1087 lines
38 KiB
Plaintext
1087 lines
38 KiB
Plaintext
-- =============================================================================
|
|
-- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
|
|
--
|
|
-- Description:
|
|
-- The file defines a MIB to provide MESH configuration information.
|
|
-- Reference:
|
|
-- Version: V1.3
|
|
-- History:
|
|
-- V1.0 2008-07-08 Initial version, created by ChangHuifeng
|
|
-- V1.1 2008-11-07 modified by liyugang
|
|
-- Add hpnicfDot11sMeshLinkStatisTable, hpnicfDot11sMeshNbrStatusTable
|
|
-- to hpnicfDot11sMeshStatusGroup
|
|
-- V1.2 2009-08-01 modified by Wang Shaojie
|
|
-- Add hpnicfDot11sMeshLinkIFName to hpnicfDot11sMeshLinkStatisTable.
|
|
-- V1.3 2013-09-14 modified by Zhang Siyu
|
|
-- Add hpnicfDot11sMeshLinkType to hpnicfDot11sMeshLinkStatusTable
|
|
-- =============================================================================
|
|
HPN-ICF-DOT11S-MESH-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TruthValue,
|
|
MacAddress,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Unsigned32,
|
|
Counter32
|
|
FROM SNMPv2-SMI
|
|
hpnicfDot11, HpnicfDot11RadioElementIndex, hpnicfDot11APElementIndex
|
|
FROM HPN-ICF-DOT11-REF-MIB;
|
|
|
|
hpnicfDot11sMesh MODULE-IDENTITY
|
|
LAST-UPDATED "200908011000Z" -- Nov 07, 2008 at 10:00 GMT
|
|
ORGANIZATION
|
|
""
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION
|
|
"The file defines a MIB to provide MESH configuration information.
|
|
|
|
GLOSSARY
|
|
|
|
IEEE 802.11
|
|
Standard to encourage interoperability among
|
|
wireless networking equipment.
|
|
|
|
Access point (AP)
|
|
Transmitter/receiver (transceiver) device
|
|
that commonly connects and transports data
|
|
between a wireless network and a wired network.
|
|
|
|
Access control (AC)
|
|
To control and manage multi-APs, it will bridge
|
|
wireless and wired network.
|
|
|
|
Fat AP
|
|
Applied in the home, SOHO and so on, and it could
|
|
work independently without help from AC.
|
|
|
|
Fit AP
|
|
Applied in the enterprise environment, it will work
|
|
under the control and management from AC.
|
|
|
|
BSS
|
|
IEEE 802.11 Basic Service Set (Radio Cell). The
|
|
BSS of an AP comprises of the stations directly
|
|
associating with the AP.
|
|
|
|
Radio
|
|
The chip set to receive and send wireless signal.
|
|
|
|
Mesh
|
|
A network consisting of two or more mesh points
|
|
which communicate with each other via mesh services.
|
|
|
|
Mesh Point (MP)
|
|
An IEEE 802.11 entity that contains an IEEE 802.11-conformant
|
|
medium access control (MAC) and physical layer (PHY) interface
|
|
to the wireless medium (WM) that supports mesh services.
|
|
|
|
Mesh Access Point (MAP)
|
|
A mesh point that is collocated with one or more access points.
|
|
|
|
Mesh Portal Point (MPP)
|
|
A mesh point that is collocated with one or more portals.
|
|
|
|
Mesh Link
|
|
A link between two MPs."
|
|
REVISION "200908011000Z" -- Aug 01, 2009 at 10:00 GMT
|
|
DESCRIPTION
|
|
"Add new nodes."
|
|
REVISION "200811071000Z" -- Nov 07, 2008 at 10:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes and a new table."
|
|
REVISION "200807081800Z" -- July 8, 2008 at 18:00 GMT
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { hpnicfDot11 11 }
|
|
|
|
-- *****************************************************************************
|
|
-- * Major sections
|
|
-- *****************************************************************************
|
|
|
|
hpnicfDot11sConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11sMesh 1 }
|
|
-- Dot11s Configuration Group has the following children:
|
|
-- hpnicfDot11sMeshGlobalPara ::= { hpnicfDot11sConfigGroup 1 }
|
|
-- hpnicfDot11sMeshPflTable ::= { hpnicfDot11sConfigGroup 2 }
|
|
-- hpnicfDot11sMpPlcyTable ::= { hpnicfDot11sConfigGroup 3 }
|
|
-- hpnicfDot11sMlspCfgTable ::= { hpnicfDot11sConfigGroup 4 }
|
|
-- hpnicfDot11sRadioCfgTable ::= { hpnicfDot11sConfigGroup 5 }
|
|
-- hpnicfDot11sAPCfgTable ::= { hpnicfDot11sConfigGroup 6 }
|
|
|
|
hpnicfDot11sWDSConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11sMesh 2 }
|
|
-- Dot11s WDS Configuration Group has the following children:
|
|
-- hpnicfDot11sWDSPeerMacTable ::= { hpnicfDot11sWDSConfigGroup 1 }
|
|
|
|
hpnicfDot11sMeshStatusGroup OBJECT IDENTIFIER ::= { hpnicfDot11sMesh 3 }
|
|
-- Dot11s Mesh Status Group has the following children:
|
|
-- hpnicfDot11sMeshLinkStatusTable ::= { hpnicfDot11sMeshStatusGroup 1 }
|
|
-- hpnicfDot11sMeshLinkStatisTable ::= { hpnicfDot11sMeshStatusGroup 2 }
|
|
-- hpnicfDot11sMeshNbrStatusTable ::= { hpnicfDot11sMeshStatusGroup 3 }
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sMeshGlobalPara Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sMeshGlobalPara OBJECT IDENTIFIER ::= { hpnicfDot11sConfigGroup 1 }
|
|
|
|
hpnicfDot11sMeshMkdID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the mesh key distributor identifier (MKD-ID).
|
|
If the MKD-ID is not configured, the value is '00:00:00:00:00:00'."
|
|
::= { hpnicfDot11sMeshGlobalPara 1 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sMeshGlobalPara Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sMeshPflTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sMeshPflTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sMeshPflEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure mesh profile.
|
|
A mesh profile is created and mapped to a MP so that
|
|
it can provide mesh services to other MPs which have the same
|
|
mesh ID.
|
|
When the mesh profile is enabled, all of the object in this table
|
|
can not be modified except hpnicfDot11sMeshPflEnable.
|
|
The mesh profile can not be deleted when it is bound with the radio."
|
|
::= { hpnicfDot11sConfigGroup 2 }
|
|
|
|
hpnicfDot11sMeshPflEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sMeshPflEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of a mesh profile."
|
|
INDEX
|
|
{
|
|
hpnicfDot11sMeshPflIndex
|
|
}
|
|
::= { hpnicfDot11sMeshPflTable 1 }
|
|
|
|
HpnicfDot11sMeshPflEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sMeshPflIndex Integer32,
|
|
hpnicfDot11sMeshPflMeshID OCTET STRING,
|
|
hpnicfDot11sMeshPflBindIntNum Integer32,
|
|
hpnicfDot11sMeshPflKeepAlive Integer32,
|
|
hpnicfDot11sMeshPflBackhaulRate Integer32,
|
|
hpnicfDot11sMeshMkdServEnable TruthValue,
|
|
hpnicfDot11sMeshPflEnable TruthValue,
|
|
hpnicfDot11sMeshPflRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11sMeshPflIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the index of the mesh profile."
|
|
::= { hpnicfDot11sMeshPflEntry 1 }
|
|
|
|
hpnicfDot11sMeshPflMeshID OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the mesh ID of the mesh profile.
|
|
The string length of this object is zero when the mesh ID is not
|
|
configured. If the mesh ID is not configured, hpnicfDot11sMeshPflEnable
|
|
can not be set to 'true'."
|
|
::= { hpnicfDot11sMeshPflEntry 2 }
|
|
|
|
hpnicfDot11sMeshPflBindIntNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the specified mesh interface number
|
|
binding to the mesh profile.
|
|
If the value is set to -1, the binding will be removed.
|
|
If the mesh interface is not specified, the value of
|
|
hpnicfDot11sMeshPflEnable can not be set to 'true'."
|
|
DEFVAL { -1 }
|
|
::= { hpnicfDot11sMeshPflEntry 3 }
|
|
|
|
hpnicfDot11sMeshPflKeepAlive OBJECT-TYPE
|
|
SYNTAX Integer32(1..1800)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the mesh link keep-alive interval."
|
|
::= { hpnicfDot11sMeshPflEntry 4 }
|
|
|
|
hpnicfDot11sMeshPflBackhaulRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the link backhaul rate."
|
|
::= { hpnicfDot11sMeshPflEntry 5 }
|
|
|
|
hpnicfDot11sMeshMkdServEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the mesh key distributor (MKD)
|
|
service for the mesh profile is enabled.
|
|
'true': The MKD service for the mesh profile is enabled.
|
|
'false': The MKD service for the mesh profile is disabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11sMeshPflEntry 6 }
|
|
|
|
hpnicfDot11sMeshPflEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the mesh profile is enabled.
|
|
'true': The mesh profile is enabled.
|
|
'false': The mesh profile is disabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11sMeshPflEntry 7 }
|
|
|
|
hpnicfDot11sMeshPflRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11sMeshPflEntry 8 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sMeshPflTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sMpPlcyTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sMpPlcyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sMpPlcyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure MP policy.
|
|
There is 'default_mp_plcy' on system by default and its index is 1.
|
|
The 'default_mp_plcy' can not be deleted or modified.
|
|
The MP policy can not be deleted when it is applied to a radio.
|
|
It can not be modified when it is applied to an enabled radio."
|
|
::= { hpnicfDot11sConfigGroup 3 }
|
|
|
|
hpnicfDot11sMpPlcyEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sMpPlcyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of a MP policy."
|
|
INDEX
|
|
{
|
|
hpnicfDot11sMpPlcyIndex
|
|
}
|
|
::= { hpnicfDot11sMpPlcyTable 1 }
|
|
|
|
HpnicfDot11sMpPlcyEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sMpPlcyIndex Integer32,
|
|
hpnicfDot11sMpPlcyName OCTET STRING,
|
|
hpnicfDot11sMpPlcyInitEnable TruthValue,
|
|
hpnicfDot11sMlspEnable TruthValue,
|
|
hpnicfDot11sProbReqInterval Integer32,
|
|
hpnicfDot11sRoleAuthEnable TruthValue,
|
|
hpnicfDot11sLinkHoldRSSI Integer32,
|
|
hpnicfDot11sLinkHoldTime Integer32,
|
|
hpnicfDot11sSwitchMargin Integer32,
|
|
hpnicfDot11sLinkSaturationRSSI Integer32,
|
|
hpnicfDot11sLinkRateMode INTEGER,
|
|
hpnicfDot11sMaxLinkNum Integer32,
|
|
hpnicfDot11sMpPlcyRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11sMpPlcyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the MP policy index."
|
|
::= { hpnicfDot11sMpPlcyEntry 1 }
|
|
|
|
hpnicfDot11sMpPlcyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..15))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the MP policy name.
|
|
MP policy can not be created with name 'a', 'al', 'all' or
|
|
'default_mp_plcy'.
|
|
Modification is not supported."
|
|
::= { hpnicfDot11sMpPlcyEntry 2 }
|
|
|
|
hpnicfDot11sMpPlcyInitEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the link initiation for
|
|
the MP policy is enabled.
|
|
'true': The link initiation for the MP policy is enabled.
|
|
'false': The link initiation for the MP policy is disabled."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11sMpPlcyEntry 3 }
|
|
|
|
hpnicfDot11sMlspEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the mesh link switch protocol (MLSP)
|
|
is enabled.
|
|
'true': MLSP is enabled.
|
|
'false': MLSP is disabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11sMpPlcyEntry 4 }
|
|
|
|
hpnicfDot11sProbReqInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "millisecond"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the probe request interval."
|
|
::= { hpnicfDot11sMpPlcyEntry 5 }
|
|
|
|
hpnicfDot11sRoleAuthEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the device can play as the role
|
|
of an authenticator."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11sMpPlcyEntry 6 }
|
|
|
|
hpnicfDot11sLinkHoldRSSI OBJECT-TYPE
|
|
SYNTAX Integer32(5..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the link-hold
|
|
receive signal strength indicator (RSSI)."
|
|
::= { hpnicfDot11sMpPlcyEntry 7 }
|
|
|
|
hpnicfDot11sLinkHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32(1000..20000)
|
|
UNITS "millisecond"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the link-hold time."
|
|
::= { hpnicfDot11sMpPlcyEntry 8 }
|
|
|
|
hpnicfDot11sSwitchMargin OBJECT-TYPE
|
|
SYNTAX Integer32(1..100)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the link-switch margin."
|
|
::= { hpnicfDot11sMpPlcyEntry 9 }
|
|
|
|
hpnicfDot11sLinkSaturationRSSI OBJECT-TYPE
|
|
SYNTAX Integer32(30..150)
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the link saturation
|
|
receive signal strength indicator (RSSI)."
|
|
::= { hpnicfDot11sMpPlcyEntry 10 }
|
|
|
|
hpnicfDot11sLinkRateMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fixed(1),
|
|
realtime(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the rate mode of the mesh link."
|
|
DEFVAL { fixed }
|
|
::= { hpnicfDot11sMpPlcyEntry 11 }
|
|
|
|
hpnicfDot11sMaxLinkNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum number of the mesh link."
|
|
::= { hpnicfDot11sMpPlcyEntry 12 }
|
|
|
|
hpnicfDot11sMpPlcyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11sMpPlcyEntry 13 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sMpPlcyTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sMlspCfgTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sMlspCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sMlspCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure MLSP proxy MAC address.
|
|
Only if the specified MP policy is modifiable and the MLSP
|
|
is enabled, the row of this table can be created and deleted.
|
|
The row of this table can not be modified."
|
|
::= { hpnicfDot11sConfigGroup 4 }
|
|
|
|
hpnicfDot11sMlspCfgEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sMlspCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of MLSP proxy MAC address."
|
|
INDEX
|
|
{
|
|
hpnicfDot11sMpPlcyIndex,
|
|
hpnicfDot11sMlspProxyIndex
|
|
}
|
|
::= { hpnicfDot11sMlspCfgTable 1 }
|
|
|
|
HpnicfDot11sMlspCfgEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sMlspProxyIndex Integer32,
|
|
hpnicfDot11sMlspProxyMac MacAddress,
|
|
hpnicfDot11sMlspRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11sMlspProxyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the MLSP proxy MAC address index."
|
|
::= { hpnicfDot11sMlspCfgEntry 1 }
|
|
|
|
hpnicfDot11sMlspProxyMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the MLSP proxy MAC address."
|
|
::= { hpnicfDot11sMlspCfgEntry 2 }
|
|
|
|
hpnicfDot11sMlspRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11sMlspCfgEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sMlspCfgTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sRadioCfgTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sRadioCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sRadioCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure mesh to the specified radio."
|
|
::= { hpnicfDot11sConfigGroup 5 }
|
|
|
|
hpnicfDot11sRadioCfgEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sRadioCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains mesh configure information
|
|
of the specified radio."
|
|
INDEX
|
|
{
|
|
hpnicfDot11sCfgRadioIndex
|
|
}
|
|
::= { hpnicfDot11sRadioCfgTable 1 }
|
|
|
|
HpnicfDot11sRadioCfgEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sCfgRadioIndex HpnicfDot11RadioElementIndex,
|
|
hpnicfDot11sMeshPflMap Integer32,
|
|
hpnicfDot11sMpPlcyMap Integer32
|
|
}
|
|
|
|
hpnicfDot11sCfgRadioIndex OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioElementIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents index of the radio."
|
|
::= { hpnicfDot11sRadioCfgEntry 1 }
|
|
|
|
hpnicfDot11sMeshPflMap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of the mesh profile mapped to
|
|
the specified radio. The value is zero when the radio is not
|
|
binding mesh profile."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11sRadioCfgEntry 2 }
|
|
|
|
hpnicfDot11sMpPlcyMap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the index of the MP policy mapped to the
|
|
specified radio. The MP policy is 'default_mp_plcy' when the radio
|
|
is not binding user-defined MP policy.
|
|
The index of 'default_mp_plcy' is 1.
|
|
This object can not be modified when the radio is enabled."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11sRadioCfgEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sRadioCfgTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sAPCfgTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sAPCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sAPCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure mesh to the specified AP."
|
|
::= { hpnicfDot11sConfigGroup 6 }
|
|
|
|
hpnicfDot11sAPCfgEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sAPCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains mesh configure information
|
|
of the specified AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APElementIndex
|
|
}
|
|
::= { hpnicfDot11sAPCfgTable 1 }
|
|
|
|
HpnicfDot11sAPCfgEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sPortalEnable TruthValue
|
|
}
|
|
|
|
hpnicfDot11sPortalEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the portal service is enabled.
|
|
'true': The portal service is enabled.
|
|
'false': The portal service is disabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11sAPCfgEntry 1 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sAPCfgTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sWDSPeerMacTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sWDSPeerMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sWDSPeerMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure wireless distribution system (WDS).
|
|
The row of this table can not be modified."
|
|
::= { hpnicfDot11sWDSConfigGroup 1 }
|
|
|
|
hpnicfDot11sWDSPeerMacEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sWDSPeerMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of WDS."
|
|
INDEX
|
|
{
|
|
hpnicfDot11sCfgRadioIndex,
|
|
hpnicfDot11sWDSPeerMacIndex
|
|
}
|
|
::= { hpnicfDot11sWDSPeerMacTable 1 }
|
|
|
|
HpnicfDot11sWDSPeerMacEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sWDSPeerMacIndex Integer32,
|
|
hpnicfDot11sWDSPeerMacAddrss MacAddress,
|
|
hpnicfDot11sWDSPeerMacRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11sWDSPeerMacIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peer MAC address index."
|
|
::= { hpnicfDot11sWDSPeerMacEntry 1 }
|
|
|
|
hpnicfDot11sWDSPeerMacAddrss OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peer MAC address."
|
|
::= { hpnicfDot11sWDSPeerMacEntry 2 }
|
|
|
|
hpnicfDot11sWDSPeerMacRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11sWDSPeerMacEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sWDSPeerMacTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sMeshLinkStatusTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sMeshLinkStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sMeshLinkStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to represent the status of mesh link."
|
|
::= { hpnicfDot11sMeshStatusGroup 1 }
|
|
|
|
hpnicfDot11sMeshLinkStatusEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sMeshLinkStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains status information of mesh link."
|
|
INDEX
|
|
{
|
|
hpnicfDot11sMeshLinkIfIndex
|
|
}
|
|
::= { hpnicfDot11sMeshLinkStatusTable 1 }
|
|
|
|
HpnicfDot11sMeshLinkStatusEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sMeshLinkIfIndex Unsigned32,
|
|
hpnicfDot11sMeshLinkName OCTET STRING,
|
|
hpnicfDot11sMeshLinkBSSID MacAddress,
|
|
hpnicfDot11sMeshLinkPeerMac MacAddress,
|
|
hpnicfDot11sMeshLinkExistDuration Integer32,
|
|
hpnicfDot11sMeshLinkType INTEGER
|
|
}
|
|
|
|
hpnicfDot11sMeshLinkIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the interface index of the mesh link."
|
|
::= { hpnicfDot11sMeshLinkStatusEntry 1 }
|
|
|
|
hpnicfDot11sMeshLinkName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the name of the mesh link."
|
|
::= { hpnicfDot11sMeshLinkStatusEntry 2 }
|
|
|
|
hpnicfDot11sMeshLinkBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the BSS ID of the mesh link."
|
|
::= { hpnicfDot11sMeshLinkStatusEntry 3 }
|
|
|
|
hpnicfDot11sMeshLinkPeerMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the peer MAC address of the mesh link."
|
|
::= { hpnicfDot11sMeshLinkStatusEntry 4 }
|
|
|
|
hpnicfDot11sMeshLinkExistDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the time for which the link has been up."
|
|
::= { hpnicfDot11sMeshLinkStatusEntry 5 }
|
|
|
|
hpnicfDot11sMeshLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
dormant(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type for the link."
|
|
::= { hpnicfDot11sMeshLinkStatusEntry 6 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sMeshLinkStatusTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sMeshLinkStatisTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sMeshLinkStatisTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sMeshLinkStatisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to represent the statistical information of
|
|
mesh link."
|
|
::= { hpnicfDot11sMeshStatusGroup 2 }
|
|
|
|
hpnicfDot11sMeshLinkStatisEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sMeshLinkStatisEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains statistical information of mesh link."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APElementIndex,
|
|
hpnicfDot11sMeshLinkStatIfIndex
|
|
}
|
|
::= { hpnicfDot11sMeshLinkStatisTable 1 }
|
|
|
|
HpnicfDot11sMeshLinkStatisEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sMeshLinkStatIfIndex Unsigned32,
|
|
hpnicfDot11sMeshLinkNbrIndex Unsigned32,
|
|
hpnicfDot11sMeshLinkRxTotByte Counter32,
|
|
hpnicfDot11sMeshLinkRxTotPkt Counter32,
|
|
hpnicfDot11sMeshLinkRxUniPkt Counter32,
|
|
hpnicfDot11sMeshLinkRxBrocPkt Counter32,
|
|
hpnicfDot11sMeshLinkRxMuticPkt Counter32,
|
|
hpnicfDot11sMeshLinkRxDiscPkt Counter32,
|
|
hpnicfDot11sMeshLinkTxTotByte Counter32,
|
|
hpnicfDot11sMeshLinkTxTotPkt Counter32,
|
|
hpnicfDot11sMeshLinkTxUniPkt Counter32,
|
|
hpnicfDot11sMeshLinkTxBrocPkt Counter32,
|
|
hpnicfDot11sMeshLinkTxMuticPkt Counter32,
|
|
hpnicfDot11sMeshLinkTxDiscPkt Counter32,
|
|
hpnicfDot11sMeshLinkIFName OCTET STRING
|
|
}
|
|
|
|
hpnicfDot11sMeshLinkStatIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the interface index of the mesh link."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 1 }
|
|
|
|
hpnicfDot11sMeshLinkNbrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the neighbor index of the mesh link."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 2 }
|
|
|
|
hpnicfDot11sMeshLinkRxTotByte OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of bytes that the mesh link received."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 3 }
|
|
|
|
hpnicfDot11sMeshLinkRxTotPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of packets that the mesh link received."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 4 }
|
|
|
|
hpnicfDot11sMeshLinkRxUniPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of unicast packets that the mesh link received."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 5 }
|
|
|
|
hpnicfDot11sMeshLinkRxBrocPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of broadcast packets that the mesh link
|
|
received."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 6 }
|
|
|
|
hpnicfDot11sMeshLinkRxMuticPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of multicast packets that the mesh link
|
|
received."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 7 }
|
|
|
|
hpnicfDot11sMeshLinkRxDiscPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of packets that the mesh link discarded."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 8 }
|
|
|
|
hpnicfDot11sMeshLinkTxTotByte OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the total amount of bytes that the mesh link transmitted."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 9 }
|
|
|
|
hpnicfDot11sMeshLinkTxTotPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the total amount of packets that the mesh link transmitted."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 10 }
|
|
|
|
hpnicfDot11sMeshLinkTxUniPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of unicast packets that the mesh link
|
|
transmitted."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 11 }
|
|
|
|
hpnicfDot11sMeshLinkTxBrocPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of broadcast packets that the mesh link
|
|
transmitted."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 12 }
|
|
|
|
hpnicfDot11sMeshLinkTxMuticPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of multicast packets that the mesh link
|
|
transmitted."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 13 }
|
|
|
|
hpnicfDot11sMeshLinkTxDiscPkt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the amount of discarded packets that the mesh link
|
|
transmitted."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 14 }
|
|
|
|
hpnicfDot11sMeshLinkIFName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the name of mesh link interface."
|
|
::= { hpnicfDot11sMeshLinkStatisEntry 15 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sMeshLinkStatisTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11sMeshNbrStatusTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11sMeshNbrStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11sMeshNbrStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the status information for the neighbors of MP."
|
|
::= { hpnicfDot11sMeshStatusGroup 3 }
|
|
|
|
hpnicfDot11sMeshNbrStatusEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11sMeshNbrStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry of the table will provide status information for the
|
|
neighbors of MP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APElementIndex,
|
|
hpnicfDot11sMeshNbrIndex
|
|
}
|
|
::= { hpnicfDot11sMeshNbrStatusTable 1 }
|
|
|
|
HpnicfDot11sMeshNbrStatusEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11sMeshNbrIndex Unsigned32,
|
|
hpnicfDot11sMeshNbrRadioID Unsigned32,
|
|
hpnicfDot11sMeshLocalMeshID OCTET STRING,
|
|
hpnicfDot11sMeshNbrMeshID OCTET STRING,
|
|
hpnicfDot11sMeshNbrBSSID MacAddress,
|
|
hpnicfDot11sMeshNbrPeerMac MacAddress,
|
|
hpnicfDot11sMeshLinkInMp Unsigned32,
|
|
hpnicfDot11sMeshMPLinkStatus INTEGER,
|
|
hpnicfDot11sMeshNbrChannel Unsigned32,
|
|
hpnicfDot11sMeshNbrLinkDuration Integer32,
|
|
hpnicfDot11sMeshNbrRSSI Integer32,
|
|
hpnicfDot11sMeshNbrSNR Integer32
|
|
}
|
|
|
|
hpnicfDot11sMeshNbrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the index for the neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 1 }
|
|
|
|
hpnicfDot11sMeshNbrRadioID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio ID of the neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 2 }
|
|
|
|
hpnicfDot11sMeshLocalMeshID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the local mesh ID."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 3 }
|
|
|
|
hpnicfDot11sMeshNbrMeshID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the mesh ID of the neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 4 }
|
|
|
|
hpnicfDot11sMeshNbrBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the BSS ID of the neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 5 }
|
|
|
|
hpnicfDot11sMeshNbrPeerMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the MAC address of the peer neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 6 }
|
|
|
|
hpnicfDot11sMeshLinkInMp OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interface index of mesh link that used to connect with
|
|
this neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 7 }
|
|
|
|
hpnicfDot11sMeshMPLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
processing(1),
|
|
up(2),
|
|
down(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the status of mesh link that used to connect with this
|
|
neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 8 }
|
|
|
|
hpnicfDot11sMeshNbrChannel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the channel number used by this neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 9 }
|
|
|
|
hpnicfDot11sMeshNbrLinkDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the duration of mesh link that used to connect with this
|
|
neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 10 }
|
|
|
|
hpnicfDot11sMeshNbrRSSI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the RSSI of mesh link that used to connect with this
|
|
neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 11 }
|
|
|
|
hpnicfDot11sMeshNbrSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the SNR of mesh link that used to connect with this
|
|
neighbor."
|
|
::= { hpnicfDot11sMeshNbrStatusEntry 12 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11sMeshNbrStatusTable Definition
|
|
-- *****************************************************************************
|
|
END
|