2566 lines
93 KiB
Plaintext
2566 lines
93 KiB
Plaintext
-- ==================================================================
|
|
-- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description: HUAWEI Layer Two MAC management MIB
|
|
-- Reference:
|
|
-- Version: V2.18
|
|
-- History:
|
|
-- ==================================================================
|
|
-- HUAWEI-MPLSOAM-MIB.mib
|
|
-- ==================================================================
|
|
--
|
|
-- Variables and types to be imported
|
|
--
|
|
-- ==================================================================
|
|
|
|
HUAWEI-MPLSOAM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hwMpls
|
|
FROM HUAWEI-MIB
|
|
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
DisplayString, TruthValue, TimeStamp, RowStatus, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName
|
|
FROM HUAWEI-MPLS-EXTEND-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB;
|
|
|
|
|
|
-- April 27, 2005 at 17:24 GMT
|
|
hwMplsOam MODULE-IDENTITY
|
|
LAST-UPDATED "201712181700Z"
|
|
ORGANIZATION
|
|
"Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION
|
|
"The HUAWEI-MPLSOAM-MIB contains objects to configure OAM module.
|
|
The Operation, Administration and Maintenance (OAM)
|
|
is an effective means for decreasing the cost of network maintenance.
|
|
The MPLS OAM is used to administrate and maintain MPLS. "
|
|
|
|
-- Revision history
|
|
|
|
REVISION "201712181700Z"
|
|
DESCRIPTION "V2.18, add import hwMplsTunnelSignalledTunnelName, and modify related alarm"
|
|
|
|
REVISION "201708171655Z"
|
|
DESCRIPTION "V2.17, modify hwMplsOamL2vcOutDefect, hwMplsOamL2vcInDefect, hwMplsOamL2vcAva, hwMplsOamL2vcUnAva"
|
|
|
|
REVISION "201707051048Z"
|
|
DESCRIPTION "V2.16, modify hwMplsOamBidirectionalTunnelInDefect, hwMplsOamL2vcInDefect, hwMplsOamL2vcAva, hwMplsOamBidirectionalTunnelAva"
|
|
|
|
REVISION "201701101505Z"
|
|
DESCRIPTION "V2.15, add hwMplsApsPathMisMatch, hwMplsApsPathMisMatchRecovery, hwMplsApsTypeMisMatch, hwMplsApsTypeMisMatchRecovery"
|
|
|
|
REVISION "201701091728Z"
|
|
DESCRIPTION "V2.14, add hwMplsApsPathMisMatch, hwMplsApsPathMisMatchRecovery, hwMplsApsTypeMisMatch, hwMplsApsTypeMisMatchRecovery"
|
|
|
|
REVISION "201408211052Z"
|
|
DESCRIPTION "V2.13, add hwMplsApsDegraded, hwMplsApsDegradedRecovery, hwMplsApsSwitchFail, hwMplsApsSwitchFailRecovery"
|
|
|
|
REVISION "201308271600Z"
|
|
DESCRIPTION "V2.12, modify the scope of hwMplsOamL2vcVcType."
|
|
|
|
REVISION "201302181600Z"
|
|
DESCRIPTION "V2.11, modify the MAX-ACCESS of hwMplsPsRowStatus to read-create."
|
|
|
|
REVISION "200504271600Z"
|
|
DESCRIPTION "V1.00, initial version."
|
|
|
|
::= { hwMpls 7 }
|
|
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- Node definitions
|
|
--
|
|
|
|
hwMplsOamPs OBJECT IDENTIFIER ::= { hwMplsOam 1 }
|
|
|
|
|
|
hwMplsOamObjects OBJECT IDENTIFIER ::= { hwMplsOamPs 1 }
|
|
hwMplsOamCapability OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether OAM is globally capable.
|
|
0: incapable;
|
|
1: capable;
|
|
2: capable(basedItu);
|
|
The default value is incapable."
|
|
::= { hwMplsOamObjects 1 }
|
|
|
|
|
|
hwMplsOamIgrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsOamIgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-LSP MPLS OAM capability and
|
|
associated information, such as IgrTunnName and IgrDetType."
|
|
::= { hwMplsOamObjects 2 }
|
|
|
|
|
|
hwMplsOamIgrEntry OBJECT-TYPE
|
|
SYNTAX HwMplsOamIgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every LSP
|
|
capable of supporting MPLS OAM at ingress."
|
|
INDEX { hwMplsOamIgrIndex }
|
|
::= { hwMplsOamIgrTable 1 }
|
|
|
|
|
|
HwMplsOamIgrEntry ::=
|
|
SEQUENCE {
|
|
hwMplsOamIgrIndex
|
|
Unsigned32,
|
|
hwMplsOamIgrTunnName
|
|
OCTET STRING,
|
|
hwMplsOamIgrDetType
|
|
INTEGER,
|
|
hwMplsOamIgrDetFreq
|
|
INTEGER,
|
|
hwMplsOamIgrRevType
|
|
INTEGER,
|
|
hwMplsOamIgrRevLspName
|
|
OCTET STRING,
|
|
hwMplsOamIgrRevLsrId
|
|
IpAddress,
|
|
hwMplsOamIgrRevSessTunnId
|
|
Integer32,
|
|
hwMplsOamIgrEnable
|
|
INTEGER,
|
|
hwMplsOamIgrValid
|
|
INTEGER,
|
|
hwMplsOamIgrAvaState
|
|
INTEGER,
|
|
hwMplsOamIgrDefectType
|
|
INTEGER,
|
|
hwMplsOamIgrCompatibilityMode
|
|
INTEGER,
|
|
hwMplsOamIgrBDIFreq
|
|
INTEGER,
|
|
hwMplsOamIgrRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
hwMplsOamIgrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the detected tunnel."
|
|
::= { hwMplsOamIgrEntry 1 }
|
|
|
|
|
|
hwMplsOamIgrTunnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a tunnel.
|
|
For ingress, it means the tunnel name of the detected LSP.
|
|
For egress, it means the tunnel name of the reverse LSP."
|
|
::= { hwMplsOamIgrEntry 2 }
|
|
|
|
|
|
hwMplsOamIgrDetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are two types of OAM packets, CV and FFD.
|
|
The CV flow is generated at the source LSR of the LSP with
|
|
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
|
|
FFD provides failure detection option for an LSP independent
|
|
of the CV based availability model and is not tied to the
|
|
CV insertion rate. Insertion rates at 1/s or faster may
|
|
also be used.
|
|
The CV/FFD packet contains a network-unique identifier (TTSI)
|
|
so that all types of defects can be detected.
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hwMplsOamIgrEntry 3 }
|
|
|
|
|
|
hwMplsOamIgrDetFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cv1000ms(0),
|
|
ffd10ms2(1),
|
|
ffd20ms3(2),
|
|
ffd50ms4(3),
|
|
ffd100ms5(4),
|
|
ffd200ms6(5),
|
|
ffd500ms7(6),
|
|
ffd3ms8(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For CV: the frequency is static, per second.
|
|
For FFD: the frequency is set by user. The value
|
|
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
|
|
Any other frequency is wrong.
|
|
0: 1000ms(only for cv);
|
|
1: 10ms;
|
|
2: 20ms;
|
|
3: 50ms;
|
|
4: 100ms;
|
|
5: 200ms;
|
|
6: 500ms;
|
|
7: 3ms."
|
|
::= { hwMplsOamIgrEntry 4 }
|
|
|
|
|
|
hwMplsOamIgrRevType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
private(1),
|
|
share(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When an LSP is found to be in defect, the sink LSR if the LSP
|
|
should send BDI to inform the source LSR of the LSP, the BDI is
|
|
transferred through the reverse LSP.
|
|
The type of reverse LSP can be private or shared.
|
|
If private, then the reverse LSP can be used only when the only
|
|
LSP is in defect;
|
|
If shared, the reverse LSP which is shared between many forward
|
|
LSPs, whose source LSRs are the same and sink LSRs are the same.
|
|
1: private;
|
|
2: share."
|
|
::= { hwMplsOamIgrEntry 5 }
|
|
|
|
|
|
hwMplsOamIgrRevLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates name of the reverse LSP."
|
|
::= { hwMplsOamIgrEntry 6 }
|
|
|
|
|
|
hwMplsOamIgrRevLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only for ingress, the object indicates the ingress LSR ID of the
|
|
reverse LSP,, expressed in IP address."
|
|
::= { hwMplsOamIgrEntry 7 }
|
|
|
|
|
|
hwMplsOamIgrRevSessTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only for ingress, the object indicates the session tunnel ID of
|
|
the reverse LSP."
|
|
::= { hwMplsOamIgrEntry 8 }
|
|
|
|
|
|
hwMplsOamIgrEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether one LSP is OAM enable.
|
|
If disable, LSP is not monitored;
|
|
If enable, CV/FFD is generated at the source LSR of the LSP and
|
|
checked at the sink LSR of the LSP,and user can set
|
|
other configuration.
|
|
0: The OAM function is disabled on the ingress;
|
|
1: The OAM function is enabled on the ingress."
|
|
::= { hwMplsOamIgrEntry 9 }
|
|
|
|
|
|
hwMplsOamIgrValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop(0),
|
|
start(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: stop detect;
|
|
1: start detect."
|
|
::= { hwMplsOamIgrEntry 10 }
|
|
|
|
|
|
hwMplsOamIgrAvaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
available(0),
|
|
unavailable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the LSP Timer (T1) expires, then the LSP enters the
|
|
Unavailable state. The start point of the Unavailable state
|
|
is deemed to be at the entry into the LSP defect state.
|
|
An LSP re-enters the Available state after the LSP Defect state
|
|
exists first.
|
|
T1 defines the length of time the LSP is in the Defect state
|
|
before declaring an LSP Unavailable or returning to defect
|
|
free state.
|
|
0: available state;
|
|
1: unavailable state."
|
|
::= { hwMplsOamIgrEntry 11 }
|
|
|
|
|
|
hwMplsOamIgrDefectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nondefect(0),
|
|
dServer(1),
|
|
dPeerMe(2),
|
|
dLOCV(3),
|
|
dTTSIMismatch(4),
|
|
dTTSIMismerge(5),
|
|
dExcess(6),
|
|
dUnknown(7),
|
|
dOamFail(8),
|
|
dIngressDown(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defect is defined as interruption of the capability of a
|
|
transport entity (e.g., network connection) to transfer user
|
|
or OAM information. There are six types of defect:
|
|
0: no defect;
|
|
1: dServer;
|
|
2: dPeerMe;
|
|
3: dLOCV, Loss of Connectivity Verification defect;
|
|
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
|
|
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect;
|
|
6: dExcess, Receiving excess rate of CV/FFD;
|
|
7: dUnknown, Unknown defect in the MPLS network..
|
|
8: dOamFail, AutoProtocal timer expires.
|
|
9: dIngressDown."
|
|
::= { hwMplsOamIgrEntry 12 }
|
|
|
|
hwMplsOamIgrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and
|
|
delete a row in this table."
|
|
::= { hwMplsOamIgrEntry 13 }
|
|
|
|
hwMplsOamIgrCompatibilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ptnMode(1),
|
|
routerMode(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1: PtnMode;
|
|
2: RouterMode;
|
|
Valid only for the ingress configuration."
|
|
::= { hwMplsOamIgrEntry 14 }
|
|
|
|
hwMplsOamIgrBDIFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perSecond(1),
|
|
detectFrequency(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BDI is generated at the trail termination source point of
|
|
a return path in response to a defect detected at the trail
|
|
termination sink point of an LSP in the forwarding direction.
|
|
The frequency of BDI can be set by user.
|
|
1: perSecond;
|
|
2: same as detect frequency."
|
|
::= { hwMplsOamIgrEntry 15 }
|
|
|
|
hwMplsOamEgrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsOamEgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-LSP MPLS OAM capability and
|
|
associated information, such as DetectType, DetectFrequency."
|
|
::= { hwMplsOamObjects 3 }
|
|
|
|
|
|
hwMplsOamEgrEntry OBJECT-TYPE
|
|
SYNTAX HwMplsOamEgrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every LSP
|
|
capable of supporting MPLS OAM at egress."
|
|
INDEX { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId }
|
|
::= { hwMplsOamEgrTable 1 }
|
|
|
|
|
|
HwMplsOamEgrEntry ::=
|
|
SEQUENCE {
|
|
hwMplsOamEgrLspName
|
|
OCTET STRING,
|
|
hwMplsOamEgrLsrId
|
|
IpAddress,
|
|
hwMplsOamEgrSessTunnId
|
|
Integer32,
|
|
hwMplsOamEgrDetType
|
|
INTEGER,
|
|
hwMplsOamEgrDetFreq
|
|
INTEGER,
|
|
hwMplsOamEgrRevType
|
|
INTEGER,
|
|
hwMplsOamEgrRevTunnName
|
|
OCTET STRING,
|
|
hwMplsOamEgrAutoEn
|
|
INTEGER,
|
|
hwMplsOamEgrAutoOvertime
|
|
Integer32,
|
|
hwMplsOamEgrBDIFreq
|
|
INTEGER,
|
|
hwMplsOamEgrEnable
|
|
INTEGER,
|
|
hwMplsOamEgrValid
|
|
INTEGER,
|
|
hwMplsOamEgrAvaState
|
|
INTEGER,
|
|
hwMplsOamEgrDefectType
|
|
INTEGER,
|
|
hwMplsOamEgrRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwMplsOamEgrLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the name of static LSP at egress."
|
|
::= { hwMplsOamEgrEntry 1 }
|
|
|
|
|
|
hwMplsOamEgrLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the Ingress LSR ID of the LSP."
|
|
::= { hwMplsOamEgrEntry 2 }
|
|
|
|
|
|
hwMplsOamEgrSessTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the the Ingress session tunnel ID of the LSP.."
|
|
::= { hwMplsOamEgrEntry 3 }
|
|
|
|
|
|
hwMplsOamEgrDetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(0),
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: invalid, if auto-protocol, this detect type is invalid;
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hwMplsOamEgrEntry 4 }
|
|
|
|
|
|
hwMplsOamEgrDetFreq OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
cv1000ms(0),
|
|
ffd10ms2(1),
|
|
ffd20ms3(2),
|
|
ffd50ms4(3),
|
|
ffd100ms5(4),
|
|
ffd200ms6(5),
|
|
ffd500ms7(6),
|
|
invalid8(7),
|
|
ffd3ms9(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: 1000ms(only for cv);
|
|
1: 10ms;
|
|
2: 20ms;
|
|
3: 50ms;
|
|
4: 100ms;
|
|
5: 200ms;
|
|
6: 500ms;
|
|
7: invalid;
|
|
8: 3ms."
|
|
::= { hwMplsOamEgrEntry 5 }
|
|
|
|
|
|
hwMplsOamEgrRevType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(0),
|
|
private(1),
|
|
share(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When an LSP is found to be in defect, the sink LSR of the LSP
|
|
should send BDI to inform the source LSR of the LSP,the BDI is
|
|
transferred through the reverse LSP.
|
|
The type of reverse LSP can be private or shared.
|
|
If private, then the reverse LSP can be used only when the only
|
|
LSP in defect;
|
|
If shared, the reverse LSP, which is shared between many forward
|
|
LSPs that have the same source LSRs and sink LSRs.
|
|
0: invalid, when the reverse LSR does not exist;
|
|
1: private;
|
|
2: share."
|
|
::= { hwMplsOamEgrEntry 6 }
|
|
|
|
|
|
hwMplsOamEgrRevTunnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the name of a reverse tunnel."
|
|
::= { hwMplsOamEgrEntry 7 }
|
|
|
|
|
|
hwMplsOamEgrAutoEn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If autoprotocol, then the egress can process extended FDI sent
|
|
by ingress.
|
|
0: disable;
|
|
1: enable;
|
|
Valid only for the egress configuration."
|
|
::= { hwMplsOamEgrEntry 8 }
|
|
|
|
|
|
hwMplsOamEgrAutoOvertime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time is set at the egress.
|
|
If the egress receives CV/FFD, it records the parameters
|
|
included in the packet, such as OAM type and frequency.
|
|
If the egress does not receive any OAM packet before the timer
|
|
expires, the sink LSR will send BDI with dLOCV defect.
|
|
Valid only for the egress configuration."
|
|
::= { hwMplsOamEgrEntry 9 }
|
|
|
|
|
|
hwMplsOamEgrBDIFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perSecond(0),
|
|
detectFrequency(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BDI is generated at the trail termination source point of
|
|
a return path in response to a defect detected at the trail
|
|
termination sink point of an LSP in the forwarding direction.
|
|
The frequency of BDI can be set by user.
|
|
Only valid for egress configuration.
|
|
The default value is detect frequency and it is valid only when a
|
|
backward-LSP exists.
|
|
0: perSecond;
|
|
1: same as detect frequency."
|
|
::= { hwMplsOamEgrEntry 10 }
|
|
|
|
|
|
hwMplsOamEgrEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether one LSP is enabled with OAM.
|
|
If disable, LSP is not monitored;
|
|
If enable, CV/FFD is generated at the source LSR of the LSP and
|
|
checked at the sink LSR of the LSP, and user can set
|
|
other configuration.
|
|
0: The OAM function is disabled on the egress;
|
|
1: The OAM function is enabled on the egress."
|
|
::= { hwMplsOamEgrEntry 11 }
|
|
|
|
|
|
hwMplsOamEgrValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop(1),
|
|
start(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: stop detect;
|
|
2: start detect."
|
|
::= { hwMplsOamEgrEntry 12 }
|
|
|
|
|
|
hwMplsOamEgrAvaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
available(0),
|
|
unavailable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the LSP Timer (T1) expires, then the LSP enters the
|
|
Unavailable state. The start point of the Unavailable state
|
|
is deemed to be at the entry into the LSP defect state.
|
|
An LSP re-enters the Available state after the LSP Defect State.
|
|
first exists.
|
|
T1 defines the length of time the LSP is in the Defect state
|
|
before declaring an LSP Unavailable or returning to defect
|
|
free state
|
|
0: available state;
|
|
1: unavailable state."
|
|
::= { hwMplsOamEgrEntry 13 }
|
|
|
|
|
|
hwMplsOamEgrDefectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nondefect(0),
|
|
dServer(1),
|
|
dPeerMe(2),
|
|
dLOCV(3),
|
|
dTTSIMismatch(4),
|
|
dTTSIMismerge(5),
|
|
dExcess(6),
|
|
dUnknown(7),
|
|
dOamFail(8),
|
|
dEgressDown(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: no defect;
|
|
1: dServer,
|
|
2: dPeerMe,
|
|
3: dLOCV, Loss of Connectivity Verification defect;
|
|
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
|
|
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.;
|
|
6: dExcess, Receiving excess rate of CV/FFD;
|
|
7: dUnknown, Unknown defect in the MPLS network.
|
|
8: dOamFail, AutoProtocal timer expires.
|
|
9: dEgressDown."
|
|
::= { hwMplsOamEgrEntry 14 }
|
|
|
|
|
|
|
|
hwMplsOamEgrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and
|
|
delete a row in this table."
|
|
::= { hwMplsOamEgrEntry 15 }
|
|
|
|
|
|
hwMplsOamRlsnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsOamRlsnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies RLSN capability and
|
|
associated information, such as RlsnLsrId and RlsnLsrId."
|
|
::= { hwMplsOamObjects 4 }
|
|
|
|
|
|
hwMplsOamRlsnEntry OBJECT-TYPE
|
|
SYNTAX HwMplsOamRlsnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR to binding the name, lsr-id and tunnel-id of the LSP at egress."
|
|
INDEX { hwMplsOamRlsnLspName, hwMplsOamRlsnLsrId, hwMplsOamRlsnSessTunnId, hwMplsOamRlsnIfIndex }
|
|
::= { hwMplsOamRlsnTable 1 }
|
|
|
|
|
|
HwMplsOamRlsnEntry ::=
|
|
SEQUENCE {
|
|
hwMplsOamRlsnLspName
|
|
OCTET STRING,
|
|
hwMplsOamRlsnLsrId
|
|
IpAddress,
|
|
hwMplsOamRlsnSessTunnId
|
|
Integer32,
|
|
hwMplsOamRlsnIfIndex
|
|
Integer32,
|
|
hwMplsOamRlsnIfName
|
|
OCTET STRING,
|
|
hwMplsOamRlsnIsDown
|
|
INTEGER,
|
|
hwMplsOamRlsnRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
hwMplsOamRlsnLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For egress, the object indicates name of the LSP."
|
|
::= { hwMplsOamRlsnEntry 1 }
|
|
|
|
|
|
hwMplsOamRlsnLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For egress, the object indicates the Ingress LSR ID of the LSP"
|
|
::= { hwMplsOamRlsnEntry 2 }
|
|
|
|
|
|
hwMplsOamRlsnSessTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For egress, the object indicates the Ingress session tunnel ID
|
|
of the LSP"
|
|
::= { hwMplsOamRlsnEntry 3 }
|
|
|
|
|
|
hwMplsOamRlsnIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the index of outbound interface."
|
|
::= { hwMplsOamRlsnEntry 4 }
|
|
|
|
|
|
hwMplsOamRlsnIfName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the name of outbound interface."
|
|
::= { hwMplsOamRlsnEntry 5 }
|
|
|
|
|
|
hwMplsOamRlsnIsDown OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: up
|
|
2: down"
|
|
::= { hwMplsOamRlsnEntry 6 }
|
|
|
|
|
|
hwMplsOamRlsnRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and
|
|
delete a row in this table. "
|
|
::= { hwMplsOamRlsnEntry 7 }
|
|
|
|
hwMplsOamView OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mplsOam(1),
|
|
null(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Create or delete the MPLS OAM view.
|
|
1: create mplsOam;
|
|
0: delete mplsOam;"
|
|
::= { hwMplsOamObjects 5 }
|
|
|
|
|
|
hwMplsOamL2vcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsOamL2vcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies PW MPLS OAM capability and
|
|
associated information, such as DetType and DetFrequence."
|
|
::= { hwMplsOamObjects 6 }
|
|
|
|
|
|
hwMplsOamL2vcEntry OBJECT-TYPE
|
|
SYNTAX HwMplsOamL2vcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by binding the peer-ip,
|
|
vc-type and vc-id."
|
|
INDEX { hwMplsOamL2vcPeerIp,hwMplsOamL2vcVcType,hwMplsOamL2vcVcId }
|
|
::= { hwMplsOamL2vcTable 1 }
|
|
|
|
|
|
HwMplsOamL2vcEntry ::=
|
|
SEQUENCE {
|
|
hwMplsOamL2vcPeerIp
|
|
IpAddress,
|
|
hwMplsOamL2vcVcType
|
|
INTEGER,
|
|
hwMplsOamL2vcVcId
|
|
Unsigned32,
|
|
hwMplsOamL2vcRemotePeerIp
|
|
IpAddress,
|
|
hwMplsOamL2vcRemoteVcType
|
|
INTEGER,
|
|
hwMplsOamL2vcRemoteVcId
|
|
Unsigned32,
|
|
hwMplsOamL2vcDetType
|
|
INTEGER,
|
|
hwMplsOamL2vcDetFreq
|
|
INTEGER,
|
|
hwMplsOamL2vcRevDetType
|
|
INTEGER,
|
|
hwMplsOamL2vcRevDetFreq
|
|
INTEGER,
|
|
hwMplsOamL2vcSendEnable
|
|
INTEGER,
|
|
hwMplsOamL2vcReceiveEnable
|
|
INTEGER,
|
|
hwMplsOamL2vcAutoProlEn
|
|
INTEGER,
|
|
hwMplsOamL2vcAutoOvertime
|
|
Integer32,
|
|
hwMplsOamL2vcValid
|
|
INTEGER,
|
|
hwMplsOamL2vcAvaState
|
|
INTEGER,
|
|
hwMplsOamL2vcDefectType
|
|
INTEGER,
|
|
hwMplsOamL2vcBdiDefectType
|
|
INTEGER,
|
|
hwMplsOamL2vcCompatibilityMode
|
|
INTEGER,
|
|
hwMplsOamL2vcBDIFreq
|
|
INTEGER,
|
|
hwMplsOamL2vcRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
hwMplsOamL2vcPeerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the peer ip address."
|
|
::= { hwMplsOamL2vcEntry 1 }
|
|
|
|
|
|
hwMplsOamL2vcVcType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fr(1),
|
|
atmAal5Sdu(2),
|
|
atmTransCell(3),
|
|
vlan(4),
|
|
ethernet(5),
|
|
hdlc(6),
|
|
ppp(7),
|
|
atmNto1Vcc(9),
|
|
atmNto1Vpc(10),
|
|
ipLayer2(11),
|
|
atm1to1Vcc(12),
|
|
atm1to1Vpc(13),
|
|
atmAal5Pdu(14),
|
|
cep(16),
|
|
satopE1(17),
|
|
satopT1(18),
|
|
cesopsnBasic(21),
|
|
ipInterworking(64),
|
|
unknown(0)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are seventeen types of vc.
|
|
1: fr;
|
|
2: atmAal5Sdu;
|
|
3: atmTransCell;
|
|
4: vlan;
|
|
5: ethernet;
|
|
6: hdlc;
|
|
7: ppp;
|
|
9: atmNto1Vcc;
|
|
10:atmNto1Vpc;
|
|
11:ipLayer2;
|
|
12:atm1to1Vcc;
|
|
13:atm1to1Vpc;
|
|
14:atmAal5Pdu;
|
|
16:cep;
|
|
17:satopE1;
|
|
18:satopT1;
|
|
21:cesopsnBasic;
|
|
64:ipInterworking;
|
|
0:unknown."
|
|
::= { hwMplsOamL2vcEntry 2 }
|
|
|
|
|
|
hwMplsOamL2vcVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the vc id of pw type."
|
|
::= { hwMplsOamL2vcEntry 3 }
|
|
|
|
|
|
hwMplsOamL2vcRemotePeerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the remote peer ip address."
|
|
::= { hwMplsOamL2vcEntry 4 }
|
|
|
|
|
|
hwMplsOamL2vcRemoteVcType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fr(1),
|
|
atmAal5Sdu(2),
|
|
atmTransCell(3),
|
|
vlan(4),
|
|
ethernet(5),
|
|
hdlc(6),
|
|
ppp(7),
|
|
atmNto1Vcc(9),
|
|
atmNto1Vpc(10),
|
|
ipLayer2(11),
|
|
atm1to1Vcc(12),
|
|
atm1to1Vpc(13),
|
|
atmAal5Pdu(14),
|
|
cep(16),
|
|
satopE1(17),
|
|
satopT1(18),
|
|
cesopsnBasic(21),
|
|
ipInterworking(64),
|
|
unknown(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are seventeen types of vc.
|
|
1: fr;
|
|
2: atmAal5Sdu;
|
|
3: atmTransCell;
|
|
4: vlan;
|
|
5: ethernet;
|
|
6: hdlc;
|
|
7: ppp;
|
|
9: atmNto1Vcc;
|
|
10:atmNto1Vpc;
|
|
11:ipLayer2;
|
|
12:atm1to1Vcc;
|
|
13:atm1to1Vpc;
|
|
14:atmAal5Pdu;
|
|
16:cep;
|
|
17:satopE1;
|
|
18:satopT1;
|
|
21:cesopsnBasic;
|
|
64:ipInterworking;
|
|
0:unknown."
|
|
::= { hwMplsOamL2vcEntry 5 }
|
|
|
|
|
|
hwMplsOamL2vcRemoteVcId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the remote vc id of pw type."
|
|
::= { hwMplsOamL2vcEntry 6 }
|
|
|
|
|
|
hwMplsOamL2vcDetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are two types of OAM packets, CV and FFD.
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hwMplsOamL2vcEntry 7 }
|
|
|
|
|
|
hwMplsOamL2vcDetFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cv1000ms(0),
|
|
ffd10ms2(1),
|
|
ffd20ms3(2),
|
|
ffd50ms4(3),
|
|
ffd100ms5(4),
|
|
ffd200ms6(5),
|
|
ffd500ms7(6),
|
|
ffd3ms8(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For CV: the frequency is static, per second.
|
|
For FFD: the frequency is set by user. The value
|
|
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
|
|
Any other frequency is wrong.
|
|
0: 1000ms(only for cv);
|
|
1: 10ms;
|
|
2: 20ms;
|
|
3: 50ms;
|
|
4: 100ms;
|
|
5: 200ms;
|
|
6: 500ms;
|
|
7: 3ms."
|
|
::= { hwMplsOamL2vcEntry 8 }
|
|
|
|
|
|
hwMplsOamL2vcRevDetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(0),
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: invalid;
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hwMplsOamL2vcEntry 9 }
|
|
|
|
|
|
hwMplsOamL2vcRevDetFreq OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
cv1000ms(0),
|
|
ffd10ms2(1),
|
|
ffd20ms3(2),
|
|
ffd50ms4(3),
|
|
ffd100ms5(4),
|
|
ffd200ms6(5),
|
|
ffd500ms7(6),
|
|
invalid8(7),
|
|
ffd3ms9(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For CV: the frequency is static, per second.
|
|
For FFD: the frequency is set by user. The value
|
|
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
|
|
Any other frequency is wrong.
|
|
0: 1000ms(only for cv);
|
|
1: 10ms;
|
|
2: 20ms;
|
|
3: 50ms;
|
|
4: 100ms;
|
|
5: 200ms;
|
|
6: 500ms;
|
|
7: invalid;
|
|
8: 3ms."
|
|
::= { hwMplsOamL2vcEntry 10 }
|
|
|
|
|
|
hwMplsOamL2vcSendEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: The OAM Send function is Disabled;
|
|
1: The OAM Send function is Eabled;"
|
|
::= { hwMplsOamL2vcEntry 11 }
|
|
|
|
hwMplsOamL2vcReceiveEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: The OAM Receive function is Disabled;
|
|
1: The OAM Receive function is Eabled;"
|
|
::= { hwMplsOamL2vcEntry 12 }
|
|
|
|
hwMplsOamL2vcAutoProlEn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: disable;
|
|
1: enable;"
|
|
::= { hwMplsOamL2vcEntry 13 }
|
|
|
|
|
|
hwMplsOamL2vcAutoOvertime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the oam receives CV/FFD, it records the parameters
|
|
included in the packet, such as OAM type and frequency.
|
|
If the oam does not receive any CV/FFD packet before the timer
|
|
expires, It will send BDI with dLOCV defect."
|
|
::= { hwMplsOamL2vcEntry 14 }
|
|
|
|
|
|
hwMplsOamL2vcValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop(1),
|
|
start(2),
|
|
ready(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: stop detect;
|
|
2: start detect;
|
|
3: ready."
|
|
::= { hwMplsOamL2vcEntry 15 }
|
|
|
|
|
|
hwMplsOamL2vcAvaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
available(0),
|
|
unavailable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: available state;
|
|
1: unavailable state."
|
|
::= { hwMplsOamL2vcEntry 16 }
|
|
|
|
|
|
hwMplsOamL2vcDefectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nondefect(0),
|
|
dServer(1),
|
|
dPeerMe(2),
|
|
dLOCV(3),
|
|
dTTSIMismatch(4),
|
|
dTTSIMismerge(5),
|
|
dExcess(6),
|
|
dUnknown(7),
|
|
dOamFail(8),
|
|
pwDown(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: no defect;
|
|
1: dServer,
|
|
2: dPeerMe,
|
|
3: dLOCV, Loss of Connectivity Verification defect;
|
|
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
|
|
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.;
|
|
6: dExcess, Receiving excess rate of CV/FFD;
|
|
7: dUnknown, Unknown defect in the MPLS network.
|
|
8: dOamFail, AutoProtocal timer expires.
|
|
9: pwDown, PW down."
|
|
::= { hwMplsOamL2vcEntry 17 }
|
|
|
|
|
|
hwMplsOamL2vcBdiDefectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nondefect(0),
|
|
dServer(1),
|
|
dPeerMe(2),
|
|
dLOCV(3),
|
|
dTTSIMismatch(4),
|
|
dTTSIMismerge(5),
|
|
dExcess(6),
|
|
dUnknown(7),
|
|
dOamFail(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: no defect;
|
|
1: dServer,
|
|
2: dPeerMe,
|
|
3: dLOCV, Loss of Connectivity Verification defect;
|
|
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
|
|
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.;
|
|
6: dExcess, Receiving excess rate of CV/FFD;
|
|
7: dUnknown, Unknown defect in the MPLS network.
|
|
8: dOamFail, AutoProtocal timer expires."
|
|
::= { hwMplsOamL2vcEntry 18 }
|
|
|
|
|
|
hwMplsOamL2vcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and
|
|
delete a row in this table. "
|
|
::= { hwMplsOamL2vcEntry 30 }
|
|
|
|
|
|
hwMplsOamL2vcCompatibilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ptnMode(1),
|
|
routerMode(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1: ptnMode;
|
|
2: routerMode;
|
|
Valid only for the l2vc configuration."
|
|
::= { hwMplsOamL2vcEntry 31 }
|
|
|
|
|
|
hwMplsOamL2vcBDIFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perSecond(1),
|
|
detectFrequency(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BDI is generated at the trail termination source point of
|
|
a return path in response to a defect detected at the trail
|
|
termination sink point of an LSP in the forwarding direction.
|
|
The frequency of BDI can be set by user.
|
|
1: perSecond;
|
|
2: same as detect frequency."
|
|
::= { hwMplsOamL2vcEntry 32 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsOamBidirectionalTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies Static Co-Route MPLS OAM capability and
|
|
associated information, such as DetType and DetFrequence."
|
|
::= { hwMplsOamObjects 7 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelEntry OBJECT-TYPE
|
|
SYNTAX HwMplsOamBidirectionalTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by binding the tunnel ifindex."
|
|
INDEX { hwMplsOamBidirectionalTunnelIndex }
|
|
::= { hwMplsOamBidirectionalTunnelTable 1 }
|
|
|
|
|
|
HwMplsOamBidirectionalTunnelEntry ::=
|
|
SEQUENCE {
|
|
hwMplsOamBidirectionalTunnelIndex
|
|
Unsigned32,
|
|
hwMplsOamBidirectionalTunnelTunnName
|
|
OCTET STRING,
|
|
hwMplsOamBidirectionalTunnelDetType
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelDetFreq
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelRevDetType
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelRevDetFreq
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelSendEnable
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelReceiveEnable
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelAutoProtocolEnable
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelAutoOvertime
|
|
Integer32,
|
|
hwMplsOamBidirectionalTunnelValid
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelAvaState
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelDefectType
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelBdiDefectType
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelCompatibilityMode
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelBDIFreq
|
|
INTEGER,
|
|
hwMplsOamBidirectionalTunnelRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an OAM entry in the OAM table."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 1 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelTunnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of a tunnel."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 2 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelDetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There are two types of OAM packets, CV and FFD.
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 3 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelDetFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cv1000ms(0),
|
|
ffd10ms2(1),
|
|
ffd20ms3(2),
|
|
ffd50ms4(3),
|
|
ffd100ms5(4),
|
|
ffd200ms6(5),
|
|
ffd500ms7(6),
|
|
ffd3ms8(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For CV: the frequency is static, per second.
|
|
For FFD: the frequency is set by user. The value
|
|
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
|
|
Any other frequency is wrong.
|
|
0: 1000ms(only for cv);
|
|
1: 10ms;
|
|
2: 20ms;
|
|
3: 50ms;
|
|
4: 100ms;
|
|
5: 200ms;
|
|
6: 500ms;
|
|
7: 3ms."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 4 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelRevDetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalid(0),
|
|
cv(1),
|
|
ffd(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: invalid;
|
|
1: CV;
|
|
2: FFD."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 5 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelRevDetFreq OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
cv1000ms(0),
|
|
ffd10ms2(1),
|
|
ffd20ms3(2),
|
|
ffd50ms4(3),
|
|
ffd100ms5(4),
|
|
ffd200ms6(5),
|
|
ffd500ms7(6),
|
|
invalid8(7),
|
|
ffd3ms9(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For CV: the frequency is static, per second.
|
|
For FFD: the frequency is set by user. The value
|
|
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
|
|
Any other frequency is wrong.
|
|
0: 1000ms(only for cv);
|
|
1: 10ms;
|
|
2: 20ms;
|
|
3: 50ms;
|
|
4: 100ms;
|
|
5: 200ms;
|
|
6: 500ms;
|
|
7: invalid;
|
|
8: 3ms."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 6 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelSendEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: The OAM Send function is Disabled;
|
|
1: The OAM Send function is Eabled;"
|
|
::= { hwMplsOamBidirectionalTunnelEntry 7 }
|
|
|
|
hwMplsOamBidirectionalTunnelReceiveEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: The OAM Receive function is Disabled;
|
|
1: The OAM Receive function is Eabled;"
|
|
::= { hwMplsOamBidirectionalTunnelEntry 8 }
|
|
|
|
hwMplsOamBidirectionalTunnelAutoProtocolEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: disable;
|
|
1: enable;"
|
|
::= { hwMplsOamBidirectionalTunnelEntry 9 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelAutoOvertime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the oam receives CV/FFD, it records the parameters
|
|
included in the packet, such as OAM type and frequency.
|
|
If the oam does not receive any CV/FFD packet before the timer
|
|
expires, It will send BDI with dLOCV defect."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 10 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stop(1),
|
|
start(2),
|
|
ready(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1: stop detect;
|
|
2: start detect;
|
|
3: ready."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 11 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelAvaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
available(0),
|
|
unavailable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: available state;
|
|
1: unavailable state."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 12 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelDefectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nondefect(0),
|
|
dServer(1),
|
|
dPeerMe(2),
|
|
dLOCV(3),
|
|
dTTSIMismatch(4),
|
|
dTTSIMismerge(5),
|
|
dExcess(6),
|
|
dUnknown(7),
|
|
dOamFail(8),
|
|
corouteDown(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: no defect;
|
|
1: dServer,
|
|
2: dPeerMe,
|
|
3: dLOCV, Loss of Connectivity Verification defect;
|
|
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
|
|
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.;
|
|
6: dExcess, Receiving excess rate of CV/FFD;
|
|
7: dUnknown, Unknown defect in the MPLS network.
|
|
8: dOamFail, AutoProtocal timer expires.
|
|
9: corouteDown, coroute down."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 13 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelBdiDefectType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nondefect(0),
|
|
dServer(1),
|
|
dPeerMe(2),
|
|
dLOCV(3),
|
|
dTTSIMismatch(4),
|
|
dTTSIMismerge(5),
|
|
dExcess(6),
|
|
dUnknown(7),
|
|
dOamFail(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: no defect;
|
|
1: dServer,
|
|
2: dPeerMe,
|
|
3: dLOCV, Loss of Connectivity Verification defect;
|
|
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
|
|
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.;
|
|
6: dExcess, Receiving excess rate of CV/FFD;
|
|
7: dUnknown, Unknown defect in the MPLS network.
|
|
8: dOamFail, AutoProtocal timer expires."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 14 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and
|
|
delete a row in this table. "
|
|
::= { hwMplsOamBidirectionalTunnelEntry 15 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelCompatibilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ptnMode(1),
|
|
routerMode(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1: ptnMode;
|
|
2: routerMode;
|
|
Valid only for the bidirectional tunnel configuration."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 16 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelBDIFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perSecond(1),
|
|
detectFrequency(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BDI is generated at the trail termination source point of
|
|
a return path in response to a defect detected at the trail
|
|
termination sink point of an LSP in the forwarding direction.
|
|
The frequency of BDI can be set by user.
|
|
1: perSecond;
|
|
2: same as detect frequency."
|
|
::= { hwMplsOamBidirectionalTunnelEntry 17 }
|
|
|
|
|
|
hwMplsOamTrapOpen OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: disable
|
|
1: enable"
|
|
::= { hwMplsOamObjects 8 }
|
|
|
|
hwMplsOamNotifications OBJECT IDENTIFIER ::= { hwMplsOamPs 2 }
|
|
|
|
|
|
hwMplsOamIgrLSPOutDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
not in the defect state at the LSP ingress."
|
|
::= { hwMplsOamNotifications 1 }
|
|
|
|
|
|
hwMplsOamIgrLSPInDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the defect state at the LSP ingress."
|
|
::= { hwMplsOamNotifications 2 }
|
|
|
|
|
|
hwMplsOamIgrLSPAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the available state at the LSP ingress."
|
|
::= { hwMplsOamNotifications 3 }
|
|
|
|
|
|
|
|
hwMplsOamIgrLSPUnAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the unavailable state at the LSP ingress."
|
|
::= { hwMplsOamNotifications 4 }
|
|
|
|
|
|
hwMplsOamEgrLSPOutDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
not in the defect state at the LSP egress."
|
|
::= { hwMplsOamNotifications 5 }
|
|
|
|
|
|
hwMplsOamEgrLSPInDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the defect state at the LSP egress."
|
|
::= { hwMplsOamNotifications 6 }
|
|
|
|
|
|
hwMplsOamEgrLSPAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the available state at the LSP egress."
|
|
::= { hwMplsOamNotifications 7 }
|
|
|
|
|
|
hwMplsOamEgrLSPUnAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the LSP is found
|
|
in the unavailable state at the LSP egress."
|
|
::= { hwMplsOamNotifications 8 }
|
|
|
|
|
|
hwMplsOamEgrFirstPkt NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrDetType, hwMplsOamEgrDetFreq
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If autoprotocol is enabled, this notification is generated when
|
|
egress receives the first CV/FFD packet."
|
|
::= { hwMplsOamNotifications 9 }
|
|
|
|
|
|
hwMplsOamEgrAutoProFDI NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrEnable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FDI packet is used by the upstream node in an LSP
|
|
to inform the egress of the defect information.
|
|
It is also generated when the auto protocol is enabled,
|
|
with which the LSP ingress notifies the egress to stop
|
|
the OAM detection."
|
|
::= { hwMplsOamNotifications 10 }
|
|
|
|
|
|
hwMplsOamEgrRlsnDown NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamRlsnLspName, hwMplsOamRlsnLsrId, hwMplsOamRlsnIsDown, hwMplsOamRlsnIfName, hwMplsOamRlsnSessTunnId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the Rlsn is down."
|
|
::= { hwMplsOamNotifications 11 }
|
|
|
|
hwMplsOamL2vcOutDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamL2vcPeerIp, hwMplsOamL2vcVcType, hwMplsOamL2vcVcId, hwMplsOamL2vcAvaState, hwMplsOamL2vcDefectType, hwMplsOamL2vcBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OAM detected that the local L2VC exited the defect state."
|
|
::= { hwMplsOamNotifications 12 }
|
|
|
|
|
|
hwMplsOamL2vcInDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamL2vcPeerIp, hwMplsOamL2vcVcType, hwMplsOamL2vcVcId, hwMplsOamL2vcAvaState, hwMplsOamL2vcDefectType, hwMplsOamL2vcBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OAM detected that the local L2VC entered the defect state."
|
|
::= { hwMplsOamNotifications 13 }
|
|
|
|
|
|
hwMplsOamL2vcAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamL2vcPeerIp, hwMplsOamL2vcVcType, hwMplsOamL2vcVcId, hwMplsOamL2vcAvaState, hwMplsOamL2vcDefectType, hwMplsOamL2vcBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OAM detected that the local L2VC entered the available state."
|
|
::= { hwMplsOamNotifications 14 }
|
|
|
|
|
|
hwMplsOamL2vcUnAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamL2vcPeerIp, hwMplsOamL2vcVcType, hwMplsOamL2vcVcId, hwMplsOamL2vcAvaState, hwMplsOamL2vcDefectType, hwMplsOamL2vcBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OAM detected that the local L2VC entered the unavailable state."
|
|
::= { hwMplsOamNotifications 15 }
|
|
|
|
hwMplsOamBidirectionalTunnelOutDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamBidirectionalTunnelIndex, hwMplsOamBidirectionalTunnelAvaState, hwMplsOamBidirectionalTunnelDefectType, hwMplsOamBidirectionalTunnelBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the CO-ROUTE is found
|
|
not in the defect state."
|
|
::= { hwMplsOamNotifications 16 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelInDefect NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamBidirectionalTunnelIndex, hwMplsOamBidirectionalTunnelAvaState, hwMplsOamBidirectionalTunnelDefectType, hwMplsOamBidirectionalTunnelBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the CO-ROUTE is found
|
|
in the defect state."
|
|
::= { hwMplsOamNotifications 17 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamBidirectionalTunnelIndex, hwMplsOamBidirectionalTunnelAvaState, hwMplsOamBidirectionalTunnelDefectType, hwMplsOamBidirectionalTunnelBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the CO-ROUTE is found
|
|
in the available state."
|
|
::= { hwMplsOamNotifications 18 }
|
|
|
|
|
|
hwMplsOamBidirectionalTunnelUnAva NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsOamBidirectionalTunnelIndex, hwMplsOamBidirectionalTunnelAvaState, hwMplsOamBidirectionalTunnelDefectType, hwMplsOamBidirectionalTunnelBdiDefectType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the CO-ROUTE is found
|
|
in the unavailable state."
|
|
::= { hwMplsOamNotifications 19 }
|
|
|
|
|
|
--HUAWEI-MPLSOAM-PS-MIB
|
|
hwMplsPsObjects OBJECT IDENTIFIER ::= { hwMplsOamPs 3 }
|
|
|
|
|
|
hwMplsPsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-protection-group MPLS PS
|
|
capability and associated information.
|
|
"
|
|
::= { hwMplsPsObjects 1 }
|
|
|
|
|
|
hwMplsPsEntry OBJECT-TYPE
|
|
SYNTAX HwMplsPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for every
|
|
protection group capable of supporting mpls ps."
|
|
INDEX { hwMplsPsIndex }
|
|
::= { hwMplsPsTable 1 }
|
|
|
|
|
|
HwMplsPsEntry ::=
|
|
SEQUENCE {
|
|
hwMplsPsIndex
|
|
Unsigned32,
|
|
hwMplsPsType
|
|
Integer32,
|
|
hwMplsPsWorkTunnName
|
|
OCTET STRING,
|
|
hwMplsPsWorkTunnId
|
|
Integer32,
|
|
hwMplsPsProtectTunnName
|
|
OCTET STRING,
|
|
hwMplsPsProtectTunnId
|
|
Integer32,
|
|
hwMplsPsRevertiveMode
|
|
Integer32,
|
|
hwMplsPsWTR
|
|
Integer32,
|
|
hwMplsPsHoldOff
|
|
Integer32,
|
|
hwMplsPsSwitchCondition
|
|
Integer32,
|
|
hwMplsPsWorkTunnelState
|
|
Integer32,
|
|
hwMplsPsProtTunnelState
|
|
Integer32,
|
|
hwMplsPsSwitchResult
|
|
Integer32,
|
|
hwMplsPsCfgType
|
|
Integer32,
|
|
hwMplsPsCfgProtectTunnId
|
|
Integer32,
|
|
hwMplsPsCfgRevertiveMode
|
|
Integer32,
|
|
hwMplsPsCfgWTR
|
|
Integer32,
|
|
hwMplsPsCfgHoldOff
|
|
Integer32,
|
|
hwMplsPsRowStatus
|
|
RowStatus,
|
|
hwMplsPsLocalState
|
|
Integer32
|
|
}
|
|
|
|
hwMplsPsIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an entry in the mplspsEntry.
|
|
|
|
"
|
|
::= { hwMplsPsEntry 1 }
|
|
|
|
|
|
hwMplsPsType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of protection switch,can be 1:1,1+1,shared mesh,
|
|
packet 1+1,the default choice is 1:1.
|
|
In the 1+1 architecture type, a protection LSP is dedicated to
|
|
each working LSP with the working LSP bridged onto the
|
|
protection LSP at the source of the protection domain.
|
|
The traffic on working and protection LSPs is transmitted
|
|
simultaneously to the sink of the protection domain,
|
|
where a selection between the working and protection LSP is
|
|
made, based on some predetermined criteria, such as defect
|
|
indication.
|
|
In the 1:1 architecture type, a protection LSP is dedicated to
|
|
each working LSP. The working traffic is transmitted either by
|
|
working or protection LSP.
|
|
In the shared mesh architecture type, possible sharing of
|
|
protection capacity between disjoint link, node in the network
|
|
is achieved while guaranteeing recovery from a single failure.
|
|
In the packet 1+1 architecture type, the traffic is transmitted
|
|
simultaneously onto two possibly disjoint routed LSPs to the
|
|
sink of the protection domain. Each pair of duplicate
|
|
transmitted packets is assigned the same identifier (sequence
|
|
number) but distinct from the other pairs of duplicate packets.
|
|
At the sink of the protection domain packet level selection
|
|
mechanism is employed to select one of the two possibly
|
|
received copies of each packet.
|
|
1: 1:1 protection switching,;
|
|
2: 1+1 protection switching;
|
|
3: shared mesh protection swiching;
|
|
4: packet 1+1 protection switching.
|
|
"
|
|
::= { hwMplsPsEntry 2 }
|
|
|
|
|
|
hwMplsPsWorkTunnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of work-tunnel."
|
|
::= { hwMplsPsEntry 3 }
|
|
|
|
|
|
hwMplsPsWorkTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Work-tunnel id(session-tunnel-id)."
|
|
::= { hwMplsPsEntry 4 }
|
|
|
|
|
|
hwMplsPsProtectTunnName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of protect-tunnel."
|
|
::= { hwMplsPsEntry 5 }
|
|
|
|
|
|
hwMplsPsProtectTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protect-tunnel id(session-tunnel-id)."
|
|
::= { hwMplsPsEntry 6 }
|
|
|
|
|
|
hwMplsPsRevertiveMode OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Revertive mode is a protection switching mode where revertive
|
|
action (switch back to the working LSP) is taken after the
|
|
working LSP is repaired.And switching does not occur in a
|
|
non-revertive mode.
|
|
1: revertive;
|
|
2: non-revertive;
|
|
"
|
|
::= { hwMplsPsEntry 7 }
|
|
|
|
|
|
hwMplsPsWTR OBJECT-TYPE
|
|
SYNTAX Integer32 (0..60)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wait to Restore timer is only applicable for the revertive mode
|
|
and applies to a working LSP,It prevents reversion back to
|
|
select the working LSP until the Wait to Restore timer has
|
|
expired.The default value is 12 minutes.step is 30s."
|
|
::= { hwMplsPsEntry 8 }
|
|
|
|
|
|
hwMplsPsHoldOff OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time between declaration of signal degrade or signal fail,
|
|
and the initialization of the protection switching algorithm.
|
|
step is 100ms.maximum is 10s."
|
|
::= { hwMplsPsEntry 9 }
|
|
|
|
|
|
hwMplsPsSwitchCondition OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current switch condition of the protection group.
|
|
1: clear,This command clears all of the externally
|
|
initiated switch commands listed below;
|
|
2: lockout of protection,Fix the selector position on the
|
|
working LSP,Prevents the selector from switching to the
|
|
protection LSP when it is selecting the working LSP.
|
|
Switches the selector from the protection to the working LSP
|
|
when it is selecting the protection LSP;
|
|
3: forced protection,Switches the selector from the working LSP
|
|
to the protection LSP (unless a higher priority switch
|
|
request (i.e., LoP) is in effect);
|
|
4: signal fail,for 1:1,Signal Fail (SF) is declared when the
|
|
source of the protection domain enters the Defect State by
|
|
receiving a BDI packet (from the return LSP or out of band).
|
|
5: manual switch for working-lsp,Switches the selector from the
|
|
working LSP to the protection LSP (unless an equal or higher
|
|
priority switch request (i.e., LoP, FS, SF or MS) is in
|
|
effect);
|
|
6: manual switch for protection-lsp,Switches the selector from
|
|
the protection LSP to the working LSP (unless an equal or
|
|
higher priority switch request (i.e., LoP, FS, SF or MS) is
|
|
in effect).
|
|
7: WTR-timer;
|
|
8: HoldOff-timer;
|
|
9: Others;
|
|
The pripority of the commands are:
|
|
clear > lockout of protection > force switch > manual switch for working
|
|
lsp = manual switch for protection lsp"
|
|
::= { hwMplsPsEntry 10 }
|
|
|
|
|
|
hwMplsPsWorkTunnelState OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of working tunnel state in one protection group,
|
|
whether it is in detection,
|
|
1: it is outof defect
|
|
2: it enters defect
|
|
"
|
|
::= { hwMplsPsEntry 11 }
|
|
|
|
|
|
hwMplsPsProtTunnelState OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of protection tunnel state in one protection group,
|
|
whether it is in detection,
|
|
1: it is outof defect
|
|
2: it enters defect"
|
|
::= { hwMplsPsEntry 12 }
|
|
|
|
|
|
hwMplsPsSwitchResult OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Which tunnel is used to transfer the data stream.
|
|
1: working-tunnel
|
|
2: protection-tunnel"
|
|
::= { hwMplsPsEntry 13 }
|
|
|
|
|
|
hwMplsPsCfgType OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of protection switch which is configured.
|
|
1: 1:1
|
|
2: 1+1
|
|
3: shared mesh
|
|
4: packet 1:1"
|
|
::= { hwMplsPsEntry 14 }
|
|
|
|
|
|
hwMplsPsCfgProtectTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protect-tunnel id(session-tunnel-id)."
|
|
::= { hwMplsPsEntry 15 }
|
|
|
|
|
|
hwMplsPsCfgRevertiveMode OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Revertive mode is a protection switching mode where revertive
|
|
action (switch back to the working LSP) is taken after the
|
|
working LSP is repaired.And switching does not occur in a
|
|
non-revertive mode.
|
|
1: revertive;
|
|
2: non-revertive;
|
|
|
|
"
|
|
::= { hwMplsPsEntry 16 }
|
|
|
|
|
|
hwMplsPsCfgWTR OBJECT-TYPE
|
|
SYNTAX Integer32 (0..60)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wait to Restore timer is only applicable for the revertive mode
|
|
and applies to a working LSP,It prevents reversion back to
|
|
select the working LSP until the Wait to Restore timer has
|
|
expired.The default value is 12 minutes.step is 30s."
|
|
::= { hwMplsPsEntry 17 }
|
|
|
|
|
|
hwMplsPsCfgHoldOff OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time between declaration of signal degrade or signal fail,
|
|
and the initialization of the protection switching algorithm.
|
|
step is 100ms.maximum is 10s."
|
|
::= { hwMplsPsEntry 18 }
|
|
|
|
|
|
hwMplsPsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and
|
|
delete a row in this table.
|
|
1: active
|
|
2: not in service
|
|
3: not ready
|
|
4: create and go
|
|
5: create and wait
|
|
6: destroy"
|
|
::= { hwMplsPsEntry 19 }
|
|
|
|
|
|
hwMplsPsLocalState OBJECT-TYPE
|
|
SYNTAX Integer32 (0..11)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current local state of the protection group.
|
|
0: Lockout of Protection (LO)
|
|
1: Signal Fail for Protection (SF-P)
|
|
2: Forced Switch (FS)
|
|
3: Signal Fail for Working (SF)
|
|
4: Signal Degrade for Protection(SD-P)
|
|
5: Signal Degrade for Working(SD)
|
|
6: Manual Switch (MS)
|
|
7: Wait-to-Restore (WTR)
|
|
8: Exercise (EXER)
|
|
9: Reverse Request(RR)
|
|
10: Do Not Revert (DNR)
|
|
11: No Request (NR)
|
|
The pripority of the commands are:
|
|
LO > SF-P > FS > SF > SD-P > SD > MS > WTR > EXER > RR > DNR > NR"
|
|
::= { hwMplsPsEntry 20 }
|
|
|
|
|
|
hwTunnPsTrapOpen OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1:enable;
|
|
2:disable;"
|
|
::= { hwMplsPsObjects 2 }
|
|
|
|
|
|
hwMplsVCPsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsVCPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwMplsPsObjects 3 }
|
|
|
|
hwMplsApsMismatchReason OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bridge(1),
|
|
channel(2),
|
|
switching(3),
|
|
operation(4),
|
|
traffic(5)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the alarm reason as below:
|
|
1. Bridge type mismatch, one side is 1:1 (Selector Bridge) protection,
|
|
the other side is 1+1 (Permanent Bridge) protection;
|
|
2. Channel type mismatch, one side has APS channel, the other side has no APS channel;
|
|
3. Switching type mismatch, one side is bidirectional switching,
|
|
the other side is unidirectional switching;
|
|
4. Operation type mismatch, one side is revertive operation,
|
|
the other side is non-revertive operation;
|
|
5. Traffic request mismatch, one side selects working connection,
|
|
the other side selects protection connection;
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { hwMplsPsObjects 4 }
|
|
|
|
|
|
hwMplsVCPsEntry OBJECT-TYPE
|
|
SYNTAX HwMplsVCPsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"this table for these commands
|
|
1.mpls te protection tunnel XXX
|
|
2. mpls te reverse-lsp { lsp-name XXXX | lsr-id X.X.X.X tunnel-id x }
|
|
3. mpls te reserved-for-binding "
|
|
INDEX { hwMplsVCPsIfIndex }
|
|
::= { hwMplsVCPsTable 1 }
|
|
|
|
|
|
HwMplsVCPsEntry ::=
|
|
SEQUENCE {
|
|
hwMplsVCPsIfIndex
|
|
InterfaceIndex,
|
|
hwMplsVCPsTNLBinding
|
|
TruthValue,
|
|
hwMplsTeReverseLspName
|
|
OCTET STRING,
|
|
hwMplsVcPsRowStatus
|
|
RowStatus,
|
|
hwMplsTeReverseLspLsrId
|
|
IpAddress,
|
|
hwMplsTeReverseLspTunnId
|
|
Integer32
|
|
}
|
|
|
|
hwMplsVCPsIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of working tunnel interface of Protection group "
|
|
::= { hwMplsVCPsEntry 1 }
|
|
|
|
|
|
hwMplsVCPsTNLBinding OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is used by command ' mpls te reserved-for-binding '"
|
|
::= { hwMplsVCPsEntry 2 }
|
|
|
|
|
|
hwMplsTeReverseLspName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is used for command ' mpls te reverse-lsp lspname'"
|
|
::= { hwMplsVCPsEntry 3 }
|
|
|
|
|
|
hwMplsVcPsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
1: active;
|
|
2: notInservice;
|
|
3: notReady;
|
|
4: CreateAndGo;
|
|
5: CreateAndWait;
|
|
6: destroy;"
|
|
::= { hwMplsVCPsEntry 4 }
|
|
|
|
|
|
hwMplsTeReverseLspLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'"
|
|
::= { hwMplsVCPsEntry 5 }
|
|
|
|
|
|
hwMplsTeReverseLspTunnId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'"
|
|
::= { hwMplsVCPsEntry 6 }
|
|
|
|
|
|
hwMplsPsNotifications OBJECT IDENTIFIER ::= { hwMplsOamPs 4 }
|
|
|
|
|
|
hwMplsPsSwitchPtoW NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId, hwMplsPsSwitchResult,
|
|
hwMplsPsWorkTunnelState, hwMplsPsProtTunnelState, hwMplsPsLocalState}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when switching from
|
|
protection-lsp to working-lsp occured."
|
|
::= { hwMplsPsNotifications 1 }
|
|
|
|
|
|
hwMplsPsSwitchWtoP NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId, hwMplsPsSwitchResult,
|
|
hwMplsPsWorkTunnelState, hwMplsPsProtTunnelState, hwMplsPsLocalState}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when switching from woking-lsp
|
|
to protection-lsp occured.
|
|
"
|
|
::= { hwMplsPsNotifications 2 }
|
|
|
|
hwMplsApsMismatch NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Trap information indicates fully incompatible provisioning and
|
|
working/protection configuration mismatch are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 3 }
|
|
|
|
|
|
hwMplsApsMismatchRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Trap information indicates fully incompatible provisioning and
|
|
working/protection configuration mismatch recovery are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 4 }
|
|
|
|
hwMplsApsLost NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group did not receive APS frames from protection tunnel.
|
|
"
|
|
::= { hwMplsPsNotifications 5 }
|
|
|
|
|
|
hwMplsApsLostRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group received APS frames from protection tunnel.
|
|
"
|
|
::= { hwMplsPsNotifications 6 }
|
|
|
|
hwMplsApsOutage NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group changed to defect state.
|
|
"
|
|
::= { hwMplsPsNotifications 7 }
|
|
|
|
|
|
hwMplsApsOutageRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group recovered from defect state.
|
|
"
|
|
::= { hwMplsPsNotifications 8 }
|
|
|
|
hwMplsApsDegraded NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Protection tunnel changed to defect state.
|
|
"
|
|
::= { hwMplsPsNotifications 9 }
|
|
|
|
hwMplsApsDegradedRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Protection tunnel recovered from defect state.
|
|
"
|
|
::= { hwMplsPsNotifications 10 }
|
|
|
|
hwMplsApsSwitchFail NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group changed to defect state.
|
|
"
|
|
::= { hwMplsPsNotifications 11 }
|
|
|
|
hwMplsApsSwitchFailRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsTunnelSignalProto, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Tunnel protection group recovered from defect state.
|
|
"
|
|
::= { hwMplsPsNotifications 12 }
|
|
|
|
hwMplsApsPathMisMatch NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Working or protection path mismatch are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 13 }
|
|
|
|
hwMplsApsPathMisMatchRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Working or protection path mismatch recovery are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 14 }
|
|
hwMplsApsTypeMisMatch NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Working or protection type mismatch are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 15 }
|
|
|
|
hwMplsApsTypeMisMatchRecovery NOTIFICATION-TYPE
|
|
OBJECTS { hwMplsPsWorkTunnName, hwMplsApsMismatchReason, hwMplsTunnelSignalledTunnelName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Working or protection type mismatch recovery are detected by APS frame.
|
|
"
|
|
::= { hwMplsPsNotifications 16 }
|
|
|
|
hwMplsOamPsConformance OBJECT IDENTIFIER ::= { hwMplsOamPs 100 }
|
|
|
|
|
|
hwMplsOamPsCompliances OBJECT IDENTIFIER ::= { hwMplsOamPsConformance 1 }
|
|
|
|
|
|
hwMplsOamPsGroupCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam ps."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hwMplsPsGroup, hwMplsVcPsGroup }
|
|
::= { hwMplsOamPsCompliances 1 }
|
|
|
|
|
|
hwMplsOamPsGroups OBJECT IDENTIFIER ::= { hwMplsOamPsConformance 2 }
|
|
|
|
|
|
hwMplsPsGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsPsType, hwMplsPsWorkTunnName, hwMplsPsWorkTunnId, hwMplsPsProtectTunnName, hwMplsPsProtectTunnId,
|
|
hwMplsPsRevertiveMode, hwMplsPsWTR, hwMplsPsHoldOff, hwMplsPsSwitchCondition, hwMplsPsWorkTunnelState,
|
|
hwMplsPsProtTunnelState, hwMplsPsSwitchResult, hwMplsPsCfgType, hwMplsPsCfgProtectTunnId, hwMplsPsCfgRevertiveMode,
|
|
hwMplsPsCfgWTR, hwMplsPsCfgHoldOff, hwMplsPsRowStatus, hwMplsPsLocalState, hwTunnPsTrapOpen, hwMplsVCPsIfIndex,
|
|
hwMplsPsIndex, hwMplsApsMismatchReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam ps management."
|
|
::= { hwMplsOamPsGroups 1 }
|
|
|
|
|
|
hwMplsVcPsGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsVCPsTNLBinding, hwMplsTeReverseLspName, hwMplsVcPsRowStatus, hwMplsTeReverseLspLsrId, hwMplsTeReverseLspTunnId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam ps reverse lsp."
|
|
::= { hwMplsOamPsGroups 2 }
|
|
|
|
|
|
hwMplsPsNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hwMplsPsSwitchPtoW, hwMplsPsSwitchWtoP, hwMplsApsMismatch, hwMplsApsMismatchRecovery, hwMplsApsLost, hwMplsApsLostRecovery, hwMplsApsOutage, hwMplsApsOutageRecovery, hwMplsApsDegraded, hwMplsApsDegradedRecovery, hwMplsApsSwitchFail, hwMplsApsSwitchFailRecovery }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwMplsOamPsGroups 3 }
|
|
|
|
hwMplsOamObjectConformance OBJECT IDENTIFIER ::= { hwMplsOamPs 101 }
|
|
|
|
hwMplsOamObjectGroups OBJECT IDENTIFIER ::= { hwMplsOamObjectConformance 1 }
|
|
|
|
hwMplsOamObjectGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsOamCapability, hwMplsOamView, hwMplsOamTrapOpen, hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrDetType, hwMplsOamIgrDetFreq, hwMplsOamIgrRevType,
|
|
hwMplsOamIgrRevLspName, hwMplsOamIgrRevLsrId, hwMplsOamIgrRevSessTunnId, hwMplsOamIgrEnable, hwMplsOamIgrValid,
|
|
hwMplsOamIgrAvaState, hwMplsOamIgrDefectType, hwMplsOamIgrCompatibilityMode, hwMplsOamIgrBDIFreq, hwMplsOamIgrRowStatus,
|
|
hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrDetType, hwMplsOamEgrDetFreq, hwMplsOamEgrRevType,
|
|
hwMplsOamEgrRevTunnName, hwMplsOamEgrAutoEn, hwMplsOamEgrAutoOvertime, hwMplsOamEgrBDIFreq, hwMplsOamEgrEnable,
|
|
hwMplsOamEgrValid, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType, hwMplsOamEgrRowStatus, hwMplsOamRlsnLspName, hwMplsOamRlsnLsrId,
|
|
hwMplsOamRlsnSessTunnId, hwMplsOamRlsnIfIndex, hwMplsOamRlsnIfName, hwMplsOamRlsnIsDown, hwMplsOamRlsnRowStatus,
|
|
hwMplsOamL2vcPeerIp, hwMplsOamL2vcVcType, hwMplsOamL2vcVcId, hwMplsOamL2vcRemotePeerIp, hwMplsOamL2vcRemoteVcType, hwMplsOamL2vcRemoteVcId,
|
|
hwMplsOamL2vcDetType, hwMplsOamL2vcDetFreq, hwMplsOamL2vcRevDetType, hwMplsOamL2vcRevDetFreq, hwMplsOamL2vcSendEnable, hwMplsOamL2vcReceiveEnable,
|
|
hwMplsOamL2vcAutoProlEn, hwMplsOamL2vcAutoOvertime, hwMplsOamL2vcValid, hwMplsOamL2vcAvaState, hwMplsOamL2vcDefectType, hwMplsOamL2vcBdiDefectType,
|
|
hwMplsOamL2vcCompatibilityMode, hwMplsOamL2vcBDIFreq, hwMplsOamL2vcRowStatus, hwMplsOamBidirectionalTunnelIndex, hwMplsOamBidirectionalTunnelTunnName, hwMplsOamBidirectionalTunnelDetType,
|
|
hwMplsOamBidirectionalTunnelDetFreq, hwMplsOamBidirectionalTunnelRevDetType, hwMplsOamBidirectionalTunnelRevDetFreq, hwMplsOamBidirectionalTunnelSendEnable, hwMplsOamBidirectionalTunnelReceiveEnable, hwMplsOamBidirectionalTunnelAutoProtocolEnable,
|
|
hwMplsOamBidirectionalTunnelAutoOvertime, hwMplsOamBidirectionalTunnelValid, hwMplsOamBidirectionalTunnelAvaState, hwMplsOamBidirectionalTunnelDefectType, hwMplsOamBidirectionalTunnelBdiDefectType, hwMplsOamBidirectionalTunnelCompatibilityMode,
|
|
hwMplsOamBidirectionalTunnelBDIFreq, hwMplsOamBidirectionalTunnelRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam all."
|
|
::= { hwMplsOamObjectGroups 1 }
|
|
|
|
hwMplsOamNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hwMplsOamIgrLSPOutDefect, hwMplsOamIgrLSPInDefect, hwMplsOamIgrLSPAva, hwMplsOamIgrLSPUnAva,
|
|
hwMplsOamEgrLSPOutDefect, hwMplsOamEgrLSPInDefect, hwMplsOamEgrLSPAva, hwMplsOamEgrLSPUnAva, hwMplsOamEgrFirstPkt, hwMplsOamEgrAutoProFDI,
|
|
hwMplsOamEgrRlsnDown, hwMplsOamL2vcOutDefect, hwMplsOamL2vcInDefect, hwMplsOamL2vcAva, hwMplsOamL2vcUnAva, hwMplsOamBidirectionalTunnelOutDefect,
|
|
hwMplsOamBidirectionalTunnelInDefect, hwMplsOamBidirectionalTunnelAva, hwMplsOamBidirectionalTunnelUnAva }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for mpls oam trap."
|
|
::= { hwMplsOamObjectGroups 2 }
|
|
|
|
hwMplsOamObjectCompliances OBJECT IDENTIFIER ::= { hwMplsOamObjectConformance 2 }
|
|
|
|
END
|
|
|
|
--
|
|
-- HUAWEI-MPLSOAM-MIB.mib
|
|
--
|