WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/huawei/HUAWEI-LOAD-BACKUP-MIB

4589 lines
199 KiB
Plaintext
Raw Permalink Blame History

-- =========================================================================
-- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: This mib provides loading, backup and patch-related functions.
-- Reference:
-- Version: V4.37
-- ========================================================================
HUAWEI-LOAD-BACKUP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwFrameIndex, hwSlotIndex
FROM HUAWEI-DEVICE-MIB
huaweiUtility
FROM HUAWEI-MIB
HWPCBType
FROM HUAWEI-TC-MIB
IpAddress, Integer32, Unsigned32, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, DisplayString, DateAndTime
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
hwVsName
FROM HUAWEI-VS-MGMT-MIB;
hwLoadBackup MODULE-IDENTITY
LAST-UPDATED "201904100000Z"
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"
This mib provides loading, backup and patch-related functions.
"
-- Revision history
REVISION "201904100000Z"
DESCRIPTION "V4.37,
Delete enum values coredump(203) in hwLoadContent.
Delete enum values cmlog(204) in hwLoadContent.
Add enum values coredump(203) in hwBackupContent.
Add enum values cmlog(204) in hwBackupContent."
REVISION "201812250000Z"
DESCRIPTION "V4.36,
Modify the size of hwLoadPassword from (0-16) to (0-40).
Modify the size of hwLoadUserName from (0-31) to (0-40)."
REVISION "201809190000Z"
DESCRIPTION "V4.35, modified description in hwFileServerInetAddressType."
REVISION "201808040000Z"
DESCRIPTION "V4.34,
Add the node hwFileServerInetAddressType of hwFileServerEntry for hwFileServerTable.
Add the node hwFileServerInetAddress of hwFileServerEntry for hwFileServerTable.
Add hwAutoBackupSuccessInetTrap in hwLoadBackupAlarmTrapsPrefix.
Add the node hwIoLoadSmartBoardType and hwIoLoadSmartRowStatus of HwIoLoadSmartEntry for hwIoLoadSmartTable.
Modify the value range(0-0xFFFFFFFE) of request ID in the description of hwLoadRequestId."
REVISION "201807110000Z"
DESCRIPTION "V4.33,
Add the node hwLoadVsID of hwLoadParaEntry for hwLoadParaTable.
Add the node hwBackupVsID of hwBackupParaEntry for hwBackupParaTable.
Add hwVsAutoBackupSuccessTrap and hwVsAutoBackupFailTrap in hwLoadBackupAlarmTrapsPrefix."
REVISION "201805290000Z"
DESCRIPTION "V4.32,
Add enum values emulog(251) in hwBackupContent."
REVISION "201802130000Z"
DESCRIPTION "V4.31,
Add serviceProcessSPUBProtectGroup(23),numberOfConfigedServicePort(24) in hwStatusID.
Add the description of serviceProcessSPUBProtectGroup(23),numberOfConfigedServicePort(24) in hwStatusDescription.
Add serviceProcessSPUBProtectGroup(23),numberOfConfigedServicePort(24) in hwStatusCollectMask."
REVISION "201801300000Z"
DESCRIPTION "V4.30,
Add the node hwSoftwarePacketActiveTrap of hwLoadBackupAlarmTrapsPrefix.
Add the node hwSoftwarePacketActiveTrap of hwLoadBackupAlarmTrapsPrefix."
REVISION "201712050000Z"
DESCRIPTION "V4.29, add enum values restorepointfile(250) in hwBackupContent for the restore point file.
add enum values restorepointfile(249) in hwLoadContent for the restore point file."
REVISION "201710240000Z"
DESCRIPTION "V4.28,
Add enum values emdi(15) in hwFileDataType."
REVISION "201707240000Z"
DESCRIPTION "V4.27,
Add enum values mixmodulefile(156) in hwLoadContent."
REVISION "201706300000Z"
DESCRIPTION "V4.26,
Add enum values appFirmware(27) in hwLoadContent."
REVISION "201703210000Z"
DESCRIPTION "V4.25,
Add enum values coredump(203) in hwBackupContent.
Add enum values cmlog(204) in hwBackupContent."
REVISION "201701100000Z"
DESCRIPTION "V4.24,
Add enum values ssdcrl(202) in hwLoadContent."
REVISION "201611220000Z"
DESCRIPTION "V4.23,
Add the node hwSaveFailTrap of hwLoadBackupAlarmTrapsPrefix.
Add the node hwSaveRecoverTrap of hwLoadBackupAlarmTrapsPrefix."
REVISION "201611180000Z"
DESCRIPTION "V4.22,
Modified the max access of hwMainboardID."
REVISION "201606140000Z"
DESCRIPTION "V4.21,
Add enum values scriptWithResult(201) in hwLoadContent.
Add enum values vsCreate(12), vsDelete(13), vsAddPhysicalResource(14) and vsDeletePhysicalResource(15) in hwOperationReqType."
REVISION "201604120000Z"
DESCRIPTION "V4.20,
Add the node hwAutoLoadBoardStartTrap of hwLoadBackupAlarmTrapsPrefix.
Add the node hwAutoLoadBoardCompleteTrap of hwLoadBackupAlarmTrapsPrefix.
Add the node hwAutoLoadBoardFailTrap of hwLoadBackupAlarmTrapsPrefix."
REVISION "201511240000Z"
DESCRIPTION "V4.19,
Modify the size of hwLoadFileName from (0-127) to (0-128)."
REVISION "201507040000Z"
DESCRIPTION "V4.18,
Add enum values rpscertfile(200) in hwLoadContent."
REVISION "201507010000Z"
DESCRIPTION "V4.17,
Add the node hwLoadOperFlag of hwLoadBackupMon."
REVISION "201506160000Z"
DESCRIPTION "V4.16,
Add enum values cmcperformance(14) in hwFileDataType.
Add several enums in the DESCRIPTION of hwBackupPeriodTable and hwBackupPeriodEntry.
Add several enums in the DESCRIPTION of hwBackupByHandTable and hwBackupByHandEntry."
REVISION "201505070000Z"
DESCRIPTION "V4.15,
Add enum values opticalfile(149) in hwLoadContent."
REVISION "201503130000Z"
DESCRIPTION "V4.14,
Add enum values rootCAfile(108) in hwLoadContent.
Add enum values mfgCAfile(109) in hwLoadContent."
REVISION "201503050000Z"
DESCRIPTION "V4.13,
Add enum values boardspectrum(150) in hwBackupContent."
REVISION "201502100000Z"
DESCRIPTION "V4.12,
Add enum values atiboardelabel(148) in hwLoadContent.
Add enum values atiboardelabel(141) in hwBackupContent."
REVISION "201501280000Z"
DESCRIPTION "V4.11,
Delete enum values voice(78) in hwLoadContent."
REVISION "201501060000Z"
DESCRIPTION "V4.10,
Add enum values sslcertfile(145) in hwLoadContent.
Add enum values sslkeyfile(146) in hwLoadContent.
Add enum values sslcrlfile(147) in hwLoadContent."
REVISION "201412160000Z"
DESCRIPTION "V4.09,
Add the node hwDataReplaceResult of hwLoadPara."
REVISION "201412060000Z"
DESCRIPTION "V4.08,
Add the node hwLoadInStandbyChannelTrap of hwLoadBackupAlmTrapsPrefix."
REVISION "201411060000Z"
DESCRIPTION "V4.07,
Add the node hwLoadEncryptAlgorithm hwLoadEncryptKey and hwLoadEncryptIV for hwLoadParaTable."
REVISION "201410250000Z"
DESCRIPTION "V4.06,
Add enum values rootfs(140) in hwLoadContent.
Add enum values uimage(141) in hwLoadContent.
Add enum values initrd(142) in hwLoadContent.
Add enum values rootfs(138) in hwBackupContent.
Add enum values uimage(139) in hwBackupContent.
Add enum values initrd(140) in hwBackupContent."
REVISION "201410230000Z"
DESCRIPTION "V4.05,
Add enum values frameelabel(144) in hwLoadContent.
Add enum values frameelabel(137) in hwBackupContent."
REVISION "201410060000Z"
DESCRIPTION "V4.04,
Add enum values boardinfo(9) in hwFileDataType.
Add several enums in the DESCRIPTION of hwBackupPeriodTable and hwBackupPeriodEntry.
Add several enums in the DESCRIPTION of hwBackupByHandTable and hwBackupByHandEntry."
REVISION "201409120000Z"
DESCRIPTION "V4.03,
Modify the description of hwBackupParaTable"
REVISION "201409030000Z"
DESCRIPTION "V4.02,
Modify the Revision history of V3.96 and V3.97"
REVISION "201408290000Z"
DESCRIPTION "V4.01,
Modify the size of hwFilePathName from (0-64) to (0-128)."
REVISION "201408150000Z"
DESCRIPTION "V4.00,
Add enum values xdsl-port-reset-info(136) in hwBackupContent."
REVISION "201407280000Z"
DESCRIPTION "V3.99,
Modified the range of hwNewPatchName."
REVISION "201406300000Z"
DESCRIPTION "V3.98,
1. removed all hyphens (-) from enumerated values of hwLoadContent.
2. removed all hyphens (-) from enumerated values of hwBackupContent"
REVISION "201405300000Z"
DESCRIPTION "V3.97,
Add enum values udm(13) in hwFileDataType.
Add several enums in the DESCRIPTION of hwBackupPeriodTable and hwBackupPeriodEntry.
Add several enums in the DESCRIPTION of hwBackupByHandTable and hwBackupByHandEntry."
REVISION "201405120000Z"
DESCRIPTION "V3.96,
Modified the description of hwBackupPeriodTable.
Modified the description of hwBackupPeriodEntry.
Modified the description of hwBackupByHandTable.
Modified the description of hwBackupByHandEntry."
REVISION "201404220000Z"
DESCRIPTION "V3.95, Modified the index of hwPatchNewEntry."
REVISION "201402250000Z"
DESCRIPTION "V3.94,
Modified the description of hwBackupMode.
Modified the description of hwLoadMode.
Modified the description of hwFileServerMode."
REVISION "201312240000Z"
DESCRIPTION "V3.93,
Add enum values port(76) in hwBackupContent.
Add enum values vectoring(135) in hwBackupContent. "
REVISION "201312130000Z"
DESCRIPTION "V3.92, Add the node hwOperationFileDigest for hwOperationInfoTable."
REVISION "201311200000Z"
DESCRIPTION "V3.91, add enum values userfile(134) in hwBackupContent for the user common file."
REVISION "201311190000Z"
DESCRIPTION "V3.90,Add enum values ont-interoperability-file(134) in hwLoadContent."
REVISION "201311110000Z"
DESCRIPTION "V3.89,Modify access type of hwNewFileDataType."
REVISION "201309120000Z"
DESCRIPTION "V3.88,Delte port(76) in the description of hwBackupContent."
REVISION "201307250000Z"
DESCRIPTION "V3.87,
Modify the size of hwBackupFileName from (0-127) to (0-128).
Modify the size of hwBackupUserName from (0-31) to (0-40).
Modify the size of hwBackupPassword from (0-16) to (0-40)."
REVISION "201307160000Z"
DESCRIPTION "V3.86, Add enum values ibmsFile(133) in hwBackupContent."
REVISION "201306040000Z"
DESCRIPTION "V3.85, Add enum values crosstalk-coupling-matrix(131) in hwBackupContent.
Add enum values vdsl2-xlin(132) in hwBackupContent.
Add hwBackupPrivatePara for hwBackupParaEntry."
REVISION "201304230000Z"
DESCRIPTION "V3.84, Change the status of hwSDLoadResult from current to obsolete."
REVISION "201301150000Z"
DESCRIPTION "V3.83, Delte enum values port(76) in hwBackupContent."
REVISION "201212130000Z"
DESCRIPTION "V3.82, Add the status of Gpon protect group for the node hwStatusCollectMask.
Add the status of link aggregation for the node hwStatusCollectMask.
Add the status of ServiceProcessBoard protect group for the node hwStatusCollectMask."
REVISION "201212100000Z"
DESCRIPTION "V3.81, Add enum values powerRunData(123) in hwBackupContent."
REVISION "201210300000Z"
DESCRIPTION "V3.80, Add enum values deviceinfo(9) in hwFileDataType."
REVISION "201210220000Z"
DESCRIPTION "V3.79, Add boardversion status for the node hwStatusCollectMask."
REVISION "201209250000Z"
DESCRIPTION "V3.78, Add enum values deviceCapabilityFile(122) in hwBackupContent."
REVISION "201208270000Z"
DESCRIPTION "V3.77, Add enum values cabinetelabel(120) in hwLoadContent.
Add enum values cabinetelabel(120) in hwBackupContent.
Add enum values batteryelabel(121) in hwBackupContent."
REVISION "201208250000Z"
DESCRIPTION "V3.76,1. Modified the description of hwPatchNewTable.
2. Modified the description of hwPatchNewEntry.
3. Modified the description of hwNewPatchAdminStatus.
4. Modified the description of hwNewPatchRely.
5. Modified the description of hwNewPatchRequestID."
REVISION "201208140000Z"
DESCRIPTION "V3.75, Modified the description of hwOperationProgress.
Add unit to hwOperationProgress."
REVISION "201208070000Z"
DESCRIPTION "V3.74,1. Add enum values serviceboardloading(13) in hwOperationReqStatus. "
REVISION "201207230000Z"
DESCRIPTION "V3.73, Modified the illegal comment symbol for FT."
REVISION "201207050000Z"
DESCRIPTION "V3.72, Modified enum values ontfile(9) to ontfile(11) in hwFileDataType."
REVISION "201207040000Z"
DESCRIPTION "V3.71, Add enum values ontfile(9) in hwFileDataType."
REVISION "201206050000Z"
DESCRIPTION "V3.70, Add the node hwStatusCollectReady for hwStatusCollect."
REVISION "201202100000Z"
DESCRIPTION "V3.69,1. Modified the description of hwLoadRequestId, hwBackupRequestID, hwBackupPositionPara. "
REVISION "201201050000Z"
DESCRIPTION "V3.68, Add enum values device-cap-xml(84) in hwBackupContent for device capability information xml file."
REVISION "201112290000Z"
DESCRIPTION "V3.67, modified a descripition of autobackup.
Add enum values bulkstat(8) in hwFileDataType.
Values patchactive(8), patchdeactive(9), patchdelete(10) and patchrun(11) are added for hwOperationReqType."
REVISION "201111200000Z"
DESCRIPTION "V3.66, add enum values userfile(80) in hwLoadContent for the user common file.
Add enum values interruptedAutoUpgrade(7) in hwOperationReqType.
Add enum values ioupgrade(11) and systemreboot(12) in hwOperationReqStatus."
REVISION "201111090000Z"
DESCRIPTION "V3.65, Add potsvoltage status for the node hwStatusCollectMask."
REVISION "201110180000Z"
DESCRIPTION "V3.64, modified description in hwLoadBackupResult and hwOperationReqErrStatus.
And modified the description in hwLoadServerPort and hwBackupServerPort."
REVISION "201108220000Z"
DESCRIPTION "V3.63, modified enum and description in hwPatchOperation."
REVISION "201107190000Z"
DESCRIPTION "V3.62, Add the node hwStatusCollectResultSize for hwStatusCollect.
Add enum values hwStatusCollectInfo(83) in hwBackupContent for hm status information file.
Values h248mginterface(11), mgcpmginterface(12), tcu(13), uplinkporttraffic(14),
onustatus(15), xpontraffic(16) and mxusnmpinfo(17) are added for hwStatusCollectMask."
REVISION "201105020000Z"
DESCRIPTION "V3.61, delete enum values interception(80) from hwLoadContent.
Add enum values resetRecord(82) in hwBackupContent for backup board debug information."
REVISION "201101200000Z"
DESCRIPTION "V3.60, modified enum description interception(80) to lawful-interception(80) in hwLoadContent."
REVISION "201012290000Z"
DESCRIPTION "V3.59, added hwProgramAndDataInfoTable for hwLoadBackupMon."
REVISION "201012200000Z"
DESCRIPTION "V3.58, Add enum values interception(80) in hwLoadContent for the lawful interception.
Modified the description of hwLoadPositionPara and hwPatchResult."
REVISION "201012080000Z"
DESCRIPTION "V3.57, modified the node hwOntIndex name ,from hwOntIndex to hwUpdateOntIndex."
REVISION "201011220000Z"
DESCRIPTION "V3.56, Value ap (10) is added for hwStatusCollectMask."
REVISION "201011090000Z"
DESCRIPTION "V3.55, The description of this MIB is modified according to the tool."
REVISION "201009190000Z"
DESCRIPTION "V3.54, added hwLoadPacketSmart for hwLoadParaEntry.
Add eoc firmware type to hwLoadContent."
REVISION "201008300000Z"
DESCRIPTION "V3.53, added hwSaveResult for standard trap.
Add enum values trace(8) in hwNewFileDataType."
REVISION "201008250000Z"
DESCRIPTION "V3.52, modified the contact-info and the revision history. Modified the description of leaves.
Add enum values voice(78) in hwLoadContent for the syntax and semantics of simpletest."
REVISION "201008160000Z"
DESCRIPTION "V3.51, The system supports the definitions of a new standard trap node hwPatchNeedResetBoardTrap."
REVISION "201007190000Z"
DESCRIPTION "V3.50, 1. The description of the object is modified. The objects hwLoadAdminStatus, hwConfigChangedSequence,
hwServerIpAddrForTerminal, hwBackupGuageTrap, and all the objects in hwCfgOperTable and hwPatchStatTable are abandoned.
2. The object name is changed. For instance, the name of hwBackUpOperationStartTrap is changed to hwSaveStartTrap,
the name of hwBackUpOperationCompleteTrap is changed to hwSaveCompleteTrap,
the name of hwBackupFileLenth is changed to hwBackupFileLength,
the name of hwClodePatchInconsistentTrap is changed to hwColdPatchInconsistentTrap,
the name of hwPatActiveTrap is changed to hwPatchInActiveTrap,
the name of hwPatDeActiveTrap is changed to hwPatchInDeActiveTrap,
the name of hwPatRestorecoldTrap is changed to hwPatchRestoreTrap,
and the name of hwLoadBackupAlmTraps is changed to hwLoadBackupAlarmTraps.
3. The enum values of hwLoadBackObject are changed to the following enum values for DT requirements:
loadbackupobjectmasterboard(1),
loadbackupobjectmastersubboard(2),
loadbackupobjectslaveboard(3),
loadbackupobjectslavesubboard(4),
loadbackupobjectmasterslave(5),
loadbackupobjectserviceboard(6),
loadbackupobjectservicesubboard(7),
loadbackupobjectserviceport(8),
loadbackupobjectframeboard(9),
loadbackupobjectemmboard(10),
loadbackupobjectbackboard(11),
loadbackupobjectsystem(12)
4. Add objects hwNewFileDataType and hwAutoBackupResult for DT requirements.
5. Add object hwLoadExtServerInetAddressType in hwLoadParaTable to set IP type of load server.
Add object hwLoadExtServerIPAddress in hwLoadParaTable to set IP address of load server.
Add object hwBackupExtServerInetAddressType in hwBackupParaTable to set IP type of load server.
Add object hwBackupExtServerIPAddress in hwBackupParaTable to set IP address of load server.
6. Values frame-pnp(79),board-pnp(80),subboard-pnp(81) are added for hwBackupContent.
Add hwBackupResouce for hwBackupParaEntry to identify specified pnp data."
REVISION "201007090000Z"
DESCRIPTION "V3.49, Add voice type to hwBackupContent."
REVISION "201005170000Z"
DESCRIPTION "V3.48, Add enum (file:77) in hwLoadContent leaf node for the supporting general file type."
REVISION "201004020000Z"
DESCRIPTION "V3.47, The system supports the definitions of a new standard trap node and associated trapparameter nodes."
REVISION "201003030000Z"
DESCRIPTION "V3.46, DT requirements are implemented and the syntax and semantics of SIMPLETEST are changed."
REVISION "201001290000Z"
DESCRIPTION "V3.45, This MIB is modified according to DT requirements. Trap definitions of associated alarms are added."
REVISION "201001290000Z"
DESCRIPTION "V3.44, The system supports the definitions of standard trap nodes and associated trapparameter nodes."
REVISION "201001260000Z"
DESCRIPTION "V3.43, This MIB does not meet the requirements of SIMPLETEST.
Alarms and errors of MIB BROWSER are cleared.MIB description is added according to new requirements."
REVISION "200911230000Z"
DESCRIPTION "V3.42, Values syncstatus (7), esc (8), and lswport (9) are added for hwStatusCollectMask."
REVISION "200911170000Z"
DESCRIPTION "V3.41, MIB alarms and errors are cleared."
REVISION "200907080000Z"
DESCRIPTION "V3.40, 1. Add script type to hwLoadContent.
2. Add script type to hwBackupContent.
3. Add script type to hwUndoContent."
REVISION "200904150000Z"
DESCRIPTION "V3.37, Add the function of querying the result of loading
files by the host from the SD card when the SC card is used for project deployment."
REVISION "200904010000Z"
DESCRIPTION "V3.35, Add the function of upgrading the multicast function
of the MDU through the OLT (as an agent)."
REVISION "200902050000Z"
DESCRIPTION "V3.33, Add an object for cancellation of database loading and backup."
REVISION "200902030000Z"
DESCRIPTION "V3.32, Support the health diagnosis feature."
REVISION "200901040000Z"
DESCRIPTION "V3.31, Support the batch upgrade of ONTs through the OLT agent.
Modify MIB table hwLoadParaTable. Add leaves hwLoadOntType and hwLoadVersionFilter,
and MIB table hwAgentUpdateOntTable."
REVISION "200804180000Z"
DESCRIPTION "V3.29, Support the configuration for automatically loading
the file server information through the board software."
REVISION "200804110000Z"
DESCRIPTION "V3.27, Add enumeration for the loading and backup of the SIP digitmap file."
REVISION "200802130000Z"
DESCRIPTION "V3.26, Add enumeration of the electronical label(elabel) backup types."
REVISION "200801210000Z"
DESCRIPTION "V3.25, Add enumeration for the loading and backup of digitmap,
H.248 profile, and SIP profile."
REVISION "200801080000Z"
DESCRIPTION "V3.23, Add the Clone operation during the optimization of the NMS upgrade efficiency."
REVISION "200712170000Z"
DESCRIPTION "V3.21,Support the optimization of the efficency of SingTel's NMS upgrade."
REVISION "200705170000Z"
DESCRIPTION "V3.17, Support automatic in-service upgrade."
REVISION "200703010000Z"
DESCRIPTION "V3.12, Normalize MIB."
REVISION "200607310000Z"
DESCRIPTION "V3.08, 1. Support the automatic backup feature.
2. (SSMP) Support enhancement of the patch functions and support
the loading through the XML interface."
REVISION "200601040000Z"
DESCRIPTION "V3.06, Support the management of the RAD SHDSL terminal."
REVISION "200312280000Z"
DESCRIPTION "V3.02, Modify according to the requirements of the BWA project."
REVISION "200302280000Z"
DESCRIPTION "V2.01, Modify according to the MIB requirements of the Brazilian customer."
REVISION "200211290000Z"
DESCRIPTION "V2.00, Revise the MIB according to the latest fixed-line network
standard (backup and loading through the NMS)."
REVISION "200210180000Z"
DESCRIPTION "V1.00, Complete the draft."
::= { huaweiUtility 6 }
hwLoadBackupMon OBJECT IDENTIFIER ::= { hwLoadBackup 1 }
hwLoadParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLoadParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Load parameter table, used to load various files to the host
through the NMS. The indexes of this table are hwFrameIndex and hwSlotIndex of the board.
For example, to load files to the board in slot 3 of frame 0, the index is 0.3.
"
::= { hwLoadBackupMon 1 }
hwLoadParaEntry OBJECT-TYPE
SYNTAX HwLoadParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Load parameter table, used to load various files to the host
through the NMS. The indexes of this entry are hwFrameIndex and hwSlotIndex of the board.
For example, to load files to the board in slot 3 of frame 0, the index is 0.3.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwLoadParaTable 1 }
HwLoadParaEntry ::=
SEQUENCE {
hwLoadServerIpAddr
IpAddress,
hwLoadMode
INTEGER,
hwLoadFileName
OCTET STRING,
hwLoadContent
INTEGER,
hwLoadBoardType
HWPCBType,
hwLoadPositionPara
Integer32,
hwLoadProcess
Integer32,
hwLoadUserName
OCTET STRING,
hwLoadPassword
OCTET STRING,
hwLoadAdminStatus
RowStatus,
hwLoadOperStatus
INTEGER,
hwLoadRequestId
Integer32,
hwLoadServerPort
Unsigned32,
hwBatchLoadOptions
INTEGER,
hwLoadOntType
OCTET STRING,
hwLoadVersionFilter
OCTET STRING,
hwLoadExtServerInetAddressType
InetAddressType,
hwLoadExtServerIPAddress
InetAddress,
hwLoadPacketSmart
INTEGER,
hwLoadEncryptAlgorithm
INTEGER,
hwLoadEncryptKey
OCTET STRING,
hwLoadEncryptIV
OCTET STRING,
hwLoadVsID
Integer32
}
hwLoadServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The IP address of file server.
"
::= { hwLoadParaEntry 1 }
hwLoadMode OBJECT-TYPE
SYNTAX INTEGER
{
tftp(1),
modem(2),
ftp(3),
smbLoadAnyBoards(4),
sftp(5),
other(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Load protocol.
Options:
1.tftp(1) -indicates that the Trivial File Transfer Protocol (TFTP) is used to perform
the loading through the network port. Select tftp(1) when the transmission mode
of the server is configured to TFTP. When TFTP is used for the loading, you need
not enter the user name (hwLoadUserName) and password (hwLoadPassword).
2.modem(2) -indicates that the XMODEM protocol is used to perform the loading through
the serial port. When you use the HyperTerminal of the OS to perform serial
port configuration on the server, select modem(2). Loading through the serial port
does not require networking and maintenance through the command line interface
does not require NM software.
3.ftp(3) -indicates that the File Transfer Protocol (FTP) is used to perform loading
through the network port. When the transmission mode of the server is configured to FTP,
select ftp(3). When FTP is used for the loading, you need to enter the user name (hwLoadUserName)
and password (hwLoadPassword).
4.smbLoadAnyBoards(4)-smbLoadAnyBoards.
5.sftp(5) -indicates that the Secure File Transfer Protocol (SFTP) is used to perform the loading through
the network port. Select sftp(5) when the transmission mode of the server is configured to SFTP.
When SFTP is used for the loading, you need to enter the user name (hwLoadUserName)
and password (hwLoadPassword). The instructions and data are encrypted during transmission.
6.other(255)-other.
The SFTP transmission mode is recommended.
"
::= { hwLoadParaEntry 2 }
hwLoadFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The name of the file to be loaded.
"
::= { hwLoadParaEntry 3 }
hwLoadContent OBJECT-TYPE
SYNTAX INTEGER
{
noloadcontent(-1),
program(1), -- program file
database(2), -- database file
patch(3), -- patch file
shellMacro(4), -- shell macro file
resLocal(5), -- local resource file
resGeneral(6), -- general resource file
cpeDrive(7), -- cpe drive
programDatabase(8), -- database file
programBios(9), -- bios file
programApp(10), -- application program
logicFpga(11), -- fpga logic file
logicCpld(12), -- Cpld logic file
logicPci(13), -- pci logic file
logicAfc(14), -- afc logic file
programMicroCode(15), -- micro code file
programFirmware(16), -- application program of pinch board
programHelp(17), -- program help file
programDataFlow(18), -- flow file of card management point
programBootFile(19), -- Boot program file of board
logciPa(20), -- Boot program file of board start
webExp(21), -- web exp file
webNev(22), -- web nev file
webHelp(23), -- web help file
programBsp(24), -- bsp program file
verBinFile(25), -- packet file
configurationFile(26), -- configuration file
appFirmware(27), --firmware
configurationIni(40), -- configuration file of ini formatini
configurationEfs(41), -- configuration file with the header of efs
configurationCli(42), -- configuration file of command line format
programCurrent(45), -- the program being run
programOther(46), -- the program that has not been run presently
license(49), -- license file
programchipset(50), -- AC5 chipset load
programExtendedBios(51), --extended bios file
programBaseBios(52), --base bios file
logicCpld2(53), -- cpld2 file
logicCpld3(54), -- cpld3 file
extendedBootRom(55), -- extended BootRom file
defaultCfg(56), -- default configuration file
boardManuVersion(57), -- board manufacture information
versionDescribe(58), -- version description file
announcement(59), --announcement file
voice(60), --voice file
boardtemplatefile(61), --board template file
frametemplatefile(62), --frame template file
r2signalingfile(63), -- r2 signaling file
declaration(65), --declaration file
digitmap(66), -- h248 Digitmap
elabel(67), -- elabel file
emuprogram(68), -- emu program file
emuelabel(69), -- emu elabel file
emuproofelabel(70), -- emu proof elabel file
backboardelabel(71), --frame back board elabel file
ioPacketfile(72), -- ioPacket file
h248Profile(73), -- h248 Profile
sipProfile(74), -- sip Profile
sipDigitmap(75), -- sip Digitmap
script(76), -- script configuration command file
file(77), -- general file
eocfirmware(79), -- eoc firmware file
userfile(80), -- user common file
rootCAfile(108), -- root CA certificate file
mfgCAfile(109), -- CA certificate file
cabinetelabel(120), -- cabinet elabel file
ontInteroperabilityfile(134), -- ONT interoperability file
rootfs(140), -- rootfs file
uimage(142), -- uimage file
initrd(143), -- initrd file
frameelabel(144), -- frame elabel file
sslcertfile(145), -- ssl certificate file
sslkeyfile(146), -- ssl key file
sslcrlfile(147), -- ssl CRL file
atiboardelabel(148), -- ATI board elabel file
opticalfile(149), -- Optical file
mixmodulefile(156), -- Mixmodule file
rpscertfile(200), -- RPS cert file
scriptWithResult(201), -- script configuration command file with result
ssdcrl(202), -- SSD CRL file
restorepointfile(249) -- restore point file
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Type of the loaded file.
Options:
1.noloadcontent(-1) -no file.
2.program(1) -program file.
3.database(2) -database file.
4.patch(3) -patch file.
5.shellMacro(4) -shell macro file.
6.resLocal(5) -local resource file.
7.resGeneral(6) -general resource file.
8.cpeDrive(7) -cpe drive.
9.programDatabase(8) -database file.
10.programBios(9) -bios file.
11.programApp(10) -application program.
12.logicFpga(11) -fpga logic file.
13.logicCpld(12) -Cpld logic file.
14.logicPci(13) -pci logic file.
15.logicAfc(14) -afc logic file.
16.programMicroCode(15) -micro code file.
17.programFirmware(16) -application program of pinch board.
18.programHelp(17) -program help file.
19.programDataFlow(18) -flow file of card management point.
20.programBootFile(19) -Boot program file of board.
21.logciPa(20) -Boot program file of board start.
22.webExp(21) -web exp file.
23.webNev(22) -web nev file.
24.webHelp(23) -web help file.
25.programBsp(24) -bsp program file.
26.verBinFile(25) -packet file.
27.configurationFile(26) -configuration file.
28.appFirmware(27) -firmware.
29.configurationIni(40) -configuration file of ini formatini.
30.configurationEfs(41) -configuration file with the header of efs.
31.configurationCli(42) -configuration file of command line format.
32.programCurrent(45) -the program being run.
33.programOther(46) -the program that has not been run presently.
34.license(49) -license file.
35.programchipset(50) -AC5 chipset load.
36.programExtendedBios(51) -extended bios file.
37.programBaseBios(52) -base bios file.
38.logicCpld2(53) -cpld2 file.
39.logicCpld3(54) -cpld3 file.
40.extendedBootRom(55) -extended BootRom file.
41.defaultCfg(56) -default configuration file.
42.boardManuVersion(57) -board manufacture information.
43.versionDescribe(58) -version description file.
44.announcement(59) -announcement file.
45.voice(60) -voice file.
46.boardtemplatefile(61) -board template file.
47.frametemplatefile(62) -frame template file.
48.r2signalingfile(63) -r2 signaling file.
49.declaration(65) -declaration file.
50.digitmap(66) -h248 Digitmap.
51.elabel(67) -elabel file.
52.emuprogram(68) -emu program file.
53.emuelabel(69) -emu elabel file.
54.emuproofelabel(70) -emu proof elabel file.
55.backboardelabel(71) -frame back board elabel file.
56.ioPacketfile(72) -io-packet file.
57.h248Profile(73) -h248 Profile.
58.sipProfile(74) -sip Profile.
59.sipDigitmap(75) -sip Digitmap.
60.script(76) -script configuration command file.
61.file(77) -general file.
62.eocfirmware(79) -eoc firmware file.
63.userfile(80) -user common file.
64.rootCAfile(108) -root CA certificate file.
65.mfgCAfile(109) -CA certificate file.
66.cabinetelabel(120) -cabinet elabel file.
67.ontInteroperabilityFile(134) -ONT interoperability file.
68.rootfs(140) -- rootfs file
69.uimage(142) -- uimage file
70.initrd(143) -- initrd file
71.frameelabel(144) -- frame elabel file
72.sslcertfile(145) -- ssl cert file
73.sslkeyfile(146) -- ssl key file
74.sslcrlfile(147) -- ssl crl file
75.atiboardelabel(148) -- ATI board elabel file
76.opticalfile(149) -- Optical file
77.mixmodulefile(156) -- Mixmodule file
78.rpscertfile(200) -- RPS cert file
79.scriptWithResult(201) -script configuration command file with result
80.ssdcrl(202) --SSD CRL file
81.restorepointfile(249) -- restore point file
"
::= { hwLoadParaEntry 4 }
hwLoadBoardType OBJECT-TYPE
SYNTAX HWPCBType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The type of the board to be loaded, which is defined in HUAWEI-TC-MIB.mib.
"
::= { hwLoadParaEntry 5 }
hwLoadPositionPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Auxiliary parameters for locating a board to be loaded.
When a file is loaded to an EMU, the value of this parameter is emuID.
When a file is loaded to a modem or an ONT, the value of this parameter is portID.
When a file is loaded to a daughter board, the value of this parameter is SubBoardID.
This parameter is not required for loading the file to other components.
-1 indicates that the parameter is meaningless.
"
::= { hwLoadParaEntry 6 }
hwLoadProcess OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Loading progress.
Range: 0-100.
"
::= { hwLoadParaEntry 7 }
hwLoadUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The name of load user, which is required in FTP mode and SFTP mode
but is not required in any other modes.
"
::= { hwLoadParaEntry 8 }
hwLoadPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The load user password, which is required in FTP mode and SFTP mode
but is not required in any other modes.
"
::= { hwLoadParaEntry 9 }
hwLoadAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"
Load Adminstatus. The object is not supported at present.
"
::= { hwLoadParaEntry 10 }
hwLoadOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
inition(1), -- initial state
loading(2), -- loading the file
flashing(3), -- saving the file to flash memory.
success(4), -- operation success (include loading success, writing flash success and so on)
failure(5) -- operation failure (include loading failure, writing flash failure and so on)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Operational Status. The object is not supported at present.
Options:
1.inition(1) -initial state.
2.loading(2) -loading the file.
3.flashing(3)-saving the file to flash memory.
4.success(4) -operation success (include loading success, writing flash success and so on).
5.failure(5) -operation failure (include loading failure, writing flash failure and so on).
"
::= { hwLoadParaEntry 11 }
hwLoadRequestId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The loading request ID, which identifies the loading request delivered by the NMS.
According to the ID, you can query hwOperationInfoTable to obtain the status and
results of each loading operation.
A request ID can be any integer in the range of 0-0xFFFFFFFE,
but the IDs of different loading requests are not duplicate.
This object cannot be set independently.
The hwLoadRequestId value of -1 indicates there is no loading operation.
"
::= { hwLoadParaEntry 12 }
hwLoadServerPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Monitoring port on the SFTP server.
Range: 0-65535
Default: 22
The invalid value is 65535.
"
DEFVAL { 22 }
::= { hwLoadParaEntry 13 }
hwBatchLoadOptions OBJECT-TYPE
SYNTAX INTEGER
{
noloadActiveAndStandby(-1),
loadActiveAndStandby(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Batch load options. This object is used to determine whether the slot number
of the active control board or the standby control board is selected.
Options:
1.noloadActiveAndStandby(-1) -indicates that the active and standby control boards
are not loaded at the same time.
2.loadActiveAndStandby(1) -indicates that the active and standby control boards
are loaded at the same time.
"
::= { hwLoadParaEntry 14 }
hwLoadOntType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
It indicates the ONT type.
This object is used to specify the type of the ONTs that are upgraded in batches through the OLT.
ONT type:
MA5610, MA5616, MA5620G, MA5620E, MA5626G, MA5626E, MA5651, MA5651G and MA5652.
"
::= { hwLoadParaEntry 15 }
hwLoadVersionFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..320))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
ONT version list.
It indicates version list of the ONTs that are upgraded in batched through the OLT.
This leaf is used to specify the ONT versions that need upgrade or the ONT versions
that need no upgrade.If this field is null, it indicates that no limitation about
version is set on the upgrade and all ONTs of the specified type should be upgraded.
If this field is not null, this leaf can be used to specifyeither the versions that
need upgrade or the versions that need no upgrade. The character '+' marks the versions
that need upgrade and the character '-' marks the versions that need no upgrade.
Note that the versions that need upgrade and the versions that need no upgrade are
exclusive in this leaf; therefore only one type of them can be specified at the same time.
When the versions that need upgrade are specified, only the specified versions are upgraded;
when the versions that need no upgrade are specified, all versionsother than the specified
ones are upgraded. To specify multiple versions at the same time, use the character '-' to
separate different versions.
"
::= { hwLoadParaEntry 16 }
hwLoadExtServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The type of address in hwLoadExtServerIPAddress.
"
::= { hwLoadParaEntry 17 }
hwLoadExtServerIPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The IPv4, IPv6 or DNS address of LOAD Server. Note that,
since this is an index to the table, the DNS name must be
short enough to fit into the maximum length of indices allowed
by the management protocol in use.
"
REFERENCE
"RFC 2748 section 2.3
"
::= { hwLoadParaEntry 18 }
hwLoadPacketSmart OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
smart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is used to identify the loading mode of the package file.
Options:
1.normal(1) -indicates that the entire package file is loaded into the system.
2.smart(2) -indicates that part of the package file is loaded into the system
according to the hardware configuration of the device.
Default { normal }
"
::= { hwLoadParaEntry 19 }
hwLoadEncryptAlgorithm OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
aes256cbc(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is used to identify the encrypt algorithm of the load file.
Options:
1.none(1) -indicates that the load file is not encrypt.
2.aes256cbc(2) -indicates that the script file encrypt algorithm is AES256-CBC.
"
::= { hwLoadParaEntry 20 }
hwLoadEncryptKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is used to identify the encrypt key.
"
::= { hwLoadParaEntry 21 }
hwLoadEncryptIV OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object is used to identify the initialization vector of the encrypt file.
"
::= { hwLoadParaEntry 22 }
hwLoadVsID OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The ID of the virtual system to be loaded.
Range: 0-8
"
::= { hwLoadParaEntry 23 }
hwBackupParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBackupParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Backup parameter table, used to back up various files of the host through the NMS.
This table is used to back up important system data. Therefore, configure a high
access permission for this table.
The indexes of this table are hwFrameIndex and hwSlotIndex of the board.
For example, to back up the files of the board in slot 3 of frame 0, the index is 0.3.
"
::= { hwLoadBackupMon 2 }
hwBackupParaEntry OBJECT-TYPE
SYNTAX HwBackupParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Backup parameter table, used to back up various files of the host through the NMS.
The indexes of this entry are hwFrameIndex and hwSlotIndex of the board.
For example, to back up the files of the board in slot 3 of frame 0, the index is 0.3.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwBackupParaTable 1 }
HwBackupParaEntry ::=
SEQUENCE
{
hwBackupServerIpAddr
IpAddress,
hwBackupMode
INTEGER,
hwBackupFileName
OCTET STRING,
hwBackupContent
INTEGER,
hwBackupProcess
Integer32,
hwBackupUserName
OCTET STRING,
hwBackupPassword
OCTET STRING,
hwBackupBoardType
HWPCBType,
hwBackupRequestID
Integer32,
hwBackupServerPort
Unsigned32,
hwBackupPositionPara
Integer32,
hwBackupExtServerInetAddressType
InetAddressType,
hwBackupExtServerIPAddress
InetAddress,
hwBackupResouce
OCTET STRING,
hwBackupPrivatePara
OCTET STRING,
hwBackupVsID
Integer32
}
hwBackupServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of file server.
"
::= { hwBackupParaEntry 1 }
hwBackupMode OBJECT-TYPE
SYNTAX INTEGER
{
tftp(1),
modem(2),
ftp(3),
sftp(5),
other(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Load protocol.
Options:
1.tftp(1) -indicates that the backup is performed by using TFTP through the
network port. Select tftp(1) when the transmission mode of the server is
configured to TFTP.When TFTP is used in the backup, you need not enter the
user name and password.
2.modem(2) -indicates that the backup is performed by using the Xmodem serial
port protocol through the serial port. When you use the HyperTerminal of
the OS to configure the serial port on the server, select modem(2).
Loading through the serial port does not require networking and maintenance
through the command line interface does not require NM software.
3.ftp(3) -indicates that the backup is performed by using FTP through the network
port. Select ftp when the transmission mode of the server is configured to FTP.
When FTP is used for file backup, you need to enter the user name and password.
4.sftp(5) -indicates that the backup is performed by using SFTP through the network port.
Select sftp(5) when the transmission mode of the server is configured to SFTP.
When SFTP is used for file backup, the instructions and data are encrypted
during transmission.
5.other(6) -other.
The SFTP transmission mode is recommended.
"
::= { hwBackupParaEntry 2 }
hwBackupFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The name of backup file.
"
::= { hwBackupParaEntry 3 }
hwBackupContent OBJECT-TYPE
SYNTAX INTEGER
{
nobackupcontent(-1),
database(1), -- database file
shellMacro(2), --shell macro file
log(3), -- log file
bill(4), -- bill file
alarm(5), -- alarm file
configurationFile(14), -- configuration file
program(15), -- program file
reslocal(16), --local resource file
resgeneral(17), --general resource file
patch(18), -- patch file
programDatabase(19), -- database file
programBios(20), -- bios file
programApp(21), -- application file
logicFpga(22), -- fpga logic file
logicCpld(23), -- Cpld logic file
logicPci(24), -- pci logic file
logicAfc(25), -- afc logic file
programMicroCode(26), -- micro-code file
programFireware(27), -- application program of pinch board
programDataFlow(28), -- flow file of card management point
programBootFile(29), -- boot program file of the board start
logciPa(30), -- fpga logic file of the pinch board
webExp(31), -- web exp file
webNev(32), -- web nev file
webHelp(33), -- web help file
programBsp(34), -- bsp program file
configurationIni(40), -- not supported
configurationEfs(41), -- not supported
configurationCli(42), -- not supported
programCurrent(45), -- not supported
programOther(46), -- not supported
bcdcInfo(47), -- bcdc description system in ini file
license(49), -- license file
programExtendedBios(51), --extended bios file
boardinfo(60), -- board information
extendedBootRom(61), -- extended BootRom file
defaultCfg(62), -- default configuration file
exception(63), -- exception file
versionDescribe(64), -- version description file
emuelabel(65), -- emu elabel file
emuproofelabel(66), -- emu proof elabel file
backboardelabel(67), --frame back board elabel file
nmscollectinfo(68), --nms collect information file
trapsyninfo(69), --trap synchronization information file
digitmap(70), -- h248 Digitmap
h248Profile(71), -- h248 profile
sipProfile(72), -- sip profile
elabel(73), -- elabel file
sipDigitmap(74), -- sip Digitmap
iop(75), -- iop file
port(76), -- Port status information
script(77), -- script command result
voice(78), -- voice file
framePnp(79), -- frame pnp
boardPnp(80), -- board pnp
subboardPnp(81), -- subboard pnp
resetRecord(82), -- debug information of board
hwStatusCollectInfo(83), -- hm status information file
deviceCapXml(84), -- device capability information xml file
cabinetelabel(120), -- cabinet elabel file
batteryelabel(121), -- battery elabel file
deviceCapabilityFile(122), -- device capability decoupling file
powerRunData(123), -- the running data
crosstalkCouplingMatrix(131), -- crosstalk coupling matrix file
vdsl2Xlin(132), -- vdsl2 xlin file
ibmsFile(133), --Installed Base Management System(IBMS) file type
userfile(134), -- user common file
vectoring(135), --Vectoring run info
xdslPortResetInfo(136), -- xdsl port auto reset info
frameelabel(137), -- frame elabel file
rootfs(138), -- rootfs file
uimage(139), -- uimage file
initrd(140), -- initrd file
atiboardelabel(141), -- ATI board elabel file
boardspectrum(150), -- Board Spectrum
coredump(203), -- linux coredump file
cmlog(204), -- cable modem logfile
restorepointfile(250), -- restore point file
emulog(251) -- SMU log file
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Type of the backup file.
Options:
1.nobackupcontent(-1) -no file.
2.database(1) -database file.
3.shellMacro(2) -shell macro file.
4.log(3) -log file.
5.bill(4) -bill file.
6.alarm(5) -alarm file.
7.configurationFile(14) -configuration file.
8.program(15) -program file.
9.reslocal(16) -local resource file.
10.resgeneral(17) -general resource file.
11.patch(18) -patch file.
12.programDatabase(19) -database file.
13.programBios(20) -bios file.
14.programApp(21) -application file.
15.logicFpga(22) -fpga logic file.
16.logicCpld(23) -Cpld logic file.
17.logicPci(24) -pci logic file.
18.logicAfc(25) -afc logic file.
19.programMicroCode(26) -micro-code file.
20.programFireware(27) -application program of pinch board.
21.programDataFlow(28) -flow file of card management point.
22.programBootFile(29) -boot program file of the board start.
23.logciPa(30) -fpga logic file of the pinch board.
24.webExp(31) -web exp file.
25.webNev(32) -web nev file.
26.webHelp(33) -web help file.
27.programBsp(34) -bsp program file.
28.configurationIni(40) -not supported.
29.configurationEfs(41) -not supported.
30.configurationCli(42) -not supported.
31.programCurrent(45) -not supported.
32.programOther(46) -not supported.
33.bcdcInfo(47) -bcdc description system in ini file.
34.license(49) -license file.
35.programExtendedBios(51) -extended bios file.
36.boardinfo(60) -board information.
37.extendedBootRom(61) -extended BootRom file.
38.defaultCfg(62) -default configuration file.
39.exception(63) -exception file.
40.versionDescribe(64) -version description file.
41.emuelabel(65) -emu elabel file.
42.emuproofelabel(66) -emu proof elabel file.
43.backboardelabel(67) -frame back board elabel file.
44.nmscollectinfo(68) -nms collect information file.
45.trapsyninfo(69) -trap synchronization information file.
46.digitmap(70) -h248 Digitmap.
47.h248Profile(71) -h248 profile.
48.sipProfile(72) -sip profile.
49.elabel(73) -elabel file.
50.sipDigitmap(74) -sip Digitmap.
51.iop(75) -iop file.
52.port(76) - Port status information
53.script(77) -script command result.
54.voice(78) -voice file.
55.framePnp(79) -frame pnp.
56.boardPnp(80) -board pnp.
57.subboardpnp(81) -subboard pnp.
58.resetRecord(82) -debug information of board.
59.hwStatusCollectInfo(83) -hm status information file.
60.deviceCapXml(84) -device capability information xml file.
61.cabinetelabel(120) -cabinet elabel file.
62.batteryelabel(121) -battery elabel file.
63.deviceCapabilityFile(122) -device capability decoupling file
64.powerRunData(123) -the running data
65.crosstalkCouplingMatrix(131) -crosstalk coupling matrix file
66.vdsl2Xlin(132) -vdsl2 xlin file
67.ibmsFile(133) -Installed Base Management System(IBMS) file type
68.userfile(134) - user common file
69.vectoring(135) -Vectoring run info
70.xdslPortResetInfo(136) -xdsl port auto reset info
71.frameelabel(137) -- frame elabel file
72.rootfs(138) -- rootfs file
73.uimage(139) -- uimage file
74.initrd(140) -- initrd file
75.atiboardelabel(141) -- ATI board elabel file
76.boardspectrum(150) -- Board Spectrum
77.coredump(203) -- linux coredump file
78.cmlog(204) -- cable modem logfile
79.restorepointfile(250) -- restore point file
80.emulog(251) -- SMU log file
"
::= { hwBackupParaEntry 4 }
hwBackupProcess OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Backup progress.
"
::= { hwBackupParaEntry 5 }
hwBackupUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The backup user name, which is required in FTP mode and SFTP mode
but is not required in TFTP mode.
"
::= { hwBackupParaEntry 6 }
hwBackupPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The backup user password, which is required in FTP mode and SFTP mode
but is not required in TFTP mode.
"
::= { hwBackupParaEntry 7 }
hwBackupBoardType OBJECT-TYPE
SYNTAX HWPCBType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The type of the board to be backed up, which is defined in HUAWEI-TC-MIB.mib.
"
::= { hwBackupParaEntry 8 }
hwBackupRequestID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The backup request ID, which identifies a backup request delivered by the NMS.
According to the ID, you can query hwOperationInfoTable to obtain
the status and results of each backup operation.
An backup request ID can be any integer in the range of 0-0xFFFFFFFF.
But, the IDs of different backup requests cannot duplicate.
This object cannot be set independently.
The hwBackupRequestID value of -1 indicates there is no backup operation.
"
::= { hwBackupParaEntry 9 }
hwBackupServerPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
SFTP server listen port.
Range: 0-65535
Default: 22
The invalid value is 65535.
"
DEFVAL { 22 }
::= { hwBackupParaEntry 10 }
hwBackupPositionPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Auxiliary parameters for locating a board to be backed up.
When a file is backed up to the EMU, the value of this parameter is emuID.
When a file is backed up to a modem or an ONT, the value of this parameter is portID.
When a file is backed up to a daughter board, the value of this parameter is SubBoardID.
This parameter is not required for backing up the file to other components.
The hwBackupPositionPara value of -1 indicates auxiliary parameters for locating is not exist.
"
::= { hwBackupParaEntry 11 }
hwBackupExtServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The type of address in hwBackupExtServerIPAddress.
"
::= { hwBackupParaEntry 12 }
hwBackupExtServerIPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The IPv4, IPv6 or DNS address of BACKUP Server. Note that,
since this is an index to the table, the DNS name must be
short enough to fit into the maximum length of indices allowed
by the management protocol in use.
"
REFERENCE
"
RFC 2748 section 2.3
"
::= { hwBackupParaEntry 13 }
hwBackupResouce OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The backup resource.
"
::= { hwBackupParaEntry 14 }
hwBackupPrivatePara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4096))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Proprietary parameter carried during file backup. The parameter is related to the contents of the backup file.
The backup file is Vdsl2 xlin. The proprietary parameter is the victim or disturb port list. The maximum length of the parameter is 4096 bytes.
1.The collection parameter that contains only a victim port list collects coefficient of crosstalk generated by all the disturb ports to a specified victim port.
Parameter description:
1.The parameter contains the parameter length and port list.
2.The parameter type of a port list is victim.
3.The information about a port list contains the MAC address, frame ID, slot ID, and port ID.
|Parameter length (4 bytes) |Parameter type (4 bytes) |Parameter length (4 bytes) |MAC address (6 bytes) |Reserved bytes |Frame (1 byte) |Slot (1 byte) |Port ID (1 byte) |...|
+----------------------------+--------------------------+-----------------------------+----------------------+-----------------+------------------+---------------+-----------------+...+
|<--Parameter length-------->|<-----------------------------------Victim port list------------------------------------------------------------------------------------------------> |
The MAC address is reserved and is filled with 0s in BLV and SLV scenarios. The omitted contents are repeat of |MAC address (6 bytes) |Reserved bytes |Frame (1 byte) |Slot (1 byte) |Port ID (1 byte) |.
2.The collection parameter that contains only a disturb port list collects coefficient of crosstalk generated by a specified disturb ports to all victim ports.
Parameter description:
1.The parameter contains the parameter length and port list.
2.The parameter type of a port list is disturb.
3.The information about a port list contains the MAC address, frame ID, slot ID, and port ID.
|Parameter length (4 bytes) |Parameter type (4 bytes) |Parameter length (4 bytes) |MAC address (6 bytes) |Reserved bytes |Frame (1 byte) |Slot (1 byte) |Port ID (1 byte) |...|
+-----------------------------+--------------------------+-----------------------------+----------------------+-----------------+------------------+---------------+-----------------+...+
|<--Parameter length-------->|<-----------------------------------disturb port list-----------------------------------------------------------------------------------------------> |
The MAC address is reserved and is filled with 0s in BLV and SLV scenarios. The omitted contents are repeat of |MAC address (6 bytes) |Reserved bytes |Frame (1 byte) |Slot (1 byte) |Port ID (1 byte) |.
3.The collection parameter that contains victim and disturb port lists collects coefficient of crosstalk generated by specified disturb ports to specified victim ports.
Parameter description:
1.The parameter contains the parameter length, victim port list, and disturb port list.
|Parameter length (4 bytes) |Parameter type (4 bytes) |Parameter length (4 length) |Port information |Parameter type (4 bytes) |Parameter length (4 bytes) |Port information |
+----------------------------+--------------------------+-----------------------------+-----------------+-------------------------+---------------------------+-----------------+
|<--Parameter length-------->|<-------------------------------------victim port list------------------->|<-----------------------disturb port list----------------------------> |
"
::= { hwBackupParaEntry 15 }
hwBackupVsID OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The ID of the virtual system to be backed up.
Range: 0-8
"
::= { hwBackupParaEntry 16 }
hwBackupAndRestoreConfig OBJECT IDENTIFIER ::= { hwLoadBackupMon 4 }
hwBackupAndRestore OBJECT-TYPE
SYNTAX INTEGER
{
copyMemToFlash(1),
copyFlashToMemory(2),
copyMemToHardDisk(3),
copyHardDiskToMem(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The running configuration in the system has been backed-up to flash or disk,
or restored. The object is not supported at present.
Options:
1. copyMemToFlash(1) -back up the configuration file for the host memory to the flash memory.
2. copyFlashToMemory(2) -back up the configuration file for the host memory to the disk.
3. copyMemToHardDisk(3) -copy the configuration file for the flash memory to the host memory for running.
4. copyHardDiskToMem(4) -copy the configuration file for the disk to the host memory for running.
"
::= { hwBackupAndRestoreConfig 1 }
hwConfigChangedSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
The sequence of system configuration changed.
The object is not supported at present.
"
::= { hwBackupAndRestoreConfig 2 }
-- Activating rollback operation table
-- 1.3.6.1.4.1.2011.6.6.1.5
hwCfgOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwCfgOperEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
New MIB node added by BWA production. Activating rollback operation table,
used to activate rollback operation.
The indexes of this table are hwFrameIndex and hwSlotIndex.
The object is not supported at present.
"
::= { hwLoadBackupMon 5 }
-- Activating rollback operation entry
-- 1.3.6.1.4.1.2011.6.6.1.5.1
hwCfgOperEntry OBJECT-TYPE
SYNTAX HwCfgOperEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
New MIB node added by BWA production. Activating rollback operation table,
used to activate rollback operation.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
The object is not supported at present.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwCfgOperTable 1 }
HwCfgOperEntry ::=
SEQUENCE
{
hwConfigAdminStatus
INTEGER,
hwConfigOperTimeLine
Integer32,
hwConfigOperProgress
Integer32,
hwConfigOperStatus
INTEGER
}
-- 0: activate default configuration 1: activate backed up software
-- 2: rollback begin (standby configuration will cover active configuration)
-- 3: rollback cancel (active configuration will cover standby configuration)
-- 1.3.6.1.4.1.2011.6.6.1.5.1.1
hwConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
activeDefaultCfg(0),
activeBackupSw(1),
beginRollback(2),
cancelRollback(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
configuration administration status.
Options:
1.activeDefaultCfg(0) -activate default configuration.
2.activeBackupSw(1) -activate the backed up software.
3.beginRollback(2) -rollback begin (standby configuration will cover active configuration).
4.cancelRollback(3) -rollback cancel (active configuration will cover standby configuration).
"
::= { hwCfgOperEntry 1 }
-- 1.3.6.1.4.1.2011.6.6.1.5.1.2
hwConfigOperTimeLine OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Time limit of canceling rollback operation, unit is day,
0 means canceling rollback immediately.
This node is just used for the rollback canceling operation.
"
::= { hwCfgOperEntry 2 }
-- Progress indication 0-100
-- 1.3.6.1.4.1.2011.6.6.1.5.1.3
hwConfigOperProgress OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Progress indication. The object is not supported at present.
"
::= { hwCfgOperEntry 3 }
-- 1 can be rollbacked
-- 2 can not be rollbacked
-- 1.3.6.1.4.1.2011.6.6.1.5.1.4
hwConfigOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
enableRollback(1),
disableRollback(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Flag of whether the file can be rollbacked.
Options:
1.enableRollback(1) -the file can be rollbacked.
2.disableRollback(2) -the file can not be rollbacked.
The object is not supported at present.
"
::= { hwCfgOperEntry 4 }
hwCpeLoadPara OBJECT IDENTIFIER ::= { hwLoadBackupMon 6 }
hwServerIpAddrForTerminal OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
This object indicates the IP address of TFTP server and it is used for
the loading to the terminal. The object is not supported at present.
"
::= { hwCpeLoadPara 1 }
--Operation Information Tabel
hwOperationInfo OBJECT IDENTIFIER ::= { hwLoadBackup 4 }
hwOperationInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOperationInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Operation information table. Through this table,
you can query the status and results of data saving, loading,
backup, upgrading without service interruption, patch rollback,
and cloning operations on the NMS. The index of this table is hwOperationReqID.
hwOperationReqID is an operation request ID.
"
::= { hwOperationInfo 1 }
hwOperationInfoEntry OBJECT-TYPE
SYNTAX HwOperationInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Operation information table. Through this table,
you can query the status and results of data saving, loading,
backup, upgrading without service interruption, patch rollback,
and cloning operations on the NMS. The index of this entry is hwOperationReqID.
hwOperationReqID is an operation request ID.
"
INDEX { hwOperationReqID }
::= { hwOperationInfoTable 1 }
HwOperationInfoEntry ::=
SEQUENCE
{
hwOperationReqID
Integer32,
hwOperationReqType
INTEGER,
hwOperationReqStatus
INTEGER,
hwOperationProgress
Integer32,
hwOperationReqErrStatus
Integer32,
hwOperationReqStartTime
DateAndTime,
hwOperationReqEndTime
DateAndTime,
hwOperationFileDigest
OCTET STRING
}
hwOperationReqID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The requestID of this operation. This object together with hwOperationReqType,
identifies different operations of different types.
"
::= { hwOperationInfoEntry 1 }
hwOperationReqType OBJECT-TYPE
SYNTAX INTEGER
{
dataSave(1),
load(2),
backup(3),
uninterruptedAutoUpgrade(4),
patchrollback(5),
clone(6),
interruptedAutoUpgrade(7),
patchactive(8),
patchdeactive(9),
patchdelete(10),
patchrun(11),
vsCreate(12),
vsDelete(13),
vsAddPhysicalResource(14),
vsDeletePhysicalResource(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Operation type.
Options:
1. dataSave(1) -indicates the data saving operation through the NMS.
2. load(2) -indicates the loading operation through the NMS.
3. backup(3) -indicates the backup operation through the NMS.
4. uninterruptedAutoUpgrade(4) -indicates automatic upgrade without service interruption.
5. patchrollback(5) -indicates patch rollback.
6. clone(6) -clone(6) is not in use at present.
7.interruptedAutoUpgrade(7) -indicates automatic upgrade with service interruption.
8.patchactive(8) -indicates patch active.
9.patchdeactive(9) -indicates patch deactive.
10.patchdelete(10) -indicates patch delete.
11.patchrun(11) -indicates patch run.
12.vsCreate(12) -indicates create virtual system.
13.vsDelete(13) -indicates delete virtual system.
14.vsAddPhysicalResource(14) -indicates add physical resource.
15.vsDeletePhysicalResource(15) -indicates delete physical resource.
"
::= { hwOperationInfoEntry 2 }
hwOperationReqStatus OBJECT-TYPE
SYNTAX INTEGER
{
initial(1),
datascanning(2),
transferring(3),
saving(4),
success(5),
fail(6),
uninterruptedAutoUpgradeResetStandby(7),
uninterruptedAutoUpgradeBatchHotBackupFirst(8),
uninterruptedAutoUpgradeSwitchOver(9),
uninterruptedAutoUpgradeBatchHotBackupSecond(10),
ioupgrade(11),
systemreboot(12),
serviceboardloading(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current status of an operation request.
Options:
1.initial(1) -indicates that the operation is in the preparation phase.
2.datascanning(2)-indicates that the operation is in the data collection phase.
3.transferring(3)-indicates that the operation is in the data transmission phase.
4.saving(4) -indicates that the operation is in the data saving phase.
5.success(5) -indicates that the operation is successful.
6.fail(6) -indicates that the operation fails.
7.uninterruptedAutoUpgradeResetStandby(7)
-indicates that automatic upgrade without service interruption is in the following state:
the standby control board is being started after reset.
8.uninterruptedAutoUpgradeBatchHotBackupFirst(8)
-indicates that automatic upgrade without service interruption is in the following state:
the standby control board is restarted and hot backup on the host is under way.
9.uninterruptedAutoUpgradeSwitchOver(9)
-indicates that automatic upgrade without service interruption is in the following state:
the active control board switches to the standby one and is being restarted.
10.uninterruptedAutoUpgradeBatchHotBackupSecond(10)
-indicates that automatic upgrade without service interruption is in the following state:
the current standby control board is already restarted and hot backup on the host is being performed.
11.ioupgrade(11) -indicates that automatic upgrade is in the following state:
the upgrade of the service board.
12.systemreboot(12)-indicates that automatic upgrade with service interruption is in the following state:
the system is rebooting.
13.serviceboardloading(13)--indicates that automatic upgrade is in the following state:
the service board is loading.
"
::= { hwOperationInfoEntry 3 }
hwOperationProgress OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The progress of the operation.
Range: 0-100.
"
::= { hwOperationInfoEntry 4 }
hwOperationReqErrStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The error code of this operation. The returned error code is an NMS error code.
The value 0 means 'No error';
The value 6561510 means 'Failed to transfer the file';
The value 6561553 means 'Username or password error';
The value 6561620 means 'The server is unreachable';
The value 6561623 means 'Failed to operate the remote file';
The value 6561625 means 'The SSH key is incorrect';
The value 6561626 means 'The path does not exist';
The value 6561627 means 'The file does not exist'.
"
::= { hwOperationInfoEntry 5 }
hwOperationReqStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time when the operation starts.
"
::= { hwOperationInfoEntry 6 }
hwOperationReqEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time when the operation ends.
"
::= { hwOperationInfoEntry 7 }
hwOperationFileDigest OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Digest value of the operating file, such as 0x13AC06A62E47FD51F95D2BA243CD0346,
0 means invalid value.
"
::= { hwOperationInfoEntry 8 }
hwPatch OBJECT IDENTIFIER ::= { hwLoadBackup 2 }
hwPatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPatchEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Do operations on single patch. The table is not supported at present.
The indexes of this table are hwFrameIndex, hwSlotIndex and hwPatchId.
"
::= { hwPatch 1 }
hwPatchEntry OBJECT-TYPE
SYNTAX HwPatchEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Do operations on single patch. The table is not supported at present.
The indexes of this entry are hwFrameIndex, hwSlotIndex and hwPatchId.
"
INDEX { hwFrameIndex, hwSlotIndex, hwPatchId }
::= { hwPatchTable 1 }
HwPatchEntry ::=
SEQUENCE
{
hwPatchId
Unsigned32,
hwPatchDescription
OCTET STRING,
hwPatchFuncNum
Integer32,
hwPatchTextLen
Integer32,
hwPatchDataLen
Integer32,
hwPatchType
INTEGER,
hwPatchAdminStatus
INTEGER,
hwPatchOperState
INTEGER
}
hwPatchId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Patch ID. The object is not supported at present.
"
::= { hwPatchEntry 1 }
hwPatchDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Patch Description.
"
::= { hwPatchEntry 2 }
hwPatchFuncNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Function number included in patch. The object is not supported at present.
"
::= { hwPatchEntry 3 }
hwPatchTextLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Patch text length.
"
::= { hwPatchEntry 4 }
hwPatchDataLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Patch data length. The object is not supported at present.
"
::= { hwPatchEntry 5 }
hwPatchType OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
temporary(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Patch type. The object is not supported at present.
Options:
1.common(1) -Patch type is common.
2.temporary(2) -Patch type is temporary.
"
::= { hwPatchEntry 6 }
hwPatchAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
deactive(2),
delete(3),
run(4),
withdraw(5)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"
Patch administrative status. The object is not supported at present.
Options:
1.active(1) -indicates patch administrative status is active.
2.deactive(2)-indicates patch administrative status is deactive.
3.delete(3) -indicates patch administrative status is delete.
4.run(4) -indicates patch administrative status is running.
5.withdraw(5)-indicates patch administrative status is withdraw.
"
::= { hwPatchEntry 7 }
hwPatchOperState OBJECT-TYPE
SYNTAX INTEGER
{
patchActive(1),
patchDeActive(2),
patchRunning(4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Patch operative state. The object is not supported at present.
Options:
1.patchActive(1) -Patch operative state is active.
2.patchDeActive(2)-Patch operative state is deactive.
3.patchRunning(4) -Patch operative state is running.
"
::= { hwPatchEntry 8 }
hwPatchStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPatchStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Information of patch statistics. The table is not supported at present.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwPatch 2 }
hwPatchStatEntry OBJECT-TYPE
SYNTAX HwPatchStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"
Information of patch statistics. The table is not supported at present.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwPatchStatTable 1 }
HwPatchStatEntry ::=
SEQUENCE
{
hwPatchStatNumMax
Integer32,
hwPatchStatTextMax
Integer32,
hwPatchStatDataMax
Integer32,
hwPatchStatTextUsed
Integer32,
hwPatchStatDataUsed
Integer32
}
hwPatchStatNumMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
The maximum number of patches can be supported in system.
The object is not supported at present.
"
::= { hwPatchStatEntry 1 }
hwPatchStatTextMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Size of patch code area. The object is not supported at present.
"
::= { hwPatchStatEntry 2 }
hwPatchStatDataMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Size of patch data area. The object is not supported at present.
"
::= { hwPatchStatEntry 3 }
hwPatchStatTextUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
Patch code area used. The object is not supported at present.
"
::= { hwPatchStatEntry 4 }
hwPatchStatDataUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Patch data area used. The object is not supported at present.
"
::= { hwPatchStatEntry 5 }
hwPatchNewTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPatchNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The patch information description table, which describes the information
about the patches in the system, including the running status of the patches.
At the same time, it allows you to activate, deactivate, delete, run,
and roll back a single patch.The indexes of this table are hwFrameIndex,
hwSlotIndex and hwNewPatchName.
"
::= { hwPatch 3 }
hwPatchNewEntry OBJECT-TYPE
SYNTAX HwPatchNewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The patch information description table, which describes the information
about the patches in the system, including the running status of the patches.
At the same time, it allows you to activate, deactivate, delete, run,
and roll back a single patch.The indexes of this entry are hwFrameIndex,
hwSlotIndex and hwNewPatchName.
"
INDEX { hwFrameIndex, hwSlotIndex, IMPLIED hwNewPatchName }
::= { hwPatchNewTable 1 }
HwPatchNewEntry ::=
SEQUENCE {
hwNewPatchName
OCTET STRING,
hwNewPatchDescription
OCTET STRING,
hwNewPatchType
INTEGER,
hwNewPatchAdminStatus
INTEGER,
hwNewPatchOperState
INTEGER,
hwNewPatchRely
OCTET STRING,
hwNewPatchRelied
OCTET STRING,
hwNewPatchRequestID
Integer32
}
hwNewPatchName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1|6|7))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The patch name and the table index. For example, the ASCII code of patch name
SPH001 after conversion is 83.80.72.48.48.49.
"
::= { hwPatchNewEntry 1 }
hwNewPatchDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description about the patch.
"
::= { hwPatchNewEntry 2 }
hwNewPatchType OBJECT-TYPE
SYNTAX INTEGER
{
hotcommon(1),
hottemporary(2),
coldcommon(3),
coldtemporary(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of the patch.
Options:
1.hotcommon(1) -indicates the released hot patch.
2.hottemporary(2) -indicates the temporary hot patch.
3.coldcommon(3) -indicates the released cold patch.
4.coldtemporary(4) -indicates the temporary cold patch.
"
::= { hwPatchNewEntry 3 }
hwNewPatchAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
nooperation(-1),
active(1),
deactive(2),
delete(3),
run(4),
rollback(6),
patchbatchconfirm(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Patch management operations.
Options:
1.nooperation(-1) -the state of start.
2.active(1) -activate a patch.
3.deactive(2) -deactivate a patch.
4.delete(3) -delete a patch.
5.run(4) -run a patch.
6.rollback(6) -roll back patch.
7.patchbatchconfirm(7)-activate patches in batch.
This function is no longer supported.
"
::= { hwPatchNewEntry 4 }
hwNewPatchOperState OBJECT-TYPE
SYNTAX INTEGER
{
patchActive(1),
patchDeActive(2),
patchRunning(4),
patchWaitActive(5),
patchWaitRunning(6),
patchWaitDelete(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The current state of the patch.
Options:
1.patchActive(1) -indicates that a patch is in the activated state.
2.patchDeActive(2) -indicates that a patch is in the deactivated state.
3.patchRunning(4) -indicates that a patch is in the running state.
4.patchWaitActive(5) -indicates that a patch is in the to be activated state.
5.patchWaitRunning(6) -indicates that a patch is in the state of waiting to be run.
6.patchWaitDelete(7) -indicates that a patch is in the state of waiting to be deleted.
"
::= { hwPatchNewEntry 5 }
hwNewPatchRely OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The name of the patch on which the current patch is dependent.
If the current patch has a dependent patch, the name of the dependent patch is displayed.
If the current patch has more than one dependent patch,
the names of the dependent patches are separated by '\'.
For example, if patch HP0003 is dependent on patches HP0001 and HP0002,
HP0001\HP0002 is displayed.
"
::= { hwPatchNewEntry 6 }
hwNewPatchRelied OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The name of the patch that is dependent on the current patch.
If a patch is dependent on the current patch, the name of the patch is displayed.
If multiple patches are dependent on the current patch,
the names of the patches are separated by '\'.
For example, if HP0003 and HP0004 are dependent on HP0002, HP0003\HP0004 is displayed.
"
::= { hwPatchNewEntry 7 }
hwNewPatchRequestID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the requestid of a patch asynchronous operation.
To perform such an operation, use this parameter.
Query object hwOperationInfoTable to obtain the operation result.
The value of requestid can be any integer in the range of 0-0xFFFFFFFF.
The requestid of an operation must be unique.
"
::= { hwPatchNewEntry 8 }
hwBackupDataToServer OBJECT IDENTIFIER ::= { hwLoadBackup 3 }
hwFileServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFileServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The parameter table for configuring a server for the device.
The indexes of this table are hwFileServerType, hwFileDataType and hwFileServerPriority.
"
::= { hwBackupDataToServer 1 }
hwFileServerEntry OBJECT-TYPE
SYNTAX HwFileServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The parameter table for configuring a server for the device.
The indexes of this entry are hwFileServerType, hwFileDataType and hwFileServerPriority.
"
INDEX { hwFileServerType, hwFileDataType, hwFileServerPriority }
::= { hwFileServerTable 1 }
HwFileServerEntry ::=
SEQUENCE {
hwFileServerType
INTEGER,
hwFileDataType
INTEGER,
hwFileServerPriority
INTEGER,
hwFileServerIpAddress
IpAddress,
hwFileServerMode
INTEGER,
hwFileUser
OCTET STRING,
hwFileUserPassword
OCTET STRING,
hwFilePathName
OCTET STRING,
hwFilePort
Unsigned32,
hwFileServerState
INTEGER,
hwFileServerRowStatus
RowStatus,
hwFileServerInetAddressType
InetAddressType,
hwFileServerInetAddress
InetAddress
}
hwFileServerType OBJECT-TYPE
SYNTAX INTEGER
{
autobackup(1),
autoload(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The server type.
Options:
1.autobackup(1) -indicates the server for automatic backup.
2.autoload(2) -indicates the server for automatic loading.
"
::= { hwFileServerEntry 1 }
hwFileDataType OBJECT-TYPE
SYNTAX INTEGER
{
database(1),
configurationfile(2),
alarm(3),
log(4),
lastword(5),
cdr(6),
program(7),
bulkstat(8),
boardinfo(9),
ontfile(11),
deviceinfo(12),
udm(13),
cmcperformance(14),
emdi(15)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The data type of a file.
Options:
1.database(1) -indicates that the backup file type is database file.
2.configurationfile(2) -indicates that the backup file type is configuration file.
3.alarm(3) -indicates that the backup file type is alarm file.
4.log(4) -indicates that the backup file type is log file.
5.lastword(5) -indicates that the backup file type is last word.
6.cdr(6) -indicates that the backup file type is multicast CDR file.
7.program(7) -indicates that the automatic loading file type is program.
8.bulkstat(8) -indicates that the backup file type is bulk statistic file.
9.boardinfo(9) -indicates that the backup file type is board info file.
10.ontfile(11) -indicates that the automatic loading file type is ont file.
11.deviceinfo(12) -indicates that the backup file type is expanded device info file.
12.udm(13) -indicates that the backup file type is user data management file.
13.cmcperformance(14) -indicates that the backup file type is cmc performance file.
14.emdi(15) -indicates that the backup file type is emdi file.
"
::= { hwFileServerEntry 2 }
hwFileServerPriority OBJECT-TYPE
SYNTAX INTEGER
{
primaryserver(1),
secondaryserver(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The type (active/standby) of the server.
The system can be configured with a maximum of two servers.
One as the active server and the other as the standby server.
When the active server fails or is unreachable, the standby server starts to function.
Options:
1. primaryserver(1) -indicates the active server.
2. secondaryserver(2) -indicates the standby server.
"
::= { hwFileServerEntry 3 }
hwFileServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The IP address of the server.
"
::= { hwFileServerEntry 4 }
hwFileServerMode OBJECT-TYPE
SYNTAX INTEGER
{
tftp(1),
ftp(2),
sftp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Protocal be used to transfer the file.
Options:
1.tftp(1)-indicates that TFTP is used to perform the backup through the network port.
When the transmission mode of the server is configured to TFTP, select tftp(1).
When TFTP is used for backup, you need not enter the user name (hwFileUser)
and the password (hwFileUserPassword).
2.ftp(2) -indicates that FTP is used to perform the backup through the network port.
When the transmission mode of the server is configured to FTP, select ftp(2).
When FTP is used for the backup, you need to enter the user name (hwFileUser)
and the password (hwFileUserPassword).
3.sftp(3)-indicates that SFTP is used to perform the backup through the network port.
Select sftp(3) when the transmission mode of the server is configured to SFTP.
When SFTP is used for backup, you need to enter the user name (hwFileUser)
and the password (hwFileUserPassword).
The instructions and data are encrypted during transmission.
The SFTP transmission mode is recommended.
"
::= { hwFileServerEntry 5 }
hwFileUser OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The backup user name, which is required in FTP mode and SFTP mode
but is not required in TFTP mode.
"
::= { hwFileServerEntry 6 }
hwFileUserPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The backup password, which is required in FTP mode and SFTP mode
but is not required in TFTP mode.
"
::= { hwFileServerEntry 7 }
hwFilePathName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The path to the backup file, which is not required in FTP mode, SFTP mode and TFTP mode.
"
::= { hwFileServerEntry 8 }
hwFilePort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Port number. It is only used by SFTP.
Default: 22
"
::= { hwFileServerEntry 9 }
hwFileServerState OBJECT-TYPE
SYNTAX INTEGER
{
currentserver(1),
notcurrentserver(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Describe whether the server is current server.
Options:
1.currentserver(1) -indicates that the server is the current server.
2.notcurrentserver(2) -indicates that the server is not the current server.
"
::= { hwFileServerEntry 10 }
hwFileServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Operation status of NMS station, the NMS station can be createAndGo(4) and deleted(6).
createAndGo(4) is supplied to create a new instance of a conceptual row.
destroy(6) is supplied to delete the instances associated with an existing conceptual row.
"
::= { hwFileServerEntry 11 }
hwFileServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The type of address in hwFileServerInetAddress.
Options:
1. ipv4(1) -indicates that the IP address type is ipv4.
2. ipv6(2) -indicates that the IP address type is ipv6.
"
::= { hwFileServerEntry 12 }
hwFileServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
The IPv4 or IPv6 address of the server.
"
REFERENCE
"RFC 2748 section 2.3
"
::= { hwFileServerEntry 13 }
hwBackupPeriodTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBackupPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The periodic backup table of the device data.The index of this table is hwFileDataType.
hwFileDataType is the file data type.
The index value is in the range of 1-9 and 11-15.
Options:
1.database(1) -indicates that the backup file type is database file.
2.configurationfile(2) -indicates that the backup file type is configuration file.
3.alarm(3) -indicates that the backup file type is alarm file.
4.log(4) -indicates that the backup file type is log file.
5.lastword(5) -indicates that the backup file type is last word.
6.cdr(6) -indicates that the backup file type is multicast CDR file.
7.program(7) -indicates that the automatic loading file type is program.
8.bulkstat(8) -indicates that the backup file type is bulk statistic file.
9.boardinfo(9) -indicates that the backup file type is board info file.
10.ontfile(11) -indicates that the automatic loading file type is ont file.
11.deviceinfo(12) -indicates that the backup file type is expanded device info file.
12.udm(13) -indicates that the backup file type is user data management file.
13.cmcperformance(14) -indicates that the backup file type is cmc performance file.
14.emdi(15) -indicates that the backup file type is emdi file.
"
::= { hwBackupDataToServer 2 }
hwBackupPeriodEntry OBJECT-TYPE
SYNTAX HwBackupPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The periodic backup table of the device data.The index of this entry is hwFileDataType.
hwFileDataType is the file data type.
The index value is in the range of 1-9 and 11-15.
Options:
1.database(1) -indicates that the backup file type is database file.
2.configurationfile(2) -indicates that the backup file type is configuration file.
3.alarm(3) -indicates that the backup file type is alarm file.
4.log(4) -indicates that the backup file type is log file.
5.lastword(5) -indicates that the backup file type is last word.
6.cdr(6) -indicates that the backup file type is multicast CDR file.
7.program(7) -indicates that the automatic loading file type is program.
8.bulkstat(8) -indicates that the backup file type is bulk statistic file.
9.boardinfo(9) -indicates that the backup file type is board info file.
10.ontfile(11) -indicates that the automatic loading file type is ont file.
11.deviceinfo(12) -indicates that the backup file type is expanded device info file.
12.udm(13) -indicates that the backup file type is user data management file.
13.cmcperformance(14) -indicates that the backup file type is cmc performance file.
14.emdi(15) -indicates that the backup file type is emdi file.
"
INDEX { hwFileDataType }
::= { hwBackupPeriodTable 1 }
HwBackupPeriodEntry ::=
SEQUENCE
{
hwBackupInterval
Integer32,
hwBackupTime
OCTET STRING,
hwBackupPeriodSwitch
INTEGER
}
hwBackupInterval OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "day"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The time interval of periodic backup.The interval is in the unit of day.
Range: 1-10
Default: 1
Unit: day
"
DEFVAL { 1 }
::= { hwBackupPeriodEntry 1 }
hwBackupTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (5))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The time point of the periodic backup. It is in the format of <hh:mm>.
Data's default backup time is 00:00,
configuration's default backup time is 01:00,
alarm's default backup time is 02:00,
log's default backup time is 03:00,
lastword's backup time is 04:00.
"
::= { hwBackupPeriodEntry 2 }
hwBackupPeriodSwitch OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Period backup switch.
Options:
1.on(1) -indicates that periodic backup is configured.
2.off(2) -indicates that periodic backup is not configured.
The default value is off(2).
"
DEFVAL { off }
::= { hwBackupPeriodEntry 3 }
hwBackupCondition OBJECT IDENTIFIER ::= { hwBackupDataToServer 3 }
hwBackupAlarmCondition OBJECT-TYPE
SYNTAX Integer32 (500..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Setting and querying the condition of backing up the alarm.
Range: 500-1000, indicating that the latest 500-1000 alarms of the current system can be backed up.
Default { 500 }
"
::= { hwBackupCondition 2 }
hwBackupLogCondition OBJECT-TYPE
SYNTAX Integer32 (100..250)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Setting and querying the condition of backing up the log.
Range: 100-250, indicating that the latest 100-250 logs of the current system can be backed up.
Default { 100 }
"
::= { hwBackupCondition 3 }
hwBackupLastwordCondition OBJECT-TYPE
SYNTAX Integer32 (200..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Setting and querying the condition of backing up the last word.
Range: 200-300, indicating that the latest 200-300 last words of the current system can be backed up.
Default { 200 }
"
::= { hwBackupCondition 4 }
hwBackupAlarmConditionSwitch OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Configuring the function of backing up the alarm.
Options:
1.on(1) -indicates that the alarm information is backed up according to the configured conditions.
2.off(2) -indicates that the alarm information is not backed up.
Default { off }
"
::= { hwBackupCondition 5 }
hwBackupLogConditionSwitch OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Configuring the function of backing up the log.
Options:
1.on(1) -indicates that the log information is backed up according to the configured conditions.
2.off(2) -indicates that the log information is not backed up.
Default { off }
"
::= { hwBackupCondition 6 }
hwBackupLastwordConditionSwitch OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Configuring the function of backing up the last word.
Options:
1.on(1) -indicates that the last word information is backed up according to the configured conditions.
2.off(2) -indicates that the last word information is not backed up.
Default { off }
"
::= { hwBackupCondition 7 }
hwBackupByHandTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBackupByHandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The manual data backup table. The index of this table is hwFileDataType.
hwFileDataType is the file data type. The index value is in the range of 1-9 and 11-15.
Options:
1.database(1) -indicates that the backup file type is database file.
2.configurationfile(2) -indicates that the backup file type is configuration file.
3.alarm(3) -indicates that the backup file type is alarm file.
4.log(4) -indicates that the backup file type is log file.
5.lastword(5) -indicates that the backup file type is last word.
6.cdr(6) -indicates that the backup file type is multicast CDR file.
7.program(7) -indicates that the automatic loading file type is program.
8.bulkstat(8) -indicates that the backup file type is bulk statistic file.
9.boardinfo(9) -indicates that the backup file type is board info file.
10.ontfile(11) -indicates that the automatic loading file type is ont file.
11.deviceinfo(12) -indicates that the backup file type is expanded device info file.
12.udm(13) -indicates that the backup file type is user data management file.
13.cmcperformance(14) -indicates that the backup file type is cmc performance file.
14.emdi(15) -indicates that the backup file type is emdi file.
"
::= { hwBackupDataToServer 4 }
hwBackupByHandEntry OBJECT-TYPE
SYNTAX HwBackupByHandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The manual data backup table. The index of this entry is hwFileDataType.
hwFileDataType is the file data type. The index value is in the range of 1-9 and 11-15.
Options:
1.database(1) -indicates that the backup file type is database file.
2.configurationfile(2) -indicates that the backup file type is configuration file.
3.alarm(3) -indicates that the backup file type is alarm file.
4.log(4) -indicates that the backup file type is log file.
5.lastword(5) -indicates that the backup file type is last word.
6.cdr(6) -indicates that the backup file type is multicast CDR file.
7.program(7) -indicates that the automatic loading file type is program.
8.bulkstat(8) -indicates that the backup file type is bulk statistic file.
9.boardinfo(9) -indicates that the backup file type is board info file.
10.ontfile(11) -indicates that the automatic loading file type is ont file.
11.deviceinfo(12) -indicates that the backup file type is expanded device info file.
12.udm(13) -indicates that the backup file type is user data management file.
13.cmcperformance(14) -indicates that the backup file type is cmc performance file.
14.emdi(15) -indicates that the backup file type is emdi file.
"
INDEX { hwFileDataType }
::= { hwBackupByHandTable 1 }
HwBackupByHandEntry ::=
SEQUENCE
{
hwBackupByHand
Integer32
}
hwBackupByHand OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Whether the backup is performed manually. The value of hwBackupByHand can only be set to 1.
When the value is set to 1, the data backup is triggered.
"
::= { hwBackupByHandEntry 1 }
-- 1.3.6.1.4.1.2011.6.6.1.7
hwAgentUpdateOntTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAgentUpdateOntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The optical network unit (ONT) batch upgrade management table.
When ONT batch upgrade through OLT agent is started on the NMS,
you can query the upgrade status, upgrade progress and error
code information about each ONT through this table.
The indexes of this table are hwOntFrameIndex, hwOntSlotIndex, hwOntPortIndex
and hwUpdateOntIndex of the ONT to be queried.Note that the index parameters
hwFrameIndex, hwSlotIndex, hwUpdateOntIndex,and hwPortIndex are optional
(To indicate that a parameter is optional, set the parameter to -1).
For example, to return the information about
all the ONTs connected to a specified port, set hwUpdateOntIndex to -1.
Then the information about all the ONTs of a port is returned.
To return the status of all the ONTs connected to all ports in a specified
slot of a frame, set both hwUpdateOntIndex and hwPortIndex to -1.
"
::= { hwLoadBackupMon 7 }
-- 1.3.6.1.4.1.2011.6.6.1.7.1
hwAgentUpdateOntEntry OBJECT-TYPE
SYNTAX HwAgentUpdateOntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The optical network unit (ONT) batch upgrade management table.
When ONT batch upgrade through OLT agent is started on the NMS,
you can query the upgrade status, upgrade progress and error
code information about each ONT through this table.
The indexes of this entry are hwOntFrameIndex, hwOntSlotIndex, hwOntPortIndex
and hwUpdateOntIndex of the ONT to be queried.Note that the index parameters
hwFrameIndex, hwSlotIndex, hwUpdateOntIndex,and hwPortIndex are optional
(To indicate that a parameter is optional, set the parameter to -1).
For example, to return the information about
all the ONTs connected to a specified port, set hwUpdateOntIndex to -1.
Then the information about all the ONTs of a port is returned.
To return the status of all the ONTs connected to all ports in a specified
slot of a frame, set both hwUpdateOntIndex and hwPortIndex to -1.
"
INDEX { hwOntFrameIndex, hwOntSlotIndex, hwOntPortIndex, hwUpdateOntIndex }
::= { hwAgentUpdateOntTable 1 }
HwAgentUpdateOntEntry ::=
SEQUENCE
{
hwOntFrameIndex
Integer32,
hwOntSlotIndex
Integer32,
hwOntPortIndex
Integer32,
hwUpdateOntIndex
Integer32,
hwOntUpdateState
DisplayString,
hwOntUpdateStateAndProgress
DisplayString
}
-- 1.3.6.1.4.1.2011.6.6.1.7.1.1
hwOntFrameIndex OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the frame in the device.
"
::= { hwAgentUpdateOntEntry 1 }
-- 1.3.6.1.4.1.2011.6.6.1.7.1.2
hwOntSlotIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the slot. The present slot index is determined by its
physical position in the board.
"
::= { hwAgentUpdateOntEntry 2 }
-- 1.3.6.1.4.1.2011.6.6.1.7.1.3
hwOntPortIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of the port.
"
::= { hwAgentUpdateOntEntry 3 }
-- 1.3.6.1.4.1.2011.6.6.1.7.1.4
hwUpdateOntIndex OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ONT ID.
"
::= { hwAgentUpdateOntEntry 4}
-- 1.3.6.1.4.1.2011.6.6.1.7.1.5
hwOntUpdateState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ONT update state.
data structure: ONT IP + ONT update state
----------------------------------------------------------------------
| ONT NUM | ONT IP | ONT update | ONT IP | ONT update | _ _ |
| (2B) | (4B) | state (1B) | (2B) | state(1B) | |
----------------------------------------------------------------------
state enum:
Loading is successful(1): The ont-packetfile is loaded to the ONT successfully.
Loading fails(2): Loading the ont-packetfile to the ONT failed.
Not upgrade(3): Upgrading the ONT does not start.
Loading(4): The ONT is being loaded with ont-packetfile.
Resetting(5): The ONT is being reset.
Upgrade fails(6): Upgrading the ONT fails.
Upgrade is successful(7): Upgrading the ONT is successful.
Because of the restrictions on the SNMP packet, the packet of up to 8 KB can be transmitted.
When the size of the packet to be reported exceeds 8 KB, the packet must be compressed.
The compress format of the packet is shown in the following figure.
-----------------------------------------------------------------------
| DATA-LENGTH | FLAG | TLV-NUM | TYPE | LEN | CRC | |
------------------------------------------------------------ |
| |
| |
| |
-----------------------------------------------------------------------
In the compressed packet:
DATA-LENGTH occupies four bytes to store the whole length of the file, including the header structure.
FLAG occupies two bytes to store the flag, which indicates the format of the file contents.
In this compressed packet, the flag indicates that the format of the file contents is compressed.
0xFEFE indicates compress and 0 indicates non-compress.
TLV-NUM indicates the number of TLVs that the file carries. In this compressed packet, TLV-NUM is 1,
indicating the CRC value of the compressed content. The following continuous bytes TYPE, LEN, and CRC
are data in the TLV format. Each of TYPE, LEN, and CRC occupies two bytes. In this compressed packet,
TYPE, LEN, and CRC record the CRC value of the compressed content. TYPE indicates the CRC type.
LEN indicates the number of bytes that the CRC occupies and the actual value is 2.
CRC stores the CRC value of the compressed content.
The actual returned content is compressed in the .zip format and stored in the final field of compressed
content.
"
::= { hwAgentUpdateOntEntry 5 }
-- 1.3.6.1.4.1.2011.6.6.1.7.1.6
hwOntUpdateStateAndProgress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ONT update state and load progress or load error num.
data structure: ONT IP + ONT update state + load progress/error num
---------------------------------------------------------------------------------------------------------
| ONT NUM | ONT IP | ONT update | load progress | ONT IP | ONT update | load progress | _ |
| (2B) | (4B) | state (1B) | /error num(4B | (4B) | state (1B) | /error num(4B | |
---------------------------------------------------------------------------------------------------------
load progress: percent, such as 20%
error num:
Loading of the OLT fails(1): Loading the ont-packetfile from the DC to the OLT failed.
Loading of the ONT fails(2): Loading the ont-packetfile from the OLT to the ONT failed.
ONT version does not match(3): After the ONT reset, the ONT version does not match the target ONT version.
If the ONT loading is successful, the loading progress is displayed as 100%.
If the ONT loading fails, the related error code is returned to indicate the reason.
"
::= { hwAgentUpdateOntEntry 6 }
-- 1.3.6.1.4.1.2011.6.6.1.8
hwUndoLoadBackup OBJECT IDENTIFIER ::= { hwLoadBackupMon 8 }
-- 1.3.6.1.4.1.2011.6.6.1.8.1
hwUndoOperType OBJECT-TYPE
SYNTAX INTEGER
{
nooperation(-1),
load(1),
backup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Cancel the operation of this type.
You can cancel the operations of loading and backing up the database through
this node when you incorrectly perform the operations.
Options:
1.nooperation(-1) -indicates that no operation is performed in the system currently.
2.load(1) -indicates that the loading operation is to be cancelled.
3.backup(2) -indicates that the backup operation is to be cancelled.
"
::= { hwUndoLoadBackup 1 }
-- 1.3.6.1.4.1.2011.6.6.1.8.2
hwUndoContent OBJECT-TYPE
SYNTAX INTEGER
{
nothing(-1),
data(1),
script(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Cancel the contents of the operation.
You can cancel the operations of loading and backing up the database
through this node when you incorrectly perform the operations.
Options:
1.nothing(-1) -indicates that no operation is performed in the system currently.
2.data(1) -indicates the operation on a database is to be cancelled.
Both the loading and backup of a database can be cancelled.
3.script(2) -indicates that the operation on a script is to be cancelled.
Only the loading of a script can be cancelled. The backup of a script cannot be cancelled.
"
::= { hwUndoLoadBackup 2 }
hwLoadOperFlag OBJECT-TYPE
SYNTAX INTEGER
{
enableLoad(1), -- enable load operator
disableLoad(2) -- disable load operator
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The object is used to identify whether the current system can load software.
Options:
1.enableLoad(1) -The current system can load software.
2.disableLoad(2) -The current system can not load software.
"
::= { hwLoadBackupMon 9 }
hwStatusCollect OBJECT IDENTIFIER ::= { hwLoadBackup 5 }
hwStatusInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwStatusInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains all collectable status information in the system.
The index of this table is hwStatusID. The index value is the status ID.
The table can only be queried. It cannot be configured.
"
::= { hwStatusCollect 1 }
hwStatusInfoEntry OBJECT-TYPE
SYNTAX HwStatusInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains all collectable status information in the system.
The index of this entry is hwStatusID. The index value is the status ID.
The table can only be queried. It cannot be configured.
"
INDEX { hwStatusID }
::= { hwStatusInfoTable 1 }
HwStatusInfoEntry ::=
SEQUENCE
{
hwStatusID
Integer32,
hwStatusDescription
OCTET STRING
}
hwStatusID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Status ID.Be consistent with the status parameters in the hwStatusCollectMask.
"
::= { hwStatusInfoEntry 1 }
hwStatusDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Status description.
-----------------------------------------------------
statusID | description
-----------------------------------------------------
cpu(0) | CPU usage of the control board
board(1) | running status of the board
frame(2) | running status of the shelf
temperature(3) | environmental temperature
power(4) | status of the power supply
fan(5) | status of the fan monitoring objects
upstreamport(6) | status of the uplink port
syncstatus(7) | sync status
esc(8) | Esc state
lswport(9) | Lsw ports status
ap(10) | status of the fault ap, return 100 logs at most
h248mginterface(11) | H248 MG interface status(OLT/MXU)
mgcpmginterface(12) | MGCP MG interface status(OLT/MXU)
tcu(13) | Tcu state
uplinkporttraffic(14) | traffic on the uplink port(OLT/MXU)
onustatus(15) | status of the ONU(OLT)
xpontraffic(16) | traffic on the xPON port(OLT)
mxusnmpinfo(17) | SNMP information about the MxU(OLT)
potsvoltage(18) | voltage status of the pots board
boardversion(19) | version of the board
gponProtectGroup(20) | status of Gpon protect group
linkAggregation(21) | status of link aggregation
serviceProcessBoardProtectGroup(22) | status of ServiceProcessBoard protect group
serviceProcessSPUBProtectGroup(23) | status of SPUB protect-group
numberOfConfigedServicePort(24) | number of configed service-port
"
::= { hwStatusInfoEntry 2 }
hwStatusCollectIndicate OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
stop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Start to collect status or stop collecting status.
Options:
1. start(1) -Collecting status starts.
2. stop(2) -Collecting status stops.
"
::= { hwStatusCollect 2 }
hwStatusCollectMask OBJECT-TYPE
SYNTAX BITS
{
cpu(0),
board(1),
frame(2),
temperature(3),
power(4),
fan(5),
upstreamport(6),
syncstatus(7),
esc(8),
lswport(9),
ap(10),
h248mginterface(11),
mgcpmginterface(12),
tcu(13),
uplinkporttraffic(14),
onustatus(15),
xpontraffic(16),
mxusnmpinfo(17),
potsvoltage(18),
boardversion(19),
gponProtectGroup(20),
linkAggregation(21),
serviceProcessBoardProtectGroup(22),
serviceProcessSPUBProtectGroup(23),
numberOfConfigedServicePort(24)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Collecting status mask.
Options:
1.cpu(0) -indicates that the CPU usage of the control board.
2.board(1) -indicates that the running status of the board.
3.frame(2) -indicates that the running status of the shelf.
4.temperature(3) -indicates that the environmental temperature.
5.power(4) -indicates that the status of the power supply.
6.fan(5) -indicates that the status of the fan monitoring objects.
7.upstreamport(6) -indicates the status of the uplink port.
8.syncstatus(7) -indicates the sync status.
9.esc(8) -indicates the Esc state.
10.lswport(9) -indicates the Lsw ports status.
11.ap(10) -indicates the the running status of the fault ap, return 100 logs at most.
12.h248mginterface(11) -indicates the H248 MG interface status.
13.mgcpmginterface(12) -indicates the MGCP MG interface status.
14.tcu(13) -indicates the Tcu state.
15.uplinkporttraffic(14) -indicates the traffic on the uplink port.
16.onustatus(15) -indicates the status of the ONU.
17.xpontraffic(16) -indicates the traffic on the xPON port.
18.mxusnmpinfo(17) -indicates the SNMP information about the MxU.
19.potsvoltage(18) -indicates the voltage status of the pots board.
20.boardversion(19) -indicates the version of the board.
21.gponProtectGroup(20) -indicates the status of Gpon protect group.
22.linkAggregation(21) -indicates the status of link aggregation.
23.serviceProcessBoardProtectGroup(22) -indicates the status of ServiceProcessBoard protect group.
24.serviceProcessSPUBProtectGroup(23) -indicates the status of ServiceProcessSPUB protect group.
25.numberOfConfigedServicePort(24) -indicates the number of configed service-port.
From left to right, each bit indicates a status parameter.
If the bit is set to 1, it indicates collecting the corresponding status parameter.
If the bit is set to 0, it indicates ignoring the corresponding status parameter.
The value of the status parameter is the serial number of the bit.
For example, if only status parameters cpu, board, and fan need to be collected,
the mask value is 11000100 (binary), that is, 0xC4.
"
::= { hwStatusCollect 3 }
hwStatusCollectType OBJECT-TYPE
SYNTAX INTEGER
{
fault(1),
all(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Collecting type.
Options:
1.fault(1) -Collecting system fault status information.
2.all(2) -Collecting all the system information.
When the collection start command is sent, the port is an optional object. If the port is not issued,
only the fault status information is collected by default.
Default { fault }
"
::= { hwStatusCollect 4 }
hwStatusCollectProgress OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The progress of collecting the device status information about the object can be queried
at the specified time.
If the health diagnosis has not started, the displayed collection progress is 0.
If the health diagnosis has started but is not yet complete, the displayed collection progress
is the current collection progress.
If the health diagnosis has stopped (including the stop after the diagnosis is complete,
the stop when an error occurs, and the stop after a collection stop command is issued),
the displayed collection progress is 100.
"
::= { hwStatusCollect 5 }
hwStatusCollectResult OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8192))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
After the collection of the status information about an object is complete, the collection result can be queried.
If the health diagnosis has not started, or the health diagnosis has started but is not yet complete,
the displayed collection result is a blank character string.
If the health diagnosis has stopped, the displayed collection result is the actual data in the latest collection.
That is, after a collection is complete, the collection data is retained until the next collection starts.
1. The result returned by hwStatusCollectResult is displayed in the following format:
----------------------------------------------------------------------
| DATA-LENGTH (4byte) | FLAG (2byte) | TLV_NUM(2byte) |
|---------------------------------------------------------------
| TYPE1(2byte) | LEN1(2byte) | VALUE1 | -->CRC
|---------------------------------------------------------------
| TYPE2(2byte) | LEN2(2byte) | VALUE2 | -->TIME_INFO
----------------------------------------------------------------------
| |
| the content of Collected status |
| |
----------------------------------------------------------------------
DATA-LENGTH: It is used to save the length of a file.
FLAG: It is used to save the flag of a file, which represents the format of the file content.
Currently, the file content uses the non-compressing format, corresponding to flag 0.
TLV_NUM: It indicates the number of TLVs following a file. Currently, the number is 2,
indicating two TLVs, namely the CRC value and the time information.
The CRC value is used to record the compressed collection result. Currently, the CRC value is 0,
an invalid value, because the collection result is not compressed.
The data is reserved (type value 0) for the future performance expansion.
The time information indicates the time when the collection is complete. It is standard time on
the device and is recorded in a character string.
The format is <YYYY-MM-DD HH:MM:SS GMT{+/-}HH:MM> and the type value is 1.
2. The content of the status information is as follows (taking the board running status
and the CPU usage status information as an example):
-----------------------------------------------------------------------------------------
|hwStatusID|hwStatusDescription|instance |result of diagnoses| state |
-----------------------------------------------------------------------------------------
| 0 | CPU occupancy |NULL | 0/1(ok/false) |0-100(%) |
------------------------------------------------------------------------------------------
| 1 | Board state |frame/slot | 0/1(ok/false) |0-4(0:null;1:autofind; |
| | | | |2:fail;3:config;4:active)|
------------------------------------------------------------------------------------------
In the preceding content, each status index indicates a fault diagnosis point, and instance
indicates the minimum unit of data collection for the fault diagnosis point.
Each instance represents a piece of record in the diagnosis result. When the diagnosis point
corresponds to only one instance, the displayed instance value is NULL.
The data indicates the actual collection data about the instance of a fault diagnosis point.
3. The format of the reported status information is as follows:
The diagnosis item index and the instance determine a record. Each record contains the following
information:
The diagnosis item index, instance, diagnosis result, and status data. The information in each
record is separated by ~ and two records are separated by +.
For example, when the CPU usage (no instance) reaches 98%, the format of the reported information
is 0~~1~98%. When board 0/2 is in the faulty state whereas board 0/3 is in the normal state,
the format of the reported information is 1~0/2~1~fail+1~0/3~0~active.
If a status information collection fails, the format of the reported information contains only
the status item index and the diagnosis result (1).
For example, when the collection of the board running information fails,
the format of the reported information is 1~~1~.
"
::= { hwStatusCollect 6 }
hwStatusCollectResultSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The size of the Collecting result, unit is byte.
"
::= { hwStatusCollect 7 }
hwStatusCollectReady OBJECT-TYPE
SYNTAX INTEGER
{
ready(1),
notReady(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Ready status for health diagnosis.
Options:
1.ready(1) -The device is ready and health diagnosis can start.
2.notReady(2) -The device is not ready and health diagnosis cannot start.
"
::= { hwStatusCollect 8 }
hwLoadPara OBJECT IDENTIFIER ::= { hwLoadBackup 6 }
hwSysMultiCastLoad OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Configuring the function of the MDU upgrade through OLT agent.
Options:
1.enabled(1) -indicates that the upgrade is enabled.
2.disabled(2) -indicates that the upgrade is disabled.
Default:disabled(2)
"
::= { hwLoadPara 1 }
hwSDLoadResult OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..5000))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"
The results of file loading from the SD card by the host during
the query of the SD card office deployment.
The host assembles the result of SD card loading to a string
and submits the string to the NMS for resolution.
The maximum length of a string is 5 KB.The format of loading
result is:filename-1|result-1/filename-2|result-2/filename-3|result-3.
For example, program.efs|0/cpld.efs|0/load-io.efs|6561502.
"
::= { hwLoadPara 2 }
hwDataReplaceResult OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
failure(2),
invalid(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of load database and start up.
Options:
1. Success(1) -device load database start up successfull.
2. Failure(2) -device load database start up failure.
3. Invalid(3) -invalid result.
Default { Invalid } "
::= { hwLoadPara 3 }
hwPatchTrapsVbOids OBJECT IDENTIFIER ::= { hwPatch 4 }
hwPatchResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The result of patch rollback.
0 indicates that patch rollback is successful.
Nonzero digits are error code indicating that patch rollback failed.
For the meaning of error code, see error code list.
"
::= { hwPatchTrapsVbOids 1 }
hwPatchOperation OBJECT-TYPE
SYNTAX INTEGER
{
patchnull(0),
patchload(1),
patchactive(2),
patchdeactive(3),
patchrun(4),
patchdelete(5),
patchrollback(6),
patchshow(7),
patchrestore(8),
patchbatchrun(9)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The operation of patching file.
Options:
1.patchnull(0) -patchnull.
2.patchload(1) -Load the Patch.
3.patchactive(2) -Active the Patch.
4.patchdeactive(3) -Deavtive the Patch.
5.patchrun(4) -Run the Patch.
6.patchdelete(5) -Delete the Patch.
7.patchrollback(6) -RollBack the Patch.
8.patchshow(7) -Query the Patch.
9.patchrestore(8) -Restore the Patch.
10.patchbatchrun(9)-Batch run the Patch.
"
::= { hwPatchTrapsVbOids 2}
hwPatchTraps OBJECT IDENTIFIER ::= { hwPatch 5 }
hwPatchCommonTraps OBJECT IDENTIFIER ::= { hwPatchTraps 1 }
hwPatchCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwPatchCommonTraps 0 }
hwPatRollBackOkTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwPatchOperation,
hwPatchResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the patch rollback is successful.
"
::= { hwPatchCommonTrapsPrefix 1 }
hwPatRollBackFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwPatchOperation,
hwPatchResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the patch rollback fails.
"
::= { hwPatchCommonTrapsPrefix 2 }
hwPatColdPatDiffTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the states of cold patches on the active and
standby control boards are inconsistent.
"
::= { hwPatchCommonTrapsPrefix 3 }
hwPatchInActiveTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when a patch stays in the activated state for 24 hours
for the first time. 24 hours later, if the patch is still in the activated state, this trap
message is reported every 6 hours.
"
::= { hwPatchCommonTrapsPrefix 4 }
hwPatchInDeActiveTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when a patch stays in the deactivated state for 24 hours
for the first time. 24 hours later, if the patch is still in the deactivated state, this trap
message is reported every 6 hours.
"
::= { hwPatchCommonTrapsPrefix 5}
hwPatchRestoreTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the standby control board is reset because the patch
statuses on the active and standby control boards are different.
"
::= { hwPatchCommonTrapsPrefix 6 }
hwPatchAlarmTraps OBJECT IDENTIFIER ::= { hwPatchTraps 2 }
hwPatchAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwPatchAlarmTraps 0 }
hwPatchInActiveStateTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when a patch stays in the activated state for 24 hours for
the first time. 24 hours later, if the patch is still in the activated state, this trap message
is reported every 6 hours.
"
::= { hwPatchAlarmTrapsPrefix 1 }
hwPatchInDeactiveStateTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when a patch stays in the deactivated state for 24 hours for the
first time. 24 hours later, if the patch is still in the deactivated state, this trap message is
reported every 6 hours.
"
::= { hwPatchAlarmTrapsPrefix 2 }
hwColdPatchInconsistentTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the states of cold patches on the active and
standby control boards are inconsistent.
"
::= { hwPatchAlarmTrapsPrefix 3 }
hwPatchNeedResetBoardTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
After the patch is activated or deleted, the operation takes effect in certain
cases only after board or system reset. In such cases, if the board or system
is not reset 24 hours after the patch is activated or deleted, this trap message
is sent. If the board or system has not reset all the time, this trap message
is sent once every 24 hours.
"
::= { hwPatchAlarmTrapsPrefix 4 }
--Trapsparama
hwLoadBackupTrapsVbOids OBJECT IDENTIFIER ::= { hwLoadBackup 7 }
hwLoadBackupResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The result of load/backup.
The value 0 means 'No error';
The value 6561510 means 'Failed to transfer the file';
The value 6561553 means 'Username or password error';
The value 6561620 means 'The server is unreachable';
The value 6561623 means 'Failed to operate the remote file';
The value 6561625 means 'The SSH key is incorrect';
The value 6561626 means 'The path does not exist';
The value 6561627 means 'The file does not exist'.
"
::= { hwLoadBackupTrapsVbOids 1 }
hwLoadBackupGuage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The gauge of load/backup.
"
::= { hwLoadBackupTrapsVbOids 2 }
hwRollResult OBJECT-TYPE
SYNTAX INTEGER
{
rollOk(1),
rollFailed(2),
rollError(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Result of the rollback operation.
Options:
1. rollOk(1) -The rollback is successful.
2. rollFailed(2) -The rollback fails.
3. rollError(3) -An abnormality occurs during rollback.
"
::= { hwLoadBackupTrapsVbOids 3}
hwLoadBackObject OBJECT-TYPE
SYNTAX INTEGER
{
loadbackupobjectmasterboard(1),
loadbackupobjectmastersubboard(2),
loadbackupobjectslaveboard(3),
loadbackupobjectslavesubboard(4),
loadbackupobjectmasterslave(5),
loadbackupobjectserviceboard(6),
loadbackupobjectservicesubboard(7),
loadbackupobjectserviceport(8),
loadbackupobjectframeboard(9),
loadbackupobjectemmboard(10),
loadbackupobjectbackboard(11),
loadbackupobjectsystem(12)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Load/backup object.
Options:
1.loadbackupobjectmasterboard(1) -Load the object of master board.
2.loadbackupobjectmastersubboard(2) -Load the object of master subboard.
3.loadbackupobjectslaveboard(3) -Load the object of slave board.
4.loadbackupobjectslavesubboard(4) -Load the object of slave subboard.
5.loadbackupobjectmasterslave(5) -Load the object of master slave.
6.loadbackupobjectserviceboard(6) -Load the object of service board.
7.loadbackupobjectservicesubboard(7) -Load the object of service subboard.
8.loadbackupobjectserviceport(8) -Load the object of service port.
9.loadbackupobjectframeboard(9) -Load the object of frame board.
10.loadbackupobjectemmboard(10) -Load the object of emm board.
11.loadbackupobjectbackboard(11) -Load the object of back board.
12.loadbackupobjectsystem(12) -Load the object of system.
"
::= { hwLoadBackupTrapsVbOids 4 }
hwBackupContentLocation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
Backup content location, main board or standby board.
"
::= { hwLoadBackupTrapsVbOids 5 }
hwBackupFileLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The length of backup file.
"
::= { hwLoadBackupTrapsVbOids 6 }
hwNewFileDataType OBJECT-TYPE
SYNTAX INTEGER
{
lastword(1),
cdr(2),
database(3),
configurationfile(4),
alarm(5),
log(6),
program(7),
trace(8)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The data type of a file.
Options:
1.lastword(1) -indicates that the backup file type is last word.
2.cdr(2) -indicates that the backup file type is multicast CDR file.
3.database(3) -indicates that the backup file type is database file.
4.configurationfile(4) -indicates that the backup file type is configuration file.
5.alarm(5) -indicates that the backup file type is alarm file.
6.log(6) -indicates that the backup file type is log file.
7.program(7) -indicates that the automatic loading file type is program.
8.trace(8) -indicates that the backup file type is running log file.
"
::= { hwLoadBackupTrapsVbOids 7 }
hwAutoBackupResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
AutoBackup result.
0. -indicates that the backup is successful.
1. -indicates that the backup fails.
2. -indicates that the server is not configured.
3. -indicates that the loading(backuping,rollbacking,duplicating,...)command being executed.
4. -indicates that the username or password is wrong.
5. -indicates that the file transmission error.
6. -indicates that the uploaded file is 0 in size.
7. -indicates that the type of data has been backed up.
8. -indicates that the loading (backup, rollback, duplication...) command is being run when the data is backed up automatically.
"
::= { hwLoadBackupTrapsVbOids 8 }
hwSaveResult OBJECT-TYPE
SYNTAX INTEGER
{
succeeded(0),
failed(1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
The result of save.
Options:
1. succeeded(0) -indicates that the operation is successful.
2. failed(1) -indicates that the operation fails.
"
::= { hwLoadBackupTrapsVbOids 9 }
hwLoadBackupTraps OBJECT IDENTIFIER ::= { hwLoadBackup 8 }
--Common traps
hwLoadBackupCommonTraps OBJECT IDENTIFIER ::= { hwLoadBackupTraps 1 }
hwLoadBackupCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwLoadBackupCommonTraps 0 }
hwNoNeedSaveTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"
There is no need to save the database.
After the database is saved, this trap message is reported when the database is saved again
while no change is made on the database.
"
::= { hwLoadBackupCommonTrapsPrefix 1 }
hwBackupGuageTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadBackupGuage
}
STATUS obsolete
DESCRIPTION
"
This trap message is reported when a backup operation starts and it tells us the guage of backup.
"
::= { hwLoadBackupCommonTrapsPrefix 2 }
hwNoRollBackStartTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"
This trap message is reported when duplicating files starts from the master area
to the slave area in the board.
"
::= { hwLoadBackupCommonTrapsPrefix 3 }
hwNoRollBackResultTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwRollResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the duplication of a file from the active area to the
standby area is complete.
"
::= { hwLoadBackupCommonTrapsPrefix 4 }
hwSaveStartTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the data saving starts.
"
::= { hwLoadBackupCommonTrapsPrefix 5 }
hwLoadTransferFileTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the file transfer during loading is complete.
"
::= { hwLoadBackupCommonTrapsPrefix 6 }
hwSaveCompleteTrap NOTIFICATION-TYPE
OBJECTS { hwSaveResult}
STATUS current
DESCRIPTION
"
This trap message is reported when the data saving is complete.
"
::= { hwLoadBackupCommonTrapsPrefix 7 }
--Alarm traps
hwLoadBackupAlarmTraps OBJECT IDENTIFIER ::= { hwLoadBackupTraps 2 }
hwLoadBackupAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwLoadBackupAlarmTraps 0 }
hwDuplicatingFileStartTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"
This trap message is reported when duplicating files starts from the master area
to the slave area in the board.
"
::= { hwLoadBackupAlarmTrapsPrefix 1 }
hwDuplicatingFileSuccessTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"
This trap message is reported when duplicating files succeeded from the master area
to the slave area in the board.
"
::= { hwLoadBackupAlarmTrapsPrefix 2 }
hwDuplicatingFileFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex
}
STATUS current
DESCRIPTION
"
This trap message is reported when duplicating files failed from the master area
to the slave area in the board.
"
::= { hwLoadBackupAlarmTrapsPrefix 3 }
hwLoadStartTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadPositionPara,
hwLoadContent,
hwLoadBackObject
}
STATUS current
DESCRIPTION
"
This trap message is reported when the loading operation starts.
"
::= { hwLoadBackupAlarmTrapsPrefix 4 }
hwLoadSuccessTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadPositionPara,
hwLoadContent,
hwLoadBackObject
}
STATUS current
DESCRIPTION
"
This trap message is reported when the loading is successful.
"
::= { hwLoadBackupAlarmTrapsPrefix 5 }
hwLoadFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadPositionPara,
hwLoadContent,
hwLoadBackObject,
hwLoadBackupResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the loading fails.
"
::= { hwLoadBackupAlarmTrapsPrefix 6 }
hwBackupStartTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwBackupPositionPara,
hwBackupContent,
hwLoadBackObject
}
STATUS current
DESCRIPTION
"
This trap message is reported when the backup starts.
"
::= { hwLoadBackupAlarmTrapsPrefix 7 }
hwBackupSuccessTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwBackupPositionPara,
hwBackupContent,
hwLoadBackObject
}
STATUS current
DESCRIPTION
"
This trap message is reported when the backup is successful.
"
::= { hwLoadBackupAlarmTrapsPrefix 8 }
hwBackupFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwBackupPositionPara,
hwBackupContent,
hwLoadBackObject,
hwLoadBackupResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the backup fails.
"
::= { hwLoadBackupAlarmTrapsPrefix 9 }
hwAutoBackupFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwNewFileDataType,
hwBackupContentLocation,
hwAutoBackupResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the automatic backup fails.
"
::= { hwLoadBackupAlarmTrapsPrefix 10 }
--1.3.6.1.4.1.2011.6.8.2.0.11
hwAutoLoadStartTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadPositionPara,
hwLoadContent,
hwLoadBackObject
}
STATUS current
DESCRIPTION
"
During the start of the board, if the board software version is different from the
board software version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade starts.
"
::= { hwLoadBackupAlarmTrapsPrefix 11 }
--1.3.6.1.4.1.2011.6.8.2.0.12
hwAutoLoadCompleteTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadPositionPara,
hwLoadContent,
hwLoadBackObject
}
STATUS current
DESCRIPTION
"
During the start of the board, if the board software version is different from the board software
version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade is complete.
"
::= { hwLoadBackupAlarmTrapsPrefix 12 }
--1.3.6.1.4.1.2011.6.8.2.0.13
hwAutoLoadFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadPositionPara,
hwLoadContent,
hwLoadBackObject,
hwLoadBackupResult
}
STATUS current
DESCRIPTION
"
During the start of the board, if the board software version is different from the board software version
configured in the system, the system upgrades the board program automatically. This trap message is reported
when the automatic upgrade fails.
"
::= { hwLoadBackupAlarmTrapsPrefix 13 }
--1.3.6.1.4.1.2011.6.8.2.0.14
hwAutoBackupSuccessTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwNewFileDataType,
hwBackupFileLength,
hwBackupServerIpAddr
}
STATUS current
DESCRIPTION
"
This trap is reported when a log or an alarm is automatically uploaded successfully.
"
::= { hwLoadBackupAlarmTrapsPrefix 14 }
--1.3.6.1.4.1.2011.6.8.2.0.15
hwLoadInStandbyChannelTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadPositionPara,
hwLoadContent,
hwLoadBackObject
}
STATUS current
DESCRIPTION
"
This trap is reported the main channel of loading is invalid, load in standby channel.
"
::= { hwLoadBackupAlarmTrapsPrefix 15 }
--1.3.6.1.4.1.2011.6.8.2.0.16
hwAutoLoadBoardStartTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadBoardType,
hwLoadContent
}
STATUS current
DESCRIPTION
"
During the start of the board, if the board software version is different from the
board software version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade starts.
"
::= { hwLoadBackupAlarmTrapsPrefix 16 }
--1.3.6.1.4.1.2011.6.8.2.0.17
hwAutoLoadBoardCompleteTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadBoardType,
hwLoadContent
}
STATUS current
DESCRIPTION
"
During the start of the board, if the board software version is different from the board software
version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade is complete.
"
::= { hwLoadBackupAlarmTrapsPrefix 17 }
--1.3.6.1.4.1.2011.6.8.2.0.18
hwAutoLoadBoardFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwLoadBoardType,
hwLoadContent
}
STATUS current
DESCRIPTION
"
During the start of the board, if the board software version is different from the board software version
configured in the system, the system upgrades the board program automatically. This trap message is reported
when the automatic upgrade fails.
"
::= { hwLoadBackupAlarmTrapsPrefix 18 }
hwSaveFailTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the auto data saving is failed.
"
::= { hwLoadBackupAlarmTrapsPrefix 19 }
hwSaveRecoverTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the data saving is successful.
"
::= { hwLoadBackupAlarmTrapsPrefix 20 }
--1.3.6.1.4.1.2011.6.8.2.0.21
hwSoftwarePacketDeactiveTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the device does not restart within 24 hours after the software package updates.
"
::= { hwLoadBackupAlarmTrapsPrefix 21 }
--1.3.6.1.4.1.2011.6.8.2.0.22
hwSoftwarePacketActiveTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
This trap message is reported when the device restarts.
"
::= { hwLoadBackupAlarmTrapsPrefix 22 }
--1.3.6.1.4.1.2011.6.8.2.0.23
hwVsAutoBackupSuccessTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwVsName,
hwNewFileDataType,
hwBackupFileLength,
hwBackupExtServerIPAddress
}
STATUS current
DESCRIPTION
"
This trap is reported when a log or an alarm is automatically uploaded successfully.
"
::= { hwLoadBackupAlarmTrapsPrefix 23 }
--1.3.6.1.4.1.2011.6.8.2.0.24
hwVsAutoBackupFailTrap NOTIFICATION-TYPE
OBJECTS
{
hwNewFileDataType,
hwVsName,
hwBackupContentLocation,
hwAutoBackupResult
}
STATUS current
DESCRIPTION
"
This trap message is reported when the automatic backup fails.
"
::= { hwLoadBackupAlarmTrapsPrefix 24 }
--1.3.6.1.4.1.2011.6.8.2.0.25
hwAutoBackupSuccessInetTrap NOTIFICATION-TYPE
OBJECTS
{
hwFrameIndex,
hwSlotIndex,
hwNewFileDataType,
hwBackupFileLength,
hwFileServerInetAddress
}
STATUS current
DESCRIPTION
"
This trap is reported when a log or an alarm is automatically uploaded successfully.
"
::= { hwLoadBackupAlarmTrapsPrefix 25 }
hwProgramAndDataInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwProgramAndDataInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Program and data information table. Through this table,
you can query the status and version of program and data in active board or standby board .
The index of this table is hwMainboardID.
hwMainboardID is an mainboard ID.
"
::= { hwLoadBackup 9 }
hwProgramAndDataInfoEntry OBJECT-TYPE
SYNTAX HwProgramAndDataInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Program and data information table. Through this table,
you can query the status and version of program and data in active board or standby board .
The index of this entry is hwMainboardID.
hwMainboardID is an mainboard ID.
"
INDEX { hwMainboardID }
::= { hwProgramAndDataInfoTable 1 }
HwProgramAndDataInfoEntry ::=
SEQUENCE
{
hwMainboardID
INTEGER,
hwProagramActiveArea
INTEGER,
hwDataActiveArea
INTEGER,
hwProagramAreaAVersion
OCTET STRING,
hwProagramAreaBVersion
OCTET STRING,
hwDataAreaAVersion
OCTET STRING,
hwDataAreaBVersion
OCTET STRING
}
hwMainboardID OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
standby(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Operation type.
Options:
1.active(1) -indicates the active board.
2.standby(2) -indicates the standby board.
"
::= { hwProgramAndDataInfoEntry 1 }
hwProagramActiveArea OBJECT-TYPE
SYNTAX INTEGER
{
areaA(1),
areaB(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current infomation of the board program running.
Options:
1.areaA(1) -indicates that the program is running on area A.
2.areaB(2) -indicates that the program is running on area B.
"
::= { hwProgramAndDataInfoEntry 2 }
hwDataActiveArea OBJECT-TYPE
SYNTAX INTEGER
{
areaA(1),
areaB(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current infomation of the board data running.
Options:
1.areaA(1) -indicates that the data is running on area A.
2.areaB(2) -indicates that the data is running on area B.
"
::= { hwProgramAndDataInfoEntry 3 }
hwProagramAreaAVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current version of the program area A.
"
::= { hwProgramAndDataInfoEntry 4 }
hwProagramAreaBVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current version of the program area B.
"
::= { hwProgramAndDataInfoEntry 5 }
hwDataAreaAVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current version of the data area A.
"
::= { hwProgramAndDataInfoEntry 6 }
hwDataAreaBVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Current version of the data area B.
"
::= { hwProgramAndDataInfoEntry 7 }
-- 1.3.6.1.4.1.2011.6.6.1.10
hwIoLoadSmartTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIoLoadSmartEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Through this table,
you can query and config the board, after the board is configured, the board software is
loaded when load smart whether the board is configed or not.
"
::= { hwLoadBackup 10 }
-- 1.3.6.1.4.1.2011.6.6.1.10.1
hwIoLoadSmartEntry OBJECT-TYPE
SYNTAX HwIoLoadSmartEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Through this table,
you can query and config the board, after the board is configured, the board software is
loaded when load smart whether the board is configed or not.
"
INDEX { hwIoLoadSmartBoardType }
::= { hwIoLoadSmartTable 1 }
HwIoLoadSmartEntry ::=
SEQUENCE
{
hwIoLoadSmartBoardType
HWPCBType,
hwIoLoadSmartRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.6.6.1.10.1.1
hwIoLoadSmartBoardType OBJECT-TYPE
SYNTAX HWPCBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
When adding a board by using the hwIoLoadSmartBoardType, the software of board is loaded regardless
whether the board is configed or not.
"
::= { hwIoLoadSmartEntry 1 }
-- 1.3.6.1.4.1.2011.6.6.1.10.1.2
hwIoLoadSmartRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Supported setting operations are createAndGo(4) and destroy(6).
Options:
1. CreateAndGo(4) - the software of board is loaded regardless whether the board is configed or not.
2. Destroy(6) - the software of board is loaded when the board is configed.
"
::= { hwIoLoadSmartEntry 2 }
END
View Git Blame Copy Permalink