WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/hirschmann/Hirschmann-GIGA-LION-24TP-MIB

9485 lines
338 KiB
Plaintext
Raw Permalink Blame History

--------------------------------------------------
--Version Number: 20050111001
--------------------------------------------------
Hirschmann-GIGA-LION-24TP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter32,IpAddress,
NOTIFICATION-TYPE, enterprises, TimeTicks, Gauge32
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue, RowPointer
FROM SNMPv2-TC
PortList, VlanIndex
FROM Q-BRIDGE-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InterfaceIndex, ifIndex, InterfaceIndexOrZero
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
MacAddress
FROM SNMPv2-TC
BridgeId, Timeout, dot1dStpPort,dot1dStpPortEntry
FROM BRIDGE-MIB
hirschmann
FROM HMPRIV-MGMT-SNMP-MIB;
hiway OBJECT IDENTIFIER ::= { hirschmann 13 }
fastEtherSwitch24 OBJECT IDENTIFIER ::= { hiway 7}
gigaLion24tpMIB MODULE-IDENTITY
LAST-UPDATED "200411090000Z"
ORGANIZATION "Hirschmann Electronics GmbH & Co. KG."
CONTACT-INFO
"Hirschmann Electronics GmbH & Co. KG.
Customer Service
Postal: P. O. B 1649, 72606 Nuertingen, Germany
Tel: +49 1805 14 1538
E-mail: ans-support@hirschmann.de"
DESCRIPTION
"The MIB module for Hirschmann LION-24TP"
REVISION "200109060000Z"
DESCRIPTION
"Initial version of this MIB."
::= { fastEtherSwitch24 5 }
lion24tpMIBObjects OBJECT IDENTIFIER ::= { gigaLion24tpMIB 1 }
lion24tpNotifications OBJECT IDENTIFIER ::= { gigaLion24tpMIB 2 }
lion24tpConformance OBJECT IDENTIFIER ::= { gigaLion24tpMIB 3 }
--supported groups
switchMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 1 }
portMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 2 }
trunkMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 3 }
lacpMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 4 }
staMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 5 }
restartMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 7 }
mirrorMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 8 }
igmpSnoopMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 9 }
ipMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 10 }
bcastStormMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 11 }
vlanMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 12 }
priorityMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 13 }
trapDestMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 14 }
qosMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 16 }
securityMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 17 }
layer3Mgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 18 }
sysLogMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 19 }
lineMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 20 }
sysTimeMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 23 }
fileMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 24 }
dnsMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 26 }
hsrpMgt OBJECT IDENTIFIER ::= { lion24tpMIBObjects 29 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
-- The Area ID, in OSPF, has the same format as an IP Address,
-- but has the function of defining a summarization point for
-- Link State Advertisements
OspfAreaID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An OSPF Area Identifier."
SYNTAX IpAddress
-- The OSPF Metric is defined as an unsigned value in the range
OspfBigMetric ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The OSPF External Metric."
SYNTAX Integer32
--sshv2 only start
KeySegment ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The total length of the key is 1024 characters,
it is divided into 8 parts and stored in 8 separated mib
variables as below:
Key1: part 1 of the key (1-128)
Key2: part 2 of the key (129-256)
Key3: part 3 of the key (257-384)
Key4: part 4 of the key (385-512)
Key5: part 5 of the key (513-640)
Key6: part 6 of the key (641-768)
Key7: part 7 of the key (769-896)
Key8: part 8 of the key (897-1024)
Please note that if the key string is less then 1024 characters,
the remaining part of the string will be filled by a zero-length string.
For example, if the length of the key is 129,
we will get a string of length 128 in Key1, and
a string of length 1 in Key2,
moreover, Key3 to Key8 will all be zero-length strings."
SYNTAX DisplayString(SIZE(0..128))
--sshv2 only end
ValidStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object to create and destroy
a table entry. This is a simplified variant of RowStatus as it
supports only two values. Setting it to valid(1) creates an entry.
Setting it to invalid(2) destroys an entry."
SYNTAX INTEGER { valid(1), invalid(2) }
--for hsrpMgt start
HsrpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The current state of the HSRP protocol for a given
HSRP group entry."
SYNTAX INTEGER {
initial(1),
learn(2),
listen(3),
speak(4),
standby(5),
active(6)
}
--for hsrpMgt end
StaPathCostMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The path cost mode of a spanning tree algorithm, short(1) indicates
that we retrieve/configure the spanning tree path cost as a 16 bit
value and long(2) indicates that we retrieve/configure the spanning
tree path cost as a 32 bit value."
SYNTAX INTEGER { short(1), long(2) }
FileCopyStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The file copy result status."
SYNTAX INTEGER {
fileCopyTftpUndefError(1),
fileCopyTftpFileNotFound(2),
fileCopyTftpAccessViolation(3),
fileCopyTftpDiskFull(4),
fileCopyTftpIllegalOperation(5),
fileCopyTftpUnkownTransferId(6),
fileCopyTftpFileExisted(7),
fileCopyTftpNoSuchUser(8),
fileCopyTftpTimeout(9),
fileCopyTftpSendError(10),
fileCopyTftpReceiverError(11),
fileCopyTftpSocketOpenError(12),
fileCopyTftpSocketBindError(13),
fileCopyTftpUserCancel(14),
fileCopyTftpCompleted(15),
fileCopyParaError(16),
fileCopyBusy(17),
fileCopyUnknown(18),
fileCopyReadFileError(19),
fileCopySetStartupError(20),
fileCopyFileSizeExceed(21),
fileCopyMagicWordError(22),
fileCopyImageTypeError(23),
fileCopyHeaderChecksumError(24),
fileCopyImageChecksumError(25),
fileCopyWriteFlashFinish(26),
fileCopyWriteFlashError(27),
fileCopyWriteFlashProgramming(28),
fileCopyError(29),
fileCopySuccess(30),
fileCopyCompleted(31)
}
--
-- switchMgt
--
-- Management for the switch system, or individual units
-- in a stackable switch system. For a non-stackable system,
-- only unit 1 exists.
switchNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of switches present on this system."
::= { switchMgt 2 }
switchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
the switch units in this system."
::= { switchMgt 3 }
switchInfoEntry OBJECT-TYPE
SYNTAX SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table providing descriptions and status information for
switch units."
INDEX { swUnitIndex }
::= { switchInfoTable 1 }
SwitchInfoEntry ::= SEQUENCE
{
swUnitIndex Integer32,
swHardwareVer DisplayString,
swMicrocodeVer DisplayString,
swLoaderVer DisplayString,
swBootRomVer DisplayString,
swOpCodeVer DisplayString,
swPortNumber Integer32,
swPowerStatus INTEGER,
swRoleInSystem INTEGER,
swSerialNumber DisplayString,
swExpansionSlot1 INTEGER,
swExpansionSlot2 INTEGER,
swServiceTag DisplayString,
swModelNumber DisplayString,
swEpldVer DisplayString,
swExpectedModuleOpCodeVer DisplayString
}
swUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchInfoEntry 1 }
swHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the main board."
::= { switchInfoEntry 2 }
swMicrocodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Microcode version of the main board."
::= { switchInfoEntry 3 }
swLoaderVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loader version of the main board."
::= { switchInfoEntry 4 }
swBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the main board."
::= { switchInfoEntry 5 }
swOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the main board."
::= { switchInfoEntry 6 }
swPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ports on this switch."
::= { switchInfoEntry 7 }
swPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
redundantPower(2),
internalAndRedundantPower(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch using internalPower(1),
redundantPower(2) or both(3)"
::= { switchInfoEntry 8 }
swRoleInSystem OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
backupMaster(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system."
::= { switchInfoEntry 9 }
swSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the switch."
::= { switchInfoEntry 10 }
swExpansionSlot1 OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
other(2),
hundredBaseFxScMmf(3),
hundredBaseFxScSmf(4),
hundredBaseFxMtrjMmf(5),
thousandBaseSxScMmf(6),
thousandBaseSxMtrjMmf(7),
thousandBaseXGbic(8),
thousandBaseLxScSmf(9),
thousandBaseT(10),
stackingModule(11),
thousandBaseSfp(12),
tenHundredBaseT4port(13),
tenHundredBaseFxMtrj4port(14),
comboStackingSfp(15),
tenHundredBaseT(16),
comboThousandBaseTxSfp(17),
eightPortSfpModule(18),
tenGigaPortModule(19)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of expansion module in this switch slot 1."
::= { switchInfoEntry 11 }
swExpansionSlot2 OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
other(2),
hundredBaseFxScMmf(3),
hundredBaseFxScSmf(4),
hundredBaseFxMtrjMmf(5),
thousandBaseSxScMmf(6),
thousandBaseSxMtrjMmf(7),
thousandBaseXGbic(8),
thousandBaseLxScSmf(9),
thousandBaseT(10),
stackingModule(11),
thousandBaseSfp(12),
tenHundredBaseT4port(13),
tenHundredBaseFxMtrj4port(14),
comboStackingSfp(15),
tenHundredBaseT(16),
comboThousandBaseTxSfp(17),
eightPortSfpModule(18),
tenGigaPortModule(19)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of expansion module in this switch slot 2."
::= { switchInfoEntry 12 }
swServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service tag serial-number of the switch."
::= { switchInfoEntry 13 }
swModelNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Model number of the switch."
::= { switchInfoEntry 14 }
swEpldVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The EPLD version of the switch."
::= { switchInfoEntry 15 }
swExpectedModuleOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The module opcode version reside in the switch, note that
this variable represent the desired version of the
module which might plug in. For version validation, only
the swExpectedModuleOpCodeVer of the master
is used. This object is compared with
the swModuleOpCodeVer of the master and all slaves."
::= { switchInfoEntry 16 }
switchOperState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unknown(2),
ok(3),
noncritical(4),
critical(5),
nonrecoverable(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global operation state of the switch."
::= { switchMgt 4 }
switchProductId OBJECT IDENTIFIER ::= { switchMgt 5 }
swProdName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product name of this switch."
::= { switchProductId 1 }
swProdManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product manufacturer of this switch."
::= { switchProductId 2 }
swProdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product description of this switch."
::= { switchProductId 3 }
swProdVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The runtime code version of this switch."
::= { switchProductId 4 }
swProdUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The URL of this switch, which we can connect through
a web browser."
::= { switchProductId 5 }
swIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A unique identifier of which switch in the chassis is currently
being looked at."
::= { switchProductId 6 }
swChassisServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The service tag of the chassis this switch resides in."
::= { switchProductId 7 }
switchIndivPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual powers."
::= { switchMgt 6 }
switchIndivPowerEntry OBJECT-TYPE
SYNTAX SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual power."
INDEX { swIndivPowerUnitIndex, swIndivPowerIndex }
::= { switchIndivPowerTable 1 }
SwitchIndivPowerEntry ::= SEQUENCE
{
swIndivPowerUnitIndex Integer32,
swIndivPowerIndex INTEGER,
swIndivPowerStatus INTEGER
}
swIndivPowerUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is defined as swUnitIndex."
::= { switchIndivPowerEntry 1 }
swIndivPowerIndex OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
externalPower(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "1 means internal power, 2 means external power."
::= { switchIndivPowerEntry 2 }
swIndivPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
green(2),
red(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "notPresent(1) means not present, green(2) means
up, red(3) means down."
::= { switchIndivPowerEntry 3 }
switchJumboFrameStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable(1) means the Jumbo Frame has enabled, disabled(2)
means the Jumbo Frame has disabled."
::= { switchMgt 7 }
amtrMgt OBJECT IDENTIFIER ::= { switchMgt 8 }
-- Address Management
amtrMacAddrAgingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this is enabled(1), the MAC address table will age out according to
its timer. If this is disabled(2), the MAC address table will not
age out."
::= { amtrMgt 3 }
--switchFanTable
switchFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The fan status table."
::= { switchMgt 9 }
switchFanEntry OBJECT-TYPE
SYNTAX SwitchFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the switchFanTable."
INDEX { switchUnitIndex, switchFanIndex }
::= { switchFanTable 1 }
SwitchFanEntry ::= SEQUENCE
{
switchUnitIndex Integer32,
switchFanIndex Integer32,
switchFanStatus INTEGER,
switchFanAdminSpeed Integer32,
switchFanFailureCount Integer32,
switchFanOperSpeed Integer32
}
switchUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unit of the switch for the stackable device."
::= { switchFanEntry 1 }
switchFanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unit number of the fan."
::= { switchFanEntry 2 }
switchFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
ok(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating the status of the fan, 1:ok; 2:failure."
::= { switchFanEntry 3 }
switchFanAdminSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The speed of the fan, measured in rpm (rotations per
minute). Set this object to 0 to enter auto mode,
set to other values to enter manual mode."
::= { switchFanEntry 4 }
switchFanFailureCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total failure count of the fan since the switch
has reboot."
::= { switchFanEntry 5 }
switchFanOperSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational value of the fan speed, measured in rpm (rotations per
minute)."
::= { switchFanEntry 6 }
-- switchThermalTempTable
switchThermalTempTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchThermalTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table which collects temperature infomration of the
switch."
::= { switchMgt 11 }
switchThermalTempEntry OBJECT-TYPE
SYNTAX SwitchThermalTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the switchThermalTempTable."
INDEX { switchThermalTempUnitIndex,switchThermalTempThermalIndex}
::= { switchThermalTempTable 1 }
SwitchThermalTempEntry ::= SEQUENCE
{
switchThermalTempUnitIndex Integer32,
switchThermalTempThermalIndex Integer32,
switchThermalTempValue Integer32
}
switchThermalTempUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unit of the switch for stackable device."
::= { switchThermalTempEntry 1 }
switchThermalTempThermalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The thermal index of the switch."
::= { switchThermalTempEntry 2 }
switchThermalTempValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The temperature value in the device in grade Celsius."
::= { switchThermalTempEntry 3 }
--switchThermalActionTable
switchThermalActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchThermalActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the thermal action."
::= { switchMgt 12 }
switchThermalActionEntry OBJECT-TYPE
SYNTAX SwitchThermalActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the switchThermalActionTable."
INDEX { switchThermalActionUnitIndex,switchThermalActionThermalIndex,
switchThermalActionIndex }
::= { switchThermalActionTable 1 }
SwitchThermalActionEntry ::= SEQUENCE
{
switchThermalActionUnitIndex Integer32,
switchThermalActionThermalIndex Integer32,
switchThermalActionIndex Integer32,
switchThermalActionRisingThreshold Integer32,
switchThermalActionFallingThreshold Integer32,
switchThermalActionAction BITS,
switchThermalActionStatus ValidStatus
}
switchThermalActionUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unit of the switch for stackable device."
::= { switchThermalActionEntry 1 }
switchThermalActionThermalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The thermal index of the switch."
::= { switchThermalActionEntry 2 }
switchThermalActionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The action index of the switchTheramlActionTable."
::= { switchThermalActionEntry 3 }
switchThermalActionRisingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The rising threshold of the switch temperature."
::= { switchThermalActionEntry 4 }
switchThermalActionFallingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The falling threshold of the switch temperature."
::= { switchThermalActionEntry 5 }
switchThermalActionAction OBJECT-TYPE
SYNTAX BITS {
trap(0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The action that will be taken when the
temperature exceeds the rising threshold
or falls below the falling threshold."
::= { switchThermalActionEntry 6 }
switchThermalActionStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set valid(1) to create an entry, Set Invalid(2) to delete an entry."
::= { switchThermalActionEntry 7 }
switchModuleInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
the switch modules in this system."
::= { switchMgt 13 }
switchModuleInfoEntry OBJECT-TYPE
SYNTAX SwitchModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table providing descriptions and status information for
switch modules."
INDEX { swModuleUnitIndex, swModuleModuleIndex }
::= { switchModuleInfoTable 1 }
SwitchModuleInfoEntry ::= SEQUENCE
{
swModuleUnitIndex Integer32,
swModuleModuleIndex Integer32,
swModuleHardwareVer DisplayString,
swModuleMicrocodeVer DisplayString,
swModuleLoaderVer DisplayString,
swModuleBootRomVer DisplayString,
swModuleOpCodeVer DisplayString,
swModulePortNumber Integer32,
swModuleSerialNumber DisplayString,
swModuleType INTEGER,
swModuleModelNumber DisplayString,
swModuleEpldVer DisplayString,
swModuleDescr DisplayString
}
swModuleUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchModuleInfoEntry 1 }
swModuleModuleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the module within the switch
for which this entry contains information."
::= { switchModuleInfoEntry 2 }
swModuleHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the module board."
::= { switchModuleInfoEntry 3 }
swModuleMicrocodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Microcode version of the module board."
::= { switchModuleInfoEntry 4 }
swModuleLoaderVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loader version of the module board."
::= { switchModuleInfoEntry 5 }
swModuleBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the module board."
::= { switchModuleInfoEntry 6 }
swModuleOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the module board."
::= { switchModuleInfoEntry 7 }
swModulePortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ports of this module."
::= { switchModuleInfoEntry 8 }
swModuleSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the module."
::= { switchModuleInfoEntry 9 }
swModuleType OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
other(2),
hundredBaseFxScMmf(3),
hundredBaseFxScSmf(4),
hundredBaseFxMtrjMmf(5),
thousandBaseSxScMmf(6),
thousandBaseSxMtrjMmf(7),
thousandBaseXGbic(8),
thousandBaseLxScSmf(9),
thousandBaseT(10),
stackingModule(11),
thousandBaseSfp(12),
tenHundredBaseT4port(13),
tenHundredBaseFxMtrj4port(14),
comboStackingSfp(15),
tenHundredBaseT(16),
comboThousandBaseTxSfp(17),
eightPortSfpModule(18),
tenGigaPortModule(19)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of module."
::= { switchModuleInfoEntry 10 }
swModuleModelNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Model number of the module."
::= { switchModuleInfoEntry 11 }
swModuleEpldVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The EPLD version of the module."
::= { switchModuleInfoEntry 12 }
swModuleDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION " A textual description of the entity to describe the
module."
::= { switchModuleInfoEntry 13 }
switchRenumberUnitID OBJECT-TYPE
SYNTAX INTEGER
{
renumber(1),
noRenumber(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value renumber will automatically assign an ID to
units in the stack; all UNIT IDs will be contiguous.
The system configurations are not changed but the system
will restart after renumbering is completed."
::= { switchMgt 14 }
--
-- portMgt
--
-- Management ports. This group also provides information
-- related to trunks because they share the same properties.
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk."
::= { portMgt 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, describing the configuration of
one switch port or trunk."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::= SEQUENCE
{
portIndex Integer32,
portName DisplayString,
portType INTEGER,
portSpeedDpxCfg INTEGER,
portFlowCtrlCfg INTEGER,
portCapabilities BITS,
portAutonegotiation EnabledStatus,
portSpeedDpxStatus INTEGER,
portFlowCtrlStatus INTEGER,
portTrunkIndex Integer32,
portComboForcedMode INTEGER
}
portIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portEntry 1 }
portName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later)."
::= { portEntry 2 }
portType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hundredBaseTX(2),
hundredBaseFX(3),
thousandBaseSX(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
thousandBaseSfp(8),
hundredBaseFxScSingleMode(9),
hundredBaseFxScMultiMode(10),
thousandBaseCX(11),
tenG(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port type of the configuration of the switch."
::= { portEntry 3 }
portSpeedDpxCfg OBJECT-TYPE
SYNTAX INTEGER
{
reserved(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus."
DEFVAL { halfDuplex10 }
::= { portEntry 4 }
portFlowCtrlCfg OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
tx(5),
rx(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(5) Flow control mechanism is enabled with tx pause
mechanism only.
(6) Flow control mechansim is enabled with rx pause
mechansim only.
Fast ethernet ports can be set as:
enabled(1),
disabled(2).
Gigabit ethernet ports can be set as:
enabled(1),
disabled(2),
tx(5),
rx(6).
The actual flow control mechanism is used given by
portFlowCtrlStatus."
DEFVAL { enabled }
::= { portEntry 5 }
portCapabilities OBJECT-TYPE
SYNTAX BITS
{
portCap10half(0),
portCap10full(1),
portCap100half(2),
portCap100full(3),
portCap1000half(4),
portCap1000full(5),
portCap10gHalf(6),
portCap10gFull(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
portCapSym(14),
portCapFlowCtrl(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port or trunk capabilities."
::= { portEntry 6 }
portAutonegotiation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether auto-negotiation is enabled."
::= { portEntry 7 }
portSpeedDpxStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case the value is error(1)."
::= { portEntry 8 }
portFlowCtrlStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
backPressure(2),
dot3xFlowControl(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently configured then this value
is error(1)."
::= { portEntry 9 }
portTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding trunkPorts."
::= { portEntry 10 }
portComboForcedMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
copperForced(2),
copperPreferredAuto(3),
sfpForced(4),
sfpPreferredAuto(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal to none(1), and setting this variable to none(1) is
not allowed. copperForced(2) is set if user want to force
this combo port running in copper mode. copperPreferredAuto(3)
is obsoleted, and user shall not set this state. sfpForced(4)
is set if user want to force this combo port running in fiber
mode. sfpPreferredAuto(5) is set if user want to change copper or
fiber mode automatically by SFP transceiver present state. If SFP
transceiver is present, this combo port will run in fiber mode, and
if SFP transceiver is not present, this combo port will run in
copper mode."
::= { portEntry 12}
--
-- trunkMgt
--
-- Trunks: Provides additional information for Trunks
trunkMaxId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number for a trunk identifier."
::= { trunkMgt 1 }
trunkValidNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid trunks."
::= { trunkMgt 2 }
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table describing the configuration and status of each
trunk."
::= { trunkMgt 3 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry describing the configuration and status of a
particular trunk."
INDEX { trunkIndex }
::= { trunkTable 1 }
TrunkEntry ::= SEQUENCE
{
trunkIndex Integer32,
trunkPorts PortList,
trunkCreation INTEGER,
trunkStatus ValidStatus
}
trunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identifies the trunk within the switch that is
described by the table entry."
::= { trunkEntry 1 }
trunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this trunk."
::= { trunkEntry 2 }
trunkCreation OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk."
::= { trunkEntry 3 }
trunkStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured."
::= { trunkEntry 4 }
---
--- lacpMgt
---
-- Management for Link Aggregation Control Protocol (LACP, 802.3ad),
-- that is dynamic trunking.
lacpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for LACP port configuration."
::= { lacpMgt 1 }
lacpPortEntry OBJECT-TYPE
SYNTAX LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure."
INDEX { lacpPortIndex }
::= { lacpPortTable 1 }
LacpPortEntry ::= SEQUENCE
{
lacpPortIndex Integer32,
lacpPortStatus EnabledStatus
}
lacpPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { lacpPortEntry 1 }
lacpPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether 802.3ad LACP is enabled."
::= { lacpPortEntry 2 }
--
-- staMgt
--
-- Management for Spanning Tree Algorithm (STA).
-- This has variables not already defined in the implemented
-- standard MIB(s).
staSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staMgt 1 }
staPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType."
REFERENCE "IEEE 802.1d, IEEE 802.1w, IEEE 802.1s."
::= { staMgt 2 }
staPortEntry OBJECT-TYPE
SYNTAX StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual entry of staPortTable."
AUGMENTS { dot1dStpPortEntry }
::= { staPortTable 1 }
StaPortEntry ::= SEQUENCE
{
staPortFastForward EnabledStatus,
-- for MST, RSTP
staPortProtocolMigration TruthValue,
staPortAdminEdgePort TruthValue,
staPortOperEdgePort TruthValue,
staPortAdminPointToPoint INTEGER,
staPortOperPointToPoint TruthValue,
staPortSystemStatus EnabledStatus,
staPortLongAdminPathCost Integer32,
staPortLongOperPathCost Integer32
}
staPortFastForward OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether fast forwarding is enabled."
::= { staPortEntry 2 }
-- for MSTP RSTP
staPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
::= { staPortEntry 3 }
staPortAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.3"
::= { staPortEntry 4 }
staPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { staPortEntry 5 }
staPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER
{
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 6 }
staPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 7 }
staPortSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staPortEntry 9 }
staPortLongAdminPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
::= { staPortEntry 10 }
staPortLongOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
::= { staPortEntry 11 }
staProtocolType OBJECT-TYPE
SYNTAX INTEGER {
stp(1),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
the Rapid Spanning Tree Protocol is as specified in IEEE
802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the
protocol become available."
REFERENCE
"IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
::= { staMgt 3 }
staTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
REFERENCE
"IEEE 802.1w clause 17.16.6"
DEFVAL { 3 }
::= { staMgt 4 }
staPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the type of spanning tree path cost mode configured
on the switch. This mode applies to all instances of the
spanning tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of
all ports will be reassigned to the default path cost values
based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2), the
staPortLongPathCost MIB object must be used to retrieve/configure
the spanning tree port path cost as a 32-bit value.
The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
While retrieving the value of dot1dStpPortPathCost, the maximum
value of 65535 will be returned if the value of staPortLongPathCost
for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the
dot1dStpPortPathCost in BRIDGE-MIB must be used."
DEFVAL { short }
::= { staMgt 5}
--
-- xstMgt
--
xstMgt OBJECT IDENTIFIER ::= { staMgt 6}
mstName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the Multiple Spanning Tree region."
::= { xstMgt 1 }
mstRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Revision number of the Multiple Spanning Tree region."
::= { xstMgt 2 }
mstMaxHops OBJECT-TYPE
SYNTAX Integer32(1..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The max hop number counts of the Multiple Spanning Tree region."
::= { xstMgt 3 }
xstInstanceCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0."
::= { xstMgt 4 }
xstInstanceCfgEntry OBJECT-TYPE
SYNTAX XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the property of the RST or MST instance."
INDEX { xstInstanceCfgIndex }
::= { xstInstanceCfgTable 1 }
XstInstanceCfgEntry ::= SEQUENCE
{
xstInstanceCfgIndex Integer32,
xstInstanceCfgPriority Integer32,
xstInstanceCfgTimeSinceTopologyChange TimeTicks,
xstInstanceCfgTopChanges Integer32,
xstInstanceCfgDesignatedRoot BridgeId,
xstInstanceCfgRootCost Integer32,
xstInstanceCfgRootPort Integer32,
xstInstanceCfgMaxAge Timeout,
xstInstanceCfgHelloTime Timeout,
xstInstanceCfgHoldTime Timeout,
xstInstanceCfgForwardDelay Timeout,
xstInstanceCfgBridgeMaxAge Timeout,
xstInstanceCfgBridgeHelloTime Timeout,
xstInstanceCfgBridgeForwardDelay Timeout,
xstInstanceCfgTxHoldCount Integer32,
xstInstanceCfgPathCostMethod StaPathCostMode
}
xstInstanceCfgIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {xstInstanceCfgEntry 1 }
xstInstanceCfgPriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096."
::= { xstInstanceCfgEntry 2 }
xstInstanceCfgTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST."
::= { xstInstanceCfgEntry 3 }
xstInstanceCfgTopChanges OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized."
::= { xstInstanceCfgEntry 4 }
xstInstanceCfgDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identifier parameter in
all configuration bridge PDUs originated by this node."
REFERENCE "IEEE 802.1w."
::= { xstInstanceCfgEntry 5 }
xstInstanceCfgRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The cost of the path to the root as seen from
this bridge of the RST or MST."
::= { xstInstanceCfgEntry 6 }
xstInstanceCfgRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST."
::= { xstInstanceCfgEntry 7 }
xstInstanceCfgMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value that this bridge is currently using."
::= { xstInstanceCfgEntry 8 }
xstInstanceCfgHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using in RST or MST."
::= { xstInstanceCfgEntry 9 }
xstInstanceCfgHoldTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { xstInstanceCfgEntry 10 }
xstInstanceCfgForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the port
stays in each of the listening and learning
states, which precede the forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the forwarding database. This value is the
current value being used by the bridge.
xstInstanceCfgBridgeForwardDelay defines the value that
this bridge and all others would start using
if/when this bridge were to become the root."
::= { xstInstanceCfgEntry 11 }
xstInstanceCfgBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the value of
xstInstanceCfgBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 12 }
xstInstanceCfgBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 13 }
xstInstanceCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to the value of
xstInstanceCfgBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 14 }
xstInstanceCfgTxHoldCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate."
::= { xstInstanceCfgEntry 15 }
xstInstanceCfgPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2),
the xstInstancePortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32-bit value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of xstInstancePortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is set to short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used."
::= { xstInstanceCfgEntry 16 }
xstInstancePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration."
::= { xstMgt 5 }
xstInstancePortEntry OBJECT-TYPE
SYNTAX XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for xstInstancePortTable."
INDEX { xstInstanceCfgIndex, dot1dStpPort }
::= { xstInstancePortTable 1 }
XstInstancePortEntry ::= SEQUENCE
{
xstInstancePortPriority Integer32,
xstInstancePortState INTEGER,
xstInstancePortEnable EnabledStatus,
xstInstancePortDesignatedRoot BridgeId,
xstInstancePortDesignatedCost Integer32,
xstInstancePortDesignatedBridge BridgeId,
xstInstancePortDesignatedPort OCTET STRING,
xstInstancePortForwardTransitions Counter32,
xstInstancePortPortRole INTEGER,
xstInstancePortAdminPathCost Integer32,
xstInstancePortOperPathCost Integer32
}
xstInstancePortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active link
in the Spanning Tree. This makes a port with higher
priority less likely to be blocked if the Spanning Tree
Algorithm is detecting network loops. Where more than one
port is assigned the highest priority, the port with
lowest numeric identifier will be enabled."
::= { xstInstancePortEntry 3 }
xstInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
discarding(1),
learning(2),
forwarding(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1)."
::= { xstInstancePortEntry 4}
xstInstancePortEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enabled/disabled status of the port."
::= { xstInstancePortEntry 5 }
xstInstancePortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached."
::= { xstInstancePortEntry 7 }
xstInstancePortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs."
::= { xstInstancePortEntry 8 }
xstInstancePortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment."
::= { xstInstancePortEntry 9 }
xstInstancePortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of the port on the designated
bridge for this port's segment."
::= { xstInstancePortEntry 10 }
xstInstancePortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the learning state to the forwarding state."
::= { xstInstancePortEntry 11 }
xstInstancePortPortRole OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
root(2),
designated(3),
alternate(4),
backup(5),
master(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role."
::= { xstInstancePortEntry 12 }
xstInstancePortAdminPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The admin value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 13 }
xstInstancePortOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 14 }
mstInstanceEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The instance table for the Multiple Spanning Tree region"
::= { xstMgt 6 }
mstInstanceEditEntry OBJECT-TYPE
SYNTAX MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceEditIndex }
::= { mstInstanceEditTable 1 }
MstInstanceEditEntry ::= SEQUENCE
{
mstInstanceEditIndex Integer32,
mstInstanceEditVlansMap OCTET STRING,
mstInstanceEditVlansMap2k OCTET STRING,
mstInstanceEditVlansMap3k OCTET STRING,
mstInstanceEditVlansMap4k OCTET STRING,
mstInstanceEditRemainingHops Integer32
}
mstInstanceEditIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceEditEntry 1 }
mstInstanceEditVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 2 }
mstInstanceEditVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 3 }
mstInstanceEditVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 4 }
mstInstanceEditVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 5 }
mstInstanceEditRemainingHops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remaining hop count for this MST instance."
::= { mstInstanceEditEntry 6 }
--mstInstanceOperTable
mstInstanceOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan mapped table."
::= { xstMgt 7 }
mstInstanceOperEntry OBJECT-TYPE
SYNTAX MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceOperIndex }
::= { mstInstanceOperTable 1 }
MstInstanceOperEntry ::= SEQUENCE
{
mstInstanceOperIndex Integer32,
mstInstanceOperVlansMap OCTET STRING,
mstInstanceOperVlansMap2k OCTET STRING,
mstInstanceOperVlansMap3k OCTET STRING,
mstInstanceOperVlansMap4k OCTET STRING
}
mstInstanceOperIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceOperEntry 1 }
mstInstanceOperVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 2 }
mstInstanceOperVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 3 }
mstInstanceOperVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 4 }
mstInstanceOperVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 5 }
--
-- restartMgt
--
-- Management for restarting the switch.
restartOpCodeFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of op-code file for start-up."
::= { restartMgt 1 }
restartConfigFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of configuration file for start-up."
::= { restartMgt 2 }
restartControl OBJECT-TYPE
SYNTAX INTEGER {
running(1),
warmBoot(2),
coldBoot(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to warmBoot(2) causes the device to
reinitialize itself such that neither the agent configuration
nor the protocol entity implementation is altered. Setting this
object to coldBoot(3) causes the device to reinitialize itself such
that the agent's configuration or the protocol entity implementation
may be altered. When the device is running normally, this
variable has a value of running(1)."
::= { restartMgt 3 }
--
-- mirrorMgt
--
-- Management for port mirroring.
mirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports."
::= { mirrorMgt 1 }
mirrorEntry OBJECT-TYPE
SYNTAX MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of mirrorTable."
INDEX { mirrorDestinationPort, mirrorSourcePort }
::= { mirrorTable 1 }
MirrorEntry ::= SEQUENCE
{
mirrorDestinationPort Integer32,
mirrorSourcePort Integer32,
mirrorType INTEGER,
mirrorStatus ValidStatus
}
mirrorDestinationPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 1 }
mirrorSourcePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 2 }
mirrorType OBJECT-TYPE
SYNTAX INTEGER
{
rx(1),
tx(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored."
::= { mirrorEntry 3 }
mirrorStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mirrorEntry 4 }
--
-- igmpSnoopMgt
--
-- Management for Internet Group Management Protocol (IGMP)
-- Snooping.
igmpSnoopStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. "
DEFVAL { enabled }
::= { igmpSnoopMgt 1 }
igmpSnoopQuerier OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables (disables) whether the switch acts as an IGMP
querier."
DEFVAL { enabled }
::= { igmpSnoopMgt 2 }
igmpSnoopQueryCount OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The query count from a querier, during which a response is
expected from an endstation. If a querier has sent a
number of counts defined by igmpSnoopQueryCount, but an
endstation has not responded, a countdown timer is
started using the time defined by igmpSnoopQueryMaxResponseTime.
If the countdown finishes, and the endstation still has
not responded, then that endstation is deemed to have left
the multicast group."
DEFVAL { 2 }
::= { igmpSnoopMgt 3 }
igmpSnoopQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..125)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval (in seconds) between IGMP host-query
messages sent by the switch."
DEFVAL { 125 }
::= { igmpSnoopMgt 4 }
igmpSnoopQueryMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (5..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by igmpSnoopQueryCount,
but an endstation has not responded, a countdown
timer is started using an initial value set by
igmpSnoopQueryMaxResponseTime. If the countdown
finishes, and the endstation still has not responded,
then that the endstation is deemed to have
left the multicast group."
DEFVAL { 10 }
::= { igmpSnoopMgt 5 }
igmpSnoopRouterPortExpireTime OBJECT-TYPE
SYNTAX Integer32 (300..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires."
DEFVAL { 300 }
::= { igmpSnoopMgt 6 }
igmpSnoopVersion OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IGMP version snooped"
DEFVAL { 2 }
::= { igmpSnoopMgt 7 }
igmpSnoopRouterCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current router ports."
::= { igmpSnoopMgt 8 }
igmpSnoopRouterCurrentEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for current router ports."
INDEX { igmpSnoopRouterCurrentVlanIndex }
::= {
igmpSnoopRouterCurrentTable 1 }
IgmpSnoopRouterCurrentEntry ::=
SEQUENCE {
igmpSnoopRouterCurrentVlanIndex
Unsigned32,
igmpSnoopRouterCurrentPorts
PortList,
igmpSnoopRouterCurrentStatus
PortList
}
igmpSnoopRouterCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 1 }
igmpSnoopRouterCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are current router ports, including static
router ports. Please refer to igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 2 }
igmpSnoopRouterCurrentStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterCurrentEntry 3 }
igmpSnoopRouterStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static router ports."
::= { igmpSnoopMgt 9 }
igmpSnoopRouterStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static router ports."
INDEX { igmpSnoopRouterStaticVlanIndex }
::= {
igmpSnoopRouterStaticTable 1 }
IgmpSnoopRouterStaticEntry ::=
SEQUENCE {
igmpSnoopRouterStaticVlanIndex
Unsigned32,
igmpSnoopRouterStaticPorts
PortList,
igmpSnoopRouterStaticStatus
ValidStatus
}
igmpSnoopRouterStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterStaticEntry 1 }
igmpSnoopRouterStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterStaticEntry 2 }
igmpSnoopRouterStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopRouterStaticEntry 3 }
igmpSnoopMulticastCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current multicast addresses."
::= { igmpSnoopMgt 10 }
igmpSnoopMulticastCurrentEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for current multicast addresses."
INDEX { igmpSnoopMulticastCurrentVlanIndex,
igmpSnoopMulticastCurrentIpAddress }
::= {
igmpSnoopMulticastCurrentTable 1 }
IgmpSnoopMulticastCurrentEntry ::=
SEQUENCE {
igmpSnoopMulticastCurrentVlanIndex
Unsigned32,
igmpSnoopMulticastCurrentIpAddress
IpAddress,
igmpSnoopMulticastCurrentPorts
PortList,
igmpSnoopMulticastCurrentStatus
PortList
}
igmpSnoopMulticastCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastCurrentEntry 1 }
igmpSnoopMulticastCurrentIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastCurrentEntry 2 }
igmpSnoopMulticastCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are members of a multicast group, including
static members. Please refer to igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastCurrentEntry 3 }
igmpSnoopMulticastCurrentStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static members."
::= { igmpSnoopMulticastCurrentEntry 4 }
igmpSnoopMulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static multicast addresses."
::= { igmpSnoopMgt 11 }
igmpSnoopMulticastStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static multicast addresses."
INDEX { igmpSnoopMulticastStaticVlanIndex,
igmpSnoopMulticastStaticIpAddress }
::= {
igmpSnoopMulticastStaticTable 1 }
IgmpSnoopMulticastStaticEntry ::=
SEQUENCE {
igmpSnoopMulticastStaticVlanIndex
Unsigned32,
igmpSnoopMulticastStaticIpAddress
IpAddress,
igmpSnoopMulticastStaticPorts
PortList,
igmpSnoopMulticastStaticStatus
ValidStatus
}
igmpSnoopMulticastStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastStaticEntry 1 }
igmpSnoopMulticastStaticIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastStaticEntry 2 }
igmpSnoopMulticastStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are members."
::= { igmpSnoopMulticastStaticEntry 3 }
igmpSnoopMulticastStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopMulticastStaticEntry 4 }
--
-- The IpMgt Group
--
-- Management for Internet Protocol (IP).
netDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0."
::= { ipMgt 2 }
ipHttpState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTP is enabled."
::= { ipMgt 3 }
ipHttpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTP."
::= { ipMgt 4 }
ipDhcpRestart OBJECT-TYPE
SYNTAX INTEGER
{
restart(1),
noRestart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to restart(1) the DHCP server will restart. When read,
this value always returns noRestart(2)."
::= { ipMgt 5 }
-- optional
ipHttpsState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTPS is enabled."
::= { ipMgt 6 }
ipHttpsPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTPS."
::= { ipMgt 7 }
iPAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of iPAddrEntry."
::= { ipMgt 16 }
iPAddrEntry OBJECT-TYPE
SYNTAX IPAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresponding interface."
INDEX { iPAddrIPAddress, iPAddrSubnetMask }
::= { iPAddrTable 1 }
IPAddrEntry ::= SEQUENCE {
iPAddrIPAddress IpAddress,
iPAddrSubnetMask IpAddress,
iPAddrIfIndex Integer32,
iPAddrPrimaryInterface INTEGER,
iPAddrUnnumbered INTEGER,
iPAddrStatus RowStatus
}
iPAddrIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { iPAddrEntry 1 }
iPAddrSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { iPAddrEntry 2 }
iPAddrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table."
::= { iPAddrEntry 3 }
iPAddrPrimaryInterface OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether this is a primary interface."
::= { iPAddrEntry 4 }
iPAddrUnnumbered OBJECT-TYPE
SYNTAX INTEGER
{
unnumbered(1),
notUnnumbered(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this is an unnumbered interface."
::= { iPAddrEntry 5 }
iPAddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { iPAddrEntry 6 }
--
-- bcastStormMgt
--
-- Management for broadcast storm control for ports.
bcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of broadcast storms for ports."
::= { bcastStormMgt 1 }
bcastStormEntry OBJECT-TYPE
SYNTAX BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of bcastStormTable."
INDEX { bcastStormIfIndex }
::= { bcastStormTable 1 }
BcastStormEntry ::= SEQUENCE
{
bcastStormIfIndex Integer32,
bcastStormStatus EnabledStatus,
bcastStormPktRate Integer32
}
bcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { bcastStormEntry 1 }
bcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether broadcast storm protection is enabled."
::= { bcastStormEntry 2 }
bcastStormPktRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. For a 10 Gbps port, the range
is 1042 to 262143."
::= { bcastStormEntry 4 }
--
-- vlanMgt
--
-- Management for Virtual Local Area Network (VLAN).
-- This has variables not already defined in the implemented
-- standard MIB(s).
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for VLAN configuration."
::= { vlanMgt 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for VLAN configuration."
INDEX { vlanIndex }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE
{
vlanIndex Unsigned32,
vlanAddressMethod INTEGER
}
vlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { vlanEntry 1 }
vlanAddressMethod OBJECT-TYPE
SYNTAX INTEGER
{
user(1),
bootp(2),
dhcp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Method to get the IP address."
::= { vlanEntry 2 }
vlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in VLAN."
::= { vlanMgt 2 }
vlanPortEntry OBJECT-TYPE
SYNTAX VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in VLAN."
INDEX { vlanPortIndex }
::= { vlanPortTable 1 }
VlanPortEntry ::= SEQUENCE
{
vlanPortIndex Integer32,
vlanPortMode INTEGER
}
vlanPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDGE-MIB."
::= { vlanPortEntry 1 }
vlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
hybrid(1),
dot1qTrunk(2),
access(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link."
::= { vlanPortEntry 2 }
--
-- priorityMgt
--
-- Management for traffic priority. This allows a user
-- to specify which data packets have greater precedence
-- when traffic is buffered in the switch due to congestion.
prioIpPrecDscpStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
precedence(2),
dscp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Selects whether no frame priority mapping, IP ToS
precedence mapping or DSCP mapping is performed."
::= { priorityMgt 1 }
prioIpPrecTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIpPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP precedence priority mapping."
::= { priorityMgt 2 }
prioIpPrecEntry OBJECT-TYPE
SYNTAX PrioIpPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP precedence priority mapping."
INDEX { prioIpPrecPort, prioIpPrecValue }
::= { prioIpPrecTable 1 }
PrioIpPrecEntry ::= SEQUENCE
{
prioIpPrecPort Integer32,
prioIpPrecValue Integer32,
prioIpPrecCos Integer32
}
prioIpPrecPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port or the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { prioIpPrecEntry 2 }
prioIpPrecValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Value of IP ToS Precedence as specified in the packet
header."
::= { prioIpPrecEntry 3 }
prioIpPrecCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Class of Service (CoS) as defined by
dot1dTrafficClassPriority in the P-BRIDGE-MIB.
The IP ToS precedence value in the same
table row will be mapped to this CoS. This CoS is then
further mapped to the hardware queue according to
dot1dTrafficClassTable."
REFERENCE "P-BRIDGE-MIB.dot1dPriority.dot1dTrafficClassTable."
::= { prioIpPrecEntry 4 }
prioIpPrecRestoreDefault OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables the IP Precedence settings of a port to be restored
to their default values. To reset the settings of a port,
assign prioIpPrecRestoreDefault to the value of ifIndex
defined by the ifIndex in the IF-MIB. For example, if 1 is
written to it, then the IP priorities of port 1 will be
restored to default. When read, this object always returns 0."
::= { priorityMgt 3 }
prioIpDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIpDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP DSCP priority mapping."
::= { priorityMgt 4 }
prioIpDscpEntry OBJECT-TYPE
SYNTAX PrioIpDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP DSCP priority mapping."
INDEX { prioIpDscpPort, prioIpDscpValue }
::= { prioIpDscpTable 1 }
PrioIpDscpEntry ::= SEQUENCE
{
prioIpDscpPort Integer32,
prioIpDscpValue Integer32,
prioIpDscpCos Integer32
}
prioIpDscpPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { prioIpDscpEntry 1 }
prioIpDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Value of IP DSCP as specified in the packet header."
::= { prioIpDscpEntry 2 }
prioIpDscpCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Class of Service as defined by dot1dTrafficClassPriority
in the P-BRIDGE-MIB. The prioIpDscpValue value in the same
table row will be mapped to this Class of Service (CoS).
This CoS is then further mapped to the hardware
queue according to dot1dTrafficClassTable."
REFERENCE "P-BRIDGE-MIB.dot1dPriority.dot1dTrafficClassTable."
::= { prioIpDscpEntry 3 }
prioIpDscpRestoreDefault OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables the IP DSCP settings of a port to be reset to their
defaults. To reset the IP DSCP settings of a port, assign
the value of the relevant ifIndex defined by the ifIndex in
the IF-MIB. For example, assigning the value 1 will result in
the IP DSCP settings of port 1 being restored to their default.
0 will always be obtained when reading this variable"
::= { priorityMgt 5 }
-- optional
prioIpPortEnableStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether IP Port priority look-up is enabled."
::= { priorityMgt 6 }
prioIpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP port priority mapping."
::= { priorityMgt 7 }
prioIpPortEntry OBJECT-TYPE
SYNTAX PrioIpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP port priority mapping."
INDEX { prioIpPortPhysPort,prioIpPortValue }
::= { prioIpPortTable 1 }
PrioIpPortEntry ::= SEQUENCE
{
prioIpPortPhysPort Integer32,
prioIpPortValue Integer32,
prioIpPortCos Integer32,
prioIpPortStatus ValidStatus
}
prioIpPortPhysPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port or the trunk (excluding trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { prioIpPortEntry 1 }
prioIpPortValue OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP port for this value."
::= { prioIpPortEntry 2 }
prioIpPortCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Class of service for this entry."
::= { prioIpPortEntry 3 }
prioIpPortStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry."
::= { prioIpPortEntry 4 }
-- optional
prioCopy OBJECT IDENTIFIER ::= { priorityMgt 8 }
prioCopyIpPrec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP Precedence settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 1 }
prioCopyIpDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP DSCP settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 2 }
prioCopyIpPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP Port settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 3 }
prioQueueMode OBJECT-TYPE
SYNTAX INTEGER {
wrr(1),
strict(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The global status for the prioQueue.
wrr(1),strict(2)"
::= { priorityMgt 10 }
--prioWrrPortTable
prioWrrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for per port weighted round robin (WRR)."
::= { priorityMgt 12 }
prioWrrPortEntry OBJECT-TYPE
SYNTAX PrioWrrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for per port weighted round robin (WRR)."
INDEX { prioWrrPortIfIndex,prioWrrPortTrafficClass }
::= { prioWrrPortTable 1 }
PrioWrrPortEntry ::= SEQUENCE
{
prioWrrPortIfIndex Integer32,
prioWrrPortTrafficClass Integer32,
prioWrrPortWeight Integer32
}
prioWrrPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the prioWrrPortEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { prioWrrPortEntry 1 }
prioWrrPortTrafficClass OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Traffic class for this entry, as defined in
dot1dTrafficClass in the P-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1."
REFERENCE "MIB.IETF|Q-BRIDGE-MIB.dot1dTrafficClass."
::= { prioWrrPortEntry 2 }
prioWrrPortWeight OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Weight for this entry."
::= { prioWrrPortEntry 3 }
--
-- trapDestMgt
--
-- Management for SNMP traps and trap destinations.
trapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of trap destination entries."
REFERENCE "RMON2-MIB, mib2(1).rmon(16).probeConfig(19).trapDestTable(13)."
::= { trapDestMgt 1 }
trapDestEntry OBJECT-TYPE
SYNTAX TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap."
INDEX { trapDestAddress }
::= { trapDestTable 1 }
TrapDestEntry ::= SEQUENCE {
trapDestAddress IpAddress,
trapDestCommunity DisplayString,
trapDestStatus ValidStatus,
trapDestVersion INTEGER,
trapDestUdpPort Integer32
}
trapDestAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address to send traps."
::= { trapDestEntry 1 }
trapDestCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A community to which this destination address belongs."
::= { trapDestEntry 2 }
trapDestStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { trapDestEntry 3 }
trapDestVersion OBJECT-TYPE
SYNTAX INTEGER
{
version1(1),
version2(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Determines the version of the trap that is to be sent to the
trap receiver. If the value is 1, then an SNMP version 1 trap
is sent and if the value is 2, an SNMP version 2 trap is
sent."
::= { trapDestEntry 4}
trapDestUdpPort OBJECT-TYPE
SYNTAX Integer32 ( 1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Determines the UDP port number that the trap will be sent to."
DEFVAL { 162 }
::= { trapDestEntry 5}
-- trapVar is for binding variables for traps, there is no value when
-- no trap is sent.
trapVar OBJECT IDENTIFIER ::= { trapDestMgt 2 }
trapIpFilterRejectMode OBJECT-TYPE
SYNTAX INTEGER
{
web(1),
snmp(2),
telnet(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3)."
::= { trapVar 6 }
trapIpFilterRejectIp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the IP address that rejected by the ipfilter."
::= { trapVar 7 }
--
-- qosMgt
--
-- Management for Quality of Service (QoS) for network traffic.
--
-- rateLimitMgt
--
-- optional
rateLimitMgt OBJECT IDENTIFIER ::= { qosMgt 1 }
rateLimitPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for rate limit of each port."
::= { rateLimitMgt 2 }
rateLimitPortEntry OBJECT-TYPE
SYNTAX RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for rate limit of each port."
INDEX { rlPortIndex }
::= { rateLimitPortTable 1 }
RateLimitPortEntry ::= SEQUENCE
{
rlPortIndex Integer32,
rlPortInputLimit Integer32,
rlPortOutputLimit Integer32,
rlPortInputStatus EnabledStatus,
rlPortOutputStatus EnabledStatus
}
rlPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { rateLimitPortEntry 1 }
-- non ACD
rlPortInputLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the input rate limit. Its unit is megabits per
second. For a 100 Mbps port, the range is 1 to 100.
For a 1000 Mbps port, the range is 1 to 1000.
For a 10 Gbps port, the range is 1 to 10000."
::= { rateLimitPortEntry 2 }
-- non ACD
rlPortOutputLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the output rate limit. Its unit is megabits per
second. For a 100 Mbps port, the range is 1 to 100.
For a 1000 Mbps port, the range is 1 to 1000.
For a 10 Gbps port, the range is 1 to 10000."
::= { rateLimitPortEntry 3 }
-- all need (both acd and non-acd)
rlPortInputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether input rate limit is enabled for this port."
::= { rateLimitPortEntry 6 }
-- all need (both acd and non-acd)
rlPortOutputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether output rate limit is enabled for this port."
::= { rateLimitPortEntry 7 }
--
--markerMgt
--
markerMgt OBJECT IDENTIFIER ::= { qosMgt 2 }
markerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarkerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The marker table."
::= { markerMgt 1 }
markerEntry OBJECT-TYPE
SYNTAX MarkerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for marker table."
INDEX { markerIfIndex,markerAclName }
::= { markerTable 1 }
MarkerEntry ::= SEQUENCE
{
markerIfIndex Integer32,
markerAclName DisplayString,
markerActionBitList BITS,
markerDscp Integer32,
markerPrecedence Integer32,
markerPriority Integer32,
markerStatus RowStatus
}
markerIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface index of the marker table.
The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { markerEntry 1 }
markerAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an ACL. Within a feature a unique
name is used to identify the list to which
the entry belongs in the device."
::= { markerEntry 2 }
markerActionBitList OBJECT-TYPE
SYNTAX BITS
{
dscp(0),
precedence(1),
priority(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The marker action bit list,
in right to left order.
for example:
0x3(11 in binary) means dscp(0) and precedence(1)
0x4(100 in binary) means priority(2)."
::= { markerEntry 3 }
markerDscp OBJECT-TYPE
SYNTAX Integer32(0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The DSCP value of the marker entry."
::= { markerEntry 4 }
markerPrecedence OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The precedence value of the marker entry."
::= { markerEntry 5 }
markerPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The priority value of the marker entry."
::= { markerEntry 6 }
markerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { markerEntry 7 }
cosMgt OBJECT IDENTIFIER ::= { qosMgt 3 }
--prioAclToCosMappingTable
prioAclToCosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioAclToCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for ACL to CoS Mapping."
::= { cosMgt 1 }
prioAclToCosMappingEntry OBJECT-TYPE
SYNTAX PrioAclToCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for ACL to CoS Mapping."
INDEX { prioAclToCosMappingIfIndex, prioAclToCosMappingAclName }
::= { prioAclToCosMappingTable 1 }
PrioAclToCosMappingEntry ::= SEQUENCE
{
prioAclToCosMappingIfIndex Integer32,
prioAclToCosMappingAclName DisplayString,
prioAclToCosMappingCosValue Integer32,
prioAclToCosMappingStatus RowStatus
}
prioAclToCosMappingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the prioAclToCosMappingEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { prioAclToCosMappingEntry 1 }
prioAclToCosMappingAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an IP ACL. Within a feature a unique name is
used to identify the list to which the entry belongs
in the device."
::= { prioAclToCosMappingEntry 2 }
prioAclToCosMappingCosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "CoS value of the prioAclToCosMappingTable."
::= { prioAclToCosMappingEntry 3 }
prioAclToCosMappingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { prioAclToCosMappingEntry 4 }
--
--diffServMgt
--
--
-- securityMgt
--
-- Management for security, e.g. user security and port security.
privateVlanMgt OBJECT IDENTIFIER ::= { securityMgt 1 }
portSecurityMgt OBJECT IDENTIFIER ::= { securityMgt 2 }
radiusMgt OBJECT IDENTIFIER ::= { securityMgt 4 }
tacacsMgt OBJECT IDENTIFIER ::= { securityMgt 5 }
sshMgt OBJECT IDENTIFIER ::= { securityMgt 6 }
aclMgt OBJECT IDENTIFIER ::= { securityMgt 7 }
ipFilterMgt OBJECT IDENTIFIER ::= { securityMgt 9 }
--
-- PrivateVlanMgt
--
-- Management for Private VLAN.
--SYS_CPNT_PORT_TRAFFIC_SEGMENTATION(use SWCTRL api) start
privateVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This controls whether private VLAN is enabled."
::= { privateVlanMgt 1 }
privateVlanUplinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of uplink ports for private VLAN.
They should not overlap with privateVlanDownlinkPorts.
Only one port can be set, no multiple ports.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 2 }
privateVlanDownlinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of downlink ports for private VLAN.
They should not overlap with privateVlanUplinkPorts.
Multiple port setting is permitted.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 3 }
--SYS_CPNT_PORT_TRAFFIC_SEGMENTATION(use SWCTRL api) end
-- PortSecurityMgt
-- Management for Port Security. A secure port only allows
-- secure MAC addresses to come in.
portSecPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port security(MAC binding) Table."
::= { portSecurityMgt 1 }
portSecPortEntry OBJECT-TYPE
SYNTAX PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of portSecPortTable."
INDEX { portSecPortIndex }
::= { portSecPortTable 1 }
PortSecPortEntry ::= SEQUENCE
{
portSecPortIndex Integer32,
portSecPortStatus EnabledStatus,
portSecAction INTEGER,
portSecMaxMacCount Integer32
}
portSecPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portSecPortEntry 1 }
portSecPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable port security and set disabled(2) to
disable port security."
::= { portSecPortEntry 2 }
portSecAction OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
trap(2),
shutdown(3),
trapAndShutdown(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be sent,
when this variable is set to shutdown(3), the port will
shutdown, when this variable is set to
trapAndShutdown(4), a swPortSecurityTrap will be sent
and the port will shutdown."
::= { portSecPortEntry 3 }
portSecMaxMacCount OBJECT-TYPE
SYNTAX Integer32(0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the number of MAC has reached
this value, and only the secure MAC addresses can enter
this port. If the portSecPortStatus is disabled, we will begin
to learn the MAC, and auto enabled the portSecPortStatus when
the MAC has reached this value."
::= { portSecPortEntry 4 }
--
-- radiusMgt
--
-- Management for Remote Authentication Dial-In User Service (RADIUS).
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS=1: single server
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS>1: multiple server
radiusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of RADIUS server."
::= { radiusMgt 1 }
radiusServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP port number of RADIUS server."
::= { radiusMgt 2 }
radiusServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be set.
When this variable is read, it always returns a
zero-length string."
::= { radiusMgt 3 }
radiusServerRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Maximum number of retransmissions for RADIUS."
::= { radiusMgt 4 }
radiusServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusMgt 5 }
--radiusMultipleServerTable
radiusMultipleServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusMultipleServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for multiple RADIUS server."
::= { radiusMgt 7 }
radiusMultipleServerEntry OBJECT-TYPE
SYNTAX RadiusMultipleServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for radiusMultipleServerTable."
INDEX { radiusMultipleServerIndex }
::= { radiusMultipleServerTable 1 }
RadiusMultipleServerEntry ::= SEQUENCE
{
radiusMultipleServerIndex Integer32,
radiusMultipleServerAddress IpAddress,
radiusMultipleServerPortNumber Integer32,
radiusMultipleServerKey DisplayString,
radiusMultipleServerRetransmit Integer32,
radiusMultipleServerTimeout Integer32,
radiusMultipleServerStatus ValidStatus
}
radiusMultipleServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The RADIUS multiple server index."
::= { radiusMultipleServerEntry 1 }
radiusMultipleServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address of a multiple RADIUS server."
::= { radiusMultipleServerEntry 2 }
radiusMultipleServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP port number of a multiple RADIUS server."
::= { radiusMultipleServerEntry 3 }
radiusMultipleServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be set.
When this variable is read, it always returns a
zero-length string."
::= { radiusMultipleServerEntry 4 }
radiusMultipleServerRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Maximum number of retransmissions for RADIUS."
::= { radiusMultipleServerEntry 5 }
radiusMultipleServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusMultipleServerEntry 6 }
radiusMultipleServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { radiusMultipleServerEntry 8 }
--
-- tacacsMgt
--
-- Management for Terminal Access Controller Access Control System plus (TACACS+).
tacacsServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of TACACS server."
::= { tacacsMgt 1 }
tacacsServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP port number of TACACS server."
::= { tacacsMgt 2 }
tacacsServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The encryption key used to authenticate logon access
for the client using TACAS. Do not use blank spaces
in the string. This variable can only be set.
When this variable is read, it always returns a zero-length string."
::= { tacacsMgt 3 }
--
-- sshMgt
--
-- Management for Secure Shell Configuration
sshServerStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of Secure Shell Server. Set this value to
enabled(1) to enable SSH server, set this value to
disabled(2) to disable the SSH server."
::= { sshMgt 1 }
sshServerMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The major version of the SSH Server."
::= { sshMgt 2 }
sshServerMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minor version of the SSH Server."
::= { sshMgt 3 }
sshTimeout OBJECT-TYPE
SYNTAX INTEGER(1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time interval that the router waits for the SSH
client to respond. The range is 1-120."
::= { sshMgt 4 }
sshAuthRetries OBJECT-TYPE
SYNTAX INTEGER(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of attempts after which the interface is reset.
The range is 1-5."
::= { sshMgt 5 }
sshConnInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for Secure Shell Connection."
::= { sshMgt 6 }
sshConnInfoEntry OBJECT-TYPE
SYNTAX SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshConnInfoTable."
INDEX { sshConnID }
::= { sshConnInfoTable 1 }
SshConnInfoEntry ::= SEQUENCE
{
--both sshv1 & sshv2 start
sshConnID Integer32,
sshConnMajorVersion Integer32,
sshConnMinorVersion Integer32,
sshConnStatus INTEGER,
--both sshv1 & sshv2 end
--both sshv1 & sshv2 start
sshConnUserName DisplayString,
sshDisconnect INTEGER,
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr DisplayString
--sshv2 only end
}
--both sshv1 & sshv2 start
sshConnID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The connection ID of the Secure Shell Connection."
::= { sshConnInfoEntry 1 }
sshConnMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH major version."
::= { sshConnInfoEntry 2 }
sshConnMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH minor version."
::= { sshConnInfoEntry 3 }
sshConnStatus OBJECT-TYPE
SYNTAX INTEGER
{
negotiationStart(1),
authenticationStart(2),
sessionStart(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start State."
::= { sshConnInfoEntry 5 }
--both sshv1 & sshv2 end
sshConnUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user name of the connection."
::= { sshConnInfoEntry 6 }
sshDisconnect OBJECT-TYPE
SYNTAX INTEGER
{
noDisconnect(1),
disconnect(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable."
::= { sshConnInfoEntry 7 }
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The encryption type of the SSH."
::= { sshConnInfoEntry 8 }
sshKeySize OBJECT-TYPE
SYNTAX INTEGER(512..896)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SSH server key size."
::= { sshMgt 7 }
sshRsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 1."
::= { sshMgt 8 }
sshRsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 2."
::= { sshMgt 9 }
sshRsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 3."
::= { sshMgt 10 }
sshRsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 4."
::= { sshMgt 11 }
sshRsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 5."
::= { sshMgt 12 }
sshRsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 6."
::= { sshMgt 13 }
sshRsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 7."
::= { sshMgt 14 }
sshRsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 8."
::= { sshMgt 15 }
sshDsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 1."
::= { sshMgt 16 }
sshDsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 2."
::= { sshMgt 17 }
sshDsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 3."
::= { sshMgt 18 }
sshDsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 4."
::= { sshMgt 19 }
sshDsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 5."
::= { sshMgt 20 }
sshDsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 6."
::= { sshMgt 21 }
sshDsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 7."
::= { sshMgt 22 }
sshDsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 8."
::= { sshMgt 23 }
sshHostKeyGenAction OBJECT-TYPE
SYNTAX INTEGER
{
noGen(1),
genRsaKey(2),
genDsaKey(3),
genBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable is for host key generating.
For the set behavior:
Set it to genRsaKey(2) to generate the RSA host key,
and to genDsaKey(3) to generate the DSA host key,
if genBothKeys(4) is set, both RSA and DSA host key are
generated.
For the get behavior:
You will get genRsaKey(2), genDsaKey(3) or
genBothKeys(4) when the key gen action is in progress.
otherwise, you will get noGen(1)."
::= { sshMgt 24 }
sshHostKeyGenStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last KeyGen status.
if no key gen action has been performed.
you will get unknown(1) status."
::= { sshMgt 25 }
sshHostKeySaveAction OBJECT-TYPE
SYNTAX INTEGER
{
noSave(1),
save(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To save host key from memory to flash.
For the set behavior:
Set it to save(2) to perform the save operation.
For the get behavior:
You will get save(1) when the save action is in progress.
Otherwise, you will get noSave(1)."
::= { sshMgt 26 }
sshHostKeySaveStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last savekey status.
If no save action has been performed,
you will get unknown(1) status."
::= { sshMgt 27 }
sshHostKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the host key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA host key,
to delDsaKey(3) to delete the DSA host key,
or to delBothKeys(4) to delete both RSA and DSA host key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshMgt 28 }
sshUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of sshUserEntry."
::= { sshMgt 29 }
sshUserEntry OBJECT-TYPE
SYNTAX SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshUserTable."
INDEX { IMPLIED sshUserName}
::= { sshUserTable 1 }
SshUserEntry ::= SEQUENCE
{
sshUserName DisplayString,
sshUserRsaKey1 KeySegment,
sshUserRsaKey2 KeySegment,
sshUserRsaKey3 KeySegment,
sshUserRsaKey4 KeySegment,
sshUserRsaKey5 KeySegment,
sshUserRsaKey6 KeySegment,
sshUserRsaKey7 KeySegment,
sshUserRsaKey8 KeySegment,
sshUserDsaKey1 KeySegment,
sshUserDsaKey2 KeySegment,
sshUserDsaKey3 KeySegment,
sshUserDsaKey4 KeySegment,
sshUserDsaKey5 KeySegment,
sshUserDsaKey6 KeySegment,
sshUserDsaKey7 KeySegment,
sshUserDsaKey8 KeySegment,
sshUserKeyDelAction INTEGER
}
sshUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User Name."
::= { sshUserEntry 1 }
sshUserRsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 1."
::= { sshUserEntry 2 }
sshUserRsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 2."
::= { sshUserEntry 3 }
sshUserRsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 3."
::= { sshUserEntry 4 }
sshUserRsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 4."
::= { sshUserEntry 5 }
sshUserRsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 5."
::= { sshUserEntry 6 }
sshUserRsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 6."
::= { sshUserEntry 7 }
sshUserRsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 7."
::= { sshUserEntry 8 }
sshUserRsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 8."
::= { sshUserEntry 9 }
sshUserDsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 1."
::= { sshUserEntry 10 }
sshUserDsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 2."
::= { sshUserEntry 11 }
sshUserDsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 3."
::= { sshUserEntry 12 }
sshUserDsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 4."
::= { sshUserEntry 13 }
sshUserDsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 5."
::= { sshUserEntry 14 }
sshUserDsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 6."
::= { sshUserEntry 15 }
sshUserDsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 7."
::= { sshUserEntry 16 }
sshUserDsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 8."
::= { sshUserEntry 17 }
sshUserKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the user key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA user key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshUserEntry 18 }
--
-- aclMgt
--
--aclIpAceTable
aclIpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclIpAceEntry."
::= { aclMgt 1 }
aclIpAceEntry OBJECT-TYPE
SYNTAX AclIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIpAceTable."
INDEX { aclIpAceName, aclIpAceIndex }
::= { aclIpAceTable 1 }
AclIpAceEntry ::= SEQUENCE
{
aclIpAceName DisplayString,
aclIpAceIndex Integer32,
aclIpAcePrecedence Integer32,
aclIpAceAction INTEGER,
aclIpAceSourceIpAddr IpAddress,
aclIpAceSourceIpAddrBitmask IpAddress,
aclIpAceDestIpAddr IpAddress,
aclIpAceDestIpAddrBitmask IpAddress,
aclIpAceProtocol Integer32,
aclIpAcePrec Integer32,
aclIpAceTos Integer32,
aclIpAceDscp Integer32,
aclIpAceSourcePortOp INTEGER,
aclIpAceMinSourcePort Integer32,
aclIpAceMaxSourcePort Integer32,
aclIpAceSourcePortBitmask Integer32,
aclIpAceDestPortOp INTEGER,
aclIpAceMinDestPort Integer32,
aclIpAceMaxDestPort Integer32,
aclIpAceDestPortBitmask Integer32,
aclIpAceControlCode Integer32,
aclIpAceControlCodeBitmask Integer32,
aclIpAceStatus RowStatus
}
aclIpAceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an ACL. Within a feature a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclIpAceEntry 1 }
aclIpAceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of an ACE within an ACL."
::= { aclIpAceEntry 2 }
aclIpAcePrecedence OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the IP precedence value to be matched against.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1)."
::= { aclIpAceEntry 3 }
aclIpAceAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1)."
::= { aclIpAceEntry 4 }
aclIpAceSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address. The packet's source address is
AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1)."
::= { aclIpAceEntry 5 }
aclIpAceSourceIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address mask. The packet's destination
address is AND-ed with the value of aclIpAceSourceIpAddr and then
compared against the value of this object."
::= { aclIpAceEntry 6 }
aclIpAceDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address.
The packet's destination address is
AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared
against the value of this object."
::= { aclIpAceEntry 7 }
aclIpAceDestIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address mask."
::= { aclIpAceEntry 8 }
aclIpAceProtocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 0 matches every IP packet. The object=256, means 'any'
For example :
0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH,
88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP,
103 is PIMv2, 108 is PCP. "
::= { aclIpAceEntry 9 }
aclIpAcePrec OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the IP precedence value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec object is 8."
::= { aclIpAceEntry 10 }
aclIpAceTos OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the IP ToS facility value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec object is 9."
::= { aclIpAceEntry 11 }
aclIpAceDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the DSCP value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec object is 64."
::= { aclIpAceEntry 12 }
aclIpAceSourcePortOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number."
::= { aclIpAceEntry 13 }
aclIpAceMinSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceSourcePortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 14 }
aclIpAceMaxSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceSourcePortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 15 }
aclIpAceSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceSourcePortOp is equal(2),
this indicates the bitmask of the aclIpAceMinSourcePort."
::= { aclIpAceEntry 16 }
aclIpAceDestPortOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means that no
comparison is to be made with the destination TCP/UDP port
number."
::= { aclIpAceEntry 17 }
aclIpAceMinDestPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceDestPortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 18 }
aclIpAceMaxDestPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceDestPortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range."
::= { aclIpAceEntry 19 }
aclIpAceDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the aclIpAceDestPortOp is equal(2),
this indicates the bitmask of the aclIpAceMinDestPort."
::= { aclIpAceEntry 20 }
aclIpAceControlCode OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
aceIpControlCode is AND-ed with aceIpControlCodeBitmask."
::= { aclIpAceEntry 21 }
aclIpAceControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
It can be used to check multiple flags of the
FIN, SYN, RST, PSH, ACK, URG by the sum of
FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32."
::= { aclIpAceEntry 22 }
aclIpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclIpAceEntry 23 }
-- aclMacAceTable
aclMacAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclMacAceEntry."
::= { aclMgt 2 }
aclMacAceEntry OBJECT-TYPE
SYNTAX AclMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclMacAceTable. "
INDEX { aclMacAceName, aclMacAceIndex }
::= { aclMacAceTable 1 }
AclMacAceEntry ::= SEQUENCE
{
aclMacAceName DisplayString,
aclMacAceIndex Integer32,
aclMacAcePrecedence Integer32,
aclMacAceAction INTEGER,
aclMacAcePktformat INTEGER,
aclMacAceSourceMacAddr OCTET STRING,
aclMacAceSourceMacAddrBitmask OCTET STRING,
aclMacAceDestMacAddr OCTET STRING,
aclMacAceDestMacAddrBitmask OCTET STRING,
aclMacAceVidOp INTEGER,
aclMacAceMinVid Integer32,
aclMacAceVidBitmask Integer32,
aclMacAceMaxVid Integer32,
aclMacAceEtherTypeOp INTEGER,
aclMacAceEtherTypeBitmask Integer32,
aclMacAceMinEtherType Integer32,
aclMacAceMaxEtherType Integer32,
aclMacAceStatus RowStatus
}
aclMacAceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclMacAceEntry 1 }
aclMacAceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of an ACE within an ACL."
::= { aclMacAceEntry 2 }
aclMacAcePrecedence OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the entry's precedence."
::= { aclMacAceEntry 3 }
aclMacAceAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 4 }
aclMacAcePktformat OBJECT-TYPE
SYNTAX INTEGER
{
any(1),
untagged-Eth2(2),
untagged802Dot3(3),
tagggedEth2(4),
tagged802Dot3(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to check the packet format of the packets.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 5 }
aclMacAceSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address.
The specified source MAC of the packet The packet's source MAC
address is AND-ed with the value of aceMacSourceMacAddrBitmask
and then compared against the value of this object. This object
cannot be configured when the status of the entry,
aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 6 }
aclMacAceSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 7 }
aclMacAceDestMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is
AND-ed with the value of aceMacDestMacAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 8 }
aclMacAceDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 9 }
aclMacAceVidOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's vid is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 10 }
aclMacAceMinVid OBJECT-TYPE
SYNTAX Integer32 (1..4093)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 11 }
aclMacAceVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff."
::= { aclMacAceEntry 12 }
aclMacAceMaxVid OBJECT-TYPE
SYNTAX Integer32 (1..4093)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the upper bound of the vid value range if the aclMacAceVidOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 13 }
aclMacAceEtherTypeOp OBJECT-TYPE
SYNTAX INTEGER
{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's ethertype is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 14 }
aclMacAceEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bitmask of vid if the aclMacAceVidOp is equal(2) , default value is 0xFFFF."
::= { aclMacAceEntry 15 }
aclMacAceMinEtherType OBJECT-TYPE
SYNTAX Integer32 (1536..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 16 }
aclMacAceMaxEtherType OBJECT-TYPE
SYNTAX Integer32 (1536..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the upper bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1)."
::= { aclMacAceEntry 17 }
aclMacAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclMacAceEntry 18 }
--aclAclGroupTable
aclAclGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclAclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclAclGroupEntry."
::= { aclMgt 3 }
aclAclGroupEntry OBJECT-TYPE
SYNTAX AclAclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclAclGroupTable."
INDEX { aclAclGroupIfIndex }
::= { aclAclGroupTable 1 }
AclAclGroupEntry ::= SEQUENCE
{
aclAclGroupIfIndex Integer32,
aclAclGroupIngressIpAcl DisplayString,
aclAclGroupEgressIpAcl DisplayString,
aclAclGroupIngressMacAcl DisplayString,
aclAclGroupEgressMacAcl DisplayString
}
aclAclGroupIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface number specifying the ACL binding to."
::= { aclAclGroupEntry 1 }
aclAclGroupIngressIpAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ingress IP ACL(standard or extended) binding to the interface."
::= { aclAclGroupEntry 2 }
aclAclGroupEgressIpAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the egress IP ACL(standard or extended) binding to the interface."
::= { aclAclGroupEntry 3 }
aclAclGroupIngressMacAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ingress MAC ACL binding to the interface."
::= { aclAclGroupEntry 4 }
aclAclGroupEgressMacAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the egress MAC ACL binding to the interface."
::= { aclAclGroupEntry 5 }
--aclIngressIpMaskTable
aclIngressIpMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIngressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclIngressIpMaskEntry."
::= { aclMgt 4 }
aclIngressIpMaskEntry OBJECT-TYPE
SYNTAX AclIngressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIngressIpMaskTable."
INDEX { aclIngressIpMaskIndex }
::= { aclIngressIpMaskTable 1 }
AclIngressIpMaskEntry ::= SEQUENCE
{
aclIngressIpMaskIndex Integer32,
aclIngressIpMaskPrecedence Integer32,
aclIngressIpMaskIsEnableTos EnabledStatus,
aclIngressIpMaskIsEnableDscp EnabledStatus,
aclIngressIpMaskIsEnablePrecedence EnabledStatus,
aclIngressIpMaskIsEnableProtocol EnabledStatus,
aclIngressIpMaskSourceIpAddrBitmask Unsigned32,
aclIngressIpMaskDestIpAddrBitmask Unsigned32,
aclIngressIpMaskSourcePortBitmask Integer32,
aclIngressIpMaskDestPortBitmask Integer32,
aclIngressIpMaskControlCodeBitmask Integer32,
aclIngressIpMaskStatus RowStatus
}
aclIngressIpMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the bitmask of the source IP address. The relative
bitmask must be created before the ACE binds to the interface.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 1 }
aclIngressIpMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether to check the IP precedence against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured
when the status of the entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 2 }
aclIngressIpMaskIsEnableTos OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP ToS facility against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 3 }
aclIngressIpMaskIsEnableDscp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 4 }
aclIngressIpMaskIsEnablePrecedence OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP precednce against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 5 }
aclIngressIpMaskIsEnableProtocol OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 6 }
aclIngressIpMaskSourceIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 7 }
aclIngressIpMaskDestIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 8 }
aclIngressIpMaskSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 9 }
aclIngressIpMaskDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 10 }
aclIngressIpMaskControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the control code bitmask to check against the TCP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is active(1)."
::= { aclIngressIpMaskEntry 11 }
aclIngressIpMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclIngressIpMaskEntry 12 }
--aclEgressIpMaskTable
aclEgressIpMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclEgressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclEgressIpMaskEntry."
::= { aclMgt 5 }
aclEgressIpMaskEntry OBJECT-TYPE
SYNTAX AclEgressIpMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclEgressIpMaskTable."
INDEX { aclEgressIpMaskIndex }
::= { aclEgressIpMaskTable 1 }
AclEgressIpMaskEntry ::= SEQUENCE
{
aclEgressIpMaskIndex Integer32,
aclEgressIpMaskPrecedence Integer32,
aclEgressIpMaskIsEnableTos EnabledStatus,
aclEgressIpMaskIsEnableDscp EnabledStatus,
aclEgressIpMaskIsEnablePrecedence EnabledStatus,
aclEgressIpMaskIsEnableProtocol EnabledStatus,
aclEgressIpMaskSourceIpAddrBitmask Unsigned32,
aclEgressIpMaskDestIpAddrBitmask Unsigned32,
aclEgressIpMaskSourcePortBitmask Integer32,
aclEgressIpMaskDestPortBitmask Integer32,
aclEgressIpMaskControlCodeBitmask Integer32,
aclEgressIpMaskStatus RowStatus
}
aclEgressIpMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a mask entry within a mask table."
::= { aclEgressIpMaskEntry 1 }
aclEgressIpMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The created precedence of an mask entry within the mask table."
::= { aclEgressIpMaskEntry 2 }
aclEgressIpMaskIsEnableTos OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP ToS facility against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 3 }
aclEgressIpMaskIsEnableDscp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 4 }
aclEgressIpMaskIsEnablePrecedence OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP precedence against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 5 }
aclEgressIpMaskIsEnableProtocol OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE binds to
the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 6 }
aclEgressIpMaskSourceIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 7 }
aclEgressIpMaskDestIpAddrBitmask OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 8 }
aclEgressIpMaskSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 9 }
aclEgressIpMaskDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before
the ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 10 }
aclEgressIpMaskControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the control code bitmask to check against the TCP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry, aclEgressIpMaskStatus, is active(1)."
::= { aclEgressIpMaskEntry 11 }
aclEgressIpMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclEgressIpMaskEntry 12 }
--aclIngressMacMaskTable
aclIngressMacMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIngressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclIngressMacMaskEntry."
::= { aclMgt 6 }
aclIngressMacMaskEntry OBJECT-TYPE
SYNTAX AclIngressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIngressMacMaskTable."
INDEX { aclIngressMacMaskIndex }
::= { aclIngressMacMaskTable 1 }
AclIngressMacMaskEntry ::= SEQUENCE
{
aclIngressMacMaskIndex Integer32,
aclIngressMacMaskPrecedence Integer32,
aclIngressMacMaskSourceMacAddrBitmask OCTET STRING,
aclIngressMacMaskDestMacAddrBitmask OCTET STRING,
aclIngressMacMaskVidBitmask Integer32,
aclIngressMacMaskEtherTypeBitmask Integer32,
aclIngressMacMaskIsEnablePktformat EnabledStatus,
aclIngressMacMaskStatus RowStatus
}
aclIngressMacMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of an mask entry within an ingress mask table."
::= { aclIngressMacMaskEntry 1 }
aclIngressMacMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The created order of an mask entry within an ingress mask table."
::= { aclIngressMacMaskEntry 2 }
aclIngressMacMaskSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 3 }
aclIngressMacMaskDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 4 }
aclIngressMacMaskVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the vid bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 5 }
aclIngressMacMaskEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the ethertype bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 6 }
aclIngressMacMaskIsEnablePktformat OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the packet format against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclIngressMacMaskStatus, is active(1)."
::= { aclIngressMacMaskEntry 7 }
aclIngressMacMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclIngressMacMaskEntry 8 }
--aclEgressMacMaskTable
aclEgressMacMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclEgressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of aclEgressMacMaskEntry."
::= { aclMgt 7 }
aclEgressMacMaskEntry OBJECT-TYPE
SYNTAX AclEgressMacMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclEgressMacMaskTable."
INDEX { aclEgressMacMaskIndex }
::= { aclEgressMacMaskTable 1 }
AclEgressMacMaskEntry ::= SEQUENCE
{
aclEgressMacMaskIndex Integer32,
aclEgressMacMaskPrecedence Integer32,
aclEgressMacMaskSourceMacAddrBitmask OCTET STRING,
aclEgressMacMaskDestMacAddrBitmask OCTET STRING,
aclEgressMacMaskVidBitmask Integer32,
aclEgressMacMaskEtherTypeBitmask Integer32,
aclEgressMacMaskIsEnablePktformat EnabledStatus,
aclEgressMacMaskStatus RowStatus
}
aclEgressMacMaskIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a mask entry within an egress mask table."
::= { aclEgressMacMaskEntry 1 }
aclEgressMacMaskPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The created precedence of a mask entry within an egress mask table."
::= { aclEgressMacMaskEntry 2 }
aclEgressMacMaskSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the source MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 3 }
aclEgressMacMaskDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the destination MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 4 }
aclEgressMacMaskVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the vid bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 5 }
aclEgressMacMaskEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the ethertype bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 6 }
aclEgressMacMaskIsEnablePktformat OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to check the packet format against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, aclEgressMacMaskStatus, is active(1)."
::= { aclEgressMacMaskEntry 7 }
aclEgressMacMaskStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { aclEgressMacMaskEntry 8 }
--aclIpTable
aclIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclIpEntry."
::= { aclMgt 8 }
aclIpEntry OBJECT-TYPE
SYNTAX AclIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclIpTable."
INDEX { aclIpAclName }
::= { aclIpTable 1 }
AclIpEntry ::= SEQUENCE
{
aclIpAclName DisplayString
}
aclIpAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclIpEntry 1 }
--aclMacTable
aclMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of aclMacEntry."
::= { aclMgt 9 }
aclMacEntry OBJECT-TYPE
SYNTAX AclMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for aclMacTable."
INDEX { aclMacAclName }
::= { aclMacTable 1 }
AclMacEntry ::= SEQUENCE
{
aclMacAclName DisplayString
}
aclMacAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device."
::= { aclMacEntry 1 }
--
-- ipFilterMgt
--
--ipFilterSnmpTable
ipFilterSnmpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterSnmpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 1 }
ipFilterSnmpEntry OBJECT-TYPE
SYNTAX IpFilterSnmpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through SNMP."
INDEX { ipFilterSnmpStartAddress }
::= { ipFilterSnmpTable 1 }
IpFilterSnmpEntry ::= SEQUENCE {
ipFilterSnmpStartAddress IpAddress,
ipFilterSnmpEndAddress IpAddress,
ipFilterSnmpStatus ValidStatus
}
ipFilterSnmpStartAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterSnmpEntry 1 }
ipFilterSnmpEndAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterSnmpEntry 2 }
ipFilterSnmpStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterSnmpEntry 3 }
--ipFilterHTTPTable
ipFilterHTTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterHTTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 2 }
ipFilterHTTPEntry OBJECT-TYPE
SYNTAX IpFilterHTTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through SNMP."
INDEX { ipFilterHTTPStartAddress }
::= { ipFilterHTTPTable 1 }
IpFilterHTTPEntry ::= SEQUENCE {
ipFilterHTTPStartAddress IpAddress,
ipFilterHTTPEndAddress IpAddress,
ipFilterHTTPStatus ValidStatus
}
ipFilterHTTPStartAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterHTTPEntry 1 }
ipFilterHTTPEndAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterHTTPEntry 2 }
ipFilterHTTPStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterHTTPEntry 3 }
--ipFilterTelnetTable
ipFilterTelnetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterTelnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 3 }
ipFilterTelnetEntry OBJECT-TYPE
SYNTAX IpFilterTelnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow them to connect to this device through SNMP."
INDEX { ipFilterTelnetStartAddress }
::= { ipFilterTelnetTable 1 }
IpFilterTelnetEntry ::= SEQUENCE {
ipFilterTelnetStartAddress IpAddress,
ipFilterTelnetEndAddress IpAddress,
ipFilterTelnetStatus ValidStatus
}
ipFilterTelnetStartAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterTelnetEntry 1 }
ipFilterTelnetEndAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterTelnetEntry 2 }
ipFilterTelnetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterTelnetEntry 3 }
--
-- layer3Mgt
--
-- Management for layer 3 settings and protocols.
arpMgt OBJECT IDENTIFIER ::= { layer3Mgt 1 }
ripMgt OBJECT IDENTIFIER ::= { layer3Mgt 2 }
ospfMgt OBJECT IDENTIFIER ::= { layer3Mgt 3 }
dvmrpMgt OBJECT IDENTIFIER ::= { layer3Mgt 4 }
routeMgt OBJECT IDENTIFIER ::= { layer3Mgt 5 }
-- arpMgt
arpCacheDeleteAll OBJECT-TYPE
SYNTAX INTEGER
{
delete(1),
noDelete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete all dynamic entries in the ARP cache,
write this variable to delete(1). Writing this variable
to noDelete(2) has no effect on the device. When
read, this variable always returns noDelete(2)."
::= { arpMgt 1 }
arpCacheTimeout OBJECT-TYPE
SYNTAX Integer32(300..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout is provided for entries in the
ARP Cache. It is for dynamic mapping only.
Static mapping by creating an entry
that associates a logical address with a physical
address is never aged out."
::= { arpMgt 2 }
arpTrafficStatistics OBJECT IDENTIFIER ::= { arpMgt 3 }
arpStatSendRequestPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ARP Request packets sent by
the ARP process."
::= { arpTrafficStatistics 1 }
arpStatRcvRequestPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ARP Request packets received by
the ARP process."
::= { arpTrafficStatistics 2 }
arpStatSendReplyPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ARP Reply packets sent by
the ARP process."
::= { arpTrafficStatistics 3 }
arpStatRcvReplyPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ARP Reply packets received by
the ARP process."
::= { arpTrafficStatistics 4 }
arpProxyArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpProxyArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of Proxy ARP status. This table has entries
for all static VLANs."
::= { arpMgt 4 }
arpProxyArpEntry OBJECT-TYPE
SYNTAX ArpProxyArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about Proxy ARP configuration."
INDEX { arpProxyArpIfIndex }
::= { arpProxyArpTable 1 }
ArpProxyArpEntry ::= SEQUENCE
{
arpProxyArpIfIndex Integer32,
arpProxyArpStatus EnabledStatus
}
arpProxyArpIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as a VLAN interface.
A routing interface is a VLAN that binds an IP
subnet."
::= { arpProxyArpEntry 1 }
arpProxyArpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable proxy ARP process on an interface."
DEFVAL { enabled }
::= { arpProxyArpEntry 2 }
-- ripMgt
ripTimers OBJECT IDENTIFIER ::= { ripMgt 1 }
ripUpdateTime OBJECT-TYPE
SYNTAX Integer32 (15..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The update time in seconds controls the advertising of regular
update messages. In the real implemention, the actual timer is
this value offset by a small random time (+/- 0 to 5 seconds)
each time it is set."
DEFVAL { 30 }
::= { ripTimers 1 }
ripTimeoutTime OBJECT-TYPE
SYNTAX Integer32 (90..360)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout timer in seconds governs the validity of a route.
It is initialized when a route is established, and any time
an update message is received for the route. If the setting time
elapses from the last time the timeout was initialized, the route
is considered to have expired, and the hop count of the route is
set to infinite. It should be at least three times the value of
the update timer."
DEFVAL { 180 }
::= { ripTimers 2 }
ripGarbageCollectionTime OBJECT-TYPE
SYNTAX Integer32 (60..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When the information about a route becomes invalid, the system
does not immediately purge that route from its table. Instead,
it continues to advertise the route with an infinite metric
At the same time, the garbage-collection timer is set for that
route. When the count reaches zero, the route is purged from the
the table. This timer allows neighbors to become aware of
the invalidity of a route prior to purging."
DEFVAL { 120 }
::= { ripTimers 3 }
ripRoutingProcessStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable RIP routing process on a system."
DEFVAL { disabled }
::= { ripMgt 2 }
ripRouterVersion OBJECT-TYPE
SYNTAX INTEGER
{
byInterface(1),
rip1(2),
rip2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To specify an RIP version used globally by the router."
DEFVAL { rip2 }
::= { ripMgt 3 }
ripInstabilityPreventingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipInstabilityPreventingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of RIP instability preventing status."
::= { ripMgt 4 }
ripInstabilityPreventingEntry OBJECT-TYPE
SYNTAX RipInstabilityPreventingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about RIP instability preventing configuration.
The ifIndex index is a VLAN's ifIndex."
INDEX { ripVlanIndex }
::= { ripInstabilityPreventingTable 1 }
RipInstabilityPreventingEntry ::= SEQUENCE
{
ripVlanIndex Integer32,
ripSplitHorizonStatus INTEGER
}
ripVlanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as a VLAN interface.
A routing interface is a VLAN and an IP subnet bound to it."
::= { ripInstabilityPreventingEntry 1 }
ripSplitHorizonStatus OBJECT-TYPE
SYNTAX INTEGER
{
splitHorizon(1),
poisonReverse(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable RIP poison reverse on an interface."
::= { ripInstabilityPreventingEntry 2 }
ripStatisticsReset OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
noReset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write it to reset(1), the following objects in RFC 1724
should be reset:
1. Global Counters:
'rip2GlobalRouteChanges',
'rip2GlobalQueries'.
2. Interface Status Table, for each 'rip2IfStatAddress':
'rip2IfStatRcvBadPackets',
'rip2IfStatRcvBadRoutes',
'rip2IfStatSendUpdates'
3. Peer Table, for each 'rip2PeerAddress' and 'rip2PeerDomain',
'rip2PeerRcvBadPackets',
'rip2PeerRcvBadRoutes'
When read this value always is noReset(2)."
::= { ripMgt 5 }
ripNetworkAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipNetworkAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The RIF network address table."
::= { ripMgt 6 }
ripNetworkAddrEntry OBJECT-TYPE
SYNTAX RipNetworkAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the ripNetworkAddrTable."
INDEX { ripNetworkAddrAddress }
::= { ripNetworkAddrTable 1 }
RipNetworkAddrEntry ::= SEQUENCE
{
ripNetworkAddrAddress IpAddress,
ripNetworkAddrStatus ValidStatus
}
ripNetworkAddrAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The RIP Network address."
::= { ripNetworkAddrEntry 1 }
ripNetworkAddrStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this variable to create or destroy an RIP network address."
::= { ripNetworkAddrEntry 2 }
-- ospfMgt
ospfSystemGroup OBJECT IDENTIFIER ::= { ospfMgt 1 }
ospfRouterIdType OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set router ID automatically or manually."
DEFVAL { auto }
::= { ospfSystemGroup 1 }
ospfRfc1583CompatibleState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable rfc1583 compatibility."
DEFVAL { disabled }
::= { ospfSystemGroup 2 }
ospfAutoCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the reference bandwith of auto cost, the unit is Mbps."
DEFVAL { 100 }
::= { ospfSystemGroup 3 }
ospfOriginateDefaultRoute OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable ASBR to generate a default external
route into an OSPF domain if the default route already
exists."
DEFVAL { disabled }
::= { ospfSystemGroup 4 }
ospfAdvertiseDefaultRoute OBJECT-TYPE
SYNTAX INTEGER
{
always(1),
notAlways(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If enabled, always advertises the default route regardless
of whether the default route exists."
DEFVAL { notAlways }
::= { ospfSystemGroup 5 }
ospfExternalMetricType OBJECT-TYPE
SYNTAX INTEGER
{
type1 (1),
type2 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "External link type associated with the default route
advertised into the OSPF routing domain."
DEFVAL { type2 }
::= { ospfSystemGroup 6 }
ospfDefaultExternalMetric OBJECT-TYPE
SYNTAX OspfBigMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Metric used for generating the default route."
DEFVAL { 10 }
::= { ospfSystemGroup 7 }
ospfSpfHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the hold time between two consecutive SPF calculations."
DEFVAL { 10 }
::= { ospfSystemGroup 8 }
ospfSpfDelayTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the delay time to calculate SPF Delay time, in seconds, between
when OSPF receives a topology change and when it starts an SPF calculation."
DEFVAL { 5 }
::= { ospfSystemGroup 9 }
ospfAreaNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Records the OSPF area numbers."
DEFVAL { 0 }
::= { ospfSystemGroup 10 }
ospfNssaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNssaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptually table for ospfNssaEntry."
::= {ospfMgt 2 }
ospfNssaEntry OBJECT-TYPE
SYNTAX OspfNssaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptually row for ospfNssaTable."
INDEX { ospfNssaAreaId }
::= { ospfNssaTable 1 }
OspfNssaEntry ::= SEQUENCE
{
ospfNssaAreaId OspfAreaID,
ospfNssaRedistributeStatus EnabledStatus,
ospfNssaOriginateDefaultInfoStatus EnabledStatus,
ospfNssaStatus RowStatus
}
ospfNssaAreaId OBJECT-TYPE
SYNTAX OspfAreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The 32-bit identifier for the NSSA. On creation,
this can be derived from the instance."
::= { ospfNssaEntry 1 }
ospfNssaRedistributeStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabled or disabled to import routes only into the normal areas,
but not into the NSSA area."
DEFVAL { enabled }
::= { ospfNssaEntry 2 }
ospfNssaOriginateDefaultInfoStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Enable or disable to generate a Type 7 default into the NSSA area."
DEFVAL { disabled }
::= { ospfNssaEntry 3 }
ospfNssaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { ospfNssaEntry 4 }
ospfRedistributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfRedistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual table of all of ospfRedistributeEntry."
::= {ospfMgt 3 }
ospfRedistributeEntry OBJECT-TYPE
SYNTAX OspfRedistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row for ospfRedistributeTable."
INDEX { ospfRedistributeProtocol }
::= { ospfRedistributeTable 1 }
OspfRedistributeEntry ::= SEQUENCE
{
ospfRedistributeProtocol INTEGER,
ospfRedistributeMetricType INTEGER,
ospfRedistributeMetric OspfBigMetric,
ospfRedistributeStatus RowStatus
}
ospfRedistributeProtocol OBJECT-TYPE
SYNTAX INTEGER
{
rip(1),
static(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Protocol ID. Static is not supported now."
::= { ospfRedistributeEntry 1 }
ospfRedistributeMetricType OBJECT-TYPE
SYNTAX INTEGER
{
type1(1),
type2(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Metric type."
DEFVAL {type2}
::= { ospfRedistributeEntry 2 }
ospfRedistributeMetric OBJECT-TYPE
SYNTAX OspfBigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Metric value."
DEFVAL {10}
::= { ospfRedistributeEntry 3 }
ospfRedistributeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { ospfRedistributeEntry 4 }
ospfSummaryAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfSummaryAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual table of all of ospfSummaryAddressEntry."
::= {ospfMgt 4}
ospfSummaryAddressEntry OBJECT-TYPE
SYNTAX OspfSummaryAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row for ospfSummaryAddressTable."
INDEX { ospfSummaryAddress,ospfSummaryMask }
::= { ospfSummaryAddressTable 1 }
OspfSummaryAddressEntry ::= SEQUENCE
{
ospfSummaryAddress IpAddress,
ospfSummaryMask IpAddress,
ospfSummaryStatus RowStatus
}
ospfSummaryAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Summary address."
::= { ospfSummaryAddressEntry 1 }
ospfSummaryMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Summary mask."
::= { ospfSummaryAddressEntry 2 }
ospfSummaryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { ospfSummaryAddressEntry 3 }
ospfNetworkAreaAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNetworkAreaAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual table of all of ospfNetworkAreaAddressEntry."
::= {ospfMgt 5 }
ospfNetworkAreaAddressEntry OBJECT-TYPE
SYNTAX OspfNetworkAreaAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row for ospfNetworkAreaAddressTable."
INDEX { ospfNetworkAareaAddress,ospfNetworkAreaMask }
::= { ospfNetworkAreaAddressTable 1 }
OspfNetworkAreaAddressEntry ::= SEQUENCE
{
ospfNetworkAareaAddress IpAddress,
ospfNetworkAreaMask IpAddress,
ospfNetworkAreaAreaId IpAddress,
ospfNetworkAreaStatus RowStatus
}
ospfNetworkAareaAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NetworkArea address."
::= { ospfNetworkAreaAddressEntry 1 }
ospfNetworkAreaMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NetworkArea mask."
::= { ospfNetworkAreaAddressEntry 2 }
ospfNetworkAreaAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"NetworkArea area ID."
::= { ospfNetworkAreaAddressEntry 3 }
ospfNetworkAreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { ospfNetworkAreaAddressEntry 4 }
--
-- dvmrpMgt
--
dvmrpScalar OBJECT IDENTIFIER ::= { dvmrpMgt 1 }
dvmrpVersionString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router's DVMRP version information. Similar to
sysDescr in MIB-II, this is a free-form field which can be
used to display vendor-specific information."
::= { dvmrpScalar 1 }
-- dvmrpScalar 2 was previously used for a global
-- Generation ID. However, the DVMRP spec changed it to
-- a per-interface parameter.
dvmrpNumRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the routing table. This can be
used to monitor the routing table size."
::= { dvmrpScalar 3 }
dvmrpReachableRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the routing table with non-infinite
metrics. This can be used to detect network partitions
by observing the ratio of reachable routes to total routes."
::= { dvmrpScalar 4 }
-- The DVMRP Interface Table
dvmrpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DvmrpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's multicast-capable
interfaces."
::= { dvmrpMgt 2 }
dvmrpInterfaceEntry OBJECT-TYPE
SYNTAX DvmrpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the dvmrpInterfaceTable. This
row augments ipMRouteInterfaceEntry in the IP multicast MIB,
where the threshold object resides."
INDEX { dvmrpInterfaceIndex }
::= { dvmrpInterfaceTable 1 }
DvmrpInterfaceEntry ::= SEQUENCE {
dvmrpInterfaceIndex InterfaceIndex,
dvmrpInterfaceLocalAddress IpAddress,
dvmrpInterfaceMetric Integer32,
dvmrpInterfaceStatus RowStatus,
dvmrpInterfaceRcvBadPkts Counter32,
dvmrpInterfaceRcvBadRoutes Counter32,
dvmrpInterfaceSentRoutes Counter32,
dvmrpInterfaceKey SnmpAdminString,
dvmrpInterfaceKeyVersion Integer32,
dvmrpInterfaceGenerationId Integer32
}
dvmrpInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which DVMRP is
enabled."
::= { dvmrpInterfaceEntry 1 }
dvmrpInterfaceLocalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address this system will use as a source address on
this interface. On unnumbered interfaces, it must be the
same value as dvmrpInterfaceLocalAddress for some interface
on the system."
::= { dvmrpInterfaceEntry 2 }
dvmrpInterfaceMetric OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The distance metric for this interface which is used to
calculate distance vectors."
DEFVAL { 1 }
::= { dvmrpInterfaceEntry 3 }
dvmrpInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { dvmrpInterfaceEntry 4 }
dvmrpInterfaceRcvBadPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DVMRP messages received on the interface by
the DVMRP process which were subsequently discarded as
invalid (e.g. invalid packet format, or a route report from
an unknown neighbor)."
::= { dvmrpInterfaceEntry 5 }
dvmrpInterfaceRcvBadRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes, in valid DVMRP packets, which were
ignored because the entry was invalid."
::= { dvmrpInterfaceEntry 6 }
dvmrpInterfaceSentRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes, in DVMRP Report packets, which have
been sent on this interface. Together with
dvmrpNeighborRcvRoutes as a peer, this object is useful for
detecting routes being lost."
::= { dvmrpInterfaceEntry 7 }
dvmrpInterfaceKey OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The (shared) key for authenticating neighbors on this
interface. This object is intended solely for the purpose
of setting the interface key, and must be accessible only
via requests using both authentication and privacy. The
agent may report an empty string in response to get, get-next,
and get-bulk requests."
::= { dvmrpInterfaceEntry 8 }
dvmrpInterfaceKeyVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest version number of all known interface keys for
this interface used for authenticating neighbors."
::= { dvmrpInterfaceEntry 9 }
dvmrpInterfaceGenerationId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The generation identifier for the interface. This is used
by neighboring routers to detect whether the DVMRP routing
table should be resent."
::= { dvmrpInterfaceEntry 10 }
-- The DVMRP Neighbor Table
dvmrpNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF DvmrpNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's DVMRP
neighbors, as discovered by receiving DVMRP messages."
::= { dvmrpMgt 3 }
dvmrpNeighborEntry OBJECT-TYPE
SYNTAX DvmrpNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the dvmrpNeighborTable."
INDEX { dvmrpNeighborIfIndex, dvmrpNeighborAddress }
::= { dvmrpNeighborTable 1 }
DvmrpNeighborEntry ::= SEQUENCE {
dvmrpNeighborIfIndex InterfaceIndex,
dvmrpNeighborAddress IpAddress,
dvmrpNeighborUpTime TimeTicks,
dvmrpNeighborExpiryTime TimeTicks,
dvmrpNeighborGenerationId Integer32,
dvmrpNeighborMajorVersion Integer32,
dvmrpNeighborMinorVersion Integer32,
dvmrpNeighborCapabilities BITS,
dvmrpNeighborRcvRoutes Counter32,
dvmrpNeighborRcvBadPkts Counter32,
dvmrpNeighborRcvBadRoutes Counter32,
dvmrpNeighborState INTEGER
}
dvmrpNeighborIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the virtual interface used to
reach this DVMRP neighbor."
::= { dvmrpNeighborEntry 1 }
dvmrpNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the DVMRP neighbor for which this entry
contains information."
::= { dvmrpNeighborEntry 2 }
dvmrpNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this DVMRP neighbor (last) became a neighbor
of the local router."
::= { dvmrpNeighborEntry 3 }
dvmrpNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before this DVMRP neighbor will
be aged out."
::= { dvmrpNeighborEntry 4 }
dvmrpNeighborGenerationId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The neighboring router's generation identifier."
::= { dvmrpNeighborEntry 5 }
dvmrpNeighborMajorVersion OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The neighboring router's major DVMRP version number."
::= { dvmrpNeighborEntry 6 }
dvmrpNeighborMinorVersion OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The neighboring router's minor DVMRP version number."
::= { dvmrpNeighborEntry 7 }
dvmrpNeighborCapabilities OBJECT-TYPE
SYNTAX BITS {
leaf(0),
prune(1),
generationID(2),
mtrace(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the neighboring router's
capabilities. The leaf bit indicates that the neighbor has
only one interface with neighbors. The prune bit indicates
that the neighbor supports pruning. The generationID bit
indicates that the neighbor sends its generationID in Probe
messages. The mtrace bit indicates that the neighbor can
handle mtrace requests."
::= { dvmrpNeighborEntry 8 }
dvmrpNeighborRcvRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routes received in valid DVMRP packets
from this neighbor.This can be used to diagnose problems
such as unicast route injection, as well as giving
an indication of the level of DVMRP route exchange
activity."
::= { dvmrpNeighborEntry 9 }
dvmrpNeighborRcvBadPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packet received from this neighbor which were
discarded as invalid."
::= { dvmrpNeighborEntry 10 }
dvmrpNeighborRcvBadRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes, in valid DVMRP packets received from
this neighbor, which were ignored because the entry was
invalid."
::= { dvmrpNeighborEntry 11 }
dvmrpNeighborState OBJECT-TYPE
SYNTAX INTEGER { oneway(1), active(2), ignoring(3), down(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the neighbor adjacency."
::= { dvmrpNeighborEntry 12 }
-- The DVMRP Route Table
dvmrpRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF DvmrpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of routes learned through DVMRP route exchange."
::= { dvmrpMgt 4 }
dvmrpRouteEntry OBJECT-TYPE
SYNTAX DvmrpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information used by DVMRP in place of unicast routing
information."
INDEX { dvmrpRouteSource, dvmrpRouteSourceMask }
::= { dvmrpRouteTable 1 }
DvmrpRouteEntry ::= SEQUENCE {
dvmrpRouteSource IpAddress,
dvmrpRouteSourceMask IpAddress,
dvmrpRouteUpstreamNeighbor IpAddress,
dvmrpRouteIfIndex InterfaceIndexOrZero,
dvmrpRouteMetric Integer32,
dvmrpRouteExpiryTime TimeTicks,
dvmrpRouteUpTime TimeTicks
}
dvmrpRouteSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of dvmrpRouteSourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { dvmrpRouteEntry 1 }
dvmrpRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of dvmrpRouteSource identifies the sources for which
this entry contains multicast routing information."
::= { dvmrpRouteEntry 2 }
dvmrpRouteUpstreamNeighbor OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources are received."
::= { dvmrpRouteEntry 3 }
dvmrpRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the ifIndex for the interface on which IP
datagrams sent by these sources are received. A value of 0
typically means the route is an aggregate for which no next-
hop interface exists."
::= { dvmrpRouteEntry 4 }
dvmrpRouteMetric OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The distance in hops to the source subnet."
::= { dvmrpRouteEntry 5 }
dvmrpRouteExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out."
::= { dvmrpRouteEntry 6 }
dvmrpRouteUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the route represented by this entry was
learned by the router."
::= { dvmrpRouteEntry 7 }
-- The DVMRP Routing Next Hop Table
dvmrpRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF DvmrpRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams."
::= { dvmrpMgt 5 }
dvmrpRouteNextHopEntry OBJECT-TYPE
SYNTAX DvmrpRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources are routed."
INDEX { dvmrpRouteNextHopSource, dvmrpRouteNextHopSourceMask,
dvmrpRouteNextHopIfIndex }
::= { dvmrpRouteNextHopTable 1 }
DvmrpRouteNextHopEntry ::= SEQUENCE {
dvmrpRouteNextHopSource IpAddress,
dvmrpRouteNextHopSourceMask IpAddress,
dvmrpRouteNextHopIfIndex InterfaceIndex,
dvmrpRouteNextHopType INTEGER
}
dvmrpRouteNextHopSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of dvmrpRouteNextHopSourceMask
identifies the sources for which this entry specifies a next
hop on an outgoing interface."
::= { dvmrpRouteNextHopEntry 1 }
dvmrpRouteNextHopSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of dvmrpRouteNextHopSource identifies the sources for
which this entry specifies a next hop on an outgoing
interface."
::= { dvmrpRouteNextHopEntry 2 }
dvmrpRouteNextHopIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for the outgoing
interface for this next hop."
::= { dvmrpRouteNextHopEntry 3 }
dvmrpRouteNextHopType OBJECT-TYPE
SYNTAX INTEGER { leaf(1), branch(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type is leaf if no downstream dependent neighbors exist on
the outgoing virtual interface. Otherwise, type is branch."
::= { dvmrpRouteNextHopEntry 4 }
-- The DVMRP Prune Table
dvmrpPruneTable OBJECT-TYPE
SYNTAX SEQUENCE OF DvmrpPruneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's upstream prune
state."
::= { dvmrpMgt 6 }
dvmrpPruneEntry OBJECT-TYPE
SYNTAX DvmrpPruneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the dvmrpPruneTable."
INDEX { dvmrpPruneGroup, dvmrpPruneSource,
dvmrpPruneSourceMask }
::= { dvmrpPruneTable 1 }
DvmrpPruneEntry ::= SEQUENCE {
dvmrpPruneGroup IpAddress,
dvmrpPruneSource IpAddress,
dvmrpPruneSourceMask IpAddress,
dvmrpPruneExpiryTime TimeTicks
}
dvmrpPruneGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address which has been pruned."
::= { dvmrpPruneEntry 1 }
dvmrpPruneSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the source or source network which has been
pruned."
::= { dvmrpPruneEntry 2 }
dvmrpPruneSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the source or source network which has been
pruned. The mask must either be all 1's, or else
dvmrpPruneSource and dvmrpPruneSourceMask must match
dvmrpRouteSource and dvmrpRouteSourceMask for some entry in
the dvmrpRouteTable."
::= { dvmrpPruneEntry 3 }
dvmrpPruneExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time remaining before this prune should
expire at the upstream neighbor. This value should be the
minimum of the default prune lifetime and the remaining
prune lifetimes of the local router's downstream neighbors,
if any."
::= { dvmrpPruneEntry 4 }
ipCidrRouteExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCidrRouteExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IP Extension Routing table."
REFERENCE
"Rfc2096 Section 9, IP CIDR Route Table."
::= { routeMgt 2 }
ipCidrRouteExtEntry OBJECT-TYPE
SYNTAX IpCidrRouteExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination,
under a particular policy."
INDEX {
ipCidrRouteExtDest,
ipCidrRouteExtMask,
ipCidrRouteExtTos,
ipCidrRouteExtNextHop
}
::= { ipCidrRouteExtTable 1 }
IpCidrRouteExtEntry ::=
SEQUENCE {
ipCidrRouteExtDest
IpAddress,
ipCidrRouteExtMask
IpAddress,
ipCidrRouteExtTos
Integer32,
ipCidrRouteExtNextHop
IpAddress,
ipCidrRouteExtOspfSubType
INTEGER
}
ipCidrRouteExtDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
ipCidrRouteMask object is not equal to x."
::= { ipCidrRouteExtEntry 1 }
ipCidrRouteExtMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the mask to be logically-ANDed with the
destination address before being compared to
the value in the ipCidrRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the ipCidrRouteMask by reference to the IP Address Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
ipCidrRouteDest object is not equal to
ipCidrRoute-Dest."
::= { ipCidrRouteExtEntry 2 }
-- The following convention is included for specification
-- of TOS Field contents. At this time, the Host Requirements
-- and the Router Requirements documents disagree on the width
-- of the TOS field. This mapping describes the Router
-- Requirements mapping, and leaves room to widen the TOS field
-- without impact to fielded systems.
ipCidrRouteExtTos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The policy specifier is the IP TOS Field. The encoding
of IP TOS is as specified by the following convention.
Zero indicates the default path if no more specific
policy applies.
+-----+-----+-----+-----+-----+-----+-----+-----+
| | | |
| PRECEDENCE | TYPE OF SERVICE | 0 |
| | | |
+-----+-----+-----+-----+-----+-----+-----+-----+
IP TOS IP TOS
Field Policy Field Policy
Contents Code Contents Code
0 0 0 0 ==> 0 0 0 0 1 ==> 2
0 0 1 0 ==> 4 0 0 1 1 ==> 6
0 1 0 0 ==> 8 0 1 0 1 ==> 10
0 1 1 0 ==> 12 0 1 1 1 ==> 14
1 0 0 0 ==> 16 1 0 0 1 ==> 18
1 0 1 0 ==> 20 1 0 1 1 ==> 22
1 1 0 0 ==> 24 1 1 0 1 ==> 26
1 1 1 0 ==> 28 1 1 1 1 ==> 30"
::= { ipCidrRouteExtEntry 3 }
ipCidrRouteExtNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next system en route;
Otherwise, 0.0.0.0."
::= { ipCidrRouteExtEntry 4 }
ipCidrRouteExtOspfSubType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
ospfInter(2),
ospfIntra(3),
ospfNssa1(4),
ospfNssa2(5),
ospfType1(6),
ospfType2(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF SubType, when the ipCidrRouteProto in IP-FORWARD MIB is
ospf(13), this object has the value (2)-(7), otherwises, this object
will always show none(1)."
REFERENCE " Rfc2096 Section 9, IP CIDR Route Table."
::= { ipCidrRouteExtEntry 5 }
--
-- sysLogMgt
--
-- Management for system log. This configures the logging
-- of events inside the switch.
sysLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the system log is enabled."
::= { sysLogMgt 1 }
sysLogHistoryFlashLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to flash."
::= { sysLogMgt 2 }
sysLogHistoryRamLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to RAM."
::= { sysLogMgt 3 }
--
--remoteLogMgt
--
remoteLogMgt OBJECT IDENTIFIER ::= { sysLogMgt 6 }
remoteLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the remote log system is enabled."
::= { remoteLogMgt 1 }
remoteLogLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for remote log."
::= { remoteLogMgt 2 }
remoteLogFacilityType OBJECT-TYPE
SYNTAX INTEGER
{
localUse0(16),
localUse1(17),
localUse2(18),
localUse3(19),
localUse4(20),
localUse5(21),
localUse6(22),
localUse7(23)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The facility type for remote log."
::= { remoteLogMgt 3 }
--remoteLogServerTable
remoteLogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A Table for storing the remote log Server list."
::= { remoteLogMgt 4 }
remoteLogServerEntry OBJECT-TYPE
SYNTAX RemoteLogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptually row for remoteLogServerTable."
INDEX { remoteLogServerIp }
::= { remoteLogServerTable 1 }
RemoteLogServerEntry ::= SEQUENCE
{
remoteLogServerIp IpAddress,
remoteLogServerStatus ValidStatus
}
remoteLogServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of the remote log Server."
::= { remoteLogServerEntry 1 }
remoteLogServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { remoteLogServerEntry 2 }
--
--smtpMgt
--
smtpMgt OBJECT IDENTIFIER ::= { sysLogMgt 7 }
smtpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SMTP, set disabled(2) to disable
the SMTP."
::= { smtpMgt 1 }
smtpSeverityLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the SMTP minimum severity level to send the event message."
::= { smtpMgt 2 }
smtpSourceEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMTP source email address,
the sender's mail address that appears
in the 'From' field of the mail."
::= { smtpMgt 3 }
--smtpServerIpTable
smtpServerIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The SMTP server IP table.
The maximum servers to be added is 3."
::= { smtpMgt 4 }
smtpServerIpEntry OBJECT-TYPE
SYNTAX SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpServerIpTable."
INDEX { smtpServerIp }
::= { smtpServerIpTable 1 }
SmtpServerIpEntry ::= SEQUENCE
{
smtpServerIp IpAddress,
smtpServerIpStatus ValidStatus
}
smtpServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SMTP mail server's IP address."
::= { smtpServerIpEntry 1 }
smtpServerIpStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpServerIpEntry 2 }
--smtpDestEMailTable
smtpDestEMailTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5."
::= { smtpMgt 5}
smtpDestEMailEntry OBJECT-TYPE
SYNTAX SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpDestEMailTable."
INDEX { smtpDestEMail }
::= { smtpDestEMailTable 1 }
SmtpDestEMailEntry ::= SEQUENCE
{
smtpDestEMail DisplayString,
smtpDestEMailStatus ValidStatus
}
smtpDestEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SMTP destination e-mail address."
::= { smtpDestEMailEntry 1 }
smtpDestEMailStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpDestEMailEntry 2 }
--
-- lineMgt
--
-- Management for line. This includes management for
-- serial line (RS232 port) and Telnet.
consoleMgt OBJECT IDENTIFIER ::= { lineMgt 1 }
telnetMgt OBJECT IDENTIFIER ::= { lineMgt 2 }
--consoleMgt
consoleDataBits OBJECT-TYPE
SYNTAX INTEGER
{
databits7(1),
databits8(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of data bits."
::= { consoleMgt 1 }
consoleParity OBJECT-TYPE
SYNTAX INTEGER
{
partyNone(1),
partyEven(2),
partyOdd(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the generation of a parity bit."
::= { consoleMgt 2 }
consoleStopBits OBJECT-TYPE
SYNTAX INTEGER
{
stopbits1(1),
stopbits2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The console stop bits, valid values are stopbits1(1) or stopbits2(2)"
::= { consoleMgt 4 }
consoleExecTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In a serial console, use the consoleExecTimeout
variable to set the interval that the EXEC command
interpreter waits until user input is detected;
set the value to 0 to disable it."
::= { consoleMgt 5 }
consolePasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed console logon attempts that may be
made before the system will not accept a further attempt
in the time specified by consoleSilentTime. A value of 0
disables the functionality."
::= { consoleMgt 6 }
consoleSilentTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The length of time that the management console is
inaccessible after the number of failed logon
attempts has reached consolePasswordThreshold. A value
of 0 disables the functionality."
::= { consoleMgt 7 }
consoleAdminBaudRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Baud rate. Valid values are 2400, 4800, 9600,
19200, 38400, 57600, 115200.
Setting this variable to 0 means autobaud.
Please read the actual baud rate in the consoleOperBaudRate variable."
::= { consoleMgt 8 }
consoleOperBaudRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate currently in use."
::= { consoleMgt 9 }
--to set login timeout seconds
consoleLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Console login response timeout setting.
Valid range is 0 to 300. Setting to 0 means disabled."
::= { consoleMgt 10 }
-- telnetMgt
telnetExecTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the interval that the system waits for user input
before terminating the current telnet session."
::= { telnetMgt 1 }
telnetPasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed telnet logon attempts that may be made
before the system will not accept a further attempt to logon
with telnet."
::= { telnetMgt 2 }
--to set login timeout seconds
telnetLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Telnet login response timeout setting.
Valid range is 1 to 300.
This timout setting cannot be disbled."
::= { telnetMgt 3 }
telnetStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable or disable the telnet function.
Any new telnet request will be rejected and all current telnet sessions will be
terminated if this status is set to disabled(2)."
DEFVAL { enabled }
::= { telnetMgt 4 }
telnetPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The telnet session port number."
DEFVAL { 23 }
::= { telnetMgt 5 }
--
-- sysTimeMgt
--
sntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 1 }
sntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SNTP, set disabled(2) to disable
the SNTP."
::= { sntpMgt 1 }
sntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1),
broadcast(2),
anycast(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Service mode."
::= { sntpMgt 2 }
sntpPollInterval OBJECT-TYPE
SYNTAX Integer32(16..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Polling interval."
::= { sntpMgt 3 }
sntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for SNTP servers"
::= { sntpMgt 4 }
sntpServerEntry OBJECT-TYPE
SYNTAX SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for SNTP servers."
INDEX { sntpServerIndex }
::= { sntpServerTable 1 }
SntpServerEntry ::= SEQUENCE
{
sntpServerIndex Integer32,
sntpServerIpAddress IpAddress
}
sntpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a server. This table has fixed size."
::= { sntpServerEntry 1 }
sntpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index are 0."
::= { sntpServerEntry 2 }
sysCurrentTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form, based on Unix:
'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters
of the English name of the month. '_d' is the day of month.
A single-digit day is preceded by a space. 'hh:mm:ss' is
a 24-hour representations of hours, minutes, and seconds.
A single-digit hour is preceded by a zero. 'yyyy' is a
four-digit year. An example is: 'Jan 1 02:03:04 2002'."
::= { sysTimeMgt 2 }
sysTimeZone OBJECT-TYPE
SYNTAX DisplayString(SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form: '[s]hh:mm'.
'[s]' is a plus-or-minus sign. For UTC, this is omitted.
For a positive offset, this is '+'. For a negative offset,
this is '-'. 'hh:mm' in the hour and minute offset from UTC.
A single-digit hour is preceded by a zero."
::= { sysTimeMgt 3 }
sysTimeZoneName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the time zone."
::= { sysTimeMgt 4 }
--
-- fileMgt
--
-- Management for File System Manipulate, including files copy, display and delete.
fileCopyMgt OBJECT IDENTIFIER ::= { fileMgt 1 }
--
-- This performs the copy operation.
--
fileCopySrcOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Copy Operation that we want to perform on the
fileCopyDestOperType, this operation is similar to the CLI
command 'copy fileCopySrcOperType fileCopyDestOperType'.
file(1) means we want to perform the 'copy file fileCopyDestType'
operation, runningCfg(2) means we want to perform the
'copy running-config fileCopyDestOperType' operation,
startUpCfg(3) means we want to perform the
'copy startup-config fileCopyDestOperType' operation, tftp(4) means
we want to perform the 'copy tftp fileCopyDestOperType' operation,
unit(5) is only available in stacking systems, in which we
can copy files from one unit to another unit and it means
we want to perform the 'copy unit fileCopyDestOperType' operation.
The possible permutations are as follows: (1)copy file file
(2)copy file runningCfg (3) copy file startUpCfg
(4)copy file tftp (5) copy file unit(for stacking systems only)
(6)copy runningCfg file (7)copy runningCfg startUpCfg
(8)copy runningCfg tftp (9)copy startupCfg file
(10)copy startupCfg runningCfg (11)copy startupCfg tftp
(12)copy tftp file (13)copy tftp runningCfg
(14)copy tftp startUpCfg (15)copy unit file."
::= { fileCopyMgt 1}
fileCopySrcFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source file name for fileCopyMgt when a copy
operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopySrcOperType is runningCfg(2) or startUpCfg(3),
this variable can be ignored."
::= { fileCopyMgt 2 }
fileCopyDestOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Copy Operation that we want to perform on
fileCopySrcOperType, this operation is similar to the CLI
command 'copy fileCopySrcOperType fileCopyDestOperType'.
file(1) means we want to perform the 'copy fileCopySrcType file '
operation, runningCfg(2) means we want to perform the
'copy fileCopySrcOperType running-config ' operation,
startUpCfg(3) means we want to perform the
'copy fileCopySrcOperType startup-config ' operation, tftp(4) means
we want to perform the 'copy fileCopySrcOperType tftp' operation,
unit(5) is only available in stacking systems in which we
can copy files from one unit to another unit. It means
we want to perform the 'copy fileCopySrcOperType unit' operation.
The possible permutations are as follows: (1)copy file file
(2)copy file runningCfg (3) copy file startUpCfg
(4)copy file tftp (5) copy file unit(for stacking system only)
(6)copy runningCfg file (7)copy runningCfg startUpCfg
(8)copy runningCfg tftp (9)copy startupCfg file
(10)copy startupCfg runningCfg (11)copy startupCfg tftp
(12)copy tftp file (13)copy tftp runningCfg
(14)copy tftp startUpCfg (15)copy unit file."
::= { fileCopyMgt 3 }
fileCopyDestFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination file name for fileCopyMgt when a
copy operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopyDestOperType is runningCfg(2) or startupCfg(3),
this variable can be ignored."
::= { fileCopyMgt 4 }
fileCopyFileType OBJECT-TYPE
SYNTAX INTEGER {
opcode(1),
config(2),
bootRom(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of file to copy in fileCopyMgt. If the fileCopySrcOperType or
fileCopyDestOperType is either runningCfg(2) or startupCfg(3), this
variable can be ignored. If the fileCopySrcOperType or fileCopyDestOperType
is unit(5), this variable cannot be set to bootRom(3)."
::= { fileCopyMgt 5 }
fileCopyTftpServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the TFTP server for transfer
when a download is next requested via this MIB.
This value is set to '0.0.0.0' when no IP address has been
specified. If neither fileCopySrcOperType nor fileCopyDestOperType
is tftp(4), this variable can be ignored."
::= { fileCopyMgt 6 }
fileCopyUnitId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the switch unit for stackable devices.
When performing the 'copy unit file' or 'copy file unit' action,
if neither fileCopySrcOperType nor fileCopyDestOperType
is unit(5), this variable can be ignored."
::= { fileCopyMgt 7 }
fileCopyAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copy(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to copy(2) to begin the copy Operation."
::= { fileCopyMgt 8 }
fileCopyStatus OBJECT-TYPE
SYNTAX FileCopyStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last copy procedure, if any. This
object will have a value of fileCopyUnknown(18) if no
copy operation has been performed."
::= { fileCopyMgt 9 }
fileInfoMgt OBJECT IDENTIFIER ::= { fileMgt 2 }
--
-- This mangement performs the display and delete operation.
--
fileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contain the information of the file system;
we can also perform the delete, set startup file operation."
::= { fileInfoMgt 1 }
fileInfoEntry OBJECT-TYPE
SYNTAX FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptually row for fileInfoTable."
INDEX { fileInfoUnitID, IMPLIED fileInfoFileName}
::= { fileInfoTable 1 }
FileInfoEntry ::= SEQUENCE
{
fileInfoUnitID Integer32,
fileInfoFileName DisplayString,
fileInfoFileType INTEGER,
fileInfoIsStartUp TruthValue,
fileInfoFileSize Integer32,
fileInfoCreationTime DisplayString,
fileInfoDelete INTEGER
}
fileInfoUnitID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileInfoEntry 1 }
fileInfoFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The file Name of the file System in the device."
::= { fileInfoEntry 2 }
fileInfoFileType OBJECT-TYPE
SYNTAX INTEGER
{
diag(1),
runtime(2),
syslog(3),
cmdlog(4),
config(5),
postlog(6),
private(7),
certificate(8),
webarchive(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file type of the file System in the device."
::= { fileInfoEntry 3 }
fileInfoIsStartUp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation."
::= { fileInfoEntry 4 }
fileInfoFileSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sizes( in bytes) of the file."
::= { fileInfoEntry 5 }
fileInfoCreationTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-digit day is preceded by
a space. 'hh:mm:ss' is a 24-hour representations of hours,
minutes, and seconds. A single-digit hour is preceded by a
zero. 'yyyy' is the four-digit year. An example is:
'Jan 1 02:03:04 2002'."
::= { fileInfoEntry 6 }
fileInfoDelete OBJECT-TYPE
SYNTAX INTEGER
{
noDelete(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write this object to delete(2) to delete a file, when
read, this always return noDelete(1)."
::= { fileInfoEntry 7 }
--fileAutoDownloadResultTable
fileAutoDownloadResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains file auto download result information."
::= { fileMgt 3 }
fileAutoDownloadResultEntry OBJECT-TYPE
SYNTAX FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for fileAutoDownloadResultTable."
INDEX {fileAutoDownloadResultUnitID}
::= { fileAutoDownloadResultTable 1 }
FileAutoDownloadResultEntry ::= SEQUENCE
{
fileAutoDownloadResultUnitID Integer32,
fileAutoDownloadResultAction INTEGER,
fileAutoDownloadResultStatus FileCopyStatus
}
fileAutoDownloadResultUnitID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileAutoDownloadResultEntry 1 }
fileAutoDownloadResultAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copying(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
You can check the download result through the fileAutoDownloadResultStatus object
after the download action has finished.
Please note that this object is read-only, since the auto download action is triggered
automatically by the system when an image file or a config file is set as startup setting
through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects,
but not set by the user manually through this fileAutoDownloadResultAction object."
::= { fileAutoDownloadResultEntry 2 }
fileAutoDownloadResultStatus OBJECT-TYPE
SYNTAX FileCopyStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before."
::= { fileAutoDownloadResultEntry 3 }
--
--dnsMgt
--
--dnsHostTable
dnsDomainLookup OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable the IP Domain Naming System (DNS)-based host name-to-address translation."
::= { dnsMgt 1 }
dnsDomainName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To define a default domain name to complete
unqualified host names (names without a dotted-decimal domain name)."
::= { dnsMgt 2 }
dnsHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to define static host name-to-address mapping."
::= { dnsMgt 3 }
dnsHostEntry OBJECT-TYPE
SYNTAX DnsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsHostTable."
INDEX { dnsHostName, dnsHostIndex }
::= { dnsHostTable 1 }
DnsHostEntry ::= SEQUENCE
{
dnsHostName DisplayString,
dnsHostIndex Integer32,
dnsHostIp IpAddress
}
dnsHostName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The DNS Host name."
::= { dnsHostEntry 1 }
dnsHostIndex OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The secondary index of this dnsHostTable, representing the
sequence of the dnsHostIp."
::= { dnsHostEntry 2 }
dnsHostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The DNS Host IP."
::= { dnsHostEntry 3 }
--dnsAliasTable
dnsAliasTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table displays the alias of the host name."
::= { dnsMgt 4 }
dnsAliasEntry OBJECT-TYPE
SYNTAX DnsAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsAliasTable."
INDEX { dnsAliasName, dnaAliasAlias }
::= { dnsAliasTable 1 }
DnsAliasEntry ::= SEQUENCE
{
dnsAliasName DisplayString,
dnaAliasAlias DisplayString
}
dnsAliasName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Host name."
::= { dnsAliasEntry 1 }
dnaAliasAlias OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alias."
::= { dnsAliasEntry 2 }
--dnsDomainListEntry
dnsDomainListTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsDomainListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table defines a list of default domain names to complete unqualified host names."
::= { dnsMgt 5 }
dnsDomainListEntry OBJECT-TYPE
SYNTAX DnsDomainListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsDomainListTable."
INDEX { dnsDomainListName }
::= { dnsDomainListTable 1 }
DnsDomainListEntry ::= SEQUENCE
{
dnsDomainListName DisplayString,
dnsDomainListStatus ValidStatus
}
dnsDomainListName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Domain name."
::= { dnsDomainListEntry 1 }
dnsDomainListStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { dnsDomainListEntry 2 }
--dnsNameServerEntry
dnsNameServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "To specify the address of one or more
name servers to use for name and address resolution.
This table has fixed size, will get 0.0.0.0 dnsNameServerIp
if this entry is not existed."
::= { dnsMgt 6 }
dnsNameServerEntry OBJECT-TYPE
SYNTAX DnsNameServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for dnsNameServerTable."
INDEX { dnsNameServerIndex }
::= { dnsNameServerTable 1 }
DnsNameServerEntry ::= SEQUENCE
{
dnsNameServerIndex Integer32,
dnsNameServerIp IpAddress
}
dnsNameServerIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this dnsNameServerTable,
representing the sequence of the dnsNameServerIp."
::= { dnsNameServerEntry 1 }
dnsNameServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of name server."
::= { dnsNameServerEntry 2 }
--dnsCacheEntry
dnsCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "To display the RRs in DNS cache."
::= { dnsMgt 7 }
dnsCacheEntry OBJECT-TYPE
SYNTAX DnsCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsCacheTable."
INDEX { dnsCacheIndex }
::= { dnsCacheTable 1 }
DnsCacheEntry ::= SEQUENCE
{
dnsCacheIndex Integer32,
dnsCacheFlag Integer32,
dnsCacheType INTEGER,
dnsCacheIp IpAddress,
dnsCacheTtl Integer32,
dnsCacheDomain DisplayString
}
dnsCacheIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry sequence number."
::= { dnsCacheEntry 1 }
dnsCacheFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Always get 4, means this record is unreliable."
::= { dnsCacheEntry 2 }
dnsCacheType OBJECT-TYPE
SYNTAX INTEGER
{
address(1),
cname(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cache Type: address(1); cname(2)."
::= { dnsCacheEntry 3 }
dnsCacheIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache IP."
::= { dnsCacheEntry 4 }
dnsCacheTtl OBJECT-TYPE
SYNTAX Integer32(0..876000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache TTL."
::= { dnsCacheEntry 5 }
dnsCacheDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache domain."
::= { dnsCacheEntry 6 }
--
-- hsrpMgt
--
-- Subgroups
cHsrpGlobalConfig OBJECT IDENTIFIER ::= { hsrpMgt 1 }
cHsrpGroup OBJECT IDENTIFIER ::= { hsrpMgt 2 }
-- Global Config Objects
cHsrpConfigTimeout OBJECT-TYPE
SYNTAX Unsigned32(1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time in minutes a row in cHsrpGrpTable can
remain in a state other than active before being timed out."
DEFVAL { 5 }
::= { cHsrpGlobalConfig 1 }
-- HSRP Tables
cHsrpGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CHsrpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information on each HSRP group
for each interface."
::= { cHsrpGroup 1 }
cHsrpGrpEntry OBJECT-TYPE
SYNTAX CHsrpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an HSRP group. Management applications
use cHsrpGrpRowStatus to control entry modification, creation
and deletion.
Setting cHsrpGrpRowStatus to 'active' causes the router to
communicate using HSRP.
The value of cHsrpGrpRowStatus may be set to 'destroy' at any
time.
Entries may not be created via SNMP without explicitly setting
cHsrpGrpRowStatus to either 'createAndGo' or 'createAndWait'.
Entries can be created and modified via the management
protocol or by the device's local management interface.
A management application wishing to create an entry should
choose the ifIndex of the interface which is to be added
as part of an HSRP group. Also, a cHsrpGrpNumber should
be chosen. A group number is unique only amongst the groups
on a particular interface. The value of the group number
appears in packets which are transmitted and received on a
LAN segment to which the router is connected. The application
must select the group number as explained in the description
for cHsrpGrpNumber.
If the row is not active, and a local management interface
command modifies that row, the row may transition to active
state.
A row which is not in active state will timeout after a
configurable period (five minutes by default). This timeout
period can be changed by setting cHsrpConfigTimeout."
INDEX { ifIndex, cHsrpGrpNumber }
::= { cHsrpGrpTable 1 }
CHsrpGrpEntry ::=
SEQUENCE {
-- index
cHsrpGrpNumber Unsigned32,
-- configuration items
cHsrpGrpAuth DisplayString,
cHsrpGrpPriority Unsigned32,
cHsrpGrpPreempt TruthValue,
cHsrpGrpPreemptDelay Unsigned32,
cHsrpGrpUseConfiguredTimers TruthValue,
-- timers
cHsrpGrpConfiguredHelloTime Unsigned32,
cHsrpGrpConfiguredHoldTime Unsigned32,
cHsrpGrpLearnedHelloTime Unsigned32,
cHsrpGrpLearnedHoldTime Unsigned32,
-- status items
cHsrpGrpVirtualIpAddr IpAddress,
cHsrpGrpUseConfigVirtualIpAddr TruthValue,
cHsrpGrpActiveRouter IpAddress,
cHsrpGrpStandbyRouter IpAddress,
cHsrpGrpStandbyState HsrpState,
cHsrpGrpVirtualMacAddr MacAddress,
cHsrpGrpEntryRowStatus RowStatus
}
cHsrpGrpNumber OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object along with the ifIndex of a particular interface
uniquely identifies an HSRP group.
Group numbers 0,1 and 2 are the only valid group numbers
for TokenRing interfaces. For other media types, numbers
range from 0 to 255. Each interface has its own set of group
numbers. There's no relationship between the groups configured
on different interfaces. Using a group number on one interface
doesn't preclude using the same group number on a different
interface. For example, there can be a group 1 on an Ethernet
and a group 1 on Token Ring. More details can be found from
RFC 2281."
::= { cHsrpGrpEntry 1 }
cHsrpGrpAuth OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an unencrypted authentication string which is
carried in all HSRP messages. An authentication string
mismatch prevents a router interface from learning the
designated IP address or HSRP timer values from
other HSRP-enabled routers with the same group number.
The function of this object is not to supply any sort of
security-like authentication but rather to confirm that what's
happening is what's intended. In other words, this is meant for
sanity checking only."
DEFVAL { "cisco" }
::= { cHsrpGrpEntry 2 }
cHsrpGrpPriority OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The cHsrpGrpPriority helps to select the active
and the standby routers. The router with the highest priority
is selected as the active router. In the priority range of
0 to 255, 0 is the lowest priority and 255 is the highest
priority.
If two (or more) routers in a group have the same priority,
the one with the highest IP address of the interface is the
active router. When the active router fails to send a Hello
message within a configurable period of time, the standby
router with the highest priority becomes the active router.
A router with highest priority will only attempt to overthrow
a lower priority active router if it is configured to preempt.
But, if there is more than one router which is not active, the
highest priority non-active router becomes the standby router."
DEFVAL { 100 }
::= { cHsrpGrpEntry 3 }
cHsrpGrpPreempt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object, if true, indicates that the current router
should attempt to overthrow a lower priority active
router and attempt to become the active router. If this
object is false, the router will become the active router only
if there is no such router (or if an active router fails)."
DEFVAL { false }
::= { cHsrpGrpEntry 4 }
cHsrpGrpPreemptDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This delay is the time difference between a router power up
and the time it can actually start preempting the currently
active router.
When a router first comes up, it doesn't have a complete
routing table. If it's configured to preempt, then it will
become the Active router, but it will not be able to provide
adequate routing services. The solution to this is to allow
for a configurable delay before the router actually preempts
the currently active router."
DEFVAL { 0 }
::= { cHsrpGrpEntry 5 }
cHsrpGrpUseConfiguredTimers OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"HSRP routers learn a group's Hellotime or Holdtime from hello
messages.
The Hellotime is used to determine the frequency of
generating hello messages when this router becomes the active
or standby router. The Holdtime is the interval between the
receipt of a Hello message and the presumption that the
sending router has failed.
If this object is true, the cHsrpGrpConfiguredHelloTime and
cHsrpGrpConfiguredHoldTime will be used. If it is false,
the Hellotime and Holdtime values are learned."
::= { cHsrpGrpEntry 6 }
cHsrpGrpConfiguredHelloTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHelloTime is used when this router is an
active router. Otherwise, the Hellotime learned from the
current active router is used. All routers on a particular
LAN segment must use the same Hellotime."
DEFVAL { 3000 }
::= { cHsrpGrpEntry 7 }
cHsrpGrpConfiguredHoldTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHoldTime is used when this router is an
active router. Otherwise, the Holdtime learned from the
current active router is used. All routers on a particular
LAN segment should use the same Holdtime. Also, the Holdtime
should be at least three times the value of the Hellotime and
must be greater than the Hellotime."
DEFVAL { 10000 }
::= { cHsrpGrpEntry 8 }
cHsrpGrpLearnedHelloTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Hellotime is not configured on a router, it can be
learned from the Hello messages from active router, provided
the Hello message is authenticated. If the Hellotime is not
learned from a Hello message from the active router and it
is not manually configured, a default value of 3 seconds is
recommended."
DEFVAL { 3000 }
::= { cHsrpGrpEntry 9 }
cHsrpGrpLearnedHoldTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Holdtime is not configured on a router, it can be
learned from the Hello message from the active router.
Holdtime should be learned only if the Hello message is
authenticated. If the Holdtime is not learned and it is not
manually configured, a default value of 10 seconds is
recommended."
DEFVAL { 10000 }
::= { cHsrpGrpEntry 10 }
cHsrpGrpVirtualIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the primary virtual IP address used by this group.
If this address is configured (i.e a non zero IP address),
this value is used. Otherwise, the agent will attempt to
discover the virtual address through a discovery process
(which scans the hello messages)."
DEFVAL { '00000000'H }
::= { cHsrpGrpEntry 11 }
cHsrpGrpUseConfigVirtualIpAddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this object is true, cHsrpGrpVirtualIpAddr was a
configured one. Otherwise, it indicates that
cHsrpGrpVirtualIpAddr was a learned one."
::= { cHsrpGrpEntry 12 }
cHsrpGrpActiveRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the currently active router for this group."
::= { cHsrpGrpEntry 13 }
cHsrpGrpStandbyRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the currently standby router for this group."
::= { cHsrpGrpEntry 14 }
cHsrpGrpStandbyState OBJECT-TYPE
SYNTAX HsrpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current HSRP state of this group on this interface."
::= { cHsrpGrpEntry 15 }
cHsrpGrpVirtualMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac Addresses used are as specified in RFC 2281. For ethernet
and fddi interfaces, a MAC address will be in the range
00:00:0c:07:ac:00 through 00:00:0c:07:ac:ff. The last octet is
the hexadecimal equivalent of cHsrpGrpNumber (0-255).
Some Ethernet and FDDI interfaces allow a unicast MAC address
for each HSRP group. Certain Ethernet chipsets(LANCE Ethernet,
VGANYLAN and QUICC Ethernet) only support a single Unicast
Mac Address. In this case, only one HSRP group is allowed.
For TokenRing interfaces, the following three MAC addresses
are permitted (functional addresses):
C0:00:00:01:00:00
C0:00:00:02:00:00
C0:00:00:04:00:00."
::= { cHsrpGrpEntry 16 }
cHsrpGrpEntryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows modification, creation, and deletion
of entries. For detailed rules see the DESCRIPTION for
cHsrpGrpEntry."
::= {cHsrpGrpEntry 17 }
-- Extention group info
cHsrpExtGroup OBJECT IDENTIFIER ::= { hsrpMgt 3 }
cHsrpExtIfTrackedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CHsrpExtIfTrackedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about tracked interfaces per
HSRP group."
::= { cHsrpExtGroup 1 }
cHsrpExtIfTrackedEntry OBJECT-TYPE
SYNTAX CHsrpExtIfTrackedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The cHsrpExtIfTrackedEntry allows an HSRP group
interface to track one or more interfaces. Weight(priority)
is given to each and every interface tracked. When a tracked
interface is unavailable, the HSRP priority of the router is
decreased. i.e cHsrpGrpPriority value assigned to an HSRP
group will reduce by the value assigned to
cHsrpExtIfTrackedPriority. This reduces the likelihood
of a router with a failed key interface becoming the
active router.
Setting cHsrpExtIfTrackedRowStatus to active starts
the tracking of cHsrpExtIfTracked by the HSRP group.
The value of cHsrpExtIfTrackedRowStatus may be set
to destroy at any time.
Entries may not be created via SNMP without explicitly setting
cHsrpExtIfTrackedRowStatus to either 'createAndGo'
or 'createAndWait'.
Entries can be created and modified via the management
protocol or by the device's local management interface.
If the row is not active, and a local management interface
command modifies that row, the row may transition to active
state.
A row entry in the cHsrpExtIfTrackedTable can not be created
unless the corresponding row in the cHsrpGrpTable has been
created. If that corresponding row in cHsrpGrpTable is
deleted, the interfaces it tracks also get deleted.
A row which is not in active state will timeout after a
configurable period (five minutes by default). This timeout
period can be changed by setting cHsrpConfigTimeout."
INDEX { ifIndex, cHsrpGrpNumber, cHsrpExtIfTracked }
::= { cHsrpExtIfTrackedTable 1 }
CHsrpExtIfTrackedEntry ::=
SEQUENCE {
-- interface which is getting tracked
cHsrpExtIfTracked InterfaceIndex,
-- Priority
cHsrpExtIfTrackedPriority Unsigned32,
cHsrpExtIfTrackedRowStatus RowStatus
}
cHsrpExtIfTracked OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index into the cHsrpExtIfTrackedTable for the
corresponding { ifIndex, cHsrpGrpNumber } pair i.e for an
HSRP group. This is the ifIndex of the tracked interface."
::= { cHsrpExtIfTrackedEntry 1 }
cHsrpExtIfTrackedPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Priority of the tracked interface for the corresponding
{ ifIndex, cHsrpGrpNumber } pair. In the range of 0 to 255, 0
is the lowest priority and 255 is the highest. When a tracked
interface is unavailable, the cHsrpGrpPriority of the router
is decreased by the value of this object instance (If the
cHsrpGrpPriority is less than the
cHsrpExtIfTrackedPriority, then the HSRP priority
becomes 0). This allows a standby router to be configured
with a priority such that if the currently active router's
priority is lowered because the tracked interface goes down,
the standby router can takeover."
DEFVAL { 0 }
::= { cHsrpExtIfTrackedEntry 2 }
cHsrpExtIfTrackedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows modification, creation, and deletion
of entries. For detailed rules see the DESCRIPTION for
cHsrpExtIfTrackedEntry."
::= { cHsrpExtIfTrackedEntry 3 }
cHsrpExtSecAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CHsrpExtSecAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about secondary HSRP IP
Addresses per interface and group."
::= { cHsrpExtGroup 2 }
cHsrpExtSecAddrEntry OBJECT-TYPE
SYNTAX CHsrpExtSecAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CHsrpExtSecAddrEntry allows creation of secondary
IP Addresses for each cHsrpGrpEntry row.
Secondary addresses can be added by setting
cHsrpExtSecAddrRowStatus to be active. The value of
cHsrpExtSecAddrRowStatus may be set to destroy at any
time.
Entries may not be created via SNMP without explicitly setting
cHsrpExtSecAddrRowStatus to either 'createAndGo'
or 'createAndWait'.
Entries can be created and modified via the management
protocol or by the device's local management interface.
If the row is not active, and a local management interface
command modifies that row, the row may transition to active
state.
A row which is not in active state will timeout after a
configurable period (five minutes by default). This timeout
period can be changed by setting cHsrpConfigTimeout.
Before creation of a cHsrpExtSecAddrEntry row,
either cHsrpGrpConfiguredVirtualIpAddr or
cHsrpGrpLearnedVirtualIpAddr must have a valid IP Address.
This is because a secondary IP address cannot be created
unless the primary IP address has already been set.
To create a new cHsrpExtSecAddrEntry row, a management
station should choose the ifIndex of the interface which is to
be added as part of an HSRP group. Also, an HSRP group number
and a cHsrpExtSecAddrAddress should be chosen.
Deleting a {ifIndex, cHsrpGrpNumber} row in the
cHsrpGrpTable will delete all corresponding
rows in the cHsrpExtSecAddrTable.
Deleting a primary address value in the cHsrpGrpEntry row
will delete all secondary addresses for the same
{ifIndex, cHsrpGrpNumber} pair."
INDEX { ifIndex, cHsrpGrpNumber, cHsrpExtSecAddrAddress }
::= { cHsrpExtSecAddrTable 1 }
CHsrpExtSecAddrEntry ::=
SEQUENCE {
cHsrpExtSecAddrAddress IpAddress,
cHsrpExtSecAddrRowStatus RowStatus
}
cHsrpExtSecAddrAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A secondary IpAddress for the {ifIndex, cHsrpGrpNumber} pair.
As explained in the DESCRIPTION for cHsrpExtSecAddrEntry, a
primary address must exist before a secondary address for
the same {ifIndex, cHsrpGrpNumber} pair can be created."
::= { cHsrpExtSecAddrEntry 1 }
cHsrpExtSecAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows modification, creation, and deletion
of entries. For detailed rules see the DESCRIPTION for
cHsrpExtSecAddrEntry."
::= { cHsrpExtSecAddrEntry 2 }
--
-- trap definitions
--
lion24tpTraps OBJECT IDENTIFIER ::= { lion24tpNotifications 1 }
lion24tpTrapsPrefix OBJECT IDENTIFIER ::= { lion24tpTraps 0 }
swPowerStatusChangeTrap NOTIFICATION-TYPE
OBJECTS { swIndivPowerUnitIndex, swIndivPowerIndex, swIndivPowerStatus }
STATUS current
DESCRIPTION "This trap is sent when the power state changes."
::= { lion24tpTrapsPrefix 1 }
swFanFailureTrap NOTIFICATION-TYPE
OBJECTS { switchUnitIndex, switchFanIndex }
STATUS current
DESCRIPTION "This trap is sent when the fan is failure."
::= { lion24tpTrapsPrefix 17 }
swFanRecoverTrap NOTIFICATION-TYPE
OBJECTS { switchUnitIndex, switchFanIndex }
STATUS current
DESCRIPTION "This trap is sent when fan failure has recovered."
::= { lion24tpTrapsPrefix 18 }
swIpFilterRejectTrap NOTIFICATION-TYPE
OBJECTS { trapIpFilterRejectMode, trapIpFilterRejectIp }
STATUS current
DESCRIPTION "This trap is sent when an incorrect IP address is rejected by
the ipfilter."
::= { lion24tpTrapsPrefix 40 }
swSmtpConnFailureTrap NOTIFICATION-TYPE
OBJECTS { smtpServerIp }
STATUS current
DESCRIPTION "This trap is triggered if the SMTP system
cannot open a connection to the mail server successfully."
::= { lion24tpTrapsPrefix 41 }
swMainBoardVerMismatchNotificaiton NOTIFICATION-TYPE
OBJECTS { swOpCodeVer, swOpCodeVer}
STATUS current
DESCRIPTION
"This trap is sent when the slave version is mismatch with the
master version. This trap will binds two object, the first object
indicate the master version, whereas the second represent the
slave version. "
::= { lion24tpTrapsPrefix 56 }
swModuleVerMismatchNotificaiton NOTIFICATION-TYPE
OBJECTS { swExpectedModuleOpCodeVer, swModuleOpCodeVer }
STATUS current
DESCRIPTION
"This trap is sent when the module version is mismatch with the
main board version. "
::= { lion24tpTrapsPrefix 57 }
swThermalRisingNotification NOTIFICATION-TYPE
OBJECTS { switchThermalTempValue, switchThermalActionRisingThreshold }
STATUS current
DESCRIPTION
"This trap is sent when the temperature is over the
switchThermalActionRisingThreshold."
::= { lion24tpTrapsPrefix 58 }
swThermalFallingNotification NOTIFICATION-TYPE
OBJECTS { switchThermalTempValue, switchThermalActionFallingThreshold }
STATUS current
DESCRIPTION
"This trap is sent when the temperature is below the
switchThermalActionFallingThreshold."
::= { lion24tpTrapsPrefix 59 }
swModuleInsertionNotificaiton NOTIFICATION-TYPE
OBJECTS { swModuleOpCodeVer}
STATUS current
DESCRIPTION
"This trap is sent when the module is inserted."
::= { lion24tpTrapsPrefix 60 }
swModuleRemovalNotificaiton NOTIFICATION-TYPE
OBJECTS { swModuleOpCodeVer }
STATUS current
DESCRIPTION
"This trap is sent when the module is removed."
::= { lion24tpTrapsPrefix 61 }
END
View Git Blame Copy Permalink