WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/hirschmann/HM2-TIMESYNC-MIB

1986 lines
60 KiB
Plaintext
Raw Permalink Blame History

HM2-TIMESYNC-MIB DEFINITIONS ::= BEGIN
--
-- *************************************************************
-- Hirschmann Time Sync MIB
-- *************************************************************
--
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
OBJECT-IDENTITY,
Integer32 FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION,
DisplayString,
TruthValue, RowStatus FROM SNMPv2-TC
InetAddressType,
InetAddress,
InetPortNumber FROM INET-ADDRESS-MIB -- RFC4001
HmEnabledStatus,
hm2ConfigurationMibs,
HmTimeSeconds1970 FROM HM2-TC-MIB
InterfaceIndexOrZero,
ifIndex FROM IF-MIB;
hm2TimeSyncMib MODULE-IDENTITY
LAST-UPDATED "201809070000Z" -- Sep 07, 2018
ORGANIZATION "Hirschmann Automation and Control GmbH"
CONTACT-INFO
"Postal: Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Phone: +49 7127 140
E-mail: hac.support@belden.com"
DESCRIPTION
"Hirschmann Time Sync MIB.
Copyright (C) 2011. All Rights Reserved."
REVISION "201809070000Z" -- Sep 07, 2018
DESCRIPTION
"Initial version."
::= { hm2ConfigurationMibs 50 }
--
-- *************************************************************
-- Textual Conventions
-- *************************************************************
--
HmSntpClientServerStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of the last received response from a
configured server.
other
- None of the following enumeration values.
success
- The SNTP operation was successful and the system time
was updated.
requestTimedOut
- An SNTP poll request timed out without receiving a
response from the SNTP server.
badDateEncoded
- The time provided by the SNTP server was not valid.
versionNotSupported
- The SNTP version supported by the server is not compatible
with the version supported by the client. This is indicated
by the server returning a version later than the version
configured for that server or a version of '0'.
serverUnsychronized
- The SNTP server is not synchronized with its peers. This
is indicated via the 'leap indicator' field on the SNTP
message.
serverKissOfDeath
- The SNTP server indicated that no further polls are to be
sent to this server. This is indicated by a stratum field
field equal to 0 in a message received from a server."
REFERENCE
"RFC 4330 - Simple Network Time Protocol (SNTP) Version 4
for IPv4, IPv6 and OSI; Section 4."
SYNTAX INTEGER {
other(1),
success(2),
requestTimedOut(3),
badDateEncoded(4),
versionNotSupported(5),
serverUnsychronized(6),
serverKissOfDeath(7)
}
Hm2Ptp2LogSyncIntervalTc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Logarithm to the base of 2 of the mean synchronization interval."
SYNTAX INTEGER {
msec-125 (-3),
msec-250 (-2),
msec-500 (-1),
sec-1 (0),
sec-2 (1)
}
Hm2Ptp2LogPdelayReqIntervalTc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay)."
SYNTAX INTEGER {
sec-1 (0),
sec-2 (1),
sec-4 (2),
sec-8 (3),
sec-16 (4),
sec-32 (5)
}
PtpTimeInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The scaledNanoseconds member is the time interval expressed in units of nanoseconds and multiplied by
2^+16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the
largest positive and negative values of the data type respectively.
For example: 2.5 ns is expressed as: (hex) 0x0000 0000 0002 8000"
REFERENCE
"IEEE 1588-2008 Standard for a Precision Clock
Synchronization Protocol for Networked
Measurement and Control Systems"
SYNTAX OCTET STRING (SIZE (8))
PtpTimeStamp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"first 48 bit: seconds since 1.1.1970
last 32 bit: nanoseconds"
REFERENCE
"IEEE P1588 Standard "
SYNTAX OCTET STRING (SIZE (10))
PtpPortIdentity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The PtpPortIdentity type identifies a PTP port.
The first 8 octets within this value specifies the ClockIdentity.
The last 2 octets within this value specifies the port number.
For example: '00 80 63 FF FF 00 00 00 00 01'. ClockIdentity is
'008063FFFF000000' and port number is '0001'"
REFERENCE
"IEEE 1588-2008 Standard for a Precision Clock
Synchronization Protocol for Networked
Measurement and Control Systems"
SYNTAX OCTET STRING (SIZE (10))
PtpClockIdentity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The PtpClockIdentity type identifies a PTP clock.
The PtpClockIdentity shall be in the IEEE EUI-64
format.
For example: '008063FFFF000000'"
REFERENCE
"IEEE 1588-2008 Standard for a Precision Clock
Synchronization Protocol for Networked
Measurement and Control Systems"
SYNTAX OCTET STRING (SIZE (8))
PtpClockQuality ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The PtpClockQuality represents the quality of a clock.
The first octet represents the clock class. The second
octet represents the clockAccuracy and the last two octets
represent the offsetScaledLogVariance
For example: "
REFERENCE
"IEEE 1588-2008 Standard for a Precision Clock
Synchronization Protocol for Networked
Measurement and Control Systems"
SYNTAX OCTET STRING (SIZE (4))
--
-- *************************************************************
-- hm2TimeSyncMib
-- *************************************************************
--
hm2TimeSyncMibNotifications OBJECT IDENTIFIER ::= { hm2TimeSyncMib 0 }
hm2TimeSyncMibObjects OBJECT IDENTIFIER ::= { hm2TimeSyncMib 1 }
-- hm2TimeSyncMibConformance OBJECT IDENTIFIER ::= { hm2TimeSyncMib 2 }
hm2TimeSyncMibSNMPExtensionGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMib 3 }
--
-- *************************************************************
-- hm2TimeSyncMib groups
-- *************************************************************
--
hm2SystemTimeGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibObjects 1 }
hm2SntpGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibObjects 2 }
hm2NtpGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibObjects 3 }
hm2PtpGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibObjects 4 }
hm2IrigGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibObjects 5 }
hm2Dot1asGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibObjects 6 }
--
-- *************************************************************
-- hm2SystemTimeGroup
-- *************************************************************
--
hm2SystemUtcTime OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time measured in seconds since 00:00:00 UTC, January 1, 1970.
The clock of the device may be set using this variable."
::= { hm2SystemTimeGroup 1 }
hm2SystemTimeSource OBJECT-TYPE
SYNTAX INTEGER {
local (1),
sntp (2),
ntp (3),
ptp (4),
gps (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the source of the system time."
::= { hm2SystemTimeGroup 2 }
hm2SystemLocalTime OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current local time. This includes the timezone offset and if supported summertime offset.
Measured in seconds since 00:00:00, January 1, 1970."
::= { hm2SystemTimeGroup 3 }
hm2SystemLocalOffset OBJECT-TYPE
SYNTAX Integer32 (-780..840)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The difference between the local timezone and UTC in minutes."
DEFVAL { 60 }
::= { hm2SystemTimeGroup 4 }
--
-- *************************************************************
-- hm2Sntp groups
-- *************************************************************
--
hm2SntpServerGroup OBJECT IDENTIFIER ::= { hm2SntpGroup 1 }
hm2SntpServerBroadcastGroup OBJECT IDENTIFIER ::= { hm2SntpGroup 2 }
hm2SntpClientGroup OBJECT IDENTIFIER ::= { hm2SntpGroup 3 }
--
-- *************************************************************
-- hm2SNTPServer group
-- *************************************************************
--
hm2SntpServerAdminState OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables SNTP server admin mode."
DEFVAL { disable }
::= { hm2SntpServerGroup 1 }
hm2SntpServerPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local port number used to listen for client requests."
DEFVAL { 123 }
::= { hm2SntpServerGroup 2 }
hm2SntpServerOnlyIfSync OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNTP server is enabled only if synchronized
to another external time reference. (e.g. NTP or PTP)."
REFERENCE
"RFC4330 - 6. SNTP Server Operations"
DEFVAL { disable }
::= { hm2SntpServerGroup 3 }
hm2SntpServerStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
notSynchronized(2),
syncToLocal(3),
syncToRefclock(4),
syncToRemoteServer(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational status of the SNTP server."
::= { hm2SntpServerGroup 4 }
hm2SntpServerInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface used by the SNTP server."
DEFVAL { 0 }
::= { hm2SntpServerGroup 5 }
--
-- *************************************************************
-- hm2SNTPServerBroadcast group
-- *************************************************************
--
hm2SntpServerBroadcastAdminState OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables SNTP server broadcast admin mode."
DEFVAL { disable }
::= { hm2SntpServerBroadcastGroup 1 }
hm2SntpServerBroadcastAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Address type."
DEFVAL { ipv4 }
::= { hm2SntpServerBroadcastGroup 2 }
hm2SntpServerBroadcastAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination address for SNTP broadcast or
multicast."
DEFVAL { '00000000'h }
::= { hm2SntpServerBroadcastGroup 3 }
hm2SntpServerBroadcastPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number to send the broadcast packets
to the clients."
DEFVAL { 123 }
::= { hm2SntpServerBroadcastGroup 4 }
hm2SntpServerBroadcastInterval OBJECT-TYPE
SYNTAX Integer32 (64..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of SNTP broadcast messages send in seconds."
REFERENCE
"RFC4330 - 6. SNTP Server Operations"
DEFVAL { 128 }
::= { hm2SntpServerBroadcastGroup 5 }
hm2SntpServerBroadcastVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SntpServerBroadcastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all VLANs used for SNTP server
broadcast or multicast messages."
::= { hm2SntpServerBroadcastGroup 10 }
hm2SntpServerBroadcastVlanEntry OBJECT-TYPE
SYNTAX Hm2SntpServerBroadcastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SNTP broadcast server VLAN objects."
INDEX { hm2SntpServerBroadcastVlan }
::= { hm2SntpServerBroadcastVlanTable 1 }
Hm2SntpServerBroadcastVlanEntry ::= SEQUENCE {
hm2SntpServerBroadcastVlan Integer32,
hm2SntpServerBroadcastVlanRowStatus RowStatus
}
-- *************************************************************
-- hm2SntpServerBroadcastVlanEntry
-- *************************************************************
hm2SntpServerBroadcastVlan OBJECT-TYPE
SYNTAX Integer32 (1..4042)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN used for SNTP server broadcast or multicast messages."
::= { hm2SntpServerBroadcastVlanEntry 1 }
hm2SntpServerBroadcastVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can by changed while the status
is 'active'."
::= { hm2SntpServerBroadcastVlanEntry 2 }
--
-- *************************************************************
-- hm2SntpClient group
-- *************************************************************
--
hm2SntpClientAdminState OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the SNTP client admin mode."
DEFVAL { disable }
::= { hm2SntpClientGroup 1 }
hm2SntpClientOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
unicast (1),
broadcast (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables SNTP client operating mode.
In 'unicast' mode, the client sends a request
to a designated unicast server and expects a
reply from that server.
In 'broadcast' client mode, it sends no request and waits for
a broadcast from one or more broadcast servers."
REFERENCE
"RFC4330 - 5. SNTP Client Operations"
DEFVAL { unicast }
::= { hm2SntpClientGroup 2 }
hm2SntpClientDisableAfterSync OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 'enable' the SNTP client is
disabled after the device is synchronized the first
time successfully to a SNTP server."
DEFVAL { disable }
::= { hm2SntpClientGroup 3 }
hm2SntpClientRequestInterval OBJECT-TYPE
SYNTAX Integer32 (5..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP client request interval in seconds."
DEFVAL { 30 }
::= { hm2SntpClientGroup 4 }
hm2SntpClientStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
notSynchronized(2),
synchronizedToRemoteServer(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overall operational status of the SNTP client."
::= { hm2SntpClientGroup 5 }
hm2SntpClientBroadcastRecvTimeout OBJECT-TYPE
SYNTAX Integer32 (128..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time in seconds after the client in broadcast client mode
will change the status from 'synchronizedToRemoteServer'
to 'notSynchronized' if no broadcast packets are received."
DEFVAL { 320 }
::= { hm2SntpClientGroup 6 }
hm2SntpClientInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface used by the SNTP client."
DEFVAL { 0 }
::= { hm2SntpClientGroup 7 }
hm2SntpClientServerAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SntpClientServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects to configure
SNTP client connections."
::= { hm2SntpClientGroup 10 }
hm2SntpClientServerAddrEntry OBJECT-TYPE
SYNTAX Hm2SntpClientServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SNTP client connection objects."
INDEX { hm2SntpClientServerIndex }
::= { hm2SntpClientServerAddrTable 1 }
Hm2SntpClientServerAddrEntry ::= SEQUENCE {
hm2SntpClientServerIndex Integer32,
hm2SntpClientServerAddrType InetAddressType,
hm2SntpClientServerAddr InetAddress,
hm2SntpClientServerPort InetPortNumber,
hm2SntpClientServerDescr DisplayString,
hm2SntpClientServerStatus INTEGER,
hm2SntpClientServerRowStatus RowStatus
}
-- *************************************************************
-- hm2SntpClientServer entry
-- *************************************************************
hm2SntpClientServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for server table."
::= { hm2SntpClientServerAddrEntry 1 }
hm2SntpClientServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Address type."
DEFVAL { ipv4 }
::= { hm2SntpClientServerAddrEntry 2 }
hm2SntpClientServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the external time server."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { hm2SntpClientServerAddrEntry 3 }
hm2SntpClientServerPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of the external time server."
DEFVAL { 123 }
::= { hm2SntpClientServerAddrEntry 4 }
hm2SntpClientServerDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of the server configured."
::= { hm2SntpClientServerAddrEntry 5 }
hm2SntpClientServerStatus OBJECT-TYPE
SYNTAX HmSntpClientServerStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the SNTP client - server connection."
::= { hm2SntpClientServerAddrEntry 6 }
hm2SntpClientServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can by changed while the status
is 'active'."
::= { hm2SntpClientServerAddrEntry 7 }
--
-- *************************************************************
-- hm2NtpGroup
-- *************************************************************
--
hm2NtpGeneralGroup OBJECT IDENTIFIER ::= { hm2NtpGroup 1 }
hm2NtpOperatingState OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
notSynchronized(2),
syncToLocal(3),
syncToRefclock(4),
syncToRemoteServer(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational status of the NTP server/client."
::= { hm2NtpGeneralGroup 1 }
hm2NtpServerGroup OBJECT IDENTIFIER ::= { hm2NtpGroup 2 }
hm2NtpServerConfigGroup OBJECT IDENTIFIER ::= { hm2NtpServerGroup 1 }
hm2NtpServerAdminState OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the NTP server."
DEFVAL { disable }
::= { hm2NtpServerConfigGroup 1 }
hm2NtpServerOperatingMode OBJECT-TYPE
SYNTAX INTEGER { symmetric(1), client-server(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP server operating mode."
DEFVAL { client-server }
::= { hm2NtpServerConfigGroup 2 }
hm2NtpServerLocalClockStratum OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stratum to be used for the case that
the server is only synchronized to the local clock"
DEFVAL { 12 }
::= { hm2NtpServerConfigGroup 3 }
hm2NtpClientGroup OBJECT IDENTIFIER ::= { hm2NtpGroup 3 }
hm2NtpClientConfigGroup OBJECT IDENTIFIER ::= { hm2NtpClientGroup 1 }
hm2NtpClientAdminState OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the NTP client."
DEFVAL { disable }
::= { hm2NtpClientConfigGroup 1 }
hm2NtpClientOperatingMode OBJECT-TYPE
SYNTAX INTEGER { unicast(1), broadcast(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP client operating mode."
DEFVAL { unicast }
::= { hm2NtpClientConfigGroup 2 }
hm2NtpClientServerAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2NtpClientServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains variables for each interface of
the switch."
::= { hm2NtpClientGroup 4 }
hm2NtpClientServerAddrEntry OBJECT-TYPE
SYNTAX Hm2NtpClientServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains variables for each interface of
the switch."
INDEX { hm2NtpClientServerIndex }
::= { hm2NtpClientServerAddrTable 1 }
Hm2NtpClientServerAddrEntry ::= SEQUENCE {
hm2NtpClientServerIndex Integer32,
hm2NtpClientServerAddressType InetAddressType,
hm2NtpClientServerAddress InetAddress,
hm2NtpClientServerPort InetPortNumber,
hm2NtpClientServerInitialBurst HmEnabledStatus,
hm2NtpClientServerBurst HmEnabledStatus,
hm2NtpClientServerPrefer TruthValue,
hm2NtpClientServerStatus INTEGER,
hm2NtpClientServerRowStatus RowStatus
}
hm2NtpClientServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for Server table."
::= { hm2NtpClientServerAddrEntry 1 }
hm2NtpClientServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Address type for external time server.
Currently, only IPv4, IPv6 and DNS are supported."
DEFVAL { ipv4 }
::= { hm2NtpClientServerAddrEntry 2 }
hm2NtpClientServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the external time server."
DEFVAL { '00000000'H }
::= { hm2NtpClientServerAddrEntry 3 }
hm2NtpClientServerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of the external time server. Zero is not allowed
as port number."
DEFVAL { 123 }
::= { hm2NtpClientServerAddrEntry 4 }
hm2NtpClientServerInitialBurst OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The initial burst is intended to speed up the initial synchronization.
Use with caution as it can cause a overload situation on the server."
REFERENCE
"RFC5905 - 52. Poll Process Operations"
DEFVAL { disable }
::= { hm2NtpClientServerAddrEntry 5 }
hm2NtpClientServerBurst OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The burst mode can be used to increase the precision
on links with high jitter e.g. GSM/UMTS links"
REFERENCE
"RFC5905 - 52. Poll Process Operations"
DEFVAL { disable }
::= { hm2NtpClientServerAddrEntry 6 }
hm2NtpClientServerPrefer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefer flag can be used to mark the peer as preferred.
Among a set of correctly operating peers, this one will be chosen
as synchronization source."
REFERENCE
"RFC5905 - 96. System Process"
DEFVAL { false }
::= { hm2NtpClientServerAddrEntry 7 }
hm2NtpClientServerStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
protocolError(2),
notSynchronized(3),
notResponding(4),
synchronizing(5),
synchronized(6),
genericError(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the NTP client server connection."
::= { hm2NtpClientServerAddrEntry 10 }
hm2NtpClientServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can be changed while the status
is 'active'."
::= { hm2NtpClientServerAddrEntry 11 }
hm2NtpClientListenAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2NtpClientListenAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client table."
::= { hm2NtpClientGroup 5 }
hm2NtpClientListenAddrEntry OBJECT-TYPE
SYNTAX Hm2NtpClientListenAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client entry."
INDEX { hm2NtpClientListenAddrIndex }
::= { hm2NtpClientListenAddrTable 1 }
Hm2NtpClientListenAddrEntry ::= SEQUENCE {
hm2NtpClientListenAddrIndex Integer32,
hm2NtpClientListenAddrAddressType InetAddressType,
hm2NtpClientListenAddrAddress InetAddress,
hm2NtpClientListenAddrPort InetPortNumber,
hm2NtpClientListenAddrStatus INTEGER,
hm2NtpClientListenAddrRowStatus RowStatus
}
hm2NtpClientListenAddrIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for server table."
::= { hm2NtpClientListenAddrEntry 1 }
hm2NtpClientListenAddrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Address type for external time server.
Currently, only IPv4, IPv6 and DNS are supported."
DEFVAL { ipv4 }
::= { hm2NtpClientListenAddrEntry 2 }
hm2NtpClientListenAddrAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the external time server."
DEFVAL { '00000000'H }
::= { hm2NtpClientListenAddrEntry 3 }
hm2NtpClientListenAddrPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of the external time server. Zero is not allowed
as port number."
DEFVAL { 123 }
::= { hm2NtpClientListenAddrEntry 4 }
hm2NtpClientListenAddrStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
protocolError(2),
notSynchronized(3),
notResponding(4),
synchronizing(5),
synchronized(6),
genericError(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the NTP client server connection."
::= { hm2NtpClientListenAddrEntry 10 }
hm2NtpClientListenAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can by changed while the status
is 'active'."
::= { hm2NtpClientListenAddrEntry 11 }
--
-- *************************************************************
-- hm2PtpGroup
-- *************************************************************
--
hm2PtpGlobal OBJECT IDENTIFIER ::= { hm2PtpGroup 1 }
hm2PtpEnable OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the Precision Time Protocol (PTP)
on this node."
DEFVAL { disable }
::= { hm2PtpGlobal 1 }
hm2PtpClockMode OBJECT-TYPE
SYNTAX INTEGER {
v2-boundary-clock (2),
v2-transparent-clock (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This members value shall indicate which clock mode is used."
DEFVAL { v2-transparent-clock }
::= { hm2PtpGlobal 2 }
hm2PtpProfile OBJECT-TYPE
SYNTAX INTEGER {
user-defined (1),
default-e2e (2),
default-p2p (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures PTP parameters to a specific profile. Setting the object
to user-defined (1) has no effect."
DEFVAL { default-e2e }
::= { hm2PtpGlobal 3 }
hm2PtpIsSynchronized OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the clock is synchronized to the current Master this object is set to true.
Otherwise it is set to false. The clock sets this object to true, if the offset (ns)
to the current Master is less than hm2PtpSyncLowerBound. The clock sets this object to false,
if the offset (ns) to the current Master is bigger than hm2PtpSyncUpperBound."
::= { hm2PtpGlobal 4 }
hm2PtpSyncLowerBound OBJECT-TYPE
SYNTAX Integer32(1..999999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines when the hm2PtpIsSynchronized object is set to true.
If the absolute value of the offset is smaller than hm2PtpSyncLowerBound,
the hm2PtpIsSynchronized is set true.
The value is interpreted as nanoseconds."
DEFVAL { 30 }
::= { hm2PtpGlobal 5 }
hm2PtpSyncUpperBound OBJECT-TYPE
SYNTAX Integer32(31..1000000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines when the hm2PtpIsSynchronized object is set to false.
If the absolute value of the offset is bigger than hm2PtpSyncUpperBound, the hm2PtpIsSynchronized is set false.
The value is interpreted as nanoseconds."
DEFVAL { 5000 }
::= { hm2PtpGlobal 6 }
hm2PtpAbsMaxOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This members value shall indicate the absolute value for the maximum offset between its parent and this node.
The value is set to zero if the offset is the first time smaller than hm2PtpSyncLowerBound.
Offsets bigger than +/-1 second are indicated by the maximum value."
::= { hm2PtpGlobal 7 }
hm2PtpTimeSeconds OBJECT-TYPE
SYNTAX PtpTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PTP time in PTP timescale"
::= { hm2PtpGlobal 8 }
hm2PtpManagement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true PTP management via PTP management messages is enabled."
DEFVAL { false }
::= { hm2PtpGlobal 9 }
--
-- ptp2-group (IEEE 1588-2008) --
--
hm2Ptp2Objects OBJECT IDENTIFIER ::= { hm2PtpGroup 2 }
hm2Ptp2Configuration OBJECT IDENTIFIER ::= { hm2Ptp2Objects 1 }
hm2Ptp2TwoStepClock OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of true indicates that this node is a two-step device."
::= { hm2Ptp2Configuration 1 }
hm2Ptp2ClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is the clock identity of the local clock."
::= { hm2Ptp2Configuration 2 }
hm2Ptp2ClockQuality OBJECT-TYPE
SYNTAX PtpClockQuality
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Clock quality of the local clock."
::= { hm2Ptp2Configuration 3 }
hm2Ptp2ClockClass OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First octet of hm2Ptp2ClockQuality. This represents the clock class of the local clock."
::= { hm2Ptp2Configuration 4 }
hm2Ptp2ClockAccuracy OBJECT-TYPE
SYNTAX INTEGER {
within25ns(32), -- 20H
within100ns(33), -- 21H
within250ns(34), -- 22H
within1000ns(35), -- 23H
within2500ns(36), -- 24H
within10us(37), -- 25H
within25us(38), -- 26H
within100us(39), -- 27H
within250us(40), -- 28H
within1000us(41), -- 29H
within2500us(42), -- 2AH
within10ms(43), -- 2BH
within25ms(44), -- 2CH
within100ms(45), -- 2DH
within250ms(46), -- 2EH
within1s(47), -- 2FH
within10s(48), -- 30H
beyond10s(49), -- 31H
unknown(254) -- FEH
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second octet of hm2Ptp2ClockQuality. This represents the clock accuracy of the local clock."
::= { hm2Ptp2Configuration 5 }
hm2Ptp2ClockVariance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last two octets of hm2Ptp2ClockQuality. This represents the clock variance of the local clock."
::= { hm2Ptp2Configuration 6 }
hm2Ptp2Priority1 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority 1 value of the local clock"
DEFVAL { 128 }
::= { hm2Ptp2Configuration 7 }
hm2Ptp2Priority2 OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority 2 value of the local clock"
DEFVAL { 128 }
::= { hm2Ptp2Configuration 8 }
hm2Ptp2DomainNumber OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PTP domain number of the local clock."
DEFVAL { 0 }
::= { hm2Ptp2Configuration 9 }
hm2Ptp2StepsRemoved OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of hm2Ptp2StepsRemoved is the number of communication paths traversed between the local
clock and the grandmaster clock."
::= { hm2Ptp2Configuration 10 }
hm2Ptp2OffsetFromMaster OBJECT-TYPE
SYNTAX PtpTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value of the time difference between master and slave measured by this clock."
::= { hm2Ptp2Configuration 11 }
hm2Ptp2MeanPathDelay OBJECT-TYPE
SYNTAX PtpTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value of the mean propagation time (e2e-delay) between Master and Slave.
This is only valid if hm2Ptp2DelayMechanism is set to e2e on the current slave port."
::= { hm2Ptp2Configuration 12 }
hm2Ptp2ParentPortIdentity OBJECT-TYPE
SYNTAX PtpPortIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identity value of the port on the master that issues the synchronization
messages used to synchronize this clock."
::= { hm2Ptp2Configuration 13 }
hm2Ptp2ParentStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of True indicates that the objects hm2Ptp2ObservedParentOffsetScaledLogVariance
and hm2Ptp2ObservedParentClockPhaseChangeRate are valid."
::= { hm2Ptp2Configuration 14 }
hm2Ptp2ObservedParentOffsetScaledLogVariance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimate of the parent clocks PTP variance observed by this clock."
::= { hm2Ptp2Configuration 15 }
hm2Ptp2ObservedParentClockPhaseChangeRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimate of the phase change rate (drift) observed by this clock."
::= { hm2Ptp2Configuration 16 }
hm2Ptp2GrandmasterIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ClockIdentity of the Grandmaster clock synchronizing this clock."
::= { hm2Ptp2Configuration 17 }
hm2Ptp2GrandmasterClockQuality OBJECT-TYPE
SYNTAX PtpClockQuality
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ClockQuality of the Grandmaster clock synchronizing this clock."
::= { hm2Ptp2Configuration 18 }
hm2Ptp2GrandmasterClockClass OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First octet of hm2Ptp2GrandmasterClockQuality. This represents the grand masters clock class."
::= { hm2Ptp2Configuration 19 }
hm2Ptp2GrandmasterClockAccuracy OBJECT-TYPE
SYNTAX INTEGER {
within25ns(32), -- 20H
within100ns(33), -- 21H
within250ns(34), -- 22H
within1000ns(35), -- 23H
within2500ns(36), -- 24H
within10us(37), -- 25H
within25us(38), -- 26H
within100us(39), -- 27H
within250us(40), -- 28H
within1000us(41), -- 29H
within2500us(42), -- 2AH
within10ms(43), -- 2BH
within25ms(44), -- 2CH
within100ms(45), -- 2DH
within250ms(46), -- 2EH
within1s(47), -- 2FH
within10s(48), -- 30H
beyond10s(49), -- 31H
unknown(254) -- FEH
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second octet of hm2Ptp2GrandmasterClockAccuracy. This represents the grand masters clock accuracy."
::= { hm2Ptp2Configuration 20 }
hm2Ptp2GrandmasterClockVariance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last two octets of hm2Ptp2GrandmasterClockQuality. This represents the grand masters clock variance."
::= { hm2Ptp2Configuration 21 }
hm2Ptp2GrandmasterPriority1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority 1 value of the grand master clock."
::= { hm2Ptp2Configuration 22 }
hm2Ptp2GrandmasterPriority2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority 2 value of the grand master clock."
::= { hm2Ptp2Configuration 23 }
hm2Ptp2CurrentUtcOffset OBJECT-TYPE
SYNTAX Integer32 (-32768..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current difference between the PTP timescale (TAI) and UTC in seconds."
DEFVAL { 37 }
::= { hm2Ptp2Configuration 24 }
hm2Ptp2CurrentUtcOffsetValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of True indicates that the hm2Ptp2CurrentUtcOffset is known to be correct."
DEFVAL { false }
::= { hm2Ptp2Configuration 25 }
hm2Ptp2Leap59 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of true indicates that the last minute of the current UTC day contains 59 seconds."
::= { hm2Ptp2Configuration 26 }
hm2Ptp2Leap61 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of true indicates that the last minute of the current UTC day contains 61 seconds."
::= { hm2Ptp2Configuration 27 }
hm2Ptp2TimeTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of True indicates that the current time is traceable to a primary reference."
::= { hm2Ptp2Configuration 28 }
hm2Ptp2FrequencyTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of True indicates that the frequency determining
the timescale is traceable to a primary reference."
::= { hm2Ptp2Configuration 29 }
hm2Ptp2PtpTimescale OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of True indicates that the clocks timescale is PTP."
::= { hm2Ptp2Configuration 30 }
hm2Ptp2TimeSource OBJECT-TYPE
SYNTAX INTEGER {
atomicClock(16), -- 10H
gps(32), -- 20H
terrestrialRadio(48), -- 30H
ptp(64), -- 40H
ntp(80), --50H
handSet(96), --60H
other(144), --90H
internalOscillator(160) --A0H
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source of time used by the Grandmaster clock."
DEFVAL { internalOscillator }
::= { hm2Ptp2Configuration 31 }
hm2Ptp2PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2Ptp2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains variables for each PTP2 port of
the switch."
::= { hm2Ptp2Objects 2 }
hm2Ptp2PortEntry OBJECT-TYPE
SYNTAX Hm2Ptp2PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for one port."
INDEX { ifIndex }
::= { hm2Ptp2PortTable 1 }
Hm2Ptp2PortEntry ::= SEQUENCE {
hm2Ptp2PortEnable HmEnabledStatus,
hm2Ptp2PortState INTEGER,
hm2Ptp2LogDelayReqInterval Integer32,
hm2Ptp2PeerMeanPathDelay PtpTimeInterval,
hm2Ptp2LogAnnounceInterval INTEGER,
hm2Ptp2AnnounceReceiptTimeout Integer32,
hm2Ptp2LogSyncInterval INTEGER,
hm2Ptp2DelayMechanism INTEGER,
hm2Ptp2LogPdelayReqInterval Hm2Ptp2LogPdelayReqIntervalTc,
hm2Ptp2VersionNumber INTEGER,
hm2Ptp2NetworkProtocol INTEGER,
hm2Ptp2V1Compatibility INTEGER,
hm2Ptp2DelayAsymmetry Integer32,
hm2Ptp2PortCapability BITS,
hm2Ptp2VlanID Integer32,
hm2Ptp2VlanPriority Integer32
}
hm2Ptp2PortEnable OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the sending and receiving / processing of PTP synchronization messages."
DEFVAL { enable }
::= { hm2Ptp2PortEntry 1 }
hm2Ptp2PortState OBJECT-TYPE
SYNTAX INTEGER {
initializing (1),
faulty (2),
disabled (3),
listening (4),
pre-master (5),
master (6),
passive (7),
uncalibrated (8),
slave (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the PTP2 port instance."
::= { hm2Ptp2PortEntry 2 }
hm2Ptp2LogDelayReqInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Logarithm to the base of 2 of the minimum DelayRequest interval used to measure the e2e-delay."
::= { hm2Ptp2PortEntry 3 }
hm2Ptp2PeerMeanPathDelay OBJECT-TYPE
SYNTAX PtpTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If hm2Ptp2DelayMechanism is set to p2p this value is an estimate of the current one-way propagation delay (p2p-delay)."
::= { hm2Ptp2PortEntry 4 }
hm2Ptp2LogAnnounceInterval OBJECT-TYPE
SYNTAX INTEGER {
sec-1 (0),
sec-2 (1),
sec-4 (2),
sec-8 (3),
sec-16 (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Logarithm to the base of 2 of the mean announce interval."
DEFVAL { sec-2 }
::= { hm2Ptp2PortEntry 5 }
hm2Ptp2AnnounceReceiptTimeout OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Announce receipt timeout in multiples of hm2Ptp2LogAnnounceInterval."
DEFVAL { 3 }
::= { hm2Ptp2PortEntry 6 }
hm2Ptp2LogSyncInterval OBJECT-TYPE
SYNTAX Hm2Ptp2LogSyncIntervalTc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Logarithm to the base of 2 of the mean synchronization interval."
DEFVAL { sec-1 }
::= { hm2Ptp2PortEntry 7 }
hm2Ptp2DelayMechanism OBJECT-TYPE
SYNTAX INTEGER {
e2e(1),
p2p(2),
disabled(254) -- FEH
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value indicates the propagation delay measuring option used by this port."
DEFVAL { e2e }
::= { hm2Ptp2PortEntry 8 }
hm2Ptp2LogPdelayReqInterval OBJECT-TYPE
SYNTAX Hm2Ptp2LogPdelayReqIntervalTc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay)."
DEFVAL { sec-1 }
::= { hm2Ptp2PortEntry 9 }
hm2Ptp2VersionNumber OBJECT-TYPE
SYNTAX INTEGER {
ptpVersion1 (1),
ptpVersion2 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PTP version in use on this port (always ptpVersion2)."
DEFVAL { ptpVersion2 }
::= { hm2Ptp2PortEntry 10 }
hm2Ptp2NetworkProtocol OBJECT-TYPE
SYNTAX INTEGER {
udpIpv4 (1),
ieee8023 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current configured network transport protocol of this port."
DEFVAL { ieee8023 }
::= { hm2Ptp2PortEntry 11 }
hm2Ptp2V1Compatibility OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2),
auto (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to on all PTPv2 messages will be padded to the length of a PTPv1 frame. This is required by some hardware."
DEFVAL { auto }
::= { hm2Ptp2PortEntry 12 }
hm2Ptp2DelayAsymmetry OBJECT-TYPE
SYNTAX Integer32(-2000000000..2000000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Asymmetry of the link connected to this port in nanoseconds.
The hm2Ptp2DelayAsymmetry is positive when the master-to-slave
propagation time is longer than the slave-to-master propagation time."
DEFVAL { 0 }
::= { hm2Ptp2PortEntry 13 }
hm2Ptp2PortCapability OBJECT-TYPE
SYNTAX BITS {
reserved(0),
one-step(1),
e2e-delay(2),
p2p-delay(3),
ptp2Ieee8023(4),
ptp2UdpIpv4(5),
ptp2UdpIpv6(6),
asymmCorrection(7),
halfDuplex(8),
ptp2UdpE2EGlobal(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the capability of the ptp port."
::= { hm2Ptp2PortEntry 14 }
hm2Ptp2VlanID OBJECT-TYPE
SYNTAX Integer32(-1..4042)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN in which PTP packets are send. With a value of -1 all packets are send untagged"
DEFVAL { -1 }
::= { hm2Ptp2PortEntry 15 }
hm2Ptp2VlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN priority of tagged ptp packets"
DEFVAL { 6 }
::= { hm2Ptp2PortEntry 16 }
--
-- hm2Ptp2TCConfiguration / Transparent Clock configuration (IEEE1588-2008) --
--
hm2Ptp2TCObjects OBJECT IDENTIFIER ::= { hm2PtpGroup 3 }
hm2Ptp2TCConfiguration OBJECT IDENTIFIER ::= { hm2Ptp2TCObjects 1 }
hm2Ptp2TCClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is the clock identity of the transparent clock."
::= { hm2Ptp2TCConfiguration 1 }
hm2Ptp2TCDelayMechanism OBJECT-TYPE
SYNTAX INTEGER{
e2e(1),
p2p(2),
e2e-optimized(3),
disabled(254) -- FEH
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the transparent clock to be either a e2e- or p2p-transparent clock.
If supported a value of e2e-optimized sets the clock to e2e mode where delay requests
are only forwarded on the port where the current Master (hm2Ptp2TCCurrentMaster) is connected."
DEFVAL { e2e }
::= { hm2Ptp2TCConfiguration 2 }
hm2Ptp2TCPrimaryDomain OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PTP domain number of the primary syntonization domain."
DEFVAL { 0 }
::= { hm2Ptp2TCConfiguration 3 }
hm2Ptp2TCSyntonized OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of true indicates that the syntonization of the transparent clock is enabled."
DEFVAL { true }
::= { hm2Ptp2TCConfiguration 4 }
hm2Ptp2TCNetworkProtocol OBJECT-TYPE
SYNTAX INTEGER {
udpIpv4 (1),
ieee8023 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current configured network transport protocol of the transparent clock."
DEFVAL { ieee8023 }
::= { hm2Ptp2TCConfiguration 5 }
hm2Ptp2TCCurrentMaster OBJECT-TYPE
SYNTAX PtpPortIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identity value of the port on the master that issues the synchronization
messages used to syntonize/synchronize this clock."
::= { hm2Ptp2TCConfiguration 6 }
hm2Ptp2TCMultiDomainMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to false, PTP messages from domains other than hm2Ptp2TCPrimaryDomain are ignored."
DEFVAL { false }
::= { hm2Ptp2TCConfiguration 7 }
hm2Ptp2TCSyncLocalClock OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable synchronisation of the local clock (TC hybrid mode). This requires syntonization to be enabled.
All transparent clock operations are still done based on the syntonized clock."
DEFVAL { false }
::= { hm2Ptp2TCConfiguration 8 }
hm2Ptp2TCOffsetFromMaster OBJECT-TYPE
SYNTAX PtpTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value of the time difference between Master and this clock measured by this clock.
This object is only valid if hm2Ptp2TCSyncLocalClock is set to true."
::= { hm2Ptp2TCConfiguration 9 }
hm2Ptp2TCMeanPathDelay OBJECT-TYPE
SYNTAX PtpTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value of the mean propagation time (e2e-delay) between Master and Slave.
This object is only valid for e2e-transparent-clock and hm2Ptp2TCSyncLocalClock is set to true."
::= { hm2Ptp2TCConfiguration 10 }
hm2Ptp2TCVlanID OBJECT-TYPE
SYNTAX Integer32(-1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN in which PTP packets are send. With a value of -1 all packets are send untagged."
DEFVAL { -1 }
::= { hm2Ptp2TCConfiguration 11 }
hm2Ptp2TCVlanPriority OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN priority of tagged PTP packets."
DEFVAL { 6 }
::= { hm2Ptp2TCConfiguration 12 }
hm2Ptp2TCCapability OBJECT-TYPE
SYNTAX BITS {
reserved(0),
one-step(1),
e2e-delay(2),
p2p-delay(3),
ptp2Ieee8023(4),
ptp2UdpIpv4(5),
ptp2UdpIpv6(6),
asymmCorrection(7),
halfDuplex(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the capability of the TC."
::= { hm2Ptp2TCConfiguration 13 }
hm2Ptp2TCPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2Ptp2TCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains variables for each PTP2 TC port of
the switch."
::= { hm2Ptp2TCObjects 2 }
hm2Ptp2TCPortEntry OBJECT-TYPE
SYNTAX Hm2Ptp2TCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for one port."
INDEX { ifIndex }
::= { hm2Ptp2TCPortTable 1 }
Hm2Ptp2TCPortEntry ::= SEQUENCE {
hm2Ptp2TCPortEnable HmEnabledStatus,
hm2Ptp2TCLogPdelayReqInterval Hm2Ptp2LogPdelayReqIntervalTc,
hm2Ptp2TCFaulty TruthValue,
hm2Ptp2TCPeerMeanPathDelay PtpTimeInterval,
hm2Ptp2TCDelayAsymmetry Integer32
}
hm2Ptp2TCPortEnable OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the sending and receiving / processing of PTP synchronization messages."
DEFVAL { enable }
::= { hm2Ptp2TCPortEntry 1 }
hm2Ptp2TCLogPdelayReqInterval OBJECT-TYPE
SYNTAX Hm2Ptp2LogPdelayReqIntervalTc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay)."
DEFVAL { sec-1 }
::= { hm2Ptp2TCPortEntry 2 }
hm2Ptp2TCFaulty OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if port is in Faulty state."
::= { hm2Ptp2TCPortEntry 3 }
hm2Ptp2TCPeerMeanPathDelay OBJECT-TYPE
SYNTAX PtpTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is an estimate of the current one way propagation delay of a p2p-transparent-clock."
::= { hm2Ptp2TCPortEntry 4 }
hm2Ptp2TCDelayAsymmetry OBJECT-TYPE
SYNTAX Integer32(-2000000000..2000000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Asymmetry of the link connected to this port in nanoseconds.
The hm2Ptp2TCDelayAsymmetry is positive when the master-to-slave
propagation time is longer than the slave-to-master propagation time."
DEFVAL { 0 }
::= { hm2Ptp2TCPortEntry 5 }
-- *************************************************************
-- hm2IrigGroup
-- *************************************************************
hm2IrigAdminStatus OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the IRIG-B output."
DEFVAL { disable }
::= { hm2IrigGroup 1 }
hm2IrigMode OBJECT-TYPE
SYNTAX INTEGER {
irig-b000 (0),
irig-b001 (1),
irig-b002 (2),
irig-b003 (3),
irig-b004 (4),
irig-b005 (5),
irig-b006 (6),
irig-b007 (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IRIG Mode, allowed values:
(See https://wsmrc2vger.wsmr.army.mil/rcc/manuals/200-04/TT-45.pdf)
irig-b000 (0) - Mode IRIG B000, BCDtoy, CF, SBS
irig-b001 (1) - Mode IRIG B001, BCDtoy, CF
irig-b002 (2) - Mode IRIG B002, BCDtoy
irig-b003 (3) - Mode IRIG B003, BCDtoy, SBS
irig-b004 (4) - Mode IRIG B004, BCDtoy, BCDyear, CF, SBS
irig-b005 (5) - Mode IRIG B005, BCDtoy, BCDyear, CF
irig-b006 (6) - Mode IRIG B006, BCDtoy, BCDyear
irig-b007 (7) - Mode IRIG B007, BCDtoy, BCDyear, SBS
with
BCDtoy: binary coded decimal time of year
BCDyear: binary coded decimal year
CF: control functions
SBS: straight binary seconds of day
only modes b002,B003,B006 and b007 are supported."
DEFVAL { irig-b003 }
::= { hm2IrigGroup 2 }
hm2IrigPpsAdminStatus OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the pps output."
DEFVAL { disable }
::= { hm2IrigGroup 3 }
hm2IrigTimeMode OBJECT-TYPE
SYNTAX INTEGER {
utc (1),
local(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the IRIG-B time base (UTC or local)."
DEFVAL { utc }
::= { hm2IrigGroup 4 }
hm2IrigOperStatus OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current operational status of the IRIG-B output. "
::= { hm2IrigGroup 5 }
hm2IrigTimeQuality OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
within1ns(1),
within10ns(2),
within100ns(3),
within1us(4),
within10us(5),
within100us(6),
within1ms(7),
within10ms(8),
within100ms(9),
within1s(10),
within10s(11),
within100s(12),
within1000s(13),
within10000s(14),
failure(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current IRIG-B time quality according to IEEE 1344."
::= { hm2IrigGroup 6 }
--
-- *************************************************************
-- hm2Dot1asGroup
-- *************************************************************
--
hm2Dot1asGlobal OBJECT IDENTIFIER ::= { hm2Dot1asGroup 1 }
hm2Dot1asEnable OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the 802.1AS Protocol
on this node."
DEFVAL { disable }
::= { hm2Dot1asGlobal 1 }
hm2Dot1asIsSynchronized OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the clock is synchronized to the current Master this object is set to true.
Otherwise it is set to false. The clock sets this object to true, if the offset (ns)
to the current Master is less than hm2dot1asSyncLowerBound. The clock sets this object to false,
if the offset (ns) to the current Master is bigger than hm2dot1asSyncUpperBound."
::= { hm2Dot1asGlobal 2 }
hm2Dot1asSyncLowerBound OBJECT-TYPE
SYNTAX Integer32(1..999999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines when the hm2dot1asIsSynchronized object is set to true.
If the absolute value of the offset is smaller than hm2dot1asSyncLowerBound,
the hm2dot1asIsSynchronized is set true.
The value is interpreted as nanoseconds."
DEFVAL { 30 }
::= { hm2Dot1asGlobal 3 }
hm2Dot1asSyncUpperBound OBJECT-TYPE
SYNTAX Integer32(31..1000000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines when the hm2dot1asIsSynchronized object is set to false.
If the absolute value of the offset is bigger than hm2dot1asSyncUpperBound, the hm2dot1asIsSynchronized is set false.
The value is interpreted as nanoseconds."
DEFVAL { 5000 }
::= { hm2Dot1asGlobal 4 }
hm2Dot1asAbsMaxOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This members value shall indicate the absolute value for the maximum offset between its parent and this node.
The value is set to zero if the offset is the first time smaller than hm2dot1asSyncLowerBound.
Offsets bigger than +/-1 second are indicated by the maximum value."
::= { hm2Dot1asGlobal 5 }
-- ***********************************************************
-- hm2TimeSyncSNMPExtensionGroup
-- ***********************************************************
hm2TimeSyncSystemTimeSESGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibSNMPExtensionGroup 1 }
hm2TimeSyncSntpSESGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibSNMPExtensionGroup 2 }
hm2TimeSyncNtpSESGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibSNMPExtensionGroup 3 }
hm2TimeSyncPtpSESGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibSNMPExtensionGroup 4 }
hm2TimeSyncIrigSESGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibSNMPExtensionGroup 5 }
hm2TimeSyncDot1asSESGroup OBJECT IDENTIFIER ::= { hm2TimeSyncMibSNMPExtensionGroup 6 }
-- ***********************************************************
-- hm2TimeSyncSntpSESGroup
-- ***********************************************************
hm2TimeSyncSntpSESIpv4PortNumberPairInUse OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that the given IPv4 address / port number combination is already in use."
::= { hm2TimeSyncSntpSESGroup 1 }
hm2TimeSyncSntpSESDnsPortNumberPairInUse OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that the given DNS name / port number combination is already in use."
::= { hm2TimeSyncSntpSESGroup 2 }
hm2TimeSyncSntpSESIpv6PortNumberPairInUse OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that the given IPv6 address / port number combination is already in use."
::= { hm2TimeSyncSntpSESGroup 3 }
-- ***********************************************************
-- hm2TimeSyncPtpSESGroup
-- ***********************************************************
hm2TimeSyncPtpSESPortIsNotCapable OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that the given port number is not PTP capable."
::= { hm2TimeSyncPtpSESGroup 1 }
-- *************************************************************
-- Notifications
-- *************************************************************
-- *************************************************************
-- Ptp2 notifications
-- *************************************************************
hm2Ptp2SynchronizationChange NOTIFICATION-TYPE
OBJECTS { hm2PtpIsSynchronized }
STATUS current
DESCRIPTION
"This notification is sent if the PTP synchronization status is changed."
::= { hm2TimeSyncMibNotifications 1 }
-- *************************************************************
-- SNTP notifications
-- *************************************************************
hm2SntpClientSynchronizationChangeTrap NOTIFICATION-TYPE
OBJECTS { hm2SntpClientStatus }
STATUS current
DESCRIPTION
"This notification is sent if the SNTP synchronization status (hm2SntpClientStatus) is changed."
::= { hm2TimeSyncMibNotifications 10 }
-- *************************************************************
-- Dot1as notifications
-- *************************************************************
hm2Dot1asSynchronizationChange NOTIFICATION-TYPE
OBJECTS { hm2Dot1asIsSynchronized }
STATUS current
DESCRIPTION
"This notification is sent if the dot1as synchronization status is changed."
::= { hm2TimeSyncMibNotifications 20 }
END
View Git Blame Copy Permalink