Observium_CE/mibs/hp/HP-LOADBALANCE-MIB

561 lines
18 KiB
Plaintext

HP-LOADBALANCE-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, Counter64, Integer32, Unsigned32
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
RowStatus, MacAddress
FROM SNMPv2-TC
InterfaceIndex, ifIndex
FROM IF-MIB
hpSwitch
FROM HP-ICF-OID
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
hpicfLoadBalanceMod MODULE-IDENTITY
LAST-UPDATED "201103222222Z" -- March 22, 2011
ORGANIZATION "HP Networking"
CONTACT-INFO "Hewlett-Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "MIB module for configuring trunk Load Balancing
on Hewlett-Packard network devices."
REVISION "201103222222Z" -- March 22, 2011
DESCRIPTION "Added a table to get the current egress port in the trunk."
REVISION "201006222222Z" -- June 22, 2010
DESCRIPTION "Initial version of this MIB module."
::= { hpSwitch 76 }
hpicfLoadBalanceNotifications OBJECT IDENTIFIER ::= { hpicfLoadBalanceMod 0 }
hpicfLoadBalanceMethodMod OBJECT IDENTIFIER ::= { hpicfLoadBalanceMod 1 }
hpicfLoadBalanceConformance OBJECT IDENTIFIER ::= { hpicfLoadBalanceMod 2 }
-- ----------------------------------------------------------------------
-- Global Load Balancing method
-- ----------------------------------------------------------------------
hpicfTrunkLoadBalanceMethod OBJECT-TYPE
SYNTAX INTEGER {
l3based(1),
l4based(2),
l2based(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Method to be used for Load Balancing."
::= { hpicfLoadBalanceMethodMod 1 }
hpicfTrunkClearStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfTrunkClearStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for resetting the statistics for the given trunk."
::= { hpicfLoadBalanceMethodMod 2 }
hpicfTrunkClearStatsEntry OBJECT-TYPE
SYNTAX HpicfTrunkClearStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry is used to clear the statistics for the given trunk."
INDEX { hpicfTrunkId }
::= { hpicfTrunkClearStatsTable 1 }
HpicfTrunkClearStatsEntry ::= SEQUENCE {
hpicfTrunkId Integer32,
hpicfTrunkStatsClear TruthValue
}
hpicfTrunkId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the entry in this table."
::= { hpicfTrunkClearStatsEntry 1 }
hpicfTrunkStatsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to clear the statistics for the trunk
identified by 'hpicfTrunkId'. Statistics counters will be
cleared when this object is set to 'true'.
This object will always returns 'false'."
::= { hpicfTrunkClearStatsEntry 2 }
hpicfTrunkStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfTrunkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics for the specified trunk."
::= { hpicfLoadBalanceMethodMod 3 }
hpicfTrunkStatsEntry OBJECT-TYPE
SYNTAX HpicfTrunkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics for the specified trunk."
INDEX { hpicfTrunkId }
::= { hpicfTrunkStatsTable 1 }
HpicfTrunkStatsEntry ::= SEQUENCE {
hpicfTrunkUpTime Unsigned32,
hpicfTrunkTotalBytesRx Counter64,
hpicfTrunkTotalBytesTx Counter64,
hpicfTrunkTotalFramesRx Counter64,
hpicfTrunkTotalFramesTx Counter64,
hpicfTrunkTotalDropsTx Counter64
}
hpicfTrunkUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time the trunk has been up or since the
counters were reset."
::= { hpicfTrunkStatsEntry 1 }
hpicfTrunkTotalBytesRx OBJECT-TYPE
SYNTAX Counter64
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes received on this trunk."
::= { hpicfTrunkStatsEntry 2 }
hpicfTrunkTotalBytesTx OBJECT-TYPE
SYNTAX Counter64
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes transmitted on this trunk."
::= { hpicfTrunkStatsEntry 3 }
hpicfTrunkTotalFramesRx OBJECT-TYPE
SYNTAX Counter64
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of frames received on this trunk."
::= { hpicfTrunkStatsEntry 4 }
hpicfTrunkTotalFramesTx OBJECT-TYPE
SYNTAX Counter64
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of frames transmitted on this trunk."
::= { hpicfTrunkStatsEntry 5 }
hpicfTrunkTotalDropsTx OBJECT-TYPE
SYNTAX Counter64
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of transmitted frames which were dropped
because the port was oversubscribed."
::= { hpicfTrunkStatsEntry 6 }
hpicfTrunkPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfTrunkPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics for specified port of the trunk."
::= { hpicfLoadBalanceMethodMod 4 }
hpicfTrunkPortStatsEntry OBJECT-TYPE
SYNTAX HpicfTrunkPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics for specified port of the trunk."
INDEX { hpicfTrunkId, ifIndex }
::= { hpicfTrunkPortStatsTable 1 }
HpicfTrunkPortStatsEntry ::= SEQUENCE {
hpicfTrunkPortBytesRx Counter64,
hpicfTrunkPortBytesTx Counter64,
hpicfTrunkPortFramesRx Counter64,
hpicfTrunkPortFramesTx Counter64,
hpicfTrunkPortFramesDropTx Counter64,
hpicfTrunkPortRxFramePercent Unsigned32,
hpicfTrunkPortTxFramePercent Unsigned32,
hpicfTrunkPortDropTxFramePercent Unsigned32
}
hpicfTrunkPortBytesRx OBJECT-TYPE
SYNTAX Counter64
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes received on the specified
port of the trunk."
::= { hpicfTrunkPortStatsEntry 1 }
hpicfTrunkPortBytesTx OBJECT-TYPE
SYNTAX Counter64
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes transmitted on the specified
port of the trunk."
::= { hpicfTrunkPortStatsEntry 2 }
hpicfTrunkPortFramesRx OBJECT-TYPE
SYNTAX Counter64
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of frames received on the specified
port of the trunk."
::= { hpicfTrunkPortStatsEntry 3 }
hpicfTrunkPortFramesTx OBJECT-TYPE
SYNTAX Counter64
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of frames transmitted on the specified
port of the trunk."
::= { hpicfTrunkPortStatsEntry 4 }
hpicfTrunkPortFramesDropTx OBJECT-TYPE
SYNTAX Counter64
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of transmitted frames which were dropped
on the specified port of the trunk because of
oversubscription."
::= { hpicfTrunkPortStatsEntry 5 }
hpicfTrunkPortRxFramePercent OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of frames received by this specified port of the
trunk, calculated as the total number of frames received by
this port over the total
number of frames received by all ports in the trunk group"
::= { hpicfTrunkPortStatsEntry 6 }
hpicfTrunkPortTxFramePercent OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of frames transmitted by this specified port of
the trunk, calculated as the total number of frames
transmitted by this port over the total
number of frames transmitted by all ports in the trunk group"
::= { hpicfTrunkPortStatsEntry 7 }
hpicfTrunkPortDropTxFramePercent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of frames transmitted by this port that are
dropped because of oversubscription, calculated as the total
number of dropped frames in transmission over the total number
of frames transmitted by the specified port of the trunk."
::= { hpicfTrunkPortStatsEntry 8 }
hpicfLoadBalanceObjects OBJECT IDENTIFIER ::= { hpicfLoadBalanceMethodMod 5}
--
-- Load balancing Table
--
hpicfLoadBalanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfLoadBalanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table which gives the current egress port in the trunk
for the specific conversation."
::= { hpicfLoadBalanceObjects 1}
hpicfLoadBalanceEntry OBJECT-TYPE
SYNTAX HpicfLoadBalanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "gives the current egress port in the trunk
for the specific conversation."
INDEX {hpicfLoadBalanceIndex}
::= { hpicfLoadBalanceTable 1}
HpicfLoadBalanceEntry ::=
SEQUENCE {
hpicfLoadBalanceIndex Integer32,
hpicfLoadBalanceTrunkId InterfaceIndex,
hpicfLoadBalanceSourceMacAddr MacAddress,
hpicfLoadBalanceDestMacAddr MacAddress,
hpicfLoadBalanceIPSourceAddrType InetAddressType,
hpicfLoadBalanceIPSourceAddr InetAddress,
hpicfLoadBalanceIPDestAddrType InetAddressType,
hpicfLoadBalanceIPDestAddr InetAddress,
hpicfLoadBalanceSourcePort Integer32,
hpicfLoadBalanceDestPort Integer32,
hpicfLoadBalanceEtherType Integer32,
hpicfLoadBalanceInboundVlan Integer32,
hpicfLoadBalanceInboundPort InterfaceIndex,
hpicfLoadBalanceOutboundPort InterfaceIndex,
hpicfLoadBalanceStatus RowStatus
}
hpicfLoadBalanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index which uniquely identifies a row in the table."
::= { hpicfLoadBalanceEntry 1}
hpicfLoadBalanceTrunkId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the trunk index."
::= { hpicfLoadBalanceEntry 2}
hpicfLoadBalanceSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source Mac address."
::= { hpicfLoadBalanceEntry 3}
hpicfLoadBalanceDestMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the destination Mac address"
::= { hpicfLoadBalanceEntry 4}
hpicfLoadBalanceIPSourceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source IP address type."
::= { hpicfLoadBalanceEntry 5}
hpicfLoadBalanceIPSourceAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source IP address."
::= { hpicfLoadBalanceEntry 6}
hpicfLoadBalanceIPDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the destination IP address type."
::= { hpicfLoadBalanceEntry 7 }
hpicfLoadBalanceIPDestAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the destination IP address."
::= { hpicfLoadBalanceEntry 8}
hpicfLoadBalanceSourcePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the TCP/UDP source port."
::= { hpicfLoadBalanceEntry 9}
hpicfLoadBalanceDestPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the TCP/UDP destination port."
::= { hpicfLoadBalanceEntry 10}
hpicfLoadBalanceEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the ether-type of the packet."
::= { hpicfLoadBalanceEntry 11}
hpicfLoadBalanceInboundVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the inbound VLAN of the packet."
::= { hpicfLoadBalanceEntry 12}
hpicfLoadBalanceInboundPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the inbound port of the packet."
::= { hpicfLoadBalanceEntry 13}
hpicfLoadBalanceOutboundPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the port on which the specified stream
with given source and destination information will be
forwarded out."
::= { hpicfLoadBalanceEntry 14}
hpicfLoadBalanceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the load balance entry."
::= { hpicfLoadBalanceEntry 15 }
-- -------------------------------------------------------------
-- ----------------Compliance Statement----------------------
-- ------------------------------------------------------------
hpicfLoadBalanceCompliances
OBJECT IDENTIFIER ::= { hpicfLoadBalanceConformance 1 }
hpicfLoadBalanceGroups
OBJECT IDENTIFIER ::= { hpicfLoadBalanceConformance 2 }
hpicfLoadBalanceCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for devices implementing
the hpicfLoadBalanceMethodMod MIB."
MODULE
GROUP hpicfLoadBalanceGroup
DESCRIPTION "Implementation of this group is mandatory for
devices that implement load balancing."
GROUP hpicfLoadBalanceGroup5
DESCRIPTION "This group is to get the egress port
of the trunk for a given flow."
::= { hpicfLoadBalanceCompliances 1 }
hpicfTrunkStatsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for devices implementing
the statistics of the trunk and trunk port."
MODULE
GROUP hpicfTrunkStatsClearGroup
DESCRIPTION "This group is to clear the trunk statistics"
GROUP hpicfTrunkStatsGroup
DESCRIPTION "This group is to get the trunk statistics."
GROUP hpicfTrunkPortStatsGroup
DESCRIPTION "This group is to get the statistics of the
port of the trunk."
::= { hpicfLoadBalanceCompliances 2 }
hpicfLoadBalanceGroup OBJECT-GROUP
OBJECTS { hpicfTrunkLoadBalanceMethod }
STATUS current
DESCRIPTION "A collection of objects for selecting a load
balancing method to use."
::= { hpicfLoadBalanceGroups 1 }
hpicfTrunkStatsClearGroup OBJECT-GROUP
OBJECTS {
hpicfTrunkStatsClear
}
STATUS current
DESCRIPTION "A collection of objects for clearing the statistics."
::= { hpicfLoadBalanceGroups 2 }
hpicfTrunkStatsGroup OBJECT-GROUP
OBJECTS { hpicfTrunkUpTime,
hpicfTrunkTotalBytesRx,
hpicfTrunkTotalBytesTx,
hpicfTrunkTotalFramesTx,
hpicfTrunkTotalFramesRx,
hpicfTrunkTotalDropsTx
}
STATUS current
DESCRIPTION "A collection of objects for trunk statistics."
::= { hpicfLoadBalanceGroups 3 }
hpicfTrunkPortStatsGroup OBJECT-GROUP
OBJECTS { hpicfTrunkPortBytesRx ,
hpicfTrunkPortBytesTx,
hpicfTrunkPortFramesRx,
hpicfTrunkPortFramesTx,
hpicfTrunkPortFramesDropTx,
hpicfTrunkPortRxFramePercent,
hpicfTrunkPortTxFramePercent,
hpicfTrunkPortDropTxFramePercent
}
STATUS current
DESCRIPTION "A collection of objects for statistics
of a specified port of a trunk."
::= { hpicfLoadBalanceGroups 4 }
hpicfLoadBalanceGroup5 OBJECT-GROUP
OBJECTS {
hpicfLoadBalanceTrunkId,
hpicfLoadBalanceSourceMacAddr,
hpicfLoadBalanceDestMacAddr,
hpicfLoadBalanceIPSourceAddrType,
hpicfLoadBalanceIPSourceAddr,
hpicfLoadBalanceIPDestAddrType,
hpicfLoadBalanceIPDestAddr,
hpicfLoadBalanceSourcePort,
hpicfLoadBalanceDestPort,
hpicfLoadBalanceEtherType,
hpicfLoadBalanceInboundVlan,
hpicfLoadBalanceInboundPort,
hpicfLoadBalanceOutboundPort,
hpicfLoadBalanceStatus
}
STATUS current
DESCRIPTION " "
::= { hpicfLoadBalanceGroups 5 }
END