WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-VOICEPORT-MIB

3713 lines
129 KiB
Plaintext
Raw Permalink Blame History

-- ============================================================================
-- Copyright (C) 2012 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: The entity of voice port's configuration.
-- Reference:
-- Version: V1.29
-- ============================================================================
HUAWEI-VOICEPORT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, private,Integer32, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION
FROM SNMPv2-TC
IpAddress,TimeTicks,Counter32
FROM SNMPv2-SMI
RowStatus,DisplayString
FROM SNMPv2-TC
huaweiUtility
FROM HUAWEI-MIB
hwConfigChangeIP
FROM HUAWEI-DEVICE-MIB;
hwIASVoicePort MODULE-IDENTITY
LAST-UPDATED "201210220000Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"
The entity of voice port's configuration.
"
-- Revision history
REVISION "201210220000Z"
DESCRIPTION "V1.29, change in this revision:
1. Added hwBraPTPActualWorkMode.
2. Added enum(auto) into the hwBraPTPWorkMode.
3. Modified the description of the leaf hwPstnPTPImpedance.
"
REVISION "201209050000Z"
DESCRIPTION "V1.28, change in this revision:
1. Added hwPstnPTPCurrentAdjustFactor.
"
REVISION "201206150000Z"
DESCRIPTION "V1.27, change in this revision:
1. Added hwVoicePstnPortPowerAlarmTrap for alarm.
2. Added hwVoicePstnPortPowerAlarmRestoreTrap for alarm.
"
REVISION "201205080000Z"
DESCRIPTION "V1.26, change in this revision:
1. Added hwPotsBoardToneDefineTable.
2. Added hwVoicePstnBoardSlicLockedTrap for alarm.
3. Added hwVoicePstnBoardSlicUnlockedTrap for alarm.
4. Added hwPstnPTPIdleOffhookTime.
5. Added hwPstnPTPRingOffhookTime.
6. Added hwPstnPTPFskOffhookTime.
"
REVISION "201112012105Z"
DESCRIPTION "V1.25, change in this revision:
--Modified the enums and description of the leaves,including:
hwE1PTPLoopBackState
hwPstnPTPNlpMode
--Modified the description of the leaves,including:
hwPstnPTPProhibit
--Added hwBraPTPActivePeriod
"
REVISION "201108191005Z"
DESCRIPTION "V1.24, change in this revision:
--Added hwPortMask
--Added hwAttributeMask
--Added hwChangepara1
--Added hwChangepara2
--Added hwChangepara3
--Added hwChangepara4
--Added hwChangepara5
--Added hwChangepara6
--Added hwChangepara7
--Added hwChangepara8
--Added hwChangepara9
--Added hwChangepara10
--Added hwChangepara11
--Added hwChangepara12
--Added hwChangepara13
--Added hwChangepara14
--Added hwChangepara15
--Added hwChangepara16
--Added hwIASVoicePortE1AttributeCfgChgTrap
--Added hwIASVoicePortE1AlarmCfgChgTrap
--Added hwIASVoicePortShdslAttributeChgTrap"
REVISION "201011172205Z"
DESCRIPTION "V1.23, change in this revision:
-Modified the description of all tables"
REVISION "201007260000Z"
DESCRIPTION "V1.22, change in this revision:
-Modified the description of all tables"
REVISION "201006300000Z"
DESCRIPTION "V1.21, change in this revision:
-Modified the description of the leaves,including:
hwPstnPTPCurrent
"
REVISION "201006260000Z"
DESCRIPTION "V1.20, change in this revision:
-Corrected the SYNTAX"
REVISION "201007090000Z"
DESCRIPTION "V1.19, added nodes
-Added hwVoicePortSequence
-Added hwVoicePortOperateType
-Added hwVoicePortNum
-Added hwIASVoicePortPstnTrap
-Added hwIASVoicePortBraTrap
-Added hwIASVoicePortE1Trap"
REVISION "201005050000Z"
DESCRIPTION "V1.18, revised the errors"
REVISION "201001270000Z"
DESCRIPTION "V1.17, change in this revision:
-Corrected the SYNTAX
-Added hwE1PTPLineCode into hwE1PTPConfigTable
-Added hwShdslPTPConfigTable
-Added hwShdslPTPOperTable
"
::= { huaweiUtility 113 }
hwIASVoicePortObjects OBJECT IDENTIFIER ::= { hwIASVoicePort 1 }
hwIASVoicePortTrapsVbOids OBJECT IDENTIFIER ::= { hwIASVoicePort 2 }
hwIASVoicePortTraps OBJECT IDENTIFIER ::= { hwIASVoicePort 3 }
hwIASVoicePortCommonTraps OBJECT IDENTIFIER ::= { hwIASVoicePortTraps 1 }
hwIASVoicePortAlarmTraps OBJECT IDENTIFIER ::= { hwIASVoicePortTraps 2 }
hwIASVoicePortComTraps OBJECT IDENTIFIER ::= { hwIASVoicePortCommonTraps 1 }
hwIASVoicePortComAlarmTraps OBJECT IDENTIFIER ::= { hwIASVoicePortAlarmTraps 1 }
hwIASVoicePortPstnTraps OBJECT IDENTIFIER ::= { hwIASVoicePortCommonTraps 2 }
hwIASVoicePortPstnAlarmTraps OBJECT IDENTIFIER ::= { hwIASVoicePortAlarmTraps 2 }
hwIASVoicePortBraTraps OBJECT IDENTIFIER ::= { hwIASVoicePortCommonTraps 3 }
hwIASVoicePortBraAlarmTraps OBJECT IDENTIFIER ::= { hwIASVoicePortAlarmTraps 3 }
hwIASVoicePortE1Traps OBJECT IDENTIFIER ::= { hwIASVoicePortCommonTraps 4 }
hwIASVoicePortE1AlarmTraps OBJECT IDENTIFIER ::= { hwIASVoicePortAlarmTraps 4 }
hwIASVoicePortIsdnL2Traps OBJECT IDENTIFIER ::= { hwIASVoicePortCommonTraps 5}
hwIASVoicePortIsdnL2AlarmTraps OBJECT IDENTIFIER ::= { hwIASVoicePortAlarmTraps 5 }
hwPstnPTPConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPstnPTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
A list of hwPstnPTPConfigEntry objects.
The index of this table is hwPstnPTPIndex.
"
::= { hwIASVoicePortObjects 1 }
hwPstnPTPConfigEntry OBJECT-TYPE
SYNTAX HwPstnPTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
A list of hwPstnPTPConfigEntry objects.
The index of this entry is hwPstnPTPIndex.
"
INDEX {
hwPstnPTPIndex
}
::= { hwPstnPTPConfigTable 1 }
HwPstnPTPConfigEntry ::=
SEQUENCE
{
hwPstnPTPIndex Integer32,
hwPstnPTPSendVoiceGain Integer32,
hwPstnPTPRecvVoiceGain Integer32,
hwPstnPTPDialMode INTEGER,
hwPstnPTPReversePoleEnable INTEGER,
hwPstnPTPReversePoleLevel Integer32,
hwPstnPTPPolarityReverseMode INTEGER,
hwPstnPTPImpedance Integer32,
hwPstnPTPCurrent Integer32,
hwPstnPTPHighLevel Integer32,
hwPstnPTPLowLevel Integer32,
hwPstnPTPKCType INTEGER,
hwPstnPTPVoltage INTEGER,
hwPstnPTPActualSendGain Integer32,
hwPstnPTPActualRecvGain Integer32,
hwPstnPTPConfigState INTEGER,
hwPstnPTPLineLock INTEGER,
hwPstnPTPNlpMode INTEGER,
hwPstnPTPClipReversePole INTEGER,
hwPstnPTPPulsePeriodUpper Integer32,
hwPstnPTPPulsePeriodLower Integer32,
hwPstnPTPPulseDurationUpper Integer32,
hwPstnPTPPulseDurationLower Integer32,
hwPstnPTPPulsePauseUpper Integer32,
hwPstnPTPPulsePauseLower Integer32,
hwPstnPTPProhibit INTEGER,
hwPstnPTPIdleOffhookTime Integer32,
hwPstnPTPRingOffhookTime Integer32,
hwPstnPTPFskOffhookTime Integer32,
hwPstnPTPCurrentAdjustFactor Integer32
}
hwPstnPTPIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwPstnPTPConfigEntry 1 }
hwPstnPTPSendVoiceGain OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the transmit gain (dB).
1: 5 dB
2: 4.5 dB
3: 4 dB
4: 3.5 dB
5: 3 dB
6: 2.5 dB
7: 2 dB
8: 1.5 dB
9: 1 dB
10: 0.5 dB
11: 0 dB
12: -0.5 dB
13: -1 dB
14: -1.5 dB
15: -2 dB
16: -2.5 dB
17: -3 dB
18: -3.5 dB
19: -4 dB
20: -4.5 dB
21: -5 dB
22: -5.5 dB
23: -6 dB
255: auto gain control
"
DEFVAL { 11 }
::= { hwPstnPTPConfigEntry 2 }
hwPstnPTPRecvVoiceGain OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the receive gain (dB).
1: 0 dB
2: -0.5 dB
3: -1 dB
4: -1.5 dB
5: -2 dB
6: -2.5 dB
7: -3 dB
8: -3.5 dB
9: -4 dB
10: -4.5 dB
11: -5 dB
12: -5.5 dB
13: -6 dB
14: -6.5 dB
15: -7 dB
16: -7.5 dB
17: -8 dB
18: -8.5 dB
19: -9 dB
20: -9.5 dB
21: -10 dB
22: -10.5 dB
23: -11 dB
24: -11.5 dB
25: -12 dB
255 :agc
"
DEFVAL { 15 }
::= { hwPstnPTPConfigEntry 3 }
hwPstnPTPDialMode OBJECT-TYPE
SYNTAX INTEGER{modeDtmfPulseBoth(1),modeDtmfOnly(2),modePulseOnly(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the dialing mode.
Options:
1.modeDtmfPulseBoth(1) -indicates the dial mode are both pulse and DTMF
2.modeDtmfOnly(2) -indicates the dial mode is only DTMF
3.modePulseOnly(3) -indicates the dial mode is only pulse
"
DEFVAL { modeDtmfPulseBoth }
::= { hwPstnPTPConfigEntry 4 }
hwPstnPTPReversePoleEnable OBJECT-TYPE
SYNTAX INTEGER{reversePoleDisable(1),reversePoleEnable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether to support the polarity-reversing pulse.
Options:
1.reversePoleDisable(1) -indicates the reverse pole is disable
2.reversePoleEnable(2) -indicates the reverse pole is enable
"
DEFVAL { reversePoleEnable }
::= { hwPstnPTPConfigEntry 5 }
hwPstnPTPReversePoleLevel OBJECT-TYPE
SYNTAX Integer32(20..1270)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the level width of the polarity-reversing pulse (unit: ms). Step: 10 ms.
"
DEFVAL { 100 }
::= { hwPstnPTPConfigEntry 6 }
hwPstnPTPPolarityReverseMode OBJECT-TYPE
SYNTAX INTEGER{hardReversePole(1),softReversePole(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The polarity reversal mode.
Options:
1.hardReversePole(1) -Indicates the polarity reversal mode is hard polarity reversal
2.softReversePole(2) -Indicates the polarity reversal mode is soft polarity reversal
"
DEFVAL { hardReversePole }
::= { hwPstnPTPConfigEntry 7 }
hwPstnPTPImpedance OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Port impedance of the port. The following values indicates different impedance with
different application circumstances.
1 -- Bureau machine in China(200+680|| 100nf)
2 -- User Machine in China(200+560|| 100nf)
3 -- 600<30><30>Interface
4 -- Interface of russian(150+510|| 47nf)
5 -- (220+820|| 115nf )
6 -- (220+820|| 120nf )
7 -- 900<30><30> Interface
8 -- Interface of Brazil(800|| 50nf)
9 -- Abandoned
10 -- HK_BT3(Zin=370+620|| 310nf,Zload=600)
11 -- HK_BT5(Zin=270+264|| 357nf+1434|| 265nf,Zload=600)
12 -- BT1(Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF)
13 -- BT2(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(270 +264 //357nF+1434 //265nF))
14 -- BT3(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF))
15 -- Commonly used in Europe(Zin= 270+750|| 150nf)
16 -- New zealand (Zin=370+620|| 310nf)
Indicates the port impedance of the board.Each value corresponds to the required impedance in a specified scenario.
1 -- Bureau machine in China (200+680|| 100nf)
2 -- User machine in China (200+560|| 100nf)
3 -- 600-ohm interface
4 -- Interface of Russia (150+510|| 47nf)
5 -- (220+820|| 115nf )
6 -- (220+820|| 120nf )
7 -- 900-ohm interface
8 - Interface of Brazil (800|| 50nf)
9 -- Abandoned
10 -- HK_BT3(Zin=370+620|| 310nf,Zload=600)
11 -- HK_BT5(Zin=270+264|| 357nf+1434|| 265nf,Zload=600)
12 -- BT1(Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF)
13 -- BT2(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(270 +264 //357nF+1434 //265nF))
14 -- BT3(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF))
15 -- Commonly used in Europe (Zin= 270+750|| 150nf)
16 -- New zealand (Zin=370+620|| 310nf)
"
DEFVAL { 3 }
::= { hwPstnPTPConfigEntry 8 }
hwPstnPTPCurrent OBJECT-TYPE
SYNTAX Integer32(1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Port current supported by the board. The value ranges from 1 to 7,
which indicates the port current value(the maximum number of the ports with the current of
35mA ,40mA and 45mA is 5) .
1: 16mA
2: 20mA
3: 25mA
4: 30mA
5: 35mA
6: 40mA
7: 45mA
"
DEFVAL { 3 }
::= { hwPstnPTPConfigEntry 9 }
hwPstnPTPHighLevel OBJECT-TYPE
SYNTAX Integer32(20..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the high level width of the 16KC (unit: ms).
"
DEFVAL { 100 }
::= { hwPstnPTPConfigEntry 10 }
hwPstnPTPLowLevel OBJECT-TYPE
SYNTAX Integer32(20..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the low level width of the 16KC (unit: ms).
"
DEFVAL { 300 }
::= { hwPstnPTPConfigEntry 11 }
hwPstnPTPKCType OBJECT-TYPE
SYNTAX INTEGER{port1216kcSelector16kc(1),port1216kcSelector12kc(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the 12KC/16KC type.
Options:
1.port1216kcSelector16kc(1) -indicates the 16kc
2.port1216kcSelector12kc(2) -indicates the 12kc
"
DEFVAL { port1216kcselector16kc }
::= { hwPstnPTPConfigEntry 12 }
hwPstnPTPVoltage OBJECT-TYPE
SYNTAX INTEGER{port1216kcValidVoltage0(1),
port1216kcValidVoltage1(2),
port1216kcValidVoltage2(3),
port1216kcValidVoltage3(4),
port1216kcValidVoltage4(5),
port1216kcValidVoltage5(6),
port1216kcValidVoltage6(7),
port1216kcValidVoltage7(8),
port1216kcValidVoltage8(9),
port1216kcValidVoltage9(10)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the valid level of the 12KC/16KC.
Options:
1.port1216kcValidVoltage0(1) -indicates 0.45 Vrms
2.port1216kcValidVoltage1(2) -indicates 0.775 Vrms
3.port1216kcValidVoltage2(3) -indicates 1.0 Vrms
4.port1216kcValidVoltage3(4) -indicates 1.5 Vrms
5.port1216kcValidVoltage4(5) -indicates 2.0 Vrms
6.port1216kcValidVoltage5(6) -indicates 2.5 Vrms
7.port1216kcValidVoltage6(7) -indicates 3.0 Vrms
8.port1216kcValidVoltage7(8) -indicates 3.5 Vrms
9.port1216kcValidVoltage8(9) -indicates 4.0 Vrms
10.port1216kcValidVoltage9(10) -indicates 4.5 Vrms
"
DEFVAL { 6 }
::= { hwPstnPTPConfigEntry 13 }
hwPstnPTPActualSendGain OBJECT-TYPE
SYNTAX Integer32(-1|1..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the actual transmit gain of the port.
-1: invalid value
1: 5 dB
2: 4.5 dB
3: 4 dB
4: 3.5 dB
5: 3 dB
6: 2.5 dB
7: 2 dB
8: 1.5 dB
9: 1 dB
10: 0.5 dB
11: 0 dB
12: -0.5 dB
13: -1 dB
14: -1.5 dB
15: -2 dB
16: -2.5 dB
17: -3 dB
18: -3.5 dB
19: -4 dB
20: -4.5 dB
21: -5 dB
22: -5.5 dB
23: -6 dB
"
::= { hwPstnPTPConfigEntry 14 }
hwPstnPTPActualRecvGain OBJECT-TYPE
SYNTAX Integer32(-1|1..25)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the actual receive gain of the port.
-1: invalid value
1: 0 dB
2: -0.5 dB
3: -1 dB
4: -1.5 dB
5: -2 dB
6: -2.5 dB
7: -3 dB
8: -3.5 dB
9: -4 dB
10: -4.5 dB
11: -5 dB
12: -5.5 dB
13: -6 dB
14: -6.5 dB
15: -7 dB
16: -7.5 dB
17: -8 dB
18: -8.5 dB
19: -9 dB
20: -9.5 dB
21: -10 dB
22: -10.5 dB
23: -11 dB
24: -11.5 dB
25: -12 dB
"
::= { hwPstnPTPConfigEntry 15 }
hwPstnPTPConfigState OBJECT-TYPE
SYNTAX INTEGER{notConfigUserType(1),configUserType(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the configuration status of the subscriber type. 1-Not configured; 2-Configured.
Options:
1.notConfigUserType(1) -not configured
2.configUserType(2) -configured
"
::= { hwPstnPTPConfigEntry 16 }
hwPstnPTPLineLock OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates support lock port or not
Options:
1.enable(1) -support the lock of the port
2.disable(2) -not support the lock of the port
"
DEFVAL { enable }
::= { hwPstnPTPConfigEntry 17 }
hwPstnPTPNlpMode OBJECT-TYPE
SYNTAX INTEGER{normalMode(1),ecgainMode(2),increasedMode(3),reducedMode(4),close(5),dtmfEcMode(6)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the Nlp mode of the port.
Options:
1.normalMode(1) -indicates enable the function of non-linear process for echo control performance in default level
2.ecgainMode(2) -indicates enable the function to config the gain value for ec with the non-linear process
3.increasedMode(3) -indicates For certain 2-to-4 wire hybrid or line conditions where a larger than normal non-linear
component in the echo is present,setting for an increased level of NLP engagement
in order to provide an adequate echo control performance
4.reducedMode(4) -indicates For applications where the default NLP level causes unpleasant voice artifacts (like choppiness
at the beginning of the call in heavy double talk situations), the Host may select the NLP Tune
setting to reduce the level of NLP engagement
5.close(5) -indicates disable the function of non-linear process for echo control performance
6.dtmfEcMode(6) -indicates DTMF echo elimination
"
DEFVAL { 1 }
::= { hwPstnPTPConfigEntry 18 }
hwPstnPTPClipReversePole OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether to support the polarity-reversing pulse when Clip.
Options:
1.enable(1) -support the polarity-reversing pulse
2.disable(2) -not support the polarity-reversing pulse
"
DEFVAL { disable }
::= { hwPstnPTPConfigEntry 19 }
hwPstnPTPPulsePeriodUpper OBJECT-TYPE
SYNTAX Integer32(20..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the upper limit of the pulse period (unit: ms).
"
DEFVAL { 200 }
::= { hwPstnPTPConfigEntry 20 }
hwPstnPTPPulsePeriodLower OBJECT-TYPE
SYNTAX Integer32(20..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the lower limit of the pulse period
Unit: ms
"
DEFVAL { 50 }
::= { hwPstnPTPConfigEntry 21 }
hwPstnPTPPulseDurationUpper OBJECT-TYPE
SYNTAX Integer32(20..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the upper limit of the pulse duration (unit: ms).
"
DEFVAL { 90 }
::= { hwPstnPTPConfigEntry 22 }
hwPstnPTPPulseDurationLower OBJECT-TYPE
SYNTAX Integer32(20..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the lower limit of the pulse duration (unit: ms).
"
DEFVAL { 30 }
::= { hwPstnPTPConfigEntry 23 }
hwPstnPTPPulsePauseUpper OBJECT-TYPE
SYNTAX Integer32(20..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the upper limit of the pulse pause (unit: ms).
"
DEFVAL { 90 }
::= { hwPstnPTPConfigEntry 24 }
hwPstnPTPPulsePauseLower OBJECT-TYPE
SYNTAX Integer32(20..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the lower limit of the pulse pause (unit: ms).
"
DEFVAL { 30 }
::= { hwPstnPTPConfigEntry 25 }
hwPstnPTPProhibit OBJECT-TYPE
SYNTAX INTEGER{disable(1),enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether to prohibit the PSTN port.
Options:
1.disable(1) -indicates that the PSTN port is unprohibited
2.enable(2) -indicates that the PSTN port is prohibited
"
DEFVAL { disable }
::= { hwPstnPTPConfigEntry 26 }
hwPstnPTPIdleOffhookTime OBJECT-TYPE
SYNTAX Integer32(5..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the caller offhook recognised time (unit: 10ms).
If the subscriber's A/B lines were detected in short circuit longer than this time as a caller party,
MG will report offhook message.
"
DEFVAL { 8 }
::= { hwPstnPTPConfigEntry 27 }
hwPstnPTPRingOffhookTime OBJECT-TYPE
SYNTAX Integer32(5..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the callee offhook recognised time during ringing (unit: 10ms).
While the subscriber was ringing as a callee party, if the A/B lines were detected in short circuit longer
than this time, MG will report offhook message.
"
DEFVAL { 20 }
::= { hwPstnPTPConfigEntry 28 }
hwPstnPTPFskOffhookTime OBJECT-TYPE
SYNTAX Integer32(5..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the callee offhook recognised time during onhook data transmission (unit: 10ms).
While the subscriber was called but not ringing, if the A/B lines were detected in short circuit longer
than this time, MG will report offhook message.
"
DEFVAL { 5 }
::= { hwPstnPTPConfigEntry 29 }
hwPstnPTPCurrentAdjustFactor OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the adjustive speed of the DC output voltage.
"
DEFVAL { 100 }
::= { hwPstnPTPConfigEntry 30 }
hwPstnPTPOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPstnPTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the PSTN PTP layer.
The index of this table is hwPstnPTPOperIndex.
"
::= { hwIASVoicePortObjects 2 }
hwPstnPTPOperEntry OBJECT-TYPE
SYNTAX HwPstnPTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the PSTN PTP layer.
The index of this entry is hwPstnPTPOperIndex.
"
INDEX {
hwPstnPTPOperIndex
}
::= { hwPstnPTPOperTable 1 }
HwPstnPTPOperEntry ::=
SEQUENCE
{
hwPstnPTPOperIndex Integer32,
hwPstnPTPSrvState INTEGER,
hwPstnPTPLoopBackState INTEGER,
hwPstnPTPTestState INTEGER,
hwPstnPTPAdminOper INTEGER,
hwPstnPTPSrvStateChange TimeTicks,
hwPstnPTPLoopBackStateChange TimeTicks,
hwPstnPTPTestStateChange TimeTicks,
hwPstnPTPLicenseState INTEGER,
hwPstnPTPLineState INTEGER
}
hwPstnPTPOperIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwPstnPTPOperEntry 1 }
hwPstnPTPSrvState OBJECT-TYPE
SYNTAX INTEGER{normal(1),fault(2),deactive(3),powerdeny(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PSTN port physic state:
Options:
1.normal(1) -indicates the PSTN port physic state is normal
2.fault(2) -indicates the PSTN port physic state is fault
3.deactive(3) -indicates the PSTN port physic state is deactive
4.powerdeny(4) -indicates the PSTN port physic state is powerdeny
"
::= { hwPstnPTPOperEntry 2 }
hwPstnPTPLoopBackState OBJECT-TYPE
SYNTAX INTEGER{noLoop(1),remoteLoop(2),localLoop(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PSTN port loop state:
Options:
1.noLoop(1) -indicates the PSTN port loop state is no loop
2.remoteLoop(2) -indicates the PSTN port loop state is remote loop
3.localLoop(3) -indicates the PSTN port loop state is local loop
"
::= { hwPstnPTPOperEntry 3 }
hwPstnPTPTestState OBJECT-TYPE
SYNTAX INTEGER{noTest(1),test(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PSTN port test state:
Options:
1.noTest(1) -indicates that there is no test on the PSTN port
2.test(2) -indicates that there is a test on the PSTN port
"
::= { hwPstnPTPOperEntry 4 }
hwPstnPTPAdminOper OBJECT-TYPE
SYNTAX INTEGER{reset(1),localLoop(2),remoteLoop(3),cancelLoop(4),clearLineFault(5),invalidvalue(-1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the maintenance operation of the physical layer of the PSTN port.
Options:
1.reset(1) -indicates the maintenance operation is reset
2.localLoop(2) -indicates the maintenance operation is local loop
3.remoteLoop(3) -indicates the maintenance operation is remote loop
4.cancelLoop(4) -indicates the maintenance operation is cancel loop
5.clearLineFault(5) -indicates the maintenance operation is clear line fault
6.invalidvalue(-1) -indicates an invalid value.
"
::= { hwPstnPTPOperEntry 5 }
hwPstnPTPSrvStateChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service running status changing time of the PSTN port.
"
::= { hwPstnPTPOperEntry 6 }
hwPstnPTPLoopBackStateChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the physical loopback status changing time of the PSTN port.
"
::= { hwPstnPTPOperEntry 7 }
hwPstnPTPTestStateChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the physical test status changing time of the PSTN port.
"
::= { hwPstnPTPOperEntry 8 }
hwPstnPTPLicenseState OBJECT-TYPE
SYNTAX INTEGER{noConfigure(1),noLicense(2),licensed(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service license status of the PSTN port.
Options:
1.noConfigure(1) -indicates the service license status of the PSTN port is no configuration
2.noLicense(2) -indicates the service license status of the PSTN port is no license
3.licensed(3) -indicates the service license status of the PSTN port is licensed
"
::= { hwPstnPTPOperEntry 9 }
hwPstnPTPLineState OBJECT-TYPE
SYNTAX INTEGER{normal(1),onEarth(2),unknown(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PSTN port line state:
Options:
1.normal(1) -indicates that the state of PSTN port line is normal
2.onEarth(2) -indicates that the state of PSTN port line on earth
3.unknown(3) -indicates that the state of PSTN port line is unknown
"
::= { hwPstnPTPOperEntry 10 }
hwBraPTPConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBraPTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the physical attribute configuration table of the BRA port.
The index of this table is hwBraPTPIndex.
"
::= { hwIASVoicePortObjects 3 }
hwBraPTPConfigEntry OBJECT-TYPE
SYNTAX HwBraPTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the physical attribute configuration table of the BRA port.
The index of this entry is hwBraPTPIndex.
"
INDEX {
hwBraPTPIndex
}
::= { hwBraPTPConfigTable 1 }
HwBraPTPConfigEntry ::=
SEQUENCE
{
hwBraPTPIndex Integer32,
hwBraPTPRPower INTEGER,
hwBraPTPAutoDeactive INTEGER,
hwBraPTPAutoDeactiveDelay Integer32,
hwBraPTPWorkMode INTEGER,
hwBraPTPPowerState INTEGER,
hwBraPTPConfigState INTEGER,
hwBraPTPL1ActiveMode INTEGER,
hwBraPTPUniAlarmReport INTEGER,
hwBraPTPL2Monitor INTEGER,
hwBraPTPActivePeriod Integer32,
hwBraPTPActualWorkMode INTEGER
}
hwBraPTPIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwBraPTPConfigEntry 1 }
hwBraPTPRPower OBJECT-TYPE
SYNTAX INTEGER{disable(1), enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether remote power supply is supported. 1-Not supported; 2-Supported.
Options:
1.disable(1) -not support remote power supply
2.enable(2) -support remote power supply
"
DEFVAL { disable }
::= { hwBraPTPConfigEntry 2 }
hwBraPTPAutoDeactive OBJECT-TYPE
SYNTAX INTEGER{disable(1), enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates whether automatic deactivation is supported. 1-Not supported; 2-Supported.
Options:
1.disable(1) -not support automatic deactivation
2.enable(2) -support automatic deactivation
"
DEFVAL { disable }
::= { hwBraPTPConfigEntry 3 }
hwBraPTPAutoDeactiveDelay OBJECT-TYPE
SYNTAX Integer32(10..360)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the automatic deactivation delay of the BRA (unit: second).
"
DEFVAL { 30 }
::= { hwBraPTPConfigEntry 4 }
hwBraPTPWorkMode OBJECT-TYPE
SYNTAX INTEGER{p2mp(1), p2p(2), auto(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the BRA port working mode.
Options:
1.p2mp(1) -indicates Point to multi-point
2.p2p(2) -indicates Point to point
3.auto(3) -indicates the adaptive manner, the result of consultation may be p2mp or p2p
"
DEFVAL { p2mp }
::= { hwBraPTPConfigEntry 5 }
hwBraPTPPowerState OBJECT-TYPE
SYNTAX INTEGER{state1(1),state2(2),state3(3),state4(4),invalidvalue(-1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the power status of the NT1. 1-Active power supply (PS1); 2-Standby power supply (PS2).
Options:
1.state1(1) -indicates PS1 is normal; PS2 is normal
2.state2(2) -indicates PS1 is normal; PS2 is abnormal
3.state3(3) -indicates PS1 is abnormal; PS2 is normal
4.state4(4) -indicates PS1 is abnormal; PS2 is abnormal
5.invalidvalue(-1) -indicates an invalid value.
"
::= { hwBraPTPConfigEntry 6 }
hwBraPTPConfigState OBJECT-TYPE
SYNTAX INTEGER{notConfigUserType(1),configUserType(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the configuration status of the subscriber type.
Options:
1.notConfigUserType(1) -not configured
2.configUserType(2) -configured
"
::= { hwBraPTPConfigEntry 7}
hwBraPTPL1ActiveMode OBJECT-TYPE
SYNTAX INTEGER{stableActive(1),unstableActive(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates layer 1 active mode of bra port.
Options:
1.stableActive(1) -indicates the layer 1 active mode of bra port is stable active
2.unstableActive(2) -indicates the layer 1 active mode of bra port is unstable active
"
::= { hwBraPTPConfigEntry 8}
hwBraPTPUniAlarmReport OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates enable user network interface fault alarm or not.
Options:
1.enable(1) -indicates enable the user network interface fault alarm
2.disable(2) -indicates disable the user network interface fault alarm
Default: disable(2)
"
::= { hwBraPTPConfigEntry 9}
hwBraPTPL2Monitor OBJECT-TYPE
SYNTAX INTEGER{disable(1),enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates enable layer 2 error statistic of bra port or not.
Options:
1.disable(1) -indicates disable the layer 2 error statistic of bra port
2.enable(2) -indicates enable the layer 2 error statistic of bra port
Default:disable(2)
"
::= { hwBraPTPConfigEntry 10}
hwBraPTPActivePeriod OBJECT-TYPE
SYNTAX Integer32(0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the interval of the periodical automatic activation. 0 means that periodical automatic activation is disabled (unit: minutes).
"
DEFVAL { 0 }
::= { hwBraPTPConfigEntry 11 }
hwBraPTPActualWorkMode OBJECT-TYPE
SYNTAX INTEGER{p2mp(1),p2p(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the BRA port actual working mode.
Options:
1.p2mp(1) -indicates Point to multi-point
2.p2p(2) -indicates Point to point
"
::= { hwBraPTPConfigEntry 12}
hwBraPTPOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBraPTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the BRA PTP layer.
The index of this table is hwBraPTPOperIndex.
"
::= { hwIASVoicePortObjects 4 }
hwBraPTPOperEntry OBJECT-TYPE
SYNTAX HwBraPTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the BRA PTP layer.
The index of this entry is hwBraPTPOperIndex.
"
INDEX {
hwBraPTPOperIndex
}
::= { hwBraPTPOperTable 1 }
HwBraPTPOperEntry ::=
SEQUENCE
{
hwBraPTPOperIndex Integer32,
hwBraPTPSrvState INTEGER,
hwBraPTPLoopBackState INTEGER,
hwBraPTPTestState INTEGER,
hwBraPTPAdminOper INTEGER,
hwBraPTPSrvStateChange TimeTicks,
hwBraPTPLoopBackStateChange TimeTicks,
hwBraPTPTestStateChange TimeTicks,
hwBraPTPLicenseState INTEGER,
hwBraPTPAlarmState BITS
}
hwBraPTPOperIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwBraPTPOperEntry 1 }
hwBraPTPSrvState OBJECT-TYPE
SYNTAX INTEGER{normal(1),fault(2),deactive(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service running status of the BRA port.
Options:
1.normal(1) -indicates the service running status of the BRA port is normal
2.fault(2) -indicates the service running status of the BRA port is fault
3.deactive(3) -indicates the service running status of the BRA port is deactive
"
::= { hwBraPTPOperEntry 2 }
hwBraPTPLoopBackState OBJECT-TYPE
SYNTAX INTEGER{noLoop(1),remoteLoop(2),localLoop(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the physical loopback status of the BRA port.
Options:
1.noLoop(1) -indicates the loopback status is no loop
2.remoteLoop(2) -indicates the loopback status is remote loop
3.localLoop(3) -indicates the loopback status is local loop
"
::= { hwBraPTPOperEntry 3 }
hwBraPTPTestState OBJECT-TYPE
SYNTAX INTEGER{noTest(1),test(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the test status of the BRA port.
Options:
1.noTest(1) -indicates there is no test
2.test(2) -indicates there is a test
"
::= { hwBraPTPOperEntry 4 }
hwBraPTPAdminOper OBJECT-TYPE
SYNTAX INTEGER{reset(1),localLoop(2),remoteLoop(3),cancelLoop(4),active(5),deactive(6),invalidvalue(-1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the maintenance operation of the physical layer of the BRA port.
Options:
1.reset(1) -indicates the maintenance operation is reset
2.localLoop(2) -indicates the maintenance operation is local loop
3.remoteLoop(3) -indicates the maintenance operation is remote loop
4.cancelLoop(4) -indicates the maintenance operation is no loop
5.active(5) -indicates the maintenance operation is active
6.deactive(6) -indicates the maintenance operation is deactive
7.invalidvalue(-1) -indicates an invalid value.
"
::= { hwBraPTPOperEntry 5 }
hwBraPTPSrvStateChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service running status changing time of the BRA port.
"
::= { hwBraPTPOperEntry 6 }
hwBraPTPLoopBackStateChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the loopback status changing time of the BRA port.
"
::= { hwBraPTPOperEntry 7 }
hwBraPTPTestStateChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the test status changing time of the BRA port.
"
::= { hwBraPTPOperEntry 8 }
hwBraPTPLicenseState OBJECT-TYPE
SYNTAX INTEGER{noConfigure(1),noLicense(2),licensed(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service license status of the BRA port.
Options:
1.noConfigure(1) -indicates the service license status is no configuration
2.noLicense(2) -indicates the service license status is no license
3.licensed(3) -indicates the service license status is licensed
"
::= { hwBraPTPOperEntry 9 }
hwBraPTPAlarmState OBJECT-TYPE
SYNTAX BITS{bit0(0),bit1(1),bit2(2),bit3(3),bit4(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the alarm state of bra port,from left to right,each bit represents one alarm state.
Options:
1.bit0(0) -indicates LT overload
2.bit1(1) -indicates S port fault(EI2)
3.bit2(2) -indicates U port fault(LOS/RSY)
4.bit3(3) -indicates S port deactive(SAI)
5.bit4(4) -indicates U port deactive(ACT)
0 means no alarm present
1 means the alarm present
"
::= { hwBraPTPOperEntry 10}
hwBRAPTPPerformanceStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBRAPTPPerformanceStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the performance statistics table of the BRA PTP layer.
The index of this table is hwBraPTPPerforIndex.
"
::= { hwIASVoicePortObjects 5 }
hwBRAPTPPerformanceStatEntry OBJECT-TYPE
SYNTAX HwBRAPTPPerformanceStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the performance statistics table of the BRA PTP layer.
The index of this entry is hwBraPTPPerforIndex.
"
INDEX {
hwBraPTPPerforIndex
}
::= { hwBRAPTPPerformanceStatTable 1 }
HwBRAPTPPerformanceStatEntry ::=
SEQUENCE
{
hwBraPTPPerforIndex Integer32,
hwBraPTPPerformanceStatOprType INTEGER,
hwBraPTPPerformanceStatPeri Integer32,
hwBraPTPErrorcode Integer32,
hwBraPTPNebeUas Integer32,
hwBraPTPFebeUas Integer32,
hwBraPTPNebeEs Integer32,
hwBraPTPFebeEs Integer32,
hwBraPTPNebeSes Integer32,
hwBraPTPFebeSes Integer32
}
hwBraPTPPerforIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwBRAPTPPerformanceStatEntry 1 }
hwBraPTPPerformanceStatOprType OBJECT-TYPE
SYNTAX INTEGER{stop(1), start(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the status of the performance statistics operation.
Options:
1.stop(1) -indicates the status of the performance statistics operation is stop
2.start(2) -indicates the status of the performance statistics operation is start
"
::= { hwBRAPTPPerformanceStatEntry 2 }
hwBraPTPPerformanceStatPeri OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the performance statistics period (minute).
"
::= { hwBRAPTPPerformanceStatEntry 3 }
hwBraPTPErrorcode OBJECT-TYPE
SYNTAX Integer32(50..84)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the threshold of error code (count of error code).
"
::= { hwBRAPTPPerformanceStatEntry 4 }
hwBraPTPNebeUas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the Near End Block Error (NEBE) unavailable seconds (second).
"
::= { hwBRAPTPPerformanceStatEntry 5 }
hwBraPTPFebeUas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the Far End Block Error (FEBE) unavailable seconds (second).
"
::= { hwBRAPTPPerformanceStatEntry 6 }
hwBraPTPNebeEs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the NEBE errored seconds (second).
"
::= { hwBRAPTPPerformanceStatEntry 7 }
hwBraPTPFebeEs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the FEBE errored seconds (second).
"
::= { hwBRAPTPPerformanceStatEntry 8 }
hwBraPTPNebeSes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the NEBE severely errored seconds (second).
"
::= { hwBRAPTPPerformanceStatEntry 9 }
hwBraPTPFebeSes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the FEBE severely errored seconds (second).
"
::= { hwBRAPTPPerformanceStatEntry 10 }
hwE1PTPConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwE1PTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the configuration table (attribute configuration and query) of the E1 PTP layer.
The index of this table is hwE1PTPIndex.
"
::= { hwIASVoicePortObjects 6 }
hwE1PTPConfigEntry OBJECT-TYPE
SYNTAX HwE1PTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the configuration table (attribute configuration and query) of the E1 PTP layer.
The index of this entry is hwE1PTPIndex.
"
INDEX {
hwE1PTPIndex
}
::= { hwE1PTPConfigTable 1 }
HwE1PTPConfigEntry ::=
SEQUENCE
{
hwE1PTPIndex Integer32,
hwE1PTPFrameVerifyMode INTEGER,
hwE1PTPImpedance INTEGER,
hwE1PTPSignalType INTEGER,
hwE1PTPConfigState INTEGER,
hwE1PTPAccessDSMode INTEGER,
hwE1PTPErrAlarmSet BITS,
hwE1PTPL2Monitor INTEGER,
hwE1PTPLineCode INTEGER
}
hwE1PTPIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwE1PTPConfigEntry 1 }
hwE1PTPFrameVerifyMode OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the CRC4 frame check.
Options:
1.enable(1) -indicates the CRC4 frame check is enable
2.disable(2) -indicates the CRC4 frame check is disable
"
DEFVAL { disable }
::= { hwE1PTPConfigEntry 2 }
hwE1PTPImpedance OBJECT-TYPE
SYNTAX INTEGER{ohm75(1),ohm120(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the port impedance.
Options:
1.ohm75(1) -indicates the port impedance is 75 ohm
2.ohm120(2) -indicates the port impedance is 120 ohm
"
DEFVAL { ohm75 }
::= { hwE1PTPConfigEntry 3 }
hwE1PTPSignalType OBJECT-TYPE
SYNTAX INTEGER{ccs(1),cas(2),unframe(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the signaling type.
Options:
1.ccs(1) -indicates the signaling type is ccs
2.cas(2) -indicates the signaling type is cas
3.unframe(3) -indicates the signaling type is unframe
"
DEFVAL { ccs }
::= { hwE1PTPConfigEntry 4 }
hwE1PTPConfigState OBJECT-TYPE
SYNTAX INTEGER{notConfigUserType(1),configVoiceUserType(2),configPWUserType(3),configNativeTDM(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the configuration status of the subscriber type.
Options:
1.notConfigUserType(1) -not configured
2.configVoiceUserType(2) -configured MG PRA subscriber
3.configPWUserType(3) -configured PW user
4.configNativeTDM(4) -configured Native TDM
"
::= { hwE1PTPConfigEntry 5}
hwE1PTPAccessDSMode OBJECT-TYPE
SYNTAX INTEGER{digitalAccess(1),directAccess(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates physical layer digital section access mode of e1 port,default:digitalAccess(1).
Options:
1.digitalAccess(1) -digital access
2.directAccess(2) -direct access
"
::= { hwE1PTPConfigEntry 6}
hwE1PTPErrAlarmSet OBJECT-TYPE
SYNTAX BITS{bit0(0),bit1(1),bit2(2),bit3(3),bit4(4),bit5(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates set e1 error alarm switch,from left to right,each bit respresent a switch,default:111000
Options:
1.bit0(0) -indicates report pcm line fault alarm
2.bit1(1) -indicates when error rate reached ULF(Unconditional Line Fai2008-5-30 14:24lure)threshold,report pcm line fault alarm
3.bit2(2) -indicates when error rate reached OLF(Optional Line Failure) threshold,report pcm line fault alarm
4.bit3(3) -indicates when error rate reached LDT(Line Disturbance Transient Event) threshold,report E1 digital line transient event alarm
5.bit4(4) -indicates when E1 frame slip frequency exceeded in observation interval reached degraded threshold,report event alarm
6.bit5(5) -indicates when any line temporary event occurs,report event alarm
"
::= { hwE1PTPConfigEntry 7}
hwE1PTPL2Monitor OBJECT-TYPE
SYNTAX INTEGER{disable(1),enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
enable layer 2 error statistic of e1 port or not,default:enable(2).
Options:
1.disable(1) -indicates the layer 2 error statistic of e1 port is disable
2.enable(2) -indicates the layer 2 error statistic of e1 port is enable
"
::= { hwE1PTPConfigEntry 8}
hwE1PTPLineCode OBJECT-TYPE
SYNTAX INTEGER{hdb3(1),ami(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
line code of e1 port,default:hdb3(1).
Options:
1.hdb3(1) -indicates the line code of e1 port is hdb3
2.ami(2) -indicates the line code of e1 port is ami
"
::= { hwE1PTPConfigEntry 9}
hwE1PTPOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwE1PTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the E1 PTP layer.
The index of this table is hwE1PTPOperIndex.
"
::= { hwIASVoicePortObjects 7 }
hwE1PTPOperEntry OBJECT-TYPE
SYNTAX HwE1PTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the E1 PTP layer.
The index of this entry is hwE1PTPOperIndex.
"
INDEX {
hwE1PTPOperIndex
}
::= { hwE1PTPOperTable 1 }
HwE1PTPOperEntry ::=
SEQUENCE
{
hwE1PTPOperIndex Integer32,
hwE1PTPSrvState INTEGER,
hwE1PTPLoopBackState INTEGER,
hwE1PTPAdminOper INTEGER,
hwE1PTPWarningState Integer32,
hwE1PTPLicenseState INTEGER
}
hwE1PTPOperIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwE1PTPOperEntry 1 }
hwE1PTPSrvState OBJECT-TYPE
SYNTAX INTEGER{normal(1),fault(2),lineAbnormal(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service running status of the E1 port.
Options:
1.normal(1) -indicates the service running status of e1 port is normal
2.fault(2) -indicates the service running status of e1 port is fault
3.lineAbnormal(3) -indicates the service running status of e1 port is line abnormal
"
::= { hwE1PTPOperEntry 2 }
hwE1PTPLoopBackState OBJECT-TYPE
SYNTAX INTEGER{noLoop(1),remoteLoop(2),localLoop(3),eocLoop(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the physical loopback status of the E1 port.
Options:
1.noLoop(1) -indicates the loopback status of e1 port is no loop
2.remoteLoop(2) -indicates the loopback status of e1 port is remote loop
3.localLoop(3) -indicates the loopback status of e1 port is local loop
4.eocLoop(4) -indicates the loopback status of e1 port is EOC loop
"
::= { hwE1PTPOperEntry 3 }
hwE1PTPAdminOper OBJECT-TYPE
SYNTAX INTEGER{reset(1),localLoop(2),remoteLoop(3),cancelLoop(4),invalidvalue(-1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the maintenance operation of the physical layer of the E1 port.
Options:
1.reset(1) -indicates the maintenance operation of e1 port is no reset
2.localLoop(2) -indicates the maintenance operation of e1 port is local loop
3.remoteLoop(3) -indicates the maintenance operation of e1 port is remote loop
4.cancelLoop(4) -indicates the maintenance operation of e1 port is no loop
5.invalidvalue(-1) -indicates an invalid value
"
::= { hwE1PTPOperEntry 4 }
hwE1PTPWarningState OBJECT-TYPE
SYNTAX Integer32(-1|0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the alarm status of the E1 line.
Bit0: LOS (0: no LOS alarm; 1: LOS alarm occurs)
Bit1: AIS (0: no AIS alarm; 1: AIS alarm occurs)
Bit2: LFA (0: no LFA alarm; 1: LFA alarm occurs)
it3: LMFA (0: no LMFA alarm; 1: LMFA alarm occurs)
it4: RRA (0: no RRA alarm; 1: RRA alarm occurs)
it5: CRCER (0: no CRCER alarm; 1: CRCER alarm occurs)
it6:SCOL alarm
it7:ULF alarm
it8:OLF alarm
it9:LDT alarm
it10:error second alarm,in direction ET/LT to NT1
it11:error second alarm,in direction NT1 to ET/LT
it12:sequential severe error second alarm,in direction ET/LT to NT1
it13:sequential severe error second alarm,in direction NT1 to ET/LT
it14:degrade minute alarm,in direction ET/LT to NT1
it15:degrade minute alarm,in direction NT1 to ET/LT
1: Invalid value
"
::= { hwE1PTPOperEntry 5 }
hwE1PTPLicenseState OBJECT-TYPE
SYNTAX INTEGER{noConfigure(1),noLicense(2),licensed(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service license status of the E1 port.
Options:
1.noConfigure(1) -indicates the service license status of the E1 port is no configuration
2.noLicense(2) -indicates the service license status of the E1 port is no license
3.licensed(3) -indicates the service license status of the E1 port is licensed
"
::= { hwE1PTPOperEntry 9 }
hwGTCOperateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwGTCOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the GTC operation table (test control).
The index of this table is hwGTCIndex.
"
::= { hwIASVoicePortObjects 8 }
hwGTCOperateEntry OBJECT-TYPE
SYNTAX HwGTCOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the GTC operation table (test control).
The index of this entry is hwGTCIndex.
"
INDEX {
hwGTCIndex
}
::= { hwGTCOperateTable 1 }
HwGTCOperateEntry ::=
SEQUENCE
{
hwGTCIndex Integer32,
hwGTCTimer Integer32,
hwGTCOperate INTEGER
}
hwGTCIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the GTC test index.
"
::= { hwGTCOperateEntry 1 }
hwGTCTimer OBJECT-TYPE
SYNTAX Integer32(1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the value of the GTC test timer.
The system automatically stops the GTC test when the timer times out (unit: second).When the command for starting a test is delivered, the command must be bound to the test timer with a specified value.
"
::= { hwGTCOperateEntry 2 }
hwGTCOperate OBJECT-TYPE
SYNTAX INTEGER{undertest(1),finishtest(2),invalidvalue(-1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Options:
1.undertest(1) -indicates Start the GTC test
2.finishtest(2) -indicates Stop the GTC test
3.invalidvalue(-1) -indicates an invalid value
"
::= { hwGTCOperateEntry 3 }
hwUserDefineRingTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwUserDefineRingTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the user-defined ring type table.
The index of this table is hwUserDefineRingType.
"
::= { hwIASVoicePortObjects 9 }
hwUserDefineRingTypeEntry OBJECT-TYPE
SYNTAX HwUserDefineRingTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the user-defined ring type table.
The index of this entry is hwUserDefineRingType.
"
INDEX {
hwUserDefineRingType
}
::= { hwUserDefineRingTypeTable 1 }
HwUserDefineRingTypeEntry ::= SEQUENCE
{
hwUserDefineRingType Integer32,
hwUserDefineRingPara1 Integer32,
hwUserDefineRingPara2 Integer32,
hwUserDefineRingPara3 Integer32,
hwUserDefineRingPara4 Integer32,
hwUserDefineRingPara5 Integer32,
hwUserDefineRingPara6 Integer32
}
hwUserDefineRingType OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Index of ring type "
::= { hwUserDefineRingTypeEntry 1 }
hwUserDefineRingPara1 OBJECT-TYPE
SYNTAX Integer32(0..12750)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The first ring time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond)
"
::= { hwUserDefineRingTypeEntry 2 }
hwUserDefineRingPara2 OBJECT-TYPE
SYNTAX Integer32(0..12750)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The first silent time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond)
"
::= { hwUserDefineRingTypeEntry 3 }
hwUserDefineRingPara3 OBJECT-TYPE
SYNTAX Integer32(0..12750)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The second ring time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond)
"
::= { hwUserDefineRingTypeEntry 4 }
hwUserDefineRingPara4 OBJECT-TYPE
SYNTAX Integer32(0..12750)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The second silent time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond)
"
::= { hwUserDefineRingTypeEntry 5 }
hwUserDefineRingPara5 OBJECT-TYPE
SYNTAX Integer32(0..12750)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The third ring time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond)
"
::= { hwUserDefineRingTypeEntry 6 }
hwUserDefineRingPara6 OBJECT-TYPE
SYNTAX Integer32(0..12750)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The third silent time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond)
"
::= { hwUserDefineRingTypeEntry 7 }
hwPortDataTrapSequence OBJECT IDENTIFIER ::= { hwIASVoicePortObjects 10 }
hwPstnPortDataTrapSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates that the Trap sequence is reported after the PSTN port data changes.
"
::= { hwPortDataTrapSequence 1 }
hwBraPortDataChangeSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates that the Trap sequence is reported after the BRA port data changes.
"
::= { hwPortDataTrapSequence 2 }
hwE1PortDataChangeSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates that the Trap sequence is reported after the E1 port data changes.
"
::= { hwPortDataTrapSequence 3 }
hwPstnPortStateStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPstnPortStateStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the PSTN port status mapping table.
The indexes of this table are hwPstnPTPFrameIndex and hwPstnPTPSlotIndex.
"
::= { hwIASVoicePortObjects 11 }
hwPstnPortStateStatisticEntry OBJECT-TYPE
SYNTAX HwPstnPortStateStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the PSTN port status mapping table.
The indexes of this entry are hwPstnPTPFrameIndex and hwPstnPTPSlotIndex.
"
INDEX {
hwPstnPTPFrameIndex,
hwPstnPTPSlotIndex
}
::= { hwPstnPortStateStatisticTable 1 }
HwPstnPortStateStatisticEntry ::=
SEQUENCE
{
hwPstnPTPFrameIndex Integer32,
hwPstnPTPSlotIndex Integer32,
hwPstnBoardPortNumber Integer32,
hwPstnPTPSrvStateBitmapList OCTET STRING,
hwPstnPTPLoopBackStateBitmapList OCTET STRING,
hwPstnPTPTestStateBitmapList OCTET STRING
}
hwPstnPTPFrameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf index.
"
::= { hwPstnPortStateStatisticEntry 1 }
hwPstnPTPSlotIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the slot index.
"
::= { hwPstnPortStateStatisticEntry 2 }
hwPstnBoardPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the total number of ports on the specified PSTN service board.
"
::= { hwPstnPortStateStatisticEntry 3 }
hwPstnPTPSrvStateBitmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the bit mapping table of the service running status of all the PSTN ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-Normal; 2-Faulty; 3-Deactivated; 4-Low power consumption.
"
::= { hwPstnPortStateStatisticEntry 4 }
hwPstnPTPLoopBackStateBitmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the bit mapping table of the physical loopback status of all the PSTN ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-No loopback; 2-Remote loopback; 3-Local loopback.
"
::= { hwPstnPortStateStatisticEntry 5 }
hwPstnPTPTestStateBitmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the bit mapping table of the physical test status of all the PSTN ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-Not tested; 2-Tested.
"
::= { hwPstnPortStateStatisticEntry 6 }
hwBraPortStateStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBraPortStateStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the BRA port status mapping table.
The indexes of this table are hwBraPTPFrameIndex and hwBraPTPSlotIndex.
"
::= { hwIASVoicePortObjects 12 }
hwBraPortStateStatisticEntry OBJECT-TYPE
SYNTAX HwBraPortStateStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the BRA port status mapping table.
The indexes of this entry are hwBraPTPFrameIndex and hwBraPTPSlotIndex.
"
INDEX {
hwBraPTPFrameIndex,
hwBraPTPSlotIndex
}
::= { hwBraPortStateStatisticTable 1 }
HwBraPortStateStatisticEntry ::=
SEQUENCE
{
hwBraPTPFrameIndex Integer32,
hwBraPTPSlotIndex Integer32,
hwBraBoardPortNumber Integer32,
hwBraPTPSrvStateBitmapLists OCTET STRING,
hwBraPTPLoopBackStateBitmapLists OCTET STRING,
hwBraPTPTestStateBitmapList OCTET STRING
}
hwBraPTPFrameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf index.
"
::= { hwBraPortStateStatisticEntry 1 }
hwBraPTPSlotIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the slot index.
"
::= { hwBraPortStateStatisticEntry 2 }
hwBraBoardPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the total number of ports on the specified BRA service board.
"
::= { hwBraPortStateStatisticEntry 3 }
hwBraPTPSrvStateBitmapLists OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the bit mapping table of the service running status of all the BRA ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-Normal; 2-Faulty; 3-Deactivated.
"
::= { hwBraPortStateStatisticEntry 4 }
hwBraPTPLoopBackStateBitmapLists OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the bit mapping table of the physical loopback status of all the BRA ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-No loopback; 2-Remote loopback; 3-Local loopback.
"
::= { hwBraPortStateStatisticEntry 5 }
hwBraPTPTestStateBitmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the bit mapping table of the physical test status of all the BRA ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-Not tested; 2-Tested.
"
::= { hwBraPortStateStatisticEntry 6 }
hwE1PTPL1AlarmThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwE1PTPL1AlarmThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
degrade alarm threshold config table of e1 port layer 1
The index of this table is hwE1PTPAlarmIndex.
"
::= { hwIASVoicePortObjects 13 }
hwE1PTPL1AlarmThresholdEntry OBJECT-TYPE
SYNTAX HwE1PTPL1AlarmThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
degrade alarm threshold config table of e1 port layer 1
The index of this entry is hwE1PTPAlarmIndex.
"
INDEX {
hwE1PTPAlarmIndex
}
::= { hwE1PTPL1AlarmThresholdTable 1 }
HwE1PTPL1AlarmThresholdEntry ::=
SEQUENCE
{
hwE1PTPAlarmIndex Integer32,
hwE1PTPDMAlarmThreshold Integer32,
hwE1PTPESAlarmThreshold Integer32,
hwE1PTPSESAlarmThreshold Integer32
}
hwE1PTPAlarmIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwE1PTPL1AlarmThresholdEntry 1 }
hwE1PTPDMAlarmThreshold OBJECT-TYPE
SYNTAX Integer32(0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates degrade minute alarm threshold, default:8.
"
::= { hwE1PTPL1AlarmThresholdEntry 2 }
hwE1PTPESAlarmThreshold OBJECT-TYPE
SYNTAX Integer32(0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates error second alarm threshold, default:432.
"
::= { hwE1PTPL1AlarmThresholdEntry 3 }
hwE1PTPSESAlarmThreshold OBJECT-TYPE
SYNTAX Integer32(0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates sequential severe error second alarm threshold, default:4.
"
::= { hwE1PTPL1AlarmThresholdEntry 4 }
hwISDNPTPL2AlarmThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwISDNPTPL2AlarmThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates layer 2 signal error alarm threshold config table of ISDN(BRA/PRA) port.
The index of this table is hwIsdnPTPIndex.
"
::= { hwIASVoicePortObjects 14 }
hwISDNPTPL2AlarmThresholdEntry OBJECT-TYPE
SYNTAX HwISDNPTPL2AlarmThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates layer 2 signal error alarm threshold config table of ISDN(BRA/PRA) port.
The index of this entry is hwIsdnPTPIndex.
"
INDEX {
hwIsdnPTPIndex
}
::= { hwISDNPTPL2AlarmThresholdTable 1 }
HwISDNPTPL2AlarmThresholdEntry ::=
SEQUENCE
{
hwIsdnPTPIndex Integer32,
hwIsdnL2DAUnexpectRespondThreshold Integer32,
hwIsdnL2DARebuiltLinkRequestThreshold Integer32,
hwIsdnL2DAN200OutTimeThreshold Integer32,
hwIsdnL2DAQ921AddrDomainErrThreshold Integer32,
hwIsdnL2DAMDLERRJToOThreshold Integer32,
hwIsdnL2DAFrameSNErrThreshold Integer32,
hwIsdnL2DABufferOverFlowThreshold Integer32
}
hwIsdnPTPIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwISDNPTPL2AlarmThresholdEntry 1 }
hwIsdnL2DAUnexpectRespondThreshold OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates threshold of unexpected response alarm threshold,default :0, 0 means does not report alarm.
"
::= { hwISDNPTPL2AlarmThresholdEntry 2 }
hwIsdnL2DARebuiltLinkRequestThreshold OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates threshold of peer initiated re-establishments when in multiple frame established state, default:0, 0 means does not report alarm.
"
::= { hwISDNPTPL2AlarmThresholdEntry 3 }
hwIsdnL2DAN200OutTimeThreshold OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates threshold of unsuccessful re-transmissions n200 times, default:0, 0 means does not report alarm.
"
::= { hwISDNPTPL2AlarmThresholdEntry 4 }
hwIsdnL2DAQ921AddrDomainErrThreshold OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates threshold of Q.921 address field errors, default:0, 0 means does not report alarm.
"
::= { hwISDNPTPL2AlarmThresholdEntry 5 }
hwIsdnL2DAMDLERRJToOThreshold OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates threshold of Q.921 general protocol errors: MDL errors J to O : ETS.300.125, default:0, 0 means does not report alarm.
"
::= { hwISDNPTPL2AlarmThresholdEntry 6 }
hwIsdnL2DAFrameSNErrThreshold OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates threshold of frame check sequence errors : for Q.921, default:0, 0 means does not report alarm.
"
::= { hwISDNPTPL2AlarmThresholdEntry 7 }
hwIsdnL2DABufferOverFlowThreshold OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates threshold of buffer overflows, applies to Q.921, default:0, 0 means does not report alarm.
"
::= { hwISDNPTPL2AlarmThresholdEntry 8 }
--------------------------------------------------------
hwFxoPTPConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFxoPTPConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates A list of hwFxoPTPConfigTable objects.
The index of this table is hwFxoPTPIndex"
::= { hwIASVoicePortObjects 15 }
hwFxoPTPConfigTableEntry OBJECT-TYPE
SYNTAX HwFxoPTPConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates A list of hwFxoPTPConfigTable objects.
The index of this entry is hwFxoPTPIndex"
INDEX {
hwFxoPTPIndex
}
::= { hwFxoPTPConfigTable 1 }
HwFxoPTPConfigTableEntry ::=
SEQUENCE
{
hwFxoPTPIndex Unsigned32,
hwFxoPTPSendVoiceGain Unsigned32,
hwFxoPTPRecvVoiceGain Unsigned32,
hwFxoPTPDCImpedance Unsigned32,
hwFxoPTPACImpedance Unsigned32,
hwFxoPTPRingMinDuration Unsigned32,
hwFxoPTPRingMaxInterval Unsigned32,
hwFxoPTPRingFrequence Unsigned32,
hwFxoPTPRingACAmplitude Unsigned32,
hwFxoPTPRingOffset Unsigned32,
hwFxoPTPFeedMaxVol Unsigned32,
hwFxoPTPFeedMinVol Unsigned32,
hwFxoPTPFeedMaxCurrent Unsigned32,
hwFxoPTPFeedMinCurrent Unsigned32
}
hwFxoPTPIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the frame/slot/port index.
"
::= { hwFxoPTPConfigTableEntry 1 }
hwFxoPTPSendVoiceGain OBJECT-TYPE
SYNTAX Unsigned32(1..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the Fxo board send voice gain.
1: +5.0dB,
2: +4.5dB,
3: +4.0dB,
4: +3.5dB,
5: +3.0dB,
6: +2.5dB,
7: +2.0dB,
8: +1.5dB
9: +1.0dB,
10: +0.5dB
11: 0dB,
12: -0.5dB
13: -1.0dB,
14: -1.5dB,
15: -2.0dB,
16: -2.5dB
17: -3.0dB,
18: -3.5dB,
19: -4.0B,
20: -4.5dB
21: -5.0dB,
22: -5.5dB,
23: -6.0B
"
::= { hwFxoPTPConfigTableEntry 2 }
hwFxoPTPRecvVoiceGain OBJECT-TYPE
SYNTAX Unsigned32(1..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the Fxo board receive voice gain.
1: +5.0dB,
2: +4.5dB,
3: +4.0dB,
4: +3.5dB
5: +3.0dB
6: +2.5dB,
7: +2.0dB,
8: +1.5dB
9: +1.0dB,
10: +0.5dB
11: 0dB,
12: -0.5dB
13: -1.0dB,
14: -1.5dB,
15: -2.0dB,
16: -2.5dB
17: -3.0dB,
18: -3.5dB,
19: -4.0B,
20: -4.5dB
21: -5.0dB,
22: -5.5dB,
23: -6.0B
"
::= { hwFxoPTPConfigTableEntry 3 }
hwFxoPTPDCImpedance OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the DC Impedance.
1: 50
2: 800
(unit: <20><>)
"
::= { hwFxoPTPConfigTableEntry 4 }
hwFxoPTPACImpedance OBJECT-TYPE
SYNTAX Unsigned32(1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the AC Impedance.
1: 600
2: 900
3: 270 + (750 || 150 nF) and 275 + (780 || 150 nF)
4: 220 + (820 || 120 nF) and 220 + (820 || 115 nF)
5: 370 + (620 || 310 nF)
6: 320 + (1050 || 230 nF)
7: 370 + (820 || 110 nF)
8: 275 + (780 || 115 nF)
9: 20 + (820 || 110 nF)
10: 350 + (1000 || 210 nF)
11: 200 + (680 || 100 nF)
12: 600 + 2.16 <20><>F
13: 900 + 1 <20><>F
14: 900 + 2.16 <20><>F
15: 600 + 1 <20><>F
16: Global impedance
(unit: <20><>)
"
::= { hwFxoPTPConfigTableEntry 5 }
hwFxoPTPRingMinDuration OBJECT-TYPE
SYNTAX Unsigned32(1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the min of the ring during.
1: 100 ms
2: 150 ms
3: 200 ms
4: 256 ms
5: 384 ms
6: 512 ms
7: 640 ms
8: 1024 ms
"
::= { hwFxoPTPConfigTableEntry 6 }
hwFxoPTPRingMaxInterval OBJECT-TYPE
SYNTAX Unsigned32(1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the max of the ring interval.
1: not use,
2: 128 ms,
3: 256ms,
4: 384ms,
5: 512ms,
6: 640ms,
7: 768ms,
8: 896ms,
9: 1024ms,
10: 1152ms,
11: 1280ms,
12: 1408ms,
13: 1536ms,
14: 1664ms,
15: 1792ms,
16: 1920ms
"
::= { hwFxoPTPConfigTableEntry 7 }
hwFxoPTPRingFrequence OBJECT-TYPE
SYNTAX Unsigned32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the ring frequence.
1: 16Hz,
2: 25Hz,
3: 50Hz
"
::= { hwFxoPTPConfigTableEntry 8 }
hwFxoPTPRingACAmplitude OBJECT-TYPE
SYNTAX Unsigned32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the ring of the AC amplitude.
1: 74V,
2: 65V,
3: 50V
"
::= { hwFxoPTPConfigTableEntry 9 }
hwFxoPTPRingOffset OBJECT-TYPE
SYNTAX Unsigned32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the ring offset.
"
::= { hwFxoPTPConfigTableEntry 10 }
hwFxoPTPFeedMaxVol OBJECT-TYPE
SYNTAX Unsigned32(1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the max of the PTP feed voltage.
1: -30V,
2: -35V,
3: -40V
4: -45V,
5: -50V
6: -55V
"
::= { hwFxoPTPConfigTableEntry 11 }
hwFxoPTPFeedMinVol OBJECT-TYPE
SYNTAX Unsigned32(1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the min of the PTP feed voltage.
1: -50V,
2: -55V,
3: -60V
4: -65V,
5: -70V
6: -75V
7: -80V
"
::= { hwFxoPTPConfigTableEntry 12 }
hwFxoPTPFeedMaxCurrent OBJECT-TYPE
SYNTAX Unsigned32(1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the max of the PTP feed current.
1: 25mA
2: 30mA
3: 35mA
4: 40mA
"
::= { hwFxoPTPConfigTableEntry 13 }
hwFxoPTPFeedMinCurrent OBJECT-TYPE
SYNTAX Unsigned32(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the min of the PTP feed current.
1: 16mA
2: 17mA
3: 18mA
4: 19mA
5: 20mA
"
::= { hwFxoPTPConfigTableEntry 14 }
---------------------------------------------------------------------------------------------------
hwFxoPTPOperateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFxoPTPOperateTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
A list of HwFxoPTPOperateTableEntry objects.
The index of this table is hwFxoPTPOperIndex.
"
::= { hwIASVoicePortObjects 16 }
hwFxoPTPOperateTableEntry OBJECT-TYPE
SYNTAX HwFxoPTPOperateTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
A list of HwFxoPTPOperateTableEntry objects.
The index of this entry is hwFxoPTPOperIndex.
"
INDEX {
hwFxoPTPOperIndex
}
::= { hwFxoPTPOperateTable 1 }
HwFxoPTPOperateTableEntry ::=
SEQUENCE
{
hwFxoPTPOperIndex Unsigned32,
hwFxoPTPSrvState INTEGER,
hwFxoPTPLoopBackState INTEGER,
hwFxoPTPAdminOper INTEGER
}
hwFxoPTPOperIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the frame/slot/port index.
"
::= { hwFxoPTPOperateTableEntry 1 }
hwFxoPTPSrvState OBJECT-TYPE
SYNTAX INTEGER{normal(1),fault(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the state of port.
Options:
1.normal(1) -indicates the state of port is normal
2.fault(2) -indicates the state of port is fault
"
::= { hwFxoPTPOperateTableEntry 2 }
hwFxoPTPLoopBackState OBJECT-TYPE
SYNTAX INTEGER{noLoop(1),remoteLoop(2),localLoop(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
FXO port loop state:
Options:
1.noLoop(1) -indicates the FXO port loop state is no loop
2.remoteLoop(2) -indicates the FXO port loop state is remote loop
3.localLoop(3) -indicates the FXO port loop state is local loop
"
::= { hwFxoPTPOperateTableEntry 3 }
hwFxoPTPAdminOper OBJECT-TYPE
SYNTAX INTEGER{reset(1),localLoop(2),remoteLoop(3),cancelLoop(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the operate type.
Options:
1.reset(1) -indicates the operate type is no reset
2.localLoop(2) -indicates the operate type is local loop
3.remoteLoop(3) -indicates the operate type is remote loop
4.cancelLoop(4) -indicates the operate type is no loop
"
::= { hwFxoPTPOperateTableEntry 4 }
hwShdslPTPConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwShdslPTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the configuration table (attribute configuration and query) of the Shdsl PTP layer.
The index of this table is hwShdslPTPIndex.
"
::= { hwIASVoicePortObjects 17 }
hwShdslPTPConfigEntry OBJECT-TYPE
SYNTAX HwShdslPTPConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the configuration table (attribute configuration and query) of the Shdsl PTP layer.
The index of this entry is hwShdslPTPIndex.
"
INDEX {
hwShdslPTPIndex
}
::= { hwShdslPTPConfigTable 1 }
HwShdslPTPConfigEntry ::=
SEQUENCE
{
hwShdslPTPIndex Integer32,
hwShdslPTPFrameVerifyMode INTEGER,
hwShdslPTPSignalType INTEGER,
hwShdslPTPConfigState INTEGER,
hwShdslPTPErrAlarmSet BITS,
hwShdslPTPL2Monitor INTEGER
}
hwShdslPTPIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwShdslPTPConfigEntry 1 }
hwShdslPTPFrameVerifyMode OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the CRC4 frame check.
Options:
1.enable(1) -indicates the CRC4 frame check is enable
2.disable(2) -indicates the CRC4 frame check is disable
"
DEFVAL { disable }
::= { hwShdslPTPConfigEntry 2 }
hwShdslPTPSignalType OBJECT-TYPE
SYNTAX INTEGER{ccs(1),cas(2),unframe(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the signaling type.
Options:
1.ccs(1) -indicates the signaling type is ccs
2.cas(2) -indicates the signaling type is cas
3.unframe(3) -indicates the signaling type is unframe
"
DEFVAL { ccs }
::= { hwShdslPTPConfigEntry 3 }
hwShdslPTPConfigState OBJECT-TYPE
SYNTAX INTEGER{notconfigUserType(1),configUserType(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the configuration status of the subscriber type.
Options:
1.notconfigUserType(1) -not configured
2.configUserType(2) -configured
"
::= { hwShdslPTPConfigEntry 4}
hwShdslPTPErrAlarmSet OBJECT-TYPE
SYNTAX BITS{bit0(0),bit1(1),bit2(2),bit3(3),bit4(4),bit5(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates set Shdsl error alarm switch,from left to right,each bit respresent a switch,default:111000.
Options:
1.bit0(0) -indicates report pcm line fault alarm
2.bit1(1) -indicates when error rate reached ULF(Unconditional Line Fai2008-5-30 14:24lure)threshold,report pcm line fault alarm
3.bit2(2) -indicates when error rate reached OLF(Optional Line Failure) threshold,report pcm line fault alarm
4.bit3(3) -indicates when error rate reached LDT(Line Disturbance Transient Event) threshold,report Shdsl digital line transient event alarm
5.bit4(4) -indicates when Shdsl frame slip frequency exceeded in observation interval reached degraded threshold,report event alarm
6.bit5(5) -indicates when any line temporary event occurs,report event alarm
"
::= { hwShdslPTPConfigEntry 5}
hwShdslPTPL2Monitor OBJECT-TYPE
SYNTAX INTEGER{disable(1),enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
enable layer 2 error statistic of shdsl port or not,default:enable(2).
Options:
1.disable(1) -disable the layer 2 error statistic of shdsl port
2.enable(2) -enable the layer 2 error statistic of shdsl port
"
::= { hwShdslPTPConfigEntry 6}
hwShdslPTPOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwShdslPTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the Shdsl PTP layer.
The index of this table is hwShdslPTPOperIndex.
"
::= { hwIASVoicePortObjects 18 }
hwShdslPTPOperEntry OBJECT-TYPE
SYNTAX HwShdslPTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the operation table (management, maintenance, and status query) of the Shdsl PTP layer.
The index of this entry is hwShdslPTPOperIndex.
"
INDEX {
hwShdslPTPOperIndex
}
::= { hwShdslPTPOperTable 1 }
HwShdslPTPOperEntry ::=
SEQUENCE
{
hwShdslPTPOperIndex Integer32,
hwShdslPTPSrvState INTEGER,
hwShdslPTPWarningState Integer32,
hwShdslPTPLicenseState INTEGER
}
hwShdslPTPOperIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the shelf/slot/port index.
"
::= { hwShdslPTPOperEntry 1 }
hwShdslPTPSrvState OBJECT-TYPE
SYNTAX INTEGER{normal(1),fault(2),lineAbnormal(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service running status of the Shdsl port.
Options:
1.normal(1) -indicates the service running status of Shdsl port is normal
2.fault(2) -indicates the service running status of Shdsl port is fault
3.lineAbnormal(3) -indicates the service running status of Shdsl port is line abnormal
"
::= { hwShdslPTPOperEntry 2 }
hwShdslPTPWarningState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the alarm status of the Shdsl line.
Bit0: LOS (0: no LOS alarm; 1: LOS alarm occurs)
Bit1: AIS (0: no AIS alarm; 1: AIS alarm occurs)
Bit2: LFA (0: no LFA alarm; 1: LFA alarm occurs)
Bit3: LMFA (0: no LMFA alarm; 1: LMFA alarm occurs)
Bit4: RRA (0: no RRA alarm; 1: RRA alarm occurs)
Bit5: CRCER (0: no CRCER alarm; 1: CRCER alarm occurs)
Bit6:SCOL alarm
Bit7:ULF alarm
Bit8:OLF alarm
Bit9:LDT alarm
Bit10:error second alarm,in direction ET/LT to NT1
Bit11:error second alarm,in direction NT1 to ET/LT
Bit12:sequential severe error second alarm,in direction ET/LT to NT1
Bit13:sequential severe error second alarm,in direction NT1 to ET/LT
Bit14:degrade minute alarm,in direction ET/LT to NT1
Bit15:degrade minute alarm,in direction NT1 to ET/LT
"
::= { hwShdslPTPOperEntry 3 }
hwShdslPTPLicenseState OBJECT-TYPE
SYNTAX INTEGER{noconfigure(1),nolicense(2),licensed(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the service license status of the Shdsl port.
Options:
1.noconfigure(1) -indicates the service license status of the Shdsl port is no configuration
2.nolicense(2) -indicates the service license status of the Shdsl port is no license
3.licensed(3) -indicates the service license status of the Shdsl port is licensed
"
::= { hwShdslPTPOperEntry 4 }
hwPotsBoardToneDefineTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPotsBoardToneDefineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of this table is hwPotsBoardToneType.
PstnBoard pots signal tone config table.
"
::= { hwIASVoicePortObjects 19 }
hwPotsBoardToneDefineEntry OBJECT-TYPE
SYNTAX HwPotsBoardToneDefineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of this entry is hwPotsBoardToneType.
PstnBoard pots signal tone config table.
"
INDEX { hwPotsBoardToneType }
::= { hwPotsBoardToneDefineTable 1 }
HwPotsBoardToneDefineEntry ::=
SEQUENCE{
hwPotsBoardToneType
INTEGER,
hwPotsBoardToneFreq1
Integer32,
hwPotsBoardToneFreq2
Integer32,
hwPotsBoardToneOnTime
Integer32,
hwPotsBoardToneOffTime
Integer32,
hwPotsBoardToneLevel
Integer32
}
hwPotsBoardToneType OBJECT-TYPE
SYNTAX INTEGER{busytone(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the tone type of signal tone.
Options:
1. busytone(1) -Indicate the tone type
"
::= { hwPotsBoardToneDefineEntry 1 }
hwPotsBoardToneFreq1 OBJECT-TYPE
SYNTAX Integer32 (100..3400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the first frequency of signal tone.(Unit:Hz)
"
::= { hwPotsBoardToneDefineEntry 2 }
hwPotsBoardToneFreq2 OBJECT-TYPE
SYNTAX Integer32 (0..3400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the second frequency of signal tone.(Unit:Hz)
"
::= { hwPotsBoardToneDefineEntry 3 }
hwPotsBoardToneOnTime OBJECT-TYPE
SYNTAX Integer32 (10..60000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the on-time of signal tone. (Unit:ms)
"
::= { hwPotsBoardToneDefineEntry 4 }
hwPotsBoardToneOffTime OBJECT-TYPE
SYNTAX Integer32 (0..60000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the off-time of signal tone. (Unit:ms)
"
::= { hwPotsBoardToneDefineEntry 5 }
hwPotsBoardToneLevel OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the level of signal tone. (Unit:-1dBm0)
"
::= { hwPotsBoardToneDefineEntry 6 }
---------------------------------------------------------------------------------------------------
------ /* Start hwIASVoicePortTrapsVbOids */
hwVoicePTPFrame OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Indicate the frame ID.
"
::= { hwIASVoicePortTrapsVbOids 1 }
hwVoicePTPSlot OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Indicate the slot ID.
"
::= { hwIASVoicePortTrapsVbOids 2 }
hwVoicePTPPort OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Indicate the port ID.
"
::= { hwIASVoicePortTrapsVbOids 3 }
hwVoicePortGtcStatus OBJECT-TYPE
SYNTAX INTEGER{ reserve(0), timeout-finish(1), startservice-finish(2), reserve2(3) }
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The GTC test status.
Options:
1. reserve(0) -reserve
2. timeout-finish(1) -indicates the GTC test finish whit result of time out
3. startservice-finish(2) -indicates the GTC test finish whit result of start service
4. reserve2(3) -reserve2
"
::= { hwIASVoicePortTrapsVbOids 4 }
hwVoicePortSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The trap's sequence number.
"
::= { hwIASVoicePortTrapsVbOids 5 }
hwVoicePortOperateType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The operate type of data change.
"
::= { hwIASVoicePortTrapsVbOids 6 }
hwVoicePortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The port number of data change.
"
::= { hwIASVoicePortTrapsVbOids 7 }
hwPortMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The mask of the changed port.
"
::= { hwIASVoicePortTrapsVbOids 8 }
hwAttributeMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The mask of the changed Attribute.
"
::= { hwIASVoicePortTrapsVbOids 9 }
hwChangepara1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 10 }
hwChangepara2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 11 }
hwChangepara3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 12 }
hwChangepara4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 13 }
hwChangepara5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 14 }
hwChangepara6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 15 }
hwChangepara7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 16 }
hwChangepara8 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 17 }
hwChangepara9 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 18 }
hwChangepara10 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 19 }
hwChangepara11 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 20 }
hwChangepara12 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 21 }
hwChangepara13 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 22 }
hwChangepara14 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 23 }
hwChangepara15 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 24 }
hwChangepara16 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The change value.
"
::= { hwIASVoicePortTrapsVbOids 25 }
------ /* End hwIASVoicePortTrapsVbOids */
------ /* Start hwIASVoicePortComTraps */
hwIASVoicePortGtcFinishTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort, hwVoicePortGtcStatus }
STATUS current
DESCRIPTION
"
The trap indicates that the GTC test is finished cause of time-out or user start service.
"
::= { hwIASVoicePortComTraps 0 1 }
------ /* End hwIASVoicePortComTraps */
------ /* Start hwIASVoicePortPstnTraps */
hwIASVoicePortPstnTrap NOTIFICATION-TYPE
OBJECTS { hwConfigChangeIP, hwVoicePortSequence, hwVoicePortOperateType, hwVoicePortNum,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort
}
STATUS current
DESCRIPTION
"
The Trap indicates that the PSTN port attribute configuratinon was changed.
"
::= { hwIASVoicePortPstnTraps 0 1 }
------ /* End hwIASVoicePortPstnTraps */
------ /* Start hwIASVoicePortBraTraps */
hwIASVoicePortBraTrap NOTIFICATION-TYPE
OBJECTS { hwConfigChangeIP, hwVoicePortSequence, hwVoicePortOperateType, hwVoicePortNum,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort,
hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort
}
STATUS current
DESCRIPTION
"
The Trap indicates that the BRA port attribute configuratinon was changed.
"
::= { hwIASVoicePortBraTraps 0 1 }
------ /* End hwIASVoicePortBraTraps */
------ /* Start hwIASVoicePortE1Traps */
hwIASVoicePortE1Trap NOTIFICATION-TYPE
OBJECTS { hwConfigChangeIP, hwVoicePortSequence, hwVoicePortOperateType, hwVoicePortNum, hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The Trap indicates that the E1 port attribute configuratinon was changed.
"
::= { hwIASVoicePortE1Traps 0 1 }
------ /* End hwIASVoicePortE1Traps */
------ /* Start hwIASVoicePortE1AttributeCfgChgTrap */
hwIASVoicePortE1AttributeCfgChgTrap NOTIFICATION-TYPE
OBJECTS { hwConfigChangeIP, hwVoicePortOperateType, hwVoicePTPFrame, hwVoicePTPSlot, hwPortMask, hwAttributeMask,
hwChangepara1, hwChangepara2, hwChangepara3, hwChangepara4, hwChangepara5, hwChangepara6, hwChangepara7, hwChangepara8,
hwChangepara9, hwChangepara10, hwChangepara11, hwChangepara12, hwChangepara13, hwChangepara14, hwChangepara15, hwChangepara16
}
STATUS current
DESCRIPTION
"
The Trap indicates that the E1 port attribute configuratinon was changed.
"
::= { hwIASVoicePortE1Traps 0 2 }
------ /* End hwIASVoicePortE1AttributeCfgChgTrap */
------ /* Start hwIASVoicePortE1AlarmCfgChgTrap */
hwIASVoicePortE1AlarmCfgChgTrap NOTIFICATION-TYPE
OBJECTS { hwConfigChangeIP, hwVoicePortOperateType, hwVoicePTPFrame, hwVoicePTPSlot, hwPortMask, hwAttributeMask,
hwChangepara1, hwChangepara2, hwChangepara3, hwChangepara4, hwChangepara5, hwChangepara6, hwChangepara7, hwChangepara8,
hwChangepara9, hwChangepara10, hwChangepara11, hwChangepara12, hwChangepara13, hwChangepara14, hwChangepara15, hwChangepara16
}
STATUS current
DESCRIPTION
"
The Trap indicates that the E1 and Shdsl port alarm configuratinon was changed.
"
::= { hwIASVoicePortE1Traps 0 3 }
------ /* End hwIASVoicePortE1AlarmCfgChgTrap */
------ /* Start hwIASVoicePortShdslAttributeChgTrap */
hwIASVoicePortShdslAttributeChgTrap NOTIFICATION-TYPE
OBJECTS { hwConfigChangeIP, hwVoicePortOperateType, hwVoicePTPFrame, hwVoicePTPSlot, hwPortMask, hwAttributeMask,
hwChangepara1, hwChangepara2, hwChangepara3, hwChangepara4, hwChangepara5, hwChangepara6, hwChangepara7, hwChangepara8,
hwChangepara9, hwChangepara10, hwChangepara11, hwChangepara12, hwChangepara13, hwChangepara14, hwChangepara15, hwChangepara16
}
STATUS current
DESCRIPTION
"
The Trap indicates that the Shdsl port attribute configuratinon was changed.
"
::= { hwIASVoicePortE1Traps 0 4 }
------ /* End hwIASVoicePortShdslAttributeChgTrap */
------ /* Start hwIASVoicePortPstnAlarmTraps */
hwIASVoicePortPstnLineFaultTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that user line fault.
"
::= { hwIASVoicePortPstnAlarmTraps 0 1 }
hwIASVoicePortPstnLinenormalTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that user line normal.
"
::= { hwIASVoicePortPstnAlarmTraps 0 2 }
hwVoicePstnBoardSlicLockedTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot}
STATUS current
DESCRIPTION
"
The trap indicates that the slic of the board is locked.
"
::= { hwIASVoicePortPstnAlarmTraps 0 3 }
hwVoicePstnBoardSlicUnlockedTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot}
STATUS current
DESCRIPTION
"
The trap indicates that the slic of the board is unlocked.
"
::= { hwIASVoicePortPstnAlarmTraps 0 4 }
hwVoicePstnPortPowerAlarmTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that A/B line has touch power line over 80V .
"
::= { hwIASVoicePortPstnAlarmTraps 0 5 }
hwVoicePstnPortPowerAlarmRestoreTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that A/B line power normal.
"
::= { hwIASVoicePortPstnAlarmTraps 0 6 }
------ /* End hwIASVoicePortPstnAlarmTraps */
------ /* Start hwIASVoicePortBraAlarmTraps */
hwIASVoicePortBraUniFaultTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that the physical line of the BRA port fails.
"
::= { hwIASVoicePortBraAlarmTraps 0 1 }
hwIASVoicePortBraUniResumeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that BRA port Line Fault Alarm Clear.
"
::= { hwIASVoicePortBraAlarmTraps 0 2 }
hwIASVoicePortBraDegradeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that the number of CRC errors on the BRA port reaches the degraded threshold.
"
::= { hwIASVoicePortBraAlarmTraps 0 3 }
hwIASVoicePortBraDegradeResumeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that BRA Port CRC reached degraded threshold Clear.
"
::= { hwIASVoicePortBraAlarmTraps 0 4 }
hwIASVoicePortBraCrcAlarmTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that the CRC errors on the BRA port reach the alarm threshold.
"
::= { hwIASVoicePortBraAlarmTraps 0 5 }
hwIASVoicePortBraCrcAlarmResumeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that BRA Port CRC reached alarm threshold Clear.
"
::= { hwIASVoicePortBraAlarmTraps 0 6 }
------ /* End hwIASVoicePortBraAlarmTraps */
------ /* Start hwIASVoicePortE1AlarmTraps */
hwIASVoicePortE1FaultTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that E1 line abnormal.
"
::= { hwIASVoicePortE1AlarmTraps 0 1 }
hwIASVoicePortE1ResumeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that E1 line recovery.
"
::= { hwIASVoicePortE1AlarmTraps 0 2 }
hwIASVoicePortE1DegradeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that the number of CRC errors on the E1 port reaches the degraded threshold.
"
::= { hwIASVoicePortE1AlarmTraps 0 3 }
hwIASVoicePortE1DegradeResumeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that E1 Port CRC reached degraded threshold Clear.
"
::= { hwIASVoicePortE1AlarmTraps 0 4 }
hwIASVoicePortE1CrcAlarmTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that the CRC errors on the E1 port reach the alarm threshold.
"
::= { hwIASVoicePortE1AlarmTraps 0 5 }
hwIASVoicePortE1CrcAlarmResumeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that E1 Port CRC reached alarm threshold Clear.
"
::= { hwIASVoicePortE1AlarmTraps 0 6 }
hwIASVoicePortE1BitFaultTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that the number of the error bits of the E1 port reaches the threshold.
"
::= { hwIASVoicePortE1AlarmTraps 0 7 }
hwIASVoicePortE1BitResumeTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that E1 port Bit Error reached threshold clear.
"
::= { hwIASVoicePortE1AlarmTraps 0 8 }
hwIASVoicePortE1LdtTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
TThe trap indicates that the number of the transient error bits of the E1 port reaches the alarm threshold.
"
::= { hwIASVoicePortE1AlarmTraps 0 9 }
hwIASVoicePortE1FrmslipTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
The trap indicates that the out-of-synchronization frames of the E1 port reach the degraded threshold.
"
::= { hwIASVoicePortE1AlarmTraps 0 10 }
------ /* End hwIASVoicePortE1AlarmTraps */
------ /* Start hwIASVoicePortIsdnL2AlarmTraps */
hwIASVoicePortIsdnL2ErrorTrap NOTIFICATION-TYPE
OBJECTS { hwVoicePTPFrame, hwVoicePTPSlot, hwVoicePTPPort }
STATUS current
DESCRIPTION
"
TThe trap indicates that the times of the receipt of Q.921 unsolicited response reach the alarm threshold.
"
::= { hwIASVoicePortIsdnL2AlarmTraps 0 1 }
------ /* End hwIASVoicePortIsdnL2AlarmTraps */
END
View Git Blame Copy Permalink