WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/juniper/EX2500-BASE-MIB

15312 lines
492 KiB
Plaintext
Raw Permalink Blame History

-- MIB definitions for Juniper Networks ex2500 Private MIBs
-- ----------------------------------------------------------------------------
-- { INSERT: bosRootDefs
-- ----------------------------------------------------------------------------
EX2500-BASE-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY,
enterprises, Integer32, Unsigned32, Counter32, Gauge32, Counter64,
TimeTicks, IpAddress, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, DisplayString, PhysAddress,
MacAddress, RowStatus, TimeInterval, TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
BridgeId, dot1dTp, dot1dTpPort, dot1dBridge, dot1dBasePortEntry,
dot1dBasePort
FROM BRIDGE-MIB
EnabledStatus
FROM P-BRIDGE-MIB
PortList
FROM Q-BRIDGE-MIB
SnmpAdminString, SnmpEngineID,SnmpMessageProcessingModel,
SnmpSecurityModel,SnmpSecurityLevel FROM SNMP-FRAMEWORK-MIB
usmNoAuthProtocol, usmNoPrivProtocol FROM SNMP-USER-BASED-SM-MIB
sysName, sysLocation, sysContact, ifIndex
FROM RFC1213-MIB
ifIndex, InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB;
-- ----------------------------------------------------------------------------
-- } INSERT: bosRootDefs
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { INSERT: bosRoot
-- ----------------------------------------------------------------------------
-- enterprise OID reference http://www.iana.org/assignments/enterprise-numbers
juniper MODULE-IDENTITY
LAST-UPDATED "200711270000Z"
ORGANIZATION "Juniper Networks"
CONTACT-INFO ""
DESCRIPTION "This mib module is the base mib for the propriatory mibs."
::= { enterprises 1411 }
-- Access "juniper" Groups for Juniper Networks ex2500 Private MIBs
ex2500 OBJECT IDENTIFIER ::= { juniper 102 }
-- ----------------------------------------------------------------------------
-- { INSERT: base
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: base
-- ----------------------------------------------------------------------------
-- Access "ex2500" group for Common Juniper Networks ex2500 Private MIBs
bosradius OBJECT IDENTIFIER ::= { ex2500 25 }
-- ----------------------------------------------------------------------------
-- { INSERT: radius
-- ----------------------------------------------------------------------------
radiusExtClient OBJECT IDENTIFIER ::= { bosradius 1 }
radiusExtDebugMask OBJECT-TYPE
SYNTAX INTEGER{
disableall (0),
enableall (1),
error (2),
event (3),
packet (4),
response (5),
timer (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask for enabling or disabling the Debug/Trace
prints in the radius module."
::= { radiusExtClient 1 }
radiusMaxNoOfUserEntries OBJECT-TYPE
SYNTAX Integer32 (1 ..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Max of No of User entries stored.For value of this
object will be stored for the MemPool Initialization."
::= { radiusExtClient 2 }
radiusSecureBackdoorStatus OBJECT-TYPE
SYNTAX INTEGER { enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Status of RADIUS Server Secure Backdoor.If it is
enabled allow noradius user to login with admin password
otherwise it won't allow noradius user to login."
::= { radiusExtClient 3 }
radiusNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the RADIUS port number."
DEFVAL { 1812 }
::= { radiusExtClient 4 }
radiusExtServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusExtServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS servers with
which the client shares a secret."
::= { radiusExtClient 5 }
radiusExtServerEntry OBJECT-TYPE
SYNTAX RadiusExtServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a RADIUS server
with which the client shares a secret."
INDEX {radiusExtServerIndex}
::= { radiusExtServerTable 1 }
RadiusExtServerEntry ::= SEQUENCE {
radiusExtServerIndex InterfaceIndex,
radiusExtServerAddress IpAddress,
radiusExtServerType INTEGER,
radiusExtServerSharedSecret DisplayString,
radiusExtServerResponseTime INTEGER,
radiusExtServerMaximumRetransmission INTEGER,
radiusExtServerEntryStatus RowStatus
}
radiusExtServerIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RADIUS server with whom the client interacts."
::= { radiusExtServerEntry 1 }
radiusExtServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the RADIUS server
referred to in this table entry."
::= { radiusExtServerEntry 2 }
radiusExtServerType OBJECT-TYPE
SYNTAX INTEGER { auth (1),
acct (2),
both (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS server type
(Authentication or Accounting(Not Available) or Both(Not Available)).
For creating a server entry Server Type should be set"
::= { radiusExtServerEntry 3 }
radiusExtServerSharedSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secret string which is shared between Server and Client"
::= { radiusExtServerEntry 4 }
--radiusExtServerEnabled OBJECT-TYPE
-- SYNTAX INTEGER { enabled (1),
-- disabled (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Flag to tell whether the server is active or Inactive"
-- DEFVAL { enabled }
-- ::= { radiusExtServerEntry 5 }
radiusExtServerResponseTime OBJECT-TYPE
SYNTAX INTEGER (1 ..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time within which the server has to respond for a
request from the client"
::= { radiusExtServerEntry 6 }
radiusExtServerMaximumRetransmission OBJECT-TYPE
SYNTAX INTEGER (1 ..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The allowed maximum no. of trials to be tried by a client to get
response from the server for a request"
::= { radiusExtServerEntry 7 }
radiusExtServerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the entry can be used as specified in the SNMP V2
standard. "
::= { radiusExtServerEntry 8 }
radiusExtServerEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to denote whether the server is active or Inactive"
DEFVAL { disabled }
::= { radiusExtClient 6 }
radiusNewCfgAcctPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the RADIUS Accounting port number."
DEFVAL { 1813 }
::= { radiusExtClient 7 }
radiusExtAcctEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to denote whether the RADIUS Accounting is active or Inactive"
DEFVAL { disabled }
::= { radiusExtClient 8 }
-- ----------------------------------------------------------------------------
-- } INSERT: radius
-- ----------------------------------------------------------------------------
bosntp OBJECT IDENTIFIER ::= { ex2500 15 }
-- ----------------------------------------------------------------------------
-- { INSERT: ntp
-- ----------------------------------------------------------------------------
ntpCfg OBJECT IDENTIFIER ::= { bosntp 1 }
ntpOps OBJECT IDENTIFIER ::= { bosntp 2 }
-- -----------------------------------------------------------------
-- NTP Configuration Group
-- -----------------------------------------------------------------
ntpCfgAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
enabled (1),
disabled (0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative status of the NTP client service
in the switch. A value of 'enabled' denotes that
the client will regularly poll the NTP servers in
order to synchronize the local system time."
::= { ntpCfg 1 }
ntpCfgPollInterval OBJECT-TYPE
SYNTAX Integer32 (0..10080)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time interval, in minutes, between two polling
periods wherein the client sends a request to the
designated NTP servers. Set Poll Interval to zero would set to its default value"
DEFVAL { 1440 }
::= { ntpCfg 2 }
ntpCfgPriServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the primary NTP server. Setting
the address to all zeroes will remove the primary
server configuration. During a polling period, the
client first sends a request to the primary server
followed by the secondary server."
::= { ntpCfg 3 }
ntpCfgSecServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the secondary NTP server. Setting
the address to all zeroes will remove the secondary
server configuration. During a polling period, the
client first sends a request to the primary server
followed by the secondary server."
::= { ntpCfg 4 }
-- -----------------------------------------------------------------
-- NTP Operations Group
-- -----------------------------------------------------------------
ntpOpsPollServer OBJECT-TYPE
SYNTAX INTEGER { no(1), yes(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to 'yes' will trigger the NTP
client to transmit a request to the designated
servers. The set operation has no effect if the
client is administratively disabled. A get operation
on this object always yields a value of 'no'."
::= { ntpOps 1 }
-- -----------------------------------------------------------------
-- NTP Statistics
-- -----------------------------------------------------------------
ntpSysTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System Time when the request is sent."
::= { ntpCfg 5 }
ntpLastUpdtTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Last Updated Time when the response is received from
Primary/Secondary server."
::= { ntpCfg 6 }
ntpLastUpdtServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Server from which last time was updated. "
::= { ntpCfg 7 }
-- -------------------------------------
-- ntpServerStatsTable - Start
-- -------------------------------------
ntpServerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpServerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of statistics information for Primary and Secondary Servers
supported by the NTP. "
::= { ntpCfg 8 }
ntpServerStatsEntry OBJECT-TYPE
SYNTAX NtpServerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index to the table is Ip Address to Primary/Secondary Server."
INDEX { ntpIpAddress}
::= { ntpServerStatsTable 1 }
NtpServerStatsEntry ::=
SEQUENCE {
ntpIpAddress
IpAddress,
ntpStatSerReq
Counter32,
ntpStatSerRep
Counter32,
ntpStatSerUpd
Counter32,
ntpSerClearStat
INTEGER
}
ntpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address allocated to Primary/Secondary Server ."
::= { ntpServerStatsEntry 1 }
ntpStatSerReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of requests Sent to Server."
::= { ntpServerStatsEntry 2 }
ntpStatSerRep OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of replies received from Server."
::= { ntpServerStatsEntry 3 }
ntpStatSerUpd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of Updates received from Server."
::= { ntpServerStatsEntry 4 }
ntpSerClearStat OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the statistics
for respective Server. Setting this to OK(1) would not clear anything."
::= { ntpServerStatsEntry 5 }
-- -------------------------------------
-- ntpServerStatsTable - End
-- -------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: ntp
-- ----------------------------------------------------------------------------
boscfa OBJECT IDENTIFIER ::= { ex2500 27 }
-- ----------------------------------------------------------------------------
-- { INSERT: cfa
-- ----------------------------------------------------------------------------
InterfaceIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface
or interface sub-layer in the managed system. It is
recommended that values are assigned contiguously
starting from 1. The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization."
SYNTAX Integer32 (1..2147483647)
if OBJECT IDENTIFIER ::= { boscfa 1 }
ff OBJECT IDENTIFIER ::= { boscfa 2 }
fm OBJECT IDENTIFIER ::= { boscfa 3 }
traps OBJECT IDENTIFIER ::= { boscfa 4 }
-- Cfa If Group
-- This group defines objects for Interface Management.
ifMaxInterfaces OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the maximum number of interfaces that can
be present in the system."
::= { if 1 }
ifMaxPhysInterfaces OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the maximum number of physical interfaces
that can be present in the system."
::= { if 2 }
ifAvailableIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows an ifIndex which is available for creation of
any new virtual (non-physical) interface in the system.
This ifIndex value can be used for creation of interfaces
in the ifMainTable or any media-specif MIB. For creation
of physical interfaces, any free ifIndex between 1 and
ifMaxPhysInterfaces can be used."
::= { if 3 }
-- ifMainTable
-- This table is used for the management of all the interfaces in the
-- system.
ifMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex."
::= { if 4 }
ifMainEntry OBJECT-TYPE
SYNTAX IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { ifMainIndex }
::= { ifMainTable 1 }
IfMainEntry ::=
SEQUENCE {
ifMainIndex InterfaceIndex,
ifMainType INTEGER,
ifMainMtu Integer32,
ifMainAdminStatus INTEGER,
ifMainOperStatus INTEGER,
ifMainEncapType INTEGER,
ifMainBrgPortType INTEGER,
ifMainRowStatus RowStatus,
-- #ifdef BNTGLUE_WANTED /* INCLUDE_BNT */
ifMainPortName DisplayString,
ifMainLinkStateChangeCount Counter32,
-- #endif
ifMainVlanId INTEGER,
ifMainIntfIpNum INTEGER
}
ifMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { ifMainEntry 1 }
ifMainType OBJECT-TYPE
SYNTAX INTEGER {
rfc877x25(5), -- X.25
ethernetCsmacd(6), -- Ethernet/802.3
iso88025TokenRing(9), -- Token Ring
ppp(23), -- PPP link
softwareLoopback(24), -- Loopback Interface
frameRelay(32), -- Frame Relay DTE port
miox25(38), -- multiprotocol over x.25
-- used for X.25 VCs
aal5(49), -- AAL5 over ATM
async(84), -- ASYNC
frameRelayMPI(92), -- multiprotocol
-- over FR
-- used for FR VCs
-- and sub-interfaces
pppMultilinkBundle(108), -- PPP Multilink
-- Bundle
ipOverAtm(114), -- IPoA virtual
hdlc(118), -- HDLC port
tunnel(131), -- Encapsulation interface
atmSubInterface(134), -- VCs under IPoA
l3ipvlan(136), -- Layer3 VLAN interface
mplsTunnel (150), -- MPLS Tunnel Virtual Interface
ieee8023ad(161), -- Link Aggregation Mib
mpls (166) -- MPLS
} -- These are the currently supported
-- interfaces. More can be added at a
-- later time.
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type/protocol of interface. Specification of
the object is mandatory for all interfaces. This
value should be specified after the row creation
in the ifMainTable and before setting any other
object in this table. Once the type is specified,
it cannot be changed - the interface should be
deleted for changing the type of the interface.
The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49),
async(84) and hdlc(118) are physical interfaces while
all other types are virtual or logical interfaces.
For creation of physical interface types, it is mandatory to
specify the handle to the device driver using the ifAlias
object of the standard ifXTable before specifying the type.
This handle could be something like eth1 or /dev/abcd."
::= { ifMainEntry 2 }
ifMainMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MTU for the interface as shown to the higher
interface sub-layer (this value should not include
the encapsulation or header added by the interface).
If IP is operating over the interface, then this
value indicates the IP MTU over this interface.
For changing the MTU of any interface, the interface
must be brought down first - changing MTU while the
interface is administratively up is not permitted.
If not specified during interface creation, a default
value is assigned based on the ifMainType given to
the particular interface.
While configuring for logical VLAN interfaces, care
should be taken to, configure this value as the
lowest of the MTU values of the member ports."
::= { ifMainEntry 3 }
ifMainAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
The testing(3) state indicates that no operational
packets can be passed - this state is not currently
supported.
When a managed system initializes, all
interfaces start with ifMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, ifMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state)."
DEFVAL { down }
::= { ifMainEntry 4 }
ifMainOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status can not be
-- determined for
-- some reason.
dormant(5),
notPresent(6), -- some component is
-- missing
lowerLayerDown(7) -- down due to state
-- of lower-layer
-- interface(s).
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
If ifMainAdminStatus is down (2)
then ifMainOperStatus would be down (2). If
ifMainAdminStatus is changed to up (1) then
ifMainOperStatus should change to up (1) if the
interface is ready to transmit and receive
work traffic; it should change to dormant (5)
the interface is waiting for external actions
(such as a serial line waiting for an incoming
connection); it should change to lowerLayerDown(7)
state if it cannot be made up as the interface sub-layer
below it is down; it should remain in the down (2) state
if and only if there is a fault that prevents it
from going to the up (1) state; it should remain in
the notPresent (6) state if the interface has
missing (typically, hardware) components.
The status unknown(4) is shown when it is not possible
to determine the exact status of the interface - e.g.
the interface sub-layer is performing negotiations -
during this period the interface is not up but at the
same time, it is not a fault condition and hence it
cannot be shown as down - in such periods the status
is shown as unknown.
This object has the semantics of the ifOperStatus of the
standard ifTable."
::= { ifMainEntry 5 }
ifMainEncapType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nlpid(2), -- NLPID based encap
-- in the case of FR
-- and multiplexed
-- NLPID encap for X.25
nlpidSnap(3), -- NLPID-SNAP based
-- encap in the case
-- of FR and multiplexed
-- NLPID-SNAP encap for
-- X.25.
cudNlpid(4), -- dedicated NLPID for
-- X.25 only
cudNlpidSnap(5), -- dedicated
-- NLPID-SNAP for
-- X.25 only
llcSnap(6), -- for ATM VCs only
vcMultiplexed(7), -- for ATM VCs only
ethernetV2(8) -- for Ethernet interfaces
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation type to be used over the interface.
For Ethernet interfaces, the default encapsulation
type is ethernetV2(8). The other possible encapsulation
is llcSnap(6). If other(1) is specified then an
automatic encapsulation type learning method is used
in ARP for determining the encapsulation for unicast
destinations while the multicast and broadcast destinations
use ethernetV2(8).
For PPP and MLPPP interfaces, the encapsulation type can
only be other(1) and this is the default value.
For FR VCs, the value can be nlpid(2) (for carrying protocols
which have NLPID) or nlpidSnap(3) (for other protocols). The
default is nlpid(2) and the types of protocols supported are
inferred from the stack-layering implemented over the
interface.
For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3)
(where the VC can carry multiplexed protocol traffic with
each data packet containing the NLPID or SNAP header) or
cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies
the NLPID of the protocol or SNAP and the data packets do
not contain these headers - for dedicated VCs). The default
is cudNlpid(4).
For ATM VCs, the default is llcSnap(6) but the
vcMultiplexed(7) encapsulation is also supported.
This object is not applicable to other interfaces."
::= { ifMainEntry 6 }
ifMainBrgPortType OBJECT-TYPE
SYNTAX INTEGER {
providerNetworkPort (1),
customerNetworkPortPortBased (2),
customerNetworkPortStagged (3),
customerEdgePort (4),
propCustomerEdgePort (5),
propCustomerNetworkPort (6),
propProviderNetworkPort (7),
customerBridgePort (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Bridge port type of this specified externally accessible port.
Bridge Port type can be specified only for switch ports and not for
router ports.
providerNetworkPort - Port Connected to a single Provider.
SVLAN Classification is based on only the PVID configured for the
port for untagged packets.
customerNetworkPortPortBased - Port in the S-VLAN component that
can transmit or received frames for single customer.
All packets received on this port, are mapped to one single service
instance identified by the PVID of that Port.
Acceptable Port Type will be always Admit only Untagged or Priority
Tagged Frames on this port.
customerNetworkPortStagged - Port in the S-VLAN component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the S-tag
received or on the PVID of the port. Ingress Filtering will be
always enabled on this port.
customerEdgePort - Port in a Provider Edge Bridge connected to a
single customer. Multiple services can be provide on this port.
The Packets received on this interface will be first classified
to a CVLAN. CVLAN classification can be based on the Vid
in the C-Tag present in the packet (if it C-tagged packet) or from
the pvid of the port. Service instance selection (S-VLAN selection)
for a frame is done based on the entry present in the C-VID
registration table for the pair (C-VID, reception Port).
CustomerEdgePort configuration is allowed only in Provider Edge
Bridges.
propCustomerEdgePort - Port connected to a single customer, where
multiple services can be provided based on only Proprietary SVLAN
classification tables. S-VLAN classification will not happen based on
C-VID registration table on this port. propCustomerEdgePort
configuration is allowed only in Provider Edge Bridges.
propCustomerNetworkPort - Port connected to a single customer, where
multiple service can be provided based on CVLANs by assigning one of
the Proprietary SVLAN classification tables to this port. The
services can also be assigned using other proprietary SVLAN
classification tables where CVLAN is not the index of the table.
propProviderNetworkPort - Port connected to a Q-in-Q Bridge located
inside Provider Network. This port is part of S-VLAN component.
If packets to be tagged and sent out of this port will have 0x8100
as the ether type. Similarly pakcets with standard Q tag (ether type
as 0x8100) received will be considered as S-Tagged packets.
customerBridgePort - Type of the port to be used in customer
bridges as well in Provider(Q-in-Q) bridges. This type is not valid
in Provider Core bridges as well as Provider Edge bridge.
In Customer bridges and in Provider Bridges only customerPort option
is allowed.
Bridge Port Type cannot be set for a port-channel port, if some
physical ports are aggregated in it.
Also Bridge Port type cannot be set for a port, if part of a
port-channel.
Whenever the Bridge port type changes, the previous configuration
associated with the port will be flushed.
For example.
whenever CNP(STagged) and PNP port types are changed to any
other port type,
- The unicast entries learnt on this port and
- The VID translation table entries associated with the port
will be flushed.
Whenever CEP port type is changed to any other port type,
- The unicast entries learnt on this port
- The C-VID registration table entries associated with the port
- The PEP configuration table entries
- The service priority regeneration table entries
will be flushed.
Even the vlan membership of the port will be removed when the
Pbport type is changed."
DEFVAL { 8 }
::= { ifMainEntry 7 }
ifMainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A RowStatus variable for addition, deletion and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is active, the interface is created and
ready to use in the respective protocol modules.
When the status is notInService, the interface has not been
registered with the respective protocol modules and as such
those modules are not aware of the existence of the interface
- creation is hence, incomplete. Setting an active interface
to notInService results in de-registration/deletion of the
interface from the respective protocol modules and all the
configurations associated with that interface in those modules
may be lost.
Deletion of an interface, may affect the status of other
interfaces which are layered above or below it in the Interface
Stack (ifStackTable) and may result in other interfaces being
made notReady or notInService."
::= { ifMainEntry 8 }
ifMainPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to assign a alias to a port"
::= { ifMainEntry 9 }
--#ifdef BNTGLUE_WANTED /* INCLUDE_BNT */
ifMainLinkStateChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No of Link State changes for the interface"
::= { ifMainEntry 11 }
--#endif /* INCLUDE_BNT */
ifMainVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies Vlan associated with the IP Interface"
::= { ifMainEntry 12 }
ifMainIntfIpNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the Interface IP number assosiated with IP Interface"
::= { ifMainEntry 13 }
-- ifIpTable
-- This table is used for the management of the interfaces in the
-- system which are registered with IP.
ifIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed."
::= { if 5 }
ifIpEntry OBJECT-TYPE
SYNTAX IfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface over which IP is operating."
INDEX { ifMainIndex }
::= { ifIpTable 1 }
IfIpEntry ::=
SEQUENCE {
ifIpAddrAllocMethod INTEGER,
ifIpAddr IpAddress,
ifIpSubnetMask IpAddress,
ifIpBroadcastAddr IpAddress,
ifIpForwardingEnable TruthValue,
ifIpAddrAllocProtocol INTEGER
}
ifIpAddrAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
manual(1), -- To be set by Manager
negotiation(2), -- obtained from peer
dynamic(3),
none(4) -- none of the above
} -- Currently only
-- these method possible.
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism to be used for allocation of IP
address for this interface.
The value negotiation can be used only for PPP
and MLPPP interfaces which support obtaining of
IP addresses through negotiation.
The dynamic(3) option takes an IP
address dynamically from the available
server (dhcp/bootp) according to the
protocol specified in ifIpAddrAllocProtocol.
If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered interface."
DEFVAL { none }
::= { ifIpEntry 1 }
ifIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the interface is
not a network interface then the default value
of 0.0.0.0 is assigned and the interface is
treated as a un-numbered interface by IP."
DEFVAL { '00000000'H }
::= { ifIpEntry 2 }
ifIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { ifIpEntry 3 }
ifIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP broadcast address for this
interface. The value should be specified only
for network interfaces and any valid broadcast
address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { ifIpEntry 4 }
ifIpForwardingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether IP forwarding is enable on
this interface. Disabling IP forwarding on an
interface will result in packets which are to
be forwarded on that interface being dropped
and ICMP error messages being generated for the
packets."
DEFVAL { true }
::= { ifIpEntry 5 }
ifIpAddrAllocProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (0),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the protocol to be used to obtain
IP address for this interface. This object is
valid only when ifIpAddrAllocMethod is set to
dynamic (3)."
DEFVAL { dhcp }
::= { ifIpEntry 6 }
-- ifIvrTable
-- This table is used for the Inter VLAN Routing related
-- configurations for each interface such as converting Bridged interfaces
-- to Routed interfaces and vice-versa.
ifIvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interfaces in the system with IVR related
configurations.
This table is an extension to the ifMainTable. The index to
this table has the semantics of the ifMainIndex of the
ifMainTable."
::= { if 6 }
ifIvrEntry OBJECT-TYPE
SYNTAX IfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing IVR-related information applicable
to a interface."
INDEX { ifMainIndex }
::= { ifIvrTable 1 }
IfIvrEntry ::=
SEQUENCE {
ifIvrBridgedIface
TruthValue
}
ifIvrBridgedIface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if this interface is a Bridged interface
or not.
A value of 'TRUE' indicates that this interface is
a Bridged interface and is capable of performing
bridging of packets through this interface.
A value of 'FALSE' indicates that this
interface is a Routed interface and is capable of
performing routing of packets through this interface."
::= { ifIvrEntry 1 }
ifMaxIpInterfaces OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum number of IP interfaces that can
be present in the system."
::= { if 7 }
ifMaxMgmInterfaces OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum number of Mgmt interfaces that can
be present in the system."
::= { if 8 }
ifMaxLogicalInterfaces OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum number of logical interfaces that can
be present in the system."
::= { if 9 }
-- Cfa Ff Group
-- This group defines objects for Management of the Fast Forwarding
-- feature of the CFA.
ffCacheSize OBJECT-TYPE
SYNTAX Integer32 (10..65535)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object permits the resizing of the Host
Cache. This object can be changed only when
the Fast Forwarding Mechanism is disabled.
For changing the Cache Size, The Fast-Forwarding
Mechanism should be disabled first (this will
result in loss of all current entries in the
cache) and then enabled again after specifying
the new size."
::= { ff 2 }
ffIpChecksumValidationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object permits the enabling and disabling of
the validation of the IP Checksum for incoming
IP packets. Setting of this variable to TRUE(1) enables
the checksum validation and setting it to FALSE(2)
disables it."
DEFVAL { true }
::= { ff 3 }
ffCachePurgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of times the
entries in the Host Cache Table were purged due
to cache overflow."
::= { ff 4 }
ffCacheLastPurgeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the SysUpTime when the last purging of
entries in the Host Cache Table took place."
::= { ff 5 }
ffStaticEntryInvalidTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits enabling and disabling of the generation of
ffStaticEntryInvalid SNMP Enterprise Trap when a static
entry becomes invalid. When its value is TRUE(1), the
trap is generated when a static entry become invalid."
DEFVAL { true }
::= { ff 6 }
ffCurrentStaticEntryInvalidCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of static
entries in the Host Cache Table that are
currently invalid."
::= { ff 7 }
ffTotalEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the total number of
entries in the Host Cache Table."
::= { ff 8 }
ffStaticEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of static
entries in the Host Cache Table."
::= { ff 9 }
ffTotalPktsFastForwarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of packets
that were successfully fast-forwarded by the
host cache mechanism."
::= { ff 10 }
-- ffTable
-- This table shows the current status of the Host Cache in the
-- system.
ffHostCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF FfHostCacheEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table has entries corresponding to the current
entries in the Host Cache. The entries in this table
can be added, deleted or modified."
::= { ff 11 }
ffHostCacheEntry OBJECT-TYPE
SYNTAX FfHostCacheEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An Entry consisting of all the information
about an entry in the Host Cache."
INDEX { ffHostCacheDestAddr }
::= { ffHostCacheTable 1 }
FfHostCacheEntry ::=
SEQUENCE {
ffHostCacheDestAddr IpAddress,
ffHostCacheNextHopAddr IpAddress,
ffHostCacheIfIndex InterfaceIndex,
ffHostCacheNextHopMediaAddr OCTET STRING,
ffHostCacheHits Counter32,
ffHostCacheLastHitTime TimeStamp,
ffHostCacheEntryType INTEGER,
ffHostCacheRowStatus RowStatus
}
ffHostCacheDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP address of the destination host. "
::= { ffHostCacheEntry 1 }
ffHostCacheNextHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The IP address of the next-hop to which a packet
for this host are forwarded. This could be same as
ffHostCacheDestAddr if the next-hop is the end-host
as well.
When creating a static entry, this object
should be set with the IP address of the next-hop
(router) for a host which is not directly connected
to our system and with the IP address of the host
itself for a host which is directly connected to us.
A set on this object for an entry whose
ffHostCacheEntryType is dynamic is not permitted."
::= { ffHostCacheEntry 2 }
ffHostCacheIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Identifies the MIB-2 ifIndex of the outgoing
interface over which packets to this host are sent.
When creating a static entry, this object should be
set with the ifIndex of our network interface
for reaching the specified next-hop.
It is mandatory to specify the next-hop IP address
using the ffHostCacheNextHopAddr before setting this
value. The specified ifIndex should be that of an
interface which is registered with IP.
A set on this object for an entry
whose ffHostCacheEntryType is dynamic is not
permitted."
::= { ffHostCacheEntry 3 }
ffHostCacheNextHopMediaAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..6))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Provides the media address of the next-hop
to which the packet for this host is to be sent to.
It is mandatory to specify the next-hop IP address
and the outgoing ifIndex using the
ffHostCacheNextHopAddr and ffHostCacheIfIndex
respectively before setting this value.
This object must be specified for hosts, which are
reached through the interfaces of ethernetCsmacd(6)
and iso88025TokenRing(9) type. The value for such
interfaces would be the MAC address as per the
representation used for the particular media.
For interfaces of type ppp(23) and
pppMultilinkBundle(108), this object must have the
default value 0.
For virtual circuit interfaces (type miox25(38) and
frameRelayMPI(92)), this object must have the MIB-2
ifIndex assigned to the respective virtual circuit.
For virtual interfaces (type ipOverAtm(114) and
frameRelay(32)), this object MAY be used to (optionally)
specify the MIB-2 ifIndex assigned to the outgoing
virtual circuit. If not specified the value would be
obtained automatically from the respective modules.
A set on this object for an entry whose
ffHostCacheEntryType is dynamic is not permitted."
::= { ffHostCacheEntry 4 }
ffHostCacheHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the total number of packets fast-
forwarded to this host."
::= { ffHostCacheEntry 5 }
ffHostCacheLastHitTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the SysUpTime when the last packet
was fast-forwarded to this host."
::= { ffHostCacheEntry 6 }
ffHostCacheEntryType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic (2)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"An object, which indicates the type of this Host Cache
entry.
A static entry is an entry created by the Network
Manager and is not purged by the system. Such entries
would be invalidated due to route or other changes
but will continue to remain in the Host Cache.
Dynamic entries are those entries which have been learnt by
the system and which can be purged in the event of
a cache overflow or invalidation due to route or other
changes.
All entries created through SNMP must set this object to
static otherwise."
DEFVAL { static }
::= { ffHostCacheEntry 7 }
ffHostCacheRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"A RowStatus object for addition/deletion of Host
Cache entries. It also indicates the status of the
entry.
Set action is not allowed for notInService(2). An entry,
which has become invalid due to a route failure or
address resolution failure, would have the status
'notInService'.
An entry for a host for which the link layer
information can be cached but the information is
not currently available would have the status 'notReady'.
All active entries with all possible information
complete would have the value 'active'."
::= { ffHostCacheEntry 8 }
-- Cfa Fm Group
-- This group defines objects for Fault Management features.
fmMemoryResourceTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits the enabling and disabling of
fmLowMemoryResource Trap when a memory
allocation failure is encountered in the
module."
DEFVAL { true }
::= { fm 1 }
fmTimersResourceTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits the enabling and disabling of
fmLowTimerResource Trap when a request
for a timer fails in the module."
DEFVAL { true }
::= { fm 2 }
fmTracingEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits the enabling and disabling of
the generation of the log/trace messages
throughout the module. This object acts
as a Tracing Level Flag and specifies
the level of trace or log to be enabled in
the module."
DEFVAL { 0 }
::= { fm 3 }
fmMemAllocFailCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maintains a count of the number of times
when a failure was encountered while memory
allocation operation in the module."
::= { fm 4 }
fmTimerReqFailCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maintains a count of the number of times
when a failure was encountered while requesting
a timer in the module."
::= { fm 5 }
-- Notifications or Traps
trapPrefix OBJECT IDENTIFIER ::= { traps 0 }
fmLowTimerResource NOTIFICATION-TYPE
OBJECTS {
fmTimerReqFailCount
}
STATUS deprecated
DESCRIPTION
"This trap is generated whenever there is a failure in
a timer related operation in the module.
This trap is generated only when the value of the
fmTimersResouceTrapEnable object is TRUE(1)."
::= { trapPrefix 1 }
fmLowBufferResource NOTIFICATION-TYPE
OBJECTS {
fmMemAllocFailCount
}
STATUS deprecated
DESCRIPTION
"This trap is generated when a memory allocation
failure occurs in the module. This
trap is generated only when the value of the
fmMemoryResourceTrapEnable object is TRUE(1)."
::= { trapPrefix 2 }
ffStaticEntryInvalid NOTIFICATION-TYPE
OBJECTS {
ffHostCacheIfIndex,
ffHostCacheEntryType
}
STATUS deprecated
DESCRIPTION
"This trap is generated when a static entry
in the ffHostCacheTable becomes invalid
due to a route deletion or address resolution failure. This
trap is generated only when the value of the
ffStaticEntryInvalidTrapEnable object is TRUE (1)."
::= { trapPrefix 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: cfa
-- ----------------------------------------------------------------------------
bosrmon OBJECT IDENTIFIER ::= { ex2500 44 }
-- ----------------------------------------------------------------------------
-- { INSERT: rmon
-- ----------------------------------------------------------------------------
-- BosRmon Trace enable/disable object
rmonDebugType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled debug flag for rmon"
::= { bosrmon 1 }
-- BosRmon enable/disable status object
rmonEnableStatus OBJECT-TYPE
SYNTAX INTEGER { rmonenabled(1), rmondisabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the rmonenable flag for rmon"
::= { bosrmon 2 }
-- BosRmon stats supported object
rmonHwStatsSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the flag for whether HW supports
Etherstatistics or not "
::= { bosrmon 3 }
-- BosRmon HW history supported object
rmonHwHistorySupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWhistorysupp flag for rmon"
::= { bosrmon 4 }
-- BosRmon HWalarmsupported object
rmonHwAlarmSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWAlarmsupp flag for rmon"
::= { bosrmon 5 }
-- BosRmon HWHostsupported object
rmonHwHostSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWhostsupp flag for rmon"
::= { bosrmon 6 }
-- BosRmon HW hosttopN supported object
rmonHwHostTopNSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWHostTopN flag for rmon"
::= { bosrmon 7 }
-- BosRmon HW matrix supported object
rmonHwMatrixSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWMatrix flag for rmon"
::= { bosrmon 8 }
-- BosRmon HW Event supported object
rmonHwEventSupp OBJECT-TYPE
SYNTAX INTEGER { notsupported(0), supported(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the enabled HWEvent flag for rmon"
::= { bosrmon 9 }
-- ----------------------------------------------------------------------------
-- } INSERT: rmon
-- ----------------------------------------------------------------------------
bosla OBJECT IDENTIFIER ::= { ex2500 62 }
-- ----------------------------------------------------------------------------
-- { INSERT: la
-- ----------------------------------------------------------------------------
-- ------------------------------------------------------------
-- groups in the MIB
-- ------------------------------------------------------------
bosLaTrunkgroup OBJECT IDENTIFIER ::= { bosla 1 }
bosLaTrunkGroupInfo OBJECT IDENTIFIER ::= { bosla 2 }
bosLaLacp OBJECT IDENTIFIER ::= { bosla 3 }
bosLaLacpStats OBJECT IDENTIFIER ::= { bosla 4 }
bosLaLacpInfo OBJECT IDENTIFIER ::= { bosla 5 }
bosLaThashL2 OBJECT IDENTIFIER ::= { bosla 6 }
-- ------------------------------------------------------------------
-- Trunk Group Group
bosLaTrunkGroupTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in trunk group table."
::= { bosLaTrunkgroup 1 }
bosLaTrunkGroupCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaTrunkGroupCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { bosLaTrunkgroup 2 }
bosLaTrunkGroupCfgTableEntry OBJECT-TYPE
SYNTAX BosLaTrunkGroupCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { bosLaTrunkGroupCfgIndex }
::= { bosLaTrunkGroupCfgTable 1 }
BosLaTrunkGroupCfgTableEntry ::=
SEQUENCE {
bosLaTrunkGroupCfgIndex InterfaceIndex,
bosLaTrunkGroupCfgPorts OCTET STRING,
bosLaTrunkGroupCfgAddPort Integer32,
bosLaTrunkGroupCfgRemovePort Integer32,
bosLaTrunkGroupCfgState INTEGER,
bosLaTrunkGroupCfgDelete INTEGER
}
bosLaTrunkGroupCfgIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { bosLaTrunkGroupCfgTableEntry 1 }
bosLaTrunkGroupCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { bosLaTrunkGroupCfgTableEntry 2 }
bosLaTrunkGroupCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added in the trunk group. When read, 0 is returned."
::= { bosLaTrunkGroupCfgTableEntry 3 }
bosLaTrunkGroupCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be deleted from the trunk group. when read, 0
is returned."
::= { bosLaTrunkGroupCfgTableEntry 4 }
bosLaTrunkGroupCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { bosLaTrunkGroupCfgTableEntry 5 }
bosLaTrunkGroupCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { bosLaTrunkGroupCfgTableEntry 6 }
-- Trunk Group Information
bosLaTrunkGroupInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaTrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group information."
::= { bosLaTrunkGroupInfo 1 }
bosLaTrunkGroupInfoTableEntry OBJECT-TYPE
SYNTAX BosLaTrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in trunk group information table."
INDEX { bosLaTrunkGroupInfoIndex }
::= { bosLaTrunkGroupInfoTable 1 }
BosLaTrunkGroupInfoTableEntry ::= SEQUENCE {
bosLaTrunkGroupInfoIndex InterfaceIndex,
bosLaTrunkGroupInfoState INTEGER,
bosLaTrunkGroupInfoProtocol INTEGER,
bosLaTrunkGroupInfoPorts OCTET STRING
}
bosLaTrunkGroupInfoIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { bosLaTrunkGroupInfoTableEntry 1 }
bosLaTrunkGroupInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group state."
::= { bosLaTrunkGroupInfoTableEntry 2 }
bosLaTrunkGroupInfoProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group protocol
None - Neither static nor lacp
Static - static trunk group
Lacp - dynamic trunk group"
::= { bosLaTrunkGroupInfoTableEntry 3 }
bosLaTrunkGroupInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { bosLaTrunkGroupInfoTableEntry 4 }
bosLaTrunkGroupInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaTrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Trunk Group Info."
::= {bosLaTrunkGroupInfo 2 }
bosLaTrunkGroupInfoPortTableEntry OBJECT-TYPE
SYNTAX BosLaTrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Trunk Info table."
INDEX { bosLaTrunkGroupInfoPortTrunkId, bosLaTrunkGroupInfoPortPortId, bosLaTrunkGroupInfoPortInstId }
::= { bosLaTrunkGroupInfoPortTable 1 }
BosLaTrunkGroupInfoPortTableEntry ::= SEQUENCE {
bosLaTrunkGroupInfoPortTrunkId InterfaceIndex,
bosLaTrunkGroupInfoPortPortId InterfaceIndex,
bosLaTrunkGroupInfoPortInstId Integer32,
bosLaTrunkGroupInfoPortStatus INTEGER
}
bosLaTrunkGroupInfoPortTrunkId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Trunk identifier."
::= { bosLaTrunkGroupInfoPortTableEntry 1 }
bosLaTrunkGroupInfoPortPortId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port identifier."
::= { bosLaTrunkGroupInfoPortTableEntry 2 }
bosLaTrunkGroupInfoPortInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Spanning Tree Group identifier."
::= { bosLaTrunkGroupInfoPortTableEntry 3 }
bosLaTrunkGroupInfoPortStatus OBJECT-TYPE
SYNTAX INTEGER{
down(0),
blocking(1),
forwarding(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { bosLaTrunkGroupInfoPortTableEntry 4 }
-- Link Aggregation Control Protocol Group
bosLaLacpSystemPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { bosLaLacp 1 }
bosLaLacpSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { bosLaLacp 2 }
bosLaLacpPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaLacpPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { bosLaLacp 3 }
bosLaLacpPortCfgTableEntry OBJECT-TYPE
SYNTAX BosLaLacpPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { bosLaLacpPortCfgTableId }
::= { bosLaLacpPortCfgTable 1 }
BosLaLacpPortCfgTableEntry ::= SEQUENCE {
bosLaLacpPortCfgTableId InterfaceIndex,
bosLaLacpPortState INTEGER,
bosLaLacpPortActorPortPriority Integer32,
bosLaLacpPortActorAdminKey Integer32,
bosLaLacpPortStaticTrunkId Integer32
}
bosLaLacpPortCfgTableId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" LACP port number."
::= { bosLaLacpPortCfgTableEntry 1 }
bosLaLacpPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { bosLaLacpPortCfgTableEntry 2 }
bosLaLacpPortActorPortPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { bosLaLacpPortCfgTableEntry 3 }
bosLaLacpPortActorAdminKey OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.
By default, port index itself is the key. That is default
key for port 1 is 1, port 2 is 2..."
::= { bosLaLacpPortCfgTableEntry 4 }
bosLaLacpPortStaticTrunkId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the static lacp id of the port. Its value
can be <0- Max number of static port channels>.
'0' means the port is no longer in static lacp. Value 0 can be
configured only if the port's lacp mode is off.
If the value is non-zero,then the configured value is the static
lacp trunk Id of the port.
If a port is to be configured in static lacp, this mib object needs
to be configured before configuring the admin key
(bosLaLacpPortActorAdminKey). This object need to be set only if
the port is to be configured in static lacp.
"
::={bosLaLacpPortCfgTableEntry 5 }
-- LACP Statistics
bosLaLacpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaLacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP Stats."
::= {bosLaLacpStats 1}
bosLaLacpStatsTableEntry OBJECT-TYPE
SYNTAX BosLaLacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Lacp status info."
INDEX { lacpStatsIndex }
::= { bosLaLacpStatsTable 1 }
BosLaLacpStatsTableEntry ::= SEQUENCE {
lacpStatsIndex InterfaceIndex,
lacpdusRx Integer32,
markerpdusRx Integer32,
markerresponsepdusRx Integer32,
unknownRx Integer32,
illegalRx Integer32,
lacpdusTx Integer32,
markerpdusTx Integer32,
markerresponsepdusTx Integer32,
lacpClearStats INTEGER
}
lacpStatsIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index"
::= {bosLaLacpStatsTableEntry 1}
lacpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid LACPDUs received"
::= {bosLaLacpStatsTableEntry 2}
markerpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker PDUs received"
::= {bosLaLacpStatsTableEntry 3}
markerresponsepdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker Rsp PDUs received"
::= {bosLaLacpStatsTableEntry 4}
unknownRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown version/TLV type"
::= {bosLaLacpStatsTableEntry 5}
illegalRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Illegal subtype received"
::= {bosLaLacpStatsTableEntry 6}
lacpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACPDUs transmitted"
::= {bosLaLacpStatsTableEntry 7}
markerpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Market PDUs transmitted"
::= {bosLaLacpStatsTableEntry 8}
markerresponsepdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Marker Rsp PDUs transmitted "
::= {bosLaLacpStatsTableEntry 9}
lacpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LACP statistics."
::= { bosLaLacpStatsTableEntry 10 }
-- MIB Objects :
-- LACP information
bosLaLacpInfoAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaLacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP aggregator information."
::= { bosLaLacpInfo 1 }
bosLaLacpInfoAggrTableEntry OBJECT-TYPE
SYNTAX BosLaLacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a LACP aggregator."
INDEX { bosLaLacpInfoAggrIndex }
::= { bosLaLacpInfoAggrTable 1 }
BosLaLacpInfoAggrTableEntry ::= SEQUENCE {
bosLaLacpInfoAggrIndex InterfaceIndex,
bosLaLacpInfoAggrId Integer32,
bosLaLacpInfoAggrMac MacAddress,
bosLaLacpInfoAggrActSysPrio Integer32,
bosLaLacpInfoAggrActSysId MacAddress,
bosLaLacpInfoAggrIndivState INTEGER,
bosLaLacpInfoAggrActAdminKey Integer32,
bosLaLacpInfoAggrActOperKey Integer32,
bosLaLacpInfoAggrPartSysPrio Integer32,
bosLaLacpInfoAggrPartSysId MacAddress,
bosLaLacpInfoAggrPartOperKey Integer32,
bosLaLacpInfoAggrReadyState INTEGER,
bosLaLacpInfoAggrNumPorts Integer32,
bosLaLacpInfoAggrPorts DisplayString
}
bosLaLacpInfoAggrIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The aggregator identifier."
::= { bosLaLacpInfoAggrTableEntry 1 }
bosLaLacpInfoAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregator identifier."
::= { bosLaLacpInfoAggrTableEntry 2 }
bosLaLacpInfoAggrMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator."
::= { bosLaLacpInfoAggrTableEntry 3 }
bosLaLacpInfoAggrActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-only value indicating the priority
value associated with the Actor's System ID."
::= { bosLaLacpInfoAggrTableEntry 4 }
bosLaLacpInfoAggrActSysId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MAC address value used as a unique
identifier for the System that contains this Aggregator"
::= { bosLaLacpInfoAggrTableEntry 5 }
bosLaLacpInfoAggrIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value indicating whether the
Aggregator represents an Aggregate (`TRUE') or
an Individual link (`FALSE')."
::= { bosLaLacpInfoAggrTableEntry 6 }
bosLaLacpInfoAggrActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregator."
::= { bosLaLacpInfoAggrTableEntry 7 }
bosLaLacpInfoAggrActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the
Aggregator."
::= { bosLaLacpInfoAggrTableEntry 8 }
bosLaLacpInfoAggrPartSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority
value will be a value assigned by the local System."
::= { bosLaLacpInfoAggrTableEntry 9 }
bosLaLacpInfoAggrPartSysId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MAC address value consisting of the
unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is
no known Partner. If the aggregation is manually
configured, this System ID value will be a value
assigned by the local System."
::= { bosLaLacpInfoAggrTableEntry 10 }
bosLaLacpInfoAggrPartOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the
Aggregator's current protocol Partner. This is a 16-bit
read-only value. If the aggregation is manually
configured, this Key value will be a value assigned by
the local System."
::= { bosLaLacpInfoAggrTableEntry 11 }
bosLaLacpInfoAggrReadyState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregation Ready State"
::= { bosLaLacpInfoAggrTableEntry 12 }
bosLaLacpInfoAggrNumPorts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ports configured in the aggregator"
::= { bosLaLacpInfoAggrTableEntry 13 }
bosLaLacpInfoAggrPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ports configured in aggregator"
::= { bosLaLacpInfoAggrTableEntry 14 }
bosLaLacpInfoPort OBJECT IDENTIFIER ::= { bosLaLacpInfo 2 }
bosLaLacpInfoPortGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaLacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port general information."
::= { bosLaLacpInfoPort 1 }
bosLaLacpInfoPortGeneralTableEntry OBJECT-TYPE
SYNTAX BosLaLacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"General information about a LACP port."
INDEX { bosLaLacpInfoPortGeneralIndex }
::= { bosLaLacpInfoPortGeneralTable 1 }
BosLaLacpInfoPortGeneralTableEntry ::= SEQUENCE {
bosLaLacpInfoPortGeneralIndex InterfaceIndex,
bosLaLacpInfoPortLacpEna INTEGER,
bosLaLacpInfoPortAdminEna INTEGER,
bosLaLacpInfoPortActSysId MacAddress,
bosLaLacpInfoPortActSysPrio Integer32,
bosLaLacpInfoPortActAdminKey Integer32,
bosLaLacpInfoPortActOperKey Integer32,
bosLaLacpInfoPortActPortNum Integer32,
bosLaLacpInfoPortActPortPrio Integer32,
bosLaLacpInfoPortIndivState INTEGER,
bosLaLacpInfoSelAggrId Integer32,
bosLaLacpInfoAttAggrId Integer32,
bosLaLacpInfoPortReadyN INTEGER,
bosLaLacpInfoPortNtt INTEGER,
bosLaLacpInfoPortSelected INTEGER,
bosLaLacpInfoPortRxState DisplayString,
bosLaLacpInfoPortMuxState DisplayString,
bosLaLacpInfoPortTrunkType INTEGER
}
bosLaLacpInfoPortGeneralIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier."
::= { bosLaLacpInfoPortGeneralTableEntry 1 }
bosLaLacpInfoPortLacpEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value indicating whether lacp is enabled (1) or disabled
(2) on this port"
::= { bosLaLacpInfoPortGeneralTableEntry 2 }
bosLaLacpInfoPortAdminEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value indicating whether the port is enabled (1) or disabled
(2)"
::= { bosLaLacpInfoPortGeneralTableEntry 3 }
bosLaLacpInfoPortActSysId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MAC address value that defines the
value of the System ID for the System that contains this
Aggregation Port."
::= { bosLaLacpInfoPortGeneralTableEntry 4 }
bosLaLacpInfoPortActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-only value used to define the priority
value associated with the Actor's System ID."
::= { bosLaLacpInfoPortGeneralTableEntry 5 }
bosLaLacpInfoPortActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port."
::= { bosLaLacpInfoPortGeneralTableEntry 6 }
bosLaLacpInfoPortActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the
Aggregation Port."
::= { bosLaLacpInfoPortGeneralTableEntry 7 }
bosLaLacpInfoPortActPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port"
::= { bosLaLacpInfoPortGeneralTableEntry 8 }
bosLaLacpInfoPortActPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the port priority
for the port"
::= { bosLaLacpInfoPortGeneralTableEntry 9 }
bosLaLacpInfoPortIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" read-only value indicating whether the
Aggregation Port is able to Aggregate (`TRUE') or is
only able to operate as an Individual link (`FALSE')."
::= { bosLaLacpInfoPortGeneralTableEntry 10 }
bosLaLacpInfoSelAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier value of the Aggregator that this
Aggregation Port has currently selected. Zero indicates
that the Aggregation Port has not selected an
Aggregator, either because it is in the process of
detaching from an Aggregator or because there is no
suitable Aggregator available for it to select.
This value is read-only."
::= { bosLaLacpInfoPortGeneralTableEntry 11 }
bosLaLacpInfoAttAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier value of the Aggregator that this
Aggregation Port is currently attached to. Zero
indicates that the Aggregation Port is not currently
attached to an Aggregator. This value is read-only."
::= { bosLaLacpInfoPortGeneralTableEntry 12 }
bosLaLacpInfoPortReadyN OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port."
::= { bosLaLacpInfoPortGeneralTableEntry 13 }
bosLaLacpInfoPortNtt OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link."
::= { bosLaLacpInfoPortGeneralTableEntry 14 }
bosLaLacpInfoPortSelected OBJECT-TYPE
SYNTAX INTEGER {
selected(1),
unselected(2),
standby(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently precent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition."
::= { bosLaLacpInfoPortGeneralTableEntry 15 }
bosLaLacpInfoPortRxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive machine state of the port"
::= { bosLaLacpInfoPortGeneralTableEntry 16 }
bosLaLacpInfoPortMuxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mux machine state of the port"
::= { bosLaLacpInfoPortGeneralTableEntry 17 }
bosLaLacpInfoPortTrunkType OBJECT-TYPE
SYNTAX INTEGER {
static(0),
dynamic(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This read-only object is used to display whether the port participates
in dynamic lacp or static lacp. The default value is dynamic lacp.
static(0) - The port is involved only in static aggregation.
i.e. the port can be a member of only the
aggregation to which it is configured.
dynamic(1) - The port participates in dynamic aggregation
selection. i.e. the port will be a part of best
aggregation selected based on System id and Admin
key.
This object is set to 'static' once the port's static lacp id is
configured"
::={ bosLaLacpInfoPortGeneralTableEntry 18 }
bosLaLacpInfoPortAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaLacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port admin information."
::= { bosLaLacpInfoPort 2 }
bosLaLacpInfoPortAdminTableEntry OBJECT-TYPE
SYNTAX BosLaLacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Admin information about a LACP port."
INDEX { bosLaLacpInfoPortAdminIndex }
::= { bosLaLacpInfoPortAdminTable 1 }
BosLaLacpInfoPortAdminTableEntry ::= SEQUENCE {
bosLaLacpInfoPortAdminIndex InterfaceIndex,
bosLaLacpInfoPortActAdPortState DisplayString,
bosLaLacpInfoPortActAdActiv INTEGER,
bosLaLacpInfoPortActAdSync INTEGER,
bosLaLacpInfoPortActAdDef INTEGER,
bosLaLacpInfoPortActAdTimeout INTEGER,
bosLaLacpInfoPortActAdColl INTEGER,
bosLaLacpInfoPortActAdExp INTEGER,
bosLaLacpInfoPortActAdAggr INTEGER,
bosLaLacpInfoPortActAdDist INTEGER
}
bosLaLacpInfoPortAdminIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier."
::= { bosLaLacpInfoPortAdminTableEntry 1 }
bosLaLacpInfoPortActAdPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { bosLaLacpInfoPortAdminTableEntry 7 }
bosLaLacpInfoPortActAdActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates lacp activity(active/passive))"
::= { bosLaLacpInfoPortAdminTableEntry 8 }
bosLaLacpInfoPortActAdSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates Synchronization"
::= { bosLaLacpInfoPortAdminTableEntry 9 }
bosLaLacpInfoPortActAdDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates Defaulted state"
::= { bosLaLacpInfoPortAdminTableEntry 10 }
bosLaLacpInfoPortActAdTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates Timeout"
::= { bosLaLacpInfoPortAdminTableEntry 11 }
bosLaLacpInfoPortActAdColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates Collecting state"
::= { bosLaLacpInfoPortAdminTableEntry 12 }
bosLaLacpInfoPortActAdExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates Expired state"
::= { bosLaLacpInfoPortAdminTableEntry 13 }
bosLaLacpInfoPortActAdAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates Aggregating state"
::= { bosLaLacpInfoPortAdminTableEntry 14 }
bosLaLacpInfoPortActAdDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates Distributing state"
::= { bosLaLacpInfoPortAdminTableEntry 15 }
bosLaLacpInfoPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosLaLacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port oper information."
::= { bosLaLacpInfoPort 3 }
bosLaLacpInfoPortOperTableEntry OBJECT-TYPE
SYNTAX BosLaLacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Oper information about a LACP port."
INDEX { bosLaLacpInfoPortOperIndex }
::= { bosLaLacpInfoPortOperTable 1 }
BosLaLacpInfoPortOperTableEntry ::= SEQUENCE {
bosLaLacpInfoPortOperIndex InterfaceIndex,
bosLaLacpInfoPortPartOpSysPrio Integer32,
bosLaLacpInfoPortPartOpSysId MacAddress,
bosLaLacpInfoPortPartOpKey Integer32,
bosLaLacpInfoPortPartOpPortNum Integer32,
bosLaLacpInfoPortPartOpPortPrio Integer32,
bosLaLacpInfoPortActOpPortState DisplayString,
bosLaLacpInfoPortActOpActiv INTEGER,
bosLaLacpInfoPortActOpSync INTEGER,
bosLaLacpInfoPortActOpDef INTEGER,
bosLaLacpInfoPortActOpTimeout INTEGER,
bosLaLacpInfoPortActOpColl INTEGER,
bosLaLacpInfoPortActOpExp INTEGER,
bosLaLacpInfoPortActOpAggr INTEGER,
bosLaLacpInfoPortActOpDist INTEGER,
bosLaLacpInfoPortPartOpPortState DisplayString,
bosLaLacpInfoPortPartOpActiv INTEGER,
bosLaLacpInfoPortPartOpSync INTEGER,
bosLaLacpInfoPortPartOpDef INTEGER,
bosLaLacpInfoPortPartOpTimeout INTEGER,
bosLaLacpInfoPortPartOpColl INTEGER,
bosLaLacpInfoPortPartOpExp INTEGER,
bosLaLacpInfoPortPartOpAggr INTEGER,
bosLaLacpInfoPortPartOpDist INTEGER
}
bosLaLacpInfoPortOperIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier."
::= { bosLaLacpInfoPortOperTableEntry 1 }
bosLaLacpInfoPortPartOpSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-write value used to define the
value of priority associated with the partner port"
::= { bosLaLacpInfoPortOperTableEntry 2 }
bosLaLacpInfoPortPartOpSysId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MAC address value that defines the
value of the System ID for the partner port"
::= { bosLaLacpInfoPortOperTableEntry 3 }
bosLaLacpInfoPortPartOpKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lacp Key associated with the partner port"
::= { bosLaLacpInfoPortOperTableEntry 4 }
bosLaLacpInfoPortPartOpPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Partne port index"
::= { bosLaLacpInfoPortOperTableEntry 5 }
bosLaLacpInfoPortPartOpPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Partner port priority"
::= { bosLaLacpInfoPortOperTableEntry 6 }
bosLaLacpInfoPortActOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { bosLaLacpInfoPortOperTableEntry 7 }
bosLaLacpInfoPortActOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lacp Activity of the port"
::= { bosLaLacpInfoPortOperTableEntry 8 }
bosLaLacpInfoPortActOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Synchronization state of the port"
::= { bosLaLacpInfoPortOperTableEntry 9 }
bosLaLacpInfoPortActOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defaulted state of the port"
::= { bosLaLacpInfoPortOperTableEntry 10 }
bosLaLacpInfoPortActOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timeout"
::= { bosLaLacpInfoPortOperTableEntry 11 }
bosLaLacpInfoPortActOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Collecting state of the port"
::= { bosLaLacpInfoPortOperTableEntry 12 }
bosLaLacpInfoPortActOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Expired state of the port"
::= { bosLaLacpInfoPortOperTableEntry 13 }
bosLaLacpInfoPortActOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregating state of the port"
::= { bosLaLacpInfoPortOperTableEntry 14 }
bosLaLacpInfoPortActOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distributing state of the port"
::= { bosLaLacpInfoPortOperTableEntry 15 }
bosLaLacpInfoPortPartOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { bosLaLacpInfoPortOperTableEntry 16 }
bosLaLacpInfoPortPartOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lacp Activity of partner"
::= { bosLaLacpInfoPortOperTableEntry 17 }
bosLaLacpInfoPortPartOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Synchronisation state of the partner port"
::= { bosLaLacpInfoPortOperTableEntry 18 }
bosLaLacpInfoPortPartOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"defaulted state of the partner port"
::= { bosLaLacpInfoPortOperTableEntry 19 }
bosLaLacpInfoPortPartOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timeout"
::= { bosLaLacpInfoPortOperTableEntry 20 }
bosLaLacpInfoPortPartOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Collecting state of the partner port"
::= { bosLaLacpInfoPortOperTableEntry 21 }
bosLaLacpInfoPortPartOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Expired state of the partner port"
::= { bosLaLacpInfoPortOperTableEntry 22 }
bosLaLacpInfoPortPartOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregating state of the partner port"
::= { bosLaLacpInfoPortOperTableEntry 23 }
bosLaLacpInfoPortPartOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distributing state of the partner port"
::= { bosLaLacpInfoPortOperTableEntry 24 }
-- Elmo trunk hash
bosLaL2ThashCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable smac hash."
::= { bosLaThashL2 1 }
bosLaL2ThashCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dmac hash."
::= { bosLaThashL2 2 }
bosLaL2ThashCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sip hash."
::= { bosLaThashL2 3 }
bosLaL2ThashCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dip hash."
::= { bosLaThashL2 4 }
bosLaL2ThashCfgSmacDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable smac-dmac hash."
::= { bosLaThashL2 5 }
bosLaL2ThashCfgSipDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sip-dip hash."
::= { bosLaThashL2 6 }
-- END
bosufd OBJECT IDENTIFIER ::= { ex2500 68 }
-- ----------------------------------------------------------------------------
-- { INSERT: ufd
-- ----------------------------------------------------------------------------
-- ------------------------------------------------------------
-- groups in the MIB
-- ------------------------------------------------------------
ufdGeneralCfg OBJECT IDENTIFIER ::= { bosufd 1 }
ufdStats OBJECT IDENTIFIER ::= { bosufd 2 }
ufdTraps OBJECT IDENTIFIER ::= { bosufd 3 }
-- UFD Configuration objs ------------
ufdFdpCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable FDP state"
::= { ufdGeneralCfg 1 }
ufdCfgLtMPorts OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM port list. The ports are presented in a string format,
delimited by ',' or an interval of ports delimited by '-'"
::= { ufdGeneralCfg 2 }
ufdCfgLtMTrunks OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM trunk list. The trunks are presented in a string format,
delimited by ',' or an interval of trunks delimited by '-'"
::= { ufdGeneralCfg 3 }
ufdCfgLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM admin key."
::= { ufdGeneralCfg 4 }
ufdCfgLtDPorts OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD port list. The ports are presented in a string format,
delimited by ',' or an interval of ports delimited by '-'"
::= { ufdGeneralCfg 5 }
ufdCfgLtDTrunks OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD trunk list. The trunks are presented in a string format,
delimited by ',' or an interval of trunks delimited by '-'"
::= { ufdGeneralCfg 6 }
ufdLtDAdminkeyMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the LtD admin key configuration table."
::= { ufdGeneralCfg 7 }
ufdLtDAdminkeyCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF UfdLtDAdminkeyCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LtD admin key configuration."
::= { ufdGeneralCfg 8 }
ufdLtDAdminkeyCfgTableEntry OBJECT-TYPE
SYNTAX UfdLtDAdminkeyCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LtD admin key table."
INDEX { ufdLtDAdminkeyCfg }
::= { ufdLtDAdminkeyCfgTable 1 }
UfdLtDAdminkeyCfgTableEntry ::= SEQUENCE {
ufdLtDAdminkeyCfg INTEGER
}
ufdLtDAdminkeyCfg OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD admin key."
::= { ufdLtDAdminkeyCfgTableEntry 1 }
ufdCfgAddLtMPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 9 }
ufdCfgRemoveLtMPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 10 }
ufdCfgAddLtMTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 11 }
ufdCfgRemoveLtMTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 12 }
ufdCfgAddLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 13 }
ufdCfgRemoveLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 14 }
ufdCfgAddLtDPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to LtD. A '0' value is
returned when read."
::= { ufdGeneralCfg 15 }
ufdCfgRemoveLtDPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 16 }
ufdCfgAddLtDTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 17 }
ufdCfgRemoveLtDTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be removed from LtD. A '0'
value is returned when read."
::= { ufdGeneralCfg 18 }
ufdCfgAddLtDAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be added to LtD. A '0' value is
returned when read."
::= { ufdGeneralCfg 19 }
ufdCfgRemoveLtDAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be removed from LtD. A '0'
value is returned when read."
::= { ufdGeneralCfg 20 }
ufdCfgGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable gloabl ufd state."
::= { ufdGeneralCfg 21 }
-- UFD stats objs --
ufdNoLtMLinkFailure OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 1}
ufdNoLtMLinkBlockingState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 2}
ufdNoLtDAutoDisabled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 3}
ufdClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Setting this value to clear(2) clears the UFD stats."
::= {ufdStats 4}
ufdCfgGlobalStateTrap NOTIFICATION-TYPE
OBJECTS {
ufdCfgGlobalState
}
STATUS current
DESCRIPTION
"A ufdCfgGlobalStateTrap signifies the
Enabled or disabled global ufd state."
::= { ufdTraps 1 }
ufdCfgLtMTrap NOTIFICATION-TYPE
OBJECTS {
ufdCfgLtMPorts
}
STATUS current
DESCRIPTION
"The ufdCfgLtMTrap signifies that Ufd LtM states like LtMUp or LtMFailure."
::= { ufdTraps 2 }
ufdCfgLtDTrap NOTIFICATION-TYPE
OBJECTS {
ufdCfgLtDPorts
}
STATUS current
DESCRIPTION
"The ufdCfgLtDTrap signifies that Ufd LtD states like ufdLtDDisable or ufdLtDEnable."
::= { ufdTraps 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: ufd
-- ----------------------------------------------------------------------------
bostacacs OBJECT IDENTIFIER ::= { ex2500 77 }
-- ----------------------------------------------------------------------------
-- { INSERT: tacacs
-- ----------------------------------------------------------------------------
bosTacacsClientScalarGroup OBJECT IDENTIFIER
::= { bostacacs 1 }
bosTacacsClientTableGroup OBJECT IDENTIFIER
::= { bostacacs 2 }
-- Scalar MIB definitions
-- ***********************
bosTacClntActiveServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximim 5 server information could be configured.
This object indicates the active server among those 5 servers. The
TACACS+ client interacts with the server with this IP address. Setting
this object to zero disables the active server concept."
::= { bosTacacsClientScalarGroup 1 }
bosTacClntTraceLevel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The debug trace level for TACACS+ client implementation. This is bit
mapped data. Each bit of this object reprsent a trace level.
0x00000001 - Infomation
0x00000002 - Errors
0x00000004 - Tx. packet dump
0x00000008 - Rx. packet dump
0xffffffff - All of the above
0x00000000 - No trace"
::= { bosTacacsClientScalarGroup 2 }
bosTacClntRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" number of times the tacacs+ client searches the list of TACACS+ servers"
DEFVAL { 2 }
::= { bosTacacsClientScalarGroup 3 }
bosTacClntPrivLevelMap OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable cisco like privilege level mapping. By default privilege
level mapping is disabled.Privilege level mapping is
0 = CLI_AUTH_USER
3 = CLI_AUTH_OPER
6 = CLI_AUTH_ADMIN
After enabling privilege level mapping,privilege levels are
0 - 1 = CLI_AUTH_USER
6 - 8 = CLI_AUTH_OPER
14 - 15 = CLI_AUTH_ADMIN"
::= {bosTacacsClientScalarGroup 5}
bosTacClntSecureBackdoorStatus OBJECT-TYPE
SYNTAX INTEGER { enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Status of TACACS Server Secure Backdoor.If it is
enabled allow notacacs user to login with admin password
otherwise it won't allow notacacs user to login."
::= { bosTacacsClientScalarGroup 6 }
bosTacClntServerEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to denote whether the server is active or Inactive"
DEFVAL { disabled }
::= { bosTacacsClientScalarGroup 7 }
-- ----------------------------------
-- Statistics scalar MIB definitions
-- ----------------------------------
bosTacClntStatisticsGroup OBJECT IDENTIFIER
::= { bosTacacsClientScalarGroup 4 }
bosTacClntAuthenStartRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication start requests sent to server"
::= { bosTacClntStatisticsGroup 1 }
bosTacClntAuthenContinueRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication continue requests sent to server"
::= { bosTacClntStatisticsGroup 2 }
bosTacClntAuthenEnableRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication enable requests sent to server"
::= { bosTacClntStatisticsGroup 3 }
bosTacClntAuthenAbortRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication abort requests sent to server"
::= { bosTacClntStatisticsGroup 4 }
bosTacClntAuthenPassReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication pass received from server"
::= { bosTacClntStatisticsGroup 5 }
bosTacClntAuthenFailReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication fails received from server"
::= { bosTacClntStatisticsGroup 6 }
bosTacClntAuthenGetUserReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication get users received from server"
::= { bosTacClntStatisticsGroup 7 }
bosTacClntAuthenGetPassReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication get passwords received from server"
::= { bosTacClntStatisticsGroup 8 }
bosTacClntAuthenGetDataReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication get data received from server"
::= { bosTacClntStatisticsGroup 9 }
bosTacClntAuthenErrorReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication errors received from server"
::= { bosTacClntStatisticsGroup 10 }
bosTacClntAuthenFollowReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication follows received from server"
::= { bosTacClntStatisticsGroup 11 }
bosTacClntAuthenRestartReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication re starts received from server"
::= { bosTacClntStatisticsGroup 12 }
bosTacClntAuthenSessionTimouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authentication session time outs"
::= { bosTacClntStatisticsGroup 13 }
bosTacClntAuthorRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authorization requests sent to server"
::= { bosTacClntStatisticsGroup 14 }
bosTacClntAuthorPassAddReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authorization pass adds received from server"
::= { bosTacClntStatisticsGroup 15 }
bosTacClntAuthorPassReplReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authorization pass replaces received from server"
::= { bosTacClntStatisticsGroup 16 }
bosTacClntAuthorFailReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authorization fails received from server"
::= { bosTacClntStatisticsGroup 17 }
bosTacClntAuthorErrorReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authorization errors received from server"
::= { bosTacClntStatisticsGroup 18 }
bosTacClntAuthorFollowReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authorization errors received from server"
::= { bosTacClntStatisticsGroup 19 }
bosTacClntAuthorSessionTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of authorization session time outs"
::= { bosTacClntStatisticsGroup 20 }
bosTacClntAcctStartRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of accounting start requests sent to server"
::= { bosTacClntStatisticsGroup 21 }
bosTacClntAcctWdRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of accounting watch dog requests sent to server"
::= { bosTacClntStatisticsGroup 22 }
bosTacClntAcctStopRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of accounting stop requests sent to server"
::= { bosTacClntStatisticsGroup 23 }
bosTacClntAcctSuccessReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of accounting success received from server"
::= { bosTacClntStatisticsGroup 24 }
bosTacClntAcctErrorReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of accounting errors received from server"
::= { bosTacClntStatisticsGroup 25 }
bosTacClntAcctFollowReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of accounting follow received from server"
::= { bosTacClntStatisticsGroup 26 }
bosTacClntAcctSessionTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of accounting session time outs"
::= { bosTacClntStatisticsGroup 27 }
bosTacClntMalformedPktsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of Malformed packets received from server"
::= { bosTacClntStatisticsGroup 28 }
bosTacClntSocketFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of socket failures occured"
::= { bosTacClntStatisticsGroup 29 }
bosTacClntConnectionFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No. of connection failures occured"
::= { bosTacClntStatisticsGroup 30 }
-- Tabular MIB definitions
-- ***********************
-- -----------------------------
-- Table 1: TACACS+ Server Table
-- -----------------------------
bosTacClntServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosTacClntServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TACACS+ server table of server information entries. The entries have
server information like server IP address, secretkey, port no, timeout"
::= { bosTacacsClientTableGroup 1 }
bosTacClntServerEntry OBJECT-TYPE
SYNTAX BosTacClntServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry has server IP address, port no. secret key and timeout"
INDEX { bosTacClntServerAddress }
::= { bosTacClntServerTable 1 }
BosTacClntServerEntry ::= SEQUENCE {
bosTacClntServerAddress
IpAddress,
bosTacClntServerStatus
RowStatus,
bosTacClntServerSingleConnect
INTEGER,
bosTacClntServerPort
Integer32,
bosTacClntServerTimeout
Integer32,
bosTacClntServerKey
DisplayString
}
bosTacClntServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Server IP address"
::= { bosTacClntServerEntry 1 }
bosTacClntServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status of the server entry"
::= { bosTacClntServerEntry 2 }
bosTacClntServerSingleConnect OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To inform whether single connect support is enabled for this server or
not. When this is enabled multiple sessions are handled over single TCP
connection"
DEFVAL { no }
::= { bosTacClntServerEntry 3 }
bosTacClntServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Server port no. for TACACS+ protocol. The default value is 49"
DEFVAL { 49 }
::= { bosTacClntServerEntry 4 }
bosTacClntServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time out value within which a response is expected from server. If
response is not received within this time out, the session will be
released"
DEFVAL { 5 }
::= { bosTacClntServerEntry 5 }
bosTacClntServerKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Secret key shared between the client and server for encryption and
decryption"
::= { bosTacClntServerEntry 6 }
-- ----------------------------------------------------------------------------
-- } INSERT: tacacs
-- ----------------------------------------------------------------------------
bosPvrstMIB OBJECT IDENTIFIER ::= { ex2500 78 }
-- ----------------------------------------------------------------------------
-- { INSERT: pvrst
-- ----------------------------------------------------------------------------
VlanId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A 12-bit VLAN ID used in the VLAN Tag header."
SYNTAX Integer32 (1..4094)
BridgeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Identifier of Bridge in 8 byte format"
SYNTAX OCTET STRING (SIZE (8))
Timeout ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d4"
STATUS current
DESCRIPTION
" Time out value in 4 byte"
SYNTAX Integer32
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
bosPvrst OBJECT IDENTIFIER ::= { bosPvrstMIB 1 }
bosPvrstTrapsControl OBJECT IDENTIFIER ::= { bosPvrstMIB 2 }
bosPvrstTraps OBJECT IDENTIFIER ::= { bosPvrstMIB 3 }
-- bosPvrst group
bosPvrstSystemControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative shutdown status requested by management for the Pvrst
feature. The value start (1) indicates that Pvrst should be active in
the device on all ports. The value shutdown (2) indicates that Pvrst
should be shutdown in the device on all ports. All memory should
be released on all ports."
::= { bosPvrst 1 }
bosPvrstModuleStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the Pvrst
feature. The value enabled(1) indicates that Pvrst should be enabled
in the device on all ports. The value disabled(2) indicates that
Pvrst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, bosPvrstSystemControl set to start."
::= { bosPvrst 2 }
bosPvrstNoOfActiveInstances OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates number of instances active currently"
::= { bosPvrst 3 }
bosPvrstBrgAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with bosPvrstInstBridgePriority or
bosPvrstInstBridgePriority a unique BridgeIdentifier
is formed which is used in the Spanning Tree Protocol."
::= { bosPvrst 4 }
bosPvrstUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Pvrst Module has been enabled."
::= { bosPvrst 5 }
bosPvrstDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times PVRST Module has been disabled."
::= { bosPvrst 6 }
bosPvrstTrace OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable Trace Statements for the Pvrst
Module in this context .
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources except Buffers
6 - All Failure Traces
7 - Buffer Traces
The remaining bits are unused. Combination of trace levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Trace Option to any value will cause the Debug Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive."
DEFVAL { 0 }
::= { bosPvrst 7 }
bosPvrstDebug OBJECT-TYPE
SYNTAX Integer32 (0..131071)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable Debug Statements in the PvrstP
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integer, represents a particular
level of Debug.
The mapping between the bit positions & the level of debug is
as follows:
0 - Init and Shutdown Debug statements
1 - Management Debug statements
2 - Memory related Debug statements
3 - BPDU related Debug statements
4 - Event Handling Debug statements
5 - Timer Module Debug statements
6 - Port Information SEM Debug statements
7 - Port Receive SEM Debug statements (valid in the case of PvrstP alone)
8 - Role Selection SEM Debug statements
9 - Role Transition SEM Debug statements
10 - State Transition SEM Debug statements
11 - Protocol Migration SEM Debug statements
12 - Topology Change SEM Debug statements
13 - Port Transmit SEM Debug statements
14 - Bridge Detection SEM Debug statements
15 - All Failure Debug statements
16 - Redundancy code flow Debug statements
The remaining bits are unused. Combination of debug levels are
also allowed.
For example if the bits 0 and 1 are set, then the Debug
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Debug Option to any value will cause the Trace Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive."
DEFVAL { 0 }
::= { bosPvrst 8 }
bosPvrstBufferOverFlowCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Buffer overflows/failures have occured.
A Trap is generated on the occurence of this event."
::= { bosPvrst 9 }
bosPvrstMemAllocFailureCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times memory allocation failures have occured.
A Trap is generated on the occurence of this event."
::= { bosPvrst 10 }
bosPvrstUplinkFastStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the uplinkfast
PVRST feature. The value enabled(1) indicates that uplinkfast Pvrst feature
should be enabled on the device. The value disabled(2) indicates that
uplinkfast Pvrst feature should be disabled on the device.
The object can be set to enabled(1) if and only if, bosPvrstSystemControl
set to start."
::= { bosPvrst 12 }
bosPvrstUplinkFastMaxRate OBJECT-TYPE
SYNTAX Integer32 (10..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets the update rate to the number given in the range of 10-200.
This object is applicable when uplinkfast PVRST feature is enabled on the system."
DEFVAL { 40 }
::= { bosPvrst 13 }
-- -------------------------------------
-- bosPvrstPortTable - Start
-- -------------------------------------
bosPvrstPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPvrstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Ports per Virtual Context ."
::= { bosPvrst 14 }
bosPvrstPortEntry OBJECT-TYPE
SYNTAX BosPvrstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual Context Pvrst Module Port Parameters."
INDEX { bosPvrstPort }
::= { bosPvrstPortTable 1 }
BosPvrstPortEntry ::=
SEQUENCE {
bosPvrstPort
Integer32,
bosPvrstPortAdminEdgeStatus
TruthValue,
bosPvrstPortOperEdgePortStatus
TruthValue,
bosPvrstBridgeDetectionSemState
INTEGER,
bosPvrstPortAdminPointToPoint
INTEGER,
bosPvrstPortOperPointToPoint
TruthValue,
bosPvrstPortBpduGuard
TruthValue
}
bosPvrstPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Number for the Context"
::= { bosPvrstPortEntry 1 }
bosPvrstPortAdminEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
::= { bosPvrstPortEntry 2 }
bosPvrstPortOperEdgePortStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
bosPvrstPortAdminEdgeStatus and is set FALSE on reception
of a BPDU."
::= { bosPvrstPortEntry 3 }
bosPvrstBridgeDetectionSemState OBJECT-TYPE
SYNTAX INTEGER {
edge (0),
notedge (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the bridge detetion state machine
of this port for all Spanning Tree context"
::= { bosPvrstPortEntry 4 }
bosPvrstPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { bosPvrstPortEntry 5 }
bosPvrstPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the bosPvrstInstPortAdminP2P object."
::= { bosPvrstPortEntry 6 }
bosPvrstPortBpduGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value for the BPDU guard
is configurable on this Port "
::= { bosPvrstPortEntry 7 }
-- -------------------------------------
-- bosPvrstPortTable - End
-- -------------------------------------
-- -----------------------------------------------------------------
-- BNT Per Vlan Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
bosPvrstInstBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPvrstInstBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance. This table maintains context ID as one
more index to support Multiple Instances."
::= { bosPvrst 15 }
bosPvrstInstBridgeEntry OBJECT-TYPE
SYNTAX BosPvrstInstBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { bosPvrstInstInstanceIndex }
::= { bosPvrstInstBridgeTable 1 }
BosPvrstInstBridgeEntry ::=
SEQUENCE {
bosPvrstInstInstanceIndex
INTEGER,
bosPvrstInstBridgePriority
INTEGER,
bosPvrstInstRootCost
Integer32,
bosPvrstInstRootPort
Integer32,
bosPvrstInstBridgeMaxAge
Timeout,
bosPvrstInstBridgeHelloTime
Timeout,
bosPvrstInstBridgeForwardDelay
Timeout,
bosPvrstInstHoldTime
Integer32,
bosPvrstInstTimeSinceTopologyChange
TimeTicks,
bosPvrstInstTopChanges
Counter32,
bosPvrstInstNewRootCount
Counter32,
bosPvrstInstInstanceUpCount
Counter32,
bosPvrstInstInstanceDownCount
Counter32,
bosPvrstInstPortRoleSelSemState
Integer32,
bosPvrstInstDesignatedRoot
BridgeId,
bosPvrstInstRootMaxAge
Timeout,
bosPvrstInstRootHelloTime
Timeout,
bosPvrstInstRootForwardDelay
Timeout,
bosPvrstInstSetVlanList
OCTET STRING,
bosPvrstInstResetVlanList
OCTET STRING,
bosPvrstInstEnableStatus
EnabledStatus
}
bosPvrstInstInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs."
::= { bosPvrstInstBridgeEntry 1 }
bosPvrstInstBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the PVRST Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { bosPvrstInstBridgeEntry 2 }
bosPvrstInstRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the PVRST Root as seen
by this bridge."
::= { bosPvrstInstBridgeEntry 3 }
bosPvrstInstRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the PVRST Root Bridge."
::= { bosPvrstInstBridgeEntry 4 }
bosPvrstInstBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max Age of the Bridge Information"
::= { bosPvrstInstBridgeEntry 5 }
bosPvrstInstBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hello Time configured at Bridge Level"
::= { bosPvrstInstBridgeEntry 6 }
bosPvrstInstBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forward Delay for STP bridge interoperability"
::= { bosPvrstInstBridgeEntry 7 }
bosPvrstInstHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hold Time for eah port"
::= { bosPvrstInstBridgeEntry 8 }
bosPvrstInstTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for this spanning tree instance."
::= { bosPvrstInstBridgeEntry 9 }
bosPvrstInstTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance."
::= { bosPvrstInstBridgeEntry 10 }
bosPvrstInstNewRootCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for this spanning tree instance.
A Trap is generated on the occurence of this event."
::= { bosPvrstInstBridgeEntry 11 }
bosPvrstInstInstanceUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new spanning tree instance has
been created.
A Trap is generated on the occurence of this event."
::= { bosPvrstInstBridgeEntry 12 }
bosPvrstInstInstanceDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a spanning tree instance has
been deleted.
A Trap is generated on the occurence of this event."
::= { bosPvrstInstBridgeEntry 13 }
bosPvrstInstPortRoleSelSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
for this spanning tree instance for this bridge."
::= { bosPvrstInstBridgeEntry 14 }
bosPvrstInstDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node. "
::= { bosPvrstInstBridgeEntry 15 }
bosPvrstInstRootMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Age of the Root Port information"
::= { bosPvrstInstBridgeEntry 16 }
bosPvrstInstRootHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello Time configured for Root Port"
::= { bosPvrstInstBridgeEntry 17 }
bosPvrstInstRootForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay configured for the Root Port"
::= { bosPvrstInstBridgeEntry 18 }
bosPvrstInstSetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { bosPvrstInstBridgeEntry 19 }
bosPvrstInstResetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values."
::= { bosPvrstInstBridgeEntry 20 }
bosPvrstInstEnableStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the
PVRST feature per instance. The value enabled(1) indicates that
Pvrst feature should be enabled in the device for this particluar
STG instance. The value disabled(0) indicates that Pvrst feature
should be disabled in the device for this particular STG instance.
The object can be set to enabled(1) if and only if,
bosPvrstSystemControl set to start."
::= { bosPvrstInstBridgeEntry 21 }
-- -----------------------------------------------------------------
-- BNT Pvrst Common Spanning Tree Port Table
-- -----------------------------------------------------------------
bosPvrstInstPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPvrstInstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { bosPvrst 16 }
bosPvrstInstPortEntry OBJECT-TYPE
SYNTAX BosPvrstInstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Each Spanning tree."
INDEX { bosPvrstInstInstanceIndex,bosPvrstInstPortIndex }
::= { bosPvrstInstPortTable 1 }
BosPvrstInstPortEntry ::=
SEQUENCE {
bosPvrstInstPortIndex
INTEGER,
bosPvrstInstPortStatus
INTEGER,
bosPvrstInstPortPathCost
INTEGER,
bosPvrstInstPortPriority
INTEGER,
bosPvrstInstPortDesignatedRoot
BridgeId,
bosPvrstInstPortDesignatedBridge
BridgeId,
bosPvrstInstPortDesignatedPort
OCTET STRING,
bosPvrstInstPortOperVersion
Integer32,
bosPvrstInstPortProtocolMigration
TruthValue,
bosPvrstInstPortState
INTEGER,
bosPvrstInstPortForwardTransitions
Counter32,
bosPvrstInstPortReceivedBpdus
Counter32,
bosPvrstInstPortRxConfigBpduCount
Counter32,
bosPvrstInstPortRxTcnBpduCount
Counter32,
bosPvrstInstPortTransmittedBpdus
Counter32,
bosPvrstInstPortTxConfigBpduCount
Counter32,
bosPvrstInstPortTxTcnBpduCount
Counter32,
bosPvrstInstPortInvalidBpdusRcvd
Counter32,
bosPvrstInstPortInvalidConfigBpduRxCount
Counter32,
bosPvrstInstPortInvalidTcnBpduRxCount
Counter32,
bosPvrstInstPortTxSemState
INTEGER,
bosPvrstInstPortProtMigrationSemState
INTEGER,
bosPvrstInstProtocolMigrationCount
Counter32,
bosPvrstInstPortRole
INTEGER,
bosPvrstInstCurrentPortRole
INTEGER,
bosPvrstInstPortInfoSemState
INTEGER,
bosPvrstInstPortRoleTransitionSemState
INTEGER,
bosPvrstInstPortStateTransitionSemState
INTEGER,
bosPvrstInstPortTopologyChangeSemState
INTEGER,
bosPvrstInstPortEffectivePortState
TruthValue,
bosPvrstInstPortHelloTime
Timeout,
bosPvrstInstPortMaxAge
Timeout,
bosPvrstInstPortForwardDelay
Timeout,
bosPvrstInstPortHoldTime
Timeout
}
bosPvrstInstPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Id of the port for which this entry contains
spanning tree information."
::= { bosPvrstInstPortEntry 1 }
bosPvrstInstPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port status for this spanning tree"
::= { bosPvrstInstPortEntry 2 }
bosPvrstInstPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the Inst Root which include this port."
::= { bosPvrstInstPortEntry 3 }
bosPvrstInstPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the InstPortPriority value. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { bosPvrstInstPortEntry 4 }
bosPvrstInstPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
Inst Root in the configuration BPDUs transmitted."
::= { bosPvrstInstPortEntry 5 }
bosPvrstInstPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { bosPvrstInstPortEntry 6 }
bosPvrstInstPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { bosPvrstInstPortEntry 7 }
bosPvrstInstPortOperVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates whether the Port is operationally in the Pvrst
mode, Rstp mode or the Stp-compatible mode i.e., whether the
Port is transmitting Pvrst BPDUs, RST BPDUs or Config/TCN BPDUs."
::= { bosPvrstInstPortEntry 8 }
bosPvrstInstPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Protocol migration state of this Port.
When operating in RSTP/Pvrst (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit RSTP
BPDUs without instance information.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
::= { bosPvrstInstPortEntry 9 }
bosPvrstInstPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { bosPvrstInstPortEntry 10 }
bosPvrstInstPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this port has transitioned to the
Forwarding State."
::= { bosPvrstInstPortEntry 11 }
bosPvrstInstPortReceivedBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Pvrst BPDUs received on this port."
::= { bosPvrstInstPortEntry 12 }
bosPvrstInstPortRxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs received on this port."
::= { bosPvrstInstPortEntry 13 }
bosPvrstInstPortRxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs received on this port."
::= { bosPvrstInstPortEntry 14 }
bosPvrstInstPortTransmittedBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Pvrst BPDUs Transmitted from this port."
::= { bosPvrstInstPortEntry 15 }
bosPvrstInstPortTxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDUs Transmitted from this port."
::= { bosPvrstInstPortEntry 16 }
bosPvrstInstPortTxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDUs Transmitted from this port."
::= { bosPvrstInstPortEntry 17 }
bosPvrstInstPortInvalidBpdusRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid Pvrst BPDUs Received on this port."
::= { bosPvrstInstPortEntry 18 }
bosPvrstInstPortInvalidConfigBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid Configuration BPDUs Received on this port."
::= { bosPvrstInstPortEntry 19 }
bosPvrstInstPortInvalidTcnBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid TCN BPDUs Received on this port."
::= { bosPvrstInstPortEntry 20 }
bosPvrstInstPortTxSemState OBJECT-TYPE
SYNTAX INTEGER {
transmitinit (0),
transmitperiodic (1),
transmitconfig (2),
transmittcn (3),
transmitrstp (4),
idle (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Transmit state machine."
::= { bosPvrstInstPortEntry 21 }
bosPvrstInstPortProtMigrationSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
sendrstp (1),
sendingrstp (2),
sendstp (3),
sendingstp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current State of the Port Protocol Migration
State machine."
::= { bosPvrstInstPortEntry 22 }
bosPvrstInstProtocolMigrationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and
RSTP/Pvrst.
A Trap is generated on the occurence of this event."
::= { bosPvrstInstPortEntry 23 }
bosPvrstInstPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning
tree instance."
::= { bosPvrstInstPortEntry 24 }
bosPvrstInstCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { bosPvrstInstPortEntry 25 }
bosPvrstInstPortInfoSemState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
aged (1),
update (2),
superiordesg (3),
repeatdesg (4),
aggerment(5),
present (6),
receive (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Information State Machine
for this port in this spanning tree context."
::= { bosPvrstInstPortEntry 26 }
bosPvrstInstPortRoleTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
blockport (1),
blockedport (2),
rootport(3),
designatedport(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Transition State Machine
for this port in this spanning tree context."
::= { bosPvrstInstPortEntry 27 }
bosPvrstInstPortStateTransitionSemState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port State Transition State Machine
for this port in this spanning tree context."
::= { bosPvrstInstPortEntry 28 }
bosPvrstInstPortTopologyChangeSemState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
inactive (1),
active (2),
detected (3),
notifiedtcn (4),
notifiedtc (5),
propagating (6),
acknowledged (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Topology Change State Machine
for this port in this spanning tree context."
::= { bosPvrstInstPortEntry 29 }
bosPvrstInstPortEffectivePortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The effective operational state of the port for Inst. This will
TRUE only when the port is operationally up in the Interface level
and Protocol level for Inst. This is will be set to False for all
other times."
::= { bosPvrstInstPortEntry 30 }
bosPvrstInstPortHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on this port
in units of hundredths of a second."
::= { bosPvrstInstPortEntry 31 }
bosPvrstInstPortMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Age of the Bridge Information"
::= { bosPvrstInstPortEntry 32 }
bosPvrstInstPortForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay for STP bridge interoperability"
::= { bosPvrstInstPortEntry 33 }
bosPvrstInstPortHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hold Time for eah port"
::= { bosPvrstInstPortEntry 34 }
-- TRAP MIB BEGIN
bosPvrstSetGlobalTrapOption OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable PvrstP traps for memory
failure or buffer failure irrespective of the context in which
the failure occurs.
0 - Traps are not enabled.
1 - Memory and buffer failure traps enabled"
::= { bosPvrstTrapsControl 1 }
bosPvrstGlobalErrTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
memfail (1),
bufffail (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used within the Trap Notification PDU.
It returns the following values
none - none of the below values
memfail - memory allocation failure
bufffail - buffer allocation failure"
::= { bosPvrstTrapsControl 2 }
bosPvrstSetTraps OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable context-specific
PvrstP traps. Currently the following are defined
0 - Traps are not enabled.
1 - General Traps like protocol up or down
2 - Exception Traps like port protocol migration or
invalid packet rcvd in port
3 - All the above Traps "
::= { bosPvrstTrapsControl 3 }
bosPvrstGenTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used within the Trap Notification PDU.
It denotes general events like
none - none of the below values
up - protocol UP,
down - protocol DOWN"
::= { bosPvrstTrapsControl 4 }
bosPvrstPortTrapNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPvrstPortTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to store the notification information
occured in each of the port for protocol migration and
invalid packet received. This table is maintained per virtual
context in the system."
::= { bosPvrstTrapsControl 5 }
bosPvrstPortTrapNotificationEntry OBJECT-TYPE
SYNTAX BosPvrstPortTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This entry is used to store the notification information"
INDEX { bosPvrstPortTrapIndex}
::= { bosPvrstPortTrapNotificationTable 1 }
BosPvrstPortTrapNotificationEntry ::=
SEQUENCE {
bosPvrstPortTrapIndex
Integer32,
bosPvrstPortMigrationType
INTEGER,
bosPvrstPktErrType
INTEGER,
bosPvrstPktErrVal
INTEGER
}
bosPvrstPortTrapIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, indicating the Port number."
::= { bosPvrstPortTrapNotificationEntry 1 }
bosPvrstPortMigrationType OBJECT-TYPE
SYNTAX INTEGER {
sendstp (0),
sendrstp (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Protocol migration type occured in the port"
::= { bosPvrstPortTrapNotificationEntry 2 }
bosPvrstPktErrType OBJECT-TYPE
SYNTAX INTEGER {
protocolIdErr(0),
invalidBpdu(1),
configLengthErr(2),
tcnLengthErr(3),
rstpLengthErr(4),
maxAgeErr(5),
fwdDelayErr(6),
helloTimeErr(7),
pvrstpLengthErr(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of invalid packet received in each of the port "
::= { bosPvrstPortTrapNotificationEntry 3 }
bosPvrstPktErrVal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet error value corresponding to the above type "
::= { bosPvrstPortTrapNotificationEntry 4 }
bosPvrstNotifyTraps OBJECT IDENTIFIER ::= { bosPvrstTraps 0 }
bosPvrstGlobalErrTrap NOTIFICATION-TYPE
OBJECTS {
bosPvrstBrgAddress,
bosPvrstGlobalErrTrapType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when any of the error events like memory failure or buffer failure
or protocol migration or new root or topology change occurs "
::= { bosPvrstNotifyTraps 1 }
bosPvrstGenTrap NOTIFICATION-TYPE
OBJECTS {
bosPvrstBrgAddress,
bosPvrstGenTrapType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when any of the general events like protocol up or
protocol down occurs"
::= { bosPvrstNotifyTraps 2 }
bosPvrstNewRootTrap NOTIFICATION-TYPE
OBJECTS {
bosPvrstBrgAddress,
bosPvrstInstDesignatedRoot,
bosPvrstInstInstanceIndex,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated whenever a new root bridge is selected in the topology "
::= { bosPvrstNotifyTraps 3 }
bosPvrstTopologyChgTrap NOTIFICATION-TYPE
OBJECTS {
bosPvrstBrgAddress,
bosPvrstInstInstanceIndex,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when topology change is detected "
::= { bosPvrstNotifyTraps 4 }
bosPvrstProtocolMigrationTrap NOTIFICATION-TYPE
OBJECTS {
bosPvrstBrgAddress,
bosPvrstPortTrapIndex,
bosPvrstPortMigrationType,
bosPvrstInstInstanceIndex,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when port protocol migration happens in the port "
::= { bosPvrstNotifyTraps 5 }
bosPvrstInvalidBpduRxdTrap NOTIFICATION-TYPE
OBJECTS {
bosPvrstBrgAddress,
bosPvrstPortTrapIndex,
bosPvrstPktErrType,
bosPvrstPktErrVal,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when the invalid packet is received for
bpdu/stp/rstp/maximum age/forward delay/hello time"
::= { bosPvrstNotifyTraps 6 }
-- ----------------------------------------------------------------------------
-- } INSERT: pvrst
-- ----------------------------------------------------------------------------
-- TRAP MIB END
-- END
bosRstMIB OBJECT IDENTIFIER ::= { ex2500 79 }
-- ----------------------------------------------------------------------------
-- { INSERT: rst
-- ----------------------------------------------------------------------------
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
dot1wBosRst OBJECT IDENTIFIER ::= { bosRstMIB 1 }
dot1wBosRstTrapsControl OBJECT IDENTIFIER ::= { bosRstMIB 2 }
dot1wBosRstTraps OBJECT IDENTIFIER ::= { bosRstMIB 3 }
-- dot1wBosRst group
-- SCALAR BEGIN
bosRstSystemControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative system control status requested by management for
the RSTP feature. The value 'start'(1) indicates that all resources
required by RSTP should be allocated and RSTP should be supported
in the device on all ports. The value shutdown(2) indicates that RSTP
should be shutdown in the device on all ports and all allocated memory
must be released."
::= { dot1wBosRst 1 }
bosRstModuleStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status requested by management for the RSTP
Module. This enables or disables RSTP in the system. A value of 'enabled'
(1) indicates that RSTP must be enabled in the device on all the ports.
A value of 'disabled'(2) indicates that RSTP must be disabled in the
device on all the ports. This object can be set only after the object
bosRstSystemControl has been set."
::= {dot1wBosRst 2 }
-- SCALAR STOP
-- -------------------------------------
-- RSTP Port Extention Group
-- -------------------------------------
-- SCALAR ADDED
bosRstDynamicPathcostCalculation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed, otherwise the link speed at the time of port
creation is used for calculating the path cost. In both cases
if the user has configured a pathcost for the port that will be
used. By default dynamic pathcost calculation is set to false."
DEFVAL { false }
::= { dot1wBosRst 4 }
bosRstOldDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the old root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. "
::= { dot1wBosRst 5 }
-- SCALAR STOP
-- TRAP MIB BEGIN
bosRstSetTraps OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable specific
RSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - General Traps like protocol up or down
2 - Exception Traps like memory failure or buffer failure
or port protocol migration or invalid packet rcvd in port
3 - All the above Traps "
::= { dot1wBosRstTrapsControl 1 }
bosRstGenTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The general events like
none - none of the below values
up - protocol UP,
down - protocol DOWN"
::= { dot1wBosRstTrapsControl 2 }
bosRstErrTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
memfail (1),
bufffail (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error event like
none - none of the below values
memfail - memory allocation failure
bufffail - buffer allocation failure"
::= { dot1wBosRstTrapsControl 3 }
bosRstPortTrapNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosRstPortTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table is used to store the notification information
occurred in each of the port for protocol migration and
invalid packet received "
::= { dot1wBosRstTrapsControl 4 }
bosRstPortTrapNotificationEntry OBJECT-TYPE
SYNTAX BosRstPortTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This entry is used to store the notification information"
INDEX { bosRstPortTrapIndex}
::= { bosRstPortTrapNotificationTable 1 }
BosRstPortTrapNotificationEntry ::=
SEQUENCE {
bosRstPortTrapIndex
Integer32,
bosRstPortMigrationType
INTEGER,
bosRstPktErrType
INTEGER,
bosRstPktErrVal
Integer32,
bosRstPortRoleType
INTEGER,
bosRstOldRoleType
INTEGER
}
bosRstPortTrapIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, indicating the Port number."
::= { bosRstPortTrapNotificationEntry 1 }
bosRstPortMigrationType OBJECT-TYPE
SYNTAX INTEGER {
sendstp (0),
sendrstp (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Protocol migration type occurred in the port"
::= { bosRstPortTrapNotificationEntry 2 }
bosRstPktErrType OBJECT-TYPE
SYNTAX INTEGER {
protocolIdErr(0),
invalidBpdu(1),
configLengthErr(2),
tcnLengthErr(3),
rstpLengthErr(4),
maxAgeErr(5),
fwdDelayErr(6),
helloTimeErr(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of invalid packet received in each of the port "
::= { bosRstPortTrapNotificationEntry 3 }
bosRstPktErrVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet error value corresponding to the above type "
::= { bosRstPortTrapNotificationEntry 4 }
bosRstPortRoleType OBJECT-TYPE
SYNTAX INTEGER {
disabledPort(0),
alternatePort(1),
backupPort(2),
rootPort(3),
designatedPort(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Particular Role Selected for the Port"
::= { bosRstPortTrapNotificationEntry 5 }
bosRstOldRoleType OBJECT-TYPE
SYNTAX INTEGER {
disabledPort(0),
alternatePort(1),
backupPort(2),
rootPort(3),
designatedPort(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Particular Role which is existing for the Port"
::= { bosRstPortTrapNotificationEntry 6 }
bosRstTraps OBJECT IDENTIFIER ::= { dot1wBosRstTraps 0 }
bosRstGenTrap NOTIFICATION-TYPE
OBJECTS {
dot1dBaseBridgeAddress,
bosRstGenTrapType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when any of the general events like protocol up or
protocol down occurrs"
::= { bosRstTraps 1 }
bosRstErrTrap NOTIFICATION-TYPE
OBJECTS {
dot1dBaseBridgeAddress,
bosRstErrTrapType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when any of the error events like memory failure or buffer failure
or protocol migration or new root or topology change occurrs "
::= { bosRstTraps 2 }
bosRstNewRootTrap NOTIFICATION-TYPE
OBJECTS {
dot1dBaseBridgeAddress,
bosRstOldDesignatedRoot,
dot1dStpDesignatedRoot,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated whenever a new root bridge is selected in the topology "
::= { bosRstTraps 3 }
bosRstTopologyChgTrap NOTIFICATION-TYPE
OBJECTS {
dot1dBaseBridgeAddress,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when topology change is detected "
::= { bosRstTraps 4 }
bosRstProtocolMigrationTrap NOTIFICATION-TYPE
OBJECTS {
dot1dBaseBridgeAddress,
dot1dStpVersion,
bosRstPortMigrationType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when port protocol migration happens in the port "
::= { bosRstTraps 5 }
bosRstInvalidBpduRxdTrap NOTIFICATION-TYPE
OBJECTS {
dot1dBaseBridgeAddress,
bosRstPktErrType,
bosRstPktErrVal,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when the invalid packet is received for
bpdu/stp/rstp/maximum age/forward delay/hello time"
::= { bosRstTraps 6 }
bosRstNewPortRoleTrap NOTIFICATION-TYPE
OBJECTS {
dot1dBaseBridgeAddress,
bosRstPortRoleType,
bosRstOldRoleType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated whenever a new role is selected for the port "
::= { bosRstTraps 7 }
-- TRAP MIB STOP
-- ----------------------------------------------------------------------------
-- } INSERT: rst
-- ----------------------------------------------------------------------------
bosMstMIB OBJECT IDENTIFIER ::= { ex2500 80 }
-- ----------------------------------------------------------------------------
-- { INSERT: mst
-- ----------------------------------------------------------------------------
VlanId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A 12-bit VLAN ID used in the VLAN Tag header."
SYNTAX Integer32 (1..4094)
BridgeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Identifier of Bridge in 8 byte format"
SYNTAX OCTET STRING (SIZE (8))
Timeout ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d4"
STATUS current
DESCRIPTION
" Time out value in 4 byte"
SYNTAX Integer32
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
dot1sBosMst OBJECT IDENTIFIER ::= { bosMstMIB 1 }
dot1sBosMstTrapsControl OBJECT IDENTIFIER ::= { bosMstMIB 2 }
dot1sBosMstTraps OBJECT IDENTIFIER ::= { bosMstMIB 3 }
-- dot1qBosMst group
-- SCALAR BEGIN
bosMstSystemControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative shutdown status requested by management for the MST
feature. The value start (1) indicates that MST should be active in
the device on all ports. The value shutdown (2) indicates that MST
should be shutdown in the device on all ports. All memory should
be released on all ports."
::= { dot1sBosMst 1 }
bosMstMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (4..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Maximum hope count is the maximum number of hops
that the information for a particular Spanning Tree
instance may traverse (via relay of BPDUs within the
applicable MST region) before being discarded."
DEFVAL { 20 }
::= { dot1sBosMst 3 }
bosMstBrgAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with bosMstCistBridgePriority or
bosMstMstiBridgePriority a unique BridgeIdentifier
is formed which is used in the Spanning Tree Protocol."
::= { dot1sBosMst 4 }
bosMstCistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { dot1sBosMst 5 }
bosMstCistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { dot1sBosMst 6 }
bosMstCistRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Root as seen
from this bridge."
::= { dot1sBosMst 7 }
bosMstCistRegionalRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root
as seen from this bridge."
::= { dot1sBosMst 8 }
bosMstCistRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge."
::= { dot1sBosMst 9 }
bosMstCistBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { dot1sBosMst 10 }
bosMstCistBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {20}
::= { dot1sBosMst 11 }
bosMstCistBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {15}
::= { dot1sBosMst 12 }
bosMstCistMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of a second. This is the actual value that this
bridge is currently using."
::= { dot1sBosMst 13 }
bosMstCistForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of a second,
controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state."
::= { dot1sBosMst 14 }
bosMstMstiRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration. By Default
Region Name is NULL."
::= { dot1sBosMst 15 }
bosMstMstiRegionVersion OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { dot1sBosMst 16 }
bosMstMstiConfigDigest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Configuration Digest value for this Region."
::= { dot1sBosMst 17 }
bosMstBufferOverFlowCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Buffer overflows/failures have occured.
A Trap is generated on the occurence of this event."
::= { dot1sBosMst 18 }
bosMstMemAllocFailureCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times memory allocation failures have occured.
A Trap is generated on the occurence of this event."
::= { dot1sBosMst 19 }
bosMstRegionConfigChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a Region Configuration Identifier Change
was detected.
A Trap is generated on the occurence of this event."
::= { dot1sBosMst 20 }
bosMstCistBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
of this bridge in Common Spanning Tree context"
::= { dot1sBosMst 21 }
-- bosMstCistTimeSinceTopologyChange OBJECT-TYPE
-- SYNTAX TimeTicks
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The time (in hundredths of a second) since the
-- TcWhile Timer for any port in this Bridge was
-- non-zero for Common Spanning Tree context."
-- ::= { dot1sBosMst 22 }
bosMstCistTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for Common
Spanning Tree context."
::= { dot1sBosMst 23 }
bosMstCistNewRootBridgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for Common Spanning Tree context.
A Trap is generated on the occurence of this event."
::= { dot1sBosMst 24 }
bosMstCistHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of a second,
specifies the amount of time between
the transmission of configuration BPDUs by this node
on any port when it is the root of the spanning tree
or trying to become so."
::= { dot1sBosMst 25 }
bosMstCistBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of a second."
::= { dot1sBosMst 26 }
-- SCALAR STOP
-- -----------------------------------------------------------------
-- Bos Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
bosMstMstiBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance."
::= { dot1sBosMst 27 }
bosMstMstiBridgeEntry OBJECT-TYPE
SYNTAX BosMstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { bosMstMstiInstanceIndex }
::= { bosMstMstiBridgeTable 1 }
BosMstMstiBridgeEntry ::=
SEQUENCE {
bosMstMstiInstanceIndex
Integer32,
bosMstMstiBridgeRegionalRoot
BridgeId,
bosMstMstiBridgePriority
Integer32,
bosMstMstiRootCost
Integer32,
bosMstMstiRootPort
Integer32,
-- bosMstMstiTimeSinceTopologyChange
-- TimeTicks,
bosMstMstiTopChanges
Counter32,
bosMstMstiNewRootBridgeCount
Counter32,
bosMstMstiBridgeRoleSelectionSemState
INTEGER,
bosMstInstanceUpCount
Counter32,
bosMstInstanceDownCount
Counter32,
bosMstOldDesignatedRoot
BridgeId
}
bosMstMstiInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs."
::= { bosMstMstiBridgeEntry 1 }
bosMstMstiBridgeRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this node"
::= { bosMstMstiBridgeEntry 2 }
bosMstMstiBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { bosMstMstiBridgeEntry 3 }
bosMstMstiRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the MSTI Regional Root as seen
by this bridge."
::= { bosMstMstiBridgeEntry 4 }
bosMstMstiRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the MSTI Region Root Bridge."
::= { bosMstMstiBridgeEntry 5 }
-- bosMstMstiTimeSinceTopologyChange OBJECT-TYPE
-- SYNTAX TimeTicks
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The time (in hundredths of a second) since the
-- TcWhile Timer for any port in this Bridge was
-- non-zero for this spanning tree instance."
-- ::= { bosMstMstiBridgeEntry 6 }
bosMstMstiTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance."
::= { bosMstMstiBridgeEntry 7 }
bosMstMstiNewRootBridgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Bridge has detected a Root
Bridge change for this spanning tree instance.
A Trap is generated on the occurence of this event."
::= { bosMstMstiBridgeEntry 8 }
bosMstMstiBridgeRoleSelectionSemState OBJECT-TYPE
SYNTAX INTEGER {
initbridge (0),
roleselection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port Role Selection State Machine
for this spanning tree instance for this bridge."
::= { bosMstMstiBridgeEntry 9 }
bosMstInstanceUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new spanning tree instance has
been created.
A Trap is generated on the occurence of this event."
::= { bosMstMstiBridgeEntry 10 }
bosMstInstanceDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a spanning tree instance has
been deleted.
A Trap is generated on the occurence of this event."
::= { bosMstMstiBridgeEntry 11 }
bosMstOldDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node. "
::= { bosMstMstiBridgeEntry 12 }
-- -----------------------------------------------------------------
-- Bos Mst VlanId to Instance Mapping Table
-- -----------------------------------------------------------------
bosMstVlanInstanceMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMstVlanInstanceMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each instance of MSTP."
::= { dot1sBosMst 28 }
bosMstVlanInstanceMappingEntry OBJECT-TYPE
SYNTAX BosMstVlanInstanceMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the status of the MSTP instance."
INDEX { bosMstInstanceIndex }
::= { bosMstVlanInstanceMappingTable 1 }
BosMstVlanInstanceMappingEntry ::=
SEQUENCE {
bosMstInstanceIndex
Integer32,
bosMstMapVlanIndex
VlanId,
bosMstUnMapVlanIndex
VlanId,
bosMstSetVlanList
OCTET STRING,
bosMstResetVlanList
OCTET STRING,
bosMstInstanceVlanMapped
OCTET STRING,
bosMstInstanceVlanMapped2k
OCTET STRING,
bosMstInstanceVlanMapped3k
OCTET STRING,
bosMstInstanceVlanMapped4k
OCTET STRING
}
bosMstInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance."
::= { bosMstVlanInstanceMappingEntry 1 }
bosMstMapVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VlanId will get mapped to the spanning tree instance
specified. All the Instance Specific information for the
Member ports of the Vlan will be created.This object is
used only for SET operation.GET Operation returns null values.
If the VlanId to Instance Mapping has to be known then any
one of the VlanMapped object should be used."
::= { bosMstVlanInstanceMappingEntry 2 }
bosMstUnMapVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VlanId will get unmapped from spanning tree instance
to which it it mapped. All the Instance Specific information
for the Member ports of the Vlan will get released.This object
is used only for SET operation.GET Operation returns null values."
::= { bosMstVlanInstanceMappingEntry 3 }
bosMstSetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { bosMstVlanInstanceMappingEntry 4 }
bosMstResetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values."
::= { bosMstVlanInstanceMappingEntry 5 }
bosMstInstanceVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { bosMstVlanInstanceMappingEntry 6 }
bosMstInstanceVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { bosMstVlanInstanceMappingEntry 7 }
bosMstInstanceVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { bosMstVlanInstanceMappingEntry 8 }
bosMstInstanceVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { bosMstVlanInstanceMappingEntry 9 }
-- -----------------------------------------------------------------
-- Bos Mst Multiple Spanning Tree Instance Port Table
-- -----------------------------------------------------------------
bosMstMstiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Spanning Tree Instance Specific Port
Information."
::= { dot1sBosMst 30 }
bosMstMstiPortEntry OBJECT-TYPE
SYNTAX BosMstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for each
and every spanning tree instance."
INDEX { bosMstMstiPort, bosMstInstanceIndex }
::= { bosMstMstiPortTable 1 }
BosMstMstiPortEntry ::=
SEQUENCE {
bosMstMstiPort
Integer32,
bosMstMstiPortPathCost
Integer32,
bosMstMstiPortPriority
Integer32,
bosMstMstiPortDesignatedRoot
BridgeId,
bosMstMstiPortDesignatedBridge
BridgeId,
bosMstMstiPortDesignatedPort
OCTET STRING,
bosMstMstiPortState
INTEGER,
bosMstMstiForcePortState
INTEGER,
bosMstMstiPortDesignatedCost
Integer32,
bosMstMstiCurrentPortRole
INTEGER
}
bosMstMstiPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { bosMstMstiPortEntry 1 }
bosMstMstiPortPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { bosMstMstiPortEntry 2 }
bosMstMstiPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { bosMstMstiPortEntry 3 }
bosMstMstiPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted."
::= { bosMstMstiPortEntry 4 }
bosMstMstiPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { bosMstMstiPortEntry 5 }
bosMstMstiPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { bosMstMstiPortEntry 6 }
bosMstMstiPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance."
::= { bosMstMstiPortEntry 7 }
bosMstMstiForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'bosMstCistForcePortState' is set to 'enabled' for this port"
::= { bosMstMstiPortEntry 8 }
bosMstMstiPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { bosMstMstiPortEntry 9 }
bosMstMstiCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { bosMstMstiPortEntry 10 }
-- SCALAR ADDED
bosMstCistDynamicPathcostCalculation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed, otherwise the link speed at the time of port
creation is used for calculating the path cost. In both cases
if the user has configured a pathcost for the port that will be
used. By default dynamic pathcost calculation is set to false."
DEFVAL { false }
::= { dot1sBosMst 31 }
--SCALAR STOP
-- TRAP MIB BEGIN
bosMstSetTraps OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable and disable specific
MSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - General Traps like protocol up or down
2 - Exception Traps like memory failure or buffer failure
or port protocol migration or invalid packet rcvd in port
3 - All the above Traps "
::= { dot1sBosMstTrapsControl 1 }
bosMstGenTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The general events like
none - none of the below values
up - protocol UP,
down - protocol DOWN"
::= { dot1sBosMstTrapsControl 2 }
bosMstErrTrapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
memfail (1),
bufffail (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error event like
none - none of the below values
memfail - memory allocation failure
bufffail - buffer allocation failure"
::= { dot1sBosMstTrapsControl 3 }
bosMstPortTrapNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMstPortTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to store the notification information
occured in each of the port for protocol migration and
invalid packet received"
::= { dot1sBosMstTrapsControl 4 }
bosMstPortTrapNotificationEntry OBJECT-TYPE
SYNTAX BosMstPortTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This entry is used to store the notification information"
INDEX { bosMstPortTrapIndex}
::= { bosMstPortTrapNotificationTable 1 }
BosMstPortTrapNotificationEntry ::=
SEQUENCE {
bosMstPortTrapIndex
Integer32,
bosMstPortMigrationType
INTEGER,
bosMstPktErrType
INTEGER,
bosMstPktErrVal
INTEGER
}
bosMstPortTrapIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, indicating the Port number."
::= { bosMstPortTrapNotificationEntry 1 }
bosMstPortMigrationType OBJECT-TYPE
SYNTAX INTEGER {
sendstp (0),
sendrstp (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Protocol migration type occured in the port"
::= { bosMstPortTrapNotificationEntry 2 }
bosMstPktErrType OBJECT-TYPE
SYNTAX INTEGER {
protocolIdErr(0),
invalidBpdu(1),
configLengthErr(2),
tcnLengthErr(3),
rstpLengthErr(4),
maxAgeErr(5),
fwdDelayErr(6),
helloTimeErr(7),
mstpLengthErr(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of invalid packet received in each of the port "
::= { bosMstPortTrapNotificationEntry 3 }
bosMstPktErrVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet error value corresponding to the above type "
::= { bosMstPortTrapNotificationEntry 4 }
bosMstPortRoleTrapNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMstPortRoleTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to store the notification information
occured in each of the port during role change."
::= { dot1sBosMstTrapsControl 5 }
bosMstPortRoleTrapNotificationEntry OBJECT-TYPE
SYNTAX BosMstPortRoleTrapNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This entry is used to store the notification information"
INDEX { bosMstPortTrapIndex, bosMstMstiInstanceIndex}
::= { bosMstPortRoleTrapNotificationTable 1 }
BosMstPortRoleTrapNotificationEntry ::=
SEQUENCE {
bosMstPortRoleType
INTEGER,
bosMstOldRoleType
INTEGER
}
bosMstPortRoleType OBJECT-TYPE
SYNTAX INTEGER {
disabledPort(0),
alternatePort(1),
backupPort(2),
rootPort(3),
designatedPort(4),
masterport(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Particular Role Selected for the Port"
::= { bosMstPortRoleTrapNotificationEntry 1 }
bosMstOldRoleType OBJECT-TYPE
SYNTAX INTEGER {
disabledPort(0),
alternatePort(1),
backupPort(2),
rootPort(3),
designatedPort(4),
masterport(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Particular Role which is existing for the Port"
::= { bosMstPortRoleTrapNotificationEntry 2 }
bosMstTraps OBJECT IDENTIFIER ::= { dot1sBosMstTraps 0 }
bosMstGenTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstGenTrapType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when any of the general events like protocol up or
protocol down occurs"
::= { bosMstTraps 1 }
bosMstErrTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstErrTrapType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when any of the error events like memory failure or buffer failure
or protocol migration or new root or topology change occurs "
::= { bosMstTraps 2 }
bosMstNewRootTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstOldDesignatedRoot,
bosMstMstiBridgeRegionalRoot,
bosMstMstiInstanceIndex,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated whenever a new root bridge is selected in the topology "
::= { bosMstTraps 3 }
bosMstTopologyChgTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstMstiInstanceIndex,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when topology change is detected "
::= { bosMstTraps 4 }
bosMstProtocolMigrationTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstPortMigrationType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when port protocol migration happens in the port "
::= { bosMstTraps 5 }
bosMstInvalidBpduRxdTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstPktErrType,
bosMstPktErrVal,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when the invalid packet is received for
bpdu/stp/rstp/maximum age/forward delay/hello time"
::= { bosMstTraps 6 }
bosMstRegionConfigChangeTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstMstiRegionName,
bosMstMstiRegionVersion,
bosMstMstiConfigDigest,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated when the MST region's configuration
identifier changes."
::= { bosMstTraps 7 }
bosMstNewPortRoleTrap NOTIFICATION-TYPE
OBJECTS {
bosMstBrgAddress,
bosMstPortRoleType,
bosMstOldRoleType,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"Generated whenever a new role is selected for the port "
::= { bosMstTraps 8 }
-- TRAP MIB STOP
-- ----------------------------------------------------------------------------
-- } INSERT: mst
-- ----------------------------------------------------------------------------
bos OBJECT IDENTIFIER ::= { ex2500 81 }
-- ----------------------------------------------------------------------------
-- { INSERT: bos
-- ----------------------------------------------------------------------------
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
bosSystem OBJECT IDENTIFIER ::= { bos 1 }
bosConfigControl OBJECT IDENTIFIER ::= { bos 2 }
-- ---------------------------------------------------------------- --
-- System Group
-- System Information
bosHardwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version number of the Hardware."
DEFVAL { "" }
::= { bosSystem 2 }
-- Configurtion Save related configuration / information
bosConfigSaveOption OBJECT-TYPE
SYNTAX INTEGER {
noSave(1),
flashSave(2),
remoteTftpSave(3),
startupConfig(4),
backupConfig(5),
remoteTftpRestore(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the configurations of the switch has to be
saved or not.
The value 'noSave' specifies that the configurations need
not be saved.
The value 'flashSave' specifies that the configurations need
to be saved in flash in the specified file name issConfigSaveFileName.
The value 'remoteSave' specifies that the configurations need
to be saved in specified remote system.
The value 'startupConfig' specifies that the configurations need
to be saved in flash in the 'Startup Configuration File'.
The value 'backupConfig' specifies that the configurations need
to be saved in flash in the 'backup Configuration File'.
The value 'remoteTftpRestore' specifies that the configurations need
to be restored from remote system and saved in the file as indicated by
'bosConfigRemoteType'. This configuration are copied to configuration blocks
and applied after restart."
DEFVAL { noSave }
::= { bosSystem 10 }
bosConfigSaveFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the file in which the switch configurations are
to be saved.
This object is valid only if 'issConfigSaveOption' is chosen
to be 'flashSave' or 'remoteSave'."
DEFVAL { "iss.conf" }
::= { bosSystem 12 }
bosConfigSaveStatus OBJECT-TYPE
SYNTAX INTEGER {
saveInProgress(1),
saveSuccessful(2),
saveFailed(3),
notInitiated(4),
saveNotRequired(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of configuration save operation."
DEFVAL { notInitiated }
::= { bosSystem 14 }
bosConfigRestoreOption OBJECT-TYPE
SYNTAX INTEGER {
factory(1),
activeConfig(2),
backupConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the switch configurations have to be restored
or not.
The value 'factory' specifies that the switch configurations
need not be restored when the system is restarted.
The value 'activeConfig' specifies that the configurations
need to be restored from the 'Startup Configuration File' in the flash
when the system is restarted.
The value 'backupConfig' specifies that the configurations
need to be restored from the 'Backup Configuration File' in the flash
when the system is restarted."
DEFVAL { factory }
::= { bosSystem 15 }
bosConfigRestoreStatus OBJECT-TYPE
SYNTAX INTEGER {
restoreInprogress(1),
restoreSuccessful(2),
restoreFailed(3),
notInitiated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the switch configuration restore operation."
DEFVAL { notInitiated }
::= { bosSystem 19 }
bosLoggingOption OBJECT-TYPE
SYNTAX INTEGER {
console(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Logging option specifying whether the logging is to be
done at console or to a file(system buffer) in the system."
::= { bosSystem 26 }
-- Login Authentication mechanism
bosLoginAuthentication OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remoteRadius(2),
remoteTacacs(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism by which the user login to access the GUI for
configuration has to be authenticated. Authentication is done
either locally or in the remote side through a RADIUS Server."
::= { bosSystem 32 }
--bosSwitchBaseMacAddress OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Ethernet address (base address) of the Switch.
-- This base Mac Address, if modified, will take effect only when the
-- Switch is restarted."
--
-- DEFVAL { '000102030405'h }
-- ::= { bosSystem 33 }
bosSwitchDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The date is configured in the switch in the format,
Hours:Minutes:Seconds Day Month Year
e.g 19:10:31 11 08 2005
01-12 Month - beginning from January to December
The railway time 00 to 24 hours can be configured and
displayed.
The Display of the date is in the format ,
WeekDay Month Day Hours:Minutes:Seconds Year
e.g 04 09 21 18:11:30 2005
01-07 WeekDay - beginning from Sunday to Saturday
01-12 Month - beginning from January to December "
::= { bosSystem 35 }
bosHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling HTTP in the system."
DEFVAL { enable }
::= { bosSystem 39 }
bosConfigRestoreFileVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Config Restoration file version. This version will be compared in each
reboot against version stored in restoration file. Restoration
will occur only if the first field in restoration file is this OID and the
RestoreFileVersion value also matches."
::= { bosSystem 40 }
--#ifdef BNTGLUE_WANTED /* INCLUDE_BNT */
bosTelnetStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
enableInProgress(3),
disableInProgress(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the TELNET access to the
system. Set operation of enable will move this object to the
enableInProgress first and then to the enable state on successful
transition. Otherwise it will move back to the old state. Same applies
to the disable also.
enableInProgress and disableInProgres are not admin configurable values."
DEFVAL { enable }
::= { bosSystem 46 }
bosTimeZone OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timezone values can be 1-374. To unset Timezone use Value 0."
::= { bosSystem 47}
bosDayLightSaving OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DayLight Saving can be enabled/disabled."
::= { bosSystem 48}
bosLastBootTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Display of the date is in the format ,
WeekDay Month Day Hours:Minutes:Seconds Year
e.g 04 09 21 18:11:30 2005
01-07 WeekDay - beginning from Sunday to Saturday
01-12 Month - beginning from January to December "
::= { bosSystem 49}
bosAllocCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { bosSystem 50 }
bosReleaseCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of times the packet buffers are freed(released) to the
packet buffer pool by the TCP/IP protocol stack."
::= { bosSystem 51 }
bosAllocFailCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocation failures from the packet buffer
pool by the TCP/IP protocol stack."
::= { bosSystem 52 }
bosPeakUsageCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size greater than
128 bytes and less than or equal to 1536 bytes from the packet
buffer pool by the TCP/IP protocol stack."
::= { bosSystem 53 }
--endif /* INCLUDE_BNT */
------ Config Control Group ------------------------------------
bosConfigCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosConfigCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control device features like egress traffic control,
stats collection, etc. either for the entire switch or for each
interface in the switch."
::= { bosConfigControl 1 }
bosConfigCtrlEntry OBJECT-TYPE
SYNTAX BosConfigCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
In addition to that an entry with index '0' is created in this
table by default.
If 'bosConfigCtrlStatus' of the entry '0' is made 'valid', then
global control is chosen and the values against entry '0' is
applicable for all the interfaces of the switch.
If 'bosConfigCtrlStatus' of the entry '0' is made 'invalid',
then interface-wise control is chosen & the values against each
interface index is applicable for that interface.
At a particular point of time, either global control will be
applicable or interface-wise control is applicable.
Both will not be considered together.
Index to the table is the interface index of the port."
INDEX { bosConfigCtrlIndex }
::= { bosConfigCtrlTable 1 }
BosConfigCtrlEntry ::=
SEQUENCE {
bosConfigCtrlIndex
Integer32,
bosConfigCtrlEgressStatus
INTEGER,
bosConfigCtrlStatsCollection
INTEGER,
bosConfigCtrlStatus
INTEGER
}
bosConfigCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies.
If any configuration is made in this table for the index '0',
that configuration will be considered as global configuration
and is applicable for all the interfaces of the switch."
::= { bosConfigCtrlEntry 1 }
bosConfigCtrlEgressStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the transmission of egress traffic over this interface.
This value for entry '0' controls the egress traffic over all
interfaces."
DEFVAL { enabled }
::= { bosConfigCtrlEntry 2 }
bosConfigCtrlStatsCollection OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables statistics collection for this interface.
This value for entry '0' controls the stats collection for all
interfaces."
DEFVAL { enabled }
::= { bosConfigCtrlEntry 3 }
bosConfigCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the validity of the entry.
If the 'Config Control Status' for entry '0' is made 'valid',
then global control is chosen in the system.
It signifies that the values against entry '0' is applicable
for all the interfaces of the switch.
If the 'Config Control Status' for entry '0' is made 'invalid',
then interface-wise control is chosen.
Then the values against each interface index is applicable
for that interface.
By default, 'bosConfigCtrlStatus' will be 'invalid' for
entry '0' and 'valid' for all other entries.
(ie) by default, interface-wise configuration is enabled
in the system.
The status of entries other than the zeroth(0th) entry can not be
made 'invalid'."
::= { bosConfigCtrlEntry 4 }
-- Port Control Table
bosPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { bosConfigControl 2 }
bosPortCtrlEntry OBJECT-TYPE
SYNTAX BosPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { bosPortCtrlIndex }
::= { bosPortCtrlTable 1 }
BosPortCtrlEntry ::=
SEQUENCE {
bosPortCtrlIndex
Integer32,
bosPortCtrlMode
INTEGER,
bosPortCtrlDuplex
INTEGER,
bosPortCtrlSpeed
INTEGER,
bosPortCtrlFlowControl
INTEGER,
bosPortCtrlOperDuplex
INTEGER,
bosPortCtrlOperSpeed
INTEGER
-- bosPortCtrlRenegotiate
-- INTEGER,
-- bosPortCtrlMaxMacAddr
-- Integer32,
-- bosPortCtrlMaxMacAction
-- INTEGER,
-- bosPortHOLBlockPrevention
-- INTEGER
}
bosPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { bosPortCtrlEntry 1 }
bosPortCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
noNegotiation (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective."
DEFVAL { auto }
::= { bosPortCtrlEntry 2 }
bosPortCtrlDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2),
any (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'"
::= { bosPortCtrlEntry 3 }
bosPortCtrlSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4),
any (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'"
::= { bosPortCtrlEntry 4 }
bosPortCtrlFlowControl OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabledXmit(2),
enabledRcv(3),
enabledXmitAndRcv(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is used to configure the default
administrative PAUSE mode for this interface.
This object represents the
administratively-configured PAUSE mode for this
interface. If auto-negotiation is not enabled
or is not implemented for the active MAU
attached to this interface, the value of this
object determines the operational PAUSE mode
of the interface whenever it is operating in
full-duplex mode. In this case, a set to this
object will force the interface into the
specified mode.
If auto-negotiation is implemented and enabled
for the MAU attached to this interface, the
PAUSE mode for this interface is determined by
auto-negotiation, and the value of this object
denotes the mode to which the interface will
automatically revert if/when auto-negotiation is
later disabled. Note that when auto-negotiation
is running, administrative control of the PAUSE
mode may be accomplished using the
ifMauAutoNegCapAdvertisedBits object in the
MAU-MIB.
Note that the value of this object is ignored
when the interface is not operating in
full-duplex mode.
An attempt to set this object to
'enabledXmit(2)' or 'enabledRcv(3)' will fail
on interfaces that do not support operation
at greater than 100 Mb/s."
::= { bosPortCtrlEntry 5 }
bosPortCtrlOperDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the interface current data
transfer mode, as determined by either (1) the result of the
auto-negotiation function or (2) if auto-negotiation is not
enabled."
::= { bosPortCtrlEntry 6 }
bosPortCtrlOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the interface current speed
, as determined by either (1) the result of the
auto-negotiation function or (2) if auto-negotiation is not
enabled."
::= { bosPortCtrlEntry 7 }
--issPortCtrlFlowControl OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable (1),
-- disable (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enables / disables flow control for the interface.
-- This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
-- If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
-- after negotiating with its peer"
--
-- ::= { bosPortCtrlEntry 5 }
-- bosPortCtrlRenegotiate OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "When configured as 'true', restarts autonegotiation on the interface.
-- Once autonegotiation is restarted, the value of this object reverts
-- to 'false'."
-- DEFVAL { false }
-- ::= { bosPortCtrlEntry 6 }
--bosPortCtrlMaxMacAddr OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the maximum number of new MAC addresses that can be
-- learnt over the interface."
-- ::= { bosPortCtrlEntry 7 }
--bosPortCtrlMaxMacAction OBJECT-TYPE
-- SYNTAX INTEGER {
-- drop (1),
-- purgeLRU (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specifies the action to be taken when the maximum number of new MAC
-- addresses that can be learnt over the interface is exceeded.
-- If the action is 'drop', the packet with new mac address will be
-- dropped once the maximum number of new MAC addresses that can be
-- learnt over the interface is exceeded.
-- If the action is 'purgeLRU', the 'Least Recently Used' mac address
-- will be deleted from the MAC table and the new mac address will be
-- added."
-- ::= { bosPortCtrlEntry 8 }
--
--bosPortHOLBlockPrevention OBJECT-TYPE
-- SYNTAX INTEGER {
-- disabled (1),
-- enabled (2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enables or disables Head-Of-Line Blocking prevention on a port."
-- DEFVAL { enabled }
-- ::= { bosPortCtrlEntry 9 }
-- ----------------------------------------------------------------------------
-- } INSERT: bos
-- ----------------------------------------------------------------------------
bosext OBJECT IDENTIFIER ::= { bos 8 }
-- ----------------------------------------------------------------------------
-- { INSERT: bosExt
-- ----------------------------------------------------------------------------
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
bosRateControl OBJECT IDENTIFIER ::= { bosext 4 }
bosMacAcl OBJECT IDENTIFIER ::= { bosext 5 }
bosIpAcl OBJECT IDENTIFIER ::= { bosext 6 }
-- Rate Control Group --------------------------------------------- --
bosRateCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each interface in the switch."
::= { bosRateControl 1 }
bosRateCtrlEntry OBJECT-TYPE
SYNTAX BosRateCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical
interface in the switch."
INDEX { bosRateCtrlIndex }
::= { bosRateCtrlTable 1 }
BosRateCtrlEntry ::=
SEQUENCE {
bosRateCtrlIndex
Integer32,
bosRateCtrlDLFLimitValue
Integer32,
bosRateCtrlBCASTLimitValue
Integer32,
bosRateCtrlMCASTLimitValue
Integer32
}
bosRateCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { bosRateCtrlEntry 1 }
bosRateCtrlDLFLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of dlf packets that can be transmitted per second over this interface.
Setting this object to the value zero disables rate limiting for
Destination lookup failure packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { bosRateCtrlEntry 2 }
bosRateCtrlBCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of broadcast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Broadcast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { bosRateCtrlEntry 3 }
bosRateCtrlMCASTLimitValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of multicast packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for Multicast packets on this interface. The value that
can be set for this object is limited by the underlying hardware"
DEFVAL {0}
::= { bosRateCtrlEntry 4}
-- ------------------------------------------------------------------
-- Mac Acl Group --------------------------------------------------
bosMacAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMacAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure Mac Acl rules in the system."
::= { bosMacAcl 1 }
bosMacAclEntry OBJECT-TYPE
SYNTAX BosMacAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a Mac Acl rule.
Index to the table is the Mac Acl number."
INDEX { bosMacAclNo}
::= { bosMacAclTable 1 }
BosMacAclEntry ::=
SEQUENCE {
bosMacAclNo
Integer32,
bosMacAclProtocolType
Unsigned32,
bosMacAclDstMacAddr
MacAddress,
bosMacAclSrcMacAddr
MacAddress,
bosMacAclVlanId
Integer32,
bosMacAclInPortList
PortList,
bosMacAclOutPortList
PortList,
bosMacAclAction
INTEGER,
bosMacAclMatchCount
Counter32,
bosMacAclStatsStatus
TruthValue,
bosMacAclStats
Counter32,
bosMacAclClearStats
INTEGER,
bosMacAclUserPriority
INTEGER,
bosMacAclMirror
INTEGER,
bosMacAclMirrorPort
Integer32,
bosMacAclStatus
RowStatus
}
bosMacAclNo OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mac Acl rule number."
::= { bosMacAclEntry 1 }
bosMacAclProtocolType OBJECT-TYPE
SYNTAX Unsigned32 (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the non IP protocol type to be filtered.
aarp | amber | dec-spanning | decnet-iv |
diagnostic | dsm |etype-6000 | etype-8042 |
lat | lavc-sca | mop-console | mop-dump |
msdos | mumps | netbios | vines-echo |
vines-ip | xns-idp: A non-IP protocol.
A value of '0' means, the filter is applicable for all protocols."
DEFVAL { 0 }
::= { bosMacAclEntry 2 }
bosMacAclDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet."
::= { bosMacAclEntry 3 }
bosMacAclSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet."
::= { bosMacAclEntry 4 }
bosMacAclVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered.
A value of '0' means, no vlan is configured for filtering
allowed."
DEFVAL { 0 }
::= { bosMacAclEntry 5 }
bosMacAclInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
the filter rule will be applicable.
If the incoming port list is '0', the filter rule is applicable for all the
incoming ports.
By default inport list is maintained as '0'."
::= { bosMacAclEntry 6 }
bosMacAclOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is applicable only if the 'FilterAction' is 'allow'.
If the out going port list is non-zero, the packet will be sent over
the specifed ports only.
If the out going port list is '0', the port over which the packet is
to be switched will be based on further processing on the packet.
By default inport list is maintained as '0'."
::= { bosMacAclEntry 7 }
bosMacAclAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { bosMacAclEntry 8 }
bosMacAclMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { bosMacAclEntry 9 }
bosMacAclStatsStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If stats status is true then
the ACL's Hit Count is maintained."
::= { bosMacAclEntry 10 }
bosMacAclStats OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is hit."
::= { bosMacAclEntry 11 }
bosMacAclClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear ACL statistics"
::= { bosMacAclEntry 12 }
bosMacAclUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Used to set the user priority "
DEFVAL { -1 }
::= { bosMacAclEntry 13 }
bosMacAclMirror OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the ACL action to mirror in addition
to permit or deny. This attribute requires the ACL action to be
configured. This can be enabled only when object bosMacAclMirrorPort
is configured."
DEFVAL { disable }
::= { bosMacAclEntry 14 }
bosMacAclMirrorPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the port to which the packets matching
the ACLs will be mirrored. This attribute will be operational only
when bosMacAclMirror is enabled. Currently this supports only
system physical ports."
::= { bosMacAclEntry 15 }
bosMacAclStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
The entry status will be made 'active' only if
--> Either of ProtocolType/src mac address /dst mac address is
configured in case of MacAcl.
"
::= { bosMacAclEntry 16 }
-- ------------------------------------------------------------------
-- Ip Acl Group --------------------------------------------------
bosIpAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosIpAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure Ip Acl rules in the system.
"
::= { bosIpAcl 1 }
bosIpAclEntry OBJECT-TYPE
SYNTAX BosIpAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a Ip Acl rule.
Index to the table is Ip Acl number. "
INDEX { bosIpAclNo}
::= { bosIpAclTable 1 }
BosIpAclEntry ::=
SEQUENCE {
bosIpAclNo
Integer32,
bosIpAclProtocol
Integer32,
bosIpAclMessageType
Integer32,
bosIpAclMessageCode
Integer32,
bosIpAclDstIpAddr
IpAddress,
bosIpAclSrcIpAddr
IpAddress,
bosIpAclDstIpAddrMask
IpAddress,
bosIpAclSrcIpAddrMask
IpAddress,
bosIpAclMinDstProtPort
Unsigned32,
bosIpAclMaxDstProtPort
Unsigned32,
bosIpAclMinSrcProtPort
Unsigned32,
bosIpAclMaxSrcProtPort
Unsigned32,
bosIpAclInPortList
PortList,
bosIpAclOutPortList
PortList,
bosIpAclAckBit
INTEGER,
bosIpAclRstBit
INTEGER,
bosIpAclFinBit
INTEGER,
bosIpAclSynBit
INTEGER,
bosIpAclUrgBit
INTEGER,
bosIpAclPshBit
INTEGER,
bosIpAclTos
INTEGER,
bosIpAclDscp
Integer32,
bosIpAclAction
INTEGER,
bosIpAclMatchCount
Counter32,
bosIpAclStatsStatus
TruthValue,
bosIpAclStats
Counter32,
bosIpAclClearStats
INTEGER,
bosIpAclType
INTEGER,
bosIpAclMirror
INTEGER,
bosIpAclMirrorPort
Integer32,
bosIpAclStatus
RowStatus
}
bosIpAclNo OBJECT-TYPE
SYNTAX Integer32 (128..254)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ip Acl rule number."
::= { bosIpAclEntry 1 }
bosIpAclProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
DEFVAL { 65535 }
::= { bosIpAclEntry 2 }
bosIpAclMessageType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in bosIpAclAction.
The default value is 65535. It means that message type is not
configured and need not be checked.
Generally the value zero is given as default. But here
zero can be an ICMP Type value. Hence 65535 is given as the
default value.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
noICMPType(65535)
"
DEFVAL { 65535 }
::= { bosIpAclEntry 3 }
bosIpAclMessageCode OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in bosIpAclAction.
The default value is 65535. It means that message code is not
configured and need not be checked. Generally the value zero
will be given as default. But here, zero can be an ICMP Code
value. Hence 65535 is given as the default value.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
noICMPCode(65535)
"
DEFVAL { 65535 }
::= { bosIpAclEntry 4 }
bosIpAclDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
This object is valid only if the 'bosFilterType' is 'IpAcl'."
::= { bosIpAclEntry 5 }
bosIpAclSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
This object is valid only if the 'bosFilterType' is 'IpAcl'."
::= { bosIpAclEntry 6 }
bosIpAclDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This object is valid only if the 'bosFilterType' is 'IpAcl'."
DEFVAL { 'FFFFFFFF'h }
::= { bosIpAclEntry 7 }
bosIpAclSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This object is valid only if the 'bosFilterType' is 'IpAcl'."
DEFVAL { 'FFFFFFFF'h }
::= { bosIpAclEntry 8 }
bosIpAclMinDstProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the destination port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { bosIpAclEntry 9 }
bosIpAclMaxDstProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the destination port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 65535 }
::= { bosIpAclEntry 10 }
bosIpAclMinSrcProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum port in the source port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 0 }
::= { bosIpAclEntry 11 }
bosIpAclMaxSrcProtPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum port in the source port range. Please note
these ports are the TCP / UDP ports."
DEFVAL { 65535 }
::= { bosIpAclEntry 12 }
bosIpAclInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
the filter rule will be applicable.
If the incoming port list is '0', the filter rule is applicable for all the
incoming ports.
By default inport list is maintained as '0'."
::= { bosIpAclEntry 13 }
bosIpAclOutPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is applicable only if the 'FilterAction' is 'allow'.
If the out going port list is non-zero, the packet will be sent over
the specifed ports only.
If the out going port list is '0', the port over which the packet is
to be switched will be based on further processing on the packet.
By default inport list is maintained as '0'."
::= { bosIpAclEntry 14 }
bosIpAclAckBit OBJECT-TYPE
SYNTAX INTEGER {
establish(1),
notEstablish(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'any'(3). It means that ACK bit will not be checked
to decide the action. "
DEFVAL { any }
::= { bosIpAclEntry 15 }
bosIpAclRstBit OBJECT-TYPE
SYNTAX INTEGER {
set(1),
notSet(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'any'(3). It means that RST bit will not be checked to
decide the action. "
DEFVAL { any }
::= { bosIpAclEntry 16 }
bosIpAclFinBit OBJECT-TYPE
SYNTAX INTEGER {
set(1),
notSet(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP FIN bit to be checked against the packet. The default
value is 'any'(3). It means that FIN bit will not be checked
to decide the action. "
DEFVAL { any }
::= { bosIpAclEntry 17 }
bosIpAclSynBit OBJECT-TYPE
SYNTAX INTEGER {
set(1),
notSet(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP SYN bit to be checked against the packet. The default
value is 'any'(3). It means that SYN bit will not be checked
to decide the action. "
DEFVAL { any }
::= { bosIpAclEntry 18 }
bosIpAclUrgBit OBJECT-TYPE
SYNTAX INTEGER {
set(1),
notSet(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP URG bit to be checked against the packet. The default
value is 'any'(3). It means that URG bit will not be checked
to decide the action. "
DEFVAL { any }
::= { bosIpAclEntry 19 }
bosIpAclPshBit OBJECT-TYPE
SYNTAX INTEGER {
set(1),
notSet(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP PSH bit to be checked against the packet. The default
value is 'any'(3). It means that PSH bit will not be checked
to decide the action. "
DEFVAL { any }
::= { bosIpAclEntry 20 }
bosIpAclTos OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP TOS bit to be checked against the packet. This is a
single byte integer of which the last three bits (least
significant bits) indicate Delay, Throughput and Reliability
i.e 'uuuuudtr', u-unused, d-delay, t-throughput, r-reliability.
For example '6' indicates low delay and high throughput.
If this field is assigned a value of 8, Tos field will be ignored while
filtering. The default value for this field is 8."
DEFVAL { 8 }
::= { bosIpAclEntry 21 }
bosIpAclDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
If this field is assigned a value of -1, Dscp field will be ignored while
filtering. The default value for this field is -1"
DEFVAL { -1 }
::= { bosIpAclEntry 22 }
bosIpAclAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be sent to the
ports in 'out port list'. If the out port list is '0',
the port over which the packet is to be switched will be decided
based on further processing on the packet.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { bosIpAclEntry 23 }
bosIpAclMatchCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is matched."
::= { bosIpAclEntry 24 }
bosIpAclStatsStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If stats status is true then
the ACL's Hit Count is maintained."
::= { bosIpAclEntry 25 }
bosIpAclStats OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times this filter is hit."
::= { bosIpAclEntry 26 }
bosIpAclClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear ACL statistics"
::= { bosIpAclEntry 27 }
bosIpAclType OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
extended(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the category of IP filters.
Standard IP filter provides the basic IP filter option (IP
address/mask) whereas extended IP filter provides additional
options (Protocol, TCP/UDP Port numbers, TCP flags, TOS,
DSCP and ICMP types). This attribute needs to be set
before configuring the other atrributes of this table."
DEFVAL { standard }
::= { bosIpAclEntry 28 }
bosIpAclMirror OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the ACL action to mirror in addition
to permit or deny. This attribute requires the ACL action to be
configured. This can be enabled only when object bosIpAclMirrorPort
is configured."
DEFVAL { disable }
::= { bosIpAclEntry 29 }
bosIpAclMirrorPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the port to which the packets matching
the ACLs will be mirrored. This attribute will be operational only
when bosIpAclMirror is enabled. Currently this supports only
system physical ports."
::= { bosIpAclEntry 30 }
bosIpAclStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
The entry status will be made 'active' only if
--> Either of ProtocolType/src ip address/dst ip address is
configured in case of IpAcl."
::= { bosIpAclEntry 31 }
bosDhcpClientMIB OBJECT IDENTIFIER ::= { ex2500 87 }
-- ----------------------------------------------------------------------------
-- { INSERT: dhcpclient
-- ----------------------------------------------------------------------------
dhcpClientConfig OBJECT IDENTIFIER ::= { bosDhcpClientMIB 1 }
dhcpClientCounters OBJECT IDENTIFIER ::= { bosDhcpClientMIB 2 }
--- dhcpClientConfig
dhcpClientConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpClientConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains the Configuration information for
DHCP client on each interface. "
::= { dhcpClientConfig 1 }
dhcpClientConfigEntry OBJECT-TYPE
SYNTAX DhcpClientConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the dhcpClientConfigTable"
INDEX {dhcpClientConfigIfIndex}
::= { dhcpClientConfigTable 1 }
DhcpClientConfigEntry ::= SEQUENCE {
dhcpClientConfigIfIndex INTEGER,
dhcpClientRenew INTEGER,
dhcpClientRelease INTEGER
}
dhcpClientConfigIfIndex OBJECT-TYPE
SYNTAX
INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of one entry in dhcpClientConfigTable"
::= { dhcpClientConfigEntry 1 }
dhcpClientRenew OBJECT-TYPE
SYNTAX INTEGER
{
set (1),
notset (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for renewing the lease time currently available.
When this object is set,Client will send DHCP Renew Request
message provided client is in BOUND/RENEW/REBIND state.
The Object can be set to the value 'notset' only through
Protocol operation"
DEFVAL { 2 }
::= { dhcpClientConfigEntry 2 }
dhcpClientRelease OBJECT-TYPE
SYNTAX INTEGER
{
set(1),
notset (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to release the acquired IP back to the
DHCP server pool.When this object is set,Client will send
DHCP RELEASE message provided client is in BOUND/RENEW/
REBIND state.The Object can be set to the value 'notset'
only through Protocol operation"
DEFVAL { 2 }
::= { dhcpClientConfigEntry 5 }
--- dhcpClientCounters Group
dhcpClientCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpClientCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table contains the statistics of DHCP Client on each
interface. It will give the no of messages sent and received at
any time"
::= { dhcpClientCounters 1 }
dhcpClientCounterEntry OBJECT-TYPE
SYNTAX DhcpClientCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the dhcpClientCounterTable"
INDEX {dhcpClientIfIndex}
::= { dhcpClientCounterTable 1 }
--
DhcpClientCounterEntry ::= SEQUENCE {
dhcpClientIfIndex INTEGER,
dhcpClientCountDiscovers Counter32,
dhcpClientCountRequests Counter32,
dhcpClientCountReleases Counter32,
dhcpClientCountDeclines Counter32,
dhcpClientLeaseTime INTEGER,
dhcpClientCounterReset INTEGER,
dhcpClientRemainLeaseTime INTEGER
}
dhcpClientIfIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of one entry in dhcpClientCounterTable"
::= { dhcpClientCounterEntry 1 }
dhcpClientCountDiscovers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DHCPDISCOVER (option 53 with value 1) packets
sent."
::= { dhcpClientCounterEntry 2 }
dhcpClientCountRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DHCPREQUEST (option 53 with value 3) packets
sent."
::= { dhcpClientCounterEntry 3 }
dhcpClientCountReleases OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DHCPRELEASE (option 53 with value 7) packets
sent."
::= { dhcpClientCounterEntry 4 }
dhcpClientCountDeclines OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DHCPDECLINE (option 53 with value 4) packets sent."
::= { dhcpClientCounterEntry 5 }
dhcpClientLeaseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated Lease time of particular interface "
::= { dhcpClientCounterEntry 20 }
dhcpClientCounterReset OBJECT-TYPE
SYNTAX INTEGER
{
set (1),
notset (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It resets the Counter Stats for the particular interface "
::= { dhcpClientCounterEntry 21 }
dhcpClientRemainLeaseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It gets the remaining lease time of the particular interface "
::= { dhcpClientCounterEntry 22 }
-- ----------------------------------------------------------------------------
-- } INSERT: dhcpclient
-- ----------------------------------------------------------------------------
bosSyslog OBJECT IDENTIFIER ::= { ex2500 89 }
-- ----------------------------------------------------------------------------
-- { INSERT: syslog
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
bosSyslogGeneralGroup OBJECT IDENTIFIER ::= { bosSyslog 1 }
bosSyslogLogs OBJECT IDENTIFIER ::= { bosSyslog 2 }
-- ---------------------------------------------------------------- --
-- General Group
-- Common objects for syslogLogs and SMTP
bosSyslogLogging OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling syslog and email alert
features in the system."
DEFVAL { enable }
::= { bosSyslogGeneralGroup 1 }
bosSyslogTimeStamp OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling timestamp option.
When enabled, the messages (log and email alert messages) will
hold the time stamp information.
When disabled, the time stamp information will not be carried with
the messages sent to the log and mail servers."
DEFVAL { enable }
::= { bosSyslogGeneralGroup 2 }
bosSyslogConsoleLog OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the console log option.
When enabled, the messages (log and email alert messages) sent to
the server will be displayed in the console also.
When disabled,the messages will just be sent to the servers and not
be displayed in the console."
DEFVAL { enable }
::= { bosSyslogGeneralGroup 3 }
bosSyslogSysBuffers OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of log buffers to be allocated in the system"
DEFVAL { 50 }
::= { bosSyslogGeneralGroup 4 }
bosSyslogClearLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears the buffered logs.
This object is set to 'false' by default.
When set to 'True', the buffered logs will be cleared and the value
of this object will become 'false' again."
DEFVAL { false }
::= { bosSyslogGeneralGroup 5 }
bosSyslogFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(128), -- Reserved local use
local1(136), -- Reserved local use
local2(144), -- Reserved local use
local3(152), -- Reserved local use
local4(160), -- Reserved local use
local5(168), -- Reserved local use
local6(176), -- Reserved local use
local7(184) -- Reserved local use
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server."
DEFVAL { local0 }
::= { bosSyslogGeneralGroup 7 }
bosSyslogFacilitySec OBJECT-TYPE
SYNTAX INTEGER {
local0(128), -- Reserved local use
local1(136), -- Reserved local use
local2(144), -- Reserved local use
local3(152), -- Reserved local use
local4(160), -- Reserved local use
local5(168), -- Reserved local use
local6(176), -- Reserved local use
local7(184) -- Reserved local use
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Syslog standard facilities.
The facility to be used when sending Syslog messages to the secondary server."
DEFVAL { local0 }
::= { bosSyslogGeneralGroup 8 }
bosSyslogSeverity OBJECT-TYPE
SYNTAX INTEGER{
emergency(0), -- For logging messages that
-- are equivalent to panic
-- condition.
alert(1), -- For logging messages that
-- require immediate attention.
critical(2), -- For logging critical errors.
error(3), -- For logging error messages.
warning(4), -- For logging warning messages.
notice(5), -- For logging messages that
-- require attention
-- and not errors.
info(6), -- For logging informational
-- messages.
debug(7) -- For logging debug messages.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Syslog standard severities.
The severity to be used when sending Syslog messages to primary server."
::= { bosSyslogGeneralGroup 9 }
bosSyslogSeveritySec OBJECT-TYPE
SYNTAX INTEGER{
emergency(0), -- For logging messages that
-- are equivalent to panic
-- condition.
alert(1), -- For logging messages that
-- require immediate attention.
critical(2), -- For logging critical errors.
error(3), -- For logging error messages.
warning(4), -- For logging warning messages.
notice(5), -- For logging messages that
-- require attention
-- and not errors.
info(6), -- For logging informational
-- messages.
debug(7) -- For logging debug messages.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Syslog standard severities.
The severity to be used when sending Syslog messages to the secondary server."
::= { bosSyslogGeneralGroup 10 }
-- Syslog Logs group
-- Objects specific to Syslogs Logging.
bosSyslogLogSrvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the syslog server IP to be used for remote logging. When
configured, a new socket will be opened for this address.
When the address is changed, the socket opened for the previous address
will be closed and a new socket will be opened for this address."
::= { bosSyslogLogs 1 }
bosSyslogLogNoLogServer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Closes the socket connection opened for the log server address."
::= { bosSyslogLogs 2 }
bosSyslogLogSrvAddrSec OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the secondary syslog server IP to be used for remote logging
. When configured, a new socket will be opened for this address.
When the address is changed, the socket opened for the previous address
will be closed and a new socket will be opened for this address."
::= { bosSyslogLogs 3 }
bosSyslogLogNoLogServerSec OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Closes the socket connection opened for the secondary log server."
::= { bosSyslogLogs 4 }
-- ----------------------------------------------------------------------------
-- } INSERT: syslog
-- ----------------------------------------------------------------------------
bosssl OBJECT IDENTIFIER ::= { ex2500 96 }
-- ----------------------------------------------------------------------------
-- { INSERT: bosssl
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
sslGeneralGroup OBJECT IDENTIFIER ::= { bosssl 1 }
sslCiphers OBJECT IDENTIFIER ::= { bosssl 2 }
-- ---------------------------------------------------------------- --
-- General Group
-- This object has been renamed as issHttpStatus and moved to bosiss.mib
--sslHttpStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object is for enabling or disabling HTTP in the system."
--
-- DEFVAL { enable }
-- ::= { sslGeneralGroup 1 }
sslSecureHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling secure HTTP in the system."
DEFVAL { disable }
::= { sslGeneralGroup 2 }
sslPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the SSL port."
DEFVAL { 443 }
::= { sslGeneralGroup 3 }
sslTrace OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the trace level for SSL.
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Note:BIT 0 - Least significant bit
BIT 7 - Most significant bit
For example,setting the trace level to the value -0001 0101,
will enable Init-Shutdown, data path and packet dump trace levels.
Setting all the bits will enable all the trace levels and
resetting them will disable all the trace levels."
::= { sslGeneralGroup 4 }
sslTftpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server IP address or domain name."
::= { sslGeneralGroup 5 }
sslHttpCertName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The https certificate file name to be downloaded."
::= { sslGeneralGroup 6 }
sslHttpImportCertAction OBJECT-TYPE
SYNTAX INTEGER {
crtget(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to perform various TFTP Get or Put functions.
The TFTP sever is specified in sslTftpServer object. Presently we have support
for get function.
crtget(1) - Downloads the Certificate
other(2) is returned always when read."
::= { sslGeneralGroup 7 }
sslHttpInitiateCertTransfer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to perform the trasfer of the ssl http
certificate."
::= { sslGeneralGroup 8 }
sslTftpLastActionStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This recorded status of the previous TFTP activity."
::= { sslGeneralGroup 9 }
-- Ciphers group
sslCipherList OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the cipher-suites list.
This field is a bit mask, setting a bit indicates that the
corresponding cipher-list will be involved in the server
authentication.
BIT 0 - RSA-NULL-MD5
BIT 1 - RSA-NULL-SHA
BIT 2 - RSA-DES-SHA
BIT 3 - RSA-3DES-SHA
BIT 4 - DH-RSA-DES-SHA
BIT 5 - DH-RSA-3DES-SHA
BIT 6 - RSA-EXP1024-DES-SHA
Note:BIT 0 - Least significant bit
BIT 6 - Most significant bit
For example,setting the cipher list to the value - 001 0101,
will include RSA-NULL-MD5, RSA-DES-SHAa and DH-RSA-DES-SHA as
cipher-list for authentication."
DEFVAL { 0 }
::= { sslCiphers 1}
sslDefaultCipherList OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to set the default cipher-suites list in 'sslCipherList'.
Setting DefaultCipherList to TRUE would set the following cipher-list for
authentication:
- RSA_3DES_SHA1
- RSA_DES_SHA1
- RSA_EXP1024_DES_SHA1
The value of this object reverts back to FALSE once the default cipher list is set."
DEFVAL { false }
::= { sslCiphers 2}
-- ----------------------------------------------------------------------------
-- } INSERT: bosssl
-- ----------------------------------------------------------------------------
bosssh OBJECT IDENTIFIER ::= { ex2500 97 }
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
sshGeneralGroup OBJECT IDENTIFIER ::= { bosssh 1 }
-- ---------------------------------------------------------------- --
-- General Group
sshVersionCompatibility OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the SSH version compatibility mode.
When set to TRUE, both SSH version-1 and SSH Version-2 will be supported.
When set to FALSE, SSH version-2 only will be supported.
By default SSH version-2 is supported."
DEFVAL { false }
::= { sshGeneralGroup 1 }
sshCipherList OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the cipher-suites list.
This object takes values as bit mask. Setting a bit indicates that the
corresponding cipher-list will be used for Encryption.
The value of each bit position is as given below with bit 0 being the
least significant bit:
BIT 1 - DES-CBC
BIT 0 - 3DES-CBC"
DEFVAL { 1 }
::= { sshGeneralGroup 2}
sshMacList OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the MAC-list.
This object takes values as bit mask. Setting a bit indicates that the
corresponding MAC-list will be used for authentication.
The value of each bit position is as given below with bit 0 being the
least significant bit:
BIT 1 - HMAC-MD5
BIT 0 - HMAC-SHA1"
DEFVAL { 1 }
::= { sshGeneralGroup 3}
sshPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be used by the hosts to do the SSH operation.
The ssh server must be disabled first and then enabled to
effect the port change."
DEFVAL { 22 }
::= { bosssh 2 }
sshStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the SSH access to the system."
DEFVAL { enable }
::= { bosssh 3 }
sshGenerateHostKey OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ssh Host key generation control.
Setting this object to TRUE results in the generation of a new host key.
This object always returns FALSE when it is read"
::= { bosssh 4 }
sshGenerateServerKey OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ssh Server key generation control.
Setting this object to TRUE results in the generation of a new ssh
server key. This object always returns FALSE when it is read"
::= { bosssh 5 }
sshServerInterval OBJECT-TYPE
SYNTAX Integer32 (0..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The auto regenearation time interval for the ssh server key in hours.
Value of 0 indicates that no re-generation of server key is required."
::= { bosssh 6 }
-- ----------------------------------------------------------------------------
-- } INSERT: ssh
-- ----------------------------------------------------------------------------
ex2500addon OBJECT IDENTIFIER ::= { ex2500 102}
-- ----------------------------------------------------------------------------
-- { INSERT: g8124
-- ----------------------------------------------------------------------------
-- Module Group
-- Module Ids should consistent with Piggy and should be maintained as defined
cfa OBJECT IDENTIFIER ::= { ex2500addon 2 }
igs OBJECT IDENTIFIER ::= { ex2500addon 5 }
pnac OBJECT IDENTIFIER ::= { ex2500addon 6 }
sys OBJECT IDENTIFIER ::= { ex2500addon 7 }
pmirr OBJECT IDENTIFIER ::= { ex2500addon 8 }
stp OBJECT IDENTIFIER ::= { ex2500addon 9 }
ip OBJECT IDENTIFIER ::= { ex2500addon 10 }
snmpv3 OBJECT IDENTIFIER ::= { ex2500addon 11 }
qos OBJECT IDENTIFIER ::= { ex2500addon 12 }
fdb OBJECT IDENTIFIER ::= { ex2500addon 13 }
switch OBJECT IDENTIFIER ::= { ex2500addon 14 }
snmp OBJECT IDENTIFIER ::= { ex2500addon 15 }
bosSnmpTraps OBJECT IDENTIFIER ::= { ex2500addon 17 }
bosbhm OBJECT IDENTIFIER ::= { ex2500addon 18 }
bosAccessUser OBJECT IDENTIFIER ::= { ex2500addon 19 }
mgmtintf OBJECT IDENTIFIER ::= { ex2500addon 20 }
-- Blade Harmony 'TrapDisplayString' object
bntSwTrapDisplayString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary string object used to store information about trap being sent
in an BNT Switch traps."
::= { ex2500addon 1000 }
-- bhm Wrapper Objects (bosbhm)
dataCollection OBJECT IDENTIFIER ::= { bosbhm 1 }
generalConfiguration OBJECT IDENTIFIER ::= { bosbhm 2 }
imageConfigTransfer OBJECT IDENTIFIER ::= { bosbhm 3 }
portInformation OBJECT IDENTIFIER ::= { bosbhm 4 }
vlanConfiguration OBJECT IDENTIFIER ::= { bosbhm 5 }
-- VLAN Objects
bosCfgVlanNewVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Id of new Vlan that needs to be created. Get will always
return 1."
::= { vlanConfiguration 1 }
vlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlanConfiguration 2 }
vlanNewCfgTableEntry OBJECT-TYPE
SYNTAX VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanNewCfgVlanId }
::= { vlanNewCfgTable 1 }
VlanNewCfgTableEntry ::= SEQUENCE {
vlanNewCfgVlanId Integer32,
vlanNewCfgVlanName DisplayString,
vlanNewCfgPorts OCTET STRING,
vlanNewCfgPortList DisplayString,
vlanNewCfgState INTEGER,
vlanNewCfgAddPort Integer32,
vlanNewCfgRemovePort Integer32,
vlanNewCfgStg Integer32,
vlanNewCfgPrVlanType INTEGER,
vlanNewCfgPrVlanMapPriId Integer32,
vlanNewCfgPrVlanState INTEGER,
vlanNewCfgDelete INTEGER
}
vlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanNewCfgTableEntry 1 }
vlanNewCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanNewCfgTableEntry 2 }
vlanNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanNewCfgTableEntry 3 }
vlanNewCfgPortList OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in a string format,
delimited by ',' or an interval of ports delimited by '-'"
::= { vlanNewCfgTableEntry 4 }
vlanNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanNewCfgTableEntry 5 }
vlanNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to the specified VLAN. A '0' value is
returned when read."
::= { vlanNewCfgTableEntry 6 }
vlanNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from the specified VLAN. A '0'
value is returned when read."
::= { vlanNewCfgTableEntry 7 }
vlanNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN"
::= { vlanNewCfgTableEntry 8 }
vlanNewCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanNewCfgTableEntry 9 }
vlanNewCfgPrVlanType OBJECT-TYPE
SYNTAX INTEGER{
none(0),
primary(1),
isolated(2),
community(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the Private VLAN."
::= { vlanNewCfgTableEntry 10 }
vlanNewCfgPrVlanMapPriId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary vlan id"
::= { vlanNewCfgTableEntry 11 }
vlanNewCfgPrVlanState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable a Private VLAN."
::= { vlanNewCfgTableEntry 12 }
fdbClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear-master(2),
clear-static(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear-master(2) clears the entire master FDB,
Setting this value to clear-static(3) clears the entire static FDB."
::= { fdb 1 }
fdbStatsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the Forwarding Database."
::= { fdb 2 }
fdbStatsHiwat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Highest number of entries recorded at any given time in the
Forwarding Database."
::= { fdb 3 }
fdbStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear FDB statistics"
::= { fdb 4 }
fdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { fdb 5 }
fdbEntry OBJECT-TYPE
SYNTAX FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { fdbVlan, fdbMacAddr }
::= { fdbTable 1 }
FdbEntry ::= SEQUENCE {
fdbVlan Integer32,
fdbMacAddr PhysAddress,
fdbMacAddrStr DisplayString,
fdbVlanId Integer32,
fdbSrcPort Integer32,
fdbSrcTrunk Integer32,
fdbState INTEGER,
fdbRefSps DisplayString,
fdbLearnedPort Integer32,
fdbStatus Integer32,
fdbClearMac INTEGER
}
fdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { fdbEntry 1 }
fdbMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { fdbEntry 2 }
fdbMacAddrStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address in hex format for the FDB entry.This node is added for
display purpose."
::={ fdbEntry 3 }
fdbVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry. This node is added for display purpose."
::= { fdbEntry 4 }
fdbSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { fdbEntry 5 }
fdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { fdbEntry 6 }
fdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
forward(2),
trunk(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group"
::= { fdbEntry 7 }
fdbRefSps OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The referenced SPs associated with this FDB entry."
::= { fdbEntry 8 }
fdbLearnedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The learned port associated with this FDB entry."
::= { fdbEntry 9 }
fdbStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'1' if it is permanent
'0' if it is not permanent"
::= { fdbEntry 10 }
fdbClearMac OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the corresponding table entry in FDB."
::= { fdbEntry 11 }
fdbDisableAging OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true aging of fdb table entries is disabled.
'1' Fdb aging is disabled
'0' Fdb aging is enabled"
::= { fdb 6 }
fdbNewCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 7 }
fdbNewCfgStaticEntry OBJECT-TYPE
SYNTAX FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbNewCfgEntryIndex}
::= { fdbNewCfgStaticTable 1 }
FdbNewCfgStaticEntry ::= SEQUENCE {
fdbNewCfgEntryIndex Integer32,
fdbNewCfgAddVlan Integer32,
fdbNewCfgAddPort Integer32,
fdbNewCfgAddPortChannel Integer32,
fdbNewCfgAddMac DisplayString
}
fdbNewCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbNewCfgStaticEntry 1 }
fdbNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add vlan for fdb entry "
::= { fdbNewCfgStaticEntry 2 }
fdbNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbNewCfgStaticEntry 3 }
fdbNewCfgAddPortChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address port Channel number."
::= { fdbNewCfgStaticEntry 4 }
fdbNewCfgAddMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a fdb MAC address entry."
::= { fdbNewCfgStaticEntry 5}
fdbAgingTime OBJECT-TYPE
SYNTAX Integer32 (10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aging time for dynamic mac address entries"
::= { fdb 8 }
-- Interface mangager(CFA) objects
bosPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the new_configuration block."
::= { cfa 1 }
bosPortCfgTableEntry OBJECT-TYPE
SYNTAX BosPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port configuration table in the new_configuration block."
INDEX {bosPortCfgIndx }
::= {bosPortCfgTable 1 }
BosPortCfgTableEntry ::= SEQUENCE {
bosPortCfgIndx Integer32,
bosPortCfgVlanTag Integer32,
bosPortCfgStateChangeCount Counter32,
bosPortCfgLearning INTEGER,
bosPortCfgFlooding INTEGER,
bosPortCfgTagPvid INTEGER,
bosPortCfgMacNotif INTEGER
}
bosPortCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { bosPortCfgTableEntry 1 }
bosPortCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN tag configured for the port"
::= { bosPortCfgTableEntry 2 }
bosPortCfgStateChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"No of Link State changes for the interface"
::= { bosPortCfgTableEntry 3 }
bosPortCfgLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables MAC address learning on the port."
::= { bosPortCfgTableEntry 4 }
bosPortCfgFlooding OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables flooding on the port."
::= { bosPortCfgTableEntry 5 }
bosPortCfgTagPvid OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disables or Enables VLAN tag persistence. When disabled, the VLAN tag
is removed from packets whose VLAN tag matches the port PVID even if
the port is a tagged member of that VLAN"
::= { bosPortCfgTableEntry 6 }
bosPortCfgMacNotif OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables MAC address mac notification syslog messages on the port."
::= { bosPortCfgTableEntry 7 }
bosPortStatsClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPortStatsClearTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to clear port statistics."
::= { cfa 2 }
bosPortStatsClearTableEntry OBJECT-TYPE
SYNTAX BosPortStatsClearTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port stats clear table."
INDEX { bosPortStatsIndx }
::= { bosPortStatsClearTable 1 }
BosPortStatsClearTableEntry ::=
SEQUENCE {
bosPortStatsIndx InterfaceIndex,
bosPortStatsClear INTEGER
}
bosPortStatsIndx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index by which the row
in this table is identified."
::= { bosPortStatsClearTableEntry 1 }
bosPortStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for this port."
::= { bosPortStatsClearTableEntry 2 }
bosClearPortsStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the statistics for all ports."
::= { cfa 3 }
bosPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosPortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to get port statistics."
::= { cfa 4 }
bosPortStatsTableEntry OBJECT-TYPE
SYNTAX BosPortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port stats clear table."
INDEX { bosPortIndex }
::= { bosPortStatsTable 1 }
BosPortStatsTableEntry ::=
SEQUENCE {
bosPortIndex InterfaceIndex,
bosPortUndersizePkts Counter32
}
bosPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index by which the row
in this table is identified."
::= { bosPortStatsTableEntry 1 }
bosPortUndersizePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of undersized frames (<64 bytes) received on the
particular interface specified by bosPortIndex."
::= { bosPortStatsTableEntry 2 }
-- PNAC OBJECTS BEGIN
dot1x OBJECT IDENTIFIER ::= { pnac 1 }
dot1xNewCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 2 }
dot1xNewStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dot1x status "
::= { dot1x 1 }
dot1xNewCfgGlobalMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Authentication Mode "
::= { dot1xNewCfgGlobalTable 3 }
dot1xNewCfgGlobalQtPeriod OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Quiet Period (0..65535) "
::= { dot1xNewCfgGlobalTable 4 }
dot1xNewCfgGlobalTxPeriod OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Tx Period (1..65535) "
::= { dot1xNewCfgGlobalTable 5 }
dot1xNewCfgGlobalSupTmout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Supplicand timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 6 }
dot1xNewCfgGlobalSrvTmout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 7 }
dot1xNewCfgGlobalMaxRq OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xNewCfgGlobalTable 8 }
dot1xNewCfgGlobalRaPeriod OBJECT-TYPE
SYNTAX Integer32 (1..604800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Reauthentication period (1..604800) "
::= { dot1xNewCfgGlobalTable 9 }
dot1xNewCfgGlobalReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Reauthentication status "
::= { dot1xNewCfgGlobalTable 10 }
dot1xNewCfgGlobalDefault OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Restore default 802.1x configuration "
::= { dot1xNewCfgGlobalTable 11 }
dot1xClearStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xClearStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Clear the dot1x authenticator statistics "
::= { dot1x 3 }
dot1xClearStatsEntry OBJECT-TYPE
SYNTAX Dot1xClearStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Clear Authenticator PAE statistics "
INDEX { dot1xPortNumber }
::= { dot1xClearStatsTable 1 }
Dot1xClearStatsEntry ::=
SEQUENCE {
dot1xPortNumber
Integer32 ,
dot1xClearStats
INTEGER
}
dot1xPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for the dot1xClearStatsTable "
::= { dot1xClearStatsEntry 1 }
dot1xClearStats OBJECT-TYPE
SYNTAX INTEGER {
other(0),
clear(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to clear the dot1x Authenticator Statistics Entry for the
given port are cleared. Always returns other on get. "
::= { dot1xClearStatsEntry 2 }
-- PNAC OBJECTS STOP
-- SYSTEM FEATURE OBJECTS BEGIN
agNewCfgIdleCLITimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set idle CLI sessions timeout."
::= { sys 1 }
agImageForNextReset OBJECT-TYPE
SYNTAX INTEGER{
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2"
::= { sys 2 }
-- TACACS+ Cli command Authorization/Accounting status Table
tacacsCmdAuthorAcctStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TacacsCmdAuthorAcctStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains Status of Cli command Authorization and Accounting
using TACACS+ AAA protocol.Status can be enabled or disabled for
specific privilege level commands."
::= { sys 3 }
tacacsCmdAuthorAcctStatusEntry OBJECT-TYPE
SYNTAX TacacsCmdAuthorAcctStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TACACS+ Cli command Authorization and Accounting Status."
INDEX { tacacsCmdPrivLevel }
::= { tacacsCmdAuthorAcctStatusTable 1 }
TacacsCmdAuthorAcctStatusEntry ::= SEQUENCE {
tacacsCmdPrivLevel Integer32,
tacacsCmdAuthorstatus TruthValue,
tacacsCmdAcctStatus TruthValue
}
tacacsCmdPrivLevel OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Privilege level associated with the CLI command."
::= { tacacsCmdAuthorAcctStatusEntry 1 }
tacacsCmdAuthorstatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If command authorization status is true then
all commands with specified privilege level
will be sent to tacacs server for authorization."
::= { tacacsCmdAuthorAcctStatusEntry 2 }
tacacsCmdAcctStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If command accounting status is ture
then all commands with specified privilege level
will be sent to tacacs server for accounting."
::= { tacacsCmdAuthorAcctStatusEntry 3 }
systemNotice1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allow user to save a text string that would be displayed
BEFORE the password prompt is presented"
::={ sys 6}
systemNotice2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allow user to save a text string that would be displayed
BEFORE the password prompt is presented"
::={ sys 7}
systemNotice3 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allow user to save a text string that would be displayed
BEFORE the password prompt is presented"
::={ sys 8}
systemNotice4 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allow user to save a text string that would be displayed
BEFORE the password prompt is presented"
::={ sys 9}
systemNotice5 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allow user to save a text string that would be displayed
BEFORE the password prompt is presented"
::={ sys 10}
systemBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object stores the display banner"
::={ sys 11}
sysAccessUserBbi OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling the Access UserBbi"
DEFVAL { enable }
::= { sys 12 }
sysCurCfgHprompt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current status of hprompt."
::= { sys 13 }
bosSyslogTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSyslogTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of Syslog configuration."
::= { sys 14 }
bosSyslogTableEntry OBJECT-TYPE
SYNTAX BosSyslogTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a particular module's Syslog configuration."
INDEX { bosSyslogModuleIndex }
::= { bosSyslogTable 1 }
BosSyslogTableEntry ::= SEQUENCE {
bosSyslogModuleIndex Integer32,
bosSyslogStatus INTEGER
}
bosSyslogModuleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier of a particular Syslog module.
Module id assigned to various modules are defined below
SYSLOG_ID (1),
STG_ID(2),
HOTLINKS_ID(3),
PORTCHANNEL_ID(4),
VLAN_ID(5),
PRIVLAN_ID(6),
SNOOP_ID(7),
WEB_ID(8),
CLI_ID(9),
UFD_ID(10)
NTP_ID(11),
SYSTEM_ID(12),
TELNET_ID(13),
RMON_ID(14),
NOTICE_ID(15),
IP_ID(16),
CSR_ID(17),
TFTP_ID(18)."
::= { bosSyslogTableEntry 1 }
bosSyslogStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables or disables syslog messages "
::= { bosSyslogTableEntry 2 }
-- SYSTEM FEATURE OBJECTS STOP
-- PORT MIRRORING OBJECTS BEGIN
pmNewCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { pmirr 1 }
pmNewCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { pmirr 2 }
pmNewCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
::= { pmNewCfgPortMonitorTable 1 }
PmNewCfgPortMonitorEntry ::= SEQUENCE {
pmNewCfgPmirrMoniPortIndex Integer32,
pmNewCfgPmirrMirrPortIndex Integer32,
pmNewCfgPmirrDirection INTEGER,
pmNewCfgPmirrDelete INTEGER
}
pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmNewCfgPortMonitorEntry 1 }
pmNewCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmNewCfgPortMonitorEntry 2 }
pmNewCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmNewCfgPortMonitorEntry 3 }
pmNewCfgPmirrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 4 }
-- PORT MIRRORING OBJECTS STOP
-- Spanning tree Objects
-- STP OBJECTS START
bosMstMstiInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMstMstiInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Spanning tree instance information"
::= { stp 1 }
bosMstMstiInstanceEntry OBJECT-TYPE
SYNTAX BosMstMstiInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing the Spanning Tree Instance information"
INDEX { bosMstMstiInstanceIndex }
::= { bosMstMstiInstanceTable 1 }
BosMstMstiInstanceEntry ::=
SEQUENCE {
bosMstMstiInstanceIndex
Integer32,
bosMstMstiForceState
INTEGER,
bosMstMstiForcePortStateBmp
OCTET STRING
}
bosMstMstiInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs."
::= { bosMstMstiInstanceEntry 1 }
bosMstMstiForceState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Diables spanning tree on the all the ports under that
instance"
::= {bosMstMstiInstanceEntry 2 }
bosMstMstiForcePortStateBmp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enables/Diables spanning tree on the all the ports under that
instance"
::= {bosMstMstiInstanceEntry 3 }
bosStgCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosStgCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Groups configuration."
::= { stp 2 }
bosStgCfgTableEntry OBJECT-TYPE
SYNTAX BosStgCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { bosStgCfgIndex }
::= { bosStgCfgTable 1 }
BosStgCfgTableEntry ::= SEQUENCE {
bosStgCfgIndex Integer32,
bosStgCfgDefaultCfg INTEGER
}
bosStgCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group.
value 0 signifies MSTP CIST"
::= { bosStgCfgTableEntry 1 }
bosStgCfgDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
defaultConfig(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default-config(1) will reset Spanning-tree bridge and
port parameters to their default values.The object always returns
default-config (1)."
::= { bosStgCfgTableEntry 2 }
bosMstCistDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything."
::= { stp 3 }
bosStpMode OBJECT-TYPE
SYNTAX INTEGER {
rstp(1),
mstp(2),
pvrst(3),
disable(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute is used to set the spanning tree mode.
The default value of this is attribute is rstp"
::= { stp 4 }
bosRstPortExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosRstPortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table that is an extension to the dot1dStpExtPortTable.
This contains object(s) that are Port-based."
::= { stp 5 }
bosRstPortExtEntry OBJECT-TYPE
SYNTAX BosRstPortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is for each port present in the system.
This table is indexed by the bosRstPort."
INDEX { bosRstPort }
::= { bosRstPortExtTable 1 }
BosRstPortExtEntry ::=
SEQUENCE {
bosRstPort
Integer32,
bosRstPortRole
INTEGER,
bosRstPortOperVersion
INTEGER,
bosRstPortRoleTransSmState
INTEGER,
bosRstPortStateTransSmState
INTEGER,
bosRstPortRxRstBpduCount
Counter32,
bosRstPortRxConfigBpduCount
Counter32,
bosRstPortRxTcnBpduCount
Counter32,
bosRstPortTxRstBpduCount
Counter32,
bosRstPortTxConfigBpduCount
Counter32,
bosRstPortTxTcnBpduCount
Counter32,
bosRstPortInvalidRstBpduRxCount
Counter32,
bosRstPortInvalidConfigBpduRxCount
Counter32,
bosRstPortInvalidTcnBpduRxCount
Counter32,
bosRstPortProtocolMigrationCount
Counter32,
bosRstPortBpduGuard
TruthValue
}
bosRstPort OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, indicating the Port number."
::= { bosRstPortExtEntry 1 }
bosRstPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabledPort(0),
alternatePort(1),
backupPort(2),
rootPort(3),
designatedPort(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the current Port Role assumed by this Port."
::= { bosRstPortExtEntry 2 }
bosRstPortOperVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates whether the Port is operationally in the Rstp
mode or the Stp-compatible mode i.e., whether the Port is
transmitting RST BPDUs or Config/TCN BPDUs."
::= { bosRstPortExtEntry 3 }
bosRstPortRoleTransSmState OBJECT-TYPE
SYNTAX INTEGER {
init (0),
disableport (1),
disabledport (2),
rootport (3),
designatedport (4),
backupport (5),
rootproposed (6),
rootagreed(7),
reroot (8),
rootforward (9),
rootlearn (10),
rerooted (11),
designatedpropose (12),
designatedsynced (13),
designatedretired (14),
designatedforward (15),
designatedlearn (16),
designatedlisten (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the current state of the Port Role Transition state machine.
This object will hold the value 'init' when the Port Role Transition state
machine is in the INIT state, the value 'disableport' when the state machine
is in the DISABLE_PORT state, the value 'disabledport' when the state machine
is in the DISABLED_PORT state, the value 'rootport' when the state machine
is in the ROOT_PORT state, the value 'desgport' when the state machine is in
the DESIGNATED_PORT state, the value 'backupport' when the state machine is in
BACKUP_PORT state, the value 'rootproposed' when the state machine is in the
ROOT_PROPOSED state, the value 'rootagreed' when the state machine is in the
ROOT_AGREED state, the value 'reroot' when the state machine is in the REROOT
state, the value 'rootforward' when the state machine is in the ROOT_FORWARD
state, the value 'rootlearn' when the state machine is in the ROOT_LEARN
state, the value 'rerooted' when the state machine is in the REROOTED state,
the value 'designatedpropose' when the state machine is in the
DESIGNATED_PROPOSE state, the value 'designatedsynced' when the state machine
is in the DESIGNATED_SYNCED state, the value 'designatedretired' when the
state machine is in the DESIGNATED_RETIRED state, the value 'designatedforward'
when the state machine is in the DESIGNATED_FORWARD state, the value
'designatedlearn' when the state machine is in the DESIGNATED_LEARN state and
the value 'designatedlisten' when the state machine is in the DESIGNATED_LISTEN
state."
::= { bosRstPortExtEntry 4 }
bosRstPortStateTransSmState OBJECT-TYPE
SYNTAX INTEGER {
discarding (0),
learning (1),
forwarding (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the current state of the Port State Transition state machine.
This object will hold the value 'discarding' when the Port State Transition
state machine is in the DISCARDING state, the value 'learning' when the state
machine is in the LEARNING state and the value 'forwarding' when the state
machine is in the FORWARDING state."
::= { bosRstPortExtEntry 5 }
bosRstPortRxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RST BPDUs that have been received on this Port."
::= { bosRstPortExtEntry 6 }
bosRstPortRxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Config BPDUs that have been received on this Port."
::= { bosRstPortExtEntry 7 }
bosRstPortRxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TCN BPDUs that have been received on this Port."
::= { bosRstPortExtEntry 8 }
bosRstPortTxRstBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RST BPDUs that have been transmitted by this Port."
::= { bosRstPortExtEntry 9 }
bosRstPortTxConfigBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Config BPDUs that have been transmitted by this Port."
::= { bosRstPortExtEntry 10 }
bosRstPortTxTcnBpduCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TCN BPDUs that have been transmitted by this Port."
::= { bosRstPortExtEntry 11 }
bosRstPortInvalidRstBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid RSTP BPDUs that have been received on this Port.
A Trap is generated on the occurrence of this event."
::= { bosRstPortExtEntry 12 }
bosRstPortInvalidConfigBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid Configuration BPDUs that have been received on
this Port. A Trap is generated on the occurrence of this event."
::= { bosRstPortExtEntry 13 }
bosRstPortInvalidTcnBpduRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid TCN BPDUs that have been received on this Port.
A Trap is generated on the occurrence of this event."
::= { bosRstPortExtEntry 14 }
bosRstPortProtocolMigrationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and RSTP.
A Trap is generated on the occurrence of this event."
::= { bosRstPortExtEntry 15 }
bosRstPortBpduGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This parameter when TRUE(1) indicates that BpduGuard of a port
enabled and FALSE(2) indicates that this feature is disabled."
::= { bosRstPortExtEntry 16 }
-- -----------------------------------------------------------------
-- Bos Mst Common Spanning Tree Port Table
-- -----------------------------------------------------------------
bosMstCistPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { stp 6 }
bosMstCistPortEntry OBJECT-TYPE
SYNTAX BosMstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { bosMstCistPort }
::= { bosMstCistPortTable 1 }
BosMstCistPortEntry ::=
SEQUENCE {
bosMstCistPort
Integer32,
bosMstCistPortPathCost
Integer32,
bosMstCistPortPriority
Integer32,
bosMstCistPortDesignatedRoot
BridgeId,
bosMstCistPortDesignatedBridge
BridgeId,
bosMstCistPortDesignatedPort
OCTET STRING,
bosMstCistPortAdminP2P
INTEGER,
bosMstCistPortOperP2P
TruthValue,
bosMstCistPortAdminEdgeStatus
TruthValue,
bosMstCistPortProtocolMigration
TruthValue,
bosMstCistPortState
INTEGER,
bosMstCistForcePortState
INTEGER,
bosMstCistPortDesignatedCost
Integer32,
bosMstCistPortRegionalRoot
BridgeId,
bosMstCistPortRegionalPathCost
Integer32,
bosMstCistCurrentPortRole
INTEGER,
bosMstCistPortHelloTime
Timeout,
bosMstCistPortAutoEdgeStatus
TruthValue,
bosMstCistPortPvstProtectionStatus
TruthValue,
bosMstCistPortBpduGuard
TruthValue
}
bosMstCistPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { bosMstCistPortEntry 1 }
bosMstCistPortPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the CIST Root which include this port."
::= { bosMstCistPortEntry 2 }
bosMstCistPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { bosMstCistPortEntry 3 }
bosMstCistPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted."
::= { bosMstCistPortEntry 4 }
bosMstCistPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { bosMstCistPortEntry 5 }
bosMstCistPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { bosMstCistPortEntry 6 }
bosMstCistPortAdminP2P OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { bosMstCistPortEntry 7 }
bosMstCistPortOperP2P OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the bosMstCistPortAdminP2P object."
::= { bosMstCistPortEntry 8 }
bosMstCistPortAdminEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
::= { bosMstCistPortEntry 9 }
bosMstCistPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Protocol migration state of this Port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs without instance information.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
::= { bosMstCistPortEntry 11 }
bosMstCistPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { bosMstCistPortEntry 12 }
bosMstCistForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts"
::= { bosMstCistPortEntry 13 }
bosMstCistPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port."
::= { bosMstCistPortEntry 14 }
bosMstCistPortRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
CIST Regional Root Identifier in the configuration BPDUs
transmitted."
::= { bosMstCistPortEntry 15 }
bosMstCistPortRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths
towards the CIST Regional Root which include this port."
::= { bosMstCistPortEntry 16 }
bosMstCistCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { bosMstCistPortEntry 17 }
bosMstCistPortHelloTime OBJECT-TYPE
SYNTAX Timeout (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on this port
in units of a second."
::= { bosMstCistPortEntry 18 }
bosMstCistPortAutoEdgeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter when TRUE(1) indicates that detection
of a port as Edge Port happens automatically
and FALSE(2) indicates that this feature is disabled."
::= { bosMstCistPortEntry 19 }
bosMstCistPortPvstProtectionStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter when TRUE(1) indicates that PVST Protection
of a port is ON
and FALSE(2) indicates that this feature is disabled."
::= { bosMstCistPortEntry 20 }
bosMstCistPortBpduGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter when TRUE(1) indicates that BpduGuard of a port
is enabled
and FALSE(2) indicates that this feature is disabled."
::= { bosMstCistPortEntry 21 }
-- STP OBJECTS STOP
--snmpv3 OBJECTS START
-- The usmUser Group
-- Textual Conventions ***********************************************
BosKeyChange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Every definition of an object with this syntax must identify
a protocol P, a secret key K, and a hash algorithm H
that produces output of L octets.
The object's value is a manager-generated, partially-random
value which, when modified, causes the value of the secret
key K, to be modified via a one-way function.
The value of an instance of this object is the concatenation
of two components: first a 'random' component and then a
'delta' component.
The lengths of the random and delta components
are given by the corresponding value of the protocol P;
if P requires K to be a fixed length, the length of both the
random and delta components is that fixed length; if P
allows the length of K to be variable up to a particular
maximum length, the length of the random component is that
maximum length and the length of the delta component is any
length less than or equal to that maximum length.
For example, usmHMACMD5AuthProtocol requires K to be a fixed
length of 16 octets and L - of 16 octets.
usmHMACSHAAuthProtocol requires K to be a fixed length of
20 octets and L - of 20 octets. Other protocols may define
other sizes, as deemed appropriate.
When a requester wants to change the old key K to a new
key keyNew on a remote entity, the 'random' component is
obtained from either a true random generator, or from a
pseudorandom generator, and the 'delta' component is
computed as follows:
- a temporary variable is initialized to the existing value
of K;
- if the length of the keyNew is greater than L octets,
then:
- the random component is appended to the value of the
temporary variable, and the result is input to the
the hash algorithm H to produce a digest value, and
the temporary variable is set to this digest value;
- the value of the temporary variable is XOR-ed with
the first (next) L-octets (16 octets in case of MD5)
of the keyNew to produce the first (next) L-octets
(16 octets in case of MD5) of the 'delta' component.
- the above two steps are repeated until the unused
portion of the keyNew component is L octets or less,
- the random component is appended to the value of the
temporary variable, and the result is input to the
hash algorithm H to produce a digest value;
- this digest value, truncated if necessary to be the same
length as the unused portion of the keyNew, is XOR-ed
with the unused portion of the keyNew to produce the
(final portion of the) 'delta' component.
For example, using MD5 as the hash algorithm H:
iterations = (lenOfDelta - 1)/16; /* integer division */
temp = keyOld;
for (i = 0; i < iterations; i++) {
temp = MD5 (temp || random);
delta[i*16 .. (i*16)+15] =
temp XOR keyNew[i*16 .. (i*16)+15];
}
temp = MD5 (temp || random);
delta[i*16 .. lenOfDelta-1] =
temp XOR keyNew[i*16 .. lenOfDelta-1];
The 'random' and 'delta' components are then concatenated as
described above, and the resulting octet string is sent to
the recipient as the new value of an instance of this object.
At the receiver side, when an instance of this object is set
to a new value, then a new value of K is computed as follows:
- a temporary variable is initialized to the existing value
of K;
- if the length of the delta component is greater than L
octets, then:
- the random component is appended to the value of the
temporary variable, and the result is input to the
hash algorithm H to produce a digest value, and the
temporary variable is set to this digest value;
- the value of the temporary variable is XOR-ed with
the first (next) L-octets (16 octets in case of MD5)
of the delta component to produce the first (next)
L-octets (16 octets in case of MD5) of the new value
of K.
- the above two steps are repeated until the unused
portion of the delta component is L octets or less,
- the random component is appended to the value of the
temporary variable, and the result is input to the
hash algorithm H to produce a digest value;
- this digest value, truncated if necessary to be the same
length as the unused portion of the delta component, is
XOR-ed with the unused portion of the delta component to
produce the (final portion of the) new value of K.
For example, using MD5 as the hash algorithm H:
iterations = (lenOfDelta - 1)/16; /* integer division */
temp = keyOld;
for (i = 0; i < iterations; i++) {
temp = MD5 (temp || random);
keyNew[i*16 .. (i*16)+15] =
temp XOR delta[i*16 .. (i*16)+15];
}
temp = MD5 (temp || random);
keyNew[i*16 .. lenOfDelta-1] =
temp XOR delta[i*16 .. lenOfDelta-1];
The value of an object with this syntax, whenever it is
retrieved by the management protocol, is always the zero
length string.
Note that the keyOld and keyNew are the localized keys.
Note that it is probably wise that when an SNMP entity sends
a SetRequest to change a key, that it keeps a copy of the old
key until it has confirmed that the key change actually
succeeded.
"
SYNTAX OCTET STRING
bosUsmUser OBJECT IDENTIFIER ::= { snmpv3 1 }
bosVacmObjects OBJECT IDENTIFIER ::= { snmpv3 2 }
bosSnmpTargetObjects OBJECT IDENTIFIER ::= { snmpv3 3 }
bosSnmpNotifyObjects OBJECT IDENTIFIER ::= { snmpv3 4 }
bosSnmpCommunityObjects OBJECT IDENTIFIER ::= { snmpv3 5 }
bosUsmUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosUsmUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of users configured in the SNMP engine's
Local Configuration Datastore (LCD).
To create a new user (i.e., to instantiate a new
conceptual row in this table), it is recommended to
follow this procedure:
1) GET(usmUserSpinLock.0) and save in sValue.
2) SET(usmUserSpinLock.0=sValue,
usmUserCloneFrom=templateUser,
usmUserStatus=createAndWait)
You should use a template user to clone from
which has the proper auth/priv protocol defined.
If the new user is to use privacy:
3) generate the keyChange value based on the secret
privKey of the clone-from user and the secret key
to be used for the new user. Let us call this
pkcValue.
4) GET(usmUserSpinLock.0) and save in sValue.
5) SET(usmUserSpinLock.0=sValue,
usmUserPrivKeyChange=pkcValue
usmUserPublic=randomValue1)
6) GET(usmUserPulic) and check it has randomValue1.
If not, repeat steps 4-6.
If the new user will never use privacy:
7) SET(usmUserPrivProtocol=usmNoPrivProtocol)
If the new user is to use authentication:
8) generate the keyChange value based on the secret
authKey of the clone-from user and the secret key
to be used for the new user. Let us call this
akcValue.
9) GET(usmUserSpinLock.0) and save in sValue.
10) SET(usmUserSpinLock.0=sValue,
usmUserAuthKeyChange=akcValue
usmUserPublic=randomValue2)
11) GET(usmUserPulic) and check it has randomValue2.
If not, repeat steps 9-11.
If the new user will never use authentication:
12) SET(usmUserAuthProtocol=usmNoAuthProtocol)
Finally, activate the new user:
13) SET(usmUserStatus=active)
The new user should now be available and ready to be
used for SNMPv3 communication. Note however that access
to MIB data must be provided via configuration of the
SNMP-VIEW-BASED-ACM-MIB.
The use of usmUserSpinlock is to avoid conflicts with
another SNMP command generator application which may
also be acting on the usmUserTable.
"
::= { bosUsmUser 1 }
bosUsmUserEntry OBJECT-TYPE
SYNTAX BosUsmUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A user configured in the SNMP engine's Local
Configuration Datastore (LCD) for the User-based
Security Model.
"
INDEX { bosUsmUserTableIndex }
::= { bosUsmUserTable 1 }
BosUsmUserEntry ::= SEQUENCE
{
bosUsmUserTableIndex Unsigned32,
bosUsmUserName SnmpAdminString,
bosUsmUserSecurityName SnmpAdminString,
bosUsmUserCloneFrom RowPointer,
bosUsmUserAuthProtocol AutonomousType,
bosUsmUserAuthKeyChange BosKeyChange,
bosUsmUserOwnAuthKeyChange BosKeyChange,
bosUsmUserPrivProtocol AutonomousType,
bosUsmUserPrivKeyChange BosKeyChange,
bosUsmUserOwnPrivKeyChange BosKeyChange,
bosUsmUserPublic OCTET STRING,
bosUsmUserStorageType StorageType,
bosUsmUserStatus RowStatus
}
bosUsmUserTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"USM user table index ."
::= { bosUsmUserEntry 1 }
bosUsmUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.
"
::= { bosUsmUserEntry 2 }
bosUsmUserSecurityName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A human readable string representing the user in
Security Model independent format.
The default transformation of the User-based Security
Model dependent security ID to the securityName and
vice versa is the identity function so that the
securityName is the same as the userName.
"
::= { bosUsmUserEntry 3 }
bosUsmUserCloneFrom OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A pointer to another conceptual row in this
usmUserTable. The user in this other conceptual
row is called the clone-from user.
When a new user is created (i.e., a new conceptual
row is instantiated in this table), the privacy and
authentication parameters of the new user must be
cloned from its clone-from user. These parameters are:
- authentication protocol (usmUserAuthProtocol)
- privacy protocol (usmUserPrivProtocol)
They will be copied regardless of what the current
value is.
Cloning also causes the initial values of the secret
authentication key (authKey) and the secret encryption
key (privKey) of the new user to be set to the same
values as the corresponding secrets of the clone-from
user to allow the KeyChange process to occur as
required during user creation.
The first time an instance of this object is set by
a management operation (either at or after its
instantiation), the cloning process is invoked.
Subsequent writes are successful but invoke no
action to be taken by the receiver.
The cloning process fails with an 'inconsistentName'
error if the conceptual row representing the
clone-from user does not exist or is not in an active
state when the cloning process is invoked.
When this object is read, the ZeroDotZero OID
is returned.
"
::= { bosUsmUserEntry 4 }
bosUsmUserAuthProtocol OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the usmNoAuthProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than usmNoAuthProtocol, then an 'inconsistentValue'
error must be returned.
If a set operation tries to set the value to the
usmNoAuthProtocol while the usmUserPrivProtocol value
in the same row is not equal to usmNoPrivProtocol,
then an 'inconsistentValue' error must be returned.
That means that an SNMP command generator application
must first ensure that the usmUserPrivProtocol is set
to the usmNoPrivProtocol value before it can set
the usmUserAuthProtocol value to usmNoAuthProtocol.
"
DEFVAL { usmNoAuthProtocol }
::= { bosUsmUserEntry 5 }
bosUsmUserAuthKeyChange OBJECT-TYPE
SYNTAX BosKeyChange -- typically (SIZE (0 | 32)) for HMACMD5
-- typically (SIZE (0 | 40)) for HMACSHA
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An object, which when modified, causes the secret
authentication key used for messages sent on behalf
of this user to/from the SNMP engine identified by
usmUserEngineID, to be modified via a one-way
function.
The associated protocol is the usmUserAuthProtocol.
The associated secret key is the user's secret
authentication key (authKey). The associated hash
algorithm is the algorithm used by the user's
usmUserAuthProtocol.
When creating a new user, it is an 'inconsistentName'
error for a set operation to refer to this object
unless it is previously or concurrently initialized
through a set operation on the corresponding instance
of usmUserCloneFrom.
When the value of the corresponding usmUserAuthProtocol
is usmNoAuthProtocol, then a set is successful, but
effectively is a no-op.
When this object is read, the zero-length (empty)
string is returned.
The recommended way to do a key change is as follows:
1) GET(usmUserSpinLock.0) and save in sValue.
2) generate the keyChange value based on the old
(existing) secret key and the new secret key,
let us call this kcValue.
If you do the key change on behalf of another user:
3) SET(usmUserSpinLock.0=sValue,
usmUserAuthKeyChange=kcValue
usmUserPublic=randomValue)
If you do the key change for yourself:
4) SET(usmUserSpinLock.0=sValue,
usmUserOwnAuthKeyChange=kcValue
usmUserPublic=randomValue)
If you get a response with error-status of noError,
then the SET succeeded and the new key is active.
If you do not get a response, then you can issue a
GET(usmUserPublic) and check if the value is equal
to the randomValue you did send in the SET. If so, then
the key change succeeded and the new key is active
(probably the response got lost). If not, then the SET
request probably never reached the target and so you
can start over with the procedure above.
"
DEFVAL { ''H } -- the empty string
::= { bosUsmUserEntry 6 }
bosUsmUserOwnAuthKeyChange OBJECT-TYPE
SYNTAX BosKeyChange -- typically (SIZE (0 | 32)) for HMACMD5
-- typically (SIZE (0 | 40)) for HMACSHA
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Behaves exactly as usmUserAuthKeyChange, with one
notable difference: in order for the set operation
to succeed, the usmUserName of the operation
requester must match the usmUserName that
indexes the row which is targeted by this
operation.
In addition, the USM security model must be
used for this operation.
The idea here is that access to this column can be
public, since it will only allow a user to change
his own secret authentication key (authKey).
Note that this can only be done once the row is active.
When a set is received and the usmUserName of the
requester is not the same as the umsUserName that
indexes the row which is targeted by this operation,
then a 'noAccess' error must be returned.
When a set is received and the security model in use
is not USM, then a 'noAccess' error must be returned.
"
DEFVAL { ''H } -- the empty string
::= { bosUsmUserEntry 7 }
bosUsmUserPrivProtocol OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the usmNoPrivProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than usmNoPrivProtocol, then an 'inconsistentValue'
error must be returned.
Note that if any privacy protocol is used, then you
must also use an authentication protocol. In other
words, if usmUserPrivProtocol is set to anything else
than usmNoPrivProtocol, then the corresponding instance
of usmUserAuthProtocol cannot have a value of
usmNoAuthProtocol. If it does, then an
'inconsistentValue' error must be returned.
"
DEFVAL { usmNoPrivProtocol }
::= { bosUsmUserEntry 8 }
bosUsmUserPrivKeyChange OBJECT-TYPE
SYNTAX BosKeyChange -- typically (SIZE (0 | 32)) for DES
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An object, which when modified, causes the secret
encryption key used for messages sent on behalf
of this user to/from the SNMP engine identified by
usmUserEngineID, to be modified via a one-way
function.
The associated protocol is the usmUserPrivProtocol.
The associated secret key is the user's secret
privacy key (privKey). The associated hash
algorithm is the algorithm used by the user's
usmUserAuthProtocol.
When creating a new user, it is an 'inconsistentName'
error for a set operation to refer to this object
unless it is previously or concurrently initialized
through a set operation on the corresponding instance
of usmUserCloneFrom.
When the value of the corresponding usmUserPrivProtocol
is usmNoPrivProtocol, then a set is successful, but
effectively is a no-op.
When this object is read, the zero-length (empty)
string is returned.
See the description clause of usmUserAuthKeyChange for
a recommended procedure to do a key change.
"
DEFVAL { ''H } -- the empty string
::= { bosUsmUserEntry 9 }
bosUsmUserOwnPrivKeyChange OBJECT-TYPE
SYNTAX BosKeyChange -- typically (SIZE (0 | 32)) for DES
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Behaves exactly as usmUserPrivKeyChange, with one
notable difference: in order for the Set operation
to succeed, the usmUserName of the operation
requester must match the usmUserName that indexes
the row which is targeted by this operation.
In addition, the USM security model must be
used for this operation.
The idea here is that access to this column can be
public, since it will only allow a user to change
his own secret privacy key (privKey).
Note that this can only be done once the row is active.
When a set is received and the usmUserName of the
requester is not the same as the umsUserName that
indexes the row which is targeted by this operation,
then a 'noAccess' error must be returned.
When a set is received and the security model in use
is not USM, then a 'noAccess' error must be returned.
"
DEFVAL { ''H } -- the empty string
::= { bosUsmUserEntry 10 }
bosUsmUserPublic OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A publicly-readable value which can be written as part
of the procedure for changing a user's secret
authentication and/or privacy key, and later read to
determine whether the change of the secret was
effected.
"
DEFVAL { ''H } -- the empty string
::= { bosUsmUserEntry 11 }
bosUsmUserStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' must
allow write-access at a minimum to:
- usmUserAuthKeyChange, usmUserOwnAuthKeyChange
and usmUserPublic for a user who employs
authentication, and
- usmUserPrivKeyChange, usmUserOwnPrivKeyChange
and usmUserPublic for a user who employs
privacy.
Note that any user who employs authentication or
privacy must allow its secret(s) to be updated and
thus cannot be 'readOnly'.
If an initial set operation tries to set the value to
'readOnly' for a user who employs authentication or
privacy, then an 'inconsistentValue' error must be
returned. Note that if the value has been previously
set (implicit or explicit) to any value, then the rules
as defined in the StorageType Textual Convention apply.
It is an implementation issue to decide if a SET for
a readOnly or permanent row is accepted at all. In some
contexts this may make sense, in others it may not. If
a SET for a readOnly or permanent row is not accepted
at all, then a 'wrongValue' error must be returned.
"
DEFVAL { nonVolatile }
::= { bosUsmUserEntry 12 }
bosUsmUserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified,
except for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.
"
::= { bosUsmUserEntry 13 }
-- Information about Groups ******************************************
bosVacmSecurityToGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosVacmSecurityToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table maps a combination of securityModel and
securityName into a groupName which is used to define
an access control policy for a group of principals.
"
::= { bosVacmObjects 1 }
bosVacmSecurityToGroupEntry OBJECT-TYPE
SYNTAX BosVacmSecurityToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in this table maps the combination of a
securityModel and securityName into a groupName.
"
INDEX {
bosVacmSecurityToGroupTableIndex
}
::= { bosVacmSecurityToGroupTable 1 }
BosVacmSecurityToGroupEntry ::= SEQUENCE
{
bosVacmSecurityToGroupTableIndex Unsigned32,
bosVacmGroupName SnmpAdminString,
bosVacmSecurityToGroupStorageType StorageType,
bosVacmSecurityToGroupStatus RowStatus
}
bosVacmSecurityToGroupTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VacmSecurityToGroupTable index ."
::= { bosVacmSecurityToGroupEntry 1 }
bosVacmGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.
"
::= { bosVacmSecurityToGroupEntry 2 }
bosVacmSecurityToGroupStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
"
DEFVAL { nonVolatile }
::= { bosVacmSecurityToGroupEntry 3 }
bosVacmSecurityToGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the vacmSecurityToGroupStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until a value has been set for vacmGroupName.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { bosVacmSecurityToGroupEntry 4 }
-- Information about Access Rights
bosVacmAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosVacmAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of access rights for groups.
Each entry is indexed by a groupName, a contextPrefix,
a securityModel and a securityLevel. To determine
whether access is allowed, one entry from this table
needs to be selected and the proper viewName from that
entry must be used for access control checking.
To select the proper entry, follow these steps:
1) the set of possible matches is formed by the
intersection of the following sets of entries:
the set of entries with identical vacmGroupName
the union of these two sets:
- the set with identical vacmAccessContextPrefix
- the set of entries with vacmAccessContextMatch
value of 'prefix' and matching
vacmAccessContextPrefix
intersected with the union of these two sets:
- the set of entries with identical
vacmSecurityModel
- the set of entries with vacmSecurityModel
value of 'any'
intersected with the set of entries with
vacmAccessSecurityLevel value less than or equal
to the requested securityLevel
2) if this set has only one member, we're done
otherwise, it comes down to deciding how to weight
the preferences between ContextPrefixes,
SecurityModels, and SecurityLevels as follows:
a) if the subset of entries with securityModel
matching the securityModel in the message is
not empty, then discard the rest.
b) if the subset of entries with
vacmAccessContextPrefix matching the contextName
in the message is not empty,
then discard the rest
c) discard all entries with ContextPrefixes shorter
than the longest one remaining in the set
d) select the entry with the highest securityLevel
Please note that for securityLevel noAuthNoPriv, all
groups are really equivalent since the assumption that
the securityName has been authenticated does not hold.
"
::= { bosVacmObjects 2 }
bosVacmAccessEntry OBJECT-TYPE
SYNTAX BosVacmAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An access right configured in the Local Configuration
Datastore (LCD) authorizing access to an SNMP context.
Entries in this table can use an instance value for
object vacmGroupName even if no entry in table
vacmAccessSecurityToGroupTable has a corresponding
value for object vacmGroupName.
"
INDEX { bosVacmAccessTableIndex }
::= { bosVacmAccessTable 1 }
BosVacmAccessEntry ::= SEQUENCE
{
bosVacmAccessTableIndex Unsigned32,
bosVacmAccessContextMatch INTEGER,
bosVacmAccessReadViewName SnmpAdminString,
bosVacmAccessWriteViewName SnmpAdminString,
bosVacmAccessNotifyViewName SnmpAdminString,
bosVacmAccessStorageType StorageType,
bosVacmAccessStatus RowStatus
}
bosVacmAccessTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vacm Access table index ."
::= { bosVacmAccessEntry 1 }
bosVacmAccessContextMatch OBJECT-TYPE
SYNTAX INTEGER
{ exact (1), -- exact match of prefix and contextName
prefix (2) -- Only match to the prefix
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the value of this object is exact(1), then all
rows where the contextName exactly matches
vacmAccessContextPrefix are selected.
If the value of this object is prefix(2), then all
rows where the contextName whose starting octets
exactly match vacmAccessContextPrefix are selected.
This allows for a simple form of wildcarding.
"
DEFVAL { exact }
::= { bosVacmAccessEntry 2 }
bosVacmAccessReadViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
DEFVAL { ''H } -- the empty string
::= { bosVacmAccessEntry 3 }
bosVacmAccessWriteViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
DEFVAL { ''H } -- the empty string
::= { bosVacmAccessEntry 4 }
bosVacmAccessNotifyViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
DEFVAL { ''H } -- the empty string
::= { bosVacmAccessEntry 5 }
bosVacmAccessStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
"
DEFVAL { nonVolatile }
::= { bosVacmAccessEntry 6 }
bosVacmAccessStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { bosVacmAccessEntry 7 }
bosVacmViewTreeFamilyTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosVacmViewTreeFamilyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Locally held information about families of subtrees
within MIB views.
Each MIB view is defined by two sets of view subtrees:
- the included view subtrees, and
- the excluded view subtrees."
::= { bosVacmObjects 3 }
bosVacmViewTreeFamilyEntry OBJECT-TYPE
SYNTAX BosVacmViewTreeFamilyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information on a particular family of view subtrees
included in or excluded from a particular SNMP
context's MIB view.
Implementations must not restrict the number of
families of view subtrees for a given MIB view,
except as dictated by resource constraints on the
overall number of entries in the
vacmViewTreeFamilyTable.
If no conceptual rows exist in this table for a given
MIB view (viewName), that view may be thought of as
consisting of the empty set of view subtrees.
"
INDEX { bosVacmViewTreeFamilyTableIndex
}
::= { bosVacmViewTreeFamilyTable 1 }
BosVacmViewTreeFamilyEntry ::= SEQUENCE
{
bosVacmViewTreeFamilyTableIndex INTEGER,
bosVacmViewTreeFamilyMask OCTET STRING,
bosVacmViewTreeFamilyType INTEGER,
bosVacmViewTreeFamilyStorageType StorageType,
bosVacmViewTreeFamilyStatus RowStatus
}
bosVacmViewTreeFamilyTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vacm View Tree Family Index"
::= { bosVacmViewTreeFamilyEntry 1 }
bosVacmViewTreeFamilyMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bit mask which, in combination with the
corresponding instance of vacmViewTreeFamilySubtree,
defines a family of view subtrees.
"
DEFVAL { ''H }
::= { bosVacmViewTreeFamilyEntry 2 }
bosVacmViewTreeFamilyType OBJECT-TYPE
SYNTAX INTEGER { included(1), excluded(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether the corresponding instances of
vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.
"
DEFVAL { included }
::= { bosVacmViewTreeFamilyEntry 3 }
bosVacmViewTreeFamilyStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
"
DEFVAL { nonVolatile }
::= { bosVacmViewTreeFamilyEntry 4 }
bosVacmViewTreeFamilyStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION " "
::= { bosVacmViewTreeFamilyEntry 5 }
--Target Table
SnmpTagValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255t"
STATUS current
DESCRIPTION
"An octet string containing a tag value.
Tag values are preferably in human-readable form.
To facilitate internationalization, this information
is represented using the ISO/IEC IS 10646-1 character
set, encoded as an octet string using the UTF-8
character encoding scheme described in RFC 2279.
Since additional code points are added by amendments
to the 10646 standard from time to time,
implementations must be prepared to encounter any code
point from 0x00000000 to 0x7fffffff.
The use of control codes should be avoided, and certain
control codes are not allowed as described below.
For code points not directly supported by user
interface hardware or software, an alternative means
of entry and display, such as hexadecimal, may be
provided.
For information encoded in 7-bit US-ASCII, the UTF-8
representation is identical to the US-ASCII encoding.
Note that when this TC is used for an object that
is used or envisioned to be used as an index, then a
SIZE restriction must be specified so that the number
of sub-identifiers for any object instance does not
exceed the limit of 128, as defined by [RFC1905].
An object of this type contains a single tag value
which is used to select a set of entries in a table.
A tag value is an arbitrary string of octets, but
may not contain a delimiter character. Delimiter
characters are defined to be one of the following:
- An ASCII space character (0x20).
- An ASCII TAB character (0x09).
- An ASCII carriage return (CR) character (0x0D).
- An ASCII line feed (LF) character (0x0A).
Delimiter characters are used to separate tag values
in a tag list. An object of this type may only
contain a single tag value, and so delimiter
characters are not allowed in a value of this type.
Note that a tag value of 0 length means that no tag is
defined. In other words, a tag value of 0 length would
never match anything in a tag list, and would never
select any table entries.
Some examples of valid tag values are:
- 'acme'
- 'router'
- 'host'
The use of a tag value to select table entries is
application and MIB specific."
SYNTAX OCTET STRING (SIZE (0..255))
SnmpTagList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255t"
STATUS current
DESCRIPTION
"An octet string containing a list of tag values.
Tag values are preferably in human-readable form.
To facilitate internationalization, this information
is represented using the ISO/IEC IS 10646-1 character
set, encoded as an octet string using the UTF-8
character encoding scheme described in RFC 2279.
Since additional code points are added by amendments
to the 10646 standard from time to time,
implementations must be prepared to encounter any code
point from 0x00000000 to 0x7fffffff.
The use of control codes should be avoided, except as
described below.
For code points not directly supported by user
interface hardware or software, an alternative means
of entry and display, such as hexadecimal, may be
provided.
For information encoded in 7-bit US-ASCII, the UTF-8
representation is identical to the US-ASCII encoding.
An object of this type contains a list of tag values
which are used to select a set of entries in a table.
A tag value is an arbitrary string of octets, but
may not contain a delimiter character. Delimiter
characters are defined to be one of the following:
- An ASCII space character (0x20).
- An ASCII TAB character (0x09).
- An ASCII carriage return (CR) character (0x0D).
- An ASCII line feed (LF) character (0x0A).
Delimiter characters are used to separate tag values
in a tag list. Only a single delimiter character may
occur between two tag values. A tag value may not
have a zero length. These constraints imply certain
restrictions on the contents of this object:
- There cannot be a leading or trailing delimiter
character.
- There cannot be multiple adjacent delimiter
characters.
Some examples of valid tag lists are:
- '' -- an empty list
- 'acme' -- list of one tag
- 'host router bridge' -- list of several tags
Note that although a tag value may not have a length of
zero, an empty string is still valid. This indicates
an empty list (i.e. there are no tag values in the list).
The use of the tag list to select table entries is
application and MIB specific. Typically, an application
will provide one or more tag values, and any entry
which contains some combination of these tag values
will be selected."
SYNTAX OCTET STRING (SIZE (0..255))
bossnmpTargetAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnmpTargetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of transport addresses to be used in the generation
of SNMP messages."
::= { bosSnmpTargetObjects 1 }
bosSnmpTargetAddrEntry OBJECT-TYPE
SYNTAX BosSnmpTargetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A transport address to be used in the generation
of SNMP operations.
Entries in the snmpTargetAddrTable are created and
deleted using the snmpTargetAddrRowStatus object."
INDEX { bossnmpTargetTableIndex }
::= { bossnmpTargetAddrTable 1 }
BosSnmpTargetAddrEntry ::= SEQUENCE
{
bossnmpTargetTableIndex Unsigned32,
bossnmpTargetAddrTDomain TDomain,
bossnmpTargetAddrTAddress TAddress,
bossnmpTargetAddrTimeout TimeInterval,
bossnmpTargetAddrRetryCount Integer32,
bossnmpTargetAddrTagList SnmpTagList,
bossnmpTargetAddrParams SnmpAdminString,
bossnmpTargetAddrStorageType StorageType,
bossnmpTargetAddrRowStatus RowStatus
}
bossnmpTargetTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Target table index ."
::= { bosSnmpTargetAddrEntry 1 }
bossnmpTargetAddrTDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the transport type of the address
contained in the snmpTargetAddrTAddress object."
::= { bosSnmpTargetAddrEntry 2 }
bossnmpTargetAddrTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object."
::= { bosSnmpTargetAddrEntry 3 }
bossnmpTargetAddrTimeout OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object should reflect the expected maximum round
trip time for communicating with the transport address
defined by this row. When a message is sent to this
address, and a response (if one is expected) is not
received within this time period, an implementation
may assume that the response will not be delivered.
Note that the time interval that an application waits
for a response may actually be derived from the value
of this object. The method for deriving the actual time
interval is implementation dependent. One such method
is to derive the expected round trip time based on a
particular retransmission algorithm and on the number
of timeouts which have occurred. The type of message may
also be considered when deriving expected round trip
times for retransmissions. For example, if a message is
being sent with a securityLevel that indicates both
authentication and privacy, the derived value may be
increased to compensate for extra processing time spent
during authentication and encryption processing."
DEFVAL { 1500 }
::= { bosSnmpTargetAddrEntry 4 }
bossnmpTargetAddrRetryCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies a default number of retries to be
attempted when a response is not received for a generated
message. An application may provide its own retry count,
in which case the value of this object is ignored."
DEFVAL { 3 }
::= { bosSnmpTargetAddrEntry 5 }
bossnmpTargetAddrTagList OBJECT-TYPE
SYNTAX SnmpTagList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains a list of tag values which are
used to select target addresses for a particular
operation."
DEFVAL { "" }
::= { bosSnmpTargetAddrEntry 6 }
bossnmpTargetAddrParams OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies an entry in the
snmpTargetParamsTable. The identified entry
contains SNMP parameters to be used when generating
messages to be sent to this transport address."
::= { bosSnmpTargetAddrEntry 7 }
bossnmpTargetAddrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { bosSnmpTargetAddrEntry 8 }
bossnmpTargetAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the snmpTargetAddrRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding instances of
snmpTargetAddrTDomain, snmpTargetAddrTAddress, and
snmpTargetAddrParams have all been set.
The following objects may not be modified while the
value of this object is active(1):
- snmpTargetAddrTDomain
- snmpTargetAddrTAddress
An attempt to set these objects while the value of
snmpTargetAddrRowStatus is active(1) will result in
an inconsistentValue error."
::= { bosSnmpTargetAddrEntry 9 }
bosSnmpTargetParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnmpTargetParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of SNMP target information to be used
in the generation of SNMP messages."
::= { bosSnmpTargetObjects 2 }
bosSnmpTargetParamsEntry OBJECT-TYPE
SYNTAX BosSnmpTargetParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of SNMP target information.
Entries in the snmpTargetParamsTable are created and
deleted using the snmpTargetParamsRowStatus object."
INDEX { bosSnmpTargetParamsTableIndex }
::= {bosSnmpTargetParamsTable 1 }
BosSnmpTargetParamsEntry ::= SEQUENCE
{
bosSnmpTargetParamsTableIndex Unsigned32,
bosSnmpTargetParamsMPModel SnmpMessageProcessingModel,
bosSnmpTargetParamsSecurityModel SnmpSecurityModel,
bosSnmpTargetParamsSecurityName SnmpAdminString,
bosSnmpTargetParamsSecurityLevel SnmpSecurityLevel,
bosSnmpTargetParamsStorageType StorageType,
bosSnmpTargetParamsRowStatus RowStatus
}
bosSnmpTargetParamsTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Target Params table index ."
::= { bosSnmpTargetParamsEntry 1 }
bosSnmpTargetParamsMPModel OBJECT-TYPE
SYNTAX SnmpMessageProcessingModel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Message Processing Model to be used when generating
SNMP messages using this entry."
::= { bosSnmpTargetParamsEntry 2 }
bosSnmpTargetParamsSecurityModel OBJECT-TYPE
SYNTAX SnmpSecurityModel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Security Model to be used when generating SNMP
messages using this entry. An implementation may
choose to return an inconsistentValue error if an
attempt is made to set this variable to a value
for a security model which the implementation does
not support."
::= { bosSnmpTargetParamsEntry 3}
bosSnmpTargetParamsSecurityName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The securityName which identifies the Principal on
whose behalf SNMP messages will be generated using
this entry."
::= { bosSnmpTargetParamsEntry 4 }
bosSnmpTargetParamsSecurityLevel OBJECT-TYPE
SYNTAX SnmpSecurityLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Level of Security to be used when generating
SNMP messages using this entry."
::= { bosSnmpTargetParamsEntry 5 }
bosSnmpTargetParamsStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { bosSnmpTargetParamsEntry 6 }
bosSnmpTargetParamsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the snmpTargetParamsRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding
snmpTargetParamsMPModel,
snmpTargetParamsSecurityModel,
snmpTargetParamsSecurityName,
and snmpTargetParamsSecurityLevel have all been set.
The following objects may not be modified while the
value of this object is active(1):
- snmpTargetParamsMPModel
- snmpTargetParamsSecurityModel
- snmpTargetParamsSecurityName
- snmpTargetParamsSecurityLevel
An attempt to set these objects while the value of
snmpTargetParamsRowStatus is active(1) will result in
an inconsistentValue error."
::= { bosSnmpTargetParamsEntry 7 }
bosSnmpNotifyTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnmpNotifyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to select management targets which should
receive notifications, as well as the type of notification
which should be sent to each selected management target."
::= { bosSnmpNotifyObjects 1 }
bosSnmpNotifyEntry OBJECT-TYPE
SYNTAX BosSnmpNotifyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table selects a set of management targets
which should receive notifications, as well as the type of
notification which should be sent to each selected
management target.
Entries in the snmpNotifyTable are created and
deleted using the snmpNotifyRowStatus object."
INDEX { bosSnmpNotifyTableIndex }
::= { bosSnmpNotifyTable 1 }
BosSnmpNotifyEntry ::= SEQUENCE
{
bosSnmpNotifyTableIndex Unsigned32,
bosSnmpNotifyTag SnmpTagValue,
bosSnmpNotifyType INTEGER,
bosSnmpNotifyStorageType StorageType,
bosSnmpNotifyRowStatus RowStatus
}
bosSnmpNotifyTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Notify table index ."
::= { bosSnmpNotifyEntry 1 }
bosSnmpNotifyTag OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains a single tag value which is used
to select entries in the snmpTargetAddrTable. Any entry
in the snmpTargetAddrTable which contains a tag value
which is equal to the value of an instance of this
object is selected. If this object contains a value
of zero length, no entries are selected."
DEFVAL { "" }
::= { bosSnmpNotifyEntry 2 }
bosSnmpNotifyType OBJECT-TYPE
SYNTAX INTEGER {
trap(1),
inform(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object determines the type of notification to
be generated for entries in the snmpTargetAddrTable
selected by the corresponding instance of
snmpNotifyTag. This value is only used when
generating notifications, and is ignored when
using the snmpTargetAddrTable for other purposes.
If the value of this object is trap(1), then any
messages generated for selected rows will contain
Unconfirmed-Class PDUs.
If the value of this object is inform(2), then any
messages generated for selected rows will contain
Confirmed-Class PDUs.
Note that if an SNMP entity only supports
generation of Unconfirmed-Class PDUs (and not
Confirmed-Class PDUs), then this object may be
read-only."
DEFVAL { trap }
::= { bosSnmpNotifyEntry 3 }
bosSnmpNotifyStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { bosSnmpNotifyEntry 4 }
bosSnmpNotifyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5)."
::= { bosSnmpNotifyEntry 5 }
bosSnmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of community strings configured in the SNMP
engine's Local Configuration Datastore (LCD)."
::= { bosSnmpCommunityObjects 1 }
bosSnmpCommunityEntry OBJECT-TYPE
SYNTAX BosSnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular community string."
INDEX { bosSnmpCommunityTableIndex }
::= { bosSnmpCommunityTable 1 }
BosSnmpCommunityEntry ::= SEQUENCE
{
bosSnmpCommunityTableIndex Unsigned32,
bosSnmpCommunityName OCTET STRING,
bosSnmpCommunitySecurityName SnmpAdminString,
bosSnmpCommunityContextEngineID SnmpEngineID,
bosSnmpCommunityContextName SnmpAdminString,
bosSnmpCommunityTransportTag SnmpTagValue,
bosSnmpCommunityStorageType StorageType,
bosSnmpCommunityStatus RowStatus
}
bosSnmpCommunityTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Community Table Index."
::= { bosSnmpCommunityEntry 1 }
bosSnmpCommunityName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The community string for which a row in this table
represents a configuration. There is no SIZE constraint
specified for this object because RFC 1157 does not
impose any explicit limitation on the length of community
strings (their size is constrained indirectly by the
SNMP message size)."
::= { bosSnmpCommunityEntry 2 }
bosSnmpCommunitySecurityName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A human readable string representing the corresponding
value of snmpCommunityName in a Security Model
independent format."
::= { bosSnmpCommunityEntry 3 }
bosSnmpCommunityContextEngineID OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contextEngineID indicating the location of the
context in which management information is accessed
when using the community string specified by the
corresponding instance of snmpCommunityName.
The default value is the snmpEngineID of the entity in
which this object is instantiated."
::= { bosSnmpCommunityEntry 4 }
bosSnmpCommunityContextName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The context in which management information is accessed
when using the community string specified by the
corresponding instance of snmpCommunityName."
DEFVAL { ''H } -- the empty string
::= { bosSnmpCommunityEntry 5 }
bosSnmpCommunityTransportTag OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies a set of transport endpoints
which are used in two ways:
- to specify the transport endpoints from which an
SNMP entity will accept management requests, and
- to specify the transport endpoints to which a
notification may be sent using the community
string matching the corresponding instance of
snmpCommunityName.
In either case, if the value of this object has
zero-length, transport endpoints are not checked when
either authenticating messages containing this community
string, nor when generating notifications.
The transports identified by this object are specified
in the snmpTargetAddrTable. Entries in that table
whose snmpTargetAddrTagList contains this tag value
are identified.
If a management request containing a community string
that matches the corresponding instance of
snmpCommunityName is received on a transport endpoint
other than the transport endpoints identified by this
object the request is deemed unauthentic.
When a notification is to be sent using an entry in
this table, if the destination transport endpoint of
the notification does not match one of the transport
endpoints selected by this object, the notification
is not sent."
DEFVAL { ''H } -- the empty string
::= { bosSnmpCommunityEntry 6 }
bosSnmpCommunityStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
snmpCommunityTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row."
::= { bosSnmpCommunityEntry 7 }
bosSnmpCommunityStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the
snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1)."
::= { bosSnmpCommunityEntry 8 }
--snmpv3 OBJECTS STOP
-- IP group START
bosIpDefaultGatewayTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosIpDefaultGatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP default gateways"
::= { ip 2 }
bosIpDefaultGatewayEntry OBJECT-TYPE
SYNTAX BosIpDefaultGatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the default gatway IP table."
INDEX { bosIpDefaultGatewayIndex }
::= { bosIpDefaultGatewayTable 1 }
BosIpDefaultGatewayEntry ::= SEQUENCE {
bosIpDefaultGatewayIndex Integer32,
bosIpDefaultGatewayIpAddr IpAddress,
bosIpDefaultGatewayState INTEGER,
bosIpDefaultGatewayStatus INTEGER,
bosIpDefaultGatewayRowStatus RowStatus
}
bosIpDefaultGatewayIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The default gateway index. Currently only one default gateway
is supported.So the value of this attribute is always 1."
::= { bosIpDefaultGatewayEntry 1 }
bosIpDefaultGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default gateway IP address."
::= { bosIpDefaultGatewayEntry 2 }
bosIpDefaultGatewayStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default gateway administrative status."
::= { bosIpDefaultGatewayEntry 3 }
bosIpDefaultGatewayState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default gateway operational status. This object indicates
whether the gateway is reachable or not."
::= { bosIpDefaultGatewayEntry 4 }
bosIpDefaultGatewayRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a row in the IP default gateway table. By
'bosIpDefaultGatewayRowStatus' new entries can be created and
the existing entries can be removed from the IP default gateway table"
::= { bosIpDefaultGatewayEntry 5 }
-- IP group STOP
-- IGS Objects
igmpV3SnoopCfg OBJECT IDENTIFIER ::= { igs 2 }
igmpV3SnoopNewCfgSources OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of sources to snoop in a group record in new config."
::= { igmpV3SnoopCfg 1 }
igmpV3SnoopNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V3 Snooping."
::= { igmpV3SnoopCfg 2 }
igmpV3SnoopNewCfgExcludeEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping."
::= { igmpV3SnoopCfg 3 }
igmpV3SnoopNewCfgV1V2EnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V1/V2 Report Snooping."
::= { igmpV3SnoopCfg 4 }
igmpSnoopCfg OBJECT IDENTIFIER ::= { igs 3 }
igmpSnoopStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear IGMP snoop statistics. Read on this object always returns ok.
Setting ok has no effect. Setting value clear reset the snoop statistics"
::= { igmpSnoopCfg 2 }
igmpSnoopGroupClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the IGMP Group registrations. Read on this object always
returns ok.Setting ok has no effect. Setting value clear reset
the snoop statistics"
::= { igmpSnoopCfg 3 }
igmpSnoopMrouterClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the IGMP Mrouters learnt. Read on this object always
returns ok.Setting ok has no effect. Setting value clear reset
the snoop statistics"
::= { igmpSnoopCfg 4 }
bosSnoopVlanStatsClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopVlanStatsClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the objects for clearing the statistics."
::= { igmpSnoopCfg 5 }
bosSnoopVlanStatsClearEntry OBJECT-TYPE
SYNTAX BosSnoopVlanStatsClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the objects for clearing the VLAN statistics."
INDEX { bosSnoopVlanStatsClearVlanId }
::= { bosSnoopVlanStatsClearTable 1 }
BosSnoopVlanStatsClearEntry ::= SEQUENCE {
bosSnoopVlanStatsClearVlanId INTEGER,
bosSnoopVlanStatsClear INTEGER
}
bosSnoopVlanStatsClearVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for which statistics to be cleared"
::= { bosSnoopVlanStatsClearEntry 1}
bosSnoopVlanStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear IGMP snoop statistics on a particular VLAN. Read on this object
always returns ok.Setting ok has no effect. Setting value clear reset the
snoop statistics"
::= { bosSnoopVlanStatsClearEntry 2 }
igmpSnoopFloodStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contols the flooding of unknown IPMC packets. If enabled,
IPMC packets are flooded on vlan members.Else, unknown IPMC packets will
not be flooded"
::= { igmpSnoopCfg 6 }
bosigmpSnoopVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosigmpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the configurations over snoop enabled vlans"
::= { igmpSnoopCfg 7 }
bosigmpSnoopVlanConfigEntry OBJECT-TYPE
SYNTAX BosigmpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the objects for configuring params for snoop enabled vlan."
INDEX { bosSnoopVlanConfigVlanId }
::= { bosigmpSnoopVlanConfigTable 1 }
BosigmpSnoopVlanConfigEntry ::= SEQUENCE {
bosSnoopVlanConfigVlanId INTEGER,
bosSnoopVlanConfigSrcIp IpAddress
}
bosSnoopVlanConfigVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for which snoop configuration to be done"
::= { bosigmpSnoopVlanConfigEntry 1}
bosSnoopVlanConfigSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in this vlan"
::= { bosigmpSnoopVlanConfigEntry 2 }
bosSnoopInfo OBJECT IDENTIFIER ::= { igs 4 }
bosSnoopInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP/MLD group membership information."
::= { bosSnoopInfo 1 }
bosSnoopInfoEntry OBJECT-TYPE
SYNTAX BosSnoopInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IGMP/MLD group member ."
INDEX {bosSnoopInfoAddressType,
bosSnoopInfoVlanId,
bosSnoopInfoGroupAddress,
bosSnoopInfoSourceAddress,
bosSnoopInfoPortNum }
::= { bosSnoopInfoTable 1 }
BosSnoopInfoEntry ::= SEQUENCE {
bosSnoopInfoAddressType InetAddressType,
bosSnoopInfoVlanId INTEGER,
bosSnoopInfoGroupAddress InetAddress,
bosSnoopInfoSourceAddress InetAddress,
bosSnoopInfoPortNum INTEGER,
bosSnoopInfoVersion INTEGER,
bosSnoopInfoExpires DisplayString,
bosSnoopInfoMode INTEGER,
bosSnoopInfoFwd INTEGER
}
bosSnoopInfoAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"InetAddressType pertaining to the Multicast forwarding entry"
::= { bosSnoopInfoEntry 1 }
bosSnoopInfoVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for this IGMP/MLD group."
::= { bosSnoopInfoEntry 2}
bosSnoopInfoGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the IGMP/MLD group."
::= { bosSnoopInfoEntry 3}
bosSnoopInfoSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of the data source that sends
multicast data for this group"
::= { bosSnoopInfoEntry 4 }
bosSnoopInfoPortNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The downstream member port"
::= { bosSnoopInfoEntry 5}
bosSnoopInfoVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2(2),
v3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Version of IGMP host."
::= { bosSnoopInfoEntry 6}
bosSnoopInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this host."
::= { bosSnoopInfoEntry 7 }
bosSnoopInfoMode OBJECT-TYPE
SYNTAX INTEGER {
none (0),
exclude(1),
include(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMPv3 filter-mode for this host."
::= { bosSnoopInfoEntry 8 }
bosSnoopInfoFwd OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMPv3 forwarding for this source/group IP for this host."
::= { bosSnoopInfoEntry 9 }
bosSnoopMrouterInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopMrouterInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the information learnt on a mrouter port"
::= { bosSnoopInfo 2 }
bosSnoopMrouterInfoEntry OBJECT-TYPE
SYNTAX BosSnoopMrouterInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information learnt on a mrouter port."
INDEX {bosSnoopMrouterInfoVlanId,
bosSnoopMrouterInfoPortNum }
::= { bosSnoopMrouterInfoTable 1 }
BosSnoopMrouterInfoEntry ::= SEQUENCE {
bosSnoopMrouterInfoVlanId INTEGER,
bosSnoopMrouterInfoPortNum INTEGER,
bosSnoopMrouterInfoExpires DisplayString,
bosSnoopMrouterInfoResponseTime INTEGER,
bosSnoopMrouterInfoQRV INTEGER,
bosSnoopMrouterInfoQQIC INTEGER
}
bosSnoopMrouterInfoVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN on whcih the Mrouter port presents."
::= { bosSnoopMrouterInfoEntry 1}
bosSnoopMrouterInfoPortNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port at which Mrouter presents"
::= { bosSnoopMrouterInfoEntry 2}
bosSnoopMrouterInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this mrouter port"
::= { bosSnoopMrouterInfoEntry 3 }
bosSnoopMrouterInfoResponseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The response time recorded from the Query message"
::= { bosSnoopMrouterInfoEntry 4}
bosSnoopMrouterInfoQRV OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QRV recorded from the IGMPv3 Query Message"
::= { bosSnoopMrouterInfoEntry 5}
bosSnoopMrouterInfoQQIC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QQIC recorded from the IGMPv3 Query Message"
::= { bosSnoopMrouterInfoEntry 6}
-- IGS OBJECTS STOP
-- QOS OBJECTS START
bosNewCfgPriorityCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Frame Priority and COSq configuration."
::= { qos 1 }
bosNewCfgPriorityCoSEntry OBJECT-TYPE
SYNTAX BosNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Frame Priority and COSq configuration."
INDEX { bosNewCfgPriorityIndex }
::= { bosNewCfgPriorityCoSTable 1 }
BosNewCfgPriorityCoSEntry ::= SEQUENCE {
bosNewCfgPriorityIndex INTEGER,
bosNewCfgPriorityCoSq INTEGER
}
bosNewCfgPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame priority Number"
::= { bosNewCfgPriorityCoSEntry 1 }
bosNewCfgPriorityCoSq OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoSq for a Frame Priority Should be between 0 and 7"
::= { bosNewCfgPriorityCoSEntry 2 }
bosNewCfgDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosNewCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Dscp to New Dscp/802.1p priority configuration."
::= { qos 4 }
bosNewCfgDscpEntry OBJECT-TYPE
SYNTAX BosNewCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Dscp to New Dscp/802.1p priority configuration"
INDEX { bosNewCfgDscpIndex }
::= { bosNewCfgDscpTable 1 }
BosNewCfgDscpEntry ::= SEQUENCE {
bosNewCfgDscpIndex INTEGER,
bosNewCfgMapCosQ INTEGER
}
bosNewCfgDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp value"
::= { bosNewCfgDscpEntry 1 }
bosNewCfgMapCosQ OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Map 802.1p value"
::= { bosNewCfgDscpEntry 4 }
bosNewCfgDscpState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable of DSCP globally in system (on all ports).
When Enable, bosNewCfgDscpTable entry (DSCP to COSQ mapping)
will be functional and DSCP value will be used for Scheduling.
When disabled, 802.1p will be used for Scheduling. "
::= { qos 5 }
-- QOS OBJECT STOP
--- Switch Objects
hwPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware part number of the Switch."
::= { switch 1 }
hwRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware revision. If the revision is not
available, a zero length string should be returned."
::= { switch 2 }
hwLastBoot OBJECT-TYPE
SYNTAX INTEGER {
powerCycle(1),
resetFromConsole(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason of the last boot.
"
::= { switch 3 }
hwMACAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address."
::= { switch 4 }
hwSwitchRunningSwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch software version."
::= { switch 5 }
hwFlashConfiguration OBJECT-TYPE
SYNTAX INTEGER {
factory(0),
active(1),
backup(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active flash configuration."
::= { switch 6 }
hwPCBAPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PCBA part number."
::= { switch 7 }
hwFABNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FAB Number"
::= { switch 8 }
hardwareSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch serial number."
::= { switch 9 }
hardwareManufacturingDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of manufacturing."
::= { switch 10 }
hwTemperatureSensor1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 1."
::= { switch 11 }
hwTemperatureSensor2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 2."
::= { switch 12 }
hwTemperatureSensor3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 3."
::= { switch 13 }
hwFan1RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 1 RPM value."
::= { switch 14 }
hwFan2RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 2 RPM value."
::= { switch 15 }
hwFan3RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 3 RPM value."
::= { switch 16 }
hwFan4RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 4 RPM value."
::= { switch 17 }
hwBoardRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Board revision number."
::= { switch 18 }
hwPLDFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PLD Firmware version."
::= { switch 19 }
hwPowerSupply1State OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Power Supply 1 state."
::= { switch 20 }
hwPowerSupply2State OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Power Supply 2 state."
::= { switch 21 }
sfpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of external port SFP information."
::= { switch 22 }
sfpInfoTableEntry OBJECT-TYPE
SYNTAX SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the external port SFP information table."
INDEX { sfpInfoIndx }
::= { sfpInfoTable 1 }
SfpInfoTableEntry ::= SEQUENCE {
sfpInfoIndx Integer32,
sfpInfoDescription INTEGER,
sfpInfoSerialNumber DisplayString,
sfpInfoPartNumber DisplayString,
sfpInfoHWRevision DisplayString,
sfpInfoPresent INTEGER,
sfpInfoApproved INTEGER,
sfpInfoVendor DisplayString,
sfpInfoLaser DisplayString,
sfpInfoDate DisplayString,
sfpInfoTemperature DisplayString,
sfpInfoVoltage DisplayString
}
sfpInfoIndx OBJECT-TYPE
SYNTAX Integer32 (1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sfp Info index (45,46,47,48,49,50,51,52)"
::= { sfpInfoTableEntry 1 }
sfpInfoDescription OBJECT-TYPE
SYNTAX INTEGER {
none(0),
sfp(1),
cx4(2),
sfpplus(3),
dac(6),
sfpcopper(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3))"
::= { sfpInfoTableEntry 2 }
sfpInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number."
::= { sfpInfoTableEntry 3 }
sfpInfoPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number."
::= { sfpInfoTableEntry 4 }
sfpInfoHWRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware Revision"
::= { sfpInfoTableEntry 5 }
sfpInfoPresent OBJECT-TYPE
SYNTAX INTEGER {
present(1),
notpresent(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes whether actual SFP/SFP+ transceiver installation is present or not "
::= { sfpInfoTableEntry 6 }
sfpInfoApproved OBJECT-TYPE
SYNTAX INTEGER {
accepted(2),
approved(1),
notapproved(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes whether transceiver is an approved, accepted or unsupported device"
::= { sfpInfoTableEntry 7 }
sfpInfoVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor Name"
::= { sfpInfoTableEntry 8 }
sfpInfoLaser OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wave Length"
::= { sfpInfoTableEntry 9 }
sfpInfoDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Manufacturing Date"
::= { sfpInfoTableEntry 10 }
sfpInfoTemperature OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature"
::= { sfpInfoTableEntry 11 }
sfpInfoVoltage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voltage"
::= { sfpInfoTableEntry 12 }
swImage1Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software image1 version"
::= { switch 24 }
swImage2Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software image2 version"
::= { switch 25 }
swBootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software boot version"
::= { switch 26 }
-- SNMP_SERVER Objects
-- hwTemperatureSensor1WarningThreshhold OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..128))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The temperature sensor 1 Warning Threshhold."
-- ::= { switch 27 }
--
-- hwTemperatureSensor1RecoverThreshhold OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..128))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The temperature sensor 1 Recover Threshhold."
-- ::= { switch 28 }
--
-- hwTemperatureSensor2WarningThreshhold OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..128))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The temperature sensor 2 Warning Threshhold."
-- ::= { switch 29 }
--
-- hwTemperatureSensor2RecoverThreshhold OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..128))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The temperature sensor 2 Recover Threshhold."
-- ::= { switch 30 }
--
-- hwTemperatureSensor3WarningThreshhold OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..128))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The temperature sensor 3 Warning Threshhold."
-- ::= { switch 31 }
--
-- hwTemperatureSensor3RecoverThreshhold OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..128))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The temperature sensor 3 Recover Threshhold."
-- ::= { switch 32 }
hwFan5RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 5 RPM value."
::= { switch 33 }
hwFan6RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 6 RPM value."
::= { switch 34 }
hwTemperatureSensorWarningThreshhold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor Warning Threshhold."
::= { switch 35 }
hwTemperatureSensorRecoverThreshhold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor Recover Threshhold."
::= { switch 36}
snmpCfgServerVersion OBJECT-TYPE
SYNTAX INTEGER {
v1v2v3(1),
v3only(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable the access to SNMP versions 1,2,3 or 3 only."
::= { snmp 1 }
snmpCfgTrapSrcIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP trap source interface number."
::= { snmp 2 }
bosSwTempExceedThreshold NOTIFICATION-TYPE
OBJECTS {
hwTemperatureSensor1,
hwTemperatureSensor2,
hwTemperatureSensor3,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"A bosSwTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits."
::= { bosSnmpTraps 1 }
bosSwFanFailure NOTIFICATION-TYPE
OBJECTS {
hwFan1RPMValue,
hwFan2RPMValue,
hwFan3RPMValue,
hwFan4RPMValue,
hwFan5RPMValue,
hwFan6RPMValue,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"A bosSwFanFailure trap signifies that a fan failure has occured."
::= { bosSnmpTraps 2 }
bosSwPowerSupplyFailure NOTIFICATION-TYPE
OBJECTS {
hwPowerSupply1State,
hwPowerSupply2State,
bntSwTrapDisplayString
}
STATUS current
DESCRIPTION
"A bosSwPowerSupplyFailure trap signifies that the
power supply failed."
::= { bosSnmpTraps 3 }
-- Similar to ifAvailableIndex
agPortTableMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration host table."
::= { dataCollection 1 }
agImageForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2"
::= { dataCollection 2 }
-- Similar to swImage1Version
agImage1Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { dataCollection 3 }
-- Similar to swImage2Version
agImage2Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { dataCollection 4 }
hwSwitchSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch software version."
::= { dataCollection 5 }
-- Similar to hwSerialNumber
hwSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch serial number."
::= { dataCollection 6 }
-- Already addedd with different data type.
--hwLastBoot OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..48))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Time and reason of the last boot."
-- ::= { bosbhm 7}
hwManufacturingDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of manufacturing."
::= { dataCollection 7 }
-- Similar to issRestart
agReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reboot the agent.
other(1) is returned always when read."
::= { dataCollection 8 }
-- Similar to swBootVersion
agBootVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available."
::= { dataCollection 9 }
--Similar to bosConfigRestoreOption
agConfigForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
active(2),
backup(3),
default(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block"
::= { dataCollection 10 }
agSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available."
::= { dataCollection 11 }
agImage1DownloadDateAndTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when Image1 was downloaded"
::= { dataCollection 12 }
agImage2DownloadDateAndTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when Image2 was downloaded"
::= { dataCollection 13 }
-- Similar to bosConfigSaveOption
agSaveConfiguration OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
saveActive(2),
notSaveActive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read."
::= { generalConfiguration 1 }
-- Similar to issHttpPort
agNewCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the new_configuration block."
::= { generalConfiguration 2 }
-- Similar to issTelnetPort
agNewCfgTelnetServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the telnet server listens for telnet
sessions."
::= { generalConfiguration 3 }
agNewCfgTftpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the TFTP server is
listening to
in the new_configuration block."
::= { generalConfiguration 4 }
--bosDlUlImageFromIp
--bosUploadLogFileToIp
--bosConfigRestoreIpAddr
agTftpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server IP address or domain name."
::= { imageConfigTransfer 1 }
-- Similar to bosAgImageType
agTftpImage OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3),
boot(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the image file should be loaded in image1 or image2 in flash."
::= { imageConfigTransfer 2 }
-- Similar to bosDlUlImageName
agTftpImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The image file name to be downloaded."
::= { imageConfigTransfer 3 }
--Similar to bosConfigSaveFileName
agTftpCfgFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration file name."
::= { imageConfigTransfer 4 }
--bosImageAction
--bosConfigSaveOption
agTftpAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
imgget(2),
cfgput(4),
dumpput(5),
imgput(7),
tsdumpput(8),
bkcfgget(10),
bkcfgput(11),
accfgget(12),
accfgput(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to perform various TFTP Get or Put functions.
The TFTP sever is specified in agTftpServer object.
img-get(2) - Download switch image from a specified image
file (agTftpImageFileName) on the TFTP server to
the destinated storage (agTftpImage).
cfg-put(4) - Upload switch configuration to a specified
file (agTftpCfgFileName) on the TFTP server.
dump-put(5) - Download switch core dump to a specified
file (agTftpDumpFileName) on the TFTP server.
img-put(7) - Upload specified switch image to a specified image
file (agTftpImageFileName) on the TFTP server.
tsdump-put(8) - Download switch tech support dump to a specified
file (agTftpTSDumpFileName) on the TFTP server.
bkcfg-get(10) - Download switch backup configuration from a specified
file (agTftpBkCfgFileName) on the TFTP server.
bkcfg-put(11) - Upload switch backup configuration to a specified
file (agTftpBkCfgFileName) on the TFTP server.
accfg-get(12) - Download switch active configuration from a specified
file (agTftpAcCfgFileName) on the TFTP server.
accfg-put(13) - Upload switch active configuration to a specified
file (agTftpAcCfgFileName) on the TFTP server.
other(1) is returned always when read."
::= { imageConfigTransfer 5 }
--bosRemoteSaveStatus
--bosDownloadStatus
agTftpLastActionStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The recorded status of the previous TFTP activity."
::= { imageConfigTransfer 6 }
-- Port information table
portInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port information."
::= { portInformation 1 }
portInfoTableEntry OBJECT-TYPE
SYNTAX PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port information table."
INDEX { portInfoIndx }
::= { portInfoTable 1 }
PortInfoTableEntry ::= SEQUENCE {
portInfoIndx Integer32,
portInfoSpeed INTEGER,
portInfoMode INTEGER,
portInfoFlowCtrl INTEGER,
portInfoLink INTEGER,
agPortNewCfgVlanTag INTEGER,
agPortNewCfgTagPVID INTEGER,
agPortNewCfgPVID Integer32,
agPortNewCfgPortName DisplayString
}
portInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portInfoTableEntry 1 }
portInfoSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
mbs1000(4),
any(5),
mbs10000(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current operational speed of the port."
::= { portInfoTableEntry 2 }
portInfoMode OBJECT-TYPE
SYNTAX INTEGER {
fullduplex(2),
halfduplex(3),
any(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current operational mode of the port."
::= { portInfoTableEntry 3 }
portInfoFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current operational flow control of the port."
::= { portInfoTableEntry 4 }
portInfoLink OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3),
inoperative(4) -- unrecognized PCI device
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational link status of the port."
::= { portInfoTableEntry 5 }
agPortNewCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
tagged(1),
untagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is VLAN tag state of the port"
::= { portInfoTableEntry 6 }
agPortNewCfgTagPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is PVID tag state of the port"
::= { portInfoTableEntry 7 }
agPortNewCfgPVID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default VLAN ID for the port."
::= { portInfoTableEntry 8 }
agPortNewCfgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch port name."
::= { portInfoTableEntry 9 }
--AccessUser Table Start
agAccessUserCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAccessUserCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Access user configuration."
::= { bosAccessUser 1 }
agAccessUserCfgTableEntry OBJECT-TYPE
SYNTAX AgAccessUserCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Access user configuration table."
INDEX { agAccessUserCfgUId }
::= { agAccessUserCfgTable 1 }
AgAccessUserCfgTableEntry ::= SEQUENCE {
agAccessUserCfgUId Integer32,
agAccessUserCos INTEGER,
agAccessUserCfgName DisplayString,
agAccessUserCfgPswd DisplayString,
agAccessUserCfgState INTEGER,
agAccessUserCfgDelete INTEGER
}
agAccessUserCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User identifier."
::= { agAccessUserCfgTableEntry 1 }
agAccessUserCos OBJECT-TYPE
SYNTAX INTEGER {
user(1),
oper(6),
admin(15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user class of service."
::= { agAccessUserCfgTableEntry 2 }
agAccessUserCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user name."
::= { agAccessUserCfgTableEntry 3 }
agAccessUserCfgPswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The character string representing the user password."
::= { agAccessUserCfgTableEntry 4 }
agAccessUserCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a user."
::= { agAccessUserCfgTableEntry 5 }
agAccessUserCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User"
::= { agAccessUserCfgTableEntry 6 }
--AccessUser Table Stop
-- ISS related objects ---------
agNewCfgMgmtNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management network - corresponding to the mnet command of
the system menu."
::= { mgmtintf 1 }
agNewCfgMgmtMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management subnet mask - corresponding to the mmask command
of the system configuration menu."
::= { mgmtintf 2 }
bosoobGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default gateway configured over OOB management interface"
::= { mgmtintf 3}
oobIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP Address of the system. "
::= { mgmtintf 4}
oobIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP subnet mask for the oob IP address."
::= { mgmtintf 5 }
bosOOBGatewayStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables Management Gateway of the System"
::= { mgmtintf 6 }
bosDefaultIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables Management OOB Interface of the System"
::= { mgmtintf 7 }
bosDefaultIpAddrCfgMode OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism to be used for allocation of IP
configuration parameter i.e address, mask, gateway etc for default OOB interface.
The dynamic(2) option takes an IP
configuration dynamically from the DHCP server.
If the method specified is manual (1) and IP configuration parameters for
the Default OOB interface is provided
by the administrator.."
DEFVAL { dynamic}
::= { mgmtintf 8 }
----------------------------------------------------------------------------
-- } INSERT: g8124
-- ----------------------------------------------------------------------------
bossnoop OBJECT IDENTIFIER ::= { ex2500 105 }
-- ----------------------------------------------------------------------------
-- { INSERT: snoop
-- ----------------------------------------------------------------------------
-- ------------------------------------------------------------
-- groups in the MIB
-- ------------------------------------------------------------
bosSnoopSystem OBJECT IDENTIFIER ::= { bossnoop 1 }
bosSnoopInst OBJECT IDENTIFIER ::= { bossnoop 2 }
bosSnoopVlan OBJECT IDENTIFIER ::= { bossnoop 3 }
bosSnoopStats OBJECT IDENTIFIER ::= { bossnoop 4 }
-- ------------------------------------------------------------------
-- The SNOOP Instance Group
-- ------------------------------------------------------------------
-- Instance Based Global Configuration Table
bosSnoopInstanceGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopInstanceGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains multicast forwarding mode configuration
for each instance running in the snooping switch"
::= { bosSnoopInst 1 }
bosSnoopInstanceGlobalEntry OBJECT-TYPE
SYNTAX BosSnoopInstanceGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains instance number and the multicast
forwarding mode configuration for the particular instance"
INDEX { bosSnoopInstanceGlobalInstId }
::= { bosSnoopInstanceGlobalTable 1 }
BosSnoopInstanceGlobalEntry ::= SEQUENCE {
bosSnoopInstanceGlobalInstId Integer32
}
bosSnoopInstanceGlobalInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the global configuration entry."
::= { bosSnoopInstanceGlobalEntry 1 }
bosSnoopInstanceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopInstanceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains global configuration of snooping for each
instance running in switch"
::= { bosSnoopInst 2 }
bosSnoopInstanceConfigEntry OBJECT-TYPE
SYNTAX BosSnoopInstanceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains instance number, address type and the list of global
configuration for the particular instance and address type"
INDEX { bosSnoopInstanceConfigInstId,
bosSnoopInetAddressType }
::= { bosSnoopInstanceConfigTable 1 }
BosSnoopInstanceConfigEntry ::= SEQUENCE {
bosSnoopInstanceConfigInstId Integer32,
bosSnoopInetAddressType InetAddressType,
bosSnoopStatus INTEGER,
bosSnoopRouterPortPurgeInterval Integer32,
bosSnoopPortPurgeInterval Integer32,
bosSnoopGrpQueryInterval Integer32,
bosSnoopOperStatus INTEGER
}
bosSnoopInstanceConfigInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the global configuration entry.
Currently only one instance is supported so it is always 1"
::= { bosSnoopInstanceConfigEntry 1 }
bosSnoopInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Inet Address Type corresponding to the global configuration entry.
This indicates whether the row is for IGMP/MLD Snooping"
::= { bosSnoopInstanceConfigEntry 2 }
bosSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP/MLD snooping in the system.
When set to 'enabled', the IGS/MLDS module starts
protocol operations.
When set to 'disabled', the IGS/MLDS module stops performing
protocol operations."
DEFVAL { 2 }
::= { bosSnoopInstanceConfigEntry 3 }
bosSnoopRouterPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted."
DEFVAL { 255 }
::= { bosSnoopInstanceConfigEntry 4 }
bosSnoopPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (130..1225)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group."
DEFVAL {260}
::= { bosSnoopInstanceConfigEntry 5 }
bosSnoopGrpQueryInterval OBJECT-TYPE
SYNTAX Integer32 (2..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there are any intersted receivers. The switch will send
'bosSnoopRetryCount' queries before removing the port from the
group membership information in the forwarding database."
DEFVAL { 2 }
::= { bosSnoopInstanceConfigEntry 6 }
bosSnoopOperStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the IGS/MLDS protocol.
The value enabled(1) indicates the IGS/MLDS module is currently
enabled in the system.
The value disable(1) indicates the IGS/MLDS module is currently
disabled in the system."
::= { bosSnoopInstanceConfigEntry 7 }
-- ------------------------------------------------------------------
-- The Snoop VLAN Group
-- ------------------------------------------------------------------
-- VLAN Based IP Multicast Forwarding Table
bosSnoopVlanMcastIpFwdTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopVlanMcastIpFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IP based multicast forwarding
information. This information is applicable only if
the 'bosSnoopInstMcastForwardingMode' is set to 'ip-based' "
::= { bosSnoopVlan 1 }
bosSnoopVlanMcastIpFwdEntry OBJECT-TYPE
SYNTAX BosSnoopVlanMcastIpFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded."
INDEX { bosSnoopVlanMcastIpFwdInstId,
bosSnoopVlanMcastIpFwdVlanId,
bosSnoopVlanMcastIpFwdAddressType,
bosSnoopVlanMcastIpFwdSourceAddress,
bosSnoopVlanMcastIpFwdGroupAddress }
::= { bosSnoopVlanMcastIpFwdTable 1 }
BosSnoopVlanMcastIpFwdEntry ::= SEQUENCE {
bosSnoopVlanMcastIpFwdInstId Integer32,
bosSnoopVlanMcastIpFwdVlanId Integer32,
bosSnoopVlanMcastIpFwdAddressType InetAddressType,
bosSnoopVlanMcastIpFwdSourceAddress InetAddress,
bosSnoopVlanMcastIpFwdGroupAddress InetAddress,
bosSnoopVlanMcastIpFwdPortList PortList
}
bosSnoopVlanMcastIpFwdInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the Multicast forwarding entry.
Currently only one instance is supported so it is always 1"
::= { bosSnoopVlanMcastIpFwdEntry 1 }
bosSnoopVlanMcastIpFwdVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { bosSnoopVlanMcastIpFwdEntry 2 }
bosSnoopVlanMcastIpFwdAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"InetAddressType pertaining to the Multicast forwarding entry"
::= { bosSnoopVlanMcastIpFwdEntry 3 }
bosSnoopVlanMcastIpFwdSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unicast source address of the data source that sends
multicast data for this group"
::= { bosSnoopVlanMcastIpFwdEntry 4 }
bosSnoopVlanMcastIpFwdGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP/IPv6 multicast group address"
::= { bosSnoopVlanMcastIpFwdEntry 5 }
bosSnoopVlanMcastIpFwdPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this source and group will be forwarded."
::= { bosSnoopVlanMcastIpFwdEntry 6 }
-- VLAN based router table.
bosSnoopVlanRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { bosSnoopVlan 2 }
bosSnoopVlanRouterEntry OBJECT-TYPE
SYNTAX BosSnoopVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the VLAN ID and list of ports on which
routers are present in the VLAN."
INDEX { bosSnoopVlanRouterInstId,
bosSnoopVlanRouterVlanId,
bosSnoopVlanRouterInetAddressType }
::= { bosSnoopVlanRouterTable 1 }
BosSnoopVlanRouterEntry ::= SEQUENCE {
bosSnoopVlanRouterInstId Integer32,
bosSnoopVlanRouterVlanId Integer32,
bosSnoopVlanRouterInetAddressType InetAddressType,
bosSnoopVlanRouterPortList PortList
}
bosSnoopVlanRouterInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining to the router port entry.
Currently only one instance is supported so it is always 1"
::= { bosSnoopVlanRouterEntry 1 }
bosSnoopVlanRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN ID of the ports through which router is reachable."
::= { bosSnoopVlanRouterEntry 2 }
bosSnoopVlanRouterInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It indicates whether the row belongs to IGMP / MLD snooping."
::= { bosSnoopVlanRouterEntry 3 }
bosSnoopVlanRouterPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { bosSnoopVlanRouterEntry 4 }
-- VLAN based filter table
bosSnoopVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { bosSnoopVlan 3 }
bosSnoopVlanFilterEntry OBJECT-TYPE
SYNTAX BosSnoopVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { bosSnoopVlanFilterInstId,
bosSnoopVlanFilterVlanId,
bosSnoopVlanFilterInetAddressType }
::= { bosSnoopVlanFilterTable 1 }
BosSnoopVlanFilterEntry ::= SEQUENCE {
bosSnoopVlanFilterInstId Integer32,
bosSnoopVlanFilterVlanId Integer32,
bosSnoopVlanFilterInetAddressType InetAddressType,
bosSnoopVlanSnoopStatus INTEGER,
bosSnoopVlanOperatingVersion INTEGER,
bosSnoopVlanCfgOperVersion INTEGER,
bosSnoopVlanFastLeave INTEGER,
bosSnoopVlanRtrPortList PortList,
bosSnoopVlanRowStatus RowStatus,
bosSnoopVlanQuerier INTEGER,
bosSnoopVlanCfgQuerier INTEGER,
bosSnoopVlanQueryInterval Integer32,
bosSnoopVlanSrcIp IpAddress,
bosSnoopVlanElectionType INTEGER,
bosSnoopVlanRobustness Unsigned32,
bosSnoopVlanStartupQueryCount Unsigned32,
bosSnoopVlanStartupQueryInterval Unsigned32,
bosSnoopVlanQueryMaxResponseTime Integer32,
bosSnoopVlanLastMemberQueryCount Integer32,
bosSnoopVlanSystemMac MacAddress,
bosSnoopVlanOtherQuerierAddress DisplayString,
bosSnoopVlanOtherQuerierPresentInterval DisplayString,
bosSnoopVlanOlderVersionPresentInterval DisplayString
}
bosSnoopVlanFilterInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Instance ID pertaining to VLAN filter table entry.
Currently only one instance is supported so it is always 1"
::= { bosSnoopVlanFilterEntry 1 }
bosSnoopVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" VLAN ID for which snooping configuration is to be done."
::= { bosSnoopVlanFilterEntry 2 }
bosSnoopVlanFilterInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates whether the row belongs to IGS/MLD snooping"
::= { bosSnoopVlanFilterEntry 3 }
bosSnoopVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGS/MLDS on that specific VLAN"
DEFVAL { 1 }
::= { bosSnoopVlanFilterEntry 4 }
bosSnoopVlanOperatingVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2)"
DEFVAL { 3 }
::= { bosSnoopVlanFilterEntry 5 }
bosSnoopVlanCfgOperVersion OBJECT-TYPE
SYNTAX INTEGER { v1(1), v2(2), v3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e., V2(2).
The 'bosSnoopVlanCfgOperVersion' should be configured on the
basis of the router version present in the VLAN."
DEFVAL { 3 }
::= { bosSnoopVlanFilterEntry 6 }
bosSnoopVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { 2 }
::= { bosSnoopVlanFilterEntry 7 }
bosSnoopVlanRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports"
::= { bosSnoopVlanFilterEntry 8 }
bosSnoopVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a row in the VLAN filter table. By
'bosSnoopVlanRowStatus' new entries can be created in the VLAN
filter table and the existing entries can be removed from the
VLAN filter table"
::= { bosSnoopVlanFilterEntry 9 }
bosSnoopVlanQuerier OBJECT-TYPE
SYNTAX INTEGER { querier(1), nonquerier(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any other querier in the VLAN, It will move to non querier
state."
::= { bosSnoopVlanFilterEntry 10 }
bosSnoopVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP queries.
when querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other querier with lower IP/MAC in the VLAN.
To update current vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state."
DEFVAL { 2 }
::= { bosSnoopVlanFilterEntry 11 }
bosSnoopVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..608)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. To update current vlaue set bosSnoopVlanRowStatus to
NOT_IN_SERVICE state."
DEFVAL { 125 }
::= { bosSnoopVlanFilterEntry 12 }
bosSnoopVlanSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch. To update current vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state."
::= { bosSnoopVlanFilterEntry 13 }
bosSnoopVlanElectionType OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), macadd(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.
To update current vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state."
DEFVAL { 1 }
::= { bosSnoopVlanFilterEntry 14 }
bosSnoopVlanRobustness OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the Other
Querier Present Interval. To update current vlaue set bosSnoopVlanRowStatus
to NOT_IN_SERVICE state."
DEFVAL {2}
::= { bosSnoopVlanFilterEntry 15 }
bosSnoopVlanStartupQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval. To update current
vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state."
DEFVAL {2}
::= { bosSnoopVlanFilterEntry 16 }
bosSnoopVlanStartupQueryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
To update current vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state."
DEFVAL {31}
::= { bosSnoopVlanFilterEntry 17 }
bosSnoopVlanQueryMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (1..256)
UNITS "tenths of seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response interval advertised in
IGMP queries on this VLAN. To update current vlaue set bosSnoopVlanRowStatus
to NOT_IN_SERVICE state."
DEFVAL { 100 }
::= { bosSnoopVlanFilterEntry 18 }
bosSnoopVlanLastMemberQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Last Member Query Count is the number of Group-Specific Queries
sent before the switch assumes there are no local members. To update
current vlaue set bosSnoopVlanRowStatus to NOT_IN_SERVICE state."
DEFVAL {2}
::= { bosSnoopVlanFilterEntry 19 }
bosSnoopVlanSystemMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Source MAC Address of the switch, which is used in Querier election,
when bosSnoopVlanQuerierType is selected as macadd on this vlan."
::= { bosSnoopVlanFilterEntry 20 }
bosSnoopVlanOtherQuerierAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan."
::= { bosSnoopVlanFilterEntry 21 }
bosSnoopVlanOtherQuerierPresentInterval OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) times (the Query Interval)) plus
(one half of one Query Response Interval)."
::= { bosSnoopVlanFilterEntry 22 }
bosSnoopVlanOlderVersionPresentInterval OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times
(the Query Interval)) plus (one Query Response Interval)."
::= { bosSnoopVlanFilterEntry 23 }
-- Snooping Statistics
bosSnoopStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BosSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains snooping statistics
maintained by the switch. The statistics are
maintained on a per VLAN basis."
::= { bosSnoopStats 1 }
bosSnoopStatsEntry OBJECT-TYPE
SYNTAX BosSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping statistics for a particular VLAN."
INDEX { bosSnoopStatsInstId,
bosSnoopStatsVlanId,
bosSnoopStatsInetAddressType }
::= { bosSnoopStatsTable 1 }
BosSnoopStatsEntry ::= SEQUENCE {
bosSnoopStatsInstId Integer32,
bosSnoopStatsVlanId Integer32,
bosSnoopStatsInetAddressType InetAddressType,
bosSnoopStatsRxGenQueries Counter32,
bosSnoopStatsRxGrpQueries Counter32,
bosSnoopStatsRxGrpAndSrcQueries Counter32,
bosSnoopStatsRxAsmReports Counter32,
bosSnoopStatsRxSsmReports Counter32,
bosSnoopStatsRxSsmIsInMsgs Counter32,
bosSnoopStatsRxSsmIsExMsgs Counter32,
bosSnoopStatsRxSsmToInMsgs Counter32,
bosSnoopStatsRxSsmToExMsgs Counter32,
bosSnoopStatsRxSsmAllowMsgs Counter32,
bosSnoopStatsRxSsmBlockMsgs Counter32,
bosSnoopStatsRxAsmLeaves Counter32,
bosSnoopStatsTxGenQueries Counter32,
bosSnoopStatsTxGrpQueries Counter32,
bosSnoopStatsTxAsmReports Counter32,
bosSnoopStatsTxSsmReports Counter32,
bosSnoopStatsTxAsmLeaves Counter32,
bosSnoopStatsDroppedPkts Counter32,
bosSnoopStatsValidPkts Counter32
}
bosSnoopStatsInstId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance ID pertaining for the statistics entry.
Currently only one instance is supported so it is always 1"
::= { bosSnoopStatsEntry 1 }
bosSnoopStatsVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" VLAN ID for which snooping statistics are displayed"
::= { bosSnoopStatsEntry 2 }
bosSnoopStatsInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Indicates whether the statistics are for IGS/MLDS"
::= { bosSnoopStatsEntry 3 }
bosSnoopStatsRxGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of General Queries received by the
snooping switch."
::= { bosSnoopStatsEntry 4 }
bosSnoopStatsRxGrpQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of Group Specific Queries received
by the snooping switch."
::= { bosSnoopStatsEntry 5 }
bosSnoopStatsRxGrpAndSrcQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of Group and Source Specific Queries
received by the snooping switch."
::= { bosSnoopStatsEntry 6 }
bosSnoopStatsRxAsmReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv1/IGMPv2 Membership reports
received by the snooping switch. In case of MLDS, it provides
the statistics of MLDv1 membership reports."
::= { bosSnoopStatsEntry 7 }
bosSnoopStatsRxSsmReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
received by the snooping switch."
::= { bosSnoopStatsEntry 8 }
bosSnoopStatsRxSsmIsInMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
of type IS_IN received by the snooping switch."
::= { bosSnoopStatsEntry 9 }
bosSnoopStatsRxSsmIsExMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
of type IS_EX received by the snooping switch."
::= { bosSnoopStatsEntry 10 }
bosSnoopStatsRxSsmToInMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
of type TO_IN received by the snooping switch."
::= { bosSnoopStatsEntry 11 }
bosSnoopStatsRxSsmToExMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
of type TO_EX received by the snooping switch."
::= { bosSnoopStatsEntry 12 }
bosSnoopStatsRxSsmAllowMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
of type ALLOW received by the snooping switch."
::= { bosSnoopStatsEntry 13 }
bosSnoopStatsRxSsmBlockMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
of type BLOCK received by the snooping switch."
::= { bosSnoopStatsEntry 14 }
bosSnoopStatsRxAsmLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv2/MLDv1 Leave messages
received by the snooping switch."
::= { bosSnoopStatsEntry 15 }
bosSnoopStatsTxGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of General Queries transmitted by the
snooping switch when it is act as a querier."
::= { bosSnoopStatsEntry 16 }
bosSnoopStatsTxGrpQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of Group Specific Queries transmitted
by the snooping switch."
::= { bosSnoopStatsEntry 17 }
bosSnoopStatsTxAsmReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv1/IGMPv2 Membership reports
transmitted by the snooping switch."
::= { bosSnoopStatsEntry 18 }
bosSnoopStatsTxSsmReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv3/MLDv2 Membership reports
transmitted by the snooping switch."
::= { bosSnoopStatsEntry 19 }
bosSnoopStatsTxAsmLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the statistics of IGMPv2/MLDv1 Leave messages
transmitted by the snooping switch."
::= { bosSnoopStatsEntry 20 }
bosSnoopStatsDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the number of erroneous IGMP/MLD packets dropped
by the snooping switch due to packet error."
::= { bosSnoopStatsEntry 21 }
-- Added for BNT -----
bosSnoopStatsValidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the number of valid IGMP/MLD packets processed
by the snooping switch"
::= { bosSnoopStatsEntry 22 }
-- ----------------------------------------------------------------------------
-- } INSERT: snoop
-- ----------------------------------------------------------------------------
bosarp OBJECT IDENTIFIER ::= { ex2500 109 }
-- ----------------------------------------------------------------------------
-- { INSERT: arp
-- ----------------------------------------------------------------------------
arp OBJECT IDENTIFIER ::= { bosarp 1 }
-- ARP Group
-- This group defines objects for ARP.
bosArpCacheTimeout OBJECT-TYPE
SYNTAX Integer32 (2..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Time after which the entry in cache is deleted "
DEFVAL { 5 }
::= { arp 1 }
bosArpCachePendTime OBJECT-TYPE
SYNTAX Integer32 (30..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Time for which an unresolved entry will be
held until response is received "
DEFVAL { 30 }
::= { arp 2 }
bosArpMaxRetries OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Maximum number of retry attempts before aborting
resolving "
DEFVAL { 3 }
::= { arp 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: arp
-- ----------------------------------------------------------------------------
bossnmp3 OBJECT IDENTIFIER ::= { ex2500 112 }
-- ----------------------------------------------------------------------------
-- { INSERT: snmp3
-- ----------------------------------------------------------------------------
-- SCALAR_TABLE_BEGIN
snmpInInformResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of SNMP Inform responses
received by the Agent from manager."
::= { bossnmp3 1 }
snmpOutInformRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of SNMP Inform requests
sent by the Agent to manager."
::= { bossnmp3 2 }
snmpInformDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of SNMP Inform messages
dropped by the Agent after retransmission."
::= { bossnmp3 3 }
snmpInformAwaitingAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of SNMP Inform messages for
which Acknowledgement is expected from
manager."
::= { bossnmp3 4 }
-- SCALAR_TABLE_STOP
-- the SNMP Statistics group
--
-- a collection of objects providing basic instrumentation and
-- control of INFORM Messages from an SNMP entity.
-- Inform Counters Table
-- Statistical information on INFORM PDUs generated by the Agent for
-- various Managers are registered in the inform counters table.
snmpInformCntTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpInformCntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SNMP Inform Counters Table is used to store the
statistics of the INFORM PDUs sent from the device."
::= { bossnmp3 5 }
snmpInformCntEntry OBJECT-TYPE
SYNTAX SnmpInformCntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one Manager entry with INFORM
Statistics."
INDEX { snmpInformTgtAddrName }
::= { snmpInformCntTable 1 }
SnmpInformCntEntry ::=
SEQUENCE {
snmpInformTgtAddrName
SnmpAdminString,
snmpInformSent
Counter32,
snmpInformAwaitAck
Counter32,
snmpInformRetried
Counter32,
snmpInformDropped
Counter32,
snmpInformFailed
Counter32,
snmpInformResponses
Counter32
}
snmpInformTgtAddrName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IpAddress corresponding to the Remote SNMP Entity
configured to receive INFORM notifications. The Index
corresponds to an entry in snmpTargetAddrTable"
::= { snmpInformCntEntry 1 }
snmpInformSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INFORM messages delivered from the
SNMP entity to the transport service."
::= { snmpInformCntEntry 2 }
snmpInformAwaitAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INFORM messages waiting to be
acknowledged by the remote SNMP Entity "
::= { snmpInformCntEntry 3 }
snmpInformRetried OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INFORM messages retransmitted to the
remote SNMP Entity from the SNMP entity"
::= { snmpInformCntEntry 4 }
snmpInformDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unacknowledged INFORM messages
discarded by the SNMP entity to make room for new INFORMs."
::= { snmpInformCntEntry 5 }
snmpInformFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INFORM messages failed to receive an
Acknowledgement from the remote SNMP entity."
::= { snmpInformCntEntry 6 }
snmpInformResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INFORM ACK messages received as
Acknowledgement from the remote SNMP entity."
::= { snmpInformCntEntry 7 }
-- ----------------------------------------------------------------------------
-- } INSERT: snmp3
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: bosRoot
-- ----------------------------------------------------------------------------
END
View Git Blame Copy Permalink