Observium_CE/mibs/hp/HP-DOT1X-EXTENSIONS-MIB

2105 lines
72 KiB
Plaintext

--**MOD+***********************************************************************
--* Module: hpicfDot1x.mib
--*
--* Copyright (C) 2014-2016 Hewlett Packard Enterprise Development Company LP
--* All Right Reserved.
--*
--* The contents of this software are proprietary and confidential
--* to the Hewlett Packard Enterprise Development Company LP. No part of this
--* program may be photocopied, reproduced, or translated into another
--* programming language without prior written consent of the
--* Hewlett Packard Enterprise Development Company LP.
--*
--* Purpose: This file contains MIB definition of HP-DOT1X-EXTENSIONS-MIB
--*
--**MOD-**************************************************************************
HP-DOT1X-EXTENSIONS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64,
Unsigned32, TimeTicks
FROM SNMPv2-SMI
MacAddress, TruthValue,
DisplayString, TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InterfaceIndex
FROM IF-MIB
dot1xPaePortEntry, dot1xSuppConfigEntry, dot1xAuthConfigEntry,
dot1xPaePortNumber
FROM IEEE8021-PAE-MIB
VlanIndex
FROM Q-BRIDGE-MIB
hpSwitch
FROM HP-ICF-OID
HpAutzUserRoleName
FROM HP-AUTZ-MIB;
hpicfDot1xMIB MODULE-IDENTITY
LAST-UPDATED "202106210000Z" -- June 21, 2021
ORGANIZATION "HP Networking"
CONTACT-INFO "Hewlett-Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module contains the definitions of Managed
Objects for HP extensions to IEEE 802.1X.
This MIB supplements the IEEE 802.1X MIB to
provide a mechanism by which to configure and
retrieve status on shared-media ports, such as in
wireless access points or multi-supplicant mode on
HP switches/routers."
REVISION "202106210000Z" -- June 21, 2021
DESCRIPTION "Added hpicfDot1xAuthEapTlsFragmentSize"
REVISION "201810300000Z" -- October 30, 2018
DESCRIPTION "Added hpicfDot1xAuthUnauthVidLLDPNwkPolicy"
REVISION "201806060000Z" -- June 6, 2018
DESCRIPTION "Added new MIB objects for EAP retries that can be
configured per port:
hpicfAuthMaxEapReq"
REVISION "201710120000Z" -- October 12, 2017
DESCRIPTION "Added new MIB object for initial role that can be
configured per port:
hpicfDot1xPaePortInitialRole"
REVISION "201709280000Z" -- September 28, 2017
DESCRIPTION "Added new MIB objects for port-access critical/open auth commands
hpicfDot1xPaePortCritAuthVoiceVid,
hpicfDot1xPaePortCritAuthDataVid,
hpicfDot1xPaePortCritAuthUserRole,
hpicfDot1xPaePortOpenAuthVoiceVid,
hpicfDot1xPaePortOpenAuthDataVid,
hpicfDot1xPaePortOpenAuthUserRole"
REVISION "201709130000Z" -- September 13, 2017
DESCRIPTION "Added object hpicfDot1xAuthEnforceCacheReauth and
corresponding compliance."
REVISION "201602250000Z" -- February 25, 2016
DESCRIPTION "Added object hpicfDot1x2010 and corresponding
compliance."
REVISION "201601210000Z" -- January 21, 2016
DESCRIPTION "Added objects hpicfDot1xAuthSessionRoleName and
hpicfDot1xAuthSessionStatsGroup1. Added initialRole
and heldInitialRoleFailed to hpicfDot1xSMAuthPaeState.
Added applyInitialRole to hpicfDot1xSMAuthBackendAuthState.
Added compliance hpicfDot1xCompliance11. Updated
description for objects hpicfDot1xSMAuthReAuthPeriod,
hpicfDot1xAuthAuthVid, hpicfDot1xAuthUnauthVid, and
hpicfDot1xAuthUnauthPeriod."
REVISION "201306120000Z" -- June 12, 2013
DESCRIPTION "Added object hpicfDot1xPaePortSpeedVSA, compliance
hpicfDot1xCompliance9 and group
hpicfDot1xPaeAuthSessionGroup1 ."
REVISION "201301100000Z" -- January 10, 2013
DESCRIPTION "Added description for hpicfDot1xPaePortMBV
object in HpicfDot1xPaePortEntry."
REVISION "201211150000Z" -- November 15, 2012
DESCRIPTION "Added objects hpicfDot1xPaePortMixed."
REVISION "201108290000Z" -- August 29, 2011
DESCRIPTION "Added description for hpicfDot1xSMAuthSessionTimeout
object in HpicfDot1xSMAuthConfigEntry."
REVISION "201107210000Z" -- July 21, 2011
DESCRIPTION "Added hpicfDot1xSMAuthSessionTimeout object in
HpicfDot1xSMAuthConfigEntry."
REVISION "201102120000Z" -- February 12, 2011
DESCRIPTION "Added hpicfDot1xSuppConfigPasswordEncrypted object in
hpicfDot1xSuppConfigTable."
REVISION "201004150000Z" -- April 15, 2010
DESCRIPTION "Added hpicfDot1xAuthCachedReauthDelay."
REVISION "200907080000Z" -- JULY 08, 2009
DESCRIPTION "Added two more values for hpicfDot1xSMAuthPaeState.
Added hpicfDot1xAuthCachedReauthPeriod."
REVISION "200907020000Z" -- July 02, 2009
DESCRIPTION "Added two more values for hpicfDot1xSMAuthPaeState."
REVISION "200702020000Z" -- February 2, 2007
DESCRIPTION "Added hpicfDot1xAuthAllowGvrpVlans."
REVISION "200509210000Z" -- September 21, 2005
DESCRIPTION "Added hpicfDot1xAuthClientLimit2."
REVISION "200508050000Z" -- Aug 5, 2005
DESCRIPTION "Added import objects."
REVISION "200408060000Z" -- August 6, 2004
DESCRIPTION "Initial version."
::= { hpSwitch 25 }
hpicfDot1xMIBObjects OBJECT IDENTIFIER ::= { hpicfDot1xMIB 1 }
-- ---------------------------------------------------------- --
-- Textual Conventions
-- ---------------------------------------------------------- --
-- ---------------------------------------------------------- --
-- ---------------------------------------------------------- --
-- groups in the hpicfdot1xExt MIB
-- ---------------------------------------------------------- --
hpicfDot1xSystem
OBJECT IDENTIFIER ::= { hpicfDot1xMIBObjects 1 }
hpicfDot1xAuthenticator
OBJECT IDENTIFIER ::= { hpicfDot1xMIBObjects 2 }
hpicfDot1xSupplicant
OBJECT IDENTIFIER ::= { hpicfDot1xMIBObjects 3 }
-- ---------------------------------------------------------- --
-- ---------------------------------------------------------- --
-- The PAE System Group
-- ---------------------------------------------------------- --
-- ------------------------------------------------------------
-- The PAE Port Table
-- (AUGMENTS dot1xPaePortEntry)
-- ------------------------------------------------------------
-- ------------------------------------------------------------
-- Note: hpicfDot1xPaePortTable was formerly located at:
-- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
-- hp(11).nm(2).icf(14).hpicfObjects(11).hpicfSwitch(5).
-- hpSwitch(1).hpSwitchAuthenticationMIB(16).
-- hpDot1xPaePortTable(8)
-- ------------------------------------------------------------
hpicfDot1xPaePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDot1xPaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table supplements the 'dot1xPaePortTable'."
::= { hpicfDot1xSystem 1 }
hpicfDot1xPaePortEntry OBJECT-TYPE
SYNTAX HpicfDot1xPaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The fields in these entries will be used to supplement
'dot1xPaePortEntry'."
AUGMENTS { dot1xPaePortEntry }
::= { hpicfDot1xPaePortTable 1 }
HpicfDot1xPaePortEntry ::=
SEQUENCE {
hpicfDot1xPaePortAuth TruthValue,
hpicfDot1xPaePortSupp TruthValue,
hpicfDot1xPaePortMixed TruthValue,
hpicfDot1xPaePortSpeedVSA TruthValue,
hpicfDot1xPaePortMBV TruthValue,
hpicfDot1xPaePortCritAuthVoiceVid VlanIndex,
hpicfDot1xPaePortCritAuthDataVid VlanIndex,
hpicfDot1xPaePortCritAuthUserRole DisplayString,
hpicfDot1xPaePortOpenAuthVoiceVid VlanIndex,
hpicfDot1xPaePortOpenAuthDataVid VlanIndex,
hpicfDot1xPaePortOpenAuthUserRole DisplayString,
hpicfDot1xPaePortInitialRole DisplayString
}
hpicfDot1xPaePortAuth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object allows enable/disable authenticator
functionality on a port."
::= { hpicfDot1xPaePortEntry 1 }
hpicfDot1xPaePortSupp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object allows enable/disable supplicant
functionality on a port."
::= { hpicfDot1xPaePortEntry 2 }
hpicfDot1xPaePortMixed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object allows enable/disable guests
on ports with authenticated clients."
DEFVAL { false }
::= { hpicfDot1xPaePortEntry 3 }
hpicfDot1xPaePortSpeedVSA OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object allows enable or disable
port speed VSA processing on a port."
DEFVAL { false }
::= { hpicfDot1xPaePortEntry 4 }
hpicfDot1xPaePortMBV OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object enables and disables the MAC-based VLANs feature on the
port."
DEFVAL { true }
::= { hpicfDot1xPaePortEntry 5 }
hpicfDot1xPaePortCritAuthVoiceVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLANID which is being assinged as a critical-auth voice vlan."
::= { hpicfDot1xPaePortEntry 6 }
hpicfDot1xPaePortCritAuthDataVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLANID which is being assinged as a critical-auth data vlan."
::= { hpicfDot1xPaePortEntry 7 }
hpicfDot1xPaePortCritAuthUserRole OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the user role of the client for critical-auth."
::= { hpicfDot1xPaePortEntry 8 }
hpicfDot1xPaePortOpenAuthVoiceVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLANID which is being assinged as a open-auth voice vlan."
::= { hpicfDot1xPaePortEntry 9 }
hpicfDot1xPaePortOpenAuthDataVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLANID which is being assinged as a open-auth data vlan."
::= { hpicfDot1xPaePortEntry 10 }
hpicfDot1xPaePortOpenAuthUserRole OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the user role of the client for open-auth."
::= { hpicfDot1xPaePortEntry 11 }
hpicfDot1xPaePortInitialRole OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the initial role that is configured for a port."
::= { hpicfDot1xPaePortEntry 12 }
hpicfDot1x2010 OBJECT-TYPE
SYNTAX INTEGER { disabled(0), authenticator(1), supplicant(2),
authenticatorAndSupplicant(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative enable dot1x 2010 compliance support
gobally for authenticator and supplicant."
DEFVAL { 0 }
::= { hpicfDot1xSystem 2 }
-- ---------------------------------------------------------- --
-- The PAE Authenticator Group
-- ---------------------------------------------------------- --
-- ---------------------------------------------------------- --
-- The Authenticator Configuration Table
-- ---------------------------------------------------------- --
-- ------------------------------------------------------------
-- 802.1X Authenticator HP proprietary configuration table
-- (AUGMENTS dot1xAuthConfigEntry)
-- ------------------------------------------------------------
-- ------------------------------------------------------------
-- Note: hpicfDot1xAuthConfigTable was formerly located at:
-- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
-- hp(11).nm(2).icf(14).hpicfObjects(11).hpicfSwitch(5).
-- hpSwitch(1).hpSwitchAuthenticationMIB(16).
-- hpDot1xAuthConfigTable(10)
-- ------------------------------------------------------------
hpicfDot1xAuthConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDot1xAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table supplements the 'dot1xAuthConfigTable'."
::= { hpicfDot1xAuthenticator 1 }
hpicfDot1xAuthConfigEntry OBJECT-TYPE
SYNTAX HpicfDot1xAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The fields in these entries will be used to supplement
'dot1xAuthConfigEntry'."
AUGMENTS { dot1xAuthConfigEntry }
::= { hpicfDot1xAuthConfigTable 1 }
HpicfDot1xAuthConfigEntry ::=
SEQUENCE {
hpicfDot1xAuthAuthVid VlanIndex,
hpicfDot1xAuthUnauthVid VlanIndex,
hpicfDot1xAuthUnauthPeriod Unsigned32,
hpicfDot1xAuthClientLimit Unsigned32,
hpicfDot1xAuthLogoffPeriod Unsigned32,
hpicfDot1xAuthClientLimit2 Unsigned32,
hpicfDot1xAuthCachedReauthPeriod Unsigned32,
hpicfDot1xAuthEnforceCacheReauth TruthValue,
hpicfAuthMaxEapReq Unsigned32,
hpicfDot1xAuthUnauthVidLLDPNwkPolicy TruthValue
}
hpicfDot1xAuthAuthVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object configures the PVID for the authorized
802.1x port. When hpSwitchAutzUserRoleEnabled is
true, this value may be superseded by the value of
hpSwitchAutzUserRoleVlanId or
hpSwitchAutzUserRoleVlanName from the client's
assigned role."
::= { hpicfDot1xAuthConfigEntry 1 }
hpicfDot1xAuthUnauthVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object configures the PVID for the unauthorized
802.1x port. When hpSwitchAutzUserRoleEnabled is
true, this value may be superseded by the value of
hpSwitchAutzUserRoleVlanId or
hpSwitchAutzUserRoleVlanName from the role
identified by hpSwitchAutzUserRoleInitialRoleName."
::= { hpicfDot1xAuthConfigEntry 2 }
hpicfDot1xAuthUnauthPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This objects configures the period of time, in seconds,
which the authenticator will wait for authentication
before transitioning to guest VLAN mode, or assigning
the role identified by hpSwitchAutzUserRoleInitialRoleName
when hpSwitchAutzUserRoleEnabled is true."
DEFVAL { 0 }
::= { hpicfDot1xAuthConfigEntry 3 }
hpicfDot1xAuthClientLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
The maximum number of authenticated clients to allow on
the port."
DEFVAL { 1 }
::= { hpicfDot1xAuthConfigEntry 4 }
hpicfDot1xAuthLogoffPeriod OBJECT-TYPE
SYNTAX Unsigned32 (1..999999999)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the period, in seconds, at which an
authenticated client will be considered unauthenticated
for a lack of activity (i.e. traffic originating
from client)."
DEFVAL { 300 }
::= { hpicfDot1xAuthConfigEntry 5 }
hpicfDot1xAuthClientLimit2 OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of authenticated clients to allow on
the port if greater than 0. If 0 then authenticator
controls port as a single entity - no client limit."
DEFVAL { 0 }
::= { hpicfDot1xAuthConfigEntry 6 }
hpicfDot1xAuthCachedReauthPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value indicates the period in seconds, during which
cached reauthentication is allowed on the port. If
value is zero then the period of cached
reauthentication is unlimited."
DEFVAL { 0 }
::= { hpicfDot1xAuthConfigEntry 7 }
hpicfDot1xAuthEnforceCacheReauth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this attribute TRUE(1) will allow cached
reauthentication when server-timeout is configured
lesser than radius connection timeout or
when client initiates authentication before the radius
connection timeout during reauthentication."
DEFVAL { false}
::= { hpicfDot1xAuthConfigEntry 8 }
hpicfAuthMaxEapReq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the maxEapReq is used for sending
by Auth Order to send EAP Identity requests."
DEFVAL { 2 }
::= { hpicfDot1xAuthConfigEntry 9 }
hpicfDot1xAuthUnauthVidLLDPNwkPolicy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this attribute TRUE(1) will suppress
the transmission of LLDP Network Policy TLV
from port when an unauthorized client is placed
in unauth VLAN during 802.1x authentication."
DEFVAL { false }
::= { hpicfDot1xAuthConfigEntry 11 }
-- ---------------------------------------------------------- --
-- The Shared-Media Authenticator Configuration Table
-- ---------------------------------------------------------- --
hpicfDot1xSMAuthConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDot1xSMAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration and basic status
objects for Authenticator PAEs associated with each
shared-media port."
REFERENCE
"802.1X-2001 9.4.1 Authenticator Configuration"
::= { hpicfDot1xAuthenticator 2 }
hpicfDot1xSMAuthConfigEntry OBJECT-TYPE
SYNTAX HpicfDot1xSMAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator
PAE."
INDEX { hpicfDot1xSMAuthPaePort,
hpicfDot1xSMAuthMacAddr }
::= { hpicfDot1xSMAuthConfigTable 1 }
HpicfDot1xSMAuthConfigEntry ::=
SEQUENCE {
hpicfDot1xSMAuthPaePort
InterfaceIndex,
hpicfDot1xSMAuthMacAddr
MacAddress,
hpicfDot1xSMAuthInitialize
TruthValue,
hpicfDot1xSMAuthReauthenticate
TruthValue,
hpicfDot1xSMAuthPaeState
INTEGER,
hpicfDot1xSMAuthBackendAuthState
INTEGER,
hpicfDot1xSMAuthReAuthPeriod
Unsigned32,
hpicfDot1xSMAuthReAuthEnabled
TruthValue,
hpicfDot1xSMAuthSessionTimeout
Unsigned32
}
hpicfDot1xSMAuthPaePort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface index associated with this
Authenticator PAE. On wired HP products
the interface index is the physical port. On
wireless products it is the instance (whether
real or virtual) of an AP."
::= { hpicfDot1xSMAuthConfigEntry 1 }
hpicfDot1xSMAuthMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The 48-bit IEEE media access control address of
The supplicant associated with this Authenticator
PAE."
::= { hpicfDot1xSMAuthConfigEntry 2 }
hpicfDot1xSMAuthInitialize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this Authenticator PAE.
Setting this attribute TRUE causes the PAE to be
initialized. The attribute value reverts to FALSE
once initialization has completed."
REFERENCE
"802.1X-2001 9.6.1.3, Initialize Port"
::= { hpicfDot1xSMAuthConfigEntry 3 }
hpicfDot1xSMAuthReauthenticate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for this Authenticator PAE.
Setting this attribute TRUE causes the Authenticator
PAE state machine for the Port to reauthenticate the
Supplicant. Setting this attribute FALSE has no effect.
This attribute always returns FALSE when it is read."
REFERENCE
"802.1X-2001 9.4.1.3 Reauthenticate"
::= { hpicfDot1xSMAuthConfigEntry 4 }
hpicfDot1xSMAuthPaeState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
disconnected(2),
connecting(3),
authenticating(4),
authenticated(5),
aborting(6),
held(7),
forceAuth(8),
forceUnauth(9),
restart(10),
heldNoVlan(11),
heldUnauthVlan(12),
initialRole(14),
heldInitialRoleFailed(15),
criticalAuth(16),
openAuth(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the Authenticator PAE state
machine."
REFERENCE
"802.1X-2001 9.4.1, Authenticator PAE state"
::= { hpicfDot1xSMAuthConfigEntry 5 }
hpicfDot1xSMAuthBackendAuthState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7),
ignore(8),
applyInitialRole(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Backend Authentication
state machine."
REFERENCE
"802.1X-2001 9.4.1, Backend Authentication state"
::= { hpicfDot1xSMAuthConfigEntry 6 }
hpicfDot1xSMAuthReAuthPeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine. When hpSwitchAutzUserRoleEnabled is true,
this value will be superseded by the value of
hpSwitchAutzUserRoleReauthPeriod from the
client's assigned role."
REFERENCE
"802.1X-2001 9.4.1, reAuthPeriod"
DEFVAL { 3600 }
::= { hpicfDot1xSMAuthConfigEntry 7 }
hpicfDot1xSMAuthReAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1)."
REFERENCE
"802.1X-2001 9.4.1, reAuthEnabled"
DEFVAL { false }
::= { hpicfDot1xSMAuthConfigEntry 8 }
hpicfDot1xSMAuthSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the RADIUS Server set session timeout for
reauthentication of the user. When ST = 0, user gets
reauthenticated at reauth-period secs, ST < 60 it is
set to 60 secs and then user is reauthenticated, ST > 60
user is reauthenticated at ST secs."
DEFVAL { 0 }
::= { hpicfDot1xSMAuthConfigEntry 9 }
-- ---------------------------------------------------------- --
-- The Authenticator Diagnostics Table
-- ---------------------------------------------------------- --
hpicfDot1xAuthDiagTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDot1xAuthDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the diagnostics objects for the
Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { hpicfDot1xAuthenticator 3 }
hpicfDot1xAuthDiagEntry OBJECT-TYPE
SYNTAX HpicfDot1xAuthDiagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The diagnostic information for an Authenticator PAE."
INDEX { dot1xPaePortNumber }
::= { hpicfDot1xAuthDiagTable 1 }
HpicfDot1xAuthDiagEntry ::=
SEQUENCE {
hpicfDot1xAuthNumberOfSuccessAuthentication
Counter32,
hpicfDot1xAuthNumberOfFailedAuthentication
Counter32
}
hpicfDot1xAuthNumberOfSuccessAuthentication OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that authenticator received
an EAP-Success message from Authentication Server.
Indicates that Supplicant has successfully authenticated to
the Authentication Server."
::= { hpicfDot1xAuthDiagEntry 1 }
hpicfDot1xAuthNumberOfFailedAuthentication OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that authenticator received
an EAP-Failure message from Authentication Server.
Indicates that Supplicant has failed to authenticate to
the Authentication Server."
::= { hpicfDot1xAuthDiagEntry 2 }
-- ---------------------------------------------------------- --
-- The Authenticator Statistics Table
-- ---------------------------------------------------------- --
hpicfDot1xAuthStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDot1xAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the statistics objects for the
Authenticator PAE's associated with each shared-media
Port."
REFERENCE
"802.1X-2001 9.4.2 Authenticator Statistics"
::= { hpicfDot1xAuthenticator 4 }
hpicfDot1xAuthStatsEntry OBJECT-TYPE
SYNTAX HpicfDot1xAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics information for an Authenticator PAE."
INDEX { hpicfDot1xSMAuthPaePort,
hpicfDot1xSMAuthMacAddr }
::= { hpicfDot1xAuthStatsTable 1 }
HpicfDot1xAuthStatsEntry ::=
SEQUENCE {
hpicfDot1xAuthEapolFramesRx
Counter32,
hpicfDot1xAuthEapolFramesTx
Counter32,
hpicfDot1xAuthEapolStartFramesRx
Counter32,
hpicfDot1xAuthEapolLogoffFramesRx
Counter32,
hpicfDot1xAuthEapolRespIdFramesRx
Counter32,
hpicfDot1xAuthEapolRespFramesRx
Counter32,
hpicfDot1xAuthEapolReqIdFramesTx
Counter32,
hpicfDot1xAuthEapolReqFramesTx
Counter32,
hpicfDot1xAuthInvalidEapolFramesRx
Counter32,
hpicfDot1xAuthEapLengthErrorFramesRx
Counter32,
hpicfDot1xAuthLastEapolFrameVersion
Unsigned32,
hpicfDot1xAuthLastEapolFrameSource
MacAddress
}
hpicfDot1xAuthEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAPOL frames of any type
that have been received by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL frames received"
::= { hpicfDot1xAuthStatsEntry 1 }
hpicfDot1xAuthEapolFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames of any type
that have been transmitted by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL frames transmitted"
::= { hpicfDot1xAuthStatsEntry 2 }
hpicfDot1xAuthEapolStartFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Start frames that have
been received by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL Start frames received"
::= { hpicfDot1xAuthStatsEntry 3 }
hpicfDot1xAuthEapolLogoffFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL Logoff frames that have
been received by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL Logoff frames received"
::= { hpicfDot1xAuthStatsEntry 4 }
hpicfDot1xAuthEapolRespIdFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Resp/Id frames that have
been received by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL Resp/Id frames received"
::= { hpicfDot1xAuthStatsEntry 5 }
hpicfDot1xAuthEapolRespFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL Response frames received"
::= { hpicfDot1xAuthStatsEntry 6 }
hpicfDot1xAuthEapolReqIdFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Req/Id frames that have been
transmitted by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL Req/Id frames transmitted"
::= { hpicfDot1xAuthStatsEntry 7 }
hpicfDot1xAuthEapolReqFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator."
REFERENCE
"802.1X-2001 9.4.2, EAPOL Request frames transmitted"
::= { hpicfDot1xAuthStatsEntry 8 }
hpicfDot1xAuthInvalidEapolFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized."
REFERENCE
"802.1X-2001 9.4.2, Invalid EAPOL frames received"
::= { hpicfDot1xAuthStatsEntry 9 }
hpicfDot1xAuthEapLengthErrorFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid."
REFERENCE
"802.1X-2001 9.4.2, EAP length error frames received"
::= { hpicfDot1xAuthStatsEntry 10 }
hpicfDot1xAuthLastEapolFrameVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol version number carried in the
most recently received EAPOL frame."
REFERENCE
"802.1X-2001 9.4.2, Last EAPOL frame version"
::= { hpicfDot1xAuthStatsEntry 11 }
hpicfDot1xAuthLastEapolFrameSource OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address carried in the
most recently received EAPOL frame."
REFERENCE
"802.1X-2001 9.4.2, Last EAPOL frame source"
::= { hpicfDot1xAuthStatsEntry 12 }
-- ---------------------------------------------------------- --
-- The Authenticator Session Statistics Table
-- ---------------------------------------------------------- --
hpicfDot1xAuthSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDot1xAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the session statistics objects
for the Authenticator PAE's associated with each
shared-media Port."
REFERENCE
"802.1X-2001 9.4.4"
::= { hpicfDot1xAuthenticator 5 }
hpicfDot1xAuthSessionStatsEntry OBJECT-TYPE
SYNTAX HpicfDot1xAuthSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active."
INDEX { hpicfDot1xSMAuthPaePort,
hpicfDot1xSMAuthMacAddr }
::= { hpicfDot1xAuthSessionStatsTable 1 }
HpicfDot1xAuthSessionStatsEntry ::=
SEQUENCE {
hpicfDot1xAuthSessionPerPAECountersEnabled
TruthValue,
hpicfDot1xAuthSessionOctetsRx
Counter64,
hpicfDot1xAuthSessionOctetsTx
Counter64,
hpicfDot1xAuthSessionFramesRx
Counter32,
hpicfDot1xAuthSessionFramesTx
Counter32,
hpicfDot1xAuthSessionId
SnmpAdminString,
hpicfDot1xAuthSessionAuthenticMethod
INTEGER,
hpicfDot1xAuthSessionTime
TimeTicks,
hpicfDot1xAuthSessionStartTime
TimeStamp,
hpicfDot1xAuthSessionStopTime
TimeStamp,
hpicfDot1xAuthSessionInactiveTime
TimeTicks,
hpicfDot1xAuthSessionTerminateCause
INTEGER,
hpicfDot1xAuthSessionUserName
SnmpAdminString,
hpicfDot1xAuthSessionIsForwarding
TruthValue,
hpicfDot1xAuthSessionVid
VlanIndex,
hpicfDot1xAuthSessionRoleName
HpAutzUserRoleName
}
hpicfDot1xAuthSessionPerPAECountersEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether individualized PAE octet and
frame counts are supported.
If TRUE then system is capable of maintaining
separate counter sets for each, of possibly many,
Authenticator PAE instance on a port.
If FALSE then system is incapable of maintaining
separate counter sets. Frame and octet counter values
returned are an aggregate of all PAE sessions on the
port."
::= { hpicfDot1xAuthSessionStatsEntry 1 }
hpicfDot1xAuthSessionOctetsRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received in user data
frames during the session."
REFERENCE
"802.1X-2001 9.4.4, Session Octets Received"
::= { hpicfDot1xAuthSessionStatsEntry 2 }
hpicfDot1xAuthSessionOctetsTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets transmitted in user data
frames during the session."
REFERENCE
"802.1X-2001 9.4.4, Session Octets Transmitted"
::= { hpicfDot1xAuthSessionStatsEntry 3 }
hpicfDot1xAuthSessionFramesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of user data frames received
during the session."
REFERENCE
"802.1X-2001 9.4.4, Session Frames Received"
::= { hpicfDot1xAuthSessionStatsEntry 4 }
hpicfDot1xAuthSessionFramesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of user data frames transmitted
during the session."
REFERENCE
"802.1X-2001 9.4.4, Session Frames Transmitted"
::= { hpicfDot1xAuthSessionStatsEntry 5 }
hpicfDot1xAuthSessionId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique identifier for the session, in the
form of a printable ASCII string of at least
three characters."
REFERENCE
"802.1X-2001 9.4.4, Session Identifier"
::= { hpicfDot1xAuthSessionStatsEntry 6 }
hpicfDot1xAuthSessionAuthenticMethod OBJECT-TYPE
SYNTAX INTEGER {
remoteAuthServer(1),
localAuthServer(2),
localandremoteAuthServer(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication method used to establish the
session."
REFERENCE
"802.1X-2001 9.4.4, Session Authentication Method"
::= { hpicfDot1xAuthSessionStatsEntry 7 }
hpicfDot1xAuthSessionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the session in seconds."
REFERENCE
"802.1X-2001 9.4.4, Session Time"
::= { hpicfDot1xAuthSessionStatsEntry 8 }
hpicfDot1xAuthSessionStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime at the
time Supplicant was successfully authenticated."
::= { hpicfDot1xAuthSessionStatsEntry 9 }
hpicfDot1xAuthSessionStopTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime at the
time an authenticated Supplicant was de-authenticated,
as a result of an EAPOL-Logoff, reauthentication period
expiration, or forced asynchronous reauthentication."
::= { hpicfDot1xAuthSessionStatsEntry 10 }
hpicfDot1xAuthSessionInactiveTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time (in seconds) since last user data frames,
either received or transmitted, were observed."
::= { hpicfDot1xAuthSessionStatsEntry 11 }
hpicfDot1xAuthSessionTerminateCause OBJECT-TYPE
SYNTAX INTEGER {
supplicantLogoff(1),
portFailure(2),
supplicantRestart(3),
reauthFailed(4),
authControlForceUnauth(5),
portReInit(6),
portAdminDisabled(7),
notTerminatedYet(999)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for the session termination."
REFERENCE
"802.1X-2001 9.4.4, Session Terminate Cause"
::= { hpicfDot1xAuthSessionStatsEntry 12 }
hpicfDot1xAuthSessionUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User-Name representing the identity of the
Supplicant PAE."
REFERENCE
"802.1X-2001 9.4.4, Session User Name"
::= { hpicfDot1xAuthSessionStatsEntry 13 }
hpicfDot1xAuthSessionIsForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether traffic originating from
Supplicant PAE is being forwarded by
Authenticator PAE.
If TRUE, then Authenticator is forwarding
Supplicant's traffic
If FALSE, then Authenticator is not forwarding
(blocking) Supplicant's traffic."
::= { hpicfDot1xAuthSessionStatsEntry 14 }
hpicfDot1xAuthSessionVid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PVID on which user data frames are being forwarded."
::= { hpicfDot1xAuthSessionStatsEntry 15 }
hpicfDot1xAuthSessionRoleName OBJECT-TYPE
SYNTAX HpAutzUserRoleName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When hpSwitchAutzUserRoleEnabled is true, specifies the user
role of the client assigned to the Supplicant PAE."
::= { hpicfDot1xAuthSessionStatsEntry 16 }
-- ---------------------------------------------------------- --
-- Global Objects for Authenticator
-- ---------------------------------------------------------- --
hpicfDot1xAuthAllowGvrpVlans OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object allows enable/disable the use
of RADIUS-assigned dynamic (GVRP) VLANs."
::= { hpicfDot1xAuthenticator 6 }
hpicfDot1xAuthCachedReauthDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value indicates the period in seconds, during which
all reauthentications will be suppressed after a cached
reauthentication."
DEFVAL { 0 }
::= { hpicfDot1xAuthenticator 7 }
hpicfDot1xAuthEapTlsFragmentSize OBJECT-TYPE
SYNTAX Unsigned32 (0 | 576..3072)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value indicates the maximum size of the EAP-TLS
fragment size which is send towards the RADIUS server.
When configured with value 0 the fragmentation is done
only when the EAP-TLS data cannot be fit in RADIUS packet.
A fragment size of 1011 is used then."
DEFVAL { 0 }
::= { hpicfDot1xAuthenticator 10 }
-- ---------------------------------------------------------- --
-- The PAE Supplicant Group
-- ---------------------------------------------------------- --
-- placeholder
-- ---------------------------------------------------------- --
-- The Supplicant Configuration Table
-- (AUGMENTS dot1xSuppConfigEntry)
-- ---------------------------------------------------------- --
-- ------------------------------------------------------------
-- Note: hpicfDot1xSuppConfigTable was formerly located at:
-- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
-- hp(11).nm(2).icf(14).hpicfObjects(11).hpicfSwitch(5).
-- hpSwitch(1).hpSwitchAuthenticationMIB(16).
-- hpDot1xSuppConfigTable(9)
-- ------------------------------------------------------------
-- place holder
hpicfDot1xSuppConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDot1xSuppConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table supplements the 'dot1xSuppConfigTable'."
::= { hpicfDot1xSupplicant 1 }
hpicfDot1xSuppConfigEntry OBJECT-TYPE
SYNTAX HpicfDot1xSuppConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The fields in these entries will be used to supplement
'dot1xSuppConfigEntry'."
AUGMENTS { dot1xSuppConfigEntry }
::= { hpicfDot1xSuppConfigTable 1 }
HpicfDot1xSuppConfigEntry ::=
SEQUENCE {
hpicfDot1xSuppConfigIdentity DisplayString,
hpicfDot1xSuppConfigPassword DisplayString,
hpicfDot1xSuppConfigPasswordEncrypted OCTET STRING
}
hpicfDot1xSuppConfigIdentity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object can be used to set/get the identity
802.1x supplicant supplies to its authenticator."
::= { hpicfDot1xSuppConfigEntry 1 }
hpicfDot1xSuppConfigPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object can be used to set the password
the supplicant uses for MD5 authentication."
::= { hpicfDot1xSuppConfigEntry 2 }
hpicfDot1xSuppConfigPasswordEncrypted OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The encrypted form of the password used by
supplicant for MD5 authentication. This object
may only be read or written when
hpSwitchAuthenticationEncryptCredentialsMethod
is set to a value other than none(0). At most
one of hpicfDot1xSuppConfigPassword and
hpicfDot1xSuppConfigPasswordEncrypted may be set
in any transaction. This object should only be
written with an encrypted password previously
read from a compatible HP Networking device."
::= { hpicfDot1xSuppConfigEntry 3 }
-- ---------------------------------------------------------- --
-- Conformance Information
-- ---------------------------------------------------------- --
hpicfDot1xConformance OBJECT IDENTIFIER ::= { hpicfDot1xMIB 2 }
hpicfDot1xGroups OBJECT IDENTIFIER ::= { hpicfDot1xConformance 1 }
hpicfDot1xCompliances OBJECT IDENTIFIER
::= { hpicfDot1xConformance 2 }
-- ---------------------------------------------------------- --
-- units of conformance
-- ---------------------------------------------------------- --
hpicfDot1xPaePortGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xPaePortAuth,
hpicfDot1xPaePortSupp,
hpicfDot1xPaePortMBV
}
STATUS current
DESCRIPTION
"A collection of objects providing basic administrative
control over Authenticator PAE and Supplicant PAE in
system."
::= { hpicfDot1xGroups 1 }
hpicfDot1xAuthConfigGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthClientLimit,
hpicfDot1xAuthLogoffPeriod
}
STATUS deprecated
DESCRIPTION
"********* THIS GROUP IS DEPRECATED *********
A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 2 }
hpicfDot1xSMAuthConfigGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xSMAuthInitialize,
hpicfDot1xSMAuthReauthenticate,
hpicfDot1xSMAuthPaeState,
hpicfDot1xSMAuthBackendAuthState,
hpicfDot1xSMAuthReAuthPeriod,
hpicfDot1xSMAuthReAuthEnabled
}
STATUS current
DESCRIPTION
"A collection of objects providing basic status and
configuration control over Authenticator PAEs running
on a shared-media port."
::= { hpicfDot1xGroups 3 }
hpicfDot1xAuthDiagGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthNumberOfSuccessAuthentication,
hpicfDot1xAuthNumberOfFailedAuthentication
}
STATUS current
DESCRIPTION
"A collection of objects providing basic diagnostic
Information over Authenticator PAEs."
::= { hpicfDot1xGroups 4 }
hpicfDot1xAuthStatsGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthEapolFramesRx,
hpicfDot1xAuthEapolFramesTx,
hpicfDot1xAuthEapolStartFramesRx,
hpicfDot1xAuthEapolLogoffFramesRx,
hpicfDot1xAuthEapolRespIdFramesRx,
hpicfDot1xAuthEapolRespFramesRx,
hpicfDot1xAuthEapolReqIdFramesTx,
hpicfDot1xAuthEapolReqFramesTx,
hpicfDot1xAuthInvalidEapolFramesRx,
hpicfDot1xAuthEapLengthErrorFramesRx,
hpicfDot1xAuthLastEapolFrameVersion,
hpicfDot1xAuthLastEapolFrameSource
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics about
Authenticator PAEs running on a shared-media port."
::= { hpicfDot1xGroups 5 }
hpicfDot1xAuthSessionStatsGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthSessionOctetsRx,
hpicfDot1xAuthSessionOctetsTx,
hpicfDot1xAuthSessionFramesRx,
hpicfDot1xAuthSessionFramesTx,
hpicfDot1xAuthSessionId,
hpicfDot1xAuthSessionAuthenticMethod,
hpicfDot1xAuthSessionTime,
hpicfDot1xAuthSessionStartTime,
hpicfDot1xAuthSessionStopTime,
hpicfDot1xAuthSessionInactiveTime,
hpicfDot1xAuthSessionTerminateCause,
hpicfDot1xAuthSessionUserName,
hpicfDot1xAuthSessionIsForwarding,
hpicfDot1xAuthSessionVid
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing statistics about the
current, or last sessions for Authenticator PAEs running
on a shared-media port."
::= { hpicfDot1xGroups 6 }
hpicfDot1xAuthConfigGroup2 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthLogoffPeriod,
hpicfDot1xAuthClientLimit2
}
STATUS current
DESCRIPTION
"A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 7 }
hpicfDot1xAuthConfigGroup3 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthLogoffPeriod,
hpicfDot1xAuthClientLimit2,
hpicfDot1xAuthAllowGvrpVlans
}
STATUS current
DESCRIPTION
"A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 8 }
hpicfDot1xAuthConfigGroup4 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthLogoffPeriod,
hpicfDot1xAuthClientLimit2,
hpicfDot1xAuthAllowGvrpVlans,
hpicfDot1xAuthCachedReauthPeriod
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 9 }
hpicfDot1xAuthConfigGroup5 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthLogoffPeriod,
hpicfDot1xAuthClientLimit2,
hpicfDot1xAuthAllowGvrpVlans,
hpicfDot1xAuthCachedReauthPeriod,
hpicfDot1xAuthCachedReauthDelay
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 10 }
hpicfDot1xSuppConfigGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xSuppConfigIdentity,
hpicfDot1xSuppConfigPassword,
hpicfDot1xSuppConfigPasswordEncrypted
}
STATUS current
DESCRIPTION
"A collection of objects providing basic configuration
of the 802.1x supplicant."
::= { hpicfDot1xGroups 11 }
hpicfDot1xPaeAuthSessionGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xSMAuthMacAddr,
hpicfDot1xPaePortMixed,
hpicfDot1xAuthSessionPerPAECountersEnabled
}
STATUS deprecated
DESCRIPTION
"A collection of Dot1x objects ."
::= { hpicfDot1xGroups 12 }
hpicfDot1xSMAuthSessionTimeoutGroup OBJECT-GROUP
OBJECTS {
hpicfDot1xSMAuthSessionTimeout
}
STATUS current
DESCRIPTION
"A collection of objects providing RADIUS server set session
timeout for user reauthentication"
::= { hpicfDot1xGroups 13 }
hpicfDot1xPaeAuthSessionGroup1 OBJECT-GROUP
OBJECTS {
hpicfDot1xSMAuthMacAddr,
hpicfDot1xPaePortMixed,
hpicfDot1xPaePortSpeedVSA,
hpicfDot1xAuthSessionPerPAECountersEnabled
}
STATUS current
DESCRIPTION
"A collection of Dot1x objects ."
::= { hpicfDot1xGroups 14 }
hpicfDot1xAuthSessionStatsGroup1 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthSessionOctetsRx,
hpicfDot1xAuthSessionOctetsTx,
hpicfDot1xAuthSessionFramesRx,
hpicfDot1xAuthSessionFramesTx,
hpicfDot1xAuthSessionId,
hpicfDot1xAuthSessionAuthenticMethod,
hpicfDot1xAuthSessionTime,
hpicfDot1xAuthSessionStartTime,
hpicfDot1xAuthSessionStopTime,
hpicfDot1xAuthSessionInactiveTime,
hpicfDot1xAuthSessionTerminateCause,
hpicfDot1xAuthSessionUserName,
hpicfDot1xAuthSessionIsForwarding,
hpicfDot1xAuthSessionVid,
hpicfDot1xAuthSessionRoleName
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics about the
current, or last sessions for Authenticator PAEs running
on a shared-media port."
::= { hpicfDot1xGroups 18 }
hpicfDot1xSystemGroup OBJECT-GROUP
OBJECTS {
hpicfDot1x2010
}
STATUS current
DESCRIPTION
"A collection of objects providing dot1x 2010 support
for authenticator and supplicant."
::= { hpicfDot1xGroups 19 }
hpicfDot1xPaePortGroup1 OBJECT-GROUP
OBJECTS {
hpicfDot1xPaePortCritAuthVoiceVid,
hpicfDot1xPaePortCritAuthDataVid,
hpicfDot1xPaePortCritAuthUserRole,
hpicfDot1xPaePortOpenAuthVoiceVid,
hpicfDot1xPaePortOpenAuthDataVid,
hpicfDot1xPaePortOpenAuthUserRole,
hpicfDot1xPaePortInitialRole
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration support
for critial/open auth vlan."
::= { hpicfDot1xGroups 20 }
hpicfDot1xPaePortEapRetriesGroup OBJECT-GROUP
OBJECTS {
hpicfAuthMaxEapReq
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration support
for EAP Retries in Authentication order on Port."
::= { hpicfDot1xGroups 22 }
hpicfDot1xAuthConfigGroup7 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthLogoffPeriod,
hpicfDot1xAuthClientLimit2,
hpicfDot1xAuthAllowGvrpVlans,
hpicfDot1xAuthCachedReauthPeriod,
hpicfDot1xAuthCachedReauthDelay
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 23 }
hpicfDot1xAuthConfigGroup8 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthLogoffPeriod,
hpicfDot1xAuthClientLimit2,
hpicfDot1xAuthAllowGvrpVlans,
hpicfDot1xAuthCachedReauthPeriod,
hpicfDot1xAuthCachedReauthDelay,
hpicfDot1xAuthEnforceCacheReauth,
hpicfDot1xAuthUnauthVidLLDPNwkPolicy
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 24 }
hpicfDot1xAuthConfigGroup10 OBJECT-GROUP
OBJECTS {
hpicfDot1xAuthAuthVid,
hpicfDot1xAuthUnauthVid,
hpicfDot1xAuthUnauthPeriod,
hpicfDot1xAuthLogoffPeriod,
hpicfDot1xAuthClientLimit2,
hpicfDot1xAuthAllowGvrpVlans,
hpicfDot1xAuthCachedReauthPeriod,
hpicfDot1xAuthCachedReauthDelay,
hpicfDot1xAuthEnforceCacheReauth,
hpicfDot1xAuthUnauthVidLLDPNwkPolicy,
hpicfDot1xAuthEapTlsFragmentSize
}
STATUS current
DESCRIPTION
"A collection of objects providing basic configuration
control of over Authenticator PAEs."
::= { hpicfDot1xGroups 26 }
-- ---------------------------------------------------------- --
-- compliance statements
-- ---------------------------------------------------------- --
hpicfDot1xCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
::= { hpicfDot1xCompliances 1 }
hpicfDot1xCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup2
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
::= { hpicfDot1xCompliances 2 }
hpicfDot1xCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup3
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
::= { hpicfDot1xCompliances 3 }
hpicfDot1xCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup4
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
::= { hpicfDot1xCompliances 4 }
hpicfDot1xCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup5
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
::= { hpicfDot1xCompliances 5 }
hpicfDot1xCompliance6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup5
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xSuppConfigGroup
DESCRIPTION
"A collection of objects providing basic configuration
of the 802.1x supplicant."
::= { hpicfDot1xCompliances 6 }
hpicfDot1xCompliance7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xAuthDiagGroup
DESCRIPTION
"This group is mandatory for systems that support
basic diagnostic Information over Authenticator PAEs."
GROUP hpicfDot1xPaeAuthSessionGroup
DESCRIPTION
"This group is mandatory for systems that support
basic diagnostic Information over Authenticator PAEs."
::= { hpicfDot1xCompliances 7 }
hpicfDot1xCompliance8 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xSMAuthSessionTimeoutGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
::= { hpicfDot1xCompliances 8 }
hpicfDot1xCompliance9 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xAuthDiagGroup
DESCRIPTION
"This group is mandatory for systems that support
basic diagnostic Information over Authenticator PAEs."
GROUP hpicfDot1xPaeAuthSessionGroup1
DESCRIPTION
"This group is mandatory for systems that support
basic diagnostic Information over Authenticator PAEs."
::= { hpicfDot1xCompliances 9 }
hpicfDot1xCompliance11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup1
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
::= { hpicfDot1xCompliances 11 }
hpicfDot1xCompliance12 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xSystemGroup
DESCRIPTION
"This group is mandatory for systems that support
basic diagnostic Information over Authenticator PAEs."
::= { hpicfDot1xCompliances 12 }
hpicfDot1xCompliance13 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xSuppConfigGroup
DESCRIPTION
"A collection of objects providing basic configuration
of the 802.1x supplicant."
::= { hpicfDot1xCompliances 13 }
hpicfDot1xCompliance14 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup1
DESCRIPTION
"This group is mandatory for systems that support
critical/open auth vlan over Authenticator PAEs."
::= { hpicfDot1xCompliances 14 }
hpicfDot1xCompliance15 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortEapRetriesGroup
DESCRIPTION
"This group is mandatory for systems that support
Eap Request retries of Authenticator PAEs."
::= { hpicfDot1xCompliances 15 }
hpicfDot1xCompliance16 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup7
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xSuppConfigGroup
DESCRIPTION
"A collection of objects providing basic configuration
of the 802.1x supplicant."
::= { hpicfDot1xCompliances 16 }
hpicfDot1xCompliance17 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup8
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xSuppConfigGroup
DESCRIPTION
"A collection of objects providing basic configuration
of the 802.1x supplicant."
::= { hpicfDot1xCompliances 17 }
hpicfDot1xCompliance19 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices support of
HP IEEE 802.1X extensions MIB."
MODULE
GROUP hpicfDot1xPaePortGroup
DESCRIPTION
"This group is mandatory for systems that support
Authenticator and/or Supplicant functions of the PAE."
GROUP hpicfDot1xAuthConfigGroup10
DESCRIPTION
"This group is mandatory for systems that support
Authenticator functions of the PAE."
GROUP hpicfDot1xSMAuthConfigGroup
DESCRIPTION
"This group is mandatory for systems that support
shared-media Authenticator functions of the PAE."
GROUP hpicfDot1xAuthStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xAuthSessionStatsGroup
DESCRIPTION
"This group is mandatory for systems that support
the Authenticator functions of the PAE."
GROUP hpicfDot1xSuppConfigGroup
DESCRIPTION
"A collection of objects providing basic configuration
of the 802.1x supplicant."
::= { hpicfDot1xCompliances 19 }
END