13704 lines
542 KiB
Plaintext
13704 lines
542 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (C) 2023 by HUAWEI TECHNOLOGIES. All rights reserved
|
|
--
|
|
-- Description: Network Quality Analyse MIB.
|
|
-- Reference:
|
|
-- Version: V3.10
|
|
-- History:
|
|
-- V1.0 liyonggang 2006.6.7,publish
|
|
-- V1.1
|
|
-- modified by liyonggang
|
|
-- =================================================================
|
|
|
|
NQA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress
|
|
FROM RFC1155-SMI
|
|
InterfaceIndexOrZero -- RFC2863
|
|
FROM IF-MIB
|
|
hwDatacomm
|
|
FROM HUAWEI-MIB
|
|
InetAddressType, InetAddress, InetPortNumber
|
|
FROM INET-ADDRESS-MIB
|
|
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TimeTicks, Integer32, Gauge32, Counter32, Unsigned32, OBJECT-TYPE,mib-2, NOTIFICATION-TYPE,
|
|
MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue, TimeStamp, RowStatus, TimeInterval, StorageType,MacAddress,
|
|
DateAndTime, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC2571
|
|
Dot1agCfmMepIdOrZero, Dot1agCfmMaintDomainName, Dot1agCfmMaintAssocName
|
|
FROM IEEE802171-CFM-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
VlanIdOrNone
|
|
FROM Q-BRIDGE-MIB -- [RFC4363]
|
|
HWDot1agCfmRelayActionFieldValue, HWDot1agCfmIngressActionFieldValue, HWDot1agCfmEgressActionFieldValue
|
|
FROM HUAWEI-ETHOAM-MIB;
|
|
|
|
|
|
nqa MODULE-IDENTITY
|
|
LAST-UPDATED "202302061059Z"
|
|
ORGANIZATION
|
|
"Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION
|
|
"Modify description at 2023-02-06."
|
|
REVISION "202302061059Z"
|
|
DESCRIPTION
|
|
"Modify description at 2023-01-09."
|
|
REVISION "202301091459Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-10-12."
|
|
REVISION "202210121459Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-08-28."
|
|
REVISION "202208281919Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-06-16."
|
|
REVISION "202206161919Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-06-08."
|
|
REVISION "202206081919Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-06-06."
|
|
REVISION "202206061919Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-05-18."
|
|
REVISION "202205181919Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-05-11."
|
|
REVISION "202205111919Z"
|
|
DESCRIPTION
|
|
"Modify description at 2022-05-04."
|
|
REVISION "202205041919Z"
|
|
DESCRIPTION
|
|
"Modify description at 2020-11-04."
|
|
REVISION "202011041919Z"
|
|
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaFlexAlgoId at 2020-10-14."
|
|
REVISION "202010141547Z"
|
|
DESCRIPTION
|
|
"Modify nqaAdminParaIcpifAdvFactor range at 2020-09-04."
|
|
REVISION "202009041109Z"
|
|
DESCRIPTION
|
|
"Modify English low-level mistakes at 2020-08-03."
|
|
REVISION "202008031109Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaSrPolicyBindingSid at 2020-6-24."
|
|
REVISION "202006240917Z"
|
|
DESCRIPTION
|
|
"Add mib table nqaLatestStatsTable at 2020-06-05."
|
|
REVISION "202006051135Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaSrPolicyBindingSid at 2020-4-22."
|
|
REVISION "202004220917Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaDscp at 2020-1-26."
|
|
REVISION "202001260917Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaSrPolicyEndPointAddrType, nqaAdminParaSrPolicyBindingSid , nqaAdminParaSrPolicyEndPointIpAddress, nqaAdminParaSrPolicyEndPointColor at 2019-4-22."
|
|
REVISION "201904221935Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaSrPolicyEndPointAddrType at 2019-4-22."
|
|
REVISION "201904221546Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaJitterLatestStatsMaxDelaySD at 2018-9-13."
|
|
REVISION "201902251546Z"
|
|
DESCRIPTION
|
|
"Modify mib node and nqaAdminParaSrPolicyBindingSid at 2019-01-16."
|
|
REVISION "201901161546Z"
|
|
DESCRIPTION
|
|
"Modify mib node and nqaAdminParaSrPolicyBindingSid at 2019-01-16."
|
|
REVISION "201812261514Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaMultiPathResultsSrPolicyPathType and nqaMultiPathResultsSrPolicyProtocol at 2018-12-26."
|
|
REVISION "201812071658Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaSrPolicyName, nqaAdminParaSrPolicyEndPointIpAddress, nqaAdminParaSrPolicyEndPointColor, nqaAdminParaSrPolicyBindingSid and mib table nqaMultiPathResultsTable, nqaMultiPathHistoryTable at 2018-12-7."
|
|
REVISION "201809131151Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaLspReplyMode OBJECT-TYPE, specifiedTunnelPath at 2018-8-22."
|
|
REVISION "201808221051Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaRmoteFecType, nqaAdminParaRmoteFecMask, nqaAdminParaRmoteFecIpAddress at 2018-7-30."
|
|
REVISION "201807301548Z"
|
|
DESCRIPTION
|
|
"Add mib table nqaJitterLatestStatsTable at 2018-7-28."
|
|
REVISION "201807281548Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaResultsTestResultChangePackedNotification in nqaNotificationsGroup NOTIFICATIONS at 2017-11-15."
|
|
REVISION "201711151548Z"
|
|
DESCRIPTION
|
|
"Modify description of mib node nqaAdminParaTable, nqaScheduleTable, nqaAdminParaExtTable, nqaUdpServerTable, nqaIcmpServerTable, nqaResultsTable, nqaJitterStatsTable, nqaReflectorTable at 2017-11-10."
|
|
REVISION "201711101616Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaEthPriorityStatus at 2017-06-19."
|
|
REVISION "201706191029Z"
|
|
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaEthPriorityStatus at 2017-06-14."
|
|
REVISION "201706141609Z"
|
|
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaFragment at 2017-03-27."
|
|
REVISION "201702272132Z"
|
|
|
|
DESCRIPTION
|
|
"Add mib node nqaResultsDetail, nqaJitterStatsResultDetail at 2017-02-20."
|
|
REVISION "201702202132Z"
|
|
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaPathType at 2015-09-16."
|
|
REVISION "201509161556Z"
|
|
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaLspPathType at 2015-07-17."
|
|
REVISION "201507171714Z"
|
|
|
|
DESCRIPTION
|
|
"Add description for mib node nqaAdminParaInterval at 2015-07-10."
|
|
REVISION "201507101011Z"
|
|
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaSoftwareBased,nqaRtpUdpServerSoftwareBased,nqaRtptestStatsMinDelaySD,nqaRtptestStatsMaxDelaySD,nqaRtptestStatsAvgDelaySD,
|
|
nqaRtptestStatsMinJitterSD,nqaRtptestStatsMaxJitterSD,nqaRtptestStatsAvgJitterSD,nqaRtptestStatsLossRateSD,nqaRtptestStatsIPDVSD at 2015-03-19."
|
|
REVISION "201503191711Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaTestFlowDstMacModifierType,nqaTestFlowDstMacModifierMask,nqaTestFlowDstMacModifierCount,nqaTestFlowDstMacModifierStep,nqaTestFlowSrcMacModifierType,
|
|
nqaTestFlowSrcMacModifierMask,nqaTestFlowSrcMacModifierCount,nqaTestFlowSrcMacModifierStep,nqaTestFlowDstIPModifierType,nqaTestFlowDstIPModifierMask,
|
|
nqaTestFlowDstIPModifierCount,nqaTestFlowDstIPModifierStep,nqaTestFlowSrcIPModifierType,nqaTestFlowSrcIPModifierMask,nqaTestFlowSrcIPModifierCount,
|
|
nqaTestFlowSrcIPModifierStep at 2015-01-19."
|
|
REVISION "201501191411Z"
|
|
|
|
|
|
DESCRIPTION
|
|
"Modify mib by ping address poor."
|
|
|
|
REVISION "201501141058Z"
|
|
|
|
DESCRIPTION
|
|
"HUAWEI service quality detect funcion."
|
|
|
|
REVISION "201501141058Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaLspTunnelType 2015-01-14."
|
|
|
|
REVISION "201501081701Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaResultsIndex, nqaResultsHopIndex and nqaJitterStatsIndex at 2015-01-08."
|
|
|
|
REVISION "201412191707Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaLspAddressType, and add mib node nqaAdminParaLspIPv4VpnType at 2014-11-17."
|
|
|
|
REVISION "201412121759Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaTestFlowBeginUdpDstPort,nqaTestFlowBeginUdpSrcPort,nqaEthernetServiceParaTestFlowId,nqaEthernetServiceParaPacketSizeValue, nqaEthernetServiceParaDisorderStatistics at 2014-12-12."
|
|
|
|
REVISION "201412081345Z"
|
|
DESCRIPTION
|
|
"HUAWEI service quality detect funcion."
|
|
|
|
REVISION "201411121345Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaResultsTestResultChange at 2014-11-12."
|
|
|
|
REVISION "201410301357Z"
|
|
DESCRIPTION
|
|
"Add some descriptions for mib node:nqaEthernetServiceStatsTestStep, nqaTestFlowDstIPAddrType,nqaTestFlowSrcIPAddrType,nqaTestFlowColorMode,nqaEthernetServiceStatsTestProcess,nqaEthernetServiceStatsTestStatus,
|
|
nqaEthernetServiceStatsFlowResult,nqaEthernetServiceStatsTestMode,nqaEthernetServiceStatsTestPhase,nqaEthernetServiceStatsFlowFLRPrecision,nqaEthernetServiceStatsFlowAvailPrecision,nqaReflectorDiscardPriority 2014-10-30."
|
|
|
|
REVISION "201410211114Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminParaCeEthType , nqaAdminParaPeEthType 2014-10-21."
|
|
|
|
REVISION "201409201357Z"
|
|
DESCRIPTION
|
|
"Add mib table nqaEthernetServiceParaTable, nqaEthernetServiceStatsTable, nqaTestFlowTable, mib node nqaReflectorEndTime, nqaReflectorExchangePort, nqaReflectorTestFlowId 2014-09-20."
|
|
|
|
REVISION "201409091526Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminParaSourceMacAddress, nqaAdminParaCeEthType, nqaAdminParaPeEthType, nqaAdminParaDirectionon, nqaReflectorDirection 2014-09-09."
|
|
|
|
REVISION "201406270930Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaJitterStatsStartTime, nqaJitterStatsEndTime on 2014-06-27."
|
|
|
|
REVISION "201406270930Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaJitterStatsStartTime, nqaJitterStatsEndTime on 2014-06-27."
|
|
|
|
REVISION "201405131606Z"
|
|
DESCRIPTION
|
|
"Modify mib node nqaAdminGeneralflowDiscardNonTest and its type, description etc. on 2014-05-13."
|
|
|
|
REVISION "201404221545Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaGeneralflowStatsCurrentRateCount, mib table nqaGeneralflowCurrentStatsTable, including mib node: nqaGeneralflowCurrentStatsRateIndex, nqaGeneralflowCurrentStatsThroughput and nqaGeneralflowCurrentStatsFrameLossRate on 2014-04-22."
|
|
|
|
REVISION "201404191612Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaAdminGeneralflowDiscardNonTest and nqaReflectorDiscardPriority on 2014-04-19."
|
|
|
|
REVISION "201404171656Z"
|
|
DESCRIPTION
|
|
"Modify desdription of those mib nodes nqaJitterStatsTestFailed nqaJitterStatsTestCompleted nqaJitterStatsRTDThresholdNotification nqaJitterStatsOWDThresholdNotificationSD and nqaJitterStatsOWDThresholdNotificationDS at 2014-04-17."
|
|
|
|
REVISION "201403132149Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaGeneralflowStatsFrameRate and nqaAdminParaFrameRate, modify nqaGeneralflowStatsActualTestTime to nqaGeneralflowStatsRealTestTime on 2014-03-13."
|
|
|
|
REVISION "201402241904Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaGeneralflowStatsEstimatedTestTime and nqaGeneralflowStatsActualTestTime on 2014-02-24."
|
|
|
|
REVISION "201402191653Z"
|
|
DESCRIPTION
|
|
"Modify processing(4) to running(4) of the nqaGeneralflowStatsCompletions node on 2014-02-19."
|
|
|
|
REVISION "201402141630Z"
|
|
DESCRIPTION
|
|
"Modify desdription of those mib nodes nqaGeneralflowStatsStartTime nqaGeneralflowStatsEndTime nqaGeneralflowStatsTestTotalTime nqaGeneralflowStatsTestRemainingTime and nqaGeneralflowStatsTestTime on 2014-02-14."
|
|
|
|
REVISION "201402080846Z"
|
|
DESCRIPTION
|
|
"Add mib nodes nqaGeneralflowStatsStartTime nqaGeneralflowStatsEndTime nqaGeneralflowStatsTestTotalTime nqaGeneralflowStatsTestRemainingTime and nqaGeneralflowStatsTestTime on 2014-02-08."
|
|
|
|
REVISION "201401281109Z"
|
|
DESCRIPTION
|
|
"Add mib node nqaGeneralflowStatsFrameLossRatePrecision and nqaGeneralflowStatsFrameLossRatePrecisionValue on 2014-01-28."
|
|
|
|
REVISION "201401131041Z"
|
|
DESCRIPTION
|
|
"Add value scope for nqaAdminParaFailRatioPrecision on 2014-01-13."
|
|
REVISION "201401091830Z"
|
|
DESCRIPTION
|
|
"Modify SYNTAX of hwClockCesAcrDomianInfoDomain on 2014-01-09."
|
|
REVISION "201312301008Z"
|
|
DESCRIPTION
|
|
"Modify value of nqaGeneralflowStatsCompletions on 2013-12-16."
|
|
|
|
|
|
::= { hwDatacomm 111 }
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
|
|
NqaType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select test type"
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
tcpConnect(1),
|
|
udpEcho(2),
|
|
httpAppl(3),
|
|
ftpAppl(4),
|
|
jitterAppl(5),
|
|
icmpAppl(6),
|
|
snmpAppl(7),
|
|
traceRoute(8),
|
|
lspPing(9),
|
|
lspTraceRoute(10),
|
|
dnsAppl(11),
|
|
dhcpAppl(12),
|
|
dlswAppl(13),
|
|
pwe3Ping(14),
|
|
pwe3Tracert(15),
|
|
mPing(16),
|
|
mTracert(17),
|
|
macPing(18),
|
|
macTunnelPing(19),
|
|
lspJitter(20),
|
|
pathMtu(21),
|
|
icmpJitter(22),
|
|
pathJitter(23),
|
|
pppoe(24),
|
|
vplsmPing(25),
|
|
vplsmacPing(26),
|
|
vplsmacTrace(27),
|
|
vplsMTrace(28),
|
|
gmacping(29),
|
|
gmactrace(30),
|
|
mactrace(31),
|
|
vplspwping(32),
|
|
vplspwtrace(33),
|
|
rtptest(36),
|
|
rtpsnoop(37),
|
|
generalflow(38),
|
|
ethernetService(39)
|
|
}
|
|
|
|
EnableValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents a boolean value."
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
|
|
|
|
NqaDistanceNodeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selection of destination addresses when MACPing is performed."
|
|
SYNTAX INTEGER
|
|
{
|
|
macAddress(1),
|
|
mepID(2)
|
|
}
|
|
|
|
HWLldpPortIdSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP interface ID sub type"
|
|
SYNTAX INTEGER
|
|
{
|
|
interfaceAlias(1),
|
|
portComponent(2),
|
|
macAddress(3),
|
|
networkAddress(4),
|
|
interfaceName(5),
|
|
agentCircuitId(6),
|
|
local(7)
|
|
}
|
|
|
|
HWLldpPortId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the format of a port identifier string.
|
|
Objects of this type are always used with an associated
|
|
LldpPortIdSubtype object, which identifies the format of the
|
|
particular LldpPortId object instance.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'interfaceAlias(1)', then the octet string identifies a
|
|
particular instance of the ifAlias object (defined in IETF
|
|
RFC 2863). If the particular ifAlias object does not contain
|
|
any values, another port identifier type should be used.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'portComponent(2)', then the octet string identifies a
|
|
particular instance of the entPhysicalAlias object (defined
|
|
in IETF RFC 2737) for a port or backplane component.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'macAddress(3)', then this string identifies a particular
|
|
unicast source address (encoded in network byte order
|
|
and IEEE 802.3 canonical bit order) associated with the port
|
|
(IEEE Std 802-2001).
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'networkAddress(4)', then this string identifies a network
|
|
address associated with the port. The first octet contains
|
|
the IANA AddressFamilyNumbers enumeration value for the
|
|
specific address type, and octets 2 through N contain the
|
|
networkAddress address value in network byte order.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'interfaceName(5)', then the octet string identifies a
|
|
particular instance of the ifName object (defined in IETF
|
|
RFC 2863). If the particular ifName object does not contain
|
|
any values, another port identifier type should be used.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'agentCircuitId(6)', then this string identifies a agent-local
|
|
identifier of the circuit (defined in RFC 3046).
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'local(7)', then this string identifies a locally
|
|
assigned port ID."
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
|
|
NqaOperation ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Paras for specified test."
|
|
SYNTAX INTEGER
|
|
{
|
|
noOperation(1),
|
|
httpGet(2),
|
|
httpPost(3),
|
|
ftpGet(4),
|
|
ftpPut(5)
|
|
}
|
|
|
|
ProtocolType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents a boolean value."
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
udp(1),
|
|
tcp(2)
|
|
}
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
nqaBase OBJECT IDENTIFIER ::= { nqa 1 }
|
|
|
|
nqaVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NQA version (for example, 1.1).
|
|
It can be used for version management."
|
|
::= { nqaBase 1 }
|
|
|
|
nqaEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the switch of enabling NQA client.
|
|
(The value range: enable:1; disable:2. The default value is enable(1))"
|
|
::= { nqaBase 2 }
|
|
|
|
nqaReset OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears all the enabled test configurations.
|
|
(The value range: enable:1; disable:2. The default value is disable(2))"
|
|
::= { nqaBase 3 }
|
|
|
|
nqaTimeOfLastSetError OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time of the last configuration error.
|
|
(0 indicates that the configuration does not fail)."
|
|
::= { nqaBase 4 }
|
|
|
|
nqaLastSetError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last configuration error.
|
|
(0 indicates that the configuration does not fail)."
|
|
::= { nqaBase 5 }
|
|
|
|
nqaNumOfCurrentCtrlEntry OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of current configuration tests."
|
|
::= { nqaBase 6 }
|
|
|
|
nqaMaxConcurrentRequests OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "requests"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent active requests
|
|
that are allowed within an agent implementation."
|
|
::= { nqaBase 7 }
|
|
|
|
nqaMaxNumOfRequests OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "requests"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of requests
|
|
that are allowed within an agent implementation. "
|
|
::= { nqaBase 8 }
|
|
|
|
nqaJitterVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Selects the version of jitter test.
|
|
(The value range: old version:1, new version:2. The default value is old version(1))"
|
|
::= { nqaBase 9 }
|
|
|
|
nqaSupportTestType OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
icmp(0),
|
|
tcp(1),
|
|
udp(2),
|
|
http(3),
|
|
ftp(4),
|
|
jitter(5),
|
|
snmp(6),
|
|
trace(7),
|
|
lspPing(8),
|
|
lspTrace(9),
|
|
dns(10),
|
|
dhcp(11),
|
|
dlsw(12),
|
|
pwe3Ping(13),
|
|
pwe3Trace(14),
|
|
mPing(15),
|
|
mTrace(16),
|
|
macPing(17),
|
|
macTunnelPing(18),
|
|
lspJitter(19),
|
|
icmpJitter(20),
|
|
pathJitter(21),
|
|
pathMtu(22),
|
|
pppoe(23),
|
|
vplsmPing(24),
|
|
vplsmacPing(25),
|
|
vplsmacTrace(26),
|
|
vplsMTrace(27),
|
|
gmacping(28),
|
|
gmactrace(29),
|
|
mactrace(30),
|
|
vplspwping(31),
|
|
vplspwtrace(32),
|
|
rtptest(36),
|
|
rtpsnoop(37),
|
|
generalflow(38),
|
|
ethernetService(39)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test type that the current device supports.
|
|
Data structure of the type is in the format of bits.
|
|
Each bit represents a test type.
|
|
The mappings between bits and tests are as follows:
|
|
icmp(0),
|
|
tcp(1),
|
|
udp(2),
|
|
http(3),
|
|
ftp(4),
|
|
jitter(5),
|
|
snmp(6),
|
|
trace(7),
|
|
lspPing(8),
|
|
lspTrace(9),
|
|
dns(10),
|
|
dhcp(11),
|
|
dlsw(12),
|
|
pwe3Ping(13),
|
|
pwe3Trace(14),
|
|
mPing(15),
|
|
mTrace(16),
|
|
macPing(17),
|
|
macTunnelPing(18),
|
|
lspJitter(19),
|
|
icmpJitter(20),
|
|
pathJitter(21),
|
|
pathMtu(22),
|
|
pppoe(23),
|
|
vplsmPing(24),
|
|
vplsmacPing(25),
|
|
vplsmacTrace(26),
|
|
vplsMTrace(27),
|
|
gmacping(28),
|
|
gmactrace(29),
|
|
mactrace(30),
|
|
vplspwping(31),
|
|
vplspwtrace(32),
|
|
rtptest(36),
|
|
rtpsnoop(37),
|
|
generalflow(38),
|
|
ethernetService(39)
|
|
The value #0x00 indicates don't support all testtypes."
|
|
::= { nqaBase 10}
|
|
nqaSupportServerType OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
tcpServer(0),
|
|
udpServer(1),
|
|
icmpServer(2),
|
|
rtpudpServer(3),
|
|
rtptcpServer(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test type that the current device supports.
|
|
Data structure of the type is in the format of bits.
|
|
Each bit represents a test type.
|
|
tcpServer(0),
|
|
udpServer(1),
|
|
icmpServer(2),
|
|
rtpudpServer(3),
|
|
rtptcpServer(4)
|
|
The value #0x00 indicates don't support all servertypes."
|
|
::= { nqaBase 11}
|
|
|
|
nqaRtptestMaxConcurrentNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent active rtptest requests that are allowed within an agent implementation."
|
|
::= { nqaBase 12 }
|
|
|
|
nqaRtpsnoopMaxConcurrentNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent active rtpsnoop requests that are allowed within an agent implementation."
|
|
::= { nqaBase 13 }
|
|
|
|
nqaRtpudpMaxConcurrentNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent active rtp-udp servers."
|
|
::= { nqaBase 14 }
|
|
|
|
nqaRtptcpMaxConcurrentNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent active rtp-tcp servers."
|
|
::= { nqaBase 15 }
|
|
|
|
|
|
nqaCtrl OBJECT IDENTIFIER ::= { nqa 2 }
|
|
|
|
nqaAdminCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaAdminCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of NQA monitoring definitions."
|
|
::= { nqaCtrl 1 }
|
|
|
|
nqaAdminCtrlEntry OBJECT-TYPE
|
|
SYNTAX NqaAdminCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the nqaAdminCtrlTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
|
|
::= { nqaAdminCtrlTable 1 }
|
|
|
|
NqaAdminCtrlEntry ::=
|
|
SEQUENCE {
|
|
nqaAdminCtrlOwnerIndex
|
|
SnmpAdminString,
|
|
nqaAdminCtrlTestName
|
|
SnmpAdminString,
|
|
nqaAdminCtrlTag
|
|
DisplayString,
|
|
nqaAdminCtrlType
|
|
NqaType,
|
|
nqaAdminCtrlFrequency
|
|
Integer32,
|
|
nqaAdminCtrlTimeOut
|
|
Integer32,
|
|
nqaAdminCtrlThreshold1
|
|
Integer32,
|
|
nqaAdminCtrlThreshold2
|
|
Integer32,
|
|
nqaAdminCtrlThreshold3
|
|
Integer32,
|
|
nqaAdminCtrlStatus
|
|
RowStatus,
|
|
nqaAdminCtrlJitterThresholdSD
|
|
Integer32,
|
|
nqaAdminCtrlJitterThresholdDS
|
|
Integer32
|
|
}
|
|
|
|
nqaAdminCtrlOwnerIndex OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To facilitate the provisioning of access control by a
|
|
security administrator using the View-Based Access
|
|
Control Model for tables in which multiple users may
|
|
need to independently create or modify entries,
|
|
the initial index is used as an 'ownerindex'.
|
|
|
|
When used in conjunction with such a security policy
|
|
all entries in the table belonging to a particular user
|
|
(or group) will have the same value for this initial
|
|
index. For a given user's entries in a particular
|
|
table, the object identifiers for the information in
|
|
these entries will have the same subidentifiers (except
|
|
for the 'column' subidentifier) up to the end of the
|
|
encoded owner index."
|
|
::= { nqaAdminCtrlEntry 1 }
|
|
|
|
nqaAdminCtrlTestName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a test. This is locally unique,
|
|
within the scope of an nqaAdminCtrlOwnerIndex."
|
|
::= { nqaAdminCtrlEntry 2 }
|
|
|
|
nqaAdminCtrlTag OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string which is the description of the test instance."
|
|
::= { nqaAdminCtrlEntry 3 }
|
|
|
|
nqaAdminCtrlType OBJECT-TYPE
|
|
SYNTAX NqaType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the test instance."
|
|
::= { nqaAdminCtrlEntry 4 }
|
|
|
|
nqaAdminCtrlFrequency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the interval when the test instance repeats."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminCtrlEntry 5 }
|
|
|
|
nqaAdminCtrlTimeOut OBJECT-TYPE
|
|
SYNTAX Integer32 (1..60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the duration to wait for the completion of test
|
|
instance. The default value of DHCP-type and FTP-type test
|
|
instance is 15s, The default value of PPPoE-type test
|
|
instance is 30s, and that of other types is 3s."
|
|
::= { nqaAdminCtrlEntry 6 }
|
|
|
|
nqaAdminCtrlThreshold1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the threshold of RTD (Round Trip Delay). If the
|
|
RTT violates the threshold, the corresponding counter will
|
|
increase. It applies to any type of test instance."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminCtrlEntry 7 }
|
|
|
|
nqaAdminCtrlThreshold2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the threshold of OWD (One Way Delay) from source
|
|
to destination. If the OWD violates the threshold, the
|
|
corresponding counter will increase. It applies only to
|
|
jitter-type test instances."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminCtrlEntry 8 }
|
|
|
|
nqaAdminCtrlThreshold3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the threshold of OWD (One Way Delay) from
|
|
destination to source. If the OWD violates the threshold,
|
|
the corresponding counter will increase. It applies only
|
|
to jitter-type test instances."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminCtrlEntry 9 }
|
|
|
|
nqaAdminCtrlStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To set the value of this object can create or delete the
|
|
specified test instance and the records belonging to it.
|
|
Before deleting a test instance, the custom must make sure
|
|
that the status of the test instance is inactive through
|
|
nqaScheduleOperStatus. The value can be set to
|
|
'CreateAndGo (4)', 'Destroy (6)' and 'Active (1)'."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { nqaAdminCtrlEntry 10 }
|
|
|
|
nqaAdminCtrlJitterThresholdSD OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the threshold of jitter from
|
|
source to destination. If the jitter violates the threshold,
|
|
the corresponding counter will increase. It applies only
|
|
to jitter-type and icmpjitter-type test instances."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminCtrlEntry 11 }
|
|
|
|
nqaAdminCtrlJitterThresholdDS OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the threshold of jitter from
|
|
destination to source. If the jitter violates the threshold, the corresponding counter will increase. It applies only
|
|
to jitter-type and icmpjitter-type test instances."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminCtrlEntry 12 }
|
|
|
|
|
|
nqaAdminParaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaAdminParaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: nqaAdminParaTable describes how to configure parameters of a test instance.
|
|
Creation restrictions: None
|
|
Modification restrictions: None
|
|
Deletion restrictions: None
|
|
Access restrictions: None "
|
|
::= { nqaCtrl 2 }
|
|
|
|
nqaAdminParaEntry OBJECT-TYPE
|
|
SYNTAX NqaAdminParaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set parameter in the nqaAdminParaTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
|
|
::= { nqaAdminParaTable 1 }
|
|
|
|
NqaAdminParaEntry ::=
|
|
SEQUENCE {
|
|
nqaAdminParaTargetAddressType
|
|
InetAddressType,
|
|
nqaAdminParaTargetAddress
|
|
InetAddress,
|
|
nqaAdminParaTargetPort
|
|
InetPortNumber,
|
|
nqaAdminParaSourceAddressType
|
|
InetAddressType,
|
|
nqaAdminParaSourceAddress
|
|
InetAddress,
|
|
nqaAdminParaSourcePort
|
|
InetPortNumber,
|
|
nqaAdminParaMaxTtl
|
|
Unsigned32,
|
|
nqaAdminParaInitialTtl
|
|
Unsigned32,
|
|
nqaAdminParaStorageType
|
|
StorageType,
|
|
nqaAdminParaMaxFailures
|
|
Unsigned32,
|
|
nqaAdminParaDontFragment
|
|
TruthValue,
|
|
nqaAdminParaDataSize
|
|
Unsigned32,
|
|
nqaAdminParaDataFill
|
|
OCTET STRING,
|
|
nqaAdminParaIfIndex
|
|
InterfaceIndexOrZero,
|
|
nqaAdminParaByPassRouteTable
|
|
TruthValue,
|
|
nqaAdminParaMiscOptions
|
|
SnmpAdminString,
|
|
nqaAdminParaProbeCount
|
|
Unsigned32,
|
|
nqaAdminParaTrapGeneration
|
|
BITS,
|
|
nqaAdminParaTrapProbeFailureFilter
|
|
Unsigned32,
|
|
nqaAdminParaTrapTestFailureFilter
|
|
Unsigned32,
|
|
nqaAdminParaDSField
|
|
Integer32,
|
|
nqaAdminParaDnsServerAddressType
|
|
InetAddressType,
|
|
nqaAdminParaDnsServerAddress
|
|
InetAddress,
|
|
nqaAdminParaOperation
|
|
NqaOperation,
|
|
nqaAdminParaHttpVersion
|
|
DisplayString,
|
|
nqaAdminParaHttpOperationString
|
|
DisplayString,
|
|
nqaAdminParaTestFailurePercent
|
|
Unsigned32,
|
|
nqaAdminParaFtpUserName
|
|
DisplayString,
|
|
nqaAdminParaFtpPassword
|
|
DisplayString,
|
|
nqaAdminParaFtpFilePath
|
|
DisplayString,
|
|
nqaAdminParaFtpFileSize
|
|
Integer32,
|
|
nqaAdminParaInterval
|
|
Integer32,
|
|
nqaAdminParaNumPackets
|
|
Integer32,
|
|
nqaAdminParaVrfName
|
|
DisplayString,
|
|
nqaAdminParaLspAddressType
|
|
INTEGER,
|
|
nqaAdminParaLspAddressMask
|
|
Integer32,
|
|
nqaAdminParaLspIpAddress
|
|
InetAddress,
|
|
nqaAdminParaLspPWE3VcId
|
|
Unsigned32,
|
|
nqaAdminParaLspPWE3Type
|
|
INTEGER,
|
|
nqaAdminParaLspPWE3Option
|
|
INTEGER,
|
|
nqaAdminParaLspPWE3RemoteVcId
|
|
Unsigned32,
|
|
nqaAdminParaLspPWE3RemoteAddress
|
|
InetAddress,
|
|
nqaAdminParaLspExp
|
|
Unsigned32,
|
|
nqaAdminParaLspReplyMode
|
|
INTEGER,
|
|
nqaAdminParaResultRowMax
|
|
Integer32,
|
|
nqaAdminParaHistoryRowMax
|
|
Integer32,
|
|
nqaAdminParaCreateHopsEntries
|
|
EnableValue,
|
|
nqaAdminParaLspVCType
|
|
INTEGER,
|
|
nqaAdminParaMTraceLastHopAddress
|
|
InetAddress,
|
|
nqaAdminParaMTraceSourceAddress
|
|
InetAddress,
|
|
nqaAdminParaMTraceGroupAddress
|
|
InetAddress,
|
|
nqaAdminParaMTraceMaxTtl
|
|
Unsigned32,
|
|
nqaAdminParaMTraceSendMode
|
|
INTEGER,
|
|
nqaAdminParaMTraceResponseTtl
|
|
Unsigned32,
|
|
nqaAdminParaMTraceResponseAddressType
|
|
InetAddressType,
|
|
nqaAdminParaMTraceResponseAddress
|
|
InetAddress,
|
|
nqaAdminParaDistanceNodeType
|
|
NqaDistanceNodeType,
|
|
nqaAdminParaMacAddress
|
|
MacAddress,
|
|
nqaAdminParaRMepID
|
|
Dot1agCfmMepIdOrZero,
|
|
nqaAdminParaMDName
|
|
OCTET STRING,
|
|
nqaAdminParaMAName
|
|
OCTET STRING,
|
|
nqaAdminParaMacTunnelName
|
|
OCTET STRING,
|
|
nqaAdminParaPathMtuStep
|
|
Integer32,
|
|
nqaAdminParaPathMtuDiscoveryPathMtuMax
|
|
Integer32,
|
|
nqaAdminParaIcmpJitterMode
|
|
INTEGER,
|
|
nqaAdminParaCodecType
|
|
INTEGER,
|
|
nqaAdminParaIcpifAdvFactor
|
|
Integer32,
|
|
nqaAdminParaFtpMode
|
|
INTEGER,
|
|
nqaAdminParaHardwareBased
|
|
EnabledStatus,
|
|
nqaAdminParaPppoeUserName
|
|
OCTET STRING,
|
|
nqaAdminParaPppoePassword
|
|
OCTET STRING,
|
|
nqaAdminParaPppoeVlanIf
|
|
Integer32,
|
|
nqaAdminParaPppoeAuthenticationMode
|
|
INTEGER,
|
|
nqaAdminParaPppoeRedialUpTimes
|
|
Integer32,
|
|
nqaAdminParaPppoeInterval
|
|
Integer32,
|
|
nqaAdminParaVsiName
|
|
|
|
OCTET STRING,
|
|
nqaAdminParaVlanId
|
|
VlanIdOrNone,
|
|
nqaAdminParaLspTunnelType
|
|
INTEGER,
|
|
nqaAdminParaLspNextHopAddress
|
|
InetAddress,
|
|
nqaAdminParaLspVersion
|
|
INTEGER,
|
|
nqaAdminParaRemoteAddressType
|
|
InetAddressType,
|
|
nqaAdminParaRemoteAddress
|
|
InetAddress,
|
|
nqaAdminParaTimeUnit
|
|
INTEGER,
|
|
nqaAdminParaProbeRate
|
|
Unsigned32,
|
|
nqaAdminParaLifeTime
|
|
Unsigned32,
|
|
nqaAdminParaProtocolType
|
|
ProtocolType,
|
|
nqaAdminParaSampleFrequency
|
|
Unsigned32,
|
|
nqaAdminParaPacketSize
|
|
Unsigned32,
|
|
nqaAdminParaPacketInterval
|
|
Unsigned32,
|
|
nqaAdminParaNextHopAddressType
|
|
InetAddressType,
|
|
nqaAdminParaNextHopAddress
|
|
InetAddress,
|
|
nqaAdminParaForwardingSimulationInboundIfIndex
|
|
InterfaceIndexOrZero,
|
|
nqaAdminParaMeasure
|
|
INTEGER,
|
|
nqaAdminParaEthPriority
|
|
Unsigned32,
|
|
nqaAdminParaMinRate
|
|
Unsigned32,
|
|
nqaAdminParaMaxRate
|
|
Unsigned32,
|
|
nqaAdminParaCevid
|
|
Unsigned32,
|
|
nqaAdminParaPevid
|
|
Unsigned32,
|
|
nqaAdminParaPrecision
|
|
Unsigned32,
|
|
nqaAdminParaSnmpCommunityRead
|
|
OCTET STRING,
|
|
nqaAdminParaDatasizeList
|
|
OCTET STRING,
|
|
nqaAdminParaFailRatioPrecision
|
|
Unsigned32,
|
|
nqaAdminParaFailRatioValue
|
|
Unsigned32,
|
|
nqaAdminGeneralflowTestBehavior
|
|
Unsigned32,
|
|
nqaAdminParaFrameRate
|
|
INTEGER,
|
|
nqaAdminGeneralflowDiscardNonTestPriority
|
|
Unsigned32,
|
|
nqaAdminParaSourceMacAddress
|
|
MacAddress,
|
|
nqaAdminParaCeEthType
|
|
SnmpAdminString,
|
|
nqaAdminParaPeEthType
|
|
SnmpAdminString,
|
|
nqaAdminParaDirection
|
|
Unsigned32,
|
|
nqaAdminParaLspVpnFrrPathType
|
|
INTEGER,
|
|
nqaAdminParaSoftwareBased
|
|
EnabledStatus,
|
|
nqaAdminParaLspPathType
|
|
INTEGER,
|
|
nqaAdminParaPathType
|
|
INTEGER,
|
|
nqaAdminParaFragment
|
|
TruthValue,
|
|
nqaAdminParaEthPriorityStatus
|
|
EnabledStatus,
|
|
nqaAdminParaRmoteFecType
|
|
INTEGER,
|
|
nqaAdminParaRmoteFecMask
|
|
Integer32,
|
|
nqaAdminParaRmoteFecIpAddress
|
|
InetAddress,
|
|
nqaAdminParaSrPolicyName
|
|
OCTET STRING,
|
|
nqaAdminParaSrPolicyEndPointAddrType
|
|
InetAddressType,
|
|
nqaAdminParaSrPolicyEndPointIpAddress
|
|
InetAddress,
|
|
nqaAdminParaSrPolicyEndPointColor
|
|
Unsigned32,
|
|
nqaAdminParaSrPolicyBindingSid
|
|
Unsigned32,
|
|
nqaAdminParaDscp
|
|
TruthValue,
|
|
nqaAdminParaFlexAlgoId
|
|
Unsigned32
|
|
}
|
|
|
|
nqaAdminParaTargetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address type of destination."
|
|
DEFVAL { unknown }
|
|
::= { nqaAdminParaEntry 1 }
|
|
|
|
nqaAdminParaTargetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address of destination."
|
|
::= { nqaAdminParaEntry 2 }
|
|
|
|
nqaAdminParaTargetPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the port number of destination."
|
|
::= { nqaAdminParaEntry 3 }
|
|
|
|
nqaAdminParaSourceAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address type of source."
|
|
DEFVAL { unknown }
|
|
::= { nqaAdminParaEntry 4 }
|
|
|
|
nqaAdminParaSourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address of source."
|
|
::= { nqaAdminParaEntry 5 }
|
|
|
|
nqaAdminParaSourcePort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the port number of source."
|
|
::= { nqaAdminParaEntry 6 }
|
|
|
|
nqaAdminParaMaxTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "time-to-live value"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe."
|
|
::= { nqaAdminParaEntry 7 }
|
|
|
|
nqaAdminParaInitialTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the initial value of TTL."
|
|
DEFVAL { 1 }
|
|
::= { nqaAdminParaEntry 8 }
|
|
|
|
nqaAdminParaStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row. Conceptual rows
|
|
having the value 'permanent' need not allow write-access
|
|
to any columnar objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { nqaAdminParaEntry 9 }
|
|
|
|
nqaAdminParaMaxFailures OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
UNITS "timeouts"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the maximum number of
|
|
consecutive timeouts allowed before terminating a remote
|
|
traceroute request. A value of 255 (maximum hop
|
|
count/possible TTL value) indicates that the function
|
|
of terminating a remote traceroute request when a specific
|
|
number of successive timeouts are detected is disabled."
|
|
DEFVAL { 5 }
|
|
::= { nqaAdminParaEntry 10 }
|
|
|
|
nqaAdminParaDontFragment OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables setting of Don't Fragment (DF) flag in
|
|
the IP header for a probe. Use of this object enables
|
|
performing a manual PATH MTU test."
|
|
DEFVAL { false }
|
|
::= { nqaAdminParaEntry 11 }
|
|
|
|
nqaAdminParaDataSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "octets"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of data field in packet."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaEntry 12 }
|
|
|
|
nqaAdminParaDataFill OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the characters used for filling the data field.
|
|
This object is used together with the corresponding object,
|
|
nqaAdminParaDataSize."
|
|
DEFVAL { '00'H }
|
|
::= { nqaAdminParaEntry 13 }
|
|
|
|
nqaAdminParaIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specified the source interface or tunnel, from which probes
|
|
of the test instance are sent. The value zero implies that the
|
|
object is disabled."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaEntry 14 }
|
|
|
|
nqaAdminParaByPassRouteTable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The purpose of this object is to optionally enable bypassing
|
|
the route table. If enabled, the remote host will bypass the
|
|
normal routing tables and send directly to a host on an attached
|
|
network. If the host is not on a directly-attached network, an
|
|
error is returned. This option can be used to perform the
|
|
ping/traceroute operation to a local host through an interface
|
|
that has no route defined (e.g., after the interface was dropped
|
|
by routed)."
|
|
DEFVAL { false }
|
|
::= { nqaAdminParaEntry 15 }
|
|
|
|
nqaAdminParaMiscOptions OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables an application to specify implementation dependent options."
|
|
DEFVAL { ''H }
|
|
::= { nqaAdminParaEntry 16 }
|
|
|
|
nqaAdminParaProbeCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "probes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of packets sent by the test instance, or times
|
|
of probe repeated, in which may send several packets. In the first case,
|
|
the range is 1 to 65535 for IAS and 1 to 15 for other products. The second
|
|
case applies to jitter-type test instances."
|
|
::= { nqaAdminParaEntry 17 }
|
|
|
|
|
|
nqaAdminParaTrapGeneration OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
probeFailure(0),
|
|
testFailure(1),
|
|
testCompletion(2),
|
|
overRtdThreshold(3),
|
|
overOwdThresholdSd(4),
|
|
overOwdThresholdDs(5),
|
|
overJitterThresholdSd(6),
|
|
overJitterThresholdDs(7),
|
|
testResultChange(8),
|
|
resultChangePacked(9)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch of notification. Determine whether and how to send notifications
|
|
for the test instance:
|
|
- probeFailure(0) - Generate a PathChange notification when the current
|
|
path varies from a previously determined path.
|
|
- testFailure(1) - Generate a TestFailed notification when the full
|
|
path to a target cannot be determined.
|
|
- testCompletion(2) - Generate a TestCompleted notification when the path
|
|
to a target has been determined.
|
|
- overRtdThreshold(3) - Generate an Overthreshold of RTD notification when
|
|
the statistic results exceed threshold.
|
|
- overOwdThresholdSd(4) - Generate an Overthreshold of OWD-SD notification
|
|
when the statistic results exceed threshold.
|
|
- overOwdThresholdDs(5) - Generate an Overthreshold of OWD-DS notification
|
|
when the statistic results exceed threshold.
|
|
- overJitterThresholdSd(6) - Generate an Overthreshold of Jitter-SD notification
|
|
when the statistic results exceed threshold.
|
|
- overJitterThresholdDs(7) - Generate an Overthreshold of Jitter-DS notification
|
|
when the statistic results exceed threshold.
|
|
- testResultChange(8) - Generate a TestResultChange notification
|
|
when test result is changed.
|
|
- resultChangePacked(9) - Generate a packed trap when test result is changed. No
|
|
more than two traps will be sent in one second and each trap contains at most ten
|
|
records.
|
|
The value #0x00 indicates disable all notifications."
|
|
::= { nqaAdminParaEntry 18 }
|
|
|
|
nqaAdminParaTrapProbeFailureFilter OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the condition when to trigger an nqaProbeFailed notification.
|
|
When the number of consecutive failed probes violates the threshold indicated
|
|
by nqaAdminParaTrapProbeFailureFilter, a notification will be created. This
|
|
object is used together with nqaAdminParaTrapGeneration."
|
|
DEFVAL { 1 }
|
|
::= { nqaAdminParaEntry 19 }
|
|
|
|
nqaAdminParaTrapTestFailureFilter OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the condition when to trigger an nqaTestFailed notification. When
|
|
the number of failed tests violates the threshold indicated by
|
|
nqaAdminParaTrapTestFailureFilter, a notification will be created. There are
|
|
usually several probes in each test. This object is used together with
|
|
nqaAdminParaTrapGeneration."
|
|
DEFVAL { 1 }
|
|
::= { nqaAdminParaEntry 20 }
|
|
|
|
nqaAdminParaDSField OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the Differentiated Services (DS) field in the IP packet. The DS
|
|
field is defined as the Type Of Service (TOS) octet in IPv4 header or as
|
|
the Traffic Class octet in IPv6 header."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaEntry 21 }
|
|
|
|
nqaAdminParaDnsServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of DNS server."
|
|
DEFVAL { unknown }
|
|
::= { nqaAdminParaEntry 22 }
|
|
|
|
nqaAdminParaDnsServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address of DNS server."
|
|
::= { nqaAdminParaEntry 23 }
|
|
|
|
nqaAdminParaOperation OBJECT-TYPE
|
|
SYNTAX NqaOperation
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operation of FTP or HTTP type test instance. The
|
|
operations of FTP-type test instance include get and put. The
|
|
operations of HTTP-type test instance include get and post."
|
|
DEFVAL { noOperation }
|
|
::= { nqaAdminParaEntry 24 }
|
|
|
|
nqaAdminParaHttpVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the version of HTTP."
|
|
::= { nqaAdminParaEntry 25 }
|
|
|
|
nqaAdminParaHttpOperationString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string that specifies the HTTP operation which will be sent
|
|
to the HTTP server."
|
|
::= { nqaAdminParaEntry 26 }
|
|
|
|
nqaAdminParaTestFailurePercent OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the scale over which the test will be regarded as failed."
|
|
DEFVAL { 100 }
|
|
::= { nqaAdminParaEntry 27 }
|
|
|
|
nqaAdminParaFtpUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the user name of the FTP server."
|
|
::= { nqaAdminParaEntry 28 }
|
|
|
|
nqaAdminParaFtpPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the password of the user of the FTP server."
|
|
::= { nqaAdminParaEntry 29 }
|
|
|
|
nqaAdminParaFtpFilePath OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the full name of the file which will be transmitted
|
|
by the FTP-type test instance."
|
|
::= { nqaAdminParaEntry 30 }
|
|
|
|
nqaAdminParaFtpFileSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the size that the file will be transmitted by the
|
|
FTP-type test instance. It may be part of the file."
|
|
::= { nqaAdminParaEntry 31 }
|
|
|
|
nqaAdminParaInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..60000)
|
|
UNITS "millseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the interval between two consecutive probe packets.
|
|
If the test type is JITTER, ICMP JITTER or GENERALFLOW,
|
|
the interval is restored to the default value when the value is set to 0."
|
|
::= { nqaAdminParaEntry 32 }
|
|
|
|
nqaAdminParaNumPackets OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of packet sent in each probe. This object
|
|
is used together with nqaAdminParaProbeCount, and only applies to
|
|
jitter-type test instance."
|
|
DEFVAL { 20 }
|
|
::= { nqaAdminParaEntry 33 }
|
|
|
|
nqaAdminParaVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VRF name."
|
|
::= { nqaAdminParaEntry 34 }
|
|
|
|
nqaAdminParaLspAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4(1),
|
|
te(3),
|
|
ipv4vpn(6),
|
|
srte(8),
|
|
srbe(9),
|
|
bgp(12),
|
|
srtepolicy(13),
|
|
ring(100)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of LSP. The object applies to lspping,
|
|
lsptrace and lspjitter type test instance."
|
|
::= { nqaAdminParaEntry 35 }
|
|
|
|
nqaAdminParaLspAddressMask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address mask of LSP. The object applies to lspping,
|
|
lsptrace and lspjitter type test instance."
|
|
::= { nqaAdminParaEntry 36 }
|
|
|
|
nqaAdminParaLspIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address filled in the ip header, must be a 127/8 address."
|
|
::= { nqaAdminParaEntry 37 }
|
|
|
|
nqaAdminParaLspPWE3VcId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local Pseudo wire ID in PWE3 Ping test"
|
|
::= { nqaAdminParaEntry 38 }
|
|
|
|
nqaAdminParaLspPWE3Type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fr(1),
|
|
atmAal5Sdu(2),
|
|
atmCellTransport(3),
|
|
vlan(4),
|
|
ethernet(5),
|
|
hdlc(6),
|
|
ppp(7),
|
|
atmNto1Vcc(9),
|
|
atmNto1Vpc(10),
|
|
ipLayer2(11),
|
|
atm1to1Vcc(12),
|
|
atm1to1Vpc(13),
|
|
cep(16),
|
|
satopE1(17),
|
|
satopT1(18),
|
|
satopE3(19),
|
|
cesopsnBasic(21),
|
|
ipInterworking(64)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encapsulation type of Pseudo wire ID in the PWE3 Ping test"
|
|
::= { nqaAdminParaEntry 39 }
|
|
|
|
nqaAdminParaLspPWE3Option OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
labelAlert(1),
|
|
controlWord(2),
|
|
normal(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The label type of PWE3 Ping and PWE3 Tracert test."
|
|
::= { nqaAdminParaEntry 40 }
|
|
|
|
nqaAdminParaLspPWE3RemoteVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote Pseudo wire ID in PWE Ping test."
|
|
::= { nqaAdminParaEntry 41 }
|
|
|
|
nqaAdminParaLspPWE3RemoteAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote IP address in PWE3 Ping test."
|
|
::= { nqaAdminParaEntry 42 }
|
|
|
|
nqaAdminParaLspExp OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 3bit EXP field of the MPLS echo packet label."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaEntry 43 }
|
|
|
|
nqaAdminParaLspReplyMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noReply(1),
|
|
udp(2),
|
|
udpRouterAlert(3),
|
|
levelControlChannel(4),
|
|
udpviaVPLS(5),
|
|
specifiedTunnelPath(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ReplyMode
|
|
Value Meaning
|
|
***** *******
|
|
1 Do not reply
|
|
2 Reply via an IPv4/IPv6 UDP packet
|
|
3 Reply via an IPv4/IPv6 UDP packet with Router Alert
|
|
4 Reply via application level control channel
|
|
5 Reply via a VPLS IPv4 UDP packet
|
|
6 Reply via a SR-MPLS TE tunnel"
|
|
DEFVAL { udp }
|
|
::= { nqaAdminParaEntry 44 }
|
|
|
|
nqaAdminParaResultRowMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum number of result records."
|
|
DEFVAL { 5 }
|
|
::= { nqaAdminParaEntry 45 }
|
|
|
|
nqaAdminParaHistoryRowMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum number of history records."
|
|
DEFVAL { 50 }
|
|
::= { nqaAdminParaEntry 46 }
|
|
|
|
nqaAdminParaCreateHopsEntries OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to enable (1), the result of each hop
|
|
will be kept in nqaResultsTable. The object applies
|
|
to trace, pwe3trace, lsptrace, vplstrace, vplspwtrace type test instance."
|
|
DEFVAL { disable }
|
|
::= { nqaAdminParaEntry 47 }
|
|
|
|
nqaAdminParaLspVCType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ldp(1),
|
|
bgp(2),
|
|
bgpad(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of protocol which establishes PW in the pwe3tracert test"
|
|
::= { nqaAdminParaEntry 48 }
|
|
|
|
nqaAdminParaMTraceLastHopAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last hop router's IP address in Mtrace test."
|
|
::= { nqaAdminParaEntry 49 }
|
|
|
|
nqaAdminParaMTraceSourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the multicast source for the path being
|
|
traced in Mtrace test."
|
|
::= { nqaAdminParaEntry 50 }
|
|
|
|
nqaAdminParaMTraceGroupAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address to be traced in Mtrace test, or zero if no
|
|
group-specific information is desired."
|
|
::= { nqaAdminParaEntry 51 }
|
|
|
|
nqaAdminParaMTraceMaxTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of hops that the requester wants to
|
|
trace in Mtrace test."
|
|
DEFVAL { 255 }
|
|
::= { nqaAdminParaEntry 52 }
|
|
|
|
nqaAdminParaMTraceSendMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
multicastTree(1),
|
|
allRouter(2),
|
|
destination (3),
|
|
lastHop(4)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sending mode of the Query pamessage in Mtrace test."
|
|
DEFVAL { multicastTree }
|
|
::= { nqaAdminParaEntry 53 }
|
|
|
|
nqaAdminParaMTraceResponseTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TTL at which to multicast the response in Mtrace test,
|
|
if the response address is a multicast address."
|
|
DEFVAL { 64 }
|
|
::= { nqaAdminParaEntry 54 }
|
|
|
|
nqaAdminParaMTraceResponseAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mtrace response address type"
|
|
DEFVAL { unknown }
|
|
::= { nqaAdminParaEntry 55 }
|
|
|
|
nqaAdminParaMTraceResponseAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field specifies where the completed traceroute response
|
|
packet gets sent in Mtrace test. It can be a unicast address or
|
|
a multicast address"
|
|
::= { nqaAdminParaEntry 56 }
|
|
|
|
nqaAdminParaDistanceNodeType OBJECT-TYPE
|
|
SYNTAX NqaDistanceNodeType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination of MAC ping(mac address or rmepid)."
|
|
::= { nqaAdminParaEntry 57 }
|
|
|
|
nqaAdminParaMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address of the destination of MAC PING."
|
|
::= { nqaAdminParaEntry 58 }
|
|
|
|
nqaAdminParaRMepID OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rmepid of the destination of MAC PING."
|
|
::= { nqaAdminParaEntry 59 }
|
|
|
|
nqaAdminParaMDName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..43))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the MD name in which the MAC Ping operated."
|
|
::= { nqaAdminParaEntry 60 }
|
|
|
|
nqaAdminParaMAName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..45))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the MA name in which the MAC Ping operated."
|
|
::= { nqaAdminParaEntry 61 }
|
|
|
|
nqaAdminParaMacTunnelName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the MAC Tunnel name in which the MAC Ping operated."
|
|
::= { nqaAdminParaEntry 62 }
|
|
|
|
nqaAdminParaPathMtuStep OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the step of the path MTU test. If the last response
|
|
was received successful,the next packet's length will add
|
|
the step."
|
|
::= { nqaAdminParaEntry 63 }
|
|
|
|
nqaAdminParaPathMtuDiscoveryPathMtuMax OBJECT-TYPE
|
|
SYNTAX Integer32 (48..9198)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the max value of the discovery field in the path MTU test."
|
|
::= { nqaAdminParaEntry 64 }
|
|
|
|
nqaAdminParaIcmpJitterMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
icmpTimestamp(1),
|
|
icmpEcho(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the type of ICMP packets to be sent in ICMP jitter and path
|
|
jitter test. The value can be icmpTimestamp(1) or icmpEcho(2)."
|
|
::= { nqaAdminParaEntry 65 }
|
|
|
|
nqaAdminParaCodecType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notDefined(1), -- no codec type is defined or codec is unknown
|
|
g711Alaw(2), -- uses G.711 A-Law
|
|
g711Ulaw(3), -- uses G.711 muHmm-Law
|
|
g729A(4) -- uses G.729A
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To indicate the codec type to be used with jitter probe. This is
|
|
applicable only for the jitter probe."
|
|
DEFVAL { notDefined }
|
|
::= { nqaAdminParaEntry 66 }
|
|
|
|
nqaAdminParaIcpifAdvFactor OBJECT-TYPE
|
|
SYNTAX Integer32 (0..20)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The advantage factor depends on the type of access and how the service
|
|
is to be used. This object will be used while calculating the ICPIF
|
|
(Calculated Planning Impairment Factor) values.
|
|
|
|
Suggestion values:
|
|
|***************************************************|*******|
|
|
| Service |factor |
|
|
|***************************************************|*******|
|
|
| conventional wire-line | 0 |
|
|
|***************************************************|*******|
|
|
| mobility within Building | 5 |
|
|
|***************************************************|*******|
|
|
| mobility within geographical area | 10 |
|
|
|***************************************************|*******|
|
|
| access to hard-to-reach location | 20 |
|
|
|***************************************************|*******|
|
|
"
|
|
DEFVAL {0}
|
|
::= { nqaAdminParaEntry 67 }
|
|
|
|
nqaAdminParaFtpMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1), -- active mode is defined in ftp test
|
|
passive(2) -- passive mode is defined in ftp test
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To indicate the mode to be used with ftp probe. This is
|
|
applicable only for the ftp probe."
|
|
DEFVAL { active }
|
|
::= { nqaAdminParaEntry 68 }
|
|
|
|
nqaAdminParaHardwareBased OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the hardware is enabled to send packets.
|
|
(The value range: enable:1;disable:2.The default value is disable(2))"
|
|
::= { nqaAdminParaEntry 69 }
|
|
|
|
nqaAdminParaPppoeUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute,
|
|
tcp,udp,ftp,dns,http probes, this parameter indicates that the probe
|
|
uses PPPoE encapsulation.
|
|
This parameter accepts the characters in sight only."
|
|
::= { nqaAdminParaEntry 70 }
|
|
|
|
nqaAdminParaPppoePassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the password of PPPoE dial-up. This is
|
|
applicable only for the PPPoE probe.
|
|
This parameter accepts the characters in sight only."
|
|
::= { nqaAdminParaEntry 71 }
|
|
|
|
nqaAdminParaPppoeVlanIf OBJECT-TYPE
|
|
SYNTAX Integer32(0..4093)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp,
|
|
udp, ftp, dns, http probes, this parameter indicates that the probe uses
|
|
PPPoE encapsulation."
|
|
::= { nqaAdminParaEntry 72 }
|
|
|
|
nqaAdminParaPppoeAuthenticationMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
chap(1),
|
|
pap(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the authentication mode of PPPoE dial-up. This is
|
|
applicable only for the PPPoE probe."
|
|
::= { nqaAdminParaEntry 73 }
|
|
|
|
nqaAdminParaPppoeRedialUpTimes OBJECT-TYPE
|
|
SYNTAX Integer32(0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the redialup times of PPPoE dial-up. This is
|
|
applicable only for the PPPoE probe."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaEntry 74 }
|
|
|
|
nqaAdminParaPppoeInterval OBJECT-TYPE
|
|
SYNTAX Integer32(1..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the redialup interval of PPPoE dial-up. This is
|
|
applicable only for the PPPoE probe."
|
|
DEFVAL { 60 }
|
|
::= { nqaAdminParaEntry 75 }
|
|
|
|
nqaAdminParaVsiName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the name of the VSI(Virtual Switch Instance)"
|
|
::= { nqaAdminParaEntry 76 }
|
|
|
|
nqaAdminParaVlanId OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the Vlan ID"
|
|
::= { nqaAdminParaEntry 77 }
|
|
|
|
nqaAdminParaLspTunnelType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(0), -- ping/trace the main lsp tunnel
|
|
hotstandby(1), -- ping/trace the hot-standby lsp tunnel
|
|
primary(2) -- ping/trace the primary lsp tunnel
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To indicate ping/trace which lsp tunnel."
|
|
DEFVAL { main }
|
|
::= { nqaAdminParaEntry 78 }
|
|
|
|
nqaAdminParaLspNextHopAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address of nexthop."
|
|
::= { nqaAdminParaEntry 79 }
|
|
|
|
nqaAdminParaLspVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
draft6(1),
|
|
rfc4379(2),
|
|
ptnmode(3),
|
|
compatiblemode(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol , ptn mode or compatible mode."
|
|
DEFVAL { draft6 }
|
|
::= { nqaAdminParaEntry 80 }
|
|
|
|
nqaAdminParaRemoteAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address type of remote."
|
|
DEFVAL { unknown }
|
|
::= { nqaAdminParaEntry 81 }
|
|
|
|
nqaAdminParaRemoteAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address of remote."
|
|
::= { nqaAdminParaEntry 82 }
|
|
nqaAdminParaTimeUnit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
us(1), -- The unit of the timestamp is us
|
|
ms(2) -- The unit of the timestamp is ms
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit of the timestamp, ms or us."
|
|
::= { nqaAdminParaEntry 83 }
|
|
|
|
nqaAdminParaProbeRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of sending message, bps."
|
|
::= { nqaAdminParaEntry 84 }
|
|
|
|
nqaAdminParaLifeTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The life time of test-case, s."
|
|
::= { nqaAdminParaEntry 85 }
|
|
|
|
nqaAdminParaProtocolType OBJECT-TYPE
|
|
SYNTAX ProtocolType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol type of test-case. When the test type is rtptest or rtpsnoop, the default value is udp(1), when the test type is not rtptest or rtpsnoop, the default value is unknown(0), which means unspecified or unused."
|
|
::= { nqaAdminParaEntry 86 }
|
|
|
|
nqaAdminParaSampleFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency of rtpsnoop test, khz."
|
|
::= { nqaAdminParaEntry 87 }
|
|
|
|
nqaAdminParaPacketSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The packet size of message, byte."
|
|
::= { nqaAdminParaEntry 88 }
|
|
|
|
nqaAdminParaPacketInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval of sending message, ms."
|
|
::= { nqaAdminParaEntry 89 }
|
|
|
|
nqaAdminParaNextHopAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of nexthop."
|
|
DEFVAL { unknown }
|
|
::= { nqaAdminParaEntry 90 }
|
|
|
|
nqaAdminParaNextHopAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address of nexthop."
|
|
::= { nqaAdminParaEntry 91 }
|
|
|
|
nqaAdminParaForwardingSimulationInboundIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the inbound interface to simulate product forwarding."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaEntry 92 }
|
|
|
|
nqaAdminParaMeasure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
delay(1),
|
|
loss(2),
|
|
throughput(3)
|
|
|
|
} MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the test mode for generalflow test."
|
|
::= { nqaAdminParaEntry 93 }
|
|
|
|
nqaAdminParaEthPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the priority of Ethernet packets for generalflow test in the Ethernet service scenario."
|
|
::= { nqaAdminParaEntry 94 }
|
|
|
|
nqaAdminParaMinRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the minimum transmitting rate, in Kbps."
|
|
::= { nqaAdminParaEntry 95 }
|
|
|
|
nqaAdminParaMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the maximum transmitting rate, in Kbps."
|
|
::= { nqaAdminParaEntry 96 }
|
|
|
|
nqaAdminParaCevid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the CE VLAN ID for generalflow test in the Ethernet service scenario.
|
|
"
|
|
::= { nqaAdminParaEntry 97 }
|
|
|
|
nqaAdminParaPevid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the PE VLAN ID for generalflow test in the Ethernet service scenario."
|
|
::= { nqaAdminParaEntry 98 }
|
|
|
|
nqaAdminParaPrecision OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the throughput precision."
|
|
::= { nqaAdminParaEntry 99 }
|
|
|
|
nqaAdminParaSnmpCommunityRead OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the community name to that with a read-only permission configured on the SNMP agent. When read, it always returns length 0."
|
|
::= { nqaAdminParaEntry 100 }
|
|
|
|
nqaAdminParaDatasizeList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of data field in packet for generalflow test, default '64 128 256 512 1024 1280 1518'."
|
|
::= { nqaAdminParaEntry 101 }
|
|
|
|
nqaAdminParaFailRatioPrecision OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the precision of the threshold for the packet loss ratio.
|
|
0 indicates in 10e-4.
|
|
1 indicates in 10e-9."
|
|
::= { nqaAdminParaEntry 102 }
|
|
|
|
nqaAdminParaFailRatioValue OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the threshold for the packet loss ratio.The default value is 0."
|
|
::= { nqaAdminParaEntry 103 }
|
|
|
|
nqaAdminGeneralflowTestBehavior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the action performed on the non-test frames by the initiator.
|
|
0: Non-test frames will be discarded, and test frames will be forwarded.
|
|
1: Both non-test frames and test frames will be forwarded."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaEntry 104 }
|
|
|
|
nqaAdminParaFrameRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
l1(1),
|
|
l2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an Ethernet frame rate.
|
|
1: utilized line rate (L1 rate).
|
|
2: information rate (L2 rate)."
|
|
::= { nqaAdminParaEntry 105 }
|
|
|
|
nqaAdminGeneralflowDiscardNonTestPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the discarding priority of Ethernet packets for generalflow test in the Ethernet service scenario.
|
|
The value can range from 0 to 7 if this node was configured, the value will be 0xffffffff if this node was not configured. "
|
|
::= { nqaAdminParaEntry 106 }
|
|
|
|
nqaAdminParaSourceMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address of the source point."
|
|
::= { nqaAdminParaEntry 107 }
|
|
|
|
nqaAdminParaCeEthType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of Ethernet encapsulation.Default is 0x8100."
|
|
::= { nqaAdminParaEntry 108 }
|
|
|
|
nqaAdminParaPeEthType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of Ethernet encapsulation for QinQ outer vlan. Default is 0x8100."
|
|
::= { nqaAdminParaEntry 109 }
|
|
|
|
nqaAdminParaDirection OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the test direction.
|
|
1 indicates inbound. Send packets in manner of simulate product forwarding.
|
|
2 indicates outbound. Send packets in manner of output."
|
|
::= { nqaAdminParaEntry 110 }
|
|
|
|
nqaAdminParaLspVpnFrrPathType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(0), -- ping the main ipv4-vpn lsp
|
|
backup(1) -- ping the backup ipv4-vpn lsp
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To indicate ping which ipv4-vpn lsp."
|
|
DEFVAL { main }
|
|
::= { nqaAdminParaEntry 111 }
|
|
|
|
nqaAdminParaSoftwareBased OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the software-based test is enabled only when the test case type is rtptest.
|
|
(The value range: enable:1;disable:2.The default value is disable(2))"
|
|
::= { nqaAdminParaEntry 112 }
|
|
|
|
nqaAdminParaLspPathType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1), -- ping vpls pw via working lsp
|
|
bypass(2) -- ping vpls pw via bypass lsp
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To indicate ping vpls pw via which lsp."
|
|
DEFVAL { main }
|
|
::= { nqaAdminParaEntry 113 }
|
|
|
|
nqaAdminParaPathType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
bypass(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To indicate ping request packet via which path."
|
|
DEFVAL { main }
|
|
::= { nqaAdminParaEntry 114 }
|
|
|
|
nqaAdminParaFragment OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables setting of Fragment (F) flag in
|
|
the IP header for a probe."
|
|
DEFVAL { false }
|
|
::= { nqaAdminParaEntry 115 }
|
|
|
|
nqaAdminParaEthPriorityStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used for enabling or disabling the priority of Ethernet functionality when the test case type is Generalflow.
|
|
Options:
|
|
1. enabled(1) -indicates the priority of Ethernet functionality is enabled.
|
|
2. disabled(2) -indicates the priority of Ethernet functionality is disabled.
|
|
Default: disabled(2)."
|
|
::= { nqaAdminParaEntry 116 }
|
|
|
|
nqaAdminParaRmoteFecType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
null(0),
|
|
ldp(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the remote FEC type. The object applies to lspping and
|
|
lsptrace type test instance."
|
|
DEFVAL { null }
|
|
::= { nqaAdminParaEntry 117 }
|
|
|
|
nqaAdminParaRmoteFecMask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address mask of remote FEC. The object applies to lspping and
|
|
lsptrace type test instance."
|
|
::= { nqaAdminParaEntry 118 }
|
|
|
|
nqaAdminParaRmoteFecIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPV4 address of remote FEC. The object applies to lspping and
|
|
lsptrace type test instance."
|
|
::= { nqaAdminParaEntry 119 }
|
|
|
|
nqaAdminParaSrPolicyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Policy name of of the SR-MPLS TE policy. The object applies to lspping and
|
|
lsptrace type test instance."
|
|
::= { nqaAdminParaEntry 120 }
|
|
|
|
nqaAdminParaSrPolicyEndPointAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the address type of destination."
|
|
DEFVAL { unknown }
|
|
::= { nqaAdminParaEntry 121}
|
|
|
|
nqaAdminParaSrPolicyEndPointIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination of of the SR-MPLS TE policy. The object applies to lspping and
|
|
lsptrace type test instance."
|
|
::= { nqaAdminParaEntry 122 }
|
|
|
|
nqaAdminParaSrPolicyEndPointColor OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The color of of the SR-MPLS TE policy. The object applies to lspping and
|
|
lsptrace type test instance."
|
|
::= { nqaAdminParaEntry 123 }
|
|
|
|
nqaAdminParaSrPolicyBindingSid OBJECT-TYPE
|
|
SYNTAX Unsigned32(0 | 16..1048575)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The binding sid of of the SR-MPLS TE policy. The object applies to lspping and
|
|
lsptrace type test instance."
|
|
::= { nqaAdminParaEntry 124 }
|
|
|
|
nqaAdminParaDscp OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the DS field is defined as the DSCP in the IP packet."
|
|
DEFVAL { false }
|
|
::= { nqaAdminParaEntry 125 }
|
|
|
|
nqaAdminParaFlexAlgoId OBJECT-TYPE
|
|
SYNTAX Unsigned32(0 | 128..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flexible algorithm ID. The object applies to lspping and lsptrace type test instance."
|
|
::= { nqaAdminParaEntry 126 }
|
|
|
|
nqaAdminParaExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaAdminParaExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: Objects in this table are used in pairs. In each pair, the first object is read-only. After the test instance type is specified, the system automatically fills the character string. Its content is the description of the second object, so that the user can learn the description and value range of the second object. The second object is a configurable NQA parameter. Test instances have different descriptions and values. After the test instance type is specified, the user can obtain the information from the first object. The values of the first 15 pairs of objects in this table are numbers, and those of the last 10 pairs of objects are character strings.
|
|
Creation restrictions: None
|
|
Modification restrictions: None
|
|
Deletion restrictions: None
|
|
Access restrictions: None"
|
|
::= { nqaCtrl 5 }
|
|
|
|
nqaAdminParaExtEntry OBJECT-TYPE
|
|
SYNTAX NqaAdminParaExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set parameter in the nqaAdminParaExtTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
|
|
::= { nqaAdminParaExtTable 1 }
|
|
|
|
NqaAdminParaExtEntry ::=
|
|
SEQUENCE {
|
|
nqaAdminExtPara1
|
|
OCTET STRING,
|
|
nqaAdminExtPara2
|
|
Integer32,
|
|
nqaAdminExtPara3
|
|
OCTET STRING,
|
|
nqaAdminExtPara4
|
|
Integer32,
|
|
nqaAdminExtPara5
|
|
OCTET STRING,
|
|
nqaAdminExtPara6
|
|
Integer32,
|
|
nqaAdminExtPara7
|
|
OCTET STRING,
|
|
nqaAdminExtPara8
|
|
Integer32,
|
|
nqaAdminExtPara9
|
|
OCTET STRING,
|
|
nqaAdminExtPara10
|
|
Integer32,
|
|
nqaAdminExtPara11
|
|
OCTET STRING,
|
|
nqaAdminExtPara12
|
|
Integer32,
|
|
nqaAdminExtPara13
|
|
OCTET STRING,
|
|
nqaAdminExtPara14
|
|
Integer32,
|
|
nqaAdminExtPara15
|
|
OCTET STRING,
|
|
nqaAdminExtPara16
|
|
Integer32,
|
|
nqaAdminExtPara17
|
|
OCTET STRING,
|
|
nqaAdminExtPara18
|
|
Integer32,
|
|
nqaAdminExtPara19
|
|
OCTET STRING,
|
|
nqaAdminExtPara20
|
|
Integer32,
|
|
nqaAdminExtPara21
|
|
OCTET STRING,
|
|
nqaAdminExtPara22
|
|
Integer32,
|
|
nqaAdminExtPara23
|
|
OCTET STRING,
|
|
nqaAdminExtPara24
|
|
Integer32,
|
|
nqaAdminExtPara25
|
|
OCTET STRING,
|
|
nqaAdminExtPara26
|
|
Integer32,
|
|
nqaAdminExtPara27
|
|
OCTET STRING,
|
|
nqaAdminExtPara28
|
|
Integer32,
|
|
nqaAdminExtPara29
|
|
OCTET STRING,
|
|
nqaAdminExtPara30
|
|
Integer32,
|
|
nqaAdminExtPara31
|
|
OCTET STRING,
|
|
nqaAdminExtPara32
|
|
OCTET STRING,
|
|
nqaAdminExtPara33
|
|
OCTET STRING,
|
|
nqaAdminExtPara34
|
|
OCTET STRING,
|
|
nqaAdminExtPara35
|
|
OCTET STRING,
|
|
nqaAdminExtPara36
|
|
OCTET STRING,
|
|
nqaAdminExtPara37
|
|
OCTET STRING,
|
|
nqaAdminExtPara38
|
|
OCTET STRING,
|
|
nqaAdminExtPara39
|
|
OCTET STRING,
|
|
nqaAdminExtPara40
|
|
OCTET STRING,
|
|
nqaAdminExtPara41
|
|
OCTET STRING,
|
|
nqaAdminExtPara42
|
|
OCTET STRING,
|
|
nqaAdminExtPara43
|
|
OCTET STRING,
|
|
nqaAdminExtPara44
|
|
OCTET STRING,
|
|
nqaAdminExtPara45
|
|
OCTET STRING,
|
|
nqaAdminExtPara46
|
|
OCTET STRING,
|
|
nqaAdminExtPara47
|
|
OCTET STRING,
|
|
nqaAdminExtPara48
|
|
OCTET STRING,
|
|
nqaAdminExtPara49
|
|
OCTET STRING,
|
|
nqaAdminExtPara50
|
|
OCTET STRING
|
|
}
|
|
|
|
nqaAdminExtPara1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara2 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 1 }
|
|
|
|
nqaAdminExtPara2 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara1 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 2 }
|
|
|
|
nqaAdminExtPara3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara4 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 3 }
|
|
|
|
nqaAdminExtPara4 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara3 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 4 }
|
|
|
|
nqaAdminExtPara5 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara6 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 5 }
|
|
|
|
nqaAdminExtPara6 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara5 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 6 }
|
|
|
|
nqaAdminExtPara7 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara8 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 7 }
|
|
|
|
nqaAdminExtPara8 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara7 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 8 }
|
|
|
|
nqaAdminExtPara9 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara10 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 9 }
|
|
|
|
nqaAdminExtPara10 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara9 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 10 }
|
|
|
|
nqaAdminExtPara11 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara12 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 11 }
|
|
|
|
nqaAdminExtPara12 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara11 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 12 }
|
|
|
|
nqaAdminExtPara13 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara14 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 13 }
|
|
|
|
nqaAdminExtPara14 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara13 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 14 }
|
|
|
|
nqaAdminExtPara15 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara16 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 15 }
|
|
|
|
nqaAdminExtPara16 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara15 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 16 }
|
|
|
|
nqaAdminExtPara17 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara18 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 17 }
|
|
|
|
nqaAdminExtPara18 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara17 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 18 }
|
|
|
|
nqaAdminExtPara19 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara20 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 19 }
|
|
|
|
nqaAdminExtPara20 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara19 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 20 }
|
|
|
|
nqaAdminExtPara21 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara22 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 21 }
|
|
|
|
nqaAdminExtPara22 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara21 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 22 }
|
|
|
|
nqaAdminExtPara23 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara24 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 23 }
|
|
|
|
nqaAdminExtPara24 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara23 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 24 }
|
|
|
|
nqaAdminExtPara25 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara26 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 25 }
|
|
|
|
nqaAdminExtPara26 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara25 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 26 }
|
|
|
|
nqaAdminExtPara27 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara28 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 27 }
|
|
|
|
nqaAdminExtPara28 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara27 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 28 }
|
|
|
|
nqaAdminExtPara29 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara30 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 29 }
|
|
|
|
nqaAdminExtPara30 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara29 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 30 }
|
|
|
|
nqaAdminExtPara31 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara32 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 31 }
|
|
|
|
nqaAdminExtPara32 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara31 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 32 }
|
|
|
|
nqaAdminExtPara33 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara34 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 33 }
|
|
|
|
nqaAdminExtPara34 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara33 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 34 }
|
|
|
|
nqaAdminExtPara35 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara36 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 35 }
|
|
|
|
nqaAdminExtPara36 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara35 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 36 }
|
|
|
|
nqaAdminExtPara37 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara38 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 37 }
|
|
|
|
nqaAdminExtPara38 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara37 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 38 }
|
|
|
|
nqaAdminExtPara39 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara40 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 39 }
|
|
|
|
nqaAdminExtPara40 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara39 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 40 }
|
|
|
|
nqaAdminExtPara41 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara42 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 41 }
|
|
|
|
nqaAdminExtPara42 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara41 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 42 }
|
|
|
|
nqaAdminExtPara43 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara44 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 43 }
|
|
|
|
nqaAdminExtPara44 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara43 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 44 }
|
|
|
|
nqaAdminExtPara45 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara46 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 45 }
|
|
|
|
nqaAdminExtPara46 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara45 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 46 }
|
|
|
|
nqaAdminExtPara47 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara48 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 47 }
|
|
|
|
nqaAdminExtPara48 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara47 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 48 }
|
|
|
|
nqaAdminExtPara49 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description of the nqaAdminExtPara50 object.
|
|
The value is automatically assigned by the system after the type of the test case is ascertained."
|
|
::= { nqaAdminParaExtEntry 49 }
|
|
|
|
nqaAdminExtPara50 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is a configurable NQA parameter object.
|
|
Its value and meaning are assigned by the nqaAdminExtPara49 object after the test case is ascertained."
|
|
DEFVAL { 0 }
|
|
::= { nqaAdminParaExtEntry 50 }
|
|
|
|
nqaEthernetServiceParaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaEthernetServiceParaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Parameters about Y.1564 test parameters table."
|
|
::= { nqaCtrl 6 }
|
|
|
|
nqaEthernetServiceParaEntry OBJECT-TYPE
|
|
SYNTAX NqaEthernetServiceParaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Parameters about Y.1564 test parameters entry."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
|
|
::= { nqaEthernetServiceParaTable 1 }
|
|
|
|
NqaEthernetServiceParaEntry ::=
|
|
SEQUENCE {
|
|
nqaEthernetServiceParaFwdSimulationInboundIfIndex
|
|
InterfaceIndexOrZero,
|
|
nqaEthernetServiceParaOutboundIfIndex
|
|
InterfaceIndexOrZero,
|
|
nqaEthernetServiceParaConfigrationDuration
|
|
Unsigned32,
|
|
nqaEthernetServiceParaPerformanceDuration
|
|
Unsigned32,
|
|
nqaEthernetServiceParaPacketSizeValue
|
|
OCTET STRING (SIZE (0..64)),
|
|
nqaEthernetServiceParaTestFlowId
|
|
OCTET STRING (SIZE (0..127)),
|
|
nqaEthernetServiceParaPacketSizeProfile
|
|
INTEGER,
|
|
nqaEthernetServiceParaDisorderStatistics
|
|
INTEGER
|
|
}
|
|
|
|
nqaEthernetServiceParaFwdSimulationInboundIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the forwarding-simulation inbound interface."
|
|
DEFVAL { 0 }
|
|
::= { nqaEthernetServiceParaEntry 1 }
|
|
|
|
nqaEthernetServiceParaOutboundIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the outbound interface."
|
|
DEFVAL { 0 }
|
|
::= { nqaEthernetServiceParaEntry 2 }
|
|
|
|
nqaEthernetServiceParaConfigrationDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the duration of configration test."
|
|
DEFVAL { 3 }
|
|
::= { nqaEthernetServiceParaEntry 3 }
|
|
|
|
nqaEthernetServiceParaPerformanceDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the duration of performance test."
|
|
DEFVAL { 15 }
|
|
::= { nqaEthernetServiceParaEntry 4 }
|
|
|
|
nqaEthernetServiceParaPacketSizeValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the packet size.
|
|
The default value is 512."
|
|
::= { nqaEthernetServiceParaEntry 5 }
|
|
|
|
nqaEthernetServiceParaTestFlowId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the testflow id."
|
|
::= { nqaEthernetServiceParaEntry 6 }
|
|
|
|
nqaEthernetServiceParaPacketSizeProfile OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
default(0),
|
|
simpleImix(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the packet size mode, the default is 0."
|
|
DEFVAL { default }
|
|
::= { nqaEthernetServiceParaEntry 7}
|
|
|
|
nqaEthernetServiceParaDisorderStatistics OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(0),
|
|
disable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether enable packet disorder statistic,the default is disable(1)."
|
|
DEFVAL { disable }
|
|
::= { nqaEthernetServiceParaEntry 8}
|
|
|
|
nqaScheduleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaScheduleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: nqaScheduleTable describes test instance task scheduling. It implements scheduling of test instances to reduce device burden caused by concurrent tasks. The scheduling content includes the setting of the start time and end time of a single test instance. When several tasks are performed at the same time, the device properly arranges start time and test intervals.
|
|
Creation restrictions: None
|
|
Modification restrictions: The Read-create node can be modified when a test instance is in inactive state.
|
|
Deletion restrictions: None
|
|
Access restrictions: None "
|
|
::= { nqaCtrl 3 }
|
|
|
|
nqaScheduleEntry OBJECT-TYPE
|
|
SYNTAX NqaScheduleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set start-up in the nqaAdminParaTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
|
|
::= { nqaScheduleTable 1 }
|
|
|
|
NqaScheduleEntry ::=
|
|
SEQUENCE {
|
|
nqaScheduleStartType
|
|
INTEGER,
|
|
nqaScheduleStartTime
|
|
Unsigned32,
|
|
nqaScheduleEndType
|
|
INTEGER,
|
|
nqaScheduleEndTime
|
|
Unsigned32,
|
|
nqaScheduleAgeTime
|
|
Integer32,
|
|
nqaScheduleElapsedTime
|
|
TimeInterval,
|
|
nqaScheduleNumOfInitiations
|
|
Integer32,
|
|
nqaScheduleLastFinishIndex
|
|
Integer32,
|
|
nqaScheduleOperStatus
|
|
INTEGER,
|
|
nqaScheduleLastCollectIndex
|
|
Integer32
|
|
}
|
|
|
|
nqaScheduleStartType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
default(0),
|
|
startNow(1),
|
|
startAt(2),
|
|
startAfter(3),
|
|
startDaily(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the start type of the test instance. The object
|
|
is used together with nqaScheduleStartTime."
|
|
DEFVAL { default }
|
|
::= { nqaScheduleEntry 1 }
|
|
|
|
nqaScheduleStartTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the start time of the test instance. Setting
|
|
the value to 0 indicates to start the test instance
|
|
immediately. After configuring this object, the status
|
|
of the test instance is active, and the parameters of
|
|
the test instance cannot be changed."
|
|
::= { nqaScheduleEntry 2 }
|
|
|
|
nqaScheduleEndType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
default(0),
|
|
endAt(1),
|
|
endAfter(2),
|
|
endLifetime(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the end type of the test instance. The object
|
|
is used together with nqaScheduleEndTime."
|
|
DEFVAL { default }
|
|
::= { nqaScheduleEntry 3 }
|
|
|
|
nqaScheduleEndTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the end time of the test instance."
|
|
::= { nqaScheduleEntry 4 }
|
|
|
|
nqaScheduleAgeTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the aging time of the test instance, the time
|
|
how long the test instance will be reserved in NQA, after
|
|
the test instance is inactive. Setting the value to 0
|
|
indicates reserving the test instance eternally."
|
|
::= { nqaScheduleEntry 5 }
|
|
|
|
nqaScheduleElapsedTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The elapsed time (the period of time after task dispatch)."
|
|
::= { nqaScheduleEntry 6 }
|
|
|
|
nqaScheduleNumOfInitiations OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the times that the test instance has been initialed.
|
|
This object is used as the index of the result table, HTTP
|
|
statistics table, jitter statistics table, FTP statistics
|
|
table and history table."
|
|
::= { nqaScheduleEntry 7 }
|
|
|
|
nqaScheduleLastFinishIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the latest finished test of the test instance, which is used as the index of the result table."
|
|
::= { nqaScheduleEntry 8 }
|
|
|
|
nqaScheduleOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1),
|
|
stop(2),
|
|
restart(3),
|
|
active(4),
|
|
inactive(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the status of dispatching operation:
|
|
- reset: Clear all the records of the test instance.
|
|
- stop: Stop the test instance, if it's running.
|
|
- restart: Stop the test instance, if it's running,
|
|
and restart the test instance immediately.
|
|
- active: The test instance is running; the parameters
|
|
of the test instances cannot be changed.
|
|
- inactive: The test instance doesn't be scheduled;
|
|
the parameters of the test instances can be changed."
|
|
::= { nqaScheduleEntry 9 }
|
|
nqaScheduleLastCollectIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the index of the latest collection statistics
|
|
result record in the collection result table."
|
|
::= { nqaScheduleEntry 10 }
|
|
nqaGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set group for a test."
|
|
::= { nqaCtrl 4 }
|
|
|
|
nqaGroupEntry OBJECT-TYPE
|
|
SYNTAX NqaGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set parameters in the nqaGroupTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
|
|
::= { nqaGroupTable 1 }
|
|
|
|
NqaGroupEntry ::=
|
|
SEQUENCE {
|
|
nqaGroupStatusType
|
|
INTEGER,
|
|
nqaGroupPeriod
|
|
Integer32,
|
|
nqaGroupLeaderOwnerIndex
|
|
SnmpAdminString,
|
|
nqaGroupLeaderTestName
|
|
SnmpAdminString,
|
|
nqaGroupMemberNum
|
|
Integer32,
|
|
nqaGroupMemberFree
|
|
EnableValue
|
|
}
|
|
|
|
nqaGroupStatusType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
leader(2),
|
|
member(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the group status of the test instance. The
|
|
value can be normal (1), leader (2) or member (3)."
|
|
DEFVAL { normal }
|
|
::= { nqaGroupEntry 1 }
|
|
|
|
nqaGroupPeriod OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the interval during which all members in
|
|
the specified group will be executed."
|
|
DEFVAL { 60 }
|
|
::= { nqaGroupEntry 2 }
|
|
|
|
nqaGroupLeaderOwnerIndex OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the owner index of the group leader, if the
|
|
test instance is a member of the group."
|
|
::= { nqaGroupEntry 3 }
|
|
|
|
nqaGroupLeaderTestName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the test name of the group leader, if the
|
|
test instance is a member of the group."
|
|
::= { nqaGroupEntry 4 }
|
|
|
|
nqaGroupMemberNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of member in the group."
|
|
::= { nqaGroupEntry 5 }
|
|
|
|
nqaGroupMemberFree OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Free all members in the group."
|
|
::= { nqaGroupEntry 6 }
|
|
|
|
nqaServer OBJECT IDENTIFIER ::= { nqa 3 }
|
|
|
|
nqaServerEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables NQA server, which can be the echo server of TCP,
|
|
UDP and jitter type test instance."
|
|
::= { nqaServer 1 }
|
|
|
|
nqaTcpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaTcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of nqa tcp server
|
|
configuration information."
|
|
::= { nqaServer 2 }
|
|
|
|
nqaTcpServerEntry OBJECT-TYPE
|
|
SYNTAX NqaTcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of nqa tcp server
|
|
configuration information.
|
|
|
|
This entry is included not only the tcp server ip address
|
|
but also the tcp server tcp port. If used for VPN it is also
|
|
included the VPN name."
|
|
INDEX {
|
|
nqaTcpServerAddress,
|
|
nqaTcpServerPort,
|
|
nqaTcpServerVrfName
|
|
}
|
|
::= { nqaTcpServerTable 1 }
|
|
|
|
NqaTcpServerEntry ::=
|
|
SEQUENCE {
|
|
nqaTcpServerAddressType
|
|
InetAddressType,
|
|
nqaTcpServerAddress
|
|
InetAddress,
|
|
nqaTcpServerPort
|
|
InetPortNumber,
|
|
nqaTcpServerVrfName
|
|
DisplayString,
|
|
nqaTcpServerStatus
|
|
RowStatus
|
|
}
|
|
|
|
nqaTcpServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of TCP server."
|
|
DEFVAL { unknown }
|
|
::= { nqaTcpServerEntry 1 }
|
|
|
|
nqaTcpServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address of TCP server."
|
|
::= { nqaTcpServerEntry 2 }
|
|
|
|
nqaTcpServerPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the port number on which TCP server is listening."
|
|
::= { nqaTcpServerEntry 3 }
|
|
nqaTcpServerVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VRF (VPN Routing & Forwarding) instances name
|
|
of the TCP server."
|
|
::= { nqaTcpServerEntry 4 }
|
|
|
|
nqaTcpServerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operation of the TCP server, creating or deleting."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { nqaTcpServerEntry 5 }
|
|
|
|
nqaUdpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaUdpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: This table describes how to configure the NQA UDP service of the server, such as configuring a protocol, IP address, port number, and VRF.
|
|
Creation restrictions
|
|
The entries in this table can be created only when the indexes nqaUdpServerAddress, nqaUdpServerPort, and nqaUdpServerVrfName are specified.
|
|
The nqaUdpServerAddressType index value must be ipv4(1).
|
|
The nqaUdpServerStatus index value must be CreateAndGo (4).
|
|
|
|
Modification restrictions: The entries in this table cannot be modified.
|
|
|
|
Deletion restrictions
|
|
The entries in this table can be deleted. Indexes must be specified.
|
|
The nqaUdpServerStatus index value must be Destroy (6).
|
|
|
|
Access restrictions
|
|
The entries in this table can be accessed only when the nqaUdpServerStatus index value is active(1) or notInService(2)."
|
|
::= { nqaServer 3 }
|
|
|
|
nqaUdpServerEntry OBJECT-TYPE
|
|
SYNTAX NqaUdpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of nqa udp server
|
|
configuration information.
|
|
|
|
This entry is includeed not only the udp server ip address
|
|
but also the udp server udp port.If used for VPN it is also
|
|
included the VPN name."
|
|
INDEX {
|
|
nqaUdpServerAddress,
|
|
nqaUdpServerPort,
|
|
nqaUdpServerVrfName
|
|
}
|
|
::= { nqaUdpServerTable 1 }
|
|
|
|
NqaUdpServerEntry ::=
|
|
SEQUENCE {
|
|
nqaUdpServerAddressType
|
|
InetAddressType,
|
|
nqaUdpServerAddress
|
|
InetAddress,
|
|
nqaUdpServerPort
|
|
InetPortNumber,
|
|
nqaUdpServerVrfName
|
|
DisplayString,
|
|
nqaUdpServerStatus
|
|
RowStatus
|
|
}
|
|
|
|
nqaUdpServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of UDP server."
|
|
DEFVAL { unknown }
|
|
::= { nqaUdpServerEntry 1 }
|
|
|
|
nqaUdpServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address of UDP server."
|
|
::= { nqaUdpServerEntry 2 }
|
|
|
|
nqaUdpServerPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the port number on which UDP server is listening."
|
|
::= { nqaUdpServerEntry 3 }
|
|
nqaUdpServerVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VRF (VPN Routing & Forwarding) instances name
|
|
of the UDP server."
|
|
::= { nqaUdpServerEntry 4 }
|
|
|
|
nqaUdpServerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operation of the UDP server, creating or deleting."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { nqaUdpServerEntry 5 }
|
|
|
|
nqaIcmpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaIcmpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: This table describes how to configure the NQA ICMP service of the server, such as configuring a server, IP address, and VRF.
|
|
Creation restrictions
|
|
The entries in this table can be created only when the indexes nqaIcmpServerAddress and nqaUdpServerVrfName are specified.
|
|
The nqaIcmpServerAddressType index value must be ipv4(1).
|
|
The nqaIcmpServerStatus index value must be CreateAndGo (4).
|
|
|
|
Modification restrictions: The entries in this table cannot be modified.
|
|
|
|
Deletion restrictions
|
|
The entries in this table can be deleted. Indexes must be specified.
|
|
The nqaIcmpServerStatus index value must be 6(Destroy).
|
|
|
|
Access restrictions
|
|
If the nqaIcmpServerStatus value returned is active(1), the ICMP server is running. If the nqaIcmpServerStatus value returned is notInService(2), the ICMP server has stopped running."
|
|
::= { nqaServer 4 }
|
|
|
|
nqaIcmpServerEntry OBJECT-TYPE
|
|
SYNTAX NqaIcmpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of nqa ICMP server
|
|
configuration information.
|
|
|
|
This entry is included the ICMP server IP address.
|
|
If used for VPN it is also included the VPN name."
|
|
INDEX {
|
|
nqaIcmpServerAddress,
|
|
nqaIcmpServerVrfName
|
|
}
|
|
::= { nqaIcmpServerTable 1 }
|
|
|
|
NqaIcmpServerEntry ::=
|
|
SEQUENCE {
|
|
nqaIcmpServerAddress
|
|
InetAddress,
|
|
nqaIcmpServerVrfName
|
|
DisplayString,
|
|
nqaIcmpServerAddressType
|
|
InetAddressType,
|
|
nqaIcmpServerStatus
|
|
RowStatus
|
|
}
|
|
|
|
nqaIcmpServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address of ICMP server."
|
|
::= { nqaIcmpServerEntry 1 }
|
|
|
|
nqaIcmpServerVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VRF (VPN Routing & Forwarding) instances name
|
|
of the ICMP server."
|
|
::= { nqaIcmpServerEntry 2 }
|
|
|
|
|
|
nqaIcmpServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of ICMP server."
|
|
DEFVAL { unknown }
|
|
::= { nqaIcmpServerEntry 3 }
|
|
|
|
|
|
nqaIcmpServerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operation of the ICMP server, creating or deleting."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { nqaIcmpServerEntry 51 }
|
|
|
|
nqaRtpUdpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaRtpUdpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of nqa rtp-udp server
|
|
configuration information."
|
|
::= { nqaServer 5 }
|
|
|
|
nqaRtpUdpServerEntry OBJECT-TYPE
|
|
SYNTAX NqaRtpUdpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of nqa rtp-udp server
|
|
configuration information.
|
|
|
|
This entry is includeed not only the rtp-udp server ip address
|
|
but also the rtp-udp server udp port.If used for VPN it is also
|
|
included the VPN name."
|
|
INDEX {
|
|
nqaRtpUdpServerAddress,
|
|
nqaRtpUdpServerPort,
|
|
nqaRtpUdpServerVrfName
|
|
}
|
|
::= { nqaRtpUdpServerTable 1 }
|
|
|
|
NqaRtpUdpServerEntry ::=
|
|
SEQUENCE {
|
|
nqaRtpUdpServerAddressType
|
|
InetAddressType,
|
|
nqaRtpUdpServerAddress
|
|
InetAddress,
|
|
nqaRtpUdpServerPort
|
|
InetPortNumber,
|
|
nqaRtpUdpServerVrfName
|
|
DisplayString,
|
|
nqaRtpUdpServerStatus
|
|
RowStatus,
|
|
nqaRtpUdpServerSoftwareBased
|
|
EnabledStatus
|
|
}
|
|
|
|
nqaRtpUdpServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of rtp-udp server."
|
|
DEFVAL { unknown }
|
|
::= { nqaRtpUdpServerEntry 1 }
|
|
|
|
nqaRtpUdpServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address of rtp-udp server."
|
|
::= { nqaRtpUdpServerEntry 2 }
|
|
|
|
nqaRtpUdpServerPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the port number on which rtp-udp server is listening."
|
|
::= { nqaRtpUdpServerEntry 3 }
|
|
|
|
nqaRtpUdpServerVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VRF (VPN Routing & Forwarding) instances name
|
|
of the rtp-udp server."
|
|
::= { nqaRtpUdpServerEntry 4 }
|
|
|
|
nqaRtpUdpServerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the operation of the rtp-udp server, creating or deleting."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { nqaRtpUdpServerEntry 5 }
|
|
|
|
nqaRtpUdpServerSoftwareBased OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that the software-based test is enabled only when the test case type is rtptest.
|
|
(The value range: enable:1;disable:2.The default value is disable(2))"
|
|
::= { nqaRtpUdpServerEntry 6 }
|
|
|
|
-- BEGIN:nqa-rtp
|
|
nqaRtpTcpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaRtpTcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the status of nqa rtp-tcp server configurations."
|
|
::= { nqaServer 6 }
|
|
|
|
nqaRtpTcpServerEntry OBJECT-TYPE
|
|
SYNTAX NqaRtpTcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the status of nqa rtp-tcp server configurations.
|
|
|
|
This entry includes not only the rtp-tcp server ip address but also the rtp-tcp server udp port. If it is used for VPN, the VPN name is also included."
|
|
INDEX {
|
|
nqaRtpTcpServerAddress,
|
|
nqaRtpTcpServerPort,
|
|
nqaRtpTcpServerVrfName
|
|
}
|
|
::= { nqaRtpTcpServerTable 1 }
|
|
|
|
NqaRtpTcpServerEntry ::=
|
|
SEQUENCE {
|
|
nqaRtpTcpServerAddressType
|
|
InetAddressType,
|
|
nqaRtpTcpServerAddress
|
|
InetAddress,
|
|
nqaRtpTcpServerPort
|
|
InetPortNumber,
|
|
nqaRtpTcpServerVrfName
|
|
DisplayString,
|
|
nqaRtpTcpServerStatus
|
|
RowStatus
|
|
}
|
|
|
|
nqaRtpTcpServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address type of the rtp-tcp server."
|
|
DEFVAL { unknown }
|
|
::= { nqaRtpTcpServerEntry 1 }
|
|
|
|
nqaRtpTcpServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the address of the rtp-tcp server."
|
|
::= { nqaRtpTcpServerEntry 2 }
|
|
|
|
nqaRtpTcpServerPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the number of the port on which the rtp-tcp server is listening."
|
|
::= { nqaRtpTcpServerEntry 3 }
|
|
|
|
nqaRtpTcpServerVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VRF (VPN Routing & Forwarding) names of the rtp-tcp server."
|
|
::= { nqaRtpTcpServerEntry 4 }
|
|
|
|
nqaRtpTcpServerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether an rtp-tcp server is created or deleted."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { nqaRtpTcpServerEntry 5 }
|
|
-- END:nqa-rtp
|
|
|
|
nqaStats OBJECT IDENTIFIER ::= { nqa 4 }
|
|
|
|
nqaResultsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: This table describes result information of a test instance.
|
|
Creation restrictions: No entry can be created in this table.
|
|
Modification restrictions: The entries in this table cannot be modified.
|
|
Deletion restrictions: The entries in this table cannot be deleted.
|
|
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
|
|
A GET operation is performed.
|
|
The test instance type must be ICMP, UDP, or TCP.
|
|
The nqaResultsIndex and nqaResultsHopIndex values must be 0."
|
|
::= { nqaStats 1 }
|
|
|
|
nqaResultsEntry OBJECT-TYPE
|
|
SYNTAX NqaResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaResultsIndex, nqaResultsHopIndex }
|
|
::= { nqaResultsTable 1 }
|
|
|
|
NqaResultsEntry ::=
|
|
SEQUENCE {
|
|
nqaResultsIndex
|
|
Integer32,
|
|
nqaResultsHopIndex
|
|
Integer32,
|
|
nqaResultsCompletions
|
|
INTEGER,
|
|
nqaResultsTestAttempts
|
|
Counter32,
|
|
nqaResultsCurHopCount
|
|
Gauge32,
|
|
nqaResultsCurProbeCount
|
|
Gauge32,
|
|
nqaResultsRTDOverThresholds
|
|
Counter32,
|
|
nqaResultsSumCompletionTime
|
|
Counter32,
|
|
nqaResultsSumCompletionTime2Low
|
|
Counter32,
|
|
nqaResultsSumCompletionTime2High
|
|
Counter32,
|
|
nqaResultsCompletionTimeMin
|
|
Gauge32,
|
|
nqaResultsCompletionTimeMax
|
|
Gauge32,
|
|
nqaResultsDisconnects
|
|
Counter32,
|
|
nqaResultsTimeouts
|
|
Counter32,
|
|
nqaResultsBusies
|
|
Counter32,
|
|
nqaResultsNoConnections
|
|
Counter32,
|
|
nqaResultsSequenceErrors
|
|
Counter32,
|
|
nqaResultsDrops
|
|
Counter32,
|
|
nqaResultsAddressType
|
|
InetAddressType,
|
|
nqaResultsAddress
|
|
InetAddress,
|
|
nqaResultsProbeResponses
|
|
Counter32,
|
|
nqaResultsSentProbes
|
|
Counter32,
|
|
nqaResultsLastGoodProbe
|
|
DateAndTime,
|
|
nqaResultsLastGoodPath
|
|
DateAndTime,
|
|
nqaResultsTestFinished
|
|
INTEGER ,
|
|
nqaResultsRttAvg
|
|
Gauge32,
|
|
nqaResultsLostPacketRatio
|
|
Gauge32,
|
|
nqaResultsRingResponseNode
|
|
Gauge32,
|
|
nqaResultChangeRecord
|
|
DisplayString,
|
|
nqaResultsDetail
|
|
Unsigned32,
|
|
nqaResultsChangeToFailureTimes
|
|
Gauge32,
|
|
nqaResultsChangeToSuccessTimes
|
|
Gauge32,
|
|
nqaResultsChangeToNoResultTimes
|
|
Gauge32,
|
|
nqaResultsChangeToNegotiationFailureTimes
|
|
Gauge32,
|
|
nqaResultsChangeToAbnormalTimes
|
|
Gauge32,
|
|
nqaResultsFailureTimes
|
|
Gauge32,
|
|
nqaResultsSuccessTimes
|
|
Gauge32,
|
|
nqaResultsNoResultTimes
|
|
Gauge32,
|
|
nqaResultsNegotiationFailureTimes
|
|
Gauge32,
|
|
nqaResultsAbnormalTimes
|
|
Gauge32,
|
|
nqaResultsLastCompletions
|
|
INTEGER,
|
|
nqaResultsTestType
|
|
INTEGER,
|
|
nqaResultsSourceIP
|
|
DisplayString,
|
|
nqaResultsSourceIfName
|
|
DisplayString,
|
|
nqaResultsDestinationIP
|
|
DisplayString
|
|
}
|
|
|
|
nqaResultsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result table index and times of dispatching dependency tests.
|
|
Each test can only reserve 5 records. The result table only contains
|
|
icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. "
|
|
::= { nqaResultsEntry 1 }
|
|
|
|
nqaResultsHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1."
|
|
::= { nqaResultsEntry 2 }
|
|
|
|
nqaResultsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2),
|
|
negotiateFailed(3),
|
|
abnormal(5),
|
|
init(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaResultsEntry 3 }
|
|
|
|
nqaResultsTestAttempts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "tests"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of executing tests, which includes the times of successful execution,
|
|
failed execution and interruption (interrupted by human or system).
|
|
The current number of test attempts. The value of this object MUST be started at 0."
|
|
::= { nqaResultsEntry 4 }
|
|
|
|
nqaResultsCurHopCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "hops"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is equal to the hop count index executed
|
|
by current Traceroute or LSP Traceroute tests.
|
|
Ping/LSP Ping does not use this entry. The default value is 0."
|
|
::= { nqaResultsEntry 5 }
|
|
|
|
nqaResultsCurProbeCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "probes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total count of probe packets of Traceroute
|
|
or LSP Traceroute test in a hop count index."
|
|
::= { nqaResultsEntry 6 }
|
|
|
|
nqaResultsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of successful statistics test RTD (Round Trip Delay)
|
|
over the threshold."
|
|
::= { nqaResultsEntry 7 }
|
|
|
|
nqaResultsSumCompletionTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of RTT (response time) of all packets of each hop for executing Traceroute,
|
|
LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping,
|
|
lsp ping and disman-ping tests and so on."
|
|
::= { nqaResultsEntry 8 }
|
|
|
|
nqaResultsSumCompletionTime2Low OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of the accumulated squares
|
|
of completion times (in milliseconds) of NQA
|
|
operations which complete successfully.
|
|
|
|
Low/High order is defined where the binary number
|
|
will look as follows:
|
|
*************************************************
|
|
| High order 32 bits | Low order 32 bits |
|
|
*************************************************
|
|
For example the number 4294967296 would have all
|
|
Low order bits as '0' and the rightmost High
|
|
order bit will be 1 (zeros,1).
|
|
"
|
|
::= { nqaResultsEntry 9 }
|
|
|
|
nqaResultsSumCompletionTime2High OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of the accumulated squares
|
|
of completion times (in milliseconds) of NQA
|
|
operations which complete successfully.
|
|
|
|
See the nqaResultsSumCompletionTime2Low object
|
|
for a definition of Low/High Order.
|
|
"
|
|
::= { nqaResultsEntry 10 }
|
|
|
|
nqaResultsCompletionTimeMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum RTT (for Traceroute and LSP Traceroute,
|
|
it is the minimum RTT among all the packet of next hop) of all packets for executing a test. "
|
|
::= { nqaResultsEntry 11 }
|
|
|
|
nqaResultsCompletionTimeMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum RTT (for Traceroute and LSP Traceroute,
|
|
it is the maximum RTT among all the packets of next hop) of all packets in executing a test."
|
|
::= { nqaResultsEntry 12 }
|
|
|
|
nqaResultsDisconnects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of consecutive failures. For connectionless protocol type of test, this number should be zero."
|
|
::= { nqaResultsEntry 13 }
|
|
|
|
nqaResultsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation was not
|
|
completed before a timeout occurred, i.e.
|
|
nqaAdminCtrlTimeOut was exceeded."
|
|
::= { nqaResultsEntry 14 }
|
|
|
|
nqaResultsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of failure to apply resource due to the busy system.
|
|
such as apply memory or create socket failure."
|
|
::= { nqaResultsEntry 15 }
|
|
|
|
nqaResultsNoConnections OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation could not be
|
|
initiated because the connection to the target has not
|
|
been established. For all other nqaAdminCtrlType this
|
|
object will remain zero.
|
|
|
|
This cannot occur for connectionless protocols, but may
|
|
occur for connection oriented protocols, such as TCP.
|
|
|
|
Since a NQA operation was never initiated, the completion
|
|
time of these operations are not accumulated, nor do they
|
|
increment nqaResultsCompletions.
|
|
"
|
|
::= { nqaResultsEntry 16 }
|
|
|
|
nqaResultsSequenceErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of NQA operation completions received with
|
|
an unexpected sequence identifier. For all other values
|
|
of nqaAdminCtrlType this object will remain zero.
|
|
|
|
When this has occurred some of the possible reasons maybe:
|
|
- a duplicate packet was received
|
|
- a response was received after it had timed-out
|
|
- a corrupted packet was received and was not detected
|
|
"
|
|
::= { nqaResultsEntry 17 }
|
|
|
|
nqaResultsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times probes of the test dropped due to sending or connecting failure."
|
|
::= { nqaResultsEntry 18 }
|
|
|
|
nqaResultsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type, and the value range can be unknown(0),
|
|
ipv4(1) and dns(16)."
|
|
::= { nqaResultsEntry 19 }
|
|
|
|
nqaResultsAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address (TraceRoute is the destination address of each hop,
|
|
and ping is the destination address of tests)."
|
|
::= { nqaResultsEntry 20 }
|
|
|
|
nqaResultsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "responses"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of responses received for the corresponding
|
|
test. The value of this object
|
|
MUST be reported as 0 when no probe responses have been
|
|
received."
|
|
::= { nqaResultsEntry 21 }
|
|
|
|
nqaResultsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "probes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object reflects the number of probes sent
|
|
for the corresponding test.
|
|
The value of this object MUST be reported as 0 when no probes
|
|
have been sent."
|
|
::= { nqaResultsEntry 22 }
|
|
|
|
nqaResultsLastGoodProbe OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Date and time when the last response was received for a probe."
|
|
::= { nqaResultsEntry 23 }
|
|
|
|
nqaResultsLastGoodPath OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the last complete path was determined."
|
|
::= { nqaResultsEntry 24 }
|
|
|
|
nqaResultsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(0),
|
|
finish(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaResultsEntry 25 }
|
|
|
|
nqaResultsRttAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaResultsEntry 26}
|
|
|
|
nqaResultsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaResultsEntry 27 }
|
|
|
|
nqaResultsRingResponseNode OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ring response node ID, invalid value of 0."
|
|
::= { nqaResultsEntry 28 }
|
|
|
|
nqaResultChangeRecord OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangePackedNotification."
|
|
::= { nqaResultsEntry 29 }
|
|
|
|
nqaResultsChangeToFailureTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 31 }
|
|
|
|
nqaResultsChangeToSuccessTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 32 }
|
|
|
|
nqaResultsChangeToNoResultTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 33 }
|
|
|
|
nqaResultsChangeToNegotiationFailureTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 34 }
|
|
|
|
nqaResultsChangeToAbnormalTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 35 }
|
|
|
|
nqaResultsFailureTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 36 }
|
|
|
|
nqaResultsSuccessTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 37 }
|
|
|
|
nqaResultsNoResultTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 38 }
|
|
|
|
nqaResultsNegotiationFailureTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 39 }
|
|
|
|
nqaResultsAbnormalTimes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Records result change information for nqaResultsTestResultChangeNotification."
|
|
::= { nqaResultsEntry 40 }
|
|
|
|
nqaResultsLastCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2),
|
|
negotiateFailed(3),
|
|
abnormal(5),
|
|
init(255)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaResultsEntry 41 }
|
|
|
|
nqaResultsTestType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcp(1),
|
|
udp(2),
|
|
jitter(5),
|
|
icmp(6),
|
|
snmp(7),
|
|
trace(8),
|
|
dns(11),
|
|
pwe3ping(14),
|
|
pwe3trace(15),
|
|
macping(18),
|
|
icmpjitter(22),
|
|
vplsping(26),
|
|
vplspwping(32),
|
|
vplspwtrace(33)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test type."
|
|
::= { nqaResultsEntry 42}
|
|
|
|
nqaResultsSourceIP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source IP."
|
|
::= { nqaResultsEntry 43}
|
|
|
|
nqaResultsSourceIfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source interface name."
|
|
::= { nqaResultsEntry 44}
|
|
|
|
nqaResultsDestinationIP OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destiation IP."
|
|
::= { nqaResultsEntry 45}
|
|
|
|
nqaHTTPStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaHTTPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection database.
|
|
Defines the HTTP Operations Statistics Table for
|
|
storing the statistics of a HTTP test."
|
|
::= { nqaStats 2 }
|
|
|
|
nqaHTTPStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaHTTPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the nqaHTTPStatsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHTTPStatsIndex }
|
|
::= { nqaHTTPStatsTable 1 }
|
|
|
|
NqaHTTPStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaHTTPStatsIndex
|
|
Integer32,
|
|
nqaHTTPStatsCompletions
|
|
INTEGER,
|
|
nqaHTTPStatsRTDOverThresholds
|
|
Counter32,
|
|
nqaHTTPStatsRTTSum
|
|
Counter32,
|
|
nqaHTTPStatsRTTMin
|
|
Gauge32,
|
|
nqaHTTPStatsRTTMax
|
|
Gauge32,
|
|
nqaHTTPStatsDNSRTTSum
|
|
Counter32,
|
|
nqaHTTPStatsDNSRTTMin
|
|
Gauge32,
|
|
nqaHTTPStatsDNSRTTMax
|
|
Gauge32,
|
|
nqaHTTPStatsTCPConnectRTTSum
|
|
Counter32,
|
|
nqaHTTPStatsTCPConnectRTTMin
|
|
Gauge32,
|
|
nqaHTTPStatsTCPConnectRTTMax
|
|
Gauge32,
|
|
nqaHTTPStatsTransactionRTTSum
|
|
Counter32,
|
|
nqaHTTPStatsTransactionRTTMin
|
|
Gauge32,
|
|
nqaHTTPStatsTransactionRTTMax
|
|
Gauge32,
|
|
nqaHTTPStatsMessageBodyOctetsSum
|
|
Counter32,
|
|
nqaHTTPStatsDNSServerTimeouts
|
|
Counter32,
|
|
nqaHTTPStatsTCPConnectTimeouts
|
|
Counter32,
|
|
nqaHTTPStatsTransactionTimeouts
|
|
Counter32,
|
|
nqaHTTPStatsDNSQueryErrors
|
|
Counter32,
|
|
nqaHTTPStatsErrors
|
|
Counter32,
|
|
nqaHTTPStatsTcpConnErrors
|
|
Counter32,
|
|
nqaHTTPStatsProbeResponses
|
|
Counter32,
|
|
nqaHTTPStatsSendProbes
|
|
Counter32,
|
|
nqaHTTPStatsBusies
|
|
Counter32,
|
|
nqaHTTPStatsTestFinished
|
|
INTEGER,
|
|
nqaHTTPStatsRttAvg
|
|
Gauge32,
|
|
nqaHTTPStatsLostPacketRatio
|
|
Gauge32
|
|
}
|
|
|
|
nqaHTTPStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The The HTTP statistics table index and times of dispatching dependency tests."
|
|
::= { nqaHTTPStatsEntry 1 }
|
|
|
|
nqaHTTPStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of HTTP test."
|
|
::= { nqaHTTPStatsEntry 2 }
|
|
|
|
nqaHTTPStatsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of HTTP operations RTD (Round Trip Delay) that violate threshold."
|
|
::= { nqaHTTPStatsEntry 3 }
|
|
|
|
nqaHTTPStatsRTTSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of delay time of successful HTTP probes, including the sum of time of DNS query,
|
|
TCP establishment and packets transmission."
|
|
::= { nqaHTTPStatsEntry 4 }
|
|
|
|
nqaHTTPStatsRTTMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value of HTTP probe time."
|
|
::= { nqaHTTPStatsEntry 5 }
|
|
|
|
nqaHTTPStatsRTTMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of HTTP probe time."
|
|
::= { nqaHTTPStatsEntry 6 }
|
|
|
|
nqaHTTPStatsDNSRTTSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of DNS query time."
|
|
::= { nqaHTTPStatsEntry 7 }
|
|
|
|
nqaHTTPStatsDNSRTTMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of DNS query time."
|
|
::= { nqaHTTPStatsEntry 8 }
|
|
|
|
nqaHTTPStatsDNSRTTMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of DNS query time."
|
|
::= { nqaHTTPStatsEntry 9 }
|
|
|
|
nqaHTTPStatsTCPConnectRTTSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of TCP connection time."
|
|
::= { nqaHTTPStatsEntry 10 }
|
|
|
|
nqaHTTPStatsTCPConnectRTTMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value of TCP connection time."
|
|
::= { nqaHTTPStatsEntry 11 }
|
|
|
|
nqaHTTPStatsTCPConnectRTTMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of TCP connection time."
|
|
::= { nqaHTTPStatsEntry 12 }
|
|
|
|
nqaHTTPStatsTransactionRTTSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of transaction time."
|
|
::= { nqaHTTPStatsEntry 13 }
|
|
|
|
nqaHTTPStatsTransactionRTTMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value of transaction time."
|
|
::= { nqaHTTPStatsEntry 14 }
|
|
|
|
nqaHTTPStatsTransactionRTTMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of transaction time."
|
|
::= { nqaHTTPStatsEntry 15 }
|
|
|
|
nqaHTTPStatsMessageBodyOctetsSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of the size of the message body received as a
|
|
response to the HTTP request."
|
|
::= { nqaHTTPStatsEntry 16 }
|
|
|
|
|
|
nqaHTTPStatsDNSServerTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of requests that timed out during DNS query."
|
|
::= { nqaHTTPStatsEntry 17 }
|
|
|
|
nqaHTTPStatsTCPConnectTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of requests that timed out during HTTP connection."
|
|
::= { nqaHTTPStatsEntry 18 }
|
|
|
|
nqaHTTPStatsTransactionTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of requests that timed out during HTTP transaction."
|
|
::= { nqaHTTPStatsEntry 19 }
|
|
|
|
nqaHTTPStatsDNSQueryErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of requests that had DNS query errors."
|
|
::= { nqaHTTPStatsEntry 20 }
|
|
|
|
nqaHTTPStatsErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of HTTP transaction failures."
|
|
::= { nqaHTTPStatsEntry 21 }
|
|
|
|
nqaHTTPStatsTcpConnErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of TCP connection failures."
|
|
::= { nqaHTTPStatsEntry 22 }
|
|
|
|
nqaHTTPStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of responses received for the corresponding test. The value of this object
|
|
MUST be reported as 0 when no probe responses have been received."
|
|
::= { nqaHTTPStatsEntry 23 }
|
|
|
|
nqaHTTPStatsSendProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sending probes."
|
|
::= { nqaHTTPStatsEntry 24 }
|
|
|
|
nqaHTTPStatsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a HTTP operation could not
|
|
be initiated because an internal error."
|
|
::= { nqaHTTPStatsEntry 25 }
|
|
|
|
nqaHTTPStatsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(0),
|
|
finish(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaHTTPStatsEntry 26 }
|
|
|
|
nqaHTTPStatsRttAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaHTTPStatsEntry 27}
|
|
|
|
nqaHTTPStatsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaHTTPStatsEntry 28 }
|
|
|
|
nqaJitterStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaJitterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: nqaJitterStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection.
|
|
Creation restrictions: No entry can be created in this table.
|
|
Modification restrictions: The entries in this table cannot be modified.
|
|
Deletion restrictions: The entries in this table cannot be deleted.
|
|
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
|
|
A GET operation is performed.
|
|
The test instance type must be ICMP, UDP, or TCP."
|
|
::= { nqaStats 3 }
|
|
|
|
nqaJitterStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaJitterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of latest Jitter operation.
|
|
This entry is created only if the nqaAdminCtrlType is jitterAppl."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterStatsIndex }
|
|
::= { nqaJitterStatsTable 1 }
|
|
|
|
NqaJitterStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaJitterStatsIndex
|
|
Integer32,
|
|
nqaJitterStatsCompletions
|
|
INTEGER,
|
|
nqaJitterStatsRTDOverThresholds
|
|
Counter32,
|
|
nqaJitterStatsNumOfRTT
|
|
Counter32,
|
|
nqaJitterStatsRTTSum
|
|
Counter32,
|
|
nqaJitterStatsRTTSum2Low
|
|
Counter32,
|
|
nqaJitterStatsRTTSum2High
|
|
Counter32,
|
|
nqaJitterStatsRTTMin
|
|
Gauge32,
|
|
nqaJitterStatsRTTMax
|
|
Gauge32,
|
|
nqaJitterStatsMinOfPositivesSD
|
|
Gauge32,
|
|
nqaJitterStatsMaxOfPositivesSD
|
|
Gauge32,
|
|
nqaJitterStatsNumOfPositivesSD
|
|
Counter32,
|
|
nqaJitterStatsSumOfPositivesSD
|
|
Counter32,
|
|
nqaJitterStatsSum2OfPositivesSDLow
|
|
Counter32,
|
|
nqaJitterStatsSum2OfPositivesSDHigh
|
|
Counter32,
|
|
nqaJitterStatsMinOfNegativesSD
|
|
Gauge32,
|
|
nqaJitterStatsMaxOfNegativesSD
|
|
Gauge32,
|
|
nqaJitterStatsNumOfNegativesSD
|
|
Counter32,
|
|
nqaJitterStatsSumOfNegativesSD
|
|
Counter32,
|
|
nqaJitterStatsSum2OfNegativesSDLow
|
|
Counter32,
|
|
nqaJitterStatsSum2OfNegativesSDHigh
|
|
Counter32,
|
|
nqaJitterStatsMinOfPositivesDS
|
|
Gauge32,
|
|
nqaJitterStatsMaxOfPositivesDS
|
|
Gauge32,
|
|
nqaJitterStatsNumOfPositivesDS
|
|
Counter32,
|
|
nqaJitterStatsSumOfPositivesDS
|
|
Counter32,
|
|
nqaJitterStatsSum2OfPositivesDSLow
|
|
Counter32,
|
|
nqaJitterStatsSum2OfPositivesDSHigh
|
|
Counter32,
|
|
nqaJitterStatsMinOfNegativesDS
|
|
Gauge32,
|
|
nqaJitterStatsMaxOfNegativesDS
|
|
Gauge32,
|
|
nqaJitterStatsNumOfNegativesDS
|
|
Counter32,
|
|
nqaJitterStatsSumOfNegativesDS
|
|
Counter32,
|
|
nqaJitterStatsSum2OfNegativesDSLow
|
|
Counter32,
|
|
nqaJitterStatsSum2OfNegativesDSHigh
|
|
Counter32,
|
|
nqaJitterStatsPacketLossSD
|
|
Counter32,
|
|
nqaJitterStatsPacketLossDS
|
|
Counter32,
|
|
nqaJitterStatsPacketOutOfSequences
|
|
Counter32,
|
|
nqaJitterStatsErrors
|
|
Counter32,
|
|
nqaJitterStatsBusies
|
|
Counter32,
|
|
nqaJitterStatsTimeouts
|
|
Counter32,
|
|
nqaJitterStatsProbeResponses
|
|
Counter32,
|
|
nqaJitterStatsSentProbes
|
|
Counter32,
|
|
nqaJitterStatsDrops
|
|
Counter32,
|
|
nqaJitterStatsTestFinished
|
|
INTEGER,
|
|
nqaJitterStatsMaxDelaySD
|
|
Gauge32,
|
|
nqaJitterStatsMaxDelayDS
|
|
Gauge32,
|
|
nqaJitterStatsRTTAvg
|
|
Gauge32,
|
|
nqaJitterStatsPacketLossRatio
|
|
Gauge32,
|
|
nqaJitterStatsAvgJitter
|
|
Gauge32,
|
|
nqaJitterStatsAvgJitterSD
|
|
Gauge32,
|
|
nqaJitterStatsAvgJitterDS
|
|
Gauge32,
|
|
nqaJitterStatsJitterOut
|
|
OCTET STRING,
|
|
nqaJitterStatsJitterIn
|
|
OCTET STRING,
|
|
nqaJitterStatsOWDOverThresholdsSD
|
|
Counter32,
|
|
nqaJitterStatsPktLossUnknown
|
|
Counter32,
|
|
nqaJitterStatsNumOfOWD
|
|
Counter32,
|
|
nqaJitterStatsOWSumSD
|
|
Counter32,
|
|
nqaJitterStatsOWSumDS
|
|
Counter32,
|
|
nqaJitterStatsOWDOverThresholdsDS
|
|
Counter32,
|
|
nqaJitterStatsOperOfIcpif
|
|
Gauge32,
|
|
nqaJitterStatsOperOfMos
|
|
Gauge32,
|
|
nqaJitterStatsMinDelaySD
|
|
Gauge32,
|
|
nqaJitterStatsSum2DelaySDLow
|
|
Gauge32,
|
|
nqaJitterStatsSum2DelaySDHigh
|
|
Counter32,
|
|
nqaJitterStatsMinDelayDS
|
|
Gauge32,
|
|
nqaJitterStatsSum2DelayDSLow
|
|
Gauge32,
|
|
nqaJitterStatsSum2DelayDSHigh
|
|
Counter32,
|
|
nqaJitterStatsTimeUnit
|
|
INTEGER,
|
|
nqaJitterStatsAvgDelaySD
|
|
Gauge32,
|
|
nqaJitterStatsAvgDelayDS
|
|
Gauge32,
|
|
nqaJitterStatsPktRewriteNum
|
|
Counter32,
|
|
nqaJitterStatsPktRewriteRatio
|
|
Gauge32,
|
|
nqaJitterStatsPktDisorderNum
|
|
Counter32,
|
|
nqaJitterStatsPktDisorderRatio
|
|
Gauge32,
|
|
nqaJitterStatsFragPktDisorderNum
|
|
Counter32,
|
|
nqaJitterStatsFragPktDisorderRatio
|
|
Gauge32,
|
|
nqaJitterStatsJitterOverThresholdsSD
|
|
Counter32,
|
|
nqaJitterStatsJitterOverThresholdsDS
|
|
Counter32,
|
|
nqaJitterStatsOverallOverThresholds
|
|
Counter32,
|
|
nqaJitterStatsStartTime
|
|
Unsigned32,
|
|
nqaJitterStatsEndTime
|
|
Unsigned32,
|
|
nqaJitterStatsResultDetail
|
|
Unsigned32
|
|
}
|
|
|
|
nqaJitterStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third index of jitter statistics table."
|
|
::= { nqaJitterStatsEntry 1 }
|
|
|
|
nqaJitterStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2),
|
|
negotiateFailed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the test, which value can be noResult (0),
|
|
success (1), failure (2) or negotiateFailed (3). If the test is still running,
|
|
the value will be noResult (0)."
|
|
::= { nqaJitterStatsEntry 2 }
|
|
|
|
nqaJitterStatsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate RTD (Round Trip Delay) threshold."
|
|
::= { nqaJitterStatsEntry 3 }
|
|
|
|
nqaJitterStatsNumOfRTT OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RTTs that are successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 4 }
|
|
|
|
nqaJitterStatsRTTSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of RTTs that are successfully measured."
|
|
::= { nqaJitterStatsEntry 5 }
|
|
|
|
nqaJitterStatsRTTSum2Low OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of RTTs that are successfully measured by
|
|
tests (low order 32 bits)."
|
|
::= { nqaJitterStatsEntry 6 }
|
|
|
|
nqaJitterStatsRTTSum2High OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of RTTs that are successfully measured by
|
|
tests (high order 32 bits)."
|
|
::= { nqaJitterStatsEntry 7 }
|
|
|
|
nqaJitterStatsRTTMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 8 }
|
|
|
|
nqaJitterStatsRTTMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 9 }
|
|
|
|
nqaJitterStatsMinOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all positive jitter values from source to destination."
|
|
::= { nqaJitterStatsEntry 10 }
|
|
|
|
nqaJitterStatsMaxOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all positive jitter values from source to destination."
|
|
::= { nqaJitterStatsEntry 11 }
|
|
|
|
nqaJitterStatsNumOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all positive jitter values from source to destination."
|
|
::= { nqaJitterStatsEntry 12 }
|
|
|
|
nqaJitterStatsSumOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all positive jitter values from source to destination."
|
|
::= { nqaJitterStatsEntry 13 }
|
|
|
|
nqaJitterStatsSum2OfPositivesSDLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter values
|
|
from source to destination (low order 32 bits)."
|
|
::= { nqaJitterStatsEntry 14 }
|
|
|
|
nqaJitterStatsSum2OfPositivesSDHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter values
|
|
from source to destination (high order 32 bits)."
|
|
::= { nqaJitterStatsEntry 15 }
|
|
|
|
nqaJitterStatsMinOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all negative jitter values from
|
|
source to destination."
|
|
::= { nqaJitterStatsEntry 16 }
|
|
|
|
nqaJitterStatsMaxOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all negative jitter values from
|
|
source to destination."
|
|
::= { nqaJitterStatsEntry 17 }
|
|
|
|
nqaJitterStatsNumOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all negative jitter values from source to destination."
|
|
::= { nqaJitterStatsEntry 18 }
|
|
|
|
nqaJitterStatsSumOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all negative jitter values from source
|
|
to destination."
|
|
::= { nqaJitterStatsEntry 19 }
|
|
|
|
nqaJitterStatsSum2OfNegativesSDLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values from source
|
|
to destination (low order 32 bits)."
|
|
::= { nqaJitterStatsEntry 20 }
|
|
|
|
nqaJitterStatsSum2OfNegativesSDHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values from source to
|
|
destination (high order 32 bits)."
|
|
::= { nqaJitterStatsEntry 21 }
|
|
|
|
nqaJitterStatsMinOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all positive jitter values from destination
|
|
to source."
|
|
::= { nqaJitterStatsEntry 22 }
|
|
|
|
nqaJitterStatsMaxOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all positive jitter values from destination
|
|
to source."
|
|
::= { nqaJitterStatsEntry 23 }
|
|
|
|
nqaJitterStatsNumOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all positive jitter values from destination to source."
|
|
::= { nqaJitterStatsEntry 24 }
|
|
|
|
nqaJitterStatsSumOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all positive jitter values from destination
|
|
to source."
|
|
::= { nqaJitterStatsEntry 25 }
|
|
|
|
nqaJitterStatsSum2OfPositivesDSLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter values from
|
|
destination to source (low order 32 bits)."
|
|
::= { nqaJitterStatsEntry 26 }
|
|
|
|
nqaJitterStatsSum2OfPositivesDSHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter values from
|
|
destination to source (high order 32 bits)."
|
|
::= { nqaJitterStatsEntry 27 }
|
|
|
|
nqaJitterStatsMinOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all negative jitter values from
|
|
destination to source."
|
|
::= { nqaJitterStatsEntry 28 }
|
|
|
|
nqaJitterStatsMaxOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all negative jitter values from
|
|
destination to source."
|
|
::= { nqaJitterStatsEntry 29 }
|
|
|
|
nqaJitterStatsNumOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all negative jitter values from destination to source."
|
|
::= { nqaJitterStatsEntry 30 }
|
|
|
|
nqaJitterStatsSumOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all negative jitter values from destination
|
|
to source."
|
|
::= { nqaJitterStatsEntry 31 }
|
|
|
|
nqaJitterStatsSum2OfNegativesDSLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values from destination
|
|
to source (low order 32 bits)."
|
|
::= { nqaJitterStatsEntry 32 }
|
|
|
|
nqaJitterStatsSum2OfNegativesDSHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values from destination
|
|
to source (high order 32 bits)."
|
|
::= { nqaJitterStatsEntry 33 }
|
|
|
|
nqaJitterStatsPacketLossSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets lost when sent from source to destination."
|
|
::= { nqaJitterStatsEntry 34 }
|
|
|
|
nqaJitterStatsPacketLossDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets lost when sent from destination to source."
|
|
::= { nqaJitterStatsEntry 35 }
|
|
|
|
nqaJitterStatsPacketOutOfSequences OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets arrived out of sequence."
|
|
::= { nqaJitterStatsEntry 36 }
|
|
|
|
nqaJitterStatsErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of errors occurred in the test."
|
|
::= { nqaJitterStatsEntry 37 }
|
|
|
|
nqaJitterStatsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a test couldn't be initialized
|
|
because the previous test has not completed."
|
|
::= { nqaJitterStatsEntry 38 }
|
|
|
|
nqaJitterStatsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of responses arrived over the time."
|
|
::= { nqaJitterStatsEntry 39 }
|
|
|
|
nqaJitterStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of responses from echo-server for the packets sent
|
|
by the test."
|
|
::= { nqaJitterStatsEntry 40 }
|
|
|
|
nqaJitterStatsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets sent in the test."
|
|
::= { nqaJitterStatsEntry 41 }
|
|
|
|
nqaJitterStatsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that were sent failed in the test."
|
|
::= { nqaJitterStatsEntry 42 }
|
|
|
|
nqaJitterStatsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(0),
|
|
finish(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the test, which value can be noFinish (0) or finish (1)."
|
|
::= { nqaJitterStatsEntry 43 }
|
|
|
|
nqaJitterStatsMaxDelaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay) from source to destination."
|
|
::= { nqaJitterStatsEntry 44 }
|
|
|
|
nqaJitterStatsMaxDelayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay) from destination to source."
|
|
::= { nqaJitterStatsEntry 45 }
|
|
|
|
nqaJitterStatsRTTAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 46 }
|
|
|
|
nqaJitterStatsPacketLossRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaJitterStatsEntry 47 }
|
|
|
|
nqaJitterStatsAvgJitter OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values that were successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 48 }
|
|
|
|
nqaJitterStatsAvgJitterSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values from source to destination that were
|
|
successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 49 }
|
|
|
|
nqaJitterStatsAvgJitterDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values from destination to source that were
|
|
successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 50 }
|
|
|
|
nqaJitterStatsJitterOut OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Jitter (RFC1889) at responder."
|
|
::= { nqaJitterStatsEntry 51 }
|
|
|
|
nqaJitterStatsJitterIn OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Jitter (RFC1889) at sender."
|
|
::= { nqaJitterStatsEntry 52 }
|
|
|
|
nqaJitterStatsOWDOverThresholdsSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate OWD (One Way Delay) threshold from
|
|
source to destination."
|
|
::= { nqaJitterStatsEntry 53 }
|
|
|
|
nqaJitterStatsPktLossUnknown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets lost for which we cannot determine the direction."
|
|
::= { nqaJitterStatsEntry 54 }
|
|
nqaJitterStatsNumOfOWD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OWDs that were successfully measured by tests."
|
|
::= { nqaJitterStatsEntry 55 }
|
|
nqaJitterStatsOWSumSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of OWDs that were successfully measured by tests from source
|
|
to destination."
|
|
::= { nqaJitterStatsEntry 56 }
|
|
nqaJitterStatsOWSumDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of OWDs that were successfully measured by tests from
|
|
destination to source."
|
|
::= { nqaJitterStatsEntry 57 }
|
|
nqaJitterStatsOWDOverThresholdsDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate OWD (One Way Delay) threshold
|
|
from destination to source."
|
|
::= { nqaJitterStatsEntry 58 }
|
|
|
|
nqaJitterStatsOperOfIcpif OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICPIF (Calculated Planning Impairment Factor) value for the latest
|
|
jitter test."
|
|
::= { nqaJitterStatsEntry 59 }
|
|
|
|
nqaJitterStatsOperOfMos OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MOS (Mean Opinion Score) value for the latest jitter test. "
|
|
::= { nqaJitterStatsEntry 60}
|
|
|
|
nqaJitterStatsMinDelaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of all one way time from source to destination."
|
|
::= { nqaJitterStatsEntry 61 }
|
|
|
|
nqaJitterStatsSum2DelaySDLow OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of the sum of squares of one way
|
|
time from source to destination."
|
|
::= { nqaJitterStatsEntry 62 }
|
|
|
|
nqaJitterStatsSum2DelaySDHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of the sum of squares of one
|
|
way time from source to destination."
|
|
::= { nqaJitterStatsEntry 63 }
|
|
|
|
nqaJitterStatsMinDelayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of all one way time from destination to source."
|
|
::= { nqaJitterStatsEntry 64 }
|
|
|
|
nqaJitterStatsSum2DelayDSLow OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of the sum of squares of one way time
|
|
from destination to source."
|
|
::= { nqaJitterStatsEntry 65 }
|
|
|
|
nqaJitterStatsSum2DelayDSHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of the sum of squares of one way time from destination to source."
|
|
::= { nqaJitterStatsEntry 66 }
|
|
|
|
nqaJitterStatsTimeUnit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
us(1), -- The unit of the timestamp is us
|
|
ms(2) -- The unit of the timestamp is ms
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit of the timestamp, ms or us."
|
|
::= { nqaJitterStatsEntry 67 }
|
|
|
|
nqaJitterStatsAvgDelaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of one way time from source to destination."
|
|
::= { nqaJitterStatsEntry 68 }
|
|
|
|
nqaJitterStatsAvgDelayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of one way time from destination to source."
|
|
::= { nqaJitterStatsEntry 69 }
|
|
|
|
nqaJitterStatsPktRewriteNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets have been rewrited."
|
|
::= { nqaJitterStatsEntry 70 }
|
|
|
|
nqaJitterStatsPktRewriteRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of packets have been rewrited."
|
|
::= { nqaJitterStatsEntry 71 }
|
|
|
|
nqaJitterStatsPktDisorderNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets have been disordered."
|
|
::= { nqaJitterStatsEntry 72 }
|
|
|
|
nqaJitterStatsPktDisorderRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of packets have been disordered."
|
|
::= { nqaJitterStatsEntry 73 }
|
|
|
|
nqaJitterStatsFragPktDisorderNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets whose fragments have been disordered."
|
|
::= { nqaJitterStatsEntry 74 }
|
|
|
|
nqaJitterStatsFragPktDisorderRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of packets whose fragments have been disordered."
|
|
::= { nqaJitterStatsEntry 75 }
|
|
|
|
nqaJitterStatsJitterOverThresholdsSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate jitter threshold from
|
|
source to destination."
|
|
::= { nqaJitterStatsEntry 76 }
|
|
|
|
nqaJitterStatsJitterOverThresholdsDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate jitter threshold from
|
|
destination to source."
|
|
::= { nqaJitterStatsEntry 77 }
|
|
|
|
nqaJitterStatsOverallOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that overall violate jitter threshold."
|
|
::= { nqaJitterStatsEntry 78 }
|
|
|
|
nqaJitterStatsStartTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time when the Jitter test started."
|
|
::= { nqaJitterStatsEntry 79 }
|
|
|
|
nqaJitterStatsEndTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time when the Jitter test ended."
|
|
::= { nqaJitterStatsEntry 80 }
|
|
|
|
nqaJitterStatsResultDetail OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates detailed result information about the test instance."
|
|
::= { nqaJitterStatsEntry 81 }
|
|
|
|
nqaFTPStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaFTPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection database.
|
|
Defines the FTP Operations Statistics Table for
|
|
storing the statistics of a FTP test.
|
|
"
|
|
::= { nqaStats 4 }
|
|
|
|
|
|
nqaFTPStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaFTPStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the nqaFTPStatsTable. "
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaFTPStatsIndex }
|
|
::= { nqaFTPStatsTable 1 }
|
|
|
|
NqaFTPStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaFTPStatsIndex
|
|
Integer32,
|
|
nqaFTPStatsCompletions
|
|
INTEGER,
|
|
nqaFTPStatsRTDOverThresholds
|
|
Counter32,
|
|
nqaFTPStatsCtrlConnMaxTime
|
|
Gauge32,
|
|
nqaFTPStatsCtrlConnMinTime
|
|
Gauge32,
|
|
nqaFTPStatsCtrlConnAveTime
|
|
Gauge32,
|
|
nqaFTPStatsDataConnMaxTime
|
|
Gauge32,
|
|
nqaFTPStatsDataConnMinTime
|
|
Gauge32,
|
|
nqaFTPStatsDataConnAveTime
|
|
Gauge32,
|
|
nqaFTPStatsConnectSumTimeMax
|
|
Gauge32,
|
|
nqaFTPStatsConnectSumTimeMin
|
|
Gauge32,
|
|
nqaFTPStatsConnectSumTimeAve
|
|
Gauge32,
|
|
nqaFTPStatsMessageBodyOctetsSum
|
|
Counter32,
|
|
nqaFTPStatsErrors
|
|
Counter32,
|
|
nqaFTPStatsTimeouts
|
|
Counter32,
|
|
nqaFTPStatsDiscontinued
|
|
Counter32,
|
|
nqaFTPStatsProbeResponses
|
|
Counter32,
|
|
nqaFTPStatsSendProbes
|
|
Counter32,
|
|
nqaFTPStatsTestFinished
|
|
INTEGER,
|
|
nqaFTPStatsRttAvg
|
|
Gauge32,
|
|
nqaFTPStatsLostPacketRatio
|
|
Gauge32
|
|
}
|
|
|
|
nqaFTPStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FTP statistics table index and times of dispatching dependency tests."
|
|
::= { nqaFTPStatsEntry 1 }
|
|
|
|
nqaFTPStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of FTP test."
|
|
::= { nqaFTPStatsEntry 2 }
|
|
|
|
nqaFTPStatsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of successful statistics test RTD (Round Trip Delay) over the threshold."
|
|
::= { nqaFTPStatsEntry 3 }
|
|
|
|
nqaFTPStatsCtrlConnMaxTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of the control connection time."
|
|
::= { nqaFTPStatsEntry 4 }
|
|
|
|
nqaFTPStatsCtrlConnMinTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value of the control connection time."
|
|
::= { nqaFTPStatsEntry 5 }
|
|
|
|
nqaFTPStatsCtrlConnAveTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average value of the control connection time."
|
|
::= { nqaFTPStatsEntry 6 }
|
|
|
|
nqaFTPStatsDataConnMaxTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of the data connection time."
|
|
::= { nqaFTPStatsEntry 7 }
|
|
|
|
nqaFTPStatsDataConnMinTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value of the data connection time."
|
|
::= { nqaFTPStatsEntry 8 }
|
|
|
|
nqaFTPStatsDataConnAveTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average value of the data connection time."
|
|
::= { nqaFTPStatsEntry 9 }
|
|
|
|
nqaFTPStatsConnectSumTimeMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of the FTP probe time."
|
|
::= { nqaFTPStatsEntry 10 }
|
|
|
|
nqaFTPStatsConnectSumTimeMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mininum value of the FTP probe time."
|
|
::= { nqaFTPStatsEntry 11 }
|
|
|
|
nqaFTPStatsConnectSumTimeAve OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average value of the FTP probe time."
|
|
::= { nqaFTPStatsEntry 12 }
|
|
|
|
nqaFTPStatsMessageBodyOctetsSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The accumulated octets of a FTP test."
|
|
::= { nqaFTPStatsEntry 13 }
|
|
|
|
|
|
|
|
nqaFTPStatsErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of some other errors."
|
|
::= { nqaFTPStatsEntry 14 }
|
|
|
|
nqaFTPStatsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a FTP operation was not
|
|
completed before a timeout occurred, i.e.
|
|
nqaAdminCtrlTimeOut was exceeded."
|
|
::= { nqaFTPStatsEntry 15 }
|
|
|
|
nqaFTPStatsDiscontinued OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a FTP test was interrupted by the user."
|
|
::= { nqaFTPStatsEntry 16 }
|
|
|
|
nqaFTPStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of responses received for the corresponding test. The value of this object
|
|
MUST be reported as 0 when no probe responses have been received."
|
|
::= { nqaFTPStatsEntry 17 }
|
|
|
|
nqaFTPStatsSendProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sending probe"
|
|
::= { nqaFTPStatsEntry 18 }
|
|
|
|
nqaFTPStatsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(0),
|
|
finish(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaFTPStatsEntry 19 }
|
|
|
|
nqaFTPStatsRttAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaFTPStatsEntry 20}
|
|
|
|
nqaFTPStatsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaFTPStatsEntry 21 }
|
|
|
|
nqaMpingStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaMpingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection database.
|
|
Defines the Mping Operations Statistics Table for
|
|
storing the statistics of a Mping test."
|
|
::= { nqaStats 5 }
|
|
|
|
nqaMpingStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaMpingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the nqaMpingStatsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMpingStatsIndex ,nqaMpingStatsReceiverIndex }
|
|
::= { nqaMpingStatsTable 1 }
|
|
|
|
NqaMpingStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaMpingStatsIndex
|
|
Integer32,
|
|
nqaMpingStatsReceiverIndex
|
|
Integer32,
|
|
nqaMpingStatsTargetAddressType
|
|
InetAddressType,
|
|
nqaMpingStatsTargetAddress
|
|
InetAddress,
|
|
nqaMpingStatsReceiverAddress
|
|
InetAddress,
|
|
nqaMpingStatsCompletions
|
|
INTEGER,
|
|
nqaMpingStatsRTDOverThresholds
|
|
Counter32,
|
|
nqaMpingStatsSumCompletionTime
|
|
Counter32,
|
|
nqaMpingStatsSumCompletionTime2Low
|
|
Counter32,
|
|
nqaMpingStatsSumCompletionTime2High
|
|
Counter32,
|
|
nqaMpingStatsCompletionTimeMin
|
|
Gauge32,
|
|
nqaMpingStatsCompletionTimeMax
|
|
Gauge32,
|
|
nqaMpingStatsTimeouts
|
|
Counter32,
|
|
nqaMpingStatsBusies
|
|
Counter32,
|
|
nqaMpingStatsSequenceErrors
|
|
Counter32,
|
|
nqaMpingStatsDrops
|
|
Counter32,
|
|
nqaMpingStatsProbeResponses
|
|
Counter32,
|
|
nqaMpingStatsSentProbes
|
|
Counter32,
|
|
nqaMpingStatsLastGoodProbe
|
|
DateAndTime,
|
|
nqaMpingStatsTestFinished
|
|
INTEGER,
|
|
nqaMpingStatsReceiverCount
|
|
Gauge32,
|
|
nqaMpingStatsLastFibHit
|
|
TruthValue,
|
|
nqaMpingStatsRttAvg
|
|
Gauge32,
|
|
nqaMpingStatsLostPacketRatio
|
|
Gauge32
|
|
}
|
|
|
|
nqaMpingStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of mping statistics table, and the times of dispatching dependency tests."
|
|
::= { nqaMpingStatsEntry 1 }
|
|
|
|
nqaMpingStatsReceiverIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of receiver ,that received the mping request packet and response the reply packet ."
|
|
::= { nqaMpingStatsEntry 2 }
|
|
|
|
nqaMpingStatsTargetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type, and the value range can be unknown(0),
|
|
ipv4(1) and dns(16)."
|
|
::= { nqaMpingStatsEntry 3 }
|
|
|
|
nqaMpingStatsTargetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address ."
|
|
::= { nqaMpingStatsEntry 4 }
|
|
|
|
nqaMpingStatsReceiverAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of mping receiver"
|
|
::= { nqaMpingStatsEntry 5 }
|
|
|
|
nqaMpingStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(1),
|
|
success(2),
|
|
failure(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaMpingStatsEntry 6 }
|
|
|
|
nqaMpingStatsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of successful statistics test RTD (Round Trip Delay) over
|
|
the threshold."
|
|
::= { nqaMpingStatsEntry 7 }
|
|
|
|
nqaMpingStatsSumCompletionTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of RTT (response time) of sent packets."
|
|
::= { nqaMpingStatsEntry 8 }
|
|
|
|
nqaMpingStatsSumCompletionTime2Low OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of the sum of squares of RTT (response time)
|
|
for each packet of test execution. "
|
|
::= { nqaMpingStatsEntry 9 }
|
|
|
|
nqaMpingStatsSumCompletionTime2High OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of the sum of squares
|
|
of RTT (response time) for each packet of test execution. "
|
|
::= { nqaMpingStatsEntry 10 }
|
|
|
|
nqaMpingStatsCompletionTimeMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum RTT of all packets for executing a test. "
|
|
::= { nqaMpingStatsEntry 11 }
|
|
|
|
nqaMpingStatsCompletionTimeMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum RTT of all packets in executing a test. "
|
|
::= { nqaMpingStatsEntry 12 }
|
|
|
|
nqaMpingStatsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation was not completed before a timeout occurred,
|
|
i.e. nqaAdminCtrlTimeOut was exceeded."
|
|
::= { nqaMpingStatsEntry 13 }
|
|
|
|
nqaMpingStatsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of failure to apply resource due to the busy system.
|
|
such as apply memory or create socket failure."
|
|
::= { nqaMpingStatsEntry 14 }
|
|
|
|
nqaMpingStatsSequenceErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times that sequence error happends."
|
|
::= { nqaMpingStatsEntry 15 }
|
|
|
|
nqaMpingStatsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times probes of the test dropped due to sending or connecting failure . "
|
|
::= { nqaMpingStatsEntry 16 }
|
|
|
|
|
|
nqaMpingStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received response packets."
|
|
::= { nqaMpingStatsEntry 17 }
|
|
|
|
nqaMpingStatsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sent packets."
|
|
::= { nqaMpingStatsEntry 18 }
|
|
|
|
nqaMpingStatsLastGoodProbe OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Date and time when the last response was received for a probe."
|
|
::= { nqaMpingStatsEntry 19 }
|
|
|
|
nqaMpingStatsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(1),
|
|
finish(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaMpingStatsEntry 20 }
|
|
|
|
nqaMpingStatsReceiverCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current serial number of receivers."
|
|
::= { nqaMpingStatsEntry 21 }
|
|
|
|
nqaMpingStatsLastFibHit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the fib is hit on the device when receiving the last packet."
|
|
::= {nqaMpingStatsEntry 22}
|
|
|
|
nqaMpingStatsRttAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaMpingStatsEntry 23}
|
|
|
|
nqaMpingStatsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaMpingStatsEntry 24 }
|
|
|
|
nqaMtracertStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaMtracertStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection database.
|
|
Defines the Mping Operations Statistics Table for
|
|
storing the statistics of a Mping test."
|
|
::= { nqaStats 6 }
|
|
|
|
|
|
nqaMtracertStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaMtracertStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertStatsIndex, nqaMtracertStatsHopIndex }
|
|
::= { nqaMtracertStatsTable 1 }
|
|
|
|
NqaMtracertStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaMtracertStatsIndex
|
|
Integer32,
|
|
nqaMtracertStatsHopIndex
|
|
Integer32,
|
|
nqaMtracertStatsAddressType
|
|
InetAddressType,
|
|
nqaMtracertStatsAddress
|
|
InetAddress,
|
|
nqaMtracertStatsCompletions
|
|
INTEGER,
|
|
nqaMtracertStatsCurHopCount
|
|
Gauge32,
|
|
nqaMtracertStatsCurProbeCount
|
|
Gauge32,
|
|
nqaMtracertStatsRTDOverThresholds
|
|
Counter32,
|
|
nqaMtracertStatsTimeouts
|
|
Counter32,
|
|
nqaMtracertStatsBusies
|
|
Counter32,
|
|
nqaMtracertStatsSequenceErrors
|
|
Counter32,
|
|
nqaMtracertStatsDrops
|
|
Counter32,
|
|
nqaMtracertStatsProbeResponses
|
|
Counter32,
|
|
nqaMtracertStatsSentProbes
|
|
Counter32,
|
|
nqaMtracertStatsLastGoodProbe
|
|
DateAndTime,
|
|
nqaMtracertStatsLastGoodPath
|
|
DateAndTime,
|
|
nqaMtracertStatsTestFinished
|
|
INTEGER,
|
|
nqaMtracertStatsCurPathTTL
|
|
Gauge32,
|
|
nqaMtracertStatsMaxPathTTL
|
|
Gauge32,
|
|
nqaMtracertStatsInPkgLossRate
|
|
Gauge32,
|
|
nqaMtracertStatsSGPkgLossRate
|
|
Gauge32,
|
|
nqaMtracertStatsInPkgRate
|
|
Gauge32,
|
|
nqaMtracertStatsOutPkgRate
|
|
Gauge32,
|
|
nqaMtracertStatsTimeDelay
|
|
Gauge32
|
|
}
|
|
|
|
nqaMtracertStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of mping statistics table, and the times of dispatching dependency tests."
|
|
::= { nqaMtracertStatsEntry 1 }
|
|
|
|
nqaMtracertStatsHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of Mtracert hop "
|
|
::= { nqaMtracertStatsEntry 2 }
|
|
|
|
nqaMtracertStatsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16)."
|
|
::= { nqaMtracertStatsEntry 3 }
|
|
|
|
nqaMtracertStatsAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address
|
|
(TraceRoute is the source address of the last valuable response package)."
|
|
::= { nqaMtracertStatsEntry 4 }
|
|
|
|
|
|
nqaMtracertStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(1),
|
|
success(2),
|
|
failure(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaMtracertStatsEntry 5 }
|
|
|
|
nqaMtracertStatsCurHopCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is equal to the hop count index executed
|
|
by current tests. The default value is 0."
|
|
::= { nqaMtracertStatsEntry 6 }
|
|
|
|
nqaMtracertStatsCurProbeCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total count of probe packets in a hop count index."
|
|
::= { nqaMtracertStatsEntry 7 }
|
|
|
|
nqaMtracertStatsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of successful statistics test RTD (Round Trip Delay) over the threshold."
|
|
::= { nqaMtracertStatsEntry 8 }
|
|
|
|
|
|
nqaMtracertStatsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation was not completed before a timeout occurred,
|
|
i.e. nqaAdminCtrlTimeOut was exceeded."
|
|
::= { nqaMtracertStatsEntry 9}
|
|
|
|
nqaMtracertStatsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of failure to apply resource due to the busy system.
|
|
such as apply memory or create socket failure."
|
|
::= { nqaMtracertStatsEntry 10 }
|
|
|
|
nqaMtracertStatsSequenceErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times that sequence error happends."
|
|
::= { nqaMtracertStatsEntry 11 }
|
|
|
|
nqaMtracertStatsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times probes of the test dropped due to sending or connecting failure . "
|
|
::= { nqaMtracertStatsEntry 12 }
|
|
|
|
|
|
nqaMtracertStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received response packets."
|
|
::= { nqaMtracertStatsEntry 13 }
|
|
|
|
nqaMtracertStatsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sent packets."
|
|
::= { nqaMtracertStatsEntry 14 }
|
|
|
|
nqaMtracertStatsLastGoodProbe OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Date and time when the last response was received for a probe."
|
|
::= { nqaMtracertStatsEntry 15 }
|
|
|
|
nqaMtracertStatsLastGoodPath OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the last complete path was determined."
|
|
::= { nqaMtracertStatsEntry 16 }
|
|
|
|
nqaMtracertStatsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(1),
|
|
finish(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaMtracertStatsEntry 17 }
|
|
|
|
nqaMtracertStatsCurPathTTL OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TTL(time to live) of the current path. "
|
|
::= { nqaMtracertStatsEntry 18 }
|
|
|
|
nqaMtracertStatsMaxPathTTL OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum TTL(time to live) of the path. "
|
|
::= { nqaMtracertStatsEntry 19 }
|
|
|
|
nqaMtracertStatsInPkgLossRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The loss rate of the incoming packets."
|
|
::= { nqaMtracertStatsEntry 20 }
|
|
|
|
nqaMtracertStatsSGPkgLossRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The loss rate of the packets from source to multicast group."
|
|
::= { nqaMtracertStatsEntry 21}
|
|
|
|
nqaMtracertStatsInPkgRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of incoming packets."
|
|
::= { nqaMtracertStatsEntry 22 }
|
|
|
|
nqaMtracertStatsOutPkgRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of outgoing packets."
|
|
::= { nqaMtracertStatsEntry 23 }
|
|
|
|
nqaMtracertStatsTimeDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time delay of packets from hop to hop."
|
|
::= { nqaMtracertStatsEntry 24 }
|
|
|
|
nqaPathMtuStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaPathMtuStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection database.
|
|
Defines the path MTU Operations Statistics Table for
|
|
storing the statistics of a path MTU test."
|
|
::= { nqaStats 7 }
|
|
|
|
nqaPathMtuStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaPathMtuStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the nqaPathMtuStatsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathMtuStatsIndex }
|
|
::= { nqaPathMtuStatsTable 1 }
|
|
|
|
NqaPathMtuStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaPathMtuStatsIndex
|
|
Integer32,
|
|
nqaPathMtuStatsAddressType
|
|
InetAddressType,
|
|
nqaPathMtuStatsAddress
|
|
InetAddress,
|
|
nqaPathMtuStatsCompletions
|
|
INTEGER,
|
|
nqaPathMtuStatsSentProbes
|
|
Counter32,
|
|
nqaPathMtuStatsProbeResponses
|
|
Counter32,
|
|
nqaPathMtuStatsDiscoveryPathMtuMin
|
|
Gauge32,
|
|
nqaPathMtuStatsDiscoveryPathMtuMax
|
|
Gauge32,
|
|
nqaPathMtuStatsOptimumFirstStep
|
|
Gauge32,
|
|
nqaPathMtuStatsBusies
|
|
Counter32,
|
|
nqaPathMtuStatsTimeouts
|
|
Counter32,
|
|
nqaPathMtuStatsDrops
|
|
Counter32,
|
|
nqaPathMtuStatsPathMtu
|
|
Gauge32,
|
|
nqaPathMtuStatsTestFinished
|
|
INTEGER
|
|
}
|
|
|
|
nqaPathMtuStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of path MTU statistics table, and the times
|
|
of dispatching dependency tests."
|
|
::= { nqaPathMtuStatsEntry 1 }
|
|
|
|
nqaPathMtuStatsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16)."
|
|
::= { nqaPathMtuStatsEntry 2 }
|
|
|
|
nqaPathMtuStatsAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address.
|
|
It is the source address of the ICMP echo reply packet."
|
|
::= { nqaPathMtuStatsEntry 3 }
|
|
|
|
|
|
nqaPathMtuStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaPathMtuStatsEntry 4 }
|
|
|
|
nqaPathMtuStatsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sent packets."
|
|
::= { nqaPathMtuStatsEntry 5 }
|
|
|
|
nqaPathMtuStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received response packets."
|
|
::= { nqaPathMtuStatsEntry 6 }
|
|
|
|
nqaPathMtuStatsDiscoveryPathMtuMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initial length of packet in the path MTU test.
|
|
It is the minimal length of a ICMP packet."
|
|
::= { nqaPathMtuStatsEntry 7 }
|
|
|
|
nqaPathMtuStatsDiscoveryPathMtuMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximal length of packet in the path MTU test.
|
|
It is the maximal MTU of local out-interface."
|
|
::= { nqaPathMtuStatsEntry 8 }
|
|
|
|
nqaPathMtuStatsOptimumFirstStep OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The optimum first step of the path MTU test.
|
|
It will take effect if the specified step is lower than it."
|
|
::= { nqaPathMtuStatsEntry 9 }
|
|
|
|
nqaPathMtuStatsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of failure to apply resource due to the busy system.
|
|
such as apply memory or create socket failure."
|
|
::= { nqaPathMtuStatsEntry 10 }
|
|
|
|
nqaPathMtuStatsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation was not completed before a timeout occurred,
|
|
i.e. nqaAdminCtrlTimeOut was exceeded."
|
|
::= { nqaPathMtuStatsEntry 11 }
|
|
|
|
nqaPathMtuStatsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times probes of the test dropped due to sending or connecting failure."
|
|
::= { nqaPathMtuStatsEntry 12 }
|
|
|
|
nqaPathMtuStatsPathMtu OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of current path MTU."
|
|
::= { nqaPathMtuStatsEntry 13 }
|
|
|
|
nqaPathMtuStatsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nofinish(0),
|
|
finish(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaPathMtuStatsEntry 14 }
|
|
|
|
nqaPathJitterStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaPathJitterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of latest path jitter operation."
|
|
::= { nqaStats 8 }
|
|
|
|
nqaPathJitterStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaPathJitterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of latest path jitter operation.
|
|
This entry is created only if the nqaAdminCtrlType is path jitter."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathJitterStatsIndex, nqaPathJitterStatsHopIndex }
|
|
::= { nqaPathJitterStatsTable 1 }
|
|
|
|
NqaPathJitterStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaPathJitterStatsIndex
|
|
Integer32,
|
|
nqaPathJitterStatsHopIndex
|
|
Integer32,
|
|
nqaPathJitterStatsCompletions
|
|
INTEGER,
|
|
nqaPathJitterStatsAddressType
|
|
InetAddressType,
|
|
nqaPathJitterStatsAddress
|
|
InetAddress,
|
|
nqaPathJitterStatsRtdOverThresholds
|
|
Counter32,
|
|
nqaPathJitterStatsNumOfRtt
|
|
Counter32,
|
|
nqaPathJitterStatsRttSum
|
|
Counter32,
|
|
nqaPathJitterStatsRttSum2Low
|
|
Counter32,
|
|
nqaPathJitterStatsRttSum2High
|
|
Counter32,
|
|
nqaPathJitterStatsRttMin
|
|
Gauge32,
|
|
nqaPathJitterStatsRttMax
|
|
Gauge32,
|
|
nqaPathJitterStatsMinOfPositivesSD
|
|
Gauge32,
|
|
nqaPathJitterStatsMaxOfPositivesSD
|
|
Gauge32,
|
|
nqaPathJitterStatsNumOfPositivesSD
|
|
Counter32,
|
|
nqaPathJitterStatsSumOfPositivesSD
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfPositivesSDLow
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfPositivesSDHigh
|
|
Counter32,
|
|
nqaPathJitterStatsMinOfNegativesSD
|
|
Gauge32,
|
|
nqaPathJitterStatsMaxOfNegativesSD
|
|
Gauge32,
|
|
nqaPathJitterStatsNumOfNegativesSD
|
|
Counter32,
|
|
nqaPathJitterStatsSumOfNegativesSD
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfNegativesSDLow
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfNegativesSDHigh
|
|
Counter32,
|
|
nqaPathJitterStatsMinOfPositivesDS
|
|
Gauge32,
|
|
nqaPathJitterStatsMaxOfPositivesDS
|
|
Gauge32,
|
|
nqaPathJitterStatsNumOfPositivesDS
|
|
Counter32,
|
|
nqaPathJitterStatsSumOfPositivesDS
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfPositivesDSLow
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfPositivesDSHigh
|
|
Counter32,
|
|
nqaPathJitterStatsMinOfNegativesDS
|
|
Gauge32,
|
|
nqaPathJitterStatsMaxOfNegativesDS
|
|
Gauge32,
|
|
nqaPathJitterStatsNumOfNegativesDS
|
|
Counter32,
|
|
nqaPathJitterStatsSumOfNegativesDS
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfNegativesDSLow
|
|
Counter32,
|
|
nqaPathJitterStatsSum2OfNegativesDSHigh
|
|
Counter32,
|
|
nqaPathJitterStatsPacketLossSD
|
|
Counter32,
|
|
nqaPathJitterStatsPacketLossDS
|
|
Counter32,
|
|
nqaPathJitterStatsPacketOutOfSequences
|
|
Counter32,
|
|
nqaPathJitterStatsErrors
|
|
Counter32,
|
|
nqaPathJitterStatsBusies
|
|
Counter32,
|
|
nqaPathJitterStatsTimeouts
|
|
Counter32,
|
|
nqaPathJitterStatsProbeResponses
|
|
Counter32,
|
|
nqaPathJitterStatsSentProbes
|
|
Counter32,
|
|
nqaPathJitterStatsDrops
|
|
Counter32,
|
|
nqaPathJitterStatsTestFinished
|
|
INTEGER,
|
|
nqaPathJitterStatsMaxDelaySD
|
|
Gauge32,
|
|
nqaPathJitterStatsMaxDelayDS
|
|
Gauge32,
|
|
nqaPathJitterStatsRttAvg
|
|
Gauge32,
|
|
nqaPathJitterStatsPacketLossRatio
|
|
Gauge32,
|
|
nqaPathJitterStatsAvgJitter
|
|
Gauge32,
|
|
nqaPathJitterStatsAvgJitterSD
|
|
Gauge32,
|
|
nqaPathJitterStatsAvgJitterDS
|
|
Gauge32,
|
|
nqaPathJitterStatsJitterOut
|
|
OCTET STRING,
|
|
nqaPathJitterStatsJitterIn
|
|
OCTET STRING,
|
|
nqaPathJitterStatsOwdOverThresholdsSD
|
|
Counter32,
|
|
nqaPathJitterStatsPktLossUnknown
|
|
Counter32,
|
|
nqaPathJitterStatsNumOfOwd
|
|
Counter32,
|
|
nqaPathJitterStatsOwdSumSD
|
|
Counter32,
|
|
nqaPathJitterStatsOwdSumDS
|
|
Counter32,
|
|
nqaPathJitterStatsOwdOverThresholdsDS
|
|
Counter32
|
|
}
|
|
|
|
nqaPathJitterStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of path jitter statistics table, and the times of dispatching dependency tests."
|
|
::= { nqaPathJitterStatsEntry 1 }
|
|
|
|
nqaPathJitterStatsHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of path jitter hop."
|
|
::= { nqaPathJitterStatsEntry 2 }
|
|
|
|
nqaPathJitterStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 3 }
|
|
|
|
nqaPathJitterStatsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type in a hop of path jitter test,
|
|
and the value range can be unknown(0), ipv4(1) and dns(16)."
|
|
::= { nqaPathJitterStatsEntry 4 }
|
|
|
|
nqaPathJitterStatsAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 5 }
|
|
|
|
nqaPathJitterStatsRtdOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of successful executions who's RTD over the threshold in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 6 }
|
|
|
|
nqaPathJitterStatsNumOfRtt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times that statistics RTT successfully in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 7 }
|
|
|
|
nqaPathJitterStatsRttSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of RTTs in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 8 }
|
|
|
|
nqaPathJitterStatsRttSum2Low OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 9 }
|
|
|
|
nqaPathJitterStatsRttSum2High OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 10 }
|
|
|
|
nqaPathJitterStatsRttMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of RTTs that successfully measured in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 11 }
|
|
|
|
nqaPathJitterStatsRttMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of RTTs that successfully measured in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 12 }
|
|
|
|
nqaPathJitterStatsMinOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of positive values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 13 }
|
|
|
|
nqaPathJitterStatsMaxOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of positive values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 14 }
|
|
|
|
nqaPathJitterStatsNumOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of positive values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 15 }
|
|
|
|
nqaPathJitterStatsSumOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of positive values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 16 }
|
|
|
|
nqaPathJitterStatsSum2OfPositivesSDLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of square sum of positive values of jitter that
|
|
measured from packets sent from source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 17 }
|
|
|
|
nqaPathJitterStatsSum2OfPositivesSDHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of square sum of positive values of jitter that
|
|
measured from packets sent from source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 18 }
|
|
|
|
nqaPathJitterStatsMinOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of negative values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 19 }
|
|
|
|
nqaPathJitterStatsMaxOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of negative values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 20 }
|
|
|
|
nqaPathJitterStatsNumOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of negative values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 21 }
|
|
|
|
nqaPathJitterStatsSumOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of negative values of jitter that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 22 }
|
|
|
|
nqaPathJitterStatsSum2OfNegativesSDLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of square sum of negative values of jitter that
|
|
measured from packets sent from source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 23 }
|
|
|
|
nqaPathJitterStatsSum2OfNegativesSDHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of square sum of negative values of jitter that
|
|
measured from packets sent from source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 24 }
|
|
|
|
nqaPathJitterStatsMinOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of positive values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 25 }
|
|
|
|
nqaPathJitterStatsMaxOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of positive values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 26 }
|
|
|
|
nqaPathJitterStatsNumOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of positive values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 27 }
|
|
|
|
nqaPathJitterStatsSumOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of positive values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 28 }
|
|
|
|
nqaPathJitterStatsSum2OfPositivesDSLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of square sum of positive values of jitter that
|
|
measured from packets sent from destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 29 }
|
|
|
|
nqaPathJitterStatsSum2OfPositivesDSHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of square sum of positive values of jitter that
|
|
measured from packets sent from destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 30 }
|
|
|
|
nqaPathJitterStatsMinOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of negative values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 31 }
|
|
|
|
nqaPathJitterStatsMaxOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of negative values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 32 }
|
|
|
|
nqaPathJitterStatsNumOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of negative values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 33 }
|
|
|
|
nqaPathJitterStatsSumOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of negative values of jitter that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 34 }
|
|
|
|
nqaPathJitterStatsSum2OfNegativesDSLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of square sum of negative values of jitter that
|
|
measured from packets sent from destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 35 }
|
|
|
|
nqaPathJitterStatsSum2OfNegativesDSHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of square sum of negative values of jitter that
|
|
measured from packets sent from destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 36 }
|
|
|
|
nqaPathJitterStatsPacketLossSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of dropped packets sent from source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 37 }
|
|
|
|
nqaPathJitterStatsPacketLossDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of dropped packets sent from destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 38 }
|
|
|
|
nqaPathJitterStatsPacketOutOfSequences OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that return out of sequence."
|
|
::= { nqaPathJitterStatsEntry 39 }
|
|
|
|
nqaPathJitterStatsErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of some other errors type."
|
|
::= { nqaPathJitterStatsEntry 40 }
|
|
|
|
nqaPathJitterStatsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a path jitter operation could
|
|
not be initiated because an internal error."
|
|
::= { nqaPathJitterStatsEntry 41 }
|
|
|
|
nqaPathJitterStatsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation was not completed
|
|
before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded."
|
|
::= { nqaPathJitterStatsEntry 42 }
|
|
|
|
nqaPathJitterStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of responses received for the corresponding test.
|
|
The value of this object MUST be reported as 0 when no probe responses have been received."
|
|
::= { nqaPathJitterStatsEntry 43 }
|
|
|
|
nqaPathJitterStatsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object reflects the number of packets sent for the corresponding test.
|
|
The value of this object MUST be reported as 0 when no probes have been sent."
|
|
::= { nqaPathJitterStatsEntry 44 }
|
|
|
|
nqaPathJitterStatsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times probes of the test dropped due to sending failure."
|
|
::= { nqaPathJitterStatsEntry 45 }
|
|
|
|
nqaPathJitterStatsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(0),
|
|
finish(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaPathJitterStatsEntry 46 }
|
|
|
|
nqaPathJitterStatsMaxDelaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay)
|
|
that measured from packets sent from source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 47 }
|
|
|
|
nqaPathJitterStatsMaxDelayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay)
|
|
that measured from packets sent from destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 48 }
|
|
|
|
nqaPathJitterStatsRttAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 49 }
|
|
|
|
nqaPathJitterStatsPacketLossRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 50 }
|
|
|
|
nqaPathJitterStatsAvgJitter OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values that were successfully measured in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 51 }
|
|
|
|
nqaPathJitterStatsAvgJitterSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average value of jitters that measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 52 }
|
|
|
|
nqaPathJitterStatsAvgJitterDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average value of jitters that measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 53 }
|
|
|
|
nqaPathJitterStatsJitterOut OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"jitter (RFC1889) at responder."
|
|
::= { nqaPathJitterStatsEntry 54 }
|
|
|
|
nqaPathJitterStatsJitterIn OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Jitter (RFC1889) at sender."
|
|
::= { nqaPathJitterStatsEntry 55 }
|
|
|
|
nqaPathJitterStatsOwdOverThresholdsSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate OWD (One Way Delay)
|
|
threshold from source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 56 }
|
|
|
|
nqaPathJitterStatsPktLossUnknown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of lost packets for which we can't determine the direction
|
|
in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 57 }
|
|
|
|
nqaPathJitterStatsNumOfOwd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OWDs that were successfully measured in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 58 }
|
|
|
|
nqaPathJitterStatsOwdSumSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of OWDs that were successfully measured from packets sent from
|
|
source to destination in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 59 }
|
|
|
|
nqaPathJitterStatsOwdSumDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of OWDs that were successfully measured from packets sent from
|
|
destination to source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 60 }
|
|
|
|
nqaPathJitterStatsOwdOverThresholdsDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate OWD (One Way Delay) threshold from destination to
|
|
source in a hop of path jitter test."
|
|
::= { nqaPathJitterStatsEntry 61 }
|
|
|
|
nqaPppoeStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaPppoeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the rolling accumulated history of the PPPoE operation."
|
|
::= { nqaStats 9 }
|
|
|
|
nqaPppoeStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaPppoeStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the rolling accumulated history of the PPPoE operation.
|
|
This entry is created only if the nqaAdminCtrlType is pppoe."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPppoeStatsIndex, nqaPppoeRedialIndex }
|
|
::= { nqaPppoeStatsTable 1 }
|
|
|
|
NqaPppoeStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaPppoeStatsIndex
|
|
Integer32,
|
|
nqaPppoeRedialIndex
|
|
Integer32,
|
|
nqaPppoeStatsCompletions
|
|
INTEGER,
|
|
nqaPppoeStatsCurrentPhase
|
|
INTEGER,
|
|
nqaPppoeStatsErrorMessage
|
|
INTEGER,
|
|
nqaPppoeDiscoveryTimeout
|
|
Gauge32,
|
|
nqaPppoeLcpTimeout
|
|
Gauge32,
|
|
nqaPppoeAuthorizationTimeout
|
|
Gauge32,
|
|
nqaPppoeNcpTimeout
|
|
Gauge32,
|
|
nqaPppoeConnectionTime
|
|
Gauge32,
|
|
nqaPppoeClientSessionId
|
|
Gauge32,
|
|
nqaPppoeClientIpAddress
|
|
InetAddress,
|
|
nqaPppoeGatewayIpAddress
|
|
InetAddress
|
|
}
|
|
|
|
nqaPppoeStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of PPPoE statistics table, and the executing times of dispatching dependency tests."
|
|
::= { nqaPppoeStatsEntry 1 }
|
|
|
|
nqaPppoeRedialIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of PPPoE statistics table, and the redialing times of dispatching dependency tests."
|
|
::= { nqaPppoeStatsEntry 2 }
|
|
|
|
nqaPppoeStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dialupSuccess(1),
|
|
dialupFail(2),
|
|
stop(3),
|
|
exceptionStop(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 3 }
|
|
|
|
nqaPppoeStatsCurrentPhase OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
discovery(1),
|
|
lcp(2),
|
|
authorization(3),
|
|
ncp(4),
|
|
online(5),
|
|
stop(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current phase of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 4 }
|
|
|
|
nqaPppoeStatsErrorMessage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1),
|
|
timeout(2),
|
|
paramNegotiateFail(3),
|
|
userAuthenticationFail(4),
|
|
peerDownRequest(5),
|
|
noError(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error message result of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 5 }
|
|
|
|
nqaPppoeDiscoveryTimeout OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for discovery of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 6 }
|
|
|
|
nqaPppoeLcpTimeout OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for lcp negotiate of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 7 }
|
|
|
|
nqaPppoeAuthorizationTimeout OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for authentication of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 8 }
|
|
|
|
nqaPppoeNcpTimeout OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for ncp negotiate of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 9 }
|
|
|
|
nqaPppoeConnectionTime OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time for connection of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 10 }
|
|
|
|
nqaPppoeClientSessionId OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The client sessionID of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 11 }
|
|
|
|
nqaPppoeClientIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The client ip address of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 12 }
|
|
|
|
nqaPppoeGatewayIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The gateway ip address of PPPoE operation."
|
|
::= { nqaPppoeStatsEntry 13 }
|
|
|
|
nqaRtptestStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaRtptestStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the latest rtptest operation."
|
|
::= { nqaStats 10 }
|
|
nqaRtptestStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaRtptestStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaRtptestStatsIndex }
|
|
::= { nqaRtptestStatsTable 1 }
|
|
NqaRtptestStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaRtptestStatsIndex
|
|
Integer32,
|
|
nqaRtptestStatsCompletions
|
|
INTEGER,
|
|
nqaRtptestStatsIpTargetAddressType
|
|
InetAddressType,
|
|
nqaRtptestStatsIpTargetAddress
|
|
InetAddress,
|
|
nqaRtptestStatsIpTargetPort
|
|
InetPortNumber,
|
|
nqaRtptestStatsSourceAddressType
|
|
InetAddressType,
|
|
nqaRtptestStatsIpSourceAddress
|
|
InetAddress,
|
|
nqaRtptestStatsIpSourcePort
|
|
InetPortNumber,
|
|
nqaRtptestStatsMinRtt
|
|
Unsigned32,
|
|
nqaRtptestStatsMaxRtt
|
|
Unsigned32,
|
|
nqaRtptestStatsAverageRtt
|
|
Unsigned32,
|
|
nqaRtptestStatsProbeResponses
|
|
Counter32,
|
|
nqaRtptestStatsSentProbes
|
|
Counter32,
|
|
nqaRtptestStatsMaxJitter
|
|
Unsigned32,
|
|
nqaRtptestStatsMinJitter
|
|
Unsigned32,
|
|
nqaRtptestStatsAvgJitter
|
|
Unsigned32,
|
|
nqaRtptestStatsLostPacketRatio
|
|
Unsigned32,
|
|
nqaRtptestStatsSumRtt
|
|
Unsigned32,
|
|
nqaRtptestStatsMinDelaySD
|
|
Unsigned32,
|
|
nqaRtptestStatsMaxDelaySD
|
|
Unsigned32,
|
|
nqaRtptestStatsAvgDelaySD
|
|
Unsigned32,
|
|
nqaRtptestStatsMinJitterSD
|
|
Unsigned32,
|
|
nqaRtptestStatsMaxJitterSD
|
|
Unsigned32,
|
|
nqaRtptestStatsAvgJitterSD
|
|
Unsigned32,
|
|
nqaRtptestStatsLossRateSD
|
|
Unsigned32,
|
|
nqaRtptestStatsIPDVSD
|
|
Unsigned32
|
|
}
|
|
nqaRtptestStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result table index and times of dispatching dependency tests.
|
|
Each test can only reserve 1 record. The result table only contains
|
|
rtptest information. "
|
|
::= { nqaRtptestStatsEntry 1 }
|
|
|
|
nqaRtptestStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
running(1),
|
|
finished(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaRtptestStatsEntry 2 }
|
|
|
|
nqaRtptestStatsIpTargetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type, and the value range can be unknown(0),
|
|
and ipv4(1)."
|
|
::= { nqaRtptestStatsEntry 3 }
|
|
|
|
nqaRtptestStatsIpTargetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of rtptest."
|
|
::= { nqaRtptestStatsEntry 4 }
|
|
|
|
nqaRtptestStatsIpTargetPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The target host port of rtptest."
|
|
::= { nqaRtptestStatsEntry 5 }
|
|
|
|
nqaRtptestStatsSourceAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address type, and the value range can be unknown(0),
|
|
and ipv4(1)."
|
|
::= { nqaRtptestStatsEntry 6 }
|
|
|
|
nqaRtptestStatsIpSourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of rtptest."
|
|
::= { nqaRtptestStatsEntry 7 }
|
|
|
|
nqaRtptestStatsIpSourcePort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port of rtptest."
|
|
::= { nqaRtptestStatsEntry 8 }
|
|
|
|
nqaRtptestStatsMinRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min of RTT that are successfully measured."
|
|
::= { nqaRtptestStatsEntry 9 }
|
|
|
|
nqaRtptestStatsMaxRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max of RTT that are successfully measured."
|
|
::= { nqaRtptestStatsEntry 10 }
|
|
|
|
nqaRtptestStatsAverageRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that are successfully measured."
|
|
::= { nqaRtptestStatsEntry 11 }
|
|
|
|
nqaRtptestStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of responses from echo-server for the packets sent
|
|
by the test."
|
|
::= { nqaRtptestStatsEntry 12 }
|
|
|
|
nqaRtptestStatsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the packets sent by the test."
|
|
::= { nqaRtptestStatsEntry 13 }
|
|
|
|
nqaRtptestStatsMaxJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max of jitter value that are successfully measured."
|
|
::= { nqaRtptestStatsEntry 14 }
|
|
|
|
nqaRtptestStatsMinJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min of jitter value that are successfully measured."
|
|
::= { nqaRtptestStatsEntry 15 }
|
|
|
|
nqaRtptestStatsAvgJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter value that are successfully measured."
|
|
::= { nqaRtptestStatsEntry 16 }
|
|
|
|
nqaRtptestStatsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaRtptestStatsEntry 17 }
|
|
|
|
nqaRtptestStatsSumRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of RTTs that are successfully measured."
|
|
::= { nqaRtptestStatsEntry 18 }
|
|
|
|
nqaRtptestStatsMinDelaySD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of One Way Delay from source to destination."
|
|
::= { nqaRtptestStatsEntry 19 }
|
|
|
|
nqaRtptestStatsMaxDelaySD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of One Way Delay from source to destination."
|
|
::= { nqaRtptestStatsEntry 20 }
|
|
|
|
nqaRtptestStatsAvgDelaySD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of One Way Delay from source to destination."
|
|
::= { nqaRtptestStatsEntry 21 }
|
|
nqaRtptestStatsMinJitterSD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of jitter value from source to destination."
|
|
::= { nqaRtptestStatsEntry 22 }
|
|
|
|
nqaRtptestStatsMaxJitterSD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of jitter value from source to destination."
|
|
::= { nqaRtptestStatsEntry 23 }
|
|
|
|
nqaRtptestStatsAvgJitterSD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter value from source to destination."
|
|
::= { nqaRtptestStatsEntry 24 }
|
|
|
|
nqaRtptestStatsLossRateSD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets from source to destination."
|
|
::= { nqaRtptestStatsEntry 25 }
|
|
|
|
nqaRtptestStatsIPDVSD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPDV(Inter Packet Delay Variation) value from source to destination."
|
|
::= { nqaRtptestStatsEntry 26 }
|
|
|
|
nqaRtplistenStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaRtplistenStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the test Results Extend Table for providing
|
|
the capability of performing test operations at
|
|
a middle host. The results of these operations are
|
|
stored in the nqaRtplistenStatsTable . The operation of this
|
|
table is same as that of nqaResultsTable."
|
|
::= { nqaStats 11 }
|
|
|
|
nqaRtplistenStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaRtplistenStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaRtplistenStatsIndex }
|
|
::= { nqaRtplistenStatsTable 1 }
|
|
|
|
NqaRtplistenStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaRtplistenStatsIndex
|
|
Integer32,
|
|
nqaRtplistenStatsCompletions
|
|
INTEGER,
|
|
nqaRtplistenStatsIpTargetAddressType
|
|
InetAddressType,
|
|
nqaRtplistenStatsIpTargetAddress
|
|
InetAddress,
|
|
nqaRtplistenStatsIpTargetPort
|
|
InetPortNumber,
|
|
nqaRtplistenStatsSourceAddressType
|
|
InetAddressType,
|
|
nqaRtplistenStatsIpSourceAddress
|
|
InetAddress,
|
|
nqaRtplistenStatsIpSourcePort
|
|
InetPortNumber,
|
|
nqaRtplistenStatsDSField
|
|
Unsigned32,
|
|
nqaRtplistenStatsMaxJitter
|
|
Unsigned32,
|
|
nqaRtplistenStatsMinJitter
|
|
Unsigned32,
|
|
nqaRtplistenStatsAvgJitter
|
|
Unsigned32,
|
|
nqaRtplistenStatsLostPacketRatio
|
|
Unsigned32,
|
|
nqaRtplistenStatsMaxLostPacketNumber
|
|
Unsigned32
|
|
}
|
|
|
|
nqaRtplistenStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result table index and times of dispatching dependency tests.
|
|
Each test can only reserve 1 records. "
|
|
::= { nqaRtplistenStatsEntry 1 }
|
|
|
|
nqaRtplistenStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
running(1),
|
|
finished(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaRtplistenStatsEntry 2 }
|
|
|
|
nqaRtplistenStatsIpTargetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type, and the value range can be unknown(0),
|
|
and ipv4(1)"
|
|
::= { nqaRtplistenStatsEntry 3 }
|
|
|
|
nqaRtplistenStatsIpTargetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of rtpsnoop."
|
|
::= { nqaRtplistenStatsEntry 4 }
|
|
|
|
nqaRtplistenStatsIpTargetPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The target host port of rtpsnoop."
|
|
::= { nqaRtplistenStatsEntry 5 }
|
|
|
|
nqaRtplistenStatsSourceAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address type, and the value range can be unknown(0),
|
|
and ipv4(1)."
|
|
::= { nqaRtplistenStatsEntry 6 }
|
|
|
|
nqaRtplistenStatsIpSourceAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of rtpsnoop."
|
|
::= { nqaRtplistenStatsEntry 7 }
|
|
|
|
nqaRtplistenStatsIpSourcePort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port of rtpsnoop."
|
|
::= { nqaRtplistenStatsEntry 8 }
|
|
|
|
nqaRtplistenStatsDSField OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Differentiated Services (DS) field in the IP packet. The DS
|
|
field is defined as the Type Of Service (TOS) octet in IPv4 header or as
|
|
the Traffic Class octet in IPv6 header."
|
|
::= { nqaRtplistenStatsEntry 9 }
|
|
|
|
nqaRtplistenStatsMaxJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max of jitter value that are successfully measured."
|
|
::= { nqaRtplistenStatsEntry 10 }
|
|
|
|
nqaRtplistenStatsMinJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min of jitter value that are successfully measured."
|
|
::= { nqaRtplistenStatsEntry 11 }
|
|
|
|
nqaRtplistenStatsAvgJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter value that are successfully measured."
|
|
::= { nqaRtplistenStatsEntry 12 }
|
|
|
|
nqaRtplistenStatsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaRtplistenStatsEntry 13 }
|
|
nqaRtplistenStatsMaxLostPacketNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max of lost packet during the test running."
|
|
::= { nqaRtplistenStatsEntry 14 }
|
|
|
|
nqaGeneralflowStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaGeneralflowStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the test Results Extend Table for testing throughput of network.
|
|
The results of these operations are stored in the nqaGeneralflowStatsTable."
|
|
::= { nqaStats 12 }
|
|
|
|
nqaGeneralflowStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaGeneralflowStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaGeneralflowStatsIndex, nqaGenralflowStatsFrameSizeId }
|
|
::= { nqaGeneralflowStatsTable 1 }
|
|
|
|
NqaGeneralflowStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaGeneralflowStatsIndex
|
|
Integer32,
|
|
nqaGenralflowStatsFrameSizeId
|
|
Integer32,
|
|
nqaGeneralflowStatsCompletions
|
|
INTEGER,
|
|
nqaGeneralflowStatsResultDetail
|
|
Unsigned32,
|
|
nqaGeneralflowStatsTxRate
|
|
Unsigned32,
|
|
nqaGeneralflowStatsRxRate
|
|
Unsigned32,
|
|
nqaGeneralflowStatsMinRtt
|
|
Unsigned32,
|
|
nqaGeneralflowStatsMaxRtt
|
|
Unsigned32,
|
|
nqaGeneralflowStatsAverageRtt
|
|
Unsigned32,
|
|
nqaGeneralflowStatsMaxJitter
|
|
Unsigned32,
|
|
nqaGeneralflowStatsMinJitter
|
|
Unsigned32,
|
|
nqaGeneralflowStatsAvgJitter
|
|
Unsigned32,
|
|
nqaGeneralflowStatsTxCountLow
|
|
Unsigned32,
|
|
nqaGeneralflowStatsTxCountHigh
|
|
Unsigned32,
|
|
nqaGeneralflowStatsRxCountLow
|
|
Unsigned32,
|
|
nqaGeneralflowStatsRxCountHigh
|
|
Unsigned32,
|
|
nqaGeneralflowStatsFrameLossRate
|
|
Unsigned32,
|
|
nqaGeneralflowStatsPrecision
|
|
Unsigned32,
|
|
nqaGeneralflowStatsThroughput
|
|
Unsigned32,
|
|
nqaGeneralflowStatsDataSize
|
|
Unsigned32,
|
|
nqaGeneralflowStatsTestStatus
|
|
INTEGER,
|
|
nqaGeneralflowStatsFrameLossRatePrecision
|
|
Unsigned32,
|
|
nqaGeneralflowStatsFrameLossRatePrecisionValue
|
|
Unsigned32,
|
|
nqaGeneralflowStatsStartTime
|
|
Unsigned32,
|
|
nqaGeneralflowStatsEndTime
|
|
Unsigned32,
|
|
nqaGeneralflowStatsTestTotalTime
|
|
Unsigned32,
|
|
nqaGeneralflowStatsTestRemainingTime
|
|
Unsigned32,
|
|
nqaGeneralflowStatsTestTime
|
|
Unsigned32,
|
|
nqaGeneralflowStatsEstimatedTestTime
|
|
Unsigned32,
|
|
nqaGeneralflowStatsRealTestTime
|
|
Unsigned32,
|
|
nqaGeneralflowStatsFrameRate
|
|
INTEGER,
|
|
nqaGeneralflowStatsCurrentRateCount
|
|
Unsigned32
|
|
}
|
|
|
|
nqaGeneralflowStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the index of the result table of the generalflow test."
|
|
::= { nqaGeneralflowStatsEntry 1 }
|
|
|
|
nqaGenralflowStatsFrameSizeId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the index of the packet size in the Generalflow statistics table. An index corresponds to a packet size."
|
|
::= { nqaGeneralflowStatsEntry 2 }
|
|
|
|
nqaGeneralflowStatsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2),
|
|
finished(3),
|
|
running(4),
|
|
ready(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the Generalflow test instance has completed the current packet size test.
|
|
noResult (0) indicates that the current packet size test is running.
|
|
success(1) indicates that the current packet size test has completed.
|
|
failure(2) indicates that the current packet size test failed.
|
|
finished(3) indicates that the current packet size test finished.
|
|
running(4) indicates that the current packet size test is running.
|
|
ready(5) indicates that the current packet size test has not started."
|
|
::= { nqaGeneralflowStatsEntry 3 }
|
|
|
|
nqaGeneralflowStatsResultDetail OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates detailed information about the current packet size test in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 4 }
|
|
|
|
nqaGeneralflowStatsTxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the rate at which packets with the current size are sent in the Generalflow test instance, in Kbps."
|
|
::= { nqaGeneralflowStatsEntry 5 }
|
|
|
|
nqaGeneralflowStatsRxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the rate at which packets with the current size are received in the Generalflow test instance, in Kbps."
|
|
::= { nqaGeneralflowStatsEntry 6 }
|
|
|
|
nqaGeneralflowStatsMinRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the minimum RTT of the current packet size test in the Generalflow test instance, in us."
|
|
::= { nqaGeneralflowStatsEntry 7 }
|
|
|
|
nqaGeneralflowStatsMaxRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum RTT of the current packet size test in the Generalflow test instance, in us."
|
|
::= { nqaGeneralflowStatsEntry 8 }
|
|
|
|
nqaGeneralflowStatsAverageRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the average RTT of the current packet size test in the Generalflow test instance, in us."
|
|
::= { nqaGeneralflowStatsEntry 9 }
|
|
|
|
nqaGeneralflowStatsMaxJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum two-way jitter of the current packet size test in the Generalflow test instance, in us."
|
|
::= { nqaGeneralflowStatsEntry 10 }
|
|
|
|
nqaGeneralflowStatsMinJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the minimum two-way jitter of the current packet size test in the Generalflow test instance, in us."
|
|
::= { nqaGeneralflowStatsEntry 11 }
|
|
|
|
nqaGeneralflowStatsAvgJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the average two-way jitter of the current packet size test in the Generalflow test instance, in us."
|
|
::= { nqaGeneralflowStatsEntry 12 }
|
|
|
|
nqaGeneralflowStatsTxCountLow OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the lower 32 bit of the number of packets with the current packet size sent in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 13 }
|
|
|
|
nqaGeneralflowStatsTxCountHigh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the higher 32 bit of the number of packets with the current packet size sent in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 14 }
|
|
|
|
nqaGeneralflowStatsRxCountLow OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the lower 32 bit of the number of packets with the current packet size received in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 15 }
|
|
|
|
nqaGeneralflowStatsRxCountHigh OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the higher 32 bit of the number of packets with the current packet size received in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 16 }
|
|
|
|
nqaGeneralflowStatsFrameLossRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the packet loss ratio of the current packet size test in the Generalflow test instance,when precision is 10e-4."
|
|
::= { nqaGeneralflowStatsEntry 17 }
|
|
|
|
nqaGeneralflowStatsPrecision OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the precision of the current packet size test in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 18 }
|
|
|
|
nqaGeneralflowStatsThroughput OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the throughput of the current packet size test in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 19 }
|
|
|
|
nqaGeneralflowStatsDataSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the packet size of the current packet size test in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 20 }
|
|
|
|
nqaGeneralflowStatsTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
running(0),
|
|
finished(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the tests of all packet sizes in the Generalflow test instance have completed."
|
|
::= { nqaGeneralflowStatsEntry 21 }
|
|
|
|
nqaGeneralflowStatsFrameLossRatePrecision OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the packet loss ratio precision of the current packet size test in the Generalflow test instance.
|
|
0 indicates in 10e-4.
|
|
1 indicates in 10e-9."
|
|
::= { nqaGeneralflowStatsEntry 22 }
|
|
|
|
nqaGeneralflowStatsFrameLossRatePrecisionValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the packet loss ratio value of the current packet size test in the Generalflow test instance."
|
|
::= { nqaGeneralflowStatsEntry 23 }
|
|
|
|
nqaGeneralflowStatsStartTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time when the Generalflow test started."
|
|
::= { nqaGeneralflowStatsEntry 24 }
|
|
|
|
nqaGeneralflowStatsEndTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time when the Generalflow test ended."
|
|
::= { nqaGeneralflowStatsEntry 25 }
|
|
|
|
nqaGeneralflowStatsTestTotalTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the total time (in seconds) used by the Generalflow test."
|
|
::= { nqaGeneralflowStatsEntry 26 }
|
|
|
|
nqaGeneralflowStatsTestRemainingTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the remaining time (in seconds) used by the Generalflow test."
|
|
::= { nqaGeneralflowStatsEntry 27 }
|
|
|
|
nqaGeneralflowStatsTestTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time (in seconds) used by the Generalflow test."
|
|
::= { nqaGeneralflowStatsEntry 28 }
|
|
|
|
nqaGeneralflowStatsEstimatedTestTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the estimated time (in seconds) used by the Generalflow test."
|
|
::= { nqaGeneralflowStatsEntry 29 }
|
|
|
|
nqaGeneralflowStatsRealTestTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the real time (in seconds) used by the Generalflow test."
|
|
::= { nqaGeneralflowStatsEntry 30 }
|
|
|
|
nqaGeneralflowStatsFrameRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
l1(1),
|
|
l2(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an Ethernet frame rate in the Generalflow test.
|
|
1: utilized line rate (L1 rate).
|
|
2: information rate (L2 rate)."
|
|
::= { nqaGeneralflowStatsEntry 31 }
|
|
|
|
nqaGeneralflowStatsCurrentRateCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the count of current rate for throughput used by the Generalflow test."
|
|
::= { nqaGeneralflowStatsEntry 32 }
|
|
|
|
nqaGeneralflowCurrentStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaGeneralflowCurrentStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the current test results for generalflow test type.
|
|
The results of these operations are stored in the nqaGeneralflowCurrentStatsTable."
|
|
::= { nqaStats 13 }
|
|
|
|
nqaGeneralflowCurrentStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaGeneralflowCurrentStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaGeneralflowStatsIndex, nqaGenralflowStatsFrameSizeId, nqaGeneralflowCurrentStatsRateIndex }
|
|
::= { nqaGeneralflowCurrentStatsTable 1 }
|
|
|
|
NqaGeneralflowCurrentStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaGeneralflowCurrentStatsRateIndex
|
|
Unsigned32,
|
|
nqaGeneralflowCurrentStatsThroughput
|
|
Unsigned32,
|
|
nqaGeneralflowCurrentStatsFrameLossRate
|
|
Unsigned32
|
|
}
|
|
|
|
nqaGeneralflowCurrentStatsRateIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the index of the current result table of the generalflow test."
|
|
::= { nqaGeneralflowCurrentStatsEntry 1 }
|
|
|
|
nqaGeneralflowCurrentStatsThroughput OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current throughput of each packet size test in the Generalflow test instance."
|
|
::= { nqaGeneralflowCurrentStatsEntry 2 }
|
|
|
|
nqaGeneralflowCurrentStatsFrameLossRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current packet loss ratio of each packet size test in the Generalflow test instance, when precision is 10e-4."
|
|
::= { nqaGeneralflowCurrentStatsEntry 3 }
|
|
|
|
nqaEthernetServiceStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaEthernetServiceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The statistics collection database.
|
|
Defines the Y.1564 Operations Statistics Table for storing the statistics of a Y.1564 test."
|
|
::= { nqaStats 14 }
|
|
|
|
nqaEthernetServiceStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaEthernetServiceStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of latest Y.1564 operation. The operation of this table is same as that of nqaResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaEthernetServiceStatsIndex, nqaEthernetServiceStatsTestFlowId, nqaEthernetServiceStatsTestStep }
|
|
::= { nqaEthernetServiceStatsTable 1 }
|
|
|
|
NqaEthernetServiceStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaEthernetServiceStatsIndex
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestFlowId
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestStep
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestProcess
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestStatus
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestFlowNum
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestMode
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestBeginTime
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestEndTime
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestTotalTime
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestRealTime
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsResultDetail
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsTestPhase
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowBeginTime
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowEndTime
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsDisorderPacketsNum
|
|
OCTET STRING,
|
|
nqaEthernetServiceStatsFlowResult
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMinIR
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMaxIR
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMeanIR
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMinFTD
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMaxFTD
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMeanFTD
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMinFDV
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMaxFDV
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowMeanFDV
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowFlCount
|
|
OCTET STRING,
|
|
nqaEthernetServiceStatsFlowFLRPrecision
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowFLR
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowUnavailCount
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowAvailPrecision
|
|
Unsigned32,
|
|
nqaEthernetServiceStatsFlowAVAIL
|
|
Unsigned32
|
|
}
|
|
|
|
nqaEthernetServiceStatsIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the result table of Y.1564 test."
|
|
::= { nqaEthernetServiceStatsEntry 1 }
|
|
|
|
nqaEthernetServiceStatsTestFlowId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The test flow ID of Y.1564 test."
|
|
::= { nqaEthernetServiceStatsEntry 2 }
|
|
|
|
nqaEthernetServiceStatsTestStep OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the result table of EthernetService test step.
|
|
0: cir simple test.
|
|
1: cir step test(25% CIR).
|
|
2: cir step test(50% CIR).
|
|
3: cir step test(75% CIR).
|
|
4: cir step test(100% CIR).
|
|
5: cir/eir test with color blind mode.
|
|
6: cir/eir test with color aware mode.
|
|
7: traffic policing test with color blind mode.
|
|
8: traffic policing test with color aware mode.
|
|
9: performance test.
|
|
10: green flow in cir/eir test step.
|
|
11: yellow flow in cir/eir test step.
|
|
12: total flow in cir/eir test step.
|
|
13: green flow in Traffic policing test step.
|
|
14: yellow flow in Traffic policing test step.
|
|
15: total flow in Traffic policing test step.
|
|
16: initial step ."
|
|
::= { nqaEthernetServiceStatsEntry 3 }
|
|
|
|
nqaEthernetServiceStatsTestProcess OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of Y.1564 test.
|
|
0 indicates running
|
|
1 indicates finished
|
|
2 indicates unknown"
|
|
::= { nqaEthernetServiceStatsEntry 4 }
|
|
|
|
nqaEthernetServiceStatsTestStatus OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of Y.1564 test.
|
|
0 indicates pass,
|
|
1 indicates failed,
|
|
2 indicates abort,
|
|
3 indicates abnormal,
|
|
4 indicates initial"
|
|
::= { nqaEthernetServiceStatsEntry 5 }
|
|
|
|
nqaEthernetServiceStatsTestFlowNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of test flow"
|
|
::= { nqaEthernetServiceStatsEntry 6 }
|
|
|
|
nqaEthernetServiceStatsTestMode OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The test mode of Y.1564 test.
|
|
0 indicates roundtrip mode."
|
|
::= { nqaEthernetServiceStatsEntry 7 }
|
|
|
|
nqaEthernetServiceStatsTestBeginTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begining time of Y.1564 test."
|
|
::= { nqaEthernetServiceStatsEntry 8 }
|
|
|
|
nqaEthernetServiceStatsTestEndTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ending time of Y.1564 test"
|
|
::= { nqaEthernetServiceStatsEntry 9 }
|
|
|
|
nqaEthernetServiceStatsTestTotalTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total time of Y.1564 test."
|
|
::= { nqaEthernetServiceStatsEntry 10 }
|
|
|
|
nqaEthernetServiceStatsTestRealTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The real test time of Y.1564 test."
|
|
::= { nqaEthernetServiceStatsEntry 11 }
|
|
|
|
nqaEthernetServiceStatsResultDetail OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The detailed result of Y.1564 test."
|
|
::= { nqaEthernetServiceStatsEntry 12 }
|
|
|
|
nqaEthernetServiceStatsTestPhase OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Phases of Y.1564 test.
|
|
0 indicates configuration test.
|
|
1 indicates performance test."
|
|
::= { nqaEthernetServiceStatsEntry 13 }
|
|
|
|
nqaEthernetServiceStatsFlowBeginTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The begining time of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 14 }
|
|
|
|
nqaEthernetServiceStatsFlowEndTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ending time of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 15 }
|
|
|
|
nqaEthernetServiceStatsDisorderPacketsNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of disorder packets."
|
|
::= { nqaEthernetServiceStatsEntry 16 }
|
|
nqaEthernetServiceStatsFlowResult OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the test flow.
|
|
0 indicates pass.
|
|
1 indicates failed.
|
|
2 indicates abort.
|
|
3 indicates abnormal.
|
|
4 indicates initial."
|
|
::= { nqaEthernetServiceStatsEntry 17 }
|
|
|
|
nqaEthernetServiceStatsFlowMinIR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min IR of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 18 }
|
|
|
|
nqaEthernetServiceStatsFlowMaxIR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max IR of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 19 }
|
|
|
|
nqaEthernetServiceStatsFlowMeanIR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean IR of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 20 }
|
|
|
|
nqaEthernetServiceStatsFlowMinFTD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min FTD of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 21 }
|
|
|
|
nqaEthernetServiceStatsFlowMaxFTD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max FTD of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 22 }
|
|
|
|
nqaEthernetServiceStatsFlowMeanFTD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean FTD of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 23 }
|
|
|
|
nqaEthernetServiceStatsFlowMinFDV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min FDV of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 24 }
|
|
|
|
nqaEthernetServiceStatsFlowMaxFDV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max FDV of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 25 }
|
|
|
|
nqaEthernetServiceStatsFlowMeanFDV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mean FDV of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 26 }
|
|
|
|
nqaEthernetServiceStatsFlowFlCount OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame loss count of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 27 }
|
|
|
|
nqaEthernetServiceStatsFlowFLRPrecision OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FLR precision of the test flow.
|
|
0 indicates in 10e-5."
|
|
::= { nqaEthernetServiceStatsEntry 28 }
|
|
|
|
nqaEthernetServiceStatsFlowFLR OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FLR of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 29 }
|
|
|
|
nqaEthernetServiceStatsFlowUnavailCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unavail count of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 30 }
|
|
|
|
nqaEthernetServiceStatsFlowAvailPrecision OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The avail precision of the test flow.
|
|
0 indicates in 10e-5."
|
|
::= { nqaEthernetServiceStatsEntry 31 }
|
|
|
|
nqaEthernetServiceStatsFlowAVAIL OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The avail value of the test flow."
|
|
::= { nqaEthernetServiceStatsEntry 32 }
|
|
|
|
nqaJitterLatestStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaJitterLatestStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"nqaJitterLatestStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection.
|
|
Creation restrictions: No entry can be created in this table.
|
|
Modification restrictions: The entries in this table cannot be modified.
|
|
Deletion restrictions: The entries in this table cannot be deleted.
|
|
Access restrictions: The entries in this table can be accessed only when the test instance type is jitter."
|
|
::= { nqaStats 15 }
|
|
|
|
nqaJitterLatestStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaJitterLatestStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the status of latest Jitter operation."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName}
|
|
::= { nqaJitterLatestStatsTable 1 }
|
|
|
|
NqaJitterLatestStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaJitterLatestStatsMaxDelaySD
|
|
Unsigned32,
|
|
nqaJitterLatestStatsMaxDelayDS
|
|
Unsigned32,
|
|
nqaJitterLatestStatsAvgDelaySD
|
|
Unsigned32,
|
|
nqaJitterLatestStatsAvgDelayDS
|
|
Unsigned32,
|
|
nqaJitterLatestStatsRTTMin
|
|
Unsigned32,
|
|
nqaJitterLatestStatsRTTMax
|
|
Unsigned32,
|
|
nqaJitterLatestStatsRTTAvg
|
|
Unsigned32,
|
|
nqaJitterLatestStatsPacketLossRatio
|
|
Unsigned32,
|
|
nqaJitterLatestStatsAvgJitter
|
|
Unsigned32,
|
|
nqaJitterLatestStatsAvgJitterSD
|
|
Unsigned32,
|
|
nqaJitterLatestStatsAvgJitterDS
|
|
Unsigned32
|
|
}
|
|
|
|
nqaJitterLatestStatsMaxDelaySD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay) from source to destination."
|
|
::= { nqaJitterLatestStatsEntry 1 }
|
|
|
|
nqaJitterLatestStatsMaxDelayDS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay) from destination to source."
|
|
::= { nqaJitterLatestStatsEntry 2 }
|
|
|
|
nqaJitterLatestStatsAvgDelaySD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of one way time from source to destination."
|
|
::= { nqaJitterLatestStatsEntry 3 }
|
|
|
|
nqaJitterLatestStatsAvgDelayDS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of one way time from destination to source."
|
|
::= { nqaJitterLatestStatsEntry 4 }
|
|
|
|
nqaJitterLatestStatsRTTMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterLatestStatsEntry 5 }
|
|
|
|
nqaJitterLatestStatsRTTMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterLatestStatsEntry 6 }
|
|
|
|
nqaJitterLatestStatsRTTAvg OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterLatestStatsEntry 7 }
|
|
|
|
nqaJitterLatestStatsPacketLossRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaJitterLatestStatsEntry 8 }
|
|
|
|
nqaJitterLatestStatsAvgJitter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values that were successfully measured by tests."
|
|
::= { nqaJitterLatestStatsEntry 9 }
|
|
|
|
nqaJitterLatestStatsAvgJitterSD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values from source to destination that were successfully measured by tests."
|
|
::= { nqaJitterLatestStatsEntry 10 }
|
|
|
|
nqaJitterLatestStatsAvgJitterDS OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values from destination to source that were successfully measured by tests."
|
|
::= { nqaJitterLatestStatsEntry 11 }
|
|
|
|
nqaMultiPathResultsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaMultiPathResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: This table describes result information of a test instance.
|
|
Creation restrictions: No entry can be created in this table.
|
|
Modification restrictions: The entries in this table cannot be modified.
|
|
Deletion restrictions: The entries in this table cannot be deleted.
|
|
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
|
|
A GET operation is performed.
|
|
The test instance type must be LSPPING, or LSPTRACE.
|
|
The nqaMultiPathResultsIndex , nqaMultiPathResultsPathIndex and nqaMultiPathResultsHopIndex values must be 0."
|
|
::= { nqaStats 16 }
|
|
|
|
nqaMultiPathResultsEntry OBJECT-TYPE
|
|
SYNTAX NqaMultiPathResultsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaMultiPathResultsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMultiPathResultsIndex, nqaMultiPathResultsPathIndex, nqaMultiPathResultsHopIndex }
|
|
::= { nqaMultiPathResultsTable 1 }
|
|
|
|
NqaMultiPathResultsEntry ::=
|
|
SEQUENCE {
|
|
nqaMultiPathResultsIndex
|
|
Integer32,
|
|
nqaMultiPathResultsPathIndex
|
|
Integer32,
|
|
nqaMultiPathResultsHopIndex
|
|
Integer32,
|
|
nqaMultiPathResultsCompletions
|
|
INTEGER,
|
|
nqaMultiPathResultsTestAttempts
|
|
Counter32,
|
|
nqaMultiPathResultsCurHopCount
|
|
Gauge32,
|
|
nqaMultiPathResultsCurProbeCount
|
|
Gauge32,
|
|
nqaMultiPathResultsRTDOverThresholds
|
|
Counter32,
|
|
nqaMultiPathResultsSumCompletionTime
|
|
Counter32,
|
|
nqaMultiPathResultsSumCompletionTime2Low
|
|
Counter32,
|
|
nqaMultiPathResultsSumCompletionTime2High
|
|
Counter32,
|
|
nqaMultiPathResultsCompletionTimeMin
|
|
Gauge32,
|
|
nqaMultiPathResultsCompletionTimeMax
|
|
Gauge32,
|
|
nqaMultiPathResultsDisconnects
|
|
Counter32,
|
|
nqaMultiPathResultsTimeouts
|
|
Counter32,
|
|
nqaMultiPathResultsBusies
|
|
Counter32,
|
|
nqaMultiPathResultsNoConnections
|
|
Counter32,
|
|
nqaMultiPathResultsSequenceErrors
|
|
Counter32,
|
|
nqaMultiPathResultsDrops
|
|
Counter32,
|
|
nqaMultiPathResultsAddressType
|
|
InetAddressType,
|
|
nqaMultiPathResultsAddress
|
|
InetAddress,
|
|
nqaMultiPathResultsProbeResponses
|
|
Counter32,
|
|
nqaMultiPathResultsSentProbes
|
|
Counter32,
|
|
nqaMultiPathResultsLastGoodProbe
|
|
DateAndTime,
|
|
nqaMultiPathResultsLastGoodPath
|
|
DateAndTime,
|
|
nqaMultiPathResultsTestFinished
|
|
INTEGER,
|
|
nqaMultiPathResultsRttAvg
|
|
Gauge32,
|
|
nqaMultiPathResultsLostPacketRatio
|
|
Gauge32,
|
|
nqaMultiPathResultsSrPolicyPreference
|
|
Gauge32,
|
|
nqaMultiPathResultsSrPolicyPathType
|
|
INTEGER,
|
|
nqaMultiPathResultsSrPolicyProtocol
|
|
INTEGER,
|
|
nqaMultiPathResultsSrPolicyNodeAddress
|
|
InetAddress,
|
|
nqaMultiPathResultsSrPolicyDiscriminator
|
|
Gauge32,
|
|
nqaMultiPathResultsSrPolicySegListId
|
|
Gauge32,
|
|
nqaMultiPathResultsSrPolicyXcIndex
|
|
Gauge32
|
|
}
|
|
|
|
nqaMultiPathResultsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result table index and times of dispatching dependency tests.
|
|
Each test can only reserve 5 records. The result table only contains
|
|
icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. "
|
|
::= { nqaMultiPathResultsEntry 1 }
|
|
|
|
nqaMultiPathResultsPathIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path index."
|
|
::= { nqaMultiPathResultsEntry 2 }
|
|
|
|
nqaMultiPathResultsHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1."
|
|
::= { nqaMultiPathResultsEntry 3 }
|
|
|
|
nqaMultiPathResultsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test."
|
|
::= { nqaMultiPathResultsEntry 4 }
|
|
|
|
nqaMultiPathResultsTestAttempts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "tests"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of executing tests, which includes the times of successful execution,
|
|
failed execution and interruption (interrupted by human or system).
|
|
The current number of test attempts. The value of this object MUST be started at 0."
|
|
::= { nqaMultiPathResultsEntry 5 }
|
|
|
|
nqaMultiPathResultsCurHopCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "hops"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is equal to the hop count index executed
|
|
by current Traceroute or LSP Traceroute tests.
|
|
Ping/LSP Ping does not use this entry. The default value is 0."
|
|
::= { nqaMultiPathResultsEntry 6 }
|
|
|
|
nqaMultiPathResultsCurProbeCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "probes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total count of probe packets of Traceroute
|
|
or LSP Traceroute test in a hop count index."
|
|
::= { nqaMultiPathResultsEntry 7 }
|
|
|
|
nqaMultiPathResultsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of successful statistics test RTD (Round Trip Delay)
|
|
over the threshold."
|
|
::= { nqaMultiPathResultsEntry 8 }
|
|
|
|
nqaMultiPathResultsSumCompletionTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of RTT (response time) of all packets of each hop for executing Traceroute,
|
|
LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping,
|
|
lsp ping and disman-ping tests and so on."
|
|
::= { nqaMultiPathResultsEntry 9 }
|
|
|
|
nqaMultiPathResultsSumCompletionTime2Low OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low order 32 bits of the accumulated squares
|
|
of completion times (in milliseconds) of NQA
|
|
operations which complete successfully.
|
|
|
|
Low/High order is defined where the binary number
|
|
will look as follows:
|
|
*************************************************
|
|
| High order 32 bits | Low order 32 bits |
|
|
*************************************************
|
|
For example the number 4294967296 would have all
|
|
Low order bits as '0' and the rightmost High
|
|
order bit will be 1 (zeros,1).
|
|
"
|
|
::= { nqaMultiPathResultsEntry 10 }
|
|
|
|
nqaMultiPathResultsSumCompletionTime2High OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high order 32 bits of the accumulated squares
|
|
of completion times (in milliseconds) of NQA
|
|
operations which complete successfully.
|
|
|
|
See the nqaResultsSumCompletionTime2Low object
|
|
for a definition of Low/High Order.
|
|
"
|
|
::= { nqaMultiPathResultsEntry 11 }
|
|
|
|
nqaMultiPathResultsCompletionTimeMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum RTT (for Traceroute and LSP Traceroute,
|
|
it is the minimum RTT among all the packet of next hop) of all packets for executing a test. "
|
|
::= { nqaMultiPathResultsEntry 12 }
|
|
|
|
nqaMultiPathResultsCompletionTimeMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum RTT (for Traceroute and LSP Traceroute,
|
|
it is the maximum RTT among all the packets of next hop) of all packets in executing a test."
|
|
::= { nqaMultiPathResultsEntry 13 }
|
|
|
|
nqaMultiPathResultsDisconnects OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of consecutive failures. For connectionless protocol type of test, this number should be zero."
|
|
::= { nqaMultiPathResultsEntry 14 }
|
|
|
|
nqaMultiPathResultsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation was not
|
|
completed before a timeout occurred, i.e.
|
|
nqaAdminCtrlTimeOut was exceeded."
|
|
::= { nqaMultiPathResultsEntry 15 }
|
|
|
|
nqaMultiPathResultsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times of failure to apply resource due to the busy system.
|
|
such as apply memory or create socket failure."
|
|
::= { nqaMultiPathResultsEntry 16 }
|
|
|
|
nqaMultiPathResultsNoConnections OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a NQA operation could not be
|
|
initiated because the connection to the target has not
|
|
been established. For all other nqaAdminCtrlType this
|
|
object will remain zero.
|
|
|
|
This cannot occur for connectionless protocols, but may
|
|
occur for connection oriented protocols, such as TCP.
|
|
|
|
Since a NQA operation was never initiated, the completion
|
|
time of these operations are not accumulated, nor do they
|
|
increment nqaResultsCompletions.
|
|
"
|
|
::= { nqaMultiPathResultsEntry 17 }
|
|
|
|
nqaMultiPathResultsSequenceErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of NQA operation completions received with
|
|
an unexpected sequence identifier. For all other values
|
|
of nqaAdminCtrlType this object will remain zero.
|
|
|
|
When this has occurred some of the possible reasons maybe:
|
|
- a duplicate packet was received
|
|
- a response was received after it had timed-out
|
|
- a corrupted packet was received and was not detected
|
|
"
|
|
::= { nqaMultiPathResultsEntry 18 }
|
|
|
|
nqaMultiPathResultsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The times probes of the test dropped due to sending or connecting failure."
|
|
::= { nqaMultiPathResultsEntry 19 }
|
|
|
|
nqaMultiPathResultsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type, and the value range can be unknown(0),
|
|
ipv4(1) and dns(16)."
|
|
::= { nqaMultiPathResultsEntry 20 }
|
|
|
|
nqaMultiPathResultsAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address (TraceRoute is the destination address of each hop,
|
|
and ping is the destination address of tests)."
|
|
::= { nqaMultiPathResultsEntry 21 }
|
|
|
|
nqaMultiPathResultsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "responses"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of responses received for the corresponding
|
|
test. The value of this object
|
|
MUST be reported as 0 when no probe responses have been
|
|
received."
|
|
::= { nqaMultiPathResultsEntry 22 }
|
|
|
|
nqaMultiPathResultsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "probes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object reflects the number of probes sent
|
|
for the corresponding test.
|
|
The value of this object MUST be reported as 0 when no probes
|
|
have been sent."
|
|
::= { nqaMultiPathResultsEntry 23 }
|
|
|
|
nqaMultiPathResultsLastGoodProbe OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Date and time when the last response was received for a probe."
|
|
::= { nqaMultiPathResultsEntry 24 }
|
|
|
|
nqaMultiPathResultsLastGoodPath OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the last complete path was determined."
|
|
::= { nqaMultiPathResultsEntry 25 }
|
|
|
|
nqaMultiPathResultsTestFinished OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFinish(0),
|
|
finish(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of test execution."
|
|
::= { nqaMultiPathResultsEntry 26 }
|
|
|
|
nqaMultiPathResultsRttAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaMultiPathResultsEntry 27}
|
|
|
|
nqaMultiPathResultsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaMultiPathResultsEntry 28 }
|
|
|
|
nqaMultiPathResultsSrPolicyPreference OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference of the segment list."
|
|
::= { nqaMultiPathResultsEntry 29}
|
|
|
|
nqaMultiPathResultsSrPolicyPathType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
main(1),
|
|
backup(0),
|
|
unknown(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path type of the segment list."
|
|
::= { nqaMultiPathResultsEntry 30}
|
|
|
|
nqaMultiPathResultsSrPolicyProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pecp(10),
|
|
bgp(20),
|
|
local(30),
|
|
unknown(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol of the segment list."
|
|
::= { nqaMultiPathResultsEntry 31}
|
|
|
|
nqaMultiPathResultsSrPolicyNodeAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of the segment list."
|
|
::= { nqaMultiPathResultsEntry 32}
|
|
|
|
nqaMultiPathResultsSrPolicyDiscriminator OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The discriminator of the segment list."
|
|
::= { nqaMultiPathResultsEntry 33}
|
|
|
|
nqaMultiPathResultsSrPolicySegListId OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id of the segment list."
|
|
::= { nqaMultiPathResultsEntry 34}
|
|
|
|
nqaMultiPathResultsSrPolicyXcIndex OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The xc index of the segment list."
|
|
::= { nqaMultiPathResultsEntry 35}
|
|
|
|
nqaLatestStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaLatestStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"nqaLatestStatsTable describes statistics about the latest network status detection using probe packets.
|
|
Creation restrictions: No entry can be created in this table.
|
|
Modification restrictions: The entries in this table cannot be modified.
|
|
Deletion restrictions: The entries in this table cannot be deleted.
|
|
Access restrictions: The entries in this table can be accessed only when the test instance type is icmp."
|
|
::= { nqaStats 17 }
|
|
|
|
nqaLatestStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaLatestStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation of this table is same as that of nqaLatestStatsTable."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName}
|
|
::= { nqaLatestStatsTable 1 }
|
|
|
|
NqaLatestStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaLatestResultsCompletions
|
|
INTEGER,
|
|
nqaLatestResultsDstAddress
|
|
InetAddress,
|
|
nqaLatestResultSrcAddress
|
|
InetAddress,
|
|
nqaLatestResultsLostPacketRatio
|
|
Gauge32
|
|
}
|
|
|
|
nqaLatestResultsCompletions OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noResult(0),
|
|
success(1),
|
|
failure(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The latest status of the test."
|
|
::= { nqaLatestStatsEntry 1 }
|
|
|
|
nqaLatestResultsDstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The latest destination address in the test."
|
|
::= { nqaLatestStatsEntry 2 }
|
|
|
|
nqaLatestResultSrcAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The latest source address in the test."
|
|
::= { nqaLatestStatsEntry 3 }
|
|
|
|
|
|
nqaLatestResultsLostPacketRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaLatestStatsEntry 4 }
|
|
|
|
nqaHistory OBJECT IDENTIFIER ::= { nqa 5 }
|
|
|
|
nqaHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote Operations test History Table for
|
|
storing the results of a test operation."
|
|
::= { nqaHistory 1 }
|
|
|
|
nqaHistoryEntry OBJECT-TYPE
|
|
SYNTAX NqaHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a test
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding nqaAdminParaHistoryRowMax."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHistoryIndex, nqaHistoryHopIndex, nqaHistoryProbeIndex }
|
|
::= { nqaHistoryTable 1 }
|
|
|
|
NqaHistoryEntry ::=
|
|
SEQUENCE {
|
|
nqaHistoryIndex
|
|
Integer32,
|
|
nqaHistoryHopIndex
|
|
Integer32,
|
|
nqaHistoryProbeIndex
|
|
Integer32,
|
|
nqaHistoryTimeStamp
|
|
DateAndTime,
|
|
nqaHistoryAddressType
|
|
InetAddressType,
|
|
nqaHistoryAddress
|
|
InetAddress,
|
|
nqaHistoryCompletionTime
|
|
Integer32,
|
|
nqaHistoryFinishState
|
|
INTEGER,
|
|
nqaHistoryLastRC
|
|
Integer32
|
|
}
|
|
|
|
nqaHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history table index and times for dispatching dependency tests."
|
|
::= { nqaHistoryEntry 1 }
|
|
|
|
nqaHistoryHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1."
|
|
::= { nqaHistoryEntry 2 }
|
|
|
|
nqaHistoryProbeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The probe index of tests."
|
|
::= { nqaHistoryEntry 3 }
|
|
|
|
nqaHistoryTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time stamp of a probe."
|
|
::= { nqaHistoryEntry 4 }
|
|
|
|
nqaHistoryAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of history records."
|
|
::= { nqaHistoryEntry 5 }
|
|
|
|
nqaHistoryAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of tests. For Traceroute, it is the destination address of each hop. "
|
|
::= { nqaHistoryEntry 6 }
|
|
|
|
nqaHistoryCompletionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time from when a probe was sent to when its response was received or
|
|
when it timed out. The value of this object is reported
|
|
as 0 when it is not possible to transmit a probe."
|
|
::= { nqaHistoryEntry 7 }
|
|
|
|
nqaHistoryFinishState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
success(1),
|
|
timeout(2),
|
|
drop(3),
|
|
busy(4),
|
|
overThreshold(5),
|
|
disconnected(6),
|
|
noConnected(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of a test operation made by a remote
|
|
host for a particular probe."
|
|
::= { nqaHistoryEntry 8 }
|
|
|
|
nqaHistoryLastRC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last implementation method specific reply code received.
|
|
If the ICMP Echo capability is being used then a successful
|
|
probe ends when an ICMP response is received that contains
|
|
the code ICMP_ECHOREPLY(0). The ICMP responses are defined
|
|
normally in the ip_icmp include file."
|
|
::= { nqaHistoryEntry 9 }
|
|
|
|
|
|
|
|
nqaMpingHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaMpingHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote Operations Mping test History Table for
|
|
storing the results of a test operation."
|
|
::= { nqaHistory 2 }
|
|
|
|
nqaMpingHistoryEntry OBJECT-TYPE
|
|
SYNTAX NqaMpingHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a test
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding nqaAdminParaHistoryRowMax."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMpingHistoryIndex, nqaMpingHistoryReceiverIndex, nqaMpingHistoryResponseIndex }
|
|
::= { nqaMpingHistoryTable 1 }
|
|
|
|
NqaMpingHistoryEntry ::=
|
|
SEQUENCE {
|
|
nqaMpingHistoryIndex
|
|
Integer32,
|
|
nqaMpingHistoryReceiverIndex
|
|
Integer32,
|
|
nqaMpingHistoryResponseIndex
|
|
Integer32,
|
|
nqaMpingHistoryAddressType
|
|
InetAddressType,
|
|
nqaMpingHistoryAddress
|
|
InetAddress,
|
|
nqaMpingHistoryReceiverAddress
|
|
InetAddress,
|
|
nqaMpingHistoryTimeStamp
|
|
DateAndTime,
|
|
nqaMpingHistoryCompletionTime
|
|
Integer32,
|
|
nqaMpingHistoryFinishState
|
|
INTEGER,
|
|
nqaMpingHistoryLastRC
|
|
Integer32,
|
|
nqaMpingHistoryFibHit
|
|
TruthValue
|
|
}
|
|
|
|
nqaMpingHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mping history table index and times for dispatching dependency tests."
|
|
::= { nqaMpingHistoryEntry 1 }
|
|
|
|
nqaMpingHistoryReceiverIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of receiver ,that received mping request packets and response reply packets ."
|
|
::= { nqaMpingHistoryEntry 2 }
|
|
|
|
nqaMpingHistoryResponseIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of response packets send by receiver"
|
|
::= { nqaMpingHistoryEntry 3 }
|
|
|
|
nqaMpingHistoryAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of history records."
|
|
::= { nqaMpingHistoryEntry 4 }
|
|
|
|
nqaMpingHistoryAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of tests. "
|
|
::= { nqaMpingHistoryEntry 5 }
|
|
|
|
nqaMpingHistoryReceiverAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of response package of tests. "
|
|
::= { nqaMpingHistoryEntry 6 }
|
|
|
|
|
|
nqaMpingHistoryTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time stamp of a probe."
|
|
::= { nqaMpingHistoryEntry 7 }
|
|
|
|
|
|
nqaMpingHistoryCompletionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The completion time of a probe in milliseconds."
|
|
::= { nqaMpingHistoryEntry 8 }
|
|
|
|
nqaMpingHistoryFinishState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
success(1),
|
|
timeout(2),
|
|
drop(3),
|
|
busy(4),
|
|
overThreshold(5),
|
|
disconnected(6),
|
|
noConnected(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of a test operation made by a remote
|
|
host for a particular probe."
|
|
::= { nqaMpingHistoryEntry 9 }
|
|
|
|
nqaMpingHistoryLastRC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last reply code received."
|
|
::= { nqaMpingHistoryEntry 10 }
|
|
|
|
nqaMpingHistoryFibHit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the fib is hit on the device which received the packet."
|
|
::= { nqaMpingHistoryEntry 11 }
|
|
|
|
nqaMtracertHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaMtracertHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote MtracertOperations test History Table for
|
|
storing the results of a test operation."
|
|
::= { nqaHistory 3 }
|
|
|
|
nqaMtracertHistoryEntry OBJECT-TYPE
|
|
SYNTAX NqaMtracertHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a test
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding nqaAdminParaHistoryRowMax."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertHistoryIndex, nqaMtracertHistoryHopIndex }
|
|
::= { nqaMtracertHistoryTable 1 }
|
|
|
|
|
|
NqaMtracertHistoryEntry ::=
|
|
SEQUENCE {
|
|
nqaMtracertHistoryIndex
|
|
Integer32,
|
|
nqaMtracertHistoryHopIndex
|
|
Integer32,
|
|
nqaMtracertHistoryAddressType
|
|
InetAddressType,
|
|
nqaMtracertHistoryAddress
|
|
InetAddress,
|
|
nqaMtracertHistoryTimeStamp
|
|
DateAndTime,
|
|
nqaMtracertHistoryCompletionTime
|
|
Integer32,
|
|
nqaMtracertHistoryLastRC
|
|
Integer32,
|
|
nqaMtracertHistoryCurQueryMode
|
|
INTEGER,
|
|
nqaMtracertHistoryQueryArrivalTime
|
|
Unsigned32,
|
|
nqaMtracertHistoryIncomingIfAddress
|
|
InetAddress,
|
|
nqaMtracertHistoryOutgoingIfAddress
|
|
InetAddress,
|
|
nqaMtracertHistoryPreHopRouterAddress
|
|
InetAddress,
|
|
nqaMtracertHistoryInputPacketCount
|
|
Gauge32,
|
|
nqaMtracertHistoryOutputPacketCount
|
|
Gauge32,
|
|
nqaMtracertHistoryTotalSGPacketCount
|
|
Gauge32,
|
|
nqaMtracertHistoryRtgProtocol
|
|
INTEGER,
|
|
nqaMtracertHistoryFwdTTL
|
|
Gauge32,
|
|
nqaMtracertHistoryFwdCode
|
|
INTEGER,
|
|
nqaMtracertHistroyFinishState
|
|
INTEGER
|
|
}
|
|
|
|
nqaMtracertHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mtracert history table index and times for dispatching dependency tests."
|
|
::= { nqaMtracertHistoryEntry 1 }
|
|
|
|
nqaMtracertHistoryHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of Mtracert hop. "
|
|
::= { nqaMtracertHistoryEntry 2 }
|
|
|
|
nqaMtracertHistoryAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of history records."
|
|
::= { nqaMtracertHistoryEntry 3 }
|
|
|
|
nqaMtracertHistoryAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of tests. For Traceroute, it is the destination address of each hop. "
|
|
::= { nqaMtracertHistoryEntry 4 }
|
|
|
|
|
|
nqaMtracertHistoryTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time stamp of a probe."
|
|
::= { nqaMtracertHistoryEntry 5 }
|
|
|
|
|
|
nqaMtracertHistoryCompletionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time measured in milliseconds from when
|
|
a probe was sent to when its response was received or
|
|
when it timed out. The value of this object is reported
|
|
as 0 when it is not possible to transmit a probe."
|
|
::= { nqaMtracertHistoryEntry 6 }
|
|
|
|
|
|
nqaMtracertHistoryLastRC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last implementation method specific reply code received.
|
|
If the ICMP Echo capability is being used then a successful
|
|
probe ends when an ICMP response is received that contains
|
|
the code ICMP_ECHOREPLY(0). The ICMP responses are defined
|
|
normally in the ip_icmp include file."
|
|
::= { nqaMtracertHistoryEntry 7 }
|
|
|
|
|
|
nqaMtracertHistoryCurQueryMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
maxHops (1) ,
|
|
hopByHop (2)
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current query mode."
|
|
::= { nqaMtracertHistoryEntry 8 }
|
|
|
|
nqaMtracertHistoryQueryArrivalTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Query Arrival Time is a 32-bit NTP timestamp specifying
|
|
the arrival time of the traceroute request packet at this router."
|
|
::= { nqaMtracertHistoryEntry 9 }
|
|
|
|
nqaMtracertHistoryIncomingIfAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field specifies the address of the interface on which packets from
|
|
this source and group are expected to arrive, or 0 if unknown."
|
|
::= { nqaMtracertHistoryEntry 10 }
|
|
|
|
nqaMtracertHistoryOutgoingIfAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field specifies the address of the interface on which packets from this source
|
|
and group flow to the specified destination, or 0 if unknown."
|
|
::= { nqaMtracertHistoryEntry 11 }
|
|
|
|
nqaMtracertHistoryPreHopRouterAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field specifies the router from
|
|
which this router expects packets from this source. "
|
|
::= { nqaMtracertHistoryEntry 12 }
|
|
|
|
nqaMtracertHistoryInputPacketCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field contains the number of multicast packets received for
|
|
all groups and sources on the incoming interface, or 0xffffffff if
|
|
no count can be reported. This counter should have the same
|
|
value as ifInMulticastPkts from the IF-MIB for this interface."
|
|
::= { nqaMtracertHistoryEntry 13 }
|
|
|
|
|
|
nqaMtracertHistoryOutputPacketCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field contains the number of multicast packets that have
|
|
been transmitted or queued for transmission for all groups and
|
|
sources on the outgoing interface, or 0xffffffff if no count can
|
|
be reported. This counter should have the same value as
|
|
ifOutMulti-castPkts from the IF-MIB for this interface."
|
|
::= { nqaMtracertHistoryEntry 14 }
|
|
|
|
|
|
nqaMtracertHistoryTotalSGPacketCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field counts the number of packets from the specified source
|
|
forwarded by this router to the specified group, or 0xffffffff if
|
|
no count can be reported. This counter should have the same value as
|
|
ipMRoutePkts from the IPMROUTE-STD-MIB for this forwarding entry."
|
|
::= { nqaMtracertHistoryEntry 15 }
|
|
|
|
|
|
nqaMtracertHistoryRtgProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dvmrp(1),
|
|
mospf(2),
|
|
pim(3),
|
|
cbt(4) ,
|
|
pimUsingSpecRteTab(5) ,
|
|
pimUsingStaticRte(6) ,
|
|
dvmrpUsingStaticRte(7),
|
|
pimUsingMBGPRte(8) ,
|
|
cbtUsingSpecRteTab(9),
|
|
cbtUsingStaticRte(10) ,
|
|
pimUsingState(11),
|
|
unknownProtocol(255)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field describes the routing protocol in use between this
|
|
router and the previous-hop router."
|
|
::= { nqaMtracertHistoryEntry 16 }
|
|
|
|
|
|
nqaMtracertHistoryFwdTTL OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field contains the TTL that a packet is required to
|
|
have before it will be forwarded over the outgoing interface."
|
|
::= { nqaMtracertHistoryEntry 17 }
|
|
|
|
|
|
nqaMtracertHistoryFwdCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noError(1),
|
|
wrongIf(2),
|
|
pruneSent(3),
|
|
pruneRCVD(4),
|
|
scoped(5),
|
|
noRoute(6),
|
|
wrongLastHop(7),
|
|
notForwarding(8) ,
|
|
reachedRP(9) ,
|
|
noMulticast(11),
|
|
infoHidden(12),
|
|
noSpace(130),
|
|
oldRouter(131) ,
|
|
adminProhib(132),
|
|
unknownError(255)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field contains a forwarding information/error code.
|
|
noError(1): No error
|
|
wrongIf(2): Traceroute request arrived on an interface to
|
|
which this router would not forward for this
|
|
source,group,destination.
|
|
pruneSent(3): This router has sent a prune upstream which
|
|
applies to the source and group in the tracer-
|
|
oute request.
|
|
pruneRCVD(4): This router has stopped forwarding for this
|
|
source and group in response to a request from
|
|
the next hop router.
|
|
scoped(5): The group is subject to administrative scoping
|
|
at this hop.
|
|
noRoute(6): This router has no route for the source or
|
|
group and no way to determine a potential
|
|
route.
|
|
wrongLastHop(7): This router is not the proper last-hop router.
|
|
notForwarding(8):This router is not forwarding this
|
|
source,group out the outgoing interface for an
|
|
unspecified reason.
|
|
reachedRP(9): Reached Rendez-vous Point or Core
|
|
rpfIf(10): Traceroute request arrived on the expected RPF
|
|
interface for this source,group.
|
|
noMulticast(11): Traceroute request arrived on an interface
|
|
which is not enabled for multicast.
|
|
infoHidden(12): One or more hops have been hidden from this
|
|
trace.
|
|
noSpace(13): There was not enough room to insert another
|
|
response data block in the packet.
|
|
oldRouter(14): The previous hop router does not understand
|
|
traceroute requests.
|
|
adminProhib(15): Traceroute is administratively prohibited.
|
|
"
|
|
::= { nqaMtracertHistoryEntry 18 }
|
|
|
|
nqaMtracertHistroyFinishState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
success(1),
|
|
timeout(2),
|
|
busy(3),
|
|
drop(4),
|
|
overThreshold(5),
|
|
disconnected(6),
|
|
noConnected(7)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The finish state of a probe."
|
|
::= { nqaMtracertHistoryEntry 19 }
|
|
|
|
nqaVplsMacTracertHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaVplsMacTracertHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the VPLS mac trace Operations test History Table for
|
|
storing the results of a test operation."
|
|
::= { nqaHistory 4 }
|
|
|
|
nqaVplsMacTracertHistoryEntry OBJECT-TYPE
|
|
SYNTAX NqaVplsMacTracertHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a test
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding nqaAdminParaHistoryRowMax."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMacTracertHistoryIndex, nqaVplsMacTracertHistoryHopIndex, nqaVplsMacTracertHistoryResponseIndex }
|
|
|
|
::= { nqaVplsMacTracertHistoryTable 1 }
|
|
|
|
|
|
NqaVplsMacTracertHistoryEntry ::=
|
|
SEQUENCE {
|
|
nqaVplsMacTracertHistoryIndex
|
|
Integer32,
|
|
nqaVplsMacTracertHistoryHopIndex
|
|
Integer32,
|
|
nqaVplsMacTracertHistoryResponseIndex
|
|
Integer32,
|
|
nqaVplsMacTracertHistoryTimeStamp
|
|
DateAndTime,
|
|
nqaVplsMacTracertHistoryAddressType
|
|
InetAddressType,
|
|
nqaVplsMacTracertHistoryAddress
|
|
InetAddress,
|
|
nqaVplsMacTracertHistoryCompletionTime
|
|
Integer32,
|
|
nqaVplsMacTracertHistoryFinishState
|
|
INTEGER,
|
|
nqaVplsMacTracertHistoryHitFlag
|
|
TruthValue,
|
|
nqaVplsMacTracertHistoryDSCount
|
|
Integer32,
|
|
nqaVplsMacTracertHistorySuccessPathNode
|
|
TruthValue
|
|
}
|
|
|
|
nqaVplsMacTracertHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPLS mac trace history table index and times for dispatching dependency tests."
|
|
::= { nqaVplsMacTracertHistoryEntry 1 }
|
|
|
|
nqaVplsMacTracertHistoryHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of VPLS mac trace hop. "
|
|
::= { nqaVplsMacTracertHistoryEntry 2 }
|
|
|
|
nqaVplsMacTracertHistoryResponseIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of VPLS mac trace reply packet per hop."
|
|
::= { nqaVplsMacTracertHistoryEntry 3 }
|
|
|
|
nqaVplsMacTracertHistoryTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time stamp of a probe."
|
|
::= { nqaVplsMacTracertHistoryEntry 4 }
|
|
|
|
nqaVplsMacTracertHistoryAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of history records."
|
|
::= { nqaVplsMacTracertHistoryEntry 5 }
|
|
|
|
nqaVplsMacTracertHistoryAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of tests. For Traceroute, it is the destination address of each hop. "
|
|
::= { nqaVplsMacTracertHistoryEntry 6 }
|
|
|
|
nqaVplsMacTracertHistoryCompletionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The completion time of a probe in milliseconds.
|
|
The amount of time measured in milliseconds from when
|
|
a probe was sent to when its response was received or
|
|
when it timed out. The value of this object is reported
|
|
as 0 when it is not possible to transmit a probe."
|
|
::= { nqaVplsMacTracertHistoryEntry 7 }
|
|
|
|
|
|
nqaVplsMacTracertHistoryFinishState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
success(1),
|
|
timeout(2),
|
|
drop(3),
|
|
busy(4),
|
|
overThreshold(5),
|
|
disconnected(6),
|
|
noConnected(7)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The finish state of a probe."
|
|
::= { nqaVplsMacTracertHistoryEntry 8 }
|
|
|
|
|
|
nqaVplsMacTracertHistoryHitFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Hit Flag."
|
|
::= { nqaVplsMacTracertHistoryEntry 9 }
|
|
|
|
|
|
nqaVplsMacTracertHistoryDSCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'7FFFFFFF'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of Downstreams."
|
|
::= { nqaVplsMacTracertHistoryEntry 10 }
|
|
|
|
|
|
nqaVplsMacTracertHistorySuccessPathNode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether it is a node along the path that passes the Trace test. By default, the value is false, indicating that the object is not a node along the path that passes the Trace test."
|
|
-- DEFVAL { false }
|
|
::= { nqaVplsMacTracertHistoryEntry 11 }
|
|
|
|
|
|
|
|
|
|
nqaVplsMacTracertHistoryDSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaVplsMacTracertHistoryDSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the VPLS mac trace Operations test History Downstreanm Table for
|
|
storing the results of a test operation."
|
|
::= { nqaHistory 5 }
|
|
|
|
nqaVplsMacTracertHistoryDSEntry OBJECT-TYPE
|
|
SYNTAX NqaVplsMacTracertHistoryDSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a test
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding nqaAdminParaHistoryRowMax."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMacTracertHistoryIndex, nqaVplsMacTracertHistoryHopIndex, nqaVplsMacTracertHistoryResponseIndex, nqaVplsMacTracertHistoryDSIndex }
|
|
|
|
::= { nqaVplsMacTracertHistoryDSTable 1 }
|
|
|
|
|
|
NqaVplsMacTracertHistoryDSEntry ::=
|
|
SEQUENCE {
|
|
nqaVplsMacTracertHistoryDSIndex
|
|
Integer32,
|
|
nqaVplsMacTracertHistoryDSAddress
|
|
InetAddress
|
|
}
|
|
|
|
nqaVplsMacTracertHistoryDSIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPLS mac trace history DS table index."
|
|
::= { nqaVplsMacTracertHistoryDSEntry 1 }
|
|
|
|
nqaVplsMacTracertHistoryDSAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DS address."
|
|
::= { nqaVplsMacTracertHistoryDSEntry 2 }
|
|
|
|
nqaVplsMTraceHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaVplsMTraceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the remote vpls multicast trace operations test history table for
|
|
storing the results of a test operation."
|
|
::= { nqaHistory 6 }
|
|
|
|
nqaVplsMTraceHistoryEntry OBJECT-TYPE
|
|
SYNTAX NqaVplsMTraceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a test
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding nqaAdminParaHistoryRowMax."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMTraceHistoryIndex, nqaVplsMTraceHistoryHopIndex, nqaVplsMTraceHistoryResponseIndex }
|
|
::= { nqaVplsMTraceHistoryTable 1 }
|
|
|
|
NqaVplsMTraceHistoryEntry ::=
|
|
SEQUENCE {
|
|
nqaVplsMTraceHistoryIndex
|
|
Integer32,
|
|
nqaVplsMTraceHistoryHopIndex
|
|
Integer32,
|
|
nqaVplsMTraceHistoryResponseIndex
|
|
Integer32,
|
|
nqaVplsMTraceHistoryResponserAddressType
|
|
InetAddressType,
|
|
nqaVplsMTraceHistoryResponserAddress
|
|
InetAddress,
|
|
nqaVplsMTraceHistoryUpStreamAddressType
|
|
InetAddressType,
|
|
nqaVplsMTraceHistoryUpStreamAddress
|
|
InetAddress,
|
|
nqaVplsMTraceHistoryReceivedTtl
|
|
Unsigned32,
|
|
nqaVplsMTraceHistoryIGMPVersion
|
|
INTEGER,
|
|
nqaVplsMTraceHistoryIGMPSnpgEnable
|
|
EnableValue,
|
|
nqaVplsMTraceHistoryIGMPProxyEnable
|
|
EnableValue,
|
|
nqaVplsMTraceHistoryIGMPRouterPortLearningEnable
|
|
EnableValue,
|
|
nqaVplsMTraceHistoryRequireRouterAlertEnable
|
|
EnableValue,
|
|
nqaVplsMTraceHistoryForwardMode
|
|
INTEGER,
|
|
nqaVplsMTraceHistoryHitFlag
|
|
TruthValue,
|
|
nqaVplsMTraceHistoryPWExist
|
|
TruthValue,
|
|
nqaVplsMTraceHistoryGroupPolicy
|
|
INTEGER,
|
|
nqaVplsMTraceHistoryCACExist
|
|
INTEGER,
|
|
nqaVplsMTraceHistoryRcvQueryCount
|
|
Gauge32,
|
|
nqaVplsMTraceHistoryRcvReportCount
|
|
Gauge32,
|
|
nqaVplsMTraceHistoryRcvLeaveCount
|
|
Gauge32,
|
|
nqaVplsMTraceHistoryTimeStamp
|
|
DateAndTime,
|
|
nqaVplsMTraceHistoryCompletionTime
|
|
Integer32,
|
|
nqaVplsMTraceHistoryLastRC
|
|
Integer32,
|
|
nqaVplsMTraceHistoryLastRSC
|
|
Integer32,
|
|
nqaVplsMTraceHistoryFinishState
|
|
INTEGER,
|
|
nqaVplsMTraceHistorySuccessPathNode
|
|
INTEGER
|
|
}
|
|
|
|
nqaVplsMTraceHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vpls multicast trace history table index and times for dispatching dependency tests."
|
|
::= { nqaVplsMTraceHistoryEntry 1 }
|
|
|
|
nqaVplsMTraceHistoryHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of vpls multicast trace hop. "
|
|
::= { nqaVplsMTraceHistoryEntry 2 }
|
|
|
|
nqaVplsMTraceHistoryResponseIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of vpls multicast trace responser. "
|
|
::= { nqaVplsMTraceHistoryEntry 3 }
|
|
|
|
nqaVplsMTraceHistoryResponserAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of history record's Responser address."
|
|
::= { nqaVplsMTraceHistoryEntry 4 }
|
|
|
|
nqaVplsMTraceHistoryResponserAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Responser address of tests."
|
|
::= { nqaVplsMTraceHistoryEntry 5 }
|
|
|
|
nqaVplsMTraceHistoryUpStreamAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of history records' last hop address."
|
|
::= { nqaVplsMTraceHistoryEntry 6 }
|
|
|
|
nqaVplsMTraceHistoryUpStreamAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last hop address of tests."
|
|
::= { nqaVplsMTraceHistoryEntry 7 }
|
|
|
|
nqaVplsMTraceHistoryReceivedTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
UNITS "time-to-live value"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ttl in the received packet."
|
|
::= { nqaVplsMTraceHistoryEntry 8 }
|
|
|
|
nqaVplsMTraceHistoryIGMPVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
igmpv1(1),
|
|
igmpv2(2),
|
|
igmpv3(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP protocol version."
|
|
::= { nqaVplsMTraceHistoryEntry 9 }
|
|
|
|
nqaVplsMTraceHistoryIGMPSnpgEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP snooping enable state."
|
|
::= { nqaVplsMTraceHistoryEntry 10 }
|
|
|
|
nqaVplsMTraceHistoryIGMPProxyEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP proxy enable switch."
|
|
::= { nqaVplsMTraceHistoryEntry 11 }
|
|
|
|
nqaVplsMTraceHistoryIGMPRouterPortLearningEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IGMP router port learning enable switch."
|
|
::= { nqaVplsMTraceHistoryEntry 12 }
|
|
|
|
nqaVplsMTraceHistoryRequireRouterAlertEnable OBJECT-TYPE
|
|
SYNTAX EnableValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route alert requirement enable switch."
|
|
::= { nqaVplsMTraceHistoryEntry 13 }
|
|
|
|
nqaVplsMTraceHistoryForwardMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mac(1),
|
|
ip(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forward mode value."
|
|
::= { nqaVplsMTraceHistoryEntry 14 }
|
|
|
|
nqaVplsMTraceHistoryHitFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the fib is hit on the device which received the packet."
|
|
::= { nqaVplsMTraceHistoryEntry 15 }
|
|
|
|
nqaVplsMTraceHistoryPWExist OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the forward PW is exist."
|
|
::= { nqaVplsMTraceHistoryEntry 16 }
|
|
|
|
nqaVplsMTraceHistoryGroupPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL judge result."
|
|
::= { nqaVplsMTraceHistoryEntry 17 }
|
|
|
|
nqaVplsMTraceHistoryCACExist OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the connection admission control comfiguration of current VSI is exist."
|
|
::= { nqaVplsMTraceHistoryEntry 18 }
|
|
|
|
nqaVplsMTraceHistoryRcvQueryCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received query packet number for current IGMP version of current VSI."
|
|
::= { nqaVplsMTraceHistoryEntry 19 }
|
|
|
|
nqaVplsMTraceHistoryRcvReportCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received report packet number for current IGMP version of current VSI."
|
|
::= { nqaVplsMTraceHistoryEntry 20 }
|
|
|
|
nqaVplsMTraceHistoryRcvLeaveCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received leave packet number for current IGMP version of current VSI."
|
|
::= { nqaVplsMTraceHistoryEntry 21 }
|
|
|
|
nqaVplsMTraceHistoryTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time stamp of a probe."
|
|
::= { nqaVplsMTraceHistoryEntry 22 }
|
|
|
|
nqaVplsMTraceHistoryCompletionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time measured in milliseconds from when
|
|
a probe was sent to when its response was received or
|
|
when it timed out. The value of this object is reported
|
|
as 0 when it is not possible to transmit a probe."
|
|
::= { nqaVplsMTraceHistoryEntry 23 }
|
|
|
|
nqaVplsMTraceHistoryLastRC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last implementation method specific reply code received."
|
|
::= { nqaVplsMTraceHistoryEntry 24 }
|
|
|
|
nqaVplsMTraceHistoryLastRSC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last implementation method specific reply sub code received."
|
|
::= { nqaVplsMTraceHistoryEntry 25 }
|
|
|
|
nqaVplsMTraceHistoryFinishState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
success(1),
|
|
timeout(2),
|
|
drop(3),
|
|
busy(4),
|
|
overThreshold(5),
|
|
disconnected(6),
|
|
noConnected(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The finish state of a probe."
|
|
::= { nqaVplsMTraceHistoryEntry 26 }
|
|
|
|
nqaVplsMTraceHistorySuccessPathNode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
onPath(1),
|
|
notonPath(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the response router is on the path of a probe. The default value is notonPath(2)."
|
|
-- DEFVAL { 2 }
|
|
::= { nqaVplsMTraceHistoryEntry 27 }
|
|
|
|
|
|
nqaMacTraceHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaMacTraceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines a list of historical MAC trace test instances for storing the running results of test instances."
|
|
::= { nqaHistory 7 }
|
|
|
|
|
|
nqaMacTraceHistoryEntry OBJECT-TYPE
|
|
SYNTAX NqaMacTraceHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines a table for storing the running results of test instances.
|
|
The number of entries in this table is limited by the value of nqaAdminParaHistoryRowMax.
|
|
"
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMacTraceHistoryIndex, nqaMacTraceHistoryReceiveOrder }
|
|
::= { nqaMacTraceHistoryTable 1 }
|
|
|
|
|
|
NqaMacTraceHistoryEntry ::=
|
|
SEQUENCE {
|
|
nqaMacTraceHistoryIndex
|
|
Integer32,
|
|
nqaMacTraceHistoryReceiveOrder
|
|
Integer32,
|
|
nqaMacTraceHistoryTTL
|
|
Integer32,
|
|
nqaMacTraceHistorySeqNumber
|
|
Unsigned32,
|
|
nqaMacTraceHistoryCompletionTime
|
|
Integer32,
|
|
nqaMacTraceHistoryForwarded
|
|
TruthValue,
|
|
nqaMacTraceHistoryTerminalMep
|
|
TruthValue,
|
|
nqaMacTraceHistoryRelayAction
|
|
HWDot1agCfmRelayActionFieldValue,
|
|
nqaMacTraceHistoryIngressAction
|
|
HWDot1agCfmIngressActionFieldValue,
|
|
nqaMacTraceHistoryIngressMac
|
|
MacAddress,
|
|
nqaMacTraceHistoryIngressIfName
|
|
OCTET STRING,
|
|
nqaMacTraceHistoryEgressAction
|
|
HWDot1agCfmEgressActionFieldValue,
|
|
nqaMacTraceHistoryEgressMac
|
|
MacAddress,
|
|
nqaMacTraceHistoryEgressIfName
|
|
OCTET STRING
|
|
}
|
|
|
|
nqaMacTraceHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the index of the MAC tract history table and the number of times for dispatching dependency tests."
|
|
::= { nqaMacTraceHistoryEntry 1 }
|
|
|
|
|
|
nqaMacTraceHistoryReceiveOrder OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the sequence in which LTRs are received."
|
|
::= { nqaMacTraceHistoryEntry 2 }
|
|
|
|
|
|
nqaMacTraceHistoryTTL OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the TTL of the LTR."
|
|
::= { nqaMacTraceHistoryEntry 3 }
|
|
|
|
|
|
nqaMacTraceHistorySeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the sequence number of the LTR."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.5"
|
|
::= { nqaMacTraceHistoryEntry 4 }
|
|
|
|
nqaMacTraceHistoryCompletionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the RTT (ms) of the response packet."
|
|
::= { nqaMacTraceHistoryEntry 5 }
|
|
|
|
nqaMacTraceHistoryForwarded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the device that sends LTRs continues to forward LTMs."
|
|
::= { nqaMacTraceHistoryEntry 6 }
|
|
|
|
|
|
nqaMacTraceHistoryTerminalMep OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the LTR is sent by an MEP."
|
|
::= { nqaMacTraceHistoryEntry 7 }
|
|
|
|
|
|
nqaMacTraceHistoryRelayAction OBJECT-TYPE
|
|
SYNTAX HWDot1agCfmRelayActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the value of the Relay Action field in the LTR."
|
|
::= { nqaMacTraceHistoryEntry 8 }
|
|
|
|
|
|
nqaMacTraceHistoryIngressAction OBJECT-TYPE
|
|
SYNTAX HWDot1agCfmIngressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the value of the Ingress Action field in the LTR."
|
|
::= { nqaMacTraceHistoryEntry 9 }
|
|
|
|
|
|
nqaMacTraceHistoryIngressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the physical MAC address carried in the ingress MAC address field in the LTR."
|
|
::= { nqaMacTraceHistoryEntry 10 }
|
|
|
|
|
|
nqaMacTraceHistoryIngressIfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the inbound interface of the LTR."
|
|
::= { nqaMacTraceHistoryEntry 11 }
|
|
|
|
|
|
nqaMacTraceHistoryEgressAction OBJECT-TYPE
|
|
SYNTAX HWDot1agCfmEgressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the value of the Egress Action field in the LTR."
|
|
::= { nqaMacTraceHistoryEntry 12 }
|
|
|
|
|
|
nqaMacTraceHistoryEgressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MAC address in the Egress MAC address field of the LTR."
|
|
::= { nqaMacTraceHistoryEntry 13 }
|
|
|
|
|
|
nqaMacTraceHistoryEgressIfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the interface that forwards the LTR."
|
|
::= { nqaMacTraceHistoryEntry 14 }
|
|
|
|
nqaMultiPathHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaMultiPathHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Remote Operations test History Table for
|
|
storing the results of a test operation."
|
|
::= { nqaHistory 8 }
|
|
|
|
nqaMultiPathHistoryEntry OBJECT-TYPE
|
|
SYNTAX NqaMultiPathHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines a table for storing the results of a test
|
|
operation. Entries in this table are limited by
|
|
the value of the corresponding nqaAdminParaHistoryRowMax."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMultiPathHistoryIndex, nqaMultiPathHistoryPathIndex, nqaMultiPathHistoryHopIndex, nqaMultiPathHistoryProbeIndex }
|
|
::= { nqaMultiPathHistoryTable 1 }
|
|
|
|
NqaMultiPathHistoryEntry ::=
|
|
SEQUENCE {
|
|
nqaMultiPathHistoryIndex
|
|
Integer32,
|
|
nqaMultiPathHistoryPathIndex
|
|
Integer32,
|
|
nqaMultiPathHistoryHopIndex
|
|
Integer32,
|
|
nqaMultiPathHistoryProbeIndex
|
|
Integer32,
|
|
nqaMultiPathHistoryTimeStamp
|
|
DateAndTime,
|
|
nqaMultiPathHistoryAddressType
|
|
InetAddressType,
|
|
nqaMultiPathHistoryAddress
|
|
InetAddress,
|
|
nqaMultiPathHistoryCompletionTime
|
|
Integer32,
|
|
nqaMultiPathHistoryFinishState
|
|
INTEGER,
|
|
nqaMultiPathHistoryLastRC
|
|
Integer32
|
|
}
|
|
|
|
nqaMultiPathHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history table index and times for dispatching dependency tests."
|
|
::= { nqaMultiPathHistoryEntry 1 }
|
|
|
|
nqaMultiPathHistoryPathIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path index."
|
|
::= { nqaMultiPathHistoryEntry 2 }
|
|
|
|
nqaMultiPathHistoryHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1."
|
|
::= { nqaMultiPathHistoryEntry 3 }
|
|
|
|
nqaMultiPathHistoryProbeIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The probe index of tests."
|
|
::= { nqaMultiPathHistoryEntry 4 }
|
|
|
|
nqaMultiPathHistoryTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time stamp of a probe."
|
|
::= { nqaMultiPathHistoryEntry 5 }
|
|
|
|
nqaMultiPathHistoryAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address type of history records."
|
|
::= { nqaMultiPathHistoryEntry 6 }
|
|
|
|
nqaMultiPathHistoryAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of tests. For Traceroute, it is the destination address of each hop. "
|
|
::= { nqaMultiPathHistoryEntry 7 }
|
|
|
|
nqaMultiPathHistoryCompletionTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time from when a probe was sent to when its response was received or
|
|
when it timed out. The value of this object is reported
|
|
as 0 when it is not possible to transmit a probe."
|
|
::= { nqaMultiPathHistoryEntry 8 }
|
|
|
|
nqaMultiPathHistoryFinishState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
success(1),
|
|
timeout(2),
|
|
drop(3),
|
|
busy(4),
|
|
overThreshold(5),
|
|
disconnected(6),
|
|
noConnected(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of a test operation made by a remote
|
|
host for a particular probe."
|
|
::= { nqaMultiPathHistoryEntry 9 }
|
|
|
|
nqaMultiPathHistoryLastRC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last implementation method specific reply code received."
|
|
::= { nqaMultiPathHistoryEntry 10 }
|
|
|
|
|
|
nqaNotifications OBJECT IDENTIFIER ::= { nqa 6}
|
|
|
|
nqaResultsProbeFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaResultsAddressType,
|
|
nqaResultsAddress,
|
|
nqaResultsCompletionTimeMin,
|
|
nqaResultsCompletionTimeMax,
|
|
nqaResultsSumCompletionTime,
|
|
nqaResultsProbeResponses,
|
|
nqaResultsSentProbes,
|
|
nqaResultsSumCompletionTime2Low,
|
|
nqaResultsSumCompletionTime2High,
|
|
nqaResultsLastGoodProbe,
|
|
nqaResultsLastGoodPath
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a probe failure is detected when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
probeFailure(0) subject to the value of
|
|
nqaAdminParaTrapProbeFailureFilter. The object
|
|
nqaAdminParaTrapProbeFailureFilter can be used to specify the
|
|
number of successive probe failures that are required
|
|
before this notification can be generated. (except for HTTP or Jitter or FTP)"
|
|
::= { nqaNotifications 1 }
|
|
|
|
nqaResultsTestFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaResultsAddressType,
|
|
nqaResultsAddress,
|
|
nqaResultsCompletionTimeMin,
|
|
nqaResultsCompletionTimeMax,
|
|
nqaResultsSumCompletionTime,
|
|
nqaResultsProbeResponses,
|
|
nqaResultsSentProbes,
|
|
nqaResultsSumCompletionTime2Low,
|
|
nqaResultsSumCompletionTime2High,
|
|
nqaResultsLastGoodProbe,
|
|
nqaResultsLastGoodPath
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a nqa test is determined to have failed
|
|
when the corresponding nqaAdminParaTrapGeneration object is
|
|
set to testFailure(1). In this instance
|
|
nqaAdminParaTrapTestFailureFilter should specify the number of
|
|
probes in a test required to have failed in order to
|
|
consider the test as failed. (Except for HTTP or Jitter or FTP)"
|
|
::= { nqaNotifications 2 }
|
|
|
|
nqaResultsTestCompleted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaResultsAddressType,
|
|
nqaResultsAddress,
|
|
nqaResultsCompletionTimeMin,
|
|
nqaResultsCompletionTimeMax,
|
|
nqaResultsSumCompletionTime,
|
|
nqaResultsProbeResponses,
|
|
nqaResultsSentProbes,
|
|
nqaResultsSumCompletionTime2Low,
|
|
nqaResultsSumCompletionTime2High,
|
|
nqaResultsLastGoodProbe,
|
|
nqaResultsLastGoodPath
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated at the completion of a nqa test when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
testCompletion(2).(except for HTTP or Jitter or FTP)"
|
|
::= { nqaNotifications 3 }
|
|
|
|
nqaResultsThresholdNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaResultsAddressType,
|
|
nqaResultsAddress,
|
|
nqaAdminCtrlThreshold1,
|
|
nqaResultsCompletionTimeMax,
|
|
nqaResultsRTDOverThresholds
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1,
|
|
the system sends trap information.(except for HTTP or Jitter or FTP)"
|
|
::= { nqaNotifications 4 }
|
|
|
|
|
|
nqaHTTPStatsProbeFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaHTTPStatsDNSRTTSum,
|
|
nqaHTTPStatsTCPConnectRTTSum,
|
|
nqaHTTPStatsTransactionRTTSum,
|
|
nqaHTTPStatsDNSServerTimeouts,
|
|
nqaHTTPStatsTCPConnectTimeouts,
|
|
nqaHTTPStatsTransactionTimeouts,
|
|
nqaHTTPStatsDNSQueryErrors,
|
|
nqaHTTPStatsTcpConnErrors,
|
|
nqaHTTPStatsErrors,
|
|
nqaHTTPStatsProbeResponses,
|
|
nqaHTTPStatsSendProbes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a probe failure is detected when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
probeFailure(0) subject to the value of
|
|
nqaAdminParaTrapProbeFailureFilter. The object
|
|
nqaAdminParaTrapProbeFailureFilter can be used to specify the
|
|
number of successive probe failures that are required
|
|
before this notification can be generated.(Only for HTTP)"
|
|
::= { nqaNotifications 5 }
|
|
|
|
nqaHTTPStatsTestFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaHTTPStatsDNSRTTSum,
|
|
nqaHTTPStatsTCPConnectRTTSum,
|
|
nqaHTTPStatsTransactionRTTSum,
|
|
nqaHTTPStatsDNSServerTimeouts,
|
|
nqaHTTPStatsTCPConnectTimeouts,
|
|
nqaHTTPStatsTransactionTimeouts,
|
|
nqaHTTPStatsDNSQueryErrors,
|
|
nqaHTTPStatsTcpConnErrors,
|
|
nqaHTTPStatsErrors,
|
|
nqaHTTPStatsProbeResponses,
|
|
nqaHTTPStatsSendProbes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a HTTP test is determined to have failed
|
|
when the corresponding nqaAdminParaTrapGeneration object is
|
|
set to testFailure(1). In this instance
|
|
nqaAdminParaTrapTestFailureFilter should specify the number of
|
|
probes in a test required to have failed in order to
|
|
consider the test as failed.(Only for HTTP)"
|
|
::= { nqaNotifications 6 }
|
|
|
|
nqaHTTPStatsTestCompleted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaHTTPStatsDNSRTTSum,
|
|
nqaHTTPStatsTCPConnectRTTSum,
|
|
nqaHTTPStatsTransactionRTTSum,
|
|
nqaHTTPStatsDNSServerTimeouts,
|
|
nqaHTTPStatsTCPConnectTimeouts,
|
|
nqaHTTPStatsTransactionTimeouts,
|
|
nqaHTTPStatsDNSQueryErrors,
|
|
nqaHTTPStatsTcpConnErrors,
|
|
nqaHTTPStatsErrors,
|
|
nqaHTTPStatsProbeResponses,
|
|
nqaHTTPStatsSendProbes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated at the completion of a HTTP test when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
testCompletion(2)."
|
|
::= { nqaNotifications 7 }
|
|
|
|
nqaHTTPStatsThresholdNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminCtrlThreshold1,
|
|
nqaAdminCtrlThreshold2,
|
|
nqaAdminCtrlThreshold3,
|
|
nqaHTTPStatsDNSRTTMax,
|
|
nqaHTTPStatsTCPConnectRTTMax,
|
|
nqaHTTPStatsTransactionRTTMax,
|
|
nqaHTTPStatsRTDOverThresholds
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1
|
|
or nqaAdminCtrlThreshold2 or nqaAdminCtrlThreshold3,
|
|
the system sends trap information.(Only for HTTP)"
|
|
::= { nqaNotifications 8 }
|
|
|
|
nqaJitterStatsProbeFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaJitterStatsRTTSum,
|
|
nqaJitterStatsRTTSum2Low,
|
|
nqaJitterStatsRTTSum2High,
|
|
nqaJitterStatsRTTMin,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsPacketOutOfSequences,
|
|
nqaJitterStatsErrors,
|
|
nqaJitterStatsBusies,
|
|
nqaJitterStatsTimeouts,
|
|
nqaJitterStatsDrops,
|
|
nqaJitterStatsProbeResponses,
|
|
nqaJitterStatsSentProbes,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsJitterOut,
|
|
nqaJitterStatsJitterIn,
|
|
nqaJitterStatsOWSumSD,
|
|
nqaJitterStatsOWSumDS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a probe failure is detected when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
probeFailure(0) subject to the value of
|
|
nqaAdminParaTrapProbeFailureFilter. The object
|
|
nqaAdminParaTrapProbeFailureFilter can be used to specify the
|
|
number of successive probe failures that are required
|
|
before this notification can be generated.(Only for Jitter)"
|
|
::= { nqaNotifications 9 }
|
|
|
|
nqaJitterStatsTestFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaJitterStatsRTTSum,
|
|
nqaJitterStatsRTTSum2Low,
|
|
nqaJitterStatsRTTSum2High,
|
|
nqaJitterStatsRTTMin,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsPacketOutOfSequences,
|
|
nqaJitterStatsErrors,
|
|
nqaJitterStatsBusies,
|
|
nqaJitterStatsTimeouts,
|
|
nqaJitterStatsDrops,
|
|
nqaJitterStatsProbeResponses,
|
|
nqaJitterStatsSentProbes,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsJitterOut,
|
|
nqaJitterStatsJitterIn,
|
|
nqaJitterStatsOWSumSD,
|
|
nqaJitterStatsOWSumDS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a Jitter test is determined to have failed
|
|
when the corresponding nqaAdminParaTrapGeneration object is
|
|
set to testFailure(1). In this instance
|
|
nqaAdminParaTrapTestFailureFilter should specify the number of
|
|
probes in a test required to have failed in order to
|
|
consider the test as failed.(Only for Jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)"
|
|
::= { nqaNotifications 10 }
|
|
|
|
nqaJitterStatsTestCompleted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaJitterStatsRTTSum,
|
|
nqaJitterStatsRTTSum2Low,
|
|
nqaJitterStatsRTTSum2High,
|
|
nqaJitterStatsRTTMin,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsPacketOutOfSequences,
|
|
nqaJitterStatsErrors,
|
|
nqaJitterStatsBusies,
|
|
nqaJitterStatsTimeouts,
|
|
nqaJitterStatsDrops,
|
|
nqaJitterStatsProbeResponses,
|
|
nqaJitterStatsSentProbes,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsJitterOut,
|
|
nqaJitterStatsJitterIn,
|
|
nqaJitterStatsOWSumSD,
|
|
nqaJitterStatsOWSumDS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated at the completion of a Jitter test when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
testCompletion(2). (Only for Jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)"
|
|
::= { nqaNotifications 11 }
|
|
|
|
nqaFTPStatsProbeFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaFTPStatsCtrlConnMaxTime,
|
|
nqaFTPStatsDataConnMaxTime,
|
|
nqaFTPStatsConnectSumTimeMax,
|
|
nqaFTPStatsErrors,
|
|
nqaFTPStatsTimeouts,
|
|
nqaFTPStatsProbeResponses,
|
|
nqaFTPStatsSendProbes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a probe failure is detected when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
probeFailure(0) subject to the value of
|
|
nqaAdminParaTrapProbeFailureFilter. The object
|
|
nqaAdminParaTrapProbeFailureFilter can be used to specify the
|
|
number of successive probe failures that are required
|
|
before this notification can be generated.(Only for FTP)"
|
|
::= { nqaNotifications 12 }
|
|
|
|
nqaFTPStatsTestFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaFTPStatsCtrlConnMaxTime,
|
|
nqaFTPStatsDataConnMaxTime,
|
|
nqaFTPStatsConnectSumTimeMax,
|
|
nqaFTPStatsErrors,
|
|
nqaFTPStatsTimeouts,
|
|
nqaFTPStatsProbeResponses,
|
|
nqaFTPStatsSendProbes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a FTP test is determined to have failed
|
|
when the corresponding nqaAdminParaTrapGeneration object is
|
|
set to testFailure(1). In this instance
|
|
nqaAdminParaTrapTestFailureFilter should specify the number of
|
|
probes in a test required to have failed in order to
|
|
consider the test as failed.(Only for FTP)"
|
|
::= { nqaNotifications 13 }
|
|
|
|
nqaFTPStatsTestCompleted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaScheduleOperStatus,
|
|
nqaFTPStatsCtrlConnMaxTime,
|
|
nqaFTPStatsDataConnMaxTime,
|
|
nqaFTPStatsConnectSumTimeMax,
|
|
nqaFTPStatsErrors,
|
|
nqaFTPStatsTimeouts,
|
|
nqaFTPStatsProbeResponses,
|
|
nqaFTPStatsSendProbes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated at the completion of a FTP test when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
testCompletion(2). (Only for FTP)"
|
|
::= { nqaNotifications 14 }
|
|
|
|
nqaFTPStatsThresholdNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminCtrlThreshold1,
|
|
nqaAdminCtrlThreshold2,
|
|
nqaFTPStatsCtrlConnMaxTime,
|
|
nqaFTPStatsDataConnMaxTime,
|
|
nqaFTPStatsRTDOverThresholds
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2,
|
|
the system sends trap information.(Only for FTP)"
|
|
::= { nqaNotifications 15 }
|
|
|
|
nqaJitterStatsRTDThresholdNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminCtrlThreshold1,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsRTDOverThresholds
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1,
|
|
the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing,vplspwping)"
|
|
::= { nqaNotifications 16 }
|
|
|
|
nqaJitterStatsOWDThresholdNotificationSD NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminCtrlThreshold2,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsOWDOverThresholdsSD
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlThreshold2
|
|
the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing)"
|
|
::= { nqaNotifications 17 }
|
|
nqaJitterStatsOWDThresholdNotificationDS NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminCtrlThreshold3,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsOWDOverThresholdsDS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlThreshold3
|
|
the system sends trap information. (Only for jitter,ICMPJitter,LSPJitter,GMACPing,MACPing)"
|
|
::= { nqaNotifications 18 }
|
|
|
|
nqaNegotiateFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminParaTargetPort,
|
|
nqaAdminParaVrfName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If negotiation between client and server failed,the system sends trap information."
|
|
::= { nqaNotifications 19 }
|
|
|
|
nqaRisingAlarmNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAlarmVariable,
|
|
nqaAlarmSampleType,
|
|
nqaAlarmValue,
|
|
nqaAlarmRisingThreshold,
|
|
nqaAlarmDescription
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sending trap messages when the value of the monitored object exceeds nqaAlarmUpperThreshold."
|
|
::= { nqaNotifications 20}
|
|
|
|
nqaFallingAlarmNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAlarmVariable,
|
|
nqaAlarmSampleType,
|
|
nqaAlarmValue,
|
|
nqaAlarmFallingThreshold,
|
|
nqaAlarmDescription
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sending trap messages when the value of the monitored object is under nqaAlarmLowerThreshold."
|
|
::= { nqaNotifications 21}
|
|
|
|
nqaFtpSaveRecordNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaFtpSaveRecordLastFileName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sending trap messages when saving a test result to the FTP server is completed."
|
|
::= { nqaNotifications 22 }
|
|
|
|
nqaPppoeStatsTestFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaPppoeStatsCompletions,
|
|
nqaPppoeStatsCurrentPhase,
|
|
nqaPppoeStatsErrorMessage,
|
|
nqaPppoeDiscoveryTimeout,
|
|
nqaPppoeLcpTimeout,
|
|
nqaPppoeAuthorizationTimeout,
|
|
nqaPppoeNcpTimeout,
|
|
nqaPppoeConnectionTime,
|
|
nqaPppoeClientSessionId,
|
|
nqaPppoeClientIpAddress,
|
|
nqaPppoeGatewayIpAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated when a PPPoE test is determined to have failed
|
|
when the corresponding nqaAdminParaTrapGeneration object is
|
|
set to testFailure(1). (Only for PPPoE))"
|
|
::= { nqaNotifications 23 }
|
|
|
|
nqaPppoeStatsTestCompleted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaPppoeStatsCompletions,
|
|
nqaPppoeStatsCurrentPhase,
|
|
nqaPppoeStatsErrorMessage,
|
|
nqaPppoeDiscoveryTimeout,
|
|
nqaPppoeLcpTimeout,
|
|
nqaPppoeAuthorizationTimeout,
|
|
nqaPppoeNcpTimeout,
|
|
nqaPppoeConnectionTime,
|
|
nqaPppoeClientSessionId,
|
|
nqaPppoeClientIpAddress,
|
|
nqaPppoeGatewayIpAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generated at the completion of a PPPoE test when the
|
|
corresponding nqaAdminParaTrapGeneration object is set to
|
|
testCompletion(2). (Only for PPPoE)"
|
|
::= { nqaNotifications 24 }
|
|
|
|
nqaJitterStatsJitterThresholdNotificationSD NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminCtrlJitterThresholdSD,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsJitterOverThresholdsSD
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlJitterThresholdSD
|
|
the system sends trap information. (Only for jitter)"
|
|
::= { nqaNotifications 25 }
|
|
|
|
nqaJitterStatsJitterThresholdNotificationDS NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaAdminParaTargetAddressType,
|
|
nqaAdminParaTargetAddress,
|
|
nqaAdminCtrlJitterThresholdDS,
|
|
nqaJitterStatsRTTMax,
|
|
nqaJitterStatsMaxDelaySD,
|
|
nqaJitterStatsMaxDelayDS,
|
|
nqaJitterStatsJitterOverThresholdsDS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the time of executing tests exceeds the nqaAdminCtrlJitterThresholdDS
|
|
the system sends trap information. (Only for jitter)"
|
|
::= { nqaNotifications 26 }
|
|
|
|
nqaReflectorStateChangeNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaReflectorID,
|
|
nqaReflectorState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the status of the reflector changes, the system sends trap information (only for the reflector)."
|
|
::= { nqaNotifications 27 }
|
|
|
|
nqaResultsTestResultChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaResultsCompletions,
|
|
nqaResultsCompletions
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the test result changes, the system sends trap information. "
|
|
::= { nqaNotifications 28 }
|
|
|
|
nqaResultsTestResultChangePackedNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaResultChangeRecord
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the test result changes, the system sends packed trap information. No more than two traps will
|
|
be sent in one second and each trap contains at most ten records."
|
|
::= { nqaNotifications 29 }
|
|
|
|
nqaResultsTestResultStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
nqaResultsTestType,
|
|
nqaResultsSourceIP,
|
|
nqaResultsSourceIfName,
|
|
nqaResultsDestinationIP,
|
|
nqaResultsLastCompletions,
|
|
nqaResultsCompletions,
|
|
nqaResultsChangeToFailureTimes,
|
|
nqaResultsChangeToSuccessTimes,
|
|
nqaResultsChangeToNoResultTimes,
|
|
nqaResultsChangeToNegotiationFailureTimes,
|
|
nqaResultsChangeToAbnormalTimes,
|
|
nqaResultsFailureTimes,
|
|
nqaResultsSuccessTimes,
|
|
nqaResultsNoResultTimes,
|
|
nqaResultsNegotiationFailureTimes,
|
|
nqaResultsAbnormalTimes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the test result changes, the system sends trap information. "
|
|
::= { nqaNotifications 30 }
|
|
|
|
nqaResultsDetail OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates detailed result information about the test instance."
|
|
::= { nqaResultsEntry 30 }
|
|
|
|
nqaConformance OBJECT IDENTIFIER ::= { nqa 7 }
|
|
|
|
nqaGroups OBJECT IDENTIFIER ::= { nqaConformance 1 }
|
|
|
|
nqaBaseGroup OBJECT-GROUP
|
|
OBJECTS { nqaVersion, nqaReset, nqaTimeOfLastSetError, nqaLastSetError, nqaEnable,
|
|
nqaNumOfCurrentCtrlEntry, nqaMaxConcurrentRequests, nqaMaxNumOfRequests, nqaJitterVersion,nqaSupportTestType,nqaSupportServerType}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 1 }
|
|
|
|
nqaAdminGroup OBJECT-GROUP
|
|
OBJECTS {nqaAdminCtrlTag, nqaAdminCtrlType, nqaAdminCtrlFrequency, nqaAdminCtrlTimeOut, nqaAdminCtrlThreshold1,
|
|
nqaAdminCtrlThreshold2,nqaAdminCtrlThreshold3,nqaAdminCtrlStatus, nqaAdminCtrlJitterThresholdSD, nqaAdminCtrlJitterThresholdDS, nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress,
|
|
nqaAdminParaTargetPort, nqaAdminParaSourceAddressType, nqaAdminParaSourceAddress, nqaAdminParaSourcePort, nqaAdminParaMaxTtl,
|
|
nqaAdminParaInitialTtl, nqaAdminParaStorageType, nqaAdminParaMaxFailures, nqaAdminParaDontFragment, nqaAdminParaDataSize,
|
|
nqaAdminParaDataFill, nqaAdminParaIfIndex, nqaAdminParaByPassRouteTable, nqaAdminParaMiscOptions, nqaAdminParaProbeCount,
|
|
nqaAdminParaTrapGeneration, nqaAdminParaTrapProbeFailureFilter, nqaAdminParaTrapTestFailureFilter, nqaAdminParaDSField, nqaAdminParaDnsServerAddressType,
|
|
nqaAdminParaDnsServerAddress, nqaAdminParaOperation, nqaAdminParaHttpVersion, nqaAdminParaHttpOperationString, nqaAdminParaTestFailurePercent,
|
|
nqaAdminParaFtpUserName, nqaAdminParaFtpPassword, nqaAdminParaFtpFilePath, nqaAdminParaFtpFileSize,nqaAdminParaInterval,
|
|
nqaAdminParaNumPackets, nqaAdminParaVrfName, nqaAdminParaLspAddressType, nqaAdminParaLspAddressMask, nqaAdminParaLspIpAddress,
|
|
nqaAdminParaLspPWE3VcId, nqaAdminParaLspPWE3Type, nqaAdminParaLspPWE3Option, nqaAdminParaLspPWE3RemoteVcId, nqaAdminParaLspPWE3RemoteAddress,
|
|
nqaAdminParaLspExp, nqaAdminParaLspReplyMode, nqaAdminParaResultRowMax, nqaAdminParaHistoryRowMax, nqaAdminParaCreateHopsEntries,
|
|
nqaAdminParaLspVCType, nqaAdminParaMTraceLastHopAddress,nqaAdminParaMTraceSourceAddress,nqaAdminParaMTraceGroupAddress,nqaAdminParaMTraceMaxTtl,
|
|
nqaAdminParaMTraceSendMode,nqaAdminParaMTraceResponseTtl,nqaAdminParaMTraceResponseAddressType,nqaAdminParaMTraceResponseAddress, nqaAdminParaDistanceNodeType,
|
|
nqaAdminParaMacAddress, nqaAdminParaRMepID, nqaAdminParaMDName, nqaAdminParaMAName, nqaAdminParaMacTunnelName,
|
|
nqaAdminParaCodecType, nqaAdminParaIcpifAdvFactor, nqaAdminParaFtpMode, nqaAdminParaNextHopAddressType, nqaAdminParaNextHopAddress,nqaAdminParaForwardingSimulationInboundIfIndex,
|
|
nqaAdminParaMeasure, nqaAdminParaEthPriority, nqaAdminParaMinRate, nqaAdminParaMaxRate, nqaAdminParaCevid, nqaAdminParaPevid,nqaAdminParaPrecision,nqaAdminParaSnmpCommunityRead,
|
|
nqaAdminParaDatasizeList, nqaAdminParaFailRatioPrecision,nqaAdminParaFailRatioValue,nqaAdminGeneralflowTestBehavior,nqaAdminParaFrameRate,nqaAdminGeneralflowDiscardNonTestPriority,
|
|
nqaAdminParaSourceMacAddress, nqaAdminParaCeEthType, nqaAdminParaPeEthType, nqaAdminParaDirection, nqaAdminParaLspVpnFrrPathType, nqaAdminParaSoftwareBased, nqaAdminParaLspPathType,
|
|
nqaAdminParaPathType,nqaAdminParaEthPriorityStatus,
|
|
nqaScheduleStartType, nqaScheduleStartTime, nqaScheduleEndType, nqaScheduleEndTime,nqaScheduleAgeTime,
|
|
nqaScheduleNumOfInitiations, nqaAdminParaIcmpJitterMode, nqaAdminParaPathMtuDiscoveryPathMtuMax, nqaAdminParaPathMtuStep, nqaScheduleOperStatus,
|
|
nqaScheduleElapsedTime,nqaScheduleLastFinishIndex,nqaScheduleLastCollectIndex,nqaGroupStatusType,nqaGroupPeriod,
|
|
nqaGroupLeaderOwnerIndex,nqaGroupLeaderTestName,nqaGroupMemberNum,nqaGroupMemberFree,nqaAdminParaHardwareBased,nqaAdminParaPppoeUserName,
|
|
nqaAdminParaPppoePassword,nqaAdminParaPppoeVlanIf,nqaAdminParaPppoeAuthenticationMode,nqaAdminParaPppoeRedialUpTimes,nqaAdminParaPppoeInterval,nqaAdminParaVsiName,
|
|
nqaAdminParaVlanId,nqaAdminParaLspTunnelType,nqaAdminParaLspNextHopAddress,nqaAdminParaLspVersion,nqaAdminParaRemoteAddressType,nqaAdminParaRemoteAddress,nqaAdminParaTimeUnit,nqaAdminParaFragment,nqaAdminParaRmoteFecType,nqaAdminParaRmoteFecMask,nqaAdminParaRmoteFecIpAddress,
|
|
nqaAdminParaSrPolicyName,nqaAdminParaSrPolicyEndPointAddrType ,nqaAdminParaSrPolicyEndPointIpAddress,nqaAdminParaSrPolicyEndPointColor,nqaAdminParaSrPolicyBindingSid,nqaAdminParaDscp,nqaAdminParaFlexAlgoId,
|
|
nqaAdminExtPara1,nqaAdminExtPara2,nqaAdminExtPara3,nqaAdminExtPara4,nqaAdminExtPara5,nqaAdminExtPara6,nqaAdminExtPara7,nqaAdminExtPara8,nqaAdminExtPara9,nqaAdminExtPara10,
|
|
nqaAdminExtPara11,nqaAdminExtPara12,nqaAdminExtPara13,nqaAdminExtPara14,nqaAdminExtPara15,nqaAdminExtPara16,nqaAdminExtPara17,nqaAdminExtPara18,nqaAdminExtPara19,nqaAdminExtPara20,
|
|
nqaAdminExtPara21,nqaAdminExtPara22,nqaAdminExtPara23,nqaAdminExtPara24,nqaAdminExtPara25,nqaAdminExtPara26,nqaAdminExtPara27,nqaAdminExtPara28,nqaAdminExtPara29,nqaAdminExtPara30,
|
|
nqaAdminExtPara31,nqaAdminExtPara32,nqaAdminExtPara33,nqaAdminExtPara34,nqaAdminExtPara35,nqaAdminExtPara36,nqaAdminExtPara37,nqaAdminExtPara38,nqaAdminExtPara39,nqaAdminExtPara40,
|
|
nqaAdminExtPara41,nqaAdminExtPara42,nqaAdminExtPara43,nqaAdminExtPara44,nqaAdminExtPara45,nqaAdminExtPara46,nqaAdminExtPara47,nqaAdminExtPara48,nqaAdminExtPara49,nqaAdminExtPara50
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 2 }
|
|
|
|
nqaServerGroup OBJECT-GROUP
|
|
OBJECTS { nqaTcpServerAddressType, nqaTcpServerStatus, nqaUdpServerAddressType, nqaUdpServerStatus, nqaIcmpServerAddressType, nqaIcmpServerStatus, nqaServerEnable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 3 }
|
|
|
|
nqaStatsGroup OBJECT-GROUP
|
|
OBJECTS { nqaResultsCompletions, nqaResultsTestAttempts, nqaResultsCurHopCount, nqaResultsCurProbeCount, nqaResultsRTDOverThresholds,
|
|
nqaResultsCompletionTimeMin, nqaResultsCompletionTimeMax, nqaResultsDisconnects, nqaResultsTimeouts, nqaResultsBusies,
|
|
nqaResultsNoConnections, nqaResultsSequenceErrors, nqaResultsDrops, nqaResultsAddressType, nqaResultsAddress,
|
|
nqaResultsProbeResponses, nqaResultsSentProbes, nqaResultsLastGoodProbe, nqaResultsLastGoodPath, nqaResultsTestFinished,
|
|
nqaHTTPStatsCompletions, nqaHTTPStatsRTDOverThresholds, nqaHTTPStatsRTTSum, nqaHTTPStatsRTTMin, nqaHTTPStatsRTTMax,
|
|
nqaHTTPStatsDNSRTTSum, nqaHTTPStatsDNSRTTMin, nqaHTTPStatsDNSRTTMax, nqaHTTPStatsTCPConnectRTTSum, nqaHTTPStatsTCPConnectRTTMin,
|
|
nqaHTTPStatsTCPConnectRTTMax, nqaHTTPStatsTransactionRTTSum, nqaHTTPStatsTransactionRTTMin, nqaHTTPStatsTransactionRTTMax, nqaHTTPStatsMessageBodyOctetsSum,
|
|
nqaHTTPStatsDNSServerTimeouts, nqaHTTPStatsTCPConnectTimeouts, nqaHTTPStatsTransactionTimeouts, nqaHTTPStatsDNSQueryErrors, nqaHTTPStatsErrors,
|
|
nqaHTTPStatsTcpConnErrors, nqaHTTPStatsProbeResponses, nqaHTTPStatsSendProbes, nqaHTTPStatsBusies, nqaHTTPStatsTestFinished,
|
|
nqaJitterStatsCompletions, nqaJitterStatsRTDOverThresholds, nqaJitterStatsNumOfRTT, nqaJitterStatsRTTSum, nqaJitterStatsRTTSum2Low,
|
|
nqaJitterStatsRTTSum2High, nqaJitterStatsRTTMin, nqaJitterStatsRTTMax, nqaJitterStatsMinOfPositivesSD, nqaJitterStatsMaxOfPositivesSD,
|
|
nqaJitterStatsNumOfPositivesSD, nqaJitterStatsSumOfPositivesSD, nqaJitterStatsSum2OfPositivesSDLow, nqaJitterStatsSum2OfPositivesSDHigh, nqaJitterStatsMinOfNegativesSD,
|
|
nqaJitterStatsMaxOfNegativesSD, nqaJitterStatsNumOfNegativesSD, nqaJitterStatsSumOfNegativesSD, nqaJitterStatsSum2OfNegativesSDLow, nqaJitterStatsSum2OfNegativesSDHigh,
|
|
nqaJitterStatsMinOfPositivesDS, nqaJitterStatsMaxOfPositivesDS, nqaJitterStatsNumOfPositivesDS, nqaJitterStatsSumOfPositivesDS, nqaJitterStatsSum2OfPositivesDSLow,
|
|
nqaJitterStatsSum2OfPositivesDSHigh, nqaJitterStatsMinOfNegativesDS, nqaJitterStatsMaxOfNegativesDS, nqaJitterStatsNumOfNegativesDS, nqaJitterStatsSumOfNegativesDS,
|
|
nqaJitterStatsSum2OfNegativesDSLow, nqaJitterStatsSum2OfNegativesDSHigh, nqaJitterStatsPacketLossSD, nqaJitterStatsPacketLossDS, nqaJitterStatsPacketOutOfSequences,
|
|
nqaJitterStatsErrors, nqaJitterStatsBusies, nqaJitterStatsTimeouts, nqaJitterStatsProbeResponses, nqaJitterStatsSentProbes,
|
|
nqaJitterStatsDrops, nqaJitterStatsTestFinished, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsRTTAvg,
|
|
nqaJitterStatsPacketLossRatio, nqaJitterStatsAvgJitter, nqaJitterStatsAvgJitterSD, nqaJitterStatsAvgJitterDS, nqaJitterStatsJitterOut,
|
|
nqaJitterStatsJitterIn, nqaJitterStatsOWDOverThresholdsSD, nqaJitterStatsOWDOverThresholdsDS, nqaJitterStatsPktLossUnknown, nqaJitterStatsNumOfOWD,
|
|
nqaJitterStatsOWSumSD, nqaPathJitterStatsCompletions, nqaPathJitterStatsAddressType, nqaPathJitterStatsAddress, nqaPathJitterStatsRtdOverThresholds, nqaPathJitterStatsNumOfRtt, nqaPathJitterStatsRttSum,
|
|
nqaJitterStatsOperOfIcpif, nqaJitterStatsOperOfMos, nqaJitterStatsMinDelaySD, nqaJitterStatsSum2DelaySDLow,
|
|
nqaJitterStatsSum2DelaySDHigh, nqaJitterStatsMinDelayDS, nqaJitterStatsSum2DelayDSLow, nqaJitterStatsSum2DelayDSHigh,nqaJitterStatsTimeUnit,nqaJitterStatsAvgDelaySD,nqaJitterStatsAvgDelayDS,
|
|
nqaJitterStatsPktRewriteNum, nqaJitterStatsPktRewriteRatio, nqaJitterStatsPktDisorderNum, nqaJitterStatsPktDisorderRatio, nqaJitterStatsFragPktDisorderNum, nqaJitterStatsFragPktDisorderRatio,
|
|
nqaJitterStatsJitterOverThresholdsSD, nqaJitterStatsJitterOverThresholdsDS, nqaJitterStatsOverallOverThresholds, nqaJitterStatsStartTime, nqaJitterStatsEndTime, nqaJitterStatsResultDetail,
|
|
nqaPathJitterStatsRttSum2Low, nqaPathJitterStatsRttSum2High, nqaPathJitterStatsRttMin, nqaPathJitterStatsRttMax, nqaPathJitterStatsMinOfPositivesSD,
|
|
nqaPathJitterStatsMaxOfPositivesSD, nqaPathJitterStatsNumOfPositivesSD, nqaPathJitterStatsSumOfPositivesSD, nqaPathJitterStatsSum2OfPositivesSDLow, nqaPathJitterStatsSum2OfPositivesSDHigh,
|
|
nqaPathJitterStatsMinOfNegativesSD, nqaPathJitterStatsMaxOfNegativesSD, nqaPathJitterStatsNumOfNegativesSD, nqaPathJitterStatsSumOfNegativesSD, nqaPathJitterStatsSum2OfNegativesSDLow,
|
|
nqaPathJitterStatsSum2OfNegativesSDHigh, nqaPathJitterStatsMinOfPositivesDS, nqaPathJitterStatsMaxOfPositivesDS, nqaPathJitterStatsNumOfPositivesDS, nqaPathJitterStatsSumOfPositivesDS,
|
|
nqaPathJitterStatsSum2OfPositivesDSLow, nqaPathJitterStatsSum2OfPositivesDSHigh, nqaPathJitterStatsMinOfNegativesDS, nqaPathJitterStatsMaxOfNegativesDS, nqaPathJitterStatsNumOfNegativesDS,
|
|
nqaPathJitterStatsSumOfNegativesDS, nqaPathJitterStatsSum2OfNegativesDSLow, nqaPathJitterStatsSum2OfNegativesDSHigh, nqaPathJitterStatsPacketLossSD, nqaPathJitterStatsPacketLossDS,
|
|
nqaPathJitterStatsPacketOutOfSequences, nqaPathJitterStatsErrors, nqaPathJitterStatsBusies, nqaPathJitterStatsTimeouts, nqaPathJitterStatsProbeResponses,
|
|
nqaPathJitterStatsSentProbes, nqaPathJitterStatsDrops, nqaPathJitterStatsTestFinished, nqaPathJitterStatsMaxDelaySD, nqaPathJitterStatsMaxDelayDS,
|
|
nqaPathJitterStatsRttAvg, nqaPathJitterStatsPacketLossRatio, nqaPathJitterStatsAvgJitter, nqaPathJitterStatsAvgJitterSD, nqaPathJitterStatsAvgJitterDS,
|
|
nqaPathJitterStatsJitterOut, nqaPathJitterStatsJitterIn, nqaPathJitterStatsOwdOverThresholdsSD, nqaPathJitterStatsPktLossUnknown, nqaPathJitterStatsNumOfOwd,
|
|
nqaPathJitterStatsOwdSumSD, nqaPathJitterStatsOwdSumDS, nqaPathJitterStatsOwdOverThresholdsDS, nqaPathMtuStatsAddressType, nqaPathMtuStatsAddress,
|
|
nqaPathMtuStatsCompletions, nqaPathMtuStatsSentProbes, nqaPathMtuStatsDiscoveryPathMtuMin, nqaPathMtuStatsDiscoveryPathMtuMax, nqaPathMtuStatsOptimumFirstStep,
|
|
nqaPathMtuStatsBusies, nqaPathMtuStatsTimeouts, nqaPathMtuStatsDrops, nqaPathMtuStatsProbeResponses, nqaPathMtuStatsPathMtu,
|
|
nqaPathMtuStatsTestFinished, nqaJitterStatsOWSumDS, nqaResultsSumCompletionTime, nqaResultsSumCompletionTime2Low, nqaResultsSumCompletionTime2High,
|
|
nqaFTPStatsCompletions, nqaFTPStatsRTDOverThresholds, nqaFTPStatsCtrlConnMaxTime, nqaFTPStatsCtrlConnMinTime, nqaFTPStatsCtrlConnAveTime,
|
|
nqaFTPStatsDataConnMaxTime, nqaFTPStatsDataConnMinTime, nqaFTPStatsDataConnAveTime, nqaFTPStatsConnectSumTimeMax, nqaFTPStatsConnectSumTimeMin,
|
|
nqaFTPStatsConnectSumTimeAve, nqaFTPStatsMessageBodyOctetsSum, nqaFTPStatsErrors, nqaFTPStatsTimeouts, nqaFTPStatsDiscontinued,
|
|
nqaFTPStatsProbeResponses, nqaFTPStatsSendProbes, nqaFTPStatsTestFinished, nqaMpingStatsTargetAddressType, nqaMpingStatsTargetAddress,
|
|
nqaMpingStatsReceiverAddress, nqaMpingStatsCompletions, nqaMpingStatsRTDOverThresholds, nqaMpingStatsSumCompletionTime, nqaMpingStatsSumCompletionTime2Low,
|
|
nqaMpingStatsSumCompletionTime2High, nqaMpingStatsCompletionTimeMin, nqaMpingStatsCompletionTimeMax, nqaMpingStatsTimeouts, nqaMpingStatsBusies,
|
|
nqaMpingStatsSequenceErrors, nqaMpingStatsDrops, nqaMpingStatsProbeResponses, nqaMpingStatsSentProbes, nqaMpingStatsLastGoodProbe,
|
|
nqaMpingStatsTestFinished, nqaMpingStatsReceiverCount, nqaMpingStatsLastFibHit, nqaMpingStatsRttAvg, nqaMpingStatsLostPacketRatio, nqaMtracertStatsAddressType, nqaMtracertStatsAddress, nqaMtracertStatsCompletions, nqaMtracertStatsCurHopCount,
|
|
nqaMtracertStatsCurProbeCount, nqaMtracertStatsRTDOverThresholds, nqaMtracertStatsTimeouts, nqaMtracertStatsBusies, nqaMtracertStatsSequenceErrors,
|
|
nqaMtracertStatsDrops, nqaMtracertStatsProbeResponses, nqaMtracertStatsSentProbes, nqaMtracertStatsLastGoodProbe, nqaMtracertStatsLastGoodPath,
|
|
nqaMtracertStatsTestFinished, nqaMtracertStatsCurPathTTL, nqaMtracertStatsMaxPathTTL, nqaMtracertStatsInPkgLossRate, nqaMtracertStatsSGPkgLossRate,
|
|
nqaMtracertStatsInPkgRate, nqaMtracertStatsOutPkgRate, nqaMtracertStatsTimeDelay,nqaResultsRttAvg,nqaResultsLostPacketRatio,nqaResultsRingResponseNode,nqaResultChangeRecord,nqaResultsDetail, nqaHTTPStatsRttAvg,nqaHTTPStatsLostPacketRatio,nqaFTPStatsRttAvg,nqaFTPStatsLostPacketRatio,
|
|
nqaPppoeStatsCompletions, nqaPppoeStatsCurrentPhase, nqaPppoeStatsErrorMessage, nqaPppoeDiscoveryTimeout, nqaPppoeLcpTimeout, nqaPppoeAuthorizationTimeout, nqaPppoeNcpTimeout, nqaPppoeConnectionTime, nqaPppoeClientSessionId,
|
|
nqaPppoeClientIpAddress, nqaPppoeGatewayIpAddress, nqaRtptestStatsCompletions, nqaRtptestStatsIpTargetAddressType, nqaRtptestStatsIpTargetAddress, nqaRtptestStatsSourceAddressType, nqaRtptestStatsIpSourceAddress, nqaRtptestStatsMinRtt,
|
|
nqaRtptestStatsMaxRtt, nqaRtptestStatsAverageRtt, nqaRtptestStatsProbeResponses, nqaRtptestStatsSentProbes, nqaRtptestStatsMaxJitter, nqaRtptestStatsMinJitter, nqaRtptestStatsAvgJitter,nqaRtptestStatsLostPacketRatio,nqaRtptestStatsSumRtt,nqaRtptestStatsMinDelaySD,nqaRtptestStatsMaxDelaySD,nqaRtptestStatsAvgDelaySD,nqaRtptestStatsMinJitterSD,nqaRtptestStatsMaxJitterSD,nqaRtptestStatsAvgJitterSD,nqaRtptestStatsLossRateSD,nqaRtptestStatsIPDVSD,
|
|
nqaRtplistenStatsCompletions, nqaRtplistenStatsIpTargetAddressType, nqaRtplistenStatsIpTargetAddress, nqaRtplistenStatsIpTargetPort, nqaRtplistenStatsSourceAddressType,
|
|
nqaRtplistenStatsIpSourceAddress, nqaRtplistenStatsIpSourcePort, nqaRtplistenStatsDSField, nqaRtplistenStatsMaxJitter, nqaRtplistenStatsMinJitter, nqaRtplistenStatsAvgJitter, nqaRtplistenStatsLostPacketRatio, nqaRtplistenStatsMaxLostPacketNumber,
|
|
nqaGeneralflowStatsCompletions, nqaGeneralflowStatsResultDetail, nqaGeneralflowStatsTxRate, nqaGeneralflowStatsRxRate, nqaGeneralflowStatsMinRtt, nqaGeneralflowStatsMaxRtt, nqaGeneralflowStatsAverageRtt, nqaGeneralflowStatsMaxJitter, nqaGeneralflowStatsMinJitter, nqaGeneralflowStatsAvgJitter,
|
|
nqaGeneralflowStatsTxCountLow, nqaGeneralflowStatsTxCountHigh, nqaGeneralflowStatsRxCountLow, nqaGeneralflowStatsRxCountHigh, nqaGeneralflowStatsFrameLossRate, nqaGeneralflowStatsPrecision, nqaGeneralflowStatsThroughput, nqaGeneralflowStatsDataSize,nqaGeneralflowStatsTestStatus,
|
|
nqaGeneralflowStatsFrameLossRatePrecision,nqaGeneralflowStatsFrameLossRatePrecisionValue,nqaGeneralflowStatsStartTime,nqaGeneralflowStatsEndTime,nqaGeneralflowStatsTestTotalTime,nqaGeneralflowStatsTestRemainingTime,nqaGeneralflowStatsTestTime,nqaGeneralflowStatsEstimatedTestTime,
|
|
nqaGeneralflowStatsRealTestTime,nqaGeneralflowStatsFrameRate,nqaGeneralflowStatsCurrentRateCount, nqaGeneralflowCurrentStatsThroughput, nqaGeneralflowCurrentStatsFrameLossRate, nqaEthernetServiceStatsTestProcess, nqaEthernetServiceStatsTestStatus,
|
|
nqaEthernetServiceStatsTestFlowNum, nqaEthernetServiceStatsTestMode, nqaEthernetServiceStatsTestBeginTime, nqaEthernetServiceStatsTestEndTime, nqaEthernetServiceStatsTestTotalTime, nqaEthernetServiceStatsTestRealTime, nqaEthernetServiceStatsResultDetail, nqaEthernetServiceStatsTestPhase,
|
|
nqaEthernetServiceStatsFlowBeginTime, nqaEthernetServiceStatsFlowEndTime, nqaEthernetServiceStatsDisorderPacketsNum, nqaEthernetServiceStatsFlowResult, nqaEthernetServiceStatsFlowMinIR, nqaEthernetServiceStatsFlowMaxIR, nqaEthernetServiceStatsFlowMeanIR, nqaEthernetServiceStatsFlowMinFTD,
|
|
nqaEthernetServiceStatsFlowMaxFTD, nqaEthernetServiceStatsFlowMeanFTD, nqaEthernetServiceStatsFlowMinFDV, nqaEthernetServiceStatsFlowMaxFDV, nqaEthernetServiceStatsFlowMeanFDV, nqaEthernetServiceStatsFlowFlCount, nqaEthernetServiceStatsFlowFLRPrecision, nqaEthernetServiceStatsFlowFLR,
|
|
nqaEthernetServiceStatsFlowUnavailCount, nqaEthernetServiceStatsFlowAvailPrecision, nqaEthernetServiceStatsFlowAVAIL, nqaMultiPathResultsCompletions, nqaMultiPathResultsTestAttempts, nqaMultiPathResultsCurHopCount, nqaMultiPathResultsCurProbeCount, nqaMultiPathResultsRTDOverThresholds,
|
|
nqaMultiPathResultsSumCompletionTime, nqaMultiPathResultsSumCompletionTime2Low, nqaMultiPathResultsSumCompletionTime2High, nqaMultiPathResultsCompletionTimeMin,nqaMultiPathResultsCompletionTimeMax, nqaMultiPathResultsDisconnects, nqaMultiPathResultsTimeouts, nqaMultiPathResultsBusies,
|
|
nqaMultiPathResultsNoConnections, nqaMultiPathResultsSequenceErrors, nqaMultiPathResultsDrops, nqaMultiPathResultsAddressType, nqaMultiPathResultsAddress, nqaMultiPathResultsProbeResponses, nqaMultiPathResultsSentProbes, nqaMultiPathResultsLastGoodProbe, nqaMultiPathResultsLastGoodPath,
|
|
nqaMultiPathResultsTestFinished, nqaMultiPathResultsRttAvg, nqaMultiPathResultsLostPacketRatio, nqaMultiPathResultsSrPolicyPreference, nqaMultiPathResultsSrPolicyPathType, nqaMultiPathResultsSrPolicyProtocol, nqaMultiPathResultsSrPolicyNodeAddress, nqaMultiPathResultsSrPolicyDiscriminator,
|
|
nqaMultiPathResultsSrPolicySegListId, nqaMultiPathResultsSrPolicyXcIndex, nqaResultsChangeToFailureTimes, nqaResultsChangeToSuccessTimes, nqaResultsChangeToNoResultTimes, nqaResultsChangeToNegotiationFailureTimes, nqaResultsChangeToAbnormalTimes, nqaResultsFailureTimes, nqaResultsSuccessTimes, nqaResultsNoResultTimes, nqaResultsNegotiationFailureTimes, nqaResultsAbnormalTimes, nqaResultsLastCompletions,nqaResultsTestType,nqaResultsSourceIP,nqaResultsSourceIfName,nqaResultsDestinationIP
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 4 }
|
|
|
|
nqaHistoryGroup OBJECT-GROUP
|
|
OBJECTS { nqaHistoryTimeStamp, nqaHistoryAddressType, nqaHistoryAddress, nqaHistoryCompletionTime, nqaHistoryFinishState,
|
|
nqaHistoryLastRC, nqaMpingHistoryAddressType, nqaMpingHistoryAddress, nqaMpingHistoryReceiverAddress, nqaMpingHistoryTimeStamp,
|
|
nqaMpingHistoryCompletionTime, nqaMpingHistoryFinishState, nqaMpingHistoryLastRC, nqaMpingHistoryFibHit, nqaMtracertHistoryAddressType,
|
|
nqaMtracertHistoryAddress, nqaMtracertHistoryTimeStamp, nqaMtracertHistoryCompletionTime, nqaMtracertHistoryLastRC, nqaMtracertHistoryCurQueryMode,
|
|
nqaMtracertHistoryQueryArrivalTime, nqaMtracertHistoryIncomingIfAddress, nqaMtracertHistoryOutgoingIfAddress, nqaMtracertHistoryPreHopRouterAddress, nqaMtracertHistoryInputPacketCount,
|
|
nqaMtracertHistoryOutputPacketCount, nqaMtracertHistoryTotalSGPacketCount, nqaMtracertHistoryRtgProtocol, nqaMtracertHistoryFwdTTL, nqaMtracertHistoryFwdCode,
|
|
nqaMtracertHistroyFinishState, nqaVplsMacTracertHistoryTimeStamp, nqaVplsMacTracertHistoryAddressType, nqaVplsMacTracertHistoryAddress, nqaVplsMacTracertHistoryCompletionTime,
|
|
nqaVplsMacTracertHistoryFinishState, nqaVplsMacTracertHistoryHitFlag, nqaVplsMacTracertHistoryDSCount, nqaVplsMacTracertHistorySuccessPathNode, nqaVplsMacTracertHistoryDSAddress,
|
|
nqaVplsMTraceHistoryResponserAddressType, nqaVplsMTraceHistoryResponserAddress, nqaVplsMTraceHistoryUpStreamAddressType, nqaVplsMTraceHistoryUpStreamAddress, nqaVplsMTraceHistoryReceivedTtl,
|
|
nqaVplsMTraceHistoryIGMPVersion, nqaVplsMTraceHistoryIGMPSnpgEnable, nqaVplsMTraceHistoryIGMPProxyEnable, nqaVplsMTraceHistoryIGMPRouterPortLearningEnable, nqaVplsMTraceHistoryRequireRouterAlertEnable,
|
|
nqaVplsMTraceHistoryForwardMode, nqaVplsMTraceHistoryHitFlag, nqaVplsMTraceHistoryPWExist, nqaVplsMTraceHistoryGroupPolicy, nqaVplsMTraceHistoryRcvQueryCount,
|
|
nqaVplsMTraceHistoryRcvReportCount, nqaVplsMTraceHistoryRcvLeaveCount, nqaVplsMTraceHistoryTimeStamp, nqaVplsMTraceHistoryCompletionTime, nqaVplsMTraceHistoryLastRC,
|
|
nqaVplsMTraceHistoryLastRSC, nqaVplsMTraceHistoryFinishState, nqaVplsMTraceHistorySuccessPathNode,nqaMacTraceHistoryTTL,nqaMacTraceHistorySeqNumber,nqaMacTraceHistoryForwarded,nqaMacTraceHistoryCompletionTime,
|
|
nqaMacTraceHistoryTerminalMep,nqaMacTraceHistoryRelayAction,nqaMacTraceHistoryIngressAction,nqaMacTraceHistoryIngressMac,nqaMacTraceHistoryIngressIfName,nqaMacTraceHistoryEgressAction,
|
|
nqaMacTraceHistoryEgressMac,nqaMacTraceHistoryEgressIfName,nqaMultiPathHistoryTimeStamp,nqaMultiPathHistoryAddressType,nqaMultiPathHistoryAddress,nqaMultiPathHistoryCompletionTime,
|
|
nqaMultiPathHistoryFinishState,nqaMultiPathHistoryLastRC
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 5 }
|
|
|
|
nqaNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
nqaResultsProbeFailed,
|
|
nqaResultsTestFailed,
|
|
nqaResultsTestCompleted,
|
|
nqaResultsThresholdNotification,
|
|
nqaHTTPStatsProbeFailed,
|
|
nqaHTTPStatsTestFailed,
|
|
nqaHTTPStatsTestCompleted,
|
|
nqaHTTPStatsThresholdNotification,
|
|
nqaJitterStatsProbeFailed,
|
|
nqaJitterStatsTestFailed,
|
|
nqaJitterStatsTestCompleted,
|
|
nqaFTPStatsProbeFailed,
|
|
nqaFTPStatsTestFailed,
|
|
nqaFTPStatsTestCompleted,
|
|
nqaFTPStatsThresholdNotification,
|
|
nqaJitterStatsRTDThresholdNotification,
|
|
nqaJitterStatsOWDThresholdNotificationSD,
|
|
nqaJitterStatsOWDThresholdNotificationDS,
|
|
nqaNegotiateFailed ,
|
|
nqaRisingAlarmNotification,
|
|
nqaFallingAlarmNotification,
|
|
nqaFtpSaveRecordNotification,
|
|
nqaPppoeStatsTestFailed,
|
|
nqaPppoeStatsTestCompleted,
|
|
nqaJitterStatsJitterThresholdNotificationSD,
|
|
nqaJitterStatsJitterThresholdNotificationDS,
|
|
nqaReflectorStateChangeNotification,
|
|
nqaResultsTestResultChange,
|
|
nqaResultsTestResultChangePackedNotification,
|
|
nqaResultsTestResultStatusChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notification which are required to be supported by
|
|
implementations of this MIB."
|
|
::= { nqaGroups 6 }
|
|
nqaCollectStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nqaJitterCollectStatsCompletions,nqaJitterCollectStatsRTDOverThresholds,nqaJitterCollectStatsOWDOverThresholdsSD,nqaJitterCollectStatsOWDOverThresholdsDS,nqaJitterCollectStatsNumOfRTT,nqaJitterCollectStatsRTTSum,
|
|
nqaJitterCollectStatsRTTSum2Low,nqaJitterCollectStatsRTTSum2High,nqaJitterCollectStatsRTTMin,nqaJitterCollectStatsRTTMax,nqaJitterCollectStatsMinOfPositivesSD,nqaJitterCollectStatsMaxOfPositivesSD,
|
|
nqaJitterCollectStatsNumOfPositivesSD,nqaJitterCollectStatsSumOfPositivesSD,nqaJitterCollectStatsSum2OfPositivesSDLow,nqaJitterCollectStatsSum2OfPositivesSDHigh,nqaJitterCollectStatsMinOfNegativesSD,
|
|
nqaJitterCollectStatsMaxOfNegativesSD,nqaJitterCollectStatsNumOfNegativesSD,nqaJitterCollectStatsSumOfNegativesSD,nqaJitterCollectStatsSum2OfNegativesSDLow,nqaJitterCollectStatsSum2OfNegativesSDHigh,
|
|
nqaJitterCollectStatsMinOfPositivesDS,nqaJitterCollectStatsMaxOfPositivesDS,nqaJitterCollectStatsNumOfPositivesDS,nqaJitterCollectStatsSumOfPositivesDS,nqaJitterCollectStatsSum2OfPositivesDSLow,
|
|
nqaJitterCollectStatsSum2OfPositivesDSHigh,nqaJitterCollectStatsMinOfNegativesDS,nqaJitterCollectStatsMaxOfNegativesDS,nqaJitterCollectStatsNumOfNegativesDS,nqaJitterCollectStatsSumOfNegativesDS,
|
|
nqaJitterCollectStatsSum2OfNegativesDSLow,nqaJitterCollectStatsSum2OfNegativesDSHigh,nqaJitterCollectStatsMaxDelaySD,nqaJitterCollectStatsMaxDelayDS,nqaJitterCollectStatsNumOfOWD,nqaJitterCollectStatsOWSumSD,
|
|
nqaJitterCollectStatsOWSumDS,nqaJitterCollectStatsPacketLossSD,nqaJitterCollectStatsPacketLossDS,nqaJitterCollectStatsPacketLossUnknown,nqaJitterCollectStatsPacketOutOfSequences,nqaJitterCollectStatsPacketLossRatio,
|
|
nqaJitterCollectStatsErrors,nqaJitterCollectStatsBusies,nqaJitterCollectStatsTimeouts,nqaJitterCollectStatsProbeResponses,nqaJitterCollectStatsSentProbes,nqaJitterCollectStatsDrops,nqaJitterCollectStatsRTTAvg,
|
|
nqaJitterCollectStatsAvgJitter,nqaJitterCollectStatsAvgJitterSD,nqaJitterCollectStatsAvgJitterDS,nqaJitterCollectStatsJitterOut,nqaJitterCollectStatsJitterIn,
|
|
nqaJitterCollectStatsMinDelaySD,nqaJitterCollectStatsMinDelayDS,nqaJitterCollectStatsAvgDelaySD,nqaJitterCollectStatsAvgDelayDS, nqaJitterCollectStatsPktRewriteNum, nqaJitterCollectStatsPktRewriteRatio,
|
|
nqaJitterCollectStatsPktDisorderNum, nqaJitterCollectStatsPktDisorderRatio, nqaJitterCollectStatsFragPktDisorderNum, nqaJitterCollectStatsFragPktDisorderRatio
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 7 }
|
|
|
|
nqaAlarmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nqaMaxAlarmNum,nqaMaxEventNum,nqaAlarmVariable,nqaAlarmSampleType,nqaAlarmValue,nqaAlarmStartUpNqaAlarm,nqaAlarmRisingThreshold,nqaAlarmDescription,
|
|
nqaAlarmFallingThreshold,nqaAlarmRisingEventIndex,nqaAlarmFallingEventIndex,nqaAlarmStatus,nqaEventDescription,nqaEventAdminName,nqaEventOperationTag,nqaEventType,nqaEventStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 8 }
|
|
|
|
nqaFtpSaveRecordGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nqaFtpSaveRecordEnable,nqaFtpSaveRecordIpAddr,nqaFtpSaveRecordVrfName,nqaFtpSaveRecordUserName,nqaFtpSaveRecordPassword,nqaFtpSaveRecordFileName,nqaFtpSaveRecordItemNum,nqaFtpSaveRecordTime,nqaFtpSaveRecordNotificationEnable,nqaFtpSaveRecordLastFileName}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 9 }
|
|
|
|
nqaReflectorGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nqaReflectorID,nqaReflectorIfIndex,nqaReflectorMacAddress, nqaReflectorIPAddressType,nqaReflectorIPAddress,nqaReflectorSimulationIPAddressType,nqaReflectorSimulationIPAddress,nqaReflectorPevid,nqaReflectorCevid,nqaReflectorAgeTime,nqaReflectorSourcePort,
|
|
nqaReflectorDestinationPort,nqaReflectorState,nqaReflectorSurvivalTime,nqaReflectorRecommendedTestMacAddress,nqaReflectorTestBehavior,nqaReflectorDiscardPriority,nqaReflectorDirection,nqaReflectorEndTime,nqaReflectorExchangePort,nqaReflectorTestFlowId,nqaReflectorRowStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 10 }
|
|
|
|
nqaTestFlowGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nqaTestFlowId,nqaTestFlowBeginDstMAC,nqaTestFlowEndDstMAC, nqaTestFlowBeginSrcMAC,nqaTestFlowEndSrcMAC,nqaTestFlowDstIPAddrType,nqaTestFlowBeginDstIP,nqaTestFlowEndDstIP,nqaTestFlowSrcIPAddrType,nqaTestFlowBeginSrcIP,nqaTestFlowEndSrcIP,
|
|
nqaTestFlowPevid,nqaTestFlowBeginCevid,nqaTestFlowEndCevid,nqaTestFlowBeginUdpDstPort,nqaTestFlowEndUdpDstPort,nqaTestFlowBeginUdpSrcPort,nqaTestFlowEndUdpSrcPort,nqaTestFlowCir,nqaTestFlowEir,nqaTestFlowFlr,nqaTestFlowFtd,nqaTestFlowFdv,
|
|
nqaTestFlowCirSimpleTest,nqaTestFlowTrafficPolicing,nqaTestFlowDescription,nqaTestFlowColorMode,nqaTestFlowPriorityType,nqaTestFlowGreenBeginValue,nqaTestFlowGreenEndValue,nqaTestFlowYellowBeginValue,nqaTestFlowYellowEndValue,
|
|
nqaTestFlowRowStatus,nqaTestFlowDstMacModifierType,nqaTestFlowDstMacModifierMask,nqaTestFlowDstMacModifierCount,nqaTestFlowDstMacModifierStep,nqaTestFlowSrcMacModifierType,nqaTestFlowSrcMacModifierMask,nqaTestFlowSrcMacModifierCount,
|
|
nqaTestFlowSrcMacModifierStep,nqaTestFlowDstIPModifierType,nqaTestFlowDstIPModifierMask,nqaTestFlowDstIPModifierCount,nqaTestFlowDstIPModifierStep,nqaTestFlowSrcIPModifierType,nqaTestFlowSrcIPModifierMask,nqaTestFlowSrcIPModifierCount,
|
|
nqaTestFlowSrcIPModifierStep}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { nqaGroups 11 }
|
|
|
|
|
|
nqaCompliances OBJECT IDENTIFIER ::= { nqaConformance 2 }
|
|
|
|
nqaCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { nqaBaseGroup, nqaAdminGroup, nqaStatsGroup,nqaAlarmGroup,nqaFtpSaveRecordGroup,nqaReflectorGroup}
|
|
::= { nqaCompliances 1 }
|
|
|
|
nqaCollectStats OBJECT IDENTIFIER ::= { nqa 8 }
|
|
nqaJitterCollectStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaJitterCollectStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the rolling accumulated history of the Jitter operation."
|
|
::= { nqaCollectStats 1 }
|
|
|
|
nqaJitterCollectStatsEntry OBJECT-TYPE
|
|
SYNTAX NqaJitterCollectStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table which contains the rolling accumulated history of the Jitter operation.
|
|
This entry is created only if the nqaAdminCtrlType is jitterAppl."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterCollectStatsIndex }
|
|
::= { nqaJitterCollectStatsTable 1 }
|
|
NqaJitterCollectStatsEntry ::=
|
|
SEQUENCE {
|
|
nqaJitterCollectStatsIndex
|
|
Integer32,
|
|
nqaJitterCollectStatsCompletions
|
|
Counter32,
|
|
nqaJitterCollectStatsRTDOverThresholds
|
|
Counter32,
|
|
nqaJitterCollectStatsOWDOverThresholdsSD
|
|
Counter32,
|
|
nqaJitterCollectStatsOWDOverThresholdsDS
|
|
Counter32,
|
|
nqaJitterCollectStatsNumOfRTT
|
|
Counter32,
|
|
nqaJitterCollectStatsRTTSum
|
|
Counter32,
|
|
nqaJitterCollectStatsRTTSum2Low
|
|
Counter32,
|
|
nqaJitterCollectStatsRTTSum2High
|
|
Counter32,
|
|
nqaJitterCollectStatsRTTMin
|
|
Gauge32,
|
|
nqaJitterCollectStatsRTTMax
|
|
Gauge32,
|
|
nqaJitterCollectStatsMinOfPositivesSD
|
|
Gauge32,
|
|
nqaJitterCollectStatsMaxOfPositivesSD
|
|
Gauge32,
|
|
nqaJitterCollectStatsNumOfPositivesSD
|
|
Counter32,
|
|
nqaJitterCollectStatsSumOfPositivesSD
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfPositivesSDLow
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfPositivesSDHigh
|
|
Counter32,
|
|
nqaJitterCollectStatsMinOfNegativesSD
|
|
Gauge32,
|
|
nqaJitterCollectStatsMaxOfNegativesSD
|
|
Gauge32,
|
|
nqaJitterCollectStatsNumOfNegativesSD
|
|
Counter32,
|
|
nqaJitterCollectStatsSumOfNegativesSD
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfNegativesSDLow
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfNegativesSDHigh
|
|
Counter32,
|
|
nqaJitterCollectStatsMinOfPositivesDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsMaxOfPositivesDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsNumOfPositivesDS
|
|
Counter32,
|
|
nqaJitterCollectStatsSumOfPositivesDS
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfPositivesDSLow
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfPositivesDSHigh
|
|
Counter32,
|
|
nqaJitterCollectStatsMinOfNegativesDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsMaxOfNegativesDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsNumOfNegativesDS
|
|
Counter32,
|
|
nqaJitterCollectStatsSumOfNegativesDS
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfNegativesDSLow
|
|
Counter32,
|
|
nqaJitterCollectStatsSum2OfNegativesDSHigh
|
|
Counter32,
|
|
nqaJitterCollectStatsMaxDelaySD
|
|
Gauge32,
|
|
nqaJitterCollectStatsMaxDelayDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsNumOfOWD
|
|
Counter32,
|
|
nqaJitterCollectStatsOWSumSD
|
|
Counter32,
|
|
nqaJitterCollectStatsOWSumDS
|
|
Counter32,
|
|
nqaJitterCollectStatsPacketLossSD
|
|
Counter32,
|
|
nqaJitterCollectStatsPacketLossDS
|
|
Counter32,
|
|
nqaJitterCollectStatsPacketLossUnknown
|
|
Counter32,
|
|
nqaJitterCollectStatsPacketOutOfSequences
|
|
Counter32,
|
|
nqaJitterCollectStatsPacketLossRatio
|
|
Gauge32,
|
|
nqaJitterCollectStatsErrors
|
|
Counter32,
|
|
nqaJitterCollectStatsBusies
|
|
Counter32,
|
|
nqaJitterCollectStatsTimeouts
|
|
Counter32,
|
|
nqaJitterCollectStatsProbeResponses
|
|
Counter32,
|
|
nqaJitterCollectStatsSentProbes
|
|
Counter32,
|
|
nqaJitterCollectStatsDrops
|
|
Counter32,
|
|
nqaJitterCollectStatsRTTAvg
|
|
Gauge32,
|
|
nqaJitterCollectStatsAvgJitter
|
|
Gauge32,
|
|
nqaJitterCollectStatsAvgJitterSD
|
|
Gauge32,
|
|
nqaJitterCollectStatsAvgJitterDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsJitterOut
|
|
OCTET STRING,
|
|
nqaJitterCollectStatsJitterIn
|
|
OCTET STRING,
|
|
nqaJitterCollectStatsMinDelaySD
|
|
Gauge32,
|
|
nqaJitterCollectStatsMinDelayDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsAvgDelaySD
|
|
Gauge32,
|
|
nqaJitterCollectStatsAvgDelayDS
|
|
Gauge32,
|
|
nqaJitterCollectStatsPktRewriteNum
|
|
Counter32,
|
|
nqaJitterCollectStatsPktRewriteRatio
|
|
Gauge32,
|
|
nqaJitterCollectStatsPktDisorderNum
|
|
Counter32,
|
|
nqaJitterCollectStatsPktDisorderRatio
|
|
Gauge32,
|
|
nqaJitterCollectStatsFragPktDisorderNum
|
|
Counter32,
|
|
nqaJitterCollectStatsFragPktDisorderRatio
|
|
Gauge32
|
|
}
|
|
nqaJitterCollectStatsIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..'7FFFFFFF'h)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third index of jitter collection statistics table."
|
|
::= { nqaJitterCollectStatsEntry 1 }
|
|
nqaJitterCollectStatsCompletions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the tests that have completed successfully."
|
|
::= { nqaJitterCollectStatsEntry 2 }
|
|
nqaJitterCollectStatsRTDOverThresholds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate RTD (Round Trip Delay) threshold."
|
|
::= { nqaJitterCollectStatsEntry 3 }
|
|
nqaJitterCollectStatsOWDOverThresholdsSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate OWD (One Way Delay) threshold from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 4 }
|
|
nqaJitterCollectStatsOWDOverThresholdsDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tests that violate OWD (One Way Delay) threshold from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 5 }
|
|
nqaJitterCollectStatsNumOfRTT OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RTTs that are successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 6 }
|
|
nqaJitterCollectStatsRTTSum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of RTTs that are successfully measured."
|
|
::= { nqaJitterCollectStatsEntry 7 }
|
|
nqaJitterCollectStatsRTTSum2Low OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of RTTs that are successfully measured by tests (low order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 8 }
|
|
nqaJitterCollectStatsRTTSum2High OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of RTTs that are successfully measured by tests (high order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 9 }
|
|
|
|
nqaJitterCollectStatsRTTMin OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 10 }
|
|
|
|
nqaJitterCollectStatsRTTMax OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 11 }
|
|
|
|
nqaJitterCollectStatsMinOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all positive jitter values from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 12 }
|
|
|
|
nqaJitterCollectStatsMaxOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all positive jitter values from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 13 }
|
|
|
|
nqaJitterCollectStatsNumOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all positive jitter values from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 14 }
|
|
|
|
nqaJitterCollectStatsSumOfPositivesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all positive jitter values from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 15 }
|
|
|
|
nqaJitterCollectStatsSum2OfPositivesSDLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter values
|
|
from source to destination (low order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 16 }
|
|
|
|
nqaJitterCollectStatsSum2OfPositivesSDHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter values
|
|
from source to destination (high order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 17 }
|
|
|
|
nqaJitterCollectStatsMinOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all negative jitter values from
|
|
source to destination."
|
|
::= { nqaJitterCollectStatsEntry 18 }
|
|
|
|
nqaJitterCollectStatsMaxOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all negative jitter values from
|
|
source to destination."
|
|
::= { nqaJitterCollectStatsEntry 19 }
|
|
|
|
nqaJitterCollectStatsNumOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all negative jitter values from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 20 }
|
|
|
|
nqaJitterCollectStatsSumOfNegativesSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all negative jitter values from source
|
|
to destination."
|
|
::= { nqaJitterCollectStatsEntry 21 }
|
|
|
|
nqaJitterCollectStatsSum2OfNegativesSDLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values from source
|
|
to destination (low order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 22 }
|
|
|
|
nqaJitterCollectStatsSum2OfNegativesSDHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values from source
|
|
to destination (high order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 23 }
|
|
|
|
nqaJitterCollectStatsMinOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all positive jitter values from
|
|
destination to source."
|
|
::= { nqaJitterCollectStatsEntry 24 }
|
|
|
|
nqaJitterCollectStatsMaxOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all positive jitter values from
|
|
destination to source."
|
|
::= { nqaJitterCollectStatsEntry 25 }
|
|
|
|
nqaJitterCollectStatsNumOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all positive jitter values from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 26 }
|
|
|
|
nqaJitterCollectStatsSumOfPositivesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all positive jitter values from
|
|
destination to source."
|
|
::= { nqaJitterCollectStatsEntry 27 }
|
|
|
|
nqaJitterCollectStatsSum2OfPositivesDSLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter
|
|
values from destination to source (low order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 28 }
|
|
|
|
nqaJitterCollectStatsSum2OfPositivesDSHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all positive jitter
|
|
values from destination to source (high order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 29 }
|
|
|
|
nqaJitterCollectStatsMinOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of absolute value of all negative jitter values
|
|
from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 30 }
|
|
|
|
nqaJitterCollectStatsMaxOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of absolute value of all negative jitter values
|
|
from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 31 }
|
|
|
|
nqaJitterCollectStatsNumOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all negative jitter values from destination
|
|
to source."
|
|
::= { nqaJitterCollectStatsEntry 32 }
|
|
|
|
nqaJitterCollectStatsSumOfNegativesDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of absolute value of all negative jitter values
|
|
from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 33 }
|
|
|
|
nqaJitterCollectStatsSum2OfNegativesDSLow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values
|
|
from destination to source (low order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 34 }
|
|
|
|
nqaJitterCollectStatsSum2OfNegativesDSHigh OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of squares of absolute value of all negative values
|
|
from destination to source (high order 32 bits)."
|
|
::= { nqaJitterCollectStatsEntry 35 }
|
|
|
|
nqaJitterCollectStatsMaxDelaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay) from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 36 }
|
|
|
|
nqaJitterCollectStatsMaxDelayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum of all OWD (One Way Delay) from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 37 }
|
|
|
|
nqaJitterCollectStatsNumOfOWD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of OWDs that were successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 38 }
|
|
|
|
nqaJitterCollectStatsOWSumSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of OWDs that were successfully measured by tests from
|
|
source to destination."
|
|
::= { nqaJitterCollectStatsEntry 39 }
|
|
|
|
nqaJitterCollectStatsOWSumDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sum of OWDs that were successfully measured by tests from
|
|
destination to source."
|
|
::= { nqaJitterCollectStatsEntry 40 }
|
|
|
|
nqaJitterCollectStatsPacketLossSD OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets lost when sent from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 41 }
|
|
|
|
nqaJitterCollectStatsPacketLossDS OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets lost when sent from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 42 }
|
|
|
|
nqaJitterCollectStatsPacketLossUnknown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets lost for which we cannot determine the direction."
|
|
::= { nqaJitterCollectStatsEntry 43 }
|
|
|
|
nqaJitterCollectStatsPacketOutOfSequences OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets arrived out of sequence."
|
|
::= { nqaJitterCollectStatsEntry 44 }
|
|
|
|
nqaJitterCollectStatsPacketLossRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of the packets lost to all packets sent in the test."
|
|
::= { nqaJitterCollectStatsEntry 45 }
|
|
|
|
nqaJitterCollectStatsErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of errors occurred in the test."
|
|
::= { nqaJitterCollectStatsEntry 46 }
|
|
|
|
nqaJitterCollectStatsBusies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of occasions when a test couldn't be initialized because
|
|
the previous test has not completed."
|
|
::= { nqaJitterCollectStatsEntry 47 }
|
|
|
|
nqaJitterCollectStatsTimeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of responses arrived over the time."
|
|
::= { nqaJitterCollectStatsEntry 48 }
|
|
|
|
nqaJitterCollectStatsProbeResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of responses from echo-server for the packets sent by the test."
|
|
::= { nqaJitterCollectStatsEntry 49 }
|
|
|
|
nqaJitterCollectStatsSentProbes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets sent in the test."
|
|
::= { nqaJitterCollectStatsEntry 50 }
|
|
|
|
nqaJitterCollectStatsDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that were sent failed in the test."
|
|
::= { nqaJitterCollectStatsEntry 51 }
|
|
|
|
nqaJitterCollectStatsRTTAvg OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of RTTs that were successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 52 }
|
|
|
|
nqaJitterCollectStatsAvgJitter OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values that were successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 53 }
|
|
|
|
nqaJitterCollectStatsAvgJitterSD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values from source to destination that were
|
|
successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 54 }
|
|
|
|
nqaJitterCollectStatsAvgJitterDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of jitter values from destination to source that were
|
|
successfully measured by tests."
|
|
::= { nqaJitterCollectStatsEntry 55 }
|
|
|
|
nqaJitterCollectStatsJitterOut OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Jitter (RFC1889) at responder."
|
|
::= { nqaJitterCollectStatsEntry 56 }
|
|
|
|
nqaJitterCollectStatsJitterIn OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Jitter (RFC1889) at sender."
|
|
::= { nqaJitterCollectStatsEntry 57 }
|
|
|
|
nqaJitterCollectStatsMinDelaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of all OWD (One Way Delay) from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 58 }
|
|
|
|
nqaJitterCollectStatsMinDelayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum of all OWD (One Way Delay) from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 59 }
|
|
|
|
nqaJitterCollectStatsAvgDelaySD OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of all OWD (One Way Delay) from source to destination."
|
|
::= { nqaJitterCollectStatsEntry 60 }
|
|
|
|
nqaJitterCollectStatsAvgDelayDS OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average of all OWD (One Way Delay) from destination to source."
|
|
::= { nqaJitterCollectStatsEntry 61 }
|
|
|
|
nqaJitterCollectStatsPktRewriteNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all the packets have been rewrited."
|
|
::= { nqaJitterCollectStatsEntry 62 }
|
|
|
|
nqaJitterCollectStatsPktRewriteRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of all the packets have been rewrited."
|
|
::= { nqaJitterCollectStatsEntry 63 }
|
|
|
|
nqaJitterCollectStatsPktDisorderNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all the packets have been disordered."
|
|
::= { nqaJitterCollectStatsEntry 64 }
|
|
|
|
nqaJitterCollectStatsPktDisorderRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of all the packets have been disordered."
|
|
::= { nqaJitterCollectStatsEntry 65 }
|
|
|
|
nqaJitterCollectStatsFragPktDisorderNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of all the packets whose fragments have been disordered."
|
|
::= { nqaJitterCollectStatsEntry 66 }
|
|
|
|
nqaJitterCollectStatsFragPktDisorderRatio OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio of all the packets whose fragments have been disordered."
|
|
::= { nqaJitterCollectStatsEntry 67 }
|
|
|
|
nqaAlarm OBJECT IDENTIFIER ::= { nqa 9 }
|
|
|
|
nqaMaxAlarmNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of alarms."
|
|
::= { nqaAlarm 1 }
|
|
|
|
nqaMaxEventNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of events that alarms can trigger."
|
|
::= { nqaAlarm 2}
|
|
|
|
nqaAlarmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of alarm entries."
|
|
::= { nqaAlarm 3 }
|
|
|
|
nqaAlarmEntry OBJECT-TYPE
|
|
SYNTAX NqaAlarmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of parameters that set up a periodic checking for alarm conditions."
|
|
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaAlarmIndex }
|
|
::= { nqaAlarmTable 1 }
|
|
|
|
|
|
NqaAlarmEntry ::=
|
|
SEQUENCE {
|
|
nqaAlarmIndex
|
|
Integer32,
|
|
nqaAlarmVariable
|
|
INTEGER,
|
|
nqaAlarmSampleType
|
|
INTEGER,
|
|
nqaAlarmValue
|
|
Integer32,
|
|
nqaAlarmStartUpNqaAlarm
|
|
INTEGER,
|
|
nqaAlarmRisingThreshold
|
|
Integer32,
|
|
nqaAlarmFallingThreshold
|
|
Integer32,
|
|
nqaAlarmRisingEventIndex
|
|
Integer32,
|
|
nqaAlarmFallingEventIndex
|
|
Integer32,
|
|
nqaAlarmDescription
|
|
OCTET STRING,
|
|
nqaAlarmStatus
|
|
RowStatus
|
|
}
|
|
|
|
nqaAlarmIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a row in the nqaAlarmTable."
|
|
::= { nqaAlarmEntry 1 }
|
|
|
|
nqaAlarmVariable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rttAvg(1),
|
|
lostPacketRatio(2),
|
|
packetLossSd(3),
|
|
packetLossDs(4),
|
|
jitterRavg(5),
|
|
jitterSdAvg(6),
|
|
jitterDsAvg(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the particular variable to be sampled."
|
|
::= { nqaAlarmEntry 11 }
|
|
|
|
|
|
nqaAlarmSampleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
delta(1),
|
|
absolute(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"delta(1): relative value
|
|
absolute(2): absolute value
|
|
Relative value: indicates the relative value to the last sampling.
|
|
Currently, only absolute(2) is supported."
|
|
::= { nqaAlarmEntry 12 }
|
|
|
|
nqaAlarmValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual value of the monitored object is compared with the upper limit and lower limit."
|
|
::= { nqaAlarmEntry 13 }
|
|
|
|
nqaAlarmStartUpNqaAlarm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
risingAlarm(1),
|
|
fallingAlarm(2),
|
|
risingOrFallingAlarm(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm that may be sent when this entry is first
|
|
set to valid. If the first sample after this entry
|
|
becomes valid is greater than or equal to the
|
|
risingThreshold and alarmStartupAlarm is equal to
|
|
risingAlarm(1) or risingOrFallingAlarm(3), then a single
|
|
rising alarm will be generated. If the first sample
|
|
after this entry becomes valid is less than or equal
|
|
to the fallingThreshold and alarmStartupAlarm is equal
|
|
to fallingAlarm(2) or risingOrFallingAlarm(3), then a
|
|
single falling alarm will be generated."
|
|
::= { nqaAlarmEntry 14 }
|
|
|
|
nqaAlarmRisingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the upper limit of the alarm."
|
|
::= { nqaAlarmEntry 15 }
|
|
|
|
nqaAlarmFallingThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the lower limit of the alarm."
|
|
::= { nqaAlarmEntry 16 }
|
|
|
|
nqaAlarmRisingEventIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the event triggered when the node value exceeds the upper limit."
|
|
::= { nqaAlarmEntry 17 }
|
|
|
|
nqaAlarmFallingEventIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the event triggered when the node value is under the lower limit."
|
|
::= { nqaAlarmEntry 18 }
|
|
|
|
nqaAlarmDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm Description."
|
|
::= { nqaAlarmEntry 19}
|
|
|
|
nqaAlarmStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the alarm row."
|
|
::= { nqaAlarmEntry 51 }
|
|
|
|
nqaEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of events to be generated."
|
|
::= { nqaAlarm 4 }
|
|
|
|
|
|
nqaEventEntry OBJECT-TYPE
|
|
SYNTAX NqaEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of parameters that describe an event to be generated when certain conditions are met. "
|
|
INDEX { nqaEventIndex }
|
|
::= { nqaEventTable 1 }
|
|
|
|
|
|
NqaEventEntry ::=
|
|
SEQUENCE {
|
|
nqaEventIndex
|
|
Integer32,
|
|
nqaEventType
|
|
INTEGER,
|
|
nqaEventDescription
|
|
OCTET STRING,
|
|
nqaEventAdminName
|
|
OCTET STRING,
|
|
nqaEventOperationTag
|
|
OCTET STRING,
|
|
nqaEventStatus
|
|
RowStatus
|
|
}
|
|
|
|
nqaEventIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a row in the nqaEventTable."
|
|
::= { nqaEventEntry 1 }
|
|
|
|
nqaEventType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
log(2),
|
|
trap(3),
|
|
logAndTrap(4),
|
|
linkage(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Event type, that is, behaviors for processing events:
|
|
none(1): no behavior
|
|
log(2): keeping logs
|
|
trap(3): sending trap messages
|
|
logandtrap(4): keeping logs and sending trap messages
|
|
linkage(5): start the linkaged test-instance."
|
|
::= { nqaEventEntry 11 }
|
|
|
|
nqaEventDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Event description."
|
|
::= { nqaEventEntry 12 }
|
|
|
|
nqaEventAdminName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administrator name of event test instance."
|
|
::= { nqaEventEntry 13 }
|
|
|
|
nqaEventOperationTag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation tag of event test instance."
|
|
::= { nqaEventEntry 14 }
|
|
|
|
nqaEventStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the event row."
|
|
::= { nqaEventEntry 51}
|
|
|
|
nqaSaveRecord OBJECT IDENTIFIER ::= { nqa 10}
|
|
|
|
nqaFtpSaveRecordEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies whether saving test results to the FTP server through FTP is enabled.
|
|
enable(1)
|
|
disable(2)
|
|
By default, the value is disable(2)."
|
|
::= { nqaSaveRecord 1}
|
|
|
|
nqaFtpSaveRecordIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the IP address of the FTP server to which test results are saved."
|
|
::= { nqaSaveRecord 2}
|
|
|
|
nqaFtpSaveRecordVrfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the name of the VRF instance for the FTP server to which test results are saved."
|
|
::= { nqaSaveRecord 3}
|
|
|
|
nqaFtpSaveRecordUserName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the user name of the FTP server to which test results are saved."
|
|
::= { nqaSaveRecord 4}
|
|
|
|
nqaFtpSaveRecordPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the password used when the test results are saved to the FTP server."
|
|
::= { nqaSaveRecord 5}
|
|
|
|
nqaFtpSaveRecordFileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..200))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the file name of used by the FTP server to save test results."
|
|
::= { nqaSaveRecord 6}
|
|
|
|
nqaFtpSaveRecordItemNum OBJECT-TYPE
|
|
SYNTAX Integer32 (10000..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the number of NQA test results that can be saved in a file created on the FTP server. The default value is 100000."
|
|
-- DEFVAL { 100000 }
|
|
::= { nqaSaveRecord 7}
|
|
|
|
nqaFtpSaveRecordTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..43200)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the duration that NQA test results can be saved in a file created on the FTP server. The default duration is 60 minutes."
|
|
-- DEFVAL { 60}
|
|
::= { nqaSaveRecord 8}
|
|
|
|
nqaFtpSaveRecordNotificationEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set whether to send trap messages when saving test results to the FTP server is completed.
|
|
By default, the value is disable(2)."
|
|
::= { nqaSaveRecord 9}
|
|
|
|
nqaFtpSaveRecordLastFileName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..220))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the name of the file used to save the last test record to the FTP server."
|
|
::= { nqaSaveRecord 10}
|
|
|
|
nqaReflector OBJECT IDENTIFIER ::= { nqa 11 }
|
|
|
|
nqaReflectorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaReflectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: nqaReflectorTable describes how to configure an NQA reflector.
|
|
Creation restrictions: None
|
|
Modification restrictions: This table is generated after a reflector is created. The entries in this table can be modified when nqaReflectorID is specified.
|
|
The reflector cannot be modified after being created.
|
|
Deletion restrictions: None
|
|
Access restrictions: None"
|
|
::= { nqaReflector 1 }
|
|
|
|
nqaReflectorEntry OBJECT-TYPE
|
|
SYNTAX NqaReflectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the nqaReflectorTable."
|
|
INDEX { nqaReflectorID }
|
|
::= { nqaReflectorTable 1 }
|
|
|
|
NqaReflectorEntry ::=
|
|
SEQUENCE {
|
|
nqaReflectorID
|
|
Integer32,
|
|
nqaReflectorIfIndex
|
|
Integer32,
|
|
nqaReflectorMacAddress
|
|
MacAddress,
|
|
nqaReflectorIPAddressType
|
|
InetAddressType,
|
|
nqaReflectorIPAddress
|
|
InetAddress,
|
|
nqaReflectorSimulationIPAddressType
|
|
InetAddressType,
|
|
nqaReflectorSimulationIPAddress
|
|
InetAddress,
|
|
nqaReflectorPevid
|
|
Integer32,
|
|
nqaReflectorCevid
|
|
Integer32,
|
|
nqaReflectorAgeTime
|
|
Integer32,
|
|
nqaReflectorSourcePort
|
|
Integer32,
|
|
nqaReflectorDestinationPort
|
|
Integer32,
|
|
nqaReflectorState
|
|
INTEGER,
|
|
nqaReflectorSurvivalTime
|
|
Integer32,
|
|
nqaReflectorRecommendedTestMacAddress
|
|
MacAddress,
|
|
nqaReflectorTestBehavior
|
|
Unsigned32,
|
|
nqaReflectorDiscardPriority
|
|
Unsigned32,
|
|
nqaReflectorDirection
|
|
Unsigned32,
|
|
nqaReflectorEndTime
|
|
Integer32,
|
|
nqaReflectorExchangePort
|
|
INTEGER,
|
|
nqaReflectorTestFlowId
|
|
OCTET STRING,
|
|
nqaReflectorRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
|
|
|
|
nqaReflectorID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the reflector ID, which is also the index of this table."
|
|
::= { nqaReflectorEntry 1 }
|
|
|
|
nqaReflectorIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the index of the reflector interface."
|
|
::= { nqaReflectorEntry 2 }
|
|
|
|
nqaReflectorMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MAC address."
|
|
::= { nqaReflectorEntry 3 }
|
|
|
|
nqaReflectorIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of an IP address."
|
|
DEFVAL { unknown }
|
|
::= { nqaReflectorEntry 4 }
|
|
|
|
nqaReflectorIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP address."
|
|
::= { nqaReflectorEntry 5 }
|
|
|
|
nqaReflectorSimulationIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of an simulated IP address."
|
|
DEFVAL { unknown }
|
|
::= { nqaReflectorEntry 6 }
|
|
|
|
nqaReflectorSimulationIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the simulated IP address."
|
|
::= { nqaReflectorEntry 7 }
|
|
|
|
|
|
nqaReflectorPevid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the PE VLAN ID."
|
|
::= { nqaReflectorEntry 8 }
|
|
|
|
nqaReflectorCevid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the CE VLAN ID."
|
|
::= { nqaReflectorEntry 9 }
|
|
|
|
nqaReflectorAgeTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the aging time, in seconds.
|
|
Setting the value to 0 indicates reserving the reflector eternally."
|
|
::= { nqaReflectorEntry 10 }
|
|
|
|
nqaReflectorSourcePort OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the UDP source port number. 0 means invalid UDP source port, it cannot be set but could be walked"
|
|
::= { nqaReflectorEntry 11 }
|
|
|
|
nqaReflectorDestinationPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the UDP destination port number. 0 means invalid UDP source port, it cannot be set but could be walked"
|
|
::= { nqaReflectorEntry 12 }
|
|
|
|
nqaReflectorState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
notinservice(2),
|
|
unknown(0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of the reflector.
|
|
1: active
|
|
2: not in service"
|
|
DEFVAL { active }
|
|
::= { nqaReflectorEntry 13 }
|
|
|
|
nqaReflectorSurvivalTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the survival time of the reflector, in seconds."
|
|
::= { nqaReflectorEntry 14 }
|
|
|
|
nqaReflectorRecommendedTestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the recommended test MAC address."
|
|
::= { nqaReflectorEntry 15 }
|
|
|
|
nqaReflectorTestBehavior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the action performed on the non-test frames by the reflector.
|
|
0: default value for 2544 reflector.
|
|
1: sharemode for 2544 reflector.
|
|
2: exclusive mode for Y.1564 reflector.
|
|
3: test flow mode for Y.1564 reflector."
|
|
DEFVAL { 0 }
|
|
::= { nqaReflectorEntry 16 }
|
|
|
|
nqaReflectorDiscardPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to configure the priority of Ethernet packets for reflector in the Ethernet service scenario.
|
|
The default is 4294967295."
|
|
::= { nqaReflectorEntry 17 }
|
|
|
|
nqaReflectorDirection OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the reflect direction.
|
|
1 indicates inbound. Reflect packets in manner of simulate product forwarding.
|
|
2 indicates outbound. Reflect packets in manner of output."
|
|
::= { nqaReflectorEntry 18 }
|
|
|
|
nqaReflectorEndTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end time of the reflector, in seconds."
|
|
::= { nqaReflectorEntry 19 }
|
|
|
|
nqaReflectorExchangePort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether exchange port.
|
|
0: disable
|
|
1: enable"
|
|
DEFVAL { disable }
|
|
::= { nqaReflectorEntry 20 }
|
|
|
|
nqaReflectorTestFlowId OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ID of test flow."
|
|
::= { nqaReflectorEntry 21 }
|
|
nqaReflectorRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of a row, which can be created or deleted but not modified.
|
|
The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'."
|
|
REFERENCE
|
|
"See definition of RowStatus in RFC 2579, 'Textual
|
|
Conventions for SMIv2.'"
|
|
::= { nqaReflectorEntry 50}
|
|
|
|
nqaTestFlow OBJECT IDENTIFIER ::= { nqa 12 }
|
|
|
|
nqaTestFlowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NqaTestFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of NQA testflow definitions."
|
|
::= { nqaTestFlow 1 }
|
|
|
|
nqaTestFlowEntry OBJECT-TYPE
|
|
SYNTAX NqaTestFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the nqaTestFlowTable."
|
|
INDEX { nqaTestFlowId }
|
|
::= { nqaTestFlowTable 1 }
|
|
|
|
NqaTestFlowEntry ::=
|
|
SEQUENCE {
|
|
nqaTestFlowId
|
|
Unsigned32,
|
|
nqaTestFlowBeginDstMAC
|
|
MacAddress,
|
|
nqaTestFlowEndDstMAC
|
|
MacAddress,
|
|
nqaTestFlowBeginSrcMAC
|
|
MacAddress,
|
|
nqaTestFlowEndSrcMAC
|
|
MacAddress,
|
|
nqaTestFlowDstIPAddrType
|
|
InetAddressType,
|
|
nqaTestFlowBeginDstIP
|
|
InetAddress,
|
|
nqaTestFlowEndDstIP
|
|
InetAddress,
|
|
nqaTestFlowSrcIPAddrType
|
|
InetAddressType,
|
|
nqaTestFlowBeginSrcIP
|
|
InetAddress,
|
|
nqaTestFlowEndSrcIP
|
|
InetAddress,
|
|
nqaTestFlowPevid
|
|
Unsigned32,
|
|
nqaTestFlowBeginCevid
|
|
Unsigned32,
|
|
nqaTestFlowEndCevid
|
|
Unsigned32,
|
|
nqaTestFlowBeginUdpDstPort
|
|
Unsigned32,
|
|
nqaTestFlowEndUdpDstPort
|
|
Unsigned32,
|
|
nqaTestFlowBeginUdpSrcPort
|
|
Unsigned32,
|
|
nqaTestFlowEndUdpSrcPort
|
|
Unsigned32,
|
|
nqaTestFlowCir
|
|
Unsigned32,
|
|
nqaTestFlowEir
|
|
Unsigned32,
|
|
nqaTestFlowFlr
|
|
Unsigned32,
|
|
nqaTestFlowFtd
|
|
Unsigned32,
|
|
nqaTestFlowFdv
|
|
Unsigned32,
|
|
nqaTestFlowCirSimpleTest
|
|
INTEGER,
|
|
nqaTestFlowTrafficPolicing
|
|
INTEGER,
|
|
nqaTestFlowDescription
|
|
OCTET STRING,
|
|
nqaTestFlowColorMode
|
|
INTEGER,
|
|
nqaTestFlowPriorityType
|
|
INTEGER,
|
|
nqaTestFlowGreenBeginValue
|
|
Unsigned32,
|
|
nqaTestFlowGreenEndValue
|
|
Unsigned32,
|
|
nqaTestFlowYellowBeginValue
|
|
Unsigned32,
|
|
nqaTestFlowYellowEndValue
|
|
Unsigned32,
|
|
nqaTestFlowRowStatus
|
|
RowStatus,
|
|
nqaTestFlowDstMacModifierType
|
|
INTEGER,
|
|
nqaTestFlowDstMacModifierMask
|
|
MacAddress,
|
|
nqaTestFlowDstMacModifierCount
|
|
Unsigned32,
|
|
nqaTestFlowDstMacModifierStep
|
|
Unsigned32,
|
|
nqaTestFlowSrcMacModifierType
|
|
INTEGER,
|
|
nqaTestFlowSrcMacModifierMask
|
|
MacAddress,
|
|
nqaTestFlowSrcMacModifierCount
|
|
Unsigned32,
|
|
nqaTestFlowSrcMacModifierStep
|
|
Unsigned32,
|
|
nqaTestFlowDstIPModifierType
|
|
INTEGER,
|
|
nqaTestFlowDstIPModifierMask
|
|
InetAddress,
|
|
nqaTestFlowDstIPModifierCount
|
|
Unsigned32,
|
|
nqaTestFlowDstIPModifierStep
|
|
Unsigned32,
|
|
nqaTestFlowSrcIPModifierType
|
|
INTEGER,
|
|
nqaTestFlowSrcIPModifierMask
|
|
InetAddress,
|
|
nqaTestFlowSrcIPModifierCount
|
|
Unsigned32,
|
|
nqaTestFlowSrcIPModifierStep
|
|
Unsigned32
|
|
}
|
|
|
|
nqaTestFlowId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the testflow ID, which is also the index of this table."
|
|
::= { nqaTestFlowEntry 1 }
|
|
|
|
nqaTestFlowBeginDstMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of destination MAC address."
|
|
::= { nqaTestFlowEntry 2 }
|
|
|
|
nqaTestFlowEndDstMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of destination MAC address."
|
|
::= { nqaTestFlowEntry 3 }
|
|
|
|
nqaTestFlowBeginSrcMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of source MAC address."
|
|
::= { nqaTestFlowEntry 4 }
|
|
|
|
nqaTestFlowEndSrcMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of source MAC address."
|
|
::= { nqaTestFlowEntry 5 }
|
|
|
|
nqaTestFlowDstIPAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of destination IP address."
|
|
DEFVAL { ipv4 }
|
|
::= { nqaTestFlowEntry 6 }
|
|
|
|
nqaTestFlowBeginDstIP OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of destination IP address."
|
|
::= { nqaTestFlowEntry 7 }
|
|
|
|
nqaTestFlowEndDstIP OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of destination IP address."
|
|
::= { nqaTestFlowEntry 8 }
|
|
|
|
nqaTestFlowSrcIPAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of source IP address."
|
|
DEFVAL { ipv4 }
|
|
::= { nqaTestFlowEntry 9 }
|
|
|
|
nqaTestFlowBeginSrcIP OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of source IP address."
|
|
::= { nqaTestFlowEntry 10 }
|
|
|
|
nqaTestFlowEndSrcIP OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of source IP address."
|
|
::= { nqaTestFlowEntry 11 }
|
|
|
|
nqaTestFlowPevid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the PE VLAN ID."
|
|
::= { nqaTestFlowEntry 12 }
|
|
|
|
nqaTestFlowBeginCevid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of CE VLAN ID."
|
|
::= { nqaTestFlowEntry 13 }
|
|
|
|
nqaTestFlowEndCevid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of CE VLAN ID."
|
|
::= { nqaTestFlowEntry 14 }
|
|
|
|
nqaTestFlowBeginUdpDstPort OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of UDP destination port.
|
|
The default value is 7."
|
|
::= { nqaTestFlowEntry 15 }
|
|
|
|
nqaTestFlowEndUdpDstPort OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of UDP destination port."
|
|
::= { nqaTestFlowEntry 16 }
|
|
|
|
nqaTestFlowBeginUdpSrcPort OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of UDP source port.
|
|
The default value is 49184."
|
|
::= { nqaTestFlowEntry 17 }
|
|
|
|
nqaTestFlowEndUdpSrcPort OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of UDP source port."
|
|
::= { nqaTestFlowEntry 18 }
|
|
|
|
nqaTestFlowCir OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates value of Committed Information Rate."
|
|
::= { nqaTestFlowEntry 19 }
|
|
|
|
nqaTestFlowEir OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates value of Excess Information Rate."
|
|
::= { nqaTestFlowEntry 20 }
|
|
|
|
nqaTestFlowFlr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates value of Frame Loss Rate."
|
|
::= { nqaTestFlowEntry 21 }
|
|
|
|
nqaTestFlowFtd OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates value of Frame Transfer Delay."
|
|
::= { nqaTestFlowEntry 22 }
|
|
|
|
nqaTestFlowFdv OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates value of Frame Delay Variation."
|
|
::= { nqaTestFlowEntry 23 }
|
|
|
|
nqaTestFlowCirSimpleTest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to 'enable (1)', cir simple test is enabled.The default is disable(0)."
|
|
DEFVAL { disable }
|
|
::= { nqaTestFlowEntry 24 }
|
|
|
|
nqaTestFlowTrafficPolicing OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to 'enable (1)', traffic policing is enabled.The default is disable(0)."
|
|
DEFVAL { disable }
|
|
::= { nqaTestFlowEntry 25 }
|
|
|
|
nqaTestFlowDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the description information for testflow."
|
|
::= { nqaTestFlowEntry 26 }
|
|
|
|
nqaTestFlowColorMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
colorblind(0),
|
|
colorware(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the color mode for testflow, the default value is colorblind(0)."
|
|
DEFVAL { colorblind }
|
|
::= { nqaTestFlowEntry 27 }
|
|
|
|
nqaTestFlowPriorityType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
eth8021p(1),
|
|
dscp(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the priority type of color mode."
|
|
::= { nqaTestFlowEntry 28 }
|
|
|
|
nqaTestFlowGreenBeginValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of priority value of Green."
|
|
::= { nqaTestFlowEntry 29 }
|
|
|
|
nqaTestFlowGreenEndValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of priority value of Green."
|
|
::= { nqaTestFlowEntry 30 }
|
|
|
|
nqaTestFlowYellowBeginValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the beginning of priority value of Yellow."
|
|
::= { nqaTestFlowEntry 31 }
|
|
|
|
nqaTestFlowYellowEndValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of priority value of Yellow."
|
|
::= { nqaTestFlowEntry 32 }
|
|
|
|
nqaTestFlowRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of a row, which can be created or deleted but not modified.
|
|
The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'."
|
|
::= { nqaTestFlowEntry 33}
|
|
nqaTestFlowDstMacModifierType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
singleORrange(0),
|
|
increment(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0).
|
|
An increment specifies the rules for mathematically creating a range of values."
|
|
::= { nqaTestFlowEntry 34 }
|
|
|
|
nqaTestFlowDstMacModifierMask OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0."
|
|
::= { nqaTestFlowEntry 35 }
|
|
|
|
nqaTestFlowDstMacModifierCount OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of MAC address modifier values. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 36 }
|
|
|
|
nqaTestFlowDstMacModifierStep OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates MAC address modifier step. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 37 }
|
|
|
|
nqaTestFlowSrcMacModifierType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
singleORrange(0),
|
|
increment(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0).
|
|
An increment specifies the rules for mathematically creating a range of values."
|
|
::= { nqaTestFlowEntry 38 }
|
|
|
|
nqaTestFlowSrcMacModifierMask OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0."
|
|
::= { nqaTestFlowEntry 39 }
|
|
|
|
nqaTestFlowSrcMacModifierCount OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of MAC address modifier values. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 40 }
|
|
|
|
nqaTestFlowSrcMacModifierStep OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates MAC address modifier step. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 41 }
|
|
|
|
nqaTestFlowDstIPModifierType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
singleORrange(0),
|
|
increment(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP address modifier type of a testflow. The default value is singleORrange(0).
|
|
An increment specifies the rules for mathematically creating a range of values."
|
|
::= { nqaTestFlowEntry 42 }
|
|
|
|
nqaTestFlowDstIPModifierMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address modifier bits of value that applied to add the step value. "
|
|
::= { nqaTestFlowEntry 43 }
|
|
|
|
nqaTestFlowDstIPModifierCount OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of IP address modifier values. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 44 }
|
|
|
|
nqaTestFlowDstIPModifierStep OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates IP address modifier step. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 45 }
|
|
|
|
nqaTestFlowSrcIPModifierType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
singleORrange(0),
|
|
increment(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP address modifier type of a testflow. The default value is singleORrange(0).
|
|
An increment specifies the rules for mathematically creating a range of values."
|
|
::= { nqaTestFlowEntry 46 }
|
|
|
|
nqaTestFlowSrcIPModifierMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address modifier bits of value that applied to add the step value. "
|
|
::= { nqaTestFlowEntry 47 }
|
|
|
|
nqaTestFlowSrcIPModifierCount OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of IP address modifier values. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 48 }
|
|
|
|
nqaTestFlowSrcIPModifierStep OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates IP address modifier step. The invalid value is 0."
|
|
::= { nqaTestFlowEntry 49 }
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- NQA-MIB.mib
|
|
--
|