1878 lines
84 KiB
Plaintext
1878 lines
84 KiB
Plaintext
-- ============================================================================
|
|
-- Copyright (C) 2014 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
-- Description: The HUAWEI SHDSL MIB,extend based on HDSL2-SHDSL-LINE-MIB-rfc4319.mib.
|
|
-- Reference:
|
|
-- Version: V1.26
|
|
-- ============================================================================
|
|
|
|
HUAWEI-SHDSL-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
huaweiUtility
|
|
FROM HUAWEI-MIB
|
|
ifIndex
|
|
FROM IF-MIB
|
|
RowStatus, DateAndTime, TruthValue
|
|
FROM SNMPv2-TC
|
|
Integer32, Unsigned32, Gauge32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
hwFrameIndex, hwSlotIndex,hwPortIndex,hwPortOperStatus,hwPortPrimaryStatus,
|
|
hwPortSecondaryStatus,hwConfigChangeIP
|
|
FROM HUAWEI-DEVICE-MIB
|
|
hwXdslProfName
|
|
FROM HUAWEI-XDSL-COMMON-MIB
|
|
hdsl2ShdslSpanStatusEntry, hdsl2ShdslSpanConfProfileEntry, hdsl2ShdslEndpointAlarmConfProfileEntry,
|
|
hdsl2ShdslSpanConfProfileName,hdsl2ShdslStatusActualLineRate, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
|
|
hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber, hdsl2Shdsl15MinIntervalNumber,
|
|
Hdsl2ShdslPerfIntervalThreshold,hdsl2ShdslEndpointAlarmConfProfileName,hdsl2ShdslEndpointThreshSNRMargin,
|
|
hdsl2ShdslEndpointCurrSnrMgn, hdsl2ShdslEndpointThreshLoopAttenuation, hdsl2ShdslEndpointCurrAtn, hdsl2ShdslEndpointThreshES,
|
|
hdsl2ShdslEndpointCurr15MinES,hdsl2ShdslEndpointThreshSES, hdsl2ShdslEndpointCurr15MinSES, hdsl2ShdslEndpointThreshCRCanomalies,
|
|
hdsl2ShdslEndpointCurr15MinCRCanomalies, hdsl2ShdslEndpointThreshLOSWS, hdsl2ShdslEndpointCurr15MinLOSWS,
|
|
hdsl2ShdslEndpointThreshUAS, hdsl2ShdslEndpointCurr15MinUAS
|
|
FROM HDSL2-SHDSL-LINE-MIB;
|
|
|
|
hwShdsl MODULE-IDENTITY
|
|
LAST-UPDATED "201407070000Z"
|
|
ORGANIZATION
|
|
"Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION "The HUAWEI SHDSL MIB,extend based on HDSL2-SHDSL-LINE-MIB-rfc4319.mib."
|
|
|
|
-- Revision history
|
|
REVISION "201407070000Z"
|
|
DESCRIPTION "V1.26, Modified the version of the mib."
|
|
|
|
REVISION "201310200000Z"
|
|
DESCRIPTION "V1.25, Modify the description of the leaf hwhdsl2ShdslStatusCurrLoopAttenUs, hwhdsl2ShdslStatusCurrSnrMarginUs,
|
|
hwhdsl2ShdslStatusCurrLoopAttenDs, hwhdsl2ShdslStatusCurrSnrMarginDs.
|
|
"
|
|
|
|
REVISION "201308200000Z"
|
|
DESCRIPTION "V1.24, add hwhdsl2ShdslEndpointCurr15MinReInitNum, hwhdsl2ShdslEndpointCurr15MinReInitNumLpr,
|
|
hwhdsl2ShdslEndpointCurr1DayReInitNum, hwhdsl2ShdslEndpointCurr1DayReInitNumLpr
|
|
in hwShdslEndpointCurrTable. Add hwhdsl2Shdsl15MinIntervalReInitNum,
|
|
hwhdsl2Shdsl15MinIntervalReInitNumLpr in hwShdsl15MinIntervalTable.
|
|
Add hwhdsl2Shdsl1DayIntervalReInitNum, hwhdsl2Shdsl1DayIntervalReInitNumLpr
|
|
in hwShdsl1DayIntervalTable.
|
|
"
|
|
|
|
REVISION "201308010000Z"
|
|
DESCRIPTION "V1.23, add hwShdslWorkModeTable.
|
|
"
|
|
|
|
REVISION "201307030000Z"
|
|
DESCRIPTION "V1.22, add the value of tcpam64(4) and tcpam128(5) for these nodes: hwhdsl2ShdslModulationMode,
|
|
hwhdsl2ShdslSpanConfModulationMode, hwhdsl2hwShdslSpanConfModulationMode, hwhdsl2hwShdslModulationMode.
|
|
"
|
|
|
|
REVISION "201203270000Z"
|
|
DESCRIPTION "V1.21, modify the defination of the trap node hwShdslSnrExceedThreshUsAlarmTrap, hwShdslLoopAtteExceedThreshUsAlarmTrap,
|
|
hwShdslESSExceedThreshUsAlarmTrap, hwShdslSESSExceedThreshUsAlarmTrap, hwShdslCRCErrExceedThreshUsAlarmTrap, hwShdslLOSWExceedThreshUsAlarmTrap,
|
|
hwShdslUASSExceedThreshUsAlarmTrap, hwShdslSnrExceedThreshDsAlarmTrap, hwShdslLoopAtteExceedThreshDsAlarmTrap, hwShdslESSExceedThreshDsAlarmTrap,
|
|
hwShdslSESSExceedThreshDsAlarmTrap, hwShdslCRCErrExceedThreshDsAlarmTrap, hwShdslLOSWExceedThreshDsAlarmTrap, hwShdslUASSExceedThreshDsAlarmTrap.
|
|
Add leaf node hwhdsl2hwShdslSpanConfPerfMode in table hwShdslSpanConfProfileTable."
|
|
|
|
REVISION "201202140000Z"
|
|
DESCRIPTION "V1.20, modify the description of the leaf hwhdsl2ShdslStatusCurrSnrMarginUs, hwhdsl2ShdslStatusCurrPboUs,
|
|
hwhdsl2ShdslStatusCurrLoopAttenDs, hwhdsl2ShdslStatusCurrSnrMarginDs, hwhdsl2ShdslStatusCurrPboDs,
|
|
hwhdsl2ShdslStatusGroupMasterPort.
|
|
"
|
|
REVISION "201111080000Z"
|
|
DESCRIPTION "V1.19, add leaf node hwShdslEndpointAlarmConfProfileActiveFailAlarmSwitch.
|
|
Modify the description and value of the leaf node hwhdsl2ShdslSpanConfPathMode.
|
|
Modify the definition of the trap node: hwShdslSnrExceedThreshUsAlarmTrap,
|
|
hwShdslLoopAtteExceedThreshUsAlarmTrap,hwShdslESSExceedThreshUsAlarmTrap,hwShdslSESSExceedThreshUsAlarmTrap,
|
|
hwShdslCRCErrExceedThreshUsAlarmTrap,hwShdslLOSWExceedThreshUsAlarmTrap,hwShdslUASSExceedThreshUsAlarmTrap,
|
|
hwShdslSnrExceedThreshDsAlarmTrap,hwShdslLoopAtteExceedThreshDsAlarmTrap,hwShdslESSExceedThreshDsAlarmTrap,
|
|
hwShdslSESSExceedThreshDsAlarmTrap,hwShdslCRCErrExceedThreshDsAlarmTrap,hwShdslLOSWExceedThreshDsAlarmTrap,
|
|
hwShdslUASSExceedThreshDsAlarmTrap.
|
|
"
|
|
|
|
REVISION "201102210000Z"
|
|
DESCRIPTION "V1.18, add leaf node: hwhdsl2ShdslStatusGroupMasterPort,hwhdsl2ShdslStatusGroupLineRate,
|
|
hwhdsl2ShdslStatusCurrMode,hwhdsl2ShdslStatusGroupActualPayloadRate in table hwShdslSpanStatusTable.
|
|
Modify the description of the leaf node: hwhdsl2ShdslStatusCurrLoopAttenDs.
|
|
"
|
|
|
|
REVISION "201010210000Z"
|
|
DESCRIPTION "V1.17, modify the definition of the trap node: hwShdslSnrExceedThreshUsAlarmTrap,hwShdslLoopAtteExceedThreshUsAlarmTrap,
|
|
hwShdslESSExceedThreshUsAlarmTrap,hwShdslSESSExceedThreshUsAlarmTrap,hwShdslCRCErrExceedThreshUsAlarmTrap,
|
|
hwShdslLOSWExceedThreshUsAlarmTrap,hwShdslUASSExceedThreshUsAlarmTrap.
|
|
Add the definition of the trap node: hwShdslSnrExceedThreshDsAlarmTrap,hwShdslLoopAtteExceedThreshDsAlarmTrap,
|
|
hwShdslESSExceedThreshDsAlarmTrap,hwShdslSESSExceedThreshDsAlarmTrap,hwShdslCRCErrExceedThreshDsAlarmTrap,
|
|
hwShdslLOSWExceedThreshDsAlarmTrap,hwShdslUASSExceedThreshDsAlarmTrap.
|
|
Modify the description of the leaf node: hwShdslEndpointThreshLoopAttenuationDs,hwShdslEndpointThreshSNRMarginDs,
|
|
hwShdslEndpointThreshESDs,hwShdslEndpointThreshSESDs,hwShdslEndpointThreshCRCanomaliesDs,
|
|
hwShdslEndpointThreshLOSWSDs,hwShdslEndpointThreshUASDs.
|
|
"
|
|
|
|
REVISION "201009270000Z"
|
|
DESCRIPTION "V1.16, modify the description of the whole MIB file."
|
|
|
|
REVISION "201008250000Z"
|
|
DESCRIPTION "V1.15, add leaf node hwShdslEndpointAlarmConfProfileDyingGaspCfg in table hwShdslEndpointAlarmConfProfileTable.
|
|
Modify leaf node hdsl2ShdslEndpointAlarmConfProfileDyingGasp for mib standardization."
|
|
|
|
REVISION "201008130000Z"
|
|
DESCRIPTION "V1.14, modify the definition of the node: hwShdslPortBindOper.
|
|
Modify the data type of the trap node hwShdsl2ChipsetSwitchResult."
|
|
|
|
REVISION "201007290000Z"
|
|
DESCRIPTION "V1.13, add the definition of the trap node: hwSHDSLProfIDChangeTrap.
|
|
Add leaf node hwhdslConfProfileType in table hwShdslTrapsVbOids.
|
|
Add the value of invalid(-1) for the node of hwShdslChipsetMode."
|
|
|
|
REVISION "201006230000Z"
|
|
DESCRIPTION "V1.12, modify the definition of the trap node hwShdslPortStatusChangeTrap.
|
|
Add leaf node hwShdsl15MinIntervalMoniSecs, hwShdsl15MinIntervalValid in table hwShdsl15MinIntervalTable.
|
|
Add leaf node hwShdsl1DayIntervalValid in table hwShdsl1DayIntervalTable.
|
|
Add table hwShdslEndpointMaintTable.
|
|
Add hwShdslEndpointAlarmConfProfileTable for supporting downstream alarm parameter.
|
|
Modify the node name of hwShdslSnrExceedThresholdAlarmTrap, hwShdslLoopAtteExceedThreAlarmTrap,
|
|
hwShdslESSExceedThreAlarmTrap, hwShdslSESSExceedThreAlarmTrap, hwShdslCRCErrExceedThreAlarmTrap,
|
|
hwShdslLOSWExceedThreAlarmTrap, hwShdslUASSExceedThreAlarmTrap."
|
|
|
|
REVISION "201002260000Z"
|
|
DESCRIPTION "V1.11, modify the definition of the trap node hwShdslPortBindChangeTrap, hwShdslChipsetModeSwitchTrap. "
|
|
|
|
REVISION "201001120000Z"
|
|
DESCRIPTION "V1.10, Modify the definition of the node, include:hwhdsl2ShdslModulationMode, hwhdsl2hwShdslModulationMode, hwhdsl2ShdslStatusNtrMode. "
|
|
|
|
REVISION "201001120000Z"
|
|
DESCRIPTION "V1.09, add hwShdslEndpointCurrTable,hwShdsl15MinIntervalTable,hwShdsl1DayIntervalTable for shdsl performance monitoring.
|
|
Modify hwShdslSpanConfProfileTable, hwShdslSpanStatusTable for EDTB.
|
|
In hwShdslSpanConfProfileTable,modify hwhdsl2hwShdslSpanConfPathMode,add hwhdsl2hwShdslSpanConfFrameType, hwhdsl2hwShdslSpanConfClkAlign.
|
|
In hwShdslSpanStatusTable,modify hwhdsl2ShdslStatusCurrLoopAttenUs,hwhdsl2ShdslStatusCurrSNRMarginUs,hwhdsl2ShdslStatusCurrPboUs,
|
|
add hwhdsl2ShdslStatusNTRMode,hwhdsl2ShdslStatusCurrLoopAttenDs,hwhdsl2ShdslStatusCurrSNRMarginDs,hwhdsl2ShdslStatusCurrPboDs.
|
|
Modify SHDSL crosstalk mib name hwShdslCrossTalkCanellationGroupTable,hwShdslCrossTalkCanellationGroupIndex,
|
|
hwShdslCrossTalkCanellationGroupPortList,hwShdslCrossTalkCanellationGroupAdminStatus,hwShdslCrossTalkCanellationGroupOperStatus,hwShdslCrossTalkCanellationGroupRowStatus."
|
|
|
|
REVISION "201001120000Z"
|
|
DESCRIPTION "V1.08, Modify the definition of the trap node."
|
|
|
|
REVISION "201001120000Z"
|
|
DESCRIPTION "V1.07, add the definition of the trap node."
|
|
|
|
REVISION "200911300000Z"
|
|
DESCRIPTION "V1.06, add hwShdslCrosssTalkCanellationGroupTable for the cross talk cancellation group."
|
|
|
|
REVISION "200801160000Z"
|
|
DESCRIPTION "V1.03, add hwShdslChipsetModeTable for supporting the configuration of the chipset mode of SHDSL board"
|
|
|
|
REVISION "200312280000Z"
|
|
DESCRIPTION "V1.00, Initial version."
|
|
|
|
::= { huaweiUtility 35 }
|
|
|
|
|
|
hwShdslPortBindConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslPortBindConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwShdslPortBindConfTable contains port binding configuration parameters for the SHDSL line.
|
|
The index of this table is hwShdslGroupIndex.
|
|
"
|
|
::= { hwShdsl 2 }
|
|
|
|
hwShdslPortBindConfEntry OBJECT-TYPE
|
|
SYNTAX HwShdslPortBindConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table hwShdslPortBindConfTable contains port binding configuration parameters for the SHDSL line.
|
|
The index of this entry is hwShdslGroupIndex.
|
|
"
|
|
INDEX { hwShdslGroupIndex }
|
|
::= { hwShdslPortBindConfTable 1 }
|
|
|
|
HwShdslPortBindConfEntry ::=
|
|
SEQUENCE {
|
|
hwShdslGroupIndex Unsigned32,
|
|
hwShdslIfIndexFirst Unsigned32,
|
|
hwShdslIfIndexSecond Unsigned32,
|
|
hwShdslPortBindRowStatus RowStatus
|
|
}
|
|
|
|
hwShdslGroupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in this table.
|
|
The hwShdslGroupIndex should be equal to the hwShdslIfIndexFirst.
|
|
"
|
|
::= { hwShdslPortBindConfEntry 1 }
|
|
|
|
hwShdslIfIndexFirst OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslIfIndexFirst is the first ifindex of the binding group."
|
|
::= { hwShdslPortBindConfEntry 2 }
|
|
|
|
hwShdslIfIndexSecond OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslIfIndexSecond is the second ifindex of the binding group."
|
|
::= { hwShdslPortBindConfEntry 3 }
|
|
|
|
hwShdslPortBindRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslPortBindRowStatus is used to create a new row or
|
|
delete an existing row in the hwShdslPortBindConfTable.
|
|
When binding SHDSL port, RowStatus should be createAndGo(4).
|
|
When unbinding SHDSL port, RowStatus should be destroy(6).
|
|
"
|
|
::= { hwShdslPortBindConfEntry 4 }
|
|
|
|
hwShdslPortBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslPortBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of port type in the SHDSL board.
|
|
The index of this table is hwShdslPortBindPriPort.
|
|
"
|
|
::= { hwShdsl 3 }
|
|
|
|
hwShdslPortBindEntry OBJECT-TYPE
|
|
SYNTAX HwShdslPortBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of port type in the SHDSL board.
|
|
The index of this entry is hwShdslPortBindPriPort.
|
|
"
|
|
INDEX { hwShdslPortBindPriPort }
|
|
::= { hwShdslPortBindTable 1 }
|
|
|
|
HwShdslPortBindEntry ::=
|
|
SEQUENCE {
|
|
hwShdslPortBindPriPort Integer32,
|
|
hwShdslPortBindType INTEGER,
|
|
hwShdslPortBindPortList Unsigned32,
|
|
hwShdslBindRowStatus RowStatus
|
|
}
|
|
|
|
hwShdslPortBindPriPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the primary port in an SHDSL binding group. This object identifies a row in this table."
|
|
::= { hwShdslPortBindEntry 1 }
|
|
|
|
hwShdslPortBindType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mPair(1),
|
|
efm(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SHDSL bind type.
|
|
Options:
|
|
1. mPair(1) -The SHDSL bind type is mPair
|
|
2. efm(2) -The SHDSL bind type is efm
|
|
"
|
|
::= { hwShdslPortBindEntry 2 }
|
|
|
|
hwShdslPortBindPortList OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SHDSL bind ports cover bits."
|
|
::= { hwShdslPortBindEntry 3 }
|
|
|
|
hwShdslBindRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bind operation type, this object is used to create a new row or delete an existing row in this table.
|
|
createAndGo(4) means bind, destroy(6) means undo the bind.
|
|
"
|
|
::= { hwShdslPortBindEntry 4 }
|
|
|
|
hdsl2ShdslStatusCurrLoopAtten OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the current loop attenuation value in the HDSL2/SHDSL span.
|
|
It ranges from 0 to 1270 units of 0.1 dB. (Physical values are 0 to 127 dB).
|
|
Unit: 0.1 dB
|
|
"
|
|
::= { hdsl2ShdslSpanStatusEntry 65535 }
|
|
|
|
hdsl2ShdslStatusCurrSNRMargin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1 dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the current snr margin value in the HDSL2/SHDSL span.
|
|
It ranges from -1270 to 1270 units of 0.1 dB. (Physical values are -127 to 127 dB).
|
|
Unit: 0.1 dB
|
|
"
|
|
::= { hdsl2ShdslSpanStatusEntry 65536 }
|
|
|
|
hdsl2ShdslStatusCurrPbo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the actual Power Back-Off.
|
|
Unit: 0.1 dB
|
|
"
|
|
::= { hdsl2ShdslSpanStatusEntry 65537 }
|
|
|
|
hwhdsl2ShdslModulationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcpam16(1),
|
|
tcpam32(2),
|
|
auto(3),
|
|
tcpam64(4),
|
|
tcpam128(5),
|
|
invalidValue(-1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the current modulation mode in the HDSL2/SHDSL span,
|
|
as reported in an Equipment Response message.
|
|
Options:
|
|
1. tcpam16(1) - SHDSL modulation mode is tcpam16
|
|
2. tcpam32(2) - SHDSL modulation mode is tcpam32
|
|
3. auto(3) - SHDSL modulation mode is auto
|
|
4. tcpam64(4) - SHDSL modulation mode is tcpam64
|
|
5. tcpam128(5) - SHDSL modulation mode is tcpam128
|
|
6. invalidValue(-1) -invalid value
|
|
"
|
|
::= { hdsl2ShdslSpanStatusEntry 65538 }
|
|
|
|
hwhdsl2ShdslSpanConfPathMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
atm(1),
|
|
ptm(2),
|
|
tdm(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines path mode of line, M-Pair bonding ports can work in ATM mode or TDM mode,
|
|
EFM bonding ports work in PTM mode. This object is defaulted atm(1).
|
|
Options:
|
|
1. atm(1) - Path mode is atm
|
|
2. ptm(2) - Path mode is ptm
|
|
3. tdm(3) - Path mode is tdm
|
|
"
|
|
::= { hdsl2ShdslSpanConfProfileEntry 65535 }
|
|
|
|
hwhdsl2ShdslSpanConfModulationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcpam16(1),
|
|
tcpam32(2),
|
|
auto(3),
|
|
tcpam64(4),
|
|
tcpam128(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the modulation mode in the HDSL2/SHDSL span.
|
|
Options:
|
|
1. tcpam16(1) -SHDSL modulation mode is tcpam16
|
|
2. tcpam32(2) -SHDSL modulation mode is tcpam32
|
|
3. auto(3) -SHDSL modulation mode is auto
|
|
4. tcpam64(4) -SHDSL modulation mode is tcpam64
|
|
5. tcpam128(5) -SHDSL modulation mode is tcpam128
|
|
"
|
|
::= { hdsl2ShdslSpanConfProfileEntry 65536 }
|
|
|
|
hdsl2ShdslEndpointAlarmConfProfileDyingGasp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables the report of LOSS-OF-POWER alarm in an SHDSL line.
|
|
Options:
|
|
1. enable(1) - SHDSL alarm profile DyingGasp switch is enable
|
|
2. disable(2) - SHDSL alarm profile DyingGasp switch is disable
|
|
DEFVAL{ disable }
|
|
"
|
|
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 10 }
|
|
|
|
hwShdslChipsetModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslChipsetModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of the chipset mode of SHDSL board.
|
|
The index of this table is a combination of hwShdslFrameID, hwShdslSlotID and hwShdslChipsetID.
|
|
"
|
|
::= { hwShdsl 4 }
|
|
|
|
hwShdslChipsetModeEntry OBJECT-TYPE
|
|
SYNTAX HwShdslChipsetModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of the chipset mode of SHDSL board.
|
|
The index of this entry is a combination of hwShdslFrameID, hwShdslSlotID and hwShdslChipsetID.
|
|
"
|
|
INDEX { hwShdslFrameID, hwShdslSlotID, hwShdslChipsetID }
|
|
::= { hwShdslChipsetModeTable 1 }
|
|
|
|
HwShdslChipsetModeEntry ::=
|
|
SEQUENCE {
|
|
hwShdslFrameID Integer32,
|
|
hwShdslSlotID Integer32,
|
|
hwShdslChipsetID Integer32,
|
|
hwShdslChipsetMode INTEGER
|
|
}
|
|
|
|
hwShdslFrameID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the frame id of the device."
|
|
::= { hwShdslChipsetModeEntry 1 }
|
|
|
|
hwShdslSlotID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the slot id of the device."
|
|
::= { hwShdslChipsetModeEntry 2 }
|
|
|
|
hwShdslChipsetID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the chipset id of the board."
|
|
::= { hwShdslChipsetModeEntry 3 }
|
|
|
|
hwShdslChipsetMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
atm(1),
|
|
ptm(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the SHDSL Chipset Mode.
|
|
Options:
|
|
1. atm(1) - The SHDSL Chipset Mode is atm
|
|
2. ptm(2) - The SHDSL Chipset Mode is ptm
|
|
3. invalid(-1) - Invalid value
|
|
"
|
|
::= { hwShdslChipsetModeEntry 4 }
|
|
|
|
hwShdslSpanConfProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslSpanConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of the modulation mode of SHDSL line-profile.
|
|
The index of this table is hdsl2ShdslSpanConfProfileName.
|
|
"
|
|
::= { hwShdsl 5 }
|
|
|
|
hwShdslSpanConfProfileEntry OBJECT-TYPE
|
|
SYNTAX HwShdslSpanConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of the modulation mode of SHDSL line-profile.
|
|
The index of this entry is hdsl2ShdslSpanConfProfileName.
|
|
"
|
|
INDEX { hdsl2ShdslSpanConfProfileName }
|
|
::= { hwShdslSpanConfProfileTable 1 }
|
|
|
|
HwShdslSpanConfProfileEntry ::=
|
|
SEQUENCE {
|
|
hwhdsl2hwShdslSpanConfModulationMode INTEGER,
|
|
hwhdsl2hwShdslSpanConfPathMode INTEGER,
|
|
hwhdsl2hwShdslSpanConfFrameType INTEGER,
|
|
hwhdsl2hwShdslSpanConfClkAlign INTEGER,
|
|
hwhdsl2hwShdslSpanConfPerfMode INTEGER
|
|
}
|
|
|
|
hwhdsl2hwShdslSpanConfModulationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcpam16(1),
|
|
tcpam32(2),
|
|
auto(3),
|
|
tcpam64(4),
|
|
tcpam128(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the modulation mode in the HDSL2/SHDSL span.
|
|
Options:
|
|
1. tcpam16(1) -SHDSL modulation mode is tcpam16
|
|
2. tcpam32(2) -SHDSL modulation mode is tcpam32
|
|
3. auto(3) -SHDSL modulation mode is auto
|
|
4. tcpam64(4) -SHDSL modulation mode is tcpam64
|
|
5. tcpam128(5) -SHDSL modulation mode is tcpam128
|
|
"
|
|
DEFVAL { auto }
|
|
::= { hwShdslSpanConfProfileEntry 1 }
|
|
|
|
hwhdsl2hwShdslSpanConfPathMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
atm(1),
|
|
ptm(2),
|
|
tdm(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines path mode of line,
|
|
M-Pair bonding ports can only work in ATM mode, EFM bonding ports work in PTM mode.
|
|
Options:
|
|
1. atm(1) - Path mode of line is atm
|
|
2. ptm(2) - Path mode of line is ptm
|
|
3. tdm(3) - Path mode of line is tdm
|
|
"
|
|
DEFVAL { atm }
|
|
::= { hwShdslSpanConfProfileEntry 2 }
|
|
|
|
hwhdsl2hwShdslSpanConfFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
e1(1),
|
|
v35(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the frame type.
|
|
Options:
|
|
1. e1(1) - The frame type is e1
|
|
2. v35(2) - The frame type is v35
|
|
"
|
|
DEFVAL { e1 }
|
|
::= { hwShdslSpanConfProfileEntry 3 }
|
|
|
|
hwhdsl2hwShdslSpanConfClkAlign OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
syn(1),
|
|
notsyn(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the clock mode.
|
|
Options:
|
|
1. syn(1) - Synchronization
|
|
2. notsyn(2) - Asynchronism
|
|
"
|
|
DEFVAL { syn }
|
|
::= { hwShdslSpanConfProfileEntry 4 }
|
|
|
|
hwhdsl2hwShdslSpanConfPerfMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
absolute(2),
|
|
delta(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the performance mode.
|
|
Options:
|
|
1. auto(1) - auto
|
|
2. absolute(2) - absolute
|
|
3. delta(3) - delta
|
|
"
|
|
DEFVAL { auto }
|
|
::= { hwShdslSpanConfProfileEntry 5 }
|
|
|
|
hwShdslSpanStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslSpanStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the status information of the modulation mode of SHDSL line-profile.
|
|
The index of this table is ifIndex.
|
|
"
|
|
::= { hwShdsl 6 }
|
|
|
|
hwShdslSpanStatusEntry OBJECT-TYPE
|
|
SYNTAX HwShdslSpanStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the status information of the modulation mode of SHDSL line-profile.
|
|
The index of this entry is ifIndex.
|
|
"
|
|
INDEX { ifIndex }
|
|
::= { hwShdslSpanStatusTable 1 }
|
|
|
|
HwShdslSpanStatusEntry ::=
|
|
SEQUENCE {
|
|
hwhdsl2hwShdslModulationMode INTEGER,
|
|
hwhdsl2ShdslStatusCurrLoopAttenUs Unsigned32,
|
|
hwhdsl2ShdslStatusCurrSnrMarginUs Integer32,
|
|
hwhdsl2ShdslStatusCurrPboUs Integer32,
|
|
hwhdsl2ShdslStatusNtrMode INTEGER,
|
|
hwhdsl2ShdslStatusCurrLoopAttenDs Integer32,
|
|
hwhdsl2ShdslStatusCurrSnrMarginDs Integer32,
|
|
hwhdsl2ShdslStatusCurrPboDs Integer32,
|
|
hwhdsl2ShdslStatusGroupMasterPort Integer32,
|
|
hwhdsl2ShdslStatusGroupLineRate Gauge32,
|
|
hwhdsl2ShdslStatusCurrMode INTEGER,
|
|
hwhdsl2ShdslStatusGroupActualPayloadRate Gauge32
|
|
}
|
|
|
|
hwhdsl2hwShdslModulationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tcpam16(1),
|
|
tcpam32(2),
|
|
auto(3),
|
|
tcpam64(4),
|
|
tcpam128(5),
|
|
invalidValue(-1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the current modulation mode in the HDSL2/SHDSL span,
|
|
as reported in an Equipment Response message.
|
|
Options:
|
|
1. tcpam16(1) - SHDSL modulation mode is tcpam16
|
|
2. tcpam32(2) - SHDSL modulation mode is tcpam32
|
|
3. auto(3) - SHDSL modulation mode is auto
|
|
4. tcpam64(4) - SHDSL modulation mode is tcpam64
|
|
5. tcpam128(5) - SHDSL modulation mode is tcpam128
|
|
6. invalidValue(-1) - Invalid value
|
|
"
|
|
DEFVAL { auto }
|
|
::= { hwShdslSpanStatusEntry 1 }
|
|
|
|
hwhdsl2ShdslStatusCurrLoopAttenUs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "1dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the current upstream loop attenuation value in the HDSL2/SHDSL span.
|
|
It ranges from 0 to 128 units of 1dB. The invalid value is 128.
|
|
Unit: 1dB
|
|
"
|
|
::= { hwShdslSpanStatusEntry 2 }
|
|
|
|
hwhdsl2ShdslStatusCurrSnrMarginUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "1dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the current upstream snr margin value in the HDSL2/SHDSL span.
|
|
The invalid value is -127. If data on the port is invalid or no data is generated
|
|
on the port because the port has not been activated, the invalid value will be returned.
|
|
Unit: 1dB
|
|
"
|
|
::= { hwShdslSpanStatusEntry 3 }
|
|
|
|
hwhdsl2ShdslStatusCurrPboUs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the current upstream Power Back-Off in the HDSL2/SHDSL span.
|
|
The invalid value is -1. If data on the port is invalid or no data is generated
|
|
on the port because the port has not been activated, the invalid value will be returned.
|
|
Unit: 0.1dB
|
|
"
|
|
::= { hwShdslSpanStatusEntry 4 }
|
|
|
|
hwhdsl2ShdslStatusNtrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
freeRun(1),
|
|
system(2),
|
|
invalidValue(-1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the NTR mode.
|
|
Options:
|
|
1. freeRun(1) - Network timing reference clock mode is freeRun
|
|
2. system(2) - Network timing reference clock mode is system
|
|
3. invalidValue(-1) - Indicates invalid value
|
|
"
|
|
DEFVAL { freeRun }
|
|
::= { hwShdslSpanStatusEntry 5 }
|
|
|
|
hwhdsl2ShdslStatusCurrLoopAttenDs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "1dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the current downstream loop attenuation in the HDSL2/SHDSL span.
|
|
It ranges from -127 to 128 units of 1dB.
|
|
The invalid value is 128. If data on the port is invalid or no data is generated
|
|
on the port because the port has not been activated, the invalid value will be returned.
|
|
Unit: 1dB
|
|
"
|
|
::= { hwShdslSpanStatusEntry 6 }
|
|
|
|
hwhdsl2ShdslStatusCurrSnrMarginDs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "1dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the current downstream SNR margin in the HDSL2/SHDSL span.
|
|
The invalid value is -127. If data on the port is invalid or no data is generated
|
|
on the port because the port has not been activated, the invalid value will be returned.
|
|
Unit: 1dB
|
|
"
|
|
::= { hwShdslSpanStatusEntry 7 }
|
|
|
|
hwhdsl2ShdslStatusCurrPboDs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the current downstream Power Back-Off in the HDSL2/SHDSL span.
|
|
The invalid value is -1. If data on the port is invalid or no data is generated
|
|
on the port because the port has not been activated, the invalid value will be returned.
|
|
Unit: 0.1dB
|
|
"
|
|
::= { hwShdslSpanStatusEntry 8 }
|
|
|
|
hwhdsl2ShdslStatusGroupMasterPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the ifIndex of the master port in the binding group.
|
|
The invalid value is -1. If data on the port is invalid or no data is generated
|
|
on the port because the port has not been activated, the invalid value will be returned.
|
|
"
|
|
::= { hwShdslSpanStatusEntry 9 }
|
|
|
|
hwhdsl2ShdslStatusGroupLineRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the line rate of the binding group.
|
|
"
|
|
::= { hwShdslSpanStatusEntry 10 }
|
|
|
|
hwhdsl2ShdslStatusCurrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
atm(1),
|
|
ptm(2),
|
|
tdm(3),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines path mode of line, M-Pair bonding ports can only work in ATM mode,
|
|
EFM bonding ports work in PTM mode. This object is defaulted atm(1).
|
|
Options:
|
|
1. atm(1) - Path mode is atm
|
|
2. ptm(2) - Path mode is ptm
|
|
3. tdm(3) - Path mode is tdm
|
|
4. invalid(-1) - Invalid value
|
|
"
|
|
::= { hwShdslSpanStatusEntry 11 }
|
|
|
|
hwhdsl2ShdslStatusGroupActualPayloadRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the actual payload rate of the binding group.
|
|
"
|
|
::= { hwShdslSpanStatusEntry 12 }
|
|
|
|
hwShdslCrossTalkCanellationGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslCrossTalkCanellationGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of the cross talk cancellation group.
|
|
The index of this table is hwShdslCrossTalkCanellationGroupIndex.
|
|
"
|
|
::= { hwShdsl 7 }
|
|
|
|
hwShdslCrossTalkCanellationGroupEntry OBJECT-TYPE
|
|
SYNTAX HwShdslCrossTalkCanellationGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports the configuration of the cross talk cancellation group.
|
|
The index of this entry is hwShdslCrossTalkCanellationGroupIndex.
|
|
"
|
|
INDEX { hwShdslCrossTalkCanellationGroupIndex }
|
|
::= { hwShdslCrossTalkCanellationGroupTable 1 }
|
|
|
|
HwShdslCrossTalkCanellationGroupEntry ::=
|
|
SEQUENCE {
|
|
hwShdslCrossTalkCanellationGroupIndex Unsigned32,
|
|
hwShdslCrossTalkCanellationGroupPortList OCTET STRING,
|
|
hwShdslCrossTalkCanellationGroupAdminStatus INTEGER,
|
|
hwShdslCrossTalkCanellationGroupOperStatus INTEGER,
|
|
hwShdslCrossTalkCanellationGroupRowStatus RowStatus
|
|
}
|
|
|
|
hwShdslCrossTalkCanellationGroupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in this table."
|
|
::= { hwShdslCrossTalkCanellationGroupEntry 1 }
|
|
|
|
hwShdslCrossTalkCanellationGroupPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the port list of the shdsl cross talk cancellation group.
|
|
Port index indicates the port value.
|
|
"
|
|
::= { hwShdslCrossTalkCanellationGroupEntry 2 }
|
|
|
|
hwShdslCrossTalkCanellationGroupAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deactivate(1),
|
|
activate(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the administration status of the SHDSL cross talk cancellation group.
|
|
When the administration status is deactivate, the port in the group cannot be activated.
|
|
Options:
|
|
1. deactivate(1) - The administration status of the SHDSL cross talk cancellation group is deactivate
|
|
2. activate(2) - The administration status of the SHDSL cross talk cancellation group is activate
|
|
"
|
|
::= { hwShdslCrossTalkCanellationGroupEntry 3 }
|
|
|
|
hwShdslCrossTalkCanellationGroupOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
activated(1),
|
|
activating(2),
|
|
deactivated(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the running status of the shdsl cross talk cancellation group.
|
|
Options:
|
|
1. activated(1) - The running status of the SHDSL cross talk cancellation group is activated
|
|
2. activating(2) - The running status of the SHDSL cross talk cancellation group is activating
|
|
3. deactivated(3) - The running status of the SHDSL cross talk cancellation group is deactivated
|
|
"
|
|
::= { hwShdslCrossTalkCanellationGroupEntry 4 }
|
|
|
|
hwShdslCrossTalkCanellationGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or delete an existing row in this table."
|
|
::= { hwShdslCrossTalkCanellationGroupEntry 5 }
|
|
|
|
-- shdsl trap
|
|
hwShdslTrapsVbOids OBJECT IDENTIFIER ::= { hwShdsl 8 }
|
|
|
|
hwShdsl2ChipsetSwitchResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
success(0),
|
|
fail(1)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the SHDSL Chipset Switch Result.
|
|
Options:
|
|
1. success(0) - The SHDSL Chipset Switch Result is success
|
|
2. fail(1) - The SHDSL Chipset Switch Result is fail
|
|
"
|
|
::= { hwShdslTrapsVbOids 1 }
|
|
|
|
hwShdslPortBindOper OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unbind(1),
|
|
bind(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the SHDSL Port Bind operate
|
|
Options:
|
|
1. unbind(1) -SHDSL port state is unbind
|
|
2. bind(2) -SHDSL port state is bind
|
|
"
|
|
::= { hwShdslTrapsVbOids 2 }
|
|
|
|
hwShdslPortBindNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the SHDSL Bind Port number"
|
|
::= { hwShdslTrapsVbOids 3 }
|
|
|
|
hwhdslSpanConfProfileID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the line template item."
|
|
::= { hwShdslTrapsVbOids 4 }
|
|
|
|
hwhdslActivationFailureCause OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..1024))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the the reason of the active port fail."
|
|
::= { hwShdslTrapsVbOids 5 }
|
|
|
|
hwhdslChipsetID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the chipset ID of the board."
|
|
::= { hwShdslTrapsVbOids 6 }
|
|
|
|
hwhdslConfProfileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hdsl2ShdslSpanConfProfile(1),
|
|
hdsl2ShdslEndpointAlarmConfProfile(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the type of the SHDSL profile ID.
|
|
Options:
|
|
1. hdsl2ShdslSpanConfProfile(1) - SHDSL line profile
|
|
2. hdsl2ShdslEndpointAlarmConfProfile(2) - SHDSL alarm profile
|
|
"
|
|
::= { hwShdslTrapsVbOids 7 }
|
|
|
|
hwShdslTraps OBJECT IDENTIFIER ::= { hwShdsl 9 }
|
|
hwShdslCommonTraps OBJECT IDENTIFIER ::= { hwShdslTraps 1 }
|
|
hwShdslCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwShdslCommonTraps 0 }
|
|
hwShdslAlarmTraps OBJECT IDENTIFIER ::= { hwShdslTraps 2 }
|
|
hwShdslAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwShdslAlarmTraps 0 }
|
|
|
|
hwShdslPortStatusChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwPortOperStatus,
|
|
hwPortPrimaryStatus,
|
|
hwPortSecondaryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslPortStatusChangeTrap is sent when the status of an SHDSL port changes."
|
|
::= { hwShdslCommonTraps 0 1 }
|
|
|
|
hwShdslPortBindChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwShdslPortBindOper,
|
|
hwShdslPortBindType,
|
|
hwShdslPortBindNum,
|
|
hdsl2ShdslSpanConfProfileName,
|
|
hwShdslPortBindPortList,
|
|
hwShdslPortBindPortList
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslPortBindChangeTrap is sent when the binding relationship of an SHDSL port changes."
|
|
::= { hwShdslCommonTraps 0 2 }
|
|
|
|
hwShdslChipsetModeSwitchTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwShdslChipsetID,
|
|
hwShdslChipsetMode,
|
|
hwShdsl2ChipsetSwitchResult
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslChipsetModeSwitchTrap is sent when the chipset mode of an SHDSL port changes."
|
|
::= { hwShdslCommonTraps 0 3 }
|
|
|
|
hwSHDSLProfIDChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwConfigChangeIP,
|
|
hwhdslConfProfileType,
|
|
ifIndex,
|
|
hwXdslProfName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwSHDSLProfIDChangeTrap is sent when the profile bound to an SHDSL port is changed."
|
|
::= { hwShdslCommonTraps 0 4 }
|
|
|
|
hwShdslPortActRateLowerThresholdAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslStatusActualLineRate,
|
|
hdsl2ShdslStatusActualLineRate
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslPortActRateLowerThresholdAlarmTrap is sent
|
|
when the activation rate of an xDSL line is lower than the threshold.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 1 }
|
|
|
|
hwShdslSnrExceedThreshUsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointThreshSNRMargin,
|
|
hdsl2ShdslEndpointCurrSnrMgn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslSnrExceedThreshUsAlarmTrap is sent when the upstream SNR margin exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 2 }
|
|
|
|
hwShdslLoopAtteExceedThreshUsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointThreshLoopAttenuation,
|
|
hdsl2ShdslEndpointCurrAtn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslLoopAtteExceedThreshUsAlarmTrap is sent when the upstream loop attenuation exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 3 }
|
|
|
|
hwShdslESSExceedThreshUsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointThreshES,
|
|
hdsl2ShdslEndpointCurr15MinES
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslESSExceedThreshUsAlarmTrap is sent when the upstream errored seconds (ESs) exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 4 }
|
|
|
|
hwShdslSESSExceedThreshUsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointThreshSES,
|
|
hdsl2ShdslEndpointCurr15MinSES
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslSESSExceedThreshUsAlarmTrap is sent
|
|
when the upstream severely errored seconds (SESs) exceeds the threshold.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 5 }
|
|
|
|
hwShdslCRCErrExceedThreshUsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointThreshCRCanomalies,
|
|
hdsl2ShdslEndpointCurr15MinCRCanomalies
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslCRCErrExceedThreshUsAlarmTrap is sent when the upstream CRC errors exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 6 }
|
|
|
|
hwShdslLOSWExceedThreshUsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointThreshLOSWS,
|
|
hdsl2ShdslEndpointCurr15MinLOSWS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslLOSWExceedThreshUsAlarmTrap is sent
|
|
when the upstream loss of synchronization word (LOSW) exceeds the threshold.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 7 }
|
|
|
|
hwShdslUASSExceedThreshUsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointThreshUAS,
|
|
hdsl2ShdslEndpointCurr15MinUAS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslUASSExceedThreshUsAlarmTrap is sent
|
|
when the upstream unavailable seconds (UASs) exceeds the threshold.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 8 }
|
|
|
|
hwShdslSTURPowerOffThreAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslSTURPowerOffThreAlarmTrap is sent when the G.SHDSL STU-R is powered off."
|
|
::= { hwShdslAlarmTraps 0 9 }
|
|
|
|
hwShdslPortAutoDeactiveAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslPortAutoDeactiveAlarmTrap is sent
|
|
when the G.SHDSL port is automatically deactivated due to the line fault.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 10 }
|
|
|
|
hwShdslPortReactiveAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslPortReactiveAlarmTrap is sent
|
|
when the G.SHDSL port is re-activated after the line recovers.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 11 }
|
|
|
|
hwShdslConfigParaFailedActivateAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwhdslSpanConfProfileID,
|
|
hwhdslActivationFailureCause
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslConfigParaFailedActivateAlarmTrap is sent
|
|
when the G.SHDSL line configuration parameters fail to activate the port.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 12 }
|
|
|
|
hwShdslChipsetNotAvailableAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwhdslChipsetID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslChipsetNotAvailableAlarmTrap is sent when the G.SHDSL chipset is not available."
|
|
::= { hwShdslAlarmTraps 0 13 }
|
|
|
|
hwShdslChipsetRecoverAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwhdslChipsetID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslChipsetRecoverAlarmTrap is sent when the G.SHDSL chipset recovers from a fault."
|
|
::= { hwShdslAlarmTraps 0 14 }
|
|
|
|
hwShdslPortDeactiveAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslPortDeactiveAlarmTrap is sent when some xDSL ports or all
|
|
the xDSL ports are automatically deactivated due to lack of licenses.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 15 }
|
|
|
|
hwShdslSnrExceedThreshDsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hwShdslEndpointThreshSNRMarginDs,
|
|
hdsl2ShdslEndpointCurrSnrMgn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslSnrExceedThreshDsAlarmTrap is sent when the downstream SNR margin exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 16 }
|
|
|
|
hwShdslLoopAtteExceedThreshDsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hwShdslEndpointThreshLoopAttenuationDs,
|
|
hdsl2ShdslEndpointCurrAtn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslLoopAtteExceedThreshDsAlarmTrap is sent when the downstream loop attenuation exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 17 }
|
|
|
|
hwShdslESSExceedThreshDsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hwShdslEndpointThreshESDs,
|
|
hdsl2ShdslEndpointCurr15MinES
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslESSExceedThreshDsAlarmTrap is sent when the downstream errored seconds (ESs) exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 18 }
|
|
|
|
hwShdslSESSExceedThreshDsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hwShdslEndpointThreshSESDs,
|
|
hdsl2ShdslEndpointCurr15MinSES
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslSESSExceedThreshDsAlarmTrap is sent
|
|
when the downstream severely errored seconds (SESs) exceeds the threshold.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 19 }
|
|
|
|
hwShdslCRCErrExceedThreshDsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hwShdslEndpointThreshCRCanomaliesDs,
|
|
hdsl2ShdslEndpointCurr15MinCRCanomalies
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslCRCErrExceedThreshDsAlarmTrap is sent when the downstream CRC errors exceeds the threshold."
|
|
::= { hwShdslAlarmTraps 0 20 }
|
|
|
|
hwShdslLOSWExceedThreshDsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hwShdslEndpointThreshLOSWSDs,
|
|
hdsl2ShdslEndpointCurr15MinLOSWS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslLOSWExceedThreshDsAlarmTrap is sent
|
|
when the downstream loss of synchronization word (LOSW) exceeds the threshold.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 21 }
|
|
|
|
hwShdslUASSExceedThreshDsAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hdsl2ShdslInvIndex,
|
|
hwShdslEndpointThreshUASDs,
|
|
hdsl2ShdslEndpointCurr15MinUAS
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hwShdslUASSExceedThreshDsAlarmTrap is sent
|
|
when the downstream unavailable seconds (UASs) exceeds the threshold.
|
|
"
|
|
::= { hwShdslAlarmTraps 0 22 }
|
|
|
|
hwShdslEndpointCurrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslEndpointCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains current status and performance information for segment endpoints
|
|
in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex,
|
|
entries in this table MUST be maintained in a persistent manner.
|
|
The index of this table is a combination of ifIndex, hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointSide and hdsl2ShdslEndpointWirePair.
|
|
"
|
|
::= { hwShdsl 10 }
|
|
|
|
hwShdslEndpointCurrEntry OBJECT-TYPE
|
|
SYNTAX HwShdslEndpointCurrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains current status and performance information for segment endpoints
|
|
in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex,
|
|
entries in this table MUST be maintained in a persistent manner.
|
|
The index of this entry is a combination of ifIndex, hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointSide and hdsl2ShdslEndpointWirePair.
|
|
"
|
|
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,hdsl2ShdslEndpointWirePair }
|
|
::= { hwShdslEndpointCurrTable 1 }
|
|
|
|
HwShdslEndpointCurrEntry ::=
|
|
SEQUENCE {
|
|
hwShdslEndpointCurr15MinStartTime DateAndTime,
|
|
hwShdslEndpointCurr1DayStartTime DateAndTime,
|
|
hwhdsl2ShdslEndpointCurr15MinReInitNum Counter32,
|
|
hwhdsl2ShdslEndpointCurr15MinReInitNumLpr Counter32,
|
|
hwhdsl2ShdslEndpointCurr1DayReInitNum Counter32,
|
|
hwhdsl2ShdslEndpointCurr1DayReInitNumLpr Counter32
|
|
}
|
|
|
|
hwShdslEndpointCurr15MinStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the start time of the current 15-minute performance statistics."
|
|
::= { hwShdslEndpointCurrEntry 1 }
|
|
|
|
hwShdslEndpointCurr1DayStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the start time of the current 1-day performance statistics."
|
|
::= { hwShdslEndpointCurrEntry 2 }
|
|
|
|
hwhdsl2ShdslEndpointCurr15MinReInitNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations in the current 15-minute interval."
|
|
::= { hwShdslEndpointCurrEntry 3 }
|
|
|
|
hwhdsl2ShdslEndpointCurr15MinReInitNumLpr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations due to loss of power in the current 15-minute interval."
|
|
::= { hwShdslEndpointCurrEntry 4 }
|
|
|
|
hwhdsl2ShdslEndpointCurr1DayReInitNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations in the current 1-day interval."
|
|
::= { hwShdslEndpointCurrEntry 5 }
|
|
|
|
hwhdsl2ShdslEndpointCurr1DayReInitNumLpr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations due to loss of power in the current 1-day interval."
|
|
::= { hwShdslEndpointCurrEntry 6 }
|
|
|
|
hwShdsl15MinIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdsl15MinIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
|
|
This table contains live data from equipment. As such, it is NOT persistent.
|
|
The index of this table is a combination of ifIndex, hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointWirePair and hdsl2Shdsl15MinIntervalNumber.
|
|
"
|
|
::= { hwShdsl 11 }
|
|
|
|
hwShdsl15MinIntervalEntry OBJECT-TYPE
|
|
SYNTAX HwShdsl15MinIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
|
|
This table contains live data from equipment. As such, it is NOT persistent.
|
|
The index of this entry is a combination of ifIndex, hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointWirePair and hdsl2Shdsl15MinIntervalNumber.
|
|
"
|
|
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
|
|
hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}
|
|
::= { hwShdsl15MinIntervalTable 1 }
|
|
|
|
HwShdsl15MinIntervalEntry ::=
|
|
SEQUENCE {
|
|
hwShdsl15MinIntervalStartTime DateAndTime,
|
|
hwShdsl15MinIntervalMoniSecs Unsigned32,
|
|
hwShdsl15MinIntervalValid TruthValue,
|
|
hwhdsl2Shdsl15MinIntervalReInitNum Counter32,
|
|
hwhdsl2Shdsl15MinIntervalReInitNumLpr Counter32
|
|
|
|
}
|
|
|
|
hwShdsl15MinIntervalStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the start time of the historical 15-minute performance statistics."
|
|
::= { hwShdsl15MinIntervalEntry 1 }
|
|
|
|
hwShdsl15MinIntervalMoniSecs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the total seconds monitored in this interval.
|
|
Unit: seconds
|
|
"
|
|
::= { hwShdsl15MinIntervalEntry 2 }
|
|
|
|
hwShdsl15MinIntervalValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if the data for this interval is valid."
|
|
::= { hwShdsl15MinIntervalEntry 3 }
|
|
|
|
hwhdsl2Shdsl15MinIntervalReInitNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations in the historical 15-minute interval."
|
|
::= { hwShdsl15MinIntervalEntry 4 }
|
|
|
|
hwhdsl2Shdsl15MinIntervalReInitNumLpr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations due to loss of power in the historical 15-minute interval."
|
|
::= { hwShdsl15MinIntervalEntry 5 }
|
|
|
|
hwShdsl1DayIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdsl1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
|
|
This table contains live data from equipment. As such, it is NOT persistent.
|
|
The index of this table is a combination of ifIndex, hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointWirePair and hdsl2Shdsl1DayIntervalNumber.
|
|
"
|
|
::= { hwShdsl 12 }
|
|
|
|
hwShdsl1DayIntervalEntry OBJECT-TYPE
|
|
SYNTAX HwShdsl1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
|
|
This table contains live data from equipment. As such, it is NOT persistent.
|
|
The index of this entry is a combination of ifIndex, hdsl2ShdslInvIndex,
|
|
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointWirePair and hdsl2Shdsl1DayIntervalNumber.
|
|
"
|
|
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
|
|
hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber }
|
|
::= { hwShdsl1DayIntervalTable 1 }
|
|
|
|
HwShdsl1DayIntervalEntry ::=
|
|
SEQUENCE {
|
|
hwShdsl1DayIntervalStartTime DateAndTime,
|
|
hwShdsl1DayIntervalValid TruthValue,
|
|
hwhdsl2Shdsl1DayIntervalReInitNum Counter32,
|
|
hwhdsl2Shdsl1DayIntervalReInitNumLpr Counter32
|
|
}
|
|
|
|
hwShdsl1DayIntervalStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the start time of the historical 1-day performance statistics."
|
|
::= { hwShdsl1DayIntervalEntry 1 }
|
|
|
|
hwShdsl1DayIntervalValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if the data for this interval is valid."
|
|
::= { hwShdsl1DayIntervalEntry 2 }
|
|
|
|
hwhdsl2Shdsl1DayIntervalReInitNum OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations in the historical 1-day interval."
|
|
::= { hwShdsl1DayIntervalEntry 3 }
|
|
|
|
hwhdsl2Shdsl1DayIntervalReInitNumLpr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of total reinitializations due to loss of power in the historical 1-day interval."
|
|
::= { hwShdsl1DayIntervalEntry 4 }
|
|
|
|
hwShdslEndpointMaintTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslEndpointMaintEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports maintenance operations (e.g., loopbacks) to be performed on HDSL2/SHDSL segment
|
|
endpoints. This table contains live data from equipment. As such, it is NOT persistent.
|
|
The index of this table is a combination of ifIndex, hdsl2ShdslInvIndex, and hdsl2ShdslEndpointSide.
|
|
"
|
|
::= { hwShdsl 13 }
|
|
|
|
hwShdslEndpointMaintEntry OBJECT-TYPE
|
|
SYNTAX HwShdslEndpointMaintEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports maintenance operations (e.g., loopbacks) to be performed on HDSL2/SHDSL segment
|
|
endpoints. This table contains live data from equipment. As such, it is NOT persistent.
|
|
The index of this entry is a combination of ifIndex, hdsl2ShdslInvIndex, and hdsl2ShdslEndpointSide.
|
|
"
|
|
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide}
|
|
::= { hwShdslEndpointMaintTable 1 }
|
|
|
|
HwShdslEndpointMaintEntry ::=
|
|
SEQUENCE {
|
|
hwShdslMaintPowerBackOffValue Gauge32
|
|
}
|
|
|
|
hwShdslMaintPowerBackOffValue OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If hdsl2ShdslMaintPowerBackOff is set to enhanced(2), you can set this object from 0 to 31 db."
|
|
::= { hwShdslEndpointMaintEntry 1 }
|
|
|
|
hwShdslEndpointAlarmConfProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslEndpointAlarmConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports definitions of alarm configuration profiles for HDSL2/SHDSL segment endpoints.
|
|
Each profile contains a set of parameters for setting alarm thresholds for various performance
|
|
attributes monitored at HDSL2/SHDSL segment endpoints.
|
|
This table MUST be maintained in a persistent manner.
|
|
The index of this table is hdsl2ShdslEndpointAlarmConfProfileName.
|
|
"
|
|
::= { hwShdsl 14 }
|
|
|
|
hwShdslEndpointAlarmConfProfileEntry OBJECT-TYPE
|
|
SYNTAX HwShdslEndpointAlarmConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports definitions of alarm configuration profiles for HDSL2/SHDSL segment endpoints.
|
|
Each profile contains a set of parameters for setting alarm thresholds for various performance
|
|
attributes monitored at HDSL2/SHDSL segment endpoints.
|
|
This table MUST be maintained in a persistent manner.
|
|
The index of this entry is hdsl2ShdslEndpointAlarmConfProfileName.
|
|
"
|
|
INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName }
|
|
::= { hwShdslEndpointAlarmConfProfileTable 1 }
|
|
|
|
HwShdslEndpointAlarmConfProfileEntry ::=
|
|
SEQUENCE {
|
|
hwShdslEndpointThreshLoopAttenuationDs Integer32,
|
|
hwShdslEndpointThreshSNRMarginDs Integer32,
|
|
hwShdslEndpointThreshESDs Hdsl2ShdslPerfIntervalThreshold,
|
|
hwShdslEndpointThreshSESDs Hdsl2ShdslPerfIntervalThreshold,
|
|
hwShdslEndpointThreshCRCanomaliesDs Integer32,
|
|
hwShdslEndpointThreshLOSWSDs Hdsl2ShdslPerfIntervalThreshold,
|
|
hwShdslEndpointThreshUASDs Hdsl2ShdslPerfIntervalThreshold,
|
|
hwShdslEndpointAlarmConfProfileDyingGaspCfg INTEGER,
|
|
hwShdslEndpointAlarmConfProfileActiveFailAlarmSwitch INTEGER
|
|
|
|
}
|
|
|
|
hwShdslEndpointThreshLoopAttenuationDs OBJECT-TYPE
|
|
SYNTAX Integer32(-127..128)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the loop attenuation alarm threshold in the downstream direction.
|
|
When the current value of hdsl2ShdslEndpointCurrAtn reaches or exceeds this threshold,
|
|
an hwShdslLoopAtteExceedThreshDsAlarmTrap MAY be generated.
|
|
Unit: dB
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 1 }
|
|
|
|
hwShdslEndpointThreshSNRMarginDs OBJECT-TYPE
|
|
SYNTAX Integer32(-127..128)
|
|
UNITS "dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the SNR margin alarm threshold in the downstream direction.
|
|
When the current value of hdsl2ShdslEndpointCurrSnrMgn reaches or drops below this threshold,
|
|
a hwShdslSnrExceedThreshDsAlarmTrap MAY be generated.
|
|
Unit: dB
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 2 }
|
|
|
|
hwShdslEndpointThreshESDs OBJECT-TYPE
|
|
SYNTAX Hdsl2ShdslPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of Errored Seconds (ES)in the
|
|
downstream direction within any given 15-minute performance data collection interval.
|
|
If the value of Errored Seconds in a particular 15-minute collection interval
|
|
reaches/ exceeds this value, an hwShdslESSExceedThreshDsAlarmTrap MAY be generated.
|
|
At most, one notification will be sent per interval per endpoint.
|
|
Unit: seconds
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 3 }
|
|
|
|
hwShdslEndpointThreshSESDs OBJECT-TYPE
|
|
SYNTAX Hdsl2ShdslPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of Severely Errored Seconds (SES)in the
|
|
downstream direction within any given 15-minute performance data collection interval.
|
|
If the value of Severely Errored Seconds in a particular 15-minute collection
|
|
interval reaches/exceeds this value, an hwShdslSESSExceedThreshDsAlarmTrap MAY be generated.
|
|
At most, one notification will be sent per interval per endpoint.
|
|
Unit: seconds
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 4 }
|
|
|
|
hwShdslEndpointThreshCRCanomaliesDs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "detected CRC Anomalies"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of CRC anomalies in the downstream
|
|
direction within any given 15-minute performance data collection interval.
|
|
If the value of CRC anomalies in a particular 15-minute collection interval
|
|
reaches/exceeds this value, an hwShdslCRCErrExceedThreshDsAlarmTrap MAY be generated.
|
|
At most, one notification will be sent per interval per endpoint.
|
|
Unit: detected CRC Anomalies
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 5 }
|
|
|
|
hwShdslEndpointThreshLOSWSDs OBJECT-TYPE
|
|
SYNTAX Hdsl2ShdslPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of Loss of Sync Word (LOSW) Seconds
|
|
in the downstream direction within any given 15-minute performance data collection interval.
|
|
If the value of LOSW in a particular 15-minute collection interval reaches/exceeds this value,
|
|
an hwShdslLOSWExceedThreshDsAlarmTrap MAY be generated.
|
|
At most, one notification will be sent per interval per endpoint.
|
|
Unit: seconds
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 6 }
|
|
|
|
hwShdslEndpointThreshUASDs OBJECT-TYPE
|
|
SYNTAX Hdsl2ShdslPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of Unavailable Seconds (UAS) in
|
|
the downstream direction within any given 15-minute performance data collection interval.
|
|
If the value of UAS in a particular 15-minute collection interval reaches/exceeds this value,
|
|
an hwShdslUASSExceedThreshDsAlarmTrap MAY be generated.
|
|
At most, one notification will be sent per interval per endpoint.
|
|
Unit: seconds
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 7 }
|
|
|
|
hwShdslEndpointAlarmConfProfileDyingGaspCfg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables the report of LOSS-OF-POWER alarm in a SHDSL line.
|
|
Options:
|
|
1. enable(1) - SHDSL alarm profile DyingGasp switch is enable
|
|
2. disable(2) - SHDSL alarm profile DyingGasp switch is disable
|
|
"
|
|
DEFVAL { disable }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 8 }
|
|
|
|
hwShdslEndpointAlarmConfProfileActiveFailAlarmSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enable/disable the active fail alarm switch.
|
|
Options:
|
|
1. enable(1) - The active fail alarm switch is enabled
|
|
2. disable(2) - The active fail alarm switch is disabled
|
|
"
|
|
DEFVAL { enable }
|
|
::= { hwShdslEndpointAlarmConfProfileEntry 9 }
|
|
|
|
hwShdslWorkModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwShdslWorkModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table defines the work mode of SHGM board.
|
|
The index of this table is a combination of hwShdslFrameID, hwShdslSlotID and hwShdslGroupID.
|
|
"
|
|
::= { hwShdsl 15 }
|
|
|
|
hwShdslWorkModeEntry OBJECT-TYPE
|
|
SYNTAX HwShdslWorkModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table defines the work mode of SHGM board.
|
|
The index of this entry is a combination of hwShdslFrameID, hwShdslSlotID and hwShdslGroupID.
|
|
"
|
|
INDEX { hwShdslFrameID, hwShdslSlotID, hwShdslGroupID }
|
|
::= { hwShdslWorkModeTable 1 }
|
|
|
|
HwShdslWorkModeEntry ::=
|
|
SEQUENCE {
|
|
hwShdslGroupID Integer32,
|
|
hwShdsWorkMode INTEGER
|
|
}
|
|
|
|
hwShdslGroupID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object defines the group id of the board.
|
|
Group 0 corresponds to port 0 to 15, group 1 corresponds to port 16 to 31 and group -1 corresponds to port 0 to 31.
|
|
SHGM service board supports this configuration.
|
|
"
|
|
::= { hwShdslWorkModeEntry 1 }
|
|
|
|
hwShdsWorkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
atmAndptm(1),
|
|
ptm(2),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object defines the work mode of the board, only SHGM service board support this configuration.
|
|
Options:
|
|
1. atmAndptm(1) - The work mode of this group is atmAndptm, both atm and ptm service flow can be configured in the member port, while mtu of ptm service is limit to 1594.
|
|
2. ptm(2) - The work mode of this group is ptm, only ptm service flow can be configured in the member port, while mtu of ptm service can up to 2000.
|
|
3. invalid(-1) - Invalid value
|
|
"
|
|
::= { hwShdslWorkModeEntry 2 }
|
|
|
|
END
|