1859 lines
69 KiB
Plaintext
1859 lines
69 KiB
Plaintext
-- ==================================================================
|
|
-- Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
|
|
--
|
|
-- Description: Interface Management MIB
|
|
-- Reference:
|
|
-- Version: V3.8
|
|
-- History:
|
|
-- V1.0 (1) Created by Zhangshilin, 2001.06.29
|
|
-- (2) Revised by Qizhenglin, 2002.01.08
|
|
-- V1.1 2004/7/20 Add PortList and VlanIndex define
|
|
-- V1.2 2004/8/05 Add hwifEthernetIsolate and hwIsolateGroupMax
|
|
-- by Chenshixing
|
|
-- V1.3 2004/9/08 add fabric value to hwifVLANType object and
|
|
-- change the DESCRIPTION by chenshixing
|
|
-- 2004/9/08 1.change the DESCRIPTION and the range of
|
|
-- SYNTAX INTEGER from (5..100) to (1..100)
|
|
-- in hwifMcastControl object by wangyingxia
|
|
-- 2.add the hwifPpsMcastControl object
|
|
-- by wangyingxia
|
|
-- 3.change the status in hwLswVlanMngObject
|
|
-- to current by gaolong
|
|
-- V1.4 2004-10-12 updated by gaolong
|
|
-- Import TEXTUAL-CONVENTION, OBJECT-IDENTITY, Unsigned32.
|
|
-- Relocate hwLswL2InfMib MODULE-IDENTITY clause.
|
|
-- Change SYNTAX clause type of VlanIndex from INTEGER to Unsigned32.
|
|
-- Change MAX-ACCESS clause vlaue of hwifClearStat and hwifEthernetTest
|
|
-- from write-only to read-write.
|
|
-- Change value of hwifAggregateModel, hwdot1qVlanType, hwVlanInterfaceFrameType
|
|
-- and hwifEthernetMdi from underscores to hyphens.
|
|
-- Change value of hwifMacAddrLearnMode, beginning with lowercase.
|
|
-- V1.5 2004-11-15
|
|
-- Add the object hwdot1qVlanBcastSuppressionPPS by lihaijun
|
|
-- Adjust the format of the description of hwdot1qVlanBroadcastSuppression
|
|
-- V1.6 2004-12-2
|
|
-- Add the object hwGlobalBroadcastMaxPps by zhanggang
|
|
-- Add the object hwGlobalBroadcastMaxRatio by zhanggang
|
|
-- Add hwifVlanVPNStatus and hwBpduTunnelStatus by caiqiang
|
|
-- Add hwVlanInterfaceIpMethod by wangchao
|
|
-- V1.7 2005-01-22
|
|
-- Remove the content of hwLswVlan from this MIB to HUAWEI-LswVLAN-MIB
|
|
-- Remove SnmpAdminString
|
|
-- V1.8 2005-2-2
|
|
-- Add the object hwifPpsBcastDisValControl by zhangjianwei
|
|
-- V1.9 2005-03-08
|
|
-- Add hwifUniSuppressionStep, hwifPpsUniSuppressionMax, hwifMulSuppressionStep,
|
|
-- hwifPpsMulSuppressionMax, hwifUniSuppression, hwifPpsUniSuppression,
|
|
-- hwifMulSuppression, hwifPpsMulSuppression by wanghaisheng
|
|
-- V2.0 2005-06-14
|
|
-- Add the object hwifComboActivePort by majun and adjust format
|
|
-- V2.1 2005-06-30
|
|
-- Add the object hwifVlanVPNUplinkStatus, hwifVlanVPNTPID,
|
|
-- hwVlanVPNTPIDMode and hwVlanVPNTPID by hejunwei
|
|
-- Add hwifUnknownPacketDropMul, hwifUnknownPacketDropUni by wangyupeng
|
|
-- Add hwifBMbpsMulSuppressionMax, hwifBMbpsMulSuppression,
|
|
-- hwifBKbpsMulSuppressionMax, hwifBKbpsMulSuppressionStep
|
|
-- and hwifBKbpsMulSuppression by lichunyan
|
|
-- Update decription of MIB objects by gaolong
|
|
-- V2.2 2005-09-05
|
|
-- Add the object hwifIsolateGroupID, hwifisUplinkPort,
|
|
-- hwPortIsolateGroupTable, hwPortIsolateGroupEntry,
|
|
-- hwPortIsolateGroupIndex, hwPortIsolateUplinkIfIndex,
|
|
-- hwPortIsolateGroupRowStatus by huzinan
|
|
-- V2.3 2005-10-13
|
|
-- Add the object hwPortIsolateGroupDescription by hejunwei
|
|
-- V2.4 2005-11-15
|
|
-- Add the value 24000M to hwifEthernetSpeed by wanglirong
|
|
-- V2.5 2006-01-16
|
|
-- Add hwMaxMacLearnRange by zhangyinfei
|
|
-- Change the DESCRIPTION and the range of hwMaxMacLearn by zhangyinfei
|
|
-- V2.6 2006-01-03
|
|
-- Remove the value range from the definition of hwifXXBasePortIndex
|
|
-- by wangzhaoyan
|
|
-- V2.7 2006-02-11
|
|
-- Modify description of hwifXXBasePortIndex and hwifXXDevPortIndex
|
|
-- Modify description of hwifHybridTaggedVlanListLow, hwifHybridTaggedVlanListHigh,
|
|
-- hwifHybridUnTaggedVlanListLow and hwifHybridUnTaggedVlanListHigh
|
|
-- Modify some wrong format of the description
|
|
-- V2.8 2006-03-14
|
|
-- Add hwifEthernetAutoSpeedMask, hwifEthernetAutoSpeed in
|
|
-- hwethernetTable and SpeedModeFlag definition by Jin Yongfeng.
|
|
-- V2.9 2006-04-24
|
|
-- Remove value range of hwifEthernetMTU by Chenxi.
|
|
-- V3.0 2006-04-30
|
|
-- Add hwifBMbpsUniSuppressionMax, hwifBMbpsUniSuppression,
|
|
-- hwifBKbpsUniSuppressionMax, hwifBKbpsUniSuppressionStep
|
|
-- and hwifBKbpsUniSuppression by lichunyan.
|
|
-- V3.1 2006-09-27
|
|
-- hwifComboActivePort is obsoleted in hwifXXTable.
|
|
-- hwifComboPortTable is added for combo interface.
|
|
-- hwifComboActivePort is replaced with hwifComboPortCurActive.
|
|
-- V3.2 2009-04-11
|
|
-- Add hwifOutPayloadOctets, hwifInPayloadOctets, hwifInErrorPktsRate,
|
|
-- hwifInPkts, hwifInNormalPkts, hwifOutPkts by lisong.
|
|
-- V3.3 2011-11-08
|
|
-- Add the value s40000M and s100000M to SpeedModeFlag and
|
|
-- hwifEthernetSpeed by xiedong.
|
|
-- V3.4 2012-09-29
|
|
-- Modify description of hwifClearStat by xiedong.
|
|
-- 2012-11-03
|
|
-- Add hwifPktBufTable, hwifPktBufEntry, hwifPktBufFree,
|
|
-- hwifPktBufInit, hwifPktBufMin, hwifPktBufMiss by chenkaiping
|
|
-- V3.5 2013-08-17
|
|
-- Add hwifPortProtocolStatTable by yangxiaoren.
|
|
-- V3.6 2014-02-08
|
|
-- Modify description of hwifUniSuppression, hwifMulSuppression and
|
|
-- hwifMcastControl, modify value list of hwifMcastControl by huhonghui,
|
|
-- for supporting value 0.
|
|
-- V3.7 2015-10-14
|
|
-- Add hwifMulSuppressionFlag by chenzhouhui.
|
|
-- Modify description of hwifMulSuppression and hwifPpsMulSuppression by chenzhouhui.
|
|
-- Add hwifPktBufInDrop and hwifPktBufEgDrop to hwifPktBufTable,
|
|
-- add hwifQueuePktBufTable by zhangji.
|
|
-- V3.8 2016-07-02
|
|
-- Add the values s2500M, s5000M, s20000M, s25000M and s50000M to SpeedModeFlag
|
|
-- and hwifEthernetSpeed by yuhaiyan.
|
|
-- ==================================================================
|
|
--
|
|
-- Variables and types be imported
|
|
--
|
|
-- ==================================================================
|
|
HUAWEI-LswINF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
RowStatus, DisplayString, TruthValue, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64, Unsigned32, Counter32
|
|
FROM SNMPv2-SMI
|
|
ifIndex, InterfaceIndex
|
|
FROM IF-MIB
|
|
lswCommon
|
|
FROM HUAWEI-3COM-OID-MIB;
|
|
|
|
hwLswL2InfMib MODULE-IDENTITY
|
|
LAST-UPDATED "201607020000Z"
|
|
ORGANIZATION
|
|
"Hangzhou H3C Tech. Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team Hangzhou H3C Tech. Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.h3c.com
|
|
Zip:100085
|
|
"
|
|
DESCRIPTION
|
|
""
|
|
REVISION "201607020000Z"
|
|
DESCRIPTION
|
|
"Add the values s2500M, s5000M, s20000M, s25000M and s50000M to SpeedModeFlag and hwifEthernetSpeed"
|
|
REVISION "201510140000Z"
|
|
DESCRIPTION
|
|
"Add hwifPktBufInDrop and hwifPktBufEgDrop to hwifPktBufTable,
|
|
hwifMulSuppressionFlag, and hwifQueuePktBufTable, modify description of hwifMulSuppression and hwifPpsMulSuppression"
|
|
REVISION "200106290000Z"
|
|
DESCRIPTION
|
|
"Initial version."
|
|
::= { lswCommon 5 }
|
|
|
|
|
|
-- =============================================================
|
|
-- Textual Conventions
|
|
-- =============================================================
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
|
|
VlanIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value used to index per-VLAN tables: values of 0 and
|
|
4095 are not permitted; if the value is between 1 and
|
|
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
|
|
global scope within a given bridged domain (see VlanId
|
|
textual convention). If the value is greater than 4095
|
|
then it represents a VLAN with scope local to the
|
|
particular agent, i.e. one without a global VLAN-ID
|
|
assigned to it. Such VLANs are outside the scope of
|
|
IEEE 802.1Q but it is convenient to be able to manage them
|
|
in the same way using this MIB."
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
|
|
DropDirection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Representing the direction of dropping packets, if applicable."
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enableInbound (2),
|
|
enableOutbound (3),
|
|
enableBoth (4)
|
|
}
|
|
|
|
SpeedModeFlag ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Negotiable Speed mode."
|
|
SYNTAX BITS
|
|
{
|
|
s10M(0), -- 10M speed
|
|
s100M(1), -- 100M speed
|
|
s1000M(2), -- 1000M speed
|
|
s10000M(3), -- 10000M speed
|
|
s24000M(4), -- 24000M speed
|
|
s40000M(5), -- 40000M speed
|
|
s100000M(6), -- 100000M speed
|
|
s2500M(7), -- 2500M speed
|
|
s5000M(8), -- 5000M speed
|
|
s20000M(9), -- 20000M speed
|
|
s25000M(10), -- 25000M speed
|
|
s50000M(11) -- 50000M speed
|
|
}
|
|
|
|
|
|
-- ==================================================================
|
|
--
|
|
-- ======================= definition begin =========================
|
|
--
|
|
-- ==================================================================
|
|
hwLswExtInterface OBJECT IDENTIFIER ::= { lswCommon 1 }
|
|
|
|
hwifXXTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwIfXXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Extended interface information table."
|
|
::= { hwLswExtInterface 1 }
|
|
|
|
|
|
hwifXXEntry OBJECT-TYPE
|
|
SYNTAX HwIfXXEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entries of extended interface information table."
|
|
INDEX { ifIndex }
|
|
::= { hwifXXTable 1}
|
|
|
|
HwIfXXEntry ::=
|
|
SEQUENCE {
|
|
hwifUnBoundPort TruthValue ,
|
|
hwifISPhyPort TruthValue ,
|
|
hwifAggregatePort TruthValue ,
|
|
hwifMirrorPort TruthValue ,
|
|
hwifVLANType INTEGER ,
|
|
hwifMcastControl INTEGER ,
|
|
hwifFlowControl TruthValue ,
|
|
hwifSrcMacControl TruthValue ,
|
|
hwifClearStat INTEGER,
|
|
hwifXXBasePortIndex INTEGER,
|
|
hwifXXDevPortIndex INTEGER,
|
|
hwifPpsMcastControl Integer32,
|
|
hwifPpsBcastDisValControl INTEGER,
|
|
hwifUniSuppressionStep Integer32,
|
|
hwifPpsUniSuppressionMax Integer32,
|
|
hwifMulSuppressionStep Integer32,
|
|
hwifPpsMulSuppressionMax Integer32,
|
|
hwifUniSuppression Integer32,
|
|
hwifPpsUniSuppression Integer32,
|
|
hwifMulSuppression Integer32,
|
|
hwifPpsMulSuppression Integer32,
|
|
hwifComboActivePort INTEGER,
|
|
hwifBMbpsMulSuppressionMax Integer32,
|
|
hwifBMbpsMulSuppression Integer32,
|
|
hwifBKbpsMulSuppressionMax Integer32,
|
|
hwifBKbpsMulSuppressionStep Integer32,
|
|
hwifBKbpsMulSuppression Integer32,
|
|
hwifUnknownPacketDropMul DropDirection,
|
|
hwifUnknownPacketDropUni DropDirection,
|
|
hwifBMbpsUniSuppressionMax Integer32,
|
|
hwifBMbpsUniSuppression Integer32,
|
|
hwifBKbpsUniSuppressionMax Integer32,
|
|
hwifBKbpsUniSuppressionStep Integer32,
|
|
hwifBKbpsUniSuppression Integer32,
|
|
hwifOutPayloadOctets Counter64,
|
|
hwifInPayloadOctets Counter64,
|
|
hwifInErrorPktsRate Integer32,
|
|
hwifInPkts Counter64,
|
|
hwifInNormalPkts Counter64,
|
|
hwifOutPkts Counter64,
|
|
hwifMulSuppressionFlag INTEGER
|
|
}
|
|
|
|
|
|
hwifUnBoundPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether it is the unbound port. (true indicates that the port is
|
|
the main port of the aggregation or the port does not participate
|
|
in the aggregation.)"
|
|
::= { hwifXXEntry 1 }
|
|
|
|
|
|
hwifISPhyPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether it is a physical interface."
|
|
::= { hwifXXEntry 2 }
|
|
|
|
|
|
hwifAggregatePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether it is the aggregated port. (if the port participates
|
|
in the aggregation, this value is true.)"
|
|
::= { hwifXXEntry 3 }
|
|
|
|
|
|
hwifMirrorPort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Whether it is a mirror port."
|
|
::= { hwifXXEntry 4 }
|
|
|
|
|
|
hwifVLANType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
vLANTrunk (1),
|
|
access (2),
|
|
hybrid (3),
|
|
fabric (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port vlan types.
|
|
hybrid (3) port can carry multiple VLANs.
|
|
If fabric function is supported, fabric(4) means the port is
|
|
a fabric port."
|
|
::= { hwifXXEntry 5 }
|
|
|
|
|
|
hwifMcastControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast storm suppression with the step length of 1,
|
|
ranging from 0 to 100 percent.
|
|
In some products the step is 5, ranging from 0 to 100."
|
|
::= { hwifXXEntry 6 }
|
|
|
|
hwifFlowControl OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Flow control status."
|
|
::= { hwifXXEntry 7 }
|
|
|
|
|
|
hwifSrcMacControl OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether to filter by source MAC address."
|
|
::= { hwifXXEntry 8 }
|
|
|
|
|
|
hwifClearStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Clear specify port statistics. Operation read is not supported."
|
|
::= { hwifXXEntry 9 }
|
|
|
|
hwifXXBasePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index number of the port and the first port index of the
|
|
device is 1."
|
|
::= { hwifXXEntry 10 }
|
|
|
|
hwifXXDevPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Device index of the port."
|
|
::= { hwifXXEntry 11 }
|
|
|
|
hwifPpsMcastControl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The broadcast suppression with pps(packet per second) type.
|
|
The max value is determined by the port type and product."
|
|
::= { hwifXXEntry 12 }
|
|
|
|
hwifPpsBcastDisValControl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control the port's pps(packet per second) broadcast suppression.
|
|
When the port is enabled, its pps broadcast suppression value is the
|
|
global disperse value, and when disabled, it doesn't suppress broadcast."
|
|
::= { hwifXXEntry 13 }
|
|
|
|
hwifUniSuppressionStep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The step of unicast suppression in ratio mode."
|
|
::= { hwifXXEntry 14 }
|
|
|
|
hwifPpsUniSuppressionMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The max pps(packet per second) value of unicast suppression
|
|
in pps mode."
|
|
::= { hwifXXEntry 15 }
|
|
|
|
hwifMulSuppressionStep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The step of multicast suppression in ratio mode."
|
|
::= { hwifXXEntry 16 }
|
|
|
|
hwifPpsMulSuppressionMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The max pps(packet per second) value of multicast suppression
|
|
in pps mode."
|
|
::= { hwifXXEntry 17 }
|
|
|
|
hwifUniSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unicast suppression with the ranging from 0 to 100 percent
|
|
in ratio mode.
|
|
The step is determined by hwifUniSuppressionStep."
|
|
::= { hwifXXEntry 18 }
|
|
|
|
hwifPpsUniSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unicast suppression in pps(packet per second) mode.
|
|
The max value is determined by hwifPpsUniSuppressionMax."
|
|
::= { hwifXXEntry 19 }
|
|
|
|
hwifMulSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast suppression with ranging from 0 to 100 percent
|
|
in ratio mode.
|
|
The step is determined by hwifMulSuppressionStep.
|
|
If hwifMulSuppressionFlag is 2 it means only unknown
|
|
traffic suppression."
|
|
::= { hwifXXEntry 20 }
|
|
|
|
hwifPpsMulSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast suppression in pps(packet per second) mode.
|
|
The max pps value is determined by hwifPpsMulSuppressionMax.
|
|
If hwifMulSuppressionFlag is 2 it means only unknown
|
|
traffic suppression."
|
|
::= { hwifXXEntry 21 }
|
|
|
|
hwifComboActivePort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fiber (1), -- Optical port
|
|
copper (2), -- Electrical port
|
|
na (3) -- Not applicable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION "Active port on combo interface."
|
|
::= { hwifXXEntry 22 }
|
|
|
|
hwifBMbpsMulSuppressionMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of the multicast suppression with bandwidth-based(Mbps)
|
|
that a port can be configured."
|
|
::= { hwifXXEntry 23 }
|
|
|
|
hwifBMbpsMulSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"With bandwidth-based multicast suppression, the bandwidth is measured
|
|
in Mbps.
|
|
The upper limit of the multicast suppession with bandwidth-based(Mbps)
|
|
is the value of hwifBMbpsMulSuppressionMax in the entry.
|
|
The default value of hwifBMbpsMulSuppression is the value of
|
|
hwifBMbpsMulSuppressionMax."
|
|
::= { hwifXXEntry 24 }
|
|
|
|
hwifBKbpsMulSuppressionMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of the multicast suppression with bandwidth-based(Kbps)
|
|
that a port can be configured."
|
|
::= { hwifXXEntry 25 }
|
|
|
|
hwifBKbpsMulSuppressionStep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The step of multicast suppression with bandwidth-based(Kbps)."
|
|
::= { hwifXXEntry 26 }
|
|
|
|
hwifBKbpsMulSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"With bandwidth-based multicast suppression, the bandwidth
|
|
is measured in Kbps.
|
|
The upper limit of the multicast suppession with bandwidth-based(Kbps)
|
|
is the value of hwifBKbpsMulSuppressionMax in the entry.
|
|
The value of hwifBKbpsMulSuppression must be multiple of the
|
|
value of hwifBKbpsMulSuppressionStep.
|
|
The default value of hwifBKbpsMulSuppression is the value of
|
|
hwifBKbpsMulSuppressionMax."
|
|
::= { hwifXXEntry 27 }
|
|
|
|
hwifUnknownPacketDropMul OBJECT-TYPE
|
|
SYNTAX DropDirection
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control the port's unknown-multicast packets drop. When
|
|
inbound direction is enabled on this port, the port will
|
|
drop unknown-multicast packets in inbound direction. When
|
|
outbound direction is enabled on this port, the port will
|
|
drop unknown-multicast packets in outbound direction. When
|
|
both directions are enabled on this port, the port will
|
|
drop unknown-multicast packets in both inbound and outbound
|
|
directions."
|
|
DEFVAL { disable }
|
|
::= { hwifXXEntry 28 }
|
|
|
|
hwifUnknownPacketDropUni OBJECT-TYPE
|
|
SYNTAX DropDirection
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Control the port's unknown-unicast packets drop. When
|
|
inbound direction is enabled on this port, the port will
|
|
drop unknown-unicast packets in inbound direction. When
|
|
outbound direction is enabled on this port, the port will
|
|
drop unknown-unicast packets in outbound direction. When
|
|
both directions are enabled on this port, the port will
|
|
drop unknown-unicast packets in both inbound and outbound
|
|
directions."
|
|
DEFVAL { disable }
|
|
::= { hwifXXEntry 29 }
|
|
|
|
hwifBMbpsUniSuppressionMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The maximum value of the unicast suppression with bandwidth-based
|
|
(Mbps) that a port can be configured."
|
|
::= { hwifXXEntry 30 }
|
|
|
|
hwifBMbpsUniSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
With bandwidth-based Unicast suppression, the bandwidth is measured
|
|
in Mbps.
|
|
The upper limit of the unicast suppession with bandwidth-based(Mbps)
|
|
is the value of hwifBMbpsUniSuppressionMax in the entry.
|
|
The default value of hwifBMbpsUniSuppression is the value of
|
|
hwifBMbpsUniSuppressionMax."
|
|
::= { hwifXXEntry 31 }
|
|
|
|
hwifBKbpsUniSuppressionMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The maximum value of the unicast suppression with bandwidth-based
|
|
(Kbps) that a port can be configured."
|
|
::= { hwifXXEntry 32 }
|
|
|
|
hwifBKbpsUniSuppressionStep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The step of unicast suppression with bandwidth-based(Kbps)."
|
|
::= { hwifXXEntry 33 }
|
|
|
|
hwifBKbpsUniSuppression OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
With bandwidth-based unicast suppression, the bandwidth
|
|
is measured in Kbps.
|
|
The upper limit of the unicast suppession with bandwidth-based(Kbps)
|
|
is the value of hwifBKbpsUniSuppressionMax in the entry.
|
|
The value of hwifBKbpsUniSuppression must be multiple of the
|
|
value of hwifBKbpsUniSuppressionStep.
|
|
The default value of hwifBKbpsUniSuppression is the value of
|
|
hwifBKbpsUniSuppressionMax."
|
|
::= { hwifXXEntry 34 }
|
|
|
|
hwifOutPayloadOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The actual output octets of the interface."
|
|
::= { hwifXXEntry 35 }
|
|
|
|
hwifInPayloadOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The actual input octets of the interface."
|
|
::= { hwifXXEntry 36 }
|
|
|
|
hwifInErrorPktsRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The rate of inbound error packets on the interface."
|
|
::= { hwifXXEntry 37 }
|
|
|
|
hwifInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The number of packets received on the interface."
|
|
::= { hwifXXEntry 38 }
|
|
|
|
hwifInNormalPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The number of normal packets received on the interface."
|
|
::= { hwifXXEntry 39 }
|
|
|
|
hwifOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The number of packets sent on the interface."
|
|
::= { hwifXXEntry 40 }
|
|
|
|
hwifMulSuppressionFlag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
all (1), -- known and unknown traffic
|
|
unknown (2) -- only unknown traffic
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
The multicast suppression flag. If only unknown multicast
|
|
traffic is suppressed, the value is unknown(2), and all(1) for suppression of all traffic (unknown and known)."
|
|
::= { hwifXXEntry 41 }
|
|
|
|
hwifAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwIfAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port aggregation information table."
|
|
::= { hwLswExtInterface 2 }
|
|
|
|
|
|
hwifAggregateEntry OBJECT-TYPE
|
|
SYNTAX HwIfAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Port aggregation information table."
|
|
INDEX { hwifAggregatePortIndex }
|
|
::= { hwifAggregateTable 1}
|
|
|
|
HwIfAggregateEntry ::=
|
|
SEQUENCE {
|
|
hwifAggregatePortIndex InterfaceIndex,
|
|
hwifAggregatePortName OCTET STRING,
|
|
hwifAggregatePortListPorts PortList,
|
|
hwifAggregateModel INTEGER,
|
|
hwifAggregateOperStatus RowStatus
|
|
}
|
|
|
|
|
|
|
|
hwifAggregatePortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index number of the main aggregated port."
|
|
::= { hwifAggregateEntry 1 }
|
|
|
|
|
|
hwifAggregatePortName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Aggregation group name."
|
|
::= { hwifAggregateEntry 2 }
|
|
|
|
|
|
hwifAggregatePortListPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Portlist of a aggregating."
|
|
::= { hwifAggregateEntry 3 }
|
|
|
|
|
|
hwifAggregateModel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ingress (1),
|
|
both (2),
|
|
round-robin (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Load sharing mode for the port aggregation."
|
|
::= { hwifAggregateEntry 4 }
|
|
|
|
|
|
hwifAggregateOperStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Current operation status of the row."
|
|
::= { hwifAggregateEntry 5 }
|
|
|
|
-- ==================================================================
|
|
hwifHybridPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwifHybridPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Hybrid-port configuration table."
|
|
::= { hwLswExtInterface 3 }
|
|
|
|
|
|
hwifHybridPortEntry OBJECT-TYPE
|
|
SYNTAX HwifHybridPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Hybrid-port configuration table."
|
|
INDEX { hwifHybridPortIndex }
|
|
::= { hwifHybridPortTable 1}
|
|
|
|
HwifHybridPortEntry ::=
|
|
SEQUENCE {
|
|
hwifHybridPortIndex INTEGER,
|
|
hwifHybridTaggedVlanListLow OCTET STRING,
|
|
hwifHybridTaggedVlanListHigh OCTET STRING,
|
|
hwifHybridUnTaggedVlanListLow OCTET STRING,
|
|
hwifHybridUnTaggedVlanListHigh OCTET STRING
|
|
}
|
|
|
|
|
|
|
|
hwifHybridPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index number of Hybrid-port."
|
|
::= { hwifHybridPortEntry 1 }
|
|
|
|
|
|
hwifHybridTaggedVlanListLow OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 1 through
|
|
8, the second octet specifying VLANs 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each tagged VLAN
|
|
of the hybrid port is represented by a single bit within
|
|
the value of this object. If that bit has a value of '1'
|
|
then that VLAN is tagged in the set of VLANs; the VLAN
|
|
is not tagged if its bit has a value of '0'."
|
|
::= { hwifHybridPortEntry 2 }
|
|
|
|
|
|
hwifHybridTaggedVlanListHigh OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 2049 through
|
|
2056, the second octet specifying VLANs 2057 through 2064,
|
|
etc. Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each tagged VLAN
|
|
of the hybrid port is represented by a single bit within
|
|
the value of this object. If that bit has a value of '1'
|
|
then that VLAN is tagged in the set of VLANs; the VLAN
|
|
is not tagged if its bit has a value of '0'."
|
|
::= { hwifHybridPortEntry 3 }
|
|
|
|
|
|
hwifHybridUnTaggedVlanListLow OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 1 through
|
|
8, the second octet specifying VLANs 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each untagged
|
|
VLAN of the hybrid port is represented by a single bit
|
|
within the value of this object. If that bit has a value
|
|
of '1' then that VLAN is untagged in the set of VLANs; the
|
|
VLAN is not untagged if its bit has a value of '0'."
|
|
::= { hwifHybridPortEntry 4 }
|
|
|
|
|
|
hwifHybridUnTaggedVlanListHigh OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 2049 through
|
|
2056, the second octet specifying VLANs 2057 through 2064,
|
|
etc. Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each untagged
|
|
VLAN of the hybrid port is represented by a single bit
|
|
within the value of this object. If that bit has a value of
|
|
'1' then that VLAN is untagged in the set of VLANs; the VLAN
|
|
is not untagged if its bit has a value of '0'."
|
|
::= { hwifHybridPortEntry 5 }
|
|
|
|
-- ==================== Combo port table ============================
|
|
hwifComboPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwifComboPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Combo-port table."
|
|
::= { hwLswExtInterface 4 }
|
|
|
|
hwifComboPortEntry OBJECT-TYPE
|
|
SYNTAX HwifComboPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry of hwifComboPortTable."
|
|
INDEX { hwifComboPortIndex }
|
|
::= { hwifComboPortTable 1}
|
|
|
|
HwifComboPortEntry ::=
|
|
SEQUENCE {
|
|
hwifComboPortIndex InterfaceIndex,
|
|
hwifComboPortCurActive INTEGER
|
|
}
|
|
|
|
hwifComboPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The combo-port interface index. Its value is the same as the value
|
|
of ifIndex in ifTable, but only includes indexes of the combo-port
|
|
interfaces."
|
|
::= { hwifComboPortEntry 1 }
|
|
|
|
hwifComboPortCurActive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fiber (1), -- Optical port
|
|
copper (2), -- Electrical port
|
|
na (3) -- Not applicable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current active interface of combo interfaces. The value 'fiber'
|
|
means the interface with fiber connector of the pair of combo-port
|
|
interfaces is active. The value 'copper' means the interface with
|
|
copper connector of the pair is active. The value 'na' means not
|
|
supported."
|
|
::= { hwifComboPortEntry 2 }
|
|
|
|
-- ======================pkt buf table===============================
|
|
hwifPktBufTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwifPktBufEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Packet buffer table."
|
|
::= { hwLswExtInterface 5 }
|
|
|
|
hwifPktBufEntry OBJECT-TYPE
|
|
SYNTAX HwifPktBufEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry of hwifPktBufTable."
|
|
INDEX { ifIndex }
|
|
::= { hwifPktBufTable 1}
|
|
|
|
HwifPktBufEntry ::=
|
|
SEQUENCE {
|
|
hwifPktBufFree Integer32,
|
|
hwifPktBufInit Integer32,
|
|
hwifPktBufMin Integer32,
|
|
hwifPktBufMiss Counter64,
|
|
hwifPktBufInDrop Counter64,
|
|
hwifPktBufEgDrop Counter64
|
|
}
|
|
|
|
hwifPktBufFree OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packet buffers available for the interface."
|
|
::= { hwifPktBufEntry 1 }
|
|
|
|
hwifPktBufInit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packet buffers allocated when the interface was created."
|
|
::= { hwifPktBufEntry 2 }
|
|
|
|
hwifPktBufMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smallest number of packet buffers available for the interface."
|
|
::= { hwifPktBufEntry 3 }
|
|
|
|
hwifPktBufMiss OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that the interface failed to obtain a packet
|
|
buffer. Failure to obtain a buffer indicates that buffers were busy."
|
|
::= { hwifPktBufEntry 4 }
|
|
|
|
hwifPktBufInDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ingress packets dropped by the interface
|
|
because of insufficient data buffer."
|
|
::= { hwifPktBufEntry 5 }
|
|
|
|
hwifPktBufEgDrop OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of egress packets dropped by the interface
|
|
because of insufficient data buffer."
|
|
::= { hwifPktBufEntry 6 }
|
|
|
|
-- ======================if queue pkt buf table===============================
|
|
hwifQueuePktBufTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwifQueuePktBufEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "802.1p queue of the interface packet buffer table."
|
|
::= { hwLswExtInterface 6 }
|
|
|
|
hwifQueuePktBufEntry OBJECT-TYPE
|
|
SYNTAX HwifQueuePktBufEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry of hwifQueuePktBufTable."
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
hwifQueueId
|
|
}
|
|
::= { hwifQueuePktBufTable 1}
|
|
|
|
HwifQueuePktBufEntry ::=
|
|
SEQUENCE {
|
|
hwifQueueId Integer32,
|
|
hwifQueuePktBufTotal Unsigned32,
|
|
hwifQueueBufUsed Unsigned32,
|
|
hwifQueueBufThreCount Counter32
|
|
}
|
|
|
|
hwifQueueId OBJECT-TYPE
|
|
SYNTAX Integer32(1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1p queue ID of the interface. This value is
|
|
used to specify the queue ID of the interface
|
|
when the user wants to read one queue of the interface.
|
|
The index number 1-8 correspond with 802.1p queue ID 0-7."
|
|
::= { hwifQueuePktBufEntry 1 }
|
|
|
|
hwifQueuePktBufTotal OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packet buffers available for the interface,
|
|
including fixed buffer and shared buffer."
|
|
::= { hwifQueuePktBufEntry 2 }
|
|
|
|
hwifQueueBufUsed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packet buffers that have been used for each
|
|
802.1p queue of the interface."
|
|
::= { hwifQueuePktBufEntry 3 }
|
|
|
|
hwifQueueBufThreCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that each 802.1p queue of the interface has
|
|
exceeded the buffer threshold. The threshold is configurated by user."
|
|
::= { hwifQueuePktBufEntry 4 }
|
|
|
|
-- ========================l2========================================
|
|
hwLswL2InfMibObject OBJECT IDENTIFIER ::= { hwLswL2InfMib 1 }
|
|
|
|
hwSlotPortMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Max ports of the slots."
|
|
::= { hwLswL2InfMibObject 1 }
|
|
|
|
hwSwitchPortMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Max ports that this switch includes."
|
|
::= { hwLswL2InfMibObject 2 }
|
|
|
|
hwifVLANTrunkStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwIfVLANTrunkStatusEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Gvrp attributes on the VlanTrunk port."
|
|
::= { hwLswL2InfMibObject 3 }
|
|
|
|
hwifVLANTrunkStatusEntry OBJECT-TYPE
|
|
SYNTAX HwIfVLANTrunkStatusEntry
|
|
MAX-ACCESS not-accessible STATUS current
|
|
DESCRIPTION "Gvrp attributes on the VlanTrunk port."
|
|
INDEX { hwifVLANTrunkIndex }
|
|
::= { hwifVLANTrunkStatusTable 1}
|
|
|
|
HwIfVLANTrunkStatusEntry ::=
|
|
SEQUENCE {
|
|
hwifVLANTrunkIndex InterfaceIndex,
|
|
hwifVLANTrunkGvrpRegistration INTEGER,
|
|
hwifVLANTrunkPassListLow OCTET STRING,
|
|
hwifVLANTrunkPassListHigh OCTET STRING,
|
|
hwifVLANTrunkAllowListLow OCTET STRING,
|
|
hwifVLANTrunkAllowListHigh OCTET STRING
|
|
}
|
|
|
|
|
|
|
|
hwifVLANTrunkIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index number of the VLANTrunk interface."
|
|
::= { hwifVLANTrunkStatusEntry 1 }
|
|
|
|
|
|
hwifVLANTrunkGvrpRegistration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal (1),
|
|
fixed (2),
|
|
forbidden (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GVRP registration information
|
|
normal: This is the default configuration. Allow create, register
|
|
and unregister vlans dynamiclly at this port.
|
|
fixed: Aallow create and register vlan manually at this port.
|
|
Prevent from unregistering vlans or registering known
|
|
vlans of this port at another trunk port.
|
|
forbidden: Unregister all vlans but vlan 1, forbid to create or
|
|
register any other vlans at this port."
|
|
::= { hwifVLANTrunkStatusEntry 2 }
|
|
|
|
|
|
hwifVLANTrunkPassListLow OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 1 through
|
|
8, the second octet specifying VLANs 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each actually
|
|
passed VLAN of the trunk port is represented by a single
|
|
bit within the value of this object. If that bit has a
|
|
value of '1' then that VLAN is actually passed in the set
|
|
of VLANs; the VLAN is not actually passed if its bit has
|
|
a value of '0'."
|
|
::= { hwifVLANTrunkStatusEntry 4 }
|
|
|
|
hwifVLANTrunkPassListHigh OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 2049 through
|
|
2056, the second octet specifying VLANs 2057 through 2064,
|
|
etc. Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each actually
|
|
passed VLAN of the trunk port is represented by a single
|
|
bit within the value of this object. If that bit has a
|
|
value of '1' then that VLAN is actually passed in the set
|
|
of VLANs; the VLAN is not actually passed if its bit has
|
|
a value of '0'."
|
|
::= { hwifVLANTrunkStatusEntry 5 }
|
|
|
|
hwifVLANTrunkAllowListLow OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 1 through
|
|
8, the second octet specifying VLANs 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each allowed
|
|
VLAN of the trunk port is represented by a single bit
|
|
within the value of this object. If that bit has a value
|
|
of '1' then that VLAN is allowed in the set of VLANs;
|
|
the VLAN is not allowed if its bit has a value of '0'."
|
|
::= { hwifVLANTrunkStatusEntry 6 }
|
|
|
|
hwifVLANTrunkAllowListHigh OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Each octet within this value specifies a set of eight
|
|
VLANs, with the first octet specifying VLANs 2049 through
|
|
2056, the second octet specifying VLANs 2057 through 2064,
|
|
etc. Within each octet, the most significant bit represents
|
|
the highest numbered VLAN, and the least significant bit
|
|
represents the lowest numbered VLAN. Thus, each allowed
|
|
VLAN of the trunk port is represented by a single bit within
|
|
the value of this object. If that bit has a value of '1'
|
|
then that VLAN is allowed in the set of VLANs; the VLAN is
|
|
not allowed if its bit has a value of '0'."
|
|
::= { hwifVLANTrunkStatusEntry 7 }
|
|
|
|
|
|
|
|
|
|
hwethernetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwEthernetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Ethernet port attribute table."
|
|
::= { hwLswL2InfMibObject 4 }
|
|
|
|
|
|
hwethernetEntry OBJECT-TYPE
|
|
SYNTAX HwEthernetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entries of Ethernet port attribute table"
|
|
INDEX { ifIndex }
|
|
::= { hwethernetTable 1}
|
|
|
|
HwEthernetEntry ::=
|
|
SEQUENCE {
|
|
hwifEthernetDuplex INTEGER,
|
|
hwifEthernetMTU INTEGER,
|
|
hwifEthernetSpeed INTEGER,
|
|
hwifEthernetMdi INTEGER,
|
|
hwMaxMacLearn INTEGER,
|
|
hwifMacAddressLearn INTEGER,
|
|
hwifEthernetTest INTEGER,
|
|
hwifMacAddrLearnMode INTEGER,
|
|
hwifEthernetFlowInterval INTEGER,
|
|
hwifEthernetIsolate OCTET STRING,
|
|
hwifVlanVPNStatus INTEGER,
|
|
hwifVlanVPNUplinkStatus INTEGER,
|
|
hwifVlanVPNTPID Integer32,
|
|
hwifIsolateGroupID Integer32,
|
|
hwifisUplinkPort INTEGER,
|
|
hwifEthernetAutoSpeedMask SpeedModeFlag,
|
|
hwifEthernetAutoSpeed SpeedModeFlag
|
|
}
|
|
|
|
hwifEthernetDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
full (1),
|
|
half (2),
|
|
auto (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ethernet interface mode."
|
|
::= { hwethernetEntry 3 }
|
|
|
|
|
|
hwifEthernetMTU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "MTU on the Ethernet interface."
|
|
::= { hwethernetEntry 4 }
|
|
|
|
|
|
hwifEthernetSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto (0),
|
|
s10M (10),
|
|
s100M (100),
|
|
s1000M (1000),
|
|
s2500M (2500),
|
|
s5000M (5000),
|
|
s10000M (10000),
|
|
s24000M (24000),
|
|
s40000M (40000),
|
|
s20000M (20000),
|
|
s25000M (25000),
|
|
s50000M (50000),
|
|
s100000M (100000)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Ethernet interface speed."
|
|
::= { hwethernetEntry 5 }
|
|
|
|
hwifEthernetMdi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mdi-ii (1),
|
|
mdi-x (2),
|
|
mdi-auto (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the line connected to the port.
|
|
MDI-II (straight-through cable): 1
|
|
MDI-X (crossover cable): 2
|
|
MDI-AUTO (auto-sensing): 3"
|
|
::= { hwethernetEntry 7 }
|
|
|
|
hwMaxMacLearn OBJECT-TYPE
|
|
SYNTAX INTEGER(-1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of MAC addresses that the port can learn.
|
|
The value -1 means that the number of Mac addresses that the port
|
|
can learn is unlimited."
|
|
::= { hwethernetEntry 8 }
|
|
|
|
hwifMacAddressLearn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates if the interface is allowed to learn mac address.
|
|
eanbled(1) means the interface can learn mac address, otherwise disabled(2)
|
|
can be set."
|
|
::= { hwethernetEntry 9 }
|
|
|
|
hwifEthernetTest OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
test(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test this interface.
|
|
The actual testing will be different according to products.
|
|
Read operation not supported."
|
|
::= { hwethernetEntry 10 }
|
|
|
|
hwifMacAddrLearnMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
iVL(1),
|
|
sVL(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status indicates mac address learn mode of the interface.
|
|
IVL(1) means independent VLAN learning.
|
|
SVL means shared VLAN learning."
|
|
::= { hwethernetEntry 11 }
|
|
|
|
hwifEthernetFlowInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (5..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set flow interval of the ethernet.
|
|
The NMS should set value to integer which is a multiple of 5."
|
|
::= { hwethernetEntry 12 }
|
|
|
|
hwifEthernetIsolate OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Isolate group means that all ports in the same isolate group can not
|
|
send and receive packets each other.
|
|
Each octet within this value specifies a set of eight isolate groups,
|
|
with the first octet specifying isolate groups 1 through 8, the second
|
|
octet specifying isolate groups 9 through 16, etc. Within each octet,
|
|
the leftmost bit is the first bit.
|
|
the first bit represents the lowest numbered isolate group, and the
|
|
last bit represents the highest numbered isolate group. one port can
|
|
belong to more than one isolate group.
|
|
Thus, each isolate group is represented by a single bit within the
|
|
value of this object.
|
|
If that bit has a value of '1', then that isolate group includes this port;
|
|
the port is not included if its bit has a value of '0'.
|
|
for example, the first octet is '10000100' means that the port is
|
|
included in the isolate group 1 and isolate group 6."
|
|
::= { hwethernetEntry 13 }
|
|
|
|
hwifVlanVPNStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan VPN enable status."
|
|
::= { hwethernetEntry 14 }
|
|
|
|
hwifVlanVPNUplinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Vlan VPN uplink status."
|
|
::= { hwethernetEntry 15 }
|
|
|
|
hwifVlanVPNTPID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port based Vlan VPN TPID(Tag Protocol Indentifier), default value
|
|
is 0x8100.
|
|
Please refer to hwVlanVPNTPIDMode to get more information."
|
|
::= { hwethernetEntry 16 }
|
|
|
|
hwifIsolateGroupID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Isolate group identifier. Value zero means this interface does not
|
|
belong to any isolate group."
|
|
::= { hwethernetEntry 17 }
|
|
|
|
hwifisUplinkPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ethernet uplink status, default value is 2."
|
|
::= { hwethernetEntry 18 }
|
|
|
|
hwifEthernetAutoSpeedMask OBJECT-TYPE
|
|
SYNTAX SpeedModeFlag
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies which kinds of speed mode can be negotiated.
|
|
Each bit corresponds to a kind of speed mode.
|
|
|
|
If the value of a bit is '1', it means the corresponding speed mode
|
|
is negotiable on the port. Otherwise the negotiation for that
|
|
kind of speed mode is not supported on this port. If there are
|
|
several negotiable speed modes, all bits for them are '1'.
|
|
For example, if the speed mode 's10M' and 's1000M' can be negotiable,
|
|
the value of this object is 0xA0."
|
|
::= { hwethernetEntry 19 }
|
|
|
|
hwifEthernetAutoSpeed OBJECT-TYPE
|
|
SYNTAX SpeedModeFlag
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates which kinds of speed mode are negotiable
|
|
on this port.
|
|
|
|
Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding
|
|
bit of this object can be set to '1', indicating the corresponding
|
|
speed mode is negotiable.
|
|
|
|
For example, if the value of hwifEthernetAutoSpeedMask is 0xA0,
|
|
which indicates speed mode 's10M' and 's1000M' are negotiable,
|
|
the possible value of this object should be one of the four values
|
|
(0x00, 0x20, 0x80 and 0xA0).
|
|
|
|
If the value of hwifEthernetSpeed is not 'auto', the value of this
|
|
object is insignificant and should be ignored. The value length of
|
|
this object should be as long as that of hwifEthernetAutoSpeedMask."
|
|
::= { hwethernetEntry 20 }
|
|
|
|
hwIsolateGroupMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max isolate group that this device support, the value is zero
|
|
means that the device does not support isolate group."
|
|
::= { hwLswL2InfMibObject 5 }
|
|
|
|
hwGlobalBroadcastMaxPps OBJECT-TYPE
|
|
SYNTAX INTEGER (0..14881000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global max packets per second. When it is set, the value of
|
|
BroadcastMaxPps in all ports will be changed to that setting."
|
|
::= { hwLswL2InfMibObject 6 }
|
|
|
|
hwGlobalBroadcastMaxRatio OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global max-ratio of broadcast from 0 to 100 percent.
|
|
When it is set, the value of BroadcastMaxRatio in all ports
|
|
will be changed to that setting."
|
|
::= { hwLswL2InfMibObject 7 }
|
|
|
|
hwBpduTunnelStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Bpdu tunnel enable status."
|
|
::= { hwLswL2InfMibObject 8 }
|
|
|
|
hwVlanVPNTPIDMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
port-based(1),
|
|
global(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan VPN TPID mode.
|
|
|
|
The value 'port-based' means VLAN VPN TPID value would be set based
|
|
on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is
|
|
meaningless and always return 0x8100.
|
|
|
|
The value 'global' means VLAN VPN TPID value should be set globally
|
|
via hwVlanVPNTPID. In this situation, hwifVlanVPNTPID in hwethernetTable
|
|
has the same value with hwVlanVPNTPID."
|
|
::= { hwLswL2InfMibObject 9 }
|
|
|
|
hwVlanVPNTPID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Global Vlan VPN TPID(Tag Protocol Indentifier), default value
|
|
is 0x8100."
|
|
::= { hwLswL2InfMibObject 10 }
|
|
|
|
hwPortIsolateGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwPortIsolateGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Isolate Group attribute table."
|
|
::= { hwLswL2InfMibObject 11 }
|
|
|
|
|
|
hwPortIsolateGroupEntry OBJECT-TYPE
|
|
SYNTAX HwPortIsolateGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry of hwPortIsolateGroupTable."
|
|
INDEX { hwPortIsolateGroupIndex }
|
|
::= { hwPortIsolateGroupTable 1 }
|
|
|
|
HwPortIsolateGroupEntry ::=
|
|
SEQUENCE {
|
|
hwPortIsolateGroupIndex Integer32,
|
|
hwPortIsolateUplinkIfIndex InterfaceIndex,
|
|
hwPortIsolateGroupRowStatus RowStatus,
|
|
hwPortIsolateGroupDescription DisplayString
|
|
}
|
|
|
|
hwPortIsolateGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port isolate group identifier.
|
|
The index of the hwPortIsolateGroupTable.
|
|
The value ranges from 1 to the limit of isolate group quantity."
|
|
::= { hwPortIsolateGroupEntry 1 }
|
|
|
|
hwPortIsolateUplinkIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Index number of the uplink interface."
|
|
::= { hwPortIsolateGroupEntry 2 }
|
|
|
|
hwPortIsolateGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current operation status of the row."
|
|
::= { hwPortIsolateGroupEntry 3 }
|
|
|
|
hwPortIsolateGroupDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port isolate group description, default value is zero-length string."
|
|
::= { hwPortIsolateGroupEntry 4 }
|
|
|
|
hwMaxMacLearnRange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The maximum number of MAC address that the port supports."
|
|
::= { hwLswL2InfMibObject 12 }
|
|
|
|
|
|
hwifPortProtocolStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwifPortProtocolStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects of port statistics information based on
|
|
IPv4 and IPv6 protocols."
|
|
::= { hwLswL2InfMibObject 13 }
|
|
|
|
hwifPortProtocolStatEntry OBJECT-TYPE
|
|
SYNTAX HwifPortProtocolStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The entry of hwifPortProtocolStatTable."
|
|
INDEX { ifIndex }
|
|
::= { hwifPortProtocolStatTable 1 }
|
|
|
|
HwifPortProtocolStatEntry ::=
|
|
SEQUENCE {
|
|
hwifIPv4InOctets Counter64,
|
|
hwifIPv4InUcastPkts Counter64,
|
|
hwifIPv4InMultiPkts Counter64,
|
|
hwifIPv4InBroadcastPkts Counter64,
|
|
hwifIPv4InDiscards Counter64,
|
|
hwifIPv4InErrors Counter64,
|
|
hwifIPv4OutOctets Counter64,
|
|
hwifIPv4OutUcastPkts Counter64,
|
|
hwifIPv4OutMultiPkts Counter64,
|
|
hwifIPv4OutBroadcastPkts Counter64,
|
|
hwifIPv4OutDiscards Counter64,
|
|
hwifIPv4OutErrors Counter64,
|
|
hwifIPv6InOctets Counter64,
|
|
hwifIPv6InUcastPkts Counter64,
|
|
hwifIPv6InMultiPkts Counter64,
|
|
hwifIPv6InAnycastPkts Counter64,
|
|
hwifIPv6InDiscards Counter64,
|
|
hwifIPv6InErrors Counter64,
|
|
hwifIPv6OutOctets Counter64,
|
|
hwifIPv6OutUcastPkts Counter64,
|
|
hwifIPv6OutMultiPkts Counter64,
|
|
hwifIPv6OutAnycastPkts Counter64,
|
|
hwifIPv6OutDiscards Counter64,
|
|
hwifIPv6OutErrors Counter64
|
|
}
|
|
hwifIPv4InOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of octets based on IPv4 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 1 }
|
|
|
|
hwifIPv4InUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of unicast packets based on IPv4 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 2 }
|
|
|
|
hwifIPv4InMultiPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of multicast packets based on IPv4 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 3 }
|
|
|
|
hwifIPv4InBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of broadcast packets based on IPv4 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 4 }
|
|
|
|
hwifIPv4InDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of discard packets based on IPv4 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 5 }
|
|
|
|
hwifIPv4InErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of error packets based on IPv4 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 6 }
|
|
|
|
hwifIPv4OutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of octets based on IPv4 transmitted out of the interface."
|
|
::= { hwifPortProtocolStatEntry 7 }
|
|
|
|
hwifIPv4OutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of unicast packets based on IPv4 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 8 }
|
|
|
|
hwifIPv4OutMultiPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of multicast packets based on IPv4 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 9 }
|
|
|
|
hwifIPv4OutBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of broadcast packets based on IPv4 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 10 }
|
|
|
|
hwifIPv4OutDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of discard packets based on IPv4 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 11 }
|
|
|
|
hwifIPv4OutErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of error packets based on IPv4 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 12 }
|
|
|
|
hwifIPv6InOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of octets based on IPv6 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 13 }
|
|
|
|
hwifIPv6InUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of unicast packets based on IPv6 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 14 }
|
|
|
|
hwifIPv6InMultiPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of multicast packets based on IPv6 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 15 }
|
|
|
|
hwifIPv6InAnycastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of anycast packets based on IPv6 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 16 }
|
|
|
|
hwifIPv6InDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of discard packets based on IPv6 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 17 }
|
|
|
|
hwifIPv6InErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of error packets based on IPv6 received on the interface."
|
|
::= { hwifPortProtocolStatEntry 18 }
|
|
|
|
hwifIPv6OutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of octets based on IPv6 transmitted of the interface."
|
|
::= { hwifPortProtocolStatEntry 19 }
|
|
|
|
hwifIPv6OutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of unicast packets based on IPv6 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 20 }
|
|
|
|
hwifIPv6OutMultiPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of multicast packets based on IPv6 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 21 }
|
|
|
|
hwifIPv6OutAnycastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of anycast packets based on IPv6 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 22 }
|
|
|
|
hwifIPv6OutDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of discard packets based on IPv6 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 23 }
|
|
|
|
hwifIPv6OutErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of error packets based on IPv6 transmitted out of the
|
|
interface."
|
|
::= { hwifPortProtocolStatEntry 24 }
|
|
END
|