetailedStatisticsTxVariableRequest Integer32,
|
|
lcsPortDetailedStatisticsTxVariableResponse Integer32,
|
|
lcsPortDetailedStatisticsTxOrgSpecificPDUs Integer32,
|
|
lcsPortDetailedStatisticsTxUnsupportedCodes Integer32,
|
|
lcsPortDetailedStatisticsTxLinkFaultPDUs Integer32,
|
|
lcsPortDetailedStatisticsTxDyingGasp Integer32,
|
|
lcsPortDetailedStatisticsTxCriticalEventPDUs Integer32,
|
|
lcsPortDetailedStatisticsClear Integer32
|
|
}
|
|
|
|
lcsPortDetailedStatisticsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 1 }
|
|
|
|
lcsPortDetailedStatisticsRxOAMInformationPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received and transmitted OAM Information PDU's.
|
|
Discontinuities of this counter can occur at re-initialization of the management system."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 2 }
|
|
|
|
lcsPortDetailedStatisticsRxUniqueErrorEventNotification OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of unique Event OAMPDUs received and transmitted on this interface.
|
|
Event Notifications may be sent in duplicate to increase the probability of successfully being received,
|
|
given the possibility that a frame may be lost in transit.
|
|
Duplicate Event Notification transmissions are counted by
|
|
Duplicate Event Notification counters for Tx and Rx respectively.
|
|
A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
|
|
a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 3 }
|
|
|
|
lcsPortDetailedStatisticsRxDuplicateErrorEventNotification OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of duplicate Event OAMPDUs received and transmitted on this interface.
|
|
Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received,
|
|
given the possibility that a frame may be lost in transit.
|
|
A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
|
|
a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 4 }
|
|
|
|
lcsPortDetailedStatisticsRxLoopbackControl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Loopback Control OAMPDUs received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 5 }
|
|
|
|
lcsPortDetailedStatisticsRxVariableRequest OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Variable Request OAMPDUs received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 6 }
|
|
|
|
lcsPortDetailedStatisticsRxVariableResponse OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Variable Response OAMPDUs received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 7 }
|
|
|
|
lcsPortDetailedStatisticsRxOrgSpecificPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Organization Specific OAMPDUs transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 8 }
|
|
|
|
lcsPortDetailedStatisticsRxUnsupportedCodes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 9 }
|
|
|
|
lcsPortDetailedStatisticsRxLinkFaultPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Link fault PDU's received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 10 }
|
|
|
|
lcsPortDetailedStatisticsRxDyingGasp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Dying Gasp events received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 11 }
|
|
|
|
lcsPortDetailedStatisticsRxCriticalEventPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Critical event PDU's received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 12 }
|
|
|
|
lcsPortDetailedStatisticsTxOAMInformationPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received and transmitted OAM Information PDU's.
|
|
Discontinuities of this counter can occur at re-initialization of the management system."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 13 }
|
|
|
|
lcsPortDetailedStatisticsTxUniqueErrorEventNotification OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of unique Event OAMPDUs received and transmitted on this interface.
|
|
Event Notifications may be sent in duplicate to increase the probability of successfully being received,
|
|
given the possibility that a frame may be lost in transit.
|
|
Duplicate Event Notification transmissions are counted by
|
|
Duplicate Event Notification counters for Tx and Rx respectively.
|
|
A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
|
|
a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 14 }
|
|
|
|
lcsPortDetailedStatisticsTxDuplicateErrorEventNotification OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of duplicate Event OAMPDUs received and transmitted on this interface.
|
|
Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received,
|
|
given the possibility that a frame may be lost in transit.
|
|
A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
|
|
a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 15 }
|
|
|
|
lcsPortDetailedStatisticsTxLoopbackControl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Loopback Control OAMPDUs received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 16 }
|
|
|
|
lcsPortDetailedStatisticsTxVariableRequest OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Variable Request OAMPDUs received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 17 }
|
|
|
|
lcsPortDetailedStatisticsTxVariableResponse OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Variable Response OAMPDUs received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 18 }
|
|
|
|
lcsPortDetailedStatisticsTxOrgSpecificPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Organization Specific OAMPDUs transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 19 }
|
|
|
|
lcsPortDetailedStatisticsTxUnsupportedCodes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 20 }
|
|
|
|
lcsPortDetailedStatisticsTxLinkFaultPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Link fault PDU's received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 21 }
|
|
|
|
lcsPortDetailedStatisticsTxDyingGasp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Dying Gasp events received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 22 }
|
|
|
|
lcsPortDetailedStatisticsTxCriticalEventPDUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of Critical event PDU's received and transmitted on this interface."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 23 }
|
|
|
|
lcsPortDetailedStatisticsClear OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears the counters for the selected port."
|
|
::= { lcsEthLinkOAMPortDetailedStatisticsEntry 24 }
|
|
|
|
|
|
lcsEthLinkOAMPortEventDetailedStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSEthLinkOAMPortEventDetailedStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Event Detailed Statistics Table"
|
|
::= { lcsETHLINKOAM 5 }
|
|
|
|
lcsEthLinkOAMPortEventDetailedStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LCSEthLinkOAMPortEventDetailedStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Eth Link OAM Port Event Detailed Statistics Entry"
|
|
INDEX { lcsDetailedStatisticsIndex }
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsTable 1 }
|
|
|
|
LCSEthLinkOAMPortEventDetailedStatisticsEntry ::= SEQUENCE {
|
|
lcsDetailedStatisticsIndex Integer32,
|
|
lcsDetailedStatisticsLocalSequenceNumber Integer32,
|
|
lcsDetailedStatisticsLocalFrameErrorEventTimestamp Integer32,
|
|
lcsDetailedStatisticsLocalFrameErrorEventWindow Integer32,
|
|
lcsDetailedStatisticsLocalFrameErrorEventThreshold Integer32,
|
|
lcsDetailedStatisticsLocalFrameErrors Integer32,
|
|
lcsDetailedStatisticsLocalTotalFrameErrors Counter64,
|
|
lcsDetailedStatisticsLocalTotalFrameErrorEvents Integer32,
|
|
lcsDetailedStatisticsLocalFramePeriodErrorEventTimestamp Integer32,
|
|
lcsDetailedStatisticsLocalFramePeriodErrorEventWindow Integer32,
|
|
lcsDetailedStatisticsLocalFramePeriodErrorEventThreshold Integer32,
|
|
lcsDetailedStatisticsLocalFramePeriodErrors Integer32,
|
|
lcsDetailedStatisticsLocalTotalFramePeriodErrors Counter64,
|
|
lcsDetailedStatisticsLocalTotalFramePeriodErrorEvents Integer32,
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrorEventTimestamp Integer32,
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrorEventWindow Counter64,
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrorEventThreshold Counter64,
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrors Counter64,
|
|
lcsDetailedStatisticsLocalSymbolFramePeriodErrors Counter64,
|
|
lcsDetailedStatisticsLocalSymbolFramePeriodErrorEvents Integer32,
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryTimeStamp Integer32,
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryWindow Integer32,
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryThreshold Integer32,
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryEvents Integer32,
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryErrorTotal Integer32,
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryEventTotal Integer32,
|
|
lcsDetailedStatisticsRemoteFrameErrorEventTimestamp Integer32,
|
|
lcsDetailedStatisticsRemoteFrameErrorEventWindow Integer32,
|
|
lcsDetailedStatisticsRemoteFrameErrorEventThreshold Integer32,
|
|
lcsDetailedStatisticsRemoteFrameErrors Integer32,
|
|
lcsDetailedStatisticsRemoteTotalFrameErrors Counter64,
|
|
lcsDetailedStatisticsRemoteTotalFrameErrorEvents Integer32,
|
|
lcsDetailedStatisticsRemoteFramePeriodErrorEventTimestamp Integer32,
|
|
lcsDetailedStatisticsRemoteFramePeriodErrorEventWindow Integer32,
|
|
lcsDetailedStatisticsRemoteFramePeriodErrorEventThreshold Integer32,
|
|
lcsDetailedStatisticsRemoteFramePeriodErrors Integer32,
|
|
lcsDetailedStatisticsRemoteTotalFramePeriodErrors Counter64,
|
|
lcsDetailedStatisticsRemoteTotalFramePeriodErrorEvents Integer32,
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventTimestamp Integer32,
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventWindow Counter64,
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventThreshold Counter64,
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrors Counter64,
|
|
lcsDetailedStatisticsRemoteSymbolFramePeriodErrors Counter64,
|
|
lcsDetailedStatisticsRemoteSymbolFramePeriodErrorEvents Integer32,
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryTimeStamp Integer32,
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryWindow Integer32,
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryThreshold Integer32,
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryEvents Integer32,
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryErrorTotal Integer32,
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryEventTotal Integer32
|
|
}
|
|
|
|
lcsDetailedStatisticsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 1 }
|
|
|
|
lcsDetailedStatisticsLocalSequenceNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the total number of events occurred at the remote end."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 2 }
|
|
|
|
lcsDetailedStatisticsLocalFrameErrorEventTimestamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 3 }
|
|
|
|
lcsDetailedStatisticsLocalFrameErrorEventWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1)
|
|
The default value is one second. 2) The lower bound is one second. 3)
|
|
The upper bound is one minute."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 4 }
|
|
|
|
lcsDetailedStatisticsLocalFrameErrorEventThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of detected errored frames in the period is required
|
|
to be equal to or greater than in order for the event to be generated. 1)
|
|
The default value is one frame error. 2)
|
|
The lower bound is zero frame errors. 3)
|
|
The upper bound is unspecified."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 5 }
|
|
|
|
lcsDetailedStatisticsLocalFrameErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of detected errored frames in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 6 }
|
|
|
|
lcsDetailedStatisticsLocalTotalFrameErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 7 }
|
|
|
|
lcsDetailedStatisticsLocalTotalFrameErrorEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Frame Event TLVs that
|
|
have been generated since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 8 }
|
|
|
|
lcsDetailedStatisticsLocalFramePeriodErrorEventTimestamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 9 }
|
|
|
|
lcsDetailedStatisticsLocalFramePeriodErrorEventWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the duration of period in terms of frames."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 10 }
|
|
|
|
lcsDetailedStatisticsLocalFramePeriodErrorEventThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of errored frames in the period is required
|
|
to be equal to or greater than in order for the event to be generated."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 11 }
|
|
|
|
lcsDetailedStatisticsLocalFramePeriodErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of frame errors in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 12 }
|
|
|
|
lcsDetailedStatisticsLocalTotalFramePeriodErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 13 }
|
|
|
|
lcsDetailedStatisticsLocalTotalFramePeriodErrorEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Frame Period Event TLVs
|
|
that have been generated since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 14 }
|
|
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrorEventTimestamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 15 }
|
|
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrorEventWindow OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the number of symbols in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 16 }
|
|
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrorEventThreshold OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the number of errored symbols in the period is required to
|
|
be equal to or greater than in order for the event to be generated."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 17 }
|
|
|
|
lcsDetailedStatisticsLocalSymbolPeriodErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the number of symbol errors in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 18 }
|
|
|
|
lcsDetailedStatisticsLocalSymbolFramePeriodErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 19 }
|
|
|
|
lcsDetailedStatisticsLocalSymbolFramePeriodErrorEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Symbol Period Event TLVs that
|
|
have been generated since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 20 }
|
|
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryTimeStamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated,
|
|
in terms of 100 ms intervals, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 21 }
|
|
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 22 }
|
|
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the number of errored frame seconds in the period is required
|
|
to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 23 }
|
|
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 24 }
|
|
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryErrorTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 25 }
|
|
|
|
lcsDetailedStatisticsLocalEventSecondsSummaryEventTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that
|
|
have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 26 }
|
|
|
|
lcsDetailedStatisticsRemoteFrameErrorEventTimestamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 27 }
|
|
|
|
lcsDetailedStatisticsRemoteFrameErrorEventWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1)
|
|
The default value is one second. 2) The lower bound is one second. 3)
|
|
The upper bound is one minute."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 28 }
|
|
|
|
lcsDetailedStatisticsRemoteFrameErrorEventThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of detected errored frames in the period is required
|
|
to be equal to or greater than in order for the event to be generated. 1)
|
|
The default value is one frame error. 2)
|
|
The lower bound is zero frame errors. 3)
|
|
The upper bound is unspecified."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 29 }
|
|
|
|
lcsDetailedStatisticsRemoteFrameErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of detected errored frames in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 30 }
|
|
|
|
lcsDetailedStatisticsRemoteTotalFrameErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 31 }
|
|
|
|
lcsDetailedStatisticsRemoteTotalFrameErrorEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Frame Event TLVs that
|
|
have been generated since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 32 }
|
|
|
|
lcsDetailedStatisticsRemoteFramePeriodErrorEventTimestamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 33 }
|
|
|
|
lcsDetailedStatisticsRemoteFramePeriodErrorEventWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the duration of period in terms of frames."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 34 }
|
|
|
|
lcsDetailedStatisticsRemoteFramePeriodErrorEventThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of errored frames in the period is required
|
|
to be equal to or greater than in order for the event to be generated."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 35 }
|
|
|
|
lcsDetailedStatisticsRemoteFramePeriodErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of frame errors in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 36 }
|
|
|
|
lcsDetailedStatisticsRemoteTotalFramePeriodErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 37 }
|
|
|
|
lcsDetailedStatisticsRemoteTotalFramePeriodErrorEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Frame Period Event TLVs
|
|
that have been generated since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 38 }
|
|
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventTimestamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 39 }
|
|
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventWindow OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the number of symbols in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 40 }
|
|
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventThreshold OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the number of errored symbols in the period is required to
|
|
be equal to or greater than in order for the event to be generated."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 41 }
|
|
|
|
lcsDetailedStatisticsRemoteSymbolPeriodErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the number of symbol errors in the period."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 42 }
|
|
|
|
lcsDetailedStatisticsRemoteSymbolFramePeriodErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 43 }
|
|
|
|
lcsDetailedStatisticsRemoteSymbolFramePeriodErrorEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Symbol Period Event TLVs that
|
|
have been generated since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 44 }
|
|
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryTimeStamp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the time reference when the event was generated,
|
|
in terms of 100 ms intervals, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 45 }
|
|
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryWindow OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 46 }
|
|
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the number of errored frame seconds in the period is required
|
|
to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 47 }
|
|
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryEvents OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 48 }
|
|
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryErrorTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 49 }
|
|
|
|
lcsDetailedStatisticsRemoteEventSecondsSummaryEventTotal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that
|
|
have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer."
|
|
::= { lcsEthLinkOAMPortEventDetailedStatisticsEntry 50 }
|
|
|
|
|
|
lcsIPMC OBJECT IDENTIFIER ::= { lcsConfiguration 32 }
|
|
|
|
lcsIGMPSnooping OBJECT IDENTIFIER ::= { lcsIPMC 1 }
|
|
|
|
lcsIGMPSnoopingBasicConfigSnoopingEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snooping Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnooping 2 }
|
|
|
|
lcsIGMPSnoopingBasicConfigUnregisteredIPMCv4FloodingEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unregistered IPMCv4 Flooding Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnooping 3 }
|
|
|
|
lcsIGMPSnoopingBasicConfigIGMPSSMRange OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP SSM Range
|
|
IPv4 multicast address."
|
|
::= { lcsIGMPSnooping 4 }
|
|
|
|
lcsIGMPSnoopingBasicConfigIGMPSSMRangeLength OBJECT-TYPE
|
|
SYNTAX Integer32(4..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP SSM Range prefix. "
|
|
::= { lcsIGMPSnooping 5 }
|
|
|
|
lcsIGMPSnoopingBasicConfigLeaveProxyEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Leave Proxy Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnooping 6 }
|
|
|
|
lcsIGMPSnoopingBasicConfigProxyEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Proxy Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnooping 7 }
|
|
|
|
|
|
|
|
lcsIGMPSnoopingPortRelatedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIGMPSnoopingPortRelatedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsIGMPSnooping 8 }
|
|
|
|
lcsIGMPSnoopingPortRelatedEntry OBJECT-TYPE
|
|
SYNTAX LCSIGMPSnoopingPortRelatedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsIGMPSnoopingPortRelatedPort }
|
|
::= { lcsIGMPSnoopingPortRelatedTable 1 }
|
|
|
|
LCSIGMPSnoopingPortRelatedEntry ::= SEQUENCE {
|
|
lcsIGMPSnoopingPortRelatedPort Integer32,
|
|
lcsIGMPSnoopingPortRouterPort Integer32,
|
|
lcsIGMPSnoopingPortFastLeave Integer32,
|
|
lcsIGMPSnoopingPortThrottling Integer32,
|
|
lcsIGMPSnoopingPortFilteringProfile DisplayString
|
|
}
|
|
|
|
lcsIGMPSnoopingPortRelatedPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsIGMPSnoopingPortRelatedEntry 1 }
|
|
|
|
lcsIGMPSnoopingPortRouterPort OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Router Port
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnoopingPortRelatedEntry 2 }
|
|
|
|
lcsIGMPSnoopingPortFastLeave OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fast Leave
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnoopingPortRelatedEntry 3 }
|
|
|
|
lcsIGMPSnoopingPortThrottling OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Throttling.
|
|
Range: 0:unlimited, 1-10"
|
|
::= { lcsIGMPSnoopingPortRelatedEntry 4 }
|
|
|
|
lcsIGMPSnoopingPortFilteringProfile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filtering Profile"
|
|
::= { lcsIGMPSnoopingPortRelatedEntry 5 }
|
|
|
|
lcsIGMPSnoopingVLANConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIGMPSnoopingVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsIGMPSnooping 9 }
|
|
|
|
lcsIGMPSnoopingVLANConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSIGMPSnoopingVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsIGMPSnoopingVLANConfigIndex }
|
|
::= { lcsIGMPSnoopingVLANConfigTable 1 }
|
|
|
|
LCSIGMPSnoopingVLANConfigEntry ::= SEQUENCE {
|
|
lcsIGMPSnoopingVLANConfigIndex Integer32,
|
|
lcsIGMPSnoopingVLANConfigVLANID Integer32,
|
|
lcsIGMPSnoopingVLANConfigSnoopingEnabled Integer32,
|
|
lcsIGMPSnoopingVLANConfigQuerierElection Integer32,
|
|
lcsIGMPSnoopingVLANConfigQuerierAddress IpAddress,
|
|
lcsIGMPSnoopingVLANConfigCompatibility Integer32,
|
|
lcsIGMPSnoopingVLANConfigPRI Integer32,
|
|
lcsIGMPSnoopingVLANConfigRV Integer32,
|
|
lcsIGMPSnoopingVLANConfigQI Integer32,
|
|
lcsIGMPSnoopingVLANConfigQRI Integer32,
|
|
lcsIGMPSnoopingVLANConfigLLQI Integer32,
|
|
lcsIGMPSnoopingVLANConfigURI Integer32
|
|
}
|
|
|
|
lcsIGMPSnoopingVLANConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 1 }
|
|
|
|
lcsIGMPSnoopingVLANConfigVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 2 }
|
|
|
|
lcsIGMPSnoopingVLANConfigSnoopingEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP Snooping Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 3 }
|
|
|
|
lcsIGMPSnoopingVLANConfigQuerierElection OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Querier Election
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 4 }
|
|
|
|
lcsIGMPSnoopingVLANConfigQuerierAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Querier Address"
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 5 }
|
|
|
|
lcsIGMPSnoopingVLANConfigCompatibility OBJECT-TYPE
|
|
SYNTAX Integer32(0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compatibility
|
|
0:IGMP-Auto
|
|
1:Forced IGMPv1
|
|
2:Forced IGMPv2
|
|
3:Forced IGMPv3"
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 6 }
|
|
|
|
lcsIGMPSnoopingVLANConfigPRI OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority of Interface.
|
|
"
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 7 }
|
|
|
|
lcsIGMPSnoopingVLANConfigRV OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Robustness Variable."
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 8 }
|
|
|
|
lcsIGMPSnoopingVLANConfigQI OBJECT-TYPE
|
|
SYNTAX Integer32(1..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Query Interval."
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 9 }
|
|
|
|
lcsIGMPSnoopingVLANConfigQRI OBJECT-TYPE
|
|
SYNTAX Integer32(0..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Query Response Interval."
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 10 }
|
|
|
|
lcsIGMPSnoopingVLANConfigLLQI OBJECT-TYPE
|
|
SYNTAX Integer32(0..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last Member Query Interval."
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 11 }
|
|
|
|
lcsIGMPSnoopingVLANConfigURI OBJECT-TYPE
|
|
SYNTAX Integer32(0..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unsolicited Report Interval."
|
|
::= { lcsIGMPSnoopingVLANConfigEntry 12 }
|
|
|
|
|
|
lcsIGMPSnoopingStatusClear OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears all Statistics counters."
|
|
::= { lcsIGMPSnooping 10 }
|
|
|
|
|
|
lcsIGMPSnoopingStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIGMPSnoopingStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsIGMPSnooping 11 }
|
|
|
|
lcsIGMPSnoopingStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSIGMPSnoopingStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsIGMPSnoopingStatusIndex }
|
|
::= { lcsIGMPSnoopingStatusTable 1 }
|
|
|
|
LCSIGMPSnoopingStatusEntry ::= SEQUENCE {
|
|
lcsIGMPSnoopingStatusIndex Integer32,
|
|
lcsIGMPSnoopingStatusVLANID Integer32,
|
|
lcsIGMPSnoopingStatusQuerierVersion DisplayString,
|
|
lcsIGMPSnoopingStatusHostVersion DisplayString,
|
|
lcsIGMPSnoopingStatusQuerierStatus Integer32,
|
|
lcsIGMPSnoopingStatusQueriesTransmitted Integer32,
|
|
lcsIGMPSnoopingStatusQueriesReceived Integer32,
|
|
lcsIGMPSnoopingStatusV1ReportsReceived Integer32,
|
|
lcsIGMPSnoopingStatusV2ReportsReceived Integer32,
|
|
lcsIGMPSnoopingStatusV3ReportsReceived Integer32,
|
|
lcsIGMPSnoopingStatusV2LeavesReceived Integer32
|
|
}
|
|
|
|
lcsIGMPSnoopingStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsIGMPSnoopingStatusEntry 1 }
|
|
|
|
lcsIGMPSnoopingStatusVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsIGMPSnoopingStatusEntry 2 }
|
|
|
|
lcsIGMPSnoopingStatusQuerierVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Querier Version"
|
|
::= { lcsIGMPSnoopingStatusEntry 3 }
|
|
|
|
lcsIGMPSnoopingStatusHostVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Host Version"
|
|
::= { lcsIGMPSnoopingStatusEntry 4 }
|
|
|
|
lcsIGMPSnoopingStatusQuerierStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Querier Status.
|
|
0:Init
|
|
1:Idle
|
|
2:Active"
|
|
::= { lcsIGMPSnoopingStatusEntry 5 }
|
|
|
|
lcsIGMPSnoopingStatusQueriesTransmitted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queries Transmitted."
|
|
::= { lcsIGMPSnoopingStatusEntry 6 }
|
|
|
|
lcsIGMPSnoopingStatusQueriesReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queries Received."
|
|
::= { lcsIGMPSnoopingStatusEntry 7 }
|
|
|
|
lcsIGMPSnoopingStatusV1ReportsReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"V1 Reports Received"
|
|
::= { lcsIGMPSnoopingStatusEntry 8 }
|
|
|
|
lcsIGMPSnoopingStatusV2ReportsReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"V2 Reports Received"
|
|
::= { lcsIGMPSnoopingStatusEntry 9 }
|
|
|
|
lcsIGMPSnoopingStatusV3ReportsReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"V3 Reports Received"
|
|
::= { lcsIGMPSnoopingStatusEntry 10 }
|
|
|
|
lcsIGMPSnoopingStatusV2LeavesReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"V2 Leaves Received"
|
|
::= { lcsIGMPSnoopingStatusEntry 11 }
|
|
|
|
lcsIGMPSnoopingStatusRouterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIGMPSnoopingStatusRouterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsIGMPSnooping 12 }
|
|
|
|
lcsIGMPSnoopingStatusRouterPortEntry OBJECT-TYPE
|
|
SYNTAX LCSIGMPSnoopingStatusRouterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsIGMPSnoopingStatusRouterPortIndex }
|
|
::= { lcsIGMPSnoopingStatusRouterPortTable 1 }
|
|
|
|
LCSIGMPSnoopingStatusRouterPortEntry ::= SEQUENCE {
|
|
lcsIGMPSnoopingStatusRouterPortIndex Integer32,
|
|
lcsIGMPSnoopingStatusRouterPortPort Integer32
|
|
}
|
|
|
|
lcsIGMPSnoopingStatusRouterPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsIGMPSnoopingStatusRouterPortEntry 1 }
|
|
|
|
lcsIGMPSnoopingStatusRouterPortPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch port number.
|
|
0:DISABLE
|
|
1:IDLE
|
|
2:ACTIVE"
|
|
::= { lcsIGMPSnoopingStatusRouterPortEntry 2 }
|
|
|
|
|
|
|
|
lcsIGMPSnoopingGroupInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIGMPSnoopingGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsIGMPSnooping 13 }
|
|
|
|
lcsIGMPSnoopingGroupInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSIGMPSnoopingGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsIGMPSnoopingGroupInfoIndex }
|
|
::= { lcsIGMPSnoopingGroupInfoTable 1 }
|
|
|
|
LCSIGMPSnoopingGroupInfoEntry ::= SEQUENCE {
|
|
lcsIGMPSnoopingGroupInfoIndex Integer32,
|
|
lcsIGMPSnoopingGroupInfoVLANID Integer32,
|
|
lcsIGMPSnoopingGroupInfoGroups IpAddress,
|
|
lcsIGMPSnoopingGroupInfoPortMembers DisplayString
|
|
}
|
|
|
|
lcsIGMPSnoopingGroupInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsIGMPSnoopingGroupInfoEntry 1 }
|
|
|
|
lcsIGMPSnoopingGroupInfoVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsIGMPSnoopingGroupInfoEntry 2 }
|
|
|
|
lcsIGMPSnoopingGroupInfoGroups OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Groups"
|
|
::= { lcsIGMPSnoopingGroupInfoEntry 3 }
|
|
|
|
lcsIGMPSnoopingGroupInfoPortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Members"
|
|
::= { lcsIGMPSnoopingGroupInfoEntry 4 }
|
|
|
|
|
|
|
|
lcsIGMPSFMInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIGMPSFMInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsIGMPSnooping 14 }
|
|
|
|
lcsIGMPSFMInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSIGMPSFMInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsIGMPSFMInfoIndex }
|
|
::= { lcsIGMPSFMInfoTable 1 }
|
|
|
|
LCSIGMPSFMInfoEntry ::= SEQUENCE {
|
|
lcsIGMPSFMInfoIndex Integer32,
|
|
lcsIGMPSFMInfoVLANID Integer32,
|
|
lcsIGMPSFMInfoGroup IpAddress,
|
|
lcsIGMPSFMInfoPort Integer32,
|
|
lcsIGMPSFMInfoMode Integer32,
|
|
lcsIGMPSFMInfoSourceAddress DisplayString,
|
|
lcsIGMPSFMInfoType Integer32,
|
|
lcsIGMPSFMInfoHardwareFilterSwitch Integer32
|
|
|
|
}
|
|
|
|
lcsIGMPSFMInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsIGMPSFMInfoEntry 1 }
|
|
|
|
lcsIGMPSFMInfoVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsIGMPSFMInfoEntry 2 }
|
|
|
|
lcsIGMPSFMInfoGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group"
|
|
::= { lcsIGMPSFMInfoEntry 3 }
|
|
|
|
lcsIGMPSFMInfoPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port"
|
|
::= { lcsIGMPSFMInfoEntry 4 }
|
|
|
|
lcsIGMPSFMInfoMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode
|
|
0:Exclude.
|
|
1:Include"
|
|
::= { lcsIGMPSFMInfoEntry 5 }
|
|
|
|
lcsIGMPSFMInfoSourceAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address"
|
|
::= { lcsIGMPSFMInfoEntry 6 }
|
|
|
|
lcsIGMPSFMInfoType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type
|
|
0:Deny
|
|
1:Allow"
|
|
::= { lcsIGMPSFMInfoEntry 7 }
|
|
|
|
lcsIGMPSFMInfoHardwareFilterSwitch OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hardware Filter\Switch
|
|
0:No
|
|
1:Yes"
|
|
::= { lcsIGMPSFMInfoEntry 8 }
|
|
|
|
lcsMLDSnooping OBJECT IDENTIFIER ::= { lcsIPMC 2 }
|
|
|
|
lcsMLDSnoopingBasicConfigSnoopingEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Snooping Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnooping 2 }
|
|
|
|
lcsMLDSnoopingBasicConfigUnregisteredIPMCv6FloodingEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unregistered IPMCv6 Flooding Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnooping 3 }
|
|
|
|
lcsMLDSnoopingBasicConfigMLDSSMRange OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MLD SSM Range
|
|
IPv6 multicast address."
|
|
::= { lcsMLDSnooping 4 }
|
|
|
|
lcsMLDSnoopingBasicConfigMLDSSMRangeLength OBJECT-TYPE
|
|
SYNTAX Integer32(8..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MLD SSM Range prefix. "
|
|
::= { lcsMLDSnooping 5 }
|
|
|
|
lcsMLDSnoopingBasicConfigLeaveProxyEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Leave Proxy Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnooping 6 }
|
|
|
|
lcsMLDSnoopingBasicConfigProxyEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Proxy Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnooping 7 }
|
|
|
|
|
|
|
|
lcsMLDSnoopingPortRelatedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMLDSnoopingPortRelatedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMLDSnooping 8 }
|
|
|
|
lcsMLDSnoopingPortRelatedEntry OBJECT-TYPE
|
|
SYNTAX LCSMLDSnoopingPortRelatedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMLDSnoopingPortRelatedPort }
|
|
::= { lcsMLDSnoopingPortRelatedTable 1 }
|
|
|
|
LCSMLDSnoopingPortRelatedEntry ::= SEQUENCE {
|
|
lcsMLDSnoopingPortRelatedPort Integer32,
|
|
lcsMLDSnoopingPortRouterPort Integer32,
|
|
lcsMLDSnoopingPortFastLeave Integer32,
|
|
lcsMLDSnoopingPortThrottling Integer32,
|
|
lcsMLDSnoopingPortFilteringProfile DisplayString
|
|
}
|
|
|
|
lcsMLDSnoopingPortRelatedPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMLDSnoopingPortRelatedEntry 1 }
|
|
|
|
lcsMLDSnoopingPortRouterPort OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Router Port
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnoopingPortRelatedEntry 2 }
|
|
|
|
lcsMLDSnoopingPortFastLeave OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fast Leave
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnoopingPortRelatedEntry 3 }
|
|
|
|
lcsMLDSnoopingPortThrottling OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Throttling.
|
|
Range: 0:unlimited, 1-10"
|
|
::= { lcsMLDSnoopingPortRelatedEntry 4 }
|
|
|
|
lcsMLDSnoopingPortFilteringProfile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filtering Profile"
|
|
::= { lcsMLDSnoopingPortRelatedEntry 5 }
|
|
|
|
|
|
lcsMLDSnoopingVLANConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMLDSnoopingVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMLDSnooping 9 }
|
|
|
|
lcsMLDSnoopingVLANConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSMLDSnoopingVLANConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMLDSnoopingVLANConfigIndex }
|
|
::= { lcsMLDSnoopingVLANConfigTable 1 }
|
|
|
|
LCSMLDSnoopingVLANConfigEntry ::= SEQUENCE {
|
|
lcsMLDSnoopingVLANConfigIndex Integer32,
|
|
lcsMLDSnoopingVLANConfigVLANID Integer32,
|
|
lcsMLDSnoopingVLANConfigSnoopingEnabled Integer32,
|
|
lcsMLDSnoopingVLANConfigQuerierElection Integer32,
|
|
lcsMLDSnoopingVLANConfigCompatibility Integer32,
|
|
lcsMLDSnoopingVLANConfigPRI Integer32,
|
|
lcsMLDSnoopingVLANConfigRV Integer32,
|
|
lcsMLDSnoopingVLANConfigQI Integer32,
|
|
lcsMLDSnoopingVLANConfigQRI Integer32,
|
|
lcsMLDSnoopingVLANConfigLLQI Integer32,
|
|
lcsMLDSnoopingVLANConfigURI Integer32
|
|
}
|
|
|
|
lcsMLDSnoopingVLANConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMLDSnoopingVLANConfigEntry 1 }
|
|
|
|
lcsMLDSnoopingVLANConfigVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsMLDSnoopingVLANConfigEntry 2 }
|
|
|
|
lcsMLDSnoopingVLANConfigSnoopingEnabled OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP Snooping Enabled
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnoopingVLANConfigEntry 3 }
|
|
|
|
lcsMLDSnoopingVLANConfigQuerierElection OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Querier Election
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMLDSnoopingVLANConfigEntry 4 }
|
|
|
|
lcsMLDSnoopingVLANConfigCompatibility OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compatibility
|
|
0:MLD-Auto
|
|
1:Forced MLDv1
|
|
2:Forced MLDv2"
|
|
::= { lcsMLDSnoopingVLANConfigEntry 6 }
|
|
|
|
lcsMLDSnoopingVLANConfigPRI OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority of Interface.
|
|
"
|
|
::= { lcsMLDSnoopingVLANConfigEntry 7 }
|
|
|
|
lcsMLDSnoopingVLANConfigRV OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Robustness Variable."
|
|
::= { lcsMLDSnoopingVLANConfigEntry 8 }
|
|
|
|
lcsMLDSnoopingVLANConfigQI OBJECT-TYPE
|
|
SYNTAX Integer32(1..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Query Interval."
|
|
::= { lcsMLDSnoopingVLANConfigEntry 9 }
|
|
|
|
lcsMLDSnoopingVLANConfigQRI OBJECT-TYPE
|
|
SYNTAX Integer32(0..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Query Response Interval."
|
|
::= { lcsMLDSnoopingVLANConfigEntry 10 }
|
|
|
|
lcsMLDSnoopingVLANConfigLLQI OBJECT-TYPE
|
|
SYNTAX Integer32(0..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last Member Query Interval."
|
|
::= { lcsMLDSnoopingVLANConfigEntry 11 }
|
|
|
|
lcsMLDSnoopingVLANConfigURI OBJECT-TYPE
|
|
SYNTAX Integer32(0..31744)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unsolicited Report Interval."
|
|
::= { lcsMLDSnoopingVLANConfigEntry 12 }
|
|
|
|
|
|
lcsMLDSnoopingStatusClear OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears all Statistics counters."
|
|
::= { lcsMLDSnooping 10 }
|
|
|
|
|
|
lcsMLDSnoopingStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMLDSnoopingStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMLDSnooping 11 }
|
|
|
|
lcsMLDSnoopingStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSMLDSnoopingStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMLDSnoopingStatusIndex }
|
|
::= { lcsMLDSnoopingStatusTable 1 }
|
|
|
|
LCSMLDSnoopingStatusEntry ::= SEQUENCE {
|
|
lcsMLDSnoopingStatusIndex Integer32,
|
|
lcsMLDSnoopingStatusVLANID Integer32,
|
|
lcsMLDSnoopingStatusQuerierVersion DisplayString,
|
|
lcsMLDSnoopingStatusHostVersion DisplayString,
|
|
lcsMLDSnoopingStatusQuerierStatus Integer32,
|
|
lcsMLDSnoopingStatusQueriesTransmitted Integer32,
|
|
lcsMLDSnoopingStatusQueriesReceived Integer32,
|
|
lcsMLDSnoopingStatusV1ReportsReceived Integer32,
|
|
lcsMLDSnoopingStatusV2ReportsReceived Integer32,
|
|
lcsMLDSnoopingStatusV1LeavesReceived Integer32
|
|
}
|
|
|
|
lcsMLDSnoopingStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMLDSnoopingStatusEntry 1 }
|
|
|
|
lcsMLDSnoopingStatusVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsMLDSnoopingStatusEntry 2 }
|
|
|
|
lcsMLDSnoopingStatusQuerierVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Querier Version"
|
|
::= { lcsMLDSnoopingStatusEntry 3 }
|
|
|
|
lcsMLDSnoopingStatusHostVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Host Version"
|
|
::= { lcsMLDSnoopingStatusEntry 4 }
|
|
|
|
lcsMLDSnoopingStatusQuerierStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Querier Status.
|
|
0:Init
|
|
1:Idle
|
|
2:Active"
|
|
::= { lcsMLDSnoopingStatusEntry 5 }
|
|
|
|
lcsMLDSnoopingStatusQueriesTransmitted OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queries Transmitted."
|
|
::= { lcsMLDSnoopingStatusEntry 6 }
|
|
|
|
lcsMLDSnoopingStatusQueriesReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queries Received."
|
|
::= { lcsMLDSnoopingStatusEntry 7 }
|
|
|
|
lcsMLDSnoopingStatusV1ReportsReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"V1 Reports Received"
|
|
::= { lcsMLDSnoopingStatusEntry 8 }
|
|
|
|
lcsMLDSnoopingStatusV2ReportsReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"V2 Reports Received"
|
|
::= { lcsMLDSnoopingStatusEntry 9 }
|
|
|
|
lcsMLDSnoopingStatusV1LeavesReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"V1 Leaves Received"
|
|
::= { lcsMLDSnoopingStatusEntry 11 }
|
|
|
|
lcsMLDSnoopingStatusRouterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMLDSnoopingStatusRouterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMLDSnooping 12 }
|
|
|
|
lcsMLDSnoopingStatusRouterPortEntry OBJECT-TYPE
|
|
SYNTAX LCSMLDSnoopingStatusRouterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMLDSnoopingStatusRouterPortIndex }
|
|
::= { lcsMLDSnoopingStatusRouterPortTable 1 }
|
|
|
|
LCSMLDSnoopingStatusRouterPortEntry ::= SEQUENCE {
|
|
lcsMLDSnoopingStatusRouterPortIndex Integer32,
|
|
lcsMLDSnoopingStatusRouterPortPort Integer32
|
|
}
|
|
|
|
lcsMLDSnoopingStatusRouterPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMLDSnoopingStatusRouterPortEntry 1 }
|
|
|
|
lcsMLDSnoopingStatusRouterPortPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch port number.
|
|
0:DISABLE
|
|
1:IDLE
|
|
2:ACTIVE"
|
|
::= { lcsMLDSnoopingStatusRouterPortEntry 2 }
|
|
|
|
|
|
lcsMLDSnoopingGroupInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMLDSnoopingGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMLDSnooping 13 }
|
|
|
|
lcsMLDSnoopingGroupInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSMLDSnoopingGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMLDSnoopingGroupInfoIndex }
|
|
::= { lcsMLDSnoopingGroupInfoTable 1 }
|
|
|
|
LCSMLDSnoopingGroupInfoEntry ::= SEQUENCE {
|
|
lcsMLDSnoopingGroupInfoIndex Integer32,
|
|
lcsMLDSnoopingGroupInfoVLANID Integer32,
|
|
lcsMLDSnoopingGroupInfoGroups IpAddress,
|
|
lcsMLDSnoopingGroupInfoPortMembers DisplayString
|
|
}
|
|
|
|
lcsMLDSnoopingGroupInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMLDSnoopingGroupInfoEntry 1 }
|
|
|
|
lcsMLDSnoopingGroupInfoVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsMLDSnoopingGroupInfoEntry 2 }
|
|
|
|
lcsMLDSnoopingGroupInfoGroups OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Groups"
|
|
::= { lcsMLDSnoopingGroupInfoEntry 3 }
|
|
|
|
lcsMLDSnoopingGroupInfoPortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Members"
|
|
::= { lcsMLDSnoopingGroupInfoEntry 4 }
|
|
|
|
|
|
|
|
lcsMLDSFMInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMLDSFMInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMLDSnooping 14 }
|
|
|
|
lcsMLDSFMInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSMLDSFMInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMLDSFMInfoIndex }
|
|
::= { lcsMLDSFMInfoTable 1 }
|
|
|
|
LCSMLDSFMInfoEntry ::= SEQUENCE {
|
|
lcsMLDSFMInfoIndex Integer32,
|
|
lcsMLDSFMInfoVLANID Integer32,
|
|
lcsMLDSFMInfoGroup IpAddress,
|
|
lcsMLDSFMInfoPort Integer32,
|
|
lcsMLDSFMInfoMode Integer32,
|
|
lcsMLDSFMInfoSourceAddress DisplayString,
|
|
lcsMLDSFMInfoType Integer32,
|
|
lcsMLDSFMInfoHardwareFilterSwitch Integer32
|
|
|
|
}
|
|
|
|
lcsMLDSFMInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMLDSFMInfoEntry 1 }
|
|
|
|
lcsMLDSFMInfoVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsMLDSFMInfoEntry 2 }
|
|
|
|
lcsMLDSFMInfoGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group"
|
|
::= { lcsMLDSFMInfoEntry 3 }
|
|
|
|
lcsMLDSFMInfoPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port"
|
|
::= { lcsMLDSFMInfoEntry 4 }
|
|
|
|
lcsMLDSFMInfoMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode
|
|
0:Exclude.
|
|
1:Include"
|
|
::= { lcsMLDSFMInfoEntry 5 }
|
|
|
|
lcsMLDSFMInfoSourceAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address"
|
|
::= { lcsMLDSFMInfoEntry 6 }
|
|
|
|
lcsMLDSFMInfoType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type
|
|
0:Deny
|
|
1:Allow"
|
|
::= { lcsMLDSFMInfoEntry 7 }
|
|
|
|
lcsMLDSFMInfoHardwareFilterSwitch OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hardware Filter\Switch
|
|
0:No
|
|
1:Yes"
|
|
::= { lcsMLDSFMInfoEntry 8 }
|
|
|
|
lcsMVR OBJECT IDENTIFIER ::= { lcsConfiguration 33 }
|
|
|
|
lcsMVRConfig OBJECT IDENTIFIER ::= { lcsMVR 1 }
|
|
|
|
lcsMVRConfigMVRMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MVR Mode
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsMVRConfig 2 }
|
|
|
|
|
|
lcsVLANInterfaceSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVLANInterfaceSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MVR Config table"
|
|
::= { lcsMVRConfig 3 }
|
|
|
|
lcsVLANInterfaceSettingEntry OBJECT-TYPE
|
|
SYNTAX LCSVLANInterfaceSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MVR Config table"
|
|
INDEX { lcsVLANInterfaceSettingIndex }
|
|
::= { lcsVLANInterfaceSettingTable 1 }
|
|
|
|
LCSVLANInterfaceSettingEntry ::=
|
|
SEQUENCE {
|
|
lcsVLANInterfaceSettingIndex Integer32,
|
|
lcsVLANInterfaceSettingMVRVID Integer32,
|
|
lcsVLANInterfaceSettingMVRName DisplayString,
|
|
lcsVLANInterfaceSettingIGMPAddress IpAddress,
|
|
lcsVLANInterfaceSettingMode Integer32,
|
|
lcsVLANInterfaceSettingTagging Integer32,
|
|
lcsVLANInterfaceSettingPriority Integer32,
|
|
lcsVLANInterfaceSettingLLQI Integer32,
|
|
lcsVLANInterfaceSettingInterfaceChannelProfile DisplayString,
|
|
lcsVLANInterfaceSettingRowStatus RowStatus
|
|
}
|
|
|
|
lcsVLANInterfaceSettingIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MVR Config index."
|
|
::= {lcsVLANInterfaceSettingEntry 1 }
|
|
|
|
lcsVLANInterfaceSettingMVRVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MVR VLAN ID"
|
|
::= {lcsVLANInterfaceSettingEntry 2 }
|
|
|
|
lcsVLANInterfaceSettingMVRName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MVR Name. Length:0-16"
|
|
::= {lcsVLANInterfaceSettingEntry 3 }
|
|
|
|
lcsVLANInterfaceSettingIGMPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4 IGMP Address"
|
|
::= {lcsVLANInterfaceSettingEntry 4 }
|
|
|
|
lcsVLANInterfaceSettingMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode.
|
|
0:Dynamic
|
|
1:Compatible"
|
|
::= {lcsVLANInterfaceSettingEntry 5 }
|
|
|
|
lcsVLANInterfaceSettingTagging OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tagging.
|
|
0:Untagged
|
|
1:Tagged"
|
|
::= {lcsVLANInterfaceSettingEntry 6 }
|
|
|
|
lcsVLANInterfaceSettingPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority"
|
|
::= {lcsVLANInterfaceSettingEntry 7 }
|
|
|
|
lcsVLANInterfaceSettingLLQI OBJECT-TYPE
|
|
SYNTAX Integer32(0..31744)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLQI"
|
|
::= {lcsVLANInterfaceSettingEntry 8 }
|
|
|
|
lcsVLANInterfaceSettingInterfaceChannelProfile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Channel Profile."
|
|
::= {lcsVLANInterfaceSettingEntry 9 }
|
|
|
|
|
|
lcsVLANInterfaceSettingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsVLANInterfaceSettingEntry 10 }
|
|
|
|
lcsMVRVIDIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set VIDIndex before use VLANInterfaceSettingPortRoleTable table."
|
|
::= { lcsMVRConfig 4 }
|
|
|
|
lcsVLANInterfaceSettingPortRoleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSVLANInterfaceSettingPortRoleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Interface Setting Port Role table"
|
|
::= { lcsMVRConfig 5 }
|
|
|
|
lcsVLANInterfaceSettingPortRoleEntry OBJECT-TYPE
|
|
SYNTAX LCSVLANInterfaceSettingPortRoleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Interface Setting Port Role table"
|
|
INDEX { lcsVLANInterfaceSettingPortRoleIndex }
|
|
::= { lcsVLANInterfaceSettingPortRoleTable 1 }
|
|
|
|
LCSVLANInterfaceSettingPortRoleEntry ::=
|
|
SEQUENCE {
|
|
lcsVLANInterfaceSettingPortRoleIndex Integer32,
|
|
lcsVLANInterfaceSettingPortRolePort Integer32
|
|
}
|
|
|
|
lcsVLANInterfaceSettingPortRoleIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Interface Setting Port Role index."
|
|
::= {lcsVLANInterfaceSettingPortRoleEntry 1 }
|
|
|
|
lcsVLANInterfaceSettingPortRolePort OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Role.
|
|
0:Inactive
|
|
1:Source
|
|
2:Receiver"
|
|
::= {lcsVLANInterfaceSettingPortRoleEntry 2 }
|
|
|
|
|
|
|
|
lcsImmediateLeaveSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSImmediateLeaveSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Immediate Leave Setting table"
|
|
::= { lcsMVRConfig 6 }
|
|
|
|
lcsImmediateLeaveSettingEntry OBJECT-TYPE
|
|
SYNTAX LCSImmediateLeaveSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Immediate Leave Setting table"
|
|
INDEX { lcsImmediateLeaveSettingPort }
|
|
::= { lcsImmediateLeaveSettingTable 1 }
|
|
|
|
LCSImmediateLeaveSettingEntry ::=
|
|
SEQUENCE {
|
|
lcsImmediateLeaveSettingPort Integer32,
|
|
lcsImmediateLeaveSettingImmediateLeave Integer32
|
|
}
|
|
|
|
lcsImmediateLeaveSettingPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Immediate Leave Setting index."
|
|
::= {lcsImmediateLeaveSettingEntry 1 }
|
|
|
|
lcsImmediateLeaveSettingImmediateLeave OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Immediate Leave
|
|
0:Disable
|
|
1:Enable"
|
|
::= {lcsImmediateLeaveSettingEntry 2 }
|
|
|
|
|
|
lcsStatistics OBJECT IDENTIFIER ::= { lcsMVR 2 }
|
|
|
|
lcsMVRStatisticsClear OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics Clear.
|
|
1:Clear"
|
|
::= { lcsStatistics 2 }
|
|
|
|
lcsMVRStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMVRStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsStatistics 3 }
|
|
|
|
lcsMVRStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LCSMVRStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMVRStatisticsIndex }
|
|
::= { lcsMVRStatisticsTable 1 }
|
|
|
|
LCSMVRStatisticsEntry ::= SEQUENCE {
|
|
lcsMVRStatisticsIndex Integer32,
|
|
lcsMVRStatisticsVLANID Integer32,
|
|
lcsMVRStatisticsIGMPMLDQueriesReceived DisplayString,
|
|
lcsMVRStatisticsIGMPMLDQueriesTransmitted DisplayString,
|
|
lcsMVRStatisticsIGMPv1JoinsReceived DisplayString,
|
|
lcsMVRStatisticsIGMPv2MLDv1ReportsReceived DisplayString,
|
|
lcsMVRStatisticsIGMPv3MLDv2ReportsReceived DisplayString,
|
|
lcsMVRStatisticsIGMPv2MLDv1LeavesReceived DisplayString
|
|
}
|
|
|
|
lcsMVRStatisticsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMVRStatisticsEntry 1 }
|
|
|
|
lcsMVRStatisticsVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsMVRStatisticsEntry 2 }
|
|
|
|
lcsMVRStatisticsIGMPMLDQueriesReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP/MLD Queries Received"
|
|
::= { lcsMVRStatisticsEntry 3 }
|
|
|
|
lcsMVRStatisticsIGMPMLDQueriesTransmitted OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP/MLD Queries Transmitted"
|
|
::= { lcsMVRStatisticsEntry 4 }
|
|
|
|
lcsMVRStatisticsIGMPv1JoinsReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMPv1 Joins Received"
|
|
::= { lcsMVRStatisticsEntry 5 }
|
|
|
|
lcsMVRStatisticsIGMPv2MLDv1ReportsReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMPv2/MLDv1 Reports Received"
|
|
::= { lcsMVRStatisticsEntry 6 }
|
|
|
|
lcsMVRStatisticsIGMPv3MLDv2ReportsReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMPv3/MLDv2 Reports Received"
|
|
::= { lcsMVRStatisticsEntry 7 }
|
|
|
|
lcsMVRStatisticsIGMPv2MLDv1LeavesReceived OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMPv2/MLDv1 Leaves Received"
|
|
::= { lcsMVRStatisticsEntry 8 }
|
|
|
|
|
|
lcsGroupInformation OBJECT IDENTIFIER ::= { lcsMVR 3 }
|
|
|
|
lcsMVRGroupInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMVRGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsGroupInformation 1 }
|
|
|
|
lcsMVRGroupInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSMVRGroupInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMVRGroupInfoIndex }
|
|
::= { lcsMVRGroupInfoTable 1 }
|
|
|
|
LCSMVRGroupInfoEntry ::= SEQUENCE {
|
|
lcsMVRGroupInfoIndex Integer32,
|
|
lcsMVRGroupInfoVLANID Integer32,
|
|
lcsMVRGroupInfoGroups DisplayString,
|
|
lcsMVRGroupInfoPortMembers DisplayString
|
|
}
|
|
|
|
lcsMVRGroupInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMVRGroupInfoEntry 1 }
|
|
|
|
lcsMVRGroupInfoVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsMVRGroupInfoEntry 2 }
|
|
|
|
lcsMVRGroupInfoGroups OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Groups"
|
|
::= { lcsMVRGroupInfoEntry 3 }
|
|
|
|
lcsMVRGroupInfoPortMembers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Members"
|
|
::= { lcsMVRGroupInfoEntry 4 }
|
|
|
|
lcsMVRSFMInformation OBJECT IDENTIFIER ::= { lcsMVR 4 }
|
|
|
|
lcsMVRSFMInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMVRSFMInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsMVRSFMInformation 2 }
|
|
|
|
lcsMVRSFMInfoEntry OBJECT-TYPE
|
|
SYNTAX LCSMVRSFMInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsMVRSFMInfoIndex }
|
|
::= { lcsMVRSFMInfoTable 1 }
|
|
|
|
LCSMVRSFMInfoEntry ::= SEQUENCE {
|
|
lcsMVRSFMInfoIndex Integer32,
|
|
lcsMVRSFMInfoVLANID Integer32,
|
|
lcsMVRSFMInfoGroup DisplayString,
|
|
lcsMVRSFMInfoPort Integer32,
|
|
lcsMVRSFMInfoMode Integer32,
|
|
lcsMVRSFMInfoSourceAddress DisplayString,
|
|
lcsMVRSFMInfoType Integer32,
|
|
lcsMVRSFMInfoHardwareFilterSwitch Integer32
|
|
|
|
}
|
|
|
|
lcsMVRSFMInfoIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsMVRSFMInfoEntry 1 }
|
|
|
|
lcsMVRSFMInfoVLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID"
|
|
::= { lcsMVRSFMInfoEntry 2 }
|
|
|
|
lcsMVRSFMInfoGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group"
|
|
::= { lcsMVRSFMInfoEntry 3 }
|
|
|
|
lcsMVRSFMInfoPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port"
|
|
::= { lcsMVRSFMInfoEntry 4 }
|
|
|
|
lcsMVRSFMInfoMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mode
|
|
0:Exclude.
|
|
1:Include"
|
|
::= { lcsMVRSFMInfoEntry 5 }
|
|
|
|
lcsMVRSFMInfoSourceAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address"
|
|
::= { lcsMVRSFMInfoEntry 6 }
|
|
|
|
lcsMVRSFMInfoType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type
|
|
0:Deny
|
|
1:Allow"
|
|
::= { lcsMVRSFMInfoEntry 7 }
|
|
|
|
lcsMVRSFMInfoHardwareFilterSwitch OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hardware Filter\Switch
|
|
0:No
|
|
1:Yes"
|
|
::= { lcsMVRSFMInfoEntry 8 }
|
|
|
|
|
|
lcsIPMCLIB OBJECT IDENTIFIER ::= { lcsConfiguration 34 }
|
|
|
|
lcsMulticastFilteringProfileMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Mode.
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsIPMCLIB 1 }
|
|
|
|
|
|
lcsMulticastFilteringProfileSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMulticastFilteringProfileSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Setting table"
|
|
::= { lcsIPMCLIB 2 }
|
|
|
|
lcsMulticastFilteringProfileSettingEntry OBJECT-TYPE
|
|
SYNTAX LCSMulticastFilteringProfileSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Setting table."
|
|
INDEX { lcsMulticastFilteringProfileSettingIndex }
|
|
::= { lcsMulticastFilteringProfileSettingTable 1 }
|
|
|
|
LCSMulticastFilteringProfileSettingEntry ::=
|
|
SEQUENCE {
|
|
lcsMulticastFilteringProfileSettingIndex Integer32,
|
|
lcsMulticastFilteringProfileSettingProfileName DisplayString,
|
|
lcsMulticastFilteringProfileSettingProfileDescription DisplayString,
|
|
lcsMulticastFilteringProfileSettingRowStatus RowStatus
|
|
}
|
|
|
|
lcsMulticastFilteringProfileSettingIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Setting index."
|
|
::= {lcsMulticastFilteringProfileSettingEntry 1 }
|
|
|
|
|
|
lcsMulticastFilteringProfileSettingProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile Name. Length:1-16"
|
|
::= {lcsMulticastFilteringProfileSettingEntry 2 }
|
|
|
|
lcsMulticastFilteringProfileSettingProfileDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile Description. Length:0-64"
|
|
::= {lcsMulticastFilteringProfileSettingEntry 3 }
|
|
|
|
lcsMulticastFilteringProfileSettingRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsMulticastFilteringProfileSettingEntry 4 }
|
|
|
|
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsProfileNameIndex OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this Profile Name value before use MulticastFilteringProfileRuleSettingsTable table"
|
|
::= { lcsIPMCLIB 3 }
|
|
|
|
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMulticastFilteringProfileRuleSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Rule Setting table"
|
|
::= { lcsIPMCLIB 4 }
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsEntry OBJECT-TYPE
|
|
SYNTAX LCSMulticastFilteringProfileRuleSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Rule Setting table."
|
|
INDEX { lcsMulticastFilteringProfileRuleSettingsIndex }
|
|
::= { lcsMulticastFilteringProfileRuleSettingsTable 1 }
|
|
|
|
LCSMulticastFilteringProfileRuleSettingsEntry ::=
|
|
SEQUENCE {
|
|
lcsMulticastFilteringProfileRuleSettingsTableIndex Integer32,
|
|
lcsMulticastFilteringProfileRuleSettingsProfileName DisplayString,
|
|
lcsMulticastFilteringProfileRuleSettingsIndex Integer32,
|
|
lcsMulticastFilteringProfileRuleSettingsEntryName DisplayString,
|
|
lcsMulticastFilteringProfileRuleSettingsAddressRange DisplayString,
|
|
lcsMulticastFilteringProfileRuleSettingsAction Integer32,
|
|
lcsMulticastFilteringProfileRuleSettingsLog Integer32,
|
|
lcsMulticastFilteringProfileRuleSettingsRowStatus RowStatus
|
|
}
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsTableIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Rule Setting index."
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 1 }
|
|
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Profile Name"
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 2 }
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 3 }
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsEntryName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry Name, Length: 1-16"
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 4 }
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsAddressRange OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address Range"
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 5 }
|
|
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsAction OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Deny
|
|
1:Permit"
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 6 }
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsLog OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Disable
|
|
1:Enable"
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 7 }
|
|
|
|
|
|
lcsMulticastFilteringProfileRuleSettingsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsMulticastFilteringProfileRuleSettingsEntry 8 }
|
|
|
|
|
|
lcsMulticastFilteringProfileAddressConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSMulticastFilteringProfileAddressConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Address Config table"
|
|
::= { lcsIPMCLIB 5 }
|
|
|
|
lcsMulticastFilteringProfileAddressConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSMulticastFilteringProfileAddressConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Address Config table."
|
|
INDEX { lcsMulticastFilteringProfileAddressConfigTableIndex }
|
|
::= { lcsMulticastFilteringProfileAddressConfigTable 1 }
|
|
|
|
LCSMulticastFilteringProfileAddressConfigEntry ::=
|
|
SEQUENCE {
|
|
lcsMulticastFilteringProfileAddressConfigTableIndex Integer32,
|
|
lcsMulticastFilteringProfileAddressConfigEntryName DisplayString,
|
|
lcsMulticastFilteringProfileAddressConfigStartAddress DisplayString,
|
|
lcsMulticastFilteringProfileAddressConfigEndAddress DisplayString,
|
|
lcsMulticastFilteringProfileAddressConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsMulticastFilteringProfileAddressConfigTableIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast Filtering Profile Address Config index."
|
|
::= {lcsMulticastFilteringProfileAddressConfigEntry 1 }
|
|
|
|
|
|
lcsMulticastFilteringProfileAddressConfigEntryName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry Name, Length: 1-16"
|
|
::= {lcsMulticastFilteringProfileAddressConfigEntry 2 }
|
|
|
|
lcsMulticastFilteringProfileAddressConfigStartAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4/IPv6 Multicast Group Address"
|
|
::= {lcsMulticastFilteringProfileAddressConfigEntry 3 }
|
|
|
|
lcsMulticastFilteringProfileAddressConfigEndAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv4/IPv6 Multicast Group Address"
|
|
::= {lcsMulticastFilteringProfileAddressConfigEntry 4 }
|
|
|
|
lcsMulticastFilteringProfileAddressConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status."
|
|
::= {lcsMulticastFilteringProfileAddressConfigEntry 5 }
|
|
|
|
lcsEEE OBJECT IDENTIFIER ::= { lcsConfiguration 35 }
|
|
|
|
lcsPortPowerSavings OBJECT IDENTIFIER ::= { lcsEEE 1 }
|
|
|
|
lcsEnergyEfficientEthernetConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSEnergyEfficientEthernetConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortPowerSavings 2 }
|
|
|
|
lcsEnergyEfficientEthernetConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSEnergyEfficientEthernetConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsEnergyEfficientEthernetConfigPort }
|
|
::= { lcsEnergyEfficientEthernetConfigTable 1 }
|
|
|
|
LCSEnergyEfficientEthernetConfigEntry ::= SEQUENCE {
|
|
lcsEnergyEfficientEthernetConfigPort Integer32,
|
|
lcsEnergyEfficientEthernetConfigPortConfig Integer32
|
|
}
|
|
|
|
lcsEnergyEfficientEthernetConfigPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { lcsEnergyEfficientEthernetConfigEntry 1 }
|
|
|
|
lcsEnergyEfficientEthernetConfigPortConfig OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether EEE is enabled for this port.
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsEnergyEfficientEthernetConfigEntry 2 }
|
|
|
|
-- =======================================================================================================================
|
|
|
|
lcsAggregation OBJECT IDENTIFIER ::= { lcsConfiguration 36 }
|
|
|
|
lcsAggregationStatic OBJECT IDENTIFIER ::= { lcsAggregation 1 }
|
|
|
|
lcsAggrSourceMACAddress OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MAC Address"
|
|
::= { lcsAggregationStatic 2 }
|
|
|
|
lcsAggrDestinationMACAddress OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC Address"
|
|
::= { lcsAggregationStatic 3 }
|
|
|
|
lcsAggrIPAddress OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address"
|
|
::= { lcsAggregationStatic 4 }
|
|
|
|
lcsAggrTCPUDPPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TCP/UDP Port Number"
|
|
::= { lcsAggregationStatic 5 }
|
|
|
|
|
|
lcsAggrGroupConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSAggrGroupConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsAggregationStatic 6 }
|
|
|
|
lcsAggrGroupConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSAggrGroupConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsAggrGroupConfigPort }
|
|
::= { lcsAggrGroupConfigTable 1 }
|
|
|
|
LCSAggrGroupConfigEntry ::= SEQUENCE {
|
|
lcsAggrGroupConfigPort Integer32,
|
|
lcsAggrGroupConfigGroup Integer32,
|
|
lcsAggrGroupConfig Integer32
|
|
}
|
|
|
|
lcsAggrGroupConfigPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port index"
|
|
::= { lcsAggrGroupConfigEntry 1 }
|
|
|
|
lcsAggrGroupConfigGroup OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"group index"
|
|
::= { lcsAggrGroupConfigEntry 2 }
|
|
|
|
lcsAggrGroupConfig OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Aggregation Group Configuration"
|
|
::= { lcsAggrGroupConfigEntry 3 }
|
|
|
|
lcsLACPConfiguration OBJECT IDENTIFIER ::= { lcsAggregation 2 }
|
|
|
|
lcsLACPPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLACPPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLACPConfiguration 1 }
|
|
|
|
lcsLACPPortConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSLACPPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLACPPortConfigPort }
|
|
::= { lcsLACPPortConfigTable 1 }
|
|
|
|
LCSLACPPortConfigEntry ::= SEQUENCE {
|
|
lcsLACPPortConfigPort Integer32,
|
|
lcsLACPPortConfigEnabled Integer32,
|
|
lcsLACPPortConfigKey Integer32,
|
|
lcsLACPPortConfigRole Integer32,
|
|
lcsLACPPortConfigTimeout Integer32,
|
|
lcsLACPPortConfigPrio Integer32
|
|
}
|
|
|
|
lcsLACPPortConfigPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port index"
|
|
::= { lcsLACPPortConfigEntry 1 }
|
|
|
|
lcsLACPPortConfigEnabled OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether LACP is enabled on this switch port.
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsLACPPortConfigEntry 2 }
|
|
|
|
lcsLACPPortConfigKey OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Key value incurred by the port, range 1-Number of link aggregations."
|
|
::= { lcsLACPPortConfigEntry 3 }
|
|
|
|
lcsLACPPortConfigRole OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Role shows the LACP activity status.
|
|
0:Passive
|
|
1:Active"
|
|
::= { lcsLACPPortConfigEntry 4 }
|
|
|
|
lcsLACPPortConfigTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Timeout controls the period between BPDU transmissions.
|
|
0:Slow
|
|
1:Fast"
|
|
::= { lcsLACPPortConfigEntry 5 }
|
|
|
|
lcsLACPPortConfigPrio OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Prio controls the priority of the port."
|
|
::= { lcsLACPPortConfigEntry 6 }
|
|
|
|
|
|
lcsLacpSystemStatus OBJECT IDENTIFIER ::= { lcsAggregation 3 }
|
|
|
|
lcsLacpSystemStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLacpSystemStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLacpSystemStatus 1 }
|
|
|
|
lcsLacpSystemStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSLacpSystemStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLacpSystemStatusIndex }
|
|
::= { lcsLacpSystemStatusTable 1 }
|
|
|
|
LCSLacpSystemStatusEntry ::= SEQUENCE {
|
|
lcsLacpSystemStatusIndex Integer32,
|
|
lcsLacpSystemStatusAggrID DisplayString,
|
|
lcsLacpSystemStatusPartnerSystemID DisplayString,
|
|
lcsLacpSystemStatusPartnerKey DisplayString,
|
|
lcsLacpSystemStatusPartnerPrio DisplayString,
|
|
lcsLacpSystemStatusLastChanged DisplayString,
|
|
lcsLacpSystemStatusLocalPorts DisplayString
|
|
}
|
|
|
|
lcsLacpSystemStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65536)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"index"
|
|
::= { lcsLacpSystemStatusEntry 1 }
|
|
|
|
lcsLacpSystemStatusAggrID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Aggregation ID associated with this aggregation instance."
|
|
::= { lcsLacpSystemStatusEntry 2 }
|
|
|
|
lcsLacpSystemStatusPartnerSystemID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system ID (MAC address) of the aggregation partner."
|
|
::= { lcsLacpSystemStatusEntry 3 }
|
|
|
|
lcsLacpSystemStatusPartnerKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Key that the partner has assigned to this aggregation ID."
|
|
::= { lcsLacpSystemStatusEntry 4 }
|
|
|
|
lcsLacpSystemStatusPartnerPrio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority that the partner has assigned to this aggregation ID."
|
|
::= { lcsLacpSystemStatusEntry 5 }
|
|
|
|
lcsLacpSystemStatusLastChanged OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this aggregation changed."
|
|
::= { lcsLacpSystemStatusEntry 6 }
|
|
|
|
lcsLacpSystemStatusLocalPorts OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows which ports are a part of this aggregation for this switch."
|
|
::= { lcsLacpSystemStatusEntry 7 }
|
|
|
|
lcsLACPInternalPortStatus OBJECT IDENTIFIER ::= { lcsAggregation 4 }
|
|
|
|
lcsLACPInternalPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLACPInternalPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLACPInternalPortStatus 1 }
|
|
|
|
lcsLACPInternalPortStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSLACPInternalPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLACPInternalPortStatusIndex }
|
|
::= { lcsLACPInternalPortStatusTable 1 }
|
|
|
|
LCSLACPInternalPortStatusEntry ::= SEQUENCE {
|
|
lcsLACPInternalPortStatusIndex Integer32,
|
|
lcsLACPInternalPortStatusPort DisplayString,
|
|
lcsLACPInternalPortStatusState DisplayString,
|
|
lcsLACPInternalPortStatusKey DisplayString,
|
|
lcsLACPInternalPortStatusPriority DisplayString,
|
|
lcsLACPInternalPortStatusActivity DisplayString,
|
|
lcsLACPInternalPortStatusTimeout DisplayString,
|
|
lcsLACPInternalPortStatusAggregation DisplayString,
|
|
lcsLACPInternalPortStatusSynchronization DisplayString,
|
|
lcsLACPInternalPortStatusCollecting DisplayString,
|
|
lcsLACPInternalPortStatusDistributing DisplayString,
|
|
lcsLACPInternalPortStatusDefaulted DisplayString,
|
|
lcsLACPInternalPortStatusExpired DisplayString
|
|
}
|
|
|
|
lcsLACPInternalPortStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"index"
|
|
::= { lcsLACPInternalPortStatusEntry 1 }
|
|
|
|
lcsLACPInternalPortStatusPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch port number."
|
|
::= { lcsLACPInternalPortStatusEntry 2 }
|
|
|
|
lcsLACPInternalPortStatusState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current port state:
|
|
Down: The port is not active.
|
|
Active: The port is in active state.
|
|
Standby: The port is in standby state."
|
|
::= { lcsLACPInternalPortStatusEntry 3 }
|
|
|
|
lcsLACPInternalPortStatusKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key assigned to this port. Only ports with the same key can aggregate together."
|
|
::= { lcsLACPInternalPortStatusEntry 4 }
|
|
|
|
lcsLACPInternalPortStatusPriority OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority assigned to this aggregation group."
|
|
::= { lcsLACPInternalPortStatusEntry 5 }
|
|
|
|
lcsLACPInternalPortStatusActivity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LACP mode of the group (Active or Passive)."
|
|
::= { lcsLACPInternalPortStatusEntry 6 }
|
|
|
|
lcsLACPInternalPortStatusTimeout OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout mode configured for the port (Fast or Slow)."
|
|
::= { lcsLACPInternalPortStatusEntry 7 }
|
|
|
|
lcsLACPInternalPortStatusAggregation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show whether the system considers this link to be aggregateable. i.e., a potential candidate for aggregation."
|
|
::= { lcsLACPInternalPortStatusEntry 8 }
|
|
|
|
lcsLACPInternalPortStatusSynchronization OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show whether the system considers this link to be IN_SYNC."
|
|
::= { lcsLACPInternalPortStatusEntry 9 }
|
|
|
|
lcsLACPInternalPortStatusCollecting OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if collection of incoming frames on this link is enabled."
|
|
::= { lcsLACPInternalPortStatusEntry 10 }
|
|
|
|
lcsLACPInternalPortStatusDistributing OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if distribution of outgoing frames on this link is enabled."
|
|
::= { lcsLACPInternalPortStatusEntry 11 }
|
|
|
|
lcsLACPInternalPortStatusDefaulted OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if the Actor's Receive machine is using Defaulted operational Partner information."
|
|
::= { lcsLACPInternalPortStatusEntry 12 }
|
|
|
|
lcsLACPInternalPortStatusExpired OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if that the Actor's Receive machine is in the EXPIRED state."
|
|
::= { lcsLACPInternalPortStatusEntry 13 }
|
|
|
|
|
|
lcsLACPNeighborPortStatus OBJECT IDENTIFIER ::= { lcsAggregation 5 }
|
|
|
|
lcsLACPNeighborPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLACPNeighborPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLACPNeighborPortStatus 1 }
|
|
|
|
lcsLACPNeighborPortStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSLACPNeighborPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLACPNeighborPortStatusIndex }
|
|
::= { lcsLACPNeighborPortStatusTable 1 }
|
|
|
|
LCSLACPNeighborPortStatusEntry ::= SEQUENCE {
|
|
lcsLACPNeighborPortStatusIndex Integer32,
|
|
lcsLACPNeighborPortStatusPort DisplayString,
|
|
lcsLACPNeighborPortStatusState DisplayString,
|
|
lcsLACPNeighborPortStatusAggrID DisplayString,
|
|
lcsLACPNeighborPortStatusPartnerKey DisplayString,
|
|
lcsLACPNeighborPortStatusPartnerPort DisplayString,
|
|
lcsLACPNeighborPortStatusPartnerPortPrio DisplayString,
|
|
lcsLACPNeighborPortStatusActivity DisplayString,
|
|
lcsLACPNeighborPortStatusTimeout DisplayString,
|
|
lcsLACPNeighborPortStatusAggregation DisplayString,
|
|
lcsLACPNeighborPortStatusSynchronization DisplayString,
|
|
lcsLACPNeighborPortStatusCollecting DisplayString,
|
|
lcsLACPNeighborPortStatusDistributing DisplayString,
|
|
lcsLACPNeighborPortStatusDefaulted DisplayString,
|
|
lcsLACPNeighborPortStatusExpired DisplayString
|
|
}
|
|
|
|
lcsLACPNeighborPortStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"index"
|
|
::= { lcsLACPNeighborPortStatusEntry 1 }
|
|
|
|
lcsLACPNeighborPortStatusPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switch port number."
|
|
::= { lcsLACPNeighborPortStatusEntry 2 }
|
|
|
|
lcsLACPNeighborPortStatusState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current port state:
|
|
Down: The port is not active.
|
|
Active: The port is in active state.
|
|
Standby: The port is in standby state."
|
|
::= { lcsLACPNeighborPortStatusEntry 3 }
|
|
|
|
lcsLACPNeighborPortStatusAggrID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aggregation group ID which the port is assigned to."
|
|
::= { lcsLACPNeighborPortStatusEntry 4 }
|
|
|
|
lcsLACPNeighborPortStatusPartnerKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key assigned to this port by the partner."
|
|
::= { lcsLACPNeighborPortStatusEntry 5 }
|
|
|
|
lcsLACPNeighborPortStatusPartnerPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The partner port number associated with this link."
|
|
::= { lcsLACPNeighborPortStatusEntry 6 }
|
|
|
|
lcsLACPNeighborPortStatusPartnerPortPrio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority assigned to this partner port ."
|
|
::= { lcsLACPNeighborPortStatusEntry 7 }
|
|
|
|
lcsLACPNeighborPortStatusActivity OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LACP mode of the group (Active or Passive)."
|
|
::= { lcsLACPNeighborPortStatusEntry 8 }
|
|
|
|
lcsLACPNeighborPortStatusTimeout OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout mode configured for the partner port (Fast or Slow)."
|
|
::= { lcsLACPNeighborPortStatusEntry 9 }
|
|
|
|
lcsLACPNeighborPortStatusAggregation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show whether the partner considers this link to be aggregateable."
|
|
::= { lcsLACPNeighborPortStatusEntry 10 }
|
|
|
|
lcsLACPNeighborPortStatusSynchronization OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show whether the partner considers this link to be IN_SYNC"
|
|
::= { lcsLACPNeighborPortStatusEntry 11 }
|
|
|
|
lcsLACPNeighborPortStatusCollecting OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if collection of incoming frames on this link is enabled."
|
|
::= { lcsLACPNeighborPortStatusEntry 12 }
|
|
|
|
lcsLACPNeighborPortStatusDistributing OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if distribution of outgoing frames on this link is enabled."
|
|
::= { lcsLACPNeighborPortStatusEntry 13 }
|
|
|
|
lcsLACPNeighborPortStatusDefaulted OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if the partners Receive machine is using Defaulted operational Partner information."
|
|
::= { lcsLACPNeighborPortStatusEntry 14 }
|
|
|
|
lcsLACPNeighborPortStatusExpired OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show if that the partners Receive machine is in the EXPIRED state."
|
|
::= { lcsLACPNeighborPortStatusEntry 15 }
|
|
|
|
|
|
lcsLACPStatus OBJECT IDENTIFIER ::= { lcsAggregation 6 }
|
|
|
|
lcsLACPStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLACPStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsLACPStatus 1 }
|
|
|
|
lcsLACPStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSLACPStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsLACPStatusPort }
|
|
::= { lcsLACPStatusTable 1 }
|
|
|
|
LCSLACPStatusEntry ::= SEQUENCE {
|
|
lcsLACPStatusPort Integer32,
|
|
lcsLACPStatusLACP DisplayString,
|
|
lcsLACPStatusKey DisplayString,
|
|
lcsLACPStatusAggrID DisplayString,
|
|
lcsLACPStatusPartnerSystemID DisplayString,
|
|
lcsLACPStatusPartnerPort DisplayString,
|
|
lcsLACPStatusPartnerPrio DisplayString
|
|
}
|
|
|
|
lcsLACPStatusPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"index"
|
|
::= { lcsLACPStatusEntry 1 }
|
|
|
|
lcsLACPStatusLACP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Yes: means that LACP is enabled and the port link is up.
|
|
No: means that LACP is not enabled or that the port link is down.
|
|
Backup: means that the port could not join the aggregation group but will join if other port leaves. Meanwhile it's LACP status is disabled."
|
|
::= { lcsLACPStatusEntry 2 }
|
|
|
|
lcsLACPStatusKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The key assigned to this port. Only ports with the same key can aggregate together."
|
|
::= { lcsLACPStatusEntry 3 }
|
|
|
|
lcsLACPStatusAggrID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Aggregation ID assigned to this aggregation group."
|
|
::= { lcsLACPStatusEntry 4 }
|
|
|
|
lcsLACPStatusPartnerSystemID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The partner's System ID (MAC address)."
|
|
::= { lcsLACPStatusEntry 5 }
|
|
|
|
lcsLACPStatusPartnerPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The partner's port number connected to this port."
|
|
::= { lcsLACPStatusEntry 6 }
|
|
|
|
lcsLACPStatusPartnerPrio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The partner's port priority."
|
|
::= { lcsLACPStatusEntry 7 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsLMC OBJECT IDENTIFIER ::= { lcsConfiguration 1500 }
|
|
|
|
lcsLMCOperating OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LMC Operating Switch
|
|
0:Disable
|
|
1:Enable
|
|
2:Try"
|
|
::= { lcsLMC 1 }
|
|
|
|
lcsLMCConfigViaDHCP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables LMC configuration via DHCP option 43
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsLMC 2 }
|
|
|
|
lcsLMCDomain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LMC Domain for example cloud.lancom.de"
|
|
::= { lcsLMC 3 }
|
|
|
|
lcsLMCAutoRenew OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Renew DHCP lease early when connection to LMC is not possible
|
|
0:Disabled
|
|
1:Enabled"
|
|
::= { lcsLMC 4 }
|
|
|
|
lcsLMCRolloutProjectID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LMC Project rollout information string"
|
|
::= { lcsLMC 5 }
|
|
|
|
lcsLMCRolloutLocationID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LMC Location rollout information string"
|
|
::= { lcsLMC 6 }
|
|
|
|
lcsLMCRolloutRole OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LMC Role rollout information string"
|
|
::= { lcsLMC 7 }
|
|
|
|
|
|
lcsLMCZeroTouchSupport OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Support for Zero Touch
|
|
0:No
|
|
1:Yes"
|
|
::= { lcsLMC 50 }
|
|
|
|
lcsLMCPairingTokenPresent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Paring Token present
|
|
0:No
|
|
1:Yes"
|
|
::= { lcsLMC 51 }
|
|
|
|
|
|
lcsLMCManagementStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Unpaired
|
|
1:Paired
|
|
2:Disabled
|
|
3:DisabledByWLC
|
|
4:Operating
|
|
5:HTTPProtocolError
|
|
6:HTTPConnectionError
|
|
7:DNSError
|
|
8:MemoryError
|
|
9:NotYet
|
|
10:Redirect
|
|
11:AuthenticationError
|
|
12:Error
|
|
13:CertificateStorageError
|
|
14:PairedAndClaimed
|
|
15:CertificateError
|
|
16:DeactivatedNoActivationCode"
|
|
::= { lcsLMC 53 }
|
|
|
|
lcsLMCControlStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Unpaired
|
|
1:Paired
|
|
2:Disabled
|
|
3:DisabledByWLC
|
|
4:Operating
|
|
5:HTTPProtocolError
|
|
6:HTTPConnectionError
|
|
7:DNSError
|
|
8:MemoryError
|
|
9:NotYet
|
|
10:Redirect
|
|
11:AuthenticationError
|
|
12:Error
|
|
13:CertificateStorageError
|
|
14:PairedAndClaimed
|
|
15:CertificateError
|
|
16:DeactivatedNoActivationCode"
|
|
|
|
::= { lcsLMC 54 }
|
|
|
|
lcsLMCMonitoringStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:Unpaired
|
|
1:Paired
|
|
2:Disabled
|
|
3:DisabledByWLC
|
|
4:Operating
|
|
5:HTTPProtocolError
|
|
6:HTTPConnectionError
|
|
7:DNSError
|
|
8:MemoryError
|
|
9:NotYet
|
|
10:Redirect
|
|
11:AuthenticationError
|
|
12:Error
|
|
13:CertificateStorageError
|
|
14:PairedAndClaimed
|
|
15:CertificateError
|
|
16:DeactivatedNoActivationCode"
|
|
::= { lcsLMC 55 }
|
|
|
|
|
|
lcsLMCConfigModified OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration modified by LMC
|
|
0:No
|
|
1:Yes"
|
|
::= { lcsLMC 57 }
|
|
|
|
lcsLMCDeviceID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Device ID"
|
|
::= { lcsLMC 58 }
|
|
|
|
lcsLMCStatusRTT OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Heartbeat round trip time"
|
|
::= { lcsLMC 100 }
|
|
|
|
|
|
--lcsLMCTransportStatusTable
|
|
|
|
lcsLMCTransportStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSLMCTransportStatusTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transport status"
|
|
::= { lcsLMC 101 }
|
|
|
|
lcsLMCTransportStatusTableEntry OBJECT-TYPE
|
|
SYNTAX LCSLMCTransportStatusTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transport number"
|
|
INDEX { lcsLMCTransportStatusTransportNumberIndex }
|
|
::= { lcsLMCTransportStatusTable 1 }
|
|
|
|
LCSLMCTransportStatusTableEntry ::= SEQUENCE {
|
|
lcsLMCTransportStatusTransportNumberIndex Integer32,
|
|
lcsLMCTransportStatusServiceName DisplayString,
|
|
lcsLMCTransportStatusHttpRequests Counter64,
|
|
lcsLMCTransportStatusHttpRequestsErrors Counter64,
|
|
lcsLMCTransportStatusTXBytes Counter64,
|
|
lcsLMCTransportStatusRXBytes Counter64
|
|
}
|
|
|
|
lcsLMCTransportStatusTransportNumberIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { lcsLMCTransportStatusTableEntry 1 }
|
|
|
|
lcsLMCTransportStatusServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service name"
|
|
::= { lcsLMCTransportStatusTableEntry 2 }
|
|
|
|
lcsLMCTransportStatusHttpRequests OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Http requests"
|
|
::= { lcsLMCTransportStatusTableEntry 3 }
|
|
|
|
lcsLMCTransportStatusHttpRequestsErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Http request errors"
|
|
::= { lcsLMCTransportStatusTableEntry 4 }
|
|
|
|
lcsLMCTransportStatusTXBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of transmitted bytes"
|
|
::= { lcsLMCTransportStatusTableEntry 5 }
|
|
|
|
lcsLMCTransportStatusRXBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of received bytes"
|
|
::= { lcsLMCTransportStatusTableEntry 7 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsRolloutAgent OBJECT IDENTIFIER ::= { lcsConfiguration 1501 }
|
|
|
|
lcsRolloutAgentOperating OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rollout Agent Operating Switch
|
|
0:Disable
|
|
1:Enable
|
|
2:Only-Unconfigured"
|
|
::= { lcsRolloutAgent 1 }
|
|
|
|
lcsRolloutAgentActive OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rollout Agent Active
|
|
0:No
|
|
1:Yes
|
|
2:Deactivated"
|
|
::= { lcsRolloutAgent 100 }
|
|
|
|
lcsRolloutAgentLastRequestStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rollout Agent Last Request Status
|
|
0:NoError,
|
|
1:DnsError,
|
|
2:ProtocolError,
|
|
3:ConnectionError,
|
|
4:MissingOrInvalidConfig"
|
|
::= { lcsRolloutAgent 101 }
|
|
|
|
lcsRolloutAgentLastRequestTimestamp OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rollout Agent Last Request Timestamp"
|
|
::= { lcsRolloutAgent 102 }
|
|
|
|
lcsRolloutAgentActiveHeartbeatUrl OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Active Heartbeat Url"
|
|
::= { lcsRolloutAgent 103 }
|
|
|
|
lcsRolloutAgentActiveProjectId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rollout Agent Active Project ID"
|
|
::= { lcsRolloutAgent 104 }
|
|
|
|
lcsRolloutAgentActiveLocationId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rollout Agent Active Location ID"
|
|
::= { lcsRolloutAgent 105 }
|
|
|
|
lcsRolloutAgentActiveTan OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rollout Agent Active TAN"
|
|
::= { lcsRolloutAgent 106 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsSecurity OBJECT IDENTIFIER ::= { lcosSX 3 }
|
|
|
|
lcsIPSourceGuard OBJECT IDENTIFIER ::= { lcsSecurity 1 }
|
|
|
|
lcsIPSourceGuardConf OBJECT IDENTIFIER ::= { lcsIPSourceGuard 1 }
|
|
|
|
-- RowStatus Info: createAndGo, notReady not supported.
|
|
-- =======================================================================================================================
|
|
-- Textual Conventions for the LCS IP Source Guard Mib
|
|
-- =======================================================================================================================
|
|
--
|
|
-- lcsIPSourceGuard OBJECT IDENTIFIER ::= { lcsIPSourceGuardMIB 1 }
|
|
-- lcsIPSourceGuardConf OBJECT IDENTIFIER ::= { lcsIPSourceGuard 1 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsIPSourceGuard group
|
|
-- =======================================================================================================================
|
|
--lcsIPSourceGuardConf
|
|
|
|
lcsIPSourceGuardMode OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the Global IP Source Guard or disable the
|
|
Global IP Source Guard."
|
|
::= { lcsIPSourceGuardConf 1 }
|
|
|
|
lcsIPSourceGuardDynamicToStaticCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Translate all dynamic entries to static entries."
|
|
DEFVAL { noAction }
|
|
::= { lcsIPSourceGuardConf 2 }
|
|
|
|
--lcsIPSourceGuardPortConfigTable
|
|
|
|
lcsIPSourceGuardPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPSourceGuardPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Source Guard Port Configuration Table.
|
|
INDEX for this table is ifIndex which is
|
|
equivalent to the panel port number."
|
|
::= { lcsIPSourceGuardConf 3 }
|
|
|
|
lcsIPSourceGuardPortConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSIPSourceGuardPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Source Guard Port Configuration Entry."
|
|
INDEX { ifIndex }
|
|
::= { lcsIPSourceGuardPortConfigTable 1 }
|
|
|
|
LCSIPSourceGuardPortConfigEntry ::= SEQUENCE {
|
|
lcsIPSourceGuardPortConfigMode AdminMode,
|
|
lcsIPSourceGuardPortMaxDynamicClients Integer32
|
|
}
|
|
|
|
lcsIPSourceGuardPortConfigMode OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify IP Source Guard is enabled on which ports."
|
|
::= { lcsIPSourceGuardPortConfigEntry 2 }
|
|
|
|
lcsIPSourceGuardPortMaxDynamicClients OBJECT-TYPE
|
|
SYNTAX Integer32(0..2|99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the maximum number of dynamic clients that can
|
|
be learned on given port.
|
|
default: 99
|
|
0~2: Max Dynamic clients
|
|
99:Unlimited "
|
|
::= { lcsIPSourceGuardPortConfigEntry 3 }
|
|
|
|
--lcsIPSourceGuardStaticTable
|
|
|
|
lcsIPSourceGuardStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPSourceGuardStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Source Guard Static Table."
|
|
::= { lcsIPSourceGuard 2 }
|
|
|
|
lcsIPSourceGuardStaticEntry OBJECT-TYPE
|
|
SYNTAX LCSIPSourceGuardStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Source Guard Static Entry."
|
|
INDEX { lcsIPSourceGuardStaticIndex }
|
|
::= { lcsIPSourceGuardStaticTable 1 }
|
|
|
|
LCSIPSourceGuardStaticEntry ::= SEQUENCE {
|
|
lcsIPSourceGuardStaticSwitchIndex Integer32,
|
|
lcsIPSourceGuardStaticIndex Integer32,
|
|
lcsIPSourceGuardStaticPort Integer32,
|
|
lcsIPSourceGuardStaticVLANId Integer32,
|
|
lcsIPSourceGuardStaticIPAddress IpAddress,
|
|
-- lcsIPSourceGuardStaticIPMask IpAddress,
|
|
lcsIPSourceGuardStaticMACAddress DisplayString,
|
|
lcsIPSourceGuardStaticRowStatus RowStatus
|
|
}
|
|
|
|
lcsIPSourceGuardStaticSwitchIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Index."
|
|
::= { lcsIPSourceGuardStaticEntry 1 }
|
|
|
|
lcsIPSourceGuardStaticIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..28)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of table."
|
|
::= { lcsIPSourceGuardStaticEntry 2 }
|
|
|
|
lcsIPSourceGuardStaticPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of table.
|
|
range: 1 - port number."
|
|
::= { lcsIPSourceGuardStaticEntry 3 }
|
|
|
|
lcsIPSourceGuardStaticVLANId OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID, range: 1 - 4094."
|
|
::= { lcsIPSourceGuardStaticEntry 4 }
|
|
|
|
lcsIPSourceGuardStaticIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address allowed for doing IP source guard."
|
|
::= { lcsIPSourceGuardStaticEntry 5 }
|
|
|
|
-- lcsIPSourceGuardStaticIPMask OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "IP Mask allowed for doing IP source guard."
|
|
-- ::= { lcsIPSourceGuardStaticEntry 6 }
|
|
|
|
lcsIPSourceGuardStaticMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allowed Source MAC address, format: 0a 1b 2c 3d 4e 5f."
|
|
::= { lcsIPSourceGuardStaticEntry 7 }
|
|
|
|
lcsIPSourceGuardStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create/delete entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsIPSourceGuardStaticEntry 8 }
|
|
|
|
--lcsIPSourceGuardDynamicTable
|
|
|
|
lcsIPSourceGuardDynamicTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSIPSourceGuardDynamicEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Source Guard Dynamic Table."
|
|
::= { lcsIPSourceGuard 3 }
|
|
|
|
lcsIPSourceGuardDynamicEntry OBJECT-TYPE
|
|
SYNTAX LCSIPSourceGuardDynamicEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Source Guard Dynamic Entry."
|
|
INDEX { lcsIPSourceGuardDynamicIndex }
|
|
::= { lcsIPSourceGuardDynamicTable 1 }
|
|
|
|
LCSIPSourceGuardDynamicEntry ::= SEQUENCE {
|
|
lcsIPSourceGuardDynamicSwitchIndex Integer32,
|
|
lcsIPSourceGuardDynamicIndex Integer32,
|
|
lcsIPSourceGuardDynamicPort Integer32,
|
|
lcsIPSourceGuardDynamicVLANId Integer32,
|
|
lcsIPSourceGuardDynamicIPAddress IpAddress,
|
|
lcsIPSourceGuardDynamicMACAddress DisplayString
|
|
}
|
|
|
|
lcsIPSourceGuardDynamicSwitchIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Index."
|
|
::= { lcsIPSourceGuardDynamicEntry 1 }
|
|
|
|
lcsIPSourceGuardDynamicIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of table."
|
|
::= { lcsIPSourceGuardDynamicEntry 2 }
|
|
|
|
lcsIPSourceGuardDynamicPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The logical port for the settings."
|
|
::= { lcsIPSourceGuardDynamicEntry 3 }
|
|
|
|
lcsIPSourceGuardDynamicVLANId OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan id for the settings."
|
|
::= { lcsIPSourceGuardDynamicEntry 4 }
|
|
|
|
lcsIPSourceGuardDynamicIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allowed Source IP address."
|
|
::= { lcsIPSourceGuardDynamicEntry 5 }
|
|
|
|
lcsIPSourceGuardDynamicMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allowed Source MAC address."
|
|
::= { lcsIPSourceGuardDynamicEntry 6 }
|
|
-- =======================================================================================================================
|
|
lcsARPInspection OBJECT IDENTIFIER ::= { lcsSecurity 2 }
|
|
-- RowStatus Info: createAndGo, notReady not supported.
|
|
-- =======================================================================================================================
|
|
-- Textual Conventions for the lcs Arp Mib
|
|
-- =======================================================================================================================
|
|
--
|
|
lcsARP OBJECT IDENTIFIER ::= { lcsARPInspection 1 }
|
|
lcsARPConfig OBJECT IDENTIFIER ::= { lcsARP 1 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsARP group
|
|
-- =======================================================================================================================
|
|
--lcsARPConfig
|
|
|
|
lcsARPConfMode OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the Global ARP Inspection or disable the Global
|
|
ARP Inspection."
|
|
::= { lcsARPConfig 1 }
|
|
|
|
--lcsARPPortConfTable
|
|
|
|
lcsARPPortConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSARPPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Port Configuration Table."
|
|
::= { lcsARPConfig 3 }
|
|
|
|
lcsARPPortConfEntry OBJECT-TYPE
|
|
SYNTAX LCSARPPortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Port Configuration Entry."
|
|
INDEX { lcsARPPortConfPort }
|
|
::= { lcsARPPortConfTable 1 }
|
|
|
|
LCSARPPortConfEntry ::= SEQUENCE {
|
|
lcsARPPortConfPort Integer32,
|
|
lcsARPPortConfMode AdminMode,
|
|
lcsARPPortConfCheckVLAN AdminMode,
|
|
lcsARPPortConfLogType INTEGER
|
|
}
|
|
|
|
lcsARPPortConfPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number for which the configuration below applies.
|
|
range: 1 - port number."
|
|
::= { lcsARPPortConfEntry 1 }
|
|
|
|
lcsARPPortConfMode OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify ARP Inspection is enabled on which ports."
|
|
::= { lcsARPPortConfEntry 2 }
|
|
|
|
lcsARPPortConfCheckVLAN OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the setting of 'Check VLAN' is disabled, the log
|
|
type of ARP Inspection will refer to the port setting.
|
|
And the setting of 'Check VLAN' is enabled, the log type
|
|
of ARP Inspection will refer to the VLAN setting."
|
|
::= { lcsARPPortConfEntry 3 }
|
|
|
|
lcsARPPortConfLogType OBJECT-TYPE
|
|
SYNTAX INTEGER{none(0),deny(1),permit(2),all(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The log type of ARP Inspection will refer to the
|
|
port setting.
|
|
0: none,
|
|
1: deny,
|
|
2: permit,
|
|
3: all,
|
|
range: 0-3."
|
|
::= { lcsARPPortConfEntry 4 }
|
|
|
|
--lcsARPVlanConfig
|
|
|
|
lcsARPVlanConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSARPVlanConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Vlan Configuration Table."
|
|
::= { lcsARP 2 }
|
|
|
|
lcsARPVlanConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSARPVlanConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Vlan Configuration Entry."
|
|
INDEX { lcsARPVlanConfigVlan }
|
|
::= { lcsARPVlanConfigTable 1 }
|
|
|
|
LCSARPVlanConfigEntry ::= SEQUENCE {
|
|
lcsARPPortConfigIndex Integer32,
|
|
lcsARPVlanConfigVlan Integer32,
|
|
lcsARPVlanConfigLogType INTEGER,
|
|
lcsARPVlanConfigRowStatus RowStatus
|
|
}
|
|
|
|
lcsARPPortConfigIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Index of Vlan config Table"
|
|
::= { lcsARPVlanConfigEntry 1 }
|
|
|
|
lcsARPVlanConfigVlan OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify ARP Inspection is enabled on which VLANs.
|
|
range: 1 - 4094."
|
|
::= { lcsARPVlanConfigEntry 2 }
|
|
|
|
lcsARPVlanConfigLogType OBJECT-TYPE
|
|
SYNTAX INTEGER{none(0),deny(1),permit(2),all(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The log type also can be configured on per VLAN setting.
|
|
0: none,
|
|
1: deny,
|
|
2: permit,
|
|
3: all,
|
|
range: 0-3."
|
|
::= { lcsARPVlanConfigEntry 3 }
|
|
|
|
lcsARPVlanConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create/delete entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsARPVlanConfigEntry 4 }
|
|
|
|
--lcsARPStaticTable
|
|
|
|
lcsARPStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSARPStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Static Table."
|
|
::= { lcsARP 3 }
|
|
|
|
lcsARPStaticEntry OBJECT-TYPE
|
|
SYNTAX LCSARPStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Static Entry."
|
|
INDEX { lcsARPStaticIndex }
|
|
::= { lcsARPStaticTable 1 }
|
|
|
|
LCSARPStaticEntry ::= SEQUENCE {
|
|
lcsARPStaticSwitchIndex Integer32,
|
|
lcsARPStaticIndex Integer32,
|
|
lcsARPStaticPort Integer32,
|
|
lcsARPStaticVlanID Integer32,
|
|
lcsARPStaticMACAddress DisplayString,
|
|
lcsARPStaticIPAddress IpAddress,
|
|
lcsARPStaticRowStatus RowStatus
|
|
}
|
|
|
|
|
|
lcsARPStaticSwitchIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Index."
|
|
::= { lcsARPStaticEntry 1 }
|
|
|
|
lcsARPStaticIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of table."
|
|
::= { lcsARPStaticEntry 2 }
|
|
|
|
lcsARPStaticPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The logical port for the settings.
|
|
range: 1 - port number."
|
|
::= { lcsARPStaticEntry 3 }
|
|
|
|
lcsARPStaticVlanID OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan id for the settings.
|
|
range: 1-4094."
|
|
::= { lcsARPStaticEntry 4 }
|
|
|
|
lcsARPStaticMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allowed Source MAC address in ARP request packets."
|
|
::= { lcsARPStaticEntry 5 }
|
|
|
|
lcsARPStaticIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allowed Source IP address in ARP request packets."
|
|
::= { lcsARPStaticEntry 6 }
|
|
|
|
lcsARPStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is
|
|
used to create/delete entries. Any object in an entry of
|
|
this table may be modified while the value of the
|
|
corresponding instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsARPStaticEntry 7 }
|
|
|
|
--lcsARPDynamicTable
|
|
|
|
lcsARPDynamicTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSARPDynamicEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Dynamic Table."
|
|
::= { lcsARP 4 }
|
|
|
|
lcsARPDynamicEntry OBJECT-TYPE
|
|
SYNTAX LCSARPDynamicEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ARP Dynamic Entry."
|
|
INDEX { lcsARPDynamicIndex }
|
|
::= { lcsARPDynamicTable 1 }
|
|
|
|
LCSARPDynamicEntry ::= SEQUENCE {
|
|
lcsARPDynamicIndex Integer32,
|
|
lcsARPDynamicPort Integer32,
|
|
lcsARPDynamicVLANId Integer32,
|
|
lcsARPDynamicMACAddress MacAddress,
|
|
lcsARPDynamicIPAddress IpAddress,
|
|
lcsARPDynamicToStaticCmd INTEGER
|
|
}
|
|
|
|
lcsARPDynamicIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of table."
|
|
::= { lcsARPDynamicEntry 1 }
|
|
|
|
lcsARPDynamicPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Port Number for which the entries are displayed."
|
|
::= { lcsARPDynamicEntry 2 }
|
|
|
|
lcsARPDynamicVLANId OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN-ID in which the ARP traffic is permitted."
|
|
::= { lcsARPDynamicEntry 3 }
|
|
|
|
lcsARPDynamicMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User MAC address of the entry."
|
|
::= { lcsARPDynamicEntry 4 }
|
|
|
|
lcsARPDynamicIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User IP address of the entry."
|
|
::= { lcsARPDynamicEntry 5 }
|
|
|
|
lcsARPDynamicToStaticCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the Global ARP Inspection or disable the Global
|
|
ARP Inspection."
|
|
::= { lcsARPDynamicEntry 6 }
|
|
|
|
|
|
-- =======================================================================================================================
|
|
-- lcsARPConformance
|
|
-- =======================================================================================================================
|
|
lcsARPConformance OBJECT IDENTIFIER ::= { lcsARPInspection 200 }
|
|
|
|
lcsARPCompliances OBJECT IDENTIFIER ::= { lcsARPConformance 1 }
|
|
|
|
lcsARPGroups OBJECT IDENTIFIER ::= { lcsARPConformance 2 }
|
|
|
|
lcsARPGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- lcsARPConfig
|
|
lcsARPConfMode,
|
|
|
|
--lcsARPPortConfTable
|
|
lcsARPPortConfMode,
|
|
lcsARPPortConfCheckVLAN,
|
|
lcsARPPortConfLogType,
|
|
|
|
--lcsARPVlanConfig
|
|
lcsARPVlanConfigLogType,
|
|
lcsARPVlanConfigRowStatus,
|
|
|
|
--lcsARPStaticTable
|
|
lcsARPStaticPort,
|
|
lcsARPStaticVlanID,
|
|
lcsARPStaticMACAddress,
|
|
lcsARPStaticIPAddress,
|
|
lcsARPStaticRowStatus,
|
|
|
|
--lcsARPDynamicTable
|
|
lcsARPDynamicPort,
|
|
lcsARPDynamicVLANId,
|
|
lcsARPDynamicMACAddress,
|
|
lcsARPDynamicIPAddress,
|
|
lcsARPDynamicToStaticCmd
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to indicate
|
|
lcs ARP information."
|
|
::= { lcsARPGroups 1 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsDHCPSnooping OBJECT IDENTIFIER ::= { lcsSecurity 3 }
|
|
|
|
lcsDHCPSnoopingConf OBJECT IDENTIFIER ::= { lcsDHCPSnooping 1 }
|
|
|
|
lcsDHCPSnoopingMode OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: enable"
|
|
::= { lcsDHCPSnoopingConf 1 }
|
|
|
|
lcsDHCPSnoopingPortModeConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSDHCPSnoopingPortModeConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingConf 2 }
|
|
|
|
lcsDHCPSnoopingPortModeConfigurationEntry OBJECT-TYPE
|
|
SYNTAX LCSDHCPSnoopingPortModeConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsDHCPSnoopingPortModeConfigurationPort }
|
|
::= { lcsDHCPSnoopingPortModeConfigurationTable 1 }
|
|
|
|
LCSDHCPSnoopingPortModeConfigurationEntry ::= SEQUENCE {
|
|
lcsDHCPSnoopingPortModeConfigurationPort Integer32,
|
|
lcsDHCPSnoopingPortModeConfigurationMode Integer32
|
|
}
|
|
|
|
lcsDHCPSnoopingPortModeConfigurationPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingPortModeConfigurationEntry 1 }
|
|
|
|
lcsDHCPSnoopingPortModeConfigurationMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 1
|
|
0: trust port mode
|
|
1: untrust port mode"
|
|
::= { lcsDHCPSnoopingPortModeConfigurationEntry 2 }
|
|
|
|
lcsDHCPSnoopingStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSDHCPSnoopingStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnooping 2 }
|
|
|
|
lcsDHCPSnoopingStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LCSDHCPSnoopingStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsDHCPSnoopingStatisticsPort }
|
|
::= { lcsDHCPSnoopingStatisticsTable 1 }
|
|
|
|
LCSDHCPSnoopingStatisticsEntry ::= SEQUENCE {
|
|
lcsDHCPSnoopingStatisticsPort Integer32,
|
|
lcsDHCPSnoopingStatisticsClear Integer32,
|
|
lcsDHCPSnoopingRxDiscover Counter32,
|
|
lcsDHCPSnoopingRxOffer Counter32,
|
|
lcsDHCPSnoopingRxRequest Counter32,
|
|
lcsDHCPSnoopingRxDecline Counter32,
|
|
lcsDHCPSnoopingRxACK Counter32,
|
|
lcsDHCPSnoopingRxNAK Counter32,
|
|
lcsDHCPSnoopingRxRelease Counter32,
|
|
lcsDHCPSnoopingRxInform Counter32,
|
|
lcsDHCPSnoopingRxLeaseQuery Counter32,
|
|
lcsDHCPSnoopingRxLeaseUnassigned Counter32,
|
|
lcsDHCPSnoopingRxLeaseUnknown Counter32,
|
|
lcsDHCPSnoopingRxLeaseActive Counter32,
|
|
lcsDHCPSnoopingTxDiscover Counter32,
|
|
lcsDHCPSnoopingTxOffer Counter32,
|
|
lcsDHCPSnoopingTxRequest Counter32,
|
|
lcsDHCPSnoopingTxDecline Counter32,
|
|
lcsDHCPSnoopingTxACK Counter32,
|
|
lcsDHCPSnoopingTxNAK Counter32,
|
|
lcsDHCPSnoopingTxRelease Counter32,
|
|
lcsDHCPSnoopingTxInform Counter32,
|
|
lcsDHCPSnoopingTxLeaseQuery Counter32,
|
|
lcsDHCPSnoopingTxLeaseUnassigned Counter32,
|
|
lcsDHCPSnoopingTxLeaseUnknown Counter32,
|
|
lcsDHCPSnoopingTxLeaseActive Counter32,
|
|
lcsDHCPSnoopingRxDiscardedChecksumError Counter32,
|
|
lcsDHCPSnoopingRxDiscardedFromUntrusted Counter32
|
|
}
|
|
|
|
lcsDHCPSnoopingStatisticsPort OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 1 }
|
|
|
|
lcsDHCPSnoopingStatisticsClear OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: none
|
|
1: clear"
|
|
::= { lcsDHCPSnoopingStatisticsEntry 2 }
|
|
|
|
lcsDHCPSnoopingRxDiscover OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 3 }
|
|
|
|
lcsDHCPSnoopingRxOffer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 4 }
|
|
|
|
lcsDHCPSnoopingRxRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 5 }
|
|
|
|
lcsDHCPSnoopingRxDecline OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 6 }
|
|
|
|
lcsDHCPSnoopingRxACK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 7 }
|
|
|
|
lcsDHCPSnoopingRxNAK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 8 }
|
|
|
|
lcsDHCPSnoopingRxRelease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 9 }
|
|
|
|
lcsDHCPSnoopingRxInform OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 10 }
|
|
|
|
lcsDHCPSnoopingRxLeaseQuery OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 11 }
|
|
|
|
lcsDHCPSnoopingRxLeaseUnassigned OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 12 }
|
|
|
|
lcsDHCPSnoopingRxLeaseUnknown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 13 }
|
|
|
|
lcsDHCPSnoopingRxLeaseActive OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 14 }
|
|
|
|
lcsDHCPSnoopingTxDiscover OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 15 }
|
|
|
|
lcsDHCPSnoopingTxOffer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 16 }
|
|
|
|
lcsDHCPSnoopingTxRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 17 }
|
|
|
|
lcsDHCPSnoopingTxDecline OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 18 }
|
|
|
|
lcsDHCPSnoopingTxACK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 19 }
|
|
|
|
lcsDHCPSnoopingTxNAK OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 20 }
|
|
|
|
lcsDHCPSnoopingTxRelease OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 21 }
|
|
|
|
lcsDHCPSnoopingTxInform OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 22 }
|
|
|
|
lcsDHCPSnoopingTxLeaseQuery OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 23 }
|
|
|
|
lcsDHCPSnoopingTxLeaseUnassigned OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 24 }
|
|
|
|
lcsDHCPSnoopingTxLeaseUnknown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 25 }
|
|
|
|
lcsDHCPSnoopingTxLeaseActive OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 26 }
|
|
|
|
lcsDHCPSnoopingRxDiscardedChecksumError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 27 }
|
|
|
|
lcsDHCPSnoopingRxDiscardedFromUntrusted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPSnoopingStatisticsEntry 28 }
|
|
|
|
lcsDHCPRelay OBJECT IDENTIFIER ::= { lcsSecurity 4 }
|
|
|
|
lcsDHCPRelayConfiguration OBJECT IDENTIFIER ::= { lcsDHCPRelay 1 }
|
|
|
|
lcsDHCPRelayMode OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: enable
|
|
We need at least one server"
|
|
::= { lcsDHCPRelayConfiguration 1 }
|
|
|
|
lcsDHCPRelayServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayConfiguration 2 }
|
|
|
|
lcsDHCPRelayInformationMode OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: enable "
|
|
::= { lcsDHCPRelayConfiguration 3 }
|
|
|
|
lcsDHCPRelayInformationPolicy OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: replace
|
|
1: keep
|
|
2: drop "
|
|
::= { lcsDHCPRelayConfiguration 4 }
|
|
|
|
lcsDHCPRelayStatistics OBJECT IDENTIFIER ::= { lcsDHCPRelay 2 }
|
|
|
|
lcsDHCPRelayServerStatistics OBJECT IDENTIFIER ::= { lcsDHCPRelayStatistics 1 }
|
|
|
|
lcsServerStatTransmitToServer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 1 }
|
|
|
|
lcsServerStatTransmitError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 2 }
|
|
|
|
lcsServerStatReceiveFromServer OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 3 }
|
|
|
|
lcsServerStatReceiveMissingAgentOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 4 }
|
|
|
|
lcsServerStatReceiveMissingCircuitID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 5 }
|
|
|
|
lcsServerStatReceiveMissingRemoteID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 6 }
|
|
|
|
lcsServerStatReceiveBadCircuitID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 7 }
|
|
|
|
lcsServerStatReceiveBadRemoteID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayServerStatistics 8 }
|
|
|
|
lcsDHCPRelayClientStatistics OBJECT IDENTIFIER ::= { lcsDHCPRelayStatistics 2 }
|
|
|
|
lcsClientStatTransmitToClient OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayClientStatistics 1 }
|
|
|
|
lcsClientStatTransmitError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayClientStatistics 2 }
|
|
|
|
lcsClientStatReceivefromClient OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayClientStatistics 3 }
|
|
|
|
lcsClientStatReceiveAgentOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayClientStatistics 4 }
|
|
|
|
lcsClientStatReplaceAgentOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayClientStatistics 5 }
|
|
|
|
lcsClientStatKeepAgentOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayClientStatistics 6 }
|
|
|
|
lcsClientStatDropAgentOption OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsDHCPRelayClientStatistics 7 }
|
|
|
|
lcsPortSecurity OBJECT IDENTIFIER ::= { lcsSecurity 5 }
|
|
|
|
lcsPortSecLimitCtrl OBJECT IDENTIFIER ::= { lcsPortSecurity 1 }
|
|
|
|
lcsPortSecLimitCtrlSystemConf OBJECT IDENTIFIER ::= { lcsPortSecLimitCtrl 1 }
|
|
|
|
-- lcsPortSecurityMode OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0
|
|
-- 0: disable
|
|
-- 1: enable "
|
|
-- ::= { lcsPortSecLimitCtrlSystemConf 1 }
|
|
|
|
lcsPortSecurityAging OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: enable "
|
|
::= { lcsPortSecLimitCtrlSystemConf 1 }
|
|
|
|
lcsPortSecurityAgingPeriod OBJECT-TYPE
|
|
SYNTAX Integer32(10..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 3600, range: 10-10000000 "
|
|
::= { lcsPortSecLimitCtrlSystemConf 2 }
|
|
|
|
lcsPortSecurityHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32(10..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 300, range: 10-10000000 "
|
|
::= { lcsPortSecLimitCtrlSystemConf 3 }
|
|
|
|
lcsPortSecLimitCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPortSecLimitCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecLimitCtrl 2 }
|
|
|
|
lcsPortSecLimitCtrlEntry OBJECT-TYPE
|
|
SYNTAX LCSPortSecLimitCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPortSecLimitCtrlPort }
|
|
::= { lcsPortSecLimitCtrlTable 1 }
|
|
|
|
LCSPortSecLimitCtrlEntry ::= SEQUENCE {
|
|
lcsPortSecLimitCtrlPort Integer32,
|
|
lcsPortSecLimitCtrlPortMode Integer32,
|
|
lcsPortSecLimitCtrlPortLimit Integer32,
|
|
lcsPortSecLimitCtrlPortViolationmMode Integer32,
|
|
lcsPortSecLimitCtrlPortViolationmLimit Integer32,
|
|
lcsPortSecLimitCtrlPortState DisplayString,
|
|
lcsPortSecLimitCtrlPortReOpen Integer32,
|
|
lcsPortSecLimitCtrlPortSticky Integer32,
|
|
lcsPortSecLimitCtrlPortClear Integer32
|
|
}
|
|
|
|
lcsPortSecLimitCtrlPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecLimitCtrlEntry 1 }
|
|
|
|
lcsPortSecLimitCtrlPortMode OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: enable"
|
|
::= { lcsPortSecLimitCtrlEntry 2 }
|
|
|
|
lcsPortSecLimitCtrlPortLimit OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 4, range: 1-1024"
|
|
::= { lcsPortSecLimitCtrlEntry 3 }
|
|
|
|
lcsPortSecLimitCtrlPortViolationmMode OBJECT-TYPE
|
|
SYNTAX Integer32(0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: Protect
|
|
1: Restrict
|
|
2: Shutdown"
|
|
::= { lcsPortSecLimitCtrlEntry 4 }
|
|
|
|
lcsPortSecLimitCtrlPortViolationmLimit OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 4, range: 1-1024"
|
|
::= { lcsPortSecLimitCtrlEntry 5 }
|
|
|
|
|
|
lcsPortSecLimitCtrlPortState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecLimitCtrlEntry 6 }
|
|
|
|
lcsPortSecLimitCtrlPortReOpen OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: none
|
|
1: reopen"
|
|
::= { lcsPortSecLimitCtrlEntry 7 }
|
|
|
|
lcsPortSecLimitCtrlPortSticky OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: disable
|
|
1: enable"
|
|
::= { lcsPortSecLimitCtrlEntry 8 }
|
|
|
|
lcsPortSecLimitCtrlPortClear OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
1: clear"
|
|
::= { lcsPortSecLimitCtrlEntry 9 }
|
|
|
|
|
|
lcsPortSecSwitchStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPortSecSwitchStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecurity 2 }
|
|
|
|
lcsPortSecSwitchStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSPortSecSwitchStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPortSecSwitchStatusPort }
|
|
::= { lcsPortSecSwitchStatusTable 1 }
|
|
|
|
LCSPortSecSwitchStatusEntry ::= SEQUENCE {
|
|
lcsPortSecSwitchStatusPort Integer32,
|
|
-- lcsPortSecSwitchStatusUsers DisplayString,
|
|
lcsPortSecSwitchStatusViolationmMode DisplayString,
|
|
lcsPortSecSwitchStatusState DisplayString,
|
|
lcsPortSecSwitchStatusMACCountCurrent Integer32,
|
|
lcsPortSecSwitchStatusMACCountViolating Integer32,
|
|
lcsPortSecSwitchStatusMACCountLimit Integer32,
|
|
lcsPortSecSwitchStatusClear Integer32
|
|
}
|
|
|
|
lcsPortSecSwitchStatusPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecSwitchStatusEntry 1 }
|
|
|
|
-- lcsPortSecSwitchStatusUsers OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
|
|
-- '-' means that the corresponding user module is not enabled. "
|
|
-- ::= { lcsPortSecSwitchStatusEntry 2 }
|
|
|
|
lcsPortSecSwitchStatusViolationmMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the configured Violation Mode of the port."
|
|
::= { lcsPortSecSwitchStatusEntry 3 }
|
|
|
|
lcsPortSecSwitchStatusState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. "
|
|
::= { lcsPortSecSwitchStatusEntry 4 }
|
|
|
|
lcsPortSecSwitchStatusMACCountCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecSwitchStatusEntry 5 }
|
|
|
|
lcsPortSecSwitchStatusMACCountViolating OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecSwitchStatusEntry 6 }
|
|
|
|
lcsPortSecSwitchStatusMACCountLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecSwitchStatusEntry 7 }
|
|
|
|
lcsPortSecSwitchStatusClear OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove all MAC addresses on all VLANs on this port."
|
|
::= { lcsPortSecSwitchStatusEntry 8 }
|
|
|
|
lcsPortSecPortStatus OBJECT IDENTIFIER ::= { lcsPortSecurity 3 }
|
|
|
|
lcsPortSecPortStatusPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port number
|
|
default: 1
|
|
range: 1 - port number."
|
|
::= { lcsPortSecPortStatus 1 }
|
|
|
|
lcsPortSecPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSPortSecPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecPortStatus 2 }
|
|
|
|
lcsPortSecPortStatusEntry OBJECT-TYPE
|
|
SYNTAX LCSPortSecPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsPortSecPortStatusIndex }
|
|
::= { lcsPortSecPortStatusTable 1 }
|
|
|
|
LCSPortSecPortStatusEntry ::= SEQUENCE {
|
|
lcsPortSecPortStatusIndex Integer32,
|
|
lcsPortSecPortStatusMACAddress DisplayString,
|
|
lcsPortSecPortStatusVLANId Integer32,
|
|
lcsPortSecPortStatusState DisplayString,
|
|
lcsPortSecPortStatusAgeAndHold DisplayString,
|
|
lcsPortSecPortStatusClear Integer32
|
|
}
|
|
|
|
lcsPortSecPortStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecPortStatusEntry 1 }
|
|
|
|
lcsPortSecPortStatusMACAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address that is seen on this port."
|
|
::= { lcsPortSecPortStatusEntry 2 }
|
|
|
|
lcsPortSecPortStatusVLANId OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID that is seen on this port"
|
|
::= { lcsPortSecPortStatusEntry 3 }
|
|
|
|
lcsPortSecPortStatusState OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the corresponding MAC address is violating
|
|
(administrative user has configured the interface in Restrict mode and the MAC address is blocked),
|
|
blocked, or forwarding."
|
|
::= { lcsPortSecPortStatusEntry 4 }
|
|
|
|
lcsPortSecPortStatusAgeAndHold OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsPortSecPortStatusEntry 5 }
|
|
|
|
lcsPortSecPortStatusClear OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remove particular MAC addresses from MAC table
|
|
1:clear"
|
|
::= { lcsPortSecPortStatusEntry 6 }
|
|
|
|
lcsAccessManagement OBJECT IDENTIFIER ::= { lcsSecurity 6 }
|
|
|
|
lcsAccessMgmtConf OBJECT IDENTIFIER ::= { lcsAccessManagement 1 }
|
|
|
|
lcsAccessMgmtStatistics OBJECT IDENTIFIER ::= { lcsAccessManagement 2 }
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsAccessManagement group
|
|
-- =======================================================================================================================
|
|
--lcsAccessMgmtConf
|
|
|
|
lcsAccessMgmtConfMode OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the access management mode operation."
|
|
DEFVAL { disable }
|
|
::= { lcsAccessMgmtConf 1 }
|
|
|
|
--lcsAccessMgmtConfTable
|
|
|
|
lcsAccessMgmtConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSAccessMgmtConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Mgmt Conf Table. "
|
|
::= { lcsAccessMgmtConf 2 }
|
|
|
|
lcsAccessMgmtConfEntry OBJECT-TYPE
|
|
SYNTAX LCSAccessMgmtConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Mgmt Conf Entry "
|
|
INDEX { lcsAccessMgmtIndex }
|
|
::= { lcsAccessMgmtConfTable 1 }
|
|
|
|
LCSAccessMgmtConfEntry ::= SEQUENCE {
|
|
lcsAccessMgmtIndex Integer32,
|
|
lcsAccessMgmtVlanID Integer32,
|
|
lcsAccessMgmtStartIpAddress IpAddress,
|
|
lcsAccessMgmtEndIpAddress IpAddress,
|
|
lcsAccessMgmtHttpHttps AdminMode,
|
|
lcsAccessMgmtSNMP AdminMode,
|
|
lcsAccessMgmtTelnetSSH AdminMode,
|
|
lcsAccessMgmtRowStatus RowStatus
|
|
}
|
|
|
|
lcsAccessMgmtIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Management config index.
|
|
range : 1-16."
|
|
::= { lcsAccessMgmtConfEntry 1 }
|
|
|
|
lcsAccessMgmtVlanID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID for the access management entry.
|
|
range: 1-4094."
|
|
::= { lcsAccessMgmtConfEntry 2 }
|
|
|
|
lcsAccessMgmtStartIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start IP address for the access management
|
|
entry."
|
|
::= { lcsAccessMgmtConfEntry 3 }
|
|
|
|
lcsAccessMgmtEndIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end IP address for the access management
|
|
entry. "
|
|
::= { lcsAccessMgmtConfEntry 4 }
|
|
|
|
lcsAccessMgmtHttpHttps OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the host can access the switch from
|
|
HTTP/HTTPS interface if the host IP address matches the IP
|
|
address range provided in the entry."
|
|
DEFVAL { disable }
|
|
::= { lcsAccessMgmtConfEntry 5 }
|
|
|
|
lcsAccessMgmtSNMP OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the host can access the switch from SNMP
|
|
interface if the host IP address matches the IP address
|
|
range provided in the entry."
|
|
DEFVAL { disable }
|
|
::= { lcsAccessMgmtConfEntry 6 }
|
|
|
|
lcsAccessMgmtTelnetSSH OBJECT-TYPE
|
|
SYNTAX AdminMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the host can access the switch from
|
|
TELNET/SSH interface if the host IP address matches
|
|
the IP address range provided in the entry."
|
|
DEFVAL { disable }
|
|
::= { lcsAccessMgmtConfEntry 7 }
|
|
|
|
lcsAccessMgmtRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry, and is used
|
|
to create/delete entries. Any object in an entry of this
|
|
table may be modified while the value of the corresponding
|
|
instance of this object is active(1).
|
|
createAndGo, notReady not supported."
|
|
::= { lcsAccessMgmtConfEntry 8 }
|
|
|
|
--lcsAccessMgmtStatistics
|
|
|
|
lcsAccessMgmtStatisticsClear OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear all statistics."
|
|
::= { lcsAccessMgmtStatistics 1 }
|
|
|
|
--lcsAccessMgmtStatisticsTable
|
|
|
|
lcsAccessMgmtStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSAccessMgmtStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Mgmt Statistics Table. "
|
|
::= { lcsAccessMgmtStatistics 2 }
|
|
|
|
lcsAccessMgmtStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LCSAccessMgmtStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Mgmt Statistics Entry. "
|
|
INDEX { lcsAccessMgmtStatisticsInterface }
|
|
::= { lcsAccessMgmtStatisticsTable 1 }
|
|
|
|
LCSAccessMgmtStatisticsEntry ::= SEQUENCE {
|
|
lcsAccessMgmtStatisticsInterface INTEGER,
|
|
lcsAccessMgmtStatisticsReceivedPackets Integer32,
|
|
lcsAccessMgmtStatisticsAllowedPackets Integer32,
|
|
lcsAccessMgmtStatisticsDiscardedPackets Integer32
|
|
}
|
|
|
|
lcsAccessMgmtStatisticsInterface OBJECT-TYPE
|
|
SYNTAX INTEGER { http(1), https(2), snmp(3), telnet(4), ssh (5) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type through which the remote host can
|
|
access the switch.
|
|
1: HTTP,
|
|
2: HTTPs,
|
|
3: SNMP,
|
|
4: TELNET,
|
|
5: SSH"
|
|
::= { lcsAccessMgmtStatisticsEntry 1 }
|
|
|
|
lcsAccessMgmtStatisticsReceivedPackets OBJECT-TYPE
|
|
SYNTAX Integer32(1..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of received packets from the interface when
|
|
access management mode is enabled. "
|
|
::= { lcsAccessMgmtStatisticsEntry 2 }
|
|
|
|
lcsAccessMgmtStatisticsAllowedPackets OBJECT-TYPE
|
|
SYNTAX Integer32(1..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of allowed packets from the interface when
|
|
access management mode is enabled. "
|
|
::= { lcsAccessMgmtStatisticsEntry 3 }
|
|
|
|
lcsAccessMgmtStatisticsDiscardedPackets OBJECT-TYPE
|
|
SYNTAX Integer32(1..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of discarded packets from the interface when
|
|
access management mode is enabled. "
|
|
::= { lcsAccessMgmtStatisticsEntry 4 }
|
|
|
|
-- =======================================================================================================================
|
|
|
|
--lcsSSH OBJECT IDENTIFIER ::= { lcsSecurity 7 }
|
|
--
|
|
--lcsSSHMode OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 1
|
|
-- 0: disable
|
|
-- 1: enable"
|
|
-- ::= { lcsSSH 1 }
|
|
|
|
--lcsSSHPort OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "SSH service port number.
|
|
-- range : 1-65535, default : 22."
|
|
-- ::= { lcsSSH 2 }
|
|
|
|
lcsHTTPS OBJECT IDENTIFIER ::= { lcsSecurity 8 }
|
|
--
|
|
--lcsHTTPSMode OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 1
|
|
-- 0: disable
|
|
-- 1: enable"
|
|
-- ::= { lcsHTTPS 1 }
|
|
--
|
|
--lcsHTTPSAutoRedirect OBJECT-TYPE
|
|
-- SYNTAX Integer32(0|1)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "default: 0
|
|
-- 0: disable
|
|
-- 1: enable"
|
|
-- ::= { lcsHTTPS 2 }
|
|
--
|
|
--lcsHTTPSPort OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "HTTPS service port number.
|
|
-- range : 1-65535, default : 443."
|
|
-- ::= { lcsHTTPS 3 }
|
|
--
|
|
lcsHTTPSCertificateMaintain OBJECT-TYPE
|
|
SYNTAX Integer32(2..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"2: Upload
|
|
3: Generate"
|
|
::= { lcsHTTPS 4 }
|
|
|
|
lcsHTTPSCertificatePassPhrase OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the pass phrase in this field if your uploading certificate is protected by a specific passphrase."
|
|
::= { lcsHTTPS 5 }
|
|
|
|
lcsHTTPSCertificateUpload OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"default: 0
|
|
0: TFTP
|
|
1: URL"
|
|
::= { lcsHTTPS 6 }
|
|
|
|
lcsHTTPSFileUploadFileURL OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TFTP: filename
|
|
URL: URL"
|
|
::= { lcsHTTPS 7 }
|
|
|
|
lcsHTTPSFileUploadTFTPServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TFTP server IP address"
|
|
::= { lcsHTTPS 8 }
|
|
|
|
lcsHTTPSApply OBJECT-TYPE
|
|
SYNTAX Integer32(0|1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: apply the above https settings"
|
|
::= { lcsHTTPS 9 }
|
|
|
|
lcsHTTPSCertificateStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display the current status of certificate on the switch."
|
|
::= { lcsHTTPS 10 }
|
|
|
|
lcsAuthMethod OBJECT IDENTIFIER ::= { lcsSecurity 9 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Start lcsAuthMethodConfig group
|
|
-- =======================================================================================================================
|
|
--lcsAuthMethodConfigTable
|
|
|
|
lcsAuthMethodConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSAuthMethodConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Auth Method Config Table."
|
|
::= { lcsAuthMethod 1 }
|
|
|
|
lcsAuthMethodConfigEntry OBJECT-TYPE
|
|
SYNTAX LCSAuthMethodConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Auth Method Config Entry."
|
|
INDEX { lcsAuthMethodConfigClient }
|
|
::= { lcsAuthMethodConfigTable 1 }
|
|
|
|
LCSAuthMethodConfigEntry ::= SEQUENCE {
|
|
lcsAuthMethodConfigClient INTEGER,
|
|
lcsAuthMethodConfigMethod1 INTEGER,
|
|
lcsAuthMethodConfigMethod2 INTEGER,
|
|
lcsAuthMethodConfigMethod3 INTEGER,
|
|
lcsAuthMethodConfigMethod4 INTEGER,
|
|
lcsAuthMethodConfigServicePort Integer32
|
|
}
|
|
|
|
lcsAuthMethodConfigClient OBJECT-TYPE
|
|
SYNTAX INTEGER { console ( 1 ),
|
|
telnet ( 2 ),
|
|
ssh ( 3 ),
|
|
http ( 4 ),
|
|
https ( 5 )
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: console.
|
|
2: telnet.
|
|
3: ssh.
|
|
4: http.
|
|
5: https. "
|
|
::= { lcsAuthMethodConfigEntry 1 }
|
|
|
|
lcsAuthMethodConfigMethod1 OBJECT-TYPE
|
|
SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Methods that involves remote servers are timed out if the
|
|
remote servers are offline.Each method is tried from left to
|
|
right and continues until a method either approves or
|
|
rejects a user.
|
|
0: no, Authentication is disabled and login is not possible.
|
|
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
|
|
2: local, Use the local user database on the switch for
|
|
authentication.
|
|
3: radius, Use remote RADIUS server(s) for authentication.
|
|
4: tacacs+, Use remote TACACS+ server(s) for authentication."
|
|
::= { lcsAuthMethodConfigEntry 2 }
|
|
|
|
lcsAuthMethodConfigMethod2 OBJECT-TYPE
|
|
SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Methods that involves remote servers are timed out if the
|
|
remote servers are offline.Each method is tried from left to
|
|
right and continues until a method either approves or
|
|
rejects a user.
|
|
0: no, Authentication is disabled and login is not possible.
|
|
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
|
|
2: local, Use the local user database on the switch for
|
|
authentication.
|
|
3: radius, Use remote RADIUS server(s) for authentication.
|
|
4: tacacs+, Use remote TACACS+ server(s) for authentication."
|
|
::= { lcsAuthMethodConfigEntry 3 }
|
|
|
|
lcsAuthMethodConfigMethod3 OBJECT-TYPE
|
|
SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Methods that involves remote servers are timed out if the
|
|
remote servers are offline.Each method is tried from left to
|
|
right and continues until a method either approves or
|
|
rejects a user.
|
|
0: no, Authentication is disabled and login is not possible.
|
|
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
|
|
2: local, Use the local user database on the switch for
|
|
authentication.
|
|
3: radius, Use remote RADIUS server(s) for authentication.
|
|
4: tacacs+, Use remote TACACS+ server(s) for authentication."
|
|
::= { lcsAuthMethodConfigEntry 4 }
|
|
|
|
lcsAuthMethodConfigMethod4 OBJECT-TYPE
|
|
SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Methods that involves remote servers are timed out if the
|
|
remote servers are offline.Each method is tried from left to
|
|
right and continues until a method either approves or
|
|
rejects a user.
|
|
0: no, Authentication is disabled and login is not possible.
|
|
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
|
|
2: local, Use the local user database on the switch for
|
|
authentication.
|
|
3: radius, Use remote RADIUS server(s) for authentication.
|
|
4: tacacs+, Use remote TACACS+ server(s) for authentication."
|
|
::= { lcsAuthMethodConfigEntry 5 }
|
|
|
|
lcsAuthMethodConfigServicePort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network port number this client bound to provide service."
|
|
::= { lcsAuthMethodConfigEntry 6 }
|
|
|
|
lcsCommandAuthorizationMethodTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSCommandAuthorizationMethodEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Command Authorized Method Config Table."
|
|
::= { lcsAuthMethod 2 }
|
|
|
|
lcsCommandAuthorizationMethodEntry OBJECT-TYPE
|
|
SYNTAX LCSCommandAuthorizationMethodEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Command Authorized Method Config Entry."
|
|
INDEX { lcsCommandAuthorizationMethodClient }
|
|
::= { lcsCommandAuthorizationMethodTable 1 }
|
|
|
|
LCSCommandAuthorizationMethodEntry ::= SEQUENCE {
|
|
lcsCommandAuthorizationMethodClient INTEGER,
|
|
lcsCommandAuthorizationMethodMethod Integer32,
|
|
lcsCommandAuthorizationMethodCmdLvl Integer32,
|
|
lcsCommandAuthorizationMethodCfgCmd Integer32
|
|
}
|
|
|
|
lcsCommandAuthorizationMethodClient OBJECT-TYPE
|
|
SYNTAX INTEGER { console ( 1 ),
|
|
telnet ( 2 ),
|
|
ssh ( 3 ),
|
|
http ( 4 ),
|
|
https ( 5 )
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: console.
|
|
2: telnet.
|
|
3: ssh.
|
|
4: http.
|
|
5: https. "
|
|
::= { lcsCommandAuthorizationMethodEntry 1 }
|
|
|
|
lcsCommandAuthorizationMethodMethod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Method can be set to one of the following values:
|
|
0:no: Command authorization is disabled.
|
|
User is granted access to CLI commands according to his privilege level.
|
|
4:tacacs: Use remote TACACS+ server(s) for command authorization.
|
|
If all remote servers are offline, the user is granted access to CLI commands
|
|
according to his privilege level."
|
|
::= { lcsCommandAuthorizationMethodEntry 2 }
|
|
|
|
lcsCommandAuthorizationMethodCmdLvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authorize all commands with a privilege level higher than or equal to this level.
|
|
Valid values are in the range 0 to 15."
|
|
::= { lcsCommandAuthorizationMethodEntry 3 }
|
|
|
|
lcsCommandAuthorizationMethodCfgCmd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Also authorize configuration commands.
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsCommandAuthorizationMethodEntry 4 }
|
|
|
|
|
|
lcsAccountingMethodTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSAccountingMethodEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Accounting Method Config Table."
|
|
::= { lcsAuthMethod 3 }
|
|
|
|
lcsAccountingMethodEntry OBJECT-TYPE
|
|
SYNTAX LCSAccountingMethodEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Accounting Method Config Entry."
|
|
INDEX { lcsAccountingMethodClient }
|
|
::= { lcsAccountingMethodTable 1 }
|
|
|
|
LCSAccountingMethodEntry ::= SEQUENCE {
|
|
lcsAccountingMethodClient INTEGER,
|
|
lcsAccountingMethodMethod Integer32,
|
|
lcsAccountingMethodCmdLvl Integer32,
|
|
lcsAccountingMethodCfgCmd Integer32
|
|
}
|
|
|
|
lcsAccountingMethodClient OBJECT-TYPE
|
|
SYNTAX INTEGER { console ( 1 ),
|
|
telnet ( 2 ),
|
|
ssh ( 3 ),
|
|
http ( 4 ),
|
|
https ( 5 )
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: console.
|
|
2: telnet.
|
|
3: ssh.
|
|
4: http.
|
|
5: https. "
|
|
::= { lcsAccountingMethodEntry 1 }
|
|
|
|
lcsAccountingMethodMethod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Method can be set to one of the following values:
|
|
0:no: Accounting is disabled.
|
|
4:tacacs: Use remote TACACS+ server(s) for accounting."
|
|
::= { lcsAccountingMethodEntry 2 }
|
|
|
|
lcsAccountingMethodCmdLvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable accounting of all commands with a privilege level higher than or equal to this level.
|
|
Valid values are in the range 0 to 15. Leave the field empty to disable command accounting."
|
|
::= { lcsAccountingMethodEntry 3 }
|
|
|
|
lcsAccountingMethodCfgCmd OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable exec (login) accounting.
|
|
0:Disable
|
|
1:Enable"
|
|
::= { lcsAccountingMethodEntry 4 }
|
|
|
|
-- lcsTELNET OBJECT IDENTIFIER ::= { lcsSecurity 10 }
|
|
|
|
-- lcsTELNETPort OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "TELNET service port number.
|
|
-- range : 1-65535, default : 23."
|
|
-- ::= { lcsTELNET 1 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsMaintenance OBJECT IDENTIFIER ::= { lcosSX 4 }
|
|
|
|
lcsSoftware OBJECT IDENTIFIER ::= { lcsMaintenance 3 }
|
|
lcsConfig OBJECT IDENTIFIER ::= { lcsMaintenance 4 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Objects in the lcsMaintenance Group
|
|
-- =======================================================================================================================
|
|
lcsRestartDevice OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Command to restart the device."
|
|
DEFVAL { noAction }
|
|
::= { lcsMaintenance 1 }
|
|
|
|
lcsFactoryDefaults OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the configuration to Factory Defaults keep-ip."
|
|
DEFVAL { noAction }
|
|
::= { lcsMaintenance 2 }
|
|
|
|
--lcsSoftware
|
|
|
|
lcsSoftwareUsername OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the username for 'tftp' firmware upgrading."
|
|
::= { lcsSoftware 1 }
|
|
|
|
lcsSoftwarePassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the password for 'tftp' firmware upgrading."
|
|
::= { lcsSoftware 2 }
|
|
|
|
lcsSoftwareIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the firmware tftp server."
|
|
::= { lcsSoftware 3 }
|
|
|
|
lcsSoftwareFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the path and filename for firmware upgrading."
|
|
::= { lcsSoftware 4 }
|
|
|
|
lcsSoftwareUpgradeCmd OBJECT-TYPE
|
|
SYNTAX INTEGER { noAction ( 0 ),
|
|
tftpUpgrade ( 1 ),
|
|
ftpUpgrade ( 2 )
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Firmware upgrade command.
|
|
noAction(0 )- do nothing (read only).
|
|
tftpUpgrade (1) - activate 'tftp' firmware upgrade"
|
|
|
|
DEFVAL { noAction }
|
|
::= { lcsSoftware 5 }
|
|
|
|
lcsSoftwareImageSelectionCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Activate firmware image selection.
|
|
noAction(0) - do nothing - returned upon get.
|
|
activate(1) - activate firmware image selection."
|
|
DEFVAL { noAction }
|
|
::= { lcsSoftware 6 }
|
|
|
|
lcsSaveStartCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This copies running-config to startup-config,
|
|
thereby ensuring that the currently active
|
|
configuration will be used at the next reboot. "
|
|
DEFVAL { noAction }
|
|
::= { lcsConfig 1 }
|
|
|
|
lcsConfigUsername OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the username for 'tftp' 'upload config' or 'download config'."
|
|
::= { lcsConfig 2 }
|
|
|
|
lcsConfigPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the password for 'tftp' 'upload config' or 'download config'."
|
|
::= { lcsConfig 3 }
|
|
|
|
lcsConfigIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the IP address for 'tftp' 'upload config'
|
|
or 'download config'."
|
|
::= { lcsConfig 4 }
|
|
|
|
lcsConfigFilename OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Get/Set the filename in switch for 'tftp'
|
|
'upload config' or 'download config'."
|
|
::= { lcsConfig 5 }
|
|
|
|
lcsConfigFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSConfigFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The config file tabe."
|
|
::= { lcsConfig 6 }
|
|
|
|
lcsConfigFileEntry OBJECT-TYPE
|
|
SYNTAX LCSConfigFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"an entry in the config file tabe."
|
|
INDEX { lcsConfigFileIndex }
|
|
::= { lcsConfigFileTable 1 }
|
|
|
|
LCSConfigFileEntry ::= SEQUENCE {
|
|
lcsConfigFileIndex Integer32,
|
|
lcsShowConfigFileName DisplayString,
|
|
lcsActivateConfigCmd ActivateCmd,
|
|
lcsDeleteConfigCmd ActivateCmd,
|
|
lcsUploadConfigCmd INTEGER,
|
|
lcsDownloadConfigCmd INTEGER
|
|
}
|
|
|
|
lcsConfigFileIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The config file index."
|
|
::= { lcsConfigFileEntry 1 }
|
|
|
|
lcsShowConfigFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the config file name. Without config filename:'NewConfig'
|
|
is temp file when 'activate download
|
|
config' can 'create new file' and 'change create filename'."
|
|
::= { lcsConfigFileEntry 2 }
|
|
|
|
lcsActivateConfigCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Activate config command.
|
|
noAction(0) : do nothing (read only).
|
|
activate(1) : activate the config"
|
|
DEFVAL { noAction }
|
|
::= { lcsConfigFileEntry 3 }
|
|
|
|
lcsDeleteConfigCmd OBJECT-TYPE
|
|
SYNTAX ActivateCmd
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delete config command.
|
|
noAction(0) : do nothing (read only).
|
|
activate(1) : delete the config"
|
|
DEFVAL { noAction }
|
|
::= { lcsConfigFileEntry 4 }
|
|
|
|
lcsDownloadConfigCmd OBJECT-TYPE
|
|
SYNTAX INTEGER { noAction ( 0 ),
|
|
tftpUpload ( 1 )
|
|
--ftpUpload ( 2 )
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Download config command.
|
|
noAction (0) - do nothing (read only).
|
|
tftpUpload (1) - activate 'tftp' config download."
|
|
DEFVAL { noAction }
|
|
::= { lcsConfigFileEntry 5 }
|
|
|
|
lcsUploadConfigCmd OBJECT-TYPE
|
|
SYNTAX INTEGER { noAction ( 0 ),
|
|
tftpDownload ( 1 )
|
|
--ftpDownload ( 2 )
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upload config command.
|
|
noAction (0) - do nothing (read only).
|
|
tftpDownload (1) - activate 'tftp' config upload.
|
|
For merge/replace running-config:
|
|
1:merge
|
|
3:replace"
|
|
DEFVAL { noAction }
|
|
::= { lcsConfigFileEntry 6 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsDiagnostics OBJECT IDENTIFIER ::= { lcsMaintenance 5 }
|
|
|
|
lcsPingIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The destination IP Address. "
|
|
::= { lcsDiagnostics 1 }
|
|
|
|
lcsPingSize OBJECT-TYPE
|
|
SYNTAX Integer32(60..1400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Size of ICMP echo packet.
|
|
range : 60-1400, default : 64. "
|
|
::= { lcsDiagnostics 2 }
|
|
|
|
lcsDoPingConfig OBJECT-TYPE
|
|
SYNTAX Integer32(1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Do ping-config.
|
|
Get this OID always return zero.
|
|
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
|
|
to elicit an ICMP ECHO_RESPONSE from a host or gateway. "
|
|
::= { lcsDiagnostics 3 }
|
|
|
|
lcsPingResult OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show ping result. "
|
|
::= { lcsDiagnostics 4 }
|
|
|
|
lcsPing6IpAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The destination IPv6 Address. "
|
|
::= { lcsDiagnostics 5 }
|
|
|
|
lcsPing6Size OBJECT-TYPE
|
|
SYNTAX Integer32(60..1400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Size of ICMP echo packet.
|
|
range : 60-1400. "
|
|
::= { lcsDiagnostics 6 }
|
|
|
|
lcsPing6EgressInterface OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID (VID) of the specific egress IPv6 interface which ICMP packet goes."
|
|
::= { lcsDiagnostics 7 }
|
|
|
|
lcsDoPing6Config OBJECT-TYPE
|
|
SYNTAX Integer32(1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Do ping-config.
|
|
Get this OID always return zero.
|
|
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
|
|
to elicit an ICMP ECHO_RESPONSE from a host or gateway. "
|
|
::= { lcsDiagnostics 8 }
|
|
|
|
lcsPing6Result OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show ping result. "
|
|
::= { lcsDiagnostics 9 }
|
|
|
|
lcstracerouteIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The destination IP Address. "
|
|
::= { lcsDiagnostics 10 }
|
|
|
|
--lcstracerouteProtocol OBJECT-TYPE
|
|
-- SYNTAX Integer32(0..2)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " Specify protocol including icmp=0, udp=1 and tcp=2.
|
|
-- range : 0-2, default : 0. "
|
|
-- ::= { lcsDiagnostics 11 }
|
|
|
|
lcstracerouteWaittime OBJECT-TYPE
|
|
SYNTAX Integer32(1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specify wait time for waiting probe packets come back.
|
|
range : 1-60(sec), default : 5(sec). "
|
|
::= { lcsDiagnostics 12 }
|
|
|
|
lcstracerouteMaxTTL OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specify max TTL.
|
|
range : 1-255, default : 30. "
|
|
::= { lcsDiagnostics 13 }
|
|
|
|
lcstracerouteNqueries OBJECT-TYPE
|
|
SYNTAX Integer32(1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Specify number of probe packets.
|
|
range : 1-10, default : 3. "
|
|
::= { lcsDiagnostics 14 }
|
|
|
|
lcsDotracerouteConfig OBJECT-TYPE
|
|
SYNTAX Integer32(1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Do traceroute-config.
|
|
Get this OID always return zero.
|
|
1 - ping. Uses the traceroute program to get
|
|
ip address of the middle gateway. "
|
|
::= { lcsDiagnostics 15 }
|
|
|
|
lcstracerouteResult OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Show traceroute result. "
|
|
::= { lcsDiagnostics 16 }
|
|
|
|
lcsCableDiagnostics OBJECT IDENTIFIER ::= { lcsDiagnostics 17 }
|
|
|
|
lcsCableDiagnosticsTest OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Run Cable Diagnostics.
|
|
port, range : 1 - port number."
|
|
::= { lcsCableDiagnostics 1 }
|
|
|
|
lcsCableDiagnosticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSCableDiagnosticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { lcsCableDiagnostics 2 }
|
|
|
|
lcsCableDiagnosticsEntry OBJECT-TYPE
|
|
SYNTAX LCSCableDiagnosticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsCableDiagnosticsPort }
|
|
::= { lcsCableDiagnosticsTable 1 }
|
|
|
|
LCSCableDiagnosticsEntry ::= SEQUENCE {
|
|
lcsCableDiagnosticsPort Integer32,
|
|
lcsCableDiagnosticsLinkStatus DisplayString,
|
|
lcsCableDiagnosticsTestResult DisplayString,
|
|
lcsCableDiagnosticsLength DisplayString
|
|
}
|
|
|
|
lcsCableDiagnosticsPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..52)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port index"
|
|
::= { lcsCableDiagnosticsEntry 1 }
|
|
|
|
lcsCableDiagnosticsLinkStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the cable."
|
|
::= { lcsCableDiagnosticsEntry 2 }
|
|
|
|
lcsCableDiagnosticsTestResult OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test Result of the cable."
|
|
::= { lcsCableDiagnosticsEntry 3 }
|
|
|
|
lcsCableDiagnosticsLength OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length (in meters) of the cable."
|
|
::= { lcsCableDiagnosticsEntry 4 }
|
|
|
|
lcsSwitchRebootSchedule OBJECT IDENTIFIER ::= { lcsMaintenance 6 }
|
|
|
|
lcsSwitchRebootMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Reboot Mode.
|
|
0:disable
|
|
1:enable"
|
|
::= { lcsSwitchRebootSchedule 1 }
|
|
|
|
lcsSwitchRebootTimeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LCSSwitchRebootTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Configure the Switch reboot time. "
|
|
::= { lcsSwitchRebootSchedule 2 }
|
|
|
|
lcsSwitchRebootTimeEntry OBJECT-TYPE
|
|
SYNTAX LCSSwitchRebootTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
INDEX { lcsSwitchRebootWeekIndex }
|
|
::= { lcsSwitchRebootTimeTable 1 }
|
|
|
|
LCSSwitchRebootTimeEntry ::= SEQUENCE {
|
|
lcsSwitchRebootWeekIndex Integer32,
|
|
lcsSwitchRebootTimeHour Integer32,
|
|
lcsSwitchRebootTimeMinute Integer32
|
|
}
|
|
|
|
lcsSwitchRebootWeekIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch reboot week index.
|
|
1: Sun, 2: Mon, 3:Tue, 4: Wed, 5: Thu, 6: Fri, 7: Sat"
|
|
::= { lcsSwitchRebootTimeEntry 1 }
|
|
|
|
lcsSwitchRebootTimeHour OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..23)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Reboot Time (Hour). Range: 0-23.
|
|
-1:disable"
|
|
::= { lcsSwitchRebootTimeEntry 2 }
|
|
|
|
lcsSwitchRebootTimeMinute OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..55)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch Reboot Time (Minute). Range:0,5,10,...,55.
|
|
-1:disable"
|
|
::= { lcsSwitchRebootTimeEntry 3 }
|
|
|
|
lcsiPerf OBJECT IDENTIFIER ::= { lcsMaintenance 7 }
|
|
|
|
lcsiPerfMethod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The measuring method of iPerf.
|
|
2:iPerf version 2
|
|
3:iPerf version 3"
|
|
::= { lcsiPerf 2 }
|
|
|
|
lcsiPerfHost OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of iPerf server. "
|
|
::= { lcsiPerf 3 }
|
|
|
|
lcsiPerfPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The listen port of iPerf server. The default value is 5001 for iPerf, 5201 for iPerf3. "
|
|
::= { lcsiPerf 4 }
|
|
|
|
lcsiPerfTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in seconds to transmit for (default 10 secs). "
|
|
::= { lcsiPerf 5 }
|
|
|
|
lcsiPerfInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time in seconds between periodic bandwidth reports (default no periodic reports). "
|
|
::= { lcsiPerf 6 }
|
|
|
|
lcsiPerfTTL OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live, for multicast (default 1). "
|
|
::= { lcsiPerf 7 }
|
|
|
|
lcsiPerfStart OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start iPerf
|
|
1:Start."
|
|
::= { lcsiPerf 8 }
|
|
|
|
lcsiPerfResult OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test result of iPerf"
|
|
::= { lcsiPerf 9 }
|
|
|
|
-- =======================================================================================================================
|
|
lcsTrap OBJECT IDENTIFIER ::= { lcosSX 5 }
|
|
|
|
lcsTrapEvent OBJECT IDENTIFIER ::= { lcsTrap 1 }
|
|
|
|
lcsEmergency NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Emergency. Emergency conditions."
|
|
::= { lcsTrapEvent 1 }
|
|
|
|
lcsAlert NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Alert. Alert conditions."
|
|
::= { lcsTrapEvent 2 }
|
|
|
|
lcsCritical NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Critical. Critical conditions."
|
|
::= { lcsTrapEvent 3 }
|
|
|
|
lcsError NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Error. Error conditions."
|
|
::= { lcsTrapEvent 4 }
|
|
|
|
lcsWarning NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Warning. Warning conditions."
|
|
::= { lcsTrapEvent 5 }
|
|
|
|
lcsNotice NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Notice. Notice conditions."
|
|
::= { lcsTrapEvent 6 }
|
|
|
|
lcsInformational NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Informational. Informational conditions."
|
|
::= { lcsTrapEvent 7 }
|
|
|
|
lcsDebug NOTIFICATION-TYPE
|
|
OBJECTS { lcsInformation }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The severity level is Debug. Debug conditions."
|
|
::= { lcsTrapEvent 8 }
|
|
|
|
lcsTrapVariable OBJECT IDENTIFIER ::= { lcsTrap 2 }
|
|
|
|
lcsInformation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap information."
|
|
::= { lcsTrapVariable 1 }
|
|
|
|
lcsMacTrap OBJECT IDENTIFIER ::= { lcsTrap 100 }
|
|
|
|
lcsMacTrapEvent OBJECT IDENTIFIER ::= { lcsMacTrap 1 }
|
|
|
|
lcsMacTrapAddNotification NOTIFICATION-TYPE
|
|
OBJECTS { dot1qTpFdbAddress,
|
|
dot1qFdbId,
|
|
dot1qTpFdbPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Event generated for a new learned mac address.
|
|
dot1qTpFdbAddress: The mac address.
|
|
dot1qFdbId: The VLAN ID.
|
|
dot1qTpFdbPort: The port the mac address was learned on."
|
|
::= { lcsMacTrapEvent 1 }
|
|
|
|
lcsMacTrapDelNotification NOTIFICATION-TYPE
|
|
OBJECTS { dot1qTpFdbAddress,
|
|
dot1qFdbId,
|
|
dot1qTpFdbPort,
|
|
lcsMacTrapVarDelReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Event generated for a deleted mac address.
|
|
dot1qTpFdbAddress: The mac address.
|
|
dot1qFdbId: The VLAN ID.
|
|
dot1qTpFdbPort: The port the mac address was known on."
|
|
::= { lcsMacTrapEvent 2 }
|
|
|
|
lcsMacTrapVars OBJECT IDENTIFIER ::= { lcsMacTrap 2 }
|
|
|
|
lcsMacTrapVarDelReason OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual reason for deletion of a mac address."
|
|
::= { lcsMacTrapVars 1 }
|
|
|
|
--
|
|
-- =======================================================================================================================
|
|
-- Objects in the lcsProducts Group
|
|
-- =======================================================================================================================
|
|
-- Each device type has a unique OID with which it can be identified.
|
|
-- The OID has to be in the sysObjectID to identify the device type!
|
|
-- =======================================================================================================================
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8
|
|
lcsProducts OBJECT IDENTIFIER ::= { lcosSX 8 }
|
|
|
|
-- =======================================================================================================================
|
|
-- List of OIDs used in the sysObjectID to identify the device type
|
|
-- =======================================================================================================================
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3152
|
|
lcsProductsGS3152X OBJECT IDENTIFIER ::= { lcsProducts 3152 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3153
|
|
lcsProductsGS3152XP OBJECT IDENTIFIER ::= { lcsProducts 3153 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3154
|
|
lcsProductsGS3152XSP OBJECT IDENTIFIER ::= { lcsProducts 3154 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3155
|
|
lcsProductsGS3152P OBJECT IDENTIFIER ::= { lcsProducts 3155 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3528
|
|
lcsProductsGS3528XSP OBJECT IDENTIFIER ::= { lcsProducts 3528 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3128
|
|
lcsProductsGS3128X OBJECT IDENTIFIER ::= { lcsProducts 3128 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3129
|
|
lcsProductsGS3128XP OBJECT IDENTIFIER ::= { lcsProducts 3129 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3529
|
|
lcsProductsGS3528XP OBJECT IDENTIFIER ::= { lcsProducts 3529 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3530
|
|
lcsProductsGS3528X OBJECT IDENTIFIER ::= { lcsProducts 3530 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3126
|
|
lcsProductsGS3126X OBJECT IDENTIFIER ::= { lcsProducts 3126 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3127
|
|
lcsProductsGS3126XP OBJECT IDENTIFIER ::= { lcsProducts 3127 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3510
|
|
lcsProductsGS3510XP OBJECT IDENTIFIER ::= { lcsProducts 3510 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3511
|
|
lcsProductsGS3510X OBJECT IDENTIFIER ::= { lcsProducts 3511 }
|
|
|
|
-- {NODE} 1.3.6.1.4.1.2356.14.8.3531
|
|
lcsProductsGS3528XUP OBJECT IDENTIFIER ::= { lcsProducts 3531 }
|
|
|
|
-- In the future, enter the OID of a new device type here.
|
|
|
|
END
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|