WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/hirschmann/HM2-CAM-MGMT-MIB

485 lines
14 KiB
Plaintext
Raw Permalink Blame History

HM2-CAM-MGMT-MIB DEFINITIONS ::= BEGIN
--
-- *************************************************************
-- Hirschmann CAM Management MIB
-- *************************************************************
--
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
OBJECT-IDENTITY,
Integer32 FROM SNMPv2-SMI -- RFC 2578
DisplayString,
RowStatus,
TruthValue FROM SNMPv2-TC
InetAddressType,
InetAddress,
InetPortNumber FROM INET-ADDRESS-MIB -- RFC4001
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
HmEnabledStatus,
hm2ConfigurationMibs FROM HM2-TC-MIB;
hm2CamMgmtMib MODULE-IDENTITY
LAST-UPDATED "201307010000Z" -- July 1, 2013
ORGANIZATION "Hirschmann Automation and Control GmbH"
CONTACT-INFO
"Postal: Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Phone: +49 7127 140
E-mail: hac.support@belden.com"
DESCRIPTION
"Hirschmann dummy for Central Authentication Management MIB for ABB.
Copyright (C) 2013. All Rights Reserved."
REVISION "201307010000Z" -- July 1, 2013
DESCRIPTION
"Initial version."
::= { hm2ConfigurationMibs 200 }
--
-- *************************************************************
-- hm2CamMgmtMib
-- *************************************************************
--
hm2CamMgmtMibNotifications OBJECT IDENTIFIER ::= { hm2CamMgmtMib 0 }
hm2CamMgmtMibObjects OBJECT IDENTIFIER ::= { hm2CamMgmtMib 1 }
-- hm2CamMgmtMibConformance OBJECT IDENTIFIER ::= { hm2CamMgmtMib 2 }
hm2CamMgmtMibSnmpExtensionGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMib 3 }
--
-- *************************************************************
-- hm2CamMgmtMib groups
-- *************************************************************
--
hm2CamConfigGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibObjects 1 }
hm2CamActionGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibObjects 10 }
hm2CamPwdChangeGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibObjects 20 }
hm2CamCertInfoGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibObjects 30 }
--
-- *************************************************************
-- hm2CamConfigGroup
-- *************************************************************
--
hm2CamConfigAdminStatus OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure authentication via CAM server.
If CAM authentication is enabled local users are deactivated.
Authentication will be done via CAM server (primary or backup) or
replicated user database on switch. Otherwise access to the switch
is not possible."
DEFVAL { disable }
::= { hm2CamConfigGroup 1 }
hm2CamConfigLastValidServerindex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last valid CAM server with succesful connection and authentication.
Note: this attribute is set by CAM management application."
::= { hm2CamConfigGroup 2 }
hm2CamClientServerAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2CamClientServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects to configure
CAM client connections."
::= { hm2CamConfigGroup 10 }
hm2CamClientServerAddrEntry OBJECT-TYPE
SYNTAX Hm2CamClientServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CAM client connection objects."
INDEX { hm2CamClientServerIndex }
::= { hm2CamClientServerAddrTable 1 }
Hm2CamClientServerAddrEntry ::= SEQUENCE {
hm2CamClientServerIndex Integer32,
hm2CamClientServerAddrType InetAddressType,
hm2CamClientServerAddr InetAddress,
hm2CamClientServerPort InetPortNumber,
hm2CamClientServerDescr SnmpAdminString,
hm2CamClientServerBaseDN SnmpAdminString,
hm2CamClientServerSearchString SnmpAdminString,
hm2CamClientServerStatus INTEGER,
hm2CamClientServerReplicationInterval Integer32,
hm2CamClientServerReplicationStatus INTEGER,
hm2CamClientServerRowStatus RowStatus,
hm2CamClientServerSslTls HmEnabledStatus
}
hm2CamClientServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Index for CAM server table."
::= { hm2CamClientServerAddrEntry 1 }
hm2CamClientServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Address type."
DEFVAL { ipv4 }
::= { hm2CamClientServerAddrEntry 2 }
hm2CamClientServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address of CAM authentication server."
DEFVAL { '00000000'H }
::= { hm2CamClientServerAddrEntry 3 }
hm2CamClientServerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of the CAM authentication server."
DEFVAL { 389 }
::= { hm2CamClientServerAddrEntry 4 }
hm2CamClientServerDescr OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..100))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of the server configured."
::= { hm2CamClientServerAddrEntry 5 }
hm2CamClientServerBaseDN OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..100))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Base distinguished name for LDAP query to CAM server."
::= { hm2CamClientServerAddrEntry 6 }
hm2CamClientServerSearchString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..100))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Search string for LDAP query to CAM server."
::= { hm2CamClientServerAddrEntry 7 }
hm2CamClientServerStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
unreachable(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of authentication against CAM server:
- ok -> CAM server reachable, authentication succeeded
- unreachable -> CAM server (primary and backup) not reachable
- other -> any other error state"
DEFVAL { other }
::= { hm2CamClientServerAddrEntry 8 }
hm2CamClientServerReplicationInterval OBJECT-TYPE
SYNTAX Integer32 (10..1440)
UNITS "minutes"
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"CAM replication was removed - function is no longer available."
DEFVAL { 60 }
::= { hm2CamClientServerAddrEntry 9 }
hm2CamClientServerReplicationStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
unsuccessful(2),
other(3)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"CAM replication was removed - function is no longer available."
DEFVAL { other }
::= { hm2CamClientServerAddrEntry 10 }
hm2CamClientServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of an entry in this table,
and is used to create/delete entries. Objects
within this table can by changed while the status
is 'active'."
::= { hm2CamClientServerAddrEntry 11 }
hm2CamClientServerSslTls OBJECT-TYPE
SYNTAX HmEnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates if CAM server uses SSL/TSL for
authentication. Disable means CAM server
authentication is done via StartTLS."
DEFVAL { disable }
::= { hm2CamClientServerAddrEntry 12 }
--
-- *************************************************************
-- hm2CamActionGroup
-- *************************************************************
--
hm2CamAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
testConnection(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Test available CAM server connections. Status of testing the CAM
server connections is shown in hm2CamActionConnectionStatus."
DEFVAL { other }
::= { hm2CamActionGroup 1 }
hm2CamActionConnectionStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
unreachable(2),
pending(3),
other(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of available CAM server connections.
- ok(1) -> at least one CAM server reachable.
- unreachable(2)-> no CAM server reachable.
- pending(3) -> testing connections is in progress.
- other(4) -> no test has been done."
::= { hm2CamActionGroup 2 }
hm2CamActionReplicationStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
unsuccessful(2),
pending(3),
other(4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"CAM replication was removed - function is no longer available."
::= { hm2CamActionGroup 3 }
--
-- *************************************************************
-- hm2CamPwdChangeGroup
-- *************************************************************
--
hm2CamPwdChangeUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user name of user whose password has to be changed on CAM server."
::= { hm2CamPwdChangeGroup 1 }
hm2CamPwdChangeUserPwOld OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set old password of user whose password has to be changed on CAM server."
::= { hm2CamPwdChangeGroup 2 }
hm2CamPwdChangeUserPwNew OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set new password of user whose password has to be changed on CAM server."
::= { hm2CamPwdChangeGroup 3 }
hm2CamPwdChangeAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
changePwd(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Execute password change of given user on CAM server.
- other -> no action, password is not changed on CAM server
- changePwd -> change password"
DEFVAL { other }
::= { hm2CamPwdChangeGroup 4 }
hm2CamPwdChangeActionStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
unsuccessful(2),
pending(3),
other(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of password change action on available CAM server.
- ok(1) -> password change successful.
- unsuccessful(2)-> password change unsuccessful.
- pending(3) -> password change is in progress.
- other(4) -> password change was never done."
::= { hm2CamPwdChangeGroup 5 }
--
-- *************************************************************
-- hm2CamCertInfoTable
-- *************************************************************
--
hm2CamCertInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hm2CamCertInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table ...."
::= { hm2CamCertInfoGroup 1 }
hm2CamCertInfoEntry OBJECT-TYPE
SYNTAX Hm2CamCertInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CAM ..."
INDEX { hm2CamCertInfoIndex }
::= { hm2CamCertInfoTable 1 }
Hm2CamCertInfoEntry ::= SEQUENCE {
hm2CamCertInfoIndex INTEGER,
hm2CamCertInfoPresent TruthValue,
hm2CamCertInfoExpiry SnmpAdminString,
hm2CamCertInfoIssuer SnmpAdminString,
hm2CamCertInfoSubject SnmpAdminString,
hm2CamCertInfoSerialNumber SnmpAdminString
}
hm2CamCertInfoIndex OBJECT-TYPE
SYNTAX INTEGER {
rootCert(1),
deviceCert(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for CAM certificate table."
::= { hm2CamCertInfoEntry 1 }
hm2CamCertInfoPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Certificate present on device."
::= { hm2CamCertInfoEntry 2 }
hm2CamCertInfoExpiry OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Expiry information of certificate."
::= { hm2CamCertInfoEntry 3 }
hm2CamCertInfoIssuer OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Issuer information of certificate."
::= { hm2CamCertInfoEntry 4 }
hm2CamCertInfoSubject OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subject information of certificate."
::= { hm2CamCertInfoEntry 5 }
hm2CamCertInfoSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number of certificate."
::= { hm2CamCertInfoEntry 6 }
--
-- ***********************************************************
-- hm2CamMgmtMibNotifications
-- ***********************************************************
--
hm2CamConfigStatusTrap NOTIFICATION-TYPE
OBJECTS { hm2CamClientServerIndex, hm2CamClientServerStatus }
STATUS current
DESCRIPTION
"This notification is send when authentication via CAM server is done."
::= { hm2CamMgmtMibNotifications 1 }
hm2CamReplicationStatusTrap NOTIFICATION-TYPE
OBJECTS { hm2CamClientServerIndex, hm2CamClientServerReplicationStatus }
STATUS obsolete
DESCRIPTION
"CAM replication was removed - function is no longer available."
::= { hm2CamMgmtMibNotifications 2 }
--
-- *************************************************************
-- hm2CamMgmtMibSnmpExtension groups
-- *************************************************************
--
hm2CamConfigSESGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibSnmpExtensionGroup 1 }
hm2CamActionSESGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibSnmpExtensionGroup 10 }
hm2CamPwdChangeSESGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibSnmpExtensionGroup 20 }
hm2CamCertInfoSESGroup OBJECT IDENTIFIER ::= { hm2CamMgmtMibSnmpExtensionGroup 30 }
--**************************************************************************************
-- hm2CamConfigSESGroup
--**************************************************************************************
hm2CamMgmtNoCaCertErrorReturn OBJECT-IDENTITY
STATUS current
DESCRIPTION
"CAM enable failed because no CA certificate is present."
::= { hm2CamConfigSESGroup 1 }
hm2CamMgmtTestConnErrorReturn OBJECT-IDENTITY
STATUS current
DESCRIPTION
"CAM enable failed because connection test failed."
::= { hm2CamConfigSESGroup 2 }
END
View Git Blame Copy Permalink