WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/hp/HPICF-IPSLA-MIB

2443 lines
86 KiB
Plaintext
Raw Permalink Blame History

--**MOD+***********************************************************************
--* Module: hpicfIpSla.mib
--*
--* Copyright (C) 2016 Hewlett Packard Enterprise Development LP
--* All Rights Reserved.
--*
--* The contents of this software are proprietary and confidential
--* to the Hewlett Packard Enterprise Development LP. No part of this
--* program may be photocopied, reproduced, or translated into another
--* programming language without prior written consent of the
--* Hewlett Packard Enterprise Development LP.
--*
--* Purpose: This file contains MIB definition of HPICF-IPSLA-MIB
--*
--**MOD-***********************************************************************
HPICF-IPSLA-MIB DEFINITIONS ::= BEGIN
IMPORTS
hpSwitch
FROM HP-ICF-OID
OBJECT-TYPE, MODULE-IDENTITY, Integer32,
Unsigned32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InterfaceIndexOrZero
FROM IF-MIB
RowStatus, DateAndTime
FROM SNMPv2-TC
InetAddressType,InetAddress, InetPortNumber
FROM INET-ADDRESS-MIB;
-- 1.3.6.1.4.1.11.2.14.11.5.1.57
hpicfIpSla MODULE-IDENTITY
LAST-UPDATED "201611100000Z" -- November 10, 2016 at 00:00 GMT
ORGANIZATION "HP Networking."
CONTACT-INFO "Hewlett Packard Enterprise Development LP.
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module contains HP proprietary
objects for managing IP Service Level
Agreement (SLA)."
REVISION "201611100000Z" -- November 10, 2016 at 00:00 GMT
DESCRIPTION "Changed the MIB description of PayloadSize"
REVISION "201610200000Z" -- October 20, 2016 at 00:00 GMT
DESCRIPTION "Changed the MIB description"
REVISION "201610050000Z" -- October 5, 2016 at 00:00 GMT
DESCRIPTION "Added MIB objects for UDP, TCP and ICMP show functions"
REVISION "201609290000Z" -- September 29, 2016 at 00:00 GMT
DESCRIPTION "Added Threshold count object."
REVISION "201609150000Z" -- September 15, 2016 at 00:00 GMT
DESCRIPTION "Added MIB objects for DNS and DHCP error counts."
REVISION "201607250000Z" -- July 25, 2016 at 00:00 GMT
DESCRIPTION "Added Jitter and VoIP objects."
REVISION "201607070000Z" -- July 7, 2016 at 00:00 GMT
DESCRIPTION "Added MIB object for status and next schedule value."
REVISION "201606200000Z" -- June 20, 2016 at 00:00 GMT
DESCRIPTION "Added DNS and DHCP."
REVISION "201603140000Z" -- March 14, 2016 at 00:00 GMT
DESCRIPTION "Removed Added codec type and advantage factor."
REVISION "201602160000Z" -- February 16, 2016 at 00:00 GMT
DESCRIPTION "Added codec type and advantage factor."
REVISION "201506010000Z" -- June 1, 2015 at 00:00 GMT
DESCRIPTION "Initial revision."
::= { hpSwitch 127 }
-- -------------------------------------------------------------
-- Start of MIB Objects
-- -------------------------------------------------------------
hpicfIpSlaNotifications OBJECT IDENTIFIER ::= { hpicfIpSla 0 }
hpicfIpSlaObjects OBJECT IDENTIFIER ::= { hpicfIpSla 1 }
hpicfIpSlaConformance OBJECT IDENTIFIER ::= { hpicfIpSla 2 }
--
-- MIB objects
--
hpicfIpSlaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies IP SLA test parameters as SLA entries."
::= { hpicfIpSlaObjects 1 }
hpicfIpSlaEntry OBJECT-TYPE
SYNTAX HpicfIpSlaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the destination IP address/
Hostname, Source address, Source Interface ID & Row status
corresponding to each SLA test."
INDEX { hpicfIpSlaID }
::= { hpicfIpSlaTable 1 }
HpicfIpSlaEntry ::= SEQUENCE
{
hpicfIpSlaID Integer32,
hpicfIpSlaType INTEGER,
hpicfIpSlaAdminState INTEGER,
hpicfIpSlaSourceAddressType InetAddressType,
hpicfIpSlaSourceAddress InetAddress,
hpicfIpSlaL4SourcePort InetPortNumber,
hpicfIpSlaSourceInterface InterfaceIndexOrZero,
hpicfIpSlaDestAddressType InetAddressType,
hpicfIpSlaDestAddress InetAddress,
hpicfIpSlaL4DestPort InetPortNumber,
hpicfIpSlaRowStatus RowStatus
}
hpicfIpSlaID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is an identifier for the IP SLA."
::= { hpicfIpSlaEntry 1 }
hpicfIpSlaType OBJECT-TYPE
SYNTAX INTEGER
{
icmpEcho(1),
udpEcho(2),
udpJitter(3),
udpJitterVoIP(4),
tcpConnect(5),
dhcp(6),
dns(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA Probe Type. IcmpEcho is similar to ping protocol and
the destination should be enabled with responder
functionality for udpEcho, udpJitter, udpJitterVoIP and
tcpConnect. For DHCP and DNS, destination device should be
enabled with DHCP and DNS servers, respectively."
::= { hpicfIpSlaEntry 2 }
hpicfIpSlaAdminState OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Enable or disable the IP Service Level Agreement (SLA) probe."
DEFVAL{ disable }
::= { hpicfIpSlaEntry 3}
hpicfIpSlaSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA source address type."
::= { hpicfIpSlaEntry 4 }
hpicfIpSlaSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA source address."
::= { hpicfIpSlaEntry 5 }
hpicfIpSlaL4SourcePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA source port to be used for SLA probes that use a
transport layer such as udpEcho, udpJitter, udpJitterVoIP
and tcpConnect. The allowed range is from 1024 to 65535."
::= { hpicfIpSlaEntry 6 }
hpicfIpSlaSourceInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA source interface."
::= { hpicfIpSlaEntry 7 }
hpicfIpSlaDestAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA destination address type."
::= { hpicfIpSlaEntry 8 }
hpicfIpSlaDestAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA destination address."
::= { hpicfIpSlaEntry 9 }
hpicfIpSlaL4DestPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Port on target device which responds back to the probe.
This is used for SLA probes that use a transport layer
such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect
SLA types. The allowed range is from 1024 to 65535."
::= { hpicfIpSlaEntry 10 }
hpicfIpSlaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA row status."
::= { hpicfIpSlaEntry 11 }
--
--- SLA to Probe attributes Configuration - Table
--
hpicfIpSlaAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies IP SLA test parameters as SLA
entries."
::= { hpicfIpSlaObjects 2 }
hpicfIpSlaAttrEntry OBJECT-TYPE
SYNTAX HpicfIpSlaAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the attributes of SLA
test such as scheduling parameters, TOS, payload size,
history bucket size and inter packet interval,
corresponding to each SLA test."
INDEX { hpicfIpSlaID }
::= { hpicfIpSlaAttrTable 1 }
HpicfIpSlaAttrEntry ::= SEQUENCE
{
hpicfIpSlaSchedStartTime DateAndTime,
hpicfIpSlaSchedEndTime DateAndTime,
hpicfIpSlaSchedFreq Unsigned32,
hpicfIpSlaSchedRepeat Unsigned32,
hpicfIpSlaAttrTOS Unsigned32,
hpicfIpSlaAttrHistorySize Unsigned32,
hpicfIpSlaAttrPayloadSize Unsigned32,
hpicfIpSlaAttrNumPkts Unsigned32,
hpicfIpSlaAttrPktInterval Unsigned32,
hpicfIpSlaAttrRowStatus RowStatus,
hpicfIpSlaAttrCodecType INTEGER,
hpicfIpSlaAttrAdvntgFactr Unsigned32
}
hpicfIpSlaSchedStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Timestamp to denote when to start this SLA probe."
::= { hpicfIpSlaAttrEntry 1 }
hpicfIpSlaSchedEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Timestamp to denote when to end this SLA probe."
::= { hpicfIpSlaAttrEntry 2 }
hpicfIpSlaSchedFreq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Frequency in seconds. This value is used to send probes."
DEFVAL { 60 }
::= { hpicfIpSlaAttrEntry 3 }
hpicfIpSlaSchedRepeat OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Number of times this test will be repeated."
::= { hpicfIpSlaAttrEntry 4 }
hpicfIpSlaAttrTOS OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Type of service value to be set for the probe packet."
::= { hpicfIpSlaAttrEntry 5 }
hpicfIpSlaAttrHistorySize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Number of history records to be maintained for SLA test.
Size can vary from 1 to 50."
DEFVAL { 25 }
::= { hpicfIpSlaAttrEntry 6 }
hpicfIpSlaAttrPayloadSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Size of the packet payload to be sent out for each probe.
It can be set from 0 to 1440 for udpEcho, icmpEcho and
from 68 to 8100 for udpJitter."
DEFVAL { 0 }
::= { hpicfIpSlaAttrEntry 7 }
hpicfIpSlaAttrNumPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Number of packets to be sent out for a single probe for
jitter SLA type."
DEFVAL { 10 }
::= { hpicfIpSlaAttrEntry 8 }
hpicfIpSlaAttrPktInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Inter packet interval in milli seconds. Which is to be
used for packets that are sent out for a single probe for
jitter SLA type."
::= { hpicfIpSlaAttrEntry 9 }
hpicfIpSlaAttrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA attribute row status."
::= { hpicfIpSlaAttrEntry 10 }
hpicfIpSlaAttrCodecType OBJECT-TYPE
SYNTAX INTEGER
{
g711a(1),
g711u(2),
g729a(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Codec-type for the VoIP SLA test."
::= { hpicfIpSlaAttrEntry 11 }
hpicfIpSlaAttrAdvntgFactr OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Advantage factor to calculate the MOS and ICPIF values
for VoIP SLA type."
DEFVAL { 0 }
::= { hpicfIpSlaAttrEntry 12 }
--
-- SLA to Threshold Configuration Table
--
hpicfIpSlaThrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaThrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies IP SLA threshold-action parameters as
entries. When one of the monitored parameters of an SLA
test goes beyond the configured thresholds, notifications
are generated either as traps or syslog messages."
::= { hpicfIpSlaObjects 3 }
hpicfIpSlaThrEntry OBJECT-TYPE
SYNTAX HpicfIpSlaThrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the Metric type, upper
and lower limit of thresholds, threshold type and action
to be taken."
INDEX { hpicfIpSlaID, hpicfIpSlaThrMetricType}
::= { hpicfIpSlaThrTable 1 }
HpicfIpSlaThrEntry ::= SEQUENCE
{
hpicfIpSlaThrMetricType INTEGER,
hpicfIpSlaThrUpper Integer32,
hpicfIpSlaThrLower Integer32,
hpicfIpSlaThrType INTEGER,
hpicfIpSlaThrCount Unsigned32,
hpicfIpSlaThrAction INTEGER,
hpicfIpSlaThrRowStatus RowStatus
}
hpicfIpSlaThrMetricType OBJECT-TYPE
SYNTAX INTEGER
{
rtt(1),
jitter(2),
srcTodstTime(3),
dstTosrcTime(4),
mos(5),
icpif(6),
packetLoss(7),
testCompletion(8),
sdJitterPos(9),
dsJitterPos(10)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SLA metric type to be monitored. The rtt type is the
round trip time of the probe packet. The jitter type is
the inter-packet delay variance. The srcTodstTime type is
the one-way trip time from source to destination. The
dstTosrcTtime type is the one-way trip time from
destination to source. The Mean Opinion Scores (MOS) type
is derived only for udpJitterVoIP SLA. The Calculated
Planning Impairment Factor (ICPIF) type is derived only
for udpJitterVoIP SLA. ThepacketLoss type is to monitor
loss of communication. The testCompletion type is for
notifying about the completion of probe test. The
sdJitterPos type is the source-to-destination positive
jitter and the dsJitterPos type is the
destination-to-source positivejitter."
::= { hpicfIpSlaThrEntry 1 }
hpicfIpSlaThrUpper OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Acceptable upper-limit of threshold value for SLA. This
value is not applicable when hpicfIpSlaThrMetricType
is set to packetLoss and testCompletion."
::= { hpicfIpSlaThrEntry 2 }
hpicfIpSlaThrLower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Acceptable lower-limit of threshold value for SLA. This
value is not applicable when hpicfIpSlaThrMetricType
is set to packetLoss and testCompletion."
::= { hpicfIpSlaThrEntry 3 }
hpicfIpSlaThrType OBJECT-TYPE
SYNTAX INTEGER
{
immediate(1),
consecutive(2),
aggregated(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Configure threshold type to trigger action. When a trap/log
has to be generated each time the threshold is breached,
immediate threshold type can be used. The Consecutive threshold
type generates traps/logs when the threshold is violated a
certain number of times This value is not applicable when
hpicfIpSlaThrMetricType is set to testCompletion. The aggregated
threshold type is used to generate traps/logs for aggregated probes."
::= { hpicfIpSlaThrEntry 4}
hpicfIpSlaThrCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value for the number of consecutive times the upper or lower
limit of the threshold is violated. For example, this can be
configured to trigger a trap/log when the RTT is more than the
upper limit, x number of times consecutively. This value is
applicable only if hpicfIpSlaThrType is set to consecutive."
::= { hpicfIpSlaThrEntry 5}
hpicfIpSlaThrAction OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
trap(1),
log(2),
trapAndLog(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The number of probe packets used to calculate Round Trip Time
for jitter test."
::= { hpicfIpSlaThrEntry 6}
hpicfIpSlaThrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Threshold table row status."
::= { hpicfIpSlaThrEntry 7}
--
-- IP SLA Responder objects
--
hpicfIpSlaRespTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaRespEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies IP SLA responder parameters as entries."
::= { hpicfIpSlaObjects 4 }
hpicfIpSlaRespEntry OBJECT-TYPE
SYNTAX HpicfIpSlaRespEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the local IP address,
port number and row status corresponding to each SLA
responder config."
INDEX
{
hpicfIpSlaRespType,
hpicfIpSlaRespAddress,
hpicfIpSlaRespL4Port
}
::= { hpicfIpSlaRespTable 1 }
HpicfIpSlaRespEntry ::= SEQUENCE
{
hpicfIpSlaRespType INTEGER,
hpicfIpSlaRespAddressType InetAddressType,
hpicfIpSlaRespAddress InetAddress,
hpicfIpSlaRespL4Port InetPortNumber,
hpicfIpSlaRespRowStatus RowStatus
}
hpicfIpSlaRespType OBJECT-TYPE
SYNTAX INTEGER
{
udpEcho(1),
udpJitter(2),
udpJitterVoIP(3),
tcpConnect(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The SLA responder type. The udpEcho and tcpConnect objects
are for UDP and TCP packets, respectively. The udpJitter
and udpJitterVoIP values calculate one-way delay, therefore
a timestamp has to be embedded while replying back. This is
one of the indexes for the hpicfIpSlaRespTable."
::= { hpicfIpSlaRespEntry 1 }
hpicfIpSlaRespAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA responder IP address type."
::= { hpicfIpSlaRespEntry 2 }
hpicfIpSlaRespAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The local IP address to which the responder is bound.
This is one of the indexes for the hpicfIpSlaRespTable."
::= { hpicfIpSlaRespEntry 3 }
hpicfIpSlaRespL4Port OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "L4 port number on hpicfIpSlaRespAddress where the responder
listens for probe packets from SLA source. This is one of
the indexes for the hpicfIpSlaRespTable. The allowed range
is from 1024 to 65535."
::= { hpicfIpSlaRespEntry 4 }
hpicfIpSlaRespRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA responder row status."
::= { hpicfIpSlaRespEntry 5}
--
-- IP SLA result Table
--
hpicfIpSlaMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies the IP SLA result parameters as entries."
::= { hpicfIpSlaObjects 5 }
hpicfIpSlaMsgEntry OBJECT-TYPE
SYNTAX HpicfIpSlaMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the probe received time,
probe error counters and threshold hit counter."
INDEX { hpicfIpSlaID }
::= { hpicfIpSlaMsgTable 1 }
HpicfIpSlaMsgEntry ::= SEQUENCE
{
hpicfIpSlaMsgLastProbeRcvd Unsigned32,
hpicfIpSlaMsgLastClrRec Unsigned32,
hpicfIpSlaMsgSuccProbe Unsigned32,
hpicfIpSlaMsgIntErr Unsigned32,
hpicfIpSlaMsgLocIntfDown Unsigned32,
hpicfIpSlaMsgResTimeout Unsigned32,
hpicfIpSlaMsgDNSFormatErr Unsigned32,
hpicfIpSlaMsgServerFaild Unsigned32,
hpicfIpSlaMsgDomainNotExist Unsigned32,
hpicfIpSlaMsgFunctnNotImpl Unsigned32,
hpicfIpSlaMsgServerRefusd Unsigned32,
hpicfIpSlaMsgNameNotExist Unsigned32,
hpicfIpSlaMsgRRsetNotExist Unsigned32,
hpicfIpSlaMsgServerNotInZone Unsigned32,
hpicfIpSlaMsgNameNotInZone Unsigned32,
hpicfIpSlaMsgDHCPFaildResln Unsigned32,
hpicfIpSlaMsgOffrNotRecvd Unsigned32,
hpicfIpSlaMsgNACKRecvd Unsigned32,
hpicfIpSlaMsgThrHitRTT Unsigned32,
hpicfIpSlaMsgStatus Unsigned32,
hpicfIpSlaMsgNxtSched Unsigned32,
hpicfIpSlaMsgThrHitPostvSDAvg Unsigned32,
hpicfIpSlaMsgThrHitPostvDSAvg Unsigned32,
hpicfIpSlaMsgThrHitOneWayDSAvg Unsigned32,
hpicfIpSlaMsgThrHitOneWaySDAvg Unsigned32,
hpicfIpSlaMsgThrHitAvgICPIF Unsigned32,
hpicfIpSlaMsgThrHitAvgMOS Unsigned32,
hpicfIpSlaMsgNameServUnreach Unsigned32,
hpicfIpSlaMsgDHCPReleaseErr Unsigned32,
hpicfIpSlaMsgThrHitPktLoss Unsigned32,
hpicfIpSlaMsgDstUnreach Unsigned32,
hpicfIpSlaMsgProbeSkpd Unsigned32,
hpicfIpSlaMsgDNSResolnFailed Unsigned32,
hpicfIpSlaMsgNoRoutetoTgt Unsigned32,
hpicfIpSlaMsgUnbleToConctHost Unsigned32,
hpicfIpSlaMsgSuccConnection Unsigned32,
hpicfIpSlaMsgPossTrailDropped Unsigned32,
hpicfIpSlaMsgNoRespFrmTgt Unsigned32,
hpicfIpSlaMsgProbeRespRecvd Unsigned32
}
hpicfIpSlaMsgLastProbeRcvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Last probe received time."
::= { hpicfIpSlaMsgEntry 1}
hpicfIpSlaMsgLastClrRec OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Last clear record done time."
::= { hpicfIpSlaMsgEntry 2}
hpicfIpSlaMsgSuccProbe OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of successful probes."
::= { hpicfIpSlaMsgEntry 3}
hpicfIpSlaMsgIntErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Internal error count."
::= { hpicfIpSlaMsgEntry 4}
hpicfIpSlaMsgLocIntfDown OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of probes failed due to local interface failure."
::= { hpicfIpSlaMsgEntry 5}
hpicfIpSlaMsgResTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resolution timed out."
::= { hpicfIpSlaMsgEntry 6}
hpicfIpSlaMsgDNSFormatErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of DNS format errors."
::= { hpicfIpSlaMsgEntry 7}
hpicfIpSlaMsgServerFaild OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of server failed errors."
::= { hpicfIpSlaMsgEntry 8}
hpicfIpSlaMsgDomainNotExist OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of domain does not exist errors."
::= { hpicfIpSlaMsgEntry 9}
hpicfIpSlaMsgFunctnNotImpl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of function not implemented errors."
::= { hpicfIpSlaMsgEntry 10}
hpicfIpSlaMsgServerRefusd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of server refused errors."
::= { hpicfIpSlaMsgEntry 11}
hpicfIpSlaMsgNameNotExist OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of name does not exist errors."
::= { hpicfIpSlaMsgEntry 12}
hpicfIpSlaMsgRRsetNotExist OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of RRset that should not exist errors."
::= { hpicfIpSlaMsgEntry 13}
hpicfIpSlaMsgServerNotInZone OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of server not in the zone errors."
::= { hpicfIpSlaMsgEntry 14}
hpicfIpSlaMsgNameNotInZone OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of name not in the zone errors."
::= { hpicfIpSlaMsgEntry 15}
hpicfIpSlaMsgDHCPFaildResln OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of DHCP failed resolutions."
::= { hpicfIpSlaMsgEntry 16}
hpicfIpSlaMsgOffrNotRecvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of DHCP offer not received errors."
::= { hpicfIpSlaMsgEntry 17}
hpicfIpSlaMsgNACKRecvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of NACKs received."
::= { hpicfIpSlaMsgEntry 18}
hpicfIpSlaMsgThrHitRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of round-trip time hits to threshold."
::= { hpicfIpSlaMsgEntry 19}
hpicfIpSlaMsgStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP SLA current running status."
::= { hpicfIpSlaMsgEntry 20}
hpicfIpSlaMsgNxtSched OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Next scheduled time of IP SLA probe."
::= { hpicfIpSlaMsgEntry 21}
hpicfIpSlaMsgThrHitPostvSDAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average positive jitter value of packets moving from
source to destination that cross the threshold."
::= { hpicfIpSlaMsgEntry 22}
hpicfIpSlaMsgThrHitPostvDSAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average positive jitter value of packets moving from
destination to source that cross the threshold."
::= { hpicfIpSlaMsgEntry 23}
hpicfIpSlaMsgThrHitOneWayDSAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average time taken by packets moving from
destination to source that cross the threshold."
::= { hpicfIpSlaMsgEntry 24}
hpicfIpSlaMsgThrHitOneWaySDAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average time taken by packets moving from
source to destination that cross the threshold."
::= { hpicfIpSlaMsgEntry 25}
hpicfIpSlaMsgThrHitAvgICPIF OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Average value of the ICPIF of packets that cross
the threshold."
::= { hpicfIpSlaMsgEntry 26}
hpicfIpSlaMsgThrHitAvgMOS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Average value of the MOS of packets that cross the threshold.
The Value of this object is 100 times of the actual value."
::= { hpicfIpSlaMsgEntry 27}
hpicfIpSlaMsgNameServUnreach OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of errors due to name server being unreachable."
::= { hpicfIpSlaMsgEntry 28}
hpicfIpSlaMsgDHCPReleaseErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of DHCP release errors."
::= { hpicfIpSlaMsgEntry 29}
hpicfIpSlaMsgThrHitPktLoss OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packet loss for each probe."
::= { hpicfIpSlaMsgEntry 30}
hpicfIpSlaMsgDstUnreach OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of probes failed due to destination not
being reachable."
::= { hpicfIpSlaMsgEntry 31}
hpicfIpSlaMsgProbeSkpd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of probes skipped due to DNS resolution delay."
::= { hpicfIpSlaMsgEntry 32}
hpicfIpSlaMsgDNSResolnFailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of times DNS resolution failed."
::= { hpicfIpSlaMsgEntry 33}
hpicfIpSlaMsgNoRoutetoTgt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of errors due to no route to target."
::= { hpicfIpSlaMsgEntry 34}
hpicfIpSlaMsgUnbleToConctHost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of errors due to no host connectivity."
::= { hpicfIpSlaMsgEntry 35}
hpicfIpSlaMsgSuccConnection OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of successful connections."
::= { hpicfIpSlaMsgEntry 36}
hpicfIpSlaMsgPossTrailDropped OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of probes dropped due to resource unavailability."
::= { hpicfIpSlaMsgEntry 37}
hpicfIpSlaMsgNoRespFrmTgt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of errors due to no response from target."
::= { hpicfIpSlaMsgEntry 38}
hpicfIpSlaMsgProbeRespRecvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of probes received."
::= { hpicfIpSlaMsgEntry 39}
--
-- IP SLA history Table
--
hpicfIpSlaHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies the history of IP SLA result."
::= { hpicfIpSlaObjects 6 }
hpicfIpSlaHistEntry OBJECT-TYPE
SYNTAX HpicfIpSlaHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the minimum, maximum
and the average time taken from source to destination
and vice versa."
INDEX { hpicfIpSlaID }
::= { hpicfIpSlaHistTable 1 }
HpicfIpSlaHistEntry ::= SEQUENCE
{
hpicfIpSlaHistMinRTT Unsigned32,
hpicfIpSlaHistMaxRTT Unsigned32,
hpicfIpSlaHistAvgRTT Unsigned32,
hpicfIpSlaHistTotalRTT Unsigned32,
hpicfIpSlaHistRTT2 Unsigned32,
hpicfIpSlaHistNumOfRTT Unsigned32,
hpicfIpSlaHistProbID Unsigned32,
hpicfIpSlaHistLastSuccProbTime Unsigned32,
hpicfIpSlaHistPacketLoss Unsigned32,
hpicfIpSlaHistSentPktNum Unsigned32,
hpicfIpSlaHistRecvdPktNum Unsigned32,
hpicfIpSlaHistMinStoDPostv Unsigned32,
hpicfIpSlaHistMaxStoDPostv Unsigned32,
hpicfIpSlaHistNumOfPosSD Unsigned32,
hpicfIpSlaHistSumOfPosSD Unsigned32,
hpicfIpSlaHistAvgStoDPostv Unsigned32,
hpicfIpSlaHistSum2PositivesSD Unsigned32,
hpicfIpSlaHistMinDtoSPostv Unsigned32,
hpicfIpSlaHistMaxDtoSPostv Unsigned32,
hpicfIpSlaHistNumOfPosDS Unsigned32,
hpicfIpSlaHistSumOfPosDS Unsigned32,
hpicfIpSlaHistAvgDtoSPostv Unsigned32,
hpicfIpSlaHistSum2PositivesDS Unsigned32,
hpicfIpSlaHistMinStoDNegtv Unsigned32,
hpicfIpSlaHistMaxStoDNegtv Unsigned32,
hpicfIpSlaHistNumOfNegSD Unsigned32,
hpicfIpSlaHistSumOfNegSD Unsigned32,
hpicfIpSlaHistAvgStoDNegtv Unsigned32,
hpicfIpSlaHistSum2NegativesSD Unsigned32,
hpicfIpSlaHistMinDtoSNegtv Unsigned32,
hpicfIpSlaHistMaxDtoSNegtv Unsigned32,
hpicfIpSlaHistNumOfNegDS Unsigned32,
hpicfIpSlaHistSumOfNegDS Unsigned32,
hpicfIpSlaHistAvgDtoSNegtv Unsigned32,
hpicfIpSlaHistSum2NegativesDS Unsigned32,
hpicfIpSlaHistMinStoDDelay Unsigned32,
hpicfIpSlaHistMaxStoDDelay Unsigned32,
hpicfIpSlaHistSumStoDDelay Unsigned32,
hpicfIpSlaHistNumOfDelaySD Unsigned32,
hpicfIpSlaHistSum2DelaySD Unsigned32,
hpicfIpSlaHistMinDtoSDelay Unsigned32,
hpicfIpSlaHistMaxDtoSDelay Unsigned32,
hpicfIpSlaHistNumOfDelayDS Unsigned32,
hpicfIpSlaHistSumDtoSDelay Unsigned32,
hpicfIpSlaHistSum2DelayDS Unsigned32,
hpicfIpSlaHistICPIF Unsigned32,
hpicfIpSlaHistMOS Unsigned32,
hpicfIpSlaHistAvgStoDDelay Unsigned32,
hpicfIpSlaHistAvgDtoSDelay Unsigned32
}
hpicfIpSlaHistMinRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum probe round-trip time."
::= { hpicfIpSlaHistEntry 1}
hpicfIpSlaHistMaxRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum probe round-trip time."
::= { hpicfIpSlaHistEntry 2}
hpicfIpSlaHistAvgRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average probe round-trip time."
::= { hpicfIpSlaHistEntry 3}
hpicfIpSlaHistTotalRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total probe round-trip time."
::= { hpicfIpSlaHistEntry 4}
hpicfIpSlaHistRTT2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of the squares of round-trip time."
::= { hpicfIpSlaHistEntry 5}
hpicfIpSlaHistNumOfRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of RTTs that are successfully measured."
::= { hpicfIpSlaHistEntry 6}
hpicfIpSlaHistProbID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Probe ID number."
::= { hpicfIpSlaHistEntry 7}
hpicfIpSlaHistLastSuccProbTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Last success probe time."
::= { hpicfIpSlaHistEntry 8}
hpicfIpSlaHistPacketLoss OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The packet loss value during the jitter test."
::= { hpicfIpSlaHistEntry 9}
hpicfIpSlaHistSentPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packets sent to responder."
::= { hpicfIpSlaHistEntry 10}
hpicfIpSlaHistRecvdPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packets received from responder."
::= { hpicfIpSlaHistEntry 11}
hpicfIpSlaHistMinStoDPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimal positive jitter value recorded from
source to destination."
::= { hpicfIpSlaHistEntry 12}
hpicfIpSlaHistMaxStoDPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum positive jitter value recorded from
source to destination."
::= { hpicfIpSlaHistEntry 13}
hpicfIpSlaHistNumOfPosSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of times the source to destination jitter
has a positive value."
::= { hpicfIpSlaHistEntry 14}
hpicfIpSlaHistSumOfPosSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of positive jitter values recorded from
source to destination."
::= { hpicfIpSlaHistEntry 15}
hpicfIpSlaHistAvgStoDPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average positive jitter value recorded from
source to destination."
::= { hpicfIpSlaHistEntry 16}
hpicfIpSlaHistSum2PositivesSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of square of positive jitter values recorded from
source to destination."
::= { hpicfIpSlaHistEntry 17}
hpicfIpSlaHistMinDtoSPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimal positive jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 18}
hpicfIpSlaHistMaxDtoSPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum positive jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 19}
hpicfIpSlaHistNumOfPosDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The positive jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 20}
hpicfIpSlaHistSumOfPosDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of positive jitter values recorded from
destination to source."
::= { hpicfIpSlaHistEntry 21}
hpicfIpSlaHistAvgDtoSPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average positive jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 22}
hpicfIpSlaHistSum2PositivesDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of square of positive jitter values recorded
from destination-to-source."
::= { hpicfIpSlaHistEntry 23}
hpicfIpSlaHistMinStoDNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimal negative jitter value recorded from
source to destination."
::= { hpicfIpSlaHistEntry 24}
hpicfIpSlaHistMaxStoDNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum negative jitter value recorded from
source to destination."
::= { hpicfIpSlaHistEntry 25}
hpicfIpSlaHistNumOfNegSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of negative jitter values recorded from
source to destination."
::= { hpicfIpSlaHistEntry 26}
hpicfIpSlaHistSumOfNegSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of negative jitter values recorded from
source to destination."
::= { hpicfIpSlaHistEntry 27}
hpicfIpSlaHistAvgStoDNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average negative jitter value recorded from
source to destination."
::= { hpicfIpSlaHistEntry 28}
hpicfIpSlaHistSum2NegativesSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of square of negative jitter values recorded
from source to destination."
::= { hpicfIpSlaHistEntry 29}
hpicfIpSlaHistMinDtoSNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimal negative jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 30}
hpicfIpSlaHistMaxDtoSNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum negative jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 31}
hpicfIpSlaHistNumOfNegDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of negative jitter values recorded from
destination to source."
::= { hpicfIpSlaHistEntry 32}
hpicfIpSlaHistSumOfNegDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The negative jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 33}
hpicfIpSlaHistAvgDtoSNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average negative jitter value recorded from
destination to source."
::= { hpicfIpSlaHistEntry 34}
hpicfIpSlaHistSum2NegativesDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The negative jitter value recorded from
source to destination."
::= { hpicfIpSlaHistEntry 35}
hpicfIpSlaHistMinStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum delay recorded from
source to destination."
::= { hpicfIpSlaHistEntry 36}
hpicfIpSlaHistMaxStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum delay recorded from
source to destination."
::= { hpicfIpSlaHistEntry 37}
hpicfIpSlaHistSumStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of all delays recorded from
source to destination."
::= { hpicfIpSlaHistEntry 38}
hpicfIpSlaHistNumOfDelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of delays from source to destination that are
successfully measured."
::= { hpicfIpSlaHistEntry 39}
hpicfIpSlaHistSum2DelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of squares of all delays recorded from
source to destination."
::= { hpicfIpSlaHistEntry 40}
hpicfIpSlaHistMinDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum delay recorded from destination to source."
::= { hpicfIpSlaHistEntry 41}
hpicfIpSlaHistMaxDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum delay recorded from destination to source."
::= { hpicfIpSlaHistEntry 42}
hpicfIpSlaHistNumOfDelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of delays from destination to source that are
successfully measured."
::= { hpicfIpSlaHistEntry 43}
hpicfIpSlaHistSumDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of all delays recorded from destination to source."
::= { hpicfIpSlaHistEntry 44}
hpicfIpSlaHistSum2DelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of squares of all delays recorded from
destination to source."
::= { hpicfIpSlaHistEntry 45}
hpicfIpSlaHistICPIF OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Calculated Planning Impairment Factor (ICPIF) value
for the type-specified test."
::= { hpicfIpSlaHistEntry 46}
hpicfIpSlaHistMOS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Mean Opinion Score (MOS) value for the type-specified test.
The Value of this object is 100 times of the actual value."
::= { hpicfIpSlaHistEntry 47}
hpicfIpSlaHistAvgStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average one-way time from source to destination."
::= { hpicfIpSlaHistEntry 48}
hpicfIpSlaHistAvgDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average one-way time from destination to source."
::= { hpicfIpSlaHistEntry 49}
--
-- IP SLA history summary Table
--
hpicfIpSlaHistSummTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaHistSummEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies the history summary of IP SLA result."
::= { hpicfIpSlaObjects 7 }
hpicfIpSlaHistSummEntry OBJECT-TYPE
SYNTAX HpicfIpSlaHistSummEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the minimum, maximum
and the average time taken from source to destination
and vice versa."
INDEX {
hpicfIpSlaID,
hpicfIpSlaHistSummIndx
}
::= { hpicfIpSlaHistSummTable 1 }
HpicfIpSlaHistSummEntry ::= SEQUENCE
{
hpicfIpSlaHistSummIndx Integer32,
hpicfIpSlaHistSummStartTime Unsigned32,
hpicfIpSlaHistSummStatus Unsigned32,
hpicfIpSlaHistSummRTT Unsigned32,
hpicfIpSlaHistSummResolvdIP Unsigned32,
hpicfIpSlaHistSummDescription Unsigned32,
hpicfIpSlaHistSummStoDDelay Unsigned32,
hpicfIpSlaHistSummDtoSDelay Unsigned32
}
hpicfIpSlaHistSummIndx OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is an index for history summary. Its value can vary
from 1 to 50."
::= { hpicfIpSlaHistSummEntry 1 }
hpicfIpSlaHistSummStartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time at which the type-specified test was executed."
::= { hpicfIpSlaHistSummEntry 2}
hpicfIpSlaHistSummStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the IP SLA test."
::= { hpicfIpSlaHistSummEntry 3}
hpicfIpSlaHistSummRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The round-trip time for a successfully measured test."
::= { hpicfIpSlaHistSummEntry 4}
hpicfIpSlaHistSummResolvdIP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resolved IP address."
::= { hpicfIpSlaHistSummEntry 5}
hpicfIpSlaHistSummDescription OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error description."
::= { hpicfIpSlaHistSummEntry 6}
hpicfIpSlaHistSummStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source to destination delay."
::= { hpicfIpSlaHistSummEntry 7}
hpicfIpSlaHistSummDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination to source delay."
::= { hpicfIpSlaHistSummEntry 8}
--
-- IP SLA history aggregate Table
--
hpicfIpSlaHistAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaHistAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies the aggregate value of IP SLA result.
The average value is calculating on last 25 probes.
Or the calculation will do on the number of probes
if the probe count is less than 25"
::= { hpicfIpSlaObjects 8 }
hpicfIpSlaHistAggrEntry OBJECT-TYPE
SYNTAX HpicfIpSlaHistAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies aggregate value of minimum,
maximum and the average time taken from source to destination
and vice versa."
INDEX { hpicfIpSlaID }
::= { hpicfIpSlaHistAggrTable 1 }
HpicfIpSlaHistAggrEntry ::= SEQUENCE
{
hpicfIpSlaHistAggrMinRTT Unsigned32,
hpicfIpSlaHistAggrMaxRTT Unsigned32,
hpicfIpSlaHistAggrNumOfRTT Unsigned32,
hpicfIpSlaHistAggrAvgRTT Unsigned32,
hpicfIpSlaHistAggrTotalRTT Unsigned32,
hpicfIpSlaHistAggrRTT2 Unsigned32,
hpicfIpSlaHistAggrFrstProbStTime Unsigned32,
hpicfIpSlaHistAggrProbFailReason Unsigned32,
hpicfIpSlaHistAggrPacketLoss Unsigned32,
hpicfIpSlaHistAggrSentPktNum Unsigned32,
hpicfIpSlaHistAggrRecvdPktNum Unsigned32,
hpicfIpSlaHistAggrMinStoDPostv Unsigned32,
hpicfIpSlaHistAggrMaxStoDPostv Unsigned32,
hpicfIpSlaHistAggrNumOfPosSD Unsigned32,
hpicfIpSlaHistAggrSumOfPosSD Unsigned32,
hpicfIpSlaHistAggrAvgStoDPostv Unsigned32,
hpicfIpSlaHistAggrSum2PostvSD Unsigned32,
hpicfIpSlaHistAggrMinDtoSPostv Unsigned32,
hpicfIpSlaHistAggrMaxDtoSPostv Unsigned32,
hpicfIpSlaHistAggrNumOfPosDS Unsigned32,
hpicfIpSlaHistAggrSumOfPosDS Unsigned32,
hpicfIpSlaHistAggrAvgDtoSPostv Unsigned32,
hpicfIpSlaHistAggrSum2PostvDS Unsigned32,
hpicfIpSlaHistAggrMinStoDNegtv Unsigned32,
hpicfIpSlaHistAggrMaxStoDNegtv Unsigned32,
hpicfIpSlaHistAggrNumOfNegSD Unsigned32,
hpicfIpSlaHistAggrSumOfNegSD Unsigned32,
hpicfIpSlaHistAggrAvgStoDNegtv Unsigned32,
hpicfIpSlaHistAggrSum2NegtvSD Unsigned32,
hpicfIpSlaHistAggrMinDtoSNegtv Unsigned32,
hpicfIpSlaHistAggrMaxDtoSNegtv Unsigned32,
hpicfIpSlaHistAggrNumOfNegDS Unsigned32,
hpicfIpSlaHistAggrSumOfNegDS Unsigned32,
hpicfIpSlaHistAggrAvgDtoSNegtv Unsigned32,
hpicfIpSlaHistAggrSum2NegtvDS Unsigned32,
hpicfIpSlaHistAggrMinStoDDelay Unsigned32,
hpicfIpSlaHistAggrMaxStoDDelay Unsigned32,
hpicfIpSlaHistAggrSumStoDDelay Unsigned32,
hpicfIpSlaHistAggrNumOfDelaySD Unsigned32,
hpicfIpSlaHistAggrSum2DelaySD Unsigned32,
hpicfIpSlaHistAggrMinDtoSDelay Unsigned32,
hpicfIpSlaHistAggrMaxDtoSDelay Unsigned32,
hpicfIpSlaHistAggrNumOfDelayDS Unsigned32,
hpicfIpSlaHistAggrSumDtoSDelay Unsigned32,
hpicfIpSlaHistAggrSum2DelayDS Unsigned32,
hpicfIpSlaHistAggrMinICPIF Unsigned32,
hpicfIpSlaHistAggrMaxICPIF Unsigned32,
hpicfIpSlaHistAggrMinMOS Unsigned32,
hpicfIpSlaHistAggrMaxMOS Unsigned32
}
hpicfIpSlaHistAggrMinRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum round-trip time for the last 25 probes."
::= { hpicfIpSlaHistAggrEntry 1}
hpicfIpSlaHistAggrMaxRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum round-trip time for the last 25 probes."
::= { hpicfIpSlaHistAggrEntry 2}
hpicfIpSlaHistAggrNumOfRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of RTTs that are successfully measured for
last 25 probes."
::= { hpicfIpSlaHistAggrEntry 3}
hpicfIpSlaHistAggrAvgRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average round-trip time of last 25 probes."
::= { hpicfIpSlaHistAggrEntry 4}
hpicfIpSlaHistAggrTotalRTT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total round-trip time of last 25 probes."
::= { hpicfIpSlaHistAggrEntry 5}
hpicfIpSlaHistAggrRTT2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average of the sum of squares of RTTs for
the last 25 probes."
::= { hpicfIpSlaHistAggrEntry 6}
hpicfIpSlaHistAggrFrstProbStTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "First probe start time."
::= { hpicfIpSlaHistAggrEntry 7}
hpicfIpSlaHistAggrProbFailReason OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Probe failure reason."
::= { hpicfIpSlaHistAggrEntry 8}
hpicfIpSlaHistAggrPacketLoss OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The percentage of packet loss in last 25 probes."
::= { hpicfIpSlaHistAggrEntry 9}
hpicfIpSlaHistAggrSentPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets sent."
::= { hpicfIpSlaHistAggrEntry 10}
hpicfIpSlaHistAggrRecvdPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets received."
::= { hpicfIpSlaHistAggrEntry 11}
hpicfIpSlaHistAggrMinStoDPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum positive jitter value from source to
destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 12}
hpicfIpSlaHistAggrMaxStoDPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum positive jitter value from source to
destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 13}
hpicfIpSlaHistAggrNumOfPosSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times source to destination jitter value
became positive."
::= { hpicfIpSlaHistAggrEntry 14}
hpicfIpSlaHistAggrSumOfPosSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average of the sum of positive jitter value from
source to destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 15}
hpicfIpSlaHistAggrAvgStoDPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average of the positive jitter value from source to
destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 16}
hpicfIpSlaHistAggrSum2PostvSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The aggregate of square sum of positive jitter value
from source to destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 17}
hpicfIpSlaHistAggrMinDtoSPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum positive jitter value from destination
to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 18}
hpicfIpSlaHistAggrMaxDtoSPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum positive jitter value from destination
to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 19}
hpicfIpSlaHistAggrNumOfPosDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times destination to source
jitter was positive."
::= { hpicfIpSlaHistAggrEntry 20}
hpicfIpSlaHistAggrSumOfPosDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of positive jitter value from destination
to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 21}
hpicfIpSlaHistAggrAvgDtoSPostv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of average positive jitter values from
destination to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 22}
hpicfIpSlaHistAggrSum2PostvDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The aggregate of square sum of positive jitter value
from destination to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 23}
hpicfIpSlaHistAggrMinStoDNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum negative jitter value from source to
destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 24}
hpicfIpSlaHistAggrMaxStoDNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum negative jitter value from source to
destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 25}
hpicfIpSlaHistAggrNumOfNegSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times jitter value from source to
destination became negative."
::= { hpicfIpSlaHistAggrEntry 26}
hpicfIpSlaHistAggrSumOfNegSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of negative jitter value from source to
destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 27}
hpicfIpSlaHistAggrAvgStoDNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average of the negative jitter value from source
to destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 28}
hpicfIpSlaHistAggrSum2NegtvSD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The aggregate of square sum of negative jitter value
from source to destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 29}
hpicfIpSlaHistAggrMinDtoSNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum negative jitter value from destination to
source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 30}
hpicfIpSlaHistAggrMaxDtoSNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum negative jitter value from destination
to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 31}
hpicfIpSlaHistAggrNumOfNegDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times jitter value from destination
to source became negative."
::= { hpicfIpSlaHistAggrEntry 32}
hpicfIpSlaHistAggrSumOfNegDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of negative jitter value from destination
to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 33}
hpicfIpSlaHistAggrAvgDtoSNegtv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The average of the negative jitter value from
destination to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 34}
hpicfIpSlaHistAggrSum2NegtvDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The aggregate of square sum of negative jitter value
from destination to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 35}
hpicfIpSlaHistAggrMinStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum one-way time from source to destination
for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 36}
hpicfIpSlaHistAggrMaxStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum one-way time from source to destination
for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 37}
hpicfIpSlaHistAggrSumStoDDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of one-way time from source to destination
for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 38}
hpicfIpSlaHistAggrNumOfDelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times source to destination delay occurred
for the last 25 probes."
::= { hpicfIpSlaHistAggrEntry 39}
hpicfIpSlaHistAggrSum2DelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of squares of one-way delay from source
to destination for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 40}
hpicfIpSlaHistAggrMinDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum one-way delay from destination to source
for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 41}
hpicfIpSlaHistAggrMaxDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum one-way delay from destination to source
for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 42}
hpicfIpSlaHistAggrNumOfDelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times destination to source delay occurred
for the last 25 probes."
::= { hpicfIpSlaHistAggrEntry 43}
hpicfIpSlaHistAggrSumDtoSDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of one-way delay from destination to source for
last 25 probes."
::= { hpicfIpSlaHistAggrEntry 44}
hpicfIpSlaHistAggrSum2DelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sum of squares of one-way delay from destination
to source for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 45}
hpicfIpSlaHistAggrMinICPIF OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum ICPIF value for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 46}
hpicfIpSlaHistAggrMaxICPIF OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum ICPIF value for last 25 probes."
::= { hpicfIpSlaHistAggrEntry 47}
hpicfIpSlaHistAggrMinMOS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum MOS value for last 25 probes.
The Value of this object is 100 times of the actual value."
::= { hpicfIpSlaHistAggrEntry 48}
hpicfIpSlaHistAggrMaxMOS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum MOS value for last 25 probes.
The Value of this object is 100 times of the actual value."
::= { hpicfIpSlaHistAggrEntry 49}
--
-- IP SLA responder result Table
--
hpicfIpSlaRespResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaRespResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies the IP SLA responder result parameters as
entries."
::= { hpicfIpSlaObjects 9 }
hpicfIpSlaRespResultEntry OBJECT-TYPE
SYNTAX HpicfIpSlaRespResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies responder status and
number of packets received and responded."
INDEX
{
hpicfIpSlaJitterRespType,
hpicfIpSlaJitterRespAddress,
hpicfIpSlaJitterRespL4Port,
hpicfIpSlaJitterRespSrcAddress
}
::= { hpicfIpSlaRespResultTable 1 }
HpicfIpSlaRespResultEntry ::= SEQUENCE
{
hpicfIpSlaRespStatus Unsigned32,
hpicfIpSlaRespnumPktRcvd Unsigned32,
hpicfIpSlaRespNumPktRespnd Unsigned32
}
hpicfIpSlaRespStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the responder."
::= { hpicfIpSlaRespResultEntry 1}
hpicfIpSlaRespnumPktRcvd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets received by the responder."
::= { hpicfIpSlaRespResultEntry 2}
hpicfIpSlaRespNumPktRespnd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets sent by the responder."
::= { hpicfIpSlaRespResultEntry 3}
--
-- IP SLA Responder objects for jitter
--
hpicfIpSlaJitterRespTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfIpSlaJitterRespEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table specifies IP SLA jitter responder parameters
as entries."
::= { hpicfIpSlaObjects 10 }
hpicfIpSlaJitterRespEntry OBJECT-TYPE
SYNTAX HpicfIpSlaJitterRespEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry on this table specifies the local IP address,
port number and row status corresponding to each SLA
responder config."
INDEX
{
hpicfIpSlaJitterRespType,
hpicfIpSlaJitterRespAddress,
hpicfIpSlaJitterRespL4Port,
hpicfIpSlaJitterRespSrcAddress
}
::= { hpicfIpSlaJitterRespTable 1 }
HpicfIpSlaJitterRespEntry ::= SEQUENCE
{
hpicfIpSlaJitterRespType INTEGER,
hpicfIpSlaJitterRespAddressType InetAddressType,
hpicfIpSlaJitterRespAddress InetAddress,
hpicfIpSlaJitterRespL4Port InetPortNumber,
hpicfIpSlaJitterRespSrcAddrType InetAddressType,
hpicfIpSlaJitterRespSrcAddress InetAddress,
hpicfIpSlaJitterRespRowStatus RowStatus
}
hpicfIpSlaJitterRespType OBJECT-TYPE
SYNTAX INTEGER
{
udpJitter(2),
udpJitterVoIP(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The SLA jitter responder type. The udpJitter and
udpJitterVoIP values calculate one-way delay, therefore
a timestamp has to be embedded while replying back.
This is one of the indexes for hpicfIpSlaJitterRespTable."
::= { hpicfIpSlaJitterRespEntry 1 }
hpicfIpSlaJitterRespAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA jitter responder IP address type."
::= { hpicfIpSlaJitterRespEntry 2 }
hpicfIpSlaJitterRespAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The local IP address to which the responder is bound.
This is one of the indexes for hpicfIpSlaJitterRespTable."
::= { hpicfIpSlaJitterRespEntry 3 }
hpicfIpSlaJitterRespL4Port OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "L4 port number on hpicfIpSlaJitterRespAddress where the
responder listens for probe packets from SLA source.
This is one of the indexes for hpicfIpSlaJitterRespTable.
The allowed range is 1024 to 65535."
::= { hpicfIpSlaJitterRespEntry 4 }
hpicfIpSlaJitterRespSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA jitter responder source IP address type."
::= { hpicfIpSlaJitterRespEntry 5 }
hpicfIpSlaJitterRespSrcAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source IP address to which the responder is responding."
::= { hpicfIpSlaJitterRespEntry 6 }
hpicfIpSlaJitterRespRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SLA jitter responder row status."
::= { hpicfIpSlaJitterRespEntry 7}
--*************************************************************
--* hpicfIpSlaNotifications
--*************************************************************
hpicfIpSlaThresholdexceeded NOTIFICATION-TYPE
OBJECTS
{
hpicfIpSlaThrUpper
}
STATUS current
DESCRIPTION "This notification is generated when the metric calculated
from the SLA result exceeds the configured threshold value.
The hpicfIpSlaThrUpper is not applicable when
hpicfIpSlaThrMetricType is set to packetLoss or
testCompletion."
::= { hpicfIpSlaNotifications 1 }
hpicfIpSlaTestCompletion NOTIFICATION-TYPE
OBJECTS
{
hpicfIpSlaThrType
}
STATUS current
DESCRIPTION "This notification is generated when the SLA test is
completed either by reaching stopTime or
hpicfIpSlaAttrNumPkts. This notification is sent only
when the action type is set to trap or trap-log."
::= { hpicfIpSlaNotifications 2 }
hpicfIpSlaThresholdPktLoss NOTIFICATION-TYPE
OBJECTS
{
hpicfIpSlaThrCount
}
STATUS current
DESCRIPTION "This notification is generated when SLA test probe reply
packets are lost consecutively for the configured number
of hpicfIpSlaThrCount. This notification is sent only when
the action type is set to trap or trap-log."
::= { hpicfIpSlaNotifications 3 }
------------------------------------------------------------------------------
-- Conformance Information
------------------------------------------------------------------------------
hpicfIpSlaGroups OBJECT IDENTIFIER ::= { hpicfIpSlaConformance 1 }
hpicfIpSlaCompliances OBJECT IDENTIFIER ::= { hpicfIpSlaConformance 2 }
-- compliance statements
hpicfIpSlaCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "The compliance statement for HP switches that support IP SLA."
MODULE -- this module
MANDATORY-GROUPS
{
hpicfIpSlaGroup,
hpicfIpSlaAttrGroup,
hpicfIpSlaThrGroup,
hpicfIpSlaRespGroup,
hpicfIpSlaNotificationsGroup
}
::= { hpicfIpSlaCompliances 1 }
hpicfIpSlaCompliance1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for HP switches that support IP SLA."
MODULE -- this module
MANDATORY-GROUPS
{
hpicfIpSlaGroup,
hpicfIpSlaAttrGroup1,
hpicfIpSlaThrGroup,
hpicfIpSlaRespGroup,
hpicfIpSlaNotificationsGroup,
hpicfIpSlaMsgGroup,
hpicfIpSlaHistGroup,
hpicfIpSlaHistSummGroup,
hpicfIpSlaHistAggrGroup,
hpicfIpSlaRespResultGroup,
hpicfIpSlaJitterRespGroup
}
::= { hpicfIpSlaCompliances 2 }
-- MIB Groupings
hpicfIpSlaGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaType,
hpicfIpSlaAdminState,
hpicfIpSlaSourceAddressType,
hpicfIpSlaSourceAddress,
hpicfIpSlaL4SourcePort,
hpicfIpSlaSourceInterface,
hpicfIpSlaDestAddressType,
hpicfIpSlaDestAddress,
hpicfIpSlaL4DestPort,
hpicfIpSlaRowStatus
}
STATUS current
DESCRIPTION "A mandatory group with a set of IP SLA objects."
::= { hpicfIpSlaGroups 1 }
hpicfIpSlaAttrGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaSchedStartTime,
hpicfIpSlaSchedEndTime,
hpicfIpSlaSchedFreq,
hpicfIpSlaSchedRepeat,
hpicfIpSlaAttrTOS,
hpicfIpSlaAttrHistorySize,
hpicfIpSlaAttrPayloadSize,
hpicfIpSlaAttrNumPkts,
hpicfIpSlaAttrPktInterval,
hpicfIpSlaAttrRowStatus
}
STATUS deprecated
DESCRIPTION "A group with a set of IP SLA attribute objects."
::= { hpicfIpSlaGroups 2 }
hpicfIpSlaThrGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaThrUpper,
hpicfIpSlaThrLower,
hpicfIpSlaThrType,
hpicfIpSlaThrCount,
hpicfIpSlaThrAction,
hpicfIpSlaThrRowStatus
}
STATUS current
DESCRIPTION "A group with a set of IP SLA threshold objects."
::= { hpicfIpSlaGroups 3 }
hpicfIpSlaRespGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaRespAddressType,
hpicfIpSlaRespRowStatus
}
STATUS current
DESCRIPTION "A group with a set of IP SLA responder objects."
::= { hpicfIpSlaGroups 4 }
hpicfIpSlaNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
hpicfIpSlaThresholdexceeded,
hpicfIpSlaTestCompletion,
hpicfIpSlaThresholdPktLoss
}
STATUS current
DESCRIPTION "A collection of IP SLA source and responder notifications
objects."
::= { hpicfIpSlaGroups 5 }
hpicfIpSlaMsgGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaMsgLastProbeRcvd,
hpicfIpSlaMsgLastClrRec,
hpicfIpSlaMsgSuccProbe,
hpicfIpSlaMsgIntErr,
hpicfIpSlaMsgLocIntfDown,
hpicfIpSlaMsgResTimeout,
hpicfIpSlaMsgDNSFormatErr,
hpicfIpSlaMsgServerFaild,
hpicfIpSlaMsgDomainNotExist,
hpicfIpSlaMsgFunctnNotImpl,
hpicfIpSlaMsgServerRefusd,
hpicfIpSlaMsgNameNotExist,
hpicfIpSlaMsgRRsetNotExist,
hpicfIpSlaMsgServerNotInZone,
hpicfIpSlaMsgNameNotInZone,
hpicfIpSlaMsgDHCPFaildResln,
hpicfIpSlaMsgOffrNotRecvd,
hpicfIpSlaMsgNACKRecvd,
hpicfIpSlaMsgThrHitRTT,
hpicfIpSlaMsgStatus,
hpicfIpSlaMsgNxtSched,
hpicfIpSlaMsgThrHitPostvSDAvg,
hpicfIpSlaMsgThrHitPostvDSAvg,
hpicfIpSlaMsgThrHitOneWayDSAvg,
hpicfIpSlaMsgThrHitOneWaySDAvg,
hpicfIpSlaMsgThrHitAvgICPIF,
hpicfIpSlaMsgThrHitAvgMOS,
hpicfIpSlaMsgNameServUnreach,
hpicfIpSlaMsgDHCPReleaseErr,
hpicfIpSlaMsgThrHitPktLoss,
hpicfIpSlaMsgDstUnreach,
hpicfIpSlaMsgProbeSkpd,
hpicfIpSlaMsgDNSResolnFailed,
hpicfIpSlaMsgNoRoutetoTgt,
hpicfIpSlaMsgUnbleToConctHost,
hpicfIpSlaMsgSuccConnection,
hpicfIpSlaMsgPossTrailDropped,
hpicfIpSlaMsgNoRespFrmTgt,
hpicfIpSlaMsgProbeRespRecvd
}
STATUS current
DESCRIPTION "A mandatory group with a set of IP SLA result objects."
::= { hpicfIpSlaGroups 6 }
hpicfIpSlaHistGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaHistMinRTT,
hpicfIpSlaHistMaxRTT,
hpicfIpSlaHistAvgRTT,
hpicfIpSlaHistTotalRTT,
hpicfIpSlaHistRTT2,
hpicfIpSlaHistNumOfRTT,
hpicfIpSlaHistProbID,
hpicfIpSlaHistLastSuccProbTime,
hpicfIpSlaHistPacketLoss,
hpicfIpSlaHistSentPktNum,
hpicfIpSlaHistRecvdPktNum,
hpicfIpSlaHistMinStoDPostv,
hpicfIpSlaHistMaxStoDPostv,
hpicfIpSlaHistNumOfPosSD,
hpicfIpSlaHistSumOfPosSD,
hpicfIpSlaHistAvgStoDPostv,
hpicfIpSlaHistSum2PositivesSD,
hpicfIpSlaHistMinDtoSPostv,
hpicfIpSlaHistMaxDtoSPostv,
hpicfIpSlaHistNumOfPosDS,
hpicfIpSlaHistSumOfPosDS,
hpicfIpSlaHistAvgDtoSPostv,
hpicfIpSlaHistSum2PositivesDS,
hpicfIpSlaHistMinStoDNegtv,
hpicfIpSlaHistMaxStoDNegtv,
hpicfIpSlaHistNumOfNegSD,
hpicfIpSlaHistSumOfNegSD,
hpicfIpSlaHistAvgStoDNegtv,
hpicfIpSlaHistSum2NegativesSD,
hpicfIpSlaHistMinDtoSNegtv,
hpicfIpSlaHistMaxDtoSNegtv,
hpicfIpSlaHistNumOfNegDS,
hpicfIpSlaHistSumOfNegDS,
hpicfIpSlaHistAvgDtoSNegtv,
hpicfIpSlaHistSum2NegativesDS,
hpicfIpSlaHistMinStoDDelay,
hpicfIpSlaHistMaxStoDDelay,
hpicfIpSlaHistSumStoDDelay,
hpicfIpSlaHistNumOfDelaySD,
hpicfIpSlaHistSum2DelaySD,
hpicfIpSlaHistMinDtoSDelay,
hpicfIpSlaHistMaxDtoSDelay,
hpicfIpSlaHistNumOfDelayDS,
hpicfIpSlaHistSumDtoSDelay,
hpicfIpSlaHistSum2DelayDS,
hpicfIpSlaHistICPIF,
hpicfIpSlaHistMOS,
hpicfIpSlaHistAvgStoDDelay,
hpicfIpSlaHistAvgDtoSDelay
}
STATUS current
DESCRIPTION "A mandatory group with a set of IP SLA history objects."
::= { hpicfIpSlaGroups 7 }
hpicfIpSlaHistSummGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaHistSummStartTime,
hpicfIpSlaHistSummStatus,
hpicfIpSlaHistSummRTT,
hpicfIpSlaHistSummResolvdIP,
hpicfIpSlaHistSummDescription,
hpicfIpSlaHistSummStoDDelay,
hpicfIpSlaHistSummDtoSDelay
}
STATUS current
DESCRIPTION "A mandatory group with a set of IP SLA history
summary objects."
::= { hpicfIpSlaGroups 8 }
hpicfIpSlaAttrGroup1 OBJECT-GROUP
OBJECTS
{
hpicfIpSlaSchedStartTime,
hpicfIpSlaSchedEndTime,
hpicfIpSlaSchedFreq,
hpicfIpSlaSchedRepeat,
hpicfIpSlaAttrTOS,
hpicfIpSlaAttrHistorySize,
hpicfIpSlaAttrPayloadSize,
hpicfIpSlaAttrNumPkts,
hpicfIpSlaAttrPktInterval,
hpicfIpSlaAttrRowStatus,
hpicfIpSlaAttrCodecType,
hpicfIpSlaAttrAdvntgFactr
}
STATUS current
DESCRIPTION "A group with a set of IP SLA attribute objects."
::= { hpicfIpSlaGroups 9 }
hpicfIpSlaHistAggrGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaHistAggrMinRTT,
hpicfIpSlaHistAggrMaxRTT,
hpicfIpSlaHistAggrNumOfRTT,
hpicfIpSlaHistAggrAvgRTT,
hpicfIpSlaHistAggrTotalRTT,
hpicfIpSlaHistAggrRTT2,
hpicfIpSlaHistAggrFrstProbStTime,
hpicfIpSlaHistAggrProbFailReason,
hpicfIpSlaHistAggrPacketLoss,
hpicfIpSlaHistAggrSentPktNum,
hpicfIpSlaHistAggrRecvdPktNum,
hpicfIpSlaHistAggrMinStoDPostv,
hpicfIpSlaHistAggrMaxStoDPostv,
hpicfIpSlaHistAggrNumOfPosSD,
hpicfIpSlaHistAggrSumOfPosSD,
hpicfIpSlaHistAggrAvgStoDPostv,
hpicfIpSlaHistAggrSum2PostvSD,
hpicfIpSlaHistAggrMinDtoSPostv,
hpicfIpSlaHistAggrMaxDtoSPostv,
hpicfIpSlaHistAggrNumOfPosDS,
hpicfIpSlaHistAggrSumOfPosDS,
hpicfIpSlaHistAggrAvgDtoSPostv,
hpicfIpSlaHistAggrSum2PostvDS,
hpicfIpSlaHistAggrMinStoDNegtv,
hpicfIpSlaHistAggrMaxStoDNegtv,
hpicfIpSlaHistAggrNumOfNegSD,
hpicfIpSlaHistAggrSumOfNegSD,
hpicfIpSlaHistAggrAvgStoDNegtv,
hpicfIpSlaHistAggrSum2NegtvSD,
hpicfIpSlaHistAggrMinDtoSNegtv,
hpicfIpSlaHistAggrMaxDtoSNegtv,
hpicfIpSlaHistAggrNumOfNegDS,
hpicfIpSlaHistAggrSumOfNegDS,
hpicfIpSlaHistAggrAvgDtoSNegtv,
hpicfIpSlaHistAggrSum2NegtvDS,
hpicfIpSlaHistAggrMinStoDDelay,
hpicfIpSlaHistAggrMaxStoDDelay,
hpicfIpSlaHistAggrSumStoDDelay,
hpicfIpSlaHistAggrNumOfDelaySD,
hpicfIpSlaHistAggrSum2DelaySD,
hpicfIpSlaHistAggrMinDtoSDelay,
hpicfIpSlaHistAggrMaxDtoSDelay,
hpicfIpSlaHistAggrNumOfDelayDS,
hpicfIpSlaHistAggrSumDtoSDelay,
hpicfIpSlaHistAggrSum2DelayDS,
hpicfIpSlaHistAggrMinICPIF,
hpicfIpSlaHistAggrMaxICPIF,
hpicfIpSlaHistAggrMinMOS,
hpicfIpSlaHistAggrMaxMOS
}
STATUS current
DESCRIPTION "A mandatory group with a set of IP SLA aggregate result
summary objects."
::= { hpicfIpSlaGroups 10 }
hpicfIpSlaRespResultGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaRespStatus,
hpicfIpSlaRespnumPktRcvd,
hpicfIpSlaRespNumPktRespnd
}
STATUS current
DESCRIPTION "A mandatory group with a set of IP SLA responder objects."
::= { hpicfIpSlaGroups 11 }
hpicfIpSlaJitterRespGroup OBJECT-GROUP
OBJECTS
{
hpicfIpSlaJitterRespAddressType,
hpicfIpSlaJitterRespSrcAddrType,
hpicfIpSlaJitterRespRowStatus
}
STATUS current
DESCRIPTION "A group with a set of IP SLA jitter responder objects."
::= { hpicfIpSlaGroups 12 }
END
View Git Blame Copy Permalink