WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/hirschmann/HM2-DIAGNOSTIC-MIB

2768 lines
85 KiB
Plaintext
Raw Permalink Blame History

HM2-DIAGNOSTIC-MIB DEFINITIONS ::= BEGIN
--
-- ***********************************************************
-- Hirschmann Diagnostic MIB
-- ***********************************************************
--
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
OBJECT-IDENTITY,
Integer32, Unsigned32 FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION,
TruthValue FROM SNMPv2-TC
ifIndex FROM IF-MIB
hm2ConfigurationMibs,
HmEnabledStatus,
HmTimeSeconds1970 FROM HM2-TC-MIB
hm2PSID FROM HM2-PWRMGMT-MIB
hm2IfacePhysIndex FROM HM2-DEVMGMT-MIB;
hm2DiagnosticMib MODULE-IDENTITY
LAST-UPDATED "201208280000Z" -- Aug 28, 2012
ORGANIZATION "Hirschmann Automation and Control GmbH"
CONTACT-INFO
"Postal: Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Phone: +49 7127 140
E-mail: hac.support@belden.com"
DESCRIPTION
"Hirschmann Diagnostic MIB.
Copyright (C) 2012. All Rights Reserved."
REVISION "201208280000Z" -- Aug 28, 2012
DESCRIPTION
" Type of LEDs available updated.
"
REVISION "201103160000Z" -- March 16, 2011
DESCRIPTION
"Initial version."
::= { hm2ConfigurationMibs 22 }
--
-- *************************************************************
-- Textual Conventions
-- *************************************************************
--
Hm2LedType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Types of LEDs available"
SYNTAX INTEGER {
power(1),
status(2),
rm(3),
envm(4),
i1(5),
i2(6)
}
Hm2LedStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Status of LEDs available"
SYNTAX INTEGER {
off(1),
greenSolid(2), -- Solid green
greenBlink1(3), -- Blinking green 1 time per period
greenBlink3(4), -- Blinking green 3 time per period
greenBlink4(5), -- Blinking green 4 time per period
greenBlink5(6), -- Blinking green 5 time per period
greenBlink5i(7), -- Blinking green 5 time per period inverse
yellowSolid(8), -- Solid yellow
yellowBlink1(9), -- Blinking yellow 1 time per period
yellowBlink3(10), -- Blinking yellow 3 time per period
yellowBlink4(11), -- Blinking yellow 4 time per period
yellowBlink5(12), -- Blinking yellow 5 time per period
redSolid(13), -- Solid red
redBlink1(14), -- Blinking red 1 time per period
redBlink3(15), -- Blinking red 3 time per period
redBlink4(16), -- Blinking red 4 time per period
redBlink5(17) -- Blinking red 5 time per period
}
--
-- ***********************************************************
-- hm2DiagnosticMib
-- ***********************************************************
--
hm2DiagnosticMibNotifications OBJECT IDENTIFIER ::= { hm2DiagnosticMib 0 }
hm2DiagnosticMibObjects OBJECT IDENTIFIER ::= { hm2DiagnosticMib 1 }
-- hm2DiagnosticMibConformance OBJECT IDENTIFIER ::= { hm2DiagnosticMib 2 }
hm2DiagnosticSNMPExtensionGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMib 3 }
--
-- ***********************************************************
-- hm2Diagnostic groups
-- ***********************************************************
--
hm2DiagSelftestGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 1 }
hm2DiagBootGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 2 }
hm2DiagDeviceMonitorGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 3 }
hm2DiagLedGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 4 }
hm2DiagIfaceUtilizationGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 5 }
hm2DiagCableTesterGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 6 }
hm2PortMonitorGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 7 }
hm2DiagResourcesGroup OBJECT IDENTIFIER ::= { hm2DiagnosticMibObjects 8 }
--
-- ***********************************************************
-- hm2DiagSelftestGroup
-- ***********************************************************
--
hm2DiagSelftestRAM OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls RAM self-test on cold start of the device.
When disabled the device booting time is reduced."
DEFVAL { enable }
::= { hm2DiagSelftestGroup 1 }
hm2DiagSelftestBootTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal boot time in Milliseconds until activating ports."
::= { hm2DiagSelftestGroup 2 }
hm2DiagSelftestActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DiagSelftestActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Diag self test action group."
::= { hm2DiagSelftestGroup 10 }
hm2DiagSelftestActionEntry OBJECT-TYPE
SYNTAX Hm2DiagSelftestActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Diag self test action entry."
INDEX { hm2DiagSelftestActionCause }
::= { hm2DiagSelftestActionTable 1 }
Hm2DiagSelftestActionEntry::= SEQUENCE {
hm2DiagSelftestActionCause INTEGER,
hm2DiagSelftestAction INTEGER
}
hm2DiagSelftestActionCause OBJECT-TYPE
SYNTAX INTEGER{
task(1),
resource(2),
software(3),
hardware(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area of the cause for the action the self-test
wants to take."
::= { hm2DiagSelftestActionEntry 1 }
hm2DiagSelftestAction OBJECT-TYPE
SYNTAX INTEGER{
logOnly(1),
sendTrap(2),
reboot(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action that the self-test component should take.
The cause is always logged to the system log,
additionally a trap can be sent to the management
station or a reboot can be performed."
DEFVAL { reboot }
::= { hm2DiagSelftestActionEntry 2 }
--
-- ***********************************************************
-- hm2DiagBootGroup
-- ***********************************************************
--
hm2BootSystemMonitor OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable the System Monitor access during
the boot phase. Please note: If the System Monitor
is disabled, it is possible to lose access to the
device permanently in case of loosing administrator
password or misconfiguration."
DEFVAL { enable }
::= { hm2DiagBootGroup 1 }
hm2BootDefaultConfigOnError OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable loading of the default configuration
in case there is any error loading the configuration during
the boot phase. If disabled the system will be halted."
DEFVAL { enable }
::= { hm2DiagBootGroup 2 }
hm2BootConfigPushButton OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable the push button functionality on the device."
DEFVAL { enable }
::= { hm2DiagBootGroup 3 }
--
-- ***********************************************************
-- hm2SignalContactGroup
-- ***********************************************************
--
hm2SignalContactGroup OBJECT IDENTIFIER ::= { hm2DiagDeviceMonitorGroup 1 }
-- *************************************************************
-- Signal Contact Common Table
-- *************************************************************
hm2SigConCommonTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SigConCommonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to configure the behavior
of the signalling contacts."
::= { hm2SignalContactGroup 1 }
hm2SigConCommonEntry OBJECT-TYPE
SYNTAX Hm2SigConCommonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2SigConConfigTable."
INDEX { hm2SigConID }
::= { hm2SigConCommonTable 1 }
Hm2SigConCommonEntry ::= SEQUENCE {
hm2SigConID Integer32,
hm2SigConTrapEnable HmEnabledStatus,
hm2SigConTrapCause INTEGER,
hm2SigConTrapCauseIndex Integer32,
hm2SigConMode INTEGER,
hm2SigConOperState INTEGER,
hm2SigConOperTimeStamp HmTimeSeconds1970,
hm2SigConManualActivate INTEGER,
hm2SigConSenseLinkFailure HmEnabledStatus,
hm2SigConSenseTemperature HmEnabledStatus,
hm2SigConSenseFan HmEnabledStatus,
hm2SigConSenseModuleRemoval HmEnabledStatus,
hm2SigConSenseExtNvmRemoval HmEnabledStatus,
hm2SigConSenseExtNvmNotInSync HmEnabledStatus,
hm2SigConSenseRingRedundancy HmEnabledStatus,
hm2SigConSenseEthernetLoops HmEnabledStatus,
hm2SigConSenseHumidity HmEnabledStatus,
hm2SigConSenseStpPortBlock HmEnabledStatus
}
hm2SigConID OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is used to identify the associated signalling contact."
::= { hm2SigConCommonEntry 1 }
hm2SigConTrapEnable OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether a trap shall be sent or not, when
the signal contact operating state changes."
DEFVAL { disable }
::= { hm2SigConCommonEntry 2 }
hm2SigConTrapCause OBJECT-TYPE
SYNTAX INTEGER {
none(1),
power-supply(2),
link-failure(3),
temperature(4),
fan-failure(5),
module-removal(6),
ext-nvm-removal(7),
ext-nvm-not-in-sync(8),
ring-redundancy(9),
password-change(10),
password-min-length(11),
password-policy-not-configured(12),
password-policy-inactive(13),
telnet-enabled(14),
http-enabled(15),
snmp-unsecure(16),
sysmon-enabled(17),
ext-nvm-update-enabled(18),
no-link(19),
hidisc-enabled(20),
ext-nvm-config-load-unsecure(21),
https-certificate-warning(23),
modbus-tcp-enabled(24),
ethernet-ip-enabled(25),
profinet-io-enabled(26),
ethernet-loops(27),
humidity(28),
pml-disabled(29),
stp-port-blocked(30)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hm2SigConTrapCauseIndex."
::= { hm2SigConCommonEntry 3 }
hm2SigConTrapCauseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the entity which produces the trap.
power-supply: index of power-supply table
link-failure: index of interface table
temperature: 0
ext-nvm-removal: (1) sd, (2) usb, (3) serial (not supported yet)
ext-nvm-not-in-sync: (1) sd, (2) usb, (3) serial (not supported yet)
ring-redundancy: (1) MRP, (2) PRP, (3) HSR, (4) DLR
ext-nvm-update-enabled: (1) sd, (2) usb, (3) serial (not supported yet)
no-link: index of interface table
ethernet-loops: index of interface table
humidity: 0
stp-port-blocked: index of interface table
0: other errors"
::= { hm2SigConCommonEntry 4 }
hm2SigConMode OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
monitor(2),
deviceState(3),
deviceSecurity(4),
deviceStateAndSecurity(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies the behavior of the relay contact.
The factory settings for signal contact 1 is monitoring the
correct operation of entries specified to be survived.
When the device has also a second signal contact, the factory
setting for it is the manual mode."
::= { hm2SigConCommonEntry 5 }
hm2SigConOperState OBJECT-TYPE
SYNTAX INTEGER {
open(1),
close(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the current operating state of the
signal contact."
::= { hm2SigConCommonEntry 6 }
hm2SigConOperTimeStamp OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows local system time (hm2SystemLocalTime) of the last hm2SigConOperState change."
::= { hm2SigConCommonEntry 7 }
hm2SigConManualActivate OBJECT-TYPE
SYNTAX INTEGER {
open(1),
close(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in manual mode, the signal contact state can
be set by this attribute."
::= { hm2SigConCommonEntry 8 }
hm2SigConSenseLinkFailure OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the network connection(s)."
DEFVAL { disable }
::= { hm2SigConCommonEntry 9 }
hm2SigConSenseTemperature OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the device temperature."
DEFVAL { enable }
::= { hm2SigConCommonEntry 10 }
hm2SigConSenseFan OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the device fan modules."
DEFVAL { enable }
::= { hm2SigConCommonEntry 11 }
hm2SigConSenseModuleRemoval OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of module removal (platform dependant)."
DEFVAL { disable }
::= { hm2SigConCommonEntry 12 }
hm2SigConSenseExtNvmRemoval OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the external non-volatile memory removal."
DEFVAL { disable }
::= { hm2SigConCommonEntry 13 }
hm2SigConSenseExtNvmNotInSync OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring whether the external non-volatile memory is in
sync with the configuration in NVRAM."
DEFVAL { disable }
::= { hm2SigConCommonEntry 14 }
hm2SigConSenseRingRedundancy OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the ring redundancy."
DEFVAL { disable }
::= { hm2SigConCommonEntry 15 }
hm2SigConSenseEthernetLoops OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring for Ethernet loops."
DEFVAL { disable }
::= { hm2SigConCommonEntry 16 }
hm2SigConSenseHumidity OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the device humidity."
DEFVAL { enable }
::= { hm2SigConCommonEntry 17 }
hm2SigConSenseStpPortBlock OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring for STP loops."
DEFVAL { enable }
::= { hm2SigConCommonEntry 18 }
-- *************************************************************
-- Signal Contact Power Supply Table
-- *************************************************************
hm2SigConPSTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SigConPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of all power supply states."
::= { hm2SignalContactGroup 2 }
hm2SigConPSEntry OBJECT-TYPE
SYNTAX Hm2SigConPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2SigConPSTable."
INDEX { hm2SigConID, hm2PSID }
::= { hm2SigConPSTable 1 }
Hm2SigConPSEntry ::= SEQUENCE {
hm2SigConSensePSState HmEnabledStatus
}
hm2SigConSensePSState OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the power supply state."
DEFVAL { enable }
::= { hm2SigConPSEntry 1 }
-- *************************************************************
-- Signal Contact Interface Table
-- *************************************************************
hm2SigConInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SigConInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to mask an alarm for the
signalling relay, produced by a link. The index for a link
corresponds with ifIndex. The table is also used
for the device monitoring configuration."
::= { hm2SignalContactGroup 3 }
hm2SigConInterfaceEntry OBJECT-TYPE
SYNTAX Hm2SigConInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2SigConLinkTable."
INDEX { hm2SigConID, ifIndex }
::= { hm2SigConInterfaceTable 1 }
Hm2SigConInterfaceEntry ::= SEQUENCE {
hm2SigConSenseIfLinkAlarm HmEnabledStatus
}
hm2SigConSenseIfLinkAlarm OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether an alarm for the signalling relay of the
associated link will be produced or not, so you can mask the
value of ifMauMediaAvailable."
DEFVAL { disable }
::= { hm2SigConInterfaceEntry 1 }
-- *************************************************************
-- Signal Contact Module Table
-- *************************************************************
hm2SigConModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SigConModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to mask a module for the
signaling relay. The index for a module corresponds with the
slot number."
::= { hm2SignalContactGroup 4 }
hm2SigConModuleEntry OBJECT-TYPE
SYNTAX Hm2SigConModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2SigConModuleTable."
INDEX { hm2SigConID, hm2SigConModID }
::= { hm2SigConModuleTable 1 }
Hm2SigConModuleEntry ::= SEQUENCE {
hm2SigConModID Integer32,
hm2SigConSenseModule HmEnabledStatus
}
hm2SigConModID OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is used to identify the associated module."
::= { hm2SigConModuleEntry 1 }
hm2SigConSenseModule OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether an alarm for the signalling relay of the
associated module will be produced or not."
DEFVAL { disable }
::= { hm2SigConModuleEntry 2 }
-- *************************************************************
-- Signal Contact Fan Module Table
-- *************************************************************
hm2SigConFanModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SigConFanModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to mask a fan module for the
signaling relay. The index for a module corresponds with the
module number."
::= { hm2SignalContactGroup 5 }
hm2SigConFanModuleEntry OBJECT-TYPE
SYNTAX Hm2SigConFanModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2SigConFanModuleTable."
INDEX { hm2SigConID, hm2SigConFanModID }
::= { hm2SigConFanModuleTable 1 }
Hm2SigConFanModuleEntry ::= SEQUENCE {
hm2SigConFanModID Integer32,
hm2SigConSenseFanModule HmEnabledStatus
}
hm2SigConFanModID OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is used to identify the associated fan module."
::= { hm2SigConFanModuleEntry 1 }
hm2SigConSenseFanModule OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether an alarm for the signalling relay of the
associated fan module will be produced or not."
DEFVAL { enable }
::= { hm2SigConFanModuleEntry 2 }
-- *************************************************************
-- Signal Contact Status Table
-- *************************************************************
hm2SigConStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2SigConStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the current monitored entities
for which there is a trap cause (hm2SigConTrapCause) active."
::= { hm2SignalContactGroup 10 }
hm2SigConStatusEntry OBJECT-TYPE
SYNTAX Hm2SigConStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2SigConStatusTable."
INDEX { hm2SigConID, hm2SigConStatusIndex }
::= { hm2SigConStatusTable 1 }
Hm2SigConStatusEntry ::= SEQUENCE {
hm2SigConStatusIndex Integer32,
hm2SigConStatusTimeStamp HmTimeSeconds1970,
hm2SigConStatusTrapCause INTEGER,
hm2SigConStatusTrapCauseIndex Integer32
}
hm2SigConStatusIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is used to identify the occured event."
::= { hm2SigConStatusEntry 1 }
hm2SigConStatusTimeStamp OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the local system time (hm2SystemLocalTime) of occuration the event."
::= { hm2SigConStatusEntry 2 }
hm2SigConStatusTrapCause OBJECT-TYPE
SYNTAX INTEGER {
none(1),
power-supply(2),
link-failure(3),
temperature(4),
fan-failure(5),
module-removal(6),
ext-nvm-removal(7),
ext-nvm-not-in-sync(8),
ring-redundancy(9),
password-change(10),
password-min-length(11),
password-policy-not-configured(12),
password-policy-inactive(13),
telnet-enabled(14),
http-enabled(15),
snmp-unsecure(16),
sysmon-enabled(17),
ext-nvm-update-enabled(18),
no-link(19),
hidisc-enabled(20),
ext-nvm-config-load-unsecure(21),
iec61850-mms-enabled(22),
https-certificate-warning(23),
modbus-tcp-enabled(24),
ethernet-ip-enabled(25),
profinet-io-enabled(26),
ethernet-loops(27),
humidity(28),
stp-port-blocked(30)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hm2SigConTrapCauseIndex."
::= { hm2SigConStatusEntry 3 }
hm2SigConStatusTrapCauseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the entity which produces the trap.
power-supply: index of power-supply table
link-failure: index of interface table
temperature: 0
ext-nvm-removal: (1) sd, (2) usb, (3) serial (not supported yet)
ext-nvm-not-in-sync: (1) sd, (2) usb, (3) serial (not supported yet)
ring-redundancy: (1) MRP, (2) PRP, (3) HSR, (4) DLR
ext-nvm-update-enabled: (1) sd, (2) usb, (3) serial (not supported yet)
no-link: index of interface table
ethernet-loops: index of interface table
humidity: 0
stp-port-blocked: index of interface table
0: other errors"
::= { hm2SigConStatusEntry 4 }
-- ### part 2
--
-- ***********************************************************
-- hm2DeviceMonitorGroup
-- ***********************************************************
--
hm2DeviceMonitorGroup OBJECT IDENTIFIER ::= { hm2DiagDeviceMonitorGroup 2 }
-- *************************************************************
-- hm2DeviceMonitorConfigGroup
-- *************************************************************
hm2DevMonCommonTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevMonCommonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to configure the behavior
of the signalling contacts."
::= { hm2DeviceMonitorGroup 1 }
hm2DevMonCommonEntry OBJECT-TYPE
SYNTAX Hm2DevMonCommonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevMonConfigTable."
INDEX { hm2DevMonID }
::= { hm2DevMonCommonTable 1 }
Hm2DevMonCommonEntry ::= SEQUENCE {
hm2DevMonID Integer32,
hm2DevMonTrapEnable HmEnabledStatus,
hm2DevMonTrapCause INTEGER,
hm2DevMonTrapCauseIndex Integer32,
hm2DevMonOperState INTEGER,
hm2DevMonOperTimeStamp HmTimeSeconds1970,
hm2DevMonSenseLinkFailure HmEnabledStatus,
hm2DevMonSenseTemperature HmEnabledStatus,
hm2DevMonSenseFan HmEnabledStatus,
hm2DevMonSenseModuleRemoval HmEnabledStatus,
hm2DevMonSenseExtNvmRemoval HmEnabledStatus,
hm2DevMonSenseExtNvmNotInSync HmEnabledStatus,
hm2DevMonSenseRingRedundancy HmEnabledStatus,
hm2DevMonSenseHumidity HmEnabledStatus,
hm2DevMonSenseStpPortBlock HmEnabledStatus
}
hm2DevMonID OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is used to identify the associated device monitoring group.
Currently only one group is supported"
::= { hm2DevMonCommonEntry 1 }
hm2DevMonTrapEnable OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether a trap shall be sent or not when
the signal contact operating state changes."
DEFVAL { enable }
::= { hm2DevMonCommonEntry 2 }
hm2DevMonTrapCause OBJECT-TYPE
SYNTAX INTEGER {
none(1),
power-supply(2),
link-failure(3),
temperature(4),
fan-failure(5),
module-removal(6),
ext-nvm-removal(7),
ext-nvm-not-in-sync(8),
ring-redundancy(9),
humidity(28),
stp-port-blocked(30)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hm2DevMonTrapCauseIndex."
::= { hm2DevMonCommonEntry 3 }
hm2DevMonTrapCauseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the entity which produces the trap.
power-supply: index of power supply table
link-failure: index of interface table
temperature: 0
ext-nvm-removal: (1) sd, (2) usb, (3) Serial (not supported yet)
ext-nvm-not-in-sync: (1) sd, (2) usb, (3) Serial (not supported yet)
ring-redundancy: (1) MRP, (2) PRP, (3), HSR, (4) DLR
humidity: 0
stp-port-blocked: index of interface table
0: other errors"
::= { hm2DevMonCommonEntry 4 }
hm2DevMonOperState OBJECT-TYPE
SYNTAX INTEGER {
noerror(1),
error(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the current operating state of the
signal contact."
::= { hm2DevMonCommonEntry 5 }
hm2DevMonOperTimeStamp OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the local system time (hm2SystemLocalTime) of the last hm2DevMonOperState change."
::= { hm2DevMonCommonEntry 6 }
hm2DevMonSenseLinkFailure OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the network connection(s)."
DEFVAL { disable }
::= { hm2DevMonCommonEntry 7 }
hm2DevMonSenseTemperature OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the device temperature."
DEFVAL { enable }
::= { hm2DevMonCommonEntry 8 }
hm2DevMonSenseFan OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the device fan modules."
DEFVAL { enable }
::= { hm2DevMonCommonEntry 9 }
hm2DevMonSenseModuleRemoval OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of module removal (platform dependent)."
DEFVAL { disable }
::= { hm2DevMonCommonEntry 10 }
hm2DevMonSenseExtNvmRemoval OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the external non-volatile memory removal."
DEFVAL { disable }
::= { hm2DevMonCommonEntry 11 }
hm2DevMonSenseExtNvmNotInSync OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring whether the external non-volatile memory is in
sync with the configuration in NVRAM."
DEFVAL { disable }
::= { hm2DevMonCommonEntry 12 }
hm2DevMonSenseRingRedundancy OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the ring redundancy."
DEFVAL { disable }
::= { hm2DevMonCommonEntry 13 }
hm2DevMonSenseHumidity OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the device humidity."
DEFVAL { enable }
::= { hm2DevMonCommonEntry 14 }
hm2DevMonSenseStpPortBlock OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring whether a port was blocked by STP."
DEFVAL { enable }
::= { hm2DevMonCommonEntry 15 }
-- *************************************************************
-- Device Monitor Power Supply Table
-- *************************************************************
hm2DevMonPSTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevMonPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of all power supply states."
::= { hm2DeviceMonitorGroup 2 }
hm2DevMonPSEntry OBJECT-TYPE
SYNTAX Hm2DevMonPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevMonPSTable."
INDEX { hm2DevMonID, hm2PSID }
::= { hm2DevMonPSTable 1 }
Hm2DevMonPSEntry ::= SEQUENCE {
hm2DevMonSensePSState HmEnabledStatus
}
hm2DevMonSensePSState OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the monitoring of the power supply state."
DEFVAL { enable }
::= { hm2DevMonPSEntry 1 }
-- *************************************************************
-- Device Monitor Interface Table
-- *************************************************************
hm2DevMonInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevMonInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to mask an alarm for the
signalling relay, produced by a link. The index for a link
corresponds with ifIndex. The table is also used
for the device monitoring configuration."
::= { hm2DeviceMonitorGroup 3 }
hm2DevMonInterfaceEntry OBJECT-TYPE
SYNTAX Hm2DevMonInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevMonLinkTable."
INDEX { hm2DevMonID, ifIndex }
::= { hm2DevMonInterfaceTable 1 }
Hm2DevMonInterfaceEntry ::= SEQUENCE {
hm2DevMonSenseIfLinkAlarm HmEnabledStatus
}
hm2DevMonSenseIfLinkAlarm OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether an alarm for the signalling relay of the
associated link will be produced or not, so you can mask the
value of ifMauMediaAvailable."
DEFVAL { disable }
::= { hm2DevMonInterfaceEntry 1 }
-- *************************************************************
-- Device Monitor Module Table
-- *************************************************************
hm2DevMonModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevMonModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to mask a module for the
device status. The index for a module corresponds with the
slot number."
::= { hm2DeviceMonitorGroup 4 }
hm2DevMonModuleEntry OBJECT-TYPE
SYNTAX Hm2DevMonModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevMonModuleTable."
INDEX { hm2DevMonID, hm2DevMonModID }
::= { hm2DevMonModuleTable 1 }
Hm2DevMonModuleEntry ::= SEQUENCE {
hm2DevMonModID Integer32,
hm2DevMonSenseModule HmEnabledStatus
}
hm2DevMonModID OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is used to identify the associated module."
::= { hm2DevMonModuleEntry 1 }
hm2DevMonSenseModule OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether an alarm for the device status of the
associated module will be produced or not."
DEFVAL { disable }
::= { hm2DevMonModuleEntry 2 }
-- *************************************************************
-- Device Monitor Fan Module Table
-- *************************************************************
hm2DevMonFanModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevMonFanModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to mask a fan module for the
device status. The index for a module corresponds with the
module number."
::= { hm2DeviceMonitorGroup 5 }
hm2DevMonFanModuleEntry OBJECT-TYPE
SYNTAX Hm2DevMonFanModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevMonFanModuleTable."
INDEX { hm2DevMonID, hm2DevMonFanModID }
::= { hm2DevMonFanModuleTable 1 }
Hm2DevMonFanModuleEntry ::= SEQUENCE {
hm2DevMonFanModID Integer32,
hm2DevMonSenseFanModule HmEnabledStatus
}
hm2DevMonFanModID OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is used to identify the associated fan module."
::= { hm2DevMonFanModuleEntry 1 }
hm2DevMonSenseFanModule OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether an alarm for the device status of the
associated fan module will be produced or not."
DEFVAL { enable }
::= { hm2DevMonFanModuleEntry 2 }
-- *************************************************************
-- Device Monitor Status Table
-- *************************************************************
hm2DevMonStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevMonStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the current monitored entities in the hm2DeviceMonitorGroup
for which there is a trap cause (hm2DevMonStatusTrapCause) active."
::= { hm2DeviceMonitorGroup 10 }
hm2DevMonStatusEntry OBJECT-TYPE
SYNTAX Hm2DevMonStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevMonStatusTable."
INDEX { hm2DevMonID, hm2DevMonStatusIndex }
::= { hm2DevMonStatusTable 1 }
Hm2DevMonStatusEntry ::= SEQUENCE {
hm2DevMonStatusIndex Integer32,
hm2DevMonStatusTimeStamp HmTimeSeconds1970,
hm2DevMonStatusTrapCause INTEGER,
hm2DevMonStatusTrapCauseIndex Integer32
}
hm2DevMonStatusIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is used to identify the occured event."
::= { hm2DevMonStatusEntry 1 }
hm2DevMonStatusTimeStamp OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the local system time (hm2SystemLocalTime) of occuration the event."
::= { hm2DevMonStatusEntry 2 }
hm2DevMonStatusTrapCause OBJECT-TYPE
SYNTAX INTEGER {
none(1),
power-supply(2),
link-failure(3),
temperature(4),
fan-failure(5),
module-removal(6),
ext-nvm-removal(7),
ext-nvm-not-in-sync(8),
ring-redundancy(9),
humidity(28),
stp-port-blocked(30)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hm2DevMonTrapCauseIndex."
::= { hm2DevMonStatusEntry 3 }
hm2DevMonStatusTrapCauseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the entity which produces the trap.
power-supply: index of power supply table
link-failure: index of interface table
temperature: 0
ext-nvm-removal: (1) sd, (2) usb, (3) Serial (not supported yet)
ext-nvm-not-in-sync: (1) sd, (2) usb, (3) Serial (not supported yet)
ring-redundancy: (1) MRP, (2) PRP, (3) HSR, (4) DLR
humidity: 0
stp-port-blocked: index of interface table
0: other errors"
::= { hm2DevMonStatusEntry 4 }
-- ### part 3
--
-- ***********************************************************
-- hm2DeviceSecurityGroup
-- ***********************************************************
--
hm2DeviceSecurityGroup OBJECT IDENTIFIER ::= { hm2DiagDeviceMonitorGroup 3 }
-- *************************************************************
-- Device Security Config Group
-- *************************************************************
hm2DevSecConfigGroup OBJECT IDENTIFIER ::= { hm2DeviceSecurityGroup 1 }
hm2DevSecTrapEnable OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether a trap shall be sent or not, when
the device security operating state changes."
DEFVAL { disable }
::= { hm2DevSecConfigGroup 1 }
hm2DevSecTrapCause OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password-change(10),
password-min-length(11),
password-policy-not-configured(12),
password-policy-inactive(13),
telnet-enabled(14),
http-enabled(15),
snmp-unsecure(16),
sysmon-enabled(17),
ext-nvm-update-enabled(18),
no-link(19),
hidisc-enabled(20),
ext-nvm-config-load-unsecure(21),
iec61850-mms-enabled(22),
https-certificate-warning(23),
modbus-tcp-enabled(24),
ethernet-ip-enabled(25),
profinet-io-enabled(26),
pml-disabled(29)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hm2DevMonTrapCauseIndex."
::= { hm2DevSecConfigGroup 2 }
hm2DevSecTrapCauseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the entity which produces the trap.
ext-nvm-update-enabled: (1) sd, (2) usb, (3) serial (not supported yet)
no-link: index of interface table
0: other errors."
::= { hm2DevSecConfigGroup 3 }
hm2DevSecOperState OBJECT-TYPE
SYNTAX INTEGER {
noerror(1),
error(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the current operating state of the signal contact."
::= { hm2DevSecConfigGroup 4 }
hm2DevSecOperTimeStamp OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the local system time (hm2SystemLocalTime) of the last hm2DevSecOperState change."
::= { hm2DevSecConfigGroup 5 }
hm2DevSecSensePasswordChange OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if default passwords for 'user' and 'admin' are not changed."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 6 }
hm2DevSecSensePasswordMinLength OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if configured minimum password length is < 8 characters."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 7 }
hm2DevSecSensePasswordStrengthNotConfigured OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable minimum password strength to check if
(1 uppercase, 1 lowercase, 1 number, 1 non-alphanumeric) is not configured."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 8 }
hm2DevSecSenseBypassPasswordStrength OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if at least one user is configured to bypass strength check."
DEFVAL { disable }
::= { hm2DevSecConfigGroup 9 }
hm2DevSecSenseTelnetEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if telnet is enabled on the switch."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 10 }
hm2DevSecSenseHttpEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if HTTP is enabled on the switch."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 11 }
hm2DevSecSenseSnmpUnsecure OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if SNMP v1/v2 is enabled or v3 encryption is disabled."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 12 }
hm2DevSecSenseSysmonEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if sysmon1 access is not disabled."
DEFVAL { disable }
::= { hm2DevSecConfigGroup 13 }
hm2DevSecSenseExtNvmUpdateEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if external non-volatile memory update is not disabled."
DEFVAL { disable }
::= { hm2DevSecConfigGroup 14 }
hm2DevSecSenseNoLinkEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if at least one port has no link but admin state is up."
DEFVAL { disable }
::= { hm2DevSecConfigGroup 15 }
hm2DevSecSenseHiDiscoveryEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if HiDiscovery is enabled and the mode is 'read-write'."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 16 }
hm2DevSecSenseExtNvmConfigLoadUnsecure OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if the configuration load from external NVM is unsecure.
(The configuration priority of the external NVM is set
to 'first', 'second' or 'third' and the configuration encryption
is not active.)"
DEFVAL { enable }
::= { hm2DevSecConfigGroup 17 }
hm2DevSecSenseIec61850MmsEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if IEC 61850 MMS is enabled on the switch."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 18 }
hm2DevSecSenseHttpsCertificateWarning OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check for the presence of the auto generated self-signed HTTPS certificate."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 19 }
hm2DevSecSenseModbusTcpEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if Modbus/TCP server is enabled on the switch."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 20 }
hm2DevSecSenseEtherNetIpEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if EtherNet/IP protocol is enabled on the switch."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 21 }
hm2DevSecSenseProfinetIOEnabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if ProfinetIO protocol is enabled on the switch."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 22 }
hm2DevSecSensePMLDisabled OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable to check if Port MAC Locking is disabled on the switch."
DEFVAL { enable }
::= { hm2DevSecConfigGroup 23 }
-- *************************************************************
-- Device Security Interface Table
-- *************************************************************
hm2DevSecInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevSecInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all variables to mask an alarm for the
signalling relay, produced by a link. The index for a link
corresponds with ifIndex. The table is also used
for the device monitoring configuration."
::= { hm2DeviceSecurityGroup 2 }
hm2DevSecInterfaceEntry OBJECT-TYPE
SYNTAX Hm2DevSecInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevSecLinkTable."
INDEX { ifIndex }
::= { hm2DevSecInterfaceTable 1 }
Hm2DevSecInterfaceEntry ::= SEQUENCE {
hm2DevSecSenseIfNoLink HmEnabledStatus
}
hm2DevSecSenseIfNoLink OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port has no link but admin state is up"
DEFVAL { disable }
::= { hm2DevSecInterfaceEntry 1 }
-- *************************************************************
-- Device Security Status Group
-- *************************************************************
hm2DevSecStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DevSecStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the current monitored entities in the hm2DevSecConfigGroup
for which there is a trap cause (hm2DevSecStatusTrapCause) active."
::= { hm2DeviceSecurityGroup 10 }
hm2DevSecStatusEntry OBJECT-TYPE
SYNTAX Hm2DevSecStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the hm2DevSecStatusTable."
INDEX { hm2DevSecStatusIndex }
::= { hm2DevSecStatusTable 1 }
Hm2DevSecStatusEntry ::= SEQUENCE {
hm2DevSecStatusIndex Integer32,
hm2DevSecStatusTimeStamp HmTimeSeconds1970,
hm2DevSecStatusTrapCause INTEGER,
hm2DevSecStatusTrapCauseIndex Integer32
}
hm2DevSecStatusIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is used to identify the occured event."
::= { hm2DevSecStatusEntry 1 }
hm2DevSecStatusTimeStamp OBJECT-TYPE
SYNTAX HmTimeSeconds1970
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the local system time (hm2SystemLocalTime) of occuration the event."
::= { hm2DevSecStatusEntry 2 }
hm2DevSecStatusTrapCause OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password-change(10),
password-min-length(11),
password-policy-not-configured(12),
password-policy-inactive(13),
telnet-enabled(14),
http-enabled(15),
snmp-unsecure(16),
sysmon-enabled(17),
ext-nvm-update-enabled(18),
no-link(19),
hidisc-enabled(20),
ext-nvm-config-load-unsecure(21),
iec61850-mms-enabled(22),
https-certificate-warning(23),
modbus-tcp-enabled(24),
ethernet-ip-enabled(25),
profinet-io-enabled(26),
pml-disabled(29)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the cause for a trap.
The index of the entity which produces the trap
is specified by hm2DevSecTrapCauseIndex."
::= { hm2DevSecStatusEntry 3 }
hm2DevSecStatusTrapCauseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the entity which produces the trap.
ext-nvm-update-enabled: (1) sd, (2) usb, (3) serial (not supported yet)
no-link: index of interface table
0: other errors."
::= { hm2DevSecStatusEntry 4 }
--
-- *************************************************************
-- Led Group
-- *************************************************************
--
--
-- *************************************************************
-- hm2LedGlobalTable
-- *************************************************************
--
hm2LedGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2LedGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { hm2DiagLedGroup 1 }
hm2LedGlobalEntry OBJECT-TYPE
SYNTAX Hm2LedGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
INDEX { hm2LedGlobalLedType }
::= { hm2LedGlobalTable 1 }
Hm2LedGlobalEntry ::= SEQUENCE {
hm2LedGlobalLedType Hm2LedType,
hm2LedGlobalStatus Hm2LedStatus
}
hm2LedGlobalLedType OBJECT-TYPE
SYNTAX Hm2LedType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { hm2LedGlobalEntry 1 }
hm2LedGlobalStatus OBJECT-TYPE
SYNTAX Hm2LedStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { hm2LedGlobalEntry 2 }
--
-- *************************************************************
-- hm2LedPortTable
-- *************************************************************
--
hm2LedPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2LedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { hm2DiagLedGroup 2 }
hm2LedPortEntry OBJECT-TYPE
SYNTAX Hm2LedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
INDEX { hm2IfacePhysIndex }
::= { hm2LedPortTable 1 }
Hm2LedPortEntry ::= SEQUENCE {
hm2LedPortStatus Hm2LedStatus,
hm2LedPortPoeStatus Hm2LedStatus,
hm2LedPortSignaling HmEnabledStatus
}
hm2LedPortStatus OBJECT-TYPE
SYNTAX Hm2LedStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { hm2LedPortEntry 1 }
hm2LedPortPoeStatus OBJECT-TYPE
SYNTAX Hm2LedStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { hm2LedPortEntry 2 }
hm2LedPortSignaling OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable for LED port signaling."
DEFVAL { disable }
::= { hm2LedPortEntry 3 }
--
-- *************************************************************
-- hm2LedControlGroup
-- *************************************************************
--
hm2LedControlGroup OBJECT IDENTIFIER ::= { hm2DiagLedGroup 3 }
hm2LedPortMode OBJECT-TYPE
SYNTAX INTEGER {
portpanel (0),
servicepanel (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch LED signalling between the port LEDs on front side (port panel) and
the port LEDs on the back side (service panel) of the device."
DEFVAL { servicepanel }
::= { hm2LedControlGroup 1 }
-- *************************************************************
-- hm2DiagIfaceUtilizationTable
-- *************************************************************
hm2DiagIfaceUtilizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DiagIfaceUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains variables for each interface of
the switch."
::= { hm2DiagIfaceUtilizationGroup 1 }
hm2DiagIfaceUtilizationEntry OBJECT-TYPE
SYNTAX Hm2DiagIfaceUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the hm2DiagIfaceUtilizationTable."
INDEX { ifIndex }
::= { hm2DiagIfaceUtilizationTable 1 }
Hm2DiagIfaceUtilizationEntry ::= SEQUENCE {
hm2DiagIfaceUtilization Integer32,
hm2DiagIfaceUtilizationControlInterval Integer32,
hm2DiagIfaceUtilizationAlarmLowerThreshold Integer32,
hm2DiagIfaceUtilizationAlarmUpperThreshold Integer32,
hm2DiagIfaceUtilizationAlarmCondition TruthValue
}
hm2DiagIfaceUtilization OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the mean physical layer
network utilization on this interface during the
last sampling interval, in hundredth of one percent.
The first historyControlInterval (rfc1757) of this
interface is used as sampling interval."
DEFVAL { 0 }
::= { hm2DiagIfaceUtilizationEntry 1 }
hm2DiagIfaceUtilizationControlInterval OBJECT-TYPE
SYNTAX Integer32 (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled for hm2DiagIfaceUtilization.
This interval can be any number of seconds
between 1 and 3600 (1 hour).
The first historyControlInterval (rfc1757) of this
interface is used as sampling interval."
DEFVAL { 30 }
::= { hm2DiagIfaceUtilizationEntry 2 }
hm2DiagIfaceUtilizationAlarmLowerThreshold OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Surveys the interface utilization hm2DiagIfaceUtilization and
generates an alarm for this interfaces, if
the utilization value is below the given limit.
A value of 0 disables the alarm generation."
DEFVAL { 0 }
::= { hm2DiagIfaceUtilizationEntry 3 }
hm2DiagIfaceUtilizationAlarmUpperThreshold OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Surveys the interface utilization hm2DiagIfaceUtilization and
generates an alarm for this interfaces, if the given
limit is exceeded.
A value of 0 disables the alarm generation."
DEFVAL { 0 }
::= { hm2DiagIfaceUtilizationEntry 4 }
hm2DiagIfaceUtilizationAlarmCondition OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm condition is given (true), if the given
hm2DiagIfaceUtilizationAlarmUpperThreshold limit is exceeded
by the interface utilization or if the utilization value falls below
hm2DiagIfaceUtilizationAlarmLowerThreshold limit.
The alarm condition will be removed, when the interface utilization
value falls in between hm2DiagIfaceUtilizationAlarmLowerThreshold
hm2DiagIfaceUtilizationAlarmUpperThreshold."
::= { hm2DiagIfaceUtilizationEntry 5 }
-- *************************************************************
-- hm2DiagEgressIfaceUtilizationTable
-- *************************************************************
hm2DiagEgressIfaceUtilizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DiagEgressIfaceUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains egress variables for each interface of
the switch."
::= { hm2DiagIfaceUtilizationGroup 2 }
hm2DiagEgressIfaceUtilizationEntry OBJECT-TYPE
SYNTAX Hm2DiagEgressIfaceUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the hm2DiagEgressIfaceUtilizationTable."
INDEX { ifIndex }
::= { hm2DiagEgressIfaceUtilizationTable 1 }
Hm2DiagEgressIfaceUtilizationEntry ::= SEQUENCE {
hm2DiagEgressIfaceUtilization Integer32,
hm2DiagEgressIfaceUtilizationControlInterval Integer32,
hm2DiagEgressIfaceUtilizationAlarmLowerThreshold Integer32,
hm2DiagEgressIfaceUtilizationAlarmUpperThreshold Integer32,
hm2DiagEgressIfaceUtilizationAlarmCondition TruthValue
}
hm2DiagEgressIfaceUtilization OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best estimate of the mean physical layer
network egress utilization on this interface during the
last sampling interval, in hundredth of one percent.
The first historyControlInterval (rfc1757) of this
interface is used as sampling interval."
DEFVAL { 0 }
::= { hm2DiagEgressIfaceUtilizationEntry 1 }
hm2DiagEgressIfaceUtilizationControlInterval OBJECT-TYPE
SYNTAX Integer32 (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval in seconds over which the egress data is
sampled for hm2DiagEgressIfaceUtilization.
This interval can be any number of seconds
between 1 and 3600 (1 hour).
The first historyControlInterval (rfc1757) of this
interface is used as sampling interval."
DEFVAL { 30 }
::= { hm2DiagEgressIfaceUtilizationEntry 2 }
hm2DiagEgressIfaceUtilizationAlarmLowerThreshold OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Surveys the egress interface utilization hm2DiagEgressIfaceUtilization and
generates an alarm for this interface, if
the utilization value is below the given limit.
A value of 0 disables the alarm generation."
DEFVAL { 0 }
::= { hm2DiagEgressIfaceUtilizationEntry 3 }
hm2DiagEgressIfaceUtilizationAlarmUpperThreshold OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Surveys the egress interface utilization hm2DiagEgressIfaceUtilization and
generates an alarm for this interface, if the given
limit is exceeded.
A value of 0 disables the alarm generation."
DEFVAL { 0 }
::= { hm2DiagEgressIfaceUtilizationEntry 4 }
hm2DiagEgressIfaceUtilizationAlarmCondition OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm condition is given (true), if the given
hm2DiagEgressIfaceUtilizationAlarmUpperThreshold limit is exceeded
by the egress interface utilization or if the utilization value falls below
hm2DiagEgressIfaceUtilizationAlarmLowerThreshold limit.
The alarm condition will be removed, when the egress interface utilization
value falls in between hm2DiagEgressIfaceUtilizationAlarmLowerThreshold
hm2DiagEgressIfaceUtilizationAlarmUpperThreshold."
::= { hm2DiagEgressIfaceUtilizationEntry 5 }
--
-- *************************************************************
-- Cable Tester Group
-- *************************************************************
--
hm2DiagCableTesterStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
success(2),
failure(3),
uninitialized(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the Virtual Cable Tester
active(1) - Cable testing is in progress.
Set to this value to start the test.
success(2) - A successful test was performed.
Cannot be set.
failure(3) - A failure was encountered during the test.
Cannot be set.
uninitialized(4) - No test has been performed yet.
Cannot be set."
DEFVAL { uninitialized }
::= { hm2DiagCableTesterGroup 1 }
hm2DiagCableTesterIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines on which port to perform the cable test.
Limited to copper based ports."
DEFVAL { 0 }
::= { hm2DiagCableTesterGroup 2 }
hm2DiagCableTesterCableTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2DiagCableTesterCableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains variables for each pair of
the cable."
::= { hm2DiagCableTesterGroup 10 }
hm2DiagCableTesterCableEntry OBJECT-TYPE
SYNTAX Hm2DiagCableTesterCableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the hm2DiagCableTesterCableTable."
INDEX { hm2DiagCableTesterCablePair }
::= { hm2DiagCableTesterCableTable 1 }
Hm2DiagCableTesterCableEntry ::= SEQUENCE {
hm2DiagCableTesterCablePair Integer32,
hm2DiagCableTesterCableStatus INTEGER,
hm2DiagCableTesterCableMinimumLength Unsigned32,
hm2DiagCableTesterCableMaximumLength Unsigned32,
hm2DiagCableTesterCableFailureLocation Unsigned32
}
hm2DiagCableTesterCablePair OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the hm2DiagCableTesterCableTable.
If a PHY does not support the measurement per pair,
the first index is used to show the values."
::= { hm2DiagCableTesterCableEntry 1 }
hm2DiagCableTesterCableStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
open(2),
short(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the results of the Cable Test.
normal(1) - The cable is working correctly.
open(2) - The cable is disconnected or there is a faulty
connector.
short(3) - There is an electrical short in the cable.
unknown(4) - No test has been performed yet, or a test is
currently in progress."
DEFVAL { unknown }
::= { hm2DiagCableTesterCableEntry 2 }
hm2DiagCableTesterCableMinimumLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated length of the cable in meters. This value
indicates the shortest length estimated. This object will
return 0 if hm2DiagCableTesterStatus is not success(2) or the cable
length is unknown."
DEFVAL { 0 }
::= { hm2DiagCableTesterCableEntry 3 }
hm2DiagCableTesterCableMaximumLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated length of the cable in meters. This value
indicates the longest length estimated. This object will
return 0 if hm2DiagCableTesterStatus is not success(2) or the cable
length is unknown."
DEFVAL { 0 }
::= { hm2DiagCableTesterCableEntry 4 }
hm2DiagCableTesterCableFailureLocation OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated distance in meters from the end of the cable to
the failure location. This object will return 0 if
hm2DiagCableTesterStatus is not success(2)."
DEFVAL { 0 }
::= { hm2DiagCableTesterCableEntry 5 }
--
-- *************************************************************
-- hm2PortMonitorGroup
-- *************************************************************
--
--hm2PortMonitorGroup OBJECT IDENTIFIER ::= { hm2ConfigurationMibs 0 }
hm2PortMonitorAdminMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch to enable / disable the port state actions,
which are performed if a condition becomes true"
DEFVAL { false }
::= { hm2PortMonitorGroup 1 }
hm2PortMonitorIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2PortMonitorIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port state mode interface table."
::= { hm2PortMonitorGroup 2 }
hm2PortMonitorIntfEntry OBJECT-TYPE
SYNTAX Hm2PortMonitorIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port state mode interface entry."
INDEX { ifIndex }
::= { hm2PortMonitorIntfTable 1 }
Hm2PortMonitorIntfEntry ::=
SEQUENCE {
hm2PortMonitorIntfReset TruthValue,
hm2PortMonitorIntfAction INTEGER
}
hm2PortMonitorIntfReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port monitor interface reset."
DEFVAL { false }
::= { hm2PortMonitorIntfEntry 2 }
hm2PortMonitorIntfAction OBJECT-TYPE
SYNTAX INTEGER {
port-disable(1),
trap-only (2),
auto-disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface link disable state."
DEFVAL { auto-disable }
::= { hm2PortMonitorIntfEntry 3 }
hm2PortMonitorConditionGroup OBJECT IDENTIFIER ::= { hm2PortMonitorGroup 3 }
hm2KbpsUnitTrafficTypeInvalid OBJECT-IDENTITY
STATUS current
DESCRIPTION "Interface {0}: 'Kbps' unit can only be used for traffic type 'all'."
::= { hm2PortMonitorGroup 4}
hm2PortMonitorConditionIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2PortMonitorConditionIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port state condition interface table."
::= { hm2PortMonitorConditionGroup 1 }
hm2PortMonitorConditionIntfEntry OBJECT-TYPE
SYNTAX Hm2PortMonitorConditionIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port state action interface entry."
INDEX { ifIndex }
::= { hm2PortMonitorConditionIntfTable 1 }
Hm2PortMonitorConditionIntfEntry ::=
SEQUENCE {
hm2PortMonitorConditionField BITS,
hm2PortMonitorConditionLinkFlapMode TruthValue,
hm2PortMonitorConditionCrcFragmentsMode TruthValue,
hm2PortMonitorConditionDuplexMismatchDetectionMode TruthValue,
hm2PortMonitorConditionOverloadDetectionMode TruthValue,
hm2PortMonitorConditionSpeedDuplexMode TruthValue
}
hm2PortMonitorConditionField OBJECT-TYPE
SYNTAX BITS {
none(0),
link-flap(1),
crcFragments(2),
duplexMismatch(3),
overload-detection(4),
speed-duplex (5)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Condition type field."
::= { hm2PortMonitorConditionIntfEntry 1 }
hm2PortMonitorConditionLinkFlapMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface link flap mode."
DEFVAL { false }
::= { hm2PortMonitorConditionIntfEntry 2 }
hm2PortMonitorConditionCrcFragmentsMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface CrcFragments mode."
DEFVAL { false }
::= { hm2PortMonitorConditionIntfEntry 3 }
hm2PortMonitorConditionDuplexMismatchDetectionMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface duplex mismatch detection mode."
DEFVAL { false }
::= { hm2PortMonitorConditionIntfEntry 4 }
hm2PortMonitorConditionOverloadDetectionMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Overload Detection mode."
DEFVAL { false }
::= { hm2PortMonitorConditionIntfEntry 5 }
hm2PortMonitorConditionSpeedDuplexMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Speed and Duplex monitor mode."
DEFVAL { false }
::= { hm2PortMonitorConditionIntfEntry 6 }
hm2PortMonitorConditionLinkFlapGroup OBJECT IDENTIFIER ::= { hm2PortMonitorConditionGroup 2 }
hm2PortMonitorConditionLinkFlapIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2PortMonitorConditionLinkFlapIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition link flap interface table."
::= { hm2PortMonitorConditionLinkFlapGroup 1 }
hm2PortMonitorConditionLinkFlapIntfEntry OBJECT-TYPE
SYNTAX Hm2PortMonitorConditionLinkFlapIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition link flap interface entry."
INDEX { ifIndex }
::= { hm2PortMonitorConditionLinkFlapIntfTable 1 }
Hm2PortMonitorConditionLinkFlapIntfEntry ::=
SEQUENCE {
hm2PortMonitorConditionLinkFlapInterval Integer32,
hm2PortMonitorConditionLinkFlapCount Integer32,
hm2PortMonitorConditionLinkFlapCountInterval Integer32,
hm2PortMonitorConditionLinkFlapCountTotal Integer32
}
hm2PortMonitorConditionLinkFlapInterval OBJECT-TYPE
SYNTAX Integer32(1..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Measure interval in seconds (1-180s) for link flap detection."
DEFVAL { 10 }
::= { hm2PortMonitorConditionLinkFlapIntfEntry 1 }
hm2PortMonitorConditionLinkFlapCount OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Link flap counter (1-100)."
DEFVAL { 5 }
::= { hm2PortMonitorConditionLinkFlapIntfEntry 2 }
hm2PortMonitorConditionLinkFlapCountInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link flap count that occured in last interval."
::= { hm2PortMonitorConditionLinkFlapIntfEntry 3 }
hm2PortMonitorConditionLinkFlapCountTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total link flap count."
::= { hm2PortMonitorConditionLinkFlapIntfEntry 4 }
hm2PortMonitorConditionCrcFragmentsGroup OBJECT IDENTIFIER ::= { hm2PortMonitorConditionGroup 3 }
hm2PortMonitorConditionCrcFragmentsIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2PortMonitorConditionCrcFragmentsIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition CrcFragments interface table."
::= { hm2PortMonitorConditionCrcFragmentsGroup 1 }
hm2PortMonitorConditionCrcFragmentsIntfEntry OBJECT-TYPE
SYNTAX Hm2PortMonitorConditionCrcFragmentsIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition CrcFragments interface entry."
INDEX { ifIndex }
::= { hm2PortMonitorConditionCrcFragmentsIntfTable 1 }
Hm2PortMonitorConditionCrcFragmentsIntfEntry ::=
SEQUENCE {
hm2PortMonitorConditionCrcFragmentsInterval Integer32,
hm2PortMonitorConditionCrcFragmentsCount Integer32,
hm2PortMonitorConditionCrcFragmentsCountInterval Integer32,
hm2PortMonitorConditionCrcFragmentsCountTotal Integer32
}
hm2PortMonitorConditionCrcFragmentsInterval OBJECT-TYPE
SYNTAX Integer32(5..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Measure interval in seconds (5-180s) for CrcFragments detection."
DEFVAL { 10 }
::= { hm2PortMonitorConditionCrcFragmentsIntfEntry 1 }
hm2PortMonitorConditionCrcFragmentsCount OBJECT-TYPE
SYNTAX Integer32(1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CrcFragments counter (1-1000000)."
DEFVAL { 1000 }
::= { hm2PortMonitorConditionCrcFragmentsIntfEntry 2 }
hm2PortMonitorConditionCrcFragmentsCountInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CrcFragments count that occured in last interval."
::= { hm2PortMonitorConditionCrcFragmentsIntfEntry 3 }
hm2PortMonitorConditionCrcFragmentsCountTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total CrcFragments count."
::= { hm2PortMonitorConditionCrcFragmentsIntfEntry 4 }
hm2PortMonitorConditionOverloadDetectionGroup OBJECT IDENTIFIER ::= { hm2PortMonitorConditionGroup 4 }
hm2PortMonitorConditionOvldDetIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2PortMonitorConditionOvldDetIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition overload detection interface table."
::= { hm2PortMonitorConditionOverloadDetectionGroup 1 }
hm2PortMonitorConditionOvldDetIntfEntry OBJECT-TYPE
SYNTAX Hm2PortMonitorConditionOvldDetIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition overload detection interface entry."
INDEX { ifIndex }
::= { hm2PortMonitorConditionOvldDetIntfTable 1 }
Hm2PortMonitorConditionOvldDetIntfEntry ::= SEQUENCE
{
hm2PortMonitorConditionOvldDetTrfcType INTEGER,
hm2PortMonitorConditionOvldDetTholdType INTEGER,
hm2PortMonitorConditionOvldDetLwrTholdVal Integer32,
hm2PortMonitorConditionOvldDetUprTholdVal Integer32,
hm2PortMonitorConditionOvldDetIntvl Integer32,
hm2PortMonitorConditionOvldDetPkgCntAll Integer32,
hm2PortMonitorConditionOvldDetPkgCntBC Integer32,
hm2PortMonitorConditionOvldDetPkgCntMC Integer32,
hm2PortMonitorConditionOvldDetPkgCntKbit Integer32
}
hm2PortMonitorConditionOvldDetTrfcType OBJECT-TYPE
SYNTAX INTEGER{
all (1),
bc (2),
bc-mc (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Overload detection condition traffic type."
DEFVAL { bc }
::= { hm2PortMonitorConditionOvldDetIntfEntry 1 }
hm2PortMonitorConditionOvldDetTholdType OBJECT-TYPE
SYNTAX INTEGER{
pps(1),
kbps(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Overload detection conditon threshold type."
DEFVAL { pps }
::= { hm2PortMonitorConditionOvldDetIntfEntry 2 }
hm2PortMonitorConditionOvldDetLwrTholdVal OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Overload detection condition lower threshold value."
DEFVAL { 0 }
::= { hm2PortMonitorConditionOvldDetIntfEntry 3 }
hm2PortMonitorConditionOvldDetUprTholdVal OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Overload detection condition upper threshold value."
DEFVAL { 0 }
::= { hm2PortMonitorConditionOvldDetIntfEntry 4 }
hm2PortMonitorConditionOvldDetIntvl OBJECT-TYPE
SYNTAX Integer32(1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Measure interval in seconds (1-20s) for overload detection."
DEFVAL { 1 }
::= { hm2PortMonitorConditionOvldDetIntfEntry 5 }
hm2PortMonitorConditionOvldDetPkgCntAll OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"All package count from last interval."
DEFVAL { 0 }
::= { hm2PortMonitorConditionOvldDetIntfEntry 6}
hm2PortMonitorConditionOvldDetPkgCntBC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcast package count from last interval."
DEFVAL { 0 }
::= { hm2PortMonitorConditionOvldDetIntfEntry 7}
hm2PortMonitorConditionOvldDetPkgCntMC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overload detection condition lower threshold value."
DEFVAL { 0 }
::= { hm2PortMonitorConditionOvldDetIntfEntry 8}
hm2PortMonitorConditionOvldDetPkgCntKbit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overload detection condition lower threshold value."
DEFVAL { 0 }
::= { hm2PortMonitorConditionOvldDetIntfEntry 9}
hm2PortMonitorConditionSpeedDuplexGroup OBJECT IDENTIFIER ::= { hm2PortMonitorConditionGroup 5 }
hm2PortMonitorConditionSpeedDuplexTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2PortMonitorConditionSpeedDuplexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition speed-duplex interface table."
::= { hm2PortMonitorConditionSpeedDuplexGroup 1 }
hm2PortMonitorConditionSpeedDuplexEntry OBJECT-TYPE
SYNTAX Hm2PortMonitorConditionSpeedDuplexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port condition speed-duplex interface entry."
INDEX { ifIndex }
::= { hm2PortMonitorConditionSpeedDuplexTable 1 }
Hm2PortMonitorConditionSpeedDuplexEntry ::= SEQUENCE {
hm2PortMonitorConditionSpeedDuplexValue BITS
}
hm2PortMonitorConditionSpeedDuplexValue OBJECT-TYPE
SYNTAX BITS {
hdx-10(0),
fdx-10(1),
hdx-100(2),
fdx-100(3),
hdx-1000(4),
fdx-1000(5),
fdx-2500(6),
fdx-10000(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speed and duplex combination allowed by port-monitor."
DEFVAL {{ hdx-10, fdx-10, hdx-100, fdx-100, hdx-1000, fdx-1000, fdx-2500, fdx-10000 }}
::= { hm2PortMonitorConditionSpeedDuplexEntry 1}
-- **************************************************************************
-- * *
-- * System Resources including CPU, memory, network *
-- * *
-- **************************************************************************
hm2DiagEnableMeasurement OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the resources measurement If disabled, the
task - needed for measurement - is also deleted."
DEFVAL { enable }
::= { hm2DiagResourcesGroup 1 }
--
-- ***********************************************************
--
-- C P U R E S O U R C E S
--
-- ***********************************************************
--
hm2DiagCpuResourcesGroup OBJECT IDENTIFIER ::= { hm2DiagResourcesGroup 10 }
hm2DiagCpuUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current cpu utilization of the device in percent."
::= { hm2DiagCpuResourcesGroup 1 }
hm2DiagCpuAverageUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average cpu utilization of the device in percent,
max. measured over the last 30 minutes."
::= { hm2DiagCpuResourcesGroup 2 }
hm2DiagCpuRunningProcesses OBJECT-TYPE
SYNTAX Integer32 (0..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of processes running."
::= { hm2DiagCpuResourcesGroup 3 }
hm2DiagCpuMaxRunningProcesses OBJECT-TYPE
SYNTAX Integer32 (0..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of processes running, max. since
the last 30 minutes."
::= { hm2DiagCpuResourcesGroup 4 }
--
-- ***********************************************************
--
-- M E M O R Y R E S O U R C E S
--
-- ***********************************************************
--
hm2DiagMemoryResourcesGroup OBJECT IDENTIFIER ::= { hm2DiagResourcesGroup 11 }
hm2DiagMemoryRamAllocated OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current allocated RAM of the device in kBytes."
::= { hm2DiagMemoryResourcesGroup 1 }
hm2DiagMemoryRamFree OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current free RAM of the device in kBytes."
::= { hm2DiagMemoryResourcesGroup 2 }
hm2DiagMemoryRamAllocatedAverage OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average allocated RAM of the device in kBytes,
measured over the last 30 minutes."
::= { hm2DiagMemoryResourcesGroup 3 }
hm2DiagMemoryRamFreeAverage OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average free RAM of the device in kBytes,
measured over the last 30 minutes."
::= { hm2DiagMemoryResourcesGroup 4 }
hm2DiagMemoryRawFlashMainAllocated OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current allocated flash memory for the main
software image in kBytes."
::= { hm2DiagMemoryResourcesGroup 10 }
hm2DiagMemoryRawFlashMainFree OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current free flash memory for the main
software image in kBytes."
::= { hm2DiagMemoryResourcesGroup 11 }
hm2DiagMemoryFlashFileSystemAllocated OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current allocated memory within the flash
file system in kBytes."
::= { hm2DiagMemoryResourcesGroup 12 }
hm2DiagMemoryFlashFileSystemFree OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "kBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current free memory within the flash
file system in kBytes."
::= { hm2DiagMemoryResourcesGroup 13 }
--
-- ***********************************************************
--
-- N E T W O R K R E S O U R C E S
--
-- ***********************************************************
--
hm2DiagNetworkResourcesGroup OBJECT IDENTIFIER ::= { hm2DiagResourcesGroup 12 }
hm2DiagNetworkCpuIfUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "precent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current network utilization of the internal cpu interface in percent."
::= { hm2DiagNetworkResourcesGroup 1 }
hm2DiagNetworkCpuIfAverageUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "precent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average network utilization of the internal cpu interface in percent,
measured over the last 30 minutes."
::= { hm2DiagNetworkResourcesGroup 2 }
--
-- ***********************************************************
-- hm2DiagnosticMibNotifications
-- ***********************************************************
--
hm2SigConStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
hm2SigConID,
hm2SigConOperState,
hm2SigConTrapCause,
hm2SigConTrapCauseIndex
}
STATUS current
DESCRIPTION
"This trap is sent if the value of hm2SigConState changes its value."
::= { hm2DiagnosticMibNotifications 1 }
hm2DevMonStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
hm2DevMonID,
hm2DevMonOperState,
hm2DevMonTrapCause,
hm2DevMonTrapCauseIndex
}
STATUS current
DESCRIPTION
"This trap is sent if the value of hm2DevMonState changes its value."
::= { hm2DiagnosticMibNotifications 2 }
hm2DevSecStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
hm2DevSecOperState,
hm2DevSecTrapCause,
hm2DevSecTrapCauseIndex
}
STATUS current
DESCRIPTION
"This trap is sent if the value of hm2DevSecState changes its value."
::= { hm2DiagnosticMibNotifications 3 }
hm2DiagSelftestActionTrap NOTIFICATION-TYPE
OBJECTS { hm2DiagSelftestActionCause }
STATUS current
DESCRIPTION
"This trap is sent if a self-test action is performed and
hm2DiagSelftestAction is configured to sendTrap(2)."
::= { hm2DiagnosticMibNotifications 4 }
-- *************************************************************
-- hm2DiagIfaceUtilization notifications
-- *************************************************************
hm2DiagIfaceUtilizationTrap NOTIFICATION-TYPE
OBJECTS {
hm2DiagIfaceUtilization,
hm2DiagIfaceUtilizationAlarmCondition
}
STATUS current
DESCRIPTION "This trap is sent if the value of hm2DiagIfaceUtilization
exceeds or falls back below the interface utilization thresholds
hm2DiagIfaceUtilizationAlarmConditionThreshold and
hm2DiagIfaceUtilizationAlarmRemovalThreshold."
::= { hm2DiagnosticMibNotifications 5 }
-- *************************************************************
-- hm2PortMonitorPortTrap
-- *************************************************************
hm2PortMonitorPortTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
hm2PortMonitorConditionField
}
STATUS current
DESCRIPTION
"This trap is sent if the a port has been disabled by port disable action by port monitor."
::= { hm2DiagnosticMibNotifications 6 }
-- *************************************************************
-- hm2DiagEgressIfaceUtilization notifications
-- *************************************************************
hm2DiagEgressIfaceUtilizationTrap NOTIFICATION-TYPE
OBJECTS {
hm2DiagEgressIfaceUtilization,
hm2DiagEgressIfaceUtilizationAlarmCondition
}
STATUS current
DESCRIPTION "This trap is sent if the value of hm2DiagEgressIfaceUtilizationAlarmCondition is true."
::= { hm2DiagnosticMibNotifications 7 }
--
-- ***********************************************************
-- hm2DiagnosticSNMPExtensionGroup
-- ***********************************************************
--
hm2PortMonitorSpeedDuplexErrorReturn OBJECT-IDENTITY
STATUS current
DESCRIPTION "Indicates that the specified speed value is not supported by the port capabilities"
::= { hm2DiagnosticSNMPExtensionGroup 1 }
hm2PortMonitorCndOvldDetInconsistenTholdVal OBJECT-IDENTITY
STATUS current
DESCRIPTION "Indicates that the configured upper and lower threshold values are inconsistent"
::= { hm2DiagnosticSNMPExtensionGroup 2 }
END
View Git Blame Copy Permalink