8402 lines
431 KiB
Plaintext
8402 lines
431 KiB
Plaintext
-- ============================================================================
|
|
-- Copyright (C) 2015 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
-- Description: The MIB is used for xDSL Configuration according to the Vector
|
|
-- of Profiles (VoP) data model specified in Broadband Forum
|
|
-- Technical Report TR-252
|
|
-- (http://www.broadband-forum.org/technical/download/TR-252_Issue-3.pdf).
|
|
-- Reference:
|
|
-- Version: V1.30
|
|
--
|
|
-- ============================================================================
|
|
|
|
HUAWEI-VOP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, Integer32, Unsigned32, Gauge32, OBJECT-TYPE,
|
|
MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TruthValue, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
huaweiUtility
|
|
FROM HUAWEI-MIB
|
|
ifIndex
|
|
FROM IF-MIB
|
|
hwConfigChangeIP
|
|
FROM HUAWEI-DEVICE-MIB;
|
|
|
|
hwVOPGlobalModule MODULE-IDENTITY
|
|
LAST-UPDATED "201511070000Z"
|
|
ORGANIZATION
|
|
"Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION
|
|
"The MIB is used for xDSL Configuration according to the Vector
|
|
of Profiles (VoP) data model specified in Broadband Forum
|
|
Technical Report TR-252
|
|
(http://www.broadband-forum.org/technical/download/TR-252_Issue-3.pdf)."
|
|
|
|
-- Revision history
|
|
REVISION "201511070000Z"
|
|
DESCRIPTION "V1.30,Added the definition of HWVOPGfastFraVendisc.
|
|
Add leaf node hwVOPGfastLineSpectrumConfProfGfastCarMaskDs,hwVOPGfastLineSpectrumConfProfGfastCarMaskUs in hwVOPLineSpectrumConfProfTable.
|
|
Modified the value range of the leaves: hwVOPGfastLineSpectrumConfProfLowFreqEdgeValue.
|
|
Add leaf node hwVOPGfastSosConfProfFraVenDiscDs, hwVOPGfastSosConfProfFraVenDiscUs in hwVOPSosConfProfTable.
|
|
"
|
|
|
|
REVISION "201509240000Z"
|
|
DESCRIPTION "V1.29,Add leaf node hwVOPGfastSNRMarginConfProfTaretSnrmRmcDs,hwVOPGfastSNRMarginConfProfTaretSnrmRmcUs,
|
|
hwVOPGfastSNRMarginConfProfMinSnrmRmcDs,hwVOPGfastSNRMarginConfProfMinSnrmRmcUs,hwVOPGfastSNRMarginConfProfMaxBLRmcDs,
|
|
hwVOPGfastSNRMarginConfProfMaxBLRmcUs in hwVOPSNRMarginConfProfTable."
|
|
|
|
REVISION "201508130000Z"
|
|
DESCRIPTION "V1.28,Modify the definition of Xdsl2LineClassMask."
|
|
|
|
REVISION "201507100000Z"
|
|
DESCRIPTION "V1.27,Modify the description of leaf node: hwVOPDPBOConfProfFMax."
|
|
|
|
REVISION "201506210000Z"
|
|
DESCRIPTION "V1.26,Modified the definition of textual conventions: Xdsl2LineProfiles, Xdsl2LineLimitMask, Xdsl2LineUs0Disable.
|
|
Modified the value range of the leaves: hwVOPDataRateConfProfMinDataRate, hwVOPDataRateConfProfMinResDataRate,
|
|
hwVOPDataRateConfProfMaxDataRate, hwVOPDataRateConfProfMinDataRateLowPwr, hwVOPDataRateConfProfUsDataRate,
|
|
hwVOPDataRateConfProfDsDataRate, hwVOPDataRateConfProfMinEtrRtx, hwVOPDataRateConfProfMaxEtrRtx, hwVOPDataRateConfProfMaxNdrRtx,
|
|
hwVOPDataRateConfProfMaxDataRateLowPwr, hwVOPDPBOConfProfFMax, hwVOPGfastDataRateConfProfDsDataRate.
|
|
"
|
|
|
|
REVISION "201506120000Z"
|
|
DESCRIPTION "V1.25,Modify the description of hwVOPGfastSosConfProfFraTimeDs(16) and hwVOPGfastSosConfProfFraTimeUs(17)."
|
|
|
|
REVISION "201505180000Z"
|
|
DESCRIPTION "V1.24,Modify the status of the nodes to obsoleted:hwVOPGfastDataRateConfProfMaxEtr, hwVOPGfastSNRMarginConfProfSnrModeDs,
|
|
hwVOPGfastSNRMarginConfProfSnrModeUs, hwVOPGfastSNRMarginConfProfRaModeDs, hwVOPGfastSNRMarginConfProfRaModeUs."
|
|
|
|
REVISION "201503180000Z"
|
|
DESCRIPTION "V1.23,Modified the SYNTAX BITS name of HWVOPGfastProfiles."
|
|
|
|
REVISION "201412050000Z"
|
|
DESCRIPTION "V1.22,Modified the default value of these leaf nodes:hwVOPGfastINPDelayConfProfMaxDelayRtxDs,hwVOPGfastINPDelayConfProfMaxDelayRtxUs.
|
|
"
|
|
|
|
REVISION "201411130000Z"
|
|
DESCRIPTION "V1.21,Modified the definition of Xdsl2TransmissionModeType.
|
|
Added the definition of HWVOPGfastProfiles,HWVOPGfastIarBands,HWVOPGfastRaMode and HWVOPGfastPsdMask.
|
|
Added the definition of these leaf nodes:hwVOPGfastDataRateConfProfMinEtr,hwVOPGfastDataRateConfProfMaxEtr,hwVOPGfastDataRateConfProfMaxNdr,
|
|
hwVOPGfastDataRateConfProfUsDataRate,hwVOPGfastDataRateConfProfDsDataRate,hwVOPGfastLineSpectrumConfProfGfastProfiles,hwVOPGfastLineSpectrumConfProfLowFreqEdgeValue,
|
|
hwVOPGfastLineSpectrumConfProfGfastCarMask,hwVOPGfastModeSpecificPSDConfProfPsdMaskDs,hwVOPGfastModeSpecificPSDConfProfPsdMaskUs,hwVOPGfastModeSpecificPSDConfProfMaxNomAtpDs,
|
|
hwVOPGfastModeSpecificPSDConfProfMaxNomAtpUs,hwVOPGfastUPBOConfProfUpboKL,hwVOPGfastUPBOConfProfUpboKLF,hwVOPGfastUPBOConfProfKlAuto,hwVOPGfastUPBOConfProfUpboKLREF,
|
|
hwVOPGfastUPBOConfProfPsdA,hwVOPGfastUPBOConfProfPsdB,hwVOPGfastRFIConfProfRfiBands,hwVOPGfastRFIConfProfIarBands,hwVOPGfastSNRMarginConfProfMinSnrmDs,
|
|
hwVOPGfastSNRMarginConfProfMinSnrmUs,hwVOPGfastSNRMarginConfProfTargetSnrmDs,hwVOPGfastSNRMarginConfProfTargetSnrmUs,hwVOPGfastSNRMarginConfProfMaxSnrmDs,
|
|
hwVOPGfastSNRMarginConfProfMaxSnrmUs,hwVOPGfastSNRMarginConfProfSnrModeDs,hwVOPGfastSNRMarginConfProfSnrModeUs,hwVOPGfastSNRMarginConfProfRaModeDs,hwVOPGfastSNRMarginConfProfRaModeUs,
|
|
hwVOPGfastSNRMarginConfProfRaUsNrmDs,hwVOPGfastSNRMarginConfProfRaUsNrmUs,hwVOPGfastSNRMarginConfProfRaDsNrmDs,hwVOPGfastSNRMarginConfProfRaDsNrmUs,hwVOPGfastSNRMarginConfProfUsTimeDs,
|
|
hwVOPGfastSNRMarginConfProfUsTimeUs,hwVOPGfastSNRMarginConfProfDsTimeDs,hwVOPGfastSNRMarginConfProfDsTimeUs,hwVOPGfastINPDelayConfProfMaxDelayRtxDs,hwVOPGfastINPDelayConfProfMaxDelayRtxUs,
|
|
hwVOPGfastINPDelayConfProfMinInpShineRtxDs,hwVOPGfastINPDelayConfProfMinInpShineRtxUs,hwVOPGfastINPDelayConfProfShineRatioRtxDs,hwVOPGfastINPDelayConfProfShineRatioRtxUs,
|
|
hwVOPGfastINPDelayConfProfMinInpReinRtxDs,hwVOPGfastINPDelayConfProfMinInpReinRtxUs,hwVOPGfastINPDelayConfProfIatReinRtxDs,hwVOPGfastINPDelayConfProfIatReinRtxUs,
|
|
hwVOPGfastINPDelayConfProfMinRNRatioRtxDs,hwVOPGfastINPDelayConfProfMinRNRatioRtxUs,hwVOPGfastSosConfProfFraTimeDs,hwVOPGfastSosConfProfFraTimeUs,hwVOPGfastSosConfProfFraNtonesDs,
|
|
hwVOPGfastSosConfProfFraNtonesUs,hwVOPGfastSosConfProfFraMinRtxUcDs,hwVOPGfastSosConfProfFraMinRtxUcUs."
|
|
|
|
REVISION "201410130000Z"
|
|
DESCRIPTION "V1.20,modified the value range of hwVOPSetupSosProfId."
|
|
|
|
REVISION "201408180000Z"
|
|
DESCRIPTION "V1.19,modified the definition of Xdsl2RaMode."
|
|
|
|
REVISION "201406300000Z"
|
|
DESCRIPTION "V1.18, Modify the version of the mib."
|
|
|
|
REVISION "201405230000Z"
|
|
DESCRIPTION "V1.17, modify the reference from TR-165 to TR-252 and the reference paragraph.
|
|
Add the leaves hwVOPDataRateConfProfMaxDataRateLowPwr, hwVOPDataRateConfProfL2MinDataRateToL0ActDataRate
|
|
in hwVOPDataRateConfProfTable.
|
|
"
|
|
|
|
REVISION "201405050000Z"
|
|
DESCRIPTION "V1.16, modify the reference from TR-165 to TR-252 and the reference paragraph.
|
|
Add the leave hwVOPDataRateConfProfMinSosBr in hwVOPDataRateConfProfTable.
|
|
Add the definition of the table hwVOPSosConfProfTable and these leaf nodes hwVOPSosProfileIndexNext,
|
|
hwVOPSetupSosProfId, hwVOPSetupSosProfDescription, hwVOPActSetupSosProfId, hwVOPActSetupSosProfDescription
|
|
for the Save our Showtime Profile.
|
|
Modified the leaf nodes hwVOPProfileIDChangeTrap for supporting the Save our Showtime Profile.
|
|
Modified the description of leaf nodes Xdsl2LineClassMask.
|
|
Delete the reference of hwVOPLineSpectrumConfProfXtuTransSysEna.
|
|
Add leaf nodes hwVOPINPDelayConfProfMaxDelayOctetSplit in hwVOPINPDelayConfProfTable.
|
|
"
|
|
|
|
REVISION "201308010000Z"
|
|
DESCRIPTION "V1.15, added hwOntVdsl2VOPSetupTable.
|
|
"
|
|
REVISION "201302230000Z"
|
|
DESCRIPTION "V1.14, Modified leaf node hwVOPModeSpecificPSDConfProfMaxNomAtpDs and hwVOPModeSpecificPSDConfProfMaxNomAtpUs value
|
|
range from (0..255) to (0..510).
|
|
"
|
|
|
|
REVISION "201112020000Z"
|
|
DESCRIPTION "V1.13, added the definition of these leaf nodes:hwVOPUPBOConfProfAeleMode, hwVOPUPBOConfProfUpboElmt.
|
|
"
|
|
REVISION "201107200000Z"
|
|
DESCRIPTION "V1.12, added the the definition of these leaf nodes:hwVOPSetupUsDataRateProf1Description,hwVOPSetupDsDataRateProf1Description,hwVOPSetupInpDelayProf1Description,
|
|
hwVOPSetupUsDataRateProf2Description,hwVOPSetupDsDataRateProf2Description,hwVOPSetupInpDelayProf2Description,hwVOPSetupLSpectrumProfDescription,
|
|
hwVOPSetupUpboProfDescription,hwVOPSetupDpboProfDescription,hwVOPSetupRfiProfDescription,hwVOPSetupNoiseMarginProfDescription,hwVOPSetupVNoiseProfDescription,
|
|
hwVOPSetupInmProfDescription,hwVOPActSetupUsDataRateProf1Description,hwVOPActSetupDsDataRateProf1Description,hwVOPActSetupInpDelayProf1Description,
|
|
hwVOPActSetupUsDataRateProf2Description,hwVOPActSetupDsDataRateProf2Description,hwVOPActSetupInpDelayProf2Description,hwVOPActSetupLSpectrumProfDescription,
|
|
hwVOPActSetupUpboProfDescription,hwVOPActSetupDpboProfDescription,hwVOPActSetupRfiProfDescription,hwVOPActSetupNoiseMarginProfDescription,
|
|
hwVOPActSetupVNoiseProfDescription,hwVOPActSetupInmProfDescription.
|
|
Modified the range of these leaf nodes: hwVOPDataRateConfProfIndex, hwVOPLineSpectrumConfProfIndex, hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed,
|
|
hwVOPModeSpecificPSDConfProfIndex, hwVOPUPBOConfProfIndex, hwVOPDPBOConfProfIndex, hwVOPRFIConfProfIndex, hwVOPSNRMarginConfProfIndex, hwVOPINPDelayConfProfIndex,
|
|
hwVOPVirtualNoiseConfProfIndex, hwVOPINMConfProfIndex, hwVOPSetupUsDataRateProfId1, hwVOPSetupDsDataRateProfId1, hwVOPSetupInpDelayProfId1,
|
|
hwVOPSetupUsDataRateProfId2, hwVOPSetupDsDataRateProfId2, hwVOPSetupInpDelayProfId2, hwVOPSetupUsDataRateProfId3, hwVOPSetupDsDataRateProfId3,
|
|
hwVOPSetupInpDelayProfId3, hwVOPSetupUsDataRateProfId4, hwVOPSetupDsDataRateProfId4, hwVOPSetupInpDelayProfId4, hwVOPSetupLSpectrumProfId, hwVOPSetupUpboProfId,
|
|
hwVOPSetupDpboProfId, hwVOPSetupRfiProfId, hwVOPSetupNoiseMarginProfId, hwVOPSetupVNoiseProfId, hwVOPSetupInmProfId, hwVOPActSetupUsDataRateProfId1,
|
|
hwVOPActSetupDsDataRateProfId1, hwVOPActSetupInpDelayProfId1, hwVOPActSetupUsDataRateProfId2, hwVOPActSetupDsDataRateProfId2, hwVOPActSetupInpDelayProfId2,
|
|
hwVOPActSetupUsDataRateProfId3, hwVOPActSetupDsDataRateProfId3, hwVOPActSetupInpDelayProfId3, hwVOPActSetupUsDataRateProfId4, hwVOPActSetupDsDataRateProfId4,
|
|
hwVOPActSetupInpDelayProfId4, hwVOPActSetupLSpectrumProfId, hwVOPActSetupNoiseMarginProfId, hwVOPActSetupVNoiseProfId, hwVOPActSetupUpboProfId,
|
|
hwVOPActSetupDpboProfId, hwVOPActSetupRfiProfId, hwVOPActSetupInmProfId.
|
|
Modify the status of the nodes to deprecated:hwVOPModeSpecificPSDConfProfXdslMode.
|
|
"
|
|
REVISION "201106080000Z"
|
|
DESCRIPTION "V1.11, modified the description of leaf node:hwVOPINPDelayConfProfInitPolicy.
|
|
Modified the range of the Xdsl2ChInitPolicy type.
|
|
Add the range of the leaf node:hwVOPDataRateConfProfMinDataRate,hwVOPDataRateConfProfMinResDataRate,hwVOPDataRateConfProfMaxDataRate,hwVOPDataRateConfProfMinDataRateLowPwr,
|
|
hwVOPDataRateConfProfUsDataRate,hwVOPDataRateConfProfDsDataRate,hwVOPDataRateConfProfMinEtrRtx,hwVOPDataRateConfProfMaxEtrRtx,hwVOPDataRateConfProfMaxNdrRtx.
|
|
"
|
|
REVISION "201105030000Z"
|
|
DESCRIPTION "V1.10, add the definition of the table hwVOPINMConfProfTable and these leaf nodes hwVOPINMProfileIndexNext,hwVOPSetupInmProfIdhwVOPActSetupInmProfId
|
|
for the Impulse Noise Monitoring Profile.
|
|
Modified the leaf nodes hwVOPProfileIDChangeTrap for supporting the Impulse Noise Monitoring Profile.
|
|
Modified the default value of the leaf node:hwVOPModeSpecificPSDConfProfMaxNomPsdUs.
|
|
Modified the units of the leaf node:hwVOPDPBOConfProfMus.
|
|
"
|
|
REVISION "201102210000Z"
|
|
DESCRIPTION "V1.09, modified the description of these leaf nodes about default value:hwVOPLineSpectrumConfProfL2Time,hwVOPLineSpectrumConfProfL2Atpr,hwVOPLineSpectrumConfProfL2Atprt,
|
|
hwVOPLineSpectrumConfProfBitSwapDs,hwVOPLineSpectrumConfProfBitSwapUs,hwVOPModeSpecificPSDConfProfMaxNomPsdDs,hwVOPModeSpecificPSDConfProfMaxNomPsdUs,
|
|
hwVOPModeSpecificPSDConfProfMaxNomAtpDs,hwVOPModeSpecificPSDConfProfMaxNomAtpUs,hwVOPModeSpecificPSDConfProfaxAggRxPwrUs,hwVOPModeSpecificPSDConfProfClassMask,
|
|
hwVOPUPBOConfProfPsdAUs1,hwVOPUPBOConfProfPsdBUs1,hwVOPUPBOConfProfPsdAUs2,hwVOPUPBOConfProfPsdBUs2,hwVOPDPBOConfProfCableModelA,hwVOPDPBOConfProfCableModelB,
|
|
hwVOPDPBOConfProfCableModelC,hwVOPDPBOConfProfMus,hwVOPDPBOConfProfFMin,hwVOPDPBOConfProfFMax,hwVOPSNRMarginConfProfMinSnrmDs,hwVOPSNRMarginConfProfMinSnrmUs,
|
|
hwVOPSNRMarginConfProfMinSnrmUs,hwVOPSNRMarginConfProfMaxSnrmDs,hwVOPSNRMarginConfProfMaxSnrmUs,hwVOPSNRMarginConfProfRaModeDs,hwVOPSNRMarginConfProfRaModeUs,
|
|
hwVOPSNRMarginConfProfRaUsNrmDs,hwVOPSNRMarginConfProfRaUsNrmUs.
|
|
"
|
|
|
|
REVISION "201012220000Z"
|
|
DESCRIPTION "V1.08, modified the definition of these leaf nodes:hwVOPDataRateConfProfMinDataRate,hwVOPDataRateConfProfMaxDataRate,
|
|
hwVOPDataRateConfProfUsDataRate,hwVOPDataRateConfProfDsDataRate,hwVOPLineSpectrumConfProfForceInpDs,hwVOPLineSpectrumConfProfForceInpUs,
|
|
hwVOPINPDelayConfProfMinProtectionDs,hwVOPINPDelayConfProfMinProtection8Ds,hwVOPINPDelayConfProfMaxDelayDs,hwVOPINPDelayConfProfMinProtectionUs,
|
|
hwVOPINPDelayConfProfMinProtection8Us,hwVOPINPDelayConfProfMaxDelayUs and hwVOPINPDelayConfProfInitPolicy.
|
|
add these leaf nodes:hwadsl2LineAlarmConfProfileXtucThresh15MinLeftrs,hwVOPDataRateConfProfMinEtrRtx,hwVOPDataRateConfProfMaxEtrRtx,
|
|
hwVOPDataRateConfProfMaxNdrRtx,hwVOPLineSpectrumConfProfRtxModeDs,hwVOPLineSpectrumConfProfRtxModeUs,hwVOPLineSpectrumConfProfLeftrThreshDs,
|
|
hwVOPLineSpectrumConfProfLeftrThreshUs,hwVOPINPDelayConfProfMaxDelayRtxDs,hwVOPINPDelayConfProfMaxDelayRtxUs,hwVOPINPDelayConfProfMinDelayRtxDs,
|
|
hwVOPINPDelayConfProfMinDelayRtxUs,hwVOPINPDelayConfProfMinInpShineRtxDs,hwVOPINPDelayConfProfMinInpShineRtxUs,hwVOPINPDelayConfProfMinInp8ShineRtxDs,
|
|
hwVOPINPDelayConfProfMinInp8ShineRtxUs,hwVOPINPDelayConfProfShineRatioRtxDs,hwVOPINPDelayConfProfShineRatioRtxUs,hwVOPINPDelayConfProfMinInpReinRtxDs,
|
|
hwVOPINPDelayConfProfMinInpReinRtxUs,hwVOPINPDelayConfProfMinInp8ReinRtxDs,hwVOPINPDelayConfProfMinInp8ReinRtxUs,hwVOPINPDelayConfProfIatReinRtxDs,
|
|
hwVOPINPDelayConfProfIatReinRtxUs.
|
|
"
|
|
REVISION "201012100000Z"
|
|
DESCRIPTION "V1.07, Modified the range of the leaf node:hwVOPSetupUpboProfId, hwVOPActSetupUpboProfId."
|
|
|
|
REVISION "201009150000Z"
|
|
DESCRIPTION "V1.06, modified the definition of hwVOPVirtualNoiseConfProfTxRefVnDs and hwVOPVirtualNoiseConfProfTxRefVnUs.
|
|
Modified the range of the leaf node:hwVOPDataRateConfProfIndex, hwVOPLineSpectrumConfProfIndex,
|
|
hwVOPModeSpecificPSDConfProfIndex, hwVOPUPBOConfProfIndex, hwVOPDPBOConfProfIndex, hwVOPRFIConfProfIndex,
|
|
hwVOPSNRMarginConfProfIndex, hwVOPINPDelayConfProfIndex, hwVOPVirtualNoiseConfProfIndex and related leaf."
|
|
|
|
REVISION "201007010000Z"
|
|
DESCRIPTION "V1.05, modified the definition of the trap node hwVOPProfileIDChangeTrap for trap optimization.
|
|
Added the definition of the leaf node hwVOPDPBOConfFEXTFactor in hwVOPDPBOConfProfEntry."
|
|
|
|
REVISION "201005170000Z"
|
|
DESCRIPTION "V1.04, modified the hwVOPLineSpectrumConfProfL3Time ranges from 0 to 65535 seconds.
|
|
Deleted adlu128Eu128(10) in Xdsl2LinePsdMaskSelectUs for standard."
|
|
|
|
REVISION "201004150000Z"
|
|
DESCRIPTION "V1.03, modified the range of the Xdsl2LinePsdMaskSelectUs type.
|
|
Modified the range of the Xdsl2RfiBands type."
|
|
|
|
REVISION "201003300000Z"
|
|
DESCRIPTION "V1.02, modified the range of the hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed."
|
|
|
|
REVISION "201003150000Z"
|
|
DESCRIPTION "V1.01, add MIB for Vector of Profiles (VoP) management."
|
|
|
|
REVISION "201001250000Z"
|
|
DESCRIPTION "V1.00, initial version"
|
|
|
|
::= { huaweiUtility 144 }
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
|
|
Xdsl2MaxBer ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects with this syntax are configuration parameters
|
|
that reference the maximum Bit Error Rate (BER).
|
|
Options:
|
|
1. eminus3 (1) - Maximum BER=E^-3
|
|
2. eminus5 (2) - Maximum BER=E^-5
|
|
3. eminus7 (3) - Maximum BER=E^-7
|
|
"
|
|
SYNTAX INTEGER {
|
|
eminus3(1),
|
|
eminus5(2),
|
|
eminus7(3)
|
|
}
|
|
|
|
Xdsl2TransmissionModeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of xDSL line transmission modes, with one bit
|
|
per mode. The notes (F) and (L) denote Full-Rate and
|
|
Lite/splitterless respectively.
|
|
Options:
|
|
Bit 00 : Regional Std. (ANSI T1.413) (F)
|
|
Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
|
|
Bit 02 : G.992.1 POTS non-overlapped (F)
|
|
Bit 03 : G.992.1 POTS overlapped (F)
|
|
Bit 04 : G.992.1 ISDN non-overlapped (F)
|
|
Bit 05 : G.992.1 ISDN overlapped (F)
|
|
Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
|
|
Bit 07 : G.992.1 TCM-ISDN overlapped (F)
|
|
Bit 08 : G.992.2 POTS non-overlapped (L)
|
|
Bit 09 : G.992.2 POTS overlapped (L)
|
|
Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
|
|
Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
|
|
Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1
|
|
Bit 13-17: Reserved
|
|
Bit 18 : G.992.3 POTS non-overlapped (F)
|
|
Bit 19 : G.992.3 POTS overlapped (F)
|
|
Bit 20 : G.992.3 ISDN non-overlapped (F)
|
|
Bit 21 : G.992.3 ISDN overlapped (F)
|
|
Bit 22-23: Reserved
|
|
Bit 24 : G.992.4 POTS non-overlapped (L)
|
|
Bit 25 : G.992.4 POTS overlapped (L)
|
|
Bit 26-27: Reserved
|
|
Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
|
|
Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
|
|
Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
|
|
Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
|
|
Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
|
|
Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
|
|
Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
|
|
wide U/S (F)
|
|
Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
|
|
narrow U/S(F)
|
|
Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
|
|
wide U/S (F)
|
|
Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
|
|
narrow U/S (F)
|
|
Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
|
|
Bit 39 : G.992.3 Annex M POTS overlapped (F)
|
|
Bit 40 : G.992.5 POTS non-overlapped (F)
|
|
Bit 41 : G.992.5 POTS overlapped (F)
|
|
Bit 42 : G.992.5 ISDN non-overlapped (F)
|
|
Bit 43 : G.992.5 ISDN overlapped (F)
|
|
Bit 44-45: Reserved
|
|
Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
|
|
Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
|
|
Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
|
|
Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
|
|
Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
|
|
Bit 51 : G.992.5 Annex M POTS overlapped (F)
|
|
Bit 52-64: Reserved
|
|
Bit 65~71 (vdsl1 reserved)
|
|
Bit 72 : G.993.2 Annex A POTS (F)
|
|
Bit 73 : G.993.2 Annex A ISDN (F)
|
|
Bit 74 : G.993.2 Annex B POTS (F)
|
|
Bit 75 : G.993.2 Annex B ISDN (F)
|
|
Bit 76 : G.993.2 Annex C POTS (F)
|
|
Bit 77 : G.993.2 Annex C ISDN (F)
|
|
Bit 78~80 : Reserved
|
|
Bit 81 : G.9701 (F)
|
|
Bit 82-127: Reserved
|
|
"
|
|
SYNTAX BITS {
|
|
ansit1413(0),
|
|
etsi(1),
|
|
g9921PotsNonOverlapped(2),
|
|
g9921PotsOverlapped(3),
|
|
g9921IsdnNonOverlapped(4),
|
|
g9921isdnOverlapped(5),
|
|
g9921tcmIsdnNonOverlapped(6),
|
|
g9921tcmIsdnOverlapped(7),
|
|
g9922potsNonOverlapped(8),
|
|
g9922potsOverlapped(9),
|
|
g9922tcmIsdnNonOverlapped(10),
|
|
g9922tcmIsdnOverlapped(11),
|
|
g9921tcmIsdnSymmetric(12),
|
|
reserved1(13),
|
|
reserved2(14),
|
|
reserved3(15),
|
|
reserved4(16),
|
|
reserved5(17),
|
|
g9923PotsNonOverlapped(18),
|
|
g9923PotsOverlapped(19),
|
|
g9923IsdnNonOverlapped(20),
|
|
g9923isdnOverlapped(21),
|
|
reserved6(22),
|
|
reserved7(23),
|
|
g9924potsNonOverlapped(24),
|
|
g9924potsOverlapped(25),
|
|
reserved8(26),
|
|
reserved9(27),
|
|
g9923AnnexIAllDigNonOverlapped(28),
|
|
g9923AnnexIAllDigOverlapped(29),
|
|
g9923AnnexJAllDigNonOverlapped(30),
|
|
g9923AnnexJAllDigOverlapped(31),
|
|
g9924AnnexIAllDigNonOverlapped(32),
|
|
g9924AnnexIAllDigOverlapped(33),
|
|
g9923AnnexLMode1NonOverlapped(34),
|
|
g9923AnnexLMode2NonOverlapped(35),
|
|
g9923AnnexLMode3Overlapped(36),
|
|
g9923AnnexLMode4Overlapped(37),
|
|
g9923AnnexMPotsNonOverlapped(38),
|
|
g9923AnnexMPotsOverlapped(39),
|
|
g9925PotsNonOverlapped(40),
|
|
g9925PotsOverlapped(41),
|
|
g9925IsdnNonOverlapped(42),
|
|
g9925isdnOverlapped(43),
|
|
reserved10(44),
|
|
reserved11(45),
|
|
g9925AnnexIAllDigNonOverlapped(46),
|
|
g9925AnnexIAllDigOverlapped(47),
|
|
g9925AnnexJAllDigNonOverlapped(48),
|
|
g9925AnnexJAllDigOverlapped(49),
|
|
g9925AnnexMPotsNonOverlapped(50),
|
|
g9925AnnexMPotsOverlapped(51),
|
|
reserved12(52),
|
|
reserved13(53),
|
|
reserved14(54),
|
|
reserved15(55),
|
|
reserved16(56),
|
|
reserved17(57),
|
|
reserved18(58),
|
|
reserved19(59),
|
|
reserved20(60),
|
|
reserved21(61),
|
|
reserved22(62),
|
|
reserved23(63),
|
|
reserved24(64),
|
|
reserved25(65),
|
|
reserved26(66),
|
|
reserved27(67),
|
|
reserved28(68),
|
|
reserved29(69),
|
|
reserved30(70),
|
|
reserved31(71),
|
|
g9932AnnexAPots(72),
|
|
g9932AnnexAIsdn(73),
|
|
g9932AnnexBPots(74),
|
|
g9932AnnexBIsdn(75),
|
|
g9932AnnexCPots(76),
|
|
g9932AnnexCIsdn(77),
|
|
reserved32(78),
|
|
reserved33(79),
|
|
reserved34(80),
|
|
g9701(81),
|
|
reserved35(82),
|
|
reserved36(83),
|
|
reserved37(84),
|
|
reserved38(85),
|
|
reserved39(86),
|
|
reserved40(87),
|
|
reserved41(88),
|
|
reserved42(89),
|
|
reserved43(90),
|
|
reserved44(91),
|
|
reserved45(92),
|
|
reserved46(93),
|
|
reserved47(94),
|
|
reserved48(95),
|
|
reserved49(96),
|
|
reserved50(97),
|
|
reserved51(98),
|
|
reserved52(99),
|
|
reserved53(100),
|
|
reserved54(101),
|
|
reserved55(102),
|
|
reserved56(103),
|
|
reserved57(104),
|
|
reserved58(105),
|
|
reserved59(106),
|
|
reserved60(107),
|
|
reserved61(108),
|
|
reserved62(109),
|
|
reserved63(110),
|
|
reserved64(111),
|
|
reserved65(112),
|
|
reserved66(113),
|
|
reserved67(114),
|
|
reserved68(115),
|
|
reserved69(116),
|
|
reserved70(117),
|
|
reserved71(118),
|
|
reserved72(119),
|
|
reserved73(120),
|
|
reserved74(121),
|
|
reserved75(122),
|
|
reserved76(123),
|
|
reserved77(124),
|
|
reserved78(125),
|
|
reserved79(126),
|
|
reserved80(127)
|
|
}
|
|
|
|
Xdsl2LinePmMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects with this syntax are configuration parameters
|
|
that reference the power modes/states into which the xTU-C or
|
|
xTU-R may autonomously transit.
|
|
It is a BITS structure that allows control of the following
|
|
transit options:
|
|
1. allowTransitionsToIdle (0) - xTU may autonomously transit
|
|
to idle (L3) state.
|
|
2. allowTransitionsToLowPower (1)- xTU may autonomously transit
|
|
to low-power (L1/L2) state.
|
|
"
|
|
|
|
SYNTAX BITS {
|
|
allowTransitionsToIdle(0),
|
|
allowTransitionsToLowPower(1)
|
|
}
|
|
|
|
Xdsl2ScMaskDs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each one of the 512 bits in this OCTET STRING array represents
|
|
the corresponding subcarrier in the downstream direction.
|
|
A bit value of one indicates that a subcarrier is masked.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
|
|
Xdsl2ScMaskUs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each one of the 64 bits in this OCTET STRING array represents
|
|
the corresponding subcarrier in the upstream direction.
|
|
A bit value of one indicates that a subcarrier is masked.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
|
|
Xdsl2CarMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type defines an array of bands. Each band is represented
|
|
by 4 octets and there is a maximum of 32 bands allowed.
|
|
Each band consists of a 16 bit start subcarrier index followed by
|
|
a 16 bit stop subcarrier index.
|
|
Subcarrier index is an unsigned number in the range 0 to NSC-1.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
|
|
|
Xdsl2LineProfiles ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects with this syntax reference the list of ITU-T G.993.2 implementation profiles
|
|
supported by an xTU, enabled on the VDSL2 line or active on that line.
|
|
"
|
|
SYNTAX BITS {
|
|
profile8a(0),
|
|
profile8b(1),
|
|
profile8c(2),
|
|
profile8d(3),
|
|
profile12a(4),
|
|
profile12b(5),
|
|
profile17a(6),
|
|
profile30a(7),
|
|
--
|
|
profile35b(8),
|
|
reserved1(9),
|
|
reserved2(10),
|
|
reserved3(11),
|
|
reserved4(12),
|
|
reserved5(13),
|
|
reserved6(14),
|
|
reserved7(15),
|
|
--
|
|
reserved8(16),
|
|
reserved9(17),
|
|
reserved10(18),
|
|
reserved11(19),
|
|
reserved12(20),
|
|
reserved13(21),
|
|
reserved14(22),
|
|
reserved15(23),
|
|
--
|
|
reserved16(24),
|
|
reserved17(25),
|
|
reserved18(26),
|
|
reserved19(27),
|
|
reserved20(28),
|
|
reserved21(29),
|
|
reserved22(30),
|
|
reserved23(31)
|
|
}
|
|
|
|
Xdsl2LineUs0Mask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The US0 PSD masks to be allowed by the near-end xTU on the line.
|
|
This parameter is only defined for G.993.2 Annex A.
|
|
It is represented as a bitmap (0 if not allowed and 1 if allowed)
|
|
with the following definitions.
|
|
"
|
|
SYNTAX BITS {
|
|
eu32(0),
|
|
eu36(1),
|
|
eu40(2),
|
|
eu44(3),
|
|
eu48(4),
|
|
eu52(5),
|
|
eu56(6),
|
|
eu60(7),
|
|
--
|
|
eu64(8),
|
|
eu128(9),
|
|
reserved1(10),
|
|
reserved2(11),
|
|
reserved3(12),
|
|
reserved4(13),
|
|
reserved5(14),
|
|
reserved6(15),
|
|
--
|
|
adlu32(16),
|
|
adlu36(17),
|
|
adlu40(18),
|
|
adlu44(19),
|
|
adlu48(20),
|
|
adlu52(21),
|
|
adlu56(22),
|
|
adlu60(23),
|
|
--
|
|
adlu64(24),
|
|
adlu128(25),
|
|
reserved7(26),
|
|
reserved8(27),
|
|
reserved9(28),
|
|
reserved10(29),
|
|
reserved11(30),
|
|
reserved12(31)
|
|
}
|
|
|
|
|
|
Xdsl2LineCeFlag ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type is used to enable the use of the optional
|
|
cyclic extension values. If the bit is set to 1, the optional
|
|
cyclic extension values may be used. Otherwise, the cyclic
|
|
extension shall be forced to the mandatory length (5N/32).
|
|
Options:
|
|
1. enableCyclicExtension (0) - Enable use of optional Cyclic Extension values.
|
|
"
|
|
SYNTAX BITS {
|
|
enableCyclicExtension(0)
|
|
}
|
|
|
|
Xdsl2PsdMaskDs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to 32 PSD Mask breakpoints.
|
|
Each breakpoint occupies 3 octets:
|
|
The first two octets hold the index of the subcarrier associated with the breakpoint.
|
|
The third octet holds the PSD reduction at the breakpoint
|
|
from 0 (0dBm/Hz) to 255 (-127.5 dBm/Hz) using units of 0.5dBm/Hz.
|
|
Subcarrier index is an unsigned number in the range 0 to NSCds-1.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..96))
|
|
|
|
Xdsl2PsdMaskUs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to 16 PSD Mask breakpoints.
|
|
Each breakpoint occupies 3 octets:
|
|
The first two octets hold the index of the subcarrier associated with the breakpoint.
|
|
The third octet holds the PSD reduction at the breakpoint
|
|
from 0 (0dBm/Hz) to 255 (-127.5 dBm/Hz) using units of 0.5dBm/Hz.
|
|
Subcarrier index is an unsigned number in the range 0 to NSCus-1.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..48))
|
|
|
|
Xdsl2LinePsdMaskSelectUs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type is used to define which upstream PSD mask is enabled.
|
|
This type is used only for Annexes J and M of ITU-T Recs G.992.3 and G.992.5.
|
|
Options:
|
|
1. adlu32Eu32 (1) - ADLU-32 / EU-32
|
|
2. adlu36Eu36 (2) - ADLU-36 / EU-36
|
|
3. adlu40Eu40 (3) - ADLU-40 / EU-40
|
|
4. adlu44Eu44 (4) - ADLU-44 / EU-44
|
|
5. adlu48Eu48 (5) - ADLU-48 / EU-48
|
|
6. adlu52Eu52 (6) - ADLU-52 / EU-52
|
|
7. adlu56Eu56 (7) - ADLU-56 / EU-56
|
|
8. adlu60Eu60 (8) - ADLU-60 / EU-60
|
|
9. adlu64Eu64 (9) - ADLU-64 / EU-64
|
|
"
|
|
SYNTAX INTEGER {
|
|
adlu32Eu32(1),
|
|
adlu36Eu36(2),
|
|
adlu40Eu40(3),
|
|
adlu44Eu44(4),
|
|
adlu48Eu48(5),
|
|
adlu52Eu52(6),
|
|
adlu56Eu56(7),
|
|
adlu60Eu60(8),
|
|
adlu64Eu64(9)
|
|
}
|
|
|
|
Xdsl2LineLimitMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.993.2 limit PSD mask for each class of profile.
|
|
The profiles are grouped in following profile classes:
|
|
- Class 8: Profiles 8a, 8b, 8c, 8d
|
|
- Class 12: Profiles 12a, 12b
|
|
- Class 17: Profile 17a
|
|
- Class 30: Profile 30a
|
|
- Class 35: Profile 35b.
|
|
"
|
|
SYNTAX BITS {
|
|
profile8Limit1(0),
|
|
profile8Limit2(1),
|
|
profile8Limit3(2),
|
|
profile8Limit4(3),
|
|
profile8Limit5(4),
|
|
profile8Limit6(5),
|
|
profile8Limit7(6),
|
|
profile8Limit8(7),
|
|
profile8Limit9(8),
|
|
profile8Limit10(9),
|
|
profile8Limit11(10),
|
|
profile8Limit12(11),
|
|
profile8Limit13(12),
|
|
profile8Limit14(13),
|
|
profile8Limit15(14),
|
|
profile8Limit16(15),
|
|
--
|
|
profile12Limit1(16),
|
|
profile12Limit2(17),
|
|
profile12Limit3(18),
|
|
profile12Limit4(19),
|
|
profile12Limit5(20),
|
|
profile12Limit6(21),
|
|
profile12Limit7(22),
|
|
profile12Limit8(23),
|
|
profile12Limit9(24),
|
|
profile12Limit10(25),
|
|
profile12Limit11(26),
|
|
profile12Limit12(27),
|
|
profile12Limit13(28),
|
|
profile12Limit14(29),
|
|
profile12Limit15(30),
|
|
profile12Limit16(31),
|
|
--
|
|
profile17Limit1(32),
|
|
profile17Limit2(33),
|
|
profile17Limit3(34),
|
|
profile17Limit4(35),
|
|
profile17Limit5(36),
|
|
profile17Limit6(37),
|
|
profile17Limit7(38),
|
|
profile17Limit8(39),
|
|
profile17Limit9(40),
|
|
profile17Limit10(41),
|
|
profile17Limit11(42),
|
|
profile17Limit12(43),
|
|
profile17Limit13(44),
|
|
profile17Limit14(45),
|
|
profile17Limit15(46),
|
|
profile17Limit16(47),
|
|
--
|
|
profile30Limit1(48),
|
|
profile30Limit2(49),
|
|
profile30Limit3(50),
|
|
profile30Limit4(51),
|
|
profile30Limit5(52),
|
|
profile30Limit6(53),
|
|
profile30Limit7(54),
|
|
profile30Limit8(55),
|
|
profile30Limit9(56),
|
|
profile30Limit10(57),
|
|
profile30Limit11(58),
|
|
profile30Limit12(59),
|
|
profile30Limit13(60),
|
|
profile30Limit14(61),
|
|
profile30Limit15(62),
|
|
profile30Limit16(63),
|
|
--
|
|
profile35Limit1(64),
|
|
profile35Limit2(65),
|
|
profile35Limit3(66),
|
|
profile35Limit4(67),
|
|
profile35Limit5(68),
|
|
profile35Limit6(69),
|
|
profile35Limit7(70),
|
|
profile35Limit8(71),
|
|
profile35Limit9(72),
|
|
profile35Limit10(73),
|
|
profile35Limit11(74),
|
|
profile35Limit12(75),
|
|
profile35Limit13(76),
|
|
profile35Limit14(77),
|
|
profile35Limit15(78),
|
|
profile35Limit16(79)
|
|
}
|
|
|
|
Xdsl2LineUs0Disable ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if US0 is disabled for each limit PSD mask.
|
|
The profiles are grouped in following profile classes:
|
|
- Class 8: Profiles 8a, 8b, 8c, 8d
|
|
- Class 12: Profiles 12a, 12b
|
|
- Class 17: Profile 17a
|
|
- Class 30: Profile 30a
|
|
- Class 35: Profile 35b.
|
|
"
|
|
SYNTAX BITS {
|
|
profile8Us0Disable1(0),
|
|
profile8Us0Disable2(1),
|
|
profile8Us0Disable3(2),
|
|
profile8Us0Disable4(3),
|
|
profile8Us0Disable5(4),
|
|
profile8Us0Disable6(5),
|
|
profile8Us0Disable7(6),
|
|
profile8Us0Disable8(7),
|
|
profile8Us0Disable9(8),
|
|
profile8Us0Disable10(9),
|
|
profile8Us0Disable11(10),
|
|
profile8Us0Disable12(11),
|
|
profile8Us0Disable13(12),
|
|
profile8Us0Disable14(13),
|
|
profile8Us0Disable15(14),
|
|
profile8Us0Disable16(15),
|
|
profile12Us0Disable1(16),
|
|
profile12Us0Disable2(17),
|
|
profile12Us0Disable3(18),
|
|
profile12Us0Disable4(19),
|
|
profile12Us0Disable5(20),
|
|
profile12Us0Disable6(21),
|
|
profile12Us0Disable7(22),
|
|
profile12Us0Disable8(23),
|
|
profile12Us0Disable9(24),
|
|
profile12Us0Disable10(25),
|
|
profile12Us0Disable11(26),
|
|
profile12Us0Disable12(27),
|
|
profile12Us0Disable13(28),
|
|
profile12Us0Disable14(29),
|
|
profile12Us0Disable15(30),
|
|
profile12Us0Disable16(31),
|
|
profile17Us0Disable1(32),
|
|
profile17Us0Disable2(33),
|
|
profile17Us0Disable3(34),
|
|
profile17Us0Disable4(35),
|
|
profile17Us0Disable5(36),
|
|
profile17Us0Disable6(37),
|
|
profile17Us0Disable7(38),
|
|
profile17Us0Disable8(39),
|
|
profile17Us0Disable9(40),
|
|
profile17Us0Disable10(41),
|
|
profile17Us0Disable11(42),
|
|
profile17Us0Disable12(43),
|
|
profile17Us0Disable13(44),
|
|
profile17Us0Disable14(45),
|
|
profile17Us0Disable15(46),
|
|
profile17Us0Disable16(47),
|
|
profile30Us0Disable1(48),
|
|
profile30Us0Disable2(49),
|
|
profile30Us0Disable3(50),
|
|
profile30Us0Disable4(51),
|
|
profile30Us0Disable5(52),
|
|
profile30Us0Disable6(53),
|
|
profile30Us0Disable7(54),
|
|
profile30Us0Disable8(55),
|
|
profile30Us0Disable9(56),
|
|
profile30Us0Disable10(57),
|
|
profile30Us0Disable11(58),
|
|
profile30Us0Disable12(59),
|
|
profile30Us0Disable13(60),
|
|
profile30Us0Disable14(61),
|
|
profile30Us0Disable15(62),
|
|
profile30Us0Disable16(63),
|
|
profile35Us0Disable1(64),
|
|
profile35Us0Disable2(65),
|
|
profile35Us0Disable3(66),
|
|
profile35Us0Disable4(67),
|
|
profile35Us0Disable5(68),
|
|
profile35Us0Disable6(69),
|
|
profile35Us0Disable7(70),
|
|
profile35Us0Disable8(71),
|
|
profile35Us0Disable9(72),
|
|
profile35Us0Disable10(73),
|
|
profile35Us0Disable11(74),
|
|
profile35Us0Disable12(75),
|
|
profile35Us0Disable13(76),
|
|
profile35Us0Disable14(77),
|
|
profile35Us0Disable15(78),
|
|
profile35Us0Disable16(79)
|
|
}
|
|
|
|
Xdsl2LineClassMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VDSL2 PSD Mask Class.
|
|
The limit Power Spectral Density masks are grouped in
|
|
the following PSD mask classes:
|
|
Class 998 Annex A: D-32, D-48, D-64, D-128.
|
|
Class 997-M1c Annex B: 997-M1c-A-7.
|
|
Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M.
|
|
Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M,
|
|
997E17-M2x-NUS0, 997E30-M2x-NUS0.
|
|
Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0.
|
|
Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B,
|
|
998-M2x-NUS0, 998E17-M2x-NUS0,
|
|
998E17-M2x-NUS0-M, 998E17-M2x-A,
|
|
998E30-M2x-NUS0, 998E30-M2x-NUS0-M.
|
|
Class 998ADE-M2x Annex B: Annex B: 998-M2x-A, 998-M2x-M,
|
|
998-M2x-B, 998-M2x-NUS0,
|
|
998ADE17-M2x-A, 998ADE17-M2x-B,
|
|
998ADE17-M2x-NUS0-M,
|
|
998ADE17-SPE-M2x-A,
|
|
998ADE30-M2x-NUS0-A,
|
|
998ADE30-M2x-NUS0-M.
|
|
Class 998-B Annex C: POTS-138b, POTS-276b per C.2.1.1
|
|
in G.993.2, TCM-ISDN per C.2.1.2
|
|
in G.993.2.
|
|
Class 998-CO Annex C: POTS-138co, POTS-276co per C.2.1.1
|
|
in G.993.2.
|
|
Class HPE-M1 Annex B: HPE17-M1-NUS0, HPE30-M1-NUS0.
|
|
Class 998E35-M2X Annex B: E35-M2x-A.
|
|
Class 998ADE35-M2x Annex B: ADE35-M2x-A, ADE35-M2x-B, ADE35-M2x-M.
|
|
"
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
a998ORb997M1cORc998B(2),
|
|
b997M1xOR998co(3),
|
|
b997M2x(4),
|
|
b998M1x(5),
|
|
b998M2x(6),
|
|
b998AdeM2x(7),
|
|
bHpeM1(8),
|
|
b998E35M2x(9),
|
|
b998Ade35M2x(10)
|
|
}
|
|
|
|
Xdsl2UpboKLF ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the upstream power backoff force mode (UPBOKLF).
|
|
Options:
|
|
1. auto(1) - The VTUs will autonomously determine the
|
|
electrical length.
|
|
2. override(2) - Forces the VTU-R to use the electrical
|
|
length, kl0, of the CO-MIB (UPBOKL) to
|
|
compute the UPBO.
|
|
3. disableUpbo(3) - Disables UPBO such that UPBO is not
|
|
utilized.
|
|
"
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
override(2),
|
|
disableUpbo(3)
|
|
}
|
|
|
|
Xdsl2BandUs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each value identifies a specific band in the upstream
|
|
transmission direction (Excluding US0 band.).
|
|
The possible values which identify a band are as follows:
|
|
1. us1(5) - Upstream band number 1 (US1).
|
|
2. us2(7) - Upstream band number 2 (US2).
|
|
3. us3(9) - Upstream band number 3 (US3).
|
|
4. us4(11) - Upstream band number 4 (US4).
|
|
"
|
|
SYNTAX INTEGER {
|
|
us1(5),
|
|
us2(7),
|
|
us3(9),
|
|
us4(11)
|
|
}
|
|
|
|
Xdsl2RfiBands ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type defines a subset of downstream PSD mask breakpoints used to
|
|
notch radio frequency interference (RFI) bands.
|
|
Each RFI band is represented by 4 octets:
|
|
16 bit start subcarrier index followed by a 16 bit stop subcarrier index.
|
|
There is a maximum of 64 RFI bands allowed.
|
|
Subcarrier index is an unsigned number in the range 0 to NSC-1.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
|
|
Xdsl2LineSnrMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type is used to enable the transmitter referred virtual noise.
|
|
Options:
|
|
1. virtualNoiseDisabled (1) - Virtual noise is disabled.
|
|
2. virtualNoiseEnabled (2) - Virtual noise is enabled.
|
|
"
|
|
SYNTAX INTEGER {
|
|
virtualNoiseDisabled(1),
|
|
virtualNoiseEnabled(2)
|
|
}
|
|
|
|
Xdsl2RaMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the rate adaptation behavior for the line.
|
|
Options:
|
|
1. manual (1) - No Rate-Adaptation. The initialization process
|
|
attempts to synchronize to a specified rate.
|
|
2. raInit (2) - Rate-Adaptation during initialization process only,
|
|
which attempts to synchronize to a rate between minimum
|
|
and maximum specified values.
|
|
3. dynamicRa (3) - Dynamic Rate-Adaptation during initialization process
|
|
as well as during Showtime.
|
|
4. dynamicwithsos(4)- Rate-Adaptation during show time by SOS and SRA.
|
|
In this mode, enabling of SOS and SRA is mandatory.
|
|
|
|
"
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
raInit(2),
|
|
dynamicRa(3),
|
|
dynamicwithsos(4)
|
|
}
|
|
|
|
Xdsl2SymbolProtection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type specifies the minimum impulse noise protection for the bearer channel
|
|
if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz.
|
|
The possible values are:
|
|
'noProtection' (i.e., INP not required), 'halfSymbol' (i.e., INP
|
|
length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol.
|
|
"
|
|
SYNTAX INTEGER {
|
|
noProtection (1),
|
|
halfSymbol (2),
|
|
singleSymbol (3),
|
|
twoSymbols (4),
|
|
threeSymbols (5),
|
|
fourSymbols (6),
|
|
fiveSymbols (7),
|
|
sixSymbols (8),
|
|
sevenSymbols (9),
|
|
eightSymbols (10),
|
|
nineSymbols (11),
|
|
tenSymbols (12),
|
|
elevenSymbols (13),
|
|
twelveSymbols (14),
|
|
thirteeSymbols (15),
|
|
fourteenSymbols (16),
|
|
fifteenSymbols (17),
|
|
sixteenSymbols (18)
|
|
}
|
|
|
|
Xdsl2SymbolProtection8 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type specifies the minimum impulse noise protection
|
|
for the bearer channel if it is transported over DMT symbols
|
|
with a subcarrier spacing of 8.625 kHz.
|
|
The possible values are:
|
|
'noProtection' (i.e., INP not required) and 1-16 symbols in
|
|
steps of 1 symbol.
|
|
"
|
|
SYNTAX INTEGER {
|
|
noProtection (1),
|
|
singleSymbol (2),
|
|
twoSymbols (3),
|
|
threeSymbols (4),
|
|
fourSymbols (5),
|
|
fiveSymbols (6),
|
|
sixSymbols (7),
|
|
sevenSymbols (8),
|
|
eightSymbols (9),
|
|
nineSymbols (10),
|
|
tenSymbols (11),
|
|
elevenSymbols (12),
|
|
twelveSymbols (13),
|
|
thirteeSymbols (14),
|
|
fourteenSymbols (15),
|
|
fifteenSymbols (16),
|
|
sixteenSymbols (17)
|
|
}
|
|
|
|
Xdsl2ChInitPolicy ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This syntax serves for channel configuration parameters
|
|
that reference the channel initialization policy.
|
|
Options:
|
|
1. policy0 (1) - Policy 0 according to the applicable standard
|
|
2. policy1 (2) - Policy 1 according to the applicable standard
|
|
3. policy2 (3) - Policy 2 according to the applicable standard
|
|
"
|
|
SYNTAX INTEGER {
|
|
policy0(1),
|
|
policy1(2),
|
|
policy2(3)
|
|
}
|
|
|
|
Xdsl2LineTxRefVnDs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to 32 PSD Mask breakpoints.
|
|
Each breakpoint occupies 3 octets:
|
|
The first two octets hold the index of the subcarrier associated with the breakpoint.
|
|
The third octet holds the PSD reduction at the breakpoint from 0 (-140 dBm/Hz)
|
|
to 200 (-40 dBm/Hz) using units of 0.5dBm/Hz.
|
|
A special value of 255 indicates a noise level of 0 W/Hz.
|
|
Subcarrier index is an unsigned number in the range 0 to NSCds-1.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..96))
|
|
|
|
Xdsl2LineTxRefVnUs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to 16 PSD Mask breakpoints.
|
|
Each breakpoint occupies 3 octets:
|
|
The first two octets hold the index of the subcarrier associated with the breakpoint.
|
|
The third octet holds the PSD reduction at the breakpoint from 0 (-140 dBm/Hz)
|
|
to 200 (-40 dBm/Hz) using units of 0.5dBm/Hz.
|
|
A special value of 255 indicates a noise level of 0 W/Hz.
|
|
Subcarrier index is an unsigned number in the range 0 to NSCus-1.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..48))
|
|
|
|
Xdsl2DataPathMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel data path mode:
|
|
Options:
|
|
1. atm (1) - Indicates the channel data path mode is ATM
|
|
2. ptm (2) - Indicates the channel data path mode is PTM
|
|
3. both (3) - Indicates both ATM and PTM data path mode are supported
|
|
"
|
|
SYNTAX INTEGER {
|
|
atm(1),
|
|
ptm(2),
|
|
both(3)
|
|
}
|
|
|
|
Xdsl2LineClockReferenceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The various clock references for the xDSL line, represented as an enumeration.
|
|
Options:
|
|
1. freeRun(1) - Clock references for the xDSL line is freeRun
|
|
2. system(2) - Clock references for the xDSL line is system
|
|
"
|
|
SYNTAX INTEGER {
|
|
freeRun(1),
|
|
system(2)
|
|
}
|
|
|
|
Xdsl2BitSwap ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bit swap upstream or downstream of a line.
|
|
Options:
|
|
1. disable (1) - Disable the bit swap upstream or downstream of a line.
|
|
2. enable (2) - Enable the bit swap upstream or downstream of a line.
|
|
"
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
|
|
Xdsl2UpboBoostMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Equalized FEXT UPBO method.
|
|
Options:
|
|
1.disable(1) - The Equalized FEXT UPBO method is not supported.
|
|
2.enable(2) - The Equalized FEXT UPBO method is supported.
|
|
"
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
|
|
HWVOPProfileIndexOrZeroType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type should be used as index parameter for vop profiles.
|
|
0 is a special value, which could only be used for profile assignment parameters
|
|
in case of optional profiles and is not a valid profile index inside profile tables.
|
|
A maximum number of valid profile indices will be set to vendor-specific value,
|
|
unless otherwise specified in this document.
|
|
"
|
|
SYNTAX Unsigned32 (0 | 1..4294967295)
|
|
|
|
HWVOPSetupIndexOrZeroType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type should be used as index parameter for Vector Of Profiles (VoP) setup
|
|
table (hwVOPSetupTable), when rows in that table are created by the management system.
|
|
0 is a special value, which is not a valid VoP setup index and serves solely as an indication,
|
|
e.g., may mark a situation in which no more rows can be supported in that table.
|
|
A maximum number of valid indices will be set to vendor-specific value,
|
|
unless otherwise specified in this document.
|
|
"
|
|
SYNTAX Unsigned32 (0 | 1..4294967295)
|
|
|
|
HWVOPAttachmentMethods ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type should be used for objects that refer to methods of attaching
|
|
Vector Of configuration Profiles (VoP) to xDSL lines.
|
|
Two attachment methods are available.
|
|
The 'direct' method is associating each xDSL line with a dedicated VoP instance.
|
|
The 'indirect' method is creating a pool of VoP instances and associating each
|
|
xDSL line with one of the VoP instances in that pool. In 'indirect' attachment-method
|
|
associating an xDSL line with a VoP instance is performed by setting the
|
|
xdsl2LineConfTemplate object (VDSL2-LINE-MIB) of the related line to the identifier
|
|
of that VoP. The VoP instance currently used by the xDSL line is provided
|
|
by the xdsl2LineStatusActTemplate object (VDSL2-LINE-MIB) of the respective line.
|
|
The two objects mentioned above are unused in 'direct' attachment-method.
|
|
"
|
|
SYNTAX BITS
|
|
{
|
|
direct(0),
|
|
indirect(1)
|
|
}
|
|
|
|
HWVOPGfastProfiles ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type defines for each profile whether operation according to that profile is allowed or disallowed.
|
|
It is represented as a bitmap (0 if not allowed and 1 if allowed)with the following definitions.
|
|
"
|
|
SYNTAX BITS {
|
|
fastProfile106(0),
|
|
fastProfile212(1)
|
|
}
|
|
|
|
HWVOPGfastIarBands ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This type defines each International Amateur Radio (IAR) band whether transmit PSD reduction
|
|
is enabled or disabled in that band.
|
|
It is represented as a bitmap (0 if not allowed and 1 if allowed)with the following definitions.
|
|
"
|
|
SYNTAX BITS {
|
|
iarBand1800To2000(0),
|
|
iarBand3500To4000(1),
|
|
iarBand7000To7300(2),
|
|
iarBand10100To10150(3),
|
|
iarBand14000To14350(4),
|
|
iarBand18068To18168(5),
|
|
iarBand21000To21450(6),
|
|
iarBand24890To24990(7),
|
|
iarBand28000To29700(8),
|
|
iarBand50000To54000(9),
|
|
iarBand70000To70500(10),
|
|
iarBand144000To148000(11)
|
|
}
|
|
|
|
HWVOPGfastRaMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the rate adaptation behavior for the line.
|
|
Options:
|
|
1. manual (1) - No Rate-Adaptation. The initialization process
|
|
attempts to synchronize to a specified rate.
|
|
2. raInit (2) - Rate-Adaptation during initialization process only,
|
|
which attempts to synchronize to a rate between minimum
|
|
and maximum specified values.
|
|
3. dynamicRa (3) - Dynamic Rate-Adaptation during initialization process
|
|
as well as during Showtime.
|
|
4. dynamicwithfra(4)- Rate-Adaptation during show time by FRA and SRA.
|
|
In this mode, enabling of FRA and SRA is mandatory.
|
|
|
|
"
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
raInit(2),
|
|
dynamicRa(3),
|
|
dynamicwithfra(4)
|
|
}
|
|
|
|
HWVOPGfastPsdMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to 32 PSD Mask breakpoints.
|
|
Each breakpoint occupies 3 octets:
|
|
The first two octets hold the index of the subcarrier associated with the breakpoint.
|
|
The third octet holds the PSD reduction at the breakpoint
|
|
from 0 (0dBm/Hz) to 255 (-127.5 dBm/Hz) using units of 0.5dBm/Hz.
|
|
Subcarrier index is an unsigned number in the range 0 to NSCds-1.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE(0..96))
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
-- [MF] Needs to be switched to official IANA branch when approved by IETF
|
|
--
|
|
|
|
hwVOPConformance OBJECT IDENTIFIER ::= { hwVOPGlobalModule 2 }
|
|
|
|
hwVOPTraps OBJECT IDENTIFIER ::= { hwVOPGlobalModule 3 }
|
|
|
|
hwVOPCommonTraps OBJECT IDENTIFIER ::= { hwVOPTraps 1 }
|
|
|
|
hwVOPXdslPortTraps OBJECT IDENTIFIER ::= { hwVOPCommonTraps 1 }
|
|
|
|
hwVOPAlarmTraps OBJECT IDENTIFIER ::= { hwVOPTraps 2 }
|
|
|
|
hwVOPGroups OBJECT IDENTIFIER ::= { hwVOPConformance 1 }
|
|
|
|
hwVOPObjects OBJECT IDENTIFIER ::= { hwVOPGlobalModule 1 }
|
|
|
|
hwVOPProfiles OBJECT IDENTIFIER ::= { hwVOPObjects 1 }
|
|
|
|
|
|
hwVOPDataRateProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPDataRateConfProfIndex
|
|
when creating entries in the hwVOPDataRateConfProfTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
|
|
To obtain the value of hwVOPDataRateConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be
|
|
made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 1 }
|
|
|
|
hwVOPDataRateConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPDataRateConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPDataRateConfProfTable contains data rate configuration parameters
|
|
for the DSL channel(s).
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
|
|
Two default profiles with index numbers 1 and 2 will always exist and its parameters
|
|
will be set to vendor-specific values, unless otherwise specified in this document
|
|
The index of this table is hwVOPDataRateConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.5"
|
|
::= { hwVOPProfiles 2 }
|
|
|
|
|
|
hwVOPDataRateConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPDataRateConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPDataRateConfProfTable contains data rate configuration parameters
|
|
for the DSL channel(s).
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
|
|
Two default profiles with index numbers 1 and 2 will always exist and its parameters
|
|
will be set to vendor-specific values, unless otherwise specified in this document
|
|
The index of this entry is hwVOPDataRateConfProfIndex.
|
|
"
|
|
INDEX { hwVOPDataRateConfProfIndex }
|
|
::= { hwVOPDataRateConfProfTable 1 }
|
|
|
|
|
|
HWVOPDataRateConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPDataRateConfProfIndex Unsigned32,
|
|
hwVOPDataRateConfProfRowStatus RowStatus,
|
|
hwVOPDataRateConfProfDescription OCTET STRING,
|
|
hwVOPDataRateConfProfMinDataRate Gauge32,
|
|
hwVOPDataRateConfProfMinResDataRate Gauge32,
|
|
hwVOPDataRateConfProfMaxDataRate Gauge32,
|
|
hwVOPDataRateConfProfMinDataRateLowPwr Gauge32,
|
|
hwVOPDataRateConfProfMaxBer Xdsl2MaxBer,
|
|
hwVOPDataRateConfProfUsDataRate Gauge32,
|
|
hwVOPDataRateConfProfDsDataRate Gauge32,
|
|
hwVOPDataRateConfProfDataPathMode Xdsl2DataPathMode,
|
|
hwVOPDataRateConfProfMinEtrRtx Gauge32,
|
|
hwVOPDataRateConfProfMaxEtrRtx Gauge32,
|
|
hwVOPDataRateConfProfMaxNdrRtx Gauge32,
|
|
hwVOPDataRateConfProfMaxDataRateLowPwr Gauge32,
|
|
hwVOPDataRateConfProfL2MinDataRateToL0ActDataRate Gauge32,
|
|
hwVOPDataRateConfProfMinSosBr Unsigned32,
|
|
hwVOPGfastDataRateConfProfMinEtr Gauge32,
|
|
hwVOPGfastDataRateConfProfMaxEtr Gauge32,
|
|
hwVOPGfastDataRateConfProfMaxNdr Gauge32,
|
|
hwVOPGfastDataRateConfProfUsDataRate Gauge32,
|
|
hwVOPGfastDataRateConfProfDsDataRate Gauge32
|
|
}
|
|
|
|
|
|
hwVOPDataRateConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPDataRateConfProfIndex identifies a row in the hwVOPDataRateConfProfTable."
|
|
::= { hwVOPDataRateConfProfEntry 1 }
|
|
|
|
|
|
hwVOPDataRateConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPDataRateConfProfRowStatus is used to create a new row or to modify
|
|
or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to
|
|
'destroy' or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
|
|
A row in hwVOPDataRateConfProfTable is said to be unreferenced
|
|
when there is no instance of hwVOPActSetupUsDataRateProfId1-4 and
|
|
hwVOPActSetupDsDataRateProfId1-4 in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPDataRateConfProfEntry 2 }
|
|
|
|
|
|
hwVOPDataRateConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPDataRateConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPDataRateConfProfEntry 3 }
|
|
|
|
|
|
hwVOPDataRateConfProfMinDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in a given transmit direction,this parameter specifics
|
|
minimum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s."
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.1.1 (Minimum data rate)
|
|
Unit: bit/s.
|
|
"
|
|
::= { hwVOPDataRateConfProfEntry 4 }
|
|
|
|
|
|
hwVOPDataRateConfProfMinResDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum reserved net data rate for the bearer channel, coded in bit/s.
|
|
This parameter is only used if the Rate Adaptation Mode in the direction
|
|
of the bearer channel (i.e., xdsl2LConfProfRaModeDs) is set to dynamicRa.
|
|
Unit: bit/s.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.1.2 (Minimum reserved data rate)"
|
|
::= { hwVOPDataRateConfProfEntry 5 }
|
|
|
|
|
|
hwVOPDataRateConfProfMaxDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in a given transmit direction,this parameter specifics
|
|
maximum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s."
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.1.3 (Maximum data rate)
|
|
Unit: bit/s.
|
|
"
|
|
::= { hwVOPDataRateConfProfEntry 6 }
|
|
|
|
|
|
hwVOPDataRateConfProfMinDataRateLowPwr OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the minimum net data rate for the bearer channel
|
|
as desired by the operator of the system during the low power state (L1/L2).
|
|
The power management low power states L1 and L2 are defined in ITU-T Recs
|
|
G.992.2 and G.992.3 respectively.
|
|
The data rate is coded in steps of bit/s.
|
|
Unit: bit/s.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.1.5 (Minimum Data Rate in low power state)"
|
|
::= { hwVOPDataRateConfProfEntry 7 }
|
|
|
|
|
|
hwVOPDataRateConfProfMaxBer OBJECT-TYPE
|
|
SYNTAX Xdsl2MaxBer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum Bit Error Ratio of the bearer channel."
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.6 (Maximum bit error ratio)"
|
|
DEFVAL { eminus5 }
|
|
::= { hwVOPDataRateConfProfEntry 8 }
|
|
|
|
|
|
hwVOPDataRateConfProfUsDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in a given transmit direction, This parameter is
|
|
a threshold on the net data rate upshift achieved over one or more bearer channel data
|
|
rate adaptations. An upshift rate change alarm (event) is triggered when the actual
|
|
data rate exceeds the data rate at the last entry into showtime by more than the threshold.
|
|
The data rate threshold is coded in bit/s.
|
|
Unit: bit/s.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.8.1 (Data rate threshold upshift)"
|
|
::= { hwVOPDataRateConfProfEntry 9 }
|
|
|
|
|
|
hwVOPDataRateConfProfDsDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in a given transmit direction, This parameter is
|
|
a threshold on the net data rate downshift achieved over one or more bearer channel data
|
|
rate adaptations. A downshift rate change alarm (event) is triggered when the actual
|
|
data rate is below the data rate at the last entry into showtime by more than the threshold.
|
|
The data rate threshold is coded in bit/s.
|
|
Unit: bit/s.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.8.2 (Data rate threshold downshift)"
|
|
::= { hwVOPDataRateConfProfEntry 10 }
|
|
|
|
|
|
hwVOPDataRateConfProfDataPathMode OBJECT-TYPE
|
|
SYNTAX Xdsl2DataPathMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channel data path mode."
|
|
DEFVAL { both }
|
|
::= { hwVOPDataRateConfProfEntry 11 }
|
|
|
|
hwVOPDataRateConfProfMinEtrRtx OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in a given transmit direction, this parameter specifies the
|
|
minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
|
|
Unit: bit/s
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.8"
|
|
::= { hwVOPDataRateConfProfEntry 12 }
|
|
|
|
hwVOPDataRateConfProfMaxEtrRtx OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in a given transmit direction, this parameter specifies the
|
|
maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
|
|
Unit: bit/s
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.9"
|
|
::= { hwVOPDataRateConfProfEntry 13 }
|
|
|
|
hwVOPDataRateConfProfMaxNdrRtx OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in a given transmit direction, this parameter specifies the
|
|
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.
|
|
Unit: bit/s
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.10"
|
|
::= { hwVOPDataRateConfProfEntry 14 }
|
|
|
|
hwVOPDataRateConfProfMaxDataRateLowPwr OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..500000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum Data Rate in Low Power state.
|
|
Unit: bits/second
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
|
|
::= { hwVOPDataRateConfProfEntry 15 }
|
|
|
|
hwVOPDataRateConfProfL2MinDataRateToL0ActDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32(0..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ratio between data rate in low power state and data rate in normal state.
|
|
"
|
|
::= { hwVOPDataRateConfProfEntry 16 }
|
|
|
|
hwVOPDataRateConfProfMinSosBr OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..65535)
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the minimum net data rate required for a valid SOS request.
|
|
The valid range of values is from 0 to 65535 Kbps.
|
|
Unit: Kbps
|
|
"
|
|
::= { hwVOPDataRateConfProfEntry 17 }
|
|
|
|
hwVOPGfastDataRateConfProfMinEtr OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..2000000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the minimum expected throughput for the bearer channel.
|
|
The values range in steps of 1000 bit/s.
|
|
Unit: bit/s
|
|
"
|
|
DEFVAL { 32000 }
|
|
::= { hwVOPDataRateConfProfEntry 18 }
|
|
|
|
hwVOPGfastDataRateConfProfMaxEtr OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..2000000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast maximum expected throughput for the bearer channel.
|
|
The values range in steps of 1000 bit/s.
|
|
Unit: bit/s
|
|
"
|
|
DEFVAL { 2000000000 }
|
|
::= { hwVOPDataRateConfProfEntry 19 }
|
|
|
|
hwVOPGfastDataRateConfProfMaxNdr OBJECT-TYPE
|
|
SYNTAX Gauge32 (32000..2000000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast maximum net data rate for the bearer channel.
|
|
The values range in steps of 1000 bit/s.
|
|
Unit: bit/s
|
|
"
|
|
DEFVAL { 2000000000 }
|
|
::= { hwVOPDataRateConfProfEntry 20 }
|
|
|
|
hwVOPGfastDataRateConfProfUsDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..2000000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is a threshold on the G.fast net data rate upshift achieved over one or more
|
|
bearer channel data rate adaptations. An upshift rate change alarm (event) is triggered when
|
|
the actual data rate exceeds the data rate at the last entry into showtime by more than the
|
|
threshold.
|
|
The data rate threshold is coded in bit/s.
|
|
Unit: bit/s.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPDataRateConfProfEntry 21 }
|
|
|
|
|
|
hwVOPGfastDataRateConfProfDsDataRate OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..2000000000)
|
|
UNITS "bit/s"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is a threshold on the G.fast net data rate downshift achieved over one or more
|
|
bearer channel data rate adaptations. A downshift rate change alarm (event) is triggered when
|
|
the actual data rate is below the data rate at the last entry into showtime by more than the
|
|
threshold.
|
|
The data rate threshold is coded in bit/s.
|
|
Unit: bit/s.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPDataRateConfProfEntry 22 }
|
|
|
|
hwVOPLineSpectrumProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPLineSpectrumConfProfIndex
|
|
when creating entries in the hwVOPLineSpectrumConfProfTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
|
|
To obtain the value of hwVOPLineSpectrumConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy
|
|
when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 3 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPLineSpectrumConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
|
|
during the service delivery phase, independently for upstream and downstream.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
|
|
A default profile with an index of '1' will always exist and its parameters will be set
|
|
to vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPLineSpectrumConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.6"
|
|
::= { hwVOPProfiles 4 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPLineSpectrumConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
|
|
during the service delivery phase, independently for upstream and downstream.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
|
|
A default profile with an index of '1' will always exist and its parameters will be set
|
|
to vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPLineSpectrumConfProfIndex.
|
|
"
|
|
INDEX { hwVOPLineSpectrumConfProfIndex }
|
|
::= { hwVOPLineSpectrumConfProfTable 1 }
|
|
|
|
|
|
HWVOPLineSpectrumConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPLineSpectrumConfProfIndex Unsigned32,
|
|
hwVOPLineSpectrumConfProfRowStatus RowStatus,
|
|
hwVOPLineSpectrumConfProfDescription OCTET STRING,
|
|
hwVOPLineSpectrumConfProfXtuTransSysEna Xdsl2TransmissionModeType,
|
|
hwVOPLineSpectrumConfProfPmMode Xdsl2LinePmMode,
|
|
hwVOPLineSpectrumConfProfL0Time Gauge32,
|
|
hwVOPLineSpectrumConfProfL2Time Gauge32,
|
|
hwVOPLineSpectrumConfProfL3Time Gauge32,
|
|
hwVOPLineSpectrumConfProfL2Atpr Gauge32,
|
|
hwVOPLineSpectrumConfProfL2Atprt Gauge32,
|
|
hwVOPLineSpectrumConfProfReferenceClock Xdsl2LineClockReferenceType,
|
|
hwVOPLineSpectrumConfProfBitSwapDs Xdsl2BitSwap,
|
|
hwVOPLineSpectrumConfProfBitSwapUs Xdsl2BitSwap,
|
|
hwVOPLineSpectrumConfProfScMaskDs Xdsl2ScMaskDs,
|
|
hwVOPLineSpectrumConfProfScMaskUs Xdsl2ScMaskUs,
|
|
hwVOPLineSpectrumConfProfVdsl2CarMask Xdsl2CarMask,
|
|
hwVOPLineSpectrumConfProfMsgMinUs Gauge32,
|
|
hwVOPLineSpectrumConfProfMsgMinDs Gauge32,
|
|
hwVOPLineSpectrumConfProfProfiles Xdsl2LineProfiles,
|
|
hwVOPLineSpectrumConfProfUs0Mask Xdsl2LineUs0Mask,
|
|
hwVOPLineSpectrumConfProfCeFlag Xdsl2LineCeFlag,
|
|
hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed OCTET STRING,
|
|
hwVOPLineSpectrumConfProfForceInpDs TruthValue,
|
|
hwVOPLineSpectrumConfProfForceInpUs TruthValue,
|
|
hwVOPLineSpectrumConfProfRtxModeDs INTEGER,
|
|
hwVOPLineSpectrumConfProfRtxModeUs INTEGER,
|
|
hwVOPLineSpectrumConfProfLeftrThreshDs Gauge32,
|
|
hwVOPLineSpectrumConfProfLeftrThreshUs Gauge32,
|
|
hwVOPGfastLineSpectrumConfProfGfastProfiles HWVOPGfastProfiles,
|
|
hwVOPGfastLineSpectrumConfProfLowFreqEdgeValue Gauge32,
|
|
hwVOPGfastLineSpectrumConfProfGfastCarMaskDs Xdsl2CarMask,
|
|
hwVOPGfastLineSpectrumConfProfGfastCarMaskUs Xdsl2CarMask
|
|
}
|
|
|
|
|
|
hwVOPLineSpectrumConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPLineSpectrumConfProfIndex identifies a row in the hwVOPLineSpectrumConfProfTable."
|
|
::= { hwVOPLineSpectrumConfProfEntry 1 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPLineSpectrumConfProfRowStatus is used to create a new row
|
|
or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object
|
|
to 'destroy' or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
|
|
A row in hwVOPLineSpectrumConfProfTable is said to be not referenced when there is no instance
|
|
of hwVOPActSetupLSpectrumProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPLineSpectrumConfProfEntry 2 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPLineSpectrumConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPLineSpectrumConfProfEntry 3 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfXtuTransSysEna OBJECT-TYPE
|
|
SYNTAX Xdsl2TransmissionModeType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"xTU Transmission System Enabling (XTSE).
|
|
A list of the different coding types enabled in this profile.
|
|
It is coded in a bit-map representation with 1 or more bits set.
|
|
A bit set to '1' means that the xTUs may apply the respective coding for the DSL line.
|
|
A bit set to '0' means that the xTUs cannot apply the respective coding for the xDSL line.
|
|
All 'reserved' bits should be set to '0'.
|
|
"
|
|
::= { hwVOPLineSpectrumConfProfEntry 4 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfPmMode OBJECT-TYPE
|
|
SYNTAX Xdsl2LinePmMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power management state Enabling (PMMode).
|
|
Defines the power states the xTU-C or xTU-R may autonomously transition to on this line.
|
|
This is a set of bits, where any bit with a '1' value means that the xTU is allowed
|
|
to transit into the respective state and any bit with a '0' value means
|
|
that the xTU is not allowed to transit into the respective state.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.1.4 (PMMode)"
|
|
::= { hwVOPLineSpectrumConfProfEntry 5 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfL0Time OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time (in seconds) between an Exit from the L2 state
|
|
and the next Entry into the L2 state.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.1.5 (L0-TIME)"
|
|
DEFVAL { 255 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 6 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfL2Time OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time (in seconds) between an Entry into the L2 state
|
|
and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State.
|
|
Unit: seconds
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.1.6 (L2-TIME)"
|
|
DEFVAL { 30 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 7 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfL3Time OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state.
|
|
Unit: seconds
|
|
"
|
|
DEFVAL { 255 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 8 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfL2Atpr OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..31)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum aggregate transmit power reduction (in dB) that can be performed at transition
|
|
of L0 to L2 state or through a single Power Trim in the L2 state.
|
|
Unit: dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.1.7 (L2-ATPR)"
|
|
DEFVAL { 3 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 9 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfL2Atprt OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..31)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total maximum aggregate transmit power reduction (in dB)
|
|
that can be performed in an L2 state. This is the sum of all reductions
|
|
of L2 Request (i.e., at transition of L0 to L2 state) and Power Trims.
|
|
Unit: dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.1.9 (L2-ATPRT)"
|
|
DEFVAL { 9 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 10 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfReferenceClock OBJECT-TYPE
|
|
SYNTAX Xdsl2LineClockReferenceType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the clock reference for the ATU-C in a VDSL Line."
|
|
DEFVAL { freeRun }
|
|
::= { hwVOPLineSpectrumConfProfEntry 11 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfBitSwapDs OBJECT-TYPE
|
|
SYNTAX Xdsl2BitSwap
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the bit swap downstream of a line."
|
|
DEFVAL { disable }
|
|
::= { hwVOPLineSpectrumConfProfEntry 12 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfBitSwapUs OBJECT-TYPE
|
|
SYNTAX Xdsl2BitSwap
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the bit swap upstream of a line."
|
|
DEFVAL { disable }
|
|
::= { hwVOPLineSpectrumConfProfEntry 13 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfScMaskDs OBJECT-TYPE
|
|
SYNTAX Xdsl2ScMaskDs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Downstream subcarriers mask.
|
|
A bitmap of 512 bits that allows masking up to 512 downstream subcarriers.
|
|
If bit i (0 <= i < NSCds) is set to '1', the respective downstream subcarrier
|
|
is masked, and if set to '0', the respective subcarrier is unmasked.
|
|
Note that there should always be unmasked subcarriers (i.e.,this object cannot be all 1's).
|
|
Also note that if NSCds < 512, all bits i(NSCds < i <= 512) should be set to '1'.
|
|
|
|
NSCds is the highest subcarrier index that can be transmitted in the downstream direction.
|
|
For G.992.3, G.992.4, and G.992.5, it is defined in the corresponding Recommendations.
|
|
For G.992.1, NSCds = 256 and for G.992.2, NSCds = 128.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.6 (CARMASKds)"
|
|
::= { hwVOPLineSpectrumConfProfEntry 14 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfScMaskUs OBJECT-TYPE
|
|
SYNTAX Xdsl2ScMaskUs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upstream subcarriers mask.
|
|
A bitmap of 512 bits that allows masking up to 512 downstream subcarriers.
|
|
If bit i (0 <= i < NSCds) is set to '1', the respective downstream subcarrier
|
|
is masked, and if set to '0', the respective subcarrier is unmasked.
|
|
Note that there should always be unmasked subcarriers (i.e.,this object cannot be all 1's).
|
|
Also note that if NSCds < 512, all bits i(NSCds < i <= 512) should be set to '1'.
|
|
|
|
NSCus is the highest subcarrier index that can be transmitted in the upstream direction.
|
|
For G.992.3, G.992.4, and G.992.5, it is defined in the corresponding Recommendation.
|
|
For Annex A/G.992.1 and G.992.2, NSCus = 32 and for Annex B/G.992.1, NSCus = 64.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.7 (CARMASKus)"
|
|
::= { hwVOPLineSpectrumConfProfEntry 15 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfVdsl2CarMask OBJECT-TYPE
|
|
SYNTAX Xdsl2CarMask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VDSL2 specific subcarriers mask.
|
|
This configuration parameter defines the restrictions, additional to the band plan, to determine
|
|
the set of subcarriers allowed for transmission in both upstream and downstream directions.
|
|
The parameter shall describe the not masked subcarriers as one or more frequency bands.
|
|
Each band is represented by start and stop subcarrier indices with a subcarrier spacing of 4.3125kHz.
|
|
The valid range of subcarrier indices runs from 0 to at least the index of the highest allowed
|
|
subcarrier in both transmission directions among all profiles enabled by the parameter
|
|
hwVOPLineSpectrumConfProfProfiles.
|
|
Up to 32 bands may be specified. Other subcarriers shall be masked.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.8 (VDSL2-CARMASK)"
|
|
::= { hwVOPLineSpectrumConfProfEntry 16 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfMsgMinUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (4000..248000)
|
|
UNITS "bits/second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum Overhead Rate Upstream.
|
|
Defines the minimum rate of the message-based overhead
|
|
that shall be maintained by the xTU in upstream direction.
|
|
Expressed in bits per second and ranges from 4000 to 248000 bps.
|
|
Unit: bits/second.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.5.1 (MSGMINus)"
|
|
DEFVAL { 4000 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 17 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfMsgMinDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (4000..248000)
|
|
UNITS "bits/second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum Overhead Rate Downstream.
|
|
Defines the minimum rate of the message-based overhead
|
|
that shall be maintained by the xTU in downstream direction.
|
|
Expressed in bits per second and ranges from 4000 to 248000 bps.
|
|
Unit: bits/second.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.5.2 (MSGMINds)"
|
|
DEFVAL { 4000 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 18 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfProfiles OBJECT-TYPE
|
|
SYNTAX Xdsl2LineProfiles
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration parameter contains the G.993.2 profiles to
|
|
be allowed by the near-end xTU on this line.
|
|
It is coded in a bitmap representation (0 if not allowed, 1 if allowed).
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.1.11 (PROFILES)"
|
|
::= { hwVOPLineSpectrumConfProfEntry 19 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfUs0Mask OBJECT-TYPE
|
|
SYNTAX Xdsl2LineUs0Mask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration parameter contains the US0 PSD masks to be allowed
|
|
by the near-end xTU on the line.
|
|
This parameter is only defined for G.993.2 Annex A.
|
|
It is represented as a bitmap (0 if not allowed and 1 if allowed).
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.18 (US0MASK)"
|
|
::= { hwVOPLineSpectrumConfProfEntry 20 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfCeFlag OBJECT-TYPE
|
|
SYNTAX Xdsl2LineCeFlag
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is a bit that enables the use of the optional cyclic extension values."
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.6.1 (CEFLAG)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 21 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object represents a pointer to one or more rows
|
|
in the hwVOPModeSpecificPSDConfProfTable. The number of pointers equals to the xDSL modes
|
|
enabled in hwVOPLineSpectrumConfProfXtuTransSysEna.
|
|
The following rule applies:
|
|
Every Octet addresses a xDSL mode (represented by one Bit in hwVOPLineSpectrumConfProfXtuTransSysEna).
|
|
The value identifies the specific profile in the hwVOPModeSpecificPSDConfProfTable
|
|
which applies for the specific mode.
|
|
|
|
The value '0' means that no profile applies because the respective mode is not enabled.
|
|
Each transmission mode enabled (hwVOPLineSpectrumConfProfXtuTransSysEna)
|
|
in the hwVOPLineSpectrumConfProfTable is covered by one and only one
|
|
of the Mode Specific PSD Profiles contained in that Line Spectrum Profile.
|
|
"
|
|
::= { hwVOPLineSpectrumConfProfEntry 22 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfForceInpDs OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in a given transmit direction,this parameter indicates that the framer settings
|
|
of the downstream bearer shall be selected such that the impulse noise protection computed according to the
|
|
formula specified in the relevant Recommendation is greater than or equal to the minimal impulse noise protection
|
|
requirement.
|
|
This flag shall have the same value for all the bearers of one line in the same direction.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.5 (FORCEINP)"
|
|
DEFVAL { false }
|
|
::= { hwVOPLineSpectrumConfProfEntry 23 }
|
|
|
|
|
|
hwVOPLineSpectrumConfProfForceInpUs OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in a given transmit direction,this parameter indicates that the framer settings
|
|
of the upstream bearer shall be selected such that the impulse noise protection computed according to the
|
|
formula specified in the relevant Recommendation is greater than or equal to the minimal impulse noise protection
|
|
requirement.
|
|
This flag shall have the same value for all the bearers of one line in the same direction.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.5 (FORCEINP)"
|
|
DEFVAL { false }
|
|
::= { hwVOPLineSpectrumConfProfEntry 24 }
|
|
|
|
hwVOPLineSpectrumConfProfRtxModeDs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
forbidden(0),
|
|
preferred(1),
|
|
forced(2),
|
|
testmode(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of operation of G.998.4 retransmission in downstream direction.
|
|
Options:
|
|
1. forbidden (0) - G.998.4 retransmission not allowed.
|
|
2. preferred (1) - G.998.4 retransmission is preferred.
|
|
3. forced (2) - Force the use of the G.998.4 retransmission.
|
|
4. testmode (3) - Force the use of the G.998.4 retransmission in test mode.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.11"
|
|
DEFVAL { forbidden }
|
|
::= { hwVOPLineSpectrumConfProfEntry 25 }
|
|
|
|
hwVOPLineSpectrumConfProfRtxModeUs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
forbidden(0),
|
|
preferred(1),
|
|
forced(2),
|
|
testmode(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of operation of G.998.4 retransmission in upstream direction.
|
|
Options:
|
|
1. forbidden (0) - G.998.4 retransmission not allowed.
|
|
2. preferred (1) - G.998.4 retransmission is preferred.
|
|
3. forced (2) - Force the use of the G.998.4 retransmission.
|
|
4. testmode (3) - Force the use of the G.998.4 retransmission in test mode.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.11"
|
|
DEFVAL { forbidden }
|
|
::= { hwVOPLineSpectrumConfProfEntry 26 }
|
|
|
|
hwVOPLineSpectrumConfProfLeftrThreshDs OBJECT-TYPE
|
|
SYNTAX Gauge32(0..99)
|
|
UNITS "0.01"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies the
|
|
threshold for declaring a near-end leftr defect. The value is coded as a fraction of the
|
|
NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the
|
|
ETR shall be used as the default threshold for declaring a leftr defect.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.12"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 27 }
|
|
|
|
hwVOPLineSpectrumConfProfLeftrThreshUs OBJECT-TYPE
|
|
SYNTAX Gauge32(0..99)
|
|
UNITS "0.01"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies the
|
|
threshold for declaring a near-end leftr defect. The value is coded as a fraction of the
|
|
NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the
|
|
ETR shall be used as the default threshold for declaring a leftr defect.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.12"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 28 }
|
|
|
|
hwVOPGfastLineSpectrumConfProfGfastProfiles OBJECT-TYPE
|
|
SYNTAX HWVOPGfastProfiles
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configuration parameter contains the G.fast profiles to
|
|
be allowed by the near-end xTU on this line.
|
|
It is coded in a bitmap representation (0 if not allowed, 1 if allowed).
|
|
Bit representation:
|
|
0 G.fast profile 106
|
|
1 G.fast profile 212
|
|
Default value: All profiles allowed.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 6"
|
|
::= { hwVOPLineSpectrumConfProfEntry 29 }
|
|
|
|
hwVOPGfastLineSpectrumConfProfLowFreqEdgeValue OBJECT-TYPE
|
|
SYNTAX Gauge32 (43..1023)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low-frequency Edge Stop-band Mask(LESM).
|
|
If a LESM is used, the LESM shall be specified with breakpoints.
|
|
These breakpoints are specified starting from ftr1, which is the start of the in-band PSD mask, as specified in [ITU-T G.9700].
|
|
This is not to be confused with ftr3, which is the start of the in-band part of the LESM.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.1.1"
|
|
DEFVAL { 43 }
|
|
::= { hwVOPLineSpectrumConfProfEntry 30 }
|
|
|
|
hwVOPGfastLineSpectrumConfProfGfastCarMaskDs OBJECT-TYPE
|
|
SYNTAX Xdsl2CarMask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.fast specific subcarriers mask.
|
|
This configuration parameter defines the restrictions, additional to the band plan, to determine
|
|
the set of subcarriers allowed for transmission in downstream directions.
|
|
The parameter shall describe the not masked subcarriers as one or more frequency bands.
|
|
Each band is represented by start and stop subcarrier indices with a subcarrier spacing of 51.75kHz.
|
|
The valid range of subcarrier indices runs from 0 to at least the index of the highest allowed
|
|
subcarrier in both transmission directions.
|
|
Up to 32 bands may be specified. Other subcarriers shall be masked.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.3"
|
|
::= { hwVOPLineSpectrumConfProfEntry 31 }
|
|
|
|
hwVOPGfastLineSpectrumConfProfGfastCarMaskUs OBJECT-TYPE
|
|
SYNTAX Xdsl2CarMask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.fast specific subcarriers mask.
|
|
This configuration parameter defines the restrictions, additional to the band plan, to determine
|
|
the set of subcarriers allowed for transmission in upstream directions.
|
|
The parameter shall describe the not masked subcarriers as one or more frequency bands.
|
|
Each band is represented by start and stop subcarrier indices with a subcarrier spacing of 51.75kHz.
|
|
The valid range of subcarrier indices runs from 0 to at least the index of the highest allowed
|
|
subcarrier in both transmission directions.
|
|
Up to 32 bands may be specified. Other subcarriers shall be masked.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.3"
|
|
::= { hwVOPLineSpectrumConfProfEntry 32 }
|
|
|
|
hwVOPModeSpecificPSDProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPModeSpecificPSDConfProfIndex
|
|
when creating entries in the hwVOPModeSpecificPSDConfProfTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPModeSpecificPSDConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 5 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPModeSpecificPSDConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
|
|
and upstream PSDs for a specific xDSL mode.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPModeSpecificPSDConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.6"
|
|
::= { hwVOPProfiles 6 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPModeSpecificPSDConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
|
|
and upstream PSDs for a specific xDSL mode.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPModeSpecificPSDConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.6"
|
|
INDEX { hwVOPModeSpecificPSDConfProfIndex }
|
|
::= { hwVOPModeSpecificPSDConfProfTable 1 }
|
|
|
|
|
|
HWVOPModeSpecificPSDConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPModeSpecificPSDConfProfIndex Unsigned32,
|
|
hwVOPModeSpecificPSDConfProfRowStatus RowStatus,
|
|
hwVOPModeSpecificPSDConfProfDescription OCTET STRING,
|
|
hwVOPModeSpecificPSDConfProfXdslMode Xdsl2TransmissionModeType, -- deprecated
|
|
hwVOPModeSpecificPSDConfProfMaxNomPsdDs Integer32,
|
|
hwVOPModeSpecificPSDConfProfMaxNomPsdUs Integer32,
|
|
hwVOPModeSpecificPSDConfProfMaxNomAtpDs Gauge32,
|
|
hwVOPModeSpecificPSDConfProfMaxNomAtpUs Gauge32,
|
|
hwVOPModeSpecificPSDConfProfaxAggRxPwrUs Integer32,
|
|
hwVOPModeSpecificPSDConfProfPsdMaskDs Xdsl2PsdMaskDs,
|
|
hwVOPModeSpecificPSDConfProfPsdMaskUs Xdsl2PsdMaskUs,
|
|
hwVOPModeSpecificPSDConfProfPsdMaskSelectUs Xdsl2LinePsdMaskSelectUs,
|
|
hwVOPModeSpecificPSDConfProfLimitMask Xdsl2LineLimitMask,
|
|
hwVOPModeSpecificPSDConfProfUs0Disable Xdsl2LineUs0Disable,
|
|
hwVOPModeSpecificPSDConfProfClassMask Xdsl2LineClassMask,
|
|
hwVOPGfastModeSpecificPSDConfProfPsdMaskDs HWVOPGfastPsdMask,
|
|
hwVOPGfastModeSpecificPSDConfProfPsdMaskUs HWVOPGfastPsdMask,
|
|
hwVOPGfastModeSpecificPSDConfProfMaxNomAtpDs Gauge32,
|
|
hwVOPGfastModeSpecificPSDConfProfMaxNomAtpUs Gauge32
|
|
}
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPModeSpecificPSDConfProfIndex identifies a row in the hwVOPModeSpecificPSDConfProfTable."
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 1 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
|
|
'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
A row in hwVOPModeSpecificPSDConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed in the hwVOPLineSpectrumConfProfTable
|
|
which refers to the row.
|
|
"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 2 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPModeSpecificPSDConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 3 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfXdslMode OBJECT-TYPE
|
|
SYNTAX Xdsl2TransmissionModeType
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A list of the different xDSL modes enabled in this profile.
|
|
It is coded in a bit-map representation with 1 or more bits set.
|
|
A bit set to '1' means that the profile applies to the respective xDSL Mode.
|
|
A bit set to '0' means that the profile does not apply to the respective xDSL Mode.
|
|
All 'reserved' bits should be set to '0'.
|
|
|
|
This object is deprecated in favour of hwVOPLineSpectrumConfProfXtuTransSysEna.
|
|
"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 4 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfMaxNomPsdDs OBJECT-TYPE
|
|
SYNTAX Integer32 (-600..-300)
|
|
UNITS "0.1 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum nominal transmit PSD in the downstream direction during initialization and Showtime.
|
|
It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm/Hz).
|
|
Unit: 0.1 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.1 (MAXNOMPSDds)"
|
|
DEFVAL { -400 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 5 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfMaxNomPsdUs OBJECT-TYPE
|
|
SYNTAX Integer32 (-600..-300)
|
|
UNITS "0.1 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum nominal transmit PSD in the upstream direction during initialization and Showtime.
|
|
It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm/Hz).
|
|
Unit: 0.1 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.2 (MAXNOMPSDus)"
|
|
DEFVAL { -380 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 6 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfMaxNomAtpDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..510)
|
|
UNITS "0.1 dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime.
|
|
It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm).
|
|
Unit: 0.1 dBm.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.3 (MAXNOMATPds)"
|
|
DEFVAL { 200 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 7 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfMaxNomAtpUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..510)
|
|
UNITS "0.1 dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime.
|
|
It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm).
|
|
Unit: 0.1 dBm.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.4 (MAXNOMATPus)"
|
|
DEFVAL { 125 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 8 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfaxAggRxPwrUs OBJECT-TYPE
|
|
SYNTAX Integer32 (-255..255 | 2147483647)
|
|
UNITS "0.1 dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum upstream aggregate receive power over the relevant set of subcarriers.
|
|
The xTU-C should verify that the upstream power cutback is such that this maximum
|
|
aggregate receive power value is honored.
|
|
It ranges from -255 to 255 units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
|
|
A value of 0x7FFFFFFF (2147483647) means that there is no limit.
|
|
Unit: 0.1 dBm.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.5 (MAXRXPWRus)"
|
|
DEFVAL { 125 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 9 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfPsdMaskDs OBJECT-TYPE
|
|
SYNTAX Xdsl2PsdMaskDs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The downstream PSD mask applicable at the U-R2 reference point.
|
|
This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask
|
|
defined in the relevant Recommendation (e.g., ITU-T Recs G.992.5 and G.993.2).
|
|
This is a string of 32 pairs of values in the following structure:
|
|
Octets 0-1 - Index of 1st subcarrier used in the context of a first breakpoint.
|
|
Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1.
|
|
Octets 3-5 - Same, for a 2nd breakpoint.
|
|
Octets 6-8 - Same, for a 3rd breakpoint.
|
|
This architecture continues until octets 94-95, which are associated with a 32nd breakpoint.
|
|
Each subcarrier index is an unsigned number in the range 0 and NSCds-1.
|
|
Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.
|
|
Valid values are in the range 0 to 190 (0 to -95dBm/Hz).
|
|
When the number of breakpoints is less than 32, all remaining octets are set to the value 0.
|
|
Note that the content of this object should be correlated with the subcarriers mask and with the RFI setup.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.9 (PSDMASKds)"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 10 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfPsdMaskUs OBJECT-TYPE
|
|
SYNTAX Xdsl2PsdMaskUs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upstream PSD mask applicable at the U-R2 reference point.
|
|
This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask
|
|
defined in the relevant Recommendation (e.g., ITU-T Recs G.992.5 and G.993.2).
|
|
This is a string of 16 pairs of values in the following structure:
|
|
Octets 0-1 - Index of 1st subcarrier used in the context of a first breakpoint.
|
|
Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1.
|
|
Octets 3-5 - Same, for a 2nd breakpoint.
|
|
Octets 6-8 - Same, for a 3rd breakpoint.
|
|
This architecture continues until octets 9-47, which are associated with a 16th breakpoint.
|
|
Each subcarrier index is an unsigned number in the range 0 and NSCus-1.
|
|
Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.
|
|
Valid values are in the range 0 to 190 (0 to -95dBm/Hz).
|
|
When the number of breakpoints is less than 16, all remaining octets are set to the value 0.
|
|
Note that the content of this object should be correlated with the subcarriers mask and with the RFI setup.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.12 (PSDMASKus)"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 11 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfPsdMaskSelectUs OBJECT-TYPE
|
|
SYNTAX Xdsl2LinePsdMaskSelectUs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The selected upstream PSD mask.
|
|
This parameter is used only for Annexes J and M of G.992.3 and G.992.5, and the same
|
|
selection is used for all relevant enabled bits in hwVOPLineSpectrumConfProfXtuTransSysEna.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.11 (Upstream PSD mask selection)"
|
|
DEFVAL { adlu32Eu32 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 12 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfLimitMask OBJECT-TYPE
|
|
SYNTAX Xdsl2LineLimitMask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class,
|
|
enabled by the near-end xTU on this line for each class of profiles.
|
|
This parameter is defined per VDSL2 Annex enabled in the xdsl2LConfProfXtuTransSysEna object.
|
|
Through this parameter, several limit PSD masks of the selected PSD mask class
|
|
(hwVOPModeSpecificPSDConfProfClassMask) may be enabled.
|
|
The enabling parameter is coded in a bitmap representation
|
|
(0 if the associated mask is not allowed, 1 if it is allowed).
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.16 (LIMITMASK)"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 13 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfUs0Disable OBJECT-TYPE
|
|
SYNTAX Xdsl2LineUs0Disable
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter indicates if the use of US0 is disabled for each limit PSD
|
|
mask enabled in the hwVOPModeSpecificPSDConfProfLimitMask parameter.
|
|
This parameter is defined per VDSL2 Annex enabled in the hwVOPLineSpectrumConfProfXtuTransSysEna object.
|
|
For each limit PSD mask enabled in hwVOPModeSpecificPSDConfProfLimitMask parameter,
|
|
a bit shall indicate if US0 is disabled.
|
|
The disabling parameter is coded as a bitmap. The bit is set to 1 if US0 is disabled
|
|
for the associated limit mask.
|
|
This parameter and the hwVOPModeSpecificPSDConfProfLimitMask parameter use the same structure.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.17 (US0DISABLE)"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 14 }
|
|
|
|
|
|
hwVOPModeSpecificPSDConfProfClassMask OBJECT-TYPE
|
|
SYNTAX Xdsl2LineClassMask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In order to reduce the number of configuration possibilities, the limit Power Spectral Density
|
|
masks (see hwVOPModeSpecificPSDConfProfLimitMask) are grouped in PSD mask classes.
|
|
Each class is designed such that the PSD levels of each limit PSD mask of a specific
|
|
class are equal in their respective passband above 552 kHz.
|
|
This parameter is defined per VDSL2 Annex enabled in the hwVOPLineSpectrumConfProfXtuTransSysEna object.
|
|
It selects a single PSD mask class per Annex that is activated at the VTU-O.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.15 (CLASSMASK)"
|
|
DEFVAL { b998M2x }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 15 }
|
|
|
|
hwVOPGfastModeSpecificPSDConfProfPsdMaskDs OBJECT-TYPE
|
|
SYNTAX HWVOPGfastPsdMask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The downstream PSD mask applicable at the U-O2 reference point.
|
|
This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask
|
|
defined in the relevant Recommendation (e.g., ITU-T Recs G.9701).
|
|
This is a string of 32 pairs of values in the following structure:
|
|
Octets 0-1 - Index of 1st subcarrier used in the context of a first breakpoint.
|
|
Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1.
|
|
Octets 3-5 - Same, for a 2nd breakpoint.
|
|
Octets 6-8 - Same, for a 3rd breakpoint.
|
|
This architecture continues until octets 94-95, which are associated with a 32nd breakpoint.
|
|
Each subcarrier index is an unsigned number in the range 0 and NSCds-1.
|
|
Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.
|
|
Valid values are in the range 0 to 190 (0 to -95dBm/Hz).
|
|
When the number of breakpoints is less than 32, all remaining octets are set to the value 0.
|
|
Note that the content of this object should be correlated with the subcarriers mask and with the RFI setup.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph #7.3.1.1"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 16 }
|
|
|
|
|
|
hwVOPGfastModeSpecificPSDConfProfPsdMaskUs OBJECT-TYPE
|
|
SYNTAX HWVOPGfastPsdMask
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upstream PSD mask applicable at the U-R2 reference point.
|
|
This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask
|
|
defined in the relevant Recommendation (e.g., ITU-T Recs G.9701).
|
|
This is a string of 16 pairs of values in the following structure:
|
|
Octets 0-1 - Index of 1st subcarrier used in the context of a first breakpoint.
|
|
Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1.
|
|
Octets 3-5 - Same, for a 2nd breakpoint.
|
|
Octets 6-8 - Same, for a 3rd breakpoint.
|
|
This architecture continues until octets 9-47, which are associated with a 16th breakpoint.
|
|
Each subcarrier index is an unsigned number in the range 0 and NSCus-1.
|
|
Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.
|
|
Valid values are in the range 0 to 190 (0 to -95dBm/Hz).
|
|
When the number of breakpoints is less than 16, all remaining octets are set to the value 0.
|
|
Note that the content of this object should be correlated with the subcarriers mask and with the RFI setup.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph #7.3.1.1"
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 17 }
|
|
|
|
hwVOPGfastModeSpecificPSDConfProfMaxNomAtpDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..510)
|
|
UNITS "0.1 dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime.
|
|
It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm).
|
|
Unit: 0.1 dBm.
|
|
"
|
|
DEFVAL { 40 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 18 }
|
|
|
|
|
|
hwVOPGfastModeSpecificPSDConfProfMaxNomAtpUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..510)
|
|
UNITS "0.1 dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime.
|
|
It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm).
|
|
Unit: 0.1 dBm.
|
|
"
|
|
DEFVAL { 40 }
|
|
::= { hwVOPModeSpecificPSDConfProfEntry 19 }
|
|
|
|
|
|
hwVOPUPBOProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPUPBOConfProfIndex
|
|
when creating entries in the hwVOPUPBOConfProfTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPUPBOConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 7 }
|
|
|
|
|
|
hwVOPUPBOConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPUPBOConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be
|
|
set to vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPUPBOConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.6"
|
|
::= { hwVOPProfiles 8 }
|
|
-- The UPBO Profile contains all the parameters related to upstream power back-off.
|
|
|
|
hwVOPUPBOConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPUPBOConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be
|
|
set to vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPUPBOConfProfIndex.
|
|
"
|
|
INDEX { hwVOPUPBOConfProfIndex }
|
|
::= { hwVOPUPBOConfProfTable 1 }
|
|
|
|
|
|
HWVOPUPBOConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPUPBOConfProfIndex Unsigned32,
|
|
hwVOPUPBOConfProfRowStatus RowStatus,
|
|
hwVOPUPBOConfProfDescription OCTET STRING,
|
|
hwVOPUPBOConfProfUpboKL Gauge32,
|
|
hwVOPUPBOConfProfUpboKLF Xdsl2UpboKLF,
|
|
hwVOPUPBOConfProfKlAuto Unsigned32,
|
|
hwVOPUPBOConfProfPsdAUs1 Integer32,
|
|
hwVOPUPBOConfProfPsdBUs1 Integer32,
|
|
hwVOPUPBOConfProfPsdAUs2 Integer32,
|
|
hwVOPUPBOConfProfPsdBUs2 Integer32,
|
|
hwVOPUPBOConfProfPsdAUs3 Integer32,
|
|
hwVOPUPBOConfProfPsdBUs3 Integer32,
|
|
hwVOPUPBOConfProfPsdAUs4 Integer32,
|
|
hwVOPUPBOConfProfPsdBUs4 Integer32,
|
|
hwVOPUPBOConfProfBoostMode Xdsl2UpboBoostMode,
|
|
hwVOPUPBOConfProfUpboKLREFUs1 Integer32,
|
|
hwVOPUPBOConfProfUpboKLREFUs2 Integer32,
|
|
hwVOPUPBOConfProfUpboKLREFUs3 Integer32,
|
|
hwVOPUPBOConfProfUpboKLREFUs4 Integer32,
|
|
hwVOPUPBOConfProfAeleMode Unsigned32,
|
|
hwVOPUPBOConfProfUpboElmt Unsigned32,
|
|
hwVOPGfastUPBOConfProfUpboKL Gauge32,
|
|
hwVOPGfastUPBOConfProfUpboKLF Xdsl2UpboKLF,
|
|
hwVOPGfastUPBOConfProfKlAuto Unsigned32,
|
|
hwVOPGfastUPBOConfProfUpboKLREF Integer32,
|
|
hwVOPGfastUPBOConfProfPsdA Integer32,
|
|
hwVOPGfastUPBOConfProfPsdB Integer32
|
|
}
|
|
|
|
|
|
hwVOPUPBOConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPUPBOConfProfIndex identifies a row in the hwVOPUPBOConfProfTable."
|
|
::= { hwVOPUPBOConfProfEntry 1 }
|
|
|
|
|
|
hwVOPUPBOConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
|
|
'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
A row in hwVOPUPBOConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPActSetupUpboProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPUPBOConfProfEntry 2 }
|
|
|
|
|
|
hwVOPUPBOConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPUPBOConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPUPBOConfProfEntry 3 }
|
|
|
|
|
|
hwVOPUPBOConfProfUpboKL OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..1280)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0,
|
|
configured by the CO-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB.
|
|
This parameter is relevant only if hwVOPUPBOConfProfUpboKLF is set to override(2),
|
|
which indicates that this parameter's value will override the VTUs' determination of the electrical length.
|
|
If hwVOPUPBOConfProfUpboKLF is set either to auto(1) or disableUpbo(3), then this parameter will be ignored.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.2 (UPBOKL)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 4 }
|
|
|
|
|
|
hwVOPUPBOConfProfUpboKLF OBJECT-TYPE
|
|
SYNTAX Xdsl2UpboKLF
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the upstream power backoff force mode."
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.3 (UPBOKLF)"
|
|
DEFVAL { disableUpbo }
|
|
::= { hwVOPUPBOConfProfEntry 5 }
|
|
|
|
|
|
hwVOPUPBOConfProfKlAuto OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the mode in which kl0 is computed when hwVOPUPBOConfProfUpboKLF is auto.
|
|
Options:
|
|
1--max(kl0_CO,kl0_CPE)
|
|
2--min(kl0_CO,kl0_CPE)
|
|
3--kl0_CO
|
|
4--kl0_CPE
|
|
"
|
|
DEFVAL { 3 }
|
|
::= { hwVOPUPBOConfProfEntry 6 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdAUs1 OBJECT-TYPE
|
|
SYNTAX Integer32 (4000..8095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US1.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs1 to 4000 and hwVOPUPBOConfProfPsdBUs1 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 5650 }
|
|
::= { hwVOPUPBOConfProfEntry 7 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdBUs1 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US1.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs1 to 4000 and hwVOPUPBOConfProfPsdBUs1 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 1020 }
|
|
::= { hwVOPUPBOConfProfEntry 8 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdAUs2 OBJECT-TYPE
|
|
SYNTAX Integer32 (4000..8095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US2.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs2 to 4000 and hwVOPUPBOConfProfPsdBUs2 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 5650 }
|
|
::= { hwVOPUPBOConfProfEntry 9 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdBUs2 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US2.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs2 to 4000 and hwVOPUPBOConfProfPsdBUs2 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 615 }
|
|
::= { hwVOPUPBOConfProfEntry 10 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdAUs3 OBJECT-TYPE
|
|
SYNTAX Integer32 (4000..8095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US3.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs3 to 4000 and hwVOPUPBOConfProfPsdBUs3 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 4000 }
|
|
::= { hwVOPUPBOConfProfEntry 11 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdBUs3 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US3.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs3 to 4000 and hwVOPUPBOConfProfPsdBUs3 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 12 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdAUs4 OBJECT-TYPE
|
|
SYNTAX Integer32 (4000..8095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US4.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs4 to 4000 and hwVOPUPBOConfProfPsdBUs4 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 4000 }
|
|
::= { hwVOPUPBOConfProfEntry 13 }
|
|
|
|
|
|
hwVOPUPBOConfProfPsdBUs4 OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off for the upstream band US4.
|
|
A UPBOPSD defined for each band shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPUPBOConfProfPsdAUs4 to 4000 and hwVOPUPBOConfProfPsdBUs4 to 0 is a special
|
|
configuration to disable UPBO in the respective upstream band.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.1 (UPBOPSD-pb)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 14 }
|
|
|
|
|
|
hwVOPUPBOConfProfBoostMode OBJECT-TYPE
|
|
SYNTAX Xdsl2UpboBoostMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Equalized FEXT UPBO method.
|
|
Options:
|
|
1. disable(1) - The Equalized FEXT UPBO method is not supported.
|
|
2. enable(2) - The Equalized FEXT UPBO method is supported.
|
|
"
|
|
DEFVAL { enable }
|
|
::= { hwVOPUPBOConfProfEntry 15 }
|
|
|
|
|
|
hwVOPUPBOConfProfUpboKLREFUs1 OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 18..635)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the UPBO reference electrical length used to compute the upstream
|
|
power back-off for the upstream band US1, for the optional Equalized FEXT UPBO method.
|
|
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
|
|
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.4 (UPBOKLREF-pb)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 16 }
|
|
|
|
|
|
hwVOPUPBOConfProfUpboKLREFUs2 OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 18..635)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the UPBO reference electrical length used to compute the upstream
|
|
power back-off for the upstream band US2, for the optional Equalized FEXT UPBO method.
|
|
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
|
|
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.4 (UPBOKLREF-pb)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 17 }
|
|
|
|
|
|
hwVOPUPBOConfProfUpboKLREFUs3 OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 18..635)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the UPBO reference electrical length used to compute the upstream
|
|
power back-off for the upstream band US3, for the optional Equalized FEXT UPBO method.
|
|
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
|
|
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.4 (UPBOKLREF-pb)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 18 }
|
|
|
|
|
|
hwVOPUPBOConfProfUpboKLREFUs4 OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 18..635)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the UPBO reference electrical length used to compute the upstream
|
|
power back-off for the upstream band US4, for the optional Equalized FEXT UPBO method.
|
|
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
|
|
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.14 a.4 (UPBOKLREF-pb)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 19 }
|
|
|
|
hwVOPUPBOConfProfAeleMode OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the UPBO electrical length estimation mode to be used
|
|
in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.993.2.
|
|
The value of this parameter is 0, 1, 2 or 3.
|
|
0-ELE_M0, 1-ELE_DS, 2-ELE_PB, 3-ELE_MIN
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.14"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 20 }
|
|
|
|
hwVOPUPBOConfProfUpboElmt OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the UPBO electrical length minimum threshold percentile
|
|
in percent used in the Alternative Electrical Length Estimation method (ELE-M1)
|
|
in clause 7.2.1.3.2.2/G.993.2. It is set by network management via the CO-MIB.
|
|
The parameter ranges from 0 to 15 percent in steps of 1 percent.
|
|
This value is communicated to the VTU-R via G.994.1 at start-up.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.14"
|
|
DEFVAL { 10 }
|
|
::= { hwVOPUPBOConfProfEntry 21 }
|
|
|
|
hwVOPGfastUPBOConfProfUpboKL OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..1280)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the G.fast electrical length expressed in dB at 1MHz, kl0,
|
|
configured by the DPU-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB.
|
|
This parameter is relevant only if hwVOPGfastUPBOConfProfUpboKLF is set to override(2),
|
|
which indicates that this parameter's value will override the XTUs' determination of the electrical length.
|
|
If hwVOPGfastUPBOConfProfUpboKLF is set either to auto(1) or disableUpbo(3), then this parameter will be ignored.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.4.2.1"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 22 }
|
|
|
|
|
|
hwVOPGfastUPBOConfProfUpboKLF OBJECT-TYPE
|
|
SYNTAX Xdsl2UpboKLF
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the G.fast upstream power backoff force mode."
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.4.2.1"
|
|
DEFVAL { disableUpbo }
|
|
::= { hwVOPUPBOConfProfEntry 23 }
|
|
|
|
|
|
hwVOPGfastUPBOConfProfKlAuto OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the mode in which kl0 is computed when hwVOPGfastUPBOConfProfUpboKLF is auto.
|
|
Options:
|
|
1--max(kl0_CO,kl0_CPE)
|
|
2--min(kl0_CO,kl0_CPE)
|
|
3--kl0_CO
|
|
4--kl0_CPE
|
|
"
|
|
DEFVAL { 3 }
|
|
::= { hwVOPUPBOConfProfEntry 24 }
|
|
|
|
|
|
hwVOPGfastUPBOConfProfPsdA OBJECT-TYPE
|
|
SYNTAX Integer32 (4000..8095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPGfastUPBOConfProfPsdA to 4000 and hwVOPGfastUPBOConfProfPsdB to 0 is a special
|
|
configuration to disable UPBO.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.4"
|
|
DEFVAL { 5650 }
|
|
::= { hwVOPUPBOConfProfEntry 25 }
|
|
|
|
|
|
hwVOPGfastUPBOConfProfPsdB OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4095)
|
|
UNITS "0.01 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
|
|
used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a, b].
|
|
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
|
|
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
|
|
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
|
|
Setting hwVOPGfastUPBOConfProfPsdA to 4000 and hwVOPGfastUPBOConfProfPsdB to 0 is a special
|
|
configuration to disable UPBO.
|
|
Unit: 0.01 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.4"
|
|
DEFVAL { 1020 }
|
|
::= { hwVOPUPBOConfProfEntry 26 }
|
|
|
|
hwVOPGfastUPBOConfProfUpboKLREF OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 18..635)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter defines the UPBO reference electrical length used to compute the upstream
|
|
power back-off, for the optional Equalized FEXT UPBO method.
|
|
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.4.2.2"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPUPBOConfProfEntry 27 }
|
|
|
|
hwVOPDPBOProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPDPBOConfProfIndex
|
|
when creating entries in the hwVOPDPBOConfProfTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPDPBOConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 9 }
|
|
|
|
|
|
hwVOPDPBOConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPDPBOConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPDPBOConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.6"
|
|
::= { hwVOPProfiles 10 }
|
|
|
|
|
|
hwVOPDPBOConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPDPBOConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPDPBOConfProfIndex.
|
|
"
|
|
INDEX { hwVOPDPBOConfProfIndex }
|
|
::= { hwVOPDPBOConfProfTable 1 }
|
|
|
|
|
|
HWVOPDPBOConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPDPBOConfProfIndex Unsigned32,
|
|
hwVOPDPBOConfProfRowStatus RowStatus,
|
|
hwVOPDPBOConfProfProfDescription OCTET STRING,
|
|
hwVOPDPBOConfProfWkMdMask Unsigned32,
|
|
hwVOPDPBOConfProfEsEL Gauge32,
|
|
hwVOPDPBOConfProfEselMin Unsigned32,
|
|
hwVOPDPBOConfProfEPsd Xdsl2PsdMaskDs,
|
|
hwVOPDPBOConfProfCableModelA Gauge32,
|
|
hwVOPDPBOConfProfCableModelB Gauge32,
|
|
hwVOPDPBOConfProfCableModelC Gauge32,
|
|
hwVOPDPBOConfProfMus Gauge32,
|
|
hwVOPDPBOConfProfFMin Gauge32,
|
|
hwVOPDPBOConfProfFMax Gauge32,
|
|
hwVOPDPBOConfFEXTFactor INTEGER
|
|
}
|
|
|
|
|
|
hwVOPDPBOConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPDPBOConfProfIndex identifies a row in the hwVOPDPBOConfProfTable."
|
|
::= { hwVOPDPBOConfProfEntry 1 }
|
|
|
|
|
|
hwVOPDPBOConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
|
|
'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
A row in hwVOPDPBOConfProfTable is said to be not referenced when there is no
|
|
instance of hwVOPActSetupDpboProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPDPBOConfProfEntry 2 }
|
|
|
|
|
|
hwVOPDPBOConfProfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPDPBOConfProfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPDPBOConfProfEntry 3 }
|
|
|
|
hwVOPDPBOConfProfWkMdMask OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..511)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the current enabled DPBO working mode mask.
|
|
DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2.
|
|
Options :
|
|
1--current enabled dpbo work mode:ADSL
|
|
2--current enabled dpbo work mode:ADSL2+
|
|
3--current enabled dpbo work mode:ADSL,ADSL2+
|
|
4--current enabled dpbo work mode:VDSL2
|
|
5--current enabled dpbo work mode:ADSL,VDSL2
|
|
6--current enabled dpbo work mode:ADSL2+,VDSL2
|
|
7--current enabled dpbo work mode:ADSL,ADSL2+,VDSL2
|
|
"
|
|
DEFVAL { 7 }
|
|
::= { hwVOPDPBOConfProfEntry 4 }
|
|
|
|
hwVOPDPBOConfProfEsEL OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..511)
|
|
UNITS "0.5 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the assumed electrical length of cables (E-side cables)
|
|
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C
|
|
that is subject to spectrally shaped downstream power back- off (DPBO) depending on this length.
|
|
The electrical length is defined as the loss (in dB) of an equivalent length of hypothetical
|
|
cable at a reference frequency defined by the network operator or in spectrum management regulations.
|
|
This parameter shall be coded as an unsigned integer representing an electrical length
|
|
from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB.
|
|
All values in the range are valid. If this parameter is set to zero, the DPBO shall be disabled.
|
|
Unit: 0.5dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESEL)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPDPBOConfProfEntry 5 }
|
|
|
|
hwVOPDPBOConfProfEselMin OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..511)
|
|
UNITS "0.5dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using
|
|
the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this KVz
|
|
using cross-cables to additional KVz), including the KVz at the MSAN site. This value must
|
|
be adjustable as the minimum requirement via the SNMP interface in the configuration profile
|
|
for each VDSL2 port, and is set individually for each MSAN site and usage. As an option,
|
|
As an option, adjustment can be done for each MSAN or line card, thus taking effect for
|
|
entire port groups. It is used only for determining the MUF.
|
|
Unit: 0.5dB.
|
|
"
|
|
::= { hwVOPDPBOConfProfEntry 6 }
|
|
|
|
hwVOPDPBOConfProfEPsd OBJECT-TYPE
|
|
SYNTAX Xdsl2PsdMaskDs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange.
|
|
This parameter shall use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds).
|
|
The maximum number of breakpoints for xdsl2LConfProfDpboEPsd is 16.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOEPSD)"
|
|
::= { hwVOPDPBOConfProfEntry 7 }
|
|
|
|
|
|
hwVOPDPBOConfProfCableModelA OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..640)
|
|
UNITS "2^-8"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables
|
|
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the
|
|
xTU-C that is subject to spectrally shaped downstream power back-off (DPBO) depending on this value.
|
|
The cable model is in terms of three scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
|
|
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
|
|
that are used to estimate the frequency dependent loss of E-side cables calculated
|
|
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.
|
|
Possible values shall be coded as unsigned integers representing a scalar value
|
|
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2^-8.
|
|
All values in the range are valid. This parameter is used only for G.993.2.
|
|
Unit: 2^-8.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMA)"
|
|
DEFVAL { 256 }
|
|
::= { hwVOPDPBOConfProfEntry 8 }
|
|
|
|
|
|
hwVOPDPBOConfProfCableModelB OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..640)
|
|
UNITS "2^-8"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables
|
|
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C
|
|
that is subject to spectrally shaped downstream power back-off (DPBO) depending on this value.
|
|
The cable model is in terms of three scalars dsl2LConfProfDpboEsCableModelA (DPBOESCMA),
|
|
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
|
|
that are used to estimate the frequency dependent loss of E-side cables calculated
|
|
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.
|
|
Possible values shall be coded as unsigned integers representing a scalar value
|
|
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2^-8.
|
|
All values in the range are valid. This parameter is used only for G.993.2.
|
|
Unit: 2^-8.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMB)"
|
|
DEFVAL { 512 }
|
|
::= { hwVOPDPBOConfProfEntry 9 }
|
|
|
|
|
|
hwVOPDPBOConfProfCableModelC OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..640)
|
|
UNITS "2^-8"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables
|
|
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the
|
|
xTU-C that is subject to spectrally shaped downstream power back-off (DPBO) depending on this value.
|
|
The cable model is in terms of three scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
|
|
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
|
|
that are used to estimate the frequency dependent loss of E-side cables calculated
|
|
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.
|
|
Possible values shall be coded as unsigned integers representing a scalar value
|
|
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2^-8.
|
|
All values in the range are valid. This parameter is used only for G.993.2.
|
|
Unit: 2^-8.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOESCMC)"
|
|
DEFVAL { 256 }
|
|
::= { hwVOPDPBOConfProfEntry 10 }
|
|
|
|
|
|
hwVOPDPBOConfProfMus OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..255)
|
|
UNITS "-0.5 dBm/Hz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz)
|
|
for exchange based services, used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX)
|
|
defined below [to determine the DPBO]. It shall be coded as an unsigned integer representing
|
|
a PSD mask level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz.
|
|
All values in the range are valid.
|
|
NOTE - The PSD mask level is 3.5 dB above the signal PSD level.
|
|
This parameter is used only for G.993.2.
|
|
Unit: -0.5 dBm/Hz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOMUS)"
|
|
DEFVAL { 180 }
|
|
::= { hwVOPDPBOConfProfEntry 11 }
|
|
|
|
|
|
hwVOPDPBOConfProfFMin OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..2048)
|
|
UNITS "4.3125 kHz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the minimum frequency from which the DPBO shall be applied.
|
|
It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps of 4.3125 kHz.
|
|
This parameter is used only for G.993.2.
|
|
Unit: 4.3125 kHz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMIN)"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPDPBOConfProfEntry 12 }
|
|
|
|
|
|
hwVOPDPBOConfProfFMax OBJECT-TYPE
|
|
SYNTAX Gauge32 (32..8191)
|
|
UNITS "4.3125 kHz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the maximum frequency at which DPBO may be applied.
|
|
It ranges from 138 kHz (coded as 32) to 35323.6875 kHz (coded as 8191) in steps of 4.3125 kHz.
|
|
This parameter is used only for G.993.2.
|
|
Unit: 4.3125 kHz.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.13 (DPBOFMAX)"
|
|
DEFVAL { 511 }
|
|
::= { hwVOPDPBOConfProfEntry 13 }
|
|
|
|
hwVOPDPBOConfFEXTFactor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the switch of the delta FEXT-factor.
|
|
Options:
|
|
1. disable(1) - The switch of the delta FEXT-factor is disabled
|
|
2. enable(2) - The switch of the delta FEXT-factor is enabled
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPDPBOConfProfEntry 14 }
|
|
|
|
|
|
hwVOPRFIProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPRFIConfProfIndex
|
|
when creating entries in the hwVOPRFIConfProfTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPRFIConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 11 }
|
|
|
|
|
|
hwVOPRFIConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPRFIConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RFI notches are necessary only when radio services may be disturbed during operation,
|
|
therefore this parameter should be separated from all other profiles.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPRFIConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.6"
|
|
::= { hwVOPProfiles 12 }
|
|
|
|
|
|
hwVOPRFIConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPRFIConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RFI notches are necessary only when radio services may be disturbed during operation,
|
|
therefore this parameter should be separated from all other profiles.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPRFIConfProfIndex.
|
|
"
|
|
INDEX { hwVOPRFIConfProfIndex }
|
|
::= { hwVOPRFIConfProfTable 1 }
|
|
|
|
|
|
HWVOPRFIConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPRFIConfProfIndex Unsigned32,
|
|
hwVOPRFIConfProfRowStatus RowStatus,
|
|
hwVOPRFIConfProfDescription OCTET STRING,
|
|
hwVOPRFIConfProfRfiBands Xdsl2RfiBands,
|
|
hwVOPGfastRFIConfProfRfiBands Xdsl2RfiBands,
|
|
hwVOPGfastRFIConfProfIarBands HWVOPGfastIarBands
|
|
}
|
|
|
|
|
|
hwVOPRFIConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPRFIConfProfIndex identifies a row in the hwVOPRFIConfProfTable."
|
|
::= { hwVOPRFIConfProfEntry 1 }
|
|
|
|
|
|
hwVOPRFIConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
|
|
'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
A row in hwVOPRFIConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPActSetupRfiProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPRFIConfProfEntry 2 }
|
|
|
|
|
|
hwVOPRFIConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPRFIConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPRFIConfProfEntry 3 }
|
|
|
|
|
|
hwVOPRFIConfProfRfiBands OBJECT-TYPE
|
|
SYNTAX Xdsl2RfiBands
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For ADSL2plus operation mode, this configuration parameter defines the subset of downstream PSD mask
|
|
breakpoints, as specified in hwVOPModeSpecificPSDConfProfPsdMaskDs (PSDMASKds), that shall be
|
|
used to notch an RFI band. This subset consists of pairs of consecutive subcarrier indices
|
|
belonging to breakpoints: [ti; ti + 1], corresponding to the low level of the notch.
|
|
The specific interpolation around these points is defined in ITU-T Rec. G.992.5.
|
|
|
|
For VDSL2 operation mode, this configuration parameter defines the bands where the PSD shall be reduced
|
|
as specified in ITU-T Rec. G.993.2 #7.2.1.2. Each band shall be represented by a start and stop subcarrier
|
|
indices with a subcarrier spacing of 4.3125 kHz.
|
|
|
|
Up to 16 bands may be specified.
|
|
This parameter defines the RFI bands for both upstream and downstream directions.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.2.10 (RFIBANDS)"
|
|
::= { hwVOPRFIConfProfEntry 4 }
|
|
|
|
hwVOPGfastRFIConfProfRfiBands OBJECT-TYPE
|
|
SYNTAX Xdsl2RfiBands
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the bands where the PSD shall be reduced as specified in ITU-T G.9701 #7.3.1.2.
|
|
Each band shall be represented by a start and stop subcarrier indices with a subcarrier spacing of 51.75 kHz.
|
|
Up to 16 bands may be specified.
|
|
This parameter defines the RFI bands for both upstream and downstream directions.
|
|
Default value: No RFI bands.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.2 and 12.3.2.1.1"
|
|
::= { hwVOPRFIConfProfEntry 5 }
|
|
|
|
hwVOPGfastRFIConfProfIarBands OBJECT-TYPE
|
|
SYNTAX HWVOPGfastIarBands
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines for each International Amateur Radio (IAR) band whether transmit PSD reduction is enabled or disabled in that band.
|
|
It is represented as a bitmap (0 if not allowed and 1 if allowed)with the following definitions.
|
|
Bit representation:
|
|
0 International amateur radio band 1800 2000 kHz
|
|
1 International amateur radio band 3500 4000 kHz
|
|
2 International amateur radio band 7000 7300 kHz
|
|
3 International amateur radio band 10100 10150 kHz
|
|
4 International amateur radio band 14000 14350 kHz
|
|
5 International amateur radio band 18068 18168 kHz
|
|
6 International amateur radio band 21000 21450 kHz
|
|
7 International amateur radio band 24890 24990 kHz
|
|
8 International amateur radio band 28000 29700 kHz
|
|
9 International amateur radio band 50000 54000 kHz
|
|
10 International amateur radio band 70000 70500 kHz
|
|
11 International amateur radio band 144000 148000 kHz
|
|
Default value: All IAR bands disabled (no PSD reduction).
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 7.3.1.2 and 12.3.2.1.1, G.994.1 Table 11.70.8 and 11.70.8.1"
|
|
::= { hwVOPRFIConfProfEntry 6 }
|
|
|
|
|
|
hwVOPSNRMarginProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPSNRMarginConfProfIndex
|
|
when creating entries in the hwVOPSNRMarginConfProfTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPSNRMarginConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 13 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPSNRMarginConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise margins are important for line robustness and need to be configured independently
|
|
from other spectrum related parameters to reduce the amount of combinations.
|
|
These parameters may be adjusted because of the changed disturber's impact while data rates aren't changed.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPSNRMarginConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.7"
|
|
::= { hwVOPProfiles 14 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPSNRMarginConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise margins are important for line robustness and need to be configured independently
|
|
from other spectrum related parameters to reduce the amount of combinations.
|
|
These parameters may be adjusted because of the changed disturber's impact while data rates aren't changed.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPSNRMarginConfProfIndex.
|
|
"
|
|
INDEX { hwVOPSNRMarginConfProfIndex }
|
|
::= { hwVOPSNRMarginConfProfTable 1 }
|
|
|
|
|
|
HWVOPSNRMarginConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPSNRMarginConfProfIndex Unsigned32,
|
|
hwVOPSNRMarginConfProfRowStatus RowStatus,
|
|
hwVOPSNRMarginConfProfDescription OCTET STRING,
|
|
hwVOPSNRMarginConfProfMinSnrmDs Gauge32,
|
|
hwVOPSNRMarginConfProfMinSnrmUs Gauge32,
|
|
hwVOPSNRMarginConfProfTargetSnrmDs Gauge32,
|
|
hwVOPSNRMarginConfProfTargetSnrmUs Gauge32,
|
|
hwVOPSNRMarginConfProfMaxSnrmDs Gauge32,
|
|
hwVOPSNRMarginConfProfMaxSnrmUs Gauge32,
|
|
hwVOPSNRMarginConfProfSnrModeDs Xdsl2LineSnrMode,
|
|
hwVOPSNRMarginConfProfSnrModeUs Xdsl2LineSnrMode,
|
|
hwVOPSNRMarginConfProfRaModeDs Xdsl2RaMode,
|
|
hwVOPSNRMarginConfProfRaModeUs Xdsl2RaMode,
|
|
hwVOPSNRMarginConfProfRaUsNrmDs Gauge32,
|
|
hwVOPSNRMarginConfProfRaUsNrmUs Gauge32,
|
|
hwVOPSNRMarginConfProfRaDsNrmDs Gauge32,
|
|
hwVOPSNRMarginConfProfRaDsNrmUs Gauge32,
|
|
hwVOPSNRMarginConfProfUsTimeDs Gauge32,
|
|
hwVOPSNRMarginConfProfUsTimeUs Gauge32,
|
|
hwVOPSNRMarginConfProfDsTimeDs Gauge32,
|
|
hwVOPSNRMarginConfProfDsTimeUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMinSnrmDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMinSnrmUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfTargetSnrmDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfTargetSnrmUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMaxSnrmDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMaxSnrmUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfSnrModeDs Xdsl2LineSnrMode,
|
|
hwVOPGfastSNRMarginConfProfSnrModeUs Xdsl2LineSnrMode,
|
|
hwVOPGfastSNRMarginConfProfRaModeDs HWVOPGfastRaMode,
|
|
hwVOPGfastSNRMarginConfProfRaModeUs HWVOPGfastRaMode,
|
|
hwVOPGfastSNRMarginConfProfRaUsNrmDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfRaUsNrmUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfRaDsNrmDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfRaDsNrmUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfUsTimeDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfUsTimeUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfDsTimeDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfDsTimeUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfTaretSnrmRmcDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfTaretSnrmRmcUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMinSnrmRmcDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMinSnrmRmcUs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMaxBLRmcDs Gauge32,
|
|
hwVOPGfastSNRMarginConfProfMaxBLRmcUs Gauge32
|
|
}
|
|
|
|
|
|
hwVOPSNRMarginConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPSNRMarginConfProfIndex identifies a row in the hwVOPSNRMarginConfProfTable."
|
|
::= { hwVOPSNRMarginConfProfEntry 1 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
|
|
'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
A row in hwVOPSNRMarginConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPActSetupNoiseMarginProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPSNRMarginConfProfEntry 2 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPSNRMarginConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPSNRMarginConfProfEntry 3 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfMinSnrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum Noise Margin the xTU-R receiver shall tolerate.
|
|
If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase
|
|
the xTU-C transmit power.
|
|
If an increase of xTU-C transmit power is not possible, a loss-of-margin (LOM) defect occurs,
|
|
the xTU-R shall fail and attempt to re-initialize and the NMS shall be notified.
|
|
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0 means that there is no minimum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.3.5 (MINSNRMds)"
|
|
DEFVAL { 10 }
|
|
::= { hwVOPSNRMarginConfProfEntry 4 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfMinSnrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum Noise Margin the xTU-C receiver shall tolerate.
|
|
If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase
|
|
the xTU-R transmit power.
|
|
If an increase of xTU-R transmit power is not possible, a loss-of-margin (LOM) defect occurs,
|
|
the xTU-C shall fail and attempt to re-initialize and the NMS shall be notified.
|
|
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0 means that there is no minimum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.3.6 (MINSNRMus)"
|
|
DEFVAL { 10 }
|
|
::= { hwVOPSNRMarginConfProfEntry 5 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfTargetSnrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement
|
|
for each of the downstream bearer channels, to successfully complete initialization.
|
|
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.3.1 (TARSNRMds)"
|
|
DEFVAL { 60 }
|
|
::= { hwVOPSNRMarginConfProfEntry 6 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfTargetSnrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement
|
|
for each of the upstream bearer channels, to successfully complete initialization.
|
|
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.3.2 (TARSNRMus)"
|
|
DEFVAL { 60 }
|
|
::= { hwVOPSNRMarginConfProfEntry 7 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfMaxSnrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310 | 2147483647)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum Noise Margin the xTU-R receiver shall try to sustain.
|
|
If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce
|
|
the xTU-C transmit power to get a noise margin below this limit (if this functionality is supported).
|
|
The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0x7FFFFFFF (2147483647) means that there is no maximum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.3.3 (MAXSNRMds)"
|
|
DEFVAL { 310 }
|
|
::= { hwVOPSNRMarginConfProfEntry 8 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfMaxSnrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310 | 2147483647)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum Noise Margin the xTU-C receiver shall try to sustain.
|
|
If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce
|
|
the xTU-R transmit power to get a noise margin below this limit (if this functionality is supported).
|
|
The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0x7FFFFFFF (2147483647) means that there is no maximum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.3.4 (MAXSNRMus)"
|
|
DEFVAL { 310 }
|
|
::= { hwVOPSNRMarginConfProfEntry 9 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfSnrModeDs OBJECT-TYPE
|
|
SYNTAX Xdsl2LineSnrMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter enables the transmitter referred virtual noise in the downstream direction.
|
|
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.7.1 (SNRMODEds)"
|
|
DEFVAL { virtualNoiseDisabled }
|
|
::= { hwVOPSNRMarginConfProfEntry 10 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfSnrModeUs OBJECT-TYPE
|
|
SYNTAX Xdsl2LineSnrMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter enables the transmitter referred virtual noise in the upstream direction.
|
|
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.7.2 (SNRMODEus)"
|
|
DEFVAL { virtualNoiseDisabled }
|
|
::= { hwVOPSNRMarginConfProfEntry 11 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfRaModeDs OBJECT-TYPE
|
|
SYNTAX Xdsl2RaMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of operation of a rate-adaptive xTU-C in the transmit direction."
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.1 (RA-MODEds)"
|
|
DEFVAL { raInit }
|
|
::= { hwVOPSNRMarginConfProfEntry 12 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfRaModeUs OBJECT-TYPE
|
|
SYNTAX Xdsl2RaMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of operation of a rate-adaptive xTU-R in the transmit direction."
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.2 (RA-MODEus)"
|
|
DEFVAL { raInit }
|
|
::= { hwVOPSNRMarginConfProfEntry 13 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfRaUsNrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Downstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
If the downstream noise margin is above this value, and stays above it for more than the time specified by the
|
|
hwVOPSNRMarginConfProfUsTimeDs, the xTU-R shall attempt to increase the downstream net data rate.
|
|
The Downstream Up-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.3 (RA-USNRMds)"
|
|
DEFVAL { 310 }
|
|
::= { hwVOPSNRMarginConfProfEntry 14 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfRaUsNrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Upstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
|
|
If the upstream noise margin is above this value, and stays above it for more than the time specified by the
|
|
hwVOPSNRMarginConfProfUsTimeUs, the xTU-C shall attempt to increase the upstream net data rate.
|
|
The Upstream Up-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.4 (RA-USNRMus)"
|
|
DEFVAL { 310 }
|
|
::= { hwVOPSNRMarginConfProfEntry 15 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfRaDsNrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Downstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
If the downstream noise margin is below this value, and stays below it for more than the time specified by the
|
|
hwVOPSNRMarginConfProfDsTimeDs, the xTU-R shall attempt to increase the downstream net data rate.
|
|
The Downstream Down-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.7 (RA-DSNRMds)"
|
|
DEFVAL { 10 }
|
|
::= { hwVOPSNRMarginConfProfEntry 16 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfRaDsNrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Upstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
|
|
If the upstream noise margin is below this value, and stays below it for more than the time specified by the
|
|
hwVOPSNRMarginConfProfDsTimeUs, the xTU-C shall attempt to increase the upstream net data rate.
|
|
The Upstream Down-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.8 (RA-DSNRMus)"
|
|
DEFVAL { 10 }
|
|
::= { hwVOPSNRMarginConfProfEntry 17 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfUsTimeDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Downstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
The interval of time that the downstream noise margin should stay above the Downstream Up-Shift Noise Margin
|
|
before the xTU-R shall attempt to increase the downstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.5 (RA-UTIMEds)"
|
|
DEFVAL { 3600 }
|
|
::= { hwVOPSNRMarginConfProfEntry 18 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfUsTimeUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Upstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
|
|
The interval of time the upstream noise margin should stay above the Upstream Up-Shift Noise Margin
|
|
before the xTU-C shall attempt to increase the upstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.6 (RA-UTIMEus)"
|
|
DEFVAL { 3600 }
|
|
::= { hwVOPSNRMarginConfProfEntry 19 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfDsTimeDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Downstream Downshift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
The interval of time the downstream noise margin should stay below the Downstream Down-Shift Noise Margin
|
|
before the xTU-R shall attempt to decrease the downstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.9 (RA-DTIMEds)"
|
|
DEFVAL { 3600 }
|
|
::= { hwVOPSNRMarginConfProfEntry 20 }
|
|
|
|
|
|
hwVOPSNRMarginConfProfDsTimeUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Upstream Down-Shift Time Interval, to be used when hwVOPSNRMarginConfProfUsTimeUs is set to dynamicRa.
|
|
The interval of time the upstream noise margin should stay below the Upstream Down-Shift Noise Margin
|
|
before the xTU-C shall attempt to decrease the upstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.10 (RA-DTIMEus)"
|
|
DEFVAL { 3600 }
|
|
::= { hwVOPSNRMarginConfProfEntry 21 }
|
|
|
|
hwVOPGfastSNRMarginConfProfMinSnrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast minimum Noise Margin the xTU-R receiver shall tolerate.
|
|
If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase
|
|
the xTU-C transmit power.
|
|
If an increase of xTU-C transmit power is not possible, a loss-of-margin (LOM) defect occurs,
|
|
the xTU-R shall fail and attempt to re-initialize and the NMS shall be notified.
|
|
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0 means that there is no minimum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSNRMarginConfProfEntry 22 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfMinSnrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast minimum Noise Margin the xTU-C receiver shall tolerate.
|
|
If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase
|
|
the xTU-R transmit power.
|
|
If an increase of xTU-R transmit power is not possible, a loss-of-margin (LOM) defect occurs,
|
|
the xTU-C shall fail and attempt to re-initialize and the NMS shall be notified.
|
|
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0 means that there is no minimum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSNRMarginConfProfEntry 23 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfTargetSnrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement,
|
|
to successfully complete initialization.
|
|
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.3.2.1"
|
|
DEFVAL { 90 }
|
|
::= { hwVOPSNRMarginConfProfEntry 24 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfTargetSnrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement,
|
|
to successfully complete initialization.
|
|
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.3.2.1"
|
|
DEFVAL { 90 }
|
|
::= { hwVOPSNRMarginConfProfEntry 25 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfMaxSnrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310 | 2147483647)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast maximum Noise Margin the xTU-R receiver shall try to sustain.
|
|
If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce
|
|
the xTU-C transmit power to get a noise margin below this limit (if this functionality is supported).
|
|
The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0x7FFFFFFF (2147483647) means that there is no maximum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.7"
|
|
DEFVAL { 310 }
|
|
::= { hwVOPSNRMarginConfProfEntry 26 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfMaxSnrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310 | 2147483647)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast maximum Noise Margin the xTU-C receiver shall try to sustain.
|
|
If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce
|
|
the xTU-R transmit power to get a noise margin below this limit (if this functionality is supported).
|
|
The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0x7FFFFFFF (2147483647) means that there is no maximum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.7"
|
|
DEFVAL { 310 }
|
|
::= { hwVOPSNRMarginConfProfEntry 27 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfSnrModeDs OBJECT-TYPE
|
|
SYNTAX Xdsl2LineSnrMode
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This parameter enables the G.fast transmitter referred virtual noise in the downstream direction.
|
|
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.7.1 (SNRMODEds)"
|
|
DEFVAL { virtualNoiseDisabled }
|
|
::= { hwVOPSNRMarginConfProfEntry 28 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfSnrModeUs OBJECT-TYPE
|
|
SYNTAX Xdsl2LineSnrMode
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This parameter enables the G.fast transmitter referred virtual noise in the upstream direction.
|
|
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.7.2 (SNRMODEus)"
|
|
DEFVAL { virtualNoiseDisabled }
|
|
::= { hwVOPSNRMarginConfProfEntry 29 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfRaModeDs OBJECT-TYPE
|
|
SYNTAX HWVOPGfastRaMode
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The mode of operation of a rate-adaptive xTU-C in the transmit direction.
|
|
Options:
|
|
1. manual (1) - No Rate-Adaptation. The initialization process
|
|
attempts to synchronize to a specified rate.
|
|
2. raInit (2) - Rate-Adaptation during initialization process only,
|
|
which attempts to synchronize to a rate between minimum
|
|
and maximum specified values.
|
|
3. dynamicRa (3) - Dynamic Rate-Adaptation during initialization process
|
|
as well as during Showtime.
|
|
4. dynamicwithfra(4)- Rate-Adaptation during show time by FRA and SRA.
|
|
In this mode, enabling of FRA and SRA is mandatory.
|
|
"
|
|
DEFVAL { dynamicwithfra }
|
|
::= { hwVOPSNRMarginConfProfEntry 30 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfRaModeUs OBJECT-TYPE
|
|
SYNTAX HWVOPGfastRaMode
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The mode of operation of a rate-adaptive xTU-R in the transmit direction.
|
|
Options:
|
|
1. manual (1) - No Rate-Adaptation. The initialization process
|
|
attempts to synchronize to a specified rate.
|
|
2. raInit (2) - Rate-Adaptation during initialization process only,
|
|
which attempts to synchronize to a rate between minimum
|
|
and maximum specified values.
|
|
3. dynamicRa (3) - Dynamic Rate-Adaptation during initialization process
|
|
as well as during Showtime.
|
|
4. dynamicwithfra(4)- Rate-Adaptation during show time by FRA and SRA.
|
|
In this mode, enabling of FRA and SRA is mandatory.
|
|
"
|
|
DEFVAL { dynamicwithfra }
|
|
::= { hwVOPSNRMarginConfProfEntry 31 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfRaUsNrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast Downstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
If the downstream noise margin is above this value, and stays above it for more than the time specified by the
|
|
hwVOPGfastSNRMarginConfProfUsTimeDs, the xTU-R shall attempt to increase the Downstream net data rate.
|
|
The Downstream Up-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1"
|
|
DEFVAL { 120 }
|
|
::= { hwVOPSNRMarginConfProfEntry 32 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfRaUsNrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast Upstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
|
|
If the upstream noise margin is above this value, and stays above it for more than the time specified by the
|
|
hwVOPGfastSNRMarginConfProfUsTimeUs, the xTU-C shall attempt to increase the Upstream net data rate.
|
|
The Upstream Up-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1"
|
|
DEFVAL { 120 }
|
|
::= { hwVOPSNRMarginConfProfEntry 33 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfRaDsNrmDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast Downstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
If the downstream noise margin is below this value, and stays below it for more than the time specified by the
|
|
hwVOPGfastSNRMarginConfProfDsTimeDs, the xTU-R shall attempt to increase the Downstream net data rate.
|
|
The Downstream Down-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1"
|
|
DEFVAL { 60 }
|
|
::= { hwVOPSNRMarginConfProfEntry 34 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfRaDsNrmUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast Upstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
|
|
If the upstream noise margin is below this value, and stays below it for more than the time specified by the
|
|
hwVOPGfastSNRMarginConfProfDsTimeUs, the xTU-C shall attempt to increase the Upstream net data rate.
|
|
The Upstream Down-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.4.8 (RA-DSNRMus)"
|
|
DEFVAL { 60 }
|
|
::= { hwVOPSNRMarginConfProfEntry 35 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfUsTimeDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast Downstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
The interval of time that the downstream noise margin should stay above the Downstream Up-Shift Noise Margin
|
|
before the xTU-R shall attempt to increase the downstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1."
|
|
DEFVAL { 8 }
|
|
::= { hwVOPSNRMarginConfProfEntry 36 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfUsTimeUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast Upstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
|
|
The interval of time the upstream noise margin should stay above the Upstream Up-Shift Noise Margin
|
|
before the xTU-C shall attempt to increase the upstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1."
|
|
DEFVAL { 8 }
|
|
::= { hwVOPSNRMarginConfProfEntry 37 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfDsTimeDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The G.fast Downstream Downshift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa.
|
|
The interval of time the downstream noise margin should stay below the Downstream Down-Shift Noise Margin
|
|
before the xTU-R shall attempt to decrease the downstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1."
|
|
DEFVAL { 2}
|
|
::= { hwVOPSNRMarginConfProfEntry 38 }
|
|
|
|
|
|
hwVOPGfastSNRMarginConfProfDsTimeUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..16383)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Upstream Down-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa.
|
|
The interval of time the upstream noise margin should stay below the Upstream Down-Shift Noise Margin
|
|
before the xTU-C shall attempt to decrease the upstream net data rate.
|
|
The time interval ranges from 0 to 16383 seconds.
|
|
Unit: seconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 12.3.4.2.1."
|
|
DEFVAL { 2 }
|
|
::= { hwVOPSNRMarginConfProfEntry 39 }
|
|
|
|
hwVOPGfastSNRMarginConfProfTaretSnrmRmcDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the downstream RMC noise margin that the FTU-R receiver shall achieve,
|
|
relative to the BER requirement, or better, to successfully complete initialization.
|
|
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.2, paragraph 7.1.6.1"
|
|
DEFVAL { 90 }
|
|
::= { hwVOPSNRMarginConfProfEntry 40 }
|
|
|
|
hwVOPGfastSNRMarginConfProfTaretSnrmRmcUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the upstream RMC noise margin that the FTU-O receiver shall achieve,
|
|
relative to the BER requirement, or better, to successfully complete initialization.
|
|
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.2, paragraph 7.1.6.2"
|
|
DEFVAL { 90 }
|
|
::= { hwVOPSNRMarginConfProfEntry 41 }
|
|
|
|
hwVOPGfastSNRMarginConfProfMinSnrmRmcDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the downstream minimum noise margin the FTU-R receiver tolerates for the RMC.
|
|
If the downstream RMC noise margin falls below this level, the FTU-R initiates the RPA procedure.
|
|
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0 means that there is no minimum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.2, paragraph 7.1.6.3"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSNRMarginConfProfEntry 42 }
|
|
|
|
hwVOPGfastSNRMarginConfProfMinSnrmRmcUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..310)
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the upstream minimum noise margin the FTU-O receiver tolerates for the RMC.
|
|
If the downstream RMC noise margin falls below this level, the FTU-O initiates the RPA procedure.
|
|
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
|
|
A value of 0 means that there is no minimum.
|
|
Unit: 0.1 dB.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.2, paragraph 7.1.6.4"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSNRMarginConfProfEntry 43 }
|
|
|
|
hwVOPGfastSNRMarginConfProfMaxBLRmcDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (2..6)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the maximum allowed bit-loading for the downstream RMC sub-carriers.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.2, paragraph 7.1.6.5"
|
|
DEFVAL { 6 }
|
|
::= { hwVOPSNRMarginConfProfEntry 44 }
|
|
|
|
hwVOPGfastSNRMarginConfProfMaxBLRmcUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (2..6)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the maximum allowed bit-loading for the upstream RMC sub-carriers.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.2, paragraph 7.1.6.6"
|
|
DEFVAL { 6 }
|
|
::= { hwVOPSNRMarginConfProfEntry 45 }
|
|
|
|
hwVOPINPDelayProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPINPDelayConfProfIndex
|
|
when creating entries in the hwVOPINPDelayConfProfTableTable.
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPINPDelayConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 15 }
|
|
|
|
|
|
hwVOPINPDelayConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPINPDelayConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The INP-Delay parameters for each pair of upstream and downstream channels will be in
|
|
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
|
|
INP-Delay Profiles. If less than the maximum number of channels is to be used then the
|
|
scalars corresponding to non-required channels MUST be set to a null value (0).
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPINPDelayConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.7"
|
|
::= { hwVOPProfiles 16 }
|
|
|
|
|
|
hwVOPINPDelayConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPINPDelayConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The INP-Delay parameters for each pair of upstream and downstream channels will be in
|
|
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
|
|
INP-Delay Profiles. If less than the maximum number of channels is to be used then the
|
|
scalars corresponding to non-required channels MUST be set to a null value (0).
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPINPDelayConfProfIndex.
|
|
"
|
|
INDEX { hwVOPINPDelayConfProfIndex }
|
|
::= { hwVOPINPDelayConfProfTable 1 }
|
|
|
|
|
|
HWVOPINPDelayConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPINPDelayConfProfIndex Unsigned32,
|
|
hwVOPINPDelayConfProfRowStatus RowStatus,
|
|
hwVOPINPDelayConfProfDescription OCTET STRING,
|
|
hwVOPINPDelayConfProfMinProtectionDs Xdsl2SymbolProtection,
|
|
hwVOPINPDelayConfProfMinProtection8Ds Xdsl2SymbolProtection8,
|
|
hwVOPINPDelayConfProfMaxDelayDs Gauge32,
|
|
hwVOPINPDelayConfProfMinProtectionUs Xdsl2SymbolProtection,
|
|
hwVOPINPDelayConfProfMinProtection8Us Xdsl2SymbolProtection8,
|
|
hwVOPINPDelayConfProfMaxDelayUs Gauge32,
|
|
hwVOPINPDelayConfProfMaxDelayVar Gauge32,
|
|
hwVOPINPDelayConfProfInitPolicy Xdsl2ChInitPolicy,
|
|
hwVOPINPDelayConfProfMaxDelayRtxDs Gauge32,
|
|
hwVOPINPDelayConfProfMaxDelayRtxUs Gauge32,
|
|
hwVOPINPDelayConfProfMinDelayRtxDs Gauge32,
|
|
hwVOPINPDelayConfProfMinDelayRtxUs Gauge32,
|
|
hwVOPINPDelayConfProfMinInpShineRtxDs Gauge32,
|
|
hwVOPINPDelayConfProfMinInpShineRtxUs Gauge32,
|
|
hwVOPINPDelayConfProfMinInp8ShineRtxDs Gauge32,
|
|
hwVOPINPDelayConfProfMinInp8ShineRtxUs Gauge32,
|
|
hwVOPINPDelayConfProfShineRatioRtxDs Gauge32,
|
|
hwVOPINPDelayConfProfShineRatioRtxUs Gauge32,
|
|
hwVOPINPDelayConfProfMinInpReinRtxDs Gauge32,
|
|
hwVOPINPDelayConfProfMinInpReinRtxUs Gauge32,
|
|
hwVOPINPDelayConfProfMinInp8ReinRtxDs Gauge32,
|
|
hwVOPINPDelayConfProfMinInp8ReinRtxUs Gauge32,
|
|
hwVOPINPDelayConfProfIatReinRtxDs INTEGER,
|
|
hwVOPINPDelayConfProfIatReinRtxUs INTEGER,
|
|
hwVOPINPDelayConfProfMaxDelayOctetSplit Gauge32,
|
|
hwVOPGfastINPDelayConfProfMaxDelayRtxDs Gauge32,
|
|
hwVOPGfastINPDelayConfProfMaxDelayRtxUs Gauge32,
|
|
hwVOPGfastINPDelayConfProfMinInpShineRtxDs Gauge32,
|
|
hwVOPGfastINPDelayConfProfMinInpShineRtxUs Gauge32,
|
|
hwVOPGfastINPDelayConfProfShineRatioRtxDs Gauge32,
|
|
hwVOPGfastINPDelayConfProfShineRatioRtxUs Gauge32,
|
|
hwVOPGfastINPDelayConfProfMinInpReinRtxDs Gauge32,
|
|
hwVOPGfastINPDelayConfProfMinInpReinRtxUs Gauge32,
|
|
hwVOPGfastINPDelayConfProfIatReinRtxDs INTEGER,
|
|
hwVOPGfastINPDelayConfProfIatReinRtxUs INTEGER,
|
|
hwVOPGfastINPDelayConfProfMinRNRatioRtxDs Gauge32,
|
|
hwVOPGfastINPDelayConfProfMinRNRatioRtxUs Gauge32
|
|
}
|
|
|
|
|
|
hwVOPINPDelayConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPINPDelayConfProfIndex identifies a row in the hwVOPINPDelayConfProfTable."
|
|
::= { hwVOPINPDelayConfProfEntry 1 }
|
|
|
|
|
|
hwVOPINPDelayConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy'
|
|
or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
A row in hwVOPINPDelayConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPActSetupInpDelayProfId1-4 in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPINPDelayConfProfEntry 2 }
|
|
|
|
|
|
hwVOPINPDelayConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPINPDelayConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPINPDelayConfProfEntry 3 }
|
|
|
|
|
|
hwVOPINPDelayConfProfMinProtectionDs OBJECT-TYPE
|
|
SYNTAX Xdsl2SymbolProtection
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
|
|
protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing
|
|
of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
|
|
and can take the values 1/2 and any integer from 0 to 16, inclusive.
|
|
If the xTU does not support the configured INPMIN value,it shall use the nearest supported impulse noise protection
|
|
greater than INPMIN.
|
|
Unit: symbols.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.3 (INPMINds)"
|
|
DEFVAL { noProtection }
|
|
::= { hwVOPINPDelayConfProfEntry 4 }
|
|
|
|
|
|
hwVOPINPDelayConfProfMinProtection8Ds OBJECT-TYPE
|
|
SYNTAX Xdsl2SymbolProtection8
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
|
|
protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing
|
|
of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
|
|
and can take any integer value from 0 to 16, inclusive.
|
|
Unit: symbols.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8ds)"
|
|
::= { hwVOPINPDelayConfProfEntry 5 }
|
|
|
|
|
|
hwVOPINPDelayConfProfMaxDelayDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63 | 255)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in downstream direction, this parameter is the maximum one-way
|
|
interleaving delay introduced by the PMS-TC on downstream direction.
|
|
The xTUs shall choose the S (factor) and D(depth) values such that the actual one-way
|
|
interleaving delay (Xdsl2ChStatusActDelay - VDSL2-LINE-MIB) is as close as possible to,
|
|
but less than or equal to hwVOPINPDelayConfProfMaxDelayDs.
|
|
The delay is coded in ms, with the value 0 indicating no delay bound is being imposed.
|
|
|
|
The delay is coded in ms, with the special values 0, 1 and 255.
|
|
- The value 0 indicates no delay bound is being imposed.
|
|
- The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode
|
|
and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3
|
|
and G.992.4 operating modes (G.997.1 special value S1).
|
|
- The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2).
|
|
Unit: milliseconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.2 (Maximum interleaving delay)"
|
|
::= { hwVOPINPDelayConfProfEntry 6 }
|
|
|
|
|
|
hwVOPINPDelayConfProfMinProtectionUs OBJECT-TYPE
|
|
SYNTAX Xdsl2SymbolProtection
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in upstream direction, this parameter specifies the minimum
|
|
impulse noise protection for the upstream bearer channel if it is transported over DMT symbols
|
|
with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols
|
|
with a subcarrier spacing of 4.3125 kHz and can take the values 1/2 and any integer from 0 to 16,
|
|
inclusive.
|
|
If the xTU does not support the configured INPMIN value, it shall use the nearest supported impulse
|
|
noise protection greater than INPMIN.
|
|
Unit: symbols.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.3 (INPMINds)"
|
|
DEFVAL { noProtection }
|
|
::= { hwVOPINPDelayConfProfEntry 7 }
|
|
|
|
|
|
hwVOPINPDelayConfProfMinProtection8Us OBJECT-TYPE
|
|
SYNTAX Xdsl2SymbolProtection8
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in upstream direction, this parameter specifies the minimum
|
|
impulse noise protection for the upstream bearer channel if it is transported over DMT symbols
|
|
with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols
|
|
with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 16, inclusive.
|
|
Unit: symbols.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.4 (INPMIN8ds)"
|
|
::= { hwVOPINPDelayConfProfEntry 8 }
|
|
|
|
|
|
hwVOPINPDelayConfProfMaxDelayUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63 | 255)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in upstream direction, this parameter is the maximum one-way
|
|
interleaving delay introduced by the PMS-TC on upstream direction.
|
|
The xTUs shall choose the S (factor) and D(depth) values such that the actual one-way
|
|
interleaving delay (Xdsl2ChStatusActDelay - VDSL2-LINE-MIB) is as close as possible to,
|
|
but less than or equal to hwVOPINPDelayConfProfMaxDelayUs.
|
|
The delay is coded in ms, with the value 0 indicating no delay bound is being imposed.
|
|
|
|
The delay is coded in ms, with the special values 0, 1 and 255.
|
|
- The value 0 indicates no delay bound is being imposed.
|
|
- The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode
|
|
and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3
|
|
and G.992.4 operating modes (G.997.1 special value S1).
|
|
- The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2).
|
|
Unit: milliseconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.2.2 (Maximum interleaving delay)"
|
|
::= { hwVOPINPDelayConfProfEntry 9 }
|
|
|
|
|
|
hwVOPINPDelayConfProfMaxDelayVar OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..255)
|
|
UNITS "0.1 milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This optional VDSL2 specific parameter specifies the maximum value
|
|
for the delay variation allowed in an OLR procedure.
|
|
It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1 to 25.4 milliseconds)
|
|
with the special value 255 which indicates that no delay variation bound is imposed.
|
|
Unit: 0.1 milliseconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1 Amendment 1, paragraph #7.3.2.9 (DVMAX)"
|
|
DEFVAL { 255 }
|
|
::= { hwVOPINPDelayConfProfEntry 10 }
|
|
|
|
|
|
hwVOPINPDelayConfProfInitPolicy OBJECT-TYPE
|
|
SYNTAX Xdsl2ChInitPolicy
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is not used in a given transmit direction, this parameter indicates
|
|
which policy shall be applied to determine the transceiver configuration parameters at
|
|
initialization. The valid values for CIPOLICY are 0,1 and 2.
|
|
Those policies are defined in the respective Recommendations.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10 (CIPOLICY)"
|
|
DEFVAL { policy0 }
|
|
::= { hwVOPINPDelayConfProfEntry 11 }
|
|
|
|
hwVOPINPDelayConfProfMaxDelayRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..63)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the maximum for the instantaneous delay due to the effect of retransmission only
|
|
(see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms.
|
|
Unit: milliseconds
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.11"
|
|
::= { hwVOPINPDelayConfProfEntry 12 }
|
|
|
|
hwVOPINPDelayConfProfMaxDelayRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..63)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies
|
|
the maximum for the instantaneous delay due to the effect of retransmission only
|
|
(see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms.
|
|
Unit: milliseconds
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.11"
|
|
::= { hwVOPINPDelayConfProfEntry 13 }
|
|
|
|
hwVOPINPDelayConfProfMinDelayRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the minimum for the instantaneous delay due to the effect of retransmission only
|
|
(see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms.
|
|
Unit: milliseconds
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.12"
|
|
::= { hwVOPINPDelayConfProfEntry 14 }
|
|
|
|
hwVOPINPDelayConfProfMinDelayRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies
|
|
the minimum for the instantaneous delay due to the effect of retransmission only
|
|
(see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms.
|
|
Unit: milliseconds
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.12"
|
|
::= { hwVOPINPDelayConfProfEntry 15 }
|
|
|
|
hwVOPINPDelayConfProfMinInpShineRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63)
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the minimum impulse noise protection against SHINE for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
|
|
and can take any integer value from 0 to 63, inclusive.
|
|
Unit: symbols
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.13"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 16 }
|
|
|
|
hwVOPINPDelayConfProfMinInpShineRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63)
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies the
|
|
minimum impulse noise protection against SHINE for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
|
|
and can take any integer value from 0 to 63, inclusive.
|
|
Unit: symbols
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.13"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 17 }
|
|
|
|
hwVOPINPDelayConfProfMinInp8ShineRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..127)
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the minimum impulse noise protection against SHINE for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
|
|
and can take any integer value from 0 to 127, inclusive.
|
|
Unit: symbols
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.14"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 18 }
|
|
|
|
hwVOPINPDelayConfProfMinInp8ShineRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..127)
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies the
|
|
minimum impulse noise protection against SHINE for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
|
|
and can take any integer value from 0 to 127, inclusive.
|
|
Unit: symbols
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.14"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 19 }
|
|
|
|
hwVOPINPDelayConfProfShineRatioRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the SHINE ratio (detailed definition see G.998.4).
|
|
The values range from 0 to 0.100 in increments of 0.001.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.15"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 20 }
|
|
|
|
hwVOPINPDelayConfProfShineRatioRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies
|
|
the SHINE ratio (detailed definition see G.998.4).
|
|
The values range from 0 to 0.100 in increments of 0.001.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.15"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 21 }
|
|
|
|
hwVOPINPDelayConfProfMinInpReinRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the minimum impulse noise protection against REIN for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
|
|
and can take any integer value from 0 to 7, inclusive.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.16"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 22 }
|
|
|
|
hwVOPINPDelayConfProfMinInpReinRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies
|
|
the minimum impulse noise protection against REIN for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
|
|
and can take any integer value from 0 to 7, inclusive.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.16"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 23 }
|
|
|
|
hwVOPINPDelayConfProfMinInp8ReinRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..13)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the minimum impulse noise protection against REIN for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
|
|
and can take any integer value from 0 to 13, inclusive.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.17"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 24 }
|
|
|
|
hwVOPINPDelayConfProfMinInp8ReinRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..13)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies
|
|
the minimum impulse noise protection against REIN for the bearer channel if it is
|
|
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
|
|
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
|
|
and can take any integer value from 0 to 13, inclusive.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.17"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 25 }
|
|
|
|
hwVOPINPDelayConfProfIatReinRtxDs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
frequency100Hz(0),
|
|
frequency120Hz(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in downstream direction, this parameter specifies
|
|
the inter-arrival time that shall be assumed for REIN protection.
|
|
Options:
|
|
1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz
|
|
2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.18"
|
|
DEFVAL { frequency100Hz }
|
|
::= { hwVOPINPDelayConfProfEntry 26 }
|
|
|
|
hwVOPINPDelayConfProfIatReinRtxUs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
frequency100Hz(0),
|
|
frequency120Hz(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If retransmission is used in upstream direction, this parameter specifies
|
|
the inter-arrival time that shall be assumed for REIN protection.
|
|
Options:
|
|
1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz
|
|
2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.18"
|
|
DEFVAL { frequency100Hz }
|
|
::= { hwVOPINPDelayConfProfEntry 27 }
|
|
|
|
hwVOPINPDelayConfProfMaxDelayOctetSplit OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100 | 255)
|
|
UNITS "percents"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The line configuration parameter MAXDELAYOCTET-split (MDOSPLIT) defines the percentage of the MAXDELAYOCTET_ext
|
|
if operating in ITU-T G.998.4 or MAXDELAYOCTET in other cases allocated to the downstream direction. All of the remaining
|
|
MAXDELAYOCTET or MAXDELAYOCTET_ext shall be allocated for use in the upstream direction.
|
|
The detailed specification is in ITU-T G.993.2 and ITU-T G.998.4.
|
|
MDOSPLIT shall be expressed as a percentage, with valid range from 5 percent to 95 percent inclusive, in steps of 1 percent.
|
|
The value 0% is valid only if the maximum downstream interleaving delay is configured with the special value S1 (see clause 7.3.2.2)
|
|
and retransmission is disabled in the downstream direction. The value 100% is valid only if the maximum upstream interleaving delay
|
|
is configured with the special value S1 (see clause 7.3.2.2) and retransmission is disabled in the upstream direction.
|
|
A special value (255) shall indicate that the VTU-O is allowed to use a vendor discretionary algorithm.
|
|
NOTE - The special value is introduced to ensure backwards compatibility.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.14"
|
|
DEFVAL { 255 }
|
|
::= { hwVOPINPDelayConfProfEntry 28 }
|
|
|
|
hwVOPGfastINPDelayConfProfMaxDelayRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (4..252)
|
|
UNITS "0.25 milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast downstream maximum allowed delay for retransmission.
|
|
The delay values range from 1 to 63 ms in steps of 0.25 ms.
|
|
Unit: 0.25 milliseconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 11.4.2.4"
|
|
DEFVAL { 40 }
|
|
::= { hwVOPINPDelayConfProfEntry 29 }
|
|
|
|
hwVOPGfastINPDelayConfProfMaxDelayRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (4..252)
|
|
UNITS "0.25 milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast upstream maximum allowed delay for retransmission.
|
|
The delay values range from 1 to 63 ms in steps of 0.25 ms.
|
|
Unit: 0.25 milliseconds.
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.9701, paragraph 11.4.2.4"
|
|
DEFVAL { 40 }
|
|
::= { hwVOPINPDelayConfProfEntry 30 }
|
|
|
|
hwVOPGfastINPDelayConfProfMinInpShineRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..520)
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast downstream minimum impulse noise protection against SHINE for the bearer channel
|
|
if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz.
|
|
The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 51.75 kHz
|
|
and can take any integer value from 0 to 520, inclusive.
|
|
Unit: symbols
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.6"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 31 }
|
|
|
|
hwVOPGfastINPDelayConfProfMinInpShineRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..520)
|
|
UNITS "symbols"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast upstream minimum impulse noise protection against SHINE for the bearer channel
|
|
if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz.
|
|
The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 51.75 kHz
|
|
and can take any integer value from 0 to 520, inclusive.
|
|
Unit: symbols
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.6"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 32 }
|
|
|
|
hwVOPGfastINPDelayConfProfShineRatioRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast downstream SHINE ratio.
|
|
The values range from 0 to 0.1 in increments of 0.001.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.7"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 33 }
|
|
|
|
hwVOPGfastINPDelayConfProfShineRatioRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast upstream SHINE ratio.
|
|
The values range from 0 to 0.1 in increments of 0.001.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.7"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 34 }
|
|
|
|
hwVOPGfastINPDelayConfProfMinInpReinRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast downstream minimum impulse noise protection against REIN for the bearer channel
|
|
if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz.
|
|
The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 51.75 kHz
|
|
and can take any integer value from 0 to 63, inclusive.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.8"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 35 }
|
|
|
|
hwVOPGfastINPDelayConfProfMinInpReinRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast upstream minimum impulse noise protection against REIN for the bearer channel
|
|
if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz.
|
|
The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 51.75 kHz
|
|
and can take any integer value from 0 to 63, inclusive.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.8"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 36 }
|
|
|
|
hwVOPGfastINPDelayConfProfIatReinRtxDs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
frequency100Hz(0),
|
|
frequency120Hz(1),
|
|
frequency300Hz(2),
|
|
frequency360Hz(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast downstream inter-arrival time that shall be assumed for REIN protection.
|
|
Options:
|
|
1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz
|
|
2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz
|
|
3. frequency300Hz(2) - an inter-arrival time derived from a REIN at 300 Hz
|
|
4. frequency360Hz(3) - an inter-arrival time derived from a REIN at 360 Hz
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.9"
|
|
DEFVAL { frequency100Hz }
|
|
::= { hwVOPINPDelayConfProfEntry 37 }
|
|
|
|
hwVOPGfastINPDelayConfProfIatReinRtxUs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
frequency100Hz(0),
|
|
frequency120Hz(1),
|
|
frequency300Hz(2),
|
|
frequency360Hz(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast upstream inter-arrival time that shall be assumed for REIN protection.
|
|
Options:
|
|
1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz
|
|
2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz
|
|
3. frequency300Hz(2) - an inter-arrival time derived from a REIN at 300 Hz
|
|
4. frequency360Hz(3) - an inter-arrival time derived from a REIN at 360 Hz
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.9"
|
|
DEFVAL { frequency100Hz }
|
|
::= { hwVOPINPDelayConfProfEntry 38 }
|
|
|
|
hwVOPGfastINPDelayConfProfMinRNRatioRtxDs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast downstream minimum Reed-Solomon RFEC/NFEC ratio.
|
|
The ratio is computed as the number of redundancy bytes (RFEC) divided by the total
|
|
number of bytes (NFEC) in each Reed-Solomon codeword.
|
|
The values range from 0 to 8/32 in steps of 1/32.
|
|
Unit: 1/32
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.11"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 39 }
|
|
|
|
hwVOPGfastINPDelayConfProfMinRNRatioRtxUs OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter specifies the G.fast upstream minimum Reed-Solomon RFEC/NFEC ratio.
|
|
The ratio is computed as the number of redundancy bytes (RFEC) divided by the total
|
|
number of bytes (NFEC) in each Reed-Solomon codeword.
|
|
The values range from 0 to 8/32 in steps of 1/32.
|
|
Unit: 1/32
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 11.4.2.11"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINPDelayConfProfEntry 40 }
|
|
|
|
hwVOPVirtualNoiseProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPVirtualNoiseConfProfIndex
|
|
when creating entries in the hwVOPVirtualNoiseConfProfTable.
|
|
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPVirtualNoiseConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 17 }
|
|
|
|
|
|
hwVOPVirtualNoiseConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPVirtualNoiseConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Virtual Noise Profile MUST contain the virtual noise PSDs.
|
|
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
|
|
hwVOPSNRMarginConfProfRaModeUs) are set to 0.
|
|
The SNRMODE parameters for upstream and downstream are in the hwVOPSNRMarginConfProfTable.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPVirtualNoiseConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.7"
|
|
::= { hwVOPProfiles 18 }
|
|
|
|
|
|
hwVOPVirtualNoiseConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPVirtualNoiseConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Virtual Noise Profile MUST contain the virtual noise PSDs.
|
|
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
|
|
hwVOPSNRMarginConfProfRaModeUs) are set to 0.
|
|
The SNRMODE parameters for upstream and downstream are in the hwVOPSNRMarginConfProfTable.
|
|
Entries in this table MUST be maintained in a persistent manner.
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPVirtualNoiseConfProfIndex.
|
|
"
|
|
INDEX { hwVOPVirtualNoiseConfProfIndex }
|
|
::= { hwVOPVirtualNoiseConfProfTable 1 }
|
|
|
|
|
|
HWVOPVirtualNoiseConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPVirtualNoiseConfProfIndex Unsigned32,
|
|
hwVOPVirtualNoiseConfProfRowStatus RowStatus,
|
|
hwVOPVirtualNoiseConfProfDescription OCTET STRING,
|
|
hwVOPVirtualNoiseConfProfTxRefVnDs Xdsl2LineTxRefVnDs,
|
|
hwVOPVirtualNoiseConfProfTxRefVnUs Xdsl2LineTxRefVnUs
|
|
}
|
|
|
|
|
|
hwVOPVirtualNoiseConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPVirtualNoiseConfProfIndex identifies a row in the hwVOPVirtualNoiseConfProfTable."
|
|
::= { hwVOPVirtualNoiseConfProfEntry 1 }
|
|
|
|
|
|
hwVOPVirtualNoiseConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy'
|
|
or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
|
|
A row in hwVOPVirtualNoiseConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPActSetupVNoiseProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPVirtualNoiseConfProfEntry 2 }
|
|
|
|
|
|
hwVOPVirtualNoiseConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPVirtualNoiseConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPVirtualNoiseConfProfEntry 3 }
|
|
|
|
|
|
hwVOPVirtualNoiseConfProfTxRefVnDs OBJECT-TYPE
|
|
SYNTAX Xdsl2LineTxRefVnDs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the downstream transmitter referred virtual noise.
|
|
The TXREFVNds shall be specified through a set of breakpoints.
|
|
Each breakpoint shall consist of a subcarrier index t, with a subcarrier spacing of 4.3125 kHz,
|
|
and a noise PSD level (expressed in dBm/Hz) at that subcarrier.
|
|
The set of breakpoints can then be represented as: [(t1,PSD1), (t2, PSD2), ... , (tN, PSDN)].
|
|
32 groups can be configured at most, and 3 bytes for each group. The first two bytes represent tone index,
|
|
the 3th byte represents the configured PSD value. The relation between configured PSD value and real PSD
|
|
value is: REAL PSD = (CONFIGURED PSD + 80) * (-0.5dBm/Hz).
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.7.3 (TXREFVNds)"
|
|
::= { hwVOPVirtualNoiseConfProfEntry 4 }
|
|
|
|
|
|
hwVOPVirtualNoiseConfProfTxRefVnUs OBJECT-TYPE
|
|
SYNTAX Xdsl2LineTxRefVnUs
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configuration parameter defines the upstream transmitter referred virtual noise.
|
|
The TXREFVNus shall be specified through a set of breakpoints.
|
|
Each breakpoint shall consist of a subcarrier index t, with a subcarrier spacing of 4.3125 kHz,
|
|
and a noise PSD level (expressed in dBm/Hz) at that subcarrier.
|
|
The set of breakpoints can then be represented as: [(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)].
|
|
16 groups can be configured at most, and 3 bytes for each group. The first two bytes represent tone index,
|
|
the 3th byte represents the configured PSD value. The relation between configured PSD value and real PSD
|
|
value is: REAL PSD = (CONFIGURED PSD + 80) * (-0.5dBm/Hz).
|
|
"
|
|
REFERENCE
|
|
"ITU-T G.997.1, paragraph #7.3.1.7.4 (TXREFVNus)"
|
|
::= { hwVOPVirtualNoiseConfProfEntry 5 }
|
|
|
|
hwVOPINMProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPINMConfProfIndex
|
|
when creating entries in the hwVOPINMConfProfTable.
|
|
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPINMConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 19 }
|
|
|
|
hwVOPINMConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPINMConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for
|
|
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
|
|
function on the receive direction in the xTU. A downstream Impulse Noise Monitor applies
|
|
to the xTU-R; an upstream Impulse Noise Monitor applies to the xTU-C.
|
|
If INM is not implemented, the relevant profile pointer within the xDSL Line Configuration
|
|
Vector instance MUST be set to a null value(0).
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPINMConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.7"
|
|
::= { hwVOPProfiles 20 }
|
|
|
|
hwVOPINMConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPINMConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for
|
|
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
|
|
function on the receive direction in the xTU. A downstream Impulse Noise Monitor applies
|
|
to the xTU-R; an upstream Impulse Noise Monitor applies to the xTU-C.
|
|
If INM is not implemented, the relevant profile pointer within the xDSL Line Configuration
|
|
Vector instance MUST be set to a null value(0).
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPINMConfProfIndex.
|
|
"
|
|
INDEX { hwVOPINMConfProfIndex }
|
|
::= { hwVOPINMConfProfTable 1 }
|
|
|
|
HWVOPINMConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPINMConfProfIndex Unsigned32,
|
|
hwVOPINMConfProfRowStatus RowStatus,
|
|
hwVOPINMConfProfDescription OCTET STRING,
|
|
hwVOPINMConfProfInmIatoDs Unsigned32,
|
|
hwVOPINMConfProfInmIatsDs Unsigned32,
|
|
hwVOPINMConfProfInmCcDs Unsigned32,
|
|
hwVOPINMConfProfInmInpeqModeDs Unsigned32,
|
|
hwVOPINMConfProfInmIatoUs Unsigned32,
|
|
hwVOPINMConfProfInmIatsUs Unsigned32,
|
|
hwVOPINMConfProfInmCcUs Unsigned32,
|
|
hwVOPINMConfProfInmInpeqModeUs Unsigned32
|
|
}
|
|
|
|
hwVOPINMConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPINMConfProfIndex identifies a row in the hwVOPINMConfProfTable."
|
|
::= { hwVOPINMConfProfEntry 1 }
|
|
|
|
hwVOPINMConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy'
|
|
or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
|
|
A row in hwVOPINMConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPActSetupVNoiseProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPINMConfProfEntry 2 }
|
|
|
|
hwVOPINMConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPINMConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPINMConfProfEntry 3 }
|
|
|
|
hwVOPINMConfProfInmIatoDs OBJECT-TYPE
|
|
SYNTAX Unsigned32(3..511)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of downstream impulse noise monitoring inter arrival time offset.
|
|
This is the Inter Arrival Time Offset that the xTU receiver shall use to determine
|
|
in which bin of the Inter Arrival Time histogram the IAT is reported.
|
|
The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.1"
|
|
DEFVAL { 3 }
|
|
::= { hwVOPINMConfProfEntry 4 }
|
|
|
|
hwVOPINMConfProfInmIatsDs OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of downstream impulse noise monitoring inter arrival time step.
|
|
This is the Inter Arrival Time Step that the xTU receiver shall use to determine
|
|
in which bin of the Inter Arrival Time histogram the IAT is reported.
|
|
The valid values for INMIATS ranges from 0 to 7 in steps of 1.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.2"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINMConfProfEntry 5 }
|
|
|
|
hwVOPINMConfProfInmCcDs OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of Downstream impulse noise monitoring cluster continuation value.
|
|
This is the Cluster Continuation value that the xTU receiver shall use
|
|
in the cluster indication process described in the relevant ITU-T Recommendation.
|
|
The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.3"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINMConfProfEntry 6 }
|
|
|
|
hwVOPINMConfProfInmInpeqModeDs OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode.
|
|
This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP,
|
|
as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.4"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINMConfProfEntry 7 }
|
|
|
|
hwVOPINMConfProfInmIatoUs OBJECT-TYPE
|
|
SYNTAX Unsigned32(3..511)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of upstream impulse noise monitoring inter arrival time offset.
|
|
This is the Inter Arrival Time Offset that the xTU receiver shall use to determine
|
|
in which bin of the Inter Arrival Time histogram the IAT is reported.
|
|
The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.1"
|
|
DEFVAL { 3 }
|
|
::= { hwVOPINMConfProfEntry 8 }
|
|
|
|
hwVOPINMConfProfInmIatsUs OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of upstream impulse noise monitoring inter arrival time step.
|
|
This is the Inter Arrival Time Step that the xTU receiver shall use to determine
|
|
in which bin of the Inter Arrival Time histogram the IAT is reported.
|
|
The valid values for INMIATS ranges from 0 to 7 in steps of 1.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.2"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINMConfProfEntry 9 }
|
|
|
|
hwVOPINMConfProfInmCcUs OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..64)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of upstream impulse noise monitoring cluster continuation value.
|
|
This is the Cluster Continuation value that the xTU receiver shall use
|
|
in the cluster indication process described in the relevant ITU-T Recommendation.
|
|
The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.3"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINMConfProfEntry 10 }
|
|
|
|
hwVOPINMConfProfInmInpeqModeUs OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter of upstream impulse noise monitoring equivalent impulse noise protect mode.
|
|
This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP,
|
|
as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4.
|
|
"
|
|
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.4"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPINMConfProfEntry 11 }
|
|
|
|
hwVOPSosProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPProfileIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used for hwVOPSosConfProfIndex
|
|
when creating entries in the hwVOPSosConfProfTable.
|
|
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPSosConfProfIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPProfiles 21 }
|
|
|
|
hwVOPSosConfProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPSosConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading
|
|
reduction in a specified part of the frequency spectrum. This can be used in case of sudden
|
|
noise increases. The SOS Profile provides the parameters to configure the optional procedure
|
|
for on-line reconfiguration of the Physical Media Dependent (PMD) sub-layer in VDSL2 operation
|
|
mode. If the SOS procedure is not utilized the relevant profile pointer within the xDSL Line
|
|
Configuration Vector instance MUST be set to a null value (0).
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this table is hwVOPSosConfProfIndex.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-252, paragraph #5.7"
|
|
::= { hwVOPProfiles 22 }
|
|
|
|
hwVOPSosConfProfEntry OBJECT-TYPE
|
|
SYNTAX HWVOPSosConfProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading
|
|
reduction in a specified part of the frequency spectrum. This can be used in case of sudden
|
|
noise increases. The SOS Profile provides the parameters to configure the optional procedure
|
|
for on-line reconfiguration of the Physical Media Dependent (PMD) sub-layer in VDSL2 operation
|
|
mode. If the SOS procedure is not utilized the relevant profile pointer within the xDSL Line
|
|
Configuration Vector instance MUST be set to a null value (0).
|
|
A default profile with an index of '1' will always exist and its parameters will be set to
|
|
vendor-specific values, unless otherwise specified in this document.
|
|
The index of this entry is hwVOPSosConfProfIndex.
|
|
"
|
|
INDEX { hwVOPSosConfProfIndex }
|
|
::= { hwVOPSosConfProfTable 1 }
|
|
|
|
HWVOPSosConfProfEntry ::=
|
|
SEQUENCE {
|
|
hwVOPSosConfProfIndex Unsigned32,
|
|
hwVOPSosConfProfRowStatus RowStatus,
|
|
hwVOPSosConfProfDescription OCTET STRING,
|
|
hwVOPSosConfProfSosTimeDs Unsigned32,
|
|
hwVOPSosConfProfSosTimeUs Unsigned32,
|
|
hwVOPSosConfProfSosNtonesDs Unsigned32,
|
|
hwVOPSosConfProfSosNtonesUs Unsigned32,
|
|
hwVOPSosConfProfSosCrcDs Unsigned32,
|
|
hwVOPSosConfProfSosCrcUs Unsigned32,
|
|
hwVOPSosConfProfMaxSosDs Unsigned32,
|
|
hwVOPSosConfProfMaxSosUs Unsigned32,
|
|
hwVOPSosConfProfSnrmoffsetRocDs Unsigned32,
|
|
hwVOPSosConfProfSnrmoffsetRocUs Unsigned32,
|
|
hwVOPSosConfProfInpminRocDs Unsigned32,
|
|
hwVOPSosConfProfInpminRocUs Unsigned32,
|
|
hwVOPGfastSosConfProfFraTimeDs Unsigned32,
|
|
hwVOPGfastSosConfProfFraTimeUs Unsigned32,
|
|
hwVOPGfastSosConfProfFraNtonesDs Unsigned32,
|
|
hwVOPGfastSosConfProfFraNtonesUs Unsigned32,
|
|
hwVOPGfastSosConfProfFraMinRtxUcDs Unsigned32,
|
|
hwVOPGfastSosConfProfFraMinRtxUcUs Unsigned32,
|
|
hwVOPGfastSosConfProfFraVenDiscDs INTEGER,
|
|
hwVOPGfastSosConfProfFraVenDiscUs INTEGER
|
|
}
|
|
|
|
hwVOPSosConfProfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPSosConfProfIndex identifies a row in the hwVOPSosConfProfTable."
|
|
::= { hwVOPSosConfProfEntry 1 }
|
|
|
|
hwVOPSosConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or to modify or delete an existing row in this table.
|
|
A profile is activated by setting this object to 'active'.
|
|
Before a profile can be deleted or taken out of service (by setting this object to 'destroy'
|
|
or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
|
|
|
|
A row in hwVOPSosConfProfTable is said to be unreferenced when there is no instance of
|
|
hwVOPActSetupSosProfId in the hwVOPActSetupTable which refers to the row.
|
|
"
|
|
::= { hwVOPSosConfProfEntry 2 }
|
|
|
|
hwVOPSosConfProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPSosConfProfDescription contains an optional human readable description for the profile."
|
|
::= { hwVOPSosConfProfEntry 3 }
|
|
|
|
hwVOPSosConfProfSosTimeDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "64ms"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter is used in the specification of the receiver initiated SOS.
|
|
If the value of this parameter is not zero, the standard SOS triggering criteria are enabled,
|
|
and the value corresponds with duration of the time window used in the standard SOS triggering
|
|
criteria in the downstream direction.The special value zero, indicates that the standard SOS
|
|
triggering criteria are disabled. The valid range of non-zero values is from 64 ms to (255*64) ms
|
|
in steps of 64ms.
|
|
Unit: 64ms
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.1"
|
|
::= { hwVOPSosConfProfEntry 4 }
|
|
|
|
hwVOPSosConfProfSosTimeUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "64ms"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter is used in the specification of the receiver initiated SOS.
|
|
If the value of this parameter is not zero, the standard SOS triggering criteria are enabled,
|
|
and the value corresponds with duration of the time window used in the standard SOS triggering
|
|
criteria in the upstream direction.The special value zero, indicates that the standard SOS
|
|
triggering criteria are disabled. The valid range of non-zero values is from 64 ms to (255*64) ms
|
|
in steps of 64ms.
|
|
Unit: 64ms
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.2"
|
|
::= { hwVOPSosConfProfEntry 5 }
|
|
|
|
hwVOPSosConfProfSosNtonesDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET
|
|
that must be degraded in order to arm the first sub-condition of the standard SOS triggering
|
|
criteria in the downstream direction. The parameter SOS-NTONES-ds is defined as a percentage of tones.
|
|
The valid range of values is from 1 to 100 in steps of 1. A special value of 0 indicates that this
|
|
parameter is not used in the decision criteria.
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.3"
|
|
::= { hwVOPSosConfProfEntry 6 }
|
|
|
|
hwVOPSosConfProfSosNtonesUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET
|
|
that must be degraded in order to arm the first sub-condition of the standard SOS triggering
|
|
criteria in the downstream direction. The parameter SOS-NTONES-ds is defined as a percentage of tones.
|
|
The valid range of values is from 1 to 100 in steps of 1. A special value of 0 indicates that this
|
|
parameter is not used in the decision criteria.
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.4"
|
|
::= { hwVOPSosConfProfEntry 7 }
|
|
|
|
hwVOPSosConfProfSosCrcDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "0.02"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds
|
|
seconds in order to arm the second sub-condition of the standard SOS triggering criteria in the
|
|
downstream direction. The valid range of SOS-CRC values is 0.02 to 65535*0.02, in steps of 0.02.
|
|
Unit: 0.02
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.5"
|
|
::= { hwVOPSosConfProfEntry 8 }
|
|
|
|
hwVOPSosConfProfSosCrcUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "0.02"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds
|
|
seconds in order to arm the second sub-condition of the standard SOS triggering criteria in the
|
|
upstream direction. The valid range of SOS-CRC values is 0.02 to 65535*0.02, in steps of 0.02.
|
|
Unit: 0.02
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.6"
|
|
::= { hwVOPSosConfProfEntry 9 }
|
|
|
|
hwVOPSosConfProfMaxSosDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the
|
|
downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition
|
|
to the L3 state. The valid range of values is 1 to 15. A special value of 0 indicates that there is no
|
|
limit on the maximum allowed number of SOS recoveries within this time interval.
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.7"
|
|
::= { hwVOPSosConfProfEntry 10 }
|
|
|
|
hwVOPSosConfProfMaxSosUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the
|
|
upstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition
|
|
to the L3 state. The valid range of values is 1 to 15. A special value of 0 indicates that there is no
|
|
limit on the maximum allowed number of SOS recoveries within this time interval.
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.8"
|
|
::= { hwVOPSosConfProfEntry 11 }
|
|
|
|
hwVOPSosConfProfSnrmoffsetRocDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..310)
|
|
UNITS "0.1dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction.
|
|
The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2).
|
|
The valid range of SNR margin offset values is from 0 to (310*0.1) dB with 0.1 dB steps.
|
|
Unit: 0.1dB
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.9"
|
|
::= { hwVOPSosConfProfEntry 12 }
|
|
|
|
hwVOPSosConfProfSnrmoffsetRocUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..310)
|
|
UNITS "0.1dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction.
|
|
The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2).
|
|
The valid range of SNR margin offset values is from 0 to (310*0.1) dB with 0.1 dB steps.
|
|
Unit: 0.1dB
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.10"
|
|
::= { hwVOPSosConfProfEntry 13 }
|
|
|
|
hwVOPSosConfProfInpminRocDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction.
|
|
The minimum impulse noise protection is an integer ranging from 0 to 16.
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.11"
|
|
::= { hwVOPSosConfProfEntry 14 }
|
|
|
|
hwVOPSosConfProfInpminRocUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..16)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction.
|
|
The minimum impulse noise protection is an integer ranging from 0 to 16.
|
|
"
|
|
REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.12"
|
|
::= { hwVOPSosConfProfEntry 15 }
|
|
|
|
hwVOPGfastSosConfProfFraTimeDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..12)
|
|
UNITS "1 logical frame length"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter is used in the specification of the receiver initiated FRA.
|
|
If the value of this parameter is not zero, the standard FRA triggering criteria are enabled,
|
|
and the value corresponds with duration of the time window used in the standard FRA triggering
|
|
criteria in the downstream direction.The special value zero, indicates that the standard FRA
|
|
triggering criteria are disabled. The valid range of non-zero values is from 1 to 12
|
|
in steps of 1 logical frame length.
|
|
Unit: 1 logical frame length
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 13.3.1.1.1.1"
|
|
DEFVAL { 8 }
|
|
::= { hwVOPSosConfProfEntry 16 }
|
|
|
|
hwVOPGfastSosConfProfFraTimeUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..12)
|
|
UNITS "1 logical frame length"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parameter is used in the specification of the receiver initiated FRA.
|
|
If the value of this parameter is not zero, the standard FRA triggering criteria are enabled,
|
|
and the value corresponds with duration of the time window used in the standard FRA triggering
|
|
criteria in the upstream direction.The special value zero, indicates that the standard FRA
|
|
triggering criteria are disabled. The valid range of non-zero values is from 1 to 12
|
|
in steps of 1 logical frame length.
|
|
Unit: 1 logical frame length
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 13.3.1.1.1.1"
|
|
DEFVAL { 8 }
|
|
::= { hwVOPSosConfProfEntry 17 }
|
|
|
|
hwVOPGfastSosConfProfFraNtonesDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as the minimum percentage of tones that must be degraded in order to arm
|
|
the first sub-condition of the standard FRA triggering criteria in the downstream direction.
|
|
The parameter FRA-NTONES-ds is defined as a percentage of tones.
|
|
The valid range of values is from 1 to 100 in steps of 1. A special value of 0 indicates that this
|
|
parameter is not used in the decision criteria.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 13.3.1.1.1.2"
|
|
DEFVAL { 50 }
|
|
::= { hwVOPSosConfProfEntry 18 }
|
|
|
|
hwVOPGfastSosConfProfFraNtonesUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as the minimum percentage of tones that must be degraded in order to arm
|
|
the first sub-condition of the standard FRA triggering criteria in the downstream direction.
|
|
The parameter FRA-NTONES-us is defined as a percentage of tones.
|
|
The valid range of values is from 1 to 100 in steps of 1. A special value of 0 indicates that this
|
|
parameter is not used in the decision criteria.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 13.3.1.1.1.2"
|
|
DEFVAL { 50 }
|
|
::= { hwVOPSosConfProfEntry 19 }
|
|
|
|
hwVOPGfastSosConfProfFraMinRtxUcDs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1023)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as minimum number of rtx uc anomalies received throughout a time window
|
|
equal to FRA-TIME-ds in order to arm the second FRA triggering criteria in the downstream direction.
|
|
The special value 0 indicates that monitoring of the number of rtx-uc anomalies is disabled.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 13.3.1.1.1.3"
|
|
DEFVAL { 150 }
|
|
::= { hwVOPSosConfProfEntry 20 }
|
|
|
|
hwVOPGfastSosConfProfFraMinRtxUcUs OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1023)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter is defined as the minimum number of rtx uc anomalies received throughout a time window
|
|
equal to FRA-TIME-us in order to arm the second FRA triggering criteria in the upstream direction.
|
|
The special value 0 indicates that monitoring of the number of rtx-uc anomalies is disabled.
|
|
"
|
|
REFERENCE "ITU-T G.9701, paragraph 13.3.1.1.1.3"
|
|
DEFVAL { 150 }
|
|
::= { hwVOPSosConfProfEntry 21 }
|
|
|
|
hwVOPGfastSosConfProfFraVenDiscDs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable vendor discretionary FRA triggering criteria in the downstream direction.
|
|
Options:
|
|
1. disable (1) - Disable vendor discretionary FRA triggering criteria in the downstream direction.
|
|
2. enable (2) - Enable vendor discretionary FRA triggering criteria in the downstream direction.
|
|
"
|
|
DEFVAL { disable }
|
|
::= { hwVOPSosConfProfEntry 22 }
|
|
|
|
hwVOPGfastSosConfProfFraVenDiscUs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable vendor discretionary FRA triggering criteria in the upstream direction.
|
|
Options:
|
|
1. disable (1) - Disable vendor discretionary FRA triggering criteria in the upstream direction.
|
|
2. enable (2) - Enable vendor discretionary FRA triggering criteria in the upstream direction.
|
|
"
|
|
DEFVAL { disable }
|
|
::= { hwVOPSosConfProfEntry 23 }
|
|
|
|
|
|
hwVOPVectors OBJECT IDENTIFIER ::= { hwVOPObjects 2 }
|
|
|
|
|
|
--
|
|
-- This group of parameters controls, on per Network Element level, the methods of attaching Vector Of Profiles (VoP) to xDSL lines
|
|
-- to be used. There are two main managed objects involved. With the first, read only, object the Network Element can indicate the
|
|
-- method(s) it supports. The second, read write, object is used by the management system in order to configure its favorite method.
|
|
--
|
|
-- Modifying the requested attachment method may implies a system reboot. Therefore, there is a third, read only, object
|
|
-- that reflects the currently used VoP attachment method.
|
|
--
|
|
--
|
|
hwVOPGlobal OBJECT IDENTIFIER ::= { hwVOPVectors 1 }
|
|
|
|
|
|
hwVOPGlobalAttachmentMethodCapabilties OBJECT-TYPE
|
|
SYNTAX HWVOPAttachmentMethods
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object reflects the VoP attachment-method(s) this Network Element supports.
|
|
|
|
Two attachment methods, 'direct' and 'indirect' are available and each Network
|
|
Element MAY be able to support both attachment-methods (but not at the same time).
|
|
|
|
The capability to support a specific attachment-method is indicated by the respective
|
|
bit-position set to '1'. Particularly, a network element that supports both methods
|
|
SHOULD indicate that by both bit-positions set to '1'.
|
|
"
|
|
::= { hwVOPGlobal 1 }
|
|
|
|
|
|
hwVOPGlobalAttachmentMethodConfigured OBJECT-TYPE
|
|
SYNTAX HWVOPAttachmentMethods
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the VoP attachment-method to be used by this Network Element.
|
|
Two attachment methods, 'direct' and 'indirect' are available and only one method can be selected at any time.
|
|
To select a specific attachment-method the management system SHOULD set the respective bit-position to '1'.
|
|
Changing the requested attachment-method may implies a system reboot.
|
|
|
|
The value of this object MUST be maintained in a persistent manner.
|
|
|
|
In case the selected attachment-method is not supported by the network element or if the management system tries
|
|
to configure both methods simultaneously the SNMP SET operation SHOULD be rejected by the network element.
|
|
Default value is 1(direct).
|
|
"
|
|
::= { hwVOPGlobal 2 }
|
|
|
|
|
|
hwVOPGlobalAttachmentMethodCurrent OBJECT-TYPE
|
|
SYNTAX HWVOPAttachmentMethods
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object reflects the VoP attachment-method currently used by this Network Element.
|
|
|
|
Two attachment methods, 'direct' and 'indirect' are available and only one method
|
|
can be used at any time. The specific attachment-method used is indicated by the respective bit-position set to '1'.
|
|
|
|
Changing the requested attachment-method may implies a system reboot.
|
|
"
|
|
::= { hwVOPGlobal 3 }
|
|
|
|
|
|
hwVOPSetup OBJECT IDENTIFIER ::= { hwVOPVectors 2 }
|
|
|
|
|
|
hwVOPSetupProfileIndexNext OBJECT-TYPE
|
|
SYNTAX HWVOPSetupIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is required only in case the 'indirect' attachment-method of VoP to xDSL lines is implemented,
|
|
in which case entries/rows in hwVOPSetupTable are dynamically created and deleted by the management system.
|
|
|
|
When implemented, the object reports an appropriate value to be used for hwVOPSetupIndex
|
|
when creating entries in the hwVOPSetupTable.
|
|
|
|
The value '0' indicates that no unassigned entries are available.
|
|
To obtain the value of hwVOPSetupIndex for a new entry in the table,
|
|
the manager issues a management protocol retrieval operation.
|
|
The agent will determine through its local policy when this index value will be made available for reuse.
|
|
"
|
|
::= { hwVOPSetup 1 }
|
|
|
|
|
|
hwVOPSetupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPSetupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a collection of profile indices that construct a Vector Of Profiles (VoP).
|
|
|
|
This table is used in both 'direct' and 'indirect' attachment-methods of VoP to xDSL lines.
|
|
|
|
In case the implementation uses 'direct' attachment-method of configuration VoP to xDSL lines then:
|
|
1) a row in this table is automatically created and deleted by the SNMP agent
|
|
together with creating a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
|
|
2) The row index is same as the index of the respective row in xdsl2LineTable.
|
|
Thus, this table can be considered as extending the xdsl2LineTable.
|
|
3) The row status object (hwVOPSetupRowStatus) and profile description(hwVOPSetupDescription) are unused.
|
|
4) The management system may modify the contents of each row in the table and, by that,
|
|
modify the required configuration VoP for the related xDSL line.
|
|
5) Note that the hwVOPActSetupTable reflects the configuration VoP currently used by each xDSL line.
|
|
Its importance is demonstrated during the time between modifying the configuration VoP
|
|
of any xDSL line and practically applying it to the xDSL line.
|
|
In case the implementation uses 'direct' attachment-method of VoP to xDSL lines then a row in the table
|
|
is automatically created by the SNMP agent when a respective row is created in the xdsl2LineTable.
|
|
The row objects will be set to default values.
|
|
|
|
In case the implementation uses 'indirect' attachment-method of VoP to xDSL lines then a default profile
|
|
with an index number 1 will always exist and its objects will be set to default values.
|
|
The index of this table is hwVOPSetupIndex.
|
|
"
|
|
::= { hwVOPSetup 2 }
|
|
|
|
|
|
hwVOPSetupEntry OBJECT-TYPE
|
|
SYNTAX HWVOPSetupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a collection of profile indices that construct a Vector Of Profiles (VoP).
|
|
|
|
This table is used in both 'direct' and 'indirect' attachment-methods of VoP to xDSL lines.
|
|
|
|
In case the implementation uses 'direct' attachment-method of configuration VoP to xDSL lines then:
|
|
1) a row in this table is automatically created and deleted by the SNMP agent
|
|
together with creating a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
|
|
2) The row index is same as the index of the respective row in xdsl2LineTable.
|
|
Thus, this table can be considered as extending the xdsl2LineTable.
|
|
3) The row status object (hwVOPSetupRowStatus) and profile description(hwVOPSetupDescription) are unused.
|
|
4) The management system may modify the contents of each row in the table and, by that,
|
|
modify the required configuration VoP for the related xDSL line.
|
|
5) Note that the hwVOPActSetupTable reflects the configuration VoP currently used by each xDSL line.
|
|
Its importance is demonstrated during the time between modifying the configuration VoP
|
|
of any xDSL line and practically applying it to the xDSL line.
|
|
In case the implementation uses 'direct' attachment-method of VoP to xDSL lines then a row in the table
|
|
is automatically created by the SNMP agent when a respective row is created in the xdsl2LineTable.
|
|
The row objects will be set to default values.
|
|
|
|
In case the implementation uses 'indirect' attachment-method of VoP to xDSL lines then a default profile
|
|
with an index number 1 will always exist and its objects will be set to default values.
|
|
The index of this entry is hwVOPSetupIndex.
|
|
"
|
|
INDEX { hwVOPSetupIndex }
|
|
::= { hwVOPSetupTable 1 }
|
|
|
|
|
|
HWVOPSetupEntry ::=
|
|
SEQUENCE {
|
|
hwVOPSetupIndex Unsigned32,
|
|
hwVOPSetupRowStatus RowStatus,
|
|
hwVOPSetupDescription OCTET STRING,
|
|
hwVOPSetupUsDataRateProfId1 Unsigned32,
|
|
hwVOPSetupUsRaRatio1 Unsigned32,
|
|
hwVOPSetupDsDataRateProfId1 Unsigned32,
|
|
hwVOPSetupDsRaRatio1 Unsigned32,
|
|
hwVOPSetupInpDelayProfId1 Unsigned32,
|
|
hwVOPSetupUsDataRateProfId2 Unsigned32,
|
|
hwVOPSetupUsRaRatio2 Unsigned32,
|
|
hwVOPSetupDsDataRateProfId2 Unsigned32,
|
|
hwVOPSetupDsRaRatio2 Unsigned32,
|
|
hwVOPSetupInpDelayProfId2 Unsigned32,
|
|
hwVOPSetupUsDataRateProfId3 Unsigned32,
|
|
hwVOPSetupUsRaRatio3 Unsigned32,
|
|
hwVOPSetupDsDataRateProfId3 Unsigned32,
|
|
hwVOPSetupDsRaRatio3 Unsigned32,
|
|
hwVOPSetupInpDelayProfId3 Unsigned32,
|
|
hwVOPSetupUsDataRateProfId4 Unsigned32,
|
|
hwVOPSetupUsRaRatio4 Unsigned32,
|
|
hwVOPSetupDsDataRateProfId4 Unsigned32,
|
|
hwVOPSetupDsRaRatio4 Unsigned32,
|
|
hwVOPSetupInpDelayProfId4 Unsigned32,
|
|
hwVOPSetupLSpectrumProfId Unsigned32,
|
|
hwVOPSetupUpboProfId Unsigned32,
|
|
hwVOPSetupDpboProfId Unsigned32,
|
|
hwVOPSetupRfiProfId Unsigned32,
|
|
hwVOPSetupNoiseMarginProfId Unsigned32,
|
|
hwVOPSetupVNoiseProfId Unsigned32,
|
|
hwVOPSetupInmProfId Unsigned32,
|
|
hwVOPSetupUsDataRateProf1Description OCTET STRING,
|
|
hwVOPSetupDsDataRateProf1Description OCTET STRING,
|
|
hwVOPSetupInpDelayProf1Description OCTET STRING,
|
|
hwVOPSetupUsDataRateProf2Description OCTET STRING,
|
|
hwVOPSetupDsDataRateProf2Description OCTET STRING,
|
|
hwVOPSetupInpDelayProf2Description OCTET STRING,
|
|
hwVOPSetupLSpectrumProfDescription OCTET STRING,
|
|
hwVOPSetupUpboProfDescription OCTET STRING,
|
|
hwVOPSetupDpboProfDescription OCTET STRING,
|
|
hwVOPSetupRfiProfDescription OCTET STRING,
|
|
hwVOPSetupNoiseMarginProfDescription OCTET STRING,
|
|
hwVOPSetupVNoiseProfDescription OCTET STRING,
|
|
hwVOPSetupInmProfDescription OCTET STRING,
|
|
hwVOPSetupSosProfId Unsigned32,
|
|
hwVOPSetupSosProfDescription OCTET STRING
|
|
}
|
|
|
|
|
|
hwVOPSetupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPSetupIndex identifies a row in the hwVOPSetupTable.
|
|
A row in this table may be indexed either by an ifIndex pattern, in case the 'direct'
|
|
attachment-method of VoP to xDSL rows is implemented, or by a unique ordered number,
|
|
in case the 'indirect' attachment-method of VoP to xDSL rows is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 1 }
|
|
|
|
|
|
hwVOPSetupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used, in case the 'indirect' attachment-method of VoP to xDSL lines is implemented,
|
|
to create a new row, to modify a row, or delete an existing row in this table.
|
|
|
|
In case the 'direct' attachment-method of VoP to xDSL lines is implemented then rows in this table
|
|
are automatically created and deleted by the embedded system and this object is not implemented/used.
|
|
|
|
When the object is being used, as described above, rows in this table are dynamically created,
|
|
modified and deleted by the management system.
|
|
|
|
When the object is being used then before a row in this table can be deleted or
|
|
taken out of service (by setting this object to 'destroy' or 'notInService'), it MUST be first
|
|
un-referenced from all associated xDSL lines.
|
|
A row in voSetupTable is said to be not referenced when there is no instance
|
|
of xdsl2LineTable (VDSL2-LINE-MIB) which refers to the row.
|
|
"
|
|
::= { hwVOPSetupEntry 2 }
|
|
|
|
|
|
hwVOPSetupDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPSetupDescription contains an optional human readable description for the profile.
|
|
This object is more likely to be used in case the 'indirect' attachment-method of VoP
|
|
to xDSL lines is implemented.
|
|
|
|
However, if implemented in 'direct' attachment-method of VoP to xDSL lines
|
|
then this object has read-write accessibility.
|
|
"
|
|
::= { hwVOPSetupEntry 3 }
|
|
|
|
|
|
hwVOPSetupUsDataRateProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 4 }
|
|
|
|
|
|
hwVOPSetupUsRaRatio1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #1
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwVOPSetupUsRaRatio1 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 100 }
|
|
::= { hwVOPSetupEntry 5 }
|
|
|
|
|
|
hwVOPSetupDsDataRateProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 2 }
|
|
::= { hwVOPSetupEntry 6 }
|
|
|
|
|
|
hwVOPSetupDsRaRatio1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #1
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwVOPSetupDsRaRatio1 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 100 }
|
|
::= { hwVOPSetupEntry 7 }
|
|
|
|
|
|
hwVOPSetupInpDelayProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 8 }
|
|
|
|
|
|
hwVOPSetupUsDataRateProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 9 }
|
|
|
|
|
|
hwVOPSetupUsRaRatio2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #2
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwVOPSetupUsRaRatio2 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 10 }
|
|
|
|
|
|
hwVOPSetupDsDataRateProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 11 }
|
|
|
|
|
|
hwVOPSetupDsRaRatio2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #2
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwVOPSetupDsRaRatio2 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 12 }
|
|
|
|
|
|
hwVOPSetupInpDelayProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #2.
|
|
If channel #2 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 13 }
|
|
|
|
|
|
hwVOPSetupUsDataRateProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #3.
|
|
If channel #3 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 14 }
|
|
|
|
|
|
hwVOPSetupUsRaRatio3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #3
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPSetupUsRaRatio3 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 15 }
|
|
|
|
|
|
hwVOPSetupDsDataRateProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #3.
|
|
If channel #3 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 16 }
|
|
|
|
|
|
hwVOPSetupDsRaRatio3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #3
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwVOPSetupDsRaRatio3 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 17 }
|
|
|
|
|
|
hwVOPSetupInpDelayProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #3.
|
|
If channel #3 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 18 }
|
|
|
|
|
|
hwVOPSetupUsDataRateProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #4.
|
|
If channel #4 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 19 }
|
|
|
|
|
|
hwVOPSetupUsRaRatio4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #4
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPSetupUsRaRatio4 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 20 }
|
|
|
|
|
|
hwVOPSetupDsDataRateProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #4.
|
|
If channel #4 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 21 }
|
|
|
|
|
|
hwVOPSetupDsRaRatio4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #4
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPSetupDsRaRatio4 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 22 }
|
|
|
|
|
|
hwVOPSetupInpDelayProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #4.
|
|
If channel #4 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwVOPSetupEntry 23 }
|
|
|
|
|
|
hwVOPSetupLSpectrumProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPLineSpectrumConfProfTable used for
|
|
configuring the spectrum parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 24 }
|
|
|
|
|
|
hwVOPSetupUpboProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPUPBOConfProfTable used for
|
|
configuring the upstream power back-off related parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 25 }
|
|
|
|
|
|
hwVOPSetupDpboProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDPBOConfProfTable used for
|
|
configuring the downstream power back-off related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 26 }
|
|
|
|
|
|
hwVOPSetupRfiProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPRFIConfProfTable used for
|
|
configuring the RFI notches related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 27 }
|
|
|
|
|
|
hwVOPSetupNoiseMarginProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSNRMarginConfProfTable used for
|
|
configuring the noise margin related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 28 }
|
|
|
|
|
|
hwVOPSetupVNoiseProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
|
|
configuring the virtual noise related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 29 }
|
|
|
|
hwVOPSetupInmProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINMConfProfTable used for
|
|
configuring the impulse noise monitoring parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 30 }
|
|
|
|
hwVOPSetupUsDataRateProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 31 }
|
|
|
|
hwVOPSetupDsDataRateProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 32 }
|
|
|
|
hwVOPSetupInpDelayProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 33 }
|
|
|
|
hwVOPSetupUsDataRateProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to a zero length string.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 34 }
|
|
|
|
hwVOPSetupDsDataRateProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to a zero length string.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 35 }
|
|
|
|
hwVOPSetupInpDelayProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #2.
|
|
If channel #2 is not being used this object should be set to a zero length string.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 36 }
|
|
|
|
hwVOPSetupLSpectrumProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPLineSpectrumConfProfTable used for
|
|
configuring the spectrum parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 37 }
|
|
|
|
hwVOPSetupUpboProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPUPBOConfProfTable used for
|
|
configuring the upstream power back-off related parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 38 }
|
|
|
|
hwVOPSetupDpboProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDPBOConfProfTable used for
|
|
configuring the downstream power back-off related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 39 }
|
|
|
|
hwVOPSetupRfiProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPRFIConfProfTable used for
|
|
configuring the RFI notches related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 40 }
|
|
|
|
hwVOPSetupNoiseMarginProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSNRMarginConfProfTable used for
|
|
configuring the noise margin related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 41 }
|
|
|
|
hwVOPSetupVNoiseProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
|
|
configuring the virtual noise related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 42 }
|
|
|
|
hwVOPSetupInmProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINMConfProfTable used for
|
|
configuring the impulse noise monitoring parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 43 }
|
|
|
|
hwVOPSetupSosProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSosConfProfTable used for
|
|
configuring the save our showtime parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwVOPSetupEntry 44 }
|
|
|
|
hwVOPSetupSosProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSosConfProfTable used for
|
|
configuring the save our showtime parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwVOPSetupEntry 45 }
|
|
|
|
--
|
|
-- VoP Actual Setup Table
|
|
--
|
|
-- Implementing this table is mandatory, in case of 'direct' attachment-method of VoP to xDSL lines.
|
|
-- It reflects the 'actual' [VoP] configuration of the respective line.
|
|
-- The 'required' configuration for each xDSL line is provided by the row with the same index-value in the hwVOPSetupTable.
|
|
--
|
|
-- The table can optionally be implemented when the 'indirect' attachment-method of VoP to xDSL lines is
|
|
-- implemented. In such case, it is added to reflecting the actual VoP index used by the respective
|
|
-- xDSL line via the xdsl2LineStatusActTemplate object in the line table (xdsl2LineTable).
|
|
--
|
|
hwVOPActSetupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HWVOPActSetupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only table contains groups of profile indices actually attached to any xDSL line in the system.
|
|
Each group of profile indices constructs a Vector Of Profiles (VoP).
|
|
|
|
1) A row in this table is automatically created or deleted by the SNMP agent together
|
|
with creating or deleting a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
|
|
2) The row index is same as the index of the respective row in xdsl2LineTable.
|
|
Thus, this table can be considered as extending the xdsl2LineTable.
|
|
|
|
This table is mandatory in 'direct' attachment-method of VoP to xDSL lines
|
|
but can optionally be implemented in 'indirect' attachment-method.
|
|
The objects in this table reflect the actual configuration VoP of the respective xDSL line.
|
|
|
|
A row in the table is automatically created by the SNMP agent when a respective row is created
|
|
in the xdsl2LineTable. Implementing this table is mandatory in case the implementation
|
|
uses 'direct' attachment-method of VoP to xDSL lines.
|
|
Implementation is optional in case of 'indirect' attachment-method.
|
|
The index of this table is hwVOPActSetupIndex.
|
|
"
|
|
::= { hwVOPSetup 3 }
|
|
|
|
|
|
hwVOPActSetupEntry OBJECT-TYPE
|
|
SYNTAX HWVOPActSetupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only table contains groups of profile indices actually attached to any xDSL line in the system.
|
|
Each group of profile indices constructs a Vector Of Profiles (VoP).
|
|
|
|
1) A row in this table is automatically created or deleted by the SNMP agent together
|
|
with creating or deleting a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
|
|
2) The row index is same as the index of the respective row in xdsl2LineTable.
|
|
Thus, this table can be considered as extending the xdsl2LineTable.
|
|
|
|
This table is mandatory in 'direct' attachment-method of VoP to xDSL lines
|
|
but can optionally be implemented in 'indirect' attachment-method.
|
|
The objects in this table reflect the actual configuration VoP of the respective xDSL line.
|
|
|
|
A row in the table is automatically created by the SNMP agent when a respective row is created
|
|
in the xdsl2LineTable. Implementing this table is mandatory in case the implementation
|
|
uses 'direct' attachment-method of VoP to xDSL lines.
|
|
Implementation is optional in case of 'indirect' attachment-method.
|
|
The index of this entry is hwVOPActSetupIndex.
|
|
"
|
|
INDEX { hwVOPActSetupIndex }
|
|
::= { hwVOPActSetupTable 1 }
|
|
|
|
|
|
HWVOPActSetupEntry ::=
|
|
SEQUENCE {
|
|
hwVOPActSetupIndex Unsigned32,
|
|
hwVOPActSetupUsDataRateProfId1 Unsigned32,
|
|
hwVOPActSetupUsRaRatio1 Unsigned32,
|
|
hwVOPActSetupDsDataRateProfId1 Unsigned32,
|
|
hwVOPActSetupDsRaRatio1 Unsigned32,
|
|
hwVOPActSetupInpDelayProfId1 Unsigned32,
|
|
hwVOPActSetupUsDataRateProfId2 Unsigned32,
|
|
hwVOPActSetupUsRaRatio2 Unsigned32,
|
|
hwVOPActSetupDsDataRateProfId2 Unsigned32,
|
|
hwVOPActSetupDsRaRatio2 Unsigned32,
|
|
hwVOPActSetupInpDelayProfId2 Unsigned32,
|
|
hwVOPActSetupUsDataRateProfId3 Unsigned32,
|
|
hwVOPActSetupUsRaRatio3 Unsigned32,
|
|
hwVOPActSetupDsDataRateProfId3 Unsigned32,
|
|
hwVOPActSetupDsRaRatio3 Unsigned32,
|
|
hwVOPActSetupInpDelayProfId3 Unsigned32,
|
|
hwVOPActSetupUsDataRateProfId4 Unsigned32,
|
|
hwVOPActSetupUsRaRatio4 Unsigned32,
|
|
hwVOPActSetupDsDataRateProfId4 Unsigned32,
|
|
hwVOPActSetupDsRaRatio4 Unsigned32,
|
|
hwVOPActSetupInpDelayProfId4 Unsigned32,
|
|
hwVOPActSetupLSpectrumProfId Unsigned32,
|
|
hwVOPActSetupNoiseMarginProfId Unsigned32,
|
|
hwVOPActSetupVNoiseProfId Unsigned32,
|
|
hwVOPActSetupUpboProfId Unsigned32,
|
|
hwVOPActSetupDpboProfId Unsigned32,
|
|
hwVOPActSetupRfiProfId Unsigned32,
|
|
hwVOPActSetupInmProfId Unsigned32,
|
|
hwVOPActSetupUsDataRateProf1Description OCTET STRING,
|
|
hwVOPActSetupDsDataRateProf1Description OCTET STRING,
|
|
hwVOPActSetupInpDelayProf1Description OCTET STRING,
|
|
hwVOPActSetupUsDataRateProf2Description OCTET STRING,
|
|
hwVOPActSetupDsDataRateProf2Description OCTET STRING,
|
|
hwVOPActSetupInpDelayProf2Description OCTET STRING,
|
|
hwVOPActSetupLSpectrumProfDescription OCTET STRING,
|
|
hwVOPActSetupUpboProfDescription OCTET STRING,
|
|
hwVOPActSetupDpboProfDescription OCTET STRING,
|
|
hwVOPActSetupRfiProfDescription OCTET STRING,
|
|
hwVOPActSetupNoiseMarginProfDescription OCTET STRING,
|
|
hwVOPActSetupVNoiseProfDescription OCTET STRING,
|
|
hwVOPActSetupInmProfDescription OCTET STRING,
|
|
hwVOPActSetupSosProfId Unsigned32,
|
|
hwVOPActSetupSosProfDescription OCTET STRING
|
|
}
|
|
|
|
|
|
hwVOPActSetupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwVOPActSetupIndex identifies a row in this table. A row in this table is indexed by an ifIndex pattern."
|
|
::= { hwVOPActSetupEntry 1 }
|
|
|
|
|
|
hwVOPActSetupUsDataRateProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel number #1.
|
|
"
|
|
::= { hwVOPActSetupEntry 2 }
|
|
|
|
|
|
hwVOPActSetupUsRaRatio1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #1
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupUsRaRatio1 is the ratio of excess data rate assigned to
|
|
all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 3 }
|
|
|
|
|
|
hwVOPActSetupDsDataRateProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
"
|
|
::= { hwVOPActSetupEntry 4 }
|
|
|
|
|
|
hwVOPActSetupDsRaRatio1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #1
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupDsRaRatio1 is the ratio of excess data rate assigned to
|
|
all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 5 }
|
|
|
|
|
|
hwVOPActSetupInpDelayProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #1.
|
|
"
|
|
::= { hwVOPActSetupEntry 6 }
|
|
|
|
|
|
hwVOPActSetupUsDataRateProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 7 }
|
|
|
|
|
|
hwVOPActSetupUsRaRatio2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #2
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupUsRaRatio2 is the ratio of excess data rate assigned to
|
|
all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 8 }
|
|
|
|
|
|
hwVOPActSetupDsDataRateProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 9 }
|
|
|
|
|
|
hwVOPActSetupDsRaRatio2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #2
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupDsRaRatio2 is the ratio of excess data rate assigned to
|
|
all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 10 }
|
|
|
|
|
|
hwVOPActSetupInpDelayProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #2
|
|
If channel #2 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 11 }
|
|
|
|
|
|
hwVOPActSetupUsDataRateProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #3.
|
|
If channel #3 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 12 }
|
|
|
|
|
|
hwVOPActSetupUsRaRatio3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #3
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupUsRaRatio3 is the ratio of excess data rate assigned to
|
|
all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 13 }
|
|
|
|
|
|
hwVOPActSetupDsDataRateProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #3.
|
|
If channel #3 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 14 }
|
|
|
|
|
|
hwVOPActSetupDsRaRatio3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #3
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupDsRaRatio3 is the ratio of excess data rate assigned to
|
|
all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 15 }
|
|
|
|
|
|
hwVOPActSetupInpDelayProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #3
|
|
If channel #3 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 16 }
|
|
|
|
|
|
hwVOPActSetupUsDataRateProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #4.
|
|
If channel #4 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 17 }
|
|
|
|
|
|
hwVOPActSetupUsRaRatio4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #4
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupUsRaRatio4 is the ratio of excess data rate assigned to
|
|
all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 18 }
|
|
|
|
|
|
hwVOPActSetupDsDataRateProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #4.
|
|
If channel #4 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 19 }
|
|
|
|
|
|
hwVOPActSetupDsRaRatio4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that is taken into account for the bearer channel #4
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwVOPActSetupDsRaRatio4 is the ratio of excess data rate assigned to
|
|
all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.
|
|
"
|
|
::= { hwVOPActSetupEntry 20 }
|
|
|
|
|
|
hwVOPActSetupInpDelayProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #4
|
|
If channel #4 is not being used this object is set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 21 }
|
|
|
|
|
|
hwVOPActSetupLSpectrumProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPLineSpectrumConfProfTable used for
|
|
configuring the spectrum parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 22 }
|
|
|
|
|
|
hwVOPActSetupNoiseMarginProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSNRMarginConfProfTable used for
|
|
configuring the noise margin related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 23 }
|
|
|
|
|
|
hwVOPActSetupVNoiseProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
|
|
configuring the virtual noise related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 24 }
|
|
|
|
|
|
hwVOPActSetupUpboProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPUPBOConfProfTable used for
|
|
configuring the upstream power back-off related parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 25 }
|
|
|
|
|
|
hwVOPActSetupDpboProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDPBOConfProfTable used for
|
|
configuring the downstream power back-off related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 26 }
|
|
|
|
|
|
hwVOPActSetupRfiProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPRFIConfProfTable used for
|
|
configuring the RFI notches related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 27 }
|
|
|
|
hwVOPActSetupInmProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINMConfProfTable used for
|
|
configuring the impulse noise monitoring parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 28 }
|
|
|
|
hwVOPActSetupUsDataRateProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel number #1.
|
|
"
|
|
::= { hwVOPActSetupEntry 29 }
|
|
|
|
hwVOPActSetupDsDataRateProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
"
|
|
::= { hwVOPActSetupEntry 30 }
|
|
|
|
hwVOPActSetupInpDelayProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #1.
|
|
"
|
|
::= { hwVOPActSetupEntry 31 }
|
|
|
|
hwVOPActSetupUsDataRateProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
"
|
|
::= { hwVOPActSetupEntry 32 }
|
|
|
|
hwVOPActSetupDsDataRateProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
"
|
|
::= { hwVOPActSetupEntry 33 }
|
|
|
|
hwVOPActSetupInpDelayProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #2
|
|
"
|
|
::= { hwVOPActSetupEntry 34 }
|
|
|
|
hwVOPActSetupLSpectrumProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPLineSpectrumConfProfTable used for
|
|
configuring the spectrum parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 35 }
|
|
|
|
hwVOPActSetupUpboProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPUPBOConfProfTable used for
|
|
configuring the upstream power back-off related parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 36 }
|
|
|
|
hwVOPActSetupDpboProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDPBOConfProfTable used for
|
|
configuring the downstream power back-off related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 37 }
|
|
|
|
hwVOPActSetupRfiProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPRFIConfProfTable used for
|
|
configuring the RFI notches related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 38 }
|
|
|
|
hwVOPActSetupNoiseMarginProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSNRMarginConfProfTable used for
|
|
configuring the noise margin related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 39 }
|
|
|
|
hwVOPActSetupVNoiseProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
|
|
configuring the virtual noise related parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 40 }
|
|
|
|
hwVOPActSetupInmProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINMConfProfTable used for
|
|
configuring the impulse noise monitoring parameters of the respective xDSL line.
|
|
"
|
|
::= { hwVOPActSetupEntry 41 }
|
|
|
|
hwVOPActSetupSosProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSosConfProfTable used for
|
|
configuring the save our showtime parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 42 }
|
|
|
|
hwVOPActSetupSosProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSosConfProfTable used for
|
|
configuring the save our showtime parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
"
|
|
::= { hwVOPActSetupEntry 43 }
|
|
|
|
-- hwOntVdsl2VOPSetupTable
|
|
hwOntVdsl2VOPSetupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwOntVdsl2VOPSetupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a collection of profile indices that construct a Vector Of Profiles (VoP).
|
|
This table is used in both 'direct' and 'indirect' attachment-methods of VoP to xDSL lines.
|
|
|
|
In case the implementation uses 'indirect' attachment-method of VoP to xDSL lines then a default profile
|
|
with an index number 1 will always exist and its objects will be set to default values.
|
|
The indexes of this table are ifIndex, hwVOPOntObjectIndex and hwVOPOntVdsl2Portid.
|
|
"
|
|
REFERENCE
|
|
"Broadband Forum TR-165, paragraph Appendix I"
|
|
::= { hwVOPSetup 4 }
|
|
|
|
hwOntVdsl2VOPSetupEntry OBJECT-TYPE
|
|
SYNTAX HwOntVdsl2VOPSetupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a collection of profile indices that construct a Vector Of Profiles (VoP).
|
|
This table is used in both 'direct' and 'indirect' attachment-methods of VoP to xDSL lines.
|
|
|
|
In case the implementation uses 'indirect' attachment-method of VoP to xDSL lines then a default profile
|
|
with an index number 1 will always exist and its objects will be set to default values.
|
|
The indexes of this entry are ifIndex, hwVOPOntObjectIndex and hwVOPOntVdsl2Portid.
|
|
"
|
|
INDEX { ifIndex,
|
|
hwVOPOntObjectIndex,
|
|
hwVOPOntUniPhyType,
|
|
hwVOPOntVdsl2Portid }
|
|
::= { hwOntVdsl2VOPSetupTable 1 }
|
|
|
|
HwOntVdsl2VOPSetupEntry ::=
|
|
SEQUENCE {
|
|
hwVOPOntObjectIndex Integer32,
|
|
hwVOPOntUniPhyType INTEGER,
|
|
hwVOPOntVdsl2Portid Integer32,
|
|
hwOntVdsl2VOPSetupUsDataRateProfId1 Unsigned32,
|
|
hwOntVdsl2VOPSetupUsRaRatio1 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsDataRateProfId1 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsRaRatio1 Unsigned32,
|
|
hwOntVdsl2VOPSetupInpDelayProfId1 Unsigned32,
|
|
hwOntVdsl2VOPSetupUsDataRateProfId2 Unsigned32,
|
|
hwOntVdsl2VOPSetupUsRaRatio2 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsDataRateProfId2 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsRaRatio2 Unsigned32,
|
|
hwOntVdsl2VOPSetupInpDelayProfId2 Unsigned32,
|
|
hwOntVdsl2VOPSetupUsDataRateProfId3 Unsigned32,
|
|
hwOntVdsl2VOPSetupUsRaRatio3 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsDataRateProfId3 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsRaRatio3 Unsigned32,
|
|
hwOntVdsl2VOPSetupInpDelayProfId3 Unsigned32,
|
|
hwOntVdsl2VOPSetupUsDataRateProfId4 Unsigned32,
|
|
hwOntVdsl2VOPSetupUsRaRatio4 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsDataRateProfId4 Unsigned32,
|
|
hwOntVdsl2VOPSetupDsRaRatio4 Unsigned32,
|
|
hwOntVdsl2VOPSetupInpDelayProfId4 Unsigned32,
|
|
hwOntVdsl2VOPSetupLSpectrumProfId Unsigned32,
|
|
hwOntVdsl2VOPSetupUpboProfId Unsigned32,
|
|
hwOntVdsl2VOPSetupDpboProfId Unsigned32,
|
|
hwOntVdsl2VOPSetupRfiProfId Unsigned32,
|
|
hwOntVdsl2VOPSetupNoiseMarginProfId Unsigned32,
|
|
hwOntVdsl2VOPSetupVNoiseProfId Unsigned32,
|
|
hwOntVdsl2VOPSetupInmProfId Unsigned32,
|
|
hwOntVdsl2VOPLineAdminStatus INTEGER,
|
|
hwOntVdsl2VOPSetupUsDataRateProf1Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupDsDataRateProf1Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupInpDelayProf1Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupUsDataRateProf2Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupDsDataRateProf2Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupInpDelayProf2Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupUsDataRateProf3Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupDsDataRateProf3Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupInpDelayProf3Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupUsDataRateProf4Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupDsDataRateProf4Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupInpDelayProf4Description OCTET STRING,
|
|
hwOntVdsl2VOPSetupLSpectrumProfDescription OCTET STRING,
|
|
hwOntVdsl2VOPSetupUpboProfDescription OCTET STRING,
|
|
hwOntVdsl2VOPSetupDpboProfDescription OCTET STRING,
|
|
hwOntVdsl2VOPSetupRfiProfDescription OCTET STRING,
|
|
hwOntVdsl2VOPSetupNoiseMarginProfDescription OCTET STRING,
|
|
hwOntVdsl2VOPSetupVNoiseProfDescription OCTET STRING,
|
|
hwOntVdsl2VOPSetupInmProfDescription OCTET STRING
|
|
}
|
|
|
|
hwVOPOntObjectIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ONT ID.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 1 }
|
|
|
|
hwVOPOntUniPhyType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
vdsl(37)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the physical type of ONT UNI.
|
|
Options:
|
|
1. vdsl(37) - VDSL
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 2 }
|
|
|
|
hwVOPOntVdsl2Portid OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ONT VDSL port ID.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 3 }
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 4 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUsRaRatio1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #1
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwOntVdsl2VOPSetupUsRaRatio1 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 100 }
|
|
::= { hwOntVdsl2VOPSetupEntry 5 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 2 }
|
|
::= { hwOntVdsl2VOPSetupEntry 6 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsRaRatio1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #1
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwOntVdsl2VOPSetupDsRaRatio1 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 100 }
|
|
::= { hwOntVdsl2VOPSetupEntry 7 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProfId1 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 8 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 9 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUsRaRatio2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #2
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwOntVdsl2VOPSetupUsRaRatio2 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 10 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 11 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsRaRatio2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #2
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwOntVdsl2VOPSetupDsRaRatio2 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 12 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProfId2 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #2.
|
|
If channel #2 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 13 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #3.
|
|
If channel #3 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 14 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUsRaRatio3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #3
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwOntVdsl2VOPSetupUsRaRatio3 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 15 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #3.
|
|
If channel #3 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 16 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsRaRatio3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #3
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
|
|
Also, the 100 - hwOntVdsl2VOPSetupDsRaRatio3 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 17 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProfId3 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #3.
|
|
If channel #3 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 18 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #4.
|
|
If channel #4 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 19 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUsRaRatio4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #4
|
|
when performing rate adaptation on upstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwOntVdsl2VOPSetupUsRaRatio4 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on upstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 20 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #4.
|
|
If channel #4 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 21 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDsRaRatio4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Adaptation Ratio.
|
|
The ratio (in %) that should be taken into account for the bearer channel #4
|
|
when performing rate adaptation on downstream.
|
|
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
|
|
Also, the 100 - hwOntVdsl2VOPSetupDsRaRatio4 is the ratio of excess data rate to
|
|
be assigned to all other bearer channels on downstream direction.
|
|
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 22 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProfId4 OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #4.
|
|
If channel #4 is not being used this object should be set to 0.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwOntVdsl2VOPSetupEntry 23 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupLSpectrumProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPLineSpectrumConfProfTable used for
|
|
configuring the spectrum parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 24 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupUpboProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPUPBOConfProfTable used for
|
|
configuring the upstream power back-off related parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 25 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupDpboProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDPBOConfProfTable used for
|
|
configuring the downstream power back-off related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 26 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupRfiProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPRFIConfProfTable used for
|
|
configuring the RFI notches related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 27 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupNoiseMarginProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSNRMarginConfProfTable used for
|
|
configuring the noise margin related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 28 }
|
|
|
|
|
|
hwOntVdsl2VOPSetupVNoiseProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
|
|
configuring the virtual noise related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 29 }
|
|
|
|
hwOntVdsl2VOPSetupInmProfId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967294)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINMConfProfTable used for
|
|
configuring the impulse noise monitoring parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwOntVdsl2VOPSetupEntry 30 }
|
|
|
|
hwOntVdsl2VOPLineAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the ONT VDSL port.
|
|
Options:
|
|
1. up(1) - indicates up operation.
|
|
2. down(2) - indicates down operation.
|
|
"
|
|
DEFVAL { up }
|
|
::= { hwOntVdsl2VOPSetupEntry 31 }
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 32 }
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 33 }
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProf1Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #1.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 34 }
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to a zero length string.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 35 }
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
If channel #2 is not being used this object should be set to a zero length string.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 36 }
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProf2Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #2.
|
|
If channel #2 is not being used this object should be set to a zero length string.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 37 }
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProf3Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #3.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 38 }
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProf3Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #3.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 39 }
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProf3Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #3.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 40 }
|
|
|
|
hwOntVdsl2VOPSetupUsDataRateProf4Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the upstream transmission direction of channel #4.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 41 }
|
|
|
|
hwOntVdsl2VOPSetupDsDataRateProf4Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDataRateConfProfTable used for
|
|
configuring the downstream transmission direction of channel #4.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 42 }
|
|
|
|
hwOntVdsl2VOPSetupInpDelayProf4Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINPDelayConfProfTable used for
|
|
configuring the INP-Delay parameters of channel #4.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
Currently, only support channel #1 and channel #2, thus this leaf is not supported.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 43 }
|
|
|
|
hwOntVdsl2VOPSetupLSpectrumProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPLineSpectrumConfProfTable used for
|
|
configuring the spectrum parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 44 }
|
|
|
|
hwOntVdsl2VOPSetupUpboProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPUPBOConfProfTable used for
|
|
configuring the upstream power back-off related parameters of the respective xDSL line.
|
|
If this leaf is not support this object should be set to 0.
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 45 }
|
|
|
|
hwOntVdsl2VOPSetupDpboProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPDPBOConfProfTable used for
|
|
configuring the downstream power back-off related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 46 }
|
|
|
|
hwOntVdsl2VOPSetupRfiProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPRFIConfProfTable used for
|
|
configuring the RFI notches related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 47 }
|
|
|
|
hwOntVdsl2VOPSetupNoiseMarginProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPSNRMarginConfProfTable used for
|
|
configuring the noise margin related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 48 }
|
|
|
|
hwOntVdsl2VOPSetupVNoiseProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPVirtualNoiseConfProfTable used for
|
|
configuring the virtual noise related parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 49 }
|
|
|
|
hwOntVdsl2VOPSetupInmProfDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in hwVOPINMConfProfTable used for
|
|
configuring the impulse noise monitoring parameters of the respective xDSL line.
|
|
|
|
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.
|
|
"
|
|
::= { hwOntVdsl2VOPSetupEntry 50 }
|
|
|
|
-- VOP TRAP
|
|
|
|
hwVOPProfileIDChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwConfigChangeIP,
|
|
ifIndex,
|
|
hwVOPDataRateConfProfIndex,
|
|
hwVOPDataRateConfProfDescription,
|
|
hwVOPDataRateConfProfIndex,
|
|
hwVOPDataRateConfProfDescription,
|
|
hwVOPINPDelayConfProfIndex,
|
|
hwVOPINPDelayConfProfDescription,
|
|
hwVOPDataRateConfProfIndex,
|
|
hwVOPDataRateConfProfDescription,
|
|
hwVOPDataRateConfProfIndex,
|
|
hwVOPDataRateConfProfDescription,
|
|
hwVOPINPDelayConfProfIndex,
|
|
hwVOPINPDelayConfProfDescription,
|
|
hwVOPDPBOConfProfIndex,
|
|
hwVOPDPBOConfProfProfDescription,
|
|
hwVOPUPBOConfProfIndex,
|
|
hwVOPUPBOConfProfDescription,
|
|
hwVOPLineSpectrumConfProfIndex,
|
|
hwVOPLineSpectrumConfProfDescription,
|
|
hwVOPRFIConfProfIndex,
|
|
hwVOPRFIConfProfDescription,
|
|
hwVOPSNRMarginConfProfIndex,
|
|
hwVOPSNRMarginConfProfDescription,
|
|
hwVOPVirtualNoiseConfProfIndex,
|
|
hwVOPVirtualNoiseConfProfDescription,
|
|
hwVOPINMConfProfIndex,
|
|
hwVOPINMConfProfDescription,
|
|
hwVOPSosConfProfIndex,
|
|
hwVOPSosConfProfDescription
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The profile ID bound by the port change.
|
|
|
|
1. hwConfigChangeIP -- The serial IP of configuration changes.
|
|
2. ifIndex-the index of the xDSL interface.
|
|
3. hwVOPDataRateConfProfIndex -- the data-rate profile ID used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
4. hwVOPDataRateConfProfDescription-the data-rate profile description used for
|
|
configuring the downstream transmission direction of channel #1.
|
|
5. hwVOPDataRateConfProfIndex -- the data-rate profile ID used for
|
|
configuring the upstream transmission direction of channel #1.
|
|
6. hwVOPDataRateConfProfDescription -- the data-rate profile description used for
|
|
configuring the upstream transmission direction of channel #1.
|
|
7. hwVOPINPDelayConfProfIndex -- the inp-delay profile ID used for configuring the channel #1.
|
|
8. hwVOPINPDelayConfProfDescription -- the inp-delay profile description used for configuring the channel #1.
|
|
9. hwVOPDataRateConfProfIndex -- the data-rate profile ID used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
10.hwVOPDataRateConfProfDescription -- the data-rate profile description used for
|
|
configuring the downstream transmission direction of channel #2.
|
|
11.hwVOPDataRateConfProfIndex -- the data-rate profile ID used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
12.hwVOPDataRateConfProfDescription -- the data-rate profile description used for
|
|
configuring the upstream transmission direction of channel #2.
|
|
13.hwVOPINPDelayConfProfIndex -- the inp-delay profile ID used for configuring the channel #2.
|
|
14.hwVOPINPDelayConfProfDescription -- the inp-delay profile description used for configuring the channel #2.
|
|
15.hwVOPDPBOConfProfIndex -- the dpbo profile ID used for configuring the port.
|
|
16.hwVOPDPBOConfProfProfDescription -- the dpbo profile description used for configuring the port.
|
|
17.hwVOPUPBOConfProfIndex -- the upbo profile ID used for configuring the port.
|
|
18.hwVOPUPBOConfProfDescription -- the upbo profile description used for configuring the port.
|
|
19.hwVOPLineSpectrumConfProfIndex -- the line-spectrum profile ID used for configuring the port.
|
|
20.hwVOPLineSpectrumConfProfDescription -- the line-spectrum profile description used for configuring the port.
|
|
21.hwVOPRFIConfProfIndex -- the rfi profile ID used for configuring the port.
|
|
22.hwVOPRFIConfProfDescription -- the rfi profile description used for configuring the port.
|
|
23.hwVOPSNRMarginConfProfIndex -- the SNR-Margin profile ID used for configuring the port.
|
|
24.hwVOPSNRMarginConfProfDescription -- the SNR-Margin profile description used for configuring the port.
|
|
25.hwVOPVirtualNoiseConfProfIndex -- the virtual noise profile ID used for configuring the port.
|
|
26.hwVOPVirtualNoiseConfProfDescription -- the virtual noise profile description used for configuring the port.
|
|
27.hwVOPINMConfProfIndex -- the inm profile ID used for configuring the port.
|
|
28.hwVOPINMConfProfDescription -- the inm profile description used for configuring the port.
|
|
29.hwVOPSosConfProfIndex -- the sos profile ID used for configuring the port.
|
|
30.hwVOPSosConfProfDescription -- the sos profile description used for configuring the port.
|
|
"
|
|
::= { hwVOPXdslPortTraps 1 }
|
|
|
|
END
|
|
|
|
--
|
|
-- VOP-MIB.mib
|
|
-- |