Observium_CE/mibs/huawei/HUAWEI-WLAN-SECURITY-MIB

2276 lines
68 KiB
Plaintext

--
-- HUAWEI-WLAN-SECURITY-MIB.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 2.5 Build 225
-- Tuesday, February 19, 2013 at 16:43:20
--
-- ============================================================================
-- Copyright (C) 2014 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: The mib is used for configuring the information of the security, including
-- security profile and so on.
-- Reference:
-- Version: V1.02
--
-- ============================================================================
HUAWEI-WLAN-SECURITY-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwApRegionIndex, hwApIndex, hwApMac
FROM HUAWEI-WLAN-DEVICE-MIB
hwWlan
FROM HUAWEI-WLAN-MIB
hwRadioID
FROM HUAWEI-WLAN-RADIO-MIB
hwWlanServiceEssSsid, hwWlanServiceStaMac
FROM HUAWEI-WLAN-SERVICE-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, Counter32, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MacAddress, TruthValue, RowStatus, DisplayString
FROM SNMPv2-TC;
hwWlanSecurity MODULE-IDENTITY
LAST-UPDATED "201402131000Z" -- Feb 13, 2014 at 10:00 GMT
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"
huawei HUAWEI-WLAN-SECURITY-MIB.
"
REVISION "201402131000Z" -- Feb 13, 2014 at 10:00 GMT
DESCRIPTION
"Version: V1.02, add changes for V2R5"
REVISION "201308121000Z" -- Aug 12, 2013 at 10:00 GMT
DESCRIPTION
"Version: V1.01, add changes for V2R3"
REVISION "201006011000Z"
DESCRIPTION
" V1.00, The first Draft."
::= { hwWlan 6 }
--
-- Node definitions
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.6.139.6.1
-- 1.3.6.1.4.1.2011.6.139.6.1
hwWsecProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwWsecProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WLAN access security profile table."
::= { hwWlanSecurity 1 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1
-- 1.3.6.1.4.1.2011.6.139.6.1.1
hwWsecProfileEntry OBJECT-TYPE
SYNTAX HwWsecProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WLAN access security profile entry."
INDEX { hwWsecProfileName }
::= { hwWsecProfileTable 1 }
HwWsecProfileEntry ::=
SEQUENCE {
hwWsecProfileName
OCTET STRING,
hwWsecProfileWEPDataEncrypt
TruthValue,
hwWsecProfileWEPDefaultKeyID
Integer32,
hwWsecProfileWEPKeyMappingLength
Integer32,
hwWsecProfileAsuIpAddr
IpAddress,
hwWsecProfileCaCertFileName
OCTET STRING,
hwWsecProfileAsuCertFileName
OCTET STRING,
hwWsecProfileAcCertFileName
OCTET STRING,
hwWsecProfileAcPrvKeyFileName
OCTET STRING,
hwWsecProfileRsnaVersion
Integer32,
hwWsecProfileWapiVersion
Integer32,
hwWsecProfileRowStatus
RowStatus,
hwWsecProfileCaPfxPassword
OCTET STRING,
hwWsecProfileCaCertState
INTEGER,
hwWsecProfileAsuPfxPassword
OCTET STRING,
hwWsecProfileAsuCertState
INTEGER,
hwWsecProfileAcPfxPassword
OCTET STRING,
hwWsecProfileAcCertState
INTEGER,
hwWsecProfileKeyPfxPassword
OCTET STRING,
hwWsecProfileAsuType
INTEGER,
hwWsecProfileWpaPtkRekeySwitch
INTEGER,
hwWsecProfileWpa2PtkRekeySwitch
INTEGER,
hwWsecProfileWpaWpa2PtkRekeySwitch
INTEGER,
hwWsecProfileWpaPtkRekeyInterval
Integer32,
hwWsecProfileWpa2PtkRekeyInterval
Integer32,
hwWsecProfileWpaWpa2PtkRekeyInterval
Integer32
}
-- 1.3.6.1.4.1.2011.6.139.6.1.1.1
-- 1.3.6.1.4.1.2011.6.139.6.1.1.1
hwWsecProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
WLAN access security profile Name.
"
::= { hwWsecProfileEntry 1 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.2
-- 1.3.6.1.4.1.2011.6.139.6.1.1.2
hwWsecProfileWEPDataEncrypt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this attribute is TRUE, WEP data will be encrypted.
When this attribute is FALSE, WEP data will not be encrypted.
The default value of this attribute is FALSE."
::= { hwWsecProfileEntry 2 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.3
-- 1.3.6.1.4.1.2011.6.139.6.1.1.3
hwWsecProfileWEPDefaultKeyID OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall indicate the use of the first,
second, third, or fourth element of the WEPDefaultKeys
array when set to values of zero, one, two, or three. The
default value of this attribute shall be 0."
REFERENCE
"IEEE Std 802.11-2007, 8.3.2"
::= { hwWsecProfileEntry 3 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.4
-- 1.3.6.1.4.1.2011.6.139.6.1.1.4
hwWsecProfileWEPKeyMappingLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of tuples that hwWsecWEPKeyMappings can hold."
REFERENCE
"IEEE Std 802.11-2007, 8.3.2"
::= { hwWsecProfileEntry 4 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.5
-- 1.3.6.1.4.1.2011.6.139.6.1.1.5
hwWsecProfileAsuIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ASU IP address for WAPI certification authentication"
::= { hwWsecProfileEntry 5 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.6
-- 1.3.6.1.4.1.2011.6.139.6.1.1.6
hwWsecProfileCaCertFileName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CA certification file name"
::= { hwWsecProfileEntry 6 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.7
-- 1.3.6.1.4.1.2011.6.139.6.1.1.7
hwWsecProfileAsuCertFileName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ASU certification file name"
::= { hwWsecProfileEntry 7 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.8
-- 1.3.6.1.4.1.2011.6.139.6.1.1.8
hwWsecProfileAcCertFileName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AC certification file name"
::= { hwWsecProfileEntry 8 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.9
-- 1.3.6.1.4.1.2011.6.139.6.1.1.9
hwWsecProfileAcPrvKeyFileName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AC private key file name"
::= { hwWsecProfileEntry 9 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.10
-- 1.3.6.1.4.1.2011.6.139.6.1.1.10
hwWsecProfileRsnaVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest WAPI/RSNA version this entity supports. See 7.3.2.9."
::= { hwWsecProfileEntry 10 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.11
-- 1.3.6.1.4.1.2011.6.139.6.1.1.11
hwWsecProfileWapiVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the highest WAPI version that this entity supports."
::= { hwWsecProfileEntry 11 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.12
-- 1.3.6.1.4.1.2011.6.139.6.1.1.12
hwWsecProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status"
::= { hwWsecProfileEntry 12 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.13
hwWsecProfileCaPfxPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 13 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.14
hwWsecProfileCaCertState OBJECT-TYPE
SYNTAX INTEGER
{
valid(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 14 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.15
hwWsecProfileAsuPfxPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 15 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.16
hwWsecProfileAsuCertState OBJECT-TYPE
SYNTAX INTEGER
{
valid(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 16 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.17
hwWsecProfileAcPfxPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 17 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.18
hwWsecProfileAcCertState OBJECT-TYPE
SYNTAX INTEGER
{
valid(1),
invalid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 18 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.19
hwWsecProfileKeyPfxPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 19 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.20
hwWsecProfileAsuType OBJECT-TYPE
SYNTAX INTEGER
{
remote(1),
local(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 20 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.21
hwWsecProfileWpaPtkRekeySwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 21 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.22
hwWsecProfileWpa2PtkRekeySwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 22 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.23
hwWsecProfileWpaWpa2PtkRekeySwitch OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { hwWsecProfileEntry 23 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.24
hwWsecProfileWpaPtkRekeyInterval OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { 43200 }
::= { hwWsecProfileEntry 24 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.25
hwWsecProfileWpa2PtkRekeyInterval OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { 43200 }
::= { hwWsecProfileEntry 25 }
-- 1.3.6.1.4.1.2011.6.139.6.1.1.26
hwWsecProfileWpaWpa2PtkRekeyInterval OBJECT-TYPE
SYNTAX Integer32 (30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { 43200 }
::= { hwWsecProfileEntry 26 }
-- 1.3.6.1.4.1.2011.6.139.6.2
-- 1.3.6.1.4.1.2011.6.139.6.2
hwWsecWEPDefaultKeysTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwWsecWEPDefaultKeysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Conceptual table for WEP default keys. This table shall
contain the four WEP default secret key values
corresponding to the four possible KeyID values. The WEP
default secret keys are logically WRITE-ONLY. Attempts to
read the entries in this table shall return unsuccessful
status and values of null or zero. The default value of
each WEP default key shall be null."
REFERENCE
"IEEE Std 802.11-2007, 8.3.2"
::= { hwWlanSecurity 2 }
-- 1.3.6.1.4.1.2011.6.139.6.2.1
-- 1.3.6.1.4.1.2011.6.139.6.2.1
hwWsecWEPDefaultKeysEntry OBJECT-TYPE
SYNTAX HwWsecWEPDefaultKeysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry (conceptual row) in the WEP Default Keys Table."
INDEX { hwWsecProfileName, hwWsecWEPDefaultKeyIndex }
::= { hwWsecWEPDefaultKeysTable 1 }
HwWsecWEPDefaultKeysEntry ::=
SEQUENCE {
hwWsecWEPDefaultKeyIndex
Integer32,
hwWsecWEPDefaultKeyValue
OCTET STRING,
hwWsecWEPPassPhrase
DisplayString
}
-- 1.3.6.1.4.1.2011.6.139.6.2.1.1
-- 1.3.6.1.4.1.2011.6.139.6.2.1.1
hwWsecWEPDefaultKeyIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The auxiliary variable used to identify instances
of the columnar objects in the WEP Default Keys Table.
The value of this variable is equal to the WEPDefaultKeyID + 1"
::= { hwWsecWEPDefaultKeysEntry 1 }
-- 1.3.6.1.4.1.2011.6.139.6.2.1.2
-- 1.3.6.1.4.1.2011.6.139.6.2.1.2
hwWsecWEPDefaultKeyValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A WEP default secret hexadecimal key value.
10 byte for WEP-40, 26 byte for WEP-104, 32 byte for WEP-128.
Reading this variable shall return unsuccessful status or null or zero."
::= { hwWsecWEPDefaultKeysEntry 2 }
-- 1.3.6.1.4.1.2011.6.139.6.2.1.4
-- 1.3.6.1.4.1.2011.6.139.6.2.1.4
hwWsecWEPPassPhrase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A WEP default secret ASCII key value.
5 byte for WEP-40, 13 byte for WEP-104, 16 byte for WEP-128.
Reading this variable shall return unsuccessful status or null or zero."
::= { hwWsecWEPDefaultKeysEntry 4 }
-- 1.3.6.1.4.1.2011.6.139.6.3
-- 1.3.6.1.4.1.2011.6.139.6.3
hwWsecWEPKeyMappingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwWsecWEPKeyMappingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Conceptual table for WEP Key Mappings. The MIB supports
the ability to share a separate WEP key for each RA/TA
pair. The Key Mappings Table contains zero or one entry
for each MAC address and contains two fields for each
entry: WEPOn and the corresponding WEP key. The WEP key
mappings are logically WRITE-ONLY. Attempts to read the
entries in this table shall return unsuccessful status and
values of null or zero. The default value for all WEPOn
fields is FALSE."
REFERENCE
"IEEE Std 802.11-2007, 8.3.2"
::= { hwWlanSecurity 3 }
-- 1.3.6.1.4.1.2011.6.139.6.3.1
-- 1.3.6.1.4.1.2011.6.139.6.3.1
hwWsecWEPKeyMappingsEntry OBJECT-TYPE
SYNTAX HwWsecWEPKeyMappingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry (conceptual row) in the WEP Key Mappings Table."
INDEX { hwWsecProfileName, hwWsecWEPKeyMappingIndex }
::= { hwWsecWEPKeyMappingsTable 1 }
HwWsecWEPKeyMappingsEntry ::=
SEQUENCE {
hwWsecWEPKeyMappingIndex
Integer32,
hwWsecWEPKeyMappingAddress
MacAddress,
hwWsecWEPKeyMappingWEPOn
TruthValue,
hwWsecWEPKeyMappingValue
OCTET STRING,
hwWsecWEPKeyMappingStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.139.6.3.1.1
-- 1.3.6.1.4.1.2011.6.139.6.3.1.1
hwWsecWEPKeyMappingIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The auxiliary variable used to identify instances
of the columnar objects in the WEP Key Mappings Table."
::= { hwWsecWEPKeyMappingsEntry 1 }
-- 1.3.6.1.4.1.2011.6.139.6.3.1.2
-- 1.3.6.1.4.1.2011.6.139.6.3.1.2
hwWsecWEPKeyMappingAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address of the STA for which the values from this
key mapping entry are to be used."
::= { hwWsecWEPKeyMappingsEntry 2 }
-- 1.3.6.1.4.1.2011.6.139.6.3.1.3
-- 1.3.6.1.4.1.2011.6.139.6.3.1.3
hwWsecWEPKeyMappingWEPOn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Boolean as to whether WEP is to be used when communicating
with the hwWsecWEPKeyMappingAddress STA."
::= { hwWsecWEPKeyMappingsEntry 3 }
-- 1.3.6.1.4.1.2011.6.139.6.3.1.4
-- 1.3.6.1.4.1.2011.6.139.6.3.1.4
hwWsecWEPKeyMappingValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A WEP secret key value."
::= { hwWsecWEPKeyMappingsEntry 4 }
-- 1.3.6.1.4.1.2011.6.139.6.3.1.5
-- 1.3.6.1.4.1.2011.6.139.6.3.1.5
hwWsecWEPKeyMappingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating, modifying, and
deleting instances of the columnar objects in the WEP key
mapping Table."
DEFVAL { active }
::= { hwWsecWEPKeyMappingsEntry 5 }
-- 1.3.6.1.4.1.2011.6.139.6.4
-- 1.3.6.1.4.1.2011.6.139.6.4
hwWsecAuthSuitesTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwWsecAuthSuitesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the AKM suites supported by this entity. Each AKM
suite can be individually enabled and disabled. The AKM suite list
in the RSN information element is formed using the information in
this table."
::= { hwWlanSecurity 4 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1
-- 1.3.6.1.4.1.2011.6.139.6.4.1
hwWsecAuthSuitesEntry OBJECT-TYPE
SYNTAX HwWsecAuthSuitesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (row) in the hwWsecAuthSuitesTable."
INDEX { hwWsecProfileName, hwWsecAuthSuiteIndex }
::= { hwWsecAuthSuitesTable 1 }
HwWsecAuthSuitesEntry ::=
SEQUENCE {
hwWsecAuthSuiteIndex
INTEGER,
hwWsecAuthSuite
OCTET STRING,
hwWsecAuthSuiteEnabled
TruthValue,
hwWsecAuthPreauthenticationImplemented
TruthValue,
hwWsecAuthPreauthenticationEnabled
TruthValue,
hwWsecAuthUnicastKeysSupported
Integer32,
hwWsecAuthPairwiseCipher
INTEGER,
hwWsecAuthPairwiseCipherSize
Integer32,
hwWsecAuthUnicastRekeyMethod
INTEGER,
hwWsecAuthUnicastRekeyTime
Unsigned32,
hwWsecAuthUnicastRekeyPackets
Unsigned32,
hwWsecAuthMulticastCipher
INTEGER,
hwWsecAuthMulticastCipherSize
Integer32,
hwWsecAuthMulticastRekeyMethod
INTEGER,
hwWsecAuthMulticastRekeyTime
Unsigned32,
hwWsecAuthMulticastRekeyPackets
Unsigned32,
hwWsecAuthMulticastRekeyStrict
TruthValue,
hwWsecAuthPSKValue
OCTET STRING,
hwWsecAuthPSKPassPhrase
DisplayString,
hwWsecAuthCertificateUpdateCount
Unsigned32,
hwWsecAuthMulticastUpdateCount
Unsigned32,
hwWsecAuthUnicastUpdateCount
Unsigned32,
hwWsecAuthBKLifetime
Unsigned32,
hwWsecAuthBKReauthThreshold
Unsigned32,
hwWsecAuthSATimeout
Unsigned32,
hwWsecAuthExcludeUnencrypted
TruthValue,
hwWsecAuthDot1XMethod
Integer32,
hwWsecAuthControlledAuthControl
TruthValue,
hwWsecAuthControlledPortControl
Integer32,
hwWsecAuthOptionalImplemented
TruthValue
}
-- 1.3.6.1.4.1.2011.6.139.6.4.1.1
-- 1.3.6.1.4.1.2011.6.139.6.4.1.1
hwWsecAuthSuiteIndex OBJECT-TYPE
SYNTAX INTEGER
{
wapiCertification(1),
wapiPreShareKey(2),
wpa18021x(3),
wpa1PreShareKey(4),
wpa28021x(5),
wpa2PreShareKey(6),
shareKey(7),
openSystem(8),
wpa1wpa2PreShareKey(9),
wpa1wpa28021x(10)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The auxiliary variable used as an index into the
hwWsecAuthSuitesTable."
::= { hwWsecAuthSuitesEntry 1 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.2
-- 1.3.6.1.4.1.2011.6.139.6.4.1.2
hwWsecAuthSuite OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of an AKM suite. It consists of an OUI (the first 3
octets) and a cipher suite identifier (the last octet).
0x00147201 : WAPI certification authentication
0x00147202 : WAPI preShare key authentication
0x000FAC01 : WPA1(WPA version 1) 802.1X authentication
0x000FAC02 : WPA1(WPA version 1) preShare key authentication
0x00E0FC01 : WPA2(WPA version 2) 802.1X authentication
0x00E0FC02 : WPA2(WPA version 2) preShare key authentication
0x00E0FC03 : share key (for WEP)
0x00E0FC04 : open system (no authentication)
0x00E0FC05 : wpa-wpa2-preShareKey
0x00E0FC06 : wpa-wpa2-8021x
"
::= { hwWsecAuthSuitesEntry 2 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.3
-- 1.3.6.1.4.1.2011.6.139.6.4.1.3
hwWsecAuthSuiteEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the corresponding AKM suite is
enabled/disabled."
::= { hwWsecAuthSuitesEntry 3 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.4
-- 1.3.6.1.4.1.2011.6.139.6.4.1.4
hwWsecAuthPreauthenticationImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates whether the entity supports WAPI pre-authentication. This cannot
be TRUE unless hwWsecAuthOptionImplemented is TRUE."
::= { hwWsecAuthSuitesEntry 4 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.5
-- 1.3.6.1.4.1.2011.6.139.6.4.1.5
hwWsecAuthPreauthenticationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to TRUE, this shall indicate that WAPI pre-authentication is
enabled on this entity. This object requires that WAPI authentication of this profile Enabled."
::= { hwWsecAuthSuitesEntry 5 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.6
-- 1.3.6.1.4.1.2011.6.139.6.4.1.6
hwWsecAuthUnicastKeysSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of the unicast keys that a WAPI/RSNA of this entity supports."
::= { hwWsecAuthSuitesEntry 6 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.4.1.7
-- 1.3.6.1.4.1.2011.6.139.6.4.1.7
hwWsecAuthPairwiseCipher OBJECT-TYPE
SYNTAX INTEGER
{
wpiSms4(1),
wep40(2),
wep104(3),
tkip(4),
ccmp(5),
null(6),
tkipCcmp(7),
wep128(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The selector of a supported pairwise cipher. It consists of an OUI
(the first 3 octets) and a cipher suite identifier (the last octet).
0x00147201 : WPI-SMS4
0x000FAC00 : Use group cipher suite
0x000FAC01 : WEP-40
0x000FAC02 : TKIP
0x000FAC04 : CCMP-default in an RSNA
0x000FAC05 : WEP-104
0x000FAC06 : wep-128
0x000FAC07 : tkip-ccmp
0x00E0FC01 : null (no encryption), only for open system authentication
The cipher suite selector 00-0F-AC:4 (CCMP) shall be the default cipher suite value.
The cipher suite selectors 00-0F-AC:1 (WEP-40) and 00-0F-AC:5 (WEP-104) are only valid as a group
cipher suite in a transition security network (TSN) to allow pre-RSNA devices to join the BSS.
Use of CCMP as the group cipher suite with TKIP as the pairwise cipher suite shall not be supported.
NOTE?If the STAs can support CCMP, then there is no need for a weaker data confidentiality protocol.
The cipher suite selector 00-0F-AC:0 (Use group cipher suite) is only valid as the pairwise cipher suite. An
AP may specify the selector 00-0F-AC:0 (Use group cipher suite) for a pairwise cipher suite if it does not
cipher selection, this shall be the only pairwise cipher selection the AP advertises.
If CCMP is enabled, then the AP supports pairwise keys, and thus the suite selector 00-0F-AC:0 (Use group
cipher suite) shall not be a valid option.
"
::= { hwWsecAuthSuitesEntry 7 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.8
-- 1.3.6.1.4.1.2011.6.139.6.4.1.8
hwWsecAuthPairwiseCipherSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the length in bits of the pairwise cipher
key. This should be 256 for TKIP and 128 for CCMP."
::= { hwWsecAuthSuitesEntry 8 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.9
-- 1.3.6.1.4.1.2011.6.139.6.4.1.9
hwWsecAuthUnicastRekeyMethod OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
timeBased(2),
packetBased(3),
timepacketBased(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object selects a mechanism for rekeying the WAPI/RSNA USK. The default is time-based,
once per day. Rekeying the USK is only applicable to an entity acting in the AE or ASUE
role."
DEFVAL { timeBased }
::= { hwWsecAuthSuitesEntry 9 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.10
-- 1.3.6.1.4.1.2011.6.139.6.4.1.10
hwWsecAuthUnicastRekeyTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds after which the WAPI/RSNA USK shall be refreshed. The timer shall start
at the moment the USK was set using the MLME-SETWPIKEYS.request primitive."
DEFVAL { 86400 }
::= { hwWsecAuthSuitesEntry 10 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.11
-- 1.3.6.1.4.1.2011.6.139.6.4.1.11
hwWsecAuthUnicastRekeyPackets OBJECT-TYPE
SYNTAX Unsigned32
UNITS "1000 packets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A packet count (in 1000s of packets) after which the WAPI/RSNA USK shall be refreshed. The
packet counter shall start at the moment the USK was set using the
MLME-SETWPIKEYS.request primitive and it shall count all packets encrypted using
the current USK."
::= { hwWsecAuthSuitesEntry 11 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.4.1.12
-- 1.3.6.1.4.1.2011.6.139.6.4.1.12
hwWsecAuthMulticastCipher OBJECT-TYPE
SYNTAX INTEGER
{
wpiSms4(1),
wep40(2),
wep104(3),
tkip(4),
ccmp(5),
null(6),
tkipCcmp(7),
wep128(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the multicast cipher suite that this entity must adopt. The WAPI/RSNA
information element shall adopt the value of this variable, which contains a 3-octet OUI and
a one-octet cipher suite identifier.
0x00147201 : WPI-SMS4
0x000FAC01 : WEP-40
0x000FAC02 : TKIP
0x000FAC04 : CCMP-default in an RSNA
0x000FAC05 : WEP-104
0x000FAC06 : wep-128
0x000FAC07 : tkip-ccmp
0x00E0FC01 : null (no encryption), only for open system authentication
"
::= { hwWsecAuthSuitesEntry 12 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.13
-- 1.3.6.1.4.1.2011.6.139.6.4.1.13
hwWsecAuthMulticastCipherSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the length in bit of the multicast cipher key.
This should be 256 for in SMS4.
The former 128bits is the encryption key and the latter 128bits is the message
integrity check key.
This should be 256 for in TKIP.
The former 128bits is the encryption key and the latter 128bits is the message
integrity check key.
This should be 128 for in CCMP.
The 128bits is the encryption key and the message integrity check key.
This should be 40 for in WEP-40.
The 40bits is the encryption key.
This should be 40 for in WEP-104.
The 104bits is the encryption key.
This should be 40 for in WEP-128.
The 128bits is the encryption key.
"
::= { hwWsecAuthSuitesEntry 13 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.14
-- 1.3.6.1.4.1.2011.6.139.6.4.1.14
hwWsecAuthMulticastRekeyMethod OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
timeBased(2),
packetBased(3),
timepacketBased(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object selects a mechanism for rekeying the WAPI/RSNA MSK. The default is time-based,
once per day. Rekeying the MSK is only applicable to an entity acting in the
Authenticator role."
DEFVAL { timeBased }
::= { hwWsecAuthSuitesEntry 14 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.15
-- 1.3.6.1.4.1.2011.6.139.6.4.1.15
hwWsecAuthMulticastRekeyTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds after which the WAPI/RSNA MSK shall be refreshed. The timer shall start
at the moment the MSK was set using the MLME-SETWPIKEYS.request primitive."
DEFVAL { 86400 }
::= { hwWsecAuthSuitesEntry 15 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.16
-- 1.3.6.1.4.1.2011.6.139.6.4.1.16
hwWsecAuthMulticastRekeyPackets OBJECT-TYPE
SYNTAX Unsigned32
UNITS "1000 packets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A packet count (in 1000s of packets) after which the WAPI/RSNA MSK shall be refreshed. The
packet counter shall start at the moment the MSK was set using the
MLME-SETWPIKEYS.request primitive and it shall count all packets encrypted using
the current MSK."
::= { hwWsecAuthSuitesEntry 16 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.17
-- 1.3.6.1.4.1.2011.6.139.6.4.1.17
hwWsecAuthMulticastRekeyStrict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object signals that the MSK shall be refreshed whenever a STA leaves the BSS that
possesses the MSK."
::= { hwWsecAuthSuitesEntry 17 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.18
-- 1.3.6.1.4.1.2011.6.139.6.4.1.18
hwWsecAuthPSKValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PSK for when WAPI/RSNA in PSK mode is the selected AKM suite. In that case, the BK/PMK
will obtain its value from this object. This object is logically write-only. Reading this
variable shall return unsuccessful status or null or zero.
WAPI need 16 byte Hex, RSNA need 32 byte Hex. User should input Hex data for this node."
::= { hwWsecAuthSuitesEntry 18 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.19
-- 1.3.6.1.4.1.2011.6.139.6.4.1.19
hwWsecAuthPSKPassPhrase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PSK, for when WAPI/RSNA in PSK mode is the selected AKM suite, is configured by
hwWsecAuthPSKValue. An alternative manner of setting the PSK uses the
password-to-key algorithm. This variable provides a means to enter a pass-phrase. When
this object is written, the WAPI/RSNA entity shall use the password-to-key algorithm to derive a
pre-shared and populate hwWsecAuthPSKValue with this key. This object is
logically write-only. Reading this variable shall return unsuccessful status or null or zero."
::= { hwWsecAuthSuitesEntry 19 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.20
-- 1.3.6.1.4.1.2011.6.139.6.4.1.20
hwWsecAuthCertificateUpdateCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times messages in the WAPI Certificate Authentication Handshake
protocol will be retried per Certificate Authentication Handshake attempt."
DEFVAL { 3 }
::= { hwWsecAuthSuitesEntry 20 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.21
-- 1.3.6.1.4.1.2011.6.139.6.4.1.21
hwWsecAuthMulticastUpdateCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times Message 1 in the WAPI Multicast Key Announcement Handshake
will be retried per MSK Handshake attempt.
The number of times Message 1 in the RSNA Group Key Handshake will
be retried per GTK Handshake attempt.
"
DEFVAL { 3 }
::= { hwWsecAuthSuitesEntry 21 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.22
-- 1.3.6.1.4.1.2011.6.139.6.4.1.22
hwWsecAuthUnicastUpdateCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times Message 1 and Message 3 in the WAPI Unicast Key Negotiation
Handshake will be retried per USK Handshake attempt.
The number of times Message 1 and Message 3 in the RSNA 4-Way Handshake
will be retried per 4-Way Handshake attempt.
"
DEFVAL { 3 }
::= { hwWsecAuthSuitesEntry 22 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.23
-- 1.3.6.1.4.1.2011.6.139.6.4.1.23
hwWsecAuthBKLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum lifetime of a BK in the BK cache."
DEFVAL { 43200 }
::= { hwWsecAuthSuitesEntry 23 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.24
-- 1.3.6.1.4.1.2011.6.139.6.4.1.24
hwWsecAuthBKReauthThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percentage"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The percentage of the BK lifetime that should expire before a WAI/RSNA re-authentication
occurs."
DEFVAL { 70 }
::= { hwWsecAuthSuitesEntry 24 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.25
-- 1.3.6.1.4.1.2011.6.139.6.4.1.25
hwWsecAuthSATimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time a security association shall take to set up."
DEFVAL { 60 }
::= { hwWsecAuthSuitesEntry 25 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.26
-- 1.3.6.1.4.1.2011.6.139.6.4.1.26
hwWsecAuthExcludeUnencrypted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this attribute is TRUE, the STA shall not indicate at the MAC service
interface received MSDUs that have the Protected Frame subfield of
the Frame Control field equal to zero. When this attribute is FALSE,
the STA may accept MSDUs that have the Protected Frame subfield of
the Frame Control field equal to zero. The default value of this attribute
shall be FALSE."
::= { hwWsecAuthSuitesEntry 26 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.27
-- 1.3.6.1.4.1.2011.6.139.6.4.1.27
hwWsecAuthDot1XMethod OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Leaf don't sustain for V2R3 on 2012/11/26.
"
::= { hwWsecAuthSuitesEntry 27 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.28
-- 1.3.6.1.4.1.2011.6.139.6.4.1.28
hwWsecAuthControlledAuthControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates whether the entity enable the authentication. If the value is '0'
which means 'authentication disabled', the state of the controlled port shall be set to
'authenticated'; else the value is '1' which means 'authentication enabled', the state of the
controlled port shall be based on the hwWsecAuthControlledPortControl."
::= { hwWsecAuthSuitesEntry 28 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.29
-- 1.3.6.1.4.1.2011.6.139.6.4.1.29
hwWsecAuthControlledPortControl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute, when the hwWsecAuthControlledAuthControl is set to true, shall be
effective and indicate the methods by which the port is controlled. If the value is '0' which
means 'auto', the state of the controlled port shall be based on the result of the
authentication; else the value is '1' which means 'force unauthenticated', the state of the
controlled port shall be unconditionally set to 'unauthenticated'."
::= { hwWsecAuthSuitesEntry 29 }
-- 1.3.6.1.4.1.2011.6.139.6.4.1.30
-- 1.3.6.1.4.1.2011.6.139.6.4.1.30
hwWsecAuthOptionalImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute, when true, shall indicate that the WAPI, WPA, RSNA option is implemented; else, this
attribute shall be false."
::= { hwWsecAuthSuitesEntry 30 }
-- 1.3.6.1.4.1.2011.6.139.6.5
-- 1.3.6.1.4.1.2011.6.139.6.5
hwWsecStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwWsecStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains per-STA statistics in an RSN. The entry with
hwWsecStatsSTAAddress set to FF-FF-FF-FF-FF-FF shall contain
statistics for broadcast/multicast traffic."
::= { hwWlanSecurity 5 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1
-- 1.3.6.1.4.1.2011.6.139.6.5.1
hwWsecStatsEntry OBJECT-TYPE
SYNTAX HwWsecStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hwWsecStatsTable."
INDEX { hwWsecStatsSTAAddress }
::= { hwWsecStatsTable 1 }
HwWsecStatsEntry ::=
SEQUENCE {
hwWsecStatsSTAAddress
MacAddress,
hwWsecStatsVersion
Integer32,
hwWsecStatsBKIDUsed
OCTET STRING,
hwWsecStatsAuthenticationSuiteSelected
INTEGER,
hwWsecStatsUnicastCipherSelected
INTEGER,
hwWsecStatsMulticastCipherSelected
INTEGER,
hwWsecStatsAuthenticationSuiteRequested
INTEGER,
hwWsecStatsUnicastCipherRequested
INTEGER,
hwWsecStatsMulticastCipherRequested
INTEGER,
hwWsecStatsWEPICVErrorCount
Counter32,
hwWsecStatsWEPExcludedCount
Counter32,
hwWsecStatsWEPUndecryptableCount
Counter32,
hwWsecStatsTKIPICVErrors
Counter32,
hwWsecStatsTKIPLocalMICFailures
Counter32,
hwWsecStatsTKIPRemoteMICFailures
Counter32,
hwWsecStatsTKIPReplays
Counter32,
hwWsecStatsCCMPReplays
Counter32,
hwWsecStatsCCMPDecryptErrors
Counter32,
hwWsecStatsWAISignatureErrors
Counter32,
hwWsecStatsWAIHMACErrors
Counter32,
hwWsecStatsWAIAuthenticationResultFailures
Counter32,
hwWsecStatsWAIDiscardCounters
Counter32,
hwWsecStatsWAITimeoutCounters
Counter32,
hwWsecStatsWAIFormatErrors
Counter32,
hwWsecStatsWAICertificateHandshakeFailures
Counter32,
hwWsecStatsWAIUnicastHandshakeFailures
Counter32,
hwWsecStatsWAIMulticastHandshakeFailures
Counter32,
hwWsecStatsWPIReplayCounter
Counter32,
hwWsecStatsWPIDecryptableErrors
Counter32,
hwWsecStatsWPIMICErrors
Counter32,
hwWsecStatsControlledPortStatus
TruthValue,
hwWsecStatsNumberOfPTKSAReplayCounters
Integer32,
hwWsecStatsNumberOfGTKSAReplayCounters
Integer32,
hwWsecStatsTKIPCounterMeasuresInvoked
Integer32,
hwWsecStatsWpa4WayHandshakeFailures
Integer32
}
-- 1.3.6.1.4.1.2011.6.139.6.5.1.1
-- 1.3.6.1.4.1.2011.6.139.6.5.1.1
hwWsecStatsSTAAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the STA to which the statistics in this
conceptual row belong."
::= { hwWsecStatsEntry 1 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.2
-- 1.3.6.1.4.1.2011.6.139.6.5.1.2
hwWsecStatsVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RSNA version with which the STA associated."
::= { hwWsecStatsEntry 2 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.3
-- 1.3.6.1.4.1.2011.6.139.6.5.1.3
hwWsecStatsBKIDUsed OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of the last BKID of WAPI used in the last Unicast Key Negotiation Handshake.
The selector of the last PMKID of RSNA used in the last 4-Way Handshake."
::= { hwWsecStatsEntry 3 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.5.1.4
-- 1.3.6.1.4.1.2011.6.139.6.5.1.4
hwWsecStatsAuthenticationSuiteSelected OBJECT-TYPE
SYNTAX INTEGER
{
wapiCertification(1),
wapiPreShareKey(2),
wpa18021x(3),
wpa1PreShareKey(4),
wpa28021x(5),
wpa2PreShareKey(6),
shareKey(7),
openSystem(8),
wpa1wpa2PreShareKey(9),
wpa1wpa28021x(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of the last AKM suite negotiated."
::= { hwWsecStatsEntry 4 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.5.1.5
-- 1.3.6.1.4.1.2011.6.139.6.5.1.5
hwWsecStatsUnicastCipherSelected OBJECT-TYPE
SYNTAX INTEGER
{
wpiSms4(1),
wep40(2),
wep104(3),
tkip(4),
ccmp(5),
null(6),
tkipCcmp(7),
wep128(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of the last unicast cipher suite negotiated."
::= { hwWsecStatsEntry 5 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.5.1.6
-- 1.3.6.1.4.1.2011.6.139.6.5.1.6
hwWsecStatsMulticastCipherSelected OBJECT-TYPE
SYNTAX INTEGER
{
wpiSms4(1),
wep40(2),
wep104(3),
tkip(4),
ccmp(5),
null(6),
tkipCcmp(7),
wep128(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of the last multicast cipher suite negotiated"
::= { hwWsecStatsEntry 6 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.5.1.7
-- 1.3.6.1.4.1.2011.6.139.6.5.1.7
hwWsecStatsAuthenticationSuiteRequested OBJECT-TYPE
SYNTAX INTEGER
{
wapiCertification(1),
wapiPreShareKey(2),
wpa18021x(3),
wpa1PreShareKey(4),
wpa28021x(5),
wpa2PreShareKey(6),
shareKey(7),
openSystem(8),
wpa1wpa2PreShareKey(9),
wpa1wpa28021x(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of the last AKM suite requested."
::= { hwWsecStatsEntry 7 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.5.1.8
-- 1.3.6.1.4.1.2011.6.139.6.5.1.8
hwWsecStatsUnicastCipherRequested OBJECT-TYPE
SYNTAX INTEGER
{
wpiSms4(1),
wep40(2),
wep104(3),
tkip(4),
ccmp(5),
null(6),
tkipCcmp(7),
wep128(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of the last unicast cipher suite requested"
::= { hwWsecStatsEntry 8 }
-- SYNTAX OCTET STRING
-- 1.3.6.1.4.1.2011.6.139.6.5.1.9
-- 1.3.6.1.4.1.2011.6.139.6.5.1.9
hwWsecStatsMulticastCipherRequested OBJECT-TYPE
SYNTAX INTEGER
{
wpiSms4(1),
wep40(2),
wep104(3),
tkip(4),
ccmp(5),
null(6),
tkipCcmp(7),
wep128(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selector of the last multicast cipher suite requested."
::= { hwWsecStatsEntry 9 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.10
-- 1.3.6.1.4.1.2011.6.139.6.5.1.10
hwWsecStatsWEPICVErrorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when a frame is received with the Protected
Frame subfield of the Frame Control field set to one and the value
of the ICV as received in the frame does not match the ICV value that
is calculated for the contents of the received frame. ICV errors for
TKIP are not counted in this variable but in
hwWsecStatsTKIPICVErrors."
::= { hwWsecStatsEntry 10 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.11
-- 1.3.6.1.4.1.2011.6.139.6.5.1.11
hwWsecStatsWEPExcludedCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when a frame is received with the Protected
Frame subfield of the Frame Control field set to zero and the value
of hwWsecProfileExcludeUnencrypted causes that frame to be discarded."
::= { hwWsecStatsEntry 11 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.12
-- 1.3.6.1.4.1.2011.6.139.6.5.1.12
hwWsecStatsWEPUndecryptableCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when a frame is received with the
Protected Frame subfield of the Frame Control field set to one and
the WEPOn value for the key mapped to the transmitter's MAC address
indicates that the frame should not have been encrypted or that frame
is discarded due to the receiving STA not implementing the privacy
option."
::= { hwWsecStatsEntry 12 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.13
-- 1.3.6.1.4.1.2011.6.139.6.5.1.13
hwWsecStatsTKIPICVErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of TKIP ICV errors encountered when decrypting
packets for the STA."
::= { hwWsecStatsEntry 13 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.14
-- 1.3.6.1.4.1.2011.6.139.6.5.1.14
hwWsecStatsTKIPLocalMICFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of MIC failures encountered when checking the
integrity of packets received from the STA at this entity."
::= { hwWsecStatsEntry 14 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.15
-- 1.3.6.1.4.1.2011.6.139.6.5.1.15
hwWsecStatsTKIPRemoteMICFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of MIC failures encountered by the STA identified
by dot11StatsSTAAddress and reported back to this entity."
::= { hwWsecStatsEntry 15 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.16
-- 1.3.6.1.4.1.2011.6.139.6.5.1.16
hwWsecStatsTKIPReplays OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of TKIP replay errors detected."
::= { hwWsecStatsEntry 16 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.17
-- 1.3.6.1.4.1.2011.6.139.6.5.1.17
hwWsecStatsCCMPReplays OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received CCMP MPDUs discarded by the replay
mechanism."
::= { hwWsecStatsEntry 17 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.18
-- 1.3.6.1.4.1.2011.6.139.6.5.1.18
hwWsecStatsCCMPDecryptErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MPDUs discarded by the CCMP decryption
algorithm."
::= { hwWsecStatsEntry 18 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.19
-- 1.3.6.1.4.1.2011.6.139.6.5.1.19
hwWsecStatsWAISignatureErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the signature in the received WAI packet is wrong."
::= { hwWsecStatsEntry 19 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.20
-- 1.3.6.1.4.1.2011.6.139.6.5.1.20
hwWsecStatsWAIHMACErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the message authentication code in the received WAI
packet is wrong."
::= { hwWsecStatsEntry 20 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.21
-- 1.3.6.1.4.1.2011.6.139.6.5.1.21
hwWsecStatsWAIAuthenticationResultFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the WAI authentication is unsuccessful."
::= { hwWsecStatsEntry 21 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.22
-- 1.3.6.1.4.1.2011.6.139.6.5.1.22
hwWsecStatsWAIDiscardCounters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the received WAI packet is discarded."
::= { hwWsecStatsEntry 22 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.23
-- 1.3.6.1.4.1.2011.6.139.6.5.1.23
hwWsecStatsWAITimeoutCounters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the WAI packet is timeout."
::= { hwWsecStatsEntry 23 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.24
-- 1.3.6.1.4.1.2011.6.139.6.5.1.24
hwWsecStatsWAIFormatErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when there exists format error in the WAI packet."
::= { hwWsecStatsEntry 24 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.25
-- 1.3.6.1.4.1.2011.6.139.6.5.1.25
hwWsecStatsWAICertificateHandshakeFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the WAI certificate authentication is unsuccessful."
::= { hwWsecStatsEntry 25 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.26
-- 1.3.6.1.4.1.2011.6.139.6.5.1.26
hwWsecStatsWAIUnicastHandshakeFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the WAI unicast key negotiation process is
unsuccessful."
::= { hwWsecStatsEntry 26 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.27
-- 1.3.6.1.4.1.2011.6.139.6.5.1.27
hwWsecStatsWAIMulticastHandshakeFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shall increment when the WAI multicast key announcement process is
unsuccessful."
::= { hwWsecStatsEntry 27 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.28
-- 1.3.6.1.4.1.2011.6.139.6.5.1.28
hwWsecStatsWPIReplayCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received WPI MPDUs discarded by the replay mechanism."
::= { hwWsecStatsEntry 28 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.29
-- 1.3.6.1.4.1.2011.6.139.6.5.1.29
hwWsecStatsWPIDecryptableErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MPDUs discarded by the WPI decryption algorithm because of no
valid key."
::= { hwWsecStatsEntry 29 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.30
-- 1.3.6.1.4.1.2011.6.139.6.5.1.30
hwWsecStatsWPIMICErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MPDUs discarded because of the MIC check error during the WPI
decryption."
::= { hwWsecStatsEntry 30 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.31
-- 1.3.6.1.4.1.2011.6.139.6.5.1.31
hwWsecStatsControlledPortStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the state of the controlled port in a authenticator subsystem. If value
is '1', the state is set to'authenticated'; else, the state is set to 'unauthenticated'."
::= { hwWsecStatsEntry 31 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.32
-- 1.3.6.1.4.1.2011.6.139.6.5.1.32
hwWsecStatsNumberOfPTKSAReplayCounters OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of PTKSA replay counters per association:
0 ?> 1 replay counter,
1 ?> 2 replay counters,
2 ?> 4 replay counters,
3 ?> 16 replay counters"
::= { hwWsecStatsEntry 32 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.33
-- 1.3.6.1.4.1.2011.6.139.6.5.1.33
hwWsecStatsNumberOfGTKSAReplayCounters OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of GTKSA replay counters per association:
0 ?> 1 replay counter,
1 ?> 2 replay counters,
2 ?> 4 replay counters,
3 ?> 16 replay counters"
::= { hwWsecStatsEntry 33 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.34
-- 1.3.6.1.4.1.2011.6.139.6.5.1.34
hwWsecStatsTKIPCounterMeasuresInvoked OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that a TKIP MIC failure occurred two
times within 60 s and TKIP countermeasures were invoked. This
attribute counts both local and remote MIC failure events reported
to this STA. It increments every time TKIP countermeasures are
invoked"
::= { hwWsecStatsEntry 34 }
-- 1.3.6.1.4.1.2011.6.139.6.5.1.35
-- 1.3.6.1.4.1.2011.6.139.6.5.1.35
hwWsecStatsWpa4WayHandshakeFailures OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of 4-Way Handshake failures."
::= { hwWsecStatsEntry 35 }
-- 1.3.6.1.4.1.2011.6.139.6.6
-- 1.3.6.1.4.1.2011.6.139.6.6
hwWsecBatchProfileInfo OBJECT IDENTIFIER ::= { hwWlanSecurity 6 }
-- 1.3.6.1.4.1.2011.6.139.6.6.1
-- 1.3.6.1.4.1.2011.6.139.6.6.1
hwWsecBatchProfileStartNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The security profile start number in batch operation. This node is used with node
hwWsecBatchProfileWantNumber, for example, hwWsecBatchProfileStartNumber
is set to one, and hwWsecBatchProfileWantNumber is set to three, then get
the node hwWsecBatchProfileReturnNumber,hwWsecBatchProfileName,
that means start from the first security profile, get three
security profile's name list. if it dose not exist three security profile, the
hwWsecBatchProfileReturnNumber will be the real security profile number, otherwise,
it is equal to hwWsecBatchProfileWantNumber."
::= { hwWsecBatchProfileInfo 1 }
-- 1.3.6.1.4.1.2011.6.139.6.6.2
-- 1.3.6.1.4.1.2011.6.139.6.6.2
hwWsecBatchProfileWantNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The security profile number that want to get in batch operation.This node is used with node
hwWsecBatchProfileWantNumber, for example, hwWsecBatchProfileStartNumber
is set to one, and hwWsecBatchProfileWantNumber is set to three, then get
the node hwWsecBatchProfileReturnNumber,hwWsecBatchProfileName,
that means start from the first security profile, get three
security profile's name list. if it dose not exist three security profile, the
hwWsecBatchProfileReturnNumber will be the real security profile number, otherwise,
it is equal to hwWsecBatchProfileWantNumber."
::= { hwWsecBatchProfileInfo 2 }
-- 1.3.6.1.4.1.2011.6.139.6.6.3
-- 1.3.6.1.4.1.2011.6.139.6.6.3
hwWsecBatchProfileReturnNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ess number get in batch operation."
::= { hwWsecBatchProfileInfo 3 }
-- 1.3.6.1.4.1.2011.6.139.6.6.4
-- 1.3.6.1.4.1.2011.6.139.6.6.4
hwWsecBatchProfileName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The names of security profile which are determined by node hwWsecBatchProfileStratNumber
and node hwWsecBatchProfileWantNumber.
each hwWsecProfileName name is divided by '?'."
::= { hwWsecBatchProfileInfo 4 }
-- 1.3.6.1.4.1.2011.6.139.6.9
-- 1.3.6.1.4.1.2011.6.139.6.9
hwWsecNotifications OBJECT IDENTIFIER ::= { hwWlanSecurity 9 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1
-- 1.3.6.1.4.1.2011.6.139.6.9.1
hwWsecNotify OBJECT IDENTIFIER ::= { hwWsecNotifications 1 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.1
-- 1.3.6.1.4.1.2011.6.139.6.9.1.1
hwStaAuthErrorNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwApMac, hwRadioID, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac, hwStaAuthenticationMode, hwStaFailCodeType, hwStaAuthenticationFailCause, hwStaAuthenticationFailCauseStr
}
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 1 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.2
-- 1.3.6.1.4.1.2011.6.139.6.9.1.2
hwStaAssociationFailNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwApMac, hwRadioID, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac, hwStaFailCodeType, hwStaAssociationFailCause, hwStaAssociationFailCauseStr }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 2 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.3
-- 1.3.6.1.4.1.2011.6.139.6.9.1.3
hwUserWithInvalidCerficationInbreakNetworkNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwRadioID, hwApMac, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 3 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.4
-- 1.3.6.1.4.1.2011.6.139.6.9.1.4
hwStationRepititiveAttackNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwRadioID, hwApMac, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 4 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.5
-- 1.3.6.1.4.1.2011.6.139.6.9.1.5
hwTamperAttackNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwRadioID, hwApMac, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 5 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.6
-- 1.3.6.1.4.1.2011.6.139.6.9.1.6
hwLowSafeLevelAttackNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwRadioID, hwApMac, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 6 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.7
-- 1.3.6.1.4.1.2011.6.139.6.9.1.7
hwAddressRedirectionAttackNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwRadioID, hwApMac, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 7 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.8
hwWepIDConflictNotify NOTIFICATION-TYPE
OBJECTS { hwWepIDConflictTrapAPMAC, hwWepIDConflictTrapAPID, hwWepIDConflictTrapRadioId, hwWepIDConflictTrapPreSSID, hwWepIDConflictTrapCurrSSID,
hwWepIDConflictTrapCipherIdx }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 8 }
-- 1.3.6.1.4.1.2011.6.139.6.9.1.9
hwStaAuthEncryptModeNotMatchNotify NOTIFICATION-TYPE
OBJECTS { hwApIndex, hwApMac, hwRadioID, hwStaAssocBssid, hwWlanServiceEssSsid,
hwWlanServiceStaMac, hwWlanStaAuthEncryptMode, hwWlanVapAuthEncryptMode }
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotify 9 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2
-- 1.3.6.1.4.1.2011.6.139.6.9.2
hwWsecNotifyObjects OBJECT IDENTIFIER ::= { hwWsecNotifications 2 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.1
-- 1.3.6.1.4.1.2011.6.139.6.9.2.1
hwStaAuthenticationMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 1 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.2
-- 1.3.6.1.4.1.2011.6.139.6.9.2.2
hwStaAuthenticationFailCause OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 2 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.3
-- 1.3.6.1.4.1.2011.6.139.6.9.2.3
hwStaAssociationFailCause OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 3 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.4
-- 1.3.6.1.4.1.2011.6.139.6.9.2.4
hwStaAssocBssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 4 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.5
hwStaFailCodeType OBJECT-TYPE
SYNTAX INTEGER
{
reasonCode(1),
statusCode(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 5 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.6
hwWepIDConflictTrapAPMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 6 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.7
hwWepIDConflictTrapAPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 7 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.8
hwWepIDConflictTrapRadioId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 8 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.9
hwWepIDConflictTrapPreSSID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 9 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.10
hwWepIDConflictTrapCurrSSID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 10 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.11
hwWepIDConflictTrapCipherIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 11 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.12
hwWlanStaAuthEncryptMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 12 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.13
hwWlanVapAuthEncryptMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 13 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.14
hwStaAuthenticationFailCauseStr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 14 }
-- 1.3.6.1.4.1.2011.6.139.6.9.2.15
hwStaAssociationFailCauseStr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { hwWsecNotifyObjects 15 }
hwWlanSecurityObject OBJECT IDENTIFIER ::= { hwWlanSecurity 10 }
hwWlanSecurityConformance OBJECT IDENTIFIER ::= { hwWlanSecurity 11 }
hwWlanSecurityCompliances OBJECT IDENTIFIER ::= { hwWlanSecurityConformance 1 }
hwWlanSecurityCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE -- this module
MANDATORY-GROUPS { hwWsecProfileGroup, hwWsecWEPDefaultKeysGroup, hwWsecWEPKeyMappingsGroup, hwWsecAuthSuitesGroup, hwWsecStatsGroup,
hwWsecBatchProfileInfoGroup, hwWsecNotifyGroup, hwWsecNotifyObjectsGroup }
::= { hwWlanSecurityCompliances 1 }
hwWlanSecurityObjectGroups OBJECT IDENTIFIER ::= { hwWlanSecurityConformance 2 }
hwWsecProfileGroup OBJECT-GROUP
OBJECTS { hwWsecProfileName, hwWsecProfileWEPDataEncrypt, hwWsecProfileWEPDefaultKeyID, hwWsecProfileWEPKeyMappingLength, hwWsecProfileAsuIpAddr, hwWsecProfileCaCertFileName,
hwWsecProfileAsuCertFileName, hwWsecProfileAcCertFileName, hwWsecProfileAcPrvKeyFileName, hwWsecProfileRsnaVersion, hwWsecProfileWapiVersion,
hwWsecProfileRowStatus, hwWsecProfileCaPfxPassword, hwWsecProfileCaCertState, hwWsecProfileAsuPfxPassword, hwWsecProfileAsuCertState,
hwWsecProfileAcPfxPassword, hwWsecProfileAcCertState, hwWsecProfileKeyPfxPassword, hwWsecProfileAsuType, hwWsecProfileWpaPtkRekeySwitch,
hwWsecProfileWpa2PtkRekeySwitch,hwWsecProfileWpaWpa2PtkRekeySwitch,hwWsecProfileWpaPtkRekeyInterval,hwWsecProfileWpa2PtkRekeyInterval, hwWsecProfileWpaWpa2PtkRekeyInterval }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 1 }
hwWsecWEPDefaultKeysGroup OBJECT-GROUP
OBJECTS { hwWsecWEPDefaultKeyValue, hwWsecWEPPassPhrase }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 2 }
hwWsecWEPKeyMappingsGroup OBJECT-GROUP
OBJECTS { hwWsecWEPKeyMappingAddress, hwWsecWEPKeyMappingWEPOn, hwWsecWEPKeyMappingValue, hwWsecWEPKeyMappingStatus }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 3 }
hwWsecAuthSuitesGroup OBJECT-GROUP
OBJECTS { hwWsecAuthSuite, hwWsecAuthSuiteEnabled, hwWsecAuthPreauthenticationImplemented, hwWsecAuthPreauthenticationEnabled, hwWsecAuthUnicastKeysSupported,
hwWsecAuthPairwiseCipher, hwWsecAuthPairwiseCipherSize, hwWsecAuthUnicastRekeyMethod, hwWsecAuthUnicastRekeyTime, hwWsecAuthUnicastRekeyPackets,
hwWsecAuthMulticastCipher, hwWsecAuthMulticastCipherSize, hwWsecAuthMulticastRekeyMethod, hwWsecAuthMulticastRekeyTime, hwWsecAuthMulticastRekeyPackets,
hwWsecAuthMulticastRekeyStrict, hwWsecAuthPSKValue, hwWsecAuthPSKPassPhrase, hwWsecAuthCertificateUpdateCount, hwWsecAuthMulticastUpdateCount,
hwWsecAuthUnicastUpdateCount, hwWsecAuthBKLifetime, hwWsecAuthBKReauthThreshold, hwWsecAuthSATimeout, hwWsecAuthExcludeUnencrypted,
hwWsecAuthDot1XMethod, hwWsecAuthControlledAuthControl, hwWsecAuthControlledPortControl, hwWsecAuthOptionalImplemented }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 4 }
hwWsecStatsGroup OBJECT-GROUP
OBJECTS { hwWsecStatsSTAAddress, hwWsecStatsVersion, hwWsecStatsBKIDUsed, hwWsecStatsAuthenticationSuiteSelected, hwWsecStatsUnicastCipherSelected, hwWsecStatsMulticastCipherSelected,
hwWsecStatsAuthenticationSuiteRequested, hwWsecStatsUnicastCipherRequested, hwWsecStatsMulticastCipherRequested, hwWsecStatsWEPICVErrorCount, hwWsecStatsWEPExcludedCount,
hwWsecStatsWEPUndecryptableCount, hwWsecStatsTKIPICVErrors, hwWsecStatsTKIPLocalMICFailures, hwWsecStatsTKIPRemoteMICFailures, hwWsecStatsTKIPReplays,
hwWsecStatsCCMPReplays, hwWsecStatsCCMPDecryptErrors, hwWsecStatsWAISignatureErrors, hwWsecStatsWAIHMACErrors, hwWsecStatsWAIAuthenticationResultFailures,
hwWsecStatsWAIDiscardCounters, hwWsecStatsWAITimeoutCounters, hwWsecStatsWAIFormatErrors, hwWsecStatsWAICertificateHandshakeFailures, hwWsecStatsWAIUnicastHandshakeFailures,
hwWsecStatsWAIMulticastHandshakeFailures, hwWsecStatsWPIReplayCounter, hwWsecStatsWPIDecryptableErrors, hwWsecStatsWPIMICErrors, hwWsecStatsControlledPortStatus,
hwWsecStatsNumberOfPTKSAReplayCounters, hwWsecStatsNumberOfGTKSAReplayCounters, hwWsecStatsTKIPCounterMeasuresInvoked, hwWsecStatsWpa4WayHandshakeFailures }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 5 }
hwWsecBatchProfileInfoGroup OBJECT-GROUP
OBJECTS { hwWsecBatchProfileStartNumber, hwWsecBatchProfileWantNumber, hwWsecBatchProfileReturnNumber, hwWsecBatchProfileName }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 6 }
hwWsecNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwStaAuthErrorNotify, hwStaAssociationFailNotify, hwUserWithInvalidCerficationInbreakNetworkNotify, hwStationRepititiveAttackNotify, hwTamperAttackNotify,
hwLowSafeLevelAttackNotify, hwAddressRedirectionAttackNotify, hwWepIDConflictNotify, hwStaAuthEncryptModeNotMatchNotify }
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 7 }
hwWsecNotifyObjectsGroup OBJECT-GROUP
OBJECTS { hwStaAuthenticationMode, hwStaAuthenticationFailCause, hwStaAssociationFailCause, hwStaAssocBssid, hwStaFailCodeType,
hwWepIDConflictTrapAPMAC, hwWepIDConflictTrapAPID, hwWepIDConflictTrapRadioId, hwWepIDConflictTrapPreSSID, hwWepIDConflictTrapCurrSSID,
hwWepIDConflictTrapCipherIdx, hwWlanStaAuthEncryptMode, hwWlanVapAuthEncryptMode, hwStaAuthenticationFailCauseStr, hwStaAssociationFailCauseStr
}
STATUS current
DESCRIPTION
"Description."
::= { hwWlanSecurityObjectGroups 8 }
END
--
-- HUAWEI-WLAN-SECURITY-MIB.mib
--